NXOpen .NET Reference
12.0.0
|
Represents the ncgroup collection More...
Public Types | |
enum | UseDefaultName { False, True } |
Whether use the default name in creation More... | |
Protected Member Functions | |
override int | EnumerateMoveNext (ref Tag currentTag, byte[] state) |
Advances the enumerator to the next element of the collection. More... | |
Properties | |
Tag | Tag [get] |
Returns the tag of this object. More... | |
Represents the ncgroup collection
To obtain an instance of this class, refer to NXOpen.CAM.CAMSetup
Created in NX4.0.0
unsafe NXOpen.CAM.BarrelToolBuilder NXOpen.CAM.NCGroupCollection.CreateBarrelToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a barrel builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | barrel group to be edited |
unsafe NXOpen.CAM.DrillBackCountersinkTool NXOpen.CAM.NCGroupCollection.CreateDrillBackCountersinkTool | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill back countersink tool builder
Created in NX10.0.3
License requirements: cam_base ("CAM BASE")
param | drill back countersink tool group to be edited |
unsafe NXOpen.CAM.DrillBackSpotfacingToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillBackSpotfacingToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill back spotfacing tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill back spotfacing tool group to be edited |
unsafe NXOpen.CAM.DrillBoreToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillBoreToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill bore tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill bore tool group to be edited |
unsafe NXOpen.CAM.DrillBoringBarTool NXOpen.CAM.NCGroupCollection.CreateDrillBoringBarTool | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill boring bar tool builder
Created in NX11.0.1
License requirements: cam_base ("CAM BASE")
param | drill boring bar tool group to be edited |
unsafe NXOpen.CAM.DrillBurnishingToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillBurnishingToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill burnishing tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill burnishing tool group to be edited |
unsafe NXOpen.CAM.DrillCenterBellToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillCenterBellToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill center bell tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill center bell tool group to be edited |
unsafe NXOpen.CAM.DrillChamferBoringBarTool NXOpen.CAM.NCGroupCollection.CreateDrillChamferBoringBarTool | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill chamfer boring bar tool builder
Created in NX11.0.1
License requirements: cam_base ("CAM BASE")
param | drill chamfer boring bar tool group to be edited |
unsafe NXOpen.CAM.DrillCoreToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillCoreToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill core tool builder
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
param | drill core tool group to be edited |
unsafe NXOpen.CAM.DrillCounterboreToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillCounterboreToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill counterbore tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill counterbore tool group to be edited |
unsafe NXOpen.CAM.DrillCtskToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillCtskToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill ctsk tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill ctsk tool group to be edited |
unsafe NXOpen.CAM.DrillGeomBuilder NXOpen.CAM.NCGroupCollection.CreateDrillGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.DrillMethodBuilder NXOpen.CAM.NCGroupCollection.CreateDrillMethodBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill method builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill method group to be edited |
unsafe NXOpen.CAM.DrillReamerToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillReamerToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill reamer tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill reamer tool group to be edited |
unsafe NXOpen.CAM.DrillSpotdrillToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillSpotdrillToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill spotdrill tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill spotdrill tool group to be edited |
unsafe NXOpen.CAM.DrillSpotfaceToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillSpotfaceToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill spotface tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill spotface tool group to be edited |
unsafe NXOpen.CAM.DrillStdToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillStdToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill std tool group to be edited |
unsafe NXOpen.CAM.DrillStepToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillStepToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill step tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill step tool group to be edited |
unsafe NXOpen.CAM.DrillTapToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillTapToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill tap tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill tap tool group to be edited |
unsafe NXOpen.CAM.DrillThreadMillToolBuilder NXOpen.CAM.NCGroupCollection.CreateDrillThreadMillToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a drill thread mill tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | drill thread mill tool group to be edited |
unsafe NXOpen.CAM.FeatureBasedGeomBuilder NXOpen.CAM.NCGroupCollection.CreateFeatureBasedGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a manufacturing feature based geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.FeatureGroupBuilder NXOpen.CAM.NCGroupCollection.CreateFeatureGroupBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a feature group geometry builder
Created in NX9.0.3
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.FormToolBuilder NXOpen.CAM.NCGroupCollection.CreateFormToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a form builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | form group to be edited |
unsafe NXOpen.CAM.GenericToolBuilder NXOpen.CAM.NCGroupCollection.CreateGenericToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a generic solid tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | generic tool group to be edited |
unsafe NXOpen.CAM.NCGroup NXOpen.CAM.NCGroupCollection.CreateGeometry | ( | NXOpen.CAM.NCGroup | parentGroup, |
string | typeName, | ||
string | subtypeName, | ||
NXOpen.CAM.NCGroupCollection.UseDefaultName | useDefaultName, | ||
string | newGeometryName | ||
) |
Create a geometry group of the specified type and subtype under the parent group.
