NXOpen.UF.UFSf._1d_mesh_data_ | Wrapper for UF_SF_1d_mesh_data_s |
NXOpen.UF.UFMotion._2D_contact_ | Wrapper for UF_MOTION_2D_contact_s |
NXOpen.UF.UFMotion._3D_contact_ | Wrapper for UF_MOTION_3D_contact_s |
NXOpen.UF.UFMb.Action | Wrapper for UF_MB_action_s |
NXOpen.RuleManager.AdoptableTypes | Used to return adoptable object types |
NXOpen.UF.UFBound.AllData | Wrapper for UF_BOUND_all_data_s |
NXOpen.UF.UFUdobj.AllData | Wrapper for UF_UDOBJ_all_data_s |
NXOpen.PDM.AlternateIdManager.AlternateIdsData | Contains alternate Ids data |
NXOpen.UF.UFCurve.AnalysisDisplay | Wrapper for UF_CURVE_analysis_display_s |
NXOpen.CAE.Post.Animation | Animation settings |
NXOpen.CAE.Post.AnimationParameters | Animation settings |
NXOpen.CAE.Post.AnimationStreamline | Animation settings for streamline animation |
NXOpen.CAE.Post.AnnotationBox | Annotation box display settings |
NXOpen.UF.UFGdt.AnnotationTags | Wrapper for UF_GDT_annotation_tags_s |
NXOpen.UF.UFCambnd.AppData | Wrapper for UF_CAMBND_app_data_s |
NXOpen.UF.UFCamgeom.AppData | Wrapper for UF_CAMGEOM_app_data_s |
NXOpen.UF.UFOprbnd.AppData | Wrapper for UF_OPRBND_app_data_s |
NXOpen.UF.UFDrf.AppendedText | Wrapper for UF_DRF_appended_text_s |
NXOpen.UF.UFModlTrex.ApplData | Wrapper for UF_MODL_TREX_appl_data_s |
NXOpen.UF.UFMb.ApplicationData | Wrapper for UF_MB_application_data_s |
NXOpen.UF.UFRoute.AppViewDesc | Wrapper for UF_ROUTE_app_view_desc_s |
NXOpen.UF.UFCurve.Arc | Wrapper for UF_CURVE_arc_s |
NXOpen.UF.UFEval.Arc | Wrapper for UF_EVAL_arc_s |
NXOpen.UF.UFDrf.ArcInfo | Wrapper for UF_DRF_arc_info_s |
NXOpen.UF.UFDrf.Areafill | Wrapper for UF_DRF_areafill_s |
NXOpen.UF.Args | Wrapper for UF_args_s |
NXOpen.UF.UFDrf.ArrowInfo | Wrapper for UF_DRF_arrow_info_s |
NXOpen.UF.UFDraw.ArrowParms | Wrapper for UF_DRAW_arrow_parms_s |
NXOpen.CAE.Post.ASCIIDiffTolerances | Tolerances used for comparing postview ASCII display files |
NXOpen.PDM.AlternateIdManager.AssignAlternateRevData | Contains alternate Revision Id data |
NXOpen.UF.UFDrf.AssociativeOrigin | Wrapper for UF_DRF_associative_origin_s |
NXOpen.Annotations.Annotation.AssociativeOriginData | Describes the geometry that an annotation's origin is associated with |
NXOpen.UF.UFDrf.AssocInfo | Wrapper for UF_DRF_assoc_info_s |
NXOpen.UF.UFDrf.AssortpartArc | Wrapper for UF_DRF_assortpart_arc_s |
NXOpen.UF.UFDrf.AssortpartArrow | Wrapper for UF_DRF_assortpart_arrow_s |
NXOpen.UF.UFDrf.AssortpartLine | Wrapper for UF_DRF_assortpart_line_s |
NXOpen.UF.UFDrf.AssortpartText | Wrapper for UF_DRF_assortpart_text_s |
NXOpen.UF.UFUi.Attachment | Wrapper for UF_UI_attachment_s |
NXOpen.Mechatronics.ElectricalPartBuilder.Attribute | Defined Attribute Structure |
NXOpen.UF.UFFam.AttributeData | Wrapper for UF_FAM_attribute_data_s |
NXOpen.NXObject.AttributeInformation | Contains attribute information |
NXOpen.UF.UFPd.AttributeValue | Wrapper for UF_PD_attribute_value_s |
NXOpen.UF.UFPd.AttributeValueData | Wrapper for UF_PD_attribute_value_data_s |
NXOpen.UF.UFPd.AttributeValueData2 | Wrapper for UF_PD_attribute_value_data_2_s |
NXOpen.UF.UFPd.AttributeValueString | Wrapper for UF_PD_attribute_value_string_s |
NXOpen.CAE.CaeGroupCollection.AutoGroupErrorCodes | Contains list of error codes for each auto group type |
NXOpen.CAE.CaeGroupCollection.AutoGroupSeedNames | Contains the prefix seed names to be given to auto created groups by type If a seed value is passed as NULL, then the auto created groups by that type will be given a default prefix List of default prefixes are as follows: MAT- for material_seed PPT- for ppt_seed Color- for color_seed XSECT- for section_seed LAM- for laminate seed DIM- for dimension seed FE_TYPE- for meshcolltype_seed ACROSS- for connected across assembly component seed |
NXOpen.CAE.CaeGroupCollection.AutoGroupTypes | Contains information about the types by which we do auto grouping |
NXOpen.CAE.Result.Averaging | Averaging structure to specify averaging options |
NXOpen.CAE.Post.Axisymmetric | 3D Axi-symmetric model display settings |
NXOpen.UF.UFPlot.BannerOptions | Wrapper for UF_PLOT_banner_options_s |
BaseSession | |
NXOpen.Session | Represents the NX session |
NXOpen.UF.UFSession | Represents the NXOpen.UF session |
NXOpen.UF.UFModl.BendOperationData | Wrapper for UF_MODL_bend_operation_data_s |
NXOpen.UF.UFRoute.BendReportMil98 | Wrapper for UF_ROUTE_bend_report_mil98_s |
NXOpen.UF.UFRoute.BendReportXyz | Wrapper for UF_ROUTE_bend_report_xyz_s |
NXOpen.UF.UFRoute.BendReportYbc | Wrapper for UF_ROUTE_bend_report_ybc_s |
NXOpen.UF.UFModl.BlendEdge | Wrapper for UF_MODL_blend_edge_s |
NXOpen.UF.UFModl.BlendFacesCreateData | Wrapper for UF_MODL_blend_faces_create_data_s |
NXOpen.UF.UFModl.BlendFacesLimitData | Wrapper for UF_MODL_blend_faces_limit_data_s |
NXOpen.UF.UFModl.BlendPoint | Wrapper for UF_MODL_blend_point_s |
NXOpen.UF.UFModl.BlendPointData | Wrapper for UF_MODL_blend_point_data_s |
NXOpen.Features.FillHoleBuilder.BorderContinuity | Represents continuity value at a border curve |
NXOpen.UF.UFCambnd.BoundaryData | Wrapper for UF_CAMBND_boundary_data_s |
NXOpen.Fields.FieldVariable.Bounds | Variable Bounds structure |
NXOpen.UF.UFDraw.BreakoutData | Wrapper for UF_DRAW_breakout_data_s |
NXOpen.UF.UFDraw.BreakRegionBoundary | Wrapper for UF_DRAW_break_region_boundary_s |
NXOpen.UF.UFDraw.BreakRegionData | Wrapper for UF_DRAW_break_region_data_s |
NXOpen.UF.UFCurve.BridgeData | Wrapper for UF_CURVE_bridge_data_s |
NXOpen.UF.UFModl.Bsurface | Wrapper for UF_MODL_bsurface_s |
NXOpen.UF.UFModl.BsurfRowInfo | Wrapper for UF_MODL_bsurf_row_info_s |
NXOpen.UF.UFPd.BusinessModifier | Wrapper for UF_PD_business_modifier_s |
NXOpen.GeometricAnalysis.GeometricProperties.CaeCurve | CAE Edge/Curve Geometric Properties |
NXOpen.GeometricAnalysis.GeometricProperties.CaeFace | CAE Face Geometric Properties |
NXOpen.UF.UFGdt.CalloutString | Wrapper for UF_GDT_callout_string_s |
NXOpen.CAM.CamOperationCircularMotionDataType | Circular motion data type |
NXOpen.CAM.CamOperationFeedContentType | Feed content type |
NXOpen.CAM.CamOperationHelicalMotionDataType | Helical motion data type |
NXOpen.CAM.CamOperationLinearMotionDataType | Linear motion data type |
NXOpen.CAM.CamOperationMotionContactDataType | Motion contact data type |
NXOpen.CAM.CamOperationMotionPostDataType | Motion post data type |
NXOpen.CAM.CamOperationMotionPosType | Motion pos type |
NXOpen.UF.UFLayer.CategoryInfo | Wrapper for UF_LAYER_category_info_s |
NXOpen.UF.UFMb.Cb | Wrapper for UF_MB_cb_s |
NXOpen.UF.UFTabnot.CellPrefs | Wrapper for UF_TABNOT_cell_prefs_s |
NXOpen.UF.UFDrf.CenterlineInfo | Wrapper for UF_DRF_centerline_info_s |
NXOpen.UF.UFDrf.Cfw | Wrapper for UF_DRF_cfw_s |
NXOpen.UF.UFUi.ChainedPoints | Wrapper for UF_UI_chained_points_s |
NXOpen.UF.UFDrf.ChamferDimensionData | Wrapper for UF_DRF_chamfer_dimension_data_s |
NXOpen.Routing.CharacteristicList.CharacteristicInformation | Contains the type and name of a characteristic |
NXOpen.Annotations.CharacterSpaceFactor | Specifies the standard font character space factor for each of the text types |
NXOpen.UF.UFRoute.CharDesc | Wrapper for UF_ROUTE_char_desc_s |
NXOpen.UF.UFClone.CheckinData | Wrapper for UF_CLONE_checkin_data_s |
NXOpen.PDM.PdmPart.CheckinInput | Reservation check-in input struct |
NXOpen.UF.UFClone.CheckoutData | Wrapper for UF_CLONE_checkout_data_s |
NXOpen.PDM.PdmPart.CheckoutInput | Reservation check-out input struct |
NXOpen.UF.UFSmd.ChkStdResults | Wrapper for UF_SMD_chk_std_results_s |
NXOpen.UF.UFPath.CircularMotion | Wrapper for UF_PATH_circular_motion_s |
NXOpen.UF.UFFam.ClassData | Wrapper for UF_FAM_class_data_s |
NXOpen.CAE.Post.Clipping | Cutting-plane display settings |
NXOpen.UF.UFCgm.Color | Wrapper for UF_CGM_color_s |
NXOpen.CAE.Post.Colorbar | Colorbar settings |
NXOpen.ColorDefinitionRgb | Specifies rgb values for color |
NXOpen.Preferences.ViewVisualizationSpecialEffects.ColorHLS | Represents three constituents of a HLS color pattern |
NXOpen.Preferences.ViewVisualizationSpecialEffects.ColorHSV | Represents three constituents of a HSV color pattern |
NXOpen.Preferences.ViewVisualizationSpecialEffects.ColorRGB | Represents three constituents of a RGB color pattern |
NXOpen.UF.UFPlist.ColPrefs | Wrapper for UF_PLIST_col_prefs_s |
NXOpen.Preferences.RoutingPartLibrary.Column | Part table column type |
NXOpen.UF.UFCurve.CombineCurvesDirection | Wrapper for UF_CURVE_combine_curves_direction_s |
NXOpen.UF.UFModl.CompareEntityInfo | Wrapper for UF_MODL_compare_entity_info_s |
NXOpen.UF.UFModl.CompareEntityMatch | Wrapper for UF_MODL_compare_entity_match_s |
NXOpen.UF.UFModl.CompareOptions | Wrapper for UF_MODL_compare_options_s |
NXOpen.UF.UFModl.ComparePartEntitiesData | Wrapper for UF_MODL_compare_part_entities_data_s |
NXOpen.UF.UFModl.ComparePartEntitiesData3 | Wrapper for UF_MODL_compare_part_entities_data_3_s |
NXOpen.UF.UFModl.ComparePartMapData | Wrapper for UF_MODL_compare_part_map_data_s |
NXOpen.UF.UFModl.ComparePartMapData3 | Wrapper for UF_MODL_compare_part_map_data_3_s |
NXOpen.CAE.Complex | A complex number |
NXOpen.UF.UFPart.CompressFlags | Wrapper for UF_PART_compress_flags_s |
NXOpen.NXObject.ComputationalTime | Holds the computational time value of a time attribute |
NXOpen.UF.UFDisp.ConeheadAttrbSTag | Wrapper for UF_DISP_conehead_attrb_s_tag |
NXOpen.UF.UFSket.ConGeom | Wrapper for UF_SKET_con_geom_s |
NXOpen.UF.UFCurve.Conic | Wrapper for UF_CURVE_conic_s |
NXOpen.UF.UFCurve.Constraint | Wrapper for UF_CURVE_constraint_s |
NXOpen.Sketch.ConstraintGeometry | Used by the create geometric constraint methods to indicate what geometry the constraint should be applied to |
NXOpen.Sketch.ConstraintGeometryHelp | Used by several constraint creation methods that need a help point or parameter to indicate how to create the constraint |
NXOpen.UF.UFPath.ContactData | Wrapper for UF_PATH_contact_data_s |
NXOpen.UF.UFSf.ContactMeshData | Wrapper for UF_SF_contact_mesh_data_s |
NXOpen.UF.UFMotion.ContactParameters | Wrapper for UF_MOTION_contact_parameters_s |
NXOpen.Sketch.CopyObjectData | This structure represents a map between the original object to be copied and the corresponding copied object |
NXOpen.UF.UFObj.CreSettings | Wrapper for UF_OBJ_cre_settings_s |
NXOpen.UF.CurveBcmmcp | Wrapper for UF_CURVE_BCMMCP_s |
NXOpen.UF.UFMotion.CurveCurveConstraint | Wrapper for UF_MOTION_curve_curve_constraint_s |
NXOpen.Motion.GraphBuilder.CurveData | Contains the structure of curve associated with curve data |
NXOpen.UF.UFModl.CurveFitData | Wrapper for UF_MODL_curve_fit_data_s |
NXOpen.UF.UFCgm.CustomColors | Wrapper for UF_CGM_custom_colors_s |
NXOpen.UF.UFCamgeom.CustomPoint | Wrapper for UF_CAMGEOM_custom_point_s |
NXOpen.UF.UFDrf.CustomSymbol | Wrapper for UF_DRF_custom_symbol_s |
NXOpen.UF.UFDrf.CustomSymbolText | Wrapper for UF_DRF_custom_symbol_text_s |
NXOpen.UF.UFCgm.CustomWidths | Wrapper for UF_CGM_custom_widths_s |
NXOpen.UF.UFPath.Cutcom | Wrapper for UF_PATH_cutcom_s |
NXOpen.UF.CutLevelSingle | Wrapper for UF_CUT_LEVEL_single_s |
NXOpen.UF.UFCutLevels.CutLevelsStruct | Wrapper for UF_CUT_LEVELS_s |
NXOpen.UF.UFMotion.CylindricalBushing | Wrapper for UF_MOTION_cylindrical_bushing_s |
NXOpen.UF.UFGdt.DataFrame | Wrapper for UF_GDT_data_frame_s |
NXOpen.UF.UFModlTrex.DataSet | Wrapper for UF_MODL_TREX_data_set_s |
NXOpen.UF.UFSubdiv.DataStructuresUnion | Wrapper for UF_SUBDIV_data_structures_union |
NXOpen.UF.UFGdt.DatumIdentifier | Wrapper for UF_GDT_datum_identifier_s |
NXOpen.UF.UFGdt.DatumReference | Wrapper for UF_GDT_datum_reference_s |
NXOpen.UF.UFGdt.DatumTargetLine | Wrapper for UF_GDT_datum_target_line_s |
NXOpen.UF.UFGdt.DatumTargetPoint | Wrapper for UF_GDT_datum_target_point_s |
NXOpen.RuleManager.DebugInstance | Used to return debug update information for instances |
NXOpen.RuleManager.DebugRule | Used to return debug update information for rules |
NXOpen.UF.UFSf.DefeatureParms | Wrapper for UF_SF_defeature_parms_s |
NXOpen.UF.UFDraw.DefineBoundary | Wrapper for UF_DRAW_define_boundary_s |
NXOpen.CAE.Result.DeformationParameters | Deformation parameter structure to specify complete result state for the deformed shape This structure has been replaced by NXOpen.CAE.DeformationParameters |
NXOpen.UF.UFAssem.DeformData | Wrapper for UF_ASSEM_deform_data_s |
NXOpen.UF.UFAssem.DeformedDefinitionData | Wrapper for UF_ASSEM_deformed_definition_data_s |
NXOpen.UF.UFAssem.DeformPartData | Wrapper for UF_ASSEM_deform_part_data_s |
NXOpen.UF.UFAssem.DeformPartWarnings | Wrapper for UF_ASSEM_deform_part_warnings_s |
NXOpen.Assemblies.DegreesOfFreedom | Structure used to report the Degrees of Freedom of a component |
NXOpen.PartDelayedUpdateStatus.DelayStatusInfo | Logical structure of part delayed update status |
NXOpen.UF.UFGdt.DepthTolerance | Wrapper for UF_GDT_depth_tolerance_s |
NXOpen.UF.UFGdt.Description | Wrapper for UF_GDT_description_s |
NXOpen.Optimization.DesignStudyBuilder.DesignStudyObjective | Defined Objective Structure |
NXOpen.Optimization.DesignStudyBuilder.DesignStudyVariable | Defined variable structure |
NXOpen.UF.UFModl.DevchkEeInfo | Wrapper for UF_MODL_devchk_ee_info_s |
NXOpen.UF.UFModl.DeviationCheckData | Wrapper for UF_MODL_deviation_check_data_s |
NXOpen.UF.UFModl.DfoConstraint | Wrapper for UF_MODL_dfo_constraint_s |
NXOpen.UF.UFModl.DfoRegion | Wrapper for UF_MODL_dfo_region_s |
NXOpen.UF.UFDrf.DiameterRadiusPreferences | Wrapper for UF_DRF_diameter_radius_preferences_s |
NXOpen.UF.UFModl.DieTipInfo | Wrapper for UF_MODL_die_tip_info_s |
NXOpen.UF.UFModl.DimensionData | Wrapper for UF_MODL_dimension_data_s |
NXOpen.Sketch.DimensionGeometry | Used in the dimension creation methods to indicate what geometry to create the dimension on |
NXOpen.UF.UFDrf.DimensionPreferences | Wrapper for UF_DRF_dimension_preferences_s |
NXOpen.UF.UFDrf.DimensionPreferences1 | Wrapper for UF_DRF_dimension_preferences1_s |
NXOpen.UF.UFCgm.Dimensions | Wrapper for UF_CGM_dimensions_s |
NXOpen.UF.UFDrf.DimInfo | Wrapper for UF_DRF_dim_info_s |
NXOpen.UF.UFDrf.DimLineInfo | Wrapper for UF_DRF_dim_line_info_s |
NXOpen.UF.UFSket.DimObject | Wrapper for UF_SKET_dim_object_s |
NXOpen.UF.UFGdt.DirectedDimension | Wrapper for UF_GDT_directed_dimension_s |
NXOpen.UF.UFGdt.DirectedDimension1 | Wrapper for UF_GDT_directed_dimension1_s |
NXOpen.UF.UFCurve.DirectionStructU | Wrapper for UF_CURVE_direction_struct_u |
NXOpen.UF.UFSo.DirrOnSurfData | Wrapper for UF_SO_dirr_on_surf_data_s |
NXOpen.Preferences.ViewVisualizationVisual.DisplayAppearanceOptions | Describes the rendering style and the appearance of edges and silhouettes in the view |
NXOpen.CAE.ModelCheck.DuplicateElementsCheckBuilder.DisplaySettings | Represents the display settings of duplicated elements detected |
NXOpen.CAE.ModelCheck.DuplicateNodesCheckBuilder.DisplaySettings | Represents the display settings data |
NXOpen.UF.UFParam.DispPath | Wrapper for UF_PARAM_disp_path_s |
NXOpen.UF.UFObj.DispProps | Wrapper for UF_OBJ_disp_props_s |
NXOpen.UF.UFParam.DispTool | Wrapper for UF_PARAM_disp_tool_s |
NXOpen.CAE.Optimization.TBSCheckDOF.DofSettings | the displacement restriction settings on three axial directions of referenced coordinate system |
NXOpen.CAE.DofTerm | Used to specify a term of the Degree of freedom |
NXOpen.UF.UFDrf.DoglegInfo | Wrapper for UF_DRF_dogleg_info_s |
NXOpen.Annotations.OrdinateDimension.DoglegPreferences | Specifies the ordinate dogleg preferences |
NXOpen.CAM.DoubleIntentData | The data for CamUI_DoubleIntentComp |
NXOpen.CAM.DoubleStatusData | The data for CamUI_DoubleStatusComp |
NXOpen.UF.UFDrf.DraftAidLine | Wrapper for UF_DRF_draft_aid_line_s |
NXOpen.UF.UFDrf.DraftAidText | Wrapper for UF_DRF_draft_aid_text_s |
NXOpen.UF.UFDrf.DraftAidTextInfo | Wrapper for UF_DRF_draft_aid_text_info_s |
NXOpen.UF.UFDisp.DrawingDisplayData | Wrapper for UF_DISP_drawing_display_data_s |
NXOpen.UF.UFGdt.DrfData | Wrapper for UF_GDT_drf_data_s |
NXOpen.UF.UFGdt.DrfReference | Wrapper for UF_GDT_drf_reference_s |
NXOpen.GeometricAnalysis.GeometricProperties.Edge | Edge/Curve Geometric Properties |
NXOpen.UF.UFModl.EdgeBlendData | Wrapper for UF_MODL_edge_blend_data_s |
NXOpen.UF.UFModl.EdgeBlendMultData | Wrapper for UF_MODL_edge_blend_mult_data_s |
NXOpen.UF.UFModl.EdgeBlendSet | Wrapper for UF_MODL_edge_blend_set_s |
NXOpen.UF.UFModl.EdgeBlendSetbackData | Wrapper for UF_MODL_edge_blend_setback_data_s |
NXOpen.UF.UFModl.EdgeBlendStopshortData | Wrapper for UF_MODL_edge_blend_stopshort_data_s |
NXOpen.UF.UFSf.EdgeDensityData | Wrapper for UF_SF_edge_density_data_s |
NXOpen.UF.UFView.EdgeDisplayOptions | Wrapper for UF_VIEW_edge_display_options_s |
NXOpen.CAE.ModelCheck.ElementEdgeCheckBuilder.EdgeDisplayStyle | the display style of the edges detected |
NXOpen.CAE.Post.EdgeFace | Edge and Face display settings |
NXOpen.UF.UFSf.EfConnInfo | Wrapper for UF_SF_ef_conn_info_s |
NXOpen.CAE.ElemEdgefaceObject | Structure used to retrieve list of Element Edges or Element Faces in a group |
NXOpen.Mechatronics.CamProfileBuilder.Element | Contains segment information of a motion segment |
NXOpen.CAE.ModelCheck.TestValueTypes.ElementReference | represents an element reference definition associated with this test |
NXOpen.CAE.Result.ElementValue | Element-value structure to specify element value options |
NXOpen.UF.UFEval.Ellipse | Wrapper for UF_EVAL_ellipse_s |
NXOpen.CAE.QueryCurvePost.Entity | Query curve post entity |
NXOpen.Motion.PostProcess.EnvelopeTolerance | Contains settings for envelope tolerance |
NXOpen.UF.EplibCharx | Wrapper for UF_EPLIB_charx_s |
NXOpen.UF.EplibCharxValueU | Wrapper for UF_EPLIB_charx_value_u |
NXOpen.UF.EplibPartLibPart | Wrapper for UF_EPLIB_part_lib_part_s |
NXOpen.UF.UFUi.ErrData | Wrapper for UF_UI_err_data_s |
NXOpen.CAM.CAMObject.ErrorItem | Error Item |
NXOpen.UF.UFWeight.Exceptions | Wrapper for UF_WEIGHT_exceptions_s |
NXOpen.UF.UFClone.ExLogOpts | Wrapper for UF_CLONE_ex_log_opts_s |
NXOpen.UF.UFCgm.ExportOptions | Wrapper for UF_CGM_export_options_s |
NXOpen.UF.UFPart.ExportOptions | Wrapper for UF_PART_export_options_s |
NXOpen.UF.UFPlot.Extents | Wrapper for UF_PLOT_extents_s |
NXOpen.GeometricAnalysis.GeometricProperties.Face | Face Geometric Properties |
NXOpen.UF.UFDisp.FaceFacetData | Wrapper for UF_DISP_face_facet_data_s |
NXOpen.UF.UFModl.Faces | Wrapper for UF_MODL_faces_s |
NXOpen.UF.UFDisp.Facet | Wrapper for UF_DISP_facet_s |
NXOpen.Facet.FacetingParameters | The structure of JA faceting parameters |
NXOpen.NXColor.Factory | <exclude> |
NXOpen.UF.UFFam.FamilyData | Wrapper for UF_FAM_family_data_s |
NXOpen.UF.UFGdt.Fcf | Wrapper for UF_GDT_fcf_s |
NXOpen.Weld.WeldObjectBuilder.FeatureInfo | Structure used to identify if each feature is newly created or edited |
NXOpen.Weld.WeldPointExitBuilder.FeatureInfo | Structure used to identify newly created features |
NXOpen.UF.UFGdt.FeatureParms | Wrapper for UF_GDT_feature_parms_s |
NXOpen.UF.UFModl.Features | Wrapper for UF_MODL_features_s |
NXOpen.Part.FeatureUpdateStatus | Contains feature update status report |
NXOpen.UF.UFParam.Feedrate | Wrapper for UF_PARAM_feedrate_s |
NXOpen.CAM.FeedStatusData | The data for CamUI_FeedStatusComp |
NXOpen.UF.UFPlist.FieldFormat | Wrapper for UF_PLIST_field_format_s |
NXOpen.Weld.JointExitBuilder.FilletSizes | The structure for defining fillet weld lengths |
NXOpen.UF.UFCurve.FitError | Wrapper for UF_CURVE_fit_error_s |
NXOpen.UF.UFModl.FlangeData | Wrapper for UF_MODL_flange_data_s |
NXOpen.Preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay | The members of the following structure are the display data for a callout in a flat pattern drawing member view |
NXOpen.Preferences.PartSheetmetal.FlatPatternCalloutTypeDisplay | The members of the following structure are the display data for a callout in a flat pattern drawing member view |
NXOpen.SheetMetal.FlatPatternSettings.FlatPatternCalloutTypeDisplay | The members of the following structure are the display data for a callout in a flat pattern drawing member view |
NXOpen.Preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay | The members of the following structure are the display data for an object in a flat pattern drawing member view |
NXOpen.Preferences.PartSheetmetal.FlatPatternObjectTypeDisplay | The members of the following structure are the display data for an object in a flat pattern drawing member view |
NXOpen.SheetMetal.FlatPatternSettings.FlatPatternObjectTypeDisplay | The members of the following structure are the display data for an object in a flat pattern drawing member view |
NXOpen.UF.UFPath.Flush | Wrapper for UF_PATH_flush_s |
NXOpen.Preferences.ViewVisualizationSpecialEffects.FogData | Represents the constituents of fog data |
NXOpen.UF.UFView.FogOptions | Wrapper for UF_VIEW_fog_options_s |
NXOpen.UF.UFDrf.FoldedRadiusInfo | Wrapper for UF_DRF_folded_radius_info_s |
NXOpen.UF.UFUgfont.FontHeader | Wrapper for UF_UGFONT_font_header_s |
NXOpen.UF.UFSmd.FormOutput | Wrapper for UF_SMD_form_output_s |
NXOpen.UF.UFSmd.FpPrefs | Wrapper for UF_SMD_fp_prefs_s |
NXOpen.UF.UFMotion.Function | Wrapper for UF_MOTION_function_s |
NXOpen.RuleManager.FunctionArgumentsInformation | Used to return information about the arguments for a function |
NXOpen.RuleManager.FunctionInformation | Used to return information about a function |
NXOpen.UF.UFDrf.GdtLeader | Wrapper for UF_DRF_gdt_leader_s |
NXOpen.UF.UFDrf.GdtLeaderData | Wrapper for UF_DRF_gdt_leader_data_s |
NXOpen.UF.UFDrf.GdtSymbolInfo | Wrapper for UF_DRF_gdt_symbol_info_s |
NXOpen.UF.UFCurve.Genconic | Wrapper for UF_CURVE_genconic_s |
NXOpen.UF.UFMotion.GeneralBushing | Wrapper for UF_MOTION_general_bushing_s |
NXOpen.UF.UFSmd.GenPrefs | Wrapper for UF_SMD_gen_prefs_s |
NXOpen.UF.UFGdt.GeometricDefinition | Wrapper for UF_GDT_geometric_definition_s |
NXOpen.Motion.PackagingMeasureBuilder.GeometryData | Represents geometry data |
NXOpen.UF.UFSf.GeomOptions | Wrapper for UF_SF_geom_options_s |
NXOpen.CAE.Post.GraphIds | Graph handle |
NXOpen.CAE.Post.GraphParameters | Graph extraction parameters |
NXOpen.UF.UFDisp.Grid | Wrapper for UF_DISP_grid_s |
NXOpen.Preferences.WorkPlane.GridSize | Grid size parameters |
NXOpen.UF.UFCambnd.GroupData | Wrapper for UF_CAMBND_group_data_s |
NXOpen.UF.UFDraw.HalfSxsegs | Wrapper for UF_DRAW_half_sxsegs_s |
NXOpen.UF.UFDrf.HatchFillPreferences | Wrapper for UF_DRF_hatch_fill_preferences_s |
NXOpen.CAE.Post.Headerlines | Headerlines |
NXOpen.UF.UFPath.HelicalMotion | Wrapper for UF_PATH_helical_motion_s |
NXOpen.UF.UFCurve.HelpData | Wrapper for UF_CURVE_help_data_s |
NXOpen.BasePart.HistoryEventInformation | Contains part history event information |
NXOpen.UF.UFCutter.HolderSection | Wrapper for UF_CUTTER_holder_section_s |
NXOpen.UF.UFEval.Hyperbola | Wrapper for UF_EVAL_hyperbola_s |
NXOpen.CAE.Xyplot.I2DDataPlot | Represents a plot interface which input should be a series of 2D data |
NXOpen.CAE.Xyplot.BarChartPlot | Manages the display of bar chart plot |
NXOpen.CAE.Xyplot.ColorBarPlot | Manages the display of color bar plot |
NXOpen.CAE.Xyplot.Plot2D | Manages the display of 2D plot |
NXOpen.CAE.Xyplot.StackedPlot | Manages the display of stacked plot |
NXOpen.CAE.Xyplot.I3DDataGraph | Represents a graph interface which input is 3D data |
NXOpen.CAE.Xyplot.ColorMapGraph | Manages the display color map graph |
NXOpen.CAE.Xyplot.Graph3D | Manages the display graph 3d |
NXOpen.CAE.Xyplot.I3DDataPlot | Represents a plot interface which input is 3D data |
NXOpen.CAE.Xyplot.ColorMapPlot | Manages the display of color map plot |
NXOpen.CAE.Xyplot.Plot3D | Manages the display of 3D plot |
NXOpen.CAE.IAncillaryDisplayableEntity | Represents an ANCILLARY_DISPLAYABLE_ENTITY |
NXOpen.CAE.SimSimulationObject | Represents a simulation object |
NXOpen.CAE.FTK.IApplicationData | Represents the interface for application specific data class |
NXOpen.CAE.SignalProcessingPlotData | Exposes the ability to change the Spectrum scaling, correction mode and acoustical weighting applied on a curve displayed in a XY plot |
NXOpen.Motion.GraphLegendData | Represents a motion graph legend data |
NXOpen.CAE.FTK.IApplicationDataOwner | Represents the interface for application specific data owner |
NXOpen.CAE.FTK.ArrayRecord2D | Manages the 2d array record |
NXOpen.CAE.FTK.ArrayRecord2DEven | Manages the 2d array record with even abscissa data |
NXOpen.CAE.FTK.ArrayRecord3D | Manages the 3d array record |
NXOpen.CAE.FTK.SectionBasedMatrixRecord | Represents a kind of record data could be displayed by 3D graphing |
NXOpen.CAE.FTK.ComplexSectionBasedMatrixRecord | Represents a section based matrix record which has complex data values |
NXOpen.CAE.FTK.RealSectionBasedMatrixRecord | Represents a section based matrix record which has real data values |
NXOpen.PDM.IAttributeGroupOwner | An interface class for objects that own attribute groups |
NXOpen.PDM.AttributeGroup | Represents an attribute group |
NXOpen.PDM.ModelElement | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PDM.ConditionalElementRevision | Represents a base class that provides common methods for various conditional model elements in a NXOpen.CollaborativeDesign |
NXOpen.PDM.ConnectionElementRevision | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PID.Pipe | Represents the Pipe class |
NXOpen.PDM.ElementGroup | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PLAS.Run | Represents the Run class |
NXOpen.PDM.LogicalElementRevision | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PID.Equipment | Represents the equipment class |
NXOpen.PID.PortEquipment | Represents the PortEquipment class |
NXOpen.PDM.SheetRevision | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PID.Sheet | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PDM.CrossSheetReference | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PID.OffSheetConnector | Represents the off sheet connector class |
NXOpen.PDM.ModelElementRevision | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PDM.DesignElementRevision | Represents the design element revision in the database |
NXOpen.PDM.DesignFeatureRevision | Represents the design feature revision in the database |
NXOpen.PDM.DesignSubordinateRevision | Represents the design subordinate revision in the database |
NXOpen.IAttributeSourceObjectBuilder | Represents an interface to perform various database operations on an array of NXOpen.NXObject |
NXOpen.Assemblies.AddComponentBuilder | Represents a builder class that performs add existing component operation in current context |
NXOpen.Assemblies.CopyDesignElementBuilder | Represents a builder class that performs copying design element operation in 4GD |
NXOpen.Assemblies.DesignElementBuilder | Represents a builder class that performs various design element operations |
NXOpen.Assemblies.SubsetBuilder | A SubsetBuilder is used to create or edit an NXOpen.Assemblies.Subset |
NXOpen.Features.ShipDesign.CopyPasteNewBuilder | Represents a NXOpen.Features.ShipDesign.CopyPasteNewBuilder It is used in Ship Building Application |
NXOpen.Gateway.IGenericFileNewApplicationBuilder | Represents the class Application Builder |
NXOpen.PID.FileNewApplicationBuilder | Represents a builder class that performs Generic File New operations |
NXOpen.Motion.AddSubmechanismBuilder | Represents a builder class that performs add submechanism in current context |
NXOpen.PDM.ExportWorksetForReferenceBuilder | Represents a builder class that performs Create operations |
NXOpen.PDM.ObjectCreateBuilder | Represents a builder class that perofrms create operation |
NXOpen.PDM.PartOperationBuilder | Represents a builder class that performs various design element operations |
NXOpen.PDM.PartOperationCopyBuilder | Represents a builder class that performs various Save As operations |
NXOpen.PDM.PartOperationMakeUniqueBuilder | Represents a NXOpen.PDM.PartOperationMakeUniqueBuilder builder |
NXOpen.PDM.PartOperationCreateBuilder | Represents a builder class that performs Create operations |
NXOpen.PDM.PartOperationImportBuilder | Represents a builder class that performs Create operations |
NXOpen.PDM.SmartSaveBuilder | TODO: Add a documentation comment describing this class |
NXOpen.PLAS.RunBuilder | Represents a RunBuilder |
NXOpen.Preferences.IBaseViewPreferences | Represents set of IBaseViewPreferences applicable to drafting views |
NXOpen.Drawings.BaseViewStyle | Represents set of Base View Style Preferences applicable to drafting views |
NXOpen.Preferences.BaseViewPreferences | Represents set of Base View Preferences applicable to drafting views |
NXOpen.Features.IBoolean | Base class for Unite, Intersect and Subtract features |
NXOpen.Features.Intersect | Represents a Intersect feature |
NXOpen.Features.BooleanFeature | Represents a boolean feature |
NXOpen.Features.Subtract | Represents a Subtract feature |
NXOpen.Features.BooleanFeature | Represents a boolean feature |
NXOpen.Features.Unite | Represents a Unite feature |
NXOpen.Features.BooleanFeature | Represents a boolean feature |
NXOpen.GeometricUtilities.IComponentBuilder | Represents a component contained in a builder |
NXOpen.AME.BasicPropertiesBuilder | Represents a re-usable component for basic properties such as name and description |
NXOpen.AME.ConditionsBuilder | JA class for the conditions dialog |
NXOpen.AME.EngineeringObjectAspectDetailBuilder | JA class for the Engineering Object Aspect Detail UI block |
NXOpen.AME.EngineeringObjectNameBuilder | JA class for the Engineering Object and Engineering Object def name and description superclass UI block |
NXOpen.AME.InsertSettingsBuilder | Re-usable UI for Settings properties in Insert EO and Insert Template dialog |
NXOpen.AME.ObjectConnectionBuilder | JA class for the reuse object connection block |
NXOpen.AME.ObjectConnectionDetailBuilder | JA class for the reuse object connection detail block |
NXOpen.AME.ObjectNameBuilder | Object Name JA class |
NXOpen.AME.ObjectNameIndexBuilder | Object Name Index JA class |
NXOpen.AME.ReferenceObjectBuilder | Re-usable UI consist of a context and source selection |
NXOpen.AME.SelectAMEBaseNode | Represents a single object selection |
NXOpen.AME.SelectAMEBaseNodeList | Represents a list of objects on a selection list |
NXOpen.AME.SelectAMEExtendedObject | Represents a single object selection |
NXOpen.AME.SelectAMEPort | Represents a single object selection |
NXOpen.AME.SelectAspectNode | Represents a single object selection |
NXOpen.Annotations.AppendedTextBuilder | This class is used to set/access the appended text of a dimension |
NXOpen.Annotations.ArbitraryAreaSeedBuilder | Represents a NXOpen.Annotations.ArbitraryAreaSeedBuilder |
NXOpen.Annotations.AssociatedObjectsBuilder | The associated objects builder is used to store objects which annotations are associated to |
NXOpen.Annotations.AssociatedObjectsSetsBuilder | The associated objects sets builder is used to store lists of objects which annotations are associated to |
NXOpen.Annotations.BendTableSettingsBuilder | Represents a NXOpen.Annotations.BendTableSettingsBuilder |
NXOpen.Annotations.BillOfMaterialBuilder | Builder for Bill of Material functionality used in Routing |
NXOpen.Annotations.BoundaryBuilder | This builder contains the boundaries that define a crosshatch pattern |
NXOpen.Annotations.BreakSettingsBuilder | Represents a NXOpen.Annotations.BreakSettingsBuilder builder |
NXOpen.Annotations.CenterlineSettingsBuilder | Represents a Builder for Centerline Settings |
NXOpen.Annotations.Centerline2dSettingsBuilder | Represents a Builder for Centerline2dSettings |
NXOpen.Annotations.Centerline3dSettingsBuilder | Represents a Builder for Centerline3dSettings |
NXOpen.Annotations.CenterMarkSettingsBuilder | Represents a Builder for CenterMark Settings |
NXOpen.Annotations.CircleCenterlineSettingsBuilder | Represents a Builder for Circle Centerline Settings |
NXOpen.Annotations.SymmetricalCenterlineSettingsBuilder | Represents a Builder for Symmetrical Centerline Settings |
NXOpen.Annotations.CommonWorkflowBuilder | Represents a NXOpen.Annotations.CommonWorkflowBuilder |
NXOpen.Annotations.CompoundDatumReferenceBuilder | Represents a NXOpen.Annotations.CompoundDatumReferenceBuilder |
NXOpen.Annotations.CutSheetBuilder | Builder for Formboard cut sheet functionality used in formboard |
NXOpen.Annotations.CuttingPlaneSymbolBuilder | Represents a NXOpen.Annotations.CuttingPlaneSymbolBuilder |
NXOpen.Annotations.DatumReferenceBuilder | Represents a NXOpen.Annotations.DatumReferenceBuilder |
NXOpen.Annotations.DimensionMeasurementBuilder | Represents a NXOpen.Annotations.DimensionMeasurementBuilder |
NXOpen.Annotations.DimensionSetBuilder | Represents a NXOpen.Annotations.DimensionSetBuilder |
NXOpen.Annotations.DimensionStyleBuilder | Represents a NXOpen.Annotations.DimensionStyleBuilder |
NXOpen.Annotations.DimensionWorkflowBuilder | Represents a Annotations WorkFlowBuilder |
NXOpen.Annotations.DisplayStyleBuilder | Represents a NXOpen.Annotations.DisplayStyleBuilder |
NXOpen.Annotations.DrawingFormatTitleBuilder | Represents a NXOpen.Annotations.DrawingFormatTitleBuilder |
NXOpen.Annotations.DrivingValueBuilder | |
NXOpen.Annotations.FeatureControlFrameDataBuilder | Represents a FeatureControlFrameDataBuilder |
NXOpen.Annotations.FeatureControlFrameIndicatorBuilder | Represents a FcfIndicatorBuilder |
NXOpen.Annotations.ForeshorteningSymbolBuilder | Represents a NXOpen.Annotations.ForeshorteningSymbolBuilder builder |
NXOpen.Annotations.ForeshorteningSymbolSettingsBuilder | Represents a NXOpen.Annotations.ForeshorteningSymbolSettingsBuilder builder |
NXOpen.Annotations.FrameBarElementStyleBuilder | Represents a NXOpen.Annotations.FrameBarElementStyleBuilder |
NXOpen.Annotations.FrameBarStyleBuilder | Represents a NXOpen.Annotations.FrameBarStyleBuilder |
NXOpen.Annotations.HatchFillSettingsBuilder | This class is used to construct the Crosshatch and area Fill setting block |
NXOpen.Annotations.HatchStyleBuilder | Represents a NXOpen.Annotations.HatchStyleBuilder |
NXOpen.Annotations.HoleCalloutSettingsBuilder | Represents a NXOpen.Annotations.HoleCalloutSettingsBuilder , this builder contains list(s) of parameter(s) for feature(s) |
NXOpen.Annotations.HoleTableSettingsContentBuilder | Represents a NXOpen.Annotations.HoleTableSettingsContentBuilder |
NXOpen.Annotations.HoleTableSettingsFormatBuilder | Represents a NXOpen.Annotations.HoleTableSettingsFormatBuilder |
NXOpen.Annotations.HoleTableSettingsHoleFiltersBuilder | Represents a NXOpen.Annotations.HoleTableSettingsHoleFiltersBuilder |
NXOpen.Annotations.HoleTableSettingsLabelBuilder | Represents a NXOpen.Annotations.HoleTableSettingsLabelBuilder |
NXOpen.Annotations.LeaderBuilder | Represents a NXOpen.Annotations.LeaderBuilder |
NXOpen.Annotations.LeaderData | Represents a NXOpen.Annotations.LeaderData |
NXOpen.Annotations.LetteringStyleBuilder | Represents a NXOpen.Annotations.LetteringStyleBuilder |
NXOpen.Annotations.LineArrowStyleBuilder | Represents a NXOpen.Annotations.LineArrowStyleBuilder |
NXOpen.Annotations.LineWeldDataBuilder | Represents a NXOpen.Annotations.LineWeldDataBuilder |
NXOpen.Annotations.MasterSymbolListItemBuilder | Represents a NXOpen.Annotations.MasterSymbolListItemBuilder |
NXOpen.Annotations.OrdinateBaselineBuilder | Represents a builder for an ordinate baseline |
NXOpen.Annotations.OrdinateStyleBuilder | Represents a NXOpen.Annotations.OrdinateStyleBuilder |
NXOpen.Annotations.OriginBuilder | Represents a NXOpen.Annotations.OriginBuilder |
NXOpen.Annotations.PartsListBuilder | Represents a NXOpen.Annotations.PartsListBuilder |
NXOpen.Annotations.PinListBuilder | Builder for Formboard pin list functionality used in formboard |
NXOpen.Annotations.PlaneBuilder | Represents a NXOpen.Annotations.PlaneBuilder object |
NXOpen.Annotations.RadialStyleBuilder | Represents a NXOpen.Annotations.RadialStyleBuilder |
NXOpen.Annotations.RetainedAnnotationsBuilder | Represents a NXOpen.Annotations.RetainedAnnotationsBuilder |
NXOpen.Annotations.SearchCriteriaCalloutBuilder | Represents SearchCriteriaCalloutBuilder |
NXOpen.Annotations.SelectAnnotation | Represents a single object selection |
NXOpen.Annotations.SelectAnnotationList | Represents a list of objects on a selection list |
NXOpen.Annotations.SelectBaseCustomSymbolList | Represents a list of objects on a selection list |
NXOpen.Annotations.SelectDimension | Represents a single object selection |
NXOpen.Annotations.SelectOrdinateDimensionList | Represents a list of objects on a selection list |
NXOpen.Annotations.SelectTableSectionList | Represents a list of objects on a selection list |
NXOpen.Annotations.ShipDraftingFramebarGeneralBuilder | Represents a NXOpen.Annotations.ShipDraftingFramebarGeneralBuilder |
NXOpen.Annotations.SingleSidedDisplayBuilder | Represents a NXOpen.Annotations.SingleSidedDisplayBuilder |
NXOpen.Annotations.StyleBuilder | Represents a NXOpen.Annotations.StyleBuilder |
NXOpen.Annotations.TableStyleBuilder | Represents a NXOpen.Annotations.TableStyleBuilder |
NXOpen.Annotations.SymbolStyleBuilder | Represents a NXOpen.Annotations.SymbolStyleBuilder |
NXOpen.Annotations.SymbolWorkflowBuilder | Represents a NXOpen.Annotations.SymbolWorkflowBuilder |
NXOpen.Annotations.TableCellStyleBuilder | Represents a NXOpen.Annotations.TableCellStyleBuilder |
NXOpen.Annotations.TableColumnBuilder | Represents a NXOpen.Annotations.TableColumnBuilder |
NXOpen.Annotations.TableSectionStyleBuilder | Represents a NXOpen.Annotations.TableSectionStyleBuilder |
NXOpen.Annotations.TabularNoteStyleBuilder | Represents a NXOpen.Annotations.TabularNoteStyleBuilder |
NXOpen.Annotations.HoleTableSettingsWorkflowBuilder | Represents a NXOpen.Annotations.HoleTableSettingsWorkflowBuilder |
NXOpen.Annotations.TextWithEditControlsBuilder | Represents a NXOpen.Annotations.TextWithEditControlsBuilder which collects internationalized text strings from the user for processing on an annotation object |
NXOpen.Annotations.TextWithSymbolsBuilder | Represents a NXOpen.Annotations.TextWithSymbolsBuilder which collects internationalized text strings from the user for processing on an annotation object |
NXOpen.Annotations.TitleBlockCellBuilder | Represents a NXOpen.Annotations.TitleBlockCellBuilder |
NXOpen.Annotations.UnitsStyleBuilder | Represents a NXOpen.Annotations.UnitsStyleBuilder |
NXOpen.Assemblies.ArrangementsBuilder | Represents an arrangements builder that selects an arrangement |
NXOpen.Assemblies.SelectComponent | Represents a single object selection |
NXOpen.Assemblies.SelectComponentList | Represents a list of objects on a selection list |
NXOpen.Assemblies.SubsetConfigurationBuilder | A SubsetConfigurationBuilder is used to edit the revision rule and effectivity used to configure the contents of the subset |
NXOpen.BasicEffectivityBuilder | Represent an interface class for basic effectivity block to assign or edit discrete effectivity unit values |
NXOpen.Builder | A Builder is an object that is used to create and edit other objects |
NXOpen.AcisExporter | Represents a AcisExporter to be used when importing the Acis Data This class is created using DexManager |
NXOpen.AcisImporter | Represents a AcisImporter to be used when importing the Acis Data This class is created using DexManager |
NXOpen.AME.AMEBaseBuilder | JA class for the insert Eng object dialog |
NXOpen.AME.AssignTypeBuilder | Builder for selecting an engineering object definition |
NXOpen.AME.Manage2dSymbolsBuilder | Represents a Manage2dSymbolsBuilder class Builder |
NXOpen.AME.ManageEclassMappingBuilder | Represents a ManageEclassMappingBuilder class Builder |
NXOpen.AME.MultipleObjectsBuilder | JA class for the insert Eng object dialog |
NXOpen.AME.BulkEngineeringObjectBuilder | BulkEngineeringObjectBuilder class will be used for bulk Engineering Object Operation |
NXOpen.AME.EngineeringObjectBaseBuilder | JA class for the insert Eng object dialog |
NXOpen.AME.EngineeringObjectBuilder | JA class for the insert Eng object dialog |
NXOpen.AME.PageBuilder | Represents a Page creation class Builder |
NXOpen.AME.ProjectEngineeringObjectBuilder | JA class for the insert Project Eng object dialog |
NXOpen.AME.InstantiateTemplateBulkBuilder | JA class for the insert Eng object dialog |
NXOpen.AME.Snap3DModelsBuilder | Represents a Snap3DModelsBuilder class Builder |
NXOpen.AME.TeeJunctionBuilder | JA class for creating Tee Junction |
NXOpen.AME.AspectDetailsBuilder | JA Class for the Aspect Details UI Block |
NXOpen.AME.AspectNavigatorPreferencesBuilder | JA class for aspect navigator builder |
NXOpen.AME.AspectPrefixBuilder | represents the builder class which is used to define Aspect Prefixes and Delimiter for NXOpen.AME.Project |
NXOpen.AME.AssignAspectBuilder | Reassign a single aspect of an Engineering Object |
NXOpen.AME.AssignSubnetBuilder | Reassign a single aspect of an Engineering Object |
NXOpen.AME.AssignTemplateToProductBuilder | Builder class to assign a template object to NXOpen.AME.ProductDefinition |
NXOpen.AME.BaseEvaluatorBuilder | Represents the builder for all the evaluators |
NXOpen.AME.AccessorEvaluatorBuilder | Evaluates an object based on a property value or an index |
NXOpen.AME.AncestorEvaluatorBuilder | Evaluates an ancestor for a given aspect and a starting point |
NXOpen.AME.ChildrenEvaluatorBuilder | Evaluates the children objects for a given aspect and a starting point |
NXOpen.AME.ConnectedObjectsEvaluatorBuilder | Evaluates the connected objects for the given port and a starting point |
NXOpen.AME.ObjectEvaluatorBuilder | Evaluates the object given a starting point |
NXOpen.AME.ParentEvaluatorBuilder | Evaluates the parent object for a given aspect and a starting point |
NXOpen.AME.PlcSymbolsEvaluatorBuilder | Evaluates the PLC tags for a given aspect and a starting point |
NXOpen.AME.PortEvaluatorBuilder | Evaluates the port objects for the given port and a starting point |
NXOpen.AME.PropertyEvaluatorBuilder | Evaluates the property of an object given a category and property |
NXOpen.AME.BreakTemplateBuilder | JA class for the insert Eng object dialog |
NXOpen.AME.BulkConnectionBuilder | builder for the bulk connection dialog |
NXOpen.AME.CabinetDesignBuilder | the builder for creating cabinet design |
NXOpen.AME.CallMethodRuleBuilder | JA class for the call method rule dialog |
NXOpen.AME.ConfigureResultTableBuilder | Represents configure result table class builder |
NXOpen.AME.ConnectToLibraryItemBuilder | JA class for the connect to library item dialog |
NXOpen.AME.CreateDefinitionBuilder | Create and classify definition |
NXOpen.AME.CreateEngObjectDefinitionBuilder | Create and classify engineering object definition |
NXOpen.AME.CreateTemplateDefinitionBuilder | Create and classify template definition |
NXOpen.AME.CreatePmiNoteBuilder | Create PMINote dialog JA class |
NXOpen.AME.CreateProductBuilder | Create and classify product |
NXOpen.AME.CreateTemplateBuilder | Create Template dialog JA class |
NXOpen.AME.DefineAspectBuilder | Define Aspects for Engineering Object Definition |
NXOpen.AME.DocumentStructureBuilder | Class to define Document Structure |
NXOpen.AME.EditAnnotationBuilder | the builder for creating edit annotation |
NXOpen.AME.EditClauseBuilder | Naming Rule Builder |
NXOpen.AME.EditEngineeringObjectBuilder | JA class for the Eng object dialog |
NXOpen.AME.EditOrderBuilder | JA class for the Edit Order dialog |
NXOpen.AME.EditQueryBuilder | Edit Query Builder |
NXOpen.AME.ElectricalAnnotationSettingsBuilder | JA class for the Electrical Annotation Settings dialog |
NXOpen.AME.ElectricalConnectionSettingsBuilder | Builder object for changing electrical connection settings on diagramming pages associated with the NXOpen.AME.Project |
NXOpen.AME.EngineeringObjectDefinitionLabelBuilder | JA class for the insert Engineering object definition label dialog |
NXOpen.AME.EplanImportProjectTemplateBuilder | EplanImportProjectTemplateBuilder |
NXOpen.AME.EplanProjectGenerationBuilder | the eplan project generation dialog builder |
NXOpen.AME.EplanProjectTemplateAndStructureBuilder | JA class for the Eplan project template dialog |
NXOpen.AME.EplanSettingsBuilder | EplanSettingsBuilder |
NXOpen.AME.EplanStructureIdentifierOrderBuilder | Represents a Eplan Structure identifier order Builder |
NXOpen.AME.EvaluatorCopyToBuilder | Copies evaluator and its dependents from one engineering object to another |
NXOpen.AME.ExportEClassMappingBuilder | Export eclass mapping into file |
NXOpen.AME.ExtractAttributeBaseBuilder | Create a extract attribute |
NXOpen.AME.ExtractAttributeAbsoluteBuilder | Create a extract attribute |
NXOpen.AME.ExtractAttributeCurrentObjectBuilder | Create a extract attribute |
NXOpen.AME.ExtractAttributePortBuilder | Create a extract port attribute builder |
NXOpen.AME.ExtractAttributeRelativeBuilder | Create a extract attribute |
NXOpen.AME.ExtractAttributeBuilder | Create a extract attribute |
NXOpen.AME.FormSheetBuilder | JA class for the Form Sheet dialog |
NXOpen.AME.FormSheetSettingsBuilder | JA class for the Form Sheet Settings dialog |
NXOpen.AME.FragmentBuilder | Represents a Fragment creation class Builder |
NXOpen.AME.FunctionCallInstanceBuilder | JA class for the reuse rule dialog |
NXOpen.AME.GeneralAnnotationSettingsBuilder | builder for the general annotation settings dialog |
NXOpen.AME.GeneralConnectionSettingsBuilder | Builder for the General Connection Settings dialog |
NXOpen.AME.GenerateReportsBuilder | Comment |
NXOpen.AME.GlobalSelectionBuilder | GlobalSelectionBuilder |
NXOpen.AME.GroupBuilder | JA class for groups |
NXOpen.AME.ImportEClassMappingBuilder | Import eClass mapping |
NXOpen.AME.ImportEClassProductBuilder | Imports a eclass product xml file |
NXOpen.AME.ImportEClassSchemaBuilder | Imports a eclass schema xml file |
NXOpen.AME.ImportEplanPageMacroBuilder | ImportEplanPageMacroBuilder |
NXOpen.AME.ImportGlobalMappingBuilder | Imports a global mapping xml file |
NXOpen.AME.ImportHWXmlBuilder | the Import HW Xml builder |
NXOpen.AME.InsertObjectBuilder | JA class for Insert Object dialog |
NXOpen.AME.InstanceDataBlockBuilder | JA class for the reuse rule dialog |
NXOpen.AME.InstantiateBaseDefinitionReuseSelectionBuilder | Builder for selecting base definition |
NXOpen.AME.InterruptionPointBuilder | Represents builder for AME::DB::InterruptionPoint |
NXOpen.AME.LayoutDefinitionBuilder | interface for the LayoutDefinitionBuilder |
NXOpen.AME.LineDesignerMappingBuilder | Line Designer mapping dialog JA interface |
NXOpen.AME.LinkSymbolToDeviceTypeBuilder | JA class for LinkSymbolToDeviceTypeBuilder dialog |
NXOpen.AME.LoadLineDesignerBuilder | JA class for the insert LoadLineDesigner dialog |
NXOpen.AME.Manage3DModelsBuilder | Represents the builder that is used to assign 3D models to a NXOpen.AME.ProductDefinition |
NXOpen.AME.ManageObjectTypeBuilder | Builder class for assigning AD type to NXOpen.Part and name to NXOpen.Assemblies.Component |
NXOpen.AME.MapToExistingObjectBuilder | Line Designer map to existing (EO) dialog JA interface |
NXOpen.AME.MountingInterfaceBuilder | Builder class for creating mounting interface object in NXOpen.Part |
NXOpen.AME.NamingRuleBuilder | Naming Rule Builder |
NXOpen.AME.NamingRuleSettingsBuilder | JA class for dialog for naming rule settings |
NXOpen.AME.OperandRuleBuilder | JA class for the parameter rule dialog |
NXOpen.AME.OperatorRuleBuilder | OperatorRule Dialog |
NXOpen.AME.OpticalAnnotationSettingsBuilder | JA class for the Optical Annotation Settings dialog |
NXOpen.AME.OpticalConnectionSettingsBuilder | Builder object for changing optical connection settings on diagramming pages associated with the NXOpen.AME.Project |
NXOpen.AME.OrderAspectsBuilder | Represents a OrderAspectsBuilder for changing the order of Navigator |
NXOpen.AME.PageNamingBuilder | Class to define Page naming schema |
NXOpen.AME.ParameterRuleBuilder | JA class for the parameter rule dialog |
NXOpen.AME.PlaceAutomationBuilder | Reassign a single aspect of an Engineering Object |
NXOpen.AME.PlcMemoryAreaBuilder | Represents a Subnet creation class Builder |
NXOpen.AME.PlcMethodBuilder | The Journalling class for PlcMethodBuilder |
NXOpen.AME.PlcSymbolBuilder | Class to create Functional Tags and assign them to PLC Channels |
NXOpen.AME.PlcVendorSymbolBuilder | Represents a Subnet creation class Builder |
NXOpen.AME.PortBuilder | builder for the software block properties dialog |
NXOpen.AME.PortConnectionBuilder | builder for the port connector dialog |
NXOpen.AME.PortsManagerBuilder | Provides journal methods for the ports manager dialog |
NXOpen.AME.ProductMatchingRulesBuilder | Represents Product Matching Rules class builder |
NXOpen.AME.ProductSelectionBuilder | JA class for Product Selection dialog |
NXOpen.AME.ProductSelectionDetailsBuilder | Represents a Product Selection Details class Builder |
NXOpen.AME.QueryBuilder | Represents query class builder |
NXOpen.AME.ReportsSettingsBuilder | interface for the ReportsSettingsBuilder |
NXOpen.AME.ReportTemplateBuilder | Class to create Report Template and assign the ReportQuery and Report Layout to them |
NXOpen.AME.SaveToLibraryBuilder | Create Software Block JA class |
NXOpen.AME.SchematicSymbolConfigurationBuilder | JA class for SchematicSymbolConfigurationBuilder dialog |
NXOpen.AME.SelectAndHighlightBuilder | Represents a SelectAndHighlightBuilder for select and highlight in the Navigators |
NXOpen.AME.SelectBaseDefinitionNodeBuilder | Builder for selecting base definition node from navigators |
NXOpen.AME.SelectClassificationFromTreeBuilder | Select Type from the Classification Library |
NXOpen.AME.SelectMountingInterfaceLocationBuilder | Builder for selecting mounting interface location from graphics window |
NXOpen.AME.ShowHideObjectsBuilder | JA class for ShowHideObjectsBuilder |
NXOpen.AME.SubnetBuilder | Represents a Subnet creation class Builder |
NXOpen.AME.SymbolAnnotationBuilder | Represents a Symbol Annotation creation class Builder |
NXOpen.AME.SymbolAnnotationSettingsBuilder | JA class for the symbol settings |
NXOpen.AME.SymbolAuthoringBuilder | Represents a Symbol Authoring class Builder |
NXOpen.AME.TCSavedQueriesBuilder | Represents a TC Saved Queries builder |
NXOpen.AME.TiaPortalProjectSettingsBuilder | TiaPortalProjectSettingsBuilder |
NXOpen.AME.TiaProjectItemBuilder | the TIA project item builder |
NXOpen.AME.TransferFileDataBuilder | Imports a new one or updates the existing configuration in AD Upstream Data Navigator from the external file |
NXOpen.AME.TypeMappingBuilder | JA class for the type mapping dialog |
NXOpen.AME.TypeMappingListBuilder | Type Mapping List Builder |
NXOpen.AME.UnloadLineDesignerBuilder | JA class for the insert UnloadLineDesigner dialog |
NXOpen.Annotations.AddTicBuilder | Represents a NXOpen.Annotations.AddTicBuilder |
NXOpen.Annotations.AppendedTextEditorBuilder | Represents a NXOpen.Annotations.AppendedTextEditorBuilder builder |
NXOpen.Annotations.AssociateDimensionBuilder | Represents a NXOpen.Annotations.AssociateDimensionBuilder |
NXOpen.Annotations.AssociativityBuilder | Represents a NXOpen.Annotations.AssociativityBuilder |
NXOpen.Annotations.AutomaticCenterlineBuilder | Builder for creating Automatic Centerlines |
NXOpen.Annotations.BaseAngularDimensionBuilder | Represents a NXOpen.Annotations.AngularDimension builder |
NXOpen.Annotations.AngularDimensionBuilder | Represents a NXOpen.Annotations.AngularDimension builder |
NXOpen.Annotations.MajorAngularDimensionBuilder | Represents a NXOpen.Annotations.AngularDimension builder |
NXOpen.Annotations.MinorAngularDimensionBuilder | Represents a NXOpen.Annotations.AngularDimension builder |
NXOpen.Annotations.PmiAngularDimensionBuilder | Represents a NXOpen.Annotations.AngularDimension builder |
NXOpen.Annotations.PmiMajorAngularDimensionBuilder | Represents a NXOpen.Annotations.AngularDimension builder |
NXOpen.Annotations.PmiMinorAngularDimensionBuilder | Represents a NXOpen.Annotations.AngularDimension builder |
NXOpen.SketchAngularDimensionBuilder | Represents a NXOpen.SketchAngularDimensionBuilder |
NXOpen.Annotations.BaseChamferDimensionBuilder | Represents a NXOpen.Annotations.BaseChamferDimension builder |
NXOpen.Annotations.ChamferDimensionBuilder | Represents a NXOpen.Annotations.ChamferDimension builder |
NXOpen.Annotations.PmiChamferDimensionBuilder | Represents a NXOpen.Annotations.PmiChamferDimension builder |
NXOpen.Annotations.BaseCurveLengthDimensionBuilder | Represents a NXOpen.Annotations.BaseArcLengthDimension builder |
NXOpen.Annotations.CurveLengthDimensionBuilder | Represents a NXOpen.Annotations.ArcLengthDimension builder |
NXOpen.Annotations.PmiCurveLengthDimensionBuilder | Represents a NXOpen.Annotations.PmiArcLengthDimension builder |
NXOpen.Annotations.BaseCustomSymbolBuilder | Represents a base Builder for Drafting and PMI Custom Symbol |
NXOpen.Annotations.DraftingCustomSymbolBuilder | Represents builder for Drafting Custom Symbol |
NXOpen.Annotations.PmiCustomSymbolBuilder | Represents builder for PMI Custom Symbol |
NXOpen.Annotations.BaseFrameBarBuilder | Represents a NXOpen.Annotations.BaseFrameBarBuilder |
NXOpen.Annotations.FrameBarBuilder | Represents a NXOpen.Annotations.FrameBarBuilder |
NXOpen.Annotations.BaseLinearDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.Annotations.LinearDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.Annotations.PmiLinearDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.SketchLinearDimensionBuilder | Represents a NXOpen.SketchLinearDimensionBuilder |
NXOpen.Annotations.BaseOrdinateDimensionBuilder | Represents a NXOpen.Annotations.OrdinateDimension builder |
NXOpen.Annotations.OrdinateDimensionBuilder | Represents a NXOpen.Annotations.OrdinateDimension builder |
NXOpen.Annotations.PmiOrdinateDimensionBuilder | Represents a NXOpen.Annotations.OrdinateDimension builder |
NXOpen.Annotations.BaseRadialDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.Annotations.PmiRadialDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.Annotations.RadialDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.SketchRadialDimensionBuilder | Represents a NXOpen.SketchRadialDimensionBuilder |
NXOpen.Annotations.BaseRapidDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.Annotations.PmiRapidDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.Annotations.RapidDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.SketchRapidDimensionBuilder | Represents a NXOpen.SketchRapidDimensionBuilder |
NXOpen.Annotations.BaseSymbolBuilder | Represents a Base Symbol Builder |
NXOpen.Annotations.CenterlineBuilder | Represents a Base Centerline Builder for all types of centerlines |
NXOpen.Annotations.BaseCenterline3dBuilder | Represents a Base Centerline3d Builder for pmi and drafting 3D centerlines |
NXOpen.Annotations.Centerline3dBuilder | Builder for creating 3D Centerline |
NXOpen.Annotations.PmiCenterline3dBuilder | Builder for creating Pmi 3D Centerline |
NXOpen.Annotations.BaseCenterMarkBuilder | Represents a Base CenterMark Builder for Pmi and Drafting centermark |
NXOpen.Annotations.CenterMarkBuilder | Builder for creating Center Mark |
NXOpen.Annotations.PmiCenterMarkBuilder | Builder for creating PMI Center Mark |
NXOpen.Annotations.Centerline2dBuilder | Builder for creating 2D Centerline |
NXOpen.Annotations.CircleCenterlineBuilder | Represents a CircleCenterline Builder |
NXOpen.Annotations.BaseBoltCircleCenterlineBuilder | Represents a Base Bolt Centerline Builder for Pmi and Drafting bolt circle centerline |
NXOpen.Annotations.BoltCircleCenterlineBuilder | Represents a BoltCircleCenterlineBuilder Builder |
NXOpen.Annotations.PmiBoltCircleCenterlineBuilder | Builder for creating or editing PMI Bolt Circle Centerline |
NXOpen.Annotations.CircularCenterlineBuilder | Represents a CircularCenterlineBuilder Builder |
NXOpen.Annotations.SymmetricalCenterlineBuilder | Builder for creating Symmetrical Centerline |
NXOpen.Annotations.IntersectionSymbolBuilder | Represents a NXOpen.Annotations.IntersectionSymbol builder |
NXOpen.Annotations.OffsetCenterPointBuilder | Represents a NXOpen.Annotations.OffsetCenterPoint builder |
NXOpen.Annotations.BaseThicknessDimensionBuilder | Represents a NXOpen.Annotations.BaseThicknessDimensionBuilder builder |
NXOpen.Annotations.PmiThicknessDimensionBuilder | Represents a NXOpen.Annotations.PmiConcentricCircleDimension builder |
NXOpen.Annotations.ThicknessDimensionBuilder | Represents a NXOpen.Annotations.ConcentricCircleDimension builder |
NXOpen.Annotations.BaseTitleBlockBuilder | Represents a NXOpen.Annotations.BaseTitleBlockBuilder builder |
NXOpen.Annotations.DefineTitleBlockBuilder | Represents a NXOpen.Annotations.DefineTitleBlockBuilder |
NXOpen.Annotations.EditTitleBlockBuilder | Represents a NXOpen.Annotations.EditTitleBlockBuilder builder |
NXOpen.Annotations.BendTableBuilder | Represents a NXOpen.Annotations.BendTableBuilder |
NXOpen.Annotations.CalloutGroupBuilder | Represents a NXOpen.Annotations.CalloutGroupBuilder |
NXOpen.Annotations.CustomerValueBusinessModifierBuilder | Represents a NXOpen.Annotations.CustomerValueBusinessModifier builder |
NXOpen.Annotations.DatumFeatureSymbolBuilder | Represents a Base Datum Feature Symbol Builder for all types of datum feature symbols |
NXOpen.Annotations.DraftingDatumFeatureSymbolBuilder | datum feature symbol builder |
NXOpen.Annotations.PmiDatumFeatureSymbolBuilder | datum feature symbol builder |
NXOpen.Annotations.DatumTargetBuilder | Represents a Datum target Builder |
NXOpen.Annotations.DraftingDatumTargetBuilder | Represents a NXOpen.Annotations.DraftingDatumTargetBuilder |
NXOpen.Annotations.PmiDatumTargetBuilder | Represents a NXOpen.Annotations.PmiDatumTargetBuilder |
NXOpen.Annotations.DraftingNoteBuilder | Represents a NXOpen.Annotations.Note builder |
NXOpen.Annotations.PmiNoteBuilder | Represents a NXOpen.Annotations.Note builder |
NXOpen.CAE.CaeNoteBuilder | Represents a CAE note builder class |
NXOpen.Annotations.EditLeaderBuilder | Represents a builder that provides an interface to adding and editing leaders to table entities |
NXOpen.Annotations.EditSymbolDisplayBuilder | Represents a EditSymbolPieces builder |
NXOpen.Annotations.FeatureControlFrameBuilder | Represents a NXOpen.Annotations.FeatureControlFrameBuilder |
NXOpen.Annotations.DraftingFeatureControlFrameBuilder | Represents a NXOpen.Annotations.DraftingFeatureControlFrameBuilder |
NXOpen.Annotations.PmiFeatureControlFrameBuilder | Represents a NXOpen.Annotations.PmiFeatureControlFrameBuilder |
NXOpen.Annotations.FeatureIdBusinessModifierBuilder | Represents a NXOpen.Annotations.FeatureIdBusinessModifier builder |
NXOpen.Annotations.GeodesicDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.Annotations.HatchBuilder | This class is used to construct the crosshatching that lies within a boundary |
NXOpen.Annotations.HoleTableBuilder | Represents a NXOpen.Annotations.HoleTableBuilder |
NXOpen.Annotations.IdSymbolBuilder | Represents a NXOpen.Annotations.IdSymbol builder |
NXOpen.Annotations.ImportAutocadBlockBuilder | Represents a builder allowing import of AutoCAD blocks |
NXOpen.Annotations.ImportSymbolBuilder | Represents a builder allowing import of one or many foreign symbols |
NXOpen.Annotations.LineWeldBuilder | Represents a NXOpen.Annotations.LineWeldBuilder |
NXOpen.Annotations.PmiLineWeldBuilder | Represents a NXOpen.Annotations.PmiLineWeld builder |
NXOpen.Annotations.MasterSymbolBuilder | Represents a Builder for MasterSymbol functionality |
NXOpen.Annotations.PartSymbolFolderBuilder | Represents a NXOpen.Annotations.PartSymbolFolderBuilder |
NXOpen.Annotations.PmiAttributeBuilder | Represents a NXOpen.Annotations.PmiAttribute builder |
NXOpen.Annotations.BalloonNoteBuilder | Represents a NXOpen.Annotations.BalloonNote builder |
NXOpen.Annotations.BaseSurfaceFinishBuilder | Represents a NXOpen.Annotations.BaseSurfaceFinish builder |
NXOpen.Annotations.DraftingSurfaceFinishBuilder | Represents a NXOpen.Annotations.DraftingSurfaceFinish builder |
NXOpen.Annotations.SurfaceFinishBuilder | Represents a NXOpen.Annotations.SurfaceFinish builder |
NXOpen.Annotations.CompanyProprietaryInformationBuilder | Represents a NXOpen.Annotations.CompanyProprietaryInformation builder |
NXOpen.Annotations.CoordinateNoteBuilder | Represents a NXOpen.Annotations.CoordinateNote builder |
NXOpen.Annotations.EnterpriseIdentificationBuilder | Represents a NXOpen.Annotations.EnterpriseIdentification builder |
NXOpen.Annotations.ExportControlBuilder | Represents a NXOpen.Annotations.ExportControl builder |
NXOpen.Annotations.GeneralNoteBuilder | Represents a NXOpen.Annotations.GeneralNote builder |
NXOpen.Annotations.GovernmentSecurityInformationBuilder | Represents a NXOpen.Annotations.GovernmentSecurityInformation builder |
NXOpen.Annotations.LocatorDesignatorBuilder | Represents a NXOpen.Annotations.LocatorDesignator builder |
NXOpen.Annotations.MaterialSpecificationBuilder | Represents a NXOpen.Annotations.MaterialSpecification builder |
NXOpen.Annotations.PartIdentificationBuilder | Represents a NXOpen.Annotations.PartIdentification builder |
NXOpen.Annotations.PmiIntegerBuilder | Represents a NXOpen.Annotations.PmiInteger builder |
NXOpen.Annotations.PmiNumberBuilder | Represents a NXOpen.Annotations.PmiNumber builder |
NXOpen.Annotations.PmiStringBuilder | Represents a NXOpen.Annotations.PmiString builder |
NXOpen.Annotations.PmiUrlNoteBuilder | Represents a NXOpen.Annotations.PmiUrlNote builder |
NXOpen.Annotations.PmiUserDefinedBuilder | Represents a NXOpen.Annotations.PmiUserDefined builder |
NXOpen.Annotations.ProcessSpecificationBuilder | Represents a NXOpen.Annotations.ProcessSpecification builder |
NXOpen.Annotations.SpecificNoteBuilder | Represents a NXOpen.Annotations.SpecificNote builder |
NXOpen.Annotations.PmiAttributeValueIntegerBuilder | Represents a NXOpen.Annotations.PmiAttributeValueInteger builder |
NXOpen.Annotations.PmiAttributeValueListBuilder | Represents a NXOpen.Annotations.PmiAttributeValueList builder |
NXOpen.Annotations.PmiAttributeValueMultipleStringBuilder | Represents a NXOpen.Annotations.PmiAttributeValueMultipleString builder |
NXOpen.Annotations.PmiAttributeValueNumberBuilder | Represents a NXOpen.Annotations.PmiAttributeValueNumber builder |
NXOpen.Annotations.PmiAttributeValueStringBuilder | Represents a NXOpen.Annotations.PmiAttributeValueString builder |
NXOpen.Annotations.PmiAttributeValueUrlBuilder | Represents a NXOpen.Annotations.PmiAttributeValueUrl builder |
NXOpen.Annotations.PmiTrackingPropertiesBuilder | Represents a NXOpen.Annotations.AngularDimension builder |
NXOpen.Annotations.PmiWaveLinkBuilder | Represents a NXOpen.Annotations.Pmi builder |
NXOpen.Annotations.QueryPmiBuilder | Represents a NXOpen.Annotations.QueryPmiBuilder |
NXOpen.Annotations.RegionBuilder | Represents a NXOpen.Annotations.RegionBuilder builder |
NXOpen.Annotations.ReplaceSymbolBuilder | Represents a Builder for Replace Custom Symbol functionality |
NXOpen.Annotations.RevisionBusinessModifierBuilder | Represents a NXOpen.Annotations.RevisionBusinessModifier builder |
NXOpen.Annotations.SafetyClassBusinessModifierBuilder | Represents a NXOpen.Annotations.SafetyClassBusinessModifier builder |
NXOpen.Annotations.SearchCriteriaDatumFeatureSymbolBuilder | Represents SearchCriteriaDatumFeatureSymbolBuilder |
NXOpen.Annotations.SearchCriteriaDatumTargetBuilder | Represents SearchCriteriaDatumTargetBuilder |
NXOpen.Annotations.SearchCriteriaDimensionBuilder | Represents SearchCriteriaDimensionBuilder |
NXOpen.Annotations.SearchCriteriaFeatureControlFrameBuilder | Represents SearchCriteriaFeatureControlFrameBuilder |
NXOpen.Annotations.SearchCriteriaPMINotesBuilder | Represents SearchCriteriaPMINotesBuilder |
NXOpen.Annotations.SearchCriteriaSurfaceFinishBuilder | Represents SearchCriteriaSurfaceFinishBuilder |
NXOpen.Annotations.SearchModelViewBuilder | Represents a NXOpen.Annotations.SearchModelViewBuilder |
NXOpen.Annotations.ShipDimensionBuilder | Represents a NXOpen.Annotations.Dimension builder |
NXOpen.Annotations.SmashCustomSymbolBuilder | Represents a NXOpen.Annotations.SmashCustomSymbolBuilder |
NXOpen.Annotations.SuppressPMIBuilder | Represents Annotations |
NXOpen.Annotations.SymbolCatalogBuilder | Represents a builder to instantiate a symbol from a parameterized family of standard symbols defined in catalogs, e.g |
NXOpen.Annotations.SymbolCatalogParameterBuilder | This builder allows you to define one parameter for a symbol |
NXOpen.Annotations.SymbolFileBuilder | Represents builder for drafting Symbol file builder |
NXOpen.Annotations.TableSectionBuilder | Represents a NXOpen.Annotations.TableSection builder |
NXOpen.Annotations.PmiTableBuilder | Represents a NXOpen.Annotations.PmiTableSection builder |
NXOpen.Annotations.TargetPointBuilder | Represents a NXOpen.Annotations.TargetPoint builder |
NXOpen.Annotations.UrlBusinessModifierBuilder | Represents a NXOpen.Annotations.UrlBusinessModifier builder |
NXOpen.ASCImporter | Represents a NXOpen.ASCImporter |
NXOpen.Assemblies.AbsolutePositionBuilder | Represents a builder class that absolutely positions the specified objects |
NXOpen.Assemblies.AddComponentBuilder | Represents a builder class that performs add existing component operation in current context |
NXOpen.Assemblies.AssembliesGeneralPropertiesBuilder | Represents an NXOpen.Assemblies.AssembliesGeneralPropertiesBuilder to be used for changing the general properties of a component |
NXOpen.Assemblies.AssembliesParameterPropertiesBuilder | Represents an NXOpen.Assemblies.AssembliesParameterPropertiesBuilder to be used for changing the name or modifying the positioning mixture status of a component |
NXOpen.Assemblies.ClearanceAnalysisBuilder | Represents NXOpen.Assemblies.ClearanceAnalysisBuilder |
NXOpen.Assemblies.ComponentPatternBuilder | Represents a builder class that performs various NXOpen.Assemblies.ComponentPattern operations |
NXOpen.Assemblies.ConstraintDisplayBuilder | The NXOpen.Assemblies.ConstraintDisplayBuilder can be used to control visibility of constraints and optionally components |
NXOpen.Assemblies.CopyDesignElementBuilder | Represents a builder class that performs copying design element operation in 4GD |
NXOpen.Assemblies.CreateComponentBuilder | Represents a NXOpen.Assemblies.CreateComponentBuilder builder class |
NXOpen.Assemblies.CreateNewComponentBuilder | Represents a NXOpen.Assemblies.CreateNewComponentBuilder builder class |
NXOpen.Assemblies.CreateOverridePartBuilder | Represents a builder class that creates empty override part in the specified design elements |
NXOpen.Assemblies.DeleteOverridePartBuilder | Represents a builder class that deletes override part in the specified design elements |
NXOpen.Assemblies.DesignElementBuilder | Represents a builder class that performs various design element operations |
NXOpen.Assemblies.HideComponentBuilder | Represents a NXOpen.Assemblies.HideComponentBuilder |
NXOpen.Assemblies.LoadInterpartDataBuilder | Represents a builderNXOpen.Assemblies.LoadInterpartDataBuilder |
NXOpen.Assemblies.MakeUniquePartBuilder | Represents a NXOpen.Assemblies.MakeUniquePartBuilder builder |
NXOpen.Assemblies.MechanicalRoutingSubsetBuilder | A MechanicalRoutingSubsetBuilder is used to create/edit Subsets NXOpen.Assemblies.Subset that are used to define the context needed to perform a Mechanical Routing Design activity |
NXOpen.Assemblies.PositioningGroupBuilder | Represents builder class for positioning group which is used to store constraints for design element |
NXOpen.Assemblies.PositioningTaskBuilder | Represents the class for positioning task builder |
NXOpen.Assemblies.ProductInterface.ObjectBuilder | Represents a Product Interface Object Builder |
NXOpen.Assemblies.ProductInterface.PropertyBuilder | Represents a NXOpen.Assemblies.ProductInterface.PropertyBuilder builder |
NXOpen.Assemblies.ProductOutlineBuilder | Represents a builder NXOpen.Assemblies.ProductOutlineBuilder |
NXOpen.Assemblies.RelinkerBuilder | Represents a NXOpen.Assemblies.RelinkerBuilder |
NXOpen.Assemblies.ReplaceComponentBuilder | Represents a NXOpen.Assemblies.ReplaceComponentBuilder builder |
NXOpen.Assemblies.SearchTermBuilder | A SearchTermBuilder is used to create or edit an NXOpen.Assemblies.SearchTerm |
NXOpen.Assemblies.AttributeSearchTermBuilder | An AttributeSearchTermBuilder is used to create or edit an NXOpen.Assemblies.AttributeSearchTerm |
NXOpen.Assemblies.BoxSearchTermBuilder | A BoxSearchTermBuilder is used to create or edit an NXOpen.Assemblies.BoxSearchTerm |
NXOpen.Assemblies.PlaneSearchTermBuilder | A PlaneSearchTermBuilder is used to create or edit an NXOpen.Assemblies.PlaneSearchTerm |
NXOpen.Assemblies.ProximitySearchTermBuilder | A ProximitySearchTermBuilder is used to create or edit an Assemblies.BoxSearchTerm |
NXOpen.Assemblies.RunContentProximitySearchTermBuilder | A RunContentProximitySearchTermBuilder is used to create or edit an Assemblies.RunContentProximitySearchTerm |
NXOpen.Assemblies.ShowComponentBuilder | Represents a NXOpen.Assemblies.ShowComponentBuilder |
NXOpen.Assemblies.SubsetBuilder | A SubsetBuilder is used to create or edit an NXOpen.Assemblies.Subset |
NXOpen.Assemblies.UpdateDesignElementPositionBuilder | Represents the builder class that updates positions of the DE's(Shape/Reuse) or Subordinates with override that are out of date |
NXOpen.Assemblies.UpdateStructureBuilder | Represents a builder NXOpen.Assemblies.UpdateStructureBuilder |
NXOpen.AttributePropertiesBaseBuilder | Represents an NXOpen.AttributePropertiesBaseBuilder to be used for creating attributes |
NXOpen.AttributePropertiesBuilder | Represents an NXOpen.AttributePropertiesBuilder |
NXOpen.PDM.PartOperationAttributePropertiesBuilder | Represents an NXOpen.PDM.PartOperationAttributePropertiesBuilder to be used for creating attributes in part operation |
NXOpen.PDM.PartOperationValidationPropertiesBuilder | Represents an NXOpen.PDM.PartOperationValidationPropertiesBuilder to be used for overriding the default validation parameters for a part in import operation |
NXOpen.PDM.PartCreationObjectAttributePropertiesBuilder | Represents an NXOpen.PDM.PartCreationObjectAttributePropertiesBuilder |
NXOpen.AttributeTemplatesBuilder | Represents an NXOpen.AttributeTemplatesBuilder to be used when creating attribute templates |
NXOpen.CAE.AdaptivityExclusionZoneBuilder | Builds a NXOpen.CAE.AdaptivityExclusionZone object which represets adaptivity meta solution related exclusion zones |
NXOpen.CAE.AdaptivityMetaSolutionBuilder | Builds a NXOpen.CAE.AdaptivityMetaSolution object which represets a recipe for generating adaptive remesh |
NXOpen.CAE.AeroStructures.LoadCaseListBuilder | This is a manager to the loadcases of CAE.AeroStructures.MarginSolution class |
NXOpen.CAE.AeroStructures.LoadCaseSetBuilder | This is a manager to the CAE.AeroStructures.LoadCaseSet class |
NXOpen.CAE.AeroStructures.MarginCalculationBuilder | Represents a NXOpen.CAE.AeroStructures.MarginCalculation builder |
NXOpen.CAE.AeroStructures.MarginSolutionBuilder | This is a manager to the CAE.AeroStructures.MarginSolution class |
NXOpen.CAE.AlternateFemRepresentationSourceBuilder | Represents a NXOpen.CAE.AlternateFemRepresentationSourceBuilder which can be used to create FemDataSets |
NXOpen.CAE.AtvSetBuilder | Represents a NXOpen.CAE.AtvSetBuilder which can be used to create ATVSets |
NXOpen.CAE.FrfSetBuilder | Represents a NXOpen.CAE.FrfSetBuilder which can be used to create FrfSets |
NXOpen.CAE.ModeSetBuilder | Represents a NXOpen.CAE.ModeSetBuilder which can be used to create ModeSets |
NXOpen.CAE.AssignNodalCSBuilder | Represents a NXOpen.CAE.AssignNodalCSBuilder |
NXOpen.CAE.AttachElementsBuilder | Represents a NXOpen.CAE.AttachElementsBuilder |
NXOpen.CAE.AutoBCBuilder | Builds one or more NXOpen.CAE.SimSimulationObject object(s) |
NXOpen.CAE.AutoCyclicSymmetryPairsBuilder | Builds a NXOpen.CAE.AutoPairs object which represents a recipe for generating face pairs from a selected set of faces in the model |
NXOpen.CAE.AutoHealGeometryBuilder | Builder for creating Auto Heal Geometry |
NXOpen.CAE.AutoMacViewerBuilder | Represents the correlation pairing viewer builder |
NXOpen.CAE.AutomaticMorphBuilder | Represents a NXOpen.CAE.AutomaticMorphBuilder |
NXOpen.CAE.AutomaticSweepBetweenSelection | Builder for creating Manual Hex Mesh - Face Dependency type - Multi Face Automatic |
NXOpen.CAE.AutoPairsBuilder | Builds a NXOpen.CAE.AutoPairs object which represets a recipe for generating face pairs from a selected set of faces or solids in the model whose distance is less than a specified tolerance |
NXOpen.CAE.BcLabelManagerBuilder | Represents a NXOpen.CAE.BcLabelManagerBuilder builder which can be used to renumber NXOpen.CAE.SimBC id |
NXOpen.CAE.BCSelectionDisplayBuilder | This class provides BC Selection Visual Display support, use this class to get the BC types in current solution, adds special BCs to list, and display the BC's selection geometry with the BC's color to do visually check |
NXOpen.CAE.BeamEADBuilder | This class provides Beam/Bar Associated Data Support |
NXOpen.CAE.BoltBuilder | Represents a NXOpen.CAE.BoltBuilder |
NXOpen.CAE.BushingEADBuilder | This class provides Bushing Associated Data Support |
NXOpen.CAE.CAEConnectionBuilder | Represents a NXOpen.CAE.CAEConnectionBuilder which can be used to create 1D connections |
NXOpen.CAE.CaeRegionBuilder | Represents a NXOpen.CAE.CaeRegionBuilder builder |
NXOpen.CAE.CAEWeldConnectionBuilder | Builder for creating 1D Weld Connection |
NXOpen.CAE.CfdAutoRefinementConstraintBuilder | Represents a NXOpen.CAE.CfdAutoRefinementConstraint builder |
NXOpen.CAE.CfdContactPreventionConstraintBuilder | Represents a NXOpen.CAE.CfdContactPreventionConstraint builder |
NXOpen.CAE.CfdLocalResolutionConstraintBuilder | Represents a NXOpen.CAE.CfdLocalResolutionConstraint builder |
NXOpen.CAE.CircularImprintBuilder | Builder for creating Circular Imprint |
NXOpen.CAE.ComacViewerBuilder | Represents the correlation MAC matrix viewer builder |
NXOpen.CAE.CombineTrisBuilder | Builder for creating Combine Tris |
NXOpen.CAE.CompanionResultBuilder | Represents a NXOpen.CAE.CompanionResult builder and can be used to create or edit an NXOpen.CAE.CompanionResult |
NXOpen.CAE.ConflictResolutionBuilder | Represents a NXOpen.CAE.ConflictResolutionBuilder builder which can resolve conflicts between the two input BCs by a specified rule |
NXOpen.CAE.ConstraintResolutionBuilder | Represents a NXOpen.CAE.ConstraintResolutionBuilder builder which can resolve conflicts between the two input constraints by a specified rule |
NXOpen.CAE.ContactMeshBuilder | Represents a NXOpen.CAE.ContactMeshBuilder |
NXOpen.CAE.ConvertToConvergentBodyBuilder | Builder for creating a convergent body from CAE |
NXOpen.CAE.ConvexMeshBuilder | Represents a NXOpen.CAE.ConvexMeshBuilder |
NXOpen.CAE.CorrelBaseBuilder | Represents the abstract builder class for all objects defined in correl meta solution |
NXOpen.CAE.CorrelAlignmentBuilder | This builder is used to control the alignment parameters of a NXOpen.CAE.CorrelSolution |
NXOpen.CAE.CorrelApplyAlignmentFromBuilder | This builder is used to apply the alignment matrix read from selected xml file to the test model |
NXOpen.CAE.CorrelFineTuneAlignmentBuilder | This builder is used to nudge the alignment by a fine adjustment |
NXOpen.CAE.CorrelModePairingBuilder | This builder is used to control the mode pairing behavior of a NXOpen.CAE.CorrelSolution |
NXOpen.CAE.CorrelSolutionBuilder | This is a manager to the CAE.CorrelSolution class |
NXOpen.CAE.ModelUpdateSolutionBuilder | Represents a NXOpen.CAE.ModelUpdateSolutionBuilder |
NXOpen.CAE.CreateJtBuilder | Represents a NXOpen.CAE.CreateJtBuilder |
NXOpen.CAE.DamperEADBuilder | This class provides Damper Associated Data Support |
NXOpen.CAE.DataProcessingBlockBuilder | Builds a NXOpen.CAE.DataProcessingBlock object which represets a data processing block |
NXOpen.CAE.DataProcessingBuilder | Builds a NXOpen.CAE.DataProcessing object which represets a data processing meta solution |
NXOpen.CAE.DataSourceBuilder | Represents a NXOpen.CAE.DataSourceBuilder which can be used to create scenario data sources |
NXOpen.CAE.DeletePolygonFaceBuilder | Builder for Delete Polygon Face |
NXOpen.CAE.DependentMeshBuilder | Represents a NXOpen.CAE.Mesh2d |
NXOpen.CAE.DisplayNodalCsysBuilder | Represents a CAE.DisplayNodalCsysBuilder |
NXOpen.CAE.DurabilityDamageEvaluationBuilder | Represents the builder for evaluating durability damage |
NXOpen.CAE.DurabilityEvaluateFatigueHistoryBuilder | Represents the builder for evaluating fatigue histories |
NXOpen.CAE.DurabilityEventBuilder | Represents the abstract builder class for all durability events |
NXOpen.CAE.DurabilityRandomEventBuilder | Represents the builder for the random durability event |
NXOpen.CAE.DurabilityStaticEventBuilder | Represents the builder for the static durability event |
NXOpen.CAE.DurabilityTransientEventBuilder | Represents the builder for the transient durability event |
NXOpen.CAE.DurabilityEventFatigueSettingsBuilder | Represents a builder class for the event fatigue settings |
NXOpen.CAE.DurabilityEventOverridesBuilder | Represents a builder class for Event Overrides |
NXOpen.CAE.DurabilityEventSolverBuilder | Represents the builder for solving the durability event |
NXOpen.CAE.DurabilityEventStrengthSettingsBuilder | Represents a builder class for the event strength settings |
NXOpen.CAE.DurabilityExcitationBuilder | Represents the abstract builder class for all durability excitations |
NXOpen.CAE.DurabilityFunctionExcitationBuilder | Represents a NXOpen.CAE.DurabilityFunctionExcitation builder |
NXOpen.CAE.DurabilityLoadPatternBuilder | Represents a CAE.DurabilityLoadPattern builder |
NXOpen.CAE.DurabilityResultPathBuilder | Represents a NXOpen.CAE.DurabilityResultPath builder |
NXOpen.CAE.DurabilityMetaSolutionBuilder | Represents a NXOpen.CAE.DurabilityMetaSolution builder |
NXOpen.CAE.DurabilityRandomFatigueBuilder | Represents a builder class for the event fatigue settings |
NXOpen.CAE.DurabilityResultsReportBuilder | Represents the builder for reporting the durability results |
NXOpen.CAE.DurabilitySolverBuilder | Represents the builder for solving the durability solution process |
NXOpen.CAE.DurabilityStrainGageAnalyzerBuilder | Represents the builder for analyzing strain gage data |
NXOpen.CAE.DurabilityStressAxesBuilder | Represents a builder class for the event fatigue settings |
NXOpen.CAE.EdgeFaceImprintBuilder | Builder for creating Face Face Imprint |
NXOpen.CAE.EdgeSticherBuilder | Represents a NXOpen.CAE.EdgeSticherBuilder |
NXOpen.CAE.ElementConnectivityBuilder | Represents a NXOpen.CAE.ElementConnectivityBuilder |
NXOpen.CAE.ElementCreateBuilder | Represents a NXOpen.CAE.ElementCreateBuilder which allows you to manually create elements from existing nodes |
NXOpen.CAE.ElementDeleteBuilder | Represents a NXOpen.CAE.ElementDeleteBuilder |
NXOpen.CAE.ElementDetachBuilder | Represents a NXOpen.CAE.ElementDetachBuilder |
NXOpen.CAE.ElementExtractBuilder | Builder for creating Element Extract |
NXOpen.CAE.ElementExtrudeBuilder | Represents a NXOpen.CAE.ElementExtrudeBuilder |
NXOpen.CAE.ElementModifyLabelBuilder | Represents a NXOpen.CAE.ElementModifyLabelBuilder |
NXOpen.CAE.ElementModifyOrderBuilder | Represents a NXOpen.CAE.ElementModifyOrderBuilder |
NXOpen.CAE.ElementModifyTypeBuilder | Represents a NXOpen.CAE.ElementModifyTypeBuilder |
NXOpen.CAE.ElementProjectBuilder | Represents a NXOpen.CAE.ElementProjectBuilder |
NXOpen.CAE.ElementReflectBuilder | Represents a NXOpen.CAE.ElementReflectBuilder |
NXOpen.CAE.ElementRevolveBuilder | Represents a NXOpen.CAE.ElementRevolveBuilder |
NXOpen.CAE.ElementRotateBuilder | Represents a NXOpen.CAE.ElementRotateBuilder |
NXOpen.CAE.ElementSplitBuilder | Represents a NXOpen.CAE.ElementSplitBuilder |
NXOpen.CAE.ElementTranslateBuilder | Represents a NXOpen.CAE.ElementTranslateBuilder |
NXOpen.CAE.FaceFaceImprintBuilder | Builder for creating Face Face Imprint |
NXOpen.CAE.FaceFromBoundaryBuilder | Builder for creating Polygon Face by boundary |
NXOpen.CAE.FlatPatternsBuilder | Represents a Flat Patterns Builder |
NXOpen.CAE.FluidDomainBuilder | Represents a NXOpen.CAE.FluidDomainRecipe |
NXOpen.CAE.FreeBodyResultsBuilder | Represents a NXOpen.CAE.FreeBodyResultsBuilder |
NXOpen.CAE.FreezeGeometryBuilder | Builder for creating Freeze Geometry |
NXOpen.CAE.FunctionBuilder | This builder class is used to create or edit NXOpen.CAE.Function objects |
NXOpen.CAE.GapEADBuilder | This class provides Gap Associated Data Support |
NXOpen.CAE.GlobalLayupImportFromPptBuilder | Represents a Global Layup IMport From Ppt Builder |
NXOpen.CAE.GraphFromResultProbeBuilder | Represents a NXOpen.CAE.GraphFromResultProbeBuilder |
NXOpen.CAE.GroupByBoundaryBuilder | Represents a CAE.GroupByBoundaryBuilder |
NXOpen.CAE.IBeamSectionBuilder | Represents a NXOpen.CAE.IBeamSectionBuilder |
NXOpen.CAE.GeneralGeometryBeamSectionBuilder | Represents a NXOpen.CAE.GeneralGeometryBeamSectionBuilder |
NXOpen.CAE.StandardBeamSectionBuilder | Represents a NXOpen.CAE.StandardBeamSectionBuilder |
NXOpen.CAE.UserDefinedSolidBeamSectionBuilder | Represents a NXOpen.CAE.UserDefinedSolidBeamSectionBuilder |
NXOpen.CAE.ImportedSolutionBuilder | Represents a NXOpen.CAE.ImportedSolutionBuilder builder |
NXOpen.CAE.ImportSimulationBuilder | Represents NXOpen.CAE.ImportSimulationBuilder |
NXOpen.CAE.ImprintBuilder | Builder for creating Imprint |
NXOpen.CAE.InterpolationEADBuilder | This class provides Interpolation Associated Data Support |
NXOpen.CAE.LaminateDampingFactorBuilder | The builder for the damping factor |
NXOpen.CAE.LaminateDrapingDataBuilder | Represents a NXOpen.CAE.LaminateDrapingData builder |
NXOpen.CAE.LaminateDrapingExtensionBuilder | Builder class for NXOpen.CAE.LaminateDrapingExtension |
NXOpen.CAE.LaminateDynamicEventBuilder | Represents a NXOpen.CAE.LaminateDynamicEvent builder |
NXOpen.CAE.LaminateRandomEventBuilder | Represents a NXOpen.CAE.LaminateRandomEvent builder |
NXOpen.CAE.LaminateSineEventBuilder | Represents a NXOpen.CAE.LaminateSineEvent builder |
NXOpen.CAE.LaminateDynamicSimBuilder | Represents a NXOpen.CAE.LaminateDynamicSim builder |
NXOpen.CAE.LaminateElementFilterBuilder | Represents a NXOpen.CAE.LaminateGraphicalReport builder |
NXOpen.CAE.LaminateExtrudeSetupBuilder | Represents a NXOpen.CAE.LaminateExtrudeSetup builder |
NXOpen.CAE.LaminateFiberOrientationOptionsBuilder | Represents a NXOpen.CAE.LaminateFiberOrientationOptions builder |
NXOpen.CAE.LaminateFillSetupBuilder | Represents a NXOpen.CAE.LaminateFillSetupBuilder builder |
NXOpen.CAE.LaminateGraphicalReportBuilder | Represents a CAE.LaminateGraphicalReport builder |
NXOpen.CAE.LaminateImportedLayupBuilder | Represents a NXOpen.CAE.LaminateImportedLayupBuilder builder |
NXOpen.CAE.LaminateImportZonesBuilder | Represents a NXOpen.CAE.LaminateImportZonesBuilder builder |
NXOpen.CAE.LaminateLayupOffsetBuilder | Represents a NXOpen.CAE.LaminateLayupOffset builder |
NXOpen.CAE.LaminateLockAngleBuilder | Represents a builder |
NXOpen.CAE.LaminateMatOrientationBuilder | Represents a NXOpen.CAE.LaminateMatOrientation builder |
NXOpen.CAE.LaminatePlyFilterBuilder | Represents a NXOpen.CAE.LaminatePlyFilterBuilder |
NXOpen.CAE.LaminatePlyMaxThicknessVarBuilder | Builder used to modify the ply maximum accepted thickness variation for laminate fill |
NXOpen.CAE.LaminatePostReportBuilder | Represents a NXOpen.CAE.LaminatePostReport builder |
NXOpen.CAE.LaminateQuickReportBuilder | Represents a NXOpen.CAE.LaminateQuickReport builder |
NXOpen.CAE.LaminateRelabelPliesBuilder | Represents a CAE.LaminateDynamicEvent builder |
NXOpen.CAE.LaminateSelectEntitiesBuilder | Represents a NXOpen.CAE.LaminateSelectEntitiesBuilder |
NXOpen.CAE.LaminateSpreadsheetReportBuilder | Represents a NXOpen.CAE.LaminateSpreadsheetReport builder |
NXOpen.CAE.LaminateViewDrapingResultsBuilder | Represents the builder for the draping results viewer |
NXOpen.CAE.LayoutStateApplicator | Represents a NXOpen.CAE.LayoutStateApplicator which can be used to visualize a layout state |
NXOpen.CAE.LayoutStateBuilder | Represents a NXOpen.CAE.LayoutStateBuilder which can be used to create layout states |
NXOpen.CAE.LbcAssociationMgr | Represents an abstract NXOpen.CAE.LbcAssociationMgr |
NXOpen.CAE.SolutionManager | Represents NXOpen.CAE.SolutionManager |
NXOpen.CAE.StepManager | Represents NXOpen.CAE.StepManager |
NXOpen.CAE.LocalRemeshBuilder | Represents a NXOpen.CAE.LocalRemeshBuilder |
NXOpen.CAE.LumpedMassEADBuilder | This class provides LumpedMass Associated Data Support |
NXOpen.CAE.ManualMorphBuilder | Represents a NXOpen.CAE.ManualMorphBuilder |
NXOpen.CAE.ManualNodeAssociationBuilder | Represents a NXOpen.CAE.ManualNodeAssociationBuilder |
NXOpen.CAE.ManualSweepBetweenSelection | Builder for creating Manual Hex Mesh - Face Dependency type |
NXOpen.CAE.MappedMeshBuilder | Represents a Mapped Mesh Builder |
NXOpen.CAE.MechanicalLoadSumBuilder | Represents a NXOpen.CAE.MechanicalLoadSumBuilder |
NXOpen.CAE.MergeFaceBuilder | Builder for creating Merge Face |
NXOpen.CAE.Mesh0dBuilder | Represents 0D Mesh * Used to create a NXOpen.CAE.Mesh0d |
NXOpen.CAE.Mesh1dBuilder | Represents 1d Mesh * Used to create a NXOpen.CAE.Mesh1d |
NXOpen.CAE.Mesh2dBuilder | Represents 2D Mesh * Used to create a NXOpen.CAE.Mesh2d |
NXOpen.CAE.Mesh3dHexBuilder | Represents 3D Hex Mesh * Used to create a NXOpen.CAE.SweptMesh |
NXOpen.CAE.Mesh3dHybridBuilder | Represents 3D Mesh * Used to create a CAE.Mesh3d |
NXOpen.CAE.Mesh3dTetBuilder | Represents 3D Mesh * Used to create a CAE.Mesh3d |
NXOpen.CAE.MeshCollectorBuilder | Represents a NXOpen.CAE.MeshCollectorBuilder |
NXOpen.CAE.MeshCollectorOccurrenceBuilder | Represents a NXOpen.CAE.MeshCollectorOccurrenceBuilder |
NXOpen.CAE.MeshControlBuilder | Represents a NXOpen.CAE.MeshControl |
NXOpen.CAE.MeshControlDisplayOptionsBuilder | Represents a NXOpen.CAE.MeshControlDisplayOptionsBuilder |
NXOpen.CAE.MeshFromBoundaryBuilder | Represents a NXOpen.CAE.MeshFromBoundaryBuilder |
NXOpen.CAE.MeshPointBaseBuilder | Represents a NXOpen.CAE.MeshPointBaseBuilder |
NXOpen.CAE.MeshPointConicCenterBuilder | Represents a NXOpen.CAE.MeshPointConicCenterBuilder |
NXOpen.CAE.MeshPointExistingPointBuilder | Represents a NXOpen.CAE.MeshPointExistingPointBuilder |
NXOpen.CAE.MeshPointInsideVolumeBuilder | Represents a NXOpen.CAE.MeshPointInsideVolumeBuilder |
NXOpen.CAE.MeshPointMultipleOnCurveBuilder | Represents a NXOpen.CAE.MeshPointMultipleOnCurveBuilder |
NXOpen.CAE.MeshPointOnCurveBuilder | Represents a NXOpen.CAE.MeshPointOnCurveBuilder |
NXOpen.CAE.MeshPointOnFaceBuilder | Represents a NXOpen.CAE.MeshPointOnFaceBuilder |
NXOpen.CAE.MeshPointProjectBuilder | Represents a NXOpen.CAE.MeshPointProjectBuilder |
NXOpen.CAE.MeshRefinementBuilder | Represents Mesh Refinement * Used to create a NXOpen.CAE.MeshRefinementBuilder |
NXOpen.CAE.MMCCreateBuilder | Represents a NXOpen.CAE.MMCCreateBuilder which can be used to create or edit NXOpen.CAE.MeshMate objects |
NXOpen.CAE.ModelCheck.AlignBeamElementDirectionBuilder | Represents a NXOpen.CAE.ModelCheck.AlignBeamElementDirectionBuilder builder used to align the Directions of connected beam elements with a seed beam element |
NXOpen.CAE.ModelCheck.AlignShellElementFirstEdgeBuilder | Represents a NXOpen.CAE.ModelCheck.AlignShellElementFirstEdgeBuilder builder used to align the first edges of connected shell elements with a seed element edge |
NXOpen.CAE.ModelCheck.AlignShellElementNormalBuilder | Represents a NXOpen.CAE.ModelCheck.AlignShellElementNormalBuilder builder used to align the normals of connected shell elements with a seed shell element |
NXOpen.CAE.ModelCheck.DuplicateElementsCheckBuilder | Represents a NXOpen.CAE.ModelCheck.DuplicateElementsCheckBuilder to check for duplicate elements within the candidate elements |
NXOpen.CAE.ModelCheck.DuplicateNodesCheckBuilder | Represents a NXOpen.CAE.ModelCheck.DuplicateNodesCheckBuilder to check for duplicate nodes within the candidate nodes |
NXOpen.CAE.ModelCheck.ElementEdgeCheckBuilder | Represents a NXOpen.CAE.ModelCheck.ElementEdgeCheckBuilder which can be used to detect free element edges or non-manifold edges |
NXOpen.CAE.ModelCheck.ElementMaterialOrientationCheckBuilder | Represents a NXOpen.CAE.ModelCheck.ElementMaterialOrientationCheckBuilder used to check the material orientation for shell and solid elements |
NXOpen.CAE.ModelCheck.ElementQualityCheckBuilder | Represents a NXOpen.CAE.ModelCheck.ElementQualityCheckBuilder to perform quality checking on the candidate elements |
NXOpen.CAE.ModelCheck.FaceClearanceCheckBuilder | Represents a NXOpen.CAE.ModelCheck.FaceClearanceCheckBuilder to perform polygon face interference or clearance check |
NXOpen.CAE.ModelCheck.ModelSetupCheckBuilder | Represents a NXOpen.CAE.ModelCheck.ModelSetupCheckBuilder which can be used to check if the active NXOpen.CAE.SimSolution contains all the necessary items for the analysis, including elements, loads, constraints and materials |
NXOpen.CAE.ModelCheck.ReverseBeamElementDirectionBuilder | Represents a NXOpen.CAE.ModelCheck.ReverseBeamElementDirectionBuilder used to reverse directions for specified beam elements |
NXOpen.CAE.ModelCheck.ReverseShellElementNormalBuilder | Represents a NXOpen.CAE.ModelCheck.ReverseShellElementNormalBuilder used to reverse normals for specified shell elements |
NXOpen.CAE.ModelCheck.SolidElementFaceNormalBuilder | Represents a NXOpen.CAE.ModelCheck.SolidElementFaceNormalBuilder used to reorient normals for left handed solid elements |
NXOpen.CAE.ModelDisplayBuilder | This class provides Model Display Data Support |
NXOpen.CAE.ModelUpdateCorrelMethodBuilder | Represents a NXOpen.CAE.ModelUpdateCorrelMethodBuilder |
NXOpen.CAE.ModelUpdateDesignVariablesRapidCreateBuilder | This class is the builder that is used for the rapid creation of design variables |
NXOpen.CAE.ModelUpdateOptimOptionsBuilder | Represents a NXOpen.CAE.ModelUpdateOptimOptionsBuilder |
NXOpen.CAE.ModelUpdateOptionsBuilder | Represents a NXOpen.CAE.ModelUpdateOptionsBuilder |
NXOpen.CAE.ModelUpdateOverallWeightsBuilder | Represents a NXOpen.CAE.ModelUpdateOverallWeightsBuilder |
NXOpen.CAE.ModelUpdateSensitivityViewerBuilder | Represents NXOpen.CAE.ModelUpdateSensitivityViewerBuilder |
NXOpen.CAE.MorphRevolvedMeshBuilder | Represents a NXOpen.CAE.MorphRevolvedMeshBuilder |
NXOpen.CAE.MoveNodeBuilder | Represents a NXOpen.CAE.MoveNodeBuilder |
NXOpen.CAE.MultipleElementCreateBuilder | Represents a NXOpen.CAE.MultipleElementCreateBuilder which can be used to create mutiple elements in one efficient opertation |
NXOpen.CAE.MultipleNodeCreateBuilder | Represents a NXOpen.CAE.MultipleNodeCreateBuilder which can be used to create mutiple nodes in one efficient opertation |
NXOpen.CAE.NodalForceReportBuilder | Nodal Force Report Builder |
NXOpen.CAE.NodeAlignBuilder | Represents a NXOpen.CAE.NodeAlignBuilder |
NXOpen.CAE.NodeAssociationBuilder | Represents a NXOpen.CAE.NodeAssociationBuilder |
NXOpen.CAE.NodeCreateBuilder | Represents a NXOpen.CAE.NodeCreateBuilder |
NXOpen.CAE.NodeDeleteBuilder | Represents a NXOpen.CAE.NodeDeleteBuilder |
NXOpen.CAE.NodeDissociationBuilder | Represents a NXOpen.CAE.NodeDissociationBuilder |
NXOpen.CAE.NodeElementInfoBuilder | Represents a NXOpen.CAE.NodeElementInfoBuilder |
NXOpen.CAE.NodeModifyLabelBuilder | Represents a NXOpen.CAE.NodeModifyLabelBuilder |
NXOpen.CAE.NodeModifyLocationBuilder | Represents a NXOpen.CAE.NodeModifyLocationBuilder |
NXOpen.CAE.NodeProjectBuilder | Represents a NXOpen.CAE.NodeProjectBuilder |
NXOpen.CAE.NodeReflectBuilder | Represents a NXOpen.CAE.NodeReflectBuilder |
NXOpen.CAE.NodeRotateBuilder | Represents a NXOpen.CAE.NodeRotateBuilder |
NXOpen.CAE.NodesBetweenNodesBuilder | Represents a NXOpen.CAE.NodesBetweenNodesBuilder |
NXOpen.CAE.NodesOnCurveBuilder | Represents a NXOpen.CAE.NodesOnCurveBuilder |
NXOpen.CAE.NodesRepositionBuilder | Represents a NXOpen.CAE.NodesRepositionBuilder |
NXOpen.CAE.NodeTranslateBuilder | Represents a NXOpen.CAE.NodeTranslateBuilder |
NXOpen.CAE.OneDimensionalElementSplitBuilder | Represents a NXOpen.CAE.OneDimensionalElementSplitBuilder |
NXOpen.CAE.OpenDuctMeshBuilder | Represents a NXOpen.CAE.OpenDuctMeshBuilder |
NXOpen.CAE.Optimization.DAOConstraintBuilder | Represents a NXOpen.CAE.Optimization.DAOConstraintBuilder |
NXOpen.CAE.Optimization.DAODesignVariableBuilder | Represents a NXOpen.CAE.Optimization.DAODesignVariableBuilder |
NXOpen.CAE.Optimization.DAOSolutionBuilder | Represents a NXOpen.CAE.Optimization.DAOSolutionBuilder |
NXOpen.CAE.Optimization.TBSBaseDesignVariableBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSDesignVariable |
NXOpen.CAE.Optimization.TBSDesignResponseBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSDesignResponse |
NXOpen.CAE.Optimization.TBSDesignVariableBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSDesignVariable |
NXOpen.CAE.Optimization.TBSConstraintBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSConstraint |
NXOpen.CAE.Optimization.TBSOptimizationSolutionBuilder | Represents the abstract builder of NXOpen.CAE.Optimization.TBSOptimizationSolution |
NXOpen.CAE.Optimization.TBSShapeOptimizationSolutionBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSShapeOptimizationSolution |
NXOpen.CAE.Optimization.TBSTopologyOptimizationSolutionBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSTopologyOptimizationSolution |
NXOpen.CAE.Optimization.TBSRestrictAreaBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSRestrictArea |
NXOpen.CAE.Optimization.TBSShapeRestrictAreaBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSShapeRestrictArea |
NXOpen.CAE.Optimization.TBSTopologyRestrictAreaBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSTopologyRestrictArea |
NXOpen.CAE.Optimization.TBSSmoothBuilder | Represents the builder of NXOpen.CAE.Optimization.TBSSmooth |
NXOpen.CAE.PolygonFaceOnMeshBuilder | Builder for creating Polygon Face On Mesh |
NXOpen.CAE.PostGraphBuilder | Represents a NXOpen.CAE.PostGraphBuilder |
NXOpen.CAE.Post3DGraphBuilder | Represents a NXOpen.CAE.Post3DGraphBuilder |
NXOpen.CAE.PostGraphAcrossIterationsBuilder | Represents a NXOpen.CAE.PostGraphAcrossIterationsBuilder |
NXOpen.CAE.PostGraphAlongPathBuilder | Represents a NXOpen.CAE.PostGraphAlongPathBuilder |
NXOpen.CAE.PostGraphOrbitBuilder | Represents a NXOpen.CAE.PostGraphOrbitBuilder |
NXOpen.CAE.PostJtExportBuilder | Represents a NXOpen.CAE.PostJtExportBuilder used for exporting JTs of Result Types in Post Processing |
NXOpen.CAE.PostProcessingSessionApplicator | Represents a NXOpen.CAE.PostProcessingSessionApplicator which can be used to visualize a post processing pession |
NXOpen.CAE.PostScenarioBuilder | This class represents a NXOpen.CAE.PostScenarioBuilder |
NXOpen.CAE.PostScenarioBuilderSlot | This class represents a NXOpen.CAE.PostScenarioBuilderSlot |
NXOpen.CAE.PreTestDofSetBuilder | Represents a NXOpen.CAE.PreTestDofSet builder |
NXOpen.CAE.PreTestExciterConfigBuilder | Represents a NXOpen.CAE.PreTestExciterConfig builder |
NXOpen.CAE.PreTestExportUnvBuilder | This is a manager to the NXOpen.CAE.PreTestExportUnvBuilder class |
NXOpen.CAE.PreTestSensorConfigBuilder | Represents a NXOpen.CAE.PreTestSensorConfig builder |
NXOpen.CAE.PreTestSolutionBuilder | Represents a NXOpen.CAE.PreTestSolution builder |
NXOpen.CAE.PrimitiveMeshBuilder | Represents Primitive Mesh * Used to create a CAE.Mesh |
NXOpen.CAE.PrimitiveRecipeMeshBuilder | Represents a Primitive Recipe Mesh * Used to create a CAE.Mesh |
NXOpen.CAE.ProjectNodesToCadGeometryBuilder | Allows you to query the mesh nodes that are off the underlying Cad geometry by a given tolerance, and if requested this builder can adjust the node locations to put them back on to the underlying Cad geometry |
NXOpen.CAE.QueryCurveBuilder | Represents a NXOpen.CAE.QueryCurveBuilder |
NXOpen.CAE.ReassignElementsBuilder | Represents a NXOpen.CAE.ReassignElementsBuilder |
NXOpen.CAE.RemoveRibsBuilder | Represents a NXOpen.CAE.RemoveRibsBuilder |
NXOpen.CAE.ResponseSimulation.BaseBuilder | Represents the abstract builder class for all objects defined in response analysis meta solution |
NXOpen.CAE.ResponseSimulation.ExcitationBuilder | Represents the abstract excitation builder class |
NXOpen.CAE.ResponseSimulation.CSDExcitationBuilder | Represents the manager to NXOpen.CAE.ResponseSimulation.CSDExcitation |
NXOpen.CAE.ResponseSimulation.DDAMExcitationBuilder | Represents the manager to NXOpen.CAE.ResponseSimulation.DDAMExcitation |
NXOpen.CAE.ResponseSimulation.RotationalDDAMExcitationBuilder | Represents the manager to CAE.ResponseSimulation.DDAMExcitation |
NXOpen.CAE.ResponseSimulation.TranslationalDDAMExcitationBuilder | Represents the manager to CAE.ResponseSimulation.DDAMExcitation |
NXOpen.CAE.ResponseSimulation.DistributedLoadExcitationBuilder | Represents the manager to NXOpen.CAE.ResponseSimulation.DistributedLoadExcitation |
NXOpen.CAE.ResponseSimulation.NodalFunctionExcitationBuilder | Represents the manager to NXOpen.CAE.ResponseSimulation.NodalFunctionExcitation |
NXOpen.CAE.ResponseSimulation.RotationalNodalFunctionExcitationBuilder | Represents the manager to NXOpen.CAE.ResponseSimulation.RotationalNodalFunctionExcitation |
NXOpen.CAE.ResponseSimulation.TranslationalNodalFunctionExcitationBuilder | Represents the manager to NXOpen.CAE.ResponseSimulation.TranslationalNodalFunctionExcitation |
NXOpen.CAE.ResponseSimulation.StaticLoadExcitationBuilder | Represents the manager to NXOpen.CAE.ResponseSimulation.StaticLoadExcitation |
NXOpen.CAE.ResponseSimulation.VelocityImpactExcitationBuilder | Represents a NXOpen.CAE.ResponseSimulation.VelocityImpactExcitationBuilder |
NXOpen.CAE.ResponseSimulation.RSEventBuilder | Represents the manager of CAE |
NXOpen.CAE.ResponseSimulation.SensorBuilder | Represents a NXOpen.CAE.ResponseSimulation.SensorBuilder |
NXOpen.CAE.ResponseSimulation.SolutionBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.Solution class |
NXOpen.CAE.ResponseSimulation.StrainGageBuilder | Represents a StrainGageBuilder |
NXOpen.CAE.ResponseSimulation.DynamicResultEvaluationSettingBuilder | Represents the abstract builder class of evaluation setting for all dynamic results evaluations |
NXOpen.CAE.ResponseSimulation.PrlResultsEvaluationSettingBuilder | Represents the abstract builder class of evaluation setting for peak value, RMS results and LCR results |
NXOpen.CAE.ResponseSimulation.PeakValueEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.PeakValueEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.RmsResultsEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.RmsResultsEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.LcrResultsEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.LcrResultsEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.ResponseResultsEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.ResponseResultsEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.StrengthResultsEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.StrengthResultsEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.EvaluationSettingBuilder | Represents the abstract builder class of all evaluation setting classes |
NXOpen.CAE.ResponseSimulation.FunctionEvaluationSettingBuilder | Represents the abstract builder class of evaluation setting for function response evaluation |
NXOpen.CAE.ResponseSimulation.CsdEvaluationSettingBuilder | Represents the CSD build |
NXOpen.CAE.ResponseSimulation.ElementalFunctionEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.ElementalFunctionEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.ModalResultsEvaluationSettingBuilder | Represents the abstract builder class of evaluation setting for FRF and transmissibility |
NXOpen.CAE.ResponseSimulation.FrfEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.FrfEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.TransmissibilityEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.TransmissibilityEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.NodalFunctionEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.NodalFunctionEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.SensorEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.SensorEvaluationSetting class |
NXOpen.CAE.ResponseSimulation.StrainGageEvaluationSettingBuilder | This is a manager to the NXOpen.CAE.ResponseSimulation.StrainGageEvaluationSetting class |
NXOpen.CAE.ResultProbeBuilder | Result probe Builder |
NXOpen.CAE.ResultsManipulationBuilder | Represents an abstract NXOpen.CAE.ResultsManipulationBuilder |
NXOpen.CAE.ResultsCombinationBuilder | Represents a NXOpen.CAE.ResultsCombinationBuilder |
NXOpen.CAE.ResultsEnvelopeBuilder | Represents a NXOpen.CAE.ResultsEnvelopeBuilder |
NXOpen.CAE.ResultsModelExportBuilder | Represents a NXOpen.CAE.ResultsModelExportBuilder |
NXOpen.CAE.ResultsReductionBuilder | Represents a NXOpen.CAE.ResultsReductionBuilder |
