This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two NXOpen.CAE.ResultAccess objects. More...
Public Member Functions | |
| unsafe int | GetLoadcase () |
| Ask Current loadcase number This method has been deprecated. More... | |
| unsafe int | GetIteration () |
| Ask Current iteration number This method has been deprecated. More... | |
| unsafe void | SetLoadcaseIteration (int loadcase, int iteration) |
| Set Current loadcase and iteration. More... | |
| unsafe NXOpen.CAE.Result.Location | GetResultDataLocation () |
| Ask FE entity where the result is defined This method has been deprecated. More... | |
| unsafe void | SetResultDataLocation (NXOpen.CAE.Result.Location location) |
| Set FE entity where the result is defined This method has been deprecated. More... | |
| unsafe bool | GetDBScaling () |
| Ask whether dB Scaling is on or not More... | |
| unsafe void | SetDBScaling (int dBscaling) |
| Set the dB Scaling on or off More... | |
| unsafe double | GetDBreference () |
| Ask the dB Reference value More... | |
| unsafe void | SetDBReference (double dBreference) |
| Set the dB Reference value More... | |
| unsafe NXOpen.CAE.Result.DbScale | GetDBscale () |
| Ask the dB Scale value More... | |
| unsafe void | SetDBscale (NXOpen.CAE.Result.DbScale dbScale) |
| Set the dB Scale value More... | |
| unsafe NXOpen.CAE.Result.Section | GetResultDataSection () |
| Ask section of a FE entity where the result is defined This method has been deprecated. More... | |
| unsafe void | SetResultDataSection (NXOpen.CAE.Result.Section section) |
| Set section of a FE entity where the result is defined This method has been deprecated. More... | |
| unsafe NXOpen.CAE.Result.Section | GetResultBeamSection () |
| Ask section where beam results are defined More... | |
| unsafe void | SetResultBeamSection (NXOpen.CAE.Result.Section section) |
| Set section where beam results are defined More... | |
| unsafe NXOpen.CAE.Result.Section | GetResultShellSection () |
| Ask section where shell results are defined More... | |
| unsafe void | SetResultShellSection (NXOpen.CAE.Result.Section section) |
| Set section where shell results are defined More... | |
| unsafe NXOpen.CAE.Result.Quantity | GetResultDataQuantity () |
| Ask result type This method has been deprecated. More... | |
| unsafe void | SetResultDataQuantity (NXOpen.CAE.Result.Quantity quantity) |
| Set result quantity This method has been deprecated. More... | |
| unsafe NXOpen.CAE.Result.Type | GetResultType () |
| Ask Result type This method has been deprecated. More... | |
| unsafe void | SetResultType (NXOpen.CAE.Result.Type type) |
| Set Result type This method has been deprecated. More... | |
| unsafe NXOpen.CAE.BaseResultType | GetGenericResultType () |
| Ask Result type More... | |
| unsafe void | SetCyclicSymmetricParameters (NXOpen.CAE.CyclicSymmetricParameters type) |
| Set Cyclic Symmetric Parameters type More... | |
| unsafe NXOpen.CAE.CyclicSymmetricParameters | GetCyclicSymmetricParameters () |
| Get Cyclic Symmetric Parameters type More... | |
| unsafe void | SetAxiSymmetricParameters (NXOpen.CAE.AxiSymmetricParameters type) |
| Set Axi Symmetric Parameters type More... | |
| unsafe NXOpen.CAE.AxiSymmetricParameters | GetAxiSymmetricParameters () |
| Get Axi Symmetric Parameters type More... | |
| unsafe void | SetGenericResultType (NXOpen.CAE.BaseResultType type) |
| Set Result type More... | |
| unsafe NXOpen.CAE.Result.Component | GetResultComponent () |
| Ask result component More... | |
| unsafe void | SetResultComponent (NXOpen.CAE.Result.Component component) |
| Set result component More... | |
| unsafe NXOpen.CAE.Result.CoordinateSystem | GetCoordinateSystem () |
| Ask result coordinate system More... | |
| unsafe void | SetCoordinateSystem (NXOpen.CAE.Result.CoordinateSystem coordinate) |
