- S - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
- S - Static variable in class nxopen.annotations.SizeLetterCode
-
Specifies size letter code "s"
- S - Static variable in class nxopen.cae.FrfSet.NodeComponent
-
s component
- S - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
S-Style
- S - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.DirectionOptions
-
- S101 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 10:1
- S101 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 10:1
- S105 - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
105mm
- S105 - Static variable in class nxopen.display.CameraBuilder.StockLens
-
105mm
- S11 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale
-
a scale of 1:1
- S11 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 1:1
- S11 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale
-
a scale of 1:1
- S11 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 1:1
- S110 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 1:10
- S110 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 1:10
- S1100 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 1:100
- S1100 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 1:100
- S12 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale
-
a scale of 1:2
- S12 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 1:2
- S12 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale
-
a scale of 1:2
- S12 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 1:2
- S120 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 1:20
- S120 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 1:20
- S135 - Static variable in class nxopen.display.CameraBuilder.StockLens
-
135mm
- S14 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale
-
a scale of 1:4
- S14 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale
-
a scale of 1:4
- S15 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 1:5
- S15 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 1:5
- S150 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 1:50
- S150 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 1:50
- S18 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale
-
a scale of 1:8
- S18 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale
-
a scale of 1:8
- S201 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 20:1
- S201 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 20:1
- S21 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale
-
a scale of 2:1
- S21 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 2:1
- S21 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale
-
a scale of 2:1
- S21 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 2:1
- S210 - Static variable in class nxopen.display.CameraBuilder.StockLens
-
210mm
- S28 - Static variable in class nxopen.display.CameraBuilder.StockLens
-
28mm
- S300 - Static variable in class nxopen.display.CameraBuilder.StockLens
-
300mm
- S35 - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
35mm
- S35 - Static variable in class nxopen.display.CameraBuilder.StockLens
-
35mm
- S41 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale
-
a scale of 4:1
- S41 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale
-
a scale of 4:1
- S50 - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
50mm
- S50 - Static variable in class nxopen.display.CameraBuilder.StockLens
-
50mm
- S501 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 50:1
- S501 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 50:1
- S51 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a scale of 5:1
- S51 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a scale of 5:1
- S5TIME - Static variable in class nxopen.ame.PlcDataType
-
- S70 - Static variable in class nxopen.display.CameraBuilder.StockLens
-
70mm
- S81 - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale
-
a scale of 8:1
- S81 - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale
-
a scale of 8:1
- SA_DESCRIPTION - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType
-
name attribute
- SA_FORM - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType
-
form attribute
- SA_MATERIAL - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType
-
material attribute
- SA_NAME - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType
-
name attribute
- SA_SIZE - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType
-
size attribute
- SA_TYPE - Static variable in class nxopen.features.shipdesign.ManufacturingPreparationBuilder.AttributeType
-
type attribute
- SADDLE - Static variable in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
-
Saddle
- SAE - Static variable in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType
-
Use sae data to define steering wheel or pedal
- SAEJ826JUL1995 - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.StandardType
-
1995 SAE j826 Standard Type
- SAEJ826NOV2008 - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.StandardType
-
2008 SAE j826 Standard Type
- SAEJ833 - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.StandardType
-
SAE j833 Standard Type
- saepercentile() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the percentile limit that the manikin represents.
- SAFE_PLANE - Static variable in class nxopen.cam.InspectionMethodBuilder.TransitionTypes
-
Safe Plane Transition Point
- safeClearance() - Method in interface nxopen.cam.GeometrySet
-
Returns the safe clearance
License requirements: None.
- safeClearance() - Method in interface nxopen.cam.OperationBuilder
-
Returns the safe clearance builder
License requirements: None.
- safeClearance() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
Returns the safe clearance
License requirements: None.
- safeClearanceBuilder() - Method in interface nxopen.cam.NcmEngRetBuilder
-
Returns the engage/retract safe clearance builder
License requirements: None.
- safeDistance() - Method in interface nxopen.cam.NcmClearanceBuilder
-
Returns the safe distance for automatic clearance
License requirements: None.
- safeDistance() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Safe Distance
License requirements: None.
- safeDistance() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the Safe Distance
License requirements: None.
- safeDistanceBuilder() - Method in interface nxopen.cam.NcmTransfer
-
Returns the transfer between regions safe distance builder (inheritable tool dep)
License requirements: None.
- safeOrDepartureDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the safe or departure distance
License requirements: None.
- safePlane() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns the safe plane
License requirements: None.
- safePlaneDisplayAction() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Button to display selected safe plane
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- safePlaneSelectAction() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Button to select safe plane
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- safePlaneXform() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the safe plane
License requirements: None.
- SAFETY_BLOCK - Static variable in class nxopen.die.HeelpostBuilder.Types
-
no hole allowed
- SAFETY_FACTOR - Static variable in class nxopen.cae.Result.Quantity
-
- safetyClass() - Method in interface nxopen.annotations.SafetyClassBusinessModifierBuilder
-
Returns the safety class
License requirements: None.
- SafetyClassBusinessModifier - Interface in nxopen.annotations
-
Represents buiness modifier that applies safety classification such as Critical, Major
to a PMI. please see ug_safety_class_busmod.dfa for attribute details.
- SafetyClassBusinessModifierBuilder - Interface in nxopen.annotations
-
- safetyFactor() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the safety factor for failure index, strength ratio and margin of safety calculation
License requirements: None.
- safetyFactor() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the safety factor
License requirements: None.
- safetyMargin() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the safety margin result
License requirements: None.
- safetyMargin() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the margin of safety
License requirements: None.
- safetyMarginFromFlc() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the safety margin from flc
License requirements: None.
- safetyMarginRule() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the safety margin rule
License requirements: None.
- safetyMarginRule() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the strength ratio summary table enveloping rule
License requirements: None.
- SAM0X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType
-
Do not set sampling option
- SAM16X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType
-
Set sampling at 16 times
- SAM2X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType
-
Set sampling at 2 times
- SAM4X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType
-
Set sampling at 4 times
- SAM8X - Static variable in class nxopen.display.StudioImageCaptureBuilder.AASamplesEnumType
-
Set sampling at 8 times
- SAMCEF_DES - Static variable in class nxopen.cae.Result.Filetype
-
- samcefElementType() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the samcef element type
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- samcefElementType() - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
Returns the samcef element type
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- samcefSolidShells() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
- samcefSolidShells() - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
- SAME - Static variable in class nxopen.cam.Blade.MaterialSideType
-
same
- SAME - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.MatSideType
-
same
- SAME - Static variable in class nxopen.cam.DmSurfBuilder.MatSideType
-
same
- SAME - Static variable in class nxopen.cam.GeometrySet.MaterialSideTypes
-
the tool is cutting on the same side as the natural side of the entity
- SAME - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
use setting from transfer between regions
- SAME - Static variable in class nxopen.cam.NcmTransferBuilder.TraverseTypes
-
traverse setting from between regions
- SAME - Static variable in class nxopen.weld.AutoPointBuilder.InterferenceDetails
-
Indicates weld points exist and part name are the same.
- SAME_AS_APPROACH - Static variable in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes
-
Path is locked to approach path.
- SAME_AS_APPROACH_BEFORE_TOOL_CHANGE - Static variable in class nxopen.cam.TurnAvoidanceDepartureBuilder.DeparturePathModes
-
Path is locked to approach path, but applied only before tool change.
- SAME_AS_CLOSED - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Same as Closed Engage (from open)
- SAME_AS_DEFAULT - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
-
Same as Default (Inherit)
- SAME_AS_DEFAULT - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Same as Default (Inherit)
- SAME_AS_DEFAULT - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Same as Default
- SAME_AS_DEPARTURE - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Same as Departure.
- SAME_AS_DISPLAY - Static variable in class nxopen.PartDisplayPartWorkPartOption
-
New work part will be set to the new display part
- SAME_AS_DRIVE_PATH - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Same as drive path
- SAME_AS_ENGAGE - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
-
Same as Engage
- SAME_AS_ENGAGE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Same as (Open) Engage (from retract)
- SAME_AS_ENGAGE - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Same as Engage (only for retract)
- SAME_AS_ENGAGE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Same as Engage
- SAME_AS_ENGAGE - Static variable in class nxopen.cam.TurnThreadEngageRetractBuilder.EngageRetractTypes
-
Same as Engage
- SAME_AS_FACES_DIAMETERS - Static variable in class nxopen.cam.FacesSequence.Types
-
Faces Sequence: Same As Faces/Diameters
- SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedInTypes
-
Test Cut Feed In: Same as First Test Cut
- SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedOutTypes
-
Test Cut Feed Out: Same as First Test Cut
- SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.MeasuringPositionTypes
-
Test Cut Measuring Position: Same as First Test Cut
- SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.ReturnMoveTypes
-
Test Cut Return Move: Same as First Test Cut
- SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StockModeTypes
-
Test Cut Stock Mode: Same as First Test Cut
- SAME_AS_FIRST_TEST_CUT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StopPositionTypes
-
Test Cut Stop Position: Same as First Test Cut
- SAME_AS_FROM - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointModes
-
Point is locked to from point.
- SAME_AS_INPUT - Static variable in class nxopen.cam.PitchSetting.OutputUnitTypes
-
Same as Input
- SAME_AS_LEAD_IN - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes
-
same as lead in
- SAME_AS_LEADING_TO_TRAILING - Static variable in class nxopen.cam.LeadAngles.ControlTypes
-
same as leading to trailing
- SAME_AS_NON_STEEP - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Same as Non-steep
- SAME_AS_NORMAL - Static variable in class nxopen.features.shipdesign.OrientationDefinitionBuilder.PlacementSideTypes
-
The stiffener will be placed on the positive normal side of the
placement faces.
- SAME_AS_OPEN_ENGAGE - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MinClearanceTypes
-
Same as open engage
- SAME_AS_ORIGINAL - Static variable in class nxopen.features.ExtractFaceBuilder.FaceSurfaceType
-
extracted surface is the same as the original surface
- SAME_AS_PART - Static variable in class nxopen.cam.SpunOutlineGeom.CreationTypes
-
spun outline created by the same method as part
- SAME_AS_PLUNGE_RETRACT - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Same as Plunge Retract
- SAME_AS_POCKET_ID - Static variable in class nxopen.cam.MachinePocketGroupBuilder.RegisterType
-
Deprecated.
use same as pocket id
- SAME_AS_POCKET_ID - Static variable in class nxopen.sim.KinematicComponentBuilder.RegisterTypes
-
the pocket id defined the register
- SAME_AS_PROFILE_ENGAGE - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedInTypes
-
Test Cut Feed In: Same as Profile eEgange
- SAME_AS_PROFILE_RETRACT - Static variable in class nxopen.cam.TurnRoughFinishTestCut.FeedOutTypes
-
Test Cut Feed Out: Same as Profile Retract
- SAME_AS_PROJECTION - Static variable in class nxopen.features.GlobalShapingBuilder.DirectionMethodType
-
Overcrown is same as projection direction
- SAME_AS_RETRACT - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MinClearanceTypes
-
Same as retract
- SAME_AS_ROUGHING - Static variable in class nxopen.cam.CutParametersProfileCutRegionsTypes
-
Profile cut regions: Same as Roughing
- SAME_AS_START - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointModes
-
Point is locked start point.
- SAME_AS_TAB_START_POINT - Static variable in class nxopen.cam.TabPointDataBuilder.TabThreadMethodType
-
Same as Tab start point
- SAME_AS_TEMPLATE - Static variable in class nxopen.DxfdwgImporter.UnitsEnum
-
units same as template
- SAME_CLASSIFICATION_AND_MORE_DETAILED_CLASSIFICATION - Static variable in class nxopen.ame.ProductSelectionBuilder.Type
-
- SAME_COMP_RULE - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
global exclusion rule for same component applies
- SAME_CONNECTING_PARTS - Static variable in class nxopen.weld.JointmarkBuilder.ReuseMethod
-
- SAME_ENGINEERING_OBJECT_DEFINITION - Static variable in class nxopen.ame.ProductSelectionBuilder.Type
-
- SAME_GROUP_RULE - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
global exclusion rule for same group applies
- SAME_PART_RULE - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
global exclusion rule for same part applies
- SAME_POSITION_IN_ALL - Static variable in class nxopen.assemblies.AssembliesParameterPropertiesBuilder.ArrangementOptions
-
All components are unvaried
- SAME_RATIO - Static variable in class nxopen.diagramming.SheetElementBuilder.ResizeOptionType
-
- SAME_RATIO_ON_EDGE - Static variable in class nxopen.diagramming.SheetElementBuilder.ResizeOptionType
-
- SAME_RATION_ON_CORNER - Static variable in class nxopen.diagramming.SheetElementBuilder.ResizeOptionType
-
- SAME_TYPES - Static variable in class nxopen.features.SmoothCurveStringBuilder.MergeTypes
-
merge only spline curves
- sameEndOffsets() - Method in interface nxopen.cae.BeamSectionOffsetOptions
-
Returns the flag indicating whether the offset on both fore end and aft end are consistent
License requirements: None.
- sameParent() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
Returns the option for checking the workpiece and electrode part under the same part or not.
- sameWithPlate() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the punch same with plate
License requirements: None.
- sampleDensityIndex() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the sample density index which controls the density of the sample planes.
- sampleDistance() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the sample distance
License requirements: None.
- sampleDistance() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Sample Distance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- sampleDistance() - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
Returns the sample distance
License requirements: None.
- sampleNumber() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the sample number
License requirements: solid_modeling ("SOLIDS MODELING")
.
- samplePoints() - Method in interface nxopen.features.ConcaveFacesBuilder
-
Returns the number of sample points to apply to the analysis.
- sampleRate() - Method in interface nxopen.motion.ControlInputPortBuilder
-
Returns the Sample Rate specifies the sampling frequency in samples per second for this element.
- samplingPointType() - Method in interface nxopen.fields.FieldProfileTable
-
Returns the discrete type
License requirements: None.
- SAND - Static variable in class nxopen.annotations.AreaFillMaterial
-
Sand
- SAND - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
-
- SAND - Static variable in class nxopen.uf.UFDrf.ValidMaterial
-
- sandwichBottomSkinMeshOption() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the bottom-skin-mesh options for the sandwich inflation
License requirements: None.
- sandwichInflation() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the option to (de)activate the sandwich inflatoin
License requirements: None.
- sandwichNumCoreElementLayers() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the number of core element layers for the sandwich inflation
License requirements: None.
- sandwichTopSkinMeshOption() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the top-skin-mesh options for the sandwich inflation
License requirements: None.
- saProject() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the project number assigned to the ship.
- saProject() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the sa project
License requirements: None.
- saturation - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHLS
-
Saturation in HSV pattern is the "vibrancy" of the color Ranges from 0-255
- saturation - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHSV
-
Saturation in HSV pattern is the "vibrancy" of the color Ranges from 0-255
- SAUDI_ARABIA_GULF_STATES_SSA770771GS421442 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType
-
Represents Saudi Arabia - Gulf States : SSA 770/771 GS 421/442 standard
- SAUDI_ARABIA_GULF_STATES_SSA770771GS421442 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType
-
Represents Saudi Arabia - Gulf States : SSA 770/771 GS 421/442 standard
- SAUDI_ARABIA_GULF_STATES_SSA770771GS421442 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
-
Represents Saudi Arabia - Gulf States : SSA 770/771 GS 421/442 standard
- SAVE - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType
-
Saves a design element
- save() - Method in interface nxopen.assemblies.Order
-
Saves an order
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- SAVE - Static variable in class nxopen.AttributePropertiesBuilder.OperationType
-
Save.
- save(BasePart.SaveComponents, BasePart.CloseAfterSave) - Method in interface nxopen.BasePart
-
Saves the part whether it is modified or not.
- save() - Method in interface nxopen.cae.xyplot.Preference
-
Saves preference settings to memory file so that preference setting could be shared among sessions
License requirements: None.
- save(String[], String) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
-
Saves an explicit order defined by the user
License requirements: None.
- save() - Method in interface nxopen.issue.IssueBriefcase
-
- save() - Method in interface nxopen.Layout
-
Saves a layout.
- save(String) - Method in interface nxopen.LoadOptions
-
Saves the current load options settings in a system file
License requirements: None.
- save(String, boolean) - Method in interface nxopen.ModelingViewHighQualityImage
-
Saves the currently displayed high quality image of a view
to a file.
- save() - Method in interface nxopen.options.ChangeList
-
Saves options values at the current level.
- save() - Method in interface nxopen.options.DraftingStandardChangeList
-
Saves the drafting standard defaults at the current level.
- SAVE - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType
-
File Save
- save() - Method in interface nxopen.report.CommandLibrary
-
Saves all commands to their binding xml file.
- save() - Method in interface nxopen.Spreadsheet
-
Saves the spreadsheet in the part file.
- SAVE - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption
-
save sub die base as template
- save() - Method in interface nxopen.uf.UFPart
-
- save(String, String, int, int) - Method in interface nxopen.uf.UFView
-
- SAVE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Save file operation
- SAVE - Static variable in class nxopen.Validation.UpdateTime
-
During save time
- save() - Method in interface nxopen.ViewCollection
-
Saves current view.
- save() - Method in interface nxopen.visualreporting.VisualReport
-
- save() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- save() - Method in interface nxopen.WCS
-
Saves the WCS.
- save2dIpw() - Method in interface nxopen.cam.PlanarMillingBuilder
-
Returns the Save 2D In-Process Workpiece
License requirements: None.
- SAVE_ALL - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType
-
File SaveAll
- SAVE_ALL - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Save all file operation
- SAVE_ALL_AND_CLOSE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Save all and close file operation
- SAVE_AND_CLOSE - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType
-
Saves a design element and if it is a reuse closes the reused part
- SAVE_AND_CLOSE - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType
-
File Save And Close
- SAVE_AND_CLOSE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Save and close file operation
- SAVE_AND_EXIT - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Save and Exit file operation
- SAVE_AND_UPDATE - Static variable in class nxopen.tooling.ConcurrentDesignManagementBuilder.Types
-
the save and update page
- SAVE_AS - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType
-
Save as a design element
- SAVE_AS - Static variable in class nxopen.AttributePropertiesBuilder.OperationType
-
SaveAs.
- SAVE_AS - Static variable in class nxopen.pdm.PartOperationBuilder.OperationType
-
Save As Part
- SAVE_AS - Static variable in class nxopen.tooling.ToolingClonemethod
-
Use part save as method
- SAVE_AS - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Save as file operation
- SAVE_AS_AND_CLOSE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Save as and close file operation
- SAVE_AS_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- SAVE_DESIGN_ELEMENTS - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType
-
Save Design Elements
- SAVE_DML - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a statement defining a Save DML statement
- SAVE_IF_PASSED - Static variable in class nxopen.validate.RequirementCheck.SaveResultsToTeamcenterOptions
-
Perform save only if the result is passed.
- SAVE_IF_PASSED - Static variable in class nxopen.validate.ValidatorOptions.SaveModeTypes
-
Perform save only if the checking is passed.
- SAVE_MY_COMPONENTS - Static variable in class nxopen.tooling.ConcurrentDesignManagementBuilder.UpdateTypes
-
the save my components action
- SAVE_NO_SHADED_OR_PATTERN - Static variable in class nxopen.PartSaveOptions.PatternData
-
- SAVE_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- SAVE_PATTERN_AND_SHADED - Static variable in class nxopen.PartSaveOptions.PatternData
-
- SAVE_PATTERN_ONLY - Static variable in class nxopen.PartSaveOptions.PatternData
-
- SAVE_PCS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Save current PCS
- SAVE_PRECISE_ASSEMBLY - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType
-
File SavePreciseAssembly
- SAVE_WORK_PART_ONLY - Static variable in class nxopen.pdm.SmartSaveBuilder.SaveType
-
File SaveWorkPartOnly
- saveActionSettings(String) - Method in interface nxopen.cae.qualityaudit.ActionList
-
Export action settings to file
License requirements: None.
- saveAdvancedDisplayFacets() - Method in interface nxopen.preferences.PartVisualizationPerformance
-
Returns the save advanced facets.
- saveAfuOption() - Method in interface nxopen.cae.PostGraphBuilder
-
Returns the save in AFU option to save graph data as AFU records
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- saveAll() - Method in interface nxopen.PartCollection
-
Saves all modified parts in a session.
- saveAll() - Method in interface nxopen.uf.UFPart
-
- saveAllActiveViews() - Method in interface nxopen.uf.UFView
-
- SaveAllData() - Constructor for class nxopen.PartCollection.SaveAllData
-
- SaveAllData() - Constructor for class nxopen.uf.UFPart.SaveAllData
-
- saveAllIterationResults() - Method in interface nxopen.cae.optimization.DAOStopCondition
-
Returns the save all interation results flag
License requirements: None.
- saveAllTemplates() - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Saves all templates
License requirements: None.
- saveAllTree() - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Identify all the connected part information as "saved" so the commit will save the information.
- saveAndExportStatus() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the value that indicates whether to save part and export analysis data or not.
- saveAndExportStatus() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the value that indicates whether to save part and export analysis data or not.
- saveAndGetComponentParent(NXObject) - Method in interface nxopen.tooling.SplitInsertBuilder
-
Suppress child feature.
- saveAnnotationType(AnnotationSettingsBuilder.AnnotationTypeEnum, boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
API used to save settings data
License requirements: drafting ("DRAFTING")
.
- saveAs(String) - Method in interface nxopen.assemblies.Order
-
Creates a copy of the order, and gives the copy a new name.
- saveAs(String) - Method in interface nxopen.BasePart
-
Creates copy of target part.
- saveAs(String) - Method in interface nxopen.Layout
-
Saves a layout with a different name.
- saveAs() - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder
-
Returns an API to get save as type
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- saveAs() - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
Returns an API to get save as type
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- saveAs(String, String) - Method in interface nxopen.sim.postconfigurator.PostConfiguratorBuilder
-
Saves the post configurator data in different name.
- saveAs(String) - Method in interface nxopen.uf.UFPart
-
- saveAs(View, String, boolean, boolean) - Method in interface nxopen.ViewCollection
-
Saves a view with user specified name.
- saveAsAction() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the save as action type of a design element
License requirements: None.
- saveAsDefault() - Method in interface nxopen.weld.ExportWeldBuilder
-
Save exported attributes as default template.
- saveAsLocation() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
Returns the save as file browser
License requirements: None.
- saveAsModelView() - Method in interface nxopen.annotations.SearchModelViewBuilder
-
TODO: fill in a description for this
License requirements: None.
- saveAsName() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the cut save as name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- saveAsPartfile() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the save as partfile
License requirements: None.
- saveAsPreservingCase(View, String, boolean, boolean) - Method in interface nxopen.ViewCollection
-
Preserve case for user defined view names.
- SaveAsReviseCallbackData - Interface in nxopen.pdm
-
JA interface for SaveAsReviseCallbackData object
This cannot be created
.
- SaveAsReviseCallbackData.SourceObjectsData - Class in nxopen.pdm
-
- saveAsReviseObserver() - Method in interface nxopen.pdm.PdmSession
-
- SaveAsReviseObserver - Interface in nxopen.pdm
-
This class is responsible for invoking registered callback when objects goes for SaveAs and Revise and after the process.
- SaveAsReviseObserver.PostcopyoperationCb - Interface in nxopen.pdm
-
User defined postcopyoperation callback that is called after SaveAs and Revise process
- SaveAsReviseObserver.PrecopyoperationCb - Interface in nxopen.pdm
-
User defined precopyoperation callback that is called just before SaveAs and Revise process
- saveAssociativeCurves() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the save associative curves toggle value
License requirements: None.
- saveAsTemplate(String, String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Saves to new template file
License requirements: None.
- saveAsTextFile(String, String, boolean) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
-
Saves the selected saved order in the form of a text file
License requirements: None.
- saveBookmark(String, BasePart.BookmarkOption) - Method in interface nxopen.BasePart
-
Saves a bookmark file.
- saveBuilderData() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Save the data for the "Define Sheets" builder
License requirements: None.
- saveCgm() - Method in interface nxopen.PlotBuilder
-
Saves the selected sheets as CGM files.
- saveCgm(Tag, UFPlot.JobOptions, String, UFPlot.BannerOptions, String) - Method in interface nxopen.uf.UFPlot
-
- saveCgmForPlotLayout(String, UFPlot.BannerOptions, String) - Method in interface nxopen.uf.UFPlot
-
- saveChanges() - Method in interface nxopen.issue.IssueContent
-
Saves the changes to issue server
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- saveChanges() - Method in interface nxopen.issue.IssueList
-
Saves the modified
IssueContent
s
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- saveColors() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Save drawing sheet colors
License requirements: None.
- saveComponentPartFilesDuringLoad() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the save component part files flag during load for I-DEAS
License requirements: None.
- saveConfig() - Method in interface nxopen.issue.IssueList
-
Saves the config of
IssueList
to server
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- saveConfigurationFile(String) - Method in interface nxopen.drawings.SettingsBuilder
-
API used to save settings data
License requirements: drafting ("DRAFTING")
.
- saveConfigureFile(int) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Saves the configure file.
- saveConstraints() - Method in interface nxopen.features.DimensionBuilder
-
Returns the SaveConstraints builder which is used by ADM Dimension Features.
- saveConstraints() - Method in interface nxopen.geometricutilities.SaveConstraintsBuilder
-
Returns the flag indicating whether to save the constraints or not
License requirements: None.
- SaveConstraintsBuilder - Interface in nxopen.geometricutilities
-
Represents a builder for a Save Constraints.
- saveContactDisplayDataFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the save contact displat data flag
License requirements: None.
- saveCurves(String) - Method in interface nxopen.display.BoundedGridBuilder
-
Creates curves by intersecting the bounded grid with all bodies in
the part of the grid object.
- saveCurves(String) - Method in interface nxopen.display.DynamicSectionBuilder
-
Creates curves by intersecting all clipping planes of the section with
all visible bodies in the scene and adds them to the group created with the
specified name.
- SAVED - Static variable in class nxopen.assemblies.Order.State
-
Order is saved
- saved - Variable in class nxopen.uf.UFPart.UpdateFamilyInstanceData
-
- SAVED - Static variable in class nxopen.View.ScaleAdjustment
-
- SAVED - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
- saveDataForFeatureEdit() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option "Save Data for Feature Edit" specifies what additional data will
be saved in the part to enhance feature edit.
- saveDestination() - Method in interface nxopen.visualreporting.VisualReport
-
- saveDestination() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- saveDid() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the save device id
License requirements: None.
- saveDirectory() - Method in interface nxopen.partfamily.TemplateManager
-
Returns the save directory path value
License requirements: solid_modeling ("SOLIDS MODELING")
.
- saveDisplayFacets() - Method in interface nxopen.BasePart
-
Returns whether display quality facets are saved in the part file
License requirements: None.
- saveDmlDidLabel() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the save DML DID label
License requirements: None.
- saveDmlPcsLabel() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the save DML PCS label
License requirements: None.
- saveDmlPointData() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the save DML point data
License requirements: None.
- saveDmlVersion() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the save DML version
License requirements: None.
- saveDropPointPosition(Point3d) - Method in interface nxopen.tooling.FastenerAssy
-
Keep the first drop point position
License requirements: None.
- saveEdgePrepValues(EdgePrepValuesBuilder) - Method in interface nxopen.weld.JointItemBuilder
-
Save edge prep values to the Welding Joint.
- saveEditingFillComponentPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.MoldFillingBuilder
-
Saves the position of fill component to be edit.
- saveFaceColors() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Save Face Colors on Exit
License requirements: None.
- saveFamilyAndApplyValues(InstanceDefinition) - Method in interface nxopen.partfamily.TemplateManager
-
Save part family and apply the values of chosen family member definition to the template part,
It returns failure codes through errorCode.
- saveFamilyAndCreateMembers(InstanceDefinition[]) - Method in interface nxopen.partfamily.TemplateManager
-
Save part family and create the family members supplied through input array.
- saveFamilyAndFixOrphanMembers(boolean, InstanceDefinition[]) - Method in interface nxopen.partfamily.TemplateManager
-
Save part family and fix the orphan family members supplied through input array.
- saveFamilyAndUpdateMembers(boolean, InstanceDefinition[]) - Method in interface nxopen.partfamily.TemplateManager
-
Save part family and update the family members supplied through input array.
- saveFiles(File[]) - Method in interface nxopen.markup.MarkupFileCollection
-
Saves a list of
File
License requirements: None.
- saveFilletCurves() - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Save the corner fillet curves.
- saveFlag() - Method in interface nxopen.cam.CutterExport
-
Returns the export type
License requirements: None.
- saveGeometry() - Method in interface nxopen.cae.DurabilityEventSolverBuilder
-
Returns the geometry save flag.
- saveGeometry() - Method in interface nxopen.cae.DurabilitySolverBuilder
-
Returns the geometry save flag.
- saveGraphObjectToAfu(String, Graph, Graph) - Method in interface nxopen.motion.MotionSolution
-
Save the result of graph to afu file
License requirements: mechanisms ("MECHANISMS")
.
- saveGraphObjectToSpreadsheet(Graph, Graph[], boolean, boolean) - Method in interface nxopen.motion.MotionSolution
-
Save the result of graph to spreadsheet
License requirements: mechanisms ("MECHANISMS")
.
- saveIgesSettings(String) - Method in interface nxopen.NXTo2dCreator
-
Saves the save settings - this will save iges the settings to a file sepcified
License requirements: None.
- SaveImageFileBrowserBuilder - Interface in nxopen.display
-
- SaveImageFileBrowserBuilder.FileFormats - Class in nxopen.display
-
To specify the Ray Traced Studio static image file format
- saveInterference - Variable in class nxopen.uf.UFClear.Pref
-
- saveInterferenceGeometry() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the setting to determine if interference geometry should be saved.
- saveIpwModel() - Method in interface nxopen.cam.Preferences
-
Returns the ipw model
License requirements: None.
- saveLayout() - Method in interface nxopen.cam.LayoutCiBuilder
-
Method to save the layer layout.
- saveLayoutAtExit() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the save layout at exit flag.
- saveLevelBasedIpw() - Method in interface nxopen.cam.Preferences
-
Returns the level based ipw
License requirements: None.
- saveLibraryPath(String, String) - Method in interface nxopen.tooling.AddReusablePart
-
Saves the library name and path of the reusable component
License requirements: None.
- saveListingWindow(String) - Method in interface nxopen.uf.UFUi
-
- saveLog(String) - Method in interface nxopen.report.AutomationLogger
-
Saves the messages in the logger to a file.
- saveMasterPart() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify whether or not the master part will be saved before entering the scenario.
- saveMasterPath(boolean) - Method in interface nxopen.cam.Operation
-
Save Master Tool Path for AutoQC
License requirements: cam_base ("CAM BASE")
.
- saveMaterialsButton() - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
To save to System Studio Materials
License requirements: studio_render ("UG STUDIO RENDER")
.
- saveMemoryFile() - Method in interface nxopen.report.ReportPreference
-
Saves preference settings to memory file
License requirements: None.
- saveModelViewOrder(String[], String) - Method in interface nxopen.annotations.PmiManager
-
Saves an explicit order defined by the user
License requirements: geometric_tol ("GDT")
.
- saveName() - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
-
Returns the save name
License requirements: None.
- saveNode(NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Identify the connected part information as "saved" so commit will save the information.
- saveNxto2dSettings(String) - Method in interface nxopen.NXTo2dCreator
-
Returns the save settings - this will save nxto2d the settings to a file sepcified
License requirements: None.
- saveOptions() - Method in interface nxopen.BasePart
-
Returns the PartSaveOptions instance belonging to this part .
- saveOptions() - Method in interface nxopen.PartCollection
-
The
SaveOptions
that determines how parts are saved in this session
Created in NX3.0.0
- SaveOptions - Interface in nxopen
-
Contains accessor methods for all part save options that follow the session.
- savePartFamily() - Method in interface nxopen.partfamily.TemplateManager
-
Save the changes in template manager to core part family
License requirements: solid_modeling ("SOLIDS MODELING")
.
- savePartFile() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of saving part file after checking finished.
- savePath(Path) - Method in interface nxopen.cam.CAMObject
-
This must be called to establish proper part status
License requirements: cam_base ("CAM BASE")
.
- savePcsLabel() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the save pcs label
License requirements: None.
- savePositioningOriginPlacement(String, int) - Method in interface nxopen.tooling.AddReusablePart
-
Keep positioning offset and placement index
License requirements: None.
- savePreciseAssembly(Tag, boolean) - Method in interface nxopen.uf.UFUgmgr
-
- saveProject() - Method in interface nxopen.ame.ApplicationBuilder
-
Save the current Automation Designer project.
- saveRecords(int[], String[], String, boolean) - Method in interface nxopen.cae.xyplot.Plot
-
Saves plotted records on a graph to an afu file.
- saveRecordsToCsv(int[], String[], String, boolean) - Method in interface nxopen.cae.xyplot.Plot
-
Saves plotted records on a plot graph to a CSV file.
- saveRelation() - Method in interface nxopen.features.MakeOffsetBuilder
-
Returns the keep relation.
- saveRequests(int, PenetrationRequest[]) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Save the requests
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- saveResult() - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The save all to part
License requirements: ugweld ("UG WELD")
.
- saveResultInPart() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of saving check results into part file.
- saveResultInTeamcenter() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of saving check results into Teamcenter.
- saveResults() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
- saveResultsInPart() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
Returns the option for saving checking results in part.
- saveResultsToTeamcenterOption() - Method in interface nxopen.validate.RequirementCheck
-
Returns the Save Results to Teamcenter option
License requirements: None.
- saveRollbackData() - Method in interface nxopen.preferences.SessionModeling
-
- saveScenario() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify whether or not the scenario will be saved.
- saveScenario() - Method in interface nxopen.uf.UFSf
-
- saveSelectedWTAnalysisResultsAO(TaggedObject) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Save the selected wall thickness analysis results display AO
License requirements: None.
- saveSetting() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the option for saving pocket check result in part.
- saveSettings(String) - Method in interface nxopen.AcisExporter
-
Save the settings - this will save the settings to a file sepcified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.AcisImporter
-
Save the settings - this will save the settings to a file specified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.Catiav4Creator
-
The save settings - this will save the settings to a file sepcified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.Catiav4Importer
-
Save the settings - this will save the settings to a file sepcified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.Catiav5Creator
-
Save the settings - this will save the settings to a file sepcified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.Catiav5Importer
-
Save the settings - this will save the settings to a file sepcified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.DxfdwgCreator
-
Saves the save settings - this will save the settings to a file sepcified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.DxfdwgImporter
-
Saves the save settings - this will save the settings to a file specified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.IgesCreator
-
The save settings - this will save the settings to a file sepcified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.IgesImporter
-
Returns the save settings - this will save the settings to a file specified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.ProeImporter
-
Save the settings - this will save the settings to a file specified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.Step203Creator
-
- saveSettings(String) - Method in interface nxopen.Step203Importer
-
Saves the save settings - this will save the settings to a file specified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.Step214Creator
-
- saveSettings(String) - Method in interface nxopen.Step214Importer
-
Saves the save settings - this will save the settings to a file specified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.Step242Importer
-
Saves the save settings - this will save the settings to a file specified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.StepCreator
-
The save settings - this will save the settings to a file sepcified
License requirements: None.
- saveSettings(String) - Method in interface nxopen.VirtuallabImporter
-
Save the settings - this will save the settings to a file specified
License requirements: None.
- saveSettingsToFile(String) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Save simulation settings to xml file
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- saveSimulation(NXObject, String) - Method in interface nxopen.motion.MotionSimulation
-
- saveSimulation(NXObject, NXObject) - Method in interface nxopen.motion.MotionSimulation
-
- SaveSnapshotBuilder - Interface in nxopen.sim
-
- saveSpinningIpwAsPart(Tag, String) - Method in interface nxopen.uf.UFTurn
-
- saveState() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the save state
License requirements: None.
- saveStatus - Variable in class nxopen.PartCollection.ImportToolDesignPackageData
-
Parts that could not be saved and their associated errors.
- saveStatus - Variable in class nxopen.PartCollection.SaveAllData
-
Parts that could not be saved and their associated errors.
- saveTemplate(String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Saves to template file
License requirements: None.
- saveThicknessUDO(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Set the flag for saving to Wall Thickness UDO.
- saveToFile(String) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Save the manikin size definition into a file.
- saveToFile(String) - Method in interface nxopen.motion.TireProperty
-
- saveToFile(String) - Method in interface nxopen.report.ResultXmlFileWriter
-
Exports all document data to result XML file
License requirements: None.
- saveToFile() - Method in interface nxopen.weld.ExportWeldBuilder
-
Save exported attributes to a template file.
- saveToLayer() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Save results to layer
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- saveToLayer() - Method in interface nxopen.cam.InspectionSaveToLayerBuilder
-
Saves measured data to a layer.
- SaveToLibraryBuilder - Interface in nxopen.ame
-
- saveToSystemStudioMaterials(String) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
Saves the material to System Studio Materials which is a directory under
ugphoto/IrayPlus_ug_canned_mattex.
- saveToTeamcenter() - Method in interface nxopen.mechatronics.MechatronicsManager
-
Saves the data model to teamcenter.
- saveToTeamcenter(boolean, boolean, boolean) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Saves the data model to teamcenter.
- saveToXmlFile(String) - Method in interface nxopen.mechatronics.ExpressionBlockBuilder
-
Save data to xml file.
- saveUdoData() - Method in interface nxopen.tooling.FastenerAssy
-
Saves UDO data for fastener assembly
License requirements: None.
- saveUserSymbolPart(MasterCustomSymbolData) - Method in interface nxopen.annotations.AnnotationManager
-
- saveViewCacheSettings() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Cache the current view settings.
- saveWidths() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Save drawing sheet widths
License requirements: None.
- saveWithDescription(String, BasePart.BookmarkOption, String) - Method in interface nxopen.gateway.BookmarkFile
-
Creates a bookmark file including a description.
- saveWorkOnly() - Method in interface nxopen.uf.UFPart
-
- saveXmlTransform() - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
Returns the save xml transform
License requirements: None.
- SAWTOOTH - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Sawtooth
- SAWTOOTH - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
- SAWTOOTH - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Sawtooth
- SBEND - Static variable in class nxopen.preferences.RoutingPath.AllowedCornerType
-
UF_ROUTE_AV_CORNERS_SBEND
- SBEND - Static variable in class nxopen.routing.CornerTypeBuilder.Type
-
- SBEND - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption
-
90 degree bend
- SBendCorner - Interface in nxopen.routing
-
The Routing SBendCorner defines a S-Bend.
- SBendCorner.SBendData - Class in nxopen.routing
-
- SBendCornerCollection - Interface in nxopen.routing
-
- SBendCornerCollection.ComputeSBendData - Class in nxopen.routing
-
- sbendCorners() - Method in interface nxopen.routing.RouteManager
-
SBendCorner collection .
- SBendData() - Constructor for class nxopen.routing.SBendCorner.SBendData
-
- sbendType - Variable in class nxopen.routing.SBendCorner.SBendData
-
S-Bend type
- SBSWEB_THICKENESS - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.SetBackMethod
-
SBS Web Thickness
- SC_DESIGNER - Static variable in class nxopen.motion.MotionEnvironment.Solver
-
NX Motion solver
- SCALABLE - Static variable in class nxopen.GroupBuilder.SketchType
-
A sketch group which corresponds to a Scalable Sketch constraint
- SCALABLE_SET - Static variable in class nxopen.uf.UFSket.ConType
-
- SCALAR - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
represents that the data is scalar
- SCALAR - Static variable in class nxopen.cae.Result.Component
-
- SCALAR - Static variable in class nxopen.cae.Result.DataType
-
- Scalar - Interface in nxopen
-
Represents a scalar.
- Scalar.DimensionalityType - Class in nxopen
-
Specifies the dimensionality of the scalar.
- SCALAR1 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR10 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR11 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR12 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR2 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR3 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR4 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR5 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR6 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR7 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR8 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR9 - Static variable in class nxopen.cae.Result.Component
-
- SCALAR_DIMENSIONALITY_AREA - Static variable in class nxopen.uf.UFSo.ScalarDimOption
-
- SCALAR_DIMENSIONALITY_LENGTH - Static variable in class nxopen.uf.UFSo.ScalarDimOption
-
- SCALAR_DIMENSIONALITY_NONE - Static variable in class nxopen.uf.UFSo.ScalarDimOption
-
- SCALAR_DIMENSIONALITY_VOLUME - Static variable in class nxopen.uf.UFSo.ScalarDimOption
-
- SCALAR_FIELD_TABLE_WRAPPER - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- SCALAR_FIELD_WRAPPER - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- SCALAR_FIELD_WRAPPER - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
BASE_PROPERTY_TABLE_property_type_scalar_field_wrapper
- SCALAR_TABLE - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- SCALAR_TABLE - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
BASE_PROPERTY_TABLE_property_type_scalar_table
- ScalarArrayWithUnitsPropertyValueData() - Constructor for class nxopen.BasePropertyTable.ScalarArrayWithUnitsPropertyValueData
-
- ScalarCollection - Interface in nxopen
-
Represents a collection of
Scalar
objects.
- scalarFactor() - Method in interface nxopen.cae.responsesimulation.FunctionComponentData
-
Returns the scalar factor
License requirements: nx_response_anlys ("NX Response Analysis")
.
- ScalarFieldTableRowColData() - Constructor for class nxopen.BasePropertyTable.ScalarFieldTableRowColData
-
- ScalarFieldWrapper - Interface in nxopen.fields
-
This class defines a scalar value that is internally
backed up by a (optionally scaled) field or an expression.
- ScalarForce - Interface in nxopen.motion
-
Represents the Motion ScalarForce class.
- ScalarForceBuilder - Interface in nxopen.motion
-
- ScalarForceBuilder.ApplicationType - Class in nxopen.motion
-
the application type.
- ScalarForceBuilder.DirectionType - Class in nxopen.motion
-
the Direction type.
- ScalarForceCollection - Interface in nxopen.motion
-
Represents a Scalar Force Collection.
- scalarForces() - Method in interface nxopen.motion.MotionManager
-
- ScalarForceTorque() - Constructor for class nxopen.uf.UFMotion.ScalarForceTorque
-
- ScalarForceTorque(String, Tag, Tag, Tag, Tag, Tag, Tag) - Constructor for class nxopen.uf.UFMotion.ScalarForceTorque
-
- ScalarMatrixValue - Interface in nxopen
-
Represents a General M x N matrix of scalar (real) values.
- scalarObject() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the scalar object
License requirements: None.
- scalars() - Method in interface nxopen.BasePart
-
Returns the ScalarCollection instance belonging to this part .
- ScalarTableValue - Interface in nxopen
-
Represents a General M x N table of scalar (real) values.
- ScalarTorque - Interface in nxopen.motion
-
Represents the Motion ScalarTorque class.
- ScalarTorqueBuilder - Interface in nxopen.motion
-
- ScalarTorqueBuilder.AppType - Class in nxopen.motion
-
the application type
- ScalarTorqueBuilder.DirectionType - Class in nxopen.motion
-
the direction
- ScalarTorqueBuilder.ScalarTorqueType - Class in nxopen.motion
-
the torque type
- ScalarTorqueCollection - Interface in nxopen.motion
-
Represents a collection of motion scalar torque
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- scalarTorques() - Method in interface nxopen.motion.MotionManager
-
- ScalarWithDataPropertyValueData() - Constructor for class nxopen.cae.PropertyTable.ScalarWithDataPropertyValueData
-
- scale() - Method in interface nxopen.annotations.BalloonNoteBuilder
-
Returns the scale
License requirements: None.
- scale() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the scale
License requirements: None.
- scale() - Method in interface nxopen.annotations.CustomSymbolData
-
- scale() - Method in interface nxopen.annotations.HatchBuilder
-
- scale() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the scale
License requirements: None.
- scale() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the scaling factor for the welding symbol
License requirements: None.
- scale() - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Returns the DOF Set display scaling factor
this option specifies the scale of the graphic symbol relative to the size of the bounding box of the FE model.
- scale() - Method in interface nxopen.cae.DeformationParameters
-
Returns the scale to be applied to the deformation value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- scale() - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder
-
Returns the scale.
- scale() - Method in interface nxopen.cae.DurabilityLoadPatternBuilder
-
Returns the scale.
- scale() - Method in interface nxopen.cae.optimization.TBSShapeOptimizationParameters
-
Returns the scale factor
License requirements: None.
- scale - Variable in class nxopen.cae.Post.Colorbar
-
- scale() - Method in interface nxopen.cae.responsesimulation.RSDisplayObject
-
Returns the RS display scaling factor
this option specifies the scale of the graphic symbol relative to the size of the bounding box of the RS OBject.
- scale() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the BC display scaling factor
this option specifies the scale of the graphic symbol relative to the size of the bounding box of the FE model.
- scale() - Method in interface nxopen.cae.ThicknessBuilder
-
Returns the thickness scale
License requirements: None.
- SCALE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
scale
- SCALE - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
-
scale
- scale() - Method in interface nxopen.CGMBuilder
-
Returns the scale factor to be used when creating a CGM.
- SCALE - Static variable in class nxopen.die.QuickBinderWrapBuilder.EditSizeType
-
- scale() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal scale
License requirements: None.
- scale() - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
Returns the scale
License requirements: studio_render ("UG STUDIO RENDER")
.
- scale() - Method in interface nxopen.drawings.BaseViewBuilder
-
Returns the view scale
License requirements: None.
- scale() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns the scale
License requirements: None.
- scale() - Method in interface nxopen.drawings.DrawingViewBuilder
-
Returns the view scale
License requirements: None.
- scale() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the scale of a member view.
- scale() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the view scale
License requirements: None.
- scale() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the scale toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
- scale() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the scale definition on the GENERAL tab of the View Style Dialog
License requirements: None.
- scale() - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
Returns the projected view style scale toggle on the PROJECTED tab of the View Style Dialog
License requirements: None.
- scale() - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
Returns the scale toggle on the SECTION CONSTRAINTS tab of the View Style Dialog
License requirements: None.
- Scale - Interface in nxopen.features
-
Represents a scale feature.
- scale() - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
Returns the view Scale
License requirements: None.
- SCALE - Static variable in class nxopen.features.StudioXformBuilder.Types
-
Deprecated.
Scale type of Xform
- SCALE - Static variable in class nxopen.features.StudioXformBuilderEx.Types
-
Scale type of Xform
- scale() - Method in interface nxopen.features.subdivision.SubdivisionSubdivideFaceBuilder
-
Returns the scale factor.
- scale() - Method in interface nxopen.fields.FieldProfileTable
-
Returns the scale
License requirements: None.
- scale() - Method in interface nxopen.geometricanalysis.DupinBuilder
-
Returns the scale factor to apply to the display of the dupin indicatrix.
- scale(TransformerData.ObjectType, double) - Method in interface nxopen.geometricutilities.TransformerData
-
Sets the scale factor.
- SCALE - Static variable in class nxopen.MeshProfileString.Type
-
- scale() - Method in interface nxopen.PartImporter
-
Returns the scale.
- scale() - Method in interface nxopen.pid.EquipmentBuilder
-
Returns the scale value.
- scale() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the scale value.
- scale() - Method in interface nxopen.PrintPDFBuilder
-
Returns the scale factor to be used when creating a PDF document.
- scale(double) - Method in interface nxopen.Sketch
-
Scale the sketch entities by the given scale factor.
- scale - Variable in class nxopen.uf.UFCgm.Size
-
- scale - Variable in class nxopen.uf.UFDrf.Areafill
-
- scale - Variable in class nxopen.uf.UFDrf.CustomSymbol
-
- scale(double, double[]) - Method in interface nxopen.uf.UFVec2
-
- scale(double, double[]) - Method in interface nxopen.uf.UFVec3
-
- scale(double, double[]) - Method in interface nxopen.uf.UFVec4
-
- scale() - Method in interface nxopen.View
-
Returns the view scale.
- scale() - Method in interface nxopen.Xform
-
Returns the scale
License requirements: None.
- scale1 - Variable in class nxopen.uf.UFVec2.ComponentsData
-
- scale2 - Variable in class nxopen.uf.UFVec2.ComponentsData
-
- SCALE_ACADWIDTH_FACTOR_WITH_SPECIFIED_VALUE - Static variable in class nxopen.DxfdwgImporter.AspectRatioOptions
-
- SCALE_AND_ASPECT_RATIO - Static variable in class nxopen.annotations.TextWithSymbolsBuilder.SymbolSizingMethod
-
Size using scale and aspect ratio
- SCALE_ASPECT_RATIO - Static variable in class nxopen.annotations.UserSymbolPreferences.SizeType
-
scale and aspect ratio
- SCALE_ASPECT_RATIO - Static variable in class nxopen.uf.UFDrf.UdsSizeType
-
- SCALE_FACTOR - Static variable in class nxopen.cae.ConvexMeshBuilder.OffsetMethodOption
-
Deprecated.
- SCALE_FACTOR - Static variable in class nxopen.CGMBuilder.SizeOption
-
Scale Factor, scales the CGM based on user defined scale field
- SCALE_FACTOR - Static variable in class nxopen.PrintPDFBuilder.SizeOption
-
Scale Factor
- SCALE_INTEGER - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Scale item
- SCALE_ITEM - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
This is a scale item
- SCALE_ITEM - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
This is a scale item
- SCALE_MODEL - Static variable in class nxopen.cae.NodeTranslateBuilder.MethodType
-
scale model
- SCALE_NXASPECTRATIO_WITH_SPECIFIED_VALUE - Static variable in class nxopen.DxfdwgCreator.WidthfactorMethodOptions
-
- SCALE_REAL - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Real Scale item
- SCALE_TYPE_AXISYMMETRIC - Static variable in class nxopen.uf.UFModl.ScaleType
-
- SCALE_TYPE_GENERAL - Static variable in class nxopen.uf.UFModl.ScaleType
-
- SCALE_TYPE_UNIFORM - Static variable in class nxopen.uf.UFModl.ScaleType
-
- SCALE_UNIFORMLY - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale uniformly
- SCALE_X - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- SCALE_Y - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- SCALE_Z - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- SCALEABOUTOBJECTCENTER - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingCenterType
-
Scale center at the object center
- SCALEABOUTPOINT - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingCenterType
-
Scale center at a point
- SCALEABOUTSELECTED - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingCenterType
-
Scale center at the selected object
- scaleAlongAxis() - Method in interface nxopen.features.ScaleBuilder
-
Returns the scale along axis
License requirements: None.
- scaleAlongXDirection() - Method in interface nxopen.features.ScaleCurveBuilder
-
Returns the scale along xdirection
License requirements: None.
- scaleAlongYDirection() - Method in interface nxopen.features.ScaleCurveBuilder
-
Returns the scale along ydirection
License requirements: None.
- scaleAlongZDirection() - Method in interface nxopen.features.ScaleCurveBuilder
-
Returns the scale along zdirection
License requirements: None.
- scaleBc(SimSolution, SimBC, double) - Method in interface nxopen.cae.SolutionManager
-
Set scale factor on bc in a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- scaleBc(SimSolutionStep, SimBC, double) - Method in interface nxopen.cae.StepManager
-
Set scale factor on bc in a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
- ScaleBuilder - Interface in nxopen.features
-
Represents a
Scale
builder.
- ScaleBuilder.Types - Class in nxopen.features
-
Scale type
- scaleCharacterHeightFactor() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the scale character height factor
License requirements: None.
- scaleCharacterHeightFactor() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the scale character height factor
License requirements: None.
- scaleCharacterHeightFactor() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the scale character height factor
License requirements: None.
- ScaleCurve - Interface in nxopen.features
-
Represents a scale curve feature
To create or edit an instance of this class, use
ScaleCurveBuilder
Created in NX11.0.0
- ScaleCurveBuilder - Interface in nxopen.features
-
- ScaleCurveBuilder.ScaleCurveType - Class in nxopen.features
-
Scale type
- ScaleData() - Constructor for class nxopen.drawings.DrawingSheet.ScaleData
-
- ScaleData() - Constructor for class nxopen.layout2d.ConvertLayoutToSheetBuilder.ScaleData
-
- scaleDenominator() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the denominator of a custom scale
License requirements: None.
- scaleDenominator() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the denominator of a custom scale
License requirements: None.
- scaleEnum() - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
Returns the scale enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- scaleExpression() - Method in interface nxopen.annotations.CustomSymbolData
-
- scaleExpression() - Method in interface nxopen.motion.LinkCouplerCoupleBuilder
-
Returns the scale expression
License requirements: mechanisms ("MECHANISMS")
.
- scaleFactor() - Method in interface nxopen.cae.ConvexMeshBuilder
-
- scalefactor - Variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.StaticLoadData
-
- scaleFactor() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the scale factor
License requirements: None.
- scaleFactor() - Method in interface nxopen.cae.PostAnnotationPreference
-
Returns the annotation scale factor
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- scaleFactor() - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
Returns the scale factor
License requirements: None.
- scaleFactor() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the scale factor
License requirements: None.
- scaleFactor() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the scale factor
License requirements: None.
- scaleFactor() - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
Returns the scale factor
License requirements: None.
- scaleFactor() - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
Returns the scale factor
License requirements: None.
- scaleFactor() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
Returns the scale factor.
- scaleFactor() - Method in interface nxopen.motion.PortAssociation
-
Returns the scale factor
License requirements: mechanisms ("MECHANISMS")
.
- scaleFactor() - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder
-
Returns the text scale size
License requirements: None.
- scaleFactor - Variable in class nxopen.uf.UFCurve.AskSplineSapData
-
- scaleFactor - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFactor - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- scaleFactorDistance - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFactorMax - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFactorMean - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFactorMin - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFactorNormal - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFactorSec - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFactorSlope - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFactorU - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFactorV - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- scaleFolder(SimSolution, SimLbcFolder, double) - Method in interface nxopen.cae.SolutionManager
-
Set scale factor on bc folder in a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- scaleFolder(SimSolutionStep, SimLbcFolder, double) - Method in interface nxopen.cae.StepManager
-
Set scale factor on bc folder in a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
- scaleFunction() - Method in interface nxopen.motion.LinkCouplerCoupleBuilder
-
Returns the scale spline curve
License requirements: mechanisms ("MECHANISMS")
.
- scaleGlobalBc(SimBC, double) - Method in interface nxopen.cae.StepManager
-
Set scale factor on bc in global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- scaleGlobalFolder(SimLbcFolder, double) - Method in interface nxopen.cae.StepManager
-
Set scale factor on bc folder in global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- scaleGlobalLoadset(SimLoadSet, double) - Method in interface nxopen.cae.StepManager
-
Set scale factor on loadset in global bc group in solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- scaleLabel() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the display of scale label.
- scaleLabel() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the scale label toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- scaleLabel - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- scaleLabelPrefix - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- scaleLimits() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the ScaleLimits
License requirements: None.
- scaleLimits() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the ScaleLimits
License requirements: None.
- scaleLoadset(SimSolution, SimLoadSet, double) - Method in interface nxopen.cae.SolutionManager
-
Set scale factor on loadset in a solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- scaleLoadset(SimSolutionStep, SimLoadSet, double) - Method in interface nxopen.cae.StepManager
-
Set scale factor on loadset in a step
License requirements: nx_masterfem ("Finite Element Modeling")
.
- scaleMaxLimitLabel() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the ScaleMaxLimitLabel
License requirements: None.
- scaleMaxLimitLabel() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the ScaleMaxLimitLabel
License requirements: None.
- scaleMinLimitLabel() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the ScaleMinLimitLabel
License requirements: None.
- scaleMinLimitLabel() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the ScaleMinLimitLabel
License requirements: None.
- scaleModified() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the scale modified attribute
License requirements: None.
- scaleNumerator() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the numerator of a custom scale
License requirements: None.
- scaleNumerator() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the numerator of a custom scale
License requirements: None.
- scaleOnFirstDrivingDimension() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not the entire active sketch is scaled
about the sketch origin when the first non-angular driving dimension is applied.
- scaleOrigin() - Method in interface nxopen.features.LocalScaleCurveBuilder
-
Returns the scale origin
License requirements: None.
- scaleOtherDirection() - Method in interface nxopen.features.ScaleBuilder
-
Returns the scale other direction
License requirements: None.
- scaleParameter - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Scale parameter
- scaleParentheses - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- scalePosition() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the scale position
License requirements: None.
- scalePosition() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the scale position
License requirements: None.
- scalePosition() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the scale position
License requirements: None.
- ScalePositionTypes - Class in nxopen.drawings
-
scale Position type
- scalePrefix() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the scale prefix
License requirements: None.
- scalePrefix() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the scale prefix
License requirements: None.
- scalePrefix() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the scale prefix
License requirements: None.
- scaleProfile() - Method in interface nxopen.motion.LinkCouplerCoupleBuilder
-
Returns the profile
License requirements: mechanisms ("MECHANISMS")
.
- SCALES - Static variable in class nxopen.motion.LinkCouplerBuilder.MethodChoices
-
Scales
- scaleSpeed() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
Returns the scale speed
License requirements: None.
- scaleStep() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
Returns the scale step
License requirements: None.
- scaleStepSize() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Returns the scaleStepSize
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- scaleStepSizeDouble() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Returns the clearance step size scale
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- scaleType() - Method in interface nxopen.drawings.ViewScaleBuilder
-
Returns the scale type
License requirements: None.
- scaleType - Variable in class nxopen.features.DeformDefinitionBuilder.JaDeformDefinitionExpData
-
- scaleType() - Method in interface nxopen.features.ScaleCurveBuilder
-
Returns the scale type
License requirements: None.
- scaleType() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the scaling type of curvature values.
- scaleType() - Method in interface nxopen.motion.LinkCouplerCoupleBuilder
-
Returns the scale type
License requirements: mechanisms ("MECHANISMS")
.
- scaleType - Variable in class nxopen.uf.UFModl.UdfsExp
-
- scaleValue - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- scaleValue - Variable in class nxopen.uf.UFDraw.AskViewParmScaleData
-
- scaleValue - Variable in class nxopen.uf.UFDraw.AskViewScaleData
-
- ScaleValueFormatTypes - Class in nxopen.drawings
-
scale value format type
- scaleX() - Method in interface nxopen.pid.EquipmentBuilder
-
Returns the x scale value.
- scaleX() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the x scale value.
- scaleXdirection() - Method in interface nxopen.features.ScaleBuilder
-
Returns the scale xdirection
License requirements: None.
- scaleY() - Method in interface nxopen.pid.EquipmentBuilder
-
Returns the y scale value.
- scaleY() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the y scale value.
- scaleYdirection() - Method in interface nxopen.features.ScaleBuilder
-
Returns the scale ydirection
License requirements: None.
- scaleZdirection() - Method in interface nxopen.features.ScaleBuilder
-
Returns the scale zdirection
License requirements: None.
- scaling - Variable in class nxopen.uf.UFModlFeatures.AskSweepData
-
- scaling(double[], double[]) - Method in interface nxopen.uf.UFMtx4
-
- SCALING_CURVE - Static variable in class nxopen.features.StyledSweepBuilder.ScalingMethodOptions
-
Scaling Curve
- scalingArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilder
-
- scalingArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the scaling arbitrary plane
License requirements: None.
- scalingArbitraryVector() - Method in interface nxopen.features.StudioXformBuilder
-
- scalingArbitraryVector() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the scaling arbitrary vector
License requirements: None.
- scalingCenter() - Method in interface nxopen.features.StudioXformBuilder
-
- scalingCenter() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the scaling center
License requirements: None.
- scalingCenterPoint() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the scaling center point
License requirements: None.
- scalingCurve() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the scaling curve
License requirements: None.
- scalingCurve() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
Returns the scaling curve.
- scalingDirection() - Method in interface nxopen.features.StudioXformBuilder
-
- scalingDirection() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the scaling direction
License requirements: None.
- scalingFactor - Variable in class nxopen.uf.UFSf.AskLvNxData
-
- scalingMethod() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the scaling method.
- scalingMethod() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the scaling method.
- scalingMethod() - Method in interface nxopen.features.SweptBuilder
-
Returns the scaling method.
- scalingMethod() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the scaling method
License requirements: None.
- scalingMethod() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the scaling method
License requirements: None.
- scalingMethod() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the scaling method
License requirements: None.
- ScalingMethodBuilder - Interface in nxopen.geometricutilities
-
- ScalingMethodBuilder.BlendingFunctionTypes - Class in nxopen.geometricutilities
-
This enum represents the blending function type, if the scaling by BlendingFunction is selected.
- ScalingMethodBuilder.ScalingOptions - Class in nxopen.geometricutilities
-
This enum represents the scaling method option.
- scalingMethodOption() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the scaling method option
License requirements: None.
- scalingOption() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
Returns the scaling method option.
- scalingPoint() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
Returns the scaling point.
- ScalingSetBuilder - Interface in nxopen.geometricutilities
-
- ScalingSetBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- scalingSetList() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the list of scaling sets
License requirements: None.
- scalingType() - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
Returns the scaling type
License requirements: None.
- scalingType() - Method in interface nxopen.display.DecalBuilder
-
Returns the scaling type
License requirements: None.
- scalingValue() - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
Returns the scaling value
License requirements: None.
- scalingValue() - Method in interface nxopen.geometricutilities.ScalingSetBuilder
-
Returns the scaling value expression
License requirements: None.
- SCALLOP - Static variable in class nxopen.cam.BladeCutLevels.DepthPerCutTypes
-
Scallop
- SCALLOP - Static variable in class nxopen.cam.DmRadBuilder.RadStepoverTypeType
-
Scallop
- SCALLOP - Static variable in class nxopen.cam.DPMItpBuilder.StepoverTypeOption
-
stepover scallop height
- SCALLOP - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Scallop
- scallopBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the scallop height
License requirements: None.
- scallopDistance() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the scallop distance
License requirements: None.
- scanCurveMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the scan curve mode
License requirements: None.
- scanForce() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the scan force
License requirements: None.
- scanModeType() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the 3,5 axis scan mode type
License requirements: None.
- scanModeType() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the 3,5 axis mode type
License requirements: None.
- scanModeType() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the 3,5 axis mode type
License requirements: None.
- scanModeType() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the 3,5 axis mode type
License requirements: None.
- scanPhysicsObject(Component) - Method in interface nxopen.mechatronics.ReplacePhysicsBuilder
-
Scans physics objects in context
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- scanSpeed() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the scan speed
License requirements: None.
- scanSpeed() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the builder for scan speed
License requirements: None.
- scanSpeed() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the builder for scan speed
License requirements: None.
- scanSpeed() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the builder for scan speed
License requirements: None.
- scanSpeed() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the builder for scan speed
License requirements: None.
- scanSpeed() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the builder for scan speed
License requirements: None.
- SCANTLING - Static variable in class nxopen.features.shipdesign.SeamBuilder.Types
-
Scantling seam, will allow for changing stock across the seam.
- SCANTLING_SEAM - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Scantling Seam type
- scantlingSplitSystem() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the indication if the scantling seams should split the system by default.
- scatter() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the option to determine whether to scatter design elements during creation
License requirements: None.
- SCATTER - Static variable in class nxopen.cae.xyplot.GraphStyle
-
Option to display plot in scatter style
- scattering - Variable in class nxopen.uf.UFView.LightAttributes
-
- ScatterStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the scatter display style.
- scCollector() - Method in interface nxopen.cam.GeometrySet
-
Returns the sc collector
License requirements: None.
- ScCollector - Interface in nxopen
-
Represents a collector
ScCollector consists of collection of either faces, bodies, edges, curves or a mixed collection of these entities.
- ScCollectorCollection - Interface in nxopen
-
This class contains the factory methods for creating a sc collector.
- ScCollectorList - Interface in nxopen
-
Represents a list of objects.
- scCollectors() - Method in interface nxopen.BasePart
-
Returns the ScCollectorCollection instance belonging to this part .
- scenarioDescriptor() - Method in interface nxopen.cae.PostScenarioParameters
-
Returns the scenario descriptor used by the post scenario.
- scenarioName() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the name of the scenario model containing the suspension template.
- scenarioNames - Variable in class nxopen.uf.UFSf.LocateScenariosData
-
- Scene - Interface in nxopen.display
-
Represents a
Scene
A scene is comprised of background, stage, reflection, lights and
image-based lighting subobjects.
- SCENE - Static variable in class nxopen.LightType
-
A scene lights is a light whose parameters, except for
intensity, are fixed.
- SCENE_IMAGES - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.Types
-
Scene image.
- sceneImageOption() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
Returns the scene image option.
- sceneLightType - Variable in class nxopen.Light.LightTypeData
-
is light_type is ...scene,
this is the specific type of
scene light
- sceneName() - Method in interface nxopen.display.ExtractScene
-
Returns the scene name
License requirements: None.
- ScEvaluationFiltertype - Class in nxopen
-
Tokens used to create different evaluation filters on ScCollector
- SchematicSymbol - Interface in nxopen.ame
-
Represents a Schematic Symbol object
This object does not need a creator.
- SchematicSymbolConfigurationBuilder - Interface in nxopen.ame
-
- scheme() - Method in interface nxopen.geometricutilities.ConvertFeatureGroupsToDesignGroupsBuilder
-
Returns the Conversion Scheme for Feature Group to Design Group conversion
License requirements: None.
- SCIENTIFIC - Static variable in class nxopen.cae.NumberFormat.FormatOption
-
Format the number in scientific
- SCIENTIFIC - Static variable in class nxopen.cae.Post.Format
-
- SCL - Static variable in class nxopen.ame.ProgrammingLanguage
-
- SCO - Static variable in class nxopen.cae.CorrelShapemetrictype
-
Shape metric type is SEREP-Cross-Orthogonality
- sControlName - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentAssemblyBuilder.UpdatedControlData
-
- sControlName - Variable in class nxopen.linedesigner.FactoryCadGeoEquipmentBuilder.UpdatedControlData
-
- scop() - Method in interface nxopen.UFSession
-
- scope() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the scope
License requirements: None.
- scope() - Method in interface nxopen.annotations.TableColumnBuilder
-
Returns the scope enum specifies whether settings are to be applied to all
cells of column or only cells of new rows in column.
- scope() - Method in interface nxopen.features.shipdesign.ShipFeatureConverter
-
Returns the conversion scope
License requirements: None.
- scopeEnum() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the scope of the Link PMI function
License requirements: None.
- scopeType() - Method in interface nxopen.visualreporting.VisualReport
-
- scopeTypeOfVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- SCOPR_NCM_CHANGE_LINEAR_NORMAL_TO_PART - Static variable in class nxopen.cam.CAMObject.Attr
-
- SCOUTExportBuilder - Interface in nxopen.mechatronics
-
- SCOUTExportBuilder.ExportFileType - Class in nxopen.mechatronics
-
Represents the export file type.
- SCOUTImportBuilder - Interface in nxopen.mechatronics
-
- SCRAP - Static variable in class nxopen.tooling.ScrapDesignBuilder.RemoveType
-
Captures normal scraps
- SCRAP_AREA - Static variable in class nxopen.die.FillAreaBuilder.Types
-
Remove the volume instead of filling.
- scrapDesign() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ScrapDesignCollection instance belonging to this part .
- ScrapDesignBuilder - Interface in nxopen.tooling
-
- ScrapDesignBuilder.AddonType - Class in nxopen.tooling
-
Specifies the add-on type
- ScrapDesignBuilder.Body - Class in nxopen.tooling
-
Specifies the operation type of scraps
- ScrapDesignBuilder.DefScrapType - Class in nxopen.tooling
-
Specifies the definition type of scraps
- ScrapDesignBuilder.EditScrapType - Class in nxopen.tooling
-
Specifies the edit type of scraps
- ScrapDesignBuilder.OvercutType - Class in nxopen.tooling
-
Specifies the over cut type, different type has different parameters
- ScrapDesignBuilder.RemoveType - Class in nxopen.tooling
-
Specifies the removing type as filter
- ScrapDesignBuilder.ScrapDefPosition - Class in nxopen.tooling
-
Specifies the position method of scraps, projecting method is normally used
- ScrapDesignBuilder.ScrapDefType - Class in nxopen.tooling
-
Specifies the creation type of scraps
- ScrapDesignBuilder.TrimNumType - Class in nxopen.tooling
-
Specifies the step of trimming process, the maximum is five
- ScrapDesignCollection - Interface in nxopen.tooling
-
Represents a collection of ScrapDesign
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- scrapMethod() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the scrap method, which includes boundary+sketch, hole boundary, close curves, boundary lines and existed sheet body
License requirements: None.
- scrapPosition() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the scrap position
License requirements: None.
- scrapTol() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the scrap tolerance, when fail to create scrap in some cases, this value can be decreased to try again
License requirements: None.
- scrapTypeEnum() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the scrap type enum
License requirements: None.
- SCREEN - Static variable in class nxopen.annotations.LeaderAttachment
-
- SCREEN_DISTANCE - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- SCREEN_POINT - Static variable in class nxopen.routing.SegmentManager.SubdivideSpacing
-
Screen Point
- SCREEN_POINTS - Static variable in class nxopen.MeasureAngleBuilder.AngleType
-
- SCREEN_POSITION - Static variable in class nxopen.annotations.AssociativityPointOption
-
Screen position
- SCREEN_POSITION_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- SCREEN_SIZE_FIT - Static variable in class nxopen.uf.UFDisp.Context
-
- SCREEN_SIZE_FIT - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Fit operation for screen-size geometry
- screenPointPercentage - Variable in class nxopen.routing.SegmentManager.SubdivideOption
-
Screen Point Percentage
- screenPosition - Variable in class nxopen.Selection.SelectScreenPositionData
-
Selected screen position
- screenTextSize() - Method in interface nxopen.display.TransientText
-
Returns the approximate size of the text (small, mendium, large) as measured on
the graphics screen.
- screenVisualization() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing Visualization preferences settings for screen tab applicable to displayed part .
- screenVisualization() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Visualization Screen preferences settings applicable to entire session .
- SCREW - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type is used to couple the
rotation and translation of a cylindrical
joint to remove one degree of freedom.
- SCREW - Static variable in class nxopen.positioning.Constraint.Type
-
For internal use only
- SCREW - Static variable in class nxopen.tooling.FastenerAssy.StackTypeMethod
-
Screw type
- SCREW_CLEARANCE - Static variable in class nxopen.geometricutilities.EndHoleData.FormOptions
-
Screw clearance
- SCREW_CLEARANCE_HOLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype
-
- SCREW_CLEARANCE_HOLE - Static variable in class nxopen.features.HolePackageBuilder.Types
-
Screw clearance hole
- SCREW_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
-
- SCREW_JOINT_OR_SPRING_INITIAL_CONDITION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- SCREW_SIZE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- screwCheck() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the screw check, to specify if screw check algorithm needs to be used
License requirements: None.
- screwClearanceCounterboreDepth() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the counter bore depth - this is applicable for screw clearence hole
License requirements: None.
- screwClearanceCounterboreDiameter() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the counter bore diameter - this is applicable for screw clearence hole
License requirements: None.
- screwClearanceCountersinkAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the counter sink angle - this is applicable for screw clearence hole
License requirements: None.
- screwClearanceCountersinkDiameter() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the counter sink diameter - this is applicable for screw clearence hole
License requirements: None.
- screwClearanceEndChamferAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the screw clearance end chamfer angle - this is applicable for screw clearance hole type
License requirements: None.
- screwClearanceEndChamferAngle() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the screw clearance end chamfer angle
License requirements: None.
- screwClearanceEndChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the end chamfer enabled - this is applicable for screw clearance hole type
License requirements: None.
- screwClearanceEndChamferEnabled() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the screw clearance end chamfer enabled
License requirements: None.
- screwClearanceEndChamferOffset() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the screw clearance end chamfer offset - this is applicable for screw clearance hole type
License requirements: None.
- screwClearanceEndChamferOffset() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the screw clearance end chamfer offset
License requirements: None.
- screwClearanceHoleDepth() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole depth - this is applicable for screw clearance hole
License requirements: None.
- screwClearanceHoleDiameter() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole diameter - this is applicable for screw clearence hole
License requirements: None.
- screwClearanceHoleForm() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole form - this is applicable for screw clearance hole
License requirements: None.
- screwClearanceNeckChamferAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the neck chamfer angle - this is applicable for screw clearence hole type
with counterbore hole form
License requirements: None.
- screwClearanceNeckChamferOffset() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the neck chamfer offset - this is applicable for screw clearence hole type
with counterbore hole form
License requirements: None.
- screwClearanceReliefDepth() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the relief depth - this is applicable for screw clearence hole type
License requirements: None.
- screwClearanceReliefEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the relief enabled - this is applicable for screw clearence hole type with
countersunk hole form and threaded hole type
License requirements: None.
- screwClearanceStartChamferAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the screw clearance start chamfer angle - this is applicable for screw clearance hole type
License requirements: None.
- screwClearanceStartChamferAngle() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the screw clearance start chamfer angle
License requirements: None.
- screwClearanceStartChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the screw clearance start chamfer enabled - this is applicable for screw clearance hole type
License requirements: None.
- screwClearanceStartChamferEnabled() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the screw clearance start chamfer enabled
License requirements: None.
- screwClearanceStartChamferOffset() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the screw clearance start chamfer offset - this is applicable for screw clearance hole type
License requirements: None.
- screwClearanceStartChamferOffset() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the screw clearance start chamfer offset
License requirements: None.
- screwClearanceTipAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the tip angle - this is applicable for screw clearance hole
License requirements: None.
- screwDiameter() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the screw diameter
License requirements: None.
- screwDisplCurveFunction() - Method in interface nxopen.motion.JointDefine
-
Returns the displacement curve function tag.
- screwDisplCurveProfile() - Method in interface nxopen.motion.JointDefine
-
Returns the displacement curve Profile.
- screwFitOption() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the screw fit Option - this is applicable for screw clearence hole
License requirements: None.
- ScrewJoint - Interface in nxopen.mechatronics
-
Represents the Screw Joint.
- ScrewJointBuilder - Interface in nxopen.mechatronics
-
- ScrewJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Screw Joint.
- screwJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- screwRatio - Variable in class nxopen.uf.UFMotion.Joint
-
- screwRatioExpression() - Method in interface nxopen.motion.JointDefine
-
Returns the screw ratio expression.
- screwRatioProfile() - Method in interface nxopen.motion.JointDefine
-
Returns the ratio Profile.
- screwSize() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the screw size - this is applicable for screw clearence hole
License requirements: None.
- screwSize() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the screw size
License requirements: None.
- screwSizeText() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the screwSize text
License requirements: None.
- screwSizeTextType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the ScrewSize setting
License requirements: None.
- screwSplineFunction() - Method in interface nxopen.motion.JointDefine
-
Returns the spline function tag.
- screwStandard() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the screw standard - this is applicable for screw clearence hole type
License requirements: None.
- screwType() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the screw type - this is applicable for screw clearence hole
License requirements: None.
- screwType() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the screw type
License requirements: None.
- script() - Method in interface nxopen.features.TextBuilder
-
Returns the script
License requirements: None.
- scrollAreaSize() - Method in interface nxopen.cam.Preferences
-
Returns the scrollable items
License requirements: None.
- SCROLLED_WINDOW - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- SCROLLED_WINDOW - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Scrolled Window item
- ScrolledWindow - Interface in nxopen.blockstyler
-
Represents a Scrolled Window block .
- ScrolledWindow - Interface in nxopen.uistyler
-
Represents a ScrolledWindow for UI Styler .
- scrollFrozenColumn() - Method in interface nxopen.blockstyler.Tree
-
Returns the ScrollFrozenColumn.
- scrollLineNumber() - Method in interface nxopen.blockstyler.Tree
-
Returns the ScrollLineNumber.
- scrollTo(int, Node.Scroll) - Method in interface nxopen.blockstyler.Node
-
Scrolls horizontally and vertically to make the specific column of
node appear on the tree window.
- sCross - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
-
- sCross - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
-
- scRuleFactory() - Method in interface nxopen.Part
-
Returns the ScRuleFactory instance belonging to this part .
- ScRuleFactory - Interface in nxopen
-
This class contains the factory methods for creating selection intent rules
To obtain an instance of this class, refer to
Part
Created in NX3.0.0
- SCUD_UPDOWN_CUT - Static variable in class nxopen.cam.ToolpathEventType
-
- sCurve - Variable in class nxopen.uf.UFModl.MethodList
-
- sdimension() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the dimension expression for S dimension
License requirements: None.
- SDV - Static variable in class nxopen.cae.Result.Quantity
-
- SDV_ELEMENT_INTEGRATION_POINT - Static variable in class nxopen.cae.Result.Quantity
-
- SE_PART_ASM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- SEALER_BEAD_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SEALER_FILL_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SEALING - Static variable in class nxopen.cae.connections.ConnectionType
-
Sealing
- Sealing - Interface in nxopen.cae.connections
-
Sealing connection.
- SEAM - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- SEAM - Static variable in class nxopen.annotations.Symbol
-
Specfies seam weld symbol
- Seam - Interface in nxopen.features.shipdesign
-
Represents a ship design seam feature.
- SEAM - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- SEAM2 - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- SEAM2 - Static variable in class nxopen.annotations.Symbol
-
Specfies seam2 weld symbol
- SEAM_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- SEAM_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- SEAM_WELD - Static variable in class nxopen.cae.connections.ComposerConnectionType
-
SeamWeld
- SEAM_WELD - Static variable in class nxopen.cae.connections.ConnectionType
-
Seam Weld
- SEAM_WELD - Static variable in class nxopen.uf.UFConstants
-
- SEAM_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- SeamBlockBuilder - Interface in nxopen.features.shipdesign
-
- SeamBlockBuilder.SeamType - Class in nxopen.features.shipdesign
-
this specifies seam type option
- SeamBlockBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- SeamBuilder - Interface in nxopen.features.shipdesign
-
- SeamBuilder.DefinitionMethods - Class in nxopen.features.shipdesign
-
Used to indicate the method being used to define the seam locations.
- SeamBuilder.StaggerShiftAlongMethods - Class in nxopen.features.shipdesign
-
Used to indicate the method being used to define which direction the seam stagger will shift along.
- SeamBuilder.Types - Class in nxopen.features.shipdesign
-
Used to indicate the type of seam that is being created.
- seamCurve() - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilder
-
Returns the seam curve to resize the corner cut.
- seamingObjects() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the objects that define straking seams
License requirements: None.
- seamOption() - Method in interface nxopen.features.shipdesign.SeamBlockBuilder
-
Returns the seam option
License requirements: None.
- seams() - Method in interface nxopen.features.shipdesign.DeleteSeamBuilder
-
Returns the seams to delete from the ship structural components
License requirements: None.
- seams() - Method in interface nxopen.features.shipdesign.EditWeldingBuilder
-
Returns the objects to change the welding characteristics
License requirements: None.
- seams() - Method in interface nxopen.features.shipdesign.SubSystemsBuilder
-
Returns the seams that you want to actually split the plate system or profile system.
- seamSelection() - Method in interface nxopen.features.shipdesign.SeamBlockBuilder
-
Returns the seam selection
License requirements: None.
- SeamWeld - Interface in nxopen.cae.connections
-
Seam Weld connection.
- SeamWeldMaterialType - Class in nxopen.cae.connections
-
Seam Weld Material type
- seamWeldType() - Method in interface nxopen.cae.connections.SeamWeld
-
Returns the seam weld type
License requirements: None.
- SeamWeldType - Class in nxopen.cae.connections
-
Seam Weld Type
- SEARCH - Static variable in class nxopen.routing.ControlPointCollection.CheckExisting
-
Search for an existing object, don't
create a new object if one exists at the
correct location.
- SEARCH_DIRECTORIES - Static variable in class nxopen.LoadOptions.LoadMethod
-
use a list of search directories
- searchattributes - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetPostPlacementRulesData
-
Search Attribute Titles.
- searchBoundaryBodies() - Method in interface nxopen.tooling.ChannelFittingBuilder
-
Returns the value which specifies whether to auto search boundary bodies or not.
- searchByProductSelection() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
Returns the search by specific product selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- searchConeAngle() - Method in interface nxopen.cae.connections.INodalTargetsPairing
-
Returns the search cone angle
License requirements: None.
- SearchCriteria() - Constructor for class nxopen.routing.RouteManager.SearchCriteria
-
- SearchCriteria(RouteManager.FindObjectType, HarnessDevice, String, String) - Constructor for class nxopen.routing.RouteManager.SearchCriteria
-
Constructor for the SearchCriteria object.
- SearchCriteriaCalloutBuilder - Interface in nxopen.annotations
-
Represents SearchCriteriaCalloutBuilder
This is a sub-builder class and cannot be directly instantiated
.
- SearchCriteriaCalloutBuilder.CalloutTypes - Class in nxopen.annotations
-
CalloutTypes
- SearchCriteriaDatumFeatureSymbolBuilder - Interface in nxopen.annotations
-
- SearchCriteriaDatumTargetBuilder - Interface in nxopen.annotations
-
- SearchCriteriaDatumTargetBuilder.DatumTargetMovableOptions - Class in nxopen.annotations
-
Represents the search pmi movable datum target type
- SearchCriteriaDatumTargetBuilder.DatumTargetTypes - Class in nxopen.annotations
-
Lists the search pmi datum target type
- SearchCriteriaDimensionBuilder - Interface in nxopen.annotations
-
- SearchCriteriaDimensionBuilder.DiameterSymbolOptions - Class in nxopen.annotations
-
Specifies diameter symbol option
- SearchCriteriaDimensionBuilder.DimensionTypes - Class in nxopen.annotations
-
Specifies dimension types
- SearchCriteriaDimensionBuilder.MeasurementTypes - Class in nxopen.annotations
-
Specifies measurement types
- SearchCriteriaDimensionBuilder.RadialSymbolOptions - Class in nxopen.annotations
-
Specifies radial symbol option
- SearchCriteriaDimensionBuilder.ToleranceTypes - Class in nxopen.annotations
-
Specifies tolerance types
- SearchCriteriaFeatureControlFrameBuilder - Interface in nxopen.annotations
-
- SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions - Class in nxopen.annotations
-
Lists the search pmi feature control frame type
- SearchCriteriaFeatureControlFrameBuilder.CircleUOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame circleU
- SearchCriteriaFeatureControlFrameBuilder.CollectionPlaneOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame collection plane indicator
- SearchCriteriaFeatureControlFrameBuilder.DirectionFeatureOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame direction feature indicator
- SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions - Class in nxopen.annotations
-
Lists the search pmi feature control frame style
- SearchCriteriaFeatureControlFrameBuilder.FreeStateOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame free state
- SearchCriteriaFeatureControlFrameBuilder.IndicatorOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame indicator
- SearchCriteriaFeatureControlFrameBuilder.IntersectionPlaneOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame intersection plane indicator
- SearchCriteriaFeatureControlFrameBuilder.OrientationPlaneOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame orientation plane indicator
- SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions - Class in nxopen.annotations
-
Lists the type of pmi feature control frame primary datum dual MCM
- SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions - Class in nxopen.annotations
-
Lists the type of pmi feature control frame primary datum MCM
- SearchCriteriaFeatureControlFrameBuilder.ProjectedOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame projected
- SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions - Class in nxopen.annotations
-
Lists the type of pmi feature control frame secondary datum dual MCM
- SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions - Class in nxopen.annotations
-
Lists the type of pmi feature control frame secondary datum MCM
- SearchCriteriaFeatureControlFrameBuilder.StatisticalOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame statistical
- SearchCriteriaFeatureControlFrameBuilder.TangentPlaneOptions - Class in nxopen.annotations
-
Lists the status of pmi feature control frame tangent plane
- SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions - Class in nxopen.annotations
-
Lists the type of pmi feature control frame tertiary datum dual MCM
- SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions - Class in nxopen.annotations
-
Lists the type of pmi feature control frame tertiary datum MCM
- SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions - Class in nxopen.annotations
-
Lists the type of pmi feature control frame tolerance MCM
- SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions - Class in nxopen.annotations
-
Lists the type of pmi feature control frame zone shape
- SearchCriteriaPMINotesBuilder - Interface in nxopen.annotations
-
- SearchCriteriaSurfaceFinishBuilder - Interface in nxopen.annotations
-
- SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes - Class in nxopen.annotations
-
Lists the search pmi surface finish type
- SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions - Class in nxopen.annotations
-
Lists the Tolerance type of surface finish value
- SearchDatumsBuilder - Interface in nxopen.tooldesigner
-
SearchDatumsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSearchDatumsBuilder
Created in NX10.0.0
- searchDatumsInStationByProperty(SelectDatumsBuilder.Type, String) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
Search for a station by property and gets its assigned datums
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- SearchDesignesBuilder - Interface in nxopen.tooldesigner
-
SearchDesignesBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSearchDesignesBuilder
Created in NX10.0.0
- searchDirectories - Variable in class nxopen.LoadOptions.SearchDirectoriesData
-
True indicates that sub-directories will be searched as well
- SearchDirectoriesData() - Constructor for class nxopen.LoadOptions.SearchDirectoriesData
-
- searchDirectoryList() - Method in interface nxopen.Catiav5Importer
-
Returns the serach directory list - This option allows you to specify a semicolon separated list of
directories in which the translator can find components of an assembly.
- searchDist() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the search distance
License requirements: None.
- searchDistance() - Method in interface nxopen.cae.EdgeSticherBuilder
-
Returns the search distance value to check overlap
License requirements: None.
- searchDistance() - Method in interface nxopen.cae.ImprintBuilder
-
Returns the search distance
License requirements: None.
- searchDistance() - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
Returns the search distance used to localize each FEM element in the FiberSIM zone mesh
License requirements: None.
- searchDistance() - Method in interface nxopen.cae.WeldBuilder
-
Returns the distance within which to search for PIDs
License requirements: None.
- searchDistance() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the search distance to be used when searching for side 2 faces
License requirements: None.
- searchExistingInterPartExpressionOnly() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the option to search existing inter part expression only or all expressions including regular ones.
- searchForReplacementForObject(NXObject) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The method that initiates a search for the replacement object
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- searchForReplacementForObjectOnAttributes(NXObject, RoutingAttributeIdentifierType[], String[]) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The method that initiates a search for the replacement object using on the passed in attributes as criteria
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- searchingDestinationObject() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the searching destination object string.
- searchingSourceObject() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the searching source object string.
- searchingSourcePart() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the searching source part string.
- searchingSourcePartAttribute() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the searching source part attribute string.
- SearchManager - Interface in nxopen.shapesearch
-
This class manages Shape Search.
- SearchModelView - Interface in nxopen.annotations
-
Represents a search model view
To create or edit an instance of this class, use
SearchModelViewBuilder
Created in NX7.5.0
- SearchModelViewBuilder - Interface in nxopen.annotations
-
- SearchModelViewBuilder.PmiTypes - Class in nxopen.annotations
-
the search criteria pmitype
- SearchModelViewBuilder.SearchScopeOptions - Class in nxopen.annotations
-
seaerch scope type
- SearchModelViewBuilder.TextComparisionOptions - Class in nxopen.annotations
-
Represents the text comparision options
- SearchModelViewBuilder.ValueComparisionOptions - Class in nxopen.annotations
-
Represents the value comparision options
- SearchModelViewCollection - Interface in nxopen.annotations
-
- searchModelViews() - Method in interface nxopen.annotations.PmiManager
-
PMI search view collection .
- searchOrientation() - Method in interface nxopen.cae.connections.INodalTargetsPairing
-
Returns the pairing search orientation
License requirements: None.
- searchRange() - Method in interface nxopen.cae.connections.INodalTargetsPairing
-
Returns the search range
License requirements: None.
- searchRecords(String) - Method in interface nxopen.tooling.SpreadsheetData
-
Search the spreadsheet by the given conditions.
- searchRegionButton() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Button to invoke searching region
License requirements: None.
- searchResolution() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the search resolution.
- searchResolution() - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
Returns the search resolution.
- SearchResult - Interface in nxopen.pdm
-
Represents search query .
- SearchResultCollection - Interface in nxopen.assemblies
-
- searchResultElement() - Method in interface nxopen.assemblies.ExplicitSearchTerm
-
Returns the search result element of this search term.
- SearchResultElement - Interface in nxopen.assemblies
-
A search result element can be produced as the result of a search performed in the context of a
SubsetBuilder
.
- searchResults() - Method in interface nxopen.assemblies.SubsetBuilder
-
- searchScope() - Method in interface nxopen.annotations.SearchModelViewBuilder
-
Returns the search scope
License requirements: None.
- searchShapeSimilarity() - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
Returns the shape similarity to be set for search
License requirements: shape_search ("Shape Search")
.
- searchShapeSize() - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
Returns the shape size to be set for search.
- searchSubDirs - Variable in class nxopen.LoadOptions.SearchDirectoriesData
-
- searchTemplateFromSiteDirectory() - Method in interface nxopen.report.ReportPreference
-
Returns the option indicates whether to use site template directory as start to choose a report template file
License requirements: None.
- SearchTerm - Interface in nxopen.assemblies
-
A search term is used to specify a search for the contents of a
Subset
.
- SearchTerm.SearchTermLogicType - Class in nxopen.assemblies
-
Logic used to determine how a search term is used within a recipe.
- SearchTermBuilder - Interface in nxopen.assemblies
-
A SearchTermBuilder is used to create or edit an
SearchTerm
.
- searchTermLogic() - Method in interface nxopen.assemblies.AttributeSearchTermBuilder
-
Returns the search term logic.
- searchTermLogic() - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
Returns
the search term logic.
- searchTermLogic() - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
Returns
the search term logic.
- searchTermLogic() - Method in interface nxopen.assemblies.ProximitySearchTermBuilder
-
Returns
the search term logic.
- searchTermLogic() - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder
-
Returns
the search term logic.
- searchType() - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
Returns the search type
License requirements: shape_search ("Shape Search")
.
- searchType1() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the search type1
License requirements: None.
- searchType2() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the search type2
License requirements: None.
- searchTypes() - Method in interface nxopen.tooldesigner.AssociateDatumsUnitDesignsBuilder
-
Returns the enum0
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- searchTypes() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
Returns the SearchOptions
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- searchTypes() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
Returns the SearchTypes
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- searchValue() - Method in interface nxopen.tooldesigner.AssociateDatumsUnitDesignsBuilder
-
Returns the string0
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- searchValue() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
Returns the SearchValue
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- searchWavelinksInterpartExpressions() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Searches WAVE links and interpart expressions.
- seat() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the seat type: fixed seat or adjustable seat
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- SEAT_ASSEMBLY - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.AnchorageLocationTypes
-
seat assembly
- seatAngleExp() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the passenger's seat angle.
- SeatBeltAnchorage - Interface in nxopen.features.vehicledesign
-
Represents a seat belt anchorage feature
To create or edit an instance of this class, use
SeatBeltAnchorageBuilder
Created in NX6.0.0
- SeatBeltAnchorageBuilder - Interface in nxopen.features.vehicledesign
-
- SeatBeltAnchorageBuilder.AnchorageLocationTypes - Class in nxopen.features.vehicledesign
-
the seat belt anchorage location type
- SeatBeltAnchorageBuilder.ATLType - Class in nxopen.features.vehicledesign
-
the show ATL type
- SeatBeltAnchorageBuilder.LOneLimitType - Class in nxopen.features.vehicledesign
-
the lone limit type
- SeatBeltAnchorageBuilder.LowerAreaType - Class in nxopen.features.vehicledesign
-
the lower area type
- SeatBeltAnchorageBuilder.LowerLimitType - Class in nxopen.features.vehicledesign
-
the lower limit type
- SeatBeltAnchorageBuilder.LTwoLimitType - Class in nxopen.features.vehicledesign
-
the ltwo limit type
- SeatBeltAnchorageBuilder.RoutingTypes - Class in nxopen.features.vehicledesign
-
the seat belt routing type
- SeatBeltAnchorageBuilder.SeatPositionTypes - Class in nxopen.features.vehicledesign
-
the seat position type
- SeatBeltAnchorageBuilder.SeatTypes - Class in nxopen.features.vehicledesign
-
the seat type
- SeatBeltAnchorageBuilder.StandardTypes - Class in nxopen.features.vehicledesign
-
the standard type
- SeatBeltAnchorageBuilder.UpperAreaType - Class in nxopen.features.vehicledesign
-
the upper area type
- seatDirection() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the direction that this passenger is facing.
- seatPosition() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the seat position type
License requirements: None.
- seatReferencePoint() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the seat reference point(SgRP).
- seatReferencePoint() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the driver seat reference point.
- seatReferencePoint() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the passenger's seat reference point.
- seatReferencePointActive() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the status to indicate whether the driver seat reference point is active or not.
- seatReferencePointActive() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
Returns the status to indicate whether the passenger seat reference point is active or not.
- seatTrackAngleA19() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the track angle A19 of seat data, it should be set for Class A driver, Class A front passenger
and Class B driver
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- seatType() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the seat type
License requirements: None.
- secantModulus(double, double, double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Secant modulus
Computes the secant modulus from material properties and stress.
- SecantModulusData() - Constructor for class nxopen.cae.aerostructures.author.ABB.SecantModulusData
-
- secDatLetter() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the sec dat letter
License requirements: None.
- secdir - Variable in class nxopen.uf.UFSo.DirrOnSurfData
-
- secdir - Variable in class nxopen.uf.UFSo.OffsetSurfCvtrData
-
- secDirection() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the sec direction
License requirements: None.
- SECOND - Static variable in class nxopen.annotations.ArrowDisplay
-
Displays arrow to the second object selected to create
the dimension
- SECOND - Static variable in class nxopen.annotations.ExtensionLineDisplay
-
Displays extension line attached to the
second object selected to create the dimension
- SECOND - Static variable in class nxopen.facet.SewFacetBodyBuilder.VertexIndex
-
Index of the second vertex
- SECOND - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx.SphereSubdivisionLevel
-
- SECOND - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
-
Second wrap around distance line
- SECOND - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextFontType
-
- SECOND - Static variable in class nxopen.tooling.BurringInsertBuilder.BurringPunchTypes
-
use second type
- SECOND - Static variable in class nxopen.tooling.HoleDatumSymbolBuilder.SymbolType
-
- second - Variable in class nxopen.uf.UFPs.KernelVersion
-
- SECOND - Static variable in class nxopen.weld.JointExitBuilder.BodySide
-
the other side.
- SECOND - Static variable in class nxopen.weld.WeldFacesetIndex
-
second face set
- SECOND - Static variable in class nxopen.weld.WeldGroupIdColor
-
Second Group Id Color Index
- SECOND_AND_THIRD_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
Only second and third point use arclength
- SECOND_AXIS - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CoordinateSysAxis
-
- SECOND_LINK - Static variable in class nxopen.uf.UFMotion.ReferenceFrame
-
- SECOND_POINT - Static variable in class nxopen.features.DatumAxisBuilder.UseArcLength
-
Only second point uses arclength
- SECOND_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
Only second point uses arclength
- SECOND_RUN - Static variable in class nxopen.routing.IntegrateRunsBuilder.Enum
-
- SECOND_SET - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Frame
-
Interference solids positioned relative to
interfering links in second set.
- SECOND_STRETCH_WALL - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Update second stretch wall segment.
- secondAdoptionCurve() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the second adoption curve.
- secondArrowheadCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- secondArrowheadColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second arrowhead color
License requirements: None.
- secondArrowheadFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second arrowhead font
License requirements: None.
- secondArrowheadWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second arrowhead width
License requirements: None.
- secondArrowLineCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- secondArrowLineColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second arrow line color
License requirements: None.
- secondArrowLineFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second arrow line font
License requirements: None.
- secondArrowLineWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second arrow line width
License requirements: None.
- secondArrowType() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the second arrow type
License requirements: None.
- secondArrowType() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second arrowhead type
License requirements: None.
- secondArrowType - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- SECONDARY - Static variable in class nxopen.display.DynamicSectionTypes.ActivePlane
-
Secondary
- SECONDARY - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerTabType
-
secondary tab
- secondary() - Method in interface nxopen.mechatronics.GanttLinkerBuilder
-
Returns the accessor for second operation object which is going to be linked
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- secondary - Variable in class nxopen.uf.UFGdt.DrfData
-
- secondary1() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the direction of the stiffener flange.
- secondary1OnReference() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the direction of the stiffener flange when the stiffener is located on a midship reference.
- secondary2() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the direction of the stiffener flange.
- secondary2OnReference() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the direction of the stiffener flange when the stiffener is located on a midship reference.
- SECONDARY_EXTENSION - Static variable in class nxopen.annotations.LineComponent.LineType
-
secondary extension
- SECONDARY_GEOMETRY - Static variable in class nxopen.drawings.DraftingComponentSelectionBuilder.Geometry
-
indicates the component objects are to be rendered with Secondary geometry color/font/width
- SECONDARY_HIDDEN_NONSECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Secondary, Hidden, NonSection
- SECONDARY_HIDDEN_NONSECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Secondary, Hidden, NonSection
- SECONDARY_HIDDEN_SECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Secondary, Hidden, Section
- SECONDARY_HIDDEN_SECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Secondary, Hidden, Section
- SECONDARY_INDEXING_INLINE - Static variable in class nxopen.uf.UFDraw.SecondaryIndexingAlign
-
- SECONDARY_INDEXING_SUBSCRIPT - Static variable in class nxopen.uf.UFDraw.SecondaryIndexingAlign
-
- SECONDARY_PARTS - Static variable in class nxopen.weld.WeldBeadBuilder.BeadLocationMethod
-
on the secondary parts
- SECONDARY_VISIBLE_NONSECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Secondary, Visible, NonSection
- SECONDARY_VISIBLE_NONSECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Secondary, Visible, NonSection
- SECONDARY_VISIBLE_SECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines
-
Secondary, Visible, Section
- SECONDARY_VISIBLE_SECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines
-
Secondary, Visible, Section
- secondaryAlignment() - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder
-
Returns the secondary alignment
License requirements: None.
- secondaryCalloutActive() - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
Returns the activation of hole callout secondary dimension
License requirements: None.
- secondaryComponent() - Method in interface nxopen.drawings.DrawingsPropertiesBuilder
-
Returns the secondary geometry state.
- secondaryComponents() - Method in interface nxopen.drawings.BaseViewBuilder
-
Returns the list of secondary objects in the view
License requirements: None.
- secondaryComponents() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns the list of secondary components in the view
License requirements: None.
- secondaryComponents() - Method in interface nxopen.drawings.ProjectedViewBuilder
-
Returns the list of secondary components in the view
License requirements: None.
- secondaryComponents() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the list of secondary objects in the view
License requirements: None.
- secondaryComponents() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the list of secondary objects in the view
License requirements: None.
- secondaryComponents() - Method in interface nxopen.drawings.ViewStyleBuilder
-
Returns the secondary components style builder of the view style builder which represents the secondary geometry tab on the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- secondaryComponentsCFW() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
Returns the visible and hidden lines color, font, and width of secondary geometry.
- secondaryCompoundDatumReference() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the secondary compound datum reference
License requirements: None.
- secondaryContent() - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Returns the secondary content.
- secondaryContentHiddenLineColor() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the secondary content hidden line color
License requirements: None.
- secondaryContentHiddenLineFont() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the secondary content hidden line font
License requirements: None.
- secondaryContentHiddenLineWidth() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the secondary content hidden line width
License requirements: None.
- secondaryContentVisibleLineColor() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the secondary content visible line color
License requirements: None.
- secondaryContentVisibleLineFont() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the secondary content visible line font
License requirements: None.
- secondaryContentVisibleLineWidth() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the secondary content visible line width
License requirements: None.
- secondaryDatumDualMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- secondaryDatumDualText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- secondaryDatumExtendedText() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the secondary datum extended text.
- secondaryDatumMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- secondaryDatumReference() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the secondary datum reference
License requirements: None.
- secondaryDatumText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- secondaryDirection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the secondary direction
License requirements: None.
- secondaryEdge() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the secondary edge of a butt weld.
- secondaryEdge() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the secondary edge of a butt weld.
- secondaryEndOfTestCut() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the secondary end of test cut
License requirements: cam_base ("CAM BASE")
.
- secondaryFace() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the secondary face of a butt weld.
- secondaryFace() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the secondary face of a butt weld.
- secondaryFaceNormal - Variable in class nxopen.weld.WeldJointBuilder.JointMidPointData
-
The secondary body face normal in absolute coordinates at the joint mid point.
- SecondaryGeometryInViewsBuilder - Interface in nxopen.drawings
-
- secondaryHiddenByPrimaryCFW() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
Returns the visible and hidden lines color, font, and width of secondary geometry that is hidden by primary geometry.
- secondaryIndexing() - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder
-
Returns the secondary indexing
License requirements: None.
- secondaryIndexingAlign - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- secondaryLeadAngles() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the secondary lead angles, used for trailing to leading
License requirements: None.
- secondaryMeasuringStop() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the secondary measuring stop
License requirements: cam_base ("CAM BASE")
.
- secondaryNumber() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the secondary number of the drawing sheet to be created or edited
License requirements: None.
- secondaryNumber() - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
Returns the secondary number of the drawing sheet to be created
License requirements: None.
- secondaryNumberDelimiter() - Method in interface nxopen.drawings.DrawingFormatSheetBuilder
-
Returns the secondary number delimiter
License requirements: None.
- secondaryNumberString() - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
Returns the secondary number string
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- secondaryObject() - Method in interface nxopen.SketchMakeSymmetricBuilder
-
Returns the function returns the secondary object of a symmetric constraint.
- secondaryOffsetGeometry() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the secondary offset geometry
License requirements: None.
- secondaryRoughnessText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the secondary roughness text
License requirements: None.
- secondaryRoughnessType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the secondary roughness enum
License requirements: None.
- SecondarySectionData - Interface in nxopen.geometricutilities
-
- secondarySelection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the secondary selection
License requirements: None.
- secondarySequence() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the secondary test cut sequence
License requirements: None.
- secondaryStandardAngle() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the secondary standard angle.
- secondaryStartOfTestCut() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the secondary start of test cut
License requirements: cam_base ("CAM BASE")
.
- secondaryState() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the secondary state
License requirements: None.
- secondaryTestCut() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the Secondary Test Cut
License requirements: None.
- secondaryThicknessUser() - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
Returns the user defined value for secondary thickness
License requirements: None.
- secondaryType() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the secondary feature type
License requirements: None.
- secondaryVector() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the specify
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- secondaryVectorChoice() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the secondary alignment
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- secondAssociativities() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the second associativities
License requirements: None.
- secondAssociativity() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the second associativity
License requirements: None.
- secondAssociativity() - Method in interface nxopen.annotations.BaseChamferDimensionBuilder
-
Returns the second associativity
License requirements: None.
- secondAssociativity() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
Returns the second associativity.
- secondAssociativity() - Method in interface nxopen.annotations.BaseRapidDimensionBuilder
-
Returns the second associativity
License requirements: None.
- secondAssociativity() - Method in interface nxopen.annotations.BaseThicknessDimensionBuilder
-
Returns the second associativity
License requirements: None.
- secondBendRadius() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the second bend radius
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- secondBody() - Method in interface nxopen.geometricanalysis.SimpleInterference
-
Returns the Second Body
License requirements: None.
- secondBody() - Method in interface nxopen.mechatronics.ChangeMaterialBuilder
-
Returns the second body of collision pair.
- secondBody() - Method in interface nxopen.mechatronics.PreventCollisionBuilder
-
Returns the second object.
- secondBoundingObject() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the objects for the second boundary against which the selected curves are to be trimmed.
- secondBoundingObjectEndOption() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the end of the second bounding object which would be trimmed
License requirements: None.
- secondBoundingObjectOption() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the second bounding object option
License requirements: None.
- secondBoundingObjectPickPoint() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the pick point for the second bounding object
License requirements: None.
- secondBoundingPlane() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the first bounding object plane
License requirements: None.
- secondChainInstallDirection() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns
the flag to indicate whether to flip the direction of the second selected chain object or not.
- secondChainObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the second chain selected object.
- secondChannel() - Method in interface nxopen.tooling.CoolingConnectBuilder
-
Returns the second channel to be connected.
- secondClearance() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the second clearance
License requirements: None.
- secondCompartment() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the second compartment option.
- secondConstraintCurveCollector() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the second constraint curve collector
License requirements: None.
- secondContactCurve() - Method in interface nxopen.motion.CurveContactBuilder
-
Returns the selection of the second contact curve
License requirements: None.
- secondContactGeometry() - Method in interface nxopen.motion.BodyContactBuilder
-
Returns the selection of the second contact geometry
License requirements: None.
- secondConveyingSurfaceCorner() - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
Returns the second conveying surface corner of conveyor
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- secondCorner() - Method in interface nxopen.drawings.StandardViewsBuilder
-
- secondCornerEdges - Variable in class nxopen.uf.UFModl.SmreliefData
-
- secondCornerFilletRadius - Variable in class nxopen.uf.UFModl.SmreliefData
-
- secondCouple() - Method in interface nxopen.motion.LinkCouplerBuilder
-
Returns the second couple
License requirements: None.
- secondCsys() - Method in interface nxopen.motion.JointDefine
-
Returns the csys of second link
License requirements: mechanisms ("MECHANISMS")
.
- secondCurve() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
Returns the Second Curve
License requirements: None.
- secondCurve() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
Returns the second curve chain
License requirements: None.
- secondCurve() - Method in interface nxopen.features.GeodesicChamferBuilder
-
Returns the second selected curve in the section
License requirements: None.
- secondCurve() - Method in interface nxopen.features.GeodesicFilletBuilder
-
Returns the second selected curve in the section
License requirements: None.
- secondCurve() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- secondCurveMaximumPenetrationExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the second curve maximum penetration expression
License requirements: None.
- secondCurveStock() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
Returns the Stock on second Curve
License requirements: None.
- secondCurveTag - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData
-
- secondCurveToolPosition() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
Returns the Tool Position to second Curve
License requirements: None.
- secondCustomizedMaterial() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the second customized material
License requirements: mechanisms ("MECHANISMS")
.
- secondCut() - Method in interface nxopen.cam.DmStreamlineCutStep
-
Returns the second cut which defines point number for the second cut
License requirements: None.
- secondDefinitionPoint() - Method in interface nxopen.annotations.Associativity
-
Returns the second definition point.
- secondDir - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData
-
- secondDirection() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the second direction used in creating parting surface that requires two directions.
- secondDirection - Variable in class nxopen.uf.UFSubdiv.Isocline
-
- secondDistance() - Method in interface nxopen.facet.ExtrudeProfileBuilder
-
Returns the second distance to extrude
License requirements: None.
- secondDistance() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
- secondDriverJointLowerLimit() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the lower limit value for the second joint of the suspension template.
- secondDriverJointSteps() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the step number for the second joint of the suspension template.
- secondDriverJointUpperLimit() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the upper limit value for the second joint of the suspension template.
- secondEdge() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- secondEdge() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the second edges or faces.
- secondEdgeContinuity() - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Returns the second edge continuity
License requirements: None.
- secondEdgeOffset() - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Returns the second edge offset
License requirements: None.
- secondEdgeRange() - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Returns the second edge range
License requirements: None.
- secondEdgeSelection() - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Returns the second edge selection
License requirements: None.
- secondElement() - Method in interface nxopen.cae.SwapDiagonalBuilder
-
Returns the second element
License requirements: None.
- secondEndPoint() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Returns the second end point
License requirements: routing_harness ("Routing Harness")
.
- secondExpression() - Method in interface nxopen.positioning.Constraint
-
- secondExpressionDriven() - Method in interface nxopen.positioning.Constraint
-
Returns
the driven state of the second expression of a constraint.
- secondExpressionRightHandSide() - Method in interface nxopen.positioning.Constraint
-
Returns
the second expression right hand side of a constraint.
- secondExtensionLineCfw - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- secondExtensionLineColor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second extension line color
License requirements: None.
- secondExtensionLineFont() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second extension line font
License requirements: None.
- secondExtensionLineWidth() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second extension line width
License requirements: None.
- secondFace() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the second face
License requirements: None.
- secondFace - Variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.FacePairData
-
Second face of the face pair
- secondface - Variable in class nxopen.features.sheetmetal.EditCornerBuilder.FacePairData
-
Second face of the face pair
- secondFace - Variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.FacePairData
-
Second face of the face pair
- secondFace() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- secondFaceCollector() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the second face collector
License requirements: None.
- secondFaceSet() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the second selected face set
License requirements: None.
- secondFaceset() - Method in interface nxopen.weld.GrooveBuilder
-
- secondFacesetBottomEdges() - Method in interface nxopen.weld.GrooveBuilder
-
- secondFacesetHelpPoint() - Method in interface nxopen.weld.GrooveBuilder
-
- secondFacesetTopEdges() - Method in interface nxopen.weld.GrooveBuilder
-
- secondFlangeLength() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the second flange length
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- secondGeometry() - Method in interface nxopen.SketchDimensionBuilder
-
Returns the second geometry.
- secondGeometryBoundingBufferLengthExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the bounding Buffer Length expression
License requirements: None.
- secondGeometryMaterialDirection() - Method in interface nxopen.motion.CurveContactBuilder
-
Returns the second geometry materia side direction
License requirements: None.
- secondGeometryMaxFacetSizeFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the max Facet Size Factor expression
License requirements: None.
- secondGeometryMaxFacetSizeFactorFlag() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the max Facet Size Factor Flag
License requirements: None.
- secondGeometryMaximumPenetrationExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the Plane Maximum Penetration of the second geometry expression
License requirements: None.
- secondGeometryPlaneToleranceFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the Plane Tolerance Factor of the second geometry expression
License requirements: None.
- secondGeometryPlaneToleranceFactorSolidContactExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the Plane Tolerance Factor of the second geometry for solid contact expression
License requirements: None.
- secondGuide() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the second guide
License requirements: None.
- secondIntersectionPoints() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Returns the selected intersection points between the curves and the second boundary.
- secondJogAngle() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second jog angle, between the jog and the extension line, in degrees.
- secondJogDisplay() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second jog's display flag, if true, the second jog will be displayed, false otherwise
License requirements: None.
- secondJogEndOffset() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second jog end offset from the dimension line
License requirements: None.
- secondJogOrientation() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second jog orientation, can be either IN or OUT
License requirements: None.
- secondJogStartOffset() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the second jog start offset from the dimension line
License requirements: None.
- secondJoint() - Method in interface nxopen.motion.CouplerBuilder
-
Returns the second joint
License requirements: None.
- secondJoint() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the selected second joint
License requirements: None.
- secondLawControl() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the Second Offset Law builder
License requirements: None.
- secondLeg() - Method in interface nxopen.weld.FilletBuilder
-
Returns the linear dimension second leg.
- secondLength() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the second section length.
- secondLine - Variable in class nxopen.uf.UFModl.DimensionData
-
- secondLinearDistance() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the second linear distance
License requirements: None.
- secondLink() - Method in interface nxopen.motion.JointDefine
-
Returns the second link
License requirements: mechanisms ("MECHANISMS")
.
- secondLocation() - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilder
-
Returns the second location
License requirements: None.
- secondLowerLimitEnabled() - Method in interface nxopen.positioning.Constraint
-
Returns
the lower limit of the second expression of a constraint.
- secondLowerLimitExpression() - Method in interface nxopen.positioning.Constraint
-
Returns
the lower limit of the second expression of a constraint.
- secondLowerLimitRightHandSide() - Method in interface nxopen.positioning.Constraint
-
Returns
the lower limit of the second expression right hand side of a constraint.
- secondMapView() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the second map view
License requirements: None.
- secondMargin() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the second margin tag
License requirements: None.
- secondMatrix() - Method in interface nxopen.motion.JointDefine
-
Returns the matrix of second link
License requirements: mechanisms ("MECHANISMS")
.
- secondObject() - Method in interface nxopen.annotations.Associativity
-
Returns the second associativity object, if the annotation is associated to
an intersection point.
- secondObject() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the second object
License requirements: None.
- secondObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the second selected object.
- secondObjectFilter() - Method in interface nxopen.cam.CollisionPairBuilder
-
Returns the second collision selection filter
License requirements: None.
- secondObjectName() - Method in interface nxopen.cam.CollisionPairBuilder
-
Returns the second collision selection name
License requirements: None.
- secondObjectType() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the second object type
License requirements: None.
- secondOffset() - Method in interface nxopen.features.ChamferBuilder
-
Returns the second offset distance (expression).
- secondOffset() - Method in interface nxopen.features.SweepAlongGuideBuilder
-
Returns the second offset
License requirements: None.
- secondOffset() - Method in interface nxopen.features.ThickenBuilder
-
Returns the second offset.
- secondOffset() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the second offset for the conic section with face blend
License requirements: None.
- secondOffset() - Method in interface nxopen.routing.CrossSection
-
Returns the offset expression applied to the profile when generating a Sweep.
- secondOffset - Variable in class nxopen.uf.UFModl.AskThickenSheetParmsData
-
- secondOffsetExp() - Method in interface nxopen.features.ChamferBuilder
-
Returns the second offset expression object of chamfer.
- secondOffsetOption() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the second offset option for the conic section with face blend
License requirements: None.
- secondOrientationType() - Method in interface nxopen.motion.JointDefine
-
Returns the second orientation type of joint
License requirements: mechanisms ("MECHANISMS")
.
- secondOrigin() - Method in interface nxopen.motion.JointDefine
-
Returns the origin of second link
License requirements: mechanisms ("MECHANISMS")
.
- secondPanelFaces() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Second Panel face selection
License requirements: solid_modeling ("SOLIDS MODELING")
.
- secondPanelInnerContactCurves() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Second Panel inner contact section
License requirements: solid_modeling ("SOLIDS MODELING")
.
- secondPanelOuterContactCurves() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Second Panel outer contact section
License requirements: solid_modeling ("SOLIDS MODELING")
.
- secondPanelType() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Second Panel type
License requirements: solid_modeling ("SOLIDS MODELING")
.
- secondPenetrationDepth() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the second penetration depth
License requirements: ugweld ("UG WELD")
.
- secondPlane() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the second plane
License requirements: None.
- secondPlane() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the second selected plane.
- secondPlane() - Method in interface nxopen.routing.FittingOverstockBuilder
-
Returns the second trimming plane
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- secondpoint - Variable in class nxopen.cae.BoxBoundingVolume.DiagonalPointsData
-
- secondPoint(Point3d, View) - Method in interface nxopen.display.NonProportionalZoom
-
Scales the specified view non-proportionally in the horizontal (X) and vertical (Y)
dimensions, based on a mouse gesture defined by two points in a view.
- secondPoint() - Method in interface nxopen.features.GeodesicChamferBuilder
-
Returns the second selection point
License requirements: None.
- secondPoint() - Method in interface nxopen.features.GeodesicFilletBuilder
-
Returns the second selection point
License requirements: None.
- secondPoint - Variable in class nxopen.uf.UFModl.DimensionData
-
- secondPosToExtensionLineDistance() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the distance from the position on the object being dimensioned to
the end of the second extension line
License requirements: None.
- secondPosToExtensionLineDistance - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- secondPosToExtLineDist() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the second position to extension line distance
License requirements: None.
- secondPrincipleMi() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the second principle mi
License requirements: None.
- secondPtSelect() - Method in interface nxopen.cae.FaceFromBoundaryBuilder
-
Returns the second pt to join the ends of open edges in the loop.
- secondRadius() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the Second Radius
License requirements: None.
- secondRadiusExpression() - Method in interface nxopen.motion.CouplerBuilder
-
Returns the second radius expression.
- secondReferenceIntersection() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the second user defined intersection point.
- secondRegionLimitCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the second region limit curve
License requirements: None.
- secondRegionLimitCurveOffsetLaw() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the second region limit curve offset law
License requirements: None.
- secondRegionOffsetCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the second region offset curve
License requirements: None.
- secondRevolutionBodies() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the second revolution bodies
License requirements: mechanisms ("MECHANISMS")
.
- secondRevolutionGeometryData() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the second revolution line-arc file option
License requirements: mechanisms ("MECHANISMS")
.
- secondRevolutionGeometryDataFile() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the second revolution line-arc file.
- secondRevolutionLink() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the second revolution link
License requirements: mechanisms ("MECHANISMS")
.
- secondRevolutionMaterialSide() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the material side toggle for second revolution
License requirements: mechanisms ("MECHANISMS")
.
- secondRun() - Method in interface nxopen.routing.IntegrateRunsBuilder
-
Returns the second run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- SECONDS - Static variable in class nxopen.cam.Cycle.DwellType
-
dwell seconds
- SECONDS - Static variable in class nxopen.cam.CycleDwell.Mode
-
dwell seconds
- SECONDS - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.DwellUnitTypes
-
Seconds
- secondsBetweenSteps() - Method in interface nxopen.features.FeatureReplayBuilder
-
Returns the delay in seconds between replay steps
License requirements: solid_modeling ("SOLIDS MODELING")
.
- secondScaleExpression() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the second scale expression
License requirements: None.
- secondScrap() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the second scrap to merge with the first one
License requirements: None.
- secondSection() - Method in interface nxopen.features.GeodesicChamferBuilder
-
Returns the second section of curves to chamfer
License requirements: None.
- secondSection() - Method in interface nxopen.features.GeodesicFilletBuilder
-
Returns the second section of curves to fillet
License requirements: None.
- secondSection() - Method in interface nxopen.features.RuledBuilder
-
Returns the second section
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- secondSegment() - Method in interface nxopen.routing.DiscontinuityCorner
-
Returns the second segment of a discontinuity corner, segment must be
attached to the
ControlPoint
that
defines this corner.
- secondSelectElement() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
Returns the second element selection
License requirements: None.
- secondSelection() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
Returns the second selection
License requirements: None.
- secondSet() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the second set required only for non-associative intersection curve
License requirements: None.
- secondSheetId - Variable in class nxopen.uf.UFModlFeatures.IsodivideFaceData
-
- secondSphereLink() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the second sphere link
License requirements: mechanisms ("MECHANISMS")
.
- secondSpherePoint() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the second sphere point
License requirements: mechanisms ("MECHANISMS")
.
- secondSphereRadius() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the second sphere radius
License requirements: mechanisms ("MECHANISMS")
.
- secondSuperElementIncrement() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the second super element increment
License requirements: mechanisms ("MECHANISMS")
.
- secondSuperElementLink() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the second super element link
License requirements: mechanisms ("MECHANISMS")
.
- secondTargetCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the second target curve
License requirements: None.
- secondTargetCurveOffset() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the second target curve offset
License requirements: None.
- secondType() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the second joint movement type
License requirements: None.
- secondUpperLimitEnabled() - Method in interface nxopen.positioning.Constraint
-
Returns
the upper limit of the second expression of a constraint.
- secondUpperLimitExpression() - Method in interface nxopen.positioning.Constraint
-
Returns
the upper limit of the second expression of a constraint.
- secondUpperLimitRightHandSide() - Method in interface nxopen.positioning.Constraint
-
Returns
the upper limit of the second expression right hand side of a constraint.
- secondVector() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the second vector
License requirements: None.
- secondVector() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Returns the second vector
License requirements: None.
- secondVector() - Method in interface nxopen.motion.JointDefine
-
Returns the direction of second link
License requirements: mechanisms ("MECHANISMS")
.
- secondVectorForBunnyEar() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the second vector for bunny ear
License requirements: None.
- secondVectorView() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the second vector view
License requirements: None.
- secPlanes - Variable in class nxopen.uf.UFProcessAid.AskSectionOfDatumData
-
- SECSRF_CONSTANT - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod
-
- SECSRF_CUBIC - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod
-
- SECSRF_ENDS_APEX_HILITE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_ENDS_APEX_RHO - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_ENDS_APEX_SHOULDER - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_ENDS_SLOPE_ARC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_ENDS_SLOPES_CUBIC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_ENDS_SLOPES_HILITE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_ENDS_SLOPES_RHO - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_ENDS_SLOPES_SHOULDER - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_FILLET_CUBIC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_FILLET_HILITE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_FILLET_RHO - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_FILLET_SHOULDER - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_FIVE_POINTS - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_FOUR_POINTS_SLOPE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_FULL_CIRCLE - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_GENERAL - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod
-
- SECSRF_INIT_CREATE_METHOD - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_LINEAR - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod
-
- SECSRF_NO_DATA - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod
-
- SECSRF_NOT_USED1 - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_NOT_USED2 - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_POINT_RADIUS_ANGLE_ARC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_TENSION - Static variable in class nxopen.uf.UFModl.SecsrfParamMethod
-
- SECSRF_THREE_POINTS_ARC - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- SECSRF_TWO_POINTS_RADIUS - Static variable in class nxopen.uf.UFModl.SecsrfCreMethod
-
- sectCriteria() - Method in interface nxopen.cae.CyclicSymmetricParameters
-
Returns the sector criteria enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- SECTION - Static variable in class nxopen.cae.connections.ModelizationResultType
-
Section
- section - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- section - Variable in class nxopen.cae.Result.Type
-
- section - Variable in class nxopen.cae.ResultParameters.AskSectionPlyLayerData
-
- section() - Method in interface nxopen.die.AddendumSectionUserDefinedBuilder
-
Returns the objects defining the section, either a previously defined section or a string of objects defining the section shape.
- SECTION - Static variable in class nxopen.die.ClearanceBuilder.ClearanceGeometryTypes
-
The input is closed profiles.
- section() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the closed profile sections to use for the basis of the clearance area.
- section() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the section builder of the draw die punch.
- section() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the open section constructed from curves, edges, or a sketch.
- SECTION - Static variable in class nxopen.die.FingerClearanceNotchBuilder.Types
-
Build from an open section profile.
- SECTION - Static variable in class nxopen.die.OutputCurvesBuilder.TrimCurveCreateTypes
-
Section.
- section() - Method in interface nxopen.die.RotorBuilder
-
Returns the section builder of the rotor.
- section() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the section builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- SECTION - Static variable in class nxopen.Direction.OnFaceOption
-
Creates direction in a sectional direction to face.
- SECTION - Static variable in class nxopen.display.DynamicSectionTypes.Clip
-
One sided clip
- section() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Section .
- section() - Method in interface nxopen.ExpressionSectionSet
-
Returns the section
License requirements: None.
- section() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the section
License requirements: None.
- section() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the section
License requirements: None.
- SECTION - Static variable in class nxopen.features.BridgeCurveBuilderEx.EndObjectTypes
-
Section
- SECTION - Static variable in class nxopen.features.BridgeCurveBuilderEx.StartObjectTypes
-
Section
- section() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the section
License requirements: None.
- section() - Method in interface nxopen.features.CurveLengthBuilder
-
Returns the section
License requirements: solid_modeling ("SOLIDS MODELING")
.
- section() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the section.
- section() - Method in interface nxopen.features.DeleteCurveBuilder
-
Returns the section
License requirements: None.
- SECTION - Static variable in class nxopen.features.EmbossLimit.EndcapSourceOption
-
Indicates the geometry is the sketch plane on which the section resides.
- section() - Method in interface nxopen.features.EmbossRegion
-
Returns the section that is composed of chains
License requirements: None.
- section() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the section
License requirements: None.
- SECTION - Static variable in class nxopen.features.GeometricConstraintData.ParameterDirection
-
General section if point is attached to face
- section() - Method in interface nxopen.features.JoinCurvesBuilder
-
Returns the section that collects the input curves that are to be joined.
- SECTION - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
section
- section() - Method in interface nxopen.features.ResizeChamferCurveBuilder
-
Returns the selected section
License requirements: None.
- section() - Method in interface nxopen.features.RevolveBuilder
-
Returns the section
License requirements: None.
- section() - Method in interface nxopen.features.RibBuilder
-
Returns the input section
License requirements: None.
- section() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the Section used by the bead. section should be open.
- section() - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Returns the Section
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- section() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Returns the section of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- section() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Returns the Section used by the Dimple.
- section() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the Section used by the Drawn Cutout.
- section() - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder
-
Returns the section used by Edge Rip
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- section() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
- section() - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- section() - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Returns the section used by the louver.
- section() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the section used by the normal cutout.
- section() - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Returns the section of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- section() - Method in interface nxopen.features.shipdesign.RoomBuilder
-
Returns the section.
- SECTION - Static variable in class nxopen.features.shipdesign.SelectPartBuilder.Types
-
- SECTION - Static variable in class nxopen.features.shipdesign.TransitionBuilder.TransitionTypes
-
- SECTION - Static variable in class nxopen.features.StyledSweepBuilder.FixedStringOptions
-
Section
- section() - Method in interface nxopen.features.SweepAlongGuideBuilder
-
Returns the section
License requirements: None.
- section() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the master section.
- SECTION - Static variable in class nxopen.geometricutilities.AlongPathPattern.YDirectionOptions
-
y direction is a section.
- section() - Method in interface nxopen.geometricutilities.SpineDefinitionBuilder
-
Returns the section
License requirements: None.
- SECTION - Static variable in class nxopen.layout2d.CreateComponentFrom3DBuilder.CreateMethod
-
use section
- SECTION - Static variable in class nxopen.Offset.OnFaceOption
-
Creates offset representing curvature in a sectional direction on face.
- section() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to Section .
- Section - Interface in nxopen
-
Represents a section
Section consists of "chained_entity", a chain or a single entity of edge or curve.
- section() - Method in interface nxopen.SketchAlongPathBuilder
-
Returns the path
License requirements: None.
- section() - Method in interface nxopen.SketchEvaluator
-
Returns the master section.
- section() - Method in interface nxopen.SketchMirrorPatternBuilder
-
Returns the pattern section
License requirements: None.
- section() - Method in interface nxopen.SketchPatternBuilder
-
Returns the pattern section
License requirements: None.
- section() - Method in interface nxopen.SketchProjectBuilder
-
Returns the section.
- Section.AllowTypes - Class in nxopen
-
Defines entity types allowed.
- Section.DeselectOption - Class in nxopen
-
Defines type of deselect option.
- Section.Mode - Class in nxopen
-
Defines mode with respect to feature create or edit mode.
- Section.StartAndDirectionData - Class in nxopen
-
- Section.StartAndDirectionOfLoopData - Class in nxopen
-
- section1() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the first section used in Centerline.
- section2() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the second section used in Centerline.
- section3() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the third section used in Offset from Edge.
- section4() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the fourth section used in Existing Curve.
- SECTION_AREA - Static variable in class nxopen.IgesCreator.CrossHatchMapEnum
-
map cross hatch as section area
- SECTION_BETWEEN_INTERSECTION - Static variable in class nxopen.Section.DeselectOption
-
Potion of the loop between intersections will be deselected this may contain multiple chains
- SECTION_CURVES - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.OutputType
-
section curves
- SECTION_CURVES - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.OutputType
-
section curves
- SECTION_EDGE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Specifies Section Edge Curve
- SECTION_EDGE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType
-
- SECTION_EXISTING - Static variable in class nxopen.drawings.ViewOrientationBuilder.Orientation
-
Section an Existing View
- SECTION_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- SECTION_INFORMATION - Static variable in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Field whose value comes from section
- SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.BeadBuilder.HeightSideOptions
-
Material removed on the side of the section normal.
- SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.BendBuilder.BendDirectionOptions
-
Bend is created on the side of the section normal.
- SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepSideOptions
-
- SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.DimpleBuilder.DepthTypeOptions
-
Dimple punched on the side of the section normal.
- SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.DrawnCutoutBuilder.DepthTypeOptions
-
Drawn Cutout punched on the side of the section normal.
- SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.JogBuilder.DirectionTypeOptions
-
jog created on the side of the section normal.
- SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.LouverBuilder.DepthSideOptions
-
Material added on the side of the section normal.
- SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthSideOptions
-
Material removed on the side of the section normal.
- SECTION_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.TabBuilder.ThicknessSideOptions
-
Material created on the side of the section normal.
- SECTION_OFFSET - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- SECTION_ORIENTATION - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- SECTION_PLANE - Static variable in class nxopen.features.TextBuilder.OnFacePlacementMethodOptions
-
Placement on intersection curve created by a plane and the faces
- SECTION_PLANE - Static variable in class nxopen.weld.WeldPointLocation
-
Place spot welds along a section curve
- SECTION_PROPERTY - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
-
Section property variables
- SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.BeadBuilder.HeightSideOptions
-
Material removed on the side opposite to that of the section normal
- SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.BendBuilder.BendDirectionOptions
-
Bend is created on the side opposite to that of the section normal
- SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepSideOptions
-
- SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.DimpleBuilder.DepthTypeOptions
-
Dimple punched on the side opposite to that of the section normal
- SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.DrawnCutoutBuilder.DepthTypeOptions
-
Drawn Cutout punched on the side opposite to that of the section normal
- SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.JogBuilder.DirectionTypeOptions
-
jog created on the side opposite to that of the section normal
- SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.LouverBuilder.DepthSideOptions
-
Material added on the side opposite to that of the section normal.
- SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthSideOptions
-
Material removed on the side opposite to that of the section normal
- SECTION_REVERSE_NORMAL_SIDE - Static variable in class nxopen.features.sheetmetal.TabBuilder.ThicknessSideOptions
-
Material created on the side opposite to that of the section normal
- SECTION_SIDE_LEFT - Static variable in class nxopen.features.sheetmetal.BendBuilder.FixedSideOptions
-
Side pointed to by the inverse of the tangent cross normal vector
- SECTION_SIDE_LEFT - Static variable in class nxopen.features.sheetmetal.JogBuilder.FixedSideOptions
-
Side pointed to by the inverse of the tangent cross normal vector
- SECTION_SIDE_RIGHT - Static variable in class nxopen.features.sheetmetal.BendBuilder.FixedSideOptions
-
Side pointed to by the tangent cross normal vector
- SECTION_SIDE_RIGHT - Static variable in class nxopen.features.sheetmetal.JogBuilder.FixedSideOptions
-
Side pointed to by the tangent cross normal vector
- SECTION_SUBTYPE - Static variable in class nxopen.uf.UFView.Subtype
-
- SECTION_VIEW - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.ViewCreationType
-
- SECTIONAL - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Create sectional sweep surface.
- SECTIONAL - Static variable in class nxopen.die.AddSurfBuilder.Methods
-
Sweep section around tangency curve.
- SECTIONAL - Static variable in class nxopen.features.BridgeCurveBuilder.SurfaceDirectionTypes
-
Deprecated.
bridge direction takes non-isoparametric direction
of the base surface at the selected point
- SECTIONAL - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
Sectional
- SECTIONAL - Static variable in class nxopen.geometricanalysis.RadiusAnalysisBuilder.Types
-
Sectional radius.
- SECTIONAL - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.CurvatureType
-
- SECTIONAL - Static variable in class nxopen.geometricutilities.BridgeCurveConnectivity.FaceDirectionOptions
-
Sectional direction
- sectionAlignment() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Section Alignment
License requirements: solid_modeling ("SOLIDS MODELING")
.
- sectionAlignmentDirection() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the section alignment vector
License requirements: solid_modeling ("SOLIDS MODELING")
.
- sectionAlignmentVector() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the section alignment vector
License requirements: None.
- SectionAnalysisBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
-
- SectionAnalysisBuilder.CalculationMethodType - Class in nxopen.geometricanalysis.sectionanalysis
-
The calculation method
- SectionAnalysisBuilder.NeedleDirectionType - Class in nxopen.geometricanalysis.sectionanalysis
-
The needle direction
- SectionAnalysisBuilder.OutputType - Class in nxopen.geometricanalysis.sectionanalysis
-
The output options
- SectionAnalysisBuilder.ScalingMethodType - Class in nxopen.geometricanalysis.sectionanalysis
-
The scaling method
- SectionAnalysisBuilder.Types - Class in nxopen.geometricanalysis.sectionanalysis
-
Represents the sectioning types
- SectionAnalysisExBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
-
- SectionAnalysisExBuilder.AlignmentType - Class in nxopen.geometricanalysis.sectionanalysis
-
The section alignment type
- SectionAnalysisExBuilder.CalculationMethodType - Class in nxopen.geometricanalysis.sectionanalysis
-
The calculation method
- SectionAnalysisExBuilder.NeedleDirectionType - Class in nxopen.geometricanalysis.sectionanalysis
-
The needle direction
- SectionAnalysisExBuilder.OutputType - Class in nxopen.geometricanalysis.sectionanalysis
-
The output options
- SectionAnalysisExBuilder.PlacementType - Class in nxopen.geometricanalysis.sectionanalysis
-
The types of the section placement
- SectionAnalysisExBuilder.ScalingMethodType - Class in nxopen.geometricanalysis.sectionanalysis
-
The scaling method
- SectionAnalysisExObject - Interface in nxopen.geometricanalysis.sectionanalysis
-
Represents a Section Analysis Object of the new version.
- SectionAnalysisObject - Interface in nxopen.geometricanalysis
-
Represents a Section Analysis object.
- sectionAngle() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Returns the section angle.
- sectionArea() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the section area
License requirements: None.
- sectionAskParallelData(Tag) - Method in interface nxopen.uf.UFCurve
-
- SectionAskParallelData() - Constructor for class nxopen.uf.UFCurve.SectionAskParallelData
-
- sectionAskPerpcrvData(Tag) - Method in interface nxopen.uf.UFCurve
-
- SectionAskPerpcrvData() - Constructor for class nxopen.uf.UFCurve.SectionAskPerpcrvData
-
- sectionAskPlanesData(Tag) - Method in interface nxopen.uf.UFCurve
-
- SectionAskPlanesData() - Constructor for class nxopen.uf.UFCurve.SectionAskPlanesData
-
- sectionAskRadialData(Tag) - Method in interface nxopen.uf.UFCurve
-
- SectionAskRadialData() - Constructor for class nxopen.uf.UFCurve.SectionAskRadialData
-
- sectionAskType(Tag) - Method in interface nxopen.uf.UFCurve
-
- sectionAtAftEnd() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the cross section at the aft end of the beam element.
- sectionAtForeEnd() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the cross section at the fore end of the beam element.
- sectionAxis() - Method in interface nxopen.motion.SplineBeamBuilder
-
Returns the section orientation axis type
License requirements: mechanisms ("MECHANISMS")
.
- SectionBasedMatrixRecord - Interface in nxopen.cae.ftk
-
Represents a kind of record data could be displayed by 3D graphing.
- SectionBuilder - Interface in nxopen.blockstyler
-
Represents a Section Builder .
- SectionCollection - Interface in nxopen
-
This class contains the factory methods for creating a section.
- SectionCollection.LoopOption - Class in nxopen
-
- sectionCornerRadius() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
Returns the section corner radius
License requirements: None.
- sectionCount() - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord
-
Returns the section count
License requirements: None.
- SectionCurve - Interface in nxopen.features
-
Represents a section curves feature.
- sectionCurve() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the section curve type of the under axle surface.
- sectionCurveAskParents(Tag) - Method in interface nxopen.uf.UFCurve
-
- SectionCurveAskParentsData() - Constructor for class nxopen.uf.UFCurve.SectionCurveAskParentsData
-
- SectionCurveBuilder - Interface in nxopen.features
-
- SectionCurveBuilder.PlaneType - Class in nxopen.features
-
Represents section plane type.
- SectionCurveBuilder.SpacingType - Class in nxopen.features
-
Represents spacing type.
- sectionCurveFitData() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the section curve fit
License requirements: None.
- sectionCurveSettings() - Method in interface nxopen.display.BoundedGridBuilder
-
Returns the curve settings builder
License requirements: None.
- SectionCurveSettingsBuilder - Interface in nxopen.display
-
- SectionCurveSettingsBuilder.ColorOptionType - Class in nxopen.display
-
Specifies the color of the curves.
- sectionCurvesFeature - Variable in class nxopen.uf.UFCurve.SectionCurveAskParentsData
-
- SectionData() - Constructor for class nxopen.cae.ftk.ComplexSectionBasedMatrixRecord.SectionData
-
- SectionData() - Constructor for class nxopen.cae.ftk.RealSectionBasedMatrixRecord.SectionData
-
- sectionData() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the section data.
- sectionData() - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
Returns the section data.
- SectionData - Interface in nxopen
-
Represents section data .
- SectionDrawingBuilder - Interface in nxopen.features.shipdesign
-
This builder allows you to define the section drawing information.
- SectionDrawingBuilder.SectionsPerDrawingOptions - Class in nxopen.features.shipdesign
-
Settings to indicate the section per drawing.
- SectionDrawingBuilder.ViewsPerSheetOptions - Class in nxopen.features.shipdesign
-
Settings to indicate the views per sheet.
- SectionDrawingBuilder.ViewTypeOptions - Class in nxopen.features.shipdesign
-
Settings to indicate the view type.
- SECTIONED - Static variable in class nxopen.uf.UFDraw.CompSectionInView
-
- SECTIONED_PART - Static variable in class nxopen.drawings.SectionViewBuilder.SectionCutType
-
- sectionedHiddenColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the sectioned hidden color on the Ship Structure Lines
License requirements: None.
- sectionedHiddenFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the sectioned hidden font on the Ship Structure Lines
License requirements: None.
- sectionedHiddenWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the sectioned hidden width on the Ship Structure Lines
License requirements: None.
- SectionEdit - Interface in nxopen.features
-
Represents a section edit feature
To create or edit an instance of this class, use
SectionEditBuilder
Created in NX6.0.0
- SectionEditBuilder - Interface in nxopen.features
-
- SectionEditorBuilder - Interface in nxopen.features.shipdesign
-
- sectionedSecondaryHiddenColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the Secondary sectioned hidden color on the Ship Structure Lines
License requirements: None.
- sectionedSecondaryHiddenFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the Secondary sectioned hidden font on the Ship Structure Lines
License requirements: None.
- sectionedSecondaryHiddenWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the Secondary sectioned hidden width on the Ship Structure Lines
License requirements: None.
- sectionedSecondaryVisibleColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the Secondary sectioned visible color on the Ship Structure Lines
License requirements: None.
- sectionedSecondaryVisibleFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the Secondary sectioned visible font on the Ship Structure Lines
License requirements: None.
- sectionedSecondaryVisibleWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the Secondary sectioned visible width on the Ship Structure Lines
License requirements: None.
- sectionedVisibleColor() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the sectioned visible color on the Ship Structure Lines
License requirements: None.
- sectionedVisibleFont() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the sectioned visible font on the Ship Structure Lines
License requirements: None.
- sectionedVisibleWidth() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the sectioned visible width on the Ship Structure Lines
License requirements: None.
- sectionElement - Variable in class nxopen.SectionElementData.Data
-
The element that constructs the section
- sectionElement - Variable in class nxopen.SectionElementData.SectionElementData1
-
The element that constructs the section - this can be curve or point.
- SectionElementData - Interface in nxopen
-
Represents section element data .
- SectionElementData.Data - Class in nxopen
-
- SectionElementData.SectionElementData1 - Class in nxopen
-
- SectionElementData1() - Constructor for class nxopen.SectionElementData.SectionElementData1
-
- sectionEndGuide() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the section end guide.
- sectionFileBrowser() - Method in interface nxopen.linedesigner.CreateFenceBuilder
-
Returns the section file browser
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- sectionFrameType() - Method in interface nxopen.features.shipdesign.SelectPartBuilder
-
Returns the select type.
- sectionFromParallelPlanes(UFCurve.SectionGeneralData, UFCurve.SectionParallelData) - Method in interface nxopen.uf.UFCurve
-
- sectionFromPerpcrvPlanes(UFCurve.SectionGeneralData, UFCurve.SectionPerpcrvData) - Method in interface nxopen.uf.UFCurve
-
- sectionFromPlanes(UFCurve.SectionGeneralData, UFCurve.SectionPlanesData) - Method in interface nxopen.uf.UFCurve
-
- sectionFromRadialPlanes(UFCurve.SectionGeneralData, UFCurve.SectionRadialData) - Method in interface nxopen.uf.UFCurve
-
- SectionGeneralData() - Constructor for class nxopen.uf.UFCurve.SectionGeneralData
-
- SectionGeneralData(Tag[], int, int, int, int, double, UFModl.CurveFitData) - Constructor for class nxopen.uf.UFCurve.SectionGeneralData
-
- sectionGeometryTolerance() - Method in interface nxopen.drawings.ViewSettingsBuilder
-
Returns the section geometry tolerance
License requirements: None.
- sectionGuide() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the section guide - vent holes are placed along this guide
License requirements: None.
- sectionGuide() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the section guide
License requirements: None.
- sectionHeight() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the section height.
- SectionInertiaAnalysis - Interface in nxopen.features
-
- SectionInertiaAnalysisBuilder - Interface in nxopen.features
-
- SectionInertiaAnalysisBuilder.CoordSys - Class in nxopen.features
-
The coordinate system associated with the analysis.
- SectionInertiaAnalysisBuilder.PropertyType - Class in nxopen.features
-
Type of Analysis property.
- SectionInertiaAnalysisBuilder.SampleMethod - Class in nxopen.features
-
Type of sampling method to be used in sections along curve type of analysis.
- SectionInertiaAnalysisBuilder.SectionAxisNormal - Class in nxopen.features
-
Slice direction in case of parallel section type of analysis.
- SectionInertiaAnalysisBuilder.Types - Class in nxopen.features
-
The type of Section Inertia Analysis to be performed.
- sectioningMethod() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the sectioning method
License requirements: None.
- sectioningObjects - Variable in class nxopen.uf.UFCurve.SectionCurveAskParentsData
-
- sectionInteriorGuide1() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the interior guide1.
- sectionInteriorGuide2() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the section interior guide2.
- sectionInteriorGuide3() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the section interior guide3.
- SectionInViewBuilder - Interface in nxopen.drawings
-
- SectionInViewBuilder.EditSxtype - Class in nxopen.drawings
-
Edit Section type
- sectionLayer() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the section layer
License requirements: None.
- sectionLayer() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the layer of the tire envelope sections.
- sectionLength() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the section length
License requirements: None.
- SectionLine - Interface in nxopen.drawings
-
Represents a Section Line.
- sectionLine() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the section Line
License requirements: None.
- sectionLine() - Method in interface nxopen.drawings.SpecifySectionLineBuilder
-
Returns the section line
License requirements: drafting ("DRAFTING")
.
- SectionLineBuilder - Interface in nxopen.drawings
-
- SectionLineBuilder.Types - Class in nxopen.drawings
-
Deprecated.
Section Line type
- SectionLineCollection - Interface in nxopen.drawings
-
- SectionLineCreationBuilder - Interface in nxopen.tooling
-
- sectionLineOnlyPlacementOrigin() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder
-
Returns the section line only placement origin center in inferred mode
License requirements: None.
- sectionLines() - Method in interface nxopen.DraftingManager
-
Section Line Collection .
- SectionLineSegmentBuilder - Interface in nxopen.drawings
-
- SectionLineSegmentBuilder.Types - Class in nxopen.drawings
-
the point
- SectionLineSegmentBuilderList - Interface in nxopen.drawings
-
Represents a list of objects.
- SectionLineSegmentPointBuilder - Interface in nxopen.drawings
-
- SectionLineSegmentPointBuilder.SegmentTypes - Class in nxopen.drawings
-
Section Segment Types
- SectionLineSegmentPointListBuilder - Interface in nxopen.drawings
-
Represents SectionLineSegmentPointListBuilder class.
- sectionLineSegments() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the section line segment builder
License requirements: None.
- SectionLineSegmentsBuilder - Interface in nxopen.drawings
-
Represents a class Drawings.SectionLineSegmentsBuilder.
- SectionLineSettingsBuilder - Interface in nxopen.drawings
-
Represents the Section Line Settings Builder (Drawings.SectionLineSettingsBuilder) which manages all the style attributes related
to the section Line including label letter.
- SectionLineStyleBuilder - Interface in nxopen.drawings
-
Represents a Drawings.SectionLineStyleBuiler.
- SectionLineStyleBuilder.ArrowheadStyleType - Class in nxopen.drawings
-
- SectionLineStyleBuilder.CreateSectionLineType - Class in nxopen.drawings
-
- SectionLineStyleBuilder.FontStyle - Class in nxopen.drawings
-
- SectionLineStyleBuilder.LabelLocationStyle - Class in nxopen.drawings
-
- SectionLineStyleBuilder.StandardStyle - Class in nxopen.drawings
-
- SectionLineStyleBuilder.WidthStyle - Class in nxopen.drawings
-
- sectionLineType() - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Returns the section line type
License requirements: None.
- sectionList() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the list of sections
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- sectionList() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the list of sections
License requirements: None.
- sectionList() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the list of sections.
- sectionList() - Method in interface nxopen.features.SweptBuilder
-
Returns the list of sections.
- SectionList - Interface in nxopen
-
Represents a list of objects.
- sectionLocation() - Method in interface nxopen.features.SweptBuilder
-
Returns the section location option.
- sectionMappingFile() - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
Returns the file name of the section mapping from the native file system
License requirements: None.
- sectionMethodCircleTangent() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the section method circle tangent.
- sectionMethodCircularTangent() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- sectionMethodFilletBridge() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- sectionMethodFilletBridge() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the section method fillet bridge.
- sectionMethodRho() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- sectionMethodRho() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the section method rho.
- sectionName() - Method in interface nxopen.cae.IBeamSectionBuilder
-
Returns the section name
License requirements: None.
- sectionName() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the section name
License requirements: None.
- sectionNormal() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the section normal
License requirements: None.
- sectionNumber() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the ship section number.
- sectionNumber() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the section number
License requirements: None.
- sectionNumber1() - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
Returns the number of sections in direction 1
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- sectionNumber2() - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
Returns the number of sections in direction 2
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- sectionObject() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
Returns the section as revolving profile.
- sectionOffset() - Method in interface nxopen.tooling.RunnerBuilder
-
Returns the offset value of the runner section.
- sectionOption() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns whether to use a section plane or maninpulator for sectional curvatures.
- sectionOrientation() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the section orientation.
- sectionOrientation() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the section orientation for sectional curvatures.
- sectionOrientationGuide() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the section orientation guide.
- sectionOrientationOption() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the section orientation option
License requirements: None.
- sectionOrigin() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the section origin for sectional curvatures.
- SectionParallelData() - Constructor for class nxopen.uf.UFCurve.SectionParallelData
-
- SectionParallelData(Tag, double, double, double) - Constructor for class nxopen.uf.UFCurve.SectionParallelData
-
- sectionPart() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the section part
License requirements: None.
- SectionPerpcrvData() - Constructor for class nxopen.uf.UFCurve.SectionPerpcrvData
-
- SectionPerpcrvData(Tag, int, int, int, double, double, double, double, double) - Constructor for class nxopen.uf.UFCurve.SectionPerpcrvData
-
- sectionPlacement() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the throat section placement along the center line, an expression containg the length along the centerline for placement
License requirements: ug_die_design ("Die Design")
.
- sectionPlane() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the section plane.
- sectionPlane() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the plane
License requirements: None.
- sectionPlane() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the section plane
License requirements: None.
- sectionPlane() - Method in interface nxopen.features.TextBuilder
-
- SectionPlaneBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
-
Represents a plane which is used to cut sections on faces or facet bodies .
- SectionPlaneBuilder.PlaneType - Class in nxopen.geometricanalysis.sectionanalysis
-
The type of different section planes
- SectionPlaneData - Interface in nxopen.geometricutilities
-
Represents a Section Plane Data class
This class acts like a container to hold the data needed to create a plane.
- sectionPlaneEntity() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns
License requirements: ugweld ("UG WELD")
.
- sectionPlaneName() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the section plane name
License requirements: None.
- sectionPlaneNormal() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the section plane normal.
- sectionPlanes() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the selected planes
License requirements: None.
- SectionPlanesData() - Constructor for class nxopen.uf.UFCurve.SectionPlanesData
-
- SectionPlanesData(Tag[], int) - Constructor for class nxopen.uf.UFCurve.SectionPlanesData
-
- sectionPoint() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the origin point where the section will be located.
- sectionPrefs - Variable in class nxopen.uf.UFPlist.Prefs
-
- SectionPrefs() - Constructor for class nxopen.uf.UFTabnot.SectionPrefs
-
- SectionPrefs(UFTabnot.HeaderLocation, double, UFTabnot.OverflowDirection, double, UFTabnot.AttachPoint, boolean, double, UFTabnot.DisplayContinuationNote, String) - Constructor for class nxopen.uf.UFTabnot.SectionPrefs
-
- sectionProperties() - Method in interface nxopen.cae.BeamSection
-
Returns the section properties
License requirements: None.
- sectionPropertiesAtAftEnd() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the section properties at the aft end of the beam element.
- sectionPropertiesAtForeEnd() - Method in interface nxopen.cae.BeamElementInfo
-
Returns the section properties at the fore end of the beam element.
- SectionRadialData() - Constructor for class nxopen.uf.UFCurve.SectionRadialData
-
- SectionRadialData(Tag, Tag, double, double, double) - Constructor for class nxopen.uf.UFCurve.SectionRadialData
-
- sectionRebuild() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the section rebuild
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- sectionRebuildData() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the section rebuild data
License requirements: None.
- sectionRebuildData() - Method in interface nxopen.features.SweptBuilder
-
Returns the section rebuild data
License requirements: None.
- sectionRule() - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
- sectionRule() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the section rule
License requirements: None.
- sections() - Method in interface nxopen.BasePart
-
Returns the SectionCollection instance belonging to this part .
- sections() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the addendum sections to edit.
- sections() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the sections
License requirements: None.
- sections() - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder
-
Returns the section objects for lofting
License requirements: None.
- sections() - Method in interface nxopen.features.subdivision.SubdivisionSweepBuilder
-
Returns the section objects.
- SECTIONS_ALONG_CURVE - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.Types
-
Sections Along Path Type
- sectionScaling1() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the section scaling
License requirements: None.
- sectionScaling2() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the section scaling2
License requirements: None.
- sectionSeed - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames
-
prefix seed name for auto groups grouped by 1-D section
- sectionShape() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the section shape.
- sectionShape() - Method in interface nxopen.motion.SplineBeamBuilder
-
Returns the section shape
License requirements: mechanisms ("MECHANISMS")
.
- sectionShape() - Method in interface nxopen.tooling.RunnerBuilder
-
Returns the section shape type of runner.
- sectionSheetBodies() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns the status of section sheet bodies.
- sectionSheetBodies() - Method in interface nxopen.preferences.SectionViewPreferences
-
Returns the status of section sheet bodies.
- sectionSide() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Returns the section Side for the Dimple section.
- sectionSide() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the section side for the Drawn Cutout.
- sectionSide() - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Returns the side of the section on which the louver is created and width is measure.
- sectionSide() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the side of the section that the normal cutout removes material.
- sectionSketch() - Method in interface nxopen.features.EditCrossSectionBuilder
-
Returns the sketch which holds the section curves
License requirements: None.
- sectionsList() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the sections list which is required.
- sectionsPerDrawing() - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
Returns the sct per drawing
License requirements: None.
- sectionStartGuide() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the section start guide.
- SectionSurface - Interface in nxopen.features
-
Represents a section surface feature
To create or edit an instance of this class, use
SectionSurfaceBuilder
Created in NX6.0.0
- SectionSurfaceBuilder - Interface in nxopen.features
-
- SectionSurfaceBuilder.ControlRegionEnum - Class in nxopen.features
-
Deprecated.
This enum represents the type of the region where depth and skew can be applied
- SectionSurfaceBuilder.FlowDirectionEnum - Class in nxopen.features
-
Deprecated.
This enum represents the type of flow direction for the start/end of the section surface
- SectionSurfaceBuilder.SectionMethodCircularTangentEnum - Class in nxopen.features
-
Deprecated.
This enum represents the current types of section method for circular tangent method
- SectionSurfaceBuilder.SectionMethodFilletBridgeEnum - Class in nxopen.features
-
Deprecated.
This enum represents the current types of section method for fillet bridge method
- SectionSurfaceBuilder.SectionMethodRhoEnum - Class in nxopen.features
-
Deprecated.
This enum represents the current types of section method for section methods with rho law
- SectionSurfaceBuilder.Types - Class in nxopen.features
-
Deprecated.
This enum represents the current types of section surface methods
- SectionSurfaceBuilder.UDegreeEnum - Class in nxopen.features
-
Deprecated.
This enum represents the current types of section surface in u direction
- SectionSurfaceBuilderEx - Interface in nxopen.features
-
- SectionSurfaceBuilderEx.BodyType - Class in nxopen.features
-
Body Preference type.
- SectionSurfaceBuilderEx.CircularType - Class in nxopen.features
-
This enum represents the current modes of circular type section surfaces.
- SectionSurfaceBuilderEx.ConicType - Class in nxopen.features
-
This enum represents the current modes of conic type section surfaces.
- SectionSurfaceBuilderEx.ControlRegionType - Class in nxopen.features
-
Control Region type.
- SectionSurfaceBuilderEx.CubicType - Class in nxopen.features
-
This enum represents the current modes of cubic type section surfaces.
- SectionSurfaceBuilderEx.LinearType - Class in nxopen.features
-
This enum represents the current modes of linear type section surfaces.
- SectionSurfaceBuilderEx.SectionMethodCircleTangentType - Class in nxopen.features
-
Section method Circle Tangent type.
- SectionSurfaceBuilderEx.SectionMethodFilletBridgeType - Class in nxopen.features
-
Section method Fillet Bridge type.
- SectionSurfaceBuilderEx.SectionMethodRhoType - Class in nxopen.features
-
Section method Rho type.
- SectionSurfaceBuilderEx.SlopeControlType - Class in nxopen.features
-
Slope Control type.
- SectionSurfaceBuilderEx.Spine - Class in nxopen.features
-
Spine type.
- SectionSurfaceBuilderEx.SpineEndFlowType - Class in nxopen.features
-
Spine End Flow type.
- SectionSurfaceBuilderEx.SpineStartFlowType - Class in nxopen.features
-
Spine Start Flow type.
- SectionSurfaceBuilderEx.Types - Class in nxopen.features
-
This enum represents the current types of section surface methods.
- SectionSurfaceBuilderEx.UDegreeType - Class in nxopen.features
-
Surface Degree type.
- sectionSurfaceRebuildData() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the section surface rebuild data.
- sectionTemplateString() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the section template curve.
- sectionToProject() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the section to project
License requirements: None.
- sectionType() - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Returns the section type
License requirements: None.
- sectiontype - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndSectionValueData
-
The section type of this chain set collector
- sectionType() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the section type (profile or built up) for pillar system.
- sectionType() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the section type (profile or plate)
License requirements: None.
- sectionType() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the section type (profile or plate)
License requirements: None.
- sectionType() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the section type
License requirements: None.
- sectionType() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the section type.
- sectionType() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the creation method
License requirements: None.
- sectionType() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
- sectionType() - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder
-
Returns the section type (profile or plate)
License requirements: None.
- sectionType() - Method in interface nxopen.motion.StandardSectionBuilder
-
Returns the section type
License requirements: mechanisms ("MECHANISMS")
.
- sectionTypesInUserControl() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the flag to indicate if the section types have been modified by user.
- sectionVector() - Method in interface nxopen.motion.SplineBeamBuilder
-
Returns the section orientation vector
License requirements: mechanisms ("MECHANISMS")
.
- sectionVector() - Method in interface nxopen.tooling.RunnerBuilder
-
Returns the vector indicating the runner section direction.
- SectionView - Interface in nxopen.drawings
-
Represents a Section View.
- sectionView() - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
Returns the ship section view
License requirements: None.
- SectionViewBuilder - Interface in nxopen.drawings
-
- SectionViewBuilder - Interface in nxopen.features.shipdesign
-
- SectionViewBuilder.DirectionOptions - Class in nxopen.features.shipdesign
-
Settings to indicate the view direction
- SectionViewBuilder.PlaneTypes - Class in nxopen.features.shipdesign
-
Settings to indicate the plane type
- SectionViewBuilder.SectionCutType - Class in nxopen.drawings
-
Section Line Cut type
- SectionViewBuilder.SectionLineType - Class in nxopen.drawings
-
Section Line type
- SectionViewBuilder.SectionRuleOptions - Class in nxopen.features.shipdesign
-
Settings to indicate the section rule
- SectionViewBuilder.SectionViewModeType - Class in nxopen.drawings
-
Section Line Mode
- SectionViewBuilder.SymmetricalStructureOptions - Class in nxopen.features.shipdesign
-
Settings to indicate to show symmetrical structure
- SectionViewBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- sectionViewButtonClicked() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the section view button clicked attribute
License requirements: None.
- sectionViewMode() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the section line mode
License requirements: None.
- sectionViewNamePrefix() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the Section View name prefix
License requirements: None.
- SectionViewPreferences - Interface in nxopen.preferences
-
Represents set of Section View Preferences applicable to drafting views.
- SectionViewStyle - Interface in nxopen.drawings
-
Represents set of Section View Style Preferences applicable to drafting views.
- sectionViewTool() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the section view tool
License requirements: None.
- sectionViewType() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the section line type
License requirements: None.
- sectionWidth() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the section width.
- sectionXMax() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the section xmax
License requirements: None.
- sectionXMin() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the section xmin
License requirements: None.
- sectionYMax() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the section ymax
License requirements: None.
- sectionYMin() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the section ymin
License requirements: None.
- sectionZMax() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the section zmax
License requirements: None.
- sectionZMin() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the section zmin
License requirements: None.
- sectorId() - Method in interface nxopen.cae.PostSelectionEntity
-
Returns the node label selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- sectorIndex() - Method in interface nxopen.cae.CyclicSymmetricParameters
-
Returns the selected index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- sectorValue() - Method in interface nxopen.cae.CyclicSymmetricParameters
-
Returns the sector value enum
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- securityLogging() - Method in interface nxopen.pdm.SessionSettings
-
Returns a flag controlling Teamcenter security logging.
- secXorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the sec xorigin
License requirements: None.
- secYorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the sec yorigin
License requirements: None.
- secZorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the sec zorigin
License requirements: None.
- seeAlso - Variable in class nxopen.RuleManager.FunctionInformation
-
Other related functions, comma-separated list
- SEEBECK_COEFFICIENT - Static variable in class nxopen.cae.Result.Quantity
-
- seed - Variable in class nxopen.ApparentChainingRule.Data
-
The seed curve.
- SEED - Static variable in class nxopen.uf.UFSurfReg.Type
-
- SEED_CURVE - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.DrapingPathType
-
seed curve
- SEED_ELEMENT - Static variable in class nxopen.cae.ElementSplitBuilder.SplitMethodType
-
by vector comparison
- SEED_MESH - Static variable in class nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder.ConnectedElementScope
-
Limits check to only those beam elements in the mesh that contains the Seed Element
- SEED_MESH - Static variable in class nxopen.cae.modelcheck.AlignShellElementNormalBuilder.ConnectedElementScope
-
Limits check to only those shell elements in the mesh that contains the Seed Element
- SEED_POINT - Static variable in class nxopen.cae.Post.StreamlineSynchronization
-
- SeedAndPointData() - Constructor for class nxopen.FaceMergedRibFacesRule.SeedAndPointData
-
- seedCurve - Variable in class nxopen.CurveChainRule.Data
-
Seed curve
- seedCurve - Variable in class nxopen.CurveFeatureChainRule.Data
-
Seed curve
- seedCurve - Variable in class nxopen.CurveFeatureTangentRule.Data
-
Seed curve
- seedCurve - Variable in class nxopen.CurveTangentRule.Data
-
Seed curve
- seedDatumCsys() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the seed datum CSYS
License requirements: None.
- seedDlxFile() - Method in interface nxopen.blockstyler.SetList
-
Returns the SeedDlxFile as string
License requirements: None.
- seedEdge() - Method in interface nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder
-
Returns the seed edge
License requirements: None.
- seededges - Variable in class nxopen.cae.EdgePathMethod.SeedEdgesData
-
seed edges
- seededges - Variable in class nxopen.cae.EdgePathMethod.SeedsData
-
seed edges
- seedEdges - Variable in class nxopen.EdgeMultipleSeedTangentRule.Data
-
Seed edges
- SeedEdgesData() - Constructor for class nxopen.cae.EdgePathMethod.SeedEdgesData
-
- SeedEdgesData() - Constructor for class nxopen.cae.ElemEdgePathMethod.SeedEdgesData
-
- seedelemedges - Variable in class nxopen.cae.ElemEdgePathMethod.SeedEdgesData
-
seed element edges
- seedelemedges - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData
-
seed element edges
- seedElement() - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
Returns the seed element
License requirements: None.
- seedElement() - Method in interface nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder
-
Returns the seed element
License requirements: None.
- seedElement() - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
-
Returns the seed element
License requirements: None.
- seedFace() - Method in interface nxopen.cam.GeometrySet
-
Returns the seed face
License requirements: None.
- seedFace() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the seed face
License requirements: None.
- seedFace - Variable in class nxopen.FaceConnectedBlendRule.DefiningData
-
Seed face which creates this rule
- seedFace() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the seed face for the face chain
License requirements: None.
- seedFace() - Method in interface nxopen.features.PatchBuilder
-
Returns the seed face.
- seedFace() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the seed face of forming region.
- seedFace - Variable in class nxopen.uf.UFSf.AskIdealizeRegionData
-
- seedFace1() - Method in interface nxopen.weld.FilletBuilder
-
Returns the first seed face.
- seedFace1() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the top face on face1
License requirements: None.
- seedFace1() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the first seed face
License requirements: ugweld ("UG WELD")
.
- seedFace2() - Method in interface nxopen.weld.FilletBuilder
-
Returns the second seed face.
- seedFace2() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the bottom face from which the weld will be extruded towards the top
License requirements: None.
- seedFace2() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the second seed face
License requirements: ugweld ("UG WELD")
.
- seedFaces - Variable in class nxopen.uf.UFModl.DfoRegion
-
- seedFaces - Variable in class nxopen.uf.UFWave.AskLinkRegionSourcesData
-
- seedfacet - Variable in class nxopen.BrushFacetsRule.Data
-
the seed facet
- seedfacet - Variable in class nxopen.FineBrushFacetsRule.Data
-
the seed facet
- seedfacet - Variable in class nxopen.FloodFillFacetsRule.Data
-
seed facet for flood filled facet collection
- seedfacet - Variable in class nxopen.RoughBrushFacetsRule.Data
-
the seed facet
- seedMesh - Variable in class nxopen.uf.UFSf.AskMeshMatingConditionData
-
- seedObj - Variable in class nxopen.FaceRegionBoundaryRule.Data
-
Seed Face
- seedObj - Variable in class nxopen.RegionBoundaryRule.Data
-
Face or Sketch
- seedOnlyToggle() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the seedOnlyToggle, a logical flag to indicate if the we need only instances for the seed along the second direction.
- seedPoint - Variable in class nxopen.FaceRegionBoundaryRule.Data
-
Seed point
- seedPoint - Variable in class nxopen.RegionBoundaryRule.Data
-
Seed point
- seedPoint1() - Method in interface nxopen.weld.FilletBuilder
-
Returns the point on the first face.
- seedPoint1() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the point on the first face
License requirements: ugweld ("UG WELD")
.
- seedPoint2() - Method in interface nxopen.weld.FilletBuilder
-
Returns the point on the second face.
- seedPoint2() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the point on the second face
License requirements: ugweld ("UG WELD")
.
- seedPointInfo(double[], double[]) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Sets seed point information.
- seedpt - Variable in class nxopen.FaceMergedRibFacesRule.SeedAndPointData
-
Seed pick point point.
- seedReverseDirection() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the option that specifies whether to reverse the face normals of the extracted faces relative to the seed face chain
License requirements: None.
- SeedsData() - Constructor for class nxopen.cae.EdgePathMethod.SeedsData
-
- SeedsData() - Constructor for class nxopen.cae.ElemEdgePathMethod.SeedsData
-
- seedSelection() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the selected seed curves.
- seedstartnodes - Variable in class nxopen.cae.ElemEdgePathMethod.SeedEdgesData
-
seed start vertices
- seedstartnodes - Variable in class nxopen.cae.ElemEdgePathMethod.SeedsData
-
seed start vertices
- seedstartvertices - Variable in class nxopen.cae.EdgePathMethod.SeedEdgesData
-
seed start vertices
- seedstartvertices - Variable in class nxopen.cae.EdgePathMethod.SeedsData
-
seed start vertices
- seedWireframe - Variable in class nxopen.FollowFilletRule.Data
-
Seed wireframe
- seeThruAll() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not all less important
objects are de-emphasized.
- seeThruDeEmphasizedObjects() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not See-Thru is applied
to de-emphasized objects.
- seeThruPreview() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not all less important
objects are de-emphasized related to the Model Preview.
- seeThruSection() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not geometry on the section
plane is emphasized.
- seeThruStyle() - Method in interface nxopen.preferences.PartVisualizationEmphasis
-
Returns the See-Thru style that determines how translucency and color
are used to de-emphasize shaded geometry.
- seg - Variable in class nxopen.uf.UFRoute.CreateBendByRadiusData
-
- seg - Variable in class nxopen.uf.UFRoute.CreateBendByRatioData
-
- seg - Variable in class nxopen.uf.UFRoute.CreateBendByTableData
-
- segDirection() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Returns the steel insert seg directions
License requirements: ug_die_design ("Die Design")
.
- segementid - Variable in class nxopen.pid.EquipmentBuilder.InlineSymbolLocationData
-
- segementid - Variable in class nxopen.pid.PipeBuilder.StartTeeLocationData
-
- SEGMENT - Static variable in class nxopen.features.PolylineBuilder.MovementMethodType
-
Movement along a segment of the polyline
- SEGMENT - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Routing Segment.
- segment() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Returns the segment setting.
- Segment - Interface in nxopen.motion
-
Represents a segment, only creation is supported
This is created by road.
- segment - Variable in class nxopen.routing.BendReportManager.SegmentInformation
-
The segment itself.
- segment() - Method in interface nxopen.routing.RouteSegmentFont
-
Returns
License requirements: routing_base ("Routing Basic")
.
- segment - Variable in class nxopen.routing.SBendCorner.SBendData
-
S-Bend segment
- segment() - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
Returns the segment to subdivide
License requirements: routing_base ("Routing Basic")
.
- segmentationOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the segmentation option
License requirements: None.
- segmentBlendFaces() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the Segment blend to match face segments option
License requirements: None.
- SegmentBuilder - Interface in nxopen.motion
-
- SegmentBuilder.SplineDatatypeChoices - Class in nxopen.motion
-
data type attribute of the straight data
- SegmentBuilder.StraightTransitionTypeChoices - Class in nxopen.motion
-
data type attribute of the straight data
- SegmentBuilder.TypeChoices - Class in nxopen.motion
-
type attribute of the segment
- segmentBuilderList() - Method in interface nxopen.motion.RoadBuilder
-
Returns the segment builder list for the road object of type path
License requirements: mechanisms ("MECHANISMS")
.
- SegmentBuilderList - Interface in nxopen.motion
-
Represents a list of objects.
- SegmentCollection - Interface in nxopen.motion
-
Represents a collection of Segment objects, only creation is supported
To obtain an instance of this class, refer to
Road
Created in NX11.0.0
- segmentCollector() - Method in interface nxopen.mechanicalrouting.InsulationBuilder
-
Returns the routing object collector to collect the segments to assign Insulation to.
- segmentCollector() - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Returns the routing object collector that collects segments to assign stock to.
- segmentCollector() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the routing object collector to collect the segments to assign overstock to.
- segmentCollector() - Method in interface nxopen.routing.SimplifyPathBuilder
-
Returns the routing object collector that collects the segments to simplify.
- segmentCollector() - Method in interface nxopen.routing.SpaceReservationBuilder
-
Returns the routing segment collector
License requirements: routing_base ("Routing Basic")
.
- segmentCollector() - Method in interface nxopen.routing.StockBuilder
-
Returns the routing object collector that collects segments to assign stock to.
- segmentCollector() - Method in interface nxopen.routing.StockTransitionBuilder
-
Returns the segment collector
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- SegmentConstraintsData() - Constructor for class nxopen.AutomaticTraceline.SegmentConstraintsData
-
- SEGMENTED - Static variable in class nxopen.HumanData.AppearanceType
-
- segmentEdges() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Returns the list of segment edges that represent a segment
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- segmentEdges() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Returns the list of segment edges that represent a segment
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- segmentid - Variable in class nxopen.diagramming.LeaderLineBuilder.TerminatorData
-
- segmentIdentifier() - Method in interface nxopen.diagramming.ConnectionLocationBuilder
-
Returns the segment identifier.
- segmentIndices - Variable in class nxopen.AutomaticTraceline.SegmentConstraintsData
-
Segment indices
- SegmentInformation() - Constructor for class nxopen.routing.BendReportManager.SegmentInformation
-
- SegmentInformation(Stock, Curve, boolean, double, ControlPoint, ControlPoint, BendCorner, double, Point3d, Vector3d, Vector3d, Point3d, Point3d) - Constructor for class nxopen.routing.BendReportManager.SegmentInformation
-
Constructor for the SegmentInformation object.
- segmentLength() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Returns the segment length setting.
- segmentLength() - Method in interface nxopen.weld.FilletBuilder
-
Returns the linear dimension length indicates segment length for each weld.
- segmentLength() - Method in interface nxopen.weld.GrooveBuilder
-
- segmentLength() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the length of weld
License requirements: ugweld ("UG WELD")
.
- segmentLengthIncrement() - Method in interface nxopen.formboard.LayoutLengthOptions
-
Returns the segment length increment.
- segmentLengths - Variable in class nxopen.AutomaticTraceline.SegmentConstraintsData
-
Segment lengths
- segmentList() - Method in interface nxopen.die.DrawBeadBuilder
-
- segmentList() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the cable segment list.
- segmentList() - Method in interface nxopen.routing.TangencyGroupBuilder
-
Returns the segment current editing.
- segmentLocation() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder
-
Returns the segment location
License requirements: None.
- segmentLocationForSecondLeg() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder
-
Returns the segment location to add segments to revolved section line second leg
License requirements: None.
- segmentManager() - Method in interface nxopen.Part
-
Returns the SegmentManager for this part .
- SegmentManager - Interface in nxopen.routing
-
Contains the type of the routing part as well as the Collection objects for creating/iterating
over routing objects.
- SegmentManager.SubdivideOption - Class in nxopen.routing
-
Contains subdivide segment method information.
- SegmentManager.SubdivideSpacing - Class in nxopen.routing
-
Specifies spacing option for subdivide segment.
- segmentName - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment name
- segmentNumber - Variable in class nxopen.uf.UFDrf.SymbolInstance
-
- segmentPair() - Method in interface nxopen.routing.AssignDiscontinuityBuilder
-
Returns the segment pairs selected for the assigning Discontinuity
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- segmentPairBuilder() - Method in interface nxopen.routing.AssignDiscontinuityBuilder
-
Creates a SegmentPairBuilder used to create list item for AssignDiscontinuity
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- SegmentPairBuilder - Interface in nxopen.routing
-
- segmentPnts - Variable in class nxopen.uf.UFDrf.DraftAidLine
-
- segmentRoundingMethod() - Method in interface nxopen.formboard.LayoutLengthOptions
-
Returns the rounding method to apply to segment lengths.
- segments() - Method in interface nxopen.cam.MillFormToolBuilder
-
Returns the Segments
License requirements: None.
- segments() - Method in interface nxopen.facet.DivideFacetFaceBuilder
-
Returns the number of segments used for advanced fitting
License requirements: None.
- segments() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the segments
License requirements: None.
- segments() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the segments
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- SEGMENTS - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
- segments() - Method in interface nxopen.geometricutilities.CurveFitData
-
Returns the fitting segments
License requirements: None.
- segments() - Method in interface nxopen.motion.Road
-
- SEGMENTS - Static variable in class nxopen.motion.RoadBuilder.PathDatatypeChoices
-
Segments
- segments() - Method in interface nxopen.routing.SegmentManager
-
All Segment types collection .
- segments - Variable in class nxopen.uf.UFCurve.CreateSimplifiedCurveData
-
- segments - Variable in class nxopen.uf.UFDraw.AskSimplifiedCurveData
-
- segments - Variable in class nxopen.uf.UFDraw.CreateSimplifiedCurveData
-
- segments - Variable in class nxopen.uf.UFRoute.AskRcpSegmentsData
-
- segments - Variable in class nxopen.uf.UFRoute.AskRcpSegsData
-
- segments - Variable in class nxopen.uf.UFRoute.AskStockSegmentsData
-
- segments - Variable in class nxopen.uf.UFRoute.AskWireSegmentsData
-
- segmentsCount - Variable in class nxopen.uf.UFCurve.CreateSimplifiedCurveData
-
- segmentsOrPatches() - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
Returns the patches
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- segmentsParent() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the segments parent builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- segmentType() - Method in interface nxopen.drawings.SectionLineSegmentPointBuilder
-
Returns the segment type
License requirements: drafting ("DRAFTING")
.
- segmentType - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment type
- segmentType() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the segment type of a road segment
License requirements: mechanisms ("MECHANISMS")
.
- segPairList() - Method in interface nxopen.routing.AssignDiscontinuityBuilder
-
Returns the list of selected segments pairs
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- segPoint() - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Returns the steel insert seg point or plane
License requirements: ug_die_design ("Die Design")
.
- seid() - Method in interface nxopen.cae.PostSelectionEntity
-
Returns the super element id selected
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- SEL_RECIPE - Static variable in class nxopen.cae.CaeSetObjectSubType
-
sub type is selection recipe
- selBend() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the selection of bends.
- SELBOW - Static variable in class nxopen.routing.CornerTypeBuilder.Type
-
- selConnector() - Method in interface nxopen.linedesigner.DisconnectConnectionBuilder
-
Returns an API that gives connector
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- SELECT - Static variable in class nxopen.blockstyler.Wizard.SubNodeAction
-
Sub-node has been selected.
- SELECT - Static variable in class nxopen.cae.DurabilityEventOverridesBuilder.UseElementsEnum
-
Select
- SELECT - Static variable in class nxopen.cae.LaminateSineEventBuilder.NaturalFrequeciesEnum
-
Manually select natural frequencies
- select(Action) - Method in interface nxopen.cae.qualityaudit.ActionList
-
Select the specified action to be used in the quality audit.
- select(NXObject) - Method in interface nxopen.cae.qualityaudit.InputList
-
Mark the specified object to be included in the quality audit actions.
- SELECT - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.FaceSelectionSpecification
-
- select() - Method in interface nxopen.tooldesigner.VolumeFilterBuilder
-
Returns the select
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- SELECT - Static variable in class nxopen.tooling.BlankGeneratorBuilder.CreateBlankType
-
Select blank
- select3dModel() - Method in interface nxopen.ame.Snap3DModelsBuilder
-
Returns the Target node selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SELECT_BOX - Static variable in class nxopen.uf.UFDisp.Context
-
- SELECT_COMPONENT - Static variable in class nxopen.features.vehicledesign.BaseDataSourceBuilder.BaseDataSourceOption
-
Component which contains Base Data feature group.
- SELECT_CYLINDRICAL - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- SELECT_DIRECTION - Static variable in class nxopen.cam.InspectionUVGridBuilder.SphereAxisType
-
User specified direction
- SELECT_EDGE - Static variable in class nxopen.tooling.WireHoleBuilder.Types
-
- SELECT_EXISTING - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.DesignCreationType
-
Design feature is selected from existing features
- SELECT_EXPRESSION - Static variable in class nxopen.annotations.SuppressPMIBuilder.SuppressionMethodType
-
Allows selection of an expression to control the
suppression of the selected PMI objects.
- SELECT_FACES - Static variable in class nxopen.tooling.TrimMoldComponentsBuilder.TrimSurfaceName
-
Select faces
- SELECT_LOCATION - Static variable in class nxopen.die.DieLocationBuilder.LocationType
-
Select the point to be used.
- SELECT_OBJECT - Static variable in class nxopen.ame.ExtractAttributeBuilder.Type
-
- SELECT_OBJECT - Static variable in class nxopen.ame.ReferenceObjectBuilder.SourceSelectionType
-
- SELECT_OBJECT - Static variable in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectOptions
-
Select object
- SELECT_OBJECT - Static variable in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectOptions
-
Select object
- SELECT_OBJECT - Static variable in class nxopen.geometricutilities.TrimCurveBoundingObjectBuilder.Method
-
- SELECT_ORIGIN - Static variable in class nxopen.mechatronics.ECADImportBuilder.PositionMode
-
Deprecated.
Select Origin
- SELECT_ORIGIN - Static variable in class nxopen.tooling.SIZERImportBuilder.PositionMode
-
Select Origin
- SELECT_PLANE - Static variable in class nxopen.geometricutilities.TrimCurveBoundingObjectBuilder.Method
-
- SELECT_POINT - Static variable in class nxopen.features.DivideCurveBuilder.CornerOption
-
Screen Position
- SELECT_POINT - Static variable in class nxopen.features.DivideCurveBuilder.KnotPointOption
-
Screen Position
- SELECT_RECTANGULAR - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- SELECT_SHEET_BODY - Static variable in class nxopen.tooling.TrimMoldComponentsBuilder.TrimSurfaceName
-
Select sheet body
- SELECT_SING - Static variable in class nxopen.uf.UFDisp.Context
-
- SELECT_SPHERICAL - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- SELECT_TEMPLATE - Static variable in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType
-
Populate Part already created in Teamcenter
- SELECTABLE - Static variable in class nxopen.layer.State
-
Objects on the layer are selectable
- SelectableTableEditorTesterBuilder - Interface in nxopen.tooldesigner
-
A class that used for align the model to the product
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectableTableEditorTesterBuilder
Created in NX11.0.1
- SelectAdapterSignal - Interface in nxopen.mechatronics
-
Represents a single object selection.
- SelectAdapterSignal.ValueData - Class in nxopen.mechatronics
-
- SelectAdapterSignal.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics
-
- SelectAdapterSignal.ValueWithSnapData - Class in nxopen.mechatronics
-
- selectAdjacentSurface() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the select adjacent surface
License requirements: None.
- selectAll() - Method in interface nxopen.cae.qualityaudit.ActionList
-
Select all the actions available.
- selectAll() - Method in interface nxopen.cae.qualityaudit.InputList
-
- selectAll() - Method in interface nxopen.tooling.UnusedFileManagementBuilder
-
Returns the select all option.
- selectAllElements() - Method in interface nxopen.cae.LaminateElementFilterBuilder
-
Returns the select all elements option
License requirements: nx_lam_composites ("Laminate Composites")
.
- selectAllEntities() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
This command selects all the entities.
- selectAllFields() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
This command selects all the fields.
- selectAllGouges() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Select all gouges
License requirements: cam_base ("CAM BASE")
.
- selectAllPlies() - Method in interface nxopen.cae.LaminatePlyFilterBuilder
-
Returns the select all plies option
License requirements: nx_lam_composites ("Laminate Composites")
.
- selectAllProjectFeatureCurves() - Method in interface nxopen.ConvertToFromReferenceBuilder
-
Returns the projected curve flag.
- selectAllScrapsToggle() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the select all scraps option for creating all punches at a time.
- selectallsubcases - Variable in class nxopen.cae.LaminatePostReportBuilder.SelectedSolutionsData
-
- SelectAMEBaseNode - Interface in nxopen.ame
-
Represents a single object selection.
- SelectAMEBaseNode.ValueData - Class in nxopen.ame
-
- SelectAMEBaseNode.ValueWithCaeSetObjectInfoData - Class in nxopen.ame
-
- SelectAMEBaseNode.ValueWithSnapData - Class in nxopen.ame
-
- SelectAMEBaseNodeList - Interface in nxopen.ame
-
Represents a list of objects on a selection list.
- SelectAMEExtendedObject - Interface in nxopen.ame
-
Represents a single object selection.
- SelectAMEExtendedObject.ValueData - Class in nxopen.ame
-
- SelectAMEExtendedObject.ValueWithCaeSetObjectInfoData - Class in nxopen.ame
-
- SelectAMEExtendedObject.ValueWithSnapData - Class in nxopen.ame
-
- SelectAMEPort - Interface in nxopen.ame
-
Represents a single object selection.
- SelectAMEPort.ValueData - Class in nxopen.ame
-
- SelectAMEPort.ValueWithCaeSetObjectInfoData - Class in nxopen.ame
-
- SelectAMEPort.ValueWithSnapData - Class in nxopen.ame
-
- SelectAnalyticalContactProperty - Interface in nxopen.motion
-
Represents a single object selection.
- SelectAnalyticalContactProperty.ValueData - Class in nxopen.motion
-
- SelectAnalyticalContactProperty.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectAnalyticalContactProperty.ValueWithSnapData - Class in nxopen.motion
-
- selectAndHighlightBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
SelectAndHighlightBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- SelectAndHighlightBuilder - Interface in nxopen.ame
-
- SelectAndHighlightBuilder.SelType - Class in nxopen.ame
-
possible choices for selecting of navigator objects in a set
- SelectAnnotation - Interface in nxopen.annotations
-
Represents a single object selection.
- SelectAnnotation.ValueData - Class in nxopen.annotations
-
- SelectAnnotation.ValueWithCaeSetObjectInfoData - Class in nxopen.annotations
-
- SelectAnnotation.ValueWithSnapData - Class in nxopen.annotations
-
- SelectAnnotationList - Interface in nxopen.annotations
-
Represents a list of objects on a selection list.
- selectArc() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the selected Arc
License requirements: None.
- selectAspect() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the selected aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SelectAspectNode - Interface in nxopen.ame
-
Represents a single object selection.
- SelectAspectNode.ValueData - Class in nxopen.ame
-
- SelectAspectNode.ValueWithCaeSetObjectInfoData - Class in nxopen.ame
-
- SelectAspectNode.ValueWithSnapData - Class in nxopen.ame
-
- selectAssemblyInFolder() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the select assembly in folder
License requirements: None.
- selectAssemblyToExport() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the select assembly to export
License requirements: None.
- selectAssociationInsert() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the selection of the inserts to create association.
- selectAssociationInsert() - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder
-
Returns the selection of the inserts to create association.
- selectAssociationScrap() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the selection of the scrap to create association.
- selectAssociationScrap() - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder
-
Returns the selection of the scrap to create association.
- selectAttributeSpreadsheet() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the selected attribute spreadsheet
License requirements: None.
- selectAttributeSpreadsheet() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the selected attribute spreadsheet
License requirements: None.
- selectAxisControl() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the select axis control.
- SelectBaseCustomSymbolList - Interface in nxopen.annotations
-
Represents a list of objects on a selection list.
- selectBaseDefinition() - Method in interface nxopen.ame.AssignTypeBuilder
-
Returns the base definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectBaseDefinitionNode() - Method in interface nxopen.ame.SelectionBaseDefinitionBuilder
-
Returns the builder for selected base definition node
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SelectBaseDefinitionNodeBuilder - Interface in nxopen.ame
-
Builder for selecting base definition node from navigators
This object does not need a creator
.
- selectBaseFace() - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder
-
Returns the select base face for clean-up utility
License requirements: None.
- SelectBaseSection - Interface in nxopen.motion
-
Represents a single object selection.
- SelectBaseSection.ValueData - Class in nxopen.motion
-
- SelectBaseSection.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectBaseSection.ValueWithSnapData - Class in nxopen.motion
-
- selectBend() - Method in interface nxopen.features.sheetmetal.EditBendBuilder
-
Returns the select bend
License requirements: None.
- selectBend() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the selection list that stores bend faces.
- selectBlank() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Create a blank by selecting a blank.
- SelectBlend - Interface in nxopen.modldirect
-
Represents a
SelectBlend
Allows user to specify blend faces.
- selectBlock(String, String, boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Selects or deselects a block.
- selectBodies() - Method in interface nxopen.die.DieBooleanBuilder
-
Returns the bodies to be booleaned to the main feature body
License requirements: None.
- selectBodies() - Method in interface nxopen.tooling.CopySolidBuilder
-
Returns the solid bodies selected by user
License requirements: None.
- selectBody() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
-
Returns the selected body
License requirements: nx_masterfem ("Finite Element Modeling")
.
- SelectBody - Interface in nxopen
-
Represents a single object selection.
- selectBody() - Method in interface nxopen.tooling.MoldInsertBuilder
-
Returns the select body
License requirements: None.
- selectBody() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the select body
License requirements: None.
- selectBody() - Method in interface nxopen.tooling.ProfileSplitBuilder
-
Returns the selected body to be splitted
License requirements: None.
- selectBody() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the selected body to calculate a bounding box for stock size.
- selectBody() - Method in interface nxopen.weld.UserDefinedWeldBuilder
-
Returns the select body.
- SelectBody.ValueData - Class in nxopen
-
- SelectBody.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectBody.ValueWithSnapData - Class in nxopen
-
- selectBodyAccordingToAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the select body according to attribute
License requirements: None.
- SelectBodyFeatureList - Interface in nxopen.features
-
Represents a list of objects on a selection list.
- SelectBodyList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectBodyOption() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
-
Returns the select body option for different ways of body select method
License requirements: None.
- selectBotFace() - Method in interface nxopen.tooling.SubInsertBuilder
-
Returns the bottom face to position the sub-insert
License requirements: None.
- selectBottomParts() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the collector containing the secondary bodies the bead is attached to.
- selectBoundaryEdge1() - Method in interface nxopen.features.StepBuilder
-
Returns the selected boundary edge 1
License requirements: None.
- selectBoundaryEdge2() - Method in interface nxopen.features.StepBuilder
-
Returns the selected boundary edge2
License requirements: None.
- selectBoundaryEdges() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Returns the select boundary edges
License requirements: None.
- selectBoundaryFace1() - Method in interface nxopen.features.StepBuilder
-
Returns the selected boundary face 1
License requirements: None.
- selectBoundaryFace2() - Method in interface nxopen.features.StepBuilder
-
Returns the selected boundary face 2
License requirements: None.
- selectBoundaryFaces() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Returns the select boundary faces
License requirements: None.
- selectBoundaryPlane1() - Method in interface nxopen.features.StepBuilder
-
Returns the selected boundary plane 1
License requirements: None.
- selectBoundaryPlane2() - Method in interface nxopen.features.StepBuilder
-
Returns the selected boundary plane 2
License requirements: None.
- selectBoundarySection1() - Method in interface nxopen.features.StepBuilder
-
Returns the selected boundary section 1
License requirements: None.
- selectBoundarySection2() - Method in interface nxopen.features.StepBuilder
-
Returns the selected boundary section2
License requirements: None.
- selectBoundBox() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the selected bounding box.
- selectBranch() - Method in interface nxopen.formboard.OrientBranchBuilder
-
Returns the user selected branch
ISegment
for rotation.
- SelectCAEBody - Interface in nxopen.cae
-
Represents a single object selection.
- SelectCAEBody.ValueData - Class in nxopen.cae
-
- SelectCAEBody.ValueWithCaeSetObjectInfoData - Class in nxopen.cae
-
- SelectCAEBody.ValueWithSnapData - Class in nxopen.cae
-
- SelectCAEBodyList - Interface in nxopen.cae
-
Represents a list of objects on a selection list.
- SelectCAEEdge - Interface in nxopen.cae
-
Represents a single object selection.
- SelectCAEEdge.ValueData - Class in nxopen.cae
-
- SelectCAEEdge.ValueWithCaeSetObjectInfoData - Class in nxopen.cae
-
- SelectCAEEdge.ValueWithSnapData - Class in nxopen.cae
-
- SelectCAEEdgeList - Interface in nxopen.cae
-
Represents a list of objects on a selection list.
- SelectCAEFace - Interface in nxopen.cae
-
Represents a single object selection.
- SelectCAEFace.ValueData - Class in nxopen.cae
-
- SelectCAEFace.ValueWithCaeSetObjectInfoData - Class in nxopen.cae
-
- SelectCAEFace.ValueWithSnapData - Class in nxopen.cae
-
- SelectCAEFaceList - Interface in nxopen.cae
-
Represents a list of objects on a selection list.
- selectCageObject() - Method in interface nxopen.features.subdivision.SubdivisionDeleteCageBuilder
-
- SelectCageObjectData - Interface in nxopen.features.subdivision
-
Represents subdivision cage topology object selection.
- selectCallout() - Method in interface nxopen.annotations.CalloutGroupBuilder
-
Returns the selected callout
License requirements: None.
- selectCamDirection() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the selected cam direction.
- SelectCAMFeature - Interface in nxopen.cam
-
Represents a single object selection.
- SelectCAMFeature.ValueData - Class in nxopen.cam
-
- SelectCAMFeature.ValueWithCaeSetObjectInfoData - Class in nxopen.cam
-
- SelectCAMFeature.ValueWithSnapData - Class in nxopen.cam
-
- SelectCAMFeatureList - Interface in nxopen.cam
-
Represents a list of objects on a selection list.
- SelectCartesianCoordinateSystem - Interface in nxopen
-
Represents a single object selection.
- SelectCartesianCoordinateSystem.ValueData - Class in nxopen
-
- SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectCartesianCoordinateSystem.ValueWithSnapData - Class in nxopen
-
- selectCavity() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the select cavity
License requirements: None.
- selectChain() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the selected entities for performing the radius reduction operation, which selected by "Select Faces by Chain" and "Single Selection"
License requirements: None.
- selectClassification() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the selected classification
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectClassification() - Method in interface nxopen.ame.LayoutDefinitionBuilder
-
Returns the selected classification
License requirements: None.
- selectClassification() - Method in interface nxopen.ame.ProductSelectionBuilder
-
Returns the selected classification
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectClassification() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Returns the selected classification
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SelectClassificationBuilder - Interface in nxopen.ame
-
Select a part from the reuse library .
- SelectClassificationBuilder - Interface in nxopen.mechatronics
-
Select a classification from the reuse library.
- selectClassificationFromTree() - Method in interface nxopen.ame.CreateDefinitionBuilder
-
Returns the select classification from tree builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectClassificationFromTree() - Method in interface nxopen.ame.CreateProductBuilder
-
- SelectClassificationFromTreeBuilder - Interface in nxopen.ame
-
Select Type from the Classification Library
This object does not need a creator.
- SelectCollisionSensor - Interface in nxopen.mechatronics
-
Represents a single object selection.
- SelectCollisionSensor.ValueData - Class in nxopen.mechatronics
-
- SelectCollisionSensor.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics
-
- SelectCollisionSensor.ValueWithSnapData - Class in nxopen.mechatronics
-
- SelectCollisionSensorList - Interface in nxopen.mechatronics
-
Represents a list of objects on a selection list.
- selectColorSpreadsheet() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the face color spreadsheet
License requirements: None.
- selectComponent(String) - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
Stores index of the custom symbol component for editing display
License requirements: drafting ("DRAFTING")
.
- selectComponent() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns a list of the selected component as relink target scope.
- SelectComponent - Interface in nxopen.assemblies
-
Represents a single object selection.
- SelectComponent - Interface in nxopen.layout2d
-
Represents a single object selection.
- selectComponent(String) - Method in interface nxopen.sim.SinumerikCaPlaceholderBuilder
-
The select placeholder tools component
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- selectComponent() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the select target component in which to design backing pad
License requirements: None.
- selectComponent() - Method in interface nxopen.tooling.BomBuilder
-
Returns the select component needed to get stocksize
License requirements: None.
- selectComponent() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the selected component to assign to a designer.
- selectComponent() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the selected objects
License requirements: None.
- selectComponent() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the select component
License requirements: None.
- selectComponent() - Method in interface nxopen.tooling.SplitInsertBuilder
-
Returns the select component
License requirements: None.
- SelectComponent.ValueData - Class in nxopen.assemblies
-
- SelectComponent.ValueData - Class in nxopen.layout2d
-
- SelectComponent.ValueWithCaeSetObjectInfoData - Class in nxopen.assemblies
-
- SelectComponent.ValueWithCaeSetObjectInfoData - Class in nxopen.layout2d
-
- SelectComponent.ValueWithSnapData - Class in nxopen.assemblies
-
- SelectComponent.ValueWithSnapData - Class in nxopen.layout2d
-
- selectComponentAccordingToAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the objects according to attributes
License requirements: None.
- SelectComponentList - Interface in nxopen.assemblies
-
Represents a list of objects on a selection list.
- SelectComponentList - Interface in nxopen.layout2d
-
Represents a list of objects on a selection list.
- selectComponents() - Method in interface nxopen.tooling.BomListBuilder
-
Returns the select component needed to get stocksize
License requirements: None.
- selectComponents() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Returns the selection of components to be added to or removed from a changeover.
- selectComponentSource() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns a list of the selected component as relink source scope.
- selectComponentToRename() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the select component to rename
License requirements: None.
- selectConehead(String, int, double[], double[], String[], UFDisp.ConeheadAttrbSTag[], double, int) - Method in interface nxopen.uf.UFUi
-
- SelectConeheadData() - Constructor for class nxopen.uf.UFUi.SelectConeheadData
-
- selectConnectParts() - Method in interface nxopen.weld.UserDefinedWeldBuilder
-
Returns the select connect parts.
- selectControlPoint() - Method in interface nxopen.routing.CopeCornerBuilder
-
- SelectControlPoint - Interface in nxopen.routing
-
Represents a single object selection.
- SelectControlPoint.ValueData - Class in nxopen.routing
-
- SelectControlPoint.ValueWithCaeSetObjectInfoData - Class in nxopen.routing
-
- SelectControlPoint.ValueWithSnapData - Class in nxopen.routing
-
- SelectControlPort - Interface in nxopen.motion
-
Represents a single object selection.
- SelectControlPort.ValueData - Class in nxopen.motion
-
- SelectControlPort.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectControlPort.ValueWithSnapData - Class in nxopen.motion
-
- SelectCoordinateSystem - Interface in nxopen
-
Represents a single object selection.
- SelectCoordinateSystem.ValueData - Class in nxopen
-
- SelectCoordinateSystem.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectCoordinateSystem.ValueWithSnapData - Class in nxopen
-
- SelectCoordinateSystemList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectCopeStock() - Method in interface nxopen.routing.AssignCornerBuilder
-
Returns the user selected correct object where correct object is
Stock
and
ISegment
.
- selectCopeStock() - Method in interface nxopen.routing.CopeCornerBuilder
-
- selectCorner() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the selected corner.
- selectCsys() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the select csys
License requirements: None.
- selectCSYSFace() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the select csysface (only used for: SpecifyCSYS)
License requirements: None.
- selectCSYSFace() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the selection object for the target face.
- selectCSYSFace() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder
-
Returns the select csysface
License requirements: None.
- selectCSYSFace() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
Returns the selection object for the target face.
- selectCurve() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the select curve
License requirements: None.
- SelectCurve - Interface in nxopen
-
Represents a single object selection.
- selectCurve() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the select curve
License requirements: None.
- selectCurve() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the select curve
License requirements: None.
- SelectCurve.ValueData - Class in nxopen
-
- SelectCurve.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectCurve.ValueWithSnapData - Class in nxopen
-
- SelectCurveList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectCurves(NXObject[]) - Method in interface nxopen.features.CurveFinderBuilder
-
Adds curves to collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- selectCurves() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the curve selection for point insertion
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- selectCurves() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the select curves
License requirements: None.
- selectCurves() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the select curves
License requirements: None.
- selectCutCurves() - Method in interface nxopen.FlatteningBuilder
-
- selectCylindricalFace() - Method in interface nxopen.annotations.RegionBuilder
-
- selectDataFile() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the select data file
License requirements: None.
- selectDatasetsName() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the box list selected sets name
License requirements: None.
- SelectDatumCsysList - Interface in nxopen.features
-
Represents a list of objects on a selection list.
- SelectDatumPin - Interface in nxopen.weld
-
Represents a single object selection.
- SelectDatumPin.ValueData - Class in nxopen.weld
-
- SelectDatumPin.ValueWithCaeSetObjectInfoData - Class in nxopen.weld
-
- SelectDatumPin.ValueWithSnapData - Class in nxopen.weld
-
- SelectDatumPlane - Interface in nxopen
-
Represents a single object selection.
- SelectDatumPlane.ValueData - Class in nxopen
-
- SelectDatumPlane.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectDatumPlane.ValueWithSnapData - Class in nxopen
-
- SelectDatumPlaneList - Interface in nxopen
-
Represents a list of objects on a selection list.
- SelectDatumsBuilder - Interface in nxopen.tooldesigner
-
SelectDatumsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectDatumsBuilder
Default values.
- SelectDatumsBuilder.ConesDir - Class in nxopen.tooldesigner
-
Represents the cones direction options
- SelectDatumsBuilder.DatumCleanAPINames - Class in nxopen.tooldesigner
-
Represents the attribute to clean options
- SelectDatumsBuilder.SearchOption - Class in nxopen.tooldesigner
-
Represents search options
- SelectDatumsBuilder.Type - Class in nxopen.tooldesigner
-
SEARCH TYPES Names
- SelectDatumSurface - Interface in nxopen.weld
-
Represents a single object selection.
- SelectDatumSurface.ValueData - Class in nxopen.weld
-
- SelectDatumSurface.ValueWithCaeSetObjectInfoData - Class in nxopen.weld
-
- SelectDatumSurface.ValueWithSnapData - Class in nxopen.weld
-
- selectDevice(ListingWindow.DeviceType, String) - Method in interface nxopen.ListingWindow
-
Changes where the listing window output is sent.
- selectDieInsertForCavity() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the select die insert for cavity.
- selectDieInsertOutline() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the select die insert outline
License requirements: None.
- selectDieInsertOutline() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the select die insert outline.
- selectDieTip() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the selected die tip.
- SelectDimension - Interface in nxopen.annotations
-
Represents a single object selection.
- SelectDimension.ValueData - Class in nxopen.annotations
-
- SelectDimension.ValueWithCaeSetObjectInfoData - Class in nxopen.annotations
-
- SelectDimension.ValueWithSnapData - Class in nxopen.annotations
-
- SelectDisplayableObject - Interface in nxopen
-
Represents a single object selection.
- SelectDisplayableObject.ValueData - Class in nxopen
-
- SelectDisplayableObject.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectDisplayableObject.ValueWithSnapData - Class in nxopen
-
- SelectDisplayableObjectList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectDivideLocation(Point3d) - Method in interface nxopen.features.TrimCurve2Builder
-
The function selects the divide location.
- selectDividingObject() - Method in interface nxopen.features.DividefaceBuilder
-
Returns the Select Dividing Objects
License requirements: None.
- SelectDividingObjectBuilder - Interface in nxopen.geometricutilities
-
Represents the dividing tool block for dividing face .
- SelectDividingObjectBuilder.IsoparametricDirectionType - Class in nxopen.geometricutilities
-
Represents the direction of isoparametric curve
- SelectDividingObjectBuilder.ToolType - Class in nxopen.geometricutilities
-
Represents the Dividing Tool types
- selectDraftingSheet() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
Returns the select drafting sheet block.
- selectDraftingView() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
Returns the select drafting view block
License requirements: None.
- SelectDraftingView - Interface in nxopen.drawings
-
Represents a single object selection.
- SelectDraftingView.ValueData - Class in nxopen.drawings
-
- SelectDraftingView.ValueWithCaeSetObjectInfoData - Class in nxopen.drawings
-
- SelectDraftingView.ValueWithSnapData - Class in nxopen.drawings
-
- SelectDraftingViewList - Interface in nxopen.drawings
-
Represents a list of objects on a selection list.
- SelectDrawingRegion - Interface in nxopen.drawings
-
Represents a single object selection.
- SelectDrawingRegion.ValueData - Class in nxopen.drawings
-
- SelectDrawingRegion.ValueWithCaeSetObjectInfoData - Class in nxopen.drawings
-
- SelectDrawingRegion.ValueWithSnapData - Class in nxopen.drawings
-
- SelectDrawingView - Interface in nxopen.drawings
-
Represents a single object selection.
- SelectDrawingView.ValueData - Class in nxopen.drawings
-
- SelectDrawingView.ValueWithCaeSetObjectInfoData - Class in nxopen.drawings
-
- SelectDrawingView.ValueWithSnapData - Class in nxopen.drawings
-
- SelectDrawingViewList - Interface in nxopen.drawings
-
Represents a list of objects on a selection list.
- selectEClassNode() - Method in interface nxopen.ame.ExportEClassMappingBuilder
-
Returns the EClass node selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SELECTED - Static variable in class nxopen.annotations.PmiFilter.ComponentMethod
-
Specifies all components will be used
- SELECTED - Static variable in class nxopen.cae.modelcheck.CheckScope
-
check selected elements or nodes
- SELECTED - Static variable in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType
-
Defines a group by selection
- SELECTED - Static variable in class nxopen.cam.FeatureRecognitionBuilder.GeometrySearch
-
Search for features in user-selected geometry
- SELECTED - Static variable in class nxopen.features.SectionCurveBuilder.PlaneType
-
Planes are selected (not specified by
one of the following methods)
- SELECTED - Static variable in class nxopen.features.StudioXformBuilderEx.ProportionalPoleControlType
-
Only selected poles are moved
- SELECTED - Static variable in class nxopen.features.subdivision.DefineWorkRegionBuilder.WorkRegionDefinitionMethods
-
Specify a region as work region
- SELECTED - Static variable in class nxopen.features.subdivision.TransformCageData.FallOffMethodType
-
Selected vertices falloff
- SELECTED - Static variable in class nxopen.geometricutilities.PartModuleInputBuilder.ModifiableGeometryOptions
-
the faces/edges on shared body that are allowed for selection inside part module
- SELECTED - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Frame
-
Interference solids positioned relative to
user selected links.
- SELECTED - Static variable in class nxopen.routing.CustomManager.SelectionType
-
The objects were selected.
- selected - Variable in class nxopen.uf.UFUgmgr.AskVariantConfigurationsForDisplayData
-
- selected - Variable in class nxopen.uf.UFUgmgr.AskVariantConfigurationsForLoadData
-
- selected - Variable in class nxopen.uf.UFUi.DisplayMultiSelectMenuData
-
- selected() - Method in interface nxopen.weld.CharacteristicsBuilder
-
Returns the selected characteristic value.
- SELECTED_AND_CHILDREN - Static variable in class nxopen.annotations.PmiFilter.ComponentMethod
-
Specifies all components and their children will be used
- SELECTED_BLEND - Static variable in class nxopen.features.DeleteFaceBuilder.SetbackOptions
-
Cap by setback along the selected blend.
- SELECTED_BODIES - Static variable in class nxopen.cae.FemCreationOptions.UseBodiesOption
-
Use selected bodies from the cad part
- SELECTED_BODIES - Static variable in class nxopen.cae.FemPart.UseBodiesOption
-
Use selected bodies from the cad part
- SELECTED_CONNECTED_ELEMENTS - Static variable in class nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder.ElemSelectionMode
-
- SELECTED_CSYS - Static variable in class nxopen.features.ToolingBoxBuilder.RefCsysType
-
reference the selected csys
- SELECTED_CSYS - Static variable in class nxopen.tooling.StockSizeBuilder.RefCsysType
-
reference the selected csys
- SELECTED_CURVES - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.Types
-
selected curves
- SELECTED_FACES - Static variable in class nxopen.tooling.MWDefineRegionsBuilder.TranslucencyOptionType
-
Selected region faces
- SELECTED_IN_PREVIEW - Static variable in class nxopen.DxfdwgImporter.ConvLayoutsAs
-
Convert selected layouts
- SELECTED_MODELS - Static variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.Scope
-
Only takes selected elements into account while computing
- SELECTED_NODES - Static variable in class nxopen.cae.DisplayNodalCsysBuilder.NodesToDisplayType
-
- SELECTED_OBJECTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.CollectionRange
-
- SELECTED_OBJECTS - Static variable in class nxopen.display.PlanarShipGridBuilder.IntersectOption
-
only the selected objects will be searched for intersections with the plane
- SELECTED_OBJECTS - Static variable in class nxopen.ObjectSelector.Scope
-
Export selected objects from the part
- SELECTED_PARTS - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkScope
-
Indicate relink scope is selected parts
- SELECTED_VIEWS - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.Types
-
selected views
- selectedAlignment() - Method in interface nxopen.drawings.ViewAlignmentBuilder
-
Returns the selected alignment in builder.
- selectedArrangement() - Method in interface nxopen.assemblies.ArrangementsBuilder
-
Returns the selected arrangement
License requirements: None.
- selectedArrangementName() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Returns the name of the selected changeover arrangement.
- selectedAspectBlock() - Method in interface nxopen.ame.FunctionCallInstanceBuilder
-
Returns the EngObject selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedAspectNode() - Method in interface nxopen.ame.ImportEplanPageMacroBuilder
-
Returns the selected engineering object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedBaseDefinition() - Method in interface nxopen.ame.InsertObjectBuilder
-
Returns the selection base definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedBend() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the selection of bends.
- SelectedBendData() - Constructor for class nxopen.routing.EditBendAngleBuilder.SelectedBendData
-
- selectedBlock() - Method in interface nxopen.ame.FunctionCallInstanceBuilder
-
Returns the PlcBlock selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedBlock() - Method in interface nxopen.ame.InstanceDataBlockBuilder
-
Returns the PlcBlock selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedBody() - Method in interface nxopen.facet.CreateTransitionBuilder
-
Returns the selected facet body.
- selectedCircle() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the selected circle
License requirements: None.
- selectedClassification() - Method in interface nxopen.ame.ConfigureResultTableBuilder
-
Returns the selected classification
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedClassification() - Method in interface nxopen.ame.NamingRuleBuilder
-
Returns the Classification ID
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedComInterfaces() - Method in interface nxopen.ame.AssignSubnetBuilder
-
Returns the selection of com. interfaces to be assigned
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- selectedComponentList() - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder
-
Returns the selected components list
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- selectedComponents() - Method in interface nxopen.assemblies.MakeUniquePartBuilder
-
Returns the selected components to be made unique are returned.
- selectedComponents() - Method in interface nxopen.pdm.PartOperationMakeUniqueBuilder
-
Returns the selected components to be made unique are returned.
- selectedCone() - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
Returns the selected cone
License requirements: None.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
Returns the selected configuration name.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Returns the selected configuration name
License requirements: None.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.OPCUAClientBuilder
-
Returns the selected configuration name
License requirements: None.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.PlcSimAdvClientBuilder
-
Returns the selected configuration name.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.ProfinetClientBuilder
-
Returns the selected configuration name.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.SHMSignalClientBuilder
-
Returns the selected configuration name.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.TCPClientBuilder
-
Returns the selected configuration name.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.TCPSignalServerBuilder
-
Returns the selected configuration name.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.UDPSignalClientBuilder
-
Returns the selected configuration name.
- selectedConfigurationName() - Method in interface nxopen.mechatronics.UDPSignalServerBuilder
-
Returns the selected configuration name.
- selectedConfigurationPart() - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
Returns the selected configuration part.
- selectedConfigurationPart() - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Returns the selected configuration part
License requirements: None.
- selectedConfigurationPart() - Method in interface nxopen.mechatronics.OPCUAClientBuilder
-
Returns the selected configuration part
License requirements: None.
- selectedConfigurationPart() - Method in interface nxopen.mechatronics.PlcSimAdvClientBuilder
-
Returns the selected configuration part.
- selectedConfigurationPart() - Method in interface nxopen.mechatronics.ProfinetClientBuilder
-
Returns the selected configuration part.
- selectedConfigurationPart() - Method in interface nxopen.mechatronics.SHMSignalClientBuilder
-
Returns the selected configuration part.
- selectedConfigurationPart() - Method in interface nxopen.mechatronics.TCPClientBuilder
-
Returns the selected configuration part.
- selectedConfigurationPart() - Method in interface nxopen.mechatronics.UDPSignalClientBuilder
-
Returns the selected configuration part.
- selectedConstraintsList() - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder
-
Returns the selected constraint list
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- SelectedCoordinateSystemData() - Constructor for class nxopen.cae.ClippingParameters.SelectedCoordinateSystemData
-
- SelectedCoordinateSystemData() - Constructor for class nxopen.cae.ResultParameters.SelectedCoordinateSystemData
-
- selectedcsys() - Method in interface nxopen.cae.ResultVariable
-
Returns the Selected Co-ordinate System
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- selectedCurve() - Method in interface nxopen.facet.RemoveUndercutsBuilder
-
Returns the selected isocline curve.
- selectedCurve() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the flag of the selected curve
License requirements: None.
- selectedCurveCollector() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the selected curve for non planar face
License requirements: None.
- selectedCurves() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the selected curves
License requirements: None.
- selectedCurves() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
-
- selectedCurves() - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder
-
- selectedCurves() - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder
-
- selectedCurves() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the selected curves and/or edges
License requirements: None.
- selectedCustomSymbol() - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Returns the custom symbol selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedCylinder() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the selected cylinder
License requirements: None.
- selectedDesignerIndex() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the index of the selected designer.
- selectedDevices() - Method in interface nxopen.ame.ProductSelectionBuilder
-
Returns the selected devices
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedEclassNode() - Method in interface nxopen.ame.ManageEclassMappingBuilder
-
Returns the EClass node selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedEdges() - Method in interface nxopen.features.subdivision.SubdivisionFillBuilder
-
Returns the edges to form a face.
- selectedEdges1() - Method in interface nxopen.features.subdivision.SubdivisionSewCageBuilder
-
Returns the first set of edges
License requirements: None.
- selectedEdges2() - Method in interface nxopen.features.subdivision.SubdivisionSewCageBuilder
-
Returns the second set of edges
License requirements: None.
- selectedElementFaces() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
Returns the selected element face.
- selectedElements() - Method in interface nxopen.cae.RemoveRibsBuilder
-
Returns the selected elements
License requirements: None.
- selectedEngObject() - Method in interface nxopen.ame.CreatePmiNoteBuilder
-
Returns the selected engobject from project
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedEngObject() - Method in interface nxopen.ame.InstanceDataBlockBuilder
-
Returns the EngObject selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedEngObjectDefinition() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
Returns the selected eo def
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedEntityType() - Method in interface nxopen.cae.PostGraphBuilder
-
Returns the entity type of the tags of entities which passed using SetEntityObjects function
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- selectedExpression() - Method in interface nxopen.blockstyler.ChooseExpression
-
Returns the SelectedExpression
License requirements: None.
- selectedFace() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
Returns the selected face
License requirements: None.
- selectedFacet() - Method in interface nxopen.facet.AdjustMinimumRadiusBuilder
-
Returns the input facet body list.
- selectedFacetCollectionRule() - Method in interface nxopen.blockstyler.SelectFacetRegion
-
Returns the active facet collection rule
License requirements: None.
- selectedFBFromLibrary() - Method in interface nxopen.ame.InstanceDataBlockBuilder
-
Returns the library pou selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedFragmentTag() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the tag of selected fragment object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectEdge() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the select edge
License requirements: None.
- selectEdge() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder
-
Returns the select edge
License requirements: None.
- selectEdge() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
Returns the select limit edge
License requirements: None.
- SelectEdge - Interface in nxopen
-
Represents a single object selection.
- selectEdge() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the selected edge.
- selectEdge() - Method in interface nxopen.tooling.StripperVentingBuilder
-
Returns the select edge for cutting venting hole
License requirements: None.
- selectEdge() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Returns the selected edges and curves which will form the loop.
- selectEdge() - Method in interface nxopen.tooling.WireHoleBuilder
-
Returns the select edge
License requirements: None.
- selectEdge() - Method in interface nxopen.weld.UserDefinedWeldBuilder
-
Returns the select edge.
- SelectEdge.ValueData - Class in nxopen
-
- SelectEdge.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectEdge.ValueWithSnapData - Class in nxopen
-
- selectEdgeFaceBodyBlock() - Method in interface nxopen.cae.MergeFaceBuilder
-
Returns the geom selection for intersection curve
License requirements: None.
- SelectEdgeList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectedGeometry() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
Returns the selected geometry, consisting of two parallel lines
License requirements: None.
- selectedGeometry() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the selected cylinder geometry
License requirements: None.
- selectEdges() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the select curve
License requirements: None.
- selectedIcon() - Method in interface nxopen.blockstyler.Node
-
Returns the selected icon.
- selectedindex - Variable in class nxopen.mechatronics.TagTableBuilder.ListParameterData
-
- selectedInterfaceMemberPort() - Method in interface nxopen.ame.ConnectToLibraryItemBuilder
-
Returns the interface member selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedItemIndex() - Method in interface nxopen.blockstyler.ListBox
-
Returns the SelectedItemIndex.
- selectedItemString() - Method in interface nxopen.blockstyler.ListBox
-
Returns the SelectedItemString.
- selectedLoadTransferListItem() - Method in interface nxopen.cae.SimMotionLoadsBuilder
-
Returns the selected load transfer item
License requirements: None.
- selectedMaterial() - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
Returns the selected material.
- selectedMaterial() - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
Returns the selected material.
- selectedModelView() - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
Returns the list of selected Model View which are the source of PMI
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- selectedNode() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
Returns the destination nodes, Only available when the strain gage's placement type is
StrainGagePlacementType.NODE
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX6.0.0
- selectedNonPlanarFace() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the flag of the selected non-planar face
License requirements: None.
- selectedNum - Variable in class nxopen.uf.UFUi.SelectConeheadData
-
- selectedObject - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectSelectionData
-
The selected object.
- selectedObjects() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
Returns the select object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedObjects() - Method in interface nxopen.ame.CreateTemplateBuilder
-
Returns the selected objects from project
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedObjects() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the select object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedObjects() - Method in interface nxopen.ame.Manage2dSymbolsBuilder
-
Returns the Target node selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedObjects() - Method in interface nxopen.annotations.HoleTableBuilder
-
Returns the list of selected objects.
- selectedObjects() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Returns the selected object(s) list.
- selectedObjects() - Method in interface nxopen.assemblies.AssembliesParameterPropertiesBuilder
-
Returns the selected object(s) list.
- selectedObjects() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the selected object(s) list.
- selectedObjects() - Method in interface nxopen.cam.GeneralPropertiesBuilder
-
Returns the selected object(s) list.
- selectedObjects() - Method in interface nxopen.drawings.DrawingsPropertiesBuilder
-
Returns the selected object(s) list.
- selectedObjects() - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
Returns the selected object(s) list.
- selectedObjects() - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder
-
Returns the selected objects of Solid body or Component type
License requirements: nx_layout ("NX Layout")
.
- selectedObjects() - Method in interface nxopen.MassPropertiesBuilder
-
Returns the selected objects list.
- selectedObjects() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Returns the selected object(s) list.
- selectedObjects() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
Returns the selected object(s) list.
- selectedObjects() - Method in interface nxopen.PreviewPropertiesBuilder
-
Returns the selected object(s) list.
- selectedPart() - Method in interface nxopen.motion.AddSubmechanismBuilder
-
Returns the Motion Simulation part to add as sumbechanism
License requirements: None.
- selectedPart() - Method in interface nxopen.routing.EditPlacePartBuilder
-
Returns the target body to edit part placement
License requirements: routing_base ("Routing Basic")
.
- selectedPhysicsObject() - Method in interface nxopen.mechatronics.GenericSensorBuilder
-
Returns the physics select.
- selectedPhysicsObject() - Method in interface nxopen.mechatronics.LimitSwitchBuilder
-
Returns the physics select.
- selectedPhysicsObject() - Method in interface nxopen.mechatronics.RelayBuilder
-
Returns the physics select.
- selectedPlane() - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
Returns the selected plane
License requirements: None.
- selectedPlcBaseSymbols() - Method in interface nxopen.ame.EditEngineeringObjectBuilder
-
Returns the selected plc symbols
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedPMI() - Method in interface nxopen.annotations.PmiWaveLinkBuilder
-
Returns the list of selected PMI to be WAVE linked
License requirements: solid_modeling ("SOLIDS MODELING")
.
- selectedPoints() - Method in interface nxopen.cam.InspectionDeleteMeaPtsBuilder
-
Returns the selected analysis points to delete
License requirements: None.
- selectedPoints() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the selected external points
License requirements: None.
- selectedPoints() - Method in interface nxopen.facet.CreateTransitionBuilder
-
Returns the selected points.
- selectedPoints() - Method in interface nxopen.linedesigner.JigOnPlaneBuilder
-
Returns the selected points
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- selectedPort() - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Returns the port selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedPort() - Method in interface nxopen.routing.DivisionsBuilder
-
Returns the
Port
to identify the cross-section that is to be split
License requirements: routing_hvac ("Routing HVAC")
Created in NX7.5.0
- selectedPOUFromLibrary() - Method in interface nxopen.ame.ConnectToLibraryItemBuilder
-
Returns the library pou selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedProduct() - Method in interface nxopen.ame.Manage3DModelsBuilder
-
Returns the selected
AspectNode
License requirements: None.
- selectedQuery() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the query object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedQueryClause() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the selected query clause
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedReceptacleObject() - Method in interface nxopen.ame.SelectMountingInterfaceLocationBuilder
-
Returns the tag of selected receptacle object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedRegion() - Method in interface nxopen.drawings.AddObjectsToRegionBuilder
-
Returns the get selected region
License requirements: None.
- selectedRegion() - Method in interface nxopen.drawings.SelectRegionBuilder
-
Returns the get selected region
License requirements: None.
- SelectedResultsData() - Constructor for class nxopen.cae.LaminatePostReportBuilder.SelectedResultsData
-
- selectedRule() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Returns the selected report rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedSegment() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the selected segment
License requirements: None.
- selectedSheets() - Method in interface nxopen.PlotSourceBuilder
-
Returns the number of sheets selected
License requirements: None.
- selectedSide1() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the first selected side of the parpln slot/tab
License requirements: None.
- selectedSide2() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the second selected side of the parpln slot/tab
License requirements: None.
- SelectedSolutionsData() - Constructor for class nxopen.cae.LaminatePostReportBuilder.SelectedSolutionsData
-
- selectedSourcePort() - Method in interface nxopen.ame.PortConnectionBuilder
-
Returns the source port
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SELECTEDSOURCES - Static variable in class nxopen.mechatronics.ObjectSinkBuilder.DeleteSourceType
-
Selected sources
- selectedSubnet() - Method in interface nxopen.ame.AssignSubnetBuilder
-
Returns the selection where the object will be reassigned.
- selectedSurfaces() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the underlying surfaces selector.
- selectedTangencyGroup() - Method in interface nxopen.routing.AssignTangencyBuilder
-
- selectedTorus() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the selected torus
License requirements: None.
- selectedType() - Method in interface nxopen.ame.AncestorEvaluatorBuilder
-
Returns the selected type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedUDTFromLibrary() - Method in interface nxopen.ame.PlcSymbolBuilder
-
Returns the library UDT selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectedView() - Method in interface nxopen.drawings.AddRemoveBoxViewBuilder
-
Returns the selected view
License requirements: None.
- selectedView() - Method in interface nxopen.drawings.SelectModelViewBuilder
-
Returns the selected view
License requirements: None.
- selectElectrode() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Returns the selected electrode
License requirements: None.
- selectElectrodeBlock() - Method in interface nxopen.tooling.UndersizeBuilder
-
- SelectElement - Interface in nxopen.blockstyler
-
Represents a Select Elements block .
- selectElement() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
Returns the selected shell element
License requirements: None.
- selectElementMgr() - Method in interface nxopen.cae.CaePart
-
Returns the select element manager belonging to this IFem .
- selectElements() - Method in interface nxopen.cae.LaminateElementFilterBuilder
-
Returns the selected elements
License requirements: nx_lam_composites ("Laminate Composites")
.
- SelectElementsBuilder - Interface in nxopen.cae
-
- selectElementsGroupOne() - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
Returns the elements in group one
License requirements: None.
- selectElementsGroupTwo() - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
Returns the elements in group two
License requirements: None.
- SelectElementsManager - Interface in nxopen.cae
-
Provides method for creating builder for
select element operation commands in both fem and sim part
To obtain an instance of this class, refer to
CaePart
Created in NX5.0.0
- selectEndLimit() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the select end limit.
- selectEndPlane() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the selected end plane.
- selectEndTrim() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the select end trim - used to trim the end of the section guide.
- selectEndTrim() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the select end trim
License requirements: None.
- selectEntities(NXObject[]) - Method in interface nxopen.features.FaceRecognitionBuilder
-
Adds entities to collector
License requirements: gateway ("UG GATEWAY")
.
- selectEntity(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
This command selects one entity.
- selectEntityAdd() - Method in interface nxopen.tooling.LayoutManagementBuilder
-
Returns the select entity to add into the station
License requirements: None.
- selectEntityRemove() - Method in interface nxopen.tooling.LayoutManagementBuilder
-
Returns the select entity to remove from the station
License requirements: None.
- selectExistingPoint() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
Returns the select existing point
License requirements: None.
- selectExistingPoint() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the select existing point
License requirements: None.
- selectExpression(Expression) - Method in interface nxopen.annotations.SuppressPMIBuilder
-
Selects the expression for suppression when the method is Select Expression
License requirements: None.
- SelectExpressionList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectFace() - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilder
-
Returns the select face
License requirements: None.
- selectFace() - Method in interface nxopen.annotations.RegionBuilder
-
- selectface() - Method in interface nxopen.features.ShelfBuilder
-
Returns the selected face
License requirements: None.
- selectFace() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
- selectFace() - Method in interface nxopen.features.shipdesign.generalarrangement.FaceCharacteristicsBuilder
-
Returns the face to assign the specific characteristics.
- selectFace() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the placement faces or datum plane
License requirements: None.
- selectFace() - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder
-
Returns the select face.
- selectFace() - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder
-
Returns the hood face
License requirements: None.
- selectFace() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
Returns the select face
License requirements: None.
- selectFace() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the selected entities for performing the radius reduction operation, which selected by "Select Faces by Radius"
License requirements: None.
- selectFace() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilder
-
Returns the selected entities of single chain for performing radius reduction
License requirements: None.
- SelectFace - Interface in nxopen
-
Represents a single object selection.
- selectFace() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the select face.
- selectFace() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the selected faces
License requirements: None.
- selectFace() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the select face
License requirements: None.
- selectFace() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the select face
License requirements: None.
- selectFace() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the select face
License requirements: None.
- selectFace() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the select face
License requirements: None.
- SelectFace.ValueData - Class in nxopen
-
- SelectFace.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectFace.ValueWithSnapData - Class in nxopen
-
- selectFaceAccordingToAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the faces according to attribute
License requirements: None.
- SelectFaceList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectFaces() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
Returns the faces that need to have excess material.
- selectFaces() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the select faces
License requirements: None.
- selectFaces() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the burring face of burring region.
- selectFaces() - Method in interface nxopen.tooling.ColorExpressionsBuilder
-
Returns the solid faces selected by user
License requirements: None.
- selectFacetBodies() - Method in interface nxopen.facet.PolygonModelingBuilder
-
Returns the selected bodies
License requirements: None.
- SelectFacetedBody - Interface in nxopen.facet
-
Represents a single object selection.
- SelectFacetedBody.ValueData - Class in nxopen.facet
-
- SelectFacetedBody.ValueWithCaeSetObjectInfoData - Class in nxopen.facet
-
- SelectFacetedBody.ValueWithSnapData - Class in nxopen.facet
-
- SelectFacetedBodyList - Interface in nxopen.facet
-
Represents a list of objects on a selection list.
- selectFaceToDivide() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the select face to divide
License requirements: None.
- SelectFacetRegion - Interface in nxopen.blockstyler
-
Represents a Select Region Selection block .
- SelectFeature - Interface in nxopen.blockstyler
-
Represents a Select Feature block .
- selectFeature() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the selector for the inspection feature
License requirements: None.
- selectFeature() - Method in interface nxopen.features.ColorFeatureBuilder
-
Returns the features to color
License requirements: None.
- selectFeature() - Method in interface nxopen.features.ColorFeatureGroupBuilder
-
Returns the features to color
License requirements: None.
- selectFeature() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Returns the selection list of features to be replaced
License requirements: None.
- SelectFeature - Interface in nxopen.features
-
Represents a single object selection.
- SelectFeature.ValueData - Class in nxopen.features
-
- SelectFeature.ValueWithCaeSetObjectInfoData - Class in nxopen.features
-
- SelectFeature.ValueWithSnapData - Class in nxopen.features
-
- SelectFeatureList - Interface in nxopen.features
-
Represents a list of objects on a selection list.
- selectFeatures() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the select features button
License requirements: None.
- selectFeatures() - Method in interface nxopen.cam.InspectionPatternFeatureBuilder
-
Returns the select features button used to select features from the screen
License requirements: None.
- selectFeatures() - Method in interface nxopen.features.shipdesign.ShipDesignVersionUpBuilder
-
Returns the select features
License requirements: None.
- selectFeatures(String, Selection.SelectionFeatureType) - Method in interface nxopen.Selection
-
Select features
License requirements: None.
- selectFeatures() - Method in interface nxopen.tooling.FeatureReferenceSetBuilder
-
Returns the select feature
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- SelectFeaturesData() - Constructor for class nxopen.Selection.SelectFeaturesData
-
- SelectFEElemFaceList - Interface in nxopen.cae
-
Represents a list of objects on a selection list.
- SelectFENode - Interface in nxopen.cae
-
Represents a single object selection.
- SelectFENode.ValueData - Class in nxopen.cae
-
- SelectFENode.ValueWithCaeSetObjectInfoData - Class in nxopen.cae
-
- SelectFENode.ValueWithSnapData - Class in nxopen.cae
-
- SelectFENodeList - Interface in nxopen.cae
-
Represents a list of objects on a selection list.
- selectField(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
This command selects one field.
- SelectFieldData - Interface in nxopen.motion
-
Represents a single object selection.
- SelectFieldData.ValueData - Class in nxopen.motion
-
- SelectFieldData.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectFieldData.ValueWithSnapData - Class in nxopen.motion
-
- selectFile(String, boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Selects or deselects a file
License requirements: nx_layout ("NX Layout")
.
- selectFirstEdgeFace(DisplayableObject, DisplayableObject) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Selection of first edge or face
License requirements: gateway ("UG GATEWAY")
.
- selectFirstTri() - Method in interface nxopen.cae.CombineTrisBuilder
-
Returns the selected first tri element
License requirements: None.
- selectFixtureRoot() - Method in interface nxopen.tooldesigner.SelectFixtureRootBuilder
-
Returns the selected fixture base
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- SelectFixtureRootBuilder - Interface in nxopen.tooldesigner
-
A class that used for align the model to the product
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectFixtureRootBuilder
Created in NX10.0.0
- SelectFixtureUnitsBuilder - Interface in nxopen.tooldesigner
-
SelectFixtureUnitsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectFixtureUnitsBuilder
Default values.
- SelectFixtureUnitsBuilder.SearchTypeEnum - Class in nxopen.tooldesigner
-
SearchTypes
- SelectFlatPattern - Interface in nxopen.features
-
Represents a single object selection.
- SelectFlatPattern.ValueData - Class in nxopen.features
-
- SelectFlatPattern.ValueWithCaeSetObjectInfoData - Class in nxopen.features
-
- SelectFlatPattern.ValueWithSnapData - Class in nxopen.features
-
- selectFlatteningFeature() - Method in interface nxopen.FlatteningBuilder
-
- selectFolder() - Method in interface nxopen.ame.GroupBuilder
-
Returns the select folder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectFolder(String, boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Selects or deselects a folder
License requirements: nx_layout ("NX Layout")
.
- selectFolder(String) - Method in interface nxopen.diagramminglibraryauthor.PipeStockBuilder
-
Selects the pipe stock folder by the class ID
License requirements: None.
- selectFolder(String, String) - Method in interface nxopen.pid.LibraryAuthoringBuilder
-
Selects the all symbols in the folder by the 2D symbol ID
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- selectFont(String, TextBuilder.ScriptOptions) - Method in interface nxopen.features.TextBuilder
-
Selects the font along with appropriate character set
License requirements: solid_modeling ("SOLIDS MODELING")
.
- selectFormingBlock() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the select forming block
License requirements: None.
- selectFormingFaces() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the forming faces of forming region.
- selectFrame() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the select frame
License requirements: None.
- selectFrom() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the selection options.
- selectFromFace() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Returns the selected 'from' face
License requirements: None.
- selectFromMemberSelect() - Method in interface nxopen.ame.EditClauseBuilder
-
- selectGeometry() - Method in interface nxopen.cae.SurfaceCoatBuilder
-
Returns the selected geometry object(s)
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectGeometryProjectedAsArcs() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the Select Geometry Projected as Arcs provides options for selection of SPLARCs entity for centerlines and Annotations
License requirements: None.
- selectGeomObject() - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
Returns the select geometry object that describes the proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- selectGridArea() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the selected grid area of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- SelectGroup - Interface in nxopen
-
Represents a single object selection.
- SelectGroup.ValueData - Class in nxopen
-
- SelectGroup.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectGroup.ValueWithSnapData - Class in nxopen
-
- selectGuideCurve() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the select guide curve (only used with "SpecifyLine" creation method)
License requirements: None.
- selectGuideCurve() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
Returns the selection object for the guide curve.
- SelectGunTipsBuilder - Interface in nxopen.tooldesigner
-
A class that used for align the model to the product
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectGunTipsBuilder
Created in NX11.0.0
- selectHead() - Method in interface nxopen.tooling.SubInsertBuilder
-
Returns the head of sub-insert
License requirements: None.
- selectHighlightMode() - Method in interface nxopen.ame.SelectAndHighlightBuilder
-
Returns
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectHoleAxis() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the hole axis
License requirements: None.
- selectHoles() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
Returns the select holes
License requirements: None.
- selectHoles() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the selected holes
License requirements: None.
- selectHolesAccordingToAttribute() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
Returns the select holes according to attribute
License requirements: None.
- selectHolesAutomatically() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the option whether to select holes automatically
License requirements: None.
- SelectHydraulicCylinderList - Interface in nxopen.mechatronics
-
Represents a list of objects on a selection list.
- SelectIBaseCurve - Interface in nxopen
-
Represents a single object selection.
- SelectIBaseCurve.ValueData - Class in nxopen
-
- SelectIBaseCurve.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectIBaseCurve.ValueWithSnapData - Class in nxopen
-
- SelectIBaseCurveList - Interface in nxopen
-
Represents a list of objects on a selection list.
- SelectIBasePlaneList - Interface in nxopen
-
Represents a list of objects on a selection list.
- SelectIBody - Interface in nxopen
-
Represents a single object selection.
- SelectIBody.ValueData - Class in nxopen
-
- SelectIBody.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectIBody.ValueWithSnapData - Class in nxopen
-
- SelectICurve - Interface in nxopen
-
Represents a single object selection.
- SelectICurve.ValueData - Class in nxopen
-
- SelectICurve.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectICurve.ValueWithSnapData - Class in nxopen
-
- SelectICurveList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectInsert() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the select insert
License requirements: None.
- selectInsertToDelete() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the select insert to delete
License requirements: None.
- selectInsertToDeleteRamp() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the select insert to delete ramp
License requirements: None.
- selectInstance() - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
Returns the select instance
License requirements: None.
- SelectINXObjectList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selection() - Method in interface nxopen.ame.GlobalSelectionBuilder
-
Returns the selected objects
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selection() - Method in interface nxopen.ame.SaveToLibraryBuilder
-
Returns the selected objects from project
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selection - Variable in class nxopen.ame.SelectAMEBaseNode.ValueData
-
selected object
- selection - Variable in class nxopen.ame.SelectAMEBaseNode.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueData
-
selected object
- selection - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.ame.SelectAMEPort.ValueData
-
selected object
- selection - Variable in class nxopen.ame.SelectAMEPort.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.ame.SelectAspectNode.ValueData
-
selected object
- selection - Variable in class nxopen.ame.SelectAspectNode.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.annotations.SelectAnnotation.ValueData
-
selected object
- selection - Variable in class nxopen.annotations.SelectAnnotation.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.annotations.SelectDimension.ValueData
-
selected object
- selection - Variable in class nxopen.annotations.SelectDimension.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.assemblies.SelectComponent.ValueData
-
selected object
- selection - Variable in class nxopen.assemblies.SelectComponent.ValueWithCaeSetObjectInfoData
-
selected object
- selection() - Method in interface nxopen.cae.AutoHealGeometryBuilder
-
Returns the selection
License requirements: None.
- selection() - Method in interface nxopen.cae.LaminateDrapingExtensionBuilder
-
Returns the draping extension domain.
- selection() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the geometric face(s) and element faces on which to perform the extrusion
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- selection() - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
Returns the face(s) on which to perform the fill
License requirements: None.
- selection() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the geometric face(s) and element face(s) on which to assign the material orientation
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- selection() - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
Returns the geometric face(s) and element face(s) on which to zones will be imported
License requirements: None.
- selection() - Method in interface nxopen.cae.LaminateLayupOffsetBuilder
-
Returns the geometric face(s) and element faces on which to assign the layup offset rule
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- selection() - Method in interface nxopen.cae.LaminateMatOrientationBuilder
-
Returns the geometric face(s) and element faces on which to assign the material orientation
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- selection() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selection() - Method in interface nxopen.cae.QueryCurveBuilder
-
Returns the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selection - Variable in class nxopen.cae.SelectCAEBody.ValueData
-
selected object
- selection - Variable in class nxopen.cae.SelectCAEBody.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.cae.SelectCAEEdge.ValueData
-
selected object
- selection - Variable in class nxopen.cae.SelectCAEEdge.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.cae.SelectCAEFace.ValueData
-
selected object
- selection - Variable in class nxopen.cae.SelectCAEFace.ValueWithCaeSetObjectInfoData
-
selected object
- selection() - Method in interface nxopen.cae.SelectElementsBuilder
-
Returns the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selection - Variable in class nxopen.cae.SelectFENode.ValueData
-
selected object
- selection - Variable in class nxopen.cae.SelectFENode.ValueWithCaeSetObjectInfoData
-
selected object
- SELECTION - Static variable in class nxopen.cae.SetManager.DistributedPlanesBboxType
-
a selection of elements is used to define the bounding box
- selection() - Method in interface nxopen.cae.ShowAdjacentBuilder
-
Returns the selection
License requirements: None.
- selection() - Method in interface nxopen.cae.ShowHideBuilder
-
Returns the selection
License requirements: None.
- selection() - Method in interface nxopen.cae.ShowOnlyBuilder
-
Returns the selection
License requirements: None.
- selection() - Method in interface nxopen.cam.CutVolume
-
Returns the selection
License requirements: None.
- selection() - Method in interface nxopen.cam.CutVolumeGeom
-
Returns the selection
License requirements: None.
- selection() - Method in interface nxopen.cam.GeometrySet
-
Returns the selection containing the geometric entities
License requirements: None.
- selection() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the selection geometry
License requirements: None.
- selection - Variable in class nxopen.cam.SelectCAMFeature.ValueData
-
selected object
- selection - Variable in class nxopen.cam.SelectCAMFeature.ValueWithCaeSetObjectInfoData
-
selected object
- SELECTION - Static variable in class nxopen.diagramming.CannedAnnotationBuilder.InheritOption
-
Setting the inherit from selection option
- SELECTION - Static variable in class nxopen.diagramming.tables.TableBuilder.InheritOption
-
Setting the inherit from selection option
- SELECTION - Static variable in class nxopen.die.DieDirectionBuilder.DirectionType
-
Select a coordinate system (-Z) or plane for the direction.
- SELECTION - Static variable in class nxopen.die.DiePlaneBuilder.PlaneType
-
Select the plane to be used.
- selection() - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder
-
Returns the selection to reassociate leader
License requirements: None.
- selection() - Method in interface nxopen.drawings.RemoveObjectsBuilder
-
Returns the selection
License requirements: None.
- selection - Variable in class nxopen.drawings.SelectDraftingView.ValueData
-
selected object
- selection - Variable in class nxopen.drawings.SelectDraftingView.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.drawings.SelectDrawingRegion.ValueData
-
selected object
- selection - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.drawings.SelectDrawingView.ValueData
-
selected object
- selection - Variable in class nxopen.drawings.SelectDrawingView.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.drawings.SelectSectionLine.ValueData
-
selected object
- selection - Variable in class nxopen.drawings.SelectSectionLine.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.facet.SelectFacetedBody.ValueData
-
selected object
- selection - Variable in class nxopen.facet.SelectFacetedBody.ValueWithCaeSetObjectInfoData
-
selected object
- selection() - Method in interface nxopen.features.ExtensionBuilder
-
Returns the selection
License requirements: None.
- selection - Variable in class nxopen.features.SelectFeature.ValueData
-
selected object
- selection - Variable in class nxopen.features.SelectFeature.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.features.SelectFlatPattern.ValueData
-
selected object
- selection - Variable in class nxopen.features.SelectFlatPattern.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.features.SelectPartModule.ValueData
-
selected object
- selection - Variable in class nxopen.features.SelectPartModule.ValueWithCaeSetObjectInfoData
-
selected object
- selection() - Method in interface nxopen.features.VirtualBlendEdgeBuilder
-
Returns the select blend face
License requirements: None.
- selection() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
Returns the selected objects which may be of
Component
or
Sketch
type
License requirements: None.
- selection - Variable in class nxopen.layout2d.SelectComponent.ValueData
-
selected object
- selection - Variable in class nxopen.layout2d.SelectComponent.ValueWithCaeSetObjectInfoData
-
selected object
- selection() - Method in interface nxopen.linedesigner.GlobalSelectionBuilder
-
Returns the selected objects
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- selection - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectRigidBody.ValueData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectSystemObject.ValueData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueData
-
selected object
- selection - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithCaeSetObjectInfoData
-
selected object
- selection() - Method in interface nxopen.mechatronics.TracerBuilder
-
Returns the body selection.
- selection - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectBaseSection.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectBaseSection.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectControlPort.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectControlPort.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectFieldData.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectFieldData.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectJoint.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectJoint.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectLink.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectLink.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectMarker.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectMarker.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectRoad.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectRoad.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyCd.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyFt.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyTno.ValueData
-
selected object
- selection - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.options.OptionsManager.ReorderSelectableStringListValueData
-
the selection bit
- selection() - Method in interface nxopen.routing.ConnectPathBuilder
-
Returns the Routing.ControlPoints that are selected.
- selection - Variable in class nxopen.routing.SelectControlPoint.ValueData
-
selected object
- selection - Variable in class nxopen.routing.SelectControlPoint.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.routing.SelectISegment.ValueData
-
selected object
- selection - Variable in class nxopen.routing.SelectISegment.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.routing.SelectLineSegment.ValueData
-
selected object
- selection - Variable in class nxopen.routing.SelectLineSegment.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.routing.SelectPort.ValueData
-
selected object
- selection - Variable in class nxopen.routing.SelectPort.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.routing.SelectRun.ValueData
-
selected object
- selection - Variable in class nxopen.routing.SelectRun.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.routing.SelectStock.ValueData
-
selected object
- selection - Variable in class nxopen.routing.SelectStock.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectBody.ValueData
-
selected object
- selection - Variable in class nxopen.SelectBody.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueData
-
selected object
- selection - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectCoordinateSystem.ValueData
-
selected object
- selection - Variable in class nxopen.SelectCoordinateSystem.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectCurve.ValueData
-
selected object
- selection - Variable in class nxopen.SelectCurve.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectDatumPlane.ValueData
-
selected object
- selection - Variable in class nxopen.SelectDatumPlane.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectDisplayableObject.ValueData
-
selected object
- selection - Variable in class nxopen.SelectDisplayableObject.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectEdge.ValueData
-
selected object
- selection - Variable in class nxopen.SelectEdge.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectFace.ValueData
-
selected object
- selection - Variable in class nxopen.SelectFace.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectGroup.ValueData
-
selected object
- selection - Variable in class nxopen.SelectGroup.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectIBaseCurve.ValueData
-
selected object
- selection - Variable in class nxopen.SelectIBaseCurve.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectIBody.ValueData
-
selected object
- selection - Variable in class nxopen.SelectIBody.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectICurve.ValueData
-
selected object
- selection - Variable in class nxopen.SelectICurve.ValueWithCaeSetObjectInfoData
-
selected object
- Selection - Interface in nxopen
-
Defines an interface object for executing selection operations
To obtain an instance of this class, refer to
UI
Created in NX3.0.0
- selection - Variable in class nxopen.Selection.SelectionDescriptor
-
- selection - Variable in class nxopen.SelectIParameterizedSurface.ValueData
-
selected object
- selection - Variable in class nxopen.SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectIReferenceAxis.ValueData
-
selected object
- selection - Variable in class nxopen.SelectIReferenceAxis.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectISurface.ValueData
-
selected object
- selection - Variable in class nxopen.SelectISurface.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectLine.ValueData
-
selected object
- selection - Variable in class nxopen.SelectLine.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectNXObject.ValueData
-
selected object
- selection - Variable in class nxopen.SelectNXObject.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectObject.ValueData
-
selected object
- selection - Variable in class nxopen.SelectObject.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectPart.ValueData
-
selected object
- selection - Variable in class nxopen.SelectPart.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectPoint.ValueData
-
selected object
- selection - Variable in class nxopen.SelectPoint.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectSketch.ValueData
-
selected object
- selection - Variable in class nxopen.SelectSketch.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectSmartObject.ValueData
-
selected object
- selection - Variable in class nxopen.SelectSmartObject.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectSpline.ValueData
-
selected object
- selection - Variable in class nxopen.SelectSpline.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectTaggedObject.ValueData
-
selected object
- selection - Variable in class nxopen.SelectTaggedObject.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.SelectView.ValueData
-
selected object
- selection - Variable in class nxopen.SelectView.ValueWithCaeSetObjectInfoData
-
selected object
- selection() - Method in interface nxopen.tooldesigner.GlobalSelectionBuilder
-
Returns the selected objects
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- SELECTION - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.DefinitionType
-
- selection() - Method in interface nxopen.tooling.SelectReuseLibraryItemBuilder
-
Returns the path of the file from the reuse library
License requirements: None.
- SELECTION - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Select UDO event
- selection - Variable in class nxopen.weld.SelectDatumPin.ValueData
-
selected object
- selection - Variable in class nxopen.weld.SelectDatumPin.ValueWithCaeSetObjectInfoData
-
selected object
- selection - Variable in class nxopen.weld.SelectDatumSurface.ValueData
-
selected object
- selection - Variable in class nxopen.weld.SelectDatumSurface.ValueWithCaeSetObjectInfoData
-
selected object
- Selection.AskSelectionCursorPositionData - Class in nxopen
-
- Selection.AskSelectionRectanglePositionData - Class in nxopen
-
- Selection.DialogResponse - Class in nxopen
-
Specify the user response for general dialogs.
- Selection.FilterCallback - Interface in nxopen
-
It is an optional callback which the user can provide to perform
application specific filtering when selecting objects.
- Selection.FilterTaggedObjectCallback - Interface in nxopen
-
It is an optional callback which the user can provide to perform
application specific filtering when selecting tagged objects.
- Selection.MaskTriple - Class in nxopen
-
Used in selection methods to set the types of objects that are selectable.
- Selection.Response - Class in nxopen
-
Specify the user response for the selection operation.
- Selection.SelectFeaturesData - Class in nxopen
-
- Selection.SelectionAction - Class in nxopen
-
Indicates the type of action to perform when an object is selected.
- Selection.SelectionCallback - Interface in nxopen
-
It is an optional callback which the user can provide to customize his selection
- Selection.SelectionDescriptor - Class in nxopen
-
For a rectangle deselection, the fields deselection,
multipleSelection, rectangle
bits would be set.
- Selection.SelectionFeatureType - Class in nxopen
-
Specify the type of features to select.
- Selection.SelectionScope - Class in nxopen
-
Indicates the scope for selecting objects.
- Selection.SelectionType - Class in nxopen
-
Indicates the general class of object to filter selection.
- Selection.SelectObjectData - Class in nxopen
-
- Selection.SelectObjectsData - Class in nxopen
-
- Selection.SelectScreenPositionData - Class in nxopen
-
- Selection.SelectTaggedObjectData - Class in nxopen
-
- Selection.SelectTaggedObjectsData - Class in nxopen
-
- Selection.TaggedObjectSelectionCallback - Interface in nxopen
-
It is an optional callback which the user can provide to customize his selection of tagged objects
- Selection.UistylerSelectionType - Class in nxopen
-
Indicates the general class of object to filter selection.
- selection1 - Variable in class nxopen.ame.SelectAMEBaseNode.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.ame.SelectAMEPort.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.ame.SelectAspectNode.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.annotations.SelectAnnotation.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.cae.SelectFENode.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.cam.SelectCAMFeature.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.features.SelectFeature.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectBaseSection.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectControlPort.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectFieldData.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectLink.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectRoad.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.routing.SelectPort.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.routing.SelectRun.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.routing.SelectStock.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectBody.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectCurve.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectEdge.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectFace.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectGroup.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectIBody.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectICurve.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectIReferenceAxis.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectISurface.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectLine.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectNXObject.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectObject.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectPart.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectPoint.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectSketch.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectSmartObject.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectSpline.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.SelectView.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData
-
first selected object
- selection1 - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData
-
first selected object
- selection2 - Variable in class nxopen.ame.SelectAMEBaseNode.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.ame.SelectAMEPort.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.ame.SelectAspectNode.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.annotations.SelectAnnotation.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.cae.SelectFENode.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.cam.SelectCAMFeature.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.features.SelectFeature.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectBaseSection.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectControlPort.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectFieldData.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectLink.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectRoad.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.routing.SelectPort.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.routing.SelectRun.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.routing.SelectStock.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectBody.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectCurve.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectEdge.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectFace.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectGroup.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectIBody.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectICurve.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectIReferenceAxis.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectISurface.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectLine.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectNXObject.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectObject.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectPart.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectPoint.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectSketch.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectSmartObject.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectSpline.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.SelectView.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData
-
second selected object
- selection2 - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData
-
second selected object
- SELECTION_BOX - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- SELECTION_BOX - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Section Box item
- SELECTION_FILTER - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Selection Filter
- SELECTION_FILTER - Static variable in class nxopen.PropertyContainer.PropertyType
-
Selection Filter
- SELECTION_IN_VIEW - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimGeometryType
-
- SELECTION_ORDER - Static variable in class nxopen.cae.connections.NodalPairingMethod
-
Selection Order
- SELECTION_ORDER - Static variable in class nxopen.cae.ftk.DataManager.AfuRecordZValue
-
The Z value is selection order
- SELECTION_RECIPE - Static variable in class nxopen.cae.connections.LocationType
-
Selection Recipe
- SELECTION_RECIPES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all selection recipes.
- SELECTION_RECIPES_BOUNDING_VOLUME - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all bounding volume selection recipes.
- SELECTION_RECIPES_SINGLE_NODE - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all single node selection recipes.
- SELECTION_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator
-
Selection value
- selectionAD() - Method in interface nxopen.ame.MapToExistingObjectBuilder
-
Returns the get selectionAD
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionAreaType() - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder
-
Returns the type of selection location on which design variable is applied
License requirements: None.
- selectionBaseDefinition() - Method in interface nxopen.ame.EngineeringObjectBuilder
-
Returns the selection base definition builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SelectionBaseDefinitionBuilder - Interface in nxopen.ame
-
Journalling Interface class for Builder which allows selection of BaseDefinition.
- selectionBaseFace() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the selected base face for analysis
License requirements: None.
- selectionBody() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the selected body for analysis
License requirements: None.
- SelectionBox - Interface in nxopen.uistyler
-
Represents a SelectionBox for UI Styler .
- SelectionBox.Activate - Interface in nxopen.uistyler
-
Called when a dialog user selects a list entry with a single mouse click, presses the spacebar on a selected list entry, or presses Return when the cursor is in the text field.
- SelectionBox.DoubleClick - Interface in nxopen.uistyler
-
Called when a dialog user double-clicks on an option in the selection box or presses Return when an item is already selected.
- selectionCallback(NXObject[], NXObject[], SelectionHandle) - Method in interface nxopen.Selection.SelectionCallback
-
- selectionChannel() - Method in interface nxopen.ame.PlcVendorSymbolBuilder
-
Returns the selection ParentObject (parent of the plc symbol)
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the selection color.
- selectionComp() - Method in interface nxopen.ObjectSelector
-
Returns the selection comp.
- selectionCompensation() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the selection compensation
License requirements: None.
- selectionCurves() - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
Returns the selected curves are return
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- selectionCutout() - Method in interface nxopen.features.shipdesign.PenetrationRequestForCutoutBuilder
-
Returns the selection cutout
License requirements: None.
- SelectionDescriptor() - Constructor for class nxopen.Selection.SelectionDescriptor
-
- SelectionDescriptor(boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.Selection.SelectionDescriptor
-
Constructor for the SelectionDescriptor object.
- selectionEdge() - Method in interface nxopen.tooling.ReferenceBlendBuilder
-
Returns the edge selection
License requirements: None.
- selectionElementEdges() - Method in interface nxopen.cae.LocalRemeshBuilder
-
Returns the select element edges to lock
License requirements: None.
- SelectionEngineeringObjectDefinitionBuilder - Interface in nxopen.ame
-
JA class for the Engineering Object Definition Block
This object does not need a creator.
- selectionEngObject() - Method in interface nxopen.ame.LoadLineDesignerBuilder
-
Returns the selected objects
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionEngObjectDefinition() - Method in interface nxopen.ame.CreateProductBuilder
-
Returns the engineering object definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionEnum() - Method in interface nxopen.linedesigner.RenameDialogeBuilder
-
Returns the item or occurence selection
License requirements: None.
- selectionFace() - Method in interface nxopen.cae.MappedMeshBuilder
-
Returns the selection face
License requirements: None.
- selectionFace() - Method in interface nxopen.tooling.ReferenceBlendBuilder
-
Returns the face selection
License requirements: None.
- selectionFeature() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the selection feature
License requirements: None.
- selectionFillet() - Method in interface nxopen.cae.Mesh3dTetBuilder
-
- selectionFilter() - Method in interface nxopen.presslinesimulation.MountPointBuilder
-
Returns the geometry selection filter
License requirements: None.
- selectionFilter() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the selection filter
License requirements: None.
- selectionFilterAccordingToAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the selection filter according to attribute
License requirements: None.
- selectionFilterToggle() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the selection filter toggle
License requirements: None.
- selectionFrom() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Returns the From geometry
License requirements: nx_ship_detail ("Ship Detail Design")
.
- SelectionHandle - Interface in nxopen
-
Represents a SelectionHandle for UI Styler .
- selectionHanger() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the selection hanger
License requirements: None.
- selectionInputObject() - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
-
Returns the inuput object selection
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- SelectionIntentRule - Interface in nxopen
-
Represents a
SelectionIntentRule
which essentially provides capabilities to collect
curves, edges, faces and bodies.
- SelectionIntentRule.RuleType - Class in nxopen
-
- selectionLD() - Method in interface nxopen.ame.MapToExistingObjectBuilder
-
Returns the get selectionLD
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionLink() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the selection link
License requirements: None.
- selectionList() - Method in interface nxopen.cae.LaminateSelectEntitiesBuilder
-
Returns the selection list
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- selectionList() - Method in interface nxopen.cae.Mesh0dBuilder
-
Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectionList() - Method in interface nxopen.cae.Mesh1dBuilder
-
Returns the selection objects.
- selectionList() - Method in interface nxopen.cae.Mesh2dBuilder
-
Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectionList() - Method in interface nxopen.cae.Mesh3dHexBuilder
-
Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectionList() - Method in interface nxopen.cae.Mesh3dHybridBuilder
-
Returns the selection objects
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic")
.
- selectionList() - Method in interface nxopen.cae.Mesh3dTetBuilder
-
Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectionList() - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder
-
Returns the selected objects to be checked.
- selectionList() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
Returns the selected objects for checking.
- selectionList() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
Returns the selected objects to be checked.
- selectionList() - Method in interface nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder
-
Returns the selected objects to be checked.
- selectionList() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
-
Returns the selected objects to be checked.
- selectionList() - Method in interface nxopen.cae.modelcheck.ReverseBeamElementDirectionBuilder
-
Returns the selected objects to be checked.
- selectionList() - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder
-
Returns the selected objects to be checked.
- selectionList() - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder
-
Returns the selected objects to be checked.
- selectionList() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
- selectionList() - Method in interface nxopen.cae.Shell2SolidBuilder
-
Returns the selection objects
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectionList() - Method in interface nxopen.features.subdivision.SelectCageObjectData
-
Returns the object list.
- SelectionList - Interface in nxopen.geometricutilities
-
- selectionList() - Method in interface nxopen.weld.CharacteristicsBuilder
-
Returns the list of potential attributes and objects selected for this weld feature.
- SelectionListList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- selectionManager() - Method in interface nxopen.UI
-
the SelectionManager for the current session.
- selectionmask - Variable in class nxopen.ApparentChainingRule.Data
-
The selection type none, edge or curve.
- selectionMethod() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the flow and cross selection method
License requirements: cam_base ("CAM BASE")
.
- selectionMethod() - Method in interface nxopen.features.shipdesign.MaterialEstimationBuilder
-
Returns the selection method.
- selectionMethod() - Method in interface nxopen.features.shipdesign.WeightAndCGBuilder
-
Returns the selection method.
- SelectionMethod - Interface in nxopen
-
Represents the output from a smart selector method
This is an abstract class, and cannot be created.
- selectionMethodType() - Method in interface nxopen.cae.SurfaceCoatBuilder
-
Returns the selection method for different ways of selection
License requirements: None.
- selectionModeAsString() - Method in interface nxopen.blockstyler.Tree
-
Returns the SelectionMode
License requirements: None.
- selectionObject() - Method in interface nxopen.ame.SubnetBuilder
-
Returns the selection object which is parent station.
- selectionObject() - Method in interface nxopen.features.subdivision.CageSectionData
-
Returns the selection object.
- selectionObject() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the selection object.
- selectionObject() - Method in interface nxopen.SketchAutoDimensionBuilder
-
Returns the selected sketch curves to auto dimension
License requirements: None.
- selectionObjects() - Method in interface nxopen.ame.AssignAspectBuilder
-
Returns the selection of objects to be reassigned
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionObjects() - Method in interface nxopen.ame.PlaceAutomationBuilder
-
Returns the selection of objects to be reassigned
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionObjects() - Method in interface nxopen.ame.UnloadLineDesignerBuilder
-
Returns the selected objects
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionObjects() - Method in interface nxopen.features.shipdesign.UnfoldedMinRecBuilder
-
Returns the ship basic design plate faces and standard part curves.
- selectionOption() - Method in interface nxopen.cae.optimization.TBSLoadCaseManager
-
Returns the selection option
License requirements: None.
- selectionOriginFeature() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the selection origin feature
License requirements: None.
- selectionParent() - Method in interface nxopen.ame.AspectDetailsBuilder
-
Returns the selection parent
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionParent() - Method in interface nxopen.ame.AssignAspectBuilder
-
Returns the selection where the object will be reassigned.
- selectionParent() - Method in interface nxopen.ame.EditEngineeringObjectBuilder
-
Returns the selection where the object will be reassigned.
- selectionParent() - Method in interface nxopen.ame.EngineeringObjectAspectDetailBuilder
-
Returns the selection parent
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionParent() - Method in interface nxopen.ame.PlaceAutomationBuilder
-
Returns the selection where the object will be reassigned.
- selectionParentObject() - Method in interface nxopen.ame.PlcSymbolBuilder
-
Returns the selection ParentObject (parent of the plc symbol)
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionPMI() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the PMI selection
License requirements: None.
- selectionPoint() - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
Returns the selection point
License requirements: None.
- selectionPointForCutRegion - Variable in class nxopen.uf.UFTurn.AskCutRegionOfIndexData
-
- selectionPort() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Returns the replacement port selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionPort() - Method in interface nxopen.ame.OperandRuleBuilder
-
Returns the operand replacement port selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionPort() - Method in interface nxopen.ame.ParameterRuleBuilder
-
Returns the eo any port selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionPosition - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectSelectionData
-
The point at which object is selected, the point
under the cursor when seen in view direction.
- selectionPostCrossSection() - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
Returns the selection post cross section
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- selectionRadiusType() - Method in interface nxopen.display.SelPref
-
Returns the selection radius type
License requirements: None.
- selectionRecipe() - Method in interface nxopen.cae.connections.SelectionRecipeLocation
-
Returns the Selection Recipe used for creating the location.
- SelectionRecipe - Interface in nxopen.cae
-
- SelectionRecipeCollection - Interface in nxopen.cae
-
Provides methods for managing Selection Recipes
SelectionRecipe
To obtain an instance of this class, refer to
CaePart
Created in NX12.0.0
- SelectionRecipeDisplay - Interface in nxopen.cae
-
- SelectionRecipeLocation - Interface in nxopen.cae.connections
-
Location interface.
- selectionRecipes() - Method in interface nxopen.cae.CaePart
-
- selectionReliefToEdit() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the selected relief to edit.
- selectionRuleType() - Method in interface nxopen.display.SelPref
-
Returns the selection rule type
License requirements: None.
- selectionScope() - Method in interface nxopen.assemblies.LoadInterpartDataBuilder
-
Returns the selection scope type
License requirements: None.
- selectionScope() - Method in interface nxopen.ObjectSelector
-
Returns the selection scope option.
- selectionStructure() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the selection structure
License requirements: None.
- SelectionSubscriber - Interface in nxopen
-
- SelectionSubscriber.OnSelectionChangeCallback - Interface in nxopen
-
Prototype for a callback which is called at the end of a series of changes to the set of
selected objects.
- selectionTarget() - Method in interface nxopen.ame.ImportHWXmlBuilder
-
Returns the selected engineering object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectionTarget() - Method in interface nxopen.tooling.CalculateAreaBuilder
-
Returns the target body to calculate area.
- selectionTo() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Returns the To geometry
License requirements: nx_ship_detail ("Ship Detail Design")
.
- selectionTolerancedFeature() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the selection toleranced feature
License requirements: None.
- selectionType() - Method in interface nxopen.annotations.BoundaryBuilder
-
Returns the selection type
License requirements: None.
- selectionType() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
Returns the selection type
License requirements: None.
- selectionType() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the selection type.
- selectionType() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Returns the selection type, which is structure system or feature.
- selectionType() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the selection type.
- selectionType() - Method in interface nxopen.features.shipdesign.VerifyPenetrationBuilder
-
Returns the dialog selection type
License requirements: None.
- selectionType() - Method in interface nxopen.tooling.HoleReportBuilder
-
Returns the selection type to choose select view or holes in window to create hole report
License requirements: None.
- selectionType() - Method in interface nxopen.tooling.RemoveHolesBuilder
-
Returns the selection type
License requirements: None.
- selectionTypeEnum() - Method in interface nxopen.cae.DisplayNodalCsysBuilder
-
Returns the way selections will be displayed
License requirements: None.
- SelectIParameterizedSurface - Interface in nxopen
-
Represents a single object selection.
- SelectIParameterizedSurface.ValueData - Class in nxopen
-
- SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectIParameterizedSurface.ValueWithSnapData - Class in nxopen
-
- SelectIParameterizedSurfaceList - Interface in nxopen
-
Represents a list of objects on a selection list.
- SelectIReferenceAxis - Interface in nxopen
-
Represents a single object selection.
- SelectIReferenceAxis.ValueData - Class in nxopen
-
- SelectIReferenceAxis.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectIReferenceAxis.ValueWithSnapData - Class in nxopen
-
- SelectISegment - Interface in nxopen.routing
-
Represents a single object selection.
- SelectISegment.ValueData - Class in nxopen.routing
-
- SelectISegment.ValueWithCaeSetObjectInfoData - Class in nxopen.routing
-
- SelectISegment.ValueWithSnapData - Class in nxopen.routing
-
- SelectISurface - Interface in nxopen
-
Represents a single object selection.
- SelectISurface.ValueData - Class in nxopen
-
- SelectISurface.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectISurface.ValueWithSnapData - Class in nxopen
-
- SelectJoint - Interface in nxopen.motion
-
Represents a single object selection.
- SelectJoint.ValueData - Class in nxopen.motion
-
- SelectJoint.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectJoint.ValueWithSnapData - Class in nxopen.motion
-
- selectLaminate(String) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Selects a laminate for import
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- selectLayoutSheetView() - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
Returns the select layout sheet view to convert
License requirements: None.
- selectLetter() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- selectLibraryObject() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the engineering object definition or product definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectLine() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Returns the selected line
License requirements: None.
- SelectLine - Interface in nxopen
-
Represents a single object selection.
- SelectLine.ValueData - Class in nxopen
-
- SelectLine.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectLine.ValueWithSnapData - Class in nxopen
-
- selectLine1() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the select line1 (replaced by SelectReference1 in NX8.5)
License requirements: None.
- selectLine1() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the select Line1.
- selectLine1() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the first line (only used with "TwoPlanesandLines" creation method)
License requirements: None.
- selectLine2() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the select line2 (replaced by SelectReference2 in NX8.5)
License requirements: None.
- selectLine2() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the select Line2
This line 2 is only used for the Face2Lines placement method.
- selectLine2() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the second line (only used with "TwoPlanesandLines" creation method)
License requirements: None.
- SelectLineSegment - Interface in nxopen.routing
-
Represents a single object selection.
- SelectLineSegment.ValueData - Class in nxopen.routing
-
- SelectLineSegment.ValueWithCaeSetObjectInfoData - Class in nxopen.routing
-
- SelectLineSegment.ValueWithSnapData - Class in nxopen.routing
-
- selectLink() - Method in interface nxopen.motion.MarkerBuilder
-
Returns the select link
License requirements: None.
- SelectLink - Interface in nxopen.motion
-
Represents a single object selection.
- SelectLink.ValueData - Class in nxopen.motion
-
- SelectLink.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectLink.ValueWithSnapData - Class in nxopen.motion
-
- selectLinkTarget() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the component that the trimmed body is linked to.
- selectLocator() - Method in interface nxopen.weld.LocatorReferenceBuilder
-
Returns the selecte locator
License requirements: None.
- selectLogicals() - Method in interface nxopen.mechatronics.ECADExportBuilder
-
Returns the selected logical objects.
- SelectLogicObjectList - Interface in nxopen.mechatronics
-
Represents a list of objects on a selection list.
- SelectMarker - Interface in nxopen.motion
-
Represents a single object selection.
- SelectMarker.ValueData - Class in nxopen.motion
-
- SelectMarker.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectMarker.ValueWithSnapData - Class in nxopen.motion
-
- selectMasterJoint() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the select axis joint.
- selectMasterSignal() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the select axis joint.
- selectMesh() - Method in interface nxopen.cae.AutomaticMorphBuilder
-
Returns the selected meshes
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectMesh() - Method in interface nxopen.cae.ConvexMeshBuilder
-
Returns the select mesh
License requirements: None.
- selectMesh() - Method in interface nxopen.cae.MeshRefinementBuilder
-
Returns the selection objects.
- selectMesh() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
-
Returns the selected mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectMesh() - Method in interface nxopen.cae.ThickenMeshBuilder
-
Returns the select mesh
License requirements: None.
- SelectMeshList - Interface in nxopen.cae
-
Represents a list of objects on a selection list.
- selectMethod() - Method in interface nxopen.geometricutilities.BooleanRegionSelect
-
Returns the boolean region selection method method
License requirements: None.
- selectMirrorObject() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the selected objects for mirror.
- selectMode() - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Returns the selection mode
License requirements: nx_layout ("NX Layout")
.
- selectMode() - Method in interface nxopen.annotations.ImportSymbolBuilder
-
Returns the selection mode
License requirements: nx_layout ("NX Layout")
.
- selectModeAsString() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the SelectMode as string
License requirements: None.
- selectModeAsString() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the SelectMode as string
License requirements: None.
- selectModeAsString() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the SelectMode as string
License requirements: None.
- selectModeAsString() - Method in interface nxopen.blockstyler.SelectElement
-
Returns the SelectMode as string
License requirements: None.
- selectModeAsString() - Method in interface nxopen.blockstyler.SelectFeature
-
Returns the SelectMode as string
License requirements: None.
- selectModeAsString() - Method in interface nxopen.blockstyler.SelectNode
-
Returns the SelectMode as string
License requirements: None.
- selectModeAsString() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the SelectMode as string
License requirements: None.
- SelectModelingViewList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectModelView() - Method in interface nxopen.drawings.BaseViewBuilder
-
Returns the model view
License requirements: None.
- SelectModelViewBuilder - Interface in nxopen.drawings
-
Represents a Select Model View builder that selects a model view
.
- selectModes(LaminateModeProperty[]) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
Sets the a mode property selection
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- selectModeset(String) - Method in interface nxopen.cae.ModeSetBuilder
-
Select the mode set that should be used.
- selectMountingInterfaceLocation() - Method in interface nxopen.ame.ProjectEngineeringObjectBuilder
-
Returns the select mounting interface location builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectMountingInterfaceLocation() - Method in interface nxopen.ame.Snap3DModelsBuilder
-
Returns the co-ordinate of target location
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SelectMountingInterfaceLocationBuilder - Interface in nxopen.ame
-
Builder for selecting mounting interface location from graphics window
This object does not need a creator
.
- selectNextGouge() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Select next gouge
License requirements: cam_base ("CAM BASE")
.
- SelectNode - Interface in nxopen.blockstyler
-
Represents a Select Node block .
- selectNode(Node, boolean, boolean) - Method in interface nxopen.blockstyler.Tree
-
Selects the provided node.
- selectNodes(Node[], boolean, boolean) - Method in interface nxopen.blockstyler.Tree
-
Selects the provided nodes.
- selectNominalFeature() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the select nominal feature button
License requirements: None.
- selectNormalSurface() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Returns the underlying surface used to determine the normal and approach direction vectors
License requirements: None.
- SelectNXObject - Interface in nxopen
-
Represents a single object selection.
- SelectNXObject.ValueData - Class in nxopen
-
- SelectNXObject.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectNXObject.ValueWithSnapData - Class in nxopen
-
- SelectNXObjectList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectObject() - Method in interface nxopen.ame.GroupBuilder
-
Returns the select object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectObject() - Method in interface nxopen.ame.SelectBaseDefinitionNodeBuilder
-
Returns the selected Object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectObject() - Method in interface nxopen.ame.SelectionEngineeringObjectDefinitionBuilder
-
Returns the get select Object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectObject() - Method in interface nxopen.annotations.AssociativityBuilder
-
Returns the select object
License requirements: None.
- selectObject() - Method in interface nxopen.assemblies.ProductOutlineBuilder
-
Returns the objects defined in Product Outline.
- SelectObject - Interface in nxopen.blockstyler
-
Represents a Select Object block .
- selectObject() - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder
-
Returns the list of selected objects
License requirements: None.
- selectObject() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
Returns the select object
License requirements: None.
- selectObject() - Method in interface nxopen.cam.BoundarySet
-
Returns the select object
License requirements: None.
- selectObject() - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
Returns the select object for faces
License requirements: None.
- selectObject() - Method in interface nxopen.features.shipdesign.ExamineSteelFeatureBuilder
-
Returns the Examining objects.
- selectObject() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the select object
License requirements: None.
- selectObject() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the faces or facet bodies
License requirements: None.
- selectObject() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the faces on which to perform curvature analysis.
- selectObject() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the selected objects
License requirements: None.
- selectObject(String, String, Selection.SelectionScope, boolean, boolean) - Method in interface nxopen.Selection
-
- selectObject(String, String, Selection.SelectionScope, Selection.SelectionAction, boolean, boolean, Selection.MaskTriple[]) - Method in interface nxopen.Selection
-
- selectObject(String, String, Selection.SelectionScope, boolean, Selection.SelectionType[]) - Method in interface nxopen.Selection
-
- SelectObject - Interface in nxopen
-
Represents a single object selection.
- selectObject() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the selected entities making up the blank to be nested.
- SelectObject.FilterType - Class in nxopen.blockstyler
-
Indicates the general filter type for selection.
- SelectObject.ValueData - Class in nxopen
-
- SelectObject.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectObject.ValueWithSnapData - Class in nxopen
-
- SelectObjectData() - Constructor for class nxopen.Selection.SelectObjectData
-
- selectObjectInNavigator(RootObject) - Method in interface nxopen.routing.RouteManager
-
Highlights the given object in the Component or Connection Navigator.
- selectObjectList() - Method in interface nxopen.geometricutilities.SelectionList
-
Returns the list of geometries
License requirements: None.
- SelectObjectList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectObjectList() - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
Returns the selection object containing data that is to be attributed.
- selectObjects() - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
Returns the select objects from the current sheet
License requirements: None.
- selectObjects(String, String, Selection.SelectionScope, boolean, boolean) - Method in interface nxopen.Selection
-
- selectObjects(String, String, Selection.SelectionScope, Selection.SelectionAction, boolean, boolean, Selection.MaskTriple[]) - Method in interface nxopen.Selection
-
- selectObjects(String, String, Selection.SelectionScope, boolean, Selection.SelectionType[]) - Method in interface nxopen.Selection
-
- SelectObjectsData() - Constructor for class nxopen.Selection.SelectObjectsData
-
- selectObjectsInNavigator(RootObject[]) - Method in interface nxopen.routing.RouteManager
-
Highlights the given objects in the Component or Connection Navigator.
- selectObjectsToConvert() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
Returns the select objects to convert
License requirements: None.
- selectOffsetSpreadsheet() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the super offset spreadsheet
License requirements: None.
- selectOption() - Method in interface nxopen.features.CopyPasteBuilder
-
Returns the parent select option.
- SelectOrdinateDimensionList - Interface in nxopen.annotations
-
Represents a list of objects on a selection list.
- selectOrientationLine() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the orientation line (only used with "SpecifyLine" creation method)
License requirements: None.
- selectOuterBoundary() - Method in interface nxopen.routing.PlatformCreatorBuilder
-
Returns the platform outer boundary section
License requirements: routing_platform ("Routing Platform")
.
- selectOutline() - Method in interface nxopen.linedesigner.FloorEquipmentBuilder
-
Returns the outline used for creation of floor is return
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- selectOutline() - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
Returns the selected outline for creation of hole
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- selectPad() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the select backing pad feature to delete
License requirements: None.
- selectParameters(String, Tag) - Method in interface nxopen.uf.UFUi
-
- SelectParametersData() - Constructor for class nxopen.uf.UFUi.SelectParametersData
-
- selectParentComponent() - Method in interface nxopen.annotations.TableColumnBuilder
-
Returns the select parent component.
- selectParentPartOcc() - Method in interface nxopen.tooling.CopySolidBuilder
-
Returns the parent part occurrence of the part which collects the copied solid bodies.
- selectPart() - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
Returns the ship basic design part
License requirements: nx_ship_basic ("Ship Basic Design")
.
- selectPart() - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
Returns the ship basic design part
License requirements: nx_ship_basic ("Ship Basic Design")
.
- SelectPart - Interface in nxopen
-
Represents a single object selection.
- selectPart() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the selected part.
- SelectPart.ValueData - Class in nxopen
-
- SelectPart.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectPart.ValueWithSnapData - Class in nxopen
-
- SelectPartBuilder - Interface in nxopen.features.shipdesign
-
- SelectPartBuilder.Types - Class in nxopen.features.shipdesign
-
Type.
- SelectPartFromList - Interface in nxopen.blockstyler
-
Represents a Select Part From List block .
- SelectPartList - Interface in nxopen
-
Represents a list of objects on a selection list.
- SelectPartModule - Interface in nxopen.features
-
Represents a single object selection.
- SelectPartModule.ValueData - Class in nxopen.features
-
- SelectPartModule.ValueWithCaeSetObjectInfoData - Class in nxopen.features
-
- SelectPartModule.ValueWithSnapData - Class in nxopen.features
-
- selectParts() - Method in interface nxopen.issue.SnapshotSubsetBuilder
-
Returns the select parts which will be collected into issue snapshot subset.
- selectPartSymbol(String, String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Selects part custom symbol
License requirements: drafting ("DRAFTING")
.
- selectPassThrougCurves() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the pass through curves
License requirements: None.
- selectPhysics() - Method in interface nxopen.mechatronics.ExternalConnectionBuilder
-
Returns the select physics.
- SelectPhysicsConstraint - Interface in nxopen.mechatronics
-
Represents a single object selection.
- SelectPhysicsConstraint.ValueData - Class in nxopen.mechatronics
-
- SelectPhysicsConstraint.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics
-
- SelectPhysicsConstraint.ValueWithSnapData - Class in nxopen.mechatronics
-
- SelectPhysicsJoint - Interface in nxopen.mechatronics
-
Represents a single object selection.
- SelectPhysicsJoint.ValueData - Class in nxopen.mechatronics
-
- SelectPhysicsJoint.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics
-
- SelectPhysicsJoint.ValueWithSnapData - Class in nxopen.mechatronics
-
- selectPhysicsObject() - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
Returns the select physics objects that are encapsulated in the proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- selectPipeStock(String) - Method in interface nxopen.diagramminglibraryauthor.PipeStockBuilder
-
Selects one pipe stock by the symbol ID
License requirements: None.
- selectPlane() - Method in interface nxopen.die.DiePlaneBuilder
-
Returns the selected plane
License requirements: None.
- selectPlane() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
Returns the select plane
License requirements: None.
- selectPlateToSplit() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the selected die plates.
- selectPMIObjects() - Method in interface nxopen.annotations.SuppressPMIBuilder
-
Returns the selected pmi objects
License requirements: None.
- SelectPneumaticCylinderList - Interface in nxopen.mechatronics
-
Represents a list of objects on a selection list.
- selectPoint() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the selected edge point
License requirements: None.
- selectPoint() - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Returns the selected point
License requirements: None.
- selectPoint() - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
Returns the select point to calculate the new created drawing view's reference point
License requirements: None.
- selectPoint() - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
Returns the selected point of rail opening feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- selectPoint() - Method in interface nxopen.mechatronics.TracerBuilder
-
Returns the origin point.
- SelectPoint - Interface in nxopen
-
Represents a single object selection.
- selectPoint() - Method in interface nxopen.tooling.SectionLineCreationBuilder
-
Returns the pnt select point
License requirements: None.
- selectPoint() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the select point
License requirements: None.
- SelectPoint.ValueData - Class in nxopen
-
- SelectPoint.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectPoint.ValueWithSnapData - Class in nxopen
-
- selectPointCollection(String, boolean) - Method in interface nxopen.uf.UFUi
-
- SelectPointCollectionData() - Constructor for class nxopen.uf.UFUi.SelectPointCollectionData
-
- SelectPointList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectPoints() - Method in interface nxopen.tooling.UndersizeBuilder
-
- selectPointsObject() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the selected objects for Points
License requirements: ugweld ("UG WELD")
.
- selectPoles(int, int[], Point[]) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Adds new selected pole
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- SelectPort - Interface in nxopen.routing
-
Represents a single object selection.
- SelectPort.ValueData - Class in nxopen.routing
-
- SelectPort.ValueWithCaeSetObjectInfoData - Class in nxopen.routing
-
- SelectPort.ValueWithSnapData - Class in nxopen.routing
-
- selectPreferenceNodesList() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
Returns the preference nodes select list for keep selected and remove selected options
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectPreviousGouge() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Select previous gouge
License requirements: cam_base ("CAM BASE")
.
- selectPrimaryParameter(String, String) - Method in interface nxopen.tooling.SpreadsheetData
-
Change the primary parameter of the spreadsheet
License requirements: None.
- selectProduct() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Returns the selection of product for which to create changeover.
- SelectProductDefinitionBuilder - Interface in nxopen.ame
-
JA class for the Product Definition Selection
This object does not need a creator.
- selectProductOrEoDef() - Method in interface nxopen.ame.LinkSymbolToDeviceTypeBuilder
-
Returns the product or engineering object definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectProductOrEoDef() - Method in interface nxopen.ame.SchematicSymbolConfigurationBuilder
-
Returns the product or engineering object definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SelectProductOrEoDefinitionBuilder - Interface in nxopen.ame
-
JA class for the Product Definition or Engineering Object Definition Selection
This object does not need a creator.
- selectProfile() - Method in interface nxopen.tooling.ProfileSplitBuilder
-
Returns the selected profile
License requirements: None.
- selectProfileBody() - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder
-
Returns the select profile body.
- selectProjectionFaces() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the button used to select faces to project the circle to
License requirements: None.
- selectProjectionFaces() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
Returns the selector for projection faces
License requirements: None.
- selectProjectionFaces() - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Returns the selected projection faces
License requirements: None.
- selectPropagatedExpressions() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
The propagated expressions is set during creation of connector
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- selectRampFeature() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the select ramp feature
License requirements: None.
- selectReference1() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the reference1 (used only for Face2Lines, Faces2Surfaces, and FacesBetweenSurfacesSurface)
License requirements: None.
- selectReference2() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the reference2 (used only for Face2Lines, Faces2Surfaces, and FacesBetweenSurfacesSurface)
License requirements: None.
- selectReference3() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the reference3 (used only for FacesBetweenSurfacesSurface)
License requirements: None.
- selectReferenceBodies() - Method in interface nxopen.FlatteningBuilder
-
- selectReferenceCurves() - Method in interface nxopen.FlatteningBuilder
-
- selectReferenceFaces() - Method in interface nxopen.FlatteningBuilder
-
- selectReferenceFeature() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the selector for the reference feature
License requirements: None.
- selectRegion(Point3d) - Method in interface nxopen.SketchAssociativeTrimBuilder
-
The function sets help point for region select.
- SelectRegionBuilder - Interface in nxopen.drawings
-
- selectRegionFaces() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Returns the region faces for defining region
License requirements: None.
- selectRemovedGroup() - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
Returns the elements removed as ribs
License requirements: None.
- selectReplacementFace() - Method in interface nxopen.features.StepBuilder
-
Returns the selected replacement face
License requirements: None.
- selectReuseItem() - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilder
-
Returns the selected reuse item list.
- SelectReuseLibraryItemBuilder - Interface in nxopen.tooling
-
Select a part from the reuse library .
- SelectReuseLibraryListBuilder - Interface in nxopen.tooling
-
Select a list of objects from the reuse library .
- SelectReuseLibraryListItemBuilder - Interface in nxopen.tooling
-
Select reuse library list item .
- SelectReuseLibraryListItemBuilderList - Interface in nxopen.tooling
-
Represents a list of objects.
- SelectRigidBody - Interface in nxopen.mechatronics
-
Represents a single object selection.
- SelectRigidBody.ValueData - Class in nxopen.mechatronics
-
- SelectRigidBody.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics
-
- SelectRigidBody.ValueWithSnapData - Class in nxopen.mechatronics
-
- SelectRoad - Interface in nxopen.motion
-
Represents a single object selection.
- SelectRoad.ValueData - Class in nxopen.motion
-
- SelectRoad.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectRoad.ValueWithSnapData - Class in nxopen.motion
-
- selectRoom() - Method in interface nxopen.features.shipdesign.RoomAttributesBuilder
-
Returns the select room
License requirements: None.
- selectRotationLetter() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the selected objected should be note type only which is the desired location of the rotation point of the section line specified
License requirements: None.
- selectRoutingObjects() - Method in interface nxopen.routing.PlaceElbowsBuilder
-
Returns the route object collector builder for placing elbows
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
- selectRoutingObjects(String, String, int, int, int) - Method in interface nxopen.uf.UFUi
-
- SelectRoutingObjectsData() - Constructor for class nxopen.uf.UFUi.SelectRoutingObjectsData
-
- selectRpoDimensions(String, Tag) - Method in interface nxopen.uf.UFUi
-
- SelectRpoDimensionsData() - Constructor for class nxopen.uf.UFUi.SelectRpoDimensionsData
-
- SelectRun - Interface in nxopen.routing
-
Represents a single object selection.
- SelectRun.ValueData - Class in nxopen.routing
-
- SelectRun.ValueWithCaeSetObjectInfoData - Class in nxopen.routing
-
- SelectRun.ValueWithSnapData - Class in nxopen.routing
-
- selectSchematicSymbol() - Method in interface nxopen.ame.LinkSymbolToDeviceTypeBuilder
-
Returns the schematic symbol item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectScrap() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the select scrap
License requirements: None.