NXOpen.CAE.TransientResultsReductionBuilder | Represents a NXOpen.CAE.TransientResultsReductionBuilder |
NXOpen.CAE.RigidEADBuilder | This class provides Rigid Associated Data Support |
NXOpen.CAE.SelectElementsBuilder | Represents a NXOpen.CAE.SelectElementsBuilder |
NXOpen.CAE.ShapeMetricViewerBuilder | Represents the correlation Shape metrics viewer builder |
NXOpen.CAE.Shell2SolidBuilder | Represents 3D Tet Mesh * Used to create a CAE.Mesh3d |
NXOpen.CAE.ShellTo3dHybridBuilder | Represents 3D Shell To Hybrid mesh * Used to create a CAE.Mesh3d |
NXOpen.CAE.ShellEADBuilder | This class provides Shell Associated Data Support |
NXOpen.CAE.ShipMeshAutomationBuilder | Represents Ship Mesh Automation * Used to create a NXOpen.CAE.ShipMeshAutomation |
NXOpen.CAE.ShowAdjacentBuilder | Represents a NXOpen.CAE.ShowAdjacentBuilder |
NXOpen.CAE.ShowHideBuilder | Represents a NXOpen.CAE.ShowHideBuilder |
NXOpen.CAE.ShowOnlyBuilder | Represents a NXOpen.CAE.ShowOnlyBuilder |
NXOpen.CAE.SimBcPlotContoursBuilder | Represents a NXOpen.CAE.SimBcPlotContoursBuilder builder which can be used to generate a plot of a NXOpen.CAE.SimBC in the graphics area |
NXOpen.CAE.SimBcXyPlotBuilder | Represents a NXOpen.CAE.SimBcXyPlotBuilder builder which can be used to generate a XY plot of a NXOpen.CAE.SimBC in the graphics area |
NXOpen.CAE.SimConstraintSetBuilder | Represents a CAE.SimConstraintSetBuilder builder |
NXOpen.CAE.SimLoadSetBuilder | Represents a NXOpen.CAE.SimLoadSetBuilder builder |
NXOpen.CAE.SimMotionLoadsBuilder | Represents a NXOpen.CAE.SimMotionLoadsBuilder |
NXOpen.CAE.SmoothOptResultsBuilder | This builder is meant for optimization results related to material density |
NXOpen.CAE.SolidPropertyCheckBuilder | Represents a NXOpen.CAE.SolidPropertyCheckBuilder |
NXOpen.CAE.SpiderElementBuilder | Represents a NXOpen.CAE.SpiderElementBuilder |
NXOpen.CAE.SpringEADBuilder | This class provides Spring Associated Data Support |
NXOpen.CAE.SuppressHoleBuilder | Builder for creating Hole Suppression Hole |
NXOpen.CAE.SurfaceCoatBuilder | Builder for creating Surface Coat |
NXOpen.CAE.SwapDiagonalBuilder | Represents a NXOpen.CAE.SwapDiagonalBuilder |
NXOpen.CAE.SweepBetweenMeshBuilder | Builder for creating swept mesh between faces |
NXOpen.CAE.ThickenMeshBuilder | Represents a NXOpen.CAE.ThickenMeshBuilder |
NXOpen.CAE.ThicknessBuilder | Represents a NXOpen.CAE.ThicknessBuilder |
NXOpen.CAE.ThicknessPlotContoursBuilder | Represents a NXOpen.CAE.ThicknessPlotContoursBuilder builder which can be used to generate a plot of a NXOpen.CAE.SimBC in the graphics area |
NXOpen.CAE.UnStitchEdgeBuilder | Represents a NXOpen.CAE.UnStitchEdgeBuilder |
NXOpen.CAE.ViewLaminateBuilder | Represents a View Laminate Builder |
NXOpen.CAE.WeldBuilder | Represents a NXOpen.CAE.WeldBuilder |
NXOpen.CAM.BladeCutLevels | Represents a Blade Cut Levels Builder |
NXOpen.CAM.BoundaryTurnBlank | Represents a NXOpen.CAM.BoundaryTurnBlank |
NXOpen.CAM.BoundaryTurnMemberCorner | Represents a NXOpen.CAM.BoundaryTurnMemberCorner |
NXOpen.CAM.BoundaryTurnMemberEvents | Represents a NXOpen.CAM.BoundaryTurnMemberEvents |
NXOpen.CAM.BoundaryTurnMemberFeed | Represents a NXOpen.CAM.BoundaryTurnMemberFeed |
NXOpen.CAM.BoundaryTurnMemberFineFinishCorner | Represents a NXOpen.CAM.BoundaryTurnMemberFineFinishCorner |
NXOpen.CAM.BoundaryTurnMemberFineFinishOffset | Represents a NXOpen.CAM.BoundaryTurnMemberFineFinishOffset |
NXOpen.CAM.BoundaryTurnMemberOffset | Represents a NXOpen.CAM.BoundaryTurnMemberOffset |
NXOpen.CAM.CollisionConfigurationBuilder | Represents a NXOpen.CAM.CollisionConfigurationBuilder |
NXOpen.CAM.CollisionPairBuilder | Represents a NXOpen.CAM.CollisionPairBuilder |
NXOpen.CAM.ConvertFromMCDBuilder | Represents a NXOpen.CAM.ConvertFromMCDBuilder |
NXOpen.CAM.CutDepthChecker | Represents a cut depth checker object |
NXOpen.CAM.DriveChainItemBuilder | Represents the Drive Chain Item Builder |
NXOpen.CAM.FeatureProcessBuilder | The Create Feature Process Builder class creates operations and features groups |
NXOpen.CAM.FeatureRecognitionBuilder | Represents a FeatureRecognition Builder |
NXOpen.CAM.FeatureTeaching | Represents a FeatureTeaching Builder |
NXOpen.CAM.FeedsOptimizeBuilder | Represents a NXOpen.CAM.FeedsOptimizeBuilder a "commit" of this object will perform the Feed Rate Optimization |
NXOpen.CAM.GeneralPropertiesBuilder | Represents a NXOpen.CAM.GeneralPropertiesBuilder to be used for setting the name of a specified CAM object |
NXOpen.CAM.GougeCheckBuilder | Represents a NXOpen.CAM.GougeCheckBuilder |
NXOpen.CAM.GroupFeatures | Represents the group features command |
NXOpen.CAM.HoldingSystemBuilder | Represents a NXOpen.CAM.HoldingSystemBuilder |
NXOpen.CAM.InspectionAnalyzeBuilder | Inspection Analyze options dialog builder |
NXOpen.CAM.InspectionAnalyzeOutputBuilder | Inspection Analyze Output options dialog builder |
NXOpen.CAM.InspectionCollisionAvoidanceBuilder | Collision Avoidance Dialog builder |
NXOpen.CAM.InspectionCreatePathsBuilder | Create Paths Dialog builder |
NXOpen.CAM.InspectionDeleteMeaPtsBuilder | Inspection Delete Analyze Points dialog builder |
NXOpen.CAM.InspectionGraphicalReportOutputBuilder | Represents the builder for Inspection Graphical Report Output |
NXOpen.CAM.InspectionImportDmisBuilder | Inspection Import Dmis dialog builder |
NXOpen.CAM.InspectionLinkPmiBuilder | Create Link PMI Dialog Builder |
NXOpen.CAM.InspectionMeasDataBuilder | Inspection Measured Data dialog builder |
NXOpen.CAM.InspectionMoveBuilder | Represents CMM Inspection Move Builder |
NXOpen.CAM.InspectionDeltaMoveBuilder | Represents the builder for the CMM Inspection sub-operation Delta Move |
NXOpen.CAM.InspectionLinear5axisMoveToPointBuilder | Represents the builder for the CMM Inspection sub-operation Linear 5axis Move To Point |
NXOpen.CAM.InspectionLinearMoveToPointBuilder | Represents the builder for the CMM Inspection sub-operation Linear Move To Point |
NXOpen.CAM.InspectionMeasurePointBuilder | Represents the builder for the CMM Inspection sub-operation Measure Point |
NXOpen.CAM.InspectionPolarGridBuilder | Represents the builder for the CMM Inspection Polar Grid sub-operation |
NXOpen.CAM.InspectionScanArcBuilder | Represents the builder for the CMM Inspection sub-operation Scan Arc |
NXOpen.CAM.InspectionScanCurve5AxisBuilder | Represents the builder for the CMM Inspection sub-operation Scan Curve |
NXOpen.CAM.InspectionScanCurveBuilder | Represents the builder for the CMM Inspection sub-operation Scan Curve |
NXOpen.CAM.InspectionScanHelixBuilder | Represents the builder for the CMM Inspection sub-operation Scan Helix |
NXOpen.CAM.InspectionScanLineBuilder | Represents the builder for the CMM Inspection sub-operation Scan Line |
NXOpen.CAM.InspectionUVGridBuilder | Represents the builder for the CMM Inspection UV Grid sub-operation |
NXOpen.CAM.InspectionOperationTransformBuilder | Create transformed inspection operations, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is not stable |
NXOpen.CAM.InspectionSaveToLayerBuilder | Inspection Analyze Save to Layer dialog builder |
NXOpen.CAM.InspectionSensorMassEditBuilder | Edit Multiple Subops Dialog builder |
NXOpen.CAM.IpwAnalysisBuilder | Represents a NXOpen.CAM.IpwAnalysisBuilder |
NXOpen.CAM.IpwContainmentCurvesBuilder | Represents a NXOpen.CAM.IpwContainmentCurvesBuilder |
NXOpen.CAM.ManageToolPartBuilder | Represents an Export Tool Part Builder |
NXOpen.CAM.ManualFeatureBuilder | Represents a NXOpen.CAM.ManualFeatureBuilder |
NXOpen.CAM.MirrorBuilder | Represents a Mirror Builder |
NXOpen.CAM.MoveBuilder | Represents Move Builder |
NXOpen.CAM.AlongMachineAxisMoveBuilder | Represents Along MCS Axis Move Builder |
NXOpen.CAM.AlongMcsAxisMoveBuilder | Represents Along MCS Axis Move Builder |
NXOpen.CAM.AlongToolAxisMoveBuilder | Represents the Move To Point Builder |
NXOpen.CAM.CircularAboutAxisMoveBuilder | Represents the Circular Move To Point Builder |
NXOpen.CAM.DeltaMoveBuilder | Represents the Delta Move Builder |
NXOpen.CAM.FollowGeometryMoveBuilder | Represents the Follow Geometry Move Builder |
NXOpen.CAM.FollowCurveMoveBuilder | Represents the Follow Curve Move Builder |
NXOpen.CAM.FollowPartMoveBuilder | Represents the Follow Part Move Builder |
NXOpen.CAM.LaserCircleCutout | Represents a LaserCircleCutout |
NXOpen.CAM.LaserHexagonCutout | Represents a LaserHexagonCutout |
NXOpen.CAM.LaserLinearMove | Represents a LaserLinearMove |
NXOpen.CAM.LaserProfileMove | Represents a LaserProfileMove |
NXOpen.CAM.LaserRectangleCutout | Represents a LaserRectangleCutout |
NXOpen.CAM.LaserSlotCutout | Represents a LaserSlotCutout |
NXOpen.CAM.MoveToPointBuilder | Represents the Move To Point Builder |
NXOpen.CAM.NormalToToolAxisMoveBuilder | Represents the Move To Point Builder |
NXOpen.CAM.ProbeCalibrateLengthMoveBuilder | Represents the Probe Calibrate Length Move Builder |
NXOpen.CAM.ProbeCalibrateSphereMoveBuilder | Represents the Probe Calibrate Sphere Move Builder |
NXOpen.CAM.ProbeCalibrateStylusMoveBuilder | Represents the Probe Calibrate Stylus Move Builder |
NXOpen.CAM.ProbeClearanceMoveBuilder | Represents the Probe Clearance Move Builder |
NXOpen.CAM.ProbeInspectBorebossMoveBuilder | Represents the Probe Inspect Bore Boss Move Builder |
NXOpen.CAM.ProbeInspectPointMoveBuilder | Represents the Probe Inspect Point Move Builder |
NXOpen.CAM.ProbeInspectSurfacePointMoveBuilder | Represents the Probe Inspect Surface Point Move Builder |
NXOpen.CAM.RotaryPointMoveBuilder | represents the Rotary Move To Point Builder |
NXOpen.CAM.RotaryPolarMoveBuilder | Represents the Rotary Polar Builder |
NXOpen.CAM.RotateToolMoveBuilder | Represents the Rotate Tool Move Builder |
NXOpen.CAM.TeachmodeEngageSettingsBuilder | Represents a TeachmodeEngageSettingsBuilder |
NXOpen.CAM.TeachmodeLinearMoveBuilder | Represents a TeachmodeLinearMove |
NXOpen.CAM.TeachmodeProfileMoveBuilder | Represents a TeachmodeProfileMoveBuilder |
NXOpen.CAM.TeachmodeRetractSettingsBuilder | Represents a TeachmodeRetractSettings builder |
NXOpen.CAM.ToolTrackingPointBuilder | Represents the Tool Tracking Point Builder |
NXOpen.CAM.TurnMoveToPointBuilder | Represents the Move To Point Builder |
NXOpen.CAM.TurnProbeClearanceBuilder | Represents an probe start of engage Builder |
NXOpen.CAM.TurnProbeInspectPointMoveBuilder | Represents the Turn Probe Inspect Point Move Builder |
NXOpen.CAM.UdeMoveBuilder | Represents the Ude Move Builder |
NXOpen.CAM.UserDefinedMoveBuilder | Represents the User Defined Move Builder |
NXOpen.CAM.VectorDistanceMoveBuilder | Represents the Vector Distance Move Builder |
NXOpen.CAM.MultipleStepoverBuilder | Represents a Builder which holds the data for a set of individual number of passes and stepover distance |
NXOpen.CAM.NCAssistantBuilder | Represents a NCAssistant Builder |
NXOpen.CAM.NcmctPartMountingBuilder | Represents a NXOpen.CAM.NcmctPartMountingBuilder a "commit" of this object will perform the Part Mounting and no object is returned |
NXOpen.CAM.ObjectNotes | Represents an Object Notes |
NXOpen.CAM.ObjectsFeedsBuilder | Represents an Object Action Feeds Builder |
NXOpen.CAM.ObjectsUdeSet | Represents an Object Action Ude Set Builder |
NXOpen.CAM.ObjectWorkInstructionBuilder | Represents an Object Work Instruction |
NXOpen.CAM.OperationTeaching | Represents a OperationTeaching Builder |
NXOpen.CAM.OperationTransformBuilder | OperationTransformBuilder |
NXOpen.CAM.ParamBuilder | Represents a manufacturing object builder |
NXOpen.CAM.DPMItpBuilder | Represents an DPMItp Builder |
NXOpen.CAM.NCGroupBuilder | Represents a NCGroup Builder |
NXOpen.CAM.FeatureGeomBuilder | Represents a FeatureGeom Builder |
NXOpen.CAM.DrillGeomBuilder | Represents a DrillGeom Builder |
NXOpen.CAM.FeatureBasedGeomBuilder | Represents a FeatureBasedGeom Builder |
NXOpen.CAM.FeatureGroupBuilder | Represents a FeatureBasedGeom Builder |
NXOpen.CAM.HoleBossGeometry | Represents a CAM geometry builder |
NXOpen.CAM.MillBoundaryGeomBuilder | Represents a MillBoundaryGeom Builder |
NXOpen.CAM.MillGeomBuilder | Represents a MillGeom Builder |
NXOpen.CAM.MillAreaGeomBuilder | Represents a MillAreaGeom Builder |
NXOpen.CAM.MillVolumeGeomBuilder | Represents a MillVolumeGeom Builder |
NXOpen.CAM.MillTextGeomBuilder | Represents a MillTextGeom Builder |
NXOpen.CAM.MultiBladeGeomBuilder | Represents a MultiBladeGeomBuilder Builder |
NXOpen.CAM.RotaryFinishGeomBuilder | Represents a rotary finish geometry builder |
NXOpen.CAM.TurnAvoidanceGeomBuilder | Represents a TurnAvoidanceGeom Builder |
NXOpen.CAM.TurnBoundaryGeomBuilder | Represents a TurnBoundaryGeom Builder |
NXOpen.CAM.TurnFeatureGeomBuilder | Represents a TurnFeatureGeom Builder |
NXOpen.CAM.TurnGeomBuilder | Represents a TurnGeom Builder |
NXOpen.CAM.MachineGroupBuilder | Represents a MachineGroup Builder |
NXOpen.CAM.MachineHeadGroupBuilder | Represents a MachineHeadGroup Builder |
NXOpen.CAM.MachinePocketGroupBuilder | Represents a MachinePocketGroup Builder |
NXOpen.CAM.MachineTurretGroupBuilder | Represents a MachineTurretGroup Builder |
NXOpen.CAM.MethodBuilder | Represents a Method Builder |
NXOpen.CAM.DrillMethodBuilder | Represents a Drill Method Builder |
NXOpen.CAM.InspectionMethodBuilder | Represents the builder for a CMM Inspection method |
NXOpen.CAM.LaserMethod | Represents a Laser Method |
NXOpen.CAM.MillMethodBuilder | Represents a Mill Method Builder |
NXOpen.CAM.TurnMethodBuilder | Represents a Turn Method Builder |
NXOpen.CAM.WedmMethodBuilder | Represents a Wedm Method Builder |
NXOpen.CAM.MultiToolBuilder | Represents a MultiTool Builder |
NXOpen.CAM.OptimizeTraverseGroupBuilder | Represents a OptimizeTraverseGroup Builder |
NXOpen.CAM.OrientGeomBuilder | Represents a OrientGeom Builder |
NXOpen.CAM.MillOrientGeomBuilder | Represents a MillOrientGeom Builder |
NXOpen.CAM.TurnOrientGeomBuilder | Represents a TurnOrientGeom Builder |
NXOpen.CAM.WedmOrientGeomBuilder | Represents a WedmOrientGeom Builder |
NXOpen.CAM.ProgramOrderGroupBuilder | Represents a ProgramOrderGroup Builder |
NXOpen.CAM.ToolBuilder | Represents a Tool Builder |
NXOpen.CAM.MillingToolBuilder | Represents a MillingTool Builder |
NXOpen.CAM.BarrelToolBuilder | Represents a BarrelTool Builder |
NXOpen.CAM.DrillToolBuilder | Represents a drill Tool Builder |
NXOpen.CAM.DrillBackCountersinkTool | Represents a Drill Back Countersink Tool Builder |
NXOpen.CAM.DrillBackSpotfacingToolBuilder | Represents a drill back spotfacing Tool Builder |
NXOpen.CAM.DrillBoreToolBuilder | Represents a drill bore Tool Builder |
NXOpen.CAM.DrillBoringBarTool | Represents a new Boring Bar Tool Builder |
NXOpen.CAM.DrillChamferBoringBarTool | Represents a Chamfer Boring Bar Tool Builder |
NXOpen.CAM.DrillBurnishingToolBuilder | Represents a drill burnishing Tool Builder |
NXOpen.CAM.DrillCenterBellToolBuilder | Represents a Drill Center Bell Tool Builder |
NXOpen.CAM.DrillCoreToolBuilder | Represents a drill core Tool Builder |
NXOpen.CAM.DrillCounterboreToolBuilder | Represents a drill counterbore Tool Builder |
NXOpen.CAM.DrillCtskToolBuilder | Represents a Drill Ctsk Tool Builder |
NXOpen.CAM.DrillReamerToolBuilder | Represents a drill Tool Builder |
NXOpen.CAM.DrillSpotdrillToolBuilder | Represents a drill spotdrill Tool Builder |
NXOpen.CAM.DrillSpotfaceToolBuilder | Represents a drill spotface tool Builder |
NXOpen.CAM.DrillStdToolBuilder | Represents a drill std Tool Builder |
NXOpen.CAM.DrillStepToolBuilder | Represents a drill step Tool Builder |
NXOpen.CAM.DrillTapToolBuilder | Represents a drill tap Tool Builder |
NXOpen.CAM.DrillThreadMillToolBuilder | Represents a drill thread mill Tool Builder |
NXOpen.CAM.MillFormToolBuilder | Represents a MillForm Tool Builder |
NXOpen.CAM.MillToolBuilder | Represents a Mill Tool Builder |
NXOpen.CAM.TToolBuilder | Represents a T Tool Builder |
NXOpen.CAM.SoftTool | Represents a SoftTool |
NXOpen.CAM.LaserTool | Represents a Laser Tool |
NXOpen.CAM.SolidToolBuilder | Represents a SolidTool Builder |
NXOpen.CAM.GenericToolBuilder | Represents a Generic Tool Builder |
NXOpen.CAM.InspectionProbeToolBuilder | Represents an Inspection Probe Tool Builder |
NXOpen.CAM.ProbeToolBuilder | Represents a Probe Tool Builder |
NXOpen.CAM.TurningToolBuilder | Represents a Turning tool builder |
NXOpen.CAM.FormToolBuilder | Represents a Form tool builder |
NXOpen.CAM.GrooveToolBuilder | Represents a Groove tool builder |
NXOpen.CAM.ThreadToolBuilder | Represents a Thread tool builder |
NXOpen.CAM.TurnToolBuilder | Represents a Turn tool builder |
NXOpen.CAM.WireTool | Represents a Wire Tool |
NXOpen.CAM.WedmGeomBuilder | Represents a WedmGeom Builder |
NXOpen.CAM.OperationBuilder | Represents a Opr Builder |
NXOpen.CAM.DocumentationBuilder | Represents a Documentation Builder |
NXOpen.CAM.GmcOpBuilder | Represents a GmcOp Builder |
NXOpen.CAM.HoleMachiningBuilder | Represents a HoleMachiningBuilder Builder |
NXOpen.CAM.ChamferMillingBuilder | Represents a ChamferMillingBuilder Builder |
NXOpen.CAM.CylindricalMillingBuilder | Represents a CylindricalMilling Builder |
NXOpen.CAM.CylinderMillingBuilder | Represents a CylinderMillingBuilder Builder |
NXOpen.CAM.RadialGrooveMillingBuilder | Represents a RadialGrooveMilling Builder |
NXOpen.CAM.ThreadMillingBuilder | Represents a ThreadMilling Builder |
NXOpen.CAM.HoleDrillingBuilder | Represents a HoleDrillingBuilder Builder |
NXOpen.CAM.HoleMakingBuilder | Represents a HoleMaking Builder |
NXOpen.CAM.InspectionAlignmentAssistantBuilder | Represents a CMM Inspection Alignment Assistant Builder, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is not stable |
NXOpen.CAM.InspectionAlignmentBuilder | Represents a CMM Inspection Alignment builder |
NXOpen.CAM.InspectionArcFeatureBuilder | Represents a CMM Inspection Arc Feature builder |
NXOpen.CAM.InspectionCircleFeatureBuilder | Represents a CMM Inspection Circle Feature builder |
NXOpen.CAM.InspectionCmmCommandBuilder | Represents a CMM Inspection miscellaneous command builder |
NXOpen.CAM.InspectionConeFeatureBuilder | Represents a CMM Inspection Cone Feature builder |
NXOpen.CAM.InspectionConstructedFeatureBuilder | Represents a CMM Inspection Constructed Feature Builder |
NXOpen.CAM.InspectionCparlnFeatureBuilder | Represents a CMM Inspection Cparln Feature Builder |
NXOpen.CAM.InspectionCurveFeatureBuilder | Represents a CMM Inspection Curve Feature builder |
NXOpen.CAM.InspectionCylinderFeatureBuilder | Represents a CMM Inspection Cylinder Feature builder |
NXOpen.CAM.InspectionEdgePointFeatureBuilder | Represents a CMM Inspection Edge Point Feature builder |
NXOpen.CAM.InspectionGraphicalReportBuilder | Represents the builder for the CMM Inspection Graphical Report Operation |
NXOpen.CAM.InspectionLineFeatureBuilder | Represents a CMM Inspection Line Feature builder |
NXOpen.CAM.InspectionOutputOperationBuilder | this class creates the output operation |
NXOpen.CAM.InspectionParplnFeatureBuilder | Represents a CMM Inspection Parpln Feature Builder |
NXOpen.CAM.InspectionPathBuilder | Represents the builder for a CMM Inspection path |
NXOpen.CAM.InspectionPatternFeatureBuilder | Represents a CMM Inspection Pattern Feature builder |
NXOpen.CAM.InspectionPlaneFeatureBuilder | Represents a CMM Inspection Plane Feature builder |
NXOpen.CAM.InspectionPointFeatureBuilder | Represents a CMM Inspection Point Feature builder |
NXOpen.CAM.InspectionSensorBuilder | Represents the builder for a CMM Inspection Sensor |
NXOpen.CAM.InspectionSphereFeatureBuilder | Represents a CMM inspection sphere feature builder |
NXOpen.CAM.InspectionSurfaceFeatureBuilder | Represents a CMM Inspection Curve Feature builder |
NXOpen.CAM.InspectionToleranceOperationBuilder | this class creates the tolerance operation |
NXOpen.CAM.InspectionTorusFeatureBuilder | Represents a CMM Inspection Torus Feature builder |
NXOpen.CAM.LaserTeachMode | Represents a Laser TeachMode |
NXOpen.CAM.LatheMachineControlBuilder | Represents a LatheMachineControl Builder |
NXOpen.CAM.ManualControlBuilder | Represents a ManualControl Operation Builder |
NXOpen.CAM.MillMachineControlBuilder | Represents a MillMachineControl Builder |
NXOpen.CAM.MillOperationBuilder | Represents a MillOperation Builder |
NXOpen.CAM.PlanarOperationBuilder | Represents a PlanarOperation Builder |
NXOpen.CAM.CavityMillingBuilder | Represents a CavityMilling Builder |
NXOpen.CAM.FaceMillingBuilder | Represents a FaceMilling Builder |
NXOpen.CAM.VolumeBased25DMillingOperationBuilder | Represents a VolumeBased25DMillingOperation Builder |
NXOpen.CAM.GrooveMillingBuilder | Represents a GrooveMillingBuilder |
NXOpen.CAM.FeatureMillingBuilder | Represents a FeatureMilling Builder |
NXOpen.CAM.PlanarMillingBuilder | Represents a PlanarMilling Builder |
NXOpen.CAM.EngravingBuilder | Represents a Engraving Builder |
NXOpen.CAM.PlungeMillingBuilder | Represents a PlungeMilling Builder |
NXOpen.CAM.VazlMillingBuilder | Represents a VazlMilling Builder |
NXOpen.CAM.ZLevelMillingBuilder | Represents a ZLevelMilling Builder |
NXOpen.CAM.PointToPointBuilder | Represents a Point to Point Builder (Drilling) |
NXOpen.CAM.SurfaceContourBuilder | Represents a SurfaceContour Builder |
NXOpen.CAM.MillToolProbingBuilder | Represents a Mill Tool Probing Builder |
NXOpen.CAM.TurningOperationBuilder | Represents a Turning Operation Builder |
NXOpen.CAM.CenterlineDrillTurningBuilder | Represents a CenterlineDrillTurningBuilder |
NXOpen.CAM.RoughFinishTurningBuilder | Represents a RoughFinishTurning Builder |
NXOpen.CAM.FinishTurningBuilder | Represents a FinishTurning Builder |
NXOpen.CAM.RoughTurningBuilder | Represents a RoughTurning Builder |
NXOpen.CAM.TeachmodeTurningBuilder | Represents a TeachmodeTurningBuilder |
NXOpen.CAM.ThreadTurningBuilder | Represents a ThreadTurning Builder |
NXOpen.CAM.TurnPartProbingBuilder | Represents a Turn Part Probing Builder |
NXOpen.CAM.TurnToolProbingBuilder | Represents a Turn tool probing Builder |
NXOpen.CAM.UserDefinedOprBuilder | Represents a UserDefinedOpr Builder |
NXOpen.CAM.LatheUserDefinedBuilder | Represents a LatheUserDefined Builder |
NXOpen.CAM.MillUserDefinedBuilder | Represents a MillUserDefined Builder |
NXOpen.CAM.WedmUserDefinedBuilder | Represents a WedmUserDefined Builder |
NXOpen.CAM.WedmMachineControlBuilder | Represents a WedmMachineControl Builder |
NXOpen.CAM.WedmOperationBuilder | Represents a WedmOperation Builder |
NXOpen.CAM.WedmBasedGeomBuilder | Represents a WedmBasedGeom Builder |
NXOpen.CAM.WedmExtGeomBuilder | Represents a WedmExtGeom Builder |
NXOpen.CAM.WedmFeatureGeomBuilder | Represents a WedmFeatureGeom Builder |
NXOpen.CAM.WedmIntGeomBuilder | Represents a WedmIntGeom Builder |
NXOpen.CAM.WedmNocoreGeomBuilder | Represents a WedmNocoreGeom Builder |
NXOpen.CAM.WedmOpenGeomBuilder | Represents a WedmOpenGeom Builder |
NXOpen.CAM.WedmCornerControlBuilder | Represents a WedmCornerControl Builder |
NXOpen.CAM.WedmCuttingBuilder | Represents a WedmCutting Builder |
NXOpen.CAM.WedmLeadInOutBuilder | Represents a WedmLeadInOut Builder |
NXOpen.CAM.WedmMoveControlBuilder | Represents a WedmMoveControl Builder |
NXOpen.CAM.Preferences | Represents a cam preferences Builder |
NXOpen.CAM.PreprocessGeometryBuilder | Represents a Preprocess Geometry Builder |
NXOpen.CAM.SimulationOptionsBuilder | Represents a NXOpen.CAM.SimulationOptionsBuilder |
NXOpen.CAM.SplitSubopCommand | Represents an Split Subop Command Builder |
NXOpen.CAM.StockPerPassBuilder | Represents a Builder which holds the data for a set of individual stock per pass |
NXOpen.CAM.Teaching | Represents a Teaching Builder |
NXOpen.CAM.ToolPathDivideBuilder | Represents a Tool Path Divide Builder |
NXOpen.CAM.ToolPathEditorBuilder | Represents a Tool Path Editor Builder |
NXOpen.CAM.ToolPathSplitBuilder | Represents a Tool Path Split Builder |
NXOpen.CAM.ToolPathSplitItemBuilder | Represents a ToolPathSplitItem builder |
NXOpen.CAM.ToolPathSplitParametersBuilder | Represents the Divide Parameters |
NXOpen.CAM.ToolPathTiltAvoidance | Represents a Tool Path Tilt Avoidance Builder |
NXOpen.CAM.ToolPathTiltBuilder | Represents a Tool Path Tilt Builder |
NXOpen.CAM.ToolPathTiltClearance | Represents a Tool Path Tilt Clearance Builder |
NXOpen.CAM.ToolPathTiltMachine | Represents a Tool Path Tilt Machine Builder |
NXOpen.CAM.ToolPathTiltTilting | Represents a Tool Path Tilt Tilting Builder |
NXOpen.CAM.Topology | Represents a CAM topology builder |
NXOpen.CAM.TrackpointBuilder | Represents a Trackpoint Builder |
NXOpen.CAM.SolidTrackingBuilder | Represents a SolidTracking Builder |
NXOpen.CAM.GenericTrackingBuilder | Represents a GenericTracking Builder |
NXOpen.CAM.InspectionProbeTrackingBuilder | Represents a InspectionProbeTracking builder |
NXOpen.CAM.ProbeTrackingBuilder | Represents a ProbeTracking Builder |
NXOpen.CAM.WedmCustomBoundaryDataBuilder | Represents a WedmCustomBoundaryData Builder |
NXOpen.CAM.WedmCutOrderBuilder | Represents a NXOpen.CAM.WedmCutOrderBuilder |
NXOpen.CAM.WedmPointDefinitionBuilder | Represents a NXOpen.CAM.WedmPointDefinitionBuilder |
NXOpen.CAM.WorkInstructionBuilder | Represents the builder for Work Instruction |
NXOpen.CAM.WorkInstructionOutputBuilder | Represents the builder for Work Instruction Output |
NXOpen.Catiav4Creator | Represents a NXOpen.Catiav4Creator to be used when exporting the CATIA V4 Data This class is created using NXOpen.DexManager |
NXOpen.Catiav4Importer | Represents a NXOpen.Catiav4Importer to be used when importing the CATIA V4 Data This class is created using NXOpen.DexManager |
NXOpen.Catiav5Creator | Represents a NXOpen.Catiav5Creator to be used when exporting the CATIA V5 Data This class is created using NXOpen.DexManager |
NXOpen.Catiav5Importer | Represents a NXOpen.Catiav5Importer to be used when importing the CATIA V5 Data This class is created using NXOpen.DexManager |
NXOpen.CGMBuilder | Represents a NXOpen.CGMBuilder to be used when exporting the Current Display or drawing sheets to a CGM |
NXOpen.ConvertToFromReferenceBuilder | Represents a NXOpen.ConvertToFromReferenceBuilder |
NXOpen.DexBuilder | This is an abstract class that provides the basic functionality common to all dex builders |
NXOpen.DxfdwgCreator | Represents a NXOpen.DxfdwgCreator to be used when exporting the DXF/DWG Data This class is created using NXOpen.DexManager |
NXOpen.DxfdwgImporter | Represents a NXOpen.DxfdwgImporter to be used when importing the DXF/DWG Data This class is created using NXOpen.DexManager |
NXOpen.IgesCreator | Represents a NXOpen.IgesCreator to be used when exporting the IGES Data This class is created using NXOpen.DexManager |
NXOpen.IgesImporter | Represents a NXOpen.IgesImporter to be used when importing the IGES Data This class is created using NXOpen.DexManager |
NXOpen.NXTo2dCreator | Represents a NXOpen.NXTo2dCreator to be used when exporting the 2D Data This class is created using NXOpen.DexManager |
NXOpen.Step203Creator | Represents a NXOpen.Step203Creator to be used when exporting the STEP203 Data This class is created using NXOpen.DexManager |
NXOpen.Step203Importer | Represents a NXOpen.Step203Importer to be used when importing the STEP203 Data This class is created using NXOpen.DexManager |
NXOpen.Step214Creator | Represents a NXOpen.Step214Creator to be used when exporting the STEP214 Data This class is created using NXOpen.DexManager |
NXOpen.Step214Importer | Represents a NXOpen.Step214Importer to be used when importing the STEP214 Data This class is created using NXOpen.DexManager |
NXOpen.Step242Importer | Represents a NXOpen.Step242Importer to be used when importing STEP242 Data This class is created using NXOpen.DexManager |
NXOpen.StepCreator | Represents a NXOpen.StepCreator to be used when exporting the STEP Data This class is created using NXOpen.DexManager |
NXOpen.Diagramming.BaseObjectBuilder | Represents a BaseObjectBuilder |
NXOpen.Diagramming.SheetBuilder | Represents a SheetBuilder |
NXOpen.Diagramming.SheetElementBuilder | Represents a SheetElementBuilder |
NXOpen.Diagramming.ConnectableElementBuilder | Represents a ConnectableElementBuilder |
NXOpen.Diagramming.AnnotationBuilder | Represents a AnnotationBuilder |
NXOpen.Diagramming.Tables.TableBuilder | Represents a TableBuilder |
NXOpen.Diagramming.NodeBuilder | Represents a NodeBuilder |
NXOpen.Diagramming.ConnectionBuilder | Represents a ConnectionBuilder |
NXOpen.Diagramming.GroupBuilder | Represents a GroupBuilder |
NXOpen.Diagramming.LeaderLineBuilder | Represents a LeaderLineBuilder |
NXOpen.Diagramming.PortBuilder | Represents a PortBuilder |
NXOpen.Diagramming.ShapeBuilder | Represents a ShapeBuilder |
NXOpen.Diagramming.BulkEditBuilder | Represents a BulkEditBuilder to edit bulk of objects |
NXOpen.Diagramming.CannedAnnotationBuilder | Represents a CannedAnnotationBuilder |
NXOpen.Diagramming.DefineTitleBlockBuilder | Represents a NXOpen.Diagramming.DefineTitleBlockBuilder builder |
NXOpen.Diagramming.PopulateTitleBlockBuilder | Represents a NXOpen.Diagramming.PopulateTitleBlockBuilder builder |
NXOpen.Diagramming.SheetBordersAndZonesBuilder | The SheetBordersAndZones builder |
NXOpen.Die.AddendumSectionUserDefinedBuilder | Represents a NXOpen.Die.AddendumSectionUserDefinedBuilder builder used to select a previously defined section or a string of objects to define the section shape |
NXOpen.Die.UncutRegionsBuilder | Calculates the uncut regions of a curve given a radius value for the cut tool |
NXOpen.Display.Background | Represents a NXOpen.Display.Background Background defines how background pixels are displayed |
NXOpen.Display.CameraBuilder | Represents a NXOpen.Display.CameraBuilder |
NXOpen.Display.CgfxAttributeValueColor3Builder | Represents a NXOpen.Display.CgfxAttributeValueColor3Builder builder |
NXOpen.Display.CgfxAttributeValueColor4Builder | Represents a NXOpen.Display.CgfxAttributeValueColor4Builder builder |
NXOpen.Display.CgfxAttributeValueFileBuilder | Represents a NXOpen.Display.CgfxAttributeValueFileBuilder builder |
NXOpen.Display.CgfxAttributeValueFloat3Builder | Represents a NXOpen.Display.CgfxAttributeValueFloat3Builder builder |
NXOpen.Display.CgfxAttributeValueFloat4Builder | Represents a NXOpen.Display.CgfxAttributeValueFloat4Builder builder |
NXOpen.Display.CgfxAttributeValueIntegerBuilder | Represents a NXOpen.Display.CgfxAttributeValueIntegerBuilder builder |
NXOpen.Display.CgfxAttributeValueNumberBuilder | Represents a NXOpen.Display.CgfxAttributeValueNumberBuilder builder |
NXOpen.Display.CgfxMattexBuilder | Represents a NXOpen.Display.CgfxMattex builder |
NXOpen.Display.DecalBuilder | Represents a NXOpen.Display.DecalBuilder |
NXOpen.Display.DynamicSectionBuilder | Represents a Dynamic Section Builder used for creating sections |
NXOpen.Annotations.LightweightSectionBuilder | Represents a NXOpen.Annotations.LightweightSection builder |
NXOpen.Layout2d.CreateComponentFrom3DBuilder | Represents a Builder that creates NXOpen.Layout2d.Component from Assembly |
NXOpen.Display.EnvironmentBuilder | Represents a Display.EnvironmentBuilder This controls environment image, tone mapping, and stages |
NXOpen.Display.ExtractScene | Represents a NXOpen.Display.ExtractScene |
NXOpen.Display.FacetSettingsBuilder | Represents a NXOpen.Display.FacetSettingsBuilder |
NXOpen.Display.GlobalIlluminationBuilder | Represents a NXOpen.Display.GlobalIlluminationBuilder |
NXOpen.Display.GridBuilder | Represents the builder for adding a grid NXOpen.Display.Grid |
NXOpen.Display.BoundedGridBuilder | Represents the builder for creating a bounded grid NXOpen.Display.BoundedGrid |
NXOpen.Display.DatumPlaneGridBuilder | Represents the builder for adding a datum plane grid NXOpen.Display.DatumPlaneGrid to a datum plane |
NXOpen.Display.PlaneGridBuilder | Represents the builder for adding a bounded grid NXOpen.Display.PlaneGrid to a plane |
NXOpen.Display.Image | Represents a NXOpen.Display.Image |
NXOpen.Display.ImageBaseBuilder | Represents a NXOpen.Display.ImageBaseBuilder |
NXOpen.Display.RasterImageBuilder | Represents a NXOpen.Display.RasterImageBuilder |
NXOpen.Display.ImageBasedLighting | Represents a NXOpen.Display.ImageBasedLighting Image-based Lighting (IBL) is only performed in High Quality Image renderings |
NXOpen.Display.IrayPlusMaterialEditorBuilder | Represents a NXOpen.Display.IrayPlusMaterialEditorBuilder |
NXOpen.Display.IrayPlusSimpleMaterialEditorBuilder | Represents a NXOpen.Display.IrayPlusSimpleMaterialEditorBuilder |
NXOpen.Display.IRayPlusStudioEditorBuilder | Represents a NXOpen.Display.IRayPlusStudioEditorBuilder |
NXOpen.Display.LightBuilder | Represents a NXOpen.Display.LightBuilder |
NXOpen.Display.Lighting | Represents a NXOpen.Display.Lighting Lights are used to illuminate the scene in Shaded and Studio rendering styles, as well as in High Quality Images |
NXOpen.Display.NonProportionalZoom | Provides non-proportional zoom capability |
NXOpen.Display.PerspectiveOptionsBuilder | Represents a NXOpen.Display.PerspectiveOptionsBuilder |
NXOpen.Display.PlanarShipGridBuilder | Represents a NXOpen.Display.PlanarShipGrid builder |
NXOpen.Display.PointCloudBuilder | Represents a Display.PointCloudBuilder |
NXOpen.Display.RayTracedStudioBuilder | Represents a NXOpen.Display.RayTracedStudioBuilder |
NXOpen.Display.RayTracedStudioEditorBuilder | Represents a NXOpen.Display.RayTracedStudioEditorBuilder |
NXOpen.Display.Reflection | Represents a NXOpen.Display.Reflection Reflection defines the source of reflection in shiny objects for Studio rendering style or High Quality Images |
NXOpen.Display.SaveImageFileBrowserBuilder | Represents a NXOpen.Display.SaveImageFileBrowserBuilder |
NXOpen.Display.Scene | Represents a NXOpen.Display.Scene A scene is comprised of background, stage, reflection, lights and image-based lighting subobjects |
NXOpen.Display.SelPref | Represents a NXOpen.Display.SelPref |
NXOpen.Display.Shadows | Represents a NXOpen.Display.Shadows |
NXOpen.Display.Stage | Represents a NXOpen.Display.Stage A stage is an environment cube, a six-sided room, that can have between one and six visible walls |
NXOpen.Display.StudioImageCaptureBuilder | Represents a NXOpen.Display.StudioImageCaptureBuilder |
NXOpen.Display.TrueShadingBuilder | Represents a NXOpen.Display.TrueShading builder |
NXOpen.Display.TrueStudioBuilder | The TrueStudioBuillder manages Advanced Studio visualization display |
NXOpen.Display.Wall | Represents a NXOpen.Display.Wall |
NXOpen.Drafting.AnnotateViewsBuilder | This class is used to annotate views based on the knowledge fusion rules |
NXOpen.Drafting.AutomationPreferencesBuilder | the builder for Drafting Automation Preferences |
NXOpen.Drafting.BaseEditSettingsBuilder | Represents a NXOpen.Drafting.BaseEditSettingsBuilder |
NXOpen.Annotations.EditSettingsBuilder | the edit settings builder |
NXOpen.Annotations.TableEditSettingsBuilder | Represents a NXOpen.Annotations.TableEditSettingsBuilder |
NXOpen.Drawings.EditSectionLineSettingsBuilder | Represents a NXOpen.Drawings.EditSectionLineSettingsBuilder builder |
NXOpen.Drawings.EditViewLabelSettingsBuilder | Represents a NXOpen.Drawings.EditViewLabelSettingsBuilder builder |
NXOpen.Drawings.EditViewSettingsBuilder | Represents a NXOpen.Drawings.EditViewSettingsBuilder builder |
NXOpen.Layout2d.EditComponentSettingsBuilder | Represents a NXOpen.Layout2d.EditComponentSettingsBuilder builder |
NXOpen.Drafting.CutCopyPasteBuilder | Represents a paste in Drafting |
NXOpen.Drafting.DistributeAnnotationsBuilder | This class is used to distribute annotations associated to a view |
NXOpen.Drafting.DrawingCreationWizardBuilder | Represents a NXOpen.Drafting.DrawingCreationWizardBuilder |
NXOpen.Drafting.MoveToDrawingViewBuilder | This builder allows the user to extract contents from a sheet and transfer them to a new Drawing view, also provide some other options for view creation |
NXOpen.Drafting.PreferencesBuilder | Represents a NXOpen.Drafting.PreferencesBuilder builder |
NXOpen.Drafting.RulesBuilder | This class is used to specify knowledge fusion rules in a drawing template |
NXOpen.Drafting.SmashDrawingViewBuilder | This builder allows the user to break a Drawing View into its parts and delete the Drawing View |
NXOpen.Drafting.SpecifyRuleBuilder | This class is used to specify knowledge fusion rule for a note object in a drawing template |
NXOpen.Drawings.AddObjectsToRegionBuilder | Creates the builder for associating the symbols from library to the region |
NXOpen.Drawings.AddRemoveBoxViewBuilder | This class is used to construct the add remove box view Builder |
NXOpen.Drawings.BaseViewBuilder | Represents a NXOpen.Drawings.BaseView builder |
NXOpen.Drawings.BordersAndZonesBuilder | Builder for creating Borders and Zones |
NXOpen.Drawings.BrokenViewBuilder | This class is used to construct the broken view Builder |
NXOpen.Drawings.CompareReportBuilder | Represents a NXOpen.Drawings.CompareReportBuilder builder |
NXOpen.Drawings.ConvertDraftingContentsBuilder | Represents a Drawings.ConvertDraftingContentsBuilder |
NXOpen.Drawings.CustomViewSettingsBuilder | this class represents the "this class represents Drawings |
NXOpen.Drawings.DetailViewBuilder | Represents a NXOpen.Drawings.DetailView |
NXOpen.Drawings.DrawingCompareSettingsBuilder | Represents a NXOpen.Drawings.DrawingCompareSettingsBuilder builder |
NXOpen.Drawings.DrawingRegionBuilder | Represents a Drawing Region Builder |
NXOpen.Drawings.DrawingSheetBuilder | Represents a NXOpen.Drawings.DrawingSheetBuilder |
NXOpen.Drawings.DraftingDrawingSheetBuilder | Represents a Builder for creating NXOpen.Drawings.DraftingDrawingSheet s |
NXOpen.Layout2d.LayoutDrawingSheetBuilder | Represents a Builder for creating Layout2d.LayoutDrawingSheet s |
NXOpen.Layout2d.ConvertSheetToLayoutBuilder | Represents a Builder for converting a drawing sheet to Layout |
NXOpen.Drawings.DrawingsPropertiesBuilder | Represents an NXOpen.Drawings.DrawingsPropertiesBuilder to be used for marking the component as secondary geometry |
NXOpen.Drawings.DrawingViewBuilder | This builder allows the user to create a Drawing View |
NXOpen.Drawings.MarkAsTemplateBuilder | Represents a NXOpen.Drawings.MarkAsTemplateBuilder |
NXOpen.Drawings.ProjectedViewBuilder | Represents a NXOpen.Drawings.ProjectedView builder |
NXOpen.Drawings.RefineDisplayBuilder | Represents a NXOpen.Drawings.RefineDisplayBuilder |
NXOpen.Drawings.RemoveObjectsBuilder | Creates the builder for removing associated objects from the region |
NXOpen.Drawings.ReportBuilder | Represents a Drawings.ReportBuilder |
NXOpen.Drawings.SecondaryGeometryInViewsBuilder | This builder allows the user to select existing view(s) in which component objects can be designated as secondary or primary |
NXOpen.Drawings.SectionInViewBuilder | This builder allows the user to select a view in which component or solid body objects can be designated as section, non-sectioned, or neither |
NXOpen.Drawings.SectionLineBuilder | Represents a NXOpen.Drawings.SectionLineBuilder |
NXOpen.Drawings.SectionLineStyleBuilder | Represents a Drawings |
NXOpen.Drawings.SectionViewBuilder | Represents a NXOpen.Drawings.SectionView builder |
NXOpen.Drawings.SelectRegionBuilder | Creates the builder for associating the objects from the screen |
NXOpen.Drawings.SheetZoneReferenceBuilder | builder for creating sheet zone refernce control strings based on the selected attribute and view |
NXOpen.Drawings.SketchSectionLineBuilder | Represents a Drawings.SectionLine builder |
NXOpen.Drawings.StandardViewsBuilder | This builder allows the user to create a Drawing View |
NXOpen.Drawings.UpdateViewsBuilder | Represents a NXOpen.Drawings.UpdateViewsBuilder |
NXOpen.Drawings.ViewAlignmentBuilder | Represents a NXOpen.Drawings.ViewAlignmentBuilder |
NXOpen.Drawings.ViewCopyTo3dBuilder | Represents a NXOpen.Drawings.ViewCopyTo3dBuilder |
NXOpen.Drawings.ViewCreationWizardBuilder | This builder allows the user to create a Drawing View |
NXOpen.Drawings.ViewProjectionBuilder | Represents a NXOpen.Drawings.ViewProjectionBuilder |
NXOpen.EffectivityConditionBuilder | Represent a utility class to assign or edit discrete and range effectivity unit values in the context of a NXOpen.CollaborativeDesign |
NXOpen.Facet.AdjustMinimumRadiusBuilder | Represents a NXOpen.Facet.AdjustMinimumRadiusBuilder |
NXOpen.Facet.BestFitAlignBuilder | This class performs the best fit alignment between objects |
NXOpen.Facet.BridgeFacetBodyBuilder | Represents a NXOpen.Facet.BridgeFacetBodyBuilder It bridges two disjoint NX facet bodies |
NXOpen.Facet.CleanupFacetBodyBuilder | Represents a NXOpen.Facet.CleanupFacetBodyBuilder builder |
NXOpen.Facet.CombineFacetBodyBuilder | Represents a NXOpen.Facet.CombineFacetBodyBuilder builder |
NXOpen.Facet.ConvertFacetBodyBuilder | Represents a NXOpen.Facet.ConvertFacetBodyBuilder builder |
NXOpen.Facet.CreateTransitionBuilder | Represents a NXOpen.Facet.CreateTransitionBuilder builder |
NXOpen.Facet.CurvatureBuilder | Represents a NXOpen.Facet.CurvatureBuilder |
NXOpen.Facet.DecimateFacetBodyBuilder | Represents a NXOpen.Facet.DecimateFacetBodyBuilder |
NXOpen.Facet.DetectPrimitivesBuilder | This class manages the primitive shape detection for a facet body |
NXOpen.Facet.DivideFacetFaceBuilder | Represents a NXOpen.Facet.DivideFacetFaceBuilder |
NXOpen.Facet.ExtrudeFacetBodyBuilder | Represents a NXOpen.Facet.ExtrudeFacetBodyBuilder It extrudes a NX Facet Body |
NXOpen.Facet.ExtrudeProfileBuilder | Represents a NXOpen.Facet.ExtrudeProfileBuilder It extrudes 3D closed profile between planes |
NXOpen.Facet.FacetBodyFromBodyBuilder | Represents a NXOpen.Facet.FacetBodyFromBodyBuilder builder |
NXOpen.Facet.FeatureExtractionBuilder | Represents a NXOpen.Facet.FeatureExtractionBuilder It extracts feature lines or separates regions of different curvature from a facet body based on the curvature map |
NXOpen.Facet.FillHoleBuilder | This class finds and fills holes to a prescribed boundary smoothness condition |
NXOpen.Facet.LocalOffsetBuilder | Represents a NXOpen.Facet.LocalOffsetBuilder |
NXOpen.Facet.MergeFacetBodyBuilder | Represents a NXOpen.Facet.MergeFacetBodyBuilder It merges two overlapping NX facet bodies |
NXOpen.Facet.MergeFacetFacesBuilder | Represents a Facet.MergeFacetFacesBuilder builder |
NXOpen.Facet.MultiPatchAlignmentBuilder | Aligns multiple facet bodies to one another without using reference points |
NXOpen.Facet.PaintBrushBuilder | This class manages the paint brush utility for a facet body |
NXOpen.Facet.PaintFacetBodyBuilder | This class manages the color painting on a facet body |
NXOpen.Facet.PolygonModelingBuilder | Represents a NXOpen.Facet.PolygonModelingBuilder builder |
NXOpen.Facet.RemoveUndercutsBuilder | This class handles the removal of undercut regions of a facet body |
NXOpen.Facet.SewFacetBodyBuilder | Represents a NXOpen.Facet.SewFacetBodyBuilder It sews two touching NX facet bodies |
NXOpen.Facet.SmoothFacetBodyBuilder | Represents a NXOpen.Facet.SmoothFacetBodyBuilder |
NXOpen.Facet.SnipFacetBodyBuilder | Represents a SnipFacetBody builder |
NXOpen.Facet.STLImportBuilder | The STL file import builder |
NXOpen.Facet.SubdivideFacetBodyBuilder | This class provides functionality to subdivide the polygons to increase the density of the facet bodies |
NXOpen.FeatureGeneralPropertiesBuilder | Represents a NXOpen.FeatureGeneralPropertiesBuilder to be used for modifying the names of features and general objects |
NXOpen.Features.ColorFeatureBuilder | Represents a NXOpen.Features.ColorFeatureBuilder Represents a color feature builder |
NXOpen.Features.ColorFeatureGroupBuilder | Represents a NXOpen.Features.ColorFeatureGroupBuilder Represents a color feature group builder |
NXOpen.Features.CopyPasteBuilder | Represents a NXOpen.Features.CopyPasteBuilder |
NXOpen.Features.EditDimensionBuilder | Represents a builder of edit feature dimensions |
NXOpen.Features.EmbeddedOperationBuilder | Represents an EmbeddedOperationBuilder |
NXOpen.SketchProjectBuilder | Represents a NXOpen.SketchProjectBuilder builder |
NXOpen.Features.FeatureBuilder | Represents a Feature Builder to be used in the creation and modification of features |
NXOpen.BodyDes.OnestepUnformBuilder | Represents a NXOpen.BodyDes.OnestepUnformBuilder |
NXOpen.CAM.SurfaceRegions | Represents a Surface Regions Builder |
NXOpen.Die.AddendumSectionBuilder | Represents a NXOpen.Die.AddendumSectionBuilder which is used to create or edit an addendum section |
NXOpen.Die.AddSurfBuilder | Represents a NXOpen.Die.AddSurfBuilder builder |
NXOpen.Die.CastReliefBuilder | Represents a NXOpen.Die.CastReliefBuilder builder |
NXOpen.Die.CastReliefParentBuilder | Represents a Die Cast Relief sub feature |
NXOpen.Die.ClampingSlotBuilder | Represents a Clamping Slot feature builder |
NXOpen.Die.ClearanceBuilder | Represents a builder that is used to create or edit a NXOpen.Die.Clearance feature |
NXOpen.Die.CompensateRoughDataBuilder | Represents a NXOpen.Die.CompensateRoughDataBuilder |
NXOpen.Die.ConnectProfileParentBuilder | Represents a Die Connecting Profile sub feature |
NXOpen.Die.DeckParentBuilder | Represents a Die Deck Feature sub feature |
NXOpen.Die.DieShoeBuilder | Represents a Die Shoe feature builder |
NXOpen.Die.DrawBeadBuilder | Represents a builder that is used to create or edit a NXOpen.Die.DrawBead feature |
NXOpen.Die.DrawDiePunchBuilder | Represents a Draw Die Punch feature builder |
NXOpen.Die.DrawDiePunchSectionBuilder | Represents a Draw Die Punch Section sub feature |
NXOpen.Die.FaceSheetBuilder | Represents a Face Sheet feature |
NXOpen.Die.FillAreaBuilder | Represents a builder that is used to create or edit a NXOpen.Die.FillArea feature |
NXOpen.Die.FillBuilder | Represents an Area Fill feature |
NXOpen.Die.FingerClearanceNotchBuilder | Represents a builder that is used to create or edit a NXOpen.Die.FingerClearanceNotch feature |
NXOpen.Die.FlangeSteelRibChildBuilder | Represents a Die Flange Steel Rib Child sub feature |
NXOpen.Die.FlangeSteelRibParentBuilder | Represents a Die Flange Steel Rib Parent sub feature |
NXOpen.Die.FlangeTaskBuilder | Represents a Flange Task feature builder |
NXOpen.Die.FormTaskBuilder | Represents a Form Task feature builder |
NXOpen.Die.HandlingCoreBuilder | Represents a builder that is used to create or edit a NXOpen.Die.HandlingCore feature |
NXOpen.Die.HandlingCoreChildBuilder | Represents a Die Handling Core Child sub feature |
NXOpen.Die.HandlingCoreParentBuilder | Represents a Die Handling Core Parent sub feature |
NXOpen.Die.HeelpostBuilder | Represents a NXOpen.Die.HeelpostBuilder builder |
NXOpen.Die.HoleChildBuilder | Represents a Die Hole Child sub feature |
NXOpen.Die.HoleParentBuilder | Represents a Die Hole Parent sub feature |
NXOpen.Die.KeywayBuilder | Represents a NXOpen.Die.KeywayBuilder builder |
NXOpen.Die.KeywayChildBuilder | Represents a Die Keyway Child sub feature |
NXOpen.Die.KeywayParentBuilder | Represents a Die Keyway Parent sub feature |
NXOpen.Die.LineupBuilder | Represents a Lineup feature builder |
NXOpen.Die.MachineReliefBuilder | Represents a builder that is used to create or edit a NXOpen.Die.MachineRelief feature |
NXOpen.Die.OutputCurvesBuilder | Represents an output curves feature builder |
NXOpen.Die.PadChildBuilder | Represents a Die Pad Child sub feature |
NXOpen.Die.PadParentBuilder | Represents a Die Pad Parent sub feature |
NXOpen.Die.PierceHoleChildBuilder | Represents a Pierce Hole Child sub feature |
NXOpen.Die.PierceHoleParentBuilder | Represents a Pierce Hole Parent sub feature |
NXOpen.Die.PierceTaskBuilder | Represents a Pierce Task feature builder |
NXOpen.Die.PointChildBuilder | Represents a Die Point Child sub feature |
NXOpen.Die.PointParentBuilder | Represents a Die Point Parent sub feature |
NXOpen.Die.PressureSystemChildBuilder | Represents a Die Pressure System Child sub feature |
NXOpen.Die.PressureSystemParentBuilder | Represents a Die Pressure System Parent sub feature |
NXOpen.Die.QuickBinderBuilder | Represents a NXOpen.Die.QuickBinderBuilder builder which builds a developable binder sheet body by adding cones, cylinders, or planes to an approximated face |
NXOpen.Die.QuickBinderWrapBuilder | Represents a NXOpen.Die.QuickBinderWrapBuilder builder |
NXOpen.Die.RibChildBuilder | Represents a Die Rib Child sub feature |
NXOpen.Die.RibParentBuilder | Represents a Die Rib Parent sub feature |
NXOpen.Die.RotorBuilder | Represents a CAM Rotor feature builder |
NXOpen.Die.RotorSectionBuilder | Represents a Rotor Section sub feature |
NXOpen.Die.SpringbackCompensationBuilder | Used to create or edit a NXOpen.Die.SpringbackCompensation feature |
NXOpen.Die.SteelInsertBuilder | Represents a Steel Insert feature builder |
NXOpen.Die.SteelInsertSectionBuilder | Represents a Steel Insert Section sub feature |
NXOpen.Die.SteelInsertSegmentChildBuilder | Represents a Steel Insert Segment Child sub feature |
NXOpen.Die.SteelInsertSegmentParentBuilder | Represents a Steel Insert Segment Parent sub feature |
NXOpen.Die.ThroatChildBuilder | Represents a Die Throat Child sub feature |
NXOpen.Die.ThroatParentBuilder | Represents a Die Throat Parent sub feature |
NXOpen.Die.TrimFlangeDieAssistantBuilder | Represents a NXOpen.Die.TrimFlangeDieAssistantBuilder |
NXOpen.Die.TrimLineDevelopmentBuilder | Represents a NXOpen.Features.TrimLineDevelopment builder |
NXOpen.Die.TrimTaskBuilder | Represents a Trim Task feature builder |
NXOpen.Die.WearPlateLocChildBuilder | Represents a Die Wear Plate Locator sub feature |
NXOpen.Die.WearPlateLocParentBuilder | Represents a Die Wear Plate Locator sub feature |
NXOpen.Features.AdaptiveShellBuilder | Represents a NXOpen.Features.AdaptiveShell builder |
NXOpen.Features.AdmMoveFaceBuilder | Represents a NXOpen.Features.AdmMoveFace builder |
NXOpen.Features.AdmOffsetRegionBuilder | Represents a NXOpen.Features.AdmOffsetRegion builder |
NXOpen.Features.AdmResizeFaceBuilder | Represents a builder for a resize face feature |
NXOpen.Features.AeroFlangeBuilder | Represents a NXOpen.Features.AeroFlange builder |
NXOpen.Features.AeroRibBuilder | Represents a NXOpen.Features.AeroRib builder |
NXOpen.Features.AestheticFaceBlendBuilder | This class will provide ability to create aesthetically pleasing blend surfaces on sheet and solid bodies |
NXOpen.Features.AnalyzePocketBuilder | Represents a NXOpen.Features.AnalyzePocket builder for Analyze Pocket feature |
NXOpen.Features.AOCSBuilder | Represents a Offset In Face(aka Associative offset curve on face)feature builder |
NXOpen.Features.AssemblyCutBuilder | Represents a NXOpen.Features.AssemblyCut builder |
NXOpen.Features.AssociativeArcBuilder | Represents a NXOpen.Features.AssociativeArc builder |
NXOpen.Features.AssociativeLineBuilder | Represents a NXOpen.Features.AssociativeLine builder |
NXOpen.Features.BlendCornerBuilder | Represents a NXOpen.Features.BlendCorner builder |
NXOpen.Features.BlendPocketBuilder | Represents a NXOpen.Features.BlendPocket builder for Blend Pocket feature |
NXOpen.Features.BlockFeatureBuilder | Represents a block feature builder |
NXOpen.Features.BodyByEquationBuilder | Represents a NXOpen.Features.BodyByEquation builder |
NXOpen.Features.BooleanBuilder | Represents a boolean feature builder |
NXOpen.Features.BoundedPlaneBuilder | Represents a NXOpen.Features.BoundedPlane builder |
NXOpen.Features.BridgeCurveBuilder | Represents a NXOpen.Features.BridgeCurve builder |
NXOpen.Features.BridgeCurveBuilderEx | Represents a NXOpen.Features.BridgeCurve builder |
NXOpen.Features.BridgeSurfaceBuilder | Represents a NXOpen.Features.BridgeSurface builder |
NXOpen.Features.ChamferBuilder | Represents the chamfer builder data |
NXOpen.Features.ChangeShellThicknessBuilder | Represents a NXOpen.Features.ChangeShellThickness builder |
NXOpen.Features.CircularBlendCurveBuilder | Represents a NXOpen.Features.CircularBlendCurve builder |
NXOpen.Features.CoaxialBuilder | Represents a NXOpen.Features.Coaxial builder |
NXOpen.Features.ColorFaceBuilder | Represents a NXOpen.Features.ColorFaceBuilder |
NXOpen.Features.CombinedProjectionBuilder | Represents a NXOpen.Features.CombinedProjection builder |
NXOpen.Features.CombineSheetsBuilder | Represents a combine sheets builder |
NXOpen.Features.CompositeCurveBuilder | Represents a NXOpen.Features.CompositeCurve builder |
NXOpen.Features.ConcaveFacesBuilder | Represents a Concave Faces builder |
NXOpen.Features.ConeBuilder | Represents a builder for a cone feature |
NXOpen.Features.CoplanarBuilder | Represents a NXOpen.Features.Coplanar builder |
NXOpen.Features.CopyFaceBuilder | Represents a builder for a copy face feature |
NXOpen.Features.CurveLengthBuilder | Represents the CurveLength builder |
NXOpen.Features.CurveOnSurfaceBuilder | Curve On Surface builder class |
NXOpen.Features.CustomFeatureBuilder | Represents a Features.CustomFeature builder |
NXOpen.Features.CutFaceBuilder | Represents a builder for a cut face feature |
NXOpen.Features.CylinderBuilder | Represents a NXOpen.Features.Cylinder builder |
NXOpen.Features.DatumBuilder | Represents a builder for datum features |
NXOpen.Features.DatumAxisBuilder | Represents a datum axis feature builder |
NXOpen.Features.DatumPlaneBuilder | Represents a datum plane feature builder |
NXOpen.Features.DatumCsysBuilder | Represents a datum csys builder |
NXOpen.Features.DeformDefinitionBuilder | Used as a place holder for selected member features, expressions and external references for a deform definition feature record that is to be created |
NXOpen.Features.DeleteBodyBuilder | Represents a NXOpen.Features.DeleteBody builder for Delete Body feature |
NXOpen.Features.DeleteCurveBuilder | Represents a NXOpen.Features.DeleteCurve builder |
NXOpen.Features.DeleteEdgeBuilder | Represents a builder for a delete edge feature |
NXOpen.Features.DeleteFaceBuilder | Represents a builder for a delete face feature, don't use it until nx502 |
NXOpen.Features.DimensionBuilder | Represents a NXOpen.Features.DimensionBuilder |
NXOpen.Features.AngularDimBuilder | Represents a NXOpen.Features.AngularDim builder |
NXOpen.Features.LinearDimensionBuilder | Represents a NXOpen.Features.LinearDimension builder |
NXOpen.Features.RadialDimensionBuilder | Represents a NXOpen.Features.RadialDimension builder |
NXOpen.Features.DivideCurveBuilder | Represents a builder for non-associative divide curve operation |
NXOpen.Features.DividefaceBuilder | Represents a divide face builder |
NXOpen.Features.DraftBodyBuilder | Represents a NXOpen.Features.DraftBody builder |
NXOpen.Features.DraftBuilder | Represents a Draft Feature Builder that creates or edits a draft (Old name Taper) feature |
NXOpen.Features.EdgeBlendBuilder | Represents a Edge Blend builder |
NXOpen.Features.EdgeSymmetryBuilder | Represents a NXOpen.Features.EdgeSymmetry builder |
NXOpen.Features.EditCrossSectionBuilder | Represents a NXOpen.Features.EditCrossSection builder |
NXOpen.Features.EmbedManagerBuilder | Used to manage the interaction to Embed, Replace, Rename and Delete embedded file information in the part file |
NXOpen.Features.EmbossBodyBuilder | Represents a NXOpen.Features.EmbossBody builder |
NXOpen.Features.EmbossBuilder | Represents an emboss feature builder that creates or edits an emboss feature |
NXOpen.Features.EnlargeBuilder | Represents a NXOpen.Features.Enlarge builder |
NXOpen.Features.ExtendSheetBuilder | Represents a NXOpen.Features.ExtendSheet builder |
NXOpen.Features.ExtensionBuilder | Represents a NXOpen.Features.Extension builder |
NXOpen.Features.ExtractFaceBuilder | Represents a NXOpen.Features.ExtractFace builder |
NXOpen.Features.ExtrudeBuilder | Represents a extrude feature builder |
NXOpen.Features.FaceBlendBuilder | Represents a face blend builder |
NXOpen.Features.FillHoleBuilder | Represents a NXOpen.Features.FillHole builder |
NXOpen.Features.FitCurveBuilder | Represents a NXOpen.Features.FitCurve builder |
NXOpen.Features.SketchFitCurveBuilder | Sketch Fit Curve builder class |
NXOpen.Features.FitSurfaceBuilder | This class will provide the ability to fit surfaces through facet bodies or point sets/groups |
NXOpen.Features.FixedBuilder | Represents a builder for a fixed feature |
NXOpen.Features.FlatteningAndFormingBuilder | This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane |
NXOpen.Features.FlatteningAndFormingBuilderEx | This class will provide the solution to unwrap 3D non-planar, curved geometry to a 2D plane |
NXOpen.Features.FlowBlendBuilder | Represents a NXOpen.Features.FlowBlend builder |
NXOpen.Features.FreeTransformerBuilder | Represents a NXOpen.Features.FreeTransformer builder |
NXOpen.Features.GeneralConicBuilder | Represents a NXOpen.Features.GeneralConic builder |
NXOpen.Features.GeodesicChamferBuilder | Represents a NXOpen.Features.GeodesicChamfer builder for GeodesicChamfer command |
NXOpen.Features.GeodesicFilletBuilder | Represents a NXOpen.Features.GeodesicFillet builder for GeodesicFillet command |
NXOpen.Features.GeodesicIntersectBuilder | Represents a NXOpen.Features.GeodesicIntersect builder for Intersect command |
NXOpen.Features.GeodesicLineBuilder | Represents a NXOpen.Features.GeodesicLine builder for GeodesicLine command |
NXOpen.Features.GeodesicOffsetBuilder | Represents a NXOpen.Features.GeodesicOffset builder for Offset command |
NXOpen.Features.GeodesicPointBuilder | Represents a NXOpen.Features.GeodesicPoint builder for GeodesicPoint command |
NXOpen.Features.GeodesicProjectBuilder | Represents a NXOpen.Features.GeodesicProject builder for Project command |
NXOpen.Features.GeodesicResetBuilder | Represents a NXOpen.Features.GeodesicResetBuilder |
NXOpen.Features.GeodesicSketchBuilder | Represents a Features.GeodesicSketch builder for GeodesicSketch feature |
NXOpen.Features.GeodesicTrimBuilder | Represents a NXOpen.Features.GeodesicSketch builder for GeodesicTrim command |
NXOpen.Features.GeomcopyBuilder | Represents a NXOpen.Features.Geomcopy builder |
NXOpen.Features.GlobalShapingBuilder | Represents a NXOpen.Features.GlobalShaping builder |
NXOpen.Features.GlobalShapingCurveOffsetBuilder | The class used to define the curves and offset laws needed for the target curve list |
NXOpen.Features.GroupFaceBuilder | Represents a builder for a group face feature |
NXOpen.Features.HelixBuilder | Represents a NXOpen.Features.Helix builder |
NXOpen.Features.HolePackageBuilder | Represents a NXOpen.Features.HolePackage builder |
NXOpen.Features.HumanBuilder | Represents a human feature |
NXOpen.Features.IFormBuilder | Represents a NXOpen.Features.IForm builder |
NXOpen.Features.InstanceFeatureBuilder | instance feature builder |
NXOpen.Features.IntersectionCurveBuilder | Represents a NXOpen.Features.IntersectionCurveBuilder builder |
NXOpen.Features.IsoclineCurveBuilder | Represents a Features.IsoclineCurve builder |
NXOpen.Features.IsolateFeatureBuilder | Represents a NXOpen.Features.IsolateFeature builder |
NXOpen.Features.IsoparametricCurvesBuilder | Represents a NXOpen.Features.IsoparametricCurves builder |
NXOpen.Features.JoinCurvesBuilder | Represents a NXOpen.Features.JoinCurves builder |
NXOpen.Features.LabelChamferBuilder | Represents a NXOpen.Features.LabelChamfer builder |
NXOpen.Features.LabelNotchBlendBuilder | Represents a NXOpen.Features.LabelNotchBlend builder |
NXOpen.Features.LatticeBuilder | Represents a Features |
NXOpen.Features.LawCurveBuilder | Represents a NXOpen.Features.LawCurve builder |
NXOpen.Features.LawExtensionBuilder | Represents a NXOpen.Features.LawExtension builder |
NXOpen.Features.LawExtensionBuilderEx | Represents a NXOpen.Features.LawExtensionEx builder |
NXOpen.Features.LinkedFacetBuilder | Represents a NXOpen.Features.LinkedFacet builder |
NXOpen.Features.LocalScaleCurveBuilder | Represents a Features.LocalScaleCurve builder |
NXOpen.Features.MakeOffsetBuilder | Represents a NXOpen.Features.MakeOffset builder |
NXOpen.Features.MakeSolidBuilder | Represents a Features.MakeSolid builder |
NXOpen.Features.MapleBuilder | Represents a NXOpen.Features.Maple builder |
NXOpen.Features.MasterCutBuilder | Represents a master cut feature builder that creates, inquires, or edits a master cut feature associated with a Cut View |
NXOpen.Features.MatchEdgeBuilder | Represents a NXOpen.Features.MatchEdge builder |
NXOpen.Features.MathIntegrationBuilder | Represents a NXOpen.Features.MathIntegration builder |
NXOpen.Features.MeshSurfaceBuilder | Mesh Surface Builder class |
NXOpen.Features.MidSurfaceByFacePairsBuilder | Represents a NXOpen.Features.MidSurfaceByFacePairs builder |
NXOpen.Features.MidSurfaceUserDefinedBuilder | Represents a NXOpen.Features.MidSurfaceUserDefined builder |
NXOpen.Features.MirrorBodyBuilder | Represents a NXOpen.Features.MirrorBody builder |
NXOpen.Features.MirrorBuilder | Represents a NXOpen.Features.Mirror builder |
NXOpen.Features.MirrorCurveBuilder | Represents a NXOpen.Features.MirrorCurve builder |
NXOpen.Features.MirrorFaceBuilder | Represents a NXOpen.Features.MirrorFace builder |
NXOpen.Features.MirrorFeatureBuilder | Represents a NXOpen.Features.MirrorFeature builder |
NXOpen.Features.MoveCurveBuilder | Represents a NXOpen.Features.MoveCurve builder |
NXOpen.Features.MoveEdgeBuilder | Represents a NXOpen.Features.MoveEdge builder |
NXOpen.Features.MoveFaceBuilder | Represents a builder for a move face feature, don't use it until nx502 |
NXOpen.Features.NSidedSurfaceBuilder | Represents a NXOpen.Features.NSidedSurface builder |
NXOpen.Features.Offset3DCurveBuilder | Represents a Features.Offset3DCurveBuilder builder which implements offset curves along a direction with offset distance in three dimension |
NXOpen.Features.OffsetCurveBuilder | Represents a NXOpen.Features.OffsetCurve builder |
NXOpen.Features.OffsetEdgeBuilder | Represents a NXOpen.Features.OffsetEdge builder |
NXOpen.Features.OffsetEmbossBuilder | Represents a builder for an offset emboss feature |
NXOpen.Features.OffsetFaceBuilder | Represents a NXOpen.Features.OffsetFace builder |
NXOpen.Features.OffsetFacetBodyBuilder | Represents a NXOpen.Features.OffsetFacetBody |
NXOpen.Features.OffsetMoveCurveBuilder | Represents a NXOpen.Features.OffsetMoveCurve builder |
NXOpen.Features.OffsetRegionBuilder | Represents a builder for an offset region feature, don't use it until nx502 |
NXOpen.Features.OffsetSurfaceBuilder | This class represents a offset surface builder, used for creating or editing an offset surface feature |
NXOpen.Features.OvercrownBuilder | Represents a Overcrown Builder |
NXOpen.Features.ParallelBuilder | Represents a NXOpen.Features.Parallel builder |
NXOpen.Features.PartModuleBuilder | Represents a NXOpen.Features.PartModule builder |
NXOpen.Features.PasteFaceBuilder | Represents a builder for a paste face feature |
NXOpen.Features.PatchBuilder | Represents a NXOpen.Features.PatchBuilder Lets you use a sheet body to replace some of the faces of a solid body |
NXOpen.Features.PatchOpeningsBuilder | Represents a builder for a Patch Openings feature |
NXOpen.Features.PatternFaceBuilder | Represents a builder for a pattern face feature, don't use it until nx502 |
NXOpen.Features.PatternFaceFeatureBuilder | Represents a builder for a pattern face feature, post NX9 |
NXOpen.Features.PatternFeatureBuilder | Represents a NXOpen.Features.PatternFeature builder |
NXOpen.Features.PatternGeometryBuilder | This class represents the builder to be used to create Pattern Geometry features |
NXOpen.Features.PerpendicularBuilder | Represents a NXOpen.Features.Perpendicular builder |
NXOpen.Features.PointFeatureBuilder | Represents a NXOpen.Features.PointFeatureBuilder builder |
NXOpen.Features.PointSetBuilder | Represents a NXOpen.Features.PointSetBuilder |
NXOpen.Features.PoleSmoothingBuilder | Represents a NXOpen.Features.PoleSmoothing builder |
NXOpen.Features.PolylineBuilder | Polyline builder class |
NXOpen.Features.Subdivision.CagePolylineBuilder | Cage polyline builder class |
NXOpen.Features.ProjectCurveBuilder | Represents a NXOpen.Features.ProjectCurve builder |
NXOpen.Features.PromotionBuilder | Represents a NXOpen.Features.Promotion builder |
NXOpen.Features.PullFaceBuilder | Represents a NXOpen.Features.PullFace builder |
NXOpen.Features.RapidSurfaceBuilder | Represents a NXOpen.Features.RapidSurface builder |
NXOpen.Features.RefitFaceBuilder | Represents a NXOpen.Features.RefitFace builder |
NXOpen.Features.ReorderBlendsBuilder | Represents a NXOpen.Features.ReorderBlends builder |
NXOpen.Features.ReplaceBlendBuilder | Represents a builder for a Replace Blend feature |
NXOpen.Features.ReplaceFaceBuilder | Represents a builder for a replace face feature, don't use it until nx502 |
NXOpen.Features.ResizeBlendBuilder | Represents a builder for a resize blend feature, don't use it until nx502 |
NXOpen.Features.ResizeChamferBuilder | Represents a NXOpen.Features.ResizeChamfer builder |
NXOpen.Features.ResizeChamferCurveBuilder | Represents a NXOpen.Features.ResizeChamferCurve builder |
NXOpen.Features.ResizeCurveBuilder | Represents a NXOpen.Features.ResizeCurve builder |
NXOpen.Features.ResizeFaceBuilder | Represents a builder for a resize face feature, don't use it until nx502 |
NXOpen.Features.ResizePlaneBuilder | Represents a NXOpen.Features.ResizePlane builder |
NXOpen.Features.RevolveBuilder | Represents a revolve builder |
NXOpen.Features.RibbonBuilder | Represents a NXOpen.Features.Ribbon builder |
NXOpen.Features.RibBuilder | Represents a Features.Rib builder |
NXOpen.Features.RPOBuilder | Represents a RPO builder |
NXOpen.Features.HoleFeatureBuilder | Represents a Hole feature builder |
NXOpen.Features.RuledBuilder | Represents a NXOpen.Features.Ruled builder |
NXOpen.Features.ScaleBuilder | Represents a NXOpen.Features.Scale builder |
NXOpen.Features.SectionCurveBuilder | Represents a NXOpen.Features.SectionCurve builder |
NXOpen.Features.SectionEditBuilder | Represents a NXOpen.Features.SectionEdit builder |
NXOpen.Features.SectionInertiaAnalysisBuilder | Represents a NXOpen.Features.SectionInertiaAnalysis builder |
NXOpen.Features.SectionSurfaceBuilder | Represents a NXOpen.Features.SectionSurface builder |
NXOpen.Features.SectionSurfaceBuilderEx | Represents a NXOpen.Features.SectionSurface builder |
NXOpen.Features.ServiceOrientedBodyFeatureBuilder | Represents a NXOpen.Features.ServiceOrientedBodyFeature builder |
NXOpen.Features.ServiceOrientedFeatureCurveBuilder | Represents a NXOpen.Features.ServiceOrientedFeatureCurve builder |
NXOpen.Features.ScaleCurveBuilder | Represents a Features.ScaleCurveBuilder builder |
NXOpen.Features.SewBuilder | Represents a NXOpen.Features.Sew builder |
NXOpen.Features.SheetMetal.AdvancedFlangeBuilder | Represents a Sheetmetal Advanced Flange builder class |
NXOpen.Features.SheetMetal.AeroJoggleBuilder | Represents a Aerospace Sheet Metal Joggle Builder |
NXOpen.Features.SheetMetal.AeroLighteningCutoutBuilder | Represents a NXOpen.Features.SheetMetal.AeroLighteningCutoutBuilder |
NXOpen.Features.SheetMetal.BeadBuilder | Represents a Bead feature builder |
NXOpen.Features.SheetMetal.CleanUpUtilityBuilder | Represents a Clean-Up Utility builder builder |
NXOpen.Features.SheetMetal.ClosedCornerBuilder | Represents a Closed corner feature builder |
NXOpen.Features.SheetMetal.DimpleBuilder | Represents a Dimple feature builder |
NXOpen.Features.SheetMetal.DrawnCutoutBuilder | Represents a Drawn Cutout feature builder |
NXOpen.Features.SheetMetal.EdgeRipBuilder | Represents a Edge Rip feature builder |
NXOpen.Features.SheetMetal.EditBendBuilder | Represents a NXOpen.Features.EditBend builder |
NXOpen.Features.SheetMetal.EditCornerBuilder | Represents a NXOpen.Features.SheetMetal.EditCornerBuilder |
NXOpen.Features.SheetMetal.FlexibleCableBuilder | Represents a Flexible Cable feature builder |
NXOpen.Features.SheetMetal.GussetBuilder | Represents a NX Sheet Metal NXOpen.Features.Gusset builder |
NXOpen.Features.SheetMetal.HemFlangeBuilder | Represents a NXOpen.Features.HemFlange builder |
NXOpen.Features.SheetMetal.JoggleBuilder | Represents a Sheetmetal joggle builder class |
NXOpen.Features.SheetMetal.LighteningCutoutBuilder | Represents a Features.SheetMetal.LighteningCutout builder |
NXOpen.Features.SheetMetal.LouverBuilder | Represents a louver feature builder |
NXOpen.Features.SheetMetal.MetaformBuilder | Represents a NXOpen.Features.Metaform builder |
NXOpen.Features.SheetMetal.MigratedPanelBuilder | Represents an I-DEAS Migrated Panel feature builder |
NXOpen.Features.SheetMetal.ResizeNeutralFactorBuilder | Represents a Resize Neutral Factor Builder |
NXOpen.Features.SheetMetal.SheetmetalBaseBuilder | Represents a Sheet Metal Feature Builder to be used in the creation and modification of features |
NXOpen.Features.SheetMetal.AeroFlangeBuilder | Represents a Aerospace Sheet Metal Flange Builder |
NXOpen.Features.SheetMetal.AeroReformBuilder | Represents a Aerospace Sheet Metal REFORM Builder |
NXOpen.Features.SheetMetal.AeroUnformBuilder | Represents a Aerospace Sheet Metal UNFORM Builder |
NXOpen.Features.SheetMetal.BendBuilder | Represents a Bend feature builder |
NXOpen.Features.SheetMetal.BendTaperBuilder | Represents a Bend Taper feature builder |
NXOpen.Features.SheetMetal.BreakCornerBuilder | Represents a break corner feature builder |
NXOpen.Features.SheetMetal.BridgeTransitionBuilder | Represents a Bridge Transition builder |
NXOpen.Features.SheetMetal.ContourFlangeBuilder | Represents a Contour Flange feature builder |
NXOpen.Features.SheetMetal.ConvertToSheetmetalBuilder | This is the feature builder for the convert to sheetmetal feature |
NXOpen.Features.SheetMetal.FlangeBuilder | Represents a Flange feature builder |
NXOpen.Features.SheetMetal.FlatPatternBuilder | Represents a Flat Pattern feature builder |
NXOpen.Features.SheetMetal.AeroFlatPatternBuilder | Represents a Flat Pattern feature builder |
NXOpen.Features.SheetMetal.FlatSolidBuilder | Represents a Flat As Solid feature builder |
NXOpen.Features.SheetMetal.AeroFlatSolidBuilder | Represents a Flat As Solid feature builder |
NXOpen.Features.SheetMetal.JogBuilder | Represents a Jog feature builder |
NXOpen.Features.SheetMetal.LoftedFlangeBuilder | Represents a Lofted Flange feature builder |
NXOpen.Features.SheetMetal.MultiFlangeBuilder | Represents a Features.SheetMetal.MultiFlange builder |
NXOpen.Features.SheetMetal.NormalCutoutBuilder | Represents a NormalCutout feature builder |
NXOpen.Features.SheetMetal.RebendBuilder | The Rebend feature class |
NXOpen.Features.SheetMetal.ResizeBendAngleBuilder | Represents a NXOpen.Features.ResizeBendAngle builder |
NXOpen.Features.SheetMetal.ResizeBendRadiusBuilder | Represents a ResizeBendRadius feature builder |
NXOpen.Features.SheetMetal.SheetMetalFromSolidBuilder | Represents a NXOpen.Features.SheetMetalFromSolid builder (Sheet Metal from Solid) |
NXOpen.Features.SheetMetal.TabBuilder | Represents a Tab feature builder |
NXOpen.Features.SheetMetal.UnbendBuilder | The Unbend feature class |
NXOpen.Features.SheetMetal.SolidPunchBuilder | Represents a NXOpen.Features.SheetMetal.SolidPunchBuilder |
NXOpen.Features.SheetMetal.ThreeBendCornerBuilder | The Three Bend Corner feature class |
NXOpen.Features.ShelfBuilder | Represents a NXOpen.Features.Shelf builder |
NXOpen.Features.ShellBuilder | Represents the Shell feature builder |
NXOpen.Features.ShellFaceBuilder | Represents a NXOpen.Features.ShellFace builder |
NXOpen.Features.ShipDesign.AlongGuideCutBuilder | Represents a NXOpen.Features.ShipDesign.AlongGuideCut builder |
NXOpen.Features.ShipDesign.BracketBuilder | Represents a NXOpen.Features.ShipDesign.Bracket builder |
NXOpen.Features.ShipDesign.BulkHeadsBuilder | Represents a NXOpen.Features.ShipDesign.BulkHeads builder |
NXOpen.Features.ShipDesign.CollarPlateBuilder | Represents a NXOpen.Features.ShipDesign.CollarPlate builder |
NXOpen.Features.ShipDesign.ConceptFromSpreadsheetBuilder | Represents a NXOpen.Features.ShipDesign.ConceptFromSpreadsheet builder |
NXOpen.Features.ShipDesign.CopyPasteNewBuilder | Represents a NXOpen.Features.ShipDesign.CopyPasteNewBuilder It is used in Ship Building Application |
NXOpen.Features.ShipDesign.CornerCutBuilder | Builder used to create or edit a NXOpen.Features.ShipDesign.CornerCut feature |
NXOpen.Features.ShipDesign.CustomBracketBuilder | Represents a NXOpen.Features.ShipDesign.CustomBracket builder |
NXOpen.Features.ShipDesign.Cutout2Builder | Represents a NXOpen.Features.ShipDesign.Cutout2 builder |
NXOpen.Features.ShipDesign.CuttingSideFacesBuilder | Used to create a NXOpen.Features.ShipDesign.CuttingSideFacesBuilder which is used to attribute the cutting side, and opposing cutting side, faces on the plate bodies |
NXOpen.Features.ShipDesign.DecksBuilder | Represents a NXOpen.Features.ShipDesign.Decks builder |
NXOpen.Features.ShipDesign.DeleteSeamBuilder | Used to create a NXOpen.Features.ShipDesign.DeleteSeamBuilder which is used to delete the seams from the ship structural components |
NXOpen.Features.ShipDesign.DivideBuilder | Represents a Features.ShipDesign.Divide builder which is used to edit all divide features |
NXOpen.Features.ShipDesign.DvToMvMappingBuilder | Represents a NXOpen.Features.ShipDesign.DvToMvMapping builder |
NXOpen.Features.ShipDesign.EdgeCutBuilder | Represents a NXOpen.Features.ShipDesign.EdgeCut builder |
NXOpen.Features.ShipDesign.EditStockBuilder | Used to create a NXOpen.Features.ShipDesign.EditStockBuilder which is used to change the stock information on the basic design features |
NXOpen.Features.ShipDesign.EditWeldingBuilder | Used to create a NXOpen.Features.ShipDesign.EditWeldingBuilder which is used to change the welding characteristics on the seams in the plate systems |
NXOpen.Features.ShipDesign.EndCutBuilder | Represents a NXOpen.Features.ShipDesign.EndCut builder |
NXOpen.Features.ShipDesign.ExcessMaterialBuilder | Represents a NXOpen.Features.ShipDesign.ExcessMaterial builder |
NXOpen.Features.ShipDesign.FeatureParmsBuilder | This class is used to create or edit the information shared among all Ship Design features |
NXOpen.Features.ShipDesign.PlateSystemBuilder | This class is used to create or edit the information shared between all the Basic Design plate system features in the Ship Design application |
NXOpen.Features.ShipDesign.DeckBuilder | This class is used to create or edit a NXOpen.Features.ShipDesign.Deck feature |
NXOpen.Features.ShipDesign.GenericPlateSystemBuilder | This class is used to create or edit a NXOpen.Features.ShipDesign.GenericPlateSystem feature |
NXOpen.Features.ShipDesign.HullBuilder | This class is used to create or edit a NXOpen.Features.ShipDesign.Hull feature |
NXOpen.Features.ShipDesign.LongitudinalBulkheadBuilder | This class is used to create or edit a NXOpen.Features.ShipDesign.LongitudinalBulkhead feature |
NXOpen.Features.ShipDesign.TransverseBulkheadBuilder | This class is used to create or edit a NXOpen.Features.ShipDesign.TransverseBulkhead feature |
NXOpen.Features.ShipDesign.ProfileSystemBuilder | This class is used to create or edit the information shared between all the Basic Design profile system features in the Ship Design application |
NXOpen.Features.ShipDesign.EdgeReinforcementBuilder | Represents a NXOpen.Features.ShipDesign.EdgeReinforcement builder which is used to create or edit a edge reinforcement system feature |
NXOpen.Features.ShipDesign.EditBoundaryBuilder | Used to create a NXOpen.Features.ShipDesign.EditBoundaryBuilder which is used to change the boundaries and split knuckle locations of profile systems |
NXOpen.Features.ShipDesign.PillarSystemBuilder | Represents a NXOpen.Features.ShipDesign.PillarSystem builder which is used to create or edit a pillar system feature |
NXOpen.Features.ShipDesign.SeamBuilder | A NXOpen.Features.ShipDesign.SeamBuilder used to create or edit a ship design NXOpen.Features.ShipDesign.Seam feature |
NXOpen.Features.ShipDesign.StiffenerSystemBuilder | This class is used to create or edit a NXOpen.Features.ShipDesign.StiffenerSystem feature |
NXOpen.Features.ShipDesign.SmartRuleBuilder | Represents a NXOpen.Features.ShipDesign.SmartRule builder |
NXOpen.Features.ShipDesign.SubSystemBuilder | This class is used to edit the Sub System Definition of a NXOpen.Features.ShipDesign.SubSystems feature |
NXOpen.Features.ShipDesign.SubSystemsBuilder | This class is used to edit a NXOpen.Features.ShipDesign.SubSystems feature |
NXOpen.Features.ShipDesign.FrameBarOutBuilder | Represents a NXOpen.Features.ShipDesign.FrameBarOut builder |
NXOpen.Features.ShipDesign.InsertSheetBodyBuilder | Represents a NXOpen.Features.ShipDesign.InsertSheetBody builder |
NXOpen.Features.ShipDesign.InverseBendingLinesBuilder | Used to create or edit a NXOpen.Features.ShipDesign.InverseBendingLines feature |
NXOpen.Features.ShipDesign.ItFramesBuilder | Represents a NXOpen.Features.ShipDesign.ItFrames builder |
NXOpen.Features.ShipDesign.KnuckledProfilesBuilder | Represents a NXOpen.Features.ShipDesign.KnuckledProfiles builder |
NXOpen.Features.ShipDesign.MainDimensionsBuilder | Represents a NXOpen.Features.ShipDesign.MainDimensions builder |
NXOpen.Features.ShipDesign.ManufacturingOutBuilder | Represents a NXOpen.Features.ShipDesign.ManufacturingOut builder |
NXOpen.Features.ShipDesign.ManufacturingPreparationBuilder | This builder is used to adds attributes to the part and body identifying manufacturing related data |
NXOpen.Features.ShipDesign.MarkingLineBuilder | Represents a MarkingLine Feature builder |
NXOpen.Features.ShipDesign.MarkingLineDesignBuilder | Represents a new MarkingLine Feature builder |
NXOpen.Features.ShipDesign.PillarBuilder | Represents a NXOpen.Features.ShipDesign.Pillar builder |
NXOpen.Features.ShipDesign.PinJigBuilder | Represents a NXOpen.Features.ShipDesign.PinJig builder |
NXOpen.Features.ShipDesign.PlateBuilder | Represents a NXOpen.Features.ShipDesign.Plate builder |
NXOpen.Features.ShipDesign.PlateChamferBuilder | Represents a NXOpen.Features.ShipDesign.PlateChamfer builder |
NXOpen.Features.ShipDesign.PlateDivideBuilder | Represents a Features.ShipDesign.PlateDivide builder which is used to edit a plate divide feature |
NXOpen.Features.ShipDesign.PlatePreparationBuilder | Used to create or edit a NXOpen.Features.ShipDesign.PlatePreparation feature |
NXOpen.Features.ShipDesign.ProfileBuilder | Represents a NXOpen.Features.ShipDesign.Profile builder |
NXOpen.Features.ShipDesign.ProfileCutoutBuilder | Represents a NXOpen.Features.ShipDesign.ProfileCutout builder |
NXOpen.Features.ShipDesign.ProfileListBuilder | Represents a NXOpen.Features.ShipDesign.ProfileList builder |
NXOpen.Features.ShipDesign.ProfileTransitionBuilder | Builder used to create or edit a NXOpen.Features.ShipDesign.ProfileTransition feature |
NXOpen.Features.ShipDesign.ReferenceLineBuilder | Represents a NXOpen.Features.ShipDesign.ReferenceLine builder |
NXOpen.Features.ShipDesign.ReverseSplitBuilder | This class is used to provide the capability to reverse the split interaction between ship structures |
NXOpen.Features.ShipDesign.RollingLineBuilder | Represents a NXOpen.Features.ShipDesign.RollingLine builder |
NXOpen.Features.ShipDesign.ShellExpansionBuilder | Represents a NXOpen.Features.ShipDesign.ShellExpansion builder |
NXOpen.Features.ShipDesign.ShellTemplateBuilder | Used to edit or create a NXOpen.Features.ShipDesign.ShellTemplate feature |
NXOpen.Features.ShipDesign.ShipCutoutBuilder | Represents a NXOpen.Features.ShipDesign.ShipCutout builder |
NXOpen.Features.ShipDesign.ShipDesignPreferencesBuilder | Represents a NXOpen.Features.ShipDesign.ShipDesignPreferencesBuilder which is used to change default object display settings for ship structures |
NXOpen.Features.ShipDesign.ShipEndCutBuilder | Represents a NXOpen.Features.ShipDesign.ShipEndCut builder |
NXOpen.Features.ShipDesign.ShipFlatPatternBuilder | Represents a NXOpen.Features.ShipDesign.ShipFlatPattern builder |
NXOpen.Features.ShipDesign.ShipIntersectionsBuilder | Represents a NXOpen.Features.ShipDesign.ShipIntersections builder |
NXOpen.Features.ShipDesign.ShipPreparationBuilder | Creates a builder used to prepare basic design data for meshing |
NXOpen.Features.ShipDesign.ShipProfileCutoutBuilder | Represents a NXOpen.Features.ShipDesign.ProfileCutout builder for editing legacy(NX75) profile cutout feature |
NXOpen.Features.ShipDesign.ShipSectionBuilder | Represents a NXOpen.Features.ShipDesign.ShipSection builder |
NXOpen.Features.ShipDesign.SteelCollarPlateBuilder | Represents a NXOpen.Features.ShipDesign.SteelCollarPlate builder |
NXOpen.Features.ShipDesign.SteelDistributionBuilder | Represents a NXOpen.Features.ShipDesign.SteelDistribution builder |
NXOpen.Features.ShipDesign.SteelInsulationBuilder | Represents a builder that is used to create or edit a NXOpen.Features.ShipDesign.SteelInsulation feature |
NXOpen.Features.ShipDesign.SteelSupportBuilder | Represents a NXOpen.Features.ShipDesign.SteelSupport builder |
NXOpen.Features.ShipDesign.SteelVentHolesBuilder | Represents a NXOpen.Features.ShipDesign.SteelVentHoles builder |
NXOpen.Features.ShipDesign.StiffenerBuilder | Represents a NXOpen.Features.ShipDesign.Stiffener builder |
NXOpen.Features.ShipDesign.TraceLinesBuilder | Represents a NXOpen.Features.ShipDesign.TraceLines builder |
NXOpen.Features.ShipDesign.TransFrameBuilder | Represents a NXOpen.Features.ShipDesign.TransFrame builder |
NXOpen.Features.ShipDesign.InsertFramesBuilder | Represents a NXOpen.Features.ShipDesign.InsertFramesBuilder builder |
NXOpen.Features.ShipDesign.YFrameBuilder | Represents a NXOpen.Features.ShipDesign.YFrameBuilder |
NXOpen.Features.ShipDesign.ZFrameBuilder | Represents a NXOpen.Features.ShipDesign.ZFrameBuilder |
NXOpen.Features.ShipDesign.UpdateShipLibraryBuilder | Represents a NXOpen.Features.ShipDesign.UpdateShipLibrary builder |
NXOpen.Features.ShipDesign.VentHolesMarkingBuilder | Represents a NXOpen.Features.ShipDesign.VentHolesMarking builder |
NXOpen.Features.ShipDesign.VentilationHoles2Builder | Represents a NXOpen.Features.ShipDesign.VentilationHoles2 builder |
NXOpen.Features.ShipDesign.WeldCut2Builder | Represents a NXOpen.Features.ShipDesign.WeldCut2 builder |
NXOpen.Features.ShipDesign.WeldCutBuilder | Represents a NXOpen.Features.ShipDesign.WeldCut builder |
NXOpen.Features.SilhouetteFlangeBuilder | Represents a NXOpen.Features.SilhouetteFlange builder |
NXOpen.Features.SmoothCurveStringBuilder | Represents a Features.SmoothCurveString builder |
NXOpen.Features.SmoothSplineBuilder | Represents a NXOpen.Features.SmoothSpline builder |
NXOpen.Features.SnipSurfaceBuilder | Represents a NXOpen.Features.SnipSurface builder |
NXOpen.Features.SphereBuilder | Represents a NXOpen.Features.Sphere builder |
NXOpen.Features.SphericalCornerBuilder | Represents a NXOpen.Features.SphericalCorner builder |
NXOpen.Features.SpineCurveBuilder | Represents a Features.SpineCurve builder |
NXOpen.Features.SplitBodyBuilder | Represents a NXOpen.Features.SplitBody builder |
NXOpen.Features.StepBuilder | Represents a NXOpen.Features.Step builder |
NXOpen.Features.StudioSplineBuilder | Studio Spline builder class |
NXOpen.Features.StudioSplineBuilderEx | Studio Spline builder class |
NXOpen.Features.DraftingSplineBuilder | Sketch Spline builder class |
NXOpen.Features.SketchSplineBuilder | Sketch Spline builder class |
NXOpen.Features.StudioSurfaceBuilder | Represents a NXOpen.Features.StudioSurface builder |
NXOpen.Features.StudioSurfaceBuilderEx | Represents a Features.StudioSurfaceEx builder |
NXOpen.Features.StudioXformBuilder | Represents a NXOpen.Features.StudioXform builder |
NXOpen.Features.StudioXformBuilderEx | Represents a NXOpen.Features.StudioXform builder |
NXOpen.Features.StyledBlendBuilder | Represents a NXOpen.Features.StyledBlend builder |
NXOpen.Features.StyledCornerBuilder | Represents a NXOpen.Features.StyledCorner builder |
NXOpen.Features.StyledSweepBuilder | Represents a NXOpen.Features.StyledSweep builder |
NXOpen.Features.SweepAlongGuideBuilder | Represents a NXOpen.Features.SweepAlongGuide builder |
NXOpen.Features.SweptBuilder | Represents a NXOpen.Features.Swept builder |
NXOpen.Features.SweptVolumeBuilder | Represents a NXOpen.Features.SweptVolume builder |
NXOpen.Features.SymmetricBuilder | Represents a NXOpen.Features.Symmetric builder |
NXOpen.Features.TangentBuilder | Represents a NXOpen.Features.Tangent builder |
NXOpen.Features.TextBuilder | Represents a NXOpen.Features.Text builder |
NXOpen.Features.ThickenBuilder | Represents a builder for a NXOpen.Features.Thicken feature |
NXOpen.Features.ThroughCurveMeshBuilder | Represents a NXOpen.Features.ThroughCurveMesh builder |
NXOpen.Features.ThroughCurvesBuilder | Represents a NXOpen.Features.ThroughCurves builder |
NXOpen.Features.ToolingBoxBuilder | Represents a NXOpen.Features.ToolingBox builder |
NXOpen.Features.TrimAndExtendBuilder | Represents a NXOpen.Features.TrimAndExtend builder |
NXOpen.Features.TrimBody2Builder | Represents a NXOpen.Features.TrimBody2 builder for Trim Body feature |
NXOpen.Features.TrimBodyBuilder | Represents the trim body feature builder |
NXOpen.Features.TrimCornerBuilder | Represents a builder for non-associative trim corner operation |
NXOpen.Features.TrimCurve2Builder | Represents a NXOpen.Features.TrimCurve2 builder |
NXOpen.Features.TrimCurveBuilder | Represents a NXOpen.Features.TrimCurve builder |
NXOpen.Features.TrimExtendBuilder | Represents a NXOpen.Features.TrimExtend builder |
NXOpen.Features.TrimSheetBuilder | Represents a NXOpen.Features.TrimSheet builder |
NXOpen.Features.TubeBuilder | Represents a NXOpen.Features.Tube builder |
NXOpen.Features.UnsewBuilder | Represents a NXOpen.Features.Unsew builder |
NXOpen.Features.UntrimBuilder | Represents a NXOpen.Features.Untrim builder |
NXOpen.Features.UserDefinedObjectFeatureBuilder | Represents a user defined object feature builder |
NXOpen.Features.VariableOffsetBuilder | Represents a NXOpen.Features.VariableOffset builder |
NXOpen.Features.VarOffsetFaceBuilder | Represents a Features.VarOffsetFace builder |
NXOpen.Features.VarsweepBuilder | Represents a Variational Sweep feature builder |
NXOpen.Features.VehicleDesign.AllAroundVisionBuilder | A NXOpen.Features.VehicleDesign.AllAroundVisionBuilder used to create or edit a vehicle design NXOpen.Features.VehicleDesign.AllAroundVision feature |
NXOpen.Features.VehicleDesign.BumperPendulumBuilder | Represents a NXOpen.Features.VehicleDesign.BumperPendulum builder |
NXOpen.Features.VehicleDesign.CloseRangeVisibilityBuilder | The builder to create close range visibility feature |
NXOpen.Features.VehicleDesign.CrashBarrierBuilder | Represents a NXOpen.Features.VehicleDesign.CrashBarrier builder to create and edit a vehicle design crash barrier |
NXOpen.Features.VehicleDesign.DynamicCurbBuilder | Represents a NXOpen.Features.VehicleDesign.DynamicCurb builder |
NXOpen.Features.VehicleDesign.GroundClearanceBuilder | Represents a NXOpen.Features.VehicleDesign.GroundClearance builder |
NXOpen.Features.VehicleDesign.HeadImpactAPillarBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactAPillarBuilder |
NXOpen.Features.VehicleDesign.HeadImpactBPillarBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactBPillarBuilder |
NXOpen.Features.VehicleDesign.HeadImpactBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactBuilder |
NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOPillarBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOPillarBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOtherRailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOtherRailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRearHeaderBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRearHeaderBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRPillarBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRPillarBuilder |
NXOpen.Features.VehicleDesign.HeadImpactSideRailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactSideRailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactUpperRoofBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactUpperRoofBuilder |
NXOpen.Features.VehicleDesign.HoodVisibilityBuilder | Represents a NXOpen.Features.VehicleDesign.HoodVisibility builder |
NXOpen.Features.VehicleDesign.InnerAngleBuilder | Represents a NXOpen.Features.VehicleDesign.InnerAngle builder, used to create or edit inner angle feature |
NXOpen.Features.VehicleDesign.ManikinBuilder | Represents a NXOpen.Features.VehicleDesign.Manikin builder |
NXOpen.Features.VehicleDesign.MirrorCertificationBuilder | A NXOpen.Features.VehicleDesign.MirrorCertificationBuilder used to create or edit a vehicle design NXOpen.Features.VehicleDesign.MirrorCertification feature |
NXOpen.Features.VehicleDesign.OilPanBuilder | Represents a NXOpen.Features.VehicleDesign.OilPan builder to create and edit a vehicle design oil pan |
NXOpen.Features.VehicleDesign.PedestrianProtectionBuilder | Represents a NXOpen.Features.VehicleDesign.PedestrianProtection builder |
NXOpen.Features.VehicleDesign.ReflectionDataBuilder | Represents a NXOpen.Features.VehicleDesign.ReflectionData builder |
NXOpen.Features.VehicleDesign.SeatBeltAnchorageBuilder | Represents a Features.VehicleDesign.SeatBeltAnchorage builder |
NXOpen.Features.VehicleDesign.StaticCurbBuilder | Represents a NXOpen.Features.VehicleDesign.StaticCurb builder used to create or edit static curb feature |
NXOpen.Features.VehicleDesign.TireEnvelopeBuilder | Represents a builder that is used to edit or create a NXOpen.Features.VehicleDesign.TireEnvelope |
NXOpen.Features.VehicleDesign.VehicleCoordinateSystemBuilder | Represents a NXOpen.Features.VehicleDesign.VehicleCoordinateSystem builder |
NXOpen.Features.VehicleDesign.VisionPlaneBuilder | Represents a NXOpen.Features.VehicleDesign.VisionPlane builder used to create or edit a Vision Plane |
NXOpen.Features.VehicleDesign.WheelCoveringBuilder | Represents a NXOpen.Features.VehicleDesign.WheelCovering feature builder for wheel covering surface section checking |
NXOpen.Features.VehicleDesign.WheelFixingBuilder | Represents a NXOpen.Features.VehicleDesign.WheelFixing builder used to create or edit a vehicle design wheel fixing |
NXOpen.Features.VehicleDesign.WindshieldDatumBuilder | Represents a NXOpen.Features.VehicleDesign.WindshieldDatum builder used to create or edit a Windshield Datum |
NXOpen.Features.VirtualBlendEdgeBuilder | Represents a NXOpen.Features.VirtualBlendEdgeBuilder |
NXOpen.Features.VirtualCurveBuilder | Represents a NXOpen.Features.VirtualCurve builder |
NXOpen.Features.WaveDatumBuilder | Represents a Wave Datum builder |
NXOpen.Features.WaveLinkBuilder | Represents a Wavelink Feature builder |
NXOpen.Features.WavePointBuilder | Represents a Features.Feature builder |
NXOpen.Features.WaveRoutingBuilder | Represents a NXOpen.Features.WaveRoutingBuilder |
NXOpen.Features.WaveSketchBuilder | Represents a WaveSketchBuilder |
NXOpen.Features.WrapBuilder | Represents a NXOpen.Features.WrapUnwrap builder |
NXOpen.Features.WrapGeometryBuilder | Represents a NXOpen.Features.WrapGeometry builder |
NXOpen.LineDesigner.ColumnFeatureBuilder | Represents a LineDesigner.ColumnFeature Features |
NXOpen.LineDesigner.HoleFeatureBuilder | Represents a LineDesigner.HoleFeature builder |
NXOpen.LineDesigner.RailingFeatureBuilder | Represents a LineDesigner.RailingFeature Features |
NXOpen.LineDesigner.TypedConnectorFeatureBuilder | Represents a LineDesigner.TypedConnectorFeature Features |
NXOpen.SketchIntersectionCurveBuilder | Represents a NXOpen.SketchIntersectionCurve builder |
NXOpen.SketchIntersectionPointBuilder | Represents a NXOpen.SketchIntersectionPoint builder |
NXOpen.Tooling.DieEngDieTipBuilder | Die Engineer die tip management builder |
NXOpen.Tooling.DieEngFormTaskBuilder | Represents a Form Task builder |
NXOpen.Tooling.DieEngLineupBuilder | Die Engineer lineup management builder |
NXOpen.Tooling.DieEngStampingCarryoverBuilder | Represents a Stamping Carryover builder |
NXOpen.Tooling.DieEngStampingOutputBuilder | Represents a Stamping Output builder |
NXOpen.Tooling.DieEngTrimTaskBuilder | Die Engineer trim task management builder, create a trim task by selected die tip, trim bounds, start plane and end plane |
NXOpen.Tooling.PrebendBuilder | Represents a NXOpen.Tooling.PrebendBuilder builder to divide bend faces |
NXOpen.Tooling.UniversalUnformBuilder | Represents a NXOpen.Tooling.UniversalUnformBuilder builder |
NXOpen.Weld.CompoundWeldBuilder | Represents a NXOpen.Weld.CompoundWeld builder |
NXOpen.Weld.FilletBuilder | Represents a NXOpen.Weld.Fillet builder |
NXOpen.Weld.GrooveBuilder | Represents a Groove Weld feature |
NXOpen.Weld.JointmarkBuilder | Represents a NXOpen.Weld.Jointmark builder |
NXOpen.Weld.PointMarkBuilder | Used to create or edit a NXOpen.Weld.PointMark feature |
NXOpen.Weld.PlugSlotBuilder | Represents a NXOpen.Weld.PlugSlot builder |
NXOpen.Weld.TransformBuilder | Represents a NXOpen.Weld.TransformBuilder builder |
NXOpen.Weld.WeldGrooveBuilder | Represents a NXOpen.Weld.WeldGroove builder |
NXOpen.Features.FeatureReplayBuilder | Represents a NXOpen.Features.FeatureReplayBuilder builder |
NXOpen.Features.GuidedExtensionBuilderEx | Represents a NXOpen.Features.GuidedExtensionEx builder |
NXOpen.Features.MeshTransformerBuilder | Represents a NXOpen.Features.MeshTransformer builder |
NXOpen.Features.MoveObjectBuilder | Represents a NXOpen.Features.MoveObjectBuilder |
NXOpen.Features.OptimizeCurveBuilder | Represents a builder of optimize curve |
NXOpen.Features.OptimizeFaceBuilder | Represents a builder of optimize face |
NXOpen.Features.PaintParametersBuilder | Represents a paint feature parameters builder |
NXOpen.Features.ReferenceMapperBuilder | Represents a NXOpen.Features.ReferenceMapperBuilder It is used in the context of Boolean Target/Tool Mapping |
NXOpen.Features.RegionListItemBuilder | Represents a Features.RegionListItemBuilder builder |
NXOpen.Features.RemoveParametersBuilder | Represents a NXOpen.Features.RemoveParametersBuilder |
NXOpen.Features.ReplaceFeatureBuilder | Represents a replace feature builder |
NXOpen.Features.SheetMetal.BendListBuilder | Represents a Sheetmetal Flat Pattern bend list builder class |
NXOpen.Features.SheetMetal.BendListItemBuilder | Represents a Sheetmetal Flat Pattern bend list item builder class |
NXOpen.Features.SheetMetal.ExportFlatPatternBuilder | Represents a Export flat pattern builder |
NXOpen.Features.ShipDesign.AddDataSetBuilder | This class is used to add a dataset to an item in Teamcenter |
NXOpen.Features.ShipDesign.AnchorPoint | Represents a NXOpen.Features.ShipDesign.AnchorPoint builder |
NXOpen.Features.ShipDesign.BuiltUpManModeBuilder | This class allows you to set the NX Ship BuiltUp Profile Manufacturing Mode for one or more components |
NXOpen.Features.ShipDesign.CompareModeBuilder | This class is used to compare between the two Shipbuilding modes of Design and Manufacturing |
NXOpen.Features.ShipDesign.CopyObjectsBuilder | Represents a NXOpen.Features.ShipDesign.CopyObjectsBuilder It is used in Ship Building Application |
NXOpen.Features.ShipDesign.CornerCutListItemBuilder | Used to supply the list of corner cut locations and seam curves to the NXOpen.Features.ShipDesign.CornerCutBuilder |
NXOpen.Features.ShipDesign.DisplaySolidBuilder | This class is used to identify ship structure that is to have a temporary solid display built for it |
NXOpen.Features.ShipDesign.DrawingAnnotationBuilder | This builder allows you to define the drawing annotation information |
NXOpen.Features.ShipDesign.EditContextAttributesBuilder | Represents the class Features |
NXOpen.Features.ShipDesign.ExamineSteelFeatureBuilder | Represents the examine steel feature builder to examine steel feature |
NXOpen.Features.ShipDesign.ExpansionDrawingBuilder | Represents a NXOpen.Features.ShipDesign.ExpansionDrawingBuilder |
NXOpen.Features.ShipDesign.FeaturesBatchOperationBuilder | Use this to cycle through the assembly components and perform the operation globally on the specified feature type |
NXOpen.Features.ShipDesign.FeaturesToTagBuilder | This class is used to add an attribute to profile features that have been modified by the user to display a 'Metal to Metal' design 'feature' |
NXOpen.Features.ShipDesign.FilterBuilder | A builder that allows the user to define common properties of ship objects and then add objects of similar properties to the select object list |
NXOpen.Features.ShipDesign.GeneralArrangement.FaceCharacteristicsBuilder | Represents a builder to be used to add face characteristics attributes and color to specified faces |
NXOpen.Features.ShipDesign.GeneralArrangement.ProjectInitializationBuilder | This class is used to Initialize general arrangement project |
NXOpen.Features.ShipDesign.GeneralArrangementViewBuilder | This builder allows you to define the general arrangement view information |
NXOpen.Features.ShipDesign.InteractiveAnnotationBuilder | Represents a NXOpen.Features.ShipDesign.InteractiveAnnotationBuilder builder |
NXOpen.Features.ShipDesign.LabellingRoomsBuilder | Represents a Features.ShipDesign.LabellingRoomsBuilder builder |
NXOpen.Features.ShipDesign.ManufacturingAssemblyNavigatorBuilder | This class is used to define Manufacturing Assembly Structure |
NXOpen.Features.ShipDesign.ManufacturingDataBuilder | This class is used to generate Manufacturing data |
NXOpen.Features.ShipDesign.ManufacturingStockBuilder | Represents a NXOpen.Features.ShipDesign.ManufacturingStockBuilder builder |
NXOpen.Features.ShipDesign.MaterialAllowanceBuilder | Represents the material allowance feature builder to examine steel feature |
NXOpen.Features.ShipDesign.MaterialEstimationBuilder | Represents the class Features |
NXOpen.Features.ShipDesign.MirrorShipStructureBuilder | Copy the selected parts (components) about the Mirror Plane with full model history and feature data |
NXOpen.Features.ShipDesign.MoveToContainerBuilder | This class is used to move detail design parts to a new ship container |
NXOpen.Features.ShipDesign.OrientationDefinitionBuilder | This class defines the top level object for use in definining the orientation of stiffeners and edge reinforcements |
NXOpen.Features.ShipDesign.OrientationRegionItemBuilder | This class defines each region of the orientation |
NXOpen.Features.ShipDesign.PenetrationAssociationBuilder | Represents a NXOpen.Features.ShipDesign.PenetrationAssociationBuilder builder |
NXOpen.Features.ShipDesign.PenetrationCutoutBuilder | Represents a NXOpen.Features.ShipDesign.PenetrationRequest builder |
NXOpen.Features.ShipDesign.PenetrationRequestBuilder | Represents a NXOpen.Features.ShipDesign.PenetrationRequest builder |
NXOpen.Features.ShipDesign.PenetrationRequestForCutoutBuilder | Represents a Features.ShipDesign.PenetrationRequest builder |
NXOpen.Features.ShipDesign.PenetrationReviewRequestBuilder | Represents a Features.ShipDesign.PenetrationRequest builder |
NXOpen.Features.ShipDesign.PlaneListBuilder | This class is used to place a plane into a list |
NXOpen.Features.ShipDesign.PlateBoundaryOptionBuilder | Represents a NXOpen.Features.ShipDesign.PlateBoundaryOptionBuilder builder to define the plate boundary option |
NXOpen.Features.ShipDesign.PlateStockBuilder | This builder allows you to define the stock information for plate system features in ship design |
NXOpen.Features.ShipDesign.ProjectSetupBuilder | Represents a project setup builder for ship |
NXOpen.Features.ShipDesign.QualifySketchBuilder | Represents a NXOpen.Features.ShipDesign.QualifySketchBuilder builder |
NXOpen.Features.ShipDesign.RebaseBuilder | This class is used to synchronize the end cuts from the ones in mfg group to design group |
NXOpen.Features.ShipDesign.RemoveSplitBuilder | Represents a NXOpen.Features.ShipDesign.RemoveSplitBuilder |
NXOpen.Features.ShipDesign.RoomAttributesBuilder | Represents a NXOpen.Features.ShipDesign.RoomAttributesBuilder It is used in Ship General Arrangement Application |
NXOpen.Features.ShipDesign.RoomBuilder | Represents a room builder for general arrangement |
NXOpen.Features.ShipDesign.RoomContainerBuilder | Represents a Features.ShipDesign.RoomContainerBuilder builder |
NXOpen.Features.ShipDesign.RoomPanelBuilder | Represents a Features.ShipDesign.RoomPanelBuilder builder |
NXOpen.Features.ShipDesign.SectionDrawingBuilder | This builder allows you to define the section drawing information |
NXOpen.Features.ShipDesign.SectionEditorBuilder | Represents a NXOpen.Features.ShipDesign.SectionEditorBuilder builder |
NXOpen.Features.ShipDesign.SectionViewBuilder | It represents NXOpen.Features.ShipDesign.SectionViewBuilder |
NXOpen.Features.ShipDesign.SetModeBuilder | This class is used to set the mode to design or manufacturing |
NXOpen.Features.ShipDesign.ShipAttributeHolder | Represents a NXOpen.Features.ShipDesign.ShipAttributeHolder builder |
NXOpen.Features.ShipDesign.ShipContainerBuilder | This class is used to specify the "container" part for the Ship Structures application, i |
NXOpen.Features.ShipDesign.ShipCoordinatesBuilder | Represents a NXOpen.Features.ShipDesign.ShipCoordinates builder |
NXOpen.Features.ShipDesign.ShipDesignVersionUpBuilder | Represents a NXOpen.Features.ShipDesign.ShipDesignVersionUpBuilder builder |