| Set result coordinate system More... | |
| unsafe void | GetSelectedCoordinateSystem (out NXOpen.CAE.Result.CoordinateSystemSource source, out int id) |
| Ask selected coordinate system in which results are to be presented More... | |
| unsafe void | SetSelectedCoordinateSystem (NXOpen.CAE.Result.CoordinateSystemSource source, int id) |
| Set selected coordinate system in which results are to be presented Coordinate systems labels defined in a result file can be retrieved using CAE.Result.GetResultCoordinateSystems More... | |
| unsafe void | SetRotationAxisOfAbsoluteCyndricalCSYS (NXOpen.CAE.Post.AxisymetricAxis axis) |
| Set axis of rotation for axisymmetric results More... | |
| unsafe NXOpen.CAE.Post.AxisymetricAxis | GetRotationAxisOfAbsoluteCyndricalCSYS () |
| Get axis of rotation for axisyymettric results More... | |
| unsafe void | SetBeamResultsInLocalCoordinateSystem (bool local) |
| Presents beam results in local coordinate system (if flag is true) or in the same coordinate system as the rest of the model More... | |
| unsafe bool | GetBeamResultsInLocalCoordinateSystem () |
| Identifies whether beam results are presented in local coordinate system (if true) or in the same coordinate system as the rest of the model More... | |
| unsafe void | MakeElementResult (bool elementResult) |
| Make Nodal and Element-Nodal result to Element Result. More... | |
| unsafe bool | IsForcedElementResult () |
| Ask whether the result is converted as element result More... | |
| unsafe NXOpen.CAE.Result.ElementValueCriterion | GetElementValueCriterion () |
| Ask how element the result is defined. More... | |
| unsafe void | SetElementValueCriterion (NXOpen.CAE.Result.ElementValueCriterion criteria) |
| Set how element the result is defined This option is only valid for nodal and elemen-nodal result; dose not do anything for element result. More... | |
| unsafe NXOpen.CAE.Result.Averaging | InitAveragingCriteria () |
| Ask default averaging criteria More... | |
| unsafe NXOpen.CAE.Result.Averaging | GetAveragingCriteria () |
| Ask averaging criteria. More... | |
| unsafe void | SetAveragingCriteria (NXOpen.CAE.Result.Averaging average) |
| Set averaging criteria More... | |
| unsafe void | SetComputationType (NXOpen.CAE.Result.ComputationType computeType) |
| Set computing type. More... | |
| unsafe NXOpen.CAE.Result.ComputationType | GetComputationType () |
| Get computing type. More... | |
| unsafe void | SetExcludeElementsNotVisible (bool excludeElements) |
| Exclude or include elements which are not visible for computing with sum option. More... | |
| unsafe bool | GetExcludeElementsNotVisible () |
| Ask whether elements which are not visible are consider for summation More... | |
| unsafe NXOpen.CAE.Result.Complex | GetComplexCriterion () |
| If result is complex it returns which component is set(like real or imaginary) More... | |
| unsafe void | SetComplexCriterion (NXOpen.CAE.Result.Complex complex) |
| Set complex criteria More... | |
| unsafe double | GetPhaseAngle () |
| Ask phase angle. More... | |
| unsafe void | SetPhaseAngle (double angle) |
| Sets the phase angle at which result will be evaluated. More... | |
| unsafe int | AskSectionPlyLayer (out int section, out int ply) |
| Ask section, ply and layer More... | |
| unsafe void | SetSectionPlyLayer (int section, int ply, int layer) |
| Set section, ply and layer More... | |
| unsafe double | GetScale () |
| Ask scale More... | |
| unsafe void | SetScale (double scale) |
| Set scale. More... | |
| unsafe NXOpen.Unit | GetUnit () |
| Ask result unit More... | |
| unsafe void | SetUnit (NXOpen.Unit unit) |
| Set result unit More... | |
| unsafe void | SetAbsoluteValue (bool absolute) |
| Set all values to absolute values. More... | |