- selectScrap() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the select scraps for pierce insert design.
- selectScrap() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the select scraps for pierce insert design.
- selectScrap() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the select scraps for punch insert design.
- selectScrapCutters() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the selected scrap cutters.
- selectScrapOrInsert() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the select scrap or insert for association update.
- selectScrapOrInsert() - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder
-
Returns the select scrap or insert for association update.
- selectScreenPosition(String) - Method in interface nxopen.Selection
-
Select screen position on graphics display
License requirements: None.
- SelectScreenPositionData() - Constructor for class nxopen.Selection.SelectScreenPositionData
-
- selectScrewSize(int, double, double, boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Selects the screw size
License requirements: None.
- selectSecondEdgeFace(DisplayableObject, DisplayableObject) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Selection of second edge or face
License requirements: gateway ("UG GATEWAY")
.
- selectSecondTri() - Method in interface nxopen.cae.CombineTrisBuilder
-
Returns the selected second tri element
License requirements: None.
- selectSection() - Method in interface nxopen.die.AddSurfBuilder
-
Returns the addendum section feature to define the shape of the addendum surface.
- SelectSectionLine - Interface in nxopen.drawings
-
Represents a single object selection.
- SelectSectionLine.ValueData - Class in nxopen.drawings
-
- SelectSectionLine.ValueWithCaeSetObjectInfoData - Class in nxopen.drawings
-
- SelectSectionLine.ValueWithSnapData - Class in nxopen.drawings
-
- selectSectionOri() - Method in interface nxopen.cae.BeamEADBuilder
-
Returns the get selection ori operator gets section orientaion value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- selectSeedFaces() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Returns the select seed faces
License requirements: None.
- selectShankProfile() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the selected shank profile.
- selectSheetBodies() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Returns the select sheets is for selecting region, parting and patched sheets to form a new sheet
License requirements: None.
- selectSheetBody() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the select sheet body
License requirements: None.
- selectSheetView() - Method in interface nxopen.layout2d.ConvertSheetToLayoutBuilder
-
Returns the select drawing sheet to convert
License requirements: None.
- SelectSketch - Interface in nxopen
-
Represents a single object selection.
- selectSketch() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the select sketch
License requirements: None.
- selectSketch() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the selected sketch
License requirements: None.
- SelectSketch.ValueData - Class in nxopen
-
- SelectSketch.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectSketch.ValueWithSnapData - Class in nxopen
-
- selectSketchDimensions(String, Tag) - Method in interface nxopen.uf.UFUi
-
- SelectSketchDimensionsData() - Constructor for class nxopen.uf.UFUi.SelectSketchDimensionsData
-
- SelectSmartObject - Interface in nxopen
-
Represents a single object selection.
- SelectSmartObject.ValueData - Class in nxopen
-
- SelectSmartObject.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectSmartObject.ValueWithSnapData - Class in nxopen
-
- selectSnapPoint(TaggedObject, Point3d) - Method in interface nxopen.features.CurveFinderBuilder
-
Adds snap point to collector
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- selectSphere() - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
Returns the selected sphere
License requirements: None.
- SelectSpline - Interface in nxopen
-
Represents a single object selection.
- SelectSpline.ValueData - Class in nxopen
-
- SelectSpline.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectSpline.ValueWithSnapData - Class in nxopen
-
- SelectSplineBeamProperty - Interface in nxopen.motion
-
Represents a single object selection.
- SelectSplineBeamProperty.ValueData - Class in nxopen.motion
-
- SelectSplineBeamProperty.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectSplineBeamProperty.ValueWithSnapData - Class in nxopen.motion
-
- SelectSplineList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectSpreadsheet() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
Returns the select spreadsheet
License requirements: None.
- selectStandardSetsSpreadsheet() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the standard sets spreadsheet
License requirements: None.
- selectStartLimit() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the select start limit.
- selectStartPlane() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the selected start plane.
- selectStartTrim() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the select start trim - used to trim the start of the section guide.
- selectStartTrim() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the select start trim
License requirements: None.
- selectStepWallReplmFace1() - Method in interface nxopen.features.StepBuilder
-
Returns the selected step wall replacement face 1
License requirements: None.
- selectStepWallReplmFace2() - Method in interface nxopen.features.StepBuilder
-
Returns the selected step wall replacement face 2
License requirements: None.
- SelectStock - Interface in nxopen.routing
-
Represents a single object selection.
- SelectStock.ValueData - Class in nxopen.routing
-
- SelectStock.ValueWithCaeSetObjectInfoData - Class in nxopen.routing
-
- SelectStock.ValueWithSnapData - Class in nxopen.routing
-
- selectStructures() - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
Returns the selected structure
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- SelectStructuresBuilder - Interface in nxopen.features.shipdesign
-
- selectSubDieBase() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the selected sub die base part.
- SelectSubdivisionBodyList - Interface in nxopen.features.subdivision
-
Represents a list of objects on a selection list.
- selectSubHoleFaceAutomatically() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the select sub-hole face automatically option
License requirements: None.
- selectSubTypeAsString() - Method in interface nxopen.blockstyler.SelectElement
-
Returns the SelectSubType as string
License requirements: None.
- selectSymbol(String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Selects custom symbol
License requirements: drafting ("DRAFTING")
.
- selectSymbol(String) - Method in interface nxopen.pid.LibraryAuthoringBuilder
-
Selects one 2D symbol or 3D symbol by the symbol ID
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- selectSymbolDefinition() - Method in interface nxopen.ame.ProjectEngineeringObjectBuilder
-
Returns the select eo symbol
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectSymmetryReference(NXObject) - Method in interface nxopen.features.CurveFinderBuilder
-
Selects entity for symmetry reference
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- SelectSystemObject - Interface in nxopen.mechatronics
-
Represents a single object selection.
- SelectSystemObject.ValueData - Class in nxopen.mechatronics
-
- SelectSystemObject.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics
-
- SelectSystemObject.ValueWithSnapData - Class in nxopen.mechatronics
-
- SelectTableSectionList - Interface in nxopen.annotations
-
Represents a list of objects on a selection list.
- SelectTagFormObject - Interface in nxopen.mechatronics
-
Represents a single object selection.
- SelectTagFormObject.ValueData - Class in nxopen.mechatronics
-
- SelectTagFormObject.ValueWithCaeSetObjectInfoData - Class in nxopen.mechatronics
-
- SelectTagFormObject.ValueWithSnapData - Class in nxopen.mechatronics
-
- selectTaggedObject(String, String, Selection.SelectionScope, boolean, boolean) - Method in interface nxopen.Selection
-
Select single tagged object.
- selectTaggedObject(String, String, Selection.SelectionScope, Selection.SelectionAction, boolean, boolean, Selection.MaskTriple[]) - Method in interface nxopen.Selection
-
Select single tagged object using filter defined by mask triples.
- selectTaggedObject(String, String, Selection.SelectionScope, boolean, Selection.SelectionType[]) - Method in interface nxopen.Selection
-
Select single tagged object using filter defined by selection type.
- SelectTaggedObject - Interface in nxopen
-
Represents a single object selection.
- SelectTaggedObject.ValueData - Class in nxopen
-
- SelectTaggedObject.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectTaggedObject.ValueWithSnapData - Class in nxopen
-
- SelectTaggedObjectData() - Constructor for class nxopen.Selection.SelectTaggedObjectData
-
- SelectTaggedObjectList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectTaggedObjects(String, String, Selection.SelectionScope, boolean, boolean) - Method in interface nxopen.Selection
-
Select tagged objects.
- selectTaggedObjects(String, String, Selection.SelectionScope, Selection.SelectionAction, boolean, boolean, Selection.MaskTriple[]) - Method in interface nxopen.Selection
-
Select tagged objects using filter defined by mask triples.
- selectTaggedObjects(String, String, Selection.SelectionScope, boolean, Selection.SelectionType[]) - Method in interface nxopen.Selection
-
Select tagged objects using filter defined by selection type.
- SelectTaggedObjectsData() - Constructor for class nxopen.Selection.SelectTaggedObjectsData
-
- selectTarget() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the select target
License requirements: None.
- selectTarget() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the target part selection
License requirements: None.
- selectTargetFace() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the select target face
License requirements: None.
- selectTargetFace() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the select target face.
- selectTargetFace() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the select Target Face.
- selectTargetFace() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder
-
Returns the select target face
License requirements: None.
- selectTargetFace() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the select target face.
- selectTargetFace() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the select target face
License requirements: None.
- selectTargetFace() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
Returns the selection object for the target face.
- selectTargetFaces() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the target faces (used only for: Faces2Surfaces, FacesBetweenSurfacesSurface, and FacesCentered)
License requirements: None.
- selectTargetFaces() - Method in interface nxopen.FlatteningBuilder
-
- selectTcResultFileToImport(String[], int) - Method in interface nxopen.uf.UFUi
-
- SelectTcResultFileToImportData() - Constructor for class nxopen.uf.UFUi.SelectTcResultFileToImportData
-
- selectText(int) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Selects the node index of custom symbol text
License requirements: drafting ("DRAFTING")
.
- selectThinnerPlate() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the select thinner plate
License requirements: None.
- selectTic(int) - Method in interface nxopen.annotations.AddTicBuilder
-
Stores index of the tic for adding the tic
License requirements: nx_ship_drafting ("Ship Drafting")
.
- SelectTirePropertyBasic - Interface in nxopen.motion
-
Represents a single object selection.
- SelectTirePropertyBasic.ValueData - Class in nxopen.motion
-
- SelectTirePropertyBasic.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectTirePropertyBasic.ValueWithSnapData - Class in nxopen.motion
-
- SelectTirePropertyCd - Interface in nxopen.motion
-
Represents a single object selection.
- SelectTirePropertyCd.ValueData - Class in nxopen.motion
-
- SelectTirePropertyCd.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectTirePropertyCd.ValueWithSnapData - Class in nxopen.motion
-
- SelectTirePropertyFt - Interface in nxopen.motion
-
Represents a single object selection.
- SelectTirePropertyFt.ValueData - Class in nxopen.motion
-
- SelectTirePropertyFt.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectTirePropertyFt.ValueWithSnapData - Class in nxopen.motion
-
- SelectTirePropertyMotorcycle - Interface in nxopen.motion
-
Represents a single object selection.
- SelectTirePropertyMotorcycle.ValueData - Class in nxopen.motion
-
- SelectTirePropertyMotorcycle.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectTirePropertyMotorcycle.ValueWithSnapData - Class in nxopen.motion
-
- SelectTirePropertyNonInertial - Interface in nxopen.motion
-
Represents a single object selection.
- SelectTirePropertyNonInertial.ValueData - Class in nxopen.motion
-
- SelectTirePropertyNonInertial.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectTirePropertyNonInertial.ValueWithSnapData - Class in nxopen.motion
-
- SelectTirePropertyTno - Interface in nxopen.motion
-
Represents a single object selection.
- SelectTirePropertyTno.ValueData - Class in nxopen.motion
-
- SelectTirePropertyTno.ValueWithCaeSetObjectInfoData - Class in nxopen.motion
-
- SelectTirePropertyTno.ValueWithSnapData - Class in nxopen.motion
-
- selectTool() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the select tool
License requirements: None.
- selectTool() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the tool part selection
License requirements: None.
- selectToolFlag() - Method in interface nxopen.cam.OperationBuilder
-
Returns the user selected tool
License requirements: None.
- selectTopParts() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the collector containing the primary bodies the bead is attached to.
- selectTrackingPoint(Tag, String) - Method in interface nxopen.uf.UFOper
-
- selectTransformationObjects() - Method in interface nxopen.FlatteningBuilder
-
- selectTranslateObject() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the selected objects to translate.
- selectTrimBounds() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the selected trim bounds.
- selectTrimFace() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the select trim face.
- selectTrimRegion(Point3d) - Method in interface nxopen.features.TrimCurve2Builder
-
The function sets help point for region select.
- selectType() - Method in interface nxopen.ame.ExtractAttributeRelativeBuilder
-
Returns the object to hold the attribute list to select the attribute name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- selectTypes() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the types of tool to select
License requirements: None.
- selectUserDefinedDieInsertForEdit() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the select user defined insert to edit
License requirements: None.
- selectUserDefinedDieInsertForEdit() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the selected user defined die insert to edit.
- selectUV() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the UV flag
License requirements: None.
- selectVector() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the select vector
License requirements: None.
- selectVector() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the select vector
License requirements: None.
- selectView() - Method in interface nxopen.drafting.SmashDrawingViewBuilder
-
Returns the select drawing views to smash
License requirements: None.
- selectView() - Method in interface nxopen.drawings.SheetZoneReferenceBuilder
-
Returns the select view
License requirements: None.
- selectView() - Method in interface nxopen.drawings.ViewOrientationBuilder
-
Returns the select view
License requirements: None.
- SelectView - Interface in nxopen
-
Represents a single object selection.
- selectView() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
Returns the select view
License requirements: None.
- selectView() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the selected view
License requirements: None.
- SelectView.ValueData - Class in nxopen
-
- SelectView.ValueWithCaeSetObjectInfoData - Class in nxopen
-
- SelectView.ValueWithSnapData - Class in nxopen
-
- SelectViewList - Interface in nxopen
-
Represents a list of objects on a selection list.
- selectWeldFace() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the select weld face
License requirements: nx_masterfem ("Finite Element Modeling")
.
- SelectWeldsBuilder - Interface in nxopen.tooldesigner
-
SelectWeldsBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSelectWeldsBuilder
Default values.
- selectWindshield() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the windshield collector which the v points will be projected onto.
- selectWorkPieceBody() - Method in interface nxopen.tooling.WorkpieceBuilder
-
Returns the work piece body selection
License requirements: None.
- SELF_CONTAINED - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.DrawingTypes
-
- SELF_CONTAINED - Static variable in class nxopen.tooling.CompDrawingBuilder.DrawingType
-
with self-contained drawing
- SELF_CONTAINED - Static variable in class nxopen.tooling.EjectorTableBuilder.DrawingType
-
self contained drawing
- SELF_CONTAINED - Static variable in class nxopen.tooling.EWDraftingBuilder.DrawingOption
-
self contained
- SELF_REFERENCED - Static variable in class nxopen.assemblies.productinterface.InterfaceObject.InvalidState
-
product interface references itself
- SELF_REFIT - Static variable in class nxopen.uf.UFModl.QuiltType
-
- selFace() - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
Returns the selected replacement face.
- selfHidden() - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Returns the status of self hidden.
- selfHidden() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
Returns the self hidden toggle on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
- selfHidden() - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Returns the status of self hidden.
- selfIntersection() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Standard Drive Self-Intersect Status
License requirements: None.
- selfIntersectionChecking() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the option of self-intersection checking
License requirements: None.
- selfIntersections() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the option to identify or repair facets of the same mesh intersecting each other
License requirements: None.
- selFootType() - Method in interface nxopen.tooling.SubInsertBuilder
-
Returns the foot type which can be a box or a cylinder
License requirements: None.
- selOutline() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the selected outline.
- selPlanarFaces() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the planar faces selected as the start of automatic recognition.
- selPref() - Method in interface nxopen.BasePart
-
Returns the Display.SelPrefCollection instance belonging to this part
Created in NX3.0.0
- SelPref - Interface in nxopen.display
-
- SelPref.FaceAnalysisViews - Class in nxopen.display
-
Represents the face analysis views type
- SelPref.Method - Class in nxopen.display
-
Represents the chaining method type
- SelPref.MouseGesture - Class in nxopen.display
-
Represents the mouse gesture type
- SelPref.SelectionRadius - Class in nxopen.display
-
Represents the selection radius type
- SelPref.SelectionRule - Class in nxopen.display
-
Represents the selection rule type
- SelPref.ShadedViews - Class in nxopen.display
-
Represents the shaded views type
- SelPrefCollection - Interface in nxopen.display
-
Represents a collection SelPref
To obtain an instance of this class, refer to
BasePart
Created in NX5.0.0
- selSheetBody() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the selected sheet body.
- selToFace() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Returns the selected 'to' face
License requirements: None.
- selType() - Method in interface nxopen.tooling.EdgePatchBuilder
-
Returns the patch type of the edge patch creation.
- selType() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Returns the copy type
License requirements: None.
- SEMI_AUTOMATIC - Static variable in class nxopen.visualreporting.Classifier.GroupingMethodOption
-
Grouping is automatic but some
GroupLabel
s have been modified
- SEMI_CIRCULAR - Static variable in class nxopen.tooling.RunnerBuilder.SectionType
-
Use semicircular section type.
- SEMI_COLON - Static variable in class nxopen.ame.GeneralAnnotationSettingsBuilder.AnnotationSeparator
-
- SEMI_COLON - Static variable in class nxopen.ame.GeneralAnnotationSettingsBuilder.SourceAndTargetSeparator
-
- SEMI_PIERCE_PUNCH - Static variable in class nxopen.uf.UFModl.PunchType
-
- semiConjugateLength() - Method in interface nxopen.Hyperbola
-
Returns the semi-conjugate length.
- semiMajor() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the semi the semi major size of an ellipse shaped bead.
- semiMinor() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the semi minor size of an ellipse shaped bead.
- semiTransverseLength() - Method in interface nxopen.Hyperbola
-
Returns the semi-transverse length.
- sendbufsize - Variable in class nxopen.mechatronics.TCPClientBuilder.ConnectionInformationData
-
- sendbufsize - Variable in class nxopen.mechatronics.TCPSignalServerBuilder.ConnectionInformationData
-
- sendbufsize - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.ConnectionInformationData
-
- sendbufsize - Variable in class nxopen.mechatronics.UDPSignalServerBuilder.ConnectionInformationData
-
- sendLayoutsTo() - Method in interface nxopen.DxfdwgImporter
-
Returns the SendLayoutsTo command - this will determine the destination for the layout data
License requirements: None.
- sendModelDataTo() - Method in interface nxopen.DxfdwgImporter
-
Returns the SendModelDataTo command - this will determine the destination for model data
License requirements: None.
- sendToMachine() - Method in interface nxopen.mfg.am.BuildTray
-
Sends the output files to the printer
License requirements: am_pb_cam_basic ("Basic NX Powder Bed Additive Manufacturing Application")
.
- sendToSubView(int, NavigatorNode) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Send node to sub view.
- sendToWorkflow(String) - Method in interface nxopen.issue.IssueContent
-
Sends the issue to workflow process
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- sendToWorkflowRequests(PenetrationRequest[]) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Send to Workflow the requests
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- sense() - Method in interface nxopen.Direction
-
Returns the sense of the direction.
- sense - Variable in class nxopen.facet.FacetedFace.SurfaceData
-
- Sense - Class in nxopen
-
Specifies sense direction .
- sense - Variable in class nxopen.uf.UFCurve.ConvertConicToStdData
-
- sense - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
-
- sense - Variable in class nxopen.uf.UFFacet.FindEdgeInFacetData
-
- SENSITIVE - Static variable in class nxopen.menubar.MenuButton.SensitivityStatus
-
The button is sensitive.
- SENSITIVITY - Static variable in class nxopen.cae.optimization.TBSOptimizationSolutionBuilder.StrategyType
-
Uses sensitivity strategy to run optimization
- sensitivity() - Method in interface nxopen.uistyler.ColorTool
-
Returns the sensitivity
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.GroupBox
-
Returns the sensitivity
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.IntegerItem
-
Returns the sensitivity of Integer item
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.IntegerScale
-
Returns the sensitivity of the dialog item.
- sensitivity() - Method in interface nxopen.uistyler.LabelItem
-
Returns the seisitivity of the dialog item
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.MultiSelectList
-
Returns the senstivity
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.MultiTextBox
-
Returns the sensitivity of the dialog item.
- sensitivity() - Method in interface nxopen.uistyler.PropertyPage
-
Returns the sensitivity of property page.
- sensitivity() - Method in interface nxopen.uistyler.PushButton
-
Returns the senstivity of dialog.
- sensitivity() - Method in interface nxopen.uistyler.RealItem
-
Returns the sensitivity
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.RealScale
-
Returns the sensitivity
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.RowColumn
-
Returns the sensitivity
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.ScrolledWindow
-
Returns
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.SelectionBox
-
Returns the sensitivity of the selection box
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.SingleSelectList
-
Returns the sensitivity of the single select list
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.TabControl
-
Returns the sensitivity of the dialog item
License requirements: None.
- sensitivity() - Method in interface nxopen.uistyler.WideString
-
Returns the sensitivity of the wide string
License requirements: None.
- Sensor - Interface in nxopen.cae.responsesimulation
-
Represents a
Sensor
To create or edit an instance of this class, use
SensorBuilder
Created in NX5.0.0
- sensor() - Method in interface nxopen.cae.responsesimulation.SensorEvaluationSettingBuilder
-
Returns the destination sensor
License requirements: nx_response_anlys ("NX Response Analysis")
.
- sensor() - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder
-
- SENSOR - Static variable in class nxopen.motion.PlantOutputBuilder.Poutype
-
sensor type
- sensor() - Method in interface nxopen.motion.PlantOutputBuilder
-
Returns the sensor
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- sensor() - Method in interface nxopen.motion.SignalChartListItem
-
Returns the sensor
License requirements: nx_motion_motor ("NX Motion Motor")
.
- SENSOR_SELECT - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a statement defining a sensor selection statement
- sensorActuatorList() - Method in interface nxopen.mechatronics.ExportSensorsActuatorsBuilder
-
Returns the sensor actuator builder list
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- SensorBuilder - Interface in nxopen.cae.responsesimulation
-
- SensorCollection - Interface in nxopen.cae.responsesimulation
-
Represents a collection of response analysis sensor
To obtain an instance of this class, refer to
Manager
Created in NX5.0.0
- sensorCoordinateType() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the sensor's coordinate type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- SensorCoordinateType - Class in nxopen.cae.responsesimulation
-
Specifies the coordinate type of Sensor
- sensorDirectionX() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the setting for x direction compontent of sensor.
- sensorDirectionY() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the setting for y direction compontent of sensor.
- sensorDirectionZ() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the setting for z direction compontent of sensor.
- SensorEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the parameters setting for sensor evaluation.
- SensorEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- sensorGroup() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the sensor group
License requirements: None.
- sensorName() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the sensor name
License requirements: None.
- sensorName() - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
Returns the sensor name
License requirements: None.
- sensorOpLabel() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the sensor label
License requirements: None.
- sensorOpName() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the inspection sensor operation name
License requirements: None.
- sensorOpName() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the inspection sensor operation name
License requirements: None.
- sensorOpName() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the inspection sensor operation name
License requirements: None.
- sensorParent() - Method in interface nxopen.die.RotorBuilder
-
Returns the sensor parent builder of the rotor.
- sensorResultType() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the sensor's result type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- SensorResultType - Class in nxopen.cae.responsesimulation
-
Specifies the result type of Sensor
- sensorRotationX() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the setting for x rotation compontent of sensor.
- sensorRotationY() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the setting for y rotation compontent of sensor.
- sensorRotationZ() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the setting for z rotation compontent of sensor.
- sensors() - Method in interface nxopen.cae.responsesimulation.Manager
-
Returns the Response Dynamics sensor collection belonging to this sim part .
- SensorsActuatorsListBuilder - Interface in nxopen.mechatronics
-
- SensorsActuatorsListBuilder.ParameterData - Class in nxopen.mechatronics
-
Defines the parameter data.
- SensorsActuatorsListBuilderList - Interface in nxopen.mechatronics
-
Represents a list of objects.
- sensorSelectionConfigs() - Method in interface nxopen.cae.PreTestSensorSelectionControl
-
The sensor configuration collection .
- sensorSelectionControl() - Method in interface nxopen.cae.PreTestSolution
-
The sensor selection configuration setup for this pre-test setup .
- sensorStrategy() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the sensor selection strategy
License requirements: None.
- sensorStrategy() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the sensor selection strategy
License requirements: None.
- sensorStrategy() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the sensor selection strategy
License requirements: None.
- sensorStrategy() - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
Returns the sensor strategy
License requirements: None.
- sensorStrategyBuilder() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the Sensor Strategy Enum Builder
License requirements: None.
- sensorTipDiameter() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the sensor tip diameter
License requirements: None.
- sensorTipLength() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the sensor tip length
License requirements: None.
- sensorTipLocation() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the sensor tip location method
License requirements: None.
- sensorTipSize() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the sensor tip size
License requirements: None.
- sensorTipType() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the sensor tip type
License requirements: None.
- sensorType() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the sensor's type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- SensorType - Class in nxopen.cae.responsesimulation
-
Specifies the type of Sensor
- sensorType() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the sensor type
License requirements: None.
- sensorVector() - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Returns the user defined direction.
- SEP - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- SEP1 - Static variable in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
-
separate one
- SEP1 - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
separate one
- SEP1 - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType
-
Warning
- SEP2 - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
separate two
- SEP2 - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType
-
Retract
- SEP_REQT - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- SEPARATE - Static variable in class nxopen.cae.DurSpecialistLocalDefinitionByGroupBuilder.LocalDefinitionType
-
generate a local definition for each group
- SEPARATE - Static variable in class nxopen.cae.xyplot.Preference.TargetGraphicWindowOption
-
Only shows plot graph on a separate graphic window
- SEPARATE - Static variable in class nxopen.SectionCollection.LoopOption
-
One section is created for each loop
- SEPARATE_FACE - Static variable in class nxopen.features.shipdesign.ProfileTransitionBuilder.FeatureModeType
-
Create web trim on target body and face plate in a separate part.
- SEPARATE_FACES - Static variable in class nxopen.uf.UFSf.FaceSubdivStatus
-
- SEPARATE_FEATURE_FOR_EACH_BODY - Static variable in class nxopen.features.ExtractFaceBuilder.FeatureOptionType
-
An option to create a separate extracted or linked body feature per single body
- SEPARATE_FEATURE_FOR_EACH_BODY - Static variable in class nxopen.features.MirrorBodyBuilder.FeatureOptionType
-
An option to create a separate mirror or linked mirror body feature per single body
- SEPARATE_FROM_CORNER - Static variable in class nxopen.features.EdgeBlendBuilder.Setback
-
Separate from corner
- SEPARATE_OUTER - Static variable in class nxopen.SectionCollection.LoopOption
-
One section per outer loop and enclosed inner loops
- SEPARATE_WEB_AND_FACE - Static variable in class nxopen.features.shipdesign.ProfileTransitionBuilder.FeatureModeType
-
Create in separate parts for web and face plate.
- SEPARATED - Static variable in class nxopen.cae.SimLoadRecipeLbcGenerator.LbcHierarchyTypes
-
Separated LBCs
- separator() - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Returns the separator type
License requirements: None.
- Separator - Interface in nxopen.blockstyler
-
Represents a Separator block .
- separator() - Method in interface nxopen.drawings.ViewSettingsBuilder
-
Returns the separator string
License requirements: None.
- SEPARATOR - Static variable in class nxopen.menubar.ContextMenuEntry.Type
-
A visual divider between sections of the menu.
- SEPARATOR - Static variable in class nxopen.menubar.MenuButton.Type
-
- SEPARATOR - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- Separator - Interface in nxopen.uistyler
-
Represents a Separator for UI Styler .
- SEPARATOR - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Separator item
- SeqInput() - Constructor for class nxopen.uf.UFSmd.SeqInput
-
- SeqInput(double, Tag, String, String, String) - Constructor for class nxopen.uf.UFSmd.SeqInput
-
- seqLabels - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- SEQNO_AUTO - Static variable in class nxopen.uf.UFPath.Seqno
-
- SEQNO_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Seqno
-
- SEQNO_N - Static variable in class nxopen.uf.UFPath.Seqno
-
- SEQNO_OFF - Static variable in class nxopen.uf.UFPath.Seqno
-
- SEQNO_ON - Static variable in class nxopen.uf.UFPath.Seqno
-
- SeqOutput() - Constructor for class nxopen.uf.UFSmd.SeqOutput
-
- SeqOutput(double, double, double, double, Tag, String, String, String, String, String) - Constructor for class nxopen.uf.UFSmd.SeqOutput
-
- SEQUENCE - Static variable in class nxopen.cae.AfuData.AbscissaType
-
The abscissa value is a sequence and input by user.
- sequence() - Method in interface nxopen.cam.BlendFinish
-
Returns the Sequence
License requirements: None.
- sequence() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the Sequence
License requirements: cam_base ("CAM BASE")
.
- Sequence - Interface in nxopen.cam
-
Represents Sequence Builder .
- sequence() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut sequence
License requirements: None.
- SEQUENCE - Static variable in class nxopen.preferences.RoutingPart.FabricationNumbering
-
Sequential numbering of fabrications in the parts list.
- Sequence.Types - Class in nxopen.cam
-
Available types for Sequencing .
- SEQUENCED - Static variable in class nxopen.cae.Post.Abcissa
-
- sequenceDirection() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the point sequence start direction
License requirements: None.
- sequenceMethod() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the sequence method specified in the UI for the labels
License requirements: routing_hvac ("Routing HVAC")
.
- sequenceNumber - Variable in class nxopen.uf.UFDrf.ArcInfo
-
- sequenceNumber - Variable in class nxopen.uf.UFDrf.ArrowInfo
-
- sequenceNumber - Variable in class nxopen.uf.UFDrf.DraftAidLine
-
- sequenceNumber() - Method in interface nxopen.weld.GrooveBuilder
-
- sequenceNumber() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the sequence number for the weld point feature.
- sequenceOptimization() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns the path point sequence optimization setting
License requirements: None.
- sequenceOptimization() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the path point sequence optimization setting
License requirements: None.
- sequences - Variable in class nxopen.uf.UFAssem.AskSequencesInPartData
-
- sequenceStart() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the point sequence start location
License requirements: None.
- SEQUENTIAL - Static variable in class nxopen.annotations.BillOfMaterialBuilder.FabricationNumberingType
-
- SEQUENTIAL - Static variable in class nxopen.cae.CorrelModePairingBuilder.Auto
-
by mode numbers
- SEQUENTIAL_COMPONENT - Static variable in class nxopen.assemblies.Order.Type
-
System defined sequential component order
- SEQUENTIAL_PROC_INVALID_OPTION - Static variable in class nxopen.uf.UFSmd.PipSequentialE
-
- SEQUENTIAL_PROC_NUM_ITEMS - Static variable in class nxopen.uf.UFSmd.PipSequentialE
-
- SEQUENTIAL_PROCESS - Static variable in class nxopen.uf.UFSmd.PipSequentialE
-
- SERIES - Static variable in class nxopen.tooling.ReusablePocketBuilder.Hole
-
Pocket with hole series
- SERIES_OF_COORDINATES - Static variable in class nxopen.cae.connections.LocationType
-
Series Of Coordinates
- SERIES_OF_NODES - Static variable in class nxopen.cae.connections.LocationType
-
Series Of Nodes
- SERIES_OF_POINTS - Static variable in class nxopen.cae.connections.LocationType
-
Series Of Points
- seriesSpacing() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the section plane spacing in the current section series.
- SERVER_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Server Property defined in server side report
- serverProgID() - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Returns the server prog ID.
- serverType() - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Returns the server type.
- ServiceOrientedBodyFeature - Interface in nxopen.features
-
- ServiceOrientedBodyFeatureBuilder - Interface in nxopen.features
-
- ServiceOrientedFeatureCurve - Interface in nxopen.features
-
- ServiceOrientedFeatureCurveBuilder - Interface in nxopen.features
-
- SESSION - Static variable in class nxopen.options.OptionsScope
-
Option scope is session
- Session - Interface in nxopen
-
Represents the NX session.
- Session.MarkVisibility - Class in nxopen
-
Indicates the visibility of an undo mark
- Session.NamedPropertiesData - Class in nxopen
-
- Session.ProjectAssignmentObjectType - Class in nxopen
-
Indicates whether project assignment is for item, item revision or dataset
- Session.ProjectAssignmentState - Class in nxopen
-
Indicates project assignment state
- Session.TransientPartPolicy - Class in nxopen
-
Persistence policies for transient modified parts
- Session.UndoLastNVisibleMarksData - Class in nxopen
-
- Session.UndoMarkData - Class in nxopen
-
This structure contains data about an undo mark
- SESSION_DELAYED - Static variable in class nxopen.uf.UFWave.DelayStatus
-
- SESSION_FROZEN - Static variable in class nxopen.uf.UFWave.DelayStatus
-
- SessionAssemblies - Interface in nxopen.preferences
-
Represents the set of Assemblies Preferences applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX3.0.0
- SessionAssemblies.DragHandlePositionOption - Class in nxopen.preferences
-
Specify whether drag handle will be positioned at the center of bounding box or origin of component
- SessionAssemblies.PartNameOption - Class in nxopen.preferences
-
Describe whether the part name style is file name or description or specified
- SessionAssemblies.PositioningTaskCollectionOptionForDesignElements - Class in nxopen.preferences
-
Specify whether Design Elements will be added to the Work or Context Collection of a Positioning Task
- sessionDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
-
The part is delayed because geometry and expressions are delayed.
- SessionDrafting - Interface in nxopen.preferences
-
Represents the set of Drafting preferences applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX3.0.0
- SessionDrafting.AnnotationStyleType - Class in nxopen.preferences
-
Describes the available types for annotation style preference
- SessionDrafting.EdgeFaceDisplayType - Class in nxopen.preferences
-
Describes the available edge face display types
- SessionDrafting.GridObjectType - Class in nxopen.preferences
-
Describes the available grid objects
- SessionFactory - Class in nxopen
-
Used to obtain an initial reference to a session object.
- SessionFactory() - Constructor for class nxopen.SessionFactory
-
- sessionMeasureReq() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Measure Requirements in Assembly Sequencing applicable to the entire session .
- SessionMeasureRequirements - Interface in nxopen.preferences
-
Represents the two options available on the Measure Requirements toolbar and applicable to the entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX5.0.0
- SessionMeasureRequirements.ActionOnViolation - Class in nxopen.preferences
-
Values for the action to take when a requirement error is generated for a measure with a displayed
annotation in Assembly Sequencing.
- SessionModeling - Interface in nxopen.preferences
-
Represents the set of Modeling preferences applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX3.0.0
- SessionModeling.BodyTypeOption - Class in nxopen.preferences
-
Describes whether the body type is solid or sheet
- SessionModeling.BooleanFacePropertiesInheritance - Class in nxopen.preferences
-
Describes whether the display of Boolean Face properties inherits from target body or tool body
- SessionModeling.CurveFitMethodType - Class in nxopen.preferences
-
Describes whether the Curve Fit Method type is selected as cubic or quintic or advanced
- SessionModeling.DeleteChildFeaturesOptionType - Class in nxopen.preferences
-
Options for controling delete child features, including recipe curves, of a feature being deleted
- SessionModeling.DynamicUpdateType - Class in nxopen.preferences
-
Describes whether the Dynamic Update type is not selected or selected as incremental or continuous
- SessionModeling.EndpointDisplayStyleType - Class in nxopen.preferences
-
Styles for display endpoints of curves
- SessionModeling.FreeFormConstructionResultType - Class in nxopen.preferences
-
Describes whether the Free Form Construction Result is plane or B Surface
- SessionModeling.ImmediateChildrenType - Class in nxopen.preferences
-
Describes whether the Immediate Children type is selected for first level or for all
- SessionModeling.LinkedAndExtractedGeometryPropertiesInheritance - Class in nxopen.preferences
-
Describes whether the display of linked and extracted geometry properties inherits from parent object or part default
- SessionModeling.NewFacePropertiesInheritance - Class in nxopen.preferences
-
Describes whether the display of New Face properties inherits from body or part default
- SessionModeling.PoleDisplayStyleType - Class in nxopen.preferences
-
Styles for display poles of B curves and B surfaces
- SessionModeling.PoleEditStyleType - Class in nxopen.preferences
-
Styles for edit poles of B curves and B surfaces
- SessionModeling.PolylineStyleType - Class in nxopen.preferences
-
Styles for polylines of B curves and B surfaces
- SessionModeling.PreviewResolutionType - Class in nxopen.preferences
-
Freeform preview resolutions
- SessionModeling.SaveDataForFeatureEditOption - Class in nxopen.preferences
-
Options for controling what additional data needs to be saved in part file to enhance the feature edit
- SessionModeling.ShareGeometriesOnSaveType - Class in nxopen.preferences
-
Options for saving a part file with sharing of geometry data to reduce file size
- SessionModeling.SketchDefaultActionType - Class in nxopen.preferences
-
Double click action for sketches
- SessionModeling.SketchEditType - Class in nxopen.preferences
-
Edit option for sketches
- SessionModeling.SplineDefaultActionTypes - Class in nxopen.preferences
-
Specifies the command that should be invoked when double-clicking on a spline.
- SessionModeling.SurfaceExtensionOption - Class in nxopen.preferences
-
Options for controling how surfaces will be extended while moving geometry
- SessionNXGateway - Interface in nxopen.preferences
-
Represents the set of NXGateway Preferences applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX3.0.0
- SessionPdm - Interface in nxopen.preferences
-
Represents the NX Manager preferences for the entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX4.0.1
- SessionPdm.JtUpdateFromSourceType - Class in nxopen.preferences
-
Options for the kind of JT update performed when a part is loaded
- SessionPdm.MessagesInconsistentRevisionsType - Class in nxopen.preferences
-
Options for the kind of messages about inconsistent revisions when a part is loaded
- SessionPdm.SynchroniseOnLoadType - Class in nxopen.preferences
-
Options for the kind of synchronisation with the PDM system performed
when a part is loaded.
- SessionPdm.SynchroniseOnSaveType - Class in nxopen.preferences
-
Options for the kind of synchronisation with the PDM system performed
when a part is saved.
- SessionPdm.UnpopulatedBehaviourType - Class in nxopen.preferences
-
Options for when to add NX datasets upon loading an unpopulated part in the PDM system
- SessionPmi - Interface in nxopen.preferences
-
Represents the set of PMI preferences applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX4.0.0
- SessionPreferences - Interface in nxopen.preferences
-
Represents a collection of session based preferences.
- SessionSettings - Interface in nxopen.pdm
-
Values for the settings that affect the current Teamcenter session.
- SessionSketch - Interface in nxopen.preferences
-
Represents the set of sketch preferences applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX3.0.0
- SessionSketch.BackgroundType - Class in nxopen.preferences
-
Describes the available sketch background types.
- SessionSketch.GroupConstraintType - Class in nxopen.preferences
-
Represents the constraint management option when creating a rigid or scalable sketch group.
- SessionSketch.OriginType - Class in nxopen.preferences
-
Describes the available sketch origin types.
- SessionSketch.RigidSetConstraintType - Class in nxopen.preferences
-
- SessionUserInterface - Interface in nxopen.preferences
-
Represents the set of User Interface preferences applicable to entire session.
- SessionUserInterface.JournalFileFormatType - Class in nxopen.preferences
-
Describes the available format types for a journal file
- SessionUserInterface.JournalLanguageType - Class in nxopen.preferences
-
Describes the language used to record journals
- SessionUserInterfaceUI - Interface in nxopen.preferences
-
Represents all UI based session user interface preferneces.
- SessionUserInterfaceUI.DisplayResourceBar - Class in nxopen.preferences
-
Describes whether the resource bar is displayed on left or right of window
- SessionVisualizationColorSetting - Interface in nxopen.preferences
-
- SessionVisualizationEmphasis - Interface in nxopen.preferences
-
Represents visualization preferences for emphasis that are applicable
to the entire session.
- SessionVisualizationHighEndRendering - Interface in nxopen.preferences
-
Represents the set of visualization preferences under High End Rendering tab applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX11.0.1
- SessionVisualizationHighEndRendering.MaterialEditorEditingMode - Class in nxopen.preferences
-
The two Studio Material Editor editing modes
- SessionVisualizationHighQualityImage - Interface in nxopen.preferences
-
Represents the High Quality Image preferences for the entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX4.0.0
- SessionVisualizationHighQualityImage.ImageSizeData - Class in nxopen.preferences
-
- SessionVisualizationHighQualityImage.ImageSizeType - Class in nxopen.preferences
-
The size at which to generate a High Quality Image.
- SessionVisualizationHighQualityImage.OrientationType - Class in nxopen.preferences
-
Whether the High Quality Image is to be generated with
portrait or landscape orientation
- SessionVisualizationHighQualityImage.PlotQualityType - Class in nxopen.preferences
-
Describes the quality desired when plotting the High Quality Image
- SessionVisualizationHighQualityImage.ResolutionData - Class in nxopen.preferences
-
- SessionVisualizationHighQualityImage.ResolutionType - Class in nxopen.preferences
-
The resolution to use when generating a High Quality Image.
- SessionVisualizationPerformance - Interface in nxopen.preferences
-
Represents visualization performance preferences that are applicable
to the entire session.
- SessionVisualizationScreen - Interface in nxopen.preferences
-
Represents the set of visualization preferences under screen tab applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX3.0.0
- SessionVisualizationScreen.ViewTriadLocation - Class in nxopen.preferences
-
- SessionVisualizationShade - Interface in nxopen.preferences
-
Represents the UI related Visualization Shade preferences.
- SessionVisualizationSpecialEffects - Interface in nxopen.preferences
-
Represents the set of visualization special effect preferences applicable to entire session.
- SessionVisualizationVisual - Interface in nxopen.preferences
-
Represents all UI based session Visualization visual preferences
To obtain an instance of this class, refer to
UI
Created in NX3.0.0
- SessionVisualizationVisual.ViewFromPointData - Class in nxopen.preferences
-
- SessionWorkPlane - Interface in nxopen.preferences
-
- SessionWorkPlane.ObjectDisplay - Class in nxopen.preferences
-
- SET - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsEndReleaseState
-
Set end release values.
- SET - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.ColorType
-
set color type
- set1() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the set1
License requirements: None.
- SET1 - Static variable in class nxopen.weld.FilletBuilder.EnumFillFaceHolesType
-
- set1IsCollector - Variable in class nxopen.uf.UFCurve.AskIntParmsScData
-
- set2() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the set2
License requirements: None.
- SET2 - Static variable in class nxopen.weld.FilletBuilder.EnumFillFaceHolesType
-
- set2dContact(Tag, UFMotion.Motion2DContact) - Method in interface nxopen.uf.UFMotion
-
- set2dValue(Tag, int, double[]) - Method in interface nxopen.uf.UFParam
-
- set2IsCollector - Variable in class nxopen.uf.UFCurve.AskIntParmsScData
-
- set3dContact(Tag, UFMotion.Motion3DContact) - Method in interface nxopen.uf.UFMotion
-
- set3dContactMethod(UFMotion.ContactMethod, int) - Method in interface nxopen.uf.UFMotion
-
- set3dValue(Tag, int, double[]) - Method in interface nxopen.uf.UFParam
-
- SET_BASE_POINT - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types
-
the type of set the base point of the blank
- SET_DISPLAY_PART_ONLY_WHEN_OPEN - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.OpenPartType
-
Set the opened part as display part only when it doesn't exist in the session
- SET_FRAME - Static variable in class nxopen.cae.Post.AnimationControl
-
- SET_MANAGER - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- SET_MARKER - Static variable in class nxopen.cam.ToolpathEventType
-
- SET_OF_POINTS - Static variable in class nxopen.cae.connections.NodalTargetType
-
Set of Points
- SET_OF_VALUES - Static variable in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions
-
- SET_PCSTO_CADABS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Set the PCS to Cadabs
- SET_PCSTO_CSYS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Set the PCS to a NX Csys
- SET_PCSTO_MCS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Set the PCS to Machine CS
- setA1(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setA1(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setA2(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setA2(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setAASamplesEnum(StudioImageCaptureBuilder.AASamplesEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder
-
License requirements: None.
- setAAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setAbortOnFailure(boolean) - Method in interface nxopen.LoadOptions
-
Sets the option that specifies what action the system should take if
it can't find a component part file
License requirements: None.
- setAbove(String[]) - Method in interface nxopen.annotations.AppendedTextBuilder
-
Sets the appended text above the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setAboveText(String[]) - Method in interface nxopen.annotations.AppendedText
-
Sets the appended text above the annotation
License requirements: None.
- setAboveText(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setAboveTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setAbs(boolean) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setAbscissaAndOrdinateAxisDefinition(XyFunctionUnit, AfuData.OrdinateType, XyFunctionUnit, XyFunctionUnit) - Method in interface nxopen.cae.AfuData
-
Set the Abscissa and Ordinate Axis definitions of an AFU Data Record
License requirements: None.
- setAbscissaCustomMarkerLabel(String) - Method in interface nxopen.cae.xyplot.PlotGraphTemplate
-
License requirements: None.
- setAbsCustomerRange(String[]) - Method in interface nxopen.cae.xyplot.ArgumentAxisStyleSetting
-
Sets the abscissa customer range
License requirements: None.
- setAbsoluteConvergence(double) - Method in interface nxopen.cae.optimization.DAOStopCondition
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setAbsoluteConvergenceCriteria(double) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setAbsolutelyPosition(boolean) - Method in interface nxopen.assemblies.AbsolutePositionBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setAbsoluteMaximumPrincipalAngle(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setAbsoluteMaximumPrincipalStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setAbsoluteMaximumPrincipalStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setAbsoluteMaximumShearStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setAbsoluteMaximumShearStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setAbsoluteTextSize(double, double) - Method in interface nxopen.display.TransientText
-
Sets the size of the text, in absolute coordinates, in units of the displayed part.
- setAbsoluteValue(boolean) - Method in interface nxopen.cae.CrossSectionParameters
-
Set all values to absolute values.
- setAbsoluteValue(boolean) - Method in interface nxopen.cae.ResultMeasureResultOptions
-
Set the option to use absolute values
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setAbsoluteValue(boolean) - Method in interface nxopen.cae.ResultParameters
-
Set all values to absolute values.
- setAbsPercentage(double) - Method in interface nxopen.cae.xyplot.MarkerStyleSetting
-
License requirements: None.
- setAbsValueFilter(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setAbsValueSort(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setAbsXValue(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setAbsYValue(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setAbsZValue(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setAcadLayoutsToImport(String) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setAccelerated(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setAccelerationColor(int) - Method in interface nxopen.preferences.SessionModeling
-
Sets the acceleration color
License requirements: None.
- setAccessibilityVectors(Tag, UFVariant, int, Tag[]) - Method in interface nxopen.uf.UFFbmGeom
-
- setAccessKeys(AttributeTemplatesBuilder.AccessKey[]) - Method in interface nxopen.AttributeTemplatesBuilder
-
Set the access keys.
- setAccessTypeValue(AccessorEvaluatorBuilder.AccessType) - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAccessVectorMethod(SurfaceContourBuilder.AccessVectorMethodType) - Method in interface nxopen.cam.SurfaceContourBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAccuracy(double) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setAccuracy(double) - Method in interface nxopen.MassPropertiesBuilder
-
License requirements: None.
- setAccuracy(double) - Method in interface nxopen.mfg.am.Nester3D
-
License requirements: am_pb_mtls_nest_3d_2 ("Advanced NX Powder Bed Additive 3D Nesting") OR am_pb_mtls_nest_3d_1 ("Basic NX Powder Bed Additive 3D Nesting")
.
- setAcisVersion(AcisExporter.AcisVersionOption) - Method in interface nxopen.AcisExporter
-
License requirements: None.
- setAcousticalWeighting(FemSignalProcessingSignalAttributes.AcousticalWeightings) - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes
-
License requirements: None.
- setAcousticalWeighting(SimLoadRecipeFunctionAttributes.AcousticalWeightings) - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes
-
License requirements: None.
- setAcousticModeIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setAcrossAssemblies(boolean) - Method in interface nxopen.routing.TransformPathBuilder
-
Sets the flag that indicates whether or not to transform. across the assemblies
License requirements: routing_base ("Routing Basic")
Created in NX8.0.0
- setAction(ResultsManipulationBuilder.Action) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
- setAction(LowerLimit.ActionTypes) - Method in interface nxopen.cam.LowerLimit
-
License requirements: cam_base ("CAM BASE")
.
- setAction(CGMBuilder.ActionOption) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setAction(PrintPDFBuilder.ActionOption) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setAction(String, UFClone.Action, String) - Method in interface nxopen.uf.UFClone
-
- setActionCsys(CoordinateSystem) - Method in interface nxopen.motion.ScalarForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionCsys(CoordinateSystem) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionEnableMaxFacetSize(boolean) - Method in interface nxopen.motion.BodyContactLms
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionOnError(ConversionProcessSettingsBuilder.ActionOnErrorEnum) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setActionPoint(Point) - Method in interface nxopen.motion.BeamForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionPoint(Point) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionPoint(Point) - Method in interface nxopen.motion.ConnectorBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionPoint(Point) - Method in interface nxopen.motion.ScalarForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionPoint(Point) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionTessellationFile(String) - Method in interface nxopen.motion.BodyContactLms
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionType(MarkAsTemplateBuilder.ActionTypeEnum) - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
License requirements: drafting ("DRAFTING")
.
- setActionType(int) - Method in interface nxopen.GroupBuilder
-
License requirements: None.
- setActionType(int) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setActionType(PackagingInterferenceBuilder.Action) - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
- setActionType(EjectorPostProcessingBuilder.TrimMethod) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
License requirements: None.
- setActionType(ElectrodeInitializationBuilder.Method) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setActionType(TrimMoldComponentsBuilder.TrimMethod) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
License requirements: None.
- setActionType(TrimSolidBuilder.TrimSolidAction) - Method in interface nxopen.tooling.TrimSolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setActionUseTessellationFile(boolean) - Method in interface nxopen.motion.BodyContactLms
-
License requirements: mechanisms ("MECHANISMS")
.
- setActionWhenGouging(CutParametersActionWhenGougingTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setActivate(boolean) - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder
-
- setActivateBaseline(boolean) - Method in interface nxopen.annotations.OrdinateBaselineBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setActivateFeatureGroupWithRollback(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setActivatePartModule(boolean) - Method in interface nxopen.features.PartModuleBuilder
-
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- setActivatePerpendicular(boolean) - Method in interface nxopen.annotations.OrdinateBaselineBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setActivateVolFilterToggle(boolean) - Method in interface nxopen.tooldesigner.SelectWeldsBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setActive(LaminateDynamicSim) - Method in interface nxopen.cae.LaminateDynamicSimCollection
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setActive(boolean) - Method in interface nxopen.cae.responsesimulation.NormalMode
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setActive(boolean) - Method in interface nxopen.cam.CycleCoolant
-
License requirements: cam_base ("CAM BASE")
.
- setActive(boolean) - Method in interface nxopen.cam.CycleDwell
-
License requirements: cam_base ("CAM BASE")
.
- setActive(boolean) - Method in interface nxopen.cam.CycleNodragClearance
-
License requirements: cam_base ("CAM BASE")
.
- setActive(boolean) - Method in interface nxopen.cam.CycleSpindle
-
License requirements: cam_base ("CAM BASE")
.
- setActive(boolean) - Method in interface nxopen.cam.CycleStepRetract
-
License requirements: cam_base ("CAM BASE")
.
- setActive(boolean) - Method in interface nxopen.cam.CycleTipRelease
-
License requirements: cam_base ("CAM BASE")
.
- setActive(ExpressionGroup) - Method in interface nxopen.ExpressionGroupCollection
-
Sets the active expression group
License requirements: None.
- setActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setActive(boolean) - Method in interface nxopen.motion.NormalModeProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setActive(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setActive(boolean) - Method in interface nxopen.report.CommandBuilder
-
License requirements: None.
- setActive(boolean) - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
License requirements: ugweld ("UG WELD")
.
- setActiveArrangement(Arrangement) - Method in interface nxopen.assemblies.ComponentAssembly
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setActiveArrangement(Tag) - Method in interface nxopen.uf.UFAssem
-
- setActiveClassifier(Classifier) - Method in interface nxopen.visualreporting.Rule
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setActiveClassifierOfRule(Rule, Classifier) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Sets the active
Classifier
in this
Rule
for a multiple properties report.
- setActiveConditionSequence(SimConditionSequence) - Method in interface nxopen.cae.SimConditionSeqMgr
-
License requirements: None.
- setActiveDisplay(BasePart, DisplayPartOption, PartDisplayPartWorkPartOption) - Method in interface nxopen.PartCollection
-
Sets the active display part.
- setActiveDynamicSection(DynamicSection) - Method in interface nxopen.ModelingView
-
License requirements: None.
- setActiveEditSegmentType(EditPointBuilder.Editsegmenttype) - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setActiveEngineeringChangeNotice(Part, String, String) - Method in interface nxopen.pdm.PdmSession
-
Sets active ECN for the session.
- setActiveEvent(RSEvent) - Method in interface nxopen.cae.responsesimulation.Solution
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setActiveEventSolveOptions(DurabilitySolverBuilder.ActiveEventSolveOptionsEnum) - Method in interface nxopen.cae.DurabilitySolverBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setActiveExciterConfig(int) - Method in interface nxopen.cae.PreTestExciterConfigCollection
-
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveFillComponent(Component) - Method in interface nxopen.tooling.MoldFillingBuilder
-
Sets the specified component as the active component.
- setActiveFront(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setActivegroupOption(boolean) - Method in interface nxopen.GroupBuilder
-
License requirements: None.
- setActiveHorizontalMargin(OrdinateMargin) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setActiveLayer(int, int) - Method in interface nxopen.routing.PlacePartBuilder
-
Set the layer for the loaded part.
- setActiveLegendTablePosition(LegendTablePositionType) - Method in interface nxopen.cae.xyplot.LegendTableGroupStyle
-
License requirements: None.
- setActiveMarginsolution(MarginSolution) - Method in interface nxopen.cae.aerostructures.MarginSolutionCollection
-
Activates the marginsolution.
- setActiveMetasolution(DurabilityMetaSolution) - Method in interface nxopen.cae.DurabilityMetaSolutionCollection
-
Activates the metasolution.
- setActiveModePair(int, int, boolean) - Method in interface nxopen.cae.CorrelSolution
-
Sets a specific mode pair as active or not
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveMotionType(EditPointBuilder.Motiontype) - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setActiveNode(int, NavigatorNode) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Set selected node as active node.
- setActivePage(int) - Method in interface nxopen.blockstyler.TabControl
-
License requirements: None.
- setActiveParameterGroupName(String) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setActivePlane(DynamicSectionTypes.Axis, DynamicSectionTypes.ActivePlane) - Method in interface nxopen.display.DynamicSectionBuilder
-
- setActivePoints(Point[], Point) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
Sets key points that are selected or will be moved
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setActivePoints(Point[], Point) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Sets key points that are selected or will be moved
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setActivePortVariableGroupName(String) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setActivePostReport(LaminatePostReport) - Method in interface nxopen.cae.LaminatePostReportCollection
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setActivePretest(PreTestSolution) - Method in interface nxopen.cae.PreTestSolutionCollection
-
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveRear(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setActiveRefMode(int, boolean) - Method in interface nxopen.cae.CorrelSolution
-
Sets a specific reference mode as active or not
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveRefSet(String) - Method in interface nxopen.routing.PlacePartBuilder
-
Set the reference set to use for the loaded part.
- setActiveRowIndex(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setActiveRun(Run) - Method in interface nxopen.plas.PlasManager
-
License requirements: None.
- setActiveSensor(int, boolean) - Method in interface nxopen.cae.CorrelSolution
-
Sets a specific sensor as active or not
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveSensorConfig(int) - Method in interface nxopen.cae.PreTestSensorConfigCollection
-
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveSensorDof(int, int, boolean) - Method in interface nxopen.cae.CorrelSolution
-
Sets a specific sensor DOF as active or not
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveSensorDofOrientation(int, int, boolean) - Method in interface nxopen.cae.CorrelSolution
-
Sets a specific sensor DOF orientation
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveSheet(Sheet) - Method in interface nxopen.diagramming.DiagrammingManager
-
- setActiveSheet(Sheet) - Method in interface nxopen.diagramming.SheetManager
-
License requirements: None.
- setActiveSide(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setActiveSketchViewColor(NXColor) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setActiveSolution(CorrelSolution) - Method in interface nxopen.cae.CorrelSolutionCollection
-
License requirements: None.
- setActiveSolution(ModelUpdateSolution) - Method in interface nxopen.cae.ModelUpdateSolutionCollection
-
License requirements: None.
- setActiveSolution(Solution) - Method in interface nxopen.cae.responsesimulation.SolutionCollection
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setActiveSolution(SimSolution) - Method in interface nxopen.cae.SimSimulation
-
Sets the active solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setActiveSolution(MotionSolution) - Method in interface nxopen.motion.MotionSolutionCollection
-
- setActiveSolution(Tag) - Method in interface nxopen.uf.UFMotion
-
- setActiveSolutionAndStepNx(Tag, Tag) - Method in interface nxopen.uf.UFSf
-
- setActiveStatus(boolean) - Method in interface nxopen.cae.LaminateGlobalLayup
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setActiveStatus(boolean) - Method in interface nxopen.cae.LaminateModeProperty
-
Sets the active status
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setActiveStatus(boolean) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setActiveStep(SimSolutionStep) - Method in interface nxopen.cae.SimSolution
-
Sets the active step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setActiveTabPage(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setActiveTemplate(String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
- setActiveTransformType(TransformBlockBuilder.Transformtype) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setActiveVerticalMargin(OrdinateMargin) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setActiveView(TaggedObject) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
Sets the active view for the shape operation.
- setActiveView(ActiveView) - Method in interface nxopen.motion.ArticulationControl
-
License requirements: mechanisms ("MECHANISMS")
.
- setActiveView(ActiveView) - Method in interface nxopen.motion.SpreadsheetRunControl
-
License requirements: mechanisms ("MECHANISMS")
.
- setActiveViewColor(NXColor) - Method in interface nxopen.preferences.PartDrafting
-
Sets the drafting active view color.
- setActiveWorkMode(int, boolean) - Method in interface nxopen.cae.CorrelSolution
-
Sets a specific work mode as active or not
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveWorkMode(int, boolean) - Method in interface nxopen.cae.PreTestSolution
-
Sets a specific work mode as active or not
License requirements: nx_correl_base ("FE Correlation")
.
- setActiveZone(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setActivityStatus(boolean) - Method in interface nxopen.cae.DurabilityEvent
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setActivityStatus(boolean) - Method in interface nxopen.cae.ModelUpdateDesignVariable
-
Sets activity status
License requirements: nx_correl_update ("FE Model Update")
.
- setActualValue(int) - Method in interface nxopen.motion.ConfigurationIntegerParameter
-
License requirements: mechanisms ("MECHANISMS")
.
- setActualValue(String) - Method in interface nxopen.motion.ConfigurationTextParameter
-
License requirements: mechanisms ("MECHANISMS")
.
- setActuatorFunction(Function) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setActuatorType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setAcutelyAngledWallsChecker(boolean) - Method in interface nxopen.features.AnalyzePocketBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAdamsSolverProperty(AdamsSolverProperty) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setAdapter(SignalAdapter) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAdapterIdentify(SignalAdapter) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAdapterObject(SignalAdapter) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAdapterTag(SignalAdapter) - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setAdaptiveScaleLimits(boolean) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setAddAllForcesAndMoments(boolean) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setAddAllSubordinates(boolean) - Method in interface nxopen.assemblies.SubsetBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setAddBeamFillets(boolean) - Method in interface nxopen.cae.ResultMeasureResultAllOptions
-
Set the option to add beam fillets for calculation of beam stresses only
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setAddButtonSensitive(boolean) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setAddButtonSensitive(boolean) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setAddCadFeatureAttributes(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
License requirements: None.
- setAddCAENonMastersToImport(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setAddCamDiskToMasterJointOption(CamBuilder.AddCamDiskToMasterOption) - Method in interface nxopen.mechatronics.CamBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAddCenterPasses(boolean) - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
License requirements: None.
- setAddCenterPasses(boolean) - Method in interface nxopen.cam.FlowCutSteepContainment
-
License requirements: None.
- setAddComponents(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setAddComponentsAutomatically(boolean, boolean) - Method in interface nxopen.ReferenceSet
-
Sets the add components automatically toggle value.
- setAddComponentsExclusively(boolean) - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
License requirements: None.
- setAddCosmeticEnd(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setAddCover(boolean) - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setAddDfaMixins(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setAddedBottom(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setAddedGeometry(Section) - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setAddedTop(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setAddEndPointsSwitch(int) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Sets the add end points switch
License requirements: ug_die_design ("Die Design")
.
- setAddExtensionToggle(boolean) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setAddfillets(boolean) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setAddFillets(boolean) - Method in interface nxopen.features.SmoothCurveStringBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setAddFolderToSearch(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAddForeshorteningSymbol(boolean) - Method in interface nxopen.drawings.ViewBreakBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAddHandler(ListBox.AddCallback) - Method in interface nxopen.blockstyler.ListBox
-
Sets the Add handler.
- setAddHandler(SetList.AddCallback) - Method in interface nxopen.blockstyler.SetList
-
Sets the AddNewSet handler.
- setAddIndex(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setAddInsulationOnFittings(boolean) - Method in interface nxopen.mechanicalrouting.InsulationBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setAdditionalCommands(String) - Method in interface nxopen.cam.TurningOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAdditionalFrequencies(double[]) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
Sets the additional frequencies values
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setAdditionalFrequenciesBreakPoints(boolean) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setAdditionalFrequenciesUnits(LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setAdditionalPasses(int) - Method in interface nxopen.cam.PlanarOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAdditionalPasses(int) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAdditionalPlanesPerFrame(int) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAdditionalProfiling(boolean) - Method in interface nxopen.cam.TurnCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setAdditionalReferenceFromFeature(Feature) - Method in interface nxopen.weld.LocatorReferenceBuilder
-
Set additional references.
- setAdditionalSmoothingOption(SmoothOptResultsBuilder.AdditionalSmoothingType) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAddLeftRailingToggle(boolean) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setAddMaster(boolean) - Method in interface nxopen.pdm.PartOperationCreateBuilder
-
Sets the Add Master Flag
Use this only in case creating a new Altrep.
- setAddMasterComponentPart(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAddMasterFlag(boolean) - Method in interface nxopen.FileNew
-
- setAddNeatTrim(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAddNewSetLabel(String) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setAddonOperation(ScrapDesignBuilder.AddonType) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAddPartToActiveRunFlag(boolean) - Method in interface nxopen.routing.PlacePartBuilder
-
Set a flag which tells the builder whether the part being placed will be added in active run or not.
- setAddPointsOnSubdivideFlag(boolean) - Method in interface nxopen.routing.SplinePathBuilder
-
Sets whether or not additional points will be added to a spline which is created as the
result of a subdivide.
- setAddRaft(boolean) - Method in interface nxopen.Print3dBuilder
-
License requirements: None.
- setAddRailingToggle(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setAddRightRailingToggle(boolean) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setAddRiserToggle(boolean) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setAddSheetName(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAddSheetNumber(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAddStringerToggle(boolean) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setAddSupport(boolean) - Method in interface nxopen.Print3dBuilder
-
License requirements: None.
- setAddTangentFaces(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAddToMaterialLibraryToggle(boolean) - Method in interface nxopen.PhysicalMaterialBuilder
-
License requirements: None.
- setAddUnconnectedEquipmentToActiveRunOption(boolean) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Sets the option that determines whether a part positioned as Equipment should be added to the active Run
License requirements: routing_base ("Routing Basic")
.
- setAddWatermark(boolean) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setADefinePoint(int, double, double, double, int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
- setAdjacencyTol(double) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setAdjacencyToleranceData(double) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAdjacentBlades(CutParametersAdjacentBladesTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setAdjacentBlends(boolean) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAdjacentBlends(boolean) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Sets the status of adjacent blends.
- setAdjacentBlends(boolean) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Sets the status of adjacent blends.
- setAdjacentBlendsColor(int) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Sets the color of adjacent blends.
- setAdjacentBlendsColor(int) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Sets the color of adjacent blends.
- setAdjacentBlendsEndGaps(boolean) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Sets the status of adjacent blends end gaps.
- setAdjacentBlendsEndGaps(boolean) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Sets the status of adjacent blends end gaps.
- setAdjacentBlendsEndGapsData(double) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Sets the value of adjacent blends end gaps.
- setAdjacentBlendsEndGapsData(double) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Sets the value of adjacent blends end gaps.
- setAdjacentBlendsFont(Font) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Sets the font of adjacent blends.
- setAdjacentBlendsFont(Font) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Sets the font of adjacent blends.
- setAdjacentBlendsWidth(Width) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Sets the width of adjacent blends.
- setAdjacentBlendsWidth(Width) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Sets the width of adjacent blends.
- setAdjacentFacet(Tag, int, int, int) - Method in interface nxopen.uf.UFFacet
-
- setAdjacentSurface(Face) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Sets the edge point inspection feature adjacent surface tag
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAdjreg(int) - Method in interface nxopen.cam.RotateToolMoveBuilder
-
License requirements: None.
- setAdjregToggle(boolean) - Method in interface nxopen.cam.RotateToolMoveBuilder
-
License requirements: None.
- setAdjustBoundaryChannel(boolean) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setAdjustBoundaryChannel(boolean) - Method in interface nxopen.tooling.CoolingExtendBuilder
-
License requirements: None.
- setAdjustedNodeLocationColor(NXColor) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAdjustedPlateLength(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setAdjustedThickness(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the adjusted thickness of the die rib.
- setAdjustedThickness(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the adjusted thickness of die ribs.
- setAdjustFeedRateOption(CornerControlBuilder.AdjustFeedRateOptions) - Method in interface nxopen.cam.CornerControlBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAdjustment(ProbeControlParametersBuilder.AdjustmentTypes) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setAdjustmentMode(TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAdjustmentValue(double) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setAdjustMethod(ChannelAdjustBuilder.AdjustType) - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
License requirements: None.
- setAdjustRegister(int, int) - Method in interface nxopen.cam.ToolTrackingPointBuilder
-
Set the Adjust register
License requirements: None.
- setAdjustRegister(int) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setAdjustRegisterToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAdjustRegisterToggle(int, boolean) - Method in interface nxopen.cam.ToolTrackingPointBuilder
-
Set the Adjust register Toggle Status
License requirements: None.
- setAdjustRegisterType(MachinePocketGroupBuilder.RegisterType) - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
- setAdjustRegisterType(KinematicComponentBuilder.RegisterTypes) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setAdjustVector(Direction) - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
License requirements: None.
- setAdministrationBypass(boolean) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setAdministrationLogging(boolean) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setAdoptAssemblyJointStatus(MotionEnvironment.AdoptAssemblyJointStatus) - Method in interface nxopen.motion.MotionEnvironment
-
Sets the on-off status of adopt assembly joint
License requirements: mechanisms ("MECHANISMS")
.
- setAdoptedDesignBody(Body) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAdoptedMfgBody(Body) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAdultHic1000OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAdultHic1000OutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAdultHic1000OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAdultHic1000OutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAdultHic1700OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAdultHic1700OutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAdultHic1700OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAdultHic1700OutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAdvanceAngle(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAdvancedConstraintInformation(int, TaggedObject[], TaggedObject[], double, double, double, double, double, TaggedObject[], double[], double[], double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Set advanced constraint information.
- setAdvancedFit(boolean) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setAdvancedMaterial(JtCreator.AdvancedMaterials) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setAdvancedMethod(StudioXformBuilder.AdvancedMethodType) - Method in interface nxopen.features.StudioXformBuilder
-
- setAdvancedMethod(StudioXformBuilderEx.AdvancedMethodType) - Method in interface nxopen.features.StudioXformBuilderEx
-
- setAdvancedMethodOption(StudioXformBuilderEx.AdvancedMethodOptionType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setAdvancedScalingData(HumanData.AdvancedScalingType, double) - Method in interface nxopen.features.HumanBuilder
-
Set data for advanced scaling
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setAdvancedSolutionObject(AdvancedSolution) - Method in interface nxopen.motion.GraphObjectBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setAdvancedVisViewTolerance(PartVisualizationShade.AdvViewToleranceType) - Method in interface nxopen.preferences.PartVisualizationShade
-
Sets the tolerance for advanced visualization views.
- setAdvancedVisViewUpdateMode(PartVisualizationShade.ViewUpdateModeType) - Method in interface nxopen.preferences.PartVisualizationShade
-
Sets the update mode for advanced visualization views.
- setAdvCompression(double) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setAdvVisAlignFacets(boolean) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setAdvVisAngleTol(FacetSettingsBuilder.AdvVisToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder
-
Sets the angle tolerance for a given tolerance set for Advanced Visualization Views
License requirements: None.
- setAdvVisEdgeTol(FacetSettingsBuilder.AdvVisToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder
-
Sets the edge tolerance for a given tolerance set for Advanced Visualization Views
License requirements: None.
- setAdvVisFaceTol(FacetSettingsBuilder.AdvVisToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder
-
Sets the face tolerance for a given tolerance set for Advanced Visualization Views
License requirements: None.
- setAdvVisFacetRatio(double) - Method in interface nxopen.display.FacetSettingsBuilder
-
- setAdvVisFacetScale(FacetSettingsBuilder.FacetScale) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setAdvVisFacetToViewRatio(FacetSettingsBuilder.FacetToViewRatio) - Method in interface nxopen.display.FacetSettingsBuilder
-
- setAdvVisRefinementFactor(double) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setAdvVisTolerance(FacetSettingsBuilder.AdvVisToleranceSetting) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setAdvVisUpdate(FacetSettingsBuilder.FacetUpdate) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setAdvVisViewFacetTolerances(PartVisualizationShade.AdvViewToleranceType, double, double, double, double) - Method in interface nxopen.preferences.PartVisualizationShade
-
Sets the edge, face, angle and width tolerances to be used with the specified
tolerance set for Advanced Visualization views.
- setAdvVisWidthTol(FacetSettingsBuilder.AdvVisToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder
-
Sets the width tolerance for a given tolerance set for Advanced Visualization Views
License requirements: None.
- setAFormula(boolean) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAfter(String[]) - Method in interface nxopen.annotations.AppendedTextBuilder
-
Sets the appended text after the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setAfterText(String[]) - Method in interface nxopen.annotations.AppendedText
-
Sets the appended text after the annotation
License requirements: None.
- setAfterText(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setAfterTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setAftOffset(BeamSectionOffsetOptions.Offset) - Method in interface nxopen.cae.BeamSectionOffsetOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setAftPerpendicular(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPerpendicularLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPerpendicularLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPerpendicularLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPerpendicularLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPerpendicularTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPerpendicularTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPerpendicularTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPerpendicularTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPerpendicularTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAftPlane(Plane) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAfuAbscissaHeaderInfo(AfuAbscissaHeaderInfo) - Method in interface nxopen.cae.AfuData
-
Sets the abscissa header information data of the AFU Data Record
License requirements: None.
- setAfuFile(String) - Method in interface nxopen.motion.GraphBuilder
-
- setAfuHeaderId(AfuHeaderId) - Method in interface nxopen.cae.AfuData
-
Sets the AFU Header Id data of the AFU Data Record
License requirements: None.
- setAfuOrdinateHeaderInfo(AfuOrdinateHeaderInfo) - Method in interface nxopen.cae.AfuData
-
Sets the ordinate header information data of the AFU Data Record
License requirements: None.
- setAfuRecordZValue(DataManager.AfuRecordZValue) - Method in interface nxopen.cae.xyplot.Preference
-
License requirements: None.
- setAfuZHeaderInfo(AfuZHeaderInfo) - Method in interface nxopen.cae.AfuData
-
Sets the Z axis header information data of the AFU Data Record
License requirements: None.
- setAhpCoordinates(String, String, String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the AHP point by coordinates, L8, W8, H8
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setAhpPoint(Point) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the AHP point by an existing point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setAirTrapOption(boolean) - Method in interface nxopen.tooling.FlowDisplayBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setAlgorithmChoice(PreTestSensorConfigBuilder.AlgorithmChoiceType) - Method in interface nxopen.cae.PreTestSensorConfigBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setAlgorithmType(OptimizationBuilder.OptimizationAlgorithmType) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setAlgorithmVersion(CopyObjectsBuilder.VersionID) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setAlgorithmVersion(CopyPasteNewBuilder.VersionID) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAlias(String) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setAlias(String) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAlign(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAlign(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAlign(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAlignAdvVisViewFacetsAlongEdges(boolean) - Method in interface nxopen.preferences.PartVisualizationShade
-
Sets the state of whether facets should be aligned along common edges for Advanced Visualization Views
License requirements: None.
- setAlignAt(OrientationAngleMethodsBuilder.AlignAtTypes) - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAlignAxis(Axis) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Sets the alignment axis
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAlignBreakPoints(boolean) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
License requirements: None.
- setAlignedCenterlines(boolean) - Method in interface nxopen.annotations.Centerline3dBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAlignMachineAxes(boolean) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAlignMachineAxes(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAlignment(TextAlignment) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setAlignment(SectionAnalysisExBuilder.AlignmentType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setAlignmentHint(Constraint.Alignment) - Method in interface nxopen.positioning.Constraint
-
Set a hint as to which alignment should be used by the
solver for this constraint.
- setAlignmentMethod(ContactMeshBuilder.AlignmentType) - Method in interface nxopen.cae.ContactMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAlignmentMethod(ViewPlacementBuilder.Method) - Method in interface nxopen.drawings.ViewPlacementBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAlignmentMethod(AlignStockBuilder.StockAlignmentMethod) - Method in interface nxopen.routing.AlignStockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setAlignmentOption(ViewPlacementBuilder.Option) - Method in interface nxopen.drawings.ViewPlacementBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAlignmentOption(AestheticFaceBlendBuilder.AlignmentType) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setAlignmentPosition(AlignmentPosition) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the align position
License requirements: None.
- setAlignmentPosition(TableSectionStyleBuilder.AlignmentPositionType) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAlignmentPosition(AlignmentPosition) - Method in interface nxopen.annotations.TitleBlockPreferences
-
License requirements: drafting ("DRAFTING")
.
- setAlignmentType(InspectionAlignmentAssistantBuilder.AlignType) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAlignmentType(BracketBuilder.AlignmentTypes) - Method in interface nxopen.features.shipdesign.BracketBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAlignmentType(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setAlignmentVector(Direction) - Method in interface nxopen.drawings.ViewPlacementBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAlignOpName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAlignPoints(OnPathDimensionBuilder[]) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Set the Alignment Points when sections have been set up.
- setAlignPosition(AlignmentPosition) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAlignRefType0(AeroFlangeBuilder.AlignReferenceType) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: None.
- setAlignRefType0(AeroRibBuilder.AlignReferenceType) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: None.
- setAlignRefType1(AeroFlangeBuilder.AlignReferenceType) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: None.
- setAlignRefType1(AeroRibBuilder.AlignReferenceType) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: None.
- setAlignShadedViewFacetsAlongEdges(boolean) - Method in interface nxopen.preferences.PartVisualizationShade
-
Sets the state of whether facets should be aligned along common edges for Shaded Views
License requirements: None.
- setAlignShape(boolean) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setAlignStartOrientation(boolean) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the align start orientation switch of the draw die punch casting, if true use the alignment point to define the start of the punch profile,
if false use the default algorithm to define the start of the punch profile.
- setAlignSymbolWithBaseline(boolean) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the flag indicating whether to align the user defined symbol with the
base line
License requirements: None.
- setAlignSymbolWithBaseline(boolean) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAlignTargetEdgeNodes(boolean) - Method in interface nxopen.cae.ContactMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAlignType(InspectionAlignmentBuilder.AlignTypes) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAlignType(AlignmentMethodBuilder.Type) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Sets the alignment type
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAlignVector(boolean) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAlignVector(Direction) - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAlignVector(Direction) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Sets the alignment vector
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAlignVector(Axis) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAlignVector(Vector3d) - Method in interface nxopen.routing.IAxisPort
-
Sets the align vector of Port
License requirements: routing_base ("Routing Basic")
.
- setAlignVector(QuickDatumCsysBuilder.AlignVectors) - Method in interface nxopen.tooling.QuickDatumCsysBuilder
-
Sets the align vector type.
- setALL() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
Set all objects as chosen
License requirements: None.
- setAllAroundSymbol(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
License requirements: None.
- setAllAroundSymbolSize(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAllAspects(boolean) - Method in interface nxopen.ame.EditClauseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAllAttributesChanged() - Method in interface nxopen.weld.CharacteristicsBuilder
-
Sets all attributes to be changed.
- setAllAttributesChanged(boolean) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Sets all attributes changed value to the status value.
- setAllButWork(int) - Method in interface nxopen.uf.UFLayer
-
- setAllChecks() - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Set all types of checks to examine
License requirements: None.
- setAllCommonColor() - Method in interface nxopen.cam.PathDisplayColors
-
Set the color to all common
License requirements: cam_base ("CAM BASE")
.
- setAllConstraints() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Set all of the individual constraints (turn toggle to on for each one)
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAllData(Point3d, Point3d, Vector3d, Vector3d, double, double, double, double, boolean, boolean, HealMethod, SplineOptions) - Method in interface nxopen.routing.HealPath
-
Set all the data associated with the heal path creation.
- setAllElems(boolean) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setAllGroupsVisible() - Method in interface nxopen.ExpressionGroupCollection
-
Make all expression groups visible
License requirements: None.
- setAllIndividualExtensions(double[]) - Method in interface nxopen.annotations.CenterlineBuilder
-
Sets all individual extensions
License requirements: drafting ("DRAFTING")
.
- setAllInstances(boolean) - Method in interface nxopen.features.ChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAllInstancesOption(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAllLevelsOfDetail(boolean) - Method in interface nxopen.VRMLImporter
-
Sets the All Levels of Detail flag.
- setAllMeshContext(boolean) - Method in interface nxopen.cae.ThicknessBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAllNodes(boolean) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setAllOptionsToAnalyze() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
- setAllOptionsToNone() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
- setAllOptionsToRepair() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Sets all cleanup options to
CleanupFacetBodyBuilder.CleanupOptions.REPAIR
, which means to identify as well as repair the defects for the input bodies
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX10.0.0
- setAllowableThickening(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAllowableThinning(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAllowance(double) - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
License requirements: None.
- setAllowanceValue(double) - Method in interface nxopen.features.shipdesign.MaterialAllowanceBuilder
-
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setAllowArcs(boolean) - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Sets the flag that allows traversal of arcs when finding connected
curves.
- setAllowBroken(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setAllowConvergentObject(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setAllowCutElbow(boolean) - Method in interface nxopen.routing.LinearPathSettings
-
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
- setAllowDeleteMembers(boolean) - Method in interface nxopen.features.FeatureGroup
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAllowDeleteMembers(boolean) - Method in interface nxopen.features.PartModule
-
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- setAllowDeselectForSingleSelect(boolean) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setAllowDuplicates(boolean) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAllowedCorners(RoutingPath.AllowedCornerType[]) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setAllowedCurves(RoutingPath.CurveType[]) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setAllowedEntityTypes(Section.AllowTypes) - Method in interface nxopen.Section
-
Set the Allowed Entity Types.
- setAllowEditingOfDimensionOfInternalSketch(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setAllowFeetInchFractionForDimensionGreaterThan(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setAllowHeadAndEyeRotation(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAllowInchFractionToNearest(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setAllowInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setAllowInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setAllowInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setAllowInsideGeometry(boolean) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setAllowInternationalTextInput(boolean) - Method in interface nxopen.blockstyler.StringBlock
-
- setAllowJumpers(boolean) - Method in interface nxopen.diagramming.SheetBuilder
-
License requirements: None.
- setAllowLines(boolean) - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Sets the flag that allows traversal of lines when finding connected
curves.
- setAllowManualRows(boolean) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setAllowMultipleConnections(boolean) - Method in interface nxopen.routing.Port
-
Sets the Allow Multiple Connections property for a
Port
.
- setAllowMultipleDisplayedParts(boolean) - Method in interface nxopen.PartCollection
-
Sets the option indicating if more than one displayed part is allowed in this session.
- setAllowMultipleTargetPartitions(boolean) - Method in interface nxopen.assemblies.Subset
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setAllowMultipleValues(boolean) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setAllowNewCables(boolean) - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
License requirements: routing_cabling ("Routing Cabling")
.
- setAllowNonOrthogonalConnections(boolean) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setAllowOccs(boolean) - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Sets the flag that allows traversal of curve occurrences when finding connected
curves.
- setAllowOverFill(boolean) - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
License requirements: routing_cabling ("Routing Cabling")
.
- setAllowOversizeTool(boolean) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAllowOwnedObjectSelectionOption(UserDefinedClass.AllowOwnedObjectSelection) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Sets the allow owned object selection flag.
- setAllowPatch(boolean) - Method in interface nxopen.tooling.EdgePatchBuilder
-
License requirements: None.
- setAllowPostureValueOutOfRange(boolean) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAllowQueryClassFromName(UserDefinedClass.AllowQueryClass) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Sets the allow query class from name flag.
- setAllowRefCrvs(boolean) - Method in interface nxopen.Section
-
Sets to the section whether to allow reference curves or not.
- setAllowRefCurves(boolean) - Method in interface nxopen.ScCollector
-
Sets whether to allow reference curves or not in the ScCollector
License requirements: None.
- setAllowRotation(boolean) - Method in interface nxopen.linedesigner.PickRectanglePointsBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setAllowSelfIntersection(boolean) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAllowShortcuts(boolean) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setAllowSlip(boolean) - Method in interface nxopen.mechatronics.CouplingBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAllowSplines(boolean) - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Sets the flag that allows traversal of splines when finding connected
curves.
- setAllowStopAtIntersectionFollowFillet(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setAllowStopAtIntersectionFollowFillet(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setAllowSubstitution(boolean) - Method in interface nxopen.LoadOptions
-
Sets the allow substition option.
- setAllowTargetEdgesAsToolObjects(boolean) - Method in interface nxopen.features.TrimSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAllowTemporaryPartsToReplace(boolean) - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setAllowTransitionCurveOnBlends(boolean) - Method in interface nxopen.features.BlendCornerBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setAllowUndercut(boolean) - Method in interface nxopen.cam.TurnCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setAllowUndercutting(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setAllPlanesGeometry(Point3d[], Matrix3x3[]) - Method in interface nxopen.display.DynamicSectionBuilder
-
Sets geometry for all planes of the section.
- setAllRegionUdosSelected(int) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Set the flag to indicate if the node for all the region UDOs in the tree list is selected
License requirements: None.
- setAllReverseDirectionFlags(boolean[]) - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- setAllroundSymbol(boolean) - Method in interface nxopen.annotations.LineWeldData
-
Sets the flag indicating whether the allround symbol is displayed
License requirements: None.
- setAllSameColor(boolean) - Method in interface nxopen.geometricutilities.ColorCodedRegionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setAllSelected() - Method in interface nxopen.uistyler.MultiSelectList
-
Specifies all list entry to be selected.
- setAllSynchronizeFlags(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions
-
Sets all the synchronize options to the given boolean value
License requirements: None.
- setAlongDirection(SnipFacetBodyBuilder.DirectionType) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setAlongDirection(DieBaseBuilder.AlongDirectionOpt) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setAlongFaceNormal(boolean) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setAlongOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAlternate(PlaneTypes.AlternateType) - Method in interface nxopen.IPlane
-
Sets the alternate type
License requirements: None.
- setAlternateDescription(String) - Method in interface nxopen.pdm.AlternateIdManager
-
Sets the value of the alternate description.
- setAlternateIdAsDefaultIndentifier(boolean) - Method in interface nxopen.pdm.AlternateIdManager
-
Sets whether the alternate ID information should be the default indentifier.
- setAlternateIdInformation(String, String, String, String, String, String, boolean) - Method in interface nxopen.pdm.AlternateIdManager
-
Sets alternate ID information on this manager class. null can be specified
for parameters which are set via other set or assign methods on this builder.
- setAlternateItemId(String) - Method in interface nxopen.pdm.AlternateIdManager
-
Sets the value of the alternate item ID.
- setAlternateMethod(int) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setAlternateMethod(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setAlternateName(String) - Method in interface nxopen.pdm.AlternateIdManager
-
Sets the value of the alternate name.
- setAlternatename(String) - Method in interface nxopen.PhysicalMaterial
-
Sets the material alternate name
License requirements: None.
- setAlternateResult(boolean) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAlternateRevId(String) - Method in interface nxopen.pdm.AlternateIdManager
-
Sets the value of the alternate rev ID.
- setAlternateSolution(DatumConstraint.Solution) - Method in interface nxopen.DatumConstraint
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAlternateSolution(boolean) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setAlternateSolution(int) - Method in interface nxopen.features.StyledSweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setAlternateSolutions(int) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: None.
- setAlternateSolutionType(DatumAxisBuilder.AlternateSolution) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setAlternativeAngle(boolean) - Method in interface nxopen.features.AngularDimBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAlterResult(boolean) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setAltRepDisplayStyle(FEModelOccAttribute.AltRepDisplayStyle) - Method in interface nxopen.cae.FEModelOccAttribute
-
Set the alternate representation display style
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAltRepType(String, FEModelOccAttribute.AltRepLengthUnitType, FEModelOccAttribute.AltRepMassUnitType, AlternateFemRepresentationSource, String) - Method in interface nxopen.cae.ModifiableFEModelOccAttribute
-
Set the alternate representation type by its neutral name in the current analysis type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAlwaysEvaluated(boolean) - Method in interface nxopen.motion.SignalChartListItem
-
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setAlwaysUpdateDialogs(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setAlwaysVertical(boolean) - Method in interface nxopen.annotations.DatumData
-
Sets the flag indicating whether the datum is always vertical (without the stub)
License requirements: None.
- setAmAddPasses(int) - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
License requirements: None.
- setAmAddPasses(int) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: None.
- setAmAutoPatCenter(AreaMillingNonSteepContainment.AutoPatCenterTypes) - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
License requirements: None.
- setAmAutoPatCenter(DmAmBuilder.AutoPatCenterTypes) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: None.
- setAmbientOcclusion(boolean) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setAmbientTempFunction(MotionFunction) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setAmbientTempTypeSelection(TirePropertyCdBuilder.AmbientTempType) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setAmCutPattern(DmAmBuilder.AmCutPatternTypes) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: None.
- setAmCutRegionStartEnum(DmAmBuilder.AmCustomStartTypes) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: None.
- setAmCutTraversal(DmAmBuilder.AmCutTraversalTypes) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: None.
- setAmplitudeCorrectionFactor(double) - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes
-
License requirements: None.
- setAmplitudeCorrectionFactor(double) - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes
-
License requirements: None.
- setAmPocketDir(AreaMillingNonSteepContainment.AmPocketDirTypes) - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
License requirements: None.
- setAmPocketDir(AreaMillingNonSteepContainment.AmPocketDirTypes) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: None.
- setAmSteepOption(DmAmBuilder.SteepOptTypes) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: None.
- setAnalyMode(ValidCheckBuilder.AnalysisMode) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAnalysisDisplay(Tag, UFCurve.AnalysisDisplay) - Method in interface nxopen.uf.UFCurve
-
- setAnalysisMode(Tag, int) - Method in interface nxopen.uf.UFClear
-
- setAnalysisPoint(Point) - Method in interface nxopen.geometricanalysis.DupinBuilder
-
License requirements: None.
- setAnalysisRecord(Curve, CurveAnalysisRecord) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay
-
- setAnalysisSolution(SimSolution) - Method in interface nxopen.cae.optimization.DAOSolutionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setAnalysisSpacing(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAnalysisType(DurSpecialistAnalysisType) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setAnalysisType(DurSpecialistAnalysisType) - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setAnalysisType(RSEvent.AnalysisType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setAnalysisType(NCAssistantBuilder.AnalysisTypes) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAnalysisType(CombOptionsBuilder.AnalysisTypes) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setAnalysisType(MotionEnvironment.Analysis) - Method in interface nxopen.motion.MotionEnvironment
-
Sets the the analysis type
License requirements: mechanisms ("MECHANISMS")
.
- setAnalysisType(MotionSolutionBuilder.AnalysisTypes) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setAnalysisTypeInherited(boolean) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setAnalyzeMachiningTime(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setAnchor(Point) - Method in interface nxopen.annotations.BaseCustomSymbol
-
Sets the master custom symbol anchor point.
- setAnchor(Point) - Method in interface nxopen.annotations.MasterCustomSymbolData
-
- setAnchor(OriginBuilder.AlignmentPosition) - Method in interface nxopen.annotations.OriginBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setAnchor(RegionBuilder.AlignmentPosition) - Method in interface nxopen.annotations.RegionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setAnchor(Anchor) - Method in interface nxopen.routing.Stock
-
- setAnchorageLocation(SeatBeltAnchorageBuilder.AnchorageLocationTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAnchorAttachment(ShapeFrameBuilder.AnchorAttachmentType) - Method in interface nxopen.geometricutilities.ShapeFrameBuilder
-
License requirements: None.
- setAnchorCenter(boolean) - Method in interface nxopen.display.NonProportionalZoom
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setAnchorColor(NXColor) - Method in interface nxopen.cae.xyplot.LeaderStyle
-
License requirements: None.
- setAnchorLocation(AnchorLocation) - Method in interface nxopen.diagramming.tables.TableSettingsBuilder
-
License requirements: None.
- setAnchorLocation(FrameOnPathBuilder.AnchorLocationType) - Method in interface nxopen.geometricutilities.FrameOnPathBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAnchorLocation(RectangularFrameBuilder.AnchorLocationType) - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAnchorObject(DisplayableObject) - Method in interface nxopen.markup.MarkupObject
-
License requirements: None.
- setAnchorOrigin(Point3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setAnchorPoint(Point) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAnchorPoint(Point2d) - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
License requirements: None.
- setAnchorPoint(Point) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setAnchorPoint(int) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAnchorPoint(int) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setAnchorPoint(int) - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAnchorPoint(Point) - Method in interface nxopen.layout2d.DefineComponentAnchorPointBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setAnchorPoint(Point) - Method in interface nxopen.layout2d.DefineComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setAnchorPoint(Point) - Method in interface nxopen.mechatronics.BallJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAnchorPoint(Point) - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAnchorPoint(Point) - Method in interface nxopen.mechatronics.VirtualAxisBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAnchorPointLocation(Point2d) - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAnchorPointSecond(Point) - Method in interface nxopen.mechatronics.ChainJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAnchorPosition(CurveRangeBuilder.AnchorPositionType) - Method in interface nxopen.geometricutilities.CurveRangeBuilder
-
Sets the anchor position
License requirements: None.
- setAnchorPosition(SurfaceRangeBuilder.AnchorPositionType) - Method in interface nxopen.geometricutilities.SurfaceRangeBuilder
-
Sets the anchor position
License requirements: None.
- setAnchors(Anchor[]) - Method in interface nxopen.routing.StockData
-
- setAnchorType(DecalBuilder.Anchor) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setAnchorXAxis(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setAnchorYAxis(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setAngle(double) - Method in interface nxopen.annotations.Associativity
-
Sets the angle.
- setAngle(double) - Method in interface nxopen.annotations.AssociativityBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setAngle(double) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
- setAngle(double) - Method in interface nxopen.annotations.CustomSymbolData
-
- setAngle(double) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAngle(double) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAngle(double) - Method in interface nxopen.annotations.HatchBuilder
-
- setAngle(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAngle(double) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the angle
License requirements: None.
- setAngle(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAngle(double) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setAngle(double) - Method in interface nxopen.annotations.TargetPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAngle(double) - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
License requirements: cam_base ("CAM BASE")
.
- setAngle(double) - Method in interface nxopen.cam.FormEdgesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngle(double) - Method in interface nxopen.cam.LaserCutoutDefinition
-
License requirements: cam_base ("CAM BASE")
.
- setAngle(double) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
License requirements: None.
- setAngle(double) - Method in interface nxopen.cam.RotateToolMoveBuilder
-
License requirements: None.
- setAngle(double) - Method in interface nxopen.cam.ToolAxisTilt
-
License requirements: cam_base ("CAM BASE")
.
- setAngle(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngle(double) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngle(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the angle of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- setAngle(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Sets the angle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setAngle(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the angle of the die rib.
- setAngle(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the angle of die ribs.
- setAngle(double) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the value of angle of a member view.
- setAngle(String) - Method in interface nxopen.features.ChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngle(String) - Method in interface nxopen.features.EmbossSidewall
-
Set the sidewall defaults taper angle
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngle(String) - Method in interface nxopen.features.EmbossTaper
-
Taper angle expression formula string
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngle(String) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Set the angle expression.
- setAngle(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
- setAngle(double) - Method in interface nxopen.geometricanalysis.DupinBuilder
-
License requirements: None.
- setAngle(int, double) - Method in interface nxopen.geometricutilities.CircularFrameBuilder
-
Sets the i-th angle of the circular frame
License requirements: None.
- setAngle(String) - Method in interface nxopen.geometricutilities.DraftPointData
-
Sets the Angle value
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngle(double) - Method in interface nxopen.layout2d.InsertComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setAngle(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setAngle01(double) - Method in interface nxopen.tooling.PrebendBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAngle02(double) - Method in interface nxopen.tooling.PrebendBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAngle03(double) - Method in interface nxopen.tooling.PrebendBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAngle04(double) - Method in interface nxopen.tooling.PrebendBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAngle05(double) - Method in interface nxopen.tooling.PrebendBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAngle1(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setAngle1(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setAngle2(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setAngle2(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setAngle3(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setAngle3(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setAngle4(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setAngle5(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setAngle6(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setAngleA(double) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleA(double) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleA(double) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleA(double) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleA(double) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleAbout(Direction) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAngleAlignmentPoints(Point3d, Point3d) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Set angle alignment points.
- setAngleB(double) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleB(double) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleB(double) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleB(double) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleB(double) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleCalculation(BushingDefine.AngleCalculationOption) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setAngleCorrected(boolean) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setAngleDecimalPointCharacter(DecimalPointCharacter) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAngleDecimalPointFormat(DecimalPointCharacter) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the decimal point character to use for view angle display.
- setAngleDecimalPointFormat(DecimalPointCharacter) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the decimal point character to use for view angle display.
- setAngleDiePlateTwo(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAngledWallSolution(BlendPocketBuilder.AngledWallSolutions) - Method in interface nxopen.features.BlendPocketBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleEndPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleEndPoint(Point) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: None.
- setAngleEndPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngleEnum(CorrelFineTuneAlignmentBuilder.AngleVector) - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setAngleFormat(AngleFormat) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the format to use for view angle display.
- setAngleFormat(AngleFormat) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAngleFormat(AngleFormat) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the format to use for view angle display.
- setAngleIncrement(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAngleMethod(InspectionOperationTransformBuilder.Angle) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleMethod(OperationTransformBuilder.Angle) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngleMethod(OrientationAngleMethodsBuilder.MethodTypes) - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAngleMode(InspectionMethodBuilder.PolarAngleModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleMode(InspectionMethodBuilder.PolarAngleModeTypes) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleNoseIgnorableSize(double) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setAngleOption(ElementRevolveBuilder.AngleType) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAngleOption(TrimPoint.AngleOptions) - Method in interface nxopen.cam.TrimPoint
-
License requirements: cam_base ("CAM BASE")
.
- setAngleOption(PlateChamferBuilder.AngleMethod) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAngleOption(MultiDraft.AngleOption) - Method in interface nxopen.geometricutilities.MultiDraft
-
Sets the draft angle option
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAnglePivotPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAnglePivotPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAnglePrecision(int) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the precision to use for view angle display.
- setAnglePrecision(int) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAnglePrecision(int) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the precision to use for view angle display.
- setAngleReference(Plane) - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAngleResult(double) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setAngleRule(ShipDesignPreferencesBuilder.AngleRuleTypes) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAngleShowLeadingZeros(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAngleShowTrailingZeros(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAnglesNormal(OrientationRegionItemBuilder[]) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Will set all angle values of input regions so that web is normal to surface.
- setAngleStartPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleStartPoint(Point) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: None.
- setAngleStartPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngleStep(double) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setAngleString(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
- setAngleString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleThreshold(double) - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setAngleThreshold(double) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setAngleThreshold(double) - Method in interface nxopen.features.OptimizeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngleTol(double) - Method in interface nxopen.features.SphericalCornerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleTolerance(double) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngleTolerance(double) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setAngleTolerance(double) - Method in interface nxopen.cam.Topology
-
License requirements: cam_base ("CAM BASE")
.
- setAngleTolerance(double) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAngleTolerance(double) - Method in interface nxopen.die.CastReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.ClampingSlotBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.ClearanceBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.CompensateRoughDataBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.die.DieShoeBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAngleTolerance(double) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the angle tolerance of the draw die punch casting.
- setAngleTolerance(double) - Method in interface nxopen.die.FillAreaBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.FillBuilder
-
Sets the angle tolerance of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAngleTolerance(double) - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the angle tolerance of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAngleTolerance(double) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the angle tolerance of the form task.
- setAngleTolerance(double) - Method in interface nxopen.die.HandlingCoreBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.KeywayBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.MachineReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the angle tolerance.
- setAngleTolerance(double) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the angle tolerance of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAngleTolerance(double) - Method in interface nxopen.die.RotorBuilder
-
Sets the angle tolerance of the rotor casting.
- setAngleTolerance(double) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setAngleTolerance(double) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the angle tolerance of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- setAngleTolerance(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the angle tolerance of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAngleTolerance(double) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAngleTolerance(double) - Method in interface nxopen.facet.MergeFacetBodyBuilder
-
License requirements: None.
- setAngleTolerance(double) - Method in interface nxopen.features.BlendCornerBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setAngleTolerance(double) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.CurveOnSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.DraftBuilder
-
Sets the angle tolerance in [rad/deg]
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAngleTolerance(double) - Method in interface nxopen.features.HelixBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.JoinCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.LawExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.OffsetEmbossBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.RibbonBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.MarkingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setAngleTolerance(double) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
- setAngleTolerance(double) - Method in interface nxopen.features.WrapBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationChecking
-
License requirements: None.
- setAngleTolerance(double) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setAngleTolerance(double) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
-
License requirements: None.
- setAngleTolerance(double) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setAngleTolerance(double) - Method in interface nxopen.routing.ElbowSnapSettings
-
Sets the tolerance within which to search for elbow angles.
- setAngleTolerance(double) - Method in interface nxopen.Section
-
License requirements: gateway ("UG GATEWAY")
.
- setAngleTolerance(double) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngleTolerance(double) - Method in interface nxopen.SketchIntersectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setAngleTolerance(double) - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- setAngleTolerance(double) - Method in interface nxopen.uf.UFModeling
-
- setAngleToleranceData(double) - Method in interface nxopen.preferences.PartModeling
-
Sets the angle tolerance data.
- setAngleToleranceEdges(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setAngleToleranceValue(double) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setAngleType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setAngleType(BoundaryTurnMemberCorner.AngleValueType) - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
License requirements: cam_base ("CAM BASE")
.
- setAngleType(ProbeInspectBorebossMoveBuilder.Angle) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setAngleType(InclinometerBuilder.OutputAngleType) - Method in interface nxopen.mechatronics.InclinometerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAngleUnit(AngleUnit) - Method in interface nxopen.cae.xyplot.AngleAxisStyleSetting
-
License requirements: None.
- setAngleValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setAngleValue(double) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
License requirements: cam_base ("CAM BASE")
.
- setAngleValue(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngleValue(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngleValue(double) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAngleValue(double) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
- setAngleValue(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAngleValueOptimal(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAngular(double) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAngular(double) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setAngularAxis(Axis) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAngularDelta(String) - Method in interface nxopen.geometricutilities.PatternClocking
-
- setAngularDimensionFormat(AngularDimensionFormat) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the angular dimension format
License requirements: None.
- setAngularDimensionValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAngularDirection(Vector3d) - Method in interface nxopen.geometricutilities.ModlDistanceAngle
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAngularPath(PositionControlBuilder.AngularPathOptions) - Method in interface nxopen.mechatronics.PositionControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAngularPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngularPointCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngularSuppressZeros(AngularSuppressZeros) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAngularTol(double) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setAngularTolerance(AngularTolerance) - Method in interface nxopen.annotations.DimensionData
-
Sets the angular tolerances
License requirements: None.
- setAngularTolerance(double) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setAngularTolerance(double) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setAngularTolerance(STLImportBuilder.AngularToleranceTypes) - Method in interface nxopen.facet.STLImportBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setAngularTolerance(double) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAngularTolerance(double) - Method in interface nxopen.features.ExtrudeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngularTolerance(double) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.BracketBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setAngularTolerance(double) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAngularTolerance(double) - Method in interface nxopen.features.VarsweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngularTolerance(double) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the angular tolerance.
- setAngularTolerance(double) - Method in interface nxopen.SketchEvaluator
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAngularTolerance(STLImporter.AngularToleranceType) - Method in interface nxopen.STLImporter
-
Sets the angular tolerance.
- setAngularTolerance(VRMLImporter.AngularToleranceType) - Method in interface nxopen.VRMLImporter
-
Sets the angular tolerance.
- setAngularToleranceFormat(AngularDimensionFormat) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the angular tolerance format
License requirements: None.
- setAngularTolerances(AngularTolerance) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the global angular tolerances for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAngularToleranceValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAngularUnits(InspectionCmmCommandBuilder.AngularUnitsOptions) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAngularUnits(UFMotion.AngularUnitsType) - Method in interface nxopen.uf.UFMotion
-
- setAngularVelocityDirection(Direction) - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAnimateGunRotation(boolean) - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Sets the animate gun rotation
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setAnimationAccuracy(SimulationOptionsBuilder.Accuracy) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setAnimationCurrentStep(int) - Method in interface nxopen.motion.LoadTransferControl
-
Sets current step in animation
License requirements: mechanisms ("MECHANISMS")
.
- setAnimationPoints(double, Unit, double, Unit, int) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
Sets animation points
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAnimationSpeed(int) - Method in interface nxopen.cam.PathDisplay
-
Set animation speed
License requirements: None.
- setAnnoLayer(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAnnotation(NoteBase) - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAnnotation3dData(boolean) - Method in interface nxopen.PartSaveOptions
-
Sets the option indicating whether to generate 3D Annotation data and store in
NX part Quick Access Folder when you save the part file
License requirements: None.
- setAnnotationAttributes(AmeElectricalConnectionPotentialType, ElectricalAnnotationSettingsBuilder.AnnotationAttrType[]) - Method in interface nxopen.ame.ElectricalAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAnnotationAttributes(AmeOpticalConnectionFiberType, OpticalAnnotationSettingsBuilder.AnnotationAttrType[]) - Method in interface nxopen.ame.OpticalAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAnnotationInsideGeometry(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setAnnotationMode(MeasureBuilder.AnnotationType) - Method in interface nxopen.MeasureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAnnotationOrigin(Point3d) - Method in interface nxopen.annotations.Annotation
-
Sets the origin (location) of the annotation.
- setAnnotationPlane(Xform) - Method in interface nxopen.annotations.Annotation
-
Sets the annotation plane.
- setAnnotationPreference(BaseCustomSymbolBuilder.AnnotationPreferences) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAnnotations(boolean) - Method in interface nxopen.ObjectTypeSelector
-
License requirements: None.
- setAnnotationSetSeparator(GeneralAnnotationSettingsBuilder.AnnotationSeparator) - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAnnotationTemplate(String) - Method in interface nxopen.uf.UFDrf
-
- setAnnotationType(HatchBuilder.AnnotationTypes) - Method in interface nxopen.annotations.HatchBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAnnotationType(HatchFillSettingsBuilder.AnnotationTypes) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAnnotationType(PostAnnotationBuilder.Type) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the annotation type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setAnnTolerance(double) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setAOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setAP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP3Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP3LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP3Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAP3RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAperture(double) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setApertureType(CameraBuilder.Aperture) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setApexReversed(boolean) - Method in interface nxopen.geometricutilities.FrameOnPathBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setApiExitName(String) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApiExitName(String) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAPillarFeature(HeadImpactAPillar) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setApiType(LaminateImportedLayupBuilder.ApiTypeEnum) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setAppContextMode(int) - Method in interface nxopen.features.ShipCollection
-
Sets the ship design mode
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAppDistChanged(boolean) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Flag indicating whether approach distance changed.
- setAppDistChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Flag indicating whether approach distance changed.
- setAppearance(HumanData.AppearanceType) - Method in interface nxopen.features.HumanBuilder
-
Sets human appearance data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setAppend(boolean) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setAppendedNxTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedStandardTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedText(AppendedText) - Method in interface nxopen.annotations.DimensionData
-
Sets the appended text
License requirements: None.
- setAppendedText(AppendedText) - Method in interface nxopen.annotations.IAppendedText
-
Sets the appended text
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedText(Lettering) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the appended text
License requirements: None.
- setAppendedText(Tag, int, UFDrf.AppendedText[]) - Method in interface nxopen.uf.UFDrf
-
- setAppendedText(Tag, UFGdt.TextLocation, int, String[]) - Method in interface nxopen.uf.UFGdt
-
- setAppendedTextAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedTextCharSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedTextColor(NXColor) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedTextFont(int) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedTextItalicized(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedTextLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedTextLineWidth(LineWidth) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedTextSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendedTextSymbolAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAppendMethod(CompanionResultBuilder.ResultAppendMethod) - Method in interface nxopen.cae.CompanionResultBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAppendMethod(ResultsManipulationBuilder.ResultAppendMethod) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
- setAppendRefset(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setApplication(FileNewApplication) - Method in interface nxopen.FileNew
-
- setApplicationBuilder(IGenericFileNewApplicationBuilder) - Method in interface nxopen.gateway.GenericFileNewBuilder
-
- setApplicationContext(ApplicationContext) - Method in interface nxopen.features.sheetmetal.SheetmetalBaseBuilder
-
Set the application context.
- setApplicationContext(ApplicationContext) - Method in interface nxopen.features.sheetmetal.SheetmetalComponentBuilder
-
Set the application context.
- setApplicationData(IApplicationData) - Method in interface nxopen.cae.ftk.IApplicationDataOwner
-
Sets the application specific data to the record
License requirements: None.
- setApplicationLogging(boolean) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setApplicationMethod(OverstockBuilder.ApplicationType) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setApplicationName(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setApplicationName(String) - Method in interface nxopen.mechatronics.ParameterStockBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setApplicationType(MirrorShipStructureBuilder.AppTypes) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setApplicationtype(ScalarForceBuilder.ApplicationType) - Method in interface nxopen.motion.ScalarForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setApplicationType(ScalarTorqueBuilder.AppType) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setApplicationtype(VobjectApplicationType) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setApplicationType(RoutingApplicationView.AppType) - Method in interface nxopen.preferences.RoutingApplicationView
-
Sets the given routing application type.
- setAppliedToType(BoundaryTurnMemberFineFinishCorner.AppliedTo) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
License requirements: cam_base ("CAM BASE")
.
- setApplyActionOffset(boolean) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setApplyAtBoundary(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setApplyAtPartSurface(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setApplyAtStepover(boolean) - Method in interface nxopen.cam.UpDownCutting
-
License requirements: cam_base ("CAM BASE")
.
- setApplyBaseOffset(boolean) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setApplyColor(boolean) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setApplyConstraintsToAll(boolean) - Method in interface nxopen.features.PoleSmoothingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setApplyCornersSmoothing(boolean) - Method in interface nxopen.cam.NcmSmoothingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApplyCornersSmoothingTransfers(boolean) - Method in interface nxopen.cam.NcmSmoothingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApplyCrosshatchToSectionView(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setApplyEndCut(boolean) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setApplyEndCut(boolean) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setApplyEngageSettings(boolean) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApplyFilletAt(DmBndBuilder.ApplyFilletAtTypes) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setApplyFlangeSetback(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setApplyFlangeSetback(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setApplyLeadTilt(boolean) - Method in interface nxopen.cam.InterpolateVector
-
License requirements: cam_base ("CAM BASE")
.
- setApplyMarginToInnerBoundToggle(boolean) - Method in interface nxopen.geometricutilities.PatternFill
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setApplyOffset(boolean) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Sets the value that whether the offset is applied
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setApplyOffset(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setApplyOn(StepoverBuilder.ApplyTypes) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApplyPmi(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setApplyRemoteConstraints(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setApplyRetractSettings(boolean) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApplySafetyToDirect(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApplySafetyToDirect(boolean) - Method in interface nxopen.cam.NcmTransfer
-
License requirements: cam_base ("CAM BASE")
.
- setApplySmoothing(boolean) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setApplyTemplateToAll(boolean) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setApplyToAll(boolean) - Method in interface nxopen.features.VariableOffsetBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setApplyToAllFaces(boolean) - Method in interface nxopen.DisplayModification
-
Sets the apply to all faces flag.
- setApplyToAllFromSameComp(boolean) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setApplyToAllSections(boolean) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setApplyToComponent(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setApplyToCopyOfSheets(boolean) - Method in interface nxopen.features.TrimSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setApplyToLastPass(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setApplyToOwningParts(boolean) - Method in interface nxopen.DisplayModification
-
Sets the flag to apply display changes to Owning Parts.
- setApplyToWorkPart(boolean) - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
License requirements: None.
- setApplyWebSetback(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setApplyWebSetback(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setApproach(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setApproachButton() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Set gun approach
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setApproachDirection(Direction) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setApproachDirection(double[]) - Method in interface nxopen.cam.InspectionPathBuilder
-
Sets the approach direction vector values
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setApproachDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setApproachDistance(double) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setApproachFlag(ProbeProtectedParametersBuilder.AppMethodTypes) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApproachMethod(NcmTransferBuilder.AppDepMethodTypes) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApproachPathMode(TurnAvoidanceApproachBuilder.ApproachPathModes) - Method in interface nxopen.cam.TurnAvoidanceApproachBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApproachPostCommands(TaggedObject) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApproachToggle() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Returns the get updateGunAssignmentToggle
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setApproachToolAxis(SmartObject) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApproachToolAxisOption(NcmTransferBuilder.AppDepToolAxisOptions) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApproachVector(SmartObject) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setApproximateOffset(boolean) - Method in interface nxopen.features.ThickenBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setApproximateSheetbodyOption(boolean) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setApproximateSheetbodyOption(boolean) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setApproximation(CompensateRoughDataBuilder.ApproximationType) - Method in interface nxopen.die.CompensateRoughDataBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setApproxOption(boolean) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setApproxSheetBody(boolean) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setArbitraryNoteTitle(String[]) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Sets the arbitrary note value.
- setArc(NXObject) - Method in interface nxopen.cam.InspectionScanArcBuilder
-
License requirements: None.
- setArcAngle(double) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArcAngle(double) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArcAngle(double) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setArcAxis(Direction) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
License requirements: None.
- setArcAxis(Vector3d) - Method in interface nxopen.cam.PathCircularMotion
-
License requirements: cam_base ("CAM BASE")
.
- setArcAxis(Vector3d) - Method in interface nxopen.cam.PathContactMotion
-
License requirements: cam_base ("CAM BASE")
.
- setArcAxisType(CircularAboutAxisMoveBuilder.AxisType) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
License requirements: None.
- setArcCenter(Point3d) - Method in interface nxopen.cam.PathCircularMotion
-
License requirements: cam_base ("CAM BASE")
.
- setArcCenter(Point3d) - Method in interface nxopen.cam.PathContactMotion
-
License requirements: cam_base ("CAM BASE")
.
- setArcDirection(CamPathDir) - Method in interface nxopen.cam.PathContactMotion
-
License requirements: cam_base ("CAM BASE")
.
- setArcExtendMethod(CircularAboutAxisMoveBuilder.ExtensionType) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
License requirements: None.
- setArchiveControllerType(int) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the archive controller type
License requirements: None.
- setArchiveControllerVersion(String) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the archive controller version
License requirements: None.
- setArchiving(UFPatt.Switch) - Method in interface nxopen.uf.UFPatt
-
- setArchPartPath(String) - Method in interface nxopen.linedesigner.CreateSystemBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setArcLength(String) - Method in interface nxopen.DatumConstraint
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setArcLength(double) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setArcLengthType(DatumConstraint.CurveOption) - Method in interface nxopen.DatumConstraint
-
Sets
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setArcOpensDown(boolean) - Method in interface nxopen.routing.GapArcSegment
-
License requirements: routing_base ("Routing Basic")
.
- setArcRadius(double) - Method in interface nxopen.cam.PathCircularMotion
-
License requirements: cam_base ("CAM BASE")
.
- setArcRadius(double) - Method in interface nxopen.cam.PathContactMotion
-
License requirements: cam_base ("CAM BASE")
.
- setArcRadius(double) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setArcSegmentsType(SpineCurveBuilder.ArcSegmentsTypes) - Method in interface nxopen.features.SpineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setArcVector(NXObject) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setArcVector(NXObject) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setArea(EmbedManagerBuilder.UsageAreaTypes) - Method in interface nxopen.features.EmbedManagerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAreaControl(int) - Method in interface nxopen.features.FillHoleBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.
- setAreafillAngle(double) - Method in interface nxopen.annotations.HatchBuilder
-
- setAreafillAngle(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAreaFillAngle(double) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAreafillAngle(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setAreaFillMaterial(AreaFillMaterial) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAreafillMaterial(Tag, UFDrf.ValidMaterial) - Method in interface nxopen.uf.UFDrf
-
- setAreaFillScale(double) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAreafillScale(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setAreAllOccurrencesIncluded(boolean) - Method in interface nxopen.annotations.QueryPmiBuilder
-
Sets an all occurrences of selected component to be included toggle
License requirements: None.
- setAreaMillingCutDirection(AreaMillingContainment.CutDirectionTypes) - Method in interface nxopen.cam.AreaMillingSteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setAreas(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Sets all of the areas stored with this UDO
License requirements: None.
- setAreas(int, int, double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Replaces the areas stored with this UDO in the specified range with a new array of areas
License requirements: None.
- setAreaSize(String) - Method in interface nxopen.annotations.DatumTargetBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setAreaSymbol(FeatureControlFrameDataBuilder.AreaSymbolType) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setAreAttachedPmiIncluded(boolean) - Method in interface nxopen.annotations.QueryPmiBuilder
-
Sets an attached pmi to selected geometry to be included toggle
License requirements: None.
- setAreBordersEnabled(boolean) - Method in interface nxopen.facet.FeatureExtractionBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setAreReferencingMemberObjectsIncluded(boolean) - Method in interface nxopen.annotations.QueryPmiBuilder
-
Sets a referencing member objects of selected geometry to be included toggle
License requirements: None.
- setAreRegionsEnabled(boolean) - Method in interface nxopen.facet.FeatureExtractionBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setAroundEdgeDiaOption(CircularImprintBuilder.AroundEdgeDiaType) - Method in interface nxopen.cae.CircularImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setArrangement(ViewLayoutManager.ArrangementType) - Method in interface nxopen.cae.ViewLayoutManager
-
Sets the cae view layout arrangement type
License requirements: None.
- setArrangementName(String) - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrangements(AssembliesParameterPropertiesBuilder.ArrangementOptions) - Method in interface nxopen.assemblies.AssembliesParameterPropertiesBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setArrangementSpecific(boolean) - Method in interface nxopen.positioning.ComponentConstraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setArray(AMEBaseNode[]) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Sets the list of objects in the selection list.
- setArray(Annotation[]) - Method in interface nxopen.annotations.SelectAnnotationList
-
Sets the list of objects in the selection list.
- setArray(BaseCustomSymbol[]) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Sets the list of objects in the selection list.
- setArray(OrdinateDimension[]) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Sets the list of objects in the selection list.
- setArray(TableSection[]) - Method in interface nxopen.annotations.SelectTableSectionList
-
Sets the list of objects in the selection list.
- setArray(Component[]) - Method in interface nxopen.assemblies.SelectComponentList
-
Sets the list of objects in the selection list.
- setArray(boolean) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setArray(CAEBody[]) - Method in interface nxopen.cae.SelectCAEBodyList
-
Sets the list of objects in the selection list.
- setArray(CAEEdge[]) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Sets the list of objects in the selection list.
- setArray(CAEFace[]) - Method in interface nxopen.cae.SelectCAEFaceList
-
Sets the list of objects in the selection list.
- setArray(FEElemFace[]) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Sets the list of objects in the selection list.
- setArray(FENode[]) - Method in interface nxopen.cae.SelectFENodeList
-
Sets the list of objects in the selection list.
- setArray(Mesh[]) - Method in interface nxopen.cae.SelectMeshList
-
Sets the list of objects in the selection list.
- setArray(CAMFeature[]) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Sets the list of objects in the selection list.
- setArray(DraftingView[]) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Sets the list of objects in the selection list.
- setArray(DrawingView[]) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Sets the list of objects in the selection list.
- setArray(FacetedBody[]) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Sets the list of objects in the selection list.
- setArray(BodyFeature[]) - Method in interface nxopen.features.SelectBodyFeatureList
-
Sets the list of objects in the selection list.
- setArray(DatumCsys[]) - Method in interface nxopen.features.SelectDatumCsysList
-
Sets the list of objects in the selection list.
- setArray(Feature[]) - Method in interface nxopen.features.SelectFeatureList
-
Sets the list of objects in the selection list.
- setArray(SubdivisionBody[]) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Sets the list of objects in the selection list.
- setArray(Component[]) - Method in interface nxopen.layout2d.SelectComponentList
-
Sets the list of objects in the selection list.
- setArray(CollisionSensor[]) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Sets the list of objects in the selection list.
- setArray(HydraulicCylinder[]) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Sets the list of objects in the selection list.
- setArray(LogicObject[]) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Sets the list of objects in the selection list.
- setArray(PneumaticCylinder[]) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Sets the list of objects in the selection list.
- setArray(Body[]) - Method in interface nxopen.SelectBodyList
-
Sets the list of objects in the selection list.
- setArray(CoordinateSystem[]) - Method in interface nxopen.SelectCoordinateSystemList
-
Sets the list of objects in the selection list.
- setArray(Curve[]) - Method in interface nxopen.SelectCurveList
-
Sets the list of objects in the selection list.
- setArray(DatumPlane[]) - Method in interface nxopen.SelectDatumPlaneList
-
Sets the list of objects in the selection list.
- setArray(DisplayableObject[]) - Method in interface nxopen.SelectDisplayableObjectList
-
Sets the list of objects in the selection list.
- setArray(Edge[]) - Method in interface nxopen.SelectEdgeList
-
Sets the list of objects in the selection list.
- setArray(Expression[]) - Method in interface nxopen.SelectExpressionList
-
Sets the list of objects in the selection list.
- setArray(Face[]) - Method in interface nxopen.SelectFaceList
-
Sets the list of objects in the selection list.
- setArray(IBaseCurve[]) - Method in interface nxopen.SelectIBaseCurveList
-
Sets the list of objects in the selection list.
- setArray(IBasePlane[]) - Method in interface nxopen.SelectIBasePlaneList
-
Sets the list of objects in the selection list.
- setArray(ICurve[]) - Method in interface nxopen.SelectICurveList
-
Sets the list of objects in the selection list.
- setArray(INXObject[]) - Method in interface nxopen.SelectINXObjectList
-
Sets the list of objects in the selection list.
- setArray(IParameterizedSurface[]) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Sets the list of objects in the selection list.
- setArray(ModelingView[]) - Method in interface nxopen.SelectModelingViewList
-
Sets the list of objects in the selection list.
- setArray(NXObject[]) - Method in interface nxopen.SelectNXObjectList
-
Sets the list of objects in the selection list.
- setArray(TaggedObject[]) - Method in interface nxopen.SelectObjectList
-
Sets the list of objects in the selection list.
- setArray(Part[]) - Method in interface nxopen.SelectPartList
-
Sets the list of objects in the selection list.
- setArray(Point[]) - Method in interface nxopen.SelectPointList
-
Sets the list of objects in the selection list.
- setArray(Spline[]) - Method in interface nxopen.SelectSplineList
-
Sets the list of objects in the selection list.
- setArray(TaggedObject[]) - Method in interface nxopen.SelectTaggedObjectList
-
Sets the list of objects in the selection list.
- setArray(View[]) - Method in interface nxopen.SelectViewList
-
Sets the list of objects in the selection list.
- setArrayAngle(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayAngle(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrayCircularIncrementAngle(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayCircularIncrementAngle(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrayCircularNumber(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayCircularNumber(int) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrayCircularRadius(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayCircularRadius(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrayCircularStartAngle(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayCircularStartAngle(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrayIndex(int) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setArrayNumberAlongXc(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayNumberAlongXc(int) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrayNumberAlongYc(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayNumberAlongYc(int) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrayOffsetXc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayOffsetXc(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrayOffsetYc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayOffsetYc(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrayOriginPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setArrayOriginPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrowAngle(double) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setArrowAngle(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowDirection(CuttingPlaneSymbolBuilder.ArrowDirectionOption) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
License requirements: geometric_tol ("GDT")
.
- setArrowDirection(ArrowDirectionType) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setArrowDirection(Direction) - Method in interface nxopen.drawings.SectionLineBuilder
-
- setArrowDirection(ArrowDirectionType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowDisplay(ArrowDisplay) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the arrow display
License requirements: None.
- setArrowDisplayFlag(boolean) - Method in interface nxopen.cam.DisplayPaint
-
License requirements: cam_base ("CAM BASE")
.
- setArrowDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setArrowhead(LeaderData.ArrowheadType) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setArrowheadAngle(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setArrowHeadAngle(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowheadAngle(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowheadIncludedAngle(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the arrowhead included angle
License requirements: None.
- setArrowheadIncludedAngle(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setArrowheadLength(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the arrowhead length
License requirements: None.
- setArrowheadLength(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setArrowheadLength(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setArrowHeadLength(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowheadLength(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowheadStyle(SectionLineStyleBuilder.ArrowheadStyleType) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setArrowHeadStyle(ViewProjectedArrowSettingsBuilder.DimensionsStyleType) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowHeadTail(double) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setArrowHeadTail(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowLength(double) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
License requirements: geometric_tol ("GDT")
.
- setArrowLength(double) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setArrowLength(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setArrowLength(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowLength(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowLineDistanceToGeometry(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowLineLength(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowSideData(LineWeldSideData) - Method in interface nxopen.annotations.LineWeldData
-
Sets the arrow side data
License requirements: None.
- setArrowSideOption(TrimAndExtendBuilder.ArrowSideType) - Method in interface nxopen.features.TrimAndExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setArrowSideOption(TrimExtendBuilder.ArrowSideOptions) - Method in interface nxopen.features.TrimExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setArrowSize(double) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setArrowStyle(ArrowStyleType) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setArrowStyle(ArrowStyleType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setArrowStyle(DiagrammingFlowdirectionarrowstyle) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setArrowType(DiagrammingArrowtype) - Method in interface nxopen.diagramming.LeaderLineBuilder
-
License requirements: None.
- setArticulationStopTolerance(double) - Method in interface nxopen.uf.UFMotion
-
- setAskEditControlHandler(Tree.AskEditControlCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the node-edit-control callback
License requirements: None.
- setAsmStructure(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setAsMyDefaultTask() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the option to set as the current user's default task.
- setAsOriginalOption(boolean) - Method in interface nxopen.features.FreeTransformerBuilder
-
License requirements: None.
- setAsOriginalOption(boolean) - Method in interface nxopen.features.MeshTransformerBuilder
-
License requirements: None.
- setAsPatchSurface(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
License requirements: None.
- setAsPatchSurface(boolean) - Method in interface nxopen.tooling.TrimRegionBuilder
-
License requirements: None.
- setAspect(String) - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAspectOperator(EditClauseBuilder.Operator) - Method in interface nxopen.ame.EditClauseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAspectPlacement(boolean) - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAspectPlacement(boolean) - Method in interface nxopen.ame.InsertSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAspectRatio(double) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setAspectRatio(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setAspectRatioOption(DxfdwgImporter.AspectRatioOptions) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setAspectSelection(BaseEvaluatorBuilder.ContextType) - Method in interface nxopen.ame.AncestorEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAspectSelection(BaseEvaluatorBuilder.ContextType) - Method in interface nxopen.ame.ChildrenEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAspectSelection(BaseEvaluatorBuilder.ContextType) - Method in interface nxopen.ame.ParentEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAspectSelection(BaseEvaluatorBuilder.ContextType) - Method in interface nxopen.ame.PlcSymbolsEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAspectStates(NXObject[], int[]) - Method in interface nxopen.ame.EditEngineeringObjectBuilder
-
Pass Aspect States To Builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAsRequiredQuantity(Component) - Method in interface nxopen.assemblies.ComponentAssembly
-
Sets the as-required quantity on this component.
- setAssemblyArrangement(String) - Method in interface nxopen.drawings.BaseViewStyle
-
Sets the configuration for the arrangement in assembly after an
arrangement part file is loaded.
- setAssemblyConstraintsDelay(boolean) - Method in interface nxopen.Update
-
License requirements: None.
- setAssemblyCrosshatching(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setAssemblyCrosshatching(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setAssemblyCrossHatching(boolean) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets the status of assembly cross hatching.
- setAssemblyCrossHatching(boolean) - Method in interface nxopen.preferences.SectionViewPreferences
-
Sets the status of assembly cross hatching.
- setAssemblyExtentLength(int, double) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the extent length for the fastener assembly data
License requirements: None.
- setAssemblyName(String) - Method in interface nxopen.cae.connections.ComposerData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAssemblyOptions(UpdateShipLibraryBuilder.ShipLibAssemblyOption) - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAssemblyPart(String) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setAssemblyPart(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAssemblyPart(Part) - Method in interface nxopen.layout2d.AssemblyFromLayout2dBuilder
-
License requirements: None.
- setAssemblyTolerance(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAssemLoadOptions(UFAssem.LoadOptions) - Method in interface nxopen.uf.UFAssem
-
- setAssemOptions(UFAssem.Options) - Method in interface nxopen.uf.UFAssem
-
- setAssignAlternateIds(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setAssignColor(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
License requirements: None.
- setAssignColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssignDefaultCorner(boolean) - Method in interface nxopen.routing.LinearPathSettings
-
License requirements: routing_base ("Routing Basic")
.
- setAssignDefaultElbow(boolean) - Method in interface nxopen.routing.LinearPathSettings
-
License requirements: routing_base ("Routing Basic")
.
- setAssignedAxes(String[]) - Method in interface nxopen.sim.KinematicChannelBuilder
-
Sets a list of assigned axes of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setAssignedAxis(String) - Method in interface nxopen.sim.KinematicChannelBuilder
-
Sets an assigned axis of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setAssignedFormula(AdapterFormula) - Method in interface nxopen.mechatronics.AdapterSignalBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAssignedUser(String) - Method in interface nxopen.issue.IssueContent
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setAssignedUser(String) - Method in interface nxopen.issue.IssueContentBuilder
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setAssignPartNumber(String) - Method in interface nxopen.pdm.PartBuilder
-
Sets the part number explicitly into builder.
- setAssignPartType(String) - Method in interface nxopen.pdm.PartBuilder
-
Sets the part type explicitly into builder.
- setAssignStockMethod(PathStockPreferenceBuilder.AssignMethod) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- setAssignStockMethod(PathStockBuilder.AssignMethod) - Method in interface nxopen.routing.PathStockBuilder
-
Sets the method to determine which stock to assign.
- setAssignTangencySide(AssignTangencyBuilder.TangencySide) - Method in interface nxopen.routing.AssignTangencyBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setAssignWeldPMI(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setAssignWeldPMI(boolean) - Method in interface nxopen.weld.PlugSlotBuilder
-
License requirements: None.
- setAssignWeldPMI(boolean) - Method in interface nxopen.weld.UserDefinedWeldBuilder
-
License requirements: ugweld ("UG WELD")
.
- setAssignWeldPMI(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setAssocDoubleArray(UFVariant, String, String, double) - Method in interface nxopen.uf.UFMom
-
- setAssocFileCopy(String, boolean) - Method in interface nxopen.uf.UFClone
-
- setAssocFileDir(String, String) - Method in interface nxopen.uf.UFClone
-
- setAssocFileRootDir(String) - Method in interface nxopen.uf.UFClone
-
- setAssocHighlightColor(int) - Method in interface nxopen.preferences.SessionPmi
-
Sets the associated highlight color
License requirements: None.
- setAssociate(boolean) - Method in interface nxopen.cae.ConvertToConvergentBodyBuilder
-
License requirements: None.
- setAssociatedCadAsWork(Part) - Method in interface nxopen.cae.FemPart
-
Sets the cad part associated with the fem as work.
- setAssociatedCurve(NXObject) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAssociatedFilesRootDirectory(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setAssociatedObject(AssociatedObject) - Method in interface nxopen.annotations.IPmi
-
Sets the associated object.
- setAssociatedObject(AssociatedObject) - Method in interface nxopen.annotations.PmiData
-
Sets the associated object
License requirements: None.
- setAssociatedObjects(TaggedObject[]) - Method in interface nxopen.cae.CaeLabel
-
Set Associated Objects into the CAE Notes
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAssociatedObjects(TaggedObject[]) - Method in interface nxopen.cae.CaeNote
-
Set Associated Objects into the CAE Notes
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAssociatedObjects(NXObject[]) - Method in interface nxopen.drawings.SelectRegionBuilder
-
Set the associated object
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setAssociatedObjects(DisplayableObject[]) - Method in interface nxopen.markup.MarkupObject
-
Sets the associated objects
License requirements: None.
- setAssociatedObjects(NXObject[]) - Method in interface nxopen.Validation
-
Specifies or removes associated objects for the check.
- setAssociatedPortName(String) - Method in interface nxopen.motion.OutputPortAssociation
-
License requirements: mechanisms ("MECHANISMS")
.
- setAssociatedPortName(String) - Method in interface nxopen.motion.PortVariable
-
License requirements: mechanisms ("MECHANISMS")
.
- setAssociateToSketch(boolean) - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAssociationSetting(boolean) - Method in interface nxopen.tooling.PocketBuilder
-
License requirements: None.
- setAssociationTool(PiercingInsertBuilder.AssociationToolType) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setAssociationTool(PiercingInsertMiniToolsBuilder.AssociationToolItems) - Method in interface nxopen.tooling.PiercingInsertMiniToolsBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAssociative(boolean) - Method in interface nxopen.assemblies.ComponentPatternBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setAssociative(boolean) - Method in interface nxopen.die.AddSurfBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAssociative(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAssociative(boolean) - Method in interface nxopen.display.BoundedGridBuilder
-
License requirements: None.
- setAssociative(boolean) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAssociative(boolean) - Method in interface nxopen.drawings.DetailViewBuilder
-
License requirements: None.
- setAssociative(boolean) - Method in interface nxopen.drawings.HingeLineBuilder
-
License requirements: None.
- setAssociative(boolean) - Method in interface nxopen.drawings.ViewPlacementBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAssociative(boolean) - Method in interface nxopen.facet.FacetBodyFromBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setAssociative(boolean) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociative(boolean) - Method in interface nxopen.features.AssociativeLineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociative(boolean) - Method in interface nxopen.features.BodyByEquationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setAssociative(boolean) - Method in interface nxopen.features.BridgeCurveBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.CircularBlendCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociative(boolean) - Method in interface nxopen.features.CopyPasteBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setAssociative(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociative(boolean) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.IntersectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.IsoclineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setAssociative(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.MakeSolidBuilder
-
License requirements: None.
- setAssociative(boolean) - Method in interface nxopen.features.MathIntegrationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociative(boolean) - Method in interface nxopen.features.MoveObjectBuilder
-
License requirements: None.
- setAssociative(boolean) - Method in interface nxopen.features.Offset3DCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.PatternGeometryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.PromotionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Sets the setting which decides whether the flattened solid will be associative to parent body.
- setAssociative(boolean) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Sets the setting which decides whether the flattened solid will be associative to parent body.
- setAssociative(boolean) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAssociative(boolean) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAssociative(boolean) - Method in interface nxopen.features.SpineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.StudioSplineBuilder
-
- setAssociative(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociative(boolean) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.UntrimBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.VirtualCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.WaveDatumBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociative(boolean) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
License requirements: None.
- setAssociative(boolean) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.WavePointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociative(boolean) - Method in interface nxopen.features.WaveRoutingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.WaveSketchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.WrapBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.features.WrapGeometryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssociative(boolean) - Method in interface nxopen.geometricutilities.CurveOptions
-
Sets the associativity option
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociative(boolean) - Method in interface nxopen.mechatronics.AnimationConversionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAssociative(boolean) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setAssociative(boolean) - Method in interface nxopen.SketchIntersectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setAssociative(boolean) - Method in interface nxopen.SketchIntersectionPointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setAssociative(boolean) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setAssociative(boolean) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAssociative(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setAssociative(boolean) - Method in interface nxopen.weld.TransformBuilder
-
License requirements: ugweld ("UG WELD")
.
- setAssociativeAlignment(boolean) - Method in interface nxopen.drawings.MultipleViewPlacementBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAssociativeAlignment(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAssociativeAlignment(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAssociativeAlignment(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flag indicating whether to associatively align the view when placing it
License requirements: None.
- setAssociativeAngle(Scalar) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the value of angle of a member view.
- setAssociativeEditFreeForm(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the associative edit free form option.
- setAssociativeObjects(DisplayableObject[]) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the associative objects of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAssociativeObjects(DisplayableObject[]) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the associative objects of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAssociativeObjects(DisplayableObject[]) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the associative objects of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAssociativeOrientation(boolean) - Method in interface nxopen.drawings.OvtBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAssociativeOrigin(Annotation.AssociativeOriginData, Point3d) - Method in interface nxopen.annotations.Annotation
-
Associates the annotation's origin to the specified geometry.
- setAssociativeOrigin(Annotation.AssociativeOriginData) - Method in interface nxopen.annotations.OriginBuilder
-
Associates the annotation's origin to the specified objects
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setAssociativeOrigin(Tag, UFDrf.AssociativeOrigin, double[]) - Method in interface nxopen.uf.UFDrf
-
- setAssociativeOutputOption(boolean) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAssociativePlane(Plane) - Method in interface nxopen.display.DynamicSectionBuilder
-
Makes dynamic section associative to the specified plane
The plane must be a smart plane; otherwise an error will be reported.
- setAssociativePosition(boolean) - Method in interface nxopen.tooling.StandardPartBuilder
-
License requirements: None.
- setAssociativePosition(boolean) - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAssociativeSplit(boolean) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setAssociativeToggle(boolean) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setAssociativity(int, Associativity) - Method in interface nxopen.annotations.Annotation
-
- setAssociativity(int, Associativity[]) - Method in interface nxopen.annotations.DimensionData
-
Sets the associativity at specified index.
- setAssociativity(boolean) - Method in interface nxopen.SketchProjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setAssociativity(boolean) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setAssociativityData(Tag, int, UFDrf.ObjectAssocData[]) - Method in interface nxopen.uf.UFDrf
-
- setAssociativityEnumType(MapleBuilder.AssociativityEnum) - Method in interface nxopen.features.MapleBuilder
-
- setAssociativityForLightweightSectionViews(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setAssociativityToggle(boolean) - Method in interface nxopen.features.MapleBuilder
-
- setAssociativityType(MathIntegrationBuilder.AssociativityTypes) - Method in interface nxopen.features.MathIntegrationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAssocIntArray(UFVariant, String, String, int) - Method in interface nxopen.uf.UFMom
-
- setAssocStringArray(UFVariant, String, String, String) - Method in interface nxopen.uf.UFMom
-
- setAssoToggle(boolean) - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAssoToggle(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAssoToggle(boolean) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAtl(SeatBeltAnchorageBuilder.ATLType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setAtLeadingEdge(double) - Method in interface nxopen.cam.LeadAngles
-
License requirements: cam_base ("CAM BASE")
.
- setAttachbody(NXObject) - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
Sets the attached rigid body.
- setAttachedGeometry(NXObject) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the attached geometry, this is mainly used to set the initial parameter
License requirements: None.
- setAttachedStockLength(Component) - Method in interface nxopen.routing.StockCollection
-
- setAttachFidelityCheckData(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the attach FC data flag for I-DEAS gateway
License requirements: None.
- setAttachLogFile(boolean) - Method in interface nxopen.uf.UFClone
-
- setAttachment(NXObject) - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
Sets the attachment.
- setAttachment(ConnectorBuilder.AttachmentType) - Method in interface nxopen.motion.ConnectorBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setAttachment(GeneralCouplerBuilder.AttachmentType) - Method in interface nxopen.motion.GeneralCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setAttachment(Attachment) - Method in interface nxopen.uistyler.StylerItem
-
Specifies the updated dialog item attachment information
License requirements: None.
- setAttachmentDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.BracketBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAttachmentPlateOption(StiffenerBuilder.AttachmentOption) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setAttachmentPoint(Point) - Method in interface nxopen.mechatronics.LinearLimitJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAttachmentPoint(Point) - Method in interface nxopen.mechatronics.LinearSpringJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAttachmentType(AnchorType) - Method in interface nxopen.cae.xyplot.MarkerStyleSetting
-
License requirements: None.
- setAttachmentType(RapidSurfaceBuilder.AttachmentTypes) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setAttachmentType(IssueAttachment.Type) - Method in interface nxopen.issue.IssueAttachment
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setAttachmentVector(Direction) - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAttachmentVector(Direction) - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAttachPoint(Point) - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAttachPoint(Point) - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAttachToIdSymbolVertex(boolean) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Sets the id symbol attachment method
License requirements: None.
- setAttachType(AttachElementsBuilder.AttachOption) - Method in interface nxopen.cae.AttachElementsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAttachTypeLeft(Attachment.AttachType) - Method in interface nxopen.uistyler.Attachment
-
Sets the attach type left
License requirements: None.
- setAttachTypeRight(Attachment.AttachType) - Method in interface nxopen.uistyler.Attachment
-
Sets the attach type right
License requirements: None.
- setAttachTypeTop(Attachment.AttachType) - Method in interface nxopen.uistyler.Attachment
-
Sets the attach type top
License requirements: None.
- setAttentionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the color that an HD3D objects associated objects are highlighted with when the HD3D object is selected.
- setAtTimestamp(boolean) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setAttraction(int) - Method in interface nxopen.features.FillHoleBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.
- setAtTrailingEdge(double) - Method in interface nxopen.cam.LeadAngles
-
License requirements: cam_base ("CAM BASE")
.
- setAttribName(String) - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAttribRef(String) - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAttribute(Pmi) - Method in interface nxopen.annotations.PmiAttributeBuilder
-
Sets the
Pmi
for this annotation
License requirements: None.
- setAttribute(CAMAttribute) - Method in interface nxopen.cam.fbm.Feature
-
Sets the attribute value(s) to the same value(s) as another attribute
License requirements: cam_base ("CAM BASE")
.
- setAttribute(int, String, String) - Method in interface nxopen.features.shipdesign.RoomAttributeListBuilder
-
Sets the specific attribute name and value given the index in the list.
- setAttribute(String, int) - Method in interface nxopen.NXObject
-
- setAttribute(String, int, Update.Option) - Method in interface nxopen.NXObject
-
- setAttribute(String, double) - Method in interface nxopen.NXObject
-
- setAttribute(String, double, Update.Option) - Method in interface nxopen.NXObject
-
- setAttribute(String, String) - Method in interface nxopen.NXObject
-
- setAttribute(String, String, Update.Option) - Method in interface nxopen.NXObject
-
- setAttribute(String) - Method in interface nxopen.NXObject
-
- setAttribute(String, Update.Option) - Method in interface nxopen.NXObject
-
- setAttribute(String, String) - Method in interface nxopen.pdm.DatabaseAttributeManager
-
Sets the value of a writable database attribute.
- setAttributeAndValue(String[], String[]) - Method in interface nxopen.cam.CutterExport
-
The attributes and values
License requirements: None.
- setAttributeColor(NXColor) - Method in interface nxopen.die.DieAttributesBuilder
-
License requirements: None.
- setAttributeColor(NXColor) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAttributeCustomizedFormulas(String) - Method in interface nxopen.validate.CheckerNode
-
License requirements: None.
- setAttributeForAllObjects(RoutingAttributeIdentifierType, String, String) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The attribute value setter for all objects
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setAttributeForObject(NXObject, RoutingAttributeIdentifierType, String, String) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The object attribute value method setter
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setAttributeHolder(AttributeHolder) - Method in interface nxopen.routing.PlaceElbowsBuilder
-
Set the Attribute Holder
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
- setAttributeHolder(AttributeHolder) - Method in interface nxopen.routing.PlacePartBuilder
-
Sets Attribute holder in builder, which is user for template attribute assignment.
- setAttributeMaterial(int) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAttributeMaterial(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAttributeMaterial(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAttributeName(String) - Method in interface nxopen.annotations.TableColumnBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAttributeName(int) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAttributeName(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAttributeName(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setAttributeName(String) - Method in interface nxopen.routing.AttributeMembersBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setAttributeName(String) - Method in interface nxopen.routing.FindByAttributesBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setAttributeObjects(NXObject[]) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Sets the array of objects that have this attribute
License requirements: None.
- setAttributeObjects(NXObject[]) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
Sets the array of objects that have this attribute
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setAttributeOfRootPart(boolean) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAttributeOrigin(ExportWeldBuilder.AttributeOriginType) - Method in interface nxopen.weld.ExportWeldBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setAttributeOrigin(InformationBuilder.AttributeOriginType) - Method in interface nxopen.weld.InformationBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setAttributes(ElectricalPartBuilder.Attribute[]) - Method in interface nxopen.mechatronics.ElectricalPartBuilder
-
Set the attributes data.
- setAttributes() - Method in interface nxopen.routing.AttributeHolder
-
Sets the Template Attributes to this object
License requirements: routing_base ("Routing Basic")
.
- setAttributes(CharacteristicList) - Method in interface nxopen.routing.RunItem
-
Sets the attributes on the Run Item.
- setAttributesToObjects(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
-
- setAttributesToObjects(boolean, FeatureBuilder) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
-
- setAttributesToProxy(NXObject) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
-
Sets the attributes to proxy
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setAttributeTitle(String) - Method in interface nxopen.die.DieAttributesBuilder
-
License requirements: None.
- setAttributeTitle(String) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAttributeTitleName(String[]) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Sets the title name of Attribute Of Object Tree list
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAttributeTitles(String) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAttributeTitles(String) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAttributeToProxyFromBuilder(FeatureBuilder) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
-
Sets attribute proxy
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setAttributeType(SpecifyBaffleBuilder.AttributeTypes) - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setAttributeValue(String, double) - Method in interface nxopen.cam.fbm.Feature
-
Sets the attribute value
License requirements: cam_base ("CAM BASE")
.
- setAttributeValue(String, String) - Method in interface nxopen.cam.fbm.Feature
-
Sets the attribute value
License requirements: cam_base ("CAM BASE")
.
- setAttributeValue(String, int) - Method in interface nxopen.cam.fbm.Feature
-
Sets the attribute value
License requirements: cam_base ("CAM BASE")
.
- setAttributeValue(String, boolean) - Method in interface nxopen.cam.fbm.Feature
-
Sets the attribute value
License requirements: cam_base ("CAM BASE")
.
- setAttributeValue(String) - Method in interface nxopen.die.DieAttributesBuilder
-
License requirements: None.
- setAttributeValue(String) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAttributeValue(String) - Method in interface nxopen.routing.AttributeMembersBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setAttributeValue(String) - Method in interface nxopen.routing.FindByAttributesBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setAttributeValueForObjectFromReferenceObject(NXObject, RoutingAttributeIdentifierType, String) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The method that sets the attribute value from the reference object on the specifiec object
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setAttributeValues(NXObject[]) - Method in interface nxopen.annotations.PmiAttributeBuilder
-
Sets the attribute values
License requirements: None.
- setAttributeValues(NXObject[]) - Method in interface nxopen.display.CgfxMattexBuilder
-
- setAttributeValues(String) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAttributeValues(String) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAttributeValueText(String[]) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Sets the title name of Attribute Of Object Tree list
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAttrName(String) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAttrType(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAuthor(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setAuthor(String) - Method in interface nxopen.Step203Creator
-
- setAuthor(String) - Method in interface nxopen.Step214Creator
-
- setAuthor(String) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setAuthorization(String) - Method in interface nxopen.Step203Creator
-
- setAuthorization(String) - Method in interface nxopen.Step214Creator
-
- setAuthorization(String) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setAutoAddNewComps(Tag, boolean) - Method in interface nxopen.uf.UFAssem
-
- setAutoBlank(Tag, UFCam.BlankGeomType, double[]) - Method in interface nxopen.uf.UFCam
-
- setAutoBlockOffsetNegativeX(double) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setAutoBlockOffsetNegativeY(double) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setAutoBlockOffsetNegativeZ(double) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setAutoBlockOffsetPositiveX(double) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setAutoBlockOffsetPositiveY(double) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setAutoBlockOffsetPositiveZ(double) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setAutoBulkHeadName(String) - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAutoCADRevision(DxfdwgCreator.AutoCADRevisionOptions) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setAutoCentroid(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.
- setAutoChainOption(boolean) - Method in interface nxopen.cae.Mesh1dBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAutoCloseOption(boolean) - Method in interface nxopen.routing.HandrailBuilder
-
License requirements: routing_platform ("Routing Platform")
.
- setAutoConnection(boolean) - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAutoDatum(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAutoDeckName(String) - Method in interface nxopen.features.shipdesign.DecksBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAutoDimensionsToArcCenter(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not auto-dimensions are created to arc centers.
- setAutoDisplayResults(ValidatorOptions.ResultsDisplayModeTypes) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setAutofillAssemblyComponent(FEModelOccurrence) - Method in interface nxopen.cae.SimLoadRecipe
-
Set the assembly component on which the autofill method operates on.
- setAutoFit(boolean) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setAutoGenIdeal(boolean) - Method in interface nxopen.cae.FemCreationOptions
-
- setAutoGlobalMaxPenetrationFlag(int) - Method in interface nxopen.motion.BodyContactRecurdyn
-
License requirements: mechanisms ("MECHANISMS")
.
- setAutoInferWall(boolean) - Method in interface nxopen.features.BlendPocketBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAutoLevel(boolean) - Method in interface nxopen.cae.xyplot.ColorScaleStyle
-
License requirements: None.
- setAutoLocalMaxPenetrationFlag(int) - Method in interface nxopen.motion.BodyContactRecurdyn
-
License requirements: mechanisms ("MECHANISMS")
.
- setAutolockStatus(boolean) - Method in interface nxopen.uf.UFUgmgr
-
- setAutolowLod(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setAutomatic(boolean) - Method in interface nxopen.annotations.DrawingFormatTitleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAutomatic(boolean) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setAutomatic(boolean) - Method in interface nxopen.positioning.Constraint
-
Sets the flag marking the constraint as an "automatic" constraint.
- setAutomaticallyCheckItemRevisions(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the automatically checking of items revision flag for I-DEAS import
License requirements: None.
- setAutomaticallyExcludeText(boolean) - Method in interface nxopen.annotations.HatchBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAutomaticallySetMachingData(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setAutomaticallyStartInsert2DComponentCommand(boolean) - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAutomaticallyStartModelingApplication(boolean) - Method in interface nxopen.layout2d.AssemblyCreationSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAutomaticAnchorPoint(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the status of Automatic Anchor Point.
- setAutomaticAnchorPoint(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAutomaticAnchorPoint(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of Automatic anchor point
License requirements: drafting ("DRAFTING")
.
- setAutomaticAuxiliaryFloor(boolean) - Method in interface nxopen.cam.SurfaceContourBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAutomaticAuxiliaryFloorDistance(double) - Method in interface nxopen.cam.SurfaceContourBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAutomaticConstraintDirection(GeometricConstraintData.ParameterDirection) - Method in interface nxopen.features.GeometricConstraintData
-
License requirements: None.
- setAutomaticConstraintType(GeometricConstraintData.AutoConstraintType) - Method in interface nxopen.features.GeometricConstraintData
-
License requirements: None.
- setAutomaticCreationIntersectionSymbol(boolean) - Method in interface nxopen.annotations.DimensionWorkflowBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAutomaticCustomSymbolUpdate(boolean) - Method in interface nxopen.preferences.SessionDrafting
-
License requirements: None.
- setAutomaticDimensionColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch automatic dimension color
License requirements: None.
- setAutomaticDisplayOption(boolean) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAutomaticFitToggle(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAutomaticFrozenOption(TBSTopologyControllerOptimizationParameters.AutoFrozen) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setAutomaticMode(boolean) - Method in interface nxopen.cae.DestinationCollectorBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAutomaticOption(TurnEngageRetractBuilder.AutoOptions) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAutomaticPartBoundaryMethod(PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes) - Method in interface nxopen.cam.PlanarOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAutomaticPreview(Layout2dDefinitionLocation, String, boolean) - Method in interface nxopen.layout2d.ComponentDefinitionCollection
-
Sets the automatic preview mode of definition with the given path
License requirements: nx_layout ("NX Layout")
.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SelectElement
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SelectNode
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyLocation
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyPlane
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setAutomaticProgression(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setAutomaticRouteLevel(boolean) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the level at which to automatically route a path.
- setAutomaticRule(CorrelModePairingBuilder.Auto) - Method in interface nxopen.cae.CorrelModePairingBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setAutomaticUpdate(boolean) - Method in interface nxopen.annotations.BendTableSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAutomaticUpdate(boolean) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setAutomaticUpdate(boolean) - Method in interface nxopen.annotations.TabularNoteStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAutomaticUpdate(boolean) - Method in interface nxopen.annotations.TitleBlockPreferences
-
License requirements: drafting ("DRAFTING")
.
- setAutomaticUpdate(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the status of Automatic update, if true then position,
hidden lines, silhouettes, view bounds, section views, and
section view details updated after a model change else
the above items are not updated after a model change.
- setAutomaticUpdate(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAutomaticUpdate(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setAutomaticUpdate(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of Automatic Update. if true, then position,
hidden lines, silhouettes, view bounds, section views and
section view details are updated after a model change else
above items are not updated after a model change.
- setAutoNameToggle(boolean) - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAutoNameToggle(boolean) - Method in interface nxopen.features.shipdesign.DecksBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setAutoNormalGen(boolean) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setAutoOrderGrid(boolean) - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour
-
License requirements: None.
- setAutopairs(AutoPairs) - Method in interface nxopen.cae.AutoBCBuilder
-
License requirements: None.
- setAutoplaced(boolean) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAutoplaced(boolean) - Method in interface nxopen.annotations.RadialDimensionBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAutoPopulateSideTwoOption(boolean) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAutoPosition(boolean) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setAutoPositionOption(boolean) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAutoRemoveToggle(boolean) - Method in interface nxopen.cae.MergeFaceBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAutoRenameOnMapping(boolean) - Method in interface nxopen.ame.AspectPrefixBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAutoResetOption(boolean) - Method in interface nxopen.cae.Mesh2dBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAutoResetOption(boolean) - Method in interface nxopen.cae.Mesh3dHybridBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic")
.
- setAutoResetOption(boolean) - Method in interface nxopen.cae.Mesh3dTetBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAutoReverseDuringDrag(boolean) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setAutoRoutePlugin(CustomManager.AutoroutePlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will instead of the internal automatic routing of
connections along a path.
- setAutoRouteStockStyle(StockStyle) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the option to Auto Route using centerline stock style (i.e. none) or simple stock style.
- setAutoSave(boolean) - Method in interface nxopen.cam.CleanupSettings
-
License requirements: cam_base ("CAM BASE")
.
- setAutoSaveBoundary(boolean) - Method in interface nxopen.cam.OutputUncutRegions
-
License requirements: cam_base ("CAM BASE")
.
- setAutoscale(boolean) - Method in interface nxopen.drawings.StandardViewsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setAutoScale(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setAutoScale(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setAutoSelectBoundary(boolean) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Sets the value that whether the boundary body is automatically got or not
License requirements: ug_mold_design ("UG MOLD")
.
- setAutoSelectHoleByType(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setAutoSizeOption(boolean) - Method in interface nxopen.cae.Mesh3dTetBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAutoStartBaseView(boolean) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
- setAutoStartViewCreation(boolean) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: None.
- setAutoTarget(boolean) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
License requirements: None.
- setAutoTextCount(boolean) - Method in interface nxopen.cae.xyplot.VectorStyle2DSetting
-
License requirements: None.
- setAutoTextIsland(boolean) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setAutoToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAutoUpdate(boolean) - Method in interface nxopen.annotations.CutSheetBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setAutoUpdate(boolean) - Method in interface nxopen.annotations.PinListBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setAutoUpdate(Tag) - Method in interface nxopen.uf.UFDraw
-
- setAutoWallSelection(boolean) - Method in interface nxopen.cam.GeometryCiBuilder
-
License requirements: None.
- setAutoWeldSymbol(boolean) - Method in interface nxopen.annotations.LineWeld
-
Sets the auto weld symbol flag.
- setAuxFloor(boolean) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAuxiliaryFloorColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setAuxiliaryFloorColorSelection(Preferences.AuxiliaryFloorColorSelectionTypes) - Method in interface nxopen.cam.Preferences
-
- setAuxiliaryProducts(ProductDefinition[]) - Method in interface nxopen.ame.ProductSelectionBuilder
-
Set auxiliary product details
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setAvailableFontTypesAsString(String) - Method in interface nxopen.blockstyler.TextColorFontWidth
-
License requirements: None.
- setAvailableItems(String[], MATLABClientBuilder.DataType[]) - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
Set the available MATLAB items.
- setAvailableItems(String[], OPCClientBuilder.TagDataType[]) - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Set the available OPC items.
- setAvailableMaterial(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
License requirements: None.
- setAvailableOptions(int) - Method in interface nxopen.blockstyler.LineFont
-
License requirements: None.
- setAvailFilterToggle(boolean) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAvailStateEnum(InspectionConstructedFeatureBuilder.AvailableStateType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAveragingCriteria(Result.Averaging) - Method in interface nxopen.cae.ResultParameters
-
Set averaging criteria
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setAvoidanceAfterLastRetract(boolean) - Method in interface nxopen.cam.NcmTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAvoidanceBetweenRegions(boolean) - Method in interface nxopen.cam.NcmTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAvoidanceForAutomaticEngage(boolean) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAvoidanceForAutomaticRetract(boolean) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAvoidanceForMinimumClearance(boolean) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAvoidanceMethod(ToolPathTiltAvoidance.MethodType) - Method in interface nxopen.cam.ToolPathTiltAvoidance
-
License requirements: None.
- setAvoidanceToStartOfEngage(boolean) - Method in interface nxopen.cam.NcmTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAvoidUsedNXLayers(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setAxial(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setAxialDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setAxialOffsetDirection(Direction) - Method in interface nxopen.features.OffsetCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setAxialPercent(double) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxialPlaneMode(TurnAvoidanceClearanceBuilder.AxialPlaneModes) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxialPlaneMode(TurnProbeClearanceBuilder.AxialPlaneModes) - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxialPlanePoint(Point) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxialPlanePoint(Point) - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxialPlaneValue(double) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxialPlaneValue(double) - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxialSafeClearance(double) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxialSafeClearance(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxiOptions(AxiSymmetricParameters.Options) - Method in interface nxopen.cae.AxiSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setAxis(BaseFrameBarBuilder.AxisType) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setAxis(String) - Method in interface nxopen.cae.connections.ConnectionData
-
Sets axis.
- setAxis(Axis) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAxis(Axis) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAxis(Axis) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAxis(Axis) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAxis(Axis) - Method in interface nxopen.cae.NodeRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setAxis(TBSTopologyLinkCondition.AxisType) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setAxis(NXObject) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxis(NXObject) - Method in interface nxopen.cam.NcmClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxis(NXObject) - Method in interface nxopen.cam.ProbeTrackingBuilder
-
License requirements: None.
- setAxis(NXObject) - Method in interface nxopen.cam.WedmPointDefinitionBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxis(Axis) - Method in interface nxopen.drawings.ViewProjectionPlaneBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setAxis(Axis) - Method in interface nxopen.features.ConeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAxis(Axis) - Method in interface nxopen.features.CylinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAxis(Axis) - Method in interface nxopen.features.MoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAxis(Axis) - Method in interface nxopen.features.PatternFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAxis(Axis) - Method in interface nxopen.features.RevolveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setAxis(Axis) - Method in interface nxopen.routing.IAxisPort
-
Sets the axis that defines the port
License requirements: routing_base ("Routing Basic")
.
- setAxis1(Vector3d) - Method in interface nxopen.tooldesigner.ReusePieChartBuilder
-
Set axis1
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setAxis2(Vector3d) - Method in interface nxopen.tooldesigner.ReusePieChartBuilder
-
Set axis2
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setAxisAllowReversal(UFVariant, String, boolean) - Method in interface nxopen.uf.UFSim
-
- setAxisColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setAxisDirectionI(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisDirectionI(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisDirectionI(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisDirectionJ(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisDirectionJ(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisDirectionJ(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisDirectionK(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisDirectionK(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisDirectionK(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisDirectionSearchMethod(DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setAxisExtrapolation(InspectionMethodBuilder.AxisExtrapolationTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisExtrapolationMode(InspectionMethodBuilder.AxisExtrapolationTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisJoint(NXObject) - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Sets the joint.
- setAxisJoint(NXObject) - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Sets the joint.
- setAxisLabel(String) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Sets the customized axis label
License requirements: None.
- setAxisLabel(String) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Sets the customized axis label
License requirements: None.
- setAxisOfRotation(MultiBladeGeomBuilder.PartAxisOfRotationTypes) - Method in interface nxopen.cam.MultiBladeGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxisOfRotation(PartAxisBuilder.PartAxisOfRotationTypes) - Method in interface nxopen.cam.PartAxisBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxisOfRotation(RotaryFinishGeomBuilder.PartAxisOfRotationTypes) - Method in interface nxopen.cam.RotaryFinishGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxisOption(WedmPointDefinitionBuilder.WireAxisStates) - Method in interface nxopen.cam.WedmPointDefinitionBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setAxisOption(OrientXpressBuilder.Axis) - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisOrientation(AxisOrientation) - Method in interface nxopen.SketchInPlaceBuilder
-
License requirements: None.
- setAxisOrientationInfer(AxisOrientation) - Method in interface nxopen.SketchInPlaceBuilder
-
License requirements: None.
- setAxisPoint(Point) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setAxisPropertyValue(String, Axis) - Method in interface nxopen.cae.PropertyTable
-
Sets the axis
Axis
License requirements: None.
- setAxisReference(Direction) - Method in interface nxopen.SketchInPlaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
- setAxisReversed(boolean) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setAxisRotaryDirMode(UFVariant, String, UFSim.AxisRotDirType) - Method in interface nxopen.uf.UFSim
-
- setAxissearch(DurabilityAxisSearch) - Method in interface nxopen.cae.DurabilityEventBuilder
-
The stress axes stored inside the event.
- setAxisType(AxisType) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
License requirements: None.
- setAxisType(ForceTorqueControlBuilder.AxisJointType) - Method in interface nxopen.mechatronics.ForceTorqueControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisType(GearBuilder.AxisJointType) - Method in interface nxopen.mechatronics.GearBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisType(PositionControlBuilder.Axis) - Method in interface nxopen.mechatronics.PositionControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisType(PositionSensorBuilder.AxisJointType) - Method in interface nxopen.mechatronics.PositionSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisType(SpeedControlBuilder.AxisJointType) - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisType(SpringDamperBuilder.AxisJointType) - Method in interface nxopen.mechatronics.SpringDamperBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisType(ThreeJointCouplerBuilder.AxisJointType) - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisType(VelocitySensorBuilder.AxisJointType) - Method in interface nxopen.mechatronics.VelocitySensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisType(VirtualAxisBuilder.VirtualAxisType) - Method in interface nxopen.mechatronics.VirtualAxisBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisType(JointDefine.UniversalJointAxisType) - Method in interface nxopen.motion.JointDefine
-
Sets the axis type.
- setAxisTypeEnum(FlipComponentBuilder.AxisType) - Method in interface nxopen.formboard.FlipComponentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setAxisVector(Direction) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisVector(Direction) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setAxisVector(Direction) - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setAxisVector(Direction) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setAxisVector(Direction) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisVector(Direction) - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisVector(Direction) - Method in interface nxopen.mechatronics.HingeJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisVector(Direction) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisVector(Direction) - Method in interface nxopen.mechatronics.PlanarJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisVector(Direction) - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisVector(Direction) - Method in interface nxopen.mechatronics.ScrewJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisVector(Direction) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setAxisVector(Direction) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setAxiSymmetricParameters(AxiSymmetricParameters) - Method in interface nxopen.cae.ResultParameters
-
Set Axi Symmetric Parameters type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setB(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setB(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setback() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the set back options.
- setBackAngle(double) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
- setBackAngleA40(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setBackAngleDbl(double) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBackAngleFixed(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBackAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Sets the back faces attributes
License requirements: ug_die_design ("Die Design")
.
- setBackburnDistance(double) - Method in interface nxopen.cam.WedmIntGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBackburnFlag(int) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBackburnFlag(int) - Method in interface nxopen.cam.WedmIntGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBackburnFlag(int) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBackburnPasses(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBackburnPasses(WedmGeomBuilder.BackburnPassesTypes) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBackburnPasses(WedmOperationBuilder.BackburnPassesTypes) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBackClip(boolean) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBackClipDistance(double) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBackClipping(boolean) - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Sets the status of back clipping
License requirements: drafting ("DRAFTING")
.
- setBackClippingDistance(double) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setBackClippingDistance(double) - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Sets the value of back clipping distance
License requirements: drafting ("DRAFTING")
.
- SetbackData() - Constructor for class nxopen.features.EdgeBlendBuilder.SetbackData
-
- setbackData - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- setBackDistance(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the back distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- setBackDistance(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Sets the back distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setBackEdgeOffset(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setBackground(boolean) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets the status of background.
- setBackground(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBackground(boolean) - Method in interface nxopen.preferences.SectionViewPreferences
-
Sets the status of background.
- setBackground(DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Sets visibility of background objects.
- setBackgroundCategory(Background.CategoryType) - Method in interface nxopen.display.Background
-
License requirements: None.
- setBackgroundColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
License requirements: None.
- setBackgroundColor(NXColor) - Method in interface nxopen.cae.xyplot.LegendTableStyle
-
License requirements: None.
- setBackgroundColor(double[]) - Method in interface nxopen.display.ImageBaseBuilder
-
Sets the background color (RGB value) of the image.
- setBackgroundOption(SessionSketch.BackgroundType) - Method in interface nxopen.preferences.SessionSketch
-
Sets the background option
License requirements: None.
- setBackgroundType(Background.Type) - Method in interface nxopen.display.Background
-
License requirements: None.
- setbackMethod() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
Returns the setback method.
- setbackOption() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the setback option for edge blend
License requirements: None.
- setbackPoint() - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
Returns the setback point for u/v direction.
- setBackProximity(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBackReliefToggle(int) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the back relief toggle
License requirements: ug_die_design ("Die Design")
.
- setBackShape(ISurface[]) - Method in interface nxopen.die.SteelInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBackSideReliefDistance(String) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBackView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBackwardExtension(Expression) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setBackwardExtension(double) - Method in interface nxopen.routing.Port
-
License requirements: routing_base ("Routing Basic")
.
- setBackwardExtensionObject(Expression) - Method in interface nxopen.routing.Port
-
License requirements: routing_base ("Routing Basic")
.
- setBalanced(boolean) - Method in interface nxopen.tooling.MoldFillingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setBalanceType(HumanData.InverseKinematicsBalanceType) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setBalCavityNumber(LayoutBuilder.BalNumber) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setBalloonText(String) - Method in interface nxopen.annotations.BalloonNoteBuilder
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.Button
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.Label
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.ObjectColorPicker
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.RGBColorPicker
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyPlane
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setBalloonTooltipImage(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setBalloonTooltipImages(String[]) - Method in interface nxopen.blockstyler.Enumeration
-
Sets the BalloonTooltipImages
License requirements: None.
- setBalloonTooltipImages(String[]) - Method in interface nxopen.blockstyler.StringBlock
-
Sets the BalloonTooltipImages
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.Button
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.Label
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.ObjectColorPicker
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.RGBColorPicker
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyAxis
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyPlane
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setBalloonTooltipLayoutAsString(String) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setBalloonTooltipOffImage(String) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setBalloonTooltipOffText(String) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setBalloonTooltipOnImage(String) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setBalloonTooltipOnText(String) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setBalloonTooltipPointImage(String) - Method in interface nxopen.blockstyler.SpecifyAxis
-
License requirements: None.
- setBalloonTooltipPointText(String) - Method in interface nxopen.blockstyler.SpecifyAxis
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.Button
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.Label
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.ObjectColorPicker
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.RGBColorPicker
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyPlane
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setBalloonTooltipText(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setBalloonTooltipTexts(String[]) - Method in interface nxopen.blockstyler.Enumeration
-
Sets the BalloonTooltipTexts
License requirements: None.
- setBalloonTooltipTexts(String[]) - Method in interface nxopen.blockstyler.StringBlock
-
Sets the BalloonTooltipTexts
License requirements: None.
- setBalloonTooltipVectorImage(String) - Method in interface nxopen.blockstyler.SpecifyAxis
-
License requirements: None.
- setBalloonTooltipVectorText(String) - Method in interface nxopen.blockstyler.SpecifyAxis
-
License requirements: None.
- setBankAngleCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBankAngleCurve(MotionFunction) - Method in interface nxopen.motion.SegmentBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBannerMessage(String) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setBarLowerLimit(boolean) - Method in interface nxopen.cae.xyplot.AxisYStyleSetting
-
License requirements: None.
- setBarrierCsys(CoordinateSystem) - Method in interface nxopen.features.HumanBuilder
-
Sets barrier csys for active reach, the human will be hold by the position and orientaion of the csys in
active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setBarrierNormal(Vector3d) - Method in interface nxopen.features.HumanBuilder
-
Sets barrier normal direction for active reach, the human will be hold by the position of point
and orientaion of the barrier normal in active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setBarrierPoint(Point) - Method in interface nxopen.features.HumanBuilder
-
Sets barrier point active reach, the human will be hold by the position of point in active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setBase(NXObject) - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
Sets the base.
- setBaseAnchorPoint(Point) - Method in interface nxopen.mechatronics.ChainJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBaseAnchorPoint(Point) - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBaseAttributes(String, String, int) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Sets the base faces attributes.
- setBaseAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Sets the base faces attributes
License requirements: ug_die_design ("Die Design")
.
- setBaseAxisVector(Direction) - Method in interface nxopen.mechatronics.ChainJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBaseAxisVector(Direction) - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBaseBody(Body) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBaseBody(Body) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBaseCsys(CoordinateSystem) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBaseDataSourceMethod(BaseDataSourceBuilder.BaseDataSourceOption) - Method in interface nxopen.features.vehicledesign.BaseDataSourceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBasedefinition(NXObject) - Method in interface nxopen.ame.BaseDefinitionAttributeHolder
-
Set BaseDefinition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setBaseEdges(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setBaseEnableMaxFacetSize(boolean) - Method in interface nxopen.motion.BodyContactLms
-
License requirements: mechanisms ("MECHANISMS")
.
- setBaseEnd(Point) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBaseFace(Face) - Method in interface nxopen.features.sheetmetal.AeroUnformBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setBaseFace(Face) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Sets the base face from which the thickness of the part is determined.
- setBaseFaceForSection(ScCollector) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Set base face for section
License requirements: None.
- setBaseFactor(int) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setBaseFlange(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder
-
Sets the base flange profile of the draw die punch.
- setBaseInstance(int, int) - Method in interface nxopen.geometricutilities.ReferencePattern
-
Set the base instance
License requirements: None.
- setBaseline(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineDirectionReversed(boolean) - Method in interface nxopen.annotations.OrdinateBaselineBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setBaselineForComparison(DrawingCompareSettingsBuilder.ComparisonBaseline) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setBaselineLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineOfComparison(TrackDrawingChangesGeneralBuilder.BaselineOfComparisonType) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBaselineOffset(double) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the offset between dimension lines of baseline dimensions
License requirements: None.
- setBaselineOffset(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setBaselineTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBaselineVector(Direction) - Method in interface nxopen.annotations.OrdinateBaselineBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setBaseordrawingView(DrawingSheetBuilder.SheetBaseordrawingView) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBaseOrientation(DrawBeadBuilder.OrientationTypes) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBaseOrientation(ISurface) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the base orientation of the draw die punch casting.
- setBaseOrientation(ISurface) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the base orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.
- setBasePanelType(GapFlushnessBuilder.PanelTypes) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBasePlane(DatumPlane) - Method in interface nxopen.display.PlanarShipGridBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setBasePlane(ISurface) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBasePlane(Plane) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBasePlane(Plane) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBasePlane(Plane) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBasePlane(Plane) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBasePlane(Plane) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBasePoint(Point) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBasePoint(Point) - Method in interface nxopen.mechatronics.LinearLimitJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBasePoint(Point) - Method in interface nxopen.mechatronics.LinearSpringJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBasePoint(Point) - Method in interface nxopen.motion.BeamForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBasePoint(Point) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBasePoint(Point) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setBasePointChoice(ImageBaseBuilder.BasePointChoices) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setBasePointX(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setBasePointX(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setBasePointY(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setBasePointY(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setBasePointZ(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setBasePointZ(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setBaseScalarFieldPropertyValue(String, FieldExpression) - Method in interface nxopen.BasePropertyTable
-
Sets the field expression
FieldExpression
value of the property
License requirements: None.
- setBaseScalarWithDataPropertyValue(String, double, Unit) - Method in interface nxopen.BasePropertyTable
-
Sets the the Scalar property as a constant double value with units.
- setBaseScalarWithDataPropertyValue(String, String, Unit) - Method in interface nxopen.BasePropertyTable
-
Sets the the Scalar property as a string value with units.
- setBaseSheet(Body) - Method in interface nxopen.features.GlobalShapingBuilder
-
Base sheet
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBaseString(String) - Method in interface nxopen.InterpartExpressionsBuilder
-
License requirements: None.
- setBaseStyleEnum(ColumnFeatureBuilder.ColumnBaseType) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Sets the base cross section type of column feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setBaseSurface(Body) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBaseTessellationFile(String) - Method in interface nxopen.motion.BodyContactLms
-
License requirements: mechanisms ("MECHANISMS")
.
- setBaseThickness(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBaseThickness(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBaseThickness(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBaseUseTessellationFile(boolean) - Method in interface nxopen.motion.BodyContactLms
-
License requirements: mechanisms ("MECHANISMS")
.
- setBaseVector(Direction) - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBaseVector(Direction) - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBaseView(String) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBaseViewOfViewSet(Tag, UFView.StandardOrientation) - Method in interface nxopen.uf.UFView
-
- setBaseWidth(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBaseWidth(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBasicColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setBasicDesignFeature(Feature) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBasicDesignMode(boolean) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setBboxPoint(Point) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setBcBaseName(String) - Method in interface nxopen.cae.AutoBCBuilder
-
Sets the base name of
SimBC
objects created
License requirements: None.
- setBcLabel(int) - Method in interface nxopen.cae.SimBCBuilder
-
Sets the label of
SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.5.0
- setBcName(String) - Method in interface nxopen.cae.SimBCBuilder
-
Sets the name of
SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- setBcsToPlot(SimBC[]) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
Sets
SimBC
objects to plot.
- setBcsToPlot(SimBC[], String[]) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
Sets
SimBC
objects and property names to plot .
- setBcsToPlot(SimBC[], String[]) - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
Sets
SimBC
objects to plot.
- setBcsToPlot(SimBC[]) - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
Sets
SimBC
objects to plot.
- setBcTags(SimBC[]) - Method in interface nxopen.cae.BcLabelManagerBuilder
-
Sets tags of BC to renumber
License requirements: None.
- setBcurveTol(double) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setBeadLocation(WeldBeadBuilder.BeadLocationMethod) - Method in interface nxopen.weld.WeldBeadBuilder
-
License requirements: ugweld ("UG WELD")
.
- setBeamAftSection(BeamSection) - Method in interface nxopen.cae.BeamSectionOptions
-
Sets the section of aft beam end
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBeamCrossDamping(boolean) - Method in interface nxopen.motion.BeamForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBeamCrossDamping(boolean) - Method in interface nxopen.motion.SplineBeamPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBeamData(FEElement, PhysicalPropertyTable, CaeElementAssociatedDataUtilsOrientationMethod, CaeElementAssociatedDataUtilsVectorChoiceType, Direction, FENode, CaeElementAssociatedDataUtilsEndReleaseState, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseState, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, CaeElementAssociatedDataUtilsEndReleaseSetting, double, double, double, double, double, double) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets beam element associated data.
- setBeamDataLocation(ElementalFunctionEvalBeamLocation) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setBeamDataLocation(NodalFunctionEvalBeamLocation) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setBeamElement(int) - Method in interface nxopen.cae.CrossSectionParameters
-
Set beam element ID
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setBeamEnd(Result.BeamEnd) - Method in interface nxopen.cae.CrossSectionParameters
-
Set beam end
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setBeamFilletRadius(double) - Method in interface nxopen.cae.ResultMeasureResultAllOptions
-
Set the beam fillet radius if adding beam fillets for calculation of beam results only
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBeamFilletRadius(double) - Method in interface nxopen.cae.ResultParameters
-
Sets the fillet radius as a fraction of the adjacent dimensions
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setBeamFillets(boolean) - Method in interface nxopen.cae.ResultParameters
-
Sets the fillets flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setBeamForeSection(BeamSection) - Method in interface nxopen.cae.BeamSectionOptions
-
Sets the section of fore beam end
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBeamLocation(DataLocation.Beam) - Method in interface nxopen.cae.responsesimulation.DataLocation
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setBeamResultsInLocalCoordinateSystem(boolean) - Method in interface nxopen.cae.ResultParameters
-
Presents beam results in local coordinate system (if flag is true)
or in the same coordinate system as the rest of the model
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setBeamSect(Result.Section) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBeamSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultAllOptions
-
Set the beam section for beam stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBeamSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultDirectionSectionOptions
-
Set the beam section for beam stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBeamSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultSectionOptions
-
Set the beam section for beam stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBeamSectionTapered(boolean) - Method in interface nxopen.cae.BeamSectionOptions
-
Sets the flag indicating whether the beam section is tapered
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBeamSectionTaperedChaining(boolean) - Method in interface nxopen.cae.BeamSectionOptions
-
Sets the flag indicating whether the beam section is in tapered chaining
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBeamStress(DurabilityStressAxesBuilder.BeamStressEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setBefore(String[]) - Method in interface nxopen.annotations.AppendedTextBuilder
-
Sets the appended text before the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setBeforeText(String[]) - Method in interface nxopen.annotations.AppendedText
-
Sets the appended text before the annotation
License requirements: None.
- setBeforeText(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setBeforeTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setBelow(String[]) - Method in interface nxopen.annotations.AppendedTextBuilder
-
Sets the appended text below the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setBelowText(String[]) - Method in interface nxopen.annotations.AppendedText
-
Sets the appended text below the annotation
License requirements: None.
- setBelowText(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setBelowTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setBeltAlignment(ProfileBuilder.Alignment) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setBeltRouting(SeatBeltAnchorageBuilder.RoutingTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBeltSize(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setBeltThickness(String) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBeltThickness(String) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBeltThickness(String) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBeltThickness(String) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBeltThickness(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBeltThickness(double) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBeltType(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setBeltWallAttributes(String, String, int) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Sets the belt wall faces attributes.
- setBendAllowanceFormula(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the bend allowance formula
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendAndEndSegmentWidthFactor(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBendAngle(String) - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Sets the Bend Angle
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendAngle(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
- setBendAngle(double) - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setBendAngle1(double) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendAngle1(double) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBendAngle2(double) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendAngle2(double) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBendAngle3(double) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendAngle3(double) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBendAngle4(double) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendAngle4(double) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBendAngle5(double) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendAngle5(double) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBendAngle6(double) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBendAngleDirection(FlexibleCableBuilder.BendAngleDirectionOptions) - Method in interface nxopen.features.sheetmetal.FlexibleCableSegment
-
Sets the bend angle direction.
- setBendClosureType(EditCornerBuilder.BendClosureTypeOptions) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendCornerAttributes(CharacteristicList) - Method in interface nxopen.routing.AssignCornerBuilder
-
Corner Attributes
License requirements: routing_base ("Routing Basic")
.
- setBendDeductionFormula(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendDefinitionMethodOption(boolean, PartSheetmetal.BendDefinitionMethodOptions) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the bend definition method
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendDevelopedLength(double) - Method in interface nxopen.tooling.DefineNeutralFactorBuilder
-
License requirements: None.
- setBendDevLength(double) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendDevLength(double) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBendDown(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendFace(Face) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendFaces(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setBendID(int) - Method in interface nxopen.features.sheetmetal.BendListItemBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendingColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setBendingDirection(BendInsertDesignBuilder.BendingDirectionOption) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendlines(boolean) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets the status of bendlines
License requirements: drafting ("DRAFTING")
.
- setBendlines(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBendlines(boolean) - Method in interface nxopen.preferences.SectionViewPreferences
-
Sets the status of bendlines
License requirements: drafting ("DRAFTING")
.
- setBendLocation(Point) - Method in interface nxopen.drawings.HalfSectionLineBuilder
-
- setBendLocation(BendBuilder.BendLocationOptions) - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Sets the Bend Location (Material Side)
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendLocation(JogBuilder.BendLocationOptions) - Method in interface nxopen.features.sheetmetal.JogBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendMethod(CornerTypeBuilder.BendMethods) - Method in interface nxopen.routing.BendCorner
-
Sets the bend method
License requirements: routing_base ("Routing Basic")
.
- setBendMoment(boolean) - Method in interface nxopen.motion.JointFrictionAdams
-
Sets the bend moment
License requirements: mechanisms ("MECHANISMS")
.
- setBendMoment(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the bend moment
License requirements: mechanisms ("MECHANISMS")
.
- setBendName(String) - Method in interface nxopen.features.sheetmetal.BendListItemBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendNeutralFactor(double) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendNeutralFactor(double) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBendNumPrebends(BendOperationBuilder.Prebend) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendNumPrebends(DirectUnfoldBuilder.Bend) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setBendPoints(Point2d[]) - Method in interface nxopen.diagramming.ConnectionBuilder
-
Set bending points for polyline to render the connection.
- setBendPoints(Point2d[]) - Method in interface nxopen.diagramming.LeaderLineBuilder
-
Set bending points for polyline to render the leader line.
- setBendPoints(Point2d[]) - Method in interface nxopen.pid.PipeBuilder
-
Set bending points for polyline to render the connection.
- setBendRadius(String) - Method in interface nxopen.features.sheetmetal.BendOptions
-
- setBendRadius(String) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendRadius(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the bend radius value
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setBendRadius(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
The bend radius value
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendRadius(double) - Method in interface nxopen.preferences.RoutingPath
-
Needs a work part and a loaded applicaiton view.
- setBendRadius(double) - Method in interface nxopen.routing.BendCorner
-
Sets the bend radius of the corner.
- setBendRadius(double) - Method in interface nxopen.routing.MiteredBendCorner
-
Sets the bend radius of the corner.
- setBendRadius(double) - Method in interface nxopen.routing.OffsetPath
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setBendRadiusMethod(RoutingPath.RadiusMethod) - Method in interface nxopen.preferences.RoutingPath
-
Set whether the default corner should use bend ratio.
- setBendRadiusUnits(RoutingPath.RadiusUnits) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setBendRatio(double) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setBendRatio(double) - Method in interface nxopen.routing.BendCorner
-
Sets the bend ratio to apply when computing the bend radius
License requirements: routing_base ("Routing Basic")
.
- setBendRatio(double) - Method in interface nxopen.routing.OffsetPath
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setBendReliefDepth(String) - Method in interface nxopen.features.sheetmetal.BendOptions
-
- setBendReliefDepth(String) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
- setBendReliefDepth(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the bend relief depth value
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setBendReliefDepth(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
THE bend relief depth value
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendReliefType(BendOptions.BendReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the bend relief type.
- setBendReliefType(ConvertToSheetmetalBuilder.BendReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Sets the bend relief type.
- setBendReliefType(HemFlangeBuilder.BendReliefOptions) - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendReliefType(ResizeBendRadiusBuilder.BendReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendReliefWidth(String) - Method in interface nxopen.features.sheetmetal.BendOptions
-
- setBendReliefWidth(String) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
- setBendReliefWidth(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the bend relief depth value
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setBendReliefWidth(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
THE bend relief depth value
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendTable(String) - Method in interface nxopen.mechanicalrouting.BendCornerTypeBuilder
-
Sets the name of bend radius table
License requirements: routing_base ("Routing Basic")
.
- setBendTable(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the bend table name
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBendTable(String) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setBendTangent(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendTaperInputMethod1(BendTaperBuilder.BendTaperInputMethod) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendTaperInputMethod2(BendTaperBuilder.BendTaperInputMethod) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendTaperType1(BendTaperBuilder.BendTaperType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendTaperType2(BendTaperBuilder.BendTaperType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBendType(BendInsertDesignBuilder.BendTypeOption) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBendType(UniversalUnformBuilder.BendTypes) - Method in interface nxopen.tooling.UniversalUnformBuilder
-
License requirements: None.
- setBendUp(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBezier(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setBgdBottomRgbcolorPicker(double[]) - Method in interface nxopen.display.TrueShadingBuilder
-
Sets the RGB values of background bottom color picker
License requirements: None.
- setBgdImageEnum(TrueShadingBuilder.BgdImageType) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setBgdImageFileBrowser(String) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setBgdTopRgbcolorPicker(double[]) - Method in interface nxopen.display.TrueShadingBuilder
-
Sets the RGB values of background top color picker
License requirements: None.
- setBgdTypeEnum(TrueShadingBuilder.BgdType) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setBiaxialityRatioHistory(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setBinderEdge(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder
-
Sets the binder edge profile of the upper draw die deck.
- setBinderEdgeOffset(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBinderLiftDistance(double) - Method in interface nxopen.presslinesimulation.CushionControlBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setBinderLiftDuration(double) - Method in interface nxopen.presslinesimulation.CushionControlBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setBinderPosition(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBinderRelief(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBitmap(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.Button
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.Label
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.SelectElement
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.SelectNode
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.uistyler.BitMap
-
Sets the bitmap filename.
- setBitmap(String) - Method in interface nxopen.uistyler.IntegerItem
-
Specifies a filename that contains a bitmap definition.
- setBitmap(String) - Method in interface nxopen.uistyler.LabelItem
-
Specifies a filename that contains a bitmap definition.
- setBitmap(String[]) - Method in interface nxopen.uistyler.OptionMenu
-
Set an array of bitmap filenames
License requirements: None.
- setBitmap(String) - Method in interface nxopen.uistyler.PushButton
-
Specifies a filename that contains a bitmap definition.
- setBitmap(String) - Method in interface nxopen.uistyler.RealItem
-
License requirements: None.
- setBitmap(String) - Method in interface nxopen.uistyler.StringItem
-
Specifies a filename that contains a bitmap definition.
- setBitmapName(String) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setBitmapName(String) - Method in interface nxopen.visualreporting.Property
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setBitmapName(String) - Method in interface nxopen.visualreporting.ResultCategory
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setBitmapName(String) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setBitmapNameOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setBitmapNameOfReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setBitmapNameOfReportingProperty(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setBitmapOnly(boolean) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setBitmaps(String[]) - Method in interface nxopen.blockstyler.Enumeration
-
Sets the Bitmaps
License requirements: None.
- setBitmaps(String[]) - Method in interface nxopen.uistyler.OptionToggle
-
Set bitmaps
License requirements: None.
- setBitOffset(int) - Method in interface nxopen.ame.PlcVendorSymbolBuilder
-
License requirements: None.
- setBits(String, int) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the bits value for the given property name.
- setBits(String, int) - Method in interface nxopen.PropertyContainer
-
Sets the bits value for the given property name.
- setBlackoutPointsColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBladeBlendColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setBladeCleanupPasses(boolean) - Method in interface nxopen.cam.BladeRough
-
License requirements: cam_base ("CAM BASE")
.
- setBladeColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setBladeEdgePoint(BladeEdge.EdgePointType) - Method in interface nxopen.cam.BladeEdge
-
License requirements: cam_base ("CAM BASE")
.
- setBlankArea(double) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setBlankBody(boolean) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBlankColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setBlankContourNoLevels(int) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBlankDefinitionType(GeometryGroup.BlankDefinitionTypes) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setBlankDiameter(CylinderMillingBuilder.BlankDiameterTypes) - Method in interface nxopen.cam.CylinderMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBlankDistance(double) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setBlankMatrix(Matrix3x3) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setBlankNameStr(String) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setBlankNumber(String) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setBlankOption(boolean) - Method in interface nxopen.features.DividefaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setBlankOptionType(LsdynaGeometryPreparationBuilder.BlankOption) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBlankOriginal(boolean) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBlankPart(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setBlankPartName(String) - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
The part name of electrode blank.
- setBlankPosition(BendInsertDesignBuilder.BlankPositions) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBlankPosition(FormingInsertBuilder.BlankPositions) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setBlankPositionType(LsdynaGeometryPreparationBuilder.BlankPosition) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBlankPositionValue(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBlankPrecisionValue(double) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBlankProfileOffset(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBlankSelection(Preferences.BlankSelectionTypes) - Method in interface nxopen.cam.Preferences
-
- setBlankSize(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setBlankSize(String) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBlankStatus(Tag, int) - Method in interface nxopen.uf.UFObj
-
- setBlankThickness(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets the blank thickness.
- setBlankThickness(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBlankType(BoundaryTurnBlank.Type) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setBlankType(FormingInsertBuilder.BlankTypes) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setBlBodySelectionToggle(boolean) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setBlendColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Sets the blend color
License requirements: None.
- setBlendCurveOption(BlendCurve3DBuilder.BlendCurveOptions) - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setBlendEnabled(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setBlendExtended(boolean) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setBlendFaceContinuity(EdgeBlendBuilder.FaceContinuity) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBlendFaces(NXObject[]) - Method in interface nxopen.cam.Splitter
-
Set the blend faces
License requirements: cam_base ("CAM BASE")
.
- setBlendFacesOption(AestheticFaceBlendBuilder.BlendFacesType) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setBlendingFunctionType(ScalingMethodBuilder.BlendingFunctionTypes) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBlendMiter(boolean) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBlendMiter(boolean) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setBlendMiter(boolean) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setBlendOption(AestheticFaceBlendBuilder.BlendType) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setBlendOrder(EdgeBlendBuilder.OrderOfBlending) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBlendRadius(double) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBlendRadius(double) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBlendRadius(double) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBlendType(FaceBlendBuilder.Type) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setBlendVirtualCurveOverlay(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setBlendWidthMethod(FaceBlendBuilder.WidthMethod) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBlindHole(int, boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the blind hole for the hole in the fastener assembly
License requirements: None.
- setBlindHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBlockOffset(double) - Method in interface nxopen.features.TabNoteCfgBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setBlockType(WorkpieceBuilder.WorkPieceType) - Method in interface nxopen.tooling.WorkpieceBuilder
-
License requirements: None.
- setBndAddPasses(int) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setBndCustomStart(DmBndBuilder.BndCustomStartTypes) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setBndCutPattern(DmBndBuilder.BndCutPatternTypes) - Method in interface nxopen.cam.DmBndBuilder
-
Sets the Cut Pattern
License requirements: None.
- setBndCutTraversal(DmBndBuilder.BndCutTraversalTypes) - Method in interface nxopen.cam.DmBndBuilder
-
Sets the Cut Traversal
License requirements: None.
- setBndPocketDir(DmBndBuilder.BndPocketDirTypes) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setBndProfilePass(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setBndProfilePassStock(double) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setBodies(CAEBody[]) - Method in interface nxopen.cae.AutoPairs
-
Set the list of
CAEBody
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.0
- setBodies(int[]) - Method in interface nxopen.features.CustomFeatureCreateFeatureGeometryEvent
-
Sets the Parasolid bodies of a custom feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBody(Body) - Method in interface nxopen.features.ShellBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBody(Body) - Method in interface nxopen.RegionPoint
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBodyBeingPainted(DisplayableObject) - Method in interface nxopen.facet.PaintBrushBuilder
-
Sets facet body being painted.
- setBodyCollector(ScCollector) - Method in interface nxopen.features.ScaleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBodyColor(NXColor) - Method in interface nxopen.tooling.EdgePatchBuilder
-
License requirements: None.
- setBodyColor(double, double, double) - Method in interface nxopen.tooling.EdgePatchBuilder
-
- setBodyColor(NXColor) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
License requirements: None.
- setBodyColor(NXColor) - Method in interface nxopen.tooling.TrimRegionBuilder
-
License requirements: None.
- setBodyDensity(Tag, UFModl.DensityUnits, double) - Method in interface nxopen.uf.UFModeling
-
- setBodyEnableMaxFacetSize(boolean) - Method in interface nxopen.motion.BodyContactSphereToCAD
-
License requirements: mechanisms ("MECHANISMS")
.
- setBodyOutput(VarOffsetFaceBuilder.Output) - Method in interface nxopen.features.VarOffsetFaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setBodyOutputOption(ExtendSheetBuilder.BodyOutput) - Method in interface nxopen.features.ExtendSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBodyOutputOption(ExtendSheetBuilder.BodyOutput) - Method in interface nxopen.features.TrimAndExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBodyParts(HumanData.InverseKinematicsBodyParts) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setBodyPoint(Point) - Method in interface nxopen.motion.TireBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBodyPreference(FeatureOptions) - Method in interface nxopen.features.RuledBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setBodyPreference(ThroughCurveMeshBuilder.BodyPreferenceTypes) - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setBodyPreference(ThroughCurvesBuilder.BodyPreferenceTypes) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setBodyProjectArea(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setBodyReverseDirection(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setBodyRules(int) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setBodySiteDisplayFlag(HumanData.EditDisplayBodyParts, boolean) - Method in interface nxopen.features.HumanBuilder
-
Set the default body parts site CSYS display flag.
- setBodySurfaceArea(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setBodySurfaceArea(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setBodyToDelete(ScCollector) - Method in interface nxopen.features.DeleteBodyBuilder
-
License requirements: None.
- setBodyToKeep(ScCollector) - Method in interface nxopen.features.DeleteBodyBuilder
-
License requirements: None.
- setBodyType(FeatureOptions.BodyStyle) - Method in interface nxopen.geometricutilities.FeatureOptions
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBodyType(SessionModeling.BodyTypeOption) - Method in interface nxopen.preferences.SessionModeling
-
Sets the body type.
- setBodyTypePref(int) - Method in interface nxopen.uf.UFModeling
-
- setBodyTypePreference(SectionSurfaceBuilderEx.BodyType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setBodyVector(Direction) - Method in interface nxopen.motion.TireBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBodyWidth(double) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- setBoltHoleCenterlineColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBoltHoleCenterlineColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBoltLoadSequence(NXObject[]) - Method in interface nxopen.cae.SimBcGroup
-
Set the bolt load sequence
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setBomDetailLevelFlag(RoutingPart.DetailLevel) - Method in interface nxopen.preferences.RoutingPart
-
Sets the detail level for the Routing bill of material.
- setBomFormatPart(String) - Method in interface nxopen.preferences.RoutingPart
-
Sets the name of the template Routing bill of material part file.
- setBomListType(BomListBuilder.BomListTypes) - Method in interface nxopen.tooling.BomListBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBomPlugin(CustomManager.BomPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin called just after Routing creates a bill of materials.
- setBomTemplate(String) - Method in interface nxopen.tooling.BomListBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBookmarkComponentsToLoad(boolean, boolean, LoadOptions.BookmarkComponents) - Method in interface nxopen.LoadOptions
-
License requirements: None.
- setBookmarkRefsetLoadBehavior(LoadOptions.BookmarkRefsets) - Method in interface nxopen.LoadOptions
-
Sets the options that specify import and loading of components' reference sets when opening bookmarks.
- setBoolean(int, int, boolean) - Method in interface nxopen.ITableEditorDataProvider
-
Sets boolean data at a particular location in the table.
- setBoolean(int[], int, boolean) - Method in interface nxopen.ITableEditorDataProvider
-
Sets boolean data on a range of table cells in a specified column.
- setBoolean(UFVariant, String, boolean) - Method in interface nxopen.uf.UFUde
-
- setBooleanFaceProperties(SessionModeling.BooleanFacePropertiesInheritance) - Method in interface nxopen.preferences.SessionModeling
-
Sets the boolean face properties inheritance.
- setBooleanOperationAndBody(BooleanOperation.BooleanType, Body) - Method in interface nxopen.geometricutilities.BooleanOperation
-
- setBooleanOperationAndTarget(Feature.BooleanType, Body) - Method in interface nxopen.features.BlockFeatureBuilder
-
Set the boolean operation for creating the block and the boolean operation target body
License requirements: solid_modeling ("SOLIDS MODELING") OR features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setBooleanOptions(DieBooleanBuilder.BooleanType) - Method in interface nxopen.die.DieBooleanBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBooleanPropertyValue(String, boolean) - Method in interface nxopen.BasePropertyTable
-
Sets the boolean value of the property
License requirements: None.
- setBooleanType(Feature.BooleanType) - Method in interface nxopen.features.BlockFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setBooleanUserAttribute(String, int, boolean, Update.Option) - Method in interface nxopen.NXObject
-
Creates or modifies a boolean attribute with the option to update or not.
- setBooleanValue(AttributePropertiesBaseBuilder.BooleanValueOptions) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setBooleanValue(String, boolean) - Method in interface nxopen.cam.CAMObject
-
Set a boolean value to the parameter index for the object.
- setBooleanValue(String, boolean) - Method in interface nxopen.cam.Cycle
-
Set the boolean value of the parameter
License requirements: cam_base ("CAM BASE")
.
- setBooleanValue(boolean) - Method in interface nxopen.cam.UdeParameter
-
License requirements: cam_base ("CAM BASE")
.
- setBoolUserAttribute(Tag, String, int, boolean, boolean) - Method in interface nxopen.uf.UFAttr
-
- setBoolValue(boolean) - Method in interface nxopen.cam.CAMAttribute
-
Set the feature attribute boolean value for a boolean type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.
- setBoolValue(Expression) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBorder(boolean) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setBorderAndZoneStandard(int) - Method in interface nxopen.drawings.BorderAndZoneStyleBuilder
-
License requirements: None.
- setBorderColor(int) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setBorderColor(NXColor) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBorderColor(int) - Method in interface nxopen.preferences.PartDrafting
-
Sets the drafting view border color.
- setBorderColor(int) - Method in interface nxopen.uf.UFDraw
-
- setBorderDisplay(boolean) - Method in interface nxopen.uf.UFDraw
-
- setBorderFont(int) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setBorderInfo(TaggedObject[], int[], int[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets the boundary condition information.
- setBorderLineVisible(boolean) - Method in interface nxopen.cae.xyplot.LegendTableStyle
-
License requirements: None.
- setBorderLineWidth(double) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setBorderLineWidth(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBorderLocation(TableCellStyleBuilder.BorderLocationType) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setBorderOffset(double) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setBordersAndZones(BordersAndZones) - Method in interface nxopen.drawings.DrawingSheet
-
License requirements: drafting ("DRAFTING")
.
- setBorderToArrowDistance(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setBorderToArrowDistance(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBorderTypeItems(FillHoleBuilder.BorderContinuity[]) - Method in interface nxopen.features.FillHoleBuilder
-
Sets array of continuity items
License requirements: None.
- setBorderVisibility(boolean) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setBorderWidth(int) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setBossDimension(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setBothFilletLengths(JointExitBuilder.FilletSizes) - Method in interface nxopen.weld.JointExitBuilder
-
Sets the symmetric fillet weld values for a welding joint.
- setBottom(IOrientation) - Method in interface nxopen.die.RibChildBuilder
-
Sets the bottom limit geometry of the die rib.
- setBottom(double) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setBottomBorder(RenderingPropertiesBuilder) - Method in interface nxopen.diagramming.tables.CellBuilder
-
License requirements: None.
- setBottomColor(double[]) - Method in interface nxopen.display.Background
-
Sets the bottom color
License requirements: None.
- setBottomCorner(Point3d) - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setBottomDeckSectionName(String) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setBottomEnd(IOrientation) - Method in interface nxopen.die.RibChildBuilder
-
Sets the bottom end limit geometry of the die rib.
- setBottomEndByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RibChildBuilder
-
Sets the bottom end limit geometry of the die rib using a profile.
- setBottomExtension(WeldGrooveExtension) - Method in interface nxopen.weld.GrooveBuilder
-
- setBottomHorizontalOffset(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the bottom horizontal offset of the die rib.
- setBottomHorizontalOffset(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the bottom horizontal offset of die ribs.
- setBottomLimitOffset(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the bottom limit offset of the die rib.
- setBottomLimitOffset(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the bottom limit offset of die ribs.
- setBottomMargin(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setBottomMargin(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setBottomPlateClearance(double) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBottomPlateClearance(double) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setBottomPlateClearance(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setBottomShapeControlMethods(StyledCornerBuilder.ShapeControlMethodsTypes) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setBottomTrimmedMargin(double) - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
License requirements: None.
- setBottomTrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBottomUntrimmedMargin(double) - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
License requirements: None.
- setBottomUntrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBottomVertex(double, double, double) - Method in interface nxopen.tooldesigner.SelectWeldsBuilder
-
Set Bottom Vertex for volume search
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setBottomVerticalOffset(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the bottom vertical offset of the die rib.
- setBottomVerticalOffset(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the bottom vertical offset of die ribs.
- setBottomView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBoundary(boolean) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setBoundary1Plane(Plane) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBoundary2Plane(Plane) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBoundaryApproximation(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setBoundaryAssoc(Tag) - Method in interface nxopen.uf.UFDraw
-
- SetBoundaryAssocData() - Constructor for class nxopen.uf.UFDraw.SetBoundaryAssocData
-
- setBoundaryBody(Body) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Sets the boundary body to do channel extension
License requirements: None.
- setBoundaryChannelExtension(double) - Method in interface nxopen.tooling.CoolingExtendBuilder
-
License requirements: None.
- setBoundaryDisplay(boolean) - Method in interface nxopen.diagramming.AnnotationBuilder
-
License requirements: None.
- setBoundaryFacesColor(NXColor) - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
License requirements: None.
- setBoundaryFacetTreatmentType(SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setBoundaryInTol(double) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setBoundaryLayerSize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setBoundaryMethod(WeldFillBuilder.BoundaryMethodType) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setBoundaryOnePoints(Point3d[]) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Sets the selected intersection points for the first boundary.
- setBoundaryOptions(AssignNodalCSBuilder.GeometryOption) - Method in interface nxopen.cae.AssignNodalCSBuilder
-
License requirements: None.
- setBoundaryOutTol(double) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setBoundaryPlane(Plane) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBoundaryPlane(UFVariant, double[], double[]) - Method in interface nxopen.uf.UFCambnd
-
- setBoundaryPoint1(Point) - Method in interface nxopen.drawings.DetailViewBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBoundaryPoint1(Point) - Method in interface nxopen.drawings.RefineDisplayBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBoundaryPoint1(Point) - Method in interface nxopen.drawings.ViewBoundaryBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setBoundaryPoint2(Point) - Method in interface nxopen.drawings.DetailViewBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBoundaryPoint2(Point) - Method in interface nxopen.drawings.RefineDisplayBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBoundaryPoint2(Point) - Method in interface nxopen.drawings.ViewBoundaryBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setBoundaryReverse(boolean) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBoundarySection(Section) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBoundarySegment(int) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setBoundaryStatus(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the boundary status.
- setBoundaryStatus(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBoundaryStatus(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the boundary status.
- setBoundaryStock(double) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setBoundaryTwoPoints(Point3d[]) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Set the selected intersection points for the second boundary.
- setBoundaryType(BoundarySet.BoundaryTypes) - Method in interface nxopen.cam.BoundarySet
-
License requirements: cam_base ("CAM BASE")
.
- setBoundaryType(DiagrammingAnnotationboundarytype) - Method in interface nxopen.diagramming.AnnotationBuilder
-
License requirements: None.
- setBoundaryType(ViewBoundaryBuilder.Type) - Method in interface nxopen.drawings.ViewBoundaryBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setBoundaryType(PlateBoundaryOptionBuilder.BoundaryTypes) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setBoundaryType(TrimRegionBuilder.BoundaryOption) - Method in interface nxopen.tooling.TrimRegionBuilder
-
License requirements: None.
- setBoundBox(SpecialPiercingInsertBuilder.BoundBoxType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBoundBox(Body) - Method in interface nxopen.tooling.TrimSolidBuilder
-
Sets the bounding box tag.
- setBoundedBlockOrUserDefined(SpecialFormingBuilder.BlockType) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBoundedBoxBuilder(ToolingBoxBuilder) - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
Sets the new bounded box feature builder.
- setBoundedCurvature(boolean) - Method in interface nxopen.routing.SplinePathBuilder
-
License requirements: routing_advanced ("Routing Advanced")
.
- setBoundingBox(Point3d, Point3d) - Method in interface nxopen.display.DynamicSectionBuilder
-
Sets bounding box for the section.
- setBoundingBox(ViewCopyTo3dBuilder.BoundingBoxOption) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setBoundingBoxBuilder(CreateBoxBuilder) - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
- setBoundingBoxClearance(double) - Method in interface nxopen.cam.NcmClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setBoundingBoxMap(SpatialMap.BoundingBoxMapEnum) - Method in interface nxopen.fields.SpatialMapBuilder
-
License requirements: None.
- setBoundingBoxType(DieInsertBuilder.BoundingBoxTypeItems) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBoundingObjectMethod(BoundingObjectBuilder.Method) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setBoundingObjectMethodType(TrimCurveBoundingObjectBuilder.Method) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBoundingPlane(Plane) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setBoundingPlane(Plane) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setBoundingPoint(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setBoundingPoint1(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setBoundingPoint2(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setBoundingProjectPoint(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setBoundingVector(Direction) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setBoundingVolumeDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setBoundSections1(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setBoundSections2(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setBOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setBoxClearance(double) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBoxColor(NXColor) - Method in interface nxopen.cae.PostAnnotation
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setBoxColor(NXColor) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setBoxColor(int) - Method in interface nxopen.tooling.CreateBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setBoxColorValue(Point3d) - Method in interface nxopen.tooling.CreateBoxBuilder
-
Sets box color.
- setBoxCsysPosition(Point3d) - Method in interface nxopen.tooling.CreateBoxBuilder
-
Sets point position of csys for box.
- setBoxExtentDelayUpdate(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setBoxExtentMargin(double) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setBoxFaceToggle(boolean) - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBoxFill(boolean) - Method in interface nxopen.cae.PostAnnotation
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setBoxMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.features.ToolingBoxBuilder
-
Sets box csys matrix.
- setBoxMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.CreateBoxBuilder
-
Sets box csys matrix.
- setBoxMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Sets box csys matrix.
- setBoxMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Sets box csys matrix.
- setBoxOrientation(PathTransitionBuilder.HealOrientation) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setBoxOverlapLogic(BoxSearchTerm.BoxOverlapLogicType) - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setBoxPosition(Point3d) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setBoxPosition(Point3d) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBoxPosition(Point3d) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBoxPosition(Point3d) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBoxTextAlignment(PostAnnotation.TextAlignment) - Method in interface nxopen.cae.PostAnnotation
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setBoxTranluceny(boolean) - Method in interface nxopen.cae.PostAnnotation
-
- setBoxTranslucency(boolean) - Method in interface nxopen.cae.PostAnnotation
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setBP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP3Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP3LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP3Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP3RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP4Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP4LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP4Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBP4RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBPillarFeature(HeadImpactBPillar) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBranchAngleMethod(FormboardLayoutBuilder.BranchAngle) - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setBranchAngleType(OrientBranchBuilder.BranchAngleMethod) - Method in interface nxopen.formboard.OrientBranchBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setBranchSeedObject(ISegment) - Method in interface nxopen.formboard.OrientBranchBuilder
-
Sets the selected branch
ISegment
when
a branch is selected by branch method by Routing Object Collector.
- setBranchShapeType(FormboardLayoutBuilder.BranchShape) - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setBreadthPercentile(HumanHandsDialogBuilder.BreadthType) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setBreadthValue(double) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setBreakerHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the breaker hole attributes, note existance of attributes depends on usage in
main feature
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
Sets the breaker hole attributes, note existance of attributes depends on usage in
main feature
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleDepth(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleDepth(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleDirection(ILocation) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the breaker hole direction of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleFactor(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleFactor(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleLocation(ILocation) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the location of breaker holes for the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleOffset(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleOffset(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setBreakerHoleShape(DirectionOption, IProfile[]) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the breaker hole shape of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setBreakGap(double) - Method in interface nxopen.drawings.ViewBreakBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBreakingMode(BreakingConstraintBuilder.BreakingModeType) - Method in interface nxopen.mechatronics.BreakingConstraintBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBreakInterpartExpression(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setBreakLine1Anchor(Point) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setBreakLine1Associative(boolean) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setBreakLine1ModelAnchor(Point) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setBreakLine2Anchor(Point) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setBreakLine2Associative(boolean) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setBreakLine2ModelAnchor(Point) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setBreakLineAmplitude(double) - Method in interface nxopen.drawings.ViewBreakBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBreakLineAmplitude(double) - Method in interface nxopen.preferences.PartDrafting
-
Sets the break line amplitude.
- setBreakLineColor(NXColor) - Method in interface nxopen.preferences.PartDrafting
-
Sets the break line color.
- setBreakLineExtension(double) - Method in interface nxopen.drawings.ViewBreakBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBreakLineExtension(double) - Method in interface nxopen.preferences.PartDrafting
-
Sets
License requirements: None.
- setBreakLineGap(double) - Method in interface nxopen.preferences.PartDrafting
-
Sets the break line gap.
- setBreakLineStyle(ViewBreakBuilder.Viewbreaklinestyle) - Method in interface nxopen.drawings.ViewBreakBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBreakLinesVisibility(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the break lines visibility.
- setBreakLineType(BrokenViewBuilder.BreakLineStyle) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setBreakLineType(PartDrafting.BreakLineStyle) - Method in interface nxopen.preferences.PartDrafting
-
Sets the break line type.
- setBreakLineWidth(int) - Method in interface nxopen.preferences.PartDrafting
-
Sets the break line width.
- setBreakoutData(Tag, UFDraw.BreakoutData) - Method in interface nxopen.uf.UFDraw
-
- setBreakRegionData(Tag, UFDraw.BreakRegionData) - Method in interface nxopen.uf.UFDraw
-
- setBreakSize(double) - Method in interface nxopen.annotations.BreakSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setBreakThrough(boolean) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
- setBreakType(BrokenViewBuilder.TypeBreak) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setBreakUnLockedTemplate(boolean) - Method in interface nxopen.ame.ProductSelectionBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setBreakVisibility(boolean) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setBreakWaveLink(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setBridgeContinuity(VarOffsetFaceBuilder.Continuity) - Method in interface nxopen.features.VarOffsetFaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setBridgedGapSize(double) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setBridgeGap(boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder
-
License requirements: None.
- setBrightColor(double[]) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Sets the color of the bright (lit) areas of reflection contours
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setBrightness(double) - Method in interface nxopen.display.RayTracedStudioBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setBsplineTol(double) - Method in interface nxopen.Step203Creator
-
- setBsplineTol(double) - Method in interface nxopen.Step214Creator
-
- setBsplineTol(double) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setBSurfaceExtractionOption(IFormBuilder.BSurfaceExtractionOptions) - Method in interface nxopen.features.IFormBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setBsurfKnotDisplay(Tag, boolean) - Method in interface nxopen.uf.UFModlGeneral
-
- setBsurfPoleDisplay(Tag, boolean) - Method in interface nxopen.uf.UFModlGeneral
-
- setBubbleDiameter(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the value of bubble diameter in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setBubbleExtension(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the value of bubble extension of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setBubbleExtensionOffset(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the bubble extension offset value of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setBubbleLeader(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setBubblesUnallowedChars(String) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the bubbles unallowed characters in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setBuildEndTaper(boolean) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBuilder(DrawingCreationWizardBuilder) - Method in interface nxopen.drafting.DrawingAutomationWizard
-
Sets the drawing automation wizard builder
License requirements: None.
- setBuilder(Builder) - Method in interface nxopen.geometricutilities.WaveLinkRepository
-
Set the builder of the active command.If the builder is feat builder,
then the feature from the builder will be queried and used as master feature.
- setBuilderData(Line, double[], String, double, int) - Method in interface nxopen.routing.AddFontBuilder
-
Takes selected line and information on the font selected which will be used to build the font
License requirements: routing_base ("Routing Basic")
.
- setBuilderData(Line, Line, double, Point3d, Point3d, boolean, boolean) - Method in interface nxopen.routing.GapDisplayBuilder
-
Takes selected line, gap start and end points, and gap
type settings in to set builder data.
- setBuilderType(ProxyObjectBuilder.Type) - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setBuilderVersion(ObjectBuilder.BuilderVersion) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Sets the version of this builder.
- setBuilderVersion(CopyPasteBuilder.BuilderVersion) - Method in interface nxopen.features.CopyPasteBuilder
-
The builder version setting function.
- setBuildSolid(boolean) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBuildSolid(boolean) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBuildSolid(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setBuildStartTaper(boolean) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBuiltInPathObjs(Tag, int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- setBuiltupManMode(BuiltUpManModeBuilder.BuiltUpManModeType) - Method in interface nxopen.features.shipdesign.BuiltUpManModeBuilder
-
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setBulkheadEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setBulkHeadName(String) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setBulkHeads(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBulkHeadsTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setBumperPlane(Plane) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBundleColor(int) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the default bundle color.
- setBundlePlugin(CustomManager.BundlePlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will call to determine the bundle diameter for each
bundle in a harness.
- setBundlesForUse(String[]) - Method in interface nxopen.LicenseManager
-
Changes the existing license bundle selection.
- setBurringColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setBurringDirection(BurringInsertBuilder.BurringDirections) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBurringPunchType(BurringInsertBuilder.BurringPunchTypes) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setBushingData(FEElement, PhysicalPropertyTable, CaeElementAssociatedDataUtilsOrientationMethod, Direction, CoordinateSystem, FENode, CaeElementAssociatedDataUtilsCsysDataType, Point3d, Point3d, Point3d, int) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets bushing element associated data.
- setBushingJointAsymmetric(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setBushingType(BushingBuilder.BushingTypes) - Method in interface nxopen.motion.BushingBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setBusinessModifier(NXObject) - Method in interface nxopen.annotations.PmiAttributeBuilder
-
License requirements: None.
- setBusinessModifiers(BusinessModifier[]) - Method in interface nxopen.annotations.IPmi
-
Sets the business modifiers.
- setBusinessModifiers(BusinessModifier[]) - Method in interface nxopen.annotations.PmiData
-
Sets the business modifiers
License requirements: None.
- setBusinessProcessModifierData(Tag, UFPd.BusinessModifier) - Method in interface nxopen.uf.UFPd
-
- setButtColor(int) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setButtFont(DisplayableObject.ObjectFont) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setButtonSensitivity(MenuButton.SensitivityStatus) - Method in interface nxopen.menubar.MenuButton
-
Sets the sensitivity of the button.
- setButtonSensitivity(int, UFMb.State) - Method in interface nxopen.uf.UFMb
-
- setButtWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setBwiWeldClass(DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setByAboveText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByAfterText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByAngle(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByBeforeText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByBelowText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByCalloutType(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByCharacteristic(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByCircleU(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByCircleUValue(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByCollectionPlane(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByColor(boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder
-
License requirements: None.
- setByCounterboreDepth(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByCounterboreDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByCountersinkAngle(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByCountersinkDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByCutoff(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByDatumFeatureSymbolLabel(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumFeatureSymbolBuilder
-
License requirements: None.
- setByDatumMovable(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setByDatumTargetLabel(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setByDatumTargetType(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setByDepth(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByDeviation(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByDiameterSymbol(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByDimensionType(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByDimensionValue(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByDirectionFeature(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByFreeState(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByGrade(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByHeight(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setByIndicator(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByInnerDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setByIntersectionPlane(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByLaySymbol(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByLowerText(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByLowerTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByLowerTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByMachining(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByMachiningToleranceType(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByMaximum(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByOrientationPlane(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByOuterDiameter(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setByPitch(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByPrimaryDatum(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setByPrimaryDatumDual(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setByPrimaryDatumDualMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setByPrimaryDatumMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setByProductionProcess(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByProjected(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByProjectedValue(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByRadialSymbol(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByRoughness(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByScrewSize(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setBySecondaryDatum(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setBySecondaryDatumDual(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setBySecondaryDatumDualMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setBySecondaryDatumMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setBySecondaryRoughness(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByStatistical(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setBySurfaceFinishType(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByTangentPlane(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByTaperAngle(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByteOffset(int) - Method in interface nxopen.ame.PlcVendorSymbolBuilder
-
License requirements: None.
- setByTertiaryDatum(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setByTertiaryDatumDual(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setByTertiaryDatumDualMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setByTertiaryDatumMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setByTertiaryRoughness(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByText(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setByText(boolean) - Method in interface nxopen.annotations.SearchCriteriaPMINotesBuilder
-
License requirements: None.
- setByThreadDepth(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByThreadSize(boolean) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setByTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByToleranceMCM(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setByToleranceType(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByUpperText(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByUpperTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setByUpperTolerance(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByWavinessText(boolean) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setByWidth(boolean) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setByZoneShape(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setC(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setC(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setC0KnotLineColor(int) - Method in interface nxopen.preferences.PartModeling
-
Sets the C0 knot line color
License requirements: None.
- setC0KnotLineFont(PartModeling.GridKnotLineFontType) - Method in interface nxopen.preferences.PartModeling
-
Sets the C0 knot line font
License requirements: None.
- setC0KnotUseBodyColor(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets whether c0 knot line use body color
License requirements: None.
- setC0KnotUseBodyFont(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets whether C0_knot use body font
License requirements: None.
- setC1KnotLineColor(int) - Method in interface nxopen.preferences.PartModeling
-
Sets the C1 knot line color
License requirements: None.
- setC1KnotLineFont(PartModeling.GridKnotLineFontType) - Method in interface nxopen.preferences.PartModeling
-
Sets the C1 knot line font
License requirements: None.
- setC1KnotUseBodyColor(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets whether c1 knot line use body color
License requirements: None.
- setC1KnotUseBodyFont(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets whether C1_knot use body font
License requirements: None.
- setC2KnotLineColor(int) - Method in interface nxopen.preferences.PartModeling
-
Sets the C2 knot line color
License requirements: None.
- setC2KnotLineFont(PartModeling.GridKnotLineFontType) - Method in interface nxopen.preferences.PartModeling
-
Sets the C2 knot line font
License requirements: None.
- setC2KnotUseBodyColor(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets whether c2 knot line use body color
License requirements: None.
- setC2KnotUseBodyFont(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets whether C2_knot use body font
License requirements: None.
- setCabinetState(CabinetNode, CabinetRoot.CabinetState) - Method in interface nxopen.ame.CabinetRoot
-
Updates the cabinet according to its new state
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCableDirection(Direction) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Sets the cable direction.
- setCableLocation(int) - Method in interface nxopen.routing.electrical.CableStockDefinition
-
Sets the cable stock's location
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setCacheNcProgram(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setCadData(Part, String) - Method in interface nxopen.cae.FemCreationOptions
-
Set associated CAD data
License requirements: None.
- setCaeSectionPropertyValue(String, BeamSectionOptions) - Method in interface nxopen.cae.PropertyTable
-
Sets the beam section options
BeamSectionOptions
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.0
- setCageCode(String) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
-
License requirements: None.
- setCagePolylineColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCagePolylineFont(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCagePolylineVertexColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCagePolylineVertexSize(SubdivisionModelingPreferences.CagePolylineVertexSizes) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCagePolylineVertexStyle(SubdivisionModelingPreferences.CagePolylineVertexStyles) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCagePolylineWidth(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCalculateBeamResults(boolean) - Method in interface nxopen.cae.ResultMeasureResultAllOptions
-
Set the option to calculate beam stresses for beam results only
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCalculateBeamStrResults(boolean) - Method in interface nxopen.cae.ResultParameters
-
Sets a flag to calculate beam stresses and strains
from element forces and section geometry (if available).
- setCalculateMaxDeviation(boolean) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setCalculateMomentAboutPoint(boolean) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setCalculatePenetrationDepth(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setCalculateStaticOffset(boolean) - Method in interface nxopen.cae.responsesimulation.RSEvent
-
Set the option setting for calculating static offset result.
- setCalculation(HeadImpactBuilder.CalculationType) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCalculationCalculateMethod(WallThicknessCheckerBuilder.CalculateMethod) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setCalculationDrawDirection(Direction) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setCalculationMaximumSpacing(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setCalculationMaximumThicknessTolerance(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setCalculationMethod(ClearanceAnalysisBuilder.CalculationMethodType) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setCalculationMethod(int) - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setCalculationMethod(InnerAngleBuilder.CalculationMethodType) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCalculationMethod(SectionAnalysisBuilder.CalculationMethodType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setCalculationMethod(SectionAnalysisExBuilder.CalculationMethodType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setCalculationMethod(SurfaceIntersectionBuilder.CalculationTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setCalculationOption(MWMoldedPartValidationBuilder.CalculateOption) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setCalculationProductBody(Body) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Set the product body to be analyzed on the Calculate Tab page.
- setCalculationProjectToFace(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setCalculationSamplePointsIntervalScale(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setCalculationType(ForceCalculationBuilder.CalculationTypes) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setCalibrationDepth(double) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setCalibrationType(ProbeCalibrateStylusMoveBuilder.CalibrateStylusType) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setCallbackMessage(String) - Method in interface nxopen.weld.JointItemBuilder
-
Sets a message to display after callback processing ends
License requirements: structure_weld ("STRUCTURE WELD")
.
- setCallbackMessage(String) - Method in interface nxopen.weld.WeldJointBuilder
-
Sets a message to display after callback processing ends
License requirements: structure_weld ("STRUCTURE WELD")
.
- setCalloutModeType(CalloutGroupBuilder.Mode) - Method in interface nxopen.annotations.CalloutGroupBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCalloutSuffix(String) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setCalloutType(SearchCriteriaCalloutBuilder.CalloutTypes) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setCalPageNormalVector(Direction) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setCamAxis(Axis) - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setCamber(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCamber(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCamCollisionFacetingTolerance(double) - Method in interface nxopen.presslinesimulation.DrivenCamBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setCamDefinitionMethod(MotionSimulationBuilder.CamDefinitionType) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
- setCamDir(Direction) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setCamDir(Direction) - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
License requirements: None.
- setCamDirection(ILocation) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the cam direction of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCamDirection(ILocation) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the cam direction of the form task.
- setCamDirection(ILocation) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the cam direction of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCamDirection(IReferenceAxis) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the cam direction of the steelinsert
License requirements: ug_die_design ("Die Design")
.
- setCamDirection(ILocation) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the cam direction of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCamDirection(Direction) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCamDirection(Direction) - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCamDiskRefPoint(Point) - Method in interface nxopen.mechatronics.CamBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCamDiskType(CamBuilder.CreateCamDiskType) - Method in interface nxopen.mechatronics.CamBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCamera(String) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCameraAxis(Axis) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCameraCsys(CoordinateSystem) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCameraDistance(double) - Method in interface nxopen.display.PerspectiveOptionsBuilder
-
License requirements: None.
- setCameraLayerAndXmlp(String[], String[]) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the camera layer settings and xmlp data
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCameraLayerAndXmlp(String[], String[]) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the camera layer settings and xmlp data
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCameraLayerAndXmlp(String[], String[]) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the camera layer settings and xmlp data
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCameraMatrix(Matrix3x3) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setCameraName(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setCameraName(String) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setCameraNameChar(String) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setCameraNames(String[]) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the names of the camera
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCameraNames(String[]) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the names of the camera
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCameraNames(String[]) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the names of the camera
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCameraPosition(Point3d) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setCameraType(CloseRangeCameraListItemBuilder.Types) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCameraViews(View[]) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the camera views of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCameraViews(View[]) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the camera views of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCameraViews(View[]) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the camera views of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCamName(String) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCamPreferences(UFCam.Preferences) - Method in interface nxopen.uf.UFCam
-
- setCamProfile(CamProfile) - Method in interface nxopen.mechatronics.CamBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCamProfile(CamProfile) - Method in interface nxopen.mechatronics.GraphControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCAMRelief(double) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCamStatus(boolean) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setCamType(FlangeTaskBuilder.CamTypes) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the cam type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCamType(PierceTaskBuilder.CamTypes) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the cam type of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCamType(TrimTaskBuilder.CamTypes) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the cam type of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCamType(DieEngTrimTaskBuilder.TrimTaskCamType) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCamunitColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setCamValue(int) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setCanAllowBackSideSelection(boolean) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCanApplyToAll(boolean) - Method in interface nxopen.features.IFormBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCanBlend(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCancelled() - Method in interface nxopen.PolygonModelingTaskEnvironment
-
Marks the task to be cancelled such that during task is undone and all the changes are discarded.
- setCancelled() - Method in interface nxopen.SubdivisionTaskEnvironment
-
- setCanConnectSymmetrically(boolean) - Method in interface nxopen.features.subdivision.SubdivisionFillBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanCopyAsSketch(boolean) - Method in interface nxopen.gateway.CopyCutBuilder
-
License requirements: None.
- setCanCreateAltrep(boolean) - Method in interface nxopen.FileNew
-
Sets the flag specifying if the current template customization allows Alternate representation creation using the template
License requirements: None.
- setCanCreateBoundingBox(boolean) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCanCreateNewBody(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCanCreateNewBody(boolean) - Method in interface nxopen.features.IFormBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCanCreateSingleFeature(boolean) - Method in interface nxopen.features.subdivision.ImportSubdivisionGeometryBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanDeselectObjectsAutomatically(boolean) - Method in interface nxopen.features.subdivision.SelectCageObjectData
-
- setCandidateType(TransmitterEntryBuilder.TransmitterEntryCandidateType) - Method in interface nxopen.mechatronics.TransmitterEntryBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCandidateView(DraftingView) - Method in interface nxopen.drawings.ViewAlignmentBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCanDivide(boolean) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCanHide(boolean) - Method in interface nxopen.diagramming.tables.CellRangeBuilder
-
License requirements: None.
- setCanInferConstraintFromAttachmentParent(boolean) - Method in interface nxopen.features.GeometricConstraintData
-
License requirements: None.
- setCanJoinCurves(boolean) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCanKeepParameterization(boolean) - Method in interface nxopen.features.IFormBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCanKeepTemplateSelected(boolean) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCanMoveAlongCurve(boolean) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCanMoveToolOnly(boolean) - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanMoveToolOnly(boolean) - Method in interface nxopen.features.subdivision.PasteCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanMoveToolOnly(boolean) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanMoveToolOnly(boolean) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanOptimizeCurve(boolean) - Method in interface nxopen.features.IsoclineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCanProjectCurves(boolean) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCanReferenceText(boolean) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCanRejectPointsAutomatically(boolean) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCanRelocateToolToSelection(boolean) - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanRelocateToolToSelection(boolean) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanRelocateToolToSelection(boolean) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanReorientToolToSelection(boolean) - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanReorientToolToSelection(boolean) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanReorientToolToSelection(boolean) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanResetMcf(boolean) - Method in interface nxopen.features.FeatureCollection
-
Sets whether mcf is allowed
License requirements: None.
- setCanReverseDirection(boolean) - Method in interface nxopen.features.subdivision.CageSectionData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanReverseDirection(boolean) - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setCanReverseIntersectionCurve(boolean) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCanReverseOffsetDirection(boolean) - Method in interface nxopen.features.subdivision.OffsetCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanSew(boolean) - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanSew(boolean) - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanSew(boolean) - Method in interface nxopen.features.subdivision.SubdivisionSweepBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCanShowFacet(boolean) - Method in interface nxopen.geometricanalysis.FaceAnalysisDisplayBuilder
-
License requirements: None.
- setCanShowWeight(boolean) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCanStretchHeight(boolean) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setCanStretchWidth(boolean) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setCanUseAllPointsInPart(boolean) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCanUseFaceFinder(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCanUseFaceFinder(boolean) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCanUseKerningSpaces(boolean) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCanUseOrientationTool(boolean) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setCanUseOrientationTool(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCapacity(double) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setCapColor(NXColor) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setCapColorOption(DynamicSectionTypes.CapColorOption) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setCapFace(ScCollector) - Method in interface nxopen.features.EmbossBodyBuilder
-
License requirements: None.
- setCapOption(DeleteFaceBuilder.CapOptionValues) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCapPlane(Plane) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCaption(ImageDocumentData.CaptionPosition, String) - Method in interface nxopen.openxml.ImageDocumentData
-
Sets the caption of the image data
License requirements: None.
- setCaption(TableDocumentData.CaptionPosition, String) - Method in interface nxopen.openxml.TableDocumentData
-
Sets the caption of the table data
License requirements: None.
- setCaption(String) - Method in interface nxopen.report.ReportImage
-
License requirements: None.
- setCaptureArea(MovieSettingsBuilder.CaptureAreaChoices) - Method in interface nxopen.MovieSettingsBuilder
-
License requirements: None.
- setCaptureMethod(ImageCaptureBuilder.CaptureMethodType) - Method in interface nxopen.gateway.ImageCaptureBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCapType(SketchOffset.CapType) - Method in interface nxopen.SketchOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCardName(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setCarrierCsys(CoordinateSystem) - Method in interface nxopen.motion.TireBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCarrierPoint(Point) - Method in interface nxopen.motion.TireBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCaseSensitive(boolean) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setCastRelief(DirectionOption, IProfile[]) - Method in interface nxopen.die.CastReliefParentBuilder
-
Sets the profile of the cast relief.
- setCatalog(DieBaseBuilder.CatalogOpt) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setCatalogFilename(String) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setCategory(String) - Method in interface nxopen.annotations.BalloonNoteBuilder
-
License requirements: None.
- setCategory(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setCategory(String) - Method in interface nxopen.annotations.GeneralNoteBuilder
-
License requirements: None.
- setCategory(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
License requirements: None.
- setCategory(String) - Method in interface nxopen.annotations.SpecificNoteBuilder
-
License requirements: None.
- setCategory(TableColumnBuilder.CategoryType) - Method in interface nxopen.annotations.TableColumnBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCategory(String) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setCategory(String) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setCategory(int) - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCategory(int) - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCategory(int) - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCategory(int) - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCategory(String) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setCategory(String) - Method in interface nxopen.PhysicalMaterial
-
Sets the material category
License requirements: None.
- setCategory(String) - Method in interface nxopen.validate.OverrideBuilder
-
License requirements: ug_checkmate ("UG Check Mate")
.
- setCategoryName(String) - Method in interface nxopen.ame.PropertyEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCategoryName(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setCategoryType(Category) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCategoryType(Category) - Method in interface nxopen.cae.optimization.DAOObjective
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCavityAttributes(String, String, int) - Method in interface nxopen.die.ThroatChildBuilder
-
Sets the cavity attributes, note existance of attributes depends on usage in
main feature.
- setCavityAttributes(String, String, int) - Method in interface nxopen.die.ThroatParentBuilder
-
Sets the cavity attributes, note existance of attributes depends on usage in
main feature.
- setCavityDepth(String) - Method in interface nxopen.die.ThroatChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCavityOffset(String) - Method in interface nxopen.die.ThroatChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCavityPoint(Point3d) - Method in interface nxopen.cae.FluidDomainBuilder
-
Set the cavity point
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setCavityPoints(Point3d[]) - Method in interface nxopen.cae.FluidDomainBuilder
-
Set the cavity points via an array
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setCAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setCellFormatType(TableCellStyleBuilder.CellFormatTypes) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setCellNoValue(int, int) - Method in interface nxopen.GeneralScalarTable
-
Sets cell as having no value
License requirements: None.
- setCellPrefs(Tag, UFTabnot.CellPrefs) - Method in interface nxopen.uf.UFTabnot
-
- setCellText(Tag, String) - Method in interface nxopen.uf.UFTabnot
-
- setCellTypeName(String) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setCellValue(int, int, double) - Method in interface nxopen.GeneralScalarTable
-
Sets cell value
License requirements: None.
- setCellValue(int, int, int) - Method in interface nxopen.GeneralScalarTable
-
Sets cell value
License requirements: None.
- setCellValueForLabel(String, String) - Method in interface nxopen.annotations.EditTitleBlockBuilder
-
Sets the value of the cell for given label.
- setCellValueForLabel(String, String) - Method in interface nxopen.diagramming.PopulateTitleBlockBuilder
-
Sets the value of the cell for given label.
- setCellWidth(int) - Method in interface nxopen.blockstyler.DoubleTable
-
License requirements: None.
- setCenter(ILocation) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Sets the center of the handling core.
- setCenter(ILocation) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the center of the die hole.
- setCenter(double) - Method in interface nxopen.tooldesigner.ReusePieChartBuilder
-
Set center
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setCenter(Tag, double[]) - Method in interface nxopen.uf.UFView
-
- setCenter(boolean) - Method in interface nxopen.uistyler.Attachment
-
Sets whether the dialog item is at the center
License requirements: None.
- setCenterAndRadius(Point2d, double) - Method in interface nxopen.markup.Circle
-
Sets center and radius
License requirements: None.
- setCenterAndRadius(Point2d, double, double) - Method in interface nxopen.markup.Ellipse
-
Sets center and radius
License requirements: None.
- setCenterCross(double) - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCenterCurve(boolean) - Method in interface nxopen.cam.FlowBuilder
-
License requirements: None.
- setCenterCurveDirectionReversed(boolean) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCenterCurveUsedAsSpine(boolean) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCenterDiameter(Point, Expression) - Method in interface nxopen.cae.SphereBoundingVolume
-
Sets the center point and diameter for the Sphere Bounding Volume.
- setCenterHole(boolean) - Method in interface nxopen.die.PadChildBuilder
-
Sets the center hole switch of the die pad, if true the center hole will be created in the pad, if false it will not.
- setCenterHole(boolean) - Method in interface nxopen.die.PadParentBuilder
-
Sets the center hole switch of die pads, if true the center hole will be created in the pads, if false they will not.
- setCenteringMarkExtension(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setCenteringMarkExtension(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setCenteringMarkLength(double) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setCenteringMarkLength(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCenteringMarksExtension(double) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setCenteringMarksExtension(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCenteringMarksHorizontal(HorizontalCenteringMarkType) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setCenteringMarksHorizontal(HorizontalCenteringMarkType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCenteringMarksVertical(VerticalCenteringMarkType) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setCenteringMarksVertical(VerticalCenteringMarkType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCenterLengthAndWidth(Point2d, double, double) - Method in interface nxopen.markup.Rectangle
-
Sets center length and width
License requirements: None.
- setCenterline(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterline(DirectionOption, IProfile[]) - Method in interface nxopen.die.RibChildBuilder
-
Sets the centerline of the rib.
- setCenterline(Plane) - Method in interface nxopen.features.shipdesign.HullBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCenterlineCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setCenterlineCurve(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCenterlineCycle(CenterlineDrillTurningBuilder.CycleTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCenterlineJigOnPlane(JigOnPlaneBuilder) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setCenterlineLength(String) - Method in interface nxopen.tooling.WireHoleBuilder
-
License requirements: None.
- setCenterlineProjection(DrawBeadBuilder.ProjectionDirectionTypes) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCenterlines(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
The status of center line, if true automatically creates
linear, cylindrical, and bolt circle centerlines (with a
circular instance set) for views where the hole or pin axis
is perpendicular or parallel to the plane of the drawing view.
- setCenterLines(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCenterlines(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCenterlines(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of center line.
- setCenterlineSlotCreate(boolean) - Method in interface nxopen.die.DieShoeBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCenterlineSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the centerline symbol color, font, and width
License requirements: None.
- setCenterlineSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setCenterlineSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setCenterlineXyOffset(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the centerline xy offset of the die rib.
- setCenterlineXyOffset(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the centerline xy offset of die ribs.
- setCenterlineYLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterlineYLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterlineYLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterlineYLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterlineYTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterlineYTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterlineYTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterlineYTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterlineYTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCenterOfGravity(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCenterOption(AestheticFaceBlendBuilder.CenterType) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCenterPoint(Point) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
License requirements: None.
- setCenterPoint(Point) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: None.
- setCenterPoint(Point) - Method in interface nxopen.cam.LaserCutoutDefinition
-
License requirements: cam_base ("CAM BASE")
.
- setCenterPoint(Point) - Method in interface nxopen.features.BlendCornerBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setCenterPoint(Point) - Method in interface nxopen.features.OffsetEmbossBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCenterPoint() - Method in interface nxopen.features.OvercrownBuilder
-
Sets the point in forming region.
- setCenterPoint(Point) - Method in interface nxopen.features.SphereBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCenterPoint(Point) - Method in interface nxopen.features.StudioXformBuilder
-
- setCenterPoint(Point) - Method in interface nxopen.mechatronics.CollisionShapeBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCenterPoint(Point) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCenterPoint(Point) - Method in interface nxopen.SketchEllipseBuilder
-
License requirements: None.
- setCenterPoint(Point) - Method in interface nxopen.SketchPolygonBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCenterPointOption(PierceTaskBuilder.CenterPointOptionTypes) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the center point output option of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCenterPointReference(AssociativeArcBuilder.CenterReference) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointX(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointX(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointX(double) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointX(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointY(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointY(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointY(double) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointY(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointZ(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointZ(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointZ(double) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterPointZ(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterRadiusLockedPlaneDirection(Vector3d) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCenterSymbol(boolean) - Method in interface nxopen.annotations.LineWeldData
-
Sets the flag indicating whether the weld symbol is at center of
reference line, applicable only to spot and seam symbols
License requirements: None.
- setCgmflBrsr(String) - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setCgmSizeMode(int, double[]) - Method in interface nxopen.uf.UFStd
-
- setChainableCurveTypes(RoutingPath.CurveType[]) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setChainElementIndex(int) - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setChaining(BendTaperBuilder.ChainingType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
- setChainingTolerance(double) - Method in interface nxopen.features.ExtrudeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setChainingTolerance(double) - Method in interface nxopen.features.SweepAlongGuideBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setChainingTolerance(double) - Method in interface nxopen.Section
-
License requirements: gateway ("UG GATEWAY")
.
- setChainOffset(double) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the offset between dimension lines of chain dimensions
License requirements: None.
- setChainOffset(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setChainWithinFeature(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setChainWithinFeature(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setChamferBothSides(boolean) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setChamferDimensionData(Tag, UFDrf.ChamferDimensionData) - Method in interface nxopen.uf.UFDrf
-
- setChamferDimensionPreferences(ChamferDimensionPreferences) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the chamfer dimension preferences
License requirements: None.
- setChamferDistance(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the chamfer distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- setChamferDistance(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Sets the chamfer distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setChamferEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setChamferForm(ChamferForm) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setChamferLeaderType(ChamferLeaderPlacement) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setChamferOffset(double) - Method in interface nxopen.cam.ChamferMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setChamferOption(SketchChamferBuilder.ChamferOptions) - Method in interface nxopen.SketchChamferBuilder
-
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setChamferOrientation(ChamferOrientationType) - Method in interface nxopen.annotations.BaseChamferDimension
-
Sets a value of chamfer dimension linear leader parallel
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setChamferReference(ChamferMillingBuilder.ChamferReferenceType) - Method in interface nxopen.cam.ChamferMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setChamferSeparator(ChamferSeparatorType) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Sets the chamfer separator type
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setChamferSpaceFactor(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setChamferStubType(ChamferStubType) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setChamferSymbolName(String) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setChamferSymbolType(ChamferSymbolPlacement) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setChamferType(ResizeChamferBuilder.SectionType) - Method in interface nxopen.features.ResizeChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setChangeAllBoundaryConstraints(boolean) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setChangeAllSizes(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
License requirements: None.
- setChangeApproachRetract(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setChangeBoxSize(boolean) - Method in interface nxopen.tooling.TrimSolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setChangeComponentVisibility(boolean) - Method in interface nxopen.assemblies.ConstraintDisplayBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setChangeoverName(String) - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
License requirements: None.
- setChangeProbeAngles(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setChangeProbeTip(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setChangeSymbolSize(double) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setChangeSymbolType(TrackDrawingChangesGeneralBuilder.SymbolType) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setChangeTipOrientations(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setChangeTipOrigin(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setChangeViewOrientation(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether the view orientation will be changed to align with the sketch when the sketch is activated.
- setChangeViewOrientation(boolean) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setChangeWallThickness(boolean) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setChannel(UFVariant, int) - Method in interface nxopen.uf.UFSim
-
- setChannelColor(NXColor) - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setChannelColor(double, double, double) - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
- setChannelColor(NXColor) - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setChannelDiameter(double) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
License requirements: None.
- setChannelDiameter(double) - Method in interface nxopen.tooling.CoolingPatternBuilder
-
License requirements: None.
- setChannelName(String) - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setChannelName(String) - Method in interface nxopen.cam.MachineTurretGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setChannelName(String) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setChannelName(String) - Method in interface nxopen.cam.ToolBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setChannelPlaneMill(String, MachineToolConfiguration.PlaneTypes) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the plane mill for a channel
License requirements: None.
- setChannelPlaneTurn(String, MachineToolConfiguration.PlaneTypes) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the plane turn for a channel
License requirements: None.
- setChannelSwiveling(String, MachineToolConfiguration.SwivelingTypes) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the channel's swiveling mode
License requirements: None.
- setChannelTcpmSupport(String, boolean) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the TCPM support value
License requirements: None.
- setChannelToolAsSubprogram(String, boolean) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets a channel's subprogram support
License requirements: None.
- setChannelToolCommand(String, String) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets a channel's tool command
License requirements: None.
- setChannelToolPreselect(String, String) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets a channel's tool preselect
License requirements: None.
- setChannelType(String) - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setCharacteristic(FeatureControlFrameBuilder.FcfCharacteristic) - Method in interface nxopen.annotations.FeatureControlFrameBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCharacteristic(String, int) - Method in interface nxopen.routing.CharacteristicList
-
Sets the value of an integer characteristic associated with the input name.
- setCharacteristic(String, double) - Method in interface nxopen.routing.CharacteristicList
-
Sets the value of an real characteristic associated with the input name.
- setCharacteristic(String, String) - Method in interface nxopen.routing.CharacteristicList
-
Sets the value of an string characteristic.
- setCharacteristic(String, String, NXObject.AttributeType) - Method in interface nxopen.routing.CharacteristicList
-
Sets the value of a string or reference characteristic.
- setCharacteristic(String, int) - Method in interface nxopen.routing.ICharacteristic
-
- setCharacteristic(String, double) - Method in interface nxopen.routing.ICharacteristic
-
- setCharacteristic(String, String) - Method in interface nxopen.routing.ICharacteristic
-
- setCharacteristic(Tag, UFGdt.Characteristic) - Method in interface nxopen.uf.UFGdt
-
- setCharacteristic2(String, int) - Method in interface nxopen.routing.ICharacteristic
-
Sets or creates an integer type attribute associated with the input title.
- setCharacteristic2(String, double) - Method in interface nxopen.routing.ICharacteristic
-
Sets or creates a double type attribute associated with the input title.
- setCharacteristic2(String, String) - Method in interface nxopen.routing.ICharacteristic
-
Sets or creates a string type type attribute associated with the input title.
- setCharacteristicColor(NXColor) - Method in interface nxopen.features.shipdesign.generalarrangement.FaceCharacteristicsBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setCharacteristics(CharacteristicList) - Method in interface nxopen.routing.ChoosePartPluginData
-
Sets the characteristics of the part choosen by the user.
- setCharacteristics(CharacteristicList) - Method in interface nxopen.routing.ICharacteristic
-
- setCharacteristics(CharacteristicList) - Method in interface nxopen.routing.Run
-
Set all of the characteristics values on this object.
- setCharacteristics(String, WeldAttribType, String) - Method in interface nxopen.weld.WeldPointBuilder
-
Set or edit characteristics for selected points
License requirements: ugweld ("UG WELD")
.
- setCharacteristics2(CharacteristicList) - Method in interface nxopen.routing.ICharacteristic
-
Sets all attributes associated with the titles from the input list,
creating new attributes for the ones that don't exist already.
- setCharacteristicType(SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setCharacteristicValue(int) - Method in interface nxopen.features.shipdesign.generalarrangement.FaceCharacteristicsBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setCharacterSize(double) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setCharacterSize(double) - Method in interface nxopen.preferences.PartVisualizationNamesBorders
-
Sets the character size.
- setCharacterSpacing(double) - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Sets the space between the text characters or symbols as a factor of the character size
License requirements: None.
- setCharactersToSkip(String) - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCharToSkip(String) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setChasePasses(int) - Method in interface nxopen.cam.ThreadCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setChassisCsys(CoordinateSystem) - Method in interface nxopen.motion.TireBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setChassisPoint(Point) - Method in interface nxopen.motion.TireBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCheck(ExamineSteelFeatureBuilderCheck, boolean) - Method in interface nxopen.features.shipdesign.ExamineSteelFeatureBuilder
-
Set the flag to indicate whether or not to examine the specific object type.
- setCheck(ExamineGeometry.Check) - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Set a specified type of check for examine geometry
License requirements: None.
- setCheck - Variable in class nxopen.uistyler.OptionToggle.ItemValueData
-
- setCheckAllComponents(boolean) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCheckBoundaryCondition(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setCheckCircularReference(boolean) - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCheckClearance(boolean) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setCheckClearance(boolean) - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setCheckCollision(boolean) - Method in interface nxopen.tooling.RunSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCheckColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setCheckCriteriaAngle(double) - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
License requirements: None.
- setCheckCriteriaDistance(double) - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
License requirements: None.
- setCheckDof(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setCheckElementGroup(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setCheckElementSizeOption(boolean) - Method in interface nxopen.cae.Mesh3dTetBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCheckers(WeldAdvisorCheckerType[]) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
Sets the checkers be executed
License requirements: ugweld ("UG WELD")
.
- setCheckFluteLength(boolean) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCheckForDuplicates(boolean) - Method in interface nxopen.routing.TransformPathBuilder
-
Sets the flag that indicates whether or not to check for duplicate segments after the copy or transform.
- setCheckFreeEdges(boolean) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCheckGeometryToggle(boolean) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
License requirements: None.
- setCheckingG2Continuity(boolean) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCheckingType(TBSTopologyRestrictAreaBuilder.CheckTypeOption) - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setCheckIpwCollisions(boolean) - Method in interface nxopen.cam.CutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCheckKnuckleStiffener(boolean) - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCheckLabelConflicts(boolean) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCheckLimitViolation(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setCheckLinkCondition(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setCheckMaximumGrowValue(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setCheckMaximumShrinkValue(boolean) - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setCheckName(String) - Method in interface nxopen.validate.RequirementCheck
-
License requirements: None.
- setCheckNeck(boolean) - Method in interface nxopen.cam.CutDepthChecker
-
License requirements: cam_base ("CAM BASE")
.
- setCheckNewerRevisionsOfTemplatePart(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the check for newer revisions of template part option
License requirements: None.
- setCheckNonManifoldEdges(boolean) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCheckOrientation(ElementMaterialOrientationCheckBuilder.MaterialOrientationType, boolean) - Method in interface nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder
-
Sets option value which indicates whether to check for the specified material orientation type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCheckOverlappingToggle(boolean) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
License requirements: None.
- setCheckPartGeometryBeyondTrim(boolean) - Method in interface nxopen.cam.TrimPoint
-
License requirements: cam_base ("CAM BASE")
.
- setCheckPlateIntersectedPlate(boolean) - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCheckPlateIntersectedStiffener(boolean) - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCheckResult(Validation.Result) - Method in interface nxopen.Validation
-
Set the result of validation.
- setCheckScopeOption(CheckScope) - Method in interface nxopen.cae.modelcheck.ISelectionBuilder
-
License requirements: None.
- setCheckSelection(Preferences.CheckSelectionTypes) - Method in interface nxopen.cam.Preferences
-
- setCheckStatus(boolean) - Method in interface nxopen.shipdesign.NavigatorNode
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCheckStiffenerIntersectedStiffener(boolean) - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCheckStock(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setCheckSurfaces(boolean) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCheckSurfaces(boolean) - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- setCheckToolAboveBall(boolean) - Method in interface nxopen.cam.SurfaceContourBuilder
-
License requirements: None.
- setCheckToolAndHolder(boolean) - Method in interface nxopen.cam.GougeCheckBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCheckToolHolder(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setCheckToolLength(boolean) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCheckType(ValidCheckBuilder.CheckingType) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCheckUnconnectedComponent(boolean) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCheckZoneRadius(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Check Zone Radius
License requirements: ugweld ("UG WELD")
.
- setChildCheckerEnabledFlag(String, boolean) - Method in interface nxopen.validate.CheckerNode
-
Sets enable flag of child checker instance in a profile checker.
- setChildCheckerEnabledFlags(String[], boolean[]) - Method in interface nxopen.validate.CheckerNode
-
Sets child checker enable flags in a profile checker.
- setChildComponentsForComponents(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setChildComponentsForDefinitions(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setChildHic1000OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setChildHic1000OutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setChildHic1000OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setChildHic1000OutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setChildHic1700OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setChildHic1700OutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setChildHic1700OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setChildHic1700OutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setChildMembers(UIBlock, UIBlock[]) - Method in interface nxopen.blockstyler.Explorer
-
Sets the parent member for the child members in the Explorer Navigation Tree.
- setChildren(NXObject[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Sets the children
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setChildrenGeomAssociation(boolean) - Method in interface nxopen.cae.ManualNodeAssociationBuilder
-
License requirements: None.
- setChildRevisionOption(AssembliesChildRevisionOptions) - Method in interface nxopen.assemblies.WaveQuery
-
Specifies what child revisions to fetch from Teamcenter
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setChipRemovalIncrementType(CenterlineDrillTurningBuilder.RemovalIncrementTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setChoice(SuppressHoleBuilder.OptionChoice) - Method in interface nxopen.cae.SuppressHoleBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setChoice(BlendStopshortBuilder.Choices) - Method in interface nxopen.geometricutilities.BlendStopshortBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setChooseOptimalMethod(DieEngDefineProductOrientationBuilder.OptimalMethod) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setChoosePartPlugin(CustomManager.ChoosePartPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the choose part plugin.
- setChordal(double) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setChordalOption(JtCreator.ChordalValue) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setChordalTol(double) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setChordalTolerance(double) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setChordalTolerance(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setChordalTolerance(double) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setChuckType(ElectrodeComponentBuilder.Chuck) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setCi(String, UFClone.CheckinData) - Method in interface nxopen.uf.UFClone
-
- setCiCommentChecking(String, boolean, String) - Method in interface nxopen.uf.UFClone
-
- setCirCavityNumber(int) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setCircDeleteAllComponents(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setCircleCenter(Point) - Method in interface nxopen.tooling.WireHoleBuilder
-
License requirements: None.
- setCircleU(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCircleUType(SearchCriteriaFeatureControlFrameBuilder.CircleUOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setCircleUvalue(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCircleUValue(double) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setCircleUValueType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setCircuitColor(NXColor) - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setCircuitColor(double[]) - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
Sets the circuit color.
- setCircular(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCircularBoundary(boolean) - Method in interface nxopen.preferences.DetailViewPreferences
-
Sets the circular boundary option.
- setCircularMotion(int, PathCircularMotion) - Method in interface nxopen.cam.Path
-
Updates the data of the circular motion event at the given index
License requirements: None.
- setCircularMotion(PathEvent, PathCircularMotion) - Method in interface nxopen.cam.Path
-
Updates the data of the circular motion event
License requirements: None.
- setCircularOperation(InsertAuxiliaryBuilder.CircOperationTypes) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setCircularOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCircularOrNonCircular(BurringInsertBuilder.CircularOrNonCircularType) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCircularPrecision(String, double) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the circular precision
License requirements: None.
- setCircularPrecisionFactor(String, double) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the circular precision factor
License requirements: None.
- setCircularScan(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCircularSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- setCircularSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setCircularSlugHole(boolean) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the circular slug hole switch of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setCircularSlugHole(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder
-
Sets the circular slug hole switch of pierce holes
License requirements: ug_die_design ("Die Design")
.
- setCircularTypeMode(SectionSurfaceBuilderEx.CircularType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setCircularVector(Direction) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setCirRadius(double) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setCirRotateAngle(double) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setCirStartAngle(double) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setCladdingDiameter(AmeOpticalConnectionFiberType, double) - Method in interface nxopen.ame.OpticalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setClass4gd(UserDefinedWeldBuilder.WeldTypes) - Method in interface nxopen.weld.UserDefinedWeldBuilder
-
License requirements: ugweld ("UG WELD")
.
- setClassAOption(boolean) - Method in interface nxopen.features.FreeTransformerBuilder
-
License requirements: None.
- setClassId(String) - Method in interface nxopen.mechatronics.SelectClassificationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setClassification(String) - Method in interface nxopen.ame.SelectClassificationFromTreeBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setClassification(ManikinBuilder.ClassificationType) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setClassification(KinematicJunctionBuilder.SystemClass) - Method in interface nxopen.sim.KinematicJunctionBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- setClassificationCode(String) - Method in interface nxopen.ame.db.DocumentStructure
-
Set the Classification Code.
- setClassificationCode(String) - Method in interface nxopen.ame.PageBuilder
-
Set user Classification Code.
- setClassificationObjectIdentifier(String) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Sets the identifier of the classification object associated with the part to place
License requirements: routing_base ("Routing Basic")
.
- setClassificationObjectIdentifier(String) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- setClassificationObjectIdentifierForSpaceReservation(String) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Sets the identifier of the classification object associated with the space reservation part to place
License requirements: routing_base ("Routing Basic")
.
- setClassificationObjectIdentifierForStock(String) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Sets the identifier of the classification object associated with the stock part to place
License requirements: routing_base ("Routing Basic")
.
- setClassificationObjectIdentifierOfCompatibilityPart(ReuseLibrary.PartType, String, Port, Port) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Sets the identifier of the classification object associated with the compatibility part to post place
License requirements: routing_base ("Routing Basic")
.
- setClassificationObjectIdentifierOfPartToPostPlace(String) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Sets the identifier of the classification object associated with the part to be post placed.
- setClassificationOperator(EditClauseBuilder.Operator) - Method in interface nxopen.ame.EditClauseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setClassifiedFeatures(Tag, UFVariant, int) - Method in interface nxopen.uf.UFFbmGeom
-
- setClassifierTypeOfRule(Rule, Classifier.TypeOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setClassName(String) - Method in interface nxopen.ame.SelectClassificationBuilder
-
Sets the class of the name from the reuse library classification
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setClassName(String) - Method in interface nxopen.validate.CheckerNode
-
License requirements: None.
- setClassType(Class) - Method in class nxopen.uf.UFVariant
-
- setClause(String) - Method in interface nxopen.NavigatorFilter
-
- setClauseOperator(EditClauseBuilder.QueryClauseOperatorType) - Method in interface nxopen.ame.EditClauseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCleanBody(boolean) - Method in interface nxopen.features.OptimizeFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCleanup(RoughTurningBuilder.CleanupTypes) - Method in interface nxopen.cam.RoughTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCleanUp(boolean) - Method in interface nxopen.facet.ConvertFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCleanUp(boolean) - Method in interface nxopen.facet.STLImportBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCleanupAssemblyConstraints(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to cleanup assembly constraints.
- setCleanupCAMObjects(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to delete or fix any corrupt
internal CAM objects.
- setCleanupControl(CutParametersCleanupControlTypes) - Method in interface nxopen.cam.TurnCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCleanupDraftingObjects(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to perform drafting cleanup.
- setCleanupFeatureData(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to perform solid cleanup.
- setCleanupMatingData(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to cleanup mating data.
- setCleanupMotionData(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option which determines if the motion cleanup option should be performed.
- setCleanupPartFamilyData(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies if the part family data cleanup should be performed.
- setCleanupPasses(boolean) - Method in interface nxopen.cam.CylinderMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCleanupRoutingData(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option which determines if the routing part cleanup option should be performed.
- setCleanupType(BoundaryTurnMemberFineFinishCorner.Cleanup) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
License requirements: cam_base ("CAM BASE")
.
- setCleanupType(SurfaceContourBuilder.CleanupTypes) - Method in interface nxopen.cam.SurfaceContourBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setClearance(double) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Sets the clearance of the handling core.
- setClearance(double) - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Sets the clearance of handling cores.
- setClearance(double) - Method in interface nxopen.die.PressureSystemChildBuilder
-
Sets the clearance of the pressure system.
- setClearance(double) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the clearance of pressure systems.
- setClearance(double) - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setClearance(AeroJoggleBuilder.SideType, String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the clearance expression.
- setClearance(double) - Method in interface nxopen.tooling.ReliefDesignBuilder
-
License requirements: None.
- setClearanceAutoSet(boolean) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setClearanceBetween(ClearanceAnalysisBuilder.ClearanceBetweenEntity) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setClearanceClacToggle(boolean) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setClearanceCoefficient(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setClearanceCollision(double) - Method in interface nxopen.tooling.RunSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setClearanceColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setClearanceDistance(double) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setClearanceDistance(double) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setClearanceGeometryType(ClearanceBuilder.ClearanceGeometryTypes) - Method in interface nxopen.die.ClearanceBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setClearancePlane(NXObject) - Method in interface nxopen.cam.ToolPathDivideBuilder
-
License requirements: None.
- setClearanceSetName(String) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setClearanceTolerance(double) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setClearanceType(NcmClearanceBuilder.ClearanceTypes) - Method in interface nxopen.cam.NcmClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setClearanceValue(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setClearanceValues(double[]) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Set the clearance values for the components used in the clearance analysis.
- setClearPlaneData(Tag, double[], double[]) - Method in interface nxopen.uf.UFCam
-
- setClearPlaneStatus(Tag, UFParam.ClrplaneStatus) - Method in interface nxopen.uf.UFCam
-
- setClearPlaneTag(Tag, Tag) - Method in interface nxopen.uf.UFCam
-
- setClearPlaneUsage(Tag, UFParam.ClrplaneUsage) - Method in interface nxopen.uf.UFCam
-
- setClientDataWithSelectedItem(String, String) - Method in interface nxopen.tooling.MoldFillingBuilder
-
Gets selected part data, and assign it to standard part client data.
- setClientType(SignalMappingBuilder.AppOption) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCliffEdges(ScCollector) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCliffProjectOntoSecondWall(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setClipCoplanarObjects(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setClipCoplanarObjectsForLightweightSectionViews(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setClipOrdinateDimensionLine(boolean) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the clipping of the dimension line to the ordinate origin at the view border
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setClipOrdinateDimensionLine(boolean) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Sets the clipping of the dimension line to the ordinate origin at the view border
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setClippingEndPoint(Point) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder
-
License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.
- setClippingSide(PointCloudClippingBoxesListItemBuilder.ClippingSides) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder
-
License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.
- setClippingStartPoint(Point) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder
-
License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.
- setClipType(DynamicSectionTypes.Clip) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setClipValue(double) - Method in interface nxopen.cae.ClippingParameters
-
Set clip value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setClipViewBoundary(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setClipWireframeObjects(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setClipWireframeObjects(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setClockIncrement(double) - Method in interface nxopen.routing.Port
-
The clock angle increment value of
Port
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- setClockIncrementObject(Expression) - Method in interface nxopen.routing.Port
-
License requirements: routing_base ("Routing Basic")
.
- setClockType(PatternClockingBuilder.ClockingType) - Method in interface nxopen.geometricutilities.PatternClockingBuilder
-
License requirements: None.
- setClone(boolean) - Method in interface nxopen.tooling.ClonePart
-
License requirements: None.
- setClonedProductName(String) - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
License requirements: None.
- setCloneMethod(ToolingClonemethod) - Method in interface nxopen.tooling.CloneObject
-
License requirements: None.
- setCloneMethod(int) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Set clone method.
- setCloneObject(CloneObject) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the clone operation object
License requirements: None.
- setCloneObject(CloneObject) - Method in interface nxopen.tooling.MoldFillingBuilder
-
Sets clone client data.
- setCloneRelatedCae(UFClone.CloneRelCae) - Method in interface nxopen.uf.UFClone
-
- setCloneRelatedDwgs(boolean) - Method in interface nxopen.uf.UFClone
-
- setCloneUnitToggle(boolean) - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
Sets the flip gun direction
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setClose(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setClosed(boolean) - Method in interface nxopen.facet.CreateTransitionBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setClosed(boolean) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setClosed(boolean) - Method in interface nxopen.features.SpineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setClosed(boolean) - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setClosed(boolean) - Method in interface nxopen.SketchEllipseBuilder
-
License requirements: None.
- setClosedBSpline(boolean) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setClosedCornerDiameter(String) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
License requirements: None.
- setClosedCornerType(MiterOptions.ClosedCornerTypeOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Sets the closed corner option type.
- setClosedCurve(boolean) - Method in interface nxopen.cae.NodesOnCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setClosedCurve(boolean) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setClosedInV(boolean) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setClosedStartOrientation(IOrientation) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the closed start orientation of the draw die punch casting.
- setClosedVolumeToggle(boolean) - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
License requirements: None.
- setCloseGaps(WrapGeometryBuilder.CloseGapType) - Method in interface nxopen.features.WrapGeometryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCloseGaps(SinumerikCaSimplifyBodiesBuilder.CloseGapTypes) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setCloseProfileRule(SmartVolumeProfileBuilder.CloseProfileRuleType) - Method in interface nxopen.geometricutilities.SmartVolumeProfileBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setClosestImprintOption(boolean) - Method in interface nxopen.cae.ImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setClosureType(ClosedCornerBuilder.ClosureTypeOptions) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setClrSetName(String) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setClrZone(double) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setClsfData(boolean) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setClsfDecimals(int) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setClsfForceLoadTurret(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setCmpPostExportPlugin(CustomManager.ImportExportPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin called just after Routing exports an CMP file.
- setCmpPreImportPlugin(CustomManager.ImportExportPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin called before importing an CMP file.
- setCncOption(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setCncTemplate(EWDraftingBuilder.CNCTemplateOption) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setCncTemplateName(String) - Method in interface nxopen.tooling.EWDraftingBuilder
-
The template name of cnc sheet type to create drafting.
- setCo(String, UFClone.CheckoutData) - Method in interface nxopen.uf.UFClone
-
- setCoarsePrecision(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setCoaxialEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setCodecFourcc(String) - Method in interface nxopen.MovieSettingsBuilder
-
License requirements: None.
- setCoefficientCSYS(CoordinateSystem) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setCoefficientDefinitionMethod(DDAMExcitation.CoefficientDefinitionType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setCoefficientFile(String) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setCoefficientFunction(Function) - Method in interface nxopen.motion.DamperBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCoefficientFunction(Function) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCoefficientsType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setCoefficientType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.DamperBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCoefficientType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCoincident(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setCoincident(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCoincidentEdgeCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCoincidentVertex2dComponentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCoincidentVertexEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCoincidentVertexSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setColinearThreshold(double) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setCollaborativeDesign(CollaborativeDesign) - Method in interface nxopen.assemblies.SubsetBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setCollaborativeDesign(CollaborativeDesign) - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setCollaborativeDesign(CollaborativeDesign) - Method in interface nxopen.pid.FileNewApplicationBuilder
-
- setCollapseState(boolean) - Method in interface nxopen.uistyler.CollapsibleGroup
-
License requirements: None.
- setCollarPlateCreationApproach(ProfileCutoutBuilder.CollarPlateCreationApproaches) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setCollectionOneRange(ClearanceAnalysisBuilder.CollectionRange) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setCollectionPlaneType(SearchCriteriaFeatureControlFrameBuilder.CollectionPlaneOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setCollectionTwoRange(ClearanceAnalysisBuilder.CollectionRange) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setCollector(ScCollector) - Method in interface nxopen.ExpressionCollectorSet
-
License requirements: None.
- setCollectorName(String) - Method in interface nxopen.cae.ElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCollectorName(String) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCollectorName(String) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCollectorName(String) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCollectorName(String) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCollectorName(String) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setCollectorName(String) - Method in interface nxopen.cae.MeshCollectorBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCollectorName(String) - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCollectorName(String) - Method in interface nxopen.cae.SpiderElementBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCollinear(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setCollinear(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCollinear2dComponentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCollinearEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCollinearSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCollinearTolerance(double) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCollisionAvoidanceEnum(InspectionLinkPmiBuilder.CollisionAvoidanceEnumType) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCollisionCheck(boolean) - Method in interface nxopen.cam.HoleMachiningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCollisionCheck(LaserProfileMove.CollisionChecks) - Method in interface nxopen.cam.LaserProfileMove
-
License requirements: cam_base ("CAM BASE")
.
- setCollisionCheck(boolean) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setCollisionCheck(boolean) - Method in interface nxopen.cam.NcmOptimizeGroup
-
License requirements: cam_base ("CAM BASE")
.
- setCollisionCheck(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCollisionCheck(boolean) - Method in interface nxopen.cam.NcmScBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCollisionCheckOption(RunSimulationBuilder.CollisionCheckOptions) - Method in interface nxopen.tooling.RunSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCollisionClearance(double) - Method in interface nxopen.cam.CollisionPairBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCollisionEnable(boolean) - Method in interface nxopen.cam.CollisionPairBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCollisionFactor(double) - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCollisionFlag(ProbeProtectedParametersBuilder.CollisionFlagTypes) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCollisionMaterial(CollisionMaterial) - Method in interface nxopen.mechatronics.ChangeMaterialBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCollisionMaterial(CollisionMaterial) - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCollisionObject(NXObject) - Method in interface nxopen.routing.TransformPathBuilder
-
Sets collision object during the preview
License requirements: routing_base ("Routing Basic")
.
- setCollisionPairIndex(int) - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setCollisionPrecision(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setCollisionProperties(CollisionBodyBuilder.ShapePropertyTypes) - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCollisionSensor(CollisionSensor[]) - Method in interface nxopen.mechatronics.ObjectSinkBuilder
-
Sets the collision sensor object.
- setCollisionShape(CollisionBodyBuilder.CollisionShapeTypes) - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCollisionShape(CollisionSensorBuilder.CollisionShapeTypes) - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCollshape(SimulationOptionsBuilder.ToolShapeColl) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setColor(NXColor) - Method in interface nxopen.annotations.AutomaticCenterlineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.annotations.CenterlineSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(int) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
License requirements: geometric_tol ("GDT")
.
- setColor(NXColor) - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.annotations.HatchBuilder
-
- setColor(NXColor) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.annotations.IntersectionSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.annotations.TargetPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(int) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.cae.xyplot.ICurveDisplaySettings
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.cae.xyplot.ScatterStyleSetting
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setColor(UnknownResultColor) - Method in interface nxopen.cae.xyplot.UnknownResultScaleStyle
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.display.SectionCurveSettingsBuilder
-
License requirements: None.
- setColor(int) - Method in interface nxopen.display.TransientText
-
Sets the index of the color to be used to display the transient text.
- setColor(int) - Method in interface nxopen.DisplayableObject
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setColor(NXColor) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setColor(String, ShipbuildingLinesViewStyle.Lines, int) - Method in interface nxopen.drawings.ShipbuildingLinesViewStyle
-
The color of ship line.
- setColor(String, ShipDraftingViewLinesViewStyle.Lines, NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesViewStyle
-
The color of ship line.
- setColor(NXColor) - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(NXColor) - Method in interface nxopen.features.ColorFaceBuilder
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.features.ColorFeatureBuilder
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.features.ColorFeatureGroupBuilder
-
License requirements: None.
- setColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setColor(NXColor) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setColor(NXColor) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setColor(int) - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColor(int) - Method in interface nxopen.mechatronics.DisplayChangerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setColor(NXColor) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setColor(int) - Method in interface nxopen.preferences.PartDrafting
-
Sets the color of the retained
Annotation
objects.
- setColor(PartObject.ObjectType, int) - Method in interface nxopen.preferences.PartObject
-
Sets the color.
- setColor(String, ShipbuildingLinesViewPreferences.Lines, int) - Method in interface nxopen.preferences.ShipbuildingLinesViewPreferences
-
The color of ship line.
- setColor(String, ShipDraftingViewLinesViewPreferences.Lines, int) - Method in interface nxopen.preferences.ShipDraftingViewLinesViewPreferences
-
The color of ship line.
- setColor(int, int, String, double[]) - Method in interface nxopen.uf.UFDisp
-
- setColor(Tag, int) - Method in interface nxopen.uf.UFObj
-
- setColor(NXColor.Rgb) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setColor3Value(double[]) - Method in interface nxopen.display.CgfxAttributeValueColor3Builder
-
- setColor4Value(double[]) - Method in interface nxopen.display.CgfxAttributeValueColor4Builder
-
- setColorAndLayers(boolean) - Method in interface nxopen.Step203Creator
-
- setColorAndLayers(boolean) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setColorApproach(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setColorAttribute(int) - Method in interface nxopen.cae.AttributeSelectionRecipe
-
Sets or adds the color attribute.
- setColorBy(PathDisplay.ColorByType) - Method in interface nxopen.cam.PathDisplay
-
License requirements: None.
- setColorControlType(IpwAnalysisBuilder.ColorControl) - Method in interface nxopen.cam.IpwAnalysisBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setColorDepthPass(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setColorDraftAngleFailure(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setColorDraftAnglePass(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setColorDraftAngleWarning(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setColorEntryExit(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setColorFailure(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setColorIndex(int) - Method in interface nxopen.ColorDefinition
-
License requirements: None.
- setColorInsideNegative(double[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Sets the negative inside color
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setColorInsidePositive(double[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Sets the positive inside color
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setColorLegendOption(FaceAnalysisDisplayBuilder.ColorLegendOptions) - Method in interface nxopen.geometricanalysis.FaceAnalysisDisplayBuilder
-
License requirements: None.
- setColorLine(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setColorMapDisplayed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setColorMeasurePoint(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setColorMode(ImageBaseBuilder.ImageColorModes) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setColorModified(boolean) - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
Sets the color value modified or not.
- setColorName(String) - Method in interface nxopen.ColorDefinition
-
License requirements: None.
- setColorName(String) - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Sets the color name.
- setColorName(String) - Method in interface nxopen.tooling.ColorExpressionsBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setColorOfBackgroundPlane(NXColor) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
License requirements: None.
- setColorOfGroupLabel(GroupLabel, NXColor.Rgb) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setColorOption(BarColorOption) - Method in interface nxopen.cae.xyplot.BarStyle3DSetting
-
License requirements: None.
- setColorOption(PlateColorOption) - Method in interface nxopen.cae.xyplot.PlateStyle3DSetting
-
- setColorOption(SurfaceColorOption) - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
-
License requirements: None.
- setColorOption(SectionCurveSettingsBuilder.ColorOptionType) - Method in interface nxopen.display.SectionCurveSettingsBuilder
-
License requirements: None.
- setColorOption(ShipDesignPreferencesBuilder.ColorType) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setColorOption(DynamicSectionTypes.CurveColorOption) - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColorOutsideNegative(double[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Sets the negative outside color
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setColorOutsidePositive(double[]) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Sets the positive outside color
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setColorPicker(double[]) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
Sets the color picker
License requirements: studio_render ("UG STUDIO RENDER")
.
- setColorPicker(NXColor) - Method in interface nxopen.tooling.ColorExpressionsBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setColorPicker(NXColor) - Method in interface nxopen.tooling.MWCopySheetsBuilder
-
License requirements: None.
- setColorPicker(NXColor) - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setColorPlotType(DeviationGaugeBuilder.ColorPlotTypes) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setColorRetract(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setColors(CGMBuilder.Color) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setColors(PlotColorsWidthsBuilder.Color) - Method in interface nxopen.PlotColorsWidthsBuilder
-
License requirements: None.
- setColors(PrintPDFBuilder.Color) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setColors(UFSf.ColorAttr) - Method in interface nxopen.uf.UFSfLegend
-
- setColorSaturation(double) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setColorSaturation(double) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setColorsOnMeshes() - Method in interface nxopen.cae.ModelDisplayBuilder
-
This method will set the colors from the current element color cycler
on all of the meshes in the model.
- setColorTransition(NXColor) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setColorValue(int[]) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
Sets line color values
License requirements: None.
- setColorValue(int[]) - Method in interface nxopen.blockstyler.TextColorFontWidth
-
Sets text color values
License requirements: None.
- setColorValue(double, double, double) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Sets the value of patch surface color.
- setColorValue(double, double, double) - Method in interface nxopen.tooling.TrimRegionBuilder
-
Sets the value of surface patch color.
- setColorValues(ColorDefinitionRgb) - Method in interface nxopen.ColorDefinition
-
Sets the color values.
- setColorWarning(NXColor) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setColorXAxis(NXColor) - Method in interface nxopen.cae.DisplayNodalCsysBuilder
-
Sets the color for direction one
License requirements: None.
- setColorYAxis(NXColor) - Method in interface nxopen.cae.DisplayNodalCsysBuilder
-
Sets the color for direction two
License requirements: None.
- setColorZAxis(NXColor) - Method in interface nxopen.cae.DisplayNodalCsysBuilder
-
Sets the color for direction three
License requirements: None.
- setColPrefs(Tag, UFPlist.ColPrefs) - Method in interface nxopen.uf.UFPlist
-
- setColumn(int) - Method in interface nxopen.blockstyler.Group
-
License requirements: None.
- setColumnBaseTypeEnum(ColumnGridEquipmentBuilder.ColumnBaseType) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the column base type of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setColumnCount(int) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setColumnCount(int) - Method in interface nxopen.ITableEditorDataProvider
-
Sets the number of columns in the table
License requirements: None.
- setColumnDisplayIDs(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the status of column display ids in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setColumnDisplayText(int, String) - Method in interface nxopen.blockstyler.Node
-
Sets the text in the column which corresponds to given columnId.
- setColumnDisplayType(int, Tree.ColumnDisplay) - Method in interface nxopen.blockstyler.Tree
-
Sets the display type of the column.
- setColumnHeadCfw(Tag, Tag, int[]) - Method in interface nxopen.uf.UFTabnot
-
- setColumnLabels(String[]) - Method in interface nxopen.blockstyler.SetList
-
Sets the ColumnLabels
License requirements: None.
- setColumnModes(Tag, int, int, int) - Method in interface nxopen.uf.UFPlist
-
- setColumnNumber(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setColumnOrder(BendTableSettingsBuilder.ColumnType[]) - Method in interface nxopen.annotations.BendTableSettingsBuilder
-
Sets the order of the columns in the bend table
License requirements: drafting ("DRAFTING")
.
- setColumnOriginPoint(Point) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Sets the column origin point is returns where colums is created
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setColumnResizePolicy(int, Tree.ColumnResizePolicy) - Method in interface nxopen.blockstyler.Tree
-
Sets the column resize policy.
- setColumnRotate90Degrees(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the status of 90 degree column rotation for column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setColumnSortable(int, boolean) - Method in interface nxopen.blockstyler.Tree
-
Sets the flag indicating whether the column is sortable.
- setColumnSortData(Tag, UFTabnot.SortData) - Method in interface nxopen.uf.UFTabnot
-
- setColumnSortHandler(Tree.ColumnSortCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the column sort callback.
- setColumnSortOption(int, Tree.ColumnSortOption) - Method in interface nxopen.blockstyler.Tree
-
Sets the column sort option.
- setColumnSpacingDouble(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the spacing between columns
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setColumnStyleEnum(ColumnFeatureBuilder.ColumnType) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Sets the column style of column feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setColumnTitle(int, String) - Method in interface nxopen.blockstyler.Tree
-
Sets the column title.
- setColumnTitles(String) - Method in interface nxopen.blockstyler.DoubleTable
-
License requirements: None.
- setColumnTitles(String) - Method in interface nxopen.blockstyler.IntegerTable
-
License requirements: None.
- setColumnTitles(String[]) - Method in interface nxopen.cae.xyplot.LegendTableStyle
-
Sets the legend table column titles
License requirements: None.
- setColumnTypeEnum(ColumnGridEquipmentBuilder.ColumnType) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the column type of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setColumnVisible(int, boolean) - Method in interface nxopen.blockstyler.Tree
-
Sets the flag indicating whether the column is visible
License requirements: None.
- setColumnWideNumber(int) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the number of column of columns in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setColumnWidth(double) - Method in interface nxopen.annotations.TableSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setColumnWidth(int, int) - Method in interface nxopen.blockstyler.Tree
-
Sets the column width
License requirements: None.
- setColumnWidth(Tag, double) - Method in interface nxopen.uf.UFTabnot
-
- setColumnWidths(int[]) - Method in interface nxopen.blockstyler.SetList
-
Sets the ColumnWidths
License requirements: None.
- setColumnWidths(double[]) - Method in interface nxopen.openxml.TableDocumentData
-
Sets the width array of the columns
License requirements: None.
- setCombDensity(int) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setCombinationHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCombinationMethod(CombinationEvaluationOptions.MultipleExcitationCombinationMethod) - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setCombineAcross(boolean) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCombineAcrossEntities(boolean) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCombineAcrossIteration(boolean) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCombineBody(boolean) - Method in interface nxopen.cae.Mesh0dBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCombineConnectedJoints(boolean) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setCombinedValue(ResultProbeBuilder.CombineAcrossEntities) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCombineIterOption(ResultProbeBuilder.CombineAcrossIterations) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCombineOption(boolean) - Method in interface nxopen.features.TrimAndExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCombineRibWithTarget(boolean) - Method in interface nxopen.features.RibBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCombineValueFromEntitiesOption(PostGraphAcrossIterationsBuilder.CombinationMethod) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCombInterneedleDensity(int) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setCombMaxLength(double) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setComboOptions(double[]) - Method in interface nxopen.blockstyler.DoubleBlock
-
Sets the ComboOptions
License requirements: None.
- setComboOptions(int[]) - Method in interface nxopen.blockstyler.IntegerBlock
-
Sets the ComboOptions
License requirements: None.
- setCombScaleFactor(double) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setCommandType(InspectionCmmCommandBuilder.CommandTypes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setComment(String) - Method in interface nxopen.issue.IssueContent
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setComment(String) - Method in interface nxopen.issue.IssueContentBuilder
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setComment(String) - Method in interface nxopen.markup.MarkupObject
-
License requirements: None.
- setCommission(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCommon(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setCommonFacesSearched(boolean) - Method in interface nxopen.features.SewBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCommonSlugHole(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder
-
Sets the common slug hole switch of pierce holes
License requirements: ug_die_design ("Die Design")
.
- setCommonZone(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCommunicationInterval(Expression) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCommunicationIntervalType(MechatronicsBuilder.SolverCommunicationIntervalType) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setComp(Result.Component) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setComp1(ComponentData) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setComp2(ComponentData) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setComp3(ComponentData) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCompanionResultName(String) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
- setCompanionResultReference(SimResultReference) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
- setCompanionResultsFile(String) - Method in interface nxopen.cae.CompanionResultBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCompanionSolution(SimSolution) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
- setCompany(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setCompany(String) - Method in interface nxopen.Step203Creator
-
- setCompany(String) - Method in interface nxopen.Step214Creator
-
- setCompany(String) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setCompanyAddress(String[]) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
-
Sets the company address
License requirements: None.
- setCompanyName(String) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
-
License requirements: None.
- setCompareEmphasizeMode(CompareModeBuilder.CompareMode) - Method in interface nxopen.features.shipdesign.CompareModeBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setCompareMethod(TrackDrawingChangesGeneralBuilder.CompareMethodType) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCompareMethodType(VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsMethodType) - Method in interface nxopen.drawings.VisualDrawingComparePrefsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCompareObject(TaggedObject) - Method in interface nxopen.features.shipdesign.FilterBuilder
-
License requirements: None.
- setCompareTolerance(double) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setCompareTolerance(double) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCompareTypesEnum(CompareRunsBuilder.CompareTypes) - Method in interface nxopen.routing.CompareRunsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setCompareValue(String) - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCompatibleVersion(TiaPortalProjectSettingsBuilder.TiaPortalVersionType) - Method in interface nxopen.ame.TiaPortalProjectSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCompensationNumber(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCompensationPartNumber(String) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
The selection compensation
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setCompensationType(PenetrationRequest.CompensationType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setCompFactor(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setComplementAngleFlag(boolean) - Method in interface nxopen.features.AngularDimBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setComplex(Result.Complex) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setComplexCriterion(Result.Complex) - Method in interface nxopen.cae.CrossSectionParameters
-
Set complex criteria
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setComplexCriterion(Result.Complex) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setComplexCriterion(Result.Complex) - Method in interface nxopen.cae.ResultParameters
-
Set complex criteria
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setComplexData(double[], double[], double[]) - Method in interface nxopen.cae.AfuData
-
Set the XY Data of an AFU record when the ordinate type is Complex
License requirements: None.
- setComplexData(double, double, double[], double[]) - Method in interface nxopen.cae.AfuData
-
Set the XY Data of an AFU record when the ordinate type is Complex
License requirements: None.
- setComplexData(double[], double[], double[]) - Method in interface nxopen.cae.ftk.ArrayRecord2D
-
Sets complex points data
License requirements: None.
- setComplexGraphTypes(ComplexOption2D) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setComplexOption(ComplexOption2D) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D
-
License requirements: None.
- setComplexOption(ComplexOption2DBarChart) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2DBarChart
-
License requirements: None.
- setComplexOption(ComplexOption2DColorContour) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2DColorContour
-
License requirements: None.
- setComplexOption(ComplexOption3D) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles3D
-
License requirements: None.
- setComplexOption(int) - Method in interface nxopen.cae.xyplot.PlotParameters
-
License requirements: None.
- setComplexScalarFieldWrapperPropertyValue(String, ComplexScalarFieldWrapper) - Method in interface nxopen.BasePropertyTable
-
- setComplexVectorFieldWrapperPropertyValue(String, ComplexVectorFieldWrapper) - Method in interface nxopen.BasePropertyTable
-
- setCompName(String) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setCompName(String) - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setCompName(String) - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setComponent(Result.Component) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setComponent(Result.Component) - Method in interface nxopen.cae.PostJtExportBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setComponent(Component) - Method in interface nxopen.mechatronics.ElectricalPart
-
- setComponent(ControlInputPortBuilder.MeasuredComponent) - Method in interface nxopen.motion.ControlInputPortBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setComponent(GraphBuilder.ComponentChoices) - Method in interface nxopen.motion.GraphBuilder
-
- setComponentAnchor(InterfaceObject) - Method in interface nxopen.assemblies.AddComponentBuilder
-
Sets the component anchor to be used for adding component
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setComponentBasedMechanism(boolean) - Method in interface nxopen.motion.MotionEnvironment
-
Sets component based mechanism
License requirements: mechanisms ("MECHANISMS")
.
- setComponentCam(CreateNewComponentBuilder.ComponentCamType) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: None.
- setComponentEndAState(DamperEADBuilder.State) - Method in interface nxopen.cae.DamperEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setComponentEndAState(SpringEADBuilder.State) - Method in interface nxopen.cae.SpringEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setComponentEndBState(DamperEADBuilder.State) - Method in interface nxopen.cae.DamperEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setComponentEndBState(SpringEADBuilder.State) - Method in interface nxopen.cae.SpringEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setComponentHandleToPoint() - Method in interface nxopen.tooling.AddReusablePart
-
Keep the reusable component handle information into its associated pattern point
License requirements: None.
- setComponentLayer(int) - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setComponentLayerOptionType(ReplaceComponentBuilder.ComponentLayerOption) - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setComponentLoadMethod(LoadOptions.LoadMethod) - Method in interface nxopen.LoadOptions
-
Sets the option indicating what method to use to determine where to
find component parts to load
License requirements: None.
- setComponentMatchColumnHeading(String) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the column name of the component list used for component matching
if the method is attribute matching.
- setComponentMatchComponentAttributeTitle(String) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the component attribute name used for component matching
if the method is attribute matching.
- setComponentMatchMethod(RoutingElectrical.ComponentMatchType) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the component match option for automatic/manual component assignment.