NXOpen.Features.ShipDesign.ShipFeatureConverter | This class is used to convert/upgrade legacy Ship Design features |
NXOpen.Features.ShipDesign.ShipTrimBodyBuilder | Represents a NXOpen.Features.ShipDesign.ShipTrimBodyBuilder |
NXOpen.Features.ShipDesign.SplitProfilePlateBuilder | Represents a NXOpen.Features.ShipDesign.SplitProfilePlateBuilder |
NXOpen.Features.ShipDesign.SplitStandardPartBuilder | Represents a NXOpen.Features.ShipDesign.SplitStandardPartBuilder |
NXOpen.Features.ShipDesign.StandardPartFrameworkBuilder | Represents the standard part framework builder to add or edit ship standard part |
NXOpen.Features.ShipDesign.StandardPartItemBuilder | Represents the ship standard part item builder |
NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder | Represents a NXOpen.Features.ShipDesign.SteelFeatureSpreadsheetBuilder builder |
NXOpen.Features.ShipDesign.SynchronizeDesignViewBuilder | This class is used to synchronize body features from design view to manufacturing view |
NXOpen.Features.ShipDesign.ThicknessDirectionBuilder | This class allows you to define the thickness direction for plate system features in Ship Basic Design and and for grid planes in Ship Concept Design |
NXOpen.Features.ShipDesign.TransitionBuilder | This is to create a NXOpen.Features.ShipDesign.TransitionBuilder which is used to create Detail Design elements from Basic Design elements |
NXOpen.Features.ShipDesign.UnfoldedMinRecBuilder | Represents the class Features |
NXOpen.Features.ShipDesign.ValidateModelBuilder | This is to create a NXOpen.Features.ShipDesign.ValidateModelBuilder which is used to validate Basic Design Structures |
NXOpen.Features.ShipDesign.VerifyPenetrationBuilder | Represents a NXOpen.Features.ShipDesign.VerifyPenetrationBuilder builder |
NXOpen.Features.ShipDesign.WeightAndCGBuilder | Represents the class Features |
NXOpen.Features.ShowRelatedFacesBuilder | Represents a builder for a Show Related Faces |
NXOpen.Features.Subdivision.CopyCageBuilder | Represents a NXOpen.Features.Subdivision.CopyCageBuilder builder |
NXOpen.Features.Subdivision.CopyCageData | Represents a NXOpen.Features.Subdivision.CopyCageData |
NXOpen.Features.Subdivision.DefineWorkRegionBuilder | Represents a Features.Subdivision.DefineWorkRegionBuilder builder |
NXOpen.Features.Subdivision.DeleteConstraintBuilder | Represents a NXOpen.Features.Subdivision.DeleteConstraintBuilder builder |
NXOpen.Features.Subdivision.ExportSubdivisionGeometryBuilder | Represents a NXOpen.Features.Subdivision.ExportSubdivisionGeometryBuilder builder |
NXOpen.Features.Subdivision.ExtractCagePolylineBuilder | Extract cage polyline builder class |
NXOpen.Features.Subdivision.ImportSubdivisionGeometryBuilder | Represents a NXOpen.Features.Subdivision.ImportSubdivisionGeometryBuilder builder |
NXOpen.Features.Subdivision.MergeSubdivisionBodiesBuilder | Represents a Features.Subdivision.MergeSubdivisionBodiesBuilder builder |
NXOpen.Features.Subdivision.MirrorCageBuilder | Represents a NXOpen.Features.Subdivision.MirrorCageBuilder builder |
NXOpen.Features.Subdivision.OffsetCageBuilder | Represents a NXOpen.Features.Subdivision.OffsetCageBuilder builder |
NXOpen.Features.Subdivision.PasteCageData | Represents a NXOpen.Features.Subdivision.PasteCageData builder |
NXOpen.Features.Subdivision.SplitSubdivisionBodyBuilder | Represents a Features.Subdivision.SplitSubdivisionBodyBuilder builder |
NXOpen.Features.Subdivision.StartSymmetricModelingBuilder | Represents a NXOpen.Features.Subdivision.StartSymmetricModelingBuilder builder |
NXOpen.Features.Subdivision.SubdivisionBridgeFaceBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionBridgeFaceBuilder builder |
NXOpen.Features.Subdivision.SubdivisionConnectCageBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionConnectCageBuilder builder |
NXOpen.Features.Subdivision.SubdivisionDeleteCageBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionDeleteCageBuilder builder |
NXOpen.Features.Subdivision.SubdivisionDeleteFaceBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionDeleteFaceBuilder builder |
NXOpen.Features.Subdivision.SubdivisionDeleteObjectBuilder | Represents a Features.Subdivision.SubdivisionDeleteObjectBuilder builder |
NXOpen.Features.Subdivision.SubdivisionExtrudeCageBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionExtrudeCageBuilder builder |
NXOpen.Features.Subdivision.SubdivisionFillBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionFillBuilder builder |
NXOpen.Features.Subdivision.SubdivisionLoftBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionLoftBuilder builder |
NXOpen.Features.Subdivision.SubdivisionMergeFaceBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionMergeFaceBuilder builder |
NXOpen.Features.Subdivision.SubdivisionPrimitiveShapeBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionPrimitiveShapeBuilder builder |
NXOpen.Features.Subdivision.SubdivisionPrimitiveShapeBuilderEx | Represents a Features.Subdivision.SubdivisionPrimitiveShapeBuilderEx builder |
NXOpen.Features.Subdivision.SubdivisionProjectCageBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionProjectCageBuilder builder |
NXOpen.Features.Subdivision.SubdivisionRevolveBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionRevolveBuilder builder |
NXOpen.Features.Subdivision.SubdivisionSetContinuityBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionSetContinuityBuilder builder |
NXOpen.Features.Subdivision.SubdivisionSetWeightBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionSetWeightBuilder builder |
NXOpen.Features.Subdivision.SubdivisionSewCageBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionSewCageBuilder builder |
NXOpen.Features.Subdivision.SubdivisionSplitFaceBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionSplitFaceBuilder builder |
NXOpen.Features.Subdivision.SubdivisionSubdivideFaceBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionSubdivideFaceBuilder builder |
NXOpen.Features.Subdivision.SubdivisionSweepBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionSweepBuilder builder |
NXOpen.Features.Subdivision.SubdivisionTubeBuilder | Represents a NXOpen.Features.Subdivision.SubdivisionTubeBuilder builder |
NXOpen.Features.Subdivision.TransformCageData | Represents a NXOpen.Features.Subdivision.TransformCageData builder |
NXOpen.Features.VehicleDesign.BaseDataBuilder | Represents a NXOpen.Features.VehicleDesign.BaseDataBuilder |
NXOpen.Features.VehicleDesign.BaseDataDriverBuilder | Represents a NXOpen.Features.VehicleDesign.BaseDataDriverBuilder |
NXOpen.Features.VehicleDesign.BaseDataImportExportBuilder | Represents a NXOpen.Features.VehicleDesign.BaseDataImportExportBuilder builder used to import and export expressions from and to a spreadsheet |
NXOpen.Features.VehicleDesign.BaseDataLoadingBuilder | Represents a NXOpen.Features.VehicleDesign.BaseDataLoadingBuilder |
NXOpen.Features.VehicleDesign.BaseDataLoadingWheelBuilder | Represents a NXOpen.Features.VehicleDesign.BaseDataLoadingWheelBuilder |
NXOpen.Features.VehicleDesign.BaseDataPassengerBuilder | Represents a NXOpen.Features.VehicleDesign.BaseDataPassengerBuilder |
NXOpen.Features.VehicleDesign.BaseDataSourceBuilder | Represents a NXOpen.Features.VehicleDesign.BaseDataSourceBuilder builder, which set the base data source for work part in assembly context |
NXOpen.Features.VehicleDesign.BaseDataWheelBuilder | Represents a NXOpen.Features.VehicleDesign.BaseDataWheelBuilder |
NXOpen.Features.VehicleDesign.PendulumPlacementBuilder | This builder allows you to define the pendulum placement information for bumper pendulum features in vehicle design |
NXOpen.Features.VehicleDesign.SlopeBuilder | The builder to create slope feature |
NXOpen.Features.WaveInterfaceLinkerBuilder | Represents a WaveInterfacelinker Feature builder |
NXOpen.Fields.DisplayPropertiesBuilder | Represents a builder class for editing display properties of a NXOpen.Fields.Field |
NXOpen.Fields.SpatialMapBuilder | Represents a NXOpen.Fields.SpatialMap builder |
NXOpen.FileNew | Represents a NXOpen.FileNew |
NXOpen.FlatteningBuilder | Represents a FlatteningBuilder builder |
NXOpen.Formboard.FaceAnnotationBuilder | Builder for Face Annotation functionality used in formboard |
NXOpen.Formboard.FlipComponentBuilder | Builder for flip component operation used in formboard |
NXOpen.Formboard.FormboardLayoutBuilder | Class that performs the "layout" of Formboard geometry |
NXOpen.Formboard.LayoutLengthOptions | Defines the various options for determining the rounded lengths of formboard geometry during the layout or update process |
NXOpen.Formboard.ObjectAttributeReferenceBuilder | Builder for "object attribute" used in formboard which enbles user to create annotation in drafting functionality |
NXOpen.Formboard.OrientBranchBuilder | Builder for "Orient Branch" operation used in formboard |
NXOpen.Formboard.PathLengthAnnotationBuilder | TODO Class documentation |
NXOpen.Formboard.ShapeSegmentBuilder | Builder for Face Annotation functionality used in formboard |
NXOpen.Formboard.UpdateFormboardBuilder | Class that performs the "update" of Formboard geometry |
NXOpen.FourPointSurfaceBuilder | Represents a four point sheet body builder |
NXOpen.Gateway.BaseExplicitOrderBuilder | This is the NXOpen.Gateway.BaseExplicitOrderBuilder for the explicit order |
NXOpen.Annotations.PMIExplicitOrderBuilder | This is the NXOpen.Annotations.PMIExplicitOrderBuilder for the explicit order |
NXOpen.Gateway.CopyCutBuilder | Represents a NXOpen.Gateway.CopyCutBuilder |
NXOpen.Gateway.GenericFileNewBuilder | Represents a builder class that performs Generic File New operations |
NXOpen.Gateway.IGenericFileNewApplicationBuilder | Represents the class Application Builder |
NXOpen.Gateway.ImageCaptureBuilder | Represents a NXOpen.Gateway.ImageCaptureBuilder builder |
NXOpen.Gateway.PasteBuilder | Represents a NXOpen.Gateway.PasteBuilder |
NXOpen.GeometricAnalysis.CurveAnalysisCombsBuilder | This class handles the options setting for the curve analysis information (Curvature Combs) display |
NXOpen.GeometricAnalysis.CurveAnalysisInflectionsBuilder | This class handles the options setting for the curve analysis information (Inflections) display |
NXOpen.GeometricAnalysis.CurveAnalysisPeaksBuilder | This class handles the options setting for the curve analysis information (Peaks) display |
NXOpen.GeometricAnalysis.CurveContinuityBuilder | Represents a curve continuity builder |
NXOpen.GeometricAnalysis.CurveCurvatureAnalysisBuilder | Represents a NXOpen.GeometricAnalysis.CurveCurvatureAnalysis builder |
NXOpen.GeometricAnalysis.DeviationChecking | Represents a NXOpen.GeometricAnalysis.DeviationChecking |
NXOpen.GeometricAnalysis.DeviationGaugeBuilder | DeviationGaugeBuilder class |
NXOpen.GeometricAnalysis.DistanceAnalysisBuilder | Represents a Distance Analysis builder |
NXOpen.GeometricAnalysis.DraftAnalysisBuilder | Represents a Draft Analysis builder |
NXOpen.GeometricAnalysis.ExamineGeometry | Represents the Examine Geometry class |
NXOpen.GeometricAnalysis.FaceCurvatureAnalysisBuilder | Represents a NXOpen.GeometricAnalysis.FaceCurvatureAnalysisBuilder builder |
NXOpen.GeometricAnalysis.GapFlushnessBuilder | GapFlushnessBuilder class |
NXOpen.GeometricAnalysis.GeometricProperties | Represents the Geometric Properties class |
NXOpen.GeometricAnalysis.HighlightLinesAnalysisBuilder | Represents a NXOpen.GeometricAnalysis.HighlightLinesAnalysis builder |
NXOpen.GeometricAnalysis.LocalRadiusAnalysisBuilder | Represents a NXOpen.GeometricAnalysis.LocalRadiusAnalysis builder |
NXOpen.GeometricAnalysis.RadiusAnalysisBuilder | Represents a Radius Analysis builder |
NXOpen.GeometricAnalysis.ReflectionAnalysisBuilder | Represents a Reflection Analysis builder |
NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder | Represents a NXOpen.GeometricAnalysis.SectionAnalysisObject builder |
NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder | Represents a NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExObject builder |
NXOpen.GeometricAnalysis.SimpleInterference | Represents the Simple Interference object |
NXOpen.GeometricAnalysis.SlopeAnalysisBuilder | Represents a Slope Analysis builder |
NXOpen.GeometricAnalysis.SolidDensity | Represents a NXOpen.GeometricAnalysis.SolidDensity |
NXOpen.GeometricAnalysis.SurfaceContinuityAnalysisBuilder | Represents a NXOpen.GeometricAnalysis.SurfaceContinuityAnalysis builder |
NXOpen.GeometricAnalysis.SurfaceIntersectionBuilder | Represents a NXOpen.GeometricAnalysis.SurfaceIntersection builder |
NXOpen.GeometricUtilities.ConvertFeatureGroupsToModulesBuilder | Represents a NXOpen.GeometricUtilities.ConvertFeatureGroupsToModulesBuilder builder |
NXOpen.GeometricUtilities.FtmFixedCurvesBuilder | Represents a NXOpen.GeometricUtilities.FtmFixedCurvesBuilder builder |
NXOpen.GeometricUtilities.FtmTransformCurvesBuilder | Represents a NXOpen.GeometricUtilities.FtmTransformCurvesBuilder builder |
NXOpen.GeometricUtilities.FtmTransformPointsBuilder | Represents a NXOpen.GeometricUtilities.FtmTransformPointsBuilder builder |
NXOpen.GeometricUtilities.LocalUntrimBuilder | Represents a NXOpen.GeometricUtilities.LocalUntrimBuilder builder |
NXOpen.GeometricUtilities.MatchSurfaceBuilder | Represents a NXOpen.GeometricUtilities.MatchSurfaceBuilder builder |
NXOpen.GeometricUtilities.NestModuleBuilder | Represents a NXOpen.GeometricUtilities.NestModuleBuilder |
NXOpen.GeometricUtilities.PartModuleInputBuilder | Represents a NXOpen.GeometricUtilities.PartModuleInputBuilder |
NXOpen.GeometricUtilities.PartModuleOutputBuilder | Represents a NXOpen.GeometricUtilities.PartModuleOutputBuilder |
NXOpen.GeometricUtilities.PartModuleOutputBuilder1 | Represents a NXOpen.GeometricUtilities.PartModuleOutputBuilder1 |
NXOpen.GeometricUtilities.PartModuleRelationshipBuilder | Represents a Features.PartModule builder |
NXOpen.GeometricUtilities.PatternClockingBuilder | enables the ability to apply delta transforms on individual instances of a pattern within the pattern feature |
NXOpen.GeometricUtilities.PatternInstanceEditBuilder | pattern instance edit builder |
NXOpen.GeometricUtilities.PointSetAlignmentBuilder | This class performs a point set to point set alignment |
NXOpen.GeometricUtilities.PointsFromFileBuilder | Represents a NXOpen.GeometricUtilities.PointsFromFileBuilder builder read points from a text file with format * |
NXOpen.GeometricUtilities.ReduceSurfaceRadiusBuilder | Reduce Surface Radius Builder of Geometric Utilities |
NXOpen.GeometricUtilities.ReduceSurfaceRadiusFaceGroupBuilder | Reduce Surface Radius Face Group Builder of Geometric Utilities |
NXOpen.GeometricUtilities.RenameLinkedPartModulePartBuilder | Represents a Features.PartModule builder |
NXOpen.GeometricUtilities.RenewFeatureBuilder | Represents a RenewFeatureBuilder object |
NXOpen.GeometricUtilities.SnipIntoPatchesBuilder | Represents a NXOpen.GeometricUtilities.SnipIntoPatchesBuilder builder |
NXOpen.GeometricUtilities.UnnestModuleBuilder | Represents a NXOpen.GeometricUtilities.UnnestModuleBuilder |
NXOpen.GroupBuilder | Represents a NXOpen.GroupBuilder |
NXOpen.HumanHandsDialogBuilder | Dialog for creating and editing standalone/"disembodied" hand figures |
NXOpen.HumanPosturePredictionBuilder | Represents a Human Posture Prediction Builder |
NXOpen.Importer | Base class for importing data into the work part |
NXOpen.CGMImporter | Used to import a CGM file into the work part |
NXOpen.PartImporter | Used to import a part into the work part |
NXOpen.STLImporter | Used to import an STL file into the work part |
NXOpen.VRMLImporter | Used to import a VRML file into the work part |
NXOpen.InferredConstraintsBuilder | Represents a NXOpen.InferredConstraintsBuilder |
NXOpen.InterpartExpressionsBuilder | This class creates interpart expressions from the source part to the current work part via the naming rule defined |
NXOpen.Issue.IssueBriefcaseSynchronizeBuilder | Represents a NXOpen.Issue.IssueBriefcase synchronize builder |
NXOpen.Issue.IssueContentBuilder | Represents a NXOpen.Issue.IssueContent builder |
NXOpen.Issue.SnapshotSubsetBuilder | Used to create or edit issue snapshot subset |
NXOpen.Issue.SnapshotWorksetBuilder | Used to create or edit issue snapshot workset which is a container to hold all the corresponding parts to represent an issue |
NXOpen.ItemCacheMappedEntityBuilder | Generic journal methods for ItemCacheMappedEntityBuilder |
NXOpen.PhysicalMaterialBuilder | Represents a NXOpen.PhysicalMaterial builder |
NXOpen.JtCreator | Represents a NXOpen.JtCreator to be used when exporting the JT Data This class is created using NXOpen.PvtransManager |
NXOpen.Layout2d.AssemblyFromLayout2dBuilder | Represents a Builder for create assembly from Layout functionality which will create a * new assembly from the selected Layout |
NXOpen.Layout2d.ConvertLayoutToSheetBuilder | Represents a Builder for converting Layout to drawing sheet |
NXOpen.Layout2d.DefineComponentAnchorPointBuilder | Represents a Builder for Define Component Anchor Point functionality which will define the anchor * point location of a 2D Component instance |
NXOpen.Layout2d.DefineComponentBuilder | Represents a Builder for Define 2D component functionality which will define * a 2D Component and stores its definition in the Reuse Library |
NXOpen.Layout2d.ExportComponentHierarchyBuilder | Represents a Builder for export component 2D hierarchy |
NXOpen.Layout2d.InsertComponentBuilder | Represents a Builder for Insert Component functionality which will insert a 2D * Component instance in the active sketch |
NXOpen.Layout2d.LocalDefinitionFolderBuilder | Represents a NXOpen.Layout2d.LocalDefinitionFolderBuilder |
NXOpen.Layout2d.MakeComponentUniqueBuilder | Represents a Builder for Make 2D Component unique functionality which will create a * new definition of the selected 2D Component instance |
NXOpen.Layout2d.NewComponentBuilder | Represents a Builder for New 2D Component functionality which will create an empty 2D Component instance and stores its definition in the local 2D Component folder |
NXOpen.Layout2d.PublishComponentBuilder | Represents a Builder for Publish 2D Component functionality which will allow local definitions to be exported into external storage locations |
NXOpen.Layout2d.ReparentComponentBuilder | Represents a Builder for Reparent 2D Component functionality which will reparents * the selected 2D Component contents from another 2D Component definition |
NXOpen.Layout2d.ReplaceComponentBuilder | Represents a Builder for Replace 2D Component functionality which will replaces * the selected 2D Component contents from another 2D Component definition |
NXOpen.Layout2d.SmashComponentBuilder | Represents a Builder for Smash 2D Component functionality which will break instances * of 2D Components into its constituent pieces, we can have multiple committed objects |
NXOpen.LineDesigner.ColumnGridEquipmentBuilder | Represents a LineDesigner |
NXOpen.LineDesigner.ConnectionCreatorBuilder | |
NXOpen.LineDesigner.ConveyorStationFeatureBuilder | Represents a LineDesigner.ConveyorStationFeature builder |
NXOpen.LineDesigner.CoverFeatureBuilder | Represents a LineDesigner.CoverFeature builder |
NXOpen.LineDesigner.CreateFactoryElementBuilder | Represents a LineDesigner.CreateFactoryElement builder |
NXOpen.LineDesigner.CreateFenceBuilder | Represents a LineDesigner.CreateFence builder |
NXOpen.LineDesigner.CreateSystemBuilder | Represents a LineDesigner.CreateSystem builder |
NXOpen.LineDesigner.DisconnectConnectionBuilder | |
NXOpen.LineDesigner.ExportPlantToDWGBuilder | Represents a LineDesigner.ExportPlantToDWG builder |
NXOpen.LineDesigner.ExportToDWGBuilder | Represents a LineDesigner.ExportToDWG builder |
NXOpen.LineDesigner.FactoryCadGeoEquipmentAssemblyBuilder | |
NXOpen.LineDesigner.FactoryCadGeoEquipmentBuilder | |
NXOpen.LineDesigner.FloorEquipmentBuilder | |
NXOpen.LineDesigner.GateFeatureBuilder | Represents a LineDesigner.GateFeature builder |
NXOpen.LineDesigner.GlobalSelectionBuilder | Global Selection |
NXOpen.LineDesigner.ImportFactoryCadGeoBuilder | |
NXOpen.LineDesigner.InsertSheetBuilder | Represents a LineDesigner.InsertSheet builder |
NXOpen.LineDesigner.PlantProductionUnitCreatorBuilder | |
NXOpen.LineDesigner.PlatformEquipmentBuilder | |
NXOpen.LineDesigner.ProductionUnitCreatorBuilder | |
NXOpen.LineDesigner.RailOpeningFeatureBuilder | Represents a LineDesigner.RailOpeningFeature builder |
NXOpen.LineDesigner.RenameDialogeBuilder | |
NXOpen.LineDesigner.RenameItemRevisionBuilder | |
NXOpen.LineDesigner.ResizeConnectorBuilder | |
NXOpen.LineDesigner.SingleElementConveyorBuilder | |
NXOpen.LineDesigner.StairwayEquipmentBuilder | |
NXOpen.LinkedMirrorPartBuilder | builder class of LinkedMirrorPartBuilder |
NXOpen.ListCreator | Represents a NXOpen.ListCreator to be used when exporting the JT Data This class is created using NXOpen.PvtransManager |
NXOpen.MassPropertiesBuilder | Represents a NXOpen.MassPropertiesBuilder for calculating the weight of selected objects as well as informing the part that the assemblies weight property data needs to be updated on save |
NXOpen.MeasureBuilder | Represents a NXOpen.MeasureBuilder |
NXOpen.MeasureAngleBuilder | Represents a NXOpen.MeasureAngleBuilder |
NXOpen.MeasureBodyBuilder | Represents a NXOpen.MeasureBodyBuilder |
NXOpen.MeasureDistanceBuilder | Represents a NXOpen.MeasureDistanceBuilder |
NXOpen.Routing.RoutingMeasureDistanceBuilder | Represents a NXOpen.Routing.RoutingMeasureDistanceBuilder |
NXOpen.MeasureFaceBuilder | Represents a NXOpen.MeasureFaceBuilder |
NXOpen.MechanicalRouting.AssignCornerBuilder | Builder class for Assign Corner which creates corner |
NXOpen.MechanicalRouting.ConnectBuilder | the Builder for Connect Path |
NXOpen.MechanicalRouting.CreatePathBuilder | Represents NXOpen.MechanicalRouting.CreatePathBuilder |
NXOpen.MechanicalRouting.DynamicCutElbowBehaviorBuilder | Represents NXOpen.MechanicalRouting.DynamicCutElbowBehaviorBuilder |
NXOpen.MechanicalRouting.EditPlacementBuilder | the Builder to Edit Placement |
NXOpen.MechanicalRouting.EditPointBuilder | Represents NXOpen.MechanicalRouting.EditPointBuilder |
NXOpen.MechanicalRouting.InsulationBuilder | Represents NXOpen.MechanicalRouting.InsulationBuilder |
NXOpen.MechanicalRouting.ManageInlineBehaviorBuilder | Represents NXOpen.MechanicalRouting.ManageInlineBehaviorBuilder |
NXOpen.MechanicalRouting.MergeBuilder | the Builder to Merge Component |
NXOpen.MechanicalRouting.MovePathBuilder | Represents NXOpen.MechanicalRouting.MovePathBuilder |
NXOpen.MechanicalRouting.PartPlacementBuilder | Represents NXOpen.MechanicalRouting.PartPlacementBuilder |
NXOpen.MechanicalRouting.PathTransitionBuilder | Represents NXOpen.MechanicalRouting.PathTransitionBuilder |
NXOpen.MechanicalRouting.PathTransitionListManagerBuilder | Represents NXOpen.MechanicalRouting.PathTransitionListManagerBuilder |
NXOpen.MechanicalRouting.PipingComponentFileBuilder | the Builder for PipingComponentFile data |
NXOpen.MechanicalRouting.SplitBuilder | the Builder to Assign Discontinuity for the stocks |
NXOpen.MechanicalRouting.StockBuilder | Builder for creating/editing stocks |
NXOpen.MechanicalRouting.TransformBlockBuilder | Represents NXOpen.MechanicalRouting.TransformBlockBuilder |
NXOpen.Mechatronics.AddComponentBuilder | Represents a NXOpen.Mechatronics.AddComponentBuilder |
NXOpen.Mechatronics.AlignBodyBuilder | Represents a NXOpen.Mechatronics.AlignBody builder |
NXOpen.Mechatronics.AnimationConversionBuilder | Represents a Mechatronics.AnimationConversionBuilder builder |
NXOpen.Mechatronics.CamProfileBuilder | Represents a NXOpen.Mechatronics.CamProfile builder |
NXOpen.Mechatronics.ChainJointBuilder | Represents a NXOpen.Mechatronics.ChainJointBuilder |
NXOpen.Mechatronics.ChangeOwnerBuilder | Represents a NXOpen.Mechatronics.ChangeOwnerBuilder |
NXOpen.Mechatronics.CollisionMaterialBuilder | Represents a NXOpen.Mechatronics.CollisionMaterial builder |
NXOpen.Mechatronics.CollisionShapeBuilder | This is an abstract class, and cannot be created |
NXOpen.Mechatronics.CollisionBodyBuilder | Represents a NXOpen.Mechatronics.CollisionBodyBuilder |
NXOpen.Mechatronics.CollisionSensorBuilder | Represents a NXOpen.Mechatronics.CollisionSensor builder |
NXOpen.Mechatronics.ConvertFromMTBBuilder | Represents a NXOpen.Mechatronics.ConvertFromMTBBuilder |
NXOpen.Mechatronics.DependencyCreatorBuilder | Represents a NXOpen.Mechatronics.DependencyCreatorBuilder builder |
NXOpen.Mechatronics.DisplayChangerBuilder | Represents a NXOpen.Mechatronics.DisplayChanger builder |
NXOpen.Mechatronics.DistanceSensorBuilder | Represents a NXOpen.Mechatronics.DistanceSensor builder |
NXOpen.Mechatronics.DynamicObjectTableBuilder | Represents a NXOpen.Mechatronics.DynamicObjectTableBuilder builder |
NXOpen.Mechatronics.ECADExportBuilder | Represents a NXOpen.Mechatronics.ECADExportBuilder |
NXOpen.Mechatronics.ECADImportBuilder | Represents a NXOpen.Mechatronics.ECADImportBuilder |
NXOpen.Mechatronics.ElectricalPartBuilder | Represents a NXOpen.Mechatronics.ElectricalPart builder |
NXOpen.Mechatronics.ExportSensorsActuatorsBuilder | Represents a NXOpen.Mechatronics.ExportSensorsActuatorsBuilder |
NXOpen.Mechatronics.ExpressionBlockBuilder | Represents a NXOpen.Mechatronics.ExpressionBlockBuilder builder |
NXOpen.Mechatronics.ExternalConnectionBuilder | Represents a NXOpen.Mechatronics.ExternalConnection builder |
NXOpen.Mechatronics.ExternalConnectionElementBuilder | Represents a NXOpen.Mechatronics.ExternalConnectionElementBuilder builder |
NXOpen.Mechatronics.ExternalSignalConfigurationBuilder | Represents a NXOpen.Mechatronics.ExternalSignalConfigurationBuilder |
NXOpen.Mechatronics.GanttExportPLCopenBuilder | Represents a NXOpen.Mechatronics.GanttOperationObject builder |
NXOpen.Mechatronics.GanttLinkerBuilder | Represents a NXOpen.Mechatronics.GanttLinkerBuilder |
NXOpen.Mechatronics.GanttOperationBuilder | Represents a NXOpen.Mechatronics.GanttOperationBuilder builder |
NXOpen.Mechatronics.GanttOperationConditionBuilder | Represents a NXOpen.Mechatronics.GanttOperationConditionBuilder |
NXOpen.Mechatronics.GanttOperationParameterBuilder | Represents a NXOpen.Mechatronics.GanttOperationParameterBuilder |
NXOpen.Mechatronics.MATLABClientBuilder | Represents a NXOpen.Mechatronics.MATLABClientBuilder |
NXOpen.Mechatronics.MATLABSignalConnectionBuilder | Represents a Mechatronics.MATLABSignalConnectionBuilder |
NXOpen.Mechatronics.MCDSignalServerConfigurationBuilder | Represents a NXOpen.Mechatronics.MCDSignalServerConfigurationBuilder |
NXOpen.Mechatronics.MotionProfileBuilder | Represents a NXOpen.Mechatronics.MotionProfile builder |
NXOpen.Mechatronics.ObjectInformationBuilder | Represents a NXOpen.Mechatronics.ObjectInformationBuilder |
NXOpen.Mechatronics.ObjectSinkBuilder | Represents a NXOpen.Mechatronics.ObjectSink builder |
NXOpen.Mechatronics.ObjectSourceBuilder | Represents a NXOpen.Mechatronics.ObjectSource builder |
NXOpen.Mechatronics.OPCClientBuilder | Represents a NXOpen.Mechatronics.OPCClientBuilder |
NXOpen.Mechatronics.OPCUAClientBuilder | Represents a NXOpen.Mechatronics.OPCUAClientBuilder builder |
NXOpen.Mechatronics.ParameterStockBuilder | Represents a NXOpen.Mechatronics.ParameterStockBuilder builder |
NXOpen.Mechatronics.PhysicsConstraintBuilder | This is an abstract class, and cannot be created |
NXOpen.Mechatronics.AccelerometerBuilder | Represents a NXOpen.Mechatronics.Accelerometer builder |
NXOpen.Mechatronics.BreakingConstraintBuilder | Represents a NXOpen.Mechatronics.BreakingConstraint builder |
NXOpen.Mechatronics.ChangeMaterialBuilder | Represents a NXOpen.Mechatronics.ChangeMaterial builder |
NXOpen.Mechatronics.CouplingBuilder | This is an abstract class, and cannot be created |
NXOpen.Mechatronics.CamBuilder | Represents a NXOpen.Mechatronics.Cam builder |
NXOpen.Mechatronics.GearBuilder | Represents a NXOpen.Mechatronics.Gear builder |
NXOpen.Mechatronics.RackPinionBuilder | Represents a Mechatronics.RackPinion builder |
NXOpen.Mechatronics.ThreeJointCouplerBuilder | Represents the builder class to create or edit a NXOpen.Mechatronics.ThreeJointCoupler object |
NXOpen.Mechatronics.ForceTorqueControlBuilder | ForceTorque control builder for building a ForceTorque object |
NXOpen.Mechatronics.GenericSensorBuilder | Represents a NXOpen.Mechatronics.GenericSensor builder |
NXOpen.Mechatronics.GraphControlBuilder | Represents a NXOpen.Mechatronics.GraphControl builder |
NXOpen.Mechatronics.HydraulicCylinderBuilder | Represents a NXOpen.Mechatronics.HydraulicCylinder builder |
NXOpen.Mechatronics.HydraulicValveBuilder | Represents a NXOpen.Mechatronics.HydraulicValve builder |
NXOpen.Mechatronics.InclinometerBuilder | Represents a NXOpen.Mechatronics.Inclinometer builder |
NXOpen.Mechatronics.LimitSwitchBuilder | Represents a NXOpen.Mechatronics.LimitSwitch builder |
NXOpen.Mechatronics.ObjectTransformerBuilder | Represents a NXOpen.Mechatronics.ObjectTransformer builder |
NXOpen.Mechatronics.PneumaticCylinderBuilder | Represents a NXOpen.Mechatronics.PneumaticCylinder builder |
NXOpen.Mechatronics.PneumaticValveBuilder | Represents a NXOpen.Mechatronics.PneumaticValve builder |
NXOpen.Mechatronics.PositionControlBuilder | Represents a NXOpen.Mechatronics.PositionControlBuilder |
NXOpen.Mechatronics.PositionSensorBuilder | Represents a NXOpen.Mechatronics.PositionSensor builder |
NXOpen.Mechatronics.PreventCollisionBuilder | Represents a NXOpen.Mechatronics.PreventCollision builder |
NXOpen.Mechatronics.RelayBuilder | Represents a NXOpen.Mechatronics.Relay builder |
NXOpen.Mechatronics.SpeedControlBuilder | Represents a NXOpen.Mechatronics.SpeedControl builder |
NXOpen.Mechatronics.SpringDamperBuilder | Represents a NXOpen.Mechatronics.SpringDamper builder |
NXOpen.Mechatronics.TransmitterEntryBuilder | Represents a NXOpen.Mechatronics.TransmitterEntry builder |
NXOpen.Mechatronics.TransmitterExitBuilder | Represents a NXOpen.Mechatronics.TransmitterExit builder |
NXOpen.Mechatronics.VelocitySensorBuilder | Represents a NXOpen.Mechatronics.VelocitySensor builder |
NXOpen.Mechatronics.PhysicsJointBuilder | Represents a base builder for Physics Joints |
NXOpen.Mechatronics.AngularLimitJointBuilder | Represents a NXOpen.Mechatronics.AngularLimitJoint builder |
NXOpen.Mechatronics.AngularSpringJointBuilder | Represents a NXOpen.Mechatronics.AngularSpringJoint builder |
NXOpen.Mechatronics.BallJointBuilder | Represents a NXOpen.Mechatronics.BallJoint builder |
NXOpen.Mechatronics.CurveOnCurveJointBuilder | Represents a NXOpen.Mechatronics.CurveOnCurveJoint builder |
NXOpen.Mechatronics.CylindricalJointBuilder | Represents a NXOpen.Mechatronics.CylindricalJoint builder |
NXOpen.Mechatronics.FixedJointBuilder | Represents a NXOpen.Mechatronics.FixedJoint builder |
NXOpen.Mechatronics.HingeJointBuilder | Represents a NXOpen.Mechatronics.HingeJoint builder |
NXOpen.Mechatronics.LinearLimitJointBuilder | Represents a NXOpen.Mechatronics.LinearLimitJoint builder |
NXOpen.Mechatronics.LinearSpringJointBuilder | Represents a NXOpen.Mechatronics.LinearSpringJoint builder |
NXOpen.Mechatronics.PathConstraintJointBuilder | Represents a NXOpen.Mechatronics.PathConstraintJoint builder |
NXOpen.Mechatronics.PlanarJointBuilder | Represents a NXOpen.Mechatronics.PlanarJoint builder |
NXOpen.Mechatronics.PointOnCurveJointBuilder | Represents a NXOpen.Mechatronics.PointOnCurveJoint builder |
NXOpen.Mechatronics.ScrewJointBuilder | Represents a NXOpen.Mechatronics.ScrewJoint builder |
NXOpen.Mechatronics.SlidingJointBuilder | Represents a NXOpen.Mechatronics.SlidingJoint builder |
NXOpen.Mechatronics.VirtualAxisBuilder | Represents a NXOpen.Mechatronics.VirtualAxis builder |
NXOpen.Mechatronics.PlcSimAdvClientBuilder | Represents a NXOpen.Mechatronics.PlcSimAdvClientBuilder builder |
NXOpen.Mechatronics.PreferencesBuilder | Represents a NXOpen.Mechatronics.PreferencesBuilder builder |
NXOpen.Mechatronics.ProfinetClientBuilder | Represents a Mechatronics.ProfinetClientBuilder builder |
NXOpen.Mechatronics.ProxyObjectBuilder | Represents a NXOpen.Mechatronics.ProxyObjectBuilder |
NXOpen.Mechatronics.AdapterSignalBuilder | Represents a NXOpen.Mechatronics.AdapterSignalBuilder |
NXOpen.Mechatronics.ProxyObjectParameterBuilder | Represents a NXOpen.Mechatronics.ProxyObjectParameterBuilder |
NXOpen.Mechatronics.ProxyOverrideObjectBuilder | Represents a NXOpen.Mechatronics.ProxyOverrideObjectBuilder |
NXOpen.Mechatronics.ReadWriteDeviceBuilder | Represents a NXOpen.Mechatronics.ReadWriteDeviceBuilder |
NXOpen.Mechatronics.ReplacePhysicsBuilder | Represents a NXOpen.Mechatronics.ReplacePhysicsBuilder builder |
NXOpen.Mechatronics.RigidBodyBuilder | Represents a NXOpen.Mechatronics.RigidBodyBuilder |
NXOpen.Mechatronics.RuntimeBehaviorBuilder | Represents a NXOpen.Mechatronics.RuntimeBehaviorBuilder |
NXOpen.Mechatronics.RuntimeFormulaBuilder | Represents a Mechatronics.RuntimeFormulaBuilder |
NXOpen.Mechatronics.AdapterFormulaBuilder | Represents a NXOpen.Mechatronics.AdapterFormulaBuilder |
NXOpen.Mechatronics.ExpressionBlockFormulaBuilder | Represents a Mechatronics.ExpressionBlockFormulaBuilder |
NXOpen.Mechatronics.RuntimeFormulaParameterBuilder | Represents a NXOpen.Mechatronics.RuntimeFormulaParameterBuilder builder |
NXOpen.Mechatronics.RuntimeNCBuilder | Represents a NXOpen.Mechatronics.RuntimeNCBuilder |
NXOpen.Mechatronics.SCOUTExportBuilder | Represents a NXOpen.Mechatronics.SCOUTExportBuilder |
NXOpen.Mechatronics.SCOUTImportBuilder | Represents a NXOpen.Mechatronics.SCOUTImportBuilder , Nothing happened and no object returned when commit this builder |
NXOpen.Mechatronics.SensorsActuatorsListBuilder | Represents a NXOpen.Mechatronics.SensorsActuatorsListBuilder |
NXOpen.Mechatronics.SHMConfigurationBuilder | Represents a NXOpen.Mechatronics.SHMConfigurationBuilder builder |
NXOpen.Mechatronics.SHMSignalClientBuilder | Represents a NXOpen.Mechatronics.SHMSignalClientBuilder builder |
NXOpen.Mechatronics.SHMSignalConnectionBuilder | Represents a NXOpen.Mechatronics.SHMSignalConnectionBuilder |
NXOpen.Mechatronics.SHMSignalProviderBuilder | Represents a NXOpen.Mechatronics.SHMSignalProviderBuilder |
NXOpen.Mechatronics.SignalAdapterBuilder | Represents a NXOpen.Mechatronics.SignalAdapterBuilder |
NXOpen.Mechatronics.SignalBuilder | Represents a NXOpen.Mechatronics.SignalBuilder builder |
NXOpen.Mechatronics.SignalConnectionBuilder | Represents a NXOpen.Mechatronics.SignalConnectionBuilder |
NXOpen.Mechatronics.SignalMappingBuilder | Represents a NXOpen.Mechatronics.SignalMappingBuilder |
NXOpen.Mechatronics.SignalMappingConnectionBuilder | Represents a Mechatronics.SignalMappingConnectionBuilder |
NXOpen.Mechatronics.SymbolTableBuilder | Represents a NXOpen.Mechatronics.SymbolTableBuilder builder |
NXOpen.Mechatronics.SystemObjectBuilder | Represents a NXOpen.Mechatronics.SystemObject builder |
NXOpen.Mechatronics.FunctionObjectBuilder | Represents a NXOpen.Mechatronics.FunctionObjectBuilder |
NXOpen.Mechatronics.LogicObjectBuilder | Represents a NXOpen.Mechatronics.LogicObject builder |
NXOpen.Mechatronics.RequirementBuilder | Represents a NXOpen.Mechatronics.Requirement builder |
NXOpen.Mechatronics.TagFormBuilder | Represents a NXOpen.Mechatronics.TagFormBuilder |
NXOpen.Mechatronics.TagTableBuilder | Represents a NXOpen.Mechatronics.TagTableBuilder builder |
NXOpen.Mechatronics.TCPClientBuilder | Represents a Mechatronics.TCPClientBuilder builder |
NXOpen.Mechatronics.TCPSignalServerBuilder | Represents a Mechatronics.TCPSignalServerBuilder builder |
NXOpen.Mechatronics.TracerBuilder | Represents a Mechatronics.Tracer builder |
NXOpen.Mechatronics.TransportSurfaceBuilder | Represents a NXOpen.Mechatronics.TransportSurfaceBuilder |
NXOpen.Mechatronics.UDPSignalClientBuilder | Represents a Mechatronics.UDPSignalClientBuilder builder |
NXOpen.Mechatronics.UDPSignalServerBuilder | Represents a Mechatronics.UDPSignalServerBuilder builder |
NXOpen.Mfg.AM.MeshProperties | Represents a mesh properties builder |
NXOpen.Mfg.AM.Nester3D | Interface for AM Nesting Dialog Builder |
NXOpen.Mfg.AM.SupportBuilder | Represents a Mfg.AM.Support builder |
NXOpen.Motion.AddSubmechanismBuilder | Represents a builder class that performs add submechanism in current context |
NXOpen.Motion.AnalyticalContactPropertyBuilder | Represents a Motion.AnalyticalContactProperty builder |
NXOpen.Motion.BodyContactBuilder | Represents a NXOpen.Motion.BodyContactBuilder |
NXOpen.Motion.CurveContactBuilder | Represents a NXOpen.Motion.CurveContactBuilder |
NXOpen.Motion.GraphBuilder | Represents a NXOpen.Motion.GraphBuilder , only creation is supported |
NXOpen.Motion.MarkerBuilder | Represents a builder of Marker |
NXOpen.Motion.MotionBuilder | This builder class is used to create or edit NXOpen.Motion.MotionObject |
NXOpen.Motion.AdvancedSolutionBuilder | Represents a NXOpen.Motion.AdvancedSolution builder |
NXOpen.Motion.AnalyticalContactBuilder | Represents a Motion.AnalyticalContact builder |
NXOpen.Motion.BaseSectionBuilder | Represents a Motion.BaseSectionBuilder |
NXOpen.Motion.StandardSectionBuilder | Represents a Motion.StandardSectionBuilder |
NXOpen.Motion.UserDefinedSectionBuilder | Represents a Motion.UserDefinedSectionBuilder |
NXOpen.Motion.BeamForceBuilder | Represents a Motion.BeamForceBuilder builder |
NXOpen.Motion.BushingBuilder | Represents a Motion BushingBuilder |
NXOpen.Motion.ConnectorBuilder | Represents ConnectorBuilder |
NXOpen.Motion.DamperBuilder | Represents a DamperBuilder |
NXOpen.Motion.SpringBuilder | Represents a SpringBuilder |
NXOpen.Motion.ControlInputBuilder | Represents a Motion.ControlInput builder |
NXOpen.Motion.ControlInputPortBuilder | Represents a Motion.ControlPort builder specific to control input element |
NXOpen.Motion.ControlOutputBuilder | Represents a Motion.ControlOutput builder |
NXOpen.Motion.CouplerBuilder | Represents a NXOpen.Motion.CouplerBuilder |
NXOpen.Motion.CouplerCableBuilder | Represents a NXOpen.Motion.CouplerCableBuilder |
NXOpen.Motion.CouplerGearBuilder | Represents a NXOpen.Motion.CouplerGearBuilder |
NXOpen.Motion.CouplerRckpnBuilder | Represents a NXOpen.Motion.CouplerRckpnBuilder |
NXOpen.Motion.CurveOnCurveBuilder | Represents a NXOpen.Motion.CurveOnCurveBuilder |
NXOpen.Motion.FlexBodyBuilder | Represents a NXOpen.Motion.FlexBody builder |
NXOpen.Motion.GeneralCouplerBuilder | Represents a NXOpen.Motion.GeneralCouplerBuilder |
NXOpen.Motion.GraphObjectBuilder | Represents a NXOpen.Motion.GraphObjectBuilder , only creation is supported |
NXOpen.Motion.JointBuilder | This builder class is used to create or edit NXOpen.Motion.Joint objects |
NXOpen.Motion.JointDriverBuilder | Represents a NXOpen.Motion.JointDriverBuilder |
NXOpen.Motion.LinkBuilder | Represents a NXOpen.Motion.LinkBuilder |
NXOpen.Motion.LinkCouplerBuilder | Represents a NXOpen.Motion.LinkCouplerBuilder |
NXOpen.Motion.LinkDriverBuilder | Represents a NXOpen.Motion.LinkDriverBuilder |
NXOpen.Motion.LoadTransferBuilder | Represents a NXOpen.Motion.LoadTransferBuilder |
NXOpen.Motion.MechatronicsBuilder | Represents a Motion.Mechatronics builder |
NXOpen.Motion.MotionSensorBuilder | Represents a NXOpen.Motion.MotionSensorBuilder |
NXOpen.Motion.MotorBuilder | This builder class is used to create or edit NXOpen.Motion.Motor |
NXOpen.Motion.PMDCMotorBuilder | Represents a NXOpen.Motion.PMDCMotorBuilder |
NXOpen.Motion.PlantInputBuilder | Represents a NXOpen.Motion.PlantInput builder |
NXOpen.Motion.PlantOutputBuilder | Represents a NXOpen.Motion.PlantOutput builder |
NXOpen.Motion.PointOnCurveBuilder | Represents a NXOpen.Motion.PointOnCurveBuilder |
NXOpen.Motion.PointOnSurfaceBuilder | Represents a NXOpen.Motion.PointOnSurfaceBuilder |
NXOpen.Motion.RoadBuilder | Represents a NXOpen.Motion.RoadBuilder |
NXOpen.Motion.ScalarForceBuilder | Represents a NXOpen.Motion.ScalarForceBuilder |
NXOpen.Motion.ScalarTorqueBuilder | Represents a NXOpen.Motion.ScalarTorqueBuilder |
NXOpen.Motion.SignalChartBuilder | Represents a NXOpen.Motion.SignalChartBuilder |
NXOpen.Motion.SplineBeamBuilder | Represents a Motion.SplineBeamBuilder builder |
NXOpen.Motion.SplineBeamPropertyBuilder | Represents a Motion.SplineBeamPropertyBuilder builder |
NXOpen.Motion.TextBasedElementBuilder | Represents a NXOpen.Motion.TextBasedElementBuilder builder |
NXOpen.Motion.TireBuilder | Represents a Motion.Tire builder |
NXOpen.Motion.TirePropertyBuilder | Represents a Builder base class for Tire Properties |
NXOpen.Motion.TirePropertyBasicBuilder | Represents a builder for a Motion.TirePropertyBasic |
NXOpen.Motion.TirePropertyCdBuilder | Represents a Motion.TirePropertyCd builder |
NXOpen.Motion.TirePropertyFtBuilder | Represents a Builder for Motion Ftire Tire Property |
NXOpen.Motion.TirePropertyMotorcycleBuilder | Represents a TirePropertyMotorcycleBuilder builder |
NXOpen.Motion.TirePropertyNonInertialBuilder | Represents a builder for a Non-inertial Tire Property |
NXOpen.Motion.TirePropertyTnoBuilder | Represents a Builder for Motion TNO Tire Property |
NXOpen.Motion.VectorForceBuilder | Represents a NXOpen.Motion.VectorForceBuilder |
NXOpen.Motion.VectorTorqueBuilder | Represents a NXOpen.Motion.VectorTorqueBuilder |
NXOpen.Motion.MotionSolutionBuilder | Represents a NXOpen.Motion.MotionSolutionBuilder |
NXOpen.Motion.PackagingBuilder | This class an abstract class and base class for NXOpen.Motion.PackagingMeasureBuilder , NXOpen.Motion.PackagingTraceBuilder and NXOpen.Motion.PackagingInterferenceBuilder |
NXOpen.Motion.PackagingInterferenceBuilder | This the builder class to create or edit an Interference object |
NXOpen.Motion.PackagingMeasureBuilder | This is the builder class to create or edit a Measure object |
NXOpen.Motion.PackagingTraceBuilder | This is the builder class to create or edit a Trace object |
NXOpen.Motion.PhysicsConversionBuilder | Represents a NXOpen.Motion.PhysicsConversionBuilder builder |
NXOpen.Motion.ResultMeasureBuilder | Represents a NXOpen.Motion.ResultMeasure builder |
NXOpen.Motion.SubmechanismPositionerBuilder | Represents a Motion.SubmechanismPositioner builder |
NXOpen.MovieSettingsBuilder | This class is the builder for the Movie Settings |
NXOpen.ObjectGeneralPropertiesBuilder | Represents an NXOpen.ObjectGeneralPropertiesBuilder to be used for modifying the names and properties of objects |
NXOpen.ObjectSelector | Represents a NXOpen.ObjectSelector to be used when exporting the the selected objects from NX part |
NXOpen.ObjectTypeSelector | Represents a NXOpen.ObjectTypeSelector to be used when filter out the objects based on the type during import/export |
NXOpen.Optimization.DesignStudyAttributeBuilder | Represents a NXOpen.Optimization.DesignStudyAttributeBuilder |
NXOpen.Optimization.DesignStudyBuilder | Represents a NXOpen.Optimization.DesignStudyBuilder |
NXOpen.Optimization.MapleExpBuilder | Represents a NXOpen.Optimization.MapleExpBuilder |
NXOpen.Optimization.MathIntegrationExpBuilder | Represents a NXOpen.Optimization.MathIntegrationExpBuilder |
NXOpen.Optimization.OptimizationAttributeBuilder | Represents a NXOpen.Optimization.OptimizationAttributeBuilder |
NXOpen.Optimization.OptimizationBuilder | Represents a NXOpen.Optimization.OptimizationBuilder |
NXOpen.PasteSpecialBuilder | Represents a NXOpen.PasteSpecialBuilder |
NXOpen.PDM.AttributeGroupReviseBuilder | Represents an attribute group revise builder |
NXOpen.PDM.ConfigurationContextBuilder | Represents a NXOpen.PDM.ConfigurationContextBuilder builder |
NXOpen.PDM.EffectivityAttributePropertiesBuilder | Represents an NXOpen.PDM.EffectivityAttributePropertiesBuilder to be used for creating effectivity attributes |
NXOpen.PDM.ExportWorksetForReferenceBuilder | Represents a builder class that performs Create operations |
NXOpen.PDM.ObjectCreateBuilder | Represents a builder class that perofrms create operation |
NXOpen.PDM.PartOperationBuilder | Represents a builder class that performs various design element operations |
NXOpen.PDM.SmartSaveBuilder | TODO: Add a documentation comment describing this class |
NXOpen.PhysMat.PhysicalMaterialAssignBuilder | Represents a Physical Material Assign Builder |
NXOpen.PhysMat.PhysicalMaterialLibMgrBuilder | Represents a NXOpen.PhysMat.PhysicalMaterialLibMgrBuilder builder |
NXOpen.PhysMat.PhysicalMaterialListBuilder | This builder is used by the Materials list component that allows copying, editing, deleting |
NXOpen.PID.BulkEditBuilder | Represents a BulkEditBuilder to edit bulk of objects |
NXOpen.PID.DesignContextBuilder | Represents a builder class that performs PID Design Context operations |
NXOpen.PID.EquipmentBuilder | Builder used to model a piece of Equipment |
NXOpen.PID.FlowDirectionArrowBuilder | Represents FlowDirectionArrowBuilder |
NXOpen.PID.LibraryAuthoringBuilder | Represents a LibraryAuthoringBuilder |
NXOpen.PID.OffSheetConnectorBuilder | Builder used to model a piece of Off Sheet Connector |
NXOpen.PID.PipeBuilder | Represents a PipeBuilder |
NXOpen.PID.PortEquipmentBuilder | Builder used to model a piece of PortEquipment |
NXOpen.PID.PreferencesBuilder | Represents a PreferencesBuilder |
NXOpen.PID.SheetTemplateBuilder | Represents a NXOpen.PID.SheetTemplateBuilder builder, and the builder is used to model a sheet template |
NXOpen.Placement.PlacementEngineBuilder | Represents a builder class that will create and work with placement solutions |
NXOpen.PLAS.RunBuilder | Represents a RunBuilder |
NXOpen.PlotBuilder | Represents a NXOpen.PlotBuilder |
NXOpen.Positioning.ComponentConstraintGroupBuilder | Represents a NXOpen.Positioning.ComponentConstraintGroupBuilder builder |
NXOpen.Preferences.LoadDraftingStandardBuilder | Represents a NXOpen.Preferences.LoadDraftingStandardBuilder |
NXOpen.Preferences.ViewSection | Records / queries view section preferences |
NXOpen.PressLineSimulation.ConvertFromDieValidationBuilder | Use this builder to convert a simulation job done in Die Validation to Press Line Simulation |
NXOpen.PressLineSimulation.DrivenCamBuilder | Represents a PressLineSimulation |
NXOpen.PressLineSimulation.CushionControlBuilder | Represents a PressLineSimulation.CushionControl builder |
NXOpen.PressLineSimulation.HydraulicLifterBuilder | Represents a PressLineSimulation.HydraulicLifterBuilder builder |
NXOpen.PressLineSimulation.LinearCamBuilder | Represents a PressLineSimulation.LinearCamBuilder builder |
NXOpen.PressLineSimulation.RotaryCamBuilder | Represents a PressLineSimulation.RotaryCamBuilder builder |
NXOpen.PressLineSimulation.HydraulicLifterListBuilder | Represents a PressLineSimulation.HydraulicLifterListBuilder builder |
NXOpen.PressLineSimulation.LinearCamListBuilder | Represents a PressLineSimulation.LinearCamListBuilder builder |
NXOpen.PressLineSimulation.MachineAdjustmentBuilder | Use this class to configure the machine adjustment axes of the press model |
NXOpen.PressLineSimulation.MachineAdjustmentBuilderListBuilder | Use this class to obtain a list of PressLineSimulation.MachineAdjustmentBuilder objects |
NXOpen.PressLineSimulation.MotionCurvesBuilder | Represents a PressLineSimulation.MotionCurvesBuilder builder |
NXOpen.PressLineSimulation.MountPointBuilder | Use this class to mount tools, tooling and parts to interfaces |
NXOpen.PressLineSimulation.MountPointBuilderListBuilder | Use this class to obtain a list of PressLineSimulation.MountPointBuilder objects |
NXOpen.PressLineSimulation.RotaryCamListBuilder | Represents a PressLineSimulation.RotaryCamListBuilder builder |
NXOpen.PressLineSimulation.SetPressModelBuilder | A builder to setup the press model |
NXOpen.PressLineSimulation.UserMotionBuilder | Represents a PressLineSimulation.UserMotionBuilder builder |
NXOpen.PressLineSimulation.UserMotionListBuilder | Represents a PressLineSimulation.UserMotionListBuilder builder |
NXOpen.PreviewPropertiesBuilder | Represents a NXOpen.PreviewPropertiesBuilder to be used for creating and storing previews |
NXOpen.Print3dBuilder | This class sends the 3d model for 3dprinting |
NXOpen.PrintBuilder | Represents a NXOpen.PrintBuilder |
NXOpen.PrintPDFBuilder | Represents a NXOpen.PrintPDFBuilder to be used when exporting the Current Display or selected sheets to a PDF document |
NXOpen.ProeImporter | Represents a NXOpen.ProeImporter to be used when importing the ProE Data This class is created using NXOpen.DexManager |
NXOpen.ReplaceExpressionsBuilder | This class creates Replace expressions from the source part to the current work part via the naming rule defined |
NXOpen.Report.CommandBuilder | Represents a NXOpen.Report.CommandBuilder |
NXOpen.Routing.AddFontBuilder | Builder for creating an add font user interface dialogue |
NXOpen.Routing.AlignStockBuilder | Represents a Routing.AlignStockBuilder Builder for aligning non-circular stocks |
NXOpen.Routing.AssignCornerBuilder | Builder class for Assign Corner which creates corner |
NXOpen.Routing.AssignDiscontinuityBuilder | the Builder to Assign Discontinuity for the stocks |
NXOpen.Routing.AssignPathBuilder | Assigns path to a broken routing run |
NXOpen.Routing.AssignTangencyBuilder | Represents a NXOpen.Routing.AssignTangencyBuilder object |
NXOpen.Routing.AttributeMembersBuilder | Creates attibutemembers builder object to add to the search criteria list used by FindByAttributesBuilder |
NXOpen.Routing.BranchPathNumberingBuilder | Builder class for Branch Path Numbering |
NXOpen.Routing.BulkReplacementBuilder | Builder class for Bulk Replacement which manages replacement operations on Routing objects |
NXOpen.MechanicalRouting.BulkReplacementBuilder | Builder class for Bulk Replacement which manages replacement operations on design elements |
NXOpen.Routing.ClockPartBuilder | Builder class for clock part object |
NXOpen.Routing.CompareRunsBuilder | Represents a NXOpen.Routing.CompareRunsBuilder , used to compare runs in the work part to the ones in another part, or to runs defined in xml files gathered in a folder (native mode) or on an item revision (managed mode) |
NXOpen.Routing.ConnectedCurvesBuilder | Builder for creating automatically creating segments on end-to-end connected curves |
NXOpen.Routing.ConnectPathBuilder | Represents a NXOpen.Routing.ConnectPathBuilder |
NXOpen.Routing.CopeCornerBuilder | Builder class for Cope Corner object |
NXOpen.Routing.CreateFabricationBuilder | Builder class to fabricate subassembly from standard parts, path segments, stock, and other routing objects within the current routing assembly |
NXOpen.Routing.DefineRunBuilder | Builder Class for DefineRun Object |
NXOpen.Routing.DeleteFontsBuilder | Represents a NXOpen.Routing.DeleteFontsBuilder |
NXOpen.Routing.DeleteGapsBuilder | Represents a NXOpen.Routing.DeleteGapsBuilder |
NXOpen.Routing.DeleteObjectsBuilder | Represents a NXOpen.Routing.DeleteObjectsBuilder |
NXOpen.Routing.DesignRuleViolationViewer | This class can be used to set the violation id, update text for overridding the violation and update the user name used to override the violation |
NXOpen.Routing.DivisionsBuilder | Represents a NXOpen.Routing.DivisionsBuilder |
NXOpen.Routing.DuctReinforcementBuilder | Builder for creating/editing duct reinforcements |
NXOpen.Routing.DuctSizeCalculatorBuilder | Builder to perform calculations of the duct which is to be used in the HVAC applications |
NXOpen.Routing.EditBendAngleBuilder | |
NXOpen.Routing.EditCharacteristicsBuilder | Builder to edit required and optional characteristics of Routing.Stock or Assemblies.Component as defined in the application view file |
NXOpen.Routing.EditLineSegmentBuilder | Builder for the "Edit Line Segment" operation |
NXOpen.Routing.EditPlacePartBuilder | |
NXOpen.Routing.ElbowSnapSettings | Helper object used the by NXOpen.Routing.LinearPathBuilder builder |
NXOpen.Routing.Electrical.AssignProxyBuilder | Represents a NXOpen.Routing.Electrical.AssignProxyBuilder |
NXOpen.Routing.Electrical.CablewaysBuilder | Represents NXOpen.Routing.Electrical.CablewaysBuilder |
NXOpen.Routing.Electrical.CablewaysLayoutBuilder | Represents NXOpen.Routing.Electrical.CablewaysLayoutBuilder |
NXOpen.Routing.Electrical.PathArrangementBuilder | Builder class to manage Path Arrangements |
NXOpen.Routing.FillerStockBuilder | Creates Filler stock on selected Segments |
NXOpen.Routing.FindByAttributesBuilder | Find runs/objects with specified attribute name and attribute value criteria, highlight the corresponding nodes in the run navigator and the graphics area |
NXOpen.Routing.FittingOverstockBuilder | Builder for creating or editing NXOpen.Routing.FittingOverstock objects |
NXOpen.Routing.GapDisplayBuilder | Builder for creating a gap arc object on a line segment |
NXOpen.Routing.HandrailBuilder | Represents a NXOpen.Routing.HandrailBuilder Creates a handrail from a selected point |
NXOpen.Routing.InfoObjectsBuilder | Represents a NXOpen.Routing.InfoObjectsBuilder |
NXOpen.Routing.InstanceNameLookupBuilder | Represents a NXOpen.Routing.InstanceNameLookupBuilder |
NXOpen.Routing.IntegrateRunsBuilder | Builder Class for Integrate Runs Object |
NXOpen.Routing.LinearPathBuilder | Builder for creating routing linear paths |
NXOpen.Routing.LinearPathSettings | Helper object used the by Routing.LinearPathBuilder builder |
NXOpen.Routing.ManualRouteBuilder | |
NXOpen.Routing.MergeStocksBuilder | Represents a NXOpen.Routing.MergeStocksBuilder Builder for merging routing stocks ( including space reservation stocks ) |
NXOpen.Routing.ModelTerminalsBuilder | The Builder to Model/UnModel the Terminals |
NXOpen.Routing.OverstockBuilder | Builder for creating/editing overstocks |
NXOpen.Routing.OverstockFacesBuilder | Builder for qualifying faces for overstock application over fittings |
NXOpen.Routing.PathStockBuilder | Assigns stocks to segments based of users critiera and the current default stock |
NXOpen.Routing.PlaceElbowsBuilder | Class PlaceElbowsBuilder |
NXOpen.Routing.PlacementSolutionsBuilder | |
NXOpen.Routing.PlacePartBuilder | |
NXOpen.Routing.PlatformCreatorBuilder | Builder for creating platform |
NXOpen.Routing.QuickPathBuilder | Builder for creating a path between user selected points |
NXOpen.Routing.RemoveDiscontinuityBuilder | Builder class for remove discontinuity object |
NXOpen.Routing.RouteSweptFoldBuilder | Represents a Rout Swept Fold Builder |
NXOpen.Routing.RouteSweptTwistBuilder | |
NXOpen.Routing.RunItemsBuilder | The builder for creating the list item of RunItems |
NXOpen.Routing.SegmentPairBuilder | The builder for creating the list item of SegmentPairs |
NXOpen.Routing.SimplifyPathBuilder | Represents a NXOpen.Routing.SimplifyPathBuilder for Simplify Path operation |
NXOpen.Routing.SpaceReservationBuilder | Represents a NXOpen.Routing.SpaceReservationBuilder |
NXOpen.Routing.SplinePathBuilder | Represents a NXOpen.Routing.SplinePathBuilder object |
NXOpen.Routing.SplitDuctBuilder | Represents a NXOpen.Routing.SplitDuctBuilder |
NXOpen.Routing.SplitRunBuilder | Builder Class for Split Run Object |
NXOpen.Routing.StockBrowserBuilder | Builder class for stock browser |
NXOpen.Routing.StockBuilder | Builder for creating/editing stocks |
NXOpen.Routing.StockColorBuilder | Represents a NXOpen.Routing.StockColorBuilder |
NXOpen.Routing.StockDataRefreshBuilder | Represents a NXOpen.Routing.StockDataRefreshBuilder Builder for updating/reloading routing stock data definitions |
NXOpen.Routing.StockOffsetPointBuilder | Applies Assemblies Constraints to a selected NXOpen.Point or NXOpen.Routing.ControlPoint to mimic the update/move behavior of the input smart NXOpen.Point |
NXOpen.Routing.StockPartConverterBuilder | Represents a NXOpen.Routing.StockPartConverterBuilder Builder for Part Conversion of the stocks |
NXOpen.Routing.StockStyleBuilder | Builder class to assigns style to the selected stock |
NXOpen.Routing.StockTransitionBuilder | Builder for creating/editing stockTransition |
NXOpen.Routing.SubdivideSegmentBuilder | Represents a NXOpen.Routing.SubdivideSegmentBuilder |
NXOpen.Routing.TangencyGroupBuilder | Represents a NXOpen.Routing.TangencyGroupBuilder Assign tangency for segments connected with current editing spline |
NXOpen.Routing.TerminalPortBuilder | Builder for creating the Terminal List Item for the ModelTerminals |
NXOpen.Routing.TransformPathBuilder | Builder for the "Transform Path" operation |
NXOpen.Routing.UnifyPathBuilder | Builder to unify Routing.Stock and Assemblies.Component based on specified characteristic values |
NXOpen.Routing.WatertightFittingsBuilder | Represents a NXOpen.Routing.WatertightFittingsBuilder |
NXOpen.Routing.WindCatcherBuilder | Builder class for Wind Catcher feature |
NXOpen.ShapeSearch.ShapeSearchBuilder | This class provides the methods to execute shape search and get the searched results |
NXOpen.ShipDesign.ShipNavigatorNodeBuilder | Represents the ship navigator node builder to add or edit ship navigator node |
NXOpen.SIM.ArchiveImportBuilder | Represents a ArchiveImportBuilder builder object |
NXOpen.SIM.ExportMachineKitBuilder | This class is used for the Export Machine Kit Dialog |
NXOpen.SIM.ImportMachineKitBuilder | This class is used for the Import Machine Kit Dialog |
NXOpen.SIM.IsvControlPanelBuilder | Represents a NXOpen.SIM.IsvControlPanelBuilder |
NXOpen.SIM.KinematicAxisBuilder | Represents the SimKimAxisBuilder class object |
NXOpen.SIM.KinematicChain | This class is used for add kinematic chain to the list |
NXOpen.SIM.KinematicChainConfiguration | This class is used for define kinematic chains |
NXOpen.SIM.KinematicChannelConfigurationBuilder | This class is used for channel configuration |
NXOpen.SIM.KinematicComponentBuilder | Represents the KinematicComponentBuilder class object |
NXOpen.SIM.KinematicImportMcfBuilder | Represents a builder for an import axis and channel data from mcf |
NXOpen.SIM.KinematicJunctionBuilder | Represents the SimKimJunctionBuilder class object |
NXOpen.SIM.KinematicSinumerikCaBuilder | This class is used for edit sinumerik collision avoidance properties |
NXOpen.SIM.LoadSnapshotBuilder | Represents a NXOpen.SIM.LoadSnapshotBuilder |
NXOpen.SIM.MachineKitBuilder | This class is used for the Machine Kit Create Dialog |
NXOpen.SIM.MachineLibraryBuilder | This class is used for the Machine Library Dialog |
NXOpen.SIM.MachineToolConfiguration | Represents a Machine Tool Configuration object |
NXOpen.SIM.NcProgramManagerBuilder | Represents a NcProgramManagerBuilder builder object |
NXOpen.SIM.PostConfigurator.CreationPostBuilder | This class is used to create a new postprocessor |
NXOpen.SIM.PostConfigurator.PostConfiguratorBuilder | This class is used to create a post configurator builder |
NXOpen.SIM.SaveSnapshotBuilder | Represents a NXOpen.SIM.SaveSnapshotBuilder |
NXOpen.SIM.SimDebugBuilder | Represents a NXOpen.SIM.SimDebugBuilder |
NXOpen.SIM.SinumerikCaExportBuilder | This class is used for export a spf file |
NXOpen.SIM.SinumerikCaFacetBuilder | This class is used for set the facet tolerance |
NXOpen.SIM.SinumerikCaPlaceholderBuilder | This class is used for select or unselect component of the placeholder tools |
NXOpen.SIM.SinumerikCaSimplifyBodiesBuilder | This class is used for replace geometry |
NXOpen.SketchAlongPathBuilder | Use the NXOpen.SketchAlongPathBuilder to create or reattach a NXOpen.Sketch along a path |
NXOpen.SketchAssociativeTrimBuilder | Represents a NXOpen.SketchAssociativeTrimBuilder |
NXOpen.SketchAutoConstrainBuilder | Represents a NXOpen.SketchAutoConstrainBuilder |
NXOpen.SketchAutoDimensionBuilder | Represents a NXOpen.SketchAutoDimensionBuilder |
NXOpen.SketchChamferBuilder | Represents a Chamfer builder |
NXOpen.SketchConicBuilder | Represents a NXOpen.SketchConicBuilder builder |
NXOpen.SketchConstraintBuilder | Represents a NXOpen.SketchConstraint builder |
NXOpen.SketchCornerBuilder | Create a corner between two sketch curves |
NXOpen.SketchDimensionBuilder | Edit the geometry references of an existing sketch dimension |
NXOpen.SketchEditDefiningSectionBuilder | Represents a NXOpen.SketchEditDefiningSectionBuilder builder |
NXOpen.SketchEllipseBuilder | Represents a NXOpen.SketchEllipseBuilder builder |
NXOpen.SketchInDraftingBuilder | Use the NXOpen.SketchInDraftingBuilder to create a NXOpen.Sketch on a NXOpen.Drawings.DraftingView or NXOpen.Drawings.DrawingSheet |
NXOpen.SketchInPlaceBuilder | Use the NXOpen.SketchInPlaceBuilder to create or reattach a NXOpen.Sketch on a NXOpen.DatumPlane or planar NXOpen.Face |
NXOpen.SketchMakeSymmetricBuilder | This class is used to add symmetric contraint to objects from a NXOpen.SketchMakeSymmetricBuilder |
NXOpen.SketchMirrorPatternBuilder | Represents a NXOpen.SketchMirrorPatternBuilder |
NXOpen.SketchOffsetBuilder | Represents a NXOpen.SketchOffsetBuilder |
NXOpen.SketchPasteBuilder | Represents a NXOpen.SketchPasteBuilder |
NXOpen.SketchPatternBuilder | Represents a NXOpen.SketchPatternBuilder |
NXOpen.SketchPolygonBuilder | Represents a NXOpen.SketchPolygon builder |
NXOpen.SketchQuickExtendBuilder | Represents a NXOpen.SketchQuickExtendBuilder |
NXOpen.SketchQuickTrimBuilder | Represents a NXOpen.SketchQuickTrimBuilder |
NXOpen.STLCreator | Represents a NXOpen.STLCreator to be used when exporting the STL Data This class is created using NXOpen.DexManager |
NXOpen.SuppressByExpressionBuilder | Represents a NXOpen.SuppressByExpressionBuilder |
NXOpen.SurfaceUVDirectionBuilder | Represents an edit surface u/v direction builder that allows reversing or swapping parametric directions |
NXOpen.ToolDesigner.AssignWeldsBuilder | AssignWeldsBuilder |
NXOpen.ToolDesigner.AssociateDatumsUnitDesignsBuilder | AssociateDatumsUnitDesignsBuilder |
NXOpen.ToolDesigner.CloneUnitDesignBuilder | A class that used for clone unit design |
NXOpen.ToolDesigner.GlobalSelectionBuilder | GlobalSelectionBuilder |
NXOpen.ToolDesigner.MultiSectionBuilder | A class that used for creating multi section |
NXOpen.ToolDesigner.ReusePieChartBuilder | ReusePieChartBuilder |
NXOpen.ToolDesigner.SearchDatumsBuilder | SearchDatumsBuilder |
NXOpen.ToolDesigner.SearchDesignesBuilder | SearchDesignesBuilder |
NXOpen.ToolDesigner.SelectableTableEditorTesterBuilder | A class that used for align the model to the product |
NXOpen.ToolDesigner.SelectDatumsBuilder | SelectDatumsBuilder |
NXOpen.ToolDesigner.SelectFixtureRootBuilder | A class that used for align the model to the product |
NXOpen.ToolDesigner.SelectFixtureUnitsBuilder | SelectFixtureUnitsBuilder |
NXOpen.ToolDesigner.SelectGunTipsBuilder | A class that used for align the model to the product |
NXOpen.ToolDesigner.SelectWeldsBuilder | SelectWeldsBuilder |
NXOpen.ToolDesigner.SetGunApproachBuilder | SetGunApproachBuilder |
NXOpen.ToolDesigner.VolumeFilterBuilder | VolumeFilterBuilder |
NXOpen.Tooling.AddReusableFeatureBuilder | Represents a NXOpen.Tooling.AddReusableFeatureBuilder |
NXOpen.Tooling.AddReusablePart | Represents a NXOpen.Tooling.AddReusablePart |
NXOpen.Tooling.AssemblyDrawingBuilder | Represents a NXOpen.Tooling.AssemblyDrawingBuilder which is used to create or edit the Assembly Drawing |
NXOpen.Tooling.AssignPatchBuilder | Represents a builder to be used to add sheet bodies as patch surfaces or delete patch surfaces |
NXOpen.Tooling.AutoDimensionBuilder | Represents a NXOpen.Tooling.AutoDimensionBuilder which is used to create or edit the Auto Dimension |
NXOpen.Tooling.BackingPadBuilder | Represents a NXOpen.Tooling.BackingPadBuilder which is used to create or delete the Backing Pad |
NXOpen.Tooling.BendInsertDesignBuilder | Represents a NXOpen.Tooling.BendInsertDesignBuilder Bend Insert Design is to create inset puch or die for bend |
NXOpen.Tooling.BendOperationBuilder | Represents a NXOpen.Tooling.BendOperationBuilder builder |
NXOpen.Tooling.BlankGeneratorBuilder | Represents a NXOpen.Tooling.BlankGeneratorBuilder This class is for Blank Generator Design UI |
NXOpen.Tooling.BlankLayoutBuilder | Progressive Die Wizard blank layout builder |
NXOpen.Tooling.BlankNestingBuilder | Blank Nesting Builder of PDW, EDW and Die Engineering |
NXOpen.Tooling.BlendCurve3DBuilder | Represents a NXOpen.Tooling.BlendCurve3DBuilder builder which implements blend curves in one side where the corner radius is too small |
NXOpen.Tooling.BomBuilder | Represents a Tooling::BomBuilder builder |
NXOpen.Tooling.BomListBuilder | Represents a NXOpen.Tooling.BomListBuilder builder |
NXOpen.Tooling.BurringInsertBuilder | Progressive Die Wizard builder to design burring punch and die insert |
NXOpen.Tooling.CalculateAreaBuilder | The CalculateArea builder |
NXOpen.Tooling.ChangeoverManagementBuilder | Represents a NXOpen.Tooling.ChangeoverManagementBuilder to support changeover workflow management |
NXOpen.Tooling.ChannelAdjustBuilder | The builder class for Channel Adjust which assists you to adjust the postion and the length of the channel |
NXOpen.Tooling.ChannelFittingBuilder | The builder class for Channel Fitting which assists you to add cooling fitting |
NXOpen.Tooling.ClearanceManagementBuilder | Progressive Die Wizard builder to management clearances |
NXOpen.Tooling.ColorExpressionsBuilder | Represents a NXOpen.Tooling.ColorExpressionsBuilder builder |
NXOpen.Tooling.CompDrawingBuilder | Represents a NXOpen.Tooling.CompDrawingBuilder which is used to create or edit the Component Drawing |
NXOpen.Tooling.ConceptPositionBuilder | concept position builder for standard part design |
NXOpen.Tooling.ConcurrentDesignManagementBuilder | Represents a NXOpen.Tooling.ConcurrentDesignManagementBuilder to support concurrent design workflow management |
NXOpen.Tooling.CoolingConnectBuilder | The builder class for Cooling connection which assists you to create channel and connect it to other channels |
NXOpen.Tooling.CoolingDefineChannelBuilder | The builder class for Cooling Define Channel which assists you to create channels directly |
NXOpen.Tooling.CoolingExtendBuilder | The builder class for Channel Extend which assists you to extend the channel |
NXOpen.Tooling.CoolingPatternBuilder | The builder class for Cooling pattern which assists you to create channels with selected curves |
NXOpen.Tooling.CopySolidBuilder | Represents a NXOpen.Tooling.CopySolidBuilder builder |
NXOpen.Tooling.CornerDesignBuilder | Represents a NXOpen.Tooling.CornerDesignBuilder , Corner Design is to provide tools to make corner |
NXOpen.Tooling.CreateBoxBuilder | Represents a box creation operation |
NXOpen.Tooling.DefineCamBuilder | Represents a NXOpen.Tooling.DefineCamBuilder to create different types of cam objects, which are used for kinematic motion |
NXOpen.Tooling.DefineLifterBuilder | Represents a NXOpen.Tooling.DefineLifterBuilder to create different types of lifter objects, which are used for kinematic motion |
NXOpen.Tooling.DesignTrimToolBuilder | Represents a builder to be used to create Mold Wizard design trim tool |
NXOpen.Tooling.DieBaseBuilder | Represents Progressive Die Wizard and Engineering Die Wizard builder to manage die base |
NXOpen.Tooling.DieCavityAndSlugHoleBuilder | Represents die cavity and slug hole builder |
NXOpen.Tooling.DieDesDrawDieBuilder | Represents the Die Design draw die management builder, which is to create a draw die by selected sheet body, curve and base plane |
NXOpen.Tooling.DieDesDrawPunchBuilder | Die Design draw punch management builder, create a draw die punch by selected sheet body, curve and base plane |
NXOpen.Tooling.DieDesignLowerBinderBuilder | Represents a Lower Binder builder |
NXOpen.Tooling.DieDesignSettingBuilder | Represents a NXOpen.Tooling.DieDesignSettingBuilder This class is for Die Design Setting UI |
NXOpen.Tooling.DieDesignTrimPostBuilder | Represents a Trim Post builder |
NXOpen.Tooling.DieDesPierceInsertBuilder | Represents Die Design Pierce Insert builder |
NXOpen.Tooling.DieEngDefineProductOrientationBuilder | Die Engineer define product orientation builder |
NXOpen.Tooling.DieEngProcessUpdateManagerBuilder | Die Engineer process update manager management builder |
NXOpen.Tooling.DieEngTrimAngleCheckBuilder | Represents a Trim Angle Check builder |
NXOpen.Tooling.DieInsertBuilder | Represents die insert builder |
NXOpen.Tooling.DirectUnbendBuilder | The builder contains all inputs for direct unbend |
NXOpen.Tooling.DirectUnfoldBuilder | The builder contains all inputs for direct unfolding |
NXOpen.Tooling.DrawingSheetNameBuilder | Represents a NXOpen.Tooling.DrawingSheetNameBuilder |
NXOpen.Tooling.EdgePatchBuilder | Represents a builder to be used to create edge patch surfaces |
NXOpen.Tooling.EjectorPostProcessingBuilder | Represents a builder to be used to create Mold Wizard ejector post processing |
NXOpen.Tooling.EjectorTableBuilder | Represens a ejector table builder |
NXOpen.Tooling.ElectrodeBlankBuilder | Design electrode blank builder to create an electrode blank for the selected body |
NXOpen.Tooling.ElectrodeCheckingBuilder | Electrode Checking builder to check the touch status of all electrode |
NXOpen.Tooling.ElectrodeComponentBuilder | Electrode component builder to install holder and pallet |
NXOpen.Tooling.ElectrodeCopyBuilder | The ElectrodeCopy builder |
NXOpen.Tooling.ElectrodeDeleteBuilder | Electrode delete component builder to remove blank, pallet and holder from assembly |
NXOpen.Tooling.ElectrodeDesign | Represents an Electrode Design |
NXOpen.Tooling.ElectrodeInitializationBuilder | Electrode initialize project builder to creates an electrode design assembly |
NXOpen.Tooling.EnlargeSurfaceBuilder | Mold Wizard enlarge surface management builder, trims a enlarged surface to a boundary of edges, curves, datum planes or faces |
NXOpen.Tooling.EWDraftingBuilder | Represents the drafting builder which is used to create electrode drafting |
NXOpen.Tooling.EWMultiPositionBuilder | Represents the multiple position builder which is used to get transformed electrode heads together |
NXOpen.Tooling.FaceAttributeBuilder | Represents a builder to be used to create face attribute |
NXOpen.Tooling.FaceColorManagementBuilder | Tooling builder to assign and edit color of objects |
NXOpen.Tooling.FaceSplitBuilder | Represents a face split operation |
NXOpen.Tooling.FamilyMoldBuilder | Creates a Mold Wizard Family Mold builder |
NXOpen.Tooling.FastenerAssemConfigBuilder | Represents a Fastener Assem Config Collection |
NXOpen.Tooling.FastenerAssy | Represents a NXOpen.Tooling.FastenerAssy |
NXOpen.Tooling.FastenerAssyCustomizationBuilder | Fastener assembly customization builder |
NXOpen.Tooling.FastenerRemoveNodeBuilder | Fastener remove node builder |
NXOpen.Tooling.FeatureReferenceSetBuilder | Represents a NXOpen.Tooling.FeatureReferenceSetBuilder builder |
NXOpen.Tooling.FlowAnalysisBuilder | Represents the builder which is used to create flow analysis |
NXOpen.Tooling.FlowDisplayBuilder | Represents the builder which is used to create flow analysis |
NXOpen.Tooling.ForceCalculationBuilder | Represents a NXOpen.Tooling.ForceCalculationBuilder Force Calculation Design is to calculate force of process |
NXOpen.Tooling.FormingInsertBuilder | Progressive Die Wizard builder to design forming punch and die insert |
NXOpen.Tooling.GeneralInsertBuilder | General Insert Design Builder of PDW and EDW |
NXOpen.Tooling.GuidedExtensionBuilder | Builder for creating Guided Extension surface in NX |
NXOpen.Tooling.HemFixerBuilder | Hem Fixer Builder of PDW and EDW |
NXOpen.Tooling.HoleDatumSymbolBuilder | Creates hole datum symbol builder for progressive die |
NXOpen.Tooling.HoleManufacturingNoteBuilder | Tooling builder for HoleManufacturingNote |
NXOpen.Tooling.HoleReportBuilder | Represents a NXOpen.Tooling.HoleReportBuilder This class is for Hole Report Design UI |
NXOpen.Tooling.InitProjBuilder | Represents a NXOpen.Tooling.InitProjBuilder |
NXOpen.Tooling.InitProjectBuilder | Mold Wizard initialize project builder |
NXOpen.Tooling.InsertAuxiliaryBuilder | PDW insert auxiliary builder to design various auxiliaries of insert group |
NXOpen.Tooling.InsertEditToolsBuilder | Represents a NXOpen.Tooling.InsertEditToolsBuilder which is used to copy or delete the insert edit |
NXOpen.Tooling.IntermediateStageBuilder | Represents a NXOpen.Tooling.IntermediateStageBuilder builder |
NXOpen.Tooling.LayoutBuilder | Represents a Tooling::LayoutBuilder builder |
NXOpen.Tooling.LayoutManagementBuilder | Layout Management Builder of Engineering Die Wizard |
NXOpen.Tooling.LayoutRepositionBuilder | Represents a Tooling::LayoutRepositionBuilder builder |
NXOpen.Tooling.LsdynaFormAnalysisResultDisplayBuilder | Represents a Ly-Dyna Formability Analysis - Result Display builder |
NXOpen.Tooling.LsdynaGeometryPreparationBuilder | Stamping Die LS-Dyna integration draw geometry preprare builder |
NXOpen.Tooling.LsdynaKfileGeneratorBuilder | Represents LS-Dyna K file builder - K file generator builder |
NXOpen.Tooling.ManufacturingGeometryBuilder | Represents a builder to be used to create manufacturing geometry |
NXOpen.Tooling.MoldCsysBuilder | Mold Wizard MoldCsys project builder |
NXOpen.Tooling.MoldDesign | Represents an Mold Design |
NXOpen.Tooling.MoldFeatureRecognitionBuilder | Represents a NXOpen.Tooling.MoldFeatureRecognitionBuilder builder |
NXOpen.Tooling.MoldFillingBuilder | Builder used to add a gate/runner standard part from fill library, it returns a null reference (Nothing in Visual Basic) |
NXOpen.Tooling.MoldInsertBuilder | Mold Wizard mold insert management builder |
NXOpen.Tooling.MoldProcessBuilder | Represents a Tooling::MoldProcessBuilder builder |
NXOpen.Tooling.MotionSimulationBuilder | Represents a NXOpen.Tooling.MotionSimulationBuilder to support dynamic interference check |
NXOpen.Tooling.MWCopySheetsBuilder | Builder for copying sheets in the Mold Wizard application |
NXOpen.Tooling.MWDefineRegionsBuilder | The MWDefineRegions builder |
NXOpen.Tooling.MWDefineSheetsBuilder | Builder for defining sheets in Mold Wizard |
NXOpen.Tooling.MWDesignGuideLinesBuilder | The builder for designing guide lines in Mold Wizard |
NXOpen.Tooling.MWDesignPartingSurfaceBuilder | The builder for designing parting surface in Mold Wizard |
NXOpen.Tooling.MWMoldedPartValidationBuilder | Represents a builder to be used to perform Molded Part Validation analysis |
NXOpen.Tooling.MWPartingManagerBuilder | Builder for the Parting Manager in the Mold Wizard application |
NXOpen.Tooling.MWSearchRegionBuilder | The Search Region builder is for defining a region by searching the region faces given a set of seed faces and boundary edges |
NXOpen.Tooling.MWTraversePartingLinesBuilder | Builder for creating parting lines by traversing in the Mold Wizard application |
NXOpen.Tooling.ObjectAttributeManagementBuilder | Tooling builder to assign and edit attributes of objects |
NXOpen.Tooling.OffsetCurve3DBuilder | Represents a NXOpen.Tooling.OffsetCurve3DBuilder builder which implements offset curves along a direction with offset distance in three dimension |
NXOpen.Tooling.PiercingInsertBuilder | Represents piercing insert builder |
NXOpen.Tooling.PiercingInsertMiniToolsBuilder | Represents piercing insert mini tools builder |
NXOpen.Tooling.PocketBuilder | Mold Wizard pocket management builder |
NXOpen.Tooling.ProfileSplitBuilder | The ProfileSplit builder |
NXOpen.Tooling.PunchInsertBuilder | Represents punch insert builder |
NXOpen.Tooling.QuickDatumCsysBuilder | Represents a NXOpen.Tooling.QuickDatumCsysBuilder builder |
NXOpen.Tooling.QuickQuotationBuilder | Progressive Die Wizard builder to create quick quotation |
NXOpen.Tooling.ReferenceBlendBuilder | The ReferenceBlend builder |
NXOpen.Tooling.ReliefDesignBuilder | Represents a NXOpen.Tooling.ReliefDesignBuilder Relief Design is to cut relief pocket for forming region |
NXOpen.Tooling.RemoveHolesBuilder | Remove Hole is used to patch holes for a solid body |
NXOpen.Tooling.RenameAndExportComponentBuilder | Creates rename and export component builder for progressive die |
NXOpen.Tooling.ReplaceSolidBuilder | Represents a replace solid operation |
NXOpen.Tooling.ReusableObjectPasteBuilder | Represents a NXOpen.Tooling.ReusableObjectPasteBuilder |
NXOpen.Tooling.ReusablePocketBuilder | Reusable pocket builder |
NXOpen.Tooling.ReusePositioningObjectBuilder | Represents a NXOpen.Tooling.ReusePositioningObjectBuilder |
NXOpen.Tooling.RunnerBuilder | Mold Wizard runner management builder, select curves as runner guide, choose section type and edit section parameters, optional choose boolean type to create runner channel |
NXOpen.Tooling.RunSimulationBuilder | Represents a NXOpen.Tooling.RunSimulationBuilder to animate the model, analyze the collision and reference |
NXOpen.Tooling.ScrapDesignBuilder | Represents a scrap design builder |
NXOpen.Tooling.SectionLineCreationBuilder | Represents a NXOpen.Tooling.SectionLineCreationBuilder which is used to create or edit the section line creation |
NXOpen.Tooling.SetPressModelBuilder | Represents a Tooling.SetPressModelBuilder to set and load the press model |
NXOpen.Tooling.SheetMetalFeatureRecognitionBuilder | Represents a NXOpen.Tooling.SheetMetalFeatureRecognitionBuilder builder |
NXOpen.Tooling.ShimBuilder | Shim Builder of PDW and EDW |
NXOpen.Tooling.ShimInnerProfileSetBuilder | This is a seed block of set list |
NXOpen.Tooling.SIZERExportBuilder | Exports input parameters for motor selection to SIZER drive design to support the sizing, configuration, and selection of drive components |
NXOpen.Tooling.SIZERImportBuilder | Imports results for motor selection from SIZER drive design based on the sizing, configuration, and selection of drive components |
NXOpen.Tooling.SlugRetentionBuilder | Represents a NXOpen.Tooling.SlugRetentionBuilder which is used to create the Slug Retention |
NXOpen.Tooling.SmartScrewUpdateBuilder | Smart Screw Update of MW, PDW and EDW |
NXOpen.Tooling.SolidPatchBuilder | Represents a builder to be used to create a solid patch |
NXOpen.Tooling.SpecialFormingBuilder | Creates special forming insert builder for progressive die |
NXOpen.Tooling.SpecialPiercingInsertBuilder | Creates special piercing insert for progressive die |
NXOpen.Tooling.SpecifyBaffleBuilder | Represents a builder to be used to create specify baffle |
NXOpen.Tooling.SpecifyCircuitBuilder | Represents a builder to be used to create specify circuit |
NXOpen.Tooling.SpindleSliderBuilder | Represents a Tooling.SpindleSliderBuilder to create a spindle slider |
NXOpen.Tooling.SplitInsertBuilder | Creates split insert builder for progressive die |
NXOpen.Tooling.SplitSolidBuilder | Represents a builder to be used to split a solid with geometry tools |
NXOpen.Tooling.StandardPartBuilder | Represents a builder to be used to create Mold Wizard Standard Part |
NXOpen.Tooling.StandardPartPositionBuilder | Represents a StandardPartPositionBuilder to add or edit a standard part in the selected plane with specified position |
NXOpen.Tooling.StockSizeBuilder | Represents a Tooling::StockSizeBuilder builder |
NXOpen.Tooling.StripLayoutBuilder | Represents a NXOpen.Tooling.StripLayoutBuilder This class is for Strip Layout Design UI |
NXOpen.Tooling.StripLayoutStationInformationBuilder | Strip Layout Process Description Builder of Tooling |
NXOpen.Tooling.StripperVentingBuilder | Stripper Venting Builder of PDW and EDW |
NXOpen.Tooling.SubInsertBuilder | The SubInsert builder |
NXOpen.Tooling.TraverseLoopBuilder | The builder class for Traverse Loop component which assists you to select or traverse a string of adjacent curves or edges |
NXOpen.Tooling.TrimMoldComponentsBuilder | Represents a builder to be used to create Mold Wizard trim mold components |
NXOpen.Tooling.TrimRegionBuilder | Mold Wizard trim region management builder, trims a body to a boundary of edges, curves or bodies |
NXOpen.Tooling.TrimSolidBuilder | Mold Wizard trim solid management builder, trims bounding box body with region, subtract bounding box with workpiece or keep region and box |
NXOpen.Tooling.UndersizeBuilder | Represents a NXOpen.Tooling.UndersizeBuilder |
NXOpen.Tooling.UnfoldingSimulationBuilder | Unfolding Simulation Builder of PDW and EDW |
NXOpen.Tooling.UnusedFileManagementBuilder | Represents a NXOpen.Tooling.UnusedFileManagementBuilder Unused File Management is to manage the unused files of the project |
NXOpen.Tooling.UserDefinedMotionBuilder | Represents a NXOpen.Tooling.UserDefinedMotionBuilder to create user defined motion, which contains linear and rotary motion |
NXOpen.Tooling.ValidCheckBuilder | This is the JA builder for static interference check |
NXOpen.Tooling.WallThicknessCheckerBuilder | Represents a builder to be used to perform wall thickness analysis |
NXOpen.Tooling.WireHoleBuilder | Represents a NXOpen.Tooling.WireHoleBuilder This class is for Wire Hole Design UI |
NXOpen.Tooling.WorkpieceBuilder | Mold Wizard work piece builder |
NXOpen.UserDefinedTemplate.InstantiationBuilder | Represents a NXOpen.UserDefinedTemplate.InstantiationBuilder |
NXOpen.Validate.OverrideBuilder | Represents a NXOpen.Validate.Override builder |
NXOpen.Validate.RequirementBuilder | Represents a NXOpen.Validate.Requirement builder |
NXOpen.VirtuallabImporter | Represents a VirtuallabImporter to be used when importing the Virtuallab Data This class is created using DexManager |
NXOpen.VisualReporting.SpecifyDateBuilder | Represents a Specify Date Builder |
NXOpen.VisualReporting.VisualReportBuilder | A Builder for creating and editing NXOpen.VisualReporting.VisualReport s |
NXOpen.Weld.AutoPointBuilder | Represents a NXOpen.Weld.AutoPointBuilder builder |
NXOpen.Weld.AutoWeldSymbolsBuilder | Represents a NXOpen.Weld.AutoWeldSymbolsBuilder builder |
NXOpen.Weld.CharacteristicsBuilder | This builder allows you to define the attribute values to be set on the output of the weld feature |
NXOpen.Weld.ConnectedFaceFinderBuilder | Represents a builder to run the Connected Face Finder operation |
NXOpen.Weld.DatumCommonBuilder | Used to create or edit a NXOpen.Weld.DatumSurface or NXOpen.Weld.DatumPin feature |
NXOpen.Weld.DatumPinBuilder | Used to create or edit a NXOpen.Weld.DatumPin feature |
NXOpen.Weld.DatumSurfaceBuilder | Used to create or edit a NXOpen.Weld.DatumSurface feature |
NXOpen.Weld.EasyPatternBuilder | Represents the easy pattern builder |
NXOpen.Weld.EdgePrepBuilder | A builder used to create or edit a NXOpen.Weld.EdgePrep feature |
NXOpen.Weld.EdgePrepValuesBuilder | Used to view or edit the values used to define the welding joint and edge preparation |
NXOpen.Weld.ExportWeldBuilder | Represents a ExportWeldBuilder class |
NXOpen.Weld.ExportWeldJointBuilder | Represents exporting weld joints |
NXOpen.Weld.InformationBuilder | This class is used by "Fabrication Information" to output fabrication objects information |
NXOpen.Weld.LocatorReferenceBuilder | This class is used by "Locator Reference" to add the additional component for a weld datum DF |
NXOpen.Weld.StructureWeldBuilder | This class is used to create or edit the information shared among all Structure Weld builders |
NXOpen.Weld.SurfaceWeldBuilder | Use to create or edit a NXOpen.Weld.SurfaceWeld feature |
NXOpen.Weld.WeldJointBuilder | Used to create or edit a NXOpen.Weld.WeldJoint feature |
NXOpen.Weld.JointExitBuilder | Used to set custom edge preparation parameters of a NXOpen.Weld.WeldJoint feaure |
NXOpen.Weld.UserDefinedWeldBuilder | Represents a NXOpen.Weld.UserDefinedWeldBuilder builder |
NXOpen.Weld.WeldAdvisorBuilder | Represents a weld advisor test |
NXOpen.Weld.WeldBeadBuilder | Used to create or edit a NXOpen.Weld.WeldBead feature |
NXOpen.Weld.WeldFillBuilder | A builder used to create or edit a NXOpen.Weld.Fill feature |
NXOpen.Weld.WeldFillStripBuilder | A builder used to create or edit a single strip of the NXOpen.Weld.WeldFillBuilder |
NXOpen.Weld.WeldImportBuilder | Creates Weld features by reading a csv file |
NXOpen.Weld.WeldLabelBuilder | Create weld labels for multiple welds and BIW locators, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable |
NXOpen.Weld.WeldPmiBuilder | Create PMI symbols for multiple structure welds, this builder's Commit can produce more than one object, the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable |
NXOpen.Weld.WeldPointBuilder | Represents a Spot Weld feature |
NXOpen.Weld.WeldPreferenceBuilder | Represents a NXOpen.Weld.WeldPreferenceBuilder builder |
NXOpen.CAE.ResponseSimulation.VelocityImpactDirection | Represents a NXOpen.CAE.ResponseSimulation.VelocityImpactDirection |
NXOpen.CAE.ResponseSimulation.VelocityImpactParameters | Represents a NXOpen.CAE.ResponseSimulation.VelocityImpactParameters |
NXOpen.CAE.SelectCAEBody | Represents a single object selection |
NXOpen.CAE.SelectCAEBodyList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectCAEEdge | Represents a single object selection |
NXOpen.CAE.SelectCAEEdgeList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectCAEFace | Represents a single object selection |
NXOpen.CAE.SelectCAEFaceList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectFEElemFaceList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectFENode | Represents a single object selection |
NXOpen.CAE.SelectFENodeList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectMeshList | Represents a list of objects on a selection list |
NXOpen.CAE.SimMotionLoadsListItemBuilder | Represents a NXOpen.CAE.SimMotionLoadsListItemBuilder |
NXOpen.CAM.BaseBuilder | Represents a NXOpen.CAM.BaseBuilder |
NXOpen.CAM.NcmSubopBuilder | Represents a NXOpen.CAM.NcmSubopBuilder |
NXOpen.CAM.NcmHoleMachining | Represents a NXOpen.CAM.NcmHoleMachining |
NXOpen.CAM.NcmHoleDrilling | Represents a NXOpen.CAM.NcmHoleDrilling |
NXOpen.CAM.NcmOptimizeGroup | Represents a CAM.NcmOptimizeGroup |
NXOpen.CAM.NcmPlanarBuilder | Represents a NXOpen.CAM.NcmPlanarBuilder |
NXOpen.CAM.NcmScBuilder | Represents a NXOpen.CAM.NcmScBuilder |
NXOpen.CAM.NcmTurningBuilder | Represents a CAM |
NXOpen.CAM.NcmTurnRoughFinishBuilder | Represents a CAM |
NXOpen.CAM.NcmTurnRoughBuilder | Represents a CAM |
NXOpen.CAM.NcmTurnThreadBuilder | Represents a CAM |
NXOpen.CAM.NcmWedmBuilder | Represents a CAM |
NXOpen.CAM.Boundary | Represents a CAM boundary object |
NXOpen.CAM.BoundaryPlanarMill | Represents a CAM boundary object |
NXOpen.CAM.CustomLoops | Represents a CustomLoops object |
NXOpen.CAM.CustomLoopSet | Represents a loop set object |
NXOpen.CAM.CutSideBuilder | Represents a cut side builder |
NXOpen.CAM.Geometry | Represents a CAM geometry object |
NXOpen.CAM.FBM.FeatureGeometry | Represents a feature geometry builder |
NXOpen.CAM.FBM.MachiningFeatureGeometry | Represents a feature geometry builder |
NXOpen.CAM.FBM.ThreadFeatureGeometry | Represents a feature geometry builder |
NXOpen.CAM.OptimizeFeatureGeometry | Represents an optimize feature geometry builder |
NXOpen.CAM.GeometryGroup | Represents a CAM geometry builder for group level |
NXOpen.CAM.GuidedCurveBuilder | Represents a Guided Curve Drive Method Builder |
NXOpen.CAM.GuidedCurveCutOrder | Represents a guided curve cut order builder |
NXOpen.CAM.GuidingCurvesCutDir | Represents a guiding curves cut dir type |
NXOpen.CAM.PatternTypeBuilder | Represents a Guided Curve pattern type builder |
NXOpen.CAM.SelectCAMFeature | Represents a single object selection |
NXOpen.CAM.SelectCAMFeatureList | Represents a list of objects on a selection list |
NXOpen.CAM.SpunOutlineGeom | Represents a spun outline geometry object for turning boundary |
NXOpen.CAM.SurfaceDriveGeometry | Represents a CAM drive geometry object for surface area |
NXOpen.DateBuilder | The DateBuilder class allows a date and/or time to be input or output via the DateItem builder |
NXOpen.DateItemBuilder | This class stores a date and time |
NXOpen.Diagramming.BaseSubObjectBuilder | Represents a BaseSubObjectBuilder |
NXOpen.Diagramming.FormattedStringBuilder | Represents a FormattedStringBuilder |
NXOpen.Diagramming.LocationBuilder | Represents a LocationBuilder |
NXOpen.Diagramming.ConnectionLocationBuilder | Represents a ConnectionLocationBuilder |
NXOpen.Diagramming.RenderingPropertiesBuilder | Represents a RenderingPropertiesBuilder |
NXOpen.Diagramming.BaseTaggedObjectBuilder | Represents a BaseTaggedObjectBuilder |
NXOpen.Diagramming.Tables.CellBuilder | Represents a CellBuilder |
NXOpen.Diagramming.Tables.CellRangeBuilder | Represents a CellRangeBuilder |
NXOpen.Diagramming.Tables.ColumnBuilder | Represents a ColumnBuilder |
NXOpen.Diagramming.Tables.RowBuilder | Represents a RowBuilder |
NXOpen.Diagramming.Tables.CellSettingsBuilder | Represents a CellSettingsBuilder |
NXOpen.Diagramming.Tables.ContinuationDataBuilder | Represents a ContinuationDataBuilder |
NXOpen.Diagramming.Tables.TableSettingsBuilder | Represents a TableSettingsBuilder |
NXOpen.Diagramming.SheetBorderSettingsBuilder | The SheetBorderSettings builder |
NXOpen.Diagramming.SheetMarginSettingsBuilder | The SheetMarginSettings builder |
NXOpen.Diagramming.SheetZoneSettingsBuilder | The SheetZoneSettings builder |
NXOpen.Diagramming.TextStyleBuilder | Represents a TextStyleBuilder |
NXOpen.Diagramming.TitleBlockCellBuilder | Represents a builder to edit NXOpen.Diagramming.TitleBlock 's cell |
NXOpen.DiagrammingLibraryAuthor.LineTypeBuilder | Represents a LineTypeBuilder |
NXOpen.DiagrammingLibraryAuthor.PipeStockBuilder | Represents a PipeStockBuilder |
NXOpen.DiagrammingLibraryAuthor.PortDataBuilder | Represents a PortDataBuilder |
NXOpen.DiagrammingLibraryAuthor.Symbol2DBuilder | Represents a Symbol2DBuilder |
NXOpen.DiagrammingLibraryAuthor.Symbol3DBuilder | Represents a Symbol3DBuilder |
NXOpen.Die.DieAttributesBuilder | Represents a NXOpen.Die.DieAttributesBuilder |
NXOpen.Die.DieBooleanBuilder | Represents a NXOpen.Die.DieBooleanBuilder |
NXOpen.Die.DieDirectionBuilder | Represents a NXOpen.Die.DieDirectionBuilder |
NXOpen.Die.DieLimitsBuilder | Limits a path to a segment of the path |
NXOpen.Die.DieLocationBuilder | Represents a NXOpen.Die.DieLocationBuilder |
NXOpen.Die.DieLocationsBuilder | Represents a NXOpen.Die.DieLocationsBuilder |
NXOpen.Die.DiePlaneBuilder | Represents a NXOpen.Die.DiePlaneBuilder |
NXOpen.Die.DrawBeadSegmentBuilder | Segment builder for Die Engineering draw bead |
NXOpen.Die.DrawBeadTaperBuilder | Taper definition for the end of the Die Engineering Draw Bead |
NXOpen.Display.LayerSettingsBuilder | Represents a builder for object layer settings |
NXOpen.Display.PointCloudClippingBoxesListItemBuilder | Represents a NXOpen.Display.PointCloudClippingBoxesListItemBuilder to create clipping regions for NXOpen.Display.PointCloud |
NXOpen.Display.SectionCurveSettingsBuilder | Represents a NXOpen.Display.SectionCurveSettingsBuilder |
NXOpen.Drafting.AttributeItemBuilder | Represents a NXOpen.Drafting.AttributeItemBuilder |
NXOpen.Drafting.AutomationRuleBuilder | Represents a NXOpen.Drafting.AutomationRuleBuilder |
NXOpen.Drafting.CutCopyPasteLeaderBuilder | Represents a Drafting Paste, especially when reassociating a leader on paste |
NXOpen.Drafting.PrimaryContentItemBuilder | Represents a NXOpen.Drafting.PrimaryContentItemBuilder |
NXOpen.Drawings.AnnotationSettingsBuilder | Represents a Drawings.AnnotationSettingsBuilder |
NXOpen.Drawings.AssociativeAngleBuilder | This builder allows the user to create an associative or non-associative angle by measuring between a combination of two objects or vectors evaluated on a specified plane, or by an expression |
NXOpen.Drawings.AutomationBookletBuilder | Represents a NXOpen.Drawings.AutomationBookletBuilder |
NXOpen.Drawings.AutomationTemplateRegionBuilder | Represents a NXOpen.Drawings.AutomationTemplateRegionBuilder |
NXOpen.Drawings.BorderAndZoneStyleBuilder | Represents the Border and Zone Style Builder which manages all the style attributes related * to sheet borders, sheet margins and sheet zones |
NXOpen.Drawings.ConversionProcessSettingsBuilder | Represents a Drawings.ConversionProcessSettingsBuilder |
NXOpen.Drawings.DraftingComponentSelectionBuilder | This builder allows the user to select a view in which component objects can be designated as primary or secondary geometry |
NXOpen.Drawings.DrawingFormatSheetBuilder | Represents a NXOpen.Drawings.DrawingFormatSheetBuilder |
NXOpen.Drawings.DrawingRegionRulesBuilder | Represents a Drawing region rules builder |
NXOpen.Drawings.GeneralWorkFlowBuilder | Represents a NXOpen.Drawings.GeneralWorkFlowBuilder |
NXOpen.Drawings.HalfSectionLineBuilder | Represents a NXOpen.Drawings.HalfSectionLineBuilder |
NXOpen.Drawings.HiddenObjectsBuilder | This builder allows the user to select a view in which component objects can be designated as hidden or shown |
NXOpen.Drawings.HingeLineBuilder | Represents a Drawings |
NXOpen.Drawings.MultipleViewPlacementBuilder | This builder allows the user to create a Multiple View Placement |
NXOpen.Drawings.OrientedSectionLineBuilder | Represents a NXOpen.Drawings.OrientedSectionLineBuilder |
NXOpen.Drawings.OvtBuilder | Represents a NXOpen.Drawings.OvtBuilder |
NXOpen.Drawings.ParentViewBuilder | Represents a NXOpen.Drawings.ParentViewBuilder |
NXOpen.Drawings.PointAndAngleSectionLineBuilder | Represents a NXOpen.Drawings.PointAndAngleSectionLineBuilder |
NXOpen.Drawings.PointToPointSectionLineBuilder | Represents a NXOpen.Drawings.PointToPointSectionLineBuilder |
NXOpen.Drawings.ProjectedViewOrientationBuilder | Represents a NXOpen.Drawings.ProjectedViewOrientationBuilder |
NXOpen.Drawings.RevolvedSectionLineBuilder | Represents a NXOpen.Drawings.RevolvedSectionLineBuilder |
NXOpen.Drawings.SectionLineSegmentBuilder | Represents a NXOpen.Drawings.SectionLineSegmentBuilder |
NXOpen.Drawings.SectionLineSettingsBuilder | Represents the Section Line Settings Builder (Drawings |
NXOpen.Drawings.SelectDraftingView | Represents a single object selection |
NXOpen.Drawings.SelectDraftingViewList | Represents a list of objects on a selection list |
NXOpen.Drawings.SelectDrawingRegion | Represents a single object selection |
NXOpen.Drawings.SelectDrawingView | Represents a single object selection |
NXOpen.Drawings.SelectDrawingViewList | Represents a list of objects on a selection list |
NXOpen.Drawings.SelectModelViewBuilder | Represents a Select Model View builder that selects a model view |
NXOpen.Drawings.SelectSectionLine | Represents a single object selection |
NXOpen.Drawings.SettingsBuilder | Represents a Drawings.SettingsBuilder |
NXOpen.Drawings.SheetBorderSettingsBuilder | Represents a NXOpen.Drawings.SheetBorderSettingsBuilder |
NXOpen.Drawings.SheetMarginSettingsBuilder | Represents the Drawing Sheet Margins Style Builder |
NXOpen.Drawings.SheetZoneSettingsBuilder | Represents the Drawing Sheet Zone Setting Style Builder |
NXOpen.Drawings.ShipDraftingViewLinesBuilder | Represents a ship view lines block |
NXOpen.Drawings.SpecifySectionLineBuilder | Select a section line |
NXOpen.Drawings.SteppedSectionLineBuilder | Represents a NXOpen.Drawings.SteppedSectionLineBuilder |
NXOpen.Drawings.SvtBuilder | Represents a NXOpen.Drawings.SvtBuilder |
NXOpen.Drawings.TrackDrawingChangesGeneralBuilder | Represents a NXOpen.Drawings.TrackDrawingChangesGeneralBuilder |
NXOpen.Drawings.TrackDrawingChangesReportFilterBuilder | Represents a Drawings.TrackDrawingChangesReportFilterBuilder |
NXOpen.Drawings.View2dOrientBuilder | Represents the View 2D Orientation (Drawings |
NXOpen.Drawings.ViewBoundaryBuilder | Represents the View Boundary (Drawings |
NXOpen.Drawings.ViewBreakBuilder | Represents a NXOpen.Drawings.ViewBreakBuilder |
NXOpen.Drawings.ViewCenterCoordinateBuilder | Represents the View center coodinate (Drawings |
NXOpen.Drawings.ViewCommonViewLabelBuilder | Represents a NXOpen.Drawings.ViewCommonViewLabelBuilder |
NXOpen.Drawings.ViewDetailLabelBuilder | Represents a NXOpen.Drawings.ViewDetailLabelBuilder |
NXOpen.Drawings.ViewLabelBuilder | Represents a NXOpen.Drawings.ViewLabelBuilder |
NXOpen.Drawings.ViewProjectedLabelBuilder | Represents a NXOpen.Drawings.ViewProjectedLabelBuilder |
NXOpen.Drawings.ViewOrientationBuilder | Represents a ViewOrientationBuilder |
NXOpen.Drawings.ViewPlacementBuilder | Represents a NXOpen.Drawings.ViewPlacementBuilder |
NXOpen.Drawings.ViewProjectedArrowSettingsBuilder | Represents a NXOpen.Drawings.ViewProjectedArrowSettingsBuilder |
NXOpen.Drawings.ViewProjectedViewSettingsBuilder | Represents a NXOpen.Drawings.ViewProjectedViewSettingsBuilder |
NXOpen.Drawings.ViewProjectionPlaneBuilder | Represents the View Projection Plane (Drawings |
NXOpen.Drawings.ViewScaleBuilder | Represents the View Scale (Drawings |
NXOpen.Drawings.ViewSectionLabelBuilder | Represents a NXOpen.Drawings.ViewSectionLabelBuilder |
NXOpen.Drawings.ViewSectionLineBuilder | Represents a NXOpen.Drawings.ViewSectionLineBuilder |
NXOpen.Drawings.ViewSettingsBuilder | Represents a Drawings.ViewSettingsBuilder |
NXOpen.Drawings.ViewStyleBaseBuilder | Represents the BASE tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleBuilder | Represents the View Style Builder (Drawings |
NXOpen.Drawings.ViewStyleDetailBuilder | Represents the DETAIL tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleFPCalloutConfigBuilder | Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleFPCalloutsBuilder | Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleFPCurvesBuilder | Represents the Curve section of the Flat Pattern tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleGeneralBuilder | Represents view style general builder (Drawings |
NXOpen.Drawings.ViewStyleHiddenLinesBuilder | Represents the HIDDEN LINES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleInheritPmiBuilder | Represents the INHERIT PMI tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleOrientationBuilder | Represents the ORIENTATION tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStylePerspectiveBuilder | Represents the PERSPECTIVE tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleProjectedBuilder | Represents the PROJECTED tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleSecondaryComponentsBuilder | Represents the Secondary Geometry tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleSectionBuilder | Represents the SECTION tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleSectionConstraintsBuilder | Represents the SECTION CONSTRAINTS tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleShadingBuilder | Represents the SHADING tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleShipbuildingLinesBuilder | Represents the Shipbuilding LINES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleSmoothEdgesBuilder | Represents the SMOOTH EDGES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleThreadsBuilder | Represents the THREADS tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleTraceLinesBuilder | Represents the TRACE LINES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleVirtualIntersectionsBuilder | Represents the VIRTUAL INTERSECTIONS tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleVisibleLinesBuilder | Represents the VISIBLE LINES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewWorkflowBuilder | Represents a NXOpen.Drawings.ViewWorkflowBuilder |
NXOpen.Drawings.VisibleAndHiddenLinesColorFontWidthBuilder | Represent a NXOpen.Drawings.VisibleAndHiddenLinesColorFontWidthBuilder |
NXOpen.Drawings.VisualDrawingComparePrefsBuilder | This class gets and sets components of Visual Overlay in Drafting Preferences |
NXOpen.EndCutBlockBuilder | Represents a End Cut Block Builder |
NXOpen.Facet.SelectFacetedBody | Represents a single object selection |
NXOpen.Facet.SelectFacetedBodyList | Represents a list of objects on a selection list |
NXOpen.Features.CurveFinderBuilder | Represents a collection of curves and their relationships to other curves in the model |
NXOpen.Features.FaceRecognitionBuilder | Represents a collection of faces and their relationships to other faces in the model |
NXOpen.Features.FeatureReferencesBuilder | Represents a NXOpen.Features.FeatureReferencesBuilder |
NXOpen.Features.GlobalShapingCurveOffsetBuilder | The class used to define the curves and offset laws needed for the target curve list |
NXOpen.Features.GlobalShapingPointOffsetBuilder | The class used to define the points and offsets needed for the target point list |
NXOpen.Features.MatchedReferenceBuilder | Represents a NXOpen.Features.MatchedReferenceBuilder |
NXOpen.Features.SelectBodyFeatureList | Represents a list of objects on a selection list |
NXOpen.Features.SelectDatumCsysList | Represents a list of objects on a selection list |
NXOpen.Features.SelectFeature | Represents a single object selection |
NXOpen.Features.SelectFeatureList | Represents a list of objects on a selection list |
NXOpen.Features.SelectFlatPattern | Represents a single object selection |
NXOpen.Features.SelectPartModule | Represents a single object selection |
NXOpen.Features.SheetMetal.ConvertInputListItemBuilder | Represents a Sheetmetal convert to sheet metal corner list item builder class |
NXOpen.Features.SheetMetal.CornerTreatmentBuilder | The CornerTreatmentBuilder class is used to manage a builder object for a corner treatment in the flat solid and flat pattern dialogs |