| unsafe bool | GetAbsoluteValue () |
| Ask whether all values are absolute values More... | |
| unsafe void | SetCalculateBeamStrResults (bool calcBeamStrResults) |
| Sets a flag to calculate beam stresses and strains from element forces and section geometry (if available). More... | |
| unsafe bool | GetCalculateBeamStrResults () |
| Ask if beam stresses and strains are calculated from element forces and section geometry More... | |
| unsafe void | SetBeamFillets (bool beamFillets) |
| Sets the fillets flag More... | |
| unsafe bool | GetBeamFillets () |
| Return the fillets flag More... | |
| unsafe void | SetBeamFilletRadius (double beamFilletRadius) |
| Sets the fillet radius as a fraction of the adjacent dimensions More... | |
| unsafe double | GetBeamFilletRadius () |
| Return the fillet radius More... | |
| unsafe void | DisplayMidnodeValue (bool display) |
| This is display only command. More... | |
| unsafe bool | IsMidnodeValueDisplayed () |
| Ask whether the result at mid nodes are ignored More... | |
| unsafe void | SetTensorComponentAbsoluteValue (NXOpen.CAE.Result.TensorDerivedAbsolute absolute) |
| Set the method used when calculating the absolute values for the derived components of CAE.Result.DataType.Tensor like CAE.Result.Component.MaximumPrincipal More... | |
| unsafe NXOpen.CAE.Result.TensorDerivedAbsolute | GetTensorComponentAbsoluteValue () |
| Get the method used when calculating the absolute values for the derived components of CAE.Result.DataType.Tensor like CAE.Result.Component.MaximumPrincipal More... | |
| unsafe bool | GetIsReferenceNode () |
| Ask if the reference node will be used for result More... | |
| unsafe void | SetIsReferenceNode (bool isReferenceNode) |
| Sets the flag if the reference node will be used for result More... | |
| unsafe int | GetReferenceNodeLabel () |
| Returns the node label which identifies the reference node used when plotting the result More... | |
| unsafe void | SetReferenceNodeLabel (int referenceNodeLabel) |
| Sets the node label which identifies the reference node used when plotting the result More... | |
| unsafe NXOpen.CAE.SignalProcessingDBSettings | GetDbSettings () |
| Gets the dBSettings object required for dB Scaling More... | |
| unsafe NXOpen.CAE.Result.DiscontinuityMethod | GetDiscontinuityMethod () |
| Ask discontinuity method More... | |
| unsafe void | SetDiscontinuityMethod (NXOpen.CAE.Result.DiscontinuityMethod discontinuity) |
| Set discontinuity method More... | |
| unsafe double | GetConvertedDBref () |
| Ask the converted DB Reference value More... | |
| unsafe void | SetComputeOnVisible (bool excludeElements) |
| Exclude or include elements which are not visible for Averaging, Summing, Gap/Discontinuity calculations More... | |
| unsafe bool | GetComputeOnVisible () |
| Ask whether elements which are not visible are to be considerd for Averaging, Summing, Gap/Discontinuity calculations More... | |
Detailed Description
This class is worked as a packet of information that can be either be used to change result state or pass around for information exchange between two NXOpen.CAE.ResultAccess objects.
Use NXOpen.CAE.ResultManager to create an NXOpen.CAE.ResultParameters
You can modifiy these values but validation of correctness will only be perfomed when this object is set to a NXOpen.CAE.ResultAccess object
To obtain an instance of this class use NXOpen.Session.ResultManager .
Created in NX6.0.2
Member Function Documentation
| unsafe int NXOpen.CAE.ResultParameters.AskSectionPlyLayer | ( | out int | section, |
| out int | ply | ||
| ) |
Ask section, ply and layer
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
section ply
- Returns
| unsafe void NXOpen.CAE.ResultParameters.DisplayMidnodeValue | ( | bool | display | ) |
This is display only command.