- setComponentMatrix(Matrix3x3) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setComponentMemberSelect(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the component member select option
License requirements: None.
- setComponentMethod(PmiFilter.ComponentMethod) - Method in interface nxopen.annotations.PmiFilter
-
Sets the component method of the PMI filter.
- setComponentName(String) - Method in interface nxopen.assemblies.AddComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setComponentName(String) - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setComponentName(String) - Method in interface nxopen.cae.connections.ComponentData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setComponentName(String) - Method in interface nxopen.cam.RobotMountMove
-
License requirements: cam_base ("CAM BASE")
.
- setComponentName(String) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setComponentName(String) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setComponentName(String) - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Sets the component name.
- setComponentNameType(ReplaceComponentBuilder.ComponentNameOption) - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setComponentOrigin(CreateNewComponentBuilder.ComponentOriginType) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setComponentParameter(String, IrayPlusMaterialAttribute) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
Sets attribute object for specific fomatted attribute name
The string attribute name format should be :
"layer name-interface name-attribute name"
Let material ''Varnished Cherry' for example:
If user wants to set 'Base' component's attribueObject of 'Base-Colour-Colour'.
- setComponentParameterValue(String, String) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
Sets attribute value for specific fomatted attribute name
The string attribute name format should be :
"layer name-interface name-attribute name"
Let material ''Varnished Cherry' for example:
If user wants to set 'Base' component's value of 'Base-Colour-Colour'.
- setComponentPatternBuilder(ComponentPatternBuilder) - Method in interface nxopen.tooling.AddReusablePart
-
License requirements: None.
- setComponentPatternBuilder(ComponentPatternBuilder) - Method in interface nxopen.tooling.FastenerAssy
-
License requirements: None.
- setComponentProperties(String, String, int) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the reusable component properties
License requirements: None.
- setComponentReferenceSetType(ReplaceComponentBuilder.ComponentReferenceSet, String) - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Set the reference set
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setComponents(Component[]) - Method in interface nxopen.annotations.PmiFilter
-
Sets the components associated with the PMI filter.
- setComponents(ComponentData[]) - Method in interface nxopen.cae.connections.ComposerData
-
Sets components.
- setComponentsCreation(boolean) - Method in interface nxopen.features.DatumCsysBuilder
-
- setComponentStatus(Excitation.Component, boolean) - Method in interface nxopen.cae.responsesimulation.DDAMExcitationBuilder
-
Sets the status for a direction component
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setComponentsToLoad(LoadOptions.LoadComponents) - Method in interface nxopen.LoadOptions
-
Sets the option indicating what component parts to load during part open.
- setComponentToReplace(int, Component) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the selected component to replace
License requirements: None.
- setComponentType(MotionSensorBuilder.Component) - Method in interface nxopen.motion.MotionSensorBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setComponentType(AddReusablePart.ComponentMode) - Method in interface nxopen.tooling.AddReusablePart
-
License requirements: None.
- setComponentType(CompDrawingBuilder.ComponentTypeSelection) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setComposerData(ComposerData) - Method in interface nxopen.cae.connections.Composer
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setComposite(boolean) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCompositeDrf(Tag, UFGdt.Precedence) - Method in interface nxopen.uf.UFGdt
-
- setCompositeInsert(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCompositeToleranceValueSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCompound(boolean) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCompoundGeometryRelationScope(int) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCompoundWeldSize(String) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCompoundWeldSizeCode(LineWeldDataBuilder.WeldSizeCodeType) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCompressionFlags(Tag, UFPart.CompressFlags) - Method in interface nxopen.uf.UFPart
-
- setCompressPart(boolean) - Method in interface nxopen.PartSaveOptions
-
Sets the option indicating whether solid data within part files
will be compressed as it is saved to disk
License requirements: None.
- setCompSectionInView(Tag, Tag, UFDraw.CompSectionInView) - Method in interface nxopen.uf.UFDraw
-
- setComputationalTimeUserAttribute(Tag, String, int, int[], boolean) - Method in interface nxopen.uf.UFAttr
-
- setComputationScope(ElementEdgeCheckBuilder.Scope) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setComputationType(Result.ComputationType) - Method in interface nxopen.cae.ResultParameters
-
Set computing type.
- setComputedSize(double) - Method in interface nxopen.annotations.Dimension
-
- setComputeOnVisible(boolean) - Method in interface nxopen.cae.ResultParameters
-
Exclude or include elements which are not visible for Averaging, Summing, Gap/Discontinuity calculations
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setConcaveCorners(BoundaryTurnMemberSet.ConcaveCornersTypeValue) - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setConcaveRadius(double) - Method in interface nxopen.facet.CurvatureBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setConcentric(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setConcentric(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setConcentric2dComponentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setConcentricEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setConcentricSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setConceptDesign(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setConceptDesign(boolean) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setConceptDesign(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setConceptDesign(boolean) - Method in interface nxopen.tooling.StandardPartBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR ug_die_design ("Die Design")
.
- setConceptPart(String) - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCondition(Expression) - Method in interface nxopen.ame.ConditionsBuilder
-
Set the condition for the rule
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCondition(SimCondition) - Method in interface nxopen.cae.SimConditionTimeStep
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCondition(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCondition(PackagingMeasureBuilder.MeasureCondition) - Method in interface nxopen.motion.PackagingMeasureBuilder
-
- setCondition(String) - Method in interface nxopen.sim.Breakpoint
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setConditionId(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConditionOption(ExternalConnectionElementBuilder.ConditionType) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConditionSequences(SimConditionSequence[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set Condition Sequences to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setConditionValue(double) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConditionValue(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConductorCount(int) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Sets the count of conductors.
- setConduitPartNumber(String) - Method in interface nxopen.routing.electrical.CableDevice
-
Sets the part number of the conduit to be applied over this
CableDevice
object.
- setConeAngle(double) - Method in interface nxopen.display.LightBuilder
-
License requirements: None.
- setConeColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Sets the cone color
License requirements: None.
- setConectionType(ConnectionCreatorBuilder.ConnectionType) - Method in interface nxopen.linedesigner.ConnectionCreatorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConeheadAttrb(UFDisp.ConeheadAttrbSTag) - Method in interface nxopen.uf.UFDisp
-
- setConfidenceLevel(double) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setConfidenceLevelOption(LaminateRandomEventBuilder.ConfidenceLevelOptionEnum) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setConfigAttribute(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setConfigDetail(ConfigurationContextBuilder.ConfigurationDetail) - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setConfigFile(String) - Method in interface nxopen.features.shipdesign.FrameBarOutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setConfigFile(String) - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setConfigFile(String) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setConfigName(String) - Method in interface nxopen.cae.PreTestExciterConfig
-
License requirements: nx_correl_base ("FE Correlation")
.
- setConfigRule(String) - Method in interface nxopen.uf.UFUgmgr
-
- setConfigType(ConfigurationContextBuilder.ConfigContextType) - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setConfiguration(int) - Method in interface nxopen.cam.RobotCartesianMove
-
License requirements: cam_base ("CAM BASE")
.
- setConfiguration(InitProjectBuilder.ConfigurationId) - Method in interface nxopen.tooling.InitProjectBuilder
-
License requirements: None.
- setConfigurationData(String, String, String, String, String, int) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Sets details of the configuration data.
- setConfigurationFile(String) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setConfigurationFile(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setConfigurationFile(String) - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setConfigurationName(String) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConfigurationPart(NXObject) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConfirmBranchSelection(RoutingPath.ConfirmBranchSel) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setConfirmUndo(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the confirm undo flag
License requirements: None.
- setConfirmWarningMessages(boolean) - Method in interface nxopen.weld.WeldImportBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setConflictingColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch conflicting color
License requirements: None.
- setConflictLogicalObject(LogicObject) - Method in interface nxopen.mechatronics.ComparisonResult
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConformToSurface(boolean) - Method in interface nxopen.annotations.RegionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setConicalFunction(Function) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setConicalFunction(Function) - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setConicalType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setConicalType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setConicMethod(ConicCrossSection.DefineMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setConicTypeMode(SectionSurfaceBuilderEx.ConicType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setConnectableProxyObjectType(PortBuilder.ConnectableAttrProxyObjectType) - Method in interface nxopen.ame.PortBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setConnectAngle(double) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setConnectAngle(double) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setConnectedCurve(NXObject[]) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder
-
Set the connected curve which the attachment will move along
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectedCurves(NXObject[]) - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder
-
Set the connected curves which the attachment will move along
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectedObject(NXObject) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setConnectedPanelType(JointmarkBuilder.ConnectedPanelTypes) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setConnectedPartAttributes(String[]) - Method in interface nxopen.weld.ExportWeldBuilder
-
Set the connected part attributes of weld points
License requirements: ugweld ("UG WELD")
.
- setConnectedPartAttrToggle(boolean) - Method in interface nxopen.weld.ExportWeldBuilder
-
License requirements: ugweld ("UG WELD")
.
- setConnectedPartMethod(TransformBuilder.ConnectedPartMethods) - Method in interface nxopen.weld.TransformBuilder
-
License requirements: ugweld ("UG WELD")
.
- setConnectedToInformation(boolean) - Method in interface nxopen.weld.InformationBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setConnectingOnlyOnePart(boolean) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets
License requirements: ugweld ("UG WELD")
.
- setConnection(Pipe, String) - Method in interface nxopen.pid.FlowDirectionArrowBuilder
-
Sets the connection for this Flow Direction Arrow.
- setConnection(ConnectionEndType, Pipe, String) - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
To set the connection connecting to the OSC sheet element.
- setConnectionDBData(ConnectionDBData) - Method in interface nxopen.cae.connections.Composer
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setConnectionDBItemDatas(ConnectionDBItemData[]) - Method in interface nxopen.cae.connections.ConnectionDBData
-
Sets connection DB item datas.
- setConnectionDirection(NXObject) - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Sets the connection direction
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setConnectionDirection(AttributeHolder, Point2d) - Method in interface nxopen.diagramminglibraryauthor.PortDataBuilder
-
Sets the connection direction
License requirements: None.
- setConnectionInformation(String, Part, String, int, String, int, int, double, TCPClientBuilder.Signal[]) - Method in interface nxopen.mechatronics.TCPClientBuilder
-
Sets TCP connection information
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectionInformation(String, String, int, String, int, int, int, double, TCPSignalServerBuilder.Signal[]) - Method in interface nxopen.mechatronics.TCPSignalServerBuilder
-
Sets connection information
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectionInformation(String, Part, int, String, int, String, int, String, int, int, double, UDPSignalClientBuilder.Signal[]) - Method in interface nxopen.mechatronics.UDPSignalClientBuilder
-
Sets UDP connection information
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectionInformation(String, int, String, int, String, int, String, int, int, double, UDPSignalServerBuilder.Signal[]) - Method in interface nxopen.mechatronics.UDPSignalServerBuilder
-
Sets UDP connection information
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectionLabelHorizontalOffsetPosition(DiagrammingConnectionlabelhorizontaloffsetposition) - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setConnectionLabelOffset(double) - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setConnectionLabelPositionCenter(boolean) - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setConnectionLabelVerticalOffsetPosition(DiagrammingConnectionlabelverticaloffsetposition) - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setConnectionName(String) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectionNames(Part[], String[]) - Method in interface nxopen.mechatronics.TCPClientBuilder
-
Sets TCP connection names
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectionNames(String[]) - Method in interface nxopen.mechatronics.TCPSignalServerBuilder
-
Sets TCP connection names
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectionNames(Part[], String[]) - Method in interface nxopen.mechatronics.UDPSignalClientBuilder
-
Sets UDP connection names
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectionNames(String[]) - Method in interface nxopen.mechatronics.UDPSignalServerBuilder
-
Sets UDP connection names
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectionPointLocation(NXObject) - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Sets the connection point location
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setConnectionPointsPath(String) - Method in interface nxopen.cae.connections.ComponentData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setConnections(ConnectionData[]) - Method in interface nxopen.cae.connections.ComposerData
-
Sets connections
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setConnectionString(String) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setConnectionType(ParameterRuleBuilder.Connection) - Method in interface nxopen.ame.ParameterRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setConnectionType(ComposerConnectionType) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setConnectionType(EndCutBuilder.ConnectionTypes) - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setConnectMember(BoundaryMemberSet.ConnectMemberType) - Method in interface nxopen.cam.BoundaryMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setConnectorCompatibleTypeList(String[]) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
The connector compatible types are set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConnectorCompatibleTypeName(String) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConnectorDirection(Direction) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConnectorExpressionPropagationList(Expression[]) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
The connectors propagated expressions are set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConnectorName(String) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConnectorParallelToObjectDirection(Direction) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConnectorPoint(Point) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConnectorSize(int) - Method in interface nxopen.linedesigner.ResizeConnectorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConnectorType(ConnectorDevice.ComponentType) - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Sets the connector type.
- setConnectorTypeName(String) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setConnectPart(boolean) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setConnectURL(String) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setConnectVector(Direction) - Method in interface nxopen.tooling.CoolingConnectBuilder
-
License requirements: None.
- setConsiderPorts(boolean) - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
Set to false to include a placement solution maintaining the origin and orientation of the component being replaced.
- setConsiderPorts(boolean) - Method in interface nxopen.routing.PlacePartBuilder
-
Set a flag which will inform the placement solutions builder to consider ports when computing placement solutions during a replace part operation.
- setConstantFittingSectionCount(int) - Method in interface nxopen.features.VarsweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setConstantLowerLimit(double) - Method in interface nxopen.cam.FeedsOptimizationData
-
License requirements: cam_base ("CAM BASE")
.
- setConstantThickness(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.
- setConstantUpperLimit(double) - Method in interface nxopen.cam.FeedsOptimizationData
-
License requirements: cam_base ("CAM BASE")
.
- setConstName(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setConstrained(boolean) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setConstrainedEndPoint1(Point) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setConstrainedEndPoint2(Point) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setConstrainedPlaneCSYS(CoordinateSystem) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setConstrainedPoint(Point) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setConstrainedStartPoint1(Point) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setConstrainedStartPoint2(Point) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setConstraint(AttributeTemplatesBuilder.ConstraintOptions) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setConstraint(MatchSurfaceBuilder.MatchConstaint) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setConstraint(PointSetAlignmentBuilder.ConstraintOptions) - Method in interface nxopen.geometricutilities.PointSetAlignmentBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setConstraint(boolean) - Method in interface nxopen.tooling.MoldFillingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setConstraintAlignment(Constraint.Alignment) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setConstraintChecking(boolean) - Method in interface nxopen.cae.optimization.DAOStopCondition
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setConstraintCollectionType(ComponentConstraintGroup.ConstraintsCollectionType) - Method in interface nxopen.positioning.ComponentConstraintGroup
-
Sets the type of constraint collection that is performed using the defining components.
- setConstraintCollectionType(ComponentConstraintGroup.ConstraintsCollectionType) - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setConstraintColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setConstraintEquationData(FEElement, DofTerm[], double) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets constraint element associated data.
- setConstraintGroupName(String) - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setConstraintInformation(boolean, int[], int[], int[], int[], int[], int[], TaggedObject[], TaggedObject[], Point[], Point[], double[], double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Set constraint information.
- setConstraintName(String) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setConstraintOptions(FlatteningAndFormingBuilderEx.Constraints) - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setConstraintPlane(CoordinateSystem) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setConstraintPlane(CoordinateSystem) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setConstraintPoint(Point) - Method in interface nxopen.routing.StockOffsetPointBuilder
-
Sets the point that defines the location of the selected point.
- setConstraintReferenceHalfSpace(ConstraintReference.HalfSpace) - Method in interface nxopen.positioning.ConstraintReference
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setConstraints(SimConstraint[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set selected constraints to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setConstraints(DatumConstraint[]) - Method in interface nxopen.features.DatumBuilder
-
Sets the contraint objects that define the positioning of this datum.
- setConstraintSymbolSize(double) - Method in interface nxopen.preferences.SessionSketch
-
Sets the constraint symbol size.
- setConstraintSymbolSize(double) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the constraint symbol size
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setConstraintType(OnestepUnformBuilder.Constraint) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setConstraintType(TBSConstraintBuilder.ConstraintOption) - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setConstraintType(DatumConstraint.Type) - Method in interface nxopen.DatumConstraint
-
Sets
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setConstraintType(SMBoundaryConditionBuilder.ConstraintTypes) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setConstraintType(Nester3D.Constraint) - Method in interface nxopen.mfg.am.Nester3D
-
License requirements: am_pb_mtls_nest_3d_2 ("Advanced NX Powder Bed Additive 3D Nesting") OR am_pb_mtls_nest_3d_1 ("Basic NX Powder Bed Additive 3D Nesting")
.
- setConstraintType(Constraint.Type) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setConstraintType(SketchConstraintBuilder.Constraint) - Method in interface nxopen.SketchConstraintBuilder
-
License requirements: None.
- setConstructGeometryColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setConstructGeometryFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setConstructGeometryLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setConstructGeometryWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setConstruction(ThroughCurveMeshBuilder.ConstructionMethod) - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setConstruction(ThroughCurvesBuilder.ConstructionMethod) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setConstructionFeatures(ConstructionFeatureData[]) - Method in interface nxopen.features.CustomFeaturePreUpdateEvent
-
The custom feature construction features
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setConstructionMethod(FilletBuilder.EnumConstructionMethod) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setConstructionMethod(JointmarkBuilder.Method) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setConstructionMethodOption(RollingLineBuilder.ConstructionMethodTypes) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setContact(boolean) - Method in interface nxopen.cam.PathLinearMotion
-
License requirements: cam_base ("CAM BASE")
.
- setContactAreaFunction(MotionFunction) - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactAreaType(TirePropertyAdvancedParameters.ContactType) - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactBnd(boolean) - Method in interface nxopen.cam.FlowBuilder
-
License requirements: None.
- setContactData(PathContactMotion) - Method in interface nxopen.cam.PathLinearMotion
-
License requirements: cam_base ("CAM BASE")
.
- setContactEdgeEndPoint(Point) - Method in interface nxopen.cae.ContactMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setContactEdgeStartPoint(Point) - Method in interface nxopen.cae.ContactMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setContactKinematics(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactLengthWidth(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactMethod(TirePropertyTnoBuilder.ContactMethodType) - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactName(String) - Method in interface nxopen.motion.CurveContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactOffset(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setContactPoint(Point) - Method in interface nxopen.mechatronics.RackPinionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setContactPoint(Point) - Method in interface nxopen.motion.CouplerBuilder
-
Sets the contact point
License requirements: None.
- setContactPointGlobal(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactPointRoadRef(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactPointsTolerance(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setContactPositionRingHeight(DmCmBuilder.ContactPositionRingHeightType) - Method in interface nxopen.cam.DmCmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setContactType(CfdContactPreventionConstraintBuilder.Contact) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setContactType(CamPathContactType) - Method in interface nxopen.cam.Path
-
License requirements: cam_base ("CAM BASE")
.
- setContactType(AnalyticalContactBuilder.ContactTypeOption) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactType(BodyContactBuilder.ContactTypeOption) - Method in interface nxopen.motion.BodyContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactTypeOption(BodyContactRecurdyn.ContactType) - Method in interface nxopen.motion.BodyContactRecurdyn
-
License requirements: mechanisms ("MECHANISMS")
.
- setContactTypeOption(LsdynaGeometryPreparationBuilder.ContactType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setContainer(CaeCloneManager.CloneOption, String) - Method in interface nxopen.pdm.CaeCloneManager
-
- setContainerCenterOfGravity(NXObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Set a container center of gravity value
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setContainerFile(String) - Method in interface nxopen.tooling.ReusableObject
-
License requirements: None.
- setContainerMass(NXObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Set a container mass value
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setContainerName(NXObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Set the name of a container
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setContainerName(String) - Method in interface nxopen.features.shipdesign.ShipContainerBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setContainerPart(String) - Method in interface nxopen.features.shipdesign.ShipContainerBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setContainerWeldLength(NXObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Set a container weld length value
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setContainment(CaeBoundingVolumePrimitiveContainment) - Method in interface nxopen.cae.BoundingVolumePrimitive
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setContainment(Tag) - Method in interface nxopen.uf.UFModeling
-
- setContainmentType(EditSubopCommand.ContainmentTypes) - Method in interface nxopen.cam.EditSubopCommand
-
License requirements: None.
- setContent(SizedSymbol[]) - Method in interface nxopen.diagramming.tables.CellBuilder
-
Sets cell content.
- setContent(String) - Method in interface nxopen.markup.Text
-
License requirements: None.
- setContent(String) - Method in interface nxopen.openxml.TextDocumentData
-
Sets the content to be exported of text data
License requirements: None.
- setContentAlignment(ContentAlignment) - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
License requirements: None.
- setContentDefinition(ContentDefinition) - Method in interface nxopen.assemblies.Subset
-
- setContentDefinition(ContentDefinition) - Method in interface nxopen.assemblies.SubsetBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setContentDefinition(ContentDefinition) - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setContentOrder(HoleTableSettingsContentBuilder.Content[]) - Method in interface nxopen.annotations.HoleTableSettingsContentBuilder
-
Sets content order
License requirements: drafting ("DRAFTING")
.
- setContents(NamingRuleBuilder[]) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Sets the contents of the entire list.
- setContents(TypeMappingBuilder[]) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Sets the contents of the entire list.
- setContents(ArbitraryAreaSeedBuilder[]) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Sets the contents of the entire list.
- setContents(DatumReferenceBuilder[]) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Sets the contents of the entire list.
- setContents(FeatureControlFrameDataBuilder[]) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Sets the contents of the entire list.
- setContents(FeatureControlFrameIndicatorBuilder[]) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Sets the contents of the entire list.
- setContents(LeaderData[]) - Method in interface nxopen.annotations.LeaderDataList
-
Sets the contents of the entire list.
- setContents(MasterSymbolListItemBuilder[]) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Sets the contents of the entire list.
- setContents(SymbolCatalogParameterBuilder[]) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Sets the contents of the entire list.
- setContents(TitleBlockCellBuilder[]) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Sets the contents of the entire list.
- setContents(Partition[]) - Method in interface nxopen.assemblies.PartitionList
-
Sets the contents of the entire list.
- setContents(Body[]) - Method in interface nxopen.BodyList
-
Sets the contents of the entire list.
- setContents(DependentMeshListItemBuilder[]) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Sets the contents of the entire list.
- setContents(ManualSweepBetweenListItemSelection[]) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Sets the contents of the entire list.
- setContents(MeshManualSweepBetweenListItemSelection[]) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Sets the contents of the entire list.
- setContents(BoundaryMemberSet[]) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Sets the contents of the entire list.
- setContents(BoundarySet[]) - Method in interface nxopen.cam.BoundarySetList
-
Sets the contents of the entire list.
- setContents(BoundaryTurnVariableStockSet[]) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Sets the contents of the entire list.
- setContents(CAMFeature[]) - Method in interface nxopen.cam.CAMFeatureList
-
Sets the contents of the entire list.
- setContents(CollisionPairBuilder[]) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Sets the contents of the entire list.
- setContents(CustomLoopSet[]) - Method in interface nxopen.cam.CustomLoopSetList
-
Sets the contents of the entire list.
- setContents(CutVolume[]) - Method in interface nxopen.cam.CutVolumeList
-
Sets the contents of the entire list.
- setContents(DriveChainItemBuilder[]) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Sets the contents of the entire list.
- setContents(GeometrySet[]) - Method in interface nxopen.cam.GeometrySetList
-
Sets the contents of the entire list.
- setContents(HoldingSystemBuilder[]) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Sets the contents of the entire list.
- setContents(HoleBossSet[]) - Method in interface nxopen.cam.HoleBossSetList
-
Sets the contents of the entire list.
- setContents(InPathEventDataBuilder[]) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Sets the contents of the entire list.
- setContents(LaserControlPoint[]) - Method in interface nxopen.cam.LaserControlPointList
-
Sets the contents of the entire list.
- setContents(ManualFeatureBuilder[]) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Sets the contents of the entire list.
- setContents(Splitter[]) - Method in interface nxopen.cam.SplitterList
-
Sets the contents of the entire list.
- setContents(SurfaceDriveGeometrySet[]) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Sets the contents of the entire list.
- setContents(TabPointDataBuilder[]) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Sets the contents of the entire list.
- setContents(ThreadedBossSet[]) - Method in interface nxopen.cam.ThreadedBossSetList
-
Sets the contents of the entire list.
- setContents(ThreadedHoleSet[]) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Sets the contents of the entire list.
- setContents(ToolPathSplitItemBuilder[]) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Sets the contents of the entire list.
- setContents(Ude[]) - Method in interface nxopen.cam.UdeList
-
Sets the contents of the entire list.
- setContents(WedmCustomBoundaryDataBuilder[]) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Sets the contents of the entire list.
- setContents(WireGuide[]) - Method in interface nxopen.cam.WireGuideList
-
Sets the contents of the entire list.
- setContents(DateItemBuilder[]) - Method in interface nxopen.DateItemBuilderList
-
Sets the contents of the entire list.
- setContents(ConnectionLocationBuilder[]) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Sets the contents of the entire list.
- setContents(LeaderLineBuilder[]) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Sets the contents of the entire list.
- setContents(PortBuilder[]) - Method in interface nxopen.diagramming.PortBuilderList
-
Sets the contents of the entire list.
- setContents(LineTypeBuilder[]) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Sets the contents of the entire list.
- setContents(DieAssistantFlangeProfile[]) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Sets the contents of the entire list.
- setContents(DieAssistantTrimProfile[]) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Sets the contents of the entire list.
- setContents(DieBooleanBuilder[]) - Method in interface nxopen.die.DieBooleanBuilderList
-
Sets the contents of the entire list.
- setContents(DieLimitsBuilder[]) - Method in interface nxopen.die.DieLimitsBuilderList
-
Sets the contents of the entire list.
- setContents(DieLocationBuilder[]) - Method in interface nxopen.die.DieLocationBuilderList
-
Sets the contents of the entire list.
- setContents(DrawBeadSegmentBuilder[]) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Sets the contents of the entire list.
- setContents(PierceItemBuilder[]) - Method in interface nxopen.die.PierceItemBuilderList
-
Sets the contents of the entire list.
- setContents(PointCloudClippingBoxesListItemBuilder[]) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Sets the contents of the entire list.
- setContents(AttributeItemBuilder[]) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Sets the contents of the entire list.
- setContents(PrimaryContentItemBuilder[]) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Sets the contents of the entire list.
- setContents(SectionLineSegmentBuilder[]) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Sets the contents of the entire list.
- setContents(SectionLineSegmentPointBuilder[]) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
- setContents(ShipDraftingViewLinesBuilder[]) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Sets the contents of the entire list.
- setContents(String, String[]) - Method in interface nxopen.drawings.ViewStyleFPCalloutConfigBuilder
-
Sets the contents for a Flat Pattern callout type
License requirements: drafting ("DRAFTING")
.
- setContents(ViewStyleShipbuildingLinesBuilder[]) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Sets the contents of the entire list.
- setContents(ExpressionCollectorSet[]) - Method in interface nxopen.ExpressionCollectorSetList
-
Sets the contents of the entire list.
- setContents(ExpressionSectionSet[]) - Method in interface nxopen.ExpressionSectionSetList
-
Sets the contents of the entire list.
- setContents(Feature[]) - Method in interface nxopen.features.FeatureList
-
Sets the contents of the entire list.
- setContents(GeometricConstraintData[]) - Method in interface nxopen.features.GeometricConstraintDataManager
-
- setContents(GeometricConstraintDataManager[]) - Method in interface nxopen.features.GeometricConstraintDataSetManager
-
Sets array of manager objects in the list.
- setContents(GlobalShapingCurveOffsetBuilder[]) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Sets the contents of the entire list.
- setContents(GlobalShapingPointOffsetBuilder[]) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Sets the contents of the entire list.
- setContents(PartGeometryCopySelectBuilder[]) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Sets the contents of the entire list.
- setContents(PointSetFacePercentageBuilder[]) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Sets the contents of the entire list.
- setContents(RegionListItemBuilder[]) - Method in interface nxopen.features.RegionListItemBuilderList
-
Sets the contents of the entire list.
- setContents(BendListItemBuilder[]) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Sets the contents of the entire list.
- setContents(ConvertInputListItemBuilder[]) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Sets the contents of the entire list.
- setContents(FeatureBendPropertiesBuilder[]) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Sets the contents of the entire list.
- setContents(JoggleInputListItemBuilder[]) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Sets the contents of the entire list.
- setContents(SMBoundaryConditionBuilder[]) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Sets the contents of the entire list.
- setContents(AnchorPoint[]) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Sets the contents of the entire list.
- setContents(BulkHeadListItemBuilder[]) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Sets the contents of the entire list.
- setContents(CornerCutListItemBuilder[]) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Sets the contents of the entire list.
- setContents(DeckListItemBuilder[]) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Sets the contents of the entire list.
- setContents(DrawingPartBuilder[]) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Sets the contents of the entire list.
- setContents(DrawingSheetBuilder[]) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Sets the contents of the entire list.
- setContents(ItFrameListItemBuilder[]) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Sets the contents of the entire list.
- setContents(OrientationRegionItemBuilder[]) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Sets the contents of the entire list.
- setContents(PlaneListBuilder[]) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Sets the contents of the entire list.
- setContents(PlateBoundaryOptionBuilder[]) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Sets the contents of the entire list.
- setContents(SeamBlockBuilder[]) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Sets the contents of the entire list.
- setContents(SectionViewBuilder[]) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Sets the contents of the entire list.
- setContents(ShipNamesBuilder[]) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Sets the contents of the entire list.
- setContents(StandardPartItemBuilder[]) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Sets the contents of the entire list.
- setContents(SteelInsulationBoundaryBuilder[]) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Sets the contents of the entire list.
- setContents(SubSystemBuilder[]) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Sets the contents of the entire list.
- setContents(TransFrameListItemBuilder[]) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Sets the contents of the entire list.
- setContents(SmoothRangeBuilder[]) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Sets the contents of the entire list.
- setContents(CageSectionData[]) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Sets the contents of the entire list.
- setContents(VariableRadiusPointsBuilder[]) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Sets the contents of the entire list.
- setContents(CloseRangeCameraListItemBuilder[]) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Sets the contents of the entire list.
- setContents(CloseRangeDemoCylinderListItemBuilder[]) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Sets the contents of the entire list.
- setContents(PathObjects[]) - Method in interface nxopen.fields.PathObjectsList
-
Sets the contents of the entire list.
- setContents(BlendSetbackBuilder[]) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Sets the contents of the entire list.
- setContents(BoundaryDefinitionBuilder[]) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Sets the contents of the entire list.
- setContents(BoundingObjectBuilder[]) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Sets the contents of the entire list.
- setContents(EntityUsageInfo[]) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Sets the contents of the entire list.
- setContents(FaceSetOffset[]) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Sets the contents of the entire list.
- setContents(FtmFixedCurvesBuilder[]) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Sets the contents of the entire list.
- setContents(FtmTransformCurvesBuilder[]) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Sets the contents of the entire list.
- setContents(FtmTransformPointsBuilder[]) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Sets the contents of the entire list.
- setContents(InstanceEditedExpressionItem[]) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Sets the contents of the entire list.
- setContents(ParentEquivalencyMap[]) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Sets the contents of the entire list.
- setContents(PatternIncrementItem[]) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Sets the contents of the entire list.
- setContents(PatternSpacingsListItem[]) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Sets the contents of the entire list.
- setContents(ReduceSurfaceRadiusFaceGroupBuilder[]) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Sets the contents of the entire list.
- setContents(RotationSetBuilder[]) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Sets the contents of the entire list.
- setContents(ScalingSetBuilder[]) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Sets the contents of the entire list.
- setContents(SelectionList[]) - Method in interface nxopen.geometricutilities.SelectionListList
-
Sets the contents of the entire list.
- setContents(SpinePlaneBuilder[]) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Sets the contents of the entire list.
- setContents(StyledSweepDoubleOnPathDimBuilder[]) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Sets the contents of the entire list.
- setContents(TransitionCurveBuilder[]) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Sets the contents of the entire list.
- setContents(TransitionLawNodeBuilder[]) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Sets the contents of the entire list.
- setContents(TrimCurveBoundingObjectBuilder[]) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Sets the contents of the entire list.
- setContents(TwoExpressionsCollectorSet[]) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Sets the contents of the entire list.
- setContents(TwoExpressionsSectionSet[]) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Sets the contents of the entire list.
- setContents(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setContents(ListCreator[]) - Method in interface nxopen.ListCreatorList
-
Sets the contents of the entire list.
- setContents(PathTransitionBuilder[]) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Sets the contents of the entire list.
- setContents(ExternalConnectionElementBuilder[]) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Sets the contents of the entire list.
- setContents(GanttOperationConditionBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Sets the contents of the entire list.
- setContents(GanttOperationParameterBuilder[]) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Sets the contents of the entire list.
- setContents(MATLABSignalConnectionBuilder[]) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Sets the contents of the entire list.
- setContents(PathConstraintFrameBuilder[]) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Sets the contents of the entire list.
- setContents(ProxyObjectParameterBuilder[]) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Sets the contents of the entire list.
- setContents(RuntimeFormulaParameterBuilder[]) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Sets the contents of the entire list.
- setContents(SensorsActuatorsListBuilder[]) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Sets the contents of the entire list.
- setContents(SHMSignalConnectionBuilder[]) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Sets the contents of the entire list.
- setContents(SignalConnectionBuilder[]) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Sets the contents of the entire list.
- setContents(SignalMappingConnectionBuilder[]) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Sets the contents of the entire list.
- setContents(ModelingView[]) - Method in interface nxopen.ModelingViewList
-
Sets the contents of the entire list.
- setContents(ConfigurationParameter[]) - Method in interface nxopen.motion.ConfigurationParameterList
-
Sets the contents of the entire list.
- setContents(ControlInputPortBuilder[]) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Sets the contents of the entire list.
- setContents(InputPortAssociation[]) - Method in interface nxopen.motion.InputPortAssociationList
-
Sets the contents of the entire list.
- setContents(OutputPortAssociation[]) - Method in interface nxopen.motion.OutputPortAssociationList
-
Sets the contents of the entire list.
- setContents(PortVariable[]) - Method in interface nxopen.motion.PortVariableList
-
Sets the contents of the entire list.
- setContents(SegmentBuilder[]) - Method in interface nxopen.motion.SegmentBuilderList
-
Sets the contents of the entire list.
- setContents(SignalChartListItem[]) - Method in interface nxopen.motion.SignalChartListItemList
-
Sets the contents of the entire list.
- setContents(NXObject[]) - Method in interface nxopen.NXObjectList
-
Sets the contents of the entire list.
- setContents(TaggedObject[]) - Method in interface nxopen.ObjectList
-
Sets the contents of the entire list.
- setContents(Plane[]) - Method in interface nxopen.PlaneList
-
Sets the contents of the entire list.
- setContents(Point[]) - Method in interface nxopen.PointList
-
Sets the contents of the entire list.
- setContents(HydraulicLifterBuilder[]) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Sets the contents of the entire list.
- setContents(LinearCamBuilder[]) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Sets the contents of the entire list.
- setContents(MachineAdjustmentBuilder[]) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Sets the contents of the entire list.
- setContents(MountPointBuilder[]) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Sets the contents of the entire list.
- setContents(RotaryCamBuilder[]) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Sets the contents of the entire list.
- setContents(UserMotionBuilder[]) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Sets the contents of the entire list.
- setContents(RegionPoint[]) - Method in interface nxopen.RegionPointList
-
Sets the contents of the entire list.
- setContents(RunItemsBuilder[]) - Method in interface nxopen.routing.RunItemsBuilderList
-
Sets the contents of the entire list.
- setContents(ScCollector[]) - Method in interface nxopen.ScCollectorList
-
Sets the contents of the entire list.
- setContents(Section[]) - Method in interface nxopen.SectionList
-
Sets the contents of the entire list.
- setContents(KinematicChain[]) - Method in interface nxopen.sim.KinematicChainList
-
Sets the contents of the entire list.
- setContents(KinematicChannelBuilder[]) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Sets the contents of the entire list.
- setContents(KinematicJunctionBuilder[]) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Sets the contents of the entire list.
- setContents(TaggedObject[]) - Method in interface nxopen.TaggedObjectList
-
Sets the contents of the entire list.
- setContents(SelectReuseLibraryListItemBuilder[]) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Sets the contents of the entire list.
- setContents(ShimInnerProfileSetBuilder[]) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Sets the contents of the entire list.
- setContents(JointItemBuilder[]) - Method in interface nxopen.weld.JointItemBuilderList
-
Sets the contents of the entire list.
- setContents(JointmarkFaceSetsBuilder[]) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Sets the contents of the entire list.
- setContents(JointmarkGuideBuilder[]) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Sets the contents of the entire list.
- setContents(JointmarkPointsBuilder[]) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Sets the contents of the entire list.
- setContents(WeldBeadPathBuilder[]) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Sets the contents of the entire list.
- setContents(WeldBeadSizeBuilder[]) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Sets the contents of the entire list.
- setContents(WeldFillStripBuilder[]) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Sets the contents of the entire list.
- setContext(String) - Method in interface nxopen.ame.ExtractAttributeBaseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setContext(SnapshotSubsetBuilder.ContextType) - Method in interface nxopen.issue.SnapshotSubsetBuilder
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setContext(BasePart) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setContext(BasePart) - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setContext(BasePart) - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setContext(String) - Method in interface nxopen.pdm.AlternateIdManager
-
Sets the value of a context.
- setContext(MatingConverter.PartContext) - Method in interface nxopen.positioning.MatingConverter
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setContextAssembly(String) - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
Context assembly part file path
License requirements: drafting ("DRAFTING")
.
- setContextAttribute(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setContextAttribute(String) - Method in interface nxopen.features.shipdesign.ShipNamesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setContextComponent(Component) - Method in interface nxopen.features.AssemblyCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setContextConnectionPortAndBendPoints(AMEExtendedObject, Point2d[]) - Method in interface nxopen.ame.TeeJunctionBuilder
-
Set Context Connection's Start Port and it's Bend Points.
- setContextDebug(int) - Method in interface nxopen.uf.UFHelp
-
- setContextEntity(TaggedObject) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
Set the context entity on which the context attribute is stored.
- setContextOperation(PartBuilder.Operation) - Method in interface nxopen.pdm.PartBuilder
-
Sets explicitly the place from where part selection dialog invoked into builder.
- setContextValues(Part, Part, View, NXObject) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Set the CONTEXT values
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setContinuationNote(String) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setContinuationProperty(TableSectionStyleBuilder.ContinuationPropertyType) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setContinuationSpacing(double) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setContinueProcessing(boolean) - Method in interface nxopen.drafting.DrawingAutomationWizard
-
Sets the flag denoting whether or not to create the booklet in the current session
License requirements: None.
- setContinueUpdateOnError(RoutingPath.ContinueUpdOnError) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setContinueZoneIndexingAcrossSheets(boolean) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setContinueZoneIndexingAcrossSheets(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setContinuity(BlendCornerBuilder.ContinuityTypes) - Method in interface nxopen.features.BlendCornerBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setContinuity(SubdivisionBridgeFaceBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setContinuity(SubdivisionExtrudeCageBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setContinuity(SubdivisionFillBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionFillBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setContinuity(SubdivisionLoftBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setContinuity(SubdivisionRevolveBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setContinuity(SubdivisionSweepBuilder.ContinuityType) - Method in interface nxopen.features.subdivision.SubdivisionSweepBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setContinuityType(SubdivisionConnectCageBuilder.ContinuityTypes) - Method in interface nxopen.features.subdivision.SubdivisionConnectCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setContinuityType(SubdivisionSetContinuityBuilder.ContinuityTypes) - Method in interface nxopen.features.subdivision.SubdivisionSetContinuityBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setContinuityType(CurveContinuityBuilder.Type) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setContinuityType(Continuity.ContinuityTypes) - Method in interface nxopen.geometricutilities.Continuity
-
License requirements: None.
- setContinuityTypeOption(MeshTransformerBuilder.ContinuityType) - Method in interface nxopen.features.MeshTransformerBuilder
-
License requirements: None.
- setContinuousAutoDimensioning(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not to continuously create auto dimensions in a sketch.
- setContinuousAutoDimensioningSetting(boolean) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the setting that controls whether or not to continuously create auto dimensions in a sketch.
- setContinuousCut(boolean) - Method in interface nxopen.cam.CylindricalMillingCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setContourFlag(boolean) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Set the flag that turns on/off the visibility of Contour Curve
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setContourHeight(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setContouringLevel(int) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
License requirements: None.
- setContouringRange(ContouringRange) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
License requirements: None.
- setContourRefinement(int) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setContourShape(WeldContourShape) - Method in interface nxopen.weld.GrooveBuilder
-
- setContourShift(double) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setContourSymbol(LineWeldDataBuilder.ContourSymbolType) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setContourType(FilletBuilder.EnumContour) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setContourType(PlugSlotBuilder.EnumContour) - Method in interface nxopen.weld.PlugSlotBuilder
-
License requirements: None.
- setContourType(WeldGrooveBuilder.Contour) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setContributorNumber(int) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setControl(NXObject) - Method in interface nxopen.routing.RouteLogicalAssociation
-
Sets the control for LogicalAssocition
License requirements: routing_harness ("Routing Harness")
.
- setControlDataFile(String) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: None.
- setControlDirection(ToolAxisInterpolate.ControlDirectionTypes) - Method in interface nxopen.cam.ToolAxisInterpolate
-
License requirements: cam_base ("CAM BASE")
.
- setControlledNoteTitle(int) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setControllerLanguage(String) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the controller language
License requirements: None.
- setControllerLine(MachineToolConfiguration.ControllerLines) - Method in interface nxopen.sim.MachineToolConfiguration
-
License requirements: None.
- setControllerName(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.
- setControllerType(String) - Method in interface nxopen.sim.MachineToolConfiguration
-
License requirements: None.
- setControllerVersion(String) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the controller version
License requirements: None.
- setControlMethod(DatumCommonBuilder.ControlMethodTypes) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setControlPoint(ControlPoint) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Set the control point for the start of the labeling sequence
License requirements: routing_hvac ("Routing HVAC")
.
- setControlPoint(Point) - Method in interface nxopen.SketchConicBuilder
-
License requirements: None.
- setControlPoint(Point) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setControlPoint(Point) - Method in interface nxopen.tooling.InsertEditToolsBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setControlPointDefiningObject(ControlPoint, Point3d, NXObject) - Method in interface nxopen.routing.LinearPathBuilder
-
Fully defines a preview control point.
- setControlPointDefiningPoint(ControlPoint, Point) - Method in interface nxopen.routing.LinearPathBuilder
-
Fully defines a preview control point using the given point.
- setControlPointEnd(ControlPoint) - Method in interface nxopen.routing.IPath
-
License requirements: routing_base ("Routing Basic")
.
- setControlPointFromSegment(ISegment) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Set the control point for the start of the labeling sequence
License requirements: routing_hvac ("Routing HVAC")
.
- setControlPointOffset(HoleDrillingBuilder.ControlPointOffsetType) - Method in interface nxopen.cam.HoleDrillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setControlPointStart(ControlPoint) - Method in interface nxopen.routing.IPath
-
License requirements: routing_base ("Routing Basic")
.
- setControlPointType(HoleMakingBuilder.ControlPointTypes) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setControlRegion(SectionSurfaceBuilder.ControlRegionEnum) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setControlRegion(SectionSurfaceBuilderEx.ControlRegionType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setControlSheet(Body) - Method in interface nxopen.features.GlobalShapingBuilder
-
Control sheet
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setControlSurface(Body) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setControlTextIndex(int) - Method in interface nxopen.annotations.CustomSymbolTextData
-
- setControlType(LeadAngles.ControlTypes) - Method in interface nxopen.cam.LeadAngles
-
License requirements: cam_base ("CAM BASE")
.
- setControlVoltage(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setConvergenceSpeedType(OptimizationBuilder.OptimizationConvergenceSpeedType) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setConversionType(PartOperationImportBuilder.ConversionRule) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setConvertAnalyticToConvergentAngularTolerance(double) - Method in interface nxopen.preferences.PartModeling
-
License requirements: None.
- setConvertAnalyticToConvergentAngularTolerance(double) - Method in interface nxopen.preferences.SessionModeling
-
- setConvertAnalyticToConvergentDistanceTolerance(double) - Method in interface nxopen.preferences.PartModeling
-
License requirements: None.
- setConvertAnalyticToConvergentDistanceTolerance(double) - Method in interface nxopen.preferences.SessionModeling
-
- setConvertAnnotation(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setConvertEccentricSegment(boolean) - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Sets the conversion flag.
- setConvertPrimaryTolerance(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setConvertPrimaryToleranceToDualDimensionUnit(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the flag indicating whether to convert the primary tolerance to dual dimension unit
License requirements: None.
- setConvertToLinkedBody(boolean) - Method in interface nxopen.features.PromotionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setConvertToOriginalModelView(boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setConvertToReference(boolean) - Method in interface nxopen.SketchMakeSymmetricBuilder
-
License requirements: None.
- setConvertToReference(boolean) - Method in interface nxopen.SketchMirrorPatternBuilder
-
License requirements: None.
- setConvertToReference(boolean) - Method in interface nxopen.SketchOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setConvertToSew(boolean) - Method in interface nxopen.features.BooleanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setConvertType(PolygonModelingBuilder.ConvertTypes) - Method in interface nxopen.facet.PolygonModelingBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setConvertType(AssignPatchBuilder.ConvertTypeOption) - Method in interface nxopen.tooling.AssignPatchBuilder
-
License requirements: None.
- setConvertWorkPartAndLoadedChildrenOption(StockPartConverterBuilder.PartOption) - Method in interface nxopen.routing.StockPartConverterBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setConvexConcaveY(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setConvexCorner(WedmGeomBuilder.ConvexCornerTypes) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setConvexCorner(WedmOperationBuilder.ConvexCornerTypes) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setConvexity(EmbossRegion.ConvexityOption) - Method in interface nxopen.features.EmbossRegion
-
Sets the convexity option
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setConvexityDirection(Direction) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setConvexityEnabled(boolean) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setConvexRadius(double) - Method in interface nxopen.facet.CurvatureBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setConvLayoutData(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setConvLayouts(DxfdwgImporter.ConvLayoutsAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setConvModelData(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setCoolant(String) - Method in interface nxopen.cam.CycleCoolant
-
License requirements: cam_base ("CAM BASE")
.
- setCoolant(UFVariant, int, double) - Method in interface nxopen.uf.UFSim
-
- setCoolantThrough(boolean) - Method in interface nxopen.cam.MillingToolBuilder
-
License requirements: None.
- setCoordinate(int) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the coordinate of AFU Header Id
License requirements: None.
- setCoordinate(double, double) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the coordinates for user annotation
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCoordinateAxes(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setCoordinateOption(PointsFromFileBuilder.Options) - Method in interface nxopen.geometricutilities.PointsFromFileBuilder
-
Sets the option indicating type of point coordinates
License requirements: None.
- setCoordinatePlane(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setCoordinatePlane(KinematicChain.CoordinatePlaneTypes) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setCoordinates(Point3d) - Method in interface nxopen.cae.connections.CoordinatesLocation
-
Set the coordinates.
- setCoordinates(Point3d[]) - Method in interface nxopen.cae.connections.CoordinatesSeriesLocation
-
Set the coordinates.
- setCoordinates(Point3d) - Method in interface nxopen.cae.MeshPoint
-
Sets the coordinates of the point
License requirements: None.
- setCoordinates(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCoordinates(Point3d) - Method in interface nxopen.Point
-
Sets the coordinates of the point
License requirements: None.
- setCoordinates(Point3d) - Method in interface nxopen.SubdivisionMeshVertex
-
Sets the position of the vertex.
- setCoordinatesAndTolerance(Point3d, double) - Method in interface nxopen.cae.CoordinateSelectionRecipe
-
Set the target coordinates.
- setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ClippingParameters
-
Set coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCoordinateSystem(LaminateGraphicalReportBuilder.CoordinateSystemType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultMeasureResultAllOptions
-
Set the coordinate system for directional components
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultMeasureResultDirectionOptions
-
Set the coordinate system for directional components
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultMeasureResultDirectionSectionOptions
-
Set the coordinate system for directional components
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCoordinateSystem(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultParameters
-
Set result coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCoordinateSystem(Point3d, Vector3d, Vector3d) - Method in interface nxopen.cam.fbm.Feature
-
Change the feature coordinate system
License requirements: cam_base ("CAM BASE")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cam.MachiningFeature
-
License requirements: cam_base ("CAM BASE")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.HelixBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.LawCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setCoordinateSystem(CoordinateSystem) - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCoordinateSystem(CartesianCoordinateSystem) - Method in interface nxopen.WCS
-
Changes the coordinate system of the WCS to a new
coordinate system.
- setCoordinateSystemCartesianAtCsys(CartesianCoordinateSystem) - Method in interface nxopen.WCS
-
Creates a WCS at a new coordinate system.
- setCoordinateSystemMatrix(Matrix3x3) - Method in interface nxopen.die.DieDirectionBuilder
-
License requirements: None.
- setCoordinateSystemMatrix(Matrix3x3) - Method in interface nxopen.die.DieLocationBuilder
-
License requirements: None.
- setCoordinateSystemMatrix(Matrix3x3) - Method in interface nxopen.die.DiePlaneBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCoordinateSystemOffset(int) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCoordinateSystemOrigin(Point3d) - Method in interface nxopen.die.DieDirectionBuilder
-
License requirements: None.
- setCoordinateSystemOrigin(Point3d) - Method in interface nxopen.die.DieLocationBuilder
-
License requirements: None.
- setCoordinateSystemOrigin(Point3d) - Method in interface nxopen.die.DiePlaneBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCoordinateSystemPropertyValue(String, CoordinateSystem) - Method in interface nxopen.BasePropertyTable
-
- setCoordinateSystemType(GraphBuilder.CsysChoices) - Method in interface nxopen.motion.GraphBuilder
-
- setCoordinateX(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCoordinateX(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCoordinateY(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCoordinateY(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCoordinateZ(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCoordinateZ(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCoordSystem(CoordinateSystem) - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCoordSystem(CoordinateSystem) - Method in interface nxopen.fields.SpatialMapBuilder
-
License requirements: None.
- setCoordSystem(CoordinateSystem) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setCopeStocks(Stock[]) - Method in interface nxopen.routing.CopeCorner
-
Set the ordered list of stocks to cope.
- setCopiedAttributes(CharacteristicList) - Method in interface nxopen.routing.TransformPathBuilder
-
Set attributes to be copied.
- setCopies(int) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setCopies(int) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setCopiesPerParent(int) - Method in interface nxopen.ame.InsertSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCopiousData(IgesImporter.CopiousDataEnum) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setCoplanarAxesEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setCoplanarEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setCoplanarThreshold(double) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setCopy(boolean) - Method in interface nxopen.features.EnlargeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setCopy(boolean) - Method in interface nxopen.features.MoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyAllSheetsToggle(boolean) - Method in interface nxopen.tooling.MWCopySheetsBuilder
-
License requirements: None.
- setCopyAndMirror(boolean) - Method in interface nxopen.die.FillBuilder
-
Sets the copy and mirror setting of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCopyApproachOption(CopyPasteNewBuilder.CopyApproach) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setCopyAttributeOnObjectCopy(boolean) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setCopyChamferLabels(boolean) - Method in interface nxopen.features.PatternFaceFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyChoices(MakeUniquePartBuilder.Option) - Method in interface nxopen.assemblies.MakeUniquePartBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setCopyConnectedParts(boolean) - Method in interface nxopen.routing.TransformPathBuilder
-
Sets the method indicates whether connected parts get copied or not.
- setCopyConstraintPattern(boolean) - Method in interface nxopen.assemblies.ComponentPatternBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setCopyCornerFlag(boolean) - Method in interface nxopen.routing.OffsetPath
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setCopyDocumentStructure(boolean) - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCopyEventTrigger(ObjectSourceBuilder.CopyEventTriggerOption) - Method in interface nxopen.mechatronics.ObjectSourceBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCopyInstance(boolean) - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
License requirements: None.
- setCopyNonMasterPartsOption(LogicalObject, PartOperationCopyBuilder.CopyNonMasterParts) - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
- setCopyOption(ElementRotateBuilder.CopyType) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCopyOption(ElementTranslateBuilder.CopyType) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCopyOption(NodeProjectBuilder.NodeProjectTypes) - Method in interface nxopen.cae.NodeProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCopyOption(NodeReflectBuilder.CopyType) - Method in interface nxopen.cae.NodeReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCopyOption(NodeRotateBuilder.CopyType) - Method in interface nxopen.cae.NodeRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCopyOption(NodeTranslateBuilder.CopyType) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCopyOriginal(boolean) - Method in interface nxopen.features.ExtendSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyOriginalOption(boolean) - Method in interface nxopen.features.TrimAndExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyReplacementFeature(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyResolveGeometry(boolean) - Method in interface nxopen.features.CopyPasteBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopySection(boolean) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCopySection(boolean) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setCopyTargets(boolean) - Method in interface nxopen.features.BooleanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyThreads(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCopyThreads(boolean) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyThreads(boolean) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCopyThreads(boolean) - Method in interface nxopen.features.PatternGeometryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyThreads(boolean) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
License requirements: None.
- setCopyThreads(boolean) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyTools(boolean) - Method in interface nxopen.features.BooleanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCopyTransform(Vector3d, Matrix3x3) - Method in interface nxopen.routing.TransformPathBuilder
-
Sets the transform to use for the copy operation.
- setCoreDiameter(AmeOpticalConnectionFiberType, double) - Method in interface nxopen.ame.OpticalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCoreDirection(int) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCoreDrawDieOption(boolean) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCoreDrawPunchOption(boolean) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCoreOrientation(ISurface) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Sets the core orientation of the handling core.
- setCorePunch(boolean) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the core punch switch of the draw die punch casting, if true the punch will be cored, if false the punch will not be cored.
- setCorner1(Point) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCorner2(Point) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCornerControlMethod(CornerControlBuilder.CornerControlMethods) - Method in interface nxopen.cam.CornerControlBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCornerCutType(ShellTemplateBuilder.CornerCutTypes) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setCornerData(NXObject, NXObject[]) - Method in interface nxopen.cae.MappedMeshBuilder
-
Sets the corner data.
- setCornerDataWithEdges(NXObject, int[], NXObject[]) - Method in interface nxopen.cae.MappedMeshBuilder
-
Sets the corner data using array of edges and int array consists of if user
want start of an edge or an end of an edge.
- setCornerFeedType(BoundaryTurnMemberCorner.FeedType) - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
License requirements: cam_base ("CAM BASE")
.
- setCornerFindingOptions(CutParametersCornerFindingTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCorneringTableFile(String) - Method in interface nxopen.motion.TirePropertyBasicParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setCornerLoops(boolean) - Method in interface nxopen.cam.PlanarOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCornerMethod(DivideCurveBuilder.CornerOption) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setCornerNumber(int) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setCornerPoint(Point) - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setCornerPoint(Point) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setCornerPoint(Point) - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setCornerPoints(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.DatumPlane
-
Sets the corner points of the datum plane
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCornerPoints(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.display.BoundedGridBuilder
-
Sets corner points of the grid
License requirements: None.
- setCornerPoints(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.display.ImageBaseBuilder
-
Set the image corner points.
- setCornerPoints(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.features.DatumPlaneBuilder
-
Sets corner points to builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCornerPoints(Point3d[]) - Method in interface nxopen.features.ResizePlaneBuilder
-
Sets the four corner points for resizing a datum plane
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCornerRadius(double) - Method in interface nxopen.cam.LaserCutoutDefinition
-
License requirements: cam_base ("CAM BASE")
.
- setCornerRadius(double) - Method in interface nxopen.cam.WireGuide
-
License requirements: cam_base ("CAM BASE")
.
- setCornerRadius(String) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
- setCornerReliefType(BendOptions.CornerReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the corner relief type.
- setCornerReliefType(EditCornerBuilder.CornerReliefTypeOptions) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setCornerTreatmentOriginType(MiterOptions.CornerTreatmentOriginTypeOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setCornerType(TurnGrooveCornerControl.CornerTypes) - Method in interface nxopen.cam.TurnGrooveCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setCornerType(CornerBuilder.Type) - Method in interface nxopen.mechanicalrouting.CornerBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setCornerType(CornerDesignBuilder.CornerTypeOpt) - Method in interface nxopen.tooling.CornerDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCornerZoneModification(double) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setCornerZoneModification(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCorrectionMode(FemSignalProcessingSignalAttributes.CorrectionModes) - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes
-
License requirements: None.
- setCorrectionMode(SimLoadRecipeFunctionAttributes.CorrectionModes) - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes
-
License requirements: None.
- setCorrelationType(CSDExcitation.CorrelationType) - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setCorrelationValue(double) - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setCorrelMethod(ModelUpdateCorrelMethodBuilder.Method) - Method in interface nxopen.cae.ModelUpdateCorrelMethodBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setCosimSimModel(String) - Method in interface nxopen.motion.RecurdynSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setCoSimulation(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCostOfStep(Tag, double) - Method in interface nxopen.uf.UFAssem
-
- setCoulombFrictionOption(BodyContactAdams.CoulombFriction) - Method in interface nxopen.motion.BodyContactAdams
-
License requirements: mechanisms ("MECHANISMS")
.
- setCoulombFrictionOption(BodyContactLms.CoulombFriction) - Method in interface nxopen.motion.BodyContactLms
-
License requirements: mechanisms ("MECHANISMS")
.
- setCoulombFrictionOption(BodyContactRecurdyn.CoulombFriction) - Method in interface nxopen.motion.BodyContactRecurdyn
-
License requirements: mechanisms ("MECHANISMS")
.
- setCoulombFrictionOption(BodyContactSphereToCAD.CoulombFriction) - Method in interface nxopen.motion.BodyContactSphereToCAD
-
License requirements: mechanisms ("MECHANISMS")
.
- setCount(int) - Method in interface nxopen.assemblies.AddComponentBuilder
-
Sets the number of components to be added.
- setCount(int) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setCounterboreDepth(String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets the depth of the counterbore for a hole.
- setCounterboreDepthType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setCounterboreDepthValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setCounterboredHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCounterBoreDiameter(double) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the counter bore diameter of the die hole.
- setCounterBoreDiameter(double) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the counter bore diameter of die holes.
- setCounterboreDiameter(String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets the diameter of the counterbore for a hole.
- setCounterboreDiameter(NXObject, double) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Sets counterbore diameter for hole series.
- setCounterboreDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setCounterboreDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setCounterboreHole(Point3d, boolean, ISurface, String, String, String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets parameters for counterbore hole
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setCountersinkAngle(double) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCountersinkAngle(String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets the angle of the countersink for a hole.
- setCountersinkAngleType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setCountersinkAngleValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setCountersinkDiameter(String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets the diameter of the countersink for a hole.
- setCountersinkDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setCountersinkDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setCountersinkHole(Point3d, boolean, ISurface, String, String, String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets parameters for countersink hole
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setCounterSpindleFace(Face) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setCountersunkDiameter(NXObject, double) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Sets countersunk diameter for hole series.
- setCountersunkHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCountOfFaces(int) - Method in interface nxopen.cam.Splitter
-
License requirements: cam_base ("CAM BASE")
.
- setCoupledSolutionOption(SolidPropertyCheckBuilder.CoupledSolutionOutput) - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCoupleLimit(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setCoutoutType(PenetrationRequest.CoutoutType) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setCoutoutType(PenetrationRequest.CoutoutType) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setCoutoutType(PenetrationRequest.CoutoutType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setCOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setCoveredStocks(Stock[]) - Method in interface nxopen.routing.OverstockApplication
-
- setCoveredStocks(Stock[]) - Method in interface nxopen.routing.OverstockBuilder
-
Sets the stocks to be covered by the overstock.
- setCoverThickness(double) - Method in interface nxopen.routing.electrical.CableStockDefinition
-
Sets the thickness of the cable's covering.
- setCreateAngleDimension(boolean) - Method in interface nxopen.SketchChamferBuilder
-
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCreateApexCurve(boolean) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setCreateApexCurve(boolean) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setCreateAsPartingSurface(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setCreateBasins(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateBlankOption(BlankGeneratorBuilder.CreateBlankType) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setCreateBorders(boolean) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setCreateBorders(boolean) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setCreateBorders(boolean) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setCreateBorders(boolean) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateBottomBubblesToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the status to create bottom bubbles of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setCreateBreaks(boolean) - Method in interface nxopen.annotations.BreakSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateCamDisk(boolean) - Method in interface nxopen.mechatronics.CamBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCreateConcept(boolean) - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCreateContinuitySymbolOnSectionStiffener(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCreateCopy(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setCreateCopy(boolean) - Method in interface nxopen.features.RefitFaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setCreateCopy(boolean) - Method in interface nxopen.layout2d.ReparentComponentBuilder
-
License requirements: None.
- setCreateCopyPart(boolean) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCreateCSYS(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setCreateCurveOption(boolean) - Method in interface nxopen.SketchEvaluator
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCreateCurves(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setCreateCurvesForGouges(boolean) - Method in interface nxopen.cam.CutDepthChecker
-
License requirements: cam_base ("CAM BASE")
.
- setCreateDamper(boolean) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: None.
- setCreatedApplication(WeldJointBuilder.Application) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setCreateDataSetToggle(boolean) - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCreatedByInsert(boolean) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setCreatedHoleManufacturingNote(NXObject) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCreateDiagnosticGroups(boolean) - Method in interface nxopen.cae.DurabilityEventSolverBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setCreateDiagnosticGroups(boolean) - Method in interface nxopen.cae.DurabilitySolverBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setCreateDimension(boolean) - Method in interface nxopen.SketchOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCreateDirectionVector(boolean) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCreateDistance1Dimension(boolean) - Method in interface nxopen.SketchChamferBuilder
-
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCreateDistance2Dimension(boolean) - Method in interface nxopen.SketchChamferBuilder
-
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCreatedOrdinateOrigin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCreatedOrdinateOrigin(TaggedObject) - Method in interface nxopen.tooling.HoleReportBuilder
-
License requirements: None.
- setCreateDraftingComponent(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateEditMethod(ReliefDesignBuilder.Method) - Method in interface nxopen.tooling.ReliefDesignBuilder
-
License requirements: None.
- setCreateEndToStart(boolean) - Method in interface nxopen.weld.WeldBeadPathBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCreateEntryPoint(boolean) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCreateExitPoint(boolean) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCreateExtrudeSweptPreview(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setCreateFacets(boolean) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setCreateFeatureGroups(boolean) - Method in interface nxopen.weld.WeldImportBuilder
-
License requirements: None.
- setCreateFieldOption(boolean) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCreateFittings(boolean) - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setCreateFloor(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCreateFolded(boolean) - Method in interface nxopen.drawings.SectionViewBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateFragmentToggle(boolean) - Method in interface nxopen.ame.CreateTemplateBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCreateGaps(boolean) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateGapsStatus(boolean) - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Sets the status of create gaps
License requirements: drafting ("DRAFTING")
.
- setCreateGapsStatus(boolean) - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Sets the status of create gaps
License requirements: drafting ("DRAFTING")
.
- setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateGeometry(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateGroups(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCreateHeadImpactZones(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateHolePatch(boolean) - Method in interface nxopen.features.PatchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCreateImpactGrid(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateIndependent(int) - Method in interface nxopen.preferences.DetailViewPreferences
-
License requirements: drafting ("DRAFTING")
.
- setCreateIndependentDetailView(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateInferConstraintsSetting(Sketch.CreateInferConstraintSetting) - Method in interface nxopen.Sketch
-
Sets the toggle that controls the creation of infer constraints in sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCreateInferredConstraints(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not to create inferred constraints
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCreateInferredConstraints(boolean) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the setting that controls whether or not inferred constraints are automatically created when curves and points are created in the sketch.
- setCreateInMasterModelPart(boolean) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateIntermediateDatumCsys(boolean) - Method in interface nxopen.SketchInPlaceBuilder
-
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SpecifyPlane
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setCreateInterpartLink(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setCreateIntersectionGeometry(boolean) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateIterativeAlignment(boolean) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCreateLastStaggered(boolean) - Method in interface nxopen.geometricutilities.CircularPattern
-
License requirements: None.
- setCreateLastStaggered(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setCreateLeftBubblesToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the status to create left bubbles of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setCreateLegImpact(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateLocation(boolean) - Method in interface nxopen.tooling.ReliefDesignBuilder
-
License requirements: None.
- setCreateMethod(WeldJointBuilder.Types) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setCreateNamedGroup(boolean) - Method in interface nxopen.PartImporter
-
Sets the Create Named Group flag.
- setCreateNcapCircles(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateNcapSheets(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateNewCopy(boolean) - Method in interface nxopen.features.PoleSmoothingBuilder
-
Sets the indicator for creating a new copy
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCreateNewCopy(boolean) - Method in interface nxopen.features.SnipSurfaceBuilder
-
Sets the indicator for creating a new copy
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCreateNewPointsOnSubdivide(RoutingPath.AddPointsToSpline) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setCreateNewRowAsLocked(boolean) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setCreateOffsetData(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateOpeningFillLines(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCreateOption(boolean) - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCreateOverlayDataWithSnapshotData(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreatePartingLinesToggle(boolean) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
License requirements: None.
- setCreatePathsEnum(InspectionLinkPmiBuilder.CreatePathsOptions) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCreatePlane(boolean) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCreatePocket(boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the flag to indicate whether to create pocket when adding the fastener
License requirements: None.
- setCreatePoint(boolean) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCreateQueryResultsView(boolean) - Method in interface nxopen.annotations.QueryPmiBuilder
-
Sets the create query results view.
- setCreateReferenceLines(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateReferencePattern(boolean) - Method in interface nxopen.features.PatternFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCreateRegionsOption(SurfaceRegions.CreateRegionsTypes) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setCreateRegionsToggle(boolean) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
License requirements: None.
- setCreateRightBubblesToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the status to create right bubbles of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setCreateRoomWithWall(boolean) - Method in interface nxopen.features.shipdesign.RoomBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setCreateScantling(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCreateScantlingTable(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCreateScrap(boolean) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the create scrap setting of the pierce task.
- setCreateScrap(boolean) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the create scrap setting of the trim task.
- setCreateScrap(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setCreateSeamsAtKnuckles(boolean) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCreateSeamsAtKnuckles(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setCreateSectionLine(SectionLineStyleBuilder.CreateSectionLineType) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setCreateSeparateParts(boolean) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setCreateSheet(boolean) - Method in interface nxopen.tooling.CalculateAreaBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setCreateShm(boolean) - Method in interface nxopen.mechatronics.SHMSignalProviderBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCreateSingle2DComponentDefinition(boolean) - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateSingleFeatures(boolean) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCreateSketch(boolean) - Method in interface nxopen.features.OptimizeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCreateSketches(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
- setCreateSkipWelds(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCreateSlopeConstraints(RoutingPath.CreateSlopeConstraints) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setCreateSmartRcps(RoutingPath.CreateSmartRcps) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setCreateSolidSetting(boolean) - Method in interface nxopen.tooling.PocketBuilder
-
License requirements: None.
- setCreateSolution(boolean) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
Specifies whether to create an imported solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCreateSpaceReservationEnabled(boolean) - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setCreateSpacingExp(boolean) - Method in interface nxopen.SketchPatternBuilder
-
License requirements: None.
- setCreateSplineTangency(RoutingPath.CreateTangency) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setCreateStiffenerSectionSymbol(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCreateStructureID(boolean) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setCreateSupportCasting(boolean) - Method in interface nxopen.die.CastReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCreateTangencyFlag(boolean) - Method in interface nxopen.routing.SplinePathBuilder
-
Sets whether or not additional the newly created spline will be made tangent to
connecting splines.
- setCreateTerminalsOption(RoutingElectrical.CreateTerminalsType) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the create terminals option.
- setCreateTireEnvelopeFeature(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateTopBubblesToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the status to create top bubbles in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setCreateTraceLines(boolean) - Method in interface nxopen.features.MoveObjectBuilder
-
License requirements: None.
- setCreateTrimmingMarks(boolean) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setCreateTrimmingMarks(boolean) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setCreateTrimmingMarks(boolean) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setCreateTrimmingMarks(boolean) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateTwoGroups(boolean) - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
License requirements: None.
- setCreateUntrimmedMargins(boolean) - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
License requirements: None.
- setCreateUntrimmedMargins(boolean) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateViewIndependent(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the flag indicating whether the PMI would be created view independent
License requirements: None.
- setCreateWithPad(boolean) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the create with pad switch of the die hole, if true a pad will be created around the hole, if false the pad will not be created.
- setCreateWithPad(boolean) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created.
- setCreateWithPad(boolean) - Method in interface nxopen.die.KeywayBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setCreateWrapAroundDistanceLines(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCreateXDimensions(boolean) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCreateYDimensions(boolean) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCreateZoneLabels(boolean) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setCreateZoneLabels(boolean) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setCreateZoneLabels(boolean) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setCreateZoneLabels(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateZoneMarking(boolean) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setCreateZoneMarking(boolean) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setCreateZoneMarkings(boolean) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setCreateZoneMarkings(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreateZones(boolean) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setCreateZones(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCreationDirection(DatumCommonBuilder.CreationDirectionMethods) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCreationDirection(WeldCreationDirection) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the creation direction type.
- setCreationMethod(SpunOutlineGeom.CreationTypes) - Method in interface nxopen.cam.SpunOutlineGeom
-
License requirements: cam_base ("CAM BASE")
.
- setCreationMode(PortBuilder.CreationModeType) - Method in interface nxopen.ame.PortBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCreationType(QueryBuilder.Types) - Method in interface nxopen.ame.QueryBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCreationType(Mesh3dHexBuilder.Type) - Method in interface nxopen.cae.Mesh3dHexBuilder
-
Sets the type of hex mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCreColor(int, int, int, int) - Method in interface nxopen.uf.UFObj
-
- setCreColorToDef(int, int, int) - Method in interface nxopen.uf.UFObj
-
- setCreLineFont(int, int, int, int) - Method in interface nxopen.uf.UFObj
-
- setCreLineFontToDef(int, int, int) - Method in interface nxopen.uf.UFObj
-
- setCrestLine(NXObject) - Method in interface nxopen.cam.ThreadTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCrestLineDirection(boolean) - Method in interface nxopen.cam.ThreadTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCreWidth(int, int, int, int) - Method in interface nxopen.uf.UFObj
-
- setCreWidthToDef(int, int, int) - Method in interface nxopen.uf.UFObj
-
- setCriteria(String[], String[]) - Method in interface nxopen.assemblies.AttributeSearchTermBuilder
-
Set the entry titles and values that are used to populate the saved query.
- setCriteria(String, String[], String[]) - Method in interface nxopen.pdm.FindCriteria
-
This API sets the search query name, entries, and values.
- setCriteriaValue(TestValueTypes.CriteriaType, double, Unit) - Method in interface nxopen.cae.modelcheck.ITestValue
-
Sets the criteria value.
- setCriteriaValue(TestValueTypes.CriteriaType, String, Unit) - Method in interface nxopen.cae.modelcheck.ITestValue
-
Sets the criteria value.
- setCriticalPlaneOption(DurabilityStrainGageAnalyzerBuilder.CriticalPlaneOptionEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setCrossCurveCount(int) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCrossCurveNormalToFlowCount(int) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCrossCurveNormalToFlowCurve(TaggedObject[]) - Method in interface nxopen.cam.DPMItpBuilder
-
Sets the flow curve used in generation of cross curves normal to flow.
- setCrossCurves(Curve[]) - Method in interface nxopen.routing.CrossSection
-
Sets the curves that define the profile for the
CrossSection
object.
- setCrossCurvesMethod(DPMItpBuilder.CrossCurvesMethodOption) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCrossDegree(int) - Method in interface nxopen.SurfaceRebuildData
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setCrossHatch(boolean) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets the status of cross hatch.
- setCrosshatch(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCrossHatch(boolean) - Method in interface nxopen.preferences.SectionViewPreferences
-
Sets the status of cross hatch.
- setCrosshatchAdjacencyTolarance(double) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets the value of crosshatch adjacency tolarance.
- setCrosshatchAdjacencyTolarance(double) - Method in interface nxopen.preferences.SectionViewPreferences
-
Sets the value of crosshatch adjacency tolarance.
- setCrosshatchAdjacencyTolerance(double) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setCrosshatchAreaFillsCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setCrosshatchColor(NXColor) - Method in interface nxopen.annotations.RegionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setCrosshatchFile(String) - Method in interface nxopen.annotations.HatchBuilder
-
- setCrosshatchFile(String) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCrosshatching(boolean) - Method in interface nxopen.CGMImporter
-
Sets the crosshatching flag, true if crosshatching should be done
License requirements: None.
- setCrosshatchInheritedSectionViews(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCrossHatchMappingFile(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setCrossHatchMappingFile(String) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setCrosshatchPattern(RegionBuilder.CrosshatchPatterns) - Method in interface nxopen.annotations.RegionBuilder
-
- setCrosshatchPmiLightweightSectionView(boolean) - Method in interface nxopen.preferences.InheritPmiPreferences
-
License requirements: drafting ("DRAFTING")
.
- setCrosshatchPmiLwsv(boolean) - Method in interface nxopen.drawings.InheritPmiViewStyle
-
Controls whether the cut faces of an inherited PMI Lightweight
section view are cross-hatched or not.
- setCrosshatchPmiLwsv(boolean) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCrossHoleCircle(NXObject) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCrossingLevel(double) - Method in interface nxopen.cae.responsesimulation.LcrResultsEvaluationSettingBuilder
-
- setCrossLinesRatio(double) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setCrossMaxDegree(int) - Method in interface nxopen.SurfaceRebuildData
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setCrossMaxSegments(int) - Method in interface nxopen.SurfaceRebuildData
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setCrossover(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setCrossRebuildType(SurfaceRebuildData.Type) - Method in interface nxopen.SurfaceRebuildData
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setCrossSection(CrossSection) - Method in interface nxopen.routing.Stock
-
- setCrossSectionCurveOption(GapFlushnessBuilder.SectionCurveOptions) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCrossSectionDirection(Direction) - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Sets the orientation vector. cross section direction of the stock.
- setCrossSections(CrossSection[]) - Method in interface nxopen.routing.StockData
-
- setCrossSectionType(FaceBlendBuilder.CrossSectionOption) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCrossSectionType(BeadBuilder.CrossSectionTypeOptions) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Sets the bead profile type .
- setCrossSectionType(ElectricalStockDefinition.SectionType) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Sets the cross section type of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setCrossSelection(boolean) - Method in interface nxopen.blockstyler.Node
-
License requirements: None.
- setCsinkDiameter(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setCsMode(TurnAvoidancePathPointsBuilder.CsTypes) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCsOption(AssignNodalCSBuilder.Cs) - Method in interface nxopen.cae.AssignNodalCSBuilder
-
License requirements: None.
- setCsvFileName(String) - Method in interface nxopen.weld.ExportWeldBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.cae.connections.ICsys
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsys(NXObject) - Method in interface nxopen.cae.DependentMeshBuilder
-
The cys
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.cae.Mesh0dBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsys(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsys(Matrix3x3) - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
Set csys for extracting data for x axis
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCsys(SmartObject) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setCsys(Result.CoordinateSystem) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCsys(CartesianCoordinateSystem) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setCsys(CartesianCoordinateSystem) - Method in interface nxopen.cam.LaserControlPoint
-
License requirements: cam_base ("CAM BASE")
.
- setCsys(CartesianCoordinateSystem) - Method in interface nxopen.cam.LaserHeadOrientation
-
License requirements: cam_base ("CAM BASE")
.
- setCsys(CartesianCoordinateSystem) - Method in interface nxopen.die.PressureSystemChildBuilder
-
Sets the csys of the pressure system.
- setCsys(CartesianCoordinateSystem) - Method in interface nxopen.features.DatumCsysBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.features.ScaleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCSys(SectionInertiaAnalysisBuilder.CoordSys) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setCsys(CoordinateSystem) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.motion.LinkAttachmentData
-
License requirements: None.
- setCsys(CoordinateSystem) - Method in interface nxopen.motion.MarkerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCsys(CoordinateSystem) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCsys(VobjectCsysType) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setCsys(boolean) - Method in interface nxopen.ObjectTypeSelector
-
License requirements: None.
- setCsys(CoordinateSystem) - Method in interface nxopen.PasteSpecialBuilder
-
License requirements: None.
- setCsys(CartesianCoordinateSystem) - Method in interface nxopen.sim.KinematicJunctionBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- setCsys(CoordinateSystem[]) - Method in interface nxopen.tooling.QuickDatumCsysBuilder
-
Sets the csys.
- setCsysAssemblyState(boolean) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the assy coordinate system state
License requirements: ugweld ("UG WELD")
.
- setCsysAssociative(boolean) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setCsysAxis(PostGraphAlongPathBuilder.CoordinateSysAxis) - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCsysDataType(BushingEADBuilder.CoordinateSystemDataType) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsysDataType(ShellEADBuilder.CoordinateSystemDataType) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsysDiameterHeight(CoordinateSystem, Expression, Expression) - Method in interface nxopen.cae.CylinderBoundingVolume
-
Sets the coordinate system, diameter and height for the Cylinder Bounding Volume.
- setCsysEdgelengths(CoordinateSystem, Expression, Expression, Expression) - Method in interface nxopen.cae.BoxBoundingVolume
-
Sets the coordinate system and edge lengths for the Box Bounding Volume.
- setCsysFixedSizeOnScreen(boolean) - Method in interface nxopen.preferences.PartVisualizationScreen
-
License requirements: None.
- setCsysFixedSizeOnScreen(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
- setCsysInformationListing(Preferences.CsysInformationListingTypes) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setCsysMirrorOption(GeomcopyBuilder.CsysMirrorOptions) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCsysMirrorOption(MirrorBuilder.CsysMirrorOptions) - Method in interface nxopen.features.MirrorBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCsysOption(int) - Method in interface nxopen.cae.Mesh0dBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCsysOrientWcsToMcs(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setCsysPick(CoordinateSystem) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysPurposeMode(OrientGeomBuilder.CsysPurposeModes) - Method in interface nxopen.cam.OrientGeomBuilder
-
Sets the CSYS purpose
License requirements: cam_base ("CAM BASE")
.
- setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysReferenceType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysRefType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysRefType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysRefType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysRefType(CamInspectionOperationCsysreferencetypes) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCsysShowThrough(boolean) - Method in interface nxopen.preferences.PartVisualizationScreen
-
License requirements: None.
- setCsysShowThrough(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
- setCsystem(CartesianCoordinateSystem) - Method in interface nxopen.SketchInPlaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
- setCsysType(CsysType) - Method in interface nxopen.cae.connections.ICsys
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCSysType(NodalForceReportBuilder.CSType) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setCsysType(PostGraphAlongPathBuilder.CsysType) - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
Sets csys type for extracting abscissa
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCsysType(DynamicSectionTypes.CoordinateSystem) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setCsysTypeEnum(DisplayNodalCsysBuilder.DisplayNodalCsysType) - Method in interface nxopen.cae.DisplayNodalCsysBuilder
-
License requirements: None.
- setCsysVisibility(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: None.
- setCsysWorkPartState(boolean) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the work coordinate systemstate
License requirements: ugweld ("UG WELD")
.
- setCubicTypeMode(SectionSurfaceBuilderEx.CubicType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setCue(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.CompositeBlock
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.SelectElement
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.SelectNode
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setCue(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setCurBodies(DirectUnfoldBuilder.BodyList) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setCurrent(VisualReport) - Method in interface nxopen.visualreporting.VisualReportManager
-
License requirements: None.
- setCurrentActionType(Manager.ActionType) - Method in interface nxopen.cae.qualityaudit.Manager
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCurrentAppView(UFVariant) - Method in interface nxopen.uf.UFRoute
-
- setCurrentClassId(String) - Method in interface nxopen.ame.PortAttributeHolder
-
Set CurrentClassId
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCurrentComfortStudyName(String) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setCurrentDiscipline(String) - Method in interface nxopen.preferences.RoutingApplicationView
-
Sets the current discipline.
- setCurrentFeature(Feature) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Records the current feature before constructing the dialog.
- setCurrentFeature(Tag) - Method in interface nxopen.uf.UFModeling
-
- setCurrentGroupIDColorIndex(WeldGroupIdColor) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCurrentInterfaceUsageType(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setCurrentInterfaceUsageTypeString(String) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setCurrentItemIndex(int) - Method in interface nxopen.annotations.ListBusinessModifier
-
Sets the current item index
License requirements: geometric_tol ("GDT")
.
- setCurrentIteration(BaseIteration) - Method in interface nxopen.cae.ResultParametersWithNodalForceReport
-
Set current iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCurrentIteration(BaseIteration) - Method in interface nxopen.cae.ResultParametersWithProbe
-
Set current iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCurrentLoadcase(BaseLoadcase) - Method in interface nxopen.cae.ResultParametersWithProbe
-
Set current loadcase
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCurrentlySelectedStationItemName(String) - Method in interface nxopen.ame.ImportHWXmlBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCurrentlySelectedSWBlockItemName(String) - Method in interface nxopen.ame.ImportHWXmlBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCurrentlySelectedTiaProjectName(String) - Method in interface nxopen.ame.ImportHWXmlBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCurrentlySelectedTiaProjectPath(String) - Method in interface nxopen.ame.ImportHWXmlBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCurrentManikinSize(String) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setCurrentMode(IssueManager.Mode) - Method in interface nxopen.issue.IssueManager
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setCurrentMset(TaggedObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setCurrentNode(int) - Method in interface nxopen.blockstyler.Explorer
-
License requirements: None.
- setCurrentObjectType(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setCurrentParameterRuleType(PlcRule.Type) - Method in interface nxopen.ame.CallMethodRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCurrentPartition(Tag) - Method in interface nxopen.uf.UFPs
-
- setCurrentProgramLine(String, int) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Set execution cursor to nc program line in the specified channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setCurrentReferenceSheet(int) - Method in interface nxopen.weld.WeldPointBuilder
-
Set current refsheet
License requirements: ugweld ("UG WELD")
.
- setCurrentRegion(String) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Set the current region
License requirements: None.
- setCurrentResultComp(Result.Component) - Method in interface nxopen.cae.ResultParametersWithNodalForceReport
-
Set result component value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCurrentResultType(ResultParametersWithNodalForceReport.ResultType) - Method in interface nxopen.cae.ResultParametersWithNodalForceReport
-
Set result type value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCurrentSbfFile(String) - Method in interface nxopen.annotations.AnnotationManager
-
Sets the symbol font definition file.
- setCurrentSelectedPort(TaggedObject) - Method in interface nxopen.routing.RunItemsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setCurrentSite(PenetrationSite) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Set current
PenetrationSite
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- setCurrentSpecification(String) - Method in interface nxopen.preferences.RoutingApplicationView
-
Sets the current specification for the current discipline.
- setCurrentStandardPartItem(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Sets the current standard part item that is edited.
- setCurrentStateEnum(InspectionConstructedFeatureBuilder.CurrentStateType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCurrentStep(int) - Method in interface nxopen.blockstyler.Wizard
-
License requirements: None.
- setCurrentStep(int) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
License requirements: None.
- setCurrentString(String) - Method in interface nxopen.ReplaceExpressionsBuilder
-
License requirements: None.
- setCurrentTile(String) - Method in interface nxopen.preferences.RoutingStock
-
Sets the current routing level/tile
License requirements: routing_base ("Routing Basic")
.
- setCurrentUDO(UserDefinedObject) - Method in interface nxopen.tooling.ColorExpressionsBuilder
-
Select current udo
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCurrentZcsJunction(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- setCursorLocation(Point3d) - Method in interface nxopen.blockstyler.SpecifyLocation
-
License requirements: None.
- setCursorLocation(Point3d) - Method in interface nxopen.features.subdivision.SelectCageObjectData
-
Sets the cursor location in absolute coordinates.
- setCursorTracking(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCursorView(int) - Method in interface nxopen.uf.UFUi
-
- setCurvature(Offset) - Method in interface nxopen.features.GeometricConstraintData
-
License requirements: None.
- setCurvatureAbstractionSetting(boolean) - Method in interface nxopen.cae.AutoHealGeometryBuilder
-
License requirements: None.
- setCurvatureCheck(SurfaceContinuityAnalysisBuilder.CurvatureType) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setCurvatureColor(int) - Method in interface nxopen.preferences.SessionModeling
-
Sets the curvature color
License requirements: None.
- setCurvatureDerivative(Offset) - Method in interface nxopen.features.GeometricConstraintData
-
License requirements: None.
- setCurvatureFactor(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCurvatureFactor(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCurvatureSectionPlane(Plane) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setCurvatureSensitivity(int) - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
License requirements: None.
- setCurvatureTolerance(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCurvatureTolerance(double) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setCurvatureTolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setCurvatureTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setCurvatureTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
License requirements: nx_freeform_1 ("basic freeform modeling") OR features_modeling ("FEATURES MODELING")
.
- setCurvatureTolerance(double) - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setCurvatureTolerance(double) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setCurvatureType(FaceCurvatureAnalysisBuilder.CurvatureTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setCurve(IBaseCurve) - Method in interface nxopen.cae.connections.CurveLocation
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCurve(NXObject) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: None.
- setCurve(NXObject) - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
License requirements: None.
- setCurve(Curve) - Method in interface nxopen.features.GeodesicTrimBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCurve(Section) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilder
-
License requirements: None.
- setCurve(MotionFunction) - Method in interface nxopen.motion.LinkCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCurveChainingMethod(RoutingPath.ChainMethod) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setCurveColor(NXColor) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setCurveColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch curve color
License requirements: None.
- setCurveColorOption(DynamicSectionTypes.CurveColorOption) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setCurveControl(StyledCornerBuilder.CurveControlTypes) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setCurveCount(int) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setCurveCurvatureDisplay(PartModeling.CurveCurvatureDisplayType) - Method in interface nxopen.preferences.PartModeling
-
Sets the curve curvature display.
- setCurveCurvatureShowCap(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets the curve curvature display show cap line
License requirements: None.
- setCurveCurvatureStyle(int) - Method in interface nxopen.preferences.PartModeling
-
Sets the curve curvature display style
License requirements: None.
- setCurveDirection(NXObject, int) - Method in interface nxopen.annotations.HatchBuilder
-
Set direction of a curve to the annotation
The number of diection map elements need to specify before to
the direction of the curve elements to the annotation
License requirements: drafting ("DRAFTING")
.
- setCurveDirectionOption(BridgeCurveConnectivity.CurveDirectionOptions) - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setCurveEndOption(TrimCurveBuilder.CurveEndOptions) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCurveExtensionOption(TrimCurve2Builder.CurveExtension) - Method in interface nxopen.features.TrimCurve2Builder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCurveExtensionType(TrimCurveBuilder.CurveExtensionTypes) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCurveFeatures(Feature[]) - Method in interface nxopen.mechatronics.CamBuilder
-
Sets the curve features
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCurveFile(String) - Method in interface nxopen.presslinesimulation.MotionCurvesBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setCurveFitData(UFModl.CurveFitData) - Method in interface nxopen.uf.UFModl
-
- setCurveFitMethod(SessionModeling.CurveFitMethodType) - Method in interface nxopen.preferences.SessionModeling
-
Sets the curve fit method.
- setCurveFitMethod(int) - Method in interface nxopen.uf.UFModlGeneral
-
- setCurveFitOption(BridgeCurveBuilder.CurveFitTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setCurveItem(Section) - Method in interface nxopen.cam.DriveChainItemBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCurveJoinMethod(CurveFitData.Join) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setCurveJoinMethod(CurveFitJoin.JoinMethod) - Method in interface nxopen.geometricutilities.CurveFitJoin
-
Sets the curve join method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCurveMode(InspectionMethodBuilder.ScanCurveModeTypes) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCurveMode(InspectionMethodBuilder.ScanCurveModeTypes) - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCurveName(String) - Method in interface nxopen.cae.QueryCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCurveOffsetType(AOCSBuilder.CurveOffsetTypes) - Method in interface nxopen.features.AOCSBuilder
-
Sets the curve offset type
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCurveOrientation(DatumAxisBuilder.CurveOrientations) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCurveParameterizedType(CurveParameterizedTypes) - Method in interface nxopen.motion.PointOnCurveBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCurvePercentage(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setCurvePointsBy(PointSetBuilder.CurvePointsType) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCurveRules(int) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setCurveRules(int) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setCurveRules(int) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setCurveRules(int) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setCurves(Curve[]) - Method in interface nxopen.cam.ToolAxisTilt
-
Sets the tool axis curve
License requirements: cam_base ("CAM BASE")
.
- setCurves(NXObject[]) - Method in interface nxopen.motion.PointOnCurveBuilder
-
Sets the curves
License requirements: mechanisms ("MECHANISMS")
.
- setCurves(boolean) - Method in interface nxopen.ObjectTypeSelector
-
License requirements: None.
- setCurves(Curve[]) - Method in interface nxopen.routing.BuiltInPath
-
Sets the array of curves referenced by the Built-In-Path object.
- setCurveScan(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCurveSettings(CurveSettings) - Method in interface nxopen.features.ScaleCurveBuilder
-
License requirements: None.
- setCurveToExtend(Curve) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCurveTolerance(double) - Method in interface nxopen.preferences.PartVisualizationLine
-
Sets the curve tolerance.
- setCurveTrimRegionOption(TrimCurveBuilder.CurveTrimRegionOptions) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setCurveType(PathConstraintFrameBuilder.CurveTypes) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCurveType(LinkCouplerBuilder.CurveChoices) - Method in interface nxopen.motion.LinkCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCurveType(SketchProjectBuilder.OutputCurve) - Method in interface nxopen.SketchProjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setCurveTypeEdges(ViewProjectionBuilder.CurveType) - Method in interface nxopen.drawings.ViewProjectionBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setCurveTypePlane1(ViewProjectionBuilder.CurveType) - Method in interface nxopen.drawings.ViewProjectionBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setCurveTypePlane2(ViewProjectionBuilder.CurveType) - Method in interface nxopen.drawings.ViewProjectionBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setCurveUsage(QueryCurveUsageOptions.CurveUsageType) - Method in interface nxopen.cae.QueryCurveUsageOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCushionAngleA27(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setCushionDirection(Direction) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCushionFirmness(HumanPosturePredictionBuilder.CushionFirmnessType) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setCushionName(String) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setCustomAboveLength(double) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCustomAngleTolerance(double) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the custom angle tolerance.
- setCustomAngleTolerance(double) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the custom angle tolerance.
- setCustomAxis(Axis) - Method in interface nxopen.formboard.FlipComponentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setCustomBlankDistance(boolean) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setCustomCylinderAbove(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the distance the custom cylinder should be created above the
weld point
License requirements: ugweld ("UG WELD")
.
- setCustomEdgeTolerance(double) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the custom edge tolerance.
- setCustomEdgeTolerance(double) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the custom edge tolerance.
- setCustomer(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setCustomer(String) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setCustomerArea(Tag, String) - Method in interface nxopen.uf.UFPart
-
- setCustomerSbfFile() - Method in interface nxopen.uf.UFDrf
-
- setCustomerValue(String) - Method in interface nxopen.annotations.CustomerValueBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setCustomFaceTolerance(double) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the custom face tolerance.
- setCustomFaceTolerance(double) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the custom face tolerance.
- setCustomFeed(boolean) - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setCustomFeed(boolean) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setCustomFeed(boolean) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomFeed(boolean) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomFeed(UFVariant, UFDrpos.FeedUse, UFDrpos.FeedUnit, double) - Method in interface nxopen.uf.UFDrpos
-
- setCustomFeedRate(boolean) - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomFeedRate(boolean) - Method in interface nxopen.cam.BoundaryMillingSet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomFeedrate(boolean) - Method in interface nxopen.cam.PathLinearMotion
-
License requirements: cam_base ("CAM BASE")
.
- setCustomFeedType(BoundaryTurnMemberFeed.FeedType) - Method in interface nxopen.cam.BoundaryTurnMemberFeed
-
License requirements: cam_base ("CAM BASE")
.
- setCustomHumanFileName(String) - Method in interface nxopen.features.HumanBuilder
-
Sets custom human figure file name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setCustomizedMaterial(boolean) - Method in interface nxopen.motion.CustomizedMaterialBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setCustomizedViewLabel(boolean) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCustomizedViewLabel(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCustomizedViewLabel(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCustomizedViewLabelText(String[]) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Sets the customized view label text
License requirements: drafting ("DRAFTING")
.
- setCustomizedViewLabelText(String[]) - Method in interface nxopen.drawings.ViewLabelBuilder
-
Sets the customized view label text
License requirements: drafting ("DRAFTING")
.
- setCustomizedViewLabelText(String[]) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Sets the customized view label text
License requirements: drafting ("DRAFTING")
.
- setCustomMemberData(RoughFinishTurningBuilder.CustomMemberDataTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCustomMemberDataDistance(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCustomMessage(String) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setCustomMessage(String) - Method in interface nxopen.visualreporting.Property
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setCustomMessage(String) - Method in interface nxopen.visualreporting.ResultCategory
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setCustomMessage(String) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setCustomMessageOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setCustomMessageOfReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setCustomMessageOfReportingProperty(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setCustomNormalX(double) - Method in interface nxopen.drawings.View2dOrientBuilder
-
Sets the X component of the custom view-normal vector
License requirements: drafting ("DRAFTING")
.
- setCustomNormalY(double) - Method in interface nxopen.drawings.View2dOrientBuilder
-
Sets the Y component of the custom view-normal vector
License requirements: drafting ("DRAFTING")
.
- setCustomNormalZ(double) - Method in interface nxopen.drawings.View2dOrientBuilder
-
Sets the Z component of the custom view-normal vector
License requirements: drafting ("DRAFTING")
.
- setCustomOffset(boolean) - Method in interface nxopen.cam.BoundaryMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomOffset(boolean) - Method in interface nxopen.cam.BoundarySet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomOrientationMethod(View2dOrientBuilder.CustomMethod) - Method in interface nxopen.drawings.View2dOrientBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCustomPaper(int) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setCustomPartOffset(boolean) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomPrimaryX(double) - Method in interface nxopen.drawings.View2dOrientBuilder
-
Sets the X component of the custom view-primary vector
License requirements: drafting ("DRAFTING")
.
- setCustomPrimaryY(double) - Method in interface nxopen.drawings.View2dOrientBuilder
-
Sets the Y component of the custom view-primary vector
License requirements: drafting ("DRAFTING")
.
- setCustomPrimaryZ(double) - Method in interface nxopen.drawings.View2dOrientBuilder
-
Sets the Z component of the custom view-primary vector
License requirements: drafting ("DRAFTING")
.
- setCustomRadius(double) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCustomRadius(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the radius to create the sphere, cylinder, or cone with
License requirements: ugweld ("UG WELD")
.
- setCustomScratchDirectory(String) - Method in interface nxopen.cae.optimization.TBSOutputControlOptions
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setCustomShapeSizeLowerLimit(int) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
License requirements: shape_search ("Shape Search")
.
- setCustomShapeSizeUpperLimit(int) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
License requirements: shape_search ("Shape Search")
.
- setCustomStock(boolean) - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setCustomStock(boolean) - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomStock(boolean) - Method in interface nxopen.cam.BoundaryMillingSet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomStock(boolean) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setCustomStock(boolean) - Method in interface nxopen.cam.BoundaryTurnSet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomStock(boolean) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomStock(boolean) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomSymbolAngle(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setCustomSymbolScale(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setCustomSymbolScale(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setCustomSymbolsInForeground(boolean) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setCustomSymbolsInForeground(boolean) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setCustomSymbolsInForeground(boolean) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setCustomSymbolsInForeground(boolean) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setCustomSymbolSmashToSketch(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the custom symbol smash behavior.
- setCustomTolerance(boolean) - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setCustomTolerance(boolean) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setCustomTolerance(boolean) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomTolerance(boolean) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setCustomTotalCylinderLength(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the total length of the cylinder to be created.
- setCustomTotalLength(double) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCustomType(DatumCommonBuilder.CustomTypes) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCustomTypeName(String) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setCustomXAngle(double) - Method in interface nxopen.drawings.View2dOrientBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCustomYAngle(double) - Method in interface nxopen.drawings.View2dOrientBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCustomZAngle(double) - Method in interface nxopen.drawings.View2dOrientBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCut(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setCut(boolean) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setCut(boolean) - Method in interface nxopen.gateway.CopyCutBuilder
-
License requirements: None.
- setCutAreaColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setCutAreaSelection(Preferences.CutAreaSelectionTypes) - Method in interface nxopen.cam.Preferences
-
- setCutbackLength(double) - Method in interface nxopen.routing.IAxisPort
-
Sets the cutback length of a port, i.e. the length along the wire from
the port where individual wires leave a bundle to attach to pins
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- setCutbackLengthObject(Expression) - Method in interface nxopen.routing.IAxisPort
-
Sets the cutback length object of a port, i.e. an expression representing the length
along the wire from the port where individual wires leave a bundle to attach to pins
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- setCutbackOption(ModelTerminalsBuilder.CutBackLocationOption) - Method in interface nxopen.routing.ModelTerminalsBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setCutBelowOverhangingBlank(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCutBelowToolContact(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCutBetweenLevels(boolean) - Method in interface nxopen.cam.FlowCutSteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setCutBetweenLevels(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCutColor(int) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCutcomMinimumAngle(double) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomMinimumAngle(double) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomOff(NcmWedmBuilder.CutcomOffTypes) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomOn(NcmWedmBuilder.CutcomOnTypes) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomOutputContactPoint(boolean) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomOutputContactPoint(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomOutputPlane(boolean) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomOutputPlane(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomReg(int) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomRegister(int) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setCutcomRegisterFlag(boolean) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomRegisterToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomRegisterType(MachinePocketGroupBuilder.RegisterType) - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
- setCutcomRegisterType(KinematicComponentBuilder.RegisterTypes) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setCutcomTrackingPointType(int) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomType(NcmHoleMachining.CutcomTypes) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setCutcomType(NcmPlanarBuilder.CutcomTypes) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutConnection(CutParametersCutConnectionTypes) - Method in interface nxopen.cam.TurnCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCutCount(int) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setCutDepths(VolumeBased25DMillingOperationBuilder.CutDepthsType) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
License requirements: None.
- setCutDir(GuidingCurvesCutDir.Option) - Method in interface nxopen.cam.GuidingCurvesCutDir
-
License requirements: cam_base ("CAM BASE")
.
- setCutDirection(CutDirection.Types) - Method in interface nxopen.cam.Blade
-
License requirements: cam_base ("CAM BASE")
.
- setCutDirection(CylinderMillingCutParameters.CutDirectionTypes) - Method in interface nxopen.cam.CylinderMillingCutParameters
-
- setCutDirection(DmRotaryFloorFinishBuilder.CutDirection) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Set cut direction.
- setCutDirection(DmSurfBuilder.CutDirection) - Method in interface nxopen.cam.DmSurfBuilder
-
Set the cut direction
License requirements: cam_base ("CAM BASE")
.
- setCutDirection(int) - Method in interface nxopen.cam.DPMTubeBuilder
-
License requirements: None.
- setCutDirection(SurfaceContourBuilder.CutDirectionTypes) - Method in interface nxopen.cam.SurfaceContourBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutDirection(Direction) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setCutDirection(ThreadMillingCutParameters.CutDirectionTypes) - Method in interface nxopen.cam.ThreadMillingCutParameters
-
- setCutDirection(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutDirection(WedmCutParameters.CutDirectionTypes) - Method in interface nxopen.cam.WedmCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCutDirection(Direction) - Method in interface nxopen.drawings.SectionLineBuilder
-
- setCutDirectionType(DmRotaryFloorFinishBuilder.CutDirType) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutDirType(LaserCutDirection.Types) - Method in interface nxopen.cam.LaserCutDirection
-
License requirements: cam_base ("CAM BASE")
.
- setCutFaceColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCutFaceDrops(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setCutFillets(CutParametersFilletsTypes) - Method in interface nxopen.cam.TurnCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCutInfiniteEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.InteractiveBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setCutLength(double) - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Sets the cut length.
- setCutLevelType(AreaMillingSteepContainment.CutLevelTypes) - Method in interface nxopen.cam.AreaMillingSteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setCutLevelType(CutLevel.Types) - Method in interface nxopen.cam.CutLevel
-
License requirements: cam_base ("CAM BASE")
.
- setCutLevelType(CutLevelPlanar.Types) - Method in interface nxopen.cam.CutLevelPlanar
-
License requirements: cam_base ("CAM BASE")
.
- setCutLevelType(FlowCutSteepContainment.CutLevelTypes) - Method in interface nxopen.cam.FlowCutSteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setCutLocation(Point) - Method in interface nxopen.drawings.HalfSectionLineBuilder
-
- setCutLocation3D(Point) - Method in interface nxopen.drawings.OrientedSectionLineBuilder
-
- setCutMethod(String) - Method in interface nxopen.cam.MethodBuilder
-
Set cut method
License requirements: cam_base ("CAM BASE")
.
- setCutoffAngle(String) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setCutoffDistance(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutoffFlag(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutoffFlag(int) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutoffFlag(int) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutoffStock(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutoffText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setCutoffType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setCutOnlyAlongFloorAndWall(boolean) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutOrder(CutParametersCutOrderTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCutOrder(WedmCutOrderBuilder.Type) - Method in interface nxopen.cam.WedmCutOrderBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutOrderType(GuidedCurveCutOrder.CutOrderOption) - Method in interface nxopen.cam.GuidedCurveCutOrder
-
License requirements: cam_base ("CAM BASE")
.
- setCutoutDefType(LaserCutoutDefinition.Types) - Method in interface nxopen.cam.LaserCutoutDefinition
-
License requirements: cam_base ("CAM BASE")
.
- setCutoutDepth(String) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
- setCutoutPart(Part) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setCutoutSection(Section) - Method in interface nxopen.cam.LaserCutoutDefinition
-
License requirements: cam_base ("CAM BASE")
.
- setCutPattern(CutPatternBuilder.Types) - Method in interface nxopen.cam.CutPatternBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutPattern(CylinderMillingBuilder.CutPatternTypes) - Method in interface nxopen.cam.CylinderMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutPatternCenter(DmBndBuilder.BndPatternCenterTypes) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setCutRegions(RoughFinishTurningBuilder.CutRegionsTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutRegionsContainment(CutRegionsBuilder.CutRegionsContainmentTypes) - Method in interface nxopen.cam.CutRegionsBuilder
-
License requirements: None.
- setCutRegionSelectionMode(TurnFeatureGeomBuilder.CutRegionSelectionModes) - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutRegionSelectionPoint(Point) - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutRegionsProgram(CutRegionsBuilder.CutRegionsProgramTypes) - Method in interface nxopen.cam.CutRegionsBuilder
-
License requirements: None.
- setCutRegionsStatus(CutRegionsBuilder.CutRegionsStatusTypes) - Method in interface nxopen.cam.CutRegionsBuilder
-
License requirements: None.
- setCuts(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setCutSequence(TurnGrooveCornerControl.CutSequenceTypes) - Method in interface nxopen.cam.TurnGrooveCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setCutSide(CutSideBuilder.Option) - Method in interface nxopen.cam.CutSideBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutStepFirstCut(int) - Method in interface nxopen.cam.DPMItpBuilder
-
- setCutStepSecondCut(int) - Method in interface nxopen.cam.DPMItpBuilder
-
- setCutStepThirdCut(int) - Method in interface nxopen.cam.DPMItpBuilder
-
- setCutStepType(DPMItpBuilder.StepMethodOption) - Method in interface nxopen.cam.DmStreamlineCutStep
-
License requirements: cam_base ("CAM BASE")
.
- setCutterId(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setCutterSubtype(MillToolBuilder.CutterSubtypes) - Method in interface nxopen.cam.MillToolBuilder
-
License requirements: None.
- setCuttingDirection(FeatureMillingCutParameters.CuttingDirectionTypes) - Method in interface nxopen.cam.FeatureMillingCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCuttingInterfaceConfigFile(String) - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setCuttingInterfaceOutputFile(String) - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setCuttingLength(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setCuttingMode(UFVariant, UFSim.CuttingMode) - Method in interface nxopen.uf.UFSim
-
- setCuttingPerimeter(String) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setCuttingPlaneSymbolArrowDirection(CuttingPlaneSymbolBuilder.ArrowDirectionOption) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setCuttingPlaneSymbolArrowLength(double) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the cutting plane symbol arrow length
License requirements: None.
- setCuttingPlaneSymbolColor(NXColor) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the cutting plane symbol color
License requirements: None.
- setCuttingPlaneSymbolSectionPrefix(String) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the section prefix for cutting plane symbol
License requirements: None.
- setCuttingPlaneSymbolShadedPlane(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the cutting plane symbol shaded plane option
License requirements: None.
- setCuttingPlaneSymbolStartingLetter(String) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the starting letter for cutting plane symbol
License requirements: None.
- setCuttingPlaneSymbolText(String) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
License requirements: geometric_tol ("GDT")
.
- setCuttingPlaneSymbolTextPlaneRelativeToArrow(CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setCutToBoundary(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
License requirements: None.
- setCutType(DPMItpBuilder.CutTypeOption) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setCutType(TurnRoughFinishTestCut.CutTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setCutType(NormalCutoutBuilder.CutTypeOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the cut type for the normal cutout.
- setCutType(int) - Method in interface nxopen.features.SnipSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setCutView(ModelingView) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setCutViewUpdateDelayed(boolean) - Method in interface nxopen.preferences.PartModeling
-
License requirements: None.
- setCutWallsOnly(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setCyclesToFailure(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setCycleTime(double) - Method in interface nxopen.sim.MachineToolConfiguration
-
License requirements: None.
- setCycleTrackingPoint(String) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Sets the cycle tracking point
License requirements: cam_base ("CAM BASE")
.
- setCycleTrackingPoint(String) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setCycleType(String) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setCycleType(ProbeInspectBorebossMoveBuilder.Cycle) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setCyclicStressStrainModel(DurabilityEventFatigueSettingsBuilder.CyclicStressStrainModelEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setCyclicSymmetricParameters(CyclicSymmetricParameters) - Method in interface nxopen.cae.ResultParameters
-
Set Cyclic Symmetric Parameters type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setCyclicSymmetryCsys(CoordinateSystem) - Method in interface nxopen.cae.BaseFemPart
-
Sets the cyclic symmetry csys associated to the fem
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setCyclicSymmetryData(boolean, CoordinateSystem) - Method in interface nxopen.cae.FemCreationOptions
-
Set the cyclic symmetry coordinate system options
License requirements: None.
- setCyclicType(CamProfileBuilder.ProfileCyclicType) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCyclicType(MotionProfileBuilder.ProfileCyclicType) - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setCylDim(Tag, int) - Method in interface nxopen.uf.UFDrf
-
- setCylinder(NXObject) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setCylinder(NXObject) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setCylinderAxialElementSizeOption(MeshControlBuilder.CylinderAxialElementSizeType) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setCylinderAxialNumElements(int) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setCylinderCircleFitMode(InspectionMethodBuilder.CylinderFittingTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCylinderCircularNumElements(int) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setCylinderCircularNumPerQuarter(int) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setCylinderCircularSizeOption(MeshControlBuilder.CylinderCircularSizeType) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setCylinderColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Sets the cylinder color
License requirements: None.
- setCylinderDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setCylinderFitting(InspectionMethodBuilder.CylinderFittingTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setCylinderFreezeGeometryOption(boolean) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setCylinders(HydraulicCylinder[]) - Method in interface nxopen.mechatronics.HydraulicValveBuilder
-
the Cylinders.
- setCylinders(PneumaticCylinder[]) - Method in interface nxopen.mechatronics.PneumaticValveBuilder
-
the Cylinders.
- setCylinderType(StockSizeBuilder.Cylinder) - Method in interface nxopen.tooling.StockSizeBuilder
-
- setCylindricalBushing(Tag, UFMotion.CylindricalBushing) - Method in interface nxopen.uf.UFMotion
-
- setCylindricalExtension(double) - Method in interface nxopen.annotations.AutomaticCenterlineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setCylTolerance(double) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
License requirements: None.
- setD(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setD(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setDamper(Tag, UFMotion.SpringDamper) - Method in interface nxopen.uf.UFMotion
-
- setDamperAppDirection(ConnectorBuilder.ApplicationDirection) - Method in interface nxopen.motion.DamperBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDamperAppDirection(ConnectorBuilder.ApplicationDirection) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDamperCustomizedSolver(boolean) - Method in interface nxopen.motion.DamperBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDamperCustomizedSolver(boolean) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDamperData(FEElement, double, PhysicalPropertyTable, CaeElementAssociatedDataUtilsComponentEnd, CaeElementAssociatedDataUtilsComponentEnd) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets damper element associated data.
- setDamperName(String) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDamping(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Sets the damping value
License requirements: None.
- setDampingCoefficient(double) - Method in interface nxopen.motion.PMDCMotorBuilder
-
Sets the damping coefficient
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setDampingCurve(MotionFunction) - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDampingFactor(double) - Method in interface nxopen.cae.LaminateDampingFactorBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDampingFactors(double, double) - Method in interface nxopen.cae.responsesimulation.ModalProperties
-
Set damping factors for all normal modes
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDampingFactors(double, double) - Method in interface nxopen.motion.FlexBody
-
Sets damping factors for all normal modes
License requirements: mechanisms ("MECHANISMS")
.
- setDampingOption(AnalyticalContactPropertyBuilder.DampingType) - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDampingRatio(double) - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setDampingType(BeamForceBuilder.DampingTypes) - Method in interface nxopen.motion.BeamForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDampingType(SplineBeamPropertyBuilder.DampingTypes) - Method in interface nxopen.motion.SplineBeamPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDarkColor(double[]) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Sets the color of the dark (unlit) areas of reflection contours
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setDashSize(double) - Method in interface nxopen.preferences.PartVisualizationLine
-
Sets the dash size.
- setData(int, int, int, int, double, int, double, int) - Method in interface nxopen.cae.AfuMathFastRMSInfo
-
Set the Fast RMS Parameter Information
License requirements: None.
- setData(String, HumanReachZone.MethodType, double, double, double, double, double, double, String, Human, int, boolean) - Method in interface nxopen.HumanReachZone
-
Set reach zone data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setDatabase(HumanData.DatabaseType) - Method in interface nxopen.features.HumanBuilder
-
Sets database for human
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setDatabase(HumanHandsDialogBuilder.DatabaseType) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setDatabaseObjects(DatabaseObject[]) - Method in interface nxopen.pdm.DatabaseObjects
-
- setDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.StrainGageEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDataComponents(DirectionDataComponent[]) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
Sets the direction data components.
- setDataDefinition(PostScenarioDataDefinition) - Method in interface nxopen.cae.PostScenarioBuilder
-
- setDataDefinition(BaseDataLoadingWheelBuilder.DataDefinitionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDataDefinition(BaseDataLoadingWheelBuilder.DataDefinitionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDataFile(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setDataFormat(int) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Sets the data format
License requirements: None.
- setDataLengthBit(int) - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
License requirements: None.
- setDataLengthByte(int) - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
License requirements: None.
- setDataSetFile(String) - Method in interface nxopen.features.shipdesign.AddDataSetBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setDatasetName(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setDatasetName(String) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setDatasetNames(String[]) - Method in interface nxopen.CGMBuilder
-
Sets all the dataset names to be used when creating CGMs in a Teamcenter
environment.
- setDataSets(int) - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setDatasetType(String) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setDatasetType(String) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setDataSource(DataSource, PostScenarioDefinition) - Method in interface nxopen.cae.PostScenarioBuilderSlot
-
Assign data to this slot.
- setDataSource(DataSource, PostScenarioDefinition[]) - Method in interface nxopen.cae.PostScenarioBuilderSlot
-
Assign data to this slot.
- setDataSource(IPostScenarioDataSource) - Method in interface nxopen.cae.PostScenarioParameters
-
- setDataSource(String) - Method in interface nxopen.features.shipdesign.ManufacturingStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setDataSource(Parser.DataSourceTypes) - Method in interface nxopen.validate.Parser
-
License requirements: None.
- setDataSourceType(ManufacturingStockBuilder.StockDataSourceType) - Method in interface nxopen.features.shipdesign.ManufacturingStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setDataType(PlcDataType) - Method in interface nxopen.ame.PlcSymbolBuilder
-
Set data type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDataType(PlcDataType) - Method in interface nxopen.ame.PlcVendorSymbolBuilder
-
License requirements: None.
- setDataType(AttributePropertiesBaseBuilder.DataTypeOptions) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setDataType(AttributePropertiesBaseBuilder.DataTypeOptions) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setDataType(DriverMotionsData.DriverDataType) - Method in interface nxopen.motion.DriverMotionsData
-
License requirements: mechanisms ("MECHANISMS")
.
- setDataType(ExpressionFunctionBuilder.Type) - Method in interface nxopen.motion.ExpressionFunctionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDataType(LsdynaKfileGeneratorBuilder.MeshDataType) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDataTypeOption(RequirementBuilder.DataTypeOptions) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setDataTypeSource(PlcDataTypeSource) - Method in interface nxopen.ame.PlcSymbolBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDateFormatType(TableCellStyleBuilder.DateFormatTypes) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDateGroupMethodOfRule(Rule, Classifier.DateGroupMethodOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setDateTimePropertyValue(String, int, int, int, int, int, int, int) - Method in interface nxopen.cae.PropertyTable
-
Returns the date time value of the property
License requirements: None.
- setDatumCsysScaling(Tag, boolean) - Method in interface nxopen.uf.UFModlFeatures
-
- setDatumCsysVisibility(Tag, boolean) - Method in interface nxopen.uf.UFModlFeatures
-
- setDatumExtendedText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setDatumExtendedTextToggle(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setDatumExtendedTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setDatumFeatureSymbolCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumFeatureSymbolLabel(String) - Method in interface nxopen.annotations.SearchCriteriaDatumFeatureSymbolBuilder
-
License requirements: None.
- setDatumFeatureSymbolLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumFeatureSymbolOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumFeatureSymbolRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumFeatureSymbolTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumFirstReferenceDirection(WeldDatumControlDirection) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the datum reference direction type.
- setDatumIdentifier(Tag, UFGdt.DatumIdentifier) - Method in interface nxopen.uf.UFGdt
-
- setDatumIdLowerRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDatumIdUpperRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDatumKeywords(Tag, int, UFGdt.Keyword[]) - Method in interface nxopen.uf.UFGdt
-
- setDatumLabel(String) - Method in interface nxopen.annotations.DatumReference
-
Sets the datum label
License requirements: None.
- setDatumLabel(String) - Method in interface nxopen.annotations.DatumTargetData
-
Sets the datum label.
- setDatumLabel(String) - Method in interface nxopen.annotations.IDatumTarget
-
Sets the datum target label.
- setDatumLabel(String) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the initial letter for datum labels
License requirements: None.
- setDatumLabel(Tag, String) - Method in interface nxopen.uf.UFGdt
-
- setDatumLengthPastArrow(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the datum extension line past the arrow distance
License requirements: None.
- setDatumLengthPastArrow(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDatumMajorDirection(WeldDatumControlDirection) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the datum major direction type.
- setDatumMCMToggle(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setDatumMCMType(SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setDatumMovable(SearchCriteriaDatumTargetBuilder.DatumTargetMovableOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setDatumMultiple(Tag, UFGdt.MultipleDatum) - Method in interface nxopen.uf.UFGdt
-
- setDatumNamePrefix(String) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDatumObjectColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDatumObjectLayer(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDatumOnDotTerminatedArrowhead(LeaderData.ArrowheadType) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDatumOnDotTerminatedEndPoint(Point3d) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDatumOnDotTerminatedStartPoint(Point3d) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDatumPartNumber(String) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDatumPlane(Plane) - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setDatumPlaneFitting(InspectionMethodBuilder.DatumPlaneFittingTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDatumPlaneFittingMode(InspectionMethodBuilder.DatumPlaneFittingTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDatumPlaneLayer(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDatumPlanes(DatumPlane[]) - Method in interface nxopen.display.DatumPlaneGridBuilder
-
Set the list of datum planes.
- setDatumPlanes(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDatumReferences(Tag, int, int, UFGdt.DatumReference) - Method in interface nxopen.uf.UFGdt
-
- setDatumSecondReferenceDirection(WeldDatumControlDirection) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the datum reference direction type.
- setDatumSelectedPrefix(String[]) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
The datum selected prefix
License requirements: ugweld ("UG WELD")
.
- setDatumSelectedSuffix(String[]) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Selected datum suffix
License requirements: ugweld ("UG WELD")
.
- setDatumTargetCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumTargetLabelText(String) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setDatumTargetLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumTargetOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumTargetRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumTargetStandard(DatumTargetBuilder.StandardTypes) - Method in interface nxopen.annotations.DatumTargetBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDatumTargetTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDatumTargetType(SearchCriteriaDatumTargetBuilder.DatumTargetTypes) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setDatumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setDatumToggle(boolean) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setDay(DateItemBuilder.DayOfMonth) - Method in interface nxopen.DateItemBuilder
-
License requirements: None.
- setDaylightBottomLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDaylightBottomRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDbDecades(int) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
- setDbEdgeDistance(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDBFormat(SignalProcessingDBSettings.DBFormats) - Method in interface nxopen.cae.SignalProcessingDBSettings
-
License requirements: None.
- setDBItem(ConnectionDBItemData) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDbRef(double) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
- setDBReference(double) - Method in interface nxopen.cae.ResultParameters
-
- setDBReference(double) - Method in interface nxopen.cae.SignalProcessingDBSettings
-
License requirements: None.
- setDbRefPointX(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDbRefPointY(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDBscale(Result.DbScale) - Method in interface nxopen.cae.ResultParameters
-
- setDbScale(AxisDBScale) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
- setDBScaling(int) - Method in interface nxopen.cae.ResultParameters
-
Set the dB Scaling on or off
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setDdamCoefficient(RSEventSolverParameters.DdamCoefficientType, double) - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters
-
Sets the DDAM coefficient value of the specified type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDdamCoefficientA(double) - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDdamCoefficientV(double) - Method in interface nxopen.cae.responsesimulation.RSEventSolverParameters
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDeactivate(boolean) - Method in interface nxopen.geometricutilities.PartModuleOutputBuilder
-
- setDebugDumpEnabled(boolean) - Method in interface nxopen.pdm.SmartSaveBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDebugFlag(boolean) - Method in interface nxopen.RuleManager
-
License requirements: gateway ("UG GATEWAY")
.
- setDecalName(String) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setDecalReflectivity(double) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setDecimalPlace(int) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setDecimalPlaces(int) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDecimalPlaces(int) - Method in interface nxopen.annotations.ShipDraftingFramebarGeneralBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecimalPlaces(int) - Method in interface nxopen.cae.NumberFormat
-
License requirements: None.
- setDecimalPlaces(int) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setDecimalPointCharacter(DecimalPointCharacter) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the decimal point character
License requirements: None.
- setDecimalPointCharacter(DecimalPointCharacter) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDecimalPrecision(int) - Method in interface nxopen.uistyler.RealScale
-
Sets decimal precision
License requirements: None.
- setDecimals(RoundPointBuilder.Output) - Method in interface nxopen.cam.RoundPointBuilder
-
License requirements: None.
- setDecimateMethod(DecimateFacetBodyBuilder.DecimateMethodType) - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDecimationOrder(int) - Method in interface nxopen.cae.DurabilityDataControlBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setDecimationOrder(int) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDecisionAction(OverrideBuilder.DecisionActions) - Method in interface nxopen.validate.OverrideBuilder
-
License requirements: ug_checkmate ("UG Check Mate")
.
- setDecisionComments(String[]) - Method in interface nxopen.validate.OverrideBuilder
-
Sets the decision comments
The decision comments is optional.
- setDecisionUser(String) - Method in interface nxopen.validate.OverrideBuilder
-
License requirements: ug_checkmate ("UG Check Mate")
.
- setDeckContainer(boolean) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Sets the deck container flag
License requirements: None.
- setDeckEdgeOffset(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDeckEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setDeckFlangeThickness(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDeckingMaterial(PlatformEquipmentBuilder.DeckingMaterialTypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setDeckName(String) - Method in interface nxopen.features.shipdesign.DeckListItemBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setDecks(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDecksTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDeckSupportEnum(PlatformEquipmentBuilder.DeckSupportTypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setDeckThickness(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDeckThickness(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDeckThickness(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDefAction(UFClone.Action) - Method in interface nxopen.uf.UFClone
-
- setDefAssocFileCopy(boolean) - Method in interface nxopen.uf.UFClone
-
- setDefAssociative(boolean) - Method in interface nxopen.tooling.ProfileSplitBuilder
-
License requirements: None.
- setDefault(Arrangement) - Method in interface nxopen.assemblies.ComponentAssembly
-
- setDefault(int) - Method in interface nxopen.uistyler.ToolPalette
-
Indicates that this dialog item should override the accelerator
on the second mouse button, which normally accelerates to the OK button.
- setDefaultAction(PartOperationImportBuilder.ExistingPartAction) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefaultAction() - Method in interface nxopen.uistyler.ButtonLayout
-
Sets default action
License requirements: None.
- setDefaultAction() - Method in interface nxopen.uistyler.OptionToggle
-
Sets default action
License requirements: None.
- setDefaultAction() - Method in interface nxopen.uistyler.PushButton
-
Sets default action
License requirements: None.
- setDefaultAction() - Method in interface nxopen.uistyler.RadioBox
-
Set default action
License requirements: None.
- setDefaultAction() - Method in interface nxopen.uistyler.Toggle
-
Indicates that this dialog item should override the accelerator
on the second mouse button, which normally accelerates to the OK button.
- setDefaultAlternateIdContext(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefaultAlternateIdType(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefaultArcNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch
-
Sets the default arc name prefix
License requirements: None.
- setDefaultArrangement(Tag) - Method in interface nxopen.uf.UFAssem
-
- setDefaultAttribute(String, double) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Sets a default attribute value
License requirements: cam_base ("CAM BASE")
.
- setDefaultAttribute(String, String) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Sets a default attribute value
License requirements: cam_base ("CAM BASE")
.
- setDefaultAttribute(String, int) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Sets a default attribute value
License requirements: cam_base ("CAM BASE")
.
- setDefaultAttribute(String, boolean) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Sets a default attribute value
License requirements: cam_base ("CAM BASE")
.
- setDefaultBodyRulesAsString(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setDefaultBoolean(AttributeTemplatesBuilder.DefaultBooleanOptions) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setDefaultCellPrefs(UFTabnot.CellPrefs) - Method in interface nxopen.uf.UFTabnot
-
- setDefaultClassificationCode() - Method in interface nxopen.ame.PageBuilder
-
Set default Classification Code.
- setDefaultClearanceZone(Expression) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Set the expression as the default Clearance Zone.
- setDefaultClearZone(Tag, Tag) - Method in interface nxopen.uf.UFClear
-
- setDefaultColumnWidth(int) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setDefaultConicNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch
-
Sets the default conic name prefix
License requirements: None.
- setDefaultCorner(RoutingPath.DefaultCornerType) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setDefaultCurveRulesAsString(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setDefaultCurveRulesAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setDefaultCurveRulesAsString(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setDefaultCurveRulesAsString(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setDefaultDataEntryUnits(UnitCollection.UnitDefaults) - Method in interface nxopen.UnitCollection
-
Set a choice of default set of units for data entry in the given part.
- setDefaultDensity(double, UFModl.DensityUnits) - Method in interface nxopen.uf.UFModeling
-
- setDefaultDescription(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefaultDestinationFolder(String) - Method in interface nxopen.pdm.ObjectCreateBuilder
-
License requirements: None.
- setDefaultDestinationFolder(String) - Method in interface nxopen.pdm.PartOperationBuilder
-
License requirements: None.
- setDefaultDirection() - Method in interface nxopen.features.OvercrownBuilder
-
The default direction.
- setDefaultDrawDirection() - Method in interface nxopen.die.DrawBeadBuilder
-
Set the default draw direction to the -Z direction of the work coordinate system.
- setDefaultEdgeContinuity(FillHoleBuilder.ContinuityTypes) - Method in interface nxopen.features.FillHoleBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.
- setDefaultElbowNode(String) - Method in interface nxopen.preferences.RoutingPart
-
Sets the node in the part library to use for searching for the default
elbow to place during create path.
- setDefaultElementSize(boolean) - Method in interface nxopen.cae.ShipMeshAutomationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling"), nx_ship_basic ("Ship Basic Design")
.
- setDefaultEntry(ContextMenuEntry) - Method in interface nxopen.menubar.ContextMenu
-
Makes a specified menu entry the default for the menu.
- setDefaultEnvNx(String) - Method in interface nxopen.uf.UFSfl
-
- setDefaultFaceRulesAsString(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setDefaultFixingInterface(String) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
Sets input
MountingInterface
as default
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- setDefaultFolder(String) - Method in interface nxopen.pdm.PdmSession
-
Sets default folder.
- setDefaultFolder(Tag) - Method in interface nxopen.uf.UFUgmgr
-
- setDefaultFolderForPart() - Method in interface nxopen.pdm.PdmPart
-
Set default folder for the part in which it is to be saved
License requirements: None.
- setDefaultHarnessName(String) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the default harness name
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setDefaultInteger(int) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setDefaultItemType(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefaultItemType(String) - Method in interface nxopen.tooling.CloneObject
-
Sets the default item type.
- setDefaultJumperLength(String) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the default length of a jumper wire.
- setDefaultLayupOffset(LaminateLayupOffset) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDefaultLineNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch
-
Sets the default line name prefix
License requirements: None.
- setDefaultMaterialOrientation(int) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDefaultModel(String) - Method in interface nxopen.ame.Manage3DModelsBuilder
-
Sets the given 3d model as default to the associated
ProductDefinition
License requirements: None.
- setDefaultName(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefaultNameRule(String) - Method in interface nxopen.tooling.CloneObject
-
Sets the name rule (refer to the Customer Defaults).
- setDefaultNumber(double) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setDefaultObjectInformationUnits(UnitCollection.UnitDefaults) - Method in interface nxopen.UnitCollection
-
Set a choice of default set of units for object information in the given part
License requirements: None.
- setDefaultOperationType(InspectionMethodBuilder.OperationTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDefaultOwningGroup(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefaultOwningUser(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefaultParameters(UFFacet.Parameters) - Method in interface nxopen.uf.UFFacet
-
- setDefaultPlanarFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the default planar face for the hole in the fastener assembly
License requirements: None.
- setDefaultPlane(PmiDefaultPlane) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the default annotation plane for PMI symbols
License requirements: None.
- setDefaultPlane() - Method in interface nxopen.display.DynamicSectionBuilder
-
Set current section plane to its default definition.
- setDefaultPlaneAxis(DynamicSectionTypes.Axis) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setDefaultPortExtensionLength(double) - Method in interface nxopen.routing.SplinePathBuilder
-
Sets the default port extension length to be used when creating or editing points at port
locations that do not already have an extension .
- setDefaultPrefs(UFPlist.Prefs) - Method in interface nxopen.uf.UFPlist
-
- setDefaultProjectInformation(String[], Session.ProjectAssignmentState[]) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Set default projects information
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefaultReferenceSets(String[]) - Method in interface nxopen.LoadOptions
-
Sets the list of reference sets to be looked
for, in order, when an assembly is loaded.
- setDefaultRefSets(int, String[]) - Method in interface nxopen.uf.UFAssem
-
- setDefaultRegionStartType(NcmSubopBuilder.DefaultRegionStartTypes) - Method in interface nxopen.cam.NcmSubopBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDefaults() - Method in interface nxopen.display.DynamicSectionBuilder
-
Set current section to the default values.
- setDefaults() - Method in interface nxopen.preferences.ViewSection
-
Set current view section preferences to the default
customer default values.
- setDefaultScallopTypes(String) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Set the default scallop types for the profile cutout builder.
- setDefaultSectionPrefs(UFTabnot.SectionPrefs) - Method in interface nxopen.uf.UFTabnot
-
- setDefaultSketchNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch
-
Sets the default sketch name prefix
License requirements: None.
- setDefaultsOnBaseDefinitionAttributeHolder() - Method in interface nxopen.ame.InsertObjectBuilder
-
Set default properties on base def attr holder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDefaultSplineNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch
-
Sets the default spline name prefix
License requirements: None.
- setDefaultStandardTextFont(String, VisualizationFonts.StyleType, int) - Method in interface nxopen.preferences.VisualizationFonts
-
Modifies settings for the default standard text font
License requirements: None.
- setDefaultStlParams() - Method in interface nxopen.uf.UFStd
-
- setDefaultStock(CharacteristicList, CharacteristicList) - Method in interface nxopen.preferences.RoutingStock
-
Sets the current default stock to assign when creating paths.
- setDefaultStockStyle(StockStyle) - Method in interface nxopen.preferences.RoutingStock
-
Sets the default stock style
License requirements: routing_base ("Routing Basic")
.
- setDefaultString(String) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setDefaultSymbol(String) - Method in interface nxopen.ame.Manage2dSymbolsBuilder
-
Sets the given 2d symbol as default on the input object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDefaultTemperatureOption(boolean) - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDefaultTemplate(String) - Method in interface nxopen.cae.xyplot.BaseTemplateManager
-
Sets the default template file.
- setDefaultText(String) - Method in interface nxopen.annotations.TableColumnBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDefaultThickness(String) - Method in interface nxopen.features.ShellBuilder
-
Sets the default thickness for the shelled body.
- setDefaultThicknessFlip(boolean) - Method in interface nxopen.features.ShellBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDefaultToPoint(Point3d) - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Set the default to point.
- setDefaultUpdateFailureAction(Update.FailureOption) - Method in interface nxopen.Update
-
Sets the default action to take when an object fails to update.
- setDefaultValue(double) - Method in interface nxopen.report.DoubleArgument
-
License requirements: None.
- setDefaultValue(int) - Method in interface nxopen.report.EnumerationArgument
-
License requirements: None.
- setDefaultValue(int) - Method in interface nxopen.report.IntegerArgument
-
License requirements: None.
- setDefaultValue(String) - Method in interface nxopen.report.StringArgument
-
License requirements: None.
- setDefaultVertexNamePrefix(String) - Method in interface nxopen.preferences.SessionSketch
-
Sets the default vertex name prefix
License requirements: None.
- setDefaultVrmlParams() - Method in interface nxopen.uf.UFStd
-
- setDefCi(UFClone.CheckinData) - Method in interface nxopen.uf.UFClone
-
- setDefCiCommentChecking(boolean, String) - Method in interface nxopen.uf.UFClone
-
- setDefCo(UFClone.CheckoutData) - Method in interface nxopen.uf.UFClone
-
- setDefCreColor(int) - Method in interface nxopen.uf.UFObj
-
- setDefCreLineFont(int) - Method in interface nxopen.uf.UFObj
-
- setDefCreWidth(int) - Method in interface nxopen.uf.UFObj
-
- setDefDirectory(String) - Method in interface nxopen.uf.UFClone
-
- setDeferCurveUpdate(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setDeferCuttingStatus(boolean) - Method in interface nxopen.cam.PlanarOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDefFolder(String) - Method in interface nxopen.uf.UFClone
-
- setDefGroup(String) - Method in interface nxopen.uf.UFClone
-
- setDefineBy(RenameAndExportComponentBuilder.DefinitionType) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDefineByPathOption(boolean) - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setDefineByViewOrHolesEnum(HoleManufacturingNoteBuilder.DefineByViewOrHoles) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDefineConnectVector(boolean) - Method in interface nxopen.tooling.CoolingConnectBuilder
-
License requirements: None.
- setDefinedBy(SpringbackCompensationBuilder.DefinedByType) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setDefineGlobalSizeToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the define global size toggle of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setDefineSharedBodyInput(boolean) - Method in interface nxopen.geometricutilities.PartModuleInputBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDefineStartPoint(boolean) - Method in interface nxopen.tooling.CoolingConnectBuilder
-
License requirements: None.
- setDefineStep(MWDefineSheetsBuilder.DefineStepType) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
License requirements: None.
- setDefiningComponents(Component[]) - Method in interface nxopen.positioning.ComponentConstraintGroup
-
Sets the defining constraints within the group.
- setDefiningConstraints(ComponentConstraint[]) - Method in interface nxopen.positioning.ComponentConstraintGroup
-
Sets the defining constraints within the group.
- setDefiningObjectsAdded(boolean) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDefiningPoint(int, Point3d, int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
Sets a defining point
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDefiningType(SplinePathBuilder.DefiningTypes) - Method in interface nxopen.routing.SplinePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setDefinition(TBSGroupDefinition.DefinitionType) - Method in interface nxopen.cae.optimization.TBSGroupDefinition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setDefinition(String) - Method in interface nxopen.motion.AdvancedSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDefinition(String) - Method in interface nxopen.motion.TextBasedElementBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDefinitionMethod(SeamBuilder.DefinitionMethods) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setDefinitionMethod(SplineBeamBuilder.DefinitionMethodType) - Method in interface nxopen.motion.SplineBeamBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDefinitionMethodOption(RequirementBuilder.DefinitionMethodOptions) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setDefinitionRectangularCorner(Point) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setDefinitionRectangularLengthDirection(Direction) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setDefinitionRectangularPlane(Plane) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setDefinitionReferenceProperties(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setDefinitions(String[]) - Method in interface nxopen.cae.FunctionBuilder
-
Sets definition strings of a math function.
- setDefinitions(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setDefItemType(String) - Method in interface nxopen.uf.UFClone
-
- setDefNaming(UFClone.NamingTechnique) - Method in interface nxopen.uf.UFClone
-
- setDefNmCopy(UFClone.CopyNmOpt) - Method in interface nxopen.uf.UFClone
-
- setDefNum(int) - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
License requirements: None.
- setDeformation(boolean) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setDeformationDirectionMethod(GlobalShapingBuilder.DirectionMethodType) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDeformationDirectionReverse(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDeformationDirectionVector(Direction) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDeformationFactor(double) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setDeformationType(Result.DeformationScale) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setDeformationType(GlobalShapingBuilder.DeformationTypeValues) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDefOwner(String) - Method in interface nxopen.uf.UFClone
-
- setDefPdmDesc(String) - Method in interface nxopen.uf.UFClone
-
- setDefPdmName(String) - Method in interface nxopen.uf.UFClone
-
- setDefStationNum(int) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDefValidationOptions(UFClone.ValidationOpts) - Method in interface nxopen.uf.UFClone
-
- setDefVector(Direction) - Method in interface nxopen.tooling.ProfileSplitBuilder
-
License requirements: None.
- setDegree(SpringbackCompensationBuilder.DegreeType) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setDegree(int) - Method in interface nxopen.facet.DivideFacetFaceBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setDegree(int) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDegree(int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDegree(int) - Method in interface nxopen.features.StudioSplineBuilder
-
- setDegree(int) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDegree(int) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setDegree(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDegree(int) - Method in interface nxopen.geometricutilities.Rebuild
-
Sets the degree when rebuild type is none.
- setDegree(int) - Method in interface nxopen.SketchOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setDegreeType(Rebuild.DegreeTypes) - Method in interface nxopen.geometricutilities.Rebuild
-
Sets the degree type when rebuild type is none.
- setDelay(int) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setDelay(int) - Method in interface nxopen.motion.AnimationControl
-
Sets the animation delay
License requirements: mechanisms ("MECHANISMS")
.
- setDelay(int) - Method in interface nxopen.motion.ArticulationControl
-
License requirements: mechanisms ("MECHANISMS")
.
- setDelay(int) - Method in interface nxopen.motion.SpreadsheetRunControl
-
License requirements: mechanisms ("MECHANISMS")
.
- setDelayEvaluation(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not the sketch should be evaluated when a constraint is
added to the sketch.
- setDelayShipManufacturingFeatureUpdate(boolean) - Method in interface nxopen.features.ShipCollection
-
Sets the delay ship manufacturing feature update flag.
- setDelayUpdate(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataSourceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDelayUpdateOnCreation(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDelayUpdateOnCreation(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flag indicating whether the newly created views should update immediately even
when the view update is delayed.
- setDelayViewUpdate(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDelayViewUpdate(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flag indicating whether to delay update of the drafting views during system
initiated drawing updates
License requirements: None.
- setDeleteBrokenInterpartLinks(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether or not to delete all inter-part links
where one or more components in that inter-part link have been removed.
- setDeleteButtonClicked(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDeleteButtonSensitive(boolean) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setDeleteChainsAtStart(boolean) - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setDeleteChamferLabel(boolean) - Method in interface nxopen.features.LabelChamferBuilder
-
License requirements: None.
- setDeleteChildFeaturesOption(SessionModeling.DeleteChildFeaturesOptionType) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setDeleteConditionalObject(boolean) - Method in interface nxopen.ame.AMEManager
-
Set the delete option
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDeleteDangling(boolean) - Method in interface nxopen.cae.ElementDeleteBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDeletedHolesDisplay(HoleTableSettingsFormatBuilder.DeletedHolesDisplayType) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDeletedList(int[]) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Set deleted list value.
- setDeletedPointsColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDeleteDuplicateLights(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to delete duplicate light source objects
from the part file.
- setDeleteEmptyUserDefinedModelViews(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setDeleteHandler(ListBox.DeleteCallback) - Method in interface nxopen.blockstyler.ListBox
-
Sets the Delete handler.
- setDeleteHandler(SetList.DeleteCallback) - Method in interface nxopen.blockstyler.SetList
-
Sets the Delete handler.
- setDeleteHoles(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDeleteInvalidAttributes(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to delete all invalid user attributes
from the part file.
- setDeleteLabel(boolean) - Method in interface nxopen.features.LabelNotchBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDeleteLocationObjects(DesignRuleViolationLocationCollection.DeleteOption) - Method in interface nxopen.routing.DesignRuleViolationLocation
-
Sets the function returns delete location objects,
which is an option for deletion of violation location objects.
- setDeleteMaterials(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to delete all materials
from the part file.
- setDeleteMeasurementPoints(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeleteMethod(ReliefDesignBuilder.MethodOfDelete) - Method in interface nxopen.tooling.ReliefDesignBuilder
-
License requirements: None.
- setDeleteOldComponentsToggle(boolean) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDeleteOriginalFeature(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDeleteOrphan(boolean) - Method in interface nxopen.cae.ElementConnectivityBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDeleteOverstock(boolean) - Method in interface nxopen.preferences.RoutingStock
-
Sets the delete overstock flag during deletion of last stock covered by
the overstock
License requirements: routing_base ("Routing Basic")
.
- setDeletePartialBlend(boolean) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDeletePreviousDiagrams(boolean) - Method in interface nxopen.features.TabNoteCfgBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setDeleteSectionLine(boolean) - Method in interface nxopen.drawings.DraftingView
-
Set the section line delete option, If false section line will not be deleted with section view
License requirements: drafting ("DRAFTING")
.
- setDeleteSource(ObjectSinkBuilder.DeleteSourceType) - Method in interface nxopen.mechatronics.ObjectSinkBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setDeleteSpreadSheetData(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to delete all spreadsheets from
the part file.
- setDeleteState(int, int, boolean) - Method in interface nxopen.geometricutilities.PatternDefinition
-
Sets the delete state for the instance at the specified indicies.
- setDeleteUnusedExpressions(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to delete expressions that are
not used in the part.
- setDeleteUnusedExtractReferences(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to delete all unused edge/face references in extract features
from the part file.
- setDeleteUnusedFonts(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to remove character fonts
that are not used in any drafting text in the current part.
- setDeleteUnusedObjects(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to delete all extraneous
objects from the work part
License requirements: None.
- setDeleteUnusedUnits(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to remove character fonts
that are not used in any drafting text in the current part.
- setDeleteUserSafePoints(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeleteVisualEditorData(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to delete Visual Editor data
from the part file.
- setDelimiter(AspectPrefixBuilder.DelimiterType) - Method in interface nxopen.ame.AspectPrefixBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDelimiter(String) - Method in interface nxopen.preferences.PartDrafting
-
Sets the delimiter
License requirements: None.
- setDeltaCamber(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDeltaEnum(ModlMotion.Delta) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: None.
- setDeltaStaticRadius(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDeltaToe(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDeltaWidth(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDeltaX(double) - Method in interface nxopen.cam.DeltaMoveBuilder
-
License requirements: None.
- setDeltaX(double) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeltaX(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setDeltaX(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDeltaX(double) - Method in interface nxopen.geometricutilities.ModlMotion
-
- setDeltaXc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeltaXc(double) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaXc(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaXC(double) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setDeltaXc(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaXCoordinate(double) - Method in interface nxopen.diagramming.BulkEditBuilder
-
Sets the delta value of X coordinate for bulk moving.
- setDeltaXCoordinate(double) - Method in interface nxopen.pid.BulkEditBuilder
-
Sets the delta value of X coordinate for bulk moving.
- setDeltaXm(double) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaY(double) - Method in interface nxopen.cam.DeltaMoveBuilder
-
License requirements: None.
- setDeltaY(double) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeltaY(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setDeltaY(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDeltaY(double) - Method in interface nxopen.geometricutilities.ModlMotion
-
- setDeltaYc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeltaYc(double) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaYc(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaYC(double) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setDeltaYc(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaYCoordinate(double) - Method in interface nxopen.diagramming.BulkEditBuilder
-
Sets the delta value of Y coordinate for bulk moving.
- setDeltaYCoordinate(double) - Method in interface nxopen.pid.BulkEditBuilder
-
Sets the delta value of Y coordinate for bulk moving.
- setDeltaYm(double) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaZ(double) - Method in interface nxopen.cam.DeltaMoveBuilder
-
License requirements: None.
- setDeltaZ(double) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeltaZ(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setDeltaZ(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDeltaZ(double) - Method in interface nxopen.geometricutilities.ModlMotion
-
- setDeltaZc(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeltaZc(double) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaZc(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDeltaZC(double) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setDeltaZm(double) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setDenominator(double) - Method in interface nxopen.drawings.ViewScaleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDenominator(int) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDenseColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
- setDensity(double) - Method in interface nxopen.Body
-
Sets the solid density of the body.
- setDensity(double) - Method in interface nxopen.geometricanalysis.SolidDensity
-
License requirements: None.
- setDensity(int) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setDensity(double) - Method in interface nxopen.preferences.PartModeling
-
Sets the density.
- setDensityMove(double) - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setDensityUnit(PartModeling.DensityUnitType) - Method in interface nxopen.preferences.PartModeling
-
Sets the density unit
License requirements: None.
- setDensityUpdateOption(TBSTopologySensitivityOptimizationParameters.DensityUpdate) - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setDeparture(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setDepartureMethod(NcmTransferBuilder.AppDepMethodTypes) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDeparturePathMode(TurnAvoidanceDepartureBuilder.DeparturePathModes) - Method in interface nxopen.cam.TurnAvoidanceDepartureBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDeparturePostCommands(TaggedObject) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepartureToolAxis(SmartObject) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepartureToolAxisOption(NcmTransferBuilder.AppDepToolAxisOptions) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepartureVector(SmartObject) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepCalcSymblSize(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDepDispType(DisplayPropertiesBuilder.DepDispTypeEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDepDomColor(DisplayPropertiesBuilder.DepDomColorEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDependentDomain(FieldDomain) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
Set Dependent Domain
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDependentDomain(FieldDomain) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
Set Dependent Domain
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDependentDomain(FieldDomain) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set Dependent Domain
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDependentDomainName(String) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
- setDependentDomainName(String) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
- setDependentDomainName(String) - Method in interface nxopen.cae.ResultsReductionBuilder
-
- setDependentEdgeDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDependentFileSaveAsOption(PartFromPartBuilder.FileSaveAs) - Method in interface nxopen.pdm.PartFromPartBuilder
-
Sets the dependent files to save during the save as operation
Deprecated in NX10 for "Save As of master parts" operation.
- setDependentFileSaveAsOption(PartOperationBuilder.DependentFileSaveAs) - Method in interface nxopen.pdm.PartOperationBuilder
-
- setDependentFilesToCopyOption(PartOperationCopyBuilder.CopyDependentFiles) - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
License requirements: None.
- setDependentView(View) - Method in interface nxopen.geometricutilities.ModlMotion
-
Set the view for view dependent drafting objects
License requirements: None.
- setDepLabelValues(DisplayPropertiesBuilder.DepLabelValueEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDepRangeMax(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDepRangeMin(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDepSelColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDepSymbolSize(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDepth(int) - Method in interface nxopen.cae.xyplot.BarStyle3DSetting
-
License requirements: None.
- setDepth(double) - Method in interface nxopen.cam.HoleBossSet
-
License requirements: cam_base ("CAM BASE")
.
- setDepth(double) - Method in interface nxopen.cam.ReliefCut
-
License requirements: cam_base ("CAM BASE")
.
- setDepth(double) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Sets the depth of the handling core.
- setDepth(double) - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Sets the depth of handling cores.
- setDepth(double) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the depth of the die hole.
- setDepth(double) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the depth of die holes.
- setDepth(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the depth of the keyway.
- setDepth(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the depth of keyways.
- setDepth(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDepth(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDepth(String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets the depth of the hole.
- setDepth(String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the depth expression.
- setDepth(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
- setDepth(String) - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
- setDepth(String) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
- setDepthAndTipAngle(String, String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets depth and tip angle parameters for the hole.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanArcBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionScanLineBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthDistance(double) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthEndPoint(Point) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepthLimit(HoleBossGeom.DepthLimitTypes) - Method in interface nxopen.cam.HoleBossGeom
-
- setDepthLimit(HoleBossSet.DepthLimitTypes) - Method in interface nxopen.cam.HoleBossSet
-
License requirements: cam_base ("CAM BASE")
.
- setDepthMeasurementDatum(HoleTableSettingsFormatBuilder.DepthMeasurementDatumType) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanArcBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionScanLineBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(InspectionMoveBuilder.DepthMethodTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDepthMethod(ShelfBuilder.DepthMethods) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setDepthMethod(StepBuilder.DepthMethods) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setDepthMode(BladeCutLevels.DepthModeTypes) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setDepthOfFieldToggle(boolean) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setDepthOption(CenterlineDrillTurningBuilder.DepthTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepthOption(ThreadTurningBuilder.DepthOptionTypes) - Method in interface nxopen.cam.ThreadTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepthOption(HolePackageBuilder.HoleDepthOptions) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDepthOption(ConicCrossSection.DepthMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDepthOption(EndHoleData.HoleDepthOptions) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDepthPerCut(BladeCutLevels.DepthPerCutTypes) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setDepthPerRevolution(CylinderMillingBuilder.DepthPerRevolutionTypes) - Method in interface nxopen.cam.CylinderMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepthReference(CenterlineDrillTurningBuilder.DepthReferenceTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepthRootOpeningNumberOfWelds(String) - Method in interface nxopen.annotations.LineWeldSideData
-
Sets the depth or root opening or number of welds as the case may be
License requirements: None.
- setDepthSide(LouverBuilder.DepthSideOptions) - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Sets the depth side for the louver.
- setDepthSide(NormalCutoutBuilder.DepthSideOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the depth side for the normal cutout.
- setDepthSortedWireframe(boolean) - Method in interface nxopen.preferences.VisualizationLine
-
Sets the depth sorted wireframe.
- setDepthStepMethod(MultiplePassesBuilder.StepMethodTypes) - Method in interface nxopen.cam.MultiplePassesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDepthThreshold(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
THE depth threshold
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setDepthToleranceParms(Tag, UFGdt.DepthTolerance) - Method in interface nxopen.uf.UFGdt
-
- setDepthType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setDepthType(ProbeCalibrateStylusMoveBuilder.Depth) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setDepthType(ProbeInspectBorebossMoveBuilder.Depth) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setDepthType(DimpleBuilder.DepthTypeOptions) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Sets the Direction in which the Dimple is punched.
- setDepthType(DrawnCutoutBuilder.DepthTypeOptions) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Sets the Direction in which the Drawn Cutout is punched.
- setDepthType(NormalCutoutBuilder.DepthTypeOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the depth type for the normal cutout.
- setDepthUnit(ReliefCut.DepthUnits) - Method in interface nxopen.cam.ReliefCut
-
License requirements: cam_base ("CAM BASE")
.
- setDepthValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setDerivebeamres(boolean) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDerived(boolean) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDescription(String) - Method in interface nxopen.ame.BasicPropertiesBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDescription(String) - Method in interface nxopen.ame.CabinetDesignBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDescription(String) - Method in interface nxopen.ame.EditQueryBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDescription(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDescription(String) - Method in interface nxopen.ame.ImportEplanPageMacroBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDescription(String) - Method in interface nxopen.ame.PageBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDescription(String) - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
License requirements: None.
- setDescription(String) - Method in interface nxopen.ame.PlcSymbolBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDescription(String) - Method in interface nxopen.ame.QueryBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDescription(String) - Method in interface nxopen.ame.SubnetBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDescription(String) - Method in interface nxopen.assemblies.productinterface.PropertyBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setDescription(String) - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDescription(String) - Method in interface nxopen.cae.aerostructures.MarginSolutionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDescription(String[]) - Method in interface nxopen.cae.CaePart
-
Sets the description assoicated with the Cae part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDescription(String) - Method in interface nxopen.cae.DurSpecialistLoadProviderBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setDescription(String[]) - Method in interface nxopen.cae.FemCreationOptions
-
Set FEM Part file descriptive text
License requirements: None.
- setDescription(String) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setDescription(String[]) - Method in interface nxopen.cae.optimization.NameDescription
-
Sets the description
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setDescription(String[]) - Method in interface nxopen.cae.ResultProbeBuilder
-
Sets the description
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDescription(String[]) - Method in interface nxopen.cae.SimConditionSequence
-
Sets the condition sequence description
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDescription(String) - Method in interface nxopen.cae.SimConditionTimeStep
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDescription(String) - Method in interface nxopen.cae.SimLoadRecipe
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDescription(String) - Method in interface nxopen.cam.NCGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDescription(String) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDescription(String) - Method in interface nxopen.diagramming.SheetBuilder
-
License requirements: None.
- setDescription(String) - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDescription(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setDescription(String[]) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Sets the loading descriptions.
- setDescription(String) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDescription(String[]) - Method in interface nxopen.fields.Field
-
Update the description of the field.
- setDescription(String, String) - Method in interface nxopen.gateway.BookmarkFile
-
Changes the description of an existing bookmark file.
- setDescription(String) - Method in interface nxopen.layer.Category
-
Sets the category's description, if one exists
License requirements: None.
- setDescription(String[]) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
Description for conveyor station is set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setDescription(String[]) - Method in interface nxopen.mechatronics.ExpressionBlockBuilder
-
Sets description lines.
- setDescription(String[]) - Method in interface nxopen.mechatronics.ObjectInformationBuilder
-
Sets the description.
- setDescription(String) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDescription(String) - Method in interface nxopen.PhysicalMaterial
-
Sets the material description
License requirements: None.
- setDescription(String) - Method in interface nxopen.PhysicalMaterialBuilder
-
License requirements: None.
- setDescription(String) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setDescription(String) - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setDescription(String) - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setDescription(String) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setDescription(String) - Method in interface nxopen.Step203Creator
-
- setDescription(String) - Method in interface nxopen.Step214Creator
-
- setDescription(String) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setDescription(String) - Method in interface nxopen.tooling.FlowAnalysisBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setDescription(Tag, UFGdt.Description) - Method in interface nxopen.uf.UFGdt
-
- setDescription(Tag, String) - Method in interface nxopen.uf.UFPart
-
- setDescription(String) - Method in interface nxopen.visualreporting.Condition
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setDescription(String) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setDescriptionOfCondition(Condition, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setDescriptionOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setDescriptions(String[]) - Method in interface nxopen.cae.responsesimulation.ObjectLabel
-
Sets the description for the object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDescriptionString(String[]) - Method in interface nxopen.cae.responsesimulation.DynamicResultEvaluationSettingBuilder
-
Sets the description
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDescriptiveCategory(String) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setDescriptiveCategoryOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setDescriptiveModifier(String) - Method in interface nxopen.annotations.PartIdentificationBuilder
-
License requirements: None.
- setDescriptiveName(String) - Method in interface nxopen.tooling.ReusableObject
-
License requirements: None.
- setDescriptiveName(String) - Method in interface nxopen.tooling.SelectReuseLibraryItemBuilder
-
Sets the descriptive name
License requirements: None.
- setDescriptiveName(String) - Method in interface nxopen.tooling.SpreadsheetDataParameter
-
License requirements: None.
- setDescriptorCharxType(RoutePartDescriptor.CharxType) - Method in interface nxopen.routing.RoutePartDescriptor
-
License requirements: routing_base ("Routing Basic")
.
- setDescriptorName(String) - Method in interface nxopen.cae.GeneralGeometryBeamSectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDescriptorName(String) - Method in interface nxopen.cae.StandardBeamSectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDescriptorName(String) - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDescriptorSourceType(RoutePartDescriptor.SourceType) - Method in interface nxopen.routing.RoutePartDescriptor
-
License requirements: routing_base ("Routing Basic")
.
- setDesignConstraints(DAOConstraint[]) - Method in interface nxopen.cae.optimization.DAOSolution
-
- setDesignCreation(InspectionConstructedFeatureBuilder.DesignCreationType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDesignCycleIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDesignData(BaseDataWheelBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDesignElementAttributeValue(DisplayableObject, ManufacturingPreparationBuilder.AttributeType, String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Set the attribute value of the given design element.
- setDesignElementState(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setDesignElementType(String) - Method in interface nxopen.assemblies.AddComponentBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDesignElementType(String) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDesignElementType(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setDesignerName(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDesignFeatureGroup(Feature) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDesignGroup(boolean) - Method in interface nxopen.features.PartModuleBuilder
-
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- setDesignHours(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDesignOffsetGeometry(NXObject) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDesignOption(BurringInsertBuilder.DesignOptions) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDesignOption(FormingInsertBuilder.DesignOptions) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setDesignPrice(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDesignResponse(TBSDesignResponse) - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setDesignResponse(TBSDesignResponse) - Method in interface nxopen.cae.optimization.TBSSingleObjective
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setDesignSequence(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setDesignSequence(IntermediateStageBuilder.DesignSequences) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.CastReliefParentBuilder
-
Sets the design status of cast relief, if true the cast relief will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.ConnectProfileParentBuilder
-
Sets the design status of die connecting profiles
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.DeckParentBuilder
-
Sets the design status of deck, if true the deck will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the design status of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Sets the design status of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Sets the design status of the handling core, if true the handling core will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Sets the design status of handling cores, if true the handling cores will be built into the model, if false they will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the design status of the die hole, if true the hole will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the design status of die holes, if true the holes will be built into the model, if false they will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the design status of the keyway, if true the keyway will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the design status of keyways, if true the keyways will be built into the model, if false they will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.PadChildBuilder
-
Sets the design status of the die pad, if true the pad will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.PadParentBuilder
-
Sets the design status of die pads, if true the pads will be built into the model, if false they will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the design status of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder
-
Sets the design status of pierce holes
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.PointChildBuilder
-
Sets the design status of the point, if true the point will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.PointParentBuilder
-
Sets the design status of points, if true the points will be built into the model, if false they will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.PressureSystemChildBuilder
-
Sets the design status of the pressure system, if true the pressure system will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the design status of pressure systems, if true the pressure systems will be built into the model, if false they will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.RibChildBuilder
-
Sets the design status of the die rib, if true the rib will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.RibParentBuilder
-
Sets the design status of die ribs, if true the ribs will be built into the model, if false they will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.RotorSectionBuilder
-
Sets the design status of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Sets the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Sets the design status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.ThroatChildBuilder
-
Sets the design status of the throat section, if true the throat section will be built into the model, if false it will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.ThroatParentBuilder
-
Sets the design status of the throat sections, if true the throat sections will be built into the model, if false they will not.
- setDesignStatus(boolean) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Sets the design status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- setDesignStatus(boolean) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Sets the design status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- setDesignStudyObjectives(String[], NXObject[], DesignStudyBuilder.DesignStudyAttributeType[], double[], double[], double[], double[]) - Method in interface nxopen.optimization.DesignStudyBuilder
-
Sets the objectives
License requirements: None.
- setDesignStudyVariables(String[], NXObject[], DesignStudyBuilder.DesignStudyAttributeType[], double[], double[], DesignStudyBuilder.DesignStudyDistributeType[], double[], double[], double[], int[]) - Method in interface nxopen.optimization.DesignStudyBuilder
-
Sets the variables
License requirements: None.
- setDesignTasks(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDesignTool(InsertAuxiliaryBuilder.DesignToolOption) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setDesignToolOpt(DieBaseBuilder.DesignToolOption) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDesignVarActive(int, boolean) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets a specific design variable as active or not
License requirements: nx_correl_update ("FE Model Update")
.
- setDesignVariableLabels(String[]) - Method in interface nxopen.cae.ModelUpdateSensitivityViewerBuilder
-
Sets the design variable labels
License requirements: nx_correl_update ("FE Model Update")
.
- setDesignVariablesInitialValue(double) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets the value of the design variables.
- setDesignVariableType(ModelUpdateDesignVariablesRapidCreateBuilder.DesignVariableTypeEnum) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setDesignVarLinearRange(double) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setDesignVarLowerBound(int, double) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets lower bound for a specific design variable
License requirements: nx_correl_update ("FE Model Update")
.
- setDesignVarUpperBound(int, double) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets upper bound for a specific design variable
License requirements: nx_correl_update ("FE Model Update")
.
- setDesignVarValue(int, double) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets value for a specific design variable
License requirements: nx_correl_update ("FE Model Update")
.
- setDesignVarWeight(double) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setDesignVarWeight(int, double) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets weight for a specific design variable
License requirements: nx_correl_update ("FE Model Update")
.
- setDestEnum(FaceAnnotationBuilder.DrwDestination) - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setDestForUnselectedLayer(int) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setDestination(String) - Method in interface nxopen.ame.SaveToLibraryBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDestination(SurfaceWeldBuilder.DestinationTypes) - Method in interface nxopen.weld.SurfaceWeldBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setDestination(WeldJointBuilder.DestinationTypes) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setDestinationCoordinateSystem(CoordinateSystem) - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDestinationCoordinateSystem(NXMatrix) - Method in interface nxopen.PartImporter
-
Sets the destination coordinate system.
- setDestinationCoordinateSystemSpecification(PartImporter.DestinationCoordinateSystemSpecificationType) - Method in interface nxopen.PartImporter
-
Sets the destination coordinate system specification.
- setDestinationCsys(CoordinateSystem) - Method in interface nxopen.features.OptimizeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDestinationElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
Sets the destination elements
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDestinationElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
Sets the destination elements
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDestinationElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
Sets the destination elements
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDestinationFilename(String) - Method in interface nxopen.gateway.CopyCutBuilder
-
License requirements: None.
- setDestinationFolder(SimLbcFolder) - Method in interface nxopen.cae.AutoBCBuilder
-
Sets the destination folder of
SimBC
object
License requirements: None.
- setDestinationFolder(SimLbcFolder) - Method in interface nxopen.cae.SimBCBuilder
-
Sets the destination folder of
SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX9.0.0
- setDestinationFolder(String) - Method in interface nxopen.pdm.ExportWorksetForReferenceBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDestinationFolder(String) - Method in interface nxopen.tooling.EjectorTableBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setDestinationFrame(Point3d, Matrix3x3) - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Sets the destination coordinate system used for the flattened result.
- setDestinationInterruptionPoint(AMEExtendedObject) - Method in interface nxopen.ame.InterruptionPointBuilder
-
Set the destination interruption point to link to
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDestinationNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
Sets the destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDestinationNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
Sets the destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDestinationOpt(PasteSpecialBuilder.DestinationOption) - Method in interface nxopen.PasteSpecialBuilder
-
License requirements: None.
- setDestinationPart(String) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setDestinationPath(String) - Method in interface nxopen.layout2d.PublishComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setDestinationPcsEnum(InspectionConstructedFeatureBuilder.DestPcsEnumType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDestinationPoint(Point3d) - Method in interface nxopen.PartImporter
-
Sets the destination point.
- setDestinationPoint(Point) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setDestinationPoint(Point) - Method in interface nxopen.tooling.InsertEditToolsBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDestinationPosition(Point) - Method in interface nxopen.display.LightBuilder
-
License requirements: None.
- setDestinationTeamcenterFolder(String) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setDestinationTeamcenterFolder(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setDestinationView(View) - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDestinationView(View) - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDestPropertyId(int) - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setDetachNodeOption(boolean) - Method in interface nxopen.cae.ElementDetachBuilder
-
License requirements: None.
- setDetachObject(boolean) - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setDetachType(MovePathBuilder.DetachTypes) - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setDetailedMessage(boolean) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDetailedOutput(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setDetailID(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setDetailLevel(BillOfMaterialBuilder.DetailLevelType) - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setDetailLevel(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setDetailReason(String[]) - Method in interface nxopen.validate.OverrideBuilder
-
Sets the detail reason
The detail reason is optional unless override reason configuration is mandatory in Teamcenter.
- setDetails(String[]) - Method in interface nxopen.ame.EplanSettingsBuilder
-
Sets the details
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDetails(String[]) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the detailed description of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDetails(String[]) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the details of the form task.
- setDetails(String[]) - Method in interface nxopen.die.LineupBuilder
-
Sets the detailed description of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDetails(String[]) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the detailed description of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDetails(String[]) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the detailed description of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDetails(String[]) - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
Sets the detailed information of the feature.
- setDetectAirCuttingTime(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setDetectFeatureEdges(boolean) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setDeviateFromStandard(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDeviation(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setDeviationalTolerance(double) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setDeviationalToleranceInFlatSolid(boolean, double) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the deviational tolerance during Flat Solid simplification
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setDeviationalToleranceInFlatSolid(boolean, double) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the deviational tolerance during Flat Solid simplification
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setDeviationIntervals(int) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDeviationOption(DeviationChecking.DeviationOptions) - Method in interface nxopen.geometricanalysis.DeviationChecking
-
License requirements: None.
- setDevice(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setDeviceId(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setDeviceIndex(int) - Method in interface nxopen.cae.xyplot.BasePlotParameters
-
License requirements: None.
- setDeviceName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeviceType(InspectionCmmCommandBuilder.DeviceTypeOptions) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDeviceType(ReadWriteDeviceBuilder.DeviceType) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder
-
Sets device type.
- setDevLength(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
- setDevTolPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDfaFiles(String[]) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Set the dfa files
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDiagonalPoints(Point, Point) - Method in interface nxopen.cae.BoxBoundingVolume
-
Sets the diagonal points for the Box Bounding Volume.
- setDialogBarDecimalPlaces(int) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the dialog box decimal places
License requirements: None.
- setDialogBarTracking(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the dialog bar tracking flag
License requirements: None.
- setDialogBoxDecimalPlaces(int) - Method in interface nxopen.preferences.PartUserInterface
-
Sets the dialog box decimal places
License requirements: None.
- setDialogDirectory(UFUi.DialogDirId, String) - Method in interface nxopen.uf.UFUi
-
- setDialogDisplay(boolean) - Method in interface nxopen.uf.UFUgmgr
-
- setDialogFilter(UFUi.DialogFilterId, String) - Method in interface nxopen.uf.UFUi
-
- setDialogOperation(PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PartOperationBuilder
-
Sets the dialog operation.
- setDialogOption(ReusePositioningObjectBuilder.DialogOptions) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setDialogSizing(int) - Method in interface nxopen.blockstyler.CompositeBlock
-
License requirements: None.
- setDialogSizingAsString(String) - Method in interface nxopen.blockstyler.CompositeBlock
-
License requirements: None.
- setDialogType(PenetrationRequestBuilder.RequestDialogType) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Set the dialog type
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setDialogType(PenetrationRequestBuilder.RequestDialogType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setDialogViolationId(int) - Method in interface nxopen.routing.DesignRuleViolationViewer
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setDiamDimLineAng(double) - Method in interface nxopen.annotations.BaseDiameterDimension
-
- setDiameter(Value) - Method in interface nxopen.annotations.CircularTargetData
-
Sets the diameter
License requirements: None.
- setDiameter(Value) - Method in interface nxopen.annotations.ICircularTarget
-
Sets the target diameter.
- setDiameter(double) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setDiameter(double) - Method in interface nxopen.cam.HoleBossSet
-
License requirements: cam_base ("CAM BASE")
.
- setDiameter(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDiameter(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDiameter(double) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDiameter(double) - Method in interface nxopen.cam.LaserCutoutDefinition
-
License requirements: cam_base ("CAM BASE")
.
- setDiameter(double) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDiameter(double) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setDiameter(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setDiameter(double) - Method in interface nxopen.cam.WireGuide
-
License requirements: cam_base ("CAM BASE")
.
- setDiameter(double) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the diameter of the die hole.
- setDiameter(double) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the diameter of die holes.
- setDiameter(double) - Method in interface nxopen.die.PadChildBuilder
-
Sets the diameter of the die pad.
- setDiameter(double) - Method in interface nxopen.die.PadParentBuilder
-
Sets the diameter of die pads.
- setDiameter(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDiameter(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDiameter(double) - Method in interface nxopen.die.PressureSystemChildBuilder
-
Sets the diameter of the pressure system.
- setDiameter(double) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the diameter of pressure systems.
- setDiameter(String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets the diameter of the hole.
- setDiameter(String) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
- setDiameter(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDiameter(Expression) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- setDiameter(NXObject, double) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Sets diameter for hole series.
- setDiameterDimensionDimLineAngle(double) - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDiameterDimensionLineAngle(double) - Method in interface nxopen.annotations.BaseDiameterDimension
-
Sets a value of diameter dimension line angle
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDiameterForHelix(CylinderMillingBuilder.DiameterForHelixTypes) - Method in interface nxopen.cam.CylinderMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDiameterGeoAxisName(String, String) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the diameter geo axis name, which change the output behavior of length values during turning.
- setDiameterRadiusPlacement(DiameterRadiusSymbolPlacement) - Method in interface nxopen.annotations.RadialStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDiameterRadiusPreferences(DiameterRadiusPreferences) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the diameter and radius preferences
License requirements: None.
- setDiameterRadiusPreferences(UFDrf.DiameterRadiusPreferences) - Method in interface nxopen.uf.UFDrf
-
- setDiameterSymbol(DiameterSymbol) - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Sets the diameter symbol
License requirements: None.
- setDiameterSymbol(String) - Method in interface nxopen.annotations.RadialStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDiameterSymbol(SearchCriteriaDimensionBuilder.DiameterSymbolOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setDiameterSymbolText(String) - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Sets the symbol text for user defined diameter symbol
License requirements: None.
- setDiameterSymbolType(DiameterSymbol) - Method in interface nxopen.annotations.RadialStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setDiameterType(DiameterType) - Method in interface nxopen.cae.connections.IDiameter
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setDiameterValue(double) - Method in interface nxopen.routing.PathStockBuilder
-
- setDiaScaleFactor(double) - Method in interface nxopen.cae.CircularImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDieBaseType(DieBaseBuilder.DieBaseTypeOpt) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDieCenterlineCsys(CartesianCoordinateSystem) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the die centerline csys of the draw die punch casting.
- setDieClearance(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDieClearance(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDieInsertStack(DieCavityAndSlugHoleBuilder.DieInsertStackType) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDieInsertType(DieInsertBuilder.DieInsertTypeItems) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDieInsertType(PiercingInsertBuilder.DieInsertTypeItems) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setDieOffsetValue(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDieOffsetValue(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setDiePenetration(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDiePlateClearance(double) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDiePlateClearance(double) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setDiePlateThree(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDiePlateTwo(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDiePosition(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDieRadius(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
- setDieRadius(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
- setDieRadius(String) - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
- setDieSameOffsetValue(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDieSameOffsetValue(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setDieStandardInsertInstance(TaggedObject) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: None.
- setDieToolId(int) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the die tool id selected
License requirements: nx_sheet_metal ("NX Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setDieToolIdName(String) - Method in interface nxopen.features.sheetmetal.BendOptions
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setDifferentColorsAsBoundaryFacesOption(boolean) - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
License requirements: None.
- setDifferentPenetration(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDigital(boolean) - Method in interface nxopen.motion.ControlInputPortBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDimAppendedTextSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the dimension/appended text space factor
License requirements: None.
- setDimAppendedTextSpaceFactor(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setDimArrowDisplay(ArrowDisplay) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDimDimLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the dimension/dimension line space factor
License requirements: None.
- setDimDimLineSpaceFactor(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setDimensionalConstraint(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setDimensionalityAsString(String) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setDimensionAngularFormat(AngularDimensionFormat) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionArrowheadType(ArrowheadType) - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Sets the dimension arrowhead type when no space for normal arrowheads
License requirements: None.
- setDimensionCharacterSize(double) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDimensionColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch dimension color
License requirements: None.
- setDimensionColor(NXColor) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDimensionDecimalPlaces(int) - Method in interface nxopen.annotations.AngularTolerance
-
Sets the number of decimal places for dimension
License requirements: None.
- setDimensionDisplayOption(NarrowDisplayOption) - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Sets the dimension display option
License requirements: None.
- setDimensionLabel(SketchPreferences.DimensionLabelType) - Method in interface nxopen.preferences.SessionSketch
-
Sets the dimension label
License requirements: None.
- setDimensionLabel(SketchPreferences.DimensionLabelType) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the dimension label.
- setDimensionLeaderAngle(double) - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Sets the dimension leader angle
License requirements: None.
- setDimensionLeadingZero(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the dimension leading zero display property
License requirements: None.
- setDimensionLinearUnits(DimensionUnit) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionNxTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionOffset(double) - Method in interface nxopen.annotations.DimensionSet
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionOrientationVector(Direction) - Method in interface nxopen.features.LinearDimensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDimensionPreferences(DimensionPreferences) - Method in interface nxopen.annotations.Dimension
-
Sets the dimension preferences
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionPreferences(DimensionPreferences) - Method in interface nxopen.annotations.DimensionData
-
Sets the dimension preferences
License requirements: None.
- setDimensionPreferences(DimensionPreferences) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the global dimension preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionPreferences(UFDrf.DimensionPreferences) - Method in interface nxopen.uf.UFDrf
-
- setDimensionPreferences1(UFDrf.DimensionPreferences1) - Method in interface nxopen.uf.UFDrf
-
- setDimensionRule(String) - Method in interface nxopen.drafting.RulesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setDimensions(Dimension[]) - Method in interface nxopen.annotations.AppendedTextEditorBuilder
-
Sets all the dimensions to the builder
License requirements: None.
- setDimensionSetOffset(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setDimensionStandardTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionText(String[]) - Method in interface nxopen.annotations.Dimension
-
Set the main dimension text.
- setDimensionText(Lettering) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the dimension text
License requirements: None.
- setDimensionTextAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionTextCharSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionTextColor(NXColor) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionTextFont(int) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionTextItalicized(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionTextLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionTextLineWidth(LineWidth) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionTextOffset(double) - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Sets the dimension text offset
License requirements: None.
- setDimensionTextOrientation(NarrowTextOrientation) - Method in interface nxopen.annotations.NarrowDimensionPreferences
-
Sets the dimension text orientation
License requirements: None.
- setDimensionTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionTextSymbolAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionTolerancePlacement(TolerancePlacement) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionType(SearchCriteriaDimensionBuilder.DimensionTypes) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setDimensionType(AeroFlangeBuilder.DimType) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Set the length dimension type of the flange
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setDimensionType(DimpleBuilder.DimensionTypeOptions) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Sets the Offset Dimension
The actual extent distance of the Dimple will be determined by the active dimension option.
- setDimensionType(JogBuilder.DimensionTypeOptions) - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Sets the Offset Dimension
The actual extent distance of the Jog will be determined by the active dimension option.
- setDimensionType(SketchAutoDimensionBuilder.DimType) - Method in interface nxopen.SketchAutoDimensionBuilder
-
License requirements: None.
- setDimensionValue(double) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setDimensionValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimensionValueType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setDimInspectionType(Tag, UFDrf.InspectionType) - Method in interface nxopen.uf.UFDrf
-
- setDimLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDimOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDimReferenceType(Tag, UFDrf.ReferenceSymbolType) - Method in interface nxopen.uf.UFDrf
-
- setDimRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDimSizeCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDimToleranceTextSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the dimension/tolerance text space factor
License requirements: None.
- setDimToleranceTextSpaceFactor(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setDimZeroToleranceDisplayStyle(ZeroToleranceDisplayStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDipole(boolean) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setDirectEngageRetractMode(TurnEngageRetractBuilder.DirectEngageRetractModes) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDirection(Direction) - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setDirection(FeatureControlFrameIndicatorBuilder.FcfIndicatorDirection) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDirection(Direction) - Method in interface nxopen.Axis
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDirection(Vector3d) - Method in interface nxopen.blockstyler.ReverseDirection
-
License requirements: None.
- setDirection(Direction) - Method in interface nxopen.cae.MeshPointProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDirection(boolean) - Method in interface nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDirection(Direction) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setDirection(Direction) - Method in interface nxopen.cae.xyplot.LineStyle3DSetting
-
License requirements: None.
- setDirection(Direction) - Method in interface nxopen.cae.xyplot.PlateStyle3DSetting
-
- setDirection(CamPathDir) - Method in interface nxopen.cam.PathCircularMotion
-
License requirements: cam_base ("CAM BASE")
.
- setDirection(Direction) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setDirection(TurnMoveToPointBuilder.DirectionTypes) - Method in interface nxopen.cam.TurnMoveToPointBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDirection(TurnProbeInspectPointMoveBuilder.DirectionTypes) - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDirection(TurnRoughFinishTestCut.DirectionTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setDirection(Direction) - Method in interface nxopen.diagramming.PortBuilder
-
License requirements: None.
- setDirection(Direction) - Method in interface nxopen.facet.BestFitAlignBuilder
-
Sets the plane or line direction
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDirection(Direction) - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.
- setDirection(Direction) - Method in interface nxopen.facet.ExtrudeProfileBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.
- setDirection(Vector3d) - Method in interface nxopen.features.CylinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDirection(Direction) - Method in interface nxopen.features.DraftBuilder
-
Sets the smart direction for draft
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(Direction) - Method in interface nxopen.features.EmbossJoggle
-
Sets the direction for joggle
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(Direction) - Method in interface nxopen.features.EmbossLimit
-
Sets the direction for translation
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(Direction) - Method in interface nxopen.features.EmbossRegion
-
Sets the default direction
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(Direction) - Method in interface nxopen.features.EmbossSidewall
-
Sets the draw direction for sidewall
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(Direction) - Method in interface nxopen.features.ExtrudeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(IsoparametricCurvesBuilder.DirectionTypes) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(Direction) - Method in interface nxopen.features.MoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(boolean) - Method in interface nxopen.features.OffsetFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(Direction) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(BendBuilder.BendDirectionOptions) - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Sets the Bend Direction
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setDirection(Direction) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDirection(Direction) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setDirection(boolean) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setDirection(Vector3d) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setDirection(BlendSetbackBuilder.Directions) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirection(boolean) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDirection(Direction) - Method in interface nxopen.mechatronics.BreakingConstraintBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setDirection(Direction) - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setDirection(Direction) - Method in interface nxopen.mechatronics.VirtualAxisBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setDirection(Direction) - Method in interface nxopen.motion.BeamForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDirection(Direction) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setDirection(ControlOutputBuilder.DirectionType) - Method in interface nxopen.motion.ControlOutputBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDirection(ScalarForceBuilder.DirectionType) - Method in interface nxopen.motion.ScalarForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDirection(ScalarTorqueBuilder.DirectionType) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDirection(Direction) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setDirection(KinematicAxisBuilder.AxisDirectionType) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setDirectional(boolean) - Method in interface nxopen.cam.CleanupSettings
-
License requirements: cam_base ("CAM BASE")
.
- setDirectionAsString(String) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setDirectionAtPoint(Direction) - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setDirectionAxis(Axis) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDirectionAxisType(DmRotaryFloorFinishBuilder.DirectionType) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDirectionCsys(CoordinateSystem) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDirectionFeatureType(SearchCriteriaFeatureControlFrameBuilder.DirectionFeatureOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setDirectionFlag(DivideCurveBuilder.InputArcLengthDirectionFlag) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setDirectionFlipped(boolean) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirectionLength(double) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDirectionOfAxis(Tag, double[]) - Method in interface nxopen.uf.UFSo
-
- setDirectionOfDirr(Tag, double[]) - Method in interface nxopen.uf.UFSo
-
- setDirectionOfInterface(Direction) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDirectionOption(LaminateDrapingDataBuilder.DrapingDirectionType) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDirectionOption(VelocityImpactDirection.DirectionType) - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDirectionOption(CircularBlendCurveBuilder.CylinderDirectionOption) - Method in interface nxopen.features.CircularBlendCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirectionOption(EmbossJoggle.JoggleDirectionMethod) - Method in interface nxopen.features.EmbossJoggle
-
Sets the emboss joggle direction option
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirectionOption(FitSurfaceBuilder.DirectionType) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setDirectionOption(SubdivisionExtrudeCageBuilder.DirectionType) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setDirectionOption(TrimCurve2Builder.Direction) - Method in interface nxopen.features.TrimCurve2Builder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDirectionOption(CurveAnalysisCombsBuilder.DirectionOptionType) - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
-
- setDirectionOption(CurveAnalysisInflectionsBuilder.DirectionOptionType) - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder
-
- setDirectionOption(CurveAnalysisPeaksBuilder.DirectionOptionType) - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder
-
- setDirectionOption(CurveAnalysisRecord.DirectionOptionType) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setDirectionOption(DieEngTrimAngleCheckBuilder.DirectionOptions) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDirectionOrientation(DatumAxisBuilder.DirectionOrientations) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setDirectionPoint(Point) - Method in interface nxopen.cae.connections.LocationWithDir
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDirectionReversed(boolean) - Method in interface nxopen.facet.CurvatureBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDirectionReversed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDirections(Vector3d, Vector3d) - Method in interface nxopen.CoordinateSystem
-
The orientation of the coordinate system
License requirements: None.
- setDirectionSpecifiedEnum(InspectionConstructedFeatureBuilder.DirectionType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDirectionType(BeamSection.DirectionOption) - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDirectionType(BeamSection.DirectionOption) - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDirectionType(GeometryGroup.DirectionTypes) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setDirectionType(ProbeInspectPointMoveBuilder.Direction) - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDirectionType(ProbeInspectSurfacePointMoveBuilder.Direction) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
License requirements: None.
- setDirectionType(BrokenViewBuilder.TypeDirection) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setDirectionType(JogBuilder.DirectionTypeOptions) - Method in interface nxopen.features.sheetmetal.JogBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setDirectionType(PenetrationRequest.DirectionType) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setDirectionType(PenetrationRequest.DirectionType) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setDirectionType(PenetrationRequest.DirectionType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setDirectionType(HelixPattern.DirectionTypes) - Method in interface nxopen.geometricutilities.HelixPattern
-
License requirements: None.
- setDirectionType(SpiralPattern.OrientType) - Method in interface nxopen.geometricutilities.SpiralPattern
-
License requirements: None.
- setDirectionType(SpeedPositionControlDirectiontype) - Method in interface nxopen.mechatronics.PositionControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setDirectionType(SpeedPositionControlDirectiontype) - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setDirectionVector(Vector3d) - Method in interface nxopen.Axis
-
Sets the direction vector for a non-associative axis.
- setDirectionVector(Direction) - Method in interface nxopen.cae.connections.LocationWithDir
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDirectionVector(Direction) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDirectionVector(Direction) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setDirectionVector(Direction) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDirectionVector1(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDirectionVector2(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDirectionView(View) - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setDirectToggle(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDirectTrimPoint(boolean) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
- setDirVec(Direction) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDirVector(Direction) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setDisable(boolean) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setDisable(boolean) - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setDisable(boolean) - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setDisable(boolean) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setDisabled() - Method in interface nxopen.CustomPopupMenuItem
-
Sets the menu disabled
License requirements: None.
- setDisabled(boolean) - Method in interface nxopen.presslinesimulation.CushionControlBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setDiscipline(String) - Method in interface nxopen.diagramming.ConnectionBuilder
-
License requirements: None.
- setDiscipline(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setDisciplineChangedPlugin(CustomManager.DisciplineChangedPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will use to display a note on the segments selected in the Duct Size Calculator.
- setDisclosurePurpose(String) - Method in interface nxopen.View
-
Sets the Disclosure Purpose.
- setDiscontinuityMethod(Result.DiscontinuityMethod) - Method in interface nxopen.cae.ResultParameters
-
Set discontinuity method
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDispContact(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setDispContactNormal(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setDispCS(CoordinateSystem) - Method in interface nxopen.cae.AssignNodalCSBuilder
-
License requirements: None.
- setDispCSType(AssignNodalCSBuilder.CSType) - Method in interface nxopen.cae.AssignNodalCSBuilder
-
License requirements: None.
- setDispCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeCreateBuilder
-
License requirements: None.
- setDispCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDisplacement(double) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDisplacementStepSize(TBSShapeOptimizationParameters.DisplacementStepsize) - Method in interface nxopen.cae.optimization.TBSShapeOptimizationParameters
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setDisplay(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplay(BasePart, boolean, boolean) - Method in interface nxopen.PartCollection
-
Sets the active display part.
- setDisplay(int) - Method in interface nxopen.uf.UFDisp
-
- setDisplayAlertsOnInformation(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the option "Display Alerts on Information" gives choice, whether the
user wants the Diagnostic alerts appear when
features contain information messages during feature
creation, edit, and update.
- setDisplayAlertsOnWarnings(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the option "Display Alerts on Warnings" gives choice, whether the
user wants the Diagnostic alerts appear when
features contain warnings during feature
creation, edit, and update.
- setDisplayAllTextInUpperCase(boolean) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayAnchors(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setDisplayAppearance(ViewVisualizationVisual.DisplayAppearanceOptions) - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Sets the rendering style and the edge display options of the view.
- setDisplayArrowOnParentView(ViewProjectedViewSettingsBuilder.DisplayArrowOnParentViewType) - Method in interface nxopen.drawings.ViewProjectedViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayAsPmi(boolean) - Method in interface nxopen.features.EditDimensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDisplayAsSingleSided(boolean) - Method in interface nxopen.annotations.SingleSidedDisplayBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayAutoDimensions(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not to display auto dimensions
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDisplayBanner(boolean) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setDisplayBitmapLabel(boolean) - Method in interface nxopen.blockstyler.Label
-
License requirements: None.
- setDisplayBoltHoleCenterline(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayBoltHoleCenterline(boolean) - Method in interface nxopen.cae.MeshDisplaySettings2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayBorders(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayBorders(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flag indicating whether to display borders around drafting views, when selected
License requirements: None.
- setDisplayByTime(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setDisplayCenterOfRotation(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Sets whether a graphic representing the center of rotation is displayed
during interactive view rotation.
- setDisplayCgOption(boolean) - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDisplayChangeSymbol(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setDisplayChangeSymbol(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayComponent(Component) - Method in interface nxopen.positioning.Network
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDisplayConnectedPorts(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath
-
Display connected ports in the model
License requirements: routing_base ("Routing Basic")
.
- setDisplayConstraints(boolean) - Method in interface nxopen.assemblies.PositioningGroup
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDisplayConstraints(boolean) - Method in interface nxopen.assemblies.PositioningTask
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDisplayConstraints(boolean) - Method in interface nxopen.positioning.ComponentPositioner
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDisplayConstraintSymbols(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not to display constraint symbols
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDisplayConstructionGeometry(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDisplayContinuationNote(TableSectionStyleBuilder.DisplayContinuationNoteType) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDisplayContouring(boolean) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
License requirements: None.
- setDisplayCrosshatch(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setDisplayCrosshatch(boolean) - Method in interface nxopen.annotations.RegionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setDisplayCsys(boolean) - Method in interface nxopen.weld.JointmarkBuilder
-
Indicates whether the csys should be displayed on creation
License requirements: ugweld ("UG WELD")
.
- setDisplayCurveCurvatureOutside(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets the curve curvature display style to show it on the inside/outside of the curve
License requirements: None.
- setDisplayCutRegionsFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDisplayCuttingPlaneSymbol(boolean) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
License requirements: geometric_tol ("GDT")
.
- SetDisplayData() - Constructor for class nxopen.PartCollection.SetDisplayData
-
- setDisplayDeletedGridPoints(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDisplayDialogsInPlayback(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the display dialogs in playback flag
License requirements: None.
- setDisplayDigits(int) - Method in interface nxopen.ame.PageNamingBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDisplayDimensionLine(OrdinateLineArrowDisplayOption) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDisplayDOFArrows(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not the degree of freedom arrows are displayed.
- setDisplayedPart(BasePart) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Set displayed part
License requirements: None.
- setDisplayEffectivityFilterNodesInPartNavigator(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: nx_pmi_effectivity ("NX PMI EFFECTIVITY")
.
- setDisplayExcludedDesignElements(boolean) - Method in interface nxopen.assemblies.Subset
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDisplayFilter(ElectricalFormat.Type, ElectricalNavigatorFilter) - Method in interface nxopen.routing.electrical.ElectricalNavigatorFilterCollection
-
- setDisplayFitParentheses(boolean) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the flag indicating whether to display parentheses for fit tolerance.
- setDisplayFitSeparator(boolean) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the flag indicating whether to display separator for fit tolerance of assembly dimensions.
- setDisplayFlowParamsEnabled(boolean) - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setDisplayForce(boolean) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
Display Force
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setDisplayFormat(ElectricalFormat.Type, ElectricalFormat) - Method in interface nxopen.routing.electrical.ElectricalFormatCollection
-
Set the
ElectricalFormat
object as displayed
format for the given navigator type.
- setDisplayGouges(boolean) - Method in interface nxopen.cam.CutDepthChecker
-
License requirements: cam_base ("CAM BASE")
.
- setDisplayGrid(int, int) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the number of sample points for BC display in first and second parametric direction
for a face.
- setDisplayGridToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the display grid status of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setDisplayHoles(boolean) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the display holes switch of the draw die punch casting, if true holes will be created in the punch, if false holes will not be created.
- setDisplayHoles(boolean) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the display holes switch of the die hole, if true the hole will be built into the model, if false it will not.
- setDisplayHoles(boolean) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the display holes switch of die holes, if true the holes will be built into the model, if false they will not.
- setDisplayHoles(boolean) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the display holes option of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setDisplayHoles(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder
-
Sets the display holes option of pierce holes
License requirements: ug_die_design ("Die Design")
.
- setDisplayHoles(boolean) - Method in interface nxopen.die.RotorBuilder
-
Sets the display holes of the rotor casting.
- setDisplayHoles(boolean) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the display holes of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- setDisplayIcon(String) - Method in interface nxopen.blockstyler.Node
-
License requirements: None.
- setDisplayId(GeneralDisplayIdOption) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the display identifier option for a member view.
- setDisplayId(GeneralDisplayIdOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayId(GeneralDisplayIdOption) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the display identifier option for a member view.
- setDisplayInformation(boolean) - Method in interface nxopen.STLImporter
-
Sets the Display Information flag.
- setDisplayInterferenceResult(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDisplayInternalEdges(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayInternalEdges(boolean) - Method in interface nxopen.cae.MeshDisplaySettings3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayIntersectionCurves(boolean) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDisplayJisrotationLetter(boolean) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setDisplayLabel(boolean) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setDisplayLabel(ViewProjectedArrowSettingsBuilder.DispalyLabelType) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayLeadingDimensionZeros(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDisplayLeadingToleranceZeros(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDisplayLegacyFeatureName(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setDisplayLettersOnBends(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayLineBetweenArrows(boolean) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the flag indicating whether to display line between arrows
License requirements: None.
- setDisplayMagnitudeProperty(String) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the neutral name of the property that will control the display
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayMarkerOfPoint(Tag, UFDisp.PolyMarker) - Method in interface nxopen.uf.UFSo
-
- setDisplayMethod(HighlightLinesAnalysisBuilder.DisplayMethods) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
- setDisplayMode(SimBCDisplay.Mode) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the BC display mode
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayMode(DistanceAnalysisBuilder.DisplayModes) - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
License requirements: None.
- setDisplayMode(RadiusAnalysisBuilder.DisplayModes) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
License requirements: None.
- setDisplayMode(SlopeAnalysisBuilder.DisplayModes) - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
License requirements: None.
- setDisplayMode(SubdivisionModelingPreferences.DisplayModes) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDisplayModes(Tag, String, int, int, int, int, int, int, double) - Method in interface nxopen.uf.UFPlist
-
- setDisplayMoment(boolean) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
Display Moment
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setDisplayName(boolean) - Method in interface nxopen.cae.responsesimulation.RSDisplayObject
-
Sets the true/false flag based on whether the name of the BC is
displayed in the graphics window
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDisplayName(String) - Method in interface nxopen.cam.CAMAttribute
-
License requirements: cam_base ("CAM BASE")
.
- setDisplayName(String) - Method in interface nxopen.report.BaseArgument
-
License requirements: None.
- setDisplayName(String) - Method in interface nxopen.report.CommandBuilder
-
License requirements: None.
- setDisplayName(String) - Method in interface nxopen.report.IUserItem
-
Sets the display name.
- setDisplayNameStyle(OrdinateOriginDisplayOption) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDisplayObjectColor(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not sketch objects should be displayed in their true color
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDisplayObjectColor(boolean) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the setting that controls whether or not objects are displayed in their actual color in sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDisplayObjectName(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not objects are displayed with their names in sketch.
- setDisplayObjectName(boolean) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the setting that controls whether or not objects are displayed with their names in sketch.
- setDisplayOnSegments(boolean) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setDisplayOption(DisplaySolidBuilder.DisplayOptionTypes) - Method in interface nxopen.features.shipdesign.DisplaySolidBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setDisplayParenthesesOnReferenceDimensions(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not to display parentheses on reference dimensions
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDisplayParenthesesOnReferenceDimensions(boolean) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the setting that controls whether or not parentheses are displayed on reference dimensions.
- setDisplayPart(Tag) - Method in interface nxopen.uf.UFPart
-
- setDisplayPartBodyName(boolean) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayPartImport(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setDisplayPartOption(DisplayPartOption) - Method in interface nxopen.FileNew
-
License requirements: None.
- setDisplayPartOption(DisplayPartOption) - Method in interface nxopen.pid.FileNewApplicationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setDisplayPartSelect(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setDisplayPmiAssociatedComponentsLoadedForReference(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: nx_pmi_effectivity ("NX PMI EFFECTIVITY")
.
- setDisplayPmiEffectivityMethod(DisplayPmiEffectivityMethod) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: nx_pmi_effectivity ("NX PMI EFFECTIVITY")
.
- setDisplayPmiEffectivityReferenceMethod(DisplayPmiEffectivityMethod) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: nx_pmi_effectivity ("NX PMI EFFECTIVITY")
.
- setDisplayPmiModelViewDisclosurePurpose(String) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the Model View Disclosure Purpose
License requirements: None.
- setDisplayPmiQueryDialogFromMb3(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the PMI query dialog visibility from mb3 option
License requirements: None.
- setDisplayPmiUserDefinedModelViewDisclosure(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the User Defined Model View Disclosure
License requirements: None.
- setDisplayPortLength(double) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setDisplayPorts(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath
-
Display ports in the model?
- setDisplayRcps(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setDisplayReferenceGeometry(boolean) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
License requirements: None.
- setDisplayReferenceGeometry(boolean) - Method in interface nxopen.features.WaveSketchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDisplayReferenceGeometry(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not the reference geometry are displayed on inactive sketches.
- setDisplayReferenceGeometry(boolean) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the setting that controls whether or not the reference geometry are displayed on inactive sketches
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDisplayRegion(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setDisplayRegionLabel(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setDisplayRegionLabel(boolean) - Method in interface nxopen.drawings.AutomationTemplateRegionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayResolution(DisplayPropertiesBuilder.DispResolutionEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDisplayResourceBarOption(SessionUserInterfaceUI.DisplayResourceBar) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the display resource bar option
License requirements: None.
- setDisplayRotatedItems(boolean) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the display rotated items setting of the flange task.
- setDisplayRotationLetter(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayScale(double) - Method in interface nxopen.features.WaveDatumBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDisplayScale(double) - Method in interface nxopen.motion.CurveContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDisplayScale(double) - Method in interface nxopen.motion.JointDefine
-
Sets the display scale
License requirements: mechanisms ("MECHANISMS")
.
- setDisplayScale(double) - Method in interface nxopen.motion.MarkerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDisplayScale(double) - Method in interface nxopen.motion.MotionBuilder
-
Sets the icon display scale
License requirements: mechanisms ("MECHANISMS")
.
- setDisplayScale(double) - Method in interface nxopen.motion.MotionObject
-
Sets the display scale factor
License requirements: mechanisms ("MECHANISMS")
.
- setDisplayScale(double) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setDisplayScaleFactor(double) - Method in interface nxopen.features.DatumCsysBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDisplaySection(DisplaySectionType) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySection(DisplaySectionType) - Method in interface nxopen.cae.MeshDisplaySettings1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySectionEndRelease(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySectionEndRelease(boolean) - Method in interface nxopen.cae.MeshDisplaySettings1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySectioningToggle(boolean) - Method in interface nxopen.ModelingView
-
License requirements: None.
- setDisplaySectionLine(boolean) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets the status of display section line.
- setDisplaySectionLine(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplaySectionMappingWarning(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the display section mapping warning flag.
- setDisplaySectionOrientation(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySectionOrientation(boolean) - Method in interface nxopen.cae.MeshDisplaySettings1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySectionOrientationVector(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySectionOrientationVector(boolean) - Method in interface nxopen.cae.MeshDisplaySettings1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySegmentConstraints(RoutingPath.DisplayObject) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setDisplaySelectedObjects(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setDisplaySettingsData(DuplicateElementsCheckBuilder.DisplaySettings) - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySettingsData(DuplicateNodesCheckBuilder.DisplaySettings) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayShadedEdges(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayShadedEdges(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayShadedEdges(boolean) - Method in interface nxopen.cae.MeshDisplaySettings2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayShadedEdges(boolean) - Method in interface nxopen.cae.MeshDisplaySettings3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplaySheetSizeInBorder(boolean) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setDisplaySheetSizeInBorder(boolean) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayState(int) - Method in interface nxopen.uf.UFDraw
-
- setDisplayStationary(SimulationOptionsBuilder.Stationary) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.CastReliefParentBuilder
-
Sets the display status of cast relief, if true input data to the cast relief will be displayed, if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.ConnectProfileParentBuilder
-
Sets the display status of die pierce holes
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.DeckParentBuilder
-
Sets the display status of deck, if true input data to the deck will be displayed, if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the display status of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Sets the display status of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Sets the display status of the handling core, if true input data to the handling core will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Sets the display status of handling cores, if true input data to the handling cores will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the display status of the die hole, if true input data to the hole will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the display status of die holes, if true input data to the holes will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the display status of the keyway, if true input data to the keyway will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the display status of keyways, if true input data to the keyways will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.PadChildBuilder
-
Sets the display status of the die pad, if true input data to the pad will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.PadParentBuilder
-
Sets the display status of die pads, if true input data to the pads will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the display status of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.PierceHoleParentBuilder
-
Sets the display status of pierce holes
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.PointChildBuilder
-
Sets the display status of the point, if true input data to the point will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.PointParentBuilder
-
Sets the display status of points, if true input data to the points will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.PressureSystemChildBuilder
-
Sets the display status of the pressure system, if true input data to the pressure system will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the display status of pressure systems, if true input data to the pressure systems will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.RibChildBuilder
-
Sets the display status of the die rib, if true input data to the rib will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.RibParentBuilder
-
Sets the display status of die ribs, if true input data to the ribs will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.RotorSectionBuilder
-
Sets the display status of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Sets the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Sets the display status of die sisegs
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.ThroatChildBuilder
-
Sets the display status of the throat section, if true input data to the throat section will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.ThroatParentBuilder
-
Sets the display status of the throat sections, if true input data to the throat sections will be displayed,
if false the input data will not be displayed.
- setDisplayStatus(boolean) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Sets the display status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- setDisplayStatus(boolean) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Sets the display status of wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- setDisplayStyle(OffsetCenterPointBuilder.Display) - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayStyle(PostAnnotation.Style) - Method in interface nxopen.cae.PostAnnotation
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setDisplayStyle(GroupLabel.DisplayStyleOption) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setDisplayStyleForGroupLabel(GroupLabel, GroupLabel.DisplayStyleOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setDisplayStyleOfRecord(int, int) - Method in interface nxopen.cae.xyplot.Graph
-
Sets the display style index for a plotted record.
- setDisplaySuppressedConstraints(boolean) - Method in interface nxopen.assemblies.PositioningGroup
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDisplaySuppressedConstraints(boolean) - Method in interface nxopen.assemblies.PositioningTask
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDisplaySuppressedConstraints(boolean) - Method in interface nxopen.positioning.ComponentPositioner
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setDisplayTechnique(ModelingViewHighQualityImage.DisplayTechniqueType) - Method in interface nxopen.ModelingViewHighQualityImage
-
Sets the display technique to use for the generation of the High Quality Image.
- setDisplayTemplatePart(boolean) - Method in interface nxopen.drawings.AutomationTemplateRegionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDisplayTemporaryPoint(boolean) - Method in interface nxopen.blockstyler.SpecifyLocation
-
License requirements: None.
- setDisplayText(String) - Method in interface nxopen.blockstyler.Node
-
License requirements: None.
- setDisplayText(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults0d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayText(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayText(boolean) - Method in interface nxopen.cae.MeshDisplaySettings0d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayText(boolean) - Method in interface nxopen.cae.MeshDisplaySettings1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayThickShell(boolean) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayThickShell(boolean) - Method in interface nxopen.cae.MeshDisplaySettings2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayTrailingZeros(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the flag indicating whether to display trailing zeros on dimension values
License requirements: None.
- setDisplayTrailingZeros(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDisplayTransform(InspectionMeasDataBuilder.DisplayTransformTypes) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDisplayTurningIpw(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setDisplayType(ReverseShellElementNormalBuilder.DisplayTypeValue) - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDisplayType(FaceCurvatureAnalysisBuilder.DisplayTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setDisplayUniqueInputsToMap(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDisplayUpdateReport(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the display update report option
License requirements: None.
- setDisplayValue(String) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDisplayValueType(PostAnnotation.ValueType) - Method in interface nxopen.cae.PostAnnotation
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setDisplayVertices(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not to display sketch vertices.
- setDisplayVertices(boolean) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the setting that controls whether or not vertices are displayed in an active sketch.
- setDisplayZeroAtBaseline(boolean) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the display zero at baseline flag.
- setDisplayZeroAtBaseline(boolean) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDisplCurveType(JointDefine.ScrewJointDisplCurveType) - Method in interface nxopen.motion.JointDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setDisposition(CompanionResultBuilder.CompanionResultDisposition) - Method in interface nxopen.cae.CompanionResultBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDispParms(int) - Method in interface nxopen.uf.UFDrf
-
- setDispToolEnd(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setDistance(double) - Method in interface nxopen.annotations.HatchBuilder
-
- setDistance(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDistance(double) - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDistance(double) - Method in interface nxopen.assemblies.ProximitySearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDistance(double) - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setDistance(double) - Method in interface nxopen.cam.AlongToolAxisMoveBuilder
-
License requirements: None.
- setDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.CycleTipRelease
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.InPathEventDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.MinCutDepth
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.MinCutLength
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
License requirements: None.
- setDistance(double) - Method in interface nxopen.cam.PitchSetting
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.ReliefCut
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.ReliefPlunge
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.StopPosition
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.TurnOverlap
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(double) - Method in interface nxopen.cam.VectorDistanceMoveBuilder
-
License requirements: None.
- setDistance(double) - Method in interface nxopen.cam.VerticalPosition
-
License requirements: cam_base ("CAM BASE")
.
- setDistance(String) - Method in interface nxopen.features.EmbossLimit
-
The default distance expression formula string for offset or translation
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistance(String) - Method in interface nxopen.features.EmbossTarget
-
The distance expression formula string for offset or translation
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceAlignmentVector(Vector3d) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Set distance alignment vector
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setDistanceAngleDivision(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDistanceAngleDivision(int) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDistanceBetweenAnnotations(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setDistanceBetweenPointsMeasurePoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDistanceBetweenPointsOriginPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDistanceBetweenPointsVector(Direction) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDistanceBetweenSymbolAndDimensionText(double) - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Sets the distance between diameter/radius symbol and dimension text
License requirements: None.
- setDistanceCopyOption(ElementRotateBuilder.DistanceType) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDistanceEnum(CorrelFineTuneAlignmentBuilder.DistanceVector) - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setDistanceFromBoundary(double) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
License requirements: cam_base ("CAM BASE")
.
- setDistanceFromEnd(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setDistanceFromEnds(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDistanceFromInnerBorder(double) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setDistanceFromInnerBorder(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDistanceFromStart(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setDistanceFromViewPlane(ViewCopyTo3dBuilder.DistanceFromViewPlaneOption) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setDistanceLimit(double) - Method in interface nxopen.cam.ToolPathDivideBuilder
-
License requirements: None.
- setDistanceLock(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setDistanceMeausreBodyOnlyFilterStatus(boolean) - Method in interface nxopen.motion.PackagingCollection
-
Sets distance measure body only status
License requirements: mechanisms ("MECHANISMS")
.
- setDistanceOption(ElementExtrudeBuilder.DistanceType) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDistanceOption(ElementTranslateBuilder.DistanceType) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDistanceOption(NodeRotateBuilder.DistanceType) - Method in interface nxopen.cae.NodeRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDistanceOption(NodeTranslateBuilder.DistanceType) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDistanceThreshold(double) - Method in interface nxopen.features.IsoclineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setDistanceThreshold(double) - Method in interface nxopen.features.OptimizeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceThreshold(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
THE distance threshold
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setDistanceToEdgeMidpoint(double) - Method in interface nxopen.tooling.WireHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDistanceTol(double) - Method in interface nxopen.features.SphericalCornerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.annotations.BoundaryBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDistanceTolerance(double) - Method in interface nxopen.cae.QueryCurveUsageOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setDistanceTolerance(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDistanceTolerance(double) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDistanceTolerance(double) - Method in interface nxopen.cam.Topology
-
License requirements: cam_base ("CAM BASE")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.AddSurfBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.CastReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.ClampingSlotBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.ClearanceBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.CompensateRoughDataBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.DieShoeBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the distance tolerance of the draw die punch casting.
- setDistanceTolerance(double) - Method in interface nxopen.die.FillAreaBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.FillBuilder
-
Sets the distance tolerance of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the distance tolerance of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the distance tolerance of the form task.
- setDistanceTolerance(double) - Method in interface nxopen.die.HandlingCoreBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.KeywayBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.MachineReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the distance tolerance.
- setDistanceTolerance(double) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the distance tolerance of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.RotorBuilder
-
Sets the distance tolerance of the rotor casting.
- setDistanceTolerance(double) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the distance tolerance of the diesteelinsert casting
License requirements: ug_die_design ("Die Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDistanceTolerance(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the distance tolerance of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDistanceTolerance(double) - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
License requirements: None.
- setDistanceTolerance(double) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDistanceTolerance(double) - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
License requirements: None.
- setDistanceTolerance(double) - Method in interface nxopen.facet.MergeFacetBodyBuilder
-
License requirements: None.
- setDistanceTolerance(double) - Method in interface nxopen.facet.SewFacetBodyBuilder
-
License requirements: None.
- setDistanceTolerance(double) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.BlendCornerBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.CircularBlendCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.CurveFinderBuilder
-
Set the distance Tolerance for loop Recognization
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.CurveLengthBuilder
-
Sets the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.CurveOnSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.DraftBuilder
-
Sets the distance tolerance in [in/mm]
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.ExtendSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.ExtrudeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.FreeTransformerBuilder
-
License requirements: None.
- setDistanceTolerance(double) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.HelixBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.JoinCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.LawCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.LawExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.LocalScaleCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.MeshTransformerBuilder
-
License requirements: None.
- setDistanceTolerance(double) - Method in interface nxopen.features.MoveCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.OffsetEmbossBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.OptimizeFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.PatchOpeningsBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.ResizeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.RibbonBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.BracketBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.RoomBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.SweepAlongGuideBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.SweptVolumeBuilder
-
License requirements: None.
- setDistanceTolerance(double) - Method in interface nxopen.features.TrimAndExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.VariableOffsetBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.VarsweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDistanceTolerance(double) - Method in interface nxopen.features.WrapBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationChecking
-
License requirements: None.
- setDistanceTolerance(double) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setDistanceTolerance(double) - Method in interface nxopen.Section
-
License requirements: gateway ("UG GATEWAY")
.
- setDistanceTolerance(double) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setDistanceTolerance(double) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.SketchEvaluator
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceTolerance(double) - Method in interface nxopen.SketchIntersectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setDistanceTolerance(double) - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setDistanceTolerance(double) - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- setDistanceTolerance(double) - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- setDistanceTolerance(double) - Method in interface nxopen.uf.UFModeling
-
- setDistanceTolerance(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDistanceTolerance(double) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDistanceTolerance(double) - Method in interface nxopen.weld.SurfaceWeldBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setDistanceTolerance(double) - Method in interface nxopen.weld.WeldBeadBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDistanceTolerance(double) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDistanceTolerance(double) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDistanceTolerance(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the distance tolerance for the weld point
License requirements: ugweld ("UG WELD")
.
- setDistanceToleranceData(double) - Method in interface nxopen.preferences.PartModeling
-
Sets the modeling distance tolerance data.
- setDistanceType(DurSpecialistLoadLengthBuilder.Definition) - Method in interface nxopen.cae.DurSpecialistLoadLengthBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setDistanceType(BoundaryTurnMemberOffset.DistanceTypeMode) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setDistanceType(ExtensionBuilder.Distance) - Method in interface nxopen.features.ExtensionBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setDistanceUnit(ReliefCut.DistanceUnits) - Method in interface nxopen.cam.ReliefCut
-
License requirements: cam_base ("CAM BASE")
.
- setDistanceValue(double) - Method in interface nxopen.features.ResizeChamferCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistanceVector(Direction) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDistanceX(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDistanceY(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setDisToolEndProj(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setDistortionMap(FlatteningBuilder.DistortionMapType) - Method in interface nxopen.FlatteningBuilder
-
- setDistortionMapOptions(FlatteningAndFormingBuilder.DistortionMap) - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDistortionMapOptions(FlatteningAndFormingBuilderEx.DistortionMap) - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setDistributedContact(boolean) - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setDistributedContact(boolean) - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDistribution(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setDistTol(double) - Method in interface nxopen.features.WrapGeometryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDistTolerance(double) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setDistValueDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the distributed value of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDividePlane(Plane) - Method in interface nxopen.cam.SplitSubopCommand
-
License requirements: None.
- setDivideSurface(boolean) - Method in interface nxopen.features.SnipSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setDivideType(ToolPathDivideBuilder.PathDivideType) - Method in interface nxopen.cam.ToolPathDivideBuilder
-
License requirements: None.
- setDivision(String) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
-
License requirements: None.
- setDivisions(int) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setDivisions(int) - Method in interface nxopen.features.MoveObjectBuilder
-
License requirements: None.
- setDmAmRegionCon(boolean) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: None.
- setDmBndCutZigDir(double[]) - Method in interface nxopen.cam.DmBndBuilder
-
Set boundary Zig Dir
License requirements: None.
- setDmBndIntolOuttol(double[]) - Method in interface nxopen.cam.DmBndBuilder
-
Set boundary intol outtol
License requirements: None.
- setDmBndStock(double) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setDmCmEndCutDisType(DmCmBuilder.ExtDisType) - Method in interface nxopen.cam.DmCmBuilder
-
- setDmCmEndCutExtend(boolean) - Method in interface nxopen.cam.DmCmBuilder
-
- setDmCmEndCutRadio(DmCmBuilder.DmCmCutPointType) - Method in interface nxopen.cam.DmCmBuilder
-
License requirements: None.
- setDmCmEndCutToolAxisGuideVector(DmCmBuilder.ToolAxisGuideVectorType) - Method in interface nxopen.cam.DmCmBuilder
-
License requirements: None.
- setDmCmFloorWallStockSame(boolean) - Method in interface nxopen.cam.DmCmBuilder
-
License requirements: None.
- setDmCmStartCutDisType(DmCmBuilder.ExtDisType) - Method in interface nxopen.cam.DmCmBuilder
-
- setDmCmStartCutExtend(boolean) - Method in interface nxopen.cam.DmCmBuilder
-
- setDmCmStartCutRadio(DmCmBuilder.DmCmCutPointType) - Method in interface nxopen.cam.DmCmBuilder
-
License requirements: None.
- setDmCmStartCutToolAxisGuideVector(DmCmBuilder.ToolAxisGuideVectorType) - Method in interface nxopen.cam.DmCmBuilder
-
License requirements: None.
- setDmisFile(String) - Method in interface nxopen.cam.InspectionImportDmisBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDmlExtension(String) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDmlPcs(String) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDmSpiralStepoverMenu(DmSpiralBuilder.DmSpiralStepoverTypes) - Method in interface nxopen.cam.DmSpiralBuilder
-
License requirements: None.
- setDmSurfCutArea(DmRotaryFloorFinishBuilder.DmSurfCutAreaType) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDmSurfCutArea(DmSurfBuilder.DmSurfCutAreaType) - Method in interface nxopen.cam.DmSurfBuilder
-
License requirements: None.
- setDmSurfCutPattern(DmSurfBuilder.DmSurfCutPatternType) - Method in interface nxopen.cam.DmSurfBuilder
-
License requirements: None.
- setDmSurfCutStep(DmRotaryFloorFinishBuilder.DmSurfCutStepTypes) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
License requirements: None.
- setDmSurfCutStep(DmSurfBuilder.DmSurfCutStepType) - Method in interface nxopen.cam.DmSurfBuilder
-
License requirements: None.
- setDmSurfCutStepFirstCut(int) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
License requirements: None.
- setDmSurfCutStepFirstCut(int) - Method in interface nxopen.cam.DmSurfBuilder
-
License requirements: None.
- setDmSurfCutStepSecondCut(int) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
License requirements: None.
- setDmSurfCutStepSecondCut(int) - Method in interface nxopen.cam.DmSurfBuilder
-
License requirements: None.
- setDmSurfCutStepThirdCut(int) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
License requirements: None.
- setDmSurfCutStepThirdCut(int) - Method in interface nxopen.cam.DmSurfBuilder
-
License requirements: None.
- setDmSurfCutTraversal(DmSurfBuilder.DmSurfCutTraversalType) - Method in interface nxopen.cam.DmSurfBuilder
-
License requirements: None.
- setDmSurfGouge(DmRotaryFloorFinishBuilder.GougeActionTypes) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
License requirements: None.
- setDmSurfGouge(DmSurfBuilder.GougeActionType) - Method in interface nxopen.cam.DmSurfBuilder
-
License requirements: None.
- setDmSurfToolPos(DmSurfBuilder.ToolPositionType) - Method in interface nxopen.cam.DmSurfBuilder
-
License requirements: None.
- setDmUserExitCi(String) - Method in interface nxopen.cam.DmUserExitCiBuilder
-
License requirements: None.
- setDmvRotationPlane(Tag, Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- setDoAppendMerge(boolean) - Method in interface nxopen.cae.SolverAppendOption
-
- setDoAutomaticGeomMatch(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDoCoplanarDecimation(boolean) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setDocumentStructure(DocumentStructure.Attribute, DocumentStructure.Attribute, DocumentStructure.Attribute, DocumentStructure.Attribute) - Method in interface nxopen.ame.db.DocumentStructure
-
Set all four attributes of Document Structure order in sequence.
- setDocumentStructure(DocumentStructure.Attribute, DocumentStructure.Attribute, DocumentStructure.Attribute) - Method in interface nxopen.ame.db.DocumentStructure
-
Set any three attributes of Document Structure order in sequence
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setDocumentStructure(DocumentStructure.Attribute, DocumentStructure.Attribute) - Method in interface nxopen.ame.db.DocumentStructure
-
Set any two attributes of Document Structure order in sequence.
- setDocumentStructure(DocumentStructure.Attribute) - Method in interface nxopen.ame.db.DocumentStructure
-
Set any one attribute of Document Structure order.
- setDoDepthPasses(boolean) - Method in interface nxopen.cam.MultiplePassesBuilder
-
License requirements: None.
- setDoExportMeshToSolver(boolean) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setDof(Dof, DofType) - Method in interface nxopen.cae.connections.IDof
-
Set the specified degrees of freedom
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof1(boolean) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof1Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder
-
The set_dof1_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof2(boolean) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof2Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder
-
The set_dof2_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof3(boolean) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof3Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder
-
The set_dof3_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof4(boolean) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof4Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder
-
The set_dof4_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof5(boolean) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof5Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder
-
The set_dof5_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof6(boolean) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDof6Weights(double[]) - Method in interface nxopen.cae.InterpolationEADBuilder
-
The set_dof6_weights operator selects elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDOFColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch degree of freedom arrow color
License requirements: None.
- setDofCombination(DofCombination) - Method in interface nxopen.cae.connections.IDofCombination
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDofCsysMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomCsysMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDOFDisplay(boolean) - Method in interface nxopen.Sketch
-
Sets a flag indicating whether the degree of freedom arrows are currently being
displayed
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDofDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the dof of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDoFitOnHideOrShow(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Sets the option to specify whether a Fit should be done when a Hide or Show is performed.
- setDofs(TBSCheckDOF.DofSettings) - Method in interface nxopen.cae.optimization.TBSCheckDOF
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setDofs(FENode[], boolean[]) - Method in interface nxopen.cae.PreTestDofSet
-
Setting the dofs manually
License requirements: nx_correl_base ("FE Correlation")
.
- setDofs(RigidEADBuilder.Dof[]) - Method in interface nxopen.cae.RigidEADBuilder
-
The get operator for the 6 dofs of the rigid element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDofSet(CaeDOFSet) - Method in interface nxopen.cae.PreTestDofSet
-
Setting the
CaeDOFSet
reference
License requirements: nx_correl_base ("FE Correlation")
Created in NX7.5.0
- setDofSets(CaeDOFSet[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set DOF sets to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setDofSetSelect(CaeDOFSet) - Method in interface nxopen.cae.PreTestDofSetBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setDofsState(RigidEADBuilder.State) - Method in interface nxopen.cae.RigidEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setDoglegAngle(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the dogleg angle
License requirements: None.
- setDoglegAngle(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDoglegCreationOption(OrdinateDoglegCreationOption) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the dogleg creation option
License requirements: None.
- setDoglegCreationOption(OrdinateDoglegCreationOption) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDoglegData(OrdinateDimension.DoglegPreferences) - Method in interface nxopen.annotations.OrdinateDimension
-
Sets the dogleg data for Ordinate Dimension.
- setDoglegDefinition(OrdinateDoglegDefinition) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the dogleg definition
License requirements: None.
- setDoglegEndOffset(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the dogleg end offset
License requirements: None.
- setDoglegEndOffset(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDoglegSetting(OrdinateDoglegDefinition) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDoglegStartOffset(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the dogleg start offset
License requirements: None.
- setDoglegStartOffset(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDomeImage(Image) - Method in interface nxopen.display.Background
-
License requirements: None.
- setDomeImageFilename(String) - Method in interface nxopen.display.Background
-
License requirements: None.
- setDomeOrigin(Point) - Method in interface nxopen.display.Background
-
License requirements: None.
- setDomeSize(double) - Method in interface nxopen.display.Background
-
License requirements: None.
- setDomeType(Background.BackgroundDomeType) - Method in interface nxopen.display.Background
-
License requirements: None.
- setDoorTopLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoorTopRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDoPaste(boolean) - Method in interface nxopen.features.CopyFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDoPaste(boolean) - Method in interface nxopen.features.CutFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDoSharpFeatureEdge(boolean) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setDoSharpFeaturePlaneIntersection(boolean) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setDoSidePasses(boolean) - Method in interface nxopen.cam.MultiplePassesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDotArrowheadDiameter(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the dot arrowhead diameter
License requirements: None.
- setDotArrowheadDiameter(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDoTest(boolean) - Method in interface nxopen.cae.modelcheck.ITestValue
-
License requirements: None.
- setDoTrimWithoutCopy(boolean) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDouble(String, double) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the double value for the given property name.
- setDouble(int, int, double) - Method in interface nxopen.ITableEditorDataProvider
-
Sets double data at a particular location in the table.
- setDouble(int[], int, double) - Method in interface nxopen.ITableEditorDataProvider
-
Sets double data on a range of table cells in a specified column.
- setDouble(String, double) - Method in interface nxopen.PropertyContainer
-
Sets the double value for the given property name.
- setDouble(UFVariant, String, double) - Method in interface nxopen.uf.UFMom
-
- setDouble(UFVariant, String, double) - Method in interface nxopen.uf.UFUde
-
- setDoubleA(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDoubleAngle(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDoubleArray(UFVariant, String, int, double[]) - Method in interface nxopen.uf.UFMom
-
- setDoubleArrayPreference(String, double[]) - Method in interface nxopen.preferences.RoutingUserPreferences
-
Sets the values of the named double array user preference in the current NX session.
- setDoubleArraySize(int) - Method in interface nxopen.motion.LmsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setDoubleB(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDoubleBorder(boolean) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDoubleDefault(double) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDoubleDirVecI(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleDirVecJ(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleDirVecK(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleH(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDoubleLower(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleLowerParamOuterProfile(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleMatrix(String, int, int, double[]) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the double matrix for the given property name.
- setDoubleMatrix(String, int, int, double[]) - Method in interface nxopen.PropertyContainer
-
Sets the double matrix for the given property name.
- setDoubleMax(double) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDoubleMin(double) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDoubleNominal(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleOfScalar(Tag, double) - Method in interface nxopen.uf.UFSo
-
- setDoubleParamExtArea(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleParamExtLength(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleParamOuterProfile(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleParamTolValue(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleParamTolValue1(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoublePassTranslucency(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDoublePreference(String, double) - Method in interface nxopen.preferences.RoutingUserPreferences
-
Sets the value of the named double user preference in the current NX session.
- setDoublePropertyValue(String, double) - Method in interface nxopen.BasePropertyTable
-
Sets the double value of the property
License requirements: None.
- setDoubleR(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDoubles(double[]) - Method in interface nxopen.features.UserDefinedFeatureApplicationField
-
Sets all of the doubles in this field
License requirements: None.
- setDoubles(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Sets all of the doubles stored with this UDO
License requirements: None.
- setDoubles(int, int, double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Replaces the doubles stored with this UDO in the specified range with a new array of doubles
License requirements: None.
- setDoubleSide(boolean) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setDoubleSidedMaximumValue(String) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setDoubleSidedMinimumValue(String) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setDoubleUgAttribute(UFVariant, String, double) - Method in interface nxopen.uf.UFMfm
-
- setDoubleUpper(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleValue(double) - Method in interface nxopen.cam.CAMAttribute
-
Set the feature attribute double value for a double type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.
- setDoubleValue(String, double) - Method in interface nxopen.cam.Cycle
-
Set the double value of the parameter
License requirements: cam_base ("CAM BASE")
.
- setDoubleValue(double) - Method in interface nxopen.cam.UdeParameter
-
License requirements: cam_base ("CAM BASE")
.
- setDoubleValue(double) - Method in interface nxopen.SpreadsheetCellData
-
License requirements: None.
- setDoubleValue(Tag, int, double) - Method in interface nxopen.uf.UFParam
-
- setDoubleValueOfAttribute(UFVariant, String, double) - Method in interface nxopen.uf.UFMfm
-
- setDoubleVector(String, double[]) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the double vector for the given property name.
- setDoubleVector(String, double[]) - Method in interface nxopen.PropertyContainer
-
Sets the double vector for the given property name.
- setDoubleViewScale(double) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDoubleViewVecI(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleViewVecJ(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleViewVecK(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDoubleVla(Tag, int, int, double[]) - Method in interface nxopen.uf.UFParam
-
- setDownDirection(Direction) - Method in interface nxopen.routing.RouteManager
-
License requirements: routing_base ("Routing Basic")
.
- setDownToleranceForLength(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDownToleranceForWidth(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setDpiEnum(StudioImageCaptureBuilder.DPIEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder
-
License requirements: None.
- setDpmcvStepType(DmCurveBuilder.DpmcvStepTypes) - Method in interface nxopen.cam.DmCurveBuilder
-
License requirements: None.
- setDpmProjType(ProjVecCiBuilder.DpmProjTypes) - Method in interface nxopen.cam.ProjVecCiBuilder
-
Set the Project Type
License requirements: None.
- setDraftAllInstances(boolean) - Method in interface nxopen.features.DraftBuilder
-
Sets the option "Draft all instances" [true/false]
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDraftAngle(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setDraftAngle(String) - Method in interface nxopen.geometricutilities.SimpleDraft
-
- setDraftAngleScale(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setDraftBothSides(boolean) - Method in interface nxopen.features.DraftBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDraftCommon(Tag) - Method in interface nxopen.uf.UFDrf
-
- setDraftingMode(EWDraftingBuilder.ModeOption) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setDraftingSketchCircles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDraftingSurfaceFinishStandard(SurfaceFinishStandard) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the drafting surface finish standard
License requirements: None.
- setDraftingSurfaceFinishStandard(SurfaceFinishStandard) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDraftIsoclineOrTruedraft(DraftBuilder.Method) - Method in interface nxopen.features.DraftBuilder
-
Sets the Draft method
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDraftMethod(DraftBodyBuilder.Method) - Method in interface nxopen.features.DraftBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDraftOption(SimpleDraft.SimpleDraftType) - Method in interface nxopen.geometricutilities.MultiDraft
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDraftReferencesMethod(DraftBuilder.DraftReferencesMethods) - Method in interface nxopen.features.DraftBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDraftType(EndCutBuilder.DraftTypes) - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setDraftType(SimpleDraft.SimpleDraftType) - Method in interface nxopen.geometricutilities.SimpleDraft
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDragData(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
License requirements: None.
- setDraggable(boolean) - Method in interface nxopen.shipdesign.NavigatorNode
-
Sets the node draggable attribute.
- setDraggedObject(NXObject) - Method in interface nxopen.linedesigner.FastPlacementUtilityBuilder
-
Dragged object is set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setDragHandlePositionPreference(SessionAssemblies.DragHandlePositionOption) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the drag handle position preference
License requirements: None.
- setDrapingExtension(LaminateDrapingExtension) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDrapingInput(LaminateDrapingData) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDrapingMeshRatio(double) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDrapingPath(LaminateDrapingDataBuilder.DrapingPathType) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDrawBeadCurves(Curve[]) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Sets the draw bead curves.
- setDrawBeadTypeOption(LsdynaGeometryPreparationBuilder.DrawBeadType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDrawBox(boolean) - Method in interface nxopen.cae.PostAnnotation
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setDrawDirection(Direction) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setDrawDirection(int, int, int) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets the unform draw direction.
- setDrawDirection(Direction) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDrawDirection(Direction) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDrawDirection(Direction) - Method in interface nxopen.facet.RemoveUndercutsBuilder
-
License requirements: None.
- setDrawDirection(Direction) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDrawDirection(Direction) - Method in interface nxopen.features.DraftBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDrawing(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
- setDrawingArray(TaggedObject[]) - Method in interface nxopen.IgesCreator
-
Sets the drawings - the list of drawings to translate
License requirements: None.
- setDrawingArray(TaggedObject[]) - Method in interface nxopen.NXTo2dCreator
-
Sets the drawing - sets the list of drawings to translate
License requirements: None.
- setDrawingCgmData(boolean) - Method in interface nxopen.PartSaveOptions
-
Sets the option indicating whether to generate the CGM data and
store it in the QAF when you save the part file
License requirements: None.
- setDrawingDisplay(UFDisp.DrawingDisplayData) - Method in interface nxopen.uf.UFDisp
-
- setDrawingFileNamingRule(String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDrawingFilter(CompDrawingBuilder.DrawingType) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDrawingLayout(boolean) - Method in interface nxopen.DraftingManager
-
Set a drafting layout
License requirements: None.
- setDrawingList(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setDrawingList(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setDrawingName(String) - Method in interface nxopen.features.shipdesign.DrawingPartBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDrawingName(String) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDrawingName(String) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setDrawingPlane(Plane) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setDrawingPlane(Plane) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDrawingPlaneOption(GeneralConicBuilder.DrawingPlaneOptions) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setDrawingPlaneOption(PolylineBuilder.DrawingPlaneOptions) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setDrawingPlaneOption(StudioSplineBuilderEx.DrawingPlaneOptions) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDrawingReferencePoint(Point3d) - Method in interface nxopen.drawings.DraftingView
-
Sets the view origin at the provided location.
- setDrawingRefPt(Tag, Tag, double[]) - Method in interface nxopen.uf.UFDraw
-
- setDrawingSheet(NXObject) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setDrawingSheet(DrawingSheet) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setDrawingSheet(DrawingSheetBuilder) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setDrawingSheetColors(Tag, UFCgm.CustomColors) - Method in interface nxopen.uf.UFPlot
-
- setDrawingSheetName(String) - Method in interface nxopen.tooling.DrawingSheetNameBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDrawingSheetNamingRule(String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDrawingSheetWidths(Tag, UFCgm.CustomWidths) - Method in interface nxopen.uf.UFPlot
-
- setDrawingSizeEnum(StudioImageCaptureBuilder.DrawingSizeEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder
-
License requirements: None.
- setDrawingStyle(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setDrawingSuffixName(String) - Method in interface nxopen.features.shipdesign.PinJigBuilder
-
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setDrawingType(EWDraftingBuilder.DrawingOption) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setDrawLineBetweenPoints(boolean) - Method in interface nxopen.features.WavePointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setDrawOption(DraftAnalysisBuilder.DrawDirection) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setDrawOrientation(Matrix3x3) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setDrawOrigin(Point3d) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setDrawText(boolean) - Method in interface nxopen.cae.xyplot.VectorStyle2DSetting
-
License requirements: None.
- setDrawTypeOption(LsdynaGeometryPreparationBuilder.DrawType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDrawVector(Direction) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setDrawVector(Direction) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setDrawVentHoles(boolean) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setDrawX(boolean) - Method in interface nxopen.annotations.DatumData
-
Sets the flag indicating whether to draw X, where the leader terminates
License requirements: None.
- setDrawX(boolean) - Method in interface nxopen.annotations.DatumTargetBuilder
-
- setDrf(Tag, UFGdt.DrfData) - Method in interface nxopen.uf.UFGdt
-
- setDrfTransform(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setDrillingLocation(CenterlineDrillTurningBuilder.DrillingLocationTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDrillSize(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDrillSizeEndChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDrillSizeFitOption(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDrillSizeStandard(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDrillSizeStartChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setDriveColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setDriveDirection(UFVariant, double[]) - Method in interface nxopen.uf.UFDrpos
-
- setDriveGeometryType(TeachmodeProfileMoveBuilder.DriveGeometryTypes) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDriveMethod(SurfaceContourBuilder.DriveMethodTypes) - Method in interface nxopen.cam.SurfaceContourBuilder
-
Set drive method
License requirements: cam_base ("CAM BASE")
.
- setDrivePoint(String) - Method in interface nxopen.cam.ChamferMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDrivePoint(int) - Method in interface nxopen.cam.PlanarMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDrivePointSpecified(boolean) - Method in interface nxopen.cam.PlanarMillingBuilder
-
The drive point specified flag
License requirements: None.
- setDriver(SimDebugBuilder.DriverType) - Method in interface nxopen.sim.SimDebugBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setDriverGraph(TireEnvelopeBuilder.DriverGraphOption) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDriverJoints(NXObject, NXObject) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Set the driver steering joint and jounce joint.
- setDriverSideStandard(MirrorCertificationBuilder.DriverSideStandardsType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDriveStock(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setDriveStock(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setDriveVector(Direction) - Method in interface nxopen.tooling.SpindleSliderBuilder
-
License requirements: nx_dievalidation ("DIE VALIDATION")
.
- setDrivingMethod(DrivingValueBuilder.DrivingValueMethod) - Method in interface nxopen.annotations.DrivingValueBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setDrivingPostureCheck(boolean) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setDropFace(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setDropObject(NXObject) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setDropThruDiameter(double) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the drop thru diameter of the die hole.
- setDropThruDiameter(double) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the drop thru diameter of die holes.
- setDryrun(boolean) - Method in interface nxopen.uf.UFClone
-
- setDualDimensionCenterDimensionLine(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
License requirements: None.
- setDualDimensionCenterDimensionLine(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDualDimensionDecimalPlaces(int) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the number of decimal places for dual dimension
License requirements: None.
- setDualDimensionFormat(DualDimensionPlacement) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDualDimensionFractionDenominator(FractionDenominatorFormat) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the dual dimension and tolerance fraction denominator
License requirements: None.
- setDualDimensionFractionDenominator(FractionDenominatorFormat) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDualDimensionPlacement(DualDimensionPlacement) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the dual dimension placement relative to the primary dimension
License requirements: None.
- setDualDimensionTextFormat(DimensionTextFormat) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the dual dimension text format
License requirements: None.
- setDualDimensionUnit(DimensionUnit) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the dual dimension unit
License requirements: None.
- setDualDimensionUnits(DimensionUnit) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDualDimensionValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDualFractionType(DimensionTextFormat) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDualToleranceDecimalPlaces(int) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the number of decimal places for dual tolerance
License requirements: None.
- setDualToleranceValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setDuctShape(DuctSizeCalculatorBuilder.DuctShapeType) - Method in interface nxopen.routing.DuctSizeCalculatorBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setDuctSizeCalculatorCreateStockPlugin(CustomManager.DuctSizeCalculatorCreateStockPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will use to create stock for the Duct Size Calculator command.
- setDuctSizeCalculatorDisplayNotePlugin(CustomManager.DuctSizeCalculatorDisplayNotePlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will use to display a note on the segments selected in the Duct Size Calculator.
- setDueDate(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setDueDate(String) - Method in interface nxopen.features.shipdesign.PenetrationReviewRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setDueDate(String) - Method in interface nxopen.issue.IssueContent
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setDueDate(String) - Method in interface nxopen.issue.IssueContentBuilder
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setDummyScale(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setDump(SimDebugBuilder.DumpType) - Method in interface nxopen.sim.SimDebugBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setDumpOutput(SimDebugBuilder.OutputType) - Method in interface nxopen.sim.SimDebugBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setDumpToFileName(String) - Method in interface nxopen.sim.SimDebugBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setDuplicateCheck(boolean) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setDuration(double) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setDuration(double) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setDurationOption(RSEvent.DurationOption) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: None.
- setDurationType(DurSpecialistLoadLengthBuilder.Definition) - Method in interface nxopen.cae.DurSpecialistLoadLengthBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setDwell(Cycle.DwellType) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setDwell(double) - Method in interface nxopen.cam.CycleDwell
-
License requirements: cam_base ("CAM BASE")
.
- setDwell(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDwellFinal(Cycle.DwellType) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setDwellFinalValue(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setDwellMode(CycleDwell.Mode) - Method in interface nxopen.cam.CycleDwell
-
License requirements: cam_base ("CAM BASE")
.
- setDwellStart(Cycle.DwellType) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setDwellStartValue(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setDwellType(CenterlineDrillTurningBuilder.DwellTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDwellUnit(TurnRoughFinishLocalReturnBuilder.DwellUnitTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setDwellValue(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setDxfRevision(ExportFlatPatternBuilder.DxfRevisionType) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setDxIncrement(double) - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDyIncrement(double) - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setDynamicAlignment(boolean) - Method in interface nxopen.preferences.SessionDrafting
-
Sets the dynamic alignment flag.
- setDynamicAlignmentInGlobalSelection(boolean) - Method in interface nxopen.annotations.CommonWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setDynamicConstraintDisplay(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not constraint symbols are displayed if the associated geometry is very small.
- setDynamicCsysOrientation(Matrix3x3) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setDynamicCsysOrientation(Matrix3x3) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setDynamicCsysOrigin(Point3d) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setDynamicCsysOrigin(Point3d) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setDynamicEventName(String) - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setDynamicFriction(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setDynamicInitialVelocityMethod(int) - Method in interface nxopen.motion.LmsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setDynamicIRayPlusCaustics(boolean) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setDynamicIRayPlusStudioRenderMode(IRayPlusStudioEditorBuilder.DynamicIRayPlusStudioRenderModeType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setDynamicMaxKinIteration(int) - Method in interface nxopen.motion.RecurdynSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setDynamicNormal(int, Vector3d) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Sets dynamic normal
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setDynamicParent(int, DisplayableObject) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Sets dynamic parent
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setDynamicPositioning(boolean) - Method in interface nxopen.assemblies.ComponentPatternBuilder
-
Sets the dynamic positioning flag.
- setDynamicProjection(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setDynamicProjection(boolean) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setDynamicRayTracedStudioTilingQuality(RayTracedStudioEditorBuilder.DynamicRayTracedStudioTilingQualityType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setDynamics(TirePropertyTnoBuilder.DynamicsType) - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setDynamicSectionVisible(DynamicSection, boolean) - Method in interface nxopen.ModelingView
-
Sets the specified dynamic section object is visible/invisible
in this view.
- setDynamicSolverAccelerationMethod(int) - Method in interface nxopen.motion.LmsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setDynamicUpdate(SessionModeling.DynamicUpdateType) - Method in interface nxopen.preferences.SessionModeling
-
Sets the dynamic update.
- setDynamicUpdate(int) - Method in interface nxopen.uf.UFModeling
-
- setE(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setE(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setEcadValue(String) - Method in interface nxopen.mechatronics.ComparisonResultAttribute
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEccAuto(boolean) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEccName(String) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEccName(String) - Method in interface nxopen.cae.ReassignElementsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEdge(Edge) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Sets the edge on which the flange is created.
- setEdgeChain(Section) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Sets the section having chain edges.
- setEdgeChainCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEdgeDefinition(BladeEdge.EdgeDefinitionType) - Method in interface nxopen.cam.BladeEdge
-
License requirements: cam_base ("CAM BASE")
.
- setEdgeDensity(Tag, UFSf.EdgeDensityData) - Method in interface nxopen.uf.UFSf
-
- setEdgeDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEdgeFace(int[]) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the edge or face id for which annotation is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEdgeId(int) - Method in interface nxopen.cae.PostSelectionEntity
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEdgeIndexToEdit(int) - Method in interface nxopen.die.QuickBinderBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEdgeIntegralOption(ResultProbeBuilder.EdgeIntegral) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEdgeIntegralOptionValue(PostGraphBuilder.EdgeIntegralOption) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEdgeLength(double) - Method in interface nxopen.cam.FormEdgesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEdgeLength(double) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setEdgeMatchOption(boolean) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEdgeMatchTolerance(double) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEdgeMergeAngle(double) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEdgePair(Edge, Edge) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Sets the pairing data between the two edges input.
- setEdgePrepValues(JointExitBuilder.Positions, double, double) - Method in interface nxopen.weld.JointExitBuilder
-
This method should be called multiple times.
- setEdgeReinforcementAlignment(StiffenerBuilder.EdgeReinforcementAlignmentMethod) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEdgeReinforcementPlacementMethod(StiffenerBuilder.EdgeReinforcementPlacementMethods) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEdges(Edge[]) - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder
-
The array of input edges for the break corner.
- setEdges(Edge[]) - Method in interface nxopen.tooling.QuickDatumCsysBuilder
-
Sets the selected edges.
- setEdgeSelectors(Edge[]) - Method in interface nxopen.geometricutilities.RegionTracker
-
The input target or tool edges used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEdgesEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade
-
Sets the edge emphasis flag.Alters how edges are displayed when Shaded Face Edges is flag is true.
- setEdgesHiddenByEdges(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the staus of edges hidden by edges.
- setEdgesHiddenByEdges(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setEdgesHiddenByEdges(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the staus of edges hidden by edges.
- setEdgesPrepared(boolean) - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setEdgeToEdgeConnectionMethodType(CAEConnectionBuilder.EdgeToEdgeConnectionMethodTypeEnum) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEdgeTolerance(double) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: None.
- setEdgeTolerance(double) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setEdgeTolerance(double) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
-
License requirements: None.
- setEdgeType(WeldGrooveBuilder.Edge) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setEdit(boolean) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setEditableText(String) - Method in interface nxopen.annotations.TitleBlockCellBuilder
-
License requirements: drafting ("DRAFTING")
.
- setEditAction(DesignElementBuilder.EditActionType) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setEditBlankOption(BlankGeneratorBuilder.EditBlankType) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setEditCopy(boolean) - Method in interface nxopen.facet.CreateTransitionBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setEditCopy(boolean) - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setEditCopy(boolean) - Method in interface nxopen.facet.DivideFacetFaceBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setEditCopy(boolean) - Method in interface nxopen.facet.FillHoleBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setEditCopy(boolean) - Method in interface nxopen.facet.LocalOffsetBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setEditCopy(boolean) - Method in interface nxopen.facet.MergeFacetFacesBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setEditCopy(boolean) - Method in interface nxopen.facet.RemoveUndercutsBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setEditCopy(boolean) - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setEditCopy(boolean) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setEditCopy(boolean) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setEditCopy(boolean) - Method in interface nxopen.features.SnipSurfaceBuilder
-
License requirements: None.
- setEditCopy(boolean) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling") OR nx_freeform_2 ("advanced freeform modeling")
.
- setEditedConstraintCurve(Curve) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEditFeatureGroup(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setEditFeatureGroup(Feature) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setEditGuidedExtension(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEditMethod(ScrapDesignBuilder.EditScrapType) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEditMode(boolean) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setEditOption(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setEditOption(IntermediateStageBuilder.EditOptions) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEditOptions(String[], int) - Method in interface nxopen.blockstyler.Tree
-
Sets the options in edit-control.
- setEditorText(String[]) - Method in interface nxopen.annotations.TextWithEditControlsBuilder
-
Text into the editor text
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setEditPoleEnabled(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setEditPolesEnabled(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setEditSizeChoice(QuickBinderWrapBuilder.EditSizeType) - Method in interface nxopen.die.QuickBinderWrapBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setEditStationNum(int) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEditType(QuickBinderBuilder.EditTypes) - Method in interface nxopen.die.QuickBinderBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEditType(SectionInViewBuilder.EditSxtype) - Method in interface nxopen.drawings.SectionInViewBuilder
-
Sets the type
License requirements: drafting ("DRAFTING")
.
- setEditWithRollbackFeature(Feature) - Method in interface nxopen.features.FeatureCollection
-
Sets the feature being edited with rollback
License requirements: None.
- setEditWithRollbackUponDoubleClick(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the option "Edit with Rollback upon Double-Click" gives choice of what action to
be taken on feature upon Double clicking, either in partnavigator or in Graphics widow.
- setEdmOption(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setEdmTemplate(EWDraftingBuilder.EDMTemplateOption) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setEdmTemplateName(String) - Method in interface nxopen.tooling.EWDraftingBuilder
-
The template name of edm sheet type to create drafting.
- setEffect(JointFrictionAdams.FrictionEffect) - Method in interface nxopen.motion.JointFrictionAdams
-
Sets the effect
License requirements: mechanisms ("MECHANISMS")
.
- setEffect(JointFrictionRecurDyn.FrictionEffect) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the effect
License requirements: mechanisms ("MECHANISMS")
.
- setEffectiveStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEffectiveStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEffectivityFormula(String, String) - Method in interface nxopen.pdm.SmartSaveObject
-
Sets the new effectivity formula to be applied on this smart save object
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setEffectivityType(EffectivityConditionBuilder.EffectivityConditionType) - Method in interface nxopen.EffectivityConditionBuilder
-
License requirements: None.
- setEjectionStartAngle(double) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEjectorDrawingType(EjectorTableBuilder.DrawingType) - Method in interface nxopen.tooling.EjectorTableBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setEjectorMoveOption(MotionSimulationBuilder.EjectorMoveOptions) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEjectorPinType(EjectorTableBuilder.EjectorType) - Method in interface nxopen.tooling.EjectorTableBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setElbowAppliedCharx(CharacteristicList) - Method in interface nxopen.routing.CornerTypeBuilder
-
Sets the applied charx for elbow creation
License requirements: routing_base ("Routing Basic")
.
- setElbowPart(CharacteristicList) - Method in interface nxopen.routing.CornerTypeBuilder
-
Sets the elbow part to be used for elbow creation
License requirements: routing_base ("Routing Basic")
.
- setElbowSnapSettings(ElbowSnapSettings) - Method in interface nxopen.routing.LinearPathBuilder
-
Sets the elbow snapping settings for determining location of control points
as the user drags their mouse.
- setElectrodeBlankBuilder(TaggedObject) - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setElectrodeNameFilter(String) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setElement(int) - Method in interface nxopen.annotations.ShipDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setElementalMapping(int) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setElementalNodalMapping(int) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setElementColorCycler(ModelDisplayBuilder.ElmClrBasis) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementConnectivity(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementConnectScope(AlignBeamElementDirectionBuilder.ConnectedElementScope) - Method in interface nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementConnectScope(AlignShellElementNormalBuilder.ConnectedElementScope) - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementContainer(MeshCollector) - Method in interface nxopen.cae.DestinationCollectorBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementcriteria(Result.ElementValueCriterion) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementDimension(ElementRotateBuilder.ElemDimensionType) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementDimension(ElementTranslateBuilder.ElemDimensionType) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementDimension(ElementTypeBuilder.ElementType) - Method in interface nxopen.cae.ElementTypeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementDimensionOption(ElementCreateBuilder.ElemDimType) - Method in interface nxopen.cae.ElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementDimensionOption(ElementExtrudeBuilder.ElemDimType) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementDimensionOption(ElementProjectBuilder.ElementDimensionType) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementDimensionOption(ElementReflectBuilder.ElemDimType) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementDimensionOption(ElementRevolveBuilder.ElemDimType) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementDimOpt(ReassignElementsBuilder.ElementDimensionOption) - Method in interface nxopen.cae.ReassignElementsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementDisplayQuality(ModelDisplayBuilder.ElmDispQuality) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementFaceStressAxis(DurabilityStressAxesBuilder.ElementFaceStressAxisEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setElementId(String) - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setElementId(String) - Method in interface nxopen.pid.PipeBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setElementLocation(DataLocation.Element) - Method in interface nxopen.cae.responsesimulation.DataLocation
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setElementLocation(ElementLocation) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setElementMarker(MarkerType0d) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults0d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementMarker(MarkerType0d) - Method in interface nxopen.cae.MeshDisplaySettings0d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementName(String) - Method in interface nxopen.annotations.ShipDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setElementNormals(ElementNormalsType) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementNormals(ElementNormalsType) - Method in interface nxopen.cae.MeshDisplaySettings2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementOffset(int) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementOrder(ElementTypeBuilder.ElementOrderType) - Method in interface nxopen.cae.ElementTypeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementQuality(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementReportFormat(ElementQualityCheckBuilder.ReportFormat) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElements(int[]) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The free body elements
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setElements(int[]) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the element ids for which annotation is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setElements(FEElement[]) - Method in interface nxopen.cae.ResultMeasureModelSubsetFE
-
Set the finite elements
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementSelectInternal(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshDisplaySettings1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshDisplaySettings2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementShrinkPercent(int) - Method in interface nxopen.cae.MeshDisplaySettings3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementSize(double) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementsOutputOption(ElementQualityCheckBuilder.OutputElements) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementType(String) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementType(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementType(LsdynaKfileGeneratorBuilder.MeshElementType) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setElementTypeName(String) - Method in interface nxopen.cae.ElementTypeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementTypeOpt(ReassignElementsBuilder.ElementTypeOption) - Method in interface nxopen.cae.ReassignElementsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElementValueAtNode(ResultsManipulationBuilder.ElementValueAtNode) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
Set element value to be used at a node
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementValueAtNode(ResultsManipulationBuilder.ElementValueAtNode) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
Set element value to be used at a node
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementValueAtNode(ResultsManipulationBuilder.ElementValueAtNode) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set element value to be used at a node
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElementValueCriterion(Result.ElementValueCriterion) - Method in interface nxopen.cae.CrossSectionParameters
-
Set how element the result is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setElementValueCriterion(Result.ElementValueCriterion) - Method in interface nxopen.cae.ResultParameters
-
Set how element the result is defined
This option is only valid for nodal and elemen-nodal result; dose not do anything for element result.
- setElemId(int) - Method in interface nxopen.cae.PostSelectionEntity
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setElemMaterialDisplayLaminateColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElemMaterialDisplayNoMaterialColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElemNodalOption(LaminateGraphicalReportBuilder.ElemNodalOptionType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setElemNodalOption(LaminateQuickReportBuilder.ElemNodalOptionType) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setElemNodalOption(LaminateSpreadsheetReportBuilder.ElemNodalOptionType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setElemQualFailColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElemQualFailShadedBorderColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElemQualPassColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElemQualPassTranslucency(int) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElemQualPassType(ModelDisplayBuilder.ElemQualPass) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElemSelectionMethod(AlignShellElementFirstEdgeBuilder.ElemSelectionMode) - Method in interface nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setElemtypes(boolean) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEmbeddedFile(int[]) - Method in interface nxopen.features.EmbedManagerBuilder
-
Set the index of the embedded file to process.
- setEmbeddedWorksheet(int) - Method in interface nxopen.features.BodyByEquationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEmbeddedWorksheet(int) - Method in interface nxopen.features.MathIntegrationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEmbedFileBrowser(String) - Method in interface nxopen.features.EmbedManagerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEmbedNativeFileBrowser(String) - Method in interface nxopen.features.EmbedManagerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEmbedWorksheet(boolean) - Method in interface nxopen.features.BodyByEquationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEmbedWorksheet(boolean) - Method in interface nxopen.features.MathIntegrationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEmphasis(ThroughCurveMeshBuilder.EmphasisType) - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setEmphasize(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setEmptyRefset(Component) - Method in interface nxopen.assemblies.ComponentAssembly
-
Convenience method for setting the reference set used to represent a component
to be empty
License requirements: None.
- setEnable(boolean) - Method in interface nxopen.blockstyler.UIBlock
-
License requirements: None.
- setEnable(boolean) - Method in interface nxopen.cae.responsesimulation.FunctionComponentData
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEnable(boolean) - Method in interface nxopen.motion.JointFriction
-
Sets the option of included
License requirements: mechanisms ("MECHANISMS")
.
- setEnable(boolean) - Method in interface nxopen.motion.PackagingBuilder
-
- setEnableAngularLowerLimit(boolean) - Method in interface nxopen.mechatronics.ChainJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableAngularLowerLimit(boolean) - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableAngularUpperLimit(boolean) - Method in interface nxopen.mechatronics.ChainJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableAngularUpperLimit(boolean) - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableBoundaryAdjustment(boolean) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEnableCollarPlate(boolean) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setEnableCollision(SimulationOptionsBuilder.Enable) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setEnableCornerCut(boolean) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setEnableDetailedOutput(boolean) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEnabledFacetCollectionRules(int) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setEnabledInView(View, boolean) - Method in interface nxopen.Light
-
Whether a light is to be enabled in a given view.
- setEnableDirectedDimension(boolean) - Method in interface nxopen.annotations.DimensionWorkflowBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setEnableDisplay(SimulationOptionsBuilder.Enable) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
- setEnableDoubleClickFlip(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setEnableEngraving(boolean) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setEnableFacetSelection(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setEnableFacetSelection(boolean) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setEnableFacetSelection(boolean) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setEnableForce(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the enable force
License requirements: mechanisms ("MECHANISMS")
.
- setEnableGapTolerance(boolean) - Method in interface nxopen.cae.ContactMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEnableHybridDesign(boolean) - Method in interface nxopen.Catiav5Creator
-
License requirements: None.
- setEnableIpw(SimulationOptionsBuilder.IpwEnable) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setEnableLevelBasedIpw(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setEnableLimitForce(boolean) - Method in interface nxopen.mechatronics.PositionControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableLimitForce(boolean) - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableLinearLowerLimit(boolean) - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableLinearUpperLimit(boolean) - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableLowerLimit(boolean) - Method in interface nxopen.mechatronics.HingeJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableLowerLimit(boolean) - Method in interface nxopen.mechatronics.LimitSwitchBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableLowerLimit(boolean) - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableMeshMorph(boolean) - Method in interface nxopen.cae.BaseFemPart
-
Sets the enable mesh morphing flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEnablePlcSimAdvTimeSyn(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnablePointWiring(boolean) - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEnablePreview(boolean) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the toggle of the Preview widget
License requirements: None.
- setEnableResize(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setEnableReverseDirection(boolean) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setEnableScale(boolean) - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
License requirements: None.
- setEnableSecondAnchor(boolean) - Method in interface nxopen.mechatronics.ChainJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableSmoothEdgesForLWView(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
- setEnableSmoothEdgesForLWView(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flat indicating whether the smart lightweight views should show the smooth edges
or render them as normal curves
License requirements: None.
- setEnableStereo(boolean) - Method in interface nxopen.preferences.SessionVisualizationSpecialEffects
-
Sets the enable stereo flag.
- setEnableTimeSync(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableTorque(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the enable torque
License requirements: mechanisms ("MECHANISMS")
.
- setEnableTrimmedAnimation(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the enable trimmed animation setting.
- setEnableUpperLimit(boolean) - Method in interface nxopen.mechatronics.HingeJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableUpperLimit(boolean) - Method in interface nxopen.mechatronics.LimitSwitchBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableUpperLimit(boolean) - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEnableUserDefinedDirection(boolean) - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEnableUserDefinedRotation(boolean) - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEnd(double) - Method in interface nxopen.cam.PitchSetting
-
License requirements: cam_base ("CAM BASE")
.
- setEnd(Port) - Method in interface nxopen.diagramming.ConnectionBuilder
-
License requirements: None.
- setEnd(double) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setEnd(Equipment, String, String) - Method in interface nxopen.pid.PipeBuilder
-
Sets the end port of this pipe.
- setEndAlignFillerSurfaceOption(AlignmentMethodBuilder.AlignFillerSurfaceType) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Sets the end align filler surface option
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setEndAngle(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndAngle(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEndAngle(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndAttributes(String, String, int) - Method in interface nxopen.die.RotorSectionBuilder
-
Sets the end faces attributes
License requirements: ug_die_design ("Die Design")
.
- setEndAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Sets the end faces attributes
License requirements: ug_die_design ("Die Design")
.
- setEndBlendScaleFactor(double) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndcapFace(ScCollector) - Method in interface nxopen.features.EmbossTarget
-
Sets the face to produce End-Cap
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndCapLimitPlaneOption(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndcapOption(EmbossLimit.EndcapMethod) - Method in interface nxopen.features.EmbossLimit
-
Sets the endcap method to create the End-Cap
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndcapPlane(ISurface) - Method in interface nxopen.features.EmbossTarget
-
Sets the plane to produce End-Cap
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndCapSize(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setEndcapSource(EmbossLimit.EndcapSourceOption) - Method in interface nxopen.features.EmbossLimit
-
Sets the endcap source option to decide where the End-Cap comes from
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndCapType(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setEndChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.MiddleHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.StartHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndCompensation(AeroFlangeBuilder.EndType, AeroFlangeBuilder.CompType, String) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Set end compensation.
- setEndConstraint(NXObject, boolean, boolean) - Method in interface nxopen.SketchMirrorPatternBuilder
-
This function removes end constraint from the given mirror pattern
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setEndConstraint(NXObject, int, boolean, boolean) - Method in interface nxopen.SketchOffsetBuilder
-
This function removes end constraint from the given offset
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setEndConstraint(NXObject, int, boolean, boolean) - Method in interface nxopen.SketchPatternBuilder
-
This function removes end constraint from the given pattern
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndContinuity(Continuity.ContinuityTypes) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setEndContinuityOption(BridgeCurveBuilder.ConstraintTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setEndCurveDirectionOption(BridgeCurveBuilder.CurveDirectionTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setEndCut(double) - Method in interface nxopen.cam.DmTrimExtend
-
License requirements: cam_base ("CAM BASE")
.
- setEndCutEnd(EdgeReinforcementBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setEndCutEnd(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setEndCutEnd(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setEndCutEnd(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setEndCutSplit(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setEndCutStart(EdgeReinforcementBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setEndCutStart(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setEndCutStart(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setEndCutStart(StiffenerSystemBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setEndCutType(PillarBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEndCutType(ProfileBuilder.EndCutOption) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setEndCutType(StiffenerBuilder.EndCutTypes) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEndDirection(Direction) - Method in interface nxopen.AutomaticTraceline
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setEndDirection(boolean) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setEndDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setEndDistance(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndDistance(double) - Method in interface nxopen.cam.InspectionScanArcBuilder
-
License requirements: None.
- setEndDistance(double) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: None.
- setEndDistance(double) - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
License requirements: None.
- setEndDistance(double) - Method in interface nxopen.cam.InspectionScanLineBuilder
-
License requirements: None.
- setEndDistance(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndDistance(String) - Method in interface nxopen.geometricutilities.CurveLengthData
-
Set end distance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndDistance(String) - Method in interface nxopen.weld.WeldPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setEndDistanceLocation(WeldParasetLocation) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the end dist location
License requirements: ugweld ("UG WELD")
.
- setEndEdge(boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder
-
License requirements: None.
- setEndEdgeConstraint(MatchEdgeBuilder.EdgeConstraintType) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setEndEdgeLocked(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setEndExtension(InheritableToolDepBuilder) - Method in interface nxopen.cam.FollowGeometryMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEndExtension(double) - Method in interface nxopen.routing.HealPath
-
Set end extension.
- setEndExtensionOption(CurveExtensionBuilder.ExtensionOption) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setEndExtensionOption(SplineExtensionBuilder.ExtensionOption) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndExtensions(double, double) - Method in interface nxopen.annotations.CenterlineBuilder
-
Modifies end extensions only
License requirements: drafting ("DRAFTING")
.
- setEndFaceBehavior(MoveEdgeBuilder.EndFaceBehaviorType) - Method in interface nxopen.features.MoveEdgeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndFaceBehavior(OffsetEdgeBuilder.EndFaceBehaviourType) - Method in interface nxopen.features.OffsetEdgeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndFlowDirection(SectionSurfaceBuilder.FlowDirectionEnum) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setEndFrame(NXObject) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setEndFrame(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setEndFrameName(String) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setEndGaps(boolean) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setEndGaps(boolean) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setEndGapsDistance(double) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setEndGapsDistance(double) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setEndHandlesLinked(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndian(SHMSignalConnectionBuilder.EndianType) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setEndingUValue(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setEndingVValue(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setEndIteration(BaseIteration) - Method in interface nxopen.cae.Post3DGraphBuilder
-
Set end iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEndIteration(BaseIteration) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
-
Set end iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEndIterIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEndIterValue(double) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEndLimitFaceNormalFlag(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndLimitFacesetCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndLimitHelperPoint(double[]) - Method in interface nxopen.features.RevolveBuilder
-
If until selected option is used for end limit and the selected entity intersects the revolve
multiple times, this point (in parasolid units) will help the system determine which intersection to select.
- setEndLimitPoint(Point) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndLine(NXObject) - Method in interface nxopen.cam.ThreadTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEndLocation(Point2d) - Method in interface nxopen.pid.PipeBuilder
-
Set the end location of this connection.
- setEndLocation1(Point) - Method in interface nxopen.drawings.HalfSectionLineBuilder
-
- setEndLocation1(Point) - Method in interface nxopen.drawings.OrientedSectionLineBuilder
-
- setEndLocation1(Point) - Method in interface nxopen.drawings.PointAndAngleSectionLineBuilder
-
- setEndLocation1(Point) - Method in interface nxopen.drawings.PointToPointSectionLineBuilder
-
- setEndLocation1(Point) - Method in interface nxopen.drawings.RevolvedSectionLineBuilder
-
- setEndLocation1(Point) - Method in interface nxopen.drawings.SteppedSectionLineBuilder
-
- setEndLocation2(Point) - Method in interface nxopen.drawings.OrientedSectionLineBuilder
-
- setEndLocation2(Point) - Method in interface nxopen.drawings.PointAndAngleSectionLineBuilder
-
- setEndLocation2(Point) - Method in interface nxopen.drawings.PointToPointSectionLineBuilder
-
- setEndLocation2(Point) - Method in interface nxopen.drawings.RevolvedSectionLineBuilder
-
- setEndLocation2(Point) - Method in interface nxopen.drawings.SteppedSectionLineBuilder
-
- setEndLocked(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setEndObjectOption(BridgeCurveBuilder.EndObjectTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setEndObjectType(BridgeCurveBuilderEx.EndObjectTypes) - Method in interface nxopen.features.BridgeCurveBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setEndOfFlangeProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RotorBuilder
-
Sets the end of flange profile of the die rotor casting.
- setEndOffset(double) - Method in interface nxopen.AutomaticTraceline
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setEndOffset(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEndOffset(String) - Method in interface nxopen.geometricutilities.FeatureOffset
-
- setEndOffsetAState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndOffsetBState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndOffsetLock(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setEndOrientation(ISurface[]) - Method in interface nxopen.die.RotorBuilder
-
Sets the end orientation of the rotor casting.
- setEndOrientation(ISurface) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the end orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.
- setEndParms(double) - Method in interface nxopen.routing.HealPath
-
Set end parameters.
- setEndPercent(double) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setEndPercentage(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndPercentage(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndPercentage(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndPlane(ISurface) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the end plane of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setEndPlane(AeroFlangeBuilder.EndType, Plane) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Set the end plane
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setEndPlane(Plane) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the end plane
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setEndPlane(Plane) - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setEndPlane(Plane) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEndPlane(Plane) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEndPlane(Plane) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setEndPlaneSelected(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setEndPoint(Point) - Method in interface nxopen.annotations.RegionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setEndPoint(Point) - Method in interface nxopen.AutomaticTraceline
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setEndPoint(double) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEndPoint(Point) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
License requirements: None.
- setEndPoint(Point) - Method in interface nxopen.cam.FollowCurveMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEndPoint(Point) - Method in interface nxopen.cam.FollowPartMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEndPoint(Point3d) - Method in interface nxopen.cam.PathLinearMotion
-
License requirements: cam_base ("CAM BASE")
.
- setEndPoint(Point) - Method in interface nxopen.cam.SplitSubopCommand
-
License requirements: None.
- setEndPoint(Point) - Method in interface nxopen.cam.TabPointDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEndPoint(Point) - Method in interface nxopen.cam.VectorDistanceMoveBuilder
-
License requirements: None.
- setEndPoint(Point) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setEndPoint(Point) - Method in interface nxopen.features.GeodesicLineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndPoint(Point) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setEndPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndPoint(Point) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndPoint(Point) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndPoint(Point3d) - Method in interface nxopen.Line
-
Sets the end point of the line
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setEndPoint(Point) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setEndPoint(Point3d) - Method in interface nxopen.routing.HealPath
-
Set the end point.
- setEndPoint(Point) - Method in interface nxopen.SketchConicBuilder
-
License requirements: None.
- setEndPointDirection(Direction) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setEndpointDisplayColor(int) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setEndpointDisplayInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setEndpointDisplayStyle(SessionModeling.EndpointDisplayStyleType) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setEndPointOptions(AssociativeArcBuilder.EndOption) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndPointOptions(AssociativeLineBuilder.EndOption) - Method in interface nxopen.features.AssociativeLineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndPointReference(AssociativeArcBuilder.EndReference) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndPointReference(AssociativeLineBuilder.EndReference) - Method in interface nxopen.features.AssociativeLineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEndPoints(Point3d, Point3d) - Method in interface nxopen.DatumAxis
-
Sets the end points of the datum axis
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndpoints(Point3d, Point3d) - Method in interface nxopen.Line
-
Sets the start and end points of the line
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setEndPoints(Point3d, Point3d) - Method in interface nxopen.routing.ISegment
-
Set the current location of the segment ends in ABS coordinates.
- setEndpointsDiameter(Point, Point, Expression) - Method in interface nxopen.cae.CylinderBoundingVolume
-
Sets the end points and diameter for the Cylinder Bounding Volume.
- setEndPointX(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setEndPointY(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setEndPointZ(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setEndPoleFixed(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setEndPositionType(TeachmodeLinearMoveBuilder.EndPositionTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEndProfileOriginCurveDirection(boolean) - Method in interface nxopen.routing.StockTransitionBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setEndRcps(ControlPoint, ControlPoint) - Method in interface nxopen.routing.ISegment
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setEndReferencePoint(Point) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setEndRegionPoint(Point) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setEndReleaseA1(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseA2(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseA3(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseA4(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseA5(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseA6(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseAState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseB1(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseB2(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseB3(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseB4(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseB5(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseB6(BeamEADBuilder.EndReleaseSetting) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndReleaseBState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEndRevolveAngle(double) - Method in interface nxopen.cae.AxiSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEndSection(Section) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Sets the end section of the lofted flange.The section profile should be open looped.
- setEndSection(boolean) - Method in interface nxopen.geometricutilities.SecondarySectionData
-
License requirements: None.
- setEndSectionPoint(Point3d) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Sets the start/end point of the end section.It can be start/end point of the section profile.
- setEndShape(RunnerBuilder.GuideEndType) - Method in interface nxopen.tooling.RunnerBuilder
-
License requirements: None.
- setEndSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Sets the end section sketch as slave.
- setEndStep(double) - Method in interface nxopen.cam.DmTrimExtend
-
License requirements: cam_base ("CAM BASE")
.
- setEndSurfaceDirectionOption(BridgeCurveBuilder.SurfaceDirectionTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setEndTangentDirection(TransitionCurveBuilder.TangentDirections) - Method in interface nxopen.geometricutilities.TransitionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEndTeeLocation(Pipe, String, int, double) - Method in interface nxopen.pid.PipeBuilder
-
Set the connection location for tee object at the end of the connection.
- setEndToEnd(boolean) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setEndToolAxis(Direction) - Method in interface nxopen.cam.FollowCurveMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEndTreatmentType(PillarBuilder.EndTreatmentTypes) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEndType(InspectionCparlnFeatureBuilder.EndTypes) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndType(BeadBuilder.EndTypeOptions) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Sets the bead end type .
- setEndType(LouverBuilder.EndTypeOptions) - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Sets the end type for the louver.
- setEndType(MiterOptions.TypeOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Sets the miter end type.
- setEndType0(CurveLengthBuilder.EndObjectType) - Method in interface nxopen.geometricutilities.CurveLengthBuilder
-
License requirements: None.
- setEndType1(CurveLengthBuilder.EndObjectType) - Method in interface nxopen.geometricutilities.CurveLengthBuilder
-
License requirements: None.
- setEndTypeOption(PillarBuilder.EndTypeOptions) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEndUDistance(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndUMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndUPercent(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndValue(double) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEndValue(String) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
- setEndVDistance(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndVector(Direction) - Method in interface nxopen.features.BridgeCurveBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setEndVector(Vector3d) - Method in interface nxopen.routing.HealPath
-
Set the end vector.
- setEndVector(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setEndVectorObject(Direction) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setEndVMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEndVPercent(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnergyCorrectionFactor(double) - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes
-
License requirements: None.
- setEnergyCorrectionFactor(double) - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes
-
License requirements: None.
- setEnergyLoss(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
- setEnergyLossOfSpecificEntities(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setEnergyLossPerSegment(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setEnforcedConstraints(boolean) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setEnforcePiecePart(Tag, boolean) - Method in interface nxopen.uf.UFPart
-
- setEngage(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setEngageFeedRate(double) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEngagement(double) - Method in interface nxopen.routing.IAxisPort
-
The engagment distance of a
IAxisPort
, i.e. the distance
behind the port that another fitting or stock may engage
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- setEngagement(double) - Method in interface nxopen.routing.PortConnection
-
Sets the engagement distance between the two ports connected by a Port Connection object.
- setEngagementObject(Expression) - Method in interface nxopen.routing.IAxisPort
-
Sets the engagement object of a port, i.e. an expression representing the
distance behind the port that another fitting or stock may engage
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- setEngageRetractType(NcmEngRetBuilder.EngageRetractTypes) - Method in interface nxopen.cam.NcmEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEngageRetractType(TurnEngageRetractBuilder.Types) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEngageRetractType(TurnThreadEngageRetractBuilder.EngageRetractTypes) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEngageType(NcmLaserEngage.Type) - Method in interface nxopen.cam.NcmLaserEngage
-
License requirements: cam_base ("CAM BASE")
.
- setEnglishScale(ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setEnglishSheetTemplateLocation(String) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setEngObjDescription(String) - Method in interface nxopen.ame.EditEngineeringObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEngobjectsToEdit(AMEEngObject[]) - Method in interface nxopen.ame.EditEngineeringObjectBuilder
-
Adds selected objects for Edit an aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEngObjName(String) - Method in interface nxopen.ame.EditEngineeringObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEngravingAmplitude(double) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setEngravingSoftness(double) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setEngRetMaxToolAxisChange(double) - Method in interface nxopen.cam.NcmSmoothingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEngRetTolerance(double) - Method in interface nxopen.cam.NcmSmoothingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEngRetToleranceSource(NcmSmoothingBuilder.SmoothToleranceSources) - Method in interface nxopen.cam.NcmSmoothingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEngRetType(NcmHoleMachiningEngRet.EngRetTypes) - Method in interface nxopen.cam.NcmHoleMachiningEngRet
-
License requirements: cam_base ("CAM BASE")
.
- setEngRetType(NcmPlanarEngRetBuilder.EngRetTypes) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEngRetType(NcmScEngRetBuilder.EngRetTypes) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setEnlarge(boolean) - Method in interface nxopen.tooling.SplitSolidBuilder
-
License requirements: None.
- setEnlargedSurfaceData(double[]) - Method in interface nxopen.tooling.SplitSolidBuilder
-
Keep enlarged surface data to create enlarged surface.
- setEnlargeOtherFaceOption(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setEnterTextString(String[]) - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
Set text string
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setEntireComponentPattern(boolean) - Method in interface nxopen.tooling.PocketBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR ug_die_design ("Die Design")
.
- setEntirePartRefset(Component) - Method in interface nxopen.assemblies.ComponentAssembly
-
Convenience method for setting the reference set used to represent a component
to be the entire part.
- setEntities(TaggedObject[]) - Method in interface nxopen.cae.CaeGroup
-
Set entities in to the group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEntities(DisplayableObject[]) - Method in interface nxopen.cae.ResultMeasureModelSubsetGeom
-
Set the geometry entities
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEntity(NXObject) - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
License requirements: None.
- setEntityIds(boolean, int[]) - Method in interface nxopen.cae.PostGraphBuilder
-
Set entity ids for extracting result data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEntityIds(int[]) - Method in interface nxopen.cae.PostGraphOrbitBuilder
-
Set entity ids for extracting result data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEntityNames(Step203Creator.EntityNameOption) - Method in interface nxopen.Step203Creator
-
- setEntityNames(Step214Creator.EntityNameOption) - Method in interface nxopen.Step214Creator
-
- setEntityNames(StepCreator.EntityNameOption) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setEntityObjects(TaggedObject[]) - Method in interface nxopen.cae.PostGraphBuilder
-
Sets the entity objects for extracting result data.
- setEntityObjects(TaggedObject[]) - Method in interface nxopen.cae.ResultProbeBuilder
-
Sets the entity objects for extracting result data.
- setEntityOption(NodeElementInfoBuilder.EntityType) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEntityOption(ThicknessBuilder.EntityType) - Method in interface nxopen.cae.ThicknessBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEntityType(int) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setEntityType(int) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setEntityType(int) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setEntityType(int) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setEntityType(int) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setEntityType(int) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setEntityType(GeometryLocationData.EntityTypes) - Method in interface nxopen.geometricutilities.GeometryLocationData
-
License requirements: None.
- setEntranceDiameter(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setEntryAvoidance(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEntryEndOffset(double) - Method in interface nxopen.cam.MachiningRegionBuilder
-
License requirements: None.
- setEntryExitDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEntryMethodOption(InitialConditions.EntryMethod) - Method in interface nxopen.cae.responsesimulation.InitialConditions
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEntryPoint(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEntryStartOffset(double) - Method in interface nxopen.cam.MachiningRegionBuilder
-
License requirements: None.
- setEntryTransition(InspectionMethodBuilder.TransitionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnum(String, int) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the value for the given property name.
- setEnum(String, int) - Method in interface nxopen.PropertyContainer
-
Sets the value for the given property name.
- setEnumAsString(String, String) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the value for the given property name.
- setEnumAsString(String, String) - Method in interface nxopen.PropertyContainer
-
Sets the value for the given property name.
- setEnumAttributeName(AssemblyDrawingBuilder.AttributeNames) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEnumAttributeValue(AssemblyDrawingBuilder.AttributeValues) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEnumCompList(BomBuilder.TreeList) - Method in interface nxopen.tooling.BomBuilder
-
License requirements: None.
- setEnumCylinderType(BomBuilder.Circle) - Method in interface nxopen.tooling.BomBuilder
-
License requirements: None.
- setEnumDataLength(int) - Method in interface nxopen.ame.PlcVendorSymbolBuilder
-
License requirements: None.
- setEnumDrawingType(AssemblyDrawingBuilder.DrawingTypes) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEnumerationOptions(String[]) - Method in interface nxopen.report.EnumerationArgument
-
Sets the enumeration options.
- setEnumFilter(LineDesignerMappingBuilder.FilterType) - Method in interface nxopen.ame.LineDesignerMappingBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEnumMembers(String[]) - Method in interface nxopen.blockstyler.Enumeration
-
Sets the Enum members.
- setEnumMembers(String, String[]) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the enum members for the given property of type enum.
- setEnumMembers(String, String[]) - Method in interface nxopen.PropertyContainer
-
Sets the enum members for the given property of type enum.
- setEnumMethod(FilletBuilder.EnumSkipWeldMethod) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setEnumParameterExtent(InspectionToleranceOperationBuilder.ParamExtent) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamPriMatModifier(InspectionToleranceOperationBuilder.ParamPriDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamPriMatModifier1(InspectionToleranceOperationBuilder.ParamPriDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamSecMatModifier(InspectionToleranceOperationBuilder.ParamSecDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamSecMatModifier1(InspectionToleranceOperationBuilder.ParamSecDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamSubType(InspectionToleranceOperationBuilder.ParamSubType) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamTerMatModifier(InspectionToleranceOperationBuilder.ParamTerDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamTerMatModifier1(InspectionToleranceOperationBuilder.ParamTerDatumModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamTolMatModifier(InspectionToleranceOperationBuilder.ParamTolMatModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamTolMatModifier1(InspectionToleranceOperationBuilder.ParamTolMatModifier) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamTolMatModifierDup(InspectionToleranceOperationBuilder.ParamTolMatModifierDup) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamTolZoneShape(InspectionToleranceOperationBuilder.ParamTolZoneShape) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamTolZoneShape1(InspectionToleranceOperationBuilder.ParamTolZoneShape) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumParamXYZAxis(InspectionToleranceOperationBuilder.ParamXYZAxis) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumPCSABS(InspectionToleranceOperationBuilder.SirVecPCSABS) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumPostCrossStyle(RailingFeatureBuilder.SelPostcrossStyle) - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setEnumRailCrossStyle(RailingFeatureBuilder.RailCrossStyle) - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setEnumRevisionRule(LoadLineDesignerBuilder.RevisionRuleType) - Method in interface nxopen.ame.LoadLineDesignerBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEnumSensitivity(int[]) - Method in interface nxopen.blockstyler.Enumeration
-
Sets EnumSensitivity
License requirements: None.
- setEnumSheets(AssemblyDrawingBuilder.DrawingCreateOrEdit) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEnumSpacing(VentilationHoles2Builder.ArraySpacing) - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setEnumSpacingType(RailingFeatureBuilder.SpaceType) - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setEnumStockStyle(StockStyleBuilder.StockStyle) - Method in interface nxopen.routing.StockStyleBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setEnumStockType(BomBuilder.Shape) - Method in interface nxopen.tooling.BomBuilder
-
License requirements: None.
- setEnumTorusCharacteristic(InspectionToleranceOperationBuilder.ParamXYZAxis) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumType(ObjectAttributeReferenceBuilder.LeaderType) - Method in interface nxopen.formboard.ObjectAttributeReferenceBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setEnumTypeOutput(InspectionOutputOperationBuilder.TypeOutput) - Method in interface nxopen.cam.InspectionOutputOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setEnumValue(int) - Method in interface nxopen.display.IrayPlusMaterialAttributeEnum
-
License requirements: None.
- setEnumVisibility(int[]) - Method in interface nxopen.blockstyler.Enumeration
-
Sets EnumVisibility
License requirements: None.
- setEnvelopeConcavity(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEnvelopeOffset(TireEnvelopeBuilder.EnvelopeOffsetMethod) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEnvelopeVal(AxiSymmetricParameters.EnvVal) - Method in interface nxopen.cae.AxiSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEnvironmentMapEnum(TrueShadingBuilder.EnvironmentMapType) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setEnvironmentMapFileBrowser(String) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setEnvironmentVariableValue(String, String) - Method in interface nxopen.Session
-
Sets the value of a NX enviroment variable
License requirements: None.
- setEnvValue(CyclicSymmetricParameters.EnvelopeValue) - Method in interface nxopen.cae.CyclicSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEnvVarName(String) - Method in interface nxopen.cam.UserDefinedOprBuilder
-
License requirements: None.
- setEoDataItem(NXObject) - Method in interface nxopen.ame.EODataItemAttributeHolder
-
Set EODataItem
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEodef(NXObject) - Method in interface nxopen.ame.EODefAttributeHolder
-
Set EOdef
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEoName(String) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEqualArcLengthMethod(ProjectCurveBuilder.ArcLengthType) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setEqualArcLengthSegments(int) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setEqualDiameterEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setEqualDimensionCompareTolerance(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setEqualDimensionTolerance(double) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setEqualLength(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setEqualLength(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEqualParameterSegments(int) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setEqualRadius(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setEqualRadius(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEqualRadius2dComponentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setEqualRadiusEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setEqualRadiusSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setEqualSegmentMethod(DivideCurveBuilder.EqualSegmentOption) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setEqualSegmentsOption(SubdivideSegmentBuilder.EqualSegmentsMethod) - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setEquidistantStock(double) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setEquivalentStressMethod(DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setErectionSplitSystem(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setErrorCode(int) - Method in interface nxopen.drafting.DrawingAutomationWizard
-
Sets the error code to be returned from the callback
License requirements: None.
- setErrorCode(int) - Method in interface nxopen.features.CustomFeatureEvent
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setErrorHndl(ResultProbeBuilder.ErrorHandling) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setErrorLevel(Validation.Result) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setErrorLevelOfGroupLabel(GroupLabel, Validation.Result) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setErrorLimit(int) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setErrorMessage(String) - Method in interface nxopen.weld.WeldJointBuilder
-
Sets an error message to display
License requirements: structure_weld ("STRUCTURE WELD")
.
- setErrorMessageDisplay(boolean) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setErrorReduction(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setEssentialThinning(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setEvaluationErrorOption(ResultsCombinationBuilder.EvaluationError) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
Set evaluation error option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEvaluationErrorOption(ResultsReductionBuilder.EvaluationError) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set evaluation error option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEvaluationErrorOption(TransientResultsReductionBuilder.EvaluationError) - Method in interface nxopen.cae.TransientResultsReductionBuilder
-
Set evaluation error option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setEvaluationMethod(RmsLcrEvaluationMethod) - Method in interface nxopen.cae.responsesimulation.RmsResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEvaluationMethodOption(CombinationEvaluationOptions.EvaluationMethod) - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEvaluationMode(GapFlushnessBuilder.EvaluationModes) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEvaluationPlane(AssociativeAngleBuilder.EvaluationPlaneType) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setEvaluationPoint(Point) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setEvaluationPoint(Point) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEvaluationPointOption(RollingLineBuilder.StartEvaluationTypes) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setEvaluationPoints(double[], Unit[]) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
Sets evaluation point
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setEvaluationType(FrequencyDefinition.Definition) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEvaluationType(GapFlushnessBuilder.EvaluationTypes) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Sets the evaluation type
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setEvaluatorObjects(ExpressionEvaluator[]) - Method in interface nxopen.ame.EvaluatorCopyToBuilder
-
Selected evaluators that will be copied
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setEvalutionErrorsOption(PostGraphBuilder.EvalutionErrors) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setEvenComplexData(double, double, double[], double[]) - Method in interface nxopen.cae.ftk.ArrayRecord2DEven
-
Sets even complex data
License requirements: None.
- setEvenRealData(double, double, double[]) - Method in interface nxopen.cae.ftk.ArrayRecord2DEven
-
Sets even real data
License requirements: None.
- setEvent(DurSpecialistEvent) - Method in interface nxopen.cae.DurSpecialistLoadProviderBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEventCondition(SignalChartListItem.Condition) - Method in interface nxopen.motion.SignalChartListItem
-
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setEventDamage(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEventDamage(boolean) - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEventDamage(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEventDamageDirection(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEventFlag(boolean) - Method in interface nxopen.cam.LaserControlPoint
-
License requirements: cam_base ("CAM BASE")
.
- setEventLife(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEventLife(boolean) - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEventLife(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEventName(String) - Method in interface nxopen.cae.DurabilityEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setEventName(String) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- setEventName(String, boolean) - Method in interface nxopen.cae.responsesimulation.RSEvent
-
Sets the event name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setEventType(RSEvent.Type) - Method in interface nxopen.cae.responsesimulation.RSEventBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setExact(boolean) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExact(boolean) - Method in interface nxopen.MeasureDistanceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExactBinderProfiles(boolean) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setExactSheetbodyOption(boolean) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setExactSheetbodyOption(boolean) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setExampleDesc(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExchangePLCRelevantProduct(boolean) - Method in interface nxopen.ame.ProductSelectionBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setExchangeProductForNotLockedTemplate(boolean) - Method in interface nxopen.ame.ProductSelectionBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setExcitationAxis(LaminateRandomEventBuilder.ExcitationAxisEnum) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- setExcitationCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- setExcitationCsys(CoordinateSystem) - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setExcitationLocationId(int) - Method in interface nxopen.cae.responsesimulation.ExcitationLocationDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setExcitationLocationType(ExcitationBuilder.ExcitationLocationType) - Method in interface nxopen.cae.responsesimulation.ExcitationLocationDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setExcitationName(String) - Method in interface nxopen.cae.DurabilityExcitationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setExcitationName(String) - Method in interface nxopen.cae.responsesimulation.Excitation
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setExcitationSelectedAxis(LaminateDynamicEventBuilder.ExcitationSelectedAxisEnum) - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setExcitationType(DurabilityStaticEventBuilder.ExcitationTypeEnum) - Method in interface nxopen.cae.DurabilityStaticEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setExcludeDatumsFromFit(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Sets the option to specify whether datum objects and planar ship grids should not be examined
when a Fit is done.
- setExcludeElementsNotVisible(boolean) - Method in interface nxopen.cae.ResultParameters
-
- setExcludeFromSpatialSearch(boolean) - Method in interface nxopen.pdm.ModelElementRevision
-
Set or unset this model element revision from exclusion from spatial search.
- setExcludeNonOwnerParts(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setExcludeReadonlyParts(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setExcludeRules(Tag, int) - Method in interface nxopen.uf.UFClear
-
- setExcludeRxConstraint(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the options of excluded rx constraint.
- setExcludeRyConstraint(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the option of excluded ry constraint.
- setExcludeRzConstraint(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the options of excluded rz constraint.
- setExcludesColor(NXColor) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
License requirements: None.
- setExcludeXConstraint(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the options of excluded x constraint.
- setExcludeYConstraint(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the options of excluded y constraint.
- setExcludeZConstraint(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the options of excluded z constraint.
- setExecuteMode(DisplayChangerBuilder.ExecuteModes) - Method in interface nxopen.mechatronics.DisplayChangerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExecuteMode(ReadWriteDeviceBuilder.ExecuteMode) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder
-
Sets execute mode.