NXOpen.Features.SheetMetal.HoleTreatmentBuilder | The HoleTreatmentBuilder class is used to manage a builder object for a hole treatment in the flat pattern dialogs |
NXOpen.Features.SheetMetal.JoggleInputListItemBuilder | Represents a Sheetmetal joggle input list item builder class |
NXOpen.Features.SheetMetal.JoggleSideOptionsBuilder | Represents a Sheetmetal Joggle side Options class |
NXOpen.Features.SheetMetal.SheetmetalComponentBuilder | Represents a sheet metal component builder to be used in the creation and modification of features componenets |
NXOpen.Features.SheetMetal.FeatureBendPropertiesBuilder | Represents a Sheetmetal Feature bend properties builder class |
NXOpen.Features.SheetMetal.FlangeBendPropertiesBuilder | Represents a Sheetmetal Flange Bend Properties builder class |
NXOpen.Features.SheetMetal.MultiBendBendPropertiesBuilder | Represents a Sheetmetal Multi Bend properties builder class |
NXOpen.Features.SheetMetal.FeatureBendPropertiesListBuilder | Represents a Sheetmetal Feature properties List builder class |
NXOpen.Features.SheetMetal.FlangeBendPropertiesListBuilder | Represents a Sheetmetal Feature properties List builder class |
NXOpen.Features.SheetMetal.MultiBendBendPropertiesListBuilder | Represents a Sheetmetal Multi Bend properties List builder class |
NXOpen.Features.SheetMetal.SMBoundaryConditionBuilder | Represents a Boundary condition object for Metaform |
NXOpen.Features.ShipDesign.BuiltUpBlockBuilder | Represents a NXOpen.Features.ShipDesign.BuiltUpBlockBuilder |
NXOpen.Features.ShipDesign.BuiltUpOffsetBuilder | Represents a NXOpen.Features.ShipDesign.BuiltUpOffsetBuilder |
NXOpen.Features.ShipDesign.DeckListBuilder | This builder allows you to define the general arrangement view information |
NXOpen.Features.ShipDesign.DrawingPartBuilder | Represents a NXOpen.Features.ShipDesign.DrawingPartBuilder |
NXOpen.Features.ShipDesign.DrawingSheetBuilder | Represents a NXOpen.Features.ShipDesign.DrawingSheetBuilder |
NXOpen.Features.ShipDesign.DrawingTemplateBuilder | Represents a drawing template selection block |
NXOpen.Features.ShipDesign.OrientationAngleMethodsBuilder | This class defines the method of angle definition used in the definition of the region's orientation |
NXOpen.Features.ShipDesign.OrientationPointMethodsBuilder | This class is used to define the boundary of the regions when definining the orientation of a profile |
NXOpen.Features.ShipDesign.ReadDataSetBuilder | This class will read a data set file from Team Center |
NXOpen.Features.ShipDesign.RoomAttributeListBuilder | The builder to define room attributes |
NXOpen.Features.ShipDesign.SelectPartBuilder | Represents a NXOpen.Features.ShipDesign.SelectPartBuilder |
NXOpen.Features.ShipDesign.SelectStructuresBuilder | This builder allows you to select structures in NXOpen.Features.ShipDesign.GeneralArrangementViewBuilder |
NXOpen.Features.ShipDesign.ShipNameFieldBuilder | A field, combined with other fields, to generate a name for a Ship Basic Design Object such as a Deck |
NXOpen.Features.ShipDesign.ShipNamesBuilder | This class provides the mechanism for defining the names of Basic Design objects such as Decks, Bulkheads, Stiffener Systems, etc |
NXOpen.Features.ShipDesign.ShipNamesListBuilder | This class provides a list of NXOpen.Features.ShipDesign.ShipNamesBuilder objects |
NXOpen.Features.ShipDesign.ShipStructureBuilder | Represents a NXOpen.Features.ShipDesign.ShipStructureBuilder |
NXOpen.Features.ShipDesign.SteelInsulationBoundaryBuilder | Represents a Steel Insulation Boundary builder |
NXOpen.Features.ShipDesign.StiffenerBySupportPathBuilder | This class defines the builder to collect stiffener by support path data for Stiffener feature |
NXOpen.Features.ShipDesign.StiffenerLimitBuilder | This class defines the path limit method used by a Stiffener or Edge Reinforcement feature |
NXOpen.Features.ShipDesign.StiffenerStockBuilder | This class defines the Profile or Plate stock for a Stiffener or Edge Reinforcement feature |
NXOpen.Features.SmoothRangeBuilder | Represents a NXOpen.Features.SmoothRangeBuilder builder |
NXOpen.Features.Subdivision.CageSectionData | Represents subdivision cage section selection |
NXOpen.Features.Subdivision.SelectCageObjectData | Represents subdivision cage topology object selection |
NXOpen.Features.Subdivision.CageManipulatorData | Subdivision cage manipulation tool |
NXOpen.Features.Subdivision.SelectSubdivisionBodyList | Represents a list of objects on a selection list |
NXOpen.Features.TabNoteCfgBuilder | Represents a NXOpen.Features.TabNoteCfgBuilder |
NXOpen.Features.VariableRadiusPointsBuilder | Represents a NXOpen.Features.VariableRadiusPointsBuilder builder |
NXOpen.Features.VehicleDesign.CloseRangeBlindVolumeListItemBuilder | Represents the builder to create blind volume list item used for close range visibility |
NXOpen.Features.VehicleDesign.CloseRangeCameraListItemBuilder | Represents the builder to create camera list item used for close range visibility |
NXOpen.Features.VehicleDesign.CloseRangeDemoCylinderListItemBuilder | Represents the builder to create demo cylinder list item used for close range visibility |
NXOpen.Features.VehicleDesign.HeadImpactAPillarDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactAPillarDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactAPillarWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactAPillarWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactBPillarDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactBPillarDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactBPillarWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactBPillarWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOPillarDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOPillarDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOPillarWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOPillarWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOtherRailDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOtherRailDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOtherRailWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOtherRailWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRearHeaderDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRearHeaderDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRearHeaderWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRearHeaderWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRPillarDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRPillarDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRPillarWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRPillarWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactSideRailWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactSideRailWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactUpperRoofDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactUpperRoofDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactUpperRoofWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactUpperRoofWizardBuilder |
NXOpen.GeometricAnalysis.DupinBuilder | The Dupin Indicatrix is a tool to geometrically display the surface curvature at a specified point on a surface |
NXOpen.GeometricAnalysis.FaceAnalysisDataRangeBuilder | Represents data range functions used by Face Analysis |
NXOpen.GeometricAnalysis.FaceAnalysisDisplayBuilder | Represents a set of display settings used by Face Analysis |
NXOpen.GeometricAnalysis.FaceAnalysisNormalsBuilder | Represents reverse normal functions used by Face Analysis |
NXOpen.GeometricAnalysis.SectionAnalysis.CircularGridBuilder | Represents the circular grid section specifications for a NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.CurveAlignedBuilder | Represents the Curve Aligned specification for a NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.GridSpacingBuilder | Represents the grid spacing for certain types of section specifications for the NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.InteractiveBuilder | Represents the Interactive specification for a NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.IsoparametricBuilder | Represents the Isoparametric specification for a GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.ParallelPlanesExBuilder | Represents the Parallel Plane specification for a GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.QuadrilateralGridBuilder | Represents the quadrilateral grid section specifications for a GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.RadialBuilder | Represents the Radial specification for a GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.SectionPlaneBuilder | Represents a plane which is used to cut sections on faces or facet bodies |
NXOpen.GeometricAnalysis.SectionAnalysis.TriangularGridBuilder | Represents the triangular grid section specifications for a SectionAnalysisBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.XYZPlaneBuilder | Represents the XYZ Plane specification for a GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricUtilities.AlignmentMethodBuilder | Represents a NXOpen.GeometricUtilities.AlignmentMethodBuilder |
NXOpen.GeometricUtilities.AlongPathPattern | the AlongPath pattern definition |
NXOpen.GeometricUtilities.AlongSpineBuilder | Represents a NXOpen.GeometricUtilities.AlongSpineBuilder |
NXOpen.GeometricUtilities.AnchorLocatorBuilder | Represents a NXOpen.GeometricUtilities.AnchorLocatorBuilder |
NXOpen.GeometricUtilities.BetweenLocationsData | Represents a NXOpen.GeometricUtilities.BetweenLocationsData |
NXOpen.GeometricUtilities.BlendLimitsData | Represents a NXOpen.GeometricUtilities.BlendLimitsData |
NXOpen.GeometricUtilities.BlendSetbackBuilder | This class provides ability to define a setback curve on a blend face |
NXOpen.GeometricUtilities.BlendStopshortBuilder | Represents a NXOpen.GeometricUtilities.BlendStopshortBuilder |
NXOpen.GeometricUtilities.BooleanOperation | Represents a boolean operation |
NXOpen.GeometricUtilities.BooleanRegionSelect | a class which defines boolean region select |
NXOpen.GeometricUtilities.BooleanToolBuilder | a class which defines boolean tool builder |
NXOpen.GeometricUtilities.BoundaryDefinitionBuilder | Represents a NXOpen.GeometricUtilities.BoundaryDefinitionBuilder |
NXOpen.GeometricUtilities.BoundingObjectBuilder | Represents a NXOpen.GeometricUtilities.BoundingObjectBuilder |
NXOpen.GeometricUtilities.BridgeCurveConnectivity | Data offering connectivity controls for NXOpen.Features.BridgeCurveBuilderEx |
NXOpen.GeometricUtilities.CircularCrossSection | Represents a circular section data for face blend |
NXOpen.GeometricUtilities.CircularPattern | the circular pattern definition |
NXOpen.GeometricUtilities.ColorCodedRegionBuilder | Represents a NXOpen.GeometricUtilities.ColorCodedRegionBuilder |
NXOpen.GeometricUtilities.CombOptionsBuilder | Represents a NXOpen.GeometricUtilities.CombOptionsBuilder |
NXOpen.GeometricUtilities.ConicCrossSection | Represents a conic section data for face blend |
NXOpen.GeometricUtilities.Continuity | Represents a NXOpen.GeometricUtilities.Continuity Allows user to specify continuity constraint surface construction |
NXOpen.GeometricUtilities.ControlPoleManagerData | This class manages the control poles for a set of surfaces or curves |
NXOpen.GeometricUtilities.CurveExtendData | Represents a NXOpen.GeometricUtilities.CurveExtendData |
NXOpen.GeometricUtilities.CurveExtensionBuilder | Spline extension builder class |
NXOpen.GeometricUtilities.CurveFitData | Represents the curve fitting methods options |
NXOpen.GeometricUtilities.CurveFitJoin | Represents the curve fit join data |
NXOpen.GeometricUtilities.CurveFitOptions | Represents the curve fit data |
NXOpen.GeometricUtilities.CurveLengthBuilder | Represents a NXOpen.GeometricUtilities.CurveLengthBuilder builder |
NXOpen.GeometricUtilities.CurveLengthData | Represents an CurveLength data |
NXOpen.GeometricUtilities.CurveLimitsData | Represents a NXOpen.GeometricUtilities.CurveLimitsData |
NXOpen.GeometricUtilities.CurveOptions | Represents the curve options data |
NXOpen.GeometricUtilities.CurveRangeBuilder | Represents the curve range and anchor builder |
NXOpen.GeometricUtilities.CurveSettings | Represents the curve settings data |
NXOpen.GeometricUtilities.CurveShapingBuilder | Represents a NXOpen.GeometricUtilities.CurveShapingBuilder |
NXOpen.GeometricUtilities.DegreesAndSegmentsOrPatchesBuilder | the DegreesAndSegmentsOrPatches builder |
NXOpen.GeometricUtilities.DepthSkewBuilder | This class provides ability to specify a depth and a skew value |
NXOpen.GeometricUtilities.DisplayResolutionBuilder | Represents a NXOpen.GeometricUtilities.DisplayResolutionBuilder |
NXOpen.GeometricUtilities.DraftPointData | Represents a draft point data object |
NXOpen.GeometricUtilities.DraftVariableAngleData | Represents data containing variable angle draft point data objects |
NXOpen.GeometricUtilities.EndHoleData | Represents a NXOpen.GeometricUtilities.EndHoleData |
NXOpen.GeometricUtilities.EntityUsageInfo | Represents a NXOpen.GeometricUtilities.EntityUsageInfo |
NXOpen.GeometricUtilities.Extend | Represents an extend data |
NXOpen.GeometricUtilities.ExtrudeRevolveToolBuilder | a class which is a sub-component of BooleanTool |
NXOpen.GeometricUtilities.FaceChangeOverflowBehavior | Represents a NXOpen.GeometricUtilities.FaceChangeOverflowBehavior It provides several face change options for controlling behavior when a change face overflows an incident face |
NXOpen.GeometricUtilities.FacePlaneSelectionBuilder | Represents a NXOpen.GeometricUtilities.FacePlaneSelectionBuilder |
NXOpen.GeometricUtilities.FacePlaneToolBuilder | a sub-component of BooleanToolBuilder |
NXOpen.GeometricUtilities.FaceSetData | Represents a NXOpen.GeometricUtilities.FaceSetData |
NXOpen.GeometricUtilities.FeatureOffset | Represents a Offset |
NXOpen.GeometricUtilities.FeatureOptions | Represents various options supported on features |
NXOpen.GeometricUtilities.FlowDirection | Represents a NXOpen.GeometricUtilities.FlowDirection Allows user to specify different flow direction to control output surface shape |
NXOpen.GeometricUtilities.FrameOnPathBuilder | Frame on path builder |
NXOpen.GeometricUtilities.GeneralPattern | the General pattern definition |
NXOpen.GeometricUtilities.GeometryLocationData | Represents a NXOpen.GeometricUtilities.GeometryLocationData |
NXOpen.GeometricUtilities.HelixPattern | the Helix pattern definition |
NXOpen.GeometricUtilities.HorizontalReference | the horizontal reference vector definition |
NXOpen.GeometricUtilities.InstanceEditedExpressionItem | edited value of one master expression of the input object(s) being patterned |
NXOpen.GeometricUtilities.InstanceEditedExpressionsList | list of NXOpen.GeometricUtilities.InstanceEditedExpressionItem objects |
NXOpen.GeometricUtilities.InteractiveSectionBuilder | Represents a NXOpen.GeometricUtilities.InteractiveSectionBuilder |
NXOpen.GeometricUtilities.LawBuilder | Represents a LawBuilder |
NXOpen.GeometricUtilities.Limits | Represents a limits data |
NXOpen.GeometricUtilities.AngularLimits | Represents a angular limts data |
NXOpen.GeometricUtilities.LinearLimits | Represents a limits data |
NXOpen.GeometricUtilities.PathLimits | Represents a path limits data |
NXOpen.GeometricUtilities.MiddleHoleData | Represents a NXOpen.GeometricUtilities.MiddleHoleData |
NXOpen.GeometricUtilities.MirrorPattern | the Mirror pattern definition |
NXOpen.GeometricUtilities.ModlAlongCurveAngle | This class NXOpen.GeometricUtilities.ModlAlongCurveAngle represents motion type in ModlMotion |
NXOpen.GeometricUtilities.ModlDistanceAngle | Represents a NXOpen.GeometricUtilities.ModlDistanceAngle |
NXOpen.GeometricUtilities.ModlMotion | Represents a NXOpen.GeometricUtilities.ModlMotion |
NXOpen.GeometricUtilities.MovePoleBuilder | This class manages the control poles movements for a surface or curve |
NXOpen.GeometricUtilities.MultiTransitionLawBuilder | Represents multiple transition law |
NXOpen.GeometricUtilities.NonInflectingLawBuilder | Represents a non-inflecting law |
NXOpen.GeometricUtilities.OnPathDimensionBuilder | Builds an on-path dimension |
NXOpen.GeometricUtilities.OnPathDimWithValueBuilder | Represents a NXOpen.GeometricUtilities.OnPathDimWithValueBuilder |
NXOpen.GeometricUtilities.ScalingSetBuilder | Represents a NXOpen.GeometricUtilities.ScalingSetBuilder |
NXOpen.GeometricUtilities.TransitionLawNodeBuilder | Represents a law node with transition type |
NXOpen.GeometricUtilities.OrientationMethodBuilder | Represents a NXOpen.GeometricUtilities.OrientationMethodBuilder |
NXOpen.GeometricUtilities.ParentEquivalencyMap | Represents a NXOpen.GeometricUtilities.ParentEquivalencyMap |
NXOpen.GeometricUtilities.PartModuleReferencesBuilder | Represents a NXOpen.GeometricUtilities.PartModuleReferencesBuilder |
NXOpen.GeometricUtilities.PatternClocking | enables the ability to apply delta transforms on individual instances of a pattern |
NXOpen.GeometricUtilities.PatternDefinition | pattern spacing for several pattern based commands |
NXOpen.GeometricUtilities.PatternFill | the pattern fill definition |
NXOpen.GeometricUtilities.PatternIncrementItem | variational for one master expression of the input object(s) being patterned |
NXOpen.GeometricUtilities.PatternIncrementsBuilder | pattern increments builder |
NXOpen.GeometricUtilities.PatternIncrementsList | list of NXOpen.GeometricUtilities.PatternIncrementItem objects |
NXOpen.GeometricUtilities.PatternOrientation | the pattern orientation definition |
NXOpen.GeometricUtilities.PatternReferencePointServiceBuilder | Pattern Reference Point is a service which enables the employing client to compute the reference point for pattern instance locations |
NXOpen.GeometricUtilities.PatternSpacing | defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
NXOpen.GeometricUtilities.AngularPatternSpacing | defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
NXOpen.GeometricUtilities.DistancePatternSpacing | defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
NXOpen.GeometricUtilities.OnPathDistancePatternSpacing | defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
NXOpen.GeometricUtilities.PolygonPatternSpacing | defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
NXOpen.GeometricUtilities.PatternSpacingsList | list of NXOpen.GeometricUtilities.PatternSpacingsListItem objects |
NXOpen.GeometricUtilities.PatternSpacingsListItem | one pattern spacing in the spacings list |
NXOpen.GeometricUtilities.PlayButtonsBuilder | VCR buttons for any dialog that needs them |
NXOpen.GeometricUtilities.PolygonPattern | the polygon pattern definition |
NXOpen.GeometricUtilities.ProjectionOptions | Represents a ProjectionOptions |
NXOpen.GeometricUtilities.Rebuild | Represents a NXOpen.GeometricUtilities.Rebuild |
NXOpen.GeometricUtilities.RectangularFrameBuilder | Rectangular frame builder |
NXOpen.GeometricUtilities.RectangularPattern | the rectangular pattern definition |
NXOpen.GeometricUtilities.ReferencePattern | the reference pattern definition |
NXOpen.GeometricUtilities.RefitControlBuilder | This class is used to specify the parameter set to refit faces |
NXOpen.GeometricUtilities.RegionTracker | a class which collects all the geometric entities used to identify a region of faces during a boolean feature |
NXOpen.GeometricUtilities.ReplAsstBuilder | Represents a NXOpen.GeometricUtilities.ReplAsstBuilder |
NXOpen.GeometricUtilities.RotationSetBuilder | Represents a NXOpen.GeometricUtilities.RotationSetBuilder |
NXOpen.GeometricUtilities.SaveConstraintsBuilder | Represents a builder for a Save Constraints |
NXOpen.GeometricUtilities.ScalingMethodBuilder | Represents a NXOpen.GeometricUtilities.ScalingMethodBuilder |
NXOpen.GeometricUtilities.SectionPlaneData | Represents a Section Plane Data class This class acts like a container to hold the data needed to create a plane |
NXOpen.GeometricUtilities.SelectDividingObjectBuilder | Represents the dividing tool block for dividing face |
NXOpen.GeometricUtilities.ShapeFrameBuilder | Represents a NXOpen.GeometricUtilities.ShapeFrameBuilder |
NXOpen.GeometricUtilities.CircularFrameBuilder | Represents a NXOpen.GeometricUtilities.CircularFrameBuilder |
NXOpen.GeometricUtilities.QuadrilateralFrameBuilder | Represents a NXOpen.GeometricUtilities.QuadrilateralFrameBuilder |
NXOpen.GeometricUtilities.TriangularFrameBuilder | Represents a NXOpen.GeometricUtilities.TriangularFrameBuilder |
NXOpen.GeometricUtilities.SimpleDraft | Represents an Offset |
NXOpen.GeometricUtilities.MultiDraft | Represents a multi-draft |
NXOpen.GeometricUtilities.SmartVolumeProfileBuilder | This class contains the options for automatically closing the profile to surrounding model geometry |
NXOpen.GeometricUtilities.SpineDefinitionBuilder | Provides a spine definition for modeling operations |
NXOpen.GeometricUtilities.SpinePointData | Represents a spine point def object |
NXOpen.GeometricUtilities.SpiralPattern | the Spiral pattern definition |
NXOpen.GeometricUtilities.SplineExtensionBuilder | Spline extension builder class |
NXOpen.GeometricUtilities.SShapedLawBuilder | Represents a s-shaped law |
NXOpen.GeometricUtilities.StartHoleData | Represents a NXOpen.GeometricUtilities.StartHoleData |
NXOpen.GeometricUtilities.StepOptionBehavior | Represents a NXOpen.GeometricUtilities.StepOptionBehavior It provides several step options for controlling behavior when move face and so on |
NXOpen.GeometricUtilities.StyledSweepDoubleOnPathDimBuilder | Represents a NXOpen.GeometricUtilities.StyledSweepDoubleOnPathDimBuilder |
NXOpen.GeometricUtilities.StyledSweepReferenceMethodBuilder | Represents a NXOpen.GeometricUtilities.StyledSweepReferenceMethodBuilder |
NXOpen.GeometricUtilities.SupportPlaneData | Represents a NXOpen.GeometricUtilities.SupportPlaneData |
NXOpen.GeometricUtilities.SurfaceRangeBuilder | Represents the surface range and anchor builder |
NXOpen.GeometricUtilities.TangentMagnitudeBuilder | This class provides ability to specify the start and end tangent magnitude values |
NXOpen.GeometricUtilities.TransformerData | Transformation and orientation tool |
NXOpen.GeometricUtilities.TransitionCurveBuilder | This class provides ability to create a transition(bridge) curve between two adjacent setback curves |
NXOpen.Layout2d.AssemblyCreationSettingsBuilder | Represents a NXOpen.Layout2d.AssemblyCreationSettingsBuilder |
NXOpen.Layout2d.ComponentNameBuilder | This class is used to construct the component name and part file name block, if it is in manage mode, we also have item number, item revision and item name |
NXOpen.Layout2d.ComponentSettingsBlockBuilder | Represents the Component Settings Button (Layout2d |
NXOpen.Layout2d.ComponentSettingsBuilder | Represents a NXOpen.Layout2d.ComponentSettingsBuilder This builder stores the information of the 2D Component settings |
NXOpen.Layout2d.CreateComponentFrom3DSettingsBuilder | Represents a NXOpen.Layout2d.CreateComponentFrom3DSettingsBuilder |
NXOpen.Layout2d.GeneralPreferencesBuilder | Represents a NXOpen.Layout2d.GeneralPreferencesBuilder This builder stores the general layout preferences |
NXOpen.Layout2d.SelectComponent | Represents a single object selection |
NXOpen.Layout2d.SelectComponentList | Represents a list of objects on a selection list |
NXOpen.LineColorFontWidthBuilder | Represent a NXOpen.LineColorFontWidthBuilder |
NXOpen.LineDesigner.JigOnPlaneBuilder | Jig on plane |
NXOpen.LineDesigner.PickRectanglePointsBuilder | Pick Rectangle Points |
NXOpen.LineFontBuilder | Represent a NXOpen.LineFontBuilder |
NXOpen.LineWidthBuilder | Represents a NXOpen.LineWidthBuilder |
NXOpen.MechanicalRouting.BaseCornerTypeBuilder | Builder class for Base Corner Types |
NXOpen.MechanicalRouting.BendCornerTypeBuilder | Contains setting for corner creation |
NXOpen.MechanicalRouting.CornerBuilder | Builder class for Corner Block |
NXOpen.MechanicalRouting.PathStockPreferenceBuilder | Assigns stocks to segments based on user's criteria and the current default stock |
NXOpen.Mechatronics.PathConstraintFrameBuilder | Represents a frame that constrains the orientation along the path curve |
NXOpen.Mechatronics.SelectAdapterSignal | Represents a single object selection |
NXOpen.Mechatronics.SelectCollisionSensor | Represents a single object selection |
NXOpen.Mechatronics.SelectCollisionSensorList | Represents a list of objects on a selection list |
NXOpen.Mechatronics.SelectHydraulicCylinderList | Represents a list of objects on a selection list |
NXOpen.Mechatronics.SelectLogicObjectList | Represents a list of objects on a selection list |
NXOpen.Mechatronics.SelectPhysicsConstraint | Represents a single object selection |
NXOpen.Mechatronics.SelectPhysicsJoint | Represents a single object selection |
NXOpen.Mechatronics.SelectPneumaticCylinderList | Represents a list of objects on a selection list |
NXOpen.Mechatronics.SelectRigidBody | Represents a single object selection |
NXOpen.Mechatronics.SelectSystemObject | Represents a single object selection |
NXOpen.Mechatronics.SelectTagFormObject | Represents a single object selection |
NXOpen.ModlDirect.SelectBlend | Represents a NXOpen.ModlDirect.SelectBlend Allows user to specify blend faces |
NXOpen.Motion.BushingActuatorCoefficients | Represents a Motion BushingActuatorCoefficients |
NXOpen.Motion.BushingCoefficients | Represents a Motion BushingCoefficients |
NXOpen.Motion.BushingCylindricalCoefficients | Represents a Motion BushingCylindricalCoefficients |
NXOpen.Motion.BushingCylindricalCoefficientsComponent | Represents a Motion BushingCylindricalCoefficientsComponent |
NXOpen.Motion.BushingDampingCoefficients | Represents a Motion BushingDampingCoefficients |
NXOpen.Motion.BushingDefine | Represents a Motion BushingDefine |
NXOpen.Motion.BushingGeneralCoefficients | Represents a Motion BushingGeneralCoefficients |
NXOpen.Motion.BushingGeneralCoefficientsComponent | Represents a Motion BushingGeneralCoefficientsComponent |
NXOpen.Motion.BushingSphericalCoefficients | Represents a Motion BushingSphericalCoefficients |
NXOpen.Motion.BushingSphericalCoefficientsComponent | Represents a Motion BushingSphericalCoefficientsComponent |
NXOpen.Motion.BushingStiffnessCoefficients | Represents a Motion BushingStiffnessCoefficients |
NXOpen.Motion.ConfigurationParameter | Represents a Motion.ConfigurationParameter |
NXOpen.Motion.ConfigurationFloatParameter | Represents a Motion.ConfigurationFloatParameter |
NXOpen.Motion.ConfigurationIntegerParameter | Represents a Motion.ConfigurationIntegerParameter |
NXOpen.Motion.ConfigurationTextParameter | Represents a Motion.ConfigurationTextParameter |
NXOpen.Motion.ControlInputPortBuilder | Represents a Motion.ControlPort builder specific to control input element |
NXOpen.Motion.CustomizedMaterialBuilder | Represents a Motion.CustomizedMaterialBuilder |
NXOpen.Motion.DriverMotionsData | Represents a NXOpen.Motion.DriverMotionsData |
NXOpen.Motion.ExpressionFunctionBuilder | Represents a ExpressionFunctionBuilder builder |
NXOpen.Motion.LinkAttachmentData | Represents a Motion.LinkAttachmentData |
NXOpen.Motion.LinkCouplerCoupleBuilder | Represents a NXOpen.Motion.LinkCouplerCoupleBuilder |
NXOpen.Motion.MarkerToNodeData | Represents the marker to node data which is a list item in NXOpen.Motion.FlexBodyBuilder |
NXOpen.Motion.PortAssociation | Represents a Motion.PortAssociation |
NXOpen.Motion.InputPortAssociation | Represents a Motion.InputPortAssociation |
NXOpen.Motion.OutputPortAssociation | Represents a Motion.OutputPortAssociation |
NXOpen.Motion.PortVariable | Represents a Motion.PortVariable |
NXOpen.Motion.SegmentBuilder | Represents a NXOpen.Motion.SegmentBuilder , only creation is supported |
NXOpen.Motion.SelectAnalyticalContactProperty | Represents a single object selection |
NXOpen.Motion.SelectBaseSection | Represents a single object selection |
NXOpen.Motion.SelectControlPort | Represents a single object selection |
NXOpen.Motion.SelectFieldData | Represents a single object selection |
NXOpen.Motion.SelectJoint | Represents a single object selection |
NXOpen.Motion.SelectLink | Represents a single object selection |
NXOpen.Motion.SelectMarker | Represents a single object selection |
NXOpen.Motion.SelectRoad | Represents a single object selection |
NXOpen.Motion.SelectSplineBeamProperty | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyBasic | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyCd | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyFt | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyMotorcycle | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyNonInertial | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyTno | Represents a single object selection |
NXOpen.Motion.SignalChartListItem | Represents a SignalChartListItem, List Item inside a SignalChartBuilder |
NXOpen.Motion.TirePropertyAdvancedParameters | Represents a TirePropertyAdvancedParameters builder |
NXOpen.Motion.TirePropertyBasicParameters | Represents a TirePropertyBasicParameters builder |
NXOpen.Motion.TirePropertyHighOrderParameters | Represents a Tire Property builder for the High Order parameters used in Motorcycle and Basic properties |
NXOpen.PDM.EffectivityTableBuilder | Represents a builder class for effectivity configuration |
NXOpen.PDM.VariantConfigurationBuilder | Represents a builder class that performs variant rule configuration |
NXOpen.PID.PreferencesAnnotationBuilder | Represents a PreferencesAnnotationBuilder |
NXOpen.PID.PreferencesConnectionBuilder | Represents a PreferencesConnectionBuilder |
NXOpen.PID.PreferencesGeneralBuilder | Represents a PreferencesGeneralBuilder |
NXOpen.PID.PreferencesOffSheetConnectorBuilder | Represents a PreferencesOffSheetConnectorBuilder |
NXOpen.Routing.CornerTypeBuilder | Contains setting for corner creation |
NXOpen.Routing.RouteObjectCollector | Represents a NXOpen.Routing.RouteObjectCollector class to create objects for getting routing objects |
NXOpen.Routing.SelectControlPoint | Represents a single object selection |
NXOpen.Routing.SelectISegment | Represents a single object selection |
NXOpen.Routing.SelectLineSegment | Represents a single object selection |
NXOpen.Routing.SelectPort | Represents a single object selection |
NXOpen.Routing.SelectRun | Represents a single object selection |
NXOpen.Routing.SelectStock | Represents a single object selection |
NXOpen.SelectBody | Represents a single object selection |
NXOpen.SelectBodyList | Represents a list of objects on a selection list |
NXOpen.SelectCartesianCoordinateSystem | Represents a single object selection |
NXOpen.SelectCoordinateSystem | Represents a single object selection |
NXOpen.SelectCoordinateSystemList | Represents a list of objects on a selection list |
NXOpen.SelectCurve | Represents a single object selection |
NXOpen.SelectCurveList | Represents a list of objects on a selection list |
NXOpen.SelectDatumPlane | Represents a single object selection |
NXOpen.SelectDatumPlaneList | Represents a list of objects on a selection list |
NXOpen.SelectDisplayableObject | Represents a single object selection |
NXOpen.SelectDisplayableObjectList | Represents a list of objects on a selection list |
NXOpen.SelectEdge | Represents a single object selection |
NXOpen.SelectEdgeList | Represents a list of objects on a selection list |
NXOpen.SelectExpressionList | Represents a list of objects on a selection list |
NXOpen.SelectFace | Represents a single object selection |
NXOpen.SelectFaceList | Represents a list of objects on a selection list |
NXOpen.SelectGroup | Represents a single object selection |
NXOpen.SelectIBaseCurve | Represents a single object selection |
NXOpen.SelectIBaseCurveList | Represents a list of objects on a selection list |
NXOpen.SelectIBasePlaneList | Represents a list of objects on a selection list |
NXOpen.SelectIBody | Represents a single object selection |
NXOpen.SelectICurve | Represents a single object selection |
NXOpen.SelectICurveList | Represents a list of objects on a selection list |
NXOpen.SelectINXObjectList | Represents a list of objects on a selection list |
NXOpen.SelectIParameterizedSurface | Represents a single object selection |
NXOpen.SelectIParameterizedSurfaceList | Represents a list of objects on a selection list |
NXOpen.SelectIReferenceAxis | Represents a single object selection |
NXOpen.SelectISurface | Represents a single object selection |
NXOpen.SelectLine | Represents a single object selection |
NXOpen.SelectModelingViewList | Represents a list of objects on a selection list |
NXOpen.SelectNXObject | Represents a single object selection |
NXOpen.SelectNXObjectList | Represents a list of objects on a selection list |
NXOpen.SelectObject | Represents a single object selection |
NXOpen.SelectObjectList | Represents a list of objects on a selection list |
NXOpen.Fields.PathObjects | Contains objects that define a lattice path |
NXOpen.SelectPart | Represents a single object selection |
NXOpen.SelectPartList | Represents a list of objects on a selection list |
NXOpen.SelectPoint | Represents a single object selection |
NXOpen.SelectPointList | Represents a list of objects on a selection list |
NXOpen.SelectSketch | Represents a single object selection |
NXOpen.SelectSmartObject | Represents a single object selection |
NXOpen.SelectSpline | Represents a single object selection |
NXOpen.SelectSplineList | Represents a list of objects on a selection list |
NXOpen.SelectTaggedObject | Represents a single object selection |
NXOpen.SelectTaggedObjectList | Represents a list of objects on a selection list |
NXOpen.SelectView | Represents a single object selection |
NXOpen.SelectViewList | Represents a list of objects on a selection list |
NXOpen.SIM.KinematicChannelBuilder | This class is used for add kinematic channel to the channel configuratation list |
NXOpen.SketchExpressionModifierBuilder | Represents a Sketch Expression Modifier Builder |
NXOpen.TextColorFontWidthBuilder | Represent a NXOpen.TextColorFontWidthBuilder |
NXOpen.Tooling.DefineNeutralFactorBuilder | Represeents a NXOpen.Tooling.DefineNeutralFactorBuilder to define neutral factor according to material and formula in the spreadsheet table |
NXOpen.Validate.ValidatorOptions | Contains information about run options of check-mate checking process |
NXOpen.Weld.ConnectionFinderBuilder | Represents a builder to display, manage, delete, and allow the user to reparent face information for the weld objects |
NXOpen.Weld.DatumIconBuilder | Represents a NXOpen.Weld.DatumIconBuilder class used to control the part navigator icon for Datum Pin and Surface Locators |
NXOpen.Weld.JointItemBuilder | Used to create or edit a Weld.WeldJoint feature |
NXOpen.Weld.JointmarkFaceSetsBuilder | Used to create or edit a set of faces for Jointmark |
NXOpen.Weld.JointmarkGuideBuilder | Used to create or edit a guide curve for Jointmark |
NXOpen.Weld.JointmarkPointsBuilder | Used to create or edit a point in the list of points for Jointmark |
NXOpen.Weld.PointMarkPointBuilder | Used to create or edit a point in the list of points for Jointmark |
NXOpen.Weld.SelectDatumPin | Represents a single object selection |
NXOpen.Weld.SelectDatumSurface | Represents a single object selection |
NXOpen.Weld.WeldBeadPathBuilder | Represents the path the bead shape will be swept along |
NXOpen.Weld.WeldBeadSizeBuilder | This builder is used to define the bead shape |
NXOpen.Weld.WeldObjectBuilder | Represents a NXOpen.Weld.WeldObjectBuilder class used to collect welding objects created or edited from a command |
NXOpen.Weld.WeldPointExitBuilder | Represents a NXOpen.Weld.WeldPointExitBuilder class used to pass welding object from the Weld Point command to a user callback |
NXOpen.CAE.Xyplot.ICurveDisplaySettings | Represents the interface for curve display style classes |
NXOpen.CAE.Xyplot.CurveDisplaySettings | Represents the curve display style |
NXOpen.Preferences.IDetailViewPreferences | Represents set of Detail ViewPreferences applicable to drafting views |
NXOpen.Preferences.DetailViewPreferences | Represents set of Detail View Preferences applicable to drafting views |
NXOpen.CAE.Xyplot.IDisplayableModel | This class represents an interface to the XYPLOT displayable model |
NXOpen.CAE.Xyplot.BaseModel | Represents an abstract component object on a XY graphing |
NXOpen.CAE.Xyplot.BasicModel | Represents a abstract component object on a XY graphing |
NXOpen.CAE.Xyplot.AxisModel | Represents an axis model object on a XY graphing |
NXOpen.CAE.Xyplot.MarkerModel | Represents a marker object on a plotting graph |
NXOpen.CAE.Xyplot.NoteModel | Represents a note object on a plot |
NXOpen.CAE.Xyplot.Graph | Manages the display graph |
NXOpen.CAE.Xyplot.ColorMapGraph | Manages the display color map graph |
NXOpen.CAE.Xyplot.Graph3D | Manages the display graph 3d |
NXOpen.CAE.Xyplot.LegendTable | Manages the legend table |
NXOpen.CAE.Xyplot.Plot | Manages the plot template |
NXOpen.CAE.Xyplot.BarChartPlot | Manages the display of bar chart plot |
NXOpen.CAE.Xyplot.ColorBarPlot | Manages the display of color bar plot |
NXOpen.CAE.Xyplot.ColorMapPlot | Manages the display of color map plot |
NXOpen.CAE.Xyplot.Plot2D | Manages the display of 2D plot |
NXOpen.CAE.Xyplot.Plot3D | Manages the display of 3D plot |
NXOpen.CAE.Xyplot.StackedPlot | Manages the display of stacked plot |
NXOpen.CAE.Xyplot.IDisplayStyle | Represents the interface for plot display style classes |
NXOpen.CAE.Xyplot.BaseDisplayStyleSetting | Represent an abstract object on display style |
NXOpen.CAE.Xyplot.AngleAxisStyleSetting | Represents the angle axis display style |
NXOpen.CAE.Xyplot.ArgumentAxisStyleSetting | Represents the argument axis display style |
NXOpen.CAE.Xyplot.AxisStyleSetting | Represents the axis display style |
NXOpen.CAE.Xyplot.AxisYStyleSetting | Represents the axis y display style |
NXOpen.CAE.Xyplot.ColorAxisStyleSetting | Represents the axis display style |
NXOpen.CAE.Xyplot.BaseGridLayoutStyleSetting | Represents the base grid layout display style |
NXOpen.CAE.Xyplot.GridLayoutStyle2DSetting | Represents the 2d grid layout display style |
NXOpen.CAE.Xyplot.GridLayoutStyle3DSetting | Represents the 3d grid layout display style |
NXOpen.CAE.Xyplot.GridStyle2DColorContour | Manages the grid styles for colorbar and colormap plot |
NXOpen.CAE.Xyplot.BaseSymbolStyleSetting | Represents the base symbol display style |
NXOpen.CAE.Xyplot.BarChartStyleSetting | Represents the bar chart display style |
NXOpen.CAE.Xyplot.BaseBarStyleSetting | Represents the base bar display style |
NXOpen.CAE.Xyplot.BarStyle2DSetting | Represents the 2d bar display style |
NXOpen.CAE.Xyplot.BarStyle3DSetting | Represents the 3d bar display style |
NXOpen.CAE.Xyplot.BaseLineStyleSetting | Represents the base line display style |
NXOpen.CAE.Xyplot.LineStyle2DSetting | Represents the 2d line display style |
NXOpen.CAE.Xyplot.LineStyle3DSetting | Represents the 3d line display style |
NXOpen.CAE.Xyplot.VectorStyle2DSetting | Represents the 2D vector display style |
NXOpen.CAE.Xyplot.BasePlateStyleSetting | Represents the base plate display style |
NXOpen.CAE.Xyplot.PlateStyle2DSetting | Represents the 2d plate display style |
NXOpen.CAE.Xyplot.PlateStyle3DSetting | Represents the 3d plate display style |
NXOpen.CAE.Xyplot.ScatterStyleSetting | Represents the scatter display style |
NXOpen.CAE.Xyplot.SurfaceStyleSetting | Represents the surface display style |
NXOpen.CAE.Xyplot.ColorScaleStyle | Represents the color scale display style |
NXOpen.CAE.Xyplot.CurveDisplaySettings | Represents the curve display style |
NXOpen.CAE.Xyplot.DiagramDisplayStyles | Manages the diagram display styles |
NXOpen.CAE.Xyplot.DiagramDisplayStyles2D | Manages the display styles for 2D diagram |
NXOpen.CAE.Xyplot.DiagramDisplayStyles2DBarChart | Manages the 2D bar chart diagram display styles |
NXOpen.CAE.Xyplot.GeneralDisplayStyles | Manages the general display styles |
NXOpen.CAE.Xyplot.GeneralDisplayStyles2D | Manages the general display styles for 2D plot |
NXOpen.CAE.Xyplot.GeneralDisplayStyles2DBarChart | Manages the general display styles for 2D bar chart plot |
NXOpen.CAE.Xyplot.GeneralDisplayStyles2DColorContour | Manages the general display styles for 2D color contour plot |
NXOpen.CAE.Xyplot.GeneralDisplayStyles3D | Manages the general display styles for 3D plot |
NXOpen.CAE.Xyplot.GraphOptionsStyle2D | Manages the specific settings for 2D graph |
NXOpen.CAE.Xyplot.LegendTableGroupStyle | Manages the legend table group styles |
NXOpen.CAE.Xyplot.LegendTableStyle | Manages the legend table styles |
NXOpen.CAE.Xyplot.PlotGraphTemplate | Manages the plot graph template |
NXOpen.CAE.Xyplot.ProbingStyle | Manages the probing display styles |
NXOpen.CAE.Xyplot.TextBoxStyleSetting | Represents the text box display style |
NXOpen.CAE.Xyplot.TextStyleSetting | Represents the text display style |
NXOpen.CAE.Xyplot.AxisItemStyle | Represents the axis item display style |
NXOpen.CAE.Xyplot.CustomTextStyleSetting | Represents the text content definition in title options |
NXOpen.CAE.Xyplot.AxisLabelStyle | Represents the axis label display style |
NXOpen.CAE.Xyplot.GraphNameStyle | Represents the graph name display style |
NXOpen.CAE.Xyplot.LegendTableTextStyle | Manages the legend table text styles |
NXOpen.CAE.Xyplot.MarkerStyleSetting | Represents the marker display style |
NXOpen.CAE.Xyplot.NoteStyleSetting | Represents the note display style |
NXOpen.CAE.Xyplot.UnknownResultScaleStyle | Represents the axis display style |
NXOpen.CAE.FEModel.IdSpecificationObject | Structure to specify the Node, Element, and Physical property table start ids and offsets for use in CAE.FEModel.AppendFemodel |
NXOpen.UF.UFDrf.IdSymbolInfo | Wrapper for UF_DRF_id_symbol_info_s |
NXOpen.AME.IEngObject | Represents Engineering Object |
NXOpen.AME.AMEEngObject | Represents Engineering Object |
NXOpen.AME.PageObject | Represents a Page Object |
NXOpen.AME.FragmentObject | Represents a Fragment Object |
NXOpen.AME.AMEPlcHwItem | Represents Plc Hw Item |
NXOpen.AME.CabinetObject | Cabinet Object class |
IEnumerable | |
NXOpen.DMU.SnapshotCollection | Represents the collection object for all snapshot in a part |
NXOpen.CAE.IExportableFEEntity | Represents an EXPORTABLE_FE_ENTITY |
NXOpen.CAE.CaeGroup | Represents a group class NXOpen.CAE.CaeGroup |
NXOpen.CAE.CaeRegion | Represents a cae region object |
NXOpen.CAE.Connections.Element | This is the class to access a connection element |
NXOpen.CAE.FEElement | Represents a Finite Element |
NXOpen.CAE.FENode | Represents a Finite Element Node |
NXOpen.CAE.Mesh | Represents a Mesh |
NXOpen.CAE.HybridMesh | Represents swept Mesh |
NXOpen.CAE.Mesh0d | Represents 0d Mesh |
NXOpen.CAE.Mesh1d | Represents 1d Mesh |
NXOpen.CAE.Mesh2d | Represents 2d Mesh |
NXOpen.CAE.DependentMesh | Represents Mesh Recipe |
NXOpen.CAE.MappedMesh | Represents Mesh Recipe |
NXOpen.CAE.Mesh2dFree | Represents 2d Mesh |
NXOpen.CAE.Mesh3d | Represents 3d Mesh |
NXOpen.CAE.MeshFollower | Represents Mesh Recipe |
NXOpen.CAE.MeshShellFromSolid | Represents 2d Mesh that follows 3d mesh |
NXOpen.CAE.PrimitiveMesh | Represents Primitive Mesh |
NXOpen.CAE.PrimitiveRecipeMesh | Represents a primitive recipe mesh |
NXOpen.CAE.RecipeConvexMesh | Represents a convex mesh |
NXOpen.CAE.RecipeOpenDuctMesh | Represents a open duct mesh |
NXOpen.CAE.RecipeSurfaceWrap | Represents 2d mesh associated to fluid domain body, all from surface wrapper |
NXOpen.CAE.ShipMeshAutomation | Represents Ship Mesh Automation |
NXOpen.CAE.SweptMesh | Represents swept Mesh |
NXOpen.CAE.ModelingObjectPropertyTable | Represents a Modeling Object Property Table |
NXOpen.CAE.PhysicalPropertyTable | Represents a Physical Property Table |
NXOpen.CAE.Laminate | Represents a Laminate, which is a specialized kind of NXOpen.CAE.PhysicalPropertyTable |
NXOpen.CAE.SimBC | Represents BC class which is a superclass to NXOpen.CAE.SimLoad and NXOpen.CAE.SimConstraint |
NXOpen.CAE.SimConstraint | Represents a constraint |
NXOpen.CAE.SimLoad | Represents a load |
NXOpen.CAE.SimSimulationObject | Represents a simulation object |
NXOpen.CAE.SimLoadSet | Represents a cae load set object |
NXOpen.CoordinateSystem | Represents a coordinate system |
NXOpen.CartesianCoordinateSystem | Represents a cartesian coordinate system |
NXOpen.CylindricalCoordinateSystem | Represents a cylindrical coordinate system |
NXOpen.SphericalCoordinateSystem | Represents a spherical coordinate system |
NXOpen.PhysicalMaterial | Represents Physical Material |
NXOpen.Preferences.IGeneralViewPreferences | Represents set of General View Styles applicable to drafting views |
NXOpen.Drawings.GeneralViewStyle | Represents set of General View Styles Preferences applicable to drafting views |
NXOpen.Preferences.GeneralViewPreferences | Represents set of General View Preferencess applicable to drafting views |
NXOpen.Motion.IGraphSource | Represents an interface IGraphSource |
NXOpen.Motion.AnalyticalContact | Represents an Analytical Contact motion object |
NXOpen.Motion.BeamForce | Represents a BeamForce |
NXOpen.Motion.BodyContact | Represents a NXOpen.Motion.BodyContact |
NXOpen.Motion.Bushing | Represents a bushing |
NXOpen.Motion.ControlOutput | Represents a Control Output motion object |
NXOpen.Motion.ControlPort | Represents a motion control port object class |
NXOpen.Motion.CurveContact | Represents a NXOpen.Motion.CurveContact |
NXOpen.Motion.CurveOnCurve | Represents a curve on curve |
NXOpen.Motion.Damper | Represents a damper |
NXOpen.Motion.FlexBody | Represents the Motion FlexBody class |
NXOpen.Motion.GeneralCoupler | Represents motion 2-3 joint coupler |
NXOpen.Motion.Joint | Represents a motion joint object |
NXOpen.Motion.Link | Represents the Motion Link class |
NXOpen.Motion.LinkCoupler | Represents a NXOpen.Motion.LinkCoupler |
NXOpen.Motion.LinkDriver | Represents a Link Driver |
NXOpen.Motion.Marker | Represents the Motion Marker class |
NXOpen.Motion.MotionFunction | Represents a Motion Function Object |
NXOpen.Motion.MotionSensor | Represents a motion sensor |
NXOpen.Motion.PackagingMeasure | This class represents a Packaging Measure object |
NXOpen.Motion.PlantInput | Represents a Plant Input motion object |
NXOpen.Motion.PlantOutput | Represents a Plant Output motion object |
NXOpen.Motion.PointOnCurve | Represents a point on curve |
NXOpen.Motion.PointOnSurface | Represents a point on surface motion object |
NXOpen.Motion.ScalarForce | Represents the Motion ScalarForce class |
NXOpen.Motion.ScalarTorque | Represents the Motion ScalarTorque class |
NXOpen.Motion.SplineBeam | Represents a SplineBeam |
NXOpen.Motion.Spring | Represents a spring |
NXOpen.Motion.Tire | |
NXOpen.Motion.VectorForce | Represents a vector force |
NXOpen.Motion.VectorTorque | Represents a vector torque |
IHasHandle | |
NXOpen.NXColor | Represents a standard NX color |
NXOpen.Preferences.IHiddenLinesViewPreferences | Represents set of HiddenLinesViewStyle applicable to drafting views |
NXOpen.Drawings.HiddenLinesViewStyle | Represents set of Hidden Lines View Style Preferences applicable to drafting views |
NXOpen.Preferences.HiddenLinesViewPreferences | Represents set of Hidden Lines View Preferences applicable to drafting views |
NXOpen.UF.UFDrf.ImageData | Wrapper for UF_DRF_image_data_s |
NXOpen.CAE.SimPart.ImportErrorCodes | Contains list of error codes for import of each entity type |
NXOpen.UF.UFCgm.ImportOptions | Wrapper for UF_CGM_import_options_s |
NXOpen.CAE.SimPart.ImportOptions | Contains information about which entities to be imported |
NXOpen.UF.ImportPartModes | Wrapper for UF_import_part_modes_s |
NXOpen.UF.UFModl.ImprintFacesData | Wrapper for UF_MODL_imprint_faces_data_s |
NXOpen.UF.UFModl.ImprintLoopData | Wrapper for UF_MODL_imprint_loop_data_s |
NXOpen.BasePart.IncompleteStatus | Incomplete part return data |
NXOpen.UF.UFParam.IndexAttribute | Wrapper for UF_PARAM_index_attribute_s |
NXOpen.UF.UFAttr.Info | Wrapper for UF_ATTR_info_s |
NXOpen.UF.UFSket.Info | Wrapper for UF_SKET_info_s |
NXOpen.Tooling.AddReusableFeatureCollection.InputData | Defines the input data of AddReusableFeatureBuilder |
NXOpen.UF.UFDisp.Inquire | Wrapper for UF_DISP_inquire_s |
NXOpen.UF.UFModl.InsetFlangeData | Wrapper for UF_MODL_inset_flange_data_s |
NXOpen.Mechatronics.DynamicObjectTableBuilder.Instance | Represents Instance definition structure |
NXOpen.UF.UFAssem.InstanceIntent | Wrapper for UF_ASSEM_instance_intent_s |
NXOpen.UF.UFAssem.InstanceStatus | Wrapper for UF_ASSEM_instance_status_s |
NXOpen.UF.UFFam.IntentData | Wrapper for UF_FAM_intent_data_s |
NXOpen.UF.UFClear.InterfData | Wrapper for UF_CLEAR_interf_data_s |
NXOpen.UF.UFMotion.InterferenceStruct | Wrapper for UF_MOTION_interference_s |
NXOpen.UF.UFDrf.IntermediatePoints | Wrapper for UF_DRF_intermediate_points_s |
NXOpen.UF.UFCurve.IntersectInfo | Wrapper for UF_CURVE_intersect_info_s |
NXOpen.CAM.IntStatusData | The data for CamUI_IntStatusComp |
NXOpen.INXObject | Represents an interface from which most NXOpen classes inherit |
NXOpen.Annotations.IAngularTolerance | Represents an object that has angular tolerance |
NXOpen.Annotations.BaseAngularDimension | Represents an angular dimension |
NXOpen.Annotations.AngularDimension | Represents an angular dimension |
NXOpen.Annotations.MajorAngularDimension | Represents a major angular dimension |
NXOpen.Annotations.GeneralMajorAngularDimension | Represents a major angular dimension |
NXOpen.Annotations.MinorAngularDimension | Represents a minor angular dimension |
NXOpen.Annotations.GeneralMinorAngularDimension | Represents a minor angular dimension |
NXOpen.Annotations.PmiAngularDimension | Represents a PMI angular dimension |
NXOpen.Annotations.PmiMajorAngularDimension | Represents a PMI major angular dimension |
NXOpen.Annotations.PmiMinorAngularDimension | Represents a PMI minor angular dimension |
NXOpen.Annotations.IAppendedText | Represents an object that has appended text |
NXOpen.Annotations.Dimension | Represents a dimension |
NXOpen.Annotations.BaseAngularDimension | Represents an angular dimension |
NXOpen.Annotations.BaseArcLengthDimension | Represents a arc length dimension |
NXOpen.Annotations.ArcLengthDimension | Represents an arc length dimension |
NXOpen.Annotations.GeneralArcLengthDimension | Represents a arc length dimension |
NXOpen.Annotations.PmiArcLengthDimension | Represents a PMI arc length dimension |
NXOpen.Annotations.BaseChamferDimension | Represents a chamfer dimension |
NXOpen.Annotations.ChamferDimension | Represents a chamfer dimension |
NXOpen.Annotations.GeneralChamferDimension | Represents a chamfer dimension |
NXOpen.Annotations.PmiChamferDimension | Represents a PMI chamfer dimension |
NXOpen.Annotations.BaseConcentricCircleDimension | Represents a concentric circle dimension |
NXOpen.Annotations.ConcentricCircleDimension | Represents a concentric circle dimension |
NXOpen.Annotations.GeneralConcentricCircleDimension | Represents a concentric circle dimension |
NXOpen.Annotations.PmiConcentricCircleDimension | Represents a PMI concentric circle dimension |
NXOpen.Annotations.BaseCylindricalDimension | Represents a cylindrical dimension |
NXOpen.Annotations.CylindricalDimension | Represents a cylindrical dimension |
NXOpen.Annotations.GeneralCylindricalDimension | Represents a horizontal dimension |
NXOpen.Annotations.PmiCylindricalDimension | Represents a PMI cylindrical dimension |
NXOpen.Annotations.BaseDiameterDimension | Represents a diameter dimension |
NXOpen.Annotations.DiameterDimension | Represents a diameter dimension |
NXOpen.Annotations.GeneralDiameterDimension | Represents a horizontal dimension |
NXOpen.Annotations.PmiDiameterDimension | Represents a PMI diameter dimension |
NXOpen.Annotations.BaseFoldedRadiusDimension | Represents a folded radius dimension |
NXOpen.Annotations.FoldedRadiusDimension | Represents a folded radius dimension |
NXOpen.Annotations.PmiFoldedRadiusDimension | Represents a PMI folded radius dimension |
NXOpen.Annotations.BaseHoleDimension | Represents a hole dimension |
NXOpen.Annotations.GeneralHoleDimension | Represents a hole dimension |
NXOpen.Annotations.HoleDimension | Represents a hole dimension |
NXOpen.Annotations.PmiHoleDimension | Represents a PMI hole dimension |
NXOpen.Annotations.BaseHorizontalDimension | Represents a horizontal dimension |
NXOpen.Annotations.GeneralHorizontalDimension | Represents a horizontal dimension |
NXOpen.Annotations.HorizontalDimension | Represents a horizontal dimension |
NXOpen.Annotations.PmiHorizontalDimension | Represents a PMI horizontal dimension |
NXOpen.Annotations.BaseParallelDimension | Represents a parallel dimension |
NXOpen.Annotations.GeneralParallelDimension | Represents a parallel dimension |
NXOpen.Annotations.ParallelDimension | Represents a parallel dimension |
NXOpen.Annotations.PmiParallelDimension | Represents a PMI parallel dimension |
NXOpen.Annotations.BasePerpendicularDimension | Represents a perpendicular dimension |
NXOpen.Annotations.GeneralPerpendicularDimension | Represents a horizontal dimension |
NXOpen.Annotations.PerpendicularDimension | Represents a perpendicular dimension |
NXOpen.Annotations.PmiPerpendicularDimension | Represents a PMI perpendicular dimension |
NXOpen.Annotations.BaseRadiusDimension | Represents a radius dimension |
NXOpen.Annotations.GeneralFoldedRadiusDimension | Represents a folded radius dimension |
NXOpen.Annotations.GeneralRadiusDimension | Represents a radius dimension |
NXOpen.Annotations.PmiRadiusDimension | Represents a PMI radius dimension |
NXOpen.Annotations.RadiusDimension | Represents a radius dimension |
NXOpen.Annotations.BaseVerticalDimension | Represents a horizontal dimension |
NXOpen.Annotations.GeneralVerticalDimension | Represents a horizontal dimension |
NXOpen.Annotations.PmiVerticalDimension | Represents a PMI vertical dimension |
NXOpen.Annotations.VerticalDimension | Represents a vertical dimension |
NXOpen.Annotations.OrdinateDimension | Represents an ordinate dimension |
NXOpen.Annotations.HorizontalOrdinateDimension | Represents a horizontal ordinate dimension |
NXOpen.Annotations.PmiHorizontalOrdinateDimension | Represents a PMI horizontal ordinate dimension |
NXOpen.Annotations.VerticalOrdinateDimension | Represents a vertical ordinate dimension |
NXOpen.Annotations.PmiVerticalOrdinateDimension | Represents a PMI vertical ordinate dimension |
NXOpen.Annotations.OrdinateOriginDimension | Represents an ordinate origin dimension |
NXOpen.Annotations.PmiOrdinateOriginDimension | Represents a PMI ordinate origin dimension |
NXOpen.Annotations.Fcf | Represents an FCF |
NXOpen.Annotations.IArbitraryTarget | Represents interface class for arbitrary datum target areas |
NXOpen.Annotations.ArbitraryTarget | Represents an arbitrary datum target |
NXOpen.Annotations.DraftingArbitraryTarget | Represents a drafting arbitrary datum target |
NXOpen.Annotations.ICircularTarget | Represents interface class for a circular datum target |
NXOpen.Annotations.CircularTarget | Represents a circular datum target |
NXOpen.Annotations.IContainer | Represents an object that contains other objects |
NXOpen.Annotations.DimensionSet | Represents a dimension set |
NXOpen.Annotations.BaselineDimension | Represents a baseline dimension |
NXOpen.Annotations.PmiBaselineDimension | Represents a PMI baseline dimension |
NXOpen.Annotations.ChainDimension | Represents a chain dimension |
NXOpen.Annotations.PmiChainDimension | Represents a PMI chain dimension |
NXOpen.Annotations.IDatum | Represents interface class for a datum |
NXOpen.Annotations.BaseDatum | Represents a datum |
NXOpen.Annotations.DraftingDatum | Represents a datum |
NXOpen.Annotations.Datum | Represents a datum |
NXOpen.Annotations.IDatumTarget | Represents interface class for a datum target |
NXOpen.Annotations.BaseDatumTarget | Represents a datum target |
NXOpen.Annotations.DraftingDatumTarget | Represents a datum target |
NXOpen.Annotations.DatumTarget | Represents a datum target |
NXOpen.Annotations.ArbitraryTarget | Represents an arbitrary datum target |
NXOpen.Annotations.AreaTarget | Represents an area target |
NXOpen.Annotations.CircularTarget | Represents a circular datum target |
NXOpen.Annotations.RectangularTarget | Represents a rectangular datum target |
NXOpen.Annotations.LineTarget | Represents a line datum target |
NXOpen.Annotations.PointTarget | Represents point datum target |
NXOpen.Annotations.DraftingArbitraryTarget | Represents a drafting arbitrary datum target |
NXOpen.Annotations.DraftingLineTarget | Represents a drafting line datum target |
NXOpen.Annotations.DraftingPointTarget | Represents drafting point datum target |
NXOpen.Annotations.IFcf | Represents interface class for a feature control frame |
NXOpen.Annotations.Gdt | Represents a Geometric Dimensioning and Tolerancing symbol |
NXOpen.Annotations.BaseDatum | Represents a datum |
NXOpen.Annotations.BaseDatumTarget | Represents a datum target |
NXOpen.Annotations.BaseFcf | Represents a datum |
NXOpen.Annotations.DraftingFcf | Represents an FCF |
NXOpen.Annotations.Fcf | Represents an FCF |
NXOpen.Annotations.ILinearTolerance | Represents an object that has linear tolerance |
NXOpen.Annotations.BaseArcLengthDimension | Represents a arc length dimension |
NXOpen.Annotations.BaseChamferDimension | Represents a chamfer dimension |
NXOpen.Annotations.BaseConcentricCircleDimension | Represents a concentric circle dimension |
NXOpen.Annotations.BaseCylindricalDimension | Represents a cylindrical dimension |
NXOpen.Annotations.BaseDiameterDimension | Represents a diameter dimension |
NXOpen.Annotations.BaseFoldedRadiusDimension | Represents a folded radius dimension |
NXOpen.Annotations.BaseHoleDimension | Represents a hole dimension |
NXOpen.Annotations.BaseHorizontalDimension | Represents a horizontal dimension |
NXOpen.Annotations.BaseParallelDimension | Represents a parallel dimension |
NXOpen.Annotations.BasePerpendicularDimension | Represents a perpendicular dimension |
NXOpen.Annotations.BaseRadiusDimension | Represents a radius dimension |
NXOpen.Annotations.BaseSurfaceFinish | Represents a Base Surface Finish |
NXOpen.Annotations.DraftingSurfaceFinish | Represents a Drafting Surface Finish |
NXOpen.Annotations.SurfaceFinish | Represents a PMI Surface Finish |
NXOpen.Annotations.BaseVerticalDimension | Represents a horizontal dimension |
NXOpen.Annotations.OrdinateDimension | Represents an ordinate dimension |
NXOpen.Annotations.ILineTarget | Represents interface class for line datum target |
NXOpen.Annotations.DraftingLineTarget | Represents a drafting line datum target |
NXOpen.Annotations.LineTarget | Represents a line datum target |
NXOpen.Annotations.IPmi | Represents an object that has PMI(Product and Manufacturing Information) data |
NXOpen.Annotations.BaseArcLengthDimension | Represents a arc length dimension |
NXOpen.Annotations.BaseChamferDimension | Represents a chamfer dimension |
NXOpen.Annotations.BaseConcentricCircleDimension | Represents a concentric circle dimension |
NXOpen.Annotations.BaseCustomSymbol | Represents a base custom symbol |
NXOpen.Annotations.CustomSymbol | Represents a custom symbol |
NXOpen.Annotations.GeneralCustomSymbol | Represents a general custom symbol |
NXOpen.Annotations.PmiCustomSymbol | Represents a PMI custom symbol |
NXOpen.Annotations.BaseCylindricalDimension | Represents a cylindrical dimension |
NXOpen.Annotations.BaseDiameterDimension | Represents a diameter dimension |
NXOpen.Annotations.BaseFoldedRadiusDimension | Represents a folded radius dimension |
NXOpen.Annotations.BaseHoleDimension | Represents a hole dimension |
NXOpen.Annotations.BaseHorizontalDimension | Represents a horizontal dimension |
NXOpen.Annotations.BaseNote | Represents a Note |
NXOpen.Annotations.GenericNote | Represents a Generic Note |
NXOpen.Annotations.Note | Represents a Note |
NXOpen.Drawings.ViewingDirectionArrowLabel | This class represents a Drafting Viewing Direction Arrow Label |
NXOpen.Annotations.PmiNote | Represents a PMI note |
NXOpen.Annotations.BaseParallelDimension | Represents a parallel dimension |
NXOpen.Annotations.BasePerpendicularDimension | Represents a perpendicular dimension |
NXOpen.Annotations.BaseRadiusDimension | Represents a radius dimension |
NXOpen.Annotations.BaseVerticalDimension | Represents a horizontal dimension |
NXOpen.Annotations.CuttingPlaneSymbol | Represents a Cutting Plane Symbol |
NXOpen.Annotations.Datum | Represents a datum |
NXOpen.Annotations.DatumTarget | Represents a datum target |
NXOpen.Annotations.Fcf | Represents an FCF |
NXOpen.Annotations.MajorAngularDimension | Represents a major angular dimension |
NXOpen.Annotations.MinorAngularDimension | Represents a minor angular dimension |
NXOpen.Annotations.Pmi | Represents a PMI(Product and Manufacturing Information) object |
NXOpen.Annotations.PmiBoltCircleCenterline | Represents a PMI Bolt Circle Centerline class |
NXOpen.Annotations.PmiCenterline3d | Represents a Pmi 3D centerline |
NXOpen.Annotations.PmiCenterMark | Represents a PMI Center Mark class |
NXOpen.Annotations.PmiHorizontalOrdinateDimension | Represents a PMI horizontal ordinate dimension |
NXOpen.Annotations.PmiLabel | Represents a PMI label |
NXOpen.Annotations.PmiLineWeld | Represents a PMI line weld |
NXOpen.Annotations.PmiMajorAngularDimension | Represents a PMI major angular dimension |
NXOpen.Annotations.PmiMinorAngularDimension | Represents a PMI minor angular dimension |
NXOpen.Annotations.PmiOrdinateOriginDimension | Represents a PMI ordinate origin dimension |
NXOpen.Annotations.PmiVerticalOrdinateDimension | Represents a PMI vertical ordinate dimension |
NXOpen.Annotations.PmiWave | Represents a Wave |
NXOpen.Annotations.Region | Represents a Region |
NXOpen.Annotations.IPointTarget | Represents interface class for a point datum target |
NXOpen.Annotations.DraftingPointTarget | Represents drafting point datum target |
NXOpen.Annotations.PointTarget | Represents point datum target |
NXOpen.Annotations.IRectangularTarget | Represents interface class for a rectangular datum target |
NXOpen.Annotations.RectangularTarget | Represents a rectangular datum target |
NXOpen.Annotations.ISlotDimension | Represents a slot dimension |
NXOpen.Annotations.BaseHorizontalDimension | Represents a horizontal dimension |
NXOpen.Annotations.BaseParallelDimension | Represents a parallel dimension |
NXOpen.Annotations.BaseVerticalDimension | Represents a horizontal dimension |
NXOpen.CAE.Connections.ICsys | This class represents an Interface to the Connection Csys |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.Damper | Damper connection |
NXOpen.CAE.Connections.Kinematic | Kinematic connection |
NXOpen.CAE.Connections.Rigid | Rigid connection |
NXOpen.CAE.Connections.Sealing | Sealing connection |
NXOpen.CAE.Connections.Spring | Spring connection |
NXOpen.CAE.Connections.IDiameter | This class represents an Interface to the Diameter parameters |
NXOpen.CAE.Connections.Bolt | Bolt connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.IDof | This class represents an interface to the connection's degrees of freedom |
NXOpen.CAE.Connections.Kinematic | Kinematic connection |
NXOpen.CAE.Connections.Rigid | Rigid connection |
NXOpen.CAE.Connections.IDofCombination | This class represents an interface to the connection's degrees of freedom combination |
NXOpen.CAE.Connections.Kinematic | Kinematic connection |
NXOpen.CAE.Connections.IFlangesContainer | This interface offers access to the flanges of a connection (SpotWeld for example) |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.Bolt | Bolt connection |
NXOpen.CAE.Connections.Sealing | Sealing connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.IHeight | This class represents an Interface to the Height parameters |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.ILineDiscretization | This class represents an Interface to the Diameter parameters |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.Sealing | Sealing connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.ILineOffset | This class represents an Interface to the Diameter parameters |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.Sealing | Sealing connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.ILocationsContainer | This class represents an Interface to the Locations parameters |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.Bolt | Bolt connection |
NXOpen.CAE.Connections.Sealing | Sealing connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.ILocationsMultiPointContainer | This class represents an Interface to the Multi Point Locations container |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.ILocationsSinglePointContainer | This class represents an Interface to the Locations parameters |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.ILocationsWithDirContainer | This class represents an Interface to the Locations parameters |
NXOpen.CAE.Connections.Bolt | Bolt connection |
NXOpen.CAE.Connections.ILocationsWithDiscretizationContainer | This class represents an Interface to the Locations With Discretization container |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.Sealing | Sealing connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.IMaterial | This class represents an Interface to the Material entity |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.Bolt | Bolt connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.INodalTargetCenter | This class represents an Interface to the Connection Target |
NXOpen.CAE.Connections.NodalTargetSinglePoint | Group of Points Target |
NXOpen.CAE.Connections.NodalTargetSpider | Group of Points Target |
NXOpen.CAE.Connections.INodalTargetLegs | This class represents an Interface to the Connection Target |
NXOpen.CAE.Connections.NodalTargetSetOfPoints | Set of Points Target |
NXOpen.CAE.Connections.NodalTargetSpider | Group of Points Target |
NXOpen.CAE.Connections.INodalTargetsContainer | This class represents an Interface to the Connection Target Container |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.Damper | Damper connection |
NXOpen.CAE.Connections.Kinematic | Kinematic connection |
NXOpen.CAE.Connections.Rigid | Rigid connection |
NXOpen.CAE.Connections.Spring | Spring connection |
NXOpen.CAE.Connections.INodalTargetsPairing | This class represents an Interface to the nodal connections pairing algorithm parameters |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.Damper | Damper connection |
NXOpen.CAE.Connections.Kinematic | Kinematic connection |
NXOpen.CAE.Connections.Rigid | Rigid connection |
NXOpen.CAE.Connections.Spring | Spring connection |
NXOpen.CAE.Connections.IStiffness | This class represents an Interface to the Stiffness constants |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.Sealing | Sealing connection |
NXOpen.CAE.Connections.Spring | Spring connection |
NXOpen.CAE.Connections.IStiffnessDynamic | This class represents an Interface to the Stiffness dynamic |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.IStructuralDamping | This class represents an Interface to the StructuralDamping constants |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.IStructuralDampingDynamic | This class represents an Interface to the StructuralDamping dynamic |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.ITolerance | This class represents an Interface to the Tolerance parameters |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.Sealing | Sealing connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.IViscousDamping | This class represents an Interface to the ViscousDamping constants |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.Damper | Damper connection |
NXOpen.CAE.Connections.IViscousDampingDynamic | This class represents an Interface to the ViscousDamping dynamic |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.IWidth | This class represents an Interface to the Width parameters |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.IFolder | This class represents an Interface to the Folder |
NXOpen.CAE.SimLbcFolder | Represents a folder object in the .sim files |
NXOpen.CAE.IHierarchicalFEModel | This class represents an Interface to the Finite Element Model |
NXOpen.CAE.AssyFEModel | This class represents an Assembly Finite Element Model |
NXOpen.CAE.FEModelOccurrence | This class represents a Finite Element Model Occurrence |
NXOpen.Display.IDynamicSectionCutCreator | Represents a dynamic section-cut creator that generates dynamic section-cuts (see NXOpen.Display.DynamicSectionCut ) |
NXOpen.Display.DynamicSection | Represents a dynamic section |
NXOpen.Annotations.LightweightSection | Represents a PMI Lightweight Section |
NXOpen.Display.Grid | Represents a grid |
NXOpen.Display.BoundedGrid | Represents a bounded grid |
NXOpen.Display.DatumPlaneGrid | Represents a grid on a datum plane |
NXOpen.Display.PlaneGrid | Represents a grid on a bounded plane |
NXOpen.DMU.ISnapshot | Represents the NXOpen.DMU.ISnapshot object |
NXOpen.DMU.Snapshot | Represents the NXOpen.DMU.Snapshot object |
NXOpen.Features.IContainerFeature | Represents a container feature on a part |
NXOpen.Features.InstanceFeature | Represents a instance feature |
NXOpen.Features.Mirror | Represents a mirror feature |
NXOpen.Features.PatternFeature | Represents a pattern feature |
NXOpen.Features.PatternGeometry | Represents a pattern geometry feature |
NXOpen.Features.IIsolateToolBodyOperation | Represents a combine body feature |
NXOpen.Features.AestheticFaceBlend | Represents an aesthetic face blend feature |
NXOpen.Features.CombineBodyFeature | Represents a boolean feature |
NXOpen.Features.BooleanFeature | Represents a boolean feature |
NXOpen.Features.BridgeTransition | Represents a bridge transition feature |
NXOpen.Features.EmbossBody | Represents an emboss body feature |
NXOpen.Features.PasteFace | Represents a paste face feature |
NXOpen.Features.Patch | Represents a Patch feature |
NXOpen.Features.Sew | Represents a sew feature |
NXOpen.Features.FaceBlend | Represents a Face Blend feature |
NXOpen.Features.SoftBlend | Represents a Soft Blend feature |
NXOpen.Features.StyledBlend | Represents a styled blend feature |
NXOpen.Features.StyledCorner | Represents a styled corner feature |
NXOpen.Features.TrimAndExtend | Represents a trim and extend feature |
NXOpen.Features.TrimExtend | Represents a trim extend feature |
NXOpen.Fields.IApplicationData | Interface for all application specific data to be registered on fields |
NXOpen.CAE.FemSignalProcessingSignalAttributes | Implementation of the NXOpen.Fields.IApplicationData |
NXOpen.GeometricUtilities.DegreesAndSegmentsOrPatchesBuilder | the DegreesAndSegmentsOrPatches builder |
NXOpen.GeometricUtilities.OnPathDimWithValueBuilder | Represents a NXOpen.GeometricUtilities.OnPathDimWithValueBuilder |
NXOpen.GeometricUtilities.RotationSetBuilder | Represents a NXOpen.GeometricUtilities.RotationSetBuilder |
NXOpen.IBaseCurve | Represents something containing a two dimensional curve |
NXOpen.CAE.CAEEdge | Represents a CAE edge geometry |
NXOpen.Facet.FacetedEdge | Represents a faceted edge |
NXOpen.ICurve | Represents something containing a two dimensional modeling curve |
NXOpen.Curve | Represents a curve |
NXOpen.Conic | Represents a conic curve |
NXOpen.Arc | Represents an arc curve |
NXOpen.Routing.ArcSegment | Represents a arc segment |
NXOpen.Routing.GapArcSegment | Represents a gap arc segment |
NXOpen.Ellipse | Represents an ellipse curve |
NXOpen.Hyperbola | Represents a hyperbola curve |
NXOpen.Parabola | Represents a parabola curve |
NXOpen.Line | Represents a line curve |
NXOpen.InfiniteLine | Represents a infinite line curve |
NXOpen.Routing.LineSegment | Represents a line segment |
NXOpen.Spline | Represents a spline curve |
NXOpen.Polyline | Represents a polyline curve |
NXOpen.Routing.SplineSegment | Represents a spline segment |
NXOpen.Drawings.DraftingCurve | Represents a Drafting VD Curve |
NXOpen.Edge | Represents an edge |
NXOpen.IBasePlane | Represents a Plane or Datum Plane |
NXOpen.DatumPlane | Represents a datum plane |
NXOpen.IPlane | Represents an Plane class |
NXOpen.Plane | Represents an Plane class |
NXOpen.IBody | Represents something containing a body |
NXOpen.Body | Represents a Body |
NXOpen.CAE.CAEBody | Represents a CAE body geometry |
NXOpen.IFitTo | Represents something that can be supplied to View.FitToObjects |
NXOpen.CAE.FEElement | Represents a Finite Element |
NXOpen.CAE.FENode | Represents a Finite Element Node |
NXOpen.CAM.FBM.Feature | Interface for CAM Feature objects |
NXOpen.CAM.CAMFeature | Represents a CAM Feature |
NXOpen.CAM.InspectionOperation | Represents an Inspection operation |
NXOpen.DisplayableObject | Base class for all objects that are displayable |
NXOpen.Annotations.Annotation | Represents an annotation / PMI (Product and Manufacturing Information) display instance object |
NXOpen.Annotations.BaseArrow | Represents a BaseArrow |
NXOpen.Drawings.ViewingDirectionArrow | This class represents a Drafting Viewing Direction Arrow |
NXOpen.Annotations.BaseFrameBar | Represents a base frame bar class |
NXOpen.Annotations.FrameBar | Represents a frame bar class |
NXOpen.Annotations.CuttingPlaneSymbol | Represents a Cutting Plane Symbol |
NXOpen.Annotations.Dimension | Represents a dimension |
NXOpen.Annotations.DimensionSet | Represents a dimension set |
NXOpen.Annotations.DraftingAid | Represents a drafting aid |
NXOpen.Annotations.BaseCustomSymbol | Represents a base custom symbol |
NXOpen.Annotations.Centerline | Represents a drafting centerline |
NXOpen.Annotations.BaseCenterline3d | Represents a Base 3D centerline |
NXOpen.Annotations.Centerline3d | Represents a 3D centerline |
NXOpen.Annotations.PmiCenterline3d | Represents a Pmi 3D centerline |
NXOpen.Annotations.BaseCenterMark | Represents a base center mark class |
NXOpen.Annotations.CenterMark | Represents a center mark class |
NXOpen.Annotations.PmiCenterMark | Represents a PMI Center Mark class |
NXOpen.Annotations.Centerline2d | Represents a 2D centerline |
NXOpen.Annotations.CircleCenterline | Represents a CircleCenterline centerline |
NXOpen.Annotations.BaseBoltCircleCenterline | Represents a base bolt centerline class |
NXOpen.Annotations.BoltCircleCenterline | Represents a BoltCircleCenterline centerline |
NXOpen.Annotations.PmiBoltCircleCenterline | Represents a PMI Bolt Circle Centerline class |
NXOpen.Annotations.CircularCenterline | Represents a CircularCenterline centerline |
NXOpen.Annotations.SymmetricalCenterline | Represents a Symmetrical Centerline |
NXOpen.Annotations.IdSymbol | Represents an ID symbol |
NXOpen.Annotations.IntersectionSymbol | Represents a intersection symbol |
NXOpen.Annotations.OffsetCenterPoint | Represents a offset center point |
NXOpen.Annotations.SimpleDraftingAid | Represents a simple drafting aid |
NXOpen.Annotations.Gdt | Represents a Geometric Dimensioning and Tolerancing symbol |
NXOpen.Annotations.NoteBase | Represents a base class for notes and labels |
NXOpen.Annotations.BaseNote | Represents a Note |
NXOpen.Annotations.Label | Represents a label |
NXOpen.Annotations.GeneralLabel | Represents a General Label |
NXOpen.Annotations.PmiLabel | Represents a PMI label |
NXOpen.CAE.CaeLabel | Represents an object that manages annotation for CAE |
NXOpen.CAE.CaeNote | Represents an object that manages annotation for CAE |
NXOpen.Annotations.TargetPoint | Represents a target point |
NXOpen.Annotations.Weld | Represents a weld |
NXOpen.Annotations.LineWeld | Represents a line weld |
NXOpen.Annotations.PmiLineWeld | Represents a PMI line weld |
NXOpen.Annotations.DraftingImage | Represents a drafting image |
NXOpen.Annotations.Hatch | Represents a crosshatch or area fill |
NXOpen.Annotations.PmiAttribute | Represents a Pmi Attribute |
NXOpen.Annotations.BalloonNote | Represents a Balloon Note |
NXOpen.Annotations.BaseSurfaceFinish | Represents a Base Surface Finish |
NXOpen.Annotations.CompanyProprietaryInformation | Represents a Company Proprietary Information |
NXOpen.Annotations.CoordinateNote | Represents a Coordinate Note |
NXOpen.Annotations.EnterpriseIdentification | Represents a Enterprise Identification |
NXOpen.Annotations.ExportControl | Represents a Export Control |
NXOpen.Annotations.GeneralNote | Represents a General Note |
NXOpen.Annotations.GovernmentSecurityInformation | Represents a Government Security Information |
NXOpen.Annotations.LocatorDesignator | Represents a Locator Designator |
NXOpen.Annotations.MaterialSpecification | Represents a Material Specification |
NXOpen.Annotations.PartIdentification | Represents a Part Identification |
NXOpen.Annotations.PmiInteger | Represents a Pmi Integer |
NXOpen.Annotations.PmiNumber | Represents a Pmi Number |
NXOpen.Annotations.PmiString | Represents a Pmi String |
NXOpen.Annotations.PmiUrlNote | Represents a Pmi url Note |
NXOpen.Annotations.PmiUserDefined | Represents a User Defined Attribute |
NXOpen.Annotations.ProcessSpecification | Represents a Process Specification |
NXOpen.Annotations.SpecificNote | Represents a Specific Note |
NXOpen.Annotations.PmiWave | Represents a Wave |
NXOpen.Annotations.Region | Represents a Region |
NXOpen.Annotations.TableSection | Represents a NXOpen.Annotations.TableSection |
NXOpen.Annotations.PmiTableSection | Represents a PMI table section |
NXOpen.Annotations.TitleBlock | Represents a NXOpen.Annotations.TitleBlock |
NXOpen.Annotations.Table | Represents a NXOpen.Annotations.Table |
NXOpen.Annotations.BendTable | This class represents a bend table |
NXOpen.Annotations.HoleTable | Represents a NXOpen.Annotations.HoleTable |
NXOpen.Annotations.PartsList | Represents a Annotations.PartsList |
NXOpen.Assemblies.Component | Represents a component in a NXOpen.Assemblies.ComponentAssembly |
NXOpen.Assemblies.ExplodedComponent | Represents a NXOpen.Assemblies.Component within an explosion |
NXOpen.Body | Represents a Body |
NXOpen.CAE.CAEBody | Represents a CAE body geometry |
NXOpen.CAE.CAEConnection | Represents Connection Recipe |
NXOpen.CAE.CAEWeldConnection | Represents WeldConnection Recipe |
NXOpen.CAE.CaeDOFSet | Represents a dofset class NXOpen.CAE.CaeDOFSet |
NXOpen.CAE.CAEEdge | Represents a CAE edge geometry |
NXOpen.CAE.CAEFace | Represents a CAE face geometry |
NXOpen.CAE.CAEVertex | Represents a CAE vertex geometry |
NXOpen.CAE.Connections.IConnection | This class represents an interface to a connection object |
NXOpen.CAE.Connections.Adhesive | Adhesive connection |
NXOpen.CAE.Connections.Bolt | Bolt connection |
NXOpen.CAE.Connections.Bushing | Bushing connection |
NXOpen.CAE.Connections.Damper | Damper connection |
NXOpen.CAE.Connections.Kinematic | Kinematic connection |
NXOpen.CAE.Connections.Rigid | Rigid connection |
NXOpen.CAE.Connections.Sealing | Sealing connection |
NXOpen.CAE.Connections.SeamWeld | Seam Weld connection |
NXOpen.CAE.Connections.SpotWeld | Spot Weld connection |
NXOpen.CAE.Connections.Spring | Spring connection |
NXOpen.CAE.Mesh | Represents a Mesh |
NXOpen.CAE.MeshControl | Represents a MeshControl |
NXOpen.CAE.EdgeDensity | Represents a CAE edge density |
NXOpen.CAE.FaceDensity | Represents a CAE face density |
NXOpen.CAE.MappedHole | Represents a CAE mapped hole |
NXOpen.CAE.MeshMate | Represents a Mesh Mate |
NXOpen.CAE.WeldRow | Represents a CAE weld row |
NXOpen.CAE.ResponseSimulation.Sensor | Represents a NXOpen.CAE.ResponseSimulation.Sensor |
NXOpen.CAE.ResponseSimulation.StrainGage | Represents a NXOpen.CAE.ResponseSimulation.StrainGage |
NXOpen.CAE.SelectionRecipe | Represents a class NXOpen.CAE.SelectionRecipe |
NXOpen.CAE.AttributeSelectionRecipe | Represents a Selection Recipe based on attributes |
NXOpen.CAE.BoundingVolumeSelectionRecipe | Represents Bounding Volume based Selection Recipe |
NXOpen.CAE.CoordinateSelectionRecipe | Represents a single node selection recipe based on coordinates |
NXOpen.CAE.LabelRangeSelectionRecipe | Represents a Selection Recipe based on label ranges |
NXOpen.CAE.PointSelectionRecipe | Represents a single node selection recipe based on coordinates of a point |
NXOpen.CAE.SingleLabelSelectionRecipe | Represents a Selection Recipe based on a single Node Label |
NXOpen.CAE.SimBC | Represents BC class which is a superclass to NXOpen.CAE.SimLoad and NXOpen.CAE.SimConstraint |
NXOpen.DatumAxis | Represents a datum axis |
NXOpen.DatumPlane | Represents a datum plane |
NXOpen.Diagramming.BaseObject | Represents the BaseObject class |
NXOpen.Diagramming.Sheet | Represents the Sheet class |
NXOpen.Diagramming.SheetElement | Represents the SheetElement class |
NXOpen.Diagramming.ConnectableElement | Represents the ConnectableElement class |
NXOpen.Diagramming.Annotation | Represents the Annotation class |
NXOpen.Diagramming.Tables.Table | Represents the Table class |
NXOpen.Diagramming.Node | Represents the Node class |
NXOpen.Diagramming.Shape | Represents the Shape class |
NXOpen.Diagramming.Connection | Represents the Connection class |
NXOpen.Diagramming.LeaderLine | Represents the LeaderLine class |
NXOpen.Diagramming.Group | Represents the Group class |
NXOpen.Diagramming.Port | Represents the Port class |
NXOpen.Display.EntitySelectionPlane | Represents a grid on a datum plane |
NXOpen.Display.PlanarShipGrid | Represents a planar ship grid |
NXOpen.Display.Grid | Represents a grid |
NXOpen.Display.ImageBase | Represents a NXOpen.Display.ImageBase that provides definition, orientation, sizing, and display setting controls for image based objects |
NXOpen.Display.RasterImage | Represents a NXOpen.Display.RasterImage that provides placing an imported image onto a plane (with controls for orientation, sizing, and display) to use as a reference in the model to create geometry |
NXOpen.Display.PointCloud | Represents a NXOpen.Display.PointCloud imported from point data files |
NXOpen.Drawings.DraftingBody | Represents a drafting body |
NXOpen.Drawings.DraftingCurve | Represents a Drafting VD Curve |
NXOpen.Drawings.DrawingRegion | Represents a Drawing Region |
NXOpen.Drawings.SectionLine | Represents a Section Line |
NXOpen.Drawings.BaseHalfSectionLine | Represents a Base Half Section Line |
NXOpen.Drawings.HalfSectionLine | Half Section Line is used to create a view with half of the part sectioned and the other half un-sectioned |
NXOpen.Drawings.HalfPictorialSectionLine | Half Pictorial Section Line is used to create a pictorial view with half of the part sectioned and the other half un-sectioned |
NXOpen.Drawings.SketchedHalfSectionLine | Sketched Half Section Line is sketch based section line |
NXOpen.Drawings.BasePointToPointSectionLine | Represents a Base Point to Point Section Line |
NXOpen.Drawings.PointToPointSectionLine | Point to Point Section Line lets you create a view with multiple segment cuts with no bends |
NXOpen.Drawings.SketchedPointToPointSectionLine | Sketched Point to Point Section Line is sketch based section line |
NXOpen.Drawings.BaseSteppedSectionLine | Represents a Base Stepped Section Line |
NXOpen.Drawings.SketchedSteppedSectionLine | A Sketched Simple or Stepped Section Line is sketch based section line |
NXOpen.Drawings.SteppedSectionLine | A Simple or Stepped Section Line |
NXOpen.Drawings.PictorialSectionLine | A Pictorial Simple or Pictorial Stepped Section Line |
NXOpen.Drawings.OrientedSectionLine | Represents a Oriented Section Line |
NXOpen.Drawings.PointAndAngleSectionLine | Point and Angle Section Line lets you create a view with multiple segment cuts with no bends |
NXOpen.Drawings.RevolvedSectionLine | Revolved Section Line is used to create section views which are revolved about an axis |
NXOpen.Edge | Represents an edge |
NXOpen.Face | Represents a face |
NXOpen.Facet.FacetedBody | Represents a faceted body |
NXOpen.Facet.FacetedEdge | Represents a faceted edge |
NXOpen.Facet.FacetedFace | Represents a faceted face |
NXOpen.Fields.Field | Represents an Field abstract class |
NXOpen.CAE.NodalForceReport | Free Body Object |
NXOpen.CAE.ResultProbe | Result Probe Object |
NXOpen.Fields.FieldExpression | Represents the Field Expression class |
NXOpen.Fields.FieldFormula | Represents the Field Formula class |
NXOpen.Fields.FieldLink | Represents the Field Link class |
NXOpen.Fields.FieldLinksTable | Represents the Field LinksTable class |
NXOpen.Fields.FieldReference | Represents an reference field |
NXOpen.Fields.FieldTable | Represents the Field Table class |
NXOpen.GeometricAnalysis.AnalysisObject | Represents an Analysis Object |
NXOpen.GeometricAnalysis.CurveContinuity | Represents a Curve Continuity Analysis builder |
NXOpen.GeometricAnalysis.CurveCurvatureAnalysis | Represents a CurveCurvatureAnalysis builder |
NXOpen.GeometricAnalysis.DeviationGauge | Deviation Gauge analysis object class |
NXOpen.GeometricAnalysis.DraftAnalysis | Represents a Draft Analysis builder |
NXOpen.GeometricAnalysis.FaceAnalysis | Represents a face analysis |
NXOpen.GeometricAnalysis.FaceCurvatureAnalysis | Represents a Face Curvature Analysis builder |
NXOpen.GeometricAnalysis.GapFlushness | Gap and Flushness analysis object class |
NXOpen.GeometricAnalysis.HighlightLinesAnalysis | Represents a Highlight Lines Analysis object |
NXOpen.GeometricAnalysis.LocalRadiusAnalysis | Builder for Local Radius Analysis (formerly Dynamic Radius) |
NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExObject | Represents a Section Analysis Object of the new version |
NXOpen.GeometricAnalysis.SectionAnalysisObject | Represents a Section Analysis object |
NXOpen.GeometricAnalysis.SurfaceContinuityAnalysis | Represents a SurfaceContinuityAnalysis builder |
NXOpen.GeometricAnalysis.SurfaceIntersection | Represents a SurfaceIntersection builder |
NXOpen.Tooling.DieEngTrimAngleCheck | Represents a die engineering trim angle check analysis object |
NXOpen.Group | Represents a gateway group |
NXOpen.Layout2d.Component | Represents the Component object |
NXOpen.LineDesigner.CreateFactoryElement | Represents a create factory element |
NXOpen.LineDesigner.CreateFence | Represents a create fence |
NXOpen.LineDesigner.CreateSystem | Represents a create system |
NXOpen.LineDesigner.ExportToDWG | Represents an export to dwg |
NXOpen.Mechatronics.Accelerometer | Represents the Accelerometer |
NXOpen.Mechatronics.AdapterSignal | Represents the Adapter Signal class |
NXOpen.Mechatronics.CollisionBody | Represents the Collision Body class |
NXOpen.Mechatronics.CollisionSensor | Represents the Collision Sensor |
NXOpen.Mechatronics.DisplayChanger | Represents the Display Changer which is used to change the display properties (Color, Translucency, and Visibility) of rigid body during simulation |
NXOpen.Mechatronics.DistanceSensor | Represents the Distance Sensor |
NXOpen.Mechatronics.ExternalConnection | Represents the External Connection class |
NXOpen.Mechatronics.GenericSensor | Represents the Generic Sensor |
NXOpen.Mechatronics.GraphControl | Represents the Graph Control |
NXOpen.Mechatronics.HydraulicCylinder | Represents the Hydraulic Cylinder |
NXOpen.Mechatronics.HydraulicValve | Represents the Hydraulic Valve |
NXOpen.Mechatronics.Inclinometer | Represents the Inclinometer |
NXOpen.Mechatronics.LimitSwitch | Represents the Limit Switch |
NXOpen.Mechatronics.MATLABSignalConnection | Represents the MATLAB Signal connection class |
NXOpen.Mechatronics.ObjectSink | Represents the Object Sink |
NXOpen.Mechatronics.ObjectSource | Represents the Object Source |
NXOpen.Mechatronics.ObjectTransformer | Represents the Object Transformer |
NXOpen.Mechatronics.PhysicsConstraint | Represents the mechatronics constraint class |
NXOpen.Mechatronics.BreakingConstraint | Represents the Breaking Constraint |
NXOpen.Mechatronics.ChangeMaterial | Represents the Change material constraint |
NXOpen.Mechatronics.Coupling | Represents the mechatronics coupling class |
NXOpen.Mechatronics.Cam | Represents the Cam Constraint |
NXOpen.Mechatronics.Gear | Represents the Gear |
NXOpen.Mechatronics.RackPinion | Represents the Rack and Pinion |
NXOpen.Mechatronics.ThreeJointCoupler | Represents the ThreeJointCoupler |
NXOpen.Mechatronics.ForceTorqueControl | Represents the ForceTorque Control |
NXOpen.Mechatronics.PositionControl | Represents the Position Control |
NXOpen.Mechatronics.PreventCollision | Represents the Prevent Collision Constraint |
NXOpen.Mechatronics.SpeedControl | Represents the Speed Control |
NXOpen.Mechatronics.SpringDamper | Represents the Spring Damper |
NXOpen.Mechatronics.TransmitterEntry | Represents the Transmitter Entry |
NXOpen.Mechatronics.TransmitterExit | Represents the Transmitter Exit |
NXOpen.Mechatronics.PhysicsJoint | Represents the mechatronics joint class |
NXOpen.Mechatronics.AngularLimitJoint | Represents the Angular Limit Joint |
NXOpen.Mechatronics.AngularSpringJoint | Represents the Angular Spring Joint |
NXOpen.Mechatronics.BallJoint | Represents the Ball Joint |
NXOpen.Mechatronics.CurveOnCurveJoint | Represents the CurveOnCurve Joint |
NXOpen.Mechatronics.CylindricalJoint | Represents the Cylindrical Joint |
NXOpen.Mechatronics.FixedJoint | Represents the Fixed Joint |
NXOpen.Mechatronics.HingeJoint | Represents the Hinge Joint |
NXOpen.Mechatronics.LinearLimitJoint | Represents the Linear Limit Joint |
NXOpen.Mechatronics.LinearSpringJoint | Represents the Linear Spring Joint |
NXOpen.Mechatronics.PathConstraintJoint | Represents the Path Constraint Joint class |
NXOpen.Mechatronics.PlanarJoint | Represents the Planar Joint |
NXOpen.Mechatronics.PointOnCurveJoint | Represents the PointOnCurve Joint |
NXOpen.Mechatronics.ScrewJoint | Represents the Screw Joint |
NXOpen.Mechatronics.SlidingJoint | Represents the Sliding Joint |
NXOpen.Mechatronics.TransportSurface | Represents the Transport Surface class |
NXOpen.Mechatronics.PneumaticCylinder | Represents the Pneumatic Cylinder |
NXOpen.Mechatronics.PneumaticValve | Represents the Pneumatic Valve |
NXOpen.Mechatronics.PositionSensor | Represents the Position Sensor |
NXOpen.Mechatronics.ProxyObject | Represents the Proxy Object class |
NXOpen.Mechatronics.Relay | Represents the Relay |
NXOpen.Mechatronics.RigidBody | Represents the Rigid Body class |
NXOpen.Mechatronics.SHMSignalConnection | Represents the SHM Signal connection class |
NXOpen.Mechatronics.SignalAdapter | Represents the Signal Adapter class |
NXOpen.Mechatronics.SignalConnection | Represents the Signal connection class |
NXOpen.Mechatronics.SignalMappingConnection | Represents the Signal Mapping Connection class |
NXOpen.Mechatronics.Tracer | Represents the Tracer class |
NXOpen.Mechatronics.VelocitySensor | Represents the Velocity Sensor |
NXOpen.Mechatronics.VirtualAxis | Represents the Virtual Axis |
NXOpen.Mfg.Mlp.Blank | Represents a Machining Line Planner blank |
NXOpen.Mfg.Mlp.InProcessFeature | Represents a Machining Line Planner in-process feature |
NXOpen.Mfg.Mlp.Line | Represents a Machining Line Planner line |
NXOpen.Mfg.Mlp.MachineTool | Represents a Machining Line Planner machine tool |
NXOpen.Mfg.Mlp.MachiningFeature | Represents a Machining Line Planner machining feature |
NXOpen.Mfg.Mlp.Operation | Represents a Machining Line Planner operation |
NXOpen.Mfg.Mlp.Part | Represents a Machining Line Planner part |
NXOpen.Mfg.Mlp.PartFeature | Represents a Machining Line Planner part-feature |
NXOpen.Mfg.Mlp.ProcessPlan | Represents a Machining Line Planner process plan |
NXOpen.Mfg.Mlp.ProcessSetup | Represents a Machining Line Planner process setup |
NXOpen.Mfg.Mlp.Product | Represents a Machining Line Planner product |
NXOpen.Mfg.Mlp.ToolAssembly | Represents a Machining Line Planner tool assembly |
NXOpen.Mfg.Mlp.ToolSet | Represents a Machining Line Planner tool set |
NXOpen.Mfg.Mlp.Workpiece | Represents a Machining Line Planner workpiece |
NXOpen.Motion.Marker | Represents the Motion Marker class |
NXOpen.Motion.MotionObject | Represents the motion base object class |
NXOpen.Motion.AnalyticalContact | Represents an Analytical Contact motion object |
NXOpen.Motion.AnalyticalContactProperty | Represents an Analytical Contact Property |
NXOpen.Motion.BaseSection | Represents a base section function |
NXOpen.Motion.StandardSection | Represents a standard beam section |
NXOpen.Motion.UserDefinedSection | Represents a user defined section function |
NXOpen.Motion.BeamForce | Represents a BeamForce |
NXOpen.Motion.BodyContact | Represents a NXOpen.Motion.BodyContact |
NXOpen.Motion.Bushing | Represents a bushing |
NXOpen.Motion.Connector | Represents a connector |
NXOpen.Motion.Damper | Represents a damper |
NXOpen.Motion.Spring | Represents a spring |
NXOpen.Motion.ControlInput | Represents a Control Input motion object |
NXOpen.Motion.ControlOutput | Represents a Control Output motion object |
NXOpen.Motion.ControlPort | Represents a motion control port object class |
NXOpen.Motion.Coupler | Represents a motion coupler object |
NXOpen.Motion.CouplerCable | Represents a motion cable object |
NXOpen.Motion.CouplerGear | Represents a motion gear object |
NXOpen.Motion.CouplerRckpn | Represents a motion rack and pinion object |
NXOpen.Motion.CurveContact | Represents a NXOpen.Motion.CurveContact |
NXOpen.Motion.CurveOnCurve | Represents a curve on curve |
NXOpen.Motion.FlexBody | Represents the Motion FlexBody class |
NXOpen.Motion.GeneralCoupler | Represents motion 2-3 joint coupler |
NXOpen.Motion.Joint | Represents a motion joint object |
NXOpen.Motion.JointDriver | Represents a joint driver |
NXOpen.Motion.Link | Represents the Motion Link class |
NXOpen.Motion.LinkCoupler | Represents a NXOpen.Motion.LinkCoupler |
NXOpen.Motion.LinkDriver | Represents a Link Driver |
NXOpen.Motion.LoadTransfer | Represents a Motion Load Transfer class |
NXOpen.Motion.Mechatronics | Represents a Motion.Mechatronics |
NXOpen.Motion.MotionSensor | Represents a motion sensor |
NXOpen.Motion.Motor | Represents a motion motor base object class |
NXOpen.Motion.PMDCMotor | Represents a motion pmdc motor object |
NXOpen.Motion.PointOnCurve | Represents a point on curve |
NXOpen.Motion.PointOnSurface | Represents a point on surface motion object |
NXOpen.Motion.Road | Represents a road |
NXOpen.Motion.ScalarForce | Represents the Motion ScalarForce class |
NXOpen.Motion.ScalarTorque | Represents the Motion ScalarTorque class |
NXOpen.Motion.SplineBeam | Represents a SplineBeam |
NXOpen.Motion.SplineBeamProperty | Represents a SplineBeam Property |
NXOpen.Motion.TextBasedElement | Represents a Motion.TextBasedElement |
NXOpen.Motion.Tire | |
NXOpen.Motion.TireProperty | Tire Property element |
NXOpen.Motion.TirePropertyBasic | |
NXOpen.Motion.TirePropertyCd | CDTIRE Tire Property This is an object that contains parameters needed for the CDTIRE Tire model |
NXOpen.Motion.TirePropertyFt | FTire Tire Property element This is an object that contains parameters needed for the FTire Tire model |
NXOpen.Motion.TirePropertyMotorcycle | |
NXOpen.Motion.TirePropertyNonInertial | |
NXOpen.Motion.TirePropertyTno | TNO Tire Property element This is an object that contains parameters needed for the TNO Tire model |
NXOpen.Motion.VectorForce | Represents a vector force |
NXOpen.Motion.VectorTorque | Represents a vector torque |
NXOpen.Motion.SubmechanismPositioner | Represents a Submechanism Positioner object |
NXOpen.Positioning.DisplayedConstraint | The displayed representation of a constraint, used for graphical display and to represent it in the Assembly Navigator |
NXOpen.ReferenceSet | Represents a NXOpen.ReferenceSet |
NXOpen.Routing.FormboardFrame | The NXOpen.Routing.FormboardFrame is a (not pure) virtual class |
NXOpen.Routing.FormboardFrameCGM | Represents a Formboard Frame CGM |
NXOpen.Routing.FormboardFramePattern | Represents a Formboard Frame Pattern |
NXOpen.Routing.FormboardFrameRectangle | Represents a Formboard Frame Rectangle |
NXOpen.ScCollector | Represents a collector |
NXOpen.Section | Represents a section |
NXOpen.Sketch | Represents a sketch |
NXOpen.SketchConstraint | Represents a constraint in a sketch |
NXOpen.SketchDimensionalConstraint | Represents a dimensional constraint |
NXOpen.SketchHelpedDimensionalConstraint | Represents a dimensional sketch constraint that has a help point or help parameter |
NXOpen.SketchGeometricConstraint | Represents a geometric sketch constraint |
NXOpen.SketchAlignmentConstraint | Represents a sketch alignment constraint |
NXOpen.SketchAssociativeTrim | Represents a sketch associative trim constraint |
NXOpen.SketchG1Constraint | Represents a sketch G1 constraint |
NXOpen.SketchG2Constraint | Represents a sketch G2 constraint |
NXOpen.SketchHelpedGeometricConstraint | Represents a geometric sketch constraint that has a help point or help parameter |
NXOpen.SketchTangentConstraint | Represents a tangent constraint |
NXOpen.SketchTangentToStringConstraint | Represents a sketch tangent to string constraint |
NXOpen.SketchOffset | Represents a sketch offset constraint |
NXOpen.SketchPattern | Represents a sketch pattern constraint |
NXOpen.SmartObject | Represents a smart object |
NXOpen.Axis | Represents an NXOpen.Axis class |
NXOpen.CAE.MeshPoint | Represents a smart NXOpen.CAE.MeshPoint |
NXOpen.CoordinateSystem | Represents a coordinate system |
NXOpen.Curve | Represents a curve |
NXOpen.Direction | Represents a direction |
NXOpen.Offset | Represents a NXOpen.Offset |
NXOpen.Plane | Represents an Plane class |
NXOpen.Point | Represents a smart Point |
NXOpen.Drawings.DraftingPoint | Represents a Drafting VD Point |
NXOpen.Routing.Anchor | A Routing Anchor defines a position in a Qualified Routing component part |
NXOpen.Routing.ControlPoint | Routing Control Points define a position in space, and are used to determine connections from segments to segments, and segments to ports |
NXOpen.Routing.Port | Routing Port Object is a parent class for FixturePort, ExtractPort, FittingPort, Multiport, StockPort and TerminalPort |
NXOpen.Routing.ExtractPort | Routing ExtractPort object is an extract of Port class |
NXOpen.Routing.FittingPort | Represents a Routing Fitting Port ObjectNXOpen.Routing.FittingPort |
NXOpen.Routing.FixturePort | NXOpen.Routing.FixturePort objects are objects that * segments are routed through when creating a routing path |
NXOpen.Routing.MultiPort | Represents a NXOpen.Routing.MultiPort |
NXOpen.Routing.ProxyPort | A NXOpen.Routing.ProxyPort is a port that represents a connector in another design zone, but not present in this design zone |
NXOpen.Routing.StockOffsetPort | NXOpen.Routing.StockOffsetPort class handles the relationship between a component part's port occurrence and the dumb offset port in the work part |
NXOpen.Routing.StockPort | NXOpen.Routing.StockPort objects are automatically created and updated by NXOpen.Routing.Stock objects |
NXOpen.Routing.TerminalPort | |
NXOpen.Scalar | Represents a scalar |
NXOpen.Xform | Represents a smart xform |
NXOpen.SubdivisionMeshBody | Represents a subdivision mesh |
NXOpen.SubdivisionMeshEdge | Represents a subdivision mesh edge |
NXOpen.SubdivisionMeshFace | Represents a subdivision mesh face |
NXOpen.SubdivisionMeshVertex | Represents a subdivision mesh vertex |
NXOpen.Traceline | Represents a traceline |
NXOpen.AutomaticTraceline | Represents an automatic traceline |
NXOpen.UserDefinedObjects.UserDefinedObject | JA interface for the UserDefinedObject object |
NXOpen.Drawings.DraftingView | Represents a drafting view |
NXOpen.Drawings.BaseView | Represents a Base View |
NXOpen.Drawings.DetailView | Represents a Detail View |
NXOpen.Drawings.DrawingView | Drawing View - an empty view created without any geometric objects |
NXOpen.Drawings.ProjectedView | Represents a Projected View |
NXOpen.Drawings.SectionView | Represents a Section View |
NXOpen.Features.Feature | Represents a feature on a part |
NXOpen.BodyDes.OnestepUnform | Represents a onestep unform feature |
NXOpen.Die.Tip | Represents a Tip feature |
NXOpen.Features.AOCS | Represents a Offset In Face feature (aka Associative Offset Curve on Surface ) |
NXOpen.Features.AssociativeArc | Represents a associative arc feature |
NXOpen.Features.AssociativeLine | Represents a associative line feature |
NXOpen.Features.Bead | Represents a Bead feature |
NXOpen.Features.Bend | Represents a Bend feature |
NXOpen.Features.BodyFeature | Represents a feature on a part that has a body associated with it |
NXOpen.Die.CastRelief | Represents a cast relief feature |
NXOpen.Die.ClampingSlot | Represents a clamping slot feature |
NXOpen.Die.Clearance | Represents a die design clearance feature |
NXOpen.Die.DieShoe | Represents a die shoe feature |
NXOpen.Die.DrawBead | Represents a draw bead feature |
NXOpen.Die.FillArea | Represents a die design fill area feature |
NXOpen.Die.FingerClearanceNotch | Represents a die design finger clearance notch feature |
NXOpen.Die.HandlingCore | Represents a die design handling core feature |
NXOpen.Die.Heelpost | Represents a heelpost feature |