Setting this value will not change modify ResultAccess queries. But Post view will ignore midnode values during display
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
display
| unsafe bool NXOpen.CAE.ResultParameters.GetAbsoluteValue | ( | ) |
Ask whether all values are absolute values
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Averaging NXOpen.CAE.ResultParameters.GetAveragingCriteria | ( | ) |
Ask averaging criteria.
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.AxiSymmetricParameters NXOpen.CAE.ResultParameters.GetAxiSymmetricParameters | ( | ) |
Get Axi Symmetric Parameters type
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe double NXOpen.CAE.ResultParameters.GetBeamFilletRadius | ( | ) |
Return the fillet radius
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe bool NXOpen.CAE.ResultParameters.GetBeamFillets | ( | ) |
Return the fillets flag
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe bool NXOpen.CAE.ResultParameters.GetBeamResultsInLocalCoordinateSystem | ( | ) |
Identifies whether beam results are presented in local coordinate system (if true) or in the same coordinate system as the rest of the model
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe bool NXOpen.CAE.ResultParameters.GetCalculateBeamStrResults | ( | ) |
Ask if beam stresses and strains are calculated from element forces and section geometry
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Complex NXOpen.CAE.ResultParameters.GetComplexCriterion | ( | ) |
If result is complex it returns which component is set(like real or imaginary)
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.ComputationType NXOpen.CAE.ResultParameters.GetComputationType | ( | ) |
Get computing type.
Created in NX7.5.1
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe bool NXOpen.CAE.ResultParameters.GetComputeOnVisible | ( | ) |
Ask whether elements which are not visible are to be considerd for Averaging, Summing, Gap/Discontinuity calculations
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe double NXOpen.CAE.ResultParameters.GetConvertedDBref | ( | ) |
Ask the converted DB Reference value
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.CoordinateSystem NXOpen.CAE.ResultParameters.GetCoordinateSystem | ( | ) |
Ask result coordinate system
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.CyclicSymmetricParameters NXOpen.CAE.ResultParameters.GetCyclicSymmetricParameters | ( | ) |
Get Cyclic Symmetric Parameters type
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe double NXOpen.CAE.ResultParameters.GetDBreference | ( | ) |
Ask the dB Reference value
Created in NX11.0.0
Deprecated in NX12.0.0. Use NXOpen.CAE.ResultParameters.GetDbSettings instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.DbScale NXOpen.CAE.ResultParameters.GetDBscale | ( | ) |
Ask the dB Scale value
Created in NX11.0.0
Deprecated in NX12.0.0. Use NXOpen.CAE.ResultParameters.GetDbSettings instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe bool NXOpen.CAE.ResultParameters.GetDBScaling | ( | ) |
Ask whether dB Scaling is on or not
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.SignalProcessingDBSettings NXOpen.CAE.ResultParameters.GetDbSettings | ( | ) |
Gets the dBSettings object required for dB Scaling
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.DiscontinuityMethod NXOpen.CAE.ResultParameters.GetDiscontinuityMethod | ( | ) |
Ask discontinuity method
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
- Returns
| unsafe NXOpen.CAE.Result.ElementValueCriterion NXOpen.CAE.ResultParameters.GetElementValueCriterion | ( | ) |
Ask how element the result is defined.
This option is only valid for nodal and elemen-nodal result.
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe bool NXOpen.CAE.ResultParameters.GetExcludeElementsNotVisible | ( | ) |
Ask whether elements which are not visible are consider for summation
Created in NX7.5.1
Deprecated in NX12.0.0. Use NXOpen.CAE.ResultParameters.GetComputeOnVisible instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.BaseResultType NXOpen.CAE.ResultParameters.GetGenericResultType | ( | ) |
Ask Result type
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe bool NXOpen.CAE.ResultParameters.GetIsReferenceNode | ( | ) |
Ask if the reference node will be used for result
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe int NXOpen.CAE.ResultParameters.GetIteration | ( | ) |
Ask Current iteration number This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.GetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe int NXOpen.CAE.ResultParameters.GetLoadcase | ( | ) |
Ask Current loadcase number This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.GetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe double NXOpen.CAE.ResultParameters.GetPhaseAngle | ( | ) |
Ask phase angle.
