NXOpen .NET Reference
12.0.0
|
Represents a streamline cut step builder More...
Properties | |
unsafe NXOpen.CAM.DPMItpBuilder.StepMethodOption | CutStepType [get, set] |
Returns or sets the cut step type which defines different cut steps including tolerances and points number More... | |
unsafe int | FirstCut [get, set] |
Returns or sets the first cut which defines point number for the first cut More... | |
unsafe int | SecondCut [get, set] |
Returns or sets the second cut which defines point number for the second cut More... | |
unsafe NXOpen.CAM.InheritableDoubleBuilder | StepIntol [get] |
Returns the step Intol which defines the inner tolerance More... | |
unsafe NXOpen.CAM.InheritableDoubleBuilder | StepOutol [get] |
Returns the step Outol which defines the outer tolerance More... | |
unsafe int | ThirdCut [get, set] |
Returns or sets the third cut which defines point number for the third cut and is available when cut pattern is follow More... | |
Represents a streamline cut step builder
This object is a sub-object and cannot be instantiated.
Created in NX10.0.1
|
getset |
Returns or sets the cut step type which defines different cut steps including tolerances and points number
Created in NX10.0.1
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the first cut which defines point number for the first cut
Created in NX10.0.1
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
getset |
Returns or sets the second cut which defines point number for the second cut
Created in NX10.0.1
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")
|
get |
Returns the step Intol which defines the inner tolerance
Created in NX10.0.1
License requirements: None.
|
get |
Returns the step Outol which defines the outer tolerance
Created in NX10.0.1
License requirements: None.
|
getset |
Returns or sets the third cut which defines point number for the third cut and is available when cut pattern is follow
Created in NX10.0.1
License requirements to get this property: None.
License requirements to set this property: cam_base ("CAM BASE")