NXOpen.Die.Keyway | Represents a keyway feature |
NXOpen.Die.MachineRelief | Represents a die design machine relief feature |
NXOpen.Die.SpringbackCompensation | Represents a springback compensation feature |
NXOpen.Die.TrimFlangeDieAssistant | Represents a trim/flange die assistant |
NXOpen.Features.AdaptiveShell | Represents a adaptive shell feature |
NXOpen.Features.AddendumSurface | Represents an Addendum Surface feature |
NXOpen.Features.AdmMoveFace | Represents a ADM Move Face feature |
NXOpen.Features.AdmOffsetRegion | Represents a linear dimension feature |
NXOpen.Features.AdmResizeFace | Represents an ADM resize face feature |
NXOpen.Features.AeroFlange | Represents a flange feature |
NXOpen.Features.AeroRib | Represents a aero rib feature |
NXOpen.Features.AestheticFaceBlend | Represents an aesthetic face blend feature |
NXOpen.Features.AnalyzePocket | Represents a analyze pocket feature |
NXOpen.Features.AngularDim | Represents a angular dimension feature |
NXOpen.Features.AssemblyCut | Represents an assembly cut feature |
NXOpen.Features.BendTaper | Represents a bend taper feature |
NXOpen.Features.BlendCorner | Represents a blend corner feature |
NXOpen.Features.BlendPocket | Represents a blend pocket feature |
NXOpen.Features.Block | Represents a block feature |
NXOpen.Features.BodyByEquation | Represents a body by equation feature |
NXOpen.Features.BoundedPlane | Represents a bounded plane feature |
NXOpen.Features.Brep | Represents an unparameterized feature |
NXOpen.Features.BridgeSurface | Represents a bridge surface feature |
NXOpen.Features.Chamfer | Represents a chamfer feature |
NXOpen.Features.ChangeShellThickness | Represents a shell face feature |
NXOpen.Features.Coaxial | Represents a coaxial feature |
NXOpen.Features.CombineBodyFeature | Represents a boolean feature |
NXOpen.Features.CombineSheets | Represents a combine sheets feature |
NXOpen.Features.CompensateRoughData | Represents a compensate rough curve or compensate rough sheet feature |
NXOpen.Features.ConcaveFaces | Represents a radius faces feature |
NXOpen.Features.Cone | Represents a cone feature |
NXOpen.Features.Coplanar | Represents a Coplanar feature |
NXOpen.Features.CopyFace | Represents a copy face feature |
NXOpen.Features.CutFace | Represents a cut face feature |
NXOpen.Features.Cylinder | Represents a cylinder feature |
NXOpen.Features.DeleteBody | Represents a delete body feature |
NXOpen.Features.DeleteCurve | Represents a delete curve feature |
NXOpen.Features.DeleteEdge | Represents a delete edge feature |
NXOpen.Features.DeleteFace | Represents a delete face feature , don't use it until nx502 |
NXOpen.Features.Divideface | Represents a Divideface feature |
NXOpen.Features.Draft | Represents a Draft feature |
NXOpen.Features.DraftBody | Represents a draft body feature |
NXOpen.Features.DrawDiePunch | Represents a draw die punch feature |
NXOpen.Features.EdgeBlend | Represents an Edge Blend feature |
NXOpen.Features.EdgeSymmetry | Represents an edge symmetry feature |
NXOpen.Features.EditBend | Represents a edit bend feature |
NXOpen.Features.EditCrossSection | Represents a edit cross section feature |
NXOpen.Features.Emboss | Represents an emboss feature |
NXOpen.Features.Enlarge | Represents an enlarge feature |
NXOpen.Features.ExtendSheet | Represents an extend sheet feature |
NXOpen.Features.Extension | Represents a extension feature |
NXOpen.Features.ExtractFace | Represents a Extract face feature |
NXOpen.Features.Extrude | Represents an extrude feature |
NXOpen.Features.FaceBlend | Represents a Face Blend feature |
NXOpen.Features.FaceSheet | Represents a Face Sheet feature |
NXOpen.Features.FillHole | Represents a fill hole feature |
NXOpen.Features.FitSurface | Represents a fit surface feature |
NXOpen.Features.Fixed | Represents a Fixed feature |
NXOpen.Features.FlatteningAndForming | Represents a flattening and forming feature |
NXOpen.Features.FlowBlend | Represents a flow blend feature |
NXOpen.Features.FreeTransformer | Represents a free transformer feature |
NXOpen.Features.GlobalShaping | Represents a global shaping feature |
NXOpen.Features.GroupFace | Represents a group face feature |
NXOpen.Features.GuidedExtensionEx | Represents a guided extension feature |
NXOpen.Features.HemFlange | Represents a hem flange feature |
NXOpen.Features.HolePackage | Represents a hole package and hole series feature |
NXOpen.Features.IForm | Represents a IForm feature |
NXOpen.Features.LabelChamfer | Represents a label chamfer feature |
NXOpen.Features.LabelNotchBlend | Represents a label notch blend feature |
NXOpen.Features.Lattice | Represents a lattice utility |
NXOpen.Features.LawExtension | Represents a law extension feature |
NXOpen.Features.LawExtensionEx | Represents a law extension feature |
NXOpen.Features.LinearDimension | Represents a linear dimension feature |
NXOpen.Features.LinkedFacet | Represents a linked facet feature |
NXOpen.Features.LocalScaleCurve | Represents a local scale curve feature |
NXOpen.Features.MakeOffset | Represents a make offset feature |
NXOpen.Features.MakeSolid | Represents a make solid feature that converts closed sheet bodies to solid bodies |
NXOpen.Features.MatchEdge | Represents a match edge feature |
NXOpen.Features.MeshSurface | Represents a mesh surface feature |
NXOpen.Features.MeshTransformer | Represents a mesh transformer feature |
NXOpen.Features.Metaform | Represents a metaform feature |
NXOpen.Features.MidSurfaceByFacePairs | Represents a mid surface by face pairs feature |
NXOpen.Features.MidSurfaceFacePair | Represents a mid surface by face pairs feature |
NXOpen.Features.MidSurfaceUserDefined | Represents a midsurface user defined feature |
NXOpen.Features.MirrorBody | Represents a mirror body feature |
NXOpen.Features.MirrorFace | Represents a Mirror Face feature |
NXOpen.Features.MirrorFeature | Represents a mirror feature feature |
NXOpen.Features.MoveCurve | Represents a move curve feature |
NXOpen.Features.MoveEdge | Represents a move edge feature |
NXOpen.Features.MoveFace | Represents a move face feature , don't use it until nx502 |
NXOpen.Features.NSidedSurface | Represents a nsided surface feature |
NXOpen.Features.OffsetEdge | Represents a offset edge feature |
NXOpen.Features.OffsetEmboss | Represents an offset emboss feature |
NXOpen.Features.OffsetFace | Represents a offset face feature |
NXOpen.Features.OffsetFacetBody | Represents a offset facet body feature |
NXOpen.Features.OffsetMoveCurve | Represents a offset move curve feature |
NXOpen.Features.OffsetRegion | Represents an offset region feature , don't use it until nx502 |
NXOpen.Features.OffsetSurface | Represents a offset surface feature |
NXOpen.Features.Parallel | Represents a parallel feature |
NXOpen.Features.PatchOpenings | Represents a Patch Openings feature |
NXOpen.Features.PatternFace | Represents a pattern face feature , don't use it until nx502 |
NXOpen.Features.PatternFaceFeature | Represents a pattern face feature |
NXOpen.Features.Perpendicular | Represents a perpendicular feature |
NXOpen.Features.PierceTask | Represents a Pierce Task feature |
NXOpen.Features.PoleSmoothing | Represents a pole smoothing feature |
NXOpen.Features.Promotion | Represents a promotion feature |
NXOpen.Features.PullFace | Represents a pull face feature |
NXOpen.Features.QuickBinder | Represents a quick binder feature |
NXOpen.Features.RadialDimension | Represents a radial dimension feature |
NXOpen.Features.RefitFace | Represents a refit face feature |
NXOpen.Features.ReorderBlends | Represents a reorder blends feature |
NXOpen.Features.ReplaceBlend | Represents a replace blend feature |
NXOpen.Features.ReplaceFace | Represents a replace face feature , don't use it until nx502 |
NXOpen.Features.ResizeBlend | Represents a resize blend feature , don't use it until nx502 |
NXOpen.Features.ResizeChamfer | Represents a resize chamfer feature |
NXOpen.Features.ResizeChamferCurve | Represents a resize chamfer curve feature |
NXOpen.Features.ResizeCurve | Represents a resize curve feature |
NXOpen.Features.ResizeFace | Represents a resize blend feature , don't use it until nx502 |
NXOpen.Features.Revolve | Represents a revolve feature |
NXOpen.Features.Rib | Represents a rib feature |
NXOpen.Features.Ribbon | Represents a ribbon feature |
NXOpen.Features.Rotor | Represents a Die CAM Rotor feature |
NXOpen.Features.RPO | Represents an RPO dimension |
NXOpen.Features.Hole | Represents a Hole feature |
NXOpen.Features.Ruled | Represents a ruled feature |
NXOpen.Features.Scale | Represents a scale feature |
NXOpen.Features.SectionInertiaAnalysis | Represents a section inertia analysis feature |
NXOpen.Features.SectionSurface | Represents a section surface feature |
NXOpen.Features.ServiceOrientedBodyFeature | Represents a body feature |
NXOpen.Features.SheetMetal.LighteningCutout | Represents a lightening cutout feature |
NXOpen.Features.SheetMetalFromSolid | Represents a Sheet Metal from Solid feature |
NXOpen.Features.Shelf | Represents a shelf feature |
NXOpen.Features.Shell | Represents a Shell feature |
NXOpen.Features.ShellFace | Represents a shell face feature |
NXOpen.Features.ShipDesign.AlongGuideCut | Represents a corner cut feature |
NXOpen.Features.ShipDesign.Bracket | Represents a bracket feature |
NXOpen.Features.ShipDesign.BulkHeads | Represents a bulk head feature |
NXOpen.Features.ShipDesign.CollarPlate | Represents a collar plate feature |
NXOpen.Features.ShipDesign.ConceptFromSpreadsheet | Represents a concept from spreadsheet feature |
NXOpen.Features.ShipDesign.CornerCut | Represents a corner cut feature |
NXOpen.Features.ShipDesign.CustomBracket | Represents a custom bracket feature |
NXOpen.Features.ShipDesign.Cutout2 | Represents a cutout2 feature |
NXOpen.Features.ShipDesign.Deck | Represents a Deck feature in Basic Design |
NXOpen.Features.ShipDesign.Decks | Represents a decks feature |
NXOpen.Features.ShipDesign.Divide | Represents divide feature(s) |
NXOpen.Features.ShipDesign.DvToMvMapping | Represents a plate feature |
NXOpen.Features.ShipDesign.EdgeCut | Represents a edge cut feature |
NXOpen.Features.ShipDesign.EndCut | Represents an end cut feature |
NXOpen.Features.ShipDesign.ExcessMaterial | Represents a excess material feature |
NXOpen.Features.ShipDesign.FrameBarOut | Represents a FrameBarOut |
NXOpen.Features.ShipDesign.GenericPlateSystem | Represents a Generic Plate System feature |
NXOpen.Features.ShipDesign.Hull | Represents a Hull feature |
NXOpen.Features.ShipDesign.InsertSheetBody | Represents a insert sheet body feature |
NXOpen.Features.ShipDesign.ItFrames | Represents a Inter Transverse Frame feature |
NXOpen.Features.ShipDesign.KnuckledProfiles | Represents a knuckled profiles manufacturing preparation feature |
NXOpen.Features.ShipDesign.LongitudinalBulkhead | Represents a Longitudinal Bulkhead feature |
NXOpen.Features.ShipDesign.MainDimensions | Represents a main dimensions feature |
NXOpen.Features.ShipDesign.ManufacturingOut | Represents a ManufacturingOut |
NXOpen.Features.ShipDesign.Pillar | Represents a Pillar feature |
NXOpen.Features.ShipDesign.PinJig | Represents a Pinjig feature |
NXOpen.Features.ShipDesign.Plate | Represents a plate feature |
NXOpen.Features.ShipDesign.PlateChamfer | Represents a plate chamfer feature |
NXOpen.Features.ShipDesign.PlateDivide | Represents a plate divide feature |
NXOpen.Features.ShipDesign.PlatePreparation | Represents a ship plate preparation feature |
NXOpen.Features.ShipDesign.PlateSystem | Represents a Plate System feature |
NXOpen.Features.ShipDesign.Profile | Represents a profile feature |
NXOpen.Features.ShipDesign.ProfileCutout | Represents a profile cutout feature for NX8 |
NXOpen.Features.ShipDesign.ProfileList | Represents a profile list feature |
NXOpen.Features.ShipDesign.ProfileTransition | Represents a profile transition feature |
NXOpen.Features.ShipDesign.ShellTemplate | Represents a shell template feature |
NXOpen.Features.ShipDesign.ShipCoordinates | Represents a ship coordinates feature |
NXOpen.Features.ShipDesign.ShipCutout | Represents a ship cutout feature |
NXOpen.Features.ShipDesign.ShipEndCut | Represents a ship end cut feature |
NXOpen.Features.ShipDesign.ShipFlatPattern | Represents a ship flat pattern feature |
NXOpen.Features.ShipDesign.ShipIntersections | Represents a ship intersection feature |
NXOpen.Features.ShipDesign.ShipProfileCutout | Represents a profile cutout feature for NX75 using sketch expression modifier block |
NXOpen.Features.ShipDesign.ShipSection | Represents a ship section feature |
NXOpen.Features.ShipDesign.ShipTrimBody | Represents a ship trim body feature |
NXOpen.Features.ShipDesign.SteelCollarPlate | Represents a collar plate steel feature |
NXOpen.Features.ShipDesign.SteelDistribution | Represents a steel distribution feature |
NXOpen.Features.ShipDesign.SteelInsulation | Represents a steel insulation feature |
NXOpen.Features.ShipDesign.SteelSupport | Represents a steel support feature |
NXOpen.Features.ShipDesign.SteelVentHoles | Represents a ship vent holes feature |
NXOpen.Features.ShipDesign.Stiffener | Represents a stiffener feature |
NXOpen.Features.ShipDesign.SubSystems | Represents a sub systems feature |
NXOpen.Features.ShipDesign.TransFrame | Represents a TransVerse Frame feature |
NXOpen.Features.ShipDesign.TransverseBulkhead | Represents a Transverse Bulkhead feature |
NXOpen.Features.ShipDesign.UpdateShipLibrary | Represents a update ship library feature |
NXOpen.Features.ShipDesign.VentHolesMarking | Represents a vent holes marking feature |
NXOpen.Features.ShipDesign.VentilationHoles2 | Represents a ventilation holes2 feature |
NXOpen.Features.ShipDesign.WeldCut | Represents a weld cut feature |
NXOpen.Features.ShipDesign.WeldCut2 | Represents a weld cut2 feature |
NXOpen.Features.SilhouetteFlange | Represents a silhouette flange feature |
NXOpen.Features.SnipSurface | Represents a snip surface feature |
NXOpen.Features.SoftBlend | Represents a Soft Blend feature |
NXOpen.Features.Sphere | Represents a sphere feature |
NXOpen.Features.SphericalCorner | Represents a spherical corner feature |
NXOpen.Features.SplitBody | Represents a split body feature |
NXOpen.Features.Step | Represents a step feature |
NXOpen.Features.StudioSurface | Represents a studio surface feature |
NXOpen.Features.StudioSurfaceEx | Represents a new studio surface feature |
NXOpen.Features.StudioXform | Represents a studio xform feature |
NXOpen.Features.StyledBlend | Represents a styled blend feature |
NXOpen.Features.StyledCorner | Represents a styled corner feature |
NXOpen.Features.StyledSweep | Represents a styled sweep feature |
NXOpen.Features.Subdivision.SubdivisionBody | Represents a subdivision body feature |
NXOpen.Features.SweepAlongGuide | Represents a sweep along guide feature |
NXOpen.Features.Swept | Represents a swept feature |
NXOpen.Features.SweptVolume | Represents a swept volume feature |
NXOpen.Features.Symmetric | Represents a symmetric feature |
NXOpen.Features.Tangent | Represents a tangent feature |
NXOpen.Features.Thicken | Represents a thicken feature |
NXOpen.Features.ThroughCurveMesh | Represents a through curve mesh feature |
NXOpen.Features.ThroughCurves | Represents a Through Curves feature |
NXOpen.Features.ToolingBox | Represents a tooling box feature |
NXOpen.Features.TrimAndExtend | Represents a trim and extend feature |
NXOpen.Features.TrimBody2 | Represents a trim body feature |
NXOpen.Features.TrimExtend | Represents a trim extend feature |
NXOpen.Features.TrimLineDevelopment | Represents a trim line development feature |
NXOpen.Features.TrimSheet | Represents a trim sheet feature |
NXOpen.Features.Tube | Represents a tube feature |
NXOpen.Features.Unsew | Represents a Unsew feature |
NXOpen.Features.Untrim | Represents a Untrim feature |
NXOpen.Features.VariableOffset | Represents a variable offset feature |
NXOpen.Features.VarOffsetFace | Represents a var offset face feature |
NXOpen.Features.Varsweep | Represents a Varsweep feature |
NXOpen.Features.VehicleDesign.AllAroundVision | Represents an all-around vision feature |
NXOpen.Features.VehicleDesign.BumperPendulum | Represents a bumper pendulum feature |
NXOpen.Features.VehicleDesign.CrashBarrier | Represents a crash barrier feature |
NXOpen.Features.VehicleDesign.DynamicCurb | Represents a dynamic curb feature |
NXOpen.Features.VehicleDesign.GroundClearance | Represents a ground clearance feature |
NXOpen.Features.VehicleDesign.HeadImpact | Represents a head impact feature |
NXOpen.Features.VehicleDesign.HeadImpactAPillar | Represents a head impact a-pillar feature |
NXOpen.Features.VehicleDesign.HeadImpactBPillar | Represents a head impact b-pillar feature |
NXOpen.Features.VehicleDesign.HeadImpactFrontHeader | Represents a head impact front header feature |
NXOpen.Features.VehicleDesign.HeadImpactOPillar | Represents a head impact side rail feature |
NXOpen.Features.VehicleDesign.HeadImpactOtherRail | Represents a head impact additional side rail feature |
NXOpen.Features.VehicleDesign.HeadImpactRearHeader | Represents a head impact rear header feature |
NXOpen.Features.VehicleDesign.HeadImpactRPillar | Represents a head impact rear pillar feature |
NXOpen.Features.VehicleDesign.HeadImpactSideRail | Represents a head impact side rail feature |
NXOpen.Features.VehicleDesign.HeadImpactUpperRoof | Represents a head impact upper roof feature |
NXOpen.Features.VehicleDesign.InnerAngle | Represents an inner angle feature |
NXOpen.Features.VehicleDesign.MirrorCertification | Represents a mirror certification feature |
NXOpen.Features.VehicleDesign.OilPan | Represents a oil pan feature |
NXOpen.Features.VehicleDesign.PedestrianProtection | Represents a pedestrian protection feature |
NXOpen.Features.VehicleDesign.Slope | Represents a Slope feature |
NXOpen.Features.VehicleDesign.StaticCurb | Represents a static curb feature |
NXOpen.Features.VehicleDesign.TireEnvelope | Represents a tire envelope feature |
NXOpen.Features.VehicleDesign.VisionPlane | Represents a vision plane feature |
NXOpen.Features.VehicleDesign.WheelCovering | Represents a wheel covering feature |
NXOpen.Features.VehicleDesign.WheelFixing | Represents a wheel fixing feature |
NXOpen.Features.WrapGeometry | Represents a wrap geometry feature |
NXOpen.LineDesigner.CoverFeature | Represents a cover feature |
NXOpen.LineDesigner.HoleFeature | Represents a hole feature feature |
NXOpen.Routing.DuctReinforcement | Represents a Duct Reinforcement feature used for creating/editing reinforcements on the inside or outside of rectangular HVAC ducts |
NXOpen.Routing.PlatformFeature | Represents a Platform feature |
NXOpen.Routing.WindCatcher | Represents a Wind Catcher feature |
NXOpen.Tooling.Runner | Represents a runner feature |
NXOpen.Weld.EdgePrep | Represents a Weld Edge Prep feature |
NXOpen.Weld.Fill | Represents a Weld Fill feature |
NXOpen.Weld.Fillet | Represents a Weld Fillet Feature |
NXOpen.Weld.PlugSlot | create a PlugSlot feature for Weld |
NXOpen.Weld.Transform | Represents a Weld Transform Feature |
NXOpen.Weld.UserDefinedWeld | Represents a User Defined Weld feature |
NXOpen.Weld.WeldBead | Represents a Weld Bead feature |
NXOpen.Weld.WeldGroove | Represents a Weld Groove Feature |
NXOpen.Weld.WeldJoint | Represents a weld joint feature |
NXOpen.Features.BreakCorner | Represents a BreakCorner feature |
NXOpen.Features.CircularBlendCurve | Represents a Circular Blend Curve feature |
NXOpen.Features.ClosedCorner | Represents a ClosedCorner feature |
NXOpen.Features.CombinedProjection | Represents a combined projection feature |
NXOpen.Features.CompositeCurve | Represents a composite curve feature |
NXOpen.Features.ContourFlange | Represents a Contour Flange feature |
NXOpen.Features.ConvertToSheetmetal | Represents a ConvertToSheetmetal feature |
NXOpen.Features.CurveFeature | Represents a curve feature |
NXOpen.Features.AddendumSection | Represents an Addendum Section feature |
NXOpen.Features.BridgeCurve | Represents a bridge curve feature |
NXOpen.Features.GeodesicChamfer | Represents a GeodesicChamfer feature |
NXOpen.Features.GeodesicFillet | Represents a GeodesicFillet feature |
NXOpen.Features.GeodesicIntersect | Represents a GeodesicIntersect feature |
NXOpen.Features.GeodesicLine | Represents a GeodesicLine feature |
NXOpen.Features.GeodesicOffset | Represents a GeodesicOffset feature |
NXOpen.Features.GeodesicPoint | Represents a GeodesicPoint feature |
NXOpen.Features.GeodesicProject | Represents a GeodesicProject feature |
NXOpen.Features.GeodesicSketch | Represents a GeodesicSketch feature |
NXOpen.Features.GeodesicTrim | Represents a GeodesicTrim feature |
NXOpen.Features.IntersectionCurve | Represents a NXOpen.Features.IntersectionCurve |
NXOpen.Features.IsoclineCurve | Represents a isocline curve feature |
NXOpen.Features.IsoparametricCurves | Represents a isoparametric curves feature |
NXOpen.Features.Offset3DCurve | Represents a offset 3D curve feature |
NXOpen.Features.OffsetCurve | Represents a offset curve feature |
NXOpen.Features.PointSet | Represents a point set feature |
NXOpen.Features.ProjectCurve | Represents a project curve feature |
NXOpen.Features.ScaleCurve | Represents a scale curve feature |
NXOpen.Features.ServiceOrientedFeatureCurve | Represents a curve feature |
NXOpen.Features.ShipDesign.EdgeReinforcement | Represents a edge reinforcement feature |
NXOpen.Features.ShipDesign.ExpansionDrawing | Represents a expansion drawing feature |
NXOpen.Features.ShipDesign.InverseBendingLines | Represents a inverse bending lines feature |
NXOpen.Features.ShipDesign.ManufacturingPreparation | Represents a manufacturing preparation feature |
NXOpen.Features.ShipDesign.PillarSystem | Represents a pillar system feature |
NXOpen.Features.ShipDesign.ProfileSystem | Represents a profile system feature |
NXOpen.Features.ShipDesign.ReferenceLine | Represents a reference line feature |
NXOpen.Features.ShipDesign.RollingLine | Represents a rolling line feature |
NXOpen.Features.ShipDesign.Seam | Represents a ship design seam feature |
NXOpen.Features.ShipDesign.StandardPart | Represents a standard part feature |
NXOpen.Features.ShipDesign.StiffenerSystem | Represents a stiffener system feature |
NXOpen.Features.ShipDesign.TraceLines | Represents a trace lines feature |
NXOpen.Features.SmoothSpline | Represents a smooth spline feature |
NXOpen.Features.SpineCurve | Represents a spine curve feature |
NXOpen.Features.TrimCurve | Represents a trim curve feature |
NXOpen.Features.TrimCurve2 | Represents a new trim curve feature feature |
NXOpen.Features.VehicleDesign.HoodVisibility | Represents a hood visibility spline feature |
NXOpen.Features.VehicleDesign.ReflectionData | Represents a reflection data feature |
NXOpen.Features.VirtualCurve | Represents a virtual curve feature |
NXOpen.Features.WrapUnwrap | Represents a wrap or unwrap curve feature |
NXOpen.Weld.SurfaceWeld | Represents a surface weld feature |
NXOpen.Features.CurveLength | Represents a curve length feature |
NXOpen.Features.CurveOnSurface | Represents a curve on surface feature |
NXOpen.Features.CustomFeature | Represents a custom feature |
NXOpen.Features.DatumCsys | Represents a Datum Coordinate System feature |
NXOpen.Features.DatumFeature | Represents a Datum feature that is positioned by a set of constraints |
NXOpen.Features.DatumAxisFeature | Represents a datum axis feature |
NXOpen.Features.DatumPlaneFeature | Represents a datum plane feature |
NXOpen.Features.Dimple | Represents a Dimple feature |
NXOpen.Features.DrawnCutout | Represents a DrawnCutout feature |
NXOpen.Features.EdgeRip | Represents an EdgeRip feature |
NXOpen.Features.FeatureGroup | Represents a NXOpen.Features.FeatureGroup |
NXOpen.Features.FitCurve | Represents a fit curve feature |
NXOpen.Features.Flange | Represents a Flange feature |
NXOpen.Features.FlatPattern | Represents a Flat Solid feature |
NXOpen.Features.FlatSolid | Represents a Flat Solid feature |
NXOpen.Features.FlexibleCable | Represents a flexible cable |
NXOpen.Features.GeneralConic | Represents a general conic feature |
NXOpen.Features.Geomcopy | Represents a geomcopy feature |
NXOpen.Features.Gusset | Represents a gusset feature |
NXOpen.Features.Helix | Represents a helix feature |
NXOpen.Features.Human | Represents a human feature |
NXOpen.Features.InstanceFeature | Represents a instance feature |
NXOpen.Features.IsolateFeature | Represents a Isolate Object of feature |
NXOpen.Features.Jog | Represents a Jog feature |
NXOpen.Features.JoinCurves | Represents a join curve feature |
NXOpen.Features.LawCurve | Represents a law curve feature |
NXOpen.Features.LoftedFlange | Represents a Lofted Flange feature |
NXOpen.Features.Louver | Represents a Louver feature |
NXOpen.Features.Maple | Represents a maple feature |
NXOpen.Features.MasterCut | Represents a section view feature |
NXOpen.Features.MathIntegration | Represents a math integration feature |
NXOpen.Features.Mirror | Represents a mirror feature |
NXOpen.Features.MirrorCurve | Represents a mirror curve feature |
NXOpen.Features.MoveObject | Represents a Move-Object feature |
NXOpen.Features.NormalCutout | Represents a Normal Cutout feature |
NXOpen.Features.PartModule | Represents a part module |
NXOpen.Features.PatternFeature | Represents a pattern feature |
NXOpen.Features.PatternGeometry | Represents a pattern geometry feature |
NXOpen.Features.PointFeature | Represents a point feature |
NXOpen.Features.Prebend | Represents a Prebend feature |
NXOpen.Features.RapidSurface | Represents a Rapid Surfacing feature |
NXOpen.Features.RasterImage | Represents a Raster Image feature |
NXOpen.Features.Rebend | Represents a Rebend feature |
NXOpen.Features.ResizeBendAngle | Represents a resize bend angle feature |
NXOpen.Features.ResizeBendRadius | Represents a resize bend radius feature |
NXOpen.Features.ResizeNeutralFactor | Represents a resize neutral factor feature |
NXOpen.Features.ResizePlane | Represents a Resize Datum Plane feature |
NXOpen.Features.SectionCurve | Represents a section curves feature |
NXOpen.Features.SheetMetal.AdvancedFlange | Represents an advanced flange feature |
NXOpen.Features.SheetMetal.Joggle | Represents a joggle feature |
NXOpen.Features.SheetMetal.MultiFlange | Represents a multi flange feature |
NXOpen.Features.ShipDesign.MarkingLine | Represents a marking line feature |
NXOpen.Features.ShipDesign.MarkingLineDesign | Represents a marking line feature |
NXOpen.Features.ShipDesign.OrientationDefinition | Represents a Orientation SubObject |
NXOpen.Features.ShipDesign.ShellExpansion | Represents a shell expansion feature |
NXOpen.Features.ShipDesign.SmartRule | Represents a smart rule feature |
NXOpen.Features.ShipDesign.SplitStandardPart | Represents a split standard part feature |
NXOpen.Features.ShipDesign.StandardPartSCAssist | Represents |
NXOpen.Features.SketchFeature | Represents a sketch feature |
NXOpen.Features.SmoothCurveString | Represents a smooth section feature |
NXOpen.Features.SolidPunch | Represents a Solid Punch feature |
NXOpen.Features.StudioSpline | Represents a studio spline feature |
NXOpen.Features.Tab | Represents a Tab feature |
NXOpen.Features.Text | Represents a text feature |
NXOpen.Features.ThreeBendCorner | Represents a ThreeBendCorner feature |
NXOpen.Features.TrimBody | Represents a Trim Body feature |
NXOpen.Features.Unbend | Represents a Unbend feature |
NXOpen.Features.UniversalUnform | Represents a UniversalUnform feature |
NXOpen.Features.UserDefinedObjectFeature | Represents a User Defined Object feature |
NXOpen.Features.VehicleDesign.CloseRangeVisibility | Represents a close range visibility feature |
NXOpen.Features.VehicleDesign.Manikin | Represents a manikin automotive feature |
NXOpen.Features.VehicleDesign.SeatBeltAnchorage | Represents a seat belt anchorage feature |
NXOpen.Features.VehicleDesign.VehicleCoordinateSystem | Represents a vehicle coordinate system feature |
NXOpen.Features.VehicleDesign.WindshieldDatum | Represents a windshield datum feature |
NXOpen.Features.WaveDatum | Represents a WAVEDATUM feature |
NXOpen.Features.WaveLink | Represents a wavelink feature |
NXOpen.Features.WavePoint | Represents a wavepoint feature |
NXOpen.Features.WaveRouting | Represents a waverouting feature |
NXOpen.Features.WaveSketch | Represents a WAVESKETCH feature |
NXOpen.LineDesigner.ColumnFeature | Represents a column feature feature |
NXOpen.LineDesigner.ConveyorStationFeature | Represents a conveyor station feature feature |
NXOpen.LineDesigner.GateFeature | Represents a gate feature |
NXOpen.LineDesigner.RailingFeature | Represents a rail feature |
NXOpen.LineDesigner.RailOpeningFeature | Represents a rail Opening feature |
NXOpen.LineDesigner.TypedConnectorFeature | Represents a typed connector feature feature |
NXOpen.LineDesigner.DiamondConnectorFeature | Represents a typed connector feature feature |
NXOpen.LineDesigner.HeadConnectorFeature | Represents a typed connector feature feature |
NXOpen.LineDesigner.TailConnectorFeature | Represents a typed connector feature feature |
NXOpen.Measure | Represents a measurement feature |
NXOpen.Routing.FeaturePort | NXOpen.Routing.FeaturePort is a NXOpen.Features.Feature associated with NXOpen.Routing.Port |
NXOpen.SketchIntersectionCurve | Represents a Intersection Curve operation inside sketch |
NXOpen.SketchIntersectionPoint | Represents an Intersection Point operation inside sketch |
NXOpen.Weld.AutoPoint | This class will automatically create weld points from selected components |
NXOpen.Weld.CompoundWeld | Represents a compound weld feature |
NXOpen.Weld.DatumPin | Represents a Weld Datum Pin feature |
NXOpen.Weld.DatumSurface | Represents a Weld Datum Surface feature |
NXOpen.Weld.Extract | Represents a Linked Feature created in the Weld Assistant |
NXOpen.Weld.Groove | Represents a WeldGroove feature |
NXOpen.Weld.Jointmark | Represents a Weld Jointmark Feature |
NXOpen.Weld.JointmarkElement | Represents a Weld |
NXOpen.Weld.PointMark | Represents a Weld PointMark Feature |
NXOpen.Weld.PointMarkPoint | Represents a Weld |
NXOpen.Weld.WeldPoint | Represents a WeldPoint feature |
NXOpen.UserDefinedTemplate.Instantiation | Represents an User Defined Template Instantiation object |
NXOpen.ILocation | Represents something that can be supplied to an location selection |
NXOpen.CAE.MeshPoint | Represents a smart NXOpen.CAE.MeshPoint |
NXOpen.CoordinateSystem | Represents a coordinate system |
NXOpen.DatumAxis | Represents a datum axis |
NXOpen.Direction | Represents a direction |
NXOpen.Point | Represents a smart Point |
NXOpen.IOrientation | Represents something that can be supplied to an orientation selection |
NXOpen.Body | Represents a Body |
NXOpen.CAE.MeshPoint | Represents a smart NXOpen.CAE.MeshPoint |
NXOpen.CoordinateSystem | Represents a coordinate system |
NXOpen.DatumAxis | Represents a datum axis |
NXOpen.DatumPlane | Represents a datum plane |
NXOpen.Face | Represents a face |
NXOpen.Plane | Represents an Plane class |
NXOpen.Point | Represents a smart Point |
NXOpen.IParameterizedSurface | Represents something containing a face |
NXOpen.CAE.CAEFace | Represents a CAE face geometry |
NXOpen.Face | Represents a face |
NXOpen.Facet.FacetedFace | Represents a faceted face |
NXOpen.IProfile | Represents something that can be supplied to a profile |
NXOpen.Curve | Represents a curve |
NXOpen.Edge | Represents an edge |
NXOpen.Face | Represents a face |
NXOpen.Features.Feature | Represents a feature on a part |
NXOpen.Sketch | Represents a sketch |
NXOpen.UserDefinedTemplate.Instantiation | Represents an User Defined Template Instantiation object |
NXOpen.IReferenceAxis | Represents an object that could be used as a reference axis for a feature |
NXOpen.DatumAxis | Represents a datum axis |
NXOpen.DatumPlane | Represents a datum plane |
NXOpen.Direction | Represents a direction |
NXOpen.Edge | Represents an edge |
NXOpen.Face | Represents a face |
NXOpen.ISketchHelpedConstraint | Represents a sketch constraint that has a help point or help parameter |
NXOpen.SketchHelpedDimensionalConstraint | Represents a dimensional sketch constraint that has a help point or help parameter |
NXOpen.SketchHelpedGeometricConstraint | Represents a geometric sketch constraint that has a help point or help parameter |
NXOpen.ISurface | Represents something containing a two dimensional surface |
NXOpen.DatumPlane | Represents a datum plane |
NXOpen.Face | Represents a face |
NXOpen.Plane | Represents an Plane class |
NXOpen.NXObject | A base class providing low-level services for most NXOpen classes |
NXOpen.AME.AMEBaseNode | Represents Base Node |
NXOpen.AME.AMEGroup | Group Journaling class |
NXOpen.AME.AMEGroupFolder | Group Folder Journaling class |
NXOpen.AME.AMEPlcHwItem | Represents Plc Hw Item |
NXOpen.AME.AspectNode | Aspect Node Journaling class |
NXOpen.AME.AspectRoot | AspectRoot Node Journaling class |
NXOpen.AME.CabinetComponentNode | Cabinet Component Node class |
NXOpen.AME.CabinetNode | Cabinet Node class |
NXOpen.AME.CabinetRoot | Cabinet Root Node class |
NXOpen.AME.DeviceFunctionDef | Device Function Def class |
NXOpen.AME.DocumentRoot | Document Root Node class |
NXOpen.AME.EClassDataRoot | EClassData Root Node class |
NXOpen.AME.EClassFolderNode | EClass Folder Node class |
NXOpen.AME.EClassNode | EClassData Tree Node class |
NXOpen.AME.EClassObjectNode | EClassData Tree Node class |
NXOpen.AME.EClassClassNode | EClassData Tree Node class |
NXOpen.AME.EClassSegmentNode | EClass Segment Node class |
NXOpen.AME.EClassVersionNode | EClass Version Node class |
NXOpen.AME.GroupRoot | Group Root Node Journaling class |
NXOpen.AME.ImportNode | Import Object Journaling class |
NXOpen.AME.ImportObject | Import Object Journaling class |
NXOpen.AME.PageNode | Represents a Page Node |
NXOpen.AME.PlcBlock | Plc Block Node Journaling class |
NXOpen.AME.PlcRule | PlcRule Journaling class |
NXOpen.AME.ProductComponent | Product Component class |
NXOpen.AME.ProductComponentInstance | Product Component Instance class |
NXOpen.AME.ProductDefinitionRoot | Product Definition Root class |
NXOpen.AME.QueryFolder | Query Folder Journaling class |
NXOpen.AME.QueryNode | The Query Node |
NXOpen.AME.ReferenceDesignationSetNode | Reference Designation Set Node Journaling class |
NXOpen.AME.SymbolRoot | Symbol Root Node class |
NXOpen.AME.UpstreamDataRoot | UpstreamData Root Node class |
NXOpen.AME.AMEEngineeringObjectLabel | Represents Engineering Object Label Object |
NXOpen.AME.AMEEngObject | Represents Engineering Object |
NXOpen.AME.AMEExtendedObject | Represents Extended Object |
NXOpen.AME.AMEPort | Represents Port |
NXOpen.AME.PlcSoftwareGenPort | PlcSoftwareGenPort Journaling class |
NXOpen.AME.MultiValueObjectsPort | MultiValueObjectsPort Journaling class |
NXOpen.AME.InterfaceMemberPort | InterfaceMemberPort Journaling class |
NXOpen.AME.AssignmentPort | Represents AssignmentPort |
NXOpen.AME.EPLANPlug | Represents EPLANPlug |
NXOpen.AME.EPLANSocket | Represents EPLANSocket |
NXOpen.AME.PlcMethod | Plc Method Node Journaling class |
NXOpen.AME.AMENamingRule | Represents Naming Rule Object |
NXOpen.AME.AMEQuery | The Query Object |
NXOpen.AME.AMEQueryGroup | The Query Group |
NXOpen.AME.AMEReportRule | Represents Report Rule Object |
NXOpen.AME.ApplicationBuilder | Create the AD application builder see AMEApplicationBuilder |
NXOpen.AME.AttributeHolder | JA class for the AttributeHolder object |
NXOpen.AME.PortAttributeHolder | Port Object Atributes Holder |
NXOpen.AME.BaseDefinitionAttributeHolder | BaseDefinition Atributes Holder Object |
NXOpen.AME.CabinetObject | Cabinet Object class |
NXOpen.AME.EOAttributeHolder | EOAttributeHolder Atributes Holder Object |
NXOpen.AME.EODataItemAttributeHolder | EODef Atributes Holder Object |
NXOpen.AME.EODefAttributeHolder | EODef Atributes Holder Object |
NXOpen.AME.EPLANProjectSettings | Eplan project settings Node Journaling class |
NXOpen.AME.EplanStructureSettings | Eplan structure settings Journaling class |
NXOpen.AME.ExpressionEvaluator | Represents an Expression Evaluator |
NXOpen.AME.ExtractAttribute | Extract Attribute Journaling class |
NXOpen.AME.FormSheetObject | JA class for the FormSheetObject |
NXOpen.AME.FragmentAttributeHolder | Fragment Object Atributes Holder |
NXOpen.AME.LDCachedAttribute | JA class for the Line Design cache Attribute object |
NXOpen.AME.MountingInterface | Represents a Mounting Interface |
NXOpen.AME.PageAttributeHolder | Page Object Atributes Holder |
NXOpen.AME.PlcCodePosition | Represents Plc Code Position Object |
NXOpen.AME.PortArtifact | Represents a base class that provides common methods for port artifact in a NXOpen.PDM.ConditionalElementRevision |
NXOpen.AME.ProductDefAttributeHolder | ProductDefinition Atributes Holder Object |
NXOpen.AME.ProductDefinition | JA class for the Product Definition object |
NXOpen.AME.Project | Project Journaling class |
NXOpen.AME.QueryClause | JA class for the QueryClause object |
NXOpen.AME.SchematicSymbol | Represents a Schematic Symbol object |
NXOpen.AME.SWStatusItem | Represents SW Status Item |
NXOpen.AME.TiaPortalProjectSettings | Tia Portal project settings node journaling class |
NXOpen.Annotations.BusinessModifier | Represents a business modifier object |
NXOpen.Annotations.ListBusinessModifier | Represents a base class for list based business modifiers |
NXOpen.Annotations.CustomerValueBusinessModifier | Represents business modifier that applies customer values such as CTQ (Critical To Quality), KC (Key Characteristic) to a PMI |
NXOpen.Annotations.FeatureIdBusinessModifier | Represents buiness modifier that indicates a featire identification PMI object |
NXOpen.Annotations.SafetyClassBusinessModifier | Represents buiness modifier that applies safety classification such as Critical, Major to a PMI |
NXOpen.Annotations.RevisionBusinessModifier | Represents business modifier that applies a revision (in the string format such as -A1) to a PMI |
NXOpen.Annotations.UrlBusinessModifier | Represents business modifier that applies an URL to a PMI |
NXOpen.Annotations.MasterSymbol | Represents a part symbol folder |
NXOpen.Annotations.OrdinateMargin | Represents an ordinate margin |
NXOpen.Annotations.HorizontalOrdinateMargin | Represents a horizontal ordinate margin |
NXOpen.Annotations.VerticalOrdinateMargin | Represents a vertical ordinate margin |
NXOpen.Annotations.PartSymbolFolder | Represents a part symbol folder |
NXOpen.Annotations.Pmi | Represents a PMI(Product and Manufacturing Information) object |
NXOpen.Annotations.PmiAttributeValue | Represents a PMI Attribute Value |
NXOpen.Annotations.PmiAttributeValueInteger | Represents a PMI Attribute Integer Value |
NXOpen.Annotations.PmiAttributeValueList | Represents a PMI Attribute List Value |
NXOpen.Annotations.PmiAttributeValueMultipleString | Represents a PMI Attribute MultipleString Value |
NXOpen.Annotations.PmiAttributeValueNumber | Represents a PMI Attribute Number Value |
NXOpen.Annotations.PmiAttributeValueString | Represents a PMI Attribute String Value |
NXOpen.Annotations.PmiAttributeValueUrl | Represents a PMI Attribute Url Value |
NXOpen.Annotations.PmiFilter | Represents a base class for a PMI filter |
NXOpen.Annotations.PmiFilterByPart | Represents a PMI filter defined by a set of parts |
NXOpen.Annotations.PmiFilterByType | Represents a PMI filter defined by a set of types |
NXOpen.Annotations.PmiFilterByView | Represents a PMI filter defined by a set of views |
NXOpen.Annotations.SymbolFile | Represents a symbolFile |
NXOpen.Assemblies.Arrangement | Manages the suppression of NXOpen.Assemblies.Component s within a NXOpen.Assemblies.ComponentAssembly |
NXOpen.Assemblies.Assembly | Assembly class |
NXOpen.Assemblies.ClearanceSet | Represents NXOpen.Assemblies.ClearanceSet |
NXOpen.Assemblies.ComponentAssembly | Represents the set of NXOpen.Assemblies.Component s that make up an assembly |
NXOpen.Assemblies.ComponentGroup | Represents a Component Group that is defined within an Assembly |
NXOpen.Assemblies.ComponentPattern | Represents the component pattern class |
NXOpen.Assemblies.DrawingExplosion | Represents an explosion used in a drawing view of an arrangement |
NXOpen.Assemblies.Explosion | Represents an explosion |
NXOpen.Assemblies.FindInCollaborativeDesign | FindInCollaborativeDesign is a searcher for performing simple searches in the context of a subset |
NXOpen.Assemblies.Order | Represents base class for all Order classes |
NXOpen.Assemblies.ComponentOrder | Represents an order object that stores the order of child NXOpen.Assemblies.Component s in context of parent NXOpen.Assemblies.ComponentAssembly |
NXOpen.Assemblies.Partition | A partition is a Teamcenter object in a Collaborative Design |
NXOpen.Assemblies.PartitionScheme | A partition scheme is a Teamcenter object in a Collaborative Design |
NXOpen.Assemblies.PatternMember | Represents the pattern member object |
NXOpen.Assemblies.PatternInstance | Represents the pattern instance object |
NXOpen.Assemblies.PatternMaster | Represents the pattern master object |
NXOpen.Assemblies.PositioningGroup | Represents the class for positioning group |
NXOpen.Assemblies.PositioningTask | Represents the class for positioning task |
NXOpen.Assemblies.ProductInterface.InterfaceObject | Represents a Product Interface Object Builder |
NXOpen.Assemblies.SearchResultElement | A search result element can be produced as the result of a search performed in the context of a NXOpen.Assemblies.SubsetBuilder |
NXOpen.Assemblies.SearchTerm | A search term is used to specify a search for the contents of a NXOpen.Assemblies.Subset |
NXOpen.Assemblies.AttributeSearchTerm | An attribute search term within a NXOpen.Assemblies.SubsetRecipe |
NXOpen.Assemblies.BoxSearchTerm | A volume search term within a NXOpen.Assemblies.SubsetRecipe |
NXOpen.Assemblies.ExplicitSearchTerm | A NXOpen.Assemblies.SubsetRecipe search term that refers explicitly to a design element |
NXOpen.Assemblies.GroupSearchTerm | A group of NXOpen.Assemblies.SearchTerm s within a NXOpen.Assemblies.SubsetRecipe |
NXOpen.Assemblies.PartitionSearchTerm | A Assemblies.SubsetRecipe search term that refers to a partition |
NXOpen.Assemblies.PlaneSearchTerm | A plane search term within a NXOpen.Assemblies.SubsetRecipe |
NXOpen.Assemblies.ProximitySearchTerm | A proximity search term within a NXOpen.Assemblies.SubsetRecipe |
NXOpen.Assemblies.RunContentProximitySearchTerm | A proximity search term within a NXOpen.Assemblies.SubsetRecipe |
NXOpen.Assemblies.Subset | A subset is a set of design elements within a collaborative design |
NXOpen.BasePart | Base class for an NX part |
NXOpen.CAE.CaePart | This is an abstract class for NX parts of type .fem and .sim |
NXOpen.CAE.BaseFemPart | Represents an NX part of type .afm |
NXOpen.CAE.AssyFemPart | Represents an NX part of type .afm |
NXOpen.CAE.FemPart | Represents an NX part of type .fem |
NXOpen.CAE.SimPart | Represents an NX part of type .sim |
NXOpen.Part | Represents an NX part of type .prt |
NXOpen.BasePropertyTable | Represents a property table |
NXOpen.CAE.PropertyTable | Represents a property table |
NXOpen.CAE.AdaptivityExclusionZone | Represents a NXOpen.CAE.AdaptivityExclusionZone |
NXOpen.CAE.AdaptivityMetaSolution | Represents a NXOpen.CAE.AdaptivityMetaSolution |
NXOpen.CAE.AeroStructures.Author.CalculationContext | Calculation context is passed to the method implementation |
NXOpen.CAE.AeroStructures.Author.InputParameter | parent class of all typed input parameter classes |
NXOpen.CAE.AeroStructures.Author.InputBoolean | Represents a boolean input parameter |
NXOpen.CAE.AeroStructures.Author.InputInteger | Represents an integer input parameter |
NXOpen.CAE.AeroStructures.Author.InputLoad | represent a load input parameter |
NXOpen.CAE.AeroStructures.Author.InputScalar | Represents a scalar input parameter |
NXOpen.CAE.AeroStructures.Author.InputText | Represents a text input parameter |
NXOpen.CAE.AeroStructures.Author.OutputParameter | Parent class of all the typed output parameter classes |
NXOpen.CAE.AeroStructures.Author.OutputBoolean | Represents a boolean output parameter |
NXOpen.CAE.AeroStructures.Author.OutputInteger | Represents an integer output parameter |
NXOpen.CAE.AeroStructures.Author.OutputScalar | Represents a scalar output parameter |
NXOpen.CAE.AeroStructures.Author.OutputText | Represents a text output parameter |
NXOpen.CAE.AeroStructures.LoadCase | Represents a NXOpen.CAE.AeroStructures.LoadCase |
NXOpen.CAE.AeroStructures.LoadCaseSet | Represents a NXOpen.CAE.AeroStructures.LoadCaseSet |
NXOpen.CAE.AeroStructures.ManualLoadExtraction | This is the ManualLoadExtraction class |
NXOpen.CAE.AeroStructures.MarginCalculation | This is the MarginCalculation |
NXOpen.CAE.AeroStructures.MarginResultTableDataProvider | MarginResultTableDataProvider used by the global results editor provides a table view of the results of all of a subset of the calculation of a margin solution |
NXOpen.CAE.AeroStructures.MarginSolution | Represents a NXOpen.CAE.AeroStructures.MarginSolution |
NXOpen.CAE.AutoPairs | Represents an autopairs obj |
NXOpen.CAE.BeamSection | Represents a Beam Cross Section |
NXOpen.CAE.GeneralGeometryBeamSection | Represents a General Geometry Beam Cross Section |
NXOpen.CAE.StandardBeamSection | Represents a Standard Beam Cross Section |
NXOpen.CAE.UserDefinedSolidBeamSection | Represents a User-Defined Solid Beam Cross Section |
NXOpen.CAE.Bolt | Represents Bolt |
NXOpen.CAE.CaeGroup | Represents a group class NXOpen.CAE.CaeGroup |
NXOpen.CAE.CfdAutoRefinementConstraint | The automatic refinement constraint is used by surface wrap recipes |
NXOpen.CAE.CfdContactPreventionConstraint | The contact prevention constraint is a type of constraint which is used by the Fluid Domain Recipe to generate a fluid domain |
NXOpen.CAE.CfdLocalResolutionConstraint | The local resolution constraint is a type of constraint which is used by the Fluid Domain Recipe to generate a fluid domain |
NXOpen.CAE.Connections.Folder | The Folder class offers a way to create a hierarchy of connections and sub-folders |
NXOpen.CAE.Connections.NodalTarget | This class represents an Interface to the Connection Target |
NXOpen.CAE.Connections.NodalTargetSetOfPoints | Set of Points Target |
NXOpen.CAE.Connections.NodalTargetSinglePoint | Group of Points Target |
NXOpen.CAE.Connections.NodalTargetSpider | Group of Points Target |
NXOpen.CAE.CorrelSolution | Represents a NXOpen.CAE.CorrelSolution , which is a meta-solution used to compare results from two structural dynamics solutions |
NXOpen.CAE.ModelUpdateSolution | Represents a NXOpen.CAE.ModelUpdateSolution , which is a meta-solution used to update finite element models to match real life test data |
NXOpen.CAE.DataProcessing | Represents a NXOpen.CAE.DataProcessing |
NXOpen.CAE.DataProcessingBlock | Represents a NXOpen.CAE.DataProcessingBlock |
NXOpen.CAE.DataSource | This is the class representing a scenario data source |
NXOpen.CAE.DependentMeshListItemBuilder | Represents a NXOpen.CAE.DependentMeshListItemBuilder |
NXOpen.CAE.DurabilityAxisSearch | Represents a NXOpen.CAE.DurabilityAxisSearch |
NXOpen.CAE.DurabilityEvent | Represents a NXOpen.CAE.DurabilityEvent , which is an event of a durability solution process |
NXOpen.CAE.DurabilityRandomEvent | Represents a NXOpen.CAE.DurabilityRandomEvent |
NXOpen.CAE.DurabilityStaticEvent | Represents a NXOpen.CAE.DurabilityStaticEvent |
NXOpen.CAE.DurabilityTransientEvent | Represents a NXOpen.CAE.DurabilityTransientEvent |
NXOpen.CAE.DurabilityExcitation | Represents a NXOpen.CAE.DurabilityExcitation |
NXOpen.CAE.DurabilityFunctionExcitation | Represents a NXOpen.CAE.DurabilityFunctionExcitation |
NXOpen.CAE.DurabilityLoadPattern | Represents a NXOpen.CAE.DurabilityLoadPattern |
NXOpen.CAE.DurabilityResultPath | Represents a NXOpen.CAE.DurabilityResultPath |
NXOpen.CAE.DurabilityFatigue | Represents a NXOpen.CAE.DurabilityFatigue |
NXOpen.CAE.DurabilityMetaSolution | Represents a NXOpen.CAE.DurabilityMetaSolution |
NXOpen.CAE.DurabilityRandomFatigue | Represents a NXOpen.CAE.DurabilityRandomFatigue |
NXOpen.CAE.DurabilitySolveOptions | Represents a NXOpen.CAE.DurabilitySolveOptions |
NXOpen.CAE.DurabilityStrength | Represents a NXOpen.CAE.DurabilityStrength |
NXOpen.CAE.DurSpecialistAnalysisType | TODO: Add documentation |
NXOpen.CAE.DurSpecialistSimulationObjectTable | Represents a NXOpen.CAE.DurSpecialistSimulationObjectTable |
NXOpen.CAE.FEModelOccAttribute | This class represents an Interface to the Finite Element Model Attributes |
NXOpen.CAE.ModifiableFEModelOccAttribute | This class represents an Interface to the Finite Element Model |
NXOpen.CAE.FemSignalProcessingSignalAttributes | Implementation of the NXOpen.Fields.IApplicationData |
NXOpen.CAE.FluidDomainRecipe | Represents a FluidDomainRecipe |
NXOpen.CAE.FTK.BaseRecord | Manages the base record |
NXOpen.CAE.FTK.ArrayRecord2D | Manages the 2d array record |
NXOpen.CAE.FTK.Op2Record | Represents the op2 record data |
NXOpen.CAE.FTK.SectionBasedMatrixRecord | Represents a kind of record data could be displayed by 3D graphing |
NXOpen.CAE.FTK.BaseUnit | Manages the base unit |
NXOpen.CAE.Function | Represents a function object |
NXOpen.Motion.MotionFunction | Represents a Motion Function Object |
NXOpen.CAE.GeometryRecipe | Represents a Geometry Recipe |
NXOpen.CAE.FreezeGeometryRecipe | Represents FreezeGeometryRecipe |
NXOpen.CAE.IFEModel | This class represents an Interface to the Finite Element Model |
NXOpen.CAE.BaseFEModel | This class represents an Assembly Finite Element Model |
NXOpen.CAE.AssyFEModel | This class represents an Assembly Finite Element Model |
NXOpen.CAE.FEModel | This class represents a Finite Element Model |
NXOpen.CAE.FEModelOccurrence | This class represents a Finite Element Model Occurrence |
NXOpen.CAE.IMeshCollector | Represents the base IMeshCollector class for MeshCollector and MeshCollectorOccurrence classes |
NXOpen.CAE.MeshCollector | Represents a MeshCollector |
NXOpen.CAE.MeshCollectorOccurrence | Represents a MeshCollector Occurrence |
NXOpen.CAE.LaminateDrapingData | Encapsulate the ply information related to the draping algorithm |
NXOpen.CAE.LaminateDrapingExtension | Encapsulate the ply information related to a ply draping extension |
NXOpen.CAE.LaminateDrapingOrientation | Encapsulates the ply draping results |
NXOpen.CAE.LaminateDynamicEvent | The Laminate Dynamic Event |
NXOpen.CAE.LaminateRandomEvent | The Laminate Dynamic Event |
NXOpen.CAE.LaminateSineEvent | The Laminate Sine Event |
NXOpen.CAE.LaminateDynamicSim | The Laminate Dynamic Simulation builder is the journalling interface to build the LaminateDyanmicSim object |
NXOpen.CAE.LaminateExtrudeSetup | Extrude Setup |
NXOpen.CAE.LaminateFiberOrientationOptions | Laminate Fiber Orientation Options |
NXOpen.CAE.LaminateGlobalLayup | Represent a global layup in the ply based modeling |
NXOpen.CAE.LaminateGraphicalReport | Represents a laminate graphical report |
NXOpen.CAE.LaminateIDrapingOrientation | Encapsulates the ply draping results |
NXOpen.CAE.LaminateLayupOffset | laminate layup offset |
NXOpen.CAE.LaminateMatOrientation | Laminate Material Orientation |
NXOpen.CAE.LaminateModeProperty | Represents the properties of one normal mode |
NXOpen.CAE.LaminatePly | Represents one ply in a laminate layup |
NXOpen.CAE.LaminatePlyGroup | Represents one ply group in a laminate layup |
NXOpen.CAE.LaminatePostReport | Represents an advanced post reporting setup for laminate results |
NXOpen.CAE.LaminateQuickReport | Represents a laminate quick report |
NXOpen.CAE.LaminateSpreadsheetReport | Represents a laminate spreadsheet report |
NXOpen.CAE.ManualSweepBetweenListItemSelection | Represents a NXOpen.CAE.ManualSweepBetweenListItemSelection |
NXOpen.CAE.MeshManualSweepBetweenListItemSelection | Represents a NXOpen.CAE.MeshManualSweepBetweenListItemSelection |
NXOpen.CAE.ModelCheck.ElementQualitySetting | |
NXOpen.CAE.ModelCheck.ElementSpecificTestValue | Represents the quality setting for a specfied element reference |
NXOpen.CAE.ModelCheck.QualityTestValue | Represents quality test settings of a specified test type |
NXOpen.CAE.ModelUpdateDesignVariable | Represents a NXOpen.CAE.ModelUpdateDesignVariable , which is a meta-solution used to update finite element models to match real life test data |
NXOpen.CAE.NamedPropertyTable | Represents a NXOpen.CAE.NamedPropertyTable which is a superclass to NXOpen.CAE.PhysicalPropertyTable |
NXOpen.CAE.Connections.Element | This is the class to access a connection element |
NXOpen.CAE.ModelingObjectPropertyTable | Represents a Modeling Object Property Table |
NXOpen.CAE.NamedPropTableWithTargetSet | Represents a Solver Specific Modeling Object with associated target set(s) |
NXOpen.CAE.CaeRegion | Represents a cae region object |
NXOpen.CAE.PhysicalPropertyTable | Represents a Physical Property Table |
NXOpen.CAE.SimConstraintSet | Represents a cae constraint set object |
NXOpen.CAE.SimLoadSet | Represents a cae load set object |
NXOpen.CAE.NoteFolder | Represents an object that manages annotation for CAE |
NXOpen.CAE.Optimization.DAOConstraint | Represents a NXOpen.CAE.Optimization.DAOConstraint |
NXOpen.CAE.Optimization.DAODesignVariable | Represents a NXOpen.CAE.Optimization.DAODesignVariable |
NXOpen.CAE.Optimization.DAOObjective | Represents a NXOpen.CAE.Optimization.DAOObjective |
NXOpen.CAE.Optimization.DAOSolution | Represents a NXOpen.CAE.Optimization.DAOSolution |
NXOpen.CAE.Optimization.DAOStopCondition | Represents a NXOpen.CAE.Optimization.DAOStopCondition |
NXOpen.CAE.Optimization.TBSCheckDOF | Represents the restriction of dispacement in the coordinate direction of the referenced coordinate system |
NXOpen.CAE.Optimization.TBSConstraint | Represents the design constraint, which is defined with NXOpen.CAE.Optimization.TBSDesignVariable |
NXOpen.CAE.Optimization.TBSDesignArea | Represents the design area |
NXOpen.CAE.Optimization.TBSDesignVariable | Represents the design variable referenced by NXOpen.CAE.Optimization.TBSConstraint and NXOpen.CAE.Optimization.TBSObjectives |
NXOpen.CAE.Optimization.TBSDesignResponse | Represents the design response referenced by NXOpen.CAE.Optimization.TBSConstraint and NXOpen.CAE.Optimization.TBSObjectives |
NXOpen.CAE.Optimization.TBSMeshSmooth | Represents the mesh smooth |
NXOpen.CAE.Optimization.TBSOptimizationSolution | Represents the solution to contain optimization setting |
NXOpen.CAE.Optimization.TBSShapeOptimizationSolution | Represents a shape optimization solution |
NXOpen.CAE.Optimization.TBSTopologyOptimizationSolution | Represents the topology optimization solution |
NXOpen.CAE.Optimization.TBSRestrictArea | Represents the restrictions for the design variable in an optimization |
NXOpen.CAE.Optimization.TBSShapeRestrictArea | Represents the restrictions of the design variable in Shape optimization |
NXOpen.CAE.Optimization.TBSTopologyRestrictArea | Represents the restrictions of the design variable in topology optimization |
NXOpen.CAE.Optimization.TBSSmooth | Represents the parameters that control the generation of surfaces by optimization |
NXOpen.CAE.Optimization.TBSTestFunction | Represents a test displacement for shape optimization or bead optimization |
NXOpen.CAE.PostGraph | This class provides interfaces to query graph attributes |
NXOpen.CAE.PostScenario | This class represents a NXOpen.CAE.PostScenario |
NXOpen.CAE.PreTestDofSet | Represents Dof Set within a pre-test setup |
NXOpen.CAE.PreTestExciterConfig | Represent a exciter selection configuration |
NXOpen.CAE.PreTestSensorConfig | Represent a sensor selection configuration |
NXOpen.CAE.PreTestSolution | Represents a pre-test setup |
NXOpen.CAE.QualityAudit.Action | The Quality Audit Action is a base class that performs actions on a list of objects |
NXOpen.CAE.QualityAudit.ComponentSynthesis | This action has as result a list of components and the connections using them |
NXOpen.CAE.QualityAudit.ConnectionDistanceCheck | This action checks the distance between connections |
NXOpen.CAE.QualityAudit.ConnectionPointsDistanceCheck | This action checks the distance between connection's definition points |
NXOpen.CAE.QualityAudit.ConnectivityCheck | This action's output is a list of connected groups together with the involved connections |
NXOpen.CAE.QualityAudit.DiameterCheck | This action performs checks on connections supporting diameter and displays errors when diameter is different from the expected one |
NXOpen.CAE.QualityAudit.FreeEdgeDistanceCheck | This action checks if there are connections that are too close to the edge based on a configurable tolerance |
NXOpen.CAE.QualityAudit.ListConnections | This action has as result the list of all connections from the specified model |
NXOpen.CAE.QualityAudit.ListNonModeledConnections | This action's output is a list of connections that are not realized |
NXOpen.CAE.QualityAudit.MeshLevelProjectionCheck | This action has as output the list of failed projections of the universal connections at mesh level |
NXOpen.CAE.QualityAudit.ObjectLevelProjectionCheck | This action has as output the list of failed projections of the universal connections at object level |
NXOpen.CAE.QualityAudit.SupportSequenceCheck | This action's output is the list of connections having more than 2 supports with wrong order (e.g |
NXOpen.CAE.QualityAudit.ActionList | The Quality Audit ActionList class offers means to select, deselect, obtain NXOpen.CAE.QualityAudit.Action instances |
NXOpen.CAE.QualityAudit.ActionSettings | The Quality Audit ActionSettings is the base class for NXOpen.CAE.QualityAudit.Action settings |
NXOpen.CAE.QualityAudit.MinimumDistanceSettings | This class contains the minimum distance settings available for the following actions: NXOpen.CAE.QualityAudit.FreeEdgeDistanceCheck NXOpen.CAE.QualityAudit.ConnectionDistanceCheck NXOpen.CAE.QualityAudit.ConnectionPointsDistanceCheck |
NXOpen.CAE.QualityAudit.ProjectionCheckSettings | This class contains settings used by the projection checks |
NXOpen.CAE.QualityAudit.InputList | The Quality Audit InputList class offers means to select, deselect, obtain the objects to be used by CAE.QualityAudit.Action instances |
NXOpen.CAE.QualityAudit.Result | The Quality Audit Result class offers means to access information about specific problems found while performing specific quality audit checks |
NXOpen.CAE.QualityAudit.ConnectionDistanceResult | The Quality Audit ConnectionPointsDistanceResult is a class containing information about failed distance between connection distance checks on universal connections |
NXOpen.CAE.QualityAudit.ConnectionPointsDistanceResult | The Quality Audit ConnectionPointsDistanceResult is a class containing information about failed distance between connection points checks on universal connections |
NXOpen.CAE.QualityAudit.DiameterResult | The Quality Audit DiameterResult is a class containing information about failed diameter checks of universal connections |
NXOpen.CAE.QualityAudit.FreeEdgeDistanceResult | The Quality Audit FreeEdgeDistanceResult contains information about problematic places where distance between connection points and free edges is less than a given value |
NXOpen.CAE.QualityAudit.ListConnectionsResult | The Quality Audit ListConnectionsResult is a class containing information about connections found when performing the NXOpen.CAE.QualityAudit.ListConnections action |
NXOpen.CAE.QualityAudit.ListNonModeledConnectionsResult | This is a class containing information about the non modeled universal connections |
NXOpen.CAE.QualityAudit.ManualElementsResult | The Quality Audit ManualElementsResult is a class containing information about nodes connecting components |
NXOpen.CAE.QualityAudit.MergedNodesResult | The Quality Audit MergedNodesResult is a class containing information about nodes connecting components |
NXOpen.CAE.QualityAudit.MeshLevelFailedElementCreationResult | The Quality Audit MeshLevelFailedElementCreationResult is a class containing information about failed element creations on universal connections |
NXOpen.CAE.QualityAudit.MeshLevelFailedProjectionResult | The Quality Audit MeshLevelFailedProjectionResult is a class containing information about failed projections on universal connections |
NXOpen.CAE.QualityAudit.MeshLevelFailedProjectionToleranceResult | The Quality Audit MeshLevelFailedProjectionToleranceResult is a class containing information about mesh projections that failed the tolerance criteria |
NXOpen.CAE.QualityAudit.ObjectLevelCorrectedProjectionResult | The Quality Audit ObjectLevelCorrectedProjectionResult is a class containing information about corrected projections on universal connections |
NXOpen.CAE.QualityAudit.ObjectLevelFailedProjectionResult | The Quality Audit ObjectLevelFailedProjectionResult is a class containing information about failed projections on universal connections |
NXOpen.CAE.QualityAudit.ObjectLevelFailedProjectionToleranceResult | The Quality Audit ObjectLevelFailedProjectionToleranceResult is a class containing information about projections that failed the tolerance criteria although the projection itself was successful |
NXOpen.CAE.QueryCurve | Represents a NXOpen.CAE.QueryCurve |
NXOpen.CAE.QueryCurvePost | Represents a NXOpen.CAE.QueryCurvePost Use NXOpen.CAE.ResultManager to create an instance of this class |
NXOpen.CAE.ResponseSimulation.EvaluationSetting | Represents the abstract class of all evaluation setting classes |
NXOpen.CAE.ResponseSimulation.DynamicResultEvaluationSetting | Represents the abstract class of evaluation setting for all dynamic results evaluations |
NXOpen.CAE.ResponseSimulation.PrlResultsEvaluationSetting | Represents the abstract class of evaluation setting for peak value, RMS results and LCR results |
NXOpen.CAE.ResponseSimulation.PeakValueEvaluationSetting | Represents the parameters setting of peak value evaluation |
NXOpen.CAE.ResponseSimulation.RmsResultsEvaluationSetting | Represents the parameters setting for RMS results evaluation in response analysis |
NXOpen.CAE.ResponseSimulation.LcrResultsEvaluationSetting | Represents the parameters setting of LCR results evaluation |
NXOpen.CAE.ResponseSimulation.ResponseResultsEvaluationSetting | Represents the parameters setting for response results evaluation |
NXOpen.CAE.ResponseSimulation.SensorEvaluationSetting | Represents the parameters setting for sensor evaluation |
NXOpen.CAE.ResponseSimulation.StrainGageEvaluationSetting | Represents the parameters setting for strain gage evaluation |
NXOpen.CAE.ResponseSimulation.StrengthResultsEvaluationSetting | Represents parameters setting for strength results evaluation |
NXOpen.CAE.ResponseSimulation.FunctionEvaluationSetting | Represents the abstract class of evaluation setting for function response evaluation |
NXOpen.CAE.ResponseSimulation.CsdEvaluationSetting | Represents the class of evaluation setting for CSD |
NXOpen.CAE.ResponseSimulation.ElementalFunctionEvaluationSetting | Represents the parameters setting for elemental function evaluation |
NXOpen.CAE.ResponseSimulation.ModalResultsEvaluationSetting | Represents the abstract class of evaluation setting for FRF and transmissibility |
NXOpen.CAE.ResponseSimulation.FrfEvaluationSetting | Represents the parameters setting for FRF results evaluation |
NXOpen.CAE.ResponseSimulation.TransmissibilityEvaluationSetting | Represents parameters setting for transmissibility evaluation |
NXOpen.CAE.ResponseSimulation.NodalFunctionEvaluationSetting | Represents the parameters setting of nodal function response evaluation |
NXOpen.CAE.ResponseSimulation.Excitation | Represents the abstract class of dynamic excitations |
NXOpen.CAE.ResponseSimulation.CSDExcitation | Represents an CSD excitation |
NXOpen.CAE.ResponseSimulation.DDAMExcitation | Represents an DDAM excitation |
NXOpen.CAE.ResponseSimulation.RotationalDDAMExcitation | Represents an DDAM excitation |
NXOpen.CAE.ResponseSimulation.TranslationalDDAMExcitation | Represents an DDAM excitation |
NXOpen.CAE.ResponseSimulation.DistributedLoadExcitation | Represents an excitation of distributed-load type |
NXOpen.CAE.ResponseSimulation.NodalFunctionExcitation | Represents the abstract class of nodal function excitation |
NXOpen.CAE.ResponseSimulation.RotationalNodalFunctionExcitation | Represents a rotational nodal function excitation |
NXOpen.CAE.ResponseSimulation.TranslationalNodalFunctionExcitation | Represents a translational nodal function excitation |
NXOpen.CAE.ResponseSimulation.StaticLoadExcitation | Represents an excitation of static load type |
NXOpen.CAE.ResponseSimulation.VelocityImpactExcitation | Represents a velocity impact excitation |
NXOpen.CAE.ResponseSimulation.InitialConditions | Represents the initial condition setting of transient event |
NXOpen.CAE.ResponseSimulation.ModalProperties | Represents the modal presentation of a response analysis meta solution |
NXOpen.CAE.ResponseSimulation.ModeInitialData | Represents the initial setting for a normal mode |
NXOpen.CAE.ResponseSimulation.NormalMode | Represents the properties of one normal mode |
NXOpen.CAE.ResponseSimulation.RSDisplayObject | Represents a BC display attributes |
NXOpen.CAE.ResponseSimulation.RSEvent | Represents a response analysis event |
NXOpen.CAE.ResponseSimulation.Solution | Represents a meta solution providing response analysis functionalities in the |
NXOpen.CAE.Result | |
NXOpen.CAE.ImportedResult | Represents analysis results for a imported solver results file |
NXOpen.CAE.MappedResult | Represents analysis results for a imported solver results file |
NXOpen.CAE.SolutionResult | Represents analysis results for a given NXOpen.CAE.SimSolution |
NXOpen.CAE.SetManager | Represents a group of CAE object sets |
NXOpen.CAE.SignalProcessingPlotData | Exposes the ability to change the Spectrum scaling, correction mode and acoustical weighting applied on a curve displayed in a XY plot |
NXOpen.CAE.SimBCBuilder | This is a manager to the CAE.SimBC class |
NXOpen.CAE.SimGroupContainer | Represents UGS::CaeSim::LbcGroupContainer |
NXOpen.CAE.SimSolution | Represents a solution in the |
NXOpen.CAE.SimSolutionStep | Represents a subcase/step in a solution |
NXOpen.CAE.SimLbcFolder | Represents a folder object in the .sim files |
NXOpen.CAE.SimRecipe | This is an abstract class |
NXOpen.CAE.SimAutoBcRecipe | Represents a simulation recipe containing the parameters needed for the generation of a set of face pairs from the faces/bodies in the model |
NXOpen.CAE.SimSimulation | This is the root object in a .sim file |
NXOpen.CAE.SketchCurves | Represents a Beam Cross Section |
NXOpen.CAE.SolverAppendOption | This class provides access to the append option setting for importing solver specific data into existing Fem/Sim |
NXOpen.CAE.Xyplot.BaseModel | Represents an abstract component object on a XY graphing |
NXOpen.CAE.Xyplot.BaseTemplateManager | Manages the graph template |
NXOpen.CAM.CAMAttribute | Represents a CAM Feature Attribute |
NXOpen.CAM.CAMObject | Represents interface for all CAM Object |
NXOpen.CAM.CAMSetup | cam setup |
NXOpen.CAM.InspectionSetup | Inspection setup |
NXOpen.CAM.Move | Represents a Move |
NXOpen.CAM.InspectionMoveSubop | Represents CMM Inspection Move |
NXOpen.CAM.ManualMove | Represents Manual Move |
NXOpen.CAM.NCGroup | Represents a NC group |
NXOpen.CAM.FeatureGeometry | Represents a Base Geometry Group |
NXOpen.CAM.FeatureGeometryGroup | Represents a CAM Feature Group |
NXOpen.CAM.InspectionGroup | Represents a group for CMM Inspection |
NXOpen.CAM.InspectionTool | Represents an Inspection group |
NXOpen.CAM.Method | Represents a Method Group |
NXOpen.CAM.OrientGeometry | Represents a Orient Group |
NXOpen.CAM.Tool | Represents a NC group |
NXOpen.CAM.Operation | Represents an operation |
NXOpen.CAM.ChamferMilling | Represents a Chamfer Milling Operation |
NXOpen.CAM.CylinderMilling | Represents a Cylinder Milling Operation |
NXOpen.CAM.Documentation | Represents a Documentation operation |
NXOpen.CAM.GenericMotionControl | Represents a Generic Motion Control operation |
NXOpen.CAM.HoleDrilling | Represents a Hole Drilling Operation |
NXOpen.CAM.HoleMaking | Represents a Hole Making operation |
NXOpen.CAM.InspectionOperation | Represents an Inspection operation |
NXOpen.CAM.LatheMachineControl | Represents a Lathe Machine Control operation |
NXOpen.CAM.ManualControl | Represents a ManualControl operation |
NXOpen.CAM.MillMachineControl | Represents a Mill Machine Control operation |
NXOpen.CAM.MillOperation | Represents a Mill operation |
NXOpen.CAM.PlanarOperation | Represents a Planar operation |
NXOpen.CAM.CavityMilling | Represents a Cavity Milling Operation |
NXOpen.CAM.FaceMilling | Represents a Face Milling Operation |
NXOpen.CAM.VolumeBased25DMillingOperation | Represents a Floor Wall Milling Operation |
NXOpen.CAM.GrooveMilling | Represents a Groove Milling Operation |
NXOpen.CAM.FeatureMilling | Represents a Feature Milling Operation |
NXOpen.CAM.PlanarMilling | Represents a Planar Milling Operation |
NXOpen.CAM.Engraving | Represents a Engraving Operation |
NXOpen.CAM.PlungeMilling | Represents a Plunge Milling Operation |
NXOpen.CAM.VariableZLevelMilling | Represents a Variable Z Level Milling Operation |
NXOpen.CAM.ZLevelMilling | Represents a Z Level Milling Operation |
NXOpen.CAM.SurfaceContour | Represents a Surface Contour operation |
NXOpen.CAM.MillToolProbing | Represents a Mill Tool operation |
NXOpen.CAM.RadialGrooveMilling | Represents a Radial Groove Milling Operation |
NXOpen.CAM.ThreadMilling | Represents a Thread Milling Operation |
NXOpen.CAM.TurningOperation | Represents a Turning operation |
NXOpen.CAM.CenterlineDrillTurning | Represents a Centerline Drill Turning operation |
NXOpen.CAM.RoughFinishTurning | Represents a Turn Rough Finish operation |
NXOpen.CAM.FinishTurning | Represents a Turn Finishing operation |
NXOpen.CAM.RoughTurning | Represents a Turn Rough operation |
NXOpen.CAM.TeachmodeTurning | Represents a Turning Teachmode operation |
NXOpen.CAM.ThreadTurning | Represents a Thread Turning operation |
NXOpen.CAM.TurnPartProbing | Represents a Turn Part Probing operation |
NXOpen.CAM.TurnToolProbing | Represents a Turn tool operation |
NXOpen.CAM.UserDefinedOpr | Represents a User Defined operation |
NXOpen.CAM.LatheUserDefined | Represents a Lathe User Defined operation |
NXOpen.CAM.MillUserDefined | Represents a Mill User Defined operation |
NXOpen.CAM.WedmUserDefined | Represents a User Defined WEDM operation |
NXOpen.CAM.WedmMachineControl | Represents a WEDM Machine Control operation |
NXOpen.CAM.TrackPoint | Represents an Track Point |
NXOpen.CAM.SolidTrackPoint | Represents an Track Point |
NXOpen.CAM.ProbeTrackPoint | Represents an Track Point |
NXOpen.CAM.FBM.Feature | Interface for CAM Feature objects |
NXOpen.CAM.InPathEventDataBuilder | Represents a InPath Event Data Builder |
NXOpen.CAM.TabPointDataBuilder | Represents a Tab Point Builder |
NXOpen.CollaborativeDesign | A collaborative design is created in Teamcenter |
NXOpen.ContentDefinition | Represents a class that defines the contents that will be pulled in to a subset |
NXOpen.Decal | Represents a Material Texture decal pair |
NXOpen.Diagramming.SheetBordersAndZones | Represents Sheet Borders and Zones |
NXOpen.Diagramming.TitleBlock | Represents a NXOpen.Diagramming.TitleBlock |
NXOpen.DiagrammingLibraryAuthor.AttributeHolder | Represents a NXOpen.DiagrammingLibraryAuthor.AttributeHolder |
NXOpen.Die.DieAssistantFlangeProfile | Represents a NXOpen.Die.DieAssistantFlangeProfile |
NXOpen.Die.DieAssistantTrimProfile | Represents a NXOpen.Die.DieAssistantTrimProfile |
NXOpen.Die.PierceItemBuilder | Represents a NXOpen.Die.PierceItemBuilder |
NXOpen.Display.Camera | Represents a camera |
NXOpen.Display.DynamicSection | Represents a dynamic section |
NXOpen.Display.DynamicSectionCut | Represents a dynamic section-cut generated by sectioning an object such as a NXOpen.IBody or a NXOpen.Assemblies.Component |
NXOpen.Display.ImageData | Represents a NXOpen.Display.ImageData that stores the contents of a previously imported image file in the part |
NXOpen.Display.TrueShading | Represents a True Shading object |
NXOpen.Display.TrueStudio | Represents a True Shading object |
NXOpen.DisplayableObject | Base class for all objects that are displayable |
NXOpen.DMU.Snapshot | Represents the NXOpen.DMU.Snapshot object |
NXOpen.DMU.SnapshotCollection | Represents the collection object for all snapshot in a part |
NXOpen.Drawings.BordersAndZones | Represents Borders and Zones |
NXOpen.Drawings.DrawingSheet | Represents a drawing sheet |
NXOpen.Drawings.DraftingDrawingSheet | Represents a drafting drawing sheet |
NXOpen.Layout2d.LayoutDrawingSheet | Represents a Layout drawing sheet |
NXOpen.LineDesigner.InsertSheet | Represents an insert sheet |
NXOpen.Drawings.RenderSet | Represents a RenderSet |
NXOpen.Drawings.ViewAlignment | View Alignment object |
NXOpen.Drawings.ViewBreak | ViewBreak - defines the portion of a view that gets hidden to produce a broken view |
NXOpen.Expression | Represents an expression |
NXOpen.ExpressionCollectorSet | An object that binds an expression with an entity section in the context of a list |
NXOpen.GeometricUtilities.FaceSetOffset | This class represents a face set (collector) offset data |
NXOpen.GeometricUtilities.TwoExpressionsCollectorSet | Represents a two dimension list item builder |
NXOpen.ExpressionGroup | Represents an expression group |
NXOpen.ExpressionSectionSet | An object that binds an expression with an entity section in the context of a list |
NXOpen.GeometricUtilities.TwoExpressionsSectionSet | Represents a two dimension list section item builder |
NXOpen.FacetCollector | Represents collection of facets |
NXOpen.Features.Feature | Represents a feature on a part |
NXOpen.Features.PointSetFacePercentageBuilder | Represents a NXOpen.Features.PointSetFacePercentageBuilder |
NXOpen.Features.SectionEdit | Represents a section edit feature |
NXOpen.Features.SheetMetal.FlexibleCableSegment | Represents a Flexible Cable Segment class |
NXOpen.Features.ShipDesign.BulkHeadListItemBuilder | Represents a NXOpen.Features.ShipDesign.BulkHeadListItemBuilder |
NXOpen.Features.ShipDesign.DeckListItemBuilder | Represents a DeckListItemBuilder |
NXOpen.Features.ShipDesign.ItFrameListItemBuilder | Represents a NXOpen.Features.ShipDesign.ItFrameListItemBuilder |
NXOpen.Features.ShipDesign.PlanePairBuilder | This class is used to define a pair of planes in a list |
NXOpen.Features.ShipDesign.PointPairBuilder | This class is used to define a pair of points in a list |
NXOpen.Features.ShipDesign.SeamBlockBuilder | Represents a NXOpen.Features.ShipDesign.SeamBlockBuilder |
NXOpen.Features.ShipDesign.TransFrameListItemBuilder | Represents a NXOpen.Features.ShipDesign.TransFrameListItemBuilder |
NXOpen.Fields.ComplexScalarFieldWrapper | This class defines a complex value that is internally backed up by a field or two expressions |
NXOpen.Fields.ComplexVectorFieldWrapper | This class defines a complex value that is internally backed up by a field or six expressions |
NXOpen.Fields.FieldDomain | Represents the Field Domains |
NXOpen.Fields.FieldManager | Represents the manager class of the Fields |
NXOpen.Fields.FieldVariable | Represents the Field Variables |
NXOpen.Fields.FieldWrapper | This class defines a value that is internally backed up by a field |
NXOpen.Fields.NameVariable | This class stores the common name and measure for field variables |
NXOpen.CAE.ResultVariable | Controls Result Exp Object |
NXOpen.Fields.ScalarFieldWrapper | This class defines a scalar value that is internally backed up by a (optionally scaled) field or an expression |
NXOpen.Fields.SpatialMap | Represents the Field Domain Map |
NXOpen.Fields.VectorFieldWrapper | This class defines a vector value that is internally backed up by a (optionally scaled) field or three expressions |
NXOpen.GeometricUtilities.FaceSetData | Represents a NXOpen.GeometricUtilities.FaceSetData |
NXOpen.GeometricUtilities.SecondarySectionData | Represents a NXOpen.GeometricUtilities.SecondarySectionData |
NXOpen.GeometricUtilities.SelectionList | Represents a NXOpen.GeometricUtilities.SelectionList |
NXOpen.GeometricUtilities.StyledSweepDoubleOnPathDimBuilder | Represents a NXOpen.GeometricUtilities.StyledSweepDoubleOnPathDimBuilder |
NXOpen.GeometricUtilities.WaveLinkRepository | Represents a NXOpen.GeometricUtilities.WaveLinkRepository |
NXOpen.IFacet | Represents a facet |
NXOpen.ConvergentFacet | Represents a facet from convergent topology |
NXOpen.NxFacet | Represents a facet from convergent topology |
NXOpen.Issue.IssueAttachment | Represents the Issue Attachment object |
NXOpen.Features.ShipDesign.PenetrationAttachment | Represents the Penetration Attachment object |
NXOpen.Issue.IssueContent | Represents the Issue Issue object |
NXOpen.Features.ShipDesign.PenetrationRequest | Represents the Penetration Request object |
NXOpen.Issue.IssueFolder | Represents the Issue Folder object |
NXOpen.Features.ShipDesign.PenetrationFolder | Represents the Penetration Folder object |
NXOpen.Issue.IssueList | Represents the Issue List object |
NXOpen.Features.ShipDesign.PenetrationList | Represents the Penetration List object |
NXOpen.Issue.IssueBriefcase | Represents the Issue Briefcase object |
NXOpen.Issue.IssueProperty | Represents the Issue Property object |
NXOpen.Issue.IssueSite | Represents the Issue Site object |
NXOpen.Features.ShipDesign.PenetrationSite | Represents the Penetration Site object |
NXOpen.Layer.Category | Represents a layer category |
NXOpen.Layout | Represents a layout |
NXOpen.Layout2d.ComponentDefinition | Represents a component definition |
NXOpen.Layout2d.LocalDefinitionFolder | Represents a local definition folder |
NXOpen.Light | Represents a light source |
NXOpen.LineDesigner.DBNode | Represents DB node |
NXOpen.LineDesigner.DBFactoryNode | Represents DB factory node |
NXOpen.LineDesigner.DBSmartEquipmentNode | Represents DB factory node |
NXOpen.LineDesigner.DBSmartComplexEquipmentNode | Represents DB factory node |
NXOpen.LineDesigner.DBColumnGridNode | Represents DB column grid node |
NXOpen.LineDesigner.DBConveyorNode | Represents DB conveyor node |
NXOpen.LineDesigner.DBFactoryCadGeoNode | Represents DB import factory cad geo node |
NXOpen.LineDesigner.DBFenceNode | Represents DB factory node |
NXOpen.LineDesigner.DBFloorEquipmentNode | Represents DB Floor equipment node |
NXOpen.LineDesigner.DBNodeContainer | Represents DB node container |
NXOpen.LineDesigner.DBPlatformEquipmentNode | Represents DB platform equipment node |
NXOpen.LineDesigner.DBStairwayEquipmentNode | Represents DB stairway equipment node |
NXOpen.LineDesigner.ExportPlantToDWG | Represents the export plant to dwg |
NXOpen.LineDesigner.LineDesignerApplicationBuilder | Represents a class to create enter and exit the LineDesigner application |
NXOpen.LineDesigner.ModelBaseObject | Represents Model Base Object |
NXOpen.LineDesigner.ModelProductionUnit | Represents Production Unit |
NXOpen.LineDesigner.ModelResourceInstance | Represents Resource Instance |
NXOpen.LineDesigner.ModelPlantRoot | Represents a manager of line designer plant model |
NXOpen.LineDesigner.ReuseLibraryDragData | Represents a manager of line designer plant model |
NXOpen.Material | Represents Material |
NXOpen.PhysicalMaterial | Represents Physical Material |
NXOpen.Mechatronics.AdapterFormula | Represents the Adapter Formula class |
NXOpen.Mechatronics.AlignBody | Represents the Align Body |
NXOpen.Mechatronics.CamProfile | Represents the CamProfile class |
NXOpen.Mechatronics.CollisionMaterial | Represents the Collision Material class |
NXOpen.Mechatronics.DynamicObjectTable | Represents the DynamicObjectTable class |
NXOpen.Mechatronics.ElectricalPart | Electrical Part holds the part attributes for communicating with EPLAN |
NXOpen.Mechatronics.ExpressionBlockFormula | Represents the ExpressionBlockFormula class |
NXOpen.Mechatronics.ExpressionBlockObject | Represents the ExpressionBlockObject class |
NXOpen.Mechatronics.ExternalConnectionElement | Represents the External Connection Element class |
NXOpen.Mechatronics.ExternalSignalConfigurationObject | Represents a NXOpen.Mechatronics.ExternalSignalConfigurationObject |
NXOpen.Mechatronics.GanttLinker | Represents the Gantt Linker class |
NXOpen.Mechatronics.GanttOperationObject | Represents the Gantt Operation object |
NXOpen.Mechatronics.MCDSignalServerConfigurationObject | Represents a NXOpen.Mechatronics.MCDSignalServerConfigurationObject |
NXOpen.Mechatronics.MotionProfile | Represents the MotionProfile class |
NXOpen.Mechatronics.PhysicsPreference | Represents the Physics Preference class |
NXOpen.Mechatronics.PMNavFolderLocator | Represents the PMNav Folder Locator |
NXOpen.Mechatronics.PMNavFolderObject | Represents the PMNav Folder object |
NXOpen.Mechatronics.ProxyOverrideObject | Represents the Proxy Override Object class |
NXOpen.Mechatronics.ReadWriteDeviceObject | Represents the ReadWriteDeviceObject class |
NXOpen.Mechatronics.RuntimeBehavior | Represents the Runtime Behavior class |
NXOpen.Mechatronics.RuntimeFormula | Represents the Runtime Formula class |
NXOpen.Mechatronics.RuntimeFormulaParameter | Represents the Runtime Formula Parameter class |
NXOpen.Mechatronics.RuntimeNCObject | Represents the RuntimeNCObject class |
NXOpen.Mechatronics.Signal | Represents the Signal class |
NXOpen.Mechatronics.SymbolTable | Represents the SymbolTable class |
NXOpen.Mechatronics.SystemObject | Represents the System Object |
NXOpen.Mechatronics.FunctionObject | Represents the Function object |
NXOpen.Mechatronics.LogicObject | Represents the Logic Object class |
NXOpen.Mechatronics.Requirement | Represents the Requirement class |
NXOpen.Mechatronics.SystemRoot | Represents the System Root class |
NXOpen.Mechatronics.TagFormObject | Represents the TagFormObject class |
NXOpen.Mechatronics.TagTableObject | Represents the TagTableObject class |
NXOpen.Mfg.AM.BuildTray | Interface for Model Build Tray objects |
NXOpen.Mfg.AM.Part | Interface for Model Part objects |
NXOpen.Mfg.AM.Profile | Interface for Services Profile objects |
NXOpen.Mfg.AM.ProfileLibrary | Interface for Services Profile Library objects |
NXOpen.Mfg.AM.Support | Interface for Model Support objects |
NXOpen.MfgModel.ModelDynamicIPA | Represents Dynamic IPA Instance |
NXOpen.MfgModel.ModelStaticIPA | Represents Static IPA Instance |
NXOpen.Motion.BodyContactAdams | Represents a NXOpen.Motion.BodyContactAdams |
NXOpen.Motion.BodyContactLms | Represents a NXOpen.Motion.BodyContactLms |
NXOpen.Motion.BodyContactRecurdyn | Represents a NXOpen.Motion.BodyContactRecurdyn |
NXOpen.Motion.BodyContactSphereToCAD | Represents a NXOpen.Motion.BodyContactSphereToCAD |
NXOpen.Motion.CurveContactAdams | Represents a NXOpen.Motion.CurveContactAdams |
NXOpen.Motion.CurveContactRecurdyn | Represents a NXOpen.Motion.CurveContactRecurdyn |
NXOpen.Motion.Graph | Represents a graph, only creation is supported |
NXOpen.Motion.GraphLegendData | Represents a motion graph legend data |
NXOpen.Motion.LoadTransferControl | Represents the NXOpen.Motion.LoadTransferControl |
NXOpen.Motion.MotionSolution | Represents a solution |
NXOpen.Motion.AdvancedSolution | Represents a Motion.AdvancedSolution |
NXOpen.Motion.NormalModeProperty | Represents the properties of one normal mode |
NXOpen.Motion.Packaging | This class is an abstract class and base class for NXOpen.Motion.PackagingMeasure , NXOpen.Motion.PackagingTrace and NXOpen.Motion.PackagingInterference objects |
NXOpen.Motion.PackagingInterference | This class represents a Packaging Interference object |
NXOpen.Motion.PackagingMeasure | This class represents a Packaging Measure object |
NXOpen.Motion.PackagingTrace | This class represents a Packaging Trace object |
NXOpen.Motion.PlantInput | Represents a Plant Input motion object |
NXOpen.Motion.PlantOutput | Represents a Plant Output motion object |
NXOpen.Motion.PostControl | Represent abstract class Motion |
NXOpen.Motion.AnimationControl | Represents the NXOpen.Motion.AnimationControl |
NXOpen.Motion.ArticulationControl | Represents the NXOpen.Motion.ArticulationControl |
NXOpen.Motion.SpreadsheetRunControl | Represents the NXOpen.Motion.SpreadsheetRunControl |
NXOpen.Motion.PostToolsControl | Represent abstract class Motion |
NXOpen.Motion.Segment | Represents a segment, only creation is supported |
NXOpen.Motion.SignalChart | Represents a motion Signal Chart object |
NXOpen.NXMatrix | Represents an NX matrix |
NXOpen.PartFamily.FamilyAttribute | This class represents a part family attribute |
NXOpen.PartFamily.Template | This class represents a part family template |
NXOpen.PDM.AttributeGroup | Represents an attribute group |
NXOpen.PDM.AttributeGroupDescription | Represents an attribute group type |
NXOpen.PDM.DBEntityProxy | JA class for the DBEntityProxy object |
NXOpen.PDM.EffectivityTableRow | Represents the class that contains effectivity parameters |
NXOpen.PDM.GenericObjectAttributeHolder | Represents the class that contains database business logic or pre-creation information for the objects |
NXOpen.PDM.LogicalObject | Represents the class that contains database business logic or pre-creation information for the objects |
NXOpen.PDM.NativePartLogicalObject | Represents the class that contains information for the objects participating in import operation |
NXOpen.PDM.ModelElement | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PDM.ModelElementRevision | Represents a base class that provides common methods for various model elements in a NXOpen.CollaborativeDesign |
NXOpen.PDM.OrderedElementGroup | Represents a base class that provides common methods for ordered elements group in a NXOpen.PDM.ElementGroup |
NXOpen.PDM.PartCreationObject | This class is a proxy for a to-be-created part prior to the part being created |
NXOpen.PDM.PortArtifact | Represents a base class that provides common methods for port artifact in a NXOpen.PDM.LogicalElementRevision |
NXOpen.PID.Port | Represents the port class |
NXOpen.PDM.SmartSaveObject | Represents the class for object participating in the smart save operation |
NXOpen.PID.FlowDirectionArrow | A symbol that indicates the direction the of the flow |
NXOpen.Placement.PlacementSolution | This class represents the placement solution |
NXOpen.PlotColorsWidthsBuilder | Represents a NXOpen.PlotColorsWidthsBuilder to be used for plotting |
NXOpen.PlotSourceBuilder | Represents a NXOpen.PlotSourceBuilder |
NXOpen.Positioning.ComponentConstraintGroup | Constraint group which represents a group of component constraints in NX |
NXOpen.Positioning.Constraint | Constraints for use in positioning objects in NX |
NXOpen.Positioning.ComponentConstraint | Constraint for use in positioning assembly objects in NX |
NXOpen.Positioning.ConstraintReference | ConstraintReference for use in positioning objects in NX |
NXOpen.Positioning.Network | Network for use in positioning objects in NX |
NXOpen.Positioning.ComponentNetwork | Network for use in positioning components in NX |
NXOpen.Positioning.Positioner | An instance of this class can be used to create NXOpen.Positioning.Constraint s and associated objects |
NXOpen.Positioning.ComponentPositioner | An instance of this class can be used to create NXOpen.Positioning.Constraint s and associated objects |
NXOpen.PositioningDimension | Represents a dimension object attached to the feature |
NXOpen.Preferences.WorkPlane | Represents the set of WorkPlanePreferences preferences applicable to part |
NXOpen.PressLineSimulation.CushionControl | Represents a linear cam used in a press line simulation |
NXOpen.PressLineSimulation.HydraulicLifter | Represents a hydraulic lifter used in a press line simulation |
NXOpen.PressLineSimulation.LinearCam | Represents a linear cam used in a press line simulation |
NXOpen.PressLineSimulation.RotaryCam | Represents a rotary cam used in a press line simulation |
NXOpen.PressLineSimulation.UserMotion | Represents a user defined motion used in a press line simulation |
NXOpen.RegionPoint | Represents a point and body context on a region point |
NXOpen.Report.BaseItem | Represents an abstract report item |
NXOpen.Report.TemplateItem | Represents a template item object |
NXOpen.Report.TextItem | Represents a text item |
NXOpen.Report.UserTextItem | Represents a user text item |
NXOpen.Report.Command | Represents a command in command library |
NXOpen.Report.ImagesGroupItem | Represents a images group item |
NXOpen.Report.UserImagesGroupItem | Represents a user images group item |
NXOpen.Report.Report | Represents a report |
NXOpen.Report.ReportImage | Represents a report image |
NXOpen.Routing.AttributeHolder | Represents a NXOpen.Routing.AttributeHolder |
NXOpen.Routing.BuiltInPath | The Routing BuiltInPath object stores a set of curves |
NXOpen.Routing.Corner | The Routing Corner is the abstract parent class of all other corner objects |
NXOpen.Routing.BendCorner | Computes a fillet curve between two linear segments to form a smooth bend transition from one segment to another |
NXOpen.Routing.CopeCorner | The cope corner is a corner that trims stocks at a junction |
NXOpen.Routing.DiscontinuityCorner | A discontinuity corner is a corner that forces Routing.Stock objects to split as they cover the segments attached to the discontinuity corner |
NXOpen.Routing.MiterCorner | This class defines a mitered corner |
NXOpen.Routing.MiteredBendCorner | Computes a fillet curve between two linear segments to form a smooth bend transition from one segment to another that represents a mitered bend |
NXOpen.Routing.CrossSection | A NXOpen.Routing.CrossSection defines a profile to sweep for NXOpen.Routing.Stock objects |
NXOpen.Routing.DesignRule | Represents NXOpen.Routing.DesignRule object |
NXOpen.Routing.DesignRuleOverride | Represents Routing DesignRuleOverride object |
NXOpen.Routing.DesignRuleViolation | Represents NXOpen.Routing.DesignRuleViolation object |
NXOpen.Routing.DesignRuleViolationLocation | Represents NXOpen.Routing.DesignRuleViolationLocation object |
NXOpen.Routing.Division | Represents NXOpen.Routing.Division |
NXOpen.Routing.Electrical.CablewaysLayoutView | Represents the CablewaysLayoutView class |
NXOpen.Routing.FittingOverstock | The NXOpen.Routing.FittingOverstock object represents overstock applied over the faces of the routing parts |
NXOpen.Routing.OffsetPath | The Routing OffsetPath object is the set of information needed to define an offset route |
NXOpen.Routing.OverstockApplication | Represents a collection of NXOpen.Routing.OverstockApplication objects |
NXOpen.Routing.Path | The Routing Path object is the set of ordered continuous segments |
NXOpen.Routing.Platform | NXOpen.Routing.Platform objects are automatically created and updated by NXOpen.Routing.Platform objects |
NXOpen.Routing.PortConnection | The Routing PortConnection object is used by Routing to position ports while placing parts |
NXOpen.Routing.RootObject | |
NXOpen.Routing.ObjectRelationship | Represents a relationship between Routing objects |
NXOpen.Routing.DeviceRelationship | Represents a relationship between NXOpen.Routing.SingleDevice objects |
NXOpen.Routing.Electrical.ElectricalDeviceRelationship | Represents a relationship between Routing Electrical devices |
NXOpen.Routing.InterfaceTerminalRelationshipBase | The abstract class NXOpen.Routing.InterfaceTerminalRelationshipBase relates many NXOpen.Routing.Port s to one NXOpen.Routing.Port |
NXOpen.Routing.InterfaceTerminalRelationshipShadow | Represents an assembly shadow of NXOpen.Routing.InterfaceTerminalRelationshipBase |
NXOpen.Routing.RouteObject | The Top level routing data model object |
NXOpen.Routing.ConnectivityDefinition | The base class for various connection objects |
NXOpen.Routing.LogicalConnection | Represents a connection between mutiple From and To Routing.LogicalTerminal |
NXOpen.Routing.Electrical.Connection | The electrical usage of a NXOpen.Routing.LogicalConnection , restricted to one From and one To terminal |
NXOpen.Routing.Electrical.CableConnection | Connection used by a NXOpen.Routing.Electrical.CableDevice |
NXOpen.Routing.Electrical.NonPathConnection | Describes a connection that does not have a path |
NXOpen.Routing.Electrical.PathConnection | Describes a connection that has a path |
NXOpen.Routing.Electrical.JumperConnection | A jumper connection connects ports on the same connector |
NXOpen.Routing.InterfaceTerminalBase | The NXOpen.Routing.InterfaceTerminalBase corresponds to an abstract class for a prototype NXOpen.Routing.Port |
NXOpen.Routing.InterfaceTerminalShadow | Represents the defining data for a physical NXOpen.Routing.Port |
NXOpen.Routing.ItemDefinition | NXOpen.Routing.ItemDefinition object corresponds to DDID in AP212 and to a piece part or routing stock in NX |
NXOpen.Routing.AssemblyDefinition | Represents a collection of NXOpen.Routing.SingleDevice objects that are used in an assembled product |
NXOpen.Routing.Electrical.CableDefinition | Holds the collection of wires in a NXOpen.Routing.Electrical.CableDevice |
NXOpen.Routing.Electrical.ShieldDefinition | Represents Routing Electrical ShieldDefinition object |
NXOpen.Routing.Electrical.HarnessDefinition | Represents a NXOpen.Routing.Electrical.HarnessDefinition |
NXOpen.Routing.Electrical.SystemDefinition | Represents a NXOpen.Routing.Electrical.SystemDefinition |
NXOpen.Routing.PartDefinitionBase | |
NXOpen.Routing.PartDefinitionShadow | |
NXOpen.Routing.Electrical.ElectricalPartDefinitionShadow | Represents NXOpen.Routing.Electrical.ElectricalPartDefinitionShadow object |
NXOpen.Routing.StockDefinition | Represents Routing StockDefinition object |
NXOpen.Routing.Electrical.ElectricalStockDefinition | Represents NXOpen.Routing.Electrical.ElectricalStockDefinition object |
NXOpen.Routing.Electrical.CableStockDefinition | Describes a cable's stock |
NXOpen.Routing.Electrical.ShieldStockDefinition | Represents Routing Electrical ShieldStockDefinition object |
NXOpen.Routing.LogicalTerminal | Assembly instance of a NXOpen.Routing.InterfaceTerminalBase |
NXOpen.Routing.SingleDevice | The Routing SingleDevice corresponds to an abstract instance of NXOpen.Routing.ItemDefinition |
NXOpen.Routing.Electrical.ConnectorDevice | The Electrical ConnectorDevice corresponds to a connector instance of NXOpen.Routing.SingleDevice |
NXOpen.Routing.Electrical.HarnessDevice | The Electrical HarnessDevice corresponds to a harness instance of the Routing.SingleDevice |
NXOpen.Routing.Electrical.SystemDevice | The Electrical SystemDevice corresponds to a system instance of the NXOpen.Routing.SingleDevice |
NXOpen.Routing.StockDevice | The Routing StockDevice corresponds to a generic stock instance of Routing.SingleDevice |
NXOpen.Routing.Electrical.ElectricalStockDevice | The Electrical Stock Device is a non instantiable superclass to classify all electrical stock-based single devices |
NXOpen.Routing.Electrical.CableDevice | Corresponds to a cable instance of an NXOpen.Routing.Electrical.ElectricalStockDevice |
NXOpen.Routing.Electrical.ShieldDevice | The Electrical ShieldDevice corresponds to a shield instance of Routing.Electrical.ElectricalStockDevice |
NXOpen.Routing.Electrical.WireDevice | The Electrical WireDevice corresponds to a wire instance of NXOpen.Routing.Electrical.ElectricalStockDevice |
NXOpen.Routing.RouteLogicalAssociation | RouteLogicalAssociation object associates non-electrical components to electrical components |
NXOpen.Routing.RouteSegmentFont | Represents a route segment font |
NXOpen.Routing.RouteSegmentFontElement | Represents a route segment font element |
NXOpen.Routing.RoutingSystem | Routing object is a collection of NXOpen.Routing.Run objects |
NXOpen.Routing.Run | Routing Run object references components and stocks which comprise a piping run |
NXOpen.Routing.SBendCorner | The Routing SBendCorner defines a S-Bend |
NXOpen.Routing.Stock | |
NXOpen.Routing.Filler | Represents a Filler |
NXOpen.Routing.Overstock | Represents an NXOpen.Routing.Overstock object |
NXOpen.Routing.StockTransition | Represents NXOpen.Routing.StockTransition object |
NXOpen.Routing.StockData | A NXOpen.Routing.StockData contains the various profiles, characteristic information, NXOpen.Routing.Anchor and other attributes that define NXOpen.Routing.Stock objects |
NXOpen.Routing.Wire | The Routing Wire object is the set of information needed to define * a ROUTE_wire |
NXOpen.ShipDesign.Navigator | Represents the interface for navigator action classes |
NXOpen.ShipDesign.NavigatorNode | Represents the interface for navigator view classes |
NXOpen.ShipDesign.NavigatorView | Represents the interface for navigator view classes |
NXOpen.ShipDesign.ShipNavigatorRoot | Represents the interface for ship navigator root classes |
NXOpen.SIM.Breakpoint | Represents the Breakpoint class object |
NXOpen.SIM.KinematicAxis | Represents the SimKimAxis class object |
NXOpen.SIM.KinematicComponent | Represents the KinematicComponent class object |
NXOpen.SIM.KinematicConfigurator | Represents the ISV base class object |
NXOpen.SIM.KinematicJunction | Represents the KinematicJunction class object |
NXOpen.SIM.KinematicModel | Represents the Kinematic Model class object |
NXOpen.SIM.NcChannelSelectionData | Represents the NcChannelSelectionData class object |
NXOpen.SIM.NcProgram | Represents the NcProgram class object |
NXOpen.SIM.Snapshot | Represents the Snapshot class object |
NXOpen.SketchPolygon | Represents a polygon constraint in a sketch |
NXOpen.SymbolFont | Represents a symbol font |
NXOpen.ToolDesigner.DBNode | Represents DB node |
NXOpen.ToolDesigner.DBGunTipsNode | Represents DB work set node |
NXOpen.ToolDesigner.DBNodeContainer | Represents Generic DB node container |
NXOpen.ToolDesigner.DBStudyNode | Represents DB work set node |
NXOpen.ToolDesigner.DBWorksetNode | Represents DB work set node |
NXOpen.ToolDesigner.ModelMfgLoader | Represents a manager of tool designer mfg loader |
NXOpen.ToolDesigner.ModelMfgManager | Represents a manager of tool designer mfg manager |
NXOpen.ToolDesigner.ToolDesignerApplicationBuilder | Represents a class to create enter and exit the ToolDesigner application |
NXOpen.Unit | Represents a unit |
NXOpen.UserDefinedTemplate.Instantiation | Represents an User Defined Template Instantiation object |
NXOpen.Validate.Override | Represents a NXOpen.Validate.Override object |
NXOpen.Validate.Requirement | Represents a NXOpen.Validate.Requirement object |
NXOpen.Validate.ResultObject | Represents a check-mate result object |
NXOpen.Validation | Represents an NX NXOpen.Validation object |
NXOpen.Validate.RequirementCheck | Represents an NX NXOpen.Validate.RequirementCheck object |
NXOpen.View | Represents a view |
NXOpen.Drawings.DraftingView | Represents a drafting view |
NXOpen.ModelingView | Represents a Modeling View |
NXOpen.Annotations.LightweightSectionView | Represents a PMI Lightweight Section View |
NXOpen.Annotations.SearchModelView | Represents a search model view |
NXOpen.CutView | Represents a Cut View |
NXOpen.VisualReporting.Classifier | A Classifier within a NXOpen.VisualReporting.Rule |
NXOpen.VisualReporting.Condition | A Condition within a NXOpen.VisualReporting.Rule |
NXOpen.VisualReporting.GroupLabel | A group label corresponds to a group of objects in the results of an applied NXOpen.VisualReporting.VisualReport |
NXOpen.VisualReporting.Property | A property within either a NXOpen.VisualReporting.Rule or a NXOpen.VisualReporting.Condition , or used as referenced property information for the report |
NXOpen.VisualReporting.ResultCategory | A result category within a NXOpen.VisualReporting.VisualReport |
NXOpen.VisualReporting.Rule | A rule within a NXOpen.VisualReporting.VisualReport |
NXOpen.VisualReporting.UnmatchedResultCategory | An unmatched result category within a NXOpen.VisualReporting.VisualReport |
NXOpen.VisualReporting.VisualReport | A visual report can be activated by the NXOpen.VisualReporting.VisualReportManager to apply colors to objects in the graphics window |
NXOpen.Weld.CharacteristicsSelectionBuilder | This builder allows you to define the attribute values to be set on the output of the weld feature |
NXOpen.Weld.CharacteristicsValueBuilder | The object containing the information about the attribute to be placed on the output of the weld feature |
NXOpen.Report.BaseArgument | Represents an abstract command argument |
NXOpen.Report.DoubleArgument | Represents an argument for double type data |
NXOpen.Report.EnumerationArgument | Represents an argument for enumeration type data |
NXOpen.Report.IntegerArgument | Represents an argument for integer type data |
NXOpen.Report.StringArgument | Represents an argument for string type data |
NXOpen.Report.CommandLibrary | Represents a command library in the command manager |