If complex result is set to Phaseangle type then user can specify an angle at which result will be evaluated
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe int NXOpen.CAE.ResultParameters.GetReferenceNodeLabel | ( | ) |
Returns the node label which identifies the reference node used when plotting the result
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Section NXOpen.CAE.ResultParameters.GetResultBeamSection | ( | ) |
Ask section where beam results are defined
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Component NXOpen.CAE.ResultParameters.GetResultComponent | ( | ) |
Ask result component
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Location NXOpen.CAE.ResultParameters.GetResultDataLocation | ( | ) |
Ask FE entity where the result is defined This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.BaseResultType.Location instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Quantity NXOpen.CAE.ResultParameters.GetResultDataQuantity | ( | ) |
Ask result type This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.GetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Section NXOpen.CAE.ResultParameters.GetResultDataSection | ( | ) |
Ask section of a FE entity where the result is defined This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.GetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Section NXOpen.CAE.ResultParameters.GetResultShellSection | ( | ) |
Ask section where shell results are defined
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Type NXOpen.CAE.ResultParameters.GetResultType | ( | ) |
Ask Result type This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.GetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Post.AxisymetricAxis NXOpen.CAE.ResultParameters.GetRotationAxisOfAbsoluteCyndricalCSYS | ( | ) |
Get axis of rotation for axisyymettric results
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe double NXOpen.CAE.ResultParameters.GetScale | ( | ) |
Ask scale
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe void NXOpen.CAE.ResultParameters.GetSelectedCoordinateSystem | ( | out NXOpen.CAE.Result.CoordinateSystemSource | source, |
| out int | id | ||
| ) |
Ask selected coordinate system in which results are to be presented
Created in NX7.5.1
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
source id
| unsafe NXOpen.CAE.Result.TensorDerivedAbsolute NXOpen.CAE.ResultParameters.GetTensorComponentAbsoluteValue | ( | ) |
Get the method used when calculating the absolute values for the derived components of CAE.Result.DataType.Tensor like CAE.Result.Component.MaximumPrincipal
Created in NX8.0.1
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.Unit NXOpen.CAE.ResultParameters.GetUnit | ( | ) |
Ask result unit
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe NXOpen.CAE.Result.Averaging NXOpen.CAE.ResultParameters.InitAveragingCriteria | ( | ) |
Ask default averaging criteria
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe bool NXOpen.CAE.ResultParameters.IsForcedElementResult | ( | ) |
Ask whether the result is converted as element result
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe bool NXOpen.CAE.ResultParameters.IsMidnodeValueDisplayed | ( | ) |
Ask whether the result at mid nodes are ignored
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Returns
| unsafe void NXOpen.CAE.ResultParameters.MakeElementResult | ( | bool | elementResult | ) |
Make Nodal and Element-Nodal result to Element Result.
Does not do anything if the result is element result already. To define what value should be used to represent an element, use NXOpen.CAE.ResultParameters.SetElementValueCriterion
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
elementResult
| unsafe void NXOpen.CAE.ResultParameters.SetAbsoluteValue | ( | bool | absolute | ) |
Set all values to absolute values.
Warning: Once converted to absolute value it is not possible to revert to original values.
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
absolute
| unsafe void NXOpen.CAE.ResultParameters.SetAveragingCriteria | ( | NXOpen.CAE.Result.Averaging | average | ) |
Set averaging criteria
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
average
| unsafe void NXOpen.CAE.ResultParameters.SetAxiSymmetricParameters | ( | NXOpen.CAE.AxiSymmetricParameters | type | ) |
Set Axi Symmetric Parameters type
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
type
| unsafe void NXOpen.CAE.ResultParameters.SetBeamFilletRadius | ( | double | beamFilletRadius | ) |
Sets the fillet radius as a fraction of the adjacent dimensions
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
beamFilletRadius
| unsafe void NXOpen.CAE.ResultParameters.SetBeamFillets | ( | bool | beamFillets | ) |
Sets the fillets flag
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
beamFillets
| unsafe void NXOpen.CAE.ResultParameters.SetBeamResultsInLocalCoordinateSystem | ( | bool | local | ) |
Presents beam results in local coordinate system (if flag is true) or in the same coordinate system as the rest of the model
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
local
| unsafe void NXOpen.CAE.ResultParameters.SetCalculateBeamStrResults | ( | bool | calcBeamStrResults | ) |
Sets a flag to calculate beam stresses and strains from element forces and section geometry (if available).