If the value of use_default_name is true, default name will be used for the created geometry group; otherwise, the specified name will be used.
Created in NX4.0.0
License requirements: cam_base ("CAM BASE")
parentGroup | the parent group |
typeName | the name of the template type |
subtypeName | the name of the template subtype |
useDefaultName | use the default name or not |
newGeometryName | the name of the created geometry group, only used when use_default_name == true |
unsafe NXOpen.CAM.NCGroup NXOpen.CAM.NCGroupCollection.CreateGeometry | ( | NXOpen.CAM.NCGroup | parentGroup, |
NXOpen.CAM.CAMFeature[] | features, | ||
string | typeName, | ||
string | subtypeName, | ||
NXOpen.CAM.NCGroupCollection.UseDefaultName | useDefaultName, | ||
string | newGeometryName | ||
) |
Create geometry groups of the specified type and subtype under the parent group for the specified manufacturing features.
If the value of use_default_name is true, default name will be used for the created geometry group; otherwise, the specified name will be used.
Created in NX7.5.0
License requirements: cam_base ("CAM BASE")
parentGroup | the parent group |
features | the manufacturing features |
typeName | the name of the template type |
subtypeName | the name of the template subtype |
useDefaultName | use the default name or not |
newGeometryName | the name of the created geometry group, only used when use_default_name == true |
unsafe NXOpen.CAM.GrooveToolBuilder NXOpen.CAM.NCGroupCollection.CreateGrooveToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a groove builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | groove group to be edited |
unsafe NXOpen.CAM.GroupFeatures NXOpen.CAM.NCGroupCollection.CreateGroupFeatures | ( | ) |
Creates the group features
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
unsafe NXOpen.CAM.HoleBossGeometry NXOpen.CAM.NCGroupCollection.CreateHoleBossGeometryBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Create Hole or Boss Geometry builder
Created in NX7.5.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.LaserMethod NXOpen.CAM.NCGroupCollection.CreateLaserMethod | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a laser method
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
param | laser method group to be edited |
unsafe NXOpen.CAM.LaserTool NXOpen.CAM.NCGroupCollection.CreateLaserTool | ( | NXOpen.CAM.CAMObject | param | ) |
Create a laser tool
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
param | probe tool group to be edited |
unsafe NXOpen.CAM.MachineGroupBuilder NXOpen.CAM.NCGroupCollection.CreateMachineGroupBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a machine group builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MachineHeadGroupBuilder NXOpen.CAM.NCGroupCollection.CreateMachineHeadGroupBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a machine head group builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MachinePocketGroupBuilder NXOpen.CAM.NCGroupCollection.CreateMachinePocketGroupBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a machine pocket group builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MachineTurretGroupBuilder NXOpen.CAM.NCGroupCollection.CreateMachineTurretGroupBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a machine turret group builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.NCGroup NXOpen.CAM.NCGroupCollection.CreateMethod | ( | NXOpen.CAM.NCGroup | parentGroup, |
string | typeName, | ||
string | subtypeName, | ||
NXOpen.CAM.NCGroupCollection.UseDefaultName | useDefaultName, | ||
string | newMethodName | ||
) |
Create a method group of the specified type and subtype under the parent group.
If the value of use_default_name is true, default name will be used for the created method group; otherwise, the specified name will be used.