- setExecuteOnce(boolean) - Method in interface nxopen.mechatronics.ObjectTransformerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExecuteOnce(boolean) - Method in interface nxopen.mechatronics.TransmitterEntryBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExistingAutomaticAnnotation(DrawingAnnotationBuilder.Annotation) - Method in interface nxopen.features.shipdesign.DrawingAnnotationBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setExistingAutomaticAnnotationOption(AnnotateViewsBuilder.ExistingAutomaticAnnotation) - Method in interface nxopen.drafting.AnnotateViewsBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setExistingEefFile(String) - Method in interface nxopen.cae.responsesimulation.InitialConditions
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setExistingFile(String) - Method in interface nxopen.cae.ConvertToConvergentBodyBuilder
-
License requirements: None.
- setExistingPartAction(PartOperationImportBuilder.ExistingPartAction) - Method in interface nxopen.pdm.NativePartLogicalObject
-
Sets the existing part action defined for this part
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setExistingPartAttributes(LogicalObject, String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Set attributes of existing part on the given logical object so that
the part gets imported into specified existing item based on action.
- setExistingPlane(DisplayableObject) - Method in interface nxopen.geometricutilities.SupportPlaneData
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setExistingSymbol(Node) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setExistingSymbol(Port) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setExistingSymbolLogicalElementRevision(Equipment) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setExitAvoidance(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExitEndOffset(double) - Method in interface nxopen.cam.MachiningRegionBuilder
-
License requirements: None.
- setExitLoop(boolean) - Method in interface nxopen.tooling.TraverseLoopBuilder
-
License requirements: None.
- setExitPoint(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExitStartOffset(double) - Method in interface nxopen.cam.MachiningRegionBuilder
-
License requirements: None.
- setExitTransition(InspectionMethodBuilder.TransitionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExpandChildNodes(boolean) - Method in interface nxopen.shipdesign.ShipNavigatorNodeBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setExpanded(boolean) - Method in interface nxopen.blockstyler.UIBlock
-
License requirements: None.
- setExpanded(boolean) - Method in interface nxopen.diagramming.NodeBuilder
-
License requirements: None.
- setExpandedFiles(String[]) - Method in interface nxopen.annotations.ImportSymbolBuilder
-
Sets the names of the expanded files
License requirements: nx_layout ("NX Layout")
.
- setExpansionRadius1(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExpansionRadius2(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExpansionRadiusFactor1(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExpansionRadiusFactor2(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExperience(int) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setExploreReport(VisualReportExplorer.ExploreReportOption) - Method in interface nxopen.visualreporting.VisualReportExplorer
-
License requirements: None.
- setExplosion(boolean) - Method in interface nxopen.userdefinedtemplate.InstantiationBuilder
-
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- setExpName(String) - Method in interface nxopen.motion.ResultMeasureBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setExportAs(DxfdwgCreator.ExportAsOption) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setExportAs(StepCreator.ExportAsOption) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setExportAttributesName(String[]) - Method in interface nxopen.mechatronics.ECADExportBuilder
-
- setExportControlData(String) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setExportData(ResultParameters[], int[], CreateJtBuilder.Component[]) - Method in interface nxopen.cae.CreateJtBuilder
-
The result parameters
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setExportData(DxfdwgCreator.ExportDataOption) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setExportData(NXTo2dCreator.ExportDataOption) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setExportDrawingFile(boolean) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setExportDrawings(boolean) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setExportedAttributes(String[]) - Method in interface nxopen.weld.ExportWeldBuilder
-
Set the attributes of weld points to be exported to CSV file
License requirements: ugweld ("UG WELD")
.
- setExportExtRef(boolean) - Method in interface nxopen.Step203Creator
-
- setExportExtRef(boolean) - Method in interface nxopen.Step214Creator
-
- setExportExtRef(boolean) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setExportExtRefStructureAs(Step203Creator.ExternalReferenceStructureOption) - Method in interface nxopen.Step203Creator
-
- setExportExtRefStructureAs(Step214Creator.ExternalReferenceStructureOption) - Method in interface nxopen.Step214Creator
-
- setExportExtRefStructureAs(StepCreator.ExternalReferenceStructureOption) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setExportFacesAs(DxfdwgCreator.ExportFacesAsOptions) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setExportFile(String) - Method in interface nxopen.mechatronics.ECADExportBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExportFile(String) - Method in interface nxopen.mechatronics.ExportSensorsActuatorsBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExportFile(String) - Method in interface nxopen.mechatronics.SCOUTExportBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExportFileFormat(ECADExportBuilder.ExportFileType) - Method in interface nxopen.mechatronics.ECADExportBuilder
-
- setExportFileFormat(SCOUTExportBuilder.ExportFileType) - Method in interface nxopen.mechatronics.SCOUTExportBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExportFormatInLegacyFile(boolean) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the option to export the format at the top of a legacy routelist file.
- setExportFrom(Catiav5Creator.ExportFromOption) - Method in interface nxopen.Catiav5Creator
-
License requirements: None.
- setExportFrom(DxfdwgCreator.ExportFromOption) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setExportFrom(IgesCreator.ExportFromOption) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setExportFrom(NXTo2dCreator.ExportFromOption) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setExportFrom(Step203Creator.ExportFromOption) - Method in interface nxopen.Step203Creator
-
- setExportFrom(Step214Creator.ExportFromOption) - Method in interface nxopen.Step214Creator
-
- setExportFrom(StepCreator.ExportFromOption) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setExportMesh(boolean) - Method in interface nxopen.cae.ElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExportMesh(boolean) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExportMesh(boolean) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExportMesh(boolean) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExportMesh(boolean) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExportMesh(boolean) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExportMesh(boolean) - Method in interface nxopen.cae.Mesh2dBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExportMeshProperty(boolean) - Method in interface nxopen.cae.Mesh
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setExportModelData(boolean) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setExportMotion(String) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setExportOption(BaseDataImportExportBuilder.ExportOptions) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setExportScaleOption(DxfdwgCreator.ExportScaleOptions) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setExportScaleValue(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setExportSplinesAs(DxfdwgCreator.ExportSplinesAsOptions) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setExportToggleState(boolean) - Method in interface nxopen.cam.ManageToolPartBuilder
-
License requirements: None.
- setExportToSolver(boolean) - Method in interface nxopen.cae.SurfaceCoatBuilder
-
License requirements: None.
- setExpression(NXObject) - Method in interface nxopen.ame.PortsManagerBuilder
-
Sets the dynamic connection expression
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setExpression(Expression) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setExpression(Expression) - Method in interface nxopen.drawings.ViewScaleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setExpression(Expression) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setExpression(String) - Method in interface nxopen.features.RPOBuilder
-
- setExpression(String) - Method in interface nxopen.features.RPODimension
-
Sets the expression of the dimension.
- setExpression(Expression) - Method in interface nxopen.fields.ComplexScalarFieldWrapper
-
Sets the implementation of the wrapper to the specified expressions
License requirements: None.
- setExpression(Expression) - Method in interface nxopen.fields.ScalarFieldWrapper
-
Sets the implementation of the wrapper to the specified expression
License requirements: None.
- setExpression(String) - Method in interface nxopen.IPlane
-
Sets the plane expression.
- setExpression(String) - Method in interface nxopen.positioning.Constraint
-
The
Expression
of a constraint - only for distance or angle constraints.
- setExpression(String) - Method in interface nxopen.routing.RoutePartDescriptor
-
License requirements: routing_base ("Routing Basic")
.
- setExpressionDriven(boolean) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setExpressionForScale(Expression) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the expression for scale
License requirements: drafting ("DRAFTING")
.
- setExpressionMode(DrivingValueBuilder.DrivingExpressionMode) - Method in interface nxopen.annotations.DrivingValueBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setExpressionName(String) - Method in interface nxopen.annotations.DrivingValueBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setExpressionObject(TaggedObject) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setExpressionOption(CopyPasteBuilder.ExpressionTransferOption) - Method in interface nxopen.features.CopyPasteBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExpressionOption(PatternFeatureBuilder.ExpressionTransferOptions) - Method in interface nxopen.features.PatternFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExpressionOption(SketchDimensionBuilder.ExpOption) - Method in interface nxopen.SketchDimensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setExpressions(Expression[]) - Method in interface nxopen.ExpressionGroup
-
Add expressions to an expression group
License requirements: None.
- setExpressions(Expression[]) - Method in interface nxopen.features.MapleBuilder
-
- setExpressions(Expression[]) - Method in interface nxopen.features.MathIntegrationBuilder
-
Set the expressions in the Math Interface Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExpressions(Expression[]) - Method in interface nxopen.fields.ComplexVectorFieldWrapper
-
Sets the implementation of the wrapper to the specified expressions
License requirements: None.
- setExpressions(Expression[]) - Method in interface nxopen.fields.VectorFieldWrapper
-
Sets the implementation of the wrapper to the specified expressions
License requirements: None.
- setExpressions(Expression[], String[]) - Method in interface nxopen.InterpartExpressionsBuilder
-
Set an array of source expressions.
- setExpressionsData(DeformDefinitionBuilder.JaDeformDefinitionExpData, String[]) - Method in interface nxopen.features.DeformDefinitionBuilder
-
Sets data of single expression for deform definition feature.
- setExpressionsFor4gd(Component, Component, Expression[], String[]) - Method in interface nxopen.InterpartExpressionsBuilder
-
Interface for 4gd
License requirements: None.
- setExpressionSortTypeAsString(String) - Method in interface nxopen.blockstyler.ChooseExpression
-
License requirements: None.
- setExpressionStatureData(String) - Method in interface nxopen.features.HumanBuilder
-
Sets human stature data using expression
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setExpressionTypeIndexAsString(String) - Method in interface nxopen.blockstyler.ChooseExpression
-
License requirements: None.
- setExpressionWeightData(String) - Method in interface nxopen.features.HumanBuilder
-
Sets human weight data using expression
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setExtendAcrossUndercut(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setExtendAngle(double) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
License requirements: None.
- setExtendAtConvexCorner(boolean) - Method in interface nxopen.cam.ToolAxisChange
-
License requirements: cam_base ("CAM BASE")
.
- setExtendAtStart(CutParametersExtendAtStartMode) - Method in interface nxopen.cam.TurnCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setExtendBendRelief(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the option to extend the bend relief if required.
- setExtendBound(boolean) - Method in interface nxopen.SketchQuickExtendBuilder
-
License requirements: None.
- setExtendBound(boolean) - Method in interface nxopen.SketchQuickTrimBuilder
-
License requirements: None.
- setExtendBoundaryObject(boolean) - Method in interface nxopen.features.TrimSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExtendDirection(Axis) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setExtendDistance(double) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
License requirements: None.
- setExtendDistance(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setExtendDistance(double) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setExtendEdges(FilletBuilder.EnumExtendEdges) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setExtendEdgeToBoundaryToggle(boolean) - Method in interface nxopen.cae.EdgeFaceImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setExtendedTicBegin(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setExtendedTicColor(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setExtendedTicFont(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setExtendedTicFrequency(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setExtendedTicLength(double) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setExtendedTicWidth(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setExtendEndFace(boolean) - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setExtendFactor(double) - Method in interface nxopen.features.OffsetCurveBuilder
-
- setExtendFlange(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setExtendFloorTo(CutParametersExtendFloorTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setExtendGuideCurve(boolean) - Method in interface nxopen.cam.GuidedCurveBuilder
-
License requirements: None.
- setExtendImprints(boolean) - Method in interface nxopen.features.shipdesign.DivideBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setExtendImprints(boolean) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setExtendImprints(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setExtendMethod(ToolPathEditorBuilder.ExtendMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setExtendMethod(TurnEngageRetractBuilder.ExtendMethods) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setExtendMethod(AOCSBuilder.Extend) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setExtendMethod(WeldPointExtendMethod) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the offset curve extend method.
- setExtendMode(RoughFinishTurningBuilder.ExtendModeTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setExtendNewFace(boolean) - Method in interface nxopen.features.TrimExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setExtendOffset(boolean) - Method in interface nxopen.weld.JointmarkGuideBuilder
-
License requirements: ugweld ("UG WELD")
.
- setExtendOption(boolean) - Method in interface nxopen.features.DividefaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setExtendProfile(boolean) - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Sets the Extend Option
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setExtendProfile(boolean) - Method in interface nxopen.features.sheetmetal.JogBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setExtendStartFace(boolean) - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setExtendSurface(boolean) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setExtendToBoundary(boolean) - Method in interface nxopen.cam.UpDownCutting
-
License requirements: cam_base ("CAM BASE")
.
- setExtendToBoundary(boolean) - Method in interface nxopen.weld.WeldBeadBuilder
-
License requirements: ugweld ("UG WELD")
.
- setExtendToFaceEdgesOption(ReusePositioningObjectBuilder.CurveExtendToFace) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Sets the extend option for curve operation.
- setExtendToFaceOption(AOCSBuilder.ExtendToFace) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setExtendToPart(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setExtendType(ExtensionBuilder.Extension) - Method in interface nxopen.features.ExtensionBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setExtendValues(double[]) - Method in interface nxopen.cam.DPMItpBuilder
-
- setExtendWalls(boolean) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setExtension(double) - Method in interface nxopen.annotations.Centerline2dSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setExtension(double) - Method in interface nxopen.annotations.Centerline3dSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setExtension(double) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setExtension(double) - Method in interface nxopen.annotations.CircleCenterlineSettingsBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setExtension(double) - Method in interface nxopen.annotations.IntersectionSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setExtension(double) - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setExtension(double) - Method in interface nxopen.annotations.SymmetricalCenterlineSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setExtensionAttributes(String, String, int) - Method in interface nxopen.die.ThroatChildBuilder
-
Sets the extension attributes, note existance of attributes depends on usage in
main feature.
- setExtensionAttributes(String, String, int) - Method in interface nxopen.die.ThroatParentBuilder
-
Sets the extension attributes, note existance of attributes depends on usage in
main feature.
- setExtensionDirection(ExtensionDirection) - Method in interface nxopen.geometricutilities.CurveLengthData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExtensionDistance(String) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setExtensionDistance(String) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setExtensionDistance(String) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setExtensionLength(String) - Method in interface nxopen.die.ThroatChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setExtensionLineDisplay(ExtensionLineDisplay) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the extension line display
License requirements: None.
- setExtensionLineDisplay(ExtensionLineDisplay) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setExtensionMethod(TrimExtendBuilder.ExtensionMethods) - Method in interface nxopen.features.TrimExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setExtensionMethod(ExtensionMethod) - Method in interface nxopen.geometricutilities.CurveLengthData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExtensionMethod(FilletBuilder.EnumExtensionMethod) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setExtensionOption(ModelTerminalsBuilder.ExtensionValueOption) - Method in interface nxopen.routing.ModelTerminalsBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setExtensionSide(ExtensionSide) - Method in interface nxopen.geometricutilities.CurveLengthData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExtensionSolution(CoolingDefineChannelBuilder.ExtensionTypes) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setExtensionType(SteelInsertSectionBuilder.ExtensionTypeOption) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Sets the extension type
License requirements: ug_die_design ("Die Design")
.
- setExtensionType(SteelInsertSegmentChildBuilder.ExtensionTypeOption) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Sets the extension type
License requirements: ug_die_design ("Die Design")
.
- setExtensionType(SteelInsertSegmentParentBuilder.ExtensionTypeOption) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Sets the extension type
License requirements: ug_die_design ("Die Design")
.
- setExtensionType(EnlargeBuilder.ExtensionTypes) - Method in interface nxopen.features.EnlargeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setExtensionVector(Direction) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setExtent(Point3d, Point3d, Point3d, Point3d) - Method in interface nxopen.display.PlanarShipGridBuilder
-
Set corner points for the grid extent.
- setExtentCurve(Curve) - Method in interface nxopen.features.GeodesicTrimBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExtentType(CamInspectionOperationExtenttypes) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExternalFrameAnchorName(String) - Method in interface nxopen.routing.PlatformCreatorBuilder
-
License requirements: routing_platform ("Routing Platform")
.
- setExternalReferences(DisplayableObject[], String[]) - Method in interface nxopen.features.DeformDefinitionBuilder
-
Sets external references for deform definition feature.
- setExternalSignalName(String) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExtMenuPropertyValue(String, String) - Method in interface nxopen.cae.PropertyTable
-
Sets the ext menu value of the property
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setExtraCrossDrive(boolean) - Method in interface nxopen.cam.CleanupSettings
-
License requirements: cam_base ("CAM BASE")
.
- setExtractedEdgeFaceDisplay(SessionDrafting.EdgeFaceDisplayType) - Method in interface nxopen.preferences.SessionDrafting
-
Sets the extracted edge face display
License requirements: None.
- setExtractedEdges(GeneralExtractedEdgesOption) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the extracted edge, that provides an alternative way to display
model geometry in a drawing view.
- setExtractedEdges(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setExtractedEdges(GeneralExtractedEdgesOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setExtractedEdges(GeneralExtractedEdgesOption) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the extracted edge that provides an alternative way to display
model geometry in a drawing view.
- setExtractEdgeDistance(InspectionConstructedFeatureBuilder.ExtractEdgeDistanceType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExtractEndDistance(double) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExtractFaceBuilder(ExtractFaceBuilder) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExtractGussetCurves(boolean) - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setExtractMethod(StudioXformBuilderEx.ExtrationMethodType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setExtractStartDistance(double) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setExtractTolerance(double) - Method in interface nxopen.features.IFormBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setExtractTolerance(double) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setExtractType(ExtractAttributeBuilder.Type) - Method in interface nxopen.ame.ExtractAttributeBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setExtrapolation(AfuData.ExtrapolationType) - Method in interface nxopen.cae.AfuData
-
Sets the extrapolation type
License requirements: None.
- setExtremeFacePointOverridesStationary(boolean) - Method in interface nxopen.features.DraftBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setExtrudeDirection(Direction) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setExtrudeDistance(double) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setExtrudeDraftAngle(double) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setExtrudeFeature(Feature) - Method in interface nxopen.mechatronics.CamBuilder
-
Sets the extrude feature
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setExtrudeHeight(double) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setExtrudeName(String) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setExtrudeSolidBody(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
- setExtrusionGeometryData(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setExtrusionGeometryDataFile(String) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setExtrusionLimit(Plane) - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setExtrusionMaterialSide(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setEyellipse(String) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEyellipsePercentile(MirrorCertificationBuilder.EyellipsePercentileType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEyeMethod(MirrorCertificationBuilder.EyeMethodType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEyePoint(Point) - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEyePoint(Point) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEyePointMethod(MirrorCertificationBuilder.EyePointMethodType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEyePointOffsetType(CloseRangeVisibilityBuilder.EyePointOffsetTypes) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEyePointType(CloseRangeVisibilityBuilder.EyePointTypes) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEyeType(VisionPlaneBuilder.EnumEyeType) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setEyeType(WindshieldDatumBuilder.EnumEyeType) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setF1(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setF1(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setF2(String) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setF2(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setFabricationNumbering(BillOfMaterialBuilder.FabricationNumberingType) - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setFabricationNumberingFlag(RoutingPart.FabricationNumbering) - Method in interface nxopen.preferences.RoutingPart
-
Sets the fabrication numbering for the Routing bill of material.
- setFace(ScCollector) - Method in interface nxopen.features.EmbossProjection
-
Sets the projection face
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFaceAllFacesColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceAnalysis(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setFaceAnalysis(boolean) - Method in interface nxopen.preferences.PartObject
-
Sets the face analysis flag for Solid and Sheets
License requirements: None.
- setFaceAnalysis(Tag, boolean) - Method in interface nxopen.uf.UFObj
-
- setFaceAnalysisMode(boolean) - Method in interface nxopen.DisplayModification
-
Sets the face analysis mode flag.
- setFaceAnalysisViewsType(SelPref.FaceAnalysisViews) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setFaceAndOffset(Face, double, String) - Method in interface nxopen.features.DatumPlaneBuilder
-
Sets one face object and offset
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFaceAttributeColor(NXColor) - Method in interface nxopen.features.ConcaveFacesBuilder
-
Set the color ID for the specified face in tree list
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFaceBlendDefineType(FaceBlendBuilder.DefiningType) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFaceBlendLawRadii(Tag, double[], int) - Method in interface nxopen.uf.UFModlFeatures
-
- setFaceBlendLawRange1Radii(Tag, double[], int) - Method in interface nxopen.uf.UFModlFeatures
-
- setFaceBlendLawRange2Radii(Tag, double[], int) - Method in interface nxopen.uf.UFModlFeatures
-
- setFaceCenter() - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
Sets the reference point to the selected face center.
- setFaceChangeOption(FaceChangeOverflowBehavior.Option) - Method in interface nxopen.geometricutilities.FaceChangeOverflowBehavior
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFaceCollector(ScCollector) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFaceCollector(ScCollector) - Method in interface nxopen.features.sheetmetal.RebendBuilder
-
Sets the unbent faces to rebend
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setFaceCollector(ScCollector) - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
Sets the bend faces
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setFaceCollector(ScCollector) - Method in interface nxopen.geometricutilities.FaceSetOffset
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFaceColor(NXColor) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceColor(int) - Method in interface nxopen.tooling.ManufacturingGeometryBuilder
-
Sets the face color.
- setFaceColor(NXColor) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
License requirements: None.
- setFaceConstraintCollectors(int[], ScCollector[], MeshSurfaceBuilder.ConstraintType[]) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Set faces constraints collectors for through curves and curves mesh types surfaces.
- setFaceConstraintDirection(MeshSurfaceBuilder.ConstraintDirection) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setFaceConstraintTypes(MeshSurfaceBuilder.ConstraintType[]) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Set end constraints types.
- setFaceCrossoverFacesColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceCurveDirectionAdjustment(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setFaceDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFaceDirection(boolean) - Method in interface nxopen.features.PromotionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFaceDirectionOption(BridgeCurveConnectivity.FaceDirectionOptions) - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setFaceDisplay(ViewWorkflowBuilder.Display) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFaceDraftAngleLimit(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceEdgeBlendPreference(DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
- setFaceFillGapDistance(double) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setFaceGapDistance(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setFaceGroupAttributeTitle(String) - Method in interface nxopen.features.ConcaveFacesBuilder
-
Set face group attribute title.
- setFaceGroupAttributeValue(String) - Method in interface nxopen.features.ConcaveFacesBuilder
-
Set face group attribute value.
- setFaceHighlightSelectedFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceId(int) - Method in interface nxopen.cae.PostSelectionEntity
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFaceIndexToEdit(int) - Method in interface nxopen.die.QuickBinderBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFaceInferMethod(WeldBeadBuilder.FaceInferMethodType) - Method in interface nxopen.weld.WeldBeadBuilder
-
License requirements: ugweld ("UG WELD")
.
- setFaceIntegralOption(ResultProbeBuilder.FaceIntegral) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFaceIntegralOptionValue(PostGraphBuilder.FaceIntegralOption) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFaceInterferenceType(SimpleInterference.FaceInterferenceMethod) - Method in interface nxopen.geometricanalysis.SimpleInterference
-
License requirements: None.
- setFaceNegativeFacesColor1(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceNegativeFacesColor2(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceNonSelectedFacesTranslucency(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceNormal(Direction) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setFaceOffsetVector(boolean) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setFaceOption(ExtractFaceBuilder.FaceOptionType) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFacePointsBy(PointSetBuilder.FacePointsType) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFacePositiveFacesColor1(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFacePositiveFacesColor2(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceReflectivityScale(int) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setFaceReverse(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFaceReverseDirection(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFaceReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setFaceReverseDirection(boolean) - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFaceRules(int) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setFaces(CAEFace[]) - Method in interface nxopen.cae.AutoPairs
-
Set the list of
CAEFace
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.0
- setFaces(DisplayableObject[]) - Method in interface nxopen.cam.FeatureTeaching
-
Sets the selected faces
License requirements: fbm_author ("FBM Author")
.
- setFaces(NXObject[]) - Method in interface nxopen.cam.MultiBladeBaseGeometry
-
Set the selection faces
License requirements: cam_base ("CAM BASE")
.
- setFaces(Face[]) - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder
-
The array of input faces that implicitly include all connected sharp thickness edges as input for the break corner.
- setFaces(NXObject[]) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Sets the faces.
- setFaces(Face[]) - Method in interface nxopen.motion.PointOnSurfaceBuilder
-
Set the faces
License requirements: mechanisms ("MECHANISMS")
.
- setFaces(Face[]) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Sets the face occurrences into builder attribute.
- setFaces(Face[]) - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Sets the face occurrences into builder attribute.
- setFaces(Tag, int, Tag[]) - Method in interface nxopen.uf.UFGdt
-
- setFaceSearchOption(MMCCreateBuilder.FaceSearchType) - Method in interface nxopen.cae.MMCCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFaceSelectAllFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSelectCrossoverFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSelectedFacesTranslucency(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSelectNegativeFaces1(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSelectNegativeFaces2(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSelectors(Face[]) - Method in interface nxopen.geometricutilities.RegionTracker
-
The input target or tool faces used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFaceSelectPositiveFaces1(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSelectPositiveFaces2(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSelectUndercutAreas(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSelectUndercutEdges(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSelectVerticalFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceSet(WeldFacesetIndex, DisplayableObject[]) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the user selected faces for the indicated face set
License requirements: ugweld ("UG WELD")
.
- setFacesOnOffsetSheet(Body) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets the offset faces when the object type is body.
- setFaceStock(double) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setFacesToDivide(ScCollector) - Method in interface nxopen.features.DividefaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFacetBeingPainted(FacetedBody) - Method in interface nxopen.facet.PaintBrushBuilder
-
- setFacetBodies(boolean) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setFacetBodyType(STLImportBuilder.FacetBodyTypes) - Method in interface nxopen.facet.STLImportBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setFacetCacheMemoryLevel(DisplayManager.FacetCacheMemoryLevelType) - Method in interface nxopen.DisplayManager
-
License requirements: None.
- setFacetCollector(FacetCollector) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setFacetCollector(FacetCollector) - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setFacetCollector(FacetCollector) - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setFacetCollector(FacetCollector) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setFacetCollector(FacetCollector) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setFacetDensity(double) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFacetedRepresentation(boolean) - Method in interface nxopen.drawings.BaseViewStyle
-
- setFacetedRepresentation(boolean) - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
- setFacetedRepresentation(boolean) - Method in interface nxopen.preferences.BaseViewPreferences
-
- setFaceThicknessList(ObjectList) - Method in interface nxopen.features.ShellBuilder
-
- setFacetImport(DxfdwgImporter.FacetImportAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setFaceTolerance(double) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFaceTolerance(double) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
-
License requirements: None.
- setFaceToMove(Face) - Method in interface nxopen.features.LinearDimensionBuilder
-
The important face that is being moved through the ADM Linear Dimension Feature.
- setFacetQualityOptions(DieEngDefineProductOrientationBuilder.FacetQualityOption) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFaceTranslucency(int) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceTrimMethod(FittingOverstockBuilder.TrimMethod) - Method in interface nxopen.routing.FittingOverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setFacetsQuality(double) - Method in interface nxopen.ModelingViewHighQualityImage
-
Sets the quality of the facets of the High Quality Image.
- setFacetTolerance(double) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFacetTolerance(double) - Method in interface nxopen.sim.SinumerikCaFacetBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setFaceUndercutAreasColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceUndercutEdgesColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFaceVerticalFacesColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setFactorOfSafety(double) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFactoryDefaultTemplate() - Method in interface nxopen.cae.Post
-
Use factory defaults rather than a template for the default postview settings to be used
in all subsequent PostviewCreate calls
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFactoryType(CreateFactoryElementBuilder.TypeAPI) - Method in interface nxopen.linedesigner.CreateFactoryElementBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setFailedElementsColor(NXColor) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFailGroupName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFailureIndex(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFailureIndex(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFailureIndex(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setFailureIndex(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setFailureIndex(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setFailureIndexRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setFailureIndexRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setFailureIndexRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setFailureMode(LaminateGraphicalReportBuilder.FailureModeType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setFailureMode(LaminateSpreadsheetReportBuilder.FailureModeType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setFailureShowIsocline(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFailureValue(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFallOffFactor(double) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setFallOffMethod(TransformCageData.FallOffMethodType) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setFallOffScale(double) - Method in interface nxopen.features.StudioXformBuilder
-
- setFallOffScale(double) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setFalseBody(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFamilyDefaultDirectory(String) - Method in interface nxopen.SaveOptions
-
Sets the option that specifies the directory in which you want to
file part family members.
- setFamilySaveDir(Tag, String) - Method in interface nxopen.uf.UFPart
-
- setFamilyTreatment(UFClone.FamilyTreatment) - Method in interface nxopen.uf.UFClone
-
- setFamInstSaveDir(String) - Method in interface nxopen.uf.UFPart
-
- setFastenerExtentLength(double) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the extent length for the hole in the fastener assembly
License requirements: None.
- setFastenerMode(FastenerAssy.ModeMethod) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the fastener mode
License requirements: None.
- setFastenerSelectionType(FastenerAssy.SelectionTypeMethod) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the selection type for the hole in the fastener assembly
License requirements: None.
- setFastPlacementUtilityBuilder(FastPlacementUtilityBuilder) - Method in interface nxopen.linedesigner.GlobalSelectionBuilder
-
Fast placement utility builder is set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setFastRmsMethod(boolean) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setFatigue(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
The fatigue settings.
- setFatigue(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityEventBuilder
-
The event fatigue settings stored inside the event.
- setFatigueHistoryDataType(DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum) - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFatigueLifeCriterion(DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFatigueSafetyFactor(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFatigueSafetyFactorKeyin(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFatigueSafetyFactorMethod(DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFatigueSafetyFactorOutput(DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorOutputEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFatigueSafetyFactorToggle(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFavoriteIndex(int) - Method in interface nxopen.ColorDefinition
-
License requirements: None.
- setFcfAdditionalTextUnderline(SymbolStyleBuilder.FcfTextUnderlineOption) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Sets the option to underline the additional FCF text
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFcfCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setFcfDrf(Tag, Tag) - Method in interface nxopen.uf.UFGdt
-
- setFcfFrameData(FcfFrameData) - Method in interface nxopen.annotations.IFcf
-
Sets the single FCF frames data.
- setFcfFrameData(FcfFrameData[]) - Method in interface nxopen.annotations.IFcf
-
Sets the multiple FCF frames data.
- setFcfLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setFcfOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setFcfRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setFcfTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setFeatDisplayDesPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatDisplayMeaPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatDisplayReconstruct(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatHighlightNominal(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatTolerance(Tag, double, boolean) - Method in interface nxopen.uf.UFModeling
-
- setFeature(CAMFeature) - Method in interface nxopen.cam.MapFeatureTeaching
-
Sets the selected feature
License requirements: fbm_author ("FBM Author")
.
- setFeature(CAMFeature) - Method in interface nxopen.cam.OperationTeaching
-
Sets the selected feature
License requirements: fbm_author ("FBM Author")
.
- setFeature(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setFeature(Feature) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setFeatureData(CustomFeatureData) - Method in interface nxopen.features.CustomFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFeatureDetail(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatureFilter(InspectionPatternFeatureBuilder.FeatureFilterTypes) - Method in interface nxopen.cam.InspectionPatternFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatureGroupCondition(String, String) - Method in interface nxopen.cam.OperationSetTeaching
-
Sets the feature group conditions
License requirements: fbm_author ("FBM Author")
.
- setFeatureGrouping(FeatureProcessBuilder.FeatureGroupingType) - Method in interface nxopen.cam.FeatureProcessBuilder
-
License requirements: ug_holemaking ("UG Holemaking")
.
- setFeatureGroupPriority(String, double) - Method in interface nxopen.cam.OperationSetTeaching
-
Sets the feature group priority
License requirements: fbm_author ("FBM Author")
.
- setFeatureGroups(FeatureGeometry[]) - Method in interface nxopen.cam.OperationSetTeaching
-
Sets the selected feature groups
License requirements: fbm_author ("FBM Author")
.
- setFeatureGroupType(FeatureGroup.Type) - Method in interface nxopen.features.FeatureGroup
-
Sets the feaure group type.
- setFeatureId(String) - Method in interface nxopen.annotations.FeatureIdBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setFeatureMethods(InspectionGroup[]) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Sets the selected features method
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatureMode(ProfileTransitionBuilder.FeatureModeType) - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setFeatureName(String) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFeatureName(String) - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
License requirements: None.
- setFeatureName(String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setFeatureName(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setFeatureName(Tag, String) - Method in interface nxopen.uf.UFFbmGeom
-
- setFeatureName(UFVariant, String) - Method in interface nxopen.uf.UFMfm
-
- setFeatureNameSuffix(String) - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setFeatureObject(NXObject) - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
License requirements: None.
- setFeatureOffsetDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatureOpName(String) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatureOption(ExtractFaceBuilder.FeatureOptionType) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatureOption(MirrorBodyBuilder.FeatureOptionType) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatureSaveMethod(StudioXformBuilder.FeatureType) - Method in interface nxopen.features.StudioXformBuilder
-
- setFeatureSaveMethod(StudioXformBuilderEx.FeatureType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setFeatureSpine(Section) - Method in interface nxopen.geometricutilities.AlongSpineBuilder
-
Set the spine sent by the owning feaure dynamically into builder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setFeaturesToGroupType(GroupFeatures.FeaturesToGroupTypes) - Method in interface nxopen.cam.GroupFeatures
-
License requirements: cam_base ("CAM BASE")
.
- setFeatureSummary(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatureSuppression(double) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setFeatureToEdit(SubdivisionBody) - Method in interface nxopen.SubdivisionTaskEnvironment
-
Sets the feature to be edited.
- setFeatureType(String) - Method in interface nxopen.cam.MachiningFeature
-
License requirements: cam_base ("CAM BASE")
.
- setFeatureType(SurfaceRegions.FeatureTypes) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setFeatureType(MeshParameterData.FeatureType) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setFeatureTypeEnum(InspectionConstructedFeatureBuilder.ConstFeatType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFeatureTypes(String[]) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Sets the feature types used by the recognizer
License requirements: None.
- setFeatureTypes(String[]) - Method in interface nxopen.cam.GroupFeatures
-
Set the feature types to filter
License requirements: cam_base ("CAM BASE")
.
- setFeed(BoundaryTurnVariableStockSet.FeedType) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
License requirements: cam_base ("CAM BASE")
.
- setFeed(UFVariant, double, UFSim.UnitType, double) - Method in interface nxopen.uf.UFSim
-
- setFeedbackPoint(Point) - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFeedbackPoint(Point) - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFeedbackPoint(Point) - Method in interface nxopen.mechatronics.FixedJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFeedbackPoint(Point) - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFeedCutBuilder(InheritableFeedBuilder) - Method in interface nxopen.cam.DriveChainItemBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFeedDisplayFlag(boolean) - Method in interface nxopen.cam.DisplayPaint
-
License requirements: cam_base ("CAM BASE")
.
- setFeedDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFeEdges(FEElemEdge[]) - Method in interface nxopen.cae.connections.FeEdgesLocation
-
Add location edges.
- setFeedIn(TurnRoughFinishTestCut.FeedInTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setFeedInAngle(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setFeedInLength(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setFeedOnShortMoves(boolean) - Method in interface nxopen.cam.MaxCutTraverse
-
License requirements: cam_base ("CAM BASE")
.
- setFeedOut(TurnRoughFinishTestCut.FeedOutTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setFeedOutAngle(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setFeedOutLength(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setFeedRate(String, double, CAMObject.FeedRateUnit) - Method in interface nxopen.cam.CAMObject
-
Set feed rate value and unit to the parameter index for the object.
- setFeedRate(double) - Method in interface nxopen.cam.MoveBuilder
-
License requirements: None.
- setFeedrate(double, CamPathFeedUnitType) - Method in interface nxopen.cam.PathLinearMotion
-
Set feed rate information.
- setFeedRateColor(String, int) - Method in interface nxopen.cam.CAMObject
-
Set feed rate display color to the parameter index for the object.
- setFeedrateFlag(boolean) - Method in interface nxopen.cam.DriveChainItemBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFeedRateRange(FeedsOptimizationData.FeedRateRangeType) - Method in interface nxopen.cam.FeedsOptimizationData
-
License requirements: cam_base ("CAM BASE")
.
- setFeedType(MoveBuilder.Feed) - Method in interface nxopen.cam.MoveBuilder
-
License requirements: None.
- setFeedUnit(BoundaryMemberSetPlanarMill.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setFeedUnit(BoundaryMillingMemberSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedUnit(BoundaryMillingMemberSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryMillingSet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedUnit(BoundarySetPlanarMill.FeedUnitTypes) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setFeedUnit(BoundaryTurnSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
License requirements: cam_base ("CAM BASE")
.
- setFeedUnit(BoundaryTurnSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryTurnMemberFeed
-
License requirements: cam_base ("CAM BASE")
.
- setFeedUnit(BoundaryTurnSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryTurnSet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedUnit(BoundaryTurnSet.FeedUnitTypes) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedUnit(FeedRateUnit) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedUnit(FeedRateUnit) - Method in interface nxopen.cam.MoveBuilder
-
License requirements: None.
- setFeedUnit(FeedRateUnit) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.BoundaryMillingSet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.BoundaryTurnMemberFeed
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.BoundaryTurnSet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setFeedValue(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setFeetInchFractionForDimensionGreaterThan(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setFemaleDepthType(DrawBeadBuilder.FemaleDepthTypes) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFemaleWidthType(DrawBeadBuilder.FemaleWidthTypes) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFemAsWork() - Method in interface nxopen.cae.FemPart
-
Sets the fem as work, if associated cad is the current work.
- setFemGeometrySaveOption(boolean) - Method in interface nxopen.cae.responsesimulation.RSEventOutputSetting
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setFemValidInPost(boolean) - Method in interface nxopen.cae.SimSolution
-
Specify whether NX Post should group entities based on
node and element groups and meshes in the pre-processing model
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFH1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFH1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFH1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFH1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFH2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFH2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFH2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFH2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFiberDistance(double) - Method in interface nxopen.cae.LaminateLayupOffsetBuilder
-
- setField(FieldWrapper) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setField(Field) - Method in interface nxopen.fields.ComplexScalarFieldWrapper
-
Sets the implementation of the wrapper to the specified field
License requirements: None.
- setField(Field, double) - Method in interface nxopen.fields.ComplexVectorFieldWrapper
-
Sets the implementation of the wrapper to the specified field
License requirements: None.
- setField(Field) - Method in interface nxopen.fields.FieldWrapper
-
Sets the implementation of the wrapper to the specified field
License requirements: None.
- setField(Field, double) - Method in interface nxopen.fields.ScalarFieldWrapper
-
Sets the implementation of the wrapper to the specified field
License requirements: None.
- setField(Field, double[]) - Method in interface nxopen.fields.VectorFieldWrapper
-
Sets the implementation of the wrapper to the specified field
License requirements: None.
- setField(Field) - Method in interface nxopen.motion.FieldData
-
License requirements: None.
- setFieldExpressionString(String, boolean) - Method in interface nxopen.fields.FieldExpression
-
Sets the new expression string to the expression field
License requirements: None.
- setFieldFind(int) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFieldFindUsing(String) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFieldMatchUsing(String) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFieldMatchWith(int) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFieldName(String) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
Set field Name to be created
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFieldName(String) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
Set field Name to be created
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFieldName(String) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set field Name to be created
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFieldOfViewAngle(double) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setFieldOfViewMeasured(CameraBuilder.FovMeasured) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setFieldQuantity(DisplayPropertiesBuilder.FieldQuantityType) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setFields(Field[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set fields to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFieldWeld(LineWeldBuilder.FieldWeldType) - Method in interface nxopen.annotations.LineWeldBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setFieldWeld(boolean) - Method in interface nxopen.annotations.LineWeldData
-
Sets the flag indicating whether the weld is done at the field site
License requirements: None.
- setFieldWeld(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setFieldWeld(boolean) - Method in interface nxopen.weld.GrooveBuilder
-
- setFieldWeld(boolean) - Method in interface nxopen.weld.PlugSlotBuilder
-
License requirements: None.
- setFieldWithScaleFactor(Field, double) - Method in interface nxopen.fields.ComplexScalarFieldWrapper
-
Sets the implementation of the wrapper to the specified field and scale factor
License requirements: None.
- setFieldWrapperPropertyValue(String, FieldWrapper) - Method in interface nxopen.BasePropertyTable
-
Sets the field wrapper
FieldWrapper
License requirements: None.
- setFile(String, String) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the value for the given property name.
- setFile(String) - Method in interface nxopen.cae.LayoutStateApplicator
-
Sets the exported layout state that will be applied.
- setFile(String) - Method in interface nxopen.cae.PostProcessingSessionApplicator
-
Sets the exported post processing pession that will be applied.
- setFile(String) - Method in interface nxopen.facet.STLImportBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setFile(String) - Method in interface nxopen.gateway.ImageCaptureBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFile(String, String) - Method in interface nxopen.PropertyContainer
-
Sets the value for the given property name.
- setFileBrowser(String) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setFileBrowser(String) - Method in interface nxopen.features.BodyByEquationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFileBrowser(String) - Method in interface nxopen.features.MapleBuilder
-
- setFileBrowser(String) - Method in interface nxopen.features.MathIntegrationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFileBrowser(String) - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setFileExportStatus(boolean) - Method in interface nxopen.uf.UFUgmgr
-
- setFileFormat(SaveImageFileBrowserBuilder.FileFormats) - Method in interface nxopen.display.SaveImageFileBrowserBuilder
-
License requirements: None.
- setFileFormat(STLImporter.FileFormatType) - Method in interface nxopen.STLImporter
-
Sets the file format.
- setFileName(String) - Method in interface nxopen.cae.AfuData
-
Sets the name of AFU file
License requirements: None.
- setFilename(String) - Method in interface nxopen.cae.FlatPatternsBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setFileName(String) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setFilename(String) - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setFilename(String) - Method in interface nxopen.display.CgfxAttributeValueFileBuilder
-
- setFileName(String) - Method in interface nxopen.features.subdivision.ExportSubdivisionGeometryBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setFileName(String) - Method in interface nxopen.features.subdivision.ImportSubdivisionGeometryBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setFileName(String) - Method in interface nxopen.fields.ExportData
-
Set file name
License requirements: None.
- setFileName(String) - Method in interface nxopen.fields.ImportData
-
Set file name
License requirements: None.
- setFileName(String) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setFileName(String) - Method in interface nxopen.geometricutilities.PointsFromFileBuilder
-
License requirements: None.
- setFileName(String) - Method in interface nxopen.Importer
-
Sets the name of the file containing the data to import.
- setFileName(String) - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setFileName(String) - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setFileName(String) - Method in interface nxopen.openxml.ImageDocumentData
-
Sets the file name of the image data
License requirements: None.
- setFilename(String) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setFilename(String) - Method in interface nxopen.routing.WatertightFittingsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setFileName(String) - Method in interface nxopen.sim.ArchiveImportBuilder
-
License requirements: None.
- setFileName(String) - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setFileName(String) - Method in interface nxopen.validate.PartNode
-
License requirements: None.
- setFilename(String) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setFilenameOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setFilenames(String[]) - Method in interface nxopen.CGMBuilder
-
Sets all the CGM filenames.
- setFilenames(String[]) - Method in interface nxopen.PlotBuilder
-
Sets all the temporary CGM filenames to be plotted.
- setFileNewContext(NXObject) - Method in interface nxopen.cae.CaeSession
-
Sets the context part for use in naming new FEM, Sim, and Idealized parts in managed mode.
- setFileOpenFlag(boolean) - Method in interface nxopen.AcisImporter
-
License requirements: None.
- setFileOpenFlag(boolean) - Method in interface nxopen.Catiav4Importer
-
License requirements: None.
- setFileOpenFlag(boolean) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setFileOpenFlag(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setFileOpenFlag(boolean) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setFileOpenFlag(boolean) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setFileOpenFlag(boolean) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setFileOpenFlag(boolean) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setFilePath(String) - Method in interface nxopen.ame.ImportEClassMappingBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFilePath(String) - Method in interface nxopen.cae.AlternateFemRepresentationSourceBuilder
-
Sets the file path
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFilePath(String) - Method in interface nxopen.cae.connections.ComponentData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFilePicker(String) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFileReferencePropertyValue(String, String) - Method in interface nxopen.BasePropertyTable
-
Sets the file reference value of the property
License requirements: None.
- setFileSaveFlag(boolean) - Method in interface nxopen.AcisExporter
-
License requirements: None.
- setFileSaveFlag(boolean) - Method in interface nxopen.Catiav4Creator
-
License requirements: None.
- setFileSaveFlag(boolean) - Method in interface nxopen.Catiav5Creator
-
License requirements: None.
- setFileSaveFlag(boolean) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setFileSaveFlag(boolean) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setFileSaveFlag(boolean) - Method in interface nxopen.Step203Creator
-
- setFileSaveFlag(boolean) - Method in interface nxopen.Step214Creator
-
- setFileSaveFlag(boolean) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setFileSpecification(String) - Method in interface nxopen.markup.File
-
License requirements: None.
- setFileSpecificationOfPartToPlace(String) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Sets the file specification of the part to place
License requirements: routing_base ("Routing Basic")
.
- setFileSpecificationOfSpaceReservationToPlace(String) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Sets the file specification of the space reservation part to place
License requirements: routing_base ("Routing Basic")
.
- setFileSpecificationOfStockToPlace(String) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Sets the file specification of the stock part to place
License requirements: routing_base ("Routing Basic")
.
- setFilesToProcess(String[]) - Method in interface nxopen.annotations.ImportSymbolBuilder
-
Sets the names of the selected files
License requirements: nx_layout ("NX Layout")
.
- setFileTceName(String) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFileToImport(String) - Method in interface nxopen.ame.ImportEClassProductBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFileToImport(String) - Method in interface nxopen.ame.ImportEClassSchemaBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFileToImport(String) - Method in interface nxopen.ame.ImportGlobalMappingBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFileToImport(String) - Method in interface nxopen.ame.TransferFileDataBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFileType(LaminateImportedLayupBuilder.FileEnum) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setFileUnits(STLImporter.FileUnitsType) - Method in interface nxopen.STLImporter
-
Sets the file units.
- setFileUnits(VRMLImporter.FileUnitsType) - Method in interface nxopen.VRMLImporter
-
Sets the file units.
- setFileWritable(String, boolean) - Method in interface nxopen.RemoteUtilities
-
Sets a file's permissions to be writable by the NX session.
- setFillArea(boolean) - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
License requirements: None.
- setFillClientData(StandardPartData) - Method in interface nxopen.tooling.MoldFillingBuilder
-
Sets standard part client data.
- setFillColor(NXColor) - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
License requirements: None.
- setFillColor(NXColor) - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
License requirements: None.
- setFillColor(NXColor, double) - Method in interface nxopen.diagramming.tables.TableBuilder
-
The method to set the fill color.
- setFilled(boolean) - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
-
License requirements: None.
- setFilletAxialElementSizeOption(MeshControlBuilder.FilletAxialElementSizeType) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setFilletCircumNumberElements(int) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setFilletCircumSizeOption(MeshControlBuilder.FilletCircumferenceSizeType) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setFilletColor(int) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setFilletDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFilletDirectionVector(Direction) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFilletFont(DisplayableObject.ObjectFont) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setFilletLengths(JointExitBuilder.FilletSizes) - Method in interface nxopen.weld.JointExitBuilder
-
Sets the fillet weld values for the side of the welding joint.
- setFilletMethod(MeshControlBuilder.FilletType) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setFilletOption(AOCSBuilder.FilletOptions) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFilletRadius(double) - Method in interface nxopen.cae.CrossSectionParameters
-
Turns on the fillets flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFilletRadius(Expression) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFilletRadius(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
- setFilletradscale(double) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFillets(boolean) - Method in interface nxopen.cae.CrossSectionParameters
-
Turns on the fillets flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFilletSectionCorners(boolean) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Sets the Rounding Option for section Corners which contain Non Fillet Radii
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setFilletSectionCorners(boolean) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Sets the Rounding Option for section Corners which contain Non Fillet Radii
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setFilletType(FilletBuilder.EnumWeldingType) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setFilletWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setFillFaceHoles(FilletBuilder.EnumFillFaceHolesType) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setFillForAddendum(boolean) - Method in interface nxopen.die.FillBuilder
-
Sets the fill for addendum setting of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFillHolesOption(boolean) - Method in interface nxopen.cae.Shell2SolidBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFillingCoefficient(double) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setFillingColor(NXColor) - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
License requirements: None.
- setFillingColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting
-
License requirements: None.
- setFillingColor(NXColor) - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting
-
- setFillingColor(NXColor) - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
-
License requirements: None.
- setFillingColor(NXColor) - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
-
License requirements: None.
- setFillName(String) - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setFillOpacity(double) - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
License requirements: None.
- setFillOpacity(double) - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
License requirements: None.
- setFillOptions(PatternFill.PatternFillOptions) - Method in interface nxopen.geometricutilities.PatternFill
-
License requirements: None.
- setFillPathLength(GeomcopyBuilder.AlongPathDistanceOptions) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFillShape(Body[]) - Method in interface nxopen.die.FillBuilder
-
Sets the fill shape of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFilter(PinListBuilder.FilterType) - Method in interface nxopen.annotations.PinListBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setFilter(String) - Method in interface nxopen.blockstyler.FileSelection
-
License requirements: None.
- setFilter(CompDrawingBuilder.FilterSelection) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFilter(ConnectionFinderBuilder.FilterTypes) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
License requirements: ugweld ("UG WELD")
.
- setFilterBlankingAttribute(String) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the Rlist_Filter_Blanking_Attribute.
- setFilterBlankingPlugin(CustomManager.FilterBlankingPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin called by Routing to determine if a segment or component needs to be blanked.
- setFilterCondition(Condition) - Method in interface nxopen.visualreporting.Rule
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setFilterConditionOfRule(Rule, Condition) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setFilteredPlacementSolutions(PlacementSolution[]) - Method in interface nxopen.placement.PlacementEngineBuilder
-
Sets the input PlacementSolutions as the filtered solutions on the PlacementEngineBuilder in the given order.
- setFilterEnum(InspectionGraphicalReportBuilder.GraphicalReportFilter) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFilterFormatFileName(String) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the file name for the stand alone XML filters and formats file.
- setFilterNavigator(boolean) - Method in interface nxopen.assemblies.ConstraintDisplayBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setFilterOptionValue(DesignRuleViolationViewer.FilterOption) - Method in interface nxopen.routing.DesignRuleViolationViewer
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setFilterPaths(Path[]) - Method in interface nxopen.routing.ManualRouteBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setFilterString(String) - Method in interface nxopen.routing.CompareRunsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setFilterType(LaminateSpreadsheetReportBuilder.FilteringType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setFilterType(StockBrowserBuilder.TypeFilter) - Method in interface nxopen.routing.StockBrowserBuilder
-
Sets the stock type filter which defines the type of stock
License requirements: routing_base ("Routing Basic")
.
- setFinalRetractType(CenterlineDrillTurningBuilder.FinalRetractTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: None.
- setFinalStock(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setFinalType(NcmHoleMachining.FinalTypes) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setFinalType(NcmPlanarBuilder.FinalTypes) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFinalType(NcmTransferTypes.FinalTypes) - Method in interface nxopen.cam.NcmTransferTypes
-
License requirements: cam_base ("CAM BASE")
.
- setFind(String) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFindAllRoots(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFindApparentIntersections(boolean) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFindIn(DurSpecialistSuperpositionEventBuilder.FindInType) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFindScopeOption(int) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setFinePrecision(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setFinish(DraftingSurfaceFinishBuilder.FinishType) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFinish(SurfaceFinishBuilder.FinishType) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setFinishAtSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setFinishMethod(FinishMethod) - Method in interface nxopen.annotations.LineWeldSideData
-
Sets the weld finish method
License requirements: None.
- setFinishMethod(FinishMethod) - Method in interface nxopen.weld.JointExitBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setFinishOperation(boolean) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the finish operation of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFinishOperation(boolean) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the finish operation switch of the form task, if true the form task is a finish operation, if false it is not.
- setFinishOperation(boolean) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the finish operation of the pierce task
True indicates the pierce is to be a finish pierce.
- setFinishOperation(boolean) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the finish operation of the trim task
True indicates the trim is to be a finish trim.
- setFinishOperation(boolean) - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFinishOperation(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFinishPasses(CutParametersFinishPassesTypes) - Method in interface nxopen.cam.TurnCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setFinishPasses(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFinishSymbol(LineWeldDataBuilder.FinishSymbolType) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setFirstArrowheadCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the first arrowhead color, font, and width
License requirements: None.
- setFirstArrowheadColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstArrowheadFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstArrowheadWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstArrowLineCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the first arrow line color, font, and width
License requirements: None.
- setFirstArrowLineColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstArrowLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstArrowLineWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstArrowType(ArrowheadType) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the first arrow type
License requirements: None.
- setFirstArrowType(ArrowheadType) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstAssociativity(Associativity) - Method in interface nxopen.annotations.Dimension
-
Sets the first associativity data.
- setFirstAssociativityVectorFlipped(boolean) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
First associativity vector flipped
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setFirstAssociativityVectorFlipped(boolean) - Method in interface nxopen.annotations.BaseRapidDimensionBuilder
-
First associativity vector flipped
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setFirstBody(DisplayableObject) - Method in interface nxopen.mechatronics.ChangeMaterialBuilder
-
Sets the first object.
- setFirstBody(DisplayableObject) - Method in interface nxopen.mechatronics.PreventCollisionBuilder
-
Sets the first object.
- setFirstBoundingObjectEndOption(TrimCurveBuilder.FirstBoundingObjectEndOptions) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFirstBoundingObjectOption(TrimCurveBuilder.FirstBoundingObjectOptions) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFirstBoundingObjectPickPoint(Point3d) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFirstBoundingPlane(Plane) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFirstBranchID(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setFirstChainInstallDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setFirstClearance(double) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFirstCompartment(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setFirstConstraintCurveCollector(ScCollector) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstConveyingSurfaceCroner(Point) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setFirstCsys(CoordinateSystem) - Method in interface nxopen.motion.JointDefine
-
Sets the CSYS of first link
License requirements: mechanisms ("MECHANISMS")
.
- setFirstCurve(NXObject) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFirstCurve(Curve) - Method in interface nxopen.features.GeodesicChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstCurve(Curve) - Method in interface nxopen.features.GeodesicFilletBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstCurveStock(double) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFirstCurveToolPosition(TeachmodeLinearMoveBuilder.CurveToolPositionTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFirstCut(int) - Method in interface nxopen.cam.DmStreamlineCutStep
-
License requirements: cam_base ("CAM BASE")
.
- setFirstCut(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setFirstCutMode(Cycle.CutMode) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setFirstCuttingEdge(double) - Method in interface nxopen.cam.TurnCutterClearance
-
License requirements: cam_base ("CAM BASE")
.
- setFirstCutValue(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setFirstDefinitionPoint(Point3d) - Method in interface nxopen.annotations.Associativity
-
Sets the first definition point.
- setFirstDistance(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
- setFirstDriverJointLowerLimit(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFirstDriverJointSteps(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFirstDriverJointUpperLimit(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFirstEdgeContinuityReversed(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstEdgeLimitEndToEnd(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstEdgeReversed(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstElementSplitType(int) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFirstEndPoint(Point) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setFirstExtensionLineCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the first extension line color, font, and width
License requirements: None.
- setFirstExtensionLineColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstExtensionLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstExtensionLineWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstFaceCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstFaceset(ScCollector) - Method in interface nxopen.weld.GrooveBuilder
-
- setFirstFacesetBottomEdges(Section) - Method in interface nxopen.weld.GrooveBuilder
-
- setFirstFacesetEndAdjacentFaces(Face[]) - Method in interface nxopen.weld.GrooveBuilder
-
- setFirstFacesetHelpPoint(Point3d) - Method in interface nxopen.weld.GrooveBuilder
-
- setFirstFacesetNormalReversed(boolean) - Method in interface nxopen.weld.GrooveBuilder
-
- setFirstFacesetStartAdjacentFaces(Face[]) - Method in interface nxopen.weld.GrooveBuilder
-
- setFirstFacesetTopEdges(Section) - Method in interface nxopen.weld.GrooveBuilder
-
- setFirstGeometryMaterialDirection(CurveContactBuilder.GeometryMaterialSide) - Method in interface nxopen.motion.CurveContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFirstGeometryMaxFacetSizeFactorFlag(boolean) - Method in interface nxopen.motion.BodyContactRecurdyn
-
License requirements: mechanisms ("MECHANISMS")
.
- setFirstJogAngle(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstJogDisplay(boolean) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstJogEndOffset(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstJogOrientation(JogOrientation) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstJogStartOffset(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstLength(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setFirstLimitPoint(Point3d) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the first limit point.
- setFirstLinearDistance(double) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setFirstLink(Link) - Method in interface nxopen.motion.JointDefine
-
Sets the first link object
License requirements: mechanisms ("MECHANISMS")
.
- setFirstMapView(View) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFirstMargin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFirstMarginOffset(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the first margin offset
License requirements: None.
- setFirstMatrix(NXMatrix) - Method in interface nxopen.motion.JointDefine
-
Sets the matrix of first link
License requirements: mechanisms ("MECHANISMS")
.
- setFirstObject(NXObject) - Method in interface nxopen.annotations.Associativity
-
Sets the first associativity object
License requirements: None.
- setFirstObjectFilter(CollisionPairBuilder.Filter) - Method in interface nxopen.cam.CollisionPairBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFirstObjectName(String) - Method in interface nxopen.cam.CollisionPairBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFirstObjectType(AssociativeAngleBuilder.ObjectType) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFirstOffset(String) - Method in interface nxopen.features.ChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstOffset(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
- setFirstOffsetOption(ConicCrossSection.OffsetMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstOrientationType(JointDefine.OrientationType) - Method in interface nxopen.motion.JointDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setFirstOrigin(Point) - Method in interface nxopen.motion.JointDefine
-
Sets the origin of first link
License requirements: mechanisms ("MECHANISMS")
.
- setFirstPlane(Plane) - Method in interface nxopen.features.IntersectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstPlane(Plane) - Method in interface nxopen.routing.FittingOverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setFirstPlungeOnly(boolean) - Method in interface nxopen.cam.ChipControl
-
License requirements: cam_base ("CAM BASE")
.
- setFirstPoint(double) - Method in interface nxopen.features.GeodesicChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstPoint(double) - Method in interface nxopen.features.GeodesicFilletBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstPosToExtensionLineDistance(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFirstPosToExtLineDist(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the first position to extension line distance
License requirements: None.
- setFirstPtSelect(Point) - Method in interface nxopen.cae.FaceFromBoundaryBuilder
-
License requirements: None.
- setFirstRadius(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFirstSection(Section) - Method in interface nxopen.features.GeodesicChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstSection(Section) - Method in interface nxopen.features.GeodesicFilletBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFirstSection(Section) - Method in interface nxopen.features.RuledBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setFirstSection(Section) - Method in interface nxopen.weld.WeldPointBuilder
-
The commit for first section
License requirements: ugweld ("UG WELD")
.
- setFirstSegment(ISegment) - Method in interface nxopen.routing.DiscontinuityCorner
-
Sets the first segment of a discontinuity corner, segment must be
attached to the
ControlPoint
that
defines this corner.
- setFirstSuperElementIncrement(int) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFirstType(GcouplerMovementTypes) - Method in interface nxopen.motion.GeneralCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFirstVector(Direction) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFirstVector(Direction) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFirstVector(Direction) - Method in interface nxopen.motion.JointDefine
-
Sets the direction of first link
License requirements: mechanisms ("MECHANISMS")
.
- setFirstVectorForBunnyEar(Direction) - Method in interface nxopen.tooling.CornerDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFirstVectorView(View) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFit(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Sets fit for hole series.
- setFitCharSizes(Tag, int, int, double, double) - Method in interface nxopen.uf.UFPlist
-
- setFitConstraints(BestFitAlignBuilder.ConstraintOptions) - Method in interface nxopen.facet.BestFitAlignBuilder
-
Sets the fit constraint
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setFitDirection(Direction) - Method in interface nxopen.features.RefitFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFitFaceStatus(boolean) - Method in interface nxopen.tooling.StockSizeBuilder
-
Find out those extreme planar faces, and set fitting face status in all directions.
- setFitMethod(CurveFitData.Method) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setFitMethod(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setFitMethods(TableCellStyleBuilder.FitMethodType[]) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Set fit methods
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFitOption(CurveFitOptions.FitMethod) - Method in interface nxopen.geometricutilities.CurveFitOptions
-
Sets the curve fit method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFitOption(String) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFitOption(String) - Method in interface nxopen.geometricutilities.MiddleHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFitOption(String) - Method in interface nxopen.geometricutilities.StartHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFitPercentage(int) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Sets the fit percentage.
- setFitRules(Tag, int[]) - Method in interface nxopen.uf.UFPlist
-
- setFittingParameters(FitCurveBuilder.FittingParametersOptions) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFittingPoint(Point) - Method in interface nxopen.tooling.ChannelFittingBuilder
-
License requirements: None.
- setFitToleranceParentheses(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFitToleranceSeparator(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFitToSectionClipPlanes(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Sets the option to specify whether, when sectioning is enabled for a view, the bounds computed
by a Fit operation should be limited by the sectioning clipping planes.
- setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFixAtCurrentTimestamp(boolean) - Method in interface nxopen.features.WavePointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFixAtTimestamp(boolean) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Sets the setting which decides whether the flattened solid will be fixed at timestamp.
- setFixAtTimestamp(boolean) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Sets the setting decides whether the flattened solid will be fixed at timestamp.
- setFixed(boolean) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
License requirements: None.
- setFixed(boolean) - Method in interface nxopen.geometricutilities.Continuity
-
License requirements: None.
- setFixed(boolean) - Method in interface nxopen.motion.LinkBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFixedCsys(NXObject) - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFixedCsys(CoordinateSystem) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setFixedCurvesContinuity(FtmFixedCurvesBuilder.FixedCurvesContinuityType) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilder
-
License requirements: None.
- setFixedDatumAxis(DatumAxisBuilder.FixedType) - Method in interface nxopen.features.DatumAxisBuilder
-
Sets type of fixed datum axis
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setFixedDatumPlane(DatumPlaneBuilder.FixedType) - Method in interface nxopen.features.DatumPlaneBuilder
-
Sets type of fixed datum plane.
- setFixedDirection(boolean) - Method in interface nxopen.mechatronics.BreakingConstraintBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFixedLimits(double, double) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
Sets the fixed limits
License requirements: None.
- setFixedLocationPercentage(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFixedSide(BendBuilder.FixedSideOptions) - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Sets the Fixed Side
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setFixedSide(JogBuilder.FixedSideOptions) - Method in interface nxopen.features.sheetmetal.JogBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setFixedSizeDatum(boolean) - Method in interface nxopen.features.DatumCsysBuilder
-
- setFixedStringOption(StyledSweepBuilder.FixedStringOptions) - Method in interface nxopen.features.StyledSweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setFixedTextSize(double) - Method in interface nxopen.preferences.SessionSketch
-
Sets the dimension text size when the text size fixed flag is set.
- setFixedTextSize(double) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the fixed text size.
- setFixedVector(SmartObject) - Method in interface nxopen.cam.PmopToolAxisCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFixedVector(SmartObject) - Method in interface nxopen.cam.PreprocessGeometryBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFixHint(boolean) - Method in interface nxopen.positioning.ConstraintReference
-
Set a hint to the solver to fix the movable object associated
with this constraint reference.
- setFixHintForUpdate(boolean) - Method in interface nxopen.positioning.ConstraintReference
-
Set a hint to the solver to fix the movable object associated
with this constraint reference.
- setFixingInterface(String) - Method in interface nxopen.ame.Snap3DModelsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFixingPlacementLocation(Point3d) - Method in interface nxopen.ame.SelectMountingInterfaceLocationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFixingType(MountingInterfaceBuilder.FixingPolicy) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFixOffplaneSketchCurves(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to fix off-plane sketch curves.
- setFixSurfaceNodes(boolean) - Method in interface nxopen.cae.optimization.TBSMeshSmooth
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setFixTabFlangePosition(boolean) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFixtures(boolean) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setFlagOfUsingContainer(boolean) - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFlagOfUsingSpecifiedMCF(boolean) - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFlangeBendProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RotorBuilder
-
Sets the flange bend profile of the rotor casting.
- setFlangeCheckHeight(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Flange Check Height
License requirements: ugweld ("UG WELD")
.
- setFlangeCheckRadius(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Flange Check Radius
License requirements: ugweld ("UG WELD")
.
- setFlangeDirection(Direction) - Method in interface nxopen.die.DieAssistantFlangeProfile
-
License requirements: None.
- setFlangeDirection(boolean) - Method in interface nxopen.routing.WatertightFittingsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setFlangeEndProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the flange end profile of the steel insert
License requirements: ug_die_design ("Die Design")
.
- setFlangeFactor(int) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setFlangeOffset(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setFlangeProcFactor(Tag, double) - Method in interface nxopen.uf.UFModlSmd
-
- setFlangeProfileDirection(DirectionOption) - Method in interface nxopen.die.DieAssistantFlangeProfile
-
License requirements: None.
- setFlangeSearchTolerance1(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlangeSearchTolerance2(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlangeSide(boolean) - Method in interface nxopen.die.DieAssistantFlangeProfile
-
License requirements: None.
- setFlangeType(DieAssistantFlangeProfileType) - Method in interface nxopen.die.DieAssistantFlangeProfile
-
License requirements: None.
- setFlangeType1(String) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlangeType2(String) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlangeWallAttributes(String, String, int) - Method in interface nxopen.die.RotorSectionBuilder
-
Sets the flange wall faces attributes
License requirements: ug_die_design ("Die Design")
.
- setFlangeWallAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Sets the flange wall attributes
License requirements: ug_die_design ("Die Design")
.
- setFlatnessTolerance(double) - Method in interface nxopen.geometricanalysis.DupinBuilder
-
License requirements: None.
- setFlatOvalDimensions(double, double) - Method in interface nxopen.routing.PathStockBuilder
-
Set the FlatOval height and width value for the FlatOval space reservation assignment
License requirements: routing_base ("Routing Basic")
.
- setFlatPatternCalloutOrientationType(PartFlexiblePrintedCircuitDesign.FlatPatternCalloutOrientationType) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the orientation type for flat pattern callouts.
- setFlatPatternCalloutOrientationType(PartSheetmetal.FlatPatternCalloutOrientationType) - Method in interface nxopen.preferences.PartSheetmetal
-
Sets the orientation type for flat pattern callouts.
- setFlatPatternCalloutTypeContents(String, String[]) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the contents for a callout type.
- setFlatPatternCalloutTypeContents(String, String[]) - Method in interface nxopen.preferences.PartSheetmetal
-
Sets the contents for a callout type.
- setFlatPatternCalloutTypeDisplay(String, PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the display data for a callout type.
- setFlatPatternCalloutTypeDisplay(String, PartSheetmetal.FlatPatternCalloutTypeDisplay) - Method in interface nxopen.preferences.PartSheetmetal
-
Sets the display data for a callout type.
- setFlatPatternCalloutTypeDisplay(String, FlatPatternSettings.FlatPatternCalloutTypeDisplay) - Method in interface nxopen.sheetmetal.FlatPatternSettings
-
Sets the display data for a callout type.
- setFlatPatternCompensation(boolean) - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setFlatPatternCompensationAtEnd(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setFlatPatternCompensationAtStart(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setFlatPatternObjectTypeDisplay(boolean, PartFlexiblePrintedCircuitDesign.FlatPatternObjectType, PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the display data for a flat pattern object type.
- setFlatPatternObjectTypeDisplay(boolean, PartSheetmetal.FlatPatternObjectType, PartSheetmetal.FlatPatternObjectTypeDisplay) - Method in interface nxopen.preferences.PartSheetmetal
-
Sets the display data for a flat pattern object type.
- setFlatPatternObjectTypeDisplay(FlatPatternSettings.FlatPatternObjectType, FlatPatternSettings.FlatPatternObjectTypeDisplay) - Method in interface nxopen.sheetmetal.FlatPatternSettings
-
Sets the display data for a flat pattern object type.
- setFlattenAssembly(boolean) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setFlattenAssembly(boolean) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setFlattenAssembly(boolean) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setFlattenAssembly(boolean) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setFlattenAssembly(boolean) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setFlattenAssembly(boolean) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setFlattenHierarchy(boolean) - Method in interface nxopen.annotations.CutSheetBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setFlattenHierarchy(boolean) - Method in interface nxopen.annotations.PinListBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setFlatteningConstant(FlatteningBuilder.FlatteningConstantType) - Method in interface nxopen.FlatteningBuilder
-
- setFlexibleCableBottomFaceColor(NXColor) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the bottom face color.
- setFlexibleCableBottomFaceColor(NXColor) - Method in interface nxopen.preferences.PartSheetmetal
-
THE bottom face color.
- setFlexibleCableConductorSpacing(String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the conductor spacing value string.
- setFlexibleCableConductorWidth(String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the conductor width value string.
- setFlexibleCableContactFace(PartFlexiblePrintedCircuitDesign.FlexibleCableContactFaceOptions) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the contact face.
- setFlexibleCableStrippingLength(String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the stripping length value string.
- setFlexibleCableTopFaceColor(NXColor) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the top face color.
- setFlexibleCableTopFaceColor(NXColor) - Method in interface nxopen.preferences.PartSheetmetal
-
THE top face color.
- setFlexibleLink(FlexBody) - Method in interface nxopen.motion.LoadTransferControl
-
Sets flexible link
License requirements: mechanisms ("MECHANISMS")
.
- setFlip(boolean) - Method in interface nxopen.blockstyler.ReverseDirection
-
License requirements: None.
- setFlip(boolean) - Method in interface nxopen.geometricutilities.CircularPattern
-
License requirements: None.
- setFlip(boolean) - Method in interface nxopen.geometricutilities.HorizontalReference
-
License requirements: None.
- setFlip(boolean) - Method in interface nxopen.geometricutilities.PolygonPattern
-
License requirements: None.
- setFlip(boolean) - Method in interface nxopen.IPlane
-
Flip the direction of the plane
License requirements: None.
- setFlipBaseNormalDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFlipBaseUDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFlipBaseVDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFlipChamferOffsets(boolean) - Method in interface nxopen.features.ResizeChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFlipControlNormalDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFlipControlUDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFlipControlVDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFlipDiagonals(boolean) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlipDirection(boolean) - Method in interface nxopen.annotations.LineWeldBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setFlipDirection(boolean) - Method in interface nxopen.cae.DependentMeshListItemBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlipDirection(boolean) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelection
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlipDirection(boolean) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelection
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlipDirection(boolean) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setFlipDirection(boolean) - Method in interface nxopen.features.EmbossTarget
-
Sets the flip flag for translation direction
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFlipDirection(AeroFlangeBuilder.DirType, boolean) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Set flip direction.
- setFlipDirection(boolean) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setFlipDirection(boolean) - Method in interface nxopen.weld.JointmarkPointsBuilder
-
License requirements: ugweld ("UG WELD")
.
- setFlipDirectionOption(boolean) - Method in interface nxopen.cae.Mesh1dBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlipGunDirection(boolean) - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Sets the flip gun direction
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setFlipHorizontal(boolean) - Method in interface nxopen.annotations.LineWeldBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setFlipHorizontal(boolean) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setFlipJoggleSide(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setFlipNormals(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setFlipped(boolean) - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder
-
License requirements: None.
- setFlippedStatus(Flip) - Method in interface nxopen.routing.Stock
-
Sets whether or not the profile is flipped.
- setFlipState(int) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Sets the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlipState(int) - Method in interface nxopen.cae.ElementProjectBuilder
-
Sets the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlipState(int) - Method in interface nxopen.cae.ElementTranslateBuilder
-
Sets the flip state from the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlipState(int) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFlipStock(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
Sets the stock flip flag
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setFlipStock(boolean) - Method in interface nxopen.routing.StockBuilder
-
Sets the stock flip flag
License requirements: routing_base ("Routing Basic")
.
- setFlipTargetCurveOrientation(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setFlipToolAroundHolder(boolean) - Method in interface nxopen.cam.TurningOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFlipToolAroundHolder(boolean) - Method in interface nxopen.cam.TurnToolProbingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFlipTrimDirection(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFlipVertical(boolean) - Method in interface nxopen.annotations.LineWeldBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setFlipVertical(boolean) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setFlipViewDirection(boolean) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setFloat3Value(double[]) - Method in interface nxopen.display.CgfxAttributeValueFloat3Builder
-
- setFloat4Value(double[]) - Method in interface nxopen.display.CgfxAttributeValueFloat4Builder
-
- setFloor(boolean) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFloorFaces(ScCollector) - Method in interface nxopen.cam.ManualFeatureBuilder
-
License requirements: None.
- setFloorFaces(ScCollector) - Method in interface nxopen.features.AnalyzePocketBuilder
-
License requirements: None.
- setFloorFaces(ScCollector) - Method in interface nxopen.features.BlendPocketBuilder
-
License requirements: None.
- setFloorOrientationType(Stage.OrientationType) - Method in interface nxopen.display.Stage
-
License requirements: None.
- setFloorPlane(Plane) - Method in interface nxopen.cam.GeometryCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFloorSameAsPartStock(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setFloorStock(double) - Method in interface nxopen.cam.CutVolume
-
License requirements: cam_base ("CAM BASE")
.
- setFlow(boolean) - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFlowArrowParameterA(double) - Method in interface nxopen.preferences.RoutingLogical
-
Sets the application view flow arrow parameter A
License requirements: routing_pid ("Routing PID")
.
- setFlowArrowParameterB(double) - Method in interface nxopen.preferences.RoutingLogical
-
Sets the application view flow arrow parameter B
License requirements: routing_pid ("Routing PID")
.
- setFlowArrowType(RoutingLogical.FlowArrowEnumType) - Method in interface nxopen.preferences.RoutingLogical
-
Sets the application view flow arrow type
License requirements: routing_pid ("Routing PID")
.
- setFlowCurveCount(int) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFlowCutDirection(FlowCutSteepContainment.CutDirectionTypes) - Method in interface nxopen.cam.FlowCutSteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setFlowDirection(Vector3d) - Method in interface nxopen.die.LineupBuilder
-
Sets the flow direction of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFlowDirection(NSidedSurfaceBuilder.FlowDirectionType) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setFlowDirection(Port.FlowDirectionType) - Method in interface nxopen.routing.Port
-
Set the flow direction value of
Port
License requirements: routing_base ("Routing Basic")
Created in NX5.0.0
- setFlowDirectionType(FlowDirection.Type) - Method in interface nxopen.geometricutilities.FlowDirection
-
License requirements: nx_freeform_1 ("basic freeform modeling")
.
- setFlowEdit(FlowBuilder.FlowEditTypes) - Method in interface nxopen.cam.FlowBuilder
-
License requirements: None.
- setFlowIsActive(boolean) - Method in interface nxopen.cam.CycleCoolant
-
License requirements: cam_base ("CAM BASE")
.
- setFlowMode(CycleCoolant.Flow) - Method in interface nxopen.cam.CycleCoolant
-
License requirements: cam_base ("CAM BASE")
.
- setFlowOffsetMode(FlowBuilder.FlowOffsetModeType) - Method in interface nxopen.cam.FlowBuilder
-
License requirements: None.
- setFlowType(SplitDuctBuilder.FlowTypes) - Method in interface nxopen.routing.SplitDuctBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setFocalDistance(double) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setFocalLength(double) - Method in interface nxopen.Parabola
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setFocus() - Method in interface nxopen.uistyler.IntegerItem
-
Sets focus
License requirements: None.
- setFocus() - Method in interface nxopen.uistyler.MultiTextBox
-
Indicates that this dialog item is receiving keyboard focus.
- setFocus() - Method in interface nxopen.uistyler.PropertyPage
-
Sets focus
License requirements: None.
- setFocus() - Method in interface nxopen.uistyler.PushButton
-
Indicates that this dialog item is receiving keyboard focus.
- setFocus() - Method in interface nxopen.uistyler.RealItem
-
Sets focus
License requirements: None.
- setFocus() - Method in interface nxopen.uistyler.SelectionBox
-
Indicates that this dialog item is receiving keyboard focus.
- setFocus() - Method in interface nxopen.uistyler.SingleSelectList
-
Indicates that this dialog item is receiving keyboard focus.
- setFocus() - Method in interface nxopen.uistyler.StringItem
-
Indicates that this dialog item is receiving keyboard focus
License requirements: None.
- setFocus() - Method in interface nxopen.uistyler.TabControl
-
Sets focus
License requirements: None.
- setFocus() - Method in interface nxopen.uistyler.Toggle
-
Indicates that this dialog item is receiving keyboard focus.
- setFocus() - Method in interface nxopen.uistyler.WideString
-
Indicates that this dialog item is receiving keyboard focus.
- setFogBackgroundColor(boolean) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Sets the use background color flag.
- setFogBackValue(int) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Sets the fog back scale value.
- setFogColorHLSValue(ViewVisualizationSpecialEffects.ColorHLS) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Sets the value of HLS color pattern
License requirements: None.
- setFogColorHSVValue(ViewVisualizationSpecialEffects.ColorHSV) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Sets the value of HSV color pattern
License requirements: None.
- setFogColorRGBValue(ViewVisualizationSpecialEffects.ColorRGB) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Sets the value of RGB color pattern
License requirements: None.
- setFogFrontValue(int) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Sets the fog front scale value.
- setFogOptions(Tag) - Method in interface nxopen.uf.UFView
-
- setFogRateValue(int) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Sets the fog rate value.
- setFogSetting(ViewVisualizationSpecialEffects.FogType) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Sets the fog setting type
License requirements: None.
- setFogSettingOption(boolean) - Method in interface nxopen.preferences.ViewVisualizationSpecialEffects
-
Sets the fog option.
- setFoldedEdges(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setFoldedRadius(boolean) - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Sets the is folded radius
License requirements: drafting ("DRAFTING")
.
- setFoldedRadiusAngle(double) - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Sets the interior angle for folded radius type dimension
License requirements: None.
- setFoldedRadiusAngle(double) - Method in interface nxopen.annotations.RadialStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFoldedToggle(boolean) - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFolder(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setFolder(boolean) - Method in interface nxopen.layout2d.PublishComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setFolder(PMNavFolderObject) - Method in interface nxopen.mechatronics.SignalMappingBuilder
-
Sets folder in which the newly created connections will be stored.
- setFolderBrowser(String) - Method in interface nxopen.tooling.FlowDisplayBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setFolderName(String) - Method in interface nxopen.annotations.PartSymbolFolderBuilder
-
Sets folder name provided current folder is not root folder
License requirements: drafting ("DRAFTING")
.
- setFolderName(String) - Method in interface nxopen.cae.CaeNoteBuilder
-
Sets folder name into the builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFolderName(String) - Method in interface nxopen.layout2d.LocalDefinitionFolderBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setFolderName(String) - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setFolderName(String) - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setFolderPath(String) - Method in interface nxopen.ame.ExportEClassMappingBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFoldTransitionType(int) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setFollowCheck(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setFollowCurve(ISegment, Curve) - Method in interface nxopen.routing.SegmentManager
-
Set segment follow curve.
- setFollowFaceProjDirOption(PatternOrientation.ProjDirEnum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFollowFaceToggle(boolean) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFollowFillet(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setFollowFillet(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setFollowFoot(boolean) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setFollowNonVerticalWalls(boolean) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
License requirements: None.
- setFollowWallBottom(boolean) - Method in interface nxopen.cam.DmCmBuilder
-
License requirements: None.
- setFont(EditSymbolDisplayBuilder.FontTypes) - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFont(DisplayableObject.ObjectFont) - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting
-
License requirements: None.
- setFont(DisplayableObject.ObjectFont) - Method in interface nxopen.cae.xyplot.ICurveDisplaySettings
-
License requirements: None.
- setFont(String) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setFont(SectionLineStyleBuilder.FontStyle) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setFont(String, ShipbuildingLinesViewStyle.Lines, Font) - Method in interface nxopen.drawings.ShipbuildingLinesViewStyle
-
The font type of ship line.
- setFont(String, ShipDraftingViewLinesViewStyle.Lines, Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesViewStyle
-
The font type of ship line.
- setFont(Font) - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFont(Font) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFont(Font) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFont(Font) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFont(PartObject.LineFontType) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setFont(PartDrafting.FontType) - Method in interface nxopen.preferences.PartDrafting
-
Sets the line font of the retained
Annotation
objects
License requirements: None.
- setFont(String, ShipbuildingLinesViewPreferences.Lines, Font) - Method in interface nxopen.preferences.ShipbuildingLinesViewPreferences
-
The font type of ship line.
- setFont(String, ShipDraftingViewLinesViewPreferences.Lines, Font) - Method in interface nxopen.preferences.ShipDraftingViewLinesViewPreferences
-
The font type of ship line.
- setFont(Tag, int) - Method in interface nxopen.uf.UFObj
-
- setFontFace(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setFontScaling(boolean) - Method in interface nxopen.cae.PostAnnotationPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFontSize(int) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setFontStyle(VisualizationFonts.StyleType) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setFontStyle(String) - Method in interface nxopen.display.TransientText
-
Sets the style of font to be used to display the transient text.
- setFontStyle(TextBuilder.FontStyleOptions) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFontType(Fonttype) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setFontValue(String) - Method in interface nxopen.blockstyler.TextColorFontWidth
-
License requirements: None.
- setFootDataSae(HumanData.SideType, String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the pedal Sae data of foot data, the steering wheel pedal type should be set as Sae
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setForce(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setForceCalculation(BushingDefine.ForceCalculationOption) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setForceColor(NXColor) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
Force Color
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setForcedDirection(Direction) - Method in interface nxopen.features.SweptVolumeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setForcedWelcomeMode(int) - Method in interface nxopen.preferences.SessionDrafting
-
License requirements: None.
- setForceFitDistance(boolean) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setForceModel(BodyContactLms.ForceModelType) - Method in interface nxopen.motion.BodyContactLms
-
License requirements: None.
- setForceModelType(BodyContactAdams.ForceModel) - Method in interface nxopen.motion.BodyContactAdams
-
License requirements: mechanisms ("MECHANISMS")
.
- setForceModelType(BodyContactRecurdyn.ForceModel) - Method in interface nxopen.motion.BodyContactRecurdyn
-
License requirements: mechanisms ("MECHANISMS")
.
- setForceRegenerate(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setForceStrength(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal")
.
- setForceType(NodalForceReportBuilder.Force) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setForceUnlockFlag() - Method in interface nxopen.uf.UFUi
-
- setForceVectorDisplay(FreeBodyResultsBuilder.VectorDisplay) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
Force vector display
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setForEachScrapDiePlateThree(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setForEachScrapDiePlateTwo(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setForeground(boolean) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets the status of foreground
License requirements: drafting ("DRAFTING")
.
- setForeground(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setForeground(boolean) - Method in interface nxopen.preferences.SectionViewPreferences
-
Sets the status of foreground
License requirements: drafting ("DRAFTING")
.
- setForegroundColor(int) - Method in interface nxopen.blockstyler.Node
-
License requirements: None.
- setForegroundColor(double[]) - Method in interface nxopen.display.ImageBaseBuilder
-
Sets the foreground color (RGB value) of the image.
- setForElecCam(boolean) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
- setForElecCam(boolean) - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setForeOffset(BeamSectionOffsetOptions.Offset) - Method in interface nxopen.cae.BeamSectionOffsetOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setForePlane(Plane) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForeshorteningSymbolMethodType(ForeshorteningSymbolSettingsBuilder.MethodType) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setForeshorteningSymbolType(ForeshorteningSymbolSettingsBuilder.SymbolType) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setForm(ChamferForm) - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Sets the form
License requirements: None.
- setForm(HoleBossGeom.FormTypes, String) - Method in interface nxopen.cam.HoleBossGeom
-
The Form types.
- setForm(SteelDistributionBuilder.SaForm) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setForm(TagFormObject) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder
-
- setForm(TagFormObject) - Method in interface nxopen.mechatronics.TagTableBuilder
-
- setForm(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Sets form for hole series.
- setFormabilityStrainType(LsdynaFormAnalysisResultDisplayBuilder.FormabilityStrainTypeName) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFormAndPitch(HoleBossGeom.FormPitchTypes) - Method in interface nxopen.cam.HoleBossGeom
-
License requirements: cam_base ("CAM BASE")
.
- setFormat(TableCellStyleBuilder.FormatType) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
- setFormat(NumberFormat.FormatOption) - Method in interface nxopen.cae.NumberFormat
-
License requirements: None.
- setFormat(Post.Format) - Method in interface nxopen.cae.PostAnnotationPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFormat(Post.Format) - Method in interface nxopen.cae.PostIdentifyPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFormat(Post.Format) - Method in interface nxopen.cae.PostLegendPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFormat(Post.Format) - Method in interface nxopen.cae.PostResultNavigatorPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFormat(ImageCaptureBuilder.ImageFormat) - Method in interface nxopen.gateway.ImageCaptureBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFormat(ModelingViewHighQualityImage.FormatType) - Method in interface nxopen.ModelingViewHighQualityImage
-
Sets the format to use for the generation of the High Quality Image.
- setFormatMesh(boolean) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFormatOption(NodeElementInfoBuilder.FormatType) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFormatOption(TBSSmoothBuilder.Format[]) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
The output result format mutator
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setFormatType(String) - Method in interface nxopen.cae.SimLoadRecipeSource
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFormatType(ElectricalFormat.Type) - Method in interface nxopen.routing.electrical.ElectricalFormat
-
Sets the type of
ElectricalFormat
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX5.0.1
- setFormatValue(NXObject[], String[], String) - Method in interface nxopen.diagramming.FormattedStringBuilder
-
Sets the format and related referenced attributes to this builder.
- setFormatValue(NXObject[], NXObject[], String[], String) - Method in interface nxopen.diagramming.FormattedStringBuilder
-
Sets the format and related referenced attributes to this builder in managed mode.
- setFormboardFrameSizes(String[]) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets a formboard frame size.
- setFormboardSynchronizationLengthTolerance(double) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the default segment length tolerance to use for Formboard Synchronization.
- setFormFaces(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroUnformBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setFormingAttributes(String, String, int) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Sets the forming faces attributes.
- setFormingAttributes(String, String, int) - Method in interface nxopen.die.RotorSectionBuilder
-
Sets the forming faces attributes
License requirements: ug_die_design ("Die Design")
.
- setFormingAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Sets the forming faces attributes
License requirements: ug_die_design ("Die Design")
.
- setFormingColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setFormingRegion(NXObject[]) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Set forming region.
- setFormName(String) - Method in interface nxopen.cam.DrillThreadMillToolBuilder
-
License requirements: None.
- setFormOption(EndHoleData.FormOptions) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFormSheetSizeOption(FormSheetBuilder.SizeOption) - Method in interface nxopen.ame.FormSheetBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFormSheetStandardMetricSize(FormSheetBuilder.StandardMetricSize) - Method in interface nxopen.ame.FormSheetBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFormStandard(ThreadFeatureGeometry.Form) - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry
-
License requirements: cam_base ("CAM BASE")
.
- setFormula(String) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setFormula(String) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setFormula(String) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setFormula(String) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setFormula(String) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setFormula(String) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFormula(String) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
The formula
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFormula(String) - Method in interface nxopen.cae.ResultsReductionBuilder
-
The formula
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFormula(String) - Method in interface nxopen.cae.TransientResultsReductionBuilder
-
The formula
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFormula(int, int, SpreadsheetCellData, int) - Method in interface nxopen.Spreadsheet
-
Stores a formula into a cell.
- setFormula(String) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setFormula(String) - Method in interface nxopen.validate.RequirementCheck
-
Sets the formula of requirement check.
- setFormulaComment(String) - Method in interface nxopen.mechatronics.AdapterFormulaBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFormulaComment(String) - Method in interface nxopen.mechatronics.ExpressionBlockFormulaBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFormulaName(String) - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFormulaString(String) - Method in interface nxopen.mechatronics.RuntimeFormulaBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFormulation(RSEvent.DdamFormulationType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setFormulaValue(String) - Method in interface nxopen.SpreadsheetCellData
-
License requirements: None.
- setFormUserDefined(String) - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry
-
Set the user defined form standard
License requirements: cam_base ("CAM BASE")
.
- setForwardExtension(Expression) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setForwardExtension(double) - Method in interface nxopen.routing.IAxisPort
-
Sets the forward extension value of a port, i.e. the minimum length that
a segment must remain straight coming out of a
Port
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- setForwardExtensionObject(Expression) - Method in interface nxopen.routing.IAxisPort
-
Sets the forward extension object of a port, i.e. an expression representing the minimum
length that a segment must remain straight coming out of a
Port
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- setForwardPerpendicular(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForwardPerpendicularLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForwardPerpendicularLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForwardPerpendicularLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForwardPerpendicularLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForwardPerpendicularTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForwardPerpendicularTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForwardPerpendicularTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForwardPerpendicularTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setForwardPerpendicularTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setFourthMargin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFpPrefs(UFSmd.FpPrefs) - Method in interface nxopen.uf.UFSmd
-
- setFractionalDisplay(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
License requirements: None.
- setFractionalDisplay(boolean) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setFragmentBoundingBoxAnchorPoint(FragmentObject, double, double) - Method in interface nxopen.ame.DiagramManager
-
Creating or Updating fragment Sheet Bounding Box in Template
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFragmentDescription(String) - Method in interface nxopen.ame.FragmentBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFragmentLocation(Point2d) - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFragmentName(String) - Method in interface nxopen.ame.FragmentBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFramebarHorizontal(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
The status of framebar horizontal, if true automatically creates
horizontal framebar for views where the view axis match with
ship axis.
- setFramebarHorizontal(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFramebarHorizontal(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of horizontal framebar.
- setFrameBarPrecision(int) - Method in interface nxopen.preferences.PartDrafting
-
Sets the frame bar precision.
- setFramebarPreferences(FrameBarPreferences) - Method in interface nxopen.annotations.BaseFrameBar
-
Sets the symbol preferences for the annotation
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setFrameBarPreferences(FrameBarPreferences) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the global frame bar preferences for the part
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setFrameBarTicDirection(int) - Method in interface nxopen.preferences.PartDrafting
-
Sets the frame bar tic direction.
- setFramebarVertical(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
The status of framebar vertical, if true automatically creates
vertical framebar for views where the view axis match with
ship axis.
- setFramebarVertical(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFramebarVertical(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of vertical framebar.
- setFrameData(FcfFrameData) - Method in interface nxopen.annotations.FcfData
-
Sets the FCF frames data.
- setFrameName(String) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setFrameName(String) - Method in interface nxopen.routing.FormboardFrame
-
Sets the name of the formboard frame
License requirements: routing_harness ("Routing Harness")
.
- setFrameOnlyToggle(boolean) - Method in interface nxopen.geometricutilities.PatternDefinition
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFrameParts(int) - Method in interface nxopen.features.shipdesign.MaterialEstimationBuilder
-
Sets the selected frame parts.
- setFrameParts(String[]) - Method in interface nxopen.features.shipdesign.SelectPartBuilder
-
Set frame part names.
- setFrameParts(String[]) - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
Set frame part names.
- setFrameParts(int) - Method in interface nxopen.features.shipdesign.WeightAndCGBuilder
-
Sets the selected frame parts.
- setFrames(FcfFrame[]) - Method in interface nxopen.annotations.FcfFrameData
-
- setFramesPerSecond(int) - Method in interface nxopen.MovieSettingsBuilder
-
License requirements: None.
- setFrameStyle(FeatureControlFrameBuilder.FcfFrameStyle) - Method in interface nxopen.annotations.FeatureControlFrameBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setFrameStyleType(SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setFrameType(PackagingInterferenceBuilder.Frame) - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
- setFrameType(PackagingTraceBuilder.Frame) - Method in interface nxopen.motion.PackagingTraceBuilder
-
- setFrecAtTimeStamp(Feature) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFrecAtTimeStamp(Feature) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFrecAtTimeStamp(Feature) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFrecAtTimeStamp(Feature) - Method in interface nxopen.features.WavePointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFree2DOption(boolean) - Method in interface nxopen.features.FreeTransformerBuilder
-
License requirements: None.
- setFree2DPlane(Plane) - Method in interface nxopen.features.FreeTransformerBuilder
-
License requirements: None.
- setFreeEdgeDisplayStyle(ElementEdgeCheckBuilder.EdgeDisplayStyle) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setFreeFaceIndicator(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFreeFaceIndicator(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFreeFormConstructionResult(SessionModeling.FreeFormConstructionResultType) - Method in interface nxopen.preferences.SessionModeling
-
Sets the free form construction result.
- setFreeFormResult(int) - Method in interface nxopen.uf.UFModlFeatures
-
- setFreePoints(Point3d[]) - Method in interface nxopen.cae.PostGraphBuilder
-
Set free points for extracting data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFreePoints(Point3d[]) - Method in interface nxopen.cae.PostGraphOrbitBuilder
-
Set free points for extracting data
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setFreeState(boolean) - Method in interface nxopen.annotations.DatumReferenceBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setFreeState(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setFreeStateType(SearchCriteriaFeatureControlFrameBuilder.FreeStateOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setFreeTextOfLegendItem(int, String) - Method in interface nxopen.cae.xyplot.LegendTable
-
Sets the free text of legend table item
License requirements: None.
- setFreezeOption(boolean) - Method in interface nxopen.cae.AssyFEModel
-
Sets freeze option
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setFrenetSubtype(PlaneTypes.FrenetSubtype) - Method in interface nxopen.IPlane
-
Sets subtype for a specific plane type where the alternate solution cannot handle.
- setFreqTargetActive(int, boolean) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets active status for a specific frequency target
License requirements: nx_correl_update ("FE Model Update")
.
- setFreqTargetWeight(int, double) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets weight for a specific frequency target
License requirements: nx_correl_update ("FE Model Update")
.
- setFrequencies(double) - Method in interface nxopen.cae.ModelUpdateOverallWeightsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setFrequencies(double[]) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
Sets the frequency values to perform FRF evaluation.
- setFrequencyBandSummationBandType(FrequencyBandSummationBandType) - Method in interface nxopen.cae.xyplot.GraphOptionsStyle2D
-
License requirements: None.
- setFrequencyTolerance(double) - Method in interface nxopen.cae.CorrelModePairingBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setFrfDampingSource(CorrelSolutionBuilder.EnumDampingFrftype) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setFrfStatus(int, FrfSet.NodeComponent, int, FrfSet.NodeComponent, FrfSet.Measure, FrfSet.Measure, boolean) - Method in interface nxopen.cae.FrfSet
-
Modify the status of a frf.
- setFriction(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setFrictionCoefficientCurve(MotionFunction) - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFrictionCoefficientOption(AnalyticalContactPropertyBuilder.FrictionCoefficientType) - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFrictionFunction(MotionFunction) - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setFrictionSurfaceFile(String) - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setFrictionType(TirePropertyAdvancedParameters.FrictType) - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setFrom(BladeCutStart.Type) - Method in interface nxopen.cam.BladeCutStart
-
License requirements: cam_base ("CAM BASE")
.
- setFrom(ISurface) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the face or datum plane from which the cutout begins.
- setFromCsys(CoordinateSystem) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.
- setFromCsys(CoordinateSystem) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFromCSYS(CoordinateSystem) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFromFunction(Excitation, Excitation.Component) - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder
-
Sets the from function
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setFromLocationCsys3d(CoordinateSystem) - Method in interface nxopen.geometricutilities.GeneralPattern
-
License requirements: None.
- setFromLocationPoint(Point) - Method in interface nxopen.geometricutilities.GeneralPattern
-
License requirements: None.
- setFromLocationType(GeneralPattern.FromLocationOptions) - Method in interface nxopen.geometricutilities.GeneralPattern
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFromPoint(Point) - Method in interface nxopen.cam.TurnAvoidanceFromBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFromPoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFromPoint(Point) - Method in interface nxopen.features.MoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFromPoint(Point) - Method in interface nxopen.formboard.OrientBranchBuilder
-
- setFromPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFromPoint(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFromPointMode(TurnAvoidanceFromBuilder.FromPointModes) - Method in interface nxopen.cam.TurnAvoidanceFromBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFromPointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFromPointToolAxis(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setFromStation(StripLayoutBuilder.FromStationType) - Method in interface nxopen.tooling.StripLayoutBuilder
-
License requirements: None.
- setFromTerminal(LogicalTerminal) - Method in interface nxopen.routing.electrical.Connection
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setFromVector(Direction) - Method in interface nxopen.features.MoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setFromVector(Direction) - Method in interface nxopen.formboard.OrientBranchBuilder
-
- setFromVector(Direction) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setFromView(View) - Method in interface nxopen.drawings.ViewProjectionBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setFrontClip(boolean) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFrontClipDistance(double) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFrontClipping(boolean) - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Sets the status of front clipping
License requirements: drafting ("DRAFTING")
.
- setFrontClippingDistance(double) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setFrontClippingDistance(double) - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Sets the value of front clipping distance
License requirements: drafting ("DRAFTING")
.
- setFrontCrossPosition(CrashBarrierBuilder.CrossPositionType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontHeaderFeature(HeadImpactFrontHeader) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontLoading(String) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontLoading(String) - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontLoading(String) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontOverhang(double) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- setFrontOverlapSide(CrashBarrierBuilder.OverlapSideType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontPositionObject(CrashBarrierBuilder.PositionObjectType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontProximity(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setFrontShape(CrashBarrierBuilder.ShapeType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontSurfacePlane(WheelCoveringBuilder.SurfacePlaneType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontSurfaceSection(WheelCoveringBuilder.SurfaceSectionType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontUserDefineWidth(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setFrontView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setFrozenColor(NXColor) - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setFrozenLevel(Tag, int) - Method in interface nxopen.uf.UFPlist
-
- setFrozenRegionDefinitionMethod(DefineWorkRegionBuilder.FrozenRegionDefinitionMethods) - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setFtireFile(String) - Method in interface nxopen.motion.TirePropertyFtBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFulfillment(String) - Method in interface nxopen.pid.EquipmentBuilder
-
Sets the fulfillment data of the symbol.
- setFullCircle(boolean) - Method in interface nxopen.annotations.CircleCenterlineBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setFullCircle(boolean) - Method in interface nxopen.geometricutilities.CurveLimitsData
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setFullnessPoint(Point) - Method in interface nxopen.features.FillHoleBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.
- setFullPath(String) - Method in interface nxopen.ame.TiaProjectItemBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFullSceneAntialiasing(boolean) - Method in interface nxopen.preferences.SessionVisualizationVisual
-
Sets the scene antialiasing flag.
- setFullyDefinedColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch fully defined constraint color
License requirements: None.
- setFunction(String) - Method in interface nxopen.ame.AspectPrefixBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFunction(boolean) - Method in interface nxopen.ame.DefineAspectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFunction(TaggedObject) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setFunction(TaggedObject) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- setFunction(Function) - Method in interface nxopen.cae.responsesimulation.FunctionComponentData
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setFunction(String) - Method in interface nxopen.geometricutilities.LawBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setFunction(NXObject) - Method in interface nxopen.motion.DriverOperation
-
License requirements: mechanisms ("MECHANISMS")
.
- setFunction(MotionFunction) - Method in interface nxopen.motion.ExpressionFunctionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFunction(Function) - Method in interface nxopen.motion.PlantOutputBuilder
-
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- setFunction(Function) - Method in interface nxopen.motion.ScalarForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFunction(Function) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setFunction(Tag, UFMotion.Function) - Method in interface nxopen.uf.UFMotion
-
- setFunctionAspect(boolean) - Method in interface nxopen.ame.ReportsSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFunctionData(TaggedObject, int, double, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Sets the function data.
- setFunctionDataType(XyFunctionDataType) - Method in interface nxopen.cae.AfuData
-
Sets the data type of the AFU Data Record
License requirements: None.
- setFunctionDesignation(boolean) - Method in interface nxopen.ame.DefineAspectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFunctionIdentifierOrder(String[]) - Method in interface nxopen.ame.EplanStructureIdentifierOrderBuilder
-
The structure order index for function
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setFunctionItemRevisionId(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
- setFunctionName(String) - Method in interface nxopen.report.ProgramInformation
-
License requirements: None.
- setFunctionOptionSet(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setFunctionType(String) - Method in interface nxopen.routing.AttributeHolder
-
Sets the function type for which Template Attributes to be applied
License requirements: routing_base ("Routing Basic")
.
- setG0(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setG0(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG0Check(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG0Check2(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG0Continuity(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setG0Tolerance(double) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setG0Tolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setG0Tolerance(double) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setG0Tolerance(double) - Method in interface nxopen.features.StyledSweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setG0Tolerance(double) - Method in interface nxopen.features.SweptBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setG0Tolerance(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG0Tolerance(double) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG1(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setG1(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG1Check(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG1Check2(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG1Continuity(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setG1Tolerance(double) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setG1Tolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setG1Tolerance(double) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setG1Tolerance(double) - Method in interface nxopen.features.StyledSweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setG1Tolerance(double) - Method in interface nxopen.features.SweptBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setG1Tolerance(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG1Tolerance(double) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG2(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setG2(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG2Check(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG2Check2(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG2Continuity(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setG2Tolerance(double) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setG2Tolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setG2Tolerance(double) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setG2Tolerance(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG2Tolerance(double) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG3(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setG3(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG3Check(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG3Check2(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG3Continuity(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setG3Tolerance(double) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setG3Tolerance(double) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setGageConstruction(DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setGagePoissonRatio(double) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setGageSource(DurabilityStrainGageAnalyzerBuilder.GageSourceEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setGageType(DurabilityStrainGageAnalyzerBuilder.GageTypeEnum) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setGageType(StrainGageType) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setGaOptNumGenerations(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setGaOptNumGenes(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setGaOptNumIndividuals(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setGap(double) - Method in interface nxopen.annotations.CenterlineSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setGap(double) - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setGap(double) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setGap(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setGapData(FEElement, PhysicalPropertyTable, CaeElementAssociatedDataUtilsOrientationMethod, Direction, CoordinateSystem, FENode) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets gap element associated data.
- setGapFirst(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setGapLock(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setGapOption(boolean) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setGapSecond(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setGapSize(double) - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Sets the gap size
License requirements: drafting ("DRAFTING")
.
- setGapSize(double) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setGapSize(double) - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Sets the gap size.
- setGapThicknessState(ShellEADBuilder.State) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGapTolerance(double) - Method in interface nxopen.cae.ContactMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGapTolerance(String) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setGarb(HumanPosturePredictionBuilder.GarbType) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setGauge(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Sets the gauge of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setGdt(GdtOption) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
License requirements: drafting ("DRAFTING")
.
- setGdt(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
License requirements: drafting ("DRAFTING")
.
- setGdtFrameHeightFactor(double) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the gdt frame height factor
License requirements: None.
- setGdtFrameHeightFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGdtSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the gdt symbol color, font, and width
License requirements: None.
- setGdtSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGdtSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGdtSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGender(HumanData.GenderType) - Method in interface nxopen.features.HumanBuilder
-
Sets human gender data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setGender(HumanHandsDialogBuilder.GenderType) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setGeneralBushing(Tag, UFMotion.GeneralBushing) - Method in interface nxopen.uf.UFMotion
-
- setGeneralColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGeneralDrawingPlane(Plane) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setGeneralHoleForm(HolePackageBuilder.HoleForms) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setGeneralName(String) - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
License requirements: None.
- setGeneralNxTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralObject(NXObject) - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
License requirements: None.
- setGeneralOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setGeneralPrefs(UFSmd.GenPrefs) - Method in interface nxopen.uf.UFSmd
-
- setGeneralStandardTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralText(Lettering) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the general text
License requirements: None.
- setGeneralTextAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralTextCharSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralTextColor(NXColor) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralTextFont(int) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralTextItalicized(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralTextLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralTextLineWidth(LineWidth) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralTextSymbolAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setGeneralValue(double) - Method in interface nxopen.cae.AfuZHeaderInfo
-
Sets the value of general field
License requirements: None.
- setGenerateBdf(boolean) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGenerateCheckFlag(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setGenerateDensityCsv(boolean) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGenerateHeightCurve(boolean) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setGenerateHqiShadows(boolean) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setGenerateLogFile(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setGenerateMaximumContributors(boolean) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setGenerateMethod(WorkpieceBuilder.MethodType) - Method in interface nxopen.tooling.WorkpieceBuilder
-
License requirements: None.
- setGenerateMissingPartFamilyMembers(boolean) - Method in interface nxopen.LoadOptions
-
Sets the option that controls whether to automatically regenerate missing part
family members when it loads the parent assembly
License requirements: None.
- setGenerateOneModel(boolean) - Method in interface nxopen.VRMLImporter
-
Sets the Generate One Model flag.
- setGenerateOptimizeToggle(boolean) - Method in interface nxopen.tooling.DieEngStampingCarryoverBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setGenerateOriginalToggle(boolean) - Method in interface nxopen.tooling.DieEngStampingCarryoverBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setGenerateOutline(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setGeneratePaths(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setGenerateStl(boolean) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGenerateToProjectToggle(boolean) - Method in interface nxopen.ame.GenerateReportsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setGenerateToSystemToggle(boolean) - Method in interface nxopen.ame.GenerateReportsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setGenerateType(GeneralInsertBuilder.GenerateMethod) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setGenerateValidationLogFile(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGenerateWeightData(boolean) - Method in interface nxopen.PartSaveOptions
-
Sets the option indicating whether the weight and other mass properties
of a part will be updated and saved when the part is saved
License requirements: None.
- setGenerationFullRegeneration(boolean) - Method in interface nxopen.cam.Preferences
-
- setGenerationPauseAfterEachPath(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setGenerationRefreshBeforeEachPath(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setGenerationSmartRegeneration(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setGenerationUpdateInstances(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setGenericResultType(BaseResultType) - Method in interface nxopen.cae.CrossSectionParameters
-
Set Result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setGenericResultType(BaseResultType) - Method in interface nxopen.cae.ResultParameters
-
Set Result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setGenericType(BaseResultType) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setGeoFileName(String) - Method in interface nxopen.linedesigner.ImportFactoryCadGeoBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setGeomDisplayFreeEdges(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeomDisplayStitchedEdges(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeometricCharacteristic(GeometricCharacteristic) - Method in interface nxopen.annotations.FcfFrameData
-
- setGeometricDefinition(Tag, UFGdt.GeometricDefinition) - Method in interface nxopen.uf.UFGdt
-
- setGeometries(NXObject[]) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Sets geometry elements for the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setGeometry(DisplayableObject[]) - Method in interface nxopen.annotations.MasterCustomSymbolData
-
- setGeometry(DisplayableObject[]) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
Sets the target geometry
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGeometry(DisplayableObject[]) - Method in interface nxopen.cae.optimization.DAOObjective
-
Sets the target geometry
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGeometry(Section) - Method in interface nxopen.cam.FollowCurveMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGeometry(DisplayableObject) - Method in interface nxopen.DatumConstraint
-
Sets
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setGeometry(NXObject[]) - Method in interface nxopen.IPlane
-
Sets the geometry
License requirements: None.
- setGeometry(NXObject[]) - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
Sets the geometry
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setGeometry(NXObject[]) - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
Sets the geometries.
- setGeometry(NXObject[]) - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
Sets the geometry
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setGeometryAndConstraints(DisplayableObject, DatumAxisBuilder.ConstraintType, int, double, String, DisplayableObject, DatumAxisBuilder.ConstraintType, int, double, String, Sense) - Method in interface nxopen.features.DatumAxisBuilder
-
Sets two different geometric objects.
- setGeometryAndConstraints(DisplayableObject, DatumPlaneBuilder.ConstraintType, int, double, String, DisplayableObject, DatumPlaneBuilder.ConstraintType, int, double, String) - Method in interface nxopen.features.DatumPlaneBuilder
-
Sets two different geometric objects.
- setGeometryAverageValue(ResultProbeBuilder.GeometryValue) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGeometryAxisX(String) - Method in interface nxopen.sim.KinematicChannelBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setGeometryAxisY(String) - Method in interface nxopen.sim.KinematicChannelBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setGeometryAxisZ(String) - Method in interface nxopen.sim.KinematicChannelBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setGeometryCombinationValue(PostGraphBuilder.GeometryValue) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setGeometryData(FemPart.UseBodiesOption, Body[], FemSynchronizeOptions) - Method in interface nxopen.cae.FemPart
-
Sets the geometry data associated with the fem part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGeometryDirectionReversed(boolean) - Method in interface nxopen.positioning.ConstraintReference
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setGeometryGroup(InspectionGroup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setGeometryGroup(NCGroup) - Method in interface nxopen.cam.MirrorBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGeometryHighlight(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setGeometryLocation(String) - Method in interface nxopen.cam.FeatureProcessBuilder
-
Returns the name of the geometry location of the generated feature processes
License requirements: ug_holemaking ("UG Holemaking")
.
- setGeometryLocation(String) - Method in interface nxopen.cam.GroupFeatures
-
License requirements: cam_base ("CAM BASE")
.
- setGeometryOptions(FemCreationOptions.UseBodiesOption, Body[], FemSynchronizeOptions) - Method in interface nxopen.cae.FemCreationOptions
-
Set CAE geometry options
License requirements: None.
- setGeometryPreference(BaseCustomSymbolBuilder.GeometryPreferences) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setGeometrySearchType(FeatureRecognitionBuilder.GeometrySearch) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
License requirements: None.
- setGeometrySelection(TaggedObject, TaggedObject[]) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the the geometry selected for manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeometryTemplate(String) - Method in interface nxopen.drafting.PrimaryContentItemBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setGeometryType(Geometry) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGeometryType(Geometry) - Method in interface nxopen.cae.optimization.DAOObjective
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGeometryType(ProbeCalibrateSphereMoveBuilder.Geometry) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGeometryType(ProbeCalibrateStylusMoveBuilder.Geometry) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setGeometryType(ProbeInspectBorebossMoveBuilder.Geometry) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setGeometryTypeToWAVELink(int) - Method in interface nxopen.annotations.PmiWaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setGeometryUsageType(Mesh2dBuilder.GeometryType) - Method in interface nxopen.cae.Mesh2dBuilder
-
- setGeomFixupTol(double) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setGeomFreeEdgeColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeomFreeEdgeEndMarker(ModelDisplayBuilder.FreeEdgeMarker) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeomFreeEdgeFont(ModelDisplayBuilder.FreeEdgeFont) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeomFreeEdgeLineWidth(ModelDisplayBuilder.FreeEdgeWidth) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeomParentStringValue(String) - Method in interface nxopen.cam.FeatureBasedGeomBuilder
-
Set a string value to the geom parent parameter index for the object.
- setGeomStitchedEdgeColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeomStitchedEdgeEndMarker(ModelDisplayBuilder.StitchedEdgeMarker) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeomStitchedEdgeFont(ModelDisplayBuilder.StitchedEdgeFont) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeomStitchedEdgeLineWidth(ModelDisplayBuilder.StitchedEdgeWidth) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGeomTol(double) - Method in interface nxopen.cam.InspectionImportDmisBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setGiveFailedMessage(int) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Set the giving failed message value.
- setGlobalDeformation(boolean) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setGlobalId(int) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setGlobalMaterialType(TrueShadingBuilder.MaterialType) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setGlobalMaterialType(TrueStudioBuilder.GlobalMaterial) - Method in interface nxopen.display.TrueStudioBuilder
-
License requirements: None.
- setGlobalOffsetRadius(AeroJoggleBuilder.SideType, boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the Global flag for offset radius
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setGlobalOptimization(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setGlobalSearch(boolean) - Method in interface nxopen.facet.BestFitAlignBuilder
-
Sets a value indicating whether to do a global search
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setGlobalSensitivityDesignVariables(DAODesignVariable[]) - Method in interface nxopen.cae.optimization.DAOSolution
-
Sets the optimization solution design variables for global sensitivity optimization type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGlobalSensitivityFlag(boolean) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGlobalSizeAutoScaled(boolean) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setGlobalSizeScale(double) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setGlobalStationaryRadius(AeroJoggleBuilder.SideType, boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the Global flag for stationary radius
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setGlobalStopPointMethod(NcmWedmBuilder.GlobalStopPointMethodTypes) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGlobalStopPointType(NcmWedmBuilder.GlobalStopPointTypes) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGloveThickness(double) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setGohomePoint(Point) - Method in interface nxopen.cam.TurnAvoidanceGohomeBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGoHomePoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGohomePointMode(TurnAvoidanceGohomeBuilder.GohomePointModes) - Method in interface nxopen.cam.TurnAvoidanceGohomeBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGohomePointMotionType(TurnAvoidanceGohomeBuilder.GohomePointMotionTypes) - Method in interface nxopen.cam.TurnAvoidanceGohomeBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGoHomePointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGoHomePointToolAxis(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGotoAangle(double) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setGotoAangle(double) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setGotoBangle(double) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setGotoBangle(double) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setGotoRun(double) - Method in interface nxopen.tooling.RunSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setGougeCheckClearanceMethod(ToolPathEditorBuilder.ClearanceMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setGougeCheckClearancePlane(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setGougeChecking(boolean) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGougeCheckStockOptions(GougeCheckBuilder.GougeCheckStock) - Method in interface nxopen.cam.GougeCheckBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGougeCheckStockUserDefinedValue(double) - Method in interface nxopen.cam.GougeCheckBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setGrade(String) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setGraphAutoSave(boolean) - Method in interface nxopen.cae.PostGraphPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setGraphEndAction(GraphControlBuilder.EndAction) - Method in interface nxopen.mechatronics.GraphControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setGraphicFilenames(String[]) - Method in interface nxopen.PlotBuilder
-
Sets all the Graphic filenames to be saved.
- setGraphicsThreshold(int) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the number of graphic symbols after which the number of symbols in expanded mode will be reduced
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGraphicsThresholdFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the graphics symbol display is to be simplified in expanded mode
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGraphicSymbolDisplayed(boolean) - Method in interface nxopen.cae.SelectionRecipeDisplay
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGraphicSymbolDisplayFlag(boolean) - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Sets the true/false flag based on whether the graphic symbol of the DOF Set is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGraphicSymbolDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the graphic symbol of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGraphOverhead(int) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
- setGraphStyle(int, GraphStyle) - Method in interface nxopen.cae.xyplot.DiagramDisplayStyles
-
Sets the graph style.
- setGraphTitle(String) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setGraphTitle(String) - Method in interface nxopen.cae.PostGraphOrbitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setGraphTitle(String) - Method in interface nxopen.motion.GraphBuilder
-
- setGrateOrientationReference(PlatformCreatorBuilder.ReferenceType) - Method in interface nxopen.routing.PlatformCreatorBuilder
-
License requirements: routing_platform ("Routing Platform")
.
- setGrateOrientationSymbolDisplay(boolean) - Method in interface nxopen.routing.PlatformCreatorBuilder
-
License requirements: routing_platform ("Routing Platform")
.
- setGravitationalConstants(double[]) - Method in interface nxopen.uf.UFMotion
-
- setGravityCenter(String) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setGravityVector(Direction) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setGridAdultFullOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridAdultPartialOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridAngleTolerance(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setGridBackgroundColor(NXColor) - Method in interface nxopen.cae.xyplot.LegendTableStyle
-
License requirements: None.
- setGridBackgroundFilled(boolean) - Method in interface nxopen.cae.xyplot.LegendTableStyle
-
License requirements: None.
- setGridChildFullOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridChildPartialOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
- setGridColor(int) - Method in interface nxopen.preferences.WorkPlane
-
Sets the grid color.
- setGridFailColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridFont(DisplayableObject.ObjectFont) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
- setGridID(String) - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setGridIncrement(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setGridIsNonUniform(boolean) - Method in interface nxopen.preferences.WorkPlane
-
Sets the grid non uniform flag.
- setGridLineColor(int) - Method in interface nxopen.preferences.PartModeling
-
Sets the grid line color
License requirements: None.
- setGridLineFont(PartModeling.GridKnotLineFontType) - Method in interface nxopen.preferences.PartModeling
-
Sets the grid line font
License requirements: None.
- setGridLinesUCount(int) - Method in interface nxopen.preferences.PartModeling
-
Sets the U count for grid lines.
- setGridLinesVCount(int) - Method in interface nxopen.preferences.PartModeling
-
Sets the V count for grid lines.
- setGridLineVisible(boolean) - Method in interface nxopen.cae.xyplot.LegendTableStyle
-
License requirements: None.
- setGridNCAP1000OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridNCAP1000OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridNCAP1350OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridNCAP1350OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridNCAP1700OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridNCAP1700OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridNCAP650OutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridNCAP650OutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridNCAPUntranslatedOutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridObject(SessionDrafting.GridObjectType) - Method in interface nxopen.preferences.SessionDrafting
-
Sets the drafting grid object.
- setGridOnTop(boolean) - Method in interface nxopen.preferences.WorkPlane
-
Sets the grid on top flag.
- setGridOrientation(DatumPlaneGridBuilder.GridOrientationType) - Method in interface nxopen.display.DatumPlaneGridBuilder
-
License requirements: None.
- setGridOutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridOutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridParameters(UFDisp.GridContext, UFDisp.Grid) - Method in interface nxopen.uf.UFDisp
-
- setGridPart(String) - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setGridPassColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridPointAppliedForce(boolean) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setGridPointForce(boolean) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setGridPointReactionForce(boolean) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setGridPointReactionForceMPC(boolean) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setGridPointsColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridResolution(PartModeling.GridResolutionType) - Method in interface nxopen.preferences.PartModeling
-
Sets the grid resolution.
- setGridRgbcolorPicker(double[]) - Method in interface nxopen.display.TrueShadingBuilder
-
Sets the grid RGB color picker
License requirements: None.
- setGridSettings(GeneralWorkFlowBuilder.GridSettingsType) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setGridSnapTolerance(double) - Method in interface nxopen.weld.DatumSurfaceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setGridTopologyEligibilityFlag(boolean) - Method in interface nxopen.routing.SpaceReservationBuilder
-
Sets the grid topology eligibility flag.
- setGridTopologyEligibilityFlag(boolean) - Method in interface nxopen.routing.StockBuilder
-
Sets the grid topology eligibility flag.
- setGridType(ConceptFromSpreadsheetBuilder.Type) - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setGridType(WorkPlane.Grid) - Method in interface nxopen.preferences.WorkPlane
-
Sets the grid type.
- setGridUntranslatedOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridUseBodyColor(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets whether grid line use body color
License requirements: None.
- setGridUseBodyFont(boolean) - Method in interface nxopen.preferences.PartModeling
-
Sets whether grid use body font
License requirements: None.
- setGridWarningColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGridWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
- setGrooveAngle(String) - Method in interface nxopen.annotations.LineWeldSideData
-
Sets the groove angle
License requirements: None.
- setGrooveAngle(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setGrooveCountersinkAngle(String) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setGrooveRadius(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setGrooveShape(WeldGrooveShape) - Method in interface nxopen.weld.GrooveBuilder
-
- setGrooveType(WeldGrooveType) - Method in interface nxopen.weld.GrooveBuilder
-
- setGroundPlaneType(EnvironmentBuilder.GroundPlaneTypes) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: None.
- setGroundReflection(boolean) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setGroundVisibility(boolean) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setGroundWidePoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setGroup(ShipDimensionBuilder.GroupType) - Method in interface nxopen.annotations.ShipDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setGroup(boolean) - Method in interface nxopen.blockstyler.UIBlock
-
License requirements: None.
- setGroup(boolean) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setGroup(String) - Method in interface nxopen.pdm.PersistentSettings
-
License requirements: None.
- setGroup(String) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setGroup(String, String) - Method in interface nxopen.uf.UFClone
-
- setGroupActive(boolean) - Method in interface nxopen.features.Feature
-
Set a feature group as active group.
- setGroupActive(boolean) - Method in interface nxopen.Group
-
Set a sketch group as active group in Direct Sketch, STE or in Drafting Sketch.
- setGroupByAttributes(String) - Method in interface nxopen.cam.GroupFeatures
-
License requirements: cam_base ("CAM BASE")
.
- setGroupByIdenticalAttributes(boolean) - Method in interface nxopen.cam.GroupFeatures
-
- setGroupByMachiningAccessDirection(boolean) - Method in interface nxopen.cam.GroupFeatures
-
License requirements: cam_base ("CAM BASE")
.
- setGroupConstraintOption(SessionSketch.GroupConstraintType) - Method in interface nxopen.preferences.SessionSketch
-
Sets the sketch group external constraint management option
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setGroupDisplayProperties(boolean) - Method in interface nxopen.GroupBuilder
-
License requirements: None.
- setGroupDisplayProperties(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setGroupElemFaceMultiGroupColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGroupElemFaceNoGroupColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGroupElemMultiGroupColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGroupElemNoGroupColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGroupingAllowed(boolean) - Method in interface nxopen.diagramming.NodeBuilder
-
License requirements: None.
- setGroupingMethodOfRule(Rule, Classifier.GroupingMethodOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setGroupInterval(double) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setGroupName(String) - Method in interface nxopen.cam.InspectionSaveToLayerBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setGroupName(String) - Method in interface nxopen.GroupBuilder
-
License requirements: None.
- setGroupName(String) - Method in interface nxopen.motion.MotionBuilder
-
Sets the group name
License requirements: mechanisms ("MECHANISMS")
.
- setGroupName(String) - Method in interface nxopen.motion.MotionObject
-
Sets the group name of motion object
License requirements: mechanisms ("MECHANISMS")
.
- setGroupObjects(boolean) - Method in interface nxopen.features.OffsetCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setGroupObjects(boolean) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setGroupOperatorOption(TBSBaseDesignVariableBuilder.GroupOperator) - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setGroupPoints(boolean) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setGroups(NXObject[]) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionByGroupBuilder
-
Set the input groups
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setGroups(CaeGroup[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set groups to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setGroupsToDelete(PartCleanup.DeleteGroups) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies what empty groups should be
deleted.
- setGroupSymbols(IdSymbol[]) - Method in interface nxopen.annotations.CalloutGroupBuilder
-
- setGroupToExplore(GroupLabel) - Method in interface nxopen.visualreporting.VisualReportExplorer
-
- setGroupType(MotionObject.GroupType) - Method in interface nxopen.motion.MotionBuilder
-
Sets the group type
License requirements: mechanisms ("MECHANISMS")
.
- setGroupTypeOption(MotionObject.GroupType) - Method in interface nxopen.motion.MotionObject
-
Sets the group type of motion object
License requirements: mechanisms ("MECHANISMS")
.
- setGrowDirectionOptions(PartsListBuilder.PartsListGrowDirectionOptions) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setGrowthDirection(DrawingRegionBuilder.RegionGrowthDirection) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setGrowthRate(double) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setGuid(String) - Method in interface nxopen.routing.RootObject
-
Sets the object's Global Unique Identifier (GUID).
- setGuideCurve(Section) - Method in interface nxopen.weld.JointmarkGuideBuilder
-
License requirements: ugweld ("UG WELD")
.
- setGuideDirection(MWDesignGuideLinesBuilder.DirectionType) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
License requirements: None.
- setGuideObjectType(AeroFlangeBuilder.GuideObjectTypes) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setGuideObjectType(AeroRibBuilder.GuideObjectTypes) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setGuideOffsetVector(boolean) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setGuideVector(Direction) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
License requirements: None.
- setgun() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
TODO: fill in a description for this
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- SetGunApproachBuilder - Interface in nxopen.tooldesigner
-
SetGunApproachBuilder
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createSetGunApproachBuilder
Default values.
- setGunSelction(TaggedObject) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Set the gun selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setGunSelection(TaggedObject) - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Set the gun selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setHalfAngle(boolean) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setHandDataSae(HumanData.SideType, String, String, String, String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the steering wheel SAE Data, L11, H17, W9 and A18 of hand data, the steering wheel pedal type
should be set as Sae
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandFootCsys(HumanData.HandFootType, HumanData.SideType, Point3d, Matrix3x3) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the Csys of hand foot, the hand foot csys should be on solid, curve or not conflict with
SAE data related to its steering wheel and pedal type.
- setHandFootDataCurves(HumanData.HandFootType, HumanData.SideType, NXObject[]) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the curves or edges of steering wheel or pedal of hand foot data, the steering wheel pedal type should
be set as Curve and the input curves should be closed
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandFootDataSolids(HumanData.HandFootType, HumanData.SideType, Body[]) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the solid bodies of steering wheel or pedal of hand foot data, the steering wheel pedal type should be set as Solid
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandFootDataType(HumanData.HandFootType, HumanData.SideType, HumanPosturePredictionBuilder.SteeringWheelPedalType) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the steering wheel and pedal types of hand foot data.
- setHandGoalAllowNormal(HumanData.SideType, boolean) - Method in interface nxopen.features.HumanBuilder
-
Sets the allow normal status of hand goal for active reach, if it is TRUE, use the palmcenter site with the target z axis normal
to define the hand orientation
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandGoalAllowRotate(HumanData.SideType, boolean) - Method in interface nxopen.features.HumanBuilder
-
Sets the allow rotate status of hand for active reach, if it is TRUE, rotate the target z axis normal to the best guess
directions to define the hand orientation
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandGoalCsys(HumanData.SideType, CoordinateSystem) - Method in interface nxopen.features.HumanBuilder
-
Sets hand goal csys for active reach, the hand goal type should be set as csys
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandGoalOrientation(HumanData.SideType, Matrix3x3) - Method in interface nxopen.features.HumanBuilder
-
Sets hand goal orientaion for active reach, the hand goal type should be hand figure or point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandGoalPoint(HumanData.SideType, Point) - Method in interface nxopen.features.HumanBuilder
-
Sets hand goal point for active reach, the hand goal type should be point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandGoalPosition(HumanData.SideType, Point3d) - Method in interface nxopen.features.HumanBuilder
-
Sets hand goal position for active reach, the hand goal type should be hand figure
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandGoalType(HumanData.SideType, HumanData.HandGoalType) - Method in interface nxopen.features.HumanBuilder
-
Sets hand goal type for active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHandleActiveColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the color of active handles.
- setHandleColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the color of handles.
- setHandleFixedSizeFlag(boolean) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setHandleOrientation(Vector3d) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setHandleOrientation(Vector3d) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setHandleOrientxpressColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the color of the OrientXpress handle.
- setHandleOrigin(Point3d) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setHandleOrigin(Point3d) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setHandleOrigin(Point3d) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setHandlePoint(Point) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHandlePreselectionColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the preselection color of handles.
- setHandleRadius(double) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setHandleRadiusOffset(double) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setHandlesColor(int) - Method in interface nxopen.preferences.SessionVisualizationColorSetting
-
- setHandleSelectionColor(NXColor) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the selection color of handles.
- setHandleSize(int) - Method in interface nxopen.preferences.VisualizationHandles
-
Sets the default handle size
License requirements: None.
- setHandleXAxis(Vector3d) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setHandleZAxis(Vector3d) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setHandlingBodies(ViewWorkflowBuilder.Handlingbodies) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
- setHandlingBodiesTypes(ViewWorkflowBuilder.HandlingBodiesType) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: None.
- setHandrailPartCharx(CharacteristicList) - Method in interface nxopen.routing.HandrailBuilder
-
Sets the handrail part characteristics
License requirements: routing_platform ("Routing Platform")
.
- setHandShapeData(int, String, String, String, double) - Method in interface nxopen.features.HumanBuilder
-
Sets the hand shape data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHanger(boolean) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setHangerNumber(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setHarmonicIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setHarnesses(HarnessDevice[]) - Method in interface nxopen.formboard.UpdateFormboardBuilder
-
Sets the harnesses within the harness part that the formboard must be
compared with.
- setHarnessPart(Part) - Method in interface nxopen.formboard.UpdateFormboardBuilder
-
Sets the 3D harness part file to compare the formboard against.
- setHarnessPartOccurrence(Component) - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setHasAbsoluteColorPlot(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setHasAdditionalValuesLabel(DeviationGaugeBuilder.AdditionalValuesLabelType) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setHasAttachment(boolean) - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setHasColumnLabels(boolean) - Method in interface nxopen.blockstyler.Table
-
License requirements: None.
- setHasCrossCurveDeviationLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setHasCsysImport(boolean) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setHasCustomScratchDirectory(boolean) - Method in interface nxopen.cae.optimization.TBSOutputControlOptions
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setHasFitDirection(boolean) - Method in interface nxopen.features.RefitFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHasHingeVector(boolean) - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setHasHorizontalRails(boolean) - Method in interface nxopen.routing.HandrailBuilder
-
License requirements: routing_platform ("Routing Platform")
.
- setHasInfoLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setHasInitialValue(boolean) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setHasInnerToleranceLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setHasLinearTransition(boolean) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setHasLowerBound(boolean) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setHasMaximumValueLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setHasMaxNeedleLength(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setHasMinimumValueLabel(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setHasOriginGwif(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setHasPlaneConstraint(boolean) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setHasPlaneConstraint(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setHasProportionalUpdate(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setHasRadius(boolean) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHasReversedDirection(boolean) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHasSketchImport(boolean) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setHasStubbedDatumStyle(boolean) - Method in interface nxopen.annotations.Gdt
-
Sets a flag indicating whether the leader has a stubbed datum style.
- setHasSymmetricModelingConstraint(boolean) - Method in interface nxopen.features.GeometricConstraintData
-
License requirements: None.
- setHasUniformSegments(boolean) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHasUnitsMenu(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setHasUpperBound(boolean) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setHasUserSpecifiedValue(boolean) - Method in interface nxopen.visualreporting.Condition
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setHasUserSpecifiedValueForCondition(Condition, boolean) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setHatchAngle(double) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setHatchAngle(double) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHatchDistance(double) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setHatchDistance(double) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHatchFile(String) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setHatchFillPreferences(UFDrf.HatchFillPreferences) - Method in interface nxopen.uf.UFDrf
-
- setHatchMaterial(String) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setHeadDesignation(ToolChangeCiBuilder.HeadDesignationTypes) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setHeadDiameter(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setHeadDiameterType(HeadDiameterType) - Method in interface nxopen.cae.connections.Bolt
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setHeaderFile(String) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setHeaderFlag(boolean) - Method in interface nxopen.cae.ftk.OptionSetting
-
Set the adding header flag when export to CSV file
License requirements: None.
- setHeaderInfo(String) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setHeaderLocation(TableSectionStyleBuilder.LocationOfHeader) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setHeaderLocation(HeaderLocation) - Method in interface nxopen.diagramming.tables.TableSettingsBuilder
-
License requirements: None.
- setHeaderOrientation(HeaderOrientation) - Method in interface nxopen.diagramming.tables.TableSettingsBuilder
-
License requirements: None.
- setHeaderVisible(boolean) - Method in interface nxopen.cae.xyplot.LegendTableStyle
-
License requirements: None.
- setHeadEyeType(HumanData.InverseKinematicsHeadEyeType) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHeadSelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setHeadSpiderScale(double) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setHeadSpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setHeal(boolean) - Method in interface nxopen.features.DeleteCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHeal(boolean) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setHealBodies(boolean) - Method in interface nxopen.AcisImporter
-
License requirements: None.
- setHealBodies(boolean) - Method in interface nxopen.Catiav4Importer
-
License requirements: None.
- setHealBodies(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setHealBodies(boolean) - Method in interface nxopen.ProeImporter
-
License requirements: None.
- setHealGeometryOnImport(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the heal geometry on import flag for I-DEAS import
License requirements: None.
- setHealMethod(HealMethod) - Method in interface nxopen.routing.HealPath
-
Set heal method.
- setHealOption(boolean) - Method in interface nxopen.features.AdmMoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setHealPathCurveType(RoutingPath.CurveType) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setHealPlanar(boolean) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setHealSolutionCsys(CoordinateSystem) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setHealTraversalOrder(PathTransitionBuilder.TraversalOrder) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setHeelHeight(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setHeelLength(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setHeelPoint(Point) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setHeelRadian(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setHeelReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setHeelReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setHeelReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setHeelReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setHeelWidth(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setHeight(double) - Method in interface nxopen.ame.FormSheetBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setHeight(double) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHeight(double) - Method in interface nxopen.annotations.TargetPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHeight(int) - Method in interface nxopen.blockstyler.DrawingArea
-
License requirements: None.
- setHeight(int) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setHeight(int) - Method in interface nxopen.blockstyler.MultilineString
-
License requirements: None.
- setHeight(int) - Method in interface nxopen.blockstyler.ScrolledWindow
-
License requirements: None.
- setHeight(int) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setHeight(double) - Method in interface nxopen.cam.ThreadedBossSet
-
License requirements: cam_base ("CAM BASE")
.
- setHeight(double) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setHeight(double) - Method in interface nxopen.diagramming.tables.RowBuilder
-
The method to set the height of a row.
- setHeight(double) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Sets the height of the handling core.
- setHeight(double) - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Sets the height of handling cores.
- setHeight(double) - Method in interface nxopen.die.PadChildBuilder
-
Sets the height of the die pad.
- setHeight(double) - Method in interface nxopen.die.PadParentBuilder
-
Sets the height of die pads.
- setHeight(double) - Method in interface nxopen.die.PressureSystemChildBuilder
-
Sets the height of the pressure system.
- setHeight(double) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the height of pressure systems.
- setHeight(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the height of the die rib.
- setHeight(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the height of die ribs.
- setHeight(double) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHeight(String) - Method in interface nxopen.features.BlockFeatureBuilder
-
The expression representing the block height.
- setHeight(String) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHeight(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
- setHeight(String) - Method in interface nxopen.features.sheetmetal.JogBuilder
-
- setHeight(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Sets the height of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setHeight(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setHeightDefinedBy(MeshControlBuilder.HeightDefinedByOption) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setHeightDimensionType(AeroRibBuilder.HeightDimensionOptions) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setHeightFrom(NcmPlanarEngRetBuilder.MeasureHeightFrom) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setHeightPolicy(DiagrammingSizingpolicy) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setHeightScale(double) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setHeightSide(BeadBuilder.HeightSideOptions) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Sets the Height side for the bead.
- setHeightStep(double) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setHeightType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setHeightType(HeightType) - Method in interface nxopen.cae.connections.IHeight
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setHeightValue(double) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setHelicalRampAngle(double) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
- setHelixMotion(int, PathHelixMotion) - Method in interface nxopen.cam.Path
-
Updates the data of the helix motion event at the given index
License requirements: None.
- setHelixMotion(PathEvent, PathHelixMotion) - Method in interface nxopen.cam.Path
-
Updates the data of the helix motion event
License requirements: None.
- setHelixOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setHelpParameters(boolean, boolean, double, double) - Method in interface nxopen.ISketchHelpedConstraint
-
Sets the help parameters for the constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setHelpPoint(Point) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHelpPoint(Point) - Method in interface nxopen.features.SphericalCornerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHelpPoint(Point3d) - Method in interface nxopen.positioning.ConstraintReference
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setHelpPoint(Point) - Method in interface nxopen.SketchChamferBuilder
-
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setHelpPoints(boolean, boolean, Point3d, Point3d) - Method in interface nxopen.ISketchHelpedConstraint
-
Sets the help points for the constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setHelpPointSupports(NXObject[], boolean[]) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
For multiple solution case, set support where the help parameters locate to
indicate which solution should be kept.
- setHelpUrl(String) - Method in interface nxopen.features.DeformDefinitionBuilder
-
Sets help url on deform definition feature.
- setHemMethod(EasyPatternBuilder.HemMethodTypes) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setHidden(AssembliesGeneralPropertiesBuilder.HiddenOptions) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setHidden(boolean) - Method in interface nxopen.diagramming.tables.CellRangeBuilder
-
License requirements: None.
- setHiddenColor(int) - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Sets the hidden color.
- setHiddenColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setHiddenColor(NXColor) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenColor(int) - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Sets the hidden color.
- setHiddenEdgeStyle(ViewVisualizationVisual.HiddenEdgeStyleType) - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Sets the hidden edge display style for shaded faces in the view.
- setHiddenFont(Font) - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Sets the hidden font
License requirements: drafting ("DRAFTING")
.
- setHiddenFont(Font) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setHiddenFont(Font) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenFont(Font) - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Sets the hidden font
License requirements: drafting ("DRAFTING")
.
- setHiddenGeometryColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the color of hidden geometry.
- setHiddenGeometryColor(int) - Method in interface nxopen.preferences.PartVisualizationShade
-
Sets the shade hidden geometry color.
- setHiddenLensFlareToggle(boolean) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setHiddenline(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the status of hiddenline.
- setHiddenLine(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenline(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the status of hiddenline.
- setHiddenlineColor(int) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the color of hiddenline.
- setHiddenLineColor(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenlineColor(int) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the color of hidden line.
- setHiddenlineFont(Font) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the font of hiddenline
License requirements: drafting ("DRAFTING")
.
- setHiddenLineFont(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenlineFont(Font) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the font type of hidden line.
- setHiddenLineHatching(boolean) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets the status of hidden line hatching.
- setHiddenLineHatching(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenLineHatching(boolean) - Method in interface nxopen.preferences.SectionViewPreferences
-
Sets the status of hidden line hatching.
- setHiddenLines(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenLinesColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenLinesFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenLinesWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenlineWidth(Width) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the width of hiddenline
License requirements: drafting ("DRAFTING")
.
- setHiddenLineWidth(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenlineWidth(Width) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the width of hidden line or edges.
- setHiddenTabPages(int[]) - Method in interface nxopen.blockstyler.TabControl
-
Sets the HiddenTabPages entered.
- setHiddenWidth(Width) - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Sets the hidden width
License requirements: drafting ("DRAFTING")
.
- setHiddenWidth(Width) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setHiddenWidth(Width) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHiddenWidth(Width) - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Sets the hidden width
License requirements: drafting ("DRAFTING")
.
- setHiddenWireframeColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHide(boolean) - Method in interface nxopen.diagramming.BulkEditBuilder
-
Sets the visibility of sheet elements.
- setHide(boolean) - Method in interface nxopen.pid.BulkEditBuilder
-
Sets the visibility of sheet elements.
- setHideBlankGeometry(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setHideBodyOption(boolean) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHideConstructionProcess(boolean) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setHideCsys(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setHideFeetAndInchMarks(boolean) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setHideFeetInchMark(boolean) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setHideLabel(boolean) - Method in interface nxopen.diagramming.BulkEditBuilder
-
Sets the visibility of labels.
- setHideLabel(boolean) - Method in interface nxopen.pid.BulkEditBuilder
-
Sets the visibility of labels.
- setHideMotionItem(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHideOriginal(boolean) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setHideOriginal(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setHideOriginal(boolean) - Method in interface nxopen.features.FreeTransformerBuilder
-
License requirements: None.
- setHideOriginal(boolean) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHideOriginal(boolean) - Method in interface nxopen.features.MeshTransformerBuilder
-
License requirements: None.
- setHideOriginal(boolean) - Method in interface nxopen.features.PatternGeometryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHideOriginal(boolean) - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setHideOriginal(boolean) - Method in interface nxopen.features.shipdesign.MarkingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setHideOriginal(boolean) - Method in interface nxopen.features.UntrimBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHideOriginal(boolean) - Method in interface nxopen.features.WaveDatumBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setHideOriginal(boolean) - Method in interface nxopen.features.WaveSketchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHideOriginal(boolean) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setHideOriginalCurves(boolean) - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setHidePartGeometry(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setHideReliefStatus(boolean) - Method in interface nxopen.tooling.ReliefDesignBuilder
-
License requirements: None.
- setHideSafeZone(boolean) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setHideSmoothEdges(boolean) - Method in interface nxopen.facet.STLImportBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setHideSmoothEdges(boolean) - Method in interface nxopen.STLImporter
-
Sets the Hide Smooth Edges flag.
- setHideSmoothEdges(boolean) - Method in interface nxopen.VRMLImporter
-
Sets the Hide Smooth Edges flag.
- setHideSubBlocksAsString(String) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setHideTool(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.
- setHideToolBodyFlag(boolean) - Method in interface nxopen.features.AssemblyCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHighFrequencyCutoff(double) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setHighFrequencyCutoff(double) - Method in interface nxopen.cae.PreTestSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setHighFrequencyFilteringMode(boolean) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setHighFrequencyFilteringMode(boolean) - Method in interface nxopen.cae.PreTestSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setHighLabelPreference(boolean) - Method in interface nxopen.cae.CoordinateSelectionRecipe
-
Set the high label preference.
- setHighLabelPreference(boolean) - Method in interface nxopen.cae.PointSelectionRecipe
-
Set the high label preference.
- setHighlight(NXObject, boolean) - Method in interface nxopen.tooling.RemoveHolesBuilder
-
Set object highlight or unhighlight.
- setHighlight(Tag, int) - Method in interface nxopen.uf.UFDisp
-
- setHighlightCollision(boolean) - Method in interface nxopen.tooling.RunSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHighlightColor(NXColor) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setHighlightConnectingFacesScale(int) - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
License requirements: None.
- setHighlightDamageValues(boolean) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setHighLightFacesWithSameClearance(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHighlightFaceTranslucency(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setHighlightHiddenEdgesToggle(boolean) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setHighlightManualText(boolean) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setHighlightOnCollision(boolean) - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setHighlightOnCollision(boolean) - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setHighlightOnCollision(boolean) - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setHighlightOnlySuppliedObjectsOption(boolean) - Method in interface nxopen.features.CustomFeatureHighlightEvent
-
- setHighlightOriginalToggle(boolean) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setHighlightPath(Path) - Method in interface nxopen.routing.ManualRouteBuilder
-
This function sets highlight path amongst all paths, and this highlight path only
will be used for routing the stock device
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setHighlights(int, Tag[], int) - Method in interface nxopen.uf.UFDisp
-
- setHighlightSelectedFace(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setHighlightSelectionOnRolloverToggle(boolean) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setHighlightTargets(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the flag indicating whether or not highlighting of targets is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setHighlightWire(boolean) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the option to highlight a wire in the connection list navigator.
- setHighlightWithThickWidthToggle(boolean) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setHighPrecisionRotation(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Sets whether mouse-driven rotation is to be done using a higher precision
than normal, which means that a given mouse motion will result in
a smaller rotation.
- setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Button
-
License requirements: None.
- setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Label
-
License requirements: None.
- setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.TabControl
-
License requirements: None.
- setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Table
-
License requirements: None.
- setHighQualityBitmap(boolean) - Method in interface nxopen.blockstyler.Wizard
-
License requirements: None.
- setHighRadius(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHighThicknessColor(NXColor) - Method in interface nxopen.cae.ThicknessBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setHingeDirection(Direction) - Method in interface nxopen.drawings.SectionLineBuilder
-
- setHingeLine(Direction) - Method in interface nxopen.drawings.OrientationViewStyle
-
Sets the hinge line for an existing auxillary view.
- setHingePoint(Point) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setHint(String) - Method in interface nxopen.report.BaseArgument
-
License requirements: None.
- setHint(String[]) - Method in interface nxopen.report.CommandBuilder
-
Sets the command hint
License requirements: None.
- setHint(String[]) - Method in interface nxopen.report.UserInput
-
Sets the user input hint.
- setHipPoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setHistoryBuffer(int) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setHistoryFreeMode() - Method in interface nxopen.preferences.PartModeling
-
- setHistoryMode() - Method in interface nxopen.preferences.PartModeling
-
Changes the modeling mode to History Modeling.
- setHolderCheck(boolean) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setHolderDescription(String) - Method in interface nxopen.cam.ToolBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setHolderGrooveHand(GrooveToolBuilder.HolderGrooveHands) - Method in interface nxopen.cam.GrooveToolBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setHolderHand(GrooveToolBuilder.HolderHands) - Method in interface nxopen.cam.GrooveToolBuilder
-
License requirements: None.
- setHolderHand(TurnToolBuilder.HolderHands) - Method in interface nxopen.cam.TurnToolBuilder
-
License requirements: None.
- setHolderId(int) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setHolderIdString(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setHolderLibraryReference(String) - Method in interface nxopen.cam.ToolBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setHolderLibref(String) - Method in interface nxopen.cam.CutterExport
-
License requirements: None.
- setHolderLock(boolean) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setHolderSaveFlag(CutterExport.SaveFlags) - Method in interface nxopen.cam.CutterExport
-
License requirements: None.
- setHolderShankDefinitionMode(TurnToolBuilder.HolderShankDefinitionModes) - Method in interface nxopen.cam.TurnToolBuilder
-
License requirements: None.
- setHolderShankType(TurningToolBuilder.HolderShankTypes) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setHolderStyle(GrooveToolBuilder.HolderStyles) - Method in interface nxopen.cam.GrooveToolBuilder
-
License requirements: None.
- setHolderStyle(TurnToolBuilder.HolderStyles) - Method in interface nxopen.cam.TurnToolBuilder
-
License requirements: None.
- setHolderToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setHolderUse(boolean) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setHoldingForce(String) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setHoleAllowNonCircularHolesToggle(boolean) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setHoleAttributes(String, String, int, String, String, String) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the hole attributes, note existance of attributes depends on usage in
main feature.
- setHoleAttributes(String, String, int, String, String, String) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the hole attributes, note existance of attributes depends on usage in
main feature.
- setHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PadChildBuilder
-
Sets the hole attributes, note existance of attributes depends on usage in
main feature.
- setHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PadParentBuilder
-
Sets the hole attributes, note existance of attributes depends on usage in
main feature.
- setHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the hole attributes, note existance of attributes depends on usage in
main feature
License requirements: ug_die_design ("Die Design")
.
- setHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
Sets the hole attributes, note existance of attributes depends on usage in
main feature
License requirements: ug_die_design ("Die Design")
.
- setHoleAxis(Tag, UFVariant, Tag) - Method in interface nxopen.uf.UFHmop
-
- setHoleAxisType(OperationBuilder.HoleAxisTypes) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setHoleAxisValues(double[]) - Method in interface nxopen.cam.OperationBuilder
-
Set the Hole Axis values
License requirements: cam_base ("CAM BASE")
.
- setHoleBossGeomType(HoleBossGeom.HoleBossTypes) - Method in interface nxopen.cam.HoleBossGeom
-
License requirements: cam_base ("CAM BASE")
.
- setHoleCenter(Point) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setHoleCenters(Point[]) - Method in interface nxopen.die.PadChildBuilder
-
Sets the hole centers of the die pad.
- setHoleColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHoleDatumCsys(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the datum CSYS for the hole in the fastener assembly
License requirements: None.
- setHoleDefaultCylindricalFace(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the default cylindrical face for the hole in the fastener assembly
License requirements: None.
- setHoleDepth(double) - Method in interface nxopen.tooling.WireHoleBuilder
-
License requirements: None.
- setHoleDepth(Tag, UFVariant, Tag) - Method in interface nxopen.uf.UFHmop
-
- setHoleDepthLimitOption(HolePackageBuilder.HoleDepthLimitOptions) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHoleDepthLimitOption(EndHoleData.HoleDepthLimitOptions) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHoleDepthType(OperationBuilder.HoleDepthTypes) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setHoleDiameter(double) - Method in interface nxopen.die.PadChildBuilder
-
Sets the hole diameter of the die pad.
- setHoleDiameter(double) - Method in interface nxopen.die.PadParentBuilder
-
Sets the hole diameter of die pads.
- setHoleDiameter(double) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setHoleDiameter(double) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setHoleDiameter(double) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setHoleDiameter(double, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the diameter for the hole in the fastener assembly
License requirements: None.
- setHoleDiameter(double) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHoleDiameter(double) - Method in interface nxopen.tooling.WireHoleBuilder
-
License requirements: None.
- setHoleDirection(Point3d, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the direction for the hole in the fastener assembly
License requirements: None.
- setHoleFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the faces for the hole in the fastener assembly
License requirements: None.
- setHoleForm(StartHoleData.HoleForms) - Method in interface nxopen.geometricutilities.StartHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHoleFreeEdgesToggle(boolean) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setHoleGridOrientation(Point3d, Matrix3x3) - Method in interface nxopen.die.SteelInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setHoleHeight(double, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the height for the hole in the fastener assembly
License requirements: None.
- setHoleIndexColor(NXColor) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHoleIndexSize(double) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHoleIndexTypeEnum(HoleManufacturingNoteBuilder.HoleIndexType) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHoleLocation(Point3d) - Method in interface nxopen.features.HoleFeatureBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setHoleManufacturingNoteColor(NXColor) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHoleManufacturingNoteSize(double) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHoleOriginDiameter(double, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the origin diameter for the hole in the fastener assembly
License requirements: None.
- setHoleOriginHeight(double, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the origin height for the hole in the fastener assembly
License requirements: None.
- setHoleOriginPosition(Point3d, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the origin position for the hole in the fastener assembly
License requirements: None.
- setHolePinMatching(InspectionMeasDataBuilder.BoundingType) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: None.
- setHolePosition(Point3d, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the position for the hole in the fastener assembly
License requirements: None.
- setHoleShape(PierceItemBuilder.HoleShapeType) - Method in interface nxopen.die.PierceItemBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setHoleSideCylindricalFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the side cylindrical faces for the hole in the fastener assembly
License requirements: None.
- setHoleStyle(boolean) - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Sets the is hole style dimension
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setHoleSubType(String) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setHoleSubType(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setHoleTolerance(double) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHoleTop(Tag, UFVariant, Tag) - Method in interface nxopen.uf.UFHmop
-
- setHoleTreatmentDiameter(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
SETS the hole treatment diameter value in Flat Pattern operation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setHoleTreatmentDiameter(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the hole treatment diameter value in Flat Pattern operation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setHoleTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
SETS the hole treatment type in Flat Pattern operation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setHoleTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the hole treatment type in Flat Pattern operation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setHoleType(String) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setHoleType(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setHoleType(HoleDatumSymbolBuilder.SymbolType) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setHoleType(NXObject, ReusablePocketBuilder.Hole) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Sets hole type.
- setHoleTypeEnum(FaceColorManagementBuilder.HoleTypeEnumValue) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setHomePageURL(String) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the home page URL
License requirements: None.
- setHomePtMethod(InspectionCmmCommandBuilder.HomePtMethods) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setHomePtPoint(Point) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setHomogeneousPlies(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setHomogeneousPlies(boolean) - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setHorizontal(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setHorizontal(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setHorizontalAlignment(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setHorizontalCenteringMark(SheetBordersAndZonesBuilder.HorizontalCenteringMarkType) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setHorizontalCenteringMark(BordersAndZonesBuilder.HorizontalCenteringMarkType) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setHorizontalDirection(Direction) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setHorizontalDirection(Direction) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setHorizontalFlip(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHorizontalGrowthDirection(DrawingRegionBuilder.RegionHorizontalGrowthDirection) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setHorizontalInferredMarginLocation(Point3d) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHorizontalPointTravel(double) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
- setHorizontalReference(Direction) - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setHorizontalReference(Direction) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setHorizontalRefVector(Direction) - Method in interface nxopen.geometricutilities.HorizontalReference
-
License requirements: None.
- setHorizontalSize(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setHorizontalSize(double) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setHorizontalSize(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setHorizontalSize(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setHorizontalTextJustification(TextJustification) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setHorizTextJust(TextJustification) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the horizontal text justification
License requirements: None.
- setHostName(String) - Method in interface nxopen.ame.AMEManager
-
Set the host name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setHostName(String) - Method in interface nxopen.mechatronics.OPCClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setHotSpot(Point) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setHotSpotText(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setHoverSceneDialogDelay(int) - Method in interface nxopen.annotations.DimensionWorkflowBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setHrnPostExportPlugin(CustomManager.ImportExportPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin called just after Routing exports an HRN file.
- setHrnPreImportPlugin(CustomManager.ImportExportPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin called before importing an HRN file.
- setHubColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setHubExtensions(BladeCutLevels.HubExtensionsTypes) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setHuman(Human) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setHumidityPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setHWAddress(String) - Method in interface nxopen.ame.PlcSymbolBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setHWAddressOffsetBit(int) - Method in interface nxopen.ame.PlcSymbolBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setHWAddressOffsetByte(int) - Method in interface nxopen.ame.PlcSymbolBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setHybridParams(double, int, int, Matrix3x3) - Method in interface nxopen.cae.ShellTo3dHybridBuilder
-
Sets the hybrid params
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full")
.
- setHypermatrixBufferSize(int) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setHysteretic(double) - Method in interface nxopen.cae.responsesimulation.NormalMode
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setHysteretic(double) - Method in interface nxopen.motion.NormalModeProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setI(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: None.
- setIcon(String) - Method in interface nxopen.shipdesign.NavigatorNode
-
Sets the node icon.
- setIconName(String) - Method in interface nxopen.features.UserDefinedFeatureIconEvent
-
License requirements: None.
- setIconName(String) - Method in interface nxopen.markup.Icon
-
License requirements: None.
- setIconName(String) - Method in interface nxopen.weld.DatumIconBuilder
-
License requirements: None.
- setIconScaleFactor(double) - Method in interface nxopen.uf.UFMotion
-
- setIconSize(Icon.Size) - Method in interface nxopen.markup.Icon
-
License requirements: None.
- setIconsOnly(boolean) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setICurve(NXObject[]) - Method in interface nxopen.motion.CurveOnCurveBuilder
-
Sets the first curves
License requirements: mechanisms ("MECHANISMS")
.
- setId(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setId(int) - Method in interface nxopen.PhysicalMaterial
-
Sets the material id
License requirements: None.
- setId(int) - Method in interface nxopen.PhysicalMaterialBuilder
-
License requirements: None.
- setId(String) - Method in interface nxopen.routing.RoutingSystem
-
Sets name of routing.
- setId(String) - Method in interface nxopen.tooldesigner.CloneUnitDesignBuilder
-
License requirements: None.
- setIdDisplayRule(String) - Method in interface nxopen.uf.UFUgmgr
-
- setIdealizeParmExp(UFVariant, UFSf.IdealizeParmExp, Tag) - Method in interface nxopen.uf.UFSf
-
- setIdealizeParmFaces(UFVariant, UFSf.IdealizeParmFace, int, Tag[]) - Method in interface nxopen.uf.UFSf
-
- setIdenticalPointResolution(double) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setIdentificationLineLocation(IdentificationLineLocation) - Method in interface nxopen.annotations.LineWeldData
-
Sets the identification line location
License requirements: None.
- setIdentifier(String) - Method in interface nxopen.annotations.BalloonNoteBuilder
-
License requirements: None.
- setIdentifier(String) - Method in interface nxopen.annotations.CompanyProprietaryInformationBuilder
-
License requirements: None.
- setIdentifier(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setIdentifier(String) - Method in interface nxopen.annotations.ExportControlBuilder
-
License requirements: None.
- setIdentifier(String) - Method in interface nxopen.annotations.GeneralNoteBuilder
-
License requirements: None.
- setIdentifier(String) - Method in interface nxopen.annotations.GovernmentSecurityInformationBuilder
-
License requirements: None.
- setIdentifier(String) - Method in interface nxopen.annotations.ProcessSpecificationBuilder
-
License requirements: None.
- setIdentifier(String) - Method in interface nxopen.annotations.SpecificNoteBuilder
-
License requirements: None.
- setIdentifierDisplayRule(String) - Method in interface nxopen.uf.UFClone
-
- setIDirectionBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setIdLabel(int) - Method in interface nxopen.fields.Field
-
Update the ID/Label of the field.
- setIdLine(LineWeldBuilder.IdLineType) - Method in interface nxopen.annotations.LineWeldBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setIdLine1(String) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the id line1 of AFU Header Id
License requirements: None.
- setIdLine2(String) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the id line2 of AFU Header Id
License requirements: None.
- setIdLine3(String) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the id line3 of AFU Header Id
License requirements: None.
- setIdLine4(String) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the id line4 of AFU Header Id
License requirements: None.
- setIdName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIdnameMethod(InspectionCmmCommandBuilder.IdnameMethods) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIdOffset(int) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set id offset
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIdSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the id symbol color, font, and width
License requirements: None.
- setIdSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIdSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIdSymbolSize(double) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the id symbol size
License requirements: None.
- setIdSymbolSize(double) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIdSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIdType(String) - Method in interface nxopen.pdm.AlternateIdManager
-
Sets the value of an ID type.
- setIdwOptions(FieldEvaluator.InverseDistanceWeightingEnum, double) - Method in interface nxopen.fields.FieldTable
-
Set the inverse distance weighting (IDW) interpolation options
License requirements: None.
- setIfEngageDoesNotFit(NcmPlanarEngRetBuilder.IfEngageDoesNotFitTypes) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setIgesSettingsFile(String) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setIgnoreBlankOnTrimSide(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setIgnored(boolean) - Method in interface nxopen.cam.CustomLoopSet
-
- setIgnored(boolean) - Method in interface nxopen.mechatronics.ComparisonResultBase
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setIgnoreExistingFeatures(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
License requirements: None.
- setIgnoreFineFinishOffset(boolean) - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setIgnoreFineFinishOffset(boolean) - Method in interface nxopen.cam.BoundaryTurnSet
-
License requirements: cam_base ("CAM BASE")
.
- setIgnoreFrozen(boolean) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setIgnoreHoles(boolean) - Method in interface nxopen.SketchIntersectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setIgnoreLimits(boolean) - Method in interface nxopen.sim.KinematicImportMcfBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setIgnoreLoopsStatus(GeometrySet.LoopsIgnoreTypes) - Method in interface nxopen.cam.GeometrySet
-
- setIgnoreMember(boolean) - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setIgnoreMinimumBoringDiameter(boolean) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setIgnoreNodesConnectedToTinyEdges(boolean) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIgnoreNodesInSameMesh(boolean) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIgnorePairsWithinSameGroup(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setIgnorePairsWithinSamePart(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setIgnorePairsWithinSameSubassembly(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setIgnorePairsWithinSelectedSubassemblies(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setIgnoreSpecialCharacters(boolean) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setIgnoreTitleBlock(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIgnoreToolTip(boolean) - Method in interface nxopen.cam.HoleDrillingBuilder
-
- setIgnoreTouching(boolean) - Method in interface nxopen.tooling.RunSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setIgnoreUpdateOfIdenticalVersions(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the ignore update of identical versions flag for I-DEAS
License requirements: None.
- setIgnoreWarnings(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
License requirements: None.
- setIgnoreWorkpiece(boolean) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setIgnoringConstraints(boolean) - Method in interface nxopen.assemblies.Arrangement
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setILine(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIlluminationType(DecalBuilder.DecalIllumination) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setImage(String) - Method in interface nxopen.blockstyler.DrawingArea
-
License requirements: None.
- setImage(ImageCaptureBuilder) - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
License requirements: None.
- setImage(Image) - Method in interface nxopen.display.Background
-
License requirements: None.
- setImage(Image) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setImage(Image) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setImage(Image) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setImage(Image) - Method in interface nxopen.display.Reflection
-
License requirements: None.
- setImage(Image) - Method in interface nxopen.display.Wall
-
License requirements: None.
- setImage(String) - Method in interface nxopen.report.ReportImage
-
Replaces the old image file with a new image file.
- setImageAlignPosition(Tag, UFDrf.AlignPosition) - Method in interface nxopen.uf.UFDrf
-
- setImageAspectRatioLock(Tag, boolean) - Method in interface nxopen.uf.UFDrf
-
- setImageBlur(EnvironmentBuilder.ImageBlurType) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setImageBlur(ImageBasedLighting.ImageBlurType) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setImageDimensionsDouble(double[]) - Method in interface nxopen.display.StudioImageCaptureBuilder
-
Sets the double image dimensions, height and width
License requirements: None.
- setImageDimensionsInteger(int[]) - Method in interface nxopen.display.StudioImageCaptureBuilder
-
Sets the integer image dimensions, height and width
License requirements: None.
- setImageFile(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setImageFile(String) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setImageFile(String) - Method in interface nxopen.gateway.ImageCaptureBuilder
-
License requirements: drafting ("DRAFTING")
.
- setImageFileLocation(String) - Method in interface nxopen.diagramming.tables.CellBuilder
-
Sets cell image file location.
- setImageFilename(String) - Method in interface nxopen.display.Background
-
License requirements: None.
- setImageFilename(String) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setImageFilename(String) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setImageFilename(String) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setImageFilename(String) - Method in interface nxopen.display.Reflection
-
License requirements: None.
- setImageFilename(String) - Method in interface nxopen.display.Wall
-
License requirements: None.
- setImageFromPart(String) - Method in interface nxopen.display.DecalBuilder
-
Set a
ImageData
object currently
stored in the part as the image used by the builder.
- setImageFromPart(String) - Method in interface nxopen.display.ImageBaseBuilder
-
Set a
ImageData
object currently
stored in the part as the image used by the builder.
- setImageHeight(double) - Method in interface nxopen.report.ImageOption
-
License requirements: None.
- setImageHeight(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setImageHorizon(double) - Method in interface nxopen.display.Background
-
License requirements: None.
- setImageMovementType(ReflectionAnalysisBuilder.ImageMovementTypes) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setImageName(String) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setImageName(String) - Method in interface nxopen.layout2d.DefineComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setImageName(String) - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setImagePosition(int) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setImagePreviewToggle(boolean) - Method in interface nxopen.display.Image
-
License requirements: None.
- setImageReferencePoint1(Point) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setImageReferencePoint2(Point) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setImageReferencePoint3(Point) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setImageResolution(CGMBuilder.ImageResolutionOption) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setImageResolution(PlotBuilder.ImageResolutionOption) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setImageResolution(PrintBuilder.ImageResolutionOption) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setImageResolution(PrintPDFBuilder.ImageResolutionOption) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setImageRotation(double) - Method in interface nxopen.display.Background
-
License requirements: None.
- setImageRotation(double) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setImageRotation(double) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setImageRotation(double) - Method in interface nxopen.report.ImageOption
-
License requirements: None.
- setImageSize(SessionVisualizationHighQualityImage.ImageSizeType, int, int) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage
-
Specifies the image size to use for the generation of the High Quality Image.
- setImageSizeSetting(ReflectionAnalysisBuilder.ImageSizeOption) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setImageSizeType(DecalBuilder.ImageSize) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setImageType(ImageBasedLighting.ImagesType) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setImageUpVector(Direction) - Method in interface nxopen.display.Background
-
License requirements: None.
- setImageUpVector(Direction) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setImageUpVector(Direction) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setImageUpVectorType(EnvironmentBuilder.ImageUpVectorTypes) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setImageUpVectorType(ImageBasedLighting.ImageUpVectorTypes) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setImageWidth(double) - Method in interface nxopen.report.ImageOption
-
License requirements: None.
- setImageWidth(Tag, double) - Method in interface nxopen.uf.UFDrf
-
- setImaginaryExpression(Expression) - Method in interface nxopen.fields.ComplexScalarFieldWrapper
-
Sets the implementation of the wrapper to the specified expressions
License requirements: None.
- setImaginaryExpressions(Expression[]) - Method in interface nxopen.fields.ComplexVectorFieldWrapper
-
Sets the implementation of the wrapper to the specified expressions
License requirements: None.
- setImaginaryOffset(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Sets the offset for imaginary part
License requirements: None.
- setImaginaryScale(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Sets the offset for imaginary part
License requirements: None.
- setImmediateChildren(SessionModeling.ImmediateChildrenType) - Method in interface nxopen.preferences.SessionModeling
-
Sets the immediate children.
- setImmediateChildren(int) - Method in interface nxopen.uf.UFModeling
-
- setImmediateUpdate(UFVariant, boolean) - Method in interface nxopen.uf.UFSim
-
- setImpactMethod(VelocityImpactExcitationBuilder.ImpactMethodType) - Method in interface nxopen.cae.responsesimulation.VelocityImpactExcitationBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setImportable(boolean) - Method in interface nxopen.partfamily.TemplateManager
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setImportAll(boolean) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set import all entities
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setImportBehavior(SolverAppendOption.ImportBehaviorOption) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setImportBlockType(DxfdwgImporter.ImportBlocksAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setImportBoundaries(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setImportCamObjects(boolean) - Method in interface nxopen.PartImporter
-
Sets the Import CAM Objects flag.
- setImportCollisionAvoidance(boolean) - Method in interface nxopen.sim.ArchiveImportBuilder
-
License requirements: None.
- setImportCurvesType(DxfdwgImporter.ImportCurvesAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setImportDimensionType(DxfdwgImporter.ImportDimensionsAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setImportedEefFile(String) - Method in interface nxopen.cae.responsesimulation.SolutionBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setImportedSketch(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setImportedSketch(Sketch) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setImportedSolutionName(String) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
- setImportEntityType(ImportAutocadBlockBuilder.EntityType) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setImportFile(String) - Method in interface nxopen.mechatronics.ECADImportBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setImportFile(String) - Method in interface nxopen.mechatronics.SCOUTImportBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setImportMaterials(boolean) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setImportMaterials(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setImportMethod(LaminateImportedLayupBuilder.ImportMethodEnum) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setImportMode(ImportEclassMappingMode) - Method in interface nxopen.ame.ImportEClassMappingBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setImportMotion(String) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setImportOption(CommandImporter.OverrideOption) - Method in interface nxopen.report.CommandImporter
-
License requirements: None.
- setImportPolylineTo(int) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setImportPolylineTo(DxfdwgImporter.ImportPolylinesAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setImportResult(boolean) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
Import the result immediately
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setImportTo(Catiav5Importer.ImportToOption) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setImportTo(DxfdwgImporter.ImportToEnum) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setImportTo(IgesImporter.ImportToEnum) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setImportTo(ProeImporter.ImportToOption) - Method in interface nxopen.ProeImporter
-
License requirements: None.
- setImportTo(Step203Importer.ImportToOption) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setImportTo(Step214Importer.ImportToOption) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setImportTo(Step242Importer.ImportToOption) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setImportToTeamcenter(boolean) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setImportToTeamcenter(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setImportToTeamcenter(boolean) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setImportToTeamcenter(boolean) - Method in interface nxopen.ProeImporter
-
License requirements: None.
- setImportToTeamcenter(boolean) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setImportToTeamcenter(boolean) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setImportToTeamcenter(boolean) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setImportType(ImportType) - Method in interface nxopen.ame.ManageEclassMappingBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setImportViews(boolean) - Method in interface nxopen.PartImporter
-
Sets the Import Views flag.
- setImprintBothSide(boolean) - Method in interface nxopen.features.TrimSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setImprintData(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Sets the data to be imprinted onto the target plate system.
- setImprintType(ImprintBuilder.ImprintTypes) - Method in interface nxopen.cae.ImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setInaccessibleAreasChecker(boolean) - Method in interface nxopen.features.AnalyzePocketBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setInactiveSketchColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the inactive sketch color
License requirements: None.
- setInApplyStatus(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInApplyStatus(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInchFractionToNearest(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setInclination(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setIncludeAllCategories() - Method in interface nxopen.AttributeIterator
-
Do not restrict searches to attributes with a previously given category.
- setIncludeAlsoUnset(boolean) - Method in interface nxopen.AttributeIterator
-
Widen (or cancel the widening of) searches to attributes that have not been set, but for which the object has associated templates.
- setIncludeBlank(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: None.
- setIncludeBlankedObj(boolean) - Method in interface nxopen.Catiav5Creator
-
License requirements: None.
- setIncludeBlends(boolean) - Method in interface nxopen.features.EditCrossSectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setIncludeBodiesOfSurfaceRegion(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setIncludeComponentParts(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setIncludeComponents(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setIncludeCSYS(boolean) - Method in interface nxopen.Catiav5Creator
-
License requirements: None.
- setIncludeCSYS(boolean) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setIncludedAngle(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIncludeDependentParts(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setIncludeFixture(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setIncludeForearm(boolean) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setIncludeGaskNutBolts(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setIncludeHoles(boolean) - Method in interface nxopen.features.EditCrossSectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setIncludeIndWireFrame(boolean) - Method in interface nxopen.Catiav5Creator
-
License requirements: None.
- setIncludeIndWireFrame(boolean) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setIncludeInstances(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIncludeInternalElement(boolean) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIncludeItersectionsOption(boolean) - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setIncludeLeader(boolean) - Method in interface nxopen.weld.WeldLabelBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setIncludeLowerBound(boolean) - Method in interface nxopen.report.DoubleArgument
-
License requirements: None.
- setIncludeLowerBound(boolean) - Method in interface nxopen.report.IntegerArgument
-
License requirements: None.
- setIncludeMaster(boolean) - Method in interface nxopen.pdm.CaeCloneManager
-
- setIncludeMeanStressEffects(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setIncludeMeasureType(boolean) - Method in interface nxopen.cae.xyplot.AxisLabelStyle
-
License requirements: None.
- setIncludeMidnodes(boolean) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncludeModel(boolean) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
Include nodes and elements
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIncludeModelCurves(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the status of include model curves
License requirements: drafting ("DRAFTING")
.
- setIncludeModelCurves(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
- setIncludeModelCurves(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the status of include model curves.
- setIncludeModelCurvesOption(IncludeModelCurvesOption) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIncludeModelSpace(boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setIncludeNestedAssemblies(boolean) - Method in interface nxopen.annotations.TableColumnBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIncludeNonBrokenWaveLinks(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setIncludeNonManifoldObj(boolean) - Method in interface nxopen.ProeImporter
-
License requirements: None.
- setIncludeNoShowEntity(boolean) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setIncludeOnlyArrays(boolean) - Method in interface nxopen.AttributeIterator
-
Restricts searches to array attributes.
- setIncludeOnlyCategory(String) - Method in interface nxopen.AttributeIterator
-
Restrict searches to attributes with the given category.
- setIncludeOnlyTitle(String) - Method in interface nxopen.AttributeIterator
-
Restrict searches to attributes with the given title.
- setIncludeOnlyType(NXObject.AttributeType) - Method in interface nxopen.AttributeIterator
-
Restrict searches to attributes with the given type.
- setIncludeOnlyUnset(boolean) - Method in interface nxopen.AttributeIterator
-
Restricts (or cancel the restriction of) searches to attributes that have not been set, but for which the object has associated templates.
- setIncludeOption(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setIncludeOverStock(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setIncludeParentheses(boolean) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIncludeParentheses(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIncludeParentheses(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIncludePartialHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIncludePilotScrap(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setIncludePmi(JtCreator.PmiOption) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setIncludePoints(boolean) - Method in interface nxopen.features.OptimizeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setIncludeRelief(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setIncludeRotationAngle(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIncludeRotationAngle(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIncludeRotationSymbol(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder
-
- setIncludeRotationSymbol(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
- setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Sets the rounding type .
- setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Sets the Rounding type of the Sharp edges of bottom face and top face.
- setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Sets the Rounding type of the Sharp edges of bottom face and top face.
- setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Sets the option to round the edges of the louver using the die radius.
- setIncludeRounding(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.
- setIncludeSealer(boolean) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The sealer included or not
License requirements: ugweld ("UG WELD")
.
- setIncludeSeedToggle(boolean) - Method in interface nxopen.geometricutilities.CircularPattern
-
License requirements: None.
- setIncludeSheetBodies(boolean) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setIncludeStock(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setIncludeSubComponents(boolean) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIncludeSubfolders(boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setIncludeSubfolders(boolean) - Method in interface nxopen.annotations.ImportSymbolBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setIncludeSuppressedComponents(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setIncludeUnit(boolean) - Method in interface nxopen.cae.xyplot.AxisLabelStyle
-
License requirements: None.
- setIncludeUpperBound(boolean) - Method in interface nxopen.report.DoubleArgument
-
License requirements: None.
- setIncludeUpperBound(boolean) - Method in interface nxopen.report.IntegerArgument
-
License requirements: None.
- setIncludeWires(boolean) - Method in interface nxopen.AcisImporter
-
License requirements: None.
- setIncludeWireStock(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setIncompatibleResultOption(PostGraphBuilder.IncompatibleResult) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setIncompatibleResultsOption(ResultsCombinationBuilder.IncompatibleResults) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
Set incompatible results option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIncompatibleResultsOption(ResultsEnvelopeBuilder.IncompatibleResults) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
Set incompatible results option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIncompatibleResultsOption(ResultsReductionBuilder.IncompatibleResults) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set incompatible results option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIncompatibleResultsOption(TransientResultsReductionBuilder.IncompatibleResults) - Method in interface nxopen.cae.TransientResultsReductionBuilder
-
Set incompatible results option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIncompleteLevels(BladeCutLevels.IncompleteLevelsTypes) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setInconsistentNormals(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setIncrement(int) - Method in interface nxopen.ame.PageNamingBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setIncrement(int) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setIncrement(double) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setIncrement(double) - Method in interface nxopen.blockstyler.DoubleTable
-
License requirements: None.
- setIncrement(double) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setIncrement(double) - Method in interface nxopen.blockstyler.IntegerTable
-
License requirements: None.
- setIncrement(int) - Method in interface nxopen.cae.ElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.ElementModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setIncrement(int) - Method in interface nxopen.cae.NodeCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.NodeProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.NodeReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.NodeRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.NodesBetweenNodesBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.NodesOnCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(int) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIncrement(double) - Method in interface nxopen.cam.PitchSetting
-
License requirements: cam_base ("CAM BASE")
.
- setIncrement(double) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setIncrement(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setIncrementIDNumberPerReport(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIncrementIsPercentage(boolean) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIncrementValue(double) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIndepDispType(DisplayPropertiesBuilder.IndepDomDispType) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setIndependentDomain(FieldDomain) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
Set Independent Domain
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIndependentDomain(FieldDomain) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
Set Independent Domain
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIndependentDomain(FieldDomain) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set Independent Domain
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIndependentDomainName(String) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
- setIndependentDomainName(String) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
- setIndependentDomainName(String) - Method in interface nxopen.cae.ResultsReductionBuilder
-
- setIndependentValueDivisor(double) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setIndependentValueDivisorOption(boolean) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setIndependentValueShift(double) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setIndependentValueShiftOption(boolean) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setIndependentVariableValues(FieldVariable, double[]) - Method in interface nxopen.fields.FieldEvaluator
-
Sets values at which the Field will be evaluated for this independent variable
FieldVariable
.
- setIndex(int) - Method in interface nxopen.annotations.DatumTargetBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setIndex(int) - Method in interface nxopen.annotations.DatumTargetData
-
Sets the target index.
- setIndex(int) - Method in interface nxopen.annotations.IPmi
-
Sets the index.
- setIndex(int) - Method in interface nxopen.annotations.PmiData
-
Sets the index
License requirements: None.
- setIndex(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setIndex(int) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setIndexDigitsInFunction(int) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setIndexDigitsInLocation(int) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setIndexDigitsInProduct(int) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setIndexDisplay(UFGdt.IndexDisplayType) - Method in interface nxopen.uf.UFGdt
-
- setIndexFormat(HoleTableSettingsLabelBuilder.IndexType) - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIndexIncrementInFunction(int) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setIndexIncrementInLocation(int) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setIndexIncrementInProduct(int) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setIndexListItem(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setIndexSize(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIndicator(String) - Method in interface nxopen.ame.PlcSymbolBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setIndicator(String) - Method in interface nxopen.ame.PlcVendorSymbolBuilder
-
License requirements: None.
- setIndicatorType(FeatureControlFrameIndicatorBuilder.FcfIndicatorType) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setIndicatorType(SearchCriteriaFeatureControlFrameBuilder.IndicatorOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setIndividualDistance(boolean) - Method in interface nxopen.annotations.Centerline2dSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIndividualDistance(boolean) - Method in interface nxopen.annotations.Centerline3dSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIndividualDistance(boolean) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIndividualDistance(boolean) - Method in interface nxopen.annotations.CircleCenterlineSettingsBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setIndividualDistance(boolean) - Method in interface nxopen.annotations.SymmetricalCenterlineSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIndividualExport(boolean) - Method in interface nxopen.cae.FlatPatternsBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setIndividualExtensions(int, double, double) - Method in interface nxopen.annotations.CenterlineBuilder
-
Modifies extensions based on select object index
License requirements: drafting ("DRAFTING")
.
- setInEditMode(boolean) - Method in interface nxopen.drawings.ViewAlignmentBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInertiaCsys(CoordinateSystem) - Method in interface nxopen.motion.LinkMassProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setInfeedLengthType(ThreadTurningBuilder.InfeedLengthTypes) - Method in interface nxopen.cam.ThreadTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setInfeedMode(ThreadTurningBuilder.InfeedModes) - Method in interface nxopen.cam.ThreadTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setInferEdgeOutput(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Sets whether plotted edges reflect onscreen edge appearance.
- setInferElementSize(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setInferElementSize(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setInferLength(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setInferRadius1(boolean) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setInferRadius2(boolean) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setInferredCurveSelection(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setInferredPrimary(boolean) - Method in interface nxopen.drawings.View2dOrientBuilder
-
Sets the option to infer the direction view X vector in 3D space
License requirements: drafting ("DRAFTING")
.
- setInferredResultFile() - Method in interface nxopen.cae.SimResultReference
-
Clear previously specified result file location
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setInferredResultFile() - Method in interface nxopen.cae.SimSolution
-
- setInferredResultFileUnits() - Method in interface nxopen.cae.SimResultReference
-
Clears previously specified result file units
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setInferredResultFileUnits() - Method in interface nxopen.cae.SimSolution
-
- setInferredStatus(InferredDouble.Lock) - Method in interface nxopen.cam.InferredDouble
-
License requirements: cam_base ("CAM BASE")
.
- setInferRelativeToGeometry(boolean) - Method in interface nxopen.annotations.OriginBuilder
-
Infers a relative to geometry associative on commit if no other associativity has been applied
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setInferThickness(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setInferThickness(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setInferThickness(boolean) - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setInferThickness(boolean) - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setInferThickness(boolean) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.
- setInFillPrint(Print3dBuilder.PrintInfillEnum) - Method in interface nxopen.Print3dBuilder
-
License requirements: None.
- setInfiniteExtrusion(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setInfinitePlane(Plane) - Method in interface nxopen.cae.ConvexMeshBuilder
-
- setInfinitePlanes(Plane[]) - Method in interface nxopen.cae.ConvexMeshBuilder
-
The Infinite planes
License requirements: None.
- setInfinitePlaneState(boolean) - Method in interface nxopen.cae.ConvexMeshBuilder
-
- setInfiniteSweep(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setInflationPressureFunction(MotionFunction) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setInflationPressureTypeSelection(TirePropertyCdBuilder.InflationPressureType) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setInformation(String) - Method in interface nxopen.features.CustomFeatureInformationEvent
-
The information about Custom Feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setInformationCheckScope(MWMoldedPartValidationBuilder.CheckScope) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR01(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR02(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR03(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR04(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR05(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR06(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR07(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR08(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR09(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR10(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR11(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationColorR12(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimit(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR01(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR02(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR03(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR04(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR05(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR06(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR07(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR08(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR09(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR10(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR11(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationLowerLimitR12(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationRangeType(MWMoldedPartValidationBuilder.RangeType) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationSharpAngleLimit(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowBoundaryEdges(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR01(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR02(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR03(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR04(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR05(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR06(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR07(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR08(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR09(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR10(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR11(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowRangeR12(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationShowSharpEdges(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUnit(MeasureBodies.AnalysisUnit) - Method in interface nxopen.MeasureBodies
-
License requirements: None.
- setInformationUpperLimit(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR01(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR02(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR03(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR04(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR05(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR06(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR07(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR08(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR09(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR10(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR11(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUpperLimitR12(double) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInformationUseSingleTolerance(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setInfoWindow(boolean) - Method in interface nxopen.MeasureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setInheritanceStatus(boolean) - Method in interface nxopen.cam.InheritableBuilder
-
License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInheritAngle(boolean) - Method in interface nxopen.annotations.AutomaticCenterlineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInheritAngle(boolean) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInheritArrangementFromParent(boolean) - Method in interface nxopen.assemblies.ArrangementsBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setInheritClippingBoundary(boolean) - Method in interface nxopen.drawings.BaseViewStyle
-
The status of inherit clipping boundary, if True the model view's
clipping boundary are inherited when model view is imported onto the drawing, else
the imported model view is placed on the drawing with an Automatic Rectangular Boundary.
- setInheritClippingBoundary(boolean) - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInheritClippingBoundary(boolean) - Method in interface nxopen.preferences.BaseViewPreferences
-
The status of inherit clipping boundary, if True the model view's
clipping boundary are inherited when model view is imported onto the drawing, else
the imported model view is placed on the drawing with an Automatic Rectangular Boundary.
- setInheritDisplayProperties(boolean) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInheritDisplayProperties(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInheritDisplayProperties(boolean) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInheritDisplayProperties(boolean) - Method in interface nxopen.features.WaveDatumBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInheritDisplayProperties(boolean) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
License requirements: None.
- setInheritDisplayProperties(boolean) - Method in interface nxopen.features.WavePointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInheritDisplayProperties(boolean) - Method in interface nxopen.features.WaveSketchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setInherited(boolean) - Method in interface nxopen.cae.DurSpecialistSimulationObject
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setInherited(boolean) - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setInheritedMaterial() - Method in interface nxopen.cae.connections.IMaterial
-
Use this function to set inherited material to connection
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setInheritedPMISource(GeneralArrangementViewBuilder.InheritedPMISourceOption) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setInheritGdt(GdtOption) - Method in interface nxopen.drawings.InheritPmiViewStyle
-
Inherit GD and T option,that let you inherit GD and T display
instances onto the drawing plane or into a drawing member view.
- setInheritGdt(GdtOption) - Method in interface nxopen.preferences.InheritPmiPreferences
-
License requirements: drafting ("DRAFTING")
.
- setInheritModelTogggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setInheritPMI(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInheritPmiMode(PmiOption) - Method in interface nxopen.drawings.InheritPmiViewStyle
-
License requirements: drafting ("DRAFTING")
.
- setInheritPmiMode(PmiOption) - Method in interface nxopen.preferences.InheritPmiPreferences
-
License requirements: drafting ("DRAFTING")
.
- setInheritPmiOntoDrawing(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInheritPmiToDrawing(boolean) - Method in interface nxopen.drawings.InheritPmiViewStyle
-
License requirements: drafting ("DRAFTING")
.
- setInheritPmiToDrawing(boolean) - Method in interface nxopen.preferences.InheritPmiPreferences
-
License requirements: drafting ("DRAFTING")
.
- setInheritPmiTypeMask(int) - Method in interface nxopen.drawings.InheritPmiViewStyle
-
License requirements: drafting ("DRAFTING")
.
- setInheritRadiusFromFace(boolean) - Method in interface nxopen.features.ReplaceBlendBuilder
-
License requirements: None.
- setInheritTip(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setInitialCallout(String) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setInitialColumnWidth(double) - Method in interface nxopen.diagramming.tables.TableBuilder
-
License requirements: None.
- setInitialConditionType(InitialConditions.Type) - Method in interface nxopen.cae.responsesimulation.InitialConditions
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setInitialCopyLocation(Point3d) - Method in interface nxopen.gateway.CopyCutBuilder
-
License requirements: None.
- setInitialDeformationScale(double) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setInitialDeformationScaleType(Result.DeformationScale) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setInitialDeformationUserDefinedResultType(BaseResultType) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setInitialDeformationUserselectionType(Result.InitialDeformationSelection) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setInitialDialogDisplay(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the initial dialog display flag
License requirements: None.
- setInitialDisplacement(double) - Method in interface nxopen.cae.responsesimulation.ModeInitialData
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setInitialDistanceValue(double[]) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Sets the initial distance value.
- setInitialEstimateValue(double) - Method in interface nxopen.cae.FunctionBuilder
-
License requirements: None.
- setInitialLocationAndOrientation(Point, CoordinateSystem) - Method in interface nxopen.assemblies.AddComponentBuilder
-
Sets the location and orientation to be used for adding component.
- setInitialLocationAndOrientation(Point3d, Matrix3x3) - Method in interface nxopen.assemblies.AddComponentBuilder
-
Sets the location and orientation to be used for add component.
- setInitialLocationType(AddComponentBuilder.LocationType) - Method in interface nxopen.assemblies.AddComponentBuilder
-
Set the initial location type during add component.
- setInitialOrientation(Matrix3x3) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setInitialPasteLocation(Point3d) - Method in interface nxopen.SketchPasteBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setInitialPasteLocation(Point3d) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setInitialPasteLocation(Point3d) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setInitialPosition(Point3d) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setInitialPosition(Point3d) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the initial location, this is mainly used to set default add location of a reusable component
License requirements: None.
- setInitialRetractAngle(double) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setInitialRetractDistance(double) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setInitialRetractType(TeachmodeLinearMoveBuilder.InitialRetractTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setInitialSecondaryNumber(String) - Method in interface nxopen.preferences.PartDrafting
-
Sets the initial secondary number
License requirements: None.
- setInitialSecondarySheetNumber(String) - Method in interface nxopen.drawings.DrawingFormatSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInitialSheetNumber(String) - Method in interface nxopen.drawings.DrawingFormatSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInitialSheetNumber(String) - Method in interface nxopen.preferences.PartDrafting
-
Sets the initial sheet number
License requirements: None.
- setInitialShortcuts(int[]) - Method in interface nxopen.blockstyler.Enumeration
-
Sets InitialShortcuts.
- setInitialSpeed(double) - Method in interface nxopen.motion.PMDCMotorBuilder
-
Sets the initial speed
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setInitialStock(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setInitialStock(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setInitialType(NcmHoleMachining.InitialTypes) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setInitialType(NcmPlanarBuilder.InitialTypes) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setInitialType(NcmTransferTypes.InitialTypes) - Method in interface nxopen.cam.NcmTransferTypes
-
License requirements: cam_base ("CAM BASE")
.
- setInitialValue(double) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setInitialValue(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setInitialVelocity(double) - Method in interface nxopen.cae.responsesimulation.ModeInitialData
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setInitJoint(HumanData.InverseKinematicsInitJoint) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setInitVisibility(boolean) - Method in interface nxopen.mechatronics.DisplayChangerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setInline(boolean) - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
License requirements: None.
- setInlineBehavior(boolean) - Method in interface nxopen.mechanicalrouting.ManageInlineBehaviorBuilder
-
Sets true to mark current model element revision as inline design element(which moves along with connected
routing design elements), false for non-inline design element (which has its own position and drives connected
routing design elements.
- setInlineSymbolLocation(Pipe, String, int, double) - Method in interface nxopen.pid.EquipmentBuilder
-
Sets connection location for the inline symbol.
- setInnerCornerTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the inner corner treatment type in Flat as Solid operation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setInnerCornerTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the inner corner treatment type in Flat as Solid operation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setInnerCornerTreatmentValue(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the the inner corner treatment value for Flat as Solid operations
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setInnerCornerTreatmentValue(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the inner corner treatment value for Flat as Solid operations
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setInnerDeckSheet(Body) - Method in interface nxopen.die.DeckParentBuilder
-
Sets the inner deck sheet of deck.
- setInnerDiameter(double) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setInnerDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setInnerDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setInnerDimensionOffsetValue(double) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setInnerJointAsymmetric(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInnerLineType(DynamicCurbBuilder.MethodType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInnerMold(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInnerOuterType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInnerTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setINormal(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInOutType(CamInspectionOperationInneroutertypes) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInPartingCommand(int) - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Set if it is within a parting command.
- setInProcessFeatureType(String) - Method in interface nxopen.cam.Operation
-
Set the in process feature type
License requirements: cam_base ("CAM BASE")
.
- setInputAction(FeatureExtractionBuilder.InputActions) - Method in interface nxopen.facet.FeatureExtractionBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setInputAttributesFilter(String[]) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
The input attributes filter to be searched
License requirements: shape_search ("Shape Search")
.
- setInputAttributesName(String[]) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
The input attributes name to be searched
License requirements: shape_search ("Shape Search")
.
- setInputBodyOption(MergeSubdivisionBodiesBuilder.InputBodyOptions) - Method in interface nxopen.features.subdivision.MergeSubdivisionBodiesBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setInputBodyOption(SplitSubdivisionBodyBuilder.InputBodyOptions) - Method in interface nxopen.features.subdivision.SplitSubdivisionBodyBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setInputChanged(boolean) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setInputCurveOption(StudioSplineBuilder.CurveOption) - Method in interface nxopen.features.StudioSplineBuilder
-
- setInputCurveOption(StudioSplineBuilderEx.InputCurveOptions) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInputCurveOption(CurveOptions.InputCurve) - Method in interface nxopen.geometricutilities.CurveOptions
-
Sets the curve options
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInputCurveOptions(ExtractCagePolylineBuilder.InputCurveOption) - Method in interface nxopen.features.subdivision.ExtractCagePolylineBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setInputCurves(BlendCurve3DBuilder.InputCurvesOption) - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setInputDefinition(PostScenarioInputDefinition) - Method in interface nxopen.cae.PostScenarioBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setInputDirection(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setInputDynaFile(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Sets the input dyna file.
- setInputFeatures(CAMFeature[]) - Method in interface nxopen.cam.GroupFeatures
-
Set the list of input features
License requirements: cam_base ("CAM BASE")
.
- setInputFile(String) - Method in interface nxopen.AcisImporter
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.ASCImporter
-
License requirements: nx_layout ("NX Layout")
.
- setInputFile(String) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setInputFile(String) - Method in interface nxopen.Catiav4Importer
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.Catiav5Creator
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.ProeImporter
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.Step203Creator
-
- setInputFile(String) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.Step214Creator
-
- setInputFile(String) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.tooling.SIZERImportBuilder
-
License requirements: None.
- setInputFile(String) - Method in interface nxopen.weld.WeldImportBuilder
-
License requirements: None.
- setInputFileDir(String) - Method in interface nxopen.cae.connections.ComposerData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setInputFolder(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setInputFolder(String) - Method in interface nxopen.annotations.ImportSymbolBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setInputFormat(InspectionMeasDataBuilder.InputFormatType) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInputMotionType(TransmissibilityEvaluationSettingBuilder.MotionType) - Method in interface nxopen.cae.responsesimulation.TransmissibilityEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setInputName(String) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setInputNode(FENode) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setInputOutput(int) - Method in interface nxopen.mechatronics.AdapterSignalBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setInputParm(double) - Method in interface nxopen.tooling.SubInsertBuilder
-
License requirements: None.
- setInputPart(String) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
License requirements: shape_search ("Shape Search")
.
- setInputPathString(String) - Method in interface nxopen.routing.CompareRunsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setInputPercentX(double) - Method in interface nxopen.diagramming.LocationBuilder
-
License requirements: None.
- setInputPercentY(double) - Method in interface nxopen.diagramming.LocationBuilder
-
License requirements: None.
- setInputs(int) - Method in interface nxopen.features.MapleBuilder
-
- setInputs(int) - Method in interface nxopen.features.MathIntegrationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setInputStatus(BridgeFacetBodyBuilder.Input) - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
License requirements: None.
- setInputStatus(MergeFacetBodyBuilder.Input) - Method in interface nxopen.facet.MergeFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.
- setInputStatus(SewFacetBodyBuilder.Input) - Method in interface nxopen.facet.SewFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.
- setInputType(DieDirectionBuilder.DirectionType) - Method in interface nxopen.die.DieDirectionBuilder
-
License requirements: None.
- setInputType(DieLocationBuilder.LocationType) - Method in interface nxopen.die.DieLocationBuilder
-
License requirements: None.
- setInputType(DiePlaneBuilder.PlaneType) - Method in interface nxopen.die.DiePlaneBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setInputType(UserInput.Type) - Method in interface nxopen.report.UserInput
-
License requirements: None.
- setInputTypeName(String) - Method in interface nxopen.cam.MapFeatureTeaching
-
Sets the selected input type name
License requirements: fbm_author ("FBM Author")
.
- setInputValueX(double) - Method in interface nxopen.diagramming.LocationBuilder
-
License requirements: None.
- setInputValueY(double) - Method in interface nxopen.diagramming.LocationBuilder
-
License requirements: None.
- setInsertGroupMaterial(QuickQuotationBuilder.InsertGroupMaterials) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setInsertionMethod(IFormBuilder.InsertionMethodOptions) - Method in interface nxopen.features.IFormBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setInsertionMethod(CurveShapingBuilder.InsertionMethodOptions) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setInsertionPoint(Point) - Method in interface nxopen.features.TabNoteCfgBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setInsertionPointOption(ImageBaseBuilder.InsertionPoint) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setInsertKnotDirection(StudioXformBuilder.InsertKnotDirectionType) - Method in interface nxopen.features.StudioXformBuilder
-
- setInsertKnotDirection(StudioXformBuilderEx.InsertKnotDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setInsertKnotParameter(int) - Method in interface nxopen.features.StudioXformBuilder
-
- setInsertKnotParameter(int) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setInsertMode(DieInsertBuilder.InsertModeItems) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setInsertNewBlank(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setInsertOnCreate(boolean) - Method in interface nxopen.ame.PlcMethodBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setInsertPosition(TurningToolBuilder.InsertPositions) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setInsertPosition(SpecialPiercingInsertBuilder.InsertPositionTypes) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setInsertShape(GrooveToolBuilder.InsertShapes) - Method in interface nxopen.cam.GrooveToolBuilder
-
License requirements: None.
- setInsertShape(ThreadToolBuilder.InsertShapes) - Method in interface nxopen.cam.ThreadToolBuilder
-
License requirements: None.
- setInsertShape(TurnToolBuilder.InsertShapes) - Method in interface nxopen.cam.TurnToolBuilder
-
License requirements: None.
- setInsertStripTog(boolean) - Method in interface nxopen.tooling.InitProjBuilder
-
License requirements: None.
- setInsertType(SteelInsertBuilder.InsertTypeOption) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the insert type
License requirements: ug_die_design ("Die Design")
.
- setInsertType(SteelInsertSegmentChildBuilder.InsertTypeOption) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Sets the insert type
License requirements: ug_die_design ("Die Design")
.
- setInsertType(SteelInsertSegmentParentBuilder.InsertTypeOption) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Sets the insert type
License requirements: ug_die_design ("Die Design")
.
- setInsertType(BendInsertDesignBuilder.InsertTypeOption) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setInsertType(SpecialFormingBuilder.PunchOrDie) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setInset(AdvancedFlangeBuilder.Insets) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setInset(FlangeBendPropertiesBuilder.Insets) - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setInset(MultiBendBendPropertiesBuilder.Insets) - Method in interface nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setInsetMenuDialogComments(boolean) - Method in interface nxopen.preferences.SessionUserInterface
-
Sets the insert menu/dialog comments flag
License requirements: None.
- setInsetType(BridgeTransitionBuilder.InsetOptions) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setInsetType(FlangeBuilder.InsetTypeOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Sets the inset type (inside, outside, bendoutside) for the flange.
- setInsetType(HemFlangeBuilder.InsetTypeOptions) - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setInsideStandard(MirrorCertificationBuilder.InsideStandardsType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInspectDisplayVolumeFillers(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectDisplayWithExcludeColor(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectExcludeColor(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectExcludeDistance(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectExcludeSharpEdgeResultsDisplay(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectionChangeFacesColor(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectionDate(String) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInspectionDimension(boolean) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the flag indicating whether the dimension is an inspection dimension
License requirements: None.
- setInspectionDimension(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setInspectionDimensionFlag(boolean) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the inspection box displayed around the dimension value.
- setInspectionDisplayFringeColorPlot(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectionDisplayRayVectors(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectionIncludeAllFaces(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectionMode(InspectionMethodBuilder.InspectionModes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInspectionMode(InspectionPathBuilder.InspectModeType) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setInspectionSelectedFacesColor(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectionSymbolAroundAppendedText(InspectionSymbolAroundAppendedText) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setInspectionThicknessFilterRangeHighLimit(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectionThicknessFilterRangeLowLimit(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectionTranslucency(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInspectionUseThicknessRangeSelect(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setInstallDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setInstallFifthDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setInstallFirstDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setInstallFourthDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setInstallOptions(MoldFillingBuilder.InstallOption) - Method in interface nxopen.tooling.MoldFillingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setInstallSecondDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setInstallThirdDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setInstanceBooleanUserAttribute(String, int, boolean, Update.Option) - Method in interface nxopen.assemblies.Component
-
Creates or modifies a boolean attribute with the option to update or not.
- setInstanceDescription(String) - Method in interface nxopen.ame.InstanceDataBlockBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setInstanceDisplayInformation(boolean) - Method in interface nxopen.uf.UFGdt
-
- setInstanceFeatureFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the instance feature face for the hole in the fastener assembly
License requirements: None.
- setInstanceInformation(String, Part, PlcSimAdvClientBuilder.TagInfo[]) - Method in interface nxopen.mechatronics.PlcSimAdvClientBuilder
-
Sets PLCSIMAdv instance information
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setInstanceIntent(Tag, UFAssem.InstanceIntent) - Method in interface nxopen.uf.UFAssem
-
- setInstanceName(String) - Method in interface nxopen.ame.FunctionCallInstanceBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setInstanceName(String) - Method in interface nxopen.ame.InstanceDataBlockBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setInstanceName(String) - Method in interface nxopen.mechatronics.ProfinetClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setInstanceName(String) - Method in interface nxopen.mechatronics.SystemObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setInstanceNameCombo(String) - Method in interface nxopen.routing.InstanceNameLookupBuilder
-
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
- setInstanceNames(Part[], String[]) - Method in interface nxopen.mechatronics.PlcSimAdvClientBuilder
-
Sets PLCSIMAdv instance names
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setInstances(DynamicObjectTableBuilder.Instance[]) - Method in interface nxopen.mechatronics.DynamicObjectTableBuilder
-
Sets all Instances.
- setInstanceTimeUserAttribute(String, int, String, Update.Option) - Method in interface nxopen.assemblies.Component
-
Creates or modifies a time attribute with the option to update or not.
- setInstanceUserAttribute(NXObject.AttributeInformation, Update.Option) - Method in interface nxopen.assemblies.Component
-
Creates or modifies an attribute with the option to update or not.
- setInstanceUserAttribute(String, int, int, Update.Option) - Method in interface nxopen.assemblies.Component
-
Creates or modifies an integer attribute with the option to update or not.
- setInstanceUserAttribute(String, int, double, Update.Option) - Method in interface nxopen.assemblies.Component
-
Creates or modifies a real attribute with the option to update or not.
- setInstanceUserAttribute(String, int, String, Update.Option) - Method in interface nxopen.assemblies.Component
-
Creates or modifies a string attribute with the option to update or not.
- setInstanceUserAttribute(String, int, Update.Option) - Method in interface nxopen.assemblies.Component
-
Creates or modifies a null attribute with the option to update or not.
- setInstanceUserAttributeLock(String, NXObject.AttributeType, boolean) - Method in interface nxopen.assemblies.Component
-
Lock or unlock the given attribute.
- setInstructionFieldPosition(MirrorCertificationBuilder.InstructionFieldPositionType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInstructionFieldType(MirrorCertificationBuilder.InstructionFieldsType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInsulateProfile(boolean) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setInsulation(boolean) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setInt(UFVariant, String, int) - Method in interface nxopen.uf.UFMom
-
- setIntApplicationKey(int) - Method in interface nxopen.features.TrackingData
-
Sets the optional application key of integer type for tracked entity
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setIntArray(UFVariant, String, int, int[]) - Method in interface nxopen.uf.UFMom
-
- setIntArraySize(int) - Method in interface nxopen.motion.LmsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setInteger(int) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInteger(String, int) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the integer value for the given property name.
- setInteger(int, int, int) - Method in interface nxopen.ITableEditorDataProvider
-
Sets integer data at a particular location in the table.
- setInteger(int[], int, int) - Method in interface nxopen.ITableEditorDataProvider
-
Sets integer data on a range of table cells in a specified column.
- setInteger(String, int) - Method in interface nxopen.PropertyContainer
-
Sets the integer value for the given property name.
- setInteger(UFVariant, String, int) - Method in interface nxopen.uf.UFUde
-
- setIntegerArrayPreference(String, int[]) - Method in interface nxopen.preferences.RoutingUserPreferences
-
Sets the values of the named integer array user preference in the current NX session.
- setIntegerArrayPropertyValue(String, int[]) - Method in interface nxopen.BasePropertyTable
-
Sets the integer array value of the property
License requirements: None.
- setIntegerArrayValue(String, int[]) - Method in interface nxopen.cam.CAMObject
-
Set integer array value to the parameter index for the object.
- setIntegerCount(int) - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setIntegerDefault(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIntegerList(String[]) - Method in interface nxopen.AttributeTemplatesBuilder
-
Sets the integer list.
- setIntegerMatrix(String, int, int, int[]) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the integer matrix for the given property name.
- setIntegerMatrix(String, int, int, int[]) - Method in interface nxopen.PropertyContainer
-
Sets the integer matrix for the given property name.
- setIntegerMax(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIntegerMin(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIntegerPrecision(int) - Method in interface nxopen.tooling.BomBuilder
-
License requirements: None.
- setIntegerPreference(String, int) - Method in interface nxopen.preferences.RoutingUserPreferences
-
Sets the value of the named integer user preference in the current NX session.
- setIntegerPropertyValue(String, int) - Method in interface nxopen.BasePropertyTable
-
Sets the integer value of the property
License requirements: None.
- setIntegerQuantity(int) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setIntegerQuantity(Component, int) - Method in interface nxopen.assemblies.ComponentAssembly
-
Sets the integer quantity on this component.
- setIntegers(int[]) - Method in interface nxopen.features.UserDefinedFeatureApplicationField
-
Sets all of the integers stored in this field
License requirements: None.
- setIntegers(int[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Sets all of the integers stored with this UDO
License requirements: None.
- setIntegers(int, int, int[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Replaces the integers stored with this UDO in the specified range with a new array of integers
License requirements: None.
- setIntegerUserAttribute(Tag, String, int, int, boolean) - Method in interface nxopen.uf.UFAttr
-
- setIntegerValue(int) - Method in interface nxopen.annotations.CustomSymbolTextData
-
- setIntegerValue(int) - Method in interface nxopen.annotations.PmiAttributeValueIntegerBuilder
-
License requirements: None.
- setIntegerValue(int) - Method in interface nxopen.annotations.PmiIntegerBuilder
-
License requirements: None.
- setIntegerValue(int) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setIntegerValue(int) - Method in interface nxopen.cam.CAMAttribute
-
Set the feature attribute integer value for an integer type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.
- setIntegerValue(String, int) - Method in interface nxopen.cam.CAMObject
-
Set an integer value to the parameter index for the object.
- setIntegerValue(String, int) - Method in interface nxopen.cam.Cycle
-
Set the integer value of the parameter
License requirements: cam_base ("CAM BASE")
.
- setIntegerValue(int) - Method in interface nxopen.cam.UdeParameter
-
License requirements: cam_base ("CAM BASE")
.
- setIntegerValue(int) - Method in interface nxopen.display.CgfxAttributeValueIntegerBuilder
-
- setIntegerValue(UFCamPref.CamPref, int) - Method in interface nxopen.uf.UFCamPref
-
- setIntegerValueOfAttribute(UFVariant, String, int) - Method in interface nxopen.uf.UFMfm
-
- setIntegerVector(String, int[]) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the integer vector for the given property name.
- setIntegerVector(String, int[]) - Method in interface nxopen.PropertyContainer
-
Sets the integer vector for the given property name.
- setIntegrationMethod(EvaluationParameters.AnalysisIntegrationMethod) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setIntegrationType(MechatronicsBuilder.SolverIntegrationType) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setIntegrationTypeOption(DriverOperation.IntegrationType) - Method in interface nxopen.motion.DriverOperation
-
License requirements: mechanisms ("MECHANISMS")
.
- setIntensity(double) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setIntensity(double) - Method in interface nxopen.display.LightBuilder
-
License requirements: None.
- setIntensity(double) - Method in interface nxopen.Light
-
License requirements: None.
- setIntensityDouble(double) - Method in interface nxopen.display.GlobalIlluminationBuilder
-
License requirements: None.
- setIntent(DeltaMoveBuilder.IntentType) - Method in interface nxopen.cam.DeltaMoveBuilder
-
License requirements: None.
- setIntent(ParamValueIntent) - Method in interface nxopen.cam.InheritableToolDepBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setIntent(InspectionDeltaMoveBuilder.IntentType) - Method in interface nxopen.cam.InspectionDeltaMoveBuilder
-
License requirements: None.
- setInteresectionDirectionOption(TrimCurveBuilder.InteresectionDirectionOptions) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInteresectionMethod(TrimCurveBuilder.InteresectionMethods) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInteresectionOptionVector(Direction) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInterfaceUsageType(InterfaceObject.InterfaceUsageType) - Method in interface nxopen.assemblies.productinterface.InterfaceObject
-
Sets the usage type on the product interface object
License requirements: None.
- setInterfaceUsageType(int) - Method in interface nxopen.assemblies.productinterface.PropertyBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setInterfaceUsageType(int) - Method in interface nxopen.features.PartGeometryCopyBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setInterferenceColor(NXColor) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setInterferenceColor(NXColor) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setInterferenceColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInterferenceFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInterferenceLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInterferenceOption(boolean) - Method in interface nxopen.motion.PostProcess
-
Set interference option for animation/articulation/spreadsheet run
License requirements: mechanisms ("MECHANISMS")
.
- setInterferenceText(DisplayableObject, DisplayableObject, String) - Method in interface nxopen.assemblies.ClearanceSet
-
Associates a text string to an interfering object pair.
- setInterferenceType(SimpleInterference.InterferenceMethod) - Method in interface nxopen.geometricanalysis.SimpleInterference
-
License requirements: None.
- setInterferenceType(ResultMeasure.InterferenceType) - Method in interface nxopen.motion.ResultMeasureBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setInterferenceWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInterferingSolids(CustomViewSettingsBuilder.Interfering) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInterferingSolids(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
- setInterferingSolids(HiddenLineInterferingSolidsOption) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInterferingSolids(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
- setInterferingSolidsOption(HiddenLineInterferingSolidsOption) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the status of interfering solids.
- setInterferingSolidsOption(HiddenLineInterferingSolidsOption) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the status of interfering solids.
- setInterfText(Tag, Tag, Tag, String) - Method in interface nxopen.uf.UFClear
-
- setInteriorCurveType(StyledCornerBuilder.InteriorCurveTypes) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setInteriorCutout(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setInteriorExteriorType(FluidDomainBuilder.IntExtType) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setInteriorFeature(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setInteriorPoint(Point) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setInteriorPoint1(Point) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setInteriorPoint2(Point) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setInteriorPoint3(Point) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setInteriorPosition(Point3d) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Sets the offset surface interior position for specify interior position method.
- setInterLaminarFailureTheory(LaminatePly.InterLaminarFailureTheoryType) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setIntermediateDeck(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder
-
Sets the intermediate deck profile of the deck.
- setIntermediateDeckOrientation(ISurface) - Method in interface nxopen.die.DeckParentBuilder
-
Sets the intermediate deck orientation of the deck.
- setIntermediateDensity(int) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setIntermediateFrequenciesBetweenOption(LaminateSineEventBuilder.IntermediateFrequeciesBetweenEnum) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setIntermediateFrequenciesCluster(double) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setIntermediateFrequenciesEnable(boolean) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setIntermediateFrequenciesIncludeNatFreq(boolean) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
- setIntermediateFrequenciesNumExcitations(int) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setIntermediateFrequenciesNumIncrements(int) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setIntermediateFrequenciesOption(LaminateSineEventBuilder.IntermediateFrequeciesEnum) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setIntermediateNamingRule(String) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setIntermediatePoint(Point) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIntermediateRename(boolean) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setInternal(boolean) - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setInternalBumperLineMethod(PedestrianProtectionBuilder.InternalBumperType) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setInternalFrameAnchorName(String) - Method in interface nxopen.routing.PlatformCreatorBuilder
-
License requirements: routing_platform ("Routing Platform")
.
- setInterNamingRule(String) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setInterpart(boolean) - Method in interface nxopen.features.WrapGeometryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setInterpart(boolean) - Method in interface nxopen.ScCollector
-
Sets inter-part status
This function sets the value of interpart flag on ScCollector.
- setInterpart(boolean) - Method in interface nxopen.Section
-
Set inter-part state of section and make it empty.
- setInterpartData(boolean, LoadOptions.Parent) - Method in interface nxopen.LoadOptions
-
Sets the interpart data option which, when turned on, loads parts that
are mated or contain interpart expressions, as well as those with WAVE data.
- setInterpartDelay(boolean) - Method in interface nxopen.Update
-
License requirements: None.
- setInterpartPositioning(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the option to allow interpart geometry selection in the assembly constraints dialog
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SpecifyPlane
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setInterpartSelectionAsString(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setInterpartSourceEdge(Edge) - Method in interface nxopen.features.AngularDimBuilder
-
Sets the interpart source edge
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setInterpMethod(LaserProfileMove.InterpMethods) - Method in interface nxopen.cam.LaserProfileMove
-
License requirements: cam_base ("CAM BASE")
.
- setInterpolated(boolean) - Method in interface nxopen.cae.ResultParametersWithProbe
-
Set interpolated
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setInterpolation(AfuData.InterpolationType) - Method in interface nxopen.cae.AfuData
-
Sets the interpolation type
License requirements: None.
- setInterpolation(int) - Method in interface nxopen.fields.FieldTable
-
- setInterpolationData(FEElement, DofTerm[], int[]) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets interpolation element associated data.
- setInterpolationMethod(InterpolationMethod) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setInterpolationMethod(ToolAxisInterpolate.InterpolationMethodTypes) - Method in interface nxopen.cam.ToolAxisInterpolate
-
License requirements: cam_base ("CAM BASE")
.
- setInterpolationMethod(SubdivideFacetBodyBuilder.InterpolationMethodType) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setInterpolationMethod(FieldEvaluator.InterpolationEnum) - Method in interface nxopen.fields.FieldEvaluator
-
License requirements: None.
- setInterpolationMethod(FieldEvaluator.InterpolationEnum) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setInterpolationMethodOption(FrequencyDefinition.InterpolationMethod) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setInterpolationOption(SweptBuilder.InterpolationOptions) - Method in interface nxopen.features.SweptBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setInterpResult(UFVariant, String) - Method in interface nxopen.uf.UFDbcMld
-
- setInterpretContactContour(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setInterRenameComp(boolean) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setInterruptionPointLocation(Point2d, PageObject) - Method in interface nxopen.ame.InterruptionPointBuilder
-
Set node location of Interruption Point on page.
- setInterruptionPointName(String) - Method in interface nxopen.ame.InterruptionPointBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setInterruptionPointVariant(InterruptionPointBuilder.Variant) - Method in interface nxopen.ame.InterruptionPointBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setInterruptUpdateOnError(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the option "Interrupt Update on Error" gives choice, whether the user
wants the "Edit During Update" dialog to appear when features contain
errors during feature update/playback.
- setInterruptUpdateOnMissingReferences(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the option "Interrupt Update on Missing References" gives choice, whether the
user wants the "Edit During Update" dialog to appear when features contain
missing references during feature update/playback.
- setInterruptUpdateOnWarning(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the option "Interrupt Update on Warning" gives choice, whether the
user wants the "Edit During Update" dialog to appear when features contain
warnings during feature update/playback.
- setIntersectedObjects(TaggedObject[]) - Method in interface nxopen.display.PlanarShipGridBuilder
-
Set the objects that are to be searched to find intersections with the plane.
- setIntersectionPlaneType(SearchCriteriaFeatureControlFrameBuilder.IntersectionPlaneOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setIntersectionReference(Point) - Method in interface nxopen.geometricutilities.BoundingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setIntersectionSplitSystem(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setIntersectionStrategy(HoleDrillingBuilder.IntersectionStrategyType) - Method in interface nxopen.cam.HoleDrillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setInterSectionsType(ShipIntersectionsBuilder.CreationType) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setIntersectionSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the intersection symbol color, font, and width
License requirements: None.
- setIntersectionSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIntersectionSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIntersectionSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIntersectionTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setIntersectionTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
License requirements: nx_freeform_1 ("basic freeform modeling") OR features_modeling ("FEATURES MODELING")
.
- setIntersectionTolerance(double) - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setIntersectPlane(Plane) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setIntersectType(PlanarShipGridBuilder.IntersectOption) - Method in interface nxopen.display.PlanarShipGridBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setIntersectType(GeodesicIntersectBuilder.Type) - Method in interface nxopen.features.GeodesicIntersectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setInterSolid(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setInterTransFrameEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setInterTransverseFrames(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesExtendBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesExtendColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesExtendFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesExtendFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesExtendLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesExtendWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterTransverseFramesTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setInterval1(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setInterval2(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setIntNumVents(int) - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setIntol(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setIntol(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setIntol(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setIntol(double) - Method in interface nxopen.cam.WedmCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setInTolerance(double) - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setInTolerance(double) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setIntrapartPartModuleDelay(boolean) - Method in interface nxopen.Update
-
License requirements: None.
- setIntroductoryTemplate(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setIntUgAttribute(UFVariant, String, int) - Method in interface nxopen.uf.UFMfm
-
- setIntValue(Expression) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setIntValue(int) - Method in interface nxopen.SpreadsheetCellData
-
License requirements: None.
- setIntValue(Tag, int, int) - Method in interface nxopen.uf.UFParam
-
- setIntVla(Tag, int, int, int[]) - Method in interface nxopen.uf.UFParam
-
- setInvalidSequenceCharacters(String) - Method in interface nxopen.preferences.RoutingPart
-
Sets the list of characters that cannot be used when generating sequences
of terminals in qualify part.
- setInverse(boolean) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setInverseBending(boolean) - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setInverseKinematicsOrientation(Matrix3x3) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setInverseKinematicsPosition(Point3d) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setInverseKinematicsType(HumanData.InverseKinematicsType) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setInvertSymbol(boolean) - Method in interface nxopen.annotations.BaseSurfaceFinish
-
Set the invert symbol flag for symbol having flag type leader.
- setInvertSymbol(boolean) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInvertSymbol(boolean) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setInvertText(boolean) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setInvertText(boolean) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setInvisibleSelection(TaggedObject) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Set the selectable tableEditors selected items
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setInvokeExport(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setIOSetPath(String) - Method in interface nxopen.cae.connections.ComponentData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setIOStatus(boolean) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setIOType(String) - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
License requirements: None.
- setIpwColor(NXColor) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setIpwNeedleCountCoarse(int) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIpwNeedleCountFine(int) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIpwNeedleCountMedium(int) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIpwNeedleDistanceCoarse(double) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIpwNeedleDistanceFine(double) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIpwNeedleDistanceMedium(double) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIpwPartsFolder(String) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIpwPositionCsys(CoordinateSystem) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setIpwPositionType(GeometryGroup.PositionTypes) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setIpwResolution(SimulationOptionsBuilder.Resolution) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setIpwToleranceMode(Preferences.IpwToleranceModeTypes) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIpwType(CutParametersIpwTypes) - Method in interface nxopen.cam.CutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setIpwUseDirectoryOfOriginalPart(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setIRayPlusStudioshowStatusIndicator(boolean) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImageDotsPerInch(int) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImageDoubleHeight(double) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImageDoubleWidth(double) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImageFileFormat(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageFileFormatType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImageLockAspectRatio(boolean) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImageOrientation(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageOrientationType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImagePixelHeight(int) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImagePixelWidth(int) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImageResolution(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageResolutionType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImageSize(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageSizeType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIRayPlusStudioStaticImageUnits(IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageUnitsType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setIs2DMode(boolean) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setIs3DCurves(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setIsBsplineSimplifiedInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the flag indicating whether or not B-Splines are simplified as part of the Flat Solid creation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setIsBsplineSimplifiedInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the flag indicating whether or not B-Splines are simplified as part of the Flat Solid creation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setIsCoreCavityFaceChanged(boolean) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Set the value whether user has changed core/cavity faces or not.
- setIsDirectionFlipped(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Sets a flag indicating if the direction is flipped.
- setIsDragAllowedHandler(Tree.IsDragAllowedCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the callback handler for node drag
License requirements: None.
- setIsDropAllowedHandler(Tree.IsDropAllowedCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the callback handler for node drop
License requirements: None.
- setIsEccentricModeSelected(boolean) - Method in interface nxopen.routing.LinearPathBuilder
-
Set the boolean value specifies that Eccentric mode selected or not
License requirements: routing_base ("Routing Basic")
.
- setIslandCleanup(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setIslandCleanup(boolean) - Method in interface nxopen.cam.PlanarOperationBuilder
-
License requirements: None.
- setIslandCleanupStatus(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setIslandMargin(double) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setIsMeasure(boolean) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Sets IsMeasure flag indicating angle is result of a measure
License requirements: drafting ("DRAFTING")
.
- setIsNewControlPointRequired(boolean) - Method in interface nxopen.routing.LinearPathBuilder
-
Set the boolean value specifies that new control point required or not
License requirements: routing_base ("Routing Basic")
.
- setIsOccurrenceableFlag(boolean) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Sets the is occurrenceable flag for this class.
- setIsoclineAngle(double) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setIsoclineTypes(IsoclineCurveBuilder.CurveTypes) - Method in interface nxopen.features.IsoclineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setIsoclineVector(Direction) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setIsometricView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setIsoparameterLineOriented(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setIsoparametricDirection(SelectDividingObjectBuilder.IsoparametricDirectionType) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setIsoTypeOption(TBSSmoothBuilder.IsoType) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setIsoUShapeControlMethods(StyledCornerBuilder.ShapeControlMethodsTypes) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setIsoValue(double) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setIsoVShapeControlMethods(StyledCornerBuilder.ShapeControlMethodsTypes) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setIsPartSymbol(boolean) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Sets if it is part symbol
License requirements: drafting ("DRAFTING")
.
- setIsReferenceNode(boolean) - Method in interface nxopen.cae.ResultParameters
-
Sets the flag if the reference node will be used for result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setIsSideFlipped(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Sets a value indicating whether to flip the side.
- setIsSmartGroupDateEnabled(Classifier, boolean) - Method in interface nxopen.visualreporting.Rule
-
- setIsStepOkayHandler(Wizard.IsStepOkayCallback) - Method in interface nxopen.blockstyler.Wizard
-
Sets the IsStepOkay handler.
- setIsSystemGeneratedBendReliefRemovedInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the flag indicating whether or not system generated bend releifs are removed as part of the Flat Solid creation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setIsSystemGeneratedBendReliefRemovedInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the flag indicating whether or not system generated bend releifs are removed as part of the Flat Solid creation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setIsTerminalSegment(Terminal) - Method in interface nxopen.routing.ISegment
-
Set given segment to be a terminal segment?
- setIsUPeriodic(int, boolean) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Sets periodicity in U direction of a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setIsVPeriodic(int, boolean) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Sets periodicity in V direction of a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setIswitchDefinition(TirePropertyTnoBuilder.IswitchDefinitionType) - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setItemAttributes(MATLABClientBuilder.TagAttribute[]) - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
Set the attribute of MATLAB items
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setItemAttributes(OPCClientBuilder.TagAttribute[]) - Method in interface nxopen.mechatronics.OPCClientBuilder
-
Set the attribute of OPC items
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setItemChecked(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu
-
Sets the checked status for given menu item
License requirements: None.
- setItemDefault(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu
-
Sets the flag indicating whether the given menu item is default
License requirements: None.
- setItemDescription(String) - Method in interface nxopen.ItemCacheMappedEntityBuilder
-
License requirements: None.
- setItemDialogLaunching(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu
-
Sets the flag indicating whether the given menu item is dialog lanching
License requirements: None.
- setItemDisable(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu
-
Sets the flag indicating whether the given menu item is disabled
License requirements: None.
- setItemFlipFlag(boolean) - Method in interface nxopen.ExpressionCollectorSet
-
License requirements: None.
- setItemFlipFlag(boolean) - Method in interface nxopen.ExpressionSectionSet
-
License requirements: None.
- setItemHidden(int, boolean) - Method in interface nxopen.blockstyler.TreeListMenu
-
Sets the flag indicating whether the given menu item is hidden
License requirements: None.
- setItemIcon(int, String) - Method in interface nxopen.blockstyler.TreeListMenu
-
Sets the icon for given menu item
License requirements: None.
- setItemId(int) - Method in interface nxopen.ItemCacheMappedEntityBuilder
-
License requirements: None.
- setItemID(String) - Method in interface nxopen.mechatronics.ObjectInformationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setItemIndex(int) - Method in interface nxopen.ExpressionCollectorSet
-
License requirements: None.
- setItemIndex(int) - Method in interface nxopen.ExpressionSectionSet
-
License requirements: None.
- setItemIndex(int) - Method in interface nxopen.tooling.FamilyMoldBuilder
-
License requirements: None.
- setItemName(String) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
- setItemName(String) - Method in interface nxopen.annotations.PartIdentificationBuilder
-
License requirements: None.
- setItemName(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
- setItemName(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setItemName(String) - Method in interface nxopen.ItemCacheMappedEntityBuilder
-
License requirements: None.
- setItemName(String) - Method in interface nxopen.mechatronics.ObjectInformationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setItemName(String, String) - Method in interface nxopen.tooling.FastenerAssy
-
Adds item description for the part
License requirements: None.
- setItemName(String) - Method in interface nxopen.tooling.SelectReuseLibraryListBuilder
-
License requirements: None.
- setItemName(int[]) - Method in interface nxopen.tooling.ShimBuilder
-
Sets the item name of Set List
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setItemNameModifier(String) - Method in interface nxopen.annotations.PartIdentificationBuilder
-
License requirements: None.
- setItemNumber(String) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
- setItemNumber(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
- setItemRevisionName(String) - Method in interface nxopen.linedesigner.RenameItemRevisionBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setItemRevisionName(Part, String) - Method in interface nxopen.linedesigner.UINodeUtils
-
To set item revision name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setItems(String[]) - Method in interface nxopen.uistyler.OptionMenu
-
Set an array of items
License requirements: None.
- setItems(String[]) - Method in interface nxopen.uistyler.OptionToggle
-
Sets items in the array
License requirements: None.
- setItemSelection(int, TaggedObject) - Method in interface nxopen.routing.PlacePartBuilder
-
Set a flag which tells the builder from where the part being placed was selected and the tag of the selected part.
- setItemText(UIBlock, String[]) - Method in interface nxopen.blockstyler.SetList
-
Sets the text for the specified item.
- setItemText(int, String) - Method in interface nxopen.blockstyler.TreeListMenu
-
Sets the display text for given menu item
License requirements: None.
- setItemType(MarkAsTemplateBuilder.ItemTypeEnum) - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
License requirements: drafting ("DRAFTING")
.
- setItemType(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setItemType(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setItemType(String) - Method in interface nxopen.pdm.PartOperationCreateBuilder
-
Sets the selected Item Type
License requirements: None.
- setItemType(RunItem.Type) - Method in interface nxopen.routing.RunItem
-
Sets the Run Item type such as "From", "To", or "Member" item.
- setItemType(String, String) - Method in interface nxopen.uf.UFClone
-
- setItemTypes(String) - Method in interface nxopen.mechatronics.ObjectInformationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setItemValue(int) - Method in interface nxopen.uistyler.ColorTool
-
Sets the item value
License requirements: None.
- setItemValue(int) - Method in interface nxopen.uistyler.IntegerItem
-
Sets the value obtained from the text field.
- setItemValue(int) - Method in interface nxopen.uistyler.IntegerScale
-
Sets
License requirements: None.
- setItemValue(int) - Method in interface nxopen.uistyler.OptionMenu
-
Sets the item value
License requirements: None.
- setItemValue(int, boolean) - Method in interface nxopen.uistyler.OptionToggle
-
Sets item value
License requirements: None.
- setItemValue(int) - Method in interface nxopen.uistyler.RadioBox
-
Sets the item value
License requirements: None.
- setItemValue(double) - Method in interface nxopen.uistyler.RealItem
-
Sets the item value
License requirements: None.
- setItemValue(double) - Method in interface nxopen.uistyler.RealScale
-
Sets the item value
License requirements: None.
- setItemValue(String) - Method in interface nxopen.uistyler.StringItem
-
Sets the string value for this dialog item.
- setItemValue(boolean) - Method in interface nxopen.uistyler.Toggle
-
Sets an item value
License requirements: None.
- setItemValue(int) - Method in interface nxopen.uistyler.ToolPalette
-
Sets the currently selected choice for this dialog item.
- setItemValue(String) - Method in interface nxopen.uistyler.WideString
-
Sets the string value for this dialog item.
- setItemValues(String[]) - Method in interface nxopen.uistyler.MultiTextBox
-
Specifies the text for this dialog item.
- setIteration(int) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setIteration(int) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setIteration(BaseIteration) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The iteration containing the grid point force results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setIteration(ResultProbeBuilder.IterationSelection) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIteration(int) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIteration(int) - Method in interface nxopen.facet.MultiPatchAlignmentBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setIterationCount(int) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setIterationIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIterationNumbers(int) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setIterationStepSpacing(int) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setIterationTypeOption(ResultProbeBuilder.IterationType) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIterationValue(double) - Method in interface nxopen.cae.ResultParametersWithProbe
-
Set interpolated iteration value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setIterationValueOption(PostGraphAcrossIterationsBuilder.IterationLabelingOption) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setIterationVariable(PostScenarioVariable) - Method in interface nxopen.cae.PostScenarioSelectionParameters
-
Specifies which selection variable will be used for the next and previous quick-navigation commands.
- setIterativeMax(int) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIterativeMethodSelectionType(CallMethodRuleBuilder.CreationType) - Method in interface nxopen.ame.CallMethodRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setIterativeRotation(double) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIterativeToggle(boolean) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
- setIterativeTranslation(double) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIterativeType(InspectionAlignmentAssistantBuilder.IterativeTypes) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIterConvergeVar(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIterDev(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIterDevType(InspectionAlignmentBuilder.IterDevTypes) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIterGroupName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIterMax(int) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setIterNearValue(double) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setJ(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: None.
- setJacobian(double) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJacobianToggle(boolean) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJacobianValue(double) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJama(boolean) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setJama(boolean) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setJCurve(NXObject[]) - Method in interface nxopen.motion.CurveOnCurveBuilder
-
Sets second curves
License requirements: mechanisms ("MECHANISMS")
.
- setJDirectionBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setJerkLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setJLine(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setJNormal(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setJobName(String) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setJobRunInForeground(boolean) - Method in interface nxopen.cae.optimization.TBSOutputControlOptions
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setJoggle(EmbossJoggle) - Method in interface nxopen.features.EmbossSidewall
-
Sets the sidewall joggle
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setJoggleCompensation(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setJoggleDepthThreshold(boolean, String) - Method in interface nxopen.preferences.PartAeroSheetmetal
-
THE joggle depth threshold value
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setJoggleDistanceThreshold(boolean, String) - Method in interface nxopen.preferences.PartAeroSheetmetal
-
THE joggle distance threshold value
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setJoggleIn(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setJoggleOffsetRadius(boolean, String) - Method in interface nxopen.preferences.PartAeroSheetmetal
-
The joggle offset radius value
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setJoggleStationaryRadius(boolean, String) - Method in interface nxopen.preferences.PartAeroSheetmetal
-
THE joggle stationary radius value string
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setJogWall(boolean) - Method in interface nxopen.die.MachineReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setJoinCurves(boolean) - Method in interface nxopen.SketchIntersectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setJoinedSelectedCurves(Curve[]) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Set the joined trimming curves.
- setJoinIsocline(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setJoinOption(CompositeCurveBuilder.JoinMethod) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setJoinOutputCurves(boolean) - Method in interface nxopen.die.CompensateRoughDataBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setJoint(PhysicsJoint) - Method in interface nxopen.mechatronics.BreakingConstraintBuilder
-
Sets the joint.
- setJoint(Tag, UFMotion.Joint) - Method in interface nxopen.uf.UFMotion
-
- setJointAngleReport(boolean) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setJointChanged(Curve, boolean) - Method in interface nxopen.weld.WeldJointBuilder
-
Indicate that joint was changed.
- setJointCoupler(Tag, UFMotion.JointCoupler) - Method in interface nxopen.uf.UFMotion
-
- setJointData(HumanData.JointType, double, double, double, boolean) - Method in interface nxopen.features.HumanBuilder
-
Set joint data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setJointLimits(HumanData.JointType, double, double, double, double, double, double, boolean) - Method in interface nxopen.features.HumanBuilder
-
Set joint limits
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setJointLimits(Tag, UFMotion.JointLimits) - Method in interface nxopen.uf.UFMotion
-
- setJointMethod(ElectrodeBlankBuilder.JointObject) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setJointMotionInput(Tag, UFMotion.JointMotionInput) - Method in interface nxopen.uf.UFMotion
-
- setJointPrefix(String) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setJointsLimits(boolean) - Method in interface nxopen.motion.ArticulationControl
-
License requirements: mechanisms ("MECHANISMS")
.
- setJointsLimits(boolean) - Method in interface nxopen.motion.SpreadsheetRunControl
-
License requirements: mechanisms ("MECHANISMS")
.
- setJointType(JointDefine.Type) - Method in interface nxopen.motion.JointDefine
-
Sets the joint type
License requirements: mechanisms ("MECHANISMS")
.
- setJointWizardStatus(MotionEnvironment.JointWizardStatus) - Method in interface nxopen.motion.MotionEnvironment
-
Sets the on-off status of joint wizard
License requirements: mechanisms ("MECHANISMS")
.
- setJounceDistance(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setJournalFileFormat(SessionUserInterface.JournalFileFormatType) - Method in interface nxopen.preferences.SessionUserInterface
-
Sets the journal file format
License requirements: None.
- setJournaling(boolean) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setJournalLanguage(SessionUserInterface.JournalLanguageType) - Method in interface nxopen.preferences.SessionUserInterface
-
Sets the journal language.
- setJournalState(int) - Method in interface nxopen.uf.UFPs
-
- setJtdatasetname(String) - Method in interface nxopen.cae.PostJtExportBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setJtfilename(String) - Method in interface nxopen.cae.PostJtExportBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setJtfileStructure(JtCreator.FileStructure) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setJTGeometryTolerance(double) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setJTPartNameAttribute(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setJtParts(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setJtUpdateFromSource(SessionPdm.JtUpdateFromSourceType) - Method in interface nxopen.preferences.SessionPdm
-
License requirements: None.
- setJtWrite(JtCreator.FileWrite) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setJumperGap(double) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setJumperPriority(DiagrammingJumperprioritytype) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setJumperPriorityUseLineType(boolean) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setJumperType(DiagrammingJumpertype) - Method in interface nxopen.diagramming.SheetBuilder
-
License requirements: None.
- setJumperType(DiagrammingJumpertype) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setJumpLabel(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setJumpVelocity(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setJunction(boolean) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunction(KinematicJunction) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setJunction1SelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunction1SpiderScale(double) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunction1SpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunction2SelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunction2SpiderScale(double) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunction2SpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunctionName(String) - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setJunctionRepresentationStyle(AmeJunctionRepresentationStyleType) - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setJunctionSelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunctionSpiderScale(double) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunctionSpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJunctionTolerance(double) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setJustification(PlotBuilder.JustificationOption) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setK(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: None.
- setKDirectionBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setKeepAllContinuity(boolean) - Method in interface nxopen.features.StudioXformBuilder
-
- setKeepAllContinuity(boolean) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setKeepAssociation(boolean) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setKeepBaseLength(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepCircuit(boolean) - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setKeepConnectionOnMove(boolean) - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setKeepConstraintsOption(boolean) - Method in interface nxopen.assemblies.AddComponentBuilder
-
Sets the keep constraints option for added components.
- setKeepCoordSystem(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepCoordSystem(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepCoordSystem(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepCoordSystem(boolean) - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepDiscardMethod(TrimSheetBuilder.KeepDiscardOption) - Method in interface nxopen.features.TrimSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepDrawingOpen(boolean) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setKeepEditedPartsOpen(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setKeepEndPlane(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepFace(boolean) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepFeatureToReplace(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
- setKeepFreeMeshes(boolean) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setKeepGuide(boolean) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepHeelPoint(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepImprintedEdges(boolean) - Method in interface nxopen.features.SplitBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepInternalEdgesOption(boolean) - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setKeepInvalidElems(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setKeepItemType(boolean) - Method in interface nxopen.tooling.CloneObject
-
Uses the item type which is same as original source item.
- setKeepOppositeSurface(boolean) - Method in interface nxopen.features.SnipSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setKeepOrDiscard(TrimCurve2Builder.KeepDiscard) - Method in interface nxopen.features.TrimCurve2Builder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepOriginal(boolean) - Method in interface nxopen.features.UnsewBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepOriginal(boolean) - Method in interface nxopen.tooling.SplitInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setKeepOriginalDesignElement(boolean) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setKeepOrthogonal(boolean) - Method in interface nxopen.features.LocalScaleCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setKeepOrthogonal(boolean) - Method in interface nxopen.features.MoveCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setKeepOrthogonal(boolean) - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setKeepOrthogonal(boolean) - Method in interface nxopen.features.ResizeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepParameterization(boolean) - Method in interface nxopen.features.VariableOffsetBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setKeepPlacementPlane(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepRadFixed(boolean) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setKeepRadiusFixed(boolean) - Method in interface nxopen.features.sheetmetal.ResizeBendAngleBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setKeepRadiusFixed(boolean) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setKeepReferencePlane(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepRemoveTargetMethod(BooleanRegionSelect.KeepRemoveOption) - Method in interface nxopen.geometricutilities.BooleanRegionSelect
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepRemoveToolMethod(BooleanRegionSelect.KeepRemoveOption) - Method in interface nxopen.geometricutilities.BooleanRegionSelect
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepReverseDirection1(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepReverseDirection2(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepReverseEndOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepReverseGuideOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepReverseLine1Offset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepReverseLine2Offset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepReverseStartOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSectionGuide(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectCSYSFace(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectCSYSFace(boolean) - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelected(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setKeepSelectEndTrim(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectFace(boolean) - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectGuideCurve(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectGuideCurve(boolean) - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectLine1(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectLine1(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectLine2(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectLine2(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectOrientationLine(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectProfileBody(boolean) - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectStartTrim(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectTargetFace(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectTargetFace(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectTargetFace(boolean) - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSelectTrimFace(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepSheet(boolean) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setKeepSheet(boolean) - Method in interface nxopen.tooling.AssignPatchBuilder
-
License requirements: None.
- setKeepSize(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setKeepSize(boolean) - Method in interface nxopen.tooling.ElectrodeDeleteBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setKeepStartPlane(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setKeepTangent(int) - Method in interface nxopen.features.LocalScaleCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setKeepTangent(int) - Method in interface nxopen.features.MoveCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setKeepTangent(int) - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setKeepTargets(boolean) - Method in interface nxopen.features.EmbossBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepTools(boolean) - Method in interface nxopen.features.EmbossBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setKeepWallThickness(boolean) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setKeepZValueInSameMSet(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setKeyField(boolean) - Method in interface nxopen.annotations.TableColumnBuilder
-
License requirements: drafting ("DRAFTING")
.
- setKeywords(String) - Method in interface nxopen.visualreporting.VisualReport
-
Sets a comma separated string of the keywords for this
VisualReport
.
- setKeywordsOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setKeywordText(Tag, String, String) - Method in interface nxopen.uf.UFGdt
-
- setKFactor(String) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
- setKinematicModel(SimDebugBuilder.KinematicModelType) - Method in interface nxopen.sim.SimDebugBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setKitName(String) - Method in interface nxopen.sim.ExportMachineKitBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setKLine(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setKNormal(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setKnotDisplayState(boolean) - Method in interface nxopen.DisplayModification
-
Sets the flag for knot display.
- setKnotPointMethod(DivideCurveBuilder.KnotPointOption) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setKnotPointNumber(int) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setKnots(double[]) - Method in interface nxopen.features.StudioSplineBuilder
-
- setKnots(double[]) - Method in interface nxopen.features.StudioSplineBuilderEx
-
Sets the optional knot sequence for by pole spline
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setKnowledgeFusionClassName(String) - Method in interface nxopen.annotations.PmiAttributeBuilder
-
License requirements: None.
- setKnuckledProfile(boolean) - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setKnuckleEdges(Edge[]) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Sets the knuckle edges, which include edges for both bend and split types.
- setKnuckleEdges(TaggedObject[]) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Sets the knuckle edges, which includes edges for both bend and split types.
- setKnuckleLocationTolerance(double) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setKnuckleLocationTolerance(double) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setKnuckleOption(StiffenerBuilder.KnuckleOptions) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setKnuckleRatio(double) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setKnuckleSmoothAngle(double) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setKrxFile(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setKt1(double) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setKt2(double) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setKt3(double) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setKv(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setL1Limit(SeatBeltAnchorageBuilder.LOneLimitType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setL2Limit(SeatBeltAnchorageBuilder.LTwoLimitType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLabel(String) - Method in interface nxopen.annotations.DatumData
-
Sets the label
License requirements: None.
- setLabel(String) - Method in interface nxopen.annotations.DatumTargetBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setLabel(String) - Method in interface nxopen.annotations.IDatum
-
Sets the label.
- setLabel(String) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setLabel(String) - Method in interface nxopen.annotations.TitleBlockCellBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabel(String) - Method in interface nxopen.blockstyler.UIBlock
-
License requirements: None.
- setLabel(int) - Method in interface nxopen.cae.AutoBCBuilder
-
Sets the initial label of
CaeRegion
and
SimBC
objects
License requirements: None.
- setLabel(int) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.CaeDOFSet
-
Sets the label of the CaeDOFSet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLabel(int) - Method in interface nxopen.cae.CaeGroup
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLabel(int) - Method in interface nxopen.cae.ElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.ElementModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.LaminateGlobalLayup
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setLabel(int) - Method in interface nxopen.cae.NamedPropertyTable
-
Sets the label of the named property table holder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.NodeCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.NodeProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.NodeReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.NodeRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.NodesBetweenNodesBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.NodesOnCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.cae.SimConstraintSetBuilder
-
License requirements: None.
- setLabel(int) - Method in interface nxopen.cae.SingleLabelSelectionRecipe
-
Set the Node Label.
- setLabel(int) - Method in interface nxopen.cae.SpiderElementBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabel(int) - Method in interface nxopen.CoordinateSystem
-
License requirements: None.
- setLabel(String) - Method in interface nxopen.diagramming.TitleBlockCellBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabel(String) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setLabel(String) - Method in interface nxopen.uistyler.CollapsibleGroup
-
Sets label of collapsible group
License requirements: None.
- setLabel(String) - Method in interface nxopen.uistyler.GroupBox
-
License requirements: None.
- setLabel(String) - Method in interface nxopen.uistyler.IntegerItem
-
Specifies descriptive text to display for the dialog item.
- setLabel(String) - Method in interface nxopen.uistyler.LabelItem
-
Specifies descriptive text to display for the dialog item.
- setLabel(String) - Method in interface nxopen.uistyler.MultiTextBox
-
Specifies descriptive text to display for the dialog item.
- setLabel(String) - Method in interface nxopen.uistyler.OptionMenu
-
Sets label
License requirements: None.
- setLabel(String) - Method in interface nxopen.uistyler.OptionToggle
-
Sets label
License requirements: None.
- setLabel(String) - Method in interface nxopen.uistyler.PropertyPage
-
Specifies descriptive text to display for the dialog item.
- setLabel(String) - Method in interface nxopen.uistyler.PushButton
-
Specifies descriptive text to display for the dialog item.
- setLabel(String) - Method in interface nxopen.uistyler.RadioBox
-
Sets label
License requirements: None.
- setLabel(String) - Method in interface nxopen.uistyler.RealItem
-
Set the label
License requirements: None.
- setLabel(String) - Method in interface nxopen.uistyler.SelectionBox
-
Specifies the descriptive text string to display below the scrolled list and above the text field.
- setLabel(String) - Method in interface nxopen.uistyler.StringItem
-
Specifies descriptive text to display for the dialog item.
- setLabel(String) - Method in interface nxopen.uistyler.Toggle
-
Sets the label to display on the right side of the toggle button.
- setLabel(String) - Method in interface nxopen.uistyler.ToolPalette
-
Specifies descriptive text to display for the dialog item.
- setLabel(String) - Method in interface nxopen.uistyler.WideString
-
Specifies descriptive text to display for the dialog item.
- setLabelCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelColor(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setLabelColor(int) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setLabelColor(NXColor) - Method in interface nxopen.display.PlanarShipGridBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setLabelColor(int) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setLabelDisplayed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLabelDisplayOption(GapFlushnessBuilder.DisplayOptions) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLabelDisplayType(PlanarShipGridBuilder.LabelDisplayOption) - Method in interface nxopen.display.PlanarShipGridBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setLabelFont(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setLabelFont(int) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setLabelFont(int) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setLabelFont(int) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setLabelFont(int) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelHeight(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setLabelHeight(double) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setLabelHeight(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setLabelHeight(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelIncrement(int) - Method in interface nxopen.cae.MultipleElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelIncrement(int) - Method in interface nxopen.cae.MultipleNodeCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setLabelItalicized(boolean) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setLabelItalicized(boolean) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelLocation(SectionLineStyleBuilder.LabelLocationStyle) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setLabelLocation(ViewSectionLineBuilder.LocationType) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelName(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setLabelName(String) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setLabelOffsets(int, int, int) - Method in interface nxopen.cae.FEModelOccurrence
-
- setLabelOnParent(DetailViewBuilder.LabelOnParentType) - Method in interface nxopen.drawings.DetailViewBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelOption(ElementModifyLabelBuilder.LabelType) - Method in interface nxopen.cae.ElementModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelOption(ElementProjectBuilder.LabelType) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelOption(ElementReflectBuilder.LabelType) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelOption(ElementRotateBuilder.LabelType) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelOption(ElementTranslateBuilder.LabelType) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelOption(NodeModifyLabelBuilder.LabelType) - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelOption(NodeProjectBuilder.LabelType) - Method in interface nxopen.cae.NodeProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelOption(NodeReflectBuilder.LabelType) - Method in interface nxopen.cae.NodeReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelOption(NodeRotateBuilder.LabelType) - Method in interface nxopen.cae.NodeRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelOption(NodeTranslateBuilder.LabelType) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLabelParentDisplay(ViewDetailLabelBuilder.LabelParentDisplayTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelPosition(LabelPositionTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelPosition(LabelPositionTypes) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelPosition(LabelPositionTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelPrefix(String) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelPrefix(String) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelPrefix(String) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelRanges(int[], int[], int[], int[]) - Method in interface nxopen.cae.LabelRangeSelectionRecipe
-
Set the labels and label ranges.
- setLabelReference(BoundedGridBuilder.LabelReferenceType) - Method in interface nxopen.display.BoundedGridBuilder
-
License requirements: None.
- setLabels(String, String) - Method in interface nxopen.uistyler.IntegerScale
-
Specifies the text for the minimum and maximum label.
- setLabels(String, String) - Method in interface nxopen.uistyler.RealScale
-
Sets labels
License requirements: None.
- setLabelSettingInheritted(boolean) - Method in interface nxopen.display.PlanarShipGridBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setLabelsToSkip(String) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setLabelsToSkip(String) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLabelString(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SelectElement
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SelectNode
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyLocation
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyPlane
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setLabelString(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setLabelVisibility(boolean) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setLabelVisibility(boolean) - Method in interface nxopen.blockstyler.LineWidth
-
License requirements: None.
- setLabelWidth(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setLabelWidth(int) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setLabelWidth(int) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLaminarSlits(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLamPptSelect(int) - Method in interface nxopen.cae.GlobalLayupImportFromPptBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setLanguage(ProgramInformation.LanguageType) - Method in interface nxopen.report.ProgramInformation
-
License requirements: None.
- setLargeAssemblyStepThreshold(int) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLastCut(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setLastCutMode(Cycle.CutMode) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setLastCuttingEdge(double) - Method in interface nxopen.cam.TurnCutterClearance
-
License requirements: cam_base ("CAM BASE")
.
- setLastCutValue(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setLastIteration(BaseIteration) - Method in interface nxopen.cae.TransientResultsReductionBuilder
-
The last iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLastLimitPoint(Point3d) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the last limit point.
- setLastSelectedLoopIndex(int) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLastSelectedLoopIndex(int) - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Sets the loop index for the last selected loop which contains the last selected edge.
- setLastSelectedNode(NavigatorNode) - Method in interface nxopen.shipdesign.NavigatorView
-
Sets last selected node.
- setLateralEffects(boolean) - Method in interface nxopen.motion.TirePropertyHighOrderParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setLateralForceType(TirePropertyBasicParameters.CorneringType) - Method in interface nxopen.motion.TirePropertyBasicParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setLatheWorkPlaneType(TurnOrientGeomBuilder.LatheWorkPlaneTypes) - Method in interface nxopen.cam.TurnOrientGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLatitudeScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setLatticeAreaColor(double[]) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Sets the lattice area color
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLatticeDataOption(boolean) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setLatticeType(LatticeBuilder.LatticeTypes) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setLawControlConstantDepth(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a constant radius for the depth law control of the conic section with face blend.
- setLawControlConstantFirstOffset(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a constant radius for the first law control of the conic section with face blend.
- setLawControlConstantRadius(String) - Method in interface nxopen.geometricutilities.CircularCrossSection
-
Sets a constant radius for the law control of the circular section with face blend.
- setLawControlConstantRho(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a constant radius for the rho law control of the conic section with face blend.
- setLawControlConstantSecondOffset(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a constant radius for the second law control of the conic section with face blend.
- setLawControlConstantShapeSkew(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a constant radius for the shape skew law control of the conic section with face blend.
- setLawControlDepthEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a end radius for the depth law control of the conic section with face blend.
- setLawControlDepthStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a start radius for the depth law control of the conic section with face blend.
- setLawControlEndRadius(String) - Method in interface nxopen.geometricutilities.CircularCrossSection
-
Sets a end radius for the law control of the circular section with face blend.
- setLawControlFirstOffsetEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a end radius for the first law control of the conic section with face blend.
- setLawControlFirstOffsetStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a start radius for the first law control of the conic section with face blend.
- setLawControlRhoEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a end radius for the rho law control of the conic section with face blend.
- setLawControlRhoStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a start radius for the rho law control of the conic section with face blend.
- setLawControlSecondOffsetEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a end radius for the second law control of the conic section with face blend.
- setLawControlSecondOffsetStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a start radius for the second law control of the conic section with face blend.
- setLawControlShapeSkewEndRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a end radius for the shape skew law control of the conic section with face blend.
- setLawControlShapeSkewStartRadius(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Sets a start radius for the shape skew law control of the conic section with face blend.
- setLawControlStartRadius(String) - Method in interface nxopen.geometricutilities.CircularCrossSection
-
Sets a start radius for the law control of the circular section with face blend.
- setLawCurveOption(LawBuilder.RetainLawCurveOption) - Method in interface nxopen.geometricutilities.LawBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setLawString(Section) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setLawStringFlip(boolean) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setLawType(LawBuilder.Type) - Method in interface nxopen.geometricutilities.LawBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setLawValueAtPoint(String) - Method in interface nxopen.geometricutilities.SpinePointData
-
Sets the law value at the specified point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setLaydownCurve(boolean) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setLaydownCurve(boolean) - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setLayer(int) - Method in interface nxopen.assemblies.AddComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setLayer(int) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setLayer(int) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setLayer(int) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setLayer(int) - Method in interface nxopen.cae.PostJtExportBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setLayer(int) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLayer(int) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLayer(int) - Method in interface nxopen.cam.InspectionSaveToLayerBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLayer(int) - Method in interface nxopen.cam.NcmctPartMountingBuilder
-
License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setLayer(int) - Method in interface nxopen.display.LayerSettingsBuilder
-
License requirements: None.
- setLayer(int) - Method in interface nxopen.DisplayableObject
-
License requirements: None.
- setLayer(int) - Method in interface nxopen.features.MoveObjectBuilder
-
License requirements: None.
- setLayer(int) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setLayer(int) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setLayer(int) - Method in interface nxopen.preferences.RoutingPart
-
Sets the layer to apply to new components.
- setLayer(int) - Method in interface nxopen.tooling.MWCopySheetsBuilder
-
License requirements: None.
- setLayer(int) - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setLayer(int) - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setLayer(Tag, int) - Method in interface nxopen.uf.UFObj
-
- setLayerAllowHidden(Tag, int) - Method in interface nxopen.uf.UFObj
-
- setLayerDefault(int) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setLayerDefault(int) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setLayerDefault(int) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setLayerMask(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setLayerMask(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setLayerMask(String) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setLayerMask(String) - Method in interface nxopen.Step203Creator
-
- setLayerMask(String) - Method in interface nxopen.Step214Creator
-
- setLayerMask(String) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setLayerNumber(int) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setLayerNumber(int) - Method in interface nxopen.PasteSpecialBuilder
-
License requirements: None.
- setLayerNumber(int) - Method in interface nxopen.userdefinedtemplate.InstantiationBuilder
-
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- setLayerOpt(PasteSpecialBuilder.LayerOption) - Method in interface nxopen.PasteSpecialBuilder
-
License requirements: None.
- setLayerOption(AssembliesGeneralPropertiesBuilder.LayerOptions) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setLayerOption(int) - Method in interface nxopen.assemblies.Component
-
Sets the layer option.
- setLayerOption(CreateNewComponentBuilder.ComponentLayerOptionType) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setLayerOption(DesignElementBuilder.LayerOptionType) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setLayerOption(int) - Method in interface nxopen.blockstyler.LayerBlock
-
License requirements: None.
- setLayerOption(LayerSettingsBuilder.LayerOptionType) - Method in interface nxopen.display.LayerSettingsBuilder
-
License requirements: None.
- setLayerOption(MoveObjectBuilder.LayerOptionType) - Method in interface nxopen.features.MoveObjectBuilder
-
License requirements: None.
- setLayerOption(AddSubmechanismBuilder.Layer) - Method in interface nxopen.motion.AddSubmechanismBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setLayerOption(PartImporter.LayerOptionType) - Method in interface nxopen.PartImporter
-
Sets the layer option.
- setLayerOption(AddReusableFeatureBuilder.LayerOptionType) - Method in interface nxopen.tooling.AddReusableFeatureBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setLayerOption(InstantiationBuilder.JaUserdefinedtemplateLayerOption) - Method in interface nxopen.userdefinedtemplate.InstantiationBuilder
-
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- setLayerOptions(NcmctPartMountingBuilder.LayerTypes) - Method in interface nxopen.cam.NcmctPartMountingBuilder
-
License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setLayers(int) - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLayers(int) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setLayerSelection(int) - Method in interface nxopen.cae.responsesimulation.DataLocation
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setLayersOptions(PartVisualizationEmphasis.LayersOptions) - Method in interface nxopen.preferences.PartVisualizationEmphasis
-
Modifies options that control the appearance of de-emphasized
shaded geometry when the See-Thru style is set to Layers.
- setLayerValue(int) - Method in interface nxopen.blockstyler.LayerBlock
-
License requirements: None.
- setLayout(DrawingSheetBuilder.LayoutOptions) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLayoutAsString(String) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setLayoutAsString(String) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setLayoutAsString(String) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setLayoutAsString(String) - Method in interface nxopen.blockstyler.TextColorFontWidth
-
License requirements: None.
- setLayoutChanged(boolean) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Flag indicating whether layout changed.
- setLayoutChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Flag indicating whether layout changed.
- setLayoutFileName(String) - Method in interface nxopen.ame.ReportTemplateBuilder
-
License requirements: None.
- setLayoutFlange(boolean) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the layout flange setting of the pierce task.
- setLayoutFlange(boolean) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the layout flange setting of the trim task.
- setLayoutFlange(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setLayoutName(String) - Method in interface nxopen.cam.LayoutCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLayoutSaveSettings(int) - Method in interface nxopen.cam.LayoutCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLayoutState(LayoutState) - Method in interface nxopen.cae.LayoutStateApplicator
-
Sets the layout state that will be applied.
- setLayoutStates(LayoutState[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set Layout States to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLayoutType(CalloutGroupBuilder.Layout) - Method in interface nxopen.annotations.CalloutGroupBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLayoutType(StandardViewsBuilder.Type) - Method in interface nxopen.drawings.StandardViewsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setLayoutType(BlankNestingBuilder.LayoutTypeSpecification) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setLayoutVector(Direction) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setLaySymbolText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setLaySymbolType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setLayupName(String) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setLccMinWidth(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the lightening core mininum width of the die rib.
- setLccMinWidth(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the lightening core mininum width of die ribs.
- setLeadAngle(int, double) - Method in interface nxopen.cam.InterpolateVector
-
Set the lead angle
License requirements: cam_base ("CAM BASE")
.
- setLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setLeaderAlignment(LeaderAlignment) - Method in interface nxopen.annotations.LeaderBundle
-
Sets the leader alignment
License requirements: None.
- setLeaderAttachment(HoleCalloutSettingsBuilder.LeaderAttachment) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
Sets the leader attachment, which decides where the leader is attached to the call out.
- setLeaderAttachmentPoint(MasterSymbolBuilder.LeaderAttachmentType, Point) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Setting Leader attachment point on builder side
License requirements: drafting ("DRAFTING")
.
- setLeaderBundle(LeaderBundle) - Method in interface nxopen.annotations.AnnotationPlacement
-
Sets the leader bundle for the current annotation in the builder
License requirements: drafting ("DRAFTING")
.
- setLeaderData(int, LeaderAttachment, NXObject, View, Point3d, double, Point3d[]) - Method in interface nxopen.annotations.LeaderBundle
-
Sets the leader data for the nth leader
License requirements: None.
- setLeaderLineLength(double) - Method in interface nxopen.markup.MarkupObject
-
Sets the leader line length
License requirements: None.
- setLeaderLocation(VerticalTextJustification) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the leader location
License requirements: None.
- setLeaderLocation(VerticalTextJustification) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLeaderOrientation(LeaderOrientation) - Method in interface nxopen.annotations.Annotation
-
Sets the leader orientation for the annotation.
- setLeaderOrientation(LeaderOrientation) - Method in interface nxopen.annotations.DimensionData
-
Sets the leader orientation for the dimension
License requirements: None.
- setLeaderOrientation(LeaderSide) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLeaderPerpendicular(boolean) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLeaderPlacement(ChamferLeaderPlacement) - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Sets the leader placement relative to the chamfer
License requirements: None.
- setLeaderPositionParameter(double) - Method in interface nxopen.annotations.Gdt
-
Sets a parameter which indicates where the leader end point is located on
the object that it is attached to. 0.0 indicates the start of the
object that it is attached to and 1.0 indicates the end of the object.
- setLeaderSelection(boolean) - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLeaderSide(LeaderSide) - Method in interface nxopen.annotations.LeaderBundle
-
Sets the leader side
License requirements: None.
- setLeaderStub(DiameterRadiusLeaderStub) - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
- setLeaderType(LeaderType) - Method in interface nxopen.annotations.LeaderBundle
-
Sets the leader type
License requirements: None.
- setLeadingAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced
-
- setLeadInMethod(NcmWedmBuilder.LeadInMethodTypes) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLeadInPoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLeadInPointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLeadOutMethod(NcmWedmBuilder.LeadOutMethodTypes) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLeadOutPoint(NXObject) - Method in interface nxopen.cam.WedmOpenGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLeadOutPointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLeadOutSameAsLeadIn(NcmWedmBuilder.LeadOutSameAsLeadInTypes) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLeastSqrAutoFilter(boolean) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setLeftBorder(RenderingPropertiesBuilder) - Method in interface nxopen.diagramming.tables.CellBuilder
-
License requirements: None.
- setLeftDialogItem(String) - Method in interface nxopen.uistyler.Attachment
-
Sets the left dialog item
License requirements: None.
- setLeftDistance(double) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setLeftEyeColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLeftEyeDownColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLeftEyeUpColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLeftMargin(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setLeftMargin(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setLeftOffset(int) - Method in interface nxopen.uistyler.Attachment
-
Sets the left offset
License requirements: None.
- setLeftRightSide(BlankLayoutBuilder.LeftRightSideOption) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setLeftTrimmedMargin(double) - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
License requirements: None.
- setLeftTrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLeftUntrimmedMargin(double) - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
License requirements: None.
- setLeftUntrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLeftView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLegacyLineWidthMap(PartObject.WidthType[]) - Method in interface nxopen.preferences.PartObject
-
Sets line width map that is used to convert legacy line widths to
new line widths.
- setLegacyPreferences(int[], double, double, String, int[], int[], double, int, int, int) - Method in interface nxopen.uf.UFSket
-
- setLegacyView(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
License requirements: drafting ("DRAFTING")
.
- setLegacyView(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLegacyView(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
License requirements: drafting ("DRAFTING")
.
- setLegendMultipleOverlaysState(boolean) - Method in interface nxopen.cae.PostLegendPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setLegendPosition(DisplayPropertiesBuilder.LegendPos) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setLegImpactCurveOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLegSpreadsheet(String) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLegZonesOutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLegZonesOutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLegZonesOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLegZonesOutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLength(double) - Method in interface nxopen.ame.FormSheetBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setLength(Value) - Method in interface nxopen.annotations.IRectangularTarget
-
Sets the target length.
- setLength(Value) - Method in interface nxopen.annotations.RectangularTargetData
-
Sets the length.
- setLength(double) - Method in interface nxopen.cae.NodesOnCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLength(double) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setLength(double) - Method in interface nxopen.cam.HoleBossSet
-
License requirements: cam_base ("CAM BASE")
.
- setLength(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLength(double) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLength(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLength(double) - Method in interface nxopen.cam.LaserCutoutDefinition
-
License requirements: cam_base ("CAM BASE")
.
- setLength(double) - Method in interface nxopen.cam.WireGuide
-
License requirements: cam_base ("CAM BASE")
.
- setLength(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the length of the keyway.
- setLength(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the length of keyways.
- setLength(double) - Method in interface nxopen.die.PadChildBuilder
-
Sets the length of the die pad.
- setLength(double) - Method in interface nxopen.die.PadParentBuilder
-
Sets the length of die pads.
- setLength(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLength(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLength(double) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLength(String) - Method in interface nxopen.features.BlockFeatureBuilder
-
The expression representing the block length.
- setLength(AeroFlangeBuilder.LengthType, String) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Set the type of length and the length expression.
- setLength(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
- setLength(double) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setLength(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setLength(double) - Method in interface nxopen.weld.WeldFillStripBuilder
-
License requirements: None.
- setLengthAlignMethod(StiffenerBySupportPathBuilder.AlignedTo) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setLengthAndHeight(double, double) - Method in interface nxopen.annotations.UserSymbolPreferences
-
Sets the length and height
License requirements: None.
- setLengthAndWidth(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setLengthDirectionI(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLengthDirectionJ(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLengthDirectionK(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLengthDirVector(Direction) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLengthFlag(boolean) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setLengthInterval(double) - Method in interface nxopen.cam.FeedsOptimizationData
-
License requirements: cam_base ("CAM BASE")
.
- setLengthMethod(HelixBuilder.LengthMethods) - Method in interface nxopen.features.HelixBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLengthMethod(ShelfBuilder.LengthMethods) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLengthPercentile(HumanHandsDialogBuilder.LengthType) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setLengthPitch(String) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setLengthPitch(String) - Method in interface nxopen.annotations.LineWeldSideData
-
Sets the weld length and pitch
License requirements: None.
- setLengthReference(AdvancedFlangeBuilder.LengthReferences) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setLengthReference(FlangeBendPropertiesBuilder.LengthReferences) - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setLengths(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Sets all of the lengths stored with this UDO
License requirements: None.
- setLengths(int, int, double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Replaces the lengths stored with this UDO in the specified range with a new array of lengths
License requirements: None.
- setLengthStep(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLengthType(FlangeBuilder.LengthTypeOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Sets a enum indicating the length type.
- setLengthUnit(Unit) - Method in interface nxopen.cae.AlternateFemRepresentationSourceBuilder
-
Sets the length unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLengthValue(double) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setLensAngleType(CameraBuilder.LensAngle) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setLensFlareIntensity(double) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setLensFlareToggle(boolean) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setLensFlareType(CameraBuilder.LensFlare) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setLetter(String) - Method in interface nxopen.annotations.DatumFeatureSymbolBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setLetter(String) - Method in interface nxopen.annotations.DatumReferenceBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setLetter(String) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setLetter(String) - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLetterDescription(String) - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLetterFormat(LetterFormatTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLetterFormat(LetterFormatTypes) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLetterFormat(LetterFormatTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLetteringPreferences(LetteringPreferences) - Method in interface nxopen.annotations.Annotation
-
Sets the lettering preferences for the annotation.
- setLetteringPreferences(LetteringPreferences) - Method in interface nxopen.annotations.DimensionData
-
Sets the lettering preferences
License requirements: None.
- setLetteringPreferences(LetteringPreferences) - Method in interface nxopen.annotations.SimpleDraftingAidPreferences
-
Sets the lettering preferences
License requirements: None.
- setLetteringPreferences(LetteringPreferences) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the global lettering preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLetteringPreferences(UFDrf.LetteringPreferences) - Method in interface nxopen.uf.UFDrf
-
- setLetterName(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLetterName(String) - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLevel(int) - Method in interface nxopen.cae.xyplot.ColorScaleStyle
-
License requirements: None.
- setLevel(LoadDraftingStandardBuilder.LoadLevel) - Method in interface nxopen.preferences.LoadDraftingStandardBuilder
-
License requirements: None.
- setLevelDepth(double) - Method in interface nxopen.cam.PathLevelMarker
-
License requirements: None.
- setLevelDepth(double) - Method in interface nxopen.cam.RoughTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLevelDepthMode(RoughTurningBuilder.LevelDepthModeTypes) - Method in interface nxopen.cam.RoughTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLevelMarker(int, PathLevelMarker) - Method in interface nxopen.cam.Path
-
Updates the data of the level marker event at the given index
License requirements: None.
- setLevelMarker(PathEvent, PathLevelMarker) - Method in interface nxopen.cam.Path
-
Updates the data of the level marker event
License requirements: None.
- setLevelNormal(Vector3d) - Method in interface nxopen.cam.PathLevelMarker
-
License requirements: None.
- setLevelNumber(int) - Method in interface nxopen.cam.PathLevelMarker
-
License requirements: None.
- setLevelSequencing(GrooveMillingBuilder.LevelSequencingType) - Method in interface nxopen.cam.GrooveMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLevelSequencing(GrooveMillingBuilder.LevelSequencingType) - Method in interface nxopen.cam.RadialGrooveMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLevelType(SmoothCurveStringBuilder.LevelTypes) - Method in interface nxopen.features.SmoothCurveStringBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLibName(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setLibraryInformation(NXObject, String, String) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Sets library information for the feature
License requirements: None.
- setLibraryName(String) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setLibraryName(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setLibraryPath(String) - Method in interface nxopen.annotations.ImportSymbolBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setLibraryPath(String) - Method in interface nxopen.cam.OperationTeaching
-
Sets the selected library path
License requirements: fbm_author ("FBM Author")
.
- setLibraryPathName(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setLibraryReference(String) - Method in interface nxopen.cam.CAMSetup
-
License requirements: cam_base ("CAM BASE")
.
- setLibref(String) - Method in interface nxopen.cam.CutterExport
-
License requirements: None.
- setLiftAtConvexCorner(boolean) - Method in interface nxopen.cam.ToolAxisChange
-
License requirements: cam_base ("CAM BASE")
.
- setLifterDriveVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLifterName(String) - Method in interface nxopen.tooling.DefineLifterBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLifterOnDriveVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLifterOnLifterVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLifterOnName(String) - Method in interface nxopen.tooling.DefineLifterBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLifterVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLightBuilderInList(int, LightBuilder) - Method in interface nxopen.display.Lighting
-
Sets a light builder in the array at the given index
License requirements: None.
- setLightCollectionEnum(TrueShadingBuilder.SHEDLightCollectionType) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setLightDiffuseness(double) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setLightDimmerValue(double) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setLighteningCore(boolean) - Method in interface nxopen.die.RibChildBuilder
-
Sets the lightening core switch of the die rib, if true the lightening core will be built into the rib, if false it will not.
- setLighteningCore(boolean) - Method in interface nxopen.die.RibParentBuilder
-
Sets the lightening core switch of die ribs, if true the lightening core will be built into the rib, if false it will not.
- setLighteningCoreClearance(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the lightening core clearance of the die rib.
- setLighteningCoreClearance(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the lightening core clearance of die ribs.
- setLightIntensities(Light[], double[]) - Method in interface nxopen.LightCollection
-
Modifies the intensities of a set of lights.
- setLightIntensity(double) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setLightNumber(int) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setLightPlacement(HighlightLinesAnalysisBuilder.LightPlacements) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setLightPlaneOrigin(Point3d) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Sets the origin of the light plane.
- setLightPlaneXAxis(Vector3d) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Sets the x-axis of the light plane.
- setLightPlaneYAxis(Vector3d) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Sets the y-axis of the light plane.
- setLightShadowType(LightBuilder.ShadowType) - Method in interface nxopen.display.LightBuilder
-
License requirements: None.
- setLightSpacing(double) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setLightTextureMaterial(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setLightType(LightType) - Method in interface nxopen.display.LightBuilder
-
License requirements: None.
- setLightweightView(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
License requirements: drafting ("DRAFTING")
.
- setLightweightView(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLightweightView(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
License requirements: drafting ("DRAFTING")
.
- setLightWidth(double) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setLighweightLabel(String) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setLimit(boolean) - Method in interface nxopen.sim.KinematicAxisBuilder
-
- setLimit1MeasureExpressionUsed(boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: None.
- setLimit1MeasureExpressionUsed(boolean) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: None.
- setLimit1Type(AeroFlangeBuilder.LimitObjectTypes) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLimit1Type(AeroRibBuilder.LimitObjectTypes) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLimit2MeasureExpressionUsed(boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLimit2MeasureExpressionUsed(boolean) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: None.
- setLimit2Type(AeroFlangeBuilder.LimitObjectTypes) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLimit2Type(AeroRibBuilder.LimitObjectTypes) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLimitAngleNegative(double) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setLimitAnglePositive(double) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setLimitChangeValue(int) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Sets the limit boundary handle type.
- setLimitEngRetToCutRegion(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLimitFailingAreas(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLimitFitAnsiHoleType(FitAnsiHoleType) - Method in interface nxopen.annotations.Dimension
-
Sets the tolerance limit fit ANSI hole type.
- setLimitFitAnsiHoleType(FitAnsiHoleType) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the tolerance limit fit ANSI hole type
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitAnsiHoleType(FitAnsiHoleType) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitAnsiHoleType(FitAnsiHoleType) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the tolerance limit fit ansi hole type
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitAssemblyDisplayStyle(FitAssemblyDisplayStyle) - Method in interface nxopen.annotations.DimensionPreferences
-
- setLimitFitAssemblyDisplayStyle(FitAssemblyDisplayStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
- setLimitFitAssemblyNewDisplayStyle(FitAssemblyNewDisplayStyle) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the new display style of fit tolerance for assembly dimensions.
- setLimitFitAssemblyNewDisplayStyle(FitAssemblyNewDisplayStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDeviation(String) - Method in interface nxopen.annotations.Dimension
-
Sets the tolerance limit fit deviation.
- setLimitFitDeviation(String) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the tolerance limit fit deviation
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDeviation(String) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDeviation(String) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the tolerance limit fit deviation
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDisplayAlignment(FitDisplayAlignment) - Method in interface nxopen.annotations.DimensionPreferences
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDisplayAlignment(FitDisplayAlignment) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDisplaySplitByDimline(FitDisplaySplitByDimline) - Method in interface nxopen.annotations.DimensionPreferences
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDisplaySplitByDimline(FitDisplaySplitByDimline) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDisplayStyle(FitDisplayStyle) - Method in interface nxopen.annotations.Dimension
-
Sets the tolerance limit fit display style.
- setLimitFitDisplayStyle(FitDisplayStyle) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the tolerance limit fit display style
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDisplayStyle(FitDisplayStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitDisplayStyle(FitDisplayStyle) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the tolerance limit fit display style
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitEnhancedDisplayType(FitAnsiHoleType) - Method in interface nxopen.annotations.Dimension
-
Sets the enhanced limit fit display type.
- setLimitFitGrade(int) - Method in interface nxopen.annotations.Dimension
-
Sets the tolerance limit fit grade.
- setLimitFitGrade(int) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the tolerance limit fit grade
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitGrade(int) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitGrade(int) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the tolerance limit fit grade
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitShaftDeviation(String) - Method in interface nxopen.annotations.Dimension
-
Sets the deviation for limit fit representation of shaft tolerance
NOTE: The set method should not be used to edit a read-only object such as a Mirrored PMI object.
- setLimitFitShaftDeviation(String) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the shaft deviation for fit tolerance
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitShaftDeviation(String) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitShaftGrade(int) - Method in interface nxopen.annotations.Dimension
-
Sets the grade for limit fit representation of shaft tolerance
NOTE: The set method should not be used to edit a read-only object such as a Mirrored PMI object.
- setLimitFitShaftGrade(int) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the shaft grade for fit tolerance
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitFitShaftGrade(int) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLimitingSurface(IOrientation) - Method in interface nxopen.die.PadChildBuilder
-
Sets the limiting surface of the die pad.
- setLimitJerk(boolean) - Method in interface nxopen.mechatronics.PositionControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLimitJerk(boolean) - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLimitMethod(ExtendSheetBuilder.Limit) - Method in interface nxopen.features.ExtendSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLimitMethod(StiffenerLimitBuilder.LimitType) - Method in interface nxopen.features.shipdesign.StiffenerLimitBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setLimitOfFlc(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLimitOption(TrimPlane.LimitOptions) - Method in interface nxopen.cam.TrimPlane
-
License requirements: cam_base ("CAM BASE")
.
- setLimitOption(CurveExtendData.LimitOptions) - Method in interface nxopen.geometricutilities.CurveExtendData
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setLimitPlane1(Plane) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLimitPlane2(Plane) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLimitPlanes(Plane, Plane) - Method in interface nxopen.features.FaceBlendBuilder
-
This function is to set limit planes for a face blend feature.
- setLimitPoint1(Point) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLimitPoint1(Point) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLimitPoint2(Point) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLimitPoint2(Point) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setLimits(EmbossLimit[]) - Method in interface nxopen.features.EmbossRegion
-
The emboss limits
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLimits(int, int) - Method in interface nxopen.uistyler.IntegerScale
-
Specifies the scale's maximum and minimum value.
- setLimits(double, double) - Method in interface nxopen.uistyler.RealScale
-
Sets limits
License requirements: None.
- setLimitsAndFitsToleranceParms(Tag, UFGdt.LimitsAndFitsData) - Method in interface nxopen.uf.UFGdt
-
- setLimitsDefined(boolean) - Method in interface nxopen.motion.JointDefine
-
- setLimitsFromCurve(Curve) - Method in interface nxopen.die.DieLimitsBuilder
-
Set the limits from the endpoints of the input curve.
- setLimitShading(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setLimitsOfSize(InspectionMethodBuilder.LimitsOfSizeTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLimitsOfSizeMode(InspectionMethodBuilder.LimitsOfSizeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLimitSteepByCutDirection(boolean) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setLimitsType(LimitsType) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
License requirements: None.
- setLimitThicknessVariation(boolean) - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setLimitTopolSwitchFinFlag(boolean) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLimitType(Limit) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLimitType(JoggleBuilder.LimitTypes) - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setLimitType(BracketBuilder.LimitTypes) - Method in interface nxopen.features.shipdesign.BracketBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setLimitType(EndCutBuilder.LimitTypes) - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setLimitUnit(Unit) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLimitValue(double) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLimitValueOption(ElementQualitySetting.LimitValue) - Method in interface nxopen.cae.modelcheck.ElementQualitySetting
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLine(NXObject) - Method in interface nxopen.cam.InspectionScanLineBuilder
-
License requirements: None.
- setLine1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLine1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLine1PointLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLine1PointRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLine1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLine1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLineAndArrowPreferences(LineAndArrowPreferences) - Method in interface nxopen.annotations.Annotation
-
Sets the line and arrow preferences for the annotation.
- setLineAndArrowPreferences(LineAndArrowPreferences) - Method in interface nxopen.annotations.DimensionData
-
Sets the line and arrow preferences
License requirements: None.
- setLineAndArrowPreferences(LineAndArrowPreferences) - Method in interface nxopen.annotations.SimpleDraftingAidPreferences
-
Sets the line and arrow preferences
License requirements: None.
- setLineAndArrowPreferences(LineAndArrowPreferences) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the global line and arrow preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLineAntialiasing(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flag indicating whether to display drawing using line antialiasing.
- setLineAntialiasing(boolean) - Method in interface nxopen.preferences.SessionVisualizationVisual
-
Sets the line antialiasing flag.
- setLinearAxis(Axis) - Method in interface nxopen.geometricutilities.ModlDistanceAngle
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setLinearCurveType(UserDefinedMotionBuilder.LinearCurveTypes) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLinearDensity(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Sets the linear density of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setLinearDimensionTolerance(double) - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLinearDirection(Direction) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLinearFractionType(DimensionTextFormat) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLinearLogOption(FieldEvaluator.LinearLogOptionEnum) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setLinearMotion(int, PathLinearMotion) - Method in interface nxopen.cam.Path
-
Updates the data of the linear motion event at the given index
License requirements: None.
- setLinearMotion(PathEvent, PathLinearMotion) - Method in interface nxopen.cam.Path
-
Updates the data of the linear motion event
License requirements: None.
- setLinearMotionVector(Direction) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLinearOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setLinearPathSettings(LinearPathSettings) - Method in interface nxopen.routing.LinearPathBuilder
-
Sets the settings that determine what constraints to apply to the new path.
- setLinearPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLineArrowDisplayOption(OrdinateLineArrowDisplayOption) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the dimension line and arrow display option
License requirements: None.
- setLineArrowPreferences(UFDrf.LineArrowPreferences) - Method in interface nxopen.uf.UFDrf
-
- setLinearSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setLinearTolerance(LinearTolerance) - Method in interface nxopen.annotations.DimensionData
-
Sets the linear tolerances
License requirements: None.
- setLinearTolerance(double) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setLinearTolerance(double) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setLinearToleranceFactor(double) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setLinearTolerances(LinearTolerance) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the global linear tolerances for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLinearTypeMode(SectionSurfaceBuilderEx.LinearType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setLinearUnits(InspectionCmmCommandBuilder.LinearUnitsOptions) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLinearVelocityDirection(Direction) - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLineBetweenArrows(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLineColor(NXColor) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilder
-
License requirements: None.
- setLineColor(NXColor) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setLineColor(NXColor) - Method in interface nxopen.display.PlanarShipGridBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setLineColor(NXColor) - Method in interface nxopen.LineColorFontWidthBuilder
-
License requirements: None.
- setLineColor(int) - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
License requirements: None.
- setLineColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLineDirection(Direction) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLineEndPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLineEndPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLineFEEdgeRecipe1(String[]) - Method in interface nxopen.cae.connections.ConnectionData
-
Set line / FE edge recipe1
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLineFEEdgeRecipe2(String[]) - Method in interface nxopen.cae.connections.ConnectionData
-
Set line / FE edge recipe1
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
License requirements: None.
- setLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilder
-
License requirements: None.
- setLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.DisplayableObject
-
License requirements: None.
- setLineFont(DisplayPropertiesBuilder.LineFontEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setLineFont(LineFontBuilder.LineFontType) - Method in interface nxopen.LineFontBuilder
-
License requirements: None.
- setLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
License requirements: None.
- setLineFont(PartObject.ObjectType, PartObject.LineFontType) - Method in interface nxopen.preferences.PartObject
-
Sets line font for specified object type
License requirements: None.
- setLineFont(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLineFontAvailableOptions(int) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setLineFontDisplay(PartVisualizationLine.LineFontDisplayType) - Method in interface nxopen.preferences.PartVisualizationLine
-
Sets the line font display.
- setLineFontMappingFile(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setLineFontMappingFile(String) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setLineFontType(ProductOutlineBuilder.LineFont) - Method in interface nxopen.assemblies.ProductOutlineBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setLineFontType(DisplayableObject.ObjectFont) - Method in interface nxopen.display.PlanarShipGridBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setLineFontValueAsString(String) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setLineImageType(ReflectionAnalysisBuilder.LineImageTypes) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setLineIncrement(double) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setLineIncrement(double) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setLineIncrement(double) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setLineIncrement(double) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setLineIncrement(double) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setLineIncrement(double) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setLineIncrement(double) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setLineLength(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setLineLength(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLineMethod(InspectionOperationTransformBuilder.Line) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLineMethod(OperationTransformBuilder.Line) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLineNumber(ReflectionAnalysisBuilder.NumberOfLinesOptions) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setLineNumberDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLineOption(AssociativityLineOption) - Method in interface nxopen.annotations.Associativity
-
Sets the line option
License requirements: None.
- setLineOption(AssociativityLineOption) - Method in interface nxopen.annotations.AssociativityBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setLineOrientation(ReflectionAnalysisBuilder.LineOrientationType) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setLinePart1(String) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLinePart2(String) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLinePartPath(String) - Method in interface nxopen.linedesigner.CreateSystemBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setLinePastArrowDistance(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the line past arrow distance
License requirements: None.
- setLinePastArrowDistance(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLinePastArrowDistance2(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the 2nd line past arrow distance
License requirements: None.
- setLinePastArrowDistance2(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLinePlaneType(SplitSubopCommand.LinePlaneTypes) - Method in interface nxopen.cam.SplitSubopCommand
-
License requirements: None.
- setLinePoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLinePoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLineScale(double) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setLineScan(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLineSettingInheritted(boolean) - Method in interface nxopen.display.PlanarShipGridBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setLineSpaceFactor(double) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
Sets the line space factor, which defines the vertical space between parameters.
- setLineStartPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLineStartPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLineThickness(ReflectionAnalysisBuilder.LineThicknessType) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setLineType(Polyline.LineOption) - Method in interface nxopen.markup.Polyline
-
License requirements: None.
- setLineTypeName(String) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilder
-
License requirements: None.
- setLineTypePathId(String) - Method in interface nxopen.plas.RunBuilder
-
License requirements: None.
- setLineTypePriority(int) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilder
-
License requirements: None.
- setLineVector(Direction) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLineVector(Direction) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLineWidth(LineWidth) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshDisplaySettings1d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshDisplaySettings2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.MeshDisplaySettings3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
License requirements: None.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilder
-
License requirements: None.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.DisplayableObject
-
License requirements: None.
- setLineWidth(DisplayPropertiesBuilder.LineWidthEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.LineColorFontWidthBuilder
-
License requirements: None.
- setLineWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
License requirements: None.
- setLineWidth(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLineWidth(Tag, int) - Method in interface nxopen.uf.UFObj
-
- setLineWidthShowDefault(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setLineWidthShowDefaultAsOriginal(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setLineWidthShowNoChange(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setLineWidthType(DisplayableObject.ObjectWidth) - Method in interface nxopen.display.PlanarShipGridBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setLineWidthUseWideLines(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setLineWidthValue(int) - Method in interface nxopen.blockstyler.LineWidth
-
License requirements: None.
- setLink(Feature) - Method in interface nxopen.geometricutilities.WaveLinkRepository
-
Set the link created by interpart selection
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setLink(Tag, UFMotion.Link) - Method in interface nxopen.uf.UFMotion
-
- setLinkData(Tag, Tag, Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- setLinkedAndExtractedGeometryProperties(SessionModeling.LinkedAndExtractedGeometryPropertiesInheritance) - Method in interface nxopen.preferences.SessionModeling
-
Sets the linked and extracted geometry properties inheritance.
- setLinkedPartNameToBeSavedAs(Part, String) - Method in interface nxopen.geometricutilities.RenameLinkedPartModulePartBuilder
-
Add linked part module part tag and its new name to perform "Save As" along with its main part.