Does not affect other result types and element types
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
calcBeamStrResults
| unsafe void NXOpen.CAE.ResultParameters.SetComplexCriterion | ( | NXOpen.CAE.Result.Complex | complex | ) |
Set complex criteria
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
complex
| unsafe void NXOpen.CAE.ResultParameters.SetComputationType | ( | NXOpen.CAE.Result.ComputationType | computeType | ) |
Set computing type.
Created in NX7.5.1
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
computeType
| unsafe void NXOpen.CAE.ResultParameters.SetComputeOnVisible | ( | bool | excludeElements | ) |
Exclude or include elements which are not visible for Averaging, Summing, Gap/Discontinuity calculations
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
excludeElements
| unsafe void NXOpen.CAE.ResultParameters.SetCoordinateSystem | ( | NXOpen.CAE.Result.CoordinateSystem | coordinate | ) |
Set result coordinate system
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
coordinate
| unsafe void NXOpen.CAE.ResultParameters.SetCyclicSymmetricParameters | ( | NXOpen.CAE.CyclicSymmetricParameters | type | ) |
Set Cyclic Symmetric Parameters type
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
type
| unsafe void NXOpen.CAE.ResultParameters.SetDBReference | ( | double | dBreference | ) |
Set the dB Reference value
Created in NX11.0.0
Deprecated in NX12.0.0. Use NXOpen.CAE.ResultParameters.GetDbSettings instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
dBreference
| unsafe void NXOpen.CAE.ResultParameters.SetDBscale | ( | NXOpen.CAE.Result.DbScale | dbScale | ) |
Set the dB Scale value
Created in NX11.0.0
Deprecated in NX12.0.0. Use NXOpen.CAE.ResultParameters.GetDbSettings instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
dbScale
| unsafe void NXOpen.CAE.ResultParameters.SetDBScaling | ( | int | dBscaling | ) |
Set the dB Scaling on or off
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
dBscaling
| unsafe void NXOpen.CAE.ResultParameters.SetDiscontinuityMethod | ( | NXOpen.CAE.Result.DiscontinuityMethod | discontinuity | ) |
Set discontinuity method
Created in NX12.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
- Parameters
-
discontinuity
| unsafe void NXOpen.CAE.ResultParameters.SetElementValueCriterion | ( | NXOpen.CAE.Result.ElementValueCriterion | criteria | ) |
Set how element the result is defined This option is only valid for nodal and elemen-nodal result; dose not do anything for element result.
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
criteria
| unsafe void NXOpen.CAE.ResultParameters.SetExcludeElementsNotVisible | ( | bool | excludeElements | ) |
Exclude or include elements which are not visible for computing with sum option.
Created in NX7.5.1
Deprecated in NX12.0.0. Use NXOpen.CAE.ResultParameters.SetComputeOnVisible instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
excludeElements
| unsafe void NXOpen.CAE.ResultParameters.SetGenericResultType | ( | NXOpen.CAE.BaseResultType | type | ) |
Set Result type
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
type
| unsafe void NXOpen.CAE.ResultParameters.SetIsReferenceNode | ( | bool | isReferenceNode | ) |
Sets the flag if the reference node will be used for result
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
isReferenceNode
| unsafe void NXOpen.CAE.ResultParameters.SetLoadcaseIteration | ( | int | loadcase, |
| int | iteration | ||
| ) |
Set Current loadcase and iteration.