NXOpen.Report.IReportCollection | This interface is used to manage associated reports Report.Report |
NXOpen.CAE.AeroStructures.MarginSolution | Represents a NXOpen.CAE.AeroStructures.MarginSolution |
NXOpen.CAE.SimSolution | Represents a solution in the |
NXOpen.Report.IUserItem | Represents an user defined report item |
NXOpen.Report.UserImagesGroupItem | Represents a user images group item |
NXOpen.Report.UserTextItem | Represents a user text item |
NXOpen.Report.ProgramInformation | Represents the program information for command automation |
NXOpen.Report.UserInput | Represents a user input in command |
NXOpen.Routing.ICharacteristic | Interface for querying and setting characteristic (UG attribute values) on various routing objects |
NXOpen.Assemblies.Component | Represents a component in a NXOpen.Assemblies.ComponentAssembly |
NXOpen.Routing.BuiltInPath | The Routing BuiltInPath object stores a set of curves |
NXOpen.Routing.CrossSection | A NXOpen.Routing.CrossSection defines a profile to sweep for NXOpen.Routing.Stock objects |
NXOpen.Routing.FittingOverstock | The NXOpen.Routing.FittingOverstock object represents overstock applied over the faces of the routing parts |
NXOpen.Routing.IRoutePosition | Interface class for all routing objects that specify a single (possibly associative) location in space |
NXOpen.Routing.Anchor | A Routing Anchor defines a position in a Qualified Routing component part |
NXOpen.Routing.ControlPoint | Routing Control Points define a position in space, and are used to determine connections from segments to segments, and segments to ports |
NXOpen.Routing.IAxisPort | Interface class for all routing objects that specify a direction |
NXOpen.Routing.FittingPort | Represents a Routing Fitting Port ObjectNXOpen.Routing.FittingPort |
NXOpen.Routing.FixturePort | NXOpen.Routing.FixturePort objects are objects that * segments are routed through when creating a routing path |
NXOpen.Routing.MultiPort | Represents a NXOpen.Routing.MultiPort |
NXOpen.Routing.ProxyPort | A NXOpen.Routing.ProxyPort is a port that represents a connector in another design zone, but not present in this design zone |
NXOpen.Routing.TerminalPort | |
NXOpen.Routing.Port | Routing Port Object is a parent class for FixturePort, ExtractPort, FittingPort, Multiport, StockPort and TerminalPort |
NXOpen.Routing.ISegment | Interface class for all routing segments [Line/Arc/Spline] |
NXOpen.Routing.ArcSegment | Represents a arc segment |
NXOpen.Routing.GapArcSegment | Represents a gap arc segment |
NXOpen.Routing.LineSegment | Represents a line segment |
NXOpen.Routing.SplineSegment | Represents a spline segment |
NXOpen.Routing.RouteObject | The Top level routing data model object |
NXOpen.Routing.Stock | |
NXOpen.Routing.StockData | A NXOpen.Routing.StockData contains the various profiles, characteristic information, NXOpen.Routing.Anchor and other attributes that define NXOpen.Routing.Stock objects |
NXOpen.Routing.IPath | The Routing IPath object is a list of segments in a route |
NXOpen.Routing.OffsetPath | The Routing OffsetPath object is the set of information needed to define an offset route |
NXOpen.Routing.Path | The Routing Path object is the set of ordered continuous segments |
NXOpen.Routing.Wire | The Routing Wire object is the set of information needed to define * a ROUTE_wire |
NXOpen.Weld.IFeature | Represents a Weld Assistant or Structure Welding created feature |
NXOpen.Weld.Fill | Represents a Weld Fill feature |
NXOpen.Weld.Fillet | Represents a Weld Fillet Feature |
NXOpen.Weld.Groove | Represents a WeldGroove feature |
NXOpen.Weld.Jointmark | Represents a Weld Jointmark Feature |
NXOpen.Weld.JointmarkElement | Represents a Weld |
NXOpen.Weld.PlugSlot | create a PlugSlot feature for Weld |
NXOpen.Weld.PointMark | Represents a Weld PointMark Feature |
NXOpen.Weld.PointMarkPoint | Represents a Weld |
NXOpen.Weld.SurfaceWeld | Represents a surface weld feature |
NXOpen.Weld.Transform | Represents a Weld Transform Feature |
NXOpen.Weld.UserDefinedWeld | Represents a User Defined Weld feature |
NXOpen.Weld.WeldBead | Represents a Weld Bead feature |
NXOpen.Weld.WeldJoint | Represents a weld joint feature |
NXOpen.Preferences.IOrientationViewPreferences | Represents set of IOrientationViewPreferences applicable to drafting views |
NXOpen.Drawings.OrientationViewStyle | Represents set of Orientation View Style Preferences applicable to drafting views |
NXOpen.Preferences.IPerspectiveViewPreferences | Represents set of PerspectiveViewPreferences applicable to drafting views |
NXOpen.Drawings.PerspectiveViewStyle | Represents set of PerspectiveViewStyle applicable to drafting views |
NXOpen.AME.IPort | Represents an IPort |
NXOpen.AME.AMEPort | Represents Port |
NXOpen.AME.AssignmentPort | Represents AssignmentPort |
NXOpen.AME.EPLANPlug | Represents EPLANPlug |
NXOpen.AME.EPLANSocket | Represents EPLANSocket |
NXOpen.AME.IPortsContainer | Represents Ports Container |
NXOpen.Motion.IPostControl | Represents an interface IPostControl |
NXOpen.Motion.PostControl | Represent abstract class Motion |
NXOpen.Motion.PostToolsControl | Represent abstract class Motion |
NXOpen.CAE.IPostScenarioDataSource | This class represents a data source that can be used for a post processing scenario |
NXOpen.CAE.AssyFEModel | This class represents an Assembly Finite Element Model |
NXOpen.CAE.AtvSet | This is the class representing a Atv result set |
NXOpen.CAE.DataProcessing | Represents a NXOpen.CAE.DataProcessing |
NXOpen.CAE.DataProcessingBlock | Represents a NXOpen.CAE.DataProcessingBlock |
NXOpen.CAE.FEModelOccurrence | This class represents a Finite Element Model Occurrence |
NXOpen.CAE.FrfSet | This is the class representing a FRF set |
NXOpen.CAE.ModeSet | This is the class representing a Mode set |
NXOpen.CAE.SimLoadRecipe | This is the class handling the attributes of a load recipe |
NXOpen.CAE.SimResultReference | Represents a Result Reference in the |
NXOpen.CAE.SimSimulationObject | Represents a simulation object |
NXOpen.Mfg.Mlp.IProcess | Interface to the Machining Line Planner process |
NXOpen.Mfg.Mlp.Operation | Represents a Machining Line Planner operation |
NXOpen.Mfg.Mlp.ProcessSetup | Represents a Machining Line Planner process setup |
NXOpen.Preferences.IProjectedViewPreferences | Represents set of ProjectedViewPreferences applicable to drafting views |
NXOpen.Drawings.ProjectedViewStyle | Represents set of Projected View Style Preferences applicable to drafting views |
NXOpen.Preferences.ProjectedViewPreferences | Represents set of Projected View Preferences applicable to drafting views |
NXOpen.Mfg.Mlp.IResource | Interface to the Machining Line Planner resource |
NXOpen.Mfg.Mlp.MachineTool | Represents a Machining Line Planner machine tool |
NXOpen.Mfg.Mlp.ToolAssembly | Represents a Machining Line Planner tool assembly |
NXOpen.Preferences.ISectionViewPreferences | Represents set of SectionViewPreferences applicable to drafting views |
NXOpen.Drawings.SectionViewStyle | Represents set of Section View Style Preferences applicable to drafting views |
NXOpen.Preferences.SectionViewPreferences | Represents set of Section View Preferences applicable to drafting views |
NXOpen.CAE.ModelCheck.ISelectionBuilder | Represents the model check selection builder |
NXOpen.CAE.ModelCheck.DuplicateElementsCheckBuilder | Represents a NXOpen.CAE.ModelCheck.DuplicateElementsCheckBuilder to check for duplicate elements within the candidate elements |
NXOpen.CAE.ModelCheck.DuplicateNodesCheckBuilder | Represents a NXOpen.CAE.ModelCheck.DuplicateNodesCheckBuilder to check for duplicate nodes within the candidate nodes |
NXOpen.CAE.ModelCheck.ElementEdgeCheckBuilder | Represents a NXOpen.CAE.ModelCheck.ElementEdgeCheckBuilder which can be used to detect free element edges or non-manifold edges |
NXOpen.CAE.ModelCheck.ElementMaterialOrientationCheckBuilder | Represents a NXOpen.CAE.ModelCheck.ElementMaterialOrientationCheckBuilder used to check the material orientation for shell and solid elements |
NXOpen.CAE.ModelCheck.ElementQualityCheckBuilder | Represents a NXOpen.CAE.ModelCheck.ElementQualityCheckBuilder to perform quality checking on the candidate elements |
NXOpen.CAE.ModelCheck.ReverseBeamElementDirectionBuilder | Represents a NXOpen.CAE.ModelCheck.ReverseBeamElementDirectionBuilder used to reverse directions for specified beam elements |
NXOpen.CAE.ModelCheck.ReverseShellElementNormalBuilder | Represents a NXOpen.CAE.ModelCheck.ReverseShellElementNormalBuilder used to reverse normals for specified shell elements |
NXOpen.CAE.ModelCheck.SolidElementFaceNormalBuilder | Represents a NXOpen.CAE.ModelCheck.SolidElementFaceNormalBuilder used to reorient normals for left handed solid elements |
NXOpen.UF.UFAssem.IsetArrayData | Wrapper for UF_ASSEM_iset_array_data_s |
NXOpen.Preferences.IShadingViewPreferences | Represents set of Shading ViewPreferences applicable to drafting views |
NXOpen.Drawings.ShadingViewStyle | Represents set of Shading View style applicable to drafting views |
NXOpen.Preferences.ShadingViewPreferences | Represents set of Shading View Preferences applicable to drafting views |
NXOpen.Preferences.ISmoothEdgesViewPreferences | Represents set of SmoothEdgesViewPreferences applicable to drafting views |
NXOpen.Drawings.SmoothEdgesViewStyle | Represents set of Smooth Edges View Style Preferences applicable to drafting views |
NXOpen.Preferences.SmoothEdgesViewPreferences | Represents set of Smooth Edges View Preferences applicable to drafting views |
NXOpen.UF.UFSubdiv.Isocline | Wrapper for UF_SUBDIV_isocline_s |
NXOpen.ITableEditorDataProvider | Interface for providing basic data for a Table Editor block |
NXOpen.TableEditorDefaultDataProvider | Provides basic data for a Table Editor block |
NXOpen.Tooling.BomListDataProvider | Provides basic data for BOM List |
NXOpen.Tooling.CostTableDataProvider | Provides basic data for cost feature table data |
NXOpen.UF.UFAttr.Iterator | Wrapper for UF_ATTR_iterator_s |
NXOpen.CAE.ModelCheck.ITestValue | Represents the quality check criteria value settings |
NXOpen.CAE.ModelCheck.ElementSpecificTestValue | Represents the quality setting for a specfied element reference |
NXOpen.CAE.ModelCheck.QualityTestValue | Represents quality test settings of a specified test type |
NXOpen.Preferences.IThreadsViewPreferences | Represents set of ThreadsViewPreferences applicable to drafting views |
NXOpen.Drawings.ThreadsViewStyle | Represents set of Threads View Style Preferences applicable to drafting views |
NXOpen.Preferences.ThreadsViewPreferences | Represents set of Threads View Preferences applicable to drafting views |
NXOpen.Preferences.ITraceLinesViewPreferences | Represents interface for TraceLinesViewPreferences applicable to drafting views |
NXOpen.Drawings.TraceLinesViewStyle | Represents interface for Trace Lines View Style Preferences applicable to drafting views |
NXOpen.Preferences.TraceLinesViewPreferences | Represents set of Trace Lines View Preferences applicable to drafting views |
NXOpen.Preferences.IVirtualIntersectionsViewPreferences | Represents set of Virtual Intersections View Preferences applicable to drafting views |
NXOpen.Drawings.VirtualIntersectionsViewStyle | Represents set of Virtual Intersections View Style Preferences applicable to drafting views |
NXOpen.Preferences.VirtualIntersectionsViewPreferences | Represents set of Virtual Intersections View Preferences applicable to drafting views |
NXOpen.CAE.Xyplot.IVisibleDisplayStyle | Represents the interface for visible display style classes |
NXOpen.CAE.Xyplot.AngleAxisStyleSetting | Represents the angle axis display style |
NXOpen.CAE.Xyplot.LegendTableGroupStyle | Manages the legend table group styles |
NXOpen.CAE.Xyplot.TextStyleSetting | Represents the text display style |
NXOpen.CAE.Xyplot.UnknownResultScaleStyle | Represents the axis display style |
NXOpen.Preferences.IVisibleLinesViewPreferences | Represents set of VisibleLinesViewPreferences applicable to drafting views |
NXOpen.Drawings.VisibleLinesViewStyle | Represents set of Visible Lines View Style Preferences applicable to drafting views |
NXOpen.Preferences.VisibleLinesViewPreferences | Represents set of Visible Lines View Preferences applicable to drafting views |
NXOpen.DisplayManager.J3dColor | 3d interface color definition |
NXOpen.DisplayManager.J3dData | 3d interface structure |
NXOpen.UF.UFDisp.J3dEntity | Wrapper for UF_DISP_j3d_entity_s |
NXOpen.DisplayManager.J3dMaterial | 3d interface material definition |
NXOpen.Features.DeformDefinitionBuilder.JaDeformDefinitionExpData | |
NXOpen.UF.UFPlot.JobOptions | Wrapper for UF_PLOT_job_options_s |
NXOpen.UF.UFMotion.Joint | Wrapper for UF_MOTION_joint_s |
NXOpen.UF.UFMotion.JointCoupler | Wrapper for UF_MOTION_joint_coupler_s |
NXOpen.UF.UFMotion.JointLimits | Wrapper for UF_MOTION_joint_limits_s |
NXOpen.Weld.WeldJointBuilder.JointMidPointData | Joint evaluation information at the mid point |
NXOpen.UF.UFMotion.JointMotionInput | Wrapper for UF_MOTION_joint_motion_input_s |
NXOpen.UF.UFPs.KernelVersion | Wrapper for UF_PS_kernel_version_s |
NXOpen.UF.UFGdt.Keyword | Wrapper for UF_GDT_keyword_s |
NXOpen.UF.UFDrf.LabelInfo | Wrapper for UF_DRF_label_info_s |
NXOpen.UF.UFModl.LawextData | Wrapper for UF_MODL_lawext_data_s |
NXOpen.Preferences.PartVisualizationEmphasis.LayersOptions | Specifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Layers |
NXOpen.UF.UFDrf.Leader | Wrapper for UF_DRF_leader_s |
NXOpen.UF.UFDrf.LeaderData | Wrapper for UF_DRF_leader_data_s |
NXOpen.UF.UFDrf.LeaderInfo | Wrapper for UF_DRF_leader_info_s |
NXOpen.UF.UFGdt.LeaderSpec | Wrapper for UF_GDT_leader_spec_s |
NXOpen.UF.UFDrf.Lettering | Wrapper for UF_DRF_lettering_s |
NXOpen.Annotations.Lettering | Specifies lettering data |
NXOpen.UF.UFDrf.LetteringPreferences | Wrapper for UF_DRF_lettering_preferences_s |
NXOpen.UF.UFPath.LevelMarker | Wrapper for UF_PATH_level_marker_s |
NXOpen.LicenseManager.LicenseBundle | License bundle structure containing name of license bundle and number of licenses checked out of the bundle |
NXOpen.UF.UFView.LightAttributes | Wrapper for UF_VIEW_light_attributes_s |
NXOpen.UF.UFView.Lighting | Wrapper for UF_VIEW_lighting_s |
NXOpen.UF.UFView.Lights | Wrapper for UF_VIEW_lights_s |
NXOpen.UF.UFCurve.Limit | Wrapper for UF_CURVE_limit_s |
NXOpen.UF.UFGdt.LimitsAndFitsData | Wrapper for UF_GDT_limits_and_fits_data_s |
NXOpen.UF.UFGdt.LimitsAndFitsTolerance | Wrapper for UF_GDT_limits_and_fits_tolerance_s |
NXOpen.UF.UFCurve.Line | Wrapper for UF_CURVE_line_s |
NXOpen.UF.UFEval.Line | Wrapper for UF_EVAL_line_s |
NXOpen.UF.UFCurve.LineArc | Wrapper for UF_CURVE_line_arc_s |
NXOpen.UF.UFPath.LinearMotion | Wrapper for UF_PATH_linear_motion_s |
NXOpen.UF.UFDrf.LineArrowPreferences | Wrapper for UF_DRF_line_arrow_preferences_s |
NXOpen.Annotations.LineCfw | Specifies color, font, and width |
NXOpen.UF.UFDrf.LineObject | Wrapper for UF_DRF_line_object_s |
NXOpen.UF.UFUdobj.Link | Wrapper for UF_UDOBJ_link_s |
NXOpen.UF.UFMotion.Link | Wrapper for UF_MOTION_link_s |
NXOpen.UserDefinedObjects.UserDefinedObject.LinkDefinition | Contains the linked object and it's status along with the type of link |
NXOpen.UF.UFModl.LinkedExt | Wrapper for UF_MODL_linked_ext_s |
NXOpen.UF.UFWave.LinkedFeatureInfo | Wrapper for UF_WAVE_linked_feature_info_s |
NXOpen.UserDefinedObjects.UserDefinedObjectManager.LinkedUdoDefinition | Used to define a link to a UserDefinedObject |
NXOpen.UF.UFMotion.LinkInitialVel | Wrapper for UF_MOTION_link_initial_vel_s |
NXOpen.UF.UFMotion.LinkMassProperties | Wrapper for UF_MOTION_link_mass_properties_s |
NXOpen.UF.UFAssem.LoadOptions | Wrapper for UF_ASSEM_load_options_s |
NXOpen.UF.UFPart.LoadStatus | Wrapper for UF_PART_load_status_s |
NXOpen.UF.UFClone.LogFileFailure | Wrapper for UF_CLONE_log_file_failure_s |
NXOpen.Weld.LogInfo | Represents entity and its log message |
NXOpen.UF.UFBrep.Mapping | Wrapper for UF_BREP_mapping_s |
NXOpen.CAE.Post.Mark | Mark display settings |
NXOpen.UF.UFMotion.Marker | Wrapper for UF_MOTION_marker_s |
NXOpen.UF.UFUi.Mask | Wrapper for UF_UI_mask_s |
NXOpen.Selection.MaskTriple | Used in selection methods to set the types of objects that are selectable |
NXOpen.UF.UFModl.MatchedgeData | Wrapper for UF_MODL_matchedge_data_s |
NXOpen.Matrix3x3 | Represents a 3 x 3 matrix |
NXOpen.UF.MbActivatedButton | Wrapper for MB_activated_button_s |
NXOpen.UF.UFAssem.McArrayData | Wrapper for UF_ASSEM_mc_array_data_s |
NXOpen.Tooling.SIZERExportBuilder.MCDMechanicalData | Defines the mechanical data in MCD mode |
NXOpen.UF.UFMotion.Measurement | Wrapper for UF_MOTION_measurement_s |
NXOpen.Tooling.SIZERExportBuilder.MechanicalData | Defines the mechanical data in Motion mode |
NXOpen.UF.UFBound.MemberData | Wrapper for UF_BOUND_member_data_s |
NXOpen.UF.UFFam.MemberData | Wrapper for UF_FAM_member_data_s |
NXOpen.UF.UFUi.MenubarItem | Wrapper for UF_UI_menubar_item_s |
NXOpen.UF.UFSf.MeshError | Wrapper for UF_SF_mesh_error_s |
NXOpen.UF.UFSf.MeshErrorContainer | Wrapper for UF_SF_mesh_error_container_s |
NXOpen.UF.UFSf.MeshErrorList | Wrapper for UF_SF_mesh_error_list_s |
NXOpen.UF.UFSf.MeshVisuals | Wrapper for UF_SF_mesh_visuals_s |
NXOpen.UF.UFUi.MessageButtons | Wrapper for UF_UI_message_buttons_s |
NXOpen.UF.MethodList | Wrapper for method_list |
NXOpen.UF.UFSf.MidsrfUserParms | Wrapper for UF_SF_midsrf_user_parms_s |
NXOpen.Routing.BendReportManager.Mil98Report | Used in the MIL-D-9898 C specification reports |
NXOpen.UF.UFGdt.ModifierData | Wrapper for UF_GDT_modifier_data_s |
NXOpen.UF.UFGdt.ModlData | Wrapper for UF_GDT_modl_data_s |
NXOpen.UF.ModlSrfValue | Wrapper for UF_MODL_SRF_VALUE_s |
NXOpen.UF.ModlSweepTrimObject | Wrapper for UF_MODL_SWEEP_TRIM_object_s |
NXOpen.UF.UFUi.MotionCbData | Wrapper for UF_UI_motion_cb_data_s |
NXOpen.UF.UFGdt.MultipleDatum | Wrapper for UF_GDT_multiple_datum_s |
NXOpen.UF.UFClone.NameRuleDef | Wrapper for UF_CLONE_name_rule_def_s |
NXOpen.Features.SheetMetal.NamespaceDoc | Provides classes and interfaces for Sheet Metal Features |
NXOpen.Validate.NamespaceDoc | Provides classes and interfaces for Validation Utilities |
NXOpen.UserDefinedObjects.NamespaceDoc | Provides classes and interfaces for User Defined Objects (UDOs) |
NXOpen.UserDefinedTemplate.NamespaceDoc | Provides classes and interfaces for User Defined Template |
NXOpen.CAE.Xyplot.NamespaceDoc | Provides classes and interfaces for XY Graphing |
NXOpen.Annotations.NamespaceDoc | Provides classes and interfaces relating to Dimensions, Notes, Symbols, PMI, and other Annotations |
NXOpen.Features.Subdivision.NamespaceDoc | Provides classes and interfaces for Subdivision Body feature |
NXOpen.Positioning.NamespaceDoc | Provides classes and interfaces for Assembly Positioning and Constraints |
NXOpen.Features.VehicleDesign.NamespaceDoc | Provides classes and interfaces for Vehicle Design |
NXOpen.AME.NamespaceDoc | Provides classes and interfaces for AME |
NXOpen.Fields.NamespaceDoc | Provides classes and interfaces for Fields |
NXOpen.CAM.FBM.NamespaceDoc | Provides classes and interfaces for Manufacturing |
NXOpen.Formboard.NamespaceDoc | Provides interfaces and classes to the Routing Electrical Formboard functionality |
NXOpen.Gateway.NamespaceDoc | Provides classes and interfaces for Gateway |
NXOpen.CAE.Connections.NamespaceDoc | Provides classes and interfaces relating to Connections |
NXOpen.GeometricAnalysis.NamespaceDoc | Provides classes and interfaces for Geometric Analysis |
NXOpen.GeometricAnalysis.SectionAnalysis.NamespaceDoc | Provides classes and interfaces for Section Analysis |
NXOpen.SIM.NamespaceDoc | Provides classes and interfaces for Machine Tool Builder and CAM-Simulation |
NXOpen.Mfg.Mlp.NamespaceDoc | Provides classes and interfaces for Machining Line Planner |
NXOpen.Report.NamespaceDoc | Provides classes and interfaces for Report |
NXOpen.Issue.NamespaceDoc | Provides classes and interfaces for Issue Management |
NXOpen.Layer.NamespaceDoc | Provides classes and interfaces for layer |
NXOpen.SIM.PostConfigurator.NamespaceDoc | Provides classes and interfaces for Post Configurator |
NXOpen.CAM.NamespaceDoc | Provides classes and interfaces for Manufacturing |
NXOpen.Markup.NamespaceDoc | Provides classes and interfaces for Markup |
NXOpen.Drawings.NamespaceDoc | Provides classes and interfaces for Drafting Drawings |
NXOpen.Mechatronics.NamespaceDoc | Provides classes and interfaces for Mechatronics |
NXOpen.CAE.FTK.NamespaceDoc | Provides classes and interfaces to Function Toolkit |
NXOpen.AME.DB.NamespaceDoc | Provides classes and interfaces for AME DB |
NXOpen.Mfg.AM.NamespaceDoc | Provides classes and interfaces for AM |
NXOpen.ModlDirect.NamespaceDoc | Provides classes and interfaces for Direct Modeling |
NXOpen.ModlUtils.NamespaceDoc | Provides classes and interfaces for ModlUtils |
NXOpen.Layout2d.NamespaceDoc | Provides classes and interfaces for Layout2D |
NXOpen.Diagramming.NamespaceDoc | Provides classes and interfaces relating to Diagramming |
NXOpen.Diagramming.Tables.NamespaceDoc | Provides classes and interfaces for Diagramming Tables |
NXOpen.DiagrammingLibraryAuthor.NamespaceDoc | Provides classes and interfaces for Diagramming Library Authoring |
NXOpen.NamespaceDoc | Provides classes and interfaces for the NX Open Common API |
NXOpenUI.NamespaceDoc | Provides classes and interfaces for NX Open UI classes |
NXOpen.OpenXml.NamespaceDoc | Provide classes and interfaces for OpenXml |
NXOpen.VisualReporting.NamespaceDoc | Provides classes and interfaces for Visual Reporting |
NXOpen.Options.NamespaceDoc | Provides classes and interfaces for options |
NXOpen.PartFamily.NamespaceDoc | Provides classes and interfaces for Part Family |
NXOpen.Die.NamespaceDoc | Provides classes and interfaces relating to Die Engineering and Die Design |
NXOpen.PhysMat.NamespaceDoc | Provides classes and interfaces for Physical Material |
NXOpen.Placement.NamespaceDoc | Provides classes and interfaces for Placement |
NXOpen.PLAS.NamespaceDoc | Provides classes and interfaces for PLAS |
NXOpen.Preferences.NamespaceDoc | Provides classes and interfaces for preferences |
NXOpen.Display.NamespaceDoc | Provides classes and interfaces for Display |
NXOpen.CAE.NamespaceDoc | Provides classes and interfaces relating to Advanced Simulation and Design Simulation |
NXOpen.DMU.NamespaceDoc | Provides classes and interfaces for DMU |
NXOpen.Utilities.NamespaceDoc | Provides classes and interfaces for Utilities |
NXOpen.Drafting.NamespaceDoc | Provides classes and interfaces for the Drafting |
NXOpen.VectorArithmetic.NamespaceDoc | Provides classes and interfaces for Vector Arithmetic |
NXOpen.Assemblies.NamespaceDoc | Provides classes and interfaces for Assemblies |
NXOpen.Features.ShipDesign.GeneralArrangement.NamespaceDoc | Provides classes and interfaces for Ship Design General Arrangement |
NXOpen.GeometricUtilities.NamespaceDoc | Provides classes and interfaces for Geometric Utilities |
NXOpen.Routing.Electrical.NamespaceDoc | Provides classes and interfaces for Routing Electrical |
NXOpen.Features.ShipDesign.NamespaceDoc | Provides classes and interfaces for Ship Design |
NXOpen.Routing.NamespaceDoc | Provides classes and interfaces for Routing |
NXOpen.Assemblies.ProductInterface.NamespaceDoc | Provides classes and interfaces for Assembly Product Interfaces |
NXOpen.Motion.NamespaceDoc | Provides classes and interfaces for Motion Simulation |
NXOpen.ShapeSearch.NamespaceDoc | Provides classes and interfaces for Shape Search |
NXOpen.SheetMetal.NamespaceDoc | Provides classes and interfaces for Sheet Metal |
NXOpen.ShipDesign.NamespaceDoc | Provides classes and interfaces for Ship Design |
NXOpen.MfgModel.NamespaceDoc | Provides classes and interfaces for Manufacturing Model |
NXOpen.LineDesigner.NamespaceDoc | Provides classes and interfaces for Line Designer |
NXOpen.Facet.NamespaceDoc | Provides classes and interfaces for Faceted Representations |
NXOpen.ToolDesigner.NamespaceDoc | Provides classes and interfaces for ToolDesigner |
NXOpen.PDM.NamespaceDoc | Provides classes and interfaces for PDM |
NXOpen.Tooling.NamespaceDoc | Provides classes and interfaces for Tooling |
NXOpen.MechanicalRouting.NamespaceDoc | Provides classes and interfaces for Mechanical Routing |
NXOpen.CAE.Optimization.NamespaceDoc | Provides classes and interfaces relating to Optimization |
NXOpen.CAE.QualityAudit.NamespaceDoc | Provides classes and interfaces relating to Quality Audit |
NXOpen.BlockStyler.NamespaceDoc | Provides classes and interfaces for Block Styler |
NXOpen.MenuBar.NamespaceDoc | Provides classes and interfaces for the Menu Bar |
NXOpen.PID.NamespaceDoc | Provides classes and interfaces for PID |
NXOpen.CAE.AeroStructures.NamespaceDoc | Provides classes and interfaces relating to Aero Structures |
NXOpen.Mfg.NamespaceDoc | Provides classes and interfaces for Manufacturing |
NXOpen.PressLineSimulation.NamespaceDoc | Provides classes and interfaces for Press Line Simulation |
NXOpen.Weld.NamespaceDoc | Provides classes and interfaces for Weld |
NXOpen.CAE.ResponseSimulation.NamespaceDoc | Provides classes and interfaces for Response Simulation |
NXOpen.CAE.ModelCheck.NamespaceDoc | Provides classes and interfaces relating to Model Check |
NXOpen.Features.NamespaceDoc | Provides classes and interfaces for features |
NXOpen.Optimization.NamespaceDoc | Provides classes and interfaces for Optimization |
NXOpen.UIStyler.NamespaceDoc | Provides classes and interfaces for User Interface Styler |
NXOpen.BodyDes.NamespaceDoc | Provides classes and interfaces for Body Design |
NXOpen.UF.NamespaceDoc | Provides classes and interfaces to the UF API |
NXOpen.CAE.AeroStructures.Author.NamespaceDoc | Provides classes and interfaces relating to Aero Structures Author |
NXOpen.UF.UFClone.NamingFailures | Wrapper for UF_CLONE_naming_failures_s |
NXOpen.Annotations.NarrowDimensionData | Specifies the narrow dimension preferences |
NXOpen.UF.UFDrf.NarrowDimensionInfo | Wrapper for UF_DRF_narrow_dimension_info_s |
NXOpen.UF.UFUgmgr.NewAlternatePartNo | Wrapper for UF_UGMGR_new_alternate_part_no_s |
NXOpen.UF.UFUgmgr.NewDatasetName | Wrapper for UF_UGMGR_new_dataset_name_s |
NXOpen.UF.UFUgmgr.NewId | Wrapper for UF_UGMGR_new_id_s |
NXOpen.UF.UFUgmgr.NewPartNo | Wrapper for UF_UGMGR_new_part_no_s |
NXOpen.UF.UFUgmgr.NewPartRev | Wrapper for UF_UGMGR_new_part_rev_s |
NXOpen.Preferences.WorkPlane.NonuniformGridSize | Nonuniform grid size parameters |
NXRemotableObject | |
NXOpen.AME.AMEManager | Represents a manager of automation designer objects |
NXOpen.AME.DiagramManager | Represents an object that manages sheet elements |
NXOpen.Annotations.AnnotationManager | Represents an object that manages annotation and PMI (Product and Manufacturing Information) display instance objects |
NXOpen.Annotations.PmiManager | Represents an object that manages PMI objects |
NXOpen.Assemblies.AssemblyManager | Represents the Assembly Manager |
NXOpen.Assemblies.ProductInterface.Collection | This class represents the collection of product interface objects |
NXOpen.Assemblies.ProductOutlineManager | Represents a collection of assemblies |
NXOpen.AssembliesUtils | Contains various assembly utility methods |
NXOpen.AttributeManager | Provides methods for querying and updating attributes |
NXOpen.CAE.AbstractionManager | Provides method for creating builder for abstraction commands in a fem part |
NXOpen.CAE.AeroStructManager | Represents the Aerosizing manager that contains all Aerosizing objects |
NXOpen.CAE.AeroStructures.Author.ABB | Represents a AeroStruct application building block (ABB) |
NXOpen.CAE.AeroStructures.Author.MethodLibrary | Represents a NXOpen.CAE.AeroStructures.Author.MethodLibrary object |
NXOpen.CAE.AfuDataConvertor | Convert data values for the AFU Data Record |
NXOpen.CAE.AfuManager | AFU File and Data Record Manager |
NXOpen.CAE.AfuMathOperation | Does math operations on the AFU Data Records |
NXOpen.CAE.AssociationUtilities | Represents Physical NXOpen.CAE.AssociationUtilities class |
NXOpen.CAE.CADModeling | The CADModeling class provides method to create cad face using polygon face |
NXOpen.CAE.CaeSession | This class provides access to all session related CAE functionality |
NXOpen.CAE.Connections.Utils | Contains universal connections utility methods |
NXOpen.CAE.CorrelManager | Represents the correl manager that contains all correl and pre-test objects |
NXOpen.CAE.DurabilityManager | Represents the durability manager that contains all durability objects |
NXOpen.CAE.ElementAssociatedDataUtils | Represents a system to access element associated data |
NXOpen.CAE.ElementInfoUtils | Represents a system to query information about FE-based elements |
NXOpen.CAE.ElementTypes | Represents an NXOpen.CAE.ElementTypes class |
NXOpen.CAE.FTK.DataManager | Ftk data manager |
NXOpen.CAE.FTK.FTKManager | FTK function data manager |
NXOpen.CAE.FTK.OptionSetting | Manager the options data for AFU Data Record |
NXOpen.CAE.GroupElemMethodElemOption | Represents the output from the Group Element smart selector method |
NXOpen.CAE.LaminateGlobalLayupMgr | Represent the laminate global layup manager which manages all the global layups in the laminate ply-based modeling project |
NXOpen.CAE.LaminateManager | Represents the laminate manager that contains all laminate post report setups |
NXOpen.CAE.MeshControlDisplayManager | Provides method for creating builder for mesh control display operation commands in both sim and fem part |
NXOpen.CAE.ModelCheck.TestValueTypes | Represents the quality check criteria value settings |
NXOpen.CAE.ModelCheckManager | Provides method for creating builder for node element operation commands in a fem part |
NXOpen.CAE.NodeElementInfoManager | Provides method for creating builder for node element info operation commands in both sim and fem part |
NXOpen.CAE.NodeElementManager | Provides method for creating builder for node element operation commands in a fem part |
NXOpen.CAE.Optimization.DAOOptimizationManager | Represents the Design and Analysis optimization manager that contains all optimization objects |
NXOpen.CAE.Optimization.TBSOptimizationManager | Represents the optimization manager to contain the optimization solutions and take charge of creating optimization objects |
NXOpen.CAE.PolygonGeometryManager | Provides methods for managing set NXOpen.CAE.PolygonGeometryManager |
NXOpen.CAE.Post | Represents Post-Processing |
NXOpen.CAE.PostAnnotationPreference | Represents Post-Annotation Preferences |
NXOpen.CAE.PostGraphPreference | Represents Post-Graph Preferences |
NXOpen.CAE.PostIdentifyPreference | Represents Post-Identify Preferences |
NXOpen.CAE.PostLegendPreference | Represents Post-Legend Preferences |
NXOpen.CAE.PostPreference | Represents Post Preferences |
NXOpen.CAE.PostProcessingSession | This is the class representing a NXOpen.CAE.PostProcessingSession |
NXOpen.CAE.PostResultNavigatorPreference | Represents Post-ResultNavigator Preferences |
NXOpen.CAE.PostResultPreference | Represents Post-Result Preferences |
NXOpen.CAE.PostScenarioManager | Manages the creation of a NXOpen.CAE.PostScenarioBuilder |
NXOpen.CAE.PreTestExciterSelectionControl | Represents a pre-test exciter selection setup |
NXOpen.CAE.PreTestSensorSelectionControl | Represents a pre-test sensor selection setup |
NXOpen.CAE.QualityAudit.Manager | The Quality Audit Manager class offers means to check for errors at assembly level |
NXOpen.CAE.QueryCurveManager | Provides methods for managing the query curves |
NXOpen.CAE.ResponseSimulation.EvaluationSettingManager | Represents the manager of all evaluation setting objects |
NXOpen.CAE.ResponseSimulation.Manager | Represents the Response Dynamics manager to contain all Response Dynamics objects |
NXOpen.CAE.ResultManager | Manages results |
NXOpen.CAE.SelectElementsManager | Provides method for creating builder for select element operation commands in both fem and sim part |
NXOpen.CAE.SelectionRecipeDisplay | Represents the display attributes of a CAE.SelectionRecipe |
NXOpen.CAE.ShowHideManager | Provides method for creating builder for Show Hide operation commands in a fem/sim part |
NXOpen.CAE.SimLoadRecipeMapEntryTargetTypes | The class handles the enum definitions needed by load recipe map entries |
NXOpen.CAE.SimLoadRecipeTypes | The class handles the enum definitions needed by load recipes |
NXOpen.CAE.SimSolveManager | Represents a NXOpen.CAE.SimSolveManager manager which is used to manage the solve process of solutions |
NXOpen.CAE.SmartSelectionManager | Provides methods for creating smart selection methods in a cae part |
NXOpen.CAE.ViewLayoutManager | Represents Interface to access CAE View Layout Manager object |
NXOpen.CAE.Xyplot.WindowManager | Manages the separate graphic windows |
NXOpen.CAE.Xyplot.XYPlotManager | XYPlot function manager |
NXOpen.CaeObjectType | Represent options for CAE selection |
NXOpen.CAM.CAMSession | Represents cam session |
NXOpen.CAM.PathDisplay | Represents a class that is used for NX testing |
NXOpen.ClipboardOperationsManager | Used to create importer objects |
NXOpen.CollaborativeContentManager | Represents the manager for the various collaborative design contents and this class is usable only when NX is running in managed mode |
NXOpen.ColorManager | Contains functionality pertaining to colors |
NXOpen.DexManager | The DexManager class provides methods to create Dex Builder objects |
NXOpen.Diagramming.DiagrammingManager | A manager to deal with all objects |
NXOpen.Diagramming.SheetManager | A manager to deal with all objects |
NXOpen.Display.DynamicSectionTypes | Represents a enumerations used by Dynamic Section Builder |
NXOpen.DisplayManager | Represents an object to manage display settings |
NXOpen.DMU.DMUManager | Represents an object that manages DMU application specific objects and preferences |
NXOpen.Drafting.AutomationManager | Represents a NXOpen.Drafting.AutomationManager |
NXOpen.Drafting.DraftingApplicationManager | Represents an object that manages drafting objects and member views |
NXOpen.Drafting.SettingsManager | Represents an object that manages drafting settings |
NXOpen.DraftingManager | Represents an object that manages drafting objects and member views |
NXOpen.DrawingCompareManager | Represents an object that manages drawing compare |
NXOpen.Drawings.BaseViewStyle | Represents set of Base View Style Preferences applicable to drafting views |
NXOpen.Drawings.ConvertToPMIBuilderManager | Represents NXOpen.Drawings.ConvertToPMIBuilderManager |
NXOpen.Drawings.FlatPatternViewStyle | Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings |
NXOpen.Drawings.GeneralViewStyle | Represents set of General View Styles Preferences applicable to drafting views |
NXOpen.Drawings.HiddenLinesViewStyle | Represents set of Hidden Lines View Style Preferences applicable to drafting views |
NXOpen.Drawings.InheritPmiViewStyle | Represents set of InheritPmiViewStyle applicable to drafting views |
NXOpen.Drawings.OrderManager | Represents an object that manages orders |
NXOpen.Drawings.OrientationViewStyle | Represents set of Orientation View Style Preferences applicable to drafting views |
NXOpen.Drawings.PerspectiveViewStyle | Represents set of PerspectiveViewStyle applicable to drafting views |
NXOpen.Drawings.ProjectedViewStyle | Represents set of Projected View Style Preferences applicable to drafting views |
NXOpen.Drawings.SectionViewStyle | Represents set of Section View Style Preferences applicable to drafting views |
NXOpen.Drawings.ShadingViewStyle | Represents set of Shading View style applicable to drafting views |
NXOpen.Drawings.SheetTemplateManager | Represents a manager of NXOpen.Drawings.DraftingView s |
NXOpen.Drawings.ShipbuildingLinesViewStyle | Represents set of Shipbuilding Lines View Style applicable to drafting views |
NXOpen.Drawings.ShipDraftingViewLinesViewStyle | Represents set of Ship Drafting Lines View Style applicable to drafting views |
NXOpen.Drawings.SmoothEdgesViewStyle | Represents set of Smooth Edges View Style Preferences applicable to drafting views |
NXOpen.Drawings.ThreadsViewStyle | Represents set of Threads View Style Preferences applicable to drafting views |
NXOpen.Drawings.TraceLinesViewStyle | Represents interface for Trace Lines View Style Preferences applicable to drafting views |
NXOpen.Drawings.ViewStyle | Represents set of style applicable to drafting views |
NXOpen.Drawings.VirtualIntersectionsViewStyle | Represents set of Virtual Intersections View Style Preferences applicable to drafting views |
NXOpen.Drawings.VisibleLinesViewStyle | Represents set of Visible Lines View Style Preferences applicable to drafting views |
NXOpen.DrawingUtils | Contains various drawing utility methods |
NXOpen.EngineeringFunction | Contains Engineering Function methods |
NXOpen.Facet.FacetModelingCollection | Collection of freeform facet operations |
NXOpen.FacetSelectionRuleFactory | This class contains the factory methods for creating facet selection intent rules |
NXOpen.Features.AeroCollection | This class contains the factory method for creating aero design feature builder |
NXOpen.Features.CurveFeatureCollection | Manages curve features |
NXOpen.Features.CustomFeatureClassManager | Provides interfaces to utilise custom feature functionality |
NXOpen.Features.DesignFeatureCollection | Manages design features |
NXOpen.Features.FreeformCurveCollection | Collection of freeform curve based features |
NXOpen.Features.FreeformSurfaceCollection | Collection of freeform surface based features |
NXOpen.Features.LatticeFeatureCollection | Manages lattice features |
NXOpen.Features.OptimizeFace | Represents a optimize face feature |
NXOpen.Features.SheetMetal.AeroSheetmetalManager | Provides methods for manipulating the Knowledge Fusion rules in a part |
NXOpen.Features.SheetMetal.SheetmetalManager | Represents an object that manages sheetmetal features |
NXOpen.Features.ShipDesign.PenetrationManager | Contains the collection objects for creating and iterating over Penetration Request Properties objects |
NXOpen.Features.ShipDesign.PenetrationUtils | Contains various penetration utility methods |
NXOpen.Features.SweepFeatureCollection | Manages sweep-like features |
NXOpen.Features.TrimFeatureCollection | Manages design features |
NXOpen.Features.UserDefinedFeatureClassManager | JA interface for the UserDefinedFeatureClassManager object |
NXOpen.FontCollection | Represents a collection of typographical fonts (for example, Arial, OldEnglish) |
NXOpen.Formboard.FormboardManager | Contains information about flattened harness drawing and drafting data for harness manufacturing drawings (Formboard Drawings) |
NXOpen.Gateway.BookmarkFile | Represents operations which can be done on bookmark files |
NXOpen.Gateway.ImageCaptureManager | the ImageCaptureManager class |
NXOpen.GeometricAnalysis.AnalysisManager | Represents the collection of analysis commands |
NXOpen.GeometricAnalysis.AnalysisObjectCollectionEx | Collection of analysis objects |
NXOpen.GeometricAnalysis.CurveAnalysisDisplay | Represents a tool to control whether to show a curve's poles,knots,combs,peaks and inflections |
NXOpen.GeometricAnalysis.SurfaceAnalysisDisplay | Represents a tool control whether to show a surface's poles and knots |
NXOpen.GeometricUtilities.CAMDataPrepManager | Contains the create functions for builders |
NXOpen.GeometricUtilities.LocalUntrimManager | Provides create builder methods for LocalUntrimBuilder |
NXOpen.GeometricUtilities.OmnicadManager | Represents a manager for creating builder objects for OmniCAD Free Transformer |
NXOpen.ImportManager | Used to create importer objects |
NXOpen.InferSnapType | Represent options for snap selection |
NXOpen.Information | Represents a class that provides methods for displaying information about part history, interpart parents and children, features, points, and other NX Objects |
NXOpen.Issue.IssueManager | Contains the collection objects for creating and iterating over issue objects |
NXOpen.JournalManager | Represents the JournalManager which is used to query data about journals when recording and replaying journal files |
NXOpen.Layer.LayerManager | Represents an object that manages layers |
NXOpen.LicenseManager | Provides utility methods for managing licenses |
NXOpen.LineDesigner.AutotestPrint | Represents a class that is used for LineDesigner testing |
NXOpen.LineDesigner.DBNodeManager | Represents a manager of line designer db nodes |
NXOpen.LineDesigner.DBNodeUtils | Represents a utils of line designer for journaling uinode methods |
NXOpen.LineDesigner.LineDesignerManager | Represents a manager of line designer builders |
NXOpen.LineDesigner.LineDesignerUserCallBackManager | Represents a manager of line designer user callbacks |
NXOpen.LineDesigner.ModelPlantManager | Represents a manager of line designer model |
NXOpen.LineDesigner.UINodeUtils | Represents a utils of line designer for journaling uinode methods |
NXOpen.ListingWindow | Represents a ListingWindow |
NXOpen.LoadOptions | Contains accessor methods for all the part load options |
NXOpen.LogFile | Represents the system log file |
NXOpen.MaterialManager | A manager to deal with all material objects |
NXOpen.MaterialUtilities | Represents Physical NXOpen.MaterialUtilities class |
NXOpen.MathUtils | Contains various math utility methods |
NXOpen.MeasureManager | Provides methods for manipulating the measurement objects in a part |
NXOpen.Measurement | Provides methods for calculating and displaying the measurement information |
NXOpen.MechanicalRouting.BuilderFactory | Represents an NXOpen.MechanicalRouting.BuilderFactory object |
NXOpen.MechanicalRouting.ConnectivityService | Represents a NXOpen.MechanicalRouting.ConnectivityService object |
NXOpen.MechanicalRouting.InsulationService | Represents a NXOpen.MechanicalRouting.InsulationService object |
NXOpen.MechanicalRouting.LogicalDesignService | Represents a NXOpen.MechanicalRouting.LogicalDesignService object |
NXOpen.MechanicalRouting.RoutingManager | Represents an NXOpen.MechanicalRouting.RoutingManager object |
NXOpen.Mechatronics.MechatronicsManager | Contains the collection objects for creating and iterating over Mechatronics Designer System Navigator objects |
NXOpen.Mechatronics.MechatronicsSession | Represents Mechatronics session |
NXOpen.Mechatronics.PhysicsManager | A manager to deal with all physics objects |
NXOpen.MenuBar.MenuBarManager | Interface for the MenuBarManager object |
NXOpen.Mfg.AM.ApplicationManager | Represents the Additive Manufacturing application |
NXOpen.Mfg.AM.PrinterManager | Represents the Additive Manufacturing Printer Service |
NXOpen.Mfg.Mlp.MachiningLinePlanner | Represents the Line Planner |
NXOpen.MfgModel.MfgModelManager | Represents the manager for Mfg model |
NXOpen.ModelingViewHighQualityImage | Represents the properties and methods for generating a High Quality Image of a Modeling View |
NXOpen.Motion.MechanismExport | Represents a Mechanism Export object used to export one or more Motion objects to a text file |
NXOpen.Motion.MechanismImport | Represents a Mechanism Import object used to import a Motion model from a text file |
NXOpen.Motion.MotionEnvironment | Represents a Motion Environment |
NXOpen.Motion.MotionManager | A manager to deal with all motion objects |
NXOpen.Motion.MotionMethods | Represents a NXOpen.Motion.MotionMethods class |
NXOpen.Motion.MotionSession | Represents motion session |
NXOpen.Motion.MotionSimulation | Represents Motion |
NXOpen.Motion.PostProcess | Represents the motion post process |
NXOpen.MovieManager | Represents a MovieManager class |
NXOpen.NXColor | Represents a standard NX color |
NXOpen.NXMessageBox | Displays message box |
NXOpen.Options.OptionsManager | Manages options |
NXOpen.PartSaveOptions | Contains accessor methods for all part save options that follow the part |
NXOpen.PDM.ConfigurationManager | Represents Configuration Manager |
NXOpen.PDM.PartManager | This class contains methods to create and manage parts in NX Manager mode |
NXOpen.PDM.PdmPart | This class serves as a gateway to part-specific tools for NX Manager mode |
NXOpen.PDM.PdmSearchManager | Represents search manager class |
NXOpen.PDM.PdmSession | Represents the NX Manager session |
NXOpen.PDM.RequirementUtils | Collection of PDM utility methods |
NXOpen.PDM.WebAppSession | Represents the Web App session |
NXOpen.PID.PidManager | A manager to deal with all objects |
NXOpen.PlaneTypes | Represents an NXOpen.PlaneTypes class |
NXOpen.PLAS.PlasManager | A manager to deal with all objects |
NXOpen.PlotManager | The PlotManager class provides methods to create Gateway Builder objects |
NXOpen.PolygonModelingTaskEnvironment | Represents the Polygon Modeling task environment associated with a session |
NXOpen.Preferences.AnnotationPreferences | Represents the global preferences for annotations |
NXOpen.Preferences.BaseViewPreferences | Represents set of Base View Preferences applicable to drafting views |
NXOpen.Preferences.DetailViewPreferences | Represents set of Detail View Preferences applicable to drafting views |
NXOpen.Preferences.DraftingPreferenceManager | Represents a collection of pmi preference builders |
NXOpen.Preferences.FlatPatternViewPreferences | Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings |
NXOpen.Preferences.GeneralViewPreferences | Represents set of General View Preferencess applicable to drafting views |
NXOpen.Preferences.HiddenLinesViewPreferences | Represents set of Hidden Lines View Preferences applicable to drafting views |
NXOpen.Preferences.InheritPmiPreferences | Represents set of InheritPmiPreferences applicable to drafting views |
NXOpen.Preferences.ObjectPreferences | Captures the UI based calls required for Object Preferences |
NXOpen.Preferences.PartAeroSheetmetal | Represents the NX Sheetmetal preferences applicable to part |
NXOpen.Preferences.PartDrafting | Represents the set of drafting preferences applicable to part |
NXOpen.Preferences.PartFlexiblePrintedCircuitDesign | Represents the Flexible Printed Circuit Design preferences applicable to part |
NXOpen.Preferences.PartModeling | Represents the set of Modeling preferences applicable to part |
NXOpen.Preferences.PartObject | Represents the set of object preferences applicable to entire part |
NXOpen.Preferences.PartPreferences | Represents set of preferences applicable to displayed part |
NXOpen.Preferences.PartSheetmetal | Represents the NX Sheetmetal preferences applicable to part |
NXOpen.Preferences.PartSketch | Represents the set of Sketcher preferences applicable to entire part |
NXOpen.Preferences.PartUserInterface | Represents the set of User Interface preferences applicable to entire part |
NXOpen.Preferences.PartVisualizationColorSetting | Represents the set of visualization preferences under color setting tab applicable to part |
NXOpen.Preferences.PartVisualizationEmphasis | Represents visualization preferences for emphasis that are applicable to the entire part |
NXOpen.Preferences.PartVisualizationLine | Represents the set of visualization preferences under Line tab applicable to part |
NXOpen.Preferences.PartVisualizationNamesBorders | Represents the set of visualization preferences of entire Working Part coming under Names/borders Tab |
NXOpen.Preferences.PartVisualizationPerformance | Represents the set of visualization performance preferences applicable to entire part |
NXOpen.Preferences.PartVisualizationScreen | Represents the set of visualization preferences under screen tab applicable to part |
NXOpen.Preferences.PartVisualizationShade | Represents the set of shade visualization preferences applicable to entire part |
NXOpen.Preferences.PartVisualizationVisual | Represents the set of visualization preferences applicable to entire session |
NXOpen.Preferences.PostProcessing | CAE Post Processing preferences |
NXOpen.Preferences.ProjectedViewPreferences | Represents set of Projected View Preferences applicable to drafting views |
NXOpen.Preferences.RoutingApplicationView | The RoutingApplicationView class contains all of the various preferences and options available from the Routing Application View file |
NXOpen.Preferences.RoutingCharacteristics | Contains all of the various preferences for option and required characteristics |
NXOpen.Preferences.RoutingElectrical | The RoutingElectrical object stores a set of route electrical preferences |
NXOpen.Preferences.RoutingLogical | The RoutingLogical object stores a set of route logical preferences |
NXOpen.Preferences.RoutingMechanical | The RoutingMechanical object stores a set of route mechanical preferences |
NXOpen.Preferences.RoutingPart | Contains the preferences related to placing/finding/adding parts and generating the Routing bill of materials |
NXOpen.Preferences.RoutingPartLibrary | Represents a Routing Part library |
NXOpen.Preferences.RoutingPath | The RoutingPath object stores a set of path preferences |
NXOpen.Preferences.RoutingStock | The Preferences for Routing Stock objects |
NXOpen.Preferences.RoutingUserPreferences | Allows access to the User Preferences section of the Routing Application View file |
NXOpen.Preferences.RulePreferences | Provides methods for manipulating the Knowledge Fusion preferences in a session |
NXOpen.Preferences.SectionViewPreferences | Represents set of Section View Preferences applicable to drafting views |
NXOpen.Preferences.SessionAssemblies | Represents the set of Assemblies Preferences applicable to entire session |
NXOpen.Preferences.SessionDrafting | Represents the set of Drafting preferences applicable to entire session |
NXOpen.Preferences.SessionMeasureRequirements | Represents the two options available on the Measure Requirements toolbar and applicable to the entire session |
NXOpen.Preferences.SessionModeling | Represents the set of Modeling preferences applicable to entire session |
NXOpen.Preferences.SessionNXGateway | Represents the set of NXGateway Preferences applicable to entire session |
NXOpen.Preferences.SessionPdm | Represents the NX Manager preferences for the entire session |
NXOpen.Preferences.SessionPmi | Represents the set of PMI preferences applicable to entire session |
NXOpen.Preferences.SessionPreferences | Represents a collection of session based preferences |
NXOpen.Preferences.SessionSketch | Represents the set of sketch preferences applicable to entire session |
NXOpen.Preferences.SessionUserInterface | Represents the set of User Interface preferences applicable to entire session |
NXOpen.Preferences.SessionUserInterfaceUI | Represents all UI based session user interface preferneces |
NXOpen.Preferences.SessionVisualizationColorSetting | Represents the set of visualization preferences applicable to entire session |
NXOpen.Preferences.SessionVisualizationEmphasis | Represents visualization preferences for emphasis that are applicable to the entire session |
NXOpen.Preferences.SessionVisualizationHighEndRendering | Represents the set of visualization preferences under High End Rendering tab applicable to entire session |
NXOpen.Preferences.SessionVisualizationHighQualityImage | Represents the High Quality Image preferences for the entire session |
NXOpen.Preferences.SessionVisualizationPerformance | Represents visualization performance preferences that are applicable to the entire session |
NXOpen.Preferences.SessionVisualizationScreen | Represents the set of visualization preferences under screen tab applicable to entire session |
NXOpen.Preferences.SessionVisualizationShade | Represents the UI related Visualization Shade preferences |
NXOpen.Preferences.SessionVisualizationSpecialEffects | Represents the set of visualization special effect preferences applicable to entire session |
NXOpen.Preferences.SessionVisualizationVisual | Represents all UI based session Visualization visual preferences |
NXOpen.Preferences.SessionWorkPlane | Represents the set of WorkPlane preferences applicable to session |
NXOpen.Preferences.ShadingViewPreferences | Represents set of Shading View Preferences applicable to drafting views |
NXOpen.Preferences.ShipbuildingLinesViewPreferences | Represents set of Shipbuilding Lines View Preferences applicable to drafting views |
NXOpen.Preferences.ShipDraftingViewLinesViewPreferences | Represents set of Ship Drafting View Lines View Preferences applicable to drafting views |
NXOpen.Preferences.SketchPreferences | Represents the set of sketch preferences applicable on NXOpen.Sketch object |
NXOpen.Preferences.SmoothEdgesViewPreferences | Represents set of Smooth Edges View Preferences applicable to drafting views |
NXOpen.Preferences.SubdivisionModelingPreferences | Represents the set of Modeling preferences applicable to entire session |
NXOpen.Preferences.ThreadsViewPreferences | Represents set of Threads View Preferences applicable to drafting views |
NXOpen.Preferences.TraceLinesViewPreferences | Represents set of Trace Lines View Preferences applicable to drafting views |
NXOpen.Preferences.ViewPreferences | Represents set of style applicable to drafting views |
NXOpen.Preferences.ViewVisualizationSpecialEffects | Represents the set of visualization special effect preferences applicable to entire session |
NXOpen.Preferences.ViewVisualizationVisual | Represents the set of View related Visualization visual preferences |
NXOpen.Preferences.VirtualIntersectionsViewPreferences | Represents set of Virtual Intersections View Preferences applicable to drafting views |
NXOpen.Preferences.VisibleLinesViewPreferences | Represents set of Visible Lines View Preferences applicable to drafting views |
NXOpen.Preferences.VisualizationFonts | Represents visualization preferences for standard text fonts applicable to the entire session |
NXOpen.Preferences.VisualizationHandles | Represents the set of visualization preferences under handles tab applicable to entire session |
NXOpen.Preferences.VisualizationLine | This class is for UI related preferences changes |
NXOpen.PressLineSimulation.ApplicationManager | Represents a manager the of press line simulation application builders |
NXOpen.PropertiesManager | The PropertiesManager class provides methods to create Gateway Properties Builder objects |
NXOpen.PvtransManager | The PvtransManager class provides methods to create Pvtrans Builder objects |
NXOpen.Report.AutomationLogger | Represents the automation logger to log information for report automation program |
NXOpen.Report.CommandManager | Represents the command manager |
NXOpen.Report.ReportManager | Represents the report manager |
NXOpen.Routing.BendReportManager | The Routing Bend Report Manager allows you to get a variety of bend reports |
NXOpen.Routing.CustomManager | The Routing Custom Manager allows you to customize Routing by setting session wide Routing preferences and by adding plugins, callbacks, and design rules |
NXOpen.Routing.DesignRuleManager | Represents NXOpen.Routing.DesignRuleManager object |
NXOpen.Routing.ReuseLibrary | Represents a NXOpen.Routing.ReuseLibrary |
NXOpen.Routing.RouteManager | Manages various Routing collections and methods for use in the current work part |
NXOpen.Routing.SegmentManager | Contains the type of the routing part as well as the Collection objects for creating/iterating over routing objects |
NXOpen.RuleManager | Provides methods for manipulating the Knowledge Fusion rules in a part |
NXOpen.SaveOptions | Contains accessor methods for all part save options that follow the session |
NXOpen.ScRuleFactory | This class contains the factory methods for creating selection intent rules |
NXOpen.Selection | Defines an interface object for executing selection operations |
NXOpen.ShapeSearch.SearchManager | This class manages Shape Search |
NXOpen.ShipDesign.ApplicationUtils | Represents Generator which wrap the ship api for china |
NXOpen.ShipDesign.GeneralArrangementManager | Represents the interface for General Arrangement classes |
NXOpen.ShipDesign.Generator | Represents Generator which wrap the ship api for china |
NXOpen.ShipDesign.NavigatorCollection | Represents the interface for navigator action classes |
NXOpen.ShipDesign.ShipSession | Represents Ship session |
NXOpen.SIM.PostConfigurator.PostConfiguratorManager | Represents Post Configurator Manager |
NXOpen.SpreadsheetManager | Represents a class for interacting with spreadsheets |
NXOpen.SubdivisionTaskEnvironment | Represents the subdivision task environment associated with a session |
NXOpen.ToolDesigner.DBNodeManager | Represents a manager of tool designer db nodes |
NXOpen.ToolDesigner.ToolDesignerManager | Represents a manager of tool designer builders |
NXOpen.Tooling.CaeReuseLibrary | Represents a NXOpen.Tooling.CaeReuseLibrary |
NXOpen.Tooling.CAMDataManager | Represents an object that manages cam data objects |
NXOpen.Tooling.GuidedExtensionManager | Represents the manager of the GuidedExtension builder |
NXOpen.Tooling.MoldwizardManager | Provides create builder methods for Moldwizard |
NXOpen.Tooling.MWMoldedPartValidationManager | Represents a manager of the MWMoldedPartValidation builder |
NXOpen.Tooling.ProgressiveDieManager | Provides create builder methods for Progressive Die |
NXOpen.Tooling.ReusableObjectManager | Represents a collection of ReusableObjects |
NXOpen.Tooling.ToolingManager | Contains the collection objects for creating and iterating over Reuse Library objects |
NXOpen.Tooling.ToolingSession | Represents Tooling session |
NXOpen.Tooling.WallThicknessCheckerManager | Represents the manager of the WallThicknessChecker builder |
NXOpen.UF.UF | Contains wrappers for all 'UF' functions and data types |
NXOpen.UF.UFAbort | Contains wrappers for all 'UF_ABORT' functions and data types |
NXOpen.UF.UFAssem | Contains wrappers for all 'UF_ASSEM' functions and data types |
NXOpen.UF.UFAttr | Contains wrappers for all 'UF_ATTR' functions and data types |
NXOpen.UF.UFBound | Contains wrappers for all 'UF_BOUND' functions and data types |
NXOpen.UF.UFBrep | Contains wrappers for all 'UF_BREP' functions and data types |
NXOpen.UF.UFCam | Contains wrappers for all 'UF_CAM' functions and data types |
NXOpen.UF.UFCambnd | Contains wrappers for all 'UF_CAMBND' functions and data types |
NXOpen.UF.UFCambndWedm | Contains wrappers for all 'UF_CAMBND_WEDM' functions and data types |
NXOpen.UF.UFCamgeom | Contains wrappers for all 'UF_CAMGEOM' functions and data types |
NXOpen.UF.UFCamPref | Contains wrappers for all 'UF_CAM_PREF' functions and data types |
NXOpen.UF.UFCamPrepro | Contains wrappers for all 'UF_CAM_PREPRO' functions and data types |
NXOpen.UF.UFCamtext | Contains wrappers for all 'UF_CAMTEXT' functions and data types |
NXOpen.UF.UFCfi | Contains wrappers for all 'UF_CFI' functions and data types |
NXOpen.UF.UFCgm | Contains wrappers for all 'UF_CGM' functions and data types |
NXOpen.UF.UFClear | Contains wrappers for all 'UF_CLEAR' functions and data types |
NXOpen.UF.UFClone | Contains wrappers for all 'UF_CLONE' functions and data types |
NXOpen.UF.UFClsf | Contains wrappers for all 'UF_CLSF' functions and data types |
NXOpen.UF.UFConstants | Contains definitions of constants for use by UF methods |
NXOpen.UF.UFCsys | Contains wrappers for all 'UF_CSYS' functions and data types |
NXOpen.UF.UFCurve | Contains wrappers for all 'UF_CURVE' functions and data types |
NXOpen.UF.UFCurveLineArc | Contains wrappers for all 'UF_CURVE_LINE_ARC' functions and data types |
NXOpen.UF.UFCutLevels | Contains wrappers for all 'UF_CUT_LEVELS' functions and data types |
NXOpen.UF.UFCutter | Contains wrappers for all 'UF_CUTTER' functions and data types |
NXOpen.UF.UFDbcMld | Contains wrappers for all 'UF_DBC_MLD' functions and data types |
NXOpen.UF.UFDie | Contains wrappers for all 'UF_DIE' functions and data types |
NXOpen.UF.UFDieeng | Contains wrappers for all 'UF_DIEENG' functions and data types |
NXOpen.UF.UFDirpath | Contains wrappers for all 'UF_DIRPATH' functions and data types |
NXOpen.UF.UFDisp | Contains wrappers for all 'UF_DISP' functions and data types |
NXOpen.UF.UFDpud | Contains wrappers for all 'UF_DPUD' functions and data types |
NXOpen.UF.UFDraw | Contains wrappers for all 'UF_DRAW' functions and data types |
NXOpen.UF.UFDrf | Contains wrappers for all 'UF_DRF' functions and data types |
NXOpen.UF.UFDrpos | Contains wrappers for all 'UF_DRPOS' functions and data types |
NXOpen.UF.UFEval | Contains wrappers for all 'UF_EVAL' functions and data types |
NXOpen.UF.UFEvalsf | Contains wrappers for all 'UF_EVALSF' functions and data types |
NXOpen.UF.UFFacet | Contains wrappers for all 'UF_FACET' functions and data types |
NXOpen.UF.UFFam | Contains wrappers for all 'UF_FAM' functions and data types |
NXOpen.UF.UFFbmGeom | Contains wrappers for all 'UF_FBM_GEOM' functions and data types |
NXOpen.UF.UFFltr | Contains wrappers for all 'UF_FLTR' functions and data types |
NXOpen.UF.UFForgeo | Contains wrappers for all 'UF_FORGEO' functions and data types |
NXOpen.UF.UFGdt | Contains wrappers for all 'UF_GDT' functions and data types |
NXOpen.UF.UFGexp | Contains wrappers for all 'UF_GEXP' functions and data types |
NXOpen.UF.UFGroup | Contains wrappers for all 'UF_GROUP' functions and data types |
NXOpen.UF.UFHelp | Contains wrappers for all 'UF_HELP' functions and data types |
NXOpen.UF.UFHmop | Contains wrappers for all 'UF_HMOP' functions and data types |
NXOpen.UF.UFKf | Contains wrappers for all 'UF_KF' functions and data types |
NXOpen.UF.UFKfUgmgr | Contains wrappers for all 'UF_KF_UGMGR' functions and data types |
NXOpen.UF.UFLayer | Contains wrappers for all 'UF_LAYER' functions and data types |
NXOpen.UF.UFLib | Contains wrappers for all 'UF_LIB' functions and data types |
NXOpen.UF.UFMb | Contains wrappers for all 'UF_MB' functions and data types |
NXOpen.UF.UFMct | Contains wrappers for all 'UF_MCT' functions and data types |
NXOpen.UF.UFMech | Contains wrappers for all 'UF_MECH' functions and data types |
NXOpen.UF.UFMfm | Contains wrappers for all 'UF_MFM' functions and data types |
NXOpen.UF.UFMisc | Contains wrappers for all 'UF_MISC' functions and data types |
NXOpen.UF.UFModl | Contains wrappers for all 'UF_MODL' functions and data types |
NXOpen.UF.UFModlSweep | Contains wrappers for all 'UF_MODL_SWEEP' functions and data types |
NXOpen.UF.UFModlTrex | Contains wrappers for all 'UF_MODL_TREX' functions and data types |
NXOpen.UF.UFMom | Contains wrappers for all 'UF_MOM' functions and data types |
NXOpen.UF.UFMotion | Contains wrappers for all 'UF_MOTION' functions and data types |
NXOpen.UF.UFMsao | Contains wrappers for all 'UF_MSAO' functions and data types |
NXOpen.UF.UFMtx2 | Contains wrappers for all 'UF_MTX2' functions and data types |
NXOpen.UF.UFMtx3 | Contains wrappers for all 'UF_MTX3' functions and data types |
NXOpen.UF.UFMtx4 | Contains wrappers for all 'UF_MTX4' functions and data types |
NXOpen.UF.UFNcgeom | Contains wrappers for all 'UF_NCGEOM' functions and data types |
NXOpen.UF.UFNcgroup | Contains wrappers for all 'UF_NCGROUP' functions and data types |
NXOpen.UF.UFNcmthd | Contains wrappers for all 'UF_NCMTHD' functions and data types |
NXOpen.UF.UFNcprog | Contains wrappers for all 'UF_NCPROG' functions and data types |
NXOpen.UF.UFNx2d | Contains wrappers for all 'UF_NX2D' functions and data types |
NXOpen.UF.UFObj | Contains wrappers for all 'UF_OBJ' functions and data types |
NXOpen.UF.UFOper | Contains wrappers for all 'UF_OPER' functions and data types |
NXOpen.UF.UFOprbnd | Contains wrappers for all 'UF_OPRBND' functions and data types |
NXOpen.UF.UFParam | Contains wrappers for all 'UF_PARAM' functions and data types |
NXOpen.UF.UFPart | Contains wrappers for all 'UF_PART' functions and data types |
NXOpen.UF.UFPath | Contains wrappers for all 'UF_PATH' functions and data types |
NXOpen.UF.UFPatt | Contains wrappers for all 'UF_PATT' functions and data types |
NXOpen.UF.UFPd | Contains wrappers for all 'UF_PD' functions and data types |
NXOpen.UF.UFPlist | Contains wrappers for all 'UF_PLIST' functions and data types |
NXOpen.UF.UFPlot | Contains wrappers for all 'UF_PLOT' functions and data types |
NXOpen.UF.UFPoint | Contains wrappers for all 'UF_POINT' functions and data types |
NXOpen.UF.UFProcessAid | Contains wrappers for all 'UF_PROCESS_AID' functions and data types |
NXOpen.UF.UFPs | Contains wrappers for all 'UF_PS' functions and data types |
NXOpen.UF.UFRoute | Contains wrappers for all 'UF_ROUTE' functions and data types |
NXOpen.UF.UFRouteRun | Contains wrappers for all 'UF_ROUTE_RUN' functions and data types |
NXOpen.UF.UFRule | Contains wrappers for all 'UF_RULE' functions and data types |
NXOpen.UF.UFScop | Contains wrappers for all 'UF_SCOP' functions and data types |
NXOpen.UF.UFSetup | Contains wrappers for all 'UF_SETUP' functions and data types |
NXOpen.UF.UFSf | Contains wrappers for all 'UF_SF' functions and data types |
NXOpen.UF.UFSfCurve | Contains wrappers for all 'UF_SF_CURVE' functions and data types |
NXOpen.UF.UFSfl | Contains wrappers for all 'UF_SFL' functions and data types |
NXOpen.UF.UFSfLegend | Contains wrappers for all 'UF_SF_LEGEND' functions and data types |
NXOpen.UF.UFSfPost | Contains wrappers for all 'UF_SF_POST' functions and data types |
NXOpen.UF.UFShopdoc | Contains wrappers for all 'UF_SHOPDOC' functions and data types |
NXOpen.UF.UFSim | Contains wrappers for all 'UF_SIM' functions and data types |
NXOpen.UF.UFSket | Contains wrappers for all 'UF_SKET' functions and data types |
NXOpen.UF.UFSmd | Contains wrappers for all 'UF_SMD' functions and data types |
NXOpen.UF.UFSo | Contains wrappers for all 'UF_SO' functions and data types |
NXOpen.UF.UFStd | Contains wrappers for all 'UF_STD' functions and data types |
NXOpen.UF.UFStudio | Contains wrappers for all 'UF_STUDIO' functions and data types |
NXOpen.UF.UFStyler | Contains wrappers for all 'UF_STYLER' functions and data types |
NXOpen.UF.UFSubdiv | Contains wrappers for all 'UF_SUBDIV' functions and data types |
NXOpen.UF.UFSurfReg | Contains wrappers for all 'UF_SURF_REG' functions and data types |
NXOpen.UF.UFTabnot | Contains wrappers for all 'UF_TABNOT' functions and data types |
NXOpen.UF.UFTabnotF | Contains wrappers for all 'UF_TABNOT_F' functions and data types |
NXOpen.UF.UFTag | Contains wrappers for all 'UF_TAG' functions and data types |
NXOpen.UF.UFText | Contains wrappers for all 'UF_TEXT' functions and data types |
NXOpen.UF.UFTrns | Contains wrappers for all 'UF_TRNS' functions and data types |
NXOpen.UF.UFTurn | Contains wrappers for all 'UF_TURN' functions and data types |
NXOpen.UF.UFUde | Contains wrappers for all 'UF_UDE' functions and data types |
NXOpen.UF.UFUdobj | Contains wrappers for all 'UF_UDOBJ' functions and data types |
NXOpen.UF.UFUdop | Contains wrappers for all 'UF_UDOP' functions and data types |
NXOpen.UF.UFUgfont | Contains wrappers for all 'UF_UGFONT' functions and data types |
NXOpen.UF.UFUgmgr | Contains wrappers for all 'UF_UGMGR' functions and data types |
NXOpen.UF.UFUgmgrKf | Contains wrappers for all 'UF_UGMGR_KF' functions and data types |
NXOpen.UF.UFUi | Contains wrappers for all 'UF_UI' functions and data types |
NXOpen.UF.UFUiOnt | Contains wrappers for all 'UF_UI_ONT' functions and data types |
NXOpen.UF.UFUiParam | Contains wrappers for all 'UF_UI_PARAM' functions and data types |
NXOpen.UF.UFUndo | Contains wrappers for all 'UF_UNDO' functions and data types |
NXOpen.UF.UFUnit | Contains wrappers for all 'UF_UNIT' functions and data types |
NXOpen.UF.UFVec2 | Contains wrappers for all 'UF_VEC2' functions and data types |
NXOpen.UF.UFVec3 | Contains wrappers for all 'UF_VEC3' functions and data types |
NXOpen.UF.UFVec4 | Contains wrappers for all 'UF_VEC4' functions and data types |
NXOpen.UF.UFView | Contains wrappers for all 'UF_VIEW' functions and data types |
NXOpen.UF.UFWave | Contains wrappers for all 'UF_WAVE' functions and data types |
NXOpen.UF.UFWeb | Contains wrappers for all 'UF_WEB' functions and data types |
NXOpen.UF.UFWeight | Contains wrappers for all 'UF_WEIGHT' functions and data types |
NXOpen.UF.UFWeld | Contains wrappers for all 'UF_WELD' functions and data types |
NXOpen.UF.UFXs | Contains wrappers for all 'UF_XS' functions and data types |
NXOpen.UIStyler.Styler | Represents a Uistyler for UI Styler |
NXOpen.Update | Provides methods for update and delete |
NXOpen.UserDefinedObjects.UserDefinedClassManager | JA interface for the UserDefinedClassManager object |
NXOpen.UserDefinedObjects.UserDefinedObjectManager | This class creates and manages UserDefinedObjects |
NXOpen.Validate.ValidationManager | Represents an object that manages validator and parser associated instance objects |
NXOpen.Validate.XmlComparator | Provides a generic comparator for finding differences between two XML format files |
NXOpen.ViewDependentDisplayManager | Represents all view dependent display operations |
NXOpen.ViewUIManager | |
NXOpen.VisualReporting.VisualReportExplorer | The Explorer of the results of a visual report |
NXOpen.VisualReporting.VisualReportManager | A manager for load, creation and activation of visual reports |
NXOpen.WCS | Represents the World Coordinate System |
NXOpen.Weld.WeldCpdUtils | Provides methods for access a WeldCpdUtils class object in NX |
NXOpen.UF.UFDrf.Object | Wrapper for UF_DRF_object_s |
NXOpen.UF.UFBound.Object | Wrapper for UF_BOUND_object_s |
NXOpen.UF.UFDrf.ObjectAssocData | Wrapper for UF_DRF_object_assoc_data_s |
NXOpen.Features.FlatPattern.ObjectDataCsys | Structure used to return data about objects in the flat pattern |
NXOpen.Features.FlatSolid.ObjectDataCsys | Structure used to return the objects of a flat solid |
NXOpen.Features.FlatPattern.ObjectDataEdge | Structure used to return data about objects in the flat pattern |
NXOpen.Features.FlatPattern.ObjectDataFace | Structure used to return data about objects in the flat pattern |
NXOpen.Features.FlatPattern.ObjectDataGeneral | Structure used to return data about objects in the flat pattern |
NXOpen.Features.Subdivision.CageManipulatorData.ObjectMoveData | Contains object movement information |
NXOpen.Features.Subdivision.CageManipulatorData.ObjectSelectionData | Contains object selection information |
NXOpen.UF.UFCurve.OcfData | Wrapper for UF_CURVE_ocf_data_s |
NXOpen.UF.UFCurve.OcfFaceData | Wrapper for UF_CURVE_ocf_face_data_s |
NXOpen.UF.UFCurve.OcfStringData | Wrapper for UF_CURVE_ocf_string_data_s |
NXOpen.UF.UFCurve.OcfValues | Wrapper for UF_CURVE_ocf_values_s |
NXOpen.CAE.BeamSectionOffsetOptions.Offset | Represents the offset value |
NXOpen.UF.UFSo.OffsetCurveCvtrData | Wrapper for UF_SO_offset_curve_cvtr_data_s |
NXOpen.UF.UFSo.OffsetSurfCvtrData | Wrapper for UF_SO_offset_surf_cvtr_data_s |
NXOpen.Optimization.OptimizationBuilder.OptimizationConstraint | Defined constraint structure |
NXOpen.Optimization.OptimizationBuilder.OptimizationObjective | Defined Objective Structure |
NXOpen.Optimization.OptimizationBuilder.OptimizationVariable | Defined variable structure |
NXOpen.UF.UFAssem.Options | Wrapper for UF_ASSEM_options_s |
NXOpen.Validate.XmlComparator.Options | |
NXOpen.UF.UFBrep.Options | Wrapper for UF_BREP_options_s |
NXOpen.UF.UFDrf.OrddispInfo | Wrapper for UF_DRF_orddisp_info_s |
NXOpen.UF.UFSf.OrientationData | Wrapper for UF_SF_orientation_data_s |
NXOpen.Preferences.PartVisualizationEmphasis.OriginalColorShellOptions | Specifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Original Color Shell |
NXOpen.UF.UFEval.Parabola | Wrapper for UF_EVAL_parabola_s |
NXOpen.Mechatronics.LogicObjectBuilder.ParameterData | Defined Parameter Data Structure |
NXOpen.Mechatronics.SensorsActuatorsListBuilder.ParameterData | Defines the parameter data |
NXOpen.Mechatronics.SignalAdapterBuilder.ParameterData | Defines the parameter data |
NXOpen.Mechatronics.FunctionObjectBuilder.ParameterData | Defined Parameter Data Structure |
NXOpen.RuleManager.ParameterRule | Used to specify parameter values for child rule creation or modification |
NXOpen.UF.UFFacet.Parameters | Wrapper for UF_FACET_parameters_s |
NXOpen.UF.UFModl.ParentDispInfo | Wrapper for UF_MODL_parent_disp_info_s |
NXOpen.Part.PartFamilyAttributeData | Contains part family attributes information |
NXOpen.UF.UFUgmgr.PartFileInfo | Wrapper for UF_UGMGR_part_file_info_s |
NXOpen.PDM.PartBuilder.PartFileNameData | Contains part file name information |
NXOpen.UF.UFUgmgr.PartFileObject | Wrapper for UF_UGMGR_part_file_object_s |
NXOpen.PDM.PartBuilder.PartNumberData | Contains part number information |
NXOpen.PDM.PartBuilder.PartRevisionData | Contains part revision information |
NXOpen.UF.UFSmd.PipNodeData | Wrapper for UF_SMD_pip_node_data_s |
NXOpen.Preferences.PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveTypeDisplayData | The members of the following structure are the display data |
NXOpen.JournalManager.PlayDotNetJournalInformation | This structure contains information from playing the DotNet Journal |
NXOpen.UF.UFGdt.Point | Wrapper for UF_GDT_point_s |
NXOpen.Point2d | Represents two-dimensional cartesian coordinates for a point |
NXOpen.Point3d | Represents three-dimensional cartesian coordinates for a point |
NXOpen.Point4d | Represents four-dimensional homogeneous coordinates for a point |
NXOpen.UF.UFMotion.PointCurveConstraint | Wrapper for UF_MOTION_point_curve_constraint_s |
NXOpen.UF.UFMotion.PointOnSurfaceData | Wrapper for UF_MOTION_point_on_surface_data_s |
NXOpen.Preferences.WorkPlane.PolarGridSize | Polar grid size parameters |
NXOpen.UF.UFEvalsf.Pos3 | Wrapper for UF_EVALSF_pos3_s |
NXOpen.CAE.PostScenarioModeDescription | Mode description |
NXOpen.UF.UFClear.Pref | Wrapper for UF_CLEAR_pref_s |
NXOpen.UF.UFCam.Preferences | Wrapper for UF_CAM_preferences_s |
NXOpen.UF.UFPlist.Prefs | Wrapper for UF_PLIST_prefs_s |
NXOpen.UF.UFAssem.Prev16Align | Wrapper for UF_ASSEM_prev16_align_s |
NXOpen.CAE.Post.PrimaryEdgeFace | Edge and Face Fill display settings |
NXOpen.UF.UFPlot.PrinterGroup | Wrapper for UF_PLOT_printer_group_s |
NXOpen.UF.UFGdt.ProductAttribute | Wrapper for UF_GDT_product_attribute_s |
NXOpen.UF.UFPd.ProductAttribute | Wrapper for UF_PD_product_attribute_s |
NXOpen.UF.UFPd.ProductAttribute2 | Wrapper for UF_PD_product_attribute_2_s |
NXOpen.UF.UFPd.ProductDefinition | Wrapper for UF_PD_product_definition_s |
NXOpen.UF.UFCurve.Proj | Wrapper for UF_CURVE_proj_s |
NXOpen.UF.UFCurve.Proj1 | Wrapper for UF_CURVE_proj1_s |
NXOpen.UF.UFGdt.ProjZone | Wrapper for UF_GDT_proj_zone_s |
NXOpen.UF.UFWeight.Properties | Wrapper for UF_WEIGHT_properties_s |
NXOpen.CAE.BeamSection.Properties | Represents the properties of the beam section |
NXOpen.UF.UFUgmgr.PropertyInfo | Wrapper for UF_UGMGR_property_info_s |
NXOpen.UF.UFCurve.PtSlopeCrvatr | Wrapper for UF_CURVE_pt_slope_crvatr_s |
NXOpen.UF.UFModl.RayHitPointInfo | Wrapper for UF_MODL_ray_hit_point_info_s |
NXOpen.UF.UFModl.ReblendFace | Wrapper for UF_MODL_reblend_face_s |
NXOpen.UF.UFModl.ReblendFaceData | Wrapper for UF_MODL_reblend_face_data_s |
NXOpen.UF.UFMfm.RecognizeOptions | Wrapper for UF_MFM_recognize_options_s |
NXOpen.CAE.CorrelAlignmentBuilder.ReferencePt | Specifies the data for the selected reference points |
NXOpen.UF.UFModl.RefitFaceData | Wrapper for UF_MODL_refit_face_data_s |
NXOpen.UF.UFModl.RefitFaceTargetData | Wrapper for UF_MODL_refit_face_target_data_s |
NXOpen.UF.UFDraw.RenderPrefs | Wrapper for UF_DRAW_render_prefs_s |
NXOpen.UF.UFDrf.RenderTable | Wrapper for UF_DRF_render_table_s |
NXOpen.UF.UFModl.ReplaceFeaturesStruct | Wrapper for UF_MODL_replace_features_t |
NXOpen.Mechatronics.FunctionObjectBuilder.RequirementData | Defined Requirement Data Structure |
NXOpen.CAE.Result.ResultBasicUnit | The basic units system for a result |
NXOpen.UF.UFSf.ResultingFacePairs | Wrapper for UF_SF_resulting_face_pairs_s |
NXOpen.CAE.Result.ResultParameters | Result parameter structure to specify complete result state for the color display This structure has been replaced by NXOpen.CAE.ResultParameters |
NXOpen.CAE.Result.ResultSection | Result Section structure to specify a result section for beams and shells |
NXOpen.NXColor.Rgb | RGB values |
NXOpen.UF.UFModl.RipedgeData | Wrapper for UF_MODL_ripedge_data_s |
NXOpen.UF.UFPath.Rotate | Wrapper for UF_PATH_rotate_s |
NXOpen.UF.UFModl.RoughOffset | Wrapper for UF_MODL_rough_offset_s |
NXOpen.UF.UFUgmgr.SaveasDatasetInfo | Wrapper for UF_UGMGR_saveas_dataset_info_s |
NXOpen.UF.UFUgmgr.SaveasDatasetName | Wrapper for UF_UGMGR_saveas_dataset_name_s |
NXOpen.UF.UFMotion.ScalarForceTorque | Wrapper for UF_MOTION_scalar_force_torque_s |
NXOpen.UF.ScSectionOutputData | Wrapper for UF_SC_section_output_data_s |
NXOpen.Routing.RouteManager.SearchCriteria | Fill in this information with as much as you know about the object you want to find |
NXOpen.UF.UFCurve.SectionGeneralData | Wrapper for UF_CURVE_section_general_data_s |
NXOpen.UF.UFCurve.SectionParallelData | Wrapper for UF_CURVE_section_parallel_data_s |
NXOpen.UF.UFCurve.SectionPerpcrvData | Wrapper for UF_CURVE_section_perpcrv_data_s |
NXOpen.UF.UFCurve.SectionPlanesData | Wrapper for UF_CURVE_section_planes_data_s |
NXOpen.UF.UFTabnot.SectionPrefs | Wrapper for UF_TABNOT_section_prefs_s |
NXOpen.UF.UFCurve.SectionRadialData | Wrapper for UF_CURVE_section_radial_data_s |
NXOpen.Routing.BendReportManager.SegmentInformation | Used by all the reports to hold the information of the segments under port, solid body, segment, stock, stock component, or feature representing the piece of stock |
NXOpen.Selection.SelectionDescriptor | For a rectangle deselection, the fields Deselection , MultipleSelection , Rectangle bits would be set |
NXOpen.UF.UFUi.SelectionOption | Wrapper for UF_UI_selection_option_s |
NXOpen.UF.UFSmd.SeqInput | Wrapper for UF_SMD_seq_input_s |
NXOpen.UF.UFSmd.SeqOutput | Wrapper for UF_SMD_seq_output_s |
NXOpen.CAE.SetObject | Structure used to pass objects into SetManager and CAESet |
NXOpen.UF.SfColorAttr | Wrapper for UF_SF_COLOR_attr_s |
NXOpen.UF.UFModl.SflangeData | Wrapper for UF_MODL_sflange_data_s |
NXOpen.UF.SfLegendAttr | Wrapper for UF_SF_LEGEND_attr_s |
NXOpen.UF.SfLegendIndexAttr | Wrapper for UF_SF_LEGEND_index_attr_s |
NXOpen.UF.SfLegendIndexColorAttr | Wrapper for UF_SF_LEGEND_index_color_attr_s |
NXOpen.UF.SfLegendIndexTextAttr | Wrapper for UF_SF_LEGEND_index_text_attr_s |
NXOpen.UF.SfLegendTitle | Wrapper for UF_SF_LEGEND_title_s |
NXOpen.UF.UFView.ShadedEdgeOptions | Wrapper for UF_VIEW_shaded_edge_options_s |
NXOpen.UF.UFDisp.ShadeOptions | Wrapper for UF_DISP_shade_options_s |
NXOpen.UF.UFModl.ShapePatternClientDialogData | Wrapper for UF_MODL_shape_pattern_client_dialog_data_s |
NXOpen.Features.SheetMetal.SheetmetalBendParameters | This structure contains the bend parameters for a Sheet Metal bend area |
NXOpen.Preferences.PartVisualizationEmphasis.ShellOptions | Specifies options that control the appearance of de-emphasized shaded geometry when the See-Thru style is set to Shell |
NXOpen.Mechatronics.SHMSignalClientBuilder.SHMInfo | Represents SHMInstance info definition structure |
NXOpen.Mechatronics.SHMSignalClientBuilder.SHMSignal | Represents SHMTag info definition structure |
NXOpen.Mechatronics.SignalBuilder.Signal | Represents Signal definition structure |
NXOpen.Mechatronics.TCPClientBuilder.Signal | Represents TCP signal definition structure |
NXOpen.Mechatronics.TCPSignalServerBuilder.Signal | Represents the data type |
NXOpen.Mechatronics.UDPSignalServerBuilder.Signal | Represents the data type |
NXOpen.Mechatronics.UDPSignalClientBuilder.Signal | Represents the data type |
NXOpen.Mechatronics.MATLABClientBuilder.SignalData | Defines the signal data |
NXOpen.Mechatronics.SignalAdapterBuilder.SignalData | Defines the signal data |
NXOpen.Mechatronics.SHMSignalProviderBuilder.SignalInfo | Represents SHMProviderSignal info definition structure |
NXOpen.UF.UFModl.SimplData | Wrapper for UF_MODL_simpl_data_s |
NXOpen.UF.UFCgm.Size | Wrapper for UF_CGM_size_s |
NXOpen.Diagramming.Tables.SizedSymbol | Represents sized symbol information |
NXOpen.UF.UFGdt.SizeTolerance | Wrapper for UF_GDT_size_tolerance_s |
NXOpen.Mechatronics.ExpressionBlockBuilder.Slot | Represents Slot definition structure |
NXOpen.UF.UFModl.SmbendCornerData | Wrapper for UF_MODL_smbend_corner_data_s |
NXOpen.UF.UFModl.SmbendCylinderData | Wrapper for UF_MODL_smbend_cylinder_data_s |
NXOpen.UF.UFModl.SmbendData | Wrapper for UF_MODL_smbend_data_s |
NXOpen.UF.UFModl.SmcornerData | Wrapper for UF_MODL_smcorner_data_s |
NXOpen.UF.UFModl.SmcutoutData | Wrapper for UF_MODL_smcutout_data_s |
NXOpen.UF.UFModl.SmholeData | Wrapper for UF_MODL_smhole_data_s |
NXOpen.UF.UFModl.SmjoggleData | Wrapper for UF_MODL_smjoggle_data_s |
NXOpen.UF.UFModl.SmpunchCutSets | Wrapper for UF_MODL_smpunch_cut_sets_s |
NXOpen.UF.UFModl.SmpunchData | Wrapper for UF_MODL_smpunch_data_s |
NXOpen.UF.UFModl.SmreliefData | Wrapper for UF_MODL_smrelief_data_s |
NXOpen.UF.UFModl.SmslotData | Wrapper for UF_MODL_smslot_data_s |
NXOpen.UF.UFModl.SnipsrfFeatureData | Wrapper for UF_MODL_snipsrf_feature_data_s |
NXOpen.UF.UFModl.SolidPunchData | Wrapper for UF_MODL_solid_punch_data_s |
NXOpen.UF.UFMotion.SolverParameters | Wrapper for UF_MOTION_solver_parameters_s |
NXOpen.UF.UFTabnot.SortData | Wrapper for UF_TABNOT_sort_data_s |
NXOpen.UF.UFPath.SpindleOn | Wrapper for UF_PATH_spindle_on_s |
NXOpen.UF.UFCurve.Spline | Wrapper for UF_CURVE_spline_s |
NXOpen.UF.UFEval.Spline | Wrapper for UF_EVAL_spline_s |
NXOpen.UF.UFSo.SplineData | Wrapper for UF_SO_spline_data_s |
NXOpen.UF.SplineFit | Wrapper for SPLINE_FIT_s |
NXOpen.UF.UFWeld.SpotData | Wrapper for UF_WELD_spot_data_s |
NXOpen.UF.UFWeld.SpotFaceLoc | Wrapper for UF_WELD_spot_face_loc_s |
NXOpen.UF.UFWeld.SpotFaceLocation | Wrapper for UF_WELD_spot_face_location_s |
NXOpen.UF.UFWeld.SpotInfo | Wrapper for UF_WELD_spot_info_s |
NXOpen.UF.UFMotion.SpringDamper | Wrapper for UF_MOTION_spring_damper_s |
NXOpen.UF.UFDisp.SrfanlData | Wrapper for UF_DISP_srfanl_data_s |
NXOpen.UF.UFCurve.State | Wrapper for UF_CURVE_state_s |
NXOpen.UF.UFModl.StateInfo | Wrapper for UF_MODL_state_info_s |
NXOpen.Layer.StateInfo | Used in several methods that get or set the state of a layer |
NXOpen.UF.UFGdt.StatisticalInfo | Wrapper for UF_GDT_statistical_info_s |
NXOpen.UF.UFOper.Status | Wrapper for UF_OPER_status_s |
NXOpen.UF.UFOper.Status1 | Wrapper for UF_OPER_status1_s |
NXOpen.UF.UFLayer.StatusInfo | Wrapper for UF_LAYER_status_info_s |
NXOpen.CAE.IMeshManager.StatusInfo | Contains status information |
NXOpen.UF.UFStd.StlError | Wrapper for UF_STD_stl_error_s |
NXOpen.UF.UFMotion.StlParameters | Wrapper for UF_MOTION_stl_parameters_s |
NXOpen.UF.UFStd.StlParams | Wrapper for UF_STD_stl_params_s |
NXOpen.CAE.Post.Streamline | Streamline display settings |
NXOpen.CAE.Post.StreamlineData | Streamline data extraction parameters |
NXOpen.CAE.Post.StreamlineExtraction | Streamline extraction parameters |
NXOpen.CAE.Post.StreamlineSeed | Streamline seed point definition |
NXOpen.UF.StringList | Wrapper for string_list |
NXOpen.UF.UFDrf.StrokeInfo | Wrapper for UF_DRF_stroke_info_s |
NXOpen.UF.UFCurve.Struct | Wrapper for UF_CURVE_struct_s |
NXOpen.UF.UFStudio.StybldCurveTrans | Wrapper for UF_STUDIO_stybld_curve_trans_s |
NXOpen.UF.UFStudio.StybldData | Wrapper for UF_STUDIO_stybld_data_s |
NXOpen.UF.UFStudio.StybldShapeTrans | Wrapper for UF_STUDIO_stybld_shape_trans_s |
NXOpen.UF.UFModl.StycornerCrvOpt | Wrapper for UF_MODL_stycorner_crv_opt_s |
NXOpen.UF.UFModl.StycornerData | Wrapper for UF_MODL_stycorner_data_s |
NXOpen.UF.UFModl.StyledSweepData | Wrapper for UF_MODL_styled_sweep_data_s |
NXOpen.Routing.SegmentManager.SubdivideOption | Contains subdivide segment method information |
NXOpen.Assemblies.ClearanceSet.Summary | Summary of the most recent Clearance Analysis results |
NXOpen.UF.UFClear.Summary | Wrapper for UF_CLEAR_summary_s |
NXOpen.Preferences.ViewVisualizationVisual.SurfaceDisplayOptions | Describes the appearance of edges and silhouettes in the view |
NXOpen.UF.UFGdt.SurfaceParms | Wrapper for UF_GDT_surface_parms_s |
NXOpen.UF.UFDraw.SxlineSxsegs | Wrapper for UF_DRAW_sxline_sxsegs_s |
NXOpen.UF.UFDraw.SxsegInfo | Wrapper for UF_DRAW_sxseg_info_s |
NXOpen.UF.UFDraw.SxviewPrfs | Wrapper for UF_DRAW_sxview_prfs_s |
NXOpen.Mechatronics.SymbolTableBuilder.Symbol | Represents Symbol definition structure |
NXOpen.UF.UFDrf.SymbolConnection | Wrapper for UF_DRF_symbol_connection_s |
NXOpen.UF.UFDrf.SymbolCreateData | Wrapper for UF_DRF_symbol_create_data_s |
NXOpen.UF.UFDrf.SymbolData | Wrapper for UF_DRF_symbol_data_s |
NXOpen.UF.UFDrf.SymbolInstance | Wrapper for UF_DRF_symbol_instance_s |
NXOpen.UF.UFDrf.SymbolPreferences | Wrapper for UF_DRF_symbol_preferences_s |
NXOpen.UF.UFModl.SymbThreadData | Wrapper for UF_MODL_symb_thread_data_s |
NXOpen.UF.SystemInfo | Wrapper for UF_system_info_s |
NXOpen.UF.UFDisp.SystemParams | Wrapper for UF_DISP_system_params_s |
NXOpen.Preferences.PartSheetmetal.TabCurveTypeDisplayData | The members of the following structure are the display data of a tab curve type |
NXOpen.UF.UFDraw.TabnotCell | Wrapper for UF_DRAW_tabnot_cell_s |
NXOpen.UF.UFDraw.TabnotCellEvalData | Wrapper for UF_DRAW_tabnot_cell_eval_data_s |
NXOpen.UF.UFDraw.TabnotCellParams | Wrapper for UF_DRAW_tabnot_cell_params_s |
NXOpen.UF.UFDraw.TabnotEvalData | Wrapper for UF_DRAW_tabnot_eval_data_s |
NXOpen.UF.UFDraw.TabnotLine | Wrapper for UF_DRAW_tabnot_line_s |
NXOpen.UF.UFDraw.TabnotParams | Wrapper for UF_DRAW_tabnot_params_s |
NXOpen.Mechatronics.OPCClientBuilder.TagAttribute | the attribute of OPC item |
NXOpen.Mechatronics.MATLABClientBuilder.TagAttribute | the attribute of MATLAB item |
TaggedObject | |
NXOpen.AME.BasicPropertiesBuilder | Represents a re-usable component for basic properties such as name and description |
NXOpen.AME.ConditionsBuilder | JA class for the conditions dialog |
NXOpen.AME.DB.DocumentStructure | Class to define Document Structure object |
NXOpen.AME.EngineeringObjectAspectDetailBuilder | JA class for the Engineering Object Aspect Detail UI block |
NXOpen.AME.EngineeringObjectNameBuilder | JA class for the Engineering Object and Engineering Object def name and description superclass UI block |
NXOpen.AME.InsertSettingsBuilder | Re-usable UI for Settings properties in Insert EO and Insert Template dialog |
NXOpen.AME.NamingRuleBuilderList | Represents a list of objects |
NXOpen.AME.NamingRuleListBuilder | Classification to Engineering Object Name Map Builder |
NXOpen.AME.ObjectConnectionBuilder | JA class for the reuse object connection block |
NXOpen.AME.ObjectConnectionDetailBuilder | JA class for the reuse object connection detail block |
NXOpen.AME.ObjectNameBuilder | Object Name JA class |
NXOpen.AME.ObjectNameIndexBuilder | Object Name Index JA class |
NXOpen.AME.ReferenceObjectBuilder | Re-usable UI consist of a context and source selection |
NXOpen.AME.SelectAMEBaseNode | Represents a single object selection |
NXOpen.AME.SelectAMEBaseNodeList | Represents a list of objects on a selection list |
NXOpen.AME.SelectAMEExtendedObject | Represents a single object selection |
NXOpen.AME.SelectAMEPort | Represents a single object selection |
NXOpen.AME.SelectAspectNode | Represents a single object selection |
NXOpen.AME.SelectionBaseDefinitionBuilder | Journalling Interface class for Builder which allows selection of BaseDefinition |
NXOpen.AME.SelectionEngineeringObjectDefinitionBuilder | JA class for the Engineering Object Definition Block |
NXOpen.AME.SelectProductDefinitionBuilder | JA class for the Product Definition Selection |
NXOpen.AME.SelectProductOrEoDefinitionBuilder | JA class for the Product Definition or Engineering Object Definition Selection |
NXOpen.AME.SortingBlockBuilder | Sorts the list expression output according to the property |
NXOpen.AME.TypeMappingBuilderList | Represents a list of objects |
NXOpen.Annotations.AnnotationPlacement | Represents an object that journals the adding of a leader and setting of the origin for dialogs that use a builder |
NXOpen.Annotations.AppendedTextBuilder | This class is used to set/access the appended text of a dimension |
NXOpen.Annotations.ArbitraryAreaSeedBuilder | Represents a NXOpen.Annotations.ArbitraryAreaSeedBuilder |
NXOpen.Annotations.ArbitraryAreaSeedBuilderList | Represents a list of objects |
NXOpen.Annotations.AssociatedObjectsBuilder | The associated objects builder is used to store objects which annotations are associated to |
NXOpen.Annotations.AssociatedObjectsSetsBuilder | The associated objects sets builder is used to store lists of objects which annotations are associated to |
NXOpen.Annotations.BendTableSettingsBuilder | Represents a NXOpen.Annotations.BendTableSettingsBuilder |
NXOpen.Annotations.BillOfMaterialBuilder | Builder for Bill of Material functionality used in Routing |
NXOpen.Annotations.BoundaryBuilder | This builder contains the boundaries that define a crosshatch pattern |
NXOpen.Annotations.BreakSettingsBuilder | Represents a NXOpen.Annotations.BreakSettingsBuilder builder |
NXOpen.Annotations.CenterlineSettingsBuilder | Represents a Builder for Centerline Settings |
NXOpen.Annotations.CommonWorkflowBuilder | Represents a NXOpen.Annotations.CommonWorkflowBuilder |
NXOpen.Annotations.CompoundDatumReferenceBuilder | Represents a NXOpen.Annotations.CompoundDatumReferenceBuilder |
NXOpen.Annotations.CutSheetBuilder | Builder for Formboard cut sheet functionality used in formboard |
NXOpen.Annotations.CuttingPlaneSymbolBuilder | Represents a NXOpen.Annotations.CuttingPlaneSymbolBuilder |
NXOpen.Annotations.DatumReferenceBuilder | Represents a NXOpen.Annotations.DatumReferenceBuilder |
NXOpen.Annotations.DatumReferenceBuilderList | Represents a list of objects |
NXOpen.Annotations.DimensionMeasurementBuilder | Represents a NXOpen.Annotations.DimensionMeasurementBuilder |
NXOpen.Annotations.DimensionSetBuilder | Represents a NXOpen.Annotations.DimensionSetBuilder |
NXOpen.Annotations.DimensionStyleBuilder | Represents a NXOpen.Annotations.DimensionStyleBuilder |
NXOpen.Annotations.DimensionWorkflowBuilder | Represents a Annotations WorkFlowBuilder |
NXOpen.Annotations.DisplayStyleBuilder | Represents a NXOpen.Annotations.DisplayStyleBuilder |
NXOpen.Annotations.DrawingFormatTitleBuilder | Represents a NXOpen.Annotations.DrawingFormatTitleBuilder |
NXOpen.Annotations.DrivingValueBuilder | |
NXOpen.Annotations.FcfDatumReference | Represents a NXOpen.Annotations.FcfDatumReference |
NXOpen.Annotations.FeatureControlFrameData | Represents a NXOpen.Annotations.FeatureControlFrameData |
NXOpen.Annotations.FeatureControlFrameDataBuilder | Represents a FeatureControlFrameDataBuilder |
NXOpen.Annotations.FeatureControlFrameDataBuilderList | Represents a list of objects |
NXOpen.Annotations.FeatureControlFrameIndicatorBuilder | Represents a FcfIndicatorBuilder |
NXOpen.Annotations.FeatureControlFrameIndicatorBuilderList | Represents a list of objects |
NXOpen.Annotations.ForeshorteningSymbolBuilder | Represents a NXOpen.Annotations.ForeshorteningSymbolBuilder builder |
NXOpen.Annotations.ForeshorteningSymbolSettingsBuilder | Represents a NXOpen.Annotations.ForeshorteningSymbolSettingsBuilder builder |
NXOpen.Annotations.FrameBarElementStyleBuilder | Represents a NXOpen.Annotations.FrameBarElementStyleBuilder |
NXOpen.Annotations.FrameBarStyleBuilder | Represents a NXOpen.Annotations.FrameBarStyleBuilder |
NXOpen.Annotations.HatchFillSettingsBuilder | This class is used to construct the Crosshatch and area Fill setting block |
NXOpen.Annotations.HatchStyleBuilder | Represents a NXOpen.Annotations.HatchStyleBuilder |
NXOpen.Annotations.HoleCalloutSettingsBuilder | Represents a NXOpen.Annotations.HoleCalloutSettingsBuilder , this builder contains list(s) of parameter(s) for feature(s) |
NXOpen.Annotations.HoleTableSettingsContentBuilder | Represents a NXOpen.Annotations.HoleTableSettingsContentBuilder |
NXOpen.Annotations.HoleTableSettingsFormatBuilder | Represents a NXOpen.Annotations.HoleTableSettingsFormatBuilder |
NXOpen.Annotations.HoleTableSettingsHoleFiltersBuilder | Represents a NXOpen.Annotations.HoleTableSettingsHoleFiltersBuilder |
NXOpen.Annotations.HoleTableSettingsLabelBuilder | Represents a NXOpen.Annotations.HoleTableSettingsLabelBuilder |
NXOpen.Annotations.LeaderBuilder | Represents a NXOpen.Annotations.LeaderBuilder |
NXOpen.Annotations.LeaderData | Represents a NXOpen.Annotations.LeaderData |
NXOpen.Annotations.LeaderDataList | Represents a list of objects |
NXOpen.Annotations.LetteringStyleBuilder | Represents a NXOpen.Annotations.LetteringStyleBuilder |
NXOpen.Annotations.LineArrowStyleBuilder | Represents a NXOpen.Annotations.LineArrowStyleBuilder |
NXOpen.Annotations.LineWeldDataBuilder | Represents a NXOpen.Annotations.LineWeldDataBuilder |
NXOpen.Annotations.MasterCustomSymbol | Represents a custom symbol |
NXOpen.Annotations.MasterSymbolListItemBuilder | Represents a NXOpen.Annotations.MasterSymbolListItemBuilder |
NXOpen.Annotations.MasterSymbolListItemBuilderList | Represents a list of objects |
NXOpen.Annotations.OrdinateBaselineBuilder | Represents a builder for an ordinate baseline |
NXOpen.Annotations.OrdinateStyleBuilder | Represents a NXOpen.Annotations.OrdinateStyleBuilder |
NXOpen.Annotations.OriginBuilder | Represents a NXOpen.Annotations.OriginBuilder |
NXOpen.Annotations.PartsListBuilder | Represents a NXOpen.Annotations.PartsListBuilder |
NXOpen.Annotations.PinListBuilder | Builder for Formboard pin list functionality used in formboard |
NXOpen.Annotations.PlaneBuilder | Represents a NXOpen.Annotations.PlaneBuilder object |
NXOpen.Annotations.RadialStyleBuilder | Represents a NXOpen.Annotations.RadialStyleBuilder |
NXOpen.Annotations.RetainedAnnotationsBuilder | Represents a NXOpen.Annotations.RetainedAnnotationsBuilder |
NXOpen.Annotations.SearchCriteriaCalloutBuilder | Represents SearchCriteriaCalloutBuilder |
NXOpen.Annotations.SelectAnnotation | Represents a single object selection |
NXOpen.Annotations.SelectAnnotationList | Represents a list of objects on a selection list |
NXOpen.Annotations.SelectBaseCustomSymbolList | Represents a list of objects on a selection list |
NXOpen.Annotations.SelectDimension | Represents a single object selection |
NXOpen.Annotations.SelectOrdinateDimensionList | Represents a list of objects on a selection list |
NXOpen.Annotations.SelectTableSectionList | Represents a list of objects on a selection list |
NXOpen.Annotations.ShipDraftingFramebarGeneralBuilder | Represents a NXOpen.Annotations.ShipDraftingFramebarGeneralBuilder |
NXOpen.Annotations.SingleSidedDisplayBuilder | Represents a NXOpen.Annotations.SingleSidedDisplayBuilder |
NXOpen.Annotations.StyleBuilder | Represents a NXOpen.Annotations.StyleBuilder |
NXOpen.Annotations.SymbolCatalogParameterBuilderList | Represents a list of objects |
NXOpen.Annotations.SymbolStyleBuilder | Represents a NXOpen.Annotations.SymbolStyleBuilder |
NXOpen.Annotations.SymbolWorkflowBuilder | Represents a NXOpen.Annotations.SymbolWorkflowBuilder |
NXOpen.Annotations.TableCellStyleBuilder | Represents a NXOpen.Annotations.TableCellStyleBuilder |
NXOpen.Annotations.TableColumnBuilder | Represents a NXOpen.Annotations.TableColumnBuilder |
NXOpen.Annotations.TableSectionStyleBuilder | Represents a NXOpen.Annotations.TableSectionStyleBuilder |
NXOpen.Annotations.TabularNoteStyleBuilder | Represents a NXOpen.Annotations.TabularNoteStyleBuilder |
NXOpen.Annotations.TextWithEditControlsBuilder | Represents a NXOpen.Annotations.TextWithEditControlsBuilder which collects internationalized text strings from the user for processing on an annotation object |
NXOpen.Annotations.TextWithSymbolsBuilder | Represents a NXOpen.Annotations.TextWithSymbolsBuilder which collects internationalized text strings from the user for processing on an annotation object |
NXOpen.Annotations.TitleBlockCellBuilder | Represents a NXOpen.Annotations.TitleBlockCellBuilder |
NXOpen.Annotations.TitleBlockCellBuilderList | Represents a list of objects |
NXOpen.Annotations.UnitsStyleBuilder | Represents a NXOpen.Annotations.UnitsStyleBuilder |
NXOpen.Assemblies.ArrangementsBuilder | Represents an arrangements builder that selects an arrangement |
NXOpen.Assemblies.PartitionList | Represents a list of objects |
NXOpen.Assemblies.SelectComponent | Represents a single object selection |
NXOpen.Assemblies.SelectComponentList | Represents a list of objects on a selection list |
NXOpen.Assemblies.SubsetConfigurationBuilder | A SubsetConfigurationBuilder is used to edit the revision rule and effectivity used to configure the contents of the subset |
NXOpen.BasicEffectivityBuilder | Represent an interface class for basic effectivity block to assign or edit discrete effectivity unit values |
NXOpen.BlockStyler.Node | Represents the node created and utilized by BlockStyler.Tree |
NXOpen.BlockStyler.UIBlock | Represents a UI Block |
NXOpen.BlockStyler.AngularDimension | Represents a Angular Dimension block |
NXOpen.BlockStyler.BodyCollector | Represents a Body Collector block |
NXOpen.BlockStyler.Button | Represents a button |
NXOpen.BlockStyler.ChooseExpression | Represents Choose Expression block |
NXOpen.BlockStyler.CompositeBlock | A composite block is a block that contains other blocks |
NXOpen.BlockStyler.CurveCollector | Represents a Curve Collector |
NXOpen.BlockStyler.DoubleBlock | Represents a Double block |
NXOpen.BlockStyler.DoubleTable | Represents a Double Table block |
NXOpen.BlockStyler.DrawingArea | Represents a Drawing Area block |
NXOpen.BlockStyler.Enumeration | Represents an Enumeration block |
NXOpen.BlockStyler.Explorer | Represents an Explorer block |
NXOpen.BlockStyler.ExpressionBlock | Represents an Expression block |
NXOpen.BlockStyler.FaceCollector | Represents a Face Collector |
NXOpen.BlockStyler.FileSelection | Represents File Selection With Browse block |
NXOpen.BlockStyler.FolderSelection | Represents Folder Selection With Browse block |
NXOpen.BlockStyler.Group | Represents a Group Block |
NXOpen.BlockStyler.IntegerBlock | Represents a Integer block |
NXOpen.BlockStyler.IntegerTable | Represents a Integer Table block |
NXOpen.BlockStyler.Label | Represents a Label |
NXOpen.BlockStyler.LayerBlock | Represents a Layer block |
NXOpen.BlockStyler.LinearDimension | Represents a Linear Dimension block |
NXOpen.BlockStyler.LineColorFontWidth | Represents a Line Width block |
NXOpen.BlockStyler.LineFont | Represents a Line Width block |
NXOpen.BlockStyler.LineWidth | Represents a Line Width block |
NXOpen.BlockStyler.ListBox | Represents a ListBox block |
NXOpen.BlockStyler.Microposition | Represents a Microposition block |
NXOpen.BlockStyler.MultilineString | Represents a Multiline String block |
NXOpen.BlockStyler.ObjectColorPicker | Represents an Object Color Picker Block |
NXOpen.BlockStyler.OnPathDimension | Represents a On Path Dimension block |
NXOpen.BlockStyler.OrientXpress | Represents OrientXpress Block |
NXOpen.BlockStyler.RadiusDimension | Represents a Radius Dimension block |
NXOpen.BlockStyler.ReverseDirection | Represents Reverse Direction block |
NXOpen.BlockStyler.RGBColorPicker | Represents a RGB Color Picker block |
NXOpen.BlockStyler.ScrolledWindow | Represents a Scrolled Window block |
NXOpen.BlockStyler.SectionBuilder | Represents a Section Builder |
NXOpen.BlockStyler.SelectElement | Represents a Select Elements block |
NXOpen.BlockStyler.SelectFacetRegion | Represents a Select Region Selection block |
NXOpen.BlockStyler.SelectFeature | Represents a Select Feature block |
NXOpen.BlockStyler.SelectNode | Represents a Select Node block |
NXOpen.BlockStyler.SelectObject | Represents a Select Object block |
NXOpen.BlockStyler.SelectPartFromList | Represents a Select Part From List block |
NXOpen.BlockStyler.Separator | Represents a Separator block |
NXOpen.BlockStyler.SetList | Represents a SetList block |
NXOpen.BlockStyler.SpecifyAxis | Represents a Specify Axis block |
NXOpen.BlockStyler.SpecifyCSYS | Represents a Specify CSYS block |
NXOpen.BlockStyler.SpecifyLocation | Represents a Specify Location block |
NXOpen.BlockStyler.SpecifyOrientation | Represents Specify Orientation block |
NXOpen.BlockStyler.SpecifyPlane | Represents a Specify Plane block |
NXOpen.BlockStyler.SpecifyPoint | Represents a Specify Point block |
NXOpen.BlockStyler.SpecifyVector | Represents Specify Vector block |
NXOpen.BlockStyler.StringBlock | Represents a String block |
NXOpen.BlockStyler.SuperPoint | Represents a Super Point block |
NXOpen.BlockStyler.SuperSection | Represents a Super Section block |
NXOpen.BlockStyler.TabControl | Represents a Tab Control layout |
NXOpen.BlockStyler.Table | Represents a Table layout |
NXOpen.BlockStyler.TextColorFontWidth | Represents a Line Width block |
NXOpen.BlockStyler.Toggle | Represents a Toggle block |
NXOpen.BlockStyler.Tree | Represents the Tree block in block styler automation |
NXOpen.BlockStyler.Wizard | Represents a Wizard block |
NXOpen.BodyList | Represents a list of objects |