- setLinkedPartNameToBeSavedAs(Part[], String[]) - Method in interface nxopen.geometricutilities.RenameLinkedPartModulePartBuilder
-
Add multiple linked part module part tags and their new names to perform "Save As" along with its main part.
- setLinkedPtAngle(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- setLinkedPtCenter(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- setLinkedPtCurve(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- setLinkedPtPoint(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- setLinkFeatureAndSourceObject() - Method in interface nxopen.tooling.SplitInsertBuilder
-
Set link feature and source object.
- setLinkHandles(boolean) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLinkInitialVelocity(Tag) - Method in interface nxopen.uf.UFMotion
-
- setLinkMassProperties(Tag, UFMotion.LinkMassProperties) - Method in interface nxopen.uf.UFMotion
-
- setLinkMcsRcs(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setLinkMirrorData(Tag, Tag, Tag, Tag, Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- setLinkName(String) - Method in interface nxopen.cae.SimMotionLoadsListItemBuilder
-
License requirements: None.
- setLinkRcsToMcs(boolean) - Method in interface nxopen.cam.OrientGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLinkRegionData(Tag, int, Tag[], int, Tag[], Tag, boolean, boolean, boolean) - Method in interface nxopen.uf.UFWave
-
- setLinks(UserDefinedObject.LinkType, UserDefinedObject.LinkDefinition[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Sets all of the links with the given link type stored with this UDO.
- setLinks(UserDefinedObject.LinkType, int, int, UserDefinedObject.LinkDefinition[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Replaces the links of the given link type stored with this UDO in the specified range with a new array of links
License requirements: None.
- setLinkSheetBody(boolean) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLinkToNewComponents(boolean) - Method in interface nxopen.tooling.CopySolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLinkTransform(Tag, double[]) - Method in interface nxopen.uf.UFMotion
-
- setLinkUpdateTime(Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- setLinXnumber(int) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setLinYnumber(int) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- SetList - Interface in nxopen.blockstyler
-
Represents a SetList block .
- setList(ObjectList) - Method in interface nxopen.features.VarsweepBuilder
-
License requirements: None.
- SetList.AddCallback - Interface in nxopen.blockstyler
-
Add callback
- SetList.DeleteCallback - Interface in nxopen.blockstyler
-
Delete callback.
- SetList.InsertionLocation - Class in nxopen.blockstyler
-
During Insert, indicates whether component should be
inserted before or after the insertion location
- SetList.ReorderCallback - Interface in nxopen.blockstyler
-
Reorder callback
- setList1(DisplayableObject[]) - Method in interface nxopen.motion.PackagingBuilder
-
Sets geometry list 1.
- setList2(DisplayableObject[]) - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
- setList2(DisplayableObject[]) - Method in interface nxopen.motion.PackagingMeasureBuilder
-
Sets the geometry list 2.
- setListChildrenComponents(boolean) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setListDir(UnusedFileManagementBuilder.FileDirectory) - Method in interface nxopen.tooling.UnusedFileManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setListExpanded(boolean) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setListFeatureSet(boolean) - Method in interface nxopen.weld.ConnectedFaceFinderBuilder
-
License requirements: ugweld ("UG WELD")
.
- setListFeatureSet(boolean) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
License requirements: ugweld ("UG WELD")
.
- setListFile(String) - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setListHideGroup(boolean) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setListingDecimalPlaces(int) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the listing decimal places
License requirements: None.
- setListingOptionState(ProjectNodesToCadGeometryBuilder.ListingOption) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setListingType(DuplicateNodesCheckBuilder.ListOption) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setListItem(String) - Method in interface nxopen.tooling.FamilyMoldBuilder
-
License requirements: None.
- setListItems(String[]) - Method in interface nxopen.blockstyler.ListBox
-
Sets the ListItems
License requirements: None.
- setListItems(String[]) - Method in interface nxopen.blockstyler.StringBlock
-
Sets the ListItems
License requirements: None.
- setListItems(String[]) - Method in interface nxopen.uistyler.MultiSelectList
-
Specifies an array of character strings for item names that are used as selectable choices for this
dialog item.
- setListItems(String[]) - Method in interface nxopen.uistyler.SelectionBox
-
Specifies an array of character strings for item names that are used as selectable choices for this dialog item.
- setListItems(String[]) - Method in interface nxopen.uistyler.SingleSelectList
-
Specifies an array of character strings that are used as entries in the list
License requirements: None.
- setListOfPointsToDraw(int, Point3d) - Method in interface nxopen.routing.QuickPathBuilder
-
Save a point or extension point to the list of all points to draw on the screen.
- setListOfPointsToDrawCount(int) - Method in interface nxopen.routing.QuickPathBuilder
-
Set the number of elements in the list of all points to draw on the screen.
- setListOutput(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setListOutput(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setListOutput(boolean) - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setListValue(String) - Method in interface nxopen.annotations.PmiAttributeValueListBuilder
-
License requirements: None.
- setLittleEndian(boolean) - Method in interface nxopen.mechatronics.SHMSignalProviderBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLlr(int, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Sets the lateral loading ratio.
- setLmsSolverProperty(LmsSolverProperty) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setLoadAsSaved(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLoadCase(int) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the load case of AFU Header Id
License requirements: None.
- setLoadcase(int) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setLoadcase(int) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setLoadCase(int) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLoadCase(int) - Method in interface nxopen.cae.optimization.DAOObjective
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLoadcase(ResultProbeBuilder.LoadcaseSelection) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLoadCase(int) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLoadCaseIndex(int) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setLoadcaseIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLoadcaseIteration(int, int) - Method in interface nxopen.cae.ResultParameters
-
- setLoadcaseName(String) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
The load case name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLoadCases(TBSLoadCase[]) - Method in interface nxopen.cae.optimization.TBSLoadCaseManager
-
Sets the load cases
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setLoadcaseset(LoadCaseSet) - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLoadCaseType(NodalForceReportBuilder.LoadcaseSelection) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setLoadComponentFlag(boolean) - Method in interface nxopen.uf.UFGdt
-
- setLoadComponentOnFacetedViewSelection(boolean) - Method in interface nxopen.preferences.SessionDrafting
-
Sets the load on selection flag
License requirements: None.
- setLoadComponentOnFacetedViewUpdate(boolean) - Method in interface nxopen.preferences.SessionDrafting
-
Sets the load on update flag
License requirements: None.
- setLoadComponentsOnDemand(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLoadConditionHandlingType(SimLoadRecipeTypes.LoadConditionHandling) - Method in interface nxopen.cae.SimLoadRecipe
-
Sets the type of load conditions handling of the
SimLoadRecipe
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX10.0.0
- setLoadConstructionGeometry(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the load construction geometry flag for I-DEAS
License requirements: None.
- setLoadDBOnly(boolean) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setLoadDefinition(DurSpecialistEvent.EventType) - Method in interface nxopen.cae.DurSpecialistLoadProviderBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setLoadedPartInfo(TaggedObject, TaggedObject) - Method in interface nxopen.routing.PlacePartBuilder
-
Get information about the parts being placed.
- setLoadExact(boolean) - Method in interface nxopen.preferences.ViewSection
-
License requirements: None.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoading(String) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoadingName(String) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoadingName(String) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLoadingType(DDAMExcitation.LoadingType) - Method in interface nxopen.cae.responsesimulation.DDAMExcitationBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setLoadingTypeOption(DDAMComponentData.LoadingType) - Method in interface nxopen.cae.responsesimulation.DDAMComponentData
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setLoadLatest(boolean) - Method in interface nxopen.LoadOptions
-
Sets the option that specifies whether the system searches for
the latest component according to the version rules, or looks
for the exact match.
- setLoadOption(RenameAndExportComponentBuilder.LoadOptionType) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLoadPartialComponents(boolean) - Method in interface nxopen.MassPropertiesBuilder
-
License requirements: None.
- setLoadPointDataWithPart(boolean) - Method in interface nxopen.display.PointCloudBuilder
-
License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.
- setLoadProductManufacturingInformation(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the load product manufacturing information flag for I-DEAS
License requirements: None.
- setLoadProportionality(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setLoadProportionality(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setLoadProvider(NXObject) - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setLoadReferencedGeometry(boolean) - Method in interface nxopen.positioning.MatingConverter
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setLoadRequirements(double) - Method in interface nxopen.linedesigner.CoverFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setLoadRequirements(double) - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setLoads(SimLoad[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set selected loads to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLoads(SimLoad[]) - Method in interface nxopen.cae.MechanicalLoadSumBuilder
-
Sets the loads
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLoadSolidEdgeAssemblyFeatures(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the Assembly-level features flag for Solid Edge
License requirements: None.
- setLoadSolidEdgeConstructionGeometry(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the load construction geometry flag for Solid Edge
License requirements: None.
- setLoadSolidEdgeProductManufacturingInformation(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the load product manufacturing information flag for Solid Edge
License requirements: None.
- setLoadVectorScale(double, boolean) - Method in interface nxopen.motion.LoadTransferControl
-
Sets load vector scale
License requirements: mechanisms ("MECHANISMS")
.
- setLoc(Result.Location) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLocalBaseFace(Face) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Sets the base face of local convert from which the thickness of the part is determined.
- setLocalHeadOrientType(LaserControlPoint.HeadOrientTypes) - Method in interface nxopen.cam.LaserControlPoint
-
License requirements: cam_base ("CAM BASE")
.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.Button
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.Explorer
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.Group
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.Label
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.MultilineString
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.ObjectColorPicker
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.RGBColorPicker
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.TabControl
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.Table
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setLocalize(boolean) - Method in interface nxopen.blockstyler.Wizard
-
License requirements: None.
- setLocalOrigin(Point3d) - Method in interface nxopen.display.BoundedGridBuilder
-
License requirements: None.
- setLocalResultFile(String, String) - Method in interface nxopen.cae.SimResultReference
-
Specify local result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLocalResultFile(String, String) - Method in interface nxopen.cae.SimSolution
-
- setLocalReturnFinishMode(NcmTurnThreadBuilder.LocalReturnModes) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnFinishMove(NcmTurnThreadBuilder.LocalReturnTypes) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnFinishNumberOfPasses(int) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnFinishPoint(Point) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnMode(NcmTurnThreadBuilder.LocalReturnMainModes) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnMove(NcmTurnThreadBuilder.LocalReturnTypes) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnPoint(Point) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnRoughMode(NcmTurnThreadBuilder.LocalReturnModes) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnRoughMove(NcmTurnThreadBuilder.LocalReturnTypes) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnRoughNumberOfPasses(int) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalReturnRoughPoint(Point) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLocalSubdivision(CfdAutoRefinementConstraintBuilder.LocalSubdivisions) - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setLocalSubdivision(CfdContactPreventionConstraintBuilder.LocalSubdivisions) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setLocalSubdivision(CfdLocalResolutionConstraintBuilder.LocalSubdivisions) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setLocalVolume(String) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setLocatedPoint(Point) - Method in interface nxopen.tooling.ConceptPositionBuilder
-
License requirements: None.
- setLocateFeatures(String[]) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Set the Locate features.
- setLocateXrot(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocateXtrans(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocateYrot(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocateYtrans(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocateZrot(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocateZtrans(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocation(String) - Method in interface nxopen.ame.AspectPrefixBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setLocation(boolean) - Method in interface nxopen.ame.DefineAspectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setLocation(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setLocation(double, double) - Method in interface nxopen.ame.TeeJunctionBuilder
-
Set Location of TeeJunction on Target Connection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setLocation(DurSpecialistLocalDefinitionBuilder.LocationType) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setLocation(WeldBuilder.WeldLocation) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLocation(NXObject) - Method in interface nxopen.cam.SolidTrackingBuilder
-
License requirements: None.
- setLocation(ContinuationLocation) - Method in interface nxopen.diagramming.tables.ContinuationDataBuilder
-
License requirements: None.
- setLocation(KeywayBuilder.LocationType) - Method in interface nxopen.die.KeywayBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLocation(KeywayChildBuilder.LocationOption) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the location of the keyway.
- setLocation(ILocation) - Method in interface nxopen.die.PadChildBuilder
-
Sets the location of the die pad.
- setLocation(BodyByEquationBuilder.LocationTypes) - Method in interface nxopen.features.BodyByEquationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLocation(EmbedManagerBuilder.LocationTypes) - Method in interface nxopen.features.EmbedManagerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLocation(MapleBuilder.LocationType) - Method in interface nxopen.features.MapleBuilder
-
- setLocation(MathIntegrationBuilder.LocationTypes) - Method in interface nxopen.features.MathIntegrationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLocation(Point) - Method in interface nxopen.features.VariableRadiusPointsBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setLocation(MirrorCertificationBuilder.LocationType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLocation(PendulumPlacementBuilder.LocationType) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLocation(String) - Method in interface nxopen.issue.IssueBriefcase
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.ComponentNameBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.DefineComponentBuilder
-
Sets the location type of the component indicating local, native or team center
License requirements: nx_layout ("NX Layout")
.
- setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.InsertComponentBuilder
-
Sets the location type of the 2D Component indicating local, native or team center
License requirements: nx_layout ("NX Layout")
.
- setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder
-
Sets the location type of the 2D Component indicating local, native or team center
License requirements: nx_layout ("NX Layout")
.
- setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.PublishComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setLocation(Layout2dDefinitionLocation) - Method in interface nxopen.layout2d.ReplaceComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setLocation(Point2d) - Method in interface nxopen.markup.MarkupObject
-
Sets the location
License requirements: None.
- setLocation(Point2d) - Method in interface nxopen.pid.EquipmentBuilder
-
Sets the symbol location.
- setLocation(Point2d) - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
Sets the symbol location.
- setLocation(WeldPointLocation) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the processing method to use for generating weld points along reference section(s)
License requirements: ugweld ("UG WELD")
.
- setLocationAspect(boolean) - Method in interface nxopen.ame.ReportsSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setLocationCode(String) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setLocationCoordinatesystem(CoordinateSystem) - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLocationCoordinateSystem(CoordinateSystem) - Method in interface nxopen.Print3dBuilder
-
License requirements: None.
- setLocationCoords(Point3d) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The location definition method by coordinates
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setLocationCsys(int) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The location definition method by coordinate system origin
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setLocationCsysSource(Result.CoordinateSystemSource) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The source for the location coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setLocationDesignation(boolean) - Method in interface nxopen.ame.DefineAspectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setLocationElement(FEElement) - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
Sets location at an element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLocationElementEdge(FEElemEdge) - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
Sets location at an element edge
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLocationElementFace(FEElemFace) - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
Sets location at an element face
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLocationId(int) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The location definition method by node id
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setLocationIdentifierOrder(String[]) - Method in interface nxopen.ame.EplanStructureIdentifierOrderBuilder
-
The structure order index for location
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setLocationMethod(FreeBodyResultsBuilder.LocationMethod) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The location definition method
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setLocationNode(FENode) - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
Sets location at a node
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLocationObjects(NXObject[]) - Method in interface nxopen.routing.DesignRuleViolationLocation
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setLocationOffset(double) - Method in interface nxopen.die.PadChildBuilder
-
Sets the location offset of the die pad.
- setLocationOffset(double) - Method in interface nxopen.die.PadParentBuilder
-
Sets the location offset of die pads.
- setLocationOffsetDirection(IReferenceAxis) - Method in interface nxopen.die.PadChildBuilder
-
Sets the location offset direction of the die pad.
- setLocationOnFlange(boolean) - Method in interface nxopen.die.ClampingSlotBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLocationOption(JointmarkGuideBuilder.Location) - Method in interface nxopen.weld.JointmarkGuideBuilder
-
License requirements: ugweld ("UG WELD")
.
- setLocationOptionAsString(String) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setLocationParameters(NXObject) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder
-
Set the trackpoint location and default parameters
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocationPercent(double) - Method in interface nxopen.pid.FlowDirectionArrowBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setLocationPoint(Point) - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLocationPointX(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocationPointY(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocationPointZ(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLocations(DesignRuleViolationLocation[]) - Method in interface nxopen.routing.DesignRuleViolation
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setLocationSegment(int) - Method in interface nxopen.pid.FlowDirectionArrowBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setLocationStyle(DiagrammingLocationstyle) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setLocationType(AddendumSectionBuilder.SectionLocationType) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLocatorDepth(String) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLocatorDepth(String) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLocatorLetter(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setLocatorPosition(WearPlateLocChildBuilder.PositionType) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Sets the locator position of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- setLocatorPosition(WearPlateLocParentBuilder.PositionType) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Sets the locator position of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- setLocatorType(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setLocatorWidth(String) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLocatorWidth(String) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLock(boolean) - Method in interface nxopen.annotations.TitleBlockCellBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLock(boolean) - Method in interface nxopen.diagramming.TitleBlockCellBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLockAngle(double) - Method in interface nxopen.cae.LaminateLockAngleBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setLockAngle(boolean) - Method in interface nxopen.routing.LinearPathSettings
-
License requirements: routing_base ("Routing Basic")
.
- setLockAspectRatio(boolean) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setLockAspectRatio(boolean) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setLockAspectRatio(boolean) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setLockAxis(RotaryPolarMoveBuilder.LockAxisDirection) - Method in interface nxopen.cam.RotaryPolarMoveBuilder
-
License requirements: None.
- setLockBoundary(boolean) - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLockBoundary(boolean) - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLocked(boolean) - Method in interface nxopen.diagramming.tables.CellBuilder
-
License requirements: None.
- setLocked(boolean) - Method in interface nxopen.diagramming.tables.TableBuilder
-
License requirements: None.
- setLocked(Tag, String, boolean) - Method in interface nxopen.uf.UFAttr
-
- setLockedCutElbow(boolean) - Method in interface nxopen.mechanicalrouting.DynamicCutElbowBehaviorBuilder
-
Sets true to define the locked state for dynamic behavior.
- setLockEngagement(boolean) - Method in interface nxopen.routing.ClockPartBuilder
-
Set EngagementLock of builder attribute
License requirements: routing_base ("Routing Basic")
.
- setLockInterval1(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setLockInterval2(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setLockLength(boolean) - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Sets the lock length flag.
- setLockLength(boolean) - Method in interface nxopen.routing.LinearPathSettings
-
License requirements: routing_base ("Routing Basic")
.
- setLockMethod(GeneralViewLockmethodOption) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLockmethodView(GeneralViewLockmethodOption) - Method in interface nxopen.drawings.GeneralViewStyle
-
License requirements: drafting ("DRAFTING")
.
- setLockmethodView(GeneralViewLockmethodOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLockmethodView(GeneralViewLockmethodOption) - Method in interface nxopen.preferences.GeneralViewPreferences
-
License requirements: drafting ("DRAFTING")
.
- setLockOffset(boolean) - Method in interface nxopen.drawings.ViewPlacementBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLockOnSave(boolean) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setLockOnSave(boolean) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setLockOrientation(boolean) - Method in interface nxopen.SketchPatternBuilder
-
License requirements: None.
- setLockOriginalAspectRatio(boolean) - Method in interface nxopen.report.ImageOption
-
License requirements: None.
- setLockPartsListSetup(boolean) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setLockPitchAndWidth(boolean) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setLockPlane(RotaryPolarMoveBuilder.LockPlaneType) - Method in interface nxopen.cam.RotaryPolarMoveBuilder
-
License requirements: None.
- setLockPlanes(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setLockPoles(boolean) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLockPos(double) - Method in interface nxopen.cam.RotaryPolarMoveBuilder
-
License requirements: None.
- setLockRegionUEndFlexibility(int) - Method in interface nxopen.features.StudioXformBuilder
-
- setLockRegionUEndFlexibility(int) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLockRegionUStartFlexibility(int) - Method in interface nxopen.features.StudioXformBuilder
-
- setLockRegionUStartFlexibility(int) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLockRegionVEndFlexibility(int) - Method in interface nxopen.features.StudioXformBuilder
-
- setLockRegionVEndFlexibility(int) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLockRegionVStartFlexibility(int) - Method in interface nxopen.features.StudioXformBuilder
-
- setLockRegionVStartFlexibility(int) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLockRotation(boolean) - Method in interface nxopen.routing.ClockPartBuilder
-
Set RotationLock of builder attribute
License requirements: routing_base ("Routing Basic")
.
- setLockRotations(boolean) - Method in interface nxopen.View
-
Sets the "Lock Rotations" toggle state of a view.
- setLockSizeAndPosition(boolean) - Method in interface nxopen.annotations.DisplayStyleBuilder
-
License requirements: geometric_tol ("GDT")
.
- setLockSizeAndPosition(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the lock pan/zoom option
License requirements: None.
- setLockSlip(boolean) - Method in interface nxopen.motion.CurveOnCurveBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setLockState() - Method in interface nxopen.MWUpdate
-
Utility function for reseting update lock and perform update
License requirements: None.
- setLockStatus(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLockStatus(boolean) - Method in interface nxopen.cae.Mesh
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLockTableContents(boolean) - Method in interface nxopen.annotations.TabularNoteStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLockTableFormat(boolean) - Method in interface nxopen.annotations.TabularNoteStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLockToSelectedFlag(boolean) - Method in interface nxopen.routing.SplinePathBuilder
-
Sets whether the spline will attempt to lock points to selected object.
- setLockToSelectedObject(boolean) - Method in interface nxopen.routing.LinearPathSettings
-
License requirements: routing_base ("Routing Basic")
.
- setLockUpdateStatus(boolean) - Method in interface nxopen.layout2d.Component
-
License requirements: nx_layout ("NX Layout")
.
- setLockWrist(boolean) - Method in interface nxopen.features.HumanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setLockx(boolean) - Method in interface nxopen.tooling.MoldCsysBuilder
-
License requirements: None.
- setLocky(boolean) - Method in interface nxopen.tooling.MoldCsysBuilder
-
License requirements: None.
- setLockz(boolean) - Method in interface nxopen.tooling.MoldCsysBuilder
-
License requirements: None.
- setLogDecades(int) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
License requirements: None.
- setLogfile(String) - Method in interface nxopen.uf.UFClone
-
- setLogFileDirectory(String) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setLogFileLocation(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLogFileMode(ValidatorOptions.LogModeTypes) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setLogical(String, boolean) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the logical value for the given property name.
- setLogical(String, boolean) - Method in interface nxopen.PropertyContainer
-
Sets the logical value for the given property name.
- setLogicalDesignObject(NXObject) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setLogicalName(String) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setLogicalObject(LogicObject) - Method in interface nxopen.mechatronics.ComparisonResult
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLogicalValue(String) - Method in interface nxopen.mechatronics.ComparisonResultAttribute
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLogicalValue(boolean) - Method in interface nxopen.SpreadsheetCellData
-
License requirements: None.
- setLogicalValue(UFCamPref.CamPref, boolean) - Method in interface nxopen.uf.UFCamPref
-
- setLogicalValue(Tag, int, boolean) - Method in interface nxopen.uf.UFParam
-
- setLogicalValueOfAttribute(UFVariant, String, boolean) - Method in interface nxopen.uf.UFMfm
-
- setLogicType(GanttLinkerBuilder.LinkerLogicType) - Method in interface nxopen.mechatronics.GanttLinkerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setLongDescription(String) - Method in interface nxopen.routing.DesignRuleViolation
-
Sets the long description of the design rule violation is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setLongFacets(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLongitudeScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setLongitudinalEffects(boolean) - Method in interface nxopen.motion.TirePropertyHighOrderParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setLongitudinalFunction(Function) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setLongitudinalType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setLongitudinalYFrames(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesExtendBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesExtendColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesExtendFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesExtendFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesExtendLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesExtendWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalYFramesTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFrames(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesExtendBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesExtendColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesExtendFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesExtendFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesExtendLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesExtendWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLongitudinalZFramesTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setLookahead(String, int) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the controller lookahead, which indicates how many lines are evaluate from the controller ahead.
- setLookForAdditionalPlacementSolutions(boolean) - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
Set to true to look for additional placement solutions.
- setLoopType(MeshFromBoundaryBuilder.LoopOption) - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLoopType(RapidSurfaceBuilder.LoopTypes) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setLowerArea(SeatBeltAnchorageBuilder.LowerAreaType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLowerBase(Plane) - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLowerBound(double) - Method in interface nxopen.cae.ModelUpdateDesignVariable
-
Sets lower bound
License requirements: nx_correl_update ("FE Model Update")
.
- setLowerBound(double) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setLowerBound(String) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setLowerBoundFreq(double) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- setLowerBoundFrequency(double) - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setLowerBoundLatticeArea(double) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLowerBoundOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setLowerBoundSolidArea(double) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLowerDeckThickness(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLowerDMS(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLowerLimit(double) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setLowerLimit(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLowerLimit(SeatBeltAnchorageBuilder.LowerLimitType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLowerLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setLowerLimitDefined(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the option of defining lower limit for joint
License requirements: mechanisms ("MECHANISMS")
.
- setLowerLimitEnabled(boolean) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setLowerLimitMode(MillOrientGeomBuilder.LowerLimitModes) - Method in interface nxopen.cam.MillOrientGeomBuilder
-
Sets the lower limit mode
License requirements: cam_base ("CAM BASE")
.
- setLowerLimitPlane(NXObject) - Method in interface nxopen.cam.MillOrientGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLowerLimitPlaneData(Tag, double[], double[]) - Method in interface nxopen.uf.UFCam
-
- setLowerLimitPlaneStatus(Tag, UFParam.LwplaneStatus) - Method in interface nxopen.uf.UFCam
-
- setLowerLimitPlaneTag(Tag, Tag) - Method in interface nxopen.uf.UFCam
-
- setLowerLimitPlaneUsage(Tag, UFParam.LwplaneUsage) - Method in interface nxopen.uf.UFCam
-
- setLowerLimitRightHandSide(String) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setLowerLimitType(TurnRoughFinishLocalReturnBuilder.LimitTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Set the lower limits mode
License requirements: cam_base ("CAM BASE")
.
- setLowerMetricToleranceValue(double) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the metric lower tolerance value of a dimension.
- setLowerPlane(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setLowerPlane(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setLowerRadius(String) - Method in interface nxopen.die.ThroatChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setLowerSoftLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setLowerSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setLowerText(String) - Method in interface nxopen.annotations.IdSymbolBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setLowerTextText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setLowerTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setLowerThreshold(double) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setLowerTolerance(double) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setLowerTolerance(double) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setLowerToleranceDegrees(Value) - Method in interface nxopen.annotations.AngularTolerance
-
Sets the lower tolerance in degrees
License requirements: None.
- setLowerToleranceDegrees(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLowerToleranceEnglish(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLowerToleranceInches(Value) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the lower tolerance value in inches
License requirements: None.
- setLowerToleranceMetric(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setLowerToleranceMm(Value) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the lower tolerance in millimeters(MM)
License requirements: None.
- setLowerToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setLowerToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setLowerToleranceValue(double) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the lower tolerance value of a dimension.
- setLowerToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setLowerToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setLowFrequencyCutoff(double) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setLowFrequencyCutoff(double) - Method in interface nxopen.cae.PreTestSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setLowFrequencyFilteringMode(boolean) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setLowFrequencyFilteringMode(boolean) - Method in interface nxopen.cae.PreTestSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setLowRadius(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setLowThicknessColor(NXColor) - Method in interface nxopen.cae.ThicknessBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setLumbarProminenceL81(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setLumpedMassData(FEElement, double) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets lumped mass element associated data.
- setLwrtAngle(double) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setLwrtAngle(double) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setLwrtIntensity(double) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setLwrtIntensity(double) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setLwrtQuality(double) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setLwrtQuality(double) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setLwrtStudioDisplay(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade
-
Sets the lwrt studio display flag.Alters how studio are displayed.
- setMachineAllowance(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setMachineAllowance(double) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setMachineAxisValue(KinematicAxis, double) - Method in interface nxopen.sim.KinematicModel
-
Sets the machine axis to the given value.
- setMachineBaseJunctionName(String) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMachineCycleSubroutineName(String) - Method in interface nxopen.cam.TurningOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMachineName(String) - Method in interface nxopen.sim.MachineToolConfiguration
-
License requirements: None.
- setMachineName(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.
- setMachineOffset(boolean) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMachinePartOccurrence(Component) - Method in interface nxopen.cam.MachineGroupBuilder
-
License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMachineTechnology(String, MachineToolConfiguration.TechnologyTypes) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the machine technology
License requirements: None.
- setMachineToolMainMcs(ToolPathTiltMachine.ToolMainMcsTypes) - Method in interface nxopen.cam.ToolPathTiltMachine
-
License requirements: None.
- setMachineType(ConvertFromMCDBuilder.MachineTypes) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMachineVendor(String) - Method in interface nxopen.sim.MachineToolConfiguration
-
License requirements: None.
- setMachineZeroCsys(CoordinateSystem) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMachiningAccessDirection(Direction[], double) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Set the machining access direction to exact or approximate vectors
License requirements: None.
- setMachiningAccessDirection(Point, Direction, boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Set the machining access direction to toward or away from an axis defined by a point and a vector
License requirements: None.
- setMachiningAccessDirection(Point, boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Set the machining access direction to toward or away from a point
License requirements: None.
- setMachiningAccessDirections(Direction[], double) - Method in interface nxopen.cam.GroupFeatures
-
Set the machining access directions to filter
License requirements: cam_base ("CAM BASE")
.
- setMachiningAllowance(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setMachiningAllowance(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setMachiningArea(String) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Change machining area
License requirements: cam_base ("CAM BASE")
.
- setMachiningArea(String) - Method in interface nxopen.cam.Operation
-
Set machining area
License requirements: cam_base ("CAM BASE")
.
- setMachiningData(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Set Machining Data
License requirements: cam_base ("CAM BASE")
.
- setMachiningData() - Method in interface nxopen.cam.FeedsBuilder
-
Set machining data
License requirements: cam_base ("CAM BASE")
.
- setMachiningData(Tag) - Method in interface nxopen.uf.UFOper
-
- setMachiningText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setMachiningToleranceType(SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setMachiningType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setMacLowerBound(double) - Method in interface nxopen.cae.CorrelModePairingBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setMacroFile(String) - Method in interface nxopen.ame.ImportEplanPageMacroBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setMacroType(int) - Method in interface nxopen.ame.ImportEplanPageMacroBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setMagazineIndex(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setMagazineLocationIndex(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setMagFunction(Function) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setMagicFile(String) - Method in interface nxopen.motion.TirePropertyBasicParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setMagnification(double) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setMagnitude(TBSConstraintBuilder.MagnitudeType) - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setMainDeck(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder
-
Sets the main deck profile of the upper draw die deck.
- setMainLifterDriveVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMainLifterVector(Direction) - Method in interface nxopen.tooling.DefineLifterBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMainProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the main profile of the steel insert
License requirements: ug_die_design ("Die Design")
.
- setMainProfileType(MachineReliefBuilder.MainProfileTypes) - Method in interface nxopen.die.MachineReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setMainRunMethod(FormboardLayoutBuilder.MainRunType) - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setMainRunOrigin(Point) - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setMainSpindle(String) - Method in interface nxopen.sim.KinematicChannelBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setMainSpindleFace(Face) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMainSymbolCustomText(String) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setMainSymbolText(PartsListBuilder.PartsListMainSymbolText) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setMaintainAngle(boolean) - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setMaintainBlankStatus(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not previously blanked objects will be visible when a sketch is activated
License requirements: None.
- setMaintainCircularShapeForHolesInFlatSolid(boolean, boolean) - Method in interface nxopen.preferences.PartSheetmetal
-
Sets the flag indicating whether or not maintain circular shape for holes as part of the Flat Solid creation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setMaintainHelixHandedness(boolean) - Method in interface nxopen.features.MirrorBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMaintainLayerStatus(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not the work layer remains the same or returns to its previous
value when a sketch is deactivated.
- setMaintainLength(boolean) - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setMaintainLength(boolean) - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setMaintainRelationships(boolean) - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setMaintainStockFlag(boolean) - Method in interface nxopen.routing.OffsetPath
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setMaintainThreadHandedness(boolean) - Method in interface nxopen.features.MirrorBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMaintainTilt(boolean) - Method in interface nxopen.cam.ToolPathTiltAvoidance
-
License requirements: None.
- setMaintainTilt(boolean) - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- setMaintainZeroBendRadius(boolean) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Sets the option for Maintain zero bend radius.
- setMainType(MeshControlBuilder.Types) - Method in interface nxopen.cae.MeshControlBuilder
-
Sets the type of mesh control
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMainWallCenterline(DirectionOption, IProfile[]) - Method in interface nxopen.die.DeckParentBuilder
-
Sets the main wall centerline profile of the draw die punch.
- setMajorDiameter(double) - Method in interface nxopen.cam.HoleBossSet
-
License requirements: cam_base ("CAM BASE")
.
- setMajorLineSpacing(double) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setMajorLineStyle(GridBuilder.LineStyleType) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setMajorLineWeight(GridBuilder.LineWeightType) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setMajorPoint(Point) - Method in interface nxopen.SketchEllipseBuilder
-
License requirements: None.
- setMajorRadius(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMakeActive(boolean) - Method in interface nxopen.assemblies.PositioningGroupBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setMakeCurrentOnError(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the option "Make Current on Error" gives choice, whether the user
wants to make error feature current when features contain
errors during feature update/playback.
- setMakeDatumsInternal(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setMakeDisplayedPart(boolean) - Method in interface nxopen.FileNew
-
License requirements: None.
- setMakeInputCurvesDashed(boolean) - Method in interface nxopen.features.TrimCurve2Builder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMakeOriginAssociative(boolean) - Method in interface nxopen.SketchInPlaceBuilder
-
- setMakePositionIndependent(boolean) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMakePositionIndependent(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMakePositionIndependent(boolean) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveDatumBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
License requirements: None.
- setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMakePositionIndependent(boolean) - Method in interface nxopen.features.WavePointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveRoutingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMakePositionIndependent(boolean) - Method in interface nxopen.features.WaveSketchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMakeReference(boolean) - Method in interface nxopen.SketchConstraintBuilder
-
License requirements: None.
- setMakeSketchesInternal(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setMakeSketchInternal(boolean) - Method in interface nxopen.linedesigner.FloorEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setMakeSketchInternal(boolean) - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setMakeUniqueName(String) - Method in interface nxopen.BasePart
-
Sets the unique name on part for the Make Unique operation
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setMakeWorkPart(boolean) - Method in interface nxopen.assemblies.CreateOverridePartBuilder
-
License requirements: None.
- setMaleBeadPosition(DrawBeadBuilder.MaleBeadPositionTypes) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaleBeadWidthType(DrawBeadSegmentBuilder.MaleBeadWidthTypes) - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setManagedModeComponentLoadMethod(LoadOptions.ManagedModeLoadMethod) - Method in interface nxopen.LoadOptions
-
Sets the option indicating what method to use to determine how to configure assembly structure
in managed mode
License requirements: None.
- setManagedResultFile(String) - Method in interface nxopen.cae.SimResultReference
-
Specify managed result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setManagedResultFile(String) - Method in interface nxopen.cae.SimSolution
-
- SetManager - Interface in nxopen.cae
-
Represents a group of CAE object sets.
- SetManager.DistributedPlanesBboxType - Class in nxopen.cae
-
Used to specify which bounding box defines the position or radius of the sphere
- SetManager.DistributedPlanesBoundingSphereDirection - Class in nxopen.cae
-
Used to specify the method to define the Z+ direction of the sphere
- SetManager.DistributedPlanesBoundingSphereType - Class in nxopen.cae
-
Used to specify the type of bounding sphere to lay the distributed planes on
- SetManager.DistributedPlanesPosition - Class in nxopen.cae
-
Used to specify the method to define the position or the radius of the sphere
- SetManager.TargetSetDistributedPlanesData - Class in nxopen.cae
-
- SetManager.TargetSetMembersData - Class in nxopen.cae
-
- SetManager.TargetSetPlaneData - Class in nxopen.cae
-
- SetManager.TargetSetPlaneWithOffsetData - Class in nxopen.cae
-
- setManageTemporaryObjectsType(QuickQuotationBuilder.ManageTemporaryObjectsTypes) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setManipulatorMatrix(Matrix3x3) - Method in interface nxopen.FlatteningBuilder
-
- setManipulatorMatrix(Matrix3x3) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setManipulatorOrientation(Matrix3x3) - Method in interface nxopen.tooling.StockSizeBuilder
-
Set the orientation of the current bounded box.
- setManipulatorOrigin(Point3d) - Method in interface nxopen.FlatteningBuilder
-
- setManipulatorOrigin(Point3d) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setManipulatorOriginValue(Point3d) - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
Sets the manipulator origin.
- setManipulatorPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.MoldFillingBuilder
-
Sets manipulator position.
- setManipulatorToMatrixAndPosition(Matrix3x3, Point3d) - Method in interface nxopen.tooling.DieInsertBuilder
-
Sets box csys matrix.
- setManual(boolean) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setManualBody(Body) - Method in interface nxopen.tooling.TrimSolidBuilder
-
Sets the manually selected target body.
- setManualDegree(int) - Method in interface nxopen.geometricutilities.Rebuild
-
Sets the degree when rebuild type is manual.
- setManualGroupingForRule(Rule, boolean) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setManualPoint(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setManualRoutePlugin(CustomManager.AutoroutePlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will instead of the internal manual routing of
connections along a path.
- setManualTiltingType(ToolPathTiltTilting.ManualTiltTypes) - Method in interface nxopen.cam.ToolPathTiltTilting
-
License requirements: None.
- setManualToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setManualToolChange(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setManufacturerName(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.
- setManufacturingAttribute(NXObject, String, String) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Set a string manufacturing attribute on a component
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setManufacturingDesignMode(SetModeBuilder.DesMfgMode) - Method in interface nxopen.features.shipdesign.SetModeBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setManufacturingType(TBSShapeLinkCondition.ManufacturingOption) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setManufacturingYear(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setManyLayersStatus(int, UFLayer.StatusInfo) - Method in interface nxopen.uf.UFLayer
-
- setMapCenter(double) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setMapCrossHatchTo(IgesCreator.CrossHatchMapEnum) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setMapData(TaggedObject) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the new manual map object tag to map tag array
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMapDirection(TaggedObject, double[]) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the direction along which nodes will be mapped on to selected geometry
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMapDirectionMethod(TaggedObject, int) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the vector creation method used to define direction of manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMapDirectionPoint(TaggedObject, double[]) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the start point of vector chosen to define direction of manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMapFaceColor(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setMapFaceEdges(boolean) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setMapFeatures(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
License requirements: None.
- setMaplenames(String[]) - Method in interface nxopen.features.MapleBuilder
-
- setMapMethod(TaggedObject, ManualMorphBuilder.MapMethod) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the method chosen to apply node mapping on selected geometry
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMapName(TaggedObject, String) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the name of manual mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMappedComponentRemovalOption(AssyFEModel.MappedComponentRemovalType) - Method in interface nxopen.cae.AssyFEModel
-
Sets unmap update option
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMappedEntities(DisplayableObject[], DisplayableObject[]) - Method in interface nxopen.geometricutilities.ParentEquivalencyMap
-
Set externally mapped entities
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMappedHoleSize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMappedNumberOfLayers(int) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMappingMethod(ReplaceFeatureBuilder.MappingMethodType) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
License requirements: None.
- setMappingTolerance(double) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMappingToleranceIncreased(boolean) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMapRange(double) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setMapRevolvedFacesTo(IgesCreator.MapRevolvedFacesOption) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setMapSequence(boolean) - Method in interface nxopen.cae.ManualMorphBuilder
-
License requirements: None.
- setMapStatus(ParentEquivalencyMap.Status) - Method in interface nxopen.geometricutilities.ParentEquivalencyMap
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMapSubtype(SpatialMap.SubtypeEnum) - Method in interface nxopen.fields.SpatialMapBuilder
-
License requirements: None.
- setMapSubtypeMapping(SpatialMap.SubtypeMappingEnum) - Method in interface nxopen.fields.SpatialMapBuilder
-
License requirements: None.
- setMapTabCylToBSurf(boolean) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setMapTemplateToggle(boolean) - Method in interface nxopen.ame.MapToExistingObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setMapTransverseFrames(boolean) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setMapType(TaggedObject, ManualMorphBuilder.MapType) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the manual map type - Stationary, Node-to-Edge, Node-to-Face
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMapType(SpatialMap.TypeEnum) - Method in interface nxopen.fields.SpatialMapBuilder
-
License requirements: None.
- setMapType(ParentEquivalencyMap.Type) - Method in interface nxopen.geometricutilities.ParentEquivalencyMap
-
License requirements: None.
- setMapViewDep(boolean) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setMargin(TextBoxMarginOption, double) - Method in interface nxopen.cae.xyplot.LegendTableTextStyle
-
Sets the margin value of legend table
License requirements: None.
- setMargin(TextBoxMarginOption, double) - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
-
Sets the margin value of text box
License requirements: None.
- setMargin(int) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMarginBetweenViews(double) - Method in interface nxopen.drawings.StandardViewsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setMarginBetweenViews(double) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMarginFirstOffset(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setMarginForView(double) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMarginOfSafety(boolean) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMarginPercent(NXObject, double) - Method in interface nxopen.annotations.HatchBuilder
-
Set margin percent to a annotation
License requirements: drafting ("DRAFTING")
.
- setMarginSafety(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMarginSpacing(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the spacing, the distance between margins
License requirements: None.
- setMarginSpacing(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setMarginToBorder(double) - Method in interface nxopen.drawings.StandardViewsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setMarginToBorder(double) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMark(UFUndo.UserVisibility, String) - Method in interface nxopen.uf.UFUndo
-
- setMarker(NXObject) - Method in interface nxopen.motion.MarkerToNodeData
-
License requirements: mechanisms ("MECHANISMS")
.
- setMarker(Tag, UFMotion.Marker) - Method in interface nxopen.uf.UFMotion
-
- setMarkerDisplayed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMarkerItems(MarkerToNodeData[]) - Method in interface nxopen.motion.FlexBodyBuilder
-
Sets marker to node list Items
License requirements: mechanisms ("MECHANISMS")
.
- setMarkerPosition(int) - Method in interface nxopen.motion.MarkerToNodeData
-
License requirements: mechanisms ("MECHANISMS")
.
- setMarkingHeight(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setMarkingHeight(double) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setMarkingHeight(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setMarkingHeight(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMarkingLinesDirectionType(ShellTemplateBuilder.MarkingTypes) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setMarkVisibility(int, String, UFUndo.UserVisibility) - Method in interface nxopen.uf.UFUndo
-
- setMass(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMassCenter(Point) - Method in interface nxopen.motion.LinkMassProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassCenterPoint(Point) - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMassLimit(double) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Sets the mass limit of the steel insert casting
License requirements: ug_die_design ("Die Design")
.
- setMassMatrix0(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassMatrix1(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassMatrix2(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassMatrix3(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassMatrix4(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassPath(String) - Method in interface nxopen.cae.connections.ComponentData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMassProperty(RigidBodyBuilder.MassPropertiesOption) - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMassPropertyType(SectionInertiaAnalysisBuilder.PropertyType) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMassScalar0(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassScalar1(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassScalar2(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassState(LumpedMassEADBuilder.State) - Method in interface nxopen.cae.LumpedMassEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMassType(LinkMassProperty.MassPropertyType) - Method in interface nxopen.motion.LinkMassProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassUnit(Unit) - Method in interface nxopen.cae.AlternateFemRepresentationSourceBuilder
-
Sets the mass unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMassVector0(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassVector1(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassVector2(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassVector3(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMassVector4(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMaster(boolean) - Method in interface nxopen.routing.OffsetPath
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setMasterAxisJoint(PhysicsJoint) - Method in interface nxopen.mechatronics.CouplingBuilder
-
Sets the master axis.
- setMasterAxisType(CamBuilder.AxisJointType) - Method in interface nxopen.mechatronics.CamBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMasterAxisType(GraphControlBuilder.MasterJointType) - Method in interface nxopen.mechatronics.GraphControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMasterBaseType(GraphControlBuilder.MasterType) - Method in interface nxopen.mechatronics.GraphControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMasterExpressionValues(Expression[]) - Method in interface nxopen.geometricutilities.SecondarySectionData
-
Set the Master Sketch Expression Values.
- setMasterFileName(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setMasterModelCncPartName(String) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setMasterModelEdmPartName(String) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setMasterModelPartName(String) - Method in interface nxopen.tooling.EjectorTableBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setMasterMultiple(double) - Method in interface nxopen.mechatronics.GearBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMasterOpLabel(String) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMasterPart(BasePart) - Method in interface nxopen.pdm.PartOperationCreateBuilder
-
Sets the Master Part
Use this only in case the part your are trying to create supports master model.
- setMasterPath(IPath) - Method in interface nxopen.routing.OffsetPath
-
The master path object for this offset object.
- setMasterSymbolFilePaths(String[]) - Method in interface nxopen.drawings.AddObjectsToRegionBuilder
-
Set the master symbol paths
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setMasterSymbolName(String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMasterSymbolNameInQaf() - Method in interface nxopen.annotations.AnnotationManager
-
This method writes master custom symbol name
to the predefined quick access folder and saves the part.
- setMasterSymbolPath(String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMasterType(PreferencesBuilder.MasterTypes) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMasterUnit(CamProfileBuilder.MasterValueUnit) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMasterUnit(GraphControlBuilder.MasterValueUnit) - Method in interface nxopen.mechatronics.GraphControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMasterUnit(MotionProfileBuilder.MasterValueUnit) - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMatchBy(DurSpecialistSuperpositionEventBuilder.MatchByType) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMatchCut(DieEngTrimTaskBuilder.TrimTaskMatchCutType) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchCutAngle(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Sets the match cut dimension angle value.
- setMatchCutExtensionAngle(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the match cut extension angle dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchCutFirstRadius(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the match cut first radius dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchCutFirstRadius(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Sets the match cut dimension first radius value.
- setMatchCutNotchOffset(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the match cut notch offset dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchCutNotchOffset(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Sets the match cut dimension notch offset value.
- setMatchCutOffsetFromPlane(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the match cut offset from plane dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchCutOffsetFromPlane(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Sets the match cut dimension offset from plane value.
- setMatchCutOffsetLength(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the match cut offset length dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchCutOffsetLength(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Sets the match cut dimension offset length value.
- setMatchCutScrapCutterLength(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the match cut scrap cutter length dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchCutScrapCutterLength(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Sets the match cut dimension scrap cutter length value.
- setMatchCutSecondRadius(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the match cut second radius dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchCutSecondRadius(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Sets the match cut dimension second radius value.
- setMatchCutThirdRadius(double) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the match cut third radius dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchCutThirdRadius(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Sets the match cut dimension third radius value.
- setMatchCutType(TrimTaskBuilder.MatchCutTypes) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the match cut type of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatchDimOfStartHole(boolean) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMatchDimOfStartHole(boolean) - Method in interface nxopen.geometricutilities.MiddleHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMatchedEntity(NXObject) - Method in interface nxopen.features.MatchedReferenceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMatchedReference(NXObject, NXObject, boolean) - Method in interface nxopen.userdefinedtemplate.InstantiationBuilder
-
Set the matched reference of an original reference in User Defined Template
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- setMatchedStatus(MatchedReferenceBuilder.ResolvedStatus) - Method in interface nxopen.features.MatchedReferenceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMatchEndToEnd(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setMatchExact(boolean) - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setMatchExactType(MatchEdgeBuilder.MatchExact) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMatchFace(boolean) - Method in interface nxopen.facet.RemoveUndercutsBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setMatchFace(MultiFlangeBuilder.MatchFaceOptions) - Method in interface nxopen.features.sheetmetal.MultiFlangeBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setMatchFaceOption(FlangeBuilder.MatchFaceOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Sets the match face selection type.
- setMatching(DurSpecialistSuperpositionEventBuilder.MatchingType) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMatchingForIndex(int, NXObject) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Set the matching reference using the index into the feature references
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMatchingForParent(NXObject, NXObject) - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Set the matching reference using the parent to match in the feature references
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMatchingOption(DraftBodyBuilder.MatchOption) - Method in interface nxopen.features.DraftBodyBuilder
-
- setMatchingUpdate(DurSpecialistEvent.UpdateCriterionType) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMatchKnots(StudioSplineBuilder.MatchKnotsType) - Method in interface nxopen.features.StudioSplineBuilder
-
- setMatchKnotsType(StudioSplineBuilderEx.MatchKnotsTypes) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMatchPlane(Plane) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setMatchPointOne(Point) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMatchPointThree(Point) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMatchPointTwo(Point) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMatchScope(DraftBodyBuilder.MatchingScope) - Method in interface nxopen.features.DraftBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMatchSheetBoundariesOnly(boolean) - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
License requirements: None.
- setMatchType(DraftBodyBuilder.MatchingType) - Method in interface nxopen.features.DraftBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMatchUsing(DurSpecialistSuperpositionEventBuilder.MatchUsingType) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMatchWith(String) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMateCsys(NXObject) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setMaterial(AreaFillMaterial) - Method in interface nxopen.annotations.HatchBuilder
-
- setMaterial(AreaFillMaterial) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMaterial(PhysicalMaterial) - Method in interface nxopen.cae.connections.IMaterial
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMaterial(PhysicalMaterial) - Method in interface nxopen.cae.MaterialOptions
-
Sets
License requirements: None.
- setMaterial(String) - Method in interface nxopen.cam.FeatureGeomBuilder
-
Set part material
License requirements: cam_base ("CAM BASE")
.
- setMaterial(String) - Method in interface nxopen.cam.ToolBuilder
-
Set tool material
License requirements: cam_base ("CAM BASE")
.
- setMaterial(SteelDistributionBuilder.SaMaterial) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setMaterial(CollisionMaterial) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMaterial(PhysicalMaterial) - Method in interface nxopen.motion.CustomizedMaterialBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMaterial(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the material standard
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setMaterial(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
The material standard
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setMaterial(ElectrodeBlankBuilder.BlankMaterial) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setMaterial(InitProjectBuilder.MaterialId) - Method in interface nxopen.tooling.InitProjectBuilder
-
License requirements: None.
- setMaterial(Tag, String) - Method in interface nxopen.uf.UFCam
-
- setMaterialByName(String) - Method in interface nxopen.cae.LaminatePly
-
Sets the material by name.
- setMaterialCategory(String) - Method in interface nxopen.PhysicalMaterial
-
Sets the material category using international character set
License requirements: None.
- setMaterialCondition(DatumReferenceBuilder.DatumReferenceMaterialCondition) - Method in interface nxopen.annotations.DatumReferenceBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setMaterialConditionModifiers(MaterialConditionModifier[]) - Method in interface nxopen.annotations.DatumReference
-
Sets the material condition modifiers
License requirements: None.
- setMaterialConditionModifiers(MaterialConditionModifier[]) - Method in interface nxopen.annotations.FcfFrame
-
- setMaterialDBDir(String) - Method in interface nxopen.cae.connections.ComposerData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMaterialDefinitionType(StrengthStressMaterialDefinitionMethod) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setMaterialEditable(boolean) - Method in interface nxopen.PhysicalMaterial
-
Sets whether a material can be modified or not.
- setMaterialGradeName(String) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setMaterialGradeOption(int) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setMaterialInherited(boolean) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaterialInherited(boolean) - Method in interface nxopen.cae.MaterialOptions
-
Sets
License requirements: None.
- setMaterialInterpolationOption(TBSTopologySensitivityOptimizationParameters.MaterialInterpolation) - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setMaterialLibrary(String) - Method in interface nxopen.PhysicalMaterialBuilder
-
License requirements: None.
- setMaterialMergeOption(SolverAppendOption.MergeOption) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMaterialModifier(FeatureControlFrameDataBuilder.ToleranceMaterialModifier) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setMaterialName(String) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMaterialName(String) - Method in interface nxopen.display.CgfxMattexBuilder
-
- setMaterialName(String) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setMaterialName(String) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setMaterialName(String) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialOption(int) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setMaterialOrientationState(ShellEADBuilder.State) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMaterialOutsideLoop(boolean) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMaterialOverrideOption(boolean) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setMaterialProperties(String[]) - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
Sets the material properties
License requirements: None.
- setMaterialPropertyDensity(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyDensity(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyE(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyE(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyF(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyF(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyInitialStrain(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyInitialStrain(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyK(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyK(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyN(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyN(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyPoisson(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyPoisson(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyR0(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyR0(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyR45(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyR45(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyR90(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyR90(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialPropertyValue(String, boolean, PhysicalMaterial) - Method in interface nxopen.BasePropertyTable
-
Sets the material value
License requirements: None.
- setMaterialPropertyYieldStress(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialPropertyYieldStress(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterials(PhysicalMaterial[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set materials to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMaterials(DirectUnfoldBuilder.MatType) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
- setMaterialSafetyFactor(double) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setMaterialSide(GeometrySet.MaterialSideTypes) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setMaterialSide(TabBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Sets the material side value of secondary tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setMaterialSource(DurSpecialistSolutionBuilder.MaterialSourceType) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaterialSource(DurSpecialistSolutionBuilder.MaterialSourceType) - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaterialTag(PhysicalMaterial) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaterialTag(PhysicalMaterial) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaterialTag(PhysicalMaterial) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaterialType(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
License requirements: None.
- setMaterialType(TrimLineDevelopmentBuilder.MaterialTypeName) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialType(AeroFlangeBuilder.MatType) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
Set the material type of the flange
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMaterialType(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setMaterialTypeOption(LsdynaGeometryPreparationBuilder.MaterialType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaterialTypes(ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setMaterialUtil(String) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setMaterialUtilization(String) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setMateSetting(ObjectBuilder.Mate) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
License requirements: None.
- setMathNames(String[]) - Method in interface nxopen.features.MathIntegrationBuilder
-
Set the math names corresponding to expressions in the Math Interface Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMathPlotData(int, double, double) - Method in interface nxopen.cae.FunctionBuilder
-
Sets plot data setting for a math function.
- setMatlabFileBrowser(String) - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMATLABInformation(String, MATLABClientBuilder.TagInfo[]) - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
Set the object information into MATLAB Data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMATLABServerProgID(String) - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMATLABSignalName(String) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMATLABSignalPort(MATLABClientBuilder.DataPortType) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMATLABSignalType(MATLABSignalConnectionBuilder.DataType) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMatOriMethod() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the get selection ori operator gets material orientation method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMatrix(Matrix3x3) - Method in interface nxopen.die.QuickBinderWrapBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMatrix(Matrix3x3) - Method in interface nxopen.IPlane
-
License requirements: None.
- setMatrixPropertyValue(String, ScalarMatrixValue) - Method in interface nxopen.BasePropertyTable
-
Set a matrix cell value from the matrix value of the property
License requirements: None.
- setMax(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
License requirements: None.
- setMaxAcceleration(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setMaxAngleToggle(boolean) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMaxAngleValue(double) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMaxAngularIncr(double) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMaxAngularIncrement(double) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMaxArraySize(int) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setMaxCheckingAngle(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMaxCheckingDist(double) - Method in interface nxopen.features.RefitFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMaxCheckingDistance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMaxConstraintViolation(double) - Method in interface nxopen.cae.optimization.DAOStopCondition
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMaxDeceleration(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setMaxDepthToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setMaxDisplayObjects(int) - Method in interface nxopen.validate.Parser
-
License requirements: None.
- setMaxDistanceToOuterMargin(double) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaxEdgeLengthOption(boolean) - Method in interface nxopen.cae.Shell2SolidBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMaxEdges(int) - Method in interface nxopen.facet.FillHoleBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMaxFacingDiameterToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setMaxGapDist(double) - Method in interface nxopen.cam.LaserProfileMove
-
License requirements: cam_base ("CAM BASE")
.
- setMaximum(double) - Method in interface nxopen.cam.ContourAngle
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumAlternatingStress(DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaximumAngle(double) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumAngle(double) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaximumAreaMode(RoughFinishTurningBuilder.MaximumAreaModes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumAreaSize(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumAreaUnit(RoughFinishTurningBuilder.MinmaxAreaUnits) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumAverage(double) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumBendRadius(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMaximumCenterlineWidth(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMaximumCharacterCount(int) - Method in interface nxopen.cae.xyplot.AxisItemStyle
-
License requirements: None.
- setMaximumCharactersAccepted(int) - Method in interface nxopen.blockstyler.MultilineString
-
License requirements: None.
- setMaximumCheckingDistance(double) - Method in interface nxopen.facet.MultiPatchAlignmentBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMaximumCsysFaceNormalAngle(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Maximum CSYS Face Normal Angle
License requirements: ugweld ("UG WELD")
.
- setMaximumDegree(int) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setMaximumDegree(int) - Method in interface nxopen.features.JoinCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMaximumDegree(int) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setMaximumDegree(int) - Method in interface nxopen.geometricutilities.CurveFitOptions
-
Sets the maximum degree method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMaximumDegree(int) - Method in interface nxopen.geometricutilities.Rebuild
-
Sets the maximum degree when rebuild type is advanced.
- setMaximumDeviation(double) - Method in interface nxopen.facet.FacetBodyFromBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMaximumDeviation(double) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaximumDistanceToGeometry(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setMaximumDistanceTolerance1(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMaximumDistanceTolerance2(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMaximumElementSize(double) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMaximumExcludedObjects(int) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMaximumExtensionDistance(double) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setMaximumFaceGap(double) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setMaximumGap(double) - Method in interface nxopen.die.CompensateRoughDataBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMaximumGapToGeometry(double) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setMaximumHeight(double) - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setMaximumHeight(int) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setMaximumHeight(int) - Method in interface nxopen.blockstyler.MultilineString
-
License requirements: None.
- setMaximumHeight(int) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setMaximumHeight(int) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setMaximumIterationNumber(int) - Method in interface nxopen.cae.optimization.TBSStopCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setMaximumLabelEnabled(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setMaximumLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumLeadAngleType(ToolAxisVariable.MaximumLeadAngleTypes) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumLegendItemCount(int) - Method in interface nxopen.cae.xyplot.LegendTableStyle
-
License requirements: None.
- setMaximumLegendsInGraph(int) - Method in interface nxopen.cae.xyplot.Preference
-
- setMaximumLevel(double) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumNumberLoosePanels(WeldAdvisorCustomerDefault, int) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Maximum Number of Loose Panels
License requirements: ugweld ("UG WELD")
.
- setMaximumNumberOfFacesSearched(int) - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
License requirements: None.
- setMaximumPathLength(double) - Method in interface nxopen.routing.electrical.Connection
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setMaximumPointFaceDistance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Maximum Point Face Distance
License requirements: ugweld ("UG WELD")
.
- setMaximumPrincipalAngle(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaximumPrincipalStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaximumPrincipalStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaximumRadius(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMaximumRadius(double) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumRadiusMode(InspectionMethodBuilder.PolarRadiusModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMaximumRadiusMode(InspectionMethodBuilder.PolarRadiusModeTypes) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMaximumRadiusPoint(Point) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: None.
- setMaximumRecentReportDocumentCount(int) - Method in interface nxopen.report.ReportPreference
-
License requirements: None.
- setMaximumScopeAsString(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setMaximumScopeAsString(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setMaximumScopeAsString(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setMaximumScopeAsString(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setMaximumSegment(int) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setMaximumSegments(int) - Method in interface nxopen.features.JoinCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMaximumSegments(int) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setMaximumSegments(int) - Method in interface nxopen.geometricutilities.CurveFitOptions
-
Sets the maximum segments method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMaximumSegments(int) - Method in interface nxopen.geometricutilities.Rebuild
-
Sets the maximum segments when rebuild type is advanced.
- setMaximumShearStrain(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaximumShearStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaximumSingleThickness(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMaximumSize(double) - Method in interface nxopen.diagramming.tables.ContinuationDataBuilder
-
License requirements: None.
- setMaximumSizeMode(RoughFinishTurningBuilder.MinmaxSizeModes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumSolutions(int) - Method in interface nxopen.preferences.RoutingPart
-
Sets the maximum number of placement solutions to generate when determining
placement solutions for a component.
- setMaximumSpacing(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMaximumSpacing(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMaximumSpacingBetweenPoints(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMaximumStackUpGap(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Maximum Stack Up Gap
License requirements: ugweld ("UG WELD")
.
- setMaximumStringLength(int) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setMaximumSubGraphsInStack(int) - Method in interface nxopen.cae.xyplot.Preference
-
License requirements: None.
- setMaximumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setMaximumTextCount(int) - Method in interface nxopen.cae.xyplot.VectorStyle2DSetting
-
License requirements: None.
- setMaximumTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setMaximumTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setMaximumTolerance(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setMaximumToleranceValue(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setMaximumTotalMetalThickness(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Maximum Total Metal Thickness
License requirements: ugweld ("UG WELD")
.
- setMaximumValue(double) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setMaximumValue(double) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setMaximumValue(double) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setMaximumValue(int) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setMaximumValue(double) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setMaximumValue(double) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setMaximumValue(double) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setMaximumValue(double) - Method in interface nxopen.report.DoubleArgument
-
License requirements: None.
- setMaximumValue(int) - Method in interface nxopen.report.IntegerArgument
-
License requirements: None.
- setMaximumValues(int, int, double[]) - Method in interface nxopen.blockstyler.DoubleTable
-
Sets the MaximumValues
License requirements: None.
- setMaximumValues(int, int, int[]) - Method in interface nxopen.blockstyler.IntegerTable
-
Sets the MaximumValues
License requirements: None.
- setMaximumVelocity(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setMaximumWallThickness(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setMaximumWidth(int) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setMaxInclusive(boolean) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setMaxInteger(int) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setMaxIteration(int) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setMaxIteration(int) - Method in interface nxopen.motion.AdamsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setMaxIterations(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setMaxIterations(int) - Method in interface nxopen.cae.optimization.DAOStopCondition
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMaxKinematicIteration(int) - Method in interface nxopen.motion.AdamsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setMaxLength(int) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaxLengthIncr(double) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMaxLengthIncrement(double) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMaxLineThickness(double) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setMaxLineThickness(double) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setMaxMeanRange(double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaxNeedleLength(double) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setMaxNominalRange(double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMaxNumber(double) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setMaxNumberIteration(int) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setMaxNumberOfCurves(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setMaxParamId(int) - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMaxRatioLongFacets(double) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMaxSignalId(int) - Method in interface nxopen.mechatronics.SignalAdapterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMaxSpacing(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMaxStaticIteration(int) - Method in interface nxopen.motion.AdamsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setMaxString(String) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setMaxSubdivisionType(FluidDomainBuilder.SubdivisionType) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setMaxSystem3DModelSpace(boolean) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setMaxSystemPointRes(boolean) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setMaxTextLength(int) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setMaxThreeDMdlSpace(double) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setMaxTiltAngle(double) - Method in interface nxopen.cam.LaserProfileMove
-
License requirements: cam_base ("CAM BASE")
.
- setMaxTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- setMaxTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltMachine
-
License requirements: None.
- setMaxTime(int) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setMaxTimeIncr(double) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMaxToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMaxToolAxisChange(double) - Method in interface nxopen.cam.NcmScBuilder
-
- setMaxToolAxisChange(double) - Method in interface nxopen.cam.NcmTransfer
-
License requirements: cam_base ("CAM BASE")
.
- setMaxToolAxisChange(double) - Method in interface nxopen.cam.ToolPathTiltMachine
-
License requirements: None.
- setMaxToolReachToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setMaxUser3DModelSpace(double) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setMaxUserPointRes(double) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setMaxValue(double) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMaxWallHeight(double) - Method in interface nxopen.cam.ToolAxisTilt
-
License requirements: cam_base ("CAM BASE")
.
- setMCDConnection(boolean, String, TaggedObject) - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
This method is used to set the MCD connected object to the specified axis or machine event
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMcdMechanicalData(SIZERExportBuilder.MCDMechanicalData[]) - Method in interface nxopen.tooling.SIZERExportBuilder
-
Sets all groups of mechanical data in MCD mode.
- setMcfPath(String) - Method in interface nxopen.sim.KinematicImportMcfBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setMcs(CartesianCoordinateSystem) - Method in interface nxopen.cam.OrientGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMcsCsys(CoordinateSystem) - Method in interface nxopen.cam.InspectionImportDmisBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMcsDisplay(boolean) - Method in interface nxopen.cam.CAMSession
-
Set MCS display
License requirements: cam_base ("CAM BASE")
.
- setMcsSpindleGroup(NCGroup) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setMctTurrentId(String) - Method in interface nxopen.cam.MachineTurretGroupBuilder
-
License requirements: None.
- setMctTurrentWpl(CartesianCoordinateSystem) - Method in interface nxopen.cam.MachineTurretGroupBuilder
-
- setMctTurrentWplType(MachineTurretGroupBuilder.MctTurrentWplTypes) - Method in interface nxopen.cam.MachineTurretGroupBuilder
-
- setMdfFileName(String) - Method in interface nxopen.cae.DurabilityTransientEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMdynamics(MachineToolConfiguration.MdynamicsTypes) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the Mdynamics value
License requirements: None.
- setMeaFile(String) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMeasure(InverseBendingLinesBuilder.MeasureType) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setMeasureAlong(OrientationPointMethodsBuilder.MeasureAlongTypes) - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setMeasureAlongMode(StiffenerSystemBuilder.MeasureAlongModes) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setMeasureAngles(OrientationDefinitionBuilder.MeasureAngleTypes) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setMeasuredGeometry(NXObject) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMeasuredGeometry(NXObject) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMeasuredPartName(String) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMeasureFrom(NcmScEngRetBuilder.MeasureFromTypes) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMeasurementDefaultHeight(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the default height of the object for measurement to be created.
- setMeasurementDefaultWidth(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the default width of the object for measurement to be created.
- setMeasurementDepth(double) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setMeasurementDirection(Direction) - Method in interface nxopen.annotations.Dimension
-
Sets the measurement direction.
- setMeasurementDirection(Direction) - Method in interface nxopen.annotations.DimensionData
-
Sets the measurement direction
License requirements: None.
- setMeasurementDirectionView(View) - Method in interface nxopen.annotations.Dimension
-
Sets the measurement direction view.
- setMeasurementDirectionView(View) - Method in interface nxopen.annotations.DimensionData
-
Sets the measurement direction view
License requirements: None.
- setMeasurementHoleSize(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the hole_size of the object for measurement to be created.
- setMeasurementIdLowerRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMeasurementIdUpperRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMeasurementMethod(HeadImpactAPillarDetailBuilder.MeasurementMethodType) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setMeasurementMethod(DeviationGaugeBuilder.MeasurementMethodType) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMeasurementNamePrefix(String) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMeasurementObjectColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMeasurementObjectLayer(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMeasurementPartNumber(String) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMeasurementSamples(int) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMeasurementSelectedPrefix(String[]) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
The measurement selected prefix
License requirements: ugweld ("UG WELD")
.
- setMeasurementSelectedSuffix(String[]) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Selected measurement suffix
License requirements: ugweld ("UG WELD")
.
- setMeasurementSlotLength(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the slot height of the object for measurement to be created.
- setMeasurementSlotWidth(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the slot width of the object for measurement to be created.
- setMeasurementStudSize(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the stud size of the object for measurement to be created.
- setMeasurementType(Dimension.MeasurementTypes) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setMeasurementType(Dimension.MeasurementTypes) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setMeasurementType(SearchCriteriaDimensionBuilder.MeasurementTypes) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setMeasurementType(ProbeInspectSurfacePointMoveBuilder.Measurement) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
License requirements: None.
- setMeasurementType(LinkCouplerCoupleBuilder.MeasurementChoices) - Method in interface nxopen.motion.LinkCouplerCoupleBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMeasureName(String) - Method in interface nxopen.cae.ftk.BaseUnit
-
Sets measure name
License requirements: None.
- setMeasureOfValue(UFVariant, String) - Method in interface nxopen.uf.UFKf
-
- setMeasureOption(boolean) - Method in interface nxopen.motion.PostProcess
-
Set measure option animation/articulation/spreadsheet run
License requirements: mechanisms ("MECHANISMS")
.
- setMeasureType(AccelerometerBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.AccelerometerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMeasureType(DistanceSensorBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMeasureType(GenericSensorBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.GenericSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMeasureType(InclinometerBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.InclinometerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMeasureType(PositionSensorBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.PositionSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMeasureType(VelocitySensorBuilder.OutputMeasureType) - Method in interface nxopen.mechatronics.VelocitySensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMeasuringPoint(Point) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setMeasuringPosition(TurnRoughFinishTestCut.MeasuringPositionTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setMechanicalData(SIZERExportBuilder.MechanicalData[]) - Method in interface nxopen.tooling.SIZERExportBuilder
-
Sets all groups of mechanical data in Motion mode.
- setMechatronicsType(MechatronicsBuilder.MechatronicsModelType) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMemberData(PartFamilyMemberValues[]) - Method in interface nxopen.PartFamilyMemberData
-
- setMemberFeatures(Feature[]) - Method in interface nxopen.features.DeformDefinitionBuilder
-
Sets the list of member feature records for deform definition feature.
- setMemberLayers(int[]) - Method in interface nxopen.layer.Category
-
Sets which layers belong to the category
License requirements: None.
- setMemberName(String) - Method in interface nxopen.routing.ChoosePartPluginData
-
Sets the Member Name of the part choosen by the user.
- setMembers(SetObject[]) - Method in interface nxopen.cae.CAESet
-
Sets the objects in the set.
- setMemberValues(String[]) - Method in interface nxopen.PartFamilyMemberValues
-
- setMemorySection(MemorySectionType) - Method in interface nxopen.ame.PlcSymbolBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setMenu(TreeListMenu) - Method in interface nxopen.blockstyler.Tree
-
Sets the menu, resulting the menu to appear on the screen.
- setMenu(TreeListMenu) - Method in interface nxopen.blockstyler.Wizard
-
Set the menu items for the popup menu for a step, sub-node or the background
in the Task Navigator.
- setMergeAngleTolerance(double) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
License requirements: None.
- setMergeCellsWithSameSize(boolean) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMergeDuplicateRcps(RoutingPath.MergeDupRcps) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setMergeDupNode(boolean) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMergeEdges(boolean) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMergeEdgeSetting(boolean) - Method in interface nxopen.cae.AutoHealGeometryBuilder
-
License requirements: None.
- setMergeFaces(boolean) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setMergeFacesIfPossible(boolean) - Method in interface nxopen.features.LawExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setMergeFacesIfPossible(boolean) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setMergeFacesIfPossible(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setMergeFacesOption(boolean) - Method in interface nxopen.features.VarsweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMergeOccurrenceNodes(boolean) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMergeOutput(boolean) - Method in interface nxopen.tooling.RemoveHolesBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMergePrevious(boolean) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: None.
- setMergeSheets(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setMergeSolids(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setMergeType(SmoothCurveStringBuilder.MergeTypes) - Method in interface nxopen.features.SmoothCurveStringBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMesh(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshAttemptMapping(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMeshAttemptMapping(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMeshCollector(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshCollectorName(String) - Method in interface nxopen.cae.ElementModifyTypeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshCollectorName(String) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshCollectorName(String) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshCollectorName(MeshCollector, String) - Method in interface nxopen.cae.MeshManager
-
Renames a mesh collector object
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshContext(Mesh) - Method in interface nxopen.cae.ThicknessBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshCreateOption(Mesh0dBuilder.MeshCreationType) - Method in interface nxopen.cae.Mesh0dBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshCreationMode(AlternateFemRepresentationSource.CreateMeshMode) - Method in interface nxopen.cae.AlternateFemRepresentationSourceBuilder
-
Sets the mesh creation mode
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMeshDensityType(CAEWeldConnectionBuilder.MeshDensityTypeEnum) - Method in interface nxopen.cae.CAEWeldConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshElementSize(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMeshElementSize(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMeshElementType(OnestepUnformBuilder.MeshElement) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMeshElementType(TrimLineDevelopmentBuilder.MeshElement) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMeshes(PostMesh[]) - Method in interface nxopen.cae.PostShowhideBuilder
-
Sets the mesh objects to be shown or hidden .Visibility to be set SetVisibility
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX11.0.2
- setMeshesToPlot(Mesh[]) - Method in interface nxopen.cae.ThicknessPlotContoursBuilder
-
Sets
Mesh
objects to plot.
- setMeshGradation(double) - Method in interface nxopen.cae.Shell2SolidBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshMateSize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshMatingOption(MMCCreateBuilder.MeshMatingType) - Method in interface nxopen.cae.MMCCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshMaxJacobian(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMeshMaxJacobian(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMeshMaxWarp(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMeshMaxWarp(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMeshName(String) - Method in interface nxopen.cae.ElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshName(String) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshName(String) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshName(String) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshName(String) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshName(String) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshName(String) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshName(String) - Method in interface nxopen.cae.PrimitiveRecipeMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshName(String) - Method in interface nxopen.cae.SpiderElementBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshPath(String) - Method in interface nxopen.cae.connections.ComponentData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshPointToEdit(MeshPoint) - Method in interface nxopen.cae.MeshPointBaseBuilder
-
License requirements: None.
- setMeshPreferences(NXColor, double, int, double, int) - Method in interface nxopen.cae.FemPart
-
Sets the mesh preferences data associated with the fem part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMeshProcessFillet(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMeshProcessFillet(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMeshSizeFactor(double) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setMeshSizeVariation(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMeshSizeVariation(double) - Method in interface nxopen.cae.Shell2SolidBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshSizeVariation(int) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMeshSmallFeature(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMeshSmallFeature(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMeshSmoothStrategy(TBSMeshSmooth.Strategy) - Method in interface nxopen.cae.optimization.TBSMeshSmooth
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setMeshSplitQuad(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setMeshSplitQuad(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMeshTopologyOption(MeshTransformerBuilder.MeshTopologyType) - Method in interface nxopen.features.MeshTransformerBuilder
-
License requirements: None.
- setMeshType(DependentMeshBuilder.MeshType) - Method in interface nxopen.cae.DependentMeshBuilder
-
The mesh type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMeshVisuals(Tag, UFSf.MeshVisuals) - Method in interface nxopen.uf.UFSf
-
- setMessages(Step242Importer.MessageEnum) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setMessagesInconsistentRevisions(SessionPdm.MessagesInconsistentRevisionsType) - Method in interface nxopen.preferences.SessionPdm
-
License requirements: None.
- setMetaSolutionName(String) - Method in interface nxopen.cae.DurabilityMetaSolutionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMethod(DimensionMeasurementBuilder.MeasurementMethod) - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setMethod(DimensionSetBuilder.DimensionSetMethod) - Method in interface nxopen.annotations.DimensionSetBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setMethod(ElementConnectivityBuilder.Methods) - Method in interface nxopen.cae.ElementConnectivityBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMethod(ElementTranslateBuilder.MethodType) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMethod(ModelUpdateOptimOptionsBuilder.MethodChoice) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setMethod(BoundaryTurnMemberOffset.MethodType) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setMethod(InPathEventDataBuilder.LocationMethod) - Method in interface nxopen.cam.InPathEventDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMethod(ToolAxisChange.MethodTypes) - Method in interface nxopen.cam.ToolAxisChange
-
License requirements: cam_base ("CAM BASE")
.
- setMethod(SheetBordersAndZonesBuilder.ZoneMethod) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setMethod(Method) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setMethod(AddSurfBuilder.Methods) - Method in interface nxopen.die.AddSurfBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMethod(NonProportionalZoom.MethodType) - Method in interface nxopen.display.NonProportionalZoom
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setMethod(BordersAndZonesBuilder.ZoneMethod) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setMethod(Method) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMethod(ChamferBuilder.OffsetMethod) - Method in interface nxopen.features.ChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMethod(OffsetEdgeBuilder.OffsetEdgeMethod) - Method in interface nxopen.features.OffsetEdgeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMethod(InverseBendingLinesBuilder.MethodType) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setMethod(VariableOffsetBuilder.MethodOptions) - Method in interface nxopen.features.VariableOffsetBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMethod(CurveCurvatureAnalysisBuilder.CalculationMethod) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setMethod(SpineDefinitionBuilder.MethodOptions) - Method in interface nxopen.geometricutilities.SpineDefinitionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMethod(PlaneTypes.MethodType) - Method in interface nxopen.IPlane
-
Sets a plane type
License requirements: None.
- setMethod(CreateComponentFrom3DBuilder.CreateMethod) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setMethod(BendCornerTypeBuilder.BendMethod) - Method in interface nxopen.mechanicalrouting.BendCornerTypeBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setMethod(ModelingViewHighQualityImage.ShadeMethod) - Method in interface nxopen.ModelingViewHighQualityImage
-
Sets the method to use for the generation of the High Quality Image.
- setMethod(LinkCouplerBuilder.MethodChoices) - Method in interface nxopen.motion.LinkCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setMethod(WeldArcMethod) - Method in interface nxopen.weld.GrooveBuilder
-
- setMethod(WeldGrooveBuilder.SkipWeldMethod) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMethodChoice(PreTestExciterConfigBuilder.MethodChoiceType) - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setMethodEnum(InspectionConstructedFeatureBuilder.MethodEnumType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMethodkey(String) - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMethodName(String) - Method in interface nxopen.ame.PlcMethodBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setMethodOption(ElementExtrudeBuilder.MethodType) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMethodOption(ElementProjectBuilder.MethodType) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMethodOption(NodeProjectBuilder.ProjectionMethodType) - Method in interface nxopen.cae.NodeProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMethodOption(NodeTranslateBuilder.MethodType) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMethodType(BeamSectionOrientationOptions.Method) - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMethodType(CAEConnectionBuilder.MethodTypeEnum) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMethodType(ShipMeshAutomationBuilder.MeshingMethodType) - Method in interface nxopen.cae.ShipMeshAutomationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling"), nx_ship_basic ("Ship Basic Design")
.
- setMethodType(InspectionMethodBuilder.MethodTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMethodType(SelPref.Method) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setMethodType(JointDefine.ScrewJointMethodType) - Method in interface nxopen.motion.JointDefine
-
License requirements: None.
- setMethodType(MoldInsertBuilder.BooleanType) - Method in interface nxopen.tooling.MoldInsertBuilder
-
License requirements: None.
- setMetricNominalDecimalPlaces(int) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the number of decimal places for the nominal value of a metric dimension.
- setMetricScale(ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setMetricSheetTemplateLocation(String) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMetricToleranceDecimalPlaces(int) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the number of decimal places for the metric tolerance value of a dimension.
- setMfgFeatureGroup(Feature) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setMiddle(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
License requirements: None.
- setMiddleFaceCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMiddleFaceNormFlag(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMiddlePlane(TBSCastCondition.MiddlePlaneType) - Method in interface nxopen.cae.optimization.TBSCastCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setMiddlePlane(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setMiddlePlanePoint(Point) - Method in interface nxopen.cae.optimization.TBSCastCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setMiddleScale(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
License requirements: None.
- setMidnode(boolean) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMidNode(boolean) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMidNodeMove(boolean) - Method in interface nxopen.cae.NodeAlignBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMidNodeOption(MappedMeshBuilder.MidNodeType) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMidnodeType(ElementModifyOrderBuilder.Midnode) - Method in interface nxopen.cae.ElementModifyOrderBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMidpoint(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setMidpointCoords(int, Point2d) - Method in interface nxopen.geometricutilities.ShapeFrameBuilder
-
Sets the coordinates of the i-th midpoint of the frame with respect to the plane
License requirements: None.
- setMidPointOptions(AssociativeArcBuilder.MidOption) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMidPointReference(AssociativeArcBuilder.MidReference) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMids(boolean) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setMidsrfFeatureCreateMethod(Tag, int) - Method in interface nxopen.uf.UFModlFeatures
-
- setMidThicknessColor(NXColor) - Method in interface nxopen.cae.ThicknessBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMillPocketLocation(ConvertFromMCDBuilder.PocketLocationTypes) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMillPocketNumber(int) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMimimumNumberPointsOnOverlap(int) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMimimumValue(double) - Method in interface nxopen.report.DoubleArgument
-
License requirements: None.
- setMin(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
License requirements: None.
- setMinAngle(double) - Method in interface nxopen.cam.TurnCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setMinAngleFoldedFacets(double) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMinAngleToggle(boolean) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMinAngleValue(double) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMinBendRadius(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Sets the min bend radius of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setMinBoringDiameterToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setMinDampingStatus(boolean) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setMinElemThickness(double) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setMinFacingDiameterToggle(boolean) - Method in interface nxopen.cam.TurningToolBuilder
-
License requirements: None.
- setMinimalGraphicsWindow(boolean) - Method in interface nxopen.uf.UFUi
-
- setMinimalGraphicsWindowLocation(int, int, int, int) - Method in interface nxopen.uf.UFUi
-
- setMinimalRadius(double) - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setMinimalSegmentLength(double) - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setMinimizeNumberOfEngages(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setMinImprovement(double) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setMinimum(double) - Method in interface nxopen.cam.ContourAngle
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumAngle(double) - Method in interface nxopen.cam.Cutcom
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumAngle(double) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumAngleFoldedFacets(double) - Method in interface nxopen.facet.ConvertFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMinimumAngleFoldedFacets(double) - Method in interface nxopen.facet.STLImportBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMinimumArcToleranceInFlatSolid(boolean, double) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the minimum arc tolerance during Flat Solid simplification
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setMinimumArcToleranceInFlatSolid(boolean, double) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the minimum arc tolerance during Flat Solid simplification
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setMinimumArea(RoughFinishTurningBuilder.MinimumAreaTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumArea(double) - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMinimumAreaSize(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumAreaUnit(RoughFinishTurningBuilder.MinmaxAreaUnits) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumAverage(double) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumBorderLength(double) - Method in interface nxopen.facet.FeatureExtractionBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMinimumCavityDepth(String) - Method in interface nxopen.die.RotorSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setMinimumCheckingMethod(SplinePathBuilder.SplinePathAttributeOptions) - Method in interface nxopen.routing.SplinePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setMinimumClearance(NcmPlanarEngRetBuilder.MinClearanceTypes) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumClosedAngle(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Minimum Closed Angle
License requirements: ugweld ("UG WELD")
.
- setMinimumComponentsForLargeAssemblyOption(int) - Method in interface nxopen.preferences.PartDrafting
-
License requirements: None.
- setMinimumDegree(int) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setMinimumDistance(double) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setMinimumDistanceToGeometry(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setMinimumEdgeDistance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Minimum Edge Distance
License requirements: ugweld ("UG WELD")
.
- setMinimumEdgeDistanceWithSealer(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Minimum Edge Distance With Sealer
License requirements: ugweld ("UG WELD")
.
- setMinimumEdgeLength(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMinimumElementSize(double) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMinimumElementSizeOption(boolean) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setMinimumExtensionLength(String) - Method in interface nxopen.die.RotorSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setMinimumFacetNumber(int) - Method in interface nxopen.facet.STLImportBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMinimumFlangeWidth(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMinimumFlangeWidth(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMinimumGapBetweenAnnotations(double) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setMinimumGapToGeometry(double) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setMinimumGValue(double) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setMinimumHeelClearanceDistance(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumHeight(int) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setMinimumHeight(int) - Method in interface nxopen.blockstyler.MultilineString
-
License requirements: None.
- setMinimumHeight(int) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setMinimumHeight(int) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setMinimumLabelEnabled(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setMinimumLeadAngle(double) - Method in interface nxopen.cam.InterpolateVector
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumLeadAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumLength(double) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMinimumLevel(double) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumNumberOfPoints(int) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMinimumPathLength(double) - Method in interface nxopen.routing.electrical.Connection
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setMinimumPitch(double) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMinimumPitchField(double) - Method in interface nxopen.drawings.ThreadsViewStyle
-
Sets the minimum pitch field.
- setMinimumPitchField(double) - Method in interface nxopen.preferences.ThreadsViewPreferences
-
Sets the minimum pitch field.
- setMinimumPitchFieldData(double) - Method in interface nxopen.drawings.ViewStyleThreadsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMinimumPointDistance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Minimum Spacing
License requirements: ugweld ("UG WELD")
.
- setMinimumRadius(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMinimumRadius(double) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumRadius(double) - Method in interface nxopen.facet.AdjustMinimumRadiusBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMinimumRadius(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMinimumRadius(double) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMinimumRadiusMode(InspectionMethodBuilder.PolarRadiusModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMinimumRadiusMode(InspectionMethodBuilder.PolarRadiusModeTypes) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMinimumRadiusOption(BridgeCurveBuilder.MinRadiusTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setMinimumRadiusPoint(Point) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: None.
- setMinimumRibHeight(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the minimum rib height of the keyway.
- setMinimumRibHeight(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the minimum rib height of keyways.
- setMinimumSegmentLength(double) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setMinimumSizeMode(RoughFinishTurningBuilder.MinmaxSizeModes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumSmallEdgeLength(double) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the minimum small edge length.
- setMinimumSpaceSize(boolean) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setMinimumSpaceSizeValue(String) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setMinimumSpacing(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMinimumSpacingBetweenPoints(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMinimumSubtendedAngle(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMinimumSubtendedAngle(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMinimumTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setMinimumToolClearance(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
Sets minimum tool clearance expression
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setMinimumValue(double) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setMinimumValue(double) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setMinimumValue(double) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setMinimumValue(int) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setMinimumValue(double) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setMinimumValue(double) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setMinimumValue(double) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setMinimumValue(int) - Method in interface nxopen.report.IntegerArgument
-
License requirements: None.
- setMinimumValues(int, int, double[]) - Method in interface nxopen.blockstyler.DoubleTable
-
Sets the MinimumValues
License requirements: None.
- setMinimumValues(int, int, int[]) - Method in interface nxopen.blockstyler.IntegerTable
-
Sets the MinimumValues
License requirements: None.
- setMinimumWallThickness(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setMinimumWebLength(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
Sets minimum Web Length expression
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setMinimumWidth(int) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setMinimumXDimension(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setMinimumXDimension(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setMinimumYDimension(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setMinimumYDimension(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setMinimumZDimension(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setMinimumZDimension(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setMinInclusive(boolean) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setMinInclusive(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setMinInclusive(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setMinInclusive(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setMinInclusive(boolean) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setMinInclusive(boolean) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setMinInclusive(boolean) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setMinInteger(int) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setMinLabel(int) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setMinLength(int) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMinMaxOption(DeviationGaugeBuilder.MinMaxType) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMinMeanRange(double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setMinNodeSize(double[]) - Method in interface nxopen.diagramming.SheetElementBuilder
-
Sets the minimum node size values
License requirements: None.
- setMinNumber(double) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setMinorDiameter(double) - Method in interface nxopen.cam.HoleBossSet
-
License requirements: cam_base ("CAM BASE")
.
- setMinorLinesPerMajor(int) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setMinorLineStyle(GridBuilder.LineStyleType) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setMinorLineWeight(GridBuilder.LineWeightType) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setMinorPoint(Point) - Method in interface nxopen.SketchEllipseBuilder
-
License requirements: None.
- setMinorRadius(double) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMinRad(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMinRadius(double) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setMinSimulationTime(double) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setMinSpacing(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMinString(String) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setMinTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltMachine
-
License requirements: None.
- setMinToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMinValue(double) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMirror(boolean) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
License requirements: None.
- setMirrorApproachOption(MirrorShipStructureBuilder.MirrorApproach) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setMirrorBodyBuilder(MirrorBodyBuilder) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMirrorByType(boolean) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the mirror by type
License requirements: ugweld ("UG WELD")
.
- setMirrorCrossSection(boolean) - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Sets the mirror cross section value.
- setMirrorCsysMethod(LinkedMirrorPartBuilder.MirrorCsysOption) - Method in interface nxopen.LinkedMirrorPartBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMirrorFaces(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
- setMirrorOrientation(MirrorCertificationBuilder.MirrorOrientationType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setMirrorOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMirrorPartName(String) - Method in interface nxopen.LinkedMirrorPartBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMirrorPartType(LinkedMirrorPartBuilder.MirrorPartTypeOption) - Method in interface nxopen.LinkedMirrorPartBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMirrorPartType(Part, LinkedMirrorPartBuilder.MirrorPartTypeOption) - Method in interface nxopen.PartCollection
-
Set the type of linked mirrored part
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMirrorPlane(Plane) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMirrorPlane(ISurface) - Method in interface nxopen.die.FillBuilder
-
Sets the plane to mirror the area fill about
License requirements: die_engineering ("DIE ENGINEERING")
.
- setMirrorPlane(Plane) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMirrorPlane(Plane) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setMirrorPlane(Plane) - Method in interface nxopen.features.subdivision.MirrorCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setMirrorPlane(Plane) - Method in interface nxopen.LinkedMirrorPartBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMirrorPlane(Plane) - Method in interface nxopen.weld.DatumSurfaceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMirrorPlane(Plane) - Method in interface nxopen.weld.TransformBuilder
-
License requirements: ugweld ("UG WELD")
.
- setMirrorPlane(Plane) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the plane that a point is to be mirrored about.
- setMirrorPlaneNormal(Vector3d) - Method in interface nxopen.LinkedMirrorPartBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMirrorPlaneOption(MirrorFaceBuilder.MirrorPlaneOptions) - Method in interface nxopen.features.MirrorFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMirrorPlaneOrigin(Point3d) - Method in interface nxopen.LinkedMirrorPartBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMirrorPmiFlag(boolean) - Method in interface nxopen.LinkedMirrorPartBuilder
-
License requirements: None.
- setMirrorProcedureOptions(StartSymmetricModelingBuilder.MirrorProcedureOption) - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder
-
- setMirrorProfile(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setMirrorRotationPoint(Point) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setMirrorTranslateReferenceObjects(TaggedObject[]) - Method in interface nxopen.weld.WeldPointBuilder
-
Add or remove mirror translate reference objects
License requirements: ugweld ("UG WELD")
.
- setMirrorType(MirrorCertificationBuilder.MirrorSurfaceType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setMirrorX(boolean) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setMirrorY(boolean) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setMisalignedMode(ProfileTransitionBuilder.MisalignedModeType) - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setMismatchBehavior(TypedConnectorFeatureBuilder.BehaviorOnMismatch) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setMissingConditionsBehavior(SimConditionSeqMgr.ImportMissingConditionsBehavior) - Method in interface nxopen.cae.SimConditionSeqMgr
-
Sets the missing parameter behavior during a file import.
- setMiter(boolean) - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setMiterCorner(boolean) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setMiterCorner(boolean) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setMiterCorner(boolean) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setMiterInteriorCornersIfNecessary(boolean) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Sets the miter_corners option.If set to true, it miter bend edges that are larger than default bend radius.
- setMiterOption(LawExtensionBuilderEx.MiterOptions) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setMixedMesh(boolean) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setMmc(MeshMate) - Method in interface nxopen.cae.MMCCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMode(AutomaticTraceline.ModeOption) - Method in interface nxopen.AutomaticTraceline
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setMode(BoundaryTurnMemberOffset.ModeType) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setMode(DriveMode.Type) - Method in interface nxopen.cam.DriveMode
-
License requirements: None.
- setMode(InitialProfilePlunge.Modes) - Method in interface nxopen.cam.InitialProfilePlunge
-
License requirements: cam_base ("CAM BASE")
.
- setMode(LowerLimit.ModeTypes) - Method in interface nxopen.cam.LowerLimit
-
License requirements: cam_base ("CAM BASE")
.
- setMode(ReliefCut.Modes) - Method in interface nxopen.cam.ReliefCut
-
License requirements: cam_base ("CAM BASE")
.
- setMode(TurnRoughFinishLocalReturnBuilder.ModeTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMode(AddRemoveBoxViewBuilder.ModeType) - Method in interface nxopen.drawings.AddRemoveBoxViewBuilder
-
License requirements: None.
- setMode() - Method in interface nxopen.features.shipdesign.SetModeBuilder
-
Loops through all the parts and sets mode to design or manufacturing
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setMode(SubdivisionProjectCageBuilder.ModeOptions) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setMode(PlayMode) - Method in interface nxopen.motion.AnimationControl
-
Sets the animation mode
License requirements: mechanisms ("MECHANISMS")
.
- setMode(int) - Method in interface nxopen.motion.GraphBuilder
-
- setModeAnnotation(int, String) - Method in interface nxopen.cae.ModeSet
-
Modify the annotation of a mode.
- SetModeBuilder - Interface in nxopen.features.shipdesign
-
This class is used to set the mode to design or manufacturing.
- SetModeBuilder.DesMfgMode - Class in nxopen.features.shipdesign
-
Manufacturing Mode type.
- setModeDampingRatio(int, double) - Method in interface nxopen.cae.ModeSet
-
Modify the damping ratio of a mode.
- setModelBasedAlwaysStart(GeneralWorkFlowBuilder.ModelBasedAlwaysStartType) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setModelBasedInsertSheet(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setModelBasedProjectedView(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setModelBounds(Tag, double[]) - Method in interface nxopen.uf.UFDisp
-
- setModelCheck(boolean) - Method in interface nxopen.cae.DurabilityEventSolverBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setModelCheck(boolean) - Method in interface nxopen.cae.DurabilitySolverBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setModelDepthType(HoleMakingBuilder.ModelDepthTypes) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setModeled(boolean) - Method in interface nxopen.routing.TerminalPortBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setModelElementRevision(ModelElementRevision) - Method in interface nxopen.mechanicalrouting.DynamicCutElbowBehaviorBuilder
-
- setModelElementRevision(ModelElementRevision) - Method in interface nxopen.mechanicalrouting.ManageInlineBehaviorBuilder
-
- setModelFile(String) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setModelFile(String) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setModelingObjects(ModelingObjectPropertyTable[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set modeling objects to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setModelingSketchCircles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setModelingTolerance(double) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setModelName(String) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setModelPath(String) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setModelReferencePoint1(Point) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setModelReferencePoint2(Point) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setModelReferencePoint3(Point) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setModelScaleFactor(double) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setModelSelectionType(ResultProbeBuilder.SelectionType) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setModelType(String) - Method in interface nxopen.pdm.PartOperationCreateBuilder
-
Sets the selected Model Type
This is same as the Relation Type that is set by
FileNew.relationType()
and is same as
the relation type specified in Template PAX files.
- setModelTypeSelection(TirePropertyCdBuilder.ModelType) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setModelViewCreation(PreviewPropertiesBuilder.ModelViewCreationOptions) - Method in interface nxopen.PreviewPropertiesBuilder
-
License requirements: None.
- setModelViewName(String) - Method in interface nxopen.annotations.SearchModelViewBuilder
-
License requirements: None.
- setModelViewToUse(AssemblyDrawingBuilder.ModelViewToUseValue) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setModeModalMass(int, double, double) - Method in interface nxopen.cae.ModeSet
-
Modify the modal mass of a mode.
- setModeNumber(int) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setModeNumber(int) - Method in interface nxopen.cae.optimization.DAOObjective
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setModeNumber(int) - Method in interface nxopen.cae.optimization.TBSEigenvalueOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setModeRequest(GraphBuilder.RequestChoices) - Method in interface nxopen.motion.GraphBuilder
-
- setModesCanBeRenumbered(boolean) - Method in interface nxopen.cae.ModeSetBuilder
-
Allow the modes to be renumbered in case there are modes with the same index in the modeset
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setModeSelection(DurSpecialistEvent.UpdateCriterionType) - Method in interface nxopen.cae.DurSpecialistBlockLoadEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setModeSelection(PocketBuilder.ModeType) - Method in interface nxopen.tooling.PocketBuilder
-
License requirements: None.
- setModeShapes(double) - Method in interface nxopen.cae.ModelUpdateOverallWeightsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setModeShapeTargetActive(int, boolean) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets active status for a specific mode shape target
License requirements: nx_correl_update ("FE Model Update")
.
- setModeShapeTargetWeight(int, double) - Method in interface nxopen.cae.ModelUpdateSolution
-
Sets weight for a specific mode shape target
License requirements: nx_correl_update ("FE Model Update")
.
- setModeStatus(int, boolean) - Method in interface nxopen.cae.ModeSet
-
Modify the status of a mode.
- setModeToggle(boolean) - Method in interface nxopen.display.TrueStudioBuilder
-
License requirements: None.
- setModeType(PackagingInterferenceBuilder.Mode) - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
- setModeUndampedFrequency(int, double) - Method in interface nxopen.cae.ModeSet
-
Modify the undamped frequency of a mode.
- setModifiable(boolean) - Method in interface nxopen.shipdesign.NavigatorNode
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setModifiableGeometryOption(PartModuleInputBuilder.ModifiableGeometryOptions) - Method in interface nxopen.geometricutilities.PartModuleInputBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setModificationPercent(int) - Method in interface nxopen.features.RefitFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setModificationPercentage(int) - Method in interface nxopen.features.PoleSmoothingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setModificationPercentage(int) - Method in interface nxopen.features.SmoothSplineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setModified(boolean) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setModified(boolean) - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setModifiedSketch(Sketch) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setModifiedSketch(Sketch) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setModifiedSketch(Sketch) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setModifyInputSheet(boolean) - Method in interface nxopen.die.CompensateRoughDataBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setModifyInputSheet(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setModifyMethod(GlobalShapingBuilder.ModifyMethodType) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: None.
- setModifyPercent(int) - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setModlData(Tag, int, UFGdt.ModlData[]) - Method in interface nxopen.uf.UFGdt
-
- setMoldbaseStyle(MotionSimulationBuilder.MoldbaseStyleType) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: None.
- setMoldFacePlane(Plane) - Method in interface nxopen.features.shipdesign.DeckBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setMoldFacePlane(Plane) - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setMoldOpenAngle(double) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMomentColor(NXColor) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
Moment Color
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setMomentVectorDisplay(FreeBodyResultsBuilder.VectorDisplay) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
Moment vector display
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setMonochromeBackgroundColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the monochrome background color
License requirements: None.
- setMonochromeDisplay(boolean) - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setMonochromeDisplay(boolean) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the monochrome display flag.
- setMonochromeForegroundColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the monochrome foreground color.
- setMonochromePreselectionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the monochrome color for preselected objects
License requirements: None.
- setMonochromeSelectionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the monochrome selection_color.
- setMonth(DateItemBuilder.MonthOfYear) - Method in interface nxopen.DateItemBuilder
-
License requirements: None.
- setMoreDetails(String[]) - Method in interface nxopen.die.DrawBeadBuilder
-
Set the detailed description strings of the draw bead.
- setMoreSummaryDetails(boolean) - Method in interface nxopen.VRMLImporter
-
Sets the More Summary Details flag.
- setMorphingFlag(boolean) - Method in interface nxopen.cae.FemCreationOptions
-
Set the morphing enabled flag
License requirements: None.
- setMotion(TireEnvelopeBuilder.MotionMethod) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setMotionCurve(double[]) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Set the motion curve values if type is set to from file.
- setMotionDistance(double) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMotionEnd(LaserLinearMove.MotionEnds) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setMotionEndType(CircularAboutAxisMoveBuilder.EndType) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
License requirements: None.
- setMotionMethod(ToolPathEditorBuilder.MotionMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setMotionName(String) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMotionObjects(NXObject[]) - Method in interface nxopen.motion.GraphBuilder
-
- setMotionOrigin(Point) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setMotionOutput(Cycle.MotionOutputTypes) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setMotionOutput(TurningOperationBuilder.MotionOutputOptions) - Method in interface nxopen.cam.TurningOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMotionProfile(MotionProfile) - Method in interface nxopen.mechatronics.CamBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMotionProfile(MotionProfile) - Method in interface nxopen.mechatronics.GraphControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMotionShape(CamPathContactMotionShapeType) - Method in interface nxopen.cam.PathContactMotion
-
License requirements: cam_base ("CAM BASE")
.
- setMotionSimFile(Part) - Method in interface nxopen.cae.SimMotionLoadsBuilder
-
Sets the motion simulation part file
License requirements: None.
- setMotionToTwoDimensions(Plane) - Method in interface nxopen.geometricutilities.ModlMotion
-
Set motion to two dimensions along the given plane
License requirements: None.
- setMotionType(AcrossVoids.MotionTypes) - Method in interface nxopen.cam.AcrossVoids
-
License requirements: None.
- setMotionType(MoveBuilder.Motion) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: None.
- setMotionType(InspectionOperationTransformBuilder.Motion) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMotionType(MoveBuilder.Motion) - Method in interface nxopen.cam.MoveBuilder
-
License requirements: None.
- setMotionType(OperationTransformBuilder.Motion) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMotionType(CamPathMotionType) - Method in interface nxopen.cam.PathLinearMotion
-
License requirements: cam_base ("CAM BASE")
.
- setMotionType(TransportSurfaceBuilder.MoveType) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMotionType(UserDefinedMotionBuilder.MotionTypes) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMotionVector(Direction) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setMotor(PMDCMotor) - Method in interface nxopen.motion.DriverOperation
-
License requirements: mechanisms ("MECHANISMS")
.
- setMotorType(PMDCMotorBuilder.Type) - Method in interface nxopen.motion.PMDCMotorBuilder
-
Sets the motor type
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setMountingInterfaceType(MountingInterfaceBuilder.InterfaceType) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setMountingMethod(StiffenerSystemBuilder.MountingMethods) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setMountingMethod(StiffenerBuilder.MountingMethods) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setMountingMethod(StiffenerSystemBuilder.MountingMethods) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setMountingMethod(StiffenerSystemBuilder.MountingMethods) - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setMountingPosition(BoundaryTurnBlank.Position) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setMountingType(DDAMExcitation.MountingType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setMountType(RobotMountMove.Types) - Method in interface nxopen.cam.RobotMountMove
-
License requirements: cam_base ("CAM BASE")
.
- setMouseGestureType(SelPref.MouseGesture) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setMovable(boolean) - Method in interface nxopen.annotations.DatumTargetBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setMove(boolean) - Method in interface nxopen.motion.MarkerToNodeData
-
License requirements: mechanisms ("MECHANISMS")
.
- setMoveAllGates(boolean) - Method in interface nxopen.tooling.MoldFillingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setMoveAttachedFlag(boolean) - Method in interface nxopen.routing.EditBendAngleBuilder
-
Move all attached geometry as a rigid set.
- setMoveContent(DrawingRegionBuilder.ContentToMove) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setMoveCopyInstance(InspectionOperationTransformBuilder.Result) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMoveCopyInstance(OperationTransformBuilder.Result) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMoveDirection(FollowPartMoveBuilder.MoveDirectionTypes) - Method in interface nxopen.cam.FollowPartMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMoveDistance(double) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMoveDistance(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMoveDumbGeometry(boolean) - Method in interface nxopen.positioning.ComponentPositioner
-
Sets the flag that enables the positioner to reposition dumb geometry.
- setMoveEnd(VectorDistanceMoveBuilder.EndType) - Method in interface nxopen.cam.VectorDistanceMoveBuilder
-
License requirements: None.
- setMoveHandle(boolean) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMoveMeasurementPoints(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMovementArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMovementArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMovementDirection(EdgeSymmetryBuilder.MovementDirections) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMovementMethod(EdgeSymmetryBuilder.MovementMethods) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMovementMethod(PolylineBuilder.MovementMethodType) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setMovementMethod(StudioSplineBuilderEx.MovementMethodType) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMovementMethod(StudioXformBuilderEx.MovementMethodType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMovementMethod(TransformCageData.MovementMethodType) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setMovementMethod(CurveShapingBuilder.MovementMethodType) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMovementPlane(Plane) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setMovementPlane(Plane) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMovementPlane(Plane) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setMovementPlane(Plane) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMovementVector(Direction) - Method in interface nxopen.features.PoleSmoothingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMovementVector(Direction) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setMovementVector(Direction) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMovementVector(Direction) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setMovementVector(Direction) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setMoveMethod(MovePoleBuilder.MoveMethodType) - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
License requirements: None.
- setMoveObjectResult(MoveObjectBuilder.MoveObjectResultOptions) - Method in interface nxopen.features.MoveObjectBuilder
-
License requirements: None.
- setMoveObjectsState(boolean) - Method in interface nxopen.positioning.Network
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setMoveOnCommit(Matrix3x3, Vector3d) - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Set the final motion from the drop location.
- setMoveOnCommit(Matrix3x3, Vector3d) - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder
-
Set the final motion from the drop location.
- setMoveOnlySelectedPoles(boolean) - Method in interface nxopen.features.PoleSmoothingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setMoveOption(AdmMoveFaceBuilder.MoveOptionType) - Method in interface nxopen.features.AdmMoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setMoveOptions(MoldFillingBuilder.MoveOption) - Method in interface nxopen.tooling.MoldFillingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setMoveOrCopyOption(TransformPathBuilder.TransformOption) - Method in interface nxopen.routing.TransformPathBuilder
-
Sets the operation to perform during the commit method.
- setMoveParents(boolean) - Method in interface nxopen.features.MoveObjectBuilder
-
License requirements: None.
- setMoveSharpEdge(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMoveStartPoint(boolean) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setMoveType(InspectionCmmCommandBuilder.MoveTypes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setMoveType(LaserLinearMove.MoveTypes) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setMoveType(NormalToToolAxisMoveBuilder.Orientation) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
License requirements: None.
- setMoveType(TeachmodeLinearMoveBuilder.MoveTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMoveType(TurnThreadEngageRetractBuilder.MoveTypes) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMoveWithExtensionSegments(boolean) - Method in interface nxopen.routing.TransformPathBuilder
-
Sets a message stating whether or not to move the selected segments with extension segments.
- setMovingDirection(Direction) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setMovingFace(Face) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setMovingGroup(NXObject[]) - Method in interface nxopen.positioning.Network
-
Set the elements of the moving_group.
- setMrshape(SimulationOptionsBuilder.ToolShapeMR) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMsetCsysMatrixOrigin(Matrix3x3, Point3d) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Sets csys matrix and origin.
- setMsetCsysOriginToFaceCenter() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Sets MSET CSYS origin to center of the selected faces.
- setMsetPart(TaggedObject) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setMsType(PackagingMeasureBuilder.MeasureType) - Method in interface nxopen.motion.PackagingMeasureBuilder
-
- setMtdUnits(UFVariant, UFSim.UnitType) - Method in interface nxopen.uf.UFSim
-
- setMtype(MeasureDistanceBuilder.MeasureType) - Method in interface nxopen.MeasureDistanceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setMultiCADAssembly(boolean) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setMultiChannelTurningLeadDistance(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMultiChannelTurningMode(RoughFinishTurningBuilder.MultiChannelTurningModeTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMultiChannelTurningSecondTool(Tool) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: None.
- setMultiComponent() - Method in interface nxopen.ScCollector
-
Sets the true option on ScCollector for collection from multiple components.
- setMultiComponent() - Method in interface nxopen.Section
-
Sets the true option on Section for collection from multiple components.
- setMultilineString(String[]) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
Sets the multiple notes for the given Text Type
License requirements: drafting ("DRAFTING")
.
- setMultilineStringComments(String[]) - Method in interface nxopen.features.shipdesign.PenetrationReviewRequestBuilder
-
Sets the multiline string comments
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setMultiple(CGMBuilder.MultipleOption) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setMultipleCenterMarks(boolean) - Method in interface nxopen.annotations.BaseCenterMarkBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setMultipleComponents(boolean) - Method in interface nxopen.tooling.CopySolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setMultipleEdit(boolean) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setMultipleFaceCollector(ScCollector) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setMultipleFeatures(boolean) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setMultipleMatches(SimBcXyPlotBuilder.ResolveMultipleMatches) - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMultipleStringValue(String[]) - Method in interface nxopen.annotations.PmiAttributeValueMultipleStringBuilder
-
Sets the multiple string
License requirements: None.
- setMultiplier(double) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setMultiPort(NXObject) - Method in interface nxopen.routing.ModelTerminalsBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setMultiPositionBuilder(TaggedObject) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setMultiToolDescription(String) - Method in interface nxopen.cam.MultiToolBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setMValue(int) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setMwLayoutType(LayoutBuilder.LayoutType) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.ame.BasicPropertiesBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.CabinetDesignBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.EditAnnotationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.ExtractAttributeBaseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.ImportEplanPageMacroBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.ame.QueryBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.SaveToLibraryBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.SubnetBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.ame.TiaProjectItemBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setName(String) - Method in interface nxopen.assemblies.productinterface.PropertyBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setName(String) - Method in interface nxopen.cae.aerostructures.LoadCaseSetBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setName(String) - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setName(String) - Method in interface nxopen.cae.aerostructures.MarginSolutionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setName(String) - Method in interface nxopen.cae.AlternateFemRepresentationSourceBuilder
-
Sets the name of the FemDataSet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setName(String) - Method in interface nxopen.cae.CaeGroup
-
CaeGroups the name of the group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setName(String) - Method in interface nxopen.cae.CfdAutoRefinementConstraint
-
Sets the name of the automatic refinement constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setName(String) - Method in interface nxopen.cae.CfdContactPreventionConstraint
-
Sets the name of the contact prevention constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setName(String) - Method in interface nxopen.cae.CfdLocalResolutionConstraint
-
Sets the name of the local resolution constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setName(String) - Method in interface nxopen.cae.CompanionResult
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setName(String) - Method in interface nxopen.cae.CompanionResultBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setName(String) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setName(String) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setName(String) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setName(String) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setName(String) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setName(String) - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setName(String) - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setName(String) - Method in interface nxopen.cae.DurSpecialistAnalysisTypeBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setName(String) - Method in interface nxopen.cae.DurSpecialistLoadProviderBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setName(String) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setName(String) - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setName(String) - Method in interface nxopen.cae.FluidDomainRecipe
-
Sets the name of the fluid domain recipe
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setName(String) - Method in interface nxopen.cae.FunctionBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.cae.LaminateDynamicSimBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setName(String) - Method in interface nxopen.cae.LaminateGlobalLayup
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setName(String) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setName(String) - Method in interface nxopen.cae.LaminateLayupOffset
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setName(String) - Method in interface nxopen.cae.LaminateMatOrientation
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setName(String) - Method in interface nxopen.cae.LaminatePlyGroup
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setName(String) - Method in interface nxopen.cae.LaminatePostReport
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setName(String) - Method in interface nxopen.cae.LaminatePostReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setName(String) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setName(String) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setName(String) - Method in interface nxopen.cae.LayoutState
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setName(String) - Method in interface nxopen.cae.LayoutStateBuilder
-
Sets the name of the layout state
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setName(String) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setName(String) - Method in interface nxopen.cae.optimization.DAOSolution
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setName(String) - Method in interface nxopen.cae.optimization.DAOSolutionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setName(String) - Method in interface nxopen.cae.optimization.NameDescription
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setName(String) - Method in interface nxopen.cae.PostAnnotation
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setName(String) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the annotation name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setName(String) - Method in interface nxopen.cae.PreTestExciterConfig
-
- setName(String) - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setName(String) - Method in interface nxopen.cae.PreTestSensorConfig
-
License requirements: nx_correl_base ("FE Correlation")
.
- setName(String) - Method in interface nxopen.cae.PreTestSensorConfigBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setName(String) - Method in interface nxopen.cae.PreTestSolution
-
License requirements: nx_correl_base ("FE Correlation")
.
- setName(String) - Method in interface nxopen.cae.PreTestSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setName(String) - Method in interface nxopen.cae.PrimitiveMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setName(String) - Method in interface nxopen.cae.responsesimulation.ObjectLabel
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setName(String) - Method in interface nxopen.cae.SelectionRecipe
-
Sets the name of the Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setName(String) - Method in interface nxopen.cae.SimCondition
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setName(String) - Method in interface nxopen.cae.SimConstraintSetBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.cae.SimLoadRecipe
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setName(String) - Method in interface nxopen.cam.CAMFeature
-
License requirements: cam_base ("CAM BASE")
.
- setName(String) - Method in interface nxopen.cam.FeatureGeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setName(String) - Method in interface nxopen.cam.GeneralPropertiesBuilder
-
License requirements: None.
- setName(String, boolean) - Method in interface nxopen.cam.GeometrySet
-
Set name
License requirements: cam_base ("CAM BASE")
.
- setName(String) - Method in interface nxopen.cam.HoldingSystemBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setName(String) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionPatternFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setName(String) - Method in interface nxopen.cam.ManualFeatureBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.CoordinateSystem
-
License requirements: None.
- setName(String) - Method in interface nxopen.CustomWidth
-
License requirements: None.
- setName(String) - Method in interface nxopen.display.DynamicSectionBuilder
-
Sets the section name.
- setName(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setName(String) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setName(String) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setName(String) - Method in interface nxopen.features.CustomAttribute
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setName(String) - Method in interface nxopen.features.DeformDefinitionBuilder
-
Sets name for deform definition feature.
- setName(String) - Method in interface nxopen.features.HumanBuilder
-
Sets human name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setName(String) - Method in interface nxopen.features.PartModuleBuilder
-
- setName(String) - Method in interface nxopen.features.shipdesign.AnchorPoint
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setName(SteelDistributionBuilder.SaName) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setName(String) - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setName(String) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setName(String) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setName(String) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setName(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setName(String) - Method in interface nxopen.INXObject
-
Sets the custom name of the object.
- setName(String) - Method in interface nxopen.layout2d.ComponentNameBuilder
-
License requirements: drafting ("DRAFTING")
.
- setName(String) - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setName(String) - Method in interface nxopen.linedesigner.CreateFactoryElementBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setName(String) - Method in interface nxopen.linedesigner.RenameDialogeBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.ChainJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.CollisionMaterialBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.DisplayChangerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.DynamicObjectTableBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.ExpressionBlockBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.ExternalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.ObjectSinkBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.ObjectSourceBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.PhysicsConstraintBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(NXObject, String) - Method in interface nxopen.mechatronics.PhysicsManager
-
Physics to rename
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.SignalAdapterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.SignalBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.SymbolTableBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.TagFormBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.TagTableBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.TracerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setName(String) - Method in interface nxopen.mfg.am.Profile
-
Set the name of the Profile
License requirements: None.
- setName(String) - Method in interface nxopen.mfg.am.ProfileLibrary
-
Set the name of the Profile Library
License requirements: None.
- setName(String) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.BaseSectionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.BeamForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.BodyContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.ControlInputBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.ControlInputPortBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.ControlOutputBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.CouplerBuilder
-
Sets the name
License requirements: None.
- setName(String) - Method in interface nxopen.motion.CurveOnCurveBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.DamperBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.GeneralCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.JointDefine
-
Sets the joint name
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.JointDriverBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.LinkBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.LinkCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.LinkDriverBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.MarkerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.MotionSensorBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String, boolean) - Method in interface nxopen.motion.MotionSolution
-
Set name
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.PackagingBuilder
-
- setName(String) - Method in interface nxopen.motion.PlantInputBuilder
-
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- setName(String) - Method in interface nxopen.motion.PlantOutputBuilder
-
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- setName(String) - Method in interface nxopen.motion.PMDCMotorBuilder
-
Sets the name
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setName(String) - Method in interface nxopen.motion.PointOnCurveBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.PointOnSurfaceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.PortAssociation
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.ScalarForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.SegmentBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.SignalChartBuilder
-
Sets the name
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setName(String) - Method in interface nxopen.motion.SplineBeamBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.SplineBeamPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.SubmechanismPositionerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.TireBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.TirePropertyBasicParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.TirePropertyFtBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setName(String) - Method in interface nxopen.NavigatorFilter
-
- setName(String) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.PhysicalMaterialBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.preferences.LoadDraftingStandardBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.report.CommandBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.routing.electrical.ElectricalFormat
-
Sets the name of
ElectricalFormat
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX5.0.1
- setName(String) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setName(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setName(String) - Method in interface nxopen.sim.KinematicChannelBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setName(String) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- setName(String) - Method in interface nxopen.sim.KinematicConfigurator
-
Sets the custom name of the kinematic model
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- setName(String) - Method in interface nxopen.sim.KinematicJunctionBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- setName(String) - Method in interface nxopen.sim.MachineKitBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setName(String) - Method in interface nxopen.tooldesigner.CloneUnitDesignBuilder
-
License requirements: None.
- setName(Tag, String) - Method in interface nxopen.uf.UFObj
-
- setName(String) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setName(String) - Method in interface nxopen.validate.ResultObject
-
- setName1(String) - Method in interface nxopen.features.PartModuleBuilder
-
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- setNameAttribute(String) - Method in interface nxopen.cae.AttributeSelectionRecipe
-
Sets or adds the name attribute.
- setNameCollisionsBehavior(SimConditionSeqMgr.ImportNameCollisionsBehavior) - Method in interface nxopen.cae.SimConditionSeqMgr
-
Sets the name collision behavior during a file import.
- setNameCSYS(String) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setNameDisplay(boolean) - Method in interface nxopen.uf.UFMotion
-
- setNameDisplayed(boolean) - Method in interface nxopen.cae.SelectionRecipeDisplay
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNameDisplayFlag(boolean) - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Sets the true/false flag based on whether the name of the DOF Set is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNameDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the name of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNameDisplayStatus(int) - Method in interface nxopen.uf.UFDisp
-
- setNamedPropertyTableArrayPropertyValue(String, NamedPropertyTable[]) - Method in interface nxopen.cae.PropertyTable
-
Sets the referenced object array value of the property
License requirements: None.
- setNamedPropertyTablePropertyValue(String, NamedPropertyTable) - Method in interface nxopen.cae.PropertyTable
-
Sets the referenced named property table object value of the property
License requirements: None.
- setNamedRange(String, int, int, int, int, int) - Method in interface nxopen.Spreadsheet
-
Defines a name for the Range of cells.
- setNamedReferenceType(String) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setNamedReferenceType(String) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setNameFilter(String) - Method in interface nxopen.routing.StockBrowserBuilder
-
Sets the stock name filter which defines filter to name stock
License requirements: routing_base ("Routing Basic")
.
- setNameInFunction(String) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNameInLocation(String) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNameInProduct(String) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNameLocation(Point3d) - Method in interface nxopen.DisplayableObject
-
Sets the location of the object's name.
- setNameLocation(Point3d) - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
Sets the name location.
- setNameLocation(Point3d) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Sets the name location.
- setNameLocationSpecified(boolean) - Method in interface nxopen.FeatureGeneralPropertiesBuilder
-
License requirements: None.
- setNameLocationSpecified(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setNameOrigin(Tag, double[]) - Method in interface nxopen.uf.UFObj
-
- setNameOverride(boolean) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setNamePrefix(String) - Method in interface nxopen.weld.SurfaceWeldBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setNamePrefix(String) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setNameRule(String) - Method in interface nxopen.tooling.CloneObject
-
Sets the name rule.
- setNameRule(String) - Method in interface nxopen.tooling.EjectorTableBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setNameRule(String) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setNameRule(UFClone.NameRuleDef, UFClone.NamingFailures) - Method in interface nxopen.uf.UFClone
-
- setNameSeed(String) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setNameSource(String, EngineeringObjectAspectDetailBuilder.NameSource) - Method in interface nxopen.ame.EngineeringObjectAspectDetailBuilder
-
Sets the source for aspect name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNamespaces(String[]) - Method in interface nxopen.report.CommandBuilder
-
Sets the categories which command apply to.
- setNameString(String) - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setNameString(String) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setNameString(String) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setNameString(String) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setNameString(String) - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setNameSuffix(String) - Method in interface nxopen.tooling.SetPressModelBuilder
-
License requirements: nx_dievalidation ("DIE VALIDATION")
.
- setNameToFrom(boolean) - Method in interface nxopen.routing.SplitRunBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setNameUserSpecified(boolean) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setNameViewStatus(int) - Method in interface nxopen.uf.UFDisp
-
- setNaming(String, UFClone.NamingTechnique, String) - Method in interface nxopen.uf.UFClone
-
- setNamingRule(InterpartExpressionsBuilder.NamingRules) - Method in interface nxopen.InterpartExpressionsBuilder
-
License requirements: None.
- setNarrowArrowType(ArrowheadType) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNarrowDimensionData(Tag, UFDrf.NarrowDimensionInfo) - Method in interface nxopen.uf.UFDrf
-
- setNarrowDimensionPreferences(NarrowDimensionData) - Method in interface nxopen.annotations.Dimension
-
Sets the narrow dimension preferences to the given linear dimension.
- setNarrowDimensionPreferences(NarrowDimensionPreferences) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the narrow dimension preferences
License requirements: None.
- setNarrowDimensionTextOffset(double) - Method in interface nxopen.annotations.Dimension
-
Sets the narrow dimension text offset for the given chain dimension.
- setNarrowDisplayType(NarrowDisplayOption) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNarrowLeaderAngle(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNarrowTextOffset(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNarrowTextOrientation(NarrowTextOrientation) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNastranBasic(boolean) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- setNastranBasicCsys(boolean) - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setNativeFileBrowser(String) - Method in interface nxopen.cae.CorrelApplyAlignmentFromBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNativeFileBrowser(String) - Method in interface nxopen.cae.PreTestExportUnvBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNativeFileBrowser(String) - Method in interface nxopen.display.StudioImageCaptureBuilder
-
License requirements: None.
- setNativeFileBrowser(String) - Method in interface nxopen.features.BodyByEquationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNativeFileBrowser(String) - Method in interface nxopen.features.MathIntegrationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNativeFileBrowser(String) - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setNativeFileBrowser(String) - Method in interface nxopen.mechatronics.GanttExportPLCopenBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setNativeFileUnits(PreTestExportUnvBuilder.FileUnitsOption) - Method in interface nxopen.cae.PreTestExportUnvBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNativeFolderBrowser(String) - Method in interface nxopen.ame.GenerateReportsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNativeImageFileBrowser(String) - Method in interface nxopen.display.SaveImageFileBrowserBuilder
-
License requirements: None.
- setNativeItem(int) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setNativeRfiFileName(String) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setNativeToggle(boolean) - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setNaturalFrequenciesChoice(LaminateSineEventBuilder.NaturalFrequeciesEnum) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setNaturalFrequenciesEnable(boolean) - Method in interface nxopen.cae.LaminateSineEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setNavCriteria(AncestorEvaluatorBuilder.JaAspectEvaluatorBuilderNavCriteria) - Method in interface nxopen.ame.AncestorEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNavDirection(AncestorEvaluatorBuilder.JaAspectEvaluatorBuilderNavDirection) - Method in interface nxopen.ame.AncestorEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNavigateViolationLocationOption(boolean) - Method in interface nxopen.routing.DesignRuleViolationViewer
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setNavigationSensitivity(DialogItem.DialogItemIndex, boolean) - Method in interface nxopen.uistyler.DialogItem
-
Specifies the sensitivity of the navigation buttons at the bottom of the dialog.
- setNavigatorObjectSelectedPlugin(CustomManager.NavigatorObjectSelectedPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will call whenever an object on the Component or
Connection Navigator is selected or deselected.
- setNavigatorRootComponent(NXObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Set the root component of the navigator
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setNbpoints(int) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: None.
- setNbpoints(int) - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
License requirements: None.
- setNbScanPoints(int) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNearestPointOption(boolean) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setNeckChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNeckChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.StartHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNeedChangeDisplayPartBack(boolean) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNeedFirstClearance(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNeedleDirection(SectionAnalysisBuilder.NeedleDirectionType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNeedleDirection(SectionAnalysisExBuilder.NeedleDirectionType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNeedleDirection(SurfaceIntersectionBuilder.DirectionTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNeedlePlotDisplayed(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNeedleScale(double) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNeedleScale(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNeedSecondClearance(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNeedThirdClearance(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNegateFrame(int) - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setNegateOffsetsFlag(boolean) - Method in interface nxopen.routing.Stock
-
Sets the negate offsets flag of this
Stock
.
- setNegation(OperatorRuleBuilder.NegationValue) - Method in interface nxopen.ame.OperatorRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNegativeFaceColor(int) - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNegativeFaceColor(int) - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNegativeFlushnessTolerance(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNegativeGapTolerance(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNegativeInnerTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNegativeOuterTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNegativeToleranceLabelDisplayed(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNeighboringFactor(double) - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setNeighborsEnabled(boolean) - Method in interface nxopen.features.ChangeShellThicknessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setNestedAssyParentComp(Tag, Tag) - Method in interface nxopen.uf.UFPlist
-
- setNetlistRoundingMethod(LayoutLengthOptions.RoundingMethod) - Method in interface nxopen.formboard.LayoutLengthOptions
-
License requirements: routing_harness ("Routing Harness")
.
- setNetworkArrangementsMode(ComponentNetwork.ArrangementsMode) - Method in interface nxopen.positioning.ComponentNetwork
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setNetworkSolveInWorksetMode(boolean) - Method in interface nxopen.positioning.ComponentNetwork
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setNeutralAxisPercent(double) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setNeutralFactor(String) - Method in interface nxopen.features.sheetmetal.BendOptions
-
- setNeutralFactor(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the bend relief depth value
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setNeutralFactor(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
THE bend relief depth value
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setNeutralFactor(String) - Method in interface nxopen.tooling.DefineNeutralFactorBuilder
-
License requirements: None.
- setNeutralFactor(String) - Method in interface nxopen.tooling.PrebendBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNeutralFactorFormula(DefineNeutralFactorBuilder.FormulaOptions) - Method in interface nxopen.tooling.DefineNeutralFactorBuilder
-
License requirements: None.
- setNeutralMethod(InverseBendingLinesBuilder.NeutralMethodType) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setNeutralName(String) - Method in interface nxopen.cae.ElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNeutralName(String) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNeutralName(String) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNeutralName(String) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNeutralName(String) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNeutralName(String) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNeutralName(String) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNeutralName(String) - Method in interface nxopen.cae.SpiderElementBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNeutralOffset(String) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setNewAngle(double) - Method in interface nxopen.features.EmbossSidewall
-
Set a new taper angle
License requirements: None.
- setNewChangeoverName(String) - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
License requirements: None.
- setNewColor(int) - Method in interface nxopen.DisplayModification
-
Sets a new color for objects which will be modified.
- setNewComponentName(String) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setNewDieBaseName(String) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setNewFaceProperties(SessionModeling.NewFacePropertiesInheritance) - Method in interface nxopen.preferences.SessionModeling
-
Sets the new face properties inheritance.
- setNewFile(FileNew) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setNewFile(String) - Method in interface nxopen.cae.ConvertToConvergentBodyBuilder
-
License requirements: None.
- setNewFileName(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setNewFont(DisplayableObject.ObjectFont) - Method in interface nxopen.DisplayModification
-
Sets a new font (line style) for objects which will be modified
License requirements: None.
- setNewGrid(int, int) - Method in interface nxopen.DisplayModification
-
Set a new grid count for objects which will be modified.
- setNewItemId(String) - Method in interface nxopen.tooling.ClonePart
-
License requirements: None.
- setNewItemType(String) - Method in interface nxopen.tooling.ClonePart
-
License requirements: None.
- setNewLayer(int) - Method in interface nxopen.DisplayModification
-
Sets a new layer for objects which will be modified.
- setNewMeshOption(ElementCreateBuilder.NewMeshType) - Method in interface nxopen.cae.ElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNewMeshOption(boolean) - Method in interface nxopen.cae.ElementDetachBuilder
-
License requirements: None.
- setNewMeshOption(ElementExtrudeBuilder.NewMeshType) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNewMeshOption(ElementProjectBuilder.NewMeshType) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNewMeshOption(ElementReflectBuilder.NewMeshType) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNewMeshOption(ElementRevolveBuilder.NewMeshType) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNewMeshOption(ElementRotateBuilder.NewMeshType) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNewMeshOption(ElementTranslateBuilder.NewMeshType) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNewMeshOption(SpiderElementBuilder.NewMeshType) - Method in interface nxopen.cae.SpiderElementBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNewMfkId(String) - Method in interface nxopen.tooling.ClonePart
-
License requirements: None.
- setNewMirrorPlane(Plane) - Method in interface nxopen.features.MirrorFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setNewNameFile(String) - Method in interface nxopen.features.EmbedManagerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNewNameRule(RenameAndExportComponentBuilder.NamingRuleType) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNewParameterDataType(NXObject, String) - Method in interface nxopen.ame.PlcMethodBuilder
-
Set new data type to a parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNewParameterName(NXObject, String) - Method in interface nxopen.ame.PlcMethodBuilder
-
Set new name to a parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNewParents(DisplayableObject[]) - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Set the source entities for the Replacement Assistant.
- setNewPart(Part) - Method in interface nxopen.LinkedMirrorPartBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNewPartName(String) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNewPartName(String) - Method in interface nxopen.tooling.ClonePart
-
License requirements: None.
- setNewPartNames(String) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: None.
- setNewPartNames(String) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: None.
- setNewPartNames(String) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNewPartNames(String) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: None.
- setNewPlane(Plane) - Method in interface nxopen.features.MirrorCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNewPlane(boolean) - Method in interface nxopen.features.SectionEditBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNewPlane(Plane) - Method in interface nxopen.geometricutilities.MirrorPattern
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setNewPoint(Point) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setNewRevisionId(String) - Method in interface nxopen.tooling.ClonePart
-
License requirements: None.
- setNewSensors(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNewStringInName(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNewSurfaceLayer(int) - Method in interface nxopen.tooling.DesignTrimToolBuilder
-
License requirements: None.
- setNewSymmetryPlane(Plane) - Method in interface nxopen.features.SymmetricBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setNewTranslucency(int) - Method in interface nxopen.DisplayModification
-
Sets a new translucency value for objects which will be modified.
- setNewWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.DisplayModification
-
Sets a new line width for objects which will be modified
License requirements: None.
- setNewWindowSetting(Preference.NewWindowChoice) - Method in interface nxopen.cae.xyplot.Preference
-
License requirements: None.
- setNextBranchID(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setNextLinkedRegion(DrawingRegion) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Set the next linked regions
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setNextNumber(int) - Method in interface nxopen.tooling.CloneObject
-
Sets the next number of clone object.
- setNextPartNameNumber(int) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNfrName(String) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setNmCopy(String, UFClone.CopyNmOpt) - Method in interface nxopen.uf.UFClone
-
- setNmifThreshold(double) - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNoBackground(boolean) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setNocoreStock(double) - Method in interface nxopen.cam.WedmNocoreGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNodalAveraging(ResultProbeBuilder.NodalCombination) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNodalCombinationValue(PostGraphBuilder.NodalCombination) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setNodalcombinetype(ResultVariable.NodalCombination) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNodalComponent(VelocityImpactDirection.NodalComponentType) - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setNodalMapping(int) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setNoDataOption(PostGraphBuilder.DataErrorHandling) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setNoDataOption(ResultsCombinationBuilder.NoData) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
Set no data option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNoDataOption(ResultsEnvelopeBuilder.NoData) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
Set no data option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNoDataOption(ResultsReductionBuilder.NoData) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set no data option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNoDataOption(TransientResultsReductionBuilder.NoData) - Method in interface nxopen.cae.TransientResultsReductionBuilder
-
Set no data option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNode(FENode) - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNode(FENode) - Method in interface nxopen.cae.connections.NodeLocation
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNode(NXObject) - Method in interface nxopen.linedesigner.FactoryCadGeoEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setNode(Equipment, String) - Method in interface nxopen.pid.PortEquipmentBuilder
-
Set the node.
- setNodeCheckCallback(Navigator.NodeCheckCallback) - Method in interface nxopen.shipdesign.Navigator
-
Sets node check callback.
- setNodeColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodeConnectivity(boolean) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodeDeselectedCallback(Navigator.NodeDeselectedCallback) - Method in interface nxopen.shipdesign.Navigator
-
Sets node deselected callback.
- setNodeDisplayMode(ModelDisplayBuilder.NodeDisplayModeType) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodeElementOption(DurabilityStressAxesBuilder.NodeElementOptionEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setNodeId(int) - Method in interface nxopen.cae.PostSelectionEntity
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNodeId(int) - Method in interface nxopen.motion.MarkerToNodeData
-
License requirements: mechanisms ("MECHANISMS")
.
- setNodeId(String) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setNodeIdDisplayFlag(boolean) - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Sets the true/false flag based on whether the node id of the DOF Set is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNodeIdDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the node id of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNodeIDsOnFreeEdge(int[], int[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets the node IDs on the free edges (non-constrainted boundary edges).
- setNodeLabel(int) - Method in interface nxopen.cae.MeshPointBaseBuilder
-
License requirements: None.
- setNodeLocation(double[]) - Method in interface nxopen.motion.MarkerToNodeData
-
Sets the node locations
License requirements: mechanisms ("MECHANISMS")
.
- setNodeMapSizeLimit(int) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNodeMapSizeLimitActive(boolean) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNodeMarker(ModelDisplayBuilder.NodeMarkerType) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodeMatchingDistance(double) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNodeMergeOption(SolverAppendOption.MergeOption) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNodeMeshShowHideOption(ModelDisplayBuilder.NodeMeshShowHideOptionType) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodeName(NavigatorNode, String) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Set node name.
- setNodeName(String) - Method in interface nxopen.shipdesign.ShipNavigatorNodeBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setNodeObjects(TaggedObject[]) - Method in interface nxopen.shipdesign.NavigatorNode
-
Sets the objects represented by the node.
- setNodeOffset(int) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNodePosition(FENode, Point3d) - Method in interface nxopen.cae.NodesRepositionBuilder
-
Set the new absolute postion for the input node.
- setNodePositions(FENode[], Point3d[]) - Method in interface nxopen.cae.NodesRepositionBuilder
-
Set the new absolute postions for an array of input nodes.
- setNodes(FENode[]) - Method in interface nxopen.cae.connections.NodeSeriesLocation
-
Set location nodes.
- setNodes(int[]) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The interface nodes
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setNodes(int[]) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the node ids for which annotation is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setNodes(FENode[]) - Method in interface nxopen.cae.ResultMeasureModelSubsetFE
-
Set the nodes
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNodeSelectedCallback(Navigator.NodeSelectedCallback) - Method in interface nxopen.shipdesign.Navigator
-
Sets node selected callback.
- setNodeSelectInternal(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodeSelection(TaggedObject, FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the node selected for manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodesEnabled(boolean) - Method in interface nxopen.cae.PreTestDofSetBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNodeString(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setNodeToCurveEndPointMap(TaggedObject, FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the node-to-CurveEndPoint map for node-to-edge mapping type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodeTolerance(double) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodeTolerance(double) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNodeToVertexMap(TaggedObject, FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the node-to-vetex map for node-to-edge mapping type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodeType(ShipNavigatorNodeBuilder.NodeTypes) - Method in interface nxopen.shipdesign.ShipNavigatorNodeBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setNodeUnattachedMarker(ModelDisplayBuilder.NodeUnattachedMarkerType) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNodragValue(double) - Method in interface nxopen.cam.CycleNodragClearance
-
License requirements: cam_base ("CAM BASE")
.
- setNoEdit(boolean) - Method in interface nxopen.Expression
-
License requirements: None.
- setNoInteractionQueriesToggle(boolean) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
License requirements: None.
- setNomenclature(String[]) - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
Sets the nomenclature
License requirements: None.
- setNomenclature(String[]) - Method in interface nxopen.annotations.ProcessSpecificationBuilder
-
Sets the nomenclature
License requirements: None.
- setNominalDecimalPlaces(int) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the number of decimal places for the nominal value of a dimension.
- setNominalDepthPerCut(double) - Method in interface nxopen.cam.FeedsOptimizationData
-
License requirements: cam_base ("CAM BASE")
.
- setNominalDMS(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNominalFlushness(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNominalGap(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNominalLabelDisplayed(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNominalLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setNominalLeadAngleType(ToolAxisVariable.NominalLeadAngleTypes) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setNominalName(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNominalSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNominalStepover(double) - Method in interface nxopen.cam.FeedsOptimizationData
-
License requirements: cam_base ("CAM BASE")
.
- setNoModelDisplayOnPostviewCreation(boolean) - Method in interface nxopen.preferences.PostProcessing
-
Sets the flag which indicates that no finite element model data will displayed when postviews are created
License requirements: None.
- setNonAlignedMinimumBox(boolean) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setNonCliffEdges(ScCollector) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNonFeatureApplication(boolean) - Method in interface nxopen.geometricutilities.WaveLinkRepository
-
Specify if the client is non-feature based application or not.
- setNonFeatureEdgeSelection(UFGdt.EdgeSelectType) - Method in interface nxopen.uf.UFGdt
-
- setNonFeatureMode() - Method in interface nxopen.ScCollector
-
Sets the true option on ScCollector for collection in non-feature mode.
- setNonFeatureMode() - Method in interface nxopen.Section
-
Sets the true option on Section for collection in non-feature mode.
- setNonGeometric(boolean) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setNonGeometricState(Component, boolean) - Method in interface nxopen.assemblies.ComponentAssembly
-
Sets the component state to Geometric or Non-Geometric.
- setNonlinearityCoefficient(double) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setNonManifoldEdgeDisplayStyle(ElementEdgeCheckBuilder.EdgeDisplayStyle) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNonMasterSaveAsOption(LogicalObject, NonMasterData.CopyNonMasterPartsOption) - Method in interface nxopen.pdm.NonMasterData
-
Set the nonmasters saveAs option for given logical object.
- setNonmasterSaveAsOption(PartFromPartBuilder.FileSaveAs) - Method in interface nxopen.pdm.PartFromPartBuilder
-
Sets the non-master parts to save during the save as operation
Deprecated in NX10 for "Save As of master parts" operation.
- setNonMasterSaveAsOption(LogicalObject, PartOperationBuilder.NonMasterSaveAs) - Method in interface nxopen.pdm.PartOperationBuilder
-
- setNonmasterSeedPartData(String) - Method in interface nxopen.PartCollection
-
Set non master seed part data for opening unpopulated non master part
License requirements: None.
- setNonmasterToSaveAs(String, boolean) - Method in interface nxopen.pdm.PartFromPartBuilder
-
Sets whether or not the non-master part specified will actually
get saved during the save as operation.
- setNonMovingGroupGrounded(boolean) - Method in interface nxopen.positioning.Network
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setNonParametricSpline(Spline, StudioSplineBuilder.Method) - Method in interface nxopen.features.StudioSplineBuilder
-
- setNonSectionedHiddenColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedHiddenFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedHiddenWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedSecondaryHiddenColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedSecondaryHiddenFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedSecondaryHiddenWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedSecondaryVisibleColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedSecondaryVisibleFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedSecondaryVisibleWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedVisibleColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedVisibleFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonSectionedVisibleWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNonStandardPoints(Point3d[], boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Set the point coordinates
License requirements: None.
- setNonTiltLeadIn(NcmWedmBuilder.NonTiltLeadInTypes) - Method in interface nxopen.cam.NcmWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNonUniqueMembership(Tag) - Method in interface nxopen.uf.UFGroup
-
- setNoOfStairs(int) - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setNormal(Vector3d) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setNormal(Vector3d) - Method in interface nxopen.display.DynamicSectionBuilder
-
Sets the normal of the section plane
Section offset and rotation matrix are updated.
- setNormal(Vector3d) - Method in interface nxopen.IPlane
-
License requirements: None.
- setNormal1Reversed(boolean) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNormal2Reversed(boolean) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNormalBbpslug(PiercingInsertBuilder.NormalBbpslugType) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalBbpslug(SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setNormalBottomBackPlateSlug(DieCavityAndSlugHoleBuilder.BottomPlateSlugItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalCavity(DieCavityAndSlugHoleBuilder.CavityTypeItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalCavity(PiercingInsertBuilder.NormalCavityType) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalCavity(SpecialPiercingInsertBuilder.NormalCavityType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setNormalClearance(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalClearance(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalClearance(double) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalClearance(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setNormalClearanceOption(DieCavityAndSlugHoleBuilder.ClearanceOptionItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalClearanceOption(PiercingInsertBuilder.NormalClearanceOptionType) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalClearanceOption(PunchInsertBuilder.NormalClearanceOptionTypeItems) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalDieShoeSlug(DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalDir(DeckListItemBuilder.DatumDir) - Method in interface nxopen.features.shipdesign.DeckListItemBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setNormalDirection(Direction) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setNormalDirection(Direction) - Method in interface nxopen.drawings.OvtBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNormalDirection(Xform) - Method in interface nxopen.drawings.ProjectedViewOrientationBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNormalDirection(Direction) - Method in interface nxopen.drawings.SvtBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNormalDirectionFlipped(boolean) - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
License requirements: None.
- setNormalDirectionI(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalDirectionIndicator(int) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setNormalDirectionJ(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalDirectionK(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalDisplay(boolean) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setNormalDsslug(PiercingInsertBuilder.NormalDsslugType) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalDsslug(SpecialPiercingInsertBuilder.NormalDieShoeSlugType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setNormalForce(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalForEachScrap1(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalForEachScrap1(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalForEachScrap2(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalForEachScrap2(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalizeResults(boolean) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setNormalOffsetSide(DieCavityAndSlugHoleBuilder.OffsetSideOptionItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalOffsetSide(PiercingInsertBuilder.NormalOffsetSideType) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalOffsetSide(PunchInsertBuilder.NormalOffsetSideTypeItems) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalOffsetSide(SpecialPiercingInsertBuilder.NormalOffsetSideType) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setNormalOnePunchToggle(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalOnePunchToggle(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalOption(FaceCurvatureAnalysisBuilder.DirectionTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNormalOrientation(Matrix3x3) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNormalOrigin(Point3d) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNormalPunchLength(String) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalPunchLength(String) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalRenameDialog(boolean) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalRenameDialog(boolean) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalRenameDialog(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalRenameDialog(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalsColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNormalsColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNormalSlugInDiePlateThree(DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalSlugInDiePlateTwo(DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalSlugPara1(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalSlugPara1(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setNormalSlugPara2(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalSlugPara2(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setNormalSlugPara3(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalSlugPara3(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setNormalSlugPara4(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setNormalSlugPara4(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setNormalSlugParameter1(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalSlugParameter2(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalSlugParameter3(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalSlugParameter4(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNormalSurface(Face) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Sets the underlying normal surface
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalToEndSections(boolean) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Sets the normal to end sections for Through Curves surface.
- setNormalToEndSections(boolean) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setNormalToGridPlane(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setNormalVector(Direction) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVector(Direction) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setNormalVector(Direction) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setNormalVector(Direction) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNormalVectorI(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorI(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorI(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorI(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorI(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorJ(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorK(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorK(double) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorK(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorK(double) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorK(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNormalVectorValue(Vector3d) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setNormalWidth(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setNoseAngle(double) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNotchFactor(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setNote(String[]) - Method in interface nxopen.AttributeTemplatesBuilder
-
Sets the note.
- setNote(Note) - Method in interface nxopen.drafting.SpecifyRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setNoteCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setNoteLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setNoteOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setNoteRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setNoteRule(String) - Method in interface nxopen.drafting.RulesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setNoteText(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setNoteText(String) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNoteTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setNoteTexts(String[]) - Method in interface nxopen.cae.xyplot.MarkerStyleSetting
-
Sets the note texts
License requirements: None.
- setNoteTexts(String[]) - Method in interface nxopen.cae.xyplot.NoteStyleSetting
-
Sets the note texts
License requirements: None.
- setNoteTextVisibility(boolean) - Method in interface nxopen.cae.xyplot.MarkerStyleSetting
-
License requirements: None.
- setNoteTitle(String) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNotifyIfParentPointMoved(boolean) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setNotifyNodeSelectedPostHandler(Explorer.NotifyNodeSelectedPostCallback) - Method in interface nxopen.blockstyler.Explorer
-
Sets the NotifyNodeSelectedPost handler.
- setNotifyNodeSelectedPreHandler(Explorer.NotifyNodeSelectedPreCallback) - Method in interface nxopen.blockstyler.Explorer
-
Sets the NotifyNodeSelectedPre handler.
- setNotifyOnDelete(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the option " Notify on Delete " gives choice, whether the user wants a
notification message when a feature is being deleted will effect other features.
- setNoUpdate(boolean) - Method in interface nxopen.Expression
-
License requirements: None.
- setNozzleBottom(boolean) - Method in interface nxopen.diagramminglibraryauthor.PortDataBuilder
-
License requirements: None.
- setNozzleLeft(boolean) - Method in interface nxopen.diagramminglibraryauthor.PortDataBuilder
-
License requirements: None.
- setNozzleRight(boolean) - Method in interface nxopen.diagramminglibraryauthor.PortDataBuilder
-
License requirements: None.
- setNozzleTop(boolean) - Method in interface nxopen.diagramminglibraryauthor.PortDataBuilder
-
License requirements: None.
- setNSection(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNthColumn(int, double[]) - Method in interface nxopen.GeneralScalarTable
-
Sets the entire Nth column of values.
- setNthColumnUnits(int, Unit) - Method in interface nxopen.GeneralScalarTable
-
Sets the entire Nth column of values.
- setNthConnectorExpressionPropagationList(int, Expression) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
The Nth expressions from connectors propagated expressions are set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setNthMeanBin(int, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Sets the nth mean bin.
- setNthNominalRangeBin(int, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Sets the nth nominal range bin.
- setNthParameterDisplay(HoleCalloutSettingsBuilder.Featuretype, int, boolean) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
Sets the display status of the nth hole feature parameter of feature type.
- setNthParameterPrefix(HoleCalloutSettingsBuilder.Featuretype, int, String[]) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
If the prefix of the nth hole feature parameter of feature type can be edited, sets its prefix.
- setNthParameterSuffix(HoleCalloutSettingsBuilder.Featuretype, int, String[]) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
If the suffix of the nth hole feature parameter of feature type can be edited, sets its suffix.
- setNthParameterValue(HoleCalloutSettingsBuilder.Featuretype, int, String) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
Sets the parameter expression of the nth hole feature parameter of feature type.
- setNthRow(int, double[]) - Method in interface nxopen.GeneralScalarTable
-
Sets the entire Nth row of values.
- setNthSecondaryArrowheadOrientation(int, TextPlacement) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
The arrowhead orientation for nth secondary dimensions
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNthSecondaryArrowheadOrientation(int, TextPlacement) - Method in interface nxopen.annotations.RadialDimensionBuilder
-
The arrowhead orientation for nth secondary dimensions
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNthSecondaryOrigin(int, Point3d) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
The origin for nth secondary dimensions
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNthSecondaryOrigin(int, Point3d) - Method in interface nxopen.annotations.RadialDimensionBuilder
-
The origins for secondary dimensions
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNthVectorColors(int, NXColor) - Method in interface nxopen.cae.xyplot.VectorStyle2DSetting
-
Set the nth vector display color
License requirements: None.
- setNullBandTolerance(double) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
License requirements: None.
- setNullUserAttribute(Tag, String, int, boolean) - Method in interface nxopen.uf.UFAttr
-
- setNumAssociatedObjectsSets(int) - Method in interface nxopen.annotations.PmiData
-
Sets the number of associated objects list
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNumBends(DirectUnfoldBuilder.Bend) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setNumber(int) - Method in interface nxopen.cam.ReliefCut
-
License requirements: cam_base ("CAM BASE")
.
- setNumber(int) - Method in interface nxopen.cam.SpringPasses
-
License requirements: cam_base ("CAM BASE")
.
- setNumber(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setNumber(String) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNumber(int) - Method in interface nxopen.features.IFormBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNumber(int) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNumber(int) - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNumber(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNumber(int) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNumber(String) - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setNumber(int) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setNumber(int, int, SpreadsheetCellData, int) - Method in interface nxopen.Spreadsheet
-
Stores a numeric value in the specified cell of the worksheet.
- setNumberAllowedConnections(int) - Method in interface nxopen.diagramming.PortBuilder
-
License requirements: None.
- setNumberAtFirstDirection(int) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberAtSecondDirection(int) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberAttr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setNumberBends(PrebendBuilder.NumberBendsOption) - Method in interface nxopen.tooling.PrebendBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNumberCheckPoints(int) - Method in interface nxopen.geometricanalysis.DeviationChecking
-
License requirements: None.
- setNumberColumnString(String) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setNumberConnectedPanels(int) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the num connected panels.
- setNumberEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNumberEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNumberingSource(PartOperationImportBuilder.NumberingSourceOption) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setNumberingStartAt(int) - Method in interface nxopen.linedesigner.RenameDialogeBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setNumberInSeries(int) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setNumberIntermediate(int) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setNumberIntervals(int) - Method in interface nxopen.tooling.FlowDisplayBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setNumberList(String[]) - Method in interface nxopen.AttributeTemplatesBuilder
-
Sets the number list.
- setNumberOfBendSegments(int) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setNumberOfColors(FaceAnalysisDisplayBuilder.ColorsOptions) - Method in interface nxopen.geometricanalysis.FaceAnalysisDisplayBuilder
-
License requirements: None.
- setNumberOfColumns(int) - Method in interface nxopen.annotations.TableSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNumberOfColumns(int) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setNumberOfColumns(int) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setNumberOfColumns(int) - Method in interface nxopen.blockstyler.Table
-
License requirements: None.
- setNumberofcomponent(int) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setNumberOfContourLines(int) - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
License requirements: None.
- setNumberOfContourLines(int) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
License requirements: None.
- setNumberOfContourLines(int) - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
License requirements: None.
- setNumberOfContours(int) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setNumberOfCopies(int) - Method in interface nxopen.features.MoveObjectBuilder
-
License requirements: None.
- setNumberOfCopies(int) - Method in interface nxopen.features.OffsetCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setNumberOfCopies(int) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNumberOfCopies(int) - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setNumberOfCopies(int) - Method in interface nxopen.features.subdivision.OffsetCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setNumberOfCopies(int) - Method in interface nxopen.routing.TransformPathBuilder
-
- setNumberOfCopies(int) - Method in interface nxopen.SketchOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setNumberOfCopy(int) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumberOfCopy(int) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumberOfCopy(int) - Method in interface nxopen.tooling.ReliefDesignBuilder
-
License requirements: None.
- setNumberOfCurves(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setNumberOfCuts(int) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfCuts(int) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfDefinePoints(int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
- setNumberOfDefiningPoints(int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
Sets number of defining points
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNumberOfElementsInHysterisisLoop(int) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setNumberOfFinishPasses(int) - Method in interface nxopen.cam.FinishPassesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfFlanges(int) - Method in interface nxopen.cae.connections.IFlangesContainer
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumberOfFrames(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setNumberOfIncrements(int) - Method in interface nxopen.cae.optimization.TBSTestFunction
-
License requirements: cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setNumberOfIntermediateCuts(int) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfLayers(int) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumberOfLayers(Expression) - Method in interface nxopen.routing.OverstockBuilder
-
Sets the number of layers in case of wrapped overstock.
- setNumberOfLeaders(int) - Method in interface nxopen.annotations.LeaderBundle
-
Sets the number of leaders.
- setNumberOfLevels(int) - Method in interface nxopen.assemblies.UpdateStructureBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setNumberOfLevels(int) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfMargins(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the number of margins
License requirements: None.
- setNumberOfMargins(int) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNumberOfMaxBins(int) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setNumberOfMeanBins(int) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setNumberOfMiters(int) - Method in interface nxopen.routing.MiteredBendCorner
-
Sets the number of miters in the corner.
- setNumberOfOccurrences(int) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setNumberOfPairs(int) - Method in interface nxopen.routing.DuctReinforcementBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setNumberOfPasses(int) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfPasses(int) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfPiecesLock(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setNumberOfPoints(int) - Method in interface nxopen.weld.JointmarkGuideBuilder
-
License requirements: ugweld ("UG WELD")
.
- setNumberOfPointsOnEdge(int) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumberOfPointsOption(WeldBuilder.NumberOfPointsOnEdgeType) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumberOfRevolutions(double) - Method in interface nxopen.cam.PathHelixMotion
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfRows(int) - Method in interface nxopen.annotations.TableSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNumberOfRows(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setNumberOfRows(int) - Method in interface nxopen.features.TabNoteCfgBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setNumberOfRows(int, double) - Method in interface nxopen.GeneralScalarTable
-
Sets the number of rows
License requirements: None.
- setNumberOfSections(int) - Method in interface nxopen.cae.AxiSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setNumberOfSegments(int) - Method in interface nxopen.features.subdivision.ExtractCagePolylineBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setNumberOfSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setNumberOfSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setNumberOfSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionTubeBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setNumberOfSegments(boolean) - Method in interface nxopen.weld.GrooveBuilder
-
- setNumberOfSegments(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setNumberOfSides(int) - Method in interface nxopen.SketchPolygonBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setNumberOfStandardDeviations(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setNumberOfStarts(int) - Method in interface nxopen.cam.ThreadCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfStepovers(int) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfSteps(int) - Method in interface nxopen.cam.CornerControlBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfSubElements(int) - Method in interface nxopen.cae.OneDimensionalElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumberOfThreads(double) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfTools(int) - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberOfTools(int) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setNumberOfTurns(String) - Method in interface nxopen.features.HelixBuilder
-
- setNumberOfUPoints(int) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNumberOfValidPoints(int) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNumberOfVPoints(int) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNumberPoints(int) - Method in interface nxopen.fields.FieldProfileTable
-
License requirements: None.
- setNumberPolesSelected(int) - Method in interface nxopen.features.PoleSmoothingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setNumberRequiredFaceSets(int) - Method in interface nxopen.weld.GrooveBuilder
-
- setNumberRootDepth(String) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setNumberSegments(int) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setNumberSelectable(int) - Method in interface nxopen.blockstyler.ObjectColorPicker
-
License requirements: None.
- setNumberString(String) - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setNumberSubMeshes(int) - Method in interface nxopen.tooling.FlowDisplayBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setNumberSurfaceVectors(int) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setNumberTextVisibility(boolean) - Method in interface nxopen.cae.xyplot.MarkerStyleSetting
-
License requirements: None.
- setNumberToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumberUcheckPoints(int) - Method in interface nxopen.geometricanalysis.DeviationChecking
-
License requirements: None.
- setNumberValue(double) - Method in interface nxopen.annotations.PmiAttributeValueNumberBuilder
-
License requirements: None.
- setNumberValue(double) - Method in interface nxopen.annotations.PmiNumberBuilder
-
License requirements: None.
- setNumberValue(double) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setNumberValue(double) - Method in interface nxopen.display.CgfxAttributeValueNumberBuilder
-
- setNumberVcheckPoints(int) - Method in interface nxopen.geometricanalysis.DeviationChecking
-
License requirements: None.
- setNumChar(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNumCopy(int) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumCopy(int) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumCopy(int) - Method in interface nxopen.cae.NodeRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumCopy(int) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumCornerSides(int) - Method in interface nxopen.features.StyledCornerBuilder
-
Set number of sides of the corner
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setNumCurrentDirectionMapElements(int) - Method in interface nxopen.annotations.HatchBuilder
-
Set number of direction map elements to the annotation
License requirements: drafting ("DRAFTING")
.
- setNumDiscretizationPoints(int) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setNumElements(int) - Method in interface nxopen.cae.ContactMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumElementsOnRail1(int) - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumElementsOnRail2(int) - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumerator(double) - Method in interface nxopen.drawings.ViewScaleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setNumerator(int) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setNumeratorDegrees(int) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
License requirements: None.
- setNumeratorDegrees(int) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNumeratorFraction(double) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
License requirements: None.
- setNumeratorFraction(double) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNumeratorMinutes(int) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
License requirements: None.
- setNumeratorMinutes(int) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNumeratorSeconds(int) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
License requirements: None.
- setNumeratorSeconds(int) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNumInter(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setNumLatticeDataColumn(int) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setNumLayers(int) - Method in interface nxopen.cae.SweepBetweenMeshBuilder
-
- setNumLevels(int) - Method in interface nxopen.ame.AncestorEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setNumMeshpoints(int) - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumMinMax(int) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the number of min/max annotation for min/max type of annotation
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setNumNodes(int) - Method in interface nxopen.cae.NodesBetweenNodesBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumNodes(int) - Method in interface nxopen.cae.NodesOnCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNumOfBc(int) - Method in interface nxopen.cae.BcLabelManagerBuilder
-
License requirements: None.
- setNumOfCopyInstance(int) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setNumOfCopyInstance(int) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumOfElements(int) - Method in interface nxopen.cae.MeshControlBuilder
-
Sets the number of elements defined on edge.
- setNumOfSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setNumSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setNumSmoothIterations(int) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setNumTabs(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumTabs(int) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumTabs(int) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNumTriaxialSensors(int) - Method in interface nxopen.cae.PreTestSensorConfigBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNumUniaxialSensors(int) - Method in interface nxopen.cae.PreTestSensorConfigBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setNumVents(int) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setNurbAngleTolerance(double) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNurbFitTolerance(double) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNurbJoinSegments(boolean) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setNutSelectionType(BoltBuilder.Selection) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNutSpiderScale(double) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNutSpiderType(BoltBuilder.SpiderDiameter) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNValue(int) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setNxClassesEnabled(Tag, boolean) - Method in interface nxopen.uf.UFKf
-
- setNxColorValue(int) - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Sets the NX color value.
- setNxEquivalent(NXObject) - Method in interface nxopen.routing.SingleDevice
-
Sets the NX equivalent object.
- setNxFontCharacterSpaceFactor(CharacterSpaceFactor) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the NX font text space factor for each text type (dimension,general,appended,tolerance) for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setNxLabel(String) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setNXOpenObjectApplicationKey(NXObject) - Method in interface nxopen.features.TrackingData
-
Sets the optional application key of NXOpen::Object type for tracked entity
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setNxto2dSettingsFile(String) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setNxUnit(Unit) - Method in interface nxopen.cae.ftk.BaseUnit
-
Sets nx unit.
- setObject(ComponentPattern) - Method in interface nxopen.assemblies.ComponentPatternBuilder
-
Sets the object selected for pattern definition
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- SetObject - Class in nxopen.cae
-
Structure used to pass objects into SetManager and CAESet
- SetObject() - Constructor for class nxopen.cae.SetObject
-
- SetObject(TaggedObject, CaeSetObjectSubType, int) - Constructor for class nxopen.cae.SetObject
-
Constructor for the SetObject object.
- setObject(String, NXObject) - Method in interface nxopen.cam.CAMObject
-
Set a object to the parameter index for the object.
- setObject(NXObject) - Method in interface nxopen.motion.GraphBuilder
-
- setObjectApplication(String) - Method in interface nxopen.plas.RunBuilder
-
License requirements: None.
- setObjectArrayValue(String, NXObject[]) - Method in interface nxopen.cam.CAMObject
-
Set object array to the parameter index for the object
License requirements: cam_base ("CAM BASE")
.
- setObjectClearZone(Tag, Tag, Tag) - Method in interface nxopen.uf.UFClear
-
- setObjectCreateBuilder(ObjectCreateBuilder) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Sets
ObjectCreateBuilder
License requirements: nx_drawing_auto ("NX Drawing Automation")
Created in NX10.0.0
- setObjectCreateBuilder(ObjectCreateBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
- setObjectDescription(String) - Method in interface nxopen.ame.EngineeringObjectNameBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setObjectDescription(String) - Method in interface nxopen.ame.ObjectNameBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setObjectDescription(String) - Method in interface nxopen.ame.ObjectNameIndexBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setObjectDescription(String) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setObjectGroupName(String) - Method in interface nxopen.tooling.ReusableObject
-
License requirements: None.
- setObjectId(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setObjectiveGoal(Goal) - Method in interface nxopen.cae.optimization.DAOObjective
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setObjectives(TBSSingleObjective[]) - Method in interface nxopen.cae.optimization.TBSObjectives
-
Sets the design response
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setObjectName(String) - Method in interface nxopen.ame.EngineeringObjectNameBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setObjectName(String) - Method in interface nxopen.ame.ObjectNameBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setObjectName(String) - Method in interface nxopen.ame.ObjectNameIndexBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setObjectName(String) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setObjectName(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
- setObjectName(String) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setObjectNameDisplay(PartVisualizationNamesBorders.NameDisplay) - Method in interface nxopen.preferences.PartVisualizationNamesBorders
-
Sets the object name display
License requirements: None.
- setObjectNameOnTypeAttr() - Method in interface nxopen.ame.CreateProductBuilder
-
Sets the Object Name on Type Attribute Object.
- setObjectOffWorkPlane(SessionWorkPlane.ObjectDisplay) - Method in interface nxopen.preferences.SessionWorkPlane
-
- setObjectPicker(AttributePropertiesBaseBuilder.ObjectOptions) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
- setObjectPosition(int) - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setObjectPosition(WheelFixingBuilder.ObjectPositionType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setObjectPreferences(Tag, int[], double[], String, String) - Method in interface nxopen.uf.UFDrf
-
- setObjects(NXObject[]) - Method in interface nxopen.annotations.AssociatedObject
-
Sets the objects.
- setObjects(NXObject[]) - Method in interface nxopen.features.subdivision.CopyCageData
-
Sets the objects to be copied.
- setObjects(TaggedObject[]) - Method in interface nxopen.features.UserDefinedFeatureApplicationField
-
Sets all of the objects in this field
License requirements: None.
- setObjects(NXObject[]) - Method in interface nxopen.gateway.CopyCutBuilder
-
Sets all objects to be copied or to be cut
License requirements: None.
- setObjects(NXObject[]) - Method in interface nxopen.routing.DesignRuleViolation
-
Sets the array of objects in violation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setObjects(NXObject[]) - Method in interface nxopen.tooling.ReusableObject
-
Sets the objects
License requirements: None.
- setObjects(TaggedObject[]) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
Sets the objects to be checked
License requirements: ugweld ("UG WELD")
.
- setObjectSelectionOption(BridgeCurveBuilder.SelectedObject) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setObjectsOffSketchWorkPlaneNonSelectable(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not objects off the work
plane are non-selectable in the Sketch Task Environment.
- setObjectsOffWcsWorkPlaneNonSelectable(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not objects off the WCS work
plane are non-selectable.
- setObjectsToBeDeleted(NXObject[], AMEManager.DeleteType) - Method in interface nxopen.ame.AMEManager
-
Set the objects to be deleted
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setObjectsToCopy(NXObject[]) - Method in interface nxopen.mechatronics.ObjectSourceBuilder
-
Sets the objects to be copied.
- setObjectsVisibilityOnLayer(View, StateInfo[], boolean) - Method in interface nxopen.layer.LayerManager
-
Sets specified layer(s) visibility in a specified view.
- setObjectType(ChildrenEvaluatorBuilder.FilterType) - Method in interface nxopen.ame.ChildrenEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setObjectType(OnestepUnformBuilder.Object) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setObjectType(DraftingComponentSelectionBuilder.Geometry) - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder
-
License requirements: None.
- setObjectType(DrawingRegionBuilder.RegionDraftingObjectType) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setObjectType(PartGeometryCopyBuilder.Type) - Method in interface nxopen.features.PartGeometryCopyBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setObjectType(String) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setObjectType(CopyObjectsBuilder.Type) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setObjectType(QuickQuotationBuilder.ObjectTypes) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setObjectTypes(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipNamesListBuilder
-
Sets the current list of
ShipNamesBuilder
objects
to the types determined by the types of the supplied objects.
- setObjectTypesOfVisualReport(VisualReport.ObjectTypeOption[]) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setObjectValue(NXObject) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setObjectValue(NXObject) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setObjectView(View) - Method in interface nxopen.annotations.Associativity
-
Sets the object view.
- setObjList(Tag, int, int, int, Tag[]) - Method in interface nxopen.uf.UFClear
-
- setObjSelectType(ValidCheckBuilder.SelMode) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setObjtype1(MeasureAngleBuilder.ObjectType) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setObjtype2(MeasureAngleBuilder.ObjectType) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setObliqueExtensionLineAngle(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the oblique extension line angle
License requirements: None.
- setObliqueExtensionLineAngle(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setObservationNode(FENode) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setObservationNode(FENode) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setObstructedColor(NXColor) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOccEntityLabelOffsets(int, int, int, int, int, int) - Method in interface nxopen.cae.FEModelOccurrence
-
Sets node, element, csys, physical, group, and ply offset of the femodel occurrence
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOccupant(HumanPosturePredictionBuilder.OccupantType) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setOccurrence(int, int) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Sets the number of Occurrences.
- setOccurrenceChainable(RoutingPath.OccChainable) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setOccurrenceName(String) - Method in interface nxopen.linedesigner.RenameItemRevisionBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setOccurrenceName(NXObject, String) - Method in interface nxopen.linedesigner.UINodeUtils
-
To set occurence name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setOccurrences(NXObject[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Sets the occurrences
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOffAxisAngleChoice(PreTestExciterConfigBuilder.OffAxisAngleChoiceType) - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setOffset(double) - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setOffset(double) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setOffset(double) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setOffset(int) - Method in interface nxopen.cae.ElementModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(int) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(int) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(int) - Method in interface nxopen.cae.ElementRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(int) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(int) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setOffset(int) - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(int) - Method in interface nxopen.cae.NodeProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(int) - Method in interface nxopen.cae.NodeReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(int) - Method in interface nxopen.cae.NodeRotateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(int) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffset(double) - Method in interface nxopen.cam.BoundaryMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setOffset(double) - Method in interface nxopen.cam.BoundarySet
-
License requirements: cam_base ("CAM BASE")
.
- setOffset(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the offset of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- setOffset(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Sets the offset of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setOffset(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the offset of the keyway.
- setOffset(double) - Method in interface nxopen.display.DynamicSectionBuilder
-
Sets the the plane offset.
- setOffset(double) - Method in interface nxopen.display.Stage
-
- setOffset(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setOffset(double) - Method in interface nxopen.drawings.ViewPlacementBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffset(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffset(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffset(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffset(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
- setOffset(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setOffset(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setOffset(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setOffset(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setOffset(String) - Method in interface nxopen.geometricutilities.FaceSetOffset
-
- setOffset(Expression) - Method in interface nxopen.routing.CrossSection
-
Sets the offset expression applied to the profile when generating a Sweep.
- setOffset(double) - Method in interface nxopen.tooling.QuickDatumCsysBuilder
-
Sets the reference diameter.
- setOffset2dComponentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setOffsetAngle(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setOffsetBetweenDiagrams(double) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setOffsetByPoint(Point3d) - Method in interface nxopen.display.DynamicSectionBuilder
-
This method offsets the active clipping plane such that the plane
passes through the specified point.
- setOffsetCsys(CoordinateSystem) - Method in interface nxopen.tooling.QuickDatumCsysBuilder
-
Sets the offset csys.
- setOffsetCsysFromQuick(CoordinateSystem) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setOffsetCurveCount(int) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setOffsetCurves(Section) - Method in interface nxopen.features.Offset3DCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOffsetDatumCsys(Feature) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setOffsetDirection(boolean) - Method in interface nxopen.cam.OffsetDataBuilder
-
License requirements: None.
- setOffsetDirection(boolean) - Method in interface nxopen.features.GeodesicOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOffsetDirection(boolean) - Method in interface nxopen.features.VarOffsetFaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOffsetDirection(boolean) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetDirection(Direction) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetDirectionOption(AOCSBuilder.OffsetDirection) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetDist(double) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: None.
- setOffsetDistance(double) - Method in interface nxopen.annotations.Centerline2dBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffsetDistance(double) - Method in interface nxopen.annotations.Centerline3dBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffsetDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetDistance(double) - Method in interface nxopen.cam.OffsetDataBuilder
-
License requirements: None.
- setOffsetDistance(double) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the offset distance
License requirements: die_engineering ("DIE ENGINEERING")
.
- setOffsetDistance(double) - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- setOffsetDistance(double) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetDistance(String) - Method in interface nxopen.weld.WeldPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setOffsetDistanceFromEdge(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setOffsetDistType(AOCSBuilder.OffsetDistanceType) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setOffsetEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setOffsetEndAngle(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetExpression(String) - Method in interface nxopen.IPlane
-
Sets the plane offset expression value.
- setOffsetExpression(Expression) - Method in interface nxopen.IPlane
-
License requirements: None.
- setOffsetFileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOffsetFlip(boolean) - Method in interface nxopen.IPlane
-
Sets the flip state of the offset direction of the plane
License requirements: None.
- setOffsetFromPart(double) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setOffsetInstance(boolean) - Method in interface nxopen.features.DatumPlaneBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetIntent(ParamValueIntent) - Method in interface nxopen.cam.BoundarySet
-
License requirements: cam_base ("CAM BASE")
.
- setOffsetMatrix(Matrix3x3) - Method in interface nxopen.cam.RobotCartesianMove
-
License requirements: cam_base ("CAM BASE")
.
- setOffsetMaximumRadius(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetMethod(Centerline2dBuilder.Offset) - Method in interface nxopen.annotations.Centerline2dBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffsetMethod(Centerline3dBuilder.Offset) - Method in interface nxopen.annotations.Centerline3dBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffsetMethod(OffsetCenterPointBuilder.Offset) - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffsetMethod(ConvexMeshBuilder.OffsetMethodOption) - Method in interface nxopen.cae.ConvexMeshBuilder
-
- setOffsetMethod(WeldBeadPathBuilder.OffsetMethodType) - Method in interface nxopen.weld.WeldBeadPathBuilder
-
License requirements: ugweld ("UG WELD")
.
- setOffsetMethodType(BeamSectionOffsetOptions.Method) - Method in interface nxopen.cae.BeamSectionOffsetOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOffsetMinimumRadius(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetMode(AOCSBuilder.OffsetType) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetNegativeX(double) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetNegativeY(double) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetNegativeZ(double) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setOffsetNegativeZ(double) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetNumber(int) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setOffsetOfOffset(Tag, double[]) - Method in interface nxopen.uf.UFSo
-
- setOffsetOption(PlateChamferBuilder.OffsetMethod) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setOffsetOrientations(double[]) - Method in interface nxopen.motion.FlexBodyBuilder
-
Sets the offset orientations
License requirements: mechanisms ("MECHANISMS")
.
- setOffsetOrigin(Point3d) - Method in interface nxopen.cam.RobotCartesianMove
-
License requirements: cam_base ("CAM BASE")
.
- setOffsetPathSegments(ISegment[]) - Method in interface nxopen.routing.OffsetPath
-
The path segments for an offset object.
- setOffsetPlane(Plane) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setOffsetPoints(double[]) - Method in interface nxopen.motion.FlexBodyBuilder
-
Sets the offset points
License requirements: mechanisms ("MECHANISMS")
.
- setOffsetPosition(Point3d) - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOffsetPosition(Point3d) - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
The offset point position.
- setOffsetPositiveX(double) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetPositiveY(double) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetPositiveZ(double) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setOffsetPositiveZ(double) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetProfileToTop(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setOffsetProfileToTop(String) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setOffsetRadius(AeroJoggleBuilder.SideType, String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the offset radius expression.
- setOffsetRadius(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
THE offset radius
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setOffsetReferenceAxes(Point3d, Vector3d, Vector3d) - Method in interface nxopen.routing.OffsetPath
-
The reference axes for an offset object.
- setOffsetRelations(boolean) - Method in interface nxopen.features.ShowRelatedFacesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetReverseDirection(boolean) - Method in interface nxopen.features.ReplaceFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetRightHandSide(String) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setOffsetSections(double[]) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Indicate the sections that should be offset.
- setOffsetSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setOffsetSolid(boolean) - Method in interface nxopen.features.VarOffsetFaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOffsetSpacingMode(StiffenerSystemBuilder.OffsetSpacingModes) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setOffsetSpecified(boolean) - Method in interface nxopen.cae.BeamSectionOffsetOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOffsetSpreadsheet(String) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetStartAngle(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOffsetType(OffsetDataBuilder.OffsetDirectionMethod) - Method in interface nxopen.cam.OffsetDataBuilder
-
License requirements: None.
- setOffsetType(VerticalPosition.OffsetTypes) - Method in interface nxopen.cam.VerticalPosition
-
License requirements: cam_base ("CAM BASE")
.
- setOffsetType(FlangeBuilder.OffsetTypeOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Sets the offset type for the flange.
- setOffsetType(ExcessMaterialBuilder.Offset) - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setOffsetType(TraceLinesBuilder.TraceLineType) - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setOffsetValue(double) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Sets the offset value
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setOffsetValue(double) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOffsetValue(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setOffsetValue(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setOffsetValueForMargin(double) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOffsetValues(int, double[]) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Set the values of the offset for the specified section.
- setOffsetVector(int, Direction) - Method in interface nxopen.cae.connections.ILineOffset
-
Sets the line offset vector
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffsetVector(Direction) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOffsetVector(Direction) - Method in interface nxopen.cam.OffsetDataBuilder
-
License requirements: None.
- setOffsetVector(Vector3d) - Method in interface nxopen.routing.OffsetPath
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setOffsetView(Direction) - Method in interface nxopen.features.RibbonBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOffsetViewDirection(Direction) - Method in interface nxopen.features.Offset3DCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOffsetViewDirection(Direction) - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- setOffsetX(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setOffsetY(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setOffsheetReference(Node) - Method in interface nxopen.diagramming.NodeBuilder
-
License requirements: None.
- setOk(boolean) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOldStringInName(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOmitLastPass(boolean) - Method in interface nxopen.cam.TurnCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setOmitPartiallyMapped(boolean) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setOmitReversals(boolean) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOmittedAttributes(CharacteristicList) - Method in interface nxopen.routing.TransformPathBuilder
-
Set attributes to be omitted.
- setOnBeginLabelEditHandler(Tree.OnBeginLabelEditCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on-begin-label-edit callback
License requirements: None.
- setOnDefaultActionHandler(Tree.OnDefaultActionCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on select node callback
License requirements: None.
- setOnDeleteNodeHandler(Tree.OnDeleteNodeCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets on delete node callback
License requirements: None.
- setOnDropHandler(Tree.OnDropCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the callback handler for node drop
License requirements: None.
- setOnDropMenuHandler(Tree.OnDropMenuCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the callback handler for on drop menu.
- setOnEditOptionSelectedHandler(Tree.OnEditOptionSelectedCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on-end-label-edit callback
License requirements: None.
- setOneEdgeSelector(Edge) - Method in interface nxopen.geometricutilities.RegionTracker
-
An input target or tool edge used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOneFaceSelector(Face) - Method in interface nxopen.geometricutilities.RegionTracker
-
An input target or tool face used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOnEndLabelEditHandler(Tree.OnEndLabelEditCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on-end-label-edit callback
License requirements: None.
- setOnePointSelector(Point3d) - Method in interface nxopen.geometricutilities.RegionTracker
-
The input point location (x,y,z) used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOneToOne(boolean) - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
License requirements: None.
- setOneVertexSelector(Edge, RegionTracker.ExtremityType) - Method in interface nxopen.geometricutilities.RegionTracker
-
One input target or tool vertex (edge extremity) used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOnExpandHandler(Tree.OnExpandCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on expand callback to the tree.
- setOnFacePlacementMethod(TextBuilder.OnFacePlacementMethodOptions) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOnInsertColumnHandler(Tree.OnInsertColumnCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on insert column callback to the tree.
- setOnInsertNodeHandler(Tree.OnInsertNodeCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on insert node callback.
- setOnLegacyViewUpdate(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOnlyCheckHoleFace(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOnlyImportDesignParts(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the only import design parts flag for Solid Edge.
- setOnlyPrimaryPlacementSolutions(boolean) - Method in interface nxopen.routing.PlacementSolutionsBuilder
-
True tells Place Part to only consider the primary placement solutions.
- setOnMenuHandler(Tree.OnMenuCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on menu callback
License requirements: None.
- setOnMenuHandler(Wizard.OnMenuCallback) - Method in interface nxopen.blockstyler.Wizard
-
Sets the OnMenu handler.
- setOnMenuSelectionHandler(Tree.OnMenuSelectionCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on menu selection callback
License requirements: None.
- setOnMenuSelectionHandler(Wizard.OnMenuSelectionCallback) - Method in interface nxopen.blockstyler.Wizard
-
Sets the OnMenuSelection handler.
- setOnPreSelectHandler(Tree.OnPreSelectCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets on pre select callback
License requirements: None.
- setOnSelectHandler(Tree.OnSelectCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on select node callback
License requirements: None.
- setOnStateChangeHandler(Tree.OnStateChangeCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the on state change callback.
- setOnSubNodeHandler(Wizard.OnSubNodeCallback) - Method in interface nxopen.blockstyler.Wizard
-
Sets the OnSubNode handler.
- setOnTool(boolean) - Method in interface nxopen.geometricutilities.RegionTracker
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOnViewSelection(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOP1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOP1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOP2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOp2OutputOption(TBSOutputControlOptions.Op2Option) - Method in interface nxopen.cae.optimization.TBSOutputControlOptions
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setOP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOP2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setOpacity(double) - Method in interface nxopen.diagramming.SheetBuilder
-
License requirements: None.
- setOpcFileBrowser(String) - Method in interface nxopen.mechatronics.OPCClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOPCServerName(String) - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOPCSignalAccess(OPCClientBuilder.TagAccess) - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOPCSignalName(String) - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOPCSignalType(SignalConnectionBuilder.DataType) - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOpenConvertedPmiDestinationPart(boolean) - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOpenDist(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setOpenField(String[]) - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
Sets the open field
License requirements: None.
- setOpenField(String[]) - Method in interface nxopen.annotations.ProcessSpecificationBuilder
-
Sets the open field
License requirements: None.
- setOpenFile(boolean) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOpenFile(boolean) - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setOpeningAddGate(boolean) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setOpeningStyleEnum(GateFeatureBuilder.GateOpeningStyle) - Method in interface nxopen.linedesigner.GateFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setOpeningStyleEnum(RailOpeningFeatureBuilder.GateOpeningStyle) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setOpenPassword(String, String) - Method in interface nxopen.PartCollection
-
Input password for opening the part.
- setOpenProfileSmartVolumeOption(boolean) - Method in interface nxopen.geometricutilities.SmartVolumeProfileBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOpenReportDocumentAfterExport(boolean) - Method in interface nxopen.report.ReportPreference
-
License requirements: None.
- setOpenSignalFunction(Function) - Method in interface nxopen.motion.SignalChartBuilder
-
Sets the open signal function
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setOpenUnloadedParents(LoadInterpartDataBuilder.OpenUnloadedParentsType) - Method in interface nxopen.assemblies.LoadInterpartDataBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setOperateOption(BaseDataImportExportBuilder.OperateOptions) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setOperation(ResultMeasure.Operation) - Method in interface nxopen.cae.ResultMeasureResultOptions
-
Set the operation type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOperation(ResultsEnvelopeBuilder.Operation) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
The operation
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOperation(Feature.BooleanType) - Method in interface nxopen.features.BooleanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOperation(ColorFeatureGroupBuilder.OperationType) - Method in interface nxopen.features.ColorFeatureGroupBuilder
-
License requirements: None.
- setOperation(TrimAndExtendBuilder.OperationType) - Method in interface nxopen.features.TrimAndExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOperation(PatternIncrementItem.OperationEnum) - Method in interface nxopen.geometricutilities.PatternIncrementItem
-
License requirements: None.
- setOperationAddonCondition(String, String, String) - Method in interface nxopen.cam.OperationSetTeaching
-
Sets the operation addon conditions
License requirements: fbm_author ("FBM Author")
.
- setOperationCondition(String, String) - Method in interface nxopen.cam.OperationSetTeaching
-
Sets the operation conditions
License requirements: fbm_author ("FBM Author")
.
- setOperationCushionSettings(int, double, double, double, double) - Method in interface nxopen.die.PressModel
-
Set operation cushion values (Obsolete)
License requirements: ug_die_design ("Die Design")
.
- setOperationCushionSettings2(int, double, int, double, int, double, double) - Method in interface nxopen.die.PressModel
-
Set operation cushion values
License requirements: ug_die_design ("Die Design")
.
- setOperationID(String) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOperationName(String) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOperationName(String) - Method in interface nxopen.cam.PathLevelMarker
-
License requirements: None.
- setOperationName(String) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOperationOption(TrimCurve2Builder.Operation) - Method in interface nxopen.features.TrimCurve2Builder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOperations(Operation[]) - Method in interface nxopen.cam.OperationTeaching
-
Sets the selected operations
License requirements: fbm_author ("FBM Author")
.
- setOperations(NXObject[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Sets the operations
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOperationSlideHeight(int, double) - Method in interface nxopen.die.PressModel
-
Set operation slide height
License requirements: ug_die_design ("Die Design")
.
- setOperationState(ProjectNodesToCadGeometryBuilder.Operation) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOperationSubType(PartOperationCopyBuilder.OperationSubType) - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
- setOperationSubType(PartOperationCreateBuilder.OperationSubType) - Method in interface nxopen.pdm.PartOperationCreateBuilder
-
- setOperationToCheck(Operation) - Method in interface nxopen.cam.CutDepthChecker
-
License requirements: cam_base ("CAM BASE")
.
- setOperationTransportCurveSet(int, int) - Method in interface nxopen.die.PressModel
-
Tell the press model which transport curve set to use in the given operation
License requirements: ug_die_design ("Die Design")
.
- setOperationType(BoltBuilder.BoltOperation) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOperationType(ElementModifyOrderBuilder.Operation) - Method in interface nxopen.cae.ElementModifyOrderBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOperationType(RapidSurfaceBuilder.OperationTypes) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOperationTypes(GanttOperationBuilder.OperationType) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOperationUserTransportCurves(int, double[]) - Method in interface nxopen.die.PressModel
-
Set values of the User Defined transport curve set, for given operation
License requirements: ug_die_design ("Die Design")
.
- setOperator(GanttOperationParameterBuilder.OperatorOption) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOperatorControlType(OvercrownBuilder.ControlType) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOperatorMessage(String[]) - Method in interface nxopen.cam.ManualControlBuilder
-
Sets the operator message
License requirements: cam_base ("CAM BASE")
.
- setOperatorMessage(String) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOperatorOperationType(OvercrownBuilder.OperationType) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOperatorOutputType(OvercrownBuilder.OutputType) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOperatorTransitionType(OvercrownBuilder.TransitionType) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOperatorType(PlcRule.Type) - Method in interface nxopen.ame.OperatorRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setOperatorType(Condition.OperatorOption) - Method in interface nxopen.visualreporting.Condition
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setOperatorTypeOfCondition(Condition, Condition.OperatorOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setOperatorValue(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOperListProgramGroup(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setOpName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOppositeCorner(Point) - Method in interface nxopen.fields.SpatialMapBuilder
-
License requirements: None.
- setOppositeDirection(boolean) - Method in interface nxopen.cam.CylinderMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOppositeFilletLengths(JointExitBuilder.FilletSizes) - Method in interface nxopen.weld.JointExitBuilder
-
Sets the fillet weld values for the opposite side of the welding joint.
- setOppositeSense(boolean) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
License requirements: None.
- setOppositeSide(boolean) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
License requirements: None.
- setOppositeSideExtensionOption(LawExtensionBuilder.OppositeSideExtensionOptions) - Method in interface nxopen.features.LawExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setOppositeSideExtensionOption(LawExtensionBuilderEx.OppositeSideExtensionOptions) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setOpstops(int) - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOptimalPoint1(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setOptimalPoint2(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setOptimalPoint3(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setOptimization(HoleBossGeom.OptimizationTypes) - Method in interface nxopen.cam.HoleBossGeom
-
License requirements: cam_base ("CAM BASE")
.
- setOptimizationBasedOn(OperationBuilder.OptimizationBasedOnTypes) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOptimizationConstraints(String[], NXObject[], OptimizationBuilder.OptimizationAttributeType[], double[], double[], OptimizationBuilder.OptimizationConstraintLimitType[]) - Method in interface nxopen.optimization.OptimizationBuilder
-
Sets the constraints
License requirements: None.
- setOptimizationDesignVariables(DAOConstraint[]) - Method in interface nxopen.cae.optimization.DAOSolution
-
- setOptimizationDistanceMethod(OperationBuilder.OptimizationDistanceTypes) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOptimizationLevel(OperationBuilder.OptimizationLevelTypes) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOptimizationMethod(ParamBuilder.OptimizationTypes) - Method in interface nxopen.cam.ParamBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOptimizationObjectives(String[], NXObject[], OptimizationBuilder.OptimizationAttributeType[], double[]) - Method in interface nxopen.optimization.OptimizationBuilder
-
Sets the objectives
License requirements: None.
- setOptimizationType(OptimizationBuilder.OptimizationTargetType) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setOptimizationVariables(String[], NXObject[], OptimizationBuilder.OptimizationAttributeType[], double[], double[]) - Method in interface nxopen.optimization.OptimizationBuilder
-
Sets the variables
License requirements: None.
- setOptimize(boolean) - Method in interface nxopen.AcisImporter
-
License requirements: None.
- setOptimize(boolean) - Method in interface nxopen.Catiav4Importer
-
License requirements: None.
- setOptimize(boolean) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setOptimize(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setOptimize(boolean) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOptimize(boolean) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setOptimize(boolean) - Method in interface nxopen.ProeImporter
-
License requirements: None.
- setOptimize(boolean) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setOptimize(boolean) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setOptimize(boolean) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setOptimizeCurve(boolean) - Method in interface nxopen.preferences.PartModeling
-
License requirements: None.
- setOptimizeCurveAngleToleranceFactor(double) - Method in interface nxopen.preferences.PartModeling
-
License requirements: None.
- setOptimizeCurveDistanceToleranceFactor(double) - Method in interface nxopen.preferences.PartModeling
-
License requirements: None.
- setOptimizeCurveToleranceFactor(double) - Method in interface nxopen.preferences.PartModeling
-
- setOptimizedCutLevelColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setOptimizeFeedRateWhenGenerating(boolean) - Method in interface nxopen.cam.FeedsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOptimizePath(boolean) - Method in interface nxopen.cam.UpDownCutting
-
License requirements: cam_base ("CAM BASE")
.
- setOptimizerControl(DAOStopCondition) - Method in interface nxopen.cae.optimization.DAOSolution
-
- setOptimizeSettings(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOption(boolean) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setOption(PitchSetting.OptionTypes) - Method in interface nxopen.cam.PitchSetting
-
License requirements: cam_base ("CAM BASE")
.
- setOption(TrimPoint.Options) - Method in interface nxopen.cam.TrimPoint
-
License requirements: cam_base ("CAM BASE")
.
- setOption(ZAxisSmoothing.Options) - Method in interface nxopen.cam.ZAxisSmoothing
-
License requirements: cam_base ("CAM BASE")
.
- setOption(DrawingSheetBuilder.SheetOption) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOption(ChamferBuilder.ChamferOption) - Method in interface nxopen.features.ChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOption(EmbossProjection.ProjectionOption) - Method in interface nxopen.features.EmbossProjection
-
Sets the projection option
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOption(Type) - Method in interface nxopen.geometricutilities.FeatureOffset
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOption(ModlMotion.Options) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOptional(boolean) - Method in interface nxopen.report.BaseArgument
-
License requirements: None.
- setOptionalAttributes(CharacteristicList) - Method in interface nxopen.routing.WatertightFittingsBuilder
-
Set optional attributes for Watertight Fittings.
- setOptionalGeometry(DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Sets one geometry for input selection which has multiple options.
- setOptionMask(int) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setOptionMenuTitle(String) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setOptionsColor01(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor02(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor03(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor04(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor05(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor06(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor07(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor08(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor09(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor10(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor11(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsColor12(NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsCreateBall(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsCreateThicknessText(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsDisplayDynamicBall(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsDisplayMeshElements(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsDisplayOppositeMeshElements(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsDisplayThicknessVectors(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsDynamicSnapToVertex(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLegendControl(WallThicknessCheckerBuilder.LegendControl) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit01(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit02(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit03(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit04(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit05(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit06(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit07(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit08(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit09(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit10(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit11(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsLowerLimit12(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsNumberOfColors(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsNumDecimals(int) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsRangeHighLimit(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsRangeLowLimit(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsRangeType(WallThicknessCheckerBuilder.RangeType) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsSaveThicknessVectorsAsLines(boolean) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit01(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit02(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit03(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit04(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit05(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit06(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit07(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit08(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit09(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit10(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit11(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionsUpperLimit12(double) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
License requirements: None.
- setOptionText(String) - Method in interface nxopen.cam.UdeParameter
-
License requirements: cam_base ("CAM BASE")
.
- setOptionType(MultipleViewPlacementBuilder.Option) - Method in interface nxopen.drawings.MultipleViewPlacementBuilder
-
License requirements: None.
- setOptionUpdateSubsetOnLoad(LoadOptions.UpdateSubsetOnLoad) - Method in interface nxopen.LoadOptions
-
Sets the option that controls the subset updates during load
License requirements: None.
- setOptionValue(String) - Method in interface nxopen.cam.UdeParameter
-
- setOrbitType(UndersizeBuilder.Orbit) - Method in interface nxopen.tooling.UndersizeBuilder
-
License requirements: None.
- setOrder(OrderAspectsBuilder.OrderType[]) - Method in interface nxopen.ame.OrderAspectsBuilder
-
The order for the aspects
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setOrder(DmCmMultiplePassesCiBuilder.OrderType) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOrder(MultiplePassesBuilder.OrderTypes) - Method in interface nxopen.cam.MultiplePassesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOrderGridCount(int) - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour
-
License requirements: None.
- setOrderInterval(double) - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour
-
License requirements: None.
- setOrderRegionsType(DmAmBuilder.OrderRegionsOptTypes) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOrderValue(SortingBlockBuilder.Order) - Method in interface nxopen.ame.SortingBlockBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setOrderValue(double) - Method in interface nxopen.cae.AfuZHeaderInfo
-
Sets the value of order field
License requirements: None.
- setOrdinateCustomMarkerLabel(String) - Method in interface nxopen.cae.xyplot.PlotGraphTemplate
-
License requirements: None.
- setOrdinateDimension(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setOrdinateDimensionPreferences(OrdinateDimensionPreferences) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the ordinate dimension preferences
License requirements: None.
- setOrdinateTextAngle(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setOrdinateTextOrientation(TextOrientation) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setOrdinateView(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOriCsystem(CoordinateSystem) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOriCsystem(CoordinateSystem) - Method in interface nxopen.cae.GapEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOriDirr(Direction) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOriDirr(Direction) - Method in interface nxopen.cae.GapEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOrient(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOrient(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOrient(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOrientation(ChamferOrientationType) - Method in interface nxopen.annotations.BaseChamferDimensionBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setOrientation(TextOrientation) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setOrientation(Matrix3x3) - Method in interface nxopen.AutomaticTraceline
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setOrientation(double) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setOrientation(boolean) - Method in interface nxopen.cae.LbcAssociationMgr
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOrientation(TextOrientation) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setOrientation(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setOrientation(Point3d, Vector3d, Vector3d) - Method in interface nxopen.Conic
-
Sets the center of the conic.
- setOrientation(ISurface) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Sets the orientation plane of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- setOrientation(boolean) - Method in interface nxopen.drawings.SvtBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOrientation(Vector3d, Vector3d) - Method in interface nxopen.features.BlockFeatureBuilder
-
Sets the orientation for the block
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOrientation(Matrix3x3) - Method in interface nxopen.features.HumanBuilder
-
Sets human orientaion
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setOrientation(Matrix3x3) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setOrientation(FlatSolidBuilder.OrientationType) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Sets the option which decides if the flattened solid will be transformed to Absolute CSYS.
- setOrientation(FlatSolidBuilder.OrientationType) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Sets the option which decides if the flattened solid will be transformed to Absolute CSYS.
- setOrientation(NXObject, ManufacturingAssemblyNavigatorBuilder.OrientationType) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Set the container orientation
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setOrientation(Direction) - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setOrientation(Direction) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setOrientation(MeasureAngleBuilder.OrientationType) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOrientation(CoordinateSystem) - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOrientation(CoordinateSystem) - Method in interface nxopen.mechatronics.CollisionShapeBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOrientation(CoordinateSystem) - Method in interface nxopen.mechatronics.InclinometerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOrientation(CoordinateSystem) - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOrientation(CoordinateSystem) - Method in interface nxopen.mechatronics.TransmitterExitBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOrientation(NXMatrix) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setOrientation(SessionVisualizationHighQualityImage.OrientationType) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage
-
Sets the orientation for the High Quality Image (portrait or landscape).
- setOrientation(PrintBuilder.OrientationOption) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setOrientation(CoordinateSystem) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setOrientation(Matrix3x3) - Method in interface nxopen.Xform
-
Sets the orientation
License requirements: None.
- setOrientationAngleRule(FeatureParmsBuilder.OrientationAngleRuleTypes) - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setOrientationAngleRule(FeatureParmsBuilder.OrientationAngleRuleTypes) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setOrientationBySupport(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setOrientationColor(ElementMaterialOrientationCheckBuilder.MaterialOrientationType, NXColor) - Method in interface nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder
-
Sets display color of a specified material orientation type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOrientationCsys(CoordinateSystem) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setOrientationCsys(CoordinateSystem) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setOrientationCsys(CoordinateSystem) - Method in interface nxopen.features.shipdesign.PinJigBuilder
-
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setOrientationMethod(OffsetSurfaceBuilder.OrientationMethodType) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Sets the orientation method
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOrientationMethod(EdgeReinforcementBuilder.OrientationMethods) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setOrientationMethod(StiffenerSystemBuilder.OrientationMethods) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
- setOrientationMethod(OrientationRegionItemBuilder.OrientationMethodTypes) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setOrientationMethod(StiffenerSystemBuilder.OrientationMethods) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setOrientationMethod(StiffenerSystemBuilder.OrientationMethods) - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setOrientationMethod(TextBuilder.OrientationMethodOptions) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOrientationMethod(JointmarkBuilder.OrientationMethodTypes) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setOrientationOption(HelixBuilder.OrientationOptions) - Method in interface nxopen.features.HelixBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOrientationOption(LinearDimensionBuilder.OrientationOptionType) - Method in interface nxopen.features.LinearDimensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOrientationOption(OrientationMethodBuilder.OrientationOptions) - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
- setOrientationPlane(IOrientation) - Method in interface nxopen.die.PadChildBuilder
-
Sets the orientation plane of the die pad.
- setOrientationPlaneType(SearchCriteriaFeatureControlFrameBuilder.OrientationPlaneOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setOrientationPoint(Point) - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOrientationReferenceCSYS(Matrix3x3) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOrientationState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOrientationState(BushingEADBuilder.State) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOrientationState(GapEADBuilder.State) - Method in interface nxopen.cae.GapEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOrientationStatus(boolean) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setOrientationType(SimLoadRecipeMapping.OrientationTypes) - Method in interface nxopen.cae.SimLoadRecipeMapping
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOrientationType(GeometryGroup.OrientationTypes) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setOrientationType(LaserHeadOrientation.Types) - Method in interface nxopen.cam.LaserHeadOrientation
-
License requirements: cam_base ("CAM BASE")
.
- setOrientationType(View2dOrientBuilder.Type) - Method in interface nxopen.drawings.View2dOrientBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOrientationType(ViewOrientationBuilder.Orientation) - Method in interface nxopen.drawings.ViewOrientationBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOrientationType(ViewStyleFPCalloutConfigBuilder.OrientationType) - Method in interface nxopen.drawings.ViewStyleFPCalloutConfigBuilder
-
Sets the orientation type for flat pattern callouts.
- setOrientationType(BushingDefine.OrientationTypes) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setOrientationUpFace(NXObject, TaggedObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Set the container orientation up face
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- setOrientationVector(Direction) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling"), nx_freeform_1 ("basic freeform modeling")
.
- setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
- setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setOrientationVector(Direction) - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setOrientationVector(Direction) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOrientationVector(Direction) - Method in interface nxopen.geometricutilities.OrientationMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOrientedElement(FEElement) - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOrientEnum(StudioImageCaptureBuilder.OrientEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder
-
License requirements: None.
- setOrientPitch(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setOrientPitch(IntermediateStageBuilder.Orientations) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOrientSectionToDraw(DrawBeadBuilder.OrientSectionToDrawTypes) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOrientType(ProfileBuilder.OrientationOption) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setOrientType(StiffenerBuilder.OrientationMethod) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setOrientVector(Direction) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setOrigin(Annotation.AssociativeOriginData, Point3d) - Method in interface nxopen.annotations.AnnotationPlacement
-
Sets the origin of the current annotation
License requirements: drafting ("DRAFTING")
.
- setOrigin(Point3d) - Method in interface nxopen.annotations.DefineTitleBlockBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setOrigin(Point) - Method in interface nxopen.annotations.RegionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setOrigin(Point3d) - Method in interface nxopen.Axis
-
Sets the origin for a non-associative axis.
- setOrigin(Point3d) - Method in interface nxopen.blockstyler.ReverseDirection
-
License requirements: None.
- setOrigin(Point3d) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setOrigin(Point3d) - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
Set vector origin for extracting data for x axis
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setOrigin(Point3d) - Method in interface nxopen.CoordinateSystem
-
License requirements: None.
- setOrigin(SheetBordersAndZonesBuilder.ZoneOrigin) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setOrigin(ZoneOrigin) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setOrigin(Point3d) - Method in interface nxopen.die.LineupBuilder
-
Sets the origin of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.
- setOrigin(Point3d) - Method in interface nxopen.die.QuickBinderWrapBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setOrigin(Point3d) - Method in interface nxopen.Direction
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOrigin(Point) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setOrigin(Point3d) - Method in interface nxopen.display.DynamicSectionBuilder
-
Sets the section origin.
- setOrigin(BordersAndZonesBuilder.ZoneOrigin) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setOrigin(Point) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setOrigin(ZoneOrigin) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOrigin(Point3d) - Method in interface nxopen.features.BlockFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOrigin(Point3d) - Method in interface nxopen.features.CylinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOrigin(Point3d) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setOrigin(ClosedCornerBuilder.OriginTypes) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setOrigin(Point) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- setOrigin(Point) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setOrigin(Point) - Method in interface nxopen.fields.SpatialMapBuilder
-
License requirements: None.
- setOrigin(Point3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setOrigin(Point3d) - Method in interface nxopen.geometricutilities.AnchorLocatorBuilder
-
License requirements: None.
- setOrigin(Point3d) - Method in interface nxopen.IPlane
-
License requirements: None.
- setOrigin(Point) - Method in interface nxopen.motion.LinkAttachmentData
-
License requirements: None.
- setOrigin(Point) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setOrigin(Point) - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setOrigin(Tag, double[]) - Method in interface nxopen.uf.UFCsys
-
- setOrigin(Tag, double[]) - Method in interface nxopen.uf.UFDrf
-
- setOrigin(Point3d) - Method in interface nxopen.View
-
Moves the given position to the center of the view.
- setOrigin(Point3d) - Method in interface nxopen.WCS
-
License requirements: None.
- setOrigin(Point3d) - Method in interface nxopen.Xform
-
Sets the coordinates of the origin
License requirements: None.
- setOriginalBodyOption(CleanupFacetBodyBuilder.OriginalBodyOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOriginalBodyOption(ConvertFacetBodyBuilder.OriginalBodyOptions) - Method in interface nxopen.facet.ConvertFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOriginalBodyOption(FacetBodyFromBodyBuilder.OriginalBodyOptions) - Method in interface nxopen.facet.FacetBodyFromBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOriginalColorShellOptions(PartVisualizationEmphasis.OriginalColorShellOptions) - Method in interface nxopen.preferences.PartVisualizationEmphasis
-
Modifies options that control the appearance of de-emphasized
shaded geometry when the See-Thru style is set to Original Color
Shell.
- setOriginalDesignBody(Body) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setOriginalFace(Face) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Sets the originally selected face.
- setOriginalMfgBody(Body) - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setOriginalNodeLocationColor(NXColor) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOriginalObjectsDeleted(boolean) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setOriginalResultOption(CyclicSymmetricParameters.OriginalResult) - Method in interface nxopen.cae.CyclicSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setOriginals(CutCopyPasteBuilder.TypeOperation) - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOriginalSurfaceSmooth(TBSSmoothBuilder.OriginalSurfaceSmoothingOption) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setOriginAnchorOrigin(Point3d) - Method in interface nxopen.die.QuickBinderBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOriginAndLengths(Point3d, String, String, String) - Method in interface nxopen.features.BlockFeatureBuilder
-
Create a block by setting the origin and the block length, width, and height.
- setOriginAndMatrix(Point3d, Matrix3x3) - Method in interface nxopen.WCS
-
Sets the origin and orientation matrix of the WCS
License requirements: None.
- setOriginCentered(boolean) - Method in interface nxopen.annotations.Dimension
-
Sets a flag indicating whether the dimension text is centered
equally between the extension lines.
- setOriginDisplay(OrdinateOriginDisplayOption) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the origin display option
License requirements: None.
- setOriginOption(SessionSketch.OriginType) - Method in interface nxopen.preferences.SessionSketch
-
- setOriginOption(OriginMethod) - Method in interface nxopen.SketchInPlaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
- setOriginOptionInfer(OriginMethod) - Method in interface nxopen.SketchInPlaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
- setOriginPath(String) - Method in interface nxopen.layout2d.PublishComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setOriginPoint(Point3d) - Method in interface nxopen.annotations.OriginBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setOriginPoint(Point) - Method in interface nxopen.features.BlockFeatureBuilder
-
License requirements: None.
- setOriginPoint(Point) - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
.
- setOriginPoint(Point) - Method in interface nxopen.motion.MarkerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setOriginPosition(Point3d) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setOriginSpecified(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setOriginType(ThreeBendCornerBuilder.OriginTypes) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setOriMethod(BeamEADBuilder.OrientationMethod) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOriMethod(BushingEADBuilder.OrientationMethod) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOriMethod(GapEADBuilder.OrientationMethod) - Method in interface nxopen.cae.GapEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOrphanNodeMovementOption(int) - Method in interface nxopen.cae.AutomaticMorphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOrthotropicFailureCriterion(DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setOrthotropicFatigueCriterion(DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setOrthotropicMeanStress(DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setOtherColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Sets the other color
License requirements: None.
- setOtherSideData(LineWeldSideData) - Method in interface nxopen.annotations.LineWeldData
-
Sets the other side data
License requirements: None.
- setOtherSideSymbol(Symbol) - Method in interface nxopen.weld.JointExitBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setOthersOffset(int) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOuterCornerTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the the outer corner treatment type in Flat as Solid operation
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setOuterCornerTreatmentType(boolean, FeatureProperty) - Method in interface nxopen.preferences.PartSheetmetal
-
SETS the outer corner treatment type in Flat as Solid operation
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setOuterCornerTreatmentValue(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the outer corner treatment value for Flat as Solid operations
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setOuterCornerTreatmentValue(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
THE outer corner treatment value for Flat as Solid operations
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setOuterDiameter(double) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setOuterDiameter(double) - Method in interface nxopen.routing.StockDefinition
-
Sets the outer diameter
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setOuterDiameterType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setOuterDiameterValue(double) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setOuterMold(boolean) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setOuterRoughOffset(boolean) - Method in interface nxopen.tooling.ShimBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOuterTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOutlineColor(NXColor) - Method in interface nxopen.assemblies.ProductOutlineBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setOutlineColor(NXColor) - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
License requirements: None.
- setOutlineColor(NXColor) - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting
-
License requirements: None.
- setOutlineColor(NXColor) - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting
-
- setOutlineColor(NXColor) - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
-
License requirements: None.
- setOutlineEnlargeTimes(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setOutlineEnum(PlatformEquipmentBuilder.OutlineTypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setOutOfDate() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
To set the out of date status of the motion.
- setOutOfDate() - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
To set the out of date status of the cam.
- setOutOfDate() - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
To set the out of date status of the cam.
- setOutOfDate() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
To set the out of date status of the motion.
- setOutOfDateColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch out of date curve color
License requirements: None.
- setOutput(ResultsCombinationBuilder.Output) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
Set output type from result combination
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOutput(ResultsEnvelopeBuilder.Output) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
Set output type from result envelope
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOutput(ResultsReductionBuilder.Output) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set output type from result reduction
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOutput(ProbeOutputControl.OutputType) - Method in interface nxopen.cam.ProbeOutputControl
-
License requirements: None.
- setOutput(DrawBeadBuilder.OutputTypes) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOutput(ViewCopyTo3dBuilder.OutputOption) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setOutput(PatchOpeningsBuilder.OutputTypes) - Method in interface nxopen.features.PatchOpeningsBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setOutput(UnsewBuilder.UnsewOutput) - Method in interface nxopen.features.UnsewBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOutput(SectionAnalysisBuilder.OutputType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setOutput(SectionAnalysisExBuilder.OutputType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setOutput(PrintBuilder.OutputOption) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setOutput(ExportWeldBuilder.OutputType) - Method in interface nxopen.weld.ExportWeldBuilder
-
License requirements: ugweld ("UG WELD")
.
- setOutputAfuFileName(String) - Method in interface nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setOutputAttributes(boolean) - Method in interface nxopen.weld.InformationBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setOutputBallCenter(boolean) - Method in interface nxopen.cam.CAMSetup
-
License requirements: cam_base ("CAM BASE")
.
- setOutputContactData(boolean) - Method in interface nxopen.cam.NcmScBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOutputContactPoint(boolean) - Method in interface nxopen.cam.Cutcom
-
License requirements: cam_base ("CAM BASE")
.
- setOutputCurveType(JoinCurvesBuilder.OutputCurve) - Method in interface nxopen.features.JoinCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOutputCylTolerance(boolean) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
License requirements: None.
- setOutputDirectory(String) - Method in interface nxopen.sim.ExportMachineKitBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setOutputDirectory(String) - Method in interface nxopen.sim.ImportMachineKitBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setOutputDirectory(String) - Method in interface nxopen.sim.MachineKitBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setOutputDirectory(String) - Method in interface nxopen.VirtuallabImporter
-
License requirements: None.
- setOutputDiretory(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOutputElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder
-
Sets destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setOutputElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
Sets the destination elements
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setOutputExactGeometry(boolean) - Method in interface nxopen.features.TrimSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOutputExperience(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setOutputFeatures(OutputFeatureData[]) - Method in interface nxopen.features.CustomFeaturePostUpdateEvent
-
The output features created in post update event
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOutputFile(String) - Method in interface nxopen.AcisExporter
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.ASCImporter
-
License requirements: nx_layout ("NX Layout")
.
- setOutputFile(String) - Method in interface nxopen.cae.CreateJtBuilder
-
The output file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setOutputFile(String) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
The output file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOutputFile(String) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOutputFile(String) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOutputFile(String) - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setOutputFile(String) - Method in interface nxopen.Catiav4Creator
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.Catiav5Creator
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setOutputFile(String) - Method in interface nxopen.features.shipdesign.FrameBarOutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setOutputFile(String) - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setOutputFile(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.ProeImporter
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.Step203Creator
-
- setOutputFile(String) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.Step214Creator
-
- setOutputFile(String) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setOutputFile(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Sets the output file.
- setOutputFile(String) - Method in interface nxopen.tooling.SIZERExportBuilder
-
License requirements: mechanisms ("MECHANISMS") OR nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setOutputFileDir(String) - Method in interface nxopen.cae.connections.ComposerData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOutputFileName(String) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setOutputFileType(DxfdwgCreator.OutputFileTypeOption) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setOutputFileType(NXTo2dCreator.OutputAsOption) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setOutputFilletFaceInfo(boolean) - Method in interface nxopen.weld.ExportWeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setOutputFolder(String) - Method in interface nxopen.tooling.CloneObject
-
License requirements: None.
- setOutputFormat(InspectionAnalyzeOutputBuilder.OutputFormatType) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOutputFormat(InspectionGraphicalReportOutputBuilder.OutputFormatType) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setOutputFormat(WorkInstructionOutputBuilder.OutputFormatType) - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setOutputGeometryType(WeldFeatureOutput) - Method in interface nxopen.weld.GrooveBuilder
-
- setOutputJtFile(String) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setOutputLayer(int) - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setOutputLengthAndVolume(boolean) - Method in interface nxopen.weld.InformationBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setOutputLoadTool(boolean) - Method in interface nxopen.cam.Ude
-
License requirements: None.
- setOutputLogFile(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setOutputMethod(TrimLineDevelopmentBuilder.OutputMethodName) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOutputMethod(GeometricProperties.OutputType) - Method in interface nxopen.geometricanalysis.GeometricProperties
-
License requirements: None.
- setOutputMode(FeedsWedmBuilder.OutputTypes) - Method in interface nxopen.cam.FeedsWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOutputMultipleSheets(boolean) - Method in interface nxopen.features.SewBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setOutputName(String) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
The output name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOutputNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder
-
Sets destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setOutputNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
Sets the destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setOutputNullBandTolerance(boolean) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
License requirements: None.
- setOutputOperatorMessage(boolean) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOutputOpskip(boolean) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOutputOpstop(boolean) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOutputOption(boolean) - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOutputOption(CenterlineDrillTurningBuilder.OutputOptionTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOutputOption(OffsetSurfaceBuilder.OutputOptionType) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOutputOption(PatternFeatureBuilder.OutputOptions) - Method in interface nxopen.features.PatternFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOutputOption(TubeBuilder.Output) - Method in interface nxopen.features.TubeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOutputOption(DraftAnalysisBuilder.SelectOutput) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setOutputOptions(EvaluationResultType[]) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
Sets the output options
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setOutputOvertravel(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setOutputPath(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Sets the output path.
- setOutputPDF(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setOutputPercentFeedback(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setOutputPlane(boolean) - Method in interface nxopen.cam.Cutcom
-
License requirements: cam_base ("CAM BASE")
.
- setOutputPoints(boolean) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOutputQuantity(Result.Quantity) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
The output quantity
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOutputRequest(ModelingObjectPropertyTable) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- setOutputRequest(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.ModalResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setOutputRequestObject(ModelingObjectPropertyTable) - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
Set the output request.
- setOutputResultType(ResultsManipulationBuilder.OutputResultType) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
The result output type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setOutputSameSheet(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setOutputState(ConvertToFromReferenceBuilder.OutputType) - Method in interface nxopen.ConvertToFromReferenceBuilder
-
License requirements: None.
- setOutputState(int) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOutputStop(boolean) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOutputSurfaceOption(SilhouetteFlangeBuilder.OutputSurfaceOptions) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setOutputText(CGMBuilder.OutputTextOption) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setOutputText(PrintPDFBuilder.OutputTextOption) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setOutputTo(DxfdwgCreator.OutputToOption) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setOutputTo(NXTo2dCreator.OutputToOption) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setOutputTolerance(boolean) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
License requirements: None.
- setOutputToolOffset(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setOutputType(FluidDomainBuilder.OutputOptionsType) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setOutputType(ArcOutputTypeCiBuilder.OutputTypes) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOutputType(CleanupOutput.GeomTypes) - Method in interface nxopen.cam.CleanupOutput
-
License requirements: cam_base ("CAM BASE")
.
- setOutputType(WedmArcOutputTypeCiBuilder.OutputTypes) - Method in interface nxopen.cam.WedmArcOutputTypeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOutputType(ConvertFacetBodyBuilder.OutputTypes) - Method in interface nxopen.facet.ConvertFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOutputType(FacetBodyFromBodyBuilder.OutputTypes) - Method in interface nxopen.facet.FacetBodyFromBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setOutputType(ProfileListBuilder.OutputTypes) - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setOutputType(ControlOutputBuilder.ControlOutputType) - Method in interface nxopen.motion.ControlOutputBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setOutputType(STLCreator.OutputTypeEnum) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setOutputType(OutputType) - Method in interface nxopen.weld.GrooveBuilder
-
- setOutputType(WeldBeadBuilder.OutputTypes) - Method in interface nxopen.weld.WeldBeadBuilder
-
License requirements: ugweld ("UG WELD")
.
- setOutputType(OutputType) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the output type.
- setOutputTypeAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setOutputTypeName(String) - Method in interface nxopen.cam.MapFeatureTeaching
-
Sets the selected output type name
License requirements: fbm_author ("FBM Author")
.
- setOutputUnit(PitchSetting.OutputUnitTypes) - Method in interface nxopen.cam.PitchSetting
-
License requirements: cam_base ("CAM BASE")
.
- setOutputUnits(FreeBodyResultsBuilder.OutputUnits) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
Output Units
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setOutputUpperTolerance(boolean) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
License requirements: None.
- setOutputWorkOffset(boolean) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setOutputWorkOffset(boolean) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setOuttol(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setOuttol(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setOuttol(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOuttol(double) - Method in interface nxopen.cam.WedmCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setOutTolerance(double) - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setOutTolerance(double) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setOutWallThickness(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setOverallTranslucency(int) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setOverbendAngle(double) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOverbendAngle(double) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setOverbendOption(BendOperationBuilder.OverbendOptions) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOverbendRadius(double) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setOverconstrainedColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch overconstrained color
License requirements: None.
- setOvercutColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOvercutOperation(ScrapDesignBuilder.OvercutType) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOvercutPosition(Point3d) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Sets the overcut position, it determines where the overcut sketch will be constrained
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOverflowBehavior(OverflowBehavior) - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
License requirements: None.
- setOverflowColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setOverflowOption(FaceBlendBuilder.OverflowMethod) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOverhang(double) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOverlapAngle(double) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setOverlapColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOverlapDefinedByNumberOfLayers(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
Sets wrapped overstock is to be defined by number of layers
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setOverlapDelta(JointFrictionAdams.FrictionOverlapDelta) - Method in interface nxopen.motion.JointFrictionAdams
-
Sets the overlap delta
License requirements: mechanisms ("MECHANISMS")
.
- setOverlapDelta(JointFrictionRecurDyn.FrictionOverlapDelta) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the overlap delta
License requirements: mechanisms ("MECHANISMS")
.
- setOverlapDistance(double) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setOverlapDistance(double) - Method in interface nxopen.cam.OutputUncutRegions
-
License requirements: cam_base ("CAM BASE")
.
- setOverlapOption(EdgeBlendBuilder.Overlap) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOverlappingColor(NXColor) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
License requirements: None.
- setOverlappingEntities(boolean) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setOverlappingEntities(boolean) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setOverlapTextAndVector(boolean) - Method in interface nxopen.cae.xyplot.VectorStyle2DSetting
-
License requirements: None.
- setOverlapType(NcmHoleMachining.OverlapTypes) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setOverlapWidth(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOverlayColor(NXColor) - Method in interface nxopen.drawings.VisualDrawingComparePrefsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOverlayDataToUse(VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsOverlayDataToUse) - Method in interface nxopen.drawings.VisualDrawingComparePrefsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOverriddenDimensionText(String[]) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Sets the overridden dimension text value
License requirements: None.
- setOverride(DesignRuleOverride) - Method in interface nxopen.routing.DesignRuleViolation
-
Sets the override object for the violation is inquired
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setOverrideColor(boolean) - Method in interface nxopen.assemblies.ProductOutlineBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setOverrideDimensionText(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: None.
- setOverrideExistingExpressions(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setOverrideFolder(String) - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setOverrideHiddenWireframeColor(int) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the hidden wireframe override color.
- setOverrideHiddenWireframeColor(int) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the hidden wireframe override color.
- setOverrideMaterial(boolean) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setOverrideOptionValue(DesignRuleViolationViewer.OverrideOption) - Method in interface nxopen.routing.DesignRuleViolationViewer
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setOverrideProperty(String, boolean) - Method in interface nxopen.cae.MeshCollectorOccurrenceBuilder
-
Update-create or delete the passed in override based on the updateThisOverride flag
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setOverrideReason(String) - Method in interface nxopen.routing.PortConnection
-
Sets the reason why a port connection's validity was overridden.
- setOverrideText(String[]) - Method in interface nxopen.routing.DesignRuleViolationViewer
-
Sets the text for reason of overriding the violation
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setOverrideToolSet(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the override tool set toggle value.
- setOverrideVisibleThreadColor(int) - Method in interface nxopen.drawings.ThreadsViewStyle
-
Sets the visible thread override color.
- setOverrideVisibleThreadColor(NXColor) - Method in interface nxopen.drawings.ViewStyleThreadsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setOverrideVisibleThreadColor(int) - Method in interface nxopen.preferences.ThreadsViewPreferences
-
Sets the visible thread override color.
- setOverrideVisibleWireframeColor(int) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the visible wireframe override color.
- setOverrideVisibleWireframeColor(int) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the visible wireframe override color.
- setOverrideWithSmoothConnections(boolean) - Method in interface nxopen.cam.NcmSmoothingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setOverstockRoundingMethod(LayoutLengthOptions.RoundingMethod) - Method in interface nxopen.formboard.LayoutLengthOptions
-
License requirements: routing_harness ("Routing Harness")
.
- setOverstockSettings(PathStockBuilder) - Method in interface nxopen.routing.FittingOverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setOvertravel(double) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setOverwriteCollectors(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setOverwriteExistingFile(boolean) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setOverwriteLamProps(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setOverwriteMaterials(boolean) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setOverwriteMaterials(boolean) - Method in interface nxopen.cae.LaminateImportZonesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setOwner(String) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the owner of AFU Header Id
License requirements: None.
- setOwner(SheetElement) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setOwner(NXObject) - Method in interface nxopen.layout2d.NewComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setOwner(SystemObject) - Method in interface nxopen.mechatronics.ElectricalPartBuilder
-
Set the owner system object.
- setOwner(String, String) - Method in interface nxopen.uf.UFClone
-
- setOwningBody(Body) - Method in interface nxopen.geometricutilities.RegionTracker
-
The owning body where the region is located onto
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setOwningObject(NXObject) - Method in interface nxopen.GroupBuilder
-
License requirements: None.
- setOwningPart(String) - Method in interface nxopen.pdm.CAEFileContainer
-
- setOwningPositioningTask(PositioningTask) - Method in interface nxopen.assemblies.PositioningGroupBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setOwningRun(Run) - Method in interface nxopen.pid.PipeBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setOwningSheet(Sheet) - Method in interface nxopen.ame.TeeJunctionBuilder
-
Set TeeJunction's owning sheet
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setOwningSheet(Sheet) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Set the owning sheet when the sheet element is created.
- setOwningSheet(Sheet) - Method in interface nxopen.diagramming.SheetElementBuilder
-
Set the owning sheet when the sheet element is created.
- setOwningSheet(Sheet) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setOwningSheet(Sheet) - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setOwningSheet(Sheet) - Method in interface nxopen.pid.PipeBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setOwningSheet(Sheet) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setOwningSubset(Subset) - Method in interface nxopen.assemblies.PositioningTaskBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setOwningSubsetInstance(Subset) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setPackedColumns(boolean) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setPadAttributes(String, String, int) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the pad attributes, note existance of attributes depends on usage in
main feature.
- setPadAttributes(String, String, int) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the pad attributes, note existance of attributes depends on usage in
main feature.
- setPadAttributes(String, String, int) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the pad attributes, note existance of attributes depends on usage in
main feature.
- setPadAttributes(String, String, int) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the pad attributes, note existance of attributes depends on usage in
main feature.
- setPadAttributes(String, String, int) - Method in interface nxopen.die.PadChildBuilder
-
Sets the pad attributes, note existance of attributes depends on usage in
main feature.
- setPadAttributes(String, String, int) - Method in interface nxopen.die.PadParentBuilder
-
Sets the pad attributes, note existance of attributes depends on usage in
main feature.
- setPadAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Sets the pad attributes, note existance of attributes depends on usage in
main feature
License requirements: ug_die_design ("Die Design")
.
- setPadAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Sets the pad attributes, note existance of attributes depends on usage in
main feature
License requirements: ug_die_design ("Die Design")
.
- setPadDiameter(double) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the pad diameter of the die hole.
- setPadDiameter(double) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the pad diameter of die holes.
- setPadHeight(double) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the pad height of the die hole.
- setPadHeight(double) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the pad height of die holes.
- setPadHeight(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the pad height of the keyway.
- setPadHeight(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the pad height of keyways.
- setPadWidth(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the pad width of the keyway.
- setPadWidth(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the pad width of keyways.
- setPageIncrement(double) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setPageIncrement(double) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setPageIncrement(double) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setPageIncrement(double) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setPageIncrement(double) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setPageIncrement(double) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setPageIncrement(double) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setPageName(String) - Method in interface nxopen.ame.PageBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPageOrientation(InspectionGraphicalReportOutputBuilder.PageOrientationType) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPageOrientation(WorkInstructionOutputBuilder.PageOrientationType) - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setPagesAutomaticallyFlyOut(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the pages automatically fly outflag
License requirements: None.
- setPageSize(InspectionGraphicalReportOutputBuilder.PageSizeType) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPageSize(WorkInstructionOutputBuilder.PageSizeType) - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setPaintBrushColor(double[]) - Method in interface nxopen.facet.PaintBrushBuilder
-
Sets the paint brush color
License requirements: None.
- setPaintBrushColor(double[]) - Method in interface nxopen.facet.PaintFacetBodyBuilder
-
Sets the paint brush color
License requirements: None.
- setPairClearZone(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFClear
-
- setPairExclusion(Tag, Tag, Tag, String) - Method in interface nxopen.uf.UFClear
-
- setPairInclusion(Tag, Tag, Tag, String) - Method in interface nxopen.uf.UFClear
-
- setPairingMethod(NodalPairingMethod) - Method in interface nxopen.cae.connections.INodalTargetsPairing
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPairingStrategy(MidSurfaceByFacePairsBuilder.PairingStrategyType) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPaper(PrintBuilder.PaperSize) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setParallaxFactor(int) - Method in interface nxopen.preferences.SessionVisualizationSpecialEffects
-
Sets the parallax factor.
- setParallel(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setParallel(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setParallel2dComponentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setParallelEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setParallelEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setParallelismTolerance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Parallelism Tolerance
License requirements: ugweld ("UG WELD")
.
- setParallelReferenceObject(Direction) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setParallelReinforcement(PathStockBuilder) - Method in interface nxopen.routing.DuctReinforcementBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setParallelSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setParallelToScreen(boolean) - Method in interface nxopen.annotations.Annotation
-
Sets the PMI parallel to screen setting
License requirements: geometric_tol ("GDT")
.
- setParallelToScreen(boolean, Annotation[]) - Method in interface nxopen.annotations.AnnotationManager
-
Sets the parallel to screen status on each input annotation.
- setParallelToScreen(boolean) - Method in interface nxopen.annotations.DisplayStyleBuilder
-
License requirements: geometric_tol ("GDT")
.
- setParallelToScreen(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the parallel to screen option
License requirements: None.
- setParallelToScreenEnabledPmiTypes(PmiPreferences.PreferenceSymbolTypes[]) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setParameter(NXObject, double, NXObject) - Method in interface nxopen.cam.PreprocessGeometryBuilder
-
Set tolerance and vector for facet body which is gotten from relevant solid body
License requirements: None.
- setParameter(double) - Method in interface nxopen.geometricutilities.DraftPointData
-
Sets the point coordinates
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setParameter(String) - Method in interface nxopen.geometricutilities.LawBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setParameter(String) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setParameter(UFVariant, String, String, UFSim.UnitType, double) - Method in interface nxopen.uf.UFSim
-
- setParameterActive(String, boolean) - Method in interface nxopen.cam.Cycle
-
To Set if parameter is active
License requirements: cam_base ("CAM BASE")
.
- setParameterActive(boolean) - Method in interface nxopen.cam.UdeParameter
-
License requirements: cam_base ("CAM BASE")
.
- setParameterData(FunctionObjectBuilder.ParameterData[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Sets the parameter data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParameterData(LogicObjectBuilder.ParameterData[]) - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
Sets the parameter data.
- setParameterData(SensorsActuatorsListBuilder.ParameterData[]) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder
-
Sets all parameter data.
- setParameterData(SignalAdapterBuilder.ParameterData[]) - Method in interface nxopen.mechatronics.SignalAdapterBuilder
-
Sets all parameter data.
- setParameterDirection(IFormBuilder.ParameterDirectionOptions) - Method in interface nxopen.features.IFormBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setParameterLength(double) - Method in interface nxopen.geometricutilities.SpinePointData
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setParameterName(String) - Method in interface nxopen.display.IrayPlusMaterialAttribute
-
License requirements: None.
- setParameterName(String) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParameterName(String) - Method in interface nxopen.tooling.SpreadsheetDataParameter
-
License requirements: None.
- setParameterObject(DurSpecialistParameterObject) - Method in interface nxopen.cae.DurSpecialistSimulationObject
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setParameterPercent(double) - Method in interface nxopen.geometricutilities.SpinePointData
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setParameterPhysics(NXObject) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParameterRuleType(PlcRule.Type) - Method in interface nxopen.ame.OperatorRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setParameters(double, Point3d, double, double, NXMatrix) - Method in interface nxopen.Arc
-
Sets the center, radius, start and end angles, and orientation
matrix of the arc.
- setParameters(double, Point3d, double, double) - Method in interface nxopen.Arc
-
Sets the center, radius, and start and end angles of the arc.
- setParameters(ResultParameters) - Method in interface nxopen.cae.ResultAccess
-
- setParameters(String[]) - Method in interface nxopen.cae.SimLoadRecipeMapEntry
-
- setParameters(Point3d, Point3d, Point3d, double) - Method in interface nxopen.Conic
-
Sets the start, end, anchor, rho of the conic.
- setParameters(double, double, double, double, DrawingSheet.Unit, DrawingSheet.ProjectionAngleType) - Method in interface nxopen.drawings.DrawingSheet
-
Sets the parameters of the drawing sheet.
- setParameters(double, double, double, double, double, Point3d) - Method in interface nxopen.Ellipse
-
Sets the parameters of the ellipse - the major/minor radii, start/end angles and the centre of the ellipse.
- setParameters(FacetingParameters) - Method in interface nxopen.facet.FacetedBody
-
Set the faceted body parameters, it will retessellate the body with the new parameters
License requirements: None.
- setParameters(double[]) - Method in interface nxopen.features.StudioSplineBuilder
-
- setParameters(double[]) - Method in interface nxopen.features.StudioSplineBuilderEx
-
Sets the optional parameters at defining points for a through point spline
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setParameters(String[], String[]) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Set the parameter number, names and values in the tree list into builder attribute.
- setParameters(String[], String[]) - Method in interface nxopen.tooling.DieDesignSettingBuilder
-
Set the parameter number, names and values in the tree list into builder attribute.
- setParametersData(MeshParameterData) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setParametersInUserControl(boolean) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setParameterSpaceFactor(double) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
Sets the parameter space factor, which defines the horizontal space between parameters.
- setParameterStatus(String, int, boolean) - Method in interface nxopen.tooling.SpreadsheetData
-
Sets the Lock/Hide or other status of spreadsheet parameter.
- setParameterStatus(int) - Method in interface nxopen.tooling.SpreadsheetDataParameter
-
License requirements: None.
- setParameterText(String) - Method in interface nxopen.ame.CallMethodRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setParameterText(String) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setParameterTreeData(SpreadsheetData) - Method in interface nxopen.tooling.MoldFillingBuilder
-
Sets spreadsheet data.
- setParameterTreeData(SpreadsheetData) - Method in interface nxopen.tooling.RunnerBuilder
-
Sets spreadsheet data.
- setParameterUsed(boolean) - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder
-
License requirements: None.
- setParameterValue(String) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParameterValue(String) - Method in interface nxopen.tooling.SpreadsheetDataParameter
-
License requirements: None.
- setParametricPlaneMap(SpatialMap.ParametricPlaneMapEnum) - Method in interface nxopen.fields.SpatialMapBuilder
-
License requirements: None.
- setParamId(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParams(Tag, UFPatt.Switch, UFPatt.Switch, UFPatt.Switch) - Method in interface nxopen.uf.UFPatt
-
- setParamToggle(UFVariant, String, UFUde.ParamToggle) - Method in interface nxopen.uf.UFUde
-
- setParantheses(BaseSurfaceFinishBuilder.ParanthesesType) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
- setParantheses(BaseSurfaceFinishBuilder.ParanthesesType) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
- setParent(PartSymbolFolder) - Method in interface nxopen.annotations.PartSymbolFolderBuilder
-
Sets parent of current folder provided current folder is not root folder
License requirements: drafting ("DRAFTING")
.
- setParent(CAMObject) - Method in interface nxopen.cam.InspectionMoveBuilder
-
Set parent
License requirements: None.
- setParent(CAMObject) - Method in interface nxopen.cam.MoveBuilder
-
Set parent
License requirements: None.
- setParent(ExpressionGroup) - Method in interface nxopen.ExpressionGroup
-
Sets an expression group's parent group or null
License requirements: None.
- setParent(ShipPreparationInfo) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setParent(LocalDefinitionFolder) - Method in interface nxopen.layout2d.LocalDefinitionFolderBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setParent(NXObject) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParent(NXObject) - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParent(SpecialFormingBuilder.ParentValue) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentAssociativity(boolean) - Method in interface nxopen.features.BlockFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setParentAssociativity(boolean) - Method in interface nxopen.features.ConeBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setParentAssociativity(boolean) - Method in interface nxopen.features.CylinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setParentAssociativity(boolean) - Method in interface nxopen.features.SphereBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setParentDuct(Stock) - Method in interface nxopen.routing.WindCatcherBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setParentFeatureInternal(Feature) - Method in interface nxopen.features.FeatureBuilder
-
Set the parent features which would be internal or slaves to the feature
being created or commited
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setParentFeatureInternal(boolean) - Method in interface nxopen.features.FeatureBuilder
-
Sets whether or not the latest timestamped parent feature of this feature
should be made internal
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setParentFunction(NXObject) - Method in interface nxopen.mechatronics.RequirementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParentheses(BaseSurfaceFinishBuilder.ParenthesesType) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setParentheses(BaseSurfaceFinishBuilder.ParenthesesType) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setParentID(String) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParentId(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setParentLabelPrefix(String) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setParentNode(BendInsertDesignBuilder.ParentOption) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentNode(DieBaseBuilder.ParentNodeOpt) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setParentNode(ShimBuilder.ParentOption) - Method in interface nxopen.tooling.ShimBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentNode(SmartScrewUpdateBuilder.ParentOption) - Method in interface nxopen.tooling.SmartScrewUpdateBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentOption(CopyPasteBuilder.ParentTransferOption) - Method in interface nxopen.features.CopyPasteBuilder
-
- setParentPart(CompositeCurveBuilder.PartType) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setParentPart(ExtractFaceBuilder.ParentPartType) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setParentPart(WaveDatumBuilder.ParentPartType) - Method in interface nxopen.features.WaveDatumBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setParentPart(WavePointBuilder.ParentPartType) - Method in interface nxopen.features.WavePointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setParentPart(WaveSketchBuilder.ParentPartType) - Method in interface nxopen.features.WaveSketchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setParentPart(Part) - Method in interface nxopen.LinkedMirrorPartBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setParentPart(Part) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the parent part, this is mainly used to set context work part of a reusable component
License requirements: None.
- setParentPart(BurringInsertBuilder.ParentTypes) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentPart(FormingInsertBuilder.ParentTypes) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setParentPart(GeneralInsertBuilder.ParentOption) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentPart(SpecialPiercingInsertBuilder.ParentPartTypes) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentPartName(String) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentPartName(String) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentPartName(String) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setParentPartName(String) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: None.
- setParentPartName(String) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: None.
- setParentPartName(String) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setParentPartName(String) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentPartName(String) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setParentPartName(String) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: None.
- setParentPartName(String) - Method in interface nxopen.tooling.ShimBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setParentPartName(String) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: None.
- setParentPartType(MirrorBodyBuilder.ParentPart) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setParentPlane(Plane) - Method in interface nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setParentRequirement(Requirement) - Method in interface nxopen.validate.RequirementCheck
-
License requirements: None.
- setParentSegmentOfEccentricSegment(ISegment) - Method in interface nxopen.routing.LinearPathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setParentSmBody(Body) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setParentSpine(Section) - Method in interface nxopen.geometricutilities.SpinePointData
-
Sets the parent spine on which spine point is defined
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setPart(Part) - Method in interface nxopen.drafting.DrawingAutomationWizard
-
Sets the part from which the booklet drawings are created
License requirements: None.
- setPart(Part) - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder
-
License requirements: None.
- setPart(Part) - Method in interface nxopen.drawings.StandardViewsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setPart(Part) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPart(Part) - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPartAxisPoint(Point) - Method in interface nxopen.cam.MultiBladeGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartAxisPoint(Point) - Method in interface nxopen.cam.PartAxisBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartAxisPoint(Point) - Method in interface nxopen.cam.RotaryFinishGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartAxisVector(SmartObject) - Method in interface nxopen.cam.MultiBladeGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartAxisVector(SmartObject) - Method in interface nxopen.cam.PartAxisBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartAxisVector(SmartObject) - Method in interface nxopen.cam.RotaryFinishGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartCategory(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setPartColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setPartContext() - Method in interface nxopen.fields.Field
-
Set part context.
- setPartCreation(PreviewPropertiesBuilder.PartCreationOptions) - Method in interface nxopen.PreviewPropertiesBuilder
-
License requirements: None.
- setPartCreationType(StandardPartFrameworkBuilder.CreationType) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setPartCset(Tag, String) - Method in interface nxopen.uf.UFWeight
-
- setPartDefinition(ElectricalPartDefinitionShadow) - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Sets part definition.
- setPartDirectory(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPartFamilyInstanceSelectionCriteria(InstanceSelectionCriteria) - Method in interface nxopen.assemblies.Component
-
Hooks
InstanceSelectionCriteria
to this component
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- setPartFamilyInstanceSelectionCriteria(FamilyAttribute[], String[]) - Method in interface nxopen.partfamily.InstanceSelectionCriteria
-
- setPartFamilyInstanceSelectionCriteria(String) - Method in interface nxopen.partfamily.InstanceSelectionCriteria
-
- setPartFile(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setPartFile(String) - Method in interface nxopen.tooling.ReusableObject
-
License requirements: None.
- setPartFileName(String) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPartFileName(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setPartFolderBrowser(String) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setPartFolderBrowser(String) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setPartialHoleAngle(double) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPartiallyControlledNoteTitle(String) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPartiallyDefinedColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch partially defined constraint color
License requirements: None.
- setPartiallyShaded(boolean) - Method in interface nxopen.DisplayModification
-
Sets the partial shading flag.
- setPartiallyShaded(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setPartiallyShaded(boolean) - Method in interface nxopen.preferences.PartObject
-
Sets the partially shaded flag for Solid and Sheets
License requirements: None.
- setPartiallyShaded(Tag, boolean) - Method in interface nxopen.uf.UFObj
-
- setPartialMatch(int) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setPartialOption(boolean) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPartialRibHeight(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setPartialSphereOption(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setPartialSphereOption(boolean) - Method in interface nxopen.motion.BodyContactSphereToCAD
-
License requirements: mechanisms ("MECHANISMS")
.
- setPartialSphereVector(Direction) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setPartialSphereVector(Direction) - Method in interface nxopen.motion.BodyContactSphereToCAD
-
License requirements: mechanisms ("MECHANISMS")
.
- setParticipatingDatumColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch participating datum curve color
License requirements: None.
- setPartIdentifier(String) - Method in interface nxopen.annotations.PartIdentificationBuilder
-
License requirements: None.
- setPartingColor(NXColor) - Method in interface nxopen.tooling.AssignPatchBuilder
-
License requirements: None.
- setPartingManagerDataStatus(int) - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Set the status of the parting manager data.
- setPartInStock(Tag) - Method in interface nxopen.uf.UFRoute
-
- setPartitionSearchTermLogic(SearchTerm.SearchTermLogicType, PartitionSearchTerm.IncludeChildren, SearchTerm[]) - Method in interface nxopen.assemblies.SubsetRecipe
-
- setPartitionViewStyle(Subset.PartitionViewStyleType) - Method in interface nxopen.assemblies.Subset
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setPartLayer(int) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The method that sets the layer used for newly replaced objects
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setPartListCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setPartLoadOption(LoadOptions.LoadOption) - Method in interface nxopen.LoadOptions
-
Sets the option that controls how the part is being loaded
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setPartMaterial(String) - Method in interface nxopen.cam.CAMSetup
-
Part material
License requirements: cam_base ("CAM BASE")
.
- setPartMaterial(String) - Method in interface nxopen.tooling.DefineNeutralFactorBuilder
-
License requirements: None.
- setPartMaterialBuilder(NXObject) - Method in interface nxopen.cam.FeatureGeomBuilder
-
- setPartMatStr(String) - Method in interface nxopen.tooling.InitProjBuilder
-
License requirements: None.
- setPartMaxWeight(Tag, double, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight
-
- setPartMinWeight(Tag, double, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight
-
- setPartMountJunction(CartesianCoordinateSystem) - Method in interface nxopen.cam.NcmctPartMountingBuilder
-
License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPartName(String) - Method in interface nxopen.annotations.MasterCustomSymbolData
-
- setPartName(String) - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPartName(String) - Method in interface nxopen.layout2d.ComponentNameBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPartName(String) - Method in interface nxopen.routing.ChoosePartPluginData
-
Sets the Part Name of the part choosen by the user.
- setPartName(String) - Method in interface nxopen.routing.SingleDevice
-
Sets the part name
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setPartName(String) - Method in interface nxopen.tooling.ClonePart
-
License requirements: None.
- setPartNameAttribute(String) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the part name attribute
License requirements: None.
- setPartNameDesc(Tag, String, String) - Method in interface nxopen.uf.UFUgmgr
-
- setPartNameStyle(SessionAssemblies.PartNameOption) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the part name style
License requirements: None.
- setPartNo(int) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setPartNumber(String) - Method in interface nxopen.mechatronics.ElectricalPartBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPartNumber(String) - Method in interface nxopen.routing.ChoosePartPluginData
-
Sets the Part Number of the part choosen by the user.
- setPartNumber(String) - Method in interface nxopen.routing.SingleDevice
-
Sets the part number
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setPartObject(Part) - Method in interface nxopen.validate.PartNode
-
License requirements: None.
- setPartOccurrence(Component) - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setPartOffDepthMode(RoughTurningBuilder.PartOffDepthModeTypes) - Method in interface nxopen.cam.RoughTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartOffDepthValue(double) - Method in interface nxopen.cam.RoughTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartOffPositionMode(RoughTurningBuilder.PartOffPositionModeTypes) - Method in interface nxopen.cam.RoughTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartOffPositionPoint(Point) - Method in interface nxopen.cam.RoughTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPartOffset(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setPartOperationBuilder(PartOperationCreateBuilder) - Method in interface nxopen.layout2d.ComponentNameBuilder
-
- setPartOperationCreateBuilder(PartOperationCreateBuilder) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
- setPartOperationCreateBuilder(PartOperationCreateBuilder) - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
- setPartOperationCreateBuilder(PartOperationBuilder) - Method in interface nxopen.FileNew
-
- setPartPreviewMode(BasePart.PartPreview) - Method in interface nxopen.BasePart
-
Sets the preview mode
License requirements: None.
- setPartReferenceSet(String) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The method that sets the reference set used for newly replaced objects
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setPartRefSet(Tag, String) - Method in interface nxopen.uf.UFWeight
-
- setParts(Component[]) - Method in interface nxopen.routing.PathStockBuilder
-
- setPartsAmout(int) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setPartSaveOption(Tag, boolean) - Method in interface nxopen.uf.UFWeight
-
- setPartSearchPath(Tag) - Method in interface nxopen.uf.UFRoute
-
- setPartSelection(Preferences.PartSelectionTypes) - Method in interface nxopen.cam.Preferences
-
- setPartSpecToOpen(String) - Method in interface nxopen.pdm.PartOperationCreateBuilder
-
- setPartsToAdd(BasePart[]) - Method in interface nxopen.assemblies.AddComponentBuilder
-
Sets the parts to be used for adding components
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setPartsToCleanup(PartCleanup.CleanupParts) - Method in interface nxopen.PartCleanup
-
- setPartsToRename(BasePart[]) - Method in interface nxopen.pdm.PartOperationCreateBuilder
-
Sets the Parts To Rename on the Builder.
- setPartSubType(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setPartSymbol(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPartSymbol(boolean) - Method in interface nxopen.annotations.ImportSymbolBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setPartSymbol(boolean) - Method in interface nxopen.annotations.ReplaceSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPartSymbol(boolean) - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setPartThickReal(double) - Method in interface nxopen.tooling.InitProjBuilder
-
License requirements: None.
- setPartToUse(BasePart) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setPartType(OnestepUnformBuilder.Part) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setPartType(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setPartType(int) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setPartTypeFlag(RouteManager.PartType) - Method in interface nxopen.routing.RouteManager
-
License requirements: routing_base ("Routing Basic")
.
- setPartUnitsEnum(ASCImporter.Units) - Method in interface nxopen.ASCImporter
-
License requirements: nx_layout ("NX Layout")
.
- setPartUnitStr(String) - Method in interface nxopen.tooling.InitProjBuilder
-
License requirements: None.
- setPartVolume(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setPartVolume(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setPass(int) - Method in interface nxopen.cam.InPathEventDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPassengerSideStandard(MirrorCertificationBuilder.PassengerSideStandardsType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPassword(boolean) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setPassword(Part, String, String, String, String) - Method in interface nxopen.PartCollection
-
- setPassword(Part, String, String, String, String, PartCollection.SetProtectionOn) - Method in interface nxopen.PartCollection
-
This method is for setting a new password for a part.
- setPasteMethod(ReusableObjectPasteBuilder.PasteMethods) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setPasteOption(boolean) - Method in interface nxopen.features.AdmMoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPasteOption(PasteFaceBuilder.PasteOptionType) - Method in interface nxopen.features.PasteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPasteType(CutCopyPasteBuilder.TypePaste) - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
License requirements: None.
- setPatch(boolean) - Method in interface nxopen.features.FillHoleBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.
- setPatch(boolean) - Method in interface nxopen.features.FlowBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPatch(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setPatchColor(NXColor) - Method in interface nxopen.tooling.AssignPatchBuilder
-
License requirements: None.
- setPatchColor(double, double, double) - Method in interface nxopen.tooling.AssignPatchBuilder
-
- setPatchComplexGeometryAreas(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPatchSolutionFlag(boolean) - Method in interface nxopen.features.FeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPatchSurface(boolean) - Method in interface nxopen.tooling.EdgePatchBuilder
-
License requirements: None.
- setPatchSurfaceFilename(String) - Method in interface nxopen.features.FeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPatchType(ThroughCurvesBuilder.PatchTypes) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setPatchType(SolidPatchBuilder.SolidPatchType) - Method in interface nxopen.tooling.SolidPatchBuilder
-
License requirements: None.
- setPath(String) - Method in interface nxopen.ame.TiaProjectItemBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPath(String) - Method in interface nxopen.annotations.MasterCustomSymbolData
-
- setPath(String) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Setting Path retrieved from Global method at builder side
License requirements: drafting ("DRAFTING")
.
- setPath(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setPath(String) - Method in interface nxopen.blockstyler.FileSelection
-
License requirements: None.
- setPath(String) - Method in interface nxopen.blockstyler.FolderSelection
-
License requirements: None.
- setPath(TaggedObject) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setPath(String) - Method in interface nxopen.cae.SimLoadRecipeSource
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPath(Curve) - Method in interface nxopen.die.DieLimitsBuilder
-
Set the path used for the limits.
- setPath(Section) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPath(String) - Method in interface nxopen.layout2d.DefineComponentBuilder
-
Sets the path to store the 2D Component
License requirements: nx_layout ("NX Layout")
.
- setPath(String) - Method in interface nxopen.layout2d.InsertComponentBuilder
-
Sets the path of the reuse library for the 2D Component
License requirements: nx_layout ("NX Layout")
.
- setPath(String) - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder
-
Sets the path to store the 2D Component
License requirements: nx_layout ("NX Layout")
.
- setPath(String) - Method in interface nxopen.layout2d.ReplaceComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setPathAdjustmentAngleDirection(FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions) - Method in interface nxopen.features.sheetmetal.FlexibleCableSegment
-
Sets the path adjustment angle direction.
- setPathArrangementOrigin(Point3d) - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
Sets a new origin for the point on the harness path.
- setPathBrowser(String) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setPathCurvesFromCurves(NXObject[]) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
Set the path curves that constrain the movement of the attachment
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPathDatatype(RoadBuilder.PathDatatypeChoices) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setPathDisplayType(DisplayPath.PathDisplayTypes) - Method in interface nxopen.cam.DisplayPath
-
License requirements: cam_base ("CAM BASE")
.
- setPathDisplayType(OperationDisplayOptionsBuilder.PathDisplayTypes) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPathFeature(CAMObject, String) - Method in interface nxopen.cam.InspectionOperationCollection
-
Sets the Inspection Feature referenced in an Inspection Path.
- setPathFileName(String) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setPathForwardThroughExtensionVector(boolean) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setPathFrame(CoordinateSystem) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPathId(int) - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setPathInLib(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setPathLengthAnnotationEndPoints(Point, Point) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Create and initialize the Path Length Annotation
License requirements: routing_harness ("Routing Harness")
.
- setPathLengthMultiplier(String) - Method in interface nxopen.routing.electrical.Connection
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setPathLengthOffset(String) - Method in interface nxopen.routing.electrical.Connection
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setPathLocation(double) - Method in interface nxopen.geometricutilities.SecondarySectionData
-
Path Location
License requirements: None.
- setPathName(String) - Method in interface nxopen.geometricutilities.PointsFromFileBuilder
-
License requirements: None.
- setPathName(String) - Method in interface nxopen.tooling.InitProjectBuilder
-
License requirements: None.
- setPathNormalType(OperationDisplayOptionsBuilder.PathNormalTypes) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPathObjects(NXObject[]) - Method in interface nxopen.die.DieLimitsBuilder
-
Set the objects used to create the path.
- setPathOpName(String) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPathOrderEnum(InspectionLinkPmiBuilder.PathOrderTypes) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPathParameter(double) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPathPositionType(CloseRangeVisibilityBuilder.PathPositionTypes) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPathPreview(boolean) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPathReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setPathReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setPathStockBuilder(PathStockBuilder) - Method in interface nxopen.routing.LinearPathBuilder
-
Sets the builder for assigning stock to the new path.
- setPathType(PathConstraintJointBuilder.PathTypes) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPathVector(Direction) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPattern(String) - Method in interface nxopen.annotations.HatchBuilder
-
- setPattern(String) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPattern(DurSpecialistBlockLoadEventBuilder.PatternType) - Method in interface nxopen.cae.DurSpecialistBlockLoadEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPattern(String) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPattern(MultiRamp.Types) - Method in interface nxopen.cam.MultiRamp
-
License requirements: cam_base ("CAM BASE")
.
- setPatternCenterPoint(Point) - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setPatternCenterPoint(Point) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPatternCenterPoint(Point) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPatternCenterPoint(Point) - Method in interface nxopen.cam.DmSpiralBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPatternDataToSave(PartSaveOptions.PatternData) - Method in interface nxopen.PartSaveOptions
-
Sets the option indicating how pattern data will be saved while saving
a part
License requirements: None.
- setPatternDefinedBy(int) - Method in interface nxopen.annotations.LightweightSectionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setPatternDirection(AreaMillingNonSteepContainment.PatternDirectionTypes) - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setPatternDirection(FlowCutSteepContainment.PatternDirectionTypes) - Method in interface nxopen.cam.FlowCutSteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setPatternDirection(CutParametersPatternDirectionTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setPatternDisplayFrequency(int) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPatternDisplayType(OperationDisplayOptionsBuilder.PatternDisplayTypes) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPatternFeature(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setPatternFile(String) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPatternLimitsBy(PointSetBuilder.PatternLimitsType) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPatternLimitsEndPoint(Point) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPatternLimitsStartPoint(Point) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPatternMethod(PatternFeatureBuilder.PatternMethodOptions) - Method in interface nxopen.features.PatternFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPatternRepeatFactor(double) - Method in interface nxopen.display.Image
-
License requirements: None.
- setPatternRepeatFactor(double) - Method in interface nxopen.display.Wall
-
- setPatternSketch(Sketch) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setPatternSmooth(boolean) - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
License requirements: None.
- setPatternType(DurabilityLoadPatternBuilder.PatternTypeEnum) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPatternType(PatternTypeBuilder.Option) - Method in interface nxopen.cam.PatternTypeBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPatternType(PatternDefinition.PatternEnum) - Method in interface nxopen.geometricutilities.PatternDefinition
-
License requirements: None.
- setPatternXOffset(double) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPatternYOffset(double) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPatternZOffset(double) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPauseAfterDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPauseDuration(int) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the pause duration
License requirements: None.
- setPauseOnFirstGougeOrCollision(boolean) - Method in interface nxopen.cam.GougeCheckBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPauseOnGouge(boolean) - Method in interface nxopen.cam.CutDepthChecker
-
License requirements: cam_base ("CAM BASE")
.
- setPaxFileName(String) - Method in interface nxopen.diagramming.SheetBuilder
-
License requirements: None.
- setPaxFileName(String) - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPcfFileName(String) - Method in interface nxopen.mechanicalrouting.PipingComponentFileBuilder
-
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
- setPcsName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPcsName(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPcsName(String) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPdmDesc(String, String) - Method in interface nxopen.uf.UFClone
-
- setPdmName(String, String) - Method in interface nxopen.uf.UFClone
-
- setPdmReferenceAttribute(String, String) - Method in interface nxopen.NXObject
-
Sets the value of PDM Reference attribute on the object.
- setPeakValleyTolerance(double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPeakValleyTolerance(double) - Method in interface nxopen.cae.DurabilityDataControlBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPedalReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPedalReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPendulumProfile(PendulumPlacementBuilder.PendulumProfileType) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPenetrationDepth(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setPenetrationType(PenetrationRequest.PenetrationType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setPercent(boolean) - Method in interface nxopen.IPlane
-
Sets the arclenth or the percent value
License requirements: None.
- setPercentage(double) - Method in interface nxopen.cam.StopPosition
-
License requirements: cam_base ("CAM BASE")
.
- setPercentage(double) - Method in interface nxopen.cam.TurnOverlap
-
License requirements: cam_base ("CAM BASE")
.
- setPercentage(double) - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPercentageForce(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPercentageForceArray(double[]) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Sets the percentage of force.
- setPercentFeedback(double) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setPercentLowerLimit(double) - Method in interface nxopen.cam.FeedsOptimizationData
-
License requirements: cam_base ("CAM BASE")
.
- setPercentOfDegression(double) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPercentOffset(double) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPercentOffset(double) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPercentOffset(double) - Method in interface nxopen.cae.NodeProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPercentOfTool(double) - Method in interface nxopen.cam.DisplaySilhouette
-
License requirements: cam_base ("CAM BASE")
.
- setPercentOfTool(double) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPercentReduction(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPercentUpperLimit(double) - Method in interface nxopen.cam.FeedsOptimizationData
-
License requirements: cam_base ("CAM BASE")
.
- setPercentUsed(boolean) - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder
-
License requirements: None.
- setPerformExtendedIntersectionCalculation(boolean) - Method in interface nxopen.features.TrimCurve2Builder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPerformFidelityCheckOnImport(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the perform fidelity check on import flag for I-DEAS
License requirements: None.
- setPerformOrthotropicAnalysis(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPerformOrthotropicAnalysis(boolean) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPerimeter(double) - Method in interface nxopen.ame.LoadLineDesignerBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setPeriodic(boolean) - Method in interface nxopen.features.CurveOnSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPeriodic(boolean) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setPeriodic(boolean) - Method in interface nxopen.features.StudioSplineBuilder
-
- setPeriodic(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPermanentBoundary(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setPerpendicular(boolean) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setPerpendicular(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setPerpendicular(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPerpendicularBaselineDirectionReversed(boolean) - Method in interface nxopen.annotations.OrdinateBaselineBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setPerpendicularEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setPerpendicularReinforcement(PathStockBuilder) - Method in interface nxopen.routing.DuctReinforcementBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setPersistent(boolean) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setPersistent(boolean) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setPersistentInterpolator(boolean) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setPersistentTag(int) - Method in interface nxopen.mechatronics.GenericSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPersistentTag(int) - Method in interface nxopen.mechatronics.LimitSwitchBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPersistentTag(int) - Method in interface nxopen.mechatronics.RelayBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPerspective(boolean) - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Sets the status of perspective
License requirements: drafting ("DRAFTING")
.
- setPerspective(boolean) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPerspective(Tag, int, double, double) - Method in interface nxopen.uf.UFView
-
- setPerspectiveDistance(double) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setPerspectiveDistance(double) - Method in interface nxopen.drawings.PerspectiveViewStyle
-
Sets the value of perspective distance
License requirements: drafting ("DRAFTING")
.
- setPerspectiveDistance(double) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPerturbationFraction(double) - Method in interface nxopen.cae.optimization.DAOStopCondition
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPhase(double) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPhaseAngle(double) - Method in interface nxopen.cae.CrossSectionParameters
-
Sets the phase angle at which result will be evaluated.
- setPhaseAngle(double) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setPhaseAngle(double) - Method in interface nxopen.cae.responsesimulation.FunctionComponentData
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setPhaseAngle(double) - Method in interface nxopen.cae.ResultParameters
-
Sets the phase angle at which result will be evaluated.
- setPhaseAngle(double) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles
-
License requirements: None.
- setPhaseRangeOption(PhaseRangeOption) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles
-
License requirements: None.
- setPhysicalHystereticScalingFactor(double) - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setPhysicalHystereticScalingFactor(double) - Method in interface nxopen.motion.FlexPhysicalDampingSettings
-
License requirements: mechanisms ("MECHANISMS")
.
- setPhysicalMaterialPropertyValue(String, MaterialOptions) - Method in interface nxopen.cae.PropertyTable
-
- setPhysicalPropertyOffset(int) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPhysicalPropertyTable(PhysicalPropertyTable) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTable(PhysicalPropertyTable) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTable(PhysicalPropertyTable) - Method in interface nxopen.cae.DamperEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTable(PhysicalPropertyTable) - Method in interface nxopen.cae.GapEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTable(PhysicalPropertyTable) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTable(PhysicalPropertyTable) - Method in interface nxopen.cae.SpringEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTables(PhysicalPropertyTable[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set physical property tables to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPhysicalPropertyTableState(BeamEADBuilder.State) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTableState(BushingEADBuilder.State) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTableState(DamperEADBuilder.State) - Method in interface nxopen.cae.DamperEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTableState(GapEADBuilder.State) - Method in interface nxopen.cae.GapEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTableState(ShellEADBuilder.State) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalPropertyTableState(SpringEADBuilder.State) - Method in interface nxopen.cae.SpringEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPhysicalTypes(ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setPhysicalViscousScalingFactor(double) - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setPhysicalViscousScalingFactor(double) - Method in interface nxopen.motion.FlexPhysicalDampingSettings
-
License requirements: mechanisms ("MECHANISMS")
.
- setPhysics(NXObject) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPhysicsObject(NXObject) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPhysicsObject(String, int, NXObject) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder
-
Sets physics object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPickPoint(Point3d) - Method in interface nxopen.annotations.Associativity
-
Sets the pick point
License requirements: None.
- setPickPoint(Point3d) - Method in interface nxopen.features.FillHoleBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.
- setPickPoint(Point3d) - Method in interface nxopen.features.RadialDimensionBuilder
-
License requirements: None.
- setPickPointOnAttachment(Point3d) - Method in interface nxopen.features.shipdesign.BracketBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setPickPointOnReinforcement(Point3d) - Method in interface nxopen.features.shipdesign.BracketBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setPickRGBTipsColor(double[]) - Method in interface nxopen.tooldesigner.SelectGunTipsBuilder
-
Sets the pick rgbtips color
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setPickSequentially(boolean) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPID1s(TaggedObject[]) - Method in interface nxopen.cae.connections.ConnectionData
-
Set pID1s
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPID2s(TaggedObject[]) - Method in interface nxopen.cae.connections.ConnectionData
-
Set pID2s
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPID3s(TaggedObject[]) - Method in interface nxopen.cae.connections.ConnectionData
-
Set pID3s
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPids(boolean) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPieceLengthLock(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setPierceAndExtrude(boolean) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the pierce and extrude setting of the flange task.
- setPierceBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the pierce bounds of the pierce task.
- setPierceHoleDirection(ILocation) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the pierce hole direction
License requirements: ug_die_design ("Die Design")
.
- setPierceHoleLocation(ILocation[]) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the locations of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setPierceHoleShape(DirectionOption, IProfile[]) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the shape of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setPierceObjects(IProfile[]) - Method in interface nxopen.die.PierceItemBuilder
-
Sets the objects making up the hole to be pierced.
- setPierceType(FlangeTaskBuilder.PierceTypes) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the pierce type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setPierceType(ScrapDesignBuilder.DefScrapType) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPiercingColor(NXColor) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setPiercingColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPieSections(double[], int[]) - Method in interface nxopen.tooldesigner.ReusePieChartBuilder
-
Set sections vector
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setPillarDirection(Direction) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Sets the pillar direction.
- setPilotingColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPinDirection(Direction) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setPinIdentifier(String) - Method in interface nxopen.routing.TerminalPort
-
Sets the pin identifier (name) of the
TerminalPort
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- setPinned(boolean) - Method in interface nxopen.diagramming.PortBuilder
-
License requirements: None.
- setPinToScreen(boolean) - Method in interface nxopen.markup.MarkupObject
-
License requirements: None.
- setPipeSpecPathId(String) - Method in interface nxopen.plas.RunBuilder
-
License requirements: None.
- setPipingComponentFilePlugin(CustomManager.PipingComponentFilePlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will use for the Unify Path command.
- setPitch(double) - Method in interface nxopen.cam.HoleBossGeom
-
License requirements: cam_base ("CAM BASE")
.
- setPitch(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPitch(double) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setPitch(double) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setPitch(double) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPitch(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setPitch(double) - Method in interface nxopen.tooling.ReliefDesignBuilder
-
License requirements: None.
- setPitchAngle(double) - Method in interface nxopen.features.vehicledesign.HoodVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPitchResult(double) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setPitchType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setPitchValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setPivotPoint(Point) - Method in interface nxopen.features.MoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPivotPoint(Point) - Method in interface nxopen.features.StudioXformBuilder
-
- setPivotPoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPixelColorTolerance(int) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setPixelWidthOptions(boolean, double, int[]) - Method in interface nxopen.preferences.PartVisualizationLine
-
Modifies options that control width appearance in the graphics window.
- setPixelWidths(int[]) - Method in interface nxopen.preferences.PartVisualizationLine
-
Modifies pixel widths used in the graphics window.
- setPlaceDefaultElbow(boolean) - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setPlaceInProductAspect(boolean) - Method in interface nxopen.ame.ProductSelectionBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPlacement(StrainGagePlacementType) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setPlacement(IsoparametricCurvesBuilder.PlacementTypes) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlacement(SectionAnalysisExBuilder.PlacementType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setPlacementCount(int) - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setPlacementFace(ISurface) - Method in interface nxopen.features.HoleFeatureBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setPlacementFaces(DisplayableObject[]) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Sets the faces or datum that are being processed into the builder.
- setPlacementMethod(PillarBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setPlacementMethod(SteelSupportBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setPlacementOffset(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the placement offset of the keyway.
- setPlacementOffset(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the placement offset of keyways.
- setPlacementOption(MeshPointMultipleOnCurveBuilder.PlacementType) - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPlacementOption(NodesOnCurveBuilder.PlacementType) - Method in interface nxopen.cae.NodesOnCurveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPlacementOption(ViewCreationWizardBuilder.Option) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPlacementPlane(Plane) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setPlacementSide(OrientationDefinitionBuilder.PlacementSideTypes) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setPlacementType(StandardViewsBuilder.Placement) - Method in interface nxopen.drawings.StandardViewsBuilder
-
- setPlacementType(GussetBuilder.PlacementTypes) - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setPlacementType(AlongGuideCutBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setPlacementType(CornerCutBuilder.CutOption) - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setPlacementType(CustomBracketBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setPlacementType(Cutout2Builder.CreationMethod) - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setPlacementType(ShipCutoutBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setPlacementType(ShipEndCutBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setPlacementType(WeldCut2Builder.CreationMethod) - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setPlacementType(WeldCutBuilder.CreationMethod) - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setPlacementValue(InstantiateTemplateBulkBuilder.PlacementType) - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPlacePartOperation(boolean) - Method in interface nxopen.routing.PlacePartBuilder
-
Set a flag which tells the builder whether the part being placed is replacing
an existing part in the assembly.
- setPlanarityTolerance(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Planarity Tolerance
License requirements: ugweld ("UG WELD")
.
- setPlanarizeArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilder
-
- setPlanarizeArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlanarizeDirection(StudioXformBuilder.PlanarizeDirectionType) - Method in interface nxopen.features.StudioXformBuilder
-
- setPlanarizeDirection(StudioXformBuilderEx.PlanarizeDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlanarizeMethod(StudioXformBuilder.PlanarizeMethodType) - Method in interface nxopen.features.StudioXformBuilder
-
- setPlanarizeMethod(StudioXformBuilderEx.PlanarizeMethodType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlanarizePlaneOption(StudioXformBuilder.PlanarizePlaneOptionType) - Method in interface nxopen.features.StudioXformBuilder
-
- setPlanarizeProjectionPlane(StudioXformBuilderEx.PlanarizeProjectionPlaneType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlanarOffsetHeight(String) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setPlanarReflectionToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setPlanarSegmentCurveTypeDisplayData(boolean, PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveType, PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveTypeDisplayData) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the display data of a given planar segment curve type for the Flexible Printed Circuit Design application.
- setPlanarShadowToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setPlanarSurfacePreferred(boolean) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlanarTolerance(double) - Method in interface nxopen.features.ExtrudeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlane(Post.ClipPlane) - Method in interface nxopen.cae.ClippingParameters
-
Set plane
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setPlane(Plane) - Method in interface nxopen.cae.ElementReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPlane(Plane) - Method in interface nxopen.cae.NodeReflectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPlane(StrainGageOrientationPlane) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setPlane(Plane) - Method in interface nxopen.cam.BoundarySet
-
License requirements: cam_base ("CAM BASE")
.
- setPlane(Plane) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPlane(NXObject) - Method in interface nxopen.cam.LowerLimit
-
License requirements: cam_base ("CAM BASE")
.
- setPlane(Plane) - Method in interface nxopen.cam.MirrorBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPlane(SmartObject) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPlane(Plane) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPlane(Plane) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPlane(Plane) - Method in interface nxopen.die.DieLocationBuilder
-
License requirements: None.
- setPlane(ISurface) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the plane of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- setPlane(ISurface) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the plane of the die hole.
- setPlane(IOrientation) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the plane of the keyway.
- setPlane(Point3d, Point3d, Matrix3x3) - Method in interface nxopen.display.DynamicSectionBuilder
-
Sets a section plane to be the specified plane
The plane is created at the specified origin with the
specified rotation matrix.
- setPlane(Plane) - Method in interface nxopen.display.PlaneGridBuilder
-
License requirements: None.
- setPlane(Plane) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPlane(Plane) - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.
- setPlane(Plane) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlane(Plane) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setPlane(Plane) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setPlane(ISurface) - Method in interface nxopen.features.EmbossProjection
-
Sets the projection plane
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlane(ISurface) - Method in interface nxopen.features.SectionEditBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlane(Plane) - Method in interface nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setPlane(Plane) - Method in interface nxopen.features.sheetmetal.MultiFlangeBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setPlane(Plane) - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setPlane(Plane) - Method in interface nxopen.features.shipdesign.PlaneListBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setPlane(Plane) - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setPlane(Plane) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane(Plane) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlane(Plane) - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
License requirements: None.
- setPlane(Plane) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
License requirements: None.
- setPlane(SectionPlaneBuilder.PlaneType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setPlane(Plane) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlane(Plane) - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
License requirements: None.
- setPlane(Plane) - Method in interface nxopen.geometricutilities.SpinePlaneBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlane(Plane) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setPlane(Plane) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPlane1(Plane) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setPlane1(Plane) - Method in interface nxopen.features.shipdesign.PlanePairBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setPlane1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane1PointLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane1PointRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane2(Plane) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setPlane2(Plane) - Method in interface nxopen.features.shipdesign.PlanePairBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setPlane5Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane5LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane5PointLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane5PointRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane5Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlane5RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlaneAPoint(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlaneAsString(String) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setPlaneBPoint(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlaneColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Sets the plane color
License requirements: None.
- setPlaneConstrainedToggle(boolean) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setPlaneConstructor(Plane) - Method in interface nxopen.features.MirrorFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlaneCPoint(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlaneDefine(NXObject) - Method in interface nxopen.tooling.CalculateAreaBuilder
-
License requirements: None.
- setPlaneDPoint(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPlaneGridToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setPlaneHeight(double) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPlaneHelpPoint(Point) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlaneLocation(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPlaneMethod(PlaneBuilder.PlaneMethodType) - Method in interface nxopen.annotations.PlaneBuilder
-
License requirements: None.
- setPlaneMethod(ShellTemplateBuilder.PlaneLocationTypes) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setPlaneMethod(EasyPatternBuilder.PlaneMethodTypes) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPlaneNormal(Vector3d) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder
-
Sets normal of the plane in which boundary is defined
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlaneNormal(Direction) - Method in interface nxopen.geometricutilities.SectionPlaneData
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlaneOffset(double) - Method in interface nxopen.die.HoleChildBuilder
-
Sets the plane offset of the die hole.
- setPlaneOffset(double) - Method in interface nxopen.die.HoleParentBuilder
-
Sets the plane offset of die holes.
- setPlaneOffsetFixedToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setPlaneOffsetValue(double) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setPlaneOption(ViewProjectionPlaneBuilder.PlaneOptions) - Method in interface nxopen.drawings.ViewProjectionPlaneBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setPlaneOption(MirrorCurveBuilder.PlaneOptions) - Method in interface nxopen.features.MirrorCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlaneOption(MirrorFeatureBuilder.PlaneOptions) - Method in interface nxopen.features.MirrorFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlaneOption(MirrorPattern.PlaneOptions) - Method in interface nxopen.geometricutilities.MirrorPattern
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPlaneOption(OrientXpressBuilder.Plane) - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPlaneOption(Sketch.PlaneOption) - Method in interface nxopen.SketchInPlaceBuilder
-
License requirements: None.
- setPlaneOrientation(Plane) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setPlaneOrientation(SketchAlongPathBuilder.PlaneOrientationType) - Method in interface nxopen.SketchAlongPathBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPlaneOrientationAxis(Direction) - Method in interface nxopen.SketchAlongPathBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPlaneOrigin(Point) - Method in interface nxopen.geometricutilities.SectionPlaneData
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlaneOverlapLogic(PlaneSearchTerm.PlaneOverlapLogicType) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setPlanePoint1(Point) - Method in interface nxopen.geometricutilities.SectionPlaneData
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlanePoint2(Point) - Method in interface nxopen.geometricutilities.SectionPlaneData
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPlaneReference(Plane) - Method in interface nxopen.SketchInPlaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
- setPlanesAtAngles(double[], double[], int[]) - Method in interface nxopen.cam.SpunOutlineGeom
-
Define the section planes at angles
License requirements: cam_base ("CAM BASE")
.
- setPlanesThroughPoints(Point[], double[], int[]) - Method in interface nxopen.cam.SpunOutlineGeom
-
Define the section planes through points
License requirements: cam_base ("CAM BASE")
.
- setPlaneThickness(double) - Method in interface nxopen.display.DynamicSectionBuilder
-
Sets the thickness between active plane pair.
- setPlaneToProjectTo(Plane) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPlaneToRestrictMotion(Plane) - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPlaneType(BoundarySet.PlaneTypes) - Method in interface nxopen.cam.BoundarySet
-
License requirements: cam_base ("CAM BASE")
.
- setPlaneType(SectionViewBuilder.PlaneTypes) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setPlaneType(WeldLabelBuilder.OrientationPlaneType) - Method in interface nxopen.weld.WeldLabelBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setPlaneType(WeldPmiBuilder.OrientationPlaneType) - Method in interface nxopen.weld.WeldPmiBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setPlaneWidth(double) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPlaneXform(NXObject) - Method in interface nxopen.cam.NcmClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPlateAppliedCharx(CharacteristicList) - Method in interface nxopen.routing.PlatformCreatorBuilder
-
Sets the plate charx which is used for platform plate
License requirements: routing_platform ("Routing Platform")
.
- setPlateBoundaryTrimType(int, PlateBoundaryOptionBuilder.TrimTypes) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Sets plate boundary trim type
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setPlateClearanceEighth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceFifth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceFirst(double) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceFirst(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceFirst(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceFourth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceFourth(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceNinth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceSecond(double) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceSecond(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceSecond(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceSeventh(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceSixth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceTenth(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceThird(double) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceThird(double) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClearanceThird(double) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPlateClosureType(EditCornerBuilder.PlateClosureTypeOptions) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setPlateLength(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setPlatePart(CharacteristicList) - Method in interface nxopen.routing.PlatformCreatorBuilder
-
Sets the plate part which data is used for plaform plate
License requirements: routing_platform ("Routing Platform")
.
- setPlateSize(int) - Method in interface nxopen.features.shipdesign.SteelCollarPlateBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setPlatesNumber(DieBaseBuilder.PlatesNumberOpt) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setPlateThicknessExponent(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPlateThicknessRatio(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPlateWidth(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setPlaybackSpeed(int) - Method in interface nxopen.MovieManager
-
Sets the movie playback speed.
- setPlaybackSpeed(MovieSettingsBuilder.PlaybackSpeedChoices) - Method in interface nxopen.MovieSettingsBuilder
-
License requirements: None.
- setPlayMode(int) - Method in interface nxopen.motion.SpreadsheetRunControl
-
License requirements: mechanisms ("MECHANISMS")
.
- setPlayModes(PlayButtonsBuilder.PlayModeValues) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
License requirements: None.
- setPlcBit(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setPlcCodeBlock(PlcBlock) - Method in interface nxopen.ame.PlcMethodBuilder
-
Set selected PlcCodeBlock
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPlcInitState(KinematicSinumerikCaBuilder.PlcInitStateTypes) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setPlcUsage(KinematicSinumerikCaBuilder.PlcUsageTypes) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setPlmxmlFileName(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPlmXmlPostExportPlugin(CustomManager.ImportExportPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin called just after Routing exports an PLMXML file.
- setPlmXmlPreImportPlugin(CustomManager.ImportExportPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin called before importing an PLMXML file.
- setPlmXmlRouteNodeNamePlugin(CustomManager.PlmxmlObjectNamePlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will call to get the name of the next Route Node for the PLMXML file.
- setPlmXmlRouteSectionNamePlugin(CustomManager.PlmxmlObjectNamePlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will call to get the name of the next Route Section for the PLMXML file.
- setPlotDrawingImages(boolean) - Method in interface nxopen.uf.UFDrf
-
- setPlotEnable(boolean) - Method in interface nxopen.motion.GraphBuilder
-
- setPlotQuality(SessionVisualizationHighQualityImage.PlotQualityType) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage
-
Sets the quality of the plot of the High Quality Image.
- setPlotStyle(GraphBuilder.PlotStyleChoices) - Method in interface nxopen.motion.GraphBuilder
-
- setPlotterText(String) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setPlotType(GraphFromResultProbeBuilder.PlotType) - Method in interface nxopen.cae.GraphFromResultProbeBuilder
-
The plot type will be set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPlotType(SimBcPlotContoursBuilder.PlotType) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
Sets plot type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPlotType(PlotType) - Method in interface nxopen.cae.xyplot.PlotParameters
-
License requirements: None.
- setPlotType(PlotBuilder.PlotTypes) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setPlotVariableName(int) - Method in interface nxopen.features.BodyByEquationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPlungeDirection(CutParametersPlungeDirectionTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setPly(int) - Method in interface nxopen.cae.PostJtExportBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setPlyBottom(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyBottom(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyExportOption(LaminateGraphicalReportBuilder.PlyExportOptionType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyFailureTheory(LaminatePly.PlyFailureTheoryType) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setPlyid(int) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPlyMaterialByName(String) - Method in interface nxopen.cae.LaminatePly
-
Sets the ply material by name.
- setPlyMiddle(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyMiddle(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlynum(int) - Method in interface nxopen.cae.ResultMeasureResultOptions
-
Set the ply num in result option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPlySelect(int) - Method in interface nxopen.cae.FlatPatternsBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStrain(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStrain(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setPlyStrainOutput(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStrainRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStrainRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setPlyStrainRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStress(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStress(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setPlyStressCoordSys(LaminateSpreadsheetReportBuilder.CoordinateSystemType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressMaxP(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressMaxS(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressMinP(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressOutput(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setPlyStressRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressXX(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressXY(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressYY(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressYZ(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressZX(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyStressZZ(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyTop(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPlyTop(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setPmarkFrequency(int) - Method in interface nxopen.preferences.SessionModeling
-
- setPmi(PmiOption) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPmi(NXObject) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPmiData(boolean) - Method in interface nxopen.ObjectTypeSelector
-
License requirements: None.
- setPmiDimensionFromRevolved(boolean) - Method in interface nxopen.drawings.InheritPmiViewStyle
-
License requirements: drafting ("DRAFTING")
.
- setPmiDimensionFromRevolved(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPmiFromRevolved(boolean) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPmiPreferences(PmiPreferences) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the global PMI preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setPmiRegionHeight(double) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the rectangular region height
License requirements: None.
- setPmiRegionInnerDiameter(double) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the circular/annular region inner diameter
License requirements: None.
- setPmiRegionOuterDiameter(double) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the circular/annular region outer diameter
License requirements: None.
- setPmiRegionWidth(double) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the rectangular region width
License requirements: None.
- setPmiSupportForGeometrySharing(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setPmiToDrawing(boolean) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPmiTrackingPropertyStatus(String, boolean) - Method in interface nxopen.annotations.PmiTrackingPropertiesBuilder
-
Set the modified tracking status of Inherit PMI properties
License requirements: drafting ("DRAFTING")
.
- setPmiType(SearchModelViewBuilder.PmiTypes) - Method in interface nxopen.annotations.SearchModelViewBuilder
-
License requirements: None.
- setPmiTypeMask(int) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPmiTypes(PmiFilterByType.Type[]) - Method in interface nxopen.annotations.PmiFilterByType
-
Sets the PMI types on the PMI filter
License requirements: geometric_tol ("GDT")
.
- setPmiTypes(int) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPmiViews(String[]) - Method in interface nxopen.annotations.PmiFilterByView
-
Sets the model views on the PMI filter.
- setPntOrigin(Point) - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setPoint(Point) - Method in interface nxopen.Axis
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPoint(String, Point3d) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the point value for the given property name.
- setPoint(Point3d) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setPoint(Point3d) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.cae.connections.LocationWithDir
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPoint(Point) - Method in interface nxopen.cae.connections.PointLocation
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPoint(Point) - Method in interface nxopen.cae.MeshPointInsideVolumeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPoint(Point) - Method in interface nxopen.cae.MeshPointProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPoint(Point) - Method in interface nxopen.cae.NodeCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPoint(Point3d) - Method in interface nxopen.cae.PostSelectionEntity
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPoint(Point) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.FirstPlunge
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.InitialProfilePlunge
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.InPathEventDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.LaserControlPoint
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.LaserPiercingPoint
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.MoveToPointBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(NXObject) - Method in interface nxopen.cam.NcmClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
License requirements: None.
- setPoint(Point3d) - Method in interface nxopen.cam.PathContactMotion
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.ProbeCalibrateLengthMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.cam.ProbeInspectPointMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.cam.ProjVecCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.RotaryPointMoveBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.cam.RotaryPolarMoveBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.cam.StopPosition
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.ToolAxisBase
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.ToolAxisTilt
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.ToolChangePositionBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.cam.TrimPlane
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.TrimPoint
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.TurnMoveToPointBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.UdeParameter
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.cam.WedmPointDefinitionBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPoint(Point) - Method in interface nxopen.die.DieLocationBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.die.PointChildBuilder
-
Sets the location of the point.
- setPoint(Point) - Method in interface nxopen.die.PressureSystemChildBuilder
-
Sets the location of the pressure system.
- setPoint(String) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setPoint(Point) - Method in interface nxopen.drawings.SectionLineSegmentBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPoint(Point) - Method in interface nxopen.drawings.SectionLineSegmentPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPoint(Point) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPoint(Point) - Method in interface nxopen.features.GeodesicPointBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPoint(double) - Method in interface nxopen.features.GeodesicTrimBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPoint(Point) - Method in interface nxopen.features.GeometricConstraintData
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPoint(Point) - Method in interface nxopen.features.PointFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPoint(Point) - Method in interface nxopen.features.ScaleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPoint(Point) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setPoint(Point) - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setPoint(Point) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setPoint(Point) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setPoint(Point) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setPoint(Point) - Method in interface nxopen.geometricanalysis.FaceAnalysisNormalsBuilder
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.geometricutilities.GeometryLocationData
-
License requirements: None.
- setPoint(Point) - Method in interface nxopen.geometricutilities.PatternReferencePointServiceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPoint(Point) - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPoint(Point) - Method in interface nxopen.mechatronics.HingeJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPoint(Point) - Method in interface nxopen.motion.PointOnCurveBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setPoint(Point) - Method in interface nxopen.motion.PointOnSurfaceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setPoint(String, Point3d) - Method in interface nxopen.PropertyContainer
-
Sets the point value for the given property name.
- setPoint(Point) - Method in interface nxopen.RegionPoint
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPoint(Point) - Method in interface nxopen.routing.electrical.AssignProxyBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setPoint(Point) - Method in interface nxopen.routing.IRoutePosition
-
- setPoint(UFVariant, String, Tag) - Method in interface nxopen.uf.UFUde
-
- setPoint(Point) - Method in interface nxopen.weld.JointmarkPointsBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPoint(int) - Method in interface nxopen.weld.WeldPointBuilder
-
Set the selected point
License requirements: ugweld ("UG WELD")
.
- setPoint1(Point) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPoint1(Point) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPoint1(Point) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setPoint1(Point) - Method in interface nxopen.features.shipdesign.PointPairBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setPoint1(Point) - Method in interface nxopen.FourPointSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setPoint2(Point) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPoint2(Point) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPoint2(Point) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setPoint2(Point) - Method in interface nxopen.features.shipdesign.PointPairBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setPoint2(Point) - Method in interface nxopen.FourPointSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setPoint3(Point) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setPoint3(Point) - Method in interface nxopen.FourPointSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setPoint3Value(Point3d) - Method in interface nxopen.cam.CAMAttribute
-
Set the feature attribute point3 value for a point3 type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.
- setPoint4(Point) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setPoint4(Point) - Method in interface nxopen.FourPointSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setPointA(Point) - Method in interface nxopen.features.VariableOffsetBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPointA(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointAFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointAndDirection(Point, Direction) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPointAndDirection(Point, Direction) - Method in interface nxopen.features.DatumPlaneBuilder
-
Sets point and direction
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPointAndTolerance(Point, double) - Method in interface nxopen.cae.PointSelectionRecipe
-
Set the target coordinates.
- setPointB(Point) - Method in interface nxopen.features.VariableOffsetBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPointB(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointBFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointBrightnessMode(PointCloudBuilder.BrightnessModes) - Method in interface nxopen.display.PointCloudBuilder
-
License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.
- setPointC(Point) - Method in interface nxopen.features.VariableOffsetBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPointC(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointCFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointColorMode(PointCloudBuilder.ColorModes) - Method in interface nxopen.display.PointCloudBuilder
-
License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.
- setPointCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointCoverageChanged(boolean) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Flag indicating whether point coverage changed.
- setPointCoverageChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Flag indicating whether point coverage changed.
- setPointCreate(SuppressHoleBuilder.OptionPointCreate) - Method in interface nxopen.cae.SuppressHoleBuilder
-
License requirements: None.
- setPointD(Point) - Method in interface nxopen.features.VariableOffsetBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPointD(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointData(int, NXObject, double, double) - Method in interface nxopen.cam.InspectionPathPointBuilder
-
Create a new path point, name changed if not unique
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointData(int, NXObject, TurnAvoidancePathPointsBuilder.MotionTypes, TurnAvoidancePathPointsBuilder.FeedrateModesTypes, double, TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes, TurnAvoidancePathPointsBuilder.PointStatus, int, NXObject, int, NXObject) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
Create a new avoidance path point, name maybe changed if not unique.
- setPointDataDefinition(InspectionCurveFeatureBuilder.PointDataDefinitionType) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointDataDefinition(InspectionSurfaceFeatureBuilder.PointDataDefinitionType) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointDataFile(String) - Method in interface nxopen.display.PointCloudBuilder
-
License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.
- setPointDefines(OverstockBuilder.PointType) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setPointDefinitionChanged(boolean) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointDefinitionChanged(boolean) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointDensity(double) - Method in interface nxopen.display.PointCloudBuilder
-
License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.
- setPointDensitySize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointDetail(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointDFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointDistanceTolerance(double) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: None.
- setPointEnd(Point) - Method in interface nxopen.cae.AttachElementsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointForRamp(Point) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setPointFrom(Point) - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
License requirements: None.
- setPointFromOrigin(Point) - Method in interface nxopen.features.BlockFeatureBuilder
-
License requirements: None.