Created in NX4.0.0
License requirements: cam_base ("CAM BASE")
parentGroup | the parent group |
typeName | the name of the template type |
subtypeName | the name of the template subtype |
useDefaultName | use the default name or not |
newMethodName | the name of the created method group, only used when use_default_name == true |
unsafe NXOpen.CAM.MillAreaGeomBuilder NXOpen.CAM.NCGroupCollection.CreateMillAreaGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a mill area geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MillBoundaryGeomBuilder NXOpen.CAM.NCGroupCollection.CreateMillBoundaryGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a mill boundary geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MillFormToolBuilder NXOpen.CAM.NCGroupCollection.CreateMillFormToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a mill form builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | mill form group to be edited |
unsafe NXOpen.CAM.MillGeomBuilder NXOpen.CAM.NCGroupCollection.CreateMillGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a mill geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MillMethodBuilder NXOpen.CAM.NCGroupCollection.CreateMillMethodBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a mill method builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | mill method group to be edited |
unsafe NXOpen.CAM.MillOrientGeomBuilder NXOpen.CAM.NCGroupCollection.CreateMillOrientGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a mill orient geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MillTextGeomBuilder NXOpen.CAM.NCGroupCollection.CreateMillTextGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a mill text geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MillToolBuilder NXOpen.CAM.NCGroupCollection.CreateMillToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a mill tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | mill tool group to be edited |
unsafe NXOpen.CAM.MillVolumeGeomBuilder NXOpen.CAM.NCGroupCollection.CreateMillVolumeGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a mill volume geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MultiBladeGeomBuilder NXOpen.CAM.NCGroupCollection.CreateMultiBladeGeometryBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a blade geometry builder
Created in NX7.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.MultiToolBuilder NXOpen.CAM.NCGroupCollection.CreateMultiToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a multi tool builder
Created in NX11.0.1
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.NcmPlanarBuilder NXOpen.CAM.NCGroupCollection.CreateNcmPlanarBuilder | ( | ) |
Creates a builder for Non-Cutting Moves for Planar Milling
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
unsafe NXOpen.CAM.NcmScBuilder NXOpen.CAM.NCGroupCollection.CreateNcmScBuilder | ( | ) |
Creates a builder for Non-Cutting Moves for Surface Contouring
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
unsafe NXOpen.CAM.OptimizeTraverseGroupBuilder NXOpen.CAM.NCGroupCollection.CreateOptimizeTraverseGroupBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a optimize traverse group builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.ProbeToolBuilder NXOpen.CAM.NCGroupCollection.CreateProbeToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a probe tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | probe tool group to be edited |
unsafe NXOpen.CAM.NCGroup NXOpen.CAM.NCGroupCollection.CreateProgram | ( | NXOpen.CAM.NCGroup | parentGroup, |
string | typeName, | ||
string | subtypeName, | ||
NXOpen.CAM.NCGroupCollection.UseDefaultName | useDefaultName, | ||
string | newProgramName | ||
) |
Create a program group of the specified type and subtype under the parent group.
If the value of use_default_name is true, default name will be used for the created program group; otherwise, the specified name will be used.
Created in NX4.0.0
License requirements: cam_base ("CAM BASE")
parentGroup | the parent group |
typeName | the name of the template type |
subtypeName | the name of the template subtype |
useDefaultName | use the default name or not |
newProgramName | the name of the created program group, only used when use_default_name == true. |
unsafe NXOpen.CAM.ProgramOrderGroupBuilder NXOpen.CAM.NCGroupCollection.CreateProgramOrderGroupBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a program order group builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.RotaryFinishGeomBuilder NXOpen.CAM.NCGroupCollection.CreateRotaryFinishGeometryBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a rotary finish geometry builder
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.ThreadToolBuilder NXOpen.CAM.NCGroupCollection.CreateThreadToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a thread builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | thread group to be edited |
unsafe NXOpen.CAM.NCGroup NXOpen.CAM.NCGroupCollection.CreateTool | ( | NXOpen.CAM.NCGroup | parentGroup, |
string | typeName, | ||
string | subtypeName, | ||
NXOpen.CAM.NCGroupCollection.UseDefaultName | useDefaultName, | ||
string | newToolName | ||
) |
Create a tool group of the specified type and subtype under the parent group.
If the value of use_default_name is true, default name will be used for the created tool group; otherwise, the specified name will be used.