NXOpen.Builder | A Builder is an object that is used to create and edit other objects |
NXOpen.CAE.AlternateFemRepresentationSource | This is the class representing a Alternate Fem Representation Source |
NXOpen.CAE.AtvSet | This is the class representing a Atv result set |
NXOpen.CAE.FrfSet | This is the class representing a FRF set |
NXOpen.CAE.ModeSet | This is the class representing a Mode set |
NXOpen.CAE.AxiSymmetricParameters | Implementation of axi-symmetry utility |
NXOpen.CAE.BaseIteration | This class provides interfaces to query iteration attributes |
NXOpen.CAE.Iteration | Represents iteration present in a NXOpen.CAE.Loadcase |
NXOpen.CAE.BaseLoadcase | This class provides interfaces to query loadcase attributes |
NXOpen.CAE.Loadcase | Represents loadcases present in a NXOpen.CAE.Result |
NXOpen.CAE.BaseResultType | This class provides interfaces to query result type attributes |
NXOpen.CAE.ResultType | This class represents a result type from a result file |
NXOpen.CAE.BoundingVolumePrimitive | Represents a Bounding Volume Primitive class NXOpen.CAE.BoundingVolumePrimitive |
NXOpen.CAE.BoxBoundingVolume | Represents Box Bounding Volume for Selection Recipe |
NXOpen.CAE.CylinderBoundingVolume | Represents Box Bounding Volume for Selection Recipe |
NXOpen.CAE.SphereBoundingVolume | Represents Sphere Bounding Volume for Selection Recipe |
NXOpen.CAE.CaeDOFSetDisplay | Represents a DOF Set display attributes |
NXOpen.CAE.ClippingParameters | This class is worked as a packet of information that can be used to set the clipping parameters of a NXOpen.CAE.Post object |
NXOpen.CAE.CompanionResult | Represents additional results data that will augment a primary set of Analysis results associated to a NXOpen.CAE.SimSolution |
NXOpen.CAE.Connections.ComponentData | Composer connection |
NXOpen.CAE.Connections.Composer | Composer |
NXOpen.CAE.Connections.ComposerData | Composer connection |
NXOpen.CAE.Connections.ConnectionData | Composer connection |
NXOpen.CAE.Connections.ConnectionDBData | Connection DB data |
NXOpen.CAE.Connections.ConnectionDBItemData | Connection DB item data |
NXOpen.CAE.Connections.Location | Location base class |
NXOpen.CAE.Connections.CoordinatesLocation | Location interface |
NXOpen.CAE.Connections.CoordinatesSeriesLocation | Location interface |
NXOpen.CAE.Connections.CurveLocation | Location interface |
NXOpen.CAE.Connections.FeEdgesLocation | Location interface |
NXOpen.CAE.Connections.LocationWithDir | Location With Direction interface |
NXOpen.CAE.Connections.NodeLocation | Location interface |
NXOpen.CAE.Connections.NodeSeriesLocation | Location interface |
NXOpen.CAE.Connections.PointLocation | Location interface |
NXOpen.CAE.Connections.PointSeriesLocation | Location interface |
NXOpen.CAE.Connections.SelectionRecipeLocation | Location interface |
NXOpen.CAE.CrossSectionParameters | This class is worked as a packet of information that can be used to change cross-section state |
NXOpen.CAE.CyclicSymmetricParameters | Implementation of axi-symmetry utility |
NXOpen.CAE.DeformationParameters | This class is worked as a packet of information that can be be used to deform NXOpen.CAE.Post objects |
NXOpen.CAE.DependentMeshListItemBuilderList | Represents a list of objects |
NXOpen.CAE.DestinationCollectorBuilder | Represents a Element Collector Container (Ecc) selection |
NXOpen.CAE.DurabilityDataControlBuilder | Represents a builder class for the transient event data control |
NXOpen.CAE.DurSpecialistParameterObject | TODO: Add documentation |
NXOpen.CAE.DurSpecialistSimulationObject | Represents a NXOpen.CAE.DurSpecialistSimulationObject |
NXOpen.CAE.ElementTypeBuilder | Represents the specification of the FEA Element Type for a meshing dialog |
NXOpen.CAE.FEElemEdge | Represents a Finite Element Edge which can be shared by more that one element |
NXOpen.CAE.FEElement | Represents a Finite Element |
NXOpen.CAE.FEElemFace | Represents a Finite Element Face |
NXOpen.CAE.FENode | Represents a Finite Element Node |
NXOpen.CAE.IMeshManager | Manages meshesNXOpen.CAE.IMeshManager in cae parts |
NXOpen.CAE.MeshManager | Creates MeshesNXOpen.CAE.Mesh in a fem part |
NXOpen.CAE.MeshManagerOccurrence | Manages MeshOccurrencs and MeshCollectorOccurrences in a fem part |
NXOpen.CAE.LayoutState | This is the class representing a layout state |
NXOpen.CAE.LayoutStateDataReference | This class represents a data reference of a layout state |
NXOpen.CAE.ManualSweepBetweenListItemSelectionList | Represents a list of objects |
NXOpen.CAE.MeshManualSweepBetweenListItemSelectionList | Represents a list of objects |
NXOpen.CAE.NumberFormat | Represents the settings of format number value |
NXOpen.CAE.NxBcPlotContours | Represents a NXOpen.CAE.NxBcPlotContours object returned from NXOpen.CAE.SimBcPlotContoursBuilder.CreatePlotObject in NXOpen.CAE.SimBcPlotContoursBuilder |
NXOpen.CAE.Optimization.NameDescription | |
NXOpen.CAE.Optimization.TBSCastCondition | Represents the manufacturing restrictions of NXOpen.CAE.Optimization.TBSTopologyRestrictArea |
NXOpen.CAE.Optimization.TBSEigenvalueOptimizationParameters | Represents the parameters to control an eigenvalue optimization |
NXOpen.CAE.Optimization.TBSGroupDefinition | Represents a group of nodes or elements |
NXOpen.CAE.Optimization.TBSLoadCase | Represents the load case |
NXOpen.CAE.Optimization.TBSLoadCaseManager | Managers load cases |
NXOpen.CAE.Optimization.TBSObjectives | Represents the objective functions of an optimization |
NXOpen.CAE.Optimization.TBSOptimizationParameters | Represents the parameters to control an optimization |
NXOpen.CAE.Optimization.TBSShapeOptimizationParameters | Represents the control parameters of shape optimization |
NXOpen.CAE.Optimization.TBSTopologyControllerOptimizationParameters | Represents the parameters to control an optimization in controller strategy |
NXOpen.CAE.Optimization.TBSTopologySensitivityOptimizationParameters | Represents the parameters to control an optimization in sensitivity strategy |
NXOpen.CAE.Optimization.TBSOutputControlOptions | Represents the output result control options of the optimization |
NXOpen.CAE.Optimization.TBSShapeLinkCondition | Represents the definition of link condition for shape restriction |
NXOpen.CAE.Optimization.TBSSingleObjective | Represents a single objective |
NXOpen.CAE.Optimization.TBSStopCondition | Represents the condtion to end an optimization |
NXOpen.CAE.Optimization.TBSTopologyLinkCondition | Represents the definition of symmetry and link conditions for topology optimization |
NXOpen.CAE.OrderedSelection | Represents list of ordered selection entitites |
NXOpen.CAE.PostMesh | This class has the information related to post mesh group |
NXOpen.CAE.PostScenarioConfigurationVariable | A configuration variable to which values can be bound in order to define a user selection (NXOpen.CAE.PostScenarioSelectionParameters ) for a post scenario (NXOpen.CAE.PostScenarioBuilder ) |
NXOpen.CAE.PostScenarioDataDefinition | Represents a data source data definition |
NXOpen.CAE.PostScenarioDescriptor | This class represents a NXOpen.CAE.PostScenarioDescriptor |
NXOpen.CAE.PostScenarioInputDefinition | Represents an Input Definition, part of a NXOpen.CAE.PostScenarioDescriptor |
NXOpen.CAE.PostScenarioMeshDefinition | A mesh definition, in the context of a NXOpen.CAE.PostScenarioDescriptor , requires a mesh for the scenario |
NXOpen.CAE.PostScenarioSelectionParameters | The class handles the User Selection for a Scenario |
NXOpen.CAE.PostScenarioVariable | A selection variable to which values can be bound in order to define a user selection for a post scenario |
NXOpen.CAE.PostScenarioVisualizationDefinition | A visualization, in the context of a NXOpen.CAE.PostScenarioDescriptor , dictates how data will be visualized on-screen |
NXOpen.CAE.QueryCurveUsageOptions | Represents the options to apply a query curve |
NXOpen.CAE.ResponseSimulation.CombinationEvaluationOptions | Represents the setting for combination evaluation |
NXOpen.CAE.ResponseSimulation.DataLocation | Represents the data location to perform evaluation |
NXOpen.CAE.ResponseSimulation.DDAMComponentData | Represents an excitation on one specified direction |
NXOpen.CAE.ResponseSimulation.DynamicEvaluationOutputSettings | Represents the output setting for dynamic response evaluation |
NXOpen.CAE.ResponseSimulation.EvaluationParameters | Represents the evaluation parameters for a response simulation meta solution |
NXOpen.CAE.ResponseSimulation.ExcitationLocationDefinition | Represents the manager to CAE.ResponseSimulation.DistributedLoadExcitation |
NXOpen.CAE.ResponseSimulation.FrequencyDefinition | Represents the frequency setting to perform FRF evaluation |
NXOpen.CAE.ResponseSimulation.FunctionComponentData | Represents a function component setting of NXOpen.CAE.ResponseSimulation.NodalFunctionExcitation on one direction |
NXOpen.CAE.ResponseSimulation.FunctionEvaluationOutputSettings | Represents the output setting for function response evaluation |
NXOpen.CAE.ResponseSimulation.ObjectLabel | Represents the setting to label an object |
NXOpen.CAE.ResponseSimulation.PhysicalDampingSettings | Represents the physical damping settings for a response simulation meta solution |
NXOpen.CAE.ResponseSimulation.RSEventAttributes | Represents all possible attributes setting for response analysis event |
NXOpen.CAE.ResponseSimulation.RSEventOutputSetting | Reprensents the output setting for an event |
NXOpen.CAE.ResponseSimulation.RSEventSolverParameters | Represents a response analysis event |
NXOpen.CAE.ResponseSimulation.SolutionAttributes | Represents attributes setting of response analysis meta solution |
NXOpen.CAE.ResponseSimulation.VelocityImpactDirection | Represents a NXOpen.CAE.ResponseSimulation.VelocityImpactDirection |
NXOpen.CAE.ResponseSimulation.VelocityImpactParameters | Represents a NXOpen.CAE.ResponseSimulation.VelocityImpactParameters |
NXOpen.CAE.ResultAccess | Represents a specific result state for a given NXOpen.CAE.Result |
NXOpen.CAE.ResultMeasure | Represents a ResultMeasure class NXOpen.CAE.ResultMeasure |
NXOpen.CAE.ResultParameters | This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two NXOpen.CAE.ResultAccess objects |
NXOpen.CAE.ResultParametersWithNodalForceReport | |
NXOpen.CAE.ResultParametersWithProbe | |
NXOpen.CAE.SelectCAEBody | Represents a single object selection |
NXOpen.CAE.SelectCAEBodyList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectCAEEdge | Represents a single object selection |
NXOpen.CAE.SelectCAEEdgeList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectCAEFace | Represents a single object selection |
NXOpen.CAE.SelectCAEFaceList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectFEElemFaceList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectFENode | Represents a single object selection |
NXOpen.CAE.SelectFENodeList | Represents a list of objects on a selection list |
NXOpen.CAE.SelectMeshList | Represents a list of objects on a selection list |
NXOpen.CAE.SignalProcessingDBSettings | This is the class handling the dB settings option: a dB reference value and a dB format (10 or 20) |
NXOpen.CAE.SimBCDisplay | Represents a BC display attributes |
NXOpen.CAE.SimBcGroup | Represents a BC group in a solution or solution step |
NXOpen.CAE.SimConstraintGroup | Represents a constraint group in a solution or solution step |
NXOpen.CAE.SimLoadGroup | Represents a load group in a solution or solution step |
NXOpen.CAE.SimSimulationObjectGroup | Represents a simulation object group in a solution or solution step |
NXOpen.CAE.SimCondition | This class represents a Condition which defines a state where all or some values of NXOpen.CAE.SimConditionParam are known |
NXOpen.CAE.SimConditionParam | This class represents a named measurable quantity |
NXOpen.CAE.SimConditionSeqMgr | This is the manager for Condition Sequences |
NXOpen.CAE.SimConditionSequence | This class represents a time history of NXOpen.CAE.SimCondition |
NXOpen.CAE.SimConditionTimeStep | This class represents a step in the time history of a NXOpen.CAE.SimConditionSequence |
NXOpen.CAE.SimLoadRecipe | This is the class handling the attributes of a load recipe |
NXOpen.CAE.SimLoadRecipeFunctionAttributes | This is the class handling the default attributes of a source used by a load recipe |
NXOpen.CAE.SimLoadRecipeMapEntry | These objects represent one line in a NXOpen.CAE.SimLoadRecipe 's mapping |
NXOpen.CAE.SimLoadRecipeMapping | This is the class handling the mapping of a certain load type of a load recipe |
NXOpen.CAE.SimLoadRecipeSource | This is the class handling the attributes of a source used by a load recipe |
NXOpen.CAE.SimMotionLoadsListItemBuilder | Represents a NXOpen.CAE.SimMotionLoadsListItemBuilder |
NXOpen.CAE.SimResultReference | Represents a Result Reference in the |
NXOpen.CAE.ThicknessPlotContours | Represents a NXOpen.CAE.ThicknessPlotContours object returned from NXOpen.CAE.ThicknessPlotContoursBuilder.CreatePlotObject in NXOpen.CAE.ThicknessPlotContoursBuilder |
NXOpen.CAE.ViewportSynchronizationOptions | This class represents a NXOpen.CAE.ViewportSynchronizationOptions |
NXOpen.CAE.Xyplot.BaseDisplayStyleSetting | Represent an abstract object on display style |
NXOpen.CAE.Xyplot.LeaderStyle | Manages the Leader display styles |
NXOpen.CAE.Xyplot.Preference | Manages the preference data |
NXOpen.CAE.Xyplot.WallDisplayStyles | Manages the wall display styles |
NXOpen.CAE.Xyplot.WallDisplayStyles2D | Manages the 2D wall display styles |
NXOpen.CAE.Xyplot.WallDisplayStyles2DBarChart | Manages the 2D bar chart wall display styles |
NXOpen.CAE.Xyplot.WallDisplayStyles3D | Manages the 3D wall display styles |
NXOpen.CAM.AcrossVoids | Represents a NXOpen.CAM.AcrossVoids |
NXOpen.CAM.ArcOutputTypeCiBuilder | Represents a ArcOutputTypeCiBuilder |
NXOpen.CAM.AreaMillingContainment | Represents a Containment Builder |
NXOpen.CAM.AreaMillingNonSteepContainment | Represents a NonSteep Containment Builder |
NXOpen.CAM.AreaMillingSteepContainment | Represents a Steep Containment Builder |
NXOpen.CAM.BaseBuilder | Represents a NXOpen.CAM.BaseBuilder |
NXOpen.CAM.Blade | Represents a Blade Rough Drive Method Builder |
NXOpen.CAM.BladeFinish | Represents a Blade Finish Drive Method Builder |
NXOpen.CAM.BladeRough | Represents a Blade Rough Drive Method Builder |
NXOpen.CAM.BlendFinish | Represents a Blend Finish Drive Method Builder |
NXOpen.CAM.EdgeFinish | Represents a Blade Finish Drive Method Builder |
NXOpen.CAM.HubFinish | Represents a Hub Finish Drive Method Builder |
NXOpen.CAM.BladeCutStart | Represents a Blade Rough Drive Method Builder |
NXOpen.CAM.BladeEdge | Represents a BladeEdge Builder |
NXOpen.CAM.BladeFinishGeom | Represents BladeFinishGeom Builder |
NXOpen.CAM.BladeStartPoint | Represents BladeStartPoint Builder |
NXOpen.CAM.BlankIpw | Represents the blank ipw builder for blank definition |
NXOpen.CAM.Boundary | Represents a CAM boundary object |
NXOpen.CAM.BoundaryMemberSet | Represents a boundary member set |
NXOpen.CAM.BoundaryMemberSetPlanarMill | Represents a boundary member set |
NXOpen.CAM.BoundaryMillingMemberSet | Represents a boundary member set |
NXOpen.CAM.BoundaryTurnMemberSet | Represents a boundary turning member set |
NXOpen.CAM.BoundaryMemberSetList | Represents a list of objects |
NXOpen.CAM.BoundarySet | Represents a boundary set |
NXOpen.CAM.BoundaryMillingSet | Represents a boundary milling set |
NXOpen.CAM.BoundarySetPlanarMill | Represents a boundary set for the planar mill/surface contour operation |
NXOpen.CAM.BoundaryTurnSet | Represents a boundary turning set |
NXOpen.CAM.BoundarySetList | Represents a list of objects |
NXOpen.CAM.BoundaryTurnVariableStock | Represents a BoundaryTurnVariableStock |
NXOpen.CAM.BoundaryTurnVariableStockSet | Represents a turning boundary variable stock set |
NXOpen.CAM.BoundaryTurnVariableStockSetList | Represents a list of objects |
NXOpen.CAM.CAMFeatureList | Represents a list of objects |
NXOpen.CAM.CenterlineDrillVariableIncrementBuilder | Represents a Turn Avoidance Path Points Builder |
NXOpen.CAM.ChipControl | Represents a NXOpen.CAM.ChipControl |
NXOpen.CAM.CleanupOutput | Represents a NXOpen.CAM.CleanupOutput |
NXOpen.CAM.CleanupSettings | Represents a NXOpen.CAM.CleanupSettings |
NXOpen.CAM.CollisionPairBuilderList | Represents a list of objects |
NXOpen.CAM.ContourAngle | Represents a NXOpen.CAM.ContourAngle |
NXOpen.CAM.CornerControlBuilder | Represents a FinishPasses Builder |
NXOpen.CAM.CustomLoops | Represents a CustomLoops object |
NXOpen.CAM.CustomLoopSet | Represents a loop set object |
NXOpen.CAM.CustomLoopSetList | Represents a list of objects |
NXOpen.CAM.CutAngle | Represents a boundary cut angle ci Builder |
NXOpen.CAM.CutBand | Cut Band Builder |
NXOpen.CAM.Cutcom | Represents a NXOpen.CAM.Cutcom |
NXOpen.CAM.CutDirection | Represents a boundary cut direction ci Builder |
NXOpen.CAM.CutDwell | Represents a NXOpen.CAM.CutDwell |
NXOpen.CAM.CutLevel | Represents a cut level object for cavity mill and zlevel mill |
NXOpen.CAM.CutLevelPlanar | Represents a cut level object for planar mill |
NXOpen.CAM.CutParameters | Represents a NXOpen.CAM.CutParameters |
NXOpen.CAM.HoleMachiningCutParameters | Represents a HoleMachiningCutParameters Builder |
NXOpen.CAM.FeatureMillingCutParameters | Represents a FeatureMillingCutParameters Builder |
NXOpen.CAM.CylindricalMillingCutParameters | Represents a CylindricalMillingCutParameters Builder |
NXOpen.CAM.CylinderMillingCutParameters | Represents a CylinderMillingCutParameters Builder |
NXOpen.CAM.ThreadMillingCutParameters | Represents a ThreadMillingCutParameters Builder |
NXOpen.CAM.HoleDrillingCutParameters | Represents a HoleDrillingCutParameters Builder |
NXOpen.CAM.MillCutParameters | Represents a NXOpen.CAM.MillCutParameters |
NXOpen.CAM.ThreadCutParameters | Represents a NXOpen.CAM.ThreadCutParameters |
NXOpen.CAM.TurnCutParameters | Represents a NXOpen.CAM.TurnCutParameters |
NXOpen.CAM.WedmCutParameters | Represents a NXOpen.CAM.WedmCutParameters |
NXOpen.CAM.CutPatternBuilder | Represents a Cut Pattern Builder |
NXOpen.CAM.CutSideBuilder | Represents a cut side builder |
NXOpen.CAM.CutSides | Represents a Cut Sides Builder |
NXOpen.CAM.CutStrategy | Represents cut strategy |
NXOpen.CAM.CutterExport | Represents Cutter Export Builder |
NXOpen.CAM.CutVolume | The classs represent the sub builder for creating cut volume feature items |
NXOpen.CAM.CutVolumeGeom | The classs represent the builder for creating cut volume features |
NXOpen.CAM.CutVolumeList | Represents a list of objects |
NXOpen.CAM.Cycle | Represets a User Defined Event |
NXOpen.CAM.CycleCoolant | Represets a User Defined Event |
NXOpen.CAM.CycleDwell | Represets a User Defined Event |
NXOpen.CAM.CycleNodragClearance | Represets a User Defined Event |
NXOpen.CAM.CycleSpindle | Represets a User Defined Event |
NXOpen.CAM.CycleStepRetract | Represets a User Defined Event |
NXOpen.CAM.CycleTipRelease | Represets a User Defined Event |
NXOpen.CAM.DimensionRule | Represents a DimensionRule Builder |
NXOpen.CAM.DisplayPaint | Represents a display paint Builder |
NXOpen.CAM.DisplayPath | Represents a display path Builder |
NXOpen.CAM.DisplaySilhouette | Represents a display silhouette Builder |
NXOpen.CAM.DisplayTool | Represents a display tool Builder |
NXOpen.CAM.DmAmBuilder | Represents a Area Milling Drive Method Builder |
NXOpen.CAM.DmBndBuilder | Represents a Boundary Drive Method Builder |
NXOpen.CAM.DmCmBuilder | Represents a DmCmBuilder |
NXOpen.CAM.DmCmMultiplePassesCiBuilder | Represents a DmCmMultiplePassesCiBuilder |
NXOpen.CAM.DmCurveBuilder | Represents a Curve Drive Method Builder |
NXOpen.CAM.DmRadBuilder | Represents a DmRadBuilder Builder |
NXOpen.CAM.DmRotaryFloorFinishBuilder | represent rotary floor finish builder |
NXOpen.CAM.DmSpiralBuilder | Represents a Spiral Drive Method Builder |
NXOpen.CAM.DmStreamlineCutStep | Represents a streamline cut step builder |
NXOpen.CAM.DmSurfBuilder | Represents a DmSurfBuilder |
NXOpen.CAM.DmToolPosition | Represents a streamline tool position builder |
NXOpen.CAM.DmTpBuilder | Represents a tool path Drive Method Builder |
NXOpen.CAM.DmTrimExtend | Represents a streamline trim and extend builder |
NXOpen.CAM.DmUserExitCiBuilder | Represents a exit name ci Builder |
NXOpen.CAM.DPMTubeBuilder | Represents a Tube Drive Builder |
NXOpen.CAM.DrillSurfaceBuilder | Represents a Drill Surface Builder |
NXOpen.CAM.DriveChainItemBuilderList | Represents a list of objects |
NXOpen.CAM.DriveMode | Drive Mode Builder |
NXOpen.CAM.EditSubopCommand | Represents an Edit Subop Command Builder |
NXOpen.CAM.ElementDoubleBuilder | Represents a builder for an Element double value in of a CAM |
NXOpen.CAM.ElementIntBuilder | Represents a builder for an Element int value in of a CAM |
NXOpen.CAM.ElementStringBuilder | Represents a builder for an Element int value in of a CAM |
NXOpen.CAM.ExtendAtEdges | Represents a NXOpen.CAM.ExtendAtEdges |
NXOpen.CAM.FacesSequence | Represents faces sequence |
NXOpen.CAM.FeedsBuilder | Represents a feeds Builder |
NXOpen.CAM.FeedsOptimizationData | Represents a NXOpen.CAM.FeedsOptimizationData |
NXOpen.CAM.FeedsTurnBuilder | Represents a turning feeds Builder |
NXOpen.CAM.FeedsWedmBuilder | Represents a wedm feeds Builder |
NXOpen.CAM.FinishDwell | Represents a NXOpen.CAM.FinishDwell |
NXOpen.CAM.FinishPassesBuilder | Represents a FinishPasses Builder |
NXOpen.CAM.FirstPlunge | Represents the first plunge |
NXOpen.CAM.FlowBuilder | Represents a FlowBuilder Builder |
NXOpen.CAM.FlowCutSteepContainment | Represents a Steep Containment Builder |
NXOpen.CAM.FormEdgesBuilder | Represents a FormEdges Builder |
NXOpen.CAM.Geometry | Represents a CAM geometry object |
NXOpen.CAM.GeometryCiBuilder | Represents a geometry ci Builder |
NXOpen.CAM.GeometrySet | Represents a geometry set for a CAM object |
NXOpen.CAM.FBM.FeatureSet | Interface for feature set |
NXOpen.CAM.GeometrySetList | Represents a list of objects |
NXOpen.CAM.GuidedCurveBuilder | Represents a Guided Curve Drive Method Builder |
NXOpen.CAM.GuidedCurveCutOrder | Represents a guided curve cut order builder |
NXOpen.CAM.GuidingCurvesCutDir | Represents a guiding curves cut dir type |
NXOpen.CAM.HolderSectionBuilder | Represents a Holder Section Builder |
NXOpen.CAM.HoldingSystemBuilderList | Represents a list of objects |
NXOpen.CAM.HoleBossGeom | Represents a CAM geometry builder |
NXOpen.CAM.HoleBossSet | Represents a Cut Area Geometry builder |
NXOpen.CAM.ThreadedBossSet | Represents a thread boss Geometry builder |
NXOpen.CAM.ThreadedHoleSet | Represents a Cut Area Geometry builder |
NXOpen.CAM.HoleBossSetList | Represents a list of objects |
NXOpen.CAM.InferredDouble | Represents a builder for an inferred value in of a CAM |
NXOpen.CAM.InheritableBuilder | Represents a builder for an inheritable value in of a CAM |
NXOpen.CAM.Inheritable2dLength | Represents a builder for an inheritable double value in of a CAM |
NXOpen.CAM.InheritableBoolBuilder | Represents a builder for an inheritable integer value in of a CAM |
NXOpen.CAM.InheritableDoubleBuilder | Represents a builder for an inheritable double value in of a CAM |
NXOpen.CAM.InheritableToolDepBuilder | Represents a builder for an inheritable tool dependent value in of a CAM |
NXOpen.CAM.InheritableFeedBuilder | Represents a builder for an inheritable feed value in of a CAM |
NXOpen.CAM.InheritableFeedModeBuilder | Represents a builder for an inheritable enum value in of a CAM |
NXOpen.CAM.InheritableIntBuilder | Represents a builder for an inheritable integer value in of a CAM |
NXOpen.CAM.InheritableTextBuilder | Represents a builder for an inheritable text value in of a CAM |
NXOpen.CAM.InspectionAxisExtrapolationModeBuilder | Represents a builder for an inheritable axis extrapolation mode enum value |
NXOpen.CAM.InspectionCylinderCircleFitModeBuilder | Represents a builder for an inheritable cylinder/circle fitting mode enum value |
NXOpen.CAM.InspectionDatumPlaneFittingModeBuilder | Represents a builder for an inheritable datum plane fitting mode enum value |
NXOpen.CAM.InspectionLimitsOfSizeModeBuilder | Represents a builder for an inheritable limits of size mode enum value |
NXOpen.CAM.InspectionProbeTipTypeBuilder | Represents a builder for an inheritable probe tip type value |
NXOpen.CAM.InspectionProfileDispositionModeBuilder | Represents a builder for an inheritable profile disposition mode enum value |
NXOpen.CAM.InspectionReferenceFeatureModeBuilder | Represents a builder for an inheritable reference feature mode enum value |
NXOpen.CAM.InspectionSensorStrategyBuilder | Represents a builder for an inheritable sensor strategy enum value |
NXOpen.CAM.InspectionSurfaceProfileModeBuilder | Represents a builder for an inheritable datum plane fitting mode enum value |
NXOpen.CAM.InitialProfilePlunge | Represents the initial profile plunge |
NXOpen.CAM.InPathEventDataBuilderList | Represents a list of objects |
NXOpen.CAM.InPathEventSetData | Represents in path event |
NXOpen.CAM.InspectionPathPointBuilder | Represents an inspection path point builder |
NXOpen.CAM.LaserControlPoint | Represents a Laser Control Point builder |
NXOpen.CAM.LaserControlPointList | Represents a list of objects |
NXOpen.CAM.LaserCutDirection | Represents cut direction settings for laser move |
NXOpen.CAM.LaserCutoutDefinition | Represents cutout definition settings for laser move |
NXOpen.CAM.LaserHeadOrientation | Represents head orientation settings for laser sub move |
NXOpen.CAM.LaserPiercingPoint | Represents piercing point settings for laser move |
NXOpen.CAM.LayoutCiBuilder | Represents a layout ci Builder |
NXOpen.CAM.LeadAngles | Represents a lead angles |
NXOpen.CAM.LevelToLevel | Represents a NXOpen.CAM.LevelToLevel |
NXOpen.CAM.LowerLimit | Represents a NXOpen.CAM.LowerLimit |
NXOpen.CAM.MachiningFeature | Represents a NXOpen.CAM.CAMFeature builder |
NXOpen.CAM.MachiningFeatureGeom | * This class represent the builder for machining feature geometry |
NXOpen.CAM.MachiningRegionBuilder | Represents a Machining Region Builder |
NXOpen.CAM.ManualFeatureBuilderList | Represents a list of objects |
NXOpen.CAM.MaxCutTraverse | Represents a NXOpen.CAM.MaxCutTraverse |
NXOpen.CAM.MergeSubopCommand | Represents an Merge Subop Command Builder |
NXOpen.CAM.MillingTrackpointBuilder | Represents a Milling Trackpoint Builder |
NXOpen.CAM.MinCutDepth | Represents a NXOpen.CAM.MinCutDepth |
NXOpen.CAM.MinCutLength | Represents a NXOpen.CAM.MinCutLength |
NXOpen.CAM.MinCutVolume | Represents a NXOpen.CAM.MinCutVolume |
NXOpen.CAM.MultiBladeBaseGeometry | Represents a selectoin geometry Builder |
NXOpen.CAM.MultiBladeSplittersGeometry | Represents a selectoin list geometry Builder |
NXOpen.CAM.MultiDepthCut | Represents a NXOpen.CAM.MultiDepthCut |
NXOpen.CAM.MultiplePassesBuilder | Represents a MultiplePassesBuilder |
NXOpen.CAM.MultiRamp | Represents a NXOpen.CAM.MultiRamp |
NXOpen.CAM.NcmAvoidancePointBuilder | Represents a NXOpen.CAM.NcmAvoidancePointBuilder |
NXOpen.CAM.NcmClearanceBuilder | Represents a NXOpen.CAM.NcmClearanceBuilder |
NXOpen.CAM.NcmEngRetBuilder | Represents a builder for an inheritable double value in of a CAM |
NXOpen.CAM.NcmHoleMachiningEngRet | Represents a builder for an inheritable double value in of a CAM |
NXOpen.CAM.NcmLaserEngage | Represents Engage settings for laser non cutting moves |
NXOpen.CAM.NcmLaserRetract | Represents Retract settings for laser non cutting moves |
NXOpen.CAM.NcmPlanarEngRetBuilder | Represents a builder for an inheritable double value in of a CAM |
NXOpen.CAM.NcmScEngRetBuilder | Represents a builder for an inheritable double value in of a CAM |
NXOpen.CAM.NcmSmoothingBuilder | Represents a NXOpen.CAM.NcmSmoothingBuilder |
NXOpen.CAM.NcmTransfer | Represents a NXOpen.CAM.NcmTransfer |
NXOpen.CAM.NcmTransferBuilder | Represents a NXOpen.CAM.NcmTransferBuilder |
NXOpen.CAM.NcmTransferTypes | Represents a CAM.NcmTransferTypes |
NXOpen.CAM.Notes | Represents notes |
NXOpen.CAM.ObjectContainer | Represents a Cam Objects Builder |
NXOpen.CAM.CutRegionsBuilder | Represents a Cut Regions Builder |
NXOpen.CAM.OffsetDataBuilder | Represents the Offset Point Data Builder |
NXOpen.CAM.OperationDisplayOptionsBuilder | Represents a display options Builder |
NXOpen.CAM.OppositeDirection | Represents OppositeDirection |
NXOpen.CAM.OutputUncutRegions | Represents a NXOpen.CAM.OutputUncutRegions |
NXOpen.CAM.PartAxisBuilder | Represents a part axis builder |
NXOpen.CAM.Path | Represets a Cam Tool Path |
NXOpen.CAM.PathDisplayColors | Represents a path display colors Builder |
NXOpen.CAM.PatternTypeBuilder | Represents a Guided Curve pattern type builder |
NXOpen.CAM.PitchSetting | Represents a NXOpen.CAM.PitchSetting |
NXOpen.CAM.PmopToolAxisCiBuilder | Represents a PmopToolAxisCiBuilder |
NXOpen.CAM.PostEventsCiBuilder | Represents a PostEventsCiBuilder |
NXOpen.CAM.ProbeControlParametersBuilder | Represents a NXOpen.CAM.ProbeControlParametersBuilder |
NXOpen.CAM.ProbeOutputControl | Represents a NXOpen.CAM.ProbeOutputControl |
NXOpen.CAM.ProbeParamsBuilder | Represents the Probe Params Builder |
NXOpen.CAM.ProbeProtectedParametersBuilder | Represents the Probe Protected Parameters Builder |
NXOpen.CAM.ProbeStockParametersBuilder | Represents the Probe Stock Parameters Builder |
NXOpen.CAM.ProbeToleranceParametersBuilder | Represents a NXOpen.CAM.ProbeToleranceParametersBuilder |
NXOpen.CAM.ProfileStrategy | Represents profile strategy |
NXOpen.CAM.ProjVecCiBuilder | Represents a tool axis ci Builder |
NXOpen.CAM.RampingMode | Represents a ramping mode Builder |
NXOpen.CAM.ReliefCut | Represents the relief cut |
NXOpen.CAM.ReliefPlunge | Represents a NXOpen.CAM.ReliefPlunge |
NXOpen.CAM.RoundPointBuilder | Represents the round Point Builder |
NXOpen.CAM.SelectCAMFeature | Represents a single object selection |
NXOpen.CAM.SelectCAMFeatureList | Represents a list of objects on a selection list |
NXOpen.CAM.Sequence | Represents Sequence Builder |
NXOpen.CAM.SmallAreaAvoidance | Represents a SmallArea Builder |
NXOpen.CAM.Splitter | Represents a Splitter Builder |
NXOpen.CAM.SplitterList | Represents a list of objects |
NXOpen.CAM.SpringPasses | Represents a spring passes |
NXOpen.CAM.SpunOutlineGeom | Represents a spun outline geometry object for turning boundary |
NXOpen.CAM.SteepContainment | Represents a NXOpen.CAM.SteepContainment |
NXOpen.CAM.StepoverBuilder | Represents a Stepover Builder |
NXOpen.CAM.WedmStepoverBuilder | Represents a NXOpen.CAM.WedmStepoverBuilder |
NXOpen.CAM.StepParamsBuilder | Represents a StepParams Builder |
NXOpen.CAM.StepUpBuilder | Represents a StepUp Builder |
NXOpen.CAM.StopPosition | Represents a stop position |
NXOpen.CAM.StringList | Represents a string list |
NXOpen.CAM.SurfaceDriveGeometry | Represents a CAM drive geometry object for surface area |
NXOpen.CAM.SurfaceDriveGeometrySet | Represents a geometry set for a CAM object |
NXOpen.CAM.SurfaceDriveGeometrySetList | Represents a list of objects |
NXOpen.CAM.TabPointDataBuilderList | Represents a list of objects |
NXOpen.CAM.ThreadedBossSetList | Represents a list of objects |
NXOpen.CAM.ThreadedHoleSetList | Represents a list of objects |
NXOpen.CAM.ToolAxisAdvanced | Represents a Tool Axis Advanced Builder |
NXOpen.CAM.ToolAxisBase | Represents a tool axis ci Builder |
NXOpen.CAM.ToolAxisFixed | Represents a Tool Axis Fixed Builder |
NXOpen.CAM.ToolAxisVariable | Represents a Tool Axis Variable Builder |
NXOpen.CAM.ToolAxisChange | Represents a NXOpen.CAM.ToolAxisChange |
NXOpen.CAM.ToolAxisCiBuilder | Represents a tool axis ci Builder |
NXOpen.CAM.ToolAxisInterpolate | Represents a Tool Axis Interpolate Builder |
NXOpen.CAM.InterpolateAngle | Represents builder of Interpolate Angle, one option of Tool Axis |
NXOpen.CAM.InterpolateVector | Represents builder of Interpolate Vector, one option of Tool Axis |
NXOpen.CAM.ToolAxisTilt | Represents a builder for an inheritable double value in of a CAM |
NXOpen.CAM.ToolChangeCiBuilder | Represents a ToolChangeCiBuilder |
NXOpen.CAM.ToolPathSplitItemBuilderList | Represents a list of objects |
NXOpen.CAM.ToolPositioningBuilder | Represents the Tool Positioning Builder |
NXOpen.CAM.TrackingBuilder | Represents a Tracking Builder |
NXOpen.CAM.TrimPlane | Represents Trim Plane |
NXOpen.CAM.TrimPoint | Represents trim point |
NXOpen.CAM.TrochoidalSettings | Represents a NXOpen.CAM.TrochoidalSettings |
NXOpen.CAM.TurnAvoidanceApproachBuilder | Represents an avoidance start of engage Builder |
NXOpen.CAM.TurnAvoidanceClearanceBuilder | Represents an avoidance start of engage Builder |
NXOpen.CAM.TurnAvoidanceDepartureBuilder | Represents an avoidance start of engage Builder |
NXOpen.CAM.TurnAvoidanceFromBuilder | Represents an avoidance from Builder |
NXOpen.CAM.TurnAvoidanceGohomeBuilder | Represents an avoidance return Builder |
NXOpen.CAM.TurnAvoidancePathPointsBuilder | Represents a turn avoidance path points builder |
NXOpen.CAM.TurnAvoidanceReturnBuilder | Represents an avoidance return Builder |
NXOpen.CAM.TurnAvoidanceStartBuilder | Represents an avoidance start Builder |
NXOpen.CAM.TurnAvoidanceStartOfEngageBuilder | Represents an avoidance start of engage Builder |
NXOpen.CAM.TurnConcaveCornerControl | Represents a concave corner ja |
NXOpen.CAM.TurnCornerControl | Represents a first plunge ja |
NXOpen.CAM.TurnCutterClearance | Represents a NXOpen.CAM.TurnCutterClearance |
NXOpen.CAM.TurnDirection | Represents a direction |
NXOpen.CAM.TurnEngageRetractBuilder | Represents a first plunge Builder |
NXOpen.CAM.TurnGrooveCornerControl | Represents a groove corner control ja |
NXOpen.CAM.TurnOrientWcs | Represents an Turn Orient Wcs Builder |
NXOpen.CAM.TurnOverlap | Represents a NXOpen.CAM.TurnOverlap |
NXOpen.CAM.TurnRoughFinishLocalReturnBuilder | Represents an avoidance start Builder |
NXOpen.CAM.TurnRoughFinishTestCut | Represents a test cut builder |
NXOpen.CAM.TurnRoughVariableIncrementBuilder | Represents a Variable Increment Builder |
NXOpen.CAM.TurnStock | Represents a NXOpen.CAM.TurnStock |
NXOpen.CAM.TurnThreadEngageRetractBuilder | Represents a Thread Turning Engage or Retract Builder |
NXOpen.CAM.TurnThreadFinishPassesBuilder | Represents a TurnThreadFinishPasses Builder |
NXOpen.CAM.Ude | Represets a User Defined Event |
NXOpen.CAM.UdeList | Represents a list of objects |
NXOpen.CAM.UdeParameter | Represents a User Defined Event Parameter |
NXOpen.CAM.UdeSet | Represets a set of User Defined Events |
NXOpen.CAM.UdtSectionBuilder | Represents a UdtSection Builder |
NXOpen.CAM.UpDownCutting | Represents a NXOpen.CAM.UpDownCutting |
NXOpen.CAM.VerticalPosition | Represents a VerticalPosition Builder |
NXOpen.CAM.WedmArcOutputTypeCiBuilder | Represents a WedmArcOutputTypeCiBuilder |
NXOpen.CAM.WedmCustomBoundaryDataBuilderList | Represents a list of objects |
NXOpen.CAM.WedmStatusControlCiBuilder | Represents a WedmStatusControlCiBuilder |
NXOpen.CAM.WireGuide | Represents a wire guide object |
NXOpen.CAM.WireGuideList | Represents a list of objects |
NXOpen.CAM.ZAxisSmoothing | Represents a NXOpen.CAM.ZAxisSmoothing |
NXOpen.CDF | Represents a NXOpen.CDF , which is a representation of an NX color palette |
NXOpen.ColorDefinition | Represents a NXOpen.ColorDefinition , which is a representation of one color on an NX color palette |
NXOpen.ColorWidth | Represents a NXOpen.ColorWidth used by NXOpen.WidthDefinition to define a custom width for each color |
NXOpen.CustomWidth | Represents a NXOpen.CustomWidth used by NXOpen.WidthDefinition to define the three custom widths associated with each WidthDefinition |
NXOpen.DateBuilder | The DateBuilder class allows a date and/or time to be input or output via the DateItem builder |
NXOpen.DateItemBuilder | This class stores a date and time |
NXOpen.DateItemBuilderList | Represents a list of objects |
NXOpen.Diagramming.BaseSubObjectBuilder | Represents a BaseSubObjectBuilder |
NXOpen.Diagramming.BaseTaggedObjectBuilder | Represents a BaseTaggedObjectBuilder |
NXOpen.Diagramming.ConnectionLocationBuilderList | Represents a list of objects |
NXOpen.Diagramming.LeaderLineBuilderList | Represents a list of objects |
NXOpen.Diagramming.PortBuilderList | Represents a list of objects |
NXOpen.Diagramming.SheetBorderSettingsBuilder | The SheetBorderSettings builder |
NXOpen.Diagramming.SheetMarginSettingsBuilder | The SheetMarginSettings builder |
NXOpen.Diagramming.SheetZoneSettingsBuilder | The SheetZoneSettings builder |
NXOpen.Diagramming.TextStyleBuilder | Represents a TextStyleBuilder |
NXOpen.Diagramming.TitleBlockCellBuilder | Represents a builder to edit NXOpen.Diagramming.TitleBlock 's cell |
NXOpen.DiagrammingLibraryAuthor.LineTypeBuilder | Represents a LineTypeBuilder |
NXOpen.DiagrammingLibraryAuthor.LineTypeBuilderList | Represents a list of objects |
NXOpen.DiagrammingLibraryAuthor.PipeStockBuilder | Represents a PipeStockBuilder |
NXOpen.DiagrammingLibraryAuthor.PortDataBuilder | Represents a PortDataBuilder |
NXOpen.DiagrammingLibraryAuthor.Symbol2DBuilder | Represents a Symbol2DBuilder |
NXOpen.DiagrammingLibraryAuthor.Symbol3DBuilder | Represents a Symbol3DBuilder |
NXOpen.Die.DieAssistantFlangeProfileList | Represents a list of objects |
NXOpen.Die.DieAssistantTrimProfileList | Represents a list of objects |
NXOpen.Die.DieAttributesBuilder | Represents a NXOpen.Die.DieAttributesBuilder |
NXOpen.Die.DieBooleanBuilder | Represents a NXOpen.Die.DieBooleanBuilder |
NXOpen.Die.DieBooleanBuilderList | Represents a list of objects |
NXOpen.Die.DieDirectionBuilder | Represents a NXOpen.Die.DieDirectionBuilder |
NXOpen.Die.DieLimitsBuilder | Limits a path to a segment of the path |
NXOpen.Die.DieLimitsBuilderList | Represents a list of objects |
NXOpen.Die.DieLocationBuilder | Represents a NXOpen.Die.DieLocationBuilder |
NXOpen.Die.DieLocationBuilderList | Represents a list of objects |
NXOpen.Die.DieLocationsBuilder | Represents a NXOpen.Die.DieLocationsBuilder |
NXOpen.Die.DiePlaneBuilder | Represents a NXOpen.Die.DiePlaneBuilder |
NXOpen.Die.DrawBeadSegmentBuilder | Segment builder for Die Engineering draw bead |
NXOpen.Die.DrawBeadSegmentBuilderList | Represents a list of objects |
NXOpen.Die.DrawBeadTaperBuilder | Taper definition for the end of the Die Engineering Draw Bead |
NXOpen.Die.PierceItemBuilderList | Represents a list of objects |
NXOpen.Die.PressModelRoot | Represents a Die Simulation - Press Model Root |
NXOpen.Display.CgfxAttr | Represents a Cgfx Attribute |
NXOpen.Display.CgfxMattex | Represents a Cgfx Material |
NXOpen.Display.IrayPlusMaterialAttribute | Represents an IrayPlus Attribute |
NXOpen.Display.IrayPlusMaterialAttributeEnum | Represents a IrayPlus Enum Attribute |
NXOpen.Display.LayerSettingsBuilder | Represents a builder for object layer settings |
NXOpen.Display.PointCloudClippingBoxesListItemBuilder | Represents a NXOpen.Display.PointCloudClippingBoxesListItemBuilder to create clipping regions for NXOpen.Display.PointCloud |
NXOpen.Display.PointCloudClippingBoxesListItemBuilderList | Represents a list of objects |
NXOpen.Display.SectionCurveSettingsBuilder | Represents a NXOpen.Display.SectionCurveSettingsBuilder |
NXOpen.Drafting.AttributeItemBuilder | Represents a NXOpen.Drafting.AttributeItemBuilder |
NXOpen.Drafting.AttributeItemBuilderList | Represents a list of objects |
NXOpen.Drafting.AutomationRuleBuilder | Represents a NXOpen.Drafting.AutomationRuleBuilder |
NXOpen.Drafting.CutCopyPasteLeaderBuilder | Represents a Drafting Paste, especially when reassociating a leader on paste |
NXOpen.Drafting.PrimaryContentItemBuilder | Represents a NXOpen.Drafting.PrimaryContentItemBuilder |
NXOpen.Drafting.PrimaryContentItemBuilderList | Represents a list of objects |
NXOpen.Drawings.AnnotationSettingsBuilder | Represents a Drawings.AnnotationSettingsBuilder |
NXOpen.Drawings.AssociativeAngleBuilder | This builder allows the user to create an associative or non-associative angle by measuring between a combination of two objects or vectors evaluated on a specified plane, or by an expression |
NXOpen.Drawings.AutomationBookletBuilder | Represents a NXOpen.Drawings.AutomationBookletBuilder |
NXOpen.Drawings.AutomationTemplateRegionBuilder | Represents a NXOpen.Drawings.AutomationTemplateRegionBuilder |
NXOpen.Drawings.BorderAndZoneStyleBuilder | Represents the Border and Zone Style Builder which manages all the style attributes related * to sheet borders, sheet margins and sheet zones |
NXOpen.Drawings.ConversionProcessSettingsBuilder | Represents a Drawings.ConversionProcessSettingsBuilder |
NXOpen.Drawings.DraftingComponentSelectionBuilder | This builder allows the user to select a view in which component objects can be designated as primary or secondary geometry |
NXOpen.Drawings.DrawingFormatSheetBuilder | Represents a NXOpen.Drawings.DrawingFormatSheetBuilder |
NXOpen.Drawings.DrawingRegionRulesBuilder | Represents a Drawing region rules builder |
NXOpen.Drawings.GeneralWorkFlowBuilder | Represents a NXOpen.Drawings.GeneralWorkFlowBuilder |
NXOpen.Drawings.HalfSectionLineBuilder | Represents a NXOpen.Drawings.HalfSectionLineBuilder |
NXOpen.Drawings.HiddenObjectsBuilder | This builder allows the user to select a view in which component objects can be designated as hidden or shown |
NXOpen.Drawings.HingeLineBuilder | Represents a Drawings |
NXOpen.Drawings.MultipleViewPlacementBuilder | This builder allows the user to create a Multiple View Placement |
NXOpen.Drawings.OrientedSectionLineBuilder | Represents a NXOpen.Drawings.OrientedSectionLineBuilder |
NXOpen.Drawings.OvtBuilder | Represents a NXOpen.Drawings.OvtBuilder |
NXOpen.Drawings.ParentViewBuilder | Represents a NXOpen.Drawings.ParentViewBuilder |
NXOpen.Drawings.PointAndAngleSectionLineBuilder | Represents a NXOpen.Drawings.PointAndAngleSectionLineBuilder |
NXOpen.Drawings.PointToPointSectionLineBuilder | Represents a NXOpen.Drawings.PointToPointSectionLineBuilder |
NXOpen.Drawings.ProjectedViewOrientationBuilder | Represents a NXOpen.Drawings.ProjectedViewOrientationBuilder |
NXOpen.Drawings.RevolvedSectionLineBuilder | Represents a NXOpen.Drawings.RevolvedSectionLineBuilder |
NXOpen.Drawings.SectionLineSegmentBuilder | Represents a NXOpen.Drawings.SectionLineSegmentBuilder |
NXOpen.Drawings.SectionLineSegmentBuilderList | Represents a list of objects |
NXOpen.Drawings.SectionLineSegmentPointBuilder | Represents Section Line Segment Point Builder |
NXOpen.Drawings.SectionLineSegmentPointListBuilder | Represents SectionLineSegmentPointListBuilder class |
NXOpen.Drawings.SectionLineSegmentsBuilder | Represents a class Drawings |
NXOpen.Drawings.SectionLineSettingsBuilder | Represents the Section Line Settings Builder (Drawings |
NXOpen.Drawings.SelectDraftingView | Represents a single object selection |
NXOpen.Drawings.SelectDraftingViewList | Represents a list of objects on a selection list |
NXOpen.Drawings.SelectDrawingRegion | Represents a single object selection |
NXOpen.Drawings.SelectDrawingView | Represents a single object selection |
NXOpen.Drawings.SelectDrawingViewList | Represents a list of objects on a selection list |
NXOpen.Drawings.SelectModelViewBuilder | Represents a Select Model View builder that selects a model view |
NXOpen.Drawings.SelectSectionLine | Represents a single object selection |
NXOpen.Drawings.SettingsBuilder | Represents a Drawings.SettingsBuilder |
NXOpen.Drawings.SheetBorderSettingsBuilder | Represents a NXOpen.Drawings.SheetBorderSettingsBuilder |
NXOpen.Drawings.SheetMarginSettingsBuilder | Represents the Drawing Sheet Margins Style Builder |
NXOpen.Drawings.SheetZoneSettingsBuilder | Represents the Drawing Sheet Zone Setting Style Builder |
NXOpen.Drawings.ShipDraftingViewLinesBuilder | Represents a ship view lines block |
NXOpen.Drawings.ShipDraftingViewLinesBuilderList | Represents a list of objects |
NXOpen.Drawings.SpecifySectionLineBuilder | Select a section line |
NXOpen.Drawings.SteppedSectionLineBuilder | Represents a NXOpen.Drawings.SteppedSectionLineBuilder |
NXOpen.Drawings.SvtBuilder | Represents a NXOpen.Drawings.SvtBuilder |
NXOpen.Drawings.TrackDrawingChangesGeneralBuilder | Represents a NXOpen.Drawings.TrackDrawingChangesGeneralBuilder |
NXOpen.Drawings.TrackDrawingChangesReportFilterBuilder | Represents a Drawings.TrackDrawingChangesReportFilterBuilder |
NXOpen.Drawings.View2dOrientBuilder | Represents the View 2D Orientation (Drawings |
NXOpen.Drawings.ViewBoundaryBuilder | Represents the View Boundary (Drawings |
NXOpen.Drawings.ViewBreakBuilder | Represents a NXOpen.Drawings.ViewBreakBuilder |
NXOpen.Drawings.ViewCenterCoordinateBuilder | Represents the View center coodinate (Drawings |
NXOpen.Drawings.ViewCommonViewLabelBuilder | Represents a NXOpen.Drawings.ViewCommonViewLabelBuilder |
NXOpen.Drawings.ViewDetailLabelBuilder | Represents a NXOpen.Drawings.ViewDetailLabelBuilder |
NXOpen.Drawings.ViewLabelBuilder | Represents a NXOpen.Drawings.ViewLabelBuilder |
NXOpen.Drawings.ViewOrientationBuilder | Represents a ViewOrientationBuilder |
NXOpen.Drawings.ViewPlacementBuilder | Represents a NXOpen.Drawings.ViewPlacementBuilder |
NXOpen.Drawings.ViewProjectedArrowSettingsBuilder | Represents a NXOpen.Drawings.ViewProjectedArrowSettingsBuilder |
NXOpen.Drawings.ViewProjectedViewSettingsBuilder | Represents a NXOpen.Drawings.ViewProjectedViewSettingsBuilder |
NXOpen.Drawings.ViewProjectionPlaneBuilder | Represents the View Projection Plane (Drawings |
NXOpen.Drawings.ViewScaleBuilder | Represents the View Scale (Drawings |
NXOpen.Drawings.ViewSectionLabelBuilder | Represents a NXOpen.Drawings.ViewSectionLabelBuilder |
NXOpen.Drawings.ViewSectionLineBuilder | Represents a NXOpen.Drawings.ViewSectionLineBuilder |
NXOpen.Drawings.ViewSettingsBuilder | Represents a Drawings.ViewSettingsBuilder |
NXOpen.Drawings.ViewStyleBaseBuilder | Represents the BASE tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleBuilder | Represents the View Style Builder (Drawings |
NXOpen.Drawings.ViewStyleDetailBuilder | Represents the DETAIL tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleFPCalloutConfigBuilder | Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleFPCalloutsBuilder | Represents the Callout section of the Flat Pattern tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleFPCurvesBuilder | Represents the Curve section of the Flat Pattern tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleGeneralBuilder | Represents view style general builder (Drawings |
NXOpen.Drawings.ViewStyleHiddenLinesBuilder | Represents the HIDDEN LINES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleInheritPmiBuilder | Represents the INHERIT PMI tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleOrientationBuilder | Represents the ORIENTATION tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStylePerspectiveBuilder | Represents the PERSPECTIVE tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleProjectedBuilder | Represents the PROJECTED tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleSecondaryComponentsBuilder | Represents the Secondary Geometry tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleSectionBuilder | Represents the SECTION tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleSectionConstraintsBuilder | Represents the SECTION CONSTRAINTS tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleShadingBuilder | Represents the SHADING tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleShipbuildingLinesBuilder | Represents the Shipbuilding LINES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleShipbuildingLinesBuilderList | Represents a list of objects |
NXOpen.Drawings.ViewStyleSmoothEdgesBuilder | Represents the SMOOTH EDGES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleThreadsBuilder | Represents the THREADS tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleTraceLinesBuilder | Represents the TRACE LINES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleVirtualIntersectionsBuilder | Represents the VIRTUAL INTERSECTIONS tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewStyleVisibleLinesBuilder | Represents the VISIBLE LINES tab on the View Style Dialog (Drawings |
NXOpen.Drawings.ViewWorkflowBuilder | Represents a NXOpen.Drawings.ViewWorkflowBuilder |
NXOpen.Drawings.VisibleAndHiddenLinesColorFontWidthBuilder | Represent a NXOpen.Drawings.VisibleAndHiddenLinesColorFontWidthBuilder |
NXOpen.Drawings.VisualDrawingComparePrefsBuilder | This class gets and sets components of Visual Overlay in Drafting Preferences |
NXOpen.EndCutBlockBuilder | Represents a End Cut Block Builder |
NXOpen.ExpressionCollectorSetList | Represents a list of objects |
NXOpen.ExpressionSectionSetList | Represents a list of objects |
NXOpen.Facet.SelectFacetedBody | Represents a single object selection |
NXOpen.Facet.SelectFacetedBodyList | Represents a list of objects on a selection list |
NXOpen.Features.CurveFinderBuilder | Represents a collection of curves and their relationships to other curves in the model |
NXOpen.Features.CustomFeatureEvent | Represents the event data for custom feature |
NXOpen.Features.CustomFeatureCreateFeatureGeometryEvent | Represents the event data for a create geometry callback for a custom feature |
NXOpen.Features.CustomFeatureHighlightEvent | Represents the event data for highlight callback for custom feature |
NXOpen.Features.CustomFeatureInformationEvent | Represents the event data for information callback for custom feature |
NXOpen.Features.CustomFeatureInternalFeaturePreUpdateEvent | Represents the event data for pre-update callback for construction and output feature of custom feature |
NXOpen.Features.CustomFeatureModifyFeatureGeometryEvent | Represents the event data for a modify geometry callback for a custom feature |
NXOpen.Features.CustomFeaturePostUpdateEvent | Represents the event data for post-update callback for custom feature |
NXOpen.Features.CustomFeaturePreUpdateEvent | Represents the event data for pre-update callback for custom feature |
NXOpen.Features.EditWithRollbackManager | Represents an object that stores transient data during Edit with Rollback of a feature |
NXOpen.Features.EmbossJoggle | Represents a joggle object |
NXOpen.Features.EmbossLimit | Represents emboss start and end objects, meaning, targets and end-cap definitions |
NXOpen.Features.EmbossProjection | Represents a projection object |
NXOpen.Features.EmbossRegion | Represents an emboss region object |
NXOpen.Features.EmbossSidewall | Represents an emboss sidewall object |
NXOpen.Features.EmbossTaper | Represents a taper object |
NXOpen.Features.EmbossTarget | Represents a target object |
NXOpen.Features.FaceRecognitionBuilder | Represents a collection of faces and their relationships to other faces in the model |
NXOpen.Features.FeatureList | Represents a list of objects |
NXOpen.Features.FeatureReferencesBuilder | Represents a NXOpen.Features.FeatureReferencesBuilder |
NXOpen.Features.GeometricConstraintData | Represents Geometric Constraint Data class |
NXOpen.Features.GeometricConstraintDataManager | Represents Geometric Constraint Data Manager class |
NXOpen.Features.GeometricConstraintDataSetManager | Represents Geometric Constraint Data Set Manager class |
NXOpen.Features.GlobalShapingCurveOffsetBuilderList | Represents a list of objects |
NXOpen.Features.GlobalShapingPointOffsetBuilder | The class used to define the points and offsets needed for the target point list |
NXOpen.Features.GlobalShapingPointOffsetBuilderList | Represents a list of objects |
NXOpen.Features.MatchedReferenceBuilder | Represents a NXOpen.Features.MatchedReferenceBuilder |
NXOpen.Features.PartGeometryCopyBuilder | Represents a NXOpen.Features.PartGeometryCopyBuilder builder |
NXOpen.Features.PartGeometryCopySelectBuilder | Represents a NXOpen.Features.PartGeometryCopySelectBuilder builder |
NXOpen.Features.PartGeometryCopySelectBuilderList | Represents a list of objects |
NXOpen.Features.PointSetFacePercentageBuilderList | Represents a list of objects |
NXOpen.Features.RegionListItemBuilderList | Represents a list of objects |
NXOpen.Features.SelectBodyFeatureList | Represents a list of objects on a selection list |
NXOpen.Features.SelectDatumCsysList | Represents a list of objects on a selection list |
NXOpen.Features.SelectFeature | Represents a single object selection |
NXOpen.Features.SelectFeatureList | Represents a list of objects on a selection list |
NXOpen.Features.SelectFlatPattern | Represents a single object selection |
NXOpen.Features.SelectPartModule | Represents a single object selection |
NXOpen.Features.SheetMetal.BendListItemBuilderList | Represents a list of objects |
NXOpen.Features.SheetMetal.BendOptions | Represents a Sheetmetal Bend Options class |
NXOpen.Features.SheetMetal.ConvertInputListItemBuilder | Represents a Sheetmetal convert to sheet metal corner list item builder class |
NXOpen.Features.SheetMetal.ConvertInputListItemBuilderList | Represents a list of objects |
NXOpen.Features.SheetMetal.CornerTreatmentBuilder | The CornerTreatmentBuilder class is used to manage a builder object for a corner treatment in the flat solid and flat pattern dialogs |
NXOpen.Features.SheetMetal.FeatureBendPropertiesBuilderList | Represents a list of objects |
NXOpen.Features.SheetMetal.HoleTreatmentBuilder | The HoleTreatmentBuilder class is used to manage a builder object for a hole treatment in the flat pattern dialogs |
NXOpen.Features.SheetMetal.JoggleInputListItemBuilder | Represents a Sheetmetal joggle input list item builder class |
NXOpen.Features.SheetMetal.JoggleInputListItemBuilderList | Represents a list of objects |
NXOpen.Features.SheetMetal.JoggleSideOptionsBuilder | Represents a Sheetmetal Joggle side Options class |
NXOpen.Features.SheetMetal.MiterOptions | Represents a Miter Data Options builder |
NXOpen.Features.SheetMetal.SheetmetalComponentBuilder | Represents a sheet metal component builder to be used in the creation and modification of features componenets |
NXOpen.Features.SheetMetal.SMBoundaryConditionBuilder | Represents a Boundary condition object for Metaform |
NXOpen.Features.SheetMetal.SMBoundaryConditionBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.AnchorPointList | Represents a list of objects |
NXOpen.Features.ShipDesign.BuiltUpBlockBuilder | Represents a NXOpen.Features.ShipDesign.BuiltUpBlockBuilder |
NXOpen.Features.ShipDesign.BuiltUpOffsetBuilder | Represents a NXOpen.Features.ShipDesign.BuiltUpOffsetBuilder |
NXOpen.Features.ShipDesign.BulkHeadListItemBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.CornerCutListItemBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.DeckListBuilder | This builder allows you to define the general arrangement view information |
NXOpen.Features.ShipDesign.DeckListItemBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.DrawingPartBuilder | Represents a NXOpen.Features.ShipDesign.DrawingPartBuilder |
NXOpen.Features.ShipDesign.DrawingPartBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.DrawingSheetBuilder | Represents a NXOpen.Features.ShipDesign.DrawingSheetBuilder |
NXOpen.Features.ShipDesign.DrawingSheetBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.DrawingTemplateBuilder | Represents a drawing template selection block |
NXOpen.Features.ShipDesign.ItFrameListItemBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.OrientationAngleMethodsBuilder | This class defines the method of angle definition used in the definition of the region's orientation |
NXOpen.Features.ShipDesign.OrientationPointMethodsBuilder | This class is used to define the boundary of the regions when definining the orientation of a profile |
NXOpen.Features.ShipDesign.OrientationRegionItemBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.PlaneListBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.PlateBoundaryOptionBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.ReadDataSetBuilder | This class will read a data set file from Team Center |
NXOpen.Features.ShipDesign.RoomAttributeListBuilder | The builder to define room attributes |
NXOpen.Features.ShipDesign.SeamBlockBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.SectionViewBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.SelectPartBuilder | Represents a NXOpen.Features.ShipDesign.SelectPartBuilder |
NXOpen.Features.ShipDesign.SelectStructuresBuilder | This builder allows you to select structures in NXOpen.Features.ShipDesign.GeneralArrangementViewBuilder |
NXOpen.Features.ShipDesign.ShipNameFieldBuilder | A field, combined with other fields, to generate a name for a Ship Basic Design Object such as a Deck |
NXOpen.Features.ShipDesign.ShipNamesBuilder | This class provides the mechanism for defining the names of Basic Design objects such as Decks, Bulkheads, Stiffener Systems, etc |
NXOpen.Features.ShipDesign.ShipNamesBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.ShipNamesListBuilder | This class provides a list of NXOpen.Features.ShipDesign.ShipNamesBuilder objects |
NXOpen.Features.ShipDesign.ShipStructureBuilder | Represents a NXOpen.Features.ShipDesign.ShipStructureBuilder |
NXOpen.Features.ShipDesign.StandardPartItemBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.SteelInsulationBoundaryBuilder | Represents a Steel Insulation Boundary builder |
NXOpen.Features.ShipDesign.SteelInsulationBoundaryBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.StiffenerBySupportPathBuilder | This class defines the builder to collect stiffener by support path data for Stiffener feature |
NXOpen.Features.ShipDesign.StiffenerLimitBuilder | This class defines the path limit method used by a Stiffener or Edge Reinforcement feature |
NXOpen.Features.ShipDesign.StiffenerStockBuilder | This class defines the Profile or Plate stock for a Stiffener or Edge Reinforcement feature |
NXOpen.Features.ShipDesign.SubSystemBuilderList | Represents a list of objects |
NXOpen.Features.ShipDesign.TransFrameListItemBuilderList | Represents a list of objects |
NXOpen.Features.SmoothRangeBuilder | Represents a NXOpen.Features.SmoothRangeBuilder builder |
NXOpen.Features.SmoothRangeBuilderList | Represents a list of objects |
NXOpen.Features.Subdivision.CageSectionData | Represents subdivision cage section selection |
NXOpen.Features.Subdivision.CageSectionDataList | Represents a list of objects |
NXOpen.Features.Subdivision.SelectCageObjectData | Represents subdivision cage topology object selection |
NXOpen.Features.Subdivision.SelectSubdivisionBodyList | Represents a list of objects on a selection list |
NXOpen.Features.TabNoteCfgBuilder | Represents a NXOpen.Features.TabNoteCfgBuilder |
NXOpen.Features.UserDefinedFeatureApplicationData | JA interface for UserDefinedFeatureApplicationData object |
NXOpen.Features.UserDefinedFeatureApplicationField | JA interface for UserDefinedFeatureApplicationField object |
NXOpen.Features.UserDefinedFeatureCopyEvent | JA interface for the UserDefinedFeatureCopyEvent object |
NXOpen.Features.UserDefinedFeatureCreateEvent | JA interface for the UserDefinedFeatureCreateEvent object |
NXOpen.Features.UserDefinedFeatureEditEvent | JA interface for the UserDefinedFeatureEditEvent object |
NXOpen.Features.UserDefinedFeatureExpressionData | JA interface for UserDefinedFeatureExpressionData object |
NXOpen.Features.UserDefinedFeatureIconEvent | JA interface for the UserDefinedFeatureIconEvent object |
NXOpen.Features.UserDefinedFeatureReferenceData | JA interface for UserDefinedFeatureReference object |
NXOpen.Features.UserDefinedFeatureUpdateEvent | JA interface for the UserDefinedFeatureUpdateEvent object |
NXOpen.Features.VariableRadiusPointsBuilder | Represents a NXOpen.Features.VariableRadiusPointsBuilder builder |
NXOpen.Features.VariableRadiusPointsBuilderList | Represents a list of objects |
NXOpen.Features.VehicleDesign.CloseRangeBlindVolumeListItemBuilder | Represents the builder to create blind volume list item used for close range visibility |
NXOpen.Features.VehicleDesign.CloseRangeCameraListItemBuilder | Represents the builder to create camera list item used for close range visibility |
NXOpen.Features.VehicleDesign.CloseRangeCameraListItemBuilderList | Represents a list of objects |
NXOpen.Features.VehicleDesign.CloseRangeDemoCylinderListItemBuilder | Represents the builder to create demo cylinder list item used for close range visibility |
NXOpen.Features.VehicleDesign.CloseRangeDemoCylinderListItemBuilderList | Represents a list of objects |
NXOpen.Features.VehicleDesign.HeadImpactAPillarDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactAPillarDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactAPillarWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactAPillarWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactBPillarDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactBPillarDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactBPillarWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactBPillarWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactFrontHeaderWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOPillarDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOPillarDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOPillarWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOPillarWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOtherRailDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOtherRailDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactOtherRailWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactOtherRailWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRearHeaderDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRearHeaderDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRearHeaderWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRearHeaderWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRPillarDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRPillarDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactRPillarWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactRPillarWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactSideRailDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactSideRailWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactSideRailWizardBuilder |
NXOpen.Features.VehicleDesign.HeadImpactUpperRoofDetailBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactUpperRoofDetailBuilder |
NXOpen.Features.VehicleDesign.HeadImpactUpperRoofWizardBuilder | Represents a NXOpen.Features.VehicleDesign.HeadImpactUpperRoofWizardBuilder |
NXOpen.Fields.FieldDrawHelper | Represents Field_DrawHelper |
NXOpen.Fields.FieldEvaluator | Represents a Field Evaluator which can be used to evaluate a NXOpen.Fields.Field |
NXOpen.Fields.IApplication | Interface for all applications registered with the Field subsystem |
NXOpen.CAE.FemSignalProcessingApplication | Implementation of the NXOpen.Fields.IApplication |
NXOpen.Fields.PathObjectsList | Represents a list of objects |
NXOpen.GeometricAnalysis.DupinBuilder | The Dupin Indicatrix is a tool to geometrically display the surface curvature at a specified point on a surface |
NXOpen.GeometricAnalysis.FaceAnalysisDataRangeBuilder | Represents data range functions used by Face Analysis |
NXOpen.GeometricAnalysis.FaceAnalysisDisplayBuilder | Represents a set of display settings used by Face Analysis |
NXOpen.GeometricAnalysis.FaceAnalysisNormalsBuilder | Represents reverse normal functions used by Face Analysis |
NXOpen.GeometricAnalysis.SectionAnalysis.CircularGridBuilder | Represents the circular grid section specifications for a NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.CurveAlignedBuilder | Represents the Curve Aligned specification for a NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.GridSpacingBuilder | Represents the grid spacing for certain types of section specifications for the NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.InteractiveBuilder | Represents the Interactive specification for a NXOpen.GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.IsoparametricBuilder | Represents the Isoparametric specification for a GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.ParallelPlanesExBuilder | Represents the Parallel Plane specification for a GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.QuadrilateralGridBuilder | Represents the quadrilateral grid section specifications for a GeometricAnalysis.SectionAnalysis.SectionAnalysisBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.RadialBuilder | Represents the Radial specification for a GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.SectionPlaneBuilder | Represents a plane which is used to cut sections on faces or facet bodies |
NXOpen.GeometricAnalysis.SectionAnalysis.TriangularGridBuilder | Represents the triangular grid section specifications for a SectionAnalysisBuilder |
NXOpen.GeometricAnalysis.SectionAnalysis.XYZPlaneBuilder | Represents the XYZ Plane specification for a GeometricAnalysis.SectionAnalysis.SectionAnalysisExBuilder |
NXOpen.GeometricUtilities.AlignmentMethodBuilder | Represents a NXOpen.GeometricUtilities.AlignmentMethodBuilder |
NXOpen.GeometricUtilities.AlongPathPattern | the AlongPath pattern definition |
NXOpen.GeometricUtilities.AlongSpineBuilder | Represents a NXOpen.GeometricUtilities.AlongSpineBuilder |
NXOpen.GeometricUtilities.AnchorLocatorBuilder | Represents a NXOpen.GeometricUtilities.AnchorLocatorBuilder |
NXOpen.GeometricUtilities.BetweenLocationsData | Represents a NXOpen.GeometricUtilities.BetweenLocationsData |
NXOpen.GeometricUtilities.BlendLimitsData | Represents a NXOpen.GeometricUtilities.BlendLimitsData |
NXOpen.GeometricUtilities.BlendSetbackBuilder | This class provides ability to define a setback curve on a blend face |
NXOpen.GeometricUtilities.BlendSetbackBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.BlendStopshortBuilder | Represents a NXOpen.GeometricUtilities.BlendStopshortBuilder |
NXOpen.GeometricUtilities.BooleanOperation | Represents a boolean operation |
NXOpen.GeometricUtilities.BooleanRegionSelect | a class which defines boolean region select |
NXOpen.GeometricUtilities.BooleanToolBuilder | a class which defines boolean tool builder |
NXOpen.GeometricUtilities.BoundaryDefinitionBuilder | Represents a NXOpen.GeometricUtilities.BoundaryDefinitionBuilder |
NXOpen.GeometricUtilities.BoundaryDefinitionBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.BoundingObjectBuilder | Represents a NXOpen.GeometricUtilities.BoundingObjectBuilder |
NXOpen.GeometricUtilities.BoundingObjectBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.BridgeCurveConnectivity | Data offering connectivity controls for NXOpen.Features.BridgeCurveBuilderEx |
NXOpen.GeometricUtilities.CircularCrossSection | Represents a circular section data for face blend |
NXOpen.GeometricUtilities.CircularPattern | the circular pattern definition |
NXOpen.GeometricUtilities.ColorCodedRegionBuilder | Represents a NXOpen.GeometricUtilities.ColorCodedRegionBuilder |
NXOpen.GeometricUtilities.CombOptionsBuilder | Represents a NXOpen.GeometricUtilities.CombOptionsBuilder |
NXOpen.GeometricUtilities.ConicCrossSection | Represents a conic section data for face blend |
NXOpen.GeometricUtilities.Continuity | Represents a NXOpen.GeometricUtilities.Continuity Allows user to specify continuity constraint surface construction |
NXOpen.GeometricUtilities.ControlPoleManagerData | This class manages the control poles for a set of surfaces or curves |
NXOpen.GeometricUtilities.CurveExtendData | Represents a NXOpen.GeometricUtilities.CurveExtendData |
NXOpen.GeometricUtilities.CurveExtensionBuilder | Spline extension builder class |
NXOpen.GeometricUtilities.CurveFitData | Represents the curve fitting methods options |
NXOpen.GeometricUtilities.CurveFitJoin | Represents the curve fit join data |
NXOpen.GeometricUtilities.CurveFitOptions | Represents the curve fit data |
NXOpen.GeometricUtilities.CurveLengthBuilder | Represents a NXOpen.GeometricUtilities.CurveLengthBuilder builder |
NXOpen.GeometricUtilities.CurveLengthData | Represents an CurveLength data |
NXOpen.GeometricUtilities.CurveLimitsData | Represents a NXOpen.GeometricUtilities.CurveLimitsData |
NXOpen.GeometricUtilities.CurveOptions | Represents the curve options data |
NXOpen.GeometricUtilities.CurveRangeBuilder | Represents the curve range and anchor builder |
NXOpen.GeometricUtilities.CurveSettings | Represents the curve settings data |
NXOpen.GeometricUtilities.CurveShapingBuilder | Represents a NXOpen.GeometricUtilities.CurveShapingBuilder |
NXOpen.GeometricUtilities.DegreesAndSegmentsOrPatchesBuilder | the DegreesAndSegmentsOrPatches builder |
NXOpen.GeometricUtilities.DepthSkewBuilder | This class provides ability to specify a depth and a skew value |
NXOpen.GeometricUtilities.DisplayResolutionBuilder | Represents a NXOpen.GeometricUtilities.DisplayResolutionBuilder |
NXOpen.GeometricUtilities.DraftPointData | Represents a draft point data object |
NXOpen.GeometricUtilities.DraftVariableAngleData | Represents data containing variable angle draft point data objects |
NXOpen.GeometricUtilities.EndHoleData | Represents a NXOpen.GeometricUtilities.EndHoleData |
NXOpen.GeometricUtilities.EntityUsageInfo | Represents a NXOpen.GeometricUtilities.EntityUsageInfo |
NXOpen.GeometricUtilities.EntityUsageInfoList | Represents a list of objects |
NXOpen.GeometricUtilities.Extend | Represents an extend data |
NXOpen.GeometricUtilities.ExtrudeRevolveToolBuilder | a class which is a sub-component of BooleanTool |
NXOpen.GeometricUtilities.FaceChangeOverflowBehavior | Represents a NXOpen.GeometricUtilities.FaceChangeOverflowBehavior It provides several face change options for controlling behavior when a change face overflows an incident face |
NXOpen.GeometricUtilities.FacePlaneSelectionBuilder | Represents a NXOpen.GeometricUtilities.FacePlaneSelectionBuilder |
NXOpen.GeometricUtilities.FacePlaneToolBuilder | a sub-component of BooleanToolBuilder |
NXOpen.GeometricUtilities.FaceSetOffsetList | Represents a list of objects |
NXOpen.GeometricUtilities.FeatureOffset | Represents a Offset |
NXOpen.GeometricUtilities.FeatureOptions | Represents various options supported on features |
NXOpen.GeometricUtilities.FlowDirection | Represents a NXOpen.GeometricUtilities.FlowDirection Allows user to specify different flow direction to control output surface shape |
NXOpen.GeometricUtilities.FrameOnPathBuilder | Frame on path builder |
NXOpen.GeometricUtilities.FtmFixedCurvesBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.FtmTransformCurvesBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.FtmTransformPointsBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.GeneralPattern | the General pattern definition |
NXOpen.GeometricUtilities.GeometryLocationData | Represents a NXOpen.GeometricUtilities.GeometryLocationData |
NXOpen.GeometricUtilities.HelixPattern | the Helix pattern definition |
NXOpen.GeometricUtilities.HorizontalReference | the horizontal reference vector definition |
NXOpen.GeometricUtilities.InstanceEditedExpressionItem | edited value of one master expression of the input object(s) being patterned |
NXOpen.GeometricUtilities.InstanceEditedExpressionItemList | Represents a list of objects |
NXOpen.GeometricUtilities.InstanceEditedExpressionsList | list of NXOpen.GeometricUtilities.InstanceEditedExpressionItem objects |
NXOpen.GeometricUtilities.InteractiveSectionBuilder | Represents a NXOpen.GeometricUtilities.InteractiveSectionBuilder |
NXOpen.GeometricUtilities.LawBuilder | Represents a LawBuilder |
NXOpen.GeometricUtilities.Limits | Represents a limits data |
NXOpen.GeometricUtilities.MiddleHoleData | Represents a NXOpen.GeometricUtilities.MiddleHoleData |
NXOpen.GeometricUtilities.MirrorPattern | the Mirror pattern definition |
NXOpen.GeometricUtilities.ModlAlongCurveAngle | This class NXOpen.GeometricUtilities.ModlAlongCurveAngle represents motion type in ModlMotion |
NXOpen.GeometricUtilities.ModlDistanceAngle | Represents a NXOpen.GeometricUtilities.ModlDistanceAngle |
NXOpen.GeometricUtilities.ModlMotion | Represents a NXOpen.GeometricUtilities.ModlMotion |
NXOpen.GeometricUtilities.MovePoleBuilder | This class manages the control poles movements for a surface or curve |
NXOpen.GeometricUtilities.MultiTransitionLawBuilder | Represents multiple transition law |
NXOpen.GeometricUtilities.NonInflectingLawBuilder | Represents a non-inflecting law |
NXOpen.GeometricUtilities.OnPathDimensionBuilder | Builds an on-path dimension |
NXOpen.GeometricUtilities.OnPathDimWithValueBuilder | Represents a NXOpen.GeometricUtilities.OnPathDimWithValueBuilder |
NXOpen.GeometricUtilities.OrientationMethodBuilder | Represents a NXOpen.GeometricUtilities.OrientationMethodBuilder |
NXOpen.GeometricUtilities.OrientXpressBuilder | Represent the OrientXpress block |
NXOpen.GeometricUtilities.ParentEquivalencyMap | Represents a NXOpen.GeometricUtilities.ParentEquivalencyMap |
NXOpen.GeometricUtilities.ParentEquivalencyMapList | Represents a list of objects |
NXOpen.GeometricUtilities.PartModuleReferencesBuilder | Represents a NXOpen.GeometricUtilities.PartModuleReferencesBuilder |
NXOpen.GeometricUtilities.PatternClocking | enables the ability to apply delta transforms on individual instances of a pattern |
NXOpen.GeometricUtilities.PatternDefinition | pattern spacing for several pattern based commands |
NXOpen.GeometricUtilities.PatternFill | the pattern fill definition |
NXOpen.GeometricUtilities.PatternIncrementItem | variational for one master expression of the input object(s) being patterned |
NXOpen.GeometricUtilities.PatternIncrementItemList | Represents a list of objects |
NXOpen.GeometricUtilities.PatternIncrementsBuilder | pattern increments builder |
NXOpen.GeometricUtilities.PatternIncrementsList | list of NXOpen.GeometricUtilities.PatternIncrementItem objects |
NXOpen.GeometricUtilities.PatternOrientation | the pattern orientation definition |
NXOpen.GeometricUtilities.PatternReferencePointServiceBuilder | Pattern Reference Point is a service which enables the employing client to compute the reference point for pattern instance locations |
NXOpen.GeometricUtilities.PatternSpacing | defines the various ways pattern instances can be spaced within the pattern, particularly in the context of the PatternDefinition class |
NXOpen.GeometricUtilities.PatternSpacingsList | list of NXOpen.GeometricUtilities.PatternSpacingsListItem objects |
NXOpen.GeometricUtilities.PatternSpacingsListItem | one pattern spacing in the spacings list |
NXOpen.GeometricUtilities.PatternSpacingsListItemList | Represents a list of objects |
NXOpen.GeometricUtilities.PlayButtonsBuilder | VCR buttons for any dialog that needs them |
NXOpen.GeometricUtilities.PolygonPattern | the polygon pattern definition |
NXOpen.GeometricUtilities.ProjectionOptions | Represents a ProjectionOptions |
NXOpen.GeometricUtilities.Rebuild | Represents a NXOpen.GeometricUtilities.Rebuild |
NXOpen.GeometricUtilities.RectangularFrameBuilder | Rectangular frame builder |
NXOpen.GeometricUtilities.RectangularPattern | the rectangular pattern definition |
NXOpen.GeometricUtilities.ReduceSurfaceRadiusFaceGroupBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.ReferencePattern | the reference pattern definition |
NXOpen.GeometricUtilities.RefitControlBuilder | This class is used to specify the parameter set to refit faces |
NXOpen.GeometricUtilities.RegionTracker | a class which collects all the geometric entities used to identify a region of faces during a boolean feature |
NXOpen.GeometricUtilities.ReplAsstBuilder | Represents a NXOpen.GeometricUtilities.ReplAsstBuilder |
NXOpen.GeometricUtilities.RotationSetBuilder | Represents a NXOpen.GeometricUtilities.RotationSetBuilder |
NXOpen.GeometricUtilities.RotationSetBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.SaveConstraintsBuilder | Represents a builder for a Save Constraints |
NXOpen.GeometricUtilities.ScalingMethodBuilder | Represents a NXOpen.GeometricUtilities.ScalingMethodBuilder |
NXOpen.GeometricUtilities.ScalingSetBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.SectionPlaneData | Represents a Section Plane Data class This class acts like a container to hold the data needed to create a plane |
NXOpen.GeometricUtilities.SelectDividingObjectBuilder | Represents the dividing tool block for dividing face |
NXOpen.GeometricUtilities.SelectionListList | Represents a list of objects |
NXOpen.GeometricUtilities.ShapeFrameBuilder | Represents a NXOpen.GeometricUtilities.ShapeFrameBuilder |
NXOpen.GeometricUtilities.SimpleDraft | Represents an Offset |
NXOpen.GeometricUtilities.SmartVolumeProfileBuilder | This class contains the options for automatically closing the profile to surrounding model geometry |
NXOpen.GeometricUtilities.SpineDefinitionBuilder | Provides a spine definition for modeling operations |
NXOpen.GeometricUtilities.SpinePlaneBuilder | Represents a NXOpen.GeometricUtilities.SpinePlaneBuilder |
NXOpen.GeometricUtilities.SpinePlaneBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.SpinePointData | Represents a spine point def object |
NXOpen.GeometricUtilities.SpiralPattern | the Spiral pattern definition |
NXOpen.GeometricUtilities.SplineExtensionBuilder | Spline extension builder class |
NXOpen.GeometricUtilities.SShapedLawBuilder | Represents a s-shaped law |
NXOpen.GeometricUtilities.StartHoleData | Represents a NXOpen.GeometricUtilities.StartHoleData |
NXOpen.GeometricUtilities.StepOptionBehavior | Represents a NXOpen.GeometricUtilities.StepOptionBehavior It provides several step options for controlling behavior when move face and so on |
NXOpen.GeometricUtilities.StyledSweepDoubleOnPathDimBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.StyledSweepReferenceMethodBuilder | Represents a NXOpen.GeometricUtilities.StyledSweepReferenceMethodBuilder |
NXOpen.GeometricUtilities.SupportPlaneData | Represents a NXOpen.GeometricUtilities.SupportPlaneData |
NXOpen.GeometricUtilities.SurfaceRangeBuilder | Represents the surface range and anchor builder |
NXOpen.GeometricUtilities.TangentMagnitudeBuilder | This class provides ability to specify the start and end tangent magnitude values |
NXOpen.GeometricUtilities.TransformerData | Transformation and orientation tool |
NXOpen.GeometricUtilities.TransitionCurveBuilder | This class provides ability to create a transition(bridge) curve between two adjacent setback curves |
NXOpen.GeometricUtilities.TransitionCurveBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.TransitionLawNodeBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.TrimCurveBoundingObjectBuilder | Represents a NXOpen.GeometricUtilities.TrimCurveBoundingObjectBuilder |
NXOpen.GeometricUtilities.TrimCurveBoundingObjectBuilderList | Represents a list of objects |
NXOpen.GeometricUtilities.TwoExpressionsCollectorSetList | Represents a list of objects |
NXOpen.GeometricUtilities.TwoExpressionsSectionSetList | Represents a list of objects |
NXOpen.HumanPosturePrediction | Represent posture prediction object |
NXOpen.HumanReachZone | Represents a human reach zone |
NXOpen.KFObject | Represents an KF object in the part |
NXOpen.Layout2d.AssemblyCreationSettingsBuilder | Represents a NXOpen.Layout2d.AssemblyCreationSettingsBuilder |
NXOpen.Layout2d.ComponentNameBuilder | This class is used to construct the component name and part file name block, if it is in manage mode, we also have item number, item revision and item name |
NXOpen.Layout2d.ComponentSettingsBlockBuilder | Represents the Component Settings Button (Layout2d |
NXOpen.Layout2d.ComponentSettingsBuilder | Represents a NXOpen.Layout2d.ComponentSettingsBuilder This builder stores the information of the 2D Component settings |
NXOpen.Layout2d.CreateComponentFrom3DSettingsBuilder | Represents a NXOpen.Layout2d.CreateComponentFrom3DSettingsBuilder |
NXOpen.Layout2d.GeneralPreferencesBuilder | Represents a NXOpen.Layout2d.GeneralPreferencesBuilder This builder stores the general layout preferences |
NXOpen.Layout2d.SelectComponent | Represents a single object selection |
NXOpen.Layout2d.SelectComponentList | Represents a list of objects on a selection list |
NXOpen.LineColorFontWidthBuilder | Represent a NXOpen.LineColorFontWidthBuilder |
NXOpen.LineDesigner.FastPlacementUtilityBuilder | Fast Placement |
NXOpen.LineDesigner.JigOnPlaneBuilder | Jig on plane |
NXOpen.LineDesigner.PickRectanglePointsBuilder | Pick Rectangle Points |
NXOpen.LineDesigner.PlanViewManager | Represents a singleton JA for PlanViewManager |
NXOpen.LineDesigner.ReuseLibraryUtilityBuilder | Represents a JA for ReuseLibraryUtility |
NXOpen.LineFontBuilder | Represent a NXOpen.LineFontBuilder |
NXOpen.LineWidthBuilder | Represents a NXOpen.LineWidthBuilder |
NXOpen.LinkedMirrorPartAttributeEditData | JA interface for LinkedMirrorPartAttributeEditData object |
NXOpen.LinkedMirrorPartAttributeEditEvent | JA interface for LinkedMirrorPartAttributeEditEvent object |
NXOpen.LinkedMirrorPartEntityMapData | JA interface for LinkedMirrorPartEntityMapData oject |
NXOpen.LinkedMirrorPartEntityMapEvent | JA interface for LinkedMirrorPartEntityMapEvent object |
NXOpen.ListCreatorList | Represents a list of objects |
NXOpen.MechanicalRouting.BaseCornerTypeBuilder | Builder class for Base Corner Types |
NXOpen.MechanicalRouting.CornerBuilder | Builder class for Corner Block |
NXOpen.MechanicalRouting.PathStockPreferenceBuilder | Assigns stocks to segments based on user's criteria and the current default stock |
NXOpen.MechanicalRouting.PathTransitionBuilderList | Represents a list of objects |
NXOpen.Mechatronics.ExternalConnectionElementBuilderList | Represents a list of objects |
NXOpen.Mechatronics.GanttOperationConditionBuilderList | Represents a list of objects |
NXOpen.Mechatronics.GanttOperationParameterBuilderList | Represents a list of objects |
NXOpen.Mechatronics.MATLABSignalConnectionBuilderList | Represents a list of objects |
NXOpen.Mechatronics.PathConstraintFrameBuilder | Represents a frame that constrains the orientation along the path curve |
NXOpen.Mechatronics.PathConstraintFrameBuilderList | Represents a list of objects |
NXOpen.Mechatronics.ProxyObjectParameterBuilderList | Represents a list of objects |
NXOpen.Mechatronics.RuntimeFormulaParameterBuilderList | Represents a list of objects |
NXOpen.Mechatronics.SelectAdapterSignal | Represents a single object selection |
NXOpen.Mechatronics.SelectCollisionSensor | Represents a single object selection |
NXOpen.Mechatronics.SelectCollisionSensorList | Represents a list of objects on a selection list |
NXOpen.Mechatronics.SelectHydraulicCylinderList | Represents a list of objects on a selection list |
NXOpen.Mechatronics.SelectLogicObjectList | Represents a list of objects on a selection list |
NXOpen.Mechatronics.SelectPhysicsConstraint | Represents a single object selection |
NXOpen.Mechatronics.SelectPhysicsJoint | Represents a single object selection |
NXOpen.Mechatronics.SelectPneumaticCylinderList | Represents a list of objects on a selection list |
NXOpen.Mechatronics.SelectRigidBody | Represents a single object selection |
NXOpen.Mechatronics.SelectSystemObject | Represents a single object selection |
NXOpen.Mechatronics.SelectTagFormObject | Represents a single object selection |
NXOpen.Mechatronics.SensorsActuatorsListBuilderList | Represents a list of objects |
NXOpen.Mechatronics.SHMSignalConnectionBuilderList | Represents a list of objects |
NXOpen.Mechatronics.SignalConnectionBuilderList | Represents a list of objects |
NXOpen.Mechatronics.SignalMappingConnectionBuilderList | Represents a list of objects |
NXOpen.ModelingViewList | Represents a list of objects |
NXOpen.ModlDirect.SelectBlend | Represents a NXOpen.ModlDirect.SelectBlend Allows user to specify blend faces |
NXOpen.Motion.AdamsSolverProperty | Represents a NXOpen.Motion.AdamsSolverProperty |
NXOpen.Motion.BushingActuatorCoefficients | Represents a Motion BushingActuatorCoefficients |
NXOpen.Motion.BushingCoefficients | Represents a Motion BushingCoefficients |
NXOpen.Motion.BushingCylindricalCoefficients | Represents a Motion BushingCylindricalCoefficients |
NXOpen.Motion.BushingCylindricalCoefficientsComponent | Represents a Motion BushingCylindricalCoefficientsComponent |
NXOpen.Motion.BushingDampingCoefficients | Represents a Motion BushingDampingCoefficients |
NXOpen.Motion.BushingDefine | Represents a Motion BushingDefine |
NXOpen.Motion.BushingGeneralCoefficients | Represents a Motion BushingGeneralCoefficients |
NXOpen.Motion.BushingGeneralCoefficientsComponent | Represents a Motion BushingGeneralCoefficientsComponent |
NXOpen.Motion.BushingSphericalCoefficients | Represents a Motion BushingSphericalCoefficients |
NXOpen.Motion.BushingSphericalCoefficientsComponent | Represents a Motion BushingSphericalCoefficientsComponent |
NXOpen.Motion.BushingStiffnessCoefficients | Represents a Motion BushingStiffnessCoefficients |
NXOpen.Motion.ConfigurationParameter | Represents a Motion.ConfigurationParameter |
NXOpen.Motion.ConfigurationParameterList | Represents a list of objects |
NXOpen.Motion.ControlInputPortBuilderList | Represents a list of objects |
NXOpen.Motion.CustomizedMaterialBuilder | Represents a Motion.CustomizedMaterialBuilder |
NXOpen.Motion.DriverMotionsData | Represents a NXOpen.Motion.DriverMotionsData |
NXOpen.Motion.DriverMultiOperations | Represents a NXOpen.Motion.DriverMultiOperations |
NXOpen.Motion.DriverOperation | Represents a NXOpen.Motion.DriverOperation |
NXOpen.Motion.ExpressionFunctionBuilder | Represents a ExpressionFunctionBuilder builder |
NXOpen.Motion.FlexPhysicalDampingSettings | Represents the physical damping settings for flexible body |
NXOpen.Motion.InputPortAssociationList | Represents a list of objects |
NXOpen.Motion.JointDefine | Represents a joint define object |
NXOpen.Motion.JointFriction | Represents a joint friction object |
NXOpen.Motion.JointFrictionAdams | Represents a adams joint friction object |
NXOpen.Motion.JointFrictionLms | Represents a lms joint friction object |
NXOpen.Motion.JointFrictionRecurDyn | Represents a recurdyn joint friction object |
NXOpen.Motion.LinkAttachmentData | Represents a Motion.LinkAttachmentData |
NXOpen.Motion.LinkCouplerCoupleBuilder | Represents a NXOpen.Motion.LinkCouplerCoupleBuilder |
NXOpen.Motion.LinkInitialVelocity | Represents a NXOpen.Motion.LinkInitialVelocity |
NXOpen.Motion.LinkMassProperty | Represents a NXOpen.Motion.LinkMassProperty |
NXOpen.Motion.LmsSolverProperty | Represents a NXOpen.Motion.LmsSolverProperty |
NXOpen.Motion.MarkerToNodeData | Represents the marker to node data which is a list item in NXOpen.Motion.FlexBodyBuilder |
NXOpen.Motion.OutputPortAssociationList | Represents a list of objects |
NXOpen.Motion.PortAssociation | Represents a Motion.PortAssociation |
NXOpen.Motion.PortVariable | Represents a Motion.PortVariable |
NXOpen.Motion.PortVariableList | Represents a list of objects |
NXOpen.Motion.RecurdynSolverProperty | Represents a NXOpen.Motion.RecurdynSolverProperty |
NXOpen.Motion.ResultMeasure | Represents a result measure motion object |
NXOpen.Motion.SegmentBuilder | Represents a NXOpen.Motion.SegmentBuilder , only creation is supported |
NXOpen.Motion.SegmentBuilderList | Represents a list of objects |
NXOpen.Motion.SelectAnalyticalContactProperty | Represents a single object selection |
NXOpen.Motion.SelectBaseSection | Represents a single object selection |
NXOpen.Motion.SelectControlPort | Represents a single object selection |
NXOpen.Motion.SelectFieldData | Represents a single object selection |
NXOpen.Motion.SelectJoint | Represents a single object selection |
NXOpen.Motion.SelectLink | Represents a single object selection |
NXOpen.Motion.SelectMarker | Represents a single object selection |
NXOpen.Motion.SelectRoad | Represents a single object selection |
NXOpen.Motion.SelectSplineBeamProperty | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyBasic | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyCd | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyFt | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyMotorcycle | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyNonInertial | Represents a single object selection |
NXOpen.Motion.SelectTirePropertyTno | Represents a single object selection |
NXOpen.Motion.SignalChartListItem | Represents a SignalChartListItem, List Item inside a SignalChartBuilder |
NXOpen.Motion.SignalChartListItemList | Represents a list of objects |
NXOpen.Motion.TirePropertyAdvancedParameters | Represents a TirePropertyAdvancedParameters builder |
NXOpen.Motion.TirePropertyBasicParameters | Represents a TirePropertyBasicParameters builder |
NXOpen.Motion.TirePropertyHighOrderParameters | Represents a Tire Property builder for the High Order parameters used in Motorcycle and Basic properties |
NXOpen.Motion.VObject | Represents a VObject |
NXOpen.NavigatorFilter | Represents a NXOpen.NavigatorFilter object |
NXOpen.Routing.Electrical.ElectricalNavigatorFilter | Represents a Routing Electrical Navigator Filter object |
NXOpen.NXObject | A base class providing low-level services for most NXOpen classes |
NXOpen.NXObjectList | Represents a list of objects |
NXOpen.ObjectList | Represents a list of objects |
NXOpen.PartFamily.Instance | Represents an instance of a part family member |
NXOpen.PartFamily.InstanceSelectionCriteria | Represents the selection criteria of a part family instance |
NXOpen.PDM.EffectivityTableBuilder | Represents a builder class for effectivity configuration |
NXOpen.PDM.PartOperationImportCallbackData | JA interface for PartOperationImportCallbackData object |
NXOpen.PDM.SaveAsReviseCallbackData | JA interface for SaveAsReviseCallbackData object |
NXOpen.PDM.VariantConfigurationBuilder | Represents a builder class that performs variant rule configuration |
NXOpen.PID.PreferencesAnnotationBuilder | Represents a PreferencesAnnotationBuilder |
NXOpen.PID.PreferencesConnectionBuilder | Represents a PreferencesConnectionBuilder |
NXOpen.PID.PreferencesGeneralBuilder | Represents a PreferencesGeneralBuilder |
NXOpen.PID.PreferencesOffSheetConnectorBuilder | Represents a PreferencesOffSheetConnectorBuilder |
NXOpen.PlaneList | Represents a list of objects |
NXOpen.PointList | Represents a list of objects |
NXOpen.Positioning.MatingConverter | An instance of this class can be used to convert Mating Conditions to Assembly Constraints in its owning assembly or in child parts of its owning assembly |
NXOpen.PressLineSimulation.HydraulicLifterBuilderList | Represents a list of objects |
NXOpen.PressLineSimulation.LinearCamBuilderList | Represents a list of objects |
NXOpen.PressLineSimulation.MachineAdjustmentBuilderList | Represents a list of objects |
NXOpen.PressLineSimulation.MountPointBuilderList | Represents a list of objects |
NXOpen.PressLineSimulation.RotaryCamBuilderList | Represents a list of objects |
NXOpen.PressLineSimulation.UserMotionBuilderList | Represents a list of objects |
NXOpen.RegionPointList | Represents a list of objects |
NXOpen.RemoteUtilities | This class is primarily designed for use in a remote session, and allows client applications to access resources on a remote server |
NXOpen.Report.BaseArgument | Represents an abstract command argument |
NXOpen.Report.CommandLibrary | Represents a command library in the command manager |
NXOpen.Report.ImageOption | Represents an image option object |
NXOpen.Report.ProgramInformation | Represents the program information for command automation |
NXOpen.Report.ReportPreference | Manages the preference data |
NXOpen.Report.UserInput | Represents a user input in command |
NXOpen.Routing.ChoosePartPluginData | Data object created by Routing for use by the Choose Part plugin called by the Place Part command |
NXOpen.Routing.CornerTypeBuilder | Contains setting for corner creation |
NXOpen.Routing.Electrical.ElectricalFormat | Represents a Routing Electrical ElectricalFormat |
NXOpen.Routing.Electrical.SortConnectionsPluginData | Data object created by Routing just before routing connections |
NXOpen.Routing.RouteObjectCollector | Represents a NXOpen.Routing.RouteObjectCollector class to create objects for getting routing objects |
NXOpen.Routing.RoutePartDescriptor | Represents a part descriptor chrx |
NXOpen.Routing.RunItemsBuilderList | Represents a list of objects |
NXOpen.Routing.SelectControlPoint | Represents a single object selection |
NXOpen.Routing.SelectISegment | Represents a single object selection |
NXOpen.Routing.SelectLineSegment | Represents a single object selection |
NXOpen.Routing.SelectPort | Represents a single object selection |
NXOpen.Routing.SelectRun | Represents a single object selection |
NXOpen.Routing.SelectStock | Represents a single object selection |
NXOpen.ScCollectorList | Represents a list of objects |
NXOpen.SectionList | Represents a list of objects |
NXOpen.SelectBody | Represents a single object selection |
NXOpen.SelectBodyList | Represents a list of objects on a selection list |
NXOpen.SelectCartesianCoordinateSystem | Represents a single object selection |
NXOpen.SelectCoordinateSystem | Represents a single object selection |
NXOpen.SelectCoordinateSystemList | Represents a list of objects on a selection list |
NXOpen.SelectCurve | Represents a single object selection |
NXOpen.SelectCurveList | Represents a list of objects on a selection list |
NXOpen.SelectDatumPlane | Represents a single object selection |
NXOpen.SelectDatumPlaneList | Represents a list of objects on a selection list |
NXOpen.SelectDisplayableObject | Represents a single object selection |
NXOpen.SelectDisplayableObjectList | Represents a list of objects on a selection list |
NXOpen.SelectEdge | Represents a single object selection |
NXOpen.SelectEdgeList | Represents a list of objects on a selection list |
NXOpen.SelectExpressionList | Represents a list of objects on a selection list |
NXOpen.SelectFace | Represents a single object selection |
NXOpen.SelectFaceList | Represents a list of objects on a selection list |
NXOpen.SelectGroup | Represents a single object selection |
NXOpen.SelectIBaseCurve | Represents a single object selection |
NXOpen.SelectIBaseCurveList | Represents a list of objects on a selection list |
NXOpen.SelectIBasePlaneList | Represents a list of objects on a selection list |
NXOpen.SelectIBody | Represents a single object selection |
NXOpen.SelectICurve | Represents a single object selection |
NXOpen.SelectICurveList | Represents a list of objects on a selection list |
NXOpen.SelectINXObjectList | Represents a list of objects on a selection list |
NXOpen.SelectIParameterizedSurface | Represents a single object selection |
NXOpen.SelectIParameterizedSurfaceList | Represents a list of objects on a selection list |
NXOpen.SelectIReferenceAxis | Represents a single object selection |
NXOpen.SelectISurface | Represents a single object selection |
NXOpen.SelectLine | Represents a single object selection |
NXOpen.SelectModelingViewList | Represents a list of objects on a selection list |
NXOpen.SelectNXObject | Represents a single object selection |
NXOpen.SelectNXObjectList | Represents a list of objects on a selection list |
NXOpen.SelectObject | Represents a single object selection |
NXOpen.SelectObjectList | Represents a list of objects on a selection list |
NXOpen.SelectPart | Represents a single object selection |
NXOpen.SelectPartList | Represents a list of objects on a selection list |
NXOpen.SelectPoint | Represents a single object selection |
NXOpen.SelectPointList | Represents a list of objects on a selection list |
NXOpen.SelectSketch | Represents a single object selection |
NXOpen.SelectSmartObject | Represents a single object selection |
NXOpen.SelectSpline | Represents a single object selection |
NXOpen.SelectSplineList | Represents a list of objects on a selection list |
NXOpen.SelectTaggedObject | Represents a single object selection |
NXOpen.SelectTaggedObjectList | Represents a list of objects on a selection list |
NXOpen.SelectView | Represents a single object selection |
NXOpen.SelectViewList | Represents a list of objects on a selection list |
NXOpen.SheetMetal.FlatPatternSettings | Provides access to object and callout properties for sheet-metal data in flat pattern views on drawings |
NXOpen.SIM.KinematicChainList | Represents a list of objects |
NXOpen.SIM.KinematicChannelBuilder | This class is used for add kinematic channel to the channel configuratation list |
NXOpen.SIM.KinematicChannelBuilderList | Represents a list of objects |
NXOpen.SIM.KinematicJunctionBuilderList | Represents a list of objects |
NXOpen.SIM.TimeAnalysis | Represents the TimeAnalysis class object |
NXOpen.SketchEvaluator | Represents a sketch-on-path evaluator |
NXOpen.SketchExpressionModifierBuilder | Represents a Sketch Expression Modifier Builder |
NXOpen.TableEditorDefaultDataProvider | Provides basic data for a Table Editor block |
NXOpen.TaggedObjectList | Represents a list of objects |
NXOpen.TextColorFontWidthBuilder | Represent a NXOpen.TextColorFontWidthBuilder |
NXOpen.Tooling.AutoDieGroup | Represents a group for Auto Stamping Die |
NXOpen.Tooling.BomListDataProvider | Provides basic data for BOM List |
NXOpen.Tooling.CostTableDataProvider | Provides basic data for cost feature table data |
NXOpen.Tooling.DefineNeutralFactorBuilder | Represeents a NXOpen.Tooling.DefineNeutralFactorBuilder to define neutral factor according to material and formula in the spreadsheet table |
NXOpen.Tooling.SelectReuseLibraryItemBuilder | Select a part from the reuse library |
NXOpen.AME.SelectClassificationBuilder | Select a part from the reuse library |
NXOpen.Mechatronics.SelectClassificationBuilder | Select a classification from the reuse library |
NXOpen.Tooling.SelectReuseLibraryListBuilder | Select a list of objects from the reuse library |
NXOpen.Tooling.SelectReuseLibraryListItemBuilder | Select reuse library list item |
NXOpen.Tooling.SelectReuseLibraryListItemBuilderList | Represents a list of objects |
NXOpen.Tooling.ShimInnerProfileSetBuilderList | Represents a list of objects |
NXOpen.TreeListNode | Represents a TreeList Node Object |
NXOpen.PDM.PdmNavigatorNode | Represents a PdmNavigatorNode |
NXOpen.UI | This class contains the various elements that represent the NX User Interface |
NXOpen.Validate.Parser | Represents a NX NXOpen.Validate.Parser |
NXOpen.Validate.Validator | Represents a NX NXOpen.Validate.Validator |
NXOpen.Validate.ValidatorOptions | Contains information about run options of check-mate checking process |
NXOpen.Weld.ConnectionFinderBuilder | Represents a builder to display, manage, delete, and allow the user to reparent face information for the weld objects |
NXOpen.Weld.DatumIconBuilder | Represents a NXOpen.Weld.DatumIconBuilder class used to control the part navigator icon for Datum Pin and Surface Locators |
NXOpen.Weld.JointItemBuilder | Used to create or edit a Weld.WeldJoint feature |
NXOpen.Weld.JointItemBuilderList | Represents a list of objects |
NXOpen.Weld.JointmarkFaceSetsBuilder | Used to create or edit a set of faces for Jointmark |
NXOpen.Weld.JointmarkFaceSetsBuilderList | Represents a list of objects |
NXOpen.Weld.JointmarkGuideBuilder | Used to create or edit a guide curve for Jointmark |
NXOpen.Weld.JointmarkGuideBuilderList | Represents a list of objects |
NXOpen.Weld.JointmarkPointsBuilder | Used to create or edit a point in the list of points for Jointmark |
NXOpen.Weld.JointmarkPointsBuilderList | Represents a list of objects |
NXOpen.Weld.SelectDatumPin | Represents a single object selection |
NXOpen.Weld.SelectDatumSurface | Represents a single object selection |
NXOpen.Weld.WeldBeadPathBuilder | Represents the path the bead shape will be swept along |
NXOpen.Weld.WeldBeadPathBuilderList | Represents a list of objects |
NXOpen.Weld.WeldBeadSizeBuilder | This builder is used to define the bead shape |
NXOpen.Weld.WeldBeadSizeBuilderList | Represents a list of objects |
NXOpen.Weld.WeldFillStripBuilderList | Represents a list of objects |
NXOpen.Weld.WeldObjectBuilder | Represents a NXOpen.Weld.WeldObjectBuilder class used to collect welding objects created or edited from a command |
NXOpen.Weld.WeldPointExitBuilder | Represents a NXOpen.Weld.WeldPointExitBuilder class used to pass welding object from the Weld Point command to a user callback |
NXOpen.WidthDefinition | Represents a NXOpen.WidthDefinition , which is a representation of an NX width palette |
TaggedObjectCollection | |
NXOpen.Annotations.BendTableCollection | Represents a collection of NXOpen.Annotations.BendTable objects |
NXOpen.Annotations.BusinessModifierCollection | Represents a collection of NXOpen.Annotations.BusinessModifier objects |
NXOpen.Annotations.CenterlineCollection | Represents a collection of NXOpen.Annotations.Centerline objects |
NXOpen.Annotations.CustomSymbolCollection | Represents a collection of NXOpen.Annotations.BaseCustomSymbol objects |