- setPointHelix(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointInFormingRegion(NXObject) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPointInPlane(Point) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointInPlane(Point) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointInRegion(Point) - Method in interface nxopen.die.FillBuilder
-
Sets the point in region of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- setPointInRegion(Point) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the keep point in the region of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setPointInRegion(Point) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the point in region of the form task.
- setPointInRegion(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setPointInRegion(Point) - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setPointInRegion1(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setPointLabels(String[]) - Method in interface nxopen.cae.ftk.ArrayRecord2D
-
Sets the point labels
License requirements: None.
- setPointListData(int, NXObject, TurnAvoidancePathPointsBuilder.MotionTypes, TurnAvoidancePathPointsBuilder.FeedrateModesTypes, double, TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
Create a new avoidance path point, name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.
- setPointLocation(AttributeHolder, Point2d) - Method in interface nxopen.diagramminglibraryauthor.PortDataBuilder
-
Sets the port location
License requirements: None.
- setPointM(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointMarker(PointMarker) - Method in interface nxopen.cae.xyplot.BaseSymbolStyleSetting
-
License requirements: None.
- setPointMarker(PointMarker) - Method in interface nxopen.cae.xyplot.LeaderStyle
-
License requirements: None.
- setPointMarkerIdx(PointMarker) - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
License requirements: None.
- setPointMethod(OrientationPointMethodsBuilder.PointMethodTypes) - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setPointMethod(StiffenerSystemBuilder.PointMethods) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setPointMethod(WeldPointMethod) - Method in interface nxopen.weld.WeldPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPointMFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointNameCoord1(String[]) - Method in interface nxopen.cae.connections.ConnectionData
-
Set point name coord1
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointNameCoord2(String[]) - Method in interface nxopen.cae.connections.ConnectionData
-
Set point name coord2
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointNameCoord3(String[]) - Method in interface nxopen.cae.connections.ConnectionData
-
Set point name coord3
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointOfAxis(Tag, double[]) - Method in interface nxopen.uf.UFSo
-
- setPointOfXform(Tag, double[]) - Method in interface nxopen.uf.UFSo
-
- setPointOnConveyingSurface(Point) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setPointOnCurve(double, String, DatumAxisBuilder.AlternateSolution, DatumAxisBuilder.CurveOption, ICurve) - Method in interface nxopen.features.DatumAxisBuilder
-
Sets curve or edge and arc length
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPointOnCurve(double, String, DatumAxisBuilder.CurveOption, ICurve, DisplayableObject) - Method in interface nxopen.features.DatumAxisBuilder
-
Sets Curve or Edge object and arc length with an extra geometry in picture
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPointOnCurve(double, String, DatumAxisBuilder.CurveOption, DisplayableObject, ICurve) - Method in interface nxopen.features.DatumAxisBuilder
-
Sets Curve or Edge object and arc length with an extra geometry in picture
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setPointOnCurve(double, String, DatumPlaneBuilder.AlternateSolution, DatumPlaneBuilder.CurveOption, ICurve) - Method in interface nxopen.features.DatumPlaneBuilder
-
Sets curve or edge and arc length
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPointOnCurve(double, String, DatumPlaneBuilder.AlternateSolution, DatumPlaneBuilder.CurveOption, ICurve, Direction) - Method in interface nxopen.features.DatumPlaneBuilder
-
Sets curve or edge and arc length
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPointOnCurve(double, String, DatumPlaneBuilder.CurveOption, ICurve, DisplayableObject) - Method in interface nxopen.features.DatumPlaneBuilder
-
Sets curve or edge object and arc length with other geometry selected.
- setPointOnCurve(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setPointOnCurve(Point) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPointOnCurve(Point) - Method in interface nxopen.mechatronics.PathConstraintJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPointOnCurve(Point) - Method in interface nxopen.mechatronics.PointOnCurveJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPointOnCurve(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPointOnCurveTParameterFixed(boolean) - Method in interface nxopen.Point
-
Sets the T parameter of the point created using point on curve method
License requirements: None.
- setPointOnEdgeOption(WeldBuilder.PointOnEdgeType) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointOnFace(Point3d) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setPointOnOffsetPlane(Point) - Method in interface nxopen.features.OffsetCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setPointOnPlane(Point3d) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setPointOnString(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
- setPointOnSurfaceConstraint(Tag, UFMotion.PointOnSurfaceData) - Method in interface nxopen.uf.UFMotion
-
- setPointOnZaxis(Point) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointOnZaxis(Point) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointOption(AssociativityPointOption) - Method in interface nxopen.annotations.Associativity
-
Sets the point option
License requirements: None.
- setPointOption(WedmPointDefinitionBuilder.PointStates) - Method in interface nxopen.cam.WedmPointDefinitionBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPointOrderEnum(InspectionLinkPmiBuilder.PointOrderTypes) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointOrigin(Point) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointOrigin(Point) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointOrigin(Point) - Method in interface nxopen.mechatronics.PlanarJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPointOrigin(Point) - Method in interface nxopen.mechatronics.ScrewJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPointOverlay(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setPointOverlay(boolean) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setPointOverlay(boolean) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setPointOverlay(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setPointProfileTolerance(double) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setPointPropertyValue(String, Point) - Method in interface nxopen.cae.PropertyTable
-
Sets the point value of the property
License requirements: None.
- setPoints(Point[]) - Method in interface nxopen.cae.connections.PointSeriesLocation
-
Set location points.
- setPoints(Point[]) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Sets engage/retract points
License requirements: cam_base ("CAM BASE")
.
- setPoints(Point[]) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Sets engage/retract points
License requirements: cam_base ("CAM BASE")
.
- setPoints(Point2d[]) - Method in interface nxopen.markup.Freehand
-
Sets a list of points
License requirements: None.
- setPoints(Point2d[]) - Method in interface nxopen.markup.Polyline
-
Sets a list of points
License requirements: None.
- setPointSelection(Point) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setPointSelection(Point) - Method in interface nxopen.mfg.am.SupportBuilder
-
License requirements: am_pb_mtls_sg_2 ("Advanced NX Additive Support Geometry") OR am_pb_mtls_sg_1 ("Basic NX Additive Support Geometry")
.
- setPointSequence(InspectionMethodBuilder.PolarPointSequenceTypes) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointSequenceChanged(boolean) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Flag indicating whether point sequence changed.
- setPointSequenceChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Flag indicating whether point sequence changed.
- setPointSequenceDirection(InspectionMethodBuilder.PointSequenceDirectionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointSequenceDirection(InspectionMethodBuilder.PointSequenceDirectionTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointSequenceMode(InspectionMethodBuilder.PointSequenceModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointSequenceMode(InspectionMethodBuilder.PointSequenceModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointSequenceStart(InspectionMethodBuilder.PointSequenceStartTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointSequenceStart(InspectionMethodBuilder.PointSequenceStartTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointsGuideDistance(double) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the distance percentage from the start of the curve where the
weld point should be. 0.0 is the start of the curve
100.0 is the end of the curve.
- setPointsInSketch() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Sets points in sketch
License requirements: None.
- setPointSize(int) - Method in interface nxopen.display.PointCloudBuilder
-
License requirements: nx_point_cloud_view ("NX Point Cloud Viewer")
.
- setPointSource(Point) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointSpecify(Point) - Method in interface nxopen.tooling.UndersizeBuilder
-
License requirements: None.
- setPointStart(Point) - Method in interface nxopen.cae.AttachElementsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointStatus(NcmAvoidancePointBuilder.PointStates) - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPointString(Section) - Method in interface nxopen.features.AOCSBuilder
-
Sets the point string
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPointsValueList(double[]) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
Sets the points value list
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setPointTarget(Point) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointTo(Point) - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
License requirements: None.
- setPointToEdgeConnectionMethodType(CAEConnectionBuilder.PointToEdgeConnectionMethodTypeEnum) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPointToProjectToward(Point) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPointType(EditSubopCommand.PointTypes) - Method in interface nxopen.cam.EditSubopCommand
-
License requirements: None.
- setPointType(LaserPiercingPoint.Types) - Method in interface nxopen.cam.LaserPiercingPoint
-
License requirements: cam_base ("CAM BASE")
.
- setPointTypeEnum(InspectionLinearMoveToPointBuilder.PointTypeEnums) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointTypeEnum(InspectionMeasurePointBuilder.PointTypes) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointV1(Point) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointV1(Point) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointV2(Point) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointV2(Point) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPointValue(double) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setPointValue(String, Point3d) - Method in interface nxopen.cam.Cycle
-
Set the point of the parameter
License requirements: cam_base ("CAM BASE")
.
- setPointX(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointX(double) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointX(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointY(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointY(double) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointY(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointZ(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointZ(double) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPointZ(double) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPolarGrid(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPolarGridSize(WorkPlane.PolarGridSize) - Method in interface nxopen.preferences.WorkPlane
-
Set the polar grid size parameters.
- setPolarPointSequence(InspectionMethodBuilder.PolarPointSequenceTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPolarSequenceDirection(InspectionMethodBuilder.PolarSequenceDirectionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPolarSequenceStart(InspectionMethodBuilder.PolarSequenceStartTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPolarShowMajorLines(boolean) - Method in interface nxopen.preferences.WorkPlane
-
Sets the show major lines flag for polar grid
License requirements: None.
- setPoleDisplayColor(int) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPoleDisplayInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPoleDisplayState(boolean) - Method in interface nxopen.DisplayModification
-
Sets the flag for pole display.
- setPoleDisplayStyle(SessionModeling.PoleDisplayStyleType) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPoleEditColor(int) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPoleEditInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPoleEditStyle(SessionModeling.PoleEditStyleType) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPoleEditType(NXObject, int, StudioXformBuilderEx.PoleEditType) - Method in interface nxopen.features.StudioXformBuilderEx
-
Update pole status of the selected BSpine curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPoleGroupEntity(int, Face) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Sets face to control poles group
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPoleGroupEntity(int, Curve) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Sets curve to control poles group
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPoleMoveDirectionEnum(MatchEdgeBuilder.PoleMoveDirection) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setPoleMoveDirectionVector(Direction) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setPoleMovementConstraintType(MatchEdgeBuilder.PoleMovementConstraintEnumType) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setPoles(int, int[], Point[]) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Sets new group poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPolygonBodyResolutionOnFemBodies(PolygonGeometryManager.PolygonBodyResolutionType) - Method in interface nxopen.cae.PolygonGeometryManager
-
Sets the tesselation on polygon bodies that were created from CAD bodies.
- setPolygonBodyResolutionWithRecreate(PolygonGeometryManager.PolygonBodyResolutionType, CAEBody[]) - Method in interface nxopen.cae.PolygonGeometryManager
-
Set Resolution for polygon body with recreate body only
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPolygonBodyResolutionWithRecreateAndUpdate(PolygonGeometryManager.PolygonBodyResolutionType, CAEBody[]) - Method in interface nxopen.cae.PolygonGeometryManager
-
Set Resolution for polygon body with recreate body and update only
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPolygonOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPolygonSizeOption(PolygonPattern.SizeOptions) - Method in interface nxopen.geometricutilities.PolygonPattern
-
License requirements: None.
- setPolylineDisplayColor(int) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPolylineDisplayInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPolylineDisplayStyle(SessionModeling.PolylineStyleType) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPolylineEditColor(int) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPolylineEditInheritColor(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPolylineEditStyle(SessionModeling.PolylineStyleType) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setPopupMenuEnabled(boolean) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setPopupMenuEnabled(boolean) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setPopupMenuEnabled(boolean) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setPopupPoint(Point) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPort(String) - Method in interface nxopen.ame.ConnectedObjectsEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPort(String) - Method in interface nxopen.ame.PortEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPort(NXObject) - Method in interface nxopen.ame.PortsManagerBuilder
-
Sets the source port of the connection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPort(int) - Method in interface nxopen.mechatronics.TransmitterEntryBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPort(int) - Method in interface nxopen.mechatronics.TransmitterExitBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPort(ControlPort) - Method in interface nxopen.motion.InputPortAssociation
-
License requirements: mechanisms ("MECHANISMS")
.
- setPortAnnotationHeight(double) - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPortAnnotationTextCFW(TextColorFontWidthBuilder) - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPortAnnotationTextOverlined(boolean) - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPortAnnotationTextUnderlined(boolean) - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPortBackExtension(Tag, double) - Method in interface nxopen.uf.UFRoute
-
- setPortBackExtensionObj(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- setPortCardinality(String) - Method in interface nxopen.ame.PortBuilder
-
Set the cardinality
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPortClockIncrement(Tag, double) - Method in interface nxopen.uf.UFRoute
-
- setPortCreationType(OperandRuleBuilder.CreationType) - Method in interface nxopen.ame.OperandRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPortDirection(String) - Method in interface nxopen.ame.PortBuilder
-
Set the direction
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPortEngagement(Tag, double) - Method in interface nxopen.uf.UFRoute
-
- setPortEngagementObj(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- setPortExtension(Tag, double) - Method in interface nxopen.uf.UFRoute
-
- setPortExtensionObj(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- setPortId(String) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setPortId(Tag, String) - Method in interface nxopen.uf.UFRoute
-
- setPortLockRotationFlag(Tag, boolean) - Method in interface nxopen.uf.UFRoute
-
- setPortName(String) - Method in interface nxopen.ame.PortBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPortOfPlaceableObject(TaggedObject) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Sets the port for filtration from the part being placed.
- setPortRotByPoint(double[], Tag) - Method in interface nxopen.uf.UFRoute
-
- setPorts(Port, Port) - Method in interface nxopen.routing.PortConnection
-
Sets the link between the two ports connected by the Port Connection object.
- setPortType(String) - Method in interface nxopen.ame.PortBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPose(String[], double[]) - Method in interface nxopen.cam.RobotPoseMove
-
Set real array to the parameter index for the object.
- setPosition(Point3d, Matrix3x3) - Method in interface nxopen.assemblies.DesignElementBuilder
-
Sets the position of design element.
- setPosition(Post.Position) - Method in interface nxopen.cae.PostLegendPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setPosition(FirstPlunge.Positions) - Method in interface nxopen.cam.FirstPlunge
-
License requirements: cam_base ("CAM BASE")
.
- setPosition(Point3d) - Method in interface nxopen.features.HumanBuilder
-
Sets human position
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setPosition(MiterOptions.PositionOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Sets the position of miter.
- setPosition(double[]) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Sets the table position
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.
- setPosition(Point3d) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Sets the point information into the ShipCoordinate builder and a standard point will be created according to the position.
- setPosition(DynamicCurbBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPosition(GroundClearanceBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPosition(ManikinBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPosition(OilPanBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPosition(SlopeBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPosition(StaticCurbBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPosition(WheelCoveringBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPosition(WheelFixingBuilder.PositionType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPosition(Point) - Method in interface nxopen.linedesigner.CreateFactoryElementBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setPosition(Point) - Method in interface nxopen.mechatronics.TransmitterExitBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPosition(Point3d) - Method in interface nxopen.routing.IRoutePosition
-
Sets the current location of the object in ABS coordinates.
- setPosition(DieCavityAndSlugHoleBuilder.InsertPositionItems) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPosition(DieInsertBuilder.PositionItems) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPosition(PiercingInsertBuilder.InsertPosition) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPosition(PunchInsertBuilder.InsertPositionItems) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPosition(UFVariant, double[]) - Method in interface nxopen.uf.UFDrpos
-
- setPositionalValues(BoundaryTurnVariableStock.PositionType) - Method in interface nxopen.cam.BoundaryTurnVariableStock
-
License requirements: cam_base ("CAM BASE")
.
- setPositionAsOption(PartPlacementBuilder.PositionAsType) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
- setPositionColor(int) - Method in interface nxopen.preferences.SessionModeling
-
Sets the position color
License requirements: None.
- setPositionDefinition(BaseDataWheelBuilder.PositionDefinitionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPositionFromStart(double) - Method in interface nxopen.cam.BoundaryTurnVariableStockSet
-
License requirements: cam_base ("CAM BASE")
.
- setPositioning(NcmctPartMountingBuilder.PositioningTypes) - Method in interface nxopen.cam.NcmctPartMountingBuilder
-
License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setPositioning(boolean) - Method in interface nxopen.mechatronics.PhysicsJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPositioningFeature(Sketch) - Method in interface nxopen.tooling.AddReusablePart
-
License requirements: None.
- setPositioningFeature(Sketch) - Method in interface nxopen.tooling.FastenerAssy
-
License requirements: None.
- setPositioningGroupName(String) - Method in interface nxopen.assemblies.PositioningGroupBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setPositioningIsolated(Arrangement) - Method in interface nxopen.assemblies.Component
-
- setPositioningOptionValue(DesignElementBuilder.PositioningOption) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setPositioningTaskCollectionForDesignElements(SessionAssemblies.PositioningTaskCollectionOptionForDesignElements) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the option to specify where to add Design Elements selected whilst working in the Assembly Constraints Dialog.
- setPositioningType(FlexBodyBuilder.Positioning) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setPositioningVaried(Component[], boolean) - Method in interface nxopen.assemblies.Component
-
- setPositionMethod(CloseRangeVisibilityBuilder.PositionMethods) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPositionMethod(PendulumPlacementBuilder.PositionMethodType) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPositionMethod(ECADImportBuilder.PositionMode) - Method in interface nxopen.mechatronics.ECADImportBuilder
-
- setPositionMethod(SIZERImportBuilder.PositionMode) - Method in interface nxopen.tooling.SIZERImportBuilder
-
License requirements: None.
- setPositionMode(AddReusablePart.PositionMethod) - Method in interface nxopen.tooling.AddReusablePart
-
License requirements: None.
- setPositionOption(GraphNamePositionOption) - Method in interface nxopen.cae.xyplot.GraphNameStyle
-
License requirements: None.
- setPositionPath(CloseRangeVisibilityBuilder.PositionPaths) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPositionPoint(Point) - Method in interface nxopen.tooling.MoldFillingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setPositionPrecisionValue(double) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setPositionTolerance(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setPositionTolerance(double) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setPositionTolerance(double) - Method in interface nxopen.features.RuledBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setPositionTolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setPositionTolerance(double) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setPositionTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setPositionTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
License requirements: nx_freeform_1 ("basic freeform modeling") OR features_modeling ("FEATURES MODELING")
.
- setPositionTolerance(double) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPositionTolerance(double) - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setPositionTolerance(double) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setPositionTolerance(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPositionValue(AccessorEvaluatorBuilder.PositionTypeValue) - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPositiveDirection(OrdinatePositiveDirection) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the positive direction
License requirements: None.
- setPositiveDirection(OrdinatePositiveDirection) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setPositiveFaceColor(int) - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPositiveFaceColor(int) - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPositiveFlushnessTolerance(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPositiveGapTolerance(double) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPositiveInnerTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPositiveOuterTolerance(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPositiveToleranceLabelDisplayed(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPossibleContextAttribute(int, String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
Set a possible context attribute (assuming the context entity has not yet been created).
- setPossibleContextAttributeCount(int) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
Set the possible context attribute count (assuming the context entity has not yet been created).
- setPostEvent(boolean) - Method in interface nxopen.cam.PostEventsCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPostFileBrowser(String) - Method in interface nxopen.linedesigner.CreateFenceBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setPostOffset(RailingFeatureBuilder.PostOffsetType) - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setPostprocessorName(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.
- setPostprocessorOutputDirectory(String) - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
.
- setPostToolPathExit(String) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPostType(HandrailBuilder.PostTypes) - Method in interface nxopen.routing.HandrailBuilder
-
License requirements: routing_platform ("Routing Platform")
.
- setPostureData(String, String) - Method in interface nxopen.features.HumanBuilder
-
Set posture data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setPostview(int) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The view where graphics will be displayed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setPowerInput(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPptMergeOption(SolverAppendOption.MergeOption) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPreciseGeom(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setPreciseStructureOnSave(BasePart[]) - Method in interface nxopen.pdm.PdmPart
-
Given an array of parts, Parts to set precise structure on save.
- setPrecision(int) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setPrecisionType(PierceTaskBuilder.PrecisionTypes) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the precision type of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setPrecisionValue(double) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setPrecisionValue(double) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setPredefinedHydraulicOption(DefineCamBuilder.PredefinedHydraulicOptions) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPredictionMethod(HumanPosturePredictionBuilder.PredictionMethodType) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setPredrillPoints(Point[]) - Method in interface nxopen.cam.NcmPlanarBuilder
-
The pre-drill points
License requirements: cam_base ("CAM BASE")
.
- setPredrillPointsOutput(NcmPlanarBuilder.PredrillPointsOutputOptions) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPredrillPointsUseEffectDist(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPreference(DuplicateElementsCheckBuilder.DeletePreference) - Method in interface nxopen.cae.modelcheck.DuplicateElementsCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPreference(DuplicateNodesCheckBuilder.MergePreference) - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPreferences(TitleBlockPreferences) - Method in interface nxopen.annotations.TitleBlock
-
Sets the preferences for the title block
License requirements: drafting ("DRAFTING")
.
- setPreferences(Tag, UFClear.Pref) - Method in interface nxopen.uf.UFClear
-
- setPreferences(int[], double[], String, String) - Method in interface nxopen.uf.UFDrf
-
- setPreferences(Tag, int[], double, String, String, String, String, String, String, double, int, int) - Method in interface nxopen.uf.UFSket
-
- setPreferredDataSources(DataSource[]) - Method in interface nxopen.cae.PostScenarioParameters
-
Set preferred Data Sources to influence the default configuration of a scenario.
- setPreferredFillerStock(CharacteristicList, CharacteristicList) - Method in interface nxopen.preferences.RoutingStock
-
Sets the preferred stock for creating filler stock
License requirements: routing_base ("Routing Basic")
.
- setPreferredLabel(int) - Method in interface nxopen.cae.BushingEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPreferredLabel(int) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPreferredOverstock(CharacteristicList, CharacteristicList) - Method in interface nxopen.preferences.RoutingStock
-
Sets the preferred stock for creating overstock
License requirements: routing_base ("Routing Basic")
.
- setPreferredPortAttribute(String, String) - Method in interface nxopen.preferences.RoutingPart
-
- setPreferredPortName(String) - Method in interface nxopen.preferences.RoutingPart
-
- setPreferredSpaceReservation(CharacteristicList, CharacteristicList) - Method in interface nxopen.preferences.RoutingStock
-
Sets the preferred stock for creating space Reservation
License requirements: routing_base ("Routing Basic")
.
- setPreferredTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltAvoidance
-
License requirements: None.
- setPreferredTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- setPreferStringConstraints(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setPrefix(String) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setPrefix(String) - Method in interface nxopen.drawings.ViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPrefix(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setPrefixCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPrefixCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPrefixCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPrefixOrSuffixString(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPrefixStr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setPrefixSuffixReference(boolean) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the flag indicating whether prefix suffix reference toggle is turned on or not
License requirements: None.
- setPrefixSuffixReference(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Sets the flag indicating whether prefix suffix reference toggle is turned on or not
License requirements: None.
- setPrefs(Tag, UFPlist.Prefs) - Method in interface nxopen.uf.UFPlist
-
- setPreGroup(boolean) - Method in interface nxopen.cae.ImportedSolutionBuilder
-
The pre processing group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPreliminaryBuild(boolean) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the preliminary build switch of the draw die punch casting, if true the fast build options will be used,
if false accurate build options will be used.
- setPreload(boolean) - Method in interface nxopen.motion.JointFrictionAdams
-
Sets the preload
License requirements: mechanisms ("MECHANISMS")
.
- setPreload(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the preload
License requirements: mechanisms ("MECHANISMS")
.
- setPrepareEdges(WeldPrepareEdges) - Method in interface nxopen.weld.GrooveBuilder
-
- setPrepareEdges(WeldGrooveBuilder.Prepare) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPrependString(String) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set prepend string
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setPreselectionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the preselection color.
- setPreSelectionTimeOut(double) - Method in interface nxopen.blockstyler.Tree
-
Sets the pre selection time out.
- setPresentationName(String) - Method in interface nxopen.diagramming.SheetBuilder
-
License requirements: None.
- setPresentationName(String) - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPresentationStyleAsString(String) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setPresentationStyleAsString(String) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setPresentationStyleAsString(String) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setPresentationStyleAsString(String) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setPreserveChangeSymbolDisplay(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPreserveDraftingLayer(boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPreserveFieldOfViewAngleForFit(boolean) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Sets whether for a perspective view the Fit operation should not change the
field of view angle from the camera position to the view bounds
License requirements: None.
- setPreserveFolderStructure(boolean) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setPreserveFolderStructure(boolean) - Method in interface nxopen.annotations.ImportSymbolBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setPreserveGuideShapeOption(boolean) - Method in interface nxopen.features.SweptBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPreserveHiddenStatus(boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPreserveNominalGeometry(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the preserve nominal geometry flag.
- setPreserveShape(boolean) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setPreserveShapeOption(boolean) - Method in interface nxopen.features.SweptBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPressDirection(Vector3d) - Method in interface nxopen.die.LineupBuilder
-
Sets the press direction of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.
- setPressDirection(IReferenceAxis) - Method in interface nxopen.die.RotorBuilder
-
Sets the press direction of the rotor casting.
- SetPressModelBuilder - Interface in nxopen.presslinesimulation
-
- SetPressModelBuilder - Interface in nxopen.tooling
-
- setPressModelFilePath(String) - Method in interface nxopen.presslinesimulation.ConvertFromDieValidationBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setPressModelName(String) - Method in interface nxopen.tooling.SetPressModelBuilder
-
Sets the press model name user selected in the list box
License requirements: nx_dievalidation ("DIE VALIDATION")
.
- setPressModelPartPath(String) - Method in interface nxopen.presslinesimulation.SetPressModelBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setPressModelPath(String) - Method in interface nxopen.tooling.SetPressModelBuilder
-
License requirements: nx_dievalidation ("DIE VALIDATION")
.
- setPressStart(double) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setPressStartAngle(double) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPressStartAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPressStop(double) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setPressStopAngle(double) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPressStopAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPressure(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setPreStressCase(int) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPreStressIncluded(boolean) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPreStressUpdate(DurSpecialistEvent.UpdateCriterionType) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPreventUndercutting(boolean) - Method in interface nxopen.cam.MillCutParameters
-
- setPreview(boolean) - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setPreviewComponentOnAdd(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
- setPreviewEnabled(boolean) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setPreviewFalseBody(boolean) - Method in interface nxopen.tooling.PocketBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR ug_die_design ("Die Design")
.
- setPreviewImage(IssueAttachment) - Method in interface nxopen.issue.IssueContent
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setPreviewImage(IssueAttachment) - Method in interface nxopen.issue.IssueContentBuilder
-
Sets preview image
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setPreviewImageFile(String) - Method in interface nxopen.tooling.ReusableObject
-
License requirements: None.
- setPreviewObject(IdSymbol) - Method in interface nxopen.annotations.IdSymbolBuilder
-
- setPreviewOption(boolean) - Method in interface nxopen.cae.responsesimulation.DynamicEvaluationOutputSettings
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setPreviewOption(boolean) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Sets the preview option.
- setPreviewOption(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPreviewResolution(SessionModeling.PreviewResolutionType) - Method in interface nxopen.preferences.SessionModeling
-
Sets the preview resolution setting.
- setPreviewStyle(ViewWorkflowBuilder.Style) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPreviewToggle(boolean) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setPreviewToggle(boolean) - Method in interface nxopen.routing.ModelTerminalsBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setPreviousWorkPart(Part) - Method in interface nxopen.tooling.BackingPadBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPreviousWorkPart(Part) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPriDatLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPriDirection(InspectionAlignmentBuilder.AlignmentDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPrimary(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setPrimary(GanttOperationObject) - Method in interface nxopen.mechatronics.GanttLinkerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPrimaryArrangement(Arrangement) - Method in interface nxopen.positioning.ComponentPositioner
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setPrimaryDatumDualMCMType(SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setPrimaryDatumDualText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setPrimaryDatumExtendedText(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setPrimaryDatumMCMType(SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setPrimaryDatumReference(DatumReference) - Method in interface nxopen.annotations.FcfFrame
-
- setPrimaryDatumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setPrimaryDegree(int) - Method in interface nxopen.SurfaceRebuildData
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setPrimaryDimensionDecimalPlaces(int) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the number of decimal places for primary dimension
License requirements: None.
- setPrimaryDimensionFractionDenominator(FractionDenominatorFormat) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the primary dimension and tolerance fraction denominator
License requirements: None.
- setPrimaryDimensionFractionDenominator(FractionDenominatorFormat) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setPrimaryDimensionTextFormat(DimensionTextFormat) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the primary dimension text format
License requirements: None.
- setPrimaryDimensionUnit(DimensionUnit) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the primary dimension unit
License requirements: None.
- setPrimaryDirection(InspectionAlignmentAssistantBuilder.Direction) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPrimaryMaxDegree(int) - Method in interface nxopen.SurfaceRebuildData
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setPrimaryMaxSegments(int) - Method in interface nxopen.SurfaceRebuildData
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setPrimaryOffsetGeometry(NXObject) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPrimaryOnReference(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setPrimaryParamFile(String) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setPrimaryRebuildType(SurfaceRebuildData.Type) - Method in interface nxopen.SurfaceRebuildData
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setPrimarySolutionsFlag(boolean) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Sets the primary solutions flag on builder.
- setPrimaryState(InspectionAlignmentAssistantBuilder.State) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPrimaryThicknessUser(double) - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setPrimaryType(InspectionAlignmentAssistantBuilder.FeatureType) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPrimaryVector(Direction) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setPrimePoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPrincipalAxes(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPrincipalAxisStability(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPrincipalAxisStability(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setPrincipalAxisX(boolean) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPrincipalAxisY(boolean) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPrincipalAxisZ(boolean) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setPrincipalMovementDirection(StudioXformBuilderEx.PrincipalMovementDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPrincipalRotatingAxis(StudioXformBuilderEx.PrincipalRotatingAxisType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPrincipalScalingDirection(StudioXformBuilderEx.PrincipalScalingDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setPrint(ProbeControlParametersBuilder.PrintType) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setPrinter(Printer) - Method in interface nxopen.mfg.am.BuildTray
-
Prints the build tray
License requirements: am_pb_cam_basic ("Basic NX Powder Bed Additive Manufacturing Application")
.
- setPrinterGroup(String, String, String) - Method in interface nxopen.uf.UFPlot
-
- setPrinterGroupText(String) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setPrinterText(String) - Method in interface nxopen.Print3dBuilder
-
License requirements: None.
- setPrinterText(String) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setPrintOutput(boolean) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
Print Output
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setPrintoutTags(SimDebugBuilder.PrintoutTagsOrPointersType) - Method in interface nxopen.sim.SimDebugBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setPrintReport(boolean) - Method in interface nxopen.sim.ExportMachineKitBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setPrintReport(boolean) - Method in interface nxopen.sim.ImportMachineKitBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setPriority(int) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setPriority(String) - Method in interface nxopen.issue.IssueContent
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setPriority(String) - Method in interface nxopen.issue.IssueContentBuilder
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setPriorityLevel(CfdAutoRefinementConstraintBuilder.Priority) - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setPriorityLevel(CfdContactPreventionConstraintBuilder.Priority) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setPriorityLevel(CfdLocalResolutionConstraintBuilder.Priority) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setPriXorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPriYorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPriZorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProbabilityOfFailure(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setProbabilityOption(DurabilityEventFatigueSettingsBuilder.ProbabilityOptionEnum) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setProbeAngles() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Set default values for probe angles based on feature type.
- setProbeName(String) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setProbeRotationsAtSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProbeTip() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Set default probe tip based on preferred tip type and probe angles.
- setProbeTipType(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProbeTipType(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProbeTipType(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProbeTipType(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProcess(ColorFeatureGroupBuilder.ProcessType) - Method in interface nxopen.features.ColorFeatureGroupBuilder
-
License requirements: None.
- setProcessActiveHood(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setProcessBinder(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessBinderOption(boolean) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessBinderType(LsdynaGeometryPreparationBuilder.ProcessActionBinder) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessBoundingObjects(boolean) - Method in interface nxopen.features.TrimCurve2Builder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProcessCoplanar(boolean) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setProcessDie(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessDieOption(boolean) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessDieType(LsdynaGeometryPreparationBuilder.ProcessActionDie) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessFive(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProcessForce(String) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setProcessFour(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProcessHoldFlag(boolean) - Method in interface nxopen.DexBuilder
-
License requirements: None.
- setProcessingOrder(DxfdwgImporter.ProcessingOrderAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setProcessName(String) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setProcessObjectsHidden(boolean) - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setProcessOne(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProcessPrimaryHiddenBySecondary(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setProcessPunch(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessPunchOption(boolean) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessPunchType(LsdynaGeometryPreparationBuilder.ProcessActionPunch) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessSecondaryComponents(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setProcessSecondaryHiddenByPrimary(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setProcessSketchCurves(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
- setProcessTangent(boolean) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setProcessThree(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProcessTime(double) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProcessTwo(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProcessType(OnestepUnformBuilder.Process) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setProcessType(LaserControlPoint.ProcessTypes) - Method in interface nxopen.cam.LaserControlPoint
-
License requirements: cam_base ("CAM BASE")
.
- setProcessType(ForceCalculationBuilder.ProcessTypes) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setProcessTypeOption(LsdynaGeometryPreparationBuilder.ProcessType) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProcessViewCurves(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
- setProdInt(TaggedObject) - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Set the product interface tag for the Replacement Assistant.
- setProduct(String) - Method in interface nxopen.ame.AspectPrefixBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProduct(boolean) - Method in interface nxopen.ame.DefineAspectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProductAspect(boolean) - Method in interface nxopen.ame.ReportsSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProductBodies(Body[]) - Method in interface nxopen.die.LineupBuilder
-
Sets the product sheet bodies of the lineup
License requirements: die_engineering ("DIE ENGINEERING")
.
- setProductContactRelief(String) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setProductContactWidth(String) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setProductCSYS(CoordinateSystem) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setProductData(boolean) - Method in interface nxopen.ObjectTypeSelector
-
License requirements: None.
- setProductdefinition(NXObject) - Method in interface nxopen.ame.ProductDefAttributeHolder
-
Set ProductDefinition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProductDefinitionData(Tag, UFPd.ProductDefinition) - Method in interface nxopen.uf.UFPd
-
- setProductDesignation(boolean) - Method in interface nxopen.ame.DefineAspectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProductInterfaceDelay(boolean) - Method in interface nxopen.Update
-
License requirements: None.
- setProductInterfaceEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not Product Interface objects
are emphasized.
- setProductInterfaceEmphasize(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
- setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.CompositeCurveBuilder
-
Sets selected product interface objects
License requirements: None.
- setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.ExtractFaceBuilder
-
Sets selected product interface objects
License requirements: None.
- setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.MirrorBodyBuilder
-
Sets selected product interface objects
License requirements: None.
- setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.WaveDatumBuilder
-
Sets selected product interface objects
License requirements: None.
- setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.WavePointBuilder
-
Sets selected product interface objects
License requirements: None.
- setProductInterfaceObjects(InterfaceObject[]) - Method in interface nxopen.features.WaveSketchBuilder
-
Sets selected product interface objects
License requirements: None.
- setProductInterfaces(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
- setProductionProcessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setProductionProcessType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setProductionUnitAsWorkPart(NXObject) - Method in interface nxopen.linedesigner.UINodeUtils
-
Set Target Production Unit
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitDescription(String[]) - Method in interface nxopen.linedesigner.PlantProductionUnitCreatorBuilder
-
The production unit description is set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitDescription(String[]) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder
-
The production unit description is set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitId(String) - Method in interface nxopen.linedesigner.PlantProductionUnitCreatorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitId(String) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitName(String) - Method in interface nxopen.linedesigner.PlantProductionUnitCreatorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitName(String) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitParent(NXObject) - Method in interface nxopen.linedesigner.PlantProductionUnitCreatorBuilder
-
The production unit parent is set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitParent(Partition) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder
-
The production unit parent is set
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitTypeString(String) - Method in interface nxopen.linedesigner.PlantProductionUnitCreatorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductionUnitTypeString(String) - Method in interface nxopen.linedesigner.ProductionUnitCreatorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setProductOrientation(Matrix3x3) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Set the product orientation
License requirements: None.
- setProductOrientation(Matrix3x3) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Set the product orientation
License requirements: None.
- setProductPoints(Point3d[]) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Set the sample points on the product surface.
- setProductPointsFile(String) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setProductSelection(TaggedObject) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
Set the product selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setProductType(ProductSelectionBuilder.Type) - Method in interface nxopen.ame.ProductSelectionBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.ConnectProfileParentBuilder
-
Sets the connecting profiles of the steel insert
License requirements: ug_die_design ("Die Design")
.
- setProfile(AnalyticalContactBuilder.ProfileType) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setProfileBlendRadius(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setProfileBlendRadius(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setProfileCutRegions(CutParametersProfileCutRegionsTypes) - Method in interface nxopen.cam.TurnCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setProfileDisposition(InspectionMethodBuilder.ProfileDispositionTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProfileDispositionMode(InspectionMethodBuilder.ProfileDispositionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProfileEnd(ProfileFrom) - Method in interface nxopen.routing.Stock
-
Sets the end that defines profile.
- setProfileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setProfilePass(boolean) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: None.
- setProfilePointAlignment(int, int[], double[]) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Set profile string alignment info.
- setProfilePointFile(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setProfileRelief(String) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setProfileRelief(String) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setProfileRelief(String) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setProfileReliefToggle(int) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the profile relief toggle
License requirements: ug_die_design ("Die Design")
.
- setProfileReliefToggle(boolean) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Sets the profile relief toggle
License requirements: ug_die_design ("Die Design")
.
- setProfileReliefToggle(boolean) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Sets the profile relief
License requirements: ug_die_design ("Die Design")
.
- setProfilesDirection(boolean) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setProfileSection(Section) - Method in interface nxopen.cam.LaserProfileMove
-
License requirements: cam_base ("CAM BASE")
.
- setProfileSize(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setProfileSplineLayer(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setProfileText(String) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setProfileTolData(Tag, UFGdt.ProfileType, UFGdt.ToleranceValue) - Method in interface nxopen.uf.UFGdt
-
- setProfileType(int) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setProgramDefinedCsys(NXObject) - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setProgramFile(String) - Method in interface nxopen.report.ProgramInformation
-
License requirements: None.
- setProgramGroup(InspectionGroup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProgramGroup(NCGroup) - Method in interface nxopen.cam.MirrorBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setProgramLocationString(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProgramLocationString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProgramName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProgramName(String) - Method in interface nxopen.uf.UFMisc
-
- setProgramNameMethod(InspectionCmmCommandBuilder.ProgramNameMethods) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProgramToggle(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProgressionSubtype(MeshControlBuilder.ProgressionTypes) - Method in interface nxopen.cae.MeshControlBuilder
-
Sets the progression or bias starting type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setProgStatements(String[]) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Sets the program statements
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProject(String) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setProjectAlongDirection(boolean) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setProjectAsDumbFixedCurves(boolean) - Method in interface nxopen.SketchProjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setProjectCurvesThatLieOnFaceOption(boolean) - Method in interface nxopen.features.DividefaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectDirection(Vector3d) - Method in interface nxopen.cae.QueryCurveUsageOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setProjectDirection(Direction) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setProjectDirection(Vector3d) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the project direction
License requirements: ugweld ("UG WELD")
.
- setProjectDirectionMethod(ProjectionOptions.DirectionType) - Method in interface nxopen.geometricutilities.ProjectionOptions
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectDirectionObject(Direction) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the project direction NXOpen object
License requirements: ugweld ("UG WELD")
.
- setProjected(boolean) - Method in interface nxopen.annotations.DatumReferenceBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setProjected(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setProjectedType(SearchCriteriaFeatureControlFrameBuilder.ProjectedOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setProjectedValue(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setProjectedValue(double) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setProjectedValueType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setProjection(EmbossProjection) - Method in interface nxopen.features.EmbossRegion
-
Sets the emboss projection object
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProjection(CurveCurvatureAnalysisBuilder.ProjectionTypes) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setProjection(CompDrawingBuilder.ProjectionType) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setProjectionAngle(DrawingSheetBuilder.SheetProjectionAngle) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setProjectionAngleType(ConvertLayoutToSheetBuilder.SheetProjectionAngleType) - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setProjectionDirection(Direction) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProjectionDirection(Direction) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProjectionDirectionMethod(EdgeFaceImprintBuilder.ProjectionDirectionType) - Method in interface nxopen.cae.EdgeFaceImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setProjectionDirectionMethod(ImprintBuilder.ProjectionDirectionType) - Method in interface nxopen.cae.ImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setProjectionDirectionMethod(ProjectCurveBuilder.DirectionType) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectionDirectionOption(LaminateDrapingDataBuilder.ProjectionDrapingDirectionType) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setProjectionDirectionOption(FitCurveBuilder.ProjectionDirectionOptions) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProjectionDirectionOption(JointmarkBuilder.ProjectionDirectionOptions) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setProjectionFaces(Face[]) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Sets the point inspection feature projection faces
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectionMethod(WeldProjectionMethod) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the project method type.
- setProjectionNormalFace(SurfaceIntersectionBuilder.NormalTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setProjectionOption(MeshPointProjectBuilder.ProjectionMethod) - Method in interface nxopen.cae.MeshPointProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setProjectionOption(ProjectCurveBuilder.ProjectionOptionType) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectionOption(SurfaceIntersectionBuilder.ProjectionTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setProjectionPlane(Point3d, Vector3d, Vector3d) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder
-
Sets the projection plane specified by origin, y and z vectors, where z is the plane normal and
the x vector is computed.
- setProjectionTolerance(double) - Method in interface nxopen.cae.MeshPointProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setProjectionVector(Direction) - Method in interface nxopen.cae.EdgeFaceImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setProjectionVector(Direction) - Method in interface nxopen.cae.ImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setProjectionVector(Direction) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setProjectionVector(Direction) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectionVector(Direction) - Method in interface nxopen.MeasureDistanceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProjectionXYZ(SurfaceIntersectionBuilder.XyzTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setProjectLastPointToSafePlane(boolean) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectLeader(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setProjectLimit(double) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: None.
- setProjectName(String) - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProjectName(String) - Method in interface nxopen.features.shipdesign.generalarrangement.ProjectInitializationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProjectName(String) - Method in interface nxopen.features.shipdesign.ProjectSetupBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setProjectName(String) - Method in interface nxopen.tooling.CloneObject
-
Sets the project name.
- setProjectName(String) - Method in interface nxopen.tooling.InitProjectBuilder
-
License requirements: None.
- setProjectPlaneNormal(Direction) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectPoint(Point) - Method in interface nxopen.features.GeodesicProjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProjectsData(String[], int[]) - Method in interface nxopen.FileNew
-
- setProjectStartPointToSafePlane(boolean) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectTargetPath(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProjectTemplateFile(String) - Method in interface nxopen.ame.EplanSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProjectTemplateFilePath(String) - Method in interface nxopen.ame.EplanImportProjectTemplateBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProjectToFace(boolean) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectToNearestGeometry(boolean) - Method in interface nxopen.cae.MeshPointProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setProjectToSecondWall(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProjectType(GeodesicProjectBuilder.Type) - Method in interface nxopen.features.GeodesicProjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProjectVector(Direction) - Method in interface nxopen.geometricutilities.ProjectionOptions
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setProjectVertices(boolean) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setProjectWorkPartOrigin(boolean) - Method in interface nxopen.SketchInPlaceBuilder
-
- setProjectXml(String[]) - Method in interface nxopen.ame.ImportHWXmlBuilder
-
Set project xml
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProjPathStr(String) - Method in interface nxopen.tooling.InitProjBuilder
-
License requirements: None.
- setProjTempOpt(InitProjBuilder.ProjTempOption) - Method in interface nxopen.tooling.InitProjBuilder
-
License requirements: None.
- setProjVec(UFVariant, double[]) - Method in interface nxopen.uf.UFDrpos
-
- setPrompt(String) - Method in interface nxopen.uf.UFUi
-
- setPromptVar(InspectionCmmCommandBuilder.PromptVars) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setPropagateActions(boolean) - Method in interface nxopen.uf.UFClone
-
- setPropagateBreakLines(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the propagation of view break.
- setPropagateDelete(boolean) - Method in interface nxopen.Update
-
Sets the propagate delete for update
License requirements: None.
- setPropagatePastSharpEdges(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPropagateViewBreak(boolean) - Method in interface nxopen.drawings.ViewBreakBuilder
-
License requirements: drafting ("DRAFTING")
.
- setPropagationAngle(double) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProperty(int, String) - Method in interface nxopen.ame.EditClauseBuilder
-
Set the property
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setProperty(TaggedObject, String, String) - Method in interface nxopen.Session
-
Sets a named property of the object.
- setProperty() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder
-
The set stamping output display property method
License requirements: die_engineering ("DIE ENGINEERING")
.
- setProperty(Property) - Method in interface nxopen.visualreporting.Condition
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setPropertyDataType(ExternalConnectionElementBuilder.DataType) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPropertyForComparison(Condition, Property) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setPropertyId(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPropertyId(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPropertyId(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPropertyIndexToPlot(int) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
- setPropertyName(String) - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPropertyName(String) - Method in interface nxopen.ame.PropertyEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPropertyName(String) - Method in interface nxopen.ame.SortingBlockBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPropertyName(String) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPropertyNameToPlot(String) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPropertyNameToPlot(String) - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
Sets property name to plot.
- setPropertyOfCondition(Condition, Property) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setPropertyOperator(int, String) - Method in interface nxopen.ame.EditClauseBuilder
-
Set the property operator
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPropertyOption(NodeElementInfoBuilder.PropertyType) - Method in interface nxopen.cae.NodeElementInfoBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setPropertySpecification(Property, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Sets the property specification of the
Property
being built by this builder.
- setPropertySpecification(Property, String, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
Sets the property specification of the
Property
being built by this builder.
- setPropertyStatus(String, boolean) - Method in interface nxopen.features.shipdesign.FilterBuilder
-
GSts the current status true == on or selected, false == off or not selected of the input property.
- setPropertyString(String) - Method in interface nxopen.ame.ObjectConnectionDetailBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPropertyValue(int, String) - Method in interface nxopen.ame.EditClauseBuilder
-
Set the property value
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setPropertyValue(String, String) - Method in interface nxopen.issue.IssueContent
-
Sets the value of
IssueProperty
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- setPropertyValue(String, String) - Method in interface nxopen.issue.IssueContentBuilder
-
Sets the value of
IssueProperty
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- setProportionalAllU(boolean) - Method in interface nxopen.features.StudioXformBuilder
-
- setProportionalAllU(boolean) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setProportionalAllV(boolean) - Method in interface nxopen.features.StudioXformBuilder
-
- setProportionalAllV(boolean) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setProportionalFallOffScale(double) - Method in interface nxopen.features.StudioXformBuilder
-
- setProportionalFallOffScale(double) - Method in interface nxopen.features.StudioXformBuilderEx
-
- setProportionalMoveAfterU(int) - Method in interface nxopen.features.StudioXformBuilder
-
- setProportionalMoveAfterU(int) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setProportionalMoveAfterV(int) - Method in interface nxopen.features.StudioXformBuilder
-
- setProportionalMoveAfterV(int) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setProportionalMoveBeforeU(int) - Method in interface nxopen.features.StudioXformBuilder
-
- setProportionalMoveBeforeU(int) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setProportionalMoveBeforeV(int) - Method in interface nxopen.features.StudioXformBuilder
-
- setProportionalMoveBeforeV(int) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setProportionalPoleControlOption(StudioXformBuilderEx.ProportionalPoleControlType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setProtectCell(boolean) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setProtectCells(boolean) - Method in interface nxopen.annotations.TableColumnBuilder
-
License requirements: drafting ("DRAFTING")
.
- setProtectedFlag(boolean) - Method in interface nxopen.diagramming.tables.TableSettingsBuilder
-
License requirements: None.
- setProtectedMove(boolean) - Method in interface nxopen.cam.MoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setProtectionAreaElementIndex(int) - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setProtectionAreaIndex(int) - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setPrototypePerpendicularVector(Vector3d) - Method in interface nxopen.positioning.ConstraintReference
-
Set the value of the perpendicular vector.
- setPrototypePort(Port) - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setPrototypePortPartOccurrence(Component) - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setProtractorEnd(Point) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setProximityTolerance(double) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
- setProxy(Port) - Method in interface nxopen.diagramming.PortBuilder
-
License requirements: None.
- setProxyAttributeForLocking(String) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setProxyObjectName(String) - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setProxyOverrideObjectName(String) - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setPsdfitFittedData(double[], double[], double[], double, double) - Method in interface nxopen.cae.AfuMathFastRMSOutput
-
License requirements: None.
- setPsdfitOriginalData(double[], double[]) - Method in interface nxopen.cae.AfuMathFastRMSOutput
-
License requirements: None.
- setPsmOutputBody(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT")
.
- setPT11Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT11LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT11Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT11RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT12Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT12LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT12Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT12RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT14Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT14LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT14Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT14RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT15Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT15LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT15Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT15RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT16Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT16LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT16Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT16RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT4Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT4LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT4Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT4RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT6Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT6LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT6Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT6RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT7Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT7LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT7Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPT7RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setPtCrvConstraint(Tag, UFMotion.PointCurveConstraint) - Method in interface nxopen.uf.UFMotion
-
- setPtype(MeasureAngleBuilder.ProjectionType) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setPublishOptionalInfo(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setPullCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.optimization.TBSCastCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setPullDirection(Direction) - Method in interface nxopen.cae.optimization.TBSCastCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setPunchDirection(Direction) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setPunchedWidth(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
- setPunchInsertTag(TaggedObject) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: None.
- setPunchOffsetValue(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchOffsetValue(double) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchOrDie(SpecialPiercingInsertBuilder.PunchOrDieTypes) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPenetration(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setPunchPlateClearance(double) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPlateClearance(double) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setPunchPlateClearance(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setPunchPocketClearanceForBackingPlate(double) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPocketClearanceForBP(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketClearanceForPP(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketClearanceForPunchPlate(double) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPocketClearanceForSP(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketClearanceForStripperPlate(double) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPocketHeightInSP(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketHeightInStripperPlate(double) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPocketToggleForBackingPlate(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPocketToggleForBP(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketToggleForPP(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketToggleForPunchPlate(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPocketToggleForSP(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketToggleForStripperPlate(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPocketTypeInBackingPlate(PunchInsertBuilder.PunchPocketTypeItemsBackingPlate) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPocketTypeInBP(PiercingInsertBuilder.PunchPocketTypeItemsBP) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketTypeInPP(PiercingInsertBuilder.PunchPocketTypeItemsPP) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketTypeInPunchPlate(PunchInsertBuilder.PunchPocketTypeItemsPunchPlate) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPocketTypeInSP(PiercingInsertBuilder.PunchPocketTypeItemsSP) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchPocketTypeInStripperPlate(PunchInsertBuilder.PunchPocketTypeItemsStripperPlate) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchPosition(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the punch profile of the draw die punch casting.
- setPunchProfileAttributes(String, String) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Sets the punch profile edges attributes.
- setPunchRadius(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
- setPunchRadius(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
- setPunchSameOffsetValue(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setPunchSameOffsetValue(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setPunchShankParaC(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setPunchShankParaFL(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setPunchShankParaL1(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setPunchShankParaLength(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setPunchShankParaPL(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setPunchShankParaR(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setPunchShankParaWidth(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setPunchToolId(int) - Method in interface nxopen.features.sheetmetal.BendOptions
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setPunchToolIdName(String) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the punch tool id string selected
License requirements: nx_sheet_metal ("NX Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setPurpose(MechatronicsBuilder.PurposeType) - Method in interface nxopen.motion.MechatronicsBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setPvid(int) - Method in interface nxopen.cae.PostShowhideBuilder
-
Sets Postview id
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setQisvarType(InspectionCmmCommandBuilder.QisvarTypes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setQisvarValue(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setQuadOnlyMesh(boolean) - Method in interface nxopen.cae.MappedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setQuadrantType(HoleReportBuilder.EnumQuadrantType) - Method in interface nxopen.tooling.HoleReportBuilder
-
License requirements: None.
- setQualityPrint(Print3dBuilder.PrintQualityEnum) - Method in interface nxopen.Print3dBuilder
-
License requirements: None.
- setQuan(Result.Quantity) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setQuantityType(AssembliesGeneralPropertiesBuilder.QuantityOptions) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setQuantityType(String, String) - Method in interface nxopen.motion.GraphObjectBuilder
-
Sets a pair of quantity type and its value of graph object
License requirements: mechanisms ("MECHANISMS")
.
- setQueryCriteriaName(int, String) - Method in interface nxopen.ame.TCSavedQueriesBuilder
-
Set the tc query criteria name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setQueryCriteriaValue(int, String) - Method in interface nxopen.ame.TCSavedQueriesBuilder
-
Set the tc query criteria value
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setQueryCurve(QueryCurve) - Method in interface nxopen.cae.QueryCurveUsageOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setQueryFileName(String) - Method in interface nxopen.ame.ReportTemplateBuilder
-
License requirements: None.
- setQueryName(String) - Method in interface nxopen.ame.TCSavedQueriesBuilder
-
Set the tc query name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setQueryName(String) - Method in interface nxopen.assemblies.AttributeSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setQuickCsysData(QuickDatumCsysBuilder) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setQuickPickLockDialogPosition(boolean) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setQuickPickOnDelayToggle(boolean) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setQuoteDate(String) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setQuoteNo(String) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setQuoter(String) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setRadCutMethod(DmRadBuilder.RadCutMethodType) - Method in interface nxopen.cam.DmRadBuilder
-
License requirements: None.
- setRadial(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setRadialAxis(Axis) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setRadialDelta(String) - Method in interface nxopen.geometricutilities.PatternClocking
-
- setRadialDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setRadialEngage(String) - Method in interface nxopen.cam.ThreadedHoleSet
-
License requirements: cam_base ("CAM BASE")
.
- setRadialEngageOption(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRadialEngageOption(String) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRadialFunction(Function) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setRadialFunction(Function) - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setRadialMeasurePoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setRadialOffset(double) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRadialPlaneMode(TurnAvoidanceClearanceBuilder.RadialPlaneModes) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadialPlaneMode(TurnProbeClearanceBuilder.RadialPlaneModes) - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadialPlanePoint(Point) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadialPlanePoint(Point) - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadialPlanePoint(Point) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRadialPlaneValue(double) - Method in interface nxopen.cam.TurnAvoidanceClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadialPlaneValue(double) - Method in interface nxopen.cam.TurnProbeClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadialPlaneVector(Direction) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRadialPointCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRadialSafeClearance(double) - Method in interface nxopen.cam.NcmTurnRoughFinishBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadialSafeClearance(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadialSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- setRadialSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setRadialStock(double) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setRadialSymbol(SearchCriteriaDimensionBuilder.RadialSymbolOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setRadialType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setRadialType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setRadius(double) - Method in interface nxopen.Arc
-
Sets the radius of the arc.
- setRadius(double) - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
License requirements: cam_base ("CAM BASE")
.
- setRadius(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRadius(double) - Method in interface nxopen.cam.NcmClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadius(double) - Method in interface nxopen.cam.TurnConcaveCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setRadius(double) - Method in interface nxopen.cam.TurnCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setRadius(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadius(double) - Method in interface nxopen.die.ThroatChildBuilder
-
Sets the radius to be applied at the back of the throat, top and bottom
License requirements: ug_die_design ("Die Design")
.
- setRadius(double) - Method in interface nxopen.die.ThroatParentBuilder
-
Sets the radius to be applied at the back of the throat, top and bottom
License requirements: ug_die_design ("Die Design")
.
- setRadius(boolean) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setRadius(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
- setRadius(String) - Method in interface nxopen.geometricutilities.CircularCrossSection
-
- setRadius(int, double) - Method in interface nxopen.geometricutilities.CircularFrameBuilder
-
Sets the i-th radius of the circular frame
License requirements: None.
- setRadius(double) - Method in interface nxopen.tooldesigner.ReusePieChartBuilder
-
Set radius
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setRadiusConstraintMethod(BridgeCurveBuilderEx.RadiusConstraintMethods) - Method in interface nxopen.features.BridgeCurveBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setRadiusConstraintType(StyledBlendBuilder.StyledBlendRadiusConstraintType) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setRadiusDiameterOption(RadialDimensionBuilder.ValueOption) - Method in interface nxopen.features.RadialDimensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setRadiusOfDie(String) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
- setRadiusOption(TurnConcaveCornerControl.RadiusOptions) - Method in interface nxopen.cam.TurnConcaveCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setRadiusOption(CircularBlendCurveBuilder.CylinderRadiusOption) - Method in interface nxopen.features.CircularBlendCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRadiusOption(RadiusMethod) - Method in interface nxopen.geometricutilities.CircularCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRadiusOptions(GlobalShapingBuilder.RadiusType) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRadiusOrDistance(double) - Method in interface nxopen.cam.TurnGrooveCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setRadiusSource(SplinePathBuilder.SplinePathRadiusSource) - Method in interface nxopen.routing.SplinePathBuilder
-
License requirements: routing_advanced ("Routing Advanced")
.
- setRadiusSymbol(RadiusSymbol) - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Sets the radius symbol
License requirements: None.
- setRadiusSymbol(String) - Method in interface nxopen.annotations.RadialStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setRadiusSymbolText(String) - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Sets the symbol text for user defined radius symbol
License requirements: None.
- setRadiusSymbolType(RadiusSymbol) - Method in interface nxopen.annotations.RadialStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setRadiusToCenter(boolean) - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Sets the is radius to center
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setRadiusToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadiusTolerance(double) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRadStepoverType(DmRadBuilder.RadStepoverTypeType) - Method in interface nxopen.cam.DmRadBuilder
-
License requirements: None.
- setRadTraverseDir(DmRadBuilder.RadTraverseDirType) - Method in interface nxopen.cam.DmRadBuilder
-
License requirements: None.
- setRailGeometryData(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRailGeometryDataFile(String) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRailingFeature(Feature) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setRailMaterialSide(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRailRollAngleCurve(MotionFunction) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRailSplineFunctions(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRailType(MeshFromBoundaryBuilder.RailOption) - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRailXCurve(MotionFunction) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRailYCurve(MotionFunction) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRailZCurve(MotionFunction) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRamDirection(Direction) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setRampAngle(double) - Method in interface nxopen.cam.NcmEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRampAngle(double) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRampAngle(double) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRampAngleOption(TrimPoint.RampAngleOptions) - Method in interface nxopen.cam.TrimPoint
-
License requirements: cam_base ("CAM BASE")
.
- setRampAngleVector(NXObject) - Method in interface nxopen.cam.TrimPoint
-
License requirements: cam_base ("CAM BASE")
.
- setRampSteps(InsertAuxiliaryBuilder.RampStepsType) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRamToPlungerRatio(double) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setRandom(boolean) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setRandomColorDisplay(PartVisualizationColorSetting.RandomColorDisplayFor) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the random color display selection.
- setRandomColorDisplayOption(boolean) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the random color display flag.
- setRandomfatigue(DurabilityRandomFatigue) - Method in interface nxopen.cae.DurabilityRandomEventBuilder
-
The random fatigue.
- setRandomFatigueMethod(DurabilityRandomFatigueBuilder.RandomFatigueMethodEnum) - Method in interface nxopen.cae.DurabilityRandomFatigueBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setRange(DurSpecialistSuperpositionEventBuilder.RangeType) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setRange(DisplayPropertiesBuilder.ValueRange) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setRangeAuto(boolean) - Method in interface nxopen.cae.xyplot.ArgumentAxisStyleSetting
-
License requirements: None.
- setRangeDepth(BladeCutLevels.RangeDepthTypes) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setRangeDepth(int, double, CutLevel.MeasureTypes) - Method in interface nxopen.cam.CutLevel
-
Set the range depth
License requirements: cam_base ("CAM BASE")
.
- setRangeDepthPerCut(int, double) - Method in interface nxopen.cam.CutLevel
-
Set the range depth per cut
License requirements: cam_base ("CAM BASE")
.
- setRangeDepthType(int) - Method in interface nxopen.cam.MachiningRegionBuilder
-
License requirements: None.
- setRangeGeometry(int, NXObject) - Method in interface nxopen.cam.CutLevel
-
Set the range geometry
License requirements: cam_base ("CAM BASE")
.
- setRangeMax(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setRangeMethodOfRule(Rule, Classifier.RangeMethodOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setRangeMin(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setRangeType(CutLevel.RangeTypes) - Method in interface nxopen.cam.CutLevel
-
License requirements: cam_base ("CAM BASE")
.
- setRangeType(Tag, UFParam.ClvRangeType) - Method in interface nxopen.uf.UFCutLevels
-
- setRangeValue(Face, double[]) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Sets the value of surface range to buider data according to range face.
- setRapid(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setRapidFeedRate(double) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRaptoOffsetToggle(boolean) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRasterImages(boolean) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setRasterImages(boolean) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setRasterImages(boolean) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setRasterImages(boolean) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setRatio(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRationalOutput(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setRatioType(JointDefine.ScrewJointRatioType) - Method in interface nxopen.motion.JointDefine
-
License requirements: None.
- setRayleighDamping(double, double) - Method in interface nxopen.cae.responsesimulation.ModalProperties
-
Set rayleigh's damping for all normal modes
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setRayTracedStudioDisplayGamma(double) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImageDotsPerInch(int) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImageDoubleHeight(double) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImageDoubleWidth(double) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImageFileFormat(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageFileFormatType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImageLockAspectRatio(boolean) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImageOrientation(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageOrientationType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImagePixelHeight(int) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImagePixelWidth(int) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImageResolution(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImageSize(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageSizeType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRayTracedStudioStaticImageUnits(RayTracedStudioEditorBuilder.RayTracedStudioStaticImageUnitsType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setRcp(ControlPoint) - Method in interface nxopen.routing.Corner
-
Sets the corner ControlPoint referenced by the Corner object.
- setRCP(TaggedObject) - Method in interface nxopen.routing.EditBendAngleBuilder
-
Set the Bend RCP to edit.
- setRcs(CartesianCoordinateSystem) - Method in interface nxopen.cam.OrientGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReactionCsys(CoordinateSystem) - Method in interface nxopen.motion.ScalarForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setReactionForce(boolean) - Method in interface nxopen.motion.JointFrictionAdams
-
Sets the reaction force
License requirements: mechanisms ("MECHANISMS")
.
- setReactionForce(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the reaction force
License requirements: mechanisms ("MECHANISMS")
.
- setReactionPoint(Point) - Method in interface nxopen.motion.BushingDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setReactionPoint(Point) - Method in interface nxopen.motion.ConnectorBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setReactionPoint(Point) - Method in interface nxopen.motion.ScalarForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setReaderType(String) - Method in interface nxopen.cae.SimLoadRecipeSource
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setReadingDirection(boolean) - Method in interface nxopen.preferences.SessionPmi
-
Sets the reading direction preference
License requirements: None.
- setReadLayerNumFromPrefix(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setReadOneModeOrthogonalPair(boolean) - Method in interface nxopen.cae.PostResultPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setReadOnlyString(boolean) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setReadOnlyValue(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setReadOnlyValue(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setReal(double) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRealArrayValue(String, double[]) - Method in interface nxopen.cam.CAMObject
-
Set real array to the parameter index for the object.
- setRealData(double[], double[]) - Method in interface nxopen.cae.AfuData
-
Set the XY Data of an AFU Data Record when the ordinate type is real
License requirements: None.
- setRealData(double, double, double[]) - Method in interface nxopen.cae.AfuData
-
Set the XY Data of an AFU Data Record when the ordinate type is real and the absicssa type is even
License requirements: None.
- setRealData(double[], double[]) - Method in interface nxopen.cae.ftk.ArrayRecord2D
-
Sets real points data
License requirements: None.
- setRealOffset(double) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Sets the abscissa offset for real part
License requirements: None.
- setRealOffset(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Sets the offset for real part
License requirements: None.
- setRealQuantity(double) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setRealQuantity(Component, double, String) - Method in interface nxopen.assemblies.ComponentAssembly
-
Sets the real quantity and corresponding units on this component.
- setRealScale(double) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Sets the abscissa scale for real part
License requirements: None.
- setRealScale(double) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Sets the scale of real part
License requirements: None.
- setRealTimeType(Shadows.RealTimeState) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setRealUserAttribute(Tag, String, int, double, Tag, boolean) - Method in interface nxopen.uf.UFAttr
-
- setRealValue(double) - Method in interface nxopen.annotations.CustomSymbolTextData
-
- setRealValue(String, double) - Method in interface nxopen.cam.CAMObject
-
Set a real value to the parameter index for the object.
- setRealValue(Expression) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setRearCrossPosition(CrashBarrierBuilder.CrossPositionType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearHeaderFeature(HeadImpactRearHeader) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearLoading(String) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearLoading(String) - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearLoading(String) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearOverhang(double) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- setRearOverlapSide(CrashBarrierBuilder.OverlapSideType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearPositionObject(CrashBarrierBuilder.PositionObjectType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearShape(CrashBarrierBuilder.ShapeType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearSurfacePlane(WheelCoveringBuilder.SurfacePlaneType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearSurfaceSection(WheelCoveringBuilder.SurfaceSectionType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRearUserDefineWidth(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReason(String) - Method in interface nxopen.routing.DesignRuleOverride
-
Sets the reason of the design rule override is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setReason(String[]) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Sets the reason
License requirements: die_engineering ("DIE ENGINEERING")
.
- setReason(String) - Method in interface nxopen.validate.OverrideBuilder
-
License requirements: ug_checkmate ("UG Check Mate")
.
- setReassignOnSegments(boolean) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setReassignPositionNumbers(boolean) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
License requirements: None.
- setReassociateLeader(boolean) - Method in interface nxopen.drafting.CutCopyPasteLeaderBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReboundDampingFactorFlag(boolean) - Method in interface nxopen.motion.BodyContactRecurdyn
-
License requirements: mechanisms ("MECHANISMS")
.
- setReboundDistance(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRebuildData(SurfaceRebuildData) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setRebuildType(Rebuild.RebuildTypes) - Method in interface nxopen.geometricutilities.Rebuild
-
Sets the rebuild type.
- setRecallCsys(CoordinateSystem) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRecallDid(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRecallExtName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRecallIntName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRecallState(InspectionAlignmentBuilder.RecallStates) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReceiverID(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setReceptacleType(MountingInterfaceBuilder.ReceptaclePolicy) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setRecessAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Sets the recess attributes
License requirements: ug_die_design ("Die Design")
.
- setRecessAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Sets the recess attributes
License requirements: ug_die_design ("Die Design")
.
- setRecognitionType(FeatureRecognitionBuilder.RecognitionEnum) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
License requirements: None.
- setRecognizeFlatOption(boolean) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRecordAllTransform(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the record all transform flag
License requirements: None.
- setRecordDisplayVisibility(int, boolean) - Method in interface nxopen.cae.xyplot.Plot
-
Sets the visibility of specified record.
- setRecordedSteps(int[]) - Method in interface nxopen.motion.LoadTransferBuilder
-
Sets recorded steps
License requirements: mechanisms ("MECHANISMS")
.
- setRecordName(String) - Method in interface nxopen.cae.AfuData
-
Sets the name of the AFU Data Record
License requirements: None.
- setRecordNetlistHistory(boolean) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the option to record import and export activity in the Connection and Component Lists.
- setRecordOptionData(String, XyFunctionGeneralType, AfuData.AbscissaType, XyFunctionUnit, AfuData.OrdinateType, XyFunctionUnit, XyFunctionUnit, boolean) - Method in interface nxopen.cae.ftk.OptionSetting
-
Set the record options data for an AFU Data Record
License requirements: None.
- setRecordPrefix(String) - Method in interface nxopen.cae.responsesimulation.DynamicEvaluationOutputSettings
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setRecordPrefix(String) - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setRecords(BaseRecord[]) - Method in interface nxopen.cae.xyplot.BasePlotParameters
-
Sets the records to be plotted
License requirements: None.
- setRecreateDeletedWelds(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setRecreateStockComponentsOption(boolean) - Method in interface nxopen.routing.StockPartConverterBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setRectangleBase(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setRectangleHeight(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setRectangleLayer(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRectanglePointFirst(Point) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setRectanglePointSecond(Point) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setRectanglePointThird(Point) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setRectangular(boolean) - Method in interface nxopen.die.RibChildBuilder
-
Sets the rectangular switch of the die rib, if true the lightening core will be rectangular,
if false it will follow the shape of the rib.
- setRectangular(boolean) - Method in interface nxopen.die.RibParentBuilder
-
Sets the rectangular switch of die ribs, if true the lightening cores will be rectangular,
if false they will follow the shape of the rib.
- setRectangularDimensions(double, double) - Method in interface nxopen.routing.PathStockBuilder
-
Set the rectangular height and width value for the rectangular space reservation assignment
License requirements: routing_base ("Routing Basic")
.
- setRectangularNonuniformGridSize(WorkPlane.NonuniformGridSize) - Method in interface nxopen.preferences.WorkPlane
-
Set the rectangular nonuniform grid size parameters.
- setRectangularOperation(InsertAuxiliaryBuilder.RectOperationOption) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setRectangularSection(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRectangularShowMajorLines(boolean) - Method in interface nxopen.preferences.WorkPlane
-
Sets the show major lines flag for rectangular grid
License requirements: None.
- setRectangularUniformGridSize(WorkPlane.GridSize) - Method in interface nxopen.preferences.WorkPlane
-
Set the rectangular uniform grid size parameters.
- setRectangularXVector(Direction) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setRectangularYVector(Direction) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setRectDeleteAllComponents(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setRecurdynSolverProperty(RecurdynSolverProperty) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setReduceDepthPerCutWhenEmbeded(boolean) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setReducedFaceType(ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReduceValueType(ReduceSurfaceRadiusBuilder.ReduceValueTypeSpecification) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReductionRate(double) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setRefCS(CoordinateSystem) - Method in interface nxopen.cae.AssignNodalCSBuilder
-
License requirements: None.
- setRefCSType(AssignNodalCSBuilder.CSType) - Method in interface nxopen.cae.AssignNodalCSBuilder
-
License requirements: None.
- setRefCsys(CoordinateSystem) - Method in interface nxopen.cae.NodeModifyLabelBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRefCsys(CoordinateSystem) - Method in interface nxopen.tooling.StockSizeBuilder
-
- setRefCutter(Tag, Tag) - Method in interface nxopen.uf.UFOper
-
- setReference(boolean) - Method in interface nxopen.annotations.DrivingValueBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setReference(String[]) - Method in interface nxopen.annotations.LineWeldBuilder
-
Sets the reference or specification text
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setReference(String) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the string to define reference direction sense
License requirements: None.
- setReference(LaminateRandomEventBuilder.ReferenceEnum) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- setReference(SheetElement) - Method in interface nxopen.diagramming.LocationBuilder
-
License requirements: None.
- setReference(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the status of reference, that toggles a view from active to reference.
- setReference(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReference(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of reference.A view can have a status of either Active or Reference.
- setReference(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Sets reference set.
- setReferenceAsString(String) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setReferenceAttribute(String, String) - Method in interface nxopen.NXObject
-
- setReferenceAttribute(String, String, Update.Option) - Method in interface nxopen.NXObject
-
- setReferenceCenter(Point3d) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setReferenceCenter(Point3d) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setReferenceCharacteristic(String, String) - Method in interface nxopen.routing.Port
-
Sets a reference characteristics on the port.
- setReferenceComponent(AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setReferenceCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setReferenceCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setReferenceCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReferenceCsys(TaggedObject) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setReferenceCsys(Result.CoordinateSystem) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The reference coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setReferenceCsys(CoordinateSystem) - Method in interface nxopen.cae.MechanicalLoadSumBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setReferenceCsys(CoordinateSystem) - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setReferenceCSYS(CoordinateSystem) - Method in interface nxopen.features.ScaleCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReferenceCsys(CoordinateSystem) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setReferenceCsysPattern(NXObject) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setReferenceCsysType(ToolingBoxBuilder.RefCsysType) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setReferenceCsysType(StockSizeBuilder.RefCsysType) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReferenceCurveColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch reference curve color
License requirements: None.
- setReferenceCurves(Curve[]) - Method in interface nxopen.die.Tip
-
Sets reference curves in the die tip feature.
- setReferencedAttachmentId(String) - Method in interface nxopen.issue.IssueAttachment
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setReferencedCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.optimization.TBSCheckDOF
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setReferenceDiameter(double) - Method in interface nxopen.tooling.QuickDatumCsysBuilder
-
Sets the reference diameter.
- setReferenceDimension(boolean) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the flag indicating whether the dimension is a reference dimension
License requirements: None.
- setReferenceDimension(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setReferenceDimensionColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch reference dimension color
License requirements: None.
- setReferenceDimensionFlag(boolean) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the visibility of the reference parenthesis of a dimension.
- setReferenceDimensionPrefix(String) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the prefix characters for reference dimension
License requirements: None.
- setReferenceDimensionPrefix(String) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Sets the prefix characters for reference dimension
License requirements: None.
- setReferenceDimensionSuffix(String) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the suffix characters for reference dimension
License requirements: None.
- setReferenceDimensionSuffix(String) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Sets the suffix characters for reference dimension
License requirements: None.
- setReferenceDirection(boolean) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReferenceDirection(Direction) - Method in interface nxopen.features.IsoclineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setReferenceDirection(IReferenceAxis, AxisOrientation) - Method in interface nxopen.features.RPOBuilder
-
Sets a horizontal or vertical reference for the feature.
- setReferenceDirection(Vector3d) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReferenceDirection(Vector3d) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReferenceDirection(Direction) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setReferenceDirection(IReferenceAxis, Vector3d, AxisOrientation, Sense) - Method in interface nxopen.Sketch
-
Sets the reference direction of the sketch.
- setReferenceDirection(Direction) - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setReferenceDirectionOption(ImageBaseBuilder.ReferenceDirection) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setReferenceDirectionOption(SilhouetteFlangeBuilder.ReferenceDirectionOptions) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setReferencedObjects(Function[]) - Method in interface nxopen.cae.FunctionBuilder
-
Sets referenced objects of a math function.
- setReferencedSolution(SimSolution) - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setReferencedSolution(SimSolution) - Method in interface nxopen.cae.responsesimulation.SolutionBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReferencedSpindle(String) - Method in interface nxopen.sim.KinematicChannelBuilder
-
Sets a referenced spindle of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setReferencedSpindles(String[]) - Method in interface nxopen.sim.KinematicChannelBuilder
-
Sets a list of referenced spindles of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setReferenceEdgesOnly(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the status of reference edges only.This controls the rendering of hidden edges with
annotation.
- setReferenceEdgesOnly(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReferenceEdgesOnly(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the status of reference edges only.This controls the rendering of hidden edges with
annotation.
- setReferenceElement(FEElement) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReferenceElementDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReferenceEntity(NXObject) - Method in interface nxopen.features.sheetmetal.RebendBuilder
-
Sets the non-thickness planar face or linear edge to remain fixed while part is rebent
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setReferenceEntity(NXObject) - Method in interface nxopen.features.sheetmetal.UnbendBuilder
-
Sets the non-thickness planar face or linear edge to remain fixed while part is unbent
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setReferenceFaceNormalReversed(boolean) - Method in interface nxopen.features.LawExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setReferenceFaceNormalReversed(boolean) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setReferenceFeature(Feature) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the reference feature - must be either a die section or form task feature
License requirements: die_engineering ("DIE ENGINEERING")
.
- setReferenceFeatureAutoName(String) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFeatureMode(InspectionMethodBuilder.ReferenceFeatureModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFeatureModeValue(InspectionMethodBuilder.ReferenceFeatureModeTypes) - Method in interface nxopen.cam.InspectionPathBuilder
-
Set the reference feature mode
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFeatureName(String) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFeatureName(String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReferenceFeatureOffsetDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFeatureOffsetDistanceValue(double) - Method in interface nxopen.cam.InspectionPathBuilder
-
Set the reference feature offset distance
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFeaturePointCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFeaturePointCountValue(int) - Method in interface nxopen.cam.InspectionPathBuilder
-
Set the reference feature point count
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFeatureZoneRadius(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFeatureZoneRadiusValue(double) - Method in interface nxopen.cam.InspectionPathBuilder
-
Set the reference feature zone radius
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceFrame(MotionSensorBuilder.Reference) - Method in interface nxopen.motion.MotionSensorBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setReferenceGeometryGapTolerance(double) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setReferenceGeometryImportColor(int) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the reference geometry import color for I-DEAS
License requirements: None.
- setReferenceGeometryImportLayer(int) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the reference geometry import layer for I-DEAS
License requirements: None.
- setReferenceGeometryPlane(Plane) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setReferenceGeometrySearchDistance(double) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setReferenceId(int) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the ID of reference element or node
License requirements: None.
- setReferenceId(String) - Method in interface nxopen.routing.RunItem
-
Sets the unique reference identifier for this Run Item.
- setReferenceIndex(int) - Method in interface nxopen.annotations.BaseCenterline3dBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setReferenceNode(boolean) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setReferenceNode(FENode) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReferenceNodeDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReferenceNodeLabel(int) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setReferenceNodeLabel(int) - Method in interface nxopen.cae.ResultParameters
-
Sets the node label which identifies the reference node used when plotting the result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setReferenceObject(IGraphSource) - Method in interface nxopen.motion.GraphObjectBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setReferenceObject(LogicalObject) - Method in interface nxopen.pdm.PartOperationAttributePropertiesBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setReferenceObjectForPlacement(TaggedObject, Point3d) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Sets the reference object and reference location for placement.
- setReferenceOption(OrientXpressBuilder.Reference) - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReferenceOption(StyledSweepReferenceMethodBuilder.ReferenceOptions) - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setReferenceOrigin(Point) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setReferenceOutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReferenceOutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReferenceOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReferenceOutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReferencePlane(Plane) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReferencePlane(Plane) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReferencePlane(InverseBendingLinesBuilder.ReferencePlaneType) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setReferencePlane(TabNoteCfgBuilder.Refplane) - Method in interface nxopen.features.TabNoteCfgBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReferencePlane(DatumPlane) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Sets the reference plane to represent the loading plane.
- setReferencePlaneLocation(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setReferencePlanePoint(Point) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setReferencePoint(Point) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setReferencePoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReferencePoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReferencePoint(Point) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setReferencePoint(Point3d) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the reference point.
- setReferencePoint(Point3d) - Method in interface nxopen.die.QuickBinderBuilder
-
Set the point used to determine the start and end side of the face.
- setReferencePoint(boolean, HumanData.ReferencePointType, Point) - Method in interface nxopen.features.HumanBuilder
-
Sets the reference point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setReferencePoint(Point) - Method in interface nxopen.features.MirrorBuilder
-
- setReferencePoint(Point) - Method in interface nxopen.features.PatternFeatureBuilder
-
- setReferencePoint(Point) - Method in interface nxopen.features.ScaleCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReferencePoint(Point3d) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReferencePoint(Point3d) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReferencePoint(Point) - Method in interface nxopen.features.SweptVolumeBuilder
-
License requirements: None.
- setReferencePoint(Point3d) - Method in interface nxopen.features.TrimCornerBuilder
-
Sets the reference point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setReferencePoint(Point) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setReferencePoint(Point) - Method in interface nxopen.routing.FormboardFrame
-
Sets the formboard frame reference point
License requirements: routing_harness ("Routing Harness")
.
- setReferencePoint(Point) - Method in interface nxopen.tooling.WorkpieceBuilder
-
License requirements: None.
- setReferencePointCoordinates(Point3d) - Method in interface nxopen.features.HumanBuilder
-
Sets the reference point coordinates.
- setReferencePointForEqualArcLength(Point) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReferencePointInferred(boolean) - Method in interface nxopen.geometricutilities.PatternReferencePointServiceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReferencePointJunction(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setReferencePointPrecision(double) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setReferencePointType(HumanData.ReferencePointType) - Method in interface nxopen.features.HumanBuilder
-
Sets the reference point type
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setReferencePort(TaggedObject) - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setReferencePosition(Point) - Method in interface nxopen.tooling.StandardPartPositionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReferencePositionType(TransientText.StandardTextRef) - Method in interface nxopen.display.TransientText
-
Sets the position of the text relative to positions on the text box
License requirements: None.
- setReferencePropertiesOfReport(Property[], VisualReportBuilder.PropertyUsageOption[]) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setReferencePropertiesOfReportingProperty(Property[], VisualReportBuilder.PropertyUsageOption[]) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setReferencePropertyValue(String, NXObject) - Method in interface nxopen.cae.PropertyTable
-
Sets the referenced object value of the property
License requirements: None.
- setReferencePropertyValueArray(String, NXObject[]) - Method in interface nxopen.cae.PropertyTable
-
Sets the array of referenced objects in the property value
License requirements: None.
- setReferencePt1(CorrelAlignmentBuilder.ReferencePt) - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
Sets the reference common origin point
License requirements: nx_correl_base ("FE Correlation")
.
- setReferencePt2(CorrelAlignmentBuilder.ReferencePt) - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
Sets the reference first axis origin point
License requirements: nx_correl_base ("FE Correlation")
.
- setReferencePt3(CorrelAlignmentBuilder.ReferencePt) - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
Sets the reference second axis point
License requirements: nx_correl_base ("FE Correlation")
.
- setReferenceSet(String) - Method in interface nxopen.assemblies.AddComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setReferenceSet(CreateNewComponentBuilder.ComponentReferenceSetType) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setReferenceSet(DesignElementBuilder.ReferenceSetType) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setReferenceSet(String) - Method in interface nxopen.tooling.FeatureReferenceSetBuilder
-
Set current selected reference set
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReferenceSet(StandardPartBuilder.RefsetName) - Method in interface nxopen.tooling.StandardPartBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR ug_die_design ("Die Design")
.
- setReferenceSetBehavior(ReferenceSetBehavior) - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReferenceSetName(String) - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setReferenceSetName(String) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setReferenceSetName(String) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
License requirements: shape_search ("Shape Search")
.
- setReferenceSetOverride(boolean) - Method in interface nxopen.LoadOptions
-
Sets the option that specifies if the default reference set list should be
applied to components all the way down an assembly tree.
- setReferenceSets(PocketBuilder.RsetType) - Method in interface nxopen.tooling.PocketBuilder
-
License requirements: None.
- setReferenceSheetSpacingMethod(WeldPointSpacingMethod) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the refsheet spacing method
License requirements: ugweld ("UG WELD")
.
- setReferenceSheetType(JointmarkBuilder.ReferenceSheetTypes) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setReferenceSheetType(WeldPointReferenceSheetType) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the type of sheet to create to place weld points on.
- setReferenceSolution(SimSolution) - Method in interface nxopen.cae.aerostructures.MarginSolutionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setReferenceSolution(SimSolution) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setReferenceStatus(Tag, Tag, UFSket.ReferenceStatus) - Method in interface nxopen.uf.UFSket
-
- setReferenceStockFromObject(NXObject) - Method in interface nxopen.routing.StockCollection
-
Sets the reference
Stock
information based
on the
Stock
associated with this object.
- setReferencesToReuse(Feature, NXObject[]) - Method in interface nxopen.features.MirrorBuilder
-
Sets the references or selections from the input features which are to be reused for mirror.
- setReferencesToReuse(Feature, NXObject[]) - Method in interface nxopen.features.PatternFeatureBuilder
-
Sets the references or selections from the input features which are to be reused for all instances.
- setReferenceStringUserAttribute(Tag, String, int, String, boolean) - Method in interface nxopen.uf.UFAttr
-
- setReferenceSymbolCustomText(String) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setReferenceSymbolText(PartsListBuilder.PartsListReferenceSymbolText) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setReferenceTool(Tool) - Method in interface nxopen.cam.MillOperationBuilder
-
License requirements: None.
- setReferenceToolDiameter(double) - Method in interface nxopen.cam.DriveMode
-
License requirements: None.
- setReferenceToShow(ReferenceShowTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReferenceToShow(ReferenceShowTypes) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReferenceToShow(ReferenceShowTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReferenceType(boolean) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setReferenceType(LaminateDynamicEventBuilder.ReferenceTypeEnum) - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setReferenceType(ToolPathTiltTilting.ReferenceTypes) - Method in interface nxopen.cam.ToolPathTiltTilting
-
License requirements: None.
- setReferenceType(IgesCreator.CsysrefEnum) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setReferenceUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReferenceUsingUserDefinedDirection(NodalFunctionEvalRequest) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReferenceValue(double) - Method in interface nxopen.cae.optimization.TBSSingleObjective
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setReferenceVector(Direction) - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setReferenceVector(Direction) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReferenceVector(ILocation) - Method in interface nxopen.die.PierceItemBuilder
-
Sets the reference direction of the hole
License requirements: die_engineering ("DIE ENGINEERING")
.
- setReferenceVector(Direction) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReferenceVector(Direction) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setReferenceVector(Direction) - Method in interface nxopen.formboard.OrientBranchBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setReferenceVector(Direction) - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setReferenceVector(Direction) - Method in interface nxopen.routing.AlignStockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setReferenceVertex(Point3d) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Sets the end of the edge where the tangent will define the x axis for flat as solid.
- setReferenceVertex(Point3d) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Sets the end of the edge where the tangent will define the x axis for flat as solid.
- setReferPart(boolean) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setRefFaces(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroFlangeBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setRefitDirection(RefitControlBuilder.RefitControlDirection) - Method in interface nxopen.geometricutilities.RefitControlBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setRefitMethod(RefitControlBuilder.RefitControlMethod) - Method in interface nxopen.geometricutilities.RefitControlBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setReflectAccuracy(int) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReflectData(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReflectionLocked(boolean) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setReflectionMap(Reflection.Type) - Method in interface nxopen.display.Reflection
-
License requirements: None.
- setReflectivity(double) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setReflectivity(double) - Method in interface nxopen.display.Wall
-
License requirements: None.
- setReflectivityType(DecalBuilder.DecalReflectivities) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setReflectivityValue(double) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setReflectMethod(ReflectionDataBuilder.ReflectMethodType) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReflectTraceCurve(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRefObjectType1(StepBuilder.ReferenceBoundaryTypes) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setRefObjectType2(StepBuilder.ReferenceBoundaryTypes) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setRefPlyId(int) - Method in interface nxopen.cae.LaminateMatOrientationBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setRefPoint(Point) - Method in interface nxopen.cae.NodalForceReportBuilder
-
License requirements: None.
- setRefPoint(Point) - Method in interface nxopen.die.AddSurfBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRefPointOption(int) - Method in interface nxopen.mechatronics.CamBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setRefractData(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRefractionIndex(double) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRefractTraceCurve(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRefreshBeforeDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRefreshPrecision(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setRefSetByCset(Tag, String) - Method in interface nxopen.uf.UFAssem
-
- setRefSetNames(String[]) - Method in interface nxopen.LinkedMirrorPartBuilder
-
Sets the names of the reference sets that are selected for mirroring
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRefType(LaserLinearMove.RefTypes) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setRefType1(ShelfBuilder.ReferenceType) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setRefType2(ShelfBuilder.ReferenceType) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setRegenerateOffsetMesh(boolean) - Method in interface nxopen.facet.LocalOffsetBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setRegion(DrawingRegion) - Method in interface nxopen.drawings.RemoveObjectsBuilder
-
Set the region
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setRegion(int[], int[]) - Method in interface nxopen.gateway.ImageCaptureBuilder
-
Sets the region
License requirements: drafting ("DRAFTING")
.
- setRegionAssignToRegionOption(MWMoldedPartValidationBuilder.AssignToRegion) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionBandBottomNumber(int) - Method in interface nxopen.cam.CutBand
-
License requirements: None.
- setRegionBandTopNumber(int) - Method in interface nxopen.cam.CutBand
-
License requirements: None.
- setRegionBoundaryColor(NXColor) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the region boundary color
License requirements: None.
- setRegionBoundaryFont(int) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the region boundary font
License requirements: None.
- setRegionBoundaryWidth(int) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the region boundary width
License requirements: None.
- setRegionBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.FillBuilder
-
Sets the region bounds of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- setRegionBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the region bounds of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setRegionBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the region bounds of the form task.
- setRegionCavityRegionColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionCavityRegionTranslucency(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionColor(NXColor) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setRegionConnection(boolean) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setRegionConnection(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setRegionCoreRegionColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionCoreRegionTranslucency(int) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionFont(PartDrafting.FontType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setRegionIndex(int[]) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Sets the region index.
- setRegionMachining(RoughFinishTurningBuilder.RegionMachiningTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRegionMethod(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRegionMethod(int) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRegionMethod(int) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRegionOption(PlateBuilder.RegionOptions) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setRegionOption(EnlargeSurfaceBuilder.KeepDiscardOption) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
License requirements: None.
- setRegionParameters(double, boolean, double, double) - Method in interface nxopen.uf.UFGdt
-
- setRegionPickPoint(Point3d) - Method in interface nxopen.features.SnipSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setRegionPoint(Point) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRegionPoint(Point3d) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setRegionPoints(Point3d[]) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Set the points derived from the regions of the sheet, that has the inscribed boundaries, to keep for the final
plate system shape.
- setRegionPoints(Point3d[]) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Sets the points that identify which regions of the curves will be used.
- setRegions(CaeRegion[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set regions to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setRegions(EmbossRegion[]) - Method in interface nxopen.features.EmbossBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRegionSelectCrossoverRegionFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionSelectCrossoverVerticalFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionSelection(RoughFinishTurningBuilder.RegionSelectionTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRegionSelectionPoint(Point) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRegionSelectUnknownFaces(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionSequencing(CutParametersRegionSequencingTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setRegionShowIncompleteLoops(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionShowInternalLoops(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionShowPartingEdges(boolean) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionStartAngle(double) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setRegionStartPoints(Point[]) - Method in interface nxopen.cam.NcmSubopBuilder
-
Sets region start points
License requirements: cam_base ("CAM BASE")
.
- setRegionToDeform(Section) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: None.
- setRegionType(int) - Method in interface nxopen.features.RegionListItemBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setRegionType(TrimRegionBuilder.RegionOption) - Method in interface nxopen.tooling.TrimRegionBuilder
-
License requirements: None.
- setRegionUndefinedRegionColor(NXColor) - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setRegionWidth(PartDrafting.WidthType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setReinforcementDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.BracketBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setReinforcementType(DuctReinforcementBuilder.ReinforcementTypes) - Method in interface nxopen.routing.DuctReinforcementBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setRelabelOption(LaminateRelabelPliesBuilder.RelabelOptionEnum) - Method in interface nxopen.cae.LaminateRelabelPliesBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setRelatedExpressions(NXObject[]) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Sets the related expression object
License requirements: None.
- setRelatedParts(NXObject[]) - Method in interface nxopen.issue.IssueList
-
Sets the related parts of
IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- setRelatingInterfaceTerminal(InterfaceTerminalShadow) - Method in interface nxopen.routing.InterfaceTerminalRelationshipBase
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setRelatingSingleDevice(SingleDevice) - Method in interface nxopen.routing.DeviceRelationship
-
- setRelation(CGMBuilder.RelationOption) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setRelation(PrintPDFBuilder.RelationOption) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setRelationalOperatorOption(RequirementBuilder.RelationalOperatorOptions) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setRelationalOperatorOptionOnMaximumValue(RequirementBuilder.RelationalOperatorOptions) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setRelationalOperatorOptionOnMinimumValue(RequirementBuilder.RelationalOperatorOptions) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setRelationScope(int) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setRelationScope(int) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setRelationshipType(DeviceRelationship.RelationType) - Method in interface nxopen.routing.DeviceRelationship
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setRelationshipType(InterfaceTerminalRelationshipBase.RelationType) - Method in interface nxopen.routing.InterfaceTerminalRelationshipBase
-
- setRelationType(MarkAsTemplateBuilder.RelationTypeEnum) - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRelationType(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setRelative(boolean) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setRelativeConvergence(double) - Method in interface nxopen.cae.optimization.DAOStopCondition
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setRelativeConvergenceCriteria(double) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setRelativeDateString(String) - Method in interface nxopen.visualreporting.SpecifyDateBuilder
-
License requirements: None.
- setRelativeEndBlendEndPoint(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setRelativeEndBlendStartPoint(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setRelativeLinks(DisplayableObject[]) - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
- setRelativeLinks(DisplayableObject[]) - Method in interface nxopen.motion.PackagingTraceBuilder
-
- setRelativeLocation(HoleTableSettingsLabelBuilder.RelativeLocationType) - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRelativeMotion(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRelativeNode(FENode) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setRelativePercentX(double) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setRelativePercentY(double) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setRelativeStartBlendEndPoint(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setRelativeStartBlendStartPoint(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setRelativeValueX(double) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setRelativeValueY(double) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setRelief(boolean) - Method in interface nxopen.die.PadChildBuilder
-
Sets the relief switch of the die pad, if true the relief will be built around the pad, if false it will not.
- setRelief(boolean) - Method in interface nxopen.die.PadParentBuilder
-
Sets the relief switch of die pads, if true the relief will be built around the pads, if false they will not.
- setReliefAngle(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setReliefAngle(String) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setReliefAngle(String) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setReliefAngle(String) - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setReliefAngle(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setReliefAngleType(TurnToolBuilder.ReliefAngleTypes) - Method in interface nxopen.cam.TurnToolBuilder
-
License requirements: None.
- setReliefAttributes(String, String, int) - Method in interface nxopen.die.PadChildBuilder
-
Sets the relief attributes, note existance of attributes depends on usage in
main feature.
- setReliefAttributes(String, String, int) - Method in interface nxopen.die.PadParentBuilder
-
Sets the relief attributes, note existance of attributes depends on usage in
main feature.
- setReliefAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Sets the relief attributes
License requirements: ug_die_design ("Die Design")
.
- setReliefAttributes(String, String, int) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Sets the relief attributes
License requirements: ug_die_design ("Die Design")
.
- setReliefChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReliefChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReliefDepth(double) - Method in interface nxopen.die.CastReliefParentBuilder
-
Sets the relief depth of cast relief.
- setReliefDepth(double) - Method in interface nxopen.die.PadChildBuilder
-
Sets the relief depth of the die pad.
- setReliefDepth(double) - Method in interface nxopen.die.PadParentBuilder
-
Sets the relief depth of die pads.
- setReliefDistance(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setReliefDistance(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setReliefEnabled(boolean) - Method in interface nxopen.geometricutilities.StartHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReliefPlungeDistance(double) - Method in interface nxopen.cam.TurnGrooveCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setReliefPlungeOffset(double) - Method in interface nxopen.cam.TurnGrooveCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setReliefPlungeType(TurnGrooveCornerControl.ReliefPlungeTypes) - Method in interface nxopen.cam.TurnGrooveCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setReliefSheet(Body) - Method in interface nxopen.die.CastReliefParentBuilder
-
Sets the relief sheet of cast relief.
- setReliefWidth(double) - Method in interface nxopen.die.PadChildBuilder
-
Sets the relief width of the die pad.
- setReliefWidth(double) - Method in interface nxopen.die.PadParentBuilder
-
Sets the relief width of die pads.
- setRelinkCategory(RelinkerBuilder.LinkCategory) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setRelinkOption(RelinkerBuilder.LinkOption) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setRelinkType(RelinkerBuilder.LinkType) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setRelocateParameters(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setRememberComponentState(boolean) - Method in interface nxopen.positioning.ComponentConstraintGroup
-
Sets the state which indicates if defining components are remembered when updating the member constraints.
- setRememberComponentState(boolean) - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setRemoteRenderFormat(IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderFormatType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setRemoteRenderIP(String) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setRemoteRenderSecurityToken(String) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setRemoteRenderToggle(boolean) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setRemoteRenderType(IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setRemoteRenderVideoMode(IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderVideoType) - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
- setRemoveBaseDataAttr(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataSourceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRemoveBaseDataSourceAttr(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataSourceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRemoveBlends(boolean) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setRemoveBlends(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setRemoveBlends(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setRemoveBoundary(boolean) - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling") OR nx_freeform_2 ("advanced freeform modeling")
.
- setRemoveDanglingRods(boolean) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setRemovedFacesCollector(ScCollector) - Method in interface nxopen.features.ShellBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRemoveDisconnectedRods(boolean) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setRemoveDiscontinuity(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the remove discontinuity flag.
- setRemoveExistingStock(boolean) - Method in interface nxopen.routing.FillerStockBuilder
-
Sets the remove existing stock flag.
- setRemoveExistingStock(boolean) - Method in interface nxopen.routing.StockBuilder
-
Sets the remove existing stock flag.
- setRemoveFilter(ScrapDesignBuilder.RemoveType) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRemoveGashes(boolean) - Method in interface nxopen.features.ThickenBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setRemoveHoles(boolean) - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setRemoveLimitPoints(boolean) - Method in interface nxopen.die.DieLimitsBuilder
-
License requirements: None.
- setRemoveLoops(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRemoveOpenings(boolean) - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setRemoveOpenings(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setRemoveOpenings(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setRemoveParameter(boolean) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setRemoveParameter(boolean) - Method in interface nxopen.tooling.CoolingExtendBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setRemoveParameter(boolean) - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRemoveParameter(boolean) - Method in interface nxopen.tooling.TrimSolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRemovePLCRelevantProduct(boolean) - Method in interface nxopen.ame.ProductSelectionBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setRemoveProblemVerticesOption(boolean) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRemoveSelfIntersection(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRemoveSelfIntersections(boolean) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setRemoveSelfIntersections(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRemoveSelfIntersections(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the remove self intersection flag.
- setRemoveSmallEdges(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the remove small edges flag.
- setReName(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRename(boolean) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setRename(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setRename(boolean) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setRename(boolean) - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
License requirements: None.
- setRename(boolean) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setRename(boolean) - Method in interface nxopen.tooling.InitProjectBuilder
-
License requirements: None.
- setRename(boolean) - Method in interface nxopen.tooling.MoldFillingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setRename(boolean) - Method in interface nxopen.tooling.MoldInsertBuilder
-
License requirements: None.
- setRename(boolean) - Method in interface nxopen.tooling.MoldProcessBuilder
-
License requirements: None.
- setRename(boolean) - Method in interface nxopen.tooling.SubInsertBuilder
-
License requirements: None.
- setRenameComponent(boolean) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRenameComponent(boolean) - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
License requirements: None.
- setRenameComponent(boolean) - Method in interface nxopen.tooling.EjectorTableBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setRenameComponent(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setRenameComponent(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRenameComponent(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRenameComponent(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRenameComponent(boolean) - Method in interface nxopen.tooling.SplitInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRenameComponentPartToggle(boolean) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
License requirements: None.
- setRenameComponents(boolean) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: None.
- setRenameComponents(boolean) - Method in interface nxopen.tooling.StandardPartBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR ug_die_design ("Die Design")
.
- setRenameDialog(boolean) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRenameDiaTog(boolean) - Method in interface nxopen.tooling.InitProjBuilder
-
License requirements: None.
- setRenameRule(String) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
- setRenameToggle(boolean) - Method in interface nxopen.tooling.ShimBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRenderCount(int) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the render count.
- setRenderingStyle(ShadingRenderingStyleOption) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the rendering style.
- setRenderingStyle(ViewSettingsBuilder.RenderingStyleEnum) - Method in interface nxopen.drawings.ViewSettingsBuilder
-
License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.
- setRenderingStyle(ShadingRenderingStyleOption) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRenderingStyle(ShadingRenderingStyleOption) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the rendering style.
- setRenderingStyle(View.RenderingStyleType) - Method in interface nxopen.View
-
Sets the rendering style of the view.
- setRenderMethodType(TrueStudioBuilder.RenderMethod) - Method in interface nxopen.display.TrueStudioBuilder
-
License requirements: None.
- setRenderSet(RenderSet[]) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Sets the render sets on the GENERAL tab of the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- setRenderSetObjects(Tag, int, Tag[]) - Method in interface nxopen.uf.UFDraw
-
- setRenderSetParms(Tag, UFDraw.RenderPrefs) - Method in interface nxopen.uf.UFDraw
-
- setRenderSetsForView(Tag, int, Tag[]) - Method in interface nxopen.uf.UFDraw
-
- setRenderSolidsUsingStoredFacets(boolean) - Method in interface nxopen.preferences.SessionVisualizationPerformance
-
License requirements: None.
- setRenderTrueHiddenLine(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRenderTrueHiddenLine(boolean) - Method in interface nxopen.drawings.ThreadsViewStyle
-
Sets the status of render true hidden line
License requirements: drafting ("DRAFTING")
.
- setRenderTrueHiddenLine(boolean) - Method in interface nxopen.preferences.ThreadsViewPreferences
-
Sets the status of render true hidden line
License requirements: drafting ("DRAFTING")
.
- setRenumberMethod(BcLabelManagerBuilder.RenumberType) - Method in interface nxopen.cae.BcLabelManagerBuilder
-
License requirements: None.
- setRenumberStartValue(int) - Method in interface nxopen.cae.BcLabelManagerBuilder
-
License requirements: None.
- setReorderObserver(SetList.ReorderCallback) - Method in interface nxopen.blockstyler.SetList
-
Sets the Reorder observer.
- setReorientProperties(boolean) - Method in interface nxopen.tooling.DieEngLineupBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setReorientToolHolder(boolean) - Method in interface nxopen.cam.TurningOperationBuilder
-
- setReorientToolHolder(boolean) - Method in interface nxopen.cam.TurnToolProbingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReorientToolHolderMode(TurningOperationBuilder.ReorientToolHolderModeOptions) - Method in interface nxopen.cam.TurningOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRepairingOption(DraftBodyBuilder.RepairOption) - Method in interface nxopen.features.DraftBodyBuilder
-
- setRepairPartingEdge(DraftBodyBuilder.RepairingPartingEdgeOption) - Method in interface nxopen.features.DraftBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRepairTolerance(double) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the repair tolerance.
- setReparentFrecsReferencingSeamedObject(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setRepeatTransformSetting(boolean) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setRepetition(int) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setReplaceAll(boolean) - Method in interface nxopen.annotations.ReplaceSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReplaceAll(boolean) - Method in interface nxopen.layout2d.ReplaceComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setReplaceAllComponents(boolean) - Method in interface nxopen.pdm.PartOperationBuilder
-
- setReplaceAllComponentsInSession(boolean) - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
License requirements: None.
- setReplaceAllOccurrences(boolean) - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setReplaceChannel(boolean) - Method in interface nxopen.sim.KinematicImportMcfBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setReplaceFileBrowser(String) - Method in interface nxopen.features.EmbedManagerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReplacementClassificationObjectForObject(NXObject, String, String) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The replacement object method setter
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setReplacementCode(NXObject) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder
-
Sets byte code for replacement
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setReplacementMethodForAllObjects(RoutingBulkReplacementBuilderReplacementMethodType) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The replacement method setter for all objects
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setReplacementMethodForObject(NXObject, RoutingBulkReplacementBuilderReplacementMethodType) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The replacement method setter
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setReplacementObjectIdentifierForObject(NXObject, String) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The replacement object identifier method setter
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setReplacementPart(String) - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setReplacementPartSpecificationForObject(NXObject, String) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The replacement part specification method setter
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setReplacementStatus(boolean) - Method in interface nxopen.mechatronics.ReplacePhysicsBuilder
-
Set the replacement status
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setReplaceNativeFileBrowser(String) - Method in interface nxopen.features.EmbedManagerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReplaceString(String) - Method in interface nxopen.InterpartExpressionsBuilder
-
License requirements: None.
- setReplaceString(String) - Method in interface nxopen.ReplaceExpressionsBuilder
-
License requirements: None.
- setReplaceTemplate(Part) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the replace template part
License requirements: None.
- setReplaceWith(SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes) - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
License requirements: nx_isv_mtb ("Machine Tool Builder") OR nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setReplaceWithStr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setReplayRefreshBeforeEachPath(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setReplaySpeed(int) - Method in interface nxopen.cam.DisplayPath
-
License requirements: cam_base ("CAM BASE")
.
- setReplaySpeed(int) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReplayTimestampNumber(int) - Method in interface nxopen.features.FeatureReplayBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReport(boolean) - Method in interface nxopen.features.OptimizeFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReportContext(VisualReport.ReportContextOption) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setReportContextOfVisualReport(VisualReport.ReportContextOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setReportDiscrepancies(boolean) - Method in interface nxopen.routing.CompareRunsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setReportDisplayFlattenShape(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReportDisplaySpringback(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReportDisplayStrain(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReportDisplayStress(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReportDisplayThickness(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReportDisplayViewControl(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReportFileName(String) - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setReportFilterObject(String) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReportFilterStatus(TrackDrawingChangesReportFilterBuilder.Filter, boolean) - Method in interface nxopen.drawings.TrackDrawingChangesReportFilterBuilder
-
Sets report filter status
License requirements: drafting ("DRAFTING")
.
- setReportFilterType(InspectionGraphicalReportBuilder.GraphicalReportFilterType) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReportHeader(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReportingCsys(InspectionAnalyzeOutputBuilder.ReportingCsysType) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReportingDatatypeOfRule(Rule, Property.DatatypeOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setReportingObjectType(VisualReport.ReportingObjectTypeOption) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setReportingObjectTypeOfVisualReport(VisualReport.ReportingObjectTypeOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setReportingPerType(DeviationGaugeBuilder.ReportingPerTypes) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setReportingPropertyOfRule(Rule, Property) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setReportingStyle(VisualReport.ReportingStyleOption) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setReportingStyleOfVisualReport(VisualReport.ReportingStyleOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setReportMirrorResultXML(boolean) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReportMode(Tag, int) - Method in interface nxopen.uf.UFPlist
-
- setReportName(String) - Method in interface nxopen.ame.ReportsSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setReportName(String) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReportNameOfVisualReport(String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setReportPer(int) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setReportRouteErrors(boolean) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the option to report auto/manual route errors to the listing window.
- setReportTapHoleSizeForThreadedHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReportTemplateName(String) - Method in interface nxopen.ame.ReportsSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setReportTitle(String) - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReportType(PageBuilder.Types) - Method in interface nxopen.ame.ReportsSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setReportType(PageBuilder.Types) - Method in interface nxopen.ame.ReportTemplateBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setRepositionFromCsys(CoordinateSystem) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRepositionFromCsys(CoordinateSystem) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRepositionGeometry(boolean) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setRepositionMethod(ChannelAdjustBuilder.VectorMethod) - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
License requirements: None.
- setRepositionMethod(LayoutRepositionBuilder.Method) - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
License requirements: None.
- setRepositionOption(AssyFEModel.RepositionType) - Method in interface nxopen.cae.AssyFEModel
-
Sets reposition update option
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRepositionToCsys(CoordinateSystem) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRepositionToCsys(CoordinateSystem) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRepositionType(LayoutRepositionBuilder.Type) - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
License requirements: None.
- setReProjectCurvesOption(boolean) - Method in interface nxopen.features.VarsweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRepToBaseFem() - Method in interface nxopen.cae.ModifiableFEModelOccAttribute
-
Set the representation type to base_fem
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRepToSuperElement(String) - Method in interface nxopen.cae.ModifiableFEModelOccAttribute
-
- setRequest(GraphBuilder.RequestChoices) - Method in interface nxopen.motion.GraphBuilder
-
- setRequestDescription(String[]) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Sets the description
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setRequestName(String) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setRequestType(PenetrationRequest.RequestType) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setRequestType(OverrideBuilder.RequestTypes) - Method in interface nxopen.validate.OverrideBuilder
-
License requirements: ug_checkmate ("UG Check Mate")
.
- setRequiredAttributes(CharacteristicList) - Method in interface nxopen.routing.WatertightFittingsBuilder
-
Set required attributes for Watertight Fittings.
- setRequirement(String) - Method in interface nxopen.Validation
-
License requirements: None.
- setRequirementData(FunctionObjectBuilder.RequirementData[]) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
- setRequirementDescription(String[]) - Method in interface nxopen.validate.RequirementBuilder
-
Sets the requirement description
License requirements: None.
- setRequirementMode(MeasureBuilder.RequirementType) - Method in interface nxopen.MeasureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRequirementsControl(BumperPendulumBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(CloseRangeVisibilityBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(CrashBarrierBuilder.RequirementsControlsControlType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(DynamicCurbBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(GroundClearanceBuilder.RequirementControls) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(HeadImpactBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(InnerAngleBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(OilPanBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(SlopeBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(StaticCurbBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(WheelCoveringBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementsControl(WheelFixingBuilder.RequirementsControlType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRequirementTolerance(double) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setRequirementTypeOption(RequirementBuilder.RequirementTypeOptions) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setReselTargetData(boolean) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
License requirements: None.
- setResetComponentDisplay(PartCleanup.ResetComponentDisplayAction) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to remove assembly-specific
geometry in component parts.
- setResetPosture() - Method in interface nxopen.features.HumanBuilder
-
Set flag for reset posture
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setResetSegment() - Method in interface nxopen.features.HumanBuilder
-
Set flag for reset segment
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setResize(boolean) - Method in interface nxopen.uistyler.DialogItem
-
Specifies wether dialog is allowed to resize
License requirements: None.
- setResizeAllDirections(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setResizedEndDistance(double) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setResizeDuringUpdate(boolean) - Method in interface nxopen.features.DatumPlaneBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setResizeDuringUpdate(boolean) - Method in interface nxopen.features.ResizePlaneBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setResizeHeightWithDialog(boolean) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setResizeHeightWithDialog(boolean) - Method in interface nxopen.blockstyler.MultilineString
-
License requirements: None.
- setResizeHeightWithDialog(boolean) - Method in interface nxopen.blockstyler.ScrolledWindow
-
License requirements: None.
- setResizeHeightWithDialog(boolean) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setResizeMethod(PmiResizeMethod) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setResizeOnCreate(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setResizeOnViewSave(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setResizeOption(SheetElementBuilder.ResizeOptionType) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setResizeRadius(boolean) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setResizeRadius(boolean) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setResolution(ViewCreationWizardBuilder.ResolutionOption) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setResolution(MultiPatchAlignmentBuilder.ResolutionType) - Method in interface nxopen.facet.MultiPatchAlignmentBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setResolution(ReflectionDataBuilder.ResolutionType) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setResolution(HighlightLinesAnalysisBuilder.Resolutions) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setResolution(PartVisualizationShade.AdvViewToleranceType) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
-
License requirements: None.
- setResolution(ListCreator.ResolutionType) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setResolution(SessionVisualizationHighQualityImage.ResolutionType, int) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage
-
Specifies the resolution to use when generating a High Quality Image.
- setResolutionDeg(double) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the degree resolution value
License requirements: None.
- setResolutionDensityType(CfdLocalResolutionConstraintBuilder.ResolutionDensity) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setResolutionMm(double) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the millimeter resolution value
License requirements: None.
- setResolveOverlap(SimBcPlotContoursBuilder.ResolveOverlapType) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setResolveOverlapValue(double) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setResolveOverlapValueUnit(Unit) - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setResolveRule(ConflictResolutionBuilder.Rule) - Method in interface nxopen.cae.ConflictResolutionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setResolveRule(ConstraintResolutionBuilder.Rule) - Method in interface nxopen.cae.ConstraintResolutionBuilder
-
- setResponse(String) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the string to define response direction sense
License requirements: None.
- setResponse(Response) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResponse(Response) - Method in interface nxopen.cae.optimization.DAOObjective
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResponse(int) - Method in interface nxopen.features.UserDefinedFeatureEditEvent
-
License requirements: None.
- setResponseCoordinateSystem(CoordinateSystem) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResponseDomainDefinitionOption(ResponseDomainDefinitionMethod) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResponseElementDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResponseElements(FEElement[]) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Set the response elments.
- setResponseId(int) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the ID of response element or node
License requirements: None.
- setResponseNodeDataComponent(DirectionDataComponent) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResponseNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
Set the response nodes.
- setResponseType(DDAMExcitation.ResponseType) - Method in interface nxopen.cae.responsesimulation.DDAMExcitationBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResponseType(DDAMExcitation.ResponseType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResponseTypeOption(DDAMComponentData.ResponseType) - Method in interface nxopen.cae.responsesimulation.DDAMComponentData
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResponseUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResponseUsingUserDefinedDirection(NodalFunctionEvalRequest) - Method in interface nxopen.cae.responsesimulation.CsdEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setRespositionExisting(boolean) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRestartIDNumbersWithNewReport(boolean) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRestartNumbers(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setRestitution(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setRestoreOption(boolean) - Method in interface nxopen.features.PatternFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setRestorePosition(boolean) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRestrictCrosshatch(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setRestrictCrosshatchAngle(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setRestrictCrosshatchAngle(boolean) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets
License requirements: drafting ("DRAFTING")
.
- setRestrictCrosshatchAngle(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRestrictCrosshatchAngle(boolean) - Method in interface nxopen.preferences.SectionViewPreferences
-
Sets the status of restrict crosshatch angle.
- setRestrictThicknessToMaterial(boolean) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setResult(Result) - Method in interface nxopen.cae.CreateJtBuilder
-
The result
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResult(Result) - Method in interface nxopen.cae.PostJtExportBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResult(Result) - Method in interface nxopen.cae.ResultsModelExportBuilder
-
The result the model of which is to be exported
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResult(Result) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResult(Result, ResultParameters[], String[]) - Method in interface nxopen.cae.TransientResultsReductionBuilder
-
The result types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultantCurveLocator(QueryCurveUsageOptions.ResultantCurveLocatorType) - Method in interface nxopen.cae.QueryCurveUsageOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResultantLocationTolerance(double) - Method in interface nxopen.cae.QueryCurveUsageOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResultBeamSection(Result.Section) - Method in interface nxopen.cae.ResultParameters
-
Set section where beam results are defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResultBlankShape(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets blank shape result.
- setResultCategory(ComparisonResult.Category) - Method in interface nxopen.mechatronics.ComparisonResult
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setResultComponent(Result.Component) - Method in interface nxopen.cae.CrossSectionParameters
-
Set result component
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResultComponent(Result.Component) - Method in interface nxopen.cae.ResultParameters
-
Set result component
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResultDataLocation(Result.Location) - Method in interface nxopen.cae.ResultParameters
-
- setResultDataQuantity(Result.Quantity) - Method in interface nxopen.cae.ResultParameters
-
- setResultDataSection(Result.Section) - Method in interface nxopen.cae.ResultParameters
-
- setResultFile(String) - Method in interface nxopen.cae.ImportedSolutionBuilder
-
The result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultFileFolder(String) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setResultFileNames(String[]) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Set all the result files of the analysis result.
- setResultFileUnits(Unit[]) - Method in interface nxopen.cae.SimResultReference
-
Set result file units
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultFileUnits(Unit[]) - Method in interface nxopen.cae.SimSolution
-
- setResultFilteringOption(TBSSmoothBuilder.ResultFiltering) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setResultMeasure(ResultMeasure) - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultMeasure(ResultMeasure) - Method in interface nxopen.cae.optimization.DAOObjective
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultName(String) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setResultName(String) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setResultName(String) - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setResultNodesIdsOnProfile(int[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets profile node ID result.
- setResultNodesNumEachProfileCurve(int[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets total number of node on each profile.
- setResultOption(AxiSymmetricParameters.GetResult) - Method in interface nxopen.cae.AxiSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResultOption(CyclicSymmetricParameters.GetResult) - Method in interface nxopen.cae.CyclicSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResultProbes(ResultProbe[]) - Method in interface nxopen.cae.GraphFromResultProbeBuilder
-
The plot type will be set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultReference(SimResultReference) - Method in interface nxopen.cae.AlternateFemRepresentationSourceBuilder
-
Sets the result reference
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultReferenceType(SimResultReference.Type) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultRefNodeId(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets reference node ID.
- setResults(Result[]) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the result index for which annotation is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResults(Result[], ResultParameters[]) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
The results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResults(int[], Result[], ResultParameters[]) - Method in interface nxopen.cae.ResultsEnvelopeBuilder
-
The results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResults(Result[], ResultParameters[], String[]) - Method in interface nxopen.cae.ResultsReductionBuilder
-
The result types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResults(UncutRegionsBuilder.ResultsType) - Method in interface nxopen.die.UncutRegionsBuilder
-
License requirements: None.
- setResultsAutoUpdate(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setResultShellSection(Result.Section) - Method in interface nxopen.cae.ResultParameters
-
Set section where shell results are defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResultsOption(FlowDisplayBuilder.AnalysisResults) - Method in interface nxopen.tooling.FlowDisplayBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setResultSourceTag(NXObject) - Method in interface nxopen.cae.DurabilityEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setResultSpringBack(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets springback result.
- setResultStatus(FeatureProcessBuilderStatus.ResultStatus) - Method in interface nxopen.FeatureProcessBuilderStatus
-
Sets a result status code for a feature process builder.
- setResultStrain(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets strain result.
- setResultStress(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets stress result.
- setResultThickness(double[]) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets thickness result.
- setResultType(BaseResultType) - Method in interface nxopen.cae.PostJtExportBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setResultType(EvaluationResultType) - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResultType(EvaluationResultType) - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResultType(StrainGageResult) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setResultType(Result.Type) - Method in interface nxopen.cae.ResultParameters
-
- setResultType(Result.Quantity) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultType(SpringbackCompensationBuilder.ResultSheetType) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setResultType(ResultMeasure.ResultType) - Method in interface nxopen.motion.ResultMeasureBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setResultTypeName(String) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set result type name that will be displayed in postview
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultTypes(BaseResultType[], String[]) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
The result types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultTypes(BaseResultType[], String[], Unit[]) - Method in interface nxopen.cae.ResultsCombinationBuilder
-
The result types
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setResultUnit(Unit) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set result unit for given result type/dependent field variable type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setRetainAnnotations(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flag indicating whether to retain
Annotation
objects
when the geometry they are attached to is deleted.
- setRetainCollector(boolean) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRetainCollector(boolean) - Method in interface nxopen.cae.ElementRevolveBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRetainColorFontWidth(int, int, int) - Method in interface nxopen.uf.UFDrf
-
- setRetainDimensions(boolean) - Method in interface nxopen.preferences.SessionSketch
-
- setRetainedState(UFDrf.RetainedState) - Method in interface nxopen.uf.UFDrf
-
- setRetainElementType(boolean) - Method in interface nxopen.cae.ElementTypeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRetainFidelityCheckingInformation(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the retain fidelity checking information flag for I-DEAS
License requirements: None.
- setRetainRecipeFlag(boolean) - Method in interface nxopen.cae.AutoBCBuilder
-
License requirements: None.
- setRetainStringValue(boolean) - Method in interface nxopen.blockstyler.FileSelection
-
License requirements: None.
- setRetainStringValue(boolean) - Method in interface nxopen.blockstyler.FolderSelection
-
License requirements: None.
- setRetainTarget(boolean) - Method in interface nxopen.features.BooleanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRetainTool(boolean) - Method in interface nxopen.features.BooleanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.DoubleTable
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.IntegerTable
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.MultilineString
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.ObjectColorPicker
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.RGBColorPicker
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.TabControl
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.Table
-
License requirements: None.
- setRetainValue(boolean) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setRetDistChanged(boolean) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Flag indicating whether retract distance changed.
- setRetDistChanged(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Flag indicating whether retract distance changed.
- setRetiringFlag(int) - Method in interface nxopen.uf.UF
-
- setRetract(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setRetractDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRetractDistance(double) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRetractOutputMode(HoleDrillingBuilder.RetractOutputModeType) - Method in interface nxopen.cam.HoleDrillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRetractPoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRetractPointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRetractPointToolAxis(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRetractSpeedToggle(int) - Method in interface nxopen.cam.FeedsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRetractType(NcmLaserRetract.Type) - Method in interface nxopen.cam.NcmLaserRetract
-
License requirements: cam_base ("CAM BASE")
.
- setRetractValue(double) - Method in interface nxopen.cam.CycleStepRetract
-
License requirements: cam_base ("CAM BASE")
.
- setReturnColor(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setReturnDeltaAngle(double) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnDeltaDistance(double) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnDeltaVector(NXObject) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnDeltaX(double) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnDeltaY(double) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnFlag(ProbeProtectedParametersBuilder.DepMethodTypes) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnMoveMode(TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnMoveOption(TurnRoughFinishTestCut.ReturnMoveTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setReturnMovePoint(Point) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setReturnPoint(Point) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnPointMode(TurnAvoidanceReturnBuilder.ReturnPointModes) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnPointMotionType(TurnAvoidanceReturnBuilder.ReturnPointMotionTypes) - Method in interface nxopen.cam.TurnAvoidanceReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReturnStart(double) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setReturnStartAngle(double) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReturnStartAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReturnStop(double) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setReturnStopAngle(double) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReturnStopAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReusablePartBuilder(TaggedObject) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setReusablePocketBuilder(ReusablePocketBuilder) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the reusable pocket builder
License requirements: None.
- setReusablePocketBuilder(ReusablePocketBuilder) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the reusable pocket builder
License requirements: None.
- setReuseBuilder(int, FastenerAssy.StackTypeMethod, int, Component) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the reuse builder
License requirements: None.
- setReuseFeaturesMethod(JointmarkBuilder.ReuseMethod) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setReuseLibraryOperator(EditClauseBuilder.Operator) - Method in interface nxopen.ame.EditClauseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setReuseMatchTolerance(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setReusePieChartBuilder(ReusePieChartBuilder) - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Set pie chart builder
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setReversalMode(RoughTurningBuilder.ReversalModeTypes) - Method in interface nxopen.cam.RoughTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReverse(int) - Method in interface nxopen.die.DieLimitsBuilder
-
License requirements: None.
- setReverse(boolean) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setReverse(boolean) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setReverse(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setReverse(boolean) - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setReverseAnchorPoint(boolean) - Method in interface nxopen.die.AddendumSectionUserDefinedBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setReverseArrowDirection(boolean) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the flag indicating whether the Reverse Arrow Direction is set on dimension or not
License requirements: None.
- setReverseArrowDirection(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Sets the reverse arrow direction flag
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setReverseAttachmentDirection(boolean) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setReverseAxis(boolean) - Method in interface nxopen.SketchAlongPathBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setReverseAxis(boolean) - Method in interface nxopen.SketchInPlaceBuilder
-
- setReverseBendAngle(boolean) - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setReverseBendDirection(boolean) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReverseBendDirection(boolean) - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReverseBoundary1Direction(boolean) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseBoundary2Direction(boolean) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseCurveDirection(boolean) - Method in interface nxopen.geometricutilities.ModlAlongCurveAngle
-
License requirements: None.
- setReversed(boolean) - Method in interface nxopen.assemblies.Order
-
Sets the reverse state of the
Order
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX9.0.0
- setReversed(boolean) - Method in interface nxopen.cam.CycleSpindle
-
License requirements: cam_base ("CAM BASE")
.
- setReverseDepthDirection(boolean) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseDepthDirection(boolean) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseDir(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReverseDirection(boolean) - Method in interface nxopen.cae.MMCCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setReverseDirection(boolean) - Method in interface nxopen.cae.QueryCurveUsageOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setReverseDirection(boolean) - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReverseDirection(boolean) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanArcBuilder
-
License requirements: None.
- setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: None.
- setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
License requirements: None.
- setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReversedirection(boolean) - Method in interface nxopen.cam.InspectionScanLineBuilder
-
License requirements: None.
- setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setReverseDirection(boolean) - Method in interface nxopen.drawings.HingeLineBuilder
-
License requirements: None.
- setReverseDirection(boolean) - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setReverseDirection(boolean) - Method in interface nxopen.facet.LocalOffsetBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.AdaptiveShellBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.AdmOffsetRegionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.CopyFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.CutFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.CylinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.DatumAxisBuilder
-
Sets
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.HoleFeatureBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.MatchedReferenceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.OffsetCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.OffsetEmbossBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.OffsetFacetBodyBuilder
-
License requirements: None.
- setReverseDirection(boolean) - Method in interface nxopen.features.OffsetRegionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.PatchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.ReplaceFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
- setReverseDirection(boolean) - Method in interface nxopen.features.ThickenBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.VariableOffsetBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setReverseDirection(boolean) - Method in interface nxopen.features.WaveDatumBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseDirection(int) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setReverseDirection(boolean) - Method in interface nxopen.geometricutilities.BooleanToolBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseDirection(boolean) - Method in interface nxopen.geometricutilities.LawBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setReverseDirection(boolean) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setReverseDirection(boolean) - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Sets the reverse direction flag.
- setReverseDirection(boolean) - Method in interface nxopen.tooling.CoolingExtendBuilder
-
License requirements: None.
- setReverseDirection(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setReverseDirection(boolean) - Method in interface nxopen.tooling.OffsetCurve3DBuilder
-
- setReverseDirection(boolean) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setReverseDirection(boolean) - Method in interface nxopen.weld.JointmarkGuideBuilder
-
License requirements: ugweld ("UG WELD")
.
- setReverseDirection1(boolean) - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseDirection1(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReverseDirection2(boolean) - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseDirection2(boolean) - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReverseDirection3(boolean) - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseDirectionLength(boolean) - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setReverseDirectionOffset(boolean) - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setReverseEdgeDirection(boolean) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseEnd(boolean) - Method in interface nxopen.routing.HealPath
-
Sets the reverse end end.
- setReverseEndDirection(boolean) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setReverseEndOffset(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseEndOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReverseEndOffset0Direction(boolean) - Method in interface nxopen.geometricutilities.CurveLengthBuilder
-
License requirements: None.
- setReverseEndOffset1Direction(boolean) - Method in interface nxopen.geometricutilities.CurveLengthBuilder
-
License requirements: None.
- setReverseEndSurface(boolean) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setReverseExtendDirection(boolean) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Reverses surface extend direction
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReverseExtendDirection(boolean) - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Reverses surface extend direction
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- setReverseFaceDirection(boolean) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setReverseFaceNormal(boolean) - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseFirstFaceNormal(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: None.
- setReverseFixedSegment(boolean) - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setReverseFoldRotationAngle(boolean) - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setReverseGuideOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReverseHeightDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseHeightOffsetDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseInsertDirection(boolean) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReverseLimit1OffsetDirection(boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseLimit1OffsetDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseLimit2OffsetDirection(boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseLimit2OffsetDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseLine1Offset(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseLine1Offset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReverseLine2Offset(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseLine2Offset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReverseMainRun(boolean) - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setReverseMetalThickness(boolean) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReverseMotionSide(boolean) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseNeedles(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setReverseNormal(int) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Sets the reverse normal setting of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- setReverseNormal(int) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Sets the reverse normal setting of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- setReverseNormal(int) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseNormal(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setReverseNormal1(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setReverseNormal2(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setReverseNormalDirection(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setReverseNormalDirection(boolean) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: None.
- setReverseNormalDirection(boolean) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setReverseNormalFlag(boolean) - Method in interface nxopen.geometricutilities.FaceSetData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseOffset(boolean) - Method in interface nxopen.features.RibbonBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseOffsetDirection(boolean) - Method in interface nxopen.features.OffsetEdgeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseOffsetDirection(boolean) - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setReverseOffsetDirection(boolean) - Method in interface nxopen.features.RibBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseOffsetDirection(boolean) - Method in interface nxopen.weld.WeldBeadPathBuilder
-
License requirements: ugweld ("UG WELD")
.
- setReverseOffsets(boolean) - Method in interface nxopen.features.ChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseOffsetSide(boolean) - Method in interface nxopen.features.OffsetEdgeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseOrientation(boolean) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Sets the value to reverse the orientation of the core plane,
if true the handling core orientation normal will be reversed,
if false it will not.
- setReverseOrientation(boolean) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the value to reverse the orientation of the orientation plane,
if true the keyway orientation normal will be reversed,
if false it will not.
- setReverseOrientation(boolean) - Method in interface nxopen.die.PadChildBuilder
-
Sets the value to reverse the orientation of the orientation plane,
if true the pad orientation normal will be reversed,
if false it will not.
- setReverseOrientationDirection(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseOrientationDirection(boolean) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setReverseOverlap(boolean) - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setReversePathDirection(boolean) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setReversePlaneNormal(boolean) - Method in interface nxopen.SketchAlongPathBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setReversePlaneNormal(boolean) - Method in interface nxopen.SketchInPlaceBuilder
-
- setReversePropagation(boolean) - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setReverseReferenceDirection(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseReferenceDirection(boolean) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setReverseReflectData(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReverseReflectTraceCurve(boolean) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setReverseRibDirection(boolean) - Method in interface nxopen.features.RibBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseSecondaryDirection(boolean) - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setReverseSecondFaceNormal(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: None.
- setReverseSection(boolean) - Method in interface nxopen.DatumPlane
-
Sets the reverse section flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseSection(boolean) - Method in interface nxopen.IPlane
-
Sets the reverse_section
License requirements: None.
- setReverseSeedDirection(boolean) - Method in interface nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setReverseSeedNormal(boolean) - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setReverseSeries(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setReverseSheetNormal(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setReverseSide(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReverseSide(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setReverseSide(boolean) - Method in interface nxopen.features.Offset3DCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseSide(boolean) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setReverseSide(boolean) - Method in interface nxopen.IPlane
-
Sets the reverse side
License requirements: None.
- setReverseSide(boolean) - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setReverseSourceDirection(boolean) - Method in interface nxopen.die.DieDirectionBuilder
-
License requirements: None.
- setReverseSourceDirection(boolean) - Method in interface nxopen.die.DiePlaneBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setReverseSplitDirection(boolean) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setReverseStart(boolean) - Method in interface nxopen.routing.HealPath
-
Sets the reverse start end.
- setReverseStartDirection(boolean) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setReverseStartDirection(boolean) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setReverseStartDirection(boolean) - Method in interface nxopen.features.SpineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseStartOffset(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setReverseStartOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setReverseSubdividePoint(boolean) - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setReverseSurfaceDirection(boolean) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseTaperDirection(boolean) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
- setReverseTarget(boolean) - Method in interface nxopen.features.PasteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseTarget(boolean) - Method in interface nxopen.features.TrimAndExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseThicknessDirection(boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseThicknessDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseThicknessDirection(boolean) - Method in interface nxopen.features.RibBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseThicknessDirection(boolean) - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReverseThicknessOffsetDirection(boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseThicknessOffsetDirection(boolean) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseThirdFaceNormal(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: None.
- setReverseTool(boolean) - Method in interface nxopen.features.PasteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setReverseTool(boolean) - Method in interface nxopen.features.TrimAndExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setReverseTransformation(boolean) - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setReverseTransformation(boolean) - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setReverseTransformation(boolean) - Method in interface nxopen.FlatteningBuilder
-
- setReverseTrimDirection(boolean) - Method in interface nxopen.tooling.SplitSolidBuilder
-
License requirements: None.
- setReverseTrimSide(boolean) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the reverse trim side setting of the steel insert.
- setReverseTrimSide(boolean) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the reverse trim side setting of the trim task.
- setReverseTrimSide(boolean) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setReverseU(boolean) - Method in interface nxopen.SurfaceUVDirectionBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setReverseV(boolean) - Method in interface nxopen.SurfaceUVDirectionBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setReverseValue(int) - Method in interface nxopen.routing.AssignCornerBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setReverseWidth1Direction(boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseWidth2Direction(boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseWidthDirection(boolean) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseWidthOffsetDirection(boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setReverseWindDirection(boolean) - Method in interface nxopen.routing.WindCatcherBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setReversible(boolean) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setReviewDecisions(int) - Method in interface nxopen.features.shipdesign.PenetrationReviewRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setReviewSection(boolean) - Method in interface nxopen.features.VarsweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRevision(String) - Method in interface nxopen.annotations.BalloonNoteBuilder
-
License requirements: None.
- setRevision(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setRevision(String) - Method in interface nxopen.annotations.GeneralNoteBuilder
-
License requirements: None.
- setRevision(String) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
- setRevision(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
License requirements: None.
- setRevision(String) - Method in interface nxopen.annotations.PartIdentificationBuilder
-
License requirements: None.
- setRevision(String) - Method in interface nxopen.annotations.ProcessSpecificationBuilder
-
License requirements: None.
- setRevision(String) - Method in interface nxopen.annotations.RevisionBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setRevision(String) - Method in interface nxopen.annotations.SpecificNoteBuilder
-
License requirements: None.
- setRevision(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
- setRevision(String) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setRevision(String) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRevision(String) - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setRevisionAttr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setRevisionID(String) - Method in interface nxopen.mechatronics.ObjectInformationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setRevisionRule(String) - Method in interface nxopen.assemblies.SubsetConfigurationBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setRevisionRule(String) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setRevisionRule(String) - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setRevisionRule(String) - Method in interface nxopen.validate.RequirementCollection
-
License requirements: None.
- setRevisionRule(String) - Method in interface nxopen.ValidationCollection
-
- setRevisionString(String) - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setRevMethod(InspectionCmmCommandBuilder.RevMethods) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRevName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRevolutionGeometryData(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRevolutionGeometryDataFile(String) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRevolutionMaterialSide(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRevolutions(double) - Method in interface nxopen.cam.CutDwell
-
License requirements: cam_base ("CAM BASE")
.
- setRevolutions(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRevolveAngle(double) - Method in interface nxopen.cae.AxiSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setRevUp(boolean) - Method in interface nxopen.uf.UFClone
-
- setRHLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRHLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRho(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
- setRho(double) - Method in interface nxopen.SketchConicBuilder
-
License requirements: None.
- setRhoOption(AestheticFaceBlendBuilder.RhoType) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setRhoOption(ConicCrossSection.RhoMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRhoType(FaceBlendBuilder.RhoMethod) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRhoValue(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setRhoValue(double) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setRHRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRHRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRibbonVis(UFVariant, int) - Method in interface nxopen.uf.UFUi
-
- setRibCapGeometryOption(RibBuilder.RibCapGeometryOptions) - Method in interface nxopen.features.RibBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRibDraftOption(RibBuilder.RibDraftOptions) - Method in interface nxopen.features.RibBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRibForm(AeroRibBuilder.RibForms) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: None.
- setRibMaxArea(double) - Method in interface nxopen.cae.RemoveRibsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRibMaxElem(int) - Method in interface nxopen.cae.RemoveRibsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRibMinBoundaryNodeRatio(int) - Method in interface nxopen.cae.RemoveRibsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRibSupportWidth(String) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setRibSupportWidth(String) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setRibThicknessOffsetOption(RibBuilder.RibThicknessOffsetOptions) - Method in interface nxopen.features.RibBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRibType(RibBuilder.RibTypes) - Method in interface nxopen.features.RibBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRichText(String[]) - Method in interface nxopen.cam.WorkInstructionBuilder
-
Sets the multi line text
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setRightBorder(RenderingPropertiesBuilder) - Method in interface nxopen.diagramming.tables.CellBuilder
-
License requirements: None.
- setRightDialogItem(String) - Method in interface nxopen.uistyler.Attachment
-
Sets the right dialog item
License requirements: None.
- setRightDistance(double) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setRightEyeColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRightEyeDownColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRightEyeUpColor(NXColor) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRightHandSide(String) - Method in interface nxopen.Expression
-
License requirements: None.
- setRightMargin(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setRightMargin(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setRightOffset(int) - Method in interface nxopen.uistyler.Attachment
-
Sets the right offset
License requirements: None.
- setRightTrimmedMargin(double) - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
License requirements: None.
- setRightTrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRightUntrimmedMargin(double) - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
License requirements: None.
- setRightUntrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRightView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRigid(boolean) - Method in interface nxopen.features.GroupFaceBuilder
-
License requirements: None.
- setRigidBodyTolerance(double) - Method in interface nxopen.cae.ModelUpdateOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setRigidData(FEElement, CaeElementAssociatedDataUtilsDof[]) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets rigid element associated data.
- setRigidLink(Link) - Method in interface nxopen.motion.LoadTransferControl
-
Sets rigid link
License requirements: mechanisms ("MECHANISMS")
.
- setRigidSetConstraintOption(SessionSketch.RigidSetConstraintType) - Method in interface nxopen.preferences.SessionSketch
-
- setRimOffset(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRimRoadGlobal(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRimRoadTydexW(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRimTydexCH(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRipEdges(Edge[]) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Sets the array of edges that need to be ripped while converting to sheetmetal.
- setRipEdges(Edge[]) - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder
-
Edges to rip
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setRipSection(Section) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Sets the section containing curves that need to be ripped while converting to sheetmetal.
- setRmsError(double) - Method in interface nxopen.cae.AfuMathFastRMSOutput
-
Returns the rms error
License requirements: None.
- setRoadGlobal(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRoadHeightAdjustment(LmsSolverProperty.RoadHeightAdjustmentTypes) - Method in interface nxopen.motion.LmsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setRoadObject(Road) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRoadType(RoadBuilder.TypeChoices) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRockerAxisDirection(Axis) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRockerCamDirection(Direction) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRodType(HydraulicCylinderBuilder.OutputRodType) - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setRodType(PneumaticCylinderBuilder.OutputRodType) - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setRole(String) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setRollingRadiusType(TirePropertyAdvancedParameters.RollingType) - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setRollMoment(boolean) - Method in interface nxopen.motion.TirePropertyHighOrderParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setRollOntoEdge(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRolloverDelay(int) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setRollOverSmoothEdge(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRollToolOverEdges(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setRoomNamePrefix(String) - Method in interface nxopen.features.shipdesign.RoomContainerBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setRoomPurpose(String) - Method in interface nxopen.features.shipdesign.RoomAttributeListBuilder
-
Sets the room purpose.
- setRootLine(NXObject) - Method in interface nxopen.cam.ThreadTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRootOpening(double) - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setRootOpening(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setRootOpening(double) - Method in interface nxopen.weld.JointExitBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setRootOpening(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setRootPart(Part) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Make part root part and work part
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setRootPart(BasePart) - Method in interface nxopen.shipdesign.Navigator
-
Sets root part to load navigator model.
- setRootPenetration(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setRootPenetration(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setRootUpdate(WeldRootUpdate) - Method in interface nxopen.weld.GrooveBuilder
-
- setRotary1(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setRotary2(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setRotary3(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setRotary4(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setRotary5(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setRotary6(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setRotaryCurveType(UserDefinedMotionBuilder.RotaryCurveTypes) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRotaryDirection(Axis) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRotaryMaxAngleLimit(double) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setRotaryMinAngleLimit(double) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setRotaryMotionAxis(Axis) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRotate(RotateAngleOption) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setRotate(double) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setRotateAbout(ToolAxisAdvanced.RotateAboutType) - Method in interface nxopen.cam.ToolAxisAdvanced
-
License requirements: cam_base ("CAM BASE")
.
- setRotateAngle(double) - Method in interface nxopen.cam.SplitSubopCommand
-
License requirements: None.
- setRotateAngleDouble(double) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setRotateAngleDouble(double) - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Sets the rotate angle double
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setRotateCenter(Point) - Method in interface nxopen.facet.BestFitAlignBuilder
-
Sets the rotation center
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setRotateCsys(CoordinateSystem) - Method in interface nxopen.motion.LinkInitialVelocity
-
License requirements: mechanisms ("MECHANISMS")
.
- setRotateDirection(Direction) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRotateDisplayTextFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the text of the BC is
rotated in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setRotateMirrorFace(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRotateOption(RotateAngleOption) - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setRotatePoint(Point) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setRotatePoint(Point) - Method in interface nxopen.tooling.LayoutRepositionBuilder
-
License requirements: None.
- setRotateTableAngle(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotateTableAngularDeviation(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotateTableDirection(InspectionAlignmentBuilder.RotateTableDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotateTableFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotateTableMethod(InspectionAlignmentBuilder.RotateTableMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotateTableName(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotateTablePcsUpdateOption(InspectionAlignmentBuilder.RotateTablePcsUpdateOptions) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotateTrackingPoint(boolean) - Method in interface nxopen.cam.TurningOperationBuilder
-
- setRotateType(LinkInitialVelocity.AngularVelocityType) - Method in interface nxopen.motion.LinkInitialVelocity
-
License requirements: mechanisms ("MECHANISMS")
.
- setRotateVector(Axis) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setRotateVector(Direction) - Method in interface nxopen.motion.LinkInitialVelocity
-
License requirements: mechanisms ("MECHANISMS")
.
- setRotatingArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setRotatingArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setRotatingAxis(StudioXformBuilderEx.RotatingAxisType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setRotatingPivot(StudioXformBuilder.RotatingPivotType) - Method in interface nxopen.features.StudioXformBuilder
-
- setRotatingPivot(StudioXformBuilderEx.RotatingPivotType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setRotatingPivotPoint(Point) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setRotation(HoleBossGeom.RotationTypes) - Method in interface nxopen.cam.HoleBossGeom
-
License requirements: cam_base ("CAM BASE")
.
- setRotation(double) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setRotation(double) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setRotation(PlotBuilder.RotationOption) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setRotation(Tag, double[]) - Method in interface nxopen.uf.UFView
-
- setRotationalComponentEndA(DamperEADBuilder.RotationalComponentEnd) - Method in interface nxopen.cae.DamperEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRotationalComponentEndA(SpringEADBuilder.RotationalComponentEnd) - Method in interface nxopen.cae.SpringEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRotationalComponentEndB(DamperEADBuilder.RotationalComponentEnd) - Method in interface nxopen.cae.DamperEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRotationalComponentEndB(SpringEADBuilder.RotationalComponentEnd) - Method in interface nxopen.cae.SpringEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRotationAllowed(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the options of allowing rotation.
- setRotationAngle(double) - Method in interface nxopen.cae.PostSelectionEntity
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setRotationAngle(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotationAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setRotationAngle(DynamicSectionTypes.Axis, double) - Method in interface nxopen.display.DynamicSectionBuilder
-
Rotates the section about specified axis by the specified angle.
- setRotationAngle(double) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setRotationAngle(double) - Method in interface nxopen.formboard.FlipComponentBuilder
-
Set the angle to rotate the component.
- setRotationAngle(double) - Method in interface nxopen.routing.Stock
-
Sets the rotation angle applied to the profile.
- setRotationAngle(double) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRotationAngleReverseDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRotationAngleType(GlobalShapingBuilder.RotationMethod) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRotationArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilder
-
- setRotationArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilder
-
- setRotationAxis(AxiSymmetricParameters.AxisOfRotation) - Method in interface nxopen.cae.AxiSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setRotationAxis(TranslationalNodalFunctionExcitationBuilder.RotationAxisType) - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setRotationAxis(InspectionAlignmentBuilder.RotationAxisOptions) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotationAxis(Direction) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setRotationAxis(Axis) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRotationAxis(RadialBuilder.RotationAxisType) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setRotationAxis(Axis) - Method in interface nxopen.geometricutilities.CircularPattern
-
License requirements: None.
- setRotationAxis(Axis) - Method in interface nxopen.geometricutilities.HelixPattern
-
License requirements: None.
- setRotationAxis(Axis) - Method in interface nxopen.geometricutilities.PolygonPattern
-
License requirements: None.
- setRotationAxisColor(NXColor) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRotationAxisDisplaySwitch(boolean) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRotationAxisFont(ModelDisplayBuilder.RotationAxisLineFont) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRotationAxisLineWidth(ModelDisplayBuilder.RotationAxisWidth) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRotationAxisOfAbsoluteCyndricalCSYS(Post.AxisymetricAxis) - Method in interface nxopen.cae.ResultParameters
-
Set axis of rotation for axisymmetric results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setRotationCenter(Point) - Method in interface nxopen.geometricutilities.CircularPattern
-
License requirements: None.
- setRotationCenter(Point) - Method in interface nxopen.geometricutilities.PolygonPattern
-
License requirements: None.
- setRotationDatumLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotationDirection(InspectionAlignmentBuilder.RotationDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotationDirection(StudioXformBuilder.RotationDirectionType) - Method in interface nxopen.features.StudioXformBuilder
-
- setRotationFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotationMatrix(DynamicSectionTypes.Axis, Matrix3x3) - Method in interface nxopen.display.DynamicSectionBuilder
-
- setRotationMethod(InspectionAlignmentBuilder.RotationMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRotationObject(DisplayableObject) - Method in interface nxopen.routing.IAxisPort
-
Sets the object used to derive the rotation vector of Port
License requirements: routing_base ("Routing Basic")
.
- setRotationPlane(Xform) - Method in interface nxopen.drawings.OrientationViewStyle
-
Sets the rotation plane.
- setRotationPoint(Point) - Method in interface nxopen.drawings.RevolvedSectionLineBuilder
-
- setRotationPoint(Point) - Method in interface nxopen.drawings.SectionLineSegmentsBuilder
-
License requirements: None.
- setRotationPointDelay(int) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
Sets
License requirements: None.
- setRotationSpeedValue(double) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setRotationSymbolType(RotationSymbolTypes) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRotationSymbolType(RotationSymbolTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRotationTranslationScale(Matrix3x3, Point3d, double) - Method in interface nxopen.View
-
Sets the rotation, translation and scale of the specified view.
- setRotationType(GlobalShapingBuilder.RotationMethodType) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setRotationType(DriverMotionsData.DriverRotationType) - Method in interface nxopen.motion.DriverMotionsData
-
License requirements: mechanisms ("MECHANISMS")
.
- setRotationVector(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setRotationVector(Vector3d) - Method in interface nxopen.routing.IAxisPort
-
Sets the rotation vector of Port
License requirements: routing_base ("Routing Basic")
.
- setRotationXDirection(Direction) - Method in interface nxopen.drawings.OrientationViewStyle
-
Sets the rotation in x-direction for the drawing member view which stays
parallel to the x-axis drawing coordinate.
- setRotorAttributes(String, String, int) - Method in interface nxopen.die.RotorSectionBuilder
-
Sets the rotor faces attributes
License requirements: ug_die_design ("Die Design")
.
- setRotorInteria(double) - Method in interface nxopen.motion.PMDCMotorBuilder
-
Sets the rotor interia
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setRotorRotationAngle(String) - Method in interface nxopen.die.RotorBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setRotorSolid(Body) - Method in interface nxopen.die.RotorBuilder
-
Sets the rotor solid of the rotor casting.
- setRoughnessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setRoughnessType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setRoughOffset(boolean) - Method in interface nxopen.features.OffsetCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setRoughOffset(boolean) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRoughPasses(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setRoundCrossLinesPosition(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setRoundDimensionValue(boolean) - Method in interface nxopen.tooling.WorkpieceBuilder
-
License requirements: None.
- setRoundFeetAndInches(boolean) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setRounding(boolean) - Method in interface nxopen.cam.RoundPointBuilder
-
License requirements: None.
- setRoundoffInsertXYPosition(boolean) - Method in interface nxopen.tooling.DieDesignSettingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRoundPosition(boolean) - Method in interface nxopen.tooling.ElectrodeDeleteBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setRoundPrecision(double) - Method in interface nxopen.tooling.WorkpieceBuilder
-
License requirements: None.
- setRoundTip(boolean) - Method in interface nxopen.tooling.CoolingExtendBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRouteCornerBendMethods(CornerTypeBuilder.BendMethods) - Method in interface nxopen.routing.CornerTypeBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setRouteCornerBendOptions(CornerTypeBuilder.BendOptions) - Method in interface nxopen.routing.CornerTypeBuilder
-
- setRouteCornerBendTable(String) - Method in interface nxopen.routing.CornerTypeBuilder
-
Sets the name of bend radius table
License requirements: routing_base ("Routing Basic")
.
- setRouteCornerNumberOfMiters(int) - Method in interface nxopen.routing.CornerTypeBuilder
-
Sets the number of miter in mitered bend corner
License requirements: routing_base ("Routing Basic")
.
- setRouteCornerRequireLinearSolution(boolean) - Method in interface nxopen.routing.CornerTypeBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setRouteCornerTypeOptions(CornerTypeBuilder.Type) - Method in interface nxopen.routing.CornerTypeBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setRoutedCondition(boolean) - Method in interface nxopen.routing.RouteLogicalAssociation
-
Set the routed condition of a logical association object
The routed condition evaluates the state of the control object.
- setRouteStockPickColor(NXColor) - Method in interface nxopen.routing.StockColorBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setRoutingLevel(String) - Method in interface nxopen.routing.EditCharacteristicsBuilder
-
Sets the Routing Level associated with selected objects.
- setRoutingObjects(NXObject[]) - Method in interface nxopen.routing.RoutingMeasureDistanceBuilder
-
The routing objects used for path length
License requirements: None.
- setRoutingSelection(RouteObjectCollector) - Method in interface nxopen.routing.RoutingMeasureDistanceBuilder
-
License requirements: None.
- setRoutingSubsetAsWorkPart() - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
The builder may generate multiple subsets.
- setRowCount(int) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setRowCount(int) - Method in interface nxopen.ITableEditorDataProvider
-
Sets the number of rows in the table
License requirements: None.
- setRowDeepNumber(int) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the number of rows of columns in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setRowHeadCfw(Tag, int[]) - Method in interface nxopen.uf.UFTabnot
-
- setRowHeight(double) - Method in interface nxopen.annotations.TableSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setRowHeight(Tag, double) - Method in interface nxopen.uf.UFTabnot
-
- setRowHeigths(double[]) - Method in interface nxopen.openxml.TableDocumentData
-
Sets the height array of the rows
License requirements: None.
- setRowLock(Tag, boolean) - Method in interface nxopen.uf.UFPlist
-
- setRowNumber(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setRowSpacingDouble(double) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the value of row spacing between columns
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setRowTitles(String[]) - Method in interface nxopen.blockstyler.DoubleTable
-
Sets the titles of rows in table
License requirements: None.
- setRowTitles(String[]) - Method in interface nxopen.blockstyler.IntegerTable
-
Sets the RowTitles
License requirements: None.
- setRP1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRP1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRP1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRP1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRP2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRP2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRP2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRP2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRPillarFeature(HeadImpactRPillar) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRpmValue(double) - Method in interface nxopen.cae.AfuZHeaderInfo
-
Sets the value of RPM field
License requirements: None.
- setRpoDimensions(RPODimension[]) - Method in interface nxopen.features.RPOBuilder
-
Sets the list of RPO dimemsions
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setRpoRefernce(Tag, double[], int) - Method in interface nxopen.uf.UFModlUi
-
- setRPSFeatures(String[]) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Set the RPS features.
- setRPSXFeatures(String[]) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Set the RPS features controlling the X direction.
- setRPSYFeatures(String[]) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Set the RPS features controlling the Y direction.
- setRPSZFeatures(String[]) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Set the RPS features controlling the Z direction.
- setRule(String) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setRule(String) - Method in interface nxopen.drafting.SpecifyRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setRuleCondition(String) - Method in interface nxopen.cam.Teaching
-
Sets the rule conditions
License requirements: fbm_author ("FBM Author")
.
- setRuleCreationType(CallMethodRuleBuilder.CreationType) - Method in interface nxopen.ame.CallMethodRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setRuleInputs(String[], String[]) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
This method sets the rule inputs.
- setRuleLibraries(String[]) - Method in interface nxopen.cam.FeatureProcessBuilder
-
Sets the active rule libraries
License requirements: ug_holemaking ("UG Holemaking")
.
- setRuleLibraryPath(String) - Method in interface nxopen.cam.Teaching
-
Sets the selected rule library path
License requirements: fbm_author ("FBM Author")
.
- setRuleMatchOptions(FeatureTeaching.RuleMatchOptionType) - Method in interface nxopen.cam.FeatureTeaching
-
License requirements: fbm_author ("FBM Author")
.
- setRuleName(String) - Method in interface nxopen.ame.CallMethodRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setRuleName(String) - Method in interface nxopen.ame.OperandRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setRuleName(String) - Method in interface nxopen.ame.OperatorRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setRulePath(String) - Method in interface nxopen.cam.FeatureTeaching
-
Sets the selected rule path
License requirements: fbm_author ("FBM Author")
.
- setRulePath(String) - Method in interface nxopen.cam.Teaching
-
Sets the selected rule path
License requirements: fbm_author ("FBM Author")
.
- setRulePriority(double) - Method in interface nxopen.cam.Teaching
-
Sets the selected rule priority
License requirements: fbm_author ("FBM Author")
.
- setRules(String[]) - Method in interface nxopen.drawings.DrawingRegionRulesBuilder
-
Set Rules
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setRules(Sketch.AutoDimensioningRule[]) - Method in interface nxopen.InferredConstraintsBuilder
-
Set the auto dimensioning rule list to builder
License requirements: None.
- setRules(Sketch.AutoDimensioningRule[]) - Method in interface nxopen.SketchAutoDimensionBuilder
-
Set the auto dimensioning rule list to builder.
- setRulesList(String[]) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Set the ordered rules list
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setRulesList(String[]) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
The set of order list
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setRulingType(ToolAxisVariable.RulingTypes) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setRunAttributes(IntegrateRunsBuilder.Enum) - Method in interface nxopen.routing.IntegrateRunsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setRunClearanceAnalysis(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setRunId(Tag, String) - Method in interface nxopen.uf.UFRouteRun
-
- setRunIdentifier(String) - Method in interface nxopen.routing.DefineRunBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setRunInParallel(boolean) - Method in interface nxopen.motion.TirePropertyFtBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setRunMode(SIZERExportBuilder.RunMode) - Method in interface nxopen.tooling.SIZERExportBuilder
-
Sets the run mode.
- setRunName(String) - Method in interface nxopen.routing.IntegrateRunsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setRunName(String) - Method in interface nxopen.routing.SplitRunBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setRunNumber(String) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRunoffDepth(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the runoff depth of the keyway.
- setRunoffDepth(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the runoff depth of keyways.
- setRunoffDiameter(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the runoff diameter of the keyway.
- setRunoffDiameter(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the runoff diameter of keyways.
- setRunoffLength(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the runoff length of the keyway.
- setRunoffLength(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the runoff length of keyways.
- setRunoffType(KeywayChildBuilder.RunoffTypeOption) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the runoff type of the keyway.
- setRunoffType(KeywayParentBuilder.RunoffTypeOption) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the runoff type of keyways.
- setRunoffWidth(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the runoff width of the keyway.
- setRunoffWidth(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the runoff width of keyways.
- setRunout(AeroJoggleBuilder.SideType, String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the runout expression.
- setRunProcessAssistant(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setRunTest(boolean) - Method in interface nxopen.cae.optimization.TBSTestFunction
-
License requirements: cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setRuntimePropertyTag(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setRunToSimTime(boolean) - Method in interface nxopen.sim.LoadSnapshotBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setRunType(String) - Method in interface nxopen.routing.DefineRunBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setRunType(Tag, String) - Method in interface nxopen.uf.UFRouteRun
-
- setRValue(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setRx(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRxLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRxStiffnessDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRxStructuralDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRxUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRxViscousDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRy(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRyLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRyStiffnessDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRyStructuralDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRyUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRyViscousDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRz(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRzLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRzStiffnessDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRzStructuralDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setRzUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setRzViscousDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- sets - Variable in class nxopen.uf.UFModeling.AskSetsOfMemberData
-
- setSAEPercentile(ManikinBuilder.SAEPercentileType) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSafeClearance(double) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setSafeClearance(double) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setSafeDistance(double) - Method in interface nxopen.cam.NcmClearanceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSafeDistance(double) - Method in interface nxopen.cam.RoughTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSafeDistance(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSafePlane(NXObject) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSafePlaneXform(NXObject) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSafetyClass(String) - Method in interface nxopen.annotations.SafetyClassBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setSafetyFactor(double) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSafetyFactor(double) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSafetyMargin(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSafetyMargin(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSafetyMarginFromFlc(double) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSafetyMarginRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSafetyMarginRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSamcefElementType(LaminateExtrudeSetupBuilder.SamcefElementTypeEnum) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSamcefElementType(LaminateFillSetupBuilder.SamcefElementTypeEnum) - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSamcefSolidShells(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
- setSamcefSolidShells(boolean) - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
- setSameEndOffsets(boolean) - Method in interface nxopen.cae.BeamSectionOffsetOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSameParent(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setSameTransition(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSameWithPlate(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setSampleDensityIndex(int) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSampleDistance(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSampleDistance(double) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setSampleNumber(int) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSamplePoints(int) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSamplingPointType(FieldProfileTable.SamplingPointOption) - Method in interface nxopen.fields.FieldProfileTable
-
License requirements: None.
- setSandwichBottomSkinMeshOption(int) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSandwichInflation(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSandwichNumCoreElementLayers(int) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSandwichTopSkinMeshOption(int) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSaProject(String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSaProject(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSave2dIpw(boolean) - Method in interface nxopen.cam.PlanarMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSaveAdvancedDisplayFacets(boolean) - Method in interface nxopen.preferences.PartVisualizationPerformance
-
License requirements: None.
- setSaveAfuOption(boolean) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSaveAllIterationResults(boolean) - Method in interface nxopen.cae.optimization.DAOStopCondition
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSaveAndExportStatus(boolean) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setSaveAndExportStatus(boolean) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setSaveAs(ExportPlantToDWGBuilder.SaveAsType) - Method in interface nxopen.linedesigner.ExportPlantToDWGBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSaveAs(ExportToDWGBuilder.SaveAsTypeAPI) - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSaveAsAction(DesignElementBuilder.SaveAsActionType) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setSaveAsLocation(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSaveAsName(String) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSaveAsPartfile(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setSaveAssociativeCurves(boolean) - Method in interface nxopen.annotations.LightweightSectionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setSaveComponentPartFilesDuringLoad(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the save component part files flag during load for I-DEAS
License requirements: None.
- setSaveConstraints(boolean) - Method in interface nxopen.geometricutilities.SaveConstraintsBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSaveContactDisplayDataFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSaveDataForFeatureEdit(SessionModeling.SaveDataForFeatureEditOption) - Method in interface nxopen.preferences.SessionModeling
-
Sets the option "Save Data for Feature Edit" specifies what additional data will
be saved in the part to enhance feature edit.
- setSaveDestination(VisualReport.SaveDestinationOption) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setSaveDestination(VisualReport.SaveDestinationOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setSaveDid(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSavedInOriginalPart(boolean) - Method in interface nxopen.tooling.ReusableObject
-
License requirements: None.
- setSaveDirectory(String) - Method in interface nxopen.partfamily.TemplateManager
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSaveDisplayFacets(boolean) - Method in interface nxopen.BasePart
-
License requirements: None.
- setSaveDmlDidLabel(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSaveDmlPcsLabel(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSaveDmlPointData(boolean) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSaveDmlVersion(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSaveFaceColors(boolean) - Method in interface nxopen.cam.NCAssistantBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSaveFlag(CutterExport.SaveFlags) - Method in interface nxopen.cam.CutterExport
-
License requirements: None.
- setSaveGeometry(boolean) - Method in interface nxopen.cae.DurabilityEventSolverBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSaveGeometry(boolean) - Method in interface nxopen.cae.DurabilitySolverBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSaveInterferenceGeometry(boolean) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSaveIpw(boolean) - Method in interface nxopen.sim.KinematicComponentBuilder
-
Save an IPW with the component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setSaveIpwModel(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setSaveLayoutAtExit(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the save layout at exit flag.
- setSaveLevelBasedIpw(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setSaveMasterPart(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSaveName(String) - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
-
License requirements: None.
- setSavePartFile(ValidatorOptions.SaveModeTypes) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setSavePcsLabel(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSaveRelation(boolean) - Method in interface nxopen.features.MakeOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSaveResultInPart(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setSaveResultInTeamcenter(ValidatorOptions.SaveModeTypes) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setSaveResultsInPart(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setSaveResultsToTeamcenterOption(RequirementCheck.SaveResultsToTeamcenterOptions) - Method in interface nxopen.validate.RequirementCheck
-
License requirements: None.
- setSaveRollbackData(boolean) - Method in interface nxopen.preferences.SessionModeling
-
- setSaveScenario(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSaveSetting(boolean) - Method in interface nxopen.tooling.PocketBuilder
-
License requirements: None.
- setSaveState(InspectionAlignmentBuilder.SaveStates) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSaveTrueshape(boolean) - Method in interface nxopen.uf.UFAssem
-
- setSaveXmlTransform(boolean) - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setSBendData(int, ControlPoint, ControlPoint, SplineSegment, double, boolean) - Method in interface nxopen.routing.SBendCorner
-
Set the data for the S-Bend object
License requirements: routing_base ("Routing Basic")
.
- setScalarArrayPropertyValue(String, double[]) - Method in interface nxopen.BasePropertyTable
-
Sets the scalar array value of the property.
- setScalarArrayWithUnitsPropertyValue(String, double[], Unit) - Method in interface nxopen.BasePropertyTable
-
Sets the scalar array and unit value of the property
License requirements: None.
- setScalarFactor(double) - Method in interface nxopen.cae.responsesimulation.FunctionComponentData
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setScalarFieldPropertyValue(String, FieldExpression) - Method in interface nxopen.cae.PropertyTable
-
Sets the field expression
FieldExpression
value of the property
License requirements: None.
- setScalarFieldWrapperByIndex(int, int, String, ScalarFieldWrapper) - Method in interface nxopen.BasePropertyTable
-
- setScalarFieldWrapperPropertyValue(String, ScalarFieldWrapper) - Method in interface nxopen.BasePropertyTable
-
- setScalarForce(Tag, UFMotion.ScalarForceTorque) - Method in interface nxopen.uf.UFMotion
-
- setScalarObject(Scalar) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScalarPropertyValue(String, Expression) - Method in interface nxopen.BasePropertyTable
-
- setScalarTablePropertyValue(String, ScalarTableValue) - Method in interface nxopen.BasePropertyTable
-
Set a scalar table value from the scalar table value of the property
License requirements: None.
- setScalarTorque(Tag, UFMotion.ScalarForceTorque) - Method in interface nxopen.uf.UFMotion
-
- setScalarWithDataPropertyValue(String, double, Unit) - Method in interface nxopen.cae.PropertyTable
-
Sets the the Scalar property as a constant double value with units.
- setScalarWithDataPropertyValue(String, String, Unit) - Method in interface nxopen.cae.PropertyTable
-
Sets the the Scalar property as a string value with units.
- setScale(double) - Method in interface nxopen.annotations.BalloonNoteBuilder
-
Sets the scale
License requirements: None.
- setScale(double) - Method in interface nxopen.annotations.CustomSymbolData
-
- setScale(double) - Method in interface nxopen.annotations.HatchBuilder
-
- setScale(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScale(double) - Method in interface nxopen.annotations.LineWeldBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setScale(int) - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Sets the DOF Set display scaling factor
this option specifies the scale of the graphic symbol relative to the size of the bounding box of the FE model.
- setScale(double) - Method in interface nxopen.cae.CrossSectionParameters
-
Set scale.
- setScale(double) - Method in interface nxopen.cae.DeformationParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setScale(int, double) - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Sets the scale.
- setScale(double) - Method in interface nxopen.cae.DurabilityFunctionExcitationBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setScale(double) - Method in interface nxopen.cae.DurabilityLoadPatternBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setScale(int, double) - Method in interface nxopen.cae.DurabilityResultPathBuilder
-
Sets the scale for a loadcase by index.
- setScale(double) - Method in interface nxopen.cae.optimization.TBSShapeOptimizationParameters
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setScale(double) - Method in interface nxopen.cae.ResultParameters
-
Set scale.
- setScale(int) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the BC display scaling factor
this option specifies the scale of the graphic symbol relative to the size of the bounding box of the FE model.
- setScale(double) - Method in interface nxopen.cae.ThicknessBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setScale(double) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setScale(double) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setScale(double) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the scale of a member view.
- setScale(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScale(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScale(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScale(double) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setScale(double) - Method in interface nxopen.geometricanalysis.DupinBuilder
-
License requirements: None.
- setScale(double, double) - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
Sets the sheet scale
License requirements: nx_layout ("NX Layout")
.
- setScale(double) - Method in interface nxopen.PartImporter
-
Sets the scale.
- setScale(double) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setScale(double) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setScale(double) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setScale(Tag, double) - Method in interface nxopen.uf.UFView
-
- setScale(double) - Method in interface nxopen.View
-
Sets the scale of the specified view to the desired scale factor.
- setScale(double) - Method in interface nxopen.Xform
-
Sets the scale
License requirements: None.
- setScaleAndAspectRatio(double, double) - Method in interface nxopen.annotations.UserSymbolPreferences
-
Sets the scale and aspect ratio
License requirements: None.
- setScaleCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScaleCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScaleCharacterHeightFactor(double) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScaleDenominator(double) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScaleDenominator(double) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setScaleEnum(int) - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setScaleExpression(Expression) - Method in interface nxopen.annotations.CustomSymbolData
-
- setScaleFactor(double) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setScaleFactor(double) - Method in interface nxopen.cae.PostAnnotationPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setScaleFactor(double) - Method in interface nxopen.cam.InspectionGraphicalReportOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScaleFactor(double) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScaleFactor(double) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setScaleFactor(double) - Method in interface nxopen.cam.WorkInstructionOutputBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setScaleFactor(double) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setScaleFactor(double) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScaleFactor(double) - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setScaleFunction(MotionFunction) - Method in interface nxopen.motion.LinkCouplerCoupleBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setScaleLabel(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the display of scale label.
- setScaleLabel(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScaleLimits(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setScaleLimits(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setScaleMaxLimitLabel(String) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setScaleMaxLimitLabel(String) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setScaleMinLimitLabel(String) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setScaleMinLimitLabel(String) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setScaleModified(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setScaleNumerator(double) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScaleNumerator(double) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setScaleOfXform(Tag, double) - Method in interface nxopen.uf.UFSo
-
- setScaleOnFirstDrivingDimension(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not the entire active sketch is scaled
about the sketch origin when the first non-angular driving dimension is applied.
- setScaleOrigin(Point3d) - Method in interface nxopen.features.LocalScaleCurveBuilder
-
License requirements: None.
- setScalePosition(ScalePositionTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScalePosition(ScalePositionTypes) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScalePosition(ScalePositionTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScalePrefix(String) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScalePrefix(String) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScalePrefix(String) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScaleSpeed(double) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
License requirements: None.
- setScaleStep(double) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
License requirements: None.
- setScaleStepSize(double) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setScaleStepSizeDouble(double) - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Sets the clearance step size scale
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setScaleType(ViewScaleBuilder.Type) - Method in interface nxopen.drawings.ViewScaleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScaleType(ScaleCurveBuilder.ScaleCurveType) - Method in interface nxopen.features.ScaleCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScaleType(FaceCurvatureAnalysisBuilder.ScaleTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setScaleType(LinkCouplerCoupleBuilder.ScaleChoices) - Method in interface nxopen.motion.LinkCouplerCoupleBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setScaleX(double) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setScaleX(double) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setScaleY(double) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setScaleY(double) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setScalingArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilder
-
- setScalingArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setScalingArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilder
-
- setScalingArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setScalingCenter(StudioXformBuilder.ScalingCenterType) - Method in interface nxopen.features.StudioXformBuilder
-
- setScalingCenter(StudioXformBuilderEx.ScalingCenterType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setScalingCenterPoint(Point) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setScalingDirection(StudioXformBuilder.ScalingDirectionType) - Method in interface nxopen.features.StudioXformBuilder
-
- setScalingDirection(StudioXformBuilderEx.ScalingDirectionType) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setScalingMethod(SubdivisionExtrudeCageBuilder.ScalingMethodType) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setScalingMethod(TransformCageData.ScalingMethodType) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setScalingMethod(SectionAnalysisBuilder.ScalingMethodType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setScalingMethod(SectionAnalysisExBuilder.ScalingMethodType) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setScalingMethod(SurfaceIntersectionBuilder.ScalingTypes) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setScalingMethodOption(StyledSweepBuilder.ScalingMethodOptions) - Method in interface nxopen.features.StyledSweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setScalingOption(ScalingMethodBuilder.ScalingOptions) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScalingPoint(Point) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScalingType(CorrelAlignmentBuilder.ScalingChoice) - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setScalingType(DecalBuilder.Scaling) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setScalingValue(double) - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setScanCurveMode(InspectionMethodBuilder.ScanCurveModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScanForce(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScanModeType(InspectionMethodBuilder.ScanModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScanModeType(InspectionMethodBuilder.ScanModeTypes) - Method in interface nxopen.cam.InspectionScanArcBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScanModeType(InspectionMethodBuilder.ScanModeTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScanModeType(InspectionMethodBuilder.ScanModeTypes) - Method in interface nxopen.cam.InspectionScanLineBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScanSpeed(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScantlingSplitSystem(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setScatter(boolean) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setScatterOption(boolean) - Method in interface nxopen.assemblies.AddComponentBuilder
-
Sets the scatter option for added components.
- setScenarioDescriptor(PostScenarioDescriptor) - Method in interface nxopen.cae.PostScenarioParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setScenarioName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSceneDescription(String[]) - Method in interface nxopen.display.ExtractScene
-
Sets the scene description
License requirements: None.
- setSceneImageOption(ReflectionAnalysisBuilder.SceneImageType) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setSceneName(String) - Method in interface nxopen.display.ExtractScene
-
License requirements: None.
- setScheme(ConvertFeatureGroupsToDesignGroupsBuilder.ConversionScheme) - Method in interface nxopen.geometricutilities.ConvertFeatureGroupsToDesignGroupsBuilder
-
License requirements: None.
- setScope(HoleTableSettingsHoleFiltersBuilder.ScopeType) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScope(TableColumnBuilder.ScopeType) - Method in interface nxopen.annotations.TableColumnBuilder
-
License requirements: drafting ("DRAFTING")
.
- setScope(ShipFeatureConverter.PartScope) - Method in interface nxopen.features.shipdesign.ShipFeatureConverter
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setScopeEnum(InspectionLinkPmiBuilder.PmiScopeTypes) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setScopeTypeOfVisualReport(VisualReport.ScopeTypeOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
License requirements: None.
- setScrapCutters(ISurface[]) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the scrap cutters of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setScrapMethod(ScrapDesignBuilder.ScrapDefType) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrapPosition(ScrapDesignBuilder.ScrapDefPosition) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrapTol(double) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrapTypeEnum(ScrapDesignBuilder.Body) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScreenTextSize(TransientText.TextSize) - Method in interface nxopen.display.TransientText
-
Sets the approximate size of the text (small, mendium, large) as measured on
the graphics screen.
- setScrewCheck(boolean) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewClearanceEndChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewClearanceEndChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewClearanceHoleForm(HolePackageBuilder.HoleForms) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewClearanceReliefEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewClearanceStartChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewClearanceStartChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewDiameter(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setScrewDisplCurveFunction(Function) - Method in interface nxopen.motion.JointDefine
-
License requirements: None.
- setScrewFitOption(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewSeatAlignmentVector(Vector3d) - Method in interface nxopen.routing.PlacePartBuilder
-
Sets the alignment vector, primary axis direction for a stock, reducer, elbow, etc. along the part the screw seat is placed to align the screw seat.
- setScrewSeatEnd(Point3d) - Method in interface nxopen.routing.PlacePartBuilder
-
Sets a point in builder, which is required for final placement of screw seat.
- setScrewSeatIntersectionPoint(Point3d) - Method in interface nxopen.routing.PlacePartBuilder
-
Sets the final position of screw seat.
- setScrewSeatPlacement(TaggedObject, TaggedObject, Point3d, Point3d, Expression, Expression) - Method in interface nxopen.routing.PlacePartBuilder
-
Sets the input parameters to be used for measurement holder screw seats.
- setScrewSize(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewSize(String) - Method in interface nxopen.geometricutilities.StartHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewSizeText(String) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setScrewSizeTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setScrewSplineFunction(Function) - Method in interface nxopen.motion.JointDefine
-
License requirements: None.
- setScrewStandard(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewType(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewType(String) - Method in interface nxopen.geometricutilities.StartHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrewType(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Sets screw type for hole series.
- setScript(TextBuilder.ScriptOptions) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setScrollAreaSize(int) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setScrollFrozenColumn(int) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setScrollLineNumber(int) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setsDefaultTypesFromContext() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
Set default section types of the builder when a new context entity is set.
- setSealerCheckZoneRadius(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Sealer Check Zone Radius
License requirements: ugweld ("UG WELD")
.
- setSeamOption(SeamBlockBuilder.SeamType) - Method in interface nxopen.features.shipdesign.SeamBlockBuilder
-
License requirements: None.
- setSeamWeldType(SeamWeldType) - Method in interface nxopen.cae.connections.SeamWeld
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSearchBoundaryBodies(boolean) - Method in interface nxopen.tooling.ChannelFittingBuilder
-
License requirements: None.
- setSearchByProductSelection(TaggedObject) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
Set the search by product selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setSearchDirectories(String[], boolean[]) - Method in interface nxopen.LoadOptions
-
Set which search directories are to appear in the list.
- setSearchDirectories(int, String[], boolean[]) - Method in interface nxopen.uf.UFAssem
-
- setSearchDirectoryList(String) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setSearchDistance(double) - Method in interface nxopen.cae.ImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSearchExistingInterPartExpressionOnly(boolean) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setSearchFolderListForExportDrawingFiles(String[]) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Set search folder list
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSearchGeometry(DisplayableObject[]) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Sets the geometry to search
License requirements: None.
- setSearchGeometry(boolean) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the search geometry for a reusable component
License requirements: None.
- setSearchingDestinationObject(String) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setSearchingSourceObject(String) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setSearchingSourcePart(String) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setSearchingSourcePartAttribute(String) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setSearchLibraries(String[]) - Method in interface nxopen.preferences.RulePreferences
-
Set the search libraries for user classes.
- setSearchOptionValue(String, String, boolean) - Method in interface nxopen.assemblies.SubsetRecipe
-
Sets value of specified search option from given option set.
- setSearchOrientation(Direction) - Method in interface nxopen.cae.connections.INodalTargetsPairing
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSearchScope(SearchModelViewBuilder.SearchScopeOptions) - Method in interface nxopen.annotations.SearchModelViewBuilder
-
License requirements: None.
- setSearchShapeSimilarity(ShapeSearchBuilder.ShapeSimilarity) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
License requirements: shape_search ("Shape Search")
.
- setSearchShapeSize(ShapeSearchBuilder.ShapeSize) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
License requirements: shape_search ("Shape Search")
.
- setSearchSubsetBuilder(SubsetBuilder) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
Sets the subset builder which needs to be set by user to search runs, the user will have to use
FindInCollaborativeDesign
to search for runs
using object type RunElement.
- setSearchTemplateFromSiteDirectory(boolean) - Method in interface nxopen.report.ReportPreference
-
License requirements: None.
- setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.AttributeSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.ProximitySearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setSearchTermLogic(SearchTerm.SearchTermLogicType) - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setSearchTermLogic(SearchTerm.SearchTermLogicType, SearchTerm[]) - Method in interface nxopen.assemblies.SubsetRecipe
-
Changes the search term logic of each
SearchTerm
s passed in.
- setSearchType(ShapeSearchBuilder.SearchByType) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
License requirements: shape_search ("Shape Search")
.
- setSearchType1(String) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSearchType2(String) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSearchTypes(AssociateDatumsUnitDesignsBuilder.Type) - Method in interface nxopen.tooldesigner.AssociateDatumsUnitDesignsBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setSearchTypes(SelectDatumsBuilder.SearchOption) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setSearchTypes(SelectFixtureUnitsBuilder.SearchTypeEnum) - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setSearchValue(String) - Method in interface nxopen.tooldesigner.AssociateDatumsUnitDesignsBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setSearchValue(String) - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setSeat(HumanPosturePredictionBuilder.SeatType) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setSeatAngle(double) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
- setSeatDirection(BaseDataPassengerBuilder.SeatDirectionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSeatPosition(SeatBeltAnchorageBuilder.SeatPositionTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSeatReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSeatReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSeatReferencePoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSeatReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSeatReferencePointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSeatTrackAngleA19(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setSeatType(SeatBeltAnchorageBuilder.SeatTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSecDatLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSecDirection(InspectionAlignmentBuilder.AlignmentDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSECNode(DBConveyorNode) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSecondArrowheadCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the second arrowhead color, font, and width
License requirements: None.
- setSecondArrowheadColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondArrowheadFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondArrowheadWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondArrowLineCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the second arrow line color, font, and width
License requirements: None.
- setSecondArrowLineColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondArrowLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondArrowLineWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondArrowType(ArrowheadType) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the second arrow type
License requirements: None.
- setSecondArrowType(ArrowheadType) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondary(boolean) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Sets the contour flange type.
- setSecondary(boolean) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Sets the type of lofted flange feature - base lofted flange/secondary lofted flange.
- setSecondary(boolean) - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Sets the tab type
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSecondary(GanttOperationObject) - Method in interface nxopen.mechatronics.GanttLinkerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSecondary1(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSecondary1OnReference(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSecondary2(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSecondary2OnReference(PlateSystemBuilder.StiffenerDirectionType) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSecondaryAlignment(ViewCommonViewLabelBuilder.SecondaryAlignmentType) - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSecondaryCalloutActive(boolean) - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setSecondaryComponent(DrawingsPropertiesBuilder.SecondaryComponentOptions) - Method in interface nxopen.drawings.DrawingsPropertiesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSecondaryContentHiddenLineColor(NXColor) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setSecondaryContentHiddenLineFont(PartDrafting.FontType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setSecondaryContentHiddenLineWidth(PartDrafting.WidthType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setSecondaryContentVisibleLineColor(NXColor) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setSecondaryContentVisibleLineFont(PartDrafting.FontType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setSecondaryContentVisibleLineWidth(PartDrafting.WidthType) - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setSecondaryDatumDualMCMType(SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setSecondaryDatumDualText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setSecondaryDatumExtendedText(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSecondaryDatumMCMType(SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setSecondaryDatumReference(DatumReference) - Method in interface nxopen.annotations.FcfFrame
-
- setSecondaryDatumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setSecondaryDirection(InspectionAlignmentAssistantBuilder.Direction) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSecondaryIndexing(ViewCommonViewLabelBuilder.SecondaryIndexingType) - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSecondaryNumber(String) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSecondaryNumber(String) - Method in interface nxopen.layout2d.ConvertLayoutToSheetBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSecondaryNumberDelimiter(String) - Method in interface nxopen.drawings.DrawingFormatSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSecondaryNumberString(String) - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSecondaryOffsetGeometry(NXObject) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSecondaryRoughnessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setSecondaryRoughnessType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setSecondarySectionValues(String[]) - Method in interface nxopen.geometricutilities.SecondarySectionData
-
Set the Secondary Sketch Expression Values.
- setSecondarySequence(TurnRoughFinishTestCut.SecondarySequenceTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setSecondaryState(InspectionAlignmentAssistantBuilder.State) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSecondaryThicknessUser(double) - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setSecondaryToolName(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setSecondaryType(InspectionAlignmentAssistantBuilder.FeatureType) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSecondaryValuesOutsideTableInterpolation(FieldEvaluator.ValuesOutsideTableInterpolationEnum) - Method in interface nxopen.fields.FieldLinksTable
-
Set the values outside table interpolation option for sub fields if the sub fields are tables
License requirements: None.
- setSecondaryValuesOutsideTableInterpolation(FieldEvaluator.ValuesOutsideTableInterpolationEnum) - Method in interface nxopen.fields.FieldReference
-
If the reference field is heterogeneous, set the outside table values interpolation method for the secondary independent domain .
- setSecondaryVector(Direction) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSecondaryVectorChoice(LaminateDrapingDataBuilder.SecondaryVectorType) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSecondAssociativity(Associativity) - Method in interface nxopen.annotations.Dimension
-
Sets the second associativity data.
- setSecondAssociativityVectorFlipped(boolean) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Second associativity vector flipped
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setSecondAssociativityVectorFlipped(boolean) - Method in interface nxopen.annotations.BaseRapidDimensionBuilder
-
Second associativity vector flipped
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setSecondBody(DisplayableObject) - Method in interface nxopen.mechatronics.ChangeMaterialBuilder
-
Sets the second object.
- setSecondBody(DisplayableObject) - Method in interface nxopen.mechatronics.PreventCollisionBuilder
-
Sets the second object.
- setSecondBoundingObjectEndOption(TrimCurveBuilder.SecondBoundingObjectEndOptions) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSecondBoundingObjectOption(TrimCurveBuilder.SecondBoundingObjectOptions) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSecondBoundingObjectPickPoint(Point3d) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSecondBoundingPlane(Plane) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSecondChainInstallDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSecondClearance(double) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSecondCompartment(String) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSecondConstraintCurveCollector(ScCollector) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondConveyingSurfaceCorner(Point) - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSecondCsys(CoordinateSystem) - Method in interface nxopen.motion.JointDefine
-
Sets the csys of second link
License requirements: mechanisms ("MECHANISMS")
.
- setSecondCurve(NXObject) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSecondCurve(Curve) - Method in interface nxopen.features.GeodesicChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondCurve(Curve) - Method in interface nxopen.features.GeodesicFilletBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondCurveStock(double) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSecondCurveToolPosition(TeachmodeLinearMoveBuilder.CurveToolPositionTypes) - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSecondCut(int) - Method in interface nxopen.cam.DmStreamlineCutStep
-
License requirements: cam_base ("CAM BASE")
.
- setSecondDefinitionPoint(Point3d) - Method in interface nxopen.annotations.Associativity
-
Sets the second definition point.
- setSecondDirection(Direction) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setSecondDistance(String) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
- setSecondDriverJointLowerLimit(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSecondDriverJointSteps(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSecondDriverJointUpperLimit(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSecondEdgeContinuityReversed(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondEdgeLimitEndToEnd(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondEdgeReversed(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondEndPoint(Point) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setSecondExpressionDriven(boolean) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSecondExpressionRightHandSide(String) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSecondExtensionLineCfw(LineCfw) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the second extension line color, font, and width
License requirements: None.
- setSecondExtensionLineColor(NXColor) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondExtensionLineFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondExtensionLineWidth(LineWidth) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondFaceCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondFaceset(ScCollector) - Method in interface nxopen.weld.GrooveBuilder
-
- setSecondFacesetBottomEdges(Section) - Method in interface nxopen.weld.GrooveBuilder
-
- setSecondFacesetEndAdjacentFaces(Face[]) - Method in interface nxopen.weld.GrooveBuilder
-
- setSecondFacesetHelpPoint(Point3d) - Method in interface nxopen.weld.GrooveBuilder
-
- setSecondFacesetNormalReversed(boolean) - Method in interface nxopen.weld.GrooveBuilder
-
- setSecondFacesetStartAdjacentFaces(Face[]) - Method in interface nxopen.weld.GrooveBuilder
-
- setSecondFacesetTopEdges(Section) - Method in interface nxopen.weld.GrooveBuilder
-
- setSecondGeometryMaterialDirection(CurveContactBuilder.GeometryMaterialSide) - Method in interface nxopen.motion.CurveContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSecondGeometryMaxFacetSizeFactorFlag(boolean) - Method in interface nxopen.motion.BodyContactRecurdyn
-
License requirements: mechanisms ("MECHANISMS")
.
- setSecondJogAngle(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondJogDisplay(boolean) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondJogEndOffset(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondJogOrientation(JogOrientation) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondJogStartOffset(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondLength(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setSecondLinearDistance(double) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setSecondLink(Link) - Method in interface nxopen.motion.JointDefine
-
Sets the second link
License requirements: mechanisms ("MECHANISMS")
.
- setSecondLowerLimitEnabled(boolean) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSecondLowerLimitRightHandSide(String) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSecondMapView(View) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSecondMargin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSecondMatrix(NXMatrix) - Method in interface nxopen.motion.JointDefine
-
Sets the matrix of second link
License requirements: mechanisms ("MECHANISMS")
.
- setSecondObject(NXObject) - Method in interface nxopen.annotations.Associativity
-
Sets the second associativity object, if the annotation is associated to
an intersection point.
- setSecondObjectFilter(CollisionPairBuilder.Filter) - Method in interface nxopen.cam.CollisionPairBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSecondObjectName(String) - Method in interface nxopen.cam.CollisionPairBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSecondObjectType(AssociativeAngleBuilder.ObjectType) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSecondOffset(String) - Method in interface nxopen.features.ChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondOffset(String) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
- setSecondOffset(Expression) - Method in interface nxopen.routing.CrossSection
-
Sets the offset expression applied to the profile when generating a Sweep.
- setSecondOffsetOption(ConicCrossSection.OffsetMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondOrientationType(JointDefine.OrientationType) - Method in interface nxopen.motion.JointDefine
-
License requirements: mechanisms ("MECHANISMS")
.
- setSecondOrigin(Point) - Method in interface nxopen.motion.JointDefine
-
Sets the origin of second link
License requirements: mechanisms ("MECHANISMS")
.
- setSecondPanelType(GapFlushnessBuilder.PanelTypes) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondPenetrationDepth(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setSecondPlane(Plane) - Method in interface nxopen.features.IntersectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondPlane(Plane) - Method in interface nxopen.routing.FittingOverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setSecondPoint(double) - Method in interface nxopen.features.GeodesicChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondPoint(double) - Method in interface nxopen.features.GeodesicFilletBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondPosToExtensionLineDistance(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSecondPosToExtLineDist(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the second position to extension line distance
License requirements: None.
- setSecondPrincipleMi(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondPtSelect(Point) - Method in interface nxopen.cae.FaceFromBoundaryBuilder
-
License requirements: None.
- setSecondRadius(double) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSecondRevolutionGeometryData(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSecondRevolutionGeometryDataFile(String) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSecondRevolutionMaterialSide(boolean) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSecondsBetweenSteps(double) - Method in interface nxopen.features.FeatureReplayBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondSection(Section) - Method in interface nxopen.features.GeodesicChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondSection(Section) - Method in interface nxopen.features.GeodesicFilletBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSecondSection(Section) - Method in interface nxopen.features.RuledBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setSecondSection(Section) - Method in interface nxopen.weld.WeldPointBuilder
-
Create second section
License requirements: ugweld ("UG WELD")
.
- setSecondSegment(ISegment) - Method in interface nxopen.routing.DiscontinuityCorner
-
Sets the second segment of a discontinuity corner, segment must be
attached to the
ControlPoint
that
defines this corner.
- setSecondSort(Tag, String, int) - Method in interface nxopen.uf.UFPlist
-
- setSecondSpherePoint(Point) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSecondSuperElementIncrement(int) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSecondType(GcouplerMovementTypes) - Method in interface nxopen.motion.GeneralCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSecondUpperLimitEnabled(boolean) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSecondUpperLimitRightHandSide(String) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSecondVector(Direction) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSecondVector(Direction) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSecondVector(Direction) - Method in interface nxopen.motion.JointDefine
-
Sets the direction of second link
License requirements: mechanisms ("MECHANISMS")
.
- setSecondVectorForBunnyEar(Direction) - Method in interface nxopen.tooling.CornerDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSecondVectorView(View) - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSectCriteria(CyclicSymmetricParameters.SectorCriteria) - Method in interface nxopen.cae.CyclicSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSection(Section) - Method in interface nxopen.ExpressionSectionSet
-
License requirements: None.
- setSection(Section) - Method in interface nxopen.features.CurveLengthBuilder
-
Sets the section
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSection(ScCollector) - Method in interface nxopen.features.DeleteCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSection(Section) - Method in interface nxopen.features.EmbossRegion
-
Sets the section that is composed of chains
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSection(Section) - Method in interface nxopen.features.ExtrudeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSection(ScCollector) - Method in interface nxopen.features.ResizeChamferCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSection(Section) - Method in interface nxopen.features.RevolveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Sets the Section used by the bead. section should be open.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Sets the Section
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Sets the section of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Sets the Section used by the Dimple.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Sets the Section used by the Drawn Cutout.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder
-
Sets the section used by Edge Rip
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.JogBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Sets the section used by the louver.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the section used by the normal cutout.
- setSection(Section) - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Sets the section of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSection(Section) - Method in interface nxopen.features.VarsweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSection(Section) - Method in interface nxopen.SketchEvaluator
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionAlignment(GapFlushnessBuilder.SectionAlignments) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionAlignmentDirection(Direction) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionAlignmentVector(Direction) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSectionAngles(double[]) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the section angles for axis-symmetric model for which annotation is defined.
- setSectionArea(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionAxis(SplineBeamBuilder.SectionAxisType) - Method in interface nxopen.motion.SplineBeamBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSectionBlockParts(String[]) - Method in interface nxopen.features.shipdesign.SelectPartBuilder
-
The section block part file name.
- setSectionBlockParts(String[]) - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
The section block part file name.
- setSectionCurve(GroundClearanceBuilder.SectionCurveType) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSectionCurve(NXObject[]) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder
-
Set the section curve which belong to the attachment
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSectionCurveDirections(NXObject, NXObject, int[]) - Method in interface nxopen.annotations.HatchBuilder
-
Set directions of a curve to the annotation
The number of diection map elements need to specify before to
the direction of the curve elements to the annotation
License requirements: drafting ("DRAFTING")
.
- setSectionCurvesVisibility(boolean) - Method in interface nxopen.annotations.LightweightSectionView
-
Sets the lightweight section view curves visiblity
License requirements: None.
- setSectionedHiddenColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedHiddenFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedHiddenWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedSecondaryHiddenColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedSecondaryHiddenFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedSecondaryHiddenWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedSecondaryVisibleColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedSecondaryVisibleFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedSecondaryVisibleWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedVisibleColor(NXColor) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedVisibleFont(Font) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionedVisibleWidth(Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionFileBrowser(String) - Method in interface nxopen.linedesigner.CreateFenceBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSectionFrameType(SelectPartBuilder.Types) - Method in interface nxopen.features.shipdesign.SelectPartBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSectionGeometryTolerance(double) - Method in interface nxopen.drawings.ViewSettingsBuilder
-
License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.
- setSectioningMethod(SectionInertiaAnalysisBuilder.SampleMethod) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionLayer(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionLayer(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSectionLength(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionLineOnlyPlacementOrigin(Point3d) - Method in interface nxopen.drawings.SectionLineSegmentsBuilder
-
License requirements: None.
- setSectionLineType(SketchSectionLineBuilder.SectionLineTypes) - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSectionLocation(SweptBuilder.SectionLocationTypes) - Method in interface nxopen.features.SweptBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionMappingFile(String) - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSectionMethodCircleTangent(SectionSurfaceBuilderEx.SectionMethodCircleTangentType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSectionMethodCircularTangent(SectionSurfaceBuilder.SectionMethodCircularTangentEnum) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setSectionMethodFilletBridge(SectionSurfaceBuilder.SectionMethodFilletBridgeEnum) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setSectionMethodFilletBridge(SectionSurfaceBuilderEx.SectionMethodFilletBridgeType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSectionMethodRho(SectionSurfaceBuilder.SectionMethodRhoEnum) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setSectionMethodRho(SectionSurfaceBuilderEx.SectionMethodRhoType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSectionName(String) - Method in interface nxopen.cae.IBeamSectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSectionName(String) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionNormal(SectionInertiaAnalysisBuilder.SectionAxisNormal) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionNumber(String) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSectionNumber(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSectionNumber1(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSectionNumber2(int) - Method in interface nxopen.geometricanalysis.sectionanalysis.GridSpacingBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSectionOffsetPropertyValue(String, BeamSectionOffsetOptions) - Method in interface nxopen.cae.PropertyTable
-
Sets the beam section offset options
BeamSectionOffsetOptions
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.5.0
- setSectionOption(FaceCurvatureAnalysisBuilder.DirectionTypes) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSectionOrientation(AddendumSectionBuilder.SectionOrientationType) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSectionOrientation(Matrix3x3) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSectionOrientationOption(StyledSweepBuilder.SectionOrientationOptions) - Method in interface nxopen.features.StyledSweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSectionOrientationPropertyValue(String, BeamSectionOrientationOptions) - Method in interface nxopen.cae.PropertyTable
-
Sets the beam section orientation options
BeamSectionOrientationOptions
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.5.0
- setSectionOrigin(Point3d) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSectionPart(String) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionPlacement(String) - Method in interface nxopen.die.ThroatChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setSectionPlane(Plane) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSectionPlane(Plane) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionPlane(Plane) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionPlane(Plane) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSectionPlaneEntity(Plane) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets
License requirements: ugweld ("UG WELD")
.
- setSectionPlaneName(String) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionPlaneNormal(Direction) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSectionPlyLayer(int, int, int) - Method in interface nxopen.cae.ResultParameters
-
Set section, ply and layer
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSectionPoint(Point) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSectionPrefs(Tag, UFTabnot.SectionPrefs) - Method in interface nxopen.uf.UFTabnot
-
- setSectionRule(SectionViewBuilder.SectionRuleOptions) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
- setSectionRule(SectionViewBuilder.SectionRuleOptions) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSections(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSections(Section[]) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Set the sections.
- setSectionShape(AddendumSectionBuilder.SectionShapeType) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSectionShape(RunnerBuilder.SectionType) - Method in interface nxopen.tooling.RunnerBuilder
-
License requirements: None.
- setSectionSheetBodies(boolean) - Method in interface nxopen.drawings.SectionViewStyle
-
Sets the status of section sheet bodies.
- setSectionSheetBodies(boolean) - Method in interface nxopen.preferences.SectionViewPreferences
-
Sets the status of section sheet bodies.
- setSectionSide(DimpleBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Sets the section Side for the Dimple section.
- setSectionSide(DrawnCutoutBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Sets the section side for the Drawn Cutout.
- setSectionSide(LouverBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Sets the side of the section on which the louver is created and width is measure.
- setSectionSide(NormalCutoutBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the side of the section that the normal cutout removes material.
- setSectionSketch(Sketch) - Method in interface nxopen.features.EditCrossSectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSectionsPerDrawing(SectionDrawingBuilder.SectionsPerDrawingOptions) - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSectionSubType1(String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
Sets the section sub type by string value.
- setSectionSubType2(String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
Sets the section sub type2 by string value.
- setSectionTemplateString(Section) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setSectionType(SketchSectionLineBuilder.Type) - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSectionType(PillarSystemBuilder.StockSectionType) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSectionType(PillarBuilder.StockSectionType) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionType(PillarSystemBuilder.StockSectionType) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSectionType(ProfileBuilder.SectionOption) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSectionType(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSectionType(ShipSectionBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionType(int) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
- setSectionType(String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
This method sets the section type outside the block.
- setSectionType(StiffenerStockBuilder.StockSectionType) - Method in interface nxopen.features.shipdesign.StiffenerStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionType(StandardSectionBuilder.StandardSectionType) - Method in interface nxopen.motion.StandardSectionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSectionTypesInUserControl(boolean) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionVector(Direction) - Method in interface nxopen.motion.SplineBeamBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSectionVector(Direction) - Method in interface nxopen.tooling.RunnerBuilder
-
License requirements: None.
- setSectionViewButtonClicked(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSectionViewMode(SectionViewBuilder.SectionViewModeType) - Method in interface nxopen.drawings.SectionViewBuilder
-
License requirements: None.
- setSectionViewNamePrefix(String) - Method in interface nxopen.annotations.PmiPreferences
-
Sets the Section View name prefix
License requirements: None.
- setSectionViewType(SectionViewBuilder.SectionLineType) - Method in interface nxopen.drawings.SectionViewBuilder
-
License requirements: None.
- setSectionXMax(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionXMin(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionYMax(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionYMin(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionZMax(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setSectionZMin(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setSectorId(int) - Method in interface nxopen.cae.PostSelectionEntity
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSectorIndex(int) - Method in interface nxopen.cae.CyclicSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSectorIndices(int[]) - Method in interface nxopen.cae.CyclicSymmetricParameters
-
Set the selected indices
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSectors(int[]) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the sector ids for cyclic-symmetric model for which annotation is defined
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSectorValue(CyclicSymmetricParameters.Value) - Method in interface nxopen.cae.CyclicSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSecurityLogging(boolean) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setSecXorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSecYorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSecZorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSeed(String) - Method in interface nxopen.blockstyler.SetList
-
Sets the seed using a dlx file.
- setSeedCsys(CoordinateSystem) - Method in interface nxopen.tooling.QuickDatumCsysBuilder
-
Sets the seed csys.
- setSeedDatumCsys(CoordinateSystem) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setSeedDlxFile(String) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setSeedElement(FEElement) - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
License requirements: None.
- setSeedElement(FEElement) - Method in interface nxopen.cae.modelcheck.AlignBeamElementDirectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSeedElement(FEElement) - Method in interface nxopen.cae.modelcheck.AlignShellElementNormalBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSeedFace(Face) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setSeedFace(Face) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setSeedFace1(Face) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSeedFace1(Face) - Method in interface nxopen.weld.PlugSlotBuilder
-
License requirements: None.
- setSeedFace1(Face) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSeedFace2(Face) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSeedFace2(Face) - Method in interface nxopen.weld.PlugSlotBuilder
-
License requirements: None.
- setSeedFace2(Face) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSeedName(String) - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder
-
Set the seed element name which is used in RunContentProximity search.
- setSeedOnlyToggle(boolean) - Method in interface nxopen.geometricutilities.PatternDefinition
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSeedPart(String) - Method in interface nxopen.pdm.PartFromTemplateBuilder
-
- setSeedPartTemplateData(String, String, boolean) - Method in interface nxopen.PartCollection
-
Specify template data to open seed part or empty item revision
License requirements: None.
- setSeedPoint1(Point3d) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSeedPoint1(Point3d) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSeedPoint2(Point3d) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSeedPoint2(Point3d) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSeedReverseDirection(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSeeds(SearchResultElement[]) - Method in interface nxopen.assemblies.ProximitySearchTermBuilder
-
Set the proximity search term seed elements.
- setSeeThruAll(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not all less important
objects are de-emphasized.
- setSeeThruDeEmphasizedObjects(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not See-Thru is applied
to de-emphasized objects.
- setSeeThruPreview(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not all less important
objects are de-emphasized related to the Model Preview.
- setSeeThruSection(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not geometry on the section
plane is emphasized.
- setSeeThruStyle(PartVisualizationEmphasis.SeeThruStyleType) - Method in interface nxopen.preferences.PartVisualizationEmphasis
-
Sets the See-Thru style that determines how translucency and color
are used to de-emphasize shaded geometry.
- setSegDirection(Direction) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Sets the steel insert seg directions
License requirements: ug_die_design ("Die Design")
.
- setSegment(Line) - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setSegment(Line) - Method in interface nxopen.routing.RouteSegmentFont
-
Sets
License requirements: routing_base ("Routing Basic")
.
- setSegmentationOption(AestheticFaceBlendBuilder.SegmentationType) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSegmentBlendFaces(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSegmentConstraints(int[], double[]) - Method in interface nxopen.AutomaticTraceline
-
Sets the segment constraints of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSegmentIdentifier(int) - Method in interface nxopen.diagramming.ConnectionLocationBuilder
-
License requirements: None.
- setSegmentInteriorPart(Component) - Method in interface nxopen.routing.ISegment
-
Set a segment to be interior to supplied part
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setSegmentLength(double) - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setSegmentLength(boolean) - Method in interface nxopen.weld.GrooveBuilder
-
- setSegmentLength(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setSegmentRoundingMethod(LayoutLengthOptions.RoundingMethod) - Method in interface nxopen.formboard.LayoutLengthOptions
-
License requirements: routing_harness ("Routing Harness")
.
- setSegments(int) - Method in interface nxopen.facet.DivideFacetFaceBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setSegments(int) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSegments(int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSegments(int) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setSegmentScalingData(HumanData.SegmentScalingType, double, double, double) - Method in interface nxopen.features.HumanBuilder
-
Set segment data for segment scaling
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setSegmentSitesName(String[]) - Method in interface nxopen.features.HumanBuilder
-
Set the segment site name of edit human display.
- setSegmentsOrPatches(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSegmentTable(CamProfile) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Set segment table.
- setSegmentType(SectionLineSegmentPointBuilder.SegmentTypes) - Method in interface nxopen.drawings.SectionLineSegmentPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSegmentType(SegmentBuilder.TypeChoices) - Method in interface nxopen.motion.SegmentBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSegPoint(IOrientation) - Method in interface nxopen.die.SteelInsertSegmentChildBuilder
-
Sets the steel insert seg point or plane
License requirements: ug_die_design ("Die Design")
.
- setSEId(int) - Method in interface nxopen.cae.PostSelectionEntity
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSelectAll(boolean) - Method in interface nxopen.tooling.UnusedFileManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectAllElements(boolean) - Method in interface nxopen.cae.LaminateElementFilterBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSelectAllPlies(boolean) - Method in interface nxopen.cae.LaminatePlyFilterBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSelectAllProjectFeatureCurves(boolean) - Method in interface nxopen.ConvertToFromReferenceBuilder
-
License requirements: None.
- setSelectAllScrapsToggle(boolean) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: None.
- setSelectAssemblyInFolder(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectAttributeSpreadsheet(String) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectAttributeSpreadsheet(String) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: None.
- setSelectBodyOption(PolygonFaceOnMeshBuilder.SelectBodyMethod) - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSelectBoundaryPlane1(Plane) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setSelectBoundaryPlane2(Plane) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setSelectCamDirection(Direction) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSelectColorSpreadsheet(String) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setSelectDataFile(String) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectDatasetsName(String) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSelected(UIBlock[]) - Method in interface nxopen.blockstyler.SetList
-
Sets the selected items.
- setSelected(int) - Method in interface nxopen.uistyler.MultiSelectList
-
Specifies particular list items to be selected.
- setSelected(int) - Method in interface nxopen.uistyler.SingleSelectList
-
Specifies particular list items to be selected
License requirements: None.
- setSelected(CharacteristicsValueBuilder) - Method in interface nxopen.weld.CharacteristicsBuilder
-
License requirements: None.
- setSelectedAlignment(ViewAlignment) - Method in interface nxopen.drawings.ViewAlignmentBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSelectedArrangement(Arrangement) - Method in interface nxopen.assemblies.ArrangementsBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSelectedArrangementName(String) - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
License requirements: None.
- setSelectedBaseDefinition(NXObject) - Method in interface nxopen.ame.SelectionBaseDefinitionBuilder
-
Sets the selected base definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedBody(DisplayableObject) - Method in interface nxopen.facet.CreateTransitionBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setSelectedClassification(String) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.OPCClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.OPCUAClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.PlcSimAdvClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.ProfinetClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.SHMSignalClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.TCPClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.TCPSignalServerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.UDPSignalClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationName(String) - Method in interface nxopen.mechatronics.UDPSignalServerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationPart(Part) - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationPart(Part) - Method in interface nxopen.mechatronics.OPCClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationPart(Part) - Method in interface nxopen.mechatronics.OPCUAClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationPart(Part) - Method in interface nxopen.mechatronics.PlcSimAdvClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationPart(Part) - Method in interface nxopen.mechatronics.ProfinetClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationPart(Part) - Method in interface nxopen.mechatronics.SHMSignalClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationPart(Part) - Method in interface nxopen.mechatronics.TCPClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedConfigurationPart(Part) - Method in interface nxopen.mechatronics.UDPSignalClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectedCoordinateSystem(Result.CoordinateSystemSource, int) - Method in interface nxopen.cae.ClippingParameters
-
Set selected coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSelectedCoordinateSystem(Result.CoordinateSystemSource, int) - Method in interface nxopen.cae.ResultParameters
-
Set selected coordinate system in which results are to be presented
Coordinate systems labels defined in a result file can be retrieved using
Result.getResultCoordinateSystems()
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX7.5.1
- setSelectedcsys(CoordinateSystem) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSelectedCurve(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setSelectedCurveCollector(Section) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Sets the selected curve for non planar face
License requirements: None.
- setSelectedDesignerIndex(int) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setSelectedEditEdgeAndFace(Edge, Face) - Method in interface nxopen.features.MatchEdgeBuilder
-
Sets edge and face
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSelectedEngineeringObjectDefinition(NXObject) - Method in interface nxopen.ame.SelectionEngineeringObjectDefinitionBuilder
-
Sets the selected eo def
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedEntityType(PostGraphBuilder.EntityType) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSelectedExpression(TaggedObject) - Method in interface nxopen.blockstyler.ChooseExpression
-
License requirements: None.
- setSelectedFacetCollectionRule(int) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setSelectedFeaList(UFVariant[], int) - Method in interface nxopen.uf.UFMfm
-
- setSelectedFeatures(String[]) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Sets the selected features.
- setSelectedFragmentTag(FragmentObject) - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedIcon(String) - Method in interface nxopen.blockstyler.Node
-
License requirements: None.
- setSelectedInstances(int[], int[]) - Method in interface nxopen.geometricutilities.PatternInstanceEditBuilder
-
Sets the indices of the selected Pattern Instances whose expressions are to be edited with
the expressions provided in the
InstanceEditedExpressionsList
.
- setSelectedInterfaceMemberPort(InterfaceMemberPort) - Method in interface nxopen.ame.ConnectToLibraryItemBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedItemBooleans(int[]) - Method in interface nxopen.blockstyler.ListBox
-
Sets the SelectedItemStrings.
- setSelectedItemData(TaggedObject, String, String, TaggedObject[]) - Method in interface nxopen.routing.RunItemsBuilder
-
The selected items data of the run
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setSelectedItemIndex(int) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setSelectedItems(int[]) - Method in interface nxopen.blockstyler.ListBox
-
Sets SelectedItems
License requirements: None.
- setSelectedItems(int[]) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Set the selected items index value.
- setSelectedItemString(String) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setSelectedItemStrings(String[]) - Method in interface nxopen.blockstyler.ListBox
-
Sets the SelectedItemStrings.
- setSelectedLoadTransferListItem(SimMotionLoadsListItemBuilder) - Method in interface nxopen.cae.SimMotionLoadsBuilder
-
Sets the selected load transfer item
License requirements: None.
- setSelectedMaterial(PhysicalMaterial) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSelectedMaterial(PhysicalMaterial) - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSelectedNode(NXObject) - Method in interface nxopen.ame.SelectBaseDefinitionNodeBuilder
-
Sets the selected base definition node object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedNodes(FENode[]) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
Sets the destination nodes
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSelectedNodes(NavigatorNode[]) - Method in interface nxopen.shipdesign.NavigatorView
-
Sets selected nodes.
- setSelectedNonMasterToCopy(LogicalObject, String) - Method in interface nxopen.pdm.NonMasterData
-
Sets whether or not the non-master part specified will actually
get saved during the save as operation.
- setSelectedNonMasterToCopy(LogicalObject, String) - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
- setSelectedNonMasterToSaveAs(LogicalObject, String) - Method in interface nxopen.pdm.PartOperationBuilder
-
- setSelectedNonPlanarFace(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.BodyCollector
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.CurveCollector
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.FaceCollector
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SectionBuilder
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectElement
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
Sets the SelectedFacetRegions
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectFeature
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectNode
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectObject
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SelectPartFromList
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyAxis
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyPlane
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyPoint
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SpecifyVector
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SuperPoint
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjects(TaggedObject[]) - Method in interface nxopen.blockstyler.SuperSection
-
Sets the SelectedObjects
License requirements: None.
- setSelectedObjectsSubIDs(int[]) - Method in interface nxopen.blockstyler.SelectElement
-
Sets the SelectedObjectSubIDs
License requirements: None.
- setSelectedOccs(NXObject[], NXObject[]) - Method in interface nxopen.tooling.CreateBoxBuilder
-
Sets selected object occurrences.
- setSelectedOccurrences(NXObject[], NXObject[]) - Method in interface nxopen.features.ToolingBoxBuilder
-
Sets selected object occurrences.
- setSelectedOps(String[]) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Sets the selected operations.
- setSelectedOps(String[]) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Sets the selected operations.
- setSelectedOps(CAMObject[]) - Method in interface nxopen.cam.InspectionDeleteMeaPtsBuilder
-
Sets the selected operations.
- setSelectedOps(CAMObject[]) - Method in interface nxopen.cam.InspectionSaveToLayerBuilder
-
Sets the selected operations.
- setSelectedPart(NXObject) - Method in interface nxopen.motion.AddSubmechanismBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSelectedParts(BasePart[]) - Method in interface nxopen.pdm.PartOperationBuilder
-
- setSelectedPartsToCopy(BasePart[]) - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
Sets the selected parts.
- setSelectedPlyNames(String[]) - Method in interface nxopen.cae.LaminatePlyFilterBuilder
-
Sets the selected plies
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSelectedPolesIndex(int[]) - Method in interface nxopen.features.PoleSmoothingBuilder
-
Sets the index of selected poles
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSelectedProduct(ProductDefinition) - Method in interface nxopen.ame.ProductSelectionBuilder
-
Set selected product
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedProductDefinition(NXObject) - Method in interface nxopen.ame.SelectProductDefinitionBuilder
-
Sets the selected product definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedProductOrEngObjDefinition(NXObject) - Method in interface nxopen.ame.SelectProductOrEoDefinitionBuilder
-
Sets the selected product or EO definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedQuery(AMEQuery) - Method in interface nxopen.ame.EditClauseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedQueryClause(QueryClause) - Method in interface nxopen.ame.EditClauseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedReceptacleObject(NXObject) - Method in interface nxopen.ame.SelectMountingInterfaceLocationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedReferenceCsys(int) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The selected reference coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSelectedReferenceCsysSource(Result.CoordinateSystemSource) - Method in interface nxopen.cae.FreeBodyResultsBuilder
-
The source for the selected reference coordinate system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSelectedRegions(String[]) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Set the selected regions in the tree list
License requirements: None.
- setSelectedResults(String[], String[], String[]) - Method in interface nxopen.cae.LaminatePostReportBuilder
-
- setSelectedRule(int) - Method in interface nxopen.ame.ReportsSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectedSegment(NXObject) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setSelectedSegmentType(GuidedExtensionBuilderEx.SegmentType) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Sets the segment type for the selected segment.
- setSelectedSegmentType(GuidedExtensionBuilder.SegmentType) - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Sets the segment type for the selected segment.
- setSelectedSheets(int) - Method in interface nxopen.PlotSourceBuilder
-
License requirements: None.
- setSelectedSolutions(String[], boolean[], String[], String[]) - Method in interface nxopen.cae.LaminatePostReportBuilder
-
Set the selected results
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSelectedStandardPartData(String, String) - Method in interface nxopen.tooling.StandardPartData
-
Assign selected standard part data to the client data
License requirements: ug_mold_design ("UG MOLD")
.
- setSelectedStock(Stock) - Method in interface nxopen.routing.PathStockBuilder
-
Set the selected stock
License requirements: routing_base ("Routing Basic")
.
- setSelectedSurfaces(Face[]) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Sets the curve underlying selected surfaces
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSelectedTangencyGroup(TangencyGroupBuilder) - Method in interface nxopen.routing.AssignTangencyBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setSelectedView(ModelingView) - Method in interface nxopen.drawings.AddRemoveBoxViewBuilder
-
License requirements: None.
- setSelectedView(ModelingView) - Method in interface nxopen.drawings.SelectModelViewBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSelectEndPlane(Plane) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSelectFixtureRootTag(TaggedObject) - Method in interface nxopen.tooldesigner.SelectFixtureRootBuilder
-
Set selected fixture base
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setSelectFrom(CornerDesignBuilder.SelectFromOpt) - Method in interface nxopen.tooling.CornerDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectGeometryProjectedAsArcs(ViewWorkflowBuilder.Splarcs) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: None.
- setSelectGridArea(PickRectanglePointsBuilder) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the selected grid area of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSelectHighlightMode(SelectAndHighlightBuilder.SelType) - Method in interface nxopen.ame.SelectAndHighlightBuilder
-
Sets
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectHoleAxis(Direction) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setSelectHolesAccordingToAttribute(boolean) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectHolesAutomatically(boolean) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelection(String) - Method in interface nxopen.ame.InstantiateBaseDefinitionReuseSelectionBuilder
-
Sets the selection item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelection(Preferences.GeometryTypes, Preferences.SelectionTypes) - Method in interface nxopen.cam.Preferences
-
The geometry selection type method
License requirements: cam_base ("CAM BASE")
.
- setSelection(String) - Method in interface nxopen.tooling.SelectReuseLibraryItemBuilder
-
Sets the path of the file from the reuse library
License requirements: None.
- setSelectionAreaType(TBSGroupDefinition.GroupElementType) - Method in interface nxopen.cae.optimization.TBSBaseDesignVariableBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSelectionCallbacks(SelectionHandle, Selection.FilterCallback, Selection.SelectionCallback) - Method in interface nxopen.Selection
-
- setSelectionColor(int) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the selection color.
- setSelectionEnum(RenameDialogeBuilder.SelectionTypeAPI) - Method in interface nxopen.linedesigner.RenameDialogeBuilder
-
License requirements: None.
- setSelectionFilter(String, Selection.SelectionAction, Selection.MaskTriple[]) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the filter for the given property name.
- setSelectionFilter(Selection.SelectionAction, Selection.MaskTriple[]) - Method in interface nxopen.blockstyler.SelectObject
-
Sets the SelectionFilter
License requirements: None.
- setSelectionFilter(MountPointBuilder.GeometrySelectionFilterType) - Method in interface nxopen.presslinesimulation.MountPointBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setSelectionFilter(ObjectAttributeManagementBuilder.FilterType) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectionFilterAccordingToAttribute(ObjectAttributeManagementBuilder.FilterAccordingToAttributeType) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectionFilterToggle(boolean) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: None.
- setSelectionMask(SelectionHandle, Selection.SelectionAction, Selection.MaskTriple[]) - Method in interface nxopen.Selection
-
Sets the types of objects that are selectable.
- setSelectionMethod(DPMItpBuilder.SelectionMethodOption) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSelectionMethod(MaterialEstimationBuilder.SelectionMethods) - Method in interface nxopen.features.shipdesign.MaterialEstimationBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSelectionMethod(WeightAndCGBuilder.SelectionMethods) - Method in interface nxopen.features.shipdesign.WeightAndCGBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSelectionMethodType(SurfaceCoatBuilder.SelectionMethod) - Method in interface nxopen.cae.SurfaceCoatBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSelectionModeAsString(String) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setSelectionOption(TBSLoadCaseManager.SelectionType) - Method in interface nxopen.cae.optimization.TBSLoadCaseManager
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSelectionParameters(PostScenarioSelectionParameters) - Method in interface nxopen.cae.PostScenarioBuilder
-
- setSelectionRadiusType(SelPref.SelectionRadius) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setSelectionRecipe(SelectionRecipe) - Method in interface nxopen.cae.connections.SelectionRecipeLocation
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSelectionRecipes(SelectionRecipe[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set Selection Recipes to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSelectionRuleType(SelPref.SelectionRule) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setSelectionScope(LoadInterpartDataBuilder.SelectionScopeType) - Method in interface nxopen.assemblies.LoadInterpartDataBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setSelectionScope(ObjectSelector.Scope) - Method in interface nxopen.ObjectSelector
-
License requirements: None.
- setSelectionStatusOfUserDefinedClass(UserDefinedClass, boolean) - Method in interface nxopen.Selection
-
Sets whether or not the user defined class is available for selection.
- setSelectionType(BoundaryBuilder.SelectionMethod) - Method in interface nxopen.annotations.BoundaryBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSelectionType(ConvertDraftingContentsBuilder.SelectConversionEntityType) - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSelectionType(EndCutBuilder.SelectionTypes) - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setSelectionType(MirrorShipStructureBuilder.Types) - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSelectionType(ShipCoordinatesBuilder.Selection) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setSelectionType(VerifyPenetrationBuilder.SelectionDialogType) - Method in interface nxopen.features.shipdesign.VerifyPenetrationBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setSelectionType(HoleReportBuilder.EnumSelectionType) - Method in interface nxopen.tooling.HoleReportBuilder
-
License requirements: None.
- setSelectionType(RemoveHolesBuilder.SelectionTypes) - Method in interface nxopen.tooling.RemoveHolesBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectionType(WeldSelectionType) - Method in interface nxopen.weld.WeldPointBuilder
-
Set the selection type
License requirements: ugweld ("UG WELD")
.
- setSelectionTypeEnum(DisplayNodalCsysBuilder.NodesToDisplayType) - Method in interface nxopen.cae.DisplayNodalCsysBuilder
-
License requirements: None.
- setSelectMask(int, int, int[]) - Method in interface nxopen.uf.UFUi
-
- setSelectMethod(BooleanRegionSelect.SelectOption) - Method in interface nxopen.geometricutilities.BooleanRegionSelect
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSelectMode(ImportAutocadBlockBuilder.FileFolder) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSelectMode(ImportSymbolBuilder.FileFolder) - Method in interface nxopen.annotations.ImportSymbolBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSelectModeAsString(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setSelectModeAsString(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setSelectModeAsString(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setSelectModeAsString(String) - Method in interface nxopen.blockstyler.SelectElement
-
License requirements: None.
- setSelectModeAsString(String) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setSelectModeAsString(String) - Method in interface nxopen.blockstyler.SelectNode
-
License requirements: None.
- setSelectModeAsString(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setSelectMountingInterfaceLocation(SelectMountingInterfaceLocationBuilder) - Method in interface nxopen.ame.ProjectEngineeringObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectMountingInterfaceLocation(SelectMountingInterfaceLocationBuilder) - Method in interface nxopen.ame.Snap3DModelsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSelectOffsetSpreadsheet(String) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectOption(CopyPasteBuilder.ParentSelectOption) - Method in interface nxopen.features.CopyPasteBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSelectPlane(Plane) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSelectPoint(Point) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSelectPoint(Point) - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSelectPoint(Point) - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSelectPoint(Point) - Method in interface nxopen.linedesigner.RailOpeningFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSelectPoint(Point) - Method in interface nxopen.mechatronics.TracerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSelectPoint(Point) - Method in interface nxopen.tooling.SectionLineCreationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectPoint(Point) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectSectionOri(Direction) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSelectSpreadsheet(String) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectStandardSetsSpreadsheet(String) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectStartPlane(Plane) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSelectSubHoleFaceAutomatically(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectSubTypeAsString(String) - Method in interface nxopen.blockstyler.SelectElement
-
License requirements: None.
- setSelectToolFlag(boolean) - Method in interface nxopen.cam.OperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSelectType(SelectionHandle, Selection.UistylerSelectionType) - Method in interface nxopen.Selection
-
Sets the selection type.
- setSelectTypes(PocketBuilder.ToolType) - Method in interface nxopen.tooling.PocketBuilder
-
License requirements: None.
- setSelectUV(int) - Method in interface nxopen.features.SnipSurfaceBuilder
-
License requirements: None.
- setSelectVector(Direction) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelectVector(Direction) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSelfHidden(boolean) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the status of self hidden.
- setSelfHidden(boolean) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSelfHidden(boolean) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the status of self hidden.
- setSelfIntersection(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setSelfIntersectionChecking(TBSSmoothBuilder.SelfIntersectionCheckingOption) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSelfIntersections(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSelFootType(SubInsertBuilder.Shape) - Method in interface nxopen.tooling.SubInsertBuilder
-
License requirements: None.
- setSelType(EdgePatchBuilder.SelectTypes) - Method in interface nxopen.tooling.EdgePatchBuilder
-
License requirements: None.
- setSelType(ElectrodeCopyBuilder.Copy) - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
License requirements: None.
- setSemiMajor(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSemiMinor(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSendLayoutsTo(DxfdwgImporter.SendLayoutsAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setSendModelDataTo(DxfdwgImporter.SendModelDataAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setSensitivity(int, boolean) - Method in interface nxopen.uistyler.ButtonLayout
-
Sets the sensitivity
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.ColorTool
-
Sets the sensitivity
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.DialogItem
-
Specifies the sensitivity of the dialog.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.GroupBox
-
Sets the sensitivity
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.IntegerItem
-
Sets the sensitivity of Integer item
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.IntegerScale
-
Sets the sensitivity of the dialog item.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.LabelItem
-
Sets the seisitivity of the dialog item
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.MultiSelectList
-
Sets the senstivity
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.MultiTextBox
-
Sets the sensitivity of the dialog item.
- setSensitivity(int, boolean) - Method in interface nxopen.uistyler.OptionMenu
-
Sets the sensitivity
License requirements: None.
- setSensitivity(int, boolean) - Method in interface nxopen.uistyler.OptionToggle
-
Set the sesitivity
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.PropertyPage
-
Sets the sensitivity of property page.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.PushButton
-
Sets the senstivity of dialog.
- setSensitivity(int, boolean) - Method in interface nxopen.uistyler.RadioBox
-
Sets the sensitivity
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.RealItem
-
Sets the sensitivity
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.RealScale
-
Sets the sensitivity
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.RowColumn
-
Sets the sensitivity
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.ScrolledWindow
-
Sets
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.SelectionBox
-
Sets the sensitivity of the selection box
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.SingleSelectList
-
Sets the sensitivity of the single select list
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.StringItem
-
Specifies the sensitivity of the dialog item.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.TabControl
-
Sets the sensitivity of the dialog item
License requirements: None.
- setSensitivity(int, boolean) - Method in interface nxopen.uistyler.Toggle
-
Sets the sensitivity of the toggle button
License requirements: None.
- setSensitivity(int, boolean) - Method in interface nxopen.uistyler.ToolPalette
-
License requirements: None.
- setSensitivity(boolean) - Method in interface nxopen.uistyler.WideString
-
Sets the sensitivity of the wide string
License requirements: None.
- setSensitivityValues(double[]) - Method in interface nxopen.cae.ModelUpdateSensitivityViewerBuilder
-
Sets the sensitivity values
License requirements: nx_correl_update ("FE Model Update")
.
- setSensor(NXObject) - Method in interface nxopen.motion.PlantOutputBuilder
-
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- setSensor(MotionSensor) - Method in interface nxopen.motion.SignalChartListItem
-
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setSensorCoordinateType(SensorCoordinateType) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSensorDirectionX(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSensorDirectionY(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSensorDirectionZ(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSensorGroup(InspectionGroup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorName(String) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorOpLabel(String) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorOpName(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorOpName(String) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorOpName(String) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorResultType(SensorResultType) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSensorRotationX(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSensorRotationY(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSensorRotationZ(boolean) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSensorStrategy(InspectionMoveBuilder.SensorStrategyTypes) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorStrategy(InspectionMoveBuilder.SensorStrategyTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorStrategy(InspectionMoveBuilder.SensorStrategyTypes) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorStrategy(InspectionSensorMassEditBuilder.SensorStrategyType) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorTipDiameter(double) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorTipIjk(double[]) - Method in interface nxopen.cam.InspectionSensorBuilder
-
Set the sensor tip location vector coordinates
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorTipLength(double) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorTipLocation(InspectionSensorBuilder.SensorTipLocationTypes) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorTipSize(double) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorTipType(InspectionSensorBuilder.SensorTipTypes) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorTipXyz(double[]) - Method in interface nxopen.cam.InspectionSensorBuilder
-
Set the sensor tip location cartesian coordinates
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorType(SensorType) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSensorType(InspectionSensorBuilder.SensorTypes) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSensorVector(Direction) - Method in interface nxopen.cae.responsesimulation.SensorBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSeparateSuppression(boolean) - Method in interface nxopen.positioning.ComponentConstraint
-
An inherited
ComponentConstraint
can be suppressed independently of the constraint it is
derived from.
- setSeparator(ChamferSeparatorType) - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Sets the separator type
License requirements: None.
- setSeparator(String) - Method in interface nxopen.drawings.ViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSequence(TurnRoughFinishTestCut.SequenceTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setSequenceDescription(Tag, String) - Method in interface nxopen.uf.UFAssem
-
- setSequenceDirection(InspectionMethodBuilder.PolarSequenceDirectionTypes) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSequenceMethod(BranchPathNumberingBuilder.Sequence) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setSequenceName(Tag, String) - Method in interface nxopen.uf.UFAssem
-
- setSequenceNumber(int) - Method in interface nxopen.weld.GrooveBuilder
-
- setSequenceNumber(int) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the sequence number for the weld point feature.
- setSequenceOfObjectReplacement(NXObject[]) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The method that sets the sequence of object replacement
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setSequenceOptimization(InspectionPathBuilder.SequenceType) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSequenceOptimization(InspectionPathBuilder.SequenceType) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSequenceStart(InspectionMethodBuilder.PolarSequenceStartTypes) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSeriesSpacing(double) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setServerProgID(String) - Method in interface nxopen.mechatronics.OPCClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setServerTags(String, OPCUAClientBuilder.TagInfo[]) - Method in interface nxopen.mechatronics.OPCUAClientBuilder
-
Sets OPC UA instance Tags
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setServerType(OPCClientBuilder.ServerOption) - Method in interface nxopen.mechatronics.OPCClientBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSessionBannerOptions(UFPlot.BannerOptions) - Method in interface nxopen.uf.UFPlot
-
- setSessionCustomColors(UFCgm.CustomColors) - Method in interface nxopen.uf.UFCgm
-
- setSessionCustomColors(UFCgm.CustomColors) - Method in interface nxopen.uf.UFPlot
-
- setSessionCustomWidths(UFCgm.CustomWidths) - Method in interface nxopen.uf.UFCgm
-
- setSessionCustomWidths(UFCgm.CustomWidths) - Method in interface nxopen.uf.UFPlot
-
- setSessionDelay(boolean) - Method in interface nxopen.uf.UFWave
-
- setSessionExportOptions(UFCgm.ExportOptions) - Method in interface nxopen.uf.UFCgm
-
- setSessionJobOptions(UFPlot.JobOptions) - Method in interface nxopen.uf.UFPlot
-
- setSessionNotes(String[]) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Set the notes that are to be stored with the tire envelope feature.
- setSessionTranslucency(ObjectPreferences.Translucency) - Method in interface nxopen.preferences.ObjectPreferences
-
Sets the session translucency
License requirements: None.
- setSetApproachToggle(boolean) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Set the set approach toggle
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setSetAsMyDefaultTask(boolean) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setSetback(DeleteFaceBuilder.SetbackOptions) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSetbackMethod(StiffenerBySupportPathBuilder.SetBackMethod) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSetbackOption(EdgeBlendBuilder.Setback) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSetbackPoint(Point) - Method in interface nxopen.geometricutilities.BlendSetbackBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSetGunApproachBuilder(SetGunApproachBuilder) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Set set gun approach builder
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setSetMatOriMethod(ShellEADBuilder.MaterialOrientationMethod) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSettings(CreateComponentFrom3DSettingsBuilder) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.AcisExporter
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.AcisImporter
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSettingsFile(String) - Method in interface nxopen.Catiav4Creator
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.Catiav4Importer
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.Catiav5Creator
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.ProeImporter
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.Step203Creator
-
- setSettingsFile(String) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.Step214Creator
-
- setSettingsFile(String) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setSettingsFile(String) - Method in interface nxopen.VirtuallabImporter
-
License requirements: None.
- setSettingsOrigination(GeneralWorkFlowBuilder.SettingsOrientationType) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSettingsToggle(boolean) - Method in interface nxopen.features.MapleBuilder
-
- setSettingWithoutFalseBody(boolean) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSettingWithoutFalseBody(boolean) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setSetup(InspectionSetup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSetup(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setSetupName(String) - Method in interface nxopen.sim.SaveSnapshotBuilder
-
Sets the setup name
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setSeverityOption(RequirementBuilder.SeverityOptions) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setSew(boolean) - Method in interface nxopen.AcisImporter
-
License requirements: None.
- setSewAllFaces(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSewAllFaces(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSewAllInstances(boolean) - Method in interface nxopen.features.SewBuilder
-
- setSewn(boolean) - Method in interface nxopen.die.AddSurfBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSewSurfaces(boolean) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setSewSurfaces(boolean) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setSewSurfaces(boolean) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setSewSurfaces(boolean) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setSewToBody(boolean) - Method in interface nxopen.features.BlendCornerBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSewTolerance(double) - Method in interface nxopen.tooling.DieEngStampingOutputBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSewTolerance(double) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
License requirements: None.
- setSgrpCoordinates(String, String, String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the SgRP point by coordinates, L31, W20, H70
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setSgrpPoint(Point) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSgrpPoint(Point) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Set the SgRP point by an existing point
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setShadedAlignFacets(boolean) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setShadedAngleTol(FacetSettingsBuilder.ShadedToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder
-
Sets the angle tolerance for a given tolerance set for Shaded Views
License requirements: None.
- setShadedCutFaceColor(int) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the shaded cut face color.
- setShadedCutFaceColor(int) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the shaded cut face color.
- setShadedDisplay(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setShadedEdgeColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShadedEdgeColor(NXColor) - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShadedEdgeColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings2d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShadedEdgeColor(NXColor) - Method in interface nxopen.cae.MeshDisplaySettings3d
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShadedEdgeColor(int) - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Sets the edge color for shaded faces in the view.
- setShadedEdgeOptions(Tag) - Method in interface nxopen.uf.UFView
-
- setShadedEdgeStyle(ViewVisualizationVisual.ShadedEdgeStyleType) - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Sets the edge display style for shaded faces in the view.
- setShadedEdgeTol(FacetSettingsBuilder.ShadedToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder
-
Sets the edge toleramce for a given tolerance set for Shaded Views
License requirements: None.
- setShadedFaceTol(FacetSettingsBuilder.ShadedToleranceSetting, double) - Method in interface nxopen.display.FacetSettingsBuilder
-
Sets the face tolerance for a given tolerance set for Shaded Views
License requirements: None.
- setShadedFacetRatio(double) - Method in interface nxopen.display.FacetSettingsBuilder
-
- setShadedFacetScale(FacetSettingsBuilder.FacetScale) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setShadedFacetToViewRatio(FacetSettingsBuilder.FacetToViewRatio) - Method in interface nxopen.display.FacetSettingsBuilder
-
- setShadedGeometry(boolean) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setShadedGeometry(boolean) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setShadedGeometry(boolean) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setShadedGeometry(boolean) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setShadedPlane(boolean) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
License requirements: geometric_tol ("GDT")
.
- setShadedRefinementFactor(double) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setShadedTolerance(FacetSettingsBuilder.ShadedToleranceSetting) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setShadedUpdate(FacetSettingsBuilder.FacetUpdate) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setShadedViewFacetTolerances(PartVisualizationShade.ShadedViewToleranceType, double, double, double) - Method in interface nxopen.preferences.PartVisualizationShade
-
Sets the edge, face and angle tolerances to be used with the specified
tolerance set for shaded views.
- setShadedViewsType(SelPref.ShadedViews) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setShadedViewTolerance(PartVisualizationShade.ShadedViewToleranceType) - Method in interface nxopen.preferences.PartVisualizationShade
-
Sets the tolerance for shaded views.
- setShadedViewUpdateMode(PartVisualizationShade.ViewUpdateModeType) - Method in interface nxopen.preferences.PartVisualizationShade
-
Sets the update mode for shaded views.
- setShadeGraphicSymbol(boolean) - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Sets the flag indicating whether or not shading of graphic symbols is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShadeGraphicSymbol(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the flag indicating whether or not shading of graphic symbols is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShadeSymbols(boolean) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setShadeTolerance(ShadingToleranceOption) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShading(UFPatt.Switch) - Method in interface nxopen.uf.UFPatt
-
- setShadingTolerance(ShadingToleranceOption) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the shading tolerance.
- setShadingTolerance(ShadingToleranceOption) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the shading tolerance.
- setShadowCastingDisabled(boolean) - Method in interface nxopen.display.CgfxMattexBuilder
-
- setShadows(boolean) - Method in interface nxopen.ModelingViewHighQualityImage
-
Sets the setting for whether the High Quality Image is to contain shadows
License requirements: None.
- setShadowsEnabled(boolean) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setShadowSoftness(double) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setShadowType(ImageBasedLighting.ShadowsType) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setShankDiameter(double) - Method in interface nxopen.cae.connections.ConnectionData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setShankShape(InsertAuxiliaryBuilder.ShankShapeTypes) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setShape(BoundaryTurnMemberCorner.ShapeType) - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
License requirements: cam_base ("CAM BASE")
.
- setShape(DirectionOption, IProfile[]) - Method in interface nxopen.die.PadChildBuilder
-
Sets the shape profile of the die pad.
- setShape(GussetBuilder.Shapes) - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setShape(WheelFixingBuilder.ShapeType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShape(ElectrodeBlankBuilder.BlankShape) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setShapeControl(double) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShapeControl(StyledBlendBuilder.StyledBlendShapeControlType) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setShapeControlFirstCurve(double) - Method in interface nxopen.features.CircularBlendCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShapeControlMethod(BridgeCurveBuilderEx.ShapeControlMethods) - Method in interface nxopen.features.BridgeCurveBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setShapeControlOption(BridgeCurveBuilder.ShapeControlTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setShapeControlSecondCurve(double) - Method in interface nxopen.features.CircularBlendCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShapeControlType(FillHoleBuilder.ShapeControlTypes) - Method in interface nxopen.features.FillHoleBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.
- setShapeDetail(Body[]) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the shape detail of the form task for bodies
License requirements: die_engineering ("DIE ENGINEERING")
.
- setShapeDetail(Body[]) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the shape detail of the form task.
- setShapeDetailByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the shape detail of the flange task for profiles
License requirements: die_engineering ("DIE ENGINEERING")
.
- setShapeDetailByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the shape detail of the form task using a profile.
- setShapeHighlight(boolean) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setShapeMatch(int) - Method in interface nxopen.features.ReplaceBlendBuilder
-
License requirements: None.
- setShapeMethod(LocalOffsetBuilder.ShapeMethodType) - Method in interface nxopen.facet.LocalOffsetBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setShapeName(String) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setShapeOption(AestheticFaceBlendBuilder.ShapeType) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
- setShapePreserved(boolean) - Method in interface nxopen.features.RuledBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setShapeProperties(CollisionSensorBuilder.ShapePropertiesOption) - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setShapeSkewOption(ConicCrossSection.ShapeSkewMethod) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShapeType(LaserProfileMove.ShapeTypes) - Method in interface nxopen.cam.LaserProfileMove
-
License requirements: cam_base ("CAM BASE")
.
- setShapeType(PadChildBuilder.ShapeTypeOption) - Method in interface nxopen.die.PadChildBuilder
-
Sets the shape type of the die pad.
- setShapeType(PadParentBuilder.ShapeTypeOption) - Method in interface nxopen.die.PadParentBuilder
-
Sets the shape type of die pads.
- setShapeType(PierceHoleChildBuilder.ShapeTypeOption) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the pierce hole shape type
License requirements: ug_die_design ("Die Design")
.
- setShapeValue(double) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setSharedSuppressed(boolean) - Method in interface nxopen.positioning.ComponentConstraint
-
Set the shared suppression state of this
ComponentConstraint
used across all
arrangements where the constraint is not arrangement specific.
- setShareGeometriesOption(SessionModeling.ShareGeometriesOnSaveType) - Method in interface nxopen.preferences.SessionModeling
-
Sets the option " Share Geometry on Save " gives choice of whether to share geometries among Parasolid solid entities on save or not
License requirements: None.
- setSharpEdgeLineFont(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setShearCenter(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShedModeToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setSheet(boolean) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSheet(boolean) - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSheet(boolean) - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSheetBodies(boolean) - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSheetBodyExportOption(STLCreator.SheetBodyExportOptionEnum) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setSheetBodyLayer(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSheetCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSheetElements(SheetElement[]) - Method in interface nxopen.diagramming.BulkEditBuilder
-
Sets the sheet elements for bulk editing.
- setSheetElements(SheetElement[]) - Method in interface nxopen.pid.BulkEditBuilder
-
Sets the sheet elements for bulk editing.
- setSheetGeometryToSketch(boolean) - Method in interface nxopen.ASCImporter
-
License requirements: nx_layout ("NX Layout")
.
- setSheetMetal(Body) - Method in interface nxopen.die.DrawDiePunchBuilder
-
Sets the sheet metal of the draw die punch casting.
- setSheetMetal(Body) - Method in interface nxopen.die.RotorBuilder
-
Sets the sheet metal of the rotor casting.
- setSheetMetal(Body) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the sheet metal of the die steelinsert
License requirements: ug_die_design ("Die Design")
.
- setSheetMetalDistance(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the sheet metal distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- setSheetMetalDistance(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Sets the sheet metal distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setSheetMetalPartName(String) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setSheetMetalThickness(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setSheetMethod(CalculateAreaBuilder.SheetMethodType) - Method in interface nxopen.tooling.CalculateAreaBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setSheetName(String) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSheetName(EWDraftingBuilder.NameOption) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setSheetNumber(int) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setSheetNumber(int) - Method in interface nxopen.Spreadsheet
-
Sets the worksheet with specified index as current worksheet
License requirements: None.
- setSheets(NXObject[]) - Method in interface nxopen.PlotSourceBuilder
-
Sets all the sheets in the part file
License requirements: None.
- setSheetScale(String) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSheetScale(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSheetThickness(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSheetTitle(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setSheetToDeform(ScCollector) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: None.
- setShelfEnd(boolean) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setShelfPoint1(Point) - Method in interface nxopen.features.PatchOpeningsBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setShelfPoint2(Point) - Method in interface nxopen.features.PatchOpeningsBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
.
- setShelfType(ShelfBuilder.Types) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setShellData(FEElement, double[], double[], double, PhysicalPropertyTable, CaeElementAssociatedDataUtilsMatOrientationMethod, CoordinateSystem, double, CaeElementAssociatedDataUtilsCsysDataType, Point3d, Point3d, Point3d, int) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets shell element associated data.
- setShellDataLocation(NodalFunctionEvalShellLocation) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setShellElementFace(StrainGageShellElementFaceType) - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setShellEvaluationLocation(ShellElementEvaluationLocation) - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setShellLayer(TBSLoadCase.LayerOption) - Method in interface nxopen.cae.optimization.TBSLoadCase
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setShellLocation(DataLocation.Shell) - Method in interface nxopen.cae.responsesimulation.DataLocation
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setShellOptions(PartVisualizationEmphasis.ShellOptions) - Method in interface nxopen.preferences.PartVisualizationEmphasis
-
Modifies options that control the appearance of de-emphasized
shaded geometry when the See-Thru style is set to Shell.
- setShellRegion(DurabilityStressAxesBuilder.ShellRegionEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setShellResultantFx(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setShellResultantFxy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setShellResultantFy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setShellResultantMx(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setShellResultantMxy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setShellResultantMy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setShellResultantQx(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setShellResultantQy(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setShellSect(Result.Section) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShellSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultAllOptions
-
Set the shell section for shell stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShellSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultDirectionSectionOptions
-
Set the shell section for shell stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShellSection(Result.Section) - Method in interface nxopen.cae.ResultMeasureResultSectionOptions
-
Set the shell section for shell stress/strain results
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShellStress(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setShellStressRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setShellThickness(String, int, Tag[]) - Method in interface nxopen.uf.UFSf
-
- setShift(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setShiftStatus(boolean) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setShimHeight(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShimOffset(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShininess(double) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the shininess tolerance.
- setShininess(double) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the shininess tolerance.
- setShininessData(double) - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Sets the shininess value.
- setShininessScale(double) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShipDrawingObject(String, boolean) - Method in interface nxopen.drawings.ShipDraftingViewLinesViewStyle
-
Note: The initial values are set based on the file NX_ShipAttribute.xml
The status determines the line settings for the ship feature in a view.
- setShipDrawingObject(String, boolean) - Method in interface nxopen.preferences.ShipDraftingViewLinesViewPreferences
-
Note: The initial values are set based on the file NX_ShipAttribute.xml
The status determines the line settings for the ship feature in a view.
- setShipLibType(UpdateShipLibraryBuilder.ShipLibOptionType) - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setShipNo(int) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setShipObjectType(ShipnamesBuilderType) - Method in interface nxopen.features.shipdesign.ShipNamesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setShipStructureType(ShipDesignPreferencesBuilder.Types) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setShipType(DDAMExcitation.ShipType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSHMInstance(String, SHMSignalClientBuilder.EndianType, String) - Method in interface nxopen.mechatronics.SHMSignalClientBuilder
-
Set SHM Client Instance Base Information
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setShmMutex(String) - Method in interface nxopen.mechatronics.SHMSignalProviderBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSHMName(String) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setShmName(String) - Method in interface nxopen.mechatronics.SHMSignalProviderBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSHMSignalAccess(SHMSignalConnectionBuilder.SHMSignalAccessType) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSHMSignalName(String) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSHMSignals(SHMSignalProviderBuilder.SignalInfo[]) - Method in interface nxopen.mechatronics.SHMSignalProviderBuilder
-
Set SHMProvider Signals Infomation
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSHMSignalType(SHMSignalConnectionBuilder.DataType) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setShockDriverJointSteps(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShortDescription(String) - Method in interface nxopen.routing.DesignRuleViolation
-
Sets the short description of the design rule violation is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setShouldCopySketchBase(boolean) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Sets
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setShouldCopySketchColumn(boolean) - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Sets
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setShow(boolean) - Method in interface nxopen.blockstyler.UIBlock
-
License requirements: None.
- setShow(boolean) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setShow(boolean) - Method in interface nxopen.display.SectionCurveSettingsBuilder
-
License requirements: None.
- setShow3dMaterialRemoval(boolean) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Sets the show 3d material removal
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setShowAddButton(boolean) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setShowAddNewSet(boolean) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setShowAdjacentBlends(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowAllDatumAxes(boolean) - Method in interface nxopen.SketchAlongPathBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setShowAngleLeadingZeros(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the status of leading zeros display in view angle.
- setShowAngleLeadingZeros(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of leading zeros display in view angle.
- setShowAngleTrailingZeros(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the status of trailing zeros display in view angle.
- setShowAngleTrailingZeros(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of trailing zeros display in view angle.
- setShowAnnotations(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setShowAxis(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowAxisSubBlock(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowBackground(boolean) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
License requirements: None.
- setShowBackgroundPlane(boolean) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
License requirements: None.
- setShowBlindVolume(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowBoundbox(boolean) - Method in interface nxopen.tooling.WorkpieceBuilder
-
License requirements: None.
- setShowBreakLines(boolean) - Method in interface nxopen.drawings.ViewBreakBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowCap(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setShowCenterLines(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowCenterPoint(boolean) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowChannels(boolean) - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowCheckBoundaryStatus(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowClearance(boolean) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowClip(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setShowClippedGhost(boolean) - Method in interface nxopen.cae.ClippingParameters
-
Set show clipped ghost
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setShowColumnHeadings(boolean) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setShowColumns(HoleTableSettingsFormatBuilder.ShowColumnsType) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowComb(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setShowCombs(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setShowCracks(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShowCrosshairsToggle(boolean) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setShowCurves(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
- setShowCutting(boolean) - Method in interface nxopen.cam.PathDisplay
-
License requirements: None.
- setShowDefaultVal(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowDeleteButton(boolean) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setShowDemoCylinder(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowDemoCylinderRay(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowDescription(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowDeviation(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setShowDiameterSymbol(boolean) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShowDimension(boolean) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setShowDimensions(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowDistanceMeasurement(boolean) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowEdgesHiddenByEdges(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowEndpoints(boolean) - Method in interface nxopen.cam.PathDisplay
-
License requirements: None.
- setShowEndPoints(Curve, boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay
-
Sets a flag representing end points display state of a curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShowEPLAN(boolean) - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowExcludes(boolean) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
License requirements: None.
- setShowExpandCollapseMarker(boolean) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setShowExtendedEyes(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowEyeLabels(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowEyePoints(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowFacetEdge(boolean) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setShowFacetEdges(boolean) - Method in interface nxopen.display.FacetSettingsBuilder
-
License requirements: None.
- setShowFacetEdges(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowFacetEdges(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flag indicating whether to display facet edges in shaded member views.
- setShowFacetEdges(boolean) - Method in interface nxopen.preferences.SessionVisualizationShade
-
Sets the show facet edge flag.
- setShowFaceWithoutColorAttributeToggle(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setShowFaceWithSameColorAttributeToggle(boolean) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setShowFailedElementsLabel(boolean) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setShowFlag(boolean) - Method in interface nxopen.cae.ShowHideBuilder
-
License requirements: None.
- setShowFlag(Curve, CurveAnalysisDisplay.ShowFlagType, boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay
-
- setShowFlag(DisplayableObject, SurfaceAnalysisDisplay.ShowFlagType, boolean) - Method in interface nxopen.geometricanalysis.SurfaceAnalysisDisplay
-
Sets show flags
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShowFlowDirectionAndOriginCurve(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setShowFlowDirectionAndOriginCurve(boolean) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setShowFlowDirectionAndOriginCurve(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setShowFocusHandle(boolean) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setShowFocusHandle(boolean) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setShowFocusHandle(boolean) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setShowFocusHandle(boolean) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setShowFrequencyBandSummation(boolean) - Method in interface nxopen.cae.xyplot.GraphOptionsStyle2D
-
License requirements: None.
- setShowGraph(boolean) - Method in interface nxopen.optimization.DesignStudyBuilder
-
License requirements: None.
- setShowGraph(boolean) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setShowGrid(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setShowGrid(boolean) - Method in interface nxopen.preferences.WorkPlane
-
Sets the show and hide grid flag.
- setShowHandle(boolean) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setShowHandle(boolean) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setShowHandle(boolean) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setShowHandleHints(boolean) - Method in interface nxopen.preferences.VisualizationHandles
-
Sets the show handle hints flag.
- setShowHeader(boolean) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setShowHiddenLines(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowInadequateStretch(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShowInAutomation(boolean) - Method in interface nxopen.ame.AspectDetailsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInAutomation(boolean) - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInAutomation(boolean) - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInflection(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setShowInflectionPoints(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShowInflectionPointsEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShowInflections(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setShowInfo(boolean) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setShowInformationWindow(boolean) - Method in interface nxopen.facet.STLImportBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setShowInformationWindow(boolean) - Method in interface nxopen.features.MathIntegrationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShowInfoWindow(boolean) - Method in interface nxopen.tooling.StandardPartBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR ug_die_design ("Die Design")
.
- setShowInFunction(boolean) - Method in interface nxopen.ame.AspectDetailsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInFunction(boolean) - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInFunction(boolean) - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInGraphicView(boolean) - Method in interface nxopen.features.ConstructionFeatureData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShowInGraphicView(boolean) - Method in interface nxopen.features.OutputFeatureData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShowInLocation(boolean) - Method in interface nxopen.ame.AspectDetailsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInLocation(boolean) - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInLocation(boolean) - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInProduct(boolean) - Method in interface nxopen.ame.AspectDetailsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInProduct(boolean) - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInProduct(boolean) - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowInterference(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setShowInteriorFeatureCurves(boolean) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setShowIsoclineNegative(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShowIsoclinePositive(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShowKnot(Curve, boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay
-
Sets a flag representing knots display state of a b-spline curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShowKnot(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setShowLabel(boolean) - Method in interface nxopen.blockstyler.LineColorFontWidth
-
License requirements: None.
- setShowLabel(BoundedGridBuilder.ShowLabelType) - Method in interface nxopen.display.BoundedGridBuilder
-
License requirements: None.
- setShowLabels(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowLabels(boolean) - Method in interface nxopen.preferences.WorkPlane
-
Sets the show and hide grid labels flag.
- setShowLabelWithLeader(boolean) - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowLayoutOrigin(boolean) - Method in interface nxopen.layout2d.GeneralPreferencesBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setShowLeadersToggle(boolean) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setShowLengthEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShowLockedDeletedContent(TabularNoteStyleBuilder.ShowLockedDeletedRowMethod) - Method in interface nxopen.annotations.TabularNoteStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setShowLockedDeletedRows(PartsListBuilder.PartsListShowLockedDeletedRows) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setShowMaintainLayerOption(boolean) - Method in interface nxopen.blockstyler.LayerBlock
-
License requirements: None.
- setShowMajorLines(boolean) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setShowMapTopo(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowMarkup(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setShowMaximum(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setShowMaxLabels(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setShowMigratedBody(boolean) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Sets the show migrated body flag.
- setShowMigratedBody(boolean) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Sets the show migrated body flag.
- setShowMigratedBody(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Sets the show migrated body flag.
- setShowMinimum(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setShowMinLabels(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setShowModelViewBorders(boolean) - Method in interface nxopen.preferences.PartVisualizationNamesBorders
-
Sets the show model view border flag. allows to turn on and off the display of view borders.
- setShowModelViewNames(boolean) - Method in interface nxopen.preferences.PartVisualizationNamesBorders
-
Sets the show model view names flag.
- setShowMoveUpDownButtons(boolean) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setShowMultipleColumns(boolean) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setShowName(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowNeedle(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setShowNeedles(boolean) - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
License requirements: None.
- setShowNodeLabels(boolean) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setShowNodeLocations(boolean) - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setShowNoncutting(boolean) - Method in interface nxopen.cam.PathDisplay
-
License requirements: None.
- setShowOnlyPartModule(boolean) - Method in interface nxopen.features.PartModuleBuilder
-
- setShowOnTop(boolean) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setShowOptionLabels(boolean) - Method in interface nxopen.blockstyler.LineFont
-
License requirements: None.
- setShowOrderedAbscissa(boolean) - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D
-
License requirements: None.
- setShowOrderGrid(boolean) - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour
-
License requirements: None.
- setShowOriginalLayerOption(boolean) - Method in interface nxopen.blockstyler.LayerBlock
-
License requirements: None.
- setShowOutline(boolean) - Method in interface nxopen.cae.ClippingParameters
-
Set show outline
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setShowOutline(boolean) - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
License requirements: None.
- setShowOutline(boolean) - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting
-
License requirements: None.
- setShowOutline(boolean) - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting
-
- setShowOutline(boolean) - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
-
- setShowOutOfTolerance(boolean) - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setShowOutOfTolerance(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setShowOutRangeLabels(boolean) - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShowOverflowValues(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowPartAndClearanceHoleOnly(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShowPartingLine(boolean) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShowPath(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowPathPoints(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowPeak(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setShowPeakPoints(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShowPeakPointsEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShowPeaks(boolean) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setShowPendulum(boolean) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowPictures(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setShowPipe(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setShowPlacedFragments(boolean) - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowPlaneSubBlock(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowPlot(boolean) - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setShowPoint(boolean) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowPoints(boolean) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowPole(Curve, boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisDisplay
-
Sets a flag representing poles display state of a b-spline curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setShowPole(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setShowRays(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowRays(boolean) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowReferenceCalloutSuffix(boolean) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setShowReferenceGeometry(boolean) - Method in interface nxopen.layout2d.ComponentSettingsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setShowReferenceSubBlock(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowRemove(boolean) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setShowReorderControls(boolean) - Method in interface nxopen.blockstyler.SetList
-
License requirements: None.
- setShowReport(boolean) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setShowReportReference(boolean) - Method in interface nxopen.uf.UFModeling
-
- setShowRetainedAnnotations(boolean) - Method in interface nxopen.annotations.RetainedAnnotationsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowRiskOfCracks(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShowScaleValue(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setShowScaleValue(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setShowSceneControl(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowSectionLength(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShowSectionLine(ViewSectionLineBuilder.ShowSectionLineType) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowSelection(boolean) - Method in interface nxopen.blockstyler.SelectElement
-
- setShowSelection(boolean) - Method in interface nxopen.blockstyler.SelectNode
-
- setShowSelfHiddenLines(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowSetting(boolean) - Method in interface nxopen.tooling.PocketBuilder
-
License requirements: None.
- setShowSevereThinning(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShowShortcuts(boolean) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setShowShortcuts(boolean) - Method in interface nxopen.blockstyler.SpecifyPlane
-
License requirements: None.
- setShowShortcuts(boolean) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setShowShortcuts(boolean) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setShowSightRays(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowSimuationUiInModeling(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setShowSkeleton(boolean) - Method in interface nxopen.features.HumanBuilder
-
Set flag for show human skeleton
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setShowSmoothEdgeEndGapsLock(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowSmoothEdgeEndGapsValue(double) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowSmoothEdges(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowSmoothEdges(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowSoftwareBlocks(boolean) - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowSolids(boolean) - Method in interface nxopen.weld.PointMarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setShowSplineMinimumRadius(boolean) - Method in interface nxopen.routing.SplinePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setShowSrcTblVals(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowSubsetStructure(boolean) - Method in interface nxopen.assemblies.Subset
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setShowSurface(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowSurface(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowSurfaceAngles(boolean) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setShowTags(boolean) - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowTaskNavigator(boolean) - Method in interface nxopen.blockstyler.Wizard
-
License requirements: None.
- setShowText(boolean) - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
License requirements: None.
- setShowThroughAssemblyState(boolean) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the through assy coordinate system state
License requirements: ugweld ("UG WELD")
.
- setShowThroughDisplay(boolean) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setShowThroughWorkPartState(boolean) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the through work coordinate system state
License requirements: ugweld ("UG WELD")
.
- setShowThruState(boolean) - Method in interface nxopen.weld.JointmarkBuilder
-
Indicates whether the output objects should show thru on creation
License requirements: ugweld ("UG WELD")
.
- setShowToolCenter(boolean) - Method in interface nxopen.cam.PathDisplay
-
License requirements: None.
- setShowToolPath(boolean) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Sets the show tool path
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setShowToolTips(boolean) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setShowTorsoLine(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowTotalResponseLineForPolar(boolean) - Method in interface nxopen.cae.xyplot.GraphOptionsStyle2D
-
License requirements: None.
- setShowTotalResponseLineForVector(boolean) - Method in interface nxopen.cae.xyplot.GraphOptionsStyle2D
-
License requirements: None.
- setShowTraceLines(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowTransformVectors(boolean) - Method in interface nxopen.features.FreeTransformerBuilder
-
License requirements: None.
- setShowTransformVectors(boolean) - Method in interface nxopen.features.MeshTransformerBuilder
-
License requirements: None.
- setShowTwistRate(boolean) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setShowTypeEnum(ObjectAttributeManagementBuilder.ShowComponentsType) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShowUndefinedValues(DisplayPropertiesBuilder.ValuesEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- setShowUndefValues(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowUnderflowValues(boolean) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setShowUnplacedFragments(boolean) - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setShowUserDefinedLayerOption(boolean) - Method in interface nxopen.blockstyler.LayerBlock
-
License requirements: None.
- setShowUVGrids(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowVIEndGapsLock(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowVIEndGapsValue(double) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowViewer(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setShowViewLabel(boolean) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowViewLabel(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowViewLabel(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowViewScale(boolean) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowViewScale(boolean) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowViewScale(boolean) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowVirtualIntersections(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowVirtualIntersections(boolean) - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setShowVisionCone(MirrorCertificationBuilder.ShowVisionConeType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowVisualization(boolean) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setShowWebAngles(boolean) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setShowWidths(boolean) - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Sets the show widths flag.
- setShowWidths(boolean) - Method in interface nxopen.preferences.PartVisualizationLine
-
Sets the show widths option.
- setShowWireframe(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowWireframe(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setShowWorkCsys(boolean) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setShowWorkLayerOption(boolean) - Method in interface nxopen.blockstyler.LayerBlock
-
License requirements: None.
- setShowWrinkles(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShowWrinklingTendency(boolean) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setShowXAxis(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowXmlReport(boolean) - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setShowXmlReport(boolean) - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setShowXYPlane(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowXZPlane(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowYAxis(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowYZPlane(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowZAxis(boolean) - Method in interface nxopen.blockstyler.OrientXpress
-
License requirements: None.
- setShowZeroContour(boolean) - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setShrinkage(String) - Method in interface nxopen.tooling.InitProjectBuilder
-
License requirements: None.
- setShroudColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setSibling(CAMObject) - Method in interface nxopen.cam.InspectionMoveBuilder
-
Set sibling
License requirements: None.
- setSibling(CAMObject) - Method in interface nxopen.cam.MoveBuilder
-
Set sibling
License requirements: None.
- setSide(Post.ClipSide) - Method in interface nxopen.cae.ClippingParameters
-
Set side
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSide(CutSides.SideType) - Method in interface nxopen.cam.CutSides
-
License requirements: cam_base ("CAM BASE")
.
- setSide(PendulumPlacementBuilder.SideType) - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSide(HumanHandsDialogBuilder.HandType) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setSide(JointExitBuilder.BodySide) - Method in interface nxopen.weld.JointExitBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setSide1NormalVectorI(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide1NormalVectorJ(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide1NormalVectorK(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide1PointX(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide1PointY(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide1PointZ(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide2NormalVectorI(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide2NormalVectorJ(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide2NormalVectorK(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide2PointX(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide2PointY(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSide2PointZ(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSideAngle(String) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
- setSideAttributeValue(ShimBuilder.SideAttributeValues) - Method in interface nxopen.tooling.ShimBuilder
-
License requirements: None.
- setSideCrossPosition(CrashBarrierBuilder.CrossPositionType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSideCut(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setSideEdgeShapeOption(ExtendSheetBuilder.SideEdgeShape) - Method in interface nxopen.features.ExtendSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSideFromCenterlineEnum(PlatformEquipmentBuilder.SideFromCenterlineTypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSideLoading(String) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSideOverlapSide(CrashBarrierBuilder.SideOverlapSideType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSidePlanarFaces(NXObject, int) - Method in interface nxopen.tooling.FastenerAssy
-
Sets the side planar faces for the hole in the fastener assembly
License requirements: None.
- setSidePosition(CrashBarrierBuilder.SidePositionType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSidePositionObject(CrashBarrierBuilder.PositionObjectType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSideRailFeature(HeadImpactSideRail) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSideSeamDisplay(boolean) - Method in interface nxopen.annotations.LineWeldData
-
Sets the flag indicating whether the side seam is displayed
License requirements: None.
- setSideSeamHorizontalFlip(boolean) - Method in interface nxopen.annotations.LineWeldData
-
Sets the flag indicating whether the side seam is flipped in the horizontal
direction
License requirements: None.
- setSideSeamObjects(DisplayableObject[]) - Method in interface nxopen.annotations.LineWeldData
-
Sets the side seam objects.
- setSideSeamVerticalFlip(boolean) - Method in interface nxopen.annotations.LineWeldData
-
Sets the flag indicating whether the side seam is flipped in the vertical
direction
License requirements: None.
- setSideSeamView(DraftingView) - Method in interface nxopen.annotations.LineWeldData
-
Sets the view for which side seam is to be created.
- setSideShape(CrashBarrierBuilder.ShapeType) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSideStepMethod(MultiplePassesBuilder.StepMethodTypes) - Method in interface nxopen.cam.MultiplePassesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSidesType(int) - Method in interface nxopen.cam.MachiningRegionBuilder
-
License requirements: None.
- setSideUserDefineLength(boolean) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSidewall(EmbossSidewall) - Method in interface nxopen.features.EmbossRegion
-
Sets the emboss sidewall object
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSidewallOption(EmbossSidewall.SidewallMethod) - Method in interface nxopen.features.EmbossSidewall
-
Sets the method to create sidewall
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSidewallType(DimpleBuilder.SidewallTypeOptions) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Sets the side where the material must be added to the dimple.
- setSidewallType(DrawnCutoutBuilder.SidewallTypeOptions) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Sets the side where the material must be added to the Drawn Cutout.
- setSideWeb(BlankLayoutBuilder.SideWebOption) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setSightLineCutType(ShellTemplateBuilder.SightLineCutTypes) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setSignal(NXObject) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSignalChart(SignalChart) - Method in interface nxopen.motion.DriverOperation
-
License requirements: mechanisms ("MECHANISMS")
.
- setSignalChartType(SignalChartBuilder.Type) - Method in interface nxopen.motion.SignalChartBuilder
-
Sets the SignalChart type
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setSignalData(SignalAdapterBuilder.SignalData[]) - Method in interface nxopen.mechatronics.SignalAdapterBuilder
-
Sets all signal data.
- setSignalData(SignalBuilder.Signal) - Method in interface nxopen.mechatronics.SignalBuilder
-
Sets signal data.
- setSignalDataType(ExternalConnectionElementBuilder.DataType) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSignalIdentify(NXObject) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSignalName(String) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSignalObject(NXObject) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSignalObject(NXObject) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSignals(String, SHMSignalClientBuilder.SHMSignal[]) - Method in interface nxopen.mechatronics.SHMSignalClientBuilder
-
Set SHM Client Signal Infomation
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSignalTag(NXObject) - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSignedVonMisesStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSignificantPlaces(int) - Method in interface nxopen.cae.PostAnnotationPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSignificantPlaces(int) - Method in interface nxopen.cae.PostIdentifyPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSignificantPlaces(int) - Method in interface nxopen.cae.PostLegendPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSignificantPlaces(int) - Method in interface nxopen.cae.PostResultNavigatorPreference
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setSilhouettes(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the status of silhouettes curves, if true silhouettes for
selected drawing member views added else silhouettes removed
from the selected member views.
- setSilhouettes(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSilhouettes(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSilhouettes(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of silhouettes curves, if true silhouettes for
selected drawing member views are added else silhouettes are removed
from the selected member views.
- setSimitFolder(String) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSimitTemplate(String) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSimpleConstruction(boolean) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setSimpleCubicAlongSpine(boolean) - Method in interface nxopen.geometricutilities.LawBuilder
-
License requirements: None.
- setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.DatumData
-
Sets the SimpleDraftingAidPreferences object
License requirements: None.
- setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.DatumTargetData
-
Sets the SimpleDraftingAidPreferences object
License requirements: None.
- setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.FcfData
-
Sets the FCF preferences.
- setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.LabelData
-
Sets the SimpleDraftingAidPreferences object
License requirements: None.
- setSimpleDraftingAidPreferences(SimpleDraftingAidPreferences) - Method in interface nxopen.annotations.NoteData
-
Sets the SimpleDraftingAidPreferences object
License requirements: None.
- setSimpleHole(Point3d, boolean, ISurface, String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets parameters for simple hole
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setSimplifiedBoundaryToggle(boolean) - Method in interface nxopen.geometricutilities.PatternFill
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSimplifiedLayoutType(RectangularPattern.SimplifiedLayoutTypes) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setSimplify(double) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setSimplifyCurveOption(boolean) - Method in interface nxopen.SketchEvaluator
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSimplifyFacesandEdges(boolean) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setSimplifyGeometry(boolean) - Method in interface nxopen.AcisImporter
-
License requirements: None.
- setSimplifyGeometry(boolean) - Method in interface nxopen.Catiav4Importer
-
License requirements: None.
- setSimplifyGeometry(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setSimplifyGeometry(boolean) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setSimplifyGeometry(boolean) - Method in interface nxopen.ProeImporter
-
License requirements: None.
- setSimplifyGeometry(boolean) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setSimplifyGeometry(boolean) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setSimplifyGeometry(boolean) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setSimplifyPath(boolean) - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setSimplifyPath(boolean) - Method in interface nxopen.mechanicalrouting.MergeBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setSimplifyShapes(CutParametersSimplifyShapesTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setSimulationDisplay(SimulationOptionsBuilder.SimulationDisplayMode) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setSimulationJobPath(String) - Method in interface nxopen.presslinesimulation.ConvertFromDieValidationBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setSimulationObjects(SimSimulationObject[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set simulation objects to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSingle(int) - Method in interface nxopen.WidthDefinition
-
License requirements: None.
- setSingleDesignation(String) - Method in interface nxopen.mechatronics.SystemObject
-
Set the single designation including aspect, letter code and index.
- setSingleFaceSet(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSingleLeg(boolean) - Method in interface nxopen.drawings.RevolvedSectionLineBuilder
-
- setSingleLeg(boolean) - Method in interface nxopen.drawings.SectionLineSegmentsBuilder
-
License requirements: None.
- setSingleLineRepresentation(ShipbuildingLinesViewStyle.ShipbuildingLines, String, boolean) - Method in interface nxopen.drawings.ShipbuildingLinesViewStyle
-
Note: The initial values are set based on the customer defaults depending on
whether the feature is a Profile or a Plate.
- setSingleLineRepresentation(boolean) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSingleLineRepresentation(boolean) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSingleLineRepresentation(ShipbuildingLinesViewPreferences.ShipbuildingLines, String, boolean) - Method in interface nxopen.preferences.ShipbuildingLinesViewPreferences
-
Note: The initial values are set based on the customer defaults depending on
whether the feature is a Profile or a Plate.
- setSingleOffset(boolean) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setSingleOption(boolean) - Method in interface nxopen.cae.AssignNodalCSBuilder
-
License requirements: None.
- setSingleOption(boolean) - Method in interface nxopen.cae.NodeCreateBuilder
-
License requirements: None.
- setSinglePlyPerLayer(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSinglePlyPerLayer(boolean) - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSingleRoughnessValue(boolean) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSingleRoughnessValue(boolean) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setSingleSegment(boolean) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSingleSelect(boolean) - Method in interface nxopen.blockstyler.ListBox
-
License requirements: None.
- setSingleSelection(boolean) - Method in interface nxopen.features.StudioXformBuilder
-
- setSingleSelection(boolean) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSingleSelectionEntityNameDisplayed(boolean) - Method in interface nxopen.cae.SelectionRecipeDisplay
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSingleSidedArrowLineLength(double) - Method in interface nxopen.annotations.SingleSidedDisplayBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSingleSidedValue(String) - Method in interface nxopen.validate.RequirementBuilder
-
License requirements: None.
- setSingleSource(int) - Method in interface nxopen.WidthDefinition
-
License requirements: None.
- setSingleStep(IsvControlPanelBuilder.SingleStepType) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Sets the single step in Tool Path Based Simulation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setSingleStepMode(IsvControlPanelBuilder.SingleStepModeType) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Sets the single step mode in Machine Code Simulation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setSingleTubeUsed(boolean) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSingleWidth(double) - Method in interface nxopen.WidthDefinition
-
License requirements: None.
- setSize(double) - Method in interface nxopen.annotations.Centerline2dSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSize(double) - Method in interface nxopen.annotations.Centerline3dSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSize(double) - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSize(double) - Method in interface nxopen.annotations.CircleCenterlineSettingsBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSize(double) - Method in interface nxopen.annotations.IdSymbolBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSize(String) - Method in interface nxopen.annotations.LineWeldSideData
-
Sets the weld size
License requirements: None.
- setSize(double) - Method in interface nxopen.annotations.SymmetricalCenterlineSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSize(int) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setSize(String) - Method in interface nxopen.cam.HoleBossSet
-
License requirements: cam_base ("CAM BASE")
.
- setSize(CGMBuilder.SizeOption) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setSize(double, double) - Method in interface nxopen.diagramming.SheetBuilder
-
Sets the height and width of this sheet.
- setSize(double) - Method in interface nxopen.diagramming.tables.CellRangeBuilder
-
License requirements: None.
- setSize(double) - Method in interface nxopen.display.Stage
-
- setSize(String) - Method in interface nxopen.features.shipdesign.ShipProfileCutoutBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSize(SteelDistributionBuilder.SaSize) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSize(ImageCaptureBuilder.ImageSize) - Method in interface nxopen.gateway.ImageCaptureBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSize(PrintPDFBuilder.SizeOption) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setSize(SketchPolygonBuilder.SizeType) - Method in interface nxopen.SketchPolygonBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSizeEnum(int) - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSizeFactor(double) - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSizeFormat(HoleTableSettingsFormatBuilder.SizeFormatType) - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSizeLetterCode(SizeLetterCode) - Method in interface nxopen.annotations.LineWeldSideData
-
Sets the weld size letter code (ISO and DIN only)
License requirements: None.
- setSizeMethod(WeldMeasurementSizeMethod) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the measurement size method.
- setSizeOption(LocalRemeshBuilder.Option) - Method in interface nxopen.cae.LocalRemeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSizeOption(TurnToolBuilder.SizeOptions) - Method in interface nxopen.cam.TurnToolBuilder
-
License requirements: None.
- setSizeOption(ImageBaseBuilder.SizeOptions) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setSizeOption(HelixBuilder.SizeOptions) - Method in interface nxopen.features.HelixBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSizeOption(int) - Method in interface nxopen.features.LocalScaleCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSizeOption(int) - Method in interface nxopen.features.MoveCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSizeOption(HelixPattern.SizeOptions) - Method in interface nxopen.geometricutilities.HelixPattern
-
License requirements: None.
- setSizePoint(Point) - Method in interface nxopen.SketchPolygonBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSizePrecision(int) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: None.
- setSizeSpiralType(SpiralPattern.SpiralDefineSize) - Method in interface nxopen.geometricutilities.SpiralPattern
-
License requirements: None.
- setSizeString(WeldBeadSizeBuilder.Size) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSizeSubtype(MeshControlBuilder.SizeTypes) - Method in interface nxopen.cae.MeshControlBuilder
-
Sets the size type of mesh control
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSizingMethod(SizingMethod) - Method in interface nxopen.diagramming.tables.CellRangeBuilder
-
License requirements: None.
- setSizingMethod(PierceItemBuilder.SizingMethodOption) - Method in interface nxopen.die.PierceItemBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSizingOption(CfdAutoRefinementConstraintBuilder.Sizing) - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setSizingOption(CfdContactPreventionConstraintBuilder.Sizing) - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setSizingOption(CfdLocalResolutionConstraintBuilder.Sizing) - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setSizingOption(MeshControlBuilder.SizingType) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSketch(SketchCurves) - Method in interface nxopen.cae.GeneralGeometryBeamSectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSketch(Sketch) - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Set the sketch
License requirements: drafting ("DRAFTING")
.
- setSketch(Sketch) - Method in interface nxopen.features.SectionEditBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Sets the Slave Sketch used by the Bead, If one exists.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Sets the Sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Sets the sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Sets the internal sketch (used to specify rip curves), if it exists.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Sets the Slave Sketch used by the Dimple, If one exists.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Sets the Slave Sketch used by the Drawn Cutout, If one exists.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder
-
Sets the Slave Sketch used by the Edge Rip, If one exists.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.JogBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Sets the internal sketch used by the louver's section.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the internal sketch used by the normal cutout, if it exists.
- setSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Sets the sketch of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSketch(Sketch) - Method in interface nxopen.fields.FieldProfileTable
-
License requirements: None.
- setSketch(Sketch) - Method in interface nxopen.layout2d.InsertComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSketch(Sketch) - Method in interface nxopen.SketchExpressionModifierBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSketchActive(Sketch) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Sets the sketch to be active
License requirements: None.
- setSketchDefaultAction(SessionModeling.SketchDefaultActionType) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setSketchEditOption(SessionModeling.SketchEditType) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setSketches(SketchExpressionModifierBuilder.EndCuts) - Method in interface nxopen.SketchExpressionModifierBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSketchGroupRelationScope(int) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSketchGroupType(GroupBuilder.SketchType) - Method in interface nxopen.GroupBuilder
-
License requirements: None.
- setSketchInternal(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSketchInternal(boolean) - Method in interface nxopen.linedesigner.RailingFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSketchOnPath(boolean) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setSketchOnPath(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setSketchOrient(SketchAlongPathBuilder.SketchOrientationType) - Method in interface nxopen.SketchAlongPathBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSketchOrientation(Direction) - Method in interface nxopen.tooling.WireHoleBuilder
-
License requirements: None.
- setSketchOrigin(Point) - Method in interface nxopen.SketchInPlaceBuilder
-
License requirements: None.
- setSketchParentPlane(boolean) - Method in interface nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSketchSection(Section) - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
License requirements: nx_penetration_mgmt ("Penetration Management")
.
- setSketchWorkPlaneEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not objects on the work
plane are emphasized in the Sketch Task Environment.
- setSkipChecking(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setSkipCheckingDontLoadPart(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setSkipEmptyLayer(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setSkipLevel(Tag, int) - Method in interface nxopen.uf.UFPlist
-
- setSkipOverriddenResultOption(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setSkipStep(boolean) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSkipSteps(int) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSkipSteps(String) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setSlantAngle(double) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSlave(boolean) - Method in interface nxopen.routing.OffsetPath
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setSlaveAxisJoint(PhysicsJoint) - Method in interface nxopen.mechatronics.CouplingBuilder
-
Sets the slave axis.
- setSlaveAxisType(CamBuilder.AxisJointType) - Method in interface nxopen.mechatronics.CamBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSlaveAxisType(ThreeJointCouplerBuilder.AxisJointType) - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSlaveMultiple(double) - Method in interface nxopen.mechatronics.GearBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSlaveUnit(CamProfileBuilder.SlaveValueUnit) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSlaveUnit(GraphControlBuilder.SlaveValueUnit) - Method in interface nxopen.mechatronics.GraphControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSlaveUnit(MotionProfileBuilder.SlaveValueUnit) - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSliceFormat(TBSSmoothBuilder.SliceFormatOption) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSliceNormalVector(Direction) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSliceNumber(int) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSliding(boolean) - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSlipForces(TirePropertyTnoBuilder.SlipForcesType) - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSliverTol(double) - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setSlopeAtEndPoint(Direction) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setSlopeAtStartPoint(Direction) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setSlopeControl(SectionSurfaceBuilderEx.SlopeControlType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSlotAttributes(String, String, int) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the slot attributes, note existance of attributes depends on usage in
main feature.
- setSlotAttributes(String, String, int) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the slot attributes, note existance of attributes depends on usage in
main feature.
- setSlots(ExpressionBlockBuilder.Slot[]) - Method in interface nxopen.mechatronics.ExpressionBlockBuilder
-
Sets all Slots.
- setSlowdownDistanceOption(CornerControlBuilder.SlowdownDistanceOptions) - Method in interface nxopen.cam.CornerControlBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSlugEdgeForTypeTwo(Edge) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSlugHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the slug hole attributes, note existance of attributes depends on usage in
main feature
License requirements: ug_die_design ("Die Design")
.
- setSlugHoleAttributes(String, String, int, String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
Sets the slug hole attributes, note existance of attributes depends on usage in
main feature
License requirements: ug_die_design ("Die Design")
.
- setSlugHoleDiameterIncrement(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setSlugHoleDiameterIncrement(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setSlugHoleOffset(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setSlugHoleOffset(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setSlugHoleShape(DirectionOption, IProfile[]) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Sets the slug hole shape of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- setSlugPreviousParameterA(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSlugPreviousParameterC1(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSlugPreviousParameterC2(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSlugRetentionFeature(Feature) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSmallAreaStatus(SmallAreaAvoidance.StatusTypes) - Method in interface nxopen.cam.SmallAreaAvoidance
-
License requirements: cam_base ("CAM BASE")
.
- setSmallFeature(HiddenLineSmallFeatureOption) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the small feature option.
- setSmallFeature(HiddenLineSmallFeatureOption) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSmallFeature(HiddenLineSmallFeatureOption) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the small feature option.
- setSmallFeatures(CustomViewSettingsBuilder.Features) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSmallFeaturesTolerance(double) - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Sets the value of small features tolerance.
- setSmallFeaturesTolerance(double) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSmallFeaturesTolerance(double) - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Sets the value of small features tolerance.
- setSmartCollector(ScCollector) - Method in interface nxopen.features.ChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSmartlightweightViewsLoadComponentOnDemand(boolean) - Method in interface nxopen.preferences.SessionDrafting
-
Sets the load on demand flag
License requirements: None.
- setSmartLod(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setSmartUpdateOptionAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setSmartUpdateOptionAsString(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setSmartUpdateOptionAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setSmartUpdateOptionAsString(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setSmartUpdteOptionAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
- setSmashSymbol(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSmoothBSurf(boolean) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setSmoothBSurfaces(boolean) - Method in interface nxopen.Step203Importer
-
License requirements: None.
- setSmoothBSurfaces(boolean) - Method in interface nxopen.Step214Importer
-
License requirements: None.
- setSmoothBSurfaces(boolean) - Method in interface nxopen.Step242Importer
-
License requirements: None.
- setSmoothCornersAt(CornerControlBuilder.SmoothCornersAtOptions) - Method in interface nxopen.cam.CornerControlBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothCycles(int) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSmoothDisplayOption(boolean) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSmoothEdge(boolean) - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Sets the status of smooth edge.
- setSmoothEdge(boolean) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSmoothEdge(boolean) - Method in interface nxopen.facet.LocalOffsetBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setSmoothEdge(boolean) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Sets the status of smooth edge.
- setSmoothEdgeColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSmoothEdgeColor(int) - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Sets the color of smooth edge.
- setSmoothEdgeColor(int) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Sets the color of smooth edge.
- setSmoothEdgeEndGaps(boolean) - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Sets the status of smooth edge end gaps.
- setSmoothEdgeEndGaps(boolean) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Sets the status of smooth edge end gaps.
- setSmoothEdgeEndGapsData(double) - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Sets the value of smooth edge end gaps.
- setSmoothEdgeEndGapsData(double) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Sets the value of smooth edge end gaps.
- setSmoothEdgeFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSmoothEdgeFont(Font) - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Sets the font of smooth edge.
- setSmoothEdgeFont(Font) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Sets the font of smooth edge.
- setSmoothEdgeTolerance(boolean) - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Sets the status of smooth edge angle tolerance.
- setSmoothEdgeTolerance(boolean) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Sets the status of smooth edge angle tolerance.
- setSmoothEdgeToleranceData(double) - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Sets the value of smooth edge angle tolerance in degrees.
- setSmoothEdgeToleranceData(double) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Sets the value of smooth edge angle tolerance in degrees.
- setSmoothEdgeWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSmoothEdgeWidth(Width) - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Sets the width of smooth edge.
- setSmoothEdgeWidth(Width) - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Sets the width of smooth edge.
- setSmoothFactor(int) - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSmoothFactor(int) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSmoothFactor(int) - Method in interface nxopen.features.RefitFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSmoothing(boolean) - Method in interface nxopen.cam.GuidedCurveBuilder
-
License requirements: None.
- setSmoothing(WedmGeomBuilder.CornerSmoothingType) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothing(WedmOperationBuilder.CornerSmoothingType) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothing(TrimLineDevelopmentBuilder.SmoothingName) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSmoothingEnabled(boolean) - Method in interface nxopen.facet.FeatureExtractionBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSmoothingFactor(double) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setSmoothingFactor(double) - Method in interface nxopen.facet.CurvatureBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSmoothingFactor(double) - Method in interface nxopen.facet.FeatureExtractionBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSmoothingFactor(int) - Method in interface nxopen.features.PoleSmoothingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSmoothingFactor(int) - Method in interface nxopen.features.SmoothSplineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setSmoothingLevel(double) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setSmoothingMethod(int) - Method in interface nxopen.cam.InterpolateVector
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothingMethod(int) - Method in interface nxopen.cam.ToolAxisAdvanced
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothingOption(CornerControlBuilder.SmoothingOptions) - Method in interface nxopen.cam.CornerControlBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothingOption(NcmScBuilder.SmoothingOptions) - Method in interface nxopen.cam.NcmScBuilder
-
- setSmoothingOption(MeshTransformerBuilder.SmoothingType) - Method in interface nxopen.features.MeshTransformerBuilder
-
License requirements: None.
- setSmoothingTolerance(double) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothLeadinDistance(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothLeadinFlag(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothLeadInOption(WedmGeomBuilder.SmoothLeadInTypes) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothLeadInOption(WedmOperationBuilder.SmoothLeadInTypes) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothLeadoutDistance(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothLeadoutFlag(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothLeadOutOption(WedmGeomBuilder.SmoothLeadOutTypes) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothLeadOutOption(WedmOperationBuilder.SmoothLeadOutTypes) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSmoothLevel(double) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSmoothness(BridgeFacetBodyBuilder.SmoothTypes) - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
License requirements: None.
- setSmoothness(int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSmoothNormals(boolean) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSmoothRangeFrom(Point) - Method in interface nxopen.features.SmoothRangeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSmoothRangeTo(Point) - Method in interface nxopen.features.SmoothRangeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSmoothRatio(double) - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSmoothTolerance(double) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the tolerance used for cubic or quintic smoothing.
- setSmoothType(OutputCurvesBuilder.SmoothTypes) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the smooth type
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSmoothType(FillHoleBuilder.SmoothTypes) - Method in interface nxopen.facet.FillHoleBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSnapAngle(double) - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setSnapAngle(double) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setSnapAngle(double) - Method in interface nxopen.preferences.SessionSketch
-
Sets the snap angle.