This method has been deprecated. This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.SetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
loadcase loadcase number varies from 0 to N-1 iteration iteration number varies from 0 to N-1
| unsafe void NXOpen.CAE.ResultParameters.SetPhaseAngle | ( | double | angle | ) |
Sets the phase angle at which result will be evaluated.
This is only value if complex result is set to the PhaseAngle type
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
angle
| unsafe void NXOpen.CAE.ResultParameters.SetReferenceNodeLabel | ( | int | referenceNodeLabel | ) |
Sets the node label which identifies the reference node used when plotting the result
Created in NX11.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
referenceNodeLabel
| unsafe void NXOpen.CAE.ResultParameters.SetResultBeamSection | ( | NXOpen.CAE.Result.Section | section | ) |
Set section where beam results are defined
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
section
| unsafe void NXOpen.CAE.ResultParameters.SetResultComponent | ( | NXOpen.CAE.Result.Component | component | ) |
Set result component
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
component
| unsafe void NXOpen.CAE.ResultParameters.SetResultDataLocation | ( | NXOpen.CAE.Result.Location | location | ) |
Set FE entity where the result is defined This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.GetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
location
| unsafe void NXOpen.CAE.ResultParameters.SetResultDataQuantity | ( | NXOpen.CAE.Result.Quantity | quantity | ) |
Set result quantity This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.GetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
quantity
| unsafe void NXOpen.CAE.ResultParameters.SetResultDataSection | ( | NXOpen.CAE.Result.Section | section | ) |
Set section of a FE entity where the result is defined This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.GetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
section
| unsafe void NXOpen.CAE.ResultParameters.SetResultShellSection | ( | NXOpen.CAE.Result.Section | section | ) |
Set section where shell results are defined
Created in NX7.5.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
section
| unsafe void NXOpen.CAE.ResultParameters.SetResultType | ( | NXOpen.CAE.Result.Type | type | ) |
Set Result type This method has been deprecated.
This functionality was moved to this class NXOpen.CAE.BaseResultType , which can be obtained by using NXOpen.CAE.ResultParameters.GetGenericResultType .
Created in NX6.0.2
Deprecated in NX8.0.0. Use NXOpen.CAE.ResultParameters.GetGenericResultType instead.
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
type
| unsafe void NXOpen.CAE.ResultParameters.SetRotationAxisOfAbsoluteCyndricalCSYS | ( | NXOpen.CAE.Post.AxisymetricAxis | axis | ) |
Set axis of rotation for axisymmetric results
Created in NX10.0.0
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
axis
| unsafe void NXOpen.CAE.ResultParameters.SetScale | ( | double | scale | ) |
Set scale.
This will affect all subsequent result query.
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
scale
| unsafe void NXOpen.CAE.ResultParameters.SetSectionPlyLayer | ( | int | section, |
| int | ply, | ||
| int | layer | ||
| ) |
Set section, ply and layer
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
section ply layer
| unsafe void NXOpen.CAE.ResultParameters.SetSelectedCoordinateSystem | ( | NXOpen.CAE.Result.CoordinateSystemSource | source, |
| int | id | ||
| ) |
Set selected coordinate system in which results are to be presented Coordinate systems labels defined in a result file can be retrieved using CAE.Result.GetResultCoordinateSystems
Created in NX7.5.1
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
source id
| unsafe void NXOpen.CAE.ResultParameters.SetTensorComponentAbsoluteValue | ( | NXOpen.CAE.Result.TensorDerivedAbsolute | absolute | ) |
Set the method used when calculating the absolute values for the derived components of CAE.Result.DataType.Tensor like CAE.Result.Component.MaximumPrincipal
Created in NX8.0.1
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
absolute
| unsafe void NXOpen.CAE.ResultParameters.SetUnit | ( | NXOpen.Unit | unit | ) |
Set result unit
Created in NX6.0.2
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
- Parameters
-
unit
The documentation for this class was generated from the following file:
- dotnet_pool/CAE_ResultParameters.cs