NXOpen.Annotations.DatumTargetCollection | Represents a collection of NXOpen.Annotations.DatumTarget objects |
NXOpen.Annotations.DimensionCollection | Represents a collection of NXOpen.Annotations.Dimension objects |
NXOpen.Annotations.DimensionSetCollection | Represents a collection of NXOpen.Annotations.DimensionSet objects |
NXOpen.Annotations.DraftingDatumTargetCollection | Represents a collection of NXOpen.Annotations.DraftingDatumTarget objects |
NXOpen.Annotations.DraftingImageCollection | Represents a collection of NXOpen.Annotations.DraftingImage objects |
NXOpen.Annotations.DraftingSurfaceFinishCollection | Represents a collection of NXOpen.Annotations.DraftingSurfaceFinish objects |
NXOpen.Annotations.FcfCollection | Represents a collection of NXOpen.Annotations.Fcf objects |
NXOpen.Annotations.FrameBarCollection | Represents a collection of NXOpen.Annotations.FrameBar objects |
NXOpen.Annotations.GdtCollection | Represents a collection of GDTs |
NXOpen.Annotations.GdtDatumCollection | Represents a collection of NXOpen.Annotations.Datum objects |
NXOpen.Annotations.HatchCollection | Represents a collection of NXOpen.Annotations.Hatch objects |
NXOpen.Annotations.HoleTableCollection | Represents a collection of NXOpen.Annotations.HoleTable objects |
NXOpen.Annotations.IdSymbolCollection | Represents a collection of NXOpen.Annotations.IdSymbol objects |
NXOpen.Annotations.IntersectionSymbolCollection | Represents a collection of NXOpen.Annotations.IntersectionSymbol objects |
NXOpen.Annotations.LabelCollection | Represents a collection of labels |
NXOpen.Annotations.NoteCollection | Represents a collection of notes |
NXOpen.Annotations.OffsetCenterPointCollection | Represents a collection of NXOpen.Annotations.OffsetCenterPoint objects |
NXOpen.Annotations.OrdinateMarginCollection | Represents a collection of NXOpen.Annotations.OrdinateMargin |
NXOpen.Annotations.PartSymbolFolderCollection | Represents a collection of NXOpen.Annotations.PartSymbolFolder objects |
NXOpen.Annotations.PmiAttributeCollection | Represents a collection of NXOpen.Annotations.PmiAttribute objects |
NXOpen.Annotations.PmiCollection | Represents a collection of NXOpen.Annotations.Pmi objects |
NXOpen.Annotations.PmiFilterCollection | Represents the collection of all PMI filters in the part |
NXOpen.Annotations.PmiLightweightSectionCollection | Represents a collection of NXOpen.Annotations.LightweightSection objects |
NXOpen.Annotations.PmiRegionCollection | Represents a collection of NXOpen.Annotations.Region objects |
NXOpen.Annotations.PmiTableSectionCollection | Represents a collection of NXOpen.Annotations.PmiTableSection objects |
NXOpen.Annotations.PmiWaveCollection | Represents a collection of NXOpen.Annotations.PmiWave objects |
NXOpen.Annotations.SearchModelViewCollection | Represents a collection of NXOpen.Annotations.SearchModelView objects |
NXOpen.Annotations.ShipDimensionCollection | Represents a collection of NXOpen.Annotations.Dimension objects |
NXOpen.Annotations.SymbolFileCollection | Represents a collection of NXOpen.Annotations.SymbolFile objects |
NXOpen.Annotations.TableCollection | Represents a collection of NXOpen.Annotations.Table objects |
NXOpen.Annotations.TableSectionCollection | Represents a collection of NXOpen.Annotations.TableSection objects |
NXOpen.Annotations.TargetPointCollection | Represents a collection of NXOpen.Annotations.TargetPoint objects |
NXOpen.Annotations.TitleBlockCollection | Represents a collection of NXOpen.Annotations.TitleBlock |
NXOpen.Annotations.WeldCollection | Represents a collection of NXOpen.Annotations.Weld objects |
NXOpen.ArcCollection | Represents a collection of arcs |
NXOpen.Assemblies.ArrangementCollection | a collection of arrangements |
NXOpen.Assemblies.ClearanceSetCollection | Represents NXOpen.Assemblies.ClearanceSetCollection |
NXOpen.Assemblies.ComponentGroupCollection | Contains a collection of Component Groups a NXOpen.Assemblies.ComponentGroup that are defined within an Assembly part |
NXOpen.Assemblies.ComponentPatternCollection | Represents the collection object for all component patterns |
NXOpen.Assemblies.DrawingExplosionCollection | Represents a collection of drawing explosions |
NXOpen.Assemblies.ExplosionCollection | Represents a collection of explosions |
NXOpen.Assemblies.OrderCollection | a collection of NXOpen.Assemblies.Order s |
NXOpen.Assemblies.RelinkerCollection | Represents a collection of relinker |
NXOpen.Assemblies.SearchResultCollection | A collection of NXOpen.Assemblies.SearchResultElement s |
NXOpen.Assemblies.SubsetCollection | Represents a collection of subset |
NXOpen.Assemblies.SubsetRecipe | A subset recipe is used by a NXOpen.Assemblies.SubsetBuilder to collect NXOpen.Assemblies.SearchTerm s |
NXOpen.AxisCollection | Represents a collection of NXOpen.Axis |
NXOpen.BodyCollection | Represents a collection of bodies in a part |
NXOpen.BodyDes.OnestepUnformCollection | Represents a collection of OnestepUnform |
NXOpen.CAE.AdaptivityExclusionZoneCollection | Represents a collection of correl meta solution |
NXOpen.CAE.AdaptivityMetaSolutionCollection | Represents a collection of adaptivity meta solution |
NXOpen.CAE.AeroStructures.LoadCaseCollection | Represents a collection of AeroStruct LoadCases |
NXOpen.CAE.AeroStructures.LoadCaseSetCollection | Represents a collection of AeroStruct LoadCases |
NXOpen.CAE.AeroStructures.MarginCalculationCollection | Represents a collection of CAE.AeroStructures.MarginCalculation |
NXOpen.CAE.AeroStructures.MarginSolutionCollection | Represents a collection of margin solution |
NXOpen.CAE.AtvSetCollection | This class is a collection of NXOpen.CAE.AtvSet |
NXOpen.CAE.BeamSectionCollection | Represents the collection of all NXOpen.CAE.BeamSection in a fem part |
NXOpen.CAE.BoltCollection | Provides method for creating builder for bolt operation commands in a fem/afem part |
NXOpen.CAE.CAEConnectionCollection | Provides method for creating builder for connection operation commands in a fem/afem part |
NXOpen.CAE.CaeDOFSetCollection | Provides methods for managing DOFSet NXOpen.CAE.CaeDOFSet |
NXOpen.CAE.CaeGroupCollection | Provides methods for managing set NXOpen.CAE.CaeGroup |
NXOpen.CAE.CaeRegionCollection | Provides methods for managing CAE.CaeRegion in a sim part |
NXOpen.CAE.CfdAutoRefinementConstraintCollection | Provides methods for managing automatic refinement constraintsCAE.CfdAutoRefinementConstraint in a fem part |
NXOpen.CAE.CfdContactPreventionConstraintCollection | Provides methods for managing Contact Prevention ConstraintsCAE.CfdContactPreventionConstraint in a fem part |
NXOpen.CAE.CfdLocalResolutionConstraintCollection | Provides methods for managing Local Resolution ConstraintsCAE.CfdLocalResolutionConstraint in a fem part |
NXOpen.CAE.CompanionResultCollection | Provides methods for managing CompanionResults NXOpen.CAE.CompanionResult in a NXOpen.CAE.SimResultReference |
NXOpen.CAE.Connections.ElementCollection | Element collection provides methods to manage CAE.Connections.Element objects |
NXOpen.CAE.CorrelSolutionCollection | Represents a collection of correl meta solution |
NXOpen.CAE.DataProcessingBlockCollection | Represents a collection of DPM events |
NXOpen.CAE.DataProcessingCollection | Represents a collection of Data Processing meta solution |
NXOpen.CAE.DataSourceCollection | This class is a collection of NXOpen.CAE.DataSource |
NXOpen.CAE.DurabilityAxisSearchCollection | Represents a collection of stress axes |
NXOpen.CAE.DurabilityEventCollection | Represents a collection of durability events |
NXOpen.CAE.DurabilityExcitationCollection | Represents a collection of durability excitations |
NXOpen.CAE.DurabilityFatigueCollection | Represents a collection of event fatigue settings |
NXOpen.CAE.DurabilityMetaSolutionCollection | Represents a collection of correl meta solution |
NXOpen.CAE.DurabilityRandomFatigueCollection | Represents a collection of random fatigue |
NXOpen.CAE.DurabilitySolveOptionsCollection | Represents a collection of correl meta solution |
NXOpen.CAE.DurabilityStrengthCollection | Represents a collection of event strength settings |
NXOpen.CAE.FluidDomainCollection | Provides methods for managing fluid domainsNXOpen.CAE.FluidDomainRecipe in a fem part |
NXOpen.CAE.FrfSetCollection | This class is a collection of NXOpen.CAE.FrfSet |
NXOpen.CAE.FunctionCollection | Represents a collection of function objects |
NXOpen.CAE.GeometryRecipeCollection | Provides methods for managing set NXOpen.CAE.GeometryRecipe |
NXOpen.CAE.LaminateDynamicEventCollection | Represents a collection of laminate dynamic events |
NXOpen.CAE.LaminateDynamicSimCollection | Represents a collection of laminate dynamic sims |
NXOpen.CAE.LaminateExtrudeSetupCollection | Represents a collection of laminate extrusion setups |
NXOpen.CAE.LaminateGlobalLayupCollection | Represents a global layup, which is defined by a sequence of NXOpen.CAE.LaminateGlobalLayup , each with a name and a list of plies |
NXOpen.CAE.LaminateGlobalLayupPlyGroupCollection | Represents a laminate layup in the global layup context (ply based modeling), which is defined by a sequence of NXOpen.CAE.LaminatePlyGroup , each with a name and a list of plies |
NXOpen.CAE.LaminateGraphicalReportCollection | Represents a collection of CAE.LaminateGraphicalReport |
NXOpen.CAE.LaminateLayupOffsetCollection | Represents a collection of layup offset rules |
NXOpen.CAE.LaminateMatOrientationCollection | Represents a collection of layup growth rules |
NXOpen.CAE.LaminateModePropertyCollection | Represents a collection of laminate mode properties |
NXOpen.CAE.LaminatePlyCollection | Represents a list of plies, which have a material, a thickness, an orientation, and a color |
NXOpen.CAE.LaminatePlyGroupCollection | Represents a laminate layup, which is defined by a sequence of CAE.LaminatePlyGroup , each with a name and a list of plies |
NXOpen.CAE.LaminatePostReportCollection | Represents a collection of laminate post reports |
NXOpen.CAE.LaminateQuickReportCollection | Represents a collection of CAE.LaminateQuickReport |
NXOpen.CAE.LaminateSpreadsheetReportCollection | Represents a collection of NXOpen.CAE.LaminateSpreadsheetReport |
NXOpen.CAE.LayoutStateCollection | This class is a collection of NXOpen.CAE.LayoutState |
NXOpen.CAE.LayoutStateDataReferenceCollection | This class is a collection of NXOpen.CAE.LayoutStateDataReference |
NXOpen.CAE.MeshControlCollection | Provides methods for managing mesh controlsNXOpen.CAE.MeshControl in a fem part |
NXOpen.CAE.MeshPointCollection | Provides methods for managing constraints NXOpen.CAE.MeshPoint in a sim part |
NXOpen.CAE.ModelCheck.ElementQualitySettingCollection | Represents a collection of NXOpen.CAE.ModelCheck.ElementQualitySetting in a cae part |
NXOpen.CAE.ModelingObjectPropertyTableCollection | Creates Modeling Object property tablesNXOpen.CAE.ModelingObjectPropertyTable in a fem model |
NXOpen.CAE.ModelUpdateDesignVariablesCollection | Represents a collection of durability events |
NXOpen.CAE.ModelUpdateSolutionCollection | Represents a collection of model update meta solution |
NXOpen.CAE.ModeSetCollection | This class is a collection of NXOpen.CAE.ModeSet |
NXOpen.CAE.NoteCollection | Represents a collection of CAE notes |
NXOpen.CAE.NoteManager | Represents an object that manages annotation for CAE |
NXOpen.CAE.Optimization.DAOConstraintCollection | Represents the collection of optimization solution design constraint |
NXOpen.CAE.Optimization.DAODesignVariableCollection | Represents the collection of optimization solution design variable |
NXOpen.CAE.Optimization.DAOSolutionCollection | Represents the collection of optimization solution |
NXOpen.CAE.Optimization.TBSConstraintCollection | Represents a collection of NXOpen.CAE.Optimization.TBSConstraint |
NXOpen.CAE.Optimization.TBSDesignVariableCollection | Represents a collection of CAE.Optimization.TBSDesignVariable |
NXOpen.CAE.Optimization.TBSOptimizationSolutionCollection | Represents a collection of NXOpen.CAE.Optimization.TBSOptimizationSolution |
NXOpen.CAE.Optimization.TBSRestrictAreaCollection | Represents a collection of NXOpen.CAE.Optimization.TBSRestrictArea |
NXOpen.CAE.Optimization.TBSSmoothCollection | Represents a collection of NXOpen.CAE.Optimization.TBSSmooth |
NXOpen.CAE.PhysicalPropertyTableCollection | Creates physical property tablesNXOpen.CAE.PhysicalPropertyTable in a fem model |
NXOpen.CAE.PostScenarioAvailableDescriptorCollection | A collection of NXOpen.CAE.PostScenarioDescriptor s |
NXOpen.CAE.PostScenarioBuilderDataDefinitionCollection | This is a collection of NXOpen.CAE.PostScenarioDataDefinition available to a NXOpen.CAE.PostScenarioBuilder for a selected Data Source |
NXOpen.CAE.PostScenarioBuilderSlotCollection | This class is a collection of NXOpen.CAE.PostScenarioBuilderSlot |
NXOpen.CAE.PostScenarioConfigurationVariableCollection | This class is a collection of NXOpen.CAE.PostScenarioConfigurationVariable |
NXOpen.CAE.PostScenarioDescriptorCollection | This class is a collection of NXOpen.CAE.PostScenarioDescriptor |
NXOpen.CAE.PostScenarioInputDefinitionCollection | This class is a collection of NXOpen.CAE.PostScenarioInputDefinition |
NXOpen.CAE.PostScenarioMeshDefinitionCollection | Represents a collection of Mesh Definitions available in a certain Scenario Definition's Input Definition |
NXOpen.CAE.PostScenarioVariableCollection | This class is a collection of NXOpen.CAE.PostScenarioVariable |
NXOpen.CAE.PostScenarioVisualizationCollection | Represents a collection of Visualizations available in a certain Scenario Definition's Input Definition |
NXOpen.CAE.PreTestExciterConfigCollection | Represents a collection of exciter selection configuration |
NXOpen.CAE.PreTestExciterSelectionDofSetCollection | Represents a collection of exciter selection configuration |
NXOpen.CAE.PreTestSensorConfigCollection | Represents a collection of sensor selection configuration |
NXOpen.CAE.PreTestSensorSelectionDofSetCollection | Represents a collection of sensor selection configuration |
NXOpen.CAE.PreTestSolutionCollection | Represents a collection of pre-test setups |
NXOpen.CAE.ResponseSimulation.ExcitationCollection | Represents a collection of excitation objects |
NXOpen.CAE.ResponseSimulation.RSEventCollection | Represents a collection of response analysis event |
NXOpen.CAE.ResponseSimulation.SensorCollection | Represents a collection of response analysis sensor |
NXOpen.CAE.ResponseSimulation.SolutionCollection | Represents a collection of response analysis meta solution |
NXOpen.CAE.ResponseSimulation.StrainGageCollection | Represents a collection of response analysis strain gage |
NXOpen.CAE.ResultMeasureCollection | Provides methods for managing ResultMeasures NXOpen.CAE.ResultMeasure |
NXOpen.CAE.SelectionRecipeCollection | Provides methods for managing Selection Recipes NXOpen.CAE.SelectionRecipe |
NXOpen.CAE.SimConditionCollection | This class is a collection of NXOpen.CAE.SimCondition |
NXOpen.CAE.SimConditionParamCollection | This class is a collection of NXOpen.CAE.SimConditionParam which represents a measurable environment |
NXOpen.CAE.SimConditionSequenceCollection | This class is a collection of NXOpen.CAE.SimConditionSequence |
NXOpen.CAE.SimConditionTimeStepCollection | This class is a collection of NXOpen.CAE.SimConditionTimeStep |
NXOpen.CAE.SimConstraintCollection | Provides methods for managing constraints NXOpen.CAE.SimConstraint in a sim part |
NXOpen.CAE.SimConstraintSetCollection | Provides methods for managing SimConstraintSet in a sim part |
NXOpen.CAE.SimLbcFolderCollection | Provides methods for managing LbcFolders NXOpen.CAE.SimLbcFolder in a sim part |
NXOpen.CAE.SimLoadCollection | Provides methods for managing loads NXOpen.CAE.SimLoad in a sim part |
NXOpen.CAE.SimLoadRecipeCollection | This class is a collection of NXOpen.CAE.SimLoadRecipe |
NXOpen.CAE.SimLoadRecipeMapEntryCollection | This class is a collection of NXOpen.CAE.SimLoadRecipeMapEntry s |
NXOpen.CAE.SimLoadRecipeMappingCollection | This class is a collection of NXOpen.CAE.SimLoadRecipeMapping s |
NXOpen.CAE.SimLoadRecipeSourceCollection | This class is a collection of NXOpen.CAE.SimLoadRecipeSource |
NXOpen.CAE.SimLoadSetCollection | Provides methods for managing NXOpen.CAE.SimLoadSet in a sim part |
NXOpen.CAE.SimRecipeCollection | Provides methods for managing NXOpen.CAE.SimRecipe in a sim part |
NXOpen.CAE.SimSimulationObjectCollection | Provides methods for managing simulation objects NXOpen.CAE.SimSimulationObject in a sim part |
NXOpen.CAE.SimSolutionCollection | Provides methods for managing Solutions NXOpen.CAE.SimSolution in a NXOpen.CAE.SimSimulation |
NXOpen.CAE.SketchCurvesCollection | Represents the collection of all NXOpen.CAE.SketchCurves in a fem part |
NXOpen.CAM.CAMAttributeCollection | Represents the CAM Attribute collection |
NXOpen.CAM.CAMFeatureCollection | Represents the CAMFeature collection |
NXOpen.CAM.InspectionGroupCollection | Represents the group collection for CMM Inspection |
NXOpen.CAM.InspectionMoveCollection | Represents the Inspection move collection |
NXOpen.CAM.InspectionMoveSubopCollection | Represents the Inspection move collection contained by point set subops |
NXOpen.CAM.InspectionOperationCollection | Represents the CMM Inspection operation collection |
NXOpen.CAM.InspectionTrackPointCollection | Represents the inspection track point collection |
NXOpen.CAM.MoveCollection | Represents the move collection |
NXOpen.CAM.NCGroupCollection | Represents the ncgroup collection |
NXOpen.CAM.OperationCollection | Represents the operation collection |
NXOpen.CAM.TrackPointCollection | Represents the track point collection |
NXOpen.CollaborativeDesignCollection | A collection of collaborative designs |
NXOpen.CoordinateSystemCollection | Represents a collection of NXOpen.CoordinateSystem |
NXOpen.CurveCollection | Represents a collection of NXOpen.Curve |
NXOpen.CutViewCollection | Represents a collection of NXOpen.CutView objects |
NXOpen.DatumCollection | Represents a collection of datum geometry |
NXOpen.Diagramming.AnnotationCollection | Represents a collection of Annotation |
NXOpen.Diagramming.ConnectionCollection | Represents a collection of connection |
NXOpen.Diagramming.GroupCollection | Represents a collection of group |
NXOpen.Diagramming.LeaderLineCollection | Represents a collection of leader line |
NXOpen.Diagramming.NodeCollection | Represents a collection of Node |
NXOpen.Diagramming.PortCollection | Represents a collection of Port |
NXOpen.Diagramming.ShapeCollection | Represents a collection of Shape |
NXOpen.Diagramming.SheetBordersAndZonesCollection | Represents a collection of NXOpen.Diagramming.SheetBordersAndZones objects |
NXOpen.Diagramming.SheetCollection | Represents a collection of Sheet |
NXOpen.Diagramming.Tables.TableCollection | Represents a collection of Table |
NXOpen.Diagramming.TitleBlockCollection | Represents a collection of Title Block |
NXOpen.Die.DieCollection | Represents a Die Engineering/Design feature builder |
NXOpen.Die.DieSimCollection | Represents a collection of Die Simulation - Press Models |
NXOpen.DirectionCollection | Represents a collection of NXOpen.Direction |
NXOpen.Display.CameraCollection | Represents a collection cameras |
NXOpen.Display.CgfxAttrCollection | Represents a collection NXOpen.Display.CgfxAttr objects |
NXOpen.Display.CgfxMattexCollection | Represents a collection NXOpen.Display.CgfxMattex objects |
NXOpen.Display.DecalCollection | Represents a collection decal material texture |
NXOpen.Display.DynamicSectionCollection | Represents a collection of dynamic section objects |
NXOpen.Display.GridCollection | Represents a collection of plane grid objects |
NXOpen.Display.ImageCollection | Represents a collection of image objects |
NXOpen.Display.ImageDataCollection | Represents a collection of NXOpen.Display.ImageData objects |
NXOpen.Display.PointCloudCollection | Represents a collection of point cloud objects |
NXOpen.Display.SelPrefCollection | Represents a collection SelPref |
NXOpen.Display.TrueShadingCollection | Represents a collection SHED objects |
NXOpen.Display.TrueStudioCollection | Represents a collection TrueStudio objects |
NXOpen.DraftPointDataCollection | This class contains the factory methods for creating a DraftPointData object |
NXOpen.Drawings.BordersAndZonesCollection | Represents a collection of NXOpen.Drawings.BordersAndZones objects |
NXOpen.Drawings.DraftingBodyCollection | Represents a collection of NXOpen.Drawings.DraftingBody s |
NXOpen.Drawings.DraftingCurveCollection | Represents a collection of NXOpen.Drawings.DraftingCurve s |
NXOpen.Drawings.DraftingDrawingSheetCollection | Represents a collection of NXOpen.Drawings.DraftingDrawingSheet s |
NXOpen.Drawings.DraftingPointCollection | Represents a collection of NXOpen.Drawings.DraftingPoint s |
NXOpen.Drawings.DraftingViewCollection | Represents a collection of NXOpen.Drawings.DraftingView s |
NXOpen.Drawings.DrawingRegionCollection | Represents a collection of drawing regions |
NXOpen.Drawings.DrawingSheetCollection | Represents a collection of drawing sheets |
NXOpen.Drawings.SectionLineCollection | Represents a collection of NXOpen.Drawings.SectionLine s |
NXOpen.Drawings.SheetDraftingViewCollection | Represents a collection of NXOpen.Drawings.DraftingView s |
NXOpen.Drawings.SheetSectionLineCollection | Represents a collection of NXOpen.Drawings.SectionLine s |
NXOpen.Drawings.ViewAlignmentCollection | Represents a collection of NXOpen.Drawings.ViewAlignment s |
NXOpen.Drawings.ViewBreakCollection | Represents a collection of NXOpen.Drawings.ViewBreak s |
NXOpen.EllipseCollection | Represents a collection of ellipses |
NXOpen.ExpressionCollection | Represents a collection of expressions |
NXOpen.ExpressionGroupCollection | Represents a collection of expressions groups |
NXOpen.Facet.FacetedBodyCollection | Represents a collection of faceted bodies in a part |
NXOpen.FacetCollectorCollection | This class contains the factory method for creating a facet collector |
NXOpen.Features.AutomotiveCollection | This class contains the factory method for creating automotive feature builder |
NXOpen.Features.BaseFeatureCollection | This class contains methods for creating builders for features that are owned by a NXOpen.BasePart that is not necessarily a NXOpen.Part |
NXOpen.Features.CustomAttributeCollection | This class contains the factory method for creating custom attribute object |
NXOpen.Features.CustomFeatureDataCollection | This class contains the factory method for creating custom feature data object |
NXOpen.Features.FeatureCollection | Represents a collection of features |
NXOpen.Features.GeodesicSketchCollection | Represents a collection of GeodesicSketch features |
NXOpen.Features.ShipCollection | This class contains the factory method for creating ship feature builder |
NXOpen.Features.ShipDesign.PenetrationRequestCollection | Represents a NXOpen.Mechatronics.FunctionObjectCollection |
NXOpen.Features.Subdivision.SubdivisionBodyCollection | Represents a collection of subdivision body feature tools |
NXOpen.Features.SynchronousCurveCollection | This class contains the factory method for creating ST curve builder |
NXOpen.Features.SynchronousEdgeCollection | This class contains the factory method for creating ship feature builder |
NXOpen.Features.ToolingCollection | This class contains the factory method for creating tooling feature builder |
NXOpen.Features.ToolingFeatureCollection | This class contains the factory method for creating tooling feature builder |
NXOpen.Features.VehicleDesignCollection | This class contains the factory method for creating vehicle design feature builder |
NXOpen.Fields.FieldCollection | Represents a collection of Fields |
NXOpen.Fields.FieldDomainCollection | Provides methods for manipulating the field domains |
NXOpen.GeometricAnalysis.AnalysisObjectCollection | Create a AnalysisObjectCollection |
NXOpen.GeometricUtilities.BlendStopshortBuilderCollection | This class contains the factory methods for creating an BlendStopshortBuilder |
NXOpen.GeometricUtilities.FacePlaneSelectionBuilderCollection | This class contains the factory methods for creating an FacePlaneSelectionBuilder |
NXOpen.GeometricUtilities.FaceSetDataCollection | This class contains the factory methods for creating an FaceSetData |
NXOpen.GeometricUtilities.FaceSetOffsetCollection | This class contains the factory methods for creating an face set offset |
NXOpen.GeometricUtilities.GeometryLocationDataCollection | This class contains the factory methods for creating GeometryLocationData |
NXOpen.GeometricUtilities.SpinePointDataCollection | This class contains the factory methods for creating a SpinePointData object |
NXOpen.HyperbolaCollection | Represents a collection of hyperbolas |
NXOpen.InfiniteLineCollection | Represents a collection of infinite lines |
NXOpen.Issue.IssueListCollection | Represents a NXOpen.Issue.IssueListCollection |
NXOpen.Layer.CategoryCollection | Represents a collection of layer categories |
NXOpen.Layout2d.ComponentCollection | Represents a collection of NXOpen.Layout2d.Component s |
NXOpen.Layout2d.ComponentDefinitionCollection | Represents a collection of NXOpen.Layout2d.ComponentDefinition objects |
NXOpen.Layout2d.LayoutDrawingSheetCollection | Represents a collection of NXOpen.Layout2d.LayoutDrawingSheet s |
NXOpen.Layout2d.LocalDefinitionFolderCollection | Represents a collection of NXOpen.Layout2d.LocalDefinitionFolder objects |
NXOpen.LayoutCollection | Represents a collection of layouts |
NXOpen.LightCollection | Represents a collection of NXOpen.Light s |
NXOpen.LineCollection | Represents a collection of lines |
NXOpen.LinkedPartManager | Represents the customization interface during linked mirror part creation and update |
NXOpen.Mechatronics.AccelerometerCollection | Represents a collection of Accelerometer |
NXOpen.Mechatronics.AdapterFormulaCollection | Represents a collection of Adapter Formula |
NXOpen.Mechatronics.AdapterSignalCollection | Represents a collection of Adapter Signal |
NXOpen.Mechatronics.AlignBodyCollection | Represents a collection of Align Body |
NXOpen.Mechatronics.AngularLimitJointCollection | Represents a collection of Angular Limit Joint |
NXOpen.Mechatronics.AngularSpringJointCollection | Represents a collection of Angular Spring Joint |
NXOpen.Mechatronics.BallJointCollection | Represents a collection of Ball Joint |
NXOpen.Mechatronics.BreakingConstraintCollection | Represents a collection of Breaking Constraint |
NXOpen.Mechatronics.CamCollection | Represents a collection of Cam |
NXOpen.Mechatronics.CamProfileCollection | Represents a collection of Cam Profile |
NXOpen.Mechatronics.ChangeMaterialCollection | Represents a collection of Change Material Constraint |
NXOpen.Mechatronics.CollisionBodyCollection | Represents a collection of Collision Bodies |
NXOpen.Mechatronics.CollisionMaterialCollection | Represents a collection of Collision Material |
NXOpen.Mechatronics.CollisionSensorCollection | Represents a collection of Collision Sensor |
NXOpen.Mechatronics.CurveOnCurveJointCollection | Represents a collection of CurveOnCurve Joint |
NXOpen.Mechatronics.CylindricalJointCollection | Represents a collection of Cylindrical Joint |
NXOpen.Mechatronics.DisplayChangerCollection | Represents a collection of Object Transformer |
NXOpen.Mechatronics.DistanceSensorCollection | Represents a collection of Distance Sensor |
NXOpen.Mechatronics.DynamicObjectTableCollection | Represents a collection of DynamicObjectTable |
NXOpen.Mechatronics.ElectricalPartCollection | Represents a NXOpen.Mechatronics.ElectricalPartCollection |
NXOpen.Mechatronics.ExpressionBlockCollection | Represents a collection of ExpressionBlockObject |
NXOpen.Mechatronics.ExpressionBlockFormulaCollection | Represents a collection of ExpressionBlock Formula |
NXOpen.Mechatronics.ExternalConnectionCollection | Represents a collection of External Connection |
NXOpen.Mechatronics.ExternalSignalConfigurationCollection | Represents a collection of ExternalSignalConfigurationObject |
NXOpen.Mechatronics.FixedJointCollection | Represents a collection of Fixed Joint |
NXOpen.Mechatronics.ForceTorqueControlCollection | Represents the ForceTorque collection for ForceTorque constraint |
NXOpen.Mechatronics.FunctionObjectCollection | Represents a NXOpen.Mechatronics.FunctionObjectCollection |
NXOpen.Mechatronics.GanttCollection | Represents a NXOpen.Mechatronics.GanttCollection |
NXOpen.Mechatronics.GanttLinkerCollection | Represents a NXOpen.Mechatronics.GanttCollection |
NXOpen.Mechatronics.GearCollection | Represents a collection of Gears |
NXOpen.Mechatronics.GenericSensorCollection | Represents a collection of Generic Sensor |
NXOpen.Mechatronics.GraphControlCollection | Represents a collection of Graph Control |
NXOpen.Mechatronics.HingeJointCollection | Represents a collection of Hinge Joint |
NXOpen.Mechatronics.HydraulicCylinderCollection | Represents a collection of Hydraulic Cylinder |
NXOpen.Mechatronics.HydraulicValveCollection | Represents a collection of Hydraulic Valve |
NXOpen.Mechatronics.InclinometerCollection | Represents a collection of Inclinometer |
NXOpen.Mechatronics.LimitSwitchCollection | Represents a collection of Limit Switch |
NXOpen.Mechatronics.LinearLimitJointCollection | Represents a collection of Linear Limit Joint |
NXOpen.Mechatronics.LinearSpringJointCollection | Represents a collection of Linear Spring Joint |
NXOpen.Mechatronics.LogicObjectCollection | Represents a NXOpen.Mechatronics.LogicObjectCollection |
NXOpen.Mechatronics.MATLABSignalConnectionCollection | Represents a collection of Signal Connection |
NXOpen.Mechatronics.MCDSignalServerConfigurationCollection | Represents a collection of MCDSignalServerConfigurationObject |
NXOpen.Mechatronics.MotionProfileCollection | Represents a collection of Motion Profile |
NXOpen.Mechatronics.ObjectSinkCollection | Represents a collection of Object Sink |
NXOpen.Mechatronics.ObjectSourceCollection | Represents a collection of Object Source |
NXOpen.Mechatronics.ObjectTransformerCollection | Represents a collection of Object Transformer |
NXOpen.Mechatronics.PathConstraintJointCollection | Represents a collection of Path Constraint Joint |
NXOpen.Mechatronics.PhysicsPreferenceCollection | Represents a collection of Physics Preference |
NXOpen.Mechatronics.PlanarJointCollection | Represents a collection of Planar Joint |
NXOpen.Mechatronics.PMNavFolderLocatorCollection | Represents a NXOpen.Mechatronics.PMNavFolderLocatorCollection |
NXOpen.Mechatronics.PMNavFolderObjectCollection | Represents a NXOpen.Mechatronics.PMNavFolderObjectCollection |
NXOpen.Mechatronics.PneumaticCylinderCollection | Represents a collection of Pneumatic Cylinder |
NXOpen.Mechatronics.PneumaticValveCollection | Represents a collection of Pneumatic Valve |
NXOpen.Mechatronics.PointOnCurveJointCollection | Represents a collection of PointOnCurve Joint |
NXOpen.Mechatronics.PositionControlCollection | Represents a collection of Position Control |
NXOpen.Mechatronics.PositionSensorCollection | Represents a collection of Position Sensor |
NXOpen.Mechatronics.PreventCollisionCollection | Represents a collection of Prevent Collision Constraint |
NXOpen.Mechatronics.ProxyObjectCollection | Represents a collection of Proxy Object |
NXOpen.Mechatronics.ProxyOverrideObjectCollection | Represents a collection of Proxy Override Object |
NXOpen.Mechatronics.RackPinionCollection | Represents a collection of RackPinion |
NXOpen.Mechatronics.ReadWriteDeviceCollection | Represents a collection of ReadWriteDevice |
NXOpen.Mechatronics.RelayCollection | Represents a collection of Relay |
NXOpen.Mechatronics.RequirementCollection | Represents a NXOpen.Mechatronics.RequirementCollection |
NXOpen.Mechatronics.RigidBodyCollection | Represents a collection of Rigid Body |
NXOpen.Mechatronics.RuntimeBehaviorCollection | Represents a collection of Runtime Behavior |
NXOpen.Mechatronics.RuntimeFormulaCollection | Represents a collection of RuntimeFormula |
NXOpen.Mechatronics.RuntimeNCCollection | Represents a collection of Runtime NC |
NXOpen.Mechatronics.ScrewJointCollection | Represents a collection of Screw Joint |
NXOpen.Mechatronics.SHMSignalConnectionCollection | Represents a collection of SHM Signal Connection |
NXOpen.Mechatronics.SignalAdapterCollection | Represents a collection of Signal Adapter |
NXOpen.Mechatronics.SignalCollection | Represents a collection of Signal |
NXOpen.Mechatronics.SignalConnectionCollection | Represents a collection of Signal Connection |
NXOpen.Mechatronics.SignalMappingConnectionCollection | Represents a collection of Signal Connection |
NXOpen.Mechatronics.SlidingJointCollection | Represents a collection of Sliding Joint |
NXOpen.Mechatronics.SpeedControlCollection | Represents a collection of Speed Constraint |
NXOpen.Mechatronics.SpringDamperCollection | Represents a collection of Spring Damper |
NXOpen.Mechatronics.SymbolTableCollection | Represents a collection of SymbolTable |
NXOpen.Mechatronics.TagFormCollection | Represents a collection of TagForm |
NXOpen.Mechatronics.TagTableCollection | Represents a collection of TagTable |
NXOpen.Mechatronics.ThreeJointCouplerCollection | Represents a collection of ThreeJointCouplers |
NXOpen.Mechatronics.TracerCollection | Represents a collection of Tracer |
NXOpen.Mechatronics.TransmitterEntryCollection | Represents a collection of Transmitter Entry |
NXOpen.Mechatronics.TransmitterExitCollection | Represents a collection of Transmitter Exit |
NXOpen.Mechatronics.TransportSurfaceCollection | Represents a collection of Transport Surface |
NXOpen.Mechatronics.VelocitySensorCollection | Represents a collection of Velocity Sensor |
NXOpen.Mechatronics.VirtualAxisCollection | Represents a collection of Virtual Axis |
NXOpen.ModelingViewCollection | Represents a collection of ModelingView s |
NXOpen.Motion.AnalyticalContactCollection | Represents a collection of Analytical Contact objects |
NXOpen.Motion.AnalyticalContactPropertyCollection | Represents a collection of Analytical Contact Property objects |
NXOpen.Motion.BaseSectionCollection | Represents a collection of BaseSections |
NXOpen.Motion.BeamForceCollection | Represents a collection of BeamForces |
NXOpen.Motion.BodyContactCollection | Represents a collection of 3D contact objects |
NXOpen.Motion.BushingCollection | Represents a collection of motion joints |
NXOpen.Motion.ControlInputCollection | Represents a collection of Control Input objects |
NXOpen.Motion.ControlOutputCollection | Represents a collection of Control Output objects |
NXOpen.Motion.ControlPortCollection | Represents a collection of Control Port objects |
NXOpen.Motion.CouplerCollection | Represents a collection of motion couplers |
NXOpen.Motion.CurveContactCollection | Represents a collection of 2D contact objects |
NXOpen.Motion.CurveOnCurveCollection | Represents a collection of curve on curve objects |
NXOpen.Motion.DamperCollection | Represents a collection of motion damper |
NXOpen.Motion.FlexBodyCollection | Represents a collection of flexible body objects |
NXOpen.Motion.GeneralCouplerCollection | Represents a collection of 2-3 joint coupler objects |
NXOpen.Motion.GraphManager | Represents a collection of Graph objects, only creation is supported |
NXOpen.Motion.JointCollection | Represents a collection of motion joints |
NXOpen.Motion.JointDriverCollection | Represents a collection of Driver objects |
NXOpen.Motion.LinkCollection | Represents a collection of motion joints |
NXOpen.Motion.LinkCouplerCollection | Represents a collection of LinkCoupler objects |
NXOpen.Motion.LinkDriverCollection | Represents a collection of LinkDriver objects |
NXOpen.Motion.LoadTransferCollection | Represents a collection of load transfer objects |
NXOpen.Motion.MarkerCollection | Represents a collection of Markers |
NXOpen.Motion.MechatronicsCollection | Represents a collection of Mechatronics |
NXOpen.Motion.MechatronicsPortCollection | Represents a collection of ports used as outputs by Mechatronics |
NXOpen.Motion.MotionSensorCollection | Represents a collection of sensor objects |
NXOpen.Motion.MotionSolutionCollection | Represents a collection of Driver objects |
NXOpen.Motion.PackagingCollection | Represents a collection of Packaging objects |
NXOpen.Motion.PlantInputCollection | Represents a collection of Plant Input objects |
NXOpen.Motion.PlantOutputCollection | Represents a collection of Plant Output objects |
NXOpen.Motion.PMDCMotorCollection | Represents a collection of motion pmdc motor |
NXOpen.Motion.PointOnCurveCollection | Represents a collection of point on curve objects |
NXOpen.Motion.PointOnSurfaceCollection | Represents a collection of Point on Surface objects |
NXOpen.Motion.PortVariableCollection | Represents a collection of ports used to expose results on Mechatronics port variables |
NXOpen.Motion.ResultMeasureCollection | Represents a collection of result measure objects |
NXOpen.Motion.RoadCollection | Represents a collection of Road objects |
NXOpen.Motion.ScalarForceCollection | Represents a Scalar Force Collection |
NXOpen.Motion.ScalarTorqueCollection | Represents a collection of motion scalar torque |
NXOpen.Motion.SegmentCollection | Represents a collection of Segment objects, only creation is supported |
NXOpen.Motion.SignalChartCollection | Represents a collection of motion Signal Chart |
NXOpen.Motion.SplineBeamCollection | Represents a collection of SplineBeams |
NXOpen.Motion.SplineBeamPropertyCollection | Represents a collection of SplineBeamProperty |
NXOpen.Motion.SpringCollection | Represents a collection of motion spring |
NXOpen.Motion.SubmechanismPositionerCollection | Represents a collection of Submechanmism Positioner objects |
NXOpen.Motion.TextBasedElementCollection | Represents a collection of Text Based Element objects |
NXOpen.Motion.TireCollection | Represents a collection of motion tire elements |
NXOpen.Motion.TirePropertyBasicCollection | Represents a collection of NXOpen.Motion.TirePropertyBasic elements |
NXOpen.Motion.TirePropertyCdCollection | Represents a collection of Motion CDTire Tire Property elements |
NXOpen.Motion.TirePropertyFtCollection | Represents a collection of Motion FTire Tire Property elements |
NXOpen.Motion.TirePropertyMotorcycleCollection | Represents a collection of Motion Motorcycle Tire Property elements |
NXOpen.Motion.TirePropertyNonInertialCollection | Represents a collection of Motion Non-inertial Tire Property elements |
NXOpen.Motion.TirePropertyTnoCollection | Represents a collection of Motion Tno Tire Property elements |
NXOpen.Motion.VectorForceCollection | Represents a collection of vector force objects |
NXOpen.Motion.VectorTorqueCollection | Represents a collection of vector torque objects |
NXOpen.NXMatrixCollection | Represents a collection of NX Matrixes |
NXOpen.OffsetCollection | Represents a collection of NXOpen.Offset |
NXOpen.Optimization.DesignStudyCollection | Represents a NXOpen.Optimization.DesignStudyCollection |
NXOpen.Optimization.OptimizationCollection | Represents a NXOpen.Optimization.OptimizationCollection |
NXOpen.ParabolaCollection | Represents a collection of Parabolas |
NXOpen.PartCollection | Represents the collection of all parts in a session |
NXOpen.PDM.AttributeGroupCollection | Represents a collection of attribute group objects |
NXOpen.PDM.AttributeGroupDescriptionCollection | Represents a collection of attribute group description objects |
NXOpen.PDM.DBEntityProxyCollection | Represents a collection of NXOpen.PDM.DBEntityProxy objects |
NXOpen.PDM.PartOperationImportObserver | This class is responsible for invoking registered callbacks at different stages in import operation |
NXOpen.PDM.SaveAsReviseObserver | This class is responsible for invoking registered callback when objects goes for SaveAs and Revise and after the process |
NXOpen.PhysicalMaterialCollection | Represents the collection of all NXOpen.PhysicalMaterial objects in this Part |
NXOpen.PID.FlowDirectionArrowCollection | Represents a collection of FlowDirectionArrow |
NXOpen.PlaneCollection | Represents a collection of NXOpen.Plane |
NXOpen.PointCollection | Represents a collection of smart NXOpen.Point |
NXOpen.PolylineCollection | Represents a collection of polylines |
NXOpen.Positioning.ConstraintCollection | a collection of constraints |
NXOpen.Positioning.DisplayedConstraintCollection | a collection of displayed constraints |
NXOpen.Routing.AnchorCollection | Represents a collection of NXOpen.Routing.Anchor objects |
NXOpen.Routing.ArcSegmentCollection | Represents a collection of NXOpen.Routing.ArcSegment objects |
NXOpen.Routing.BendCornerCollection | Represents a collection of NXOpen.Routing.BendCorner objects |
NXOpen.Routing.BuiltInPathCollection | Represents a collection of NXOpen.Routing.BuiltInPath objects |
NXOpen.Routing.ControlPointCollection | Represents a collection of NXOpen.Routing.ControlPoint objects |
NXOpen.Routing.CopeCornerCollection | Represents a collection of NXOpen.Routing.CopeCorner objects |
NXOpen.Routing.CornerCollection | Represents a collection of NXOpen.Routing.Corner objects |
NXOpen.Routing.CrossSectionCollection | Represents a collection of NXOpen.Routing.CrossSection objects |
NXOpen.Routing.DesignRuleCollection | Represents a collection of NXOpen.Routing.DesignRule objects |
NXOpen.Routing.DesignRuleViolationCollection | Represents a collection of NXOpen.Routing.DesignRuleViolation objects |
NXOpen.Routing.DesignRuleViolationLocationCollection | Represents a collection of NXOpen.Routing.DesignRuleViolationLocation objects |
NXOpen.Routing.DiscontinuityCornerCollection | Represents a collection of NXOpen.Routing.DiscontinuityCorner objects |
NXOpen.Routing.Electrical.CableConnectionCollection | Represents a collection of NXOpen.Routing.Electrical.CableConnection objects |
NXOpen.Routing.Electrical.CablewaysLayoutViewCollection | Represents a collection of NXOpen.Routing.Electrical.CablewaysLayoutView objects |
NXOpen.Routing.Electrical.ConnectionCollection | Represents a collection of NXOpen.Routing.Electrical.Connection objects |
NXOpen.Routing.Electrical.ConnectorDeviceCollection | Represents a collection of NXOpen.Routing.Electrical.ConnectorDevice (CD) objects |
NXOpen.Routing.Electrical.ElectricalDeviceRelationshipCollection | Represents a collection of NXOpen.Routing.Electrical.ElectricalDeviceRelationship objects |
NXOpen.Routing.Electrical.ElectricalFormatCollection | Represents a Routing NXOpen.Routing.Electrical.ElectricalFormatCollection object |
NXOpen.Routing.Electrical.ElectricalNavigatorFilterCollection | Represents a Routing NXOpen.Routing.Electrical.ElectricalNavigatorFilterCollection object |
NXOpen.Routing.Electrical.ElectricalStockDeviceCollection | Represents a collection of NXOpen.Routing.Electrical.ElectricalStockDevice (ESD) objects |
NXOpen.Routing.Electrical.HarnessDeviceCollection | Represents a collection of Routing.Electrical.HarnessDevice objects |
NXOpen.Routing.Electrical.JumperConnectionCollection | A collection of NXOpen.Routing.Electrical.JumperConnection objects |
NXOpen.Routing.Electrical.NonPathConnectionCollection | A collection of NXOpen.Routing.Electrical.NonPathConnection objects |
NXOpen.Routing.Electrical.PathConnectionCollection | A collection of NXOpen.Routing.Electrical.PathConnection objects |
NXOpen.Routing.Electrical.SystemDeviceCollection | Represents a collection of NXOpen.Routing.Electrical.SystemDevice objects |
NXOpen.Routing.FillerCollection | Represents a collection of NXOpen.Routing.Stock objects |
NXOpen.Routing.FittingOverstockCollection | Represents a collection of NXOpen.Routing.FittingOverstock objects |
NXOpen.Routing.FittingPortCollection | Represents a collection of NXOpen.Routing.FittingPort objects |
NXOpen.Routing.FixturePortCollection | Represents a collection of NXOpen.Routing.FixturePort objects |
NXOpen.Routing.FormboardFrameCollection | Represents a collection of NXOpen.Routing.FormboardFrame objects |
NXOpen.Routing.InterfaceTerminalRelationshipCollection | Represents a collection of NXOpen.Routing.InterfaceTerminalRelationshipShadow objects |
NXOpen.Routing.ISegmentCollection | Represents a collection of Routing.ISegment objects |
NXOpen.Routing.LineSegmentCollection | Represents a collection of NXOpen.Routing.LineSegment objects |
NXOpen.Routing.MiterCornerCollection | Represents a collection of NXOpen.Routing.MiterCorner objects |
NXOpen.Routing.MiteredBendCornerCollection | Represents a collection of NXOpen.Routing.MiteredBendCorner objects |
NXOpen.Routing.MultiPortCollection | Represents a collection of NXOpen.Routing.MultiPort objects |
NXOpen.Routing.OffsetPathCollection | The Routing OffsetPath object is a list of segments in a route |
NXOpen.Routing.OverstockApplicationCollection | Represents a collection of NXOpen.Routing.OverstockApplication objects |
NXOpen.Routing.PortCollection | Represents a collection of NXOpen.Routing.Port objects |
NXOpen.Routing.PortConnectionCollection | Represents a collection of NXOpen.Routing.PortConnection objects |
NXOpen.Routing.ProxyPortCollection | Represents a collection of NXOpen.Routing.ProxyPort objects |
NXOpen.Routing.RouteLogicalAssociationCollection | Collection class for RouteLogicalAssociation object |
NXOpen.Routing.RoutePartDescriptorCollection | Represents a collection of NXOpen.Routing.RoutePartDescriptor objects |
NXOpen.Routing.RoutingSystemCollection | Represents a collection of NXOpen.Routing.RoutingSystem objects |
NXOpen.Routing.RunCollection | Represents a collection of NXOpen.Routing.Run objects |
NXOpen.Routing.SBendCornerCollection | Represents a collection of NXOpen.Routing.SBendCorner objects |
NXOpen.Routing.SplineSegmentCollection | Represents a collection of NXOpen.Routing.SplineSegment objects |
NXOpen.Routing.StockCollection | Represents a collection of NXOpen.Routing.Stock objects |
NXOpen.Routing.StockDataCollection | Represents a collection of NXOpen.Routing.StockData objects |
NXOpen.Routing.StockOffsetPortCollection | Represents a collection of NXOpen.Routing.StockOffsetPort objects |
NXOpen.Routing.TerminalPortCollection | |
NXOpen.Routing.WireCollection | The Routing Wire object is a list of segments in a route and some stock |
NXOpen.ScalarCollection | Represents a collection of NXOpen.Scalar objects |
NXOpen.ScCollectorCollection | This class contains the factory methods for creating a sc collector |
NXOpen.SectionCollection | This class contains the factory methods for creating a section |
NXOpen.SIM.KinematicComponentCollection | Represents the SimKimComponent Collection |
NXOpen.SketchCollection | Represents a collection of sketches |
NXOpen.SketchEvaluatorCollection | Represents a collection of NXOpen.SketchEvaluator |
NXOpen.SplineCollection | Represents a collection of splines |
NXOpen.Tooling.AddReusableFeatureCollection | Represents a collection of AddReusableFeature |
NXOpen.Tooling.AddReusablePartCollection | Represents a collection of AddReusablePart |
NXOpen.Tooling.AssignPatchCollection | Represents a collection of AssignPatch builder |
NXOpen.Tooling.AutoDieCollection | Represents a collection of Die Design Draw Punch |
NXOpen.Tooling.BendInsertDesignCollection | Creates a NXOpen.Tooling.BendInsertDesignCollection |
NXOpen.Tooling.BendOperationCollection | Creates a NXOpen.Tooling.BendOperationBuilder |
NXOpen.Tooling.BlankGeneratorCollection | Creates a NXOpen.Tooling.BlankGeneratorBuilder |
NXOpen.Tooling.BlankLayoutCollection | Creates a NXOpen.Tooling.BlankLayoutBuilder |
NXOpen.Tooling.BlankNestingCollection | Creates a NXOpen.Tooling.BlankNestingBuilder |
NXOpen.Tooling.BomCollection | Represents a collection of Bom |
NXOpen.Tooling.BurringInsertCollection | Creates a NXOpen.Tooling.BurringInsertCollection |
NXOpen.Tooling.CalculateAreaCollection | Represents a collection of CalculateArea builder |
NXOpen.Tooling.ChannelAdjustCollection | Creates a ChannelAdjust Collection |
NXOpen.Tooling.ChannelFittingCollection | Creates a ChannelFitting Collection |
NXOpen.Tooling.ClearanceManagementCollection | Creates a NXOpen.Tooling.ClearanceManagementCollection |
NXOpen.Tooling.ConceptPositionCollection | Represents a collection of ConceptPosition |
NXOpen.Tooling.CoolingConnectCollection | Creates a CoolingConnect Collection |
NXOpen.Tooling.CoolingDefineChannelCollection | Creates a CoolingDefineChannel Collection |
NXOpen.Tooling.CoolingExtendCollection | Creates a CoolingExtend Collection |
NXOpen.Tooling.CoolingPatternCollection | Creates a CoolingPattern Collection |
NXOpen.Tooling.CornerDesignCollection | Creates a NXOpen.Tooling.CornerDesignCollection |
NXOpen.Tooling.CreateBoxCollection | Creates CreateBoxBuilder collection |
NXOpen.Tooling.DesignTrimToolCollection | Creates a DesignTrimToolCollection class |
NXOpen.Tooling.DieBaseCollection | Creates a NXOpen.Tooling.DieBaseCollection |
NXOpen.Tooling.DieDesignSettingCollection | Creates a NXOpen.Tooling.DieDesignSettingBuilder |
NXOpen.Tooling.DirectUnfoldCollection | Creates a NXOpen.Tooling.DirectUnfoldBuilder |
NXOpen.Tooling.EdgePatchCollection | Represents a collection of EdgePatch builder |
NXOpen.Tooling.EjectorPostProcessingCollection | Creates a EjectorPostProcessingCollection class |
NXOpen.Tooling.ElectrodeCopyCollection | Represents a collection of ElectrodeCopy builder |
NXOpen.Tooling.ElectrodeDesignCollection | Represents a collection of Electrode Design |
NXOpen.Tooling.EnlargeSurfaceCollection | Represents a collection of Enlarge Surface |
NXOpen.Tooling.EWMultiPositionCollection | Creates EWMultiPosition builder collection |
NXOpen.Tooling.FaceColorManagementCollection | Creates a NXOpen.Tooling.FaceColorManagementBuilder |
NXOpen.Tooling.FaceSplitCollection | Creates Face Split collection |
NXOpen.Tooling.FamilyMoldCollection | Creates a NXOpen.Tooling.FamilyMoldCollection |
NXOpen.Tooling.FastenerAssemConfigCollection | Represents a collection of FastenerAssy |
NXOpen.Tooling.FastenerAssyCollection | Represents a collection of FastenerAssy |
NXOpen.Tooling.FastenerAssyCustomizationCollection | Represents a collection of FastenerAssyCustomizationBuilder |
NXOpen.Tooling.FastenerRemoveNodeCollection | Represents a collection of FastenerRemoveNodeBuilder |
NXOpen.Tooling.ForceCalculationCollection | Creates a NXOpen.Tooling.ForceCalculationBuilder |
NXOpen.Tooling.FormingInsertCollection | Creates a NXOpen.Tooling.FormingInsertBuilder |
NXOpen.Tooling.HoleManufacturingNoteCollection | Creates a NXOpen.Tooling.HoleManufacturingNoteBuilder |
NXOpen.Tooling.HoleReportCollection | Creates a NXOpen.Tooling.HoleReportBuilder |
NXOpen.Tooling.InitProjCollection | Represents a collection of InitProj |
NXOpen.Tooling.InitProjectCollection | Represents a collection of InitProject builder |
NXOpen.Tooling.InsertAuxiliaryCollection | Creates a NXOpen.Tooling.InsertAuxiliaryBuilder |
NXOpen.Tooling.IntermediateStageCollection | Creates a NXOpen.Tooling.IntermediateStageBuilder |
NXOpen.Tooling.LayoutManagementCollection | Creates a NXOpen.Tooling.LayoutManagementBuilder |
NXOpen.Tooling.ManufacturingGeometryCollection | Represents a collection of Manufacturing Geometry builder |
NXOpen.Tooling.MoldCsysCollection | Creates a NXOpen.Tooling.MoldCsysCollection |
NXOpen.Tooling.MoldDesignCollection | Represents a collection of Mold Design |
NXOpen.Tooling.MoldInsertCollection | Creates a MoldInsertCollection class |
NXOpen.Tooling.MoldProcessCollection | Represents a collection of Mold Process |
NXOpen.Tooling.MotionSimulationCollection | Represents a collection of MotionSimulation |
NXOpen.Tooling.MWCopySheetsCollection | Represents a collection of MWCopySheets builder |
NXOpen.Tooling.MWDefineRegionsCollection | Represents a collection of MWDefineRegions builder |
NXOpen.Tooling.MWDefineSheetsCollection | Represents a collection of MWDefineSheets builder |
NXOpen.Tooling.MWDesignGuideLinesCollection | Represents a collection of MWDesignGuideLines builder |
NXOpen.Tooling.MWDesignPartingSurfaceCollection | Represents a collection of MWDesignPartingSurface builder |
NXOpen.Tooling.MWLayoutCollection | Creates Mold Wizard layout collection |
NXOpen.Tooling.MWPartingManagerCollection | Represents a collection of MWPartingManager builder |
NXOpen.Tooling.MWSearchRegionCollection | Represents a collection of MWSearchRegion builder |
NXOpen.Tooling.MWTraversePartingLinesCollection | Represents a collection of the MWTraversePartingLines builder |
NXOpen.Tooling.ObjectAttributeManagementCollection | Creates a NXOpen.Tooling.ObjectAttributeManagementBuilder |
NXOpen.Tooling.PiercingInsertCollection | Creates a NXOpen.Tooling.PiercingInsertBuilder |
NXOpen.Tooling.PocketCollection | Creates a NXOpen.Tooling.PocketBuilder |
NXOpen.Tooling.ProfileSplitCollection | Represents a collection of ProfileSplit builder |
NXOpen.Tooling.QuickQuotationCollection | Creates a NXOpen.Tooling.QuickQuotationBuilder |
NXOpen.Tooling.ReferenceBlendCollection | Creates reference blend collection |
NXOpen.Tooling.ReliefDesignCollection | Creates a NXOpen.Tooling.ReliefDesignBuilder |
NXOpen.Tooling.ReplaceSolidCollection | Creates ReplaceSolidBuilder collection |
NXOpen.Tooling.ReusablePocketCollection | Represents a collection of ReusablePocketBuilder |
NXOpen.Tooling.RunnerCollection | Represents a collection of Runner |
NXOpen.Tooling.ScrapDesignCollection | Represents a collection of ScrapDesign |
NXOpen.Tooling.SIZERCollection | Represents a collection of SIZER |
NXOpen.Tooling.SolidPatchCollection | Represents a collection of SolidPatch builder |
NXOpen.Tooling.SpecifyBaffleCollection | Represents a collection of Specify Baffle builder |
NXOpen.Tooling.SpecifyCircuitCollection | Represents a collection of Specify Circuit builder |
NXOpen.Tooling.SplitSolidCollection | Creates SplitSolid builder collection |
NXOpen.Tooling.StandardPartCollection | Creates a StandardPartCollection class |
NXOpen.Tooling.StandardPartPositionCollection | Creates a StandardPartPositionCollection class |
NXOpen.Tooling.StockSizeCollection | Represents a collection of StockSize |
NXOpen.Tooling.StripLayoutCollection | Contains the create functions for builders |
NXOpen.Tooling.SubInsertCollection | Creates SubInsert builder collection |
NXOpen.Tooling.ToolingDrawingCollection | Creates a NXOpen.Tooling.CompDrawingBuilder |
NXOpen.Tooling.TraverseLoopCollection | Represents a collection of TraverseLoopbuilder |
NXOpen.Tooling.TrimMoldComponentsCollection | Creates a TrimMoldComponentsCollection class |
NXOpen.Tooling.TrimRegionCollection | Represents a collection of Trim Region |
NXOpen.Tooling.TrimSolidCollection | Represents a collection of Trim Solid |
NXOpen.Tooling.UndersizeCollection | Creates a undersize builder |
NXOpen.Tooling.UnusedFileManagementCollection | Creates a NXOpen.Tooling.UnusedFileManagementCollection |
NXOpen.Tooling.ValidCheckCollection | Represents a collection of ValidCheck |
NXOpen.Tooling.WireHoleCollection | Creates a NXOpen.Tooling.WireHoleBuilder |
NXOpen.Tooling.WorkflowManagementCollection | Creates a Workflow Management Collection |
NXOpen.Tooling.WorkpieceCollection | Creates a Workpiece Collection |
NXOpen.TracelineCollection | Represents a collection of tracelines |
NXOpen.UnitCollection | Provides methods for manipulating the units in a part |
NXOpen.UserDefinedTemplate.Collection | Represents a collection of user defined template |
NXOpen.Validate.RequirementCheckCollection | Represents an NX NXOpen.Validate.RequirementCheckCollection object |
NXOpen.Validate.RequirementCollection | Represents an NX NXOpen.Validate.RequirementCollection object |
NXOpen.ValidationCollection | Represents a collection of NXOpen.Validation |
NXOpen.ViewCollection | Represents a collection of NXOpen.View s |
NXOpen.VisualReporting.VisualReportCollection | A collection of visual reports |
NXOpen.Weld.CustomManager | Represents weld interface to customize the creation of welding joint features |
NXOpen.Weld.WeldManager | Manages weld features and assistant tools |
NXOpen.XformCollection | Represents a collection of NXOpen.Xform objects |
NXOpen.Mechatronics.OPCUAClientBuilder.TagInfo | Represents OPCUATag info definition structure |
NXOpen.Mechatronics.MATLABClientBuilder.TagInfo | Represents MATLABTag info definition structure |
NXOpen.Mechatronics.OPCClientBuilder.TagInfo | Represents OPCUATag info definition structure |
NXOpen.Mechatronics.PlcSimAdvClientBuilder.TagInfo | Represents PLCTag info definition structure |
NXOpen.Mechatronics.ProfinetClientBuilder.TagInfo | Represents Profinet signal definition structure |
NXOpen.UF.UFRoute.TagList | Wrapper for UF_ROUTE_tag_list_s |
NXOpen.UF.UFGdt.TargetCylArea | Wrapper for UF_GDT_target_cyl_area_s |
NXOpen.UF.UFGdt.TargetDiaArea | Wrapper for UF_GDT_target_dia_area_s |
NXOpen.UF.UFGdt.TargetNonPlanarData | Wrapper for UF_GDT_target_non_planar_data_s |
NXOpen.UF.UFGdt.TargetRectArea | Wrapper for UF_GDT_target_rect_area_s |
NXOpen.UF.UFGdt.TargetUdefArea | Wrapper for UF_GDT_target_udef_area_s |
NXOpen.CAE.Optimization.TBSIOptimizationTest | Represents an interface to perform optimization test |
NXOpen.CAE.Optimization.TBSShapeOptimizationSolution | Represents a shape optimization solution |
NXOpen.CAE.ModelCheck.ElementQualityCheckResults.TestSummary | Reprents the summary data of a specified quality checking test type |
NXOpen.UF.UFDrf.Text | Wrapper for UF_DRF_text_s |
NXOpen.CAE.Post.Text | Annotation text settings |
NXOpen.Annotations.TextCfw | Specifies color, font, and width for text |
NXOpen.UF.UFDrf.TextCfw | Wrapper for UF_DRF_text_cfw_s |
NXOpen.UF.UFDisp.TextureSpaceInfo | Wrapper for UF_DISP_texture_space_info_s |
NXOpen.UF.UFGdt.ThreadData | Wrapper for UF_GDT_thread_data_s |
NXOpen.UF.UFGdt.ThreadTolerance | Wrapper for UF_GDT_thread_tolerance_s |
NXOpen.UF.TimerValues | Wrapper for UF_timer_values_s |
NXOpen.UF.UFBound.Tolerance | Wrapper for UF_BOUND_tolerance_s |
NXOpen.UF.UFGdt.ToleranceValue | Wrapper for UF_GDT_tolerance_value_s |
NXOpen.UF.UFGdt.ToleranceZone | Wrapper for UF_GDT_tolerance_zone_s |
NXOpen.UF.UFPath.ToolChange | Wrapper for UF_PATH_tool_change_s |
NXOpen.UF.UFMotion.TraceStruct | Wrapper for UF_MOTION_trace_s |
NXOpen.UF.UFPath.TrackingPointChange | Wrapper for UF_PATH_tracking_point_change_s |
NXOpen.UF.UFCutter.TrackingPointData | Wrapper for UF_CUTTER_tracking_point_data_s |
TransientObject | |
NXOpen.Annotations.AngularTolerance | Represents angular tolerance |
NXOpen.Annotations.AppendedText | Represents Appended text |
NXOpen.Annotations.ArcComponent | Represents a single arc in an annotation and can be queried for information about that arc |
NXOpen.Annotations.ArrowComponent | Represents a single arrow in an annotation and can be queried for information about that arrow |
NXOpen.Annotations.AssociatedObject | Represents the objects to which the PMI applies |
NXOpen.Annotations.AssociativeText | Associative text class creates text associated to object and part attributes as well as object properties such as a drawing sheet name |
NXOpen.Annotations.Associativity | Represents an associativity object |
NXOpen.Annotations.ChamferDimensionPreferences | Represents chamfer dimension preferences |
NXOpen.Annotations.ComponentData | A ComponentData object can be used to query the components of an annotation |
NXOpen.Annotations.CustomSymbolData | Represents custom symbol data |
NXOpen.Annotations.CustomSymbolTextData | Represents custom symbol text data |
NXOpen.Annotations.DatumData | Represents datum data |
NXOpen.Annotations.DatumReference | Represents a datum reference |
NXOpen.Annotations.DatumTargetData | Represents datum target data |
NXOpen.Annotations.ArbitraryTargetData | Represents arbitrary datum target data |
NXOpen.Annotations.CircularTargetData | Represents circular datum target data |
NXOpen.Annotations.RectangularTargetData | Represents rectangular datum target data |
NXOpen.Annotations.DiameterRadiusPreferences | Represents diameter and radius preferences |
NXOpen.Annotations.DimensionData | Represents dimension data |
NXOpen.Annotations.DimensionPreferences | Represents dimension preferences |
NXOpen.Annotations.FcfData | Represents FCF data |
NXOpen.Annotations.FcfFrame | Represents an FCF frame |
NXOpen.Annotations.FcfFrameData | Represents FCF frames data |
NXOpen.Annotations.FrameBarPreferences | Represents frame bar preferences |
NXOpen.Annotations.LabelData | Represents label data |
NXOpen.Annotations.LeaderBundle | Represents the data for all the leaders of an annotation |
NXOpen.Annotations.LetteringPreferences | Represents lettering preferences |
NXOpen.Annotations.LineAndArrowPreferences | Represents line and arrow preferences |
NXOpen.Annotations.LinearTolerance | Represents linear tolerance |
NXOpen.Annotations.LineComponent | Represents a single line in an annotation and can be queried for information about that line |
NXOpen.Annotations.LineWeldData | Represents line weld data |
NXOpen.Annotations.LineWeldSideData | Represents line weld side data |
NXOpen.Annotations.MasterCustomSymbolData | Represents master custom symbol data |
NXOpen.Annotations.NarrowDimensionPreferences | Represents narrow dimension preferences |
NXOpen.Annotations.NoteData | Represents note data |
NXOpen.Annotations.OrdinateDimensionPreferences | Represents ordinate dimension preferences |
NXOpen.Annotations.PmiData | Represents PMI(Product and Manufacturing Information) data |
NXOpen.Annotations.PmiPreferences | Represents line and arrow preferences |
NXOpen.Annotations.SimpleDraftingAidPreferences | Represents simple drafting aid preferences |
NXOpen.Annotations.SymbolPreferences | Represents symbol preferences |
NXOpen.Annotations.TextComponent | Represents a single text in an annotation and can be queried for information about that text |
NXOpen.Annotations.TitleBlockPreferences | Represents title_block preferences |
NXOpen.Annotations.UnitsFormatPreferences | Represents units and format preferences |
NXOpen.Annotations.UserSymbolPreferences | Represents preferences related to user-defined symbols |
NXOpen.Assemblies.WaveQuery | Provides information about the inter-part relations (e.g |
NXOpen.AttributeIterator | This class is used to iterate over the user attributes of an object, with options to restrict or extend such searches |
NXOpen.BlockStyler.BlockDialog | Represents a Dialog |
NXOpen.BlockStyler.SnapBlockDialog | Represents a Snap Dialog |
NXOpen.BlockStyler.PropertyList | Represents a list of properties |
NXOpen.BlockStyler.TreeListMenu | Represents a menu class utilized by BlockStyler.Tree |
NXOpen.CAE.AfuAbscissaHeaderInfo | Represents the data to define abscissa header information for an afu record |
NXOpen.CAE.AfuData | the data used to create an AFU Data Record |
NXOpen.CAE.AfuHeaderId | the data used to create header id information for an AFU Data Record |
NXOpen.CAE.AfuMathFastRMSInfo | Represents the Fast RMS parameter information |
NXOpen.CAE.AfuMathFastRMSOutput | Represents the Fast RMS output information |
NXOpen.CAE.AfuOrdinateHeaderInfo | Represents the ordinate header information for an afu record |
NXOpen.CAE.AfuZHeaderInfo | Represents the Z axis header information for an afu record |
NXOpen.CAE.BeamElementInfo | Represents a Beam Element Information |
NXOpen.CAE.BeamElementInfoHandler | Represents a Beam Element Information Hanlder |
NXOpen.CAE.BeamSectionOffsetOptions | |
NXOpen.CAE.BeamSectionOptions | Represents the synchronize options to be used when a FEM part is created These options will be used to synchronize the specified entities from the master CAD part file to the FEM part file |
NXOpen.CAE.BeamSectionOrientationOptions | |
NXOpen.CAE.CAESet | Represents a group of CAE object sets |
NXOpen.CAE.FEElementLabelMap | Represents a Elementl Label to an CAE.FEElement map, it can be used to quickly convert a CAE.FEElement label, which is generally used in solver input files and results files, in the element object itself CAE.FEElement |
NXOpen.CAE.FemCreationOptions | Represents the FEM creation options to be used when a FEM part is created |
NXOpen.CAE.FemSynchronizeOptions | Represents the synchronize options to be used when a FEM part is created These options will be used to synchronize the specified entities from the master CAD part file to the FEM part file |
NXOpen.CAE.FENodeLabelMap | Represents a Nodel Label to an CAE.FENode map, it can be used to quickly convert a CAE.FENode label, which is generally used in solver input files and results files, in the node object itself CAE.FENode |
NXOpen.CAE.GRMSearch | Contains methods for searching Teamcenter for CAE objects, as well as a cache of already found items |
NXOpen.CAE.MaterialOptions | Represents the material options to be used when assigning a material to cae part |
NXOpen.CAE.MeshCollectorDisplayDefaults | Represents the base MeshCollectorDisplayDefaults class for Mesh, MeshCollector and MeshCollectorOccurrence classes |
NXOpen.CAE.MeshCollectorDisplayDefaults0d | Represents 0d Mesh Display Settings |
NXOpen.CAE.MeshCollectorDisplayDefaults1d | Represents 1d Mesh Display Settings |
NXOpen.CAE.MeshCollectorDisplayDefaults2d | Represents 2d Mesh Display Settings |
NXOpen.CAE.MeshCollectorDisplayDefaults3d | Represents 3d Mesh Display Settings |
NXOpen.CAE.MeshDisplaySettings | Represents the base MeshDisplaySettings class for Mesh class |
NXOpen.CAE.MeshDisplaySettings0d | Represents 0d Mesh Display Settings |
NXOpen.CAE.MeshDisplaySettings1d | Represents 1d Mesh Display Settings |
NXOpen.CAE.MeshDisplaySettings2d | Represents 2d Mesh Display Settings |
NXOpen.CAE.MeshDisplaySettings3d | Represents 3d Mesh Display Settings |
NXOpen.CAE.ModelCheck.ElementQualityCheckResults | Represents the element quality checking result of NXOpen.CAE.ModelCheck.ElementQualityCheckBuilder |
NXOpen.CAE.ModelCheck.ElementTestResult | Represents quality checking result for an element |
NXOpen.CAE.ModelCheck.TestResult | Represents quality checking result of a quality test |
NXOpen.CAE.PostAnnotation | Controls appearance of a annoation object in a postview |
NXOpen.CAE.PostAnnotationBuilder | Builder to create NXOpen.CAE.PostAnnotation from NXOpen.CAE.Post |
NXOpen.CAE.PostScenarioDefinition | Represents a data source data definition |
NXOpen.CAE.PostScenarioParameters | The class represents the NXOpen.CAE.PostScenarioParameters used to instanciate a NXOpen.CAE.PostScenarioBuilder |
NXOpen.CAE.PostScenarioVariant | A dynamically typed scalar value |
NXOpen.CAE.PostSelectionEntity | This class has the information related to post selection entity |
NXOpen.CAE.PostShowhideBuilder | Represents NXOpen.CAE.PostShowhideBuilder |
NXOpen.CAE.ResultMeasureModelSubset | Represents a a subset of the model upon which to calculate results |
NXOpen.CAE.ResultMeasureModelSubsetFE | Represents a FE-based subset of the model upon which to calculate results |
NXOpen.CAE.ResultMeasureModelSubsetGeom | Represents a geometry-based subset of the model upon which to calculate results |
NXOpen.CAE.ResultMeasureResultOptions | Represents the basic result options for result measure |
NXOpen.CAE.ResultMeasureResultAllOptions | Represents the combination of all result options for result measure |
NXOpen.CAE.ResultMeasureResultDirectionOptions | Represents the result directional options for result measure |
NXOpen.CAE.ResultMeasureResultDirectionSectionOptions | Represents the result directional and beam/shell section options for result measure |
NXOpen.CAE.ResultMeasureResultSectionOptions | Represents the result with beam/shell section options for result measure |
NXOpen.CAE.SimLoadRecipeLbcGenerator | Handles generation of subcases and loads based on a NXOpen.CAE.SimLoadRecipe |
NXOpen.CAE.Xyplot.BasePlotParameters | Represents the parameters passed to create or modify a plot |
NXOpen.CAE.Xyplot.OverlayParameters | Represents the parameters passed to overlay plot records on an existing plot graph |
NXOpen.CAE.Xyplot.PlotParameters | Represents the parameters passed to create a plot |
NXOpen.CAM.GougeCheckResults | Represents the gouge results data |
NXOpen.CAM.PathContactMotion | This class represents the data of a Linear Motion |
NXOpen.CAM.PathEvent | Represets a Cam Tool Path Event |
NXOpen.CAM.PathLaserDepositionData | Definition for Laser deposition data |
NXOpen.CAM.PathLaserGeometryData | Definition for Laser geometry data |
NXOpen.CAM.PathLaserMachineData | Definition for Laser machine data |
NXOpen.CAM.PathLaserOptimizationData | Definition for Laser optimization data |
NXOpen.CAM.PathLaserPowderData | Definition for Laser powder data |
NXOpen.CAM.PathLaserProcessorData | Definition for Laser processor data |
NXOpen.CAM.PathLevelMarker | This class represents the data of a Linear Motion |
NXOpen.CAM.PathLinearMotion | This class represents the data of a Linear Motion |
NXOpen.CAM.PathCircularMotion | This class represents the data of a Linear Motion |
NXOpen.CAM.PathHelixMotion | This class represents the data of a Linear Motion |
NXOpen.CustomPopupMenuHandler | Represents Custom Popup Menu Handler class |
NXOpen.CustomPopupMenuItem | Represents Custom Popup Menu Item class |
NXOpen.CustomPopupMenu | Represents Custom Popup Menu Item class |
NXOpen.DatumConstraint | Represents a constraint that specifies the location of a NXOpen.Features.DatumFeature |
NXOpen.Die.PressModel | Represents a Die Simulation - Press Model |
NXOpen.Display.TransientText | Represents temporary text strings which can be used for Temporary Display |
NXOpen.DisplayModification | Represents changes to the display characteristics of an object |
NXOpen.Drafting.DrawingAutomationWizard | Represents callback data for the drawing automation wizard |
NXOpen.Drawings.DraftingCurveInfo | Represents Drafting Curve Info |
NXOpen.Drawings.FlatPatternObject | Provides an interface to the data available for flat pattern objects on drawing views |
NXOpen.ErrorInfo | Contains information about an error that occurred |
NXOpen.ErrorList | Represents a list of errors |
NXOpen.FacetSelectionRule | Represents a NXOpen.FacetSelectionRule facet collection rules |
NXOpen.BodyFacetsRule | Represents a NXOpen.FacetSelectionRule that collects all facets from a Face Body |
NXOpen.BrushFacetsRule | Represents a NXOpen.FacetSelectionRule that collects facets with brush tool intent |
NXOpen.BunchFacetsOnFaceRule | Represents a NXOpen.FacetSelectionRule that collects all facets from a face or a NX faceted body |
NXOpen.ColorRegionRule | Represents a NXOpen.FacetSelectionRule that chains to collect all connected facets of same color |
NXOpen.FaceFacetsRule | Represents a NXOpen.FacetSelectionRule that collects all facets from a face or NX facet body |
NXOpen.FillBoundaryRule | Represents a NXOpen.FacetSelectionRule that collects flood filled facets without doing any check of facet's existence in current collection |
NXOpen.FineBrushFacetsRule | Represents a NXOpen.FacetSelectionRule that collects facets with fine brush tool intent |
NXOpen.FloodFillFacetsRule | Represents a NXOpen.FloodFillFacetsRule that collects flood filled facets |
NXOpen.RoughBrushFacetsRule | Represents a NXOpen.FacetSelectionRule that collects facets with rough brush tool intent |
NXOpen.SingleFacetRule | Represents a NXOpen.FacetSelectionRule that collects facets without any intent i |
NXOpen.FeatureProcessBuilderStatus | |
NXOpen.Features.ConstructionFeatureData | Represents the data of a construction feature |
NXOpen.Features.CustomAttribute | Represents a Features.CustomAttribute class |
NXOpen.Features.CustomDoubleArrayAttribute | Represents a Features.CustomDoubleArrayAttribute class |
NXOpen.Features.CustomDoubleAttribute | Represents a Features.CustomDoubleAttribute class |
NXOpen.Features.CustomExpressionArrayAttribute | Represents a Features.CustomExpressionArrayAttribute class |
NXOpen.Features.CustomExpressionAttribute | Represents a Features.CustomExpressionAttribute class |
NXOpen.Features.CustomIntegerArrayAttribute | Represents a Features.CustomIntegerArrayAttribute class |
NXOpen.Features.CustomIntegerAttribute | Represents a Features.CustomIntegerAttribute class |
NXOpen.Features.CustomLogicalArrayAttribute | Represents a Features.CustomLogicalArrayAttribute class |
NXOpen.Features.CustomLogicalAttribute | Represents a Features.CustomLogicalAttribute class |
NXOpen.Features.CustomStringArrayAttribute | Represents a Features.CustomStringArrayAttribute class |
NXOpen.Features.CustomStringAttribute | Represents a Features.CustomStringAttribute class |
NXOpen.Features.CustomTagArrayAttribute | Represents a Features.CustomTagArrayAttribute class |
NXOpen.Features.CustomTagAttribute | Represents a Features.CustomAttribute class |
NXOpen.Features.CustomFeatureClass | Provides interfaces to configure callbacks for a custom feature |
NXOpen.Features.CustomFeatureData | Represents the collection of attributes for a custom feature |
NXOpen.Features.CustomFeatureSelectionFilter | Represents a Features.CustomFeatureSelectionFilter class |
NXOpen.Features.OutputFeatureData | Represents the data of a output feature |
NXOpen.Features.RPODimension | Represents a RPO Dimension |
NXOpen.Features.ShipDesign.ShipPreparationInfo | Used to interrogate and change the processing within the NXOpen.Features.ShipDesign.ShipPreparationBuilder |
NXOpen.Features.SketchConversionReport | Represents a collection of status of conversion of features to independent sketch |
NXOpen.Features.SketchConversionStatus | Represents the status of conversion of features to independent sketch |
NXOpen.Features.TrackingData | Represents tracking information for outputs created by custom feature |
NXOpen.Features.UserDefinedFeatureClass | JA interface for UserDefinedFeatureClass |
NXOpen.Fields.ExportData | Represents data for field export |
NXOpen.Fields.ImportData | Represents data transfer objectst for field import |
NXOpen.Formboard.UpdateDiscrepancy | Defines a discrepancy object which contains information about a specific difference between the formboard drawing and the 3D harness model |
NXOpen.GeneralScalarTable | Represents a General M x N table of scalar (real) values |
NXOpen.ScalarMatrixValue | Represents a General M x N matrix of scalar (real) values |
NXOpen.ScalarTableValue | Represents a General M x N table of scalar (real) values |
NXOpen.GenericMeasure | Represents a single valued measurement |
NXOpen.MeasureBodies | Represents the measurement specific mass properties for a set of bodies |
NXOpen.MeasureFaces | Represents the measurement of perimeter and area of a set of faces |
NXOpen.MeasurePoint | Represents a point measurement |
NXOpen.MeasureRectangularExtreme | Represents a rectangular extreme point measurement |
NXOpen.SingleMeasure | Represents a single valued measurement |
NXOpen.MeasureAngle | Represents a single valued Angle measurement |
NXOpen.MeasureDistance | Represents a single valued distance measurement |
NXOpen.MeasureLength | Represents a single valued length measurement |
NXOpen.MeasurePolarAngle | Represents a single valued polar angle measurement |
NXOpen.MeasurePolarArea | Represents a single valued polar area measurement |
NXOpen.MeasurePolarRadius | Represents a single valued polar radius measurement |
NXOpen.GeometricAnalysis.CurveAnalysisRecord | Represents the information regarding how to display a curve's poles, knots, combs, peaks and inflections |
NXOpen.HumanData | Represent the data used to create the human |
NXOpen.HumanHandShapeData | Represent hand shape data |
NXOpen.Layer.StateCollection | Represents a copy of the layer states |
NXOpen.LayoutDefinition | Represents the definition of a layout |
NXOpen.Mechatronics.ComparisonResultBase | Represents base object of comparison result |
NXOpen.Mechatronics.ComparisonResult | Represents comparison result |
NXOpen.Mechatronics.ComparisonResultAttribute | Represents attribute of comparison result |
NXOpen.Mechatronics.ComparisonResultContext | Represents context of comparison results |
NXOpen.Mechatronics.ComparisonResultElectricalPart | Represents electrical part of comparison result |
NXOpen.MenuBar.ContextMenu | Represents a Context Menu |
NXOpen.MenuBar.ContextMenuEntry | Represents an entry on a context menu |
NXOpen.MenuBar.ContextMenuProperties | Provides information about the MenuBar |
NXOpen.MenuBar.MenuButton | Implements the Object for Menu Buttons |
NXOpen.MenuBar.MenuButtonEvent | Implements the Event Object for Menu Buttons |
NXOpen.MeshParameterData | Represents surface rebuild data structure |
NXOpen.MeshProfileString | Represents Mesh profile string |
NXOpen.Mfg.AM.NestingStatus | Nesting Status |
NXOpen.Mfg.AM.Printer | Printer |
NXOpen.Mfg.AM.PrintJob | Print Job |
NXOpen.MWUpdate | Update tools used in Mold Wizard for the Journamation layer |
NXOpen.OpenXml.DocumentData | Represents the definition of the base document data |
NXOpen.OpenXml.DocumentDataGroup | Contains methods for adding document data for CAE Report |
NXOpen.OpenXml.ImageDocumentData | Represents the image to be exported to the speific Open XML file |
NXOpen.OpenXml.ImageGroupDocumentData | Represents the group of images to be exported to the speific Open XML file |
NXOpen.OpenXml.TableCellData | Represents the table cell to be exported to the speific Open XML file |
NXOpen.OpenXml.TableDocumentData | Represents the table to be exported to the speific Open XML file |
NXOpen.OpenXml.TextDocumentData | Represents the text to be exported to the speific Open XML file |
NXOpen.Options.ChangeList | Records changes to option values at the specified level |
NXOpen.Options.DraftingStandardChangeList | Records changes to option values at the specified level |
NXOpen.PartCleanup | Provides utilities to to eliminate certain inaccessible objects from the part file |
NXOpen.PartCloseResponses | Manages a list of part name/response pairs which are used to determine whether a part should be closed if modified during part close |
NXOpen.PartCloseStatus | This class represents a list of part names with associated status codes that serve to communicate why these parts were not able to be closed |
NXOpen.PartDelayedUpdateStatus | Represents a list of part names with associated delay status codes |
NXOpen.PartFamily.InstanceDefinition | This class repesents a part family table record (or instance definition on the template) and is created/deleted by PartFamily.TemplateManager |
NXOpen.PartFamily.MemberIdentifier | This class represents the unique identifier for a part family member |
NXOpen.PartFamily.TemplateManager | This class serves as the manager for all the part family related operations |
NXOpen.PartFamilyManager | This class represents part family |
NXOpen.PartFamilyMemberData | This class is responsible for storing part family member data Use the method NXOpen.Part.NewPartFamilyMemberData to create new instance of this class |
NXOpen.PartFamilyMemberValues | This class is responsible for storing part family member attribute values |
NXOpen.PartLoadStatus | Represents a list of part names with associated status codes |
NXOpen.PartReopenReport | Contains information about a part and its components after it has been reopened |
NXOpen.PartReopenStatus | Contains information about a part after an attempt was made to reopen it |
NXOpen.PartSaveStatus | This class represents a list of part names with associated status codes that serve to communicate why these parts where not able to be saved during part save |
NXOpen.PDM.AlternateIdManager | This class is responsible for setting and getting NX Manager database attribute |
NXOpen.PDM.CaeCloneManager | This class is used for executing CAE Clone on a Simulation File or a FeModel File |
NXOpen.PDM.CAEFileContainer | This class is a File Container class for uploading JT files created by NX CAE Post Processing to Teamcenter |
NXOpen.PDM.CustomWebAppMenuHandler | Represents Custom WebApp Menu Handler class |
NXOpen.PDM.DatabaseAttributeManager | This class is responsible for setting and getting NX Manager database attribute |
NXOpen.PDM.DatabaseObject | Represents a Teamcenter database object |
NXOpen.PDM.DatabaseObjectManager | This class is used for retrieving PDM database objects |
NXOpen.PDM.DatabaseObjects | Represents a collection of NXOpen.PDM.DatabaseObject |
NXOpen.PDM.ErrorMessageHandler | Represents the class that contains ErrorObjects and Failed Logical Objects |
NXOpen.PDM.FileManagement | This class is responsible for Teamcenter file management related activities |
NXOpen.PDM.FindCriteria | Represents find criteria objects |
NXOpen.PDM.ListOfValues | Represents list of values to be used in search query |
NXOpen.PDM.NonMasterData | Represents a class that performs various operations on NonMaster Datasets |
NXOpen.PDM.OperationErrors | Represents Operation Errors to be returned in TCIN related operations |
NXOpen.PDM.PartBuilder | This class serves as the base class for NX Manager part builders |
NXOpen.PDM.PartFromPartBuilder | This class provides the methods necessary to create a new part in NX Manager from an existing part |
NXOpen.PDM.PartFromTemplateBuilder | This class provides the methods necessary to create a new part in NX Manager from a template part |
NXOpen.PDM.PdmFile | Contains methods for accessing PDM file data |
NXOpen.PDM.PdmSearch | Represents search query |
NXOpen.PDM.PendingComponentsManager | This class is used for managing a part's pending components, that is, those that have been added within Teamcenter but are not yet present in NX |
NXOpen.PDM.PersistentSettings | Persistently held settings for a Teamcenter user account |
NXOpen.PDM.SearchResult | Represents search query |
NXOpen.PDM.SessionSettings | Values for the settings that affect the current Teamcenter session |
NXOpen.PDM.SmartSaveContext | Represents smart save context |
NXOpen.PDM.SoaQuery | Represents search soa query to perform Teamcenter search |
NXOpen.PDM.TracelinkQuery | Represents the Trace link query |
NXOpen.PropertyContainer | Represents a list of properties |
NXOpen.DataContainer | Represents a list of data |
NXOpen.CAE.CaeDataContainer | Represents a list of named properties, where the property name is a unique string |
NXOpen.Report.CommandImporter | Represents a command importer to import the commands into command libary |
NXOpen.Report.ResultXmlFileWriter | Contains methods for adding document data and generating result XML file for CAE Report |
NXOpen.Routing.CharacteristicList | Contains a list of characteristics |
NXOpen.Routing.HealPath | Represents a NXOpen.Routing.HealPath object which holds the data used in the creation of the heal path spline |
NXOpen.Routing.RunItem | Routing Run Item object references components which comprise a piping run |
NXOpen.SectionData | Represents section data |
NXOpen.SectionElementData | Represents section element data |
NXOpen.SelectionHandle | Represents a SelectionHandle for UI Styler |
NXOpen.SelectionIntentRule | Represents a NXOpen.SelectionIntentRule which essentially provides capabilities to collect curves, edges, faces and bodies |
NXOpen.ApparentChainingRule | Represents a NXOpen.SelectionIntentRule that collects curves which appear connected or tangent connected in a particular drafting view |
NXOpen.BodyDumbRule | Represents a NXOpen.SelectionIntentRule that collects bodies without any intent i |
NXOpen.BodyFeatureRule | Represents a NXOpen.SelectionIntentRule that collects all bodies created or modified by a feature |
NXOpen.BodyGroupRule | Represents a NXOpen.SelectionIntentRule that collects all bodies of a group |
NXOpen.CurveChainRule | Represents a NXOpen.SelectionIntentRule that collects end-to-end connected curves from the seed curve |
NXOpen.CurveDumbRule | Represents a NXOpen.SelectionIntentRule that collects curves without any intent i |
NXOpen.CurveFeatureChainRule | Represents a NXOpen.SelectionIntentRule that collects end-to-end connected curves from the feature of the seed |
NXOpen.CurveFeatureRule | Represents a NXOpen.SelectionIntentRule that collects all curves created by a feature |
NXOpen.CurveFeatureTangentRule | Represents a NXOpen.SelectionIntentRule that collects tangent connected curves from the feature of the seed |
NXOpen.CurveGroupRule | Represents a NXOpen.SelectionIntentRule that collects all curves of a group |
NXOpen.CurveTangentRule | Represents a NXOpen.SelectionIntentRule that collects tangent connected curves from the seed curve |
NXOpen.EdgeBodyRule | Represents a NXOpen.SelectionIntentRule that collects all the edges of a body |
NXOpen.EdgeBoundaryRule | Represents a NXOpen.SelectionIntentRule that collects all the edges of a face |
NXOpen.EdgeChainRule | Represents a NXOpen.SelectionIntentRule that collects end-to-end connected edges from the body of the seed edge |
NXOpen.EdgeDumbRule | Represents a NXOpen.SelectionIntentRule that collects edges without any intent i |
NXOpen.EdgeFaceRule | Represents a NXOpen.SelectionIntentRule that collects all edges of a face |
NXOpen.EdgeFeatureRule | Represents a NXOpen.SelectionIntentRule that collects all edges created or modified by a feature |
NXOpen.EdgeIntersectRule | Represents a NXOpen.SelectionIntentRule that collects all intersection edges between a set of faces |
NXOpen.EdgeMultipleSeedTangentRule | Represents a NXOpen.SelectionIntentRule that collects tangent connected edges from the body of the seed edge |
NXOpen.EdgeSheetBoundaryRule | Represents a NXOpen.SelectionIntentRule that collects boundary edges of a sheet body |
NXOpen.EdgeTangentRule | Represents a NXOpen.SelectionIntentRule that collects tangent connected edges from the body of the seed edge |
NXOpen.EdgeVertexRule | Represents a NXOpen.SelectionIntentRule that collects the vertex edge and and its adjacent edges |
NXOpen.EdgeVertexTangentRule | Represents a NXOpen.SelectionIntentRule that collects the vertex edge and the edges adjacent and tangent to it |
NXOpen.FaceAdjacentRule | Represents a NXOpen.SelectionIntentRule that collects the faces adjacent to the seed face of a body |
NXOpen.FaceAllBlendRule | Represents a NXOpen.SelectionIntentRule that collects all blend faces |
NXOpen.FaceAndAdjacentFacesRule | Represents a NXOpen.SelectionIntentRule that collects both the seed face and all its adjacent faces |
NXOpen.FaceBodyRule | Represents a NXOpen.SelectionIntentRule that collects all the faces of a body |
NXOpen.FaceBossPocketFacesRule | Represents a NXOpen.SelectionIntentRule that collects all faces of a boss or pocket |
NXOpen.FaceConnectedBlendRule | Represents a NXOpen.SelectionIntentRule that collects all connected blend faces |
NXOpen.FaceDumbRule | Represents a NXOpen.SelectionIntentRule that collects faces without any intent i |
NXOpen.FaceFeatureRule | Represents a NXOpen.SelectionIntentRule that collects all faces created or modified by a feature |
NXOpen.FaceMergedRibFacesRule | Represents a NXOpen.SelectionIntentRule that collects all merged rib faces |
NXOpen.FaceRegionBoundaryRule | Represents a NXOpen.SelectionIntentRule that collects a region of faces that are tangent connected |
NXOpen.FaceRegionRule | Represents a NXOpen.SelectionIntentRule that collects a region of faces |
NXOpen.FaceRibFacesRule | Represents a NXOpen.SelectionIntentRule that collects all rib faces |
NXOpen.FaceSlotFacesRule | Represents a NXOpen.SelectionIntentRule that collects all faces of a pocket |
NXOpen.FaceTangentRule | Represents a NXOpen.SelectionIntentRule that collects tangent connected faces from the body of the seed face |
NXOpen.FeatureIntersectionEdgesRule | Represents a NXOpen.SelectionIntentRule that collects the intersection edges of boolean like features |
NXOpen.FeaturePointsRule | Represents a NXOpen.SelectionIntentRule that collects all points created by a feature |
NXOpen.FollowFilletRule | Represents a NXOpen.SelectionIntentRule that collects curves/edges which are connected or tangent connected and follow onto and off an untrimmed fillet |
NXOpen.OuterEdgesOfFacesRule | Represents a NXOpen.SelectionIntentRule that collects the outer edges of a group of faces |
NXOpen.RegionBoundaryRule | Represents a NXOpen.SelectionIntentRule that collects curves as specified by an enclosed region |
NXOpen.RibTopFaceEdgesRule | Represents a NXOpen.SelectionIntentRule that collects the like convexity outer edges of a group of faces |
NXOpen.SelectionMethod | Represents the output from a smart selector method |
NXOpen.CAE.AdjacentFaceMethod | Represents the output from the adjacent face smart selector method |
NXOpen.CAE.CircularEdgeMethod | Represents the output from the circular edge smart selector method |
NXOpen.CAE.CylinderFaceMethod | Represents the output from the cylinder face smart selector method |
NXOpen.CAE.EdgePathMethod | Represents a NXOpen.CAE.EdgePathMethod |
NXOpen.CAE.ElemEdgePathMethod | Represents a NXOpen.CAE.ElemEdgePathMethod |
NXOpen.CAE.ElemLabelMethod | Represents the output from the elem label smart selector method |
NXOpen.CAE.FeatureEdgeNodeMethod | Represents the output from the feature edge node smart selector method |
NXOpen.CAE.FeatureElemEdgeMethod | Represents the output from the feature element edge smart selector method |
NXOpen.CAE.FeatureElemFaceMethod | Represents the output from the feature element face smart selector method |
NXOpen.CAE.FeatureElemMethod | Represents the output from the feature element smart selector method |
NXOpen.CAE.FeatureNodeMethod | Represents the output from the feature node smart selector method |
NXOpen.CAE.FeatureShellElemMethod | Represents the output from the feature shell element smart selector method |
NXOpen.CAE.FilletFaceMethod | Represents the output from the fillet face smart selector method |
NXOpen.CAE.GroupEdgeMethod | Represents the output from the Group Edge smart selector method |
NXOpen.CAE.GroupElemEdgeMethod | Represents the output from the Group Element Edge smart selector method |
NXOpen.CAE.GroupElemFaceMethod | Represents the output from the Group Element Face smart selector method |
NXOpen.CAE.GroupElemMethod | Represents the output from the Group Element smart selector method |
NXOpen.CAE.GroupFaceMethod | Represents the output from the Group Face smart selector method |
NXOpen.CAE.GroupMethod | Represents the output from the Group smart selector method |
NXOpen.CAE.GroupNodeMethod | Represents the output from the Group Node smart selector method |
NXOpen.CAE.HoleElementEdgeMethod | Represents the output from the hole element edge smart selector method |
NXOpen.CAE.NodeLabelMethod | Represents the output from the node label smart selector method |
NXOpen.CAE.OrderedEdgeElemMethod | Represents the output from the ordered edge element smart selector method |
NXOpen.CAE.OrderedEdgeNodeMethod | Represents the output from the ordered edge node smart selector method |
NXOpen.CAE.OrderedFeatureEdgeElemMethod | Represents the output from the ordered feature edge element smart selector method |
NXOpen.CAE.OrderedFeatureEdgeNodeMethod | Represents the output from the ordered feature edge node smart selector method |
NXOpen.CAE.RelatedCurveMethod | Represents the output from the related curve smart selector method |
NXOpen.CAE.RelatedEdgeMethod | Represents the output from the related edge smart selector method |
NXOpen.CAE.RelatedElemEdgeMethod | Represents the output from the related element edge smart selector method |
NXOpen.CAE.RelatedElemFaceMethod | Represents the output from the related element face smart selector method |
NXOpen.CAE.RelatedElemMethod | Represents the output from the related element smart selector method |
NXOpen.CAE.RelatedFaceMethod | Represents the output from the related face smart selector method |
NXOpen.CAE.RelatedNodeMethod | Represents the output from the related node smart selector method |
NXOpen.CAE.RelatedVertexMethod | Represents the output from the related vertex smart selector method |
NXOpen.CAE.ShowAdjacentGroupMethod | Represents the output from the Show Hide Group smart selector method |
NXOpen.CAE.ShowHideGroupMethod | Represents the output from the Show Hide Group smart selector method |
NXOpen.CAE.SliverFaceMethod | Represents the output from the sliver face smart selector method |
NXOpen.CAE.TangentContinuousEdgeMethod | Represents the output from the circular edge smart selector method |
NXOpen.CAE.TangentFaceMethod | Represents the output from the tangent face smart selector method |
NXOpen.SelectionSubscriber | Defines a SelectionSubscriber for managing selection events |
NXOpen.Spreadsheet | Represents a class for internal spreadsheet |
NXOpen.SpreadsheetCellData | Represents a class for Spreadsheet cell data |
NXOpen.SpreadsheetExternal | Represents a class for external spreadsheet |
NXOpen.SurfaceRebuildData | Represents surface rebuild data structure |
NXOpen.Tooling.CloneObject | Represents the clone operation in Add Reusable Component Builder |
NXOpen.Tooling.ClonePart | Represents the part inforamtion to be cloned in Add Reusable Component Builder |
NXOpen.Tooling.CoolingFittingData | Represents the cooling fitting data in Add Channel Fitting Builder |
NXOpen.Tooling.EjectorTableData | Represents the ejector table data in Ejector Table Builder |
NXOpen.Tooling.ReusableObject | Represents a NXOpen.Tooling.ReusableObject |
NXOpen.Tooling.SpreadsheetData | Represents the spreadsheet data which could be standalone spreadsheet file with special format or be the spreadsheet data from part family template part, the latter format will not have any other data except the name and value in class NXOpen.Tooling.SpreadsheetDataParameter , that means it might not return any result in some methods such as "GetDefinedAttributesExpressions" |
NXOpen.Tooling.SpreadsheetDataParameter | Represents parameter in the spreadsheet |
NXOpen.Tooling.StandardPartData | Represents the standard part client data |
NXOpen.UIStyler.Attachment | Represents an Attachment for UI Styler |
NXOpen.UIStyler.Dialog | Represents a DialogItem for UI Styler |
NXOpen.UIStyler.FileOperationData | Represents a FileOperationData for UI Styler |
NXOpen.UIStyler.PageSwitchData | Represents a PageSwitchData for UI Styler |
NXOpen.UIStyler.StylerEvent | Represents a StylerEvent |
NXOpen.UIStyler.StylerItem | Represents a Styler Item |
NXOpen.UIStyler.BitMap | Represents a Bit Map for UI Styler |
NXOpen.UIStyler.ButtonLayout | Represents a Button Layout for UI Styler |
NXOpen.UIStyler.CollapsibleGroup | Represents a Collapsible Group for UI Styler |
NXOpen.UIStyler.ColorTool | Represents a ColorTool for UI Styler |
NXOpen.UIStyler.DialogItem | Represents a DialogItem for UI Styler |
NXOpen.UIStyler.GroupBox | Represents a GroupBox for UI Styler |
NXOpen.UIStyler.IntegerItem | Represents a Integer for UI Styler |
NXOpen.UIStyler.IntegerScale | Represents a IntegerScale for UI Styler |
NXOpen.UIStyler.LabelItem | Represents a Label for UI Styler |
NXOpen.UIStyler.MultiSelectList | Represents a MultiSelectList for UI Styler |
NXOpen.UIStyler.MultiTextBox | Represents a MultiTextBox for UI Styler |
NXOpen.UIStyler.OptionMenu | Represents a OptionMenu for UI Styler |
NXOpen.UIStyler.OptionToggle | Represents a OptionToggle for UI Styler |
NXOpen.UIStyler.PropertyPage | Represents a PropertyPage for UI Styler |
NXOpen.UIStyler.PushButton | Represents a PushButton for UI Styler |
NXOpen.UIStyler.RadioBox | Represents a RadioBox for UI Styler |
NXOpen.UIStyler.RealItem | Represents a Real for UI Styler |
NXOpen.UIStyler.RealScale | Represents a RealScale for UI Styler |
NXOpen.UIStyler.RowColumn | Represents a RowColumn for UI Styler |
NXOpen.UIStyler.ScrolledWindow | Represents a ScrolledWindow for UI Styler |
NXOpen.UIStyler.SelectionBox | Represents a SelectionBox for UI Styler |
NXOpen.UIStyler.Separator | Represents a Separator for UI Styler |
NXOpen.UIStyler.SingleSelectList | Represents a SingleSelectList for UI Styler |
NXOpen.UIStyler.StringItem | Represents a StringItem for UI Styler |
NXOpen.UIStyler.TabControl | Represents a Tab Control for UI Styler |
NXOpen.UIStyler.Toggle | Represents a Toggle for UI Styler |
NXOpen.UIStyler.ToolPalette | Represents a ToolPalette for UI Styler |
NXOpen.UIStyler.WideString | Represents a WideString for UI Styler |
NXOpen.UserDefinedObjects.UserDefinedClass | JA interface for the UserDefinedClass object |
NXOpen.UserDefinedObjects.UserDefinedEvent | Implements the Event Object for UDO's |
NXOpen.UserDefinedObjects.UserDefinedDisplayEvent | Implements the Display Event Object for UDO's |
NXOpen.UserDefinedObjects.UserDefinedLinkEvent | Implements the Display Event Object for UDO's |
NXOpen.UserDefinedObjects.UserDefinedObjectDisplayContext | This class is used to display User Defined Objects |
NXOpen.Validate.CheckerNode | Represents a checker that validator will use to check against part node |
NXOpen.Validate.PartNode | Represents a part file that validator will check against |
NXOpen.Weld.ConnectedPart | Represents weld connected part to customize the retrieval of connected part information |
NXOpen.BasePart.TransientStatus | Transient part return data |
NXOpen.UF.UFPlist.TraversalSettings | Wrapper for UF_PLIST_traversal_settings_s |
NXOpen.UF.UFCurve.TrimMult | Wrapper for UF_CURVE_trim_mult_s |
NXOpen.UF.UFModl.TrimObject | Wrapper for UF_MODL_trim_object |
NXOpen.Preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref | Represents the various surface display parameters |
NXOpen.UF.UFCutter.TurnTrackingPointData | Wrapper for UF_CUTTER_turn_tracking_point_data_s |
NXOpen.CAE.Result.Type | Result type structure to specify a result dataset |
NXOpen.UF.UFModl.UdfExpData | Wrapper for UF_MODL_udf_exp_data_s |
NXOpen.UF.UFModl.UdfsDefData | Wrapper for UF_MODL_udfs_def_data_s |
NXOpen.UF.UFModl.UdfsExp | Wrapper for UF_MODL_udfs_exp_s |
NXOpen.UF.UFDrf.UdsSize | Wrapper for UF_DRF_uds_size_s |
NXOpen.UF.UFDrf.UdSymbolFontInfo | Wrapper for UF_DRF_ud_symbol_font_info_s |
NXOpen.UF.UFPlot.UghpglCmpOptions | Wrapper for UF_PLOT_ughpgl_cmp_options_s |
NXOpen.UF.UgmgrAttrInfo | Wrapper for UF_UGMGR_ATTR_info_s |
NXOpen.UF.UFSf.Ugs2dMeshParms | Wrapper for UF_SF_ugs_2d_mesh_parms_s |
NXOpen.UF.UFSf.UgsMeshAbstractionParams | Wrapper for UF_SF_ugs_mesh_abstraction_params_s |
NXOpen.UF.UFSf.UgsTetMeshParms | Wrapper for UF_SF_ugs_tet_mesh_parms_s |
NXOpen.Session.UndoMarkData | This structure contains data about an undo mark |
NXOpen.UF.UFPs.Unexported | Wrapper for UF_PS_unexported_s |
NXOpen.UF.UFGdt.UnitBasis | Wrapper for UF_GDT_unit_basis_s |
NXOpen.UF.UFDrf.UnitsFormatPreferences | Wrapper for UF_DRF_units_format_preferences_s |
NXOpen.LineDesigner.FactoryCadGeoEquipmentBuilder.UpdatedControlData | Contains feature update status report |
NXOpen.LineDesigner.FactoryCadGeoEquipmentAssemblyBuilder.UpdatedControlData | Contains feature update status report |
NXOpen.UF.UFAssem.UpgradeStatus | Wrapper for UF_ASSEM_upgrade_status_s |
NXOpen.UF.UFUgmgr.ValidateDatasetName | Wrapper for UF_UGMGR_validate_dataset_name_s |
NXOpen.UF.UFClone.ValidationOpts | Wrapper for UF_CLONE_validation_opts_s |
NXOpen.Annotations.Value | Specifies the value data |
NXOpen.UF.UFUgmgr.VariantConfiguration | Wrapper for UF_UGMGR_variant_configuration_s |
NXOpen.UF.UFView.VdeData | Wrapper for UF_VIEW_vde_data_s |
NXOpen.UF.UFView.VdeDataAndType | Wrapper for UF_VIEW_vde_data_and_type_s |
NXOpen.Vector3d | Represents a three-dimensional vector |
NXOpen.UF.UFScop.VectorData | Wrapper for UF_SCOP_vector_data_s |
NXOpen.UF.UFMotion.VectorForceTorque | Wrapper for UF_MOTION_vector_force_torque_s |
NXOpen.CAE.Result.VelocityParameters | Velociy parameter structure to specify result state for the velocity field used in streamline extraction |
NXOpen.UF.UFDraw.ViewBoundary | Wrapper for UF_DRAW_view_boundary_s |
NXOpen.UF.UFDraw.ViewInfo | Wrapper for UF_DRAW_view_info_s |
NXOpen.UF.UFDraw.ViewLabelParms | Wrapper for UF_DRAW_view_label_parms_s |
NXOpen.UF.UFDraw.ViewPrfs | Wrapper for UF_DRAW_view_prfs_s |
NXOpen.UF.UFView.Visualization | Wrapper for UF_VIEW_visualization_s |
NXOpen.UF.UFStd.VrmlParams | Wrapper for UF_STD_vrml_params_s |
NXOpen.UF.UFDrf.WeldSymbols | Wrapper for UF_DRF_weld_symbols_s |
NXOpen.UF.UFDrf.WeldSymInfo | Wrapper for UF_DRF_weld_sym_info_s |
NXOpen.UF.UFCgm.WidthColor | Wrapper for UF_CGM_width_color_s |
NXOpen.UF.UFCgm.WidthCustom | Wrapper for UF_CGM_width_custom_s |
NXOpen.Preferences.PartVisualizationEmphasis.WireframeBlendOptions | Specifies options that control the color-blending effect used to de-emphasize wireframe geometry |
NXOpen.UF.UFModl.WrapAssem | Wrapper for UF_MODL_wrap_assem_s |
NXOpen.UF.UFCurve.WrapData | Wrapper for UF_CURVE_wrap_data_s |
NXOpen.UF.UFModl.WrapGeom | Wrapper for UF_MODL_wrap_geom_s |
NXOpen.UF.XUdoViewInfo | Wrapper for UFX_UDO_view_info_s |
NXOpen.Routing.BendReportManager.XyzReport | Used in the XYZ bend reports |
NXOpen.Routing.BendReportManager.YbcReport | Used in the YBC bend reports |