- setSnapAngleLimit(double) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
License requirements: None.
- setSnapFloorToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setSnapLinks(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the option of snap links
License requirements: mechanisms ("MECHANISMS")
.
- setSnapPointsPerMinor(int) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setSnapPointToGrid(boolean) - Method in interface nxopen.weld.DatumSurfaceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setSnapPointTypesEnabled(int) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.AngularDimension
-
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.LinearDimension
-
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.OnPathDimension
-
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.RadiusDimension
-
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setSnapPointTypesOnByDefault(int) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setSnapRadius(double) - Method in interface nxopen.SketchDimensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setSnapRole(AlignBodyBuilder.RoleType) - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSnapShot(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
- setSnapshotDataToUse(TrackDrawingChangesGeneralBuilder.SnapshotDataToUseType) - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSnapshotName(String) - Method in interface nxopen.sim.SaveSnapshotBuilder
-
Sets the snapshot name
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setSnapshotView(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
- setSnapshotView(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
- setSnapshotView(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
- setSnapSize(BlankLayoutBuilder.SnapSizeOption) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setSnapToData(boolean) - Method in interface nxopen.cae.xyplot.MarkerStyleSetting
-
License requirements: None.
- setSnapToElbowAngles(boolean) - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setSnapToElbowAngles(boolean) - Method in interface nxopen.routing.ElbowSnapSettings
-
Sets whether or not to snap control points to the nearest valid elbow angle.
- setSnapToGrid(boolean) - Method in interface nxopen.display.GridBuilder
-
License requirements: None.
- setSnapToGrid(boolean) - Method in interface nxopen.preferences.WorkPlane
-
Sets the snap to grid flag.
- setSnapTolerance(double) - Method in interface nxopen.cae.ImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSnapToSourceBoundaries(boolean) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setSnipNearFacets(boolean) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSnippingPlane(Plane) - Method in interface nxopen.features.SnipSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSoftShadowsBiasOffset(double) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setSoftShadowsEdges(int) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setSoftShadowsEnabled(boolean) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setSoftShadowsGradientClamp(double) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setSoftShadowsQuality(int) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setSoftShadowsToggle(boolean) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setSoftwareProperties(boolean) - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSolidAreaColor(double[]) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Sets the solid area color
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSolidProperty(LaminatePly.SolidPropertyType) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSolids(boolean) - Method in interface nxopen.ObjectTypeSelector
-
License requirements: None.
- setSolidType(DatumCommonBuilder.SolidTypes) - Method in interface nxopen.weld.DatumCommonBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSolidType(WeldCustom) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the output solid type.
- setSolution(int) - Method in interface nxopen.AutomaticTraceline
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSolution(SimSolution) - Method in interface nxopen.cae.LaminateDynamicSimBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSolution(SimSolution) - Method in interface nxopen.cae.MechanicalLoadSumBuilder
-
The solution object
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSolution(SimSolution) - Method in interface nxopen.cae.PreTestSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setSolution(SimSolution) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSolution(MotionSolution) - Method in interface nxopen.motion.ResultMeasureBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSolutionHelpParams(double[]) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
For multiple solution case,set help point parameters to indicate which solution should be kept.
- setSolutionHelpPositions(Point3d[]) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
For multiple solution case, set help point positions to indicate which solution should be kept.
- setSolutionMergeOption(SolverAppendOption.SolutionOption) - Method in interface nxopen.cae.SolverAppendOption
-
- setSolutionName(String, boolean) - Method in interface nxopen.cae.CorrelSolution
-
Sets the correlation solution name
License requirements: nx_correl_base ("FE Correlation")
.
- setSolutionName(String) - Method in interface nxopen.cae.ImportedSolutionBuilder
-
The solution name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSolutionName(String, boolean) - Method in interface nxopen.cae.responsesimulation.Solution
-
Sets the response simulation solution name
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSolutionName(String) - Method in interface nxopen.cae.SimMotionLoadsListItemBuilder
-
License requirements: None.
- setSolutionObject(MotionSolution) - Method in interface nxopen.motion.GraphObjectBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSolutions(SimSolution[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set solutions to import
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSolutionType(Nester3D.Solution) - Method in interface nxopen.mfg.am.Nester3D
-
License requirements: am_pb_mtls_nest_3d_2 ("Advanced NX Powder Bed Additive 3D Nesting") OR am_pb_mtls_nest_3d_1 ("Basic NX Powder Bed Additive 3D Nesting")
.
- setSolutionType(MotionSolutionBuilder.SolutionTypes) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSolveoptions(DurabilitySolveOptions) - Method in interface nxopen.cae.DurabilityEventBuilder
-
The event overrides.
- setSolver(LaminateDrapingDataBuilder.SolverType) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSolver(MotionEnvironment.Solver) - Method in interface nxopen.motion.MotionEnvironment
-
Sets Motion solver
License requirements: mechanisms ("MECHANISMS")
.
- setSolverAndAnalysisType(String, String) - Method in interface nxopen.cae.BaseFemPart
-
- setSolverAndAnalysisTypeAndAbstraction(String, String, BaseFemPart.AxisymAbstractionType) - Method in interface nxopen.cae.BaseFemPart
-
Sets solver and analysis type and axisymmetric abstraction associated with the BaseFem part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSolverCardNameDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the solver card name of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSolverConvergencyLevel(OnestepUnformBuilder.Convergency) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setSolverConvergencyLevel(TrimLineDevelopmentBuilder.Convergency) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSolverDisplayMode(String) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSolverDisplaySpringbackMode(OnestepUnformBuilder.DisplaySpringbackMode) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setSolverDoSpringbackCalculation(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setSolverInput(LaminateGraphicalReportBuilder.SolverInputType) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSolverInput(LaminateSpreadsheetReportBuilder.SolverInputType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSolverJoinOutputCurves(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setSolverJoinOutputCurves(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSolverMaxIterationSteps(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setSolverMaxIterationSteps(int) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSolverName(String) - Method in interface nxopen.cae.SolverAppendOption
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSolverOptions(String, String, BaseFemPart.AxisymAbstractionType) - Method in interface nxopen.cae.FemCreationOptions
-
Set Solver, Analysis Type, and Axisymmetric Abstraction Type
License requirements: None.
- setSolverPlyStress(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
- setSolverResults(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSolverSaveAnalysisResultsIntoFeature(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setSolverSaveAnalysisResultsIntoFeature(boolean) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSolverShellResultant(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
- setSolverType(Solver) - Method in interface nxopen.cae.optimization.DAOSolution
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSolverType(Solver) - Method in interface nxopen.cae.optimization.DAOSolutionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSolvingTolerance(double) - Method in interface nxopen.preferences.SessionSketch
-
Sets the sketch solving tolerance.
- setSolvingTolerance(double) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the sketch solving tolerance.
- setSort2Access(boolean) - Method in interface nxopen.cae.DurabilityTransientEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSortColumn(BendTableSettingsBuilder.ColumnType) - Method in interface nxopen.annotations.BendTableSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSortConnectionsPlugin(CustomManager.SortConnectionsPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will call to sort the connections about to be routed.
- setSortedList(NXObject[]) - Method in interface nxopen.routing.StockBrowserBuilder
-
Set the filtered stock object list when filter type is changed.
- setSortedStockDevices(ElectricalStockDevice[]) - Method in interface nxopen.routing.electrical.SortConnectionsPluginData
-
Sets the stock devices sorted in the order in which you want their connections to route.
- setSortFunctionMode(OrderAspectsBuilder.SortType) - Method in interface nxopen.ame.OrderAspectsBuilder
-
Sets
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSortLocationMode(OrderAspectsBuilder.SortType) - Method in interface nxopen.ame.OrderAspectsBuilder
-
Sets
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSortOnUpdate(boolean) - Method in interface nxopen.annotations.BendTableSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSortOnUpdate(boolean) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setSortOrder(LaminateSpreadsheetReportBuilder.SortOrderType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSortProductMode(OrderAspectsBuilder.SortType) - Method in interface nxopen.ame.OrderAspectsBuilder
-
Sets
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSortRootNodes(boolean) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setSortType(LaminateSpreadsheetReportBuilder.SortingType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setSource(String) - Method in interface nxopen.ame.EditQueryBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSource(String, String) - Method in interface nxopen.cam.BlankIpw
-
Set the blank ipw source
License requirements: cam_base ("CAM BASE")
.
- setSource(NXObject[]) - Method in interface nxopen.mechatronics.ObjectSinkBuilder
-
Sets the source.
- setSource(String) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSourceData(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Sets the source data of the object.
- setSourceDirection(Direction) - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSourceDirection(Direction) - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSourceElementEdgePathMethod(ElemEdgePathMethod) - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
Set the source element path of the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSourceExpression(Expression) - Method in interface nxopen.ame.ReferenceObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSourceFile(String) - Method in interface nxopen.cae.DataSourceBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSourceGroup(CaeGroup) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSourceGroupFilterType(int) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSourceLabel(String) - Method in interface nxopen.cae.SimLoadRecipeSource
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSourceList(PackagingMeasureBuilder.GeometryData[]) - Method in interface nxopen.motion.PackagingMeasureBuilder
-
Sets the source geometry data.
- setSourceName(String) - Method in interface nxopen.cae.DataSourceBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSourceObject(NXObject) - Method in interface nxopen.ame.ExtractAttributeBaseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSourceObject(IPostScenarioDataSource) - Method in interface nxopen.cae.DataSourceBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSourceOption(FlexBodyBuilder.SourceType) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSourceOrigin(Point) - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSourceOrigin(Point) - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSourcePart(TaggedObject) - Method in interface nxopen.annotations.PmiWaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSourcePart(TaggedObject) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setSourcePart(Part) - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder
-
Sets the source part to create 2D component from.
- setSourcePartNameAttribute(String) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: None.
- setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: None.
- setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.MirrorBodyBuilder
-
License requirements: None.
- setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.WaveDatumBuilder
-
License requirements: None.
- setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
License requirements: None.
- setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.WavePointBuilder
-
License requirements: None.
- setSourcePartOccurrence(TaggedObject) - Method in interface nxopen.features.WaveSketchBuilder
-
License requirements: None.
- setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.CompositeCurveBuilder
-
Sets source part occurrences
License requirements: None.
- setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.ExtractFaceBuilder
-
Sets source part occurrences
License requirements: None.
- setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.MirrorBodyBuilder
-
Sets source part occurrences
License requirements: None.
- setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.WaveDatumBuilder
-
Sets source part occurrences
License requirements: None.
- setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.WavePointBuilder
-
Sets source part occurrences
License requirements: None.
- setSourcePartOccurrences(TaggedObject[]) - Method in interface nxopen.features.WaveSketchBuilder
-
Sets source part occurrences
License requirements: None.
- setSourcePoint(Point) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSourcePosition(Point) - Method in interface nxopen.display.LightBuilder
-
License requirements: None.
- setSourceScope(RelinkerBuilder.LinkScope) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setSourceSimPart(SimPart) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set source simulation part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSourceTargetSeparator(GeneralAnnotationSettingsBuilder.SourceAndTargetSeparator) - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSourceType(ObjectTransformerBuilder.TransformSourceType) - Method in interface nxopen.mechatronics.ObjectTransformerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSourceTypeSelection(ReferenceObjectBuilder.SourceSelectionType) - Method in interface nxopen.ame.ReferenceObjectBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSourceVDirection(Direction) - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSpaceBetweenFunctions(int) - Method in interface nxopen.cae.xyplot.DiagramDisplayStyles2DBarChart
-
License requirements: None.
- setSpaceBetweenItems(int) - Method in interface nxopen.cae.xyplot.DiagramDisplayStyles2DBarChart
-
License requirements: None.
- setSpaceBetweenTextAndBar(int) - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
License requirements: None.
- setSpaceFactor(double) - Method in interface nxopen.annotations.LineWeldBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSpaceFactor(double) - Method in interface nxopen.weld.WeldPmiBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setSpacerAngle(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSpaceReservationMethodType(PathStockPreferenceBuilder.SpaceReservationMethod) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Sets the method to determine which space reservation to assign.
- setSpaceReservationMode(RoutingStock.SpaceReservationModeFlag) - Method in interface nxopen.preferences.RoutingStock
-
Sets the space reservation creation mode
License requirements: routing_base ("Routing Basic")
.
- setSpaceReservationTranslucency(int) - Method in interface nxopen.preferences.RoutingStock
-
Sets the desired translucnecy of the newly created Space Reservation Stock
License requirements: routing_base ("Routing Basic")
.
- setSpacerOffset(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSpaceSize(double) - Method in interface nxopen.preferences.PartVisualizationLine
-
Sets the space size.
- setSpaceType(PatternSpacing.SpacingType) - Method in interface nxopen.geometricutilities.PatternSpacing
-
License requirements: None.
- setSpacing(int) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Sets the value of spacing
License requirements: None.
- setSpacing(RSEvent.SpacingType) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSpacing(double) - Method in interface nxopen.diagramming.tables.ContinuationDataBuilder
-
License requirements: None.
- setSpacing(double) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSpacing(EdgeCutBuilder.ArraySpacing) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacing(double) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacing(double) - Method in interface nxopen.mfg.am.Nester3D
-
License requirements: am_pb_mtls_nest_3d_2 ("Advanced NX Powder Bed Additive 3D Nesting") OR am_pb_mtls_nest_3d_1 ("Basic NX Powder Bed Additive 3D Nesting")
.
- setSpacing(boolean) - Method in interface nxopen.weld.GrooveBuilder
-
- setSpacingAlongCurveType(SectionCurveBuilder.SpacingType) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSpacingCalculateMethod(WeldSpacingCalcMethod) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the project method type.
- setSpacingDistance(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setSpacingEnabled(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacingEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpacingLength(double) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setSpacingMethod(EasyPatternBuilder.SpacingMethodTypes) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSpacingMethod(JointmarkGuideBuilder.SpaceMethod) - Method in interface nxopen.weld.JointmarkGuideBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSpacingNumber(String) - Method in interface nxopen.weld.WeldPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSpacingNumberOfElements(int) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSpacingOption(JointmarkGuideBuilder.SpaceOption) - Method in interface nxopen.weld.JointmarkGuideBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSpacingReference(Direction) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setSpareDialogForDragAndDrop(boolean) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSpatialMap(SpatialMap) - Method in interface nxopen.fields.Field
-
Set the spatial map for the formula field.
- setSpatialResolution(double) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSpCurveTolerance(double) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setSpecialBaseView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSpecialization(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setSpecialOutputMode(OrientGeomBuilder.SpecialOutputModes) - Method in interface nxopen.cam.OrientGeomBuilder
-
Sets the Special Output
License requirements: cam_base ("CAM BASE")
.
- setSpecificationChangedPlugin(CustomManager.SpecificationChangedPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will use to display a note on the segments selected in the Duct Size Calculator.
- setSpecificationOption(String) - Method in interface nxopen.routing.DefineRunBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setSpecificColor(boolean) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setSpecificInArrangement(Arrangement, boolean) - Method in interface nxopen.positioning.ComponentConstraint
-
- setSpecificPartialShade(boolean) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setSpecificTranslucency(boolean) - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
License requirements: None.
- setSpecifiedCoordinateSystem(CoordinateSystem) - Method in interface nxopen.PartImporter
-
Sets the specified coordinate system.
- setSpecifiedCoordinateSystem(CoordinateSystem, boolean) - Method in interface nxopen.PartImporter
-
Sets the specified coordinate system.
- setSpecifiedLayer(int) - Method in interface nxopen.tooling.AddReusableFeatureBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSpecifiedMCF(String) - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setSpecifiedNumberOfPoints(int) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSpecifiedRotationPoint(Point) - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setSpecifiedSbfFile(String) - Method in interface nxopen.uf.UFDrf
-
- setSpecifiedStock(CharacteristicList) - Method in interface nxopen.routing.PathStockBuilder
-
- setSpecifiedStock(CharacteristicList, CharacteristicList) - Method in interface nxopen.routing.PathStockBuilder
-
- setSpecifyBlend(boolean) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSpecifyClearanceDataFile(String) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSpecifyColor(ColorFeatureBuilder.OperationType) - Method in interface nxopen.features.ColorFeatureBuilder
-
License requirements: None.
- setSpecifyContinuation(DrawingRegionBuilder.RegionContinuation) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setSpecifyDieTip(Direction) - Method in interface nxopen.tooling.LayoutManagementBuilder
-
License requirements: None.
- setSpecifyDirection(Direction) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setSpecifyDistance(double) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSpecifyElementSize(boolean) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setSpecifyFace(ScCollector) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSpecifyFloorPlane(Plane) - Method in interface nxopen.display.Stage
-
License requirements: None.
- setSpecifyGroundPlane(Plane) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: None.
- setSpecifyPlane(Plane) - Method in interface nxopen.die.DiePlaneBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setSpecifyPlane(Plane) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setSpecifyPlane(Plane) - Method in interface nxopen.features.WrapBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSpecifyPoint(Point) - Method in interface nxopen.ame.MountingInterfaceBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSpecifyPoint(Point) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilder
-
License requirements: geometric_tol ("GDT")
.
- setSpecifyPoint(Point) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSpecifyPoint(Point) - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSpecifyPoint(Point) - Method in interface nxopen.FlatteningBuilder
-
- setSpecifyPoint(Point3d) - Method in interface nxopen.layout2d.InsertComponentBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSpecifyPointDistance(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSpecifyPrimaryDirection(Direction) - Method in interface nxopen.FlatteningBuilder
-
- setSpecifyVector(Direction) - Method in interface nxopen.drawings.HingeLineBuilder
-
License requirements: None.
- setSpecifyXPlane(Plane) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setSpecifyYPlane(Plane) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setSpectralLine(int) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSpectralLines(int) - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setSpectrum(int) - Method in interface nxopen.cae.LaminateFiberOrientationOptionsBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setSpectrumLevels(int) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setSpectrumScaling(FemSignalProcessingSignalAttributes.SpectrumScalings) - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes
-
License requirements: None.
- setSpectrumScaling(SimLoadRecipeFunctionAttributes.ScalingType) - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes
-
License requirements: None.
- setSpeed(int) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSpeed(double) - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
License requirements: None.
- setSpeed(int) - Method in interface nxopen.motion.PostProcess
-
Set the animation speed for motion animation
License requirements: mechanisms ("MECHANISMS")
.
- setSpeed(int) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Simulation Control Panel: Simulation Speed
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setSpeed(int) - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSpeed(UFVariant, double, UFSim.UnitType, double) - Method in interface nxopen.uf.UFSim
-
- setSpeedOption(TBSTopologyControllerOptimizationParameters.Speed) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSphere(NXObject) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSphereAxisMethod(InspectionUVGridBuilder.SphereAxisType) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSphereAxisVector(Direction) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSphereCenter(Point) - Method in interface nxopen.motion.BodyContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSphereColor(double[]) - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Sets the sphere color
License requirements: None.
- setSpherePoint(Point) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSphereSubdivisionLevelOption(SubdivisionPrimitiveShapeBuilderEx.SphereSubdivisionLevel) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setSpikeLength(double) - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
License requirements: None.
- setSpikeLength(double) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
License requirements: None.
- setSpikeLength(double) - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
License requirements: None.
- setSpill(boolean) - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSpin(boolean) - Method in interface nxopen.blockstyler.DoubleTable
-
License requirements: None.
- setSpin(boolean) - Method in interface nxopen.blockstyler.IntegerTable
-
License requirements: None.
- setSpindleEndPoint(Point) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSpindleFace(Face) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setSpindleFileLocation(TireEnvelopeBuilder.SpindleFileLocationOption) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSpindleFileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSpindleLinesLayer(int) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSpindleMode(CycleSpindle.Mode) - Method in interface nxopen.cam.CycleSpindle
-
License requirements: cam_base ("CAM BASE")
.
- setSpindleRpmToggle(int) - Method in interface nxopen.cam.FeedsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSpindleSliderName(String) - Method in interface nxopen.tooling.SpindleSliderBuilder
-
License requirements: nx_dievalidation ("DIE VALIDATION")
.
- setSpindleSliderVector(Direction) - Method in interface nxopen.tooling.SpindleSliderBuilder
-
License requirements: nx_dievalidation ("DIE VALIDATION")
.
- setSpindleSpeed(double) - Method in interface nxopen.cam.CycleSpindle
-
License requirements: cam_base ("CAM BASE")
.
- setSpindleStop(CenterlineDrillTurningBuilder.SpindleStopTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSpine(Section) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSpineEndFlowDirection(SectionSurfaceBuilderEx.SpineEndFlowType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSpineIntoBuilder(Section) - Method in interface nxopen.geometricutilities.LawBuilder
-
Sets the spine dynamically into builder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setSpineOption(AlongSpineBuilder.RetainSpineOption) - Method in interface nxopen.geometricutilities.AlongSpineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setSpineRadius(double) - Method in interface nxopen.die.AddSurfBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSpineRadius(double) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSpineStartFlowDirection(SectionSurfaceBuilderEx.SpineStartFlowType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSpineType(SectionSurfaceBuilderEx.Spine) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSpineVector(Direction) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSpiralNormal(Direction) - Method in interface nxopen.geometricutilities.SpiralPattern
-
License requirements: None.
- setSpiralOrientationOption(PatternOrientation.Enum) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSpiralStepoverDistance(double) - Method in interface nxopen.cam.DmSpiralBuilder
-
License requirements: None.
- setSpiralStepoverPercent(double) - Method in interface nxopen.cam.DmSpiralBuilder
-
License requirements: None.
- setSplineArcOutputType(ArcOutputTypeCiBuilder.SplineArcOutputTypes) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSplineBeam(SplineBeam) - Method in interface nxopen.motion.LoadTransferControl
-
Sets spline beam
License requirements: mechanisms ("MECHANISMS")
.
- setSplineCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSplineDefaultActionType(SessionModeling.SplineDefaultActionTypes) - Method in interface nxopen.preferences.SessionModeling
-
Sets the value indicating the default action for a spline.
- setSplineFitTolerance(double) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSplineFitToleranceType(ArcOutputTypeCiBuilder.SplineFitToleranceTypes) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSplineLineOutputType(ArcOutputTypeCiBuilder.SplineLineOutputTypes) - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSplineMethod(StudioSplineBuilder.Method) - Method in interface nxopen.features.StudioSplineBuilder
-
- setSplineMethod(Constraint.SplineType) - Method in interface nxopen.routing.SplinePathBuilder
-
- setSplineOptions(SplineOptions) - Method in interface nxopen.routing.HealPath
-
Set spline options.
- setSplinePointsBy(PointSetBuilder.SplinePointsType) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSplinePointsType(Constraint.SplineType) - Method in interface nxopen.positioning.Constraint
-
Sets the type of the spline.
- setSplineSap(Tag, int[], double) - Method in interface nxopen.uf.UFCurve
-
- setSplineSettings(boolean, boolean) - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
Sets options for subdividing splines.
- setSplineSettings(boolean, boolean, boolean) - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
Sets options for subdividing splines.
- setSplineType(RoadBuilder.SplineDatatypeChoices) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSplineType(SegmentBuilder.SplineDatatypeChoices) - Method in interface nxopen.motion.SegmentBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSplitAlongGuide(boolean) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setSplitAngle(double) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setSplitCurveOption(boolean) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSplitDirection(Division.SplitDirectionType) - Method in interface nxopen.routing.Division
-
License requirements: routing_hvac ("Routing HVAC")
.
- setSplitDirection(DivisionsBuilder.SplitDirectionType) - Method in interface nxopen.routing.DivisionsBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setSplitDirectionOption(SplitProfilePlateBuilder.SplitDirectionOptionType) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setSplitDirectionOption(SplitProfilePlateBuilder.SplitDirectionOptionType) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setSplitEdgeUpdateFlag(boolean) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Sets the flag to indicate that split knuckle edges are out of date and need to update.
- setSplitFeatureGroup(Feature) - Method in interface nxopen.features.shipdesign.RemoveSplitBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setSplitGap(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setSplitLength(double) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setSplitLineType(AttachElementsBuilder.SplitLineOption) - Method in interface nxopen.cae.AttachElementsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSplitMass(boolean) - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSplitMethod(ElementSplitBuilder.SplitMethodType) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSplitMethod(OneDimensionalElementSplitBuilder.SplitMethodType) - Method in interface nxopen.cae.OneDimensionalElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSplitOption(WeldJointBuilder.SplitTypes) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setSplitOutputAlongBoundaryCurves(boolean) - Method in interface nxopen.features.StudioSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setSplitPlane(Plane) - Method in interface nxopen.tooling.SplitSolidBuilder
-
License requirements: None.
- setSplitReinforcement(boolean) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSplitSubSingle(DieBaseBuilder.SplitMethod) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setSplitSurfaces(boolean) - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setSplitterAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced
-
License requirements: cam_base ("CAM BASE")
.
- setSplitterColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setSplittingDirection(boolean) - Method in interface nxopen.tooling.SplitInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSplitType(ToolPathSplitBuilder.SplitTypes) - Method in interface nxopen.cam.ToolPathSplitBuilder
-
License requirements: None.
- setSplitType(ToolPathSplitParametersBuilder.SplitTypes) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
License requirements: None.
- setSpreadsheetData(SpreadsheetData) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
It sets the KRUSpreadsheetData object to the builder.
- setSpreadsheetData(double[], double[], boolean[]) - Method in interface nxopen.geometricutilities.PatternDefinition
-
Sets the spreadsheet data
License requirements: None.
- setSpreadsheetData(SpreadsheetData) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the spreadsheet data, this is mainly used to set the attributes of a reusable component
License requirements: None.
- setSpreadsheetData(SpreadsheetData) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Sets the spreadsheet data
License requirements: None.
- setSpreadSheetFile(String) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSpreadSheetFileName(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setSpreadsheetItemID(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setSpreadsheetItemName(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setSpreadsheetItemRevision(String) - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setSpreadSheetPath(String) - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSpring(boolean) - Method in interface nxopen.cae.BoltBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSpring(Tag, UFMotion.SpringDamper) - Method in interface nxopen.uf.UFMotion
-
- setSpringAppDirection(ConnectorBuilder.ApplicationDirection) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSpringbackAngle(String) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the springback angle of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSpringbackMethod(DieEngStampingOutputBuilder.SpringbackMethodType) - Method in interface nxopen.tooling.DieEngStampingOutputBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSpringbackType(FlangeTaskBuilder.SpringbackTypes) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the springback type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSpringCustomizedSolver(boolean) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSpringData(FEElement, PhysicalPropertyTable, double, CaeElementAssociatedDataUtilsComponentEnd, CaeElementAssociatedDataUtilsComponentEnd) - Method in interface nxopen.cae.ElementAssociatedDataUtils
-
Sets spring element associated data.
- setSpringForceMultiplier(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setSpringPasses(int) - Method in interface nxopen.cam.ThreadMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSprungPoints(Point3d[]) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Set the sample points on the sprung surface.
- setSprungPointsFile(String) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setSR1Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR1LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR1Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR1RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR2ALeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR2ALeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR2ARight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR2ARightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR2BLeft(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR2BLeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR2BRight(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR2BRightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR2Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
- setSR2LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
- setSR2Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
- setSR2RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
- setSR3Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR3Left(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR3LeftFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR3Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR3Right(Point) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSR3RightFlag(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSrfanlParams(UFDisp.SrfanlData) - Method in interface nxopen.uf.UFDisp
-
- setSsaoBlurRadius(double) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setSsaoContrast(Shadows.SsaoContrastType) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setSsaoQuality(Shadows.SsaoQualityType) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setSsaoRadius(double) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setStackAboveSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the stack above spacing factor for space buffer above annotation in stack.
- setStackAboveSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStackAutospace(boolean) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the flag indicating whether to automatically set the stack spacing to system derived values
License requirements: None.
- setStackAutospace(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStackBelowSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the stack below spacing factor for space buffer below annotation in stack.
- setStackBelowSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStackHorizontalAlignment(StackHorizontalAlignment) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the stack horizontal(left/right) alignment option
License requirements: None.
- setStackHorizontalAlignment(StackHorizontalAlignment) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStackingRecipe(LaminateGlobalLayup.StackingRecipeType) - Method in interface nxopen.cae.LaminateGlobalLayup
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setStackInheritAssociatedObjects(boolean) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the flag indicating whether to inherit the associated objects of a stack when
an annotation is inserted into a stack.
- setStackInheritAssociatedObjects(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStackLeftSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the stack left spacing factor for space buffer left annotation in stack.
- setStackLeftSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStackRightSpaceFactor(double) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the stack right spacing factor for space buffer right annotation in stack.
- setStackRightSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStackVerticalAlignment(StackVerticalAlignment) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the stack vertical(above/below) alignment option
License requirements: None.
- setStackVerticalAlignment(StackVerticalAlignment) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStaggeredWeld(LineWeldBuilder.StaggeredWeldType) - Method in interface nxopen.annotations.LineWeldBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setStaggeredWeldSymbolDisplay(boolean) - Method in interface nxopen.annotations.LineWeldData
-
Sets the flag indicating whether the staggered weld symbol is displayed
License requirements: None.
- setStaggerShiftAlongMethod(SeamBuilder.StaggerShiftAlongMethods) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setStaggerType(CircularPattern.StaggerOptions) - Method in interface nxopen.geometricutilities.CircularPattern
-
License requirements: None.
- setStaggerType(RectangularPattern.StaggerOptions) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setStampingOutput(Feature) - Method in interface nxopen.die.FaceSheetBuilder
-
Sets the stamping output feature of the Face Sheet
License requirements: die_engineering ("DIE ENGINEERING")
.
- setStandaloneFilterFormatFile(boolean) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the option to export the XML routelist data with the formats and
filters information separately.
- setStandAloneInsertSheet(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setStandAloneProjectedView(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setStandAloneProjectToView(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setStandAloneViewCreation(boolean) - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setStandard(SurfaceFinishBuilder.StandardType) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setStandard(String) - Method in interface nxopen.cam.ThreadedHoleSet
-
The Standard
License requirements: cam_base ("CAM BASE")
.
- setStandard(SectionLineStyleBuilder.StandardStyle) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setStandard(String) - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(ManikinBuilder.StandardType) - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(PedestrianProtectionBuilder.StandardType) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(SeatBeltAnchorageBuilder.StandardTypes) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(String) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStandard(NXObject, String) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Sets standard for hole series.
- setStandardData(int) - Method in interface nxopen.drawings.ViewStyleThreadsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setStandardData(String) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setStandardDeviation(double) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setStandardDeviation(double) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setStandardEnglishScale(DrawingSheetBuilder.SheetStandardEnglishScale) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setStandardFontCharacterSpaceFactor(CharacterSpaceFactor) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the standard font text space factor for each text type (dimension,general,appended,tolerance) for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStandardFontStyle(String) - Method in interface nxopen.blockstyler.TextColorFontWidth
-
License requirements: None.
- setStandardMetricScale(DrawingSheetBuilder.SheetStandardMetricScale) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setStandardName(String) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setStandardName(String) - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setStandardOrUserDefined(DieBaseBuilder.SplitOption) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStandardOrUserDefined(SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStandardPart(String) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setStandardPartClassificationName(String) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: None.
- setStandardPartEditType(StandardPartBuilder.EditType) - Method in interface nxopen.tooling.StandardPartBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR ug_die_design ("Die Design")
.
- setStandardPartGroupOption(boolean) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setStandardPartVersion(double) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Set the standard part version.
- setStandardPunchTag(TaggedObject) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: None.
- setStandardRunout(AeroJoggleBuilder.SideType, boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the Global flag for runout
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setStandardSymbolTextFont(String) - Method in interface nxopen.annotations.AnnotationManager
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStandoffDistance(double) - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStarSource(boolean) - Method in interface nxopen.ame.InterruptionPointBuilder
-
Set the interruption point type to star source
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStart(int) - Method in interface nxopen.ame.PageNamingBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStart(double) - Method in interface nxopen.cam.PitchSetting
-
License requirements: cam_base ("CAM BASE")
.
- setStart(Port) - Method in interface nxopen.diagramming.ConnectionBuilder
-
License requirements: None.
- setStart(IOrientation) - Method in interface nxopen.die.RibChildBuilder
-
Sets the start limit geometry of the die rib.
- setStart(double) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setStart(Equipment, String, String) - Method in interface nxopen.pid.PipeBuilder
-
Sets the start port of this connection.
- setStartAddress(int) - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
License requirements: None.
- setStartAlignFillerSurfaceOption(AlignmentMethodBuilder.AlignFillerSurfaceType) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Sets the start align filler surface option
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setStartAndDirection(ICurve, Point3d, Vector3d) - Method in interface nxopen.Section
-
Sets the start element and the direction of the section.
- setStartAndDirectionToSection(Tag, double[], double[], Tag) - Method in interface nxopen.uf.UFModl
-
- setStartAndEndParametersEqual(boolean) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setStartAngle(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartAngle(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartAngle(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartAtArcCenter(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartBlendScaleFactor(double) - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RibChildBuilder
-
Sets the start limit geometry of the die rib using a profile.
- setStartCapLimitPlaneOption(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartCapSize(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setStartCapType(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setStartChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.MiddleHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.StartHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartCheckConstantStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartCheckFaceStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartCheckRadialStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartClosestToPreviousRetract(boolean) - Method in interface nxopen.cam.BladeRough
-
License requirements: cam_base ("CAM BASE")
.
- setStartContinuity(Continuity.ContinuityTypes) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setStartContinuityOption(BridgeCurveBuilder.ConstraintTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setStartCurveDirectionOption(BridgeCurveBuilder.CurveDirectionTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setStartCurveOfClosedLoop(int, Point3d) - Method in interface nxopen.Section
-
Set the curve on which the specified point lies as the start curve
of a specified single loop of the section.
- setStartCut(double) - Method in interface nxopen.cam.DmTrimExtend
-
License requirements: cam_base ("CAM BASE")
.
- setStartDeleteVolume(double) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setStartDeltaAngle(double) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartDeltaDistance(double) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartDeltaVector(NXObject) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartDeltaX(double) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartDeltaY(double) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartDirection(Direction) - Method in interface nxopen.AutomaticTraceline
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setStartDirection(boolean) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setStartDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setStartDistance(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartDistance(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartDistance(double) - Method in interface nxopen.cam.InspectionScanArcBuilder
-
License requirements: None.
- setStartDistance(double) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: None.
- setStartDistance(double) - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
License requirements: None.
- setStartDistance(double) - Method in interface nxopen.cam.InspectionScanLineBuilder
-
License requirements: None.
- setStartDistance(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartDistance(String) - Method in interface nxopen.geometricutilities.CurveLengthData
-
Set start distance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartDistance(String) - Method in interface nxopen.weld.WeldPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setStartDistanceLocation(WeldParasetLocation) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the start dist location
License requirements: ugweld ("UG WELD")
.
- setStartEdgeConstraint(MatchEdgeBuilder.EdgeConstraintType) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setStartEdgeLocked(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setStartEndMode(InspectionCurveFeatureBuilder.StartEndModeType) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanArcBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionScanLineBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartExtension(InheritableToolDepBuilder) - Method in interface nxopen.cam.FollowGeometryMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartExtension(double) - Method in interface nxopen.routing.HealPath
-
Set start extension.
- setStartExtensionEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartExtensionOption(CurveExtensionBuilder.ExtensionOption) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setStartExtensionOption(SplineExtensionBuilder.ExtensionOption) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setStartFlowDirection(SectionSurfaceBuilder.FlowDirectionEnum) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setStartFrame(NXObject) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setStartFrameName(String) - Method in interface nxopen.features.shipdesign.InsertFramesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setStartFrameName(String) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setStartFromCenter(boolean) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setStartFromCenter(boolean) - Method in interface nxopen.cam.NcmHoleMachiningEngRet
-
License requirements: cam_base ("CAM BASE")
.
- setStartFromSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartHandlesLinked(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartIndexInFunction(int) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStartIndexInLocation(int) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStartIndexInProduct(int) - Method in interface nxopen.ame.NamingRuleBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStartingUValue(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setStartingVValue(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setStartIteration(BaseIteration) - Method in interface nxopen.cae.Post3DGraphBuilder
-
Set start iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setStartIteration(BaseIteration) - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
-
Set start iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setStartIterIndex(int) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setStartIterValue(double) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setStartLabel(int) - Method in interface nxopen.cae.MultipleElementCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStartLabel(int) - Method in interface nxopen.cae.MultipleNodeCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStartLimitFaceNormalFlag(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartLimitFacesetCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartLimitHelperPoint(double[]) - Method in interface nxopen.features.RevolveBuilder
-
If until selected option is used for start limit and the selected entity intersects the revolve
multiple times, this point (in parasolid units) will help the system determine which intersection to select.
- setStartLimitPoint(Point) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartLocation(Point2d) - Method in interface nxopen.pid.PipeBuilder
-
Set the start location of this connection.
- setStartLocked(boolean) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setStartNumAxisSystems(int) - Method in interface nxopen.cae.connections.ComposerData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStartNumNodeAndElement(int) - Method in interface nxopen.cae.connections.ComposerData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStartNumProperties(int) - Method in interface nxopen.cae.connections.ComposerData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStartObject(NXObject) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- setStartObject(NXObject) - Method in interface nxopen.routing.PathStockBuilder
-
- setStartObjectType(BridgeCurveBuilderEx.StartObjectTypes) - Method in interface nxopen.features.BridgeCurveBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setStartOfEngageMotionType(TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes) - Method in interface nxopen.cam.TurnAvoidanceStartOfEngageBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartOffset(double) - Method in interface nxopen.AutomaticTraceline
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setStartOffset(double) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartOffset(String) - Method in interface nxopen.geometricutilities.FeatureOffset
-
- setStartOffsetLock(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setStartOrientation(ISurface[]) - Method in interface nxopen.die.RotorBuilder
-
Sets the start orientation of the rotor casting.
- setStartOrientation(ISurface) - Method in interface nxopen.die.SteelInsertBuilder
-
Sets the start orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.
- setStartParms(double) - Method in interface nxopen.routing.HealPath
-
Set start parameters.
- setStartPercent(double) - Method in interface nxopen.cam.BladeCutLevels
-
License requirements: cam_base ("CAM BASE")
.
- setStartPercentage(double) - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPercentage(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPercentage(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartPlane(ISurface) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the start plane of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setStartPlane(Plane) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the start plane
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setStartPlane(Plane) - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setStartPlane(Plane) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setStartPlane(Plane) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setStartPlane(Plane) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setStartPlaneSelected(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setStartPoint(Point) - Method in interface nxopen.annotations.RegionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setStartPoint(Point) - Method in interface nxopen.AutomaticTraceline
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setStartPoint(Point) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setStartPoint(double) - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setStartPoint(Point) - Method in interface nxopen.cam.FollowGeometryMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartPoint(Point) - Method in interface nxopen.cam.SplitSubopCommand
-
License requirements: None.
- setStartPoint(Point) - Method in interface nxopen.cam.TabPointDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartPoint(Point) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartPoint(Point) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartPoint(Point) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setStartPoint(Point) - Method in interface nxopen.features.GeodesicLineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartPoint(Point) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Sets the start point.
- setStartPoint(Point) - Method in interface nxopen.features.SpineCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartPoint(Point) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setStartPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPoint(Point) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPoint(Point) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPoint(Point3d) - Method in interface nxopen.Line
-
Sets the start point of the line
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setStartPoint(Point3d) - Method in interface nxopen.routing.HealPath
-
Set the start point.
- setStartPoint(Point) - Method in interface nxopen.SketchConicBuilder
-
License requirements: None.
- setStartPoint(Point) - Method in interface nxopen.tooling.CoolingConnectBuilder
-
License requirements: None.
- setStartPoint(Point) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
License requirements: None.
- setStartPointDirection(Direction) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setStartPointMode(InspectionUVGridBuilder.StartPointType) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPointMode(TurnAvoidanceStartBuilder.StartPointModes) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartPointMotionType(TurnAvoidanceStartBuilder.StartPointMotionTypes) - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartPointOptions(AssociativeArcBuilder.StartOption) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPointOptions(AssociativeLineBuilder.StartOption) - Method in interface nxopen.features.AssociativeLineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPointPoint(Point) - Method in interface nxopen.linedesigner.CreateFenceBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStartPointReference(AssociativeArcBuilder.StartReference) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPointReference(AssociativeLineBuilder.StartReference) - Method in interface nxopen.features.AssociativeLineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setStartPoints(Point[]) - Method in interface nxopen.cam.EditSubopCommand
-
Set the start point value
License requirements: None.
- setStartPointsUseEffectDist(boolean) - Method in interface nxopen.cam.NcmSubopBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartPoleFixed(boolean) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setStartPosition(VelocityImpactParameters.StartPositionType) - Method in interface nxopen.cae.responsesimulation.VelocityImpactParameters
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setStartPosition(CenterlineDrillTurningBuilder.StartPositionTypes) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartPositionMethod(TeachmodeProfileMoveBuilder.StartStopPositionMethods) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartPositionPoint(Point) - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartProfileOriginCurveDirection(boolean) - Method in interface nxopen.routing.StockTransitionBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setStartReferencePoint(Point) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setStartRegionPoint(Point) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setStartRevolveAngle(double) - Method in interface nxopen.cae.AxiSymmetricParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setStartSection(Section) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Sets the start section of the lofted flange.
- setStartSection(boolean) - Method in interface nxopen.geometricutilities.SecondarySectionData
-
License requirements: None.
- setStartSectionFile(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setStartSectionPoint(Point3d) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Sets the start/end point of the start section.It can be start/end point of the section profile.
- setStartSketch(SketchFeature) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Sets the start section sketch as slave.
- setStartStation(int) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setStartStation(int) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStartStep(double) - Method in interface nxopen.cam.DmTrimExtend
-
License requirements: cam_base ("CAM BASE")
.
- setStartStopBeforeBoundaryOffset(boolean) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartSurfaceDirectionOption(BridgeCurveBuilder.SurfaceDirectionTypes) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setStartTangentDirection(TransitionCurveBuilder.TangentDirections) - Method in interface nxopen.geometricutilities.TransitionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStartTeeLocation(Pipe, String, int, double) - Method in interface nxopen.pid.PipeBuilder
-
Set the connection location for tee object at the start of the connection.
- setStartTime(double) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setStartToolAxis(Direction) - Method in interface nxopen.cam.FollowGeometryMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStartTreatmentType(PillarBuilder.EndTreatmentTypes) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setStartType(MiterOptions.TypeOptions) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Sets the miter start type.
- setStartType1(BendTaperBuilder.StartType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setStartType2(BendTaperBuilder.StartType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setStartUDistance(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartUMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartUPercent(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartValue(double) - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setStartValue(String) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
- setStartValue(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
- setStartValueForLowerCase(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setStartValueForNumbers(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setStartValueForUpperCase(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setStartVDistance(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartVector(Vector3d) - Method in interface nxopen.routing.HealPath
-
Set the start vector.
- setStartVector(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setStartVectorI(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartVectorJ(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartVectorK(double) - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartVMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartVPercent(double) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStartWithLower(boolean) - Method in interface nxopen.cae.DurSpecialistBlockLoadEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setState(DesignElementBuilder.StateType) - Method in interface nxopen.assemblies.DesignElementBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setState(int) - Method in interface nxopen.blockstyler.Node
-
Sets the node state which is associated with node state icon.
- setState(boolean) - Method in interface nxopen.drawings.ViewStyleFPCalloutsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setState(boolean) - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setState(State) - Method in interface nxopen.layer.Category
-
Changes the state of every layer in the category to the
specified state, except the work layer
License requirements: None.
- setState(int, State) - Method in interface nxopen.layer.LayerManager
-
Sets the state of the specified layer.
- setState(int, State, boolean) - Method in interface nxopen.layer.LayerManager
-
Sets the state of the specified layer.
- setState(int, State) - Method in interface nxopen.layer.StateCollection
-
Sets the state of the specified layer
License requirements: None.
- setState(int) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setState(int) - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStateIconNameHandler(Tree.StateIconNameCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the state icon name callback.
- setStateOfCategory(Category, State) - Method in interface nxopen.layer.StateCollection
-
Sets the state of every layer in the category to the
specified state, except the work layer
License requirements: None.
- setStates(StateCollection, boolean) - Method in interface nxopen.layer.LayerManager
-
Sets the states for all layers in the part.
- setStates(StateCollection) - Method in interface nxopen.layer.LayerManager
-
Sets the states for all layers in the part.
- setStaticAnalysis(boolean) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticAntialiasing(RayTracedStudioEditorBuilder.StaticAntialiasingType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setStaticEqu(boolean) - Method in interface nxopen.motion.JointFrictionAdams
-
Sets the static equ
License requirements: mechanisms ("MECHANISMS")
.
- setStaticEqu(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the static equ
License requirements: mechanisms ("MECHANISMS")
.
- setStaticFinalGatherQuality(double) - Method in interface nxopen.display.GlobalIlluminationBuilder
-
License requirements: None.
- setStaticFriction(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyFtBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticHold(boolean) - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticIntegratorType(RecurdynSolverProperty.StaticIntegratorTypes) - Method in interface nxopen.motion.RecurdynSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticJacobianType(int) - Method in interface nxopen.motion.LmsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticLoad(int[], double[]) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Set the static loads and their scale factors
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStaticLoadUpdate(DurSpecialistEvent.UpdateCriterionType) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStaticMaxIteration(int) - Method in interface nxopen.motion.RecurdynSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticOffset(NXObject) - Method in interface nxopen.cae.DurabilityTransientEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStaticQuasiIteration(int) - Method in interface nxopen.motion.LmsSolverProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setStaticRadius(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStaticRadius(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStaticRayTracedStudioQuality(RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setStaticRayTracedStudioRenderDepth(int) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setStationaryAntialiasing(RayTracedStudioEditorBuilder.StationaryAntialiasingType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setStationaryEntity(NXObject) - Method in interface nxopen.features.DraftBuilder
-
- setStationaryEntity(NXObject) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setStationaryFace(Face) - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setStationaryFinalGatherQuality(double) - Method in interface nxopen.display.GlobalIlluminationBuilder
-
License requirements: None.
- setStationaryQuality(RayTracedStudioBuilder.StationaryDisplayQualityType) - Method in interface nxopen.display.RayTracedStudioBuilder
-
License requirements: None.
- setStationaryRadius(AeroJoggleBuilder.SideType, String) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
Set the stationary radius expression.
- setStationaryRadius(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
THE stationary radius
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setStationaryRayTracedStudioQuality(RayTracedStudioEditorBuilder.StationaryRayTracedStudioQualityType) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setStationaryRayTracedStudioshowStatusIndicator(boolean) - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
License requirements: None.
- setStationDistance(double) - Method in interface nxopen.tooling.LayoutManagementBuilder
-
License requirements: None.
- setStationEnum(LayoutManagementBuilder.StationItems) - Method in interface nxopen.tooling.LayoutManagementBuilder
-
License requirements: None.
- setStationInformation(String) - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStationLocation(Point) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStationName(String) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStationNameStr(String) - Method in interface nxopen.tooling.LayoutManagementBuilder
-
License requirements: None.
- setStationNumber(int) - Method in interface nxopen.tooling.LayoutManagementBuilder
-
License requirements: None.
- setStationNumber(StripLayoutStationInformationBuilder.StationItem) - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStationsNo(int) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setStationType(ConveyorStationFeatureBuilder.Type) - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStatisticalTolerance(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setStatisticalType(SearchCriteriaFeatureControlFrameBuilder.StatisticalOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setStatureData(HumanData.StatureType, double, HumanData.StatureUnitType) - Method in interface nxopen.features.HumanBuilder
-
Sets human stature data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setStatus(MarginCalculationBuilder.CalculationStatus) - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStatus(BoundaryTurnMemberFineFinishOffset.StatusValue) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset
-
License requirements: cam_base ("CAM BASE")
.
- setStatus(boolean) - Method in interface nxopen.cam.DimensionRule
-
License requirements: cam_base ("CAM BASE")
.
- setStatus(boolean) - Method in interface nxopen.cam.ExtendAtEdges
-
License requirements: cam_base ("CAM BASE")
.
- setStatus(boolean) - Method in interface nxopen.cam.InPathEventDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStatus(MinCutDepth.Types) - Method in interface nxopen.cam.MinCutDepth
-
License requirements: cam_base ("CAM BASE")
.
- setStatus(MinCutLength.Types) - Method in interface nxopen.cam.MinCutLength
-
License requirements: cam_base ("CAM BASE")
.
- setStatus(String) - Method in interface nxopen.issue.IssueContent
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setStatus(String) - Method in interface nxopen.issue.IssueContentBuilder
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setStatus(int, int) - Method in interface nxopen.uf.UFLayer
-
- setStatus(Tag, int) - Method in interface nxopen.uf.UFPart
-
- setStatus(String) - Method in interface nxopen.uf.UFUi
-
- setStatus(Validation.Result) - Method in interface nxopen.validate.ResultObject
-
License requirements: None.
- setStatusControl(WedmStatusControlCiBuilder.StatusTypes) - Method in interface nxopen.cam.WedmStatusControlCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStatusOfPlatformCeilingHeightUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStatusOfPlatformElevationUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStatusOfPlatformHeightUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStatusOfPlatformSupportDefaultFromCeilingToggleUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStatusOfPlatformSupportOptionUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStatusOfPlatformThicknessUpdation(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStatusSendNcCommandMsg(UFVariant, boolean) - Method in interface nxopen.uf.UFSim
-
- setStatusToRegenerate() - Method in interface nxopen.cam.UserDefinedOpr
-
Set operation status to regenerate
License requirements: None.
- setSteelFeatureApproach(ShipCollection.SteelFeatureApproach) - Method in interface nxopen.features.ShipCollection
-
Enable sketch sharing
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSteelFeatureType(String) - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSteepAreas(boolean) - Method in interface nxopen.cam.CleanupSettings
-
License requirements: cam_base ("CAM BASE")
.
- setSteepBody(Body) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setSteepCutDirection(FlowCutSteepContainment.SteepCutDirectionTypes) - Method in interface nxopen.cam.FlowCutSteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setSteepestDescDVarStep(double) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setSteepestDescMaxInnerIter(int) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setSteepestDescMethod(ModelUpdateOptimOptionsBuilder.SteepestDescMethodChoice) - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setSteepOverlapOption(boolean) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSteepOverlapType(DmAmBuilder.SteepOverlapOptTypes) - Method in interface nxopen.cam.DmAmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSteeringWheelCenterPoint(Point) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSteeringWheelCenterPointActive(boolean) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStemTop(NXObject) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStemTop(NXObject) - Method in interface nxopen.cam.ProbeTrackingBuilder
-
License requirements: None.
- setStencilPreview(boolean) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setStep(double) - Method in interface nxopen.die.ThroatChildBuilder
-
Sets the step to be applied at the end of the tangent extension of the flange
License requirements: ug_die_design ("Die Design")
.
- setStep(double) - Method in interface nxopen.die.ThroatParentBuilder
-
Sets the step to be applied at the end of the tangential extension of the flange
License requirements: ug_die_design ("Die Design")
.
- setStep(int) - Method in interface nxopen.motion.MotionSolutionBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStepAngle(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStepBannerBitmaps(String[]) - Method in interface nxopen.blockstyler.Wizard
-
Sets the StepBannerBitmaps.
- setStepBitmaps(String[]) - Method in interface nxopen.blockstyler.Wizard
-
Sets the StepBitmaps.
- setStepClearance(double) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setStepClearanceStatus(boolean) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setStepCount(MeshTransformerBuilder.StepCountValue) - Method in interface nxopen.features.MeshTransformerBuilder
-
License requirements: None.
- setStepCues(String[]) - Method in interface nxopen.blockstyler.Wizard
-
Sets the StepCues.
- setStepDistance(String) - Method in interface nxopen.die.ThroatChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setStepDistance(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStepFaceMethod1(StepBuilder.StepFaceMethods) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setStepFaceMethod2(StepBuilder.StepFaceMethods) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setStepIncrement(Tag, int) - Method in interface nxopen.uf.UFAssem
-
- setStepLocation(StepBuilder.StepLocations) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setStepMethod(DPMItpBuilder.StepMethodOption) - Method in interface nxopen.cam.DPMItpBuilder
-
- setStepMethod(MultiDepthCut.Types) - Method in interface nxopen.cam.MultiDepthCut
-
License requirements: cam_base ("CAM BASE")
.
- setStepMethod1(ShelfBuilder.StepMethod) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setStepMethod2(ShelfBuilder.StepMethod) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setStepNewType(StepBuilder.StepNewTypes) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setStepNotifyPostHandler(Wizard.StepNotifyPostCallback) - Method in interface nxopen.blockstyler.Wizard
-
Sets the StepNotifyPost handler.
- setStepNotifyPreHandler(Wizard.StepNotifyPreCallback) - Method in interface nxopen.blockstyler.Wizard
-
Sets the StepNotifyPre handler.
- setStepOption(boolean) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStepOption(StepOptionBehavior.StepOptionType) - Method in interface nxopen.geometricutilities.StepOptionBehavior
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setStepover(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setStepoverDis(double) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStepoverDisplayAsNCM(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setStepoverNum(int) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStepoverScallopHeight(double) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStepoverType(DPMItpBuilder.StepoverTypeOption) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStepoverType(StepoverBuilder.StepoverTypes) - Method in interface nxopen.cam.StepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStepoverTypeType(StepoverBuilder.StepoverTypes) - Method in interface nxopen.cam.WedmStepoverBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStepSize(double) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStepSize(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStepSize(double) - Method in interface nxopen.die.SpringbackCompensationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR nx_freeform_2 ("advanced freeform modeling")
.
- setStepSizeDouble(double) - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Sets the clearence step size double
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SelectElement
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SelectNode
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyAxis
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyCSYS
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyLocation
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyPlane
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyPoint
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setStepStatusAsString(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setStepText(String[]) - Method in interface nxopen.blockstyler.Wizard
-
Sets the StepText.
- setStepTime(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setStepType(StepBuilder.StepTypes) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setStepValue(double) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStepWallMethod1(StepBuilder.StepWallMethods) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setStepWallMethod2(StepBuilder.StepWallMethods) - Method in interface nxopen.features.StepBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setStickCollision(boolean) - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setStickyFactor(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setStiffenerBySupportMethod(StiffenerBySupportPathBuilder.Method) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setStiffnessCurve(MotionFunction) - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStiffnessFunction(Function) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStiffnessOption(AnalyticalContactPropertyBuilder.StiffnessType) - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStiffnessR(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessRR(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessRS(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessRX(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessRY(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessRZ(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessS(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessState(SpringEADBuilder.State) - Method in interface nxopen.cae.SpringEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessType(ConnectionDBItemStiffnessType) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.SpringBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setStiffnessX(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessY(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStiffnessZ(double) - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStitchMethod(EdgeSticherBuilder.StitchMethods) - Method in interface nxopen.cae.EdgeSticherBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStitchOption(EdgeSticherBuilder.StitchOptions) - Method in interface nxopen.cae.EdgeSticherBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStitchOption(boolean) - Method in interface nxopen.cae.FaceFaceImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStitchToggle(boolean) - Method in interface nxopen.cae.EdgeFaceImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setStitchToggle(boolean) - Method in interface nxopen.cae.ImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSTLFileUnits(STLImportBuilder.STLFileUnitsTypes) - Method in interface nxopen.facet.STLImportBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setStlFileUnits(BodyByEquationBuilder.StlFileUnitTypes) - Method in interface nxopen.features.BodyByEquationBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStock(double) - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setStock(double) - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
License requirements: cam_base ("CAM BASE")
.
- setStock(double) - Method in interface nxopen.cam.BoundaryMillingSet
-
License requirements: cam_base ("CAM BASE")
.
- setStock(double) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setStock(double) - Method in interface nxopen.cam.BoundaryTurnSet
-
License requirements: cam_base ("CAM BASE")
.
- setStock(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setStock(Stock) - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Sets the value of stock, stock width and stock thickness to the builder.
- setStockAllowance(double) - Method in interface nxopen.cam.ProbeStockParametersBuilder
-
License requirements: None.
- setStockAnchor(String) - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Sets
License requirements: routing_base ("Routing Basic")
.
- setStockAnchor(String) - Method in interface nxopen.preferences.RoutingStock
-
Sets the
Anchor
name associated with the stock preferences.
- setStockAnchor(String) - Method in interface nxopen.routing.OverstockBuilder
-
Sets the
Anchor
name associated with the overstock.
- setStockAnchor(String) - Method in interface nxopen.routing.StockBuilder
-
Sets the
Anchor
name associated with the stock.
- setStockBoundedDiameter(double) - Method in interface nxopen.routing.SplinePathBuilder
-
Sets the driving diameter of the current stock for the ratio-to-diameter bounded curvature.
- setStockComponentLockedPlugin(CustomManager.StockComponentLockedPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will call to see if a stock component is modifiable.
- setStockData(StockData) - Method in interface nxopen.routing.Stock
-
- setStockData(StockData) - Method in interface nxopen.routing.StockDataRefreshBuilder
-
Sets
License requirements: routing_base ("Routing Basic")
.
- setStockDefinition(StockDefinition) - Method in interface nxopen.routing.StockDevice
-
Sets the stock definition.
- setStockFolder(String) - Method in interface nxopen.preferences.RoutingStock
-
Sets the default folder for stock components
License requirements: routing_base ("Routing Basic")
.
- setStockLength(BillOfMaterialBuilder.StockLengthType) - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setStockLength(double) - Method in interface nxopen.routing.StockDevice
-
Sets the stock length.
- setStockLengthDisplayFlag(RoutingPart.StockLengthDisplay) - Method in interface nxopen.preferences.RoutingPart
-
Sets the stock length display for the Routing bill of material.
- setStockLensType(CameraBuilder.StockLens) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setStockList(Stock[]) - Method in interface nxopen.routing.AssignCornerBuilder
-
Set the
Stock
object list when list box
is updated.
- setStockList(Stock[]) - Method in interface nxopen.routing.CopeCornerBuilder
-
- setStockMethodType(PathStockPreferenceBuilder.StockMethod) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Sets the method to determine which stock to assign.
- setStockMode(TurnRoughFinishTestCut.StockModeTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setStockMode(RoutingStock.StockModeFlag) - Method in interface nxopen.preferences.RoutingStock
-
Sets the stock creation mode
License requirements: routing_base ("Routing Basic")
.
- setStockOffsetExpression(String) - Method in interface nxopen.preferences.RoutingPath
-
License requirements: routing_base ("Routing Basic")
.
- setStockPartName(Tag, String) - Method in interface nxopen.uf.UFRoute
-
- setStockPathId(String) - Method in interface nxopen.pid.PipeBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setStockPieceCount(boolean) - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setStockSetting(SimulationOptionsBuilder.StockType) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStockSettings(PathStockBuilder) - Method in interface nxopen.routing.FillerStockBuilder
-
Sets the stock settings for creating filler stock.
- setStockSettings(PathStockBuilder) - Method in interface nxopen.routing.OverstockBuilder
-
Sets the stock settings for overstock assignment.
- setStockSettings(PathStockBuilder) - Method in interface nxopen.routing.StockBuilder
-
Sets the stock settings for stock assignment.
- setStockSettings(PathStockBuilder) - Method in interface nxopen.routing.StockTransitionBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setStockSizeObject(NXObject) - Method in interface nxopen.tooling.StockSizeBuilder
-
Set stock size object.
- setStockStyle(StockStyle) - Method in interface nxopen.routing.Stock
-
- setStockStyle(StockBuilder.StockStyleType) - Method in interface nxopen.routing.StockBuilder
-
Sets the stock style of the stock to assign
License requirements: routing_base ("Routing Basic")
.
- setStockStyle(int, int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- setStockSubType(PathStockPreferenceBuilder.AssignStockSubType) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Sets the type of stock being assigned.
- setStockTransitionProperties() - Method in interface nxopen.routing.StockTransitionBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setStockType(PathStockPreferenceBuilder.AssignStockType) - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Sets the type of stock being assigned.
- setStockType(PathStockBuilder.AssignStockType) - Method in interface nxopen.routing.PathStockBuilder
-
Sets the type of stock being assigned.
- setStockType(StockSizeBuilder.Shape) - Method in interface nxopen.tooling.StockSizeBuilder
-
- setStockValue(double) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopActive(boolean) - Method in interface nxopen.cam.ManualControlBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopAfter(int) - Method in interface nxopen.mfg.am.Nester3D
-
License requirements: am_pb_mtls_nest_3d_2 ("Advanced NX Powder Bed Additive 3D Nesting") OR am_pb_mtls_nest_3d_1 ("Basic NX Powder Bed Additive 3D Nesting")
.
- setStopAtIntersection(boolean) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setStopAtIntersection(boolean) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setStopCheckCollision(boolean) - Method in interface nxopen.tooling.RunSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStopCheckConstantStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopCheckFaceStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopCheckRadialStock(double) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopDistance(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setStopLimit(int) - Method in interface nxopen.cam.CutDepthChecker
-
License requirements: cam_base ("CAM BASE")
.
- setStopOnCollision(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setStopOnError(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setStopOnEvent(boolean) - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
Sets the Stop_On_Event flag of
PackagingInterference
object
License requirements: mechanisms ("MECHANISMS")
Created in NX4.0.0
- setStopOnEvent(boolean) - Method in interface nxopen.motion.PackagingMeasureBuilder
-
Sets the Stop_On_Event flag of
PackagingMeasure
object
License requirements: mechanisms ("MECHANISMS")
Created in NX4.0.0
- setStopOnEventOption(boolean) - Method in interface nxopen.motion.PostProcess
-
Set articulation stop on event option animation/articulation/spreadsheet run
License requirements: mechanisms ("MECHANISMS")
.
- setStopOnHistoryBuffer(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setStopOnLimit(boolean) - Method in interface nxopen.cam.CutDepthChecker
-
License requirements: cam_base ("CAM BASE")
.
- setStopOnLimitViolation(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setStopOnRapidThroughIpw(boolean) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setStopOnWarning(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setStopPercentage(double) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setStopPoint(Point) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopPoint(Point) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setStopPointDistance(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopPointFlag(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopPointFlag(WedmGeomBuilder.StopPointFlagTypes) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopPointFlag(WedmOperationBuilder.StopPointFlagTypes) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopPointType(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopPointType(WedmGeomBuilder.StopPointTypes) - Method in interface nxopen.cam.WedmGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopPointType(WedmOperationBuilder.StopPointTypes) - Method in interface nxopen.cam.WedmOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopPosition(TurnRoughFinishTestCut.StopPositionTypes) - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
License requirements: cam_base ("CAM BASE")
.
- setStopPositionMethod(TeachmodeProfileMoveBuilder.StartStopPositionMethods) - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopRadius(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStopWhenLimitReached(boolean) - Method in interface nxopen.cam.GougeCheckBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStopWhenLimitReachedMaximumLimit(int) - Method in interface nxopen.cam.GougeCheckBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setStoreColor(boolean) - Method in interface nxopen.features.ColorFeatureBuilder
-
License requirements: None.
- setStoreEnable(boolean) - Method in interface nxopen.motion.GraphBuilder
-
- setStoreLogFileInTeamCenter(boolean) - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setStoreModelViewPreview(boolean) - Method in interface nxopen.PreviewPropertiesBuilder
-
License requirements: None.
- setStoreOption(boolean) - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setStorePartPreview(boolean) - Method in interface nxopen.PreviewPropertiesBuilder
-
License requirements: None.
- setStrainType(LsdynaFormAnalysisResultDisplayBuilder.StrainTypeName) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStrakingSplitSystem(boolean) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setStrAnnot(String) - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setStrAnnotFileName(String) - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setStrategy(TBSOptimizationSolutionBuilder.StrategyType) - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setStreamIO(int) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setStreamIO(SHMSignalConnectionBuilder.StreamIOType) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setStreamIO(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setStreamOption(ExternalConnectionElementBuilder.StreamType) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setStrength(DurabilityStrength) - Method in interface nxopen.cae.DurabilityEventBuilder
-
The event strength settings stored inside the event.
- setStrengthRatio(boolean) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setStrengthRatio(boolean) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setStrengthRatio(boolean) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setStrengthRatioRule(LaminateGraphicalReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setStrengthRatioRule(LaminateQuickReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setStrengthRatioRule(LaminateSpreadsheetReportBuilder.EnvelopeRule) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setStrengthSafetyFactor(boolean) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStrengthSafetyFactor(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStressAxisDirectionSearchMethod(DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStressAxisMethod(DurabilityStressAxesBuilder.StressAxisMethodEnum) - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStressCriteriaType(StrengthStressCriteria) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setStressCriterion(DurabilityEventStrengthSettingsBuilder.StressCriterionEnum) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStressDirection(Direction) - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStressOptionType(StrengthStressOption) - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setStressType(DurabilityEventStrengthSettingsBuilder.StressTypeEnum) - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setStressType(LsdynaFormAnalysisResultDisplayBuilder.StressTypeName) - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStretchDirection(Direction) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setStretchDirection(Direction) - Method in interface nxopen.features.OvercrownBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setString(String, String) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the string value for the given property name.
- setString(int, int, String) - Method in interface nxopen.ITableEditorDataProvider
-
Sets string data at a particular location in the table.
- setString(int[], int, String) - Method in interface nxopen.ITableEditorDataProvider
-
Sets string data on a range of table cells in a specified column.
- setString(String, String) - Method in interface nxopen.PropertyContainer
-
Sets the string value for the given property name.
- setString(int, int, SpreadsheetCellData, int) - Method in interface nxopen.Spreadsheet
-
Sets the string in the cell.
- setString(UFVariant, String, String) - Method in interface nxopen.uf.UFMom
-
- setString(UFVariant, String, String) - Method in interface nxopen.uf.UFUde
-
- setStringArray(UFVariant, String, int, String[]) - Method in interface nxopen.uf.UFMom
-
- setStringArrayPreference(String, String[]) - Method in interface nxopen.preferences.RoutingUserPreferences
-
Sets the values of the named string array user preference in the current NX session.
- setStringArrayPropertyValue(String, String[]) - Method in interface nxopen.cae.PropertyTable
-
Sets the string array value of the property
License requirements: None.
- setStringArrayValue(String, String[]) - Method in interface nxopen.cam.CAMObject
-
Set string array to the parameter index for the object
License requirements: cam_base ("CAM BASE")
.
- setStringDatumFeatName(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringDatumLetter(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringFeatureName1(String) - Method in interface nxopen.cam.InspectionOutputOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringFeatureName2(String) - Method in interface nxopen.cam.InspectionOutputOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringFilterRule(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStringLimit1(String) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStringLimit2(String) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setStringList(String[]) - Method in interface nxopen.AttributeTemplatesBuilder
-
Sets the string list.
- setStringNameRule(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStringOriginFeatName(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringPreference(String, String) - Method in interface nxopen.preferences.RoutingUserPreferences
-
Sets the value of the named string user preference in the current NX session.
- setStringPrefixI(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringPrefixJ(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringPrefixK(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringPrefixLabel(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringPrefixLevel(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringPrefixX(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringPrefixY(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringPrefixZ(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringPriDatum(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringPriDatum1(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringPropertyValue(String, String) - Method in interface nxopen.BasePropertyTable
-
Sets the string value of the property
License requirements: None.
- setStrings(String, String[]) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the strings value for the given property name.
- setStrings(String[]) - Method in interface nxopen.features.UserDefinedFeatureApplicationField
-
Sets all of the strings in this field
License requirements: None.
- setStrings(String, String[]) - Method in interface nxopen.PropertyContainer
-
Sets the strings value for the given property name.
- setStrings(String[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Sets all of the strings stored with this UDO
License requirements: None.
- setStrings(int, int, String[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Replaces the strings stored with this UDO in the specified range with a new array of strings
License requirements: None.
- setStringSecDatum(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringSecDatum1(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringSheetName(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStringStock(String) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: None.
- setStringSuffixI(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringSuffixJ(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringSuffixK(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringSuffixLabel(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringSuffixLevel(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringSuffixX(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringSuffixY(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringSuffixZ(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setStringTerDatum(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringTerDatum1(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringText(String[]) - Method in interface nxopen.annotations.CompanyProprietaryInformationBuilder
-
Sets the str text
License requirements: None.
- setStringText(String[]) - Method in interface nxopen.annotations.ExportControlBuilder
-
Sets the str text
License requirements: None.
- setStringText(String[]) - Method in interface nxopen.annotations.GovernmentSecurityInformationBuilder
-
Sets the str text
License requirements: None.
- setStringText(String) - Method in interface nxopen.cam.UdeParameter
-
License requirements: cam_base ("CAM BASE")
.
- setStringTimeUserAttribute(Tag, String, int, String, boolean) - Method in interface nxopen.uf.UFAttr
-
- setStringTolerancedFeat(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringTolName(String) - Method in interface nxopen.cam.InspectionOutputOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringTolName(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setStringToObjectMap(String, TaggedObject) - Method in interface nxopen.linedesigner.FactoryCadGeoEquipmentAssemblyBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setStringToReplace(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setStringUgAttribute(UFVariant, String, String) - Method in interface nxopen.uf.UFMfm
-
- setStringUserAttribute(Tag, String, int, String, boolean) - Method in interface nxopen.uf.UFAttr
-
- setStringValue(String) - Method in interface nxopen.annotations.PmiAttributeValueStringBuilder
-
License requirements: None.
- setStringValue(String) - Method in interface nxopen.annotations.PmiStringBuilder
-
License requirements: None.
- setStringValue(String) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setStringValue(String) - Method in interface nxopen.cam.CAMAttribute
-
Get the feature attribute string value for a string type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.
- setStringValue(String, String) - Method in interface nxopen.cam.CAMObject
-
Set a string value to the parameter index for the object.
- setStringValue(String, String) - Method in interface nxopen.cam.Cycle
-
Set the string value of the parameter
License requirements: cam_base ("CAM BASE")
.
- setStringValue(String) - Method in interface nxopen.cam.UdeParameter
-
- setStringValue(String) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setStringValue(String) - Method in interface nxopen.SpreadsheetCellData
-
License requirements: None.
- setStringValueOfAttribute(UFVariant, String, String) - Method in interface nxopen.uf.UFMfm
-
- setStripLength(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setStripMaterial(String) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setStripperPlateClearance(double) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStripperPlateClearance(double) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setStripperPlateClearance(double) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setStripThickness(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setStripTravelDistance(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setStripVector(Direction) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setStripWidthResult(double) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setStrokeColor(NXColor) - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
License requirements: None.
- setStrokeOpacity(double) - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
License requirements: None.
- setStrokePerMinute(double) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: None.
- setStrokesPerMinute(double) - Method in interface nxopen.tooling.SetPressModelBuilder
-
License requirements: nx_dievalidation ("DIE VALIDATION")
.
- setStructureOrderFunctionIndex(int) - Method in interface nxopen.ame.EplanProjectTemplateAndStructureBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStructureOrderLocationIndex(int) - Method in interface nxopen.ame.EplanProjectTemplateAndStructureBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStructures(boolean) - Method in interface nxopen.ObjectTypeSelector
-
License requirements: None.
- setStrValue(Tag, int, String) - Method in interface nxopen.uf.UFParam
-
- setStubLength(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the stub length
License requirements: None.
- setStubLength(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStubLength(double) - Method in interface nxopen.diagramming.LeaderLineBuilder
-
License requirements: None.
- setStubLength(double) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setStubSide(LeaderSide) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStubSides(DiagrammingStubsides) - Method in interface nxopen.diagramming.LeaderLineBuilder
-
License requirements: None.
- setStubSize(double) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStubSymbolType(StubSymbolType) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setStubType(ChamferStubType) - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Sets the stub type
License requirements: None.
- setStudioMaterialEditorEditingMode(SessionVisualizationHighEndRendering.MaterialEditorEditingMode) - Method in interface nxopen.preferences.SessionVisualizationHighEndRendering
-
License requirements: None.
- setStudyName(String) - Method in interface nxopen.optimization.DesignStudyBuilder
-
License requirements: None.
- setStudyName(String) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setStyle(ViewSectionLineBuilder.StyleType) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setStyle(CurveCurvatureAnalysisBuilder.DisplayStyle) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setStyle(HumanHandsDialogBuilder.StyleType) - Method in interface nxopen.HumanHandsDialogBuilder
-
License requirements: ug_human ("Human Modelling")
.
- setStyle(OffSheetConnectorBuilder.StyleOption) - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setStyle(PreferencesOffSheetConnectorBuilder.StyleOption) - Method in interface nxopen.pid.PreferencesOffSheetConnectorBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setStyle(StockStyle) - Method in interface nxopen.routing.CrossSection
-
License requirements: routing_base ("Routing Basic")
.
- setStyleColor(AmeOpticalConnectionFiberType, NXColor) - Method in interface nxopen.ame.OpticalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStyleColorCode(AmeElectricalConnectionPotentialType, NXColor) - Method in interface nxopen.ame.ElectricalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStyleFont(AmeElectricalConnectionPotentialType, DisplayableObject.ObjectFont) - Method in interface nxopen.ame.ElectricalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStyleFont(AmeOpticalConnectionFiberType, DisplayableObject.ObjectFont) - Method in interface nxopen.ame.OpticalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStyleWidth(AmeElectricalConnectionPotentialType, DisplayableObject.ObjectWidth) - Method in interface nxopen.ame.ElectricalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setStyleWidth(AmeOpticalConnectionFiberType, DisplayableObject.ObjectWidth) - Method in interface nxopen.ame.OpticalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSubAssembly(boolean) - Method in interface nxopen.tooling.ValidCheckBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSubcase(int) - Method in interface nxopen.cae.DurabilityRandomEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSubcase(int) - Method in interface nxopen.cae.DurabilityTransientEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSubcase(SimSolutionStep) - Method in interface nxopen.cae.MechanicalLoadSumBuilder
-
The subcase object
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSubcase(boolean, int) - Method in interface nxopen.cae.optimization.TBSLoadCase
-
Sets the load cases
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSubcategory(String) - Method in interface nxopen.PhysicalMaterial
-
Sets the material sub-category
License requirements: None.
- setSubComponent(boolean) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSubdivideNumSegments(int) - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setSubdivideRegion(boolean) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setSubdivisionMethod(SubdivideFacetBodyBuilder.SubdivisionMethodType) - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSubFeat1Filter(boolean) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSubFeat1Name(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSubFeat1StateEnum(InspectionConstructedFeatureBuilder.SubFeat1StateType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSubFeat2Filter(boolean) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSubFeat2Name(String) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSubFeat2StateEnum(InspectionConstructedFeatureBuilder.SubFeat2StateType) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSubFeatures(String[]) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Set the current subfeatures
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSubFeatures(String[]) - Method in interface nxopen.cam.InspectionPatternFeatureBuilder
-
Sets the current subfeatures.
- setSubFeatureStates(InspectionConstructedFeatureBuilder.CurrentStateType[]) - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Set the current subfeature states.
- setSubGraphInStack(int) - Method in interface nxopen.cae.xyplot.OverlayParameters
-
License requirements: None.
- setSubMenu(int, TreeListMenu) - Method in interface nxopen.blockstyler.TreeListMenu
-
Sets a submenu.
- setSubmitOptions(DurabilityEventSolverBuilder.SubmitOptionsEnum) - Method in interface nxopen.cae.DurabilityEventSolverBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSubmitOptions(DurabilitySolverBuilder.SubmitOptionsEnum) - Method in interface nxopen.cae.DurabilitySolverBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setSubobjPtrValue(Tag, int, UFVariant) - Method in interface nxopen.uf.UFParam
-
- setSubopLabel(String) - Method in interface nxopen.cam.MoveBuilder
-
License requirements: None.
- setSubRegion(boolean) - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage
-
Sets the setting for whether the High Quality Image is generated from a sub-region.
- setSubscript(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setSubscriptSizeFactor(double) - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSubsetDescription(String) - Method in interface nxopen.assemblies.SubsetBuilder
-
- setSubsetName(String) - Method in interface nxopen.assemblies.SubsetBuilder
-
- setSubsetPart(Part) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setSubstep(boolean, int[]) - Method in interface nxopen.cae.optimization.TBSLoadCase
-
Sets the sub steps
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSubtract(boolean) - Method in interface nxopen.tooling.SolidPatchBuilder
-
License requirements: None.
- setSubtype(HoleFeatureBuilder.HoleSubtype) - Method in interface nxopen.features.HoleFeatureBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- setSubtype(PositioningDimension.Subtype) - Method in interface nxopen.features.RPODimension
-
License requirements: None.
- setSubtype(CircularFrameBuilder.Subtypes) - Method in interface nxopen.geometricutilities.CircularFrameBuilder
-
License requirements: None.
- setSubtype(QuadrilateralFrameBuilder.Subtypes) - Method in interface nxopen.geometricutilities.QuadrilateralFrameBuilder
-
License requirements: None.
- setSubtype(TriangularFrameBuilder.Subtypes) - Method in interface nxopen.geometricutilities.TriangularFrameBuilder
-
License requirements: None.
- setSubType(LayoutBuilder.LayoutSubType) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setSubType(ReusePositioningObjectBuilder.SubTypes) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setSuffix(String) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSuffix(String) - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setSuffixStr(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSuggestScaleFactor(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSummary(String[]) - Method in interface nxopen.drafting.DrawingCreationWizardBuilder
-
Sets the summary
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setSuperElementIncrement(int) - Method in interface nxopen.motion.BodyContactSphereToCAD
-
License requirements: mechanisms ("MECHANISMS")
.
- setSuperElementReportInstance(int) - Method in interface nxopen.motion.AnalyticalContactBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSuperElementReportInstance(int) - Method in interface nxopen.motion.BodyContactSphereToCAD
-
License requirements: mechanisms ("MECHANISMS")
.
- setSuperIterationType(ResultProbeBuilder.SuperIterType) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setSupplementarySymbol(SupplementarySymbol) - Method in interface nxopen.annotations.LineWeldSideData
-
Sets the weld supplementary symbol
License requirements: None.
- setSupportAllPids(boolean) - Method in interface nxopen.cae.WeldBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setSupportCapOptions(PillarBuilder.CapOptions) - Method in interface nxopen.features.shipdesign.PillarBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setSupportCapOptions(SteelSupportBuilder.CapOptions) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSupportedFacetTypes(int) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setSupportFaces(ScCollector) - Method in interface nxopen.features.GeodesicSketchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSupportPlane(Plane) - Method in interface nxopen.geometricutilities.SupportPlaneData
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSupportPlaneLockStatus(SupportPlaneData.LockPlaneStatus) - Method in interface nxopen.geometricutilities.SupportPlaneData
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSupportsFromCeiling(boolean) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setSupportSize(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSupportType(int) - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setSuppress(boolean) - Method in interface nxopen.cam.Cutcom
-
License requirements: cam_base ("CAM BASE")
.
- setSuppress(boolean) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setSuppressAction(SuppressByExpressionBuilder.ExpressionAction) - Method in interface nxopen.SuppressByExpressionBuilder
-
License requirements: None.
- setSuppressAngularZerosOption(AngularSuppressZeros) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the angular dimension suppress zeros option
License requirements: None.
- setSuppressBasedOnVolume(boolean) - Method in interface nxopen.cam.MinCutVolume
-
License requirements: cam_base ("CAM BASE")
.
- setSuppressCutcom(boolean) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setSuppressCutcom(boolean) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSuppressed(boolean) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSuppressed(boolean) - Method in interface nxopen.Validation
-
License requirements: None.
- setSuppressedInArrangement(Arrangement, boolean) - Method in interface nxopen.positioning.ComponentConstraint
-
- setSuppressExpTag(Tag, Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- setSuppressionExp(Tag, String) - Method in interface nxopen.uf.UFAssem
-
- setSuppressionMethod(SuppressPMIBuilder.SuppressionMethodType) - Method in interface nxopen.annotations.SuppressPMIBuilder
-
License requirements: None.
- setSuppressPathDisplayFlag(boolean) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSuppressPreZeros(boolean) - Method in interface nxopen.uf.UFDrf
-
- setSuppressRetainedPmis(boolean) - Method in interface nxopen.annotations.PmiPreferences
-
License requirements: None.
- setSuppressState(int, int, boolean) - Method in interface nxopen.geometricutilities.PatternDefinition
-
Sets the suppress state for the instance at the specified indicies.
- setSuppressSurfaceModification(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the suppress surface modification flag.
- setSuppressViewUpdat(boolean) - Method in interface nxopen.uf.UFDraw
-
- setSuppressViewUpdate(boolean) - Method in interface nxopen.uf.UFDrf
-
- setSuppressWarningMessages(boolean) - Method in interface nxopen.VRMLImporter
-
Sets the Suppress Warning Messages flag.
- setSurface(NXObject) - Method in interface nxopen.cam.DrillSurfaceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSurface(NXObject) - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setSurfaceAngleAcceptableColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSurfaceAngleFailureColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSurfaceAngleFailureLimit(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSurfaceAngleWarningColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSurfaceAngleWarningLimit(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setSurfaceBuildMethod(AddendumSectionBuilder.SurfaceBuildType) - Method in interface nxopen.die.AddendumSectionBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSurfaceDatatype(RoadBuilder.SurfaceDatatypeChoices) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSurfaceDesignU(int) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setSurfaceDesignV(int) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setSurfaceDisplay(ViewVisualizationVisual.SurfaceDisplayOptions) - Method in interface nxopen.preferences.ViewVisualizationVisual
-
- setSurfaceDisplayOptions(Tag, UFView.RenderingStyle, UFView.EdgeDisplayOptions) - Method in interface nxopen.uf.UFView
-
- setSurfaceExtension(SessionModeling.SurfaceExtensionOption) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setSurfaceFileName(String) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setSurfaceFinishCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the surface finish symbol color, font, and width
License requirements: None.
- setSurfaceFinishColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSurfaceFinishFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSurfaceFinishType(SearchCriteriaSurfaceFinishBuilder.SurfaceFinishTypes) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setSurfaceFinishWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSurfaceLength(GroundClearanceBuilder.SurfaceLengthType) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSurfaceNormalVectorI(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSurfaceNormalVectorJ(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSurfaceNormalVectorK(double) - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSurfaceOffset(double) - Method in interface nxopen.die.PadChildBuilder
-
Sets the surface offset of the die pad.
- setSurfaceOffset(double) - Method in interface nxopen.die.PadParentBuilder
-
Sets the surface offset of die pads.
- setSurfaceOffset(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setSurfaceOption(DrillSurfaceBuilder.SurfaceType) - Method in interface nxopen.cam.DrillSurfaceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSurfaceOrientEnum(TrueShadingBuilder.SurfaceOrientType) - Method in interface nxopen.display.TrueShadingBuilder
-
License requirements: None.
- setSurfacePercentageEndFirst(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Set percentage end first
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageEndFirst(double) - Method in interface nxopen.cam.DmSurfBuilder
-
Set the end first
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageEndLast(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Set percentage end last
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageEndLast(double) - Method in interface nxopen.cam.DmSurfBuilder
-
Set the end last
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageEndStep(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Set percentage end step
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageEndStep(double) - Method in interface nxopen.cam.DmSurfBuilder
-
Set the end step
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageStartFirst(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Set percentage start first
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageStartFirst(double) - Method in interface nxopen.cam.DmSurfBuilder
-
Set the start first
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageStartLast(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Set percentage start last
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageStartLast(double) - Method in interface nxopen.cam.DmSurfBuilder
-
Set the start last
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageStartStep(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Set percentage start step
License requirements: cam_base ("CAM BASE")
.
- setSurfacePercentageStartStep(double) - Method in interface nxopen.cam.DmSurfBuilder
-
Set the start step
License requirements: cam_base ("CAM BASE")
.
- setSurfacePointUV(Point3d) - Method in interface nxopen.features.SnipSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSurfaceProfile(InspectionMethodBuilder.SurfaceProfileTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSurfaceProfileMode(InspectionMethodBuilder.SurfaceProfileTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSurfaceRegionName(String) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setSurfaces(boolean) - Method in interface nxopen.ObjectTypeSelector
-
License requirements: None.
- setSurfaceSensitivityMode(TurnFeatureGeomBuilder.SurfaceSensitivityModes) - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSurfaceSensitivityTolerance(double) - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSurfaceShapeOption(ExtendSheetBuilder.SurfaceShape) - Method in interface nxopen.features.ExtendSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSurfaceShapeOption(ExtendSheetBuilder.SurfaceShape) - Method in interface nxopen.features.TrimAndExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSurfaceTolerance(double) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setSurfaceType(OnestepUnformBuilder.Surface) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setSurfaceType(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Sets the unform surface type.
- setSurfaceType(TrimLineDevelopmentBuilder.Surface) - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSurfaceType(ExtractFaceBuilder.FaceSurfaceType) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSurfaceType(TirePropertyAdvancedParameters.SurfType) - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setSurfaceType(MWDesignPartingSurfaceBuilder.PartingSurfaceType) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setSurfaceTypeOption(BodyContactRecurdyn.SurfaceType) - Method in interface nxopen.motion.BodyContactRecurdyn
-
License requirements: mechanisms ("MECHANISMS")
.
- setSurfTrimTol(double) - Method in interface nxopen.IgesImporter
-
License requirements: None.
- setSurroundingDataProximityDistance(double) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
License requirements: None.
- setSurroundingDataRecipeMethodType(MechanicalRoutingSubsetBuilder.SurroundingDataRecipeMethod) - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setSurroundingPatchSurfaceFilename(String) - Method in interface nxopen.features.FeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSuspectBoundingBoxColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setSuspensionTemplate(TireEnvelopeBuilder.SuspensionTemplateType) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSuspensionTemplateFileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setSuspentionTemplatePoint(TireEnvelopeBuilder.SuspensionTemplateType, int, Point3d) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Change the location of a joint in the suspension template.
- setSwap(boolean) - Method in interface nxopen.features.ShelfBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setSwapProfile(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
Sets the profile swap flag.
- setSwapProfile(boolean) - Method in interface nxopen.routing.StockBuilder
-
Sets the profile swap flag.
- setSwapUandV(boolean) - Method in interface nxopen.SurfaceUVDirectionBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setSwarfGougeCheck(boolean) - Method in interface nxopen.cam.ToolAxisAdvanced
-
License requirements: cam_base ("CAM BASE")
.
- setSwarfTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setSweepAngle(double) - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
License requirements: None.
- setSweepAxis(Tag, double[]) - Method in interface nxopen.uf.UFModl
-
- setSweepDistance(String) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
- setSweepOrientation(SweptVolumeBuilder.SweepOrient) - Method in interface nxopen.features.SweptVolumeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSweepSide(ContourFlangeBuilder.SweepSideOptions) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Sets the projection direction of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSweepTolerances(Tag) - Method in interface nxopen.uf.UFModl
-
- setSweepType(ContourFlangeBuilder.SweepTypeOptions) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Sets the projection side of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setSwingAngle(double) - Method in interface nxopen.cam.NcmEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSwingAngle(double) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSwingAngle(double) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setSwitchDirection(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSwitchSide(boolean) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setSwitchSide(boolean) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setSwitchSide(boolean) - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setSwitchStartEnd(boolean) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setSwitchTrimSide(boolean) - Method in interface nxopen.die.MachineReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setSxlineDefaultPrfs(UFDraw.ArrowParms, UFDraw.SxlineDisplay) - Method in interface nxopen.uf.UFDraw
-
- setSxviewDisplay(Tag, UFDraw.SxviewPrfs) - Method in interface nxopen.uf.UFDraw
-
- setSymbol(FeatureControlFrameIndicatorBuilder.FcfIndicatorCharacteristic) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSymbol(Symbol) - Method in interface nxopen.annotations.LineWeldSideData
-
Sets the elementary weld symbol
License requirements: None.
- setSymbol(PartsListBuilder.PartsListSymbolType) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: None.
- setSymbolAlignment(String, TextWithSymbolsBuilder.SymbolAlignmentType) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
Set the alignement on embedded symbol correspoding to symbol name
License requirements: drafting ("DRAFTING")
.
- setSymbolAngle(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the user defined symbol angle with baseline, if the symbol is not aligned with
the baseline
License requirements: None.
- setSymbolAngle(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSymbolAnnotationAnchor(SymbolAnnotationBuilder.Anchor) - Method in interface nxopen.ame.SymbolAnnotationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolAnnotationHeight(double) - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolAnnotationOrientation(SymbolAnnotationBuilder.Orientation) - Method in interface nxopen.ame.SymbolAnnotationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolAnnotationPoint(Point2d) - Method in interface nxopen.ame.SymbolAnnotationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolAnnotationTextAlignment(int) - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolAnnotationTextCFW(TextColorFontWidthBuilder) - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolAnnotationTextOverlined(boolean) - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolAnnotationTextUnderlined(boolean) - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolAspectRatio(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the user defined symbol aspect ratio
License requirements: None.
- setSymbolAspectRatio(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSymbolAspectRatio(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSymbolAutoUpdate(boolean) - Method in interface nxopen.annotations.SymbolWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSymbolCfw(LineCfw) - Method in interface nxopen.annotations.Gdt
-
Sets the symbol color, font, and width.
- setSymbolCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSymbolData(CustomSymbolData) - Method in interface nxopen.annotations.BaseCustomSymbol
-
- setSymbolFont(DrawingCompareSettingsBuilder.FontType) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSymbolFontFile(String) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSymbolHeight(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the user defined symbol height
License requirements: None.
- setSymbolHeight(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSymbolHeight(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSymbolicName(String) - Method in interface nxopen.ame.FunctionCallInstanceBuilder
-
Updates the idb symbolic name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolicName(String) - Method in interface nxopen.ame.InstanceDataBlockBuilder
-
Updates the idb symbolic name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolId(String) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setSymbolId(String) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setSymbolLeaderTerminatorCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSymbolLength(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the user defined symbol length
License requirements: None.
- setSymbolLength(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSymbolLength(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSymbolName(String) - Method in interface nxopen.ame.PlcSymbolBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolName(String) - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Sets the symbol name
License requirements: None.
- setSymbolName(String) - Method in interface nxopen.annotations.MasterCustomSymbolData
-
- setSymbolName(String) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSymbolName(String) - Method in interface nxopen.annotations.ReplaceSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSymbolName(String) - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSymbolOriginCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSymbolPath(String) - Method in interface nxopen.annotations.ReplaceSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSymbolPlacement(ChamferSymbolPlacement) - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Sets the symbol placement
License requirements: None.
- setSymbolPlacement(DiameterRadiusSymbolPlacement) - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Sets the diameter/radius symbol placement relative to the dimension text
License requirements: None.
- setSymbolPreferences(SymbolPreferences) - Method in interface nxopen.annotations.Annotation
-
Sets the symbol preferences for the annotation.
- setSymbolPreferences(SymbolPreferences) - Method in interface nxopen.annotations.SimpleDraftingAidPreferences
-
Sets the symbol preferences
License requirements: None.
- setSymbolPreferences(TextWithSymbolsBuilder.SymbolPreferencesType) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSymbolPreferences(SymbolPreferences) - Method in interface nxopen.preferences.AnnotationPreferences
-
Sets the global symbol preferences for the part
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSymbolPreferences(UFDrf.SymbolPreferences) - Method in interface nxopen.uf.UFDrf
-
- setSymbolPreferencesOption(SymbolPreferencesOption) - Method in interface nxopen.annotations.CustomSymbolData
-
- setSymbolPropertiesTable(String, String) - Method in interface nxopen.ame.SchematicSymbolConfigurationBuilder
-
Set the symbol properties
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolRepresentationType(Manage2dSymbolsBuilder.SymbolRepresentationTypes) - Method in interface nxopen.ame.Manage2dSymbolsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setSymbolRetainedStatusCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSymbolRule(String) - Method in interface nxopen.drafting.RulesBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setSymbols(SymbolTableBuilder.Symbol[]) - Method in interface nxopen.mechatronics.SymbolTableBuilder
-
Sets all Symbols.
- setSymbolScale(double) - Method in interface nxopen.annotations.LineWeldData
-
Sets the symbol scale
License requirements: None.
- setSymbolScale(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the user defined symbol scale
License requirements: None.
- setSymbolScale(double) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSymbolScale(double) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSymbolSize(double) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSymbolSize(double) - Method in interface nxopen.preferences.PartVisualizationLine
-
Sets the symbol size.
- setSymbolSizeMethod(TextWithSymbolsBuilder.SymbolSizingMethod) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setSymbolSmashToSketch(boolean) - Method in interface nxopen.annotations.SymbolWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setSymbolSourceType(SymbolSourceOption) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setSymbolSourceType(SymbolSourceOption) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setSymbolTextCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSymbolToDimensionTextDistance(double) - Method in interface nxopen.annotations.RadialStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setSymbolType(IdSymbolBuilder.SymbolTypes) - Method in interface nxopen.annotations.IdSymbolBuilder
-
- setSymbolType(ImportAutocadBlockBuilder.Type) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setSymbolType(DrawingCompareSettingsBuilder.ChangeSymbolType) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSymbolType(Symbol) - Method in interface nxopen.weld.JointExitBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setSymbolWidth(DrawingCompareSettingsBuilder.WidthType) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setSymmetric(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setSymmetric(boolean) - Method in interface nxopen.geometricutilities.CurveExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setSymmetric(boolean) - Method in interface nxopen.geometricutilities.SplineExtensionBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSymmetric(boolean) - Method in interface nxopen.SketchOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSymmetricalStructure(SectionViewBuilder.SymmetricalStructureOptions) - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
- setSymmetricalStructure(SectionViewBuilder.SymmetricalStructureOptions) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setSymmetricAngle(boolean) - Method in interface nxopen.features.DraftBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSymmetricEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSymmetricEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setSymmetricOffsets(boolean) - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setSymmetricOption(boolean) - Method in interface nxopen.geometricutilities.Limits
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setSymmetricSides(boolean) - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setSymmetry(boolean) - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setSymmetryOption(int) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setSymmetryPlane(Plane) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setSymmetryPlane(Plane) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSymmetryPlaneOption(EdgeSymmetryBuilder.SymmetryPlaneOptions) - Method in interface nxopen.features.EdgeSymmetryBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setSymmetryPlaneOption(SymmetricBuilder.PlaneOptions) - Method in interface nxopen.features.SymmetricBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setSymmetryType(TBSTopologyLinkCondition.SymmetryOption) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setSyncArrangements(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
- setSynchDisplayProperties(boolean) - Method in interface nxopen.assemblies.AddComponentBuilder
-
Sets the option to synchronize display properties with the component to be added
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setSynchlinkEntry(boolean) - Method in interface nxopen.features.WaveDatumBuilder
-
Sets Entry From SynchLink
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setSynchroniseOnLoad(SessionPdm.SynchroniseOnLoadType) - Method in interface nxopen.preferences.SessionPdm
-
License requirements: None.
- setSynchroniseOnSave(SessionPdm.SynchroniseOnSaveType) - Method in interface nxopen.preferences.SessionPdm
-
License requirements: None.
- setSynchronizeArcsFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions
-
Sets the synchronize arcs flag
License requirements: None.
- setSynchronizeConicsFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions
-
Sets the synchronize conics flag
License requirements: None.
- setSynchronizeCoordinateSystemFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions
-
Sets the synchronize coordinate system flag
License requirements: None.
- setSynchronizeLinesFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions
-
Sets the synchronize lines flag
License requirements: None.
- setSynchronizePointsFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions
-
Sets the synchronize points flag
License requirements: None.
- setSynchronizeSketchCurvesFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions
-
Sets the synchronize sketch curves flag
License requirements: None.
- setSynchronizeSplinesFlag(boolean) - Method in interface nxopen.cae.FemSynchronizeOptions
-
Sets the synchronize splines flag
License requirements: None.
- setSyncOrigin(int) - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setSyncViews(boolean) - Method in interface nxopen.View
-
Sets the "Synchronized Views" toggle state of a view.
- setSysDefidenticalPointResolution(boolean) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setSysDefmaxThreeDMdlSpace(boolean) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setSystemParameters(UFDisp.SystemParams) - Method in interface nxopen.uf.UFDisp
-
- setTabCurveTypeDisplayData(boolean, PartSheetmetal.TabCurveType, PartSheetmetal.TabCurveTypeDisplayData) - Method in interface nxopen.preferences.PartSheetmetal
-
Sets the display data for a given tab curve type.
- setTabDetection(boolean) - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTabDetection(boolean) - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTabDirection(TableCellStyleBuilder.TabDirectionType) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTable(TagTableObject) - Method in interface nxopen.mechatronics.ReadWriteDeviceBuilder
-
- setTableCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setTableData(int, String, String, Function.InterpolationMethod) - Method in interface nxopen.cae.FunctionBuilder
-
Sets data for a table function.
- setTableFile(String) - Method in interface nxopen.cae.connections.IDiameter
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTableIndex(int) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Sets the table index
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.
- setTableOrigin(Point) - Method in interface nxopen.tooling.HoleReportBuilder
-
License requirements: None.
- setTablePropertyOverride(String) - Method in interface nxopen.BasePropertyTable
-
Set property override flag.
- setTablePropertyWithoutValue(String) - Method in interface nxopen.BasePropertyTable
-
Unset a property.
- setTableRotationsAtSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTables(Table[]) - Method in interface nxopen.diagramming.DefineTitleBlockBuilder
-
Set tables.
- setTableSize(int, int, double) - Method in interface nxopen.GeneralScalarTable
-
Sets the table size
License requirements: None.
- setTabMethod(TabPointDataBuilder.TabMethodType) - Method in interface nxopen.cam.TabPointDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTabsPerRow(int) - Method in interface nxopen.blockstyler.TabControl
-
License requirements: None.
- setTabThreadMethod(TabPointDataBuilder.TabThreadMethodType) - Method in interface nxopen.cam.TabPointDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTabThreadPoint(Point) - Method in interface nxopen.cam.TabPointDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTabularNoteParams(Tag, UFDraw.TabnotParams) - Method in interface nxopen.uf.UFDraw
-
- setTabWidth(double) - Method in interface nxopen.cam.TabPointDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTaggedObject(String, TaggedObject) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the tagged object for the given property name.
- setTaggedObject(String, TaggedObject) - Method in interface nxopen.PropertyContainer
-
Sets the tagged object for the given property name.
- setTaggedObjectSelectionCallbacks(SelectionHandle, Selection.FilterTaggedObjectCallback, Selection.TaggedObjectSelectionCallback) - Method in interface nxopen.Selection
-
Specify selection filter callback for additional filtering of tagged objects based on
application specific criteria, and/or selection callback to perform
application specific processing for each selection gesture processed.
- setTaggedObjectVector(String, TaggedObject[]) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the tagged object vector for the given property name.
- setTaggedObjectVector(String, TaggedObject[]) - Method in interface nxopen.PropertyContainer
-
Sets the tagged object vector for the given property name.
- setTagLocation(Point2d) - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
License requirements: None.
- setTagMask(String) - Method in interface nxopen.pid.PreferencesGeneralBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setTagPriority(GroupLabel.TagPriorityOption) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setTagPriorityOfGroupLabel(GroupLabel, GroupLabel.TagPriorityOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setTags(ProfinetClientBuilder.TagInfo[]) - Method in interface nxopen.mechatronics.ProfinetClientBuilder
-
Set Profinet Client Infomation
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setTagValue(Tag, int, Tag) - Method in interface nxopen.uf.UFParam
-
- setTagVla(Tag, int, int, Tag[]) - Method in interface nxopen.uf.UFParam
-
- setTail(LineWeldBuilder.TailType) - Method in interface nxopen.annotations.LineWeldBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setTail(Tail) - Method in interface nxopen.annotations.LineWeldData
-
Sets the tail for the reference line
License requirements: None.
- setTailSpecificationText(String[]) - Method in interface nxopen.annotations.LineWeldData
-
Sets the tail specification text
License requirements: None.
- setTangencyCollector(ScCollector) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTangent(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setTangent(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTangent2dComponentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setTangentAngle(double) - Method in interface nxopen.weld.WeldBeadBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTangentColor(int) - Method in interface nxopen.preferences.SessionModeling
-
Sets the tangent color
License requirements: None.
- setTangentDirection(Direction) - Method in interface nxopen.features.GeometricConstraintData
-
License requirements: None.
- setTangentDirectionVector(Direction) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setTangentEdgeAngle(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setTangentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setTangentEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setTangentialExtension(boolean) - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTangentMagnitude(Scalar) - Method in interface nxopen.features.GeometricConstraintData
-
License requirements: None.
- setTangentPlane(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setTangentPlaneType(SearchCriteriaFeatureControlFrameBuilder.TangentPlaneOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setTangentSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setTangentSurface(ISurface) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTangentTolerance(double) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setTangentTolerance(double) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setTangentTolerance(double) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setTangentTolerance(double) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setTangentTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setTangentTolerance(double) - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
License requirements: nx_freeform_1 ("basic freeform modeling") OR features_modeling ("FEATURES MODELING")
.
- setTangentTolerance(double) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTangentTolerance(double) - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setTangentTolerance(double) - Method in interface nxopen.features.ThroughCurvesBuilder
-
License requirements: features_modeling ("FEATURES MODELING") OR nx_freeform_1 ("basic freeform modeling")
.
- setTangentTolerance(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTapDrillSize(double) - Method in interface nxopen.cam.ThreadedHoleSet
-
License requirements: cam_base ("CAM BASE")
.
- setTaperAngle(double) - Method in interface nxopen.cam.WireGuide
-
License requirements: cam_base ("CAM BASE")
.
- setTaperAngle(String) - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
- setTaperAngleType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setTaperAngleValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setTaperAtEnd(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setTaperAtStart(String) - Method in interface nxopen.weld.GrooveBuilder
-
- setTaperBead(boolean) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTaperLocationAY(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setTaperLocationBX(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setTaperLocationXAxis(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setTaperLocationYAxis(double) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setTaperMethod(WeldTaperMethod) - Method in interface nxopen.weld.GrooveBuilder
-
- setTaperMethod(WeldGrooveBuilder.Taper) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTaperPoint(Point) - Method in interface nxopen.die.DrawBeadTaperBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTapers(EmbossTaper[]) - Method in interface nxopen.features.EmbossSidewall
-
The sidewall tapers
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTaperSides(BendTaperBuilder.BendTaperSides) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setTaperType(DrawBeadTaperBuilder.TaperTypes) - Method in interface nxopen.die.DrawBeadTaperBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTaperType(EndCutBlockBuilder.TaperTypeOption) - Method in interface nxopen.EndCutBlockBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setTarget(String) - Method in interface nxopen.cae.SimLoadRecipeMapEntry
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTarget(CartesianCoordinateSystem) - Method in interface nxopen.cam.RobotCartesianMove
-
License requirements: cam_base ("CAM BASE")
.
- setTarget(Plane) - Method in interface nxopen.display.RasterImageBuilder
-
License requirements: None.
- setTarget(Body) - Method in interface nxopen.features.BlockFeatureBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTarget(Body) - Method in interface nxopen.features.BooleanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTarget(ScCollector) - Method in interface nxopen.features.OffsetEmbossBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTarget(NXObject) - Method in interface nxopen.features.RPODimension
-
License requirements: None.
- setTarget(ShipPreparationInfo) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setTarget(DisplayableObject) - Method in interface nxopen.geometricutilities.Extend
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTarget(DisplayableObject) - Method in interface nxopen.layout2d.ReparentComponentBuilder
-
License requirements: None.
- setTargetAndTool(PositioningDimension.Subtype, NXObject, RPOBuilder.AssociativityType, Point3d, NXObject, RPOBuilder.AssociativityType, Point3d) - Method in interface nxopen.features.RPOBuilder
-
Sets the target and tool entities.
- setTargetAreaXhatch(Tag, double, double) - Method in interface nxopen.uf.UFGdt
-
- setTargetAssociativity(AssociativityType) - Method in interface nxopen.features.RPODimension
-
License requirements: None.
- setTargetBinderType(LsdynaGeometryPreparationBuilder.TargetBinder) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTargetBodies(Body[]) - Method in interface nxopen.geometricutilities.BooleanOperation
-
Set the target bodies
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTargetBody(ScCollector) - Method in interface nxopen.features.EmbossBodyBuilder
-
License requirements: None.
- setTargetBody(Body) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets target body for the hole.
- setTargetBody(Body) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the target body on which the normal cutout is created.
- setTargetBody(Body) - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Sets the target body on which the secondary tab is created.
- setTargetBody(Body) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setTargetBody(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setTargetBodyCollector(ScCollector) - Method in interface nxopen.features.SplitBodyBuilder
-
License requirements: None.
- setTargetBodyCollector(ScCollector) - Method in interface nxopen.features.TrimBody2Builder
-
License requirements: None.
- setTargetBodyForSubtract(Body) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTargetCenter(TaggedObject) - Method in interface nxopen.cae.connections.INodalTargetCenter
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetClass(String) - Method in interface nxopen.cam.CutterExport
-
License requirements: None.
- setTargetComponents(NXObject[]) - Method in interface nxopen.features.MasterCutBuilder
-
The target components that are cut
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetComponentSelection(boolean) - Method in interface nxopen.features.PaintParametersBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetConnection(Connection) - Method in interface nxopen.ame.TeeJunctionBuilder
-
Set Target Connection where TeeJunction must be created.
- setTargetCorrectionMode(SignalProcessingPlotData.CorrectionMode) - Method in interface nxopen.cae.SignalProcessingPlotData
-
License requirements: None.
- setTargetCurveOffsetType(GlobalShapingBuilder.OffsetMethod) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetCurveOrientation(GlobalShapingBuilder.TargetCurveOrientationType) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetCurveType(MorphRevolvedMeshBuilder.CurveType) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetDieType(LsdynaGeometryPreparationBuilder.TargetDie) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTargetDirectory(String) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: None.
- setTargetDirectory(String) - Method in interface nxopen.tooling.SetPressModelBuilder
-
License requirements: nx_dievalidation ("DIE VALIDATION")
.
- setTargetDynamicPlane(CoordinateSystem) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setTargetEdgeEndPoint(Point) - Method in interface nxopen.cae.ContactMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetEdgeStartPoint(Point) - Method in interface nxopen.cae.ContactMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetElementEdgePathMethod(ElemEdgePathMethod) - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
Set the target elemnt path of the selection
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetFace(ScCollector) - Method in interface nxopen.features.EmbossTarget
-
Sets the target faces on which the emboss places.
- setTargetFace(Face) - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Sets the target face on which bend feature applies.
- setTargetFace(Face) - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Sets the target face on which jog feature applies.
- setTargetFace(Face) - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Sets the target face to target surface data.
- setTargetFace(NXObject) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setTargetFaces(NXObject[]) - Method in interface nxopen.features.OvercrownBuilder
-
Sets the target faces for the Global Shaping Operator
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetFemoccs(FEModelOccurrence[]) - Method in interface nxopen.cae.ImportSimulationBuilder
-
Set FeModel Occurrences to import onto
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetFileName(String) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setTargetGroup(CaeGroup) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetGroupFilterType(int) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetIds(int[]) - Method in interface nxopen.cae.ModelUpdateSensitivityViewerBuilder
-
Sets the terget IDs
License requirements: nx_correl_update ("FE Model Update")
.
- setTargetIndex(int) - Method in interface nxopen.annotations.IDatumTarget
-
Sets the datum target index.
- setTargetLayer(int) - Method in interface nxopen.motion.PackagingTraceBuilder
-
Sets the
PackagingTrace
target layer
License requirements: mechanisms ("MECHANISMS")
Created in NX4.0.0
- setTargetLineEnd(Point) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetLineStart(Point) - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetList(PackagingMeasureBuilder.GeometryData[]) - Method in interface nxopen.motion.PackagingMeasureBuilder
-
Sets the target geometry data.
- setTargetMaterialSide(boolean) - Method in interface nxopen.features.EmbossBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetMatrix(Matrix3x3) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setTargetObjective(TBSObjectives.ObjectiveType) - Method in interface nxopen.cae.optimization.TBSObjectives
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setTargetOption(ConvertToConvergentBodyBuilder.Option) - Method in interface nxopen.cae.ConvertToConvergentBodyBuilder
-
License requirements: None.
- setTargetOption(FitSurfaceBuilder.TargetType) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setTargetPart(TaggedObject) - Method in interface nxopen.annotations.PmiWaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetPartitions(Partition[]) - Method in interface nxopen.pid.FileNewApplicationBuilder
-
- setTargetPartitionSet(Partition[]) - Method in interface nxopen.assemblies.Subset
-
Sets the list of array of target partitions on the subsetInstance
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setTargetPathFolderBrowser(String) - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTargetPlane(Plane) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setTargetPoint(Point) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetPoint(Point) - Method in interface nxopen.cam.BoundaryTurnBlank
-
License requirements: cam_base ("CAM BASE")
.
- setTargetPoint(Point) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTargetPoint(Point) - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTargetPoint(Point) - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
License requirements: None.
- setTargetPoint(Point) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: None.
- setTargetPoint(Point) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetPoint(Point3d) - Method in interface nxopen.features.RPODimension
-
License requirements: None.
- setTargetPointMethod(GlobalShapingBuilder.PointMethodType) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetPorts(NXObject[]) - Method in interface nxopen.ame.PortConnectionBuilder
-
Sets ports to connect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTargetPosition(Point3d) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setTargetProductionUnit(ModelPlantRoot, ModelProductionUnit, boolean) - Method in interface nxopen.linedesigner.ModelPlantManager
-
Set Target Production Unit
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setTargetPunchType(LsdynaGeometryPreparationBuilder.TargetPunch) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTargetReduction(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTargetRegions(int[]) - Method in interface nxopen.cam.MergeSubopCommand
-
Set the target region
License requirements: None.
- setTargetReversed(boolean) - Method in interface nxopen.features.TrimExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTargets(EmbossTarget[]) - Method in interface nxopen.features.EmbossLimit
-
The emboss targets
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargets(Body[]) - Method in interface nxopen.features.TrimBodyBuilder
-
Sets the targets for a trim body opearation.
- setTargetScaling(SignalProcessingPlotData.ScalingType) - Method in interface nxopen.cae.SignalProcessingPlotData
-
License requirements: None.
- setTargetScope(RelinkerBuilder.LinkScope) - Method in interface nxopen.assemblies.RelinkerBuilder
-
License requirements: wave ("WAVE FUNCTIONALITY")
.
- setTargetSegmentId(int) - Method in interface nxopen.ame.TeeJunctionBuilder
-
Set Target Connection's segmentId
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTargetSelectScope(TrimMoldComponentsBuilder.TargetScope) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
License requirements: None.
- setTargetSetDistributedPlanes(int, SetManager.DistributedPlanesPosition, Point, SetManager.DistributedPlanesPosition, Expression, Expression, SetManager.DistributedPlanesBboxType, FEElement[], SetManager.DistributedPlanesBoundingSphereType, SetManager.DistributedPlanesBoundingSphereDirection, Direction, Point, Point, Point, boolean, int) - Method in interface nxopen.cae.SetManager
-
Sets the parameters for a distributed planes set.
- setTargetSetEdgePath(int, CAEEdge[], CAEVertex[]) - Method in interface nxopen.cae.SetManager
-
- setTargetSetEdgePath(int, CAEEdge[], CAEVertex[], boolean[], boolean[], double[]) - Method in interface nxopen.cae.SetManager
-
Sets the CAE edge path in the specified set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetSetElemEdgePath(int, FEElemEdge[], FENode[]) - Method in interface nxopen.cae.SetManager
-
- setTargetSetElemEdgePath(int, FEElemEdge[], FENode[], boolean[], boolean[], boolean[], double[], boolean[], double[]) - Method in interface nxopen.cae.SetManager
-
Sets the CAE element edge path in the specified set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetSetExcludedMembers(int, SetObject[]) - Method in interface nxopen.cae.SetManager
-
Sets the CAE objects in the specified target set exclude set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetSetExcludedMembers(int, CaeSetGroupFilterType, SetObject[]) - Method in interface nxopen.cae.SetManager
-
Sets the CAE objects in the specified target set exclude set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetSetGroup(int, CaeSetGroupFilterType, CaeGroup) - Method in interface nxopen.cae.SetManager
-
Sets the CAE group in the specified set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetSetMembers(int, SetObject[]) - Method in interface nxopen.cae.SetManager
-
Sets the CAE objects in the specified set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetSetMembers(int, CaeSetGroupFilterType, SetObject[]) - Method in interface nxopen.cae.SetManager
-
Sets the CAE objects in the specified set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetSetPlane(int, Point3d, Vector3d) - Method in interface nxopen.cae.SetManager
-
- setTargetSetPlaneWithOffset(int, Point3d, Vector3d, Expression) - Method in interface nxopen.cae.SetManager
-
Creates a plane target set.
- setTargetSetPointLocation(int, Point3d) - Method in interface nxopen.cae.SetManager
-
Creates a point location target set.
- setTargetSourceType(FitCurveBuilder.TargetSourceTypes) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTargetSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the target symbol color, font, and width
License requirements: None.
- setTargetSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTargetSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTargetSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTargetType(int, NodalTargetType) - Method in interface nxopen.cae.connections.INodalTargetsContainer
-
Set the target type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetType(SimLoadRecipeMapEntryTargetTypes.TargetTypes) - Method in interface nxopen.cae.SimLoadRecipeMapEntry
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTargetType(FillHoleBuilder.TargetTypes) - Method in interface nxopen.facet.FillHoleBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTargetType(SplitProfilePlateBuilder.ProfileType) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setTargetType(SubdivisionProjectCageBuilder.TargetTypes) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setTargetUnit(Unit) - Method in interface nxopen.cae.optimization.DAOObjective
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetValue(double) - Method in interface nxopen.cae.optimization.DAOObjective
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTargetVector(Direction) - Method in interface nxopen.routing.AlignStockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setTargetVolume(double) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setTargetWeighting(SignalProcessingPlotData.AcousticalWeighting) - Method in interface nxopen.cae.SignalProcessingPlotData
-
License requirements: None.
- setTargetWindowSetting(Preference.TargetGraphicWindowOption) - Method in interface nxopen.cae.xyplot.Preference
-
License requirements: None.
- setTask(EmbedManagerBuilder.TaskTypes) - Method in interface nxopen.features.EmbedManagerBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTaskDescription(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setTblDepColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- setTblDepDomColor(DisplayPropertiesBuilder.DepDomColorEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- setTblDepLabelValues(DisplayPropertiesBuilder.DepLabelValueEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setTblDepPtType(DisplayPropertiesBuilder.TblPointTypeEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- setTblDepSymbolSize(double) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setTblIndepColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- setTblIndepPtType(DisplayPropertiesBuilder.ValuesEnum) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- setTeamcenter(boolean) - Method in interface nxopen.annotations.ImportSymbolBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setTechniqueType(CgfxMattexBuilder.Technique) - Method in interface nxopen.display.CgfxMattexBuilder
-
- setTeeJunctionRepresentationStyle(Node[], AmeJunctionRepresentationStyleType) - Method in interface nxopen.ame.DiagramManager
-
Set representation style for tee Junction
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTeeJunctionType(AmeTeeJunctionType) - Method in interface nxopen.ame.TeeJunctionBuilder
-
Set TeeJunction type.
- setTeeJunctionVariant(Node[], AmeTeeJunctionVariant) - Method in interface nxopen.ame.DiagramManager
-
Set variant for tee Junction
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTeeJunctionVariant(AmeTeeJunctionVariant) - Method in interface nxopen.ame.TeeJunctionBuilder
-
Set TeeJunction variant.
- setTeeSize(double) - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setTeethNumber(double) - Method in interface nxopen.cam.VerticalPosition
-
License requirements: cam_base ("CAM BASE")
.
- setTemperaturePlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTemperatureUnits(InspectionCmmCommandBuilder.TemperatureUnitsOptions) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTemplate(String, String) - Method in interface nxopen.cam.FeatureProcessBuilder
-
Sets the active template name and the feature process template
License requirements: ug_holemaking ("UG Holemaking")
.
- setTemplateBaseTcType(String) - Method in interface nxopen.pid.FileNewApplicationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setTemplateCategoryName(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setTemplateDataName(String) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
The template data name of holder or pallet.
- setTemplateFile(String) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setTemplateFile(String) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setTemplateFile(String) - Method in interface nxopen.report.Report
-
License requirements: None.
- setTemplateFile(String) - Method in interface nxopen.weld.WeldImportBuilder
-
License requirements: None.
- setTemplateFileName(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setTemplateFileName(String) - Method in interface nxopen.pid.FileNewApplicationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setTemplateFileName(String) - Method in interface nxopen.weld.ExportWeldBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTemplateInstantiationIsComplete(boolean) - Method in interface nxopen.DraftingManager
-
Set the drawing template instantiation status
License requirements: drafting ("DRAFTING")
.
- setTemplateName(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setTemplateName(String) - Method in interface nxopen.features.shipdesign.DrawingTemplateBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTemplateName(String) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setTemplateName(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setTemplateName(String) - Method in interface nxopen.tooling.EjectorTableBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setTemplateObjects(AMEBaseNode[]) - Method in interface nxopen.ame.BreakTemplateBuilder
-
Selected objects those are part of templates to break
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTemplatePartName(String) - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
The template part name of holder or pallet.
- setTemplatePresentationName(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setTemplatePresentationName(String) - Method in interface nxopen.pid.FileNewApplicationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setTemplateProject(Project) - Method in interface nxopen.ame.CreateTemplateDefinitionBuilder
-
Set the template part
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTemplates(AttributeTemplatesBuilder.TemplatesOptions) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setTemplateSetName(String) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setTemplateSheet(ExportToDWGBuilder.TemplateTypeAPI) - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setTemplateStatus(CAMObject[], boolean, boolean) - Method in interface nxopen.cam.CAMSetup
-
Set Template status
License requirements: cam_base ("CAM BASE")
.
- setTemplateStatus(CAMObject[], boolean, boolean) - Method in interface nxopen.cam.InspectionSetup
-
Set Template status
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTemplateTcType(String) - Method in interface nxopen.pid.FileNewApplicationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setTemplateType(MarkAsTemplateBuilder.TemplateTypeEnum) - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTemplateType(FileNewTemplateType) - Method in interface nxopen.FileNew
-
License requirements: None.
- setTemplateType(FileNewTemplateType) - Method in interface nxopen.pid.FileNewApplicationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setTemplateUnits(Part.Units) - Method in interface nxopen.pid.FileNewApplicationBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setTemporaryFacetDisplay(boolean) - Method in interface nxopen.facet.PaintBrushBuilder
-
Flag to use temporary facet display
License requirements: None.
- setTempOrientation(Matrix3x3) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setTempPosition(Point3d) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setTensileStrength(double) - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTensorComponentAbsoluteValue(Result.TensorDerivedAbsolute) - Method in interface nxopen.cae.CrossSectionParameters
-
Set the method used when calculating the absolute values for the derived components of
Result.DataType.TENSOR
like
Result.Component.MAXIMUM_PRINCIPAL
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX8.0.1
- setTensorComponentAbsoluteValue(Result.TensorDerivedAbsolute) - Method in interface nxopen.cae.ResultParameters
-
Set the method used when calculating the absolute values for the derived components of
Result.DataType.TENSOR
like
Result.Component.MAXIMUM_PRINCIPAL
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX8.0.1
- setTerDatLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTerDirection(InspectionAlignmentBuilder.AlignmentDirections) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTerminalPort(NXObject) - Method in interface nxopen.routing.TerminalPortBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setTerminalSegmentSolidDisplay(boolean) - Method in interface nxopen.preferences.RoutingElectrical
-
Sets the terminal segment solid display option
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setTerminatingObjects(DisplayableObject[]) - Method in interface nxopen.markup.MarkupObject
-
Sets the terminating objects
License requirements: None.
- setTerminator(SheetElement, int, double, double, double, double) - Method in interface nxopen.diagramming.LeaderLineBuilder
-
Sets the terminator of the leader.
- setTerminatorType(DatumTargetBuilder.TerminatorTypes) - Method in interface nxopen.annotations.DatumTargetBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setTerminatorType(LeaderData.LeaderType) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTertiaryDatumDualMCMType(SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setTertiaryDatumDualText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setTertiaryDatumExtendedText(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setTertiaryDatumMCMType(SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setTertiaryDatumReference(DatumReference) - Method in interface nxopen.annotations.FcfFrame
-
- setTertiaryDatumText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- setTertiaryDirection(InspectionAlignmentAssistantBuilder.Direction) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTertiaryOffsetGeometry(NXObject) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTertiaryRoughnessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setTertiaryRoughnessType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setTertiaryState(InspectionAlignmentAssistantBuilder.State) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTertiaryType(InspectionAlignmentAssistantBuilder.FeatureType) - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTerXorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTerYorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTerZorigin(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTessellation(boolean) - Method in interface nxopen.ObjectTypeSelector
-
License requirements: None.
- setTessellationFactor(double) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setTessellationFile(String) - Method in interface nxopen.motion.BodyContactSphereToCAD
-
License requirements: mechanisms ("MECHANISMS")
.
- setTessOption(JtCreator.TessellationOption) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setTessOption(ListCreator.TessellationOption) - Method in interface nxopen.ListCreator
-
License requirements: None.
- setTestDirectionOption(TBSTestFunction.Direction) - Method in interface nxopen.cae.optimization.TBSTestFunction
-
License requirements: cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setTestOutput(String) - Method in interface nxopen.BaseSession
-
- setTestOutput(String, int) - Method in interface nxopen.BaseSession
-
- setText(String[]) - Method in interface nxopen.annotations.BalloonNoteBuilder
-
Sets the text
License requirements: None.
- setText(String[]) - Method in interface nxopen.annotations.CustomSymbolTextData
-
- setText(String[]) - Method in interface nxopen.annotations.GeneralNoteBuilder
-
Sets the text
License requirements: None.
- setText(String[]) - Method in interface nxopen.annotations.LabelData
-
Sets the text
License requirements: None.
- setText(String[]) - Method in interface nxopen.annotations.NoteData
-
Sets the text
License requirements: None.
- setText(String) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setText(String) - Method in interface nxopen.annotations.SearchCriteriaPMINotesBuilder
-
License requirements: None.
- setText(String[]) - Method in interface nxopen.annotations.SimpleDraftingAid
-
Sets the drafting aid's text.
- setText(String[]) - Method in interface nxopen.annotations.SpecificNoteBuilder
-
Sets the text
License requirements: None.
- setText(String[]) - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
Sets the text of the annotation
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setText(String) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setText(String[]) - Method in interface nxopen.cam.Notes
-
Sets the text
License requirements: cam_base ("CAM BASE")
.
- setText(String[]) - Method in interface nxopen.cam.StringList
-
Sets the text
License requirements: cam_base ("CAM BASE")
.
- setText(String) - Method in interface nxopen.diagramming.AnnotationBuilder
-
License requirements: None.
- setText(String) - Method in interface nxopen.diagramming.tables.CellBuilder
-
License requirements: None.
- setText(String[]) - Method in interface nxopen.report.TextItem
-
Set the text content.
- setTextAboveLeader(DiameterRadiusLeaderStub) - Method in interface nxopen.annotations.RadialStyleBuilder
-
- setTextAboveLeader(UFDrf.TextAboveLeader) - Method in interface nxopen.uf.UFDrf
-
- setTextAlignment(DraftingNoteBuilder.TextAlign) - Method in interface nxopen.annotations.DraftingNoteBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTextAlignment(TableCellStyleBuilder.TextAlignmentType) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTextAlignment(TextStyleBuilder.TextAlignmentType) - Method in interface nxopen.diagramming.TextStyleBuilder
-
License requirements: None.
- setTextAllowWrapping(boolean) - Method in interface nxopen.diagramming.TextStyleBuilder
-
License requirements: None.
- setTextAngle(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTextAngle(double) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTextArrowPlacement(TextPlacement) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTextAutoFit(TextStyleBuilder.TextAutoFitType) - Method in interface nxopen.diagramming.TextStyleBuilder
-
License requirements: None.
- setTextBoxIndent(int) - Method in interface nxopen.diagramming.CannedAnnotationBuilder
-
License requirements: None.
- setTextBoxModifiable(boolean) - Method in interface nxopen.diagramming.CannedAnnotationBuilder
-
License requirements: None.
- setTextBoxShadowBox(boolean) - Method in interface nxopen.diagramming.CannedAnnotationBuilder
-
License requirements: None.
- setTextCentered(boolean) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTextColor(NXColor) - Method in interface nxopen.cae.PostAnnotation
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setTextColor(double[]) - Method in interface nxopen.cam.WorkInstructionBuilder
-
Sets the text color
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setTextColor(NXColor) - Method in interface nxopen.TextColorFontWidthBuilder
-
License requirements: None.
- setTextData(CustomSymbolTextData[]) - Method in interface nxopen.annotations.CustomSymbolData
-
- setTextDisplay(boolean) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTextExtension(String) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTextFont(String) - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
License requirements: None.
- setTextFont(String) - Method in interface nxopen.TextColorFontWidthBuilder
-
License requirements: None.
- setTextFont(AutoDimensionBuilder.TextFontType) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTextFontMappingFile(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setTextFontMappingFile(String) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setTextFontStyle(TextBuilder.FontStyleOptions) - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
License requirements: None.
- setTextGapFactor(double) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTextHeight(double) - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTextHeight(double) - Method in interface nxopen.diagramming.TextStyleBuilder
-
License requirements: None.
- setTextLocation(Point) - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setTextMode(UFText.ModeS) - Method in interface nxopen.uf.UFText
-
Deprecated.
- setTextOrienationAngle(double) - Method in interface nxopen.annotations.DimensionPreferences
-
- setTextOrientation(TextOrientation) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the text orientation
License requirements: None.
- setTextOrientation(TextOrientation) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the text orientation
License requirements: None.
- setTextOrientation(AutoDimensionBuilder.TextOrientationType) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTextOrientationAngle(double) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
- setTextOverLeaderGapFactor(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the character size factor that controls the gap between text and the leader
License requirements: None.
- setTextOverLeaderGapFactor(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTextOverlined(boolean) - Method in interface nxopen.diagramming.TextStyleBuilder
-
License requirements: None.
- setTextOverStubFactor(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTextOverStubSpaceFactor(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the text to stub spacing factor
License requirements: None.
- setTextPlacement(TextPlacement) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the dimension text placement
License requirements: None.
- setTextPlacement(ViewDetailLabelBuilder.LabelParentTextPlacement) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTextPlaneRelativeToArrow(CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
License requirements: geometric_tol ("GDT")
.
- setTextPosition(TextPosition) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the text position representing above or after stub
License requirements: None.
- setTextPosition(TextPosition) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: None.
- setTextPosition(Point2d) - Method in interface nxopen.cae.xyplot.NoteModel
-
Sets the display position of note content.
- setTextPositionHorizontal(GeneralAnnotationSettingsBuilder.HorizontalTextPosition) - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTextPositionVertical(GeneralAnnotationSettingsBuilder.VerticalTextPosition) - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTextPreferencesOption(TextPreferencesOption) - Method in interface nxopen.annotations.CustomSymbolData
-
- setTextPropertyValue(String, String[]) - Method in interface nxopen.cae.PropertyTable
-
Sets the text value of the property
License requirements: None.
- setTexts(String[]) - Method in interface nxopen.cae.xyplot.NoteModel
-
Sets the note content.
- setTextScale(double) - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
License requirements: None.
- setTextSize(double) - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setTextSizeFixed(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not dimension text size is fixed.
- setTextSizeFixed(boolean) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the setting that controls whether or not the dimension text size should be fixed.
- setTextString(String) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTextStyle(String) - Method in interface nxopen.TextColorFontWidthBuilder
-
License requirements: None.
- setTextSymbolDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the text symbol of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTextToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTextToLineDistance(double) - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Sets the text to line distance
License requirements: None.
- setTextToLineDistance(double) - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTextType(MasterSymbolListItemBuilder.TextTypes) - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaPMINotesBuilder
-
License requirements: None.
- setTextType(AnnotationBuilder.TextTypeOption) - Method in interface nxopen.diagramming.AnnotationBuilder
-
License requirements: None.
- setTextUnderlined(boolean) - Method in interface nxopen.diagramming.TextStyleBuilder
-
License requirements: None.
- setTexturedToggle(boolean) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setTextureSpaceEnum(IrayPlusSimpleMaterialEditorBuilder.TextureSpace) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setTextureSpaceInfo(Tag, UFDisp.TextureSpaceInfo) - Method in interface nxopen.uf.UFDisp
-
- setTextureSpaceShaderType(CgfxMattexBuilder.TextureSpaceShader) - Method in interface nxopen.display.CgfxMattexBuilder
-
- setTextValue(String) - Method in interface nxopen.annotations.BusinessModifier
-
Sets the value
License requirements: geometric_tol ("GDT")
.
- setTextValue(String) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTextWidth(String) - Method in interface nxopen.TextColorFontWidthBuilder
-
License requirements: None.
- setTfeatureSet(Feature) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setTfeatureSet(Feature) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setTgShowA(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTgShowB(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTgtPierceOption(boolean) - Method in interface nxopen.features.ShellBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThickenDirection(boolean) - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setThickenDirection(boolean) - Method in interface nxopen.routing.PlatformCreatorBuilder
-
License requirements: routing_platform ("Routing Platform")
.
- setThickenOption(boolean) - Method in interface nxopen.features.EmbossBodyBuilder
-
License requirements: None.
- setThickenOption(PlateStockBuilder.ThickenOptions) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setThickness(double) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setThickness(double) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setThickness(double) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the thickness of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- setThickness(double) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Sets the thickness of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setThickness(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the thickness of the die rib.
- setThickness(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the thickness of die ribs.
- setThickness(double) - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setThickness(String) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
- setThickness(String) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
- setThickness(String) - Method in interface nxopen.features.sheetmetal.TabBuilder
-
- setThickness(double) - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setThickness(boolean, String) - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Sets the thickness value string
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setThickness(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
THE thickness value string
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setThickness(double) - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setThicknessChainEnabled(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setThicknessDimensionType(AeroFlangeBuilder.ThicknessDimensionOptions) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setThicknessDimensionType(AeroRibBuilder.ThicknessDimensionOptions) - Method in interface nxopen.features.AeroRibBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setThicknessDirection(Direction) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setThicknessDirection(Direction) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Sets the thickness direction.
- setThicknessDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.BracketBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setThicknessDirection(StandardPartItemBuilder.Direction) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setThicknessDirection(ThicknessDirectionBuilder.ThicknessDirectionType) - Method in interface nxopen.features.shipdesign.ThicknessDirectionBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setThicknessDirectionOnReference(ThicknessDirectionBuilder.ThicknessDirectionType) - Method in interface nxopen.features.shipdesign.ThicknessDirectionBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setThicknessDirectionOption(DieDesPierceInsertBuilder.Direction) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setThicknessMode(IpwContainmentCurvesBuilder.ThicknessModeValue) - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setThicknessOption(int) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setThicknessOuterRatio(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Thickness Outer Ratio
License requirements: ugweld ("UG WELD")
.
- setThicknessOverride(boolean) - Method in interface nxopen.cae.LaminatePlyMaxThicknessVarBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setThicknessRatio(double) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThicknessRatio(WeldAdvisorCustomerDefault, double) - Method in interface nxopen.weld.WeldAdvisorBuilder
-
The weld advisor parameter Thickness Ratio
License requirements: ugweld ("UG WELD")
.
- setThicknessSide(ContourFlangeBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Sets the thickness side of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setThicknessSide(LoftedFlangeBuilder.SectionSideOptions) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Sets the thickness side of base lofted flange.
- setThicknessSide(TabBuilder.ThicknessSideOptions) - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Sets the sweep direction flag of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setThicknessSourceOption(PlateStockBuilder.ThicknessSourceOptions) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setThicknessState(ShellEADBuilder.State) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setThicknessStr(String) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setThicknessType(TurnToolBuilder.ThicknessTypes) - Method in interface nxopen.cam.TurnToolBuilder
-
License requirements: None.
- setThicknessType(DieEngDieTipBuilder.MaterialThicknessType) - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setThicknessValue(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setThicknessVariationDownLimit(double) - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setThicknessVariationDownLimit(double) - Method in interface nxopen.cae.LaminatePlyMaxThicknessVarBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setThicknessVariationUpLimit(double) - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setThicknessVariationUpLimit(double) - Method in interface nxopen.cae.LaminatePlyMaxThicknessVarBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setThickWidth(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setThinFacets(CleanupFacetBodyBuilder.CleanupOptions) - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setThinWidth(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setThirdClearance(double) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setThirdCut(int) - Method in interface nxopen.cam.DmStreamlineCutStep
-
License requirements: cam_base ("CAM BASE")
.
- setThirdFaceEndParameter(double) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThirdFaceStartParameter(double) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThirdJointAxisType(ThreeJointCouplerBuilder.AxisJointType) - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setThirdMargin(NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setThirdType(GcouplerMovementTypes) - Method in interface nxopen.motion.GeneralCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setThreadDataSource(ThreadFeatureGeometry.ThreadDataSource) - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry
-
Sets the source type for retrieving thread data
License requirements: cam_base ("CAM BASE")
.
- setThreadDepthType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setThreadDepthValue(double) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setThreadedEndChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadedEndChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadedHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setThreadedReliefEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadedReliefEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadedStartChamferEnabled(boolean) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadedStartChamferEnabled(boolean) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadHole(boolean) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
License requirements: None.
- setThreadHolePoint(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setThreadHolePointStatus(int) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setThreadHolePointToolAxis(NXObject) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setThreadLengthOption(HolePackageBuilder.ThreadLengthOptions) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadLengthOption(EndHoleData.ThreadLengthOptions) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadPerUnit(double) - Method in interface nxopen.cam.PitchSetting
-
License requirements: cam_base ("CAM BASE")
.
- setThreadRotation(ThreadFeatureGeometry.Rotation) - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry
-
License requirements: cam_base ("CAM BASE")
.
- setThreadRotation(HolePackageBuilder.ThreadRotationOptions) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadRotation(EndHoleData.ThreadRotationOptions) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadSize(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadSize(String) - Method in interface nxopen.geometricutilities.EndHoleData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreadSizeText(String) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setThreadSizeTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
License requirements: None.
- setThreadsStandardOptionData(int) - Method in interface nxopen.drawings.ThreadsViewStyle
-
Sets the threads standard option
License requirements: drafting ("DRAFTING")
.
- setThreadsStandardOptionData(int) - Method in interface nxopen.preferences.ThreadsViewPreferences
-
Sets the threads standard option.
- setThreadStandard(CustomViewSettingsBuilder.ThreadStandards) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setThreadStandard(String) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setThreeBlanks(boolean) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setThreePoints(Point, Point, Point, DatumPlaneBuilder.UseArcLength) - Method in interface nxopen.features.DatumPlaneBuilder
-
Sets three different points.
- setThresholdType(LaminateSpreadsheetReportBuilder.ThreshType) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setThresholdValue(double) - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
License requirements: nx_lam_composites ("Laminate Composites")
.
- setThroatOrientation(CartesianCoordinateSystem) - Method in interface nxopen.die.RotorBuilder
-
Sets the throat orientation of the rotor casting.
- setThroatThickness(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setThroatThickToggle(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setThroughHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setThroughHoleTextOfType(HoleCalloutSettingsBuilder.Featuretype, String) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
Set Through Hole Text String.
- setThroughPoint(Point) - Method in interface nxopen.features.AOCSBuilder
-
Sets the through point
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setThroughPoint(Point) - Method in interface nxopen.features.ParallelBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setThroughPoint(Point) - Method in interface nxopen.features.PerpendicularBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setThroughPoint(Point) - Method in interface nxopen.features.TangentBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setThroughPoint(Point) - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder
-
License requirements: None.
- setThroughPointLocation(Point) - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setThruFace(ISurface) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets thru face parameter for the hole.
- setTicColor(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setTicDirection(ShipDraftingFramebarGeneralBuilder.TicDirectionTypes) - Method in interface nxopen.annotations.ShipDraftingFramebarGeneralBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTicDisplay(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setTicFont(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setTicLabelTextOrientation(FrameBarElementStyleBuilder.LabelTextOrientation) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setTicLength(double) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setTicWidth(int) - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setTightness(int) - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setTightness(PlateBuilder.TightnessOptions) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setTightness(int) - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setTightness(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setTiltAngle(double) - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTiltAngle(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTiltAngle(double) - Method in interface nxopen.cam.InterpolateVector
-
License requirements: cam_base ("CAM BASE")
.
- setTiltAngle(int, double) - Method in interface nxopen.cam.InterpolateVector
-
Set the tilt angle
License requirements: cam_base ("CAM BASE")
.
- setTiltAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced
-
License requirements: cam_base ("CAM BASE")
.
- setTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setTiltAngle(double) - Method in interface nxopen.cam.ToolPathTiltTilting
-
License requirements: None.
- setTiltAngleType(ToolAxisTilt.TiltAngleTypes) - Method in interface nxopen.cam.ToolAxisTilt
-
License requirements: cam_base ("CAM BASE")
.
- setTiltClearanceAngle(double) - Method in interface nxopen.cam.ToolPathTiltClearance
-
License requirements: None.
- setTiltingDistanceType(ToolPathTiltTilting.ToolAxisTiltingDistTypes) - Method in interface nxopen.cam.ToolPathTiltTilting
-
License requirements: None.
- setTiltingDriveCurve(TaggedObject[]) - Method in interface nxopen.cam.ToolPathTiltTilting
-
The tilting drive curve
License requirements: None.
- setTiltingDrivePoint(TaggedObject) - Method in interface nxopen.cam.ToolPathTiltTilting
-
License requirements: None.
- setTiltingRotationAngle(double) - Method in interface nxopen.cam.ToolPathTiltTilting
-
License requirements: None.
- setTiltingRuleType(ToolPathTiltTilting.ToolAxisTiltingRuleTypes) - Method in interface nxopen.cam.ToolPathTiltTilting
-
License requirements: None.
- setTime(double) - Method in interface nxopen.cam.CutDwell
-
License requirements: cam_base ("CAM BASE")
.
- setTime(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTime(String) - Method in interface nxopen.DateItemBuilder
-
License requirements: None.
- setTimeAttribute(String, String) - Method in interface nxopen.NXObject
-
- setTimeAttribute(String, String, Update.Option) - Method in interface nxopen.NXObject
-
- setTimeDuration(double) - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setTimeEstimate(double) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setTimeExtents(DurabilityDataControlBuilder.TimeExtentsEnum) - Method in interface nxopen.cae.DurabilityDataControlBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setTimeFormatType(TableCellStyleBuilder.TimeFormatTypes) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTimeLimit(double) - Method in interface nxopen.cam.ToolPathDivideBuilder
-
License requirements: None.
- setTimeOfStep(Tag, double) - Method in interface nxopen.uf.UFAssem
-
- setTimePropsFromConditionSequence(SimConditionSequence) - Method in interface nxopen.cae.SimSolution
-
Set the time properties for this solution based on the given condition sequences
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTimePropsFromConditionSequence(SimConditionSequence, int) - Method in interface nxopen.cae.SimSolution
-
Set the time properties for this solution based on the given condition sequences and number of integration steps
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTimePropsFromConditionSequence(SimConditionSequence, double, Unit) - Method in interface nxopen.cae.SimSolution
-
Set the time properties for this solution based on the given condition sequences and integration step size
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTimes(int) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setTimeScaleFactor(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setTimeSensor(SignalChartListItem.Timer) - Method in interface nxopen.motion.SignalChartListItem
-
License requirements: nx_motion_motor ("NX Motion Motor")
.
- setTimesStatus(boolean) - Method in interface nxopen.cam.Cycle
-
License requirements: cam_base ("CAM BASE")
.
- setTimeStamp(int) - Method in interface nxopen.routing.DesignRuleOverride
-
Sets the time stamp of the design rule override is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setTimeStamp(int) - Method in interface nxopen.routing.DesignRuleViolation
-
Sets the date/time stamp of the violation is inquired
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setTimeStatistics(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setTimeStringFormat(String) - Method in interface nxopen.uf.UFAttr
-
- setTimeUnits(Unit) - Method in interface nxopen.cae.SimConditionSequence
-
Sets the time units for the whole sequence
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setTimeUserAttribute(String, int, String, Update.Option) - Method in interface nxopen.NXObject
-
Creates or modifies a time attribute with the option to update or not.
- setTimeUserAttribute(String, int, NXObject.ComputationalTime, Update.Option) - Method in interface nxopen.NXObject
-
Creates or modifies a time attribute with the option to update or not.
- setTimeValue(double) - Method in interface nxopen.cae.AfuZHeaderInfo
-
Sets the value of time field
License requirements: None.
- settingChanged() - Method in interface nxopen.routing.LinearPathBuilder
-
Notifies the builder that some routing preferences have changed, and that the
builder (and it's associated builders) must update their values to refelect those
changes.
- settings() - Method in interface nxopen.annotations.BaseCenterline3dBuilder
-
Returns the settings builder
License requirements: None.
- settings() - Method in interface nxopen.annotations.BaseCenterMarkBuilder
-
Returns the center mark settings builder
License requirements: None.
- settings() - Method in interface nxopen.annotations.Centerline2dBuilder
-
Returns the settings builder
License requirements: drafting ("DRAFTING")
.
- settings() - Method in interface nxopen.annotations.CircleCenterlineBuilder
-
Returns the settings builder object for the centerline
License requirements: None.
- settings() - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder
-
Returns the settings builder object for Symmetrical Centerline
License requirements: None.
- settings() - Method in interface nxopen.cae.qualityaudit.Action
-
Returns the action settings
License requirements: None.
- settings() - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Returns the settings
License requirements: None.
- settings() - Method in interface nxopen.layout2d.AssemblyFromLayout2dBuilder
-
Returns the settings of the assembly creation
License requirements: None.
- settings() - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder
-
Returns the settings of create component from 3D
License requirements: None.
- settings() - Method in interface nxopen.layout2d.InsertComponentBuilder
-
Returns the Component settings block builder which holds the component settings builder
License requirements: None.
- settingsBuilder() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
Returns the settings
License requirements: None.
- SettingsBuilder - Interface in nxopen.drawings
-
- settingsChanged() - Method in interface nxopen.routing.PathStockBuilder
-
Notify the builder that the Routing preferred stock has been modified.
- settingsFile() - Method in interface nxopen.AcisExporter
-
Returns the settings file - The definition file to read default options
License requirements: None.
- settingsFile() - Method in interface nxopen.AcisImporter
-
Returns the settings file - definition file for default options
License requirements: None.
- settingsFile() - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Returns the AutoCAD setting file
License requirements: nx_layout ("NX Layout")
.
- settingsFile() - Method in interface nxopen.Catiav4Creator
-
Returns the settings file - The definition file to read default options
License requirements: None.
- settingsFile() - Method in interface nxopen.Catiav4Importer
-
Returns the settings file - definition file for default settings
License requirements: None.
- settingsFile() - Method in interface nxopen.Catiav5Creator
-
Returns the settings file - The definition file to read default options
License requirements: None.
- settingsFile() - Method in interface nxopen.Catiav5Importer
-
Returns the settings file - definition file for default options
License requirements: None.
- settingsFile() - Method in interface nxopen.DxfdwgCreator
-
Returns the settings file - The definition file to read default options
License requirements: None.
- settingsFile() - Method in interface nxopen.DxfdwgImporter
-
Returns the SettingsFile command - definition file for default options
License requirements: None.
- settingsFile() - Method in interface nxopen.IgesCreator
-
Returns the Settings File to read the default settings
License requirements: None.
- settingsFile() - Method in interface nxopen.IgesImporter
-
Returns the settings file - definition file for default options
License requirements: None.
- settingsFile() - Method in interface nxopen.ProeImporter
-
Returns the settings file - definition file for default options
License requirements: None.
- settingsFile() - Method in interface nxopen.Step203Creator
-
- settingsFile() - Method in interface nxopen.Step203Importer
-
Returns the settings file - definition file for default options
License requirements: None.
- settingsFile() - Method in interface nxopen.Step214Creator
-
- settingsFile() - Method in interface nxopen.Step214Importer
-
Returns the settings file - definition file for default options
License requirements: None.
- settingsFile() - Method in interface nxopen.Step242Importer
-
Returns the settings file - definition file for default options
License requirements: None.
- settingsFile() - Method in interface nxopen.StepCreator
-
Returns the Settings File to read the default settings
License requirements: None.
- settingsFile() - Method in interface nxopen.VirtuallabImporter
-
Returns the settings file - definition file for default options
License requirements: None.
- SettingsManager - Interface in nxopen.drafting
-
Represents an object that manages drafting settings.
- settingsManager() - Method in interface nxopen.Part
-
Returns the SettingsManager for part .
- settingsOrigination() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
Returns the option that indicates the settings origination
License requirements: None.
- settingsToggle() - Method in interface nxopen.features.MapleBuilder
-
- settingWithoutFalseBody() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the setting without false body
License requirements: None.
- settingWithoutFalseBody() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the option of whether to create false body for die or backing insert.
- setTipAngle(String) - Method in interface nxopen.features.HoleFeatureBuilder
-
Sets the tip angle of the hole.
- setTipAngle(double) - Method in interface nxopen.tooling.CoolingExtendBuilder
-
License requirements: None.
- setTipAngleMode(InspectionMoveBuilder.TipAngleTypes) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTipAngleMode(InspectionMoveBuilder.TipAngleTypes) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTipEndType(CoolingDefineChannelBuilder.TipEndTypes) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setTipEndType(CoolingExtendBuilder.TipEndTypes) - Method in interface nxopen.tooling.CoolingExtendBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setTipMode(InspectionMoveBuilder.TipModeTypes) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTipMode(InspectionMoveBuilder.TipModeTypes) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTipNumber(int) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTipNumber(int) - Method in interface nxopen.cam.InspectionMoveBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTipNumber(int) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTipNumber(int) - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTippedProduct(Feature) - Method in interface nxopen.die.FillBuilder
-
Sets the tipped product of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTippedProduct(Feature) - Method in interface nxopen.die.FlangeTaskBuilder
-
Sets the tipped product of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTippedProduct(Feature) - Method in interface nxopen.die.FormTaskBuilder
-
Sets the tipped product of the form task.
- setTippedProduct(Feature) - Method in interface nxopen.die.PierceTaskBuilder
-
Sets the tipped product of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTippedProduct(Feature) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the tipped product of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTipString(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
- setTipString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTipType(InspectionProbeTrackingBuilder.TipTypes) - Method in interface nxopen.cam.InspectionProbeTrackingBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTireBodyOutputFileName(String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setTireControlFile(String) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setTireDefinition(TireEnvelopeBuilder.TireDefinitionOption) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setTireProfileSketch(String, String) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Set the sketch containing the tire profiles by the given part name and sketch name.
- setTireProfileSketch(Sketch) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Set the sketch containing the tire profiles by the given sketch object.
- setTireSide(TirePropertyTnoBuilder.TireSideType) - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setTireType(TireBuilder.Type) - Method in interface nxopen.motion.TireBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setTitle(String) - Method in interface nxopen.annotations.BalloonNoteBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.BusinessModifier
-
Sets the title
License requirements: geometric_tol ("GDT")
.
- setTitle(String) - Method in interface nxopen.annotations.CompanyProprietaryInformationBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.CustomerValueBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setTitle(String) - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.ExportControlBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.FeatureIdBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setTitle(String) - Method in interface nxopen.annotations.GeneralNoteBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.GovernmentSecurityInformationBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.PartIdentificationBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.PmiIntegerBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.PmiNumberBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.PmiStringBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.PmiUrlNoteBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.PmiUserDefinedBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.ProcessSpecificationBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.RevisionBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setTitle(String) - Method in interface nxopen.annotations.SafetyClassBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setTitle(String) - Method in interface nxopen.annotations.SpecificNoteBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.annotations.UrlBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setTitle(String) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setTitle(String) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setTitle(String) - Method in interface nxopen.drafting.AttributeItemBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setTitle(String) - Method in interface nxopen.issue.IssueContent
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setTitle(String) - Method in interface nxopen.issue.IssueContentBuilder
-
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- setTitle(String) - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setTitle(String) - Method in interface nxopen.routing.RoutePartDescriptor
-
License requirements: routing_base ("Routing Basic")
.
- setTitle(String) - Method in interface nxopen.shipdesign.NavigatorNode
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setTitle(String) - Method in interface nxopen.uistyler.DialogItem
-
Specifies a string to display on the top border of the dialog
License requirements: None.
- setTitleBlockAlignmentPosition(DrawingFormatTitleBuilder.TitleBlockPositionType) - Method in interface nxopen.annotations.DrawingFormatTitleBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTitleVisibility(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setTitleVisibility(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setTlAdjReg(int) - Method in interface nxopen.cam.TrackpointBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTlaxisBladeRollAngle(double) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setTlCoolantThro(boolean) - Method in interface nxopen.cam.DrillToolBuilder
-
License requirements: None.
- setTlCtlgNum(String) - Method in interface nxopen.cam.ToolBuilder
-
License requirements: None.
- setTlCutcomReg(int) - Method in interface nxopen.cam.MillingToolBuilder
-
License requirements: None.
- setTlCutcomReg(int) - Method in interface nxopen.cam.TrackpointBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTlDescription(String) - Method in interface nxopen.cam.ToolBuilder
-
License requirements: None.
- setTlDesignation(String) - Method in interface nxopen.cam.DrillToolBuilder
-
License requirements: None.
- setTlDiameter(double) - Method in interface nxopen.cam.FlowBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTlDirection(MillingToolBuilder.ToolDirectionTypes) - Method in interface nxopen.cam.MillingToolBuilder
-
License requirements: None.
- setTlFormType(DrillThreadMillToolBuilder.ToolFormTypeTypes) - Method in interface nxopen.cam.DrillThreadMillToolBuilder
-
License requirements: None.
- setTlHolderDescription(String) - Method in interface nxopen.cam.MillingToolBuilder
-
License requirements: None.
- setTlHolderLibref(String) - Method in interface nxopen.cam.MillingToolBuilder
-
License requirements: None.
- setTlLibref(String) - Method in interface nxopen.cam.ToolBuilder
-
License requirements: None.
- setTlManualToolChange(boolean) - Method in interface nxopen.cam.ToolBuilder
-
License requirements: None.
- setTlMountingJunction(NXObject) - Method in interface nxopen.cam.SolidToolBuilder
-
License requirements: None.
- setTlTapHolderType(DrillTapToolBuilder.ToolTapHolderTypeTypes) - Method in interface nxopen.cam.DrillTapToolBuilder
-
License requirements: None.
- setTlText(String) - Method in interface nxopen.cam.ToolBuilder
-
License requirements: None.
- setTlThreadFormMethod(DrillTapToolBuilder.ToolThreadFormMethodTypes) - Method in interface nxopen.cam.DrillTapToolBuilder
-
License requirements: None.
- setTnoFile(String) - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setTo(ISurface) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the face or datum plane at which the cutout ends.
- setToBeDeleted(boolean) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setToBeDeleted(boolean) - Method in interface nxopen.weld.WeldFillStripBuilder
-
License requirements: None.
- setToClipboard(boolean) - Method in interface nxopen.gateway.CopyCutBuilder
-
License requirements: None.
- setToCreateStandalonePlot(boolean) - Method in interface nxopen.cae.xyplot.PlotParameters
-
License requirements: None.
- setToCsys(CoordinateSystem) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.
- setToCsys(CoordinateSystem) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setToCSYS(CoordinateSystem) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setToe(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setToe(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setToFunction(Excitation, Excitation.Component) - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder
-
Sets the to function
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setTogBlank(boolean) - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setToggle(boolean) - Method in interface nxopen.cam.MultiDepthCut
-
License requirements: cam_base ("CAM BASE")
.
- setToggleAdditionalObjects(boolean) - Method in interface nxopen.ame.LoadLineDesignerBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleBlankComponentsWithAttribute(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToggleCreateSkipWelds(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setToggleDescription(boolean) - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleDiS(boolean) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setToggleEqualSpacing(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setToggleFunction(boolean) - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleI(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setToggleJ(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setToggleK(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setToggleLabel(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setToggleLevel(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setToggleListDependents(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToggleListDependents(boolean) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToggleLocation(boolean) - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleLongName(boolean) - Method in interface nxopen.mechatronics.GanttExportPLCopenBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setToggleOpenInEplan(boolean) - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleOverwrite(boolean) - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleProduct(boolean) - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleRDS(boolean) - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleRecreateDeletedWelds(boolean) - Method in interface nxopen.weld.FilletBuilder
-
License requirements: ugweld ("UG WELD")
.
- setToggleSaveNameChanges(boolean) - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleSavePathChanges(boolean) - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setToggleShowOnly(boolean) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToggleSide(boolean) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setToggleSideArea(boolean) - Method in interface nxopen.tooling.CalculateAreaBuilder
-
License requirements: None.
- setToggleState(int, UFMb.State) - Method in interface nxopen.uf.UFMb
-
- setToggleStatus(MenuButton.Toggle) - Method in interface nxopen.menubar.MenuButton
-
Sets the toggle status of the button.
- setToggleSymmetricOffset(boolean) - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setToggleSymmetricOffsets(boolean) - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setToggleX(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setToggleY(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setToggleZ(boolean) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setTOIndex(int) - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
License requirements: nx_sinumerik_ca ("Sinumerik Collision Avoidance")
.
- setTolDisplayActDRF(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolDisplayDesDRF(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolDisplayDesPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolDisplayGauge(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolDisplayMeaPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolDisplayNeedles(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolDisplayPoints(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolDisplayReconstruct(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolerance(double) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTolerance(Value) - Method in interface nxopen.annotations.FcfFrame
-
- setTolerance(double) - Method in interface nxopen.annotations.HatchBuilder
-
- setTolerance(double) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTolerance(double) - Method in interface nxopen.annotations.HatchStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTolerance(AngularTolerance) - Method in interface nxopen.annotations.IAngularTolerance
-
Sets the tolerance.
- setTolerance(LinearTolerance) - Method in interface nxopen.annotations.ILinearTolerance
-
Sets the tolerance.
- setTolerance(double) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setTolerance(double) - Method in interface nxopen.cae.NodeProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTolerance(double) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
License requirements: None.
- setTolerance(double) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setTolerance(double) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the value of tolerance, that specifies a chord height tolerance
value for silhouette and hidden line generation in a given
drawing view.
- setTolerance(double) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTolerance(GeneralToleranceOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTolerance(boolean) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTolerance(double) - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTolerance(double) - Method in interface nxopen.facet.MultiPatchAlignmentBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTolerance(double) - Method in interface nxopen.features.BooleanBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.BridgeCurveBuilder
-
- setTolerance(double) - Method in interface nxopen.features.ChamferBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.CompositeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTolerance(double) - Method in interface nxopen.features.DividefaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTolerance(double) - Method in interface nxopen.features.DraftBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.EmbossBuilder
-
Sets the distance tolerance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.ExtensionBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setTolerance(double) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.FillHoleBuilder
-
License requirements: nx_freeform_1 ("basic freeform modeling"), solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.FlowBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.IntersectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.OffsetCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setTolerance(double) - Method in interface nxopen.features.OffsetFacetBodyBuilder
-
License requirements: None.
- setTolerance(double) - Method in interface nxopen.features.OffsetSurfaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.PatchBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTolerance(double) - Method in interface nxopen.features.RevolveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.SewBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTolerance(double) - Method in interface nxopen.features.ShellBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTolerance(double) - Method in interface nxopen.features.shipdesign.MarkingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setTolerance(double) - Method in interface nxopen.features.shipdesign.RoomPanelBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setTolerance(double) - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setTolerance(double) - Method in interface nxopen.features.SplitBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.ThickenBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTolerance(double) - Method in interface nxopen.features.TrimBody2Builder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.TrimExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTolerance(double) - Method in interface nxopen.features.TrimSheetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.features.TubeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTolerance(double) - Method in interface nxopen.geometricutilities.CurveFitData
-
License requirements: None.
- setTolerance(double) - Method in interface nxopen.geometricutilities.RefitControlBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTolerance(double) - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- setTolerance(double) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setTolerance(double) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the value of tolerance that specifies a chord height tolerance
value for silhouette and hidden line generation in a given
drawing view.
- setTolerance(double) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the tolerance.
- setTolerance(double) - Method in interface nxopen.routing.ConnectPathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setTolerance(double) - Method in interface nxopen.SketchOffsetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setTolerance(double) - Method in interface nxopen.SketchProjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setTolerance(AutoDimensionBuilder.ToleranceType) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTolerance(double) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Set the tolerance value.
- setTolerance(double) - Method in interface nxopen.tooling.FaceSplitBuilder
-
License requirements: None.
- setTolerance(float) - Method in interface nxopen.uf.UFDrf
-
- setToleranceAngularFormat(AngularDimensionFormat) - Method in interface nxopen.annotations.UnitsStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceCharacterSize(double) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToleranceCoefficient(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setToleranceColor(NXColor) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToleranceCrosshatch(double) - Method in interface nxopen.annotations.LightweightSectionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setToleranceDecimalPlaces(int) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the number of decimal places for the primary tolerance value of a dimension.
- setToleranceDetail(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToleranceDistance(double) - Method in interface nxopen.cae.FaceFaceImprintBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setToleranceLeadingZero(boolean) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the tolerance leading zero display property
License requirements: None.
- setToleranceLowerValue(double) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToleranceMarkup(boolean) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setToleranceMCMType(SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setToleranceName(String) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToleranceNxTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceOffset(RoughFinishTurningBuilder.ToleranceOffsetTypes) - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToleranceOffsetMode(TurnFeatureGeomBuilder.ToleranceOffsetModes) - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTolerancePercent(double) - Method in interface nxopen.cam.ToolPathDivideBuilder
-
License requirements: None.
- setTolerancePlacement(TolerancePlacement) - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Sets the tolerance text placement relative to the dimension text
License requirements: None.
- setTolerances(double[]) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Set tolerances for mesh type surfaces.
- setTolerances(double[]) - Method in interface nxopen.SurfaceRebuildData
-
Set surface rebubild tolerances.
- setToleranceStandardTextCharacterSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceString(String[]) - Method in interface nxopen.features.MeshSurfaceBuilder
-
Set tolerances strings for mesh type surface.
- setToleranceSummary(boolean) - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToleranceText(Lettering) - Method in interface nxopen.annotations.LetteringPreferences
-
Sets the tolerance text
License requirements: None.
- setToleranceText(String) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setToleranceTextAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextCharSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextColor(NXColor) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextFont(int) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextItalicized(boolean) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextLineSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextLineWidth(LineWidth) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextSpaceFactor(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextSymbolAspectRatio(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setToleranceType(ToleranceType) - Method in interface nxopen.annotations.AngularTolerance
-
Sets the tolerance type
License requirements: None.
- setToleranceType(ToleranceType) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the tolerance display style.
- setToleranceType(ToleranceType) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceType(BaseSurfaceFinishBuilder.ToleranceOption) - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
License requirements: drafting ("DRAFTING")
.
- setToleranceType(ToleranceType) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the tolerance type
License requirements: None.
- setToleranceType(SearchCriteriaDimensionBuilder.ToleranceTypes) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setToleranceType(BaseSurfaceFinishBuilder.ToleranceOption) - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
License requirements: None.
- setToleranceUpperValue(double) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToleranceValue(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setToleranceValue(double) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setToleranceValue(double) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setToleranceValue(double) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToleranceValuePrecision(int) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setToleranceValues(double, double, double, double) - Method in interface nxopen.features.ExtrudeBuilder
-
SET all the tolerances at once
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToleranceValueSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToleranceZoneShape(ToleranceZoneShape) - Method in interface nxopen.annotations.FcfFrame
-
- setTolerancingStandard(UFGdt.Standard) - Method in interface nxopen.uf.UFGdt
-
- setTolerantMachining(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setTolerantPositioning(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the option to allow tolerant (imprecise) geometry selection for assembly positioning
License requirements: None.
- setTolHighlightNominal(boolean) - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolOpType(InspectionToleranceOperationBuilder.TolType) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTolSetting(double) - Method in interface nxopen.tooling.TraverseLoopBuilder
-
License requirements: None.
- setToMarkVisibility(int, String, UFUndo.UserVisibility) - Method in interface nxopen.uf.UFUndo
-
- setTool(DisplayableObject) - Method in interface nxopen.features.BooleanBuilder
-
- setTool(NXObject) - Method in interface nxopen.features.RPODimension
-
License requirements: None.
- setTool(NXObject) - Method in interface nxopen.features.TrimBodyBuilder
-
Sets the tool of the trim body feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTool(boolean, String) - Method in interface nxopen.preferences.PartSheetmetal
-
The tool standard
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setToolAssociativity(AssociativityType) - Method in interface nxopen.features.RPODimension
-
License requirements: None.
- setToolAxis(NXObject) - Method in interface nxopen.cam.HoleBossSet
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxis(NXObject) - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxis(Vector3d) - Method in interface nxopen.cam.PathLinearMotion
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxis(PmopToolAxisCiBuilder.ToolAxisTypes) - Method in interface nxopen.cam.PmopToolAxisCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxis(int) - Method in interface nxopen.cam.ToolAxisCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxis(Direction) - Method in interface nxopen.die.UncutRegionsBuilder
-
License requirements: None.
- setToolAxis(Axis) - Method in interface nxopen.geometricutilities.ExtrudeRevolveToolBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToolAxis(UFVariant, double[]) - Method in interface nxopen.uf.UFDrpos
-
- setToolAxisAsArcAxis(int) - Method in interface nxopen.cam.DrillGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisChange(double) - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- setToolAxisMode(OrientGeomBuilder.ToolAxisModes) - Method in interface nxopen.cam.OrientGeomBuilder
-
Sets the tool axis mode
License requirements: cam_base ("CAM BASE")
.
- setToolAxisSmoothing(int) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisStatus(int) - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisType(int) - Method in interface nxopen.cam.DrillGeomBuilder
-
Sets the Tool Axis type
License requirements: cam_base ("CAM BASE")
.
- setToolAxisType(HoleMakingBuilder.ToolAxisTypes) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisType(ProbeInspectSurfacePointMoveBuilder.ToolAxis) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
License requirements: None.
- setToolAxisType(ToolAxisAdvanced.Type) - Method in interface nxopen.cam.ToolAxisAdvanced
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisType(ToolAxisFixed.Types) - Method in interface nxopen.cam.ToolAxisFixed
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisType(ToolAxisVariable.Types) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisUsage(NcmAvoidancePointBuilder.ToolAxisUsages) - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisVector(NXObject) - Method in interface nxopen.cam.DrillGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisVector(NXObject) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolAxisVector(NXObject) - Method in interface nxopen.cam.OrientGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolbarVis(UFVariant, int) - Method in interface nxopen.uf.UFUi
-
- setToolBody(ScCollector) - Method in interface nxopen.features.EmbossBodyBuilder
-
License requirements: None.
- setToolBody(Body) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToolBody(ScCollector) - Method in interface nxopen.features.SweptVolumeBuilder
-
License requirements: None.
- setToolBodyCollector(ScCollector) - Method in interface nxopen.features.BooleanBuilder
-
License requirements: None.
- setToolCarrierDirectionSelection(String, String, int) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the direction selection for a tool carrier.
- setToolCarrierName(String) - Method in interface nxopen.sim.MachineToolConfiguration
-
License requirements: None.
- setToolCarrierRetraction(String, String, int) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the retraction for a tool carrier.
- setToolCarrierSwivelMode(String, String, int) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the swiveling mode for a tool carrier.
- setToolCarrierXRetractionPosition(String, String, double) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the X retraction position for a tool carrier.
- setToolCarrierYRetractionPosition(String, String, double) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the Y retraction position for a tool carrier.
- setToolCarrierZRetractionPosition(String, String, double) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the Z retraction position for a tool carrier.
- setToolChangesAtSafePlane(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToolCutter(NXObject[]) - Method in interface nxopen.cam.ManageToolPartBuilder
-
Sets the geometry objects for the tool's cutter
License requirements: None.
- setToolDiameter(double) - Method in interface nxopen.cam.StockPerPassBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolDirection(Direction) - Method in interface nxopen.geometricutilities.ExtrudeRevolveToolBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToolDisplayFrequency(int) - Method in interface nxopen.cam.DisplayTool
-
License requirements: cam_base ("CAM BASE")
.
- setToolDisplayFrequency(int) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolDisplayMotion(int, int) - Method in interface nxopen.cam.WorkInstructionBuilder
-
Sets the tool display path event type and index
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setToolDisplayType(DisplayTool.ToolDisplayTypes) - Method in interface nxopen.cam.DisplayTool
-
License requirements: cam_base ("CAM BASE")
.
- setToolDisplayType(OperationDisplayOptionsBuilder.ToolDisplayTypes) - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolDrivePoint(String) - Method in interface nxopen.cam.HoleDrillingBuilder
-
Set the name of the tool drive point
License requirements: cam_base ("CAM BASE")
.
- setToolEmbossDirection(boolean) - Method in interface nxopen.features.EmbossBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToolGroup(InspectionGroup) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToolingNameRule(String) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToolListProgramGroup(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setToolMagazine(NXObject) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setToolMinimumLengthUsage(boolean) - Method in interface nxopen.cam.PlanarOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolMountingJunction(NXObject) - Method in interface nxopen.cam.ManageToolPartBuilder
-
License requirements: None.
- setToolName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToolName(String) - Method in interface nxopen.cam.InspectionSensorBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToolNewPlane(Plane) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setToolOffset(int) - Method in interface nxopen.cam.ProbeCalibrateLengthMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolOffset(int) - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolOffset(int) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setToolOption(SplitProfilePlateBuilder.ToolOptionType) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setToolOption(SplitProfilePlateBuilder.ToolOptionType) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setToolOption(UnsewBuilder.UnsewTool) - Method in interface nxopen.features.UnsewBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToolOption(BooleanToolBuilder.BooleanToolType) - Method in interface nxopen.geometricutilities.BooleanToolBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToolOption(SelectDividingObjectBuilder.ToolType) - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setToolOption(SplitSolidBuilder.ToolObjectOption) - Method in interface nxopen.tooling.SplitSolidBuilder
-
License requirements: None.
- setToolPartOrTargetPart(ClearanceManagementBuilder.Selection) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setToolpathCuttingLength(double) - Method in interface nxopen.cam.Operation
-
Sets toolpath cutting length in Part units (mm or inch)
License requirements: cam_base ("CAM BASE")
.
- setToolpathCuttingTime(double) - Method in interface nxopen.cam.Operation
-
Sets toolpath cutting time in seconds
License requirements: cam_base ("CAM BASE")
.
- setToolpathLength(double) - Method in interface nxopen.cam.Operation
-
Sets toolpath length in Part units (mm or inch)
License requirements: cam_base ("CAM BASE")
.
- setToolpathSmoothing(int) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setToolpathTime(double) - Method in interface nxopen.cam.Operation
-
Sets toolpath time in seconds
License requirements: cam_base ("CAM BASE")
.
- setToolPlane(Plane) - Method in interface nxopen.geometricutilities.FacePlaneToolBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToolPoint(Point3d) - Method in interface nxopen.features.RPODimension
-
License requirements: None.
- setToolPosition(int) - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
License requirements: cam_base ("CAM BASE")
.
- setToolPosition(BoundarySet.ToolPositionTypes) - Method in interface nxopen.cam.BoundarySet
-
License requirements: cam_base ("CAM BASE")
.
- setToolPosition(DPMItpBuilder.ToolPositionOption) - Method in interface nxopen.cam.DmToolPosition
-
- setToolPosition(DPMItpBuilder.ToolPositionOption) - Method in interface nxopen.cam.DPMItpBuilder
-
- setToolPositioningMethod(ToolPositioningBuilder.ToolPositioning) - Method in interface nxopen.cam.ToolPositioningBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolPositionType(DmToolPosition.ToolPositionOption) - Method in interface nxopen.cam.DmToolPosition
-
License requirements: cam_base ("CAM BASE")
.
- setToolRadiusCompensation(boolean) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the 3D Tool Radius Compensation information
License requirements: None.
- setToolRegions(int[]) - Method in interface nxopen.cam.MergeSubopCommand
-
Set the tool regions
License requirements: None.
- setToolReversed(boolean) - Method in interface nxopen.features.TrimExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setToolRunOffType(CutParametersToolRunOffTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setToolSetupSheet(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setToolShape(GougeCheckBuilder.ToolShapeType) - Method in interface nxopen.cam.GougeCheckBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToolSide(BoundarySet.ToolSideTypes) - Method in interface nxopen.cam.BoundarySet
-
License requirements: cam_base ("CAM BASE")
.
- setToolSide(LaserProfileMove.ToolSides) - Method in interface nxopen.cam.LaserProfileMove
-
License requirements: cam_base ("CAM BASE")
.
- setToolString(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToolString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToolTiltMethodType(ToolPathTiltTilting.ToolAxisTypes) - Method in interface nxopen.cam.ToolPathTiltTilting
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.blockstyler.BodyCollector
-
License requirements: None.
- setTooltip(String) - Method in interface nxopen.blockstyler.Button
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.blockstyler.CurveCollector
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.blockstyler.FaceCollector
-
License requirements: None.
- setTooltip(String) - Method in interface nxopen.blockstyler.Label
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.blockstyler.SectionBuilder
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.blockstyler.SelectFacetRegion
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.blockstyler.SelectFeature
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.blockstyler.SelectObject
-
License requirements: None.
- setTooltip(String) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.blockstyler.SuperPoint
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.blockstyler.SuperSection
-
License requirements: None.
- setToolTip(String) - Method in interface nxopen.diagramming.SheetBuilder
-
License requirements: None.
- setTooltipOnRolloverToggle(boolean) - Method in interface nxopen.display.SelPref
-
License requirements: None.
- setToolTipTextHandler(Tree.ToolTipTextCallback) - Method in interface nxopen.blockstyler.Tree
-
Sets the tool tip callback.
- setToolTraceSize(int) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setToolType(AnalyzePocketBuilder.ToolTypes) - Method in interface nxopen.features.AnalyzePocketBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToolType(BlendPocketBuilder.ToolTypes) - Method in interface nxopen.features.BlendPocketBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToolType(int) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setToolVector(Direction) - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setToolVector(Direction) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setTop(IOrientation) - Method in interface nxopen.die.RibChildBuilder
-
Sets the top limit geometry of the die rib.
- setTop(double) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setTopBorder(RenderingPropertiesBuilder) - Method in interface nxopen.diagramming.tables.CellBuilder
-
License requirements: None.
- setTopColor(double[]) - Method in interface nxopen.display.Background
-
Sets the top color
License requirements: None.
- setTopCorner(Point3d) - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setTopDialogItem(String) - Method in interface nxopen.uistyler.Attachment
-
Sets the top dialog item
License requirements: None.
- setTopEnd(IOrientation) - Method in interface nxopen.die.RibChildBuilder
-
Sets the top end limit geometry of the die rib.
- setTopEndByProfile(DirectionOption, IProfile[]) - Method in interface nxopen.die.RibChildBuilder
-
Sets the top end limit geometry of the die rib using a profile.
- setTopExtension(WeldGrooveExtension) - Method in interface nxopen.weld.GrooveBuilder
-
- setTopGeometry(NXObject) - Method in interface nxopen.cam.CutLevel
-
Set the top selected geometry
License requirements: cam_base ("CAM BASE")
.
- setTopHorizontalOffset(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the top horizontal offset of the die rib.
- setTopHorizontalOffset(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the top horizontal offset of die ribs.
- setTopLevel(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setTopLimitOffset(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the top limit offset of the die rib.
- setTopLimitOffset(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the top limit offset of die ribs.
- setTopMargin(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setTopMargin(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setTopOffCriticalDepths(boolean) - Method in interface nxopen.cam.CutLevel
-
License requirements: cam_base ("CAM BASE")
.
- setTopOffCriticalDepths(boolean) - Method in interface nxopen.cam.CutLevelPlanar
-
License requirements: cam_base ("CAM BASE")
.
- setTopOffLevelColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setTopOffset(int) - Method in interface nxopen.uistyler.Attachment
-
Sets the top offset
License requirements: None.
- setToPoint(Point) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setToPoint(Point) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setToPoint(Point) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setToPoint(Point) - Method in interface nxopen.features.MoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToPoint(Point) - Method in interface nxopen.formboard.OrientBranchBuilder
-
- setToPoint(Point) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setToPoint(Point) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTopPartName(String) - Method in interface nxopen.tooling.IntermediateStageBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTopSeamDisplay(boolean) - Method in interface nxopen.annotations.LineWeldData
-
Sets the flag indicating whether the top seam is displayed
License requirements: None.
- setTopSeamObjects(DisplayableObject[]) - Method in interface nxopen.annotations.LineWeldData
-
Sets the top seam objects.
- setTopSeamReverse(boolean) - Method in interface nxopen.annotations.LineWeldData
-
Sets the flag indicating whether the top seam direction is reveresed
License requirements: None.
- setTopSeamView(DraftingView) - Method in interface nxopen.annotations.LineWeldData
-
Sets the view for which top seam is to be created.
- setTopShapeControlMethods(StyledCornerBuilder.ShapeControlMethodsTypes) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTopTrimmedMargin(double) - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
License requirements: None.
- setTopTrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTopUntrimmedMargin(double) - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
License requirements: None.
- setTopUntrimmedMargin(double) - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTopVertex(double, double, double) - Method in interface nxopen.tooldesigner.SelectWeldsBuilder
-
Set Top Vertex for volume search
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setTopVerticalOffset(double) - Method in interface nxopen.die.RibChildBuilder
-
Sets the top vertical offset of the die rib.
- setTopVerticalOffset(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the top vertical offset of die ribs.
- setTopView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTopZc(double) - Method in interface nxopen.cam.CutLevel
-
License requirements: cam_base ("CAM BASE")
.
- setTorqueType(ScalarTorqueBuilder.ScalarTorqueType) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setTorsionalFunction(Function) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setTorsionalMoment(boolean) - Method in interface nxopen.motion.JointFrictionAdams
-
Sets the torsional moment
License requirements: mechanisms ("MECHANISMS")
.
- setTorsionalMoment(boolean) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the torsional moment
License requirements: mechanisms ("MECHANISMS")
.
- setTorsionalType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setToState(OverrideBuilder.ToStates) - Method in interface nxopen.validate.OverrideBuilder
-
License requirements: ug_checkmate ("UG Check Mate")
.
- setToStation(StripLayoutBuilder.ToStationType) - Method in interface nxopen.tooling.StripLayoutBuilder
-
License requirements: None.
- setTotalAlongX(int) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setTotalAlongY(int) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setTotalCollectionCount(ClearanceAnalysisBuilder.NumberOfCollections) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setTotalDynamicNormals(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Sets number of dynamic normals
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setTotalForce(String) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setTotalForceCenter(String) - Method in interface nxopen.tooling.ForceCalculationBuilder
-
License requirements: None.
- setTotalLength(String) - Method in interface nxopen.geometricutilities.CurveLengthData
-
Set total length
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTotalMass(boolean) - Method in interface nxopen.cae.Mesh0dBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTotalNumber(int) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setTotalSearchDirectories(int) - Method in interface nxopen.Catiav5Importer
-
License requirements: None.
- setToTerminal(LogicalTerminal) - Method in interface nxopen.routing.electrical.Connection
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setTouchArea(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setTouchBody(boolean) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- SETTOUNDEFINED - Static variable in class nxopen.cae.SimConditionSeqMgr.ImportMissingConditionsBehavior
-
- setToVector(Direction) - Method in interface nxopen.features.MoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setToVector(Direction) - Method in interface nxopen.formboard.OrientBranchBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setToVector(Direction) - Method in interface nxopen.geometricutilities.ModlMotion
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setToVector(Direction) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrace(SimDebugBuilder.TraceType, boolean) - Method in interface nxopen.sim.SimDebugBuilder
-
Sets the trace
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setTraceExplosionToMaster(boolean) - Method in interface nxopen.uf.UFMotion
-
- setTraceLineCreateGapsLock(boolean) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTraceLineCreateGapsValue(double) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTraceLineHiddenColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTraceLineHiddenFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTraceLineHiddenWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTraceLineVisibleColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTraceLineVisibleFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTraceLineVisibleWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTraceOption(boolean) - Method in interface nxopen.motion.PostProcess
-
Set articulation trace option animation/articulation/spreadsheet run
License requirements: mechanisms ("MECHANISMS")
.
- setTrackingCsys(CoordinateSystem) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setTrackingData(String) - Method in interface nxopen.cam.NcmHoleMachining
-
License requirements: cam_base ("CAM BASE")
.
- setTrackingMode(boolean) - Method in interface nxopen.cae.optimization.TBSEigenvalueOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setTrackingName(String) - Method in interface nxopen.cam.TrackpointBuilder
-
License requirements: None.
- setTrackingPoint(Point) - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
License requirements: None.
- setTrackingPoint(int) - Method in interface nxopen.cam.ToolTrackingPointBuilder
-
Set the Tracking point index
License requirements: None.
- setTrackingPointData(Tag, int, UFCutter.TrackingPointData) - Method in interface nxopen.uf.UFCutter
-
- setTrackingPointStatus(TurningOperationBuilder.TrackingPointType) - Method in interface nxopen.cam.TurningOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTrackingPointStatus(TurnToolProbingBuilder.TrackingPointTypes) - Method in interface nxopen.cam.TurnToolProbingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTrackingPointType(int) - Method in interface nxopen.cam.Cutcom
-
License requirements: cam_base ("CAM BASE")
.
- setTrackingXOff(double) - Method in interface nxopen.cam.SolidTrackingBuilder
-
License requirements: None.
- setTrackingYOff(double) - Method in interface nxopen.cam.SolidTrackingBuilder
-
License requirements: None.
- setTrackingZOff(double) - Method in interface nxopen.cam.SolidTrackingBuilder
-
License requirements: None.
- setTrackLowerLimitHeightTH1(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setTrackLowerLimitLengthTL1(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setTrackSide(TirePropertyTnoBuilder.TrackSideType) - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setTrackUpperLimitHeightTH2(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setTrackUpperLimitLengthTL23(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setTrailingAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced
-
- setTrailingEdgeClearanceAngle(double) - Method in interface nxopen.cam.ToolAxisAdvanced
-
License requirements: cam_base ("CAM BASE")
.
- setTransfer2dComponentAnnotation(boolean) - Method in interface nxopen.layout2d.AssemblyCreationSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTransferAnnotation(boolean) - Method in interface nxopen.drawings.BaseViewStyle
-
The status of transfer annotation controls whether or not annotations created in
a model view are transferred to the drawing when a view is imported.
- setTransferAnnotation(boolean) - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTransferAnnotation(boolean) - Method in interface nxopen.preferences.BaseViewPreferences
-
The status of transfer annotation controls whether or not annotations created in
a model view are transferred to the drawing when a view is imported.
- setTransferBetweenLevelsType(NcmPlanarBuilder.TransferBetweenLevelsTypes) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTransferBetweenRegionsType(NcmPlanarBuilder.TransferBetweenRegionsTypes) - Method in interface nxopen.cam.NcmPlanarBuilder
-
- setTransferHeight(double) - Method in interface nxopen.cam.ToolPathSplitBuilder
-
License requirements: None.
- setTransferHeight(double) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
License requirements: None.
- setTransferMaxToolAxisChange(double) - Method in interface nxopen.cam.NcmSmoothingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTransferMethod(PlungeMillingBuilder.TransferMethodTypes) - Method in interface nxopen.cam.PlungeMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTransferTolerance(double) - Method in interface nxopen.cam.NcmSmoothingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTransferToleranceSource(NcmSmoothingBuilder.SmoothToleranceSources) - Method in interface nxopen.cam.NcmSmoothingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTransferTopLevelSketchAnnotation(boolean) - Method in interface nxopen.layout2d.AssemblyCreationSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTransferType(ToolPathSplitBuilder.TransferTypes) - Method in interface nxopen.cam.ToolPathSplitBuilder
-
License requirements: None.
- setTransferType(ToolPathSplitParametersBuilder.TransferTypes) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
License requirements: None.
- setTransferUsingMethod(ToolPathSplitBuilder.TransferUsingMethods) - Method in interface nxopen.cam.ToolPathSplitBuilder
-
License requirements: None.
- setTransferUsingMethod(ToolPathSplitParametersBuilder.TransferUsingMethods) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
License requirements: None.
- setTransferWithinLevelsType(NcmPlanarBuilder.TransferWithinLevelsTypes) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTransferWithinLevelsWith(NcmPlanarBuilder.TransferWithinLevelsWiths) - Method in interface nxopen.cam.NcmPlanarBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTransform(Matrix3x3, Vector3d) - Method in interface nxopen.layout2d.Component
-
Sets the absolute transform on a component, given a rotation matrix and a translation vector
License requirements: nx_layout ("NX Layout")
.
- setTransformationMethod(SubdivisionExtrudeCageBuilder.TransformationMethodType) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Sets the transformation method.
- setTransformationMethod(TransformCageData.TransformationMethodType) - Method in interface nxopen.features.subdivision.TransformCageData
-
Sets the transformation method.
- setTransformationObject(TransformerData.ObjectType) - Method in interface nxopen.geometricutilities.TransformerData
-
Sets a component of the tool using which transformation is started.
- setTransformCircles(boolean) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setTransformComponents(FlatSolidBuilder.TransformComponentsOption) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setTransformCurvesContinuity(FtmTransformCurvesBuilder.TransformCurvesContinuityType) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
License requirements: None.
- setTransformEndPoint(Point) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilder
-
License requirements: None.
- setTransformerToObject(CageManipulatorData.ObjectSelectionData) - Method in interface nxopen.features.subdivision.CageManipulatorData
-
- setTransformerToObject(CageManipulatorData.ObjectSelectionData) - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
- setTransformFactor(double) - Method in interface nxopen.features.MeshTransformerBuilder
-
License requirements: None.
- setTransformMatrix(Matrix3x3) - Method in interface nxopen.die.QuickBinderBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTransformMethod(PedestrianProtectionBuilder.TransformMethods) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setTransformOrigin(Point3d) - Method in interface nxopen.die.QuickBinderBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTransformRestrictionAreas(boolean) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB")
.
- setTransformStartPoint(Point) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilder
-
License requirements: None.
- setTransformToAbsoluteCsys(boolean) - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Sets the flag which decides if the flattened solid will be transformed to Absolute CSYS.
- setTransformToAbsoluteCsys(boolean) - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Sets the flag which decides if the flattened solid will be transformed to Absolute CSYS.
- setTransformType(InspectionOperationTransformBuilder.Transform) - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTransformType(OperationTransformBuilder.Transform) - Method in interface nxopen.cam.OperationTransformBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTransFrameEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setTransientPartPersistencePolicy(Session.TransientPartPolicy) - Method in interface nxopen.Session
-
Sets the persistence policy for transient parts in the session
License requirements: None.
- setTransition(int) - Method in interface nxopen.cae.LocalRemeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTransition(StudioSurfaceBuilder.TransitionOptions) - Method in interface nxopen.features.StudioSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setTransition(StudioSurfaceBuilderEx.TransitionOptions) - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
License requirements: nx_freeform_1 ("basic freeform modeling") OR features_modeling ("FEATURES MODELING")
.
- setTransition(TransitionLawNodeBuilder.TransitionType) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilder
-
Sets the transition type
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setTransitionDefinition(DrawBeadBuilder.TransitionDefinitionTypes) - Method in interface nxopen.die.DrawBeadBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTransitionGeometry(int, DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Sets the transition geometry given the index.
- setTransitionLinkFlag(boolean) - Method in interface nxopen.geometricutilities.ConicCrossSection
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTransitionMethod(LocalOffsetBuilder.TransitionMethodType) - Method in interface nxopen.facet.LocalOffsetBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setTransitionMethod(TransitionBuilder.TransitionMethods) - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setTransitionOption(StyledSweepBuilder.TransitionOptions) - Method in interface nxopen.features.StyledSweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setTransitionOptions(GlobalShapingBuilder.TransitionType) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTransitionsBetweenPaths(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTransitionShapeControl(double) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTransitionSurfType(MWDesignPartingSurfaceBuilder.TransitionSurfaceType) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setTransitionsWithinPaths(boolean) - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTransitionType(IFormBuilder.TransitionTypes) - Method in interface nxopen.features.IFormBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTransitionType(TransitionBuilder.TransitionTypes) - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setTransitionType(PathTransitionBuilder.Type) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setTransitionType(SegmentBuilder.StraightTransitionTypeChoices) - Method in interface nxopen.motion.SegmentBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setTranslateCsys(CoordinateSystem) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTranslateCsys(CoordinateSystem) - Method in interface nxopen.weld.TransformBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTranslateCsys(CoordinateSystem) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the coordinate system that a point is to be translated about.
- setTranslateUnselectedLayer(boolean) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setTranslateVector(Direction) - Method in interface nxopen.motion.LinkInitialVelocity
-
License requirements: mechanisms ("MECHANISMS")
.
- setTranslateXDistance(String) - Method in interface nxopen.weld.WeldPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTranslateYDistance(String) - Method in interface nxopen.weld.WeldPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTranslateZDistance(String) - Method in interface nxopen.weld.WeldPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTranslationalComponentEndA(DamperEADBuilder.TranslationalComponentEnd) - Method in interface nxopen.cae.DamperEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTranslationalComponentEndA(SpringEADBuilder.TranslationalComponentEnd) - Method in interface nxopen.cae.SpringEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTranslationalComponentEndB(DamperEADBuilder.TranslationalComponentEnd) - Method in interface nxopen.cae.DamperEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTranslationalComponentEndB(SpringEADBuilder.TranslationalComponentEnd) - Method in interface nxopen.cae.SpringEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTranslationAllowed(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the options of allowing rotation.
- setTranslationAmount(int) - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setTranslationArbitraryPlane(Plane) - Method in interface nxopen.features.StudioXformBuilder
-
- setTranslationArbitraryVector(Direction) - Method in interface nxopen.features.StudioXformBuilder
-
- setTranslationDirection(StudioXformBuilder.TranslationDirectionType) - Method in interface nxopen.features.StudioXformBuilder
-
- setTranslationVector(Direction) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTranslationX(double) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setTranslationY(double) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setTranslationZ(double) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setTranslucency(int) - Method in interface nxopen.assemblies.ProductOutlineBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setTranslucency(int) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the BC display translucency factor
this option specifies the translucency of the BC display symbol.
- setTranslucency(int) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setTranslucency(int) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setTranslucency(int) - Method in interface nxopen.mechatronics.DisplayChangerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setTranslucency(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flag indicating whether to display solids in shaded member views with translucency.
- setTranslucency(int) - Method in interface nxopen.preferences.PartObject
-
Sets the translucency value
License requirements: None.
- setTranslucency(boolean) - Method in interface nxopen.preferences.SessionVisualizationVisual
-
Sets the translucency flag.
- setTranslucency(int) - Method in interface nxopen.tooling.ManufacturingGeometryBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setTranslucency(Tag, int) - Method in interface nxopen.uf.UFObj
-
- setTranslucencyAsBoundaryFacesToggle(boolean) - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
License requirements: None.
- setTranslucencyInsideNegative(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setTranslucencyInsidePositive(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setTranslucencyOption(MWDefineRegionsBuilder.TranslucencyOptionType) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
License requirements: None.
- setTranslucencyOutsideNegative(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setTranslucencyOutsidePositive(int) - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setTranslucencyValue(int) - Method in interface nxopen.cam.SimulationOptionsBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setTranslucencyValueScale(int) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
License requirements: None.
- setTranslucentPlanes(boolean) - Method in interface nxopen.preferences.ViewSection
-
License requirements: None.
- setTransmission(String) - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setTransmission(HumanPosturePredictionBuilder.TransmissionType) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setTransparencyColor(double[]) - Method in interface nxopen.display.DecalBuilder
-
Sets the transparency color
License requirements: None.
- setTransparencyColorOption(ImageBaseBuilder.TransparencyColorFrom) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setTransparencyTolerance(int) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setTransparentPixelColor(double[]) - Method in interface nxopen.display.ImageBaseBuilder
-
Sets the transparency color (RGB value) of the image.
- setTransveralInsertArea(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransversalInsertAreaTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFrames(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesExtendBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesExtendColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesExtendFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesExtendFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesExtendLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesExtendWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesLabelName(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesSkipLabelBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesSkipLabelFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesSkipTicBegin(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesSkipTicFrequency(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTransverseFramesTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setTraversal(NXColor) - Method in interface nxopen.cam.PathDisplayColors
-
License requirements: cam_base ("CAM BASE")
.
- setTraversalSettings(Tag, UFPlist.TraversalSettings) - Method in interface nxopen.uf.UFPlist
-
- setTraverseEdges(NXObject[]) - Method in interface nxopen.tooling.TrimRegionBuilder
-
Sets the edges from traverse loop to builder data.
- setTraverseInteriorEdges(boolean) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setTraverseInteriorEdges(boolean) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setTraverseInteriorEdges(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTraverseInteriorEdges(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setTraverseOpenPasses(CutParametersTraverseOpenPassesTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setTraversePostCommands(TaggedObject) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTraverseStartEndPoint(NXObject, Point3d, NXObject[]) - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Set start and end points for traversal.
- setTraverseType(NcmTransferBuilder.TraverseTypes) - Method in interface nxopen.cam.NcmTransferBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTreatAsRigid(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setTreatment(HoleTreatmentBuilder.TreatmentType) - Method in interface nxopen.features.sheetmetal.HoleTreatmentBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setTreatmentType(ClosedCornerBuilder.TreatmentTypeOptions) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setTreatmentType(CornerTreatmentBuilder.CornerTreatmentType) - Method in interface nxopen.features.sheetmetal.CornerTreatmentBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setTreatmentType(ThreeBendCornerBuilder.TreatmentTypeOptions) - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Sets the corner treatment type.
- setTreatOneDegreeBsplineAsPolyline(boolean) - Method in interface nxopen.preferences.SessionModeling
-
License requirements: None.
- setTreatWarningAsFail(boolean) - Method in interface nxopen.validate.ValidatorOptions
-
License requirements: None.
- setTreeSelectedIndex(int[]) - Method in interface nxopen.features.ConcaveFacesBuilder
-
Set face indexes in tree list.
- setTreeWidth(int) - Method in interface nxopen.blockstyler.Explorer
-
License requirements: None.
- setTriadLocation(PartVisualizationScreen.ViewTriadLocation) - Method in interface nxopen.preferences.PartVisualizationScreen
-
Sets the view triad location
License requirements: None.
- setTriadLocation(SessionVisualizationScreen.ViewTriadLocation) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
- setTriadVisibility(boolean) - Method in interface nxopen.preferences.PartVisualizationScreen
-
Sets the show view triad flag.
- setTriadVisibility(int) - Method in interface nxopen.preferences.SessionVisualizationScreen
-
- setTriadVisibility(boolean) - Method in interface nxopen.View
-
Sets the visibility of the view triad in the view.
- setTriangleBase(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTriangleDisplay(boolean) - Method in interface nxopen.STLCreator
-
License requirements: None.
- setTriangleHeight(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTriangleMethod(WeldBeadSizeBuilder.TriangleMethodType) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTriangleTolerance(double) - Method in interface nxopen.cam.PreprocessGeometryBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTriangleType(WeldBeadSizeBuilder.TriangleTypes) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTrim(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
- setTrim(boolean) - Method in interface nxopen.features.FlowBlendBuilder
-
- setTrim(boolean) - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
License requirements: None.
- setTrimAndExtendFromRegion(MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setTrimAndSewMethod(StyledCornerBuilder.TrimAndSewMethodTypes) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTrimBaseFaces(boolean) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setTrimBoundingObjects(boolean) - Method in interface nxopen.features.TrimCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTrimBounds(DirectionOption, IProfile[]) - Method in interface nxopen.die.TrimTaskBuilder
-
Sets the trim bounds of the trim task.
- setTrimClearanceMethod(ToolPathEditorBuilder.ClearanceMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setTrimClearancePlane(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setTrimColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setTrimConnectionMethod(ToolPathEditorBuilder.ConnectionMethodType) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setTrimControl(CutParametersTrimControlTypes) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setTrimCurve1Type(StyledCornerBuilder.TrimCurveTypes) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTrimCurve2Type(StyledCornerBuilder.TrimCurveTypes) - Method in interface nxopen.features.StyledCornerBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTrimCurveCreateType(OutputCurvesBuilder.TrimCurveCreateTypes) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the trim curve creation type
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrimCurveType(OutputCurvesBuilder.TrimCurveTypes) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the trim curve type.
- setTrimDataDetails(NXObject, NXObject, String, String) - Method in interface nxopen.tooling.DesignTrimToolBuilder
-
Set details of the trim data.
- setTrimDataDetails(int, NXObject[], NXObject[]) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Set details of the trim data.
- setTrimDataDetails(int, int, NXObject[], NXObject[]) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
Set details of the trim data.
- setTrimDimensionLineStyle(TrimDimensionLineStyle) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the trim dimension line style
License requirements: None.
- setTrimDimLine(TrimDimensionLineStyle) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTrimDirection(Axis) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setTrimDirection(Direction) - Method in interface nxopen.die.DieAssistantTrimProfile
-
License requirements: None.
- setTrimDirection(Vector3d) - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setTrimDirection(TrimBodyBuilder.DirectionType) - Method in interface nxopen.features.TrimBodyBuilder
-
Sets the trim direction of the trim body feature
License requirements: None.
- setTrimDirection(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrimDirection(boolean) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
License requirements: None.
- setTrimDirection(boolean) - Method in interface nxopen.tooling.TrimSolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTrimEdgeOffset(double) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTrimetricView(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTrimGeometry(ToolPathEditorBuilder.TrimGeometryType) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setTrimInputCurves(boolean) - Method in interface nxopen.SketchChamferBuilder
-
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setTrimInputFaces(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setTrimInputFacesToBlendFaces(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimInputFacesToExtendedRail(boolean) - Method in interface nxopen.features.FlowBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimLine(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setTrimlinePoint(Point) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setTrimLongInputFacesToExtendedRail(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimMethod(AOCSBuilder.Trim) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTrimMethod(OffsetCurveBuilder.TrimOption) - Method in interface nxopen.features.OffsetCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setTrimMethod(StyledBlendBuilder.StyledBlendTrimMethodType) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setTrimmingColor(NXColor) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimmingDirection(Direction) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrimmingMarkColor(NXColor) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setTrimmingMarkColor(NXColor) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTrimmingMarkLength(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setTrimmingMarkLength(double) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setTrimmingMarkLength(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setTrimmingMarkLength(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTrimmingMarkStyle(TrimmingMarkStyleType) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setTrimmingMarkStyle(TrimmingMarkStyleType) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTrimmingMarkThickness(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setTrimmingMarkThickness(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setTrimmingMarkWidth(double) - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
License requirements: None.
- setTrimmingMarkWidth(double) - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTrimmingOption(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimmingOption(FaceBlendBuilder.TrimmingMethod) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimmingOption(MidSurfaceByFacePairsBuilder.TrimmingOptionType) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimmingSteepAngle(double) - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setTrimNewDieFace(boolean) - Method in interface nxopen.die.PierceTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrimNewDieFace(boolean) - Method in interface nxopen.die.TrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrimNewDieFace(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrimNum(ScrapDesignBuilder.TrimNumType) - Method in interface nxopen.tooling.ScrapDesignBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimObject(FacePlaneSelectionBuilder.TrimObjectType) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimOption(boolean) - Method in interface nxopen.features.EmbossBodyBuilder
-
License requirements: None.
- setTrimOrExtendToBend(boolean) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setTrimOutputCurveType(OutputCurvesBuilder.TrimOutputCurveTypes) - Method in interface nxopen.die.OutputCurvesBuilder
-
Sets the trim curve output type
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrimPart(EjectorPostProcessingBuilder.TrimPartName) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
License requirements: None.
- setTrimPart(TrimMoldComponentsBuilder.TrimPartName) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
License requirements: None.
- setTrimPlane(NXObject) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setTrimProfileDirection(DirectionOption) - Method in interface nxopen.die.DieAssistantTrimProfile
-
License requirements: None.
- setTrimSheetType(MachineReliefBuilder.TrimSheetTypes) - Method in interface nxopen.die.MachineReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setTrimSide(ToolPathEditorBuilder.TrimSideType) - Method in interface nxopen.cam.ToolPathEditorBuilder
-
License requirements: None.
- setTrimSide(boolean) - Method in interface nxopen.die.DieAssistantTrimProfile
-
License requirements: None.
- setTrimSideTags(Direction[]) - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Set the vector tags of joined trimming curve trim sides.
- setTrimSurface(EjectorPostProcessingBuilder.TrimSufaceName) - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
License requirements: None.
- setTrimSurface(TrimMoldComponentsBuilder.TrimSurfaceName) - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
License requirements: None.
- setTrimToBoundary(boolean) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setTrimToFaceEdgesOption(boolean) - Method in interface nxopen.features.AOCSBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setTrimToFaceEdgesOption(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Sets the trim option for curve option.
- setTrimTolerance(double) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrimToParentDuct(boolean) - Method in interface nxopen.routing.WindCatcherBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setTrimType(PlateBoundaryOptionBuilder.TrimTypes) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setTrimType(Extend.ExtendType) - Method in interface nxopen.geometricutilities.Extend
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimType(SketchAssociativeTrimBuilder.TrimOption) - Method in interface nxopen.SketchAssociativeTrimBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTrimWallAngleScale(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setTrimWallAttributes(String, String, int) - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Sets the steelinsert trim wall faces attributes
License requirements: ug_die_design ("Die Design")
.
- setTrimWithGuideLines(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setTrueHiddenLine(boolean) - Method in interface nxopen.drawings.ViewStyleThreadsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTrueLengthText(String) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the flag indicating true-length text for the dimension
License requirements: None.
- setTrueLengthText(String) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Sets the true length dimension text
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setTrueLengthTextPosition(TrueLengthTextPosition) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the True Length Text Position
License requirements: None.
- setTrueLengthTextPosition(TrueLengthTextPosition) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting") OR drafting ("DRAFTING")
.
- setTrueShapeData(boolean) - Method in interface nxopen.SaveOptions
-
Sets the option indicating whether to generate data for true shape
filtering (.ts files)
License requirements: None.
- setTrueShapeFiltering(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the true shape filtering option
License requirements: None.
- setTrueShapeRefinement(boolean) - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setTrueShapeRefinement(boolean) - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setTrueShapeRefinement(boolean) - Method in interface nxopen.assemblies.ProximitySearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setTrueShapeRefinement(boolean) - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setTrueSurfaceDisplay(ViewVisualizationVisual.TrueSurfaceDisplayPref) - Method in interface nxopen.preferences.ViewVisualizationVisual
-
- setTubeDiameter(double) - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
License requirements: ugweld ("UG WELD")
.
- setTurnDirection(InspectionMethodBuilder.ScanHelixTurnDirectionTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTurnDirection(InspectionMethodBuilder.ScanHelixTurnDirectionTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTurnDirection(HelixBuilder.TurnDirections) - Method in interface nxopen.features.HelixBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTurnDisplCollTog(int) - Method in interface nxopen.cam.TurnMethodBuilder
-
Set the display collisions value
License requirements: None.
- setTurnInputMode(ToolAxisInterpolate.TurnInputModeTypes) - Method in interface nxopen.cam.ToolAxisInterpolate
-
License requirements: cam_base ("CAM BASE")
.
- setTurnInterpolationMethod(ToolAxisInterpolate.TurnInterpolationMethodTypes) - Method in interface nxopen.cam.ToolAxisInterpolate
-
License requirements: cam_base ("CAM BASE")
.
- setTurnOffHighlighting(boolean) - Method in interface nxopen.PartCleanup
-
Sets the option that specifies whether to turn off highlighting for
all displayable objects in the displayed part.
- setTurnTrackingPointData(Tag, int, UFCutter.TurnTrackingPointData) - Method in interface nxopen.uf.UFCutter
-
- setTurnType(InspectionMethodBuilder.ScanHelixTurnTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTurnType(InspectionMethodBuilder.ScanHelixTurnTypes) - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTurret(NXObject) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setTurretPocketNumber(int) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setTwiHighCycleCutoff(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setTwiHighCycleSlopeChange(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setTwiLowCycleStressCutoff(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setTwiLowCycleStressExtension(double) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setTwin(boolean) - Method in interface nxopen.features.sheetmetal.AeroJoggleBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setTwistAngle(double) - Method in interface nxopen.routing.Stock
-
Sets the twist angle applied to the profile.
- setTwistAngleReverseDirection(boolean) - Method in interface nxopen.features.GlobalShapingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTwistOrigin(Point) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTwistPoint(Point) - Method in interface nxopen.routing.RouteSweptTwistBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setTwistRateAcceptableColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setTwistRateFailureColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setTwistRateFailureLimit(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setTwistRateWarningColor(NXColor) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setTwistRateWarningLimit(double) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setTwoDiagonalPoints(Point3d, Point3d) - Method in interface nxopen.features.BlockFeatureBuilder
-
Create a block by setting two diagonal points, one at the block origin and one at the opposite corner point.
- setTwoDPlanningView(boolean) - Method in interface nxopen.linedesigner.PlanViewManager
-
To set/unset 2D planning view
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setTwoLineToleranceTextSize(double) - Method in interface nxopen.annotations.LetteringStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setTwoPoints(Point, Point, DatumAxisBuilder.UseArcLength) - Method in interface nxopen.features.DatumAxisBuilder
-
Sets two points
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setTwoPointsAndHeight(Point3d, Point3d, String) - Method in interface nxopen.features.BlockFeatureBuilder
-
Create a block by setting the block height and two diagonal points in the WCS x-y plane.
- setTwoSidedLight(boolean) - Method in interface nxopen.drawings.ShadingViewStyle
-
Sets the two sided light toggle data.
- setTwoSidedLight(boolean) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTwoSidedLight(boolean) - Method in interface nxopen.preferences.ShadingViewPreferences
-
Sets the two sided light toggle data.
- setTwoSidedLight(boolean) - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Sets the two sided light flag.
- setTx(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTxIntpDataType(Tag, UFScop.TxIntpDataType) - Method in interface nxopen.uf.UFScop
-
- setTxIntpMethod(Tag, UFScop.TxIntpMethod) - Method in interface nxopen.uf.UFScop
-
- setTxIntpVectorData(Tag, int, UFScop.VectorData) - Method in interface nxopen.uf.UFScop
-
- setTxLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTxUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTy(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTyLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setType(EditClauseBuilder.Types) - Method in interface nxopen.ame.EditClauseBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setType(PageBuilder.Types) - Method in interface nxopen.ame.FragmentBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setType(PageBuilder.Types) - Method in interface nxopen.ame.PageBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setType(SymbolAuthoringBuilder.Types) - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setType(BaseOrdinateDimensionBuilder.Types) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setType(Centerline2dBuilder.Types) - Method in interface nxopen.annotations.Centerline2dBuilder
-
License requirements: drafting ("DRAFTING")
.
- setType(CircleCenterlineBuilder.Types) - Method in interface nxopen.annotations.CircleCenterlineBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setType(DatumTargetBuilder.Types) - Method in interface nxopen.annotations.DatumTargetBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setType(IdSymbolBuilder.SymbolTypes) - Method in interface nxopen.annotations.IdSymbolBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setType(RegionBuilder.Types) - Method in interface nxopen.annotations.RegionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setType(SymmetricalCenterlineBuilder.Types) - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setType(CAEConnectionBuilder.ConnectionTypeEnum) - Method in interface nxopen.cae.CAEConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setType(DurSpecialistLocalDefinitionByGroupBuilder.LocalDefinitionType) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionByGroupBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setType(EdgeSticherBuilder.Types) - Method in interface nxopen.cae.EdgeSticherBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setType(ElementConnectivityBuilder.Types) - Method in interface nxopen.cae.ElementConnectivityBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setType(ElementSplitBuilder.Types) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setType(MMCCreateBuilder.Types) - Method in interface nxopen.cae.MMCCreateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setType(NodesBetweenNodesBuilder.TypeEnum) - Method in interface nxopen.cae.NodesBetweenNodesBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setType(PolygonFaceOnMeshBuilder.PolygonFaceOnMeshType) - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setType(SweepBetweenMeshBuilder.Types) - Method in interface nxopen.cae.SweepBetweenMeshBuilder
-
- setType(BladeFinishGeom.Types) - Method in interface nxopen.cam.BladeFinishGeom
-
License requirements: cam_base ("CAM BASE")
.
- setType(BladeStartPoint.Types) - Method in interface nxopen.cam.BladeStartPoint
-
License requirements: None.
- setType(BoundaryTurnMemberCorner.CornerType) - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
License requirements: cam_base ("CAM BASE")
.
- setType(BoundaryTurnMemberFineFinishCorner.ValueType) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
License requirements: cam_base ("CAM BASE")
.
- setType(BoundaryTurnMemberFineFinishOffset.TypeValue) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset
-
License requirements: cam_base ("CAM BASE")
.
- setType(ChipControl.Types) - Method in interface nxopen.cam.ChipControl
-
License requirements: cam_base ("CAM BASE")
.
- setType(CutAngle.Types) - Method in interface nxopen.cam.CutAngle
-
License requirements: cam_base ("CAM BASE")
.
- setType(CutBand.Types) - Method in interface nxopen.cam.CutBand
-
License requirements: None.
- setType(Cutcom.Types) - Method in interface nxopen.cam.Cutcom
-
License requirements: cam_base ("CAM BASE")
.
- setType(CutDirection.Types) - Method in interface nxopen.cam.CutDirection
-
License requirements: cam_base ("CAM BASE")
.
- setType(CutDwell.Types) - Method in interface nxopen.cam.CutDwell
-
License requirements: cam_base ("CAM BASE")
.
- setType(CutStrategy.Types) - Method in interface nxopen.cam.CutStrategy
-
License requirements: cam_base ("CAM BASE")
.
- setType(DimensionRule.Types) - Method in interface nxopen.cam.DimensionRule
-
License requirements: cam_base ("CAM BASE")
.
- setType(FacesSequence.Types) - Method in interface nxopen.cam.FacesSequence
-
License requirements: cam_base ("CAM BASE")
.
- setType(FeatureProcessBuilder.FeatureProcessType) - Method in interface nxopen.cam.FeatureProcessBuilder
-
License requirements: ug_holemaking ("UG Holemaking")
.
- setType(FinishDwell.Types) - Method in interface nxopen.cam.FinishDwell
-
License requirements: cam_base ("CAM BASE")
.
- setType(LevelToLevel.Types) - Method in interface nxopen.cam.LevelToLevel
-
License requirements: cam_base ("CAM BASE")
.
- setType(MaxCutTraverse.Types) - Method in interface nxopen.cam.MaxCutTraverse
-
License requirements: cam_base ("CAM BASE")
.
- setType(NcmTransfer.TransferTypes) - Method in interface nxopen.cam.NcmTransfer
-
License requirements: cam_base ("CAM BASE")
.
- setType(ProfileStrategy.Types) - Method in interface nxopen.cam.ProfileStrategy
-
License requirements: cam_base ("CAM BASE")
.
- setType(RampingMode.Types) - Method in interface nxopen.cam.RampingMode
-
License requirements: cam_base ("CAM BASE")
.
- setType(ReliefPlunge.Types) - Method in interface nxopen.cam.ReliefPlunge
-
License requirements: cam_base ("CAM BASE")
.
- setType(Sequence.Types) - Method in interface nxopen.cam.Sequence
-
License requirements: None.
- setType(SplitSubopCommand.Types) - Method in interface nxopen.cam.SplitSubopCommand
-
License requirements: None.
- setType(SpringPasses.Types) - Method in interface nxopen.cam.SpringPasses
-
License requirements: cam_base ("CAM BASE")
.
- setType(SteepContainment.Types) - Method in interface nxopen.cam.SteepContainment
-
License requirements: cam_base ("CAM BASE")
.
- setType(StopPosition.Types) - Method in interface nxopen.cam.StopPosition
-
License requirements: cam_base ("CAM BASE")
.
- setType(ToolAxisTilt.Types) - Method in interface nxopen.cam.ToolAxisTilt
-
License requirements: cam_base ("CAM BASE")
.
- setType(TurnConcaveCornerControl.Types) - Method in interface nxopen.cam.TurnConcaveCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setType(TurnCornerControl.Types) - Method in interface nxopen.cam.TurnCornerControl
-
License requirements: cam_base ("CAM BASE")
.
- setType(TurnDirection.Types) - Method in interface nxopen.cam.TurnDirection
-
License requirements: cam_base ("CAM BASE")
.
- setType(TurnOverlap.Types) - Method in interface nxopen.cam.TurnOverlap
-
License requirements: cam_base ("CAM BASE")
.
- setType(ClampingSlotBuilder.Types) - Method in interface nxopen.die.ClampingSlotBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setType(ClearanceBuilder.Types) - Method in interface nxopen.die.ClearanceBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setType(CompensateRoughDataBuilder.Types) - Method in interface nxopen.die.CompensateRoughDataBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(FillAreaBuilder.Types) - Method in interface nxopen.die.FillAreaBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setType(FingerClearanceNotchBuilder.Types) - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setType(HandlingCoreBuilder.Types) - Method in interface nxopen.die.HandlingCoreBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setType(HeelpostBuilder.Types) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setType(KeywayBuilder.Types) - Method in interface nxopen.die.KeywayBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setType(MachineReliefBuilder.Types) - Method in interface nxopen.die.MachineReliefBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setType(QuickBinderBuilder.Types) - Method in interface nxopen.die.QuickBinderBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(QuickBinderWrapBuilder.Types) - Method in interface nxopen.die.QuickBinderWrapBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setType(ThroatParentBuilder.TypeOption) - Method in interface nxopen.die.ThroatParentBuilder
-
Sets the type of throat sections.
- setType(CameraBuilder.Types) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setType(DynamicSectionTypes.Type) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setType(DetailViewBuilder.Types) - Method in interface nxopen.drawings.DetailViewBuilder
-
License requirements: drafting ("DRAFTING")
.
- setType(SectionLineBuilder.Types) - Method in interface nxopen.drawings.SectionLineBuilder
-
- setType(SectionLineSegmentBuilder.Types) - Method in interface nxopen.drawings.SectionLineSegmentBuilder
-
License requirements: drafting ("DRAFTING")
.
- setType(ViewCopyTo3dBuilder.Types) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setType(ViewProjectionBuilder.Types) - Method in interface nxopen.drawings.ViewProjectionBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setType(CreateTransitionBuilder.Types) - Method in interface nxopen.facet.CreateTransitionBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setType(DivideFacetFaceBuilder.DivideFacetTypes) - Method in interface nxopen.facet.DivideFacetFaceBuilder
-
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- setType(ExtrudeFacetBodyBuilder.LimitType) - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.
- setType(FillHoleBuilder.Types) - Method in interface nxopen.facet.FillHoleBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setType(SnipFacetBodyBuilder.Types) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setType(AssociativeArcBuilder.Types) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(BlockFeatureBuilder.Types) - Method in interface nxopen.features.BlockFeatureBuilder
-
License requirements: None.
- setType(ConeBuilder.Types) - Method in interface nxopen.features.ConeBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(CylinderBuilder.Types) - Method in interface nxopen.features.CylinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(DatumAxisBuilder.Types) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setType(DeleteFaceBuilder.SelectTypes) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(DivideCurveBuilder.Types) - Method in interface nxopen.features.DivideCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setType(DraftBodyBuilder.Types) - Method in interface nxopen.features.DraftBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(ExtensionBuilder.Types) - Method in interface nxopen.features.ExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setType(ExtractFaceBuilder.ExtractType) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(FitCurveBuilder.Types) - Method in interface nxopen.features.FitCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(FitSurfaceBuilder.Types) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setType(FlatteningAndFormingBuilder.Types) - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setType(FlatteningAndFormingBuilderEx.Types) - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setType(GeneralConicBuilder.Types) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setType(GeomcopyBuilder.TransformTypes) - Method in interface nxopen.features.GeomcopyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(GuidedExtensionBuilderEx.Types) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(HelixBuilder.Types) - Method in interface nxopen.features.HelixBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(HolePackageBuilder.Types) - Method in interface nxopen.features.HolePackageBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(LawExtensionBuilder.Types) - Method in interface nxopen.features.LawExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setType(LawExtensionBuilderEx.Types) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setType(MatchEdgeBuilder.Types) - Method in interface nxopen.features.MatchEdgeBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setType(MatchedReferenceBuilder.Types) - Method in interface nxopen.features.MatchedReferenceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(MoveFaceBuilder.Types) - Method in interface nxopen.features.MoveFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(NSidedSurfaceBuilder.SurfaceType) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setType(OffsetCurveBuilder.Types) - Method in interface nxopen.features.OffsetCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setType(OffsetEmbossBuilder.Types) - Method in interface nxopen.features.OffsetEmbossBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(PatchOpeningsBuilder.Types) - Method in interface nxopen.features.PatchOpeningsBuilder
-
License requirements: None.
- setType(PatternFaceBuilder.PatternTypes) - Method in interface nxopen.features.PatternFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(PointSetBuilder.Types) - Method in interface nxopen.features.PointSetBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(RefitFaceBuilder.Types) - Method in interface nxopen.features.RefitFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(ReplaceFaceBuilder.ReplaceTypes) - Method in interface nxopen.features.ReplaceFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(ScaleBuilder.Types) - Method in interface nxopen.features.ScaleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(SectionCurveBuilder.PlaneType) - Method in interface nxopen.features.SectionCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(SectionInertiaAnalysisBuilder.Types) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(SectionSurfaceBuilder.Types) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setType(SectionSurfaceBuilderEx.Types) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setType(SewBuilder.Types) - Method in interface nxopen.features.SewBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(AdvancedFlangeBuilder.Types) - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setType(AeroLighteningCutoutBuilder.Types) - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setType(BreakCornerBuilder.TypeOptions) - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder
-
Sets the type of the break corner.
- setType(BridgeTransitionBuilder.TypeOptions) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setType(ClosedCornerBuilder.Types) - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setType(ExportFlatPatternBuilder.FileType) - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setType(GussetBuilder.Types) - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setType(HemFlangeBuilder.TypeOptions) - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setType(LighteningCutoutBuilder.CutoutType) - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setType(NormalCutoutBuilder.TypeOptions) - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Sets the type for the normal cutout.
- setType(ResizeBendRadiusBuilder.Types) - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setType(SolidPunchBuilder.Types) - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR sheet_metal_design ("SHEET METAL DESIGN")
.
- setType(BulkHeadsBuilder.BulkheadType) - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setType(CuttingSideFacesBuilder.Types) - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setType(DeckBuilder.Types) - Method in interface nxopen.features.shipdesign.DeckBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(EdgeReinforcementBuilder.Types) - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(ExcessMaterialBuilder.Types) - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setType(FeaturesBatchOperationBuilder.Types) - Method in interface nxopen.features.shipdesign.FeaturesBatchOperationBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setType(GenericPlateSystemBuilder.Types) - Method in interface nxopen.features.shipdesign.GenericPlateSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(HullBuilder.Types) - Method in interface nxopen.features.shipdesign.HullBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(InsertFramesBuilder.Types) - Method in interface nxopen.features.shipdesign.InsertFramesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setType(LongitudinalBulkheadBuilder.Types) - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(PillarSystemBuilder.Types) - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(PlateBuilder.Types) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setType(PlateChamferBuilder.Types) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setType(ProfileBuilder.TypeOption) - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setType(RollingLineBuilder.Types) - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setType(RoomBuilder.Types) - Method in interface nxopen.features.shipdesign.RoomBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setType(RoomPanelBuilder.Types) - Method in interface nxopen.features.shipdesign.RoomPanelBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setType(SeamBuilder.Types) - Method in interface nxopen.features.shipdesign.SeamBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(ShellTemplateBuilder.Types) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setType(ShipDesignPreferencesBuilder.Types) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
- setType(ShipPreparationInfo.Types) - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(SteelDistributionBuilder.SaType) - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setType(StiffenerBuilder.Types) - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setType(StiffenerSystemBuilder.Types) - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(TransverseBulkheadBuilder.Types) - Method in interface nxopen.features.shipdesign.TransverseBulkheadBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setType(SilhouetteFlangeBuilder.Types) - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setType(SmoothCurveStringBuilder.Types) - Method in interface nxopen.features.SmoothCurveStringBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setType(SmoothSplineBuilder.Types) - Method in interface nxopen.features.SmoothSplineBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setType(SnipSurfaceBuilder.Types) - Method in interface nxopen.features.SnipSurfaceBuilder
-
License requirements: None.
- setType(SphereBuilder.Types) - Method in interface nxopen.features.SphereBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(StudioSplineBuilderEx.Types) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(StudioXformBuilder.Types) - Method in interface nxopen.features.StudioXformBuilder
-
- setType(StudioXformBuilderEx.Types) - Method in interface nxopen.features.StudioXformBuilderEx
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setType(StyledBlendBuilder.Types) - Method in interface nxopen.features.StyledBlendBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setType(StyledSweepBuilder.Types) - Method in interface nxopen.features.StyledSweepBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setType(SubdivisionPrimitiveShapeBuilder.Types) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- setType(SubdivisionPrimitiveShapeBuilderEx.Types) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setType(SubdivisionProjectCageBuilder.Types) - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setType(SubdivisionSplitFaceBuilder.Types) - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setType(TextBuilder.Types) - Method in interface nxopen.features.TextBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(ToolingBoxBuilder.Types) - Method in interface nxopen.features.ToolingBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setType(TrimExtendBuilder.CreationTypes) - Method in interface nxopen.features.TrimExtendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(VarOffsetFaceBuilder.Types) - Method in interface nxopen.features.VarOffsetFaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setType(AllAroundVisionBuilder.Types) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setType(BaseDataLoadingBuilder.LoadingType) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setType(PedestrianProtectionBuilder.Types) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setType(VehicleCoordinateSystemBuilder.Types) - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
.
- setType(VirtualCurveBuilder.Types) - Method in interface nxopen.features.VirtualCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(WaveLinkBuilder.Types) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(WrapBuilder.Types) - Method in interface nxopen.features.WrapBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setType(FlatteningBuilder.Types) - Method in interface nxopen.FlatteningBuilder
-
- setType(FaceAnnotationBuilder.Types) - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setType(PathLengthAnnotationBuilder.Types) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- setType(DeviationChecking.Types) - Method in interface nxopen.geometricanalysis.DeviationChecking
-
License requirements: None.
- setType(HighlightLinesAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
- setType(RadiusAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
License requirements: None.
- setType(ReflectionAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
License requirements: None.
- setType(SectionAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setType(SurfaceContinuityAnalysisBuilder.Types) - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setType(BooleanOperation.BooleanType) - Method in interface nxopen.geometricutilities.BooleanOperation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setType(AssignCornerBuilder.CornerType) - Method in interface nxopen.mechanicalrouting.AssignCornerBuilder
-
- setType(GanttOperationBuilder.SimpleOperationType) - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
License requirements: None.
- setType(SupportBuilder.Types) - Method in interface nxopen.mfg.am.SupportBuilder
-
License requirements: am_pb_mtls_sg_2 ("Advanced NX Additive Support Geometry") OR am_pb_mtls_sg_1 ("Basic NX Additive Support Geometry")
.
- setType(ControlInputBuilder.InputType) - Method in interface nxopen.motion.ControlInputBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setType(LinkCouplerBuilder.TypeChoices) - Method in interface nxopen.motion.LinkCouplerBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setType(MotionSensorBuilder.Types) - Method in interface nxopen.motion.MotionSensorBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setType(PlantOutputBuilder.Poutype) - Method in interface nxopen.motion.PlantOutputBuilder
-
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- setType(TextBasedElementBuilder.TypeChoices) - Method in interface nxopen.motion.TextBasedElementBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setType(AssignDiscontinuityBuilder.Types) - Method in interface nxopen.routing.AssignDiscontinuityBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setType(FittingOverstockBuilder.Types) - Method in interface nxopen.routing.FittingOverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setType(SubdivideSegmentBuilder.Types) - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setType(WindCatcherBuilder.WindCatcherType) - Method in interface nxopen.routing.WindCatcherBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setType(KinematicAxisBuilder.AxisMotionType) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setType(KinematicChain.Types) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setType(SpreadsheetCellData.Types) - Method in interface nxopen.SpreadsheetCellData
-
License requirements: None.
- setType(AssemblyDrawingBuilder.Types) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(AssignPatchBuilder.Types) - Method in interface nxopen.tooling.AssignPatchBuilder
-
License requirements: None.
- setType(AutoDimensionBuilder.MainType) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(BackingPadBuilder.Types) - Method in interface nxopen.tooling.BackingPadBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(BendInsertDesignBuilder.Types) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(BendOperationBuilder.Types) - Method in interface nxopen.tooling.BendOperationBuilder
-
License requirements: None.
- setType(BlankGeneratorBuilder.Types) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setType(BlankLayoutBuilder.Types) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setType(ChangeoverManagementBuilder.Types) - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
License requirements: None.
- setType(ConcurrentDesignManagementBuilder.Types) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setType(CoolingDefineChannelBuilder.Types) - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setType(CornerDesignBuilder.Types) - Method in interface nxopen.tooling.CornerDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(CreateBoxBuilder.BoxType) - Method in interface nxopen.tooling.CreateBoxBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
.
- setType(DefineCamBuilder.Types) - Method in interface nxopen.tooling.DefineCamBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(DefineLifterBuilder.Types) - Method in interface nxopen.tooling.DefineLifterBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(DieBaseBuilder.Types) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setType(DieEngProcessUpdateManagerBuilder.Types) - Method in interface nxopen.tooling.DieEngProcessUpdateManagerBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setType(DirectUnbendBuilder.Bendtypes) - Method in interface nxopen.tooling.DirectUnbendBuilder
-
License requirements: None.
- setType(ElectrodeDeleteBuilder.Types) - Method in interface nxopen.tooling.ElectrodeDeleteBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setType(FaceSplitBuilder.FaceSplitType) - Method in interface nxopen.tooling.FaceSplitBuilder
-
License requirements: None.
- setType(GeneralInsertBuilder.Types) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(HoleReportBuilder.Types) - Method in interface nxopen.tooling.HoleReportBuilder
-
License requirements: None.
- setType(InsertAuxiliaryBuilder.Types) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setType(InsertEditToolsBuilder.Types) - Method in interface nxopen.tooling.InsertEditToolsBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(LsdynaKfileGeneratorBuilder.OperTypes) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(MotionSimulationBuilder.Types) - Method in interface nxopen.tooling.MotionSimulationBuilder
-
License requirements: None.
- setType(MWCopySheetsBuilder.Types) - Method in interface nxopen.tooling.MWCopySheetsBuilder
-
License requirements: None.
- setType(MWDefineSheetsBuilder.Types) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
License requirements: None.
- setType(ObjectAttributeManagementBuilder.ShowType) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(PiercingInsertBuilder.Types) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setType(QuickQuotationBuilder.Types) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setType(ReliefDesignBuilder.Types) - Method in interface nxopen.tooling.ReliefDesignBuilder
-
License requirements: None.
- setType(RenameAndExportComponentBuilder.Types) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(ReusePositioningObjectBuilder.Types) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setType(ShimBuilder.Types) - Method in interface nxopen.tooling.ShimBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(SlugRetentionBuilder.Types) - Method in interface nxopen.tooling.SlugRetentionBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(SmartScrewUpdateBuilder.Types) - Method in interface nxopen.tooling.SmartScrewUpdateBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(SpecialFormingBuilder.Types) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(SpecialPiercingInsertBuilder.Types) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(SplitSolidBuilder.OperationType) - Method in interface nxopen.tooling.SplitSolidBuilder
-
License requirements: None.
- setType(StockSizeBuilder.Types) - Method in interface nxopen.tooling.StockSizeBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(SubInsertBuilder.Types) - Method in interface nxopen.tooling.SubInsertBuilder
-
License requirements: None.
- setType(TrimSolidBuilder.Types) - Method in interface nxopen.tooling.TrimSolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(WireHoleBuilder.Types) - Method in interface nxopen.tooling.WireHoleBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setType(WorkpieceBuilder.Types) - Method in interface nxopen.tooling.WorkpieceBuilder
-
License requirements: None.
- setType(ResultObject.ResultTypes) - Method in interface nxopen.validate.ResultObject
-
License requirements: None.
- setType(AutoPointBuilder.Types) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setType(DatumSurfaceBuilder.Types) - Method in interface nxopen.weld.DatumSurfaceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setType(EasyPatternBuilder.Types) - Method in interface nxopen.weld.EasyPatternBuilder
-
License requirements: ugweld ("UG WELD")
.
- setType(TransformBuilder.TransformationTypes) - Method in interface nxopen.weld.TransformBuilder
-
License requirements: ugweld ("UG WELD")
.
- setType(WeldBeadBuilder.Types) - Method in interface nxopen.weld.WeldBeadBuilder
-
License requirements: ugweld ("UG WELD")
.
- setType(WeldGrooveBuilder.Types) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setType(WeldJointBuilder.Types) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setType2(HighlightLinesAnalysisBuilder.Types2) - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setTypeAssignOrCheck(ClearanceManagementBuilder.Type) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setTypeDesc(String) - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setTypeEnum(PlatformEquipmentBuilder.TypeAPI) - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setTypeName(String) - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTypeName(String) - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setTypeName(String) - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setTypeOfCurve(UserMotionBuilder.CurveType) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setTypeOfDraft(DraftBuilder.Type) - Method in interface nxopen.features.DraftBuilder
-
Sets the Draft type
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setTypeOfIDB(InstanceDataBlockBuilder.ActionType) - Method in interface nxopen.ame.InstanceDataBlockBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTypeOfMotion(UserMotionBuilder.MotionType) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setTypeOption(LbcAssociationMgr.BcType) - Method in interface nxopen.cae.LbcAssociationMgr
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setTypeOption(DriverOperation.Type) - Method in interface nxopen.motion.DriverOperation
-
License requirements: mechanisms ("MECHANISMS")
.
- setTypes(String) - Method in interface nxopen.ame.SubnetBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTypes(Function.Type, XyFunctionMacroType, XyFunctionGeneralType) - Method in interface nxopen.cae.FunctionBuilder
-
Sets types of a function
License requirements: None.
- setTypes(String[], String[]) - Method in interface nxopen.pdm.ObjectCreateBuilder
-
Set Types for which AttributeHolderObject needs to be created.
- setTypeSelection(PlcSymbolsEvaluatorBuilder.FilterType) - Method in interface nxopen.ame.PlcSymbolsEvaluatorBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setTypeStandard(ViewSectionLineBuilder.DisplayType) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setTyUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTz(InspectionAnalyzeBuilder.DofTypes) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTzLower(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setTzUpper(double) - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUde(int, Ude) - Method in interface nxopen.cam.Path
-
Set the UDE event at the given index; The CAM.Ude API object no longer is valid after this call
License requirements: None.
- setUde(PathEvent, Ude) - Method in interface nxopen.cam.Path
-
Updates the data of the ude event
License requirements: None.
- setUdeEndOfPath(NXObject) - Method in interface nxopen.cam.ToolPathDivideBuilder
-
License requirements: None.
- setUDegree(SectionSurfaceBuilder.UDegreeEnum) - Method in interface nxopen.features.SectionSurfaceBuilder
-
- setUDegree(SectionSurfaceBuilderEx.UDegreeType) - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setUDegree(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setUdeName(String) - Method in interface nxopen.cam.Ude
-
License requirements: cam_base ("CAM BASE")
.
- setUdeset(NXObject) - Method in interface nxopen.cam.InPathEventDataBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUdeSetStatus(boolean) - Method in interface nxopen.cam.InPathEventSetData
-
License requirements: cam_base ("CAM BASE")
.
- setUdeStartOfPath(NXObject) - Method in interface nxopen.cam.ToolPathDivideBuilder
-
License requirements: None.
- setUdfParms(Tag, String[], String[], int) - Method in interface nxopen.uf.UFModlGeneral
-
- setUDimension(int, int) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Sets dimension in U direction of a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setUdsSize(UFDrf.UdsSize) - Method in interface nxopen.uf.UFDrf
-
- setUdtByName(String) - Method in interface nxopen.ame.PlcSymbolBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setUEnabled(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setUEnd(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUEndDeg(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUEndDist(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUEndSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUgdefaultSbfFile() - Method in interface nxopen.uf.UFDrf
-
- setUghpglSmallTol(double, int) - Method in interface nxopen.uf.UFPlot
-
- setUghpglTol(double, int) - Method in interface nxopen.uf.UFPlot
-
- setUiSetting(SimDebugBuilder.UiType, boolean) - Method in interface nxopen.sim.SimDebugBuilder
-
Sets the debug setting
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setUmData(int[]) - Method in interface nxopen.cae.InterpolationEADBuilder
-
The set_um_data operator sets the array of 12 um_data values
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUnassigned(boolean) - Method in interface nxopen.plas.RunBuilder
-
License requirements: None.
- setUnassignedAxis(String) - Method in interface nxopen.sim.KinematicChannelBuilder
-
Sets an unassigned axis of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setUnattachedNodesInBoundingBoxRatio(double) - Method in interface nxopen.cae.ModelDisplayBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUncutRegionColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setUndefValueColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setUndercutsChecker(boolean) - Method in interface nxopen.features.AnalyzePocketBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUnderflowColor(NXColor) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setUndoMark(Session.MarkVisibility, String) - Method in interface nxopen.Session
-
Creates an undo mark
License requirements: None.
- setUndoMarkName(int, String) - Method in interface nxopen.Session
-
Sets the name of the undo mark
License requirements: None.
- setUndoMarkVisibility(int, String, Session.MarkVisibility) - Method in interface nxopen.Session
-
Sets the visibility of the specified undo mark
License requirements: None.
- setUnfoldedLength(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setUnfoldedWidth(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setUnfoldModeType(OnestepUnformBuilder.UnfoldMode) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setUnfoldSolid(Body) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setUnfoldType(DirectUnfoldBuilder.Types) - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
License requirements: None.
- setUnformFaceCollector(ScCollector) - Method in interface nxopen.features.sheetmetal.AeroReformBuilder
-
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setUnformNeutralFactor(double) - Method in interface nxopen.tooling.UniversalUnformBuilder
-
- setUnformSection(Section) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
License requirements: nx_onestep_analysis ("NX Onestep Analysis") OR nx_general_packaging ("NX General Packaging") OR die_engineering ("DIE ENGINEERING") OR aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setUngroupLevel(GroupBuilder.UngroupOption) - Method in interface nxopen.GroupBuilder
-
License requirements: None.
- setUniformCube(boolean) - Method in interface nxopen.features.LatticeBuilder
-
License requirements: nx_lattice_base (" NX Lattice Base")
.
- setUniformSpacingTolerance(double) - Method in interface nxopen.weld.AutoPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- setUniformU(boolean) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setUniformV(boolean) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setUnifyCharacteristics(NXObject.AttributeType, String, String) - Method in interface nxopen.routing.UnifyPathBuilder
-
Sets the characteristics to be applied
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setUnifyPathPlugin(CustomManager.UnifyPathPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will use for the Unify Path command.
- setUniqueIdentifier(String) - Method in interface nxopen.BasePart
-
License requirements: None.
- setUniqueMembership(boolean) - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
License requirements: None.
- setUniqueMembership(Tag) - Method in interface nxopen.uf.UFGroup
-
- setUniqueMembershipOption(boolean) - Method in interface nxopen.GroupBuilder
-
License requirements: None.
- setUnit(int) - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setUnit(XyFunctionUnit) - Method in interface nxopen.cae.AfuZHeaderInfo
-
Sets the unit type of Z axis
License requirements: None.
- setUnit(Unit) - Method in interface nxopen.cae.CrossSectionParameters
-
Set result unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setUnit(Unit) - Method in interface nxopen.cae.ResultMeasureResultOptions
-
Set the unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUnit(Unit) - Method in interface nxopen.cae.ResultParameters
-
Set result unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setUnit(Unit) - Method in interface nxopen.cae.ResultParametersWithNodalForceReport
-
Set result unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUnit(Unit) - Method in interface nxopen.cae.ResultParametersWithProbe
-
Set result unit
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUnit(Unit) - Method in interface nxopen.cae.ResultProbeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUnit(FeedRateUnit) - Method in interface nxopen.cam.InheritableFeedBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUnit(ReliefPlunge.UnitTypes) - Method in interface nxopen.cam.ReliefPlunge
-
License requirements: cam_base ("CAM BASE")
.
- setUnit(InitProjectBuilder.UnitId) - Method in interface nxopen.tooling.InitProjectBuilder
-
License requirements: None.
- setUnitBasis(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setUnitBasis(Tag, UFGdt.ModifierTypes, UFGdt.UnitBasis) - Method in interface nxopen.uf.UFGdt
-
- setUnitBasisValue1(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setUnitBasisValue2(String) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setUniteBodies(boolean) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setUnitEffectivityValue(int) - Method in interface nxopen.BasicEffectivityBuilder
-
License requirements: None.
- setUnitLabel(String) - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Sets the customized unit label
License requirements: None.
- setUnitLabel(String) - Method in interface nxopen.cae.AfuOrdinateHeaderInfo
-
Sets the customized unit label
License requirements: None.
- setUnitName(String) - Method in interface nxopen.cae.ftk.BaseUnit
-
Sets unit name
License requirements: None.
- setUnits(String) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setUnits(String) - Method in interface nxopen.AttributeTemplatesBuilder
-
License requirements: None.
- setUnits(TaggedObject) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setUnits(TaggedObject) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setUnits(TaggedObject) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setUnits(TaggedObject) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setUnits(TaggedObject) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setUnits(XyFunctionUnit, XyFunctionUnit, XyFunctionUnit) - Method in interface nxopen.cae.FunctionBuilder
-
Sets units of a function
License requirements: None.
- setUnits(CGMBuilder.UnitsOption) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setUnits(Unit) - Method in interface nxopen.diagramming.SheetBuilder
-
License requirements: None.
- setUnits(AnnotationSettingsBuilder.UnitsEnum) - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setUnits(DrawingSheetBuilder.SheetUnits) - Method in interface nxopen.drawings.DrawingSheetBuilder
-
License requirements: drafting ("DRAFTING")
.
- setUnits(DxfdwgImporter.UnitsEnum) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setUnits(Unit) - Method in interface nxopen.Expression
-
License requirements: None.
- setUnits(int) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUnits(Part.Units) - Method in interface nxopen.FileNew
-
License requirements: None.
- setUnits(SolidDensity.UnitsType) - Method in interface nxopen.geometricanalysis.SolidDensity
-
License requirements: None.
- setUnits(PlotBuilder.UnitsOption) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setUnits(PrintPDFBuilder.UnitsOption) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setUnits(Unit) - Method in interface nxopen.ScalarMatrixValue
-
License requirements: None.
- setUnits(int) - Method in interface nxopen.WidthDefinition
-
License requirements: None.
- setUnitsEnum(StudioImageCaptureBuilder.UnitsEnumType) - Method in interface nxopen.display.StudioImageCaptureBuilder
-
License requirements: None.
- setUnitsEnum(InsertSheetBuilder.APIUnits) - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setUnitsFormatPreferences(UnitsFormatPreferences) - Method in interface nxopen.annotations.DimensionPreferences
-
Sets the units and format preferences
License requirements: None.
- setUnitsFormatPreferences(UFDrf.UnitsFormatPreferences) - Method in interface nxopen.uf.UFDrf
-
- setUnitsFormatPrefs(UnitsFormatPreferences) - Method in interface nxopen.annotations.BaseSurfaceFinish
-
Sets the unit format preferences.
- setUnitsSystem(Result.ResultBasicUnit) - Method in interface nxopen.cae.ImportedSolutionBuilder
-
The units system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUnitsSystem(ResultsManipulationBuilder.UnitsSystem) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
The units system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUnitsSystemResult(Result) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
The result to copy the units system from
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUnitsToggle(boolean) - Method in interface nxopen.cam.FeedsWedmBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUnitSystem(UnitSystem) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
- setUnitSystem(FlexBodyBuilder.UnitSystemType) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setUnitSystemType(XyFunctionUnitSystem) - Method in interface nxopen.cae.xyplot.AxisStyleSetting
-
License requirements: None.
- setUnitType(Unit) - Method in interface nxopen.fields.FieldProfileTable
-
Edit with unit type
License requirements: None.
- setUnlinkInstances(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setUnloadingVerticalStiffness(MotionFunction) - Method in interface nxopen.motion.TirePropertyHighOrderParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setUnloadingVerticalStiffnessType(TirePropertyHighOrderParameters.UnloadingVertStiffType) - Method in interface nxopen.motion.TirePropertyHighOrderParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setUnloadTemplate(boolean) - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setUnmappedFaceThreshold(double) - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setUnmatchedGroupEnabled(boolean) - Method in interface nxopen.visualreporting.VisualReport
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setUnpopulatedBehaviour(SessionPdm.UnpopulatedBehaviourType) - Method in interface nxopen.preferences.SessionPdm
-
License requirements: None.
- setUnreferencedSpindle(String) - Method in interface nxopen.sim.KinematicChannelBuilder
-
Sets an unreferenced spindle of the channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setUnroutePlugin(CustomManager.AutoroutePlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will instead of the internal unroute method.
- setUnSelectedLayers(String) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setUnsolvedCurvesColor(int) - Method in interface nxopen.preferences.PartSketch
-
Sets the sketch unsolved curves color
License requirements: None.
- setUnspecifiedColor(NXColor) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
License requirements: None.
- SETUP - Static variable in class nxopen.cam.CAMSession.ObjectSubtype
-
Setup
- setup() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the setup
License requirements: None.
- setup() - Method in interface nxopen.sim.KinematicChain
-
Returns the setup component of the kinematic chain
License requirements: None.
- setup() - Method in interface nxopen.UFSession
-
- SETUP_ABS - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.ReportingCsysType
-
Setup Absolute
- SETUP_ELEMENT - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Any setup element classification
- SETUP_ZAXIS - Static variable in class nxopen.cam.InspectionUVGridBuilder.SphereAxisType
-
Z-axis stored in Setup
- setUparameter1(double) - Method in interface nxopen.weld.FilletBuilder
-
- setUparameter1(double) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setUparameter2(double) - Method in interface nxopen.weld.FilletBuilder
-
- setUparameter2(double) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setUpArea(SeatBeltAnchorageBuilder.UpperAreaType) - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUPatches(int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setUPatches(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setupBlocksParent() - Method in interface nxopen.die.RotorBuilder
-
Returns the setup blocks parent builder of the rotor.
- setupBodyColorData(DisplayableObject[]) - Method in interface nxopen.facet.PaintFacetBodyBuilder
-
Setup color data.
- setupColorData(FacetedBody[]) - Method in interface nxopen.facet.PaintFacetBodyBuilder
-
- setUpdateAllLevels(boolean) - Method in interface nxopen.assemblies.UpdateStructureBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setUpdateComponentName(boolean) - Method in interface nxopen.tooling.AddReusablePart
-
Sets the update component name for a reusable component
License requirements: None.
- setUpdateControl(Validation.UpdateTime) - Method in interface nxopen.Validation
-
Define the update behavior of the validation object
License requirements: None.
- setUpdateCoordinateSystem(boolean) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
License requirements: ugweld ("UG WELD")
.
- setUpdateDelayed(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the update delayed option.
- setUpdateDesignElementPositionOnLoad(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setUpdateDieBasePosition(boolean) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setUpdateDisp(boolean) - Method in interface nxopen.optimization.DesignStudyBuilder
-
License requirements: None.
- setUpdateDisp(boolean) - Method in interface nxopen.optimization.OptimizationBuilder
-
License requirements: None.
- setUpdateEntityOnResultChange(boolean) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set weather entity is to be updated in case of result update for min/max annotation
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setUpdateFailOption(UFModl.UpdateOption) - Method in interface nxopen.uf.UFModeling
-
- setUpdateFailureAction(TaggedObject, Update.FailureOption) - Method in interface nxopen.Update
-
Sets the update failure action for an object.
- setUpdateFailureReportPreference(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the option "Update Failure Report" gives choice, whether the
user wants the update failure report to be generated for the features that
failed during current update cycle.
- setUpdateFrameRate(int) - Method in interface nxopen.preferences.SessionMeasureRequirements
-
License requirements: None.
- setUpdateGunAssignmentToggle(boolean) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Set the gun assignment toggle
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setUpdateHiddenEdge(boolean) - Method in interface nxopen.preferences.PartVisualizationVisual
-
Sets the update hidden edges flag for working part.
- setUpdateIpw(boolean) - Method in interface nxopen.cam.TurningOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUpdateLayoutState(boolean) - Method in interface nxopen.cae.LayoutStateApplicator
-
Sets the update layout state flag.
- setUpdateLock() - Method in interface nxopen.tooling.MWPartingManagerBuilder
-
Set the update lock.
- setUpdateLock(boolean) - Method in interface nxopen.Update
-
Sets the update lock to lock and unlock updates.
- setUpdateOnSave(MassPropertiesBuilder.UpdateOptions) - Method in interface nxopen.MassPropertiesBuilder
-
License requirements: None.
- setUpdateOption(boolean) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUpdateOption(SmartObject.UpdateOption) - Method in interface nxopen.geometricutilities.ModlMotion
-
Set the update option for defining the update behavior for the object.
- setUpdateOption(SmartObject.UpdateOption) - Method in interface nxopen.IPlane
-
Set to plane update
License requirements: None.
- setUpdateOptions(ConcurrentDesignManagementBuilder.UpdateTypes) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setUpdateOverlayingAxisLimitsAutomatically(boolean) - Method in interface nxopen.cae.xyplot.Preference
-
License requirements: None.
- setUpdatePAXFile(boolean) - Method in interface nxopen.diagramming.SheetBuilder
-
License requirements: None.
- setUpdatePending(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the update pending option.
- setUpdatePressInformation(boolean) - Method in interface nxopen.tooling.DieEngLineupBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setUpdateScope(Sketch.UpdateLevel) - Method in interface nxopen.Sketch
-
Sets the current update scope.
- setUpdateSketchAtCommit(boolean) - Method in interface nxopen.SketchConstraintBuilder
-
License requirements: None.
- setUpdateSketchOnly(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not to update only the sketch while sketching using Direct Sketch.
- setUpdateStructureOnExpand(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the update structure on assembly tree expand option
License requirements: None.
- setUpdateViewWithoutLwData(PartDrafting.UpdateViewWithoutLwDataOption) - Method in interface nxopen.preferences.PartDrafting
-
Sets the option specifying the action when missing, incomplete or invalid lightweight
bodies are found during view create or update
License requirements: None.
- setUPercentage(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setupFacePairInContext(Feature) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Set face pair to edit
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setupPaintFacetBody() - Method in interface nxopen.facet.PaintBrushBuilder
-
Setup the paint facet body
License requirements: None.
- setUpperBase(Plane) - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setUpperBound(double) - Method in interface nxopen.cae.ModelUpdateDesignVariable
-
Sets upper bound
License requirements: nx_correl_update ("FE Model Update")
.
- setUpperBound(double) - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setUpperBound(String) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setUpperBoundFreq(double) - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
- setUpperBoundFrequency(double) - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setUpperBoundMultiplier(double) - Method in interface nxopen.cae.ModelUpdateOptionsBuilder
-
License requirements: nx_correl_update ("FE Model Update")
.
- setUpperBoundOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setUpperDeckRelief(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setUpperDeckThickness(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setUpperDMS(String) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUpperLegZonesOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUpperLimit(double) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUpperLimit(double) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUpperLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setUpperLimitDefined(boolean) - Method in interface nxopen.motion.JointDefine
-
Sets the option of defining upper limit for joint
License requirements: mechanisms ("MECHANISMS")
.
- setUpperLimitEnabled(boolean) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setUpperLimitRightHandSide(String) - Method in interface nxopen.positioning.Constraint
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setUpperLimitType(TurnRoughFinishLocalReturnBuilder.LimitTypes) - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Set the upper limits mode
License requirements: cam_base ("CAM BASE")
.
- setUpperLimitType(FillAreaBuilder.UpperLimitTypes) - Method in interface nxopen.die.FillAreaBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setUpperMetricToleranceValue(double) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the metric upper tolerance value of a dimension.
- setUpperPlane(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUpperPlane(Plane) - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setUpperPlane(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUpperRadius(String) - Method in interface nxopen.die.ThroatChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setUpperRoofFeature(HeadImpactUpperRoof) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUpperSoftLimit(double) - Method in interface nxopen.sim.KinematicAxisBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setUpperSource(InspectionToleranceOperationBuilder.ToleranceSource) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUpperText(String) - Method in interface nxopen.annotations.ArbitraryTargetData
-
Sets the upper text.
- setUpperText(String) - Method in interface nxopen.annotations.IArbitraryTarget
-
Sets the target upper text.
- setUpperText(String) - Method in interface nxopen.annotations.IdSymbolBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setUpperTextText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setUpperTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setUpperTolerance(double) - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
License requirements: None.
- setUpperToleranceDegrees(Value) - Method in interface nxopen.annotations.AngularTolerance
-
Sets the upper tolerance in degrees
License requirements: None.
- setUpperToleranceDegrees(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setUpperToleranceEnglish(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setUpperToleranceInches(Value) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the upper tolerance in inches
License requirements: None.
- setUpperToleranceMetric(double) - Method in interface nxopen.annotations.DimensionStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setUpperToleranceMm(Value) - Method in interface nxopen.annotations.LinearTolerance
-
Sets the upper tolerance in millimeters(MM)
License requirements: None.
- setUpperToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setUpperToleranceType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setUpperToleranceValue(double) - Method in interface nxopen.annotations.Dimension
-
Sets a setting to control the upper tolerance value of a dimension.
- setUpperToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
License requirements: None.
- setUpperToleranceValue(double) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setupPoleEditing() - Method in interface nxopen.features.MatchEdgeBuilder
-
Sets up surface pole editing.
- setupRegionsInfo() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Setup the UI data for defining regions
License requirements: None.
- setUpToleranceForLength(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setUpToleranceForWidth(double) - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setUpVector(Direction) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setUpVector(Direction) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setUpVectorValue(Vector3d) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setUrl(String) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setUrl(String) - Method in interface nxopen.annotations.UrlBusinessModifierBuilder
-
License requirements: geometric_tol ("GDT")
.
- setUrlValue(String) - Method in interface nxopen.annotations.PmiAttributeValueUrlBuilder
-
License requirements: None.
- setUrlValue(String) - Method in interface nxopen.annotations.PmiUrlNoteBuilder
-
License requirements: None.
- setUScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setUse(int) - Method in interface nxopen.WidthDefinition
-
License requirements: None.
- setUseAcceleration(boolean) - Method in interface nxopen.mechatronics.PositionControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseAcceleration(boolean) - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseAdditionalParameters(boolean) - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setUseAngle(int) - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Sets the use angle toggle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setUseAngle(int) - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Sets the use angle toggle of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- setUseApproxSheetBody(boolean) - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setUseAssemblyCrosshatch(boolean) - Method in interface nxopen.drawings.ViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setUseAutomatic(boolean) - Method in interface nxopen.cae.xyplot.CustomTextStyleSetting
-
License requirements: None.
- setUseAutomaticRefinement(boolean) - Method in interface nxopen.cae.FluidDomainBuilder
-
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- setUseBaseline(boolean) - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING")
.
- setUseBendRatio(boolean) - Method in interface nxopen.routing.BendCorner
-
- setUseBendRatio(boolean) - Method in interface nxopen.routing.OffsetPath
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setUseBlankTemplate(boolean) - Method in interface nxopen.FileNew
-
License requirements: None.
- setUseBottomPlateClearance(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUseBottomPlateClearance(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setUseBottomPlateClearance(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setUseCallbackValues(boolean) - Method in interface nxopen.weld.JointItemBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setUseCamera(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseCameraDirectionPlaneOption(CgfxMattexBuilder.UseCameraDirectionPlane) - Method in interface nxopen.display.CgfxMattexBuilder
-
- setUseCenterPoint(boolean) - Method in interface nxopen.features.BlendCornerBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setUseCleanupPass(boolean) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
License requirements: None.
- setUseClearance(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setUseClosestNode(boolean) - Method in interface nxopen.motion.MarkerToNodeData
-
Sets the flag UseClosestNode.
- setUseConstraintsAll(boolean) - Method in interface nxopen.features.RefitFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUseContextAssembly(boolean) - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setUseControlData(boolean) - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUseCoverOffset(boolean) - Method in interface nxopen.linedesigner.CoverFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setUseCoverOffset(boolean) - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setUseCurveFinder(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setUseCustomShapeSize(boolean) - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
License requirements: shape_search ("Shape Search")
.
- setUseCutColor(boolean) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUseCutHatch(boolean) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUseCyclicSymmetryCsys(boolean) - Method in interface nxopen.cae.BaseFemPart
-
Sets the use cyclic symmetry csys flag
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUseCylindricalCsys(boolean) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setUsedArrangement(Arrangement) - Method in interface nxopen.assemblies.Component
-
Changes the Arrangement used for this component.
- setUsedArrangement(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- setUseDefaultKeepSide(boolean) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
License requirements: None.
- setUseDefiningPoints(boolean) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setUseDegMin(InspectionToleranceOperationBuilder.AngleFormat) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUseDiePlateClearance(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUseDiePlateClearance(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setUseDifferentSubIndexForSameDiameterHoles(boolean) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUseDraftedBodyAsPartingObject(boolean) - Method in interface nxopen.features.DraftBodyBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUseDrawingSheetColors(boolean) - Method in interface nxopen.PlotColorsWidthsBuilder
-
License requirements: None.
- setUseDrawingSheetWidths(boolean) - Method in interface nxopen.PlotColorsWidthsBuilder
-
License requirements: None.
- setUsedUnit(int) - Method in interface nxopen.sim.MachineToolConfiguration
-
Sets the used unit
License requirements: None.
- setUseEffectDist(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUseEffectDist(boolean) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUseEffectiveBiaxialityRatio(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setUseElements(DurabilityEventOverridesBuilder.UseElementsEnum) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setUseElementSpecificValue(boolean) - Method in interface nxopen.cae.modelcheck.ElementQualitySetting
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUseEntryAvoidance(boolean) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUseEnvironment(boolean) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setUseEvents(DurabilityResultsReportBuilder.UseEventsEnum) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setUseExactPositioning(boolean) - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
License requirements: None.
- setUseExistingCuttingSideFace(boolean) - Method in interface nxopen.features.shipdesign.MarkingLineDesignBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setUseExistingID(boolean) - Method in interface nxopen.pid.EquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setUseExistingID(boolean) - Method in interface nxopen.pid.PortEquipmentBuilder
-
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- setUseExistingSheetBody(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUseExitAvoidance(boolean) - Method in interface nxopen.cam.InspectionPathBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUseExportSessionWidths(boolean) - Method in interface nxopen.CGMImporter
-
Sets
License requirements: None.
- setUseEyeFrom(MirrorCertificationBuilder.EyeFromOptionType) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseFaceBrowse(boolean) - Method in interface nxopen.features.FaceRecognitionBuilder
-
License requirements: gateway ("UG GATEWAY")
.
- setUseFaceCapBlend(boolean) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUseFaceCenterAsLocation(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setUseFaceOrSketch(InsertAuxiliaryBuilder.UseFaceOrSketchToRevolve) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUseFeatureCollisionAvoidance(boolean) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUseFeatureCollisionAvoidance(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUseFeatureNameAsType(boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
License requirements: None.
- setUseFeetInchesAndFraction(boolean) - Method in interface nxopen.drafting.AutomationRuleBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setUseFileDirectory(boolean) - Method in interface nxopen.VirtuallabImporter
-
License requirements: None.
- setUseFillin(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setUseFlippedGunIncCheckToggle(boolean) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setUseFrequencyFiltering(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setUseFrontHeadRests(boolean) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseGeneralSurface(boolean) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseGlobal(boolean) - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setUseGlobal(boolean) - Method in interface nxopen.features.sheetmetal.CornerTreatmentBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setUseGlobal(boolean) - Method in interface nxopen.features.sheetmetal.HoleTreatmentBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setUseGlobal(boolean) - Method in interface nxopen.features.sheetmetal.ResizeNeutralFactorBuilder
-
Sets the Use Global Neutral Factor toggle.
- setUseGlobalBendRadius(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the Use Global Bend Radius toggle.
- setUseGlobalFontSetting(boolean) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setUseGlobalNeutralFactor(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the Use Global Neutral Factor toggle.
- setUseGlobalReliefDepth(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the Use Global Relief Depth toggle.
- setUseGlobalReliefWidth(boolean) - Method in interface nxopen.features.sheetmetal.BendOptions
-
Sets the Use Global Relief Width toggle.
- setUseGlobalThickness(boolean) - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setUseHighestQuality(boolean) - Method in interface nxopen.cae.optimization.TBSMeshSmooth
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setUseHighlight(boolean) - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setUseHoleDiameter(boolean) - Method in interface nxopen.features.DeleteFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setUseIbl(boolean) - Method in interface nxopen.ModelingViewHighQualityImage
-
Sets the setting for whether the High Quality Image is to use IBL
License requirements: None.
- setUseImageBasedLighting(boolean) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setUseInferredReferencePoint(boolean) - Method in interface nxopen.features.MirrorBuilder
-
- setUseInferredReferencePoint(boolean) - Method in interface nxopen.features.PatternFeatureBuilder
-
- setUseInstance(boolean) - Method in interface nxopen.tooling.EWDraftingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setUseItemTypeFromPartFile(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setUseLightsForShadowCatcherInHqi(boolean) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setUseLightsForShadowCatcherInLwrt(boolean) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setUseLightsForShadowCatcherInLwrt(boolean) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setUseLightweightRepresentations(boolean) - Method in interface nxopen.LoadOptions
-
Sets the option that controls if components are displayed with a lightweight
or exact representation.
- setUseLimits(boolean) - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setUseLimitsListFlag(boolean) - Method in interface nxopen.features.FaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUseLineAntialiasing(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setUseLineLength(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setUseLoadingSpecifiedByStandard(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseLoadingSpecifiedByStandard(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseLwrtEnvironment(boolean) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setUseLwrtImageBasedLighting(boolean) - Method in interface nxopen.display.ImageBasedLighting
-
License requirements: None.
- setUseMachineCycle(boolean) - Method in interface nxopen.cam.TurningOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUseMarginal(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseMaterialTable(boolean) - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- setUseMaxLength(boolean) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setUseMaxLength(boolean) - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- setUseMaxLengthStep(boolean) - Method in interface nxopen.cae.connections.ILineDiscretization
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUseMaxWidth(boolean) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUseMidNodes(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUseMinimumCheckingValue(boolean) - Method in interface nxopen.routing.SplinePathBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setUseMinLength(boolean) - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setUseMirror(boolean) - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseMiter(boolean) - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setUseModelDepth(boolean) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
License requirements: cam_base ("CAM BASE")
.
- setUseModelDepth(boolean) - Method in interface nxopen.cam.HoleDrilling
-
License requirements: cam_base ("CAM BASE")
.
- setUseNearestPointOnSection(boolean) - Method in interface nxopen.features.BridgeCurveBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setUseNewDefaultSectionAlgorithm(boolean) - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design")
.
- setUseNewSortForDebug(boolean) - Method in interface nxopen.pdm.SmartSaveBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setUseNonLinear(boolean) - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setUseNormalCutoutMethod(boolean) - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Sets the cut type of the sheet.
- setUseNotchFactor(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setUseOffset(boolean) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setUseOffset(boolean) - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setUseOnePickPositionMethod(boolean) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
License requirements: None.
- setUseOnePickPositionMethod(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setUseOriginalNodesOfConnection(boolean) - Method in interface nxopen.cae.connections.ILineDiscretization
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUsePart(DmBndBuilder.UsePartTypes) - Method in interface nxopen.cam.DmBndBuilder
-
License requirements: None.
- setUsePartCollisionAvoidance(boolean) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUsePartCollisionAvoidance(boolean) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUsePartDirectoryAsDefaultExportLocation(boolean) - Method in interface nxopen.report.ReportPreference
-
License requirements: None.
- setUsePartialLoading(boolean) - Method in interface nxopen.LoadOptions
-
Sets the option that controls the partial loading of components.
- setUsePartNormal(boolean) - Method in interface nxopen.cam.DPMItpBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUsePercent(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setUsePitchOption(AngularPatternSpacing.UsePitchOptions) - Method in interface nxopen.geometricutilities.AngularPatternSpacing
-
License requirements: None.
- setUsePlaneCapBlend(boolean) - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUsePlaneOffset(boolean) - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Sets the match cut dimension use plane offset value.
- setUsePlateClearanceEighth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceFifth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceFirst(boolean) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceFirst(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceFirst(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceFourth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceFourth(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceNinth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceSecond(boolean) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceSecond(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceSecond(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceSeventh(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceSixth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceTenth(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceThird(boolean) - Method in interface nxopen.tooling.BurringInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceThird(boolean) - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateClearanceThird(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePlateThicknessCorrection(boolean) - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setUsePortRotateFlag(boolean) - Method in interface nxopen.positioning.ConstraintReference
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setUsePreferredPortFlag(RoutingPart.UsePreferredPort) - Method in interface nxopen.preferences.RoutingPart
-
Sets whether or not to use the preffered placement port during
calcluation of placement solutions during place part.
- setUsePrevious2dIpw(boolean) - Method in interface nxopen.cam.MillCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setUseProjectedCurve(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setUseProjectPoint(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setUsePunchPlateClearance(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUsePunchPlateClearance(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setUsePunchPlateClearance(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setUseQuery(boolean) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUser(String) - Method in interface nxopen.routing.DesignRuleOverride
-
Sets the user of the design rule override is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setUseRadialDirectionToggle(boolean) - Method in interface nxopen.geometricutilities.CircularPattern
-
License requirements: None.
- setUseRadialDirectionToggle(boolean) - Method in interface nxopen.geometricutilities.PolygonPattern
-
License requirements: None.
- setUserAttribute(NXObject.AttributeInformation, Update.Option) - Method in interface nxopen.NXObject
-
Creates or modifies an attribute with the option to update or not.
- setUserAttribute(String, int, int, Update.Option) - Method in interface nxopen.NXObject
-
Creates or modifies an integer attribute with the option to update or not.
- setUserAttribute(String, int, double, Update.Option) - Method in interface nxopen.NXObject
-
Creates or modifies a real attribute with the option to update or not.
- setUserAttribute(String, int, String, Update.Option) - Method in interface nxopen.NXObject
-
Creates or modifies a string attribute with the option to update or not.
- setUserAttribute(String, int, Update.Option) - Method in interface nxopen.NXObject
-
Creates or modifies a null attribute with the option to update or not.
- setUserAttributeLock(String, NXObject.AttributeType, boolean) - Method in interface nxopen.NXObject
-
Lock or unlock the given attribute.
- setUserAttributeLockWithTitleAndType(Tag, String, int, boolean) - Method in interface nxopen.uf.UFAttr
-
- setUserAttributes(String, NXObject.AttributeInformation, NXObject.AttributeInformation) - Method in interface nxopen.cae.AttributeSelectionRecipe
-
Sets or adds the low and high value of user attribute with given name.
- setUserAttributes(boolean, String, boolean, int, String[], NXObject.AttributeInformation[], NXObject.AttributeInformation[]) - Method in interface nxopen.cae.AttributeSelectionRecipe
-
Convenience method to set multiple attributes at once.
- setUserBasePoint(Point) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setUserClassDir(String[], int) - Method in interface nxopen.uf.UFKf
-
- setUserClassName(String) - Method in interface nxopen.Validation
-
Set user class name
License requirements: None.
- setUserComment(String, String) - Method in interface nxopen.options.ChangeList
-
Sets the user comment.
- setUserComment(String, String) - Method in interface nxopen.options.DraftingStandardChangeList
-
Sets the user comment.
- setUserComments(String) - Method in interface nxopen.assemblies.productinterface.InterfaceObject
-
Sets the user comments on the input product interface object
License requirements: None.
- setUserComments(InterfaceObject, String) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Sets the user comments on the product interface item passed in
License requirements: None.
- setUserCoordinateSystem(CoordinateSystem) - Method in interface nxopen.weld.WeldPmiBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setUserCsys(CoordinateSystem) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setUserCsys(CoordinateSystem) - Method in interface nxopen.weld.WeldLabelBuilder
-
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- setUserData(double) - Method in interface nxopen.cae.PostGraphBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setUserData(UFVariant, UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- setUserDataSize(UFVariant, int) - Method in interface nxopen.uf.UFDpud
-
- setUserDefinedClass(UserDefinedClass) - Method in interface nxopen.features.UserDefinedObjectFeatureBuilder
-
License requirements: None.
- setUserDefinedClass(UserDefinedClass) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
License requirements: None.
- setUserDefinedDieInsertClearance(double) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUserDefinedDieInsertClearance(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.RmsResultsEvaluationSettingBuilder
-
- setUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setUserDefinedDirection(Direction) - Method in interface nxopen.cae.responsesimulation.VelocityImpactDirection
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setUserDefinedExtrudeDirection(Vector3d) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUserDefinedInterLaminarFailureTheory(String) - Method in interface nxopen.cae.Laminate
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setUserDefinedInterLaminarFailureTheory(String) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setUserDefinedObject(UserDefinedObject) - Method in interface nxopen.features.UserDefinedObjectFeatureBuilder
-
License requirements: None.
- setUserDefinedPlane(Xform) - Method in interface nxopen.annotations.PlaneBuilder
-
License requirements: None.
- setUserDefinedPlyFailureTheory(String) - Method in interface nxopen.cae.Laminate
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setUserDefinedPlyFailureTheory(String) - Method in interface nxopen.cae.LaminatePly
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setUserDefinedProjDir(Direction) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setUserDefinedPunchPenetration(double) - Method in interface nxopen.tooling.PiercingInsertBuilder
-
License requirements: None.
- setUserDefinedPunchPenetration(double) - Method in interface nxopen.tooling.PunchInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUserDefinedStressRecoveryPoints(Point2d[]) - Method in interface nxopen.cae.IBeamSectionBuilder
-
Sets the user-defined stress recovery points.
- setUserDefinedSymbolAspectRatio(double) - Method in interface nxopen.annotations.AppendedTextBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setUserDefinedSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the user defined symbol color, font, and width
License requirements: None.
- setUserDefinedSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setUserDefinedSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setUserDefinedSymbolHeight(double) - Method in interface nxopen.annotations.AppendedTextBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setUserDefinedSymbolLength(double) - Method in interface nxopen.annotations.AppendedTextBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setUserDefinedSymbolScale(double) - Method in interface nxopen.annotations.AppendedTextBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setUserDefinedSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setUserDefinedText(String) - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Sets the user defined text, if the user defined symbol option is used to display the origin
License requirements: None.
- setUserDefinedText(String) - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setUserDefinedText(String[]) - Method in interface nxopen.cae.xyplot.CustomTextStyleSetting
-
Sets the text content defined by user.
- setUserDefinedUnitsSystem(Result.ResultBasicUnit) - Method in interface nxopen.cae.ResultsManipulationBuilder
-
The user-defined units system
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUserDescription(String) - Method in interface nxopen.cae.connections.IConnection
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUseRearHeadRests(boolean) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseRecipe(boolean) - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setUseRefset(JtCreator.RefsetOption) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setUseRepairTolerance(boolean) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the use repair tolerance flag.
- setUserExpressions(String[], String[]) - Method in interface nxopen.tooling.AddReusableFeatureBuilder
-
Sets the user expressions value
License requirements: None.
- setUserFunction(TaggedObject) - Method in interface nxopen.cae.LaminateDynamicEventBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setUseRibMaxArea(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUseRibMaxElem(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUseRibMinBoundaryNodeRatio(boolean) - Method in interface nxopen.cae.RemoveRibsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUserInsertionPoint(Point) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setUserLayer(int) - Method in interface nxopen.motion.AddSubmechanismBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setUserLocked(boolean) - Method in interface nxopen.Expression
-
License requirements: None.
- setUserName(String) - Method in interface nxopen.cae.BaseResultType
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setUsername(String) - Method in interface nxopen.routing.DesignRuleViolationViewer
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setUserName(String) - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setUserNameOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setUserPrompt(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUserPrompt(String) - Method in interface nxopen.visualreporting.Condition
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setUserPromptOfCondition(Condition, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setUserReferenceDirection(Direction) - Method in interface nxopen.display.ImageBaseBuilder
-
License requirements: None.
- setUserRemarks(String[]) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Sets the user remarks with the feature.
- setUserRole(String) - Method in interface nxopen.uf.UFUgmgr
-
- setUserSelectedObjects(boolean) - Method in interface nxopen.geometricutilities.BlendLimitsData
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUserSpecifiedUnit(MechanicalLoadSumBuilder.UserUnit) - Method in interface nxopen.cae.MechanicalLoadSumBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUserSpecifiedUnit(SolidPropertyCheckBuilder.UserUnit) - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUserSymbolPreferences(UserSymbolPreferences) - Method in interface nxopen.annotations.DimensionData
-
Sets the user defined symbol preferences
License requirements: None.
- setUserSymbolPreferences(UserSymbolPreferences) - Method in interface nxopen.annotations.SimpleDraftingAid
-
Sets the user symbol preferences.
- setUserSymbolPreferences(UserSymbolPreferences) - Method in interface nxopen.annotations.SimpleDraftingAidPreferences
-
Sets the user symbol preferences
License requirements: None.
- setUserSymbolSize(UserSymbolPreferences.SizeType, double, double) - Method in interface nxopen.annotations.SimpleDraftingAid
-
Sets the user symbol size.
- setUserText(String[]) - Method in interface nxopen.cae.PostAnnotation
-
Put the user text in each box
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setUsertext(String[]) - Method in interface nxopen.cae.PostAnnotationBuilder
-
Set the user text
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setUsertoolMenuEntry(int, String, String) - Method in interface nxopen.uf.UFUi
-
- setUsertypename(String) - Method in interface nxopen.cae.ResultVariable
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setUseSameStock(boolean) - Method in interface nxopen.routing.PlatformCreatorBuilder
-
License requirements: routing_platform ("Routing Platform")
.
- setUseSaveAs(boolean) - Method in interface nxopen.features.MasterCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUseScale(boolean) - Method in interface nxopen.mechatronics.AccelerometerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseScale(boolean) - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseScale(boolean) - Method in interface nxopen.mechatronics.GenericSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseScale(boolean) - Method in interface nxopen.mechatronics.InclinometerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseScale(boolean) - Method in interface nxopen.mechatronics.PositionSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseScale(boolean) - Method in interface nxopen.mechatronics.VelocitySensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseSeedFace(boolean) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setUseSegmentedBends(boolean) - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setUseShadowCatcher(boolean) - Method in interface nxopen.display.Shadows
-
License requirements: None.
- setUseSingleLine(boolean) - Method in interface nxopen.cae.xyplot.AxisLabelStyle
-
License requirements: None.
- setUsesMasterModel(String) - Method in interface nxopen.FileNew
-
License requirements: None.
- setUseSmfeatTog(boolean) - Method in interface nxopen.tooling.InitProjBuilder
-
License requirements: None.
- setUseSolvingTolerance(boolean) - Method in interface nxopen.preferences.SessionSketch
-
Sets the setting that controls whether or not to use user input for sketch solving tolerance.
- setUseSolvingTolerance(boolean) - Method in interface nxopen.preferences.SketchPreferences
-
Sets the setting that controls whether or not to use user input for sketch solving tolerance.
- setUseSourceMeshCollector(boolean) - Method in interface nxopen.cae.ElementModifyTypeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setUseSpacingToggle(boolean) - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Sets the status for using column row spacing of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setUseSpecificDirection(boolean) - Method in interface nxopen.features.PoleSmoothingBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setUseSplinePoint(boolean) - Method in interface nxopen.MeshParameterData
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setUseSplineToDefineSurface(boolean) - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
License requirements: cae_opt_toposhape ("NX Shape Optimization")
.
- setUseStabilizerBar(boolean) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseStageSizeAndOrientation(boolean) - Method in interface nxopen.display.Background
-
License requirements: None.
- setUseStandardLoading(boolean) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseStandardLoading(boolean) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseStartSectionFile(boolean) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setUseStripperPlateClearance(boolean) - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setUseStripperPlateClearance(boolean) - Method in interface nxopen.tooling.FormingInsertBuilder
-
License requirements: None.
- setUseStripperPlateClearance(boolean) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setUseSurfaceApproximation(boolean) - Method in interface nxopen.features.ShellBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setUseSurfaceNormal(boolean) - Method in interface nxopen.features.ConcaveFacesBuilder
-
License requirements: None.
- setUseSymbol(boolean) - Method in interface nxopen.tooling.ChannelFittingBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setUseSymbol(boolean) - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setUseSystemPrecision(boolean) - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Sets the use system precision flag.
- setUseTangentEdgeAngles(boolean) - Method in interface nxopen.cam.GeometrySet
-
License requirements: cam_base ("CAM BASE")
.
- setUseTangentEdgeAngles(boolean) - Method in interface nxopen.cam.SurfaceRegions
-
License requirements: cam_base ("CAM BASE")
.
- setUseTangentEdgeAngles(boolean) - Method in interface nxopen.features.ExtractFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setUseTaperedShank(boolean) - Method in interface nxopen.cam.MillingToolBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUseTargetPoint(boolean) - Method in interface nxopen.display.CameraBuilder
-
License requirements: None.
- setUseTessellationFile(boolean) - Method in interface nxopen.motion.BodyContactSphereToCAD
-
License requirements: mechanisms ("MECHANISMS")
.
- setUseToolHolder(boolean) - Method in interface nxopen.cam.CutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setUseTransientDamping(boolean) - Method in interface nxopen.motion.FlexBodyBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setUseTranslucency(boolean) - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
License requirements: drafting ("DRAFTING")
.
- setUseTransparentBackground(boolean) - Method in interface nxopen.display.SaveImageFileBrowserBuilder
-
License requirements: None.
- setUseTriangularMesh(boolean) - Method in interface nxopen.preferences.SessionModeling
-
Sets the use triangular mesh setting setting.
- setUseTrim(boolean) - Method in interface nxopen.mechatronics.AccelerometerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseTrim(boolean) - Method in interface nxopen.mechatronics.GenericSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseTrim(boolean) - Method in interface nxopen.mechatronics.InclinometerBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseTrim(boolean) - Method in interface nxopen.mechatronics.PositionSensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseTrim(boolean) - Method in interface nxopen.mechatronics.VelocitySensorBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseTwoArrows(boolean) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
License requirements: geometric_tol ("GDT")
.
- setUseType(int) - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setUseUnderAxleSurface(boolean) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseUnspecified(boolean) - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
License requirements: None.
- setUseUserDefinedTp(boolean) - Method in interface nxopen.cam.HoleMakingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setUseVehiclePackagingData(boolean) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setUseWindshieldEdge(boolean) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseWireFrameOnly(boolean) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setUseWithAdvancedStudioImageBasedLighting(boolean) - Method in interface nxopen.display.LightBuilder
-
License requirements: None.
- setUseWithIbl(boolean) - Method in interface nxopen.display.LightBuilder
-
- setUseWithRayTracedImageBasedLighting(boolean) - Method in interface nxopen.display.LightBuilder
-
License requirements: None.
- setUseYDirectionToggle(boolean) - Method in interface nxopen.geometricutilities.AlongPathPattern
-
License requirements: None.
- setUseYDirectionToggle(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setUsingDrapingMeshSize(boolean) - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setUsingPhysicalHysteretic(boolean) - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setUsingPhysicalHysteretic(boolean) - Method in interface nxopen.motion.FlexPhysicalDampingSettings
-
License requirements: mechanisms ("MECHANISMS")
.
- setUsingPhysicalViscous(boolean) - Method in interface nxopen.cae.responsesimulation.PhysicalDampingSettings
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setUsingPhysicalViscous(boolean) - Method in interface nxopen.motion.FlexPhysicalDampingSettings
-
License requirements: mechanisms ("MECHANISMS")
.
- setUsingUserDefinedDirection(NodalFunctionEvalRequest) - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setUsingUserDefinedDirection(boolean) - Method in interface nxopen.cae.responsesimulation.RmsResultsEvaluationSettingBuilder
-
- setUStart(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUStartDeg(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUStartDist(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUStartEndMode(InspectionSurfaceFeatureBuilder.StartEndModeType) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUStartMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUStartSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUtf8Value(String, String) - Method in interface nxopen.options.ChangeList
-
- setUtf8Value(String, String[]) - Method in interface nxopen.options.ChangeList
-
- setUtf8Value(String, String) - Method in interface nxopen.options.DraftingStandardChangeList
-
- setUtilization(double) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setUVGrid(boolean) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setUvGrid(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the status of UV grid, if true, grid curves for selected drawing
member views are added else the grid curves are removed from
the selected member views.
- setUVGrid(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setUvGrid(boolean) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the status of UV grid.
- setUVOrientation(NSidedSurfaceBuilder.UVOrientationType) - Method in interface nxopen.features.NSidedSurfaceBuilder
-
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setUz(boolean) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setValid(boolean) - Method in interface nxopen.features.shipdesign.PlaneListBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setValidateFormboardPlugin(CustomManager.ValidateFormboardPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin Routing will call to validate the harnesses on a formboard.
- setValidateType(CloseRangeDemoCylinderListItemBuilder.ValidateTypes) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setValidationAbortImportOnFail(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationAbortOption(boolean) - Method in interface nxopen.uf.UFClone
-
- setValidationMode(PartOperationImportBuilder.Validation) - Method in interface nxopen.pdm.NativePartLogicalObject
-
Sets the validation mode setting defined for this part
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationMode(PartOperationImportBuilder.Validation) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationOptions(String, UFClone.ValidationOpts) - Method in interface nxopen.uf.UFClone
-
- setValidationProperties(boolean) - Method in interface nxopen.Step203Creator
-
- setValidationProperties(boolean) - Method in interface nxopen.Step214Creator
-
- setValidationProperties(boolean) - Method in interface nxopen.StepCreator
-
License requirements: None.
- setValidationRuleSetBrowseOption(PartOperationImportBuilder.ValidationRuleSetFileBrowseOption) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationRuleSetBrowseOption(PartOperationImportBuilder.ValidationRuleSetFileBrowseOption) - Method in interface nxopen.pdm.PartOperationValidationPropertiesBuilder
-
Sets the validation rule set browse option
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationRuleSetFile(String) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationRuleSetFile(String) - Method in interface nxopen.pdm.PartOperationValidationPropertiesBuilder
-
Sets the validation rule set file
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationRuleSetFileBrowseOption(PartOperationImportBuilder.ValidationRuleSetFileBrowseOption) - Method in interface nxopen.pdm.NativePartLogicalObject
-
Sets the validation rule set file browse option defined for this part
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationTreatOutdatedAsPass(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationTreatOutdatedAsPass(boolean) - Method in interface nxopen.pdm.PartOperationValidationPropertiesBuilder
-
Sets the validation treat outdated as pass flag
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationTreatWarningAsPass(boolean) - Method in interface nxopen.pdm.PartOperationImportBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidationTreatWarningAsPass(boolean) - Method in interface nxopen.pdm.PartOperationValidationPropertiesBuilder
-
Sets the validation treat warning as pass flag
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setValidityFlag(boolean) - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValidValues(String[]) - Method in interface nxopen.validate.RequirementBuilder
-
Sets the valid values
License requirements: None.
- setValleys(boolean) - Method in interface nxopen.cam.CleanupSettings
-
License requirements: cam_base ("CAM BASE")
.
- setValue(AMEBaseNode) - Method in interface nxopen.ame.SelectAMEBaseNode
-
Sets the object being selected
License requirements: None.
- setValue(AMEBaseNode, View, Point3d) - Method in interface nxopen.ame.SelectAMEBaseNode
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(AMEExtendedObject) - Method in interface nxopen.ame.SelectAMEExtendedObject
-
Sets the object being selected
License requirements: None.
- setValue(AMEExtendedObject, View, Point3d) - Method in interface nxopen.ame.SelectAMEExtendedObject
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(AMEPort) - Method in interface nxopen.ame.SelectAMEPort
-
Sets the object being selected
License requirements: None.
- setValue(AMEPort, View, Point3d) - Method in interface nxopen.ame.SelectAMEPort
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(AspectNode) - Method in interface nxopen.ame.SelectAspectNode
-
Sets the object being selected
License requirements: None.
- setValue(AspectNode, View, Point3d) - Method in interface nxopen.ame.SelectAspectNode
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Annotation) - Method in interface nxopen.annotations.SelectAnnotation
-
Sets the object being selected
License requirements: None.
- setValue(Annotation, View, Point3d) - Method in interface nxopen.annotations.SelectAnnotation
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Dimension) - Method in interface nxopen.annotations.SelectDimension
-
Sets the object being selected
License requirements: None.
- setValue(Dimension, View, Point3d) - Method in interface nxopen.annotations.SelectDimension
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(String) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setValue(Component) - Method in interface nxopen.assemblies.SelectComponent
-
Sets the object being selected
License requirements: None.
- setValue(Component, View, Point3d) - Method in interface nxopen.assemblies.SelectComponent
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(double) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setValue(double) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setValue(double) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setValue(int) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setValue(double) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setValue(String[]) - Method in interface nxopen.blockstyler.MultilineString
-
Sets the Value
License requirements: None.
- setValue(int[]) - Method in interface nxopen.blockstyler.ObjectColorPicker
-
Sets the Value
License requirements: None.
- setValue(double) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setValue(double) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setValue(int) - Method in interface nxopen.blockstyler.RGBColorPicker
-
License requirements: None.
- setValue(String) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setValue(boolean) - Method in interface nxopen.blockstyler.Toggle
-
License requirements: None.
- setValue(boolean) - Method in interface nxopen.cae.aerostructures.author.OutputBoolean
-
Set boolean value.
- setValue(String, boolean) - Method in interface nxopen.cae.aerostructures.author.OutputBoolean
-
Set boolean value for a failure mode
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(String, int, boolean) - Method in interface nxopen.cae.aerostructures.author.OutputBoolean
-
Set boolean value for a failure mode and a loadcase specified by its index
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(int) - Method in interface nxopen.cae.aerostructures.author.OutputInteger
-
Set integer value.
- setValue(String, int) - Method in interface nxopen.cae.aerostructures.author.OutputInteger
-
Set integer value for a failure mode
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(String, int, int) - Method in interface nxopen.cae.aerostructures.author.OutputInteger
-
Set integer value for a failure mode and a loadcase specified by its index
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(double) - Method in interface nxopen.cae.aerostructures.author.OutputScalar
-
Set scalar value according to default unit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(double, Unit) - Method in interface nxopen.cae.aerostructures.author.OutputScalar
-
Set scalar value with a specific unit type.
- setValue(String, double) - Method in interface nxopen.cae.aerostructures.author.OutputScalar
-
Set scalar value according to default unit for a failure mode
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(String, int, double) - Method in interface nxopen.cae.aerostructures.author.OutputScalar
-
Set scalar value according to default unit for a failure mode and a loadcase specified by its index
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(String, double, Unit) - Method in interface nxopen.cae.aerostructures.author.OutputScalar
-
Set scalar value with a specific unit type for a failure mode
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(String, int, double, Unit) - Method in interface nxopen.cae.aerostructures.author.OutputScalar
-
Set scalar valuewith a specific unit type for a failure mode and a loadcase specified by its index
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(String) - Method in interface nxopen.cae.aerostructures.author.OutputText
-
Set text value.
- setValue(String, String) - Method in interface nxopen.cae.aerostructures.author.OutputText
-
Set text value for a failure mode
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(String, int, String) - Method in interface nxopen.cae.aerostructures.author.OutputText
-
Set text value for a failure mode and a loadcase specified by its index
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValue(double) - Method in interface nxopen.cae.ModelUpdateDesignVariable
-
Sets value
License requirements: nx_correl_update ("FE Model Update")
.