Created in NX4.0.0
License requirements: cam_base ("CAM BASE")
parentGroup | the parent group |
typeName | the name of the template type |
subtypeName | the name of the template subtype |
useDefaultName | use the default name or not |
newToolName | the name of the created tool group, only used when use_default_name == true |
unsafe NXOpen.CAM.TToolBuilder NXOpen.CAM.NCGroupCollection.CreateTToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a t tool builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | t group to be edited |
unsafe NXOpen.CAM.TurnAvoidanceGeomBuilder NXOpen.CAM.NCGroupCollection.CreateTurnAvoidanceGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a turning avoidance geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.TurnBoundaryGeomBuilder NXOpen.CAM.NCGroupCollection.CreateTurnBoundaryGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a turning boundary geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.TurnFeatureGeomBuilder NXOpen.CAM.NCGroupCollection.CreateTurnFeatureGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a turning feature geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.TurnGeomBuilder NXOpen.CAM.NCGroupCollection.CreateTurnGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a turning geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.TurnMethodBuilder NXOpen.CAM.NCGroupCollection.CreateTurnMethodBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a turn method builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | turn method group to be edited |
unsafe NXOpen.CAM.TurnOrientGeomBuilder NXOpen.CAM.NCGroupCollection.CreateTurnOrientGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a turn orient geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.TurnToolBuilder NXOpen.CAM.NCGroupCollection.CreateTurnToolBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a turn builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | turn group to be edited |
unsafe NXOpen.CAM.WedmBasedGeomBuilder NXOpen.CAM.NCGroupCollection.CreateWedmBasedGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wire edm based geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmCornerControlBuilder NXOpen.CAM.NCGroupCollection.CreateWedmCornerControlBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wedm_corner_control builder
Created in NX6.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmCuttingBuilder NXOpen.CAM.NCGroupCollection.CreateWedmCuttingBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wedm_cutting builder
Created in NX6.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmExtGeomBuilder NXOpen.CAM.NCGroupCollection.CreateWedmExtGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wire edm external geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmFeatureGeomBuilder NXOpen.CAM.NCGroupCollection.CreateWedmFeatureGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wire edm feature geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmGeomBuilder NXOpen.CAM.NCGroupCollection.CreateWedmGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wire edm geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmIntGeomBuilder NXOpen.CAM.NCGroupCollection.CreateWedmIntGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wire edm internal geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmLeadInOutBuilder NXOpen.CAM.NCGroupCollection.CreateWedmLeadInOutBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wedm_lead_in_out builder
Created in NX6.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmMethodBuilder NXOpen.CAM.NCGroupCollection.CreateWedmMethodBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wedm method builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | wedm method group to be edited |
unsafe NXOpen.CAM.WedmMoveControlBuilder NXOpen.CAM.NCGroupCollection.CreateWedmMoveControlBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wedm_corner_control builder
Created in NX6.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmNocoreGeomBuilder NXOpen.CAM.NCGroupCollection.CreateWedmNocoreGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wire edm nocore geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmOpenGeomBuilder NXOpen.CAM.NCGroupCollection.CreateWedmOpenGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wire edm open geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WedmOrientGeomBuilder NXOpen.CAM.NCGroupCollection.CreateWedmOrientGeomBuilder | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wire edm orient geometry builder
Created in NX5.0.0
License requirements: cam_base ("CAM BASE")
param | the object to be edited |
unsafe NXOpen.CAM.WireTool NXOpen.CAM.NCGroupCollection.CreateWireTool | ( | NXOpen.CAM.CAMObject | param | ) |
Creates a wire tool
Created in NX9.0.0
License requirements: cam_base ("CAM BASE")
param | wire tool group to be edited |
|
protected |
Advances the enumerator to the next element of the collection.
unsafe NXOpen.CAM.NCGroup NXOpen.CAM.NCGroupCollection.FindObject | ( | string | sid | ) |
Finds the CAM.
NCGroup object with the given identifier as recorded in a journal.
Created in NX4.0.0
License requirements: cam_base ("CAM BASE")
sid | the name of the object |
NXOpen.CAM.NCGroup [] NXOpen.CAM.NCGroupCollection.ToArray | ( | ) |
Returns an array of NXOpen.CAM.NCGroup objects.
|
get |
Returns the tag of this object.