- setValue(CAEBody) - Method in interface nxopen.cae.SelectCAEBody
-
Sets the object being selected
License requirements: None.
- setValue(CAEBody, View, Point3d) - Method in interface nxopen.cae.SelectCAEBody
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(CAEEdge) - Method in interface nxopen.cae.SelectCAEEdge
-
Sets the object being selected
License requirements: None.
- setValue(CAEEdge, View, Point3d) - Method in interface nxopen.cae.SelectCAEEdge
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(CAEFace) - Method in interface nxopen.cae.SelectCAEFace
-
Sets the object being selected
License requirements: None.
- setValue(CAEFace, View, Point3d) - Method in interface nxopen.cae.SelectCAEFace
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(FENode) - Method in interface nxopen.cae.SelectFENode
-
Sets the object being selected
License requirements: None.
- setValue(FENode, View, Point3d) - Method in interface nxopen.cae.SelectFENode
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(SimConditionParam, double) - Method in interface nxopen.cae.SimCondition
-
Sets the condition specified parameter value.
- setValue(double) - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset
-
License requirements: cam_base ("CAM BASE")
.
- setValue(double) - Method in interface nxopen.cam.CutAngle
-
License requirements: cam_base ("CAM BASE")
.
- setValue(double) - Method in interface nxopen.cam.DimensionRule
-
License requirements: cam_base ("CAM BASE")
.
- setValue(double) - Method in interface nxopen.cam.ElementDoubleBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setValue(int) - Method in interface nxopen.cam.ElementIntBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setValue(String) - Method in interface nxopen.cam.ElementStringBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setValue(double) - Method in interface nxopen.cam.FinishDwell
-
License requirements: cam_base ("CAM BASE")
.
- setValue(double) - Method in interface nxopen.cam.InferredDouble
-
License requirements: cam_base ("CAM BASE")
.
- setValue(boolean) - Method in interface nxopen.cam.InheritableBoolBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setValue(double) - Method in interface nxopen.cam.InheritableDoubleBuilder
-
License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(double) - Method in interface nxopen.cam.InheritableFeedBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setValue(FeedRapidOutputMode) - Method in interface nxopen.cam.InheritableFeedModeBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setValue(int) - Method in interface nxopen.cam.InheritableIntBuilder
-
License requirements: cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(String) - Method in interface nxopen.cam.InheritableTextBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setValue(InspectionMethodBuilder.AxisExtrapolationTypes) - Method in interface nxopen.cam.InspectionAxisExtrapolationModeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(InspectionMethodBuilder.CylinderFittingTypes) - Method in interface nxopen.cam.InspectionCylinderCircleFitModeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(InspectionMethodBuilder.DatumPlaneFittingTypes) - Method in interface nxopen.cam.InspectionDatumPlaneFittingModeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(InspectionMethodBuilder.LimitsOfSizeTypes) - Method in interface nxopen.cam.InspectionLimitsOfSizeModeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(InspectionMoveBuilder.ProbeTipTypes) - Method in interface nxopen.cam.InspectionProbeTipTypeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(InspectionMethodBuilder.ProfileDispositionTypes) - Method in interface nxopen.cam.InspectionProfileDispositionModeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(InspectionMethodBuilder.ReferenceFeatureModeTypes) - Method in interface nxopen.cam.InspectionReferenceFeatureModeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(InspectionMoveBuilder.SensorStrategyTypes) - Method in interface nxopen.cam.InspectionSensorStrategyBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(InspectionMethodBuilder.SurfaceProfileTypes) - Method in interface nxopen.cam.InspectionSurfaceProfileModeBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setValue(boolean) - Method in interface nxopen.cam.OppositeDirection
-
License requirements: cam_base ("CAM BASE")
.
- setValue(CAMFeature) - Method in interface nxopen.cam.SelectCAMFeature
-
Sets the object being selected
License requirements: None.
- setValue(CAMFeature, View, Point3d) - Method in interface nxopen.cam.SelectCAMFeature
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(String) - Method in interface nxopen.diagramming.TitleBlockCellBuilder
-
License requirements: drafting ("DRAFTING")
.
- setValue(String) - Method in interface nxopen.drafting.AttributeItemBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setValue(DraftingView) - Method in interface nxopen.drawings.SelectDraftingView
-
Sets the object being selected
License requirements: None.
- setValue(DraftingView, View, Point3d) - Method in interface nxopen.drawings.SelectDraftingView
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(DrawingRegion) - Method in interface nxopen.drawings.SelectDrawingRegion
-
Sets the object being selected
License requirements: None.
- setValue(DrawingRegion, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingRegion
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(DrawingView) - Method in interface nxopen.drawings.SelectDrawingView
-
Sets the object being selected
License requirements: None.
- setValue(DrawingView, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingView
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(SectionLine) - Method in interface nxopen.drawings.SelectSectionLine
-
Sets the object being selected
License requirements: None.
- setValue(SectionLine, View, Point3d) - Method in interface nxopen.drawings.SelectSectionLine
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(double) - Method in interface nxopen.Expression
-
License requirements: None.
- setValue(FacetedBody) - Method in interface nxopen.facet.SelectFacetedBody
-
Sets the object being selected
License requirements: None.
- setValue(FacetedBody, View, Point3d) - Method in interface nxopen.facet.SelectFacetedBody
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(double) - Method in interface nxopen.features.CustomDoubleAttribute
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValue(Expression) - Method in interface nxopen.features.CustomExpressionAttribute
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValue(int) - Method in interface nxopen.features.CustomIntegerAttribute
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValue(boolean) - Method in interface nxopen.features.CustomLogicalAttribute
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValue(String) - Method in interface nxopen.features.CustomStringAttribute
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValue(TaggedObject) - Method in interface nxopen.features.CustomTagAttribute
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValue(Feature) - Method in interface nxopen.features.SelectFeature
-
Sets the object being selected
License requirements: None.
- setValue(Feature, View, Point3d) - Method in interface nxopen.features.SelectFeature
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(FlatPattern) - Method in interface nxopen.features.SelectFlatPattern
-
Sets the object being selected
License requirements: None.
- setValue(FlatPattern, View, Point3d) - Method in interface nxopen.features.SelectFlatPattern
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(PartModule) - Method in interface nxopen.features.SelectPartModule
-
Sets the object being selected
License requirements: None.
- setValue(PartModule, View, Point3d) - Method in interface nxopen.features.SelectPartModule
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(String) - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder
-
- setValue(String) - Method in interface nxopen.features.shipdesign.ShipNameFieldBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setValue(String) - Method in interface nxopen.geometricutilities.Extend
-
- setValue(Component) - Method in interface nxopen.layout2d.SelectComponent
-
Sets the object being selected
License requirements: None.
- setValue(Component, View, Point3d) - Method in interface nxopen.layout2d.SelectComponent
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(AdapterSignal) - Method in interface nxopen.mechatronics.SelectAdapterSignal
-
Sets the object being selected
License requirements: None.
- setValue(AdapterSignal, View, Point3d) - Method in interface nxopen.mechatronics.SelectAdapterSignal
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(CollisionSensor) - Method in interface nxopen.mechatronics.SelectCollisionSensor
-
Sets the object being selected
License requirements: None.
- setValue(CollisionSensor, View, Point3d) - Method in interface nxopen.mechatronics.SelectCollisionSensor
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(PhysicsConstraint) - Method in interface nxopen.mechatronics.SelectPhysicsConstraint
-
Sets the object being selected
License requirements: None.
- setValue(PhysicsConstraint, View, Point3d) - Method in interface nxopen.mechatronics.SelectPhysicsConstraint
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(PhysicsJoint) - Method in interface nxopen.mechatronics.SelectPhysicsJoint
-
Sets the object being selected
License requirements: None.
- setValue(PhysicsJoint, View, Point3d) - Method in interface nxopen.mechatronics.SelectPhysicsJoint
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(RigidBody) - Method in interface nxopen.mechatronics.SelectRigidBody
-
Sets the object being selected
License requirements: None.
- setValue(RigidBody, View, Point3d) - Method in interface nxopen.mechatronics.SelectRigidBody
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(SystemObject) - Method in interface nxopen.mechatronics.SelectSystemObject
-
Sets the object being selected
License requirements: None.
- setValue(SystemObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectSystemObject
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(TagFormObject) - Method in interface nxopen.mechatronics.SelectTagFormObject
-
Sets the object being selected
License requirements: None.
- setValue(TagFormObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectTagFormObject
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(AnalyticalContactProperty) - Method in interface nxopen.motion.SelectAnalyticalContactProperty
-
Sets the object being selected
License requirements: None.
- setValue(AnalyticalContactProperty, View, Point3d) - Method in interface nxopen.motion.SelectAnalyticalContactProperty
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(BaseSection) - Method in interface nxopen.motion.SelectBaseSection
-
Sets the object being selected
License requirements: None.
- setValue(BaseSection, View, Point3d) - Method in interface nxopen.motion.SelectBaseSection
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(ControlPort) - Method in interface nxopen.motion.SelectControlPort
-
Sets the object being selected
License requirements: None.
- setValue(ControlPort, View, Point3d) - Method in interface nxopen.motion.SelectControlPort
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(FieldData) - Method in interface nxopen.motion.SelectFieldData
-
Sets the object being selected
License requirements: None.
- setValue(FieldData, View, Point3d) - Method in interface nxopen.motion.SelectFieldData
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Joint) - Method in interface nxopen.motion.SelectJoint
-
Sets the object being selected
License requirements: None.
- setValue(Joint, View, Point3d) - Method in interface nxopen.motion.SelectJoint
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Link) - Method in interface nxopen.motion.SelectLink
-
Sets the object being selected
License requirements: None.
- setValue(Link, View, Point3d) - Method in interface nxopen.motion.SelectLink
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Marker) - Method in interface nxopen.motion.SelectMarker
-
Sets the object being selected
License requirements: None.
- setValue(Marker, View, Point3d) - Method in interface nxopen.motion.SelectMarker
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Road) - Method in interface nxopen.motion.SelectRoad
-
Sets the object being selected
License requirements: None.
- setValue(Road, View, Point3d) - Method in interface nxopen.motion.SelectRoad
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(SplineBeamProperty) - Method in interface nxopen.motion.SelectSplineBeamProperty
-
Sets the object being selected
License requirements: None.
- setValue(SplineBeamProperty, View, Point3d) - Method in interface nxopen.motion.SelectSplineBeamProperty
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(TirePropertyBasic) - Method in interface nxopen.motion.SelectTirePropertyBasic
-
Sets the object being selected
License requirements: None.
- setValue(TirePropertyBasic, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyBasic
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(TirePropertyCd) - Method in interface nxopen.motion.SelectTirePropertyCd
-
Sets the object being selected
License requirements: None.
- setValue(TirePropertyCd, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyCd
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(TirePropertyFt) - Method in interface nxopen.motion.SelectTirePropertyFt
-
Sets the object being selected
License requirements: None.
- setValue(TirePropertyFt, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyFt
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(TirePropertyMotorcycle) - Method in interface nxopen.motion.SelectTirePropertyMotorcycle
-
Sets the object being selected
License requirements: None.
- setValue(TirePropertyMotorcycle, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyMotorcycle
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(TirePropertyNonInertial) - Method in interface nxopen.motion.SelectTirePropertyNonInertial
-
Sets the object being selected
License requirements: None.
- setValue(TirePropertyNonInertial, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyNonInertial
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(TirePropertyTno) - Method in interface nxopen.motion.SelectTirePropertyTno
-
Sets the object being selected
License requirements: None.
- setValue(TirePropertyTno, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyTno
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(String, int) - Method in interface nxopen.options.ChangeList
-
- setValue(String, double) - Method in interface nxopen.options.ChangeList
-
- setValue(String, String) - Method in interface nxopen.options.ChangeList
-
- setValue(String, String[]) - Method in interface nxopen.options.ChangeList
-
- setValue(String, boolean) - Method in interface nxopen.options.ChangeList
-
- setValue(String, int) - Method in interface nxopen.options.DraftingStandardChangeList
-
- setValue(String, double) - Method in interface nxopen.options.DraftingStandardChangeList
-
- setValue(String, String) - Method in interface nxopen.options.DraftingStandardChangeList
-
- setValue(String, String[]) - Method in interface nxopen.options.DraftingStandardChangeList
-
- setValue(String, boolean) - Method in interface nxopen.options.DraftingStandardChangeList
-
- setValue(ControlPoint) - Method in interface nxopen.routing.SelectControlPoint
-
Sets the object being selected
License requirements: None.
- setValue(ControlPoint, View, Point3d) - Method in interface nxopen.routing.SelectControlPoint
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(ISegment) - Method in interface nxopen.routing.SelectISegment
-
Sets the object being selected
License requirements: None.
- setValue(ISegment, View, Point3d) - Method in interface nxopen.routing.SelectISegment
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(LineSegment) - Method in interface nxopen.routing.SelectLineSegment
-
Sets the object being selected
License requirements: None.
- setValue(LineSegment, View, Point3d) - Method in interface nxopen.routing.SelectLineSegment
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Port) - Method in interface nxopen.routing.SelectPort
-
Sets the object being selected
License requirements: None.
- setValue(Port, View, Point3d) - Method in interface nxopen.routing.SelectPort
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Run) - Method in interface nxopen.routing.SelectRun
-
Sets the object being selected
License requirements: None.
- setValue(Run, View, Point3d) - Method in interface nxopen.routing.SelectRun
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Stock) - Method in interface nxopen.routing.SelectStock
-
Sets the object being selected
License requirements: None.
- setValue(Stock, View, Point3d) - Method in interface nxopen.routing.SelectStock
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(double) - Method in interface nxopen.Scalar
-
License requirements: None.
- setValue(Body) - Method in interface nxopen.SelectBody
-
Sets the object being selected
License requirements: None.
- setValue(Body, View, Point3d) - Method in interface nxopen.SelectBody
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(CartesianCoordinateSystem) - Method in interface nxopen.SelectCartesianCoordinateSystem
-
Sets the object being selected
License requirements: None.
- setValue(CartesianCoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCartesianCoordinateSystem
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(CoordinateSystem) - Method in interface nxopen.SelectCoordinateSystem
-
Sets the object being selected
License requirements: None.
- setValue(CoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCoordinateSystem
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Curve) - Method in interface nxopen.SelectCurve
-
Sets the object being selected
License requirements: None.
- setValue(Curve, View, Point3d) - Method in interface nxopen.SelectCurve
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(DatumPlane) - Method in interface nxopen.SelectDatumPlane
-
Sets the object being selected
License requirements: None.
- setValue(DatumPlane, View, Point3d) - Method in interface nxopen.SelectDatumPlane
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(DisplayableObject) - Method in interface nxopen.SelectDisplayableObject
-
Sets the object being selected
License requirements: None.
- setValue(DisplayableObject, View, Point3d) - Method in interface nxopen.SelectDisplayableObject
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Edge) - Method in interface nxopen.SelectEdge
-
Sets the object being selected
License requirements: None.
- setValue(Edge, View, Point3d) - Method in interface nxopen.SelectEdge
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Face) - Method in interface nxopen.SelectFace
-
Sets the object being selected
License requirements: None.
- setValue(Face, View, Point3d) - Method in interface nxopen.SelectFace
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Group) - Method in interface nxopen.SelectGroup
-
Sets the object being selected
License requirements: None.
- setValue(Group, View, Point3d) - Method in interface nxopen.SelectGroup
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(IBaseCurve) - Method in interface nxopen.SelectIBaseCurve
-
Sets the object being selected
License requirements: None.
- setValue(IBaseCurve, View, Point3d) - Method in interface nxopen.SelectIBaseCurve
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(IBody) - Method in interface nxopen.SelectIBody
-
Sets the object being selected
License requirements: None.
- setValue(IBody, View, Point3d) - Method in interface nxopen.SelectIBody
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(ICurve) - Method in interface nxopen.SelectICurve
-
Sets the object being selected
License requirements: None.
- setValue(ICurve, View, Point3d) - Method in interface nxopen.SelectICurve
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(IParameterizedSurface) - Method in interface nxopen.SelectIParameterizedSurface
-
Sets the object being selected
License requirements: None.
- setValue(IParameterizedSurface, View, Point3d) - Method in interface nxopen.SelectIParameterizedSurface
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(IReferenceAxis) - Method in interface nxopen.SelectIReferenceAxis
-
Sets the object being selected
License requirements: None.
- setValue(IReferenceAxis, View, Point3d) - Method in interface nxopen.SelectIReferenceAxis
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(ISurface) - Method in interface nxopen.SelectISurface
-
Sets the object being selected
License requirements: None.
- setValue(ISurface, View, Point3d) - Method in interface nxopen.SelectISurface
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Line) - Method in interface nxopen.SelectLine
-
Sets the object being selected
License requirements: None.
- setValue(Line, View, Point3d) - Method in interface nxopen.SelectLine
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(NXObject) - Method in interface nxopen.SelectNXObject
-
Sets the object being selected
License requirements: None.
- setValue(NXObject, View, Point3d) - Method in interface nxopen.SelectNXObject
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(TaggedObject) - Method in interface nxopen.SelectObject
-
Sets the object being selected
License requirements: None.
- setValue(TaggedObject, View, Point3d) - Method in interface nxopen.SelectObject
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Part) - Method in interface nxopen.SelectPart
-
Sets the object being selected
License requirements: None.
- setValue(Part, View, Point3d) - Method in interface nxopen.SelectPart
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Point) - Method in interface nxopen.SelectPoint
-
Sets the object being selected
License requirements: None.
- setValue(Point, View, Point3d) - Method in interface nxopen.SelectPoint
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Sketch) - Method in interface nxopen.SelectSketch
-
Sets the object being selected
License requirements: None.
- setValue(Sketch, View, Point3d) - Method in interface nxopen.SelectSketch
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(SmartObject) - Method in interface nxopen.SelectSmartObject
-
Sets the object being selected
License requirements: None.
- setValue(SmartObject, View, Point3d) - Method in interface nxopen.SelectSmartObject
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(Spline) - Method in interface nxopen.SelectSpline
-
Sets the object being selected
License requirements: None.
- setValue(Spline, View, Point3d) - Method in interface nxopen.SelectSpline
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(TaggedObject) - Method in interface nxopen.SelectTaggedObject
-
Sets the object being selected
License requirements: None.
- setValue(TaggedObject, View, Point3d) - Method in interface nxopen.SelectTaggedObject
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(View) - Method in interface nxopen.SelectView
-
Sets the object being selected
License requirements: None.
- setValue(View, View, Point3d) - Method in interface nxopen.SelectView
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(int) - Method in interface nxopen.uistyler.SelectionBox
-
Sets the value
License requirements: None.
- setValue(String) - Method in interface nxopen.visualreporting.Condition
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setValue(String) - Method in interface nxopen.visualreporting.GroupLabel
-
License requirements: nx_visual_reporting ("Visual Reporting")
.
- setValue(DatumPin) - Method in interface nxopen.weld.SelectDatumPin
-
Sets the object being selected
License requirements: None.
- setValue(DatumPin, View, Point3d) - Method in interface nxopen.weld.SelectDatumPin
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue(DatumSurface) - Method in interface nxopen.weld.SelectDatumSurface
-
Sets the object being selected
License requirements: None.
- setValue(DatumSurface, View, Point3d) - Method in interface nxopen.weld.SelectDatumSurface
-
The object being selected with the object's view and object's point
License requirements: None.
- setValue0(double) - Method in interface nxopen.cam.Inheritable2dLength
-
License requirements: cam_base ("CAM BASE")
.
- setValue1(double) - Method in interface nxopen.cam.Inheritable2dLength
-
License requirements: cam_base ("CAM BASE")
.
- setValueA(double) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setValueAlias(String) - Method in interface nxopen.AttributePropertiesBaseBuilder
-
License requirements: None.
- setValueAsBoolean(boolean) - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueAsComplex(Complex) - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueAsComponent(PostScenarioVariantComponent) - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueAsDouble(double) - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueAsInteger(int) - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueAsModeDescription(PostScenarioModeDescription) - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueAsString(String) - Method in interface nxopen.blockstyler.Enumeration
-
License requirements: None.
- setValueAsString(String) - Method in interface nxopen.blockstyler.LineFont
-
License requirements: None.
- setValueAsString(String) - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueAsUnary() - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueAsUnicodeString(String) - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueAsVector3d(Vector3d) - Method in interface nxopen.cae.PostScenarioVariant
-
Set a typed value.
- setValueB(double) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setValueC(double) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setValueChanged(boolean) - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
License requirements: ugweld ("UG WELD")
.
- setValueD(double) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setValueDisplayFlag(boolean) - Method in interface nxopen.cae.SimBCDisplay
-
Sets the true/false flag based on whether the value of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setValueDouble(double) - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
License requirements: ugweld ("UG WELD")
.
- setValueE(double) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setValueF(double) - Method in interface nxopen.features.GeneralConicBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- setValueFormat(ScaleValueFormatTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setValueFormat(ScaleValueFormatTypes) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setValueFormat(ScaleValueFormatTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setValueFromString(String) - Method in interface nxopen.display.IrayPlusMaterialAttribute
-
Sets attribute's value for specific attribute object.
- setValueInteger(int) - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
License requirements: ugweld ("UG WELD")
.
- setValueOfAttribute(FamilyAttribute, String) - Method in interface nxopen.partfamily.InstanceDefinition
-
Set the value for passed atribute with the value
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValueOfCondition(Condition, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setValueOfGroupLabel(GroupLabel, String) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- setValueOption(ResizeCurveBuilder.ValueType) - Method in interface nxopen.features.ResizeCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValueOrder(String, String[]) - Method in interface nxopen.options.ChangeList
-
- setValueOrder(String, String[]) - Method in interface nxopen.options.DraftingStandardChangeList
-
- setValuePrecision(AutoDimensionBuilder.ValuePrecisionType) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setValueReduction(double) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setValues(int, int, double[]) - Method in interface nxopen.blockstyler.DoubleTable
-
Sets the Values in table
License requirements: None.
- setValues(int, int, int[]) - Method in interface nxopen.blockstyler.IntegerTable
-
Sets the Values
License requirements: None.
- setValues(String[], double[]) - Method in interface nxopen.cae.aerostructures.ManualLoadExtraction
-
Set values
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setValues(double[]) - Method in interface nxopen.features.CustomDoubleArrayAttribute
-
Set the double values in attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValues(Expression[]) - Method in interface nxopen.features.CustomExpressionArrayAttribute
-
Set the expressions in the attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValues(int[]) - Method in interface nxopen.features.CustomIntegerArrayAttribute
-
Set the integer values to the attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValues(boolean[]) - Method in interface nxopen.features.CustomLogicalArrayAttribute
-
Set the logical values in the attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValues(String[]) - Method in interface nxopen.features.CustomStringArrayAttribute
-
Set the String values in the attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValues(TaggedObject[]) - Method in interface nxopen.features.CustomTagArrayAttribute
-
Set the references in the attribute and returns old references
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setValuesApplyOption(EdgePrepValuesBuilder.Apply) - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setValuesConcatenated(String) - Method in interface nxopen.blockstyler.MultilineString
-
License requirements: None.
- setValueSelection(String, boolean[], String[]) - Method in interface nxopen.options.ChangeList
-
- setValueSelection(String, boolean[], String[]) - Method in interface nxopen.options.DraftingStandardChangeList
-
- setValuesInitial(double) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setValuesOption(EdgePrepValuesBuilder.Option) - Method in interface nxopen.weld.EdgePrepValuesBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setValuesOutsideTableInterpolation(FieldEvaluator.ValuesOutsideTableInterpolationEnum) - Method in interface nxopen.fields.FieldLinksTable
-
License requirements: None.
- setValuesOutsideTableInterpolation(FieldEvaluator.ValuesOutsideTableInterpolationEnum) - Method in interface nxopen.fields.FieldReference
-
License requirements: None.
- setValuesOutsideTableInterpolation(FieldEvaluator.ValuesOutsideTableInterpolationEnum) - Method in interface nxopen.fields.FieldTable
-
License requirements: None.
- setValuesPeak(double) - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setValueString(String) - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
License requirements: ugweld ("UG WELD")
.
- setValueType(ForceValueTypes) - Method in interface nxopen.motion.ScalarForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setValueType(ForceValueTypes) - Method in interface nxopen.motion.ScalarTorqueBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setValueType(ForceValueTypes) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setValueWithCaeSetObjectInfo(AMEBaseNode, CaeObjectType.CaeSubType, int) - Method in interface nxopen.ame.SelectAMEBaseNode
-
- setValueWithCaeSetObjectInfo(AMEBaseNode, CaeObjectType.CaeSubType, int) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
- setValueWithCaeSetObjectInfo(AMEExtendedObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.ame.SelectAMEExtendedObject
-
- setValueWithCaeSetObjectInfo(AMEPort, CaeObjectType.CaeSubType, int) - Method in interface nxopen.ame.SelectAMEPort
-
- setValueWithCaeSetObjectInfo(AspectNode, CaeObjectType.CaeSubType, int) - Method in interface nxopen.ame.SelectAspectNode
-
- setValueWithCaeSetObjectInfo(Annotation, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectAnnotation
-
- setValueWithCaeSetObjectInfo(Annotation, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectAnnotationList
-
- setValueWithCaeSetObjectInfo(BaseCustomSymbol, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
- setValueWithCaeSetObjectInfo(Dimension, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectDimension
-
- setValueWithCaeSetObjectInfo(OrdinateDimension, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
- setValueWithCaeSetObjectInfo(TableSection, CaeObjectType.CaeSubType, int) - Method in interface nxopen.annotations.SelectTableSectionList
-
- setValueWithCaeSetObjectInfo(Component, CaeObjectType.CaeSubType, int) - Method in interface nxopen.assemblies.SelectComponent
-
- setValueWithCaeSetObjectInfo(Component, CaeObjectType.CaeSubType, int) - Method in interface nxopen.assemblies.SelectComponentList
-
- setValueWithCaeSetObjectInfo(CAEBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEBody
-
- setValueWithCaeSetObjectInfo(CAEBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEBodyList
-
- setValueWithCaeSetObjectInfo(CAEEdge, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEEdge
-
- setValueWithCaeSetObjectInfo(CAEEdge, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEEdgeList
-
- setValueWithCaeSetObjectInfo(CAEFace, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEFace
-
- setValueWithCaeSetObjectInfo(CAEFace, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectCAEFaceList
-
- setValueWithCaeSetObjectInfo(FEElemFace, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectFEElemFaceList
-
- setValueWithCaeSetObjectInfo(FENode, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectFENode
-
- setValueWithCaeSetObjectInfo(FENode, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectFENodeList
-
- setValueWithCaeSetObjectInfo(Mesh, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cae.SelectMeshList
-
- setValueWithCaeSetObjectInfo(CAMFeature, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cam.SelectCAMFeature
-
- setValueWithCaeSetObjectInfo(CAMFeature, CaeObjectType.CaeSubType, int) - Method in interface nxopen.cam.SelectCAMFeatureList
-
- setValueWithCaeSetObjectInfo(DraftingView, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDraftingView
-
- setValueWithCaeSetObjectInfo(DraftingView, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDraftingViewList
-
- setValueWithCaeSetObjectInfo(DrawingRegion, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDrawingRegion
-
- setValueWithCaeSetObjectInfo(DrawingView, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDrawingView
-
- setValueWithCaeSetObjectInfo(DrawingView, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectDrawingViewList
-
- setValueWithCaeSetObjectInfo(SectionLine, CaeObjectType.CaeSubType, int) - Method in interface nxopen.drawings.SelectSectionLine
-
- setValueWithCaeSetObjectInfo(FacetedBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.facet.SelectFacetedBody
-
- setValueWithCaeSetObjectInfo(FacetedBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.facet.SelectFacetedBodyList
-
- setValueWithCaeSetObjectInfo(BodyFeature, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectBodyFeatureList
-
- setValueWithCaeSetObjectInfo(DatumCsys, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectDatumCsysList
-
- setValueWithCaeSetObjectInfo(Feature, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectFeature
-
- setValueWithCaeSetObjectInfo(Feature, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectFeatureList
-
- setValueWithCaeSetObjectInfo(FlatPattern, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectFlatPattern
-
- setValueWithCaeSetObjectInfo(PartModule, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.SelectPartModule
-
- setValueWithCaeSetObjectInfo(SubdivisionBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
- setValueWithCaeSetObjectInfo(Component, CaeObjectType.CaeSubType, int) - Method in interface nxopen.layout2d.SelectComponent
-
- setValueWithCaeSetObjectInfo(Component, CaeObjectType.CaeSubType, int) - Method in interface nxopen.layout2d.SelectComponentList
-
- setValueWithCaeSetObjectInfo(AdapterSignal, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectAdapterSignal
-
- setValueWithCaeSetObjectInfo(CollisionSensor, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectCollisionSensor
-
- setValueWithCaeSetObjectInfo(CollisionSensor, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
- setValueWithCaeSetObjectInfo(HydraulicCylinder, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
- setValueWithCaeSetObjectInfo(LogicObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
- setValueWithCaeSetObjectInfo(PhysicsConstraint, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectPhysicsConstraint
-
- setValueWithCaeSetObjectInfo(PhysicsJoint, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectPhysicsJoint
-
- setValueWithCaeSetObjectInfo(PneumaticCylinder, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
- setValueWithCaeSetObjectInfo(RigidBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectRigidBody
-
- setValueWithCaeSetObjectInfo(SystemObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectSystemObject
-
- setValueWithCaeSetObjectInfo(TagFormObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.mechatronics.SelectTagFormObject
-
- setValueWithCaeSetObjectInfo(AnalyticalContactProperty, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectAnalyticalContactProperty
-
- setValueWithCaeSetObjectInfo(BaseSection, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectBaseSection
-
- setValueWithCaeSetObjectInfo(ControlPort, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectControlPort
-
- setValueWithCaeSetObjectInfo(FieldData, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectFieldData
-
- setValueWithCaeSetObjectInfo(Joint, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectJoint
-
- setValueWithCaeSetObjectInfo(Link, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectLink
-
- setValueWithCaeSetObjectInfo(Marker, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectMarker
-
- setValueWithCaeSetObjectInfo(Road, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectRoad
-
- setValueWithCaeSetObjectInfo(SplineBeamProperty, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectSplineBeamProperty
-
- setValueWithCaeSetObjectInfo(TirePropertyBasic, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyBasic
-
- setValueWithCaeSetObjectInfo(TirePropertyCd, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyCd
-
- setValueWithCaeSetObjectInfo(TirePropertyFt, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyFt
-
- setValueWithCaeSetObjectInfo(TirePropertyMotorcycle, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyMotorcycle
-
- setValueWithCaeSetObjectInfo(TirePropertyNonInertial, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyNonInertial
-
- setValueWithCaeSetObjectInfo(TirePropertyTno, CaeObjectType.CaeSubType, int) - Method in interface nxopen.motion.SelectTirePropertyTno
-
- setValueWithCaeSetObjectInfo(ControlPoint, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectControlPoint
-
- setValueWithCaeSetObjectInfo(ISegment, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectISegment
-
- setValueWithCaeSetObjectInfo(LineSegment, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectLineSegment
-
- setValueWithCaeSetObjectInfo(Port, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectPort
-
- setValueWithCaeSetObjectInfo(Run, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectRun
-
- setValueWithCaeSetObjectInfo(Stock, CaeObjectType.CaeSubType, int) - Method in interface nxopen.routing.SelectStock
-
- setValueWithCaeSetObjectInfo(Body, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectBody
-
- setValueWithCaeSetObjectInfo(Body, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectBodyList
-
- setValueWithCaeSetObjectInfo(CartesianCoordinateSystem, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCartesianCoordinateSystem
-
- setValueWithCaeSetObjectInfo(CoordinateSystem, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCoordinateSystem
-
- setValueWithCaeSetObjectInfo(CoordinateSystem, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCoordinateSystemList
-
- setValueWithCaeSetObjectInfo(Curve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCurve
-
- setValueWithCaeSetObjectInfo(Curve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectCurveList
-
- setValueWithCaeSetObjectInfo(DatumPlane, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectDatumPlane
-
- setValueWithCaeSetObjectInfo(DatumPlane, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectDatumPlaneList
-
- setValueWithCaeSetObjectInfo(DisplayableObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectDisplayableObject
-
- setValueWithCaeSetObjectInfo(DisplayableObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectDisplayableObjectList
-
- setValueWithCaeSetObjectInfo(Edge, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectEdge
-
- setValueWithCaeSetObjectInfo(Edge, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectEdgeList
-
- setValueWithCaeSetObjectInfo(Expression, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectExpressionList
-
- setValueWithCaeSetObjectInfo(Face, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectFace
-
- setValueWithCaeSetObjectInfo(Face, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectFaceList
-
- setValueWithCaeSetObjectInfo(Group, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectGroup
-
- setValueWithCaeSetObjectInfo(IBaseCurve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIBaseCurve
-
- setValueWithCaeSetObjectInfo(IBaseCurve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIBaseCurveList
-
- setValueWithCaeSetObjectInfo(IBasePlane, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIBasePlaneList
-
- setValueWithCaeSetObjectInfo(IBody, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIBody
-
- setValueWithCaeSetObjectInfo(ICurve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectICurve
-
- setValueWithCaeSetObjectInfo(ICurve, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectICurveList
-
- setValueWithCaeSetObjectInfo(INXObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectINXObjectList
-
- setValueWithCaeSetObjectInfo(IParameterizedSurface, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIParameterizedSurface
-
- setValueWithCaeSetObjectInfo(IParameterizedSurface, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
- setValueWithCaeSetObjectInfo(IReferenceAxis, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectIReferenceAxis
-
- setValueWithCaeSetObjectInfo(ISurface, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectISurface
-
- setValueWithCaeSetObjectInfo(Line, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectLine
-
- setValueWithCaeSetObjectInfo(ModelingView, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectModelingViewList
-
- setValueWithCaeSetObjectInfo(NXObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectNXObject
-
- setValueWithCaeSetObjectInfo(NXObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectNXObjectList
-
- setValueWithCaeSetObjectInfo(TaggedObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectObject
-
- setValueWithCaeSetObjectInfo(TaggedObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectObjectList
-
- setValueWithCaeSetObjectInfo(Part, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectPart
-
- setValueWithCaeSetObjectInfo(Part, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectPartList
-
- setValueWithCaeSetObjectInfo(Point, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectPoint
-
- setValueWithCaeSetObjectInfo(Point, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectPointList
-
- setValueWithCaeSetObjectInfo(Sketch, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectSketch
-
- setValueWithCaeSetObjectInfo(SmartObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectSmartObject
-
- setValueWithCaeSetObjectInfo(Spline, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectSpline
-
- setValueWithCaeSetObjectInfo(Spline, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectSplineList
-
- setValueWithCaeSetObjectInfo(TaggedObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectTaggedObject
-
- setValueWithCaeSetObjectInfo(TaggedObject, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectTaggedObjectList
-
- setValueWithCaeSetObjectInfo(View, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectView
-
- setValueWithCaeSetObjectInfo(View, CaeObjectType.CaeSubType, int) - Method in interface nxopen.SelectViewList
-
- setValueWithCaeSetObjectInfo(DatumPin, CaeObjectType.CaeSubType, int) - Method in interface nxopen.weld.SelectDatumPin
-
- setValueWithCaeSetObjectInfo(DatumSurface, CaeObjectType.CaeSubType, int) - Method in interface nxopen.weld.SelectDatumSurface
-
- setValueWithSnap(InferSnapType.SnapType, AMEBaseNode, View, Point3d, AMEBaseNode, View, Point3d) - Method in interface nxopen.ame.SelectAMEBaseNode
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, AMEBaseNode, View, Point3d, AMEBaseNode, View, Point3d) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, AMEExtendedObject, View, Point3d, AMEExtendedObject, View, Point3d) - Method in interface nxopen.ame.SelectAMEExtendedObject
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, AMEPort, View, Point3d, AMEPort, View, Point3d) - Method in interface nxopen.ame.SelectAMEPort
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, AspectNode, View, Point3d, AspectNode, View, Point3d) - Method in interface nxopen.ame.SelectAspectNode
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Annotation, View, Point3d, Annotation, View, Point3d) - Method in interface nxopen.annotations.SelectAnnotation
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Annotation, View, Point3d, Annotation, View, Point3d) - Method in interface nxopen.annotations.SelectAnnotationList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, BaseCustomSymbol, View, Point3d, BaseCustomSymbol, View, Point3d) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Dimension, View, Point3d, Dimension, View, Point3d) - Method in interface nxopen.annotations.SelectDimension
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, OrdinateDimension, View, Point3d, OrdinateDimension, View, Point3d) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TableSection, View, Point3d, TableSection, View, Point3d) - Method in interface nxopen.annotations.SelectTableSectionList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.assemblies.SelectComponent
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.assemblies.SelectComponentList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CAEBody, View, Point3d, CAEBody, View, Point3d) - Method in interface nxopen.cae.SelectCAEBody
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CAEBody, View, Point3d, CAEBody, View, Point3d) - Method in interface nxopen.cae.SelectCAEBodyList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CAEEdge, View, Point3d, CAEEdge, View, Point3d) - Method in interface nxopen.cae.SelectCAEEdge
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CAEEdge, View, Point3d, CAEEdge, View, Point3d) - Method in interface nxopen.cae.SelectCAEEdgeList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CAEFace, View, Point3d, CAEFace, View, Point3d) - Method in interface nxopen.cae.SelectCAEFace
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CAEFace, View, Point3d, CAEFace, View, Point3d) - Method in interface nxopen.cae.SelectCAEFaceList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, FEElemFace, View, Point3d, FEElemFace, View, Point3d) - Method in interface nxopen.cae.SelectFEElemFaceList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, FENode, View, Point3d, FENode, View, Point3d) - Method in interface nxopen.cae.SelectFENode
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, FENode, View, Point3d, FENode, View, Point3d) - Method in interface nxopen.cae.SelectFENodeList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Mesh, View, Point3d, Mesh, View, Point3d) - Method in interface nxopen.cae.SelectMeshList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CAMFeature, View, Point3d, CAMFeature, View, Point3d) - Method in interface nxopen.cam.SelectCAMFeature
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CAMFeature, View, Point3d, CAMFeature, View, Point3d) - Method in interface nxopen.cam.SelectCAMFeatureList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DraftingView, View, Point3d, DraftingView, View, Point3d) - Method in interface nxopen.drawings.SelectDraftingView
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DraftingView, View, Point3d, DraftingView, View, Point3d) - Method in interface nxopen.drawings.SelectDraftingViewList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DrawingRegion, View, Point3d, DrawingRegion, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingRegion
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DrawingView, View, Point3d, DrawingView, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingView
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DrawingView, View, Point3d, DrawingView, View, Point3d) - Method in interface nxopen.drawings.SelectDrawingViewList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, SectionLine, View, Point3d, SectionLine, View, Point3d) - Method in interface nxopen.drawings.SelectSectionLine
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, FacetedBody, View, Point3d, FacetedBody, View, Point3d) - Method in interface nxopen.facet.SelectFacetedBody
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, FacetedBody, View, Point3d, FacetedBody, View, Point3d) - Method in interface nxopen.facet.SelectFacetedBodyList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, BodyFeature, View, Point3d, BodyFeature, View, Point3d) - Method in interface nxopen.features.SelectBodyFeatureList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DatumCsys, View, Point3d, DatumCsys, View, Point3d) - Method in interface nxopen.features.SelectDatumCsysList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Feature, View, Point3d, Feature, View, Point3d) - Method in interface nxopen.features.SelectFeature
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Feature, View, Point3d, Feature, View, Point3d) - Method in interface nxopen.features.SelectFeatureList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, FlatPattern, View, Point3d, FlatPattern, View, Point3d) - Method in interface nxopen.features.SelectFlatPattern
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, PartModule, View, Point3d, PartModule, View, Point3d) - Method in interface nxopen.features.SelectPartModule
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, SubdivisionBody, View, Point3d, SubdivisionBody, View, Point3d) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.layout2d.SelectComponent
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Component, View, Point3d, Component, View, Point3d) - Method in interface nxopen.layout2d.SelectComponentList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, AdapterSignal, View, Point3d, AdapterSignal, View, Point3d) - Method in interface nxopen.mechatronics.SelectAdapterSignal
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CollisionSensor, View, Point3d, CollisionSensor, View, Point3d) - Method in interface nxopen.mechatronics.SelectCollisionSensor
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CollisionSensor, View, Point3d, CollisionSensor, View, Point3d) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, HydraulicCylinder, View, Point3d, HydraulicCylinder, View, Point3d) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, LogicObject, View, Point3d, LogicObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, PhysicsConstraint, View, Point3d, PhysicsConstraint, View, Point3d) - Method in interface nxopen.mechatronics.SelectPhysicsConstraint
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, PhysicsJoint, View, Point3d, PhysicsJoint, View, Point3d) - Method in interface nxopen.mechatronics.SelectPhysicsJoint
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, PneumaticCylinder, View, Point3d, PneumaticCylinder, View, Point3d) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, RigidBody, View, Point3d, RigidBody, View, Point3d) - Method in interface nxopen.mechatronics.SelectRigidBody
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, SystemObject, View, Point3d, SystemObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectSystemObject
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TagFormObject, View, Point3d, TagFormObject, View, Point3d) - Method in interface nxopen.mechatronics.SelectTagFormObject
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, AnalyticalContactProperty, View, Point3d, AnalyticalContactProperty, View, Point3d) - Method in interface nxopen.motion.SelectAnalyticalContactProperty
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, BaseSection, View, Point3d, BaseSection, View, Point3d) - Method in interface nxopen.motion.SelectBaseSection
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, ControlPort, View, Point3d, ControlPort, View, Point3d) - Method in interface nxopen.motion.SelectControlPort
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, FieldData, View, Point3d, FieldData, View, Point3d) - Method in interface nxopen.motion.SelectFieldData
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Joint, View, Point3d, Joint, View, Point3d) - Method in interface nxopen.motion.SelectJoint
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Link, View, Point3d, Link, View, Point3d) - Method in interface nxopen.motion.SelectLink
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Marker, View, Point3d, Marker, View, Point3d) - Method in interface nxopen.motion.SelectMarker
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Road, View, Point3d, Road, View, Point3d) - Method in interface nxopen.motion.SelectRoad
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, SplineBeamProperty, View, Point3d, SplineBeamProperty, View, Point3d) - Method in interface nxopen.motion.SelectSplineBeamProperty
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TirePropertyBasic, View, Point3d, TirePropertyBasic, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyBasic
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TirePropertyCd, View, Point3d, TirePropertyCd, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyCd
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TirePropertyFt, View, Point3d, TirePropertyFt, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyFt
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TirePropertyMotorcycle, View, Point3d, TirePropertyMotorcycle, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyMotorcycle
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TirePropertyNonInertial, View, Point3d, TirePropertyNonInertial, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyNonInertial
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TirePropertyTno, View, Point3d, TirePropertyTno, View, Point3d) - Method in interface nxopen.motion.SelectTirePropertyTno
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, ControlPoint, View, Point3d, ControlPoint, View, Point3d) - Method in interface nxopen.routing.SelectControlPoint
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, ISegment, View, Point3d, ISegment, View, Point3d) - Method in interface nxopen.routing.SelectISegment
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, LineSegment, View, Point3d, LineSegment, View, Point3d) - Method in interface nxopen.routing.SelectLineSegment
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Port, View, Point3d, Port, View, Point3d) - Method in interface nxopen.routing.SelectPort
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Run, View, Point3d, Run, View, Point3d) - Method in interface nxopen.routing.SelectRun
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Stock, View, Point3d, Stock, View, Point3d) - Method in interface nxopen.routing.SelectStock
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Body, View, Point3d, Body, View, Point3d) - Method in interface nxopen.SelectBody
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Body, View, Point3d, Body, View, Point3d) - Method in interface nxopen.SelectBodyList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CartesianCoordinateSystem, View, Point3d, CartesianCoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCartesianCoordinateSystem
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CoordinateSystem, View, Point3d, CoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCoordinateSystem
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, CoordinateSystem, View, Point3d, CoordinateSystem, View, Point3d) - Method in interface nxopen.SelectCoordinateSystemList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Curve, View, Point3d, Curve, View, Point3d) - Method in interface nxopen.SelectCurve
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Curve, View, Point3d, Curve, View, Point3d) - Method in interface nxopen.SelectCurveList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DatumPlane, View, Point3d, DatumPlane, View, Point3d) - Method in interface nxopen.SelectDatumPlane
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DatumPlane, View, Point3d, DatumPlane, View, Point3d) - Method in interface nxopen.SelectDatumPlaneList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DisplayableObject, View, Point3d, DisplayableObject, View, Point3d) - Method in interface nxopen.SelectDisplayableObject
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DisplayableObject, View, Point3d, DisplayableObject, View, Point3d) - Method in interface nxopen.SelectDisplayableObjectList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Edge, View, Point3d, Edge, View, Point3d) - Method in interface nxopen.SelectEdge
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Edge, View, Point3d, Edge, View, Point3d) - Method in interface nxopen.SelectEdgeList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Expression, View, Point3d, Expression, View, Point3d) - Method in interface nxopen.SelectExpressionList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Face, View, Point3d, Face, View, Point3d) - Method in interface nxopen.SelectFace
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Face, View, Point3d, Face, View, Point3d) - Method in interface nxopen.SelectFaceList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Group, View, Point3d, Group, View, Point3d) - Method in interface nxopen.SelectGroup
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, IBaseCurve, View, Point3d, IBaseCurve, View, Point3d) - Method in interface nxopen.SelectIBaseCurve
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, IBaseCurve, View, Point3d, IBaseCurve, View, Point3d) - Method in interface nxopen.SelectIBaseCurveList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, IBasePlane, View, Point3d, IBasePlane, View, Point3d) - Method in interface nxopen.SelectIBasePlaneList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, IBody, View, Point3d, IBody, View, Point3d) - Method in interface nxopen.SelectIBody
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, ICurve, View, Point3d, ICurve, View, Point3d) - Method in interface nxopen.SelectICurve
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, ICurve, View, Point3d, ICurve, View, Point3d) - Method in interface nxopen.SelectICurveList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, INXObject, View, Point3d, INXObject, View, Point3d) - Method in interface nxopen.SelectINXObjectList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, IParameterizedSurface, View, Point3d, IParameterizedSurface, View, Point3d) - Method in interface nxopen.SelectIParameterizedSurface
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, IParameterizedSurface, View, Point3d, IParameterizedSurface, View, Point3d) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, IReferenceAxis, View, Point3d, IReferenceAxis, View, Point3d) - Method in interface nxopen.SelectIReferenceAxis
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, ISurface, View, Point3d, ISurface, View, Point3d) - Method in interface nxopen.SelectISurface
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Line, View, Point3d, Line, View, Point3d) - Method in interface nxopen.SelectLine
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, ModelingView, View, Point3d, ModelingView, View, Point3d) - Method in interface nxopen.SelectModelingViewList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, NXObject, View, Point3d, NXObject, View, Point3d) - Method in interface nxopen.SelectNXObject
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, NXObject, View, Point3d, NXObject, View, Point3d) - Method in interface nxopen.SelectNXObjectList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectObject
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectObjectList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Part, View, Point3d, Part, View, Point3d) - Method in interface nxopen.SelectPart
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Part, View, Point3d, Part, View, Point3d) - Method in interface nxopen.SelectPartList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Point, View, Point3d, Point, View, Point3d) - Method in interface nxopen.SelectPoint
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Point, View, Point3d, Point, View, Point3d) - Method in interface nxopen.SelectPointList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Sketch, View, Point3d, Sketch, View, Point3d) - Method in interface nxopen.SelectSketch
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, SmartObject, View, Point3d, SmartObject, View, Point3d) - Method in interface nxopen.SelectSmartObject
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Spline, View, Point3d, Spline, View, Point3d) - Method in interface nxopen.SelectSpline
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, Spline, View, Point3d, Spline, View, Point3d) - Method in interface nxopen.SelectSplineList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectTaggedObject
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, TaggedObject, View, Point3d, TaggedObject, View, Point3d) - Method in interface nxopen.SelectTaggedObjectList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, View, View, Point3d, View, View, Point3d) - Method in interface nxopen.SelectView
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, View, View, Point3d, View, View, Point3d) - Method in interface nxopen.SelectViewList
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DatumPin, View, Point3d, DatumPin, View, Point3d) - Method in interface nxopen.weld.SelectDatumPin
-
The object being selected with the objects view and objects point and snap information.
- setValueWithSnap(InferSnapType.SnapType, DatumSurface, View, Point3d, DatumSurface, View, Point3d) - Method in interface nxopen.weld.SelectDatumSurface
-
The object being selected with the objects view and objects point and snap information.
- setValueX(double, double) - Method in interface nxopen.diagramming.LocationBuilder
-
Set the x value of the location.
- setValueY(double, double) - Method in interface nxopen.diagramming.LocationBuilder
-
Set the y value of the location.
- setValveType(HydraulicValveBuilder.OutputValveType) - Method in interface nxopen.mechatronics.HydraulicValveBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setValveType(PneumaticValveBuilder.OutputValveType) - Method in interface nxopen.mechatronics.PneumaticValveBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setVariable(DAODesignVariableBuilder.Variable, Expression) - Method in interface nxopen.cae.optimization.DAODesignVariableBuilder
-
Sets the design variable
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setVariable(ControlInputPortBuilder.MeasuredVariable) - Method in interface nxopen.motion.ControlInputPortBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setVariable(ControlOutputBuilder.VariableType) - Method in interface nxopen.motion.ControlOutputBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setVariable(String, String) - Method in interface nxopen.uf.UF
-
- setVariableAngleOption() - Method in interface nxopen.features.DraftBuilder
-
Sets the Variable Angle option
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVariableBevelAngles(double[]) - Method in interface nxopen.weld.WeldJointBuilder
-
This method is for use with the variable bevel callback.
- setVariableIncrementListData(int, double) - Method in interface nxopen.cam.CenterlineDrillVariableIncrementBuilder
-
Create a new variable increment at last of list, name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.
- setVariableType(TBSDesignResponseBuilder.Response) - Method in interface nxopen.cae.optimization.TBSDesignResponseBuilder
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setVariance(PitchSetting.VarianceTypes) - Method in interface nxopen.cam.PitchSetting
-
License requirements: cam_base ("CAM BASE")
.
- setVariantConfigurationsForDisplay(Tag, int, UFUgmgr.VariantConfiguration[], boolean[]) - Method in interface nxopen.uf.UFUgmgr
-
- setVariantConfigurationsForLoad(int, UFUgmgr.VariantConfiguration[], boolean[]) - Method in interface nxopen.uf.UFUgmgr
-
- setVarName(String) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVarOverlapMax(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setVarOverlapMin(int) - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
License requirements: nx_ship_concept ("Ship Concept")
.
- setVarScope(InspectionCmmCommandBuilder.VarScopes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVarType(InspectionCmmCommandBuilder.VarTypes) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVclose(MeshParameterData.Type) - Method in interface nxopen.MeshParameterData
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setVCount(int) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVdcCoordinates(CGMBuilder.Vdc) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setVDegree(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setVdegree(int) - Method in interface nxopen.MeshParameterData
-
Sets
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- setVDimension(int, int) - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Sets dimension in V direction of a group of poles
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setVecDirection(Direction) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
- setVector(String, Vector3d) - Method in interface nxopen.blockstyler.PropertyList
-
Sets the vector value for the given property name.
- setVector(Vector3d) - Method in interface nxopen.blockstyler.SpecifyVector
-
License requirements: None.
- setVector(Direction) - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setVector(Direction) - Method in interface nxopen.cae.ElementExtrudeBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVector(Direction) - Method in interface nxopen.cae.ElementProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVector(Direction) - Method in interface nxopen.cae.ElementTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVector(Direction) - Method in interface nxopen.cae.NodeProjectBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVector(Direction) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVector(Point3d) - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
Set vector for extracting data for x axis
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setVector(Direction) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVector(NXObject) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setVector(Direction) - Method in interface nxopen.cam.CutAngle
-
License requirements: cam_base ("CAM BASE")
.
- setVector(Direction) - Method in interface nxopen.cam.GeometryGroup
-
License requirements: cam_base ("CAM BASE")
.
- setVector(Direction) - Method in interface nxopen.cam.LaserLinearMove
-
License requirements: cam_base ("CAM BASE")
.
- setVector(SmartObject) - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setVector(SmartObject) - Method in interface nxopen.cam.NcmScEngRetBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setVector(Direction) - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
License requirements: None.
- setVector(NXObject) - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
License requirements: None.
- setVector(Direction) - Method in interface nxopen.cam.ProjVecCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setVector(Direction) - Method in interface nxopen.cam.RotaryPointMoveBuilder
-
License requirements: None.
- setVector(Direction) - Method in interface nxopen.cam.ToolAxisBase
-
License requirements: cam_base ("CAM BASE")
.
- setVector(Direction) - Method in interface nxopen.cam.ToolChangePositionBuilder
-
License requirements: None.
- setVector(NXObject) - Method in interface nxopen.cam.TrimPoint
-
License requirements: cam_base ("CAM BASE")
.
- setVector(NXObject) - Method in interface nxopen.cam.TurnProbeInspectPointMoveBuilder
-
License requirements: None.
- setVector(NXObject) - Method in interface nxopen.cam.UdeParameter
-
License requirements: cam_base ("CAM BASE")
.
- setVector(Direction) - Method in interface nxopen.cam.VectorDistanceMoveBuilder
-
License requirements: None.
- setVector(Direction) - Method in interface nxopen.die.DieDirectionBuilder
-
License requirements: None.
- setVector(Direction) - Method in interface nxopen.die.DieLocationBuilder
-
License requirements: None.
- setVector(Vector3d) - Method in interface nxopen.Direction
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setVector(Direction) - Method in interface nxopen.features.CircularBlendCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVector(Direction) - Method in interface nxopen.features.DatumAxisBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setVector(Direction) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setVector(Direction) - Method in interface nxopen.features.LawExtensionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setVector(Direction) - Method in interface nxopen.features.LawExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- setVector(Direction) - Method in interface nxopen.features.ScaleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVector(Direction) - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setVector(Direction) - Method in interface nxopen.features.TrimCurve2Builder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVector(Direction) - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
-
- setVector(Direction) - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder
-
- setVector(Direction) - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder
-
- setVector(Direction) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setVector(Direction) - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
License requirements: None.
- setVector(Direction) - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
License requirements: None.
- setVector(Direction) - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setVector(Direction) - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
License requirements: None.
- setVector(Direction) - Method in interface nxopen.geometricutilities.SpineDefinitionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVector(Direction) - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setVector(Direction) - Method in interface nxopen.mechatronics.SlidingJointBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setVector(Direction) - Method in interface nxopen.motion.LinkAttachmentData
-
License requirements: None.
- setVector(Vector3d) - Method in interface nxopen.Offset
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setVector(String, Vector3d) - Method in interface nxopen.PropertyContainer
-
Sets the vector value for the given property name.
- setVector(Direction) - Method in interface nxopen.routing.electrical.AssignProxyBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setVector(UFVariant, String, Tag) - Method in interface nxopen.uf.UFUde
-
- setVector(Direction) - Method in interface nxopen.weld.JointmarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setVector1(Direction) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVector2(Direction) - Method in interface nxopen.MeasureAngleBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVector3Value(Vector3d) - Method in interface nxopen.cam.CAMAttribute
-
Set the feature attribute vector3 value for a vector3 type attribute
License requirements: cam_base ("CAM BASE"), cam_base ("CAM BASE")
.
- setVectorChoice(BeamEADBuilder.VectorChoiceType) - Method in interface nxopen.cae.BeamEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVectorColors(NXColor[]) - Method in interface nxopen.cae.xyplot.VectorStyle2DSetting
-
Set the vector display colors
License requirements: None.
- setVectorComponentDirection(Direction) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setVectorConstraint(Direction) - Method in interface nxopen.features.FitSurfaceBuilder
-
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- setVectorDefineDirection(Direction) - Method in interface nxopen.tooling.SectionLineCreationBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setVectorDirection(Direction) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVectorDistance(double) - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
License requirements: cam_base ("CAM BASE")
.
- setVectorFieldWrapperPropertyValue(String, VectorFieldWrapper) - Method in interface nxopen.cae.PropertyTable
-
- setVectorForAlong(Direction) - Method in interface nxopen.geometricutilities.PatternOrientation
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setVectorForceTorque(Tag, UFMotion.VectorForceTorque) - Method in interface nxopen.uf.UFMotion
-
- setVectorForRamp(Direction) - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
License requirements: None.
- setVectorOption(HingeLineBuilder.Hingeline) - Method in interface nxopen.drawings.HingeLineBuilder
-
License requirements: None.
- setVectorOrigin(Point) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setVectorPlaces(int) - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVectorPropertyValue(String, Direction) - Method in interface nxopen.cae.PropertyTable
-
Sets the direction
Direction
value of the property
License requirements: None.
- setVectorScale(double) - Method in interface nxopen.motion.LoadTransferBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setVectorSource(Direction) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVectorTarget(Direction) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVectorType(BeamForceBuilder.VectorTypes) - Method in interface nxopen.motion.BeamForceBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setVectorValue(String, Vector3d) - Method in interface nxopen.cam.Cycle
-
Set the vector of the parameter
License requirements: cam_base ("CAM BASE")
.
- setVectorViewVec(Direction) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVectorXc(double) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setVectorYc(double) - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setVehicle(HumanPosturePredictionBuilder.VehicleType) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setVehicleCategory(String) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVehicleCoordinateSystem(int, Point3d, Matrix3x3) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Set the vehicle coordinate system.
- setVehicleDescription(String) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVehiclePackagingDataName(String) - Method in interface nxopen.HumanPosturePredictionBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setVehicleWidth(double) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- setVelocityVector(Direction) - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- setVEnabled(boolean) - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setVEnd(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVEndDeg(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVEndDist(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVEndMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVEndSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVentilationHoles(boolean) - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setVentilationLiftDistance(double) - Method in interface nxopen.presslinesimulation.CushionControlBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setVentilationStayDuration(double) - Method in interface nxopen.presslinesimulation.CushionControlBuilder
-
License requirements: nx_pls_die_checker (" NX Press Die Checker")
.
- setVersion(int) - Method in interface nxopen.cae.AfuHeaderId
-
Sets the version of AFU Header Id
License requirements: None.
- setVersionObjects(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the drafting version objects setting when updating drafting objects and member views
License requirements: None.
- setVertex(Point3d) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Sets the vertex on the flange edge, needed to dimension the flange width.
- setVertex0(Point3d) - Method in interface nxopen.ConvergentFacet
-
License requirements: gateway ("UG GATEWAY")
.
- setVertex1(Point3d) - Method in interface nxopen.ConvergentFacet
-
License requirements: gateway ("UG GATEWAY")
.
- setVertex1(Point) - Method in interface nxopen.facet.SewFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.
- setVertex1Range1(Point) - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
License requirements: None.
- setVertex1Range2(Point) - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
License requirements: None.
- setVertex2(Point3d) - Method in interface nxopen.ConvergentFacet
-
License requirements: gateway ("UG GATEWAY")
.
- setVertex2(Point) - Method in interface nxopen.facet.SewFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
.
- setVertex2Range1(Point) - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
License requirements: None.
- setVertex2Range2(Point) - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
License requirements: None.
- setVertexColor(int) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setVertexCoords(int, Point2d) - Method in interface nxopen.geometricutilities.ShapeFrameBuilder
-
Sets the coordinates of the i-th vertex of the frame with respect to the plane
License requirements: None.
- setVertexNode(TaggedObject, boolean) - Method in interface nxopen.cae.ManualMorphBuilder
-
Sets the flag for node-to-vertex map for node-to-edge mapping type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVertexOfFacet(Tag, int, int, double[]) - Method in interface nxopen.uf.UFFacet
-
- setVertexOnCurve2dComponentEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setVertexOnCurveEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setVertexOnCurveSketchGroupEnabled(boolean) - Method in interface nxopen.features.CurveFinderBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- setVertexPointX(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVertexPointY(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVertexPointZ(double) - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVertexSelectors(Edge[], RegionTracker.ExtremityType[]) - Method in interface nxopen.geometricutilities.RegionTracker
-
The input target or tool vertices (edge extremities) used to identify the region
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVertexSize(SubdivisionModelingPreferences.VertexSizeTypes) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setVertexStyle(SubdivisionModelingPreferences.VertexStyleTypes) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setVertical(boolean) - Method in interface nxopen.annotations.BaseNote
-
Sets a flag indicating whether the note is vertical.
- setVertical(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setVertical(boolean) - Method in interface nxopen.SketchAutoConstrainBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setVerticalAlignment(LeaderLineBuilder.VerticalAlignmentOption) - Method in interface nxopen.diagramming.LeaderLineBuilder
-
License requirements: None.
- setVerticalAlignment(boolean) - Method in interface nxopen.InferredConstraintsBuilder
-
License requirements: None.
- setVerticalAttachment(LeaderVerticalAttachment) - Method in interface nxopen.annotations.LeaderData
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setVerticalCarcassEffects(boolean) - Method in interface nxopen.motion.TirePropertyHighOrderParameters
-
License requirements: mechanisms ("MECHANISMS")
.
- setVerticalCenteringMark(SheetBordersAndZonesBuilder.VerticalCenteringMarkType) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setVerticalCenteringMark(BordersAndZonesBuilder.VerticalCenteringMarkType) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setVerticalFlip(boolean) - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVerticalGroupAttachment(PartsListBuilder.PartsListVerticalGroupLeaderAttachment) - Method in interface nxopen.annotations.PartsListBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVerticalGrowthDirection(DrawingRegionBuilder.RegionVerticalGrowthDirection) - Method in interface nxopen.drawings.DrawingRegionBuilder
-
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- setVerticalInferredMarginLocation(Point3d) - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVerticalLeaderAttachment(CalloutGroupBuilder.VerticalGroupLeaderAttachment) - Method in interface nxopen.annotations.CalloutGroupBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVerticalNote(Tag, boolean) - Method in interface nxopen.uf.UFDrf
-
- setVerticalSize(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setVerticalSize(double) - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
License requirements: None.
- setVerticalSize(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setVerticalSize(double) - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVerticalText(boolean) - Method in interface nxopen.annotations.DraftingNoteBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setVertices(Point3d[]) - Method in interface nxopen.ConvergentFacet
-
Sets the coordinates of all the three vertices of a convergent facet to new values.
- setVideoFile(String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setView(View) - Method in interface nxopen.annotations.BoundaryBuilder
-
The boundary view
License requirements: None.
- setView(ModelingView) - Method in interface nxopen.display.DynamicSectionBuilder
-
License requirements: None.
- setView() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Sets the current view normal to the main plane, which is the base plane to construct the primary
sketch in the template part.
- setView(int, int, ModelingView) - Method in interface nxopen.LayoutDefinition
-
- setViewAnchor(Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- setViewAngle(Tag, double) - Method in interface nxopen.uf.UFDraw
-
- setViewBoundary(ViewCreationWizardBuilder.ViewBoundaryOption) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewBoundaryColor(NXColor) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewBoundaryColor(NXColor) - Method in interface nxopen.preferences.DetailViewPreferences
-
License requirements: drafting ("DRAFTING")
.
- setViewBoundaryFont(Font) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewBoundaryFont(Font) - Method in interface nxopen.preferences.DetailViewPreferences
-
License requirements: drafting ("DRAFTING")
.
- setViewBoundaryWidth(Width) - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewBoundaryWidth(Width) - Method in interface nxopen.preferences.DetailViewPreferences
-
License requirements: drafting ("DRAFTING")
.
- setViewCompare(boolean) - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- setViewCreation(GeneralArrangementViewBuilder.ViewCreationType) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setViewDirection(Vector3d) - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setViewDirection(GeneralArrangementViewBuilder.ViewDirectionType) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setViewDirection(Vector3d) - Method in interface nxopen.features.subdivision.SelectCageObjectData
-
Sets the view direction.
- setViewDisplay(Tag, UFDraw.ViewPrfs) - Method in interface nxopen.uf.UFDraw
-
- setViewEditMode(boolean) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setViewedPartitionScheme(PartitionScheme) - Method in interface nxopen.assemblies.SubsetBuilder
-
License requirements: nx_4gd_integration ("4th Generation Design")
.
- setViewExplosion(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- setViewFitToStage(boolean) - Method in interface nxopen.display.EnvironmentBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setViewGeometryToSketch(boolean) - Method in interface nxopen.ASCImporter
-
License requirements: nx_layout ("NX Layout")
.
- setViewImageAfterSnapshotting(boolean) - Method in interface nxopen.report.ReportPreference
-
License requirements: None.
- setViewIndex(int) - Method in interface nxopen.cae.GraphFromResultProbeBuilder
-
The view index will be set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setViewIndexForPostView(int) - Method in interface nxopen.cae.ResultsReductionBuilder
-
Set view index where postview will be created
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setViewLabel(boolean) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the display of view label.
- setViewLabel(boolean) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewLabelOption(ViewLabelTypes) - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewLabelOption(ViewLabelTypes) - Method in interface nxopen.drawings.ViewLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewLabelOption(ViewLabelTypes) - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewLabelParms(Tag, UFDraw.ViewLabelParms) - Method in interface nxopen.uf.UFDraw
-
- setViewLabels(boolean) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewLight(Tag, UFView.Lighting) - Method in interface nxopen.uf.UFView
-
- setViewList(String) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setViewList(String) - Method in interface nxopen.IgesCreator
-
License requirements: None.
- setViewLocation(Point) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setViewMatrix(String, int, Tag, double[]) - Method in interface nxopen.uf.UFView
-
- setViewName(String) - Method in interface nxopen.annotations.LightweightSectionBuilder
-
License requirements: geometric_tol ("GDT")
.
- setViewName(String) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setViewName(String) - Method in interface nxopen.NXTo2dCreator
-
License requirements: None.
- setViewNameFormat(CuttingPlaneSymbolBuilder.ViewNameFormatOption) - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
License requirements: geometric_tol ("GDT")
.
- setViewOption(AssemblyDrawingBuilder.ViewOptionValue) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setViewOrientation(Matrix3x3) - Method in interface nxopen.cae.xyplot.WallDisplayStyles3D
-
License requirements: None.
- setViewOrigin(Point3d) - Method in interface nxopen.drawings.ViewStylePerspectiveBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewParmScale(Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- setViewPort(int) - Method in interface nxopen.motion.LoadTransferControl
-
Sets view port
License requirements: mechanisms ("MECHANISMS")
.
- setViewportDescription(int, String) - Method in interface nxopen.cae.LayoutState
-
Sets the layout information and the datareferences to a given viewport location
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setViewportIndex(int) - Method in interface nxopen.cae.PostScenarioBuilder
-
- setViewPortIndex(int) - Method in interface nxopen.cae.PostScenarioParameters
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setViewPortIndex(int) - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setViewPortIndex(int) - Method in interface nxopen.cae.xyplot.BasePlotParameters
-
License requirements: None.
- setViewportSynchronizationOptions(ViewportSynchronizationOptions) - Method in interface nxopen.cae.PostScenarioManager
-
Sets the viewport synchronization options.
- setViewPosition(double, double) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
Sets the view position on the drawing
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setViewProgress(boolean) - Method in interface nxopen.mfg.am.Nester3D
-
License requirements: am_pb_mtls_nest_3d_2 ("Advanced NX Powder Bed Additive 3D Nesting") OR am_pb_mtls_nest_3d_1 ("Basic NX Powder Bed Additive 3D Nesting")
.
- setViewQuality(GeneralViewQualityOption) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the view quality, that provides an alternative way to display
model geometry in a drawing view.
- setViewQuality(GeneralViewQualityOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewQuality(GeneralViewQualityOption) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the view quality that provides alternative ways to display
geometry in a drawing member view.
- setViewRepresentation(GeneralViewRepresentationOption) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the view representation enum on the GENERAL tab of the View Style Dialog
License requirements: drafting ("DRAFTING")
.
- setViewRepresentation(ViewCreationWizardBuilder.ViewRepresentations) - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewRepresentation(GeneralViewRepresentationOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setViewRepresentation(GeneralViewRepresentationOption) - Method in interface nxopen.preferences.GeneralViewPreferences
-
License requirements: drafting ("DRAFTING")
.
- setViews(View[]) - Method in interface nxopen.annotations.Annotation
-
Sets the views that the PMI display instance object is displayed in.
- setViewScale(Tag, double) - Method in interface nxopen.uf.UFDraw
-
- setViewsPerSheet(SectionDrawingBuilder.ViewsPerSheetOptions) - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setViewStatus(Tag, UFDraw.ViewStatus) - Method in interface nxopen.uf.UFDraw
-
- setViewString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setViewStyle(PartDrafting.ViewStyleType) - Method in interface nxopen.preferences.PartDrafting
-
Sets the drafting view style type for preview when placing the view
License requirements: None.
- setViewThdAppPitch(Tag, double) - Method in interface nxopen.uf.UFDraw
-
- setViewThdMeth(Tag, int) - Method in interface nxopen.uf.UFDraw
-
- setViewTool(boolean) - Method in interface nxopen.cam.WorkInstructionBuilder
-
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- setViewTracking(boolean) - Method in interface nxopen.preferences.PartDrafting
-
Sets the flag indicating whether to track a drafting view during preview
when placing the view.
- setViewType(StandardViewsBuilder.View) - Method in interface nxopen.drawings.StandardViewsBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setViewType(String) - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
.
- setViewType(SectionDrawingBuilder.ViewTypeOptions) - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setViewUnfolded(boolean) - Method in interface nxopen.drawings.SectionViewBuilder
-
- setViewValidationResults(boolean) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setViolationAction(SessionMeasureRequirements.ActionOnViolation) - Method in interface nxopen.preferences.SessionMeasureRequirements
-
License requirements: None.
- setViolationLocation(int, DesignRuleViolationLocation) - Method in interface nxopen.routing.DesignRuleViolation
-
- setViolationOverride(String, String, int) - Method in interface nxopen.routing.DesignRuleViolation
-
Sets the violation override
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setVirtualIntersection(boolean) - Method in interface nxopen.drawings.VirtualIntersectionsViewStyle
-
Sets the status of virtual intersection.
- setVirtualIntersection(boolean) - Method in interface nxopen.preferences.VirtualIntersectionsViewPreferences
-
Sets the status of virtual intersection.
- setVirtualInterSectionColor(NXColor) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVirtualInterSectionFont(CustomViewSettingsBuilder.Font) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVirtualIntersections(boolean) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVirtualInterSectionWidth(CustomViewSettingsBuilder.Width) - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVirtualPorts(String[]) - Method in interface nxopen.routing.MultiPort
-
Sets the virtual ports that are associated with this
MultiPort
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- setVirtualReferenceId(String) - Method in interface nxopen.routing.RunItemsBuilder
-
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setViscous(double) - Method in interface nxopen.cae.responsesimulation.NormalMode
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setViscous(double) - Method in interface nxopen.motion.NormalModeProperty
-
License requirements: mechanisms ("MECHANISMS")
.
- setViscousDampingFactor(double) - Method in interface nxopen.cae.LaminateModeProperty
-
Sets the viscous damping factor
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setViscousDampingState(DamperEADBuilder.State) - Method in interface nxopen.cae.DamperEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setVisibility(String, String, boolean) - Method in interface nxopen.ame.ConfigureResultTableBuilder
-
The visibility status of each column or group
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setVisibility(PostShowhideBuilder.Vis) - Method in interface nxopen.cae.PostShowhideBuilder
-
Enum whther the entities to be shown or hidden
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setVisibility(boolean) - Method in interface nxopen.cae.xyplot.IVisibleDisplayStyle
-
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
-
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.ExpressionGroup
-
Sets an expression group's visibility
License requirements: None.
- setVisibility(SmartObject.VisibilityOption) - Method in interface nxopen.SmartObject
-
Sets the visibility.
- setVisibility(boolean) - Method in interface nxopen.uistyler.ButtonLayout
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.CollapsibleGroup
-
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.ColorTool
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.GroupBox
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.IntegerItem
-
Sets the visibility of the dialog item.
- setVisibility(boolean) - Method in interface nxopen.uistyler.IntegerScale
-
Sets the visibility of the dialog item.
- setVisibility(boolean) - Method in interface nxopen.uistyler.LabelItem
-
Sets the visibility of the dialog item
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.MultiSelectList
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.MultiTextBox
-
Sets the visibility of the dialog item
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.OptionMenu
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.OptionToggle
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.PropertyPage
-
Sets the visibility of the dialog item.
- setVisibility(boolean) - Method in interface nxopen.uistyler.PushButton
-
Sets the visibility of dialog.
- setVisibility(boolean) - Method in interface nxopen.uistyler.RadioBox
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.RealItem
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.RealScale
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.RowColumn
-
Sets the visibility
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.ScrolledWindow
-
Sets
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.SelectionBox
-
Sets the visibility of the selection box
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.Separator
-
Sets the visibility of the separator
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.SingleSelectList
-
Sets the visibility of the single select list
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.StringItem
-
Sets the visibility of the dialog item
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.TabControl
-
Sets the visibility of the dialog item
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.Toggle
-
Sets the visibility of the toggle
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.ToolPalette
-
Sets the visibility of the dialog item
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.uistyler.WideString
-
Sets the visibility of the wide string
License requirements: None.
- setVisibility(boolean) - Method in interface nxopen.WCS
-
License requirements: None.
- setVisibilityCoordinates(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
License requirements: None.
- setVisibilityMaxRadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
License requirements: None.
- setVisibilityMinMaxRadiusTangent(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
License requirements: None.
- setVisibilityMinRadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
License requirements: None.
- setVisibilityOption(Tag, UFSo.VisibilityOption) - Method in interface nxopen.uf.UFSo
-
- setVisibilityRadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
License requirements: None.
- setVisibilityURadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
License requirements: None.
- setVisibilityUV(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
License requirements: None.
- setVisibilityUVTangent(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
License requirements: None.
- setVisibilityVRadius(boolean) - Method in interface nxopen.geometricanalysis.LocalRadiusAnalysisBuilder
-
License requirements: None.
- setVisible(boolean) - Method in interface nxopen.markup.MarkupObject
-
License requirements: None.
- setVisibleColor(int) - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Sets the visible color.
- setVisibleColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setVisibleColor(NXColor) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVisibleColor(NXColor) - Method in interface nxopen.drawings.ViewStyleVisibleLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVisibleColor(int) - Method in interface nxopen.drawings.VisibleLinesViewStyle
-
Sets the visible color.
- setVisibleColor(NXColor) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisibleColor(int) - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Sets the visible color.
- setVisibleColor(int) - Method in interface nxopen.preferences.VisibleLinesViewPreferences
-
Sets the visible color.
- setVisibleConstraintsRule(ConstraintDisplayBuilder.VisibleConstraintsRuleOptions) - Method in interface nxopen.assemblies.ConstraintDisplayBuilder
-
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setVisibleFont(Font) - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Sets the visible font
License requirements: drafting ("DRAFTING")
.
- setVisibleFont(Font) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setVisibleFont(Font) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVisibleFont(Font) - Method in interface nxopen.drawings.ViewStyleVisibleLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVisibleFont(Font) - Method in interface nxopen.drawings.VisibleLinesViewStyle
-
Sets the visible font.
- setVisibleFont(Font) - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Sets the visible font
License requirements: drafting ("DRAFTING")
.
- setVisibleFont(Font) - Method in interface nxopen.preferences.VisibleLinesViewPreferences
-
Sets the visible font.
- setVisibleManipulatorHandles(int) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setVisibleWidth(Width) - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Sets the visible width
License requirements: drafting ("DRAFTING")
.
- setVisibleWidth(Width) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setVisibleWidth(Width) - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVisibleWidth(Width) - Method in interface nxopen.drawings.ViewStyleVisibleLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVisibleWidth(Width) - Method in interface nxopen.drawings.VisibleLinesViewStyle
-
Sets the visible width.
- setVisibleWidth(Width) - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Sets the visible width
License requirements: drafting ("DRAFTING")
.
- setVisibleWidth(Width) - Method in interface nxopen.preferences.VisibleLinesViewPreferences
-
Sets the visible width.
- setVisibleWireframeColor(NXColor) - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
License requirements: drafting ("DRAFTING")
.
- setVisionType(VisionPlaneBuilder.CustomVisionAngle) - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisionType(WindshieldDatumBuilder.CustomVisionAngle) - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisualization(PostScenarioVisualizationDefinition) - Method in interface nxopen.cae.PostScenarioBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setVisualization(BumperPendulumBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisualization(DynamicCurbBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisualization(GroundClearanceBuilder.VisualizationTypes) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisualization(InnerAngleBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisualization(OilPanBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisualization(SlopeBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisualization(StaticCurbBuilder.VisualizationType) - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVisualization(IsvControlPanelBuilder.VisualizationType) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Sets the visualization
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setVisualization(Tag, UFView.Visualization) - Method in interface nxopen.uf.UFView
-
- setVisualizationData(boolean) - Method in interface nxopen.SaveOptions
-
Sets the option indicating whether to generate Teamcenter Visualization
.jt files when a part is saved
License requirements: None.
- setVisualize2dTool1Color(NXColor) - Method in interface nxopen.cam.Preferences
-
- setVisualize2dTool2Color(NXColor) - Method in interface nxopen.cam.Preferences
-
- setVisualize2dTool3Color(NXColor) - Method in interface nxopen.cam.Preferences
-
- setVisualize2dTool4Color(NXColor) - Method in interface nxopen.cam.Preferences
-
- setVisualize2dTool5Color(NXColor) - Method in interface nxopen.cam.Preferences
-
- setVisualizeAnimationAccuracy(Preferences.AnimationAccuracyTypes) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeAutoBlockColor(NXColor) - Method in interface nxopen.cam.Preferences
-
- setVisualizeBackgroundColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeChordalTolerance(double) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeCollisionsColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeDepth(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setVisualizeDraft(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setVisualizeDraftOptions(DieEngDefineProductOrientationBuilder.ViewDraftOptions) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setVisualizeDynamicToolAxis(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeExcessMaterialColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeGougesColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor1(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor10(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor2(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor3(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor4(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor5(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor6(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor7(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor8(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColor9(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwDmrColoringMode(Preferences.IpwDmrColoringTypes) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeIpwTranslucency(int) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeSafeToolColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeTemporaryContainmentCurveColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeToolAxisTiltTolerance(double) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeToolDisplayColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeToolEditAndDisplay(boolean) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeToolHolderColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeToolInsertOrFluteColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeToolShankColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeToolTranslucency(int) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setVisualizeZone(boolean) - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setVolume(String) - Method in interface nxopen.pdm.PersistentSettings
-
License requirements: None.
- setVolume(String) - Method in interface nxopen.pdm.SessionSettings
-
License requirements: None.
- setVolumeDefinitionOption(TBSTopologyControllerOptimizationParameters.VolumeDefinitionMethod) - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setVolumes(double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Sets all of the volumes stored with this UDO
License requirements: None.
- setVolumes(int, int, double[]) - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Replaces the volumes stored with this UDO in the specified range with a new array of volumes
License requirements: None.
- setVolumeThreshold(double) - Method in interface nxopen.cam.MinCutVolume
-
License requirements: cam_base ("CAM BASE")
.
- setVonMisesStress(boolean) - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- setVparameter1(double) - Method in interface nxopen.weld.FilletBuilder
-
- setVparameter1(double) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setVparameter2(double) - Method in interface nxopen.weld.FilletBuilder
-
- setVparameter2(double) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setVPatches(int) - Method in interface nxopen.features.RapidSurfaceBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setVPatches(int) - Method in interface nxopen.geometricutilities.DegreesAndSegmentsOrPatchesBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setVPercentage(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setVScale(double) - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
License requirements: studio_render ("UG STUDIO RENDER")
.
- setVStart(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVStartDeg(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVStartDist(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVStartEndMode(InspectionSurfaceFeatureBuilder.StartEndModeType) - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVStartMode(InspectionMethodBuilder.UVModeTypes) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setVStartSweep(double) - Method in interface nxopen.cam.InspectionMethodBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setWadBoundaryValue(PedestrianProtectionBuilder.Wad) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWadEndValue(PedestrianProtectionBuilder.Wad) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWadOutputColor(NXColor) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWadOutputFont(PedestrianProtectionBuilder.Font) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWadOutputLayer(int) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWadOutputWidth(PedestrianProtectionBuilder.Width) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWadStartValue(PedestrianProtectionBuilder.Wad) - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWaferHeight(double) - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWall(boolean) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setWallACreate(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallARelief(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallBCreate(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallBRelief(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallCCreate(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallCleanupType(MillOperationBuilder.WallCleanupTypes) - Method in interface nxopen.cam.MillOperationBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setWallColor(NXColor) - Method in interface nxopen.cam.Preferences
-
License requirements: cam_base ("CAM BASE")
.
- setWallCRelief(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallDCreate(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallDRelief(boolean) - Method in interface nxopen.die.HeelpostBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallFaces(ScCollector) - Method in interface nxopen.cam.ManualFeatureBuilder
-
License requirements: None.
- setWallFaces(NXObject[]) - Method in interface nxopen.cam.Splitter
-
Set the wall faces
License requirements: cam_base ("CAM BASE")
.
- setWallFaces(ScCollector) - Method in interface nxopen.features.AnalyzePocketBuilder
-
License requirements: None.
- setWallFaces(ScCollector) - Method in interface nxopen.features.BlendPocketBuilder
-
License requirements: None.
- setWallInList(Stage.WallType, Wall) - Method in interface nxopen.display.Stage
-
Sets a wall builder in the array at the given index
License requirements: None.
- setWallMaterialTextureType(Wall.MaterialTextureType) - Method in interface nxopen.display.Wall
-
License requirements: None.
- setWallMaterialType(Wall.MaterialType) - Method in interface nxopen.display.Wall
-
- setWallSelection(Preferences.WallSelectionTypes) - Method in interface nxopen.cam.Preferences
-
- setWallStepMethod(DmCmMultiplePassesCiBuilder.WallStepMethodType) - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setWallStock(double) - Method in interface nxopen.cam.CutVolume
-
License requirements: cam_base ("CAM BASE")
.
- setWallThickness(double) - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallThickness(double) - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallThickness(double) - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWallThickness(double) - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWarningElementsColor(NXColor) - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setWarningShowIsocline(boolean) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setWarningValue(double) - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setWarnOnDelete(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the warn on delete option
License requirements: None.
- setWarnOnDragDrop(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the warn on drag and drop
License requirements: None.
- setWarnUserFlag(boolean) - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Sets the warn user flag.
- setWarpToggle(boolean) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setWarpValue(double) - Method in interface nxopen.cae.ElementSplitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setWashout1(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setWashout2(boolean) - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- setWaterline(boolean) - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWaterlineLabelColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWaterlineLabelFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWaterlineLabelItalicized(boolean) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWaterlineLabelWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWaterlineTicColor(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWaterlineTicDisplay(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWaterlineTicFont(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWaterlineTicLength(double) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWaterlineTicWidth(int) - Method in interface nxopen.annotations.FrameBarPreferences
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setWatermark(String) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setWaterStopOffsetOption(AlongGuideCutBuilder.WaterStopOffsetMethod) - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design")
.
- setWaveDatumBuilder(WaveDatumBuilder) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setWavePointBuilder(WavePointBuilder) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setWaveRoutingBuilder(WaveRoutingBuilder) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setWaveSetting(ObjectBuilder.Wave) - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
License requirements: None.
- setWaveSketchBuilder(WaveSketchBuilder) - Method in interface nxopen.features.WaveLinkBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setWavinessText(String) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setWavinessTextType(SearchModelViewBuilder.TextComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
License requirements: None.
- setWcs(Tag) - Method in interface nxopen.uf.UFCsys
-
- setWcsAtCsys() - Method in interface nxopen.features.DatumCsys
-
Sets WCS at CSYS.
- setWCSCoordinates(boolean) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setWCSDirection(MovePoleBuilder.WCSDirectionType) - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
License requirements: None.
- setWcsDisplay(int) - Method in interface nxopen.uf.UFCsys
-
- setWCSForSpecialPiercingInsert(boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Set work coordinate system for special piercing insert
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWcsOffset(double) - Method in interface nxopen.cam.TurnOrientWcs
-
License requirements: None.
- setWCSOption(PolylineBuilder.WCSOptionType) - Method in interface nxopen.features.PolylineBuilder
-
License requirements: features_modeling ("FEATURES MODELING")
.
- setWCSOption(StudioSplineBuilderEx.WCSOptionType) - Method in interface nxopen.features.StudioSplineBuilderEx
-
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setWCSOption(TransformCageData.WCSOptionType) - Method in interface nxopen.features.subdivision.TransformCageData
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setWCSOption(CurveShapingBuilder.WCSOptionType) - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setWcsOrientOption(boolean) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setWcstype(MoldCsysBuilder.Wcsposition) - Method in interface nxopen.tooling.MoldCsysBuilder
-
License requirements: None.
- setWcsVisibility(boolean) - Method in interface nxopen.View
-
License requirements: None.
- setWcsWorkPlaneEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not objects on the WCS work
plane are emphasized.
- setWearIndicatorPerSegment(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setWearPlateLength(String) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWearPlateLength(String) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWearPlateWidth(String) - Method in interface nxopen.die.WearPlateLocChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWearPlateWidth(String) - Method in interface nxopen.die.WearPlateLocParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWebDistance(double) - Method in interface nxopen.tooling.BlankNestingBuilder
-
License requirements: None.
- setWebTaperType1(BendTaperBuilder.WebTaperType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setWebTaperType2(BendTaperBuilder.WebTaperType) - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- setWeight(double) - Method in interface nxopen.cae.ModelUpdateDesignVariable
-
Sets weight
License requirements: nx_correl_update ("FE Model Update")
.
- setWeight(double) - Method in interface nxopen.cae.optimization.TBSSingleObjective
-
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- setWeight(TransientText.TextSize) - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
License requirements: None.
- setWeightData(HumanData.WeightType, double, HumanData.WeightUnitType) - Method in interface nxopen.features.HumanBuilder
-
Sets human weight data
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- setWeightPercent(int) - Method in interface nxopen.features.subdivision.SubdivisionSetWeightBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setWeightRating(String) - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- setWelcomeMode(boolean) - Method in interface nxopen.preferences.LoadDraftingStandardBuilder
-
License requirements: None.
- setWeldAlongContour(LineWeldBuilder.WeldSymbolWeldAlongContourType) - Method in interface nxopen.annotations.LineWeldBuilder
-
Sets the weld along contour option
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setWeldArcGridLineEndCapDisp(double) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldArcGridLineTopDisp(double) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldAssoColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldConstLayer(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldData(LineWeldData) - Method in interface nxopen.annotations.LineWeld
-
Sets the weld data.
- setWeldDirection(MeshControlBuilder.WeldSide) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setWeldDirectionScarEdge(NXObject) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setWeldFaceDefinition(int) - Method in interface nxopen.cae.MeshControlBuilder
-
Set current weld face definition
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setWeldFixedColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldGroupIdLowerRange(String) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldGroupIdUpperRange(String) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldIdLowerRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldIdUpperRange(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldLineGap(double) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the weld symbol line gap
License requirements: None.
- setWeldLineGap(double) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Sets the gap between the weld line and weld type symbol
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setWeldLineOption(boolean) - Method in interface nxopen.tooling.FlowDisplayBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setWeldLocation(Point) - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setWeldNamePrefix(String) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldNumberOfLayers(int) - Method in interface nxopen.cae.MeshControlBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setWeldObjectLayer(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldPartNumber(String) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldRetainedColor(NXColor) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldRowSize(int) - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setWeldSelection(TaggedObject) - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Set the weld selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setWeldSelection(TaggedObject) - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Set the weld selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setWeldSize(String) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setWeldSizeCode(LineWeldDataBuilder.WeldSizeCodeType) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setWeldSpaceFactor(double) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the weld symbol space factor
License requirements: None.
- setWeldSpaceFactor(double) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Sets the weld space factor
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setWeldStandard(WeldStandard) - Method in interface nxopen.annotations.AnnotationManager
-
Sets the weld standard for the part file.
- setWeldStandard(WeldStandard) - Method in interface nxopen.annotations.LineWeldData
-
License requirements: None.
- setWeldSymbol(LineWeldDataBuilder.WeldSymbolType) - Method in interface nxopen.annotations.LineWeldDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setWeldSymbolCfw(LineCfw) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the weld symbol color, font, and width
License requirements: None.
- setWeldSymbolColor(NXColor) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setWeldSymbolDecimalPlaces(int) - Method in interface nxopen.weld.WeldPreferenceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldSymbolFont(DisplayableObject.ObjectFont) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setWeldSymbolSizeFactor(double) - Method in interface nxopen.annotations.SymbolPreferences
-
License requirements: None.
- setWeldSymbolSizeFactor(double) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Sets the character size factor that controls the weld symbol size.
- setWeldSymbolStandard(WeldStandard) - Method in interface nxopen.annotations.SymbolPreferences
-
Sets the weld symbol standard
License requirements: None.
- setWeldSymbolStandard(WeldStandard) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Sets the weld symbol standard
License requirements: None.
- setWeldSymbolStandard(String) - Method in interface nxopen.uf.UFDrf
-
- setWeldSymbolWidth(LineWidth) - Method in interface nxopen.annotations.SymbolStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setWeldSymmetric(boolean) - Method in interface nxopen.weld.WeldGrooveBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldType(CAEWeldConnectionBuilder.WeldTypeEnum) - Method in interface nxopen.cae.CAEWeldConnectionBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setWeldType(WeldFeatureSetType) - Method in interface nxopen.weld.AutoPointBuilder
-
- setWeldType(PointMarkBuilder.WeldTypes) - Method in interface nxopen.weld.AutoPointBuilder
-
Sets the weld type references in the customer defaults to create.
- setWeldType(int) - Method in interface nxopen.weld.JointItemBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setWeldType(PointMarkBuilder.WeldTypes) - Method in interface nxopen.weld.PointMarkBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWeldType(WeldJointBuilder.WeldTypes) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setWeldType(WeldFeatureSetType) - Method in interface nxopen.weld.WeldPointBuilder
-
Sets the weld type.
- setWheelCsys(CoordinateSystem) - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWheelGlobal(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setWheelPositionDefinition(BaseDataWheelBuilder.PositionDefinitionOptions) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWheelProtrusionPoint(Point) - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWheelRoadRef(boolean) - Method in interface nxopen.motion.TirePropertyCdBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setWheelSize(DynamicCurbBuilder.WheelType) - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWheelSize(GroundClearanceBuilder.WheelType) - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWheelSize(InnerAngleBuilder.WheelSizeType) - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWheelSize(SlopeBuilder.WheelSizeType) - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWheelSize(WheelFixingBuilder.WheelSizeType) - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWhiteBackground(boolean) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWholeProjectToggle(boolean) - Method in interface nxopen.ame.ReportsSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setWideValue(String) - Method in interface nxopen.blockstyler.StringBlock
-
- setWidth(AutomaticCenterlineBuilder.CenterlineThickness) - Method in interface nxopen.annotations.AutomaticCenterlineBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(CenterlineSettingsBuilder.CenterlineThickness) - Method in interface nxopen.annotations.CenterlineSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(EditSymbolDisplayBuilder.WidthTypes) - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(double) - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(LineWidth) - Method in interface nxopen.annotations.HatchBuilder
-
- setWidth(LineWidth) - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(IntersectionSymbolBuilder.Thickness) - Method in interface nxopen.annotations.IntersectionSymbolBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(Value) - Method in interface nxopen.annotations.IRectangularTarget
-
Sets the target width.
- setWidth(OffsetCenterPointBuilder.Thickness) - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(Value) - Method in interface nxopen.annotations.RectangularTargetData
-
Sets the width.
- setWidth(TargetPointBuilder.Thickness) - Method in interface nxopen.annotations.TargetPointBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(int) - Method in interface nxopen.blockstyler.DrawingArea
-
License requirements: None.
- setWidth(int) - Method in interface nxopen.blockstyler.MultilineString
-
License requirements: None.
- setWidth(int) - Method in interface nxopen.blockstyler.ScrolledWindow
-
License requirements: None.
- setWidth(int) - Method in interface nxopen.blockstyler.Tree
-
License requirements: None.
- setWidth(int) - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting
-
License requirements: None.
- setWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting
-
License requirements: None.
- setWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.cae.xyplot.ICurveDisplaySettings
-
License requirements: None.
- setWidth(double) - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setWidth(double) - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setWidth(double) - Method in interface nxopen.cam.LaserCutoutDefinition
-
License requirements: cam_base ("CAM BASE")
.
- setWidth(double) - Method in interface nxopen.ColorWidth
-
License requirements: None.
- setWidth(double) - Method in interface nxopen.CustomWidth
-
License requirements: None.
- setWidth(double) - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
License requirements: None.
- setWidth(double) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setWidth(double) - Method in interface nxopen.diagramming.tables.ColumnBuilder
-
The method to set the width of a column.
- setWidth(double) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Sets the width of the handling core.
- setWidth(double) - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Sets the width of handling cores.
- setWidth(double) - Method in interface nxopen.die.KeywayChildBuilder
-
Sets the width of the keyway.
- setWidth(double) - Method in interface nxopen.die.KeywayParentBuilder
-
Sets the width of keyways.
- setWidth(double) - Method in interface nxopen.die.PadChildBuilder
-
Sets the width of the die pad.
- setWidth(double) - Method in interface nxopen.die.PadParentBuilder
-
Sets the width of die pads.
- setWidth(String) - Method in interface nxopen.die.PierceHoleChildBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWidth(String) - Method in interface nxopen.die.PierceHoleParentBuilder
-
License requirements: ug_die_design ("Die Design")
.
- setWidth(double) - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- setWidth(BrokenViewBuilder.LineWidth) - Method in interface nxopen.drawings.BrokenViewBuilder
-
License requirements: None.
- setWidth(SectionLineStyleBuilder.WidthStyle) - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- setWidth(String, ShipbuildingLinesViewStyle.Lines, Width) - Method in interface nxopen.drawings.ShipbuildingLinesViewStyle
-
The width of hidden line or edges.
- setWidth(String, ShipDraftingViewLinesViewStyle.Lines, Width) - Method in interface nxopen.drawings.ShipDraftingViewLinesViewStyle
-
The width of ship line.
- setWidth(Width) - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(Width) - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(Width) - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(Width) - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWidth(String) - Method in interface nxopen.features.BlockFeatureBuilder
-
The expression representing the block width.
- setWidth(String) - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
- setWidth(String) - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
- setWidth(PartObject.WidthType) - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setWidth(double) - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWidth(double) - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWidth(DisplayableObject.ObjectWidth) - Method in interface nxopen.LineWidthBuilder
-
License requirements: None.
- setWidth(PartDrafting.WidthType) - Method in interface nxopen.preferences.PartDrafting
-
Sets the line width of the retained
Annotation
objects
License requirements: None.
- setWidth(PartObject.ObjectType, PartObject.WidthType) - Method in interface nxopen.preferences.PartObject
-
Sets width for specified object type
License requirements: None.
- setWidth(String, ShipbuildingLinesViewPreferences.Lines, Width) - Method in interface nxopen.preferences.ShipbuildingLinesViewPreferences
-
The width of hidden line or edges.
- setWidth(String, ShipDraftingViewLinesViewPreferences.Lines, Width) - Method in interface nxopen.preferences.ShipDraftingViewLinesViewPreferences
-
The width of hidden line or edges.
- setWidth(double) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Sets the width of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setWidth(double) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setWidth(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setWidth(String) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
License requirements: None.
- setWidth(int) - Method in interface nxopen.uistyler.DialogItem
-
Specifies the pixel width for the dialog.
- setWidth(double) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWidth1ScaleFactor(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWidth2ScaleFactor(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWidth3ScaleFactor(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWidth4ScaleFactor(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWidth5ScaleFactor(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWidth6ScaleFactor(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWidth7ScaleFactor(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWidth8ScaleFactor(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWidth9ScaleFactor(double) - Method in interface nxopen.PrintBuilder
-
License requirements: None.
- setWidthAlong(WeldFillBuilder.WidthAlongType) - Method in interface nxopen.weld.WeldFillBuilder
-
License requirements: ugweld ("UG WELD")
.
- setWidthAsString(String) - Method in interface nxopen.blockstyler.StringBlock
-
License requirements: None.
- setWidthDimensionType(AeroFlangeBuilder.WidthDimensionOptions) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setWidthDirection(BridgeTransitionBuilder.WidthDirectionOptions) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setWidthFactorMode(DxfdwgCreator.WidthfactorMethodOptions) - Method in interface nxopen.DxfdwgCreator
-
License requirements: None.
- setWidthHeight(double, double) - Method in interface nxopen.linedesigner.PickRectanglePointsBuilder
-
To set rectangle width and height
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- setWidthMethod(AeroFlangeBuilder.WidthMethods) - Method in interface nxopen.features.AeroFlangeBuilder
-
License requirements: nx_aero_design (" NX Aero Design")
.
- setWidthOption(FlangeBendPropertiesBuilder.WidthOptions) - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
.
- setWidthOption(LineWidthOption) - Method in interface nxopen.LineWidthBuilder
-
License requirements: None.
- setWidthOptions(boolean, double) - Method in interface nxopen.preferences.PartVisualizationLine
-
Modifies the show widths and width scale options.
- setWidthPolicy(DiagrammingSizingpolicy) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setWidths(CGMBuilder.Width) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setWidths(PlotColorsWidthsBuilder.Width) - Method in interface nxopen.PlotColorsWidthsBuilder
-
License requirements: None.
- setWidths(PrintPDFBuilder.Width) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setWidthScale(double) - Method in interface nxopen.display.DecalBuilder
-
License requirements: None.
- setWidthScale(double) - Method in interface nxopen.preferences.PartVisualizationLine
-
Sets the width scale option.
- setWidthSide(GussetBuilder.WidthSides) - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- setWidthSource(int) - Method in interface nxopen.ColorWidth
-
License requirements: None.
- setWidthTolerance(double) - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
-
License requirements: None.
- setWidthType(SearchModelViewBuilder.ValueComparisionOptions) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setWidthType(BridgeTransitionBuilder.WidthOptions) - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- setWidthType(FlangeBuilder.WidthTypeOptions) - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Sets the width type for flange.
- setWidthValue(double) - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
License requirements: None.
- setWidthValueAsString(String) - Method in interface nxopen.blockstyler.TextColorFontWidth
-
License requirements: None.
- setWindCatcherDuct(Stock) - Method in interface nxopen.routing.WindCatcherBuilder
-
License requirements: routing_hvac ("Routing HVAC")
.
- setWindowIndex(int) - Method in interface nxopen.cae.GraphFromResultProbeBuilder
-
The window index will be set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- setWindowType(AllAroundVisionBuilder.WindowTypes) - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
License requirements: nx_general_packaging ("NX General Packaging")
.
- setWireColorCode(AmeElectricalConnectionPotentialType, String) - Method in interface nxopen.ame.ElectricalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setWireCrossSection(AmeElectricalConnectionPotentialType, double) - Method in interface nxopen.ame.ElectricalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setWireDiameter(double) - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setWireEdmFeedRate(String, double, int) - Method in interface nxopen.cam.CAMObject
-
Set feed rate value and side to the parameter index for the object, side is only used in wire edm.
- setWireEDMStartHoles(boolean) - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWireFrame(boolean) - Method in interface nxopen.JtCreator
-
License requirements: None.
- setWireframeBlendOptions(PartVisualizationEmphasis.WireframeBlendOptions) - Method in interface nxopen.preferences.PartVisualizationEmphasis
-
Modifies options that control the color-blending effect used to
de-emphasize wireframe geometry.
- setWireframeColorSource(GeneralWireframeColorSourceOption) - Method in interface nxopen.drawings.GeneralViewStyle
-
Sets the source of the wireframe color for a member view.
- setWireframeColorSource(GeneralWireframeColorSourceOption) - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
License requirements: drafting ("DRAFTING")
.
- setWireframeColorSource(GeneralWireframeColorSourceOption) - Method in interface nxopen.preferences.GeneralViewPreferences
-
Sets the source of the wireframe color for a member view.
- setWireframeContrast(boolean) - Method in interface nxopen.preferences.VisualizationLine
-
Sets whether colors applied to wireframe geometry are automatically adjusted as necessary to produce a minimum contrast relative to the view background.
- setWireframeGeometryImportColor(int) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the wireframe geometry import color for I-DEAS
License requirements: None.
- setWireframeGeometryImportLayer(int) - Method in interface nxopen.preferences.SessionNXGateway
-
Sets the wireframe geometry import layer for I-DEAS
License requirements: None.
- setWirePosition(WedmCutParameters.WirePositionTypes) - Method in interface nxopen.cam.WedmCutParameters
-
License requirements: cam_base ("CAM BASE")
.
- setWireSpacing(double) - Method in interface nxopen.routing.electrical.CableStockDefinition
-
Sets the separation between wires in a cable.
- setWireType(AmeElectricalConnectionPotentialType, String) - Method in interface nxopen.ame.ElectricalConnectionSettingsBuilder
-
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- setWireType(String) - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Sets the wire type of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- setWithOrientation(boolean) - Method in interface nxopen.cae.connections.Sealing
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setWithoutFalseBody(boolean) - Method in interface nxopen.tooling.DieInsertBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWithoutFalseBody(boolean) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWithoutWorkflow(boolean) - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setWithoutWorkflowSheet(Body) - Method in interface nxopen.die.PierceTaskBuilder
-
License requirements: die_engineering ("DIE ENGINEERING")
.
- setWithScale(boolean) - Method in interface nxopen.blockstyler.AngularDimension
-
License requirements: None.
- setWithScale(boolean) - Method in interface nxopen.blockstyler.ExpressionBlock
-
License requirements: None.
- setWithScale(boolean) - Method in interface nxopen.blockstyler.LinearDimension
-
License requirements: None.
- setWithScale(boolean) - Method in interface nxopen.blockstyler.OnPathDimension
-
License requirements: None.
- setWithScale(boolean) - Method in interface nxopen.blockstyler.RadiusDimension
-
License requirements: None.
- setWizardType(int) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.CompDrawingBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(ToolingApplication) - Method in interface nxopen.tooling.CopySolidBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.ShimBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.SpecialFormingBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.SplitInsertBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- setWizardType(int) - Method in interface nxopen.tooling.ToolingSession
-
Sets the wizard type of tooling application.
- setWordWrap(boolean) - Method in interface nxopen.blockstyler.Label
-
License requirements: None.
- setWork(BasePart) - Method in interface nxopen.PartCollection
-
Sets the current work part in the active display part.
- setWorkAreaLength(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setWorkAreaWidth(double) - Method in interface nxopen.tooling.QuickQuotationBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setWorkComponent(Component) - Method in interface nxopen.PartCollection
-
Sets the work component in the currently active display part.
- setWorkComponent(Component, PartCollection.RefsetOption, PartCollection.WorkComponentOption) - Method in interface nxopen.PartCollection
-
Sets the work component in the active display part.
- setWorkComponentOverride(Component) - Method in interface nxopen.PartCollection
-
Sets the component with override part as the work component in the active display part.
- setWorkCoordinateSystem(CoordinateSystem) - Method in interface nxopen.weld.ExportWeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setWorkflow(DxfdwgImporter.WorkflowAs) - Method in interface nxopen.DxfdwgImporter
-
License requirements: None.
- setWorkingList(PenetrationSite, PenetrationList) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Set current
PenetrationList
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- setWorkingList(IssueList) - Method in interface nxopen.issue.IssueManager
-
Sets the current working
IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- setWorkingPart(NXObject) - Method in interface nxopen.tooling.EjectorTableBuilder
-
License requirements: ug_mold_design ("UG MOLD")
.
- setWorkLayer(int) - Method in interface nxopen.layer.LayerManager
-
Sets the work layer.
- setWorkModeWeight(int, double) - Method in interface nxopen.cae.PreTestSolution
-
Sets weight for a specific work mode
License requirements: nx_correl_base ("FE Correlation")
.
- setWorkObjectToRootObjectMap(TaggedObject[], TaggedObject[]) - Method in interface nxopen.pdm.SmartSaveContext
-
Adds the given set of work object to root object pairs to the context
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- setWorkOccurrence(Tag) - Method in interface nxopen.uf.UFAssem
-
- setWorkOffset(int) - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
License requirements: None.
- setWorkOffset(int) - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
License requirements: None.
- setWorkPart(TaggedObject) - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
License requirements: None.
- setWorkPart(BasePart) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Set work part
License requirements: None.
- setWorkPart(Tag) - Method in interface nxopen.uf.UFAssem
-
- setWorkPart(Part) - Method in interface nxopen.weld.WeldJointBuilder
-
License requirements: structure_weld ("STRUCTURE WELD")
.
- setWorkPartDisplayAsEntirePart(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the work part display as entire part option
License requirements: None.
- setWorkPartEmphasis(boolean) - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Sets the setting that controls whether or not the work part is
emphasized.
- setWorkPartEmphasize(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
- setWorkPartMaintain(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
- setWorkPartQuietly(Tag) - Method in interface nxopen.uf.UFAssem
-
- setWorkPartWarnOnAutomaticChange(boolean) - Method in interface nxopen.preferences.SessionAssemblies
-
Sets the warn on automatic change for work part option
License requirements: None.
- setWorkpieceFace(Face) - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- setWorkpieceNameFilter(String) - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- setWorkpieceString(String) - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setWorkPlaneDimClr(int) - Method in interface nxopen.uf.UFDisp
-
- setWorkPlaneEmphasis(int) - Method in interface nxopen.uf.UFDisp
-
- setWorkPlaneSel(int) - Method in interface nxopen.uf.UFDisp
-
- setWorkPositionAngle(double) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setWorkPositionAngleType(KinematicComponentBuilder.WorkPositionAngleTypes) - Method in interface nxopen.sim.KinematicComponentBuilder
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setWorkRegionDefinitionMethod(DefineWorkRegionBuilder.WorkRegionDefinitionMethods) - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setWorkSolution(SimSolution) - Method in interface nxopen.cae.CorrelSolutionBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setWorkView(View) - Method in interface nxopen.geometricutilities.SupportPlaneData
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setWrapMethod(InsulationBuilder.WrapType) - Method in interface nxopen.mechanicalrouting.InsulationBuilder
-
License requirements: routing_base ("Routing Basic")
.
- setWrapMethod(OverstockBuilder.WrapType) - Method in interface nxopen.routing.OverstockBuilder
-
License requirements: routing_advanced ("Routing Advanced") OR routing_harness ("Routing Harness") OR routing_cabling ("Routing Cabling") OR routing_pipetube ("Routing Piping and Tubing") OR routing_hvac ("Routing HVAC") OR routing_platform ("Routing Platform") OR routing_pid ("Routing PID")
.
- setWrappedOverstockLengthCalculationPlugin(CustomManager.WrappedOverstockLengthCalculationPlugin) - Method in interface nxopen.routing.CustomManager
-
Sets the plugin called by Routing to calculate the length of a wrapped overstock.
- setWrapSpin(boolean) - Method in interface nxopen.blockstyler.DoubleBlock
-
License requirements: None.
- setWrapSpin(boolean) - Method in interface nxopen.blockstyler.DoubleTable
-
License requirements: None.
- setWrapSpin(boolean) - Method in interface nxopen.blockstyler.IntegerBlock
-
License requirements: None.
- setWrapSpin(boolean) - Method in interface nxopen.blockstyler.IntegerTable
-
License requirements: None.
- setWrenchSize(double) - Method in interface nxopen.cam.LaserCutoutDefinition
-
License requirements: cam_base ("CAM BASE")
.
- setWriteSolidAs(Catiav4Creator.SolidBodyOutputOption) - Method in interface nxopen.Catiav4Creator
-
License requirements: None.
- setWrkPt1(Point) - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setWrkPt2(Point) - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setWrkPt3(Point) - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
License requirements: nx_correl_base ("FE Correlation")
.
- setWScale(double) - Method in interface nxopen.geometricutilities.FrameOnPathBuilder
-
License requirements: None.
- setWScale(double) - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
License requirements: None.
- setX(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setX(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: None.
- setX(double) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setX(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setXAxis(Vector3d) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setXAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setXAxis(double) - Method in interface nxopen.cam.AlongMcsAxisMoveBuilder
-
License requirements: None.
- setXAxis(Direction) - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
.
- setXAxis(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setXAxis(Vector3d) - Method in interface nxopen.geometricutilities.AnchorLocatorBuilder
-
License requirements: None.
- setXaxisOption(PostGraphAlongPathBuilder.Xaxis) - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setXAxisType(GraphBuilder.XAxisTypeChoices) - Method in interface nxopen.motion.GraphBuilder
-
- setXcMapping(TurnOrientWcs.XcMappingTypes) - Method in interface nxopen.cam.TurnOrientWcs
-
License requirements: None.
- setXCoefficientsType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setXCoordinate(double) - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setXCoordinate(double) - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder
-
- setXCoordinate(double) - Method in interface nxopen.weld.DatumSurfaceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setXCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.ArrayRecord2D
-
Sets X-Coordinate unit
License requirements: None.
- setXCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord
-
License requirements: None.
- setXCount(int) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the x count of pressure systems.
- setXCurve(GraphBuilder.CurveData) - Method in interface nxopen.motion.GraphBuilder
-
- setXCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setXDatumFilter(ShipSectionBuilder.XFilter) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setXDimension(double) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setXDimension(double) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setXDimension(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setXDimension(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setXDirection(Direction) - Method in interface nxopen.drawings.OvtBuilder
-
License requirements: drafting ("DRAFTING")
.
- setXDirection(Direction) - Method in interface nxopen.drawings.ProjectedViewOrientationBuilder
-
License requirements: drafting ("DRAFTING")
.
- setXDirection(Direction) - Method in interface nxopen.drawings.SvtBuilder
-
License requirements: drafting ("DRAFTING")
.
- setXDirection(ShipCoordinatesBuilder.XDirectionType) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setXDirection(Direction) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setXDirectionDelta(String) - Method in interface nxopen.geometricutilities.PatternClocking
-
- setXDirectionType(int) - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setXDisplay(PlotBuilder.XdisplayOption) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setXDistance(double) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the x distance of pressure systems.
- setXDistance(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the x distance of die ribs.
- setXDistance(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setXDistanceBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setXDistanceFirst(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setXDistanceSecond(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setXEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setXFlip(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setXformTagOfDatumCsys(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- setXFrameOption(String) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setXFunction(Function) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setXFunction(Function) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setXhatchMat(String, String, int) - Method in interface nxopen.uf.UFDrf
-
- setXMaxDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setXMinDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setXmlFolderBrowser(String) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setXmlFolderBrowser(String) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setXNum(int) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setXoffset(double) - Method in interface nxopen.cam.RotateToolMoveBuilder
-
License requirements: None.
- setXoffset(int, double) - Method in interface nxopen.cam.ToolTrackingPointBuilder
-
Set the X offset
License requirements: None.
- setXOffset(double) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the x offset of pressure systems.
- setXOffset(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the x offset of die ribs.
- setXOffset(double) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setXoffsetToggle(boolean) - Method in interface nxopen.cam.RotateToolMoveBuilder
-
License requirements: None.
- setXoffsetToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setXoffsetToggle(int, boolean) - Method in interface nxopen.cam.ToolTrackingPointBuilder
-
Set the X offset Toggle Status
License requirements: None.
- setXOption(boolean) - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setXOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setXPath(Section) - Method in interface nxopen.geometricutilities.AlongPathPattern
-
License requirements: None.
- setXPathOption(AlongPathPattern.PathOptions) - Method in interface nxopen.geometricutilities.AlongPathPattern
-
License requirements: None.
- setXPlaneUserDefined(boolean) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setXPosition(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setXRayCage(boolean) - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setXref(LayoutBuilder.XrefNum) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setXresultComponent(Result.Component) - Method in interface nxopen.cae.PostGraphOrbitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setXRotationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXRotationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXRotationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXScaleFactor(double) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setXSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setXShift(double) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setXStiffnessDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setXStructuralDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setXSumInteger(int) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setXSymmetryToggle(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setXtDatumLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXtDistance(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXtFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXtMethod(InspectionAlignmentBuilder.XtMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXTranslationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXTranslationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXTranslationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setXVector(Direction) - Method in interface nxopen.features.PatternFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setXVectorForEqualArcLength(Direction) - Method in interface nxopen.features.ProjectCurveBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setXViscousDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setXyClip(Tag, double[]) - Method in interface nxopen.uf.UFView
-
- setXyDirectionOfXform(Tag, double[], double[]) - Method in interface nxopen.uf.UFSo
-
- setXyGridStyle(GridStyle) - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
License requirements: None.
- setXyz(CurveCurvatureAnalysisBuilder.XyzTypes) - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
License requirements: None.
- setXyzDirection(DeviationGaugeBuilder.XyzDirectionType) - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- setY(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setY(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: None.
- setY(double) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setY(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setYAxis(Vector3d) - Method in interface nxopen.blockstyler.SpecifyOrientation
-
License requirements: None.
- setYAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setYAxis(double) - Method in interface nxopen.cam.AlongMcsAxisMoveBuilder
-
License requirements: None.
- setYAxis(Vector3d) - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setYAxis(Vector3d) - Method in interface nxopen.geometricutilities.AnchorLocatorBuilder
-
License requirements: None.
- setYcMapping(TurnOrientWcs.YcMappingTypes) - Method in interface nxopen.cam.TurnOrientWcs
-
License requirements: None.
- setYCoefficientsType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setYCoordinate(double) - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
License requirements: nx_layout ("NX Layout")
.
- setYCoordinate(double) - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder
-
- setYCoordinate(double) - Method in interface nxopen.weld.DatumSurfaceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setYCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.ArrayRecord2D
-
Sets Y-Coordinate unit
License requirements: None.
- setYCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord
-
License requirements: None.
- setYCount(int) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the y count of pressure systems.
- setYCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setYCurve(MotionFunction) - Method in interface nxopen.motion.SegmentBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setYDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setYDimension(double) - Method in interface nxopen.CGMBuilder
-
License requirements: None.
- setYDimension(double) - Method in interface nxopen.PrintPDFBuilder
-
License requirements: None.
- setYDimension(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setYDimension(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setYDirection(ShipCoordinatesBuilder.YDirectionType) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setYDirection(Direction) - Method in interface nxopen.geometricutilities.AlongPathPattern
-
License requirements: None.
- setYDirection(Direction) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setYDirectionDelta(String) - Method in interface nxopen.geometricutilities.PatternClocking
-
- setYDirectionOption(AlongPathPattern.YDirectionOptions) - Method in interface nxopen.geometricutilities.AlongPathPattern
-
License requirements: None.
- setYDisplay(PlotBuilder.YdisplayOption) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setYDistance(double) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the y distance of pressure systems.
- setYDistance(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the y distance of die ribs.
- setYDistance(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setYDistanceBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setYDistanceFirst(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setYDistanceSecond(double) - Method in interface nxopen.tooling.DieBaseBuilder
-
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard")
.
- setYear(String) - Method in interface nxopen.DateItemBuilder
-
License requirements: None.
- setYellowPoint(double) - Method in interface nxopen.cae.LaminateFiberOrientationOptionsBuilder
-
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- setYEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setYFlip(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setYFrameEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setYFrameOption(String) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setYFunction(Function) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setYFunction(Function) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setYMaxDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setYMinDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setYNum(int) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setYoffset(double) - Method in interface nxopen.cam.RotateToolMoveBuilder
-
License requirements: None.
- setYoffset(int, double) - Method in interface nxopen.cam.ToolTrackingPointBuilder
-
Set the Y offset
License requirements: None.
- setYOffset(double) - Method in interface nxopen.die.PressureSystemParentBuilder
-
Sets the y offset of pressure systems.
- setYOffset(double) - Method in interface nxopen.die.RibParentBuilder
-
Sets the y offset of die ribs.
- setYOffset(double) - Method in interface nxopen.PlotBuilder
-
License requirements: None.
- setYoffsetToggle(boolean) - Method in interface nxopen.cam.RotateToolMoveBuilder
-
License requirements: None.
- setYoffsetToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setYoffsetToggle(int, boolean) - Method in interface nxopen.cam.ToolTrackingPointBuilder
-
Set the Y offset Toggle Status
License requirements: None.
- setYokeType(JointFrictionAdams.FrictionYokeType) - Method in interface nxopen.motion.JointFrictionAdams
-
Sets the yoke type
License requirements: mechanisms ("MECHANISMS")
.
- setYokeType(JointFrictionRecurDyn.FrictionYokeType) - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Sets the yoke type
License requirements: mechanisms ("MECHANISMS")
.
- setYOption(boolean) - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setYOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setYPath(Section) - Method in interface nxopen.geometricutilities.AlongPathPattern
-
License requirements: None.
- setYPathOption(AlongPathPattern.PathOptions) - Method in interface nxopen.geometricutilities.AlongPathPattern
-
License requirements: None.
- setYPlaneUserDefined(boolean) - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- setYPosition(double) - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
License requirements: nx_ship_drafting ("Ship Drafting")
.
- setYref(LayoutBuilder.YrefNum) - Method in interface nxopen.tooling.LayoutBuilder
-
License requirements: None.
- setYresultComponent(Result.Component) - Method in interface nxopen.cae.PostGraphOrbitBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- setYRotationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYRotationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYRotationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYScaleFactor(double) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setYSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setYShift(double) - Method in interface nxopen.tooling.BlankLayoutBuilder
-
License requirements: None.
- setYStiffnessDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setYStructuralDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setYSumInteger(int) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setYSymmetryToggle(boolean) - Method in interface nxopen.geometricutilities.RectangularPattern
-
License requirements: None.
- setYtDatumLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYtDistance(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYtFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYtMethod(InspectionAlignmentBuilder.YtMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYTranslationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYTranslationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYTranslationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setYVector(Direction) - Method in interface nxopen.features.PatternFaceBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setYViscousDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setZ(double) - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZ(double) - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
License requirements: None.
- setZ(String) - Method in interface nxopen.sim.KinematicChain
-
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- setZagLeadAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setZagRotationAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setZagRotationAxis(Direction) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setZagTiltAngle(double) - Method in interface nxopen.cam.ToolAxisVariable
-
License requirements: cam_base ("CAM BASE")
.
- setZAxis(double) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setZAxis(double) - Method in interface nxopen.cam.AlongMcsAxisMoveBuilder
-
License requirements: None.
- setZAxis(Direction) - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder
-
License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
.
- setZcConstant(double) - Method in interface nxopen.cam.DrillSurfaceBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setZClip(Tag, int[], double[]) - Method in interface nxopen.uf.UFView
-
- setZCoefficientsType(ConnectorCoefficientTypes) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setZCoordinate(double) - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder
-
- setZCoordinate(double) - Method in interface nxopen.weld.DatumSurfaceBuilder
-
License requirements: ugweld ("UG WELD")
.
- setZCoordinatePoints(double[]) - Method in interface nxopen.cae.ftk.ArrayRecord3D
-
Sets Z-Coordinate points
License requirements: None.
- setZCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.ArrayRecord3D
-
Sets Z-Coordinate unit
License requirements: None.
- setZCoordinateUnit(BaseUnit) - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord
-
License requirements: None.
- setZCurve(MotionFunction) - Method in interface nxopen.motion.RoadBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setZCurve(MotionFunction) - Method in interface nxopen.motion.SegmentBuilder
-
License requirements: mechanisms ("MECHANISMS")
.
- setZCustomMarkerLabel(String) - Method in interface nxopen.cae.xyplot.PlotGraphTemplate
-
License requirements: None.
- setZDatumFilter(ShipSectionBuilder.ZFilter) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setZDepth(int) - Method in interface nxopen.diagramming.SheetElementBuilder
-
License requirements: None.
- setZdepthOffset(double) - Method in interface nxopen.cam.PlanarMillingBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setZDimension(double) - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
License requirements: None.
- setZDimension(double) - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
License requirements: None.
- setZDirection(ShipCoordinatesBuilder.ZDirectionType) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setZDistance(double) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setZDistanceBuilder(double) - Method in interface nxopen.cam.MachineHeadGroupBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setZEnabled(boolean) - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setZeroDisplay(TableCellStyleBuilder.ZeroDisplayType) - Method in interface nxopen.annotations.TableCellStyleBuilder
-
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- setZeroDisplay(ZeroDisplay) - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
License requirements: None.
- setZeroMeanCorrection(boolean) - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
-
License requirements: nx_response_anlys ("NX Response Analysis")
.
- setZeroSlopeRadiusFunctionAtChainEnds(boolean) - Method in interface nxopen.features.EdgeBlendBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING")
.
- setZeroThicknessColor(NXColor) - Method in interface nxopen.cae.ThicknessBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setZeroToleranceDisplayStyle(ZeroToleranceDisplayStyle) - Method in interface nxopen.annotations.AngularTolerance
-
License requirements: None.
- setZeroToleranceDisplayStyle(ZeroToleranceDisplayStyle) - Method in interface nxopen.annotations.DimensionPreferences
-
- setZeroToleranceDisplayStyle(ZeroToleranceDisplayStyle) - Method in interface nxopen.annotations.LinearTolerance
-
License requirements: None.
- setZFrameEnum(ShipIntersectionsBuilder.Type) - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
.
- setZFrameOption(String) - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design") OR routing_base ("Routing Basic")
.
- setZFunction(Function) - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
License requirements: mechanisms ("MECHANISMS")
.
- setZFunction(Function) - Method in interface nxopen.motion.VObject
-
License requirements: mechanisms ("MECHANISMS")
.
- setZigZagDir(UFVariant, UFDrpos.ZigZagDir) - Method in interface nxopen.uf.UFDrpos
-
- setZMaxDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setZMinDatumFilter(int) - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_detail ("Ship Detail Design")
.
- setZNum(int) - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
License requirements: None.
- setZoffset(double) - Method in interface nxopen.cam.RotateToolMoveBuilder
-
License requirements: None.
- setZoffset(int, double) - Method in interface nxopen.cam.ToolTrackingPointBuilder
-
Set the Z offset
License requirements: None.
- setZoffsetState(ShellEADBuilder.State) - Method in interface nxopen.cae.ShellEADBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setZoffsetToggle(boolean) - Method in interface nxopen.cam.RotateToolMoveBuilder
-
License requirements: None.
- setZoffsetToggle(boolean) - Method in interface nxopen.cam.ToolChangeCiBuilder
-
License requirements: cam_base ("CAM BASE")
.
- setZoffsetToggle(int, boolean) - Method in interface nxopen.cam.ToolTrackingPointBuilder
-
Set the Z offset Toggle Status
License requirements: None.
- setZonePoint(Point3d) - Method in interface nxopen.features.AssociativeArcBuilder
-
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- setZoneShape(FeatureControlFrameDataBuilder.ToleranceZoneShape) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
License requirements: drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- setZoneShapeType(SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions) - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
License requirements: None.
- setZoomScale(double) - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
License requirements: None.
- setZoomSensitivity(int) - Method in interface nxopen.display.NonProportionalZoom
-
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- setZOption(boolean) - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setZOutput(boolean) - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
License requirements: None.
- setZRotationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZRotationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZRotationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZScaleFactor(double) - Method in interface nxopen.cae.NodeTranslateBuilder
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setZSegments(int) - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
License requirements: nx_subdivision (" NX SUBDIVISION")
.
- setZStiffnessDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setZStructuralDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setZSumInteger(int) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- setZtDatumLetter(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZtDistance(double) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZtFeature(String) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZtMethod(InspectionAlignmentBuilder.ZtMethods) - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZTranslationDOFMode(InspectionMethodBuilder.ToleranceDegreeOfFreedomMode) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZTranslationLowerLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZTranslationUpperLimit(double) - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- setZViscousDampingDynamic(ScalarFieldWrapper) - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
License requirements: nx_masterfem ("Finite Element Modeling")
.
- setZxGridStyle(GridStyle) - Method in interface nxopen.cae.xyplot.GridLayoutStyle3DSetting
-
License requirements: None.
- setZyGridStyle(GridStyle) - Method in interface nxopen.cae.xyplot.GridLayoutStyle3DSetting
-
License requirements: None.
- SEVEN - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Width Seven
- SEVEN - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Width Seven
- SEVEN - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Width Seven
- SEVEN - Static variable in class nxopen.annotations.LineWidth
-
Width Seven
- SEVEN - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Width Seven
- SEVEN - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Width Seven
- SEVEN - Static variable in class nxopen.cae.FluidDomainBuilder.SubdivisionType
-
- SEVEN - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
- SEVEN - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
-
- SEVEN - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
- SEVEN - Static variable in class nxopen.die.SpringbackCompensationBuilder.DegreeType
-
Degree is 7
- SEVEN - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- SEVEN - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- SEVEN - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Seven
- SEVEN - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Deprecated.
Width Seven
- SEVEN - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
- SEVEN - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
- SEVEN - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions
-
Display in 7 colors.
- SEVEN - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- SEVEN - Static variable in class nxopen.preferences.Width
-
Width Seven
- SEVEN - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- SEVENTH - Static variable in class nxopen.weld.WeldGroupIdColor
-
Seventh Group Id Color Index
- severityOption() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the severity option
License requirements: None.
- sew() - Method in interface nxopen.AcisImporter
-
Returns the Sew - if value set to true then automatic sewing will be done
License requirements: None.
- SEW - Static variable in class nxopen.features.PatchOpeningsBuilder.OutputTypes
-
Sew patch sheet bodies into target sheet body
- Sew - Interface in nxopen.features
-
Represents a sew feature.
- SEW - Static variable in class nxopen.geometricutilities.BooleanOperation.BooleanType
-
Sew
- sewAllFaces() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the sew option for face blend
License requirements: None.
- sewAllInstances() - Method in interface nxopen.features.SewBuilder
-
- SewBuilder - Interface in nxopen.features
-
Represents a
Sew
builder.
- SewBuilder.Types - Class in nxopen.features
-
Specifies the sew type.
- SewFacetBodyBuilder - Interface in nxopen.facet
-
- SewFacetBodyBuilder.Input - Class in nxopen.facet
-
Represents the option for keeping, deleting or hiding input two facet bodies after builder committing
- SewFacetBodyBuilder.VertexIndex - Class in nxopen.facet
-
Index of the vertex
- sewId - Variable in class nxopen.uf.UFModeling.CreateSewData
-
- sewList - Variable in class nxopen.uf.UFModeling.CreateMultipleSewsData
-
- sewn() - Method in interface nxopen.die.AddSurfBuilder
-
Returns the flag that indicates whether the faces of the addendum sheet body will be sewn into one sheet body
or individual sheet bodies for each face will be output.
- sewSurfaces() - Method in interface nxopen.IgesImporter
-
Returns the sew surfaces - set this to true if automatic sewing of surfaces is desired
License requirements: None.
- sewSurfaces() - Method in interface nxopen.Step203Importer
-
Returns the sew surfaces - if set to true surfaces will be sewed automatically
License requirements: None.
- sewSurfaces() - Method in interface nxopen.Step214Importer
-
Returns the sew surfaces - if set to true surfaces will be sewed automatically
License requirements: None.
- sewSurfaces() - Method in interface nxopen.Step242Importer
-
Returns the sew surfaces - if set to true surfaces will be sewed automatically
License requirements: None.
- sewToBody() - Method in interface nxopen.features.BlendCornerBuilder
-
Returns the sew to body
License requirements: None.
- sewTolerance() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder
-
Returns the sew tolerance
License requirements: None.
- sewTolerance() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Returns the sew tolerance for sewing sheets
License requirements: None.
- sewWaveLinkedFaceAndGuidedExtensionSheet() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Sew wave linked face and guided extension sheet.
- sf() - Method in interface nxopen.UFSession
-
- Sf1dMeshData() - Constructor for class nxopen.uf.UFSf.Sf1dMeshData
-
- Sf1dMeshData(UFSf.Sf1dElementType, UFSf.Sf1dDensityType, double, int, double) - Constructor for class nxopen.uf.UFSf.Sf1dMeshData
-
- sfCurve() - Method in interface nxopen.UFSession
-
- SFEM_PART_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- sfl() - Method in interface nxopen.UFSession
-
- SFLANGE_ABSOLUTE_GAP - Static variable in class nxopen.uf.UFModl.SflangeType
-
- SFLANGE_BASIC - Static variable in class nxopen.uf.UFModl.SflangeType
-
- SFLANGE_CONTINUITY_G0 - Static variable in class nxopen.uf.UFModl.SflangeContinuity
-
- SFLANGE_CONTINUITY_G1 - Static variable in class nxopen.uf.UFModl.SflangeContinuity
-
- SFLANGE_CONTINUITY_G2 - Static variable in class nxopen.uf.UFModl.SflangeContinuity
-
- SFLANGE_DIR_NORMAL - Static variable in class nxopen.uf.UFModl.SflangeDir
-
- SFLANGE_DIR_NORMAL_DRAFT - Static variable in class nxopen.uf.UFModl.SflangeDir
-
- SFLANGE_DIR_VECTOR - Static variable in class nxopen.uf.UFModl.SflangeDir
-
- SFLANGE_DIR_VECTOR_DRAFT - Static variable in class nxopen.uf.UFModl.SflangeDir
-
- SFLANGE_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
- SFLANGE_NO_SEW - Static variable in class nxopen.uf.UFModl.SflangeTrim
-
- SFLANGE_NO_TRIM - Static variable in class nxopen.uf.UFModl.SflangeTrim
-
- SFLANGE_NO_TRIM_SEW - Static variable in class nxopen.uf.UFModl.SflangeTrim
-
- SFLANGE_TRIM_SEW - Static variable in class nxopen.uf.UFModl.SflangeTrim
-
- SFLANGE_VISUAL_GAP - Static variable in class nxopen.uf.UFModl.SflangeType
-
- sfLegend() - Method in interface nxopen.UFSession
-
- sfPost() - Method in interface nxopen.UFSession
-
- SgrpCoordinatesData() - Constructor for class nxopen.HumanPosturePredictionBuilder.SgrpCoordinatesData
-
- sgRPHeight() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the SgRP height
License requirements: None.
- sgRPLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the SgRP length
License requirements: None.
- sgrpPoint() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the SgRp point
License requirements: None.
- sgRPWidth() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the SgRP width
License requirements: None.
- sgrpXvalDim() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the dimension expression for the X coordinate of SgRp
License requirements: None.
- sgrpYvalDim() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the dimension expression for the Y coordinate of SgRp
License requirements: None.
- sgrpZvalDim() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the dimension expression for the Z coordinate of SgRp
License requirements: None.
- sGuide - Variable in class nxopen.uf.UFModlFeatures.AskSweepData
-
- SH1 - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.DrawingCreateOrEdit
-
- SH1 - Static variable in class nxopen.tooling.EWDraftingBuilder.NameOption
-
sh1 sheet name
- SH2 - Static variable in class nxopen.tooling.EWDraftingBuilder.NameOption
-
sh2 sheet name
- SH_AUTHOR - Static variable in class nxopen.uf.UFDisp.MaterialFormatType
-
- SH_IRAYPLUS - Static variable in class nxopen.uf.UFDisp.MaterialFormatType
-
- SH_MAX - Static variable in class nxopen.uf.UFDisp.MaterialFormatType
-
- SHADED - Static variable in class nxopen.cae.ModelDisplayBuilder.ElemQualPass
-
Draw passing elements shaded
- SHADED - Static variable in class nxopen.cae.Post.LimitDisplay
-
- SHADED - Static variable in class nxopen.cae.xyplot.BarColorOption
-
Fill Color or contour color with shading
- SHADED - Static variable in class nxopen.cae.xyplot.PlateColorOption
-
Fill Color with shading
- SHADED - Static variable in class nxopen.cae.xyplot.SurfaceColorOption
-
Fill Color or contour color with shading
- SHADED - Static variable in class nxopen.display.PointCloudBuilder.BrightnessModes
-
Shaded
- SHADED - Static variable in class nxopen.drawings.ViewSettingsBuilder.RenderingStyleEnum
-
- SHADED - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Style
-
- SHADED - Static variable in class nxopen.preferences.PartDrafting.ViewStyleType
-
Shaded
- SHADED - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
-
- SHADED - Static variable in class nxopen.PrintBuilder.OutputOption
-
Shaded with Original Background
- SHADED - Static variable in class nxopen.View.RenderingStyleType
-
- SHADED_EDGE_COLOR - Static variable in class nxopen.preferences.ViewVisualizationVisual.ShadedEdgeStyleType
-
- SHADED_EDGE_STYLE_BODY_COLOR - Static variable in class nxopen.uf.UFView.ShadedEdgeStyle
-
- SHADED_EDGE_STYLE_OFF - Static variable in class nxopen.uf.UFView.ShadedEdgeStyle
-
- SHADED_EDGE_STYLE_SHADED_EDGE_COLOR - Static variable in class nxopen.uf.UFView.ShadedEdgeStyle
-
- SHADED_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle
-
- SHADED_WITH_BODY_COLOR_EDGES - Static variable in class nxopen.View.RenderingStyleType
-
- SHADED_WITH_EDGES - Static variable in class nxopen.View.RenderingStyleType
-
- shadedAlignFacets() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the state of whether facets for shaded views should be aligned along
common edges.
- shadedCutFaceColor() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the shaded cut face color.
- shadedCutFaceColor() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the shaded cut face color.
- shadedDisplay() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the toggle for display through shaded models
License requirements: None.
- shadedEdgeColor() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults2d
-
Returns the element shaded edge color.
- shadedEdgeColor() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults3d
-
Returns the element shaded edge color.
- shadedEdgeColor() - Method in interface nxopen.cae.MeshDisplaySettings2d
-
Returns the element shaded edge color.
- shadedEdgeColor() - Method in interface nxopen.cae.MeshDisplaySettings3d
-
Returns the element shaded edge color.
- shadedEdgeColor() - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Returns the edge color for shaded faces in the view.
- shadedEdgeColor - Variable in class nxopen.uf.UFView.ShadedEdgeOptions
-
- ShadedEdgeOptions() - Constructor for class nxopen.uf.UFView.ShadedEdgeOptions
-
- ShadedEdgeOptions(UFView.ShadedEdgeStyle, int, UFView.HiddenEdgeStyle) - Constructor for class nxopen.uf.UFView.ShadedEdgeOptions
-
- shadedEdgeStyle() - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Returns the edge display style for shaded faces in the view.
- shadedEdgeStyle - Variable in class nxopen.uf.UFView.ShadedEdgeOptions
-
- shadedFacetRatio() - Method in interface nxopen.display.FacetSettingsBuilder
-
- shadedFacetScale() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the facet scale to use for Shaded Views
License requirements: None.
- shadedFacetToViewRatio() - Method in interface nxopen.display.FacetSettingsBuilder
-
- shadedGeometry() - Method in interface nxopen.CGMBuilder
-
Returns the Shaded Geometry as Wireframe option.
- shadedGeometry() - Method in interface nxopen.PlotBuilder
-
Returns the shaded geometry as wireframe option.
- shadedGeometry() - Method in interface nxopen.PrintBuilder
-
Returns the shaded geometry as wireframe option.
- shadedGeometry() - Method in interface nxopen.PrintPDFBuilder
-
Returns the Shaded Geometry as Wireframe option.
- shadedPlane() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the shaded plane
License requirements: None.
- shadedRefinementFactor() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the refinement factor to use for Shaded Views
License requirements: None.
- shadedTolerance() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the tolerance setting to use for Shaded Views
License requirements: None.
- shadedUpdate() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the update mode to use for Shaded Views
License requirements: None.
- ShadedViewFacetTolerancesData() - Constructor for class nxopen.preferences.PartVisualizationShade.ShadedViewFacetTolerancesData
-
- shadedViewsType() - Method in interface nxopen.display.SelPref
-
Returns the shaded views type
License requirements: None.
- shadedViewTolerance() - Method in interface nxopen.preferences.PartVisualizationShade
-
Returns the tolerance for shaded views.
- shadedViewUpdateMode() - Method in interface nxopen.preferences.PartVisualizationShade
-
Returns the update mode for shaded views.
- shadeEdgeColor - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- shadeGraphicSymbol() - Method in interface nxopen.cae.CaeDOFSetDisplay
-
Returns the flag indicating whether or not shading of graphic symbols is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- shadeGraphicSymbol() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the flag indicating whether or not shading of graphic symbols is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- shadeMode - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- ShadeOptions() - Constructor for class nxopen.uf.UFDisp.ShadeOptions
-
- ShadeOptions(UFDisp.ShadeFormat, UFDisp.ShadeDisplay, int, UFDisp.ShadePlot, boolean, double, boolean, boolean, boolean, int, int, int, int, boolean, boolean) - Constructor for class nxopen.uf.UFDisp.ShadeOptions
-
- shadeSymbols() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the shade symbols
License requirements: None.
- shadeTolerance() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
Returns the shade tolerance option on the SHADING tab of the View Style Dialog
License requirements: None.
- shadeVisualization() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing Visualization preferences settings for shade tab applicable to displayed part .
- shading() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Shading .
- shading() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to Shading .
- ShadingRenderingStyleOption - Class in nxopen.preferences
-
Represents the rendering style options
- shadingTolerance() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the shading tolerance.
- shadingTolerance() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the shading tolerance.
- ShadingToleranceOption - Class in nxopen.preferences
-
Represents the Shade tolerance options
- ShadingViewPreferences - Interface in nxopen.preferences
-
Represents set of Shading View Preferences applicable to drafting views.
- ShadingViewStyle - Interface in nxopen.drawings
-
Represents set of Shading View style applicable to drafting views.
- SHADOW_CATCHER - Static variable in class nxopen.display.Wall.MaterialTextureType
-
The wall is transparent, and is used to display
shadows.
- SHADOW_CATCHER - Static variable in class nxopen.display.Wall.MaterialType
-
Deprecated.
The wall is transparent, and is used to display
shadows.
- shadowCastingDisabled() - Method in interface nxopen.display.CgfxMattexBuilder
-
- shadowCatcherSelection() - Method in interface nxopen.display.Shadows
-
Returns the Shadow Catcher Selection
License requirements: None.
- shadowCurveCount - Variable in class nxopen.uf.UFCurve.CreateShadowCurvesData
-
- shadowCurves - Variable in class nxopen.uf.UFCurve.CreateShadowCurvesData
-
- shadowGenerationSeconds - Variable in class nxopen.ModelingViewHighQualityImage.ImageCountsData
-
Number of seconds to generate the shadows
- Shadows - Interface in nxopen.display
-
Represents a
Shadows
This class is restricted to being called from a program running during an
Interactive NX session.
- shadows() - Method in interface nxopen.ModelingViewHighQualityImage
-
Returns the setting for whether the High Quality Image is to contain shadows
License requirements: None.
- Shadows.RealTimeState - Class in nxopen.display
-
Real time type settings - environment_shadow_catcher_only is enabled only in Basic Studio mode
- Shadows.SsaoContrastType - Class in nxopen.display
-
Shadows SSAO contrast settings
- Shadows.SsaoQualityType - Class in nxopen.display
-
Shadows SSAO quality settings
- shadowsEnabled() - Method in interface nxopen.display.Shadows
-
Returns the Overall Shadows
License requirements: None.
- shadowSoftness() - Method in interface nxopen.display.ImageBasedLighting
-
Returns the image-based lighting shadow softness
License requirements: None.
- shadowType() - Method in interface nxopen.display.ImageBasedLighting
-
Returns the shadow type
License requirements: None.
- SHAFT - Static variable in class nxopen.annotations.FitAnsiHoleType
-
Use shaft values for the ANSI limit and fit tolerance
- SHAFT_SIZE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- shaftLowerToleranceValue() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the shaft lower tolerance value of a dimension.
- shaftUpperToleranceValue() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the shaft upper tolerance value of a dimension.
- shallowCorner() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the corner shallow
License requirements: cam_base ("CAM BASE")
.
- shankClearance() - Method in interface nxopen.cam.CutParameters
-
Returns the Shank Clearance
License requirements: None.
- shankClearance() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
Returns the Shank Clearance
License requirements: None.
- shankDiameter() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the shank diameter
License requirements: None.
- shankElementType() - Method in interface nxopen.cae.BoltBuilder
-
Returns the element type to be created for the shank
License requirements: None.
- shankShape() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the shank shape.
- shanksToDelete() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the faces of those to be deleted shanks.
- shanksToDelete() - Method in interface nxopen.tooling.InsertEditToolsBuilder
-
Returns the shanks to delete
License requirements: None.
- SHAPE - Static variable in class nxopen.assemblies.DesignElementBuilder.StateType
-
Shape design element
- shape() - Method in interface nxopen.cae.FEElement
-
Returns the element shape
License requirements: None.
- shape() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
Returns the corner shape
License requirements: None.
- Shape - Interface in nxopen.diagramming
-
Represents the Shape class.
- shape() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
- shape() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
Returns the wheel fixing shape.
- SHAPE - Static variable in class nxopen.pdm.DesignElementRevision.DesignElementCategory
-
- shape() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the shape of the blank.
- shape - Variable in class nxopen.uf.UFPath.CircularMotion
-
- shape - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- SHAPE_CIRCULAR_CCW - Static variable in class nxopen.uf.UFPath.Shape
-
- SHAPE_CIRCULAR_CW - Static variable in class nxopen.uf.UFPath.Shape
-
- SHAPE_CURVE - Static variable in class nxopen.features.BridgeCurveBuilder.ShapeControlTypes
-
Deprecated.
shape curve
- SHAPE_CYLINDRICAL - Static variable in class nxopen.uf.UFGdt.ZoneShape
-
- SHAPE_DESIGN_ELEMENT - Static variable in class nxopen.assemblies.CollaborativeContentType
-
Shape Design Element in a Workset
- SHAPE_DESIGN_ELEMENT - Static variable in class nxopen.BasePart.CollaborativeContentType
-
Shape Design Part in a Workset
- SHAPE_DESIGN_ELEMENT - Static variable in class nxopen.issue.IssueAttachment.Type
-
Shape Design Element type
- SHAPE_FACTOR - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- SHAPE_HELICAL_CCW - Static variable in class nxopen.uf.UFPath.Shape
-
- SHAPE_HELICAL_CW - Static variable in class nxopen.uf.UFPath.Shape
-
- SHAPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Shape
-
- SHAPE_LINEAR - Static variable in class nxopen.uf.UFPath.Shape
-
- SHAPE_OFFSET - Static variable in class nxopen.uf.UFGdt.ZoneShape
-
- SHAPE_PLANAR - Static variable in class nxopen.uf.UFGdt.ZoneShape
-
- SHAPE_SPHERICAL - Static variable in class nxopen.uf.UFGdt.ZoneShape
-
- ShapeBuilder - Interface in nxopen.diagramming
-
Represents a ShapeBuilder.
- ShapeCollection - Interface in nxopen.diagramming
-
Represents a collection of Shape.
- shapeControl() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the shape control parameter.
- shapeControl() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the shape control
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- shapeControl - Variable in class nxopen.uf.UFModl.StycornerCrvOpt
-
- shapeControl1 - Variable in class nxopen.uf.UFCurve.BridgeData
-
- shapeControl2 - Variable in class nxopen.uf.UFCurve.BridgeData
-
- shapeControlFirstCurve() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
Returns the shape control for first curve, specifies how quickly the circular blend curve deviates from the first curve.
- shapeControlMethod() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the shape control method
License requirements: None.
- shapeControlOption() - Method in interface nxopen.features.BridgeCurveBuilder
-
- shapeControlSecondCurve() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
Returns the shape control for second curve, specifies how quickly the circular blend curve deviates from the second curve.
- shapeControlType() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the shape control type
License requirements: None.
- shapeCurve() - Method in interface nxopen.features.BridgeCurveBuilder
-
- ShapeData() - Constructor for class nxopen.die.PadChildBuilder.ShapeData
-
- shapeDetail() - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
Returns the shape detail selection.
- ShapeFrameBuilder - Interface in nxopen.geometricutilities
-
- ShapeFrameBuilder.AnchorAttachmentType - Class in nxopen.geometricutilities
-
Represents the anchor attachment type
- shapeHighlight() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the shape highlight on collsion.
- shapeMatch() - Method in interface nxopen.features.ReplaceBlendBuilder
-
Returns the shape match.
- SHAPEMEMORYALLOY - Static variable in class nxopen.PhysicalMaterial.Type
-
Shape Memory Alloy
- shapeMethod() - Method in interface nxopen.facet.LocalOffsetBuilder
-
Returns the method to define the shape of the transition region
License requirements: None.
- ShapeMetricViewerBuilder - Interface in nxopen.cae
-
- shapeName() - Method in interface nxopen.HumanHandsDialogBuilder
-
Returns the shape name
License requirements: ug_human ("Human Modelling")
.
- shapeOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
- shapeParameter - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyVariable
-
Shape parameter
- ShapePatternClientDialogData() - Constructor for class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- ShapePatternClientDialogData(String, String, int, String[], String[], String[], int, String[], String[], String[], String, String, String, int, boolean) - Constructor for class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- shapePatternCreateDialog(UFModl.ShapePatternClientDialogData) - Method in interface nxopen.uf.UFModlUi
-
- ShapePatternCreateDialogData() - Constructor for class nxopen.uf.UFModlUi.ShapePatternCreateDialogData
-
- shapePatternFreeClientData(UFModl.ShapePatternClientDialogData) - Method in interface nxopen.uf.UFModlUi
-
- shapePatternInitClientData(UFModl.ShapePatternClientDialogData) - Method in interface nxopen.uf.UFModlUi
-
- shapeProperties() - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
Returns the trigger shape option.
- shapeReset() - Method in interface nxopen.features.StudioXformBuilder
-
- shapes() - Method in interface nxopen.diagramming.DiagrammingManager
-
- ShapeSearchBuilder - Interface in nxopen.shapesearch
-
This class provides the methods to execute shape search and get the searched results.
- ShapeSearchBuilder.ExecuteSearchData - Class in nxopen.shapesearch
-
- ShapeSearchBuilder.OpenPartType - Class in nxopen.shapesearch
-
The open part type enum
- ShapeSearchBuilder.SearchByType - Class in nxopen.shapesearch
-
The search type enum
- ShapeSearchBuilder.ShapeSimilarity - Class in nxopen.shapesearch
-
The search shape similarity enum
- ShapeSearchBuilder.ShapeSize - Class in nxopen.shapesearch
-
The search shape size enum
- shapeSearchManager() - Method in interface nxopen.PartCollection
-
The
SearchManager
that manages shape search in this session
Created in NX6.0.0
- ShapeSegmentBuilder - Interface in nxopen.formboard
-
Builder for Face Annotation functionality used in formboard.
- ShapeSegmentBuilder.LineData - Class in nxopen.formboard
-
- shapeSkew() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the shape skew expression for the conic section with face blend
License requirements: None.
- shapeSkewLawControl() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the Shape Skew Law builder
License requirements: None.
- shapeSkewOption() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the shape skew option for the conic section with face blend
License requirements: None.
- shapeType() - Method in interface nxopen.cam.LaserProfileMove
-
Returns the Shape Type
License requirements: None.
- shapeType() - Method in interface nxopen.die.PadChildBuilder
-
Returns the shape type of the die pad.
- shapeType() - Method in interface nxopen.die.PadParentBuilder
-
Returns the shape type of die pads.
- shapeType() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the pierce hole shape type
License requirements: ug_die_design ("Die Design")
.
- shapeValue() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the parameter that determines the shape of the transition area.
- SHARE - Static variable in class nxopen.preferences.SessionModeling.ShareGeometriesOnSaveType
-
- SHARE_FIRST - Static variable in class nxopen.features.StepBuilder.ReferenceBoundaryTypes
-
- sharedBodyInput() - Method in interface nxopen.geometricutilities.PartModuleInputBuilder
-
Returns the bodies for part module shared body
License requirements: None.
- shareGeometriesOption() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option " Share Geometry on Save " gives choice of whether to share geometries among Parasolid solid entities on save or not
License requirements: None.
- sharePath - Variable in class nxopen.uf.UFRoute.AskSegmentsPathsData
-
- SHARP - Static variable in class nxopen.cam.IpwAnalysisBuilder.ColorControl
-
use blend color control
- SHARP - Static variable in class nxopen.facet.LocalOffsetBuilder.ShapeMethodType
-
Sharp specifies a transition region without smoothing.
- SHARP - Static variable in class nxopen.features.LawExtensionBuilderEx.MiterOptions
-
Creates a sharp edge between two faces
- SHARP - Static variable in class nxopen.features.subdivision.SubdivisionBridgeFaceBuilder.ContinuityType
-
Sharp continuity
- SHARP - Static variable in class nxopen.features.subdivision.SubdivisionConnectCageBuilder.ContinuityTypes
-
- SHARP - Static variable in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.ContinuityType
-
Sharp continuity
- SHARP - Static variable in class nxopen.features.subdivision.SubdivisionFillBuilder.ContinuityType
-
Sharp continuity
- SHARP - Static variable in class nxopen.features.subdivision.SubdivisionLoftBuilder.ContinuityType
-
Sharp continuity
- SHARP - Static variable in class nxopen.features.subdivision.SubdivisionRevolveBuilder.ContinuityType
-
Sharp continuity
- SHARP - Static variable in class nxopen.features.subdivision.SubdivisionSetContinuityBuilder.ContinuityTypes
-
- SHARP - Static variable in class nxopen.features.subdivision.SubdivisionSweepBuilder.ContinuityType
-
Sharp continuity
- SHARP - Static variable in class nxopen.features.WrapGeometryBuilder.CloseGapType
-
- SHARP - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorLegendOptions
-
Sharp color display.
- SHARP - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.CloseGapTypes
-
Sharp
- SHARP - Static variable in class nxopen.tooling.WallThicknessCheckerBuilder.LegendControl
-
Sharp
- SHARP_CORNERS - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.CheckScope
-
sharp corners
- SHARP_GRAY_SCALE - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Sharp gray scale.
- sharpEdgeLineFont() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the sharp edge line font.
- shear() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
Returns the shear
License requirements: None.
- SHEAR_CONTACT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- SHEAR_S - Static variable in class nxopen.cae.Result.Component
-
- SHEAR_STRESS_ON_NEGATIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity
-
- SHEAR_STRESS_ON_POSITIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity
-
- SHEAR_T - Static variable in class nxopen.cae.Result.Component
-
- SHEAR_XZ - Static variable in class nxopen.cae.Result.Component
-
- SHEAR_YZ - Static variable in class nxopen.cae.Result.Component
-
- shearAngle() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the shear angle.
- shearCenter() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the shear center
License requirements: None.
- shearLine() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the selected shear line.
- shearModulusFromBulkLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear modulus from bulk modulus and 1st Lame constant.
- shearModulusFromBulkPoisson(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear modulus from bulk modulus and poisson ratio.
- shearModulusFromPoissonLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear modulus from poisson ratio and 1st Lame constant.
- shearModulusFromYoungsBulk(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear modulus from youngs modulus and bulk modulus.
- shearModulusFromYoungsLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear modulus from youngs modulus and 1st Lame constant.
- shearModulusFromYoungsPoisson(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear modulus from youngs modulus and poisson ratio.
- shearStrainAngleMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear strain angle from the strain components
at a space point in the body.
- shearStrainMaximum1(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear strain from the strain components at a
space point in the body.
- shearStrainMaximum2(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear strain from the principal strain at a
space point in the body.
- shearStressAngleMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear stress angle from the stress components at
a space point in the body.
- shearStressMaximum1(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear stress from the stress components at a space
point in the body.
- shearStressMaximum2(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear stress from the principal stress at a space
point in the body.
- SHED_GRID - Static variable in class nxopen.uf.UFDisp.GridContext
-
- shedModeToggle() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the True Shading display toggle state
License requirements: None.
- shedobjs() - Method in interface nxopen.BasePart
-
Returns the Display.TrueShadingCollection instance belonging to this part
Created in NX3.0.0
- Sheet - Interface in nxopen.diagramming
-
Represents the Sheet class.
- SHEET - Static variable in class nxopen.die.FillAreaBuilder.UpperLimitTypes
-
Upper limit is defined by a sheet body.
- SHEET - Static variable in class nxopen.die.MachineReliefBuilder.TrimSheetTypes
-
Trimming surface is a sheet body.
- sheet - Variable in class nxopen.DisplayManager.J3dData
-
true if this is a sheet body
- SHEET - Static variable in class nxopen.drawings.ConvertDraftingContentsBuilder.SelectConversionEntityType
-
- SHEET - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.TemplateTypeEnum
-
- SHEET - Static variable in class nxopen.drawings.ReferenceShowTypes
-
- sheet() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the sheet toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
- sheet() - Method in interface nxopen.drawings.ViewStyleProjectedBuilder
-
Returns the projected view style sheet toggle on the PROJECTED tab of the View Style Dialog
License requirements: None.
- sheet() - Method in interface nxopen.drawings.ViewStyleSectionConstraintsBuilder
-
Returns the sheet toggle on the SECTION CONSTRAINTS tab of the View Style Dialog
License requirements: None.
- SHEET - Static variable in class nxopen.features.GlobalShapingBuilder.BodyMethod
-
Output sheet
- SHEET - Static variable in class nxopen.features.OvercrownBuilder.OutputType
-
- SHEET - Static variable in class nxopen.features.SectionSurfaceBuilderEx.BodyType
-
sheet type
- SHEET - Static variable in class nxopen.features.SewBuilder.Types
-
Sheet
- SHEET - Static variable in class nxopen.features.ThroughCurveMeshBuilder.BodyPreferenceTypes
-
Sheet
- SHEET - Static variable in class nxopen.features.ThroughCurvesBuilder.BodyPreferenceTypes
-
Sheet
- SHEET - Static variable in class nxopen.FileNewTemplateType
-
Specifies a file new sheet template
- SHEET - Static variable in class nxopen.geometricutilities.FeatureOptions.BodyStyle
-
Sheet Body
- Sheet - Interface in nxopen.pid
-
Represents a base class that provides common methods for various model elements in a
CollaborativeDesign
.
- sheet() - Method in interface nxopen.pid.SheetTemplateBuilder
-
Returns the diagramming sheet builder.
- SHEET - Static variable in class nxopen.preferences.SessionModeling.BodyTypeOption
-
Indicates Body Type is solid
- SHEET - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankOption
-
Select a sheet body as blank.
- SHEET - Static variable in class nxopen.uf.UFDieeng.Opts
-
- sheet - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- SHEET_BODIES - Static variable in class nxopen.blockstyler.SelectObject.FilterType
-
Filter to select all sheet bodies
- SHEET_BODIES - Static variable in class nxopen.cam.Preferences.SelectionTypes
-
sheet bodies
- SHEET_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide sheet bodies
- SHEET_BODIES - Static variable in class nxopen.features.GlobalShapingBuilder.DeformBodyType
-
Sheet bodies
- SHEET_BODIES - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type
-
- SHEET_BODY - Static variable in class nxopen.die.CompensateRoughDataBuilder.Types
-
Sheet bodies being compensated.
- SHEET_BODY - Static variable in class nxopen.die.FingerClearanceNotchBuilder.Types
-
Build from either a sheet body or a solid body.
- SHEET_BODY - Static variable in class nxopen.facet.FacetedBody.FacetedbodyType
-
- SHEET_BODY - Static variable in class nxopen.features.shipdesign.DeckBuilder.Types
-
Mold face is being defined by a selected sheet body.
- SHEET_BODY - Static variable in class nxopen.features.shipdesign.GenericPlateSystemBuilder.Types
-
Mold face is being defined by a selected sheet body.
- SHEET_BODY - Static variable in class nxopen.features.shipdesign.HullBuilder.Types
-
Mold face is being defined by a selected sheet body.
- SHEET_BODY - Static variable in class nxopen.features.shipdesign.LongitudinalBulkheadBuilder.Types
-
Mold face is being defined by a selected sheet body.
- SHEET_BODY - Static variable in class nxopen.features.shipdesign.PlateBuilder.BodyTypes
-
Outputs a plate as a sheet body.
- SHEET_BODY - Static variable in class nxopen.features.shipdesign.TransverseBulkheadBuilder.Types
-
Mold face is being defined by a selected sheet body.
- SHEET_BODY - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimSufaceName
-
Select sheet body
- SHEET_BODY - Static variable in class nxopen.tooling.TrimSolidBuilder.Types
-
Region with sheet bodies.
- SHEET_FRAGMENTED - Static variable in class nxopen.uf.UFConstants
-
- SHEET_METAL_BEND_ANGLE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Sheet Metal Bend Angle Property
- SHEET_METAL_BEND_RADIUS_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Sheet Metal Bend Radius Property
- SHEET_METAL_BODY_TYPE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Sheet Metal Body Type Property
- SHEET_METAL_FACE_TYPE_ALL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Sheet Metal All Face Type Property
- SHEET_METAL_FACE_TYPE_BEND_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Sheet Metal Bend Face Type Property
- SHEET_METAL_FACE_TYPE_DEFORM_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Sheet Metal Deform Face Type Property
- SHEET_METAL_FACE_TYPE_WEB_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Sheet Metal Web Face Type Property
- SHEET_METAL_NEUTRAL_FACTOR_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Sheet Metal Neutral Factor Property
- SHEET_METAL_NORMAL - Static variable in class nxopen.die.DrawBeadBuilder.OrientSectionToDrawTypes
-
Orient height parameter to the sheet metal normal at the section location.
- SHEET_MIDPOINT - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.StartEvaluationTypes
-
Use the midpoint of the sheet as the seed point for evaluation.
- SHEET_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide sheet polygon bodies
- SHEET_TEMPLATE - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a drawing sheet template for Insert Sheet dialog
- SHEET_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
-
- SHEET_TRIM - Static variable in class nxopen.tooling.EjectorPostProcessingBuilder.TrimMethod
-
Sheet Trim
- SHEET_ZONE - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.GridSettingsType
-
- SHEETAND_ZONE - Static variable in class nxopen.drawings.ReferenceShowTypes
-
- sheetBodies() - Method in interface nxopen.die.CompensateRoughDataBuilder
-
Returns the sheet bodies that will be approximated.
- sheetBodies() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the sheet bodies toggle on the SECTION tab of the View Style Dialog
License requirements: None.
- sheetBodies() - Method in interface nxopen.features.MakeSolidBuilder
-
Returns the sheet bodies that are closed topologically
License requirements: None.
- sheetBodiesA - Variable in class nxopen.uf.UFSf.MidsrfUserParms
-
- sheetBody() - Method in interface nxopen.features.MidSurfaceFacePair
-
Returns the face pair data
License requirements: solid_modeling ("SOLIDS MODELING")
.
- SHEETBODY - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Sheet Body
- sheetBody() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the sheet body, which is used to trim the die top face.
- sheetBody() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the sheet body, which is used to trim the punch top face.
- sheetBody() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the sheet body used as sheet metal product
License requirements: ug_die_design ("Die Design")
.
- sheetBody() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the sheet body to create trim solid.
- sheetBodyDeck() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the inner deck sheet body, which is used for draw punch inner deck face.
- sheetBodyExportOption() - Method in interface nxopen.STLCreator
-
Returns the Sheet Body Export Option - indicates whether sheet bodies will be joined or faceted as individual sheets
License requirements: None.
- sheetBodyLayer() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the layer of the tire envelope sheet body.
- sheetBodySelection() - Method in interface nxopen.features.MidSurfaceUserDefinedBuilder
-
Returns the sheet bodies to be treated as user defined neutral sheets
License requirements: None.
- sheetBordersAndZones() - Method in interface nxopen.diagramming.DiagrammingManager
-
- SheetBordersAndZones - Interface in nxopen.diagramming
-
- SheetBordersAndZonesBuilder - Interface in nxopen.diagramming
-
- SheetBordersAndZonesBuilder.ArrowDirectionType - Class in nxopen.diagramming
-
Represents the arrow direction type
- SheetBordersAndZonesBuilder.ArrowStyleType - Class in nxopen.diagramming
-
Represents the arrow style type
- SheetBordersAndZonesBuilder.HorizontalCenteringMarkType - Class in nxopen.diagramming
-
Represents the horizontal centering mark type.
- SheetBordersAndZonesBuilder.TrimmingMarkStyleType - Class in nxopen.diagramming
-
Represents the trimming mark style type
- SheetBordersAndZonesBuilder.VerticalCenteringMarkType - Class in nxopen.diagramming
-
Represents the vertical centering mark type.
- SheetBordersAndZonesBuilder.ZoneMethod - Class in nxopen.diagramming
-
Represents the zone method.
- SheetBordersAndZonesBuilder.ZoneOrigin - Class in nxopen.diagramming
-
Represents the zone origin.
- SheetBordersAndZonesCollection - Interface in nxopen.diagramming
-
- sheetBorderSettings() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the sheet border settings builder used to get the values related to borders
License requirements: None.
- SheetBorderSettingsBuilder - Interface in nxopen.diagramming
-
The SheetBorderSettings builder .
- SheetBorderSettingsBuilder - Interface in nxopen.drawings
-
- sheetBorderSettingsStyle() - Method in interface nxopen.drawings.BorderAndZoneStyleBuilder
-
Returns the drawing sheet border settings builder
License requirements: drafting ("DRAFTING")
.
- SheetBuilder - Interface in nxopen.diagramming
-
Represents a SheetBuilder.
- SheetBuilder.SizeData - Class in nxopen.diagramming
-
- SheetCollection - Interface in nxopen.diagramming
-
Represents a collection of Sheet.
- sheetCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- SheetDraftingViewCollection - Interface in nxopen.drawings
-
- sheetDraftingViews() - Method in interface nxopen.drawings.DrawingSheet
-
Returns the SheetDraftingViewCollection instance belonging to this drawing sheet .
- sheetEdges() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Returns the sheet edges of a sheet body
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- sheetEdges() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Returns the sheet edges of a sheet body
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- SheetElement - Interface in nxopen.diagramming
-
Represents the SheetElement class.
- SheetElementBuilder - Interface in nxopen.diagramming
-
Represents a SheetElementBuilder.
- SheetElementBuilder.AllowedTransformationsData - Class in nxopen.diagramming
-
- SheetElementBuilder.ResizeOptionType - Class in nxopen.diagramming
-
- sheetGeometryToSketch() - Method in interface nxopen.ASCImporter
-
Returns the toggle of creating sketch in sheet
License requirements: nx_layout ("NX Layout")
.
- sheetId - Variable in class nxopen.uf.UFModlFeatures.IsodivideFaceData
-
- SheetManager - Interface in nxopen.diagramming
-
A manager to deal with all objects.
- sheetManager() - Method in interface nxopen.Session
-
Returns the SheetManager instance belonging to this session .
- sheetMarginSettings() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the sheet margin settings builder used to get the values related to margins
License requirements: None.
- SheetMarginSettingsBuilder - Interface in nxopen.diagramming
-
The SheetMarginSettings builder .
- SheetMarginSettingsBuilder - Interface in nxopen.drawings
-
Represents the Drawing Sheet Margins Style Builder.
- sheetMarginSettingsStyle() - Method in interface nxopen.drawings.BorderAndZoneStyleBuilder
-
Returns the drawing sheet margin settings builder
License requirements: drafting ("DRAFTING")
.
- sheetMetal() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the sheet that specifies the sheet metal surface
License requirements: None.
- sheetMetal() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the sheet metal of the draw die punch casting.
- sheetMetal() - Method in interface nxopen.die.KeywayBuilder
-
Returns the sheet metal being formed by the casting.
- sheetMetal() - Method in interface nxopen.die.RotorBuilder
-
Returns the sheet metal of the rotor casting.
- sheetMetal() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the sheet metal of the die steelinsert
License requirements: ug_die_design ("Die Design")
.
- sheetMetal() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Returns the sheet metal
License requirements: None.
- SheetmetalBaseBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Sheet Metal Feature Builder to be used in the creation and modification of features.
- SheetmetalBendParameters - Class in nxopen.features.sheetmetal
-
This structure contains the bend parameters for a Sheet Metal bend area.
- SheetmetalBendParameters() - Constructor for class nxopen.features.sheetmetal.SheetmetalBendParameters
-
- SheetmetalBendParameters(double, double, double, SheetmetalBendState) - Constructor for class nxopen.features.sheetmetal.SheetmetalBendParameters
-
Constructor for the SheetmetalBendParameters object.
- SheetmetalBendState - Class in nxopen.features.sheetmetal
-
Bend State
- SheetmetalComponentBuilder - Interface in nxopen.features.sheetmetal
-
Represents a sheet metal component builder to be used in the creation and modification of features componenets.
- sheetMetalDistance() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the sheet metal distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- sheetMetalDistance() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the sheet metal distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- sheetMetalFaceAttribute() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the attribute definition to be applied to the faces of the sheet metal sheet body.
- SheetmetalFaceLayer - Class in nxopen.features.sheetmetal
-
Face Layer
- SheetmetalFaceType - Class in nxopen.features.sheetmetal
-
Face Type
- SheetMetalFeatureRecognitionBuilder - Interface in nxopen.tooling
-
- SheetMetalFromSolid - Interface in nxopen.features
-
Represents a Sheet Metal from Solid feature
To create or edit an instance of this class, use
SheetMetalFromSolidBuilder
Created in NX6.0.0
- SheetMetalFromSolidBuilder - Interface in nxopen.features.sheetmetal
-
- sheetmetalManager() - Method in interface nxopen.features.FeatureCollection
-
Returns the Straight Brake Sheetmetal Manager for this part .
- SheetmetalManager - Interface in nxopen.features.sheetmetal
-
Represents an object that manages sheetmetal features
To obtain an instance of this class, refer to
FeatureCollection
Created in NX4.0.0
- SheetmetalManager.InnerBendFacesData - Class in nxopen.features.sheetmetal
-
- SheetmetalManagerFlangeWidthOption - Class in nxopen.features.sheetmetal
-
Flange width option
- SheetmetalManagerTabSweepDir - Class in nxopen.features.sheetmetal
-
This enum is for Tab sweep direction flag.
- SheetmetalManagerTabType - Class in nxopen.features.sheetmetal
-
This is the enum for Tab type i.e. base tab and secondary tab.
- sheetMetalPartName() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the sheet metal part name.
- sheetMetalSheetAttribute() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the attribute definition to be applied to the sheet metal sheet body.
- sheetMetalThickness() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the project area
License requirements: None.
- sheetMethod() - Method in interface nxopen.tooling.CalculateAreaBuilder
-
Returns the method used to create the projected sheet body.
- sheetName() - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
Returns the drawing sheet name into which the views should be arranged.
- sheetName() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the sheet name option used to edit drafting.
- sheetNumber() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the work instruction sheet number
License requirements: None.
- SheetRevision - Interface in nxopen.pdm
-
Represents a base class that provides common methods for various model elements in a
CollaborativeDesign
.
- sheets() - Method in interface nxopen.diagramming.DiagrammingManager
-
- SHEETS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Sheet Report Filter
- sheetScale() - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
Returns the sheet scale
License requirements: None.
- sheetScale() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the scale of the sheet.
- SheetSectionLineCollection - Interface in nxopen.drawings
-
- sheetSectionLines() - Method in interface nxopen.drawings.DrawingSheet
-
Returns the SheetSectionLineCollection instance belonging to this drawing sheet .
- sheetSelection() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the user defined sheet selection
License requirements: None.
- sheetsSelection() - Method in interface nxopen.tooling.MWCopySheetsBuilder
-
Returns the sheets selection for selecting the parting and/or patched sheets to be copied
License requirements: None.
- sheetTag - Variable in class nxopen.uf.UFModl.AskThickenSheetParmsData
-
- SheetTemplateBuilder - Interface in nxopen.pid
-
- SheetTemplateManager - Interface in nxopen.drawings
-
- sheetTemplates() - Method in interface nxopen.drawings.DrawingSheetCollection
-
Returns the Sheet Template Manager for part .
- sheetThickness() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the thickness of sheet metal model.
- sheetTitle() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the user defined Sheet Title
License requirements: None.
- sheetToDeform() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the sheet to deform
License requirements: None.
- SHEETZONE - Static variable in class nxopen.preferences.SessionDrafting.GridObjectType
-
Sheet Zone Grid
- SheetZoneReferenceBuilder - Interface in nxopen.drawings
-
- sheetZoneSettings() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the sheet zone settings builder used to get the values related to zones
License requirements: None.
- SheetZoneSettingsBuilder - Interface in nxopen.diagramming
-
The SheetZoneSettings builder .
- SheetZoneSettingsBuilder - Interface in nxopen.drawings
-
Represents the Drawing Sheet Zone Setting Style Builder.
- sheetZoneSettingsStyle() - Method in interface nxopen.drawings.BorderAndZoneStyleBuilder
-
Returns the drawing sheet zone settings builder
License requirements: drafting ("DRAFTING")
.
- Shelf - Interface in nxopen.features
-
Represents a shelf feature
To create or edit an instance of this class, use
ShelfBuilder
Created in NX10.0.0
- SHELF_FROM_END - Static variable in class nxopen.features.ShelfBuilder.LengthMethods
-
- ShelfBuilder - Interface in nxopen.features
-
- ShelfBuilder.DepthMethods - Class in nxopen.features
-
Depth Method for Depth Face
- ShelfBuilder.LengthMethods - Class in nxopen.features
-
Depth Method for Length
- ShelfBuilder.ReferenceType - Class in nxopen.features
-
Type of Reference Object
- ShelfBuilder.StepMethod - Class in nxopen.features
-
Step Method for Side Face
- ShelfBuilder.Types - Class in nxopen.features
-
Type of shelf.
- shelfEdge() - Method in interface nxopen.features.ShelfBuilder
-
Returns the shelf edge
License requirements: None.
- shelfEnd() - Method in interface nxopen.features.ShelfBuilder
-
Returns the shelf end
License requirements: None.
- shelfLength() - Method in interface nxopen.features.PatchOpeningsBuilder
-
- shelfPoint1() - Method in interface nxopen.features.PatchOpeningsBuilder
-
- shelfPoint2() - Method in interface nxopen.features.PatchOpeningsBuilder
-
- shelfRadius() - Method in interface nxopen.features.PatchOpeningsBuilder
-
- shelfType() - Method in interface nxopen.features.ShelfBuilder
-
Returns the type
License requirements: None.
- SHELL - Static variable in class nxopen.cae.ElementCreateBuilder.ElemDimType
-
shell
- SHELL - Static variable in class nxopen.cae.ElementExtrudeBuilder.ElemDimType
-
shell
- SHELL - Static variable in class nxopen.cae.ElementProjectBuilder.ElementDimensionType
-
shell element
- SHELL - Static variable in class nxopen.cae.ElementReflectBuilder.ElemDimType
-
only shell
- SHELL - Static variable in class nxopen.cae.ElementRevolveBuilder.ElemDimType
-
shell
- SHELL - Static variable in class nxopen.cae.ElementRotateBuilder.ElemDimensionType
-
only shell elements can be selected
- SHELL - Static variable in class nxopen.cae.ElementTranslateBuilder.ElemDimensionType
-
only shell elements can be selected
- SHELL - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
shell
- SHELL - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
-
2-d
- SHELL - Static variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType
-
the material orientation of shell element
- SHELL - Static variable in class nxopen.cae.ReassignElementsBuilder.ElementDimensionOption
-
2-d
- Shell - Interface in nxopen.features
-
Represents a Shell feature.
- SHELL - Static variable in class nxopen.preferences.PartVisualizationEmphasis.SeeThruStyleType
-
Displays de-emphasized shaded geometry as a translucent
shell with a single color.
- Shell2SolidBuilder - Interface in nxopen.cae
-
- SHELL_ELEMENT - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 2D element
- SHELL_PLATING - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.MountingType
-
- SHELL_PROPERTY - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
-
Shell property variables
- SHELL_RESULTANT - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- SHELL_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
-
- SHELL_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- SHELL_STRAIN_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
-
- SHELL_STRAIN_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- SHELL_STRESS - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SolverInputType
-
Use the solver shell stress resultants
- SHELL_STRESS_RESULTANT - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- SHELL_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
-
- ShellBuilder - Interface in nxopen.features
-
Represents the Shell feature builder.
- shellDataLocation() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
- ShellEADBuilder - Interface in nxopen.cae
-
- ShellEADBuilder.CoordinateSystemDataType - Class in nxopen.cae
-
indicates which type of coordinate system data to use
- ShellEADBuilder.MaterialOrientationMethod - Class in nxopen.cae
-
indicates which material orientation method to use
- ShellEADBuilder.State - Class in nxopen.cae
-
indicates to ignore, apply or clear the state property upon commit
- ShellElementEvaluationLocation - Class in nxopen.cae.responsesimulation
-
Specifies shell element evaluation locations
- shellElementFace() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
Returns the shell element face location type of strain gage
License requirements: nx_response_anlys ("NX Response Analysis")
.
- shellEvaluationLocation() - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
Returns the evaluation location of shell element.
- ShellExpansion - Interface in nxopen.features.shipdesign
-
Represents a shell expansion feature
To create or edit an instance of this class, use
ShellExpansionBuilder
Created in NX7.5.0
- ShellExpansionBuilder - Interface in nxopen.features.shipdesign
-
- ShellFace - Interface in nxopen.features
-
Represents a shell face feature
To create or edit an instance of this class, use
ShellFaceBuilder
Created in NX6.0.0
- ShellFaceBuilder - Interface in nxopen.features
-
- shellLayer() - Method in interface nxopen.cae.optimization.TBSLoadCase
-
Returns the shell layer
License requirements: None.
- shellLocation() - Method in interface nxopen.cae.responsesimulation.DataLocation
-
Returns the start value of frequency range.
- ShellOptions() - Constructor for class nxopen.preferences.PartVisualizationEmphasis.ShellOptions
-
- ShellOptions(NXColor.Rgb, PartVisualizationEmphasis.EdgesType, NXColor.Rgb, int) - Constructor for class nxopen.preferences.PartVisualizationEmphasis.ShellOptions
-
Constructor for the ShellOptions object.
- shellRegion() - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
Returns the shell region.
- shellResultantFx() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the shell stress resultant Fx component
License requirements: None.
- shellResultantFxy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the shell stress resultant Fxy component
License requirements: None.
- shellResultantFy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the shell stress resultant Fy component
License requirements: None.
- shellResultantMx() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the shell stress resultant Mx component
License requirements: None.
- shellResultantMxy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the shell stress resultant Mxy component
License requirements: None.
- shellResultantMy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the shell stress resultant My component
License requirements: None.
- shellResultantQx() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the shell stress resultant Qx component
License requirements: None.
- shellResultantQy() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the shell stress resultant Qy component
License requirements: None.
- SHELLS - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.NodeElementOptionEnum
-
Shells
- SHELLS - Static variable in class nxopen.cae.responsesimulation.NodalAveragingOption
-
- shellSect() - Method in interface nxopen.cae.ResultVariable
-
Returns the shell section
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- shellsection - Variable in class nxopen.cae.Result.ResultSection
-
- shellStress() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the shell stress resultants
License requirements: None.
- shellStressRule() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the shell stress resultant envelope rule
License requirements: None.
- ShellTemplate - Interface in nxopen.features.shipdesign
-
Represents a shell template feature.
- ShellTemplateBuilder - Interface in nxopen.features.shipdesign
-
- ShellTemplateBuilder.CornerCutTypes - Class in nxopen.features.shipdesign
-
The option for creating corner cuts on the templates.
- ShellTemplateBuilder.MarkingTypes - Class in nxopen.features.shipdesign
-
The option for controlling which marking lines are drawn on the plate
- ShellTemplateBuilder.PlaneLocationTypes - Class in nxopen.features.shipdesign
-
The option for how the plane locations will be specified as input.
- ShellTemplateBuilder.SightLineCutTypes - Class in nxopen.features.shipdesign
-
The option for creating sight line cuts on the templates.
- ShellTemplateBuilder.Types - Class in nxopen.features.shipdesign
-
The option for controlling how the coordinate system for template creation is specified.
- ShellTo3dHybridBuilder - Interface in nxopen.cae
-
- SHIELD - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Shield connection.
- SHIELD - Static variable in class nxopen.routing.RouteManager.FindObjectType
-
- ShieldDefinition - Interface in nxopen.routing.electrical
-
Represents Routing Electrical ShieldDefinition object
Creator not available in KF.
- ShieldDevice - Interface in nxopen.routing.electrical
-
- ShieldStockDefinition - Interface in nxopen.routing.electrical
-
Represents Routing Electrical ShieldStockDefinition object
Creator not available in KF.
- shift() - Method in interface nxopen.cam.Cycle
-
Returns the shift
License requirements: None.
- shift() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the expression containing the amount to shift the pendulum from the contact point on the car.
- SHIFT_JIS - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Japanese character set
- shiftDown(HoleCalloutSettingsBuilder.Featuretype, int) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
If the position of the nth hole feature parameter of feature type can be shifted down, shifts it down by one.
- SHIFTED_BASE_DATA - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- SHIFTED_FROM_ROTATED - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- SHIFTED_VEHICLE - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- shiftStatus() - Method in interface nxopen.cam.Cycle
-
Returns the shift status
License requirements: None.
- shiftUp(HoleCalloutSettingsBuilder.Featuretype, int) - Method in interface nxopen.annotations.HoleCalloutSettingsBuilder
-
If the position of the nth hole feature parameter of feature type can be shifted up, shifts it up by one.
- ShimBuilder - Interface in nxopen.tooling
-
Shim Builder of PDW and EDW.
- ShimBuilder.ParentOption - Class in nxopen.tooling
-
Specify the parent node.
- ShimBuilder.SideAttributeValues - Class in nxopen.tooling
-
Specifies the value of side attribute.
- ShimBuilder.Types - Class in nxopen.tooling
-
Specify the shim operation type.
- shimFace() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the face for doing shim body
License requirements: None.
- shimHeight() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the shim height
License requirements: None.
- ShimInnerProfileSetBuilder - Interface in nxopen.tooling
-
This is a seed block of set list.
- ShimInnerProfileSetBuilderList - Interface in nxopen.tooling
-
Represents a list of objects.
- shimOffset() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the shim offset
License requirements: None.
- shininess() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the shininess tolerance.
- shininess() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the shininess tolerance.
- shininess - Variable in class nxopen.uf.UFView.Lighting
-
- shininessData() - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Returns the shininess value.
- shininessScale() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
Returns the shininess scale data on the SHADING tab of the View Style Dialog
License requirements: None.
- SHINY_METAL_COLORWASH - Static variable in class nxopen.display.TrueStudioBuilder.GlobalMaterial
-
Uses the object's color with shiny metal material characteristics.
- SHIP - Static variable in class nxopen.weld.WeldJointBuilder.CoordinateSystem
-
Desired points and vectors should be in ship coordinate system.
- SHIP_BASIC_DESIGN - Static variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.AppTypes
-
The ship basic design.
- SHIP_BRACKET - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_COLLAR_PLATE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_CONTAINER - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an NX Ship Container file new template
- SHIP_DECK - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_DETAIL - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an NX Ship Detail file new template
- SHIP_DETAIL_DESIGN - Static variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.AppTypes
-
The ship detail design.
- SHIP_EDGE_REINFORCEMENT - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_GA_ASSEMBLY - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an NX Ship GA Assembly file new template
- SHIP_GA_SYSTEM - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an NX Ship GA System file new template
- SHIP_GENERIC_PLATE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_GRID_AND_SELECTED - Static variable in class nxopen.display.PlanarShipGridBuilder.IntersectOption
-
intersect the ship grid and selected objects with the plane
- SHIP_HULL - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_LONGITUDINAL_BULKHEAD - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_ORIENTATION - Static variable in class nxopen.features.shipdesign.FeatureParmsBuilder.OrientationAngleRuleTypes
-
Angles are measured based on location and orientation in the ship.
- SHIP_ORIENTATION - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.AngleRuleTypes
-
Angle direction and reference position is determined by the location in the ship.
- SHIP_PROFILE_CUT_OUT - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_REFERENCE - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an NX Ship Reference file new template
- SHIP_RULE - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
This is used for ship design to trigger design.
- SHIP_SEAM - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_STANDARD_PART - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_STIFFENER - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SHIP_STRUCTURE - Static variable in class nxopen.features.shipdesign.MaterialEstimationBuilder.SelectionMethods
-
Selection by ship structure.
- SHIP_STRUCTURE - Static variable in class nxopen.features.shipdesign.PillarSystemBuilder.Types
-
- SHIP_SYSTEM - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an NX Ship System file new template
- SHIP_TRANSVERSE_BULKHEAD - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- ShipAttributeHolder - Interface in nxopen.features.shipdesign
-
- shipBodies() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the ship bodies
License requirements: None.
- shipBody() - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder
-
Returns the ship body.
- shipBody() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the ship body.
- shipBody() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the ship body
License requirements: None.
- shipbuildingLines() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Ship Lines.
- shipbuildingLines() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to Shipbuilding Lines .
- ShipbuildingLinesViewPreferences - Interface in nxopen.preferences
-
Represents set of Shipbuilding Lines View Preferences applicable to drafting views.
- ShipbuildingLinesViewPreferences.Lines - Class in nxopen.preferences
-
Line type
- ShipbuildingLinesViewPreferences.ShipbuildingLines - Class in nxopen.preferences
-
Geometry type
- ShipbuildingLinesViewStyle - Interface in nxopen.drawings
-
Represents set of Shipbuilding Lines View Style applicable to drafting views.
- ShipbuildingLinesViewStyle.Lines - Class in nxopen.drawings
-
Line type
- ShipbuildingLinesViewStyle.ShipbuildingLines - Class in nxopen.drawings
-
Geometry type
- shipCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the ShipCollection instance belonging to this part .
- ShipCollection - Interface in nxopen.features
-
This class contains the factory method for creating ship feature builder.
- ShipCollection.SteelFeatureApproach - Class in nxopen.features
-
Represents steel feature different approaches.
- shipComponent() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the components on which the welding joints will be created.
- shipComponents() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Returns the components containing basic design data to prepare for meshing.
- ShipContainerBuilder - Interface in nxopen.features.shipdesign
-
This class is used to specify the "container" part for the Ship Structures application, i.e., that
part that should have newly created Ship Stiffeners, Plates, Standard Parts added to it as assembly
components.
- ShipCoordinates - Interface in nxopen.features.shipdesign
-
Represents a ship coordinates feature
Ship Coordinates is not supported in KF.
- ShipCoordinatesBuilder - Interface in nxopen.features.shipdesign
-
- ShipCoordinatesBuilder.Selection - Class in nxopen.features.shipdesign
-
Represents the options to select point or component.
- ShipCoordinatesBuilder.XDirectionType - Class in nxopen.features.shipdesign
-
Represents X-frame direction.
- ShipCoordinatesBuilder.YDirectionType - Class in nxopen.features.shipdesign
-
Represents Y-frame direction.
- ShipCoordinatesBuilder.ZDirectionType - Class in nxopen.features.shipdesign
-
Represents Z-frame direction.
- shipCustomerEnterApplication() - Method in interface nxopen.shipdesign.Generator.ShipCustomerEnterApplication
-
Defines the callback function whenever an NX application is entered.
- shipCustomerExitApplication() - Method in interface nxopen.shipdesign.Generator.ShipCustomerExitApplication
-
Defines the callback function whenever an NX application is exited.
- ShipCutout - Interface in nxopen.features.shipdesign
-
Represents a ship cutout feature
To create or edit an instance of this class, use
ShipCutoutBuilder
Created in NX7.5.0
- ShipCutoutBuilder - Interface in nxopen.features.shipdesign
-
- ShipCutoutBuilder.CreationMethod - Class in nxopen.features.shipdesign
-
available methods used to place a cutout object
- ShipDesignPreferencesBuilder - Interface in nxopen.features.shipdesign
-
- ShipDesignPreferencesBuilder.AngleRuleTypes - Class in nxopen.features.shipdesign
-
The methods that can be used to measure angles in ship design.
- ShipDesignPreferencesBuilder.ColorType - Class in nxopen.features.shipdesign
-
the color option type
- ShipDesignPreferencesBuilder.Types - Class in nxopen.features.shipdesign
-
This enum represents the ship structure types.
- ShipDesignVersionUpBuilder - Interface in nxopen.features.shipdesign
-
- ShipDimensionBuilder - Interface in nxopen.annotations
-
- ShipDimensionBuilder.GroupType - Class in nxopen.annotations
-
The enum represents group type from concept model
- ShipDimensionCollection - Interface in nxopen.annotations
-
Represents a collection of
Dimension
objects
To obtain an instance of this class, refer to
Part
Created in NX9.0.0
- shipDimensions() - Method in interface nxopen.Part
-
Returns the ShipDimensionCollection instance belonging to this part .
- ShipDraftingFramebarGeneralBuilder - Interface in nxopen.annotations
-
- ShipDraftingFramebarGeneralBuilder.TicDirectionTypes - Class in nxopen.annotations
-
Tic Direction Options
- shipDraftingViewLines() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Ship Drafting View Lines.
- shipDraftingViewLines() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to Ship Drafting View Lines .
- ShipDraftingViewLinesBuilder - Interface in nxopen.drawings
-
- ShipDraftingViewLinesBuilderList - Interface in nxopen.drawings
-
Represents a list of objects.
- ShipDraftingViewLinesViewPreferences - Interface in nxopen.preferences
-
Represents set of Ship Drafting View Lines View Preferences applicable to drafting views.
- ShipDraftingViewLinesViewPreferences.Lines - Class in nxopen.preferences
-
Line type
- ShipDraftingViewLinesViewStyle - Interface in nxopen.drawings
-
Represents set of Ship Drafting Lines View Style applicable to drafting views.
- ShipDraftingViewLinesViewStyle.Lines - Class in nxopen.drawings
-
Line type
- ShipEndCut - Interface in nxopen.features.shipdesign
-
Represents a ship end cut feature
To create or edit an instance of this class, use
ShipEndCutBuilder
Created in NX7.5.0
- ShipEndCutBuilder - Interface in nxopen.features.shipdesign
-
- ShipEndCutBuilder.CreationMethod - Class in nxopen.features.shipdesign
-
available methods used to place a cutout object
- ShipFeatureConverter - Interface in nxopen.features.shipdesign
-
This class is used to convert/upgrade legacy Ship Design features.
- ShipFeatureConverter.PartScope - Class in nxopen.features.shipdesign
-
Settings for the conversion scope
- ShipFlatPattern - Interface in nxopen.features.shipdesign
-
- ShipFlatPatternBuilder - Interface in nxopen.features.shipdesign
-
- ShipIntersections - Interface in nxopen.features.shipdesign
-
Represents a ship intersection feature
To create or edit an instance of this class, use
ShipIntersectionsBuilder
Created in NX7.5.0
- ShipIntersectionsBuilder - Interface in nxopen.features.shipdesign
-
- ShipIntersectionsBuilder.CreationType - Class in nxopen.features.shipdesign
-
Define the creation type
- ShipIntersectionsBuilder.Type - Class in nxopen.features.shipdesign
-
Define the output option for each of the frame type
- shipLibType() - Method in interface nxopen.features.shipdesign.UpdateShipLibraryBuilder
-
Returns the ship lib type
License requirements: None.
- ShipMeshAutomation - Interface in nxopen.cae
-
Represents Ship Mesh Automation
This is an abstract class
.
- ShipMeshAutomationBuilder - Interface in nxopen.cae
-
- ShipMeshAutomationBuilder.MeshingMethodType - Class in nxopen.cae
-
the meshing method type
- ShipNameFieldBuilder - Interface in nxopen.features.shipdesign
-
A field, combined with other fields, to generate a name for a Ship Basic Design Object such as a Deck.
- ShipnameFieldBuilderType - Class in nxopen.features.shipdesign
-
Field Type
- shipNames() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the ship name.
- shipNames() - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
Returns the ship name.
- shipNames() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
Returns the Ship Names builder, used to assign names to the copied objects created.
- shipNames() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Returns the Ship Names builder, used to assign names to the copied objects created.
- shipNames() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the Ship Names builder, used to assign names to the Edge Reinforcement Systems created.
- shipNames() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns The ship name builder.
- shipNames() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the Ship Names builder, used to assign names to the Pillar Systems created.
- shipNames() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns The ship name builder.
- shipNames() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the Ship Names builder, used to assign names to the Plate Systems created.
- shipNames() - Method in interface nxopen.features.shipdesign.RoomBuilder
-
Returns the ship name.
- shipNames() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the Ship Names builder, used to assign names to the Seams created.
- shipNames() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the Ship Names builder, used to assign names to the Standard Parts created.
- shipNames() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns The ship name builder.
- shipNames() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the Ship Names builder, used to assign names to the Stiffener Systems created.
- ShipNamesBuilder - Interface in nxopen.features.shipdesign
-
This class provides the mechanism for defining the names of Basic Design objects
such as Decks, Bulkheads, Stiffener Systems, etc.
- ShipNamesBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- ShipnamesBuilderType - Class in nxopen.features.shipdesign
-
The type of Ship Object for which automatically generated names will be created
- ShipnamesBuilderVersion - Class in nxopen.features.shipdesign
-
The version of Ship Object naming rule
- shipNamesList() - Method in interface nxopen.features.shipdesign.ShipNamesListBuilder
-
Returns the list of ShipNamesBuilder objects
License requirements: None.
- ShipNamesListBuilder - Interface in nxopen.features.shipdesign
-
- ShipNavigatorNodeBuilder - Interface in nxopen.shipdesign
-
Represents the ship navigator node builder to add or edit ship navigator node.
- ShipNavigatorNodeBuilder.NodeTypes - Class in nxopen.shipdesign
-
Settings to indicate the type of ship navigator node.
- ShipNavigatorRoot - Interface in nxopen.shipdesign
-
Represents the interface for ship navigator root classes.
- shipNo() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the ship no.
- shipObjectType() - Method in interface nxopen.features.shipdesign.ShipNamesBuilder
-
Returns
the Ship object type (Hull, Deck, etc.) for which names will be generated.
- SHIPPED - Static variable in class nxopen.options.LevelType
-
Shipped level
- SHIPPED - Static variable in class nxopen.preferences.LoadDraftingStandardBuilder.LoadLevel
-
the shipped level
- ShipPreparationBuilder - Interface in nxopen.features.shipdesign
-
Creates a builder used to prepare basic design data for meshing.
- ShipPreparationBuilder.FindShipComponentsData - Class in nxopen.features.shipdesign
-
- ShipPreparationInfo - Interface in nxopen.features.shipdesign
-
- ShipPreparationInfo.Types - Class in nxopen.features.shipdesign
-
Used to specify the type of object represented in the data.
- ShipProfileCutout - Interface in nxopen.features.shipdesign
-
Represents a profile cutout feature for NX75 using sketch expression modifier block.
- ShipProfileCutoutBuilder - Interface in nxopen.features.shipdesign
-
Represents a
ProfileCutout
builder for editing legacy(NX75) profile cutout feature.
- ShipSection - Interface in nxopen.features.shipdesign
-
Represents a ship section feature
To create or edit an instance of this class, use
ShipSectionBuilder
Created in NX7.5.0
- ShipSectionBuilder - Interface in nxopen.features.shipdesign
-
- ShipSectionBuilder.Type - Class in nxopen.features.shipdesign
-
Define the creation type
- ShipSectionBuilder.XFilter - Class in nxopen.features.shipdesign
-
Define the output option for each of the frame type
- ShipSectionBuilder.ZFilter - Class in nxopen.features.shipdesign
-
Define the output option for each of the frame type
- shipSession() - Method in interface nxopen.Session
-
- ShipSession - Interface in nxopen.shipdesign
-
Represents Ship session
To obtain an instance of this class, refer to
Session
Created in NX11.0.0
- shipStructure() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- shipStructure() - Method in interface nxopen.features.shipdesign.DisplaySolidBuilder
-
Returns the ship structure whose solid display is desired.
- shipStructure() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the ship structures to change the stock information
License requirements: None.
- shipStructure() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the ship structure upon which seams will be created.
- shipStructure() - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
Returns the ship structures
License requirements: None.
- shipStructure() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
- shipStructure() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the ship structure upon which to create the stiffener system.
- ShipStructureBuilder - Interface in nxopen.features.shipdesign
-
- shipStructureEdge() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- shipStructures() - Method in interface nxopen.features.shipdesign.MaterialEstimationBuilder
-
Returns the selected ship structures.
- shipStructureType() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the ship structure type.
- ShipTrimBody - Interface in nxopen.features.shipdesign
-
Represents a ship trim body feature
To create or edit an instance of this class, use
ShipTrimBodyBuilder
Created in NX9.0.1
- ShipTrimBodyBuilder - Interface in nxopen.features.shipdesign
-
- shipType() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the ship type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- SHM - Static variable in class nxopen.mechatronics.McdSignalServerConfigurationtype
-
- SHM - Static variable in class nxopen.mechatronics.SignalMappingBuilder.AppOption
-
- shmClient() - Method in interface nxopen.mechatronics.ExternalSignalConfigurationBuilder
-
Returns the SHM builder that holds the configuration for SHM clients.
- SHMConfigurationBuilder - Interface in nxopen.mechatronics
-
- SHMInfo() - Constructor for class nxopen.mechatronics.SHMSignalClientBuilder.SHMInfo
-
- SHMInfo(String, SHMSignalClientBuilder.EndianType, String) - Constructor for class nxopen.mechatronics.SHMSignalClientBuilder.SHMInfo
-
Constructor for the SHMInfo object.
- SHMInstanceData() - Constructor for class nxopen.mechatronics.SHMSignalClientBuilder.SHMInstanceData
-
- shmMutex() - Method in interface nxopen.mechatronics.SHMSignalProviderBuilder
-
Returns Ge the SHM Mutex.
- shmname() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
Returns the SHM name.
- shmName() - Method in interface nxopen.mechatronics.SHMSignalProviderBuilder
-
Returns Get the SHM Name.
- SHMSignal() - Constructor for class nxopen.mechatronics.SHMSignalClientBuilder.SHMSignal
-
- SHMSignal(String, SignalBuilder.DataType, String, SignalBuilder.ExternalSignalIOType) - Constructor for class nxopen.mechatronics.SHMSignalClientBuilder.SHMSignal
-
Constructor for the SHMSignal object.
- shmsignalAccess() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
Returns the SHM access previlege type.
- SHMSignalClientBuilder - Interface in nxopen.mechatronics
-
- SHMSignalClientBuilder.EndianType - Class in nxopen.mechatronics
-
Represents endian type
- SHMSignalClientBuilder.SHMInfo - Class in nxopen.mechatronics
-
Represents SHMInstance info definition structure.
- SHMSignalClientBuilder.SHMInstanceData - Class in nxopen.mechatronics
-
- SHMSignalClientBuilder.SHMSignal - Class in nxopen.mechatronics
-
Represents SHMTag info definition structure.
- SHMSignalConnection - Interface in nxopen.mechatronics
-
Represents the SHM Signal connection class.
- SHMSignalConnectionBuilder - Interface in nxopen.mechatronics
-
- SHMSignalConnectionBuilder.DataType - Class in nxopen.mechatronics
-
Represents the data type.
- SHMSignalConnectionBuilder.EndianType - Class in nxopen.mechatronics
-
Represents the endian type.
- SHMSignalConnectionBuilder.SHMSignalAccessType - Class in nxopen.mechatronics
-
Represents the SHM Signal access type.
- SHMSignalConnectionBuilder.StreamIOType - Class in nxopen.mechatronics
-
Represents the mapping data sream direction.
- SHMSignalConnectionBuilderList - Interface in nxopen.mechatronics
-
Represents a list of objects.
- SHMSignalConnectionCollection - Interface in nxopen.mechatronics
-
Represents a collection of SHM Signal Connection.
- shmsignalConnectionList() - Method in interface nxopen.mechatronics.SHMConfigurationBuilder
-
Returns the SHM Signal Connection Builder list
License requirements: None.
- shmsignalConnectionList() - Method in interface nxopen.mechatronics.SignalMappingBuilder
-
Returns the SHM Signal Connection Builder list
License requirements: None.
- shmsignalConnections() - Method in interface nxopen.mechatronics.PhysicsManager
-
- shmsignalName() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
Returns the SHM signal name.
- shmsignalProvider() - Method in interface nxopen.mechatronics.MCDSignalServerConfigurationBuilder
-
Returns the SHMSignalProviderBuilder that holds the configuration for SHMSignalProvider.
- SHMSignalProviderBuilder - Interface in nxopen.mechatronics
-
- SHMSignalProviderBuilder.SignalInfo - Class in nxopen.mechatronics
-
Represents SHMProviderSignal info definition structure.
- shmsignalType() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
Returns the SHM signal type.
- SHOCK_RESPONSE_SPECTRUM - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Shock Response Spectrum
- SHOCK_RESPONSE_SPECTRUM - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Shock Response Spectrum
- SHOCK_RESPONSE_SPECTRUM - Static variable in class nxopen.cae.XyFunctionLoadType
-
Function is Shock Response Spectrum
- SHOCK_RESPONSE_SPECTRUM - Static variable in class nxopen.cae.XyFunctionResponseType
-
Function is Shock Response Spectrum
- shockDriverJointSteps() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the step number of the shock driver joint of the Five Link Solid Axle without steering suspension template.
- shopdoc() - Method in interface nxopen.UFSession
-
- SHORT - Static variable in class nxopen.features.FaceBlendBuilder.TrimmingMethod
-
Trim short
- SHORT - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Short
- SHORT_BIT - Static variable in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshDataType
-
32 bit IEEE format
- SHORT_LONG_ARMWITH_STEERING - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType
-
Use the Short-Long Arm with steering suspension template.
- SHORT_LONG_ARMWITHOUT_STEERING - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType
-
Use the Short-Long Arm without steering suspension template.
- SHORT_NAME - Static variable in class nxopen.Step203Creator.EntityNameOption
-
Deprecated.
create short names
- SHORT_NAME - Static variable in class nxopen.Step214Creator.EntityNameOption
-
Deprecated.
create short names
- SHORT_NAME - Static variable in class nxopen.StepCreator.EntityNameOption
-
create short names
- shortDescription() - Method in interface nxopen.routing.DesignRuleViolation
-
Returns the short description of the design rule violation is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- SHORTEN_ARC_OR_CHAMFER - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.ValueType
-
- SHORTEST - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableDirections
-
Rotate table in shortest direction
- SHORTEST3D_DISTANCE - Static variable in class nxopen.features.TrimCurveBuilder.InteresectionDirectionOptions
-
Shortest 3d distance
- SHORTEST3DDISTANCE - Static variable in class nxopen.features.TrimCurve2Builder.Direction
-
- SHORTEST_DIAGONAL - Static variable in class nxopen.cae.ElementSplitBuilder.SplitMethodType
-
Shortest Dialgonal
- SHORTEST_DISTANCE_CLEARANCE - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
shortest distance from/to clearance
- SHORTEST_DISTANCE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalTypes
-
shortest distance to clearance
- SHORTEST_DISTANCE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes
-
shortest distance to clearance
- SHORTEST_LENGTH - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.AutoRouteSel
-
- SHORTEST_PATH - Static variable in class nxopen.cam.fbm.FeatureGeometry.SortOrder
-
Sort order: Shortest Path
- SHORTEST_PATH - Static variable in class nxopen.cam.HoleBossGeom.OptimizationTypes
-
Optimization: Shortest Path
- SHORTEST_PATH - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PathOrderTypes
-
Path order optimization will use the shortest path method
- SHORTEST_PATH - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PointOrderTypes
-
Point order optimization will use the shortest path method
- SHORTEST_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
-
shortest to clearance
- SHORTEST_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
shortest to clearance
- SHORTEST_TO_CLEARANCE - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
-
shortest to clearance
- SHORTEST_TO_CLEARANCE - Static variable in class nxopen.cam.NcmTransferBuilder.TraverseTypes
-
traverse shortest to clearance
- SHOTEST_DISTANCE - Static variable in class nxopen.cae.NodeProjectBuilder.ProjectionMethodType
-
along shortest distance
- shouldCopySketchBase() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- shouldCopySketchColumn() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- SHOULDER - Static variable in class nxopen.cam.HoleMakingBuilder.ControlPointTypes
-
shoulder
- shoulder() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- SHOULDER - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ConicType
-
Shoulder mode
- SHOULDER - Static variable in class nxopen.HumanData.InverseKinematicsInitJoint
-
Indicate starting at the shoulder for simple arm motions
without changing the upper body position.
- SHOULDER - Static variable in class nxopen.tooling.EjectorTableBuilder.EjectorType
-
shoulder ejectors
- SHOULDER_DEPTH - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
-
obsolete Shoulder Depth
- SHOULDER_ELBOW_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of shoulder_elbow_length
- SHOULDER_ONLY - Static variable in class nxopen.HumanReachZone.MethodType
-
- shoulderCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the shoulder curve.
- shoulderToHipLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the shoulder to hip length.
- show(View) - Method in interface nxopen.assemblies.Explosion
-
Changes the view so that it shows the explosion.
- show() - Method in interface nxopen.blockstyler.BlockDialog
-
- show(BlockDialog.DialogMode) - Method in interface nxopen.blockstyler.BlockDialog
-
- show() - Method in interface nxopen.blockstyler.UIBlock
-
Returns the Visibility of block.
- SHOW - Static variable in class nxopen.cae.Post.GroupVisibility
-
- show - Variable in class nxopen.cae.Post.Headerlines
-
- show(boolean) - Method in interface nxopen.cae.PostAnnotation
-
Show/Hide annotation object on graphics screen.
- SHOW - Static variable in class nxopen.cae.PostShowhideBuilder.Vis
-
- SHOW - Static variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.Operation
-
Display information on nodes that are off the CAD geometry by more than the input tolerance
- show() - Method in interface nxopen.display.GridBuilder
-
Returns the show
License requirements: None.
- show() - Method in interface nxopen.display.SectionCurveSettingsBuilder
-
Returns the curve on off flag.
- SHOW - Static variable in class nxopen.features.shipdesign.FeaturesBatchOperationBuilder.Types
-
- SHOW - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TblPointTypeEnum
-
- show(String, NXMessageBox.DialogType, String) - Method in interface nxopen.NXMessageBox
-
Show message box.
- show(String, NXMessageBox.DialogType, String[]) - Method in interface nxopen.NXMessageBox
-
Show message box.
- show() - Method in interface nxopen.uistyler.Dialog
-
Displays an NX (UIStyler generated) "bottom" dialog.
- show2dWorkpiece(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Show 2D workpiece
License requirements: cam_base ("CAM BASE")
.
- show2dWorkpieceIn(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Show ingoing 2D workpiece
License requirements: cam_base ("CAM BASE")
.
- show2dWorkpieceOut(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Show outgoing 2D workpiece
License requirements: cam_base ("CAM BASE")
.
- show3dWorkpiece(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Show 3D workpiece
License requirements: cam_base ("CAM BASE")
.
- SHOW_ALL - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption
-
Display label for every grid line
- SHOW_ALL - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Features
-
- SHOW_ALL - Static variable in class nxopen.preferences.HiddenLineSmallFeatureOption
-
Show All
- SHOW_ALL_COMPONENTS - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowComponentsType
-
- SHOW_ATTRIBUTE_OF_SELECTED_OBJECT - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowType
-
- SHOW_DIMENSION - Static variable in class nxopen.MeasureBuilder.AnnotationType
-
- SHOW_EVERY_FOURTH - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption
-
Display label for every fourth grid line
- SHOW_EVERY_OTHER - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption
-
Display label for every other grid line
- SHOW_EVERY_THIRD - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption
-
Display label for every third grid line
- SHOW_FLAG - Static variable in class nxopen.uf.UFConstants
-
- SHOW_INTERSECTION_CURVE - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Action
-
Show intersection curve of interference volumes
- SHOW_OBJECT_ACCORDING_TO_ATTRIBUTE - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowType
-
- SHOW_ONLY - Static variable in class nxopen.cae.Post.GroupVisibility
-
- SHOW_ONLY - Static variable in class nxopen.View.ShowOrHideType
-
- SHOW_PARENT_SELECT_OPTION - Static variable in class nxopen.features.CopyPasteBuilder.BuilderVersion
-
Value of version which introduces parent select option; It should be added since NX8.5.1.
- SHOW_PART_AND_TIP_JUNCTIONS - Static variable in class nxopen.sim.SimDebugBuilder.UiType
-
Show Part And Tip Junction
- showAddButton() - Method in interface nxopen.blockstyler.ListBox
-
Returns the ShowAddButton.
- showAddNewSet() - Method in interface nxopen.blockstyler.SetList
-
Returns the ShowAddNewSet.
- showAdjacent(DisplayableObject[]) - Method in interface nxopen.DisplayManager
-
Display objects adjacent to a set of displayable objects(
CAEFace
,
CAEEdge
).
- showAdjacentBlends() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show adjacent blends
License requirements: None.
- ShowAdjacentBuilder - Interface in nxopen.cae
-
- ShowAdjacentGroupMethod - Interface in nxopen.cae
-
Represents the output from the Show Hide Group smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- showAllDatumAxes() - Method in interface nxopen.SketchAlongPathBuilder
-
Returns the flag to create all datum axes for path having shared edge.
- showAnalysis - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- showAngleLeadingZeros() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the status of leading zeros display in view angle.
- showAngleLeadingZeros() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of leading zeros display in view angle.
- showAngleTrailingZeros() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the status of trailing zeros display in view angle.
- showAngleTrailingZeros() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of trailing zeros display in view angle.
- showAnnotations() - Method in interface nxopen.layout2d.ComponentSettingsBuilder
-
Returns the flag to show annotations or not
License requirements: None.
- showArrowMagnitude - Variable in class nxopen.cae.Post.Mark
-
- showArrowXComponent - Variable in class nxopen.cae.Post.Mark
-
- showArrowYComponent - Variable in class nxopen.cae.Post.Mark
-
- showArrowZComponent - Variable in class nxopen.cae.Post.Mark
-
- showAxis() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show axis
License requirements: None.
- showAxisSubBlock() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowAxisSubBlock
License requirements: None.
- showBackground() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns a value indicating whether to display the background
License requirements: None.
- showBackgroundPlane() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns a value indicating whether to display the grid background plane
License requirements: None.
- showBanner - Variable in class nxopen.uf.UFPlot.BannerOptions
-
- showBlindVolume() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if blind volume will be displayed.
- showBody(boolean) - Method in interface nxopen.features.Feature
-
Show the body created by the feature.
- showBorder - Variable in class nxopen.cae.Post.AnnotationBox
-
- showBoundbox() - Method in interface nxopen.tooling.WorkpieceBuilder
-
Returns the setting to show the bounding box of the product or not
License requirements: None.
- showBreakLines() - Method in interface nxopen.drawings.ViewBreakBuilder
-
Returns the show break lines
License requirements: None.
- showByType(DisplayManager.ShowHideType, DisplayManager.ShowHideScope) - Method in interface nxopen.DisplayManager
-
- showByType(String, DisplayManager.ShowHideScope) - Method in interface nxopen.DisplayManager
-
Shows a set of objects by type.
- showCap() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the cap on off flag
License requirements: None.
- showCenterLines() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show center lines
License requirements: None.
- showCenterPoint() - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
Returns the show center point option for Center Marks
License requirements: None.
- showChanges() - Method in interface nxopen.sim.postconfigurator.PostConfiguratorBuilder
-
Shows the post configurator data changes in the listing window.
- showChannels() - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
Returns the setting for showing/hiding Plc Channels in aspect navigators
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showCheckBoundaryStatus() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show check boundary status
License requirements: None.
- showClearance() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the indication if the distance measurement will be shown.
- showClip() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the clip on off flag
License requirements: None.
- showClippedGhost - Variable in class nxopen.cae.Post.Clipping
-
- showCollaborativeDesignPreview() - Method in interface nxopen.assemblies.Subset
-
Displays the preview for the Collaborative Design in the graphics window.
- showColumnHeadings() - Method in interface nxopen.blockstyler.SetList
-
Returns the ShowColumnHeadings
License requirements: None.
- showColumns() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
Returns the show columns
License requirements: None.
- showComb() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- showCombs() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the show combs
License requirements: None.
- showComponent(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- ShowComponentBuilder - Interface in nxopen.assemblies
-
- showComponents(NXObject[]) - Method in interface nxopen.drawings.DraftingView
-
Shows the specified components in the view.
- showComponents(int, Component[]) - Method in interface nxopen.tooling.BomListBuilder
-
Shows the corresponding components of given row in the BOM List so that the components can be exported to spreadsheet.
- showComponentsInIsolateView(Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Shows array of components in Isolate view
View
.
- ShowComponentsInIsolateViewData() - Constructor for class nxopen.assemblies.ComponentAssembly.ShowComponentsInIsolateViewData
-
- showContents() - Method in interface nxopen.cae.SelectionRecipe
-
Show the contents of the Selection Recipe.
- showContentsOnly() - Method in interface nxopen.cae.SelectionRecipe
-
Shows the contents of the Selection Recipe only.
- showControlPolygon - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- showCracks() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the option to indicate whether to show crack region or not
License requirements: None.
- showCrosshairsToggle() - Method in interface nxopen.display.SelPref
-
Returns the show crosshairs toggle
License requirements: None.
- showCurvatureComb - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- showCurvePreview(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
Show/hide curve preview.
- showCurves() - Method in interface nxopen.display.DynamicSectionBuilder
-
- showCutting() - Method in interface nxopen.cam.PathDisplay
-
Returns the indicator to display only cutting moves in a tool path.
- showDefaultAsOriginal() - Method in interface nxopen.blockstyler.LineWidth
-
Returns the ShowDefaultAsOriginal.
- showDefaultVal() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show default val
License requirements: None.
- showDeformed - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- showDeleteButton() - Method in interface nxopen.blockstyler.ListBox
-
Returns the ShowDeleteButton.
- showDemoCylinder() - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder
-
Returns the indication if demo cylinder will be shown.
- showDemoCylinderRay() - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder
-
Returns the indication if demo cylinder ray will be shown.
- showDescription() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show description
License requirements: None.
- showDeviation() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the show deviation label
License requirements: None.
- showDiameterSymbol() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the attribute which determines whether the diameter symbol is shown or not when stock type is cylinder
License requirements: None.
- showDimension() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the value indicate whether to show bounded box dimension or not during preview.
- showDimensions() - Method in interface nxopen.features.Feature
-
Show all feature dimensions of a feature.
- showDimensions() - Method in interface nxopen.layout2d.ComponentSettingsBuilder
-
Returns the flag to show dimensions or not
License requirements: None.
- showDimensions(DisplayableObject[]) - Method in interface nxopen.Sketch
-
Unblanks dimensions in the active sketch associated with the input sketch geometry
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- showDimensions() - Method in interface nxopen.Sketch
-
Unblanks all the dimensions of input sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- showDimensions(Sketch.ConstraintGeometry[]) - Method in interface nxopen.Sketch
-
Unblanks dimensions in the active sketch associated with the input sketch geometry.
- showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the value indicating if the distance measurement should be displayed.
- showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
Returns
the value to show distance measurement.
- showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
Returns the indication if the distance measurement will be shown.
- showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns
the value to show distance measurement.
- showDistanceMeasurement() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns
the value to show distance measurement.
- showDuplicateElements - Variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings
-
Whether to show duplicate elements
- showDuplicateNodes - Variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings
-
Whether to show duplicate nodes
- showEdgesHiddenByEdges() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show edges hidden by edges
License requirements: None.
- showEditedStatus - Variable in class nxopen.uf.UFCam.Preferences
-
- showElementLabels - Variable in class nxopen.cae.modelcheck.DuplicateElementsCheckBuilder.DisplaySettings
-
Whether to show labels of duplicate elements
- showEndpoints() - Method in interface nxopen.cam.PathDisplay
-
Returns the indicator to display symbol at the end of each motion.
- showEPLAN() - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
Returns the setting for showing/hiding EPLAN objects in aspect navigators
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showExcludes() - Method in interface nxopen.cae.BCSelectionDisplayBuilder
-
- showExpandCollapseMarker() - Method in interface nxopen.blockstyler.Tree
-
Returns the ShowExpandCollapseMarker.
- showExtendedEyes() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if extended eyes will be displayed.
- showEyeLabels() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if eye labels will be displayed.
- showEyePoints() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if eye points will be displayed.
- showFacesWithoutColorAttrirbute() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
The action to show faces without color attributes
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- showFacetEdge() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
Returns the flag indicating if facet edges should be shown.
- showFacetEdges() - Method in interface nxopen.display.FacetSettingsBuilder
-
Returns the state of whether facet edges should be shown for shaded solid and sheet bodies
License requirements: None.
- showFacetEdges() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the show facet edges determines whether or not facet edges will be shown on shaded faces when displaying a drawing sheet
License requirements: None.
- showFacetEdges() - Method in interface nxopen.preferences.PartDrafting
-
Returns the flag indicating whether to display facet edges in shaded member views.
- showFacetEdges() - Method in interface nxopen.preferences.SessionVisualizationShade
-
Returns the show facet edge flag.
- showFaceWithoutAnyManufacturingInformationButton() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
The action to show face without any manufacturing information
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- showFaceWithSameManufacturingInformationButton() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
The action to show face with same manufacturing information
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- showFailedElementsLabel() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
-
Returns the value indicating whether to show label for those failed elements
License requirements: None.
- showFlag() - Method in interface nxopen.cae.ShowHideBuilder
-
Returns the show flag
License requirements: None.
- showFlag - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
-
- showFlowDirectionAndOriginCurve() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the ShowFlowDirectionAndOriginCurve
License requirements: None.
- showFlowDirectionAndOriginCurve() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the ShowFlowDirectionAndOriginCurve
License requirements: None.
- showFlowDirectionAndOriginCurve() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the ShowFlowDirectionAndOriginCurve
License requirements: None.
- showFocusHandle() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the ShowFocusHandle
License requirements: None.
- showFocusHandle() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the ShowFocusHandle
License requirements: None.
- showFocusHandle() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the ShowFocusHandle
License requirements: None.
- showFocusHandle() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the ShowFocusHandle
License requirements: None.
- showFormboardConstraints() - Method in interface nxopen.formboard.FormboardManager
-
Shows all of the hidden formboard constraints.
- showFrequencyBandSummation() - Method in interface nxopen.cae.xyplot.GraphOptionsStyle2D
-
Returns a value specifies whether to show frequency band summation
License requirements: None.
- showGrid() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the show grid display flag
License requirements: None.
- showGrid() - Method in interface nxopen.preferences.WorkPlane
-
Returns the show and hide grid flag.
- showGrid - Variable in class nxopen.uf.UFDisp.Grid
-
- showGroup() - Method in interface nxopen.cae.CaeGroup
-
Show this group.
- showGuides - Variable in class nxopen.cae.Post.AnimationStreamline
-
- showHandle() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the ShowHandle
License requirements: None.
- showHandle() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the ShowHandle.
- showHandle() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the ShowHandle
License requirements: None.
- showHandleHints() - Method in interface nxopen.preferences.VisualizationHandles
-
Returns the show handle hints flag.
- showHeader() - Method in interface nxopen.blockstyler.Tree
-
Returns the ShowHeader
License requirements: None.
- showHiddenLines() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show hidden lines
License requirements: None.
- ShowHideBuilder - Interface in nxopen.cae
-
- showHideConnectionDirection(boolean) - Method in interface nxopen.ame.DiagramManager
-
Show/Hide Connection Direction symbol of ports on schematics pages.
- ShowHideGroupMethod - Interface in nxopen.cae
-
Represents the output from the Show Hide Group smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- ShowHideManager - Interface in nxopen.cae
-
Provides method for creating builder for
Show Hide operation commands in a fem/sim part
To obtain an instance of this class, refer to
CaePart
Created in NX5.0.0
- showHideMgr() - Method in interface nxopen.cae.CaePart
-
Returns the show hide manager belonging to the part .
- showHideObjects() - Method in interface nxopen.ame.AspectNavigatorPreferencesBuilder
-
Returns the show hide objects builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ShowHideObjectsBuilder - Interface in nxopen.ame
-
- showImageInformation() - Method in interface nxopen.ModelingViewHighQualityImage
-
Shows information about the last image rendered.
- showInadequateStretch() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the option to indicate whether to show lack of stretching region or not
License requirements: None.
- showInAutomation() - Method in interface nxopen.ame.AspectDetailsBuilder
-
Returns the availability in Automation Navigator
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInAutomation() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
Returns the show in automation
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInAutomation() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the show in automation
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInflection() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- showInflectionPoints() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the flag to show the inflection points of planar sections
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- showInflections() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the show inflections
License requirements: None.
- showInflections - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- showInfo() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns
the option to display numbers of various type of defects identified or repaired in the
ListingWindow
.
- showInfo() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
The function displays the information box with information about the section intertia analysis performed.
- showInformationWindow() - Method in interface nxopen.facet.STLImportBuilder
-
Returns the indicator for whether to show information window
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- showInformationWindow() - Method in interface nxopen.features.MathIntegrationBuilder
-
Returns the option to show the information window
License requirements: None.
- showInfoWindow() - Method in interface nxopen.tooling.StandardPartBuilder
-
Returns the flag to indicate whether to show the Information Window.
- showInFunction() - Method in interface nxopen.ame.AspectDetailsBuilder
-
Returns the availability in Function Aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInFunction() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
Returns the show in function
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInFunction() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the show in function
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInGraphicView() - Method in interface nxopen.features.ConstructionFeatureData
-
Returns the construction feature visibility in Graphic View
License requirements: solid_modeling ("SOLIDS MODELING")
.
- showInGraphicView() - Method in interface nxopen.features.OutputFeatureData
-
Returns the output feature visibility in Graphic View
License requirements: solid_modeling ("SOLIDS MODELING")
.
- showInLocation() - Method in interface nxopen.ame.AspectDetailsBuilder
-
Returns the availability in Location Aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInLocation() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
Returns the show in location
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInLocation() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the show in location
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInProduct() - Method in interface nxopen.ame.AspectDetailsBuilder
-
Returns the availability in Product Aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInProduct() - Method in interface nxopen.ame.BulkEngineeringObjectBuilder
-
Returns the show in product
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInProduct() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the show in product
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showInterference() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the interference on off flag.
- showInteriorFeatureCurves() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the show interior feature curves toggle value
License requirements: None.
- showInternalParentFeatureForEdit(Feature) - Method in interface nxopen.features.FeatureBuilder
-
Unsuppress an internal parent feature (a slave feature) so it can be edited.
- showIsoclineNegative() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the negative isocline
License requirements: None.
- showIsoclinePositive() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the positive isocline
License requirements: None.
- showJoints() - Method in interface nxopen.weld.WeldJointBuilder
-
- showKinematicModelState() - Method in interface nxopen.sim.SimDebugBuilder
-
Show the kinematic model state
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- showKnot() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- showKnots - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- showLabel() - Method in interface nxopen.blockstyler.LineColorFontWidth
-
Returns the Show Label flag.
- showLabel() - Method in interface nxopen.display.BoundedGridBuilder
-
Returns the show labels
License requirements: None.
- showLabels() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show labels
License requirements: None.
- showLabels() - Method in interface nxopen.preferences.WorkPlane
-
Returns the show and hide grid labels flag.
- showLabels - Variable in class nxopen.uf.UFDisp.Grid
-
- showLabelWithLeader() - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder
-
Returns the show hole label with leader
License requirements: None.
- showLayoutOrigin() - Method in interface nxopen.layout2d.GeneralPreferencesBuilder
-
Returns the flag controling the visibility of layout origin symbols in the session
License requirements: None.
- showLeadersToggle() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Returns the show leaders toggle
License requirements: routing_harness ("Routing Harness")
.
- showLockedDeletedContent() - Method in interface nxopen.annotations.TabularNoteStyleBuilder
-
Returns the locked deleted row method
License requirements: None.
- showLockedDeletedRows() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the show locked deleted rows option to show rows that are locked, but reference components that have been removed from the assembly
License requirements: None.
- showMaintainLayerOption() - Method in interface nxopen.blockstyler.LayerBlock
-
Returns the Show Maintain Layer Option
If set to true, Maintain option is displayed in layer options
License requirements: None.
- showMajorLines() - Method in interface nxopen.display.GridBuilder
-
Returns the show major lines
License requirements: None.
- showMapTopo() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show map topo
License requirements: None.
- showMarkup() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the show tolerance markup
License requirements: None.
- showMaximum() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the show maximum label
License requirements: None.
- showMaxLabels() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the show max labels
License requirements: None.
- showMergedNodeLabels - Variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings
-
Whether to show merged node labels
- showMinimum() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the show minimum label
License requirements: None.
- showMinLabels() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the show min labels
License requirements: None.
- showModelViewBorders() - Method in interface nxopen.preferences.PartVisualizationNamesBorders
-
Returns the show model view border flag. allows to turn on and off the display of view borders.
- showModelViewNames() - Method in interface nxopen.preferences.PartVisualizationNamesBorders
-
Returns the show model view names flag.
- showMoveUpDownButtons() - Method in interface nxopen.blockstyler.ListBox
-
Returns the ShowMoveUpDownButtons.
- showMultipleColumns() - Method in interface nxopen.blockstyler.Tree
-
Returns the ShowMultipleColumns
License requirements: None.
- showName() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show name
License requirements: None.
- showNavigator(int, String, String, String) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Shows the navigator.
- showNeedle() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the show needle
License requirements: None.
- showNeedles() - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
Returns the show needles flag
License requirements: None.
- showNextPlot(int, int) - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Shows the next plot on the view port of specific device
License requirements: None.
- showNodeLabels() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
Returns a value indicating whether to show the labels for
proximity nodes are off underlying CAD geometry.
- showNodeLocations() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
Returns a value indicating whether to show original location and adjusted location
for the proximity nodes that are off the underlying CAD geometry by a given tolerance.
- showNodesRelatedToDisplayedElements(boolean) - Method in interface nxopen.DisplayManager
-
Display all nodes related to displayed elements.
- showNoncutting() - Method in interface nxopen.cam.PathDisplay
-
Returns the indicator to display only non cutting moves in a tool path.
- showObjects(DisplayableObject[], DisplayManager.LayerSetting) - Method in interface nxopen.DisplayManager
-
Unblank a set of displayable objects considering the following layer settings if the objects are in invisible layers.
- SHOWONLY - Static variable in class nxopen.cae.PostShowhideBuilder.Vis
-
- showOnly(DisplayableObject[]) - Method in interface nxopen.DisplayManager
-
Show a set of displayable objects.
- showOnly() - Method in interface nxopen.features.PartModule
-
Shows all displayable objects of part module and hides all other objects in the part
License requirements: solid_modeling ("SOLIDS MODELING")
.
- ShowOnlyBuilder - Interface in nxopen.cae
-
- showOnlyGroup() - Method in interface nxopen.cae.CaeGroup
-
Shows this group only.
- showOnlyPartModule() - Method in interface nxopen.features.PartModuleBuilder
-
- showOnTop() - Method in interface nxopen.display.GridBuilder
-
Returns the show on top
License requirements: None.
- showOptionLabels() - Method in interface nxopen.blockstyler.LineFont
-
Returns the show option labels
License requirements: None.
- showOrderedAbscissa() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D
-
Returns a value indicating whether to show the data by ordered abscissa or not
License requirements: None.
- showOrderGrid() - Method in interface nxopen.cae.xyplot.GridStyle2DColorContour
-
Returns the show order grid value
License requirements: None.
- showOriginalLayerOption() - Method in interface nxopen.blockstyler.LayerBlock
-
Returns the Show Original Layer Option
If set to true, Original option is displayed in layer options
License requirements: None.
- showOutline - Variable in class nxopen.cae.Post.Clipping
-
- showOutline() - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
Returns the outline visibility
License requirements: None.
- showOutline() - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting
-
Returns a value indicating whether to display the outline
License requirements: None.
- showOutline() - Method in interface nxopen.cae.xyplot.BasePlateStyleSetting
-
- showOutline() - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
-
- showOutOfTolerance() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the show out of tolerance only
License requirements: None.
- showOutOfTolerance() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the out of tolerance only flag
License requirements: None.
- showOutRangeLabels() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the show out of range labels
License requirements: solid_modeling ("SOLIDS MODELING")
.
- showOverflowAbove - Variable in class nxopen.cae.Post.Colorbar
-
- showOverflowBelow - Variable in class nxopen.cae.Post.Colorbar
-
- showOverflowValues() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show overflow
License requirements: None.
- showParents(boolean) - Method in interface nxopen.features.Feature
-
Show the body created by the parent feature.
- showPartAndClearanceHoleOnly() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the option to show selected part and clearance hole only.
- showPartingLine() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the show parting line
License requirements: None.
- showPath() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if demo cylinder path will be displayed.
- showPathPoints() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if demo cylinder point position on path will be displayed.
- showPeak() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- showPeakPoints() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the flag to show the peak points of the sections
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- showPeaks() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the show peaks
License requirements: None.
- showPeaks - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- showPendulum() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the value indicating if this pendulum is displayed.
- showPictures() - Method in interface nxopen.cam.Preferences
-
Returns the show pictures
License requirements: None.
- showPipe() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns a value that indicates whether to show pipe
License requirements: None.
- showPlacedFragments() - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
Returns the setting for showing/hiding placed fragments in aspect navigators
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showPlaneSubBlock() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowPlaneSubBlock
License requirements: None.
- showPlot() - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings
-
Returns the option of show plot.
- showPoint() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the value indicating if the contact point (if any) between this pendulum and the bumper is displayed.
- showPoints() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the show points to determine whether to create points or not.
- showPole() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- showPositioningDimensions() - Method in interface nxopen.features.RPOBuilder
-
Displays all the positioning dimensions
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- showPreviousPlot(int, int) - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Shows the previous plot on the view port of specific device
License requirements: None.
- showProductOutline(boolean) - Method in interface nxopen.assemblies.ProductOutlineManager
-
Controls the visibility of already defined product outline.
- showRays() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the indication if the vision rays are created.
- showRays() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the show rays to determine whether to create ray lines or not.
- showReferenceCalloutSuffix() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the flag indicating whether the reference callout suffix will be displayed.
- showReferenceGeometry() - Method in interface nxopen.layout2d.ComponentSettingsBuilder
-
Returns the flag to show reference geometry or not
License requirements: None.
- showReferenceSubBlock() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowReferenceSubBlock
License requirements: None.
- ShowRelatedFacesBuilder - Interface in nxopen.features
-
Represents a builder for a Show Related Faces.
- showRemove() - Method in interface nxopen.blockstyler.SetList
-
Returns the ShowRemove.
- showReorderControls() - Method in interface nxopen.blockstyler.SetList
-
Returns the ShowReorderControls
License requirements: None.
- showReport() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the show report status, if true, then show the report of result
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- showResult() - Method in interface nxopen.tooling.SolidPatchBuilder
-
Show result button to write the patch and link this information to the list window.
- showResults() - Method in interface nxopen.Builder
-
Updates the model to reflect the result of an edit to the model for all builders that support showing results.
- showRetainedAnnotations() - Method in interface nxopen.annotations.RetainedAnnotationsBuilder
-
Returns the flag indicating to show the retained annotations.
- showRetainedNodeLabels - Variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings
-
Whether to show retained node labels
- showRiskOfCracks() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the option to indicate whether to show risk of cracks region or not
License requirements: None.
- showRotationAngle - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- showRotationSymbol - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- showRows(int[]) - Method in interface nxopen.tooling.BomListBuilder
-
Shows the given rows in the BOM List so that all the components of the rows can be exported to spreadsheet.
- showScaleValue() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the ShowScaleValue
License requirements: None.
- showScaleValue() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the ShowScaleValue
License requirements: None.
- showSceneControl() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowSceneControl
License requirements: None.
- showSectionCurves(boolean) - Method in interface nxopen.display.DynamicSectionBuilder
-
Shows the section curves in the view associated with the builder.
- showSectionLength() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the flag to show the section length labels
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- showSectionLine() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the value to show section line with or without view
License requirements: None.
- showSelectableProductOutline(boolean) - Method in interface nxopen.assemblies.ProductOutlineManager
-
Controls the visibility and selectability of already defined product outline.
- showSelection() - Method in interface nxopen.blockstyler.SelectElement
-
- showSelection() - Method in interface nxopen.blockstyler.SelectNode
-
- showSelfHiddenLines() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show self hidden lines
License requirements: None.
- showSetting() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the show or hide value access functions
License requirements: None.
- showSevereThinning() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the option to indicate whether to show excessive thinning region or not
License requirements: None.
- showShadedFaceEdges - Variable in class nxopen.uf.UFDisp.SystemParams
-
- showShortcuts() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Returns the ShowShortcuts
License requirements: None.
- showShortcuts() - Method in interface nxopen.blockstyler.SpecifyPlane
-
Returns the ShowShortcuts
License requirements: None.
- showShortcuts() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the ShowShortcuts
License requirements: None.
- showShortcuts() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the ShowShortcuts
License requirements: None.
- showSightRays() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if blind volume sight rays will be displayed.
- showSimuationUiInModeling() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option to specify whether simulation specific UI should show up in modeling
License requirements: None.
- showSmoothEdgeEndGapsLock() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show end gaps lock
License requirements: None.
- showSmoothEdgeEndGapsValue() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show end gaps value
License requirements: None.
- showSmoothEdges() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show smooth edges
License requirements: None.
- showSmoothEdges() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
Returns the Show Smooth Edges toggle on Secondary Geometry tab of View Style Dialog.
- showSnapshot(boolean, Snapshot) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Show snapshot
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- showSoftwareBlocks() - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
Returns the setting for showing/hiding software blocks in aspect navigators
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showSolids(boolean) - Method in interface nxopen.weld.CustomManager
-
Method to change display mode of all Weld.PointMarkPoint feature that are fully loaded in an assembly
License requirements: None.
- showSolids() - Method in interface nxopen.weld.PointMarkBuilder
-
Returns the display mode.
- showSpinning3dWorkpiece(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Show spinning 3D workpiece
License requirements: cam_base ("CAM BASE")
.
- showSplineMinimumRadius() - Method in interface nxopen.routing.SplinePathBuilder
-
Returns whether the spline minimum radius value should be displayed or not.
- showSrcTblVals() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show dep src tbl vals
License requirements: None.
- showStandardType - Variable in class nxopen.uf.UFCam.Preferences
-
- showSubItem(int) - Method in interface nxopen.uistyler.MultiSelectList
-
Requests a list entry to be scrolled up to the first line in the list
License requirements: None.
- showSubItem(int) - Method in interface nxopen.uistyler.SelectionBox
-
Requests that a list entry be scrolled up to the first line in the list.
- showSubItem(int) - Method in interface nxopen.uistyler.SingleSelectList
-
Requests that a list entry be scrolled up to the first line in the list
License requirements: None.
- showSubsetStructure() - Method in interface nxopen.assemblies.Subset
-
Returns
the subset structure to be shown or not.
- showSummary(String, String, String) - Method in interface nxopen.pdm.WebAppSession
-
Send data to Active Workspace from NX
License requirements: None.
- showSurface() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the option to indicate whether to show surface or not.
- showSurface() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the option to indicate whether to show surface or not.
- showSurfaceAngles() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the indication if the surface angles analysis display is on or off.
- showTags() - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
Returns the setting for showing/hiding Plc Tags in aspect navigators
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showTaskNavigator() - Method in interface nxopen.blockstyler.Wizard
-
Returns the ShowTaskNavigator.
- showTemplateType - Variable in class nxopen.uf.UFCam.Preferences
-
- showText() - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
Returns the text visibility
License requirements: None.
- showThroughAssemblyState() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the through assy coordinate system state
License requirements: ugweld ("UG WELD")
.
- showThroughDisplay() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the show through display
License requirements: None.
- showThroughWorkPartState() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the through work coordinate system state
License requirements: ugweld ("UG WELD")
.
- showToolCenter() - Method in interface nxopen.cam.PathDisplay
-
Returns the indicator to display tool path at the tool center instead of the tool tip for a ball mill.
- showToolName - Variable in class nxopen.uf.UFCam.Preferences
-
- showToolPath(CAMObject) - Method in interface nxopen.cam.PathDisplay
-
Show tool path
License requirements: None.
- showToolTips() - Method in interface nxopen.blockstyler.Tree
-
Returns the ShowToolTips
License requirements: None.
- showTorsoLine() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the indication if torso line will be displayed.
- showTotalResponseLineForPolar() - Method in interface nxopen.cae.xyplot.GraphOptionsStyle2D
-
Returns a value specifies whether to show total response line for 2D polar plot
License requirements: None.
- showTotalResponseLineForVector() - Method in interface nxopen.cae.xyplot.GraphOptionsStyle2D
-
Returns a value specifies whether to show total response line for 2D vector plot
License requirements: None.
- showTraceLines() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show trace lines
License requirements: None.
- showTransformVectors() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the option to show temporary transform vectors in preview
License requirements: None.
- showTransformVectors() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the option to show temporary transform vectors in preview
License requirements: None.
- showTwistRate() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the indication if the twist rate analysis display is on or off.
- showTypeEnum() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the show type enumeration
License requirements: None.
- showUndefinedValues() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- showUndefValues() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show new undefined values
License requirements: None.
- showUnderflowValues() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the show underflow
License requirements: None.
- showUnplacedFragments() - Method in interface nxopen.ame.ShowHideObjectsBuilder
-
Returns the setting for showing/hiding the setting for unplaced fragments in aspect navigators
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- showUserDefinedLayerOption() - Method in interface nxopen.blockstyler.LayerBlock
-
Returns the Show User Defined Layer Option
If set to true, User Defined option is displayed in layer options
License requirements: None.
- showUVGrids() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show uvgrids
License requirements: None.
- showVIEndGapsLock() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show end gaps lock
License requirements: None.
- showVIEndGapsValue() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show end gaps value
License requirements: None.
- showView(int) - Method in interface nxopen.shipdesign.Navigator
-
Shows a navigator view.
- showViewBorder() - Method in interface nxopen.drawings.DraftingView
-
Show the view border of the view.
- showViewer() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the 2D viewer display flag
License requirements: None.
- showViewLabel() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the show view label
License requirements: None.
- showViewLabel() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the show view label
License requirements: None.
- showViewLabel() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the show view label
License requirements: None.
- showViewScale() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the show view scale
License requirements: None.
- showViewScale() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the show view scale
License requirements: None.
- showViewScale() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the show view scale
License requirements: None.
- showVirtualIntersections() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the show virtual intersections
License requirements: None.
- showVirtualIntersections() - Method in interface nxopen.drawings.ViewStyleSecondaryComponentsBuilder
-
Returns the Show Virtual Intersections toggle on Secondary Geometry tab of View Style Dialog.
- showVisionCone() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the indication if the vision cone is shown.
- showVisualization() - Method in interface nxopen.motion.RoadBuilder
-
Returns the show visualization
License requirements: mechanisms ("MECHANISMS")
.
- showWebAngles() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the indication if the web angle analysis display is on or off.
- showWidths() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the show widths flag.
- showWidths() - Method in interface nxopen.preferences.PartVisualizationLine
-
Returns the show widths option.
- showWidths - Variable in class nxopen.preferences.PartVisualizationLine.WidthOptionsData
-
the show widths option, which controls whether or not the
object width attribute determines the displayed width of
lines and curves.
- showWidths - Variable in class nxopen.uf.UFDisp.DrawingDisplayData
-
- showWireframe() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the option to indicate whether to show curve or not.
- showWireframe() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the option to indicate whether to show curve or not.
- showWorkCsys() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the option to control if the work coordinate system should be showing.
- showWorkLayerOption() - Method in interface nxopen.blockstyler.LayerBlock
-
Returns the Show Work Layer Option
If set to true, Work option is displayed in layer options
License requirements: None.
- showWrinkles() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the option to indicate whether to show wrinkled region or not
License requirements: None.
- showWrinklingTendency() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the option to indicate whether to show tendency to wrinkle region or not
License requirements: None.
- showXAxis() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowXAxis
License requirements: None.
- showXmlReport() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
Returns the flag to indicate whether or not to show the xml report on copy basic design part results
License requirements: None.
- showXmlReport() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Returns the flag to indicate whether or not to show the xml report on copy paste results
License requirements: None.
- showXYPlane() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowXYPlane
License requirements: None.
- showXZPlane() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowXZPlane
License requirements: None.
- showYAxis() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowYAxis
License requirements: None.
- showYZPlane() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowYZPlane
License requirements: None.
- showZAxis() - Method in interface nxopen.blockstyler.OrientXpress
-
Returns the ShowZAxis
License requirements: None.
- showZeroContour() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the option to show zero curvature contour line.
- SHRINK - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.OriginalSurfaceSmoothingOption
-
Allows the nodes on original surface to be moved towards the inside only
- SHRINK - Static variable in class nxopen.cae.optimization.TBSTestFunction.Direction
-
Standard Shrinkage
- SHRINK_TEXT - Static variable in class nxopen.diagramming.TextStyleBuilder.TextAutoFitType
-
- SHRINK_TO_FIT - Static variable in class nxopen.diagramming.tables.OverflowBehavior
-
Shrink to fit overflow behavior
- shrinkage() - Method in interface nxopen.tooling.InitProjectBuilder
-
Returns the shrinkage access functions
License requirements: None.
- shrinkFactor - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- shroudColor() - Method in interface nxopen.cam.Preferences
-
Returns the shroud color
License requirements: None.
- shroudGeometry() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the shroud geometry
License requirements: cam_base ("CAM BASE")
.
- shroudStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the shroud stock
License requirements: None.
- shuffleRandomColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Allows user to shuffle the Random color
License requirements: None.
- SI - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
SI: Meter (newton)
- SI - Static variable in class nxopen.cae.XyFunctionUnitSystem
-
International standard unit
- SI - Static variable in class nxopen.cae.xyplot.UnitSystem
-
Deprecated.
International standard unit
- side - Variable in class nxopen.cae.Post.Clipping
-
- side - Variable in class nxopen.cam.CAMObject.WireEdmFeedRateData
-
the feed rate side
- side() - Method in interface nxopen.cam.CutSides
-
Returns the Sides to Cut
License requirements: None.
- SIDE - Static variable in class nxopen.cam.ToolChangeCiBuilder.HeadDesignationTypes
-
Side
- side() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the side to use for positioning this pendulum.
- side() - Method in interface nxopen.HumanHandsDialogBuilder
-
Returns the side
License requirements: ug_human ("Human Modelling")
.
- side() - Method in interface nxopen.weld.JointExitBuilder
-
Returns the side edge preparation values will be applied to
License requirements: None.
- side1() - Method in interface nxopen.annotations.Centerline2dBuilder
-
Returns the side 1 of 2D Centerline for centerline from curves
License requirements: None.
- SIDE1 - Static variable in class nxopen.cae.MeshControlBuilder.WeldSide
-
- SIDE1 - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType
-
Use side 1 faces as mid sheet
- SIDE1 - Static variable in class nxopen.features.sheetmetal.AeroJoggleBuilder.SideType
-
Side 1 (only side of single)
- SIDE1 - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides
-
Side 1 only
- SIDE1 - Static variable in class nxopen.features.sheetmetal.GussetBuilder.WidthSides
-
The Gusset will be created on the side of plane normal of the user defined profile.
- side1 - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
-
- side1Faces - Variable in class nxopen.cae.AutoPairs.CreateFacePairsData
-
side 1 faces
- side1NormalVectorI() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the I component of the normal vector of the plane on the first side of the parpln
License requirements: None.
- side1NormalVectorJ() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the J component of the normal vector of the plane on the first side of the parpln
License requirements: None.
- side1NormalVectorK() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the K component of the normal vector of the plane on the first side of the parpln
License requirements: None.
- side1Options() - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
Returns the joggle side 1 options
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- side1PointX() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the X coordinate of the center of the plane on the first side of the parpln
License requirements: None.
- side1PointY() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the Y coordinate of the center of the plane on the first side of the parpln
License requirements: None.
- side1PointZ() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the Z coordinate of the center of the plane on the first side of the parpln
License requirements: None.
- side1Welds() - Method in interface nxopen.weld.CompoundWeldBuilder
-
Returns the weld features defining side 1 of the compound weld.
- side2() - Method in interface nxopen.annotations.Centerline2dBuilder
-
Returns the side 2 of 2D Centerline for centerline from curves
License requirements: None.
- SIDE2 - Static variable in class nxopen.cae.MeshControlBuilder.WeldSide
-
- SIDE2 - Static variable in class nxopen.features.sheetmetal.AeroJoggleBuilder.SideType
-
Side 2
- SIDE2 - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides
-
Side 2 only
- SIDE2 - Static variable in class nxopen.features.sheetmetal.GussetBuilder.WidthSides
-
The Gusset will be created on the opposite side of the plane normal of the user defined profile.
- side2 - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
-
- side2Faces - Variable in class nxopen.cae.AutoPairs.CreateFacePairsData
-
side 2 faces
- side2NormalVectorI() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the I component of the normal vector of the plane on the second side of the parpln
License requirements: None.
- side2NormalVectorJ() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the J component of the normal vector of the plane on the second side of the parpln
License requirements: None.
- side2NormalVectorK() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the K component of the normal vector of the plane on the second side of the parpln
License requirements: None.
- side2Options() - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
Returns the joggle side 2 options
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- side2PointX() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the X coordinate of the center of the plane on the second side of the parpln
License requirements: None.
- side2PointY() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the Y coordinate of the center of the plane on the second side of the parpln
License requirements: None.
- side2PointZ() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the Z coordinate of the center of the plane on the second side of the parpln
License requirements: None.
- side2Welds() - Method in interface nxopen.weld.CompoundWeldBuilder
-
Returns the weld features defining side 2 of the compound weld.
- SIDE_CUT - Static variable in class nxopen.cam.CamOperationMotionType
-
- SIDE_CUT - Static variable in class nxopen.cam.CamPathMotionType
-
- SIDE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.Side
-
- SIDE_LEFT - Static variable in class nxopen.uf.UFPath.Side
-
- SIDE_LENGTH - Static variable in class nxopen.SketchPolygonBuilder.SizeType
-
side length
- SIDE_ON - Static variable in class nxopen.uf.UFPath.Side
-
- SIDE_PASSES_FIRST - Static variable in class nxopen.cam.MultiplePassesBuilder.OrderTypes
-
Side First
- SIDE_RIGHT - Static variable in class nxopen.uf.UFPath.Side
-
- SIDE_UNDEFINED - Static variable in class nxopen.uf.UFPath.Side
-
- sideAngle() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the Side Angle used by the Drawn Cutout.
- sideAngle() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the side angle.
- sideAngleBuilder() - Method in interface nxopen.cam.GrooveToolBuilder
-
Returns the side angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- sideAttributeValue() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the side attribute value for shim.
- sideCrossPosition() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the cross position type of side barrier.
- sideCut() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the side cut
License requirements: None.
- sideEdgeShapeOption() - Method in interface nxopen.features.ExtendSheetBuilder
-
Returns the direction by which the edge is extended
License requirements: None.
- sideFromCenterlineEnum() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the side from center line
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- sideHeightAboveRoad() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the height above road value of side barrier.
- sideIncrement() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Side Increment
License requirements: None.
- sideLoading() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the loading applied to the vehicle side used in the crash barrier.
- sideLock - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- sideMargin() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the side margin on each end of the profile.
- sideOffset() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the side offset:
Offset from pad boundary to define the sidewall draft.
- sideOneSelection() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the side one faces for manual pair
License requirements: None.
- sideOverlapPercentage() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the overlap percentage of side barrier.
- sideOverlapSide() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the overlap side type of side barrier.
- sidePosition() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the position type of side barrier.
- sidePositionObject() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the side position object type of side barrier.
- sideRailFeature() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the side rail feature for this head impact study.
- sideRefAngle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the angle that is used to determine the side reference line
License requirements: None.
- sideRefAngleMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the marginal angle that is used to determine the side reference line
License requirements: None.
- sideRefAngleNcap() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the European NCAP (New Car Assessment Program) angle that is used to determine the side reference line
License requirements: None.
- sideRefAngleNcapMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the European NCAP (New Car Assessment Program) marginal angle that is used to determine the side reference line
License requirements: None.
- sideReferenceAngleNcapSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the European NCAP (New Car Assessment Program) second marginal angle that is used to determine the side reference line
License requirements: None.
- sideReferenceAngleSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the second marginal angle that is used to determine the side reference line
License requirements: None.
- sideSeamDisplay() - Method in interface nxopen.annotations.LineWeldData
-
Returns the flag indicating whether the side seam is displayed
License requirements: None.
- sideSeamHorizontalFlip() - Method in interface nxopen.annotations.LineWeldData
-
Returns the flag indicating whether the side seam is flipped in the horizontal
direction
License requirements: None.
- sideSeamObjects() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the side seam object
License requirements: None.
- sideSeamVerticalFlip() - Method in interface nxopen.annotations.LineWeldData
-
Returns the flag indicating whether the side seam is flipped in the vertical
direction
License requirements: None.
- sideSeamView() - Method in interface nxopen.annotations.LineWeldData
-
Returns the view for which side seam is to be created.
- sideShape() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the shape type of side barrier.
- sideShift() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the shift value of side barrier.
- sideStepMethod() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Side Step Method
License requirements: None.
- sidesToCut() - Method in interface nxopen.cam.BladeFinish
-
Returns the Sides to Cut
License requirements: None.
- sidesToCut() - Method in interface nxopen.cam.BlendFinish
-
Returns the Sides to Cut
License requirements: None.
- sidesType() - Method in interface nxopen.cam.MachiningRegionBuilder
-
Returns the machining sides type
License requirements: None.
- sideTwoSelection() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the side two faces for manual pair
License requirements: None.
- sideUserDefineLength() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the user defined width type of side barrier.
- sideUserDefineLengthValue() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the expression containing the user defined width value of side barrier.
- SIDEWALL - Static variable in class nxopen.features.EmbossJoggle.JoggleDirectionMethod
-
Indicates joggle direction to along sidewall direction.
- sidewall() - Method in interface nxopen.features.EmbossRegion
-
Returns the emboss sidewall object
License requirements: None.
- sidewallOption() - Method in interface nxopen.features.EmbossSidewall
-
Returns the method to create sidewall
License requirements: None.
- sidewallType() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Returns the side where the material must be added to the dimple.
- sidewallType() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the side where the material must be added to the Drawn Cutout.
- SIDEWAYS_OFFSET - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointOffsetTypes
-
Sideways offset
- sideWeb() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the type of the overlap on the strip.
- sightLineCutType() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the value that specifies if and where to create sight line cuts
License requirements: None.
- sigma - Variable in class nxopen.cae.aerostructures.author.ABB.StressFromStrainInPlasticDomainData
-
Stress
- sigmaallowable - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedCompressiveData
-
Stress allowable
- sigmaallowable - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedShearData
-
Stress allowable
- sigmaallowable - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatBendingData
-
Stress allowables
- sigmaallowable - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatCompressiveData
-
Stress allowable
- sigmaallowable - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatShearData
-
Stress allowable
- sigmabcr - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalBendingCombinedData
-
Bending stress allowable
- sigmabcr - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatShearBendingCombinedData
-
Bending stress allowable
- sigmacr - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedLongitudinalShearCombinedData
-
Compressive stress allowable
- sigmacr - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalBendingCombinedData
-
Compressive stress allowable
- sigmacr - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalShearCombinedData
-
Compressive stress allowable
- sign - Variable in class nxopen.uf.UFModeling.AskBooleanWithRetainedOptionsData
-
- sign - Variable in class nxopen.uf.UFModl.SweepTrimObject
-
- SIGNAL - Static variable in class nxopen.mechatronics.GraphControlBuilder.MasterType
-
Signal
- signal() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the signal select.
- Signal - Interface in nxopen.mechatronics
-
Represents the Signal class
To create or edit an instance of this class, use
SignalBuilder
Created in NX11.0.0
- Signal() - Constructor for class nxopen.mechatronics.SignalBuilder.Signal
-
- Signal(NXObject, int, SignalBuilder.IOType, SignalBuilder.DataType, Expression, Expression, Expression) - Constructor for class nxopen.mechatronics.SignalBuilder.Signal
-
Constructor for the Signal object.
- signal() - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
Returns the signal object.
- signal() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the signal select.
- Signal() - Constructor for class nxopen.mechatronics.TCPClientBuilder.Signal
-
- Signal(String, SignalBuilder.ExternalSignalIOType, SignalBuilder.DataType, String) - Constructor for class nxopen.mechatronics.TCPClientBuilder.Signal
-
Constructor for the Signal object.
- Signal() - Constructor for class nxopen.mechatronics.TCPSignalServerBuilder.Signal
-
- Signal(NXObject, boolean, String) - Constructor for class nxopen.mechatronics.TCPSignalServerBuilder.Signal
-
Constructor for the Signal object.
- Signal() - Constructor for class nxopen.mechatronics.UDPSignalClientBuilder.Signal
-
- Signal(String, SignalBuilder.IOType, SignalBuilder.DataType, String) - Constructor for class nxopen.mechatronics.UDPSignalClientBuilder.Signal
-
Constructor for the Signal object.
- Signal() - Constructor for class nxopen.mechatronics.UDPSignalServerBuilder.Signal
-
- Signal(NXObject, boolean, String) - Constructor for class nxopen.mechatronics.UDPSignalServerBuilder.Signal
-
Constructor for the Signal object.
- SIGNAL_CHART - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices
-
Deprecated.
Signal Chart
- SIGNAL_PROCESSING - Static variable in class nxopen.cae.CaePart.FieldApplicationType
-
Application which allows to specify additional attributes (e.g. acoustical weighting) on a field
- SignalAdapter - Interface in nxopen.mechatronics
-
Represents the Signal Adapter class.
- SignalAdapterBuilder - Interface in nxopen.mechatronics
-
- SignalAdapterBuilder.DataPortType - Class in nxopen.mechatronics
-
Represents the data port type.
- SignalAdapterBuilder.DataType - Class in nxopen.mechatronics
-
Represents the data type.
- SignalAdapterBuilder.ParameterData - Class in nxopen.mechatronics
-
Defines the parameter data.
- SignalAdapterBuilder.SignalData - Class in nxopen.mechatronics
-
Defines the signal data.
- SignalAdapterCollection - Interface in nxopen.mechatronics
-
Represents a collection of Signal Adapter.
- signalAdapters() - Method in interface nxopen.mechatronics.PhysicsManager
-
- SignalBuilder - Interface in nxopen.mechatronics
-
- SignalBuilder.DataType - Class in nxopen.mechatronics
-
Represents the data type.
- SignalBuilder.ExternalSignalIOType - Class in nxopen.mechatronics
-
Represents the external signal IO type.
- SignalBuilder.IOType - Class in nxopen.mechatronics
-
Represents the IO type.
- SignalBuilder.Signal - Class in nxopen.mechatronics
-
Represents Signal definition structure.
- signalChart() - Method in interface nxopen.motion.DriverOperation
-
Returns the signal chart
License requirements: None.
- SignalChart - Interface in nxopen.motion
-
Represents a motion Signal Chart object
To create or edit an instance of this class, use
SignalChartBuilder
Created in NX6.0.0
- SignalChartBuilder - Interface in nxopen.motion
-
- SignalChartBuilder.Type - Class in nxopen.motion
-
SignalChart type
- SignalChartCollection - Interface in nxopen.motion
-
Represents a collection of motion Signal Chart
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- SignalChartListItem - Interface in nxopen.motion
-
- SignalChartListItem.Condition - Class in nxopen.motion
-
signal chart list item condition
- SignalChartListItem.Timer - Class in nxopen.motion
-
time sensor
- SignalChartListItemList - Interface in nxopen.motion
-
Represents a list of objects.
- signalCharts() - Method in interface nxopen.motion.MotionManager
-
- signalChartType() - Method in interface nxopen.motion.SignalChartBuilder
-
Returns the SignalChart type
License requirements: nx_motion_motor ("NX Motion Motor")
.
- SignalCollection - Interface in nxopen.mechatronics
-
Represents a collection of Signal.
- SignalConnection - Interface in nxopen.mechatronics
-
Represents the Signal connection class.
- SignalConnectionBuilder - Interface in nxopen.mechatronics
-
- SignalConnectionBuilder.DataType - Class in nxopen.mechatronics
-
Represents the OPC signal data type.
- SignalConnectionBuilderList - Interface in nxopen.mechatronics
-
Represents a list of objects.
- SignalConnectionCollection - Interface in nxopen.mechatronics
-
Represents a collection of Signal Connection.
- signalConnectionList() - Method in interface nxopen.mechatronics.SignalMappingBuilder
-
Returns the signal connection builder list
License requirements: None.
- signalConnections() - Method in interface nxopen.mechatronics.PhysicsManager
-
- SignalData() - Constructor for class nxopen.mechatronics.MATLABClientBuilder.SignalData
-
- SignalData(String, String, String) - Constructor for class nxopen.mechatronics.MATLABClientBuilder.SignalData
-
Constructor for the SignalData object.
- SignalData() - Constructor for class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
- SignalData(String, SignalAdapterBuilder.DataType, SignalAdapterBuilder.DataPortType, boolean, int, double, Unit, int, AdapterSignal, AdapterFormula, String, String) - Constructor for class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Constructor for the SignalData object.
- signalDataType() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
Returns the data type of signal.
- signalExpression() - Method in interface nxopen.motion.SignalChartListItem
-
Returns the threshold expression
License requirements: nx_motion_motor ("NX Motion Motor")
.
- signalId - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Signal Id
- signalIdentify() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
Returns the signal object.
- SignalInfo() - Constructor for class nxopen.mechatronics.SHMSignalProviderBuilder.SignalInfo
-
- SignalInfo(NXObject, boolean, String) - Constructor for class nxopen.mechatronics.SHMSignalProviderBuilder.SignalInfo
-
Constructor for the SignalInfo object.
- SignalMappingBuilder - Interface in nxopen.mechatronics
-
- SignalMappingBuilder.AppOption - Class in nxopen.mechatronics
-
the application option
- SignalMappingConnection - Interface in nxopen.mechatronics
-
Represents the Signal Mapping Connection class.
- SignalMappingConnectionBuilder - Interface in nxopen.mechatronics
-
- SignalMappingConnectionBuilderList - Interface in nxopen.mechatronics
-
Represents a list of objects.
- SignalMappingConnectionCollection - Interface in nxopen.mechatronics
-
Represents a collection of Signal Connection.
- signalMappingConnections() - Method in interface nxopen.mechatronics.PhysicsManager
-
- signalName() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
Returns the name of signal.
- signalname - Variable in class nxopen.mechatronics.MATLABClientBuilder.AvailableItemsData
-
- signalName - Variable in class nxopen.mechatronics.MATLABClientBuilder.TagAttribute
-
item Name
- signalName - Variable in class nxopen.mechatronics.SHMSignalClientBuilder.SHMSignal
-
Signal Name
- signalObject() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the signal use to evaluate this condition for the selected property in condition object.
- signalObject() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
Returns the signal object.
- signalportType - Variable in class nxopen.mechatronics.MATLABClientBuilder.TagAttribute
-
Port Type
- SignalProcessingDBSettings - Interface in nxopen.cae
-
This is the class handling the dB settings option: a dB reference value and a dB format
(10 or 20).
- SignalProcessingDBSettings.DBFormats - Class in nxopen.cae
-
This enum defines the dB formats
- SignalProcessingPlotData - Interface in nxopen.cae
-
Exposes the ability to change the Spectrum scaling, correction mode and acoustical
weighting applied on a curve displayed in a XY plot.
- SignalProcessingPlotData.AcousticalWeighting - Class in nxopen.cae
-
This enum defines the acoustical weightings
- SignalProcessingPlotData.CorrectionMode - Class in nxopen.cae
-
This enum defines the correction modes
- SignalProcessingPlotData.ScalingType - Class in nxopen.cae
-
This enum defines the spectrum scaling
- signals() - Method in interface nxopen.mechatronics.PhysicsManager
-
- signals - Variable in class nxopen.mechatronics.TCPClientBuilder.ConnectionInformationData
-
Array of Signal
- signals - Variable in class nxopen.mechatronics.TCPSignalServerBuilder.ConnectionInformationData
-
Array of Signal
- signals - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.ConnectionInformationData
-
Array of Signal
- signals - Variable in class nxopen.mechatronics.UDPSignalServerBuilder.ConnectionInformationData
-
Array of Signal
- signalTag - Variable in class nxopen.mechatronics.SHMSignalProviderBuilder.SignalInfo
-
Signal Object
- signalTag() - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
Returns the signal object.
- signalTag - Variable in class nxopen.mechatronics.TCPSignalServerBuilder.Signal
-
Signal Object
- signalTag - Variable in class nxopen.mechatronics.UDPSignalServerBuilder.Signal
-
Signal Object
- signaltype - Variable in class nxopen.mechatronics.MATLABClientBuilder.AvailableItemsData
-
- signalType - Variable in class nxopen.mechatronics.MATLABClientBuilder.TagAttribute
-
Data Type
- SIGNED_AMPLITUDE - Static variable in class nxopen.cae.PreTestSolutionBuilder.ModeConversionType
-
No triax sensors required
- SIGNED_AMPLITUDE - Static variable in class nxopen.cae.Result.Complex
-
- SIGNED_MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Signed magnitude for 2D plot
- SIGNED_MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption2DBarChart
-
Signed magnitude for 2D bar chart plot
- SIGNED_MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption2DColorContour
-
Signed magnitude for 2D color contour plot plot
- SIGNED_MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption3D
-
Signed magnitude for 3D plot
- signedVonMisesStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the signedVonMisesStress.
- significantPlaces() - Method in interface nxopen.cae.PostAnnotationPreference
-
Returns the result navigator significant places
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- significantPlaces() - Method in interface nxopen.cae.PostIdentifyPreference
-
Returns the result navigator significant places
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- significantPlaces() - Method in interface nxopen.cae.PostLegendPreference
-
Returns the result navigator significant places
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- significantPlaces() - Method in interface nxopen.cae.PostResultNavigatorPreference
-
Returns the result navigator significant places
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- silhChordTolerance - Variable in class nxopen.uf.UFFacet.Parameters
-
- silhouDisplay() - Method in interface nxopen.cam.MethodBuilder
-
Returns the sub builder for silhou display
License requirements: None.
- silhouDisplay() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the sub builder for silhou display
License requirements: None.
- SILHOUETTE - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes
-
Path Display: Silhouette
- SILHOUETTE - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes
-
Path Display: Silhouette
- SILHOUETTE_CURVE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Specifies Silhouette Curve
- SILHOUETTE_CURVE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType
-
- SILHOUETTE_FILL - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes
-
Path Display: Silhouette Fill
- SILHOUETTE_FILL - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes
-
Path Display: Silhouette Fill
- silhouetteChordTolerance - Variable in class nxopen.facet.FacetingParameters
-
If specifyViewDirection is specified
then this is the tolerance which will be
used as a tighter surface tolerance
in the silhouette area specified
by the view direction (this does not apply to JT).
- SilhouetteFlange - Interface in nxopen.features
-
Represents a silhouette flange feature
To create or edit an instance of this class, use
SilhouetteFlangeBuilder
Created in NX6.0.0
- SilhouetteFlangeBuilder - Interface in nxopen.features
-
- SilhouetteFlangeBuilder.OutputSurfaceOptions - Class in nxopen.features
-
Output surface options
- SilhouetteFlangeBuilder.ReferenceDirectionOptions - Class in nxopen.features
-
Reference direction options
- SilhouetteFlangeBuilder.Types - Class in nxopen.features
-
Silhouette flange creation types
- silhouetteMode - Variable in class nxopen.uf.UFView.EdgeDisplayOptions
-
- silhouetteMode - Variable in class nxopen.uf.UFView.Visualization
-
- silhouettes() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the status of silhouettes curves, if true silhouettes for
selected drawing member views added else silhouettes removed
from the selected member views.
- silhouettes() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the silhouettes
License requirements: None.
- silhouettes() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the silhouettes toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- silhouettes() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of silhouettes curves, if true silhouettes for
selected drawing member views are added else silhouettes are removed
from the selected member views.
- silhouettes - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
Allows to control whether the silhouettes
(or outlines) on cones, cylinders, spheres,
and Tori solid bodies display.
- silhouettes - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions
-
Deprecated.
Allows to control whether the silhouettes
(or outlines) on cones, cylinders, spheres,
and Tori solid bodies display.
- silhouettes - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref
-
Deprecated.
Allows to control whether the silhouettes
(or outlines) on cones, cylinders, spheres,
and Tori solid bodies display.
- silhouettes - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- SILHOUETTES_OFF - Static variable in class nxopen.uf.UFDraw.Silhouette
-
- SILHOUETTES_ON - Static variable in class nxopen.uf.UFDraw.Silhouette
-
- silhouetteTags - Variable in class nxopen.uf.UFDraw.AskBodySilsInViewData
-
- silhouetteViewDirection - Variable in class nxopen.facet.FacetingParameters
-
If specifyViewDirection is specified,
then this is the view direction to use
(this does not apply to JT).
- SILHOUTTE - Static variable in class nxopen.cam.CutParametersTrimControlTypes
-
silhoutte type
- silhViewDirection - Variable in class nxopen.uf.UFFacet.Parameters
-
- silTags - Variable in class nxopen.uf.UFDraw.AskFaceSilsInViewData
-
- SILVER_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- SIM - Static variable in class nxopen.pdm.CaeCloneManager.CloneOption
-
Deprecated.
- sim() - Method in interface nxopen.UFSession
-
- SIM_MANAGER - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump SimManager
- SIM_PART_NEW_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- SIM_PART_OPEN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- SIM_REQT - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- SIM_SAVEAS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- SIM_SUMMARY_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- SIM_TYPE - Static variable in class nxopen.tooling.ToolingCloneparttype
-
CAE .sim part
- SimAutoBcRecipe - Interface in nxopen.cae
-
- SimBC - Interface in nxopen.cae
-
- SimBCBuilder - Interface in nxopen.cae
-
This is a manager to the
SimBC
class.
- SimBCDisplay - Interface in nxopen.cae
-
Represents a BC display attributes
.
- SimBCDisplay.DisplayGridData - Class in nxopen.cae
-
- SimBCDisplay.Mode - Class in nxopen.cae
-
Used to specify the display mode for the BC
- SimBcGroup - Interface in nxopen.cae
-
Represents a BC group in a solution or solution step
This is an abstract class.
- SimBcPlotContoursBuilder - Interface in nxopen.cae
-
- SimBcPlotContoursBuilder.AvailablePropertyNamesAndIndicesToPlotData - Class in nxopen.cae
-
- SimBcPlotContoursBuilder.PlotType - Class in nxopen.cae
-
Plot types
- SimBcPlotContoursBuilder.ResolveOverlapType - Class in nxopen.cae
-
Resolve overlap types
- SimBcXyPlotBuilder - Interface in nxopen.cae
-
- SimBcXyPlotBuilder.ResolveMultipleMatches - Class in nxopen.cae
-
Resolve multiple matches when the location specified matches multiple items in the boundary condition's target set
- SIMCENTER - Static variable in class nxopen.motion.MotionEnvironment.Solver
-
Simcenter Motion solver
- SimCondition - Interface in nxopen.cae
-
This class represents a Condition which defines a state where all or some values of
SimConditionParam
are known.
- SimConditionCollection - Interface in nxopen.cae
-
- SimConditionParam - Interface in nxopen.cae
-
This class represents a named measurable quantity.
- SimConditionParamCollection - Interface in nxopen.cae
-
This class is a collection of
SimConditionParam
which
represents a measurable environment.
- SimConditionSeqMgr - Interface in nxopen.cae
-
This is the manager for Condition Sequences.
- SimConditionSeqMgr.FileFormat - Class in nxopen.cae
-
Specifies the file format during an import.
- SimConditionSeqMgr.ImportMissingConditionsBehavior - Class in nxopen.cae
-
Specifies the missing conditions behavior during an import.
- SimConditionSeqMgr.ImportNameCollisionsBehavior - Class in nxopen.cae
-
Specifies the name collision behavior during an import.
- SimConditionSequence - Interface in nxopen.cae
-
- SimConditionSequence.OutOfRangeBehavior - Class in nxopen.cae
-
- SimConditionSequenceCollection - Interface in nxopen.cae
-
- SimConditionTimeStep - Interface in nxopen.cae
-
- SimConditionTimeStepCollection - Interface in nxopen.cae
-
- SimConstraint - Interface in nxopen.cae
-
- SimConstraintCollection - Interface in nxopen.cae
-
Provides methods for managing constraints
SimConstraint
in a sim part
To obtain an instance of this class, refer to
SimSimulation
Created in NX4.0.0
- SimConstraintGroup - Interface in nxopen.cae
-
Represents a constraint group in a solution or solution step
Not support KF.
- SimConstraintSet - Interface in nxopen.cae
-
- SimConstraintSetBuilder - Interface in nxopen.cae
-
- SimConstraintSetCollection - Interface in nxopen.cae
-
- simDebugBuilder() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Returns the sim debug builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- SimDebugBuilder - Interface in nxopen.sim
-
- SimDebugBuilder.DriverType - Class in nxopen.sim
-
Represents the driver type
- SimDebugBuilder.DumpType - Class in nxopen.sim
-
Represents the dump type
- SimDebugBuilder.KinematicModelType - Class in nxopen.sim
-
Represents the kinematic model type
- SimDebugBuilder.OutputType - Class in nxopen.sim
-
The output type
- SimDebugBuilder.PrintoutTagsOrPointersType - Class in nxopen.sim
-
Represents the printout tags or pointers type
- SimDebugBuilder.TraceType - Class in nxopen.sim
-
Represents the trace type
- SimDebugBuilder.UiType - Class in nxopen.sim
-
Represents the ui type
- simEndCb() - Method in interface nxopen.sim.IsvControlPanelBuilder.SimEndCb
-
Prototype for SimEnd callbacks
License requirements: None.
- SimGroupContainer - Interface in nxopen.cae
-
Represents UGS::CaeSim::LbcGroupContainer
This is an abstract class
.
- SIMILAR - Static variable in class nxopen.shapesearch.ShapeSearchBuilder.ShapeSimilarity
-
search with similar condition
- SIMIT - Static variable in class nxopen.mechatronics.PreferencesBuilder.MasterTypes
-
SIMIT
- simitFolder() - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder
-
Returns the simit folder name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- simitTemplate() - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilder
-
Returns the simit template name
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- SimLbcFolder - Interface in nxopen.cae
-
- SimLbcFolder.Type - Class in nxopen.cae
-
Defines type of Lbc Folder
- SimLbcFolderCollection - Interface in nxopen.cae
-
Provides methods for managing LbcFolders
SimLbcFolder
in a sim part
To obtain an instance of this class, refer to
SimSimulation
Created in NX9.0.0
- SimLoad - Interface in nxopen.cae
-
- SimLoadCollection - Interface in nxopen.cae
-
Provides methods for managing loads
SimLoad
in a sim part
To obtain an instance of this class, refer to
SimSimulation
Created in NX4.0.0
- SimLoadGroup - Interface in nxopen.cae
-
Represents a load group in a solution or solution step
Not support KF.
- SimLoadRecipe - Interface in nxopen.cae
-
This is the class handling the attributes of a load recipe.
- SimLoadRecipe.ImportFromCSVFileData - Class in nxopen.cae
-
- SimLoadRecipeCollection - Interface in nxopen.cae
-
- SimLoadRecipeFunctionAttributes - Interface in nxopen.cae
-
This is the class handling the default attributes of a source used by a load recipe.
- SimLoadRecipeFunctionAttributes.AcousticalWeightings - Class in nxopen.cae
-
This enum defines the acoustical weightings
- SimLoadRecipeFunctionAttributes.CorrectionModes - Class in nxopen.cae
-
This enum defines the correction modes
- SimLoadRecipeFunctionAttributes.ScalingType - Class in nxopen.cae
-
This enum defines the spectrum scaling
- SimLoadRecipeLbcGenerator - Interface in nxopen.cae
-
Handles generation of subcases and loads based on a
SimLoadRecipe
.
- SimLoadRecipeLbcGenerator.LbcHierarchyTypes - Class in nxopen.cae
-
- SimLoadRecipeMapEntry - Interface in nxopen.cae
-
- SimLoadRecipeMapEntryCollection - Interface in nxopen.cae
-
- SimLoadRecipeMapEntryTargetTypes - Interface in nxopen.cae
-
The class handles the enum definitions needed by load recipe map entries
No Creator this holds an enum shared by other classes
.
- SimLoadRecipeMapEntryTargetTypes.TargetTypes - Class in nxopen.cae
-
- SimLoadRecipeMapping - Interface in nxopen.cae
-
This is the class handling the mapping of a certain load type of a load recipe.
- SimLoadRecipeMapping.OrientationTypes - Class in nxopen.cae
-
How the orientation of loads is mapped
- SimLoadRecipeMappingCollection - Interface in nxopen.cae
-
- SimLoadRecipeSource - Interface in nxopen.cae
-
This is the class handling the attributes of a source used by a load recipe.
- SimLoadRecipeSourceCollection - Interface in nxopen.cae
-
- SimLoadRecipeTypes - Interface in nxopen.cae
-
The class handles the enum definitions needed by load recipes
No Creator this holds an enum shared by other classes
.
- SimLoadRecipeTypes.DataTypes - Class in nxopen.cae
-
This enum defines the Data Type options
- SimLoadRecipeTypes.LoadConditionHandling - Class in nxopen.cae
-
This enum defines the types of Data Source handling
- SimLoadSet - Interface in nxopen.cae
-
- SimLoadSet.Type - Class in nxopen.cae
-
Load Set type
- SimLoadSetBuilder - Interface in nxopen.cae
-
- SimLoadSetCollection - Interface in nxopen.cae
-
Provides methods for managing
SimLoadSet
in a sim part
To obtain an instance of this class, refer to
SimSimulation
Created in NX10.0.0
- SimMotionLoadsBuilder - Interface in nxopen.cae
-
- SimMotionLoadsListItemBuilder - Interface in nxopen.cae
-
- SIMP - Static variable in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.MaterialInterpolation
-
Solid Isotropic material with penalization
- SimPart - Interface in nxopen.cae
-
Represents an NX part of type .sim.
- SimPart.ImportErrorCodes - Class in nxopen.cae
-
Contains list of error codes for import of each entity type
- SimPart.ImportOptions - Class in nxopen.cae
-
Contains information about which entities to be imported
- SimplData() - Constructor for class nxopen.uf.UFModl.SimplData
-
- SimplData(int, Tag[], int, Tag[], int, Tag[], int, Tag[], int, Tag[], int, Tag[], Tag) - Constructor for class nxopen.uf.UFModl.SimplData
-
- SIMPLE - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Section consists of trim ledge, punch radius, and second stretch wall segments.
- SIMPLE - Static variable in class nxopen.display.SelPref.Method
-
chaining method simple
- SIMPLE - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Simple
- SIMPLE - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
- SIMPLE - Static variable in class nxopen.features.AeroFlangeBuilder.ThicknessDimensionOptions
-
- SIMPLE - Static variable in class nxopen.features.AeroFlangeBuilder.WidthDimensionOptions
-
- SIMPLE - Static variable in class nxopen.features.AeroRibBuilder.HeightDimensionOptions
-
- SIMPLE - Static variable in class nxopen.features.AeroRibBuilder.ThicknessDimensionOptions
-
- SIMPLE - Static variable in class nxopen.features.Hole.Subtype
-
Simple hole
- SIMPLE - Static variable in class nxopen.features.HoleFeatureBuilder.HoleSubtype
-
Simple hole
- SIMPLE - Static variable in class nxopen.features.HolePackageBuilder.HoleForms
-
Simple hole form
- SIMPLE - Static variable in class nxopen.features.PatternFeatureBuilder.PatternMethodOptions
-
simple
- SIMPLE - Static variable in class nxopen.features.SpineCurveBuilder.ArcSegmentsTypes
-
- SIMPLE - Static variable in class nxopen.features.ThroughCurveMeshBuilder.ConstructionMethod
-
Build the simplest curve mesh surface possible.
- SIMPLE - Static variable in class nxopen.features.ThroughCurvesBuilder.ConstructionMethod
-
Build the simplest mesh surface possible.
- SIMPLE - Static variable in class nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilder.ValidateTypes
-
Simple type
- SIMPLE - Static variable in class nxopen.geometricutilities.StartHoleData.HoleForms
-
Simple hole form
- SIMPLE - Static variable in class nxopen.mechatronics.GanttOperationBuilder.OperationType
-
Simple operation
- SIMPLE - Static variable in class nxopen.mechatronics.GanttOperationBuilder.SimpleOperationType
-
- SIMPLE - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.SurfType
-
- simple(String) - Method in interface nxopen.pdm.PdmSearch
-
Perform simple search in the teamcenter and returns the result vector.
- SIMPLE - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Simple
- SIMPLE - Static variable in class nxopen.routing.AssignDiscontinuityBuilder.Types
-
- SIMPLE - Static variable in class nxopen.routing.StockStyle
-
Simple profile.
- SIMPLE - Static variable in class nxopen.visualreporting.Classifier.TypeOption
-
Simple classifier type
- SIMPLE_CURVES - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption
-
simple curves
- SIMPLE_FROM_PROFILE - Static variable in class nxopen.ExtrudeTaperDataTaperType
-
Simple taper from profile
- SIMPLE_FROM_PROFILE - Static variable in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType
-
Draft using the profile as the reference
- SIMPLE_FROM_START - Static variable in class nxopen.ExtrudeTaperDataTaperType
-
Simple taper from start edges
- SIMPLE_FROM_START - Static variable in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType
-
Draft using the start limit as the reference
- SIMPLE_HOLE - Static variable in class nxopen.uf.UFModl.HoleType
-
- SIMPLE_OR_STEPPED - Static variable in class nxopen.drawings.SectionLineBuilder.Types
-
Deprecated.
- SIMPLE_SECTION - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.SectionRuleOptions
-
- SIMPLE_SOLID - Static variable in class nxopen.routing.StockBuilder.StockStyleType
-
Simple Solid
- SIMPLE_SOLID - Static variable in class nxopen.routing.StockStyleBuilder.StockStyle
-
- SIMPLE_STEPPED - Static variable in class nxopen.drawings.SectionViewBuilder.SectionLineType
-
- SIMPLE_STEPPED - Static variable in class nxopen.drawings.SketchSectionLineBuilder.SectionLineTypes
-
- SIMPLE_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType
-
- simpleConstruction() - Method in interface nxopen.features.MeshSurfaceBuilder
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- SimpleDraft - Interface in nxopen.geometricutilities
-
Represents an Offset .
- SimpleDraft.SimpleDraftType - Class in nxopen.geometricutilities
-
This enum represents the kind of simple_draft
- SimpleDraftingAid - Interface in nxopen.annotations
-
Represents a simple drafting aid.
- SimpleDraftingAid.UserSymbolSizeData - Class in nxopen.annotations
-
- SimpleDraftingAidPreferences - Interface in nxopen.annotations
-
Represents simple drafting aid preferences .
- simpleGap - Variable in class nxopen.uf.UFModl.SmcornerData
-
- SimpleHoleData() - Constructor for class nxopen.features.Hole.SimpleHoleData
-
- SimpleInterference - Interface in nxopen.geometricanalysis
-
Represents the Simple Interference object.
- SimpleInterference.FaceInterferenceMethod - Class in nxopen.geometricanalysis
-
Specifies to "find only first pair of interfering faces" or "all
pairs of interfering faces" between the input boides.
- SimpleInterference.InterferenceMethod - Class in nxopen.geometricanalysis
-
Specifies interference method, i.e., to highlight interfering
faces or create interference solid
- SimpleInterference.Result - Class in nxopen.geometricanalysis
-
Specifies the result of a simple interference check
- simpleOrStepped() - Method in interface nxopen.drawings.SectionLineBuilder
-
- simplePoint() - Method in interface nxopen.routing.AssignDiscontinuityBuilder
-
Returns the Rcp type of the selected object
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- simpleText - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- SIMPLIFIED - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepDisplayStyle
-
Display simplified graphic defined by superelement file
- SIMPLIFIED - Static variable in class nxopen.cae.Result.SuperElementRep
-
- SIMPLIFIED_CURVE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Specifies Simplified Curve
- SIMPLIFIED_CURVE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType
-
- simplifiedBoundaryToggle() - Method in interface nxopen.geometricutilities.PatternFill
-
Returns the simplifiedBoundaryToggle, a logical flag to indicate a special case for Linear, Circular, Spiral, or Polygon.
- simplifiedLayoutType() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the simplified layout type to be used by the pattern
License requirements: None.
- SIMPLIFY - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Features
-
- SIMPLIFY - Static variable in class nxopen.features.ReplaceFaceBuilder.ReplaceTypes
-
This stands for simplify type - to simplify the geometry representation of a surface of a face
- simplify() - Method in interface nxopen.ListCreator
-
Returns the m_simplify * - Specifies the simplification tolerance for Defined Level of Detail
License requirements: None.
- SIMPLIFY - Static variable in class nxopen.preferences.HiddenLineSmallFeatureOption
-
Simplify
- SIMPLIFY_PATH - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Simplify Path command.
- SIMPLIFY_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- simplifyCurveOption() - Method in interface nxopen.SketchEvaluator
-
Returns the option which allows the automatic conversion of curves
into an approximation of sorted sequence of arcs and lines.
- simplifyFacesandEdges() - Method in interface nxopen.Catiav5Importer
-
Returns the simplify faces and edges - This option allows you to simplify nearly analytical faces and edges to analytics
License requirements: None.
- simplifyGeometry() - Method in interface nxopen.AcisImporter
-
Returns the simplify geometry - if value set to true then imported data will be simplified
License requirements: None.
- simplifyGeometry() - Method in interface nxopen.Catiav4Importer
-
Returns the simplify Geometry - if set to true then imported data will be simplified
License requirements: None.
- simplifyGeometry() - Method in interface nxopen.DxfdwgImporter
-
Returns the SimplifyGeometry command - if set to true then attempt will be made to simplify 3D geometry to analytics
License requirements: None.
- simplifyGeometry() - Method in interface nxopen.IgesImporter
-
Returns the simplify geometry - set this to true if automatic simplification of geometry is desired
License requirements: None.
- simplifyGeometry() - Method in interface nxopen.ProeImporter
-
Returns the simplify geometry - if value set to true then imported data will be simplified
License requirements: None.
- simplifyGeometry() - Method in interface nxopen.Step203Importer
-
Returns the simplify geometry - if set to true geometry will be simplified automatically
License requirements: None.
- simplifyGeometry() - Method in interface nxopen.Step214Importer
-
Returns the simplify geometry - if set to true geometry will be simplified automatically
License requirements: None.
- simplifyGeometry() - Method in interface nxopen.Step242Importer
-
Returns the simplify geometry - if set to true geometry will be simplified automatically
License requirements: None.
- simplifyPath() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
Returns the setting to determine whether to simplify the path by removing collinear extension Routing Control Points.
- simplifyPath() - Method in interface nxopen.mechanicalrouting.MergeBuilder
-
Returns the simplify path setting
License requirements: routing_base ("Routing Basic")
.
- SimplifyPathBuilder - Interface in nxopen.routing
-
- simplifyRcps(int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- simplifySegments(ISegment[], boolean) - Method in interface nxopen.routing.SegmentManager
-
Combine segments that are collinear and whose intermediate RCPs do not branch
License requirements: routing_base ("Routing Basic")
.
- simplifySegments(int, Tag[]) - Method in interface nxopen.uf.UFRoute
-
- SimplifySegmentsData() - Constructor for class nxopen.uf.UFRoute.SimplifySegmentsData
-
- simplifyShapes() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Simplify Shapes Method
License requirements: None.
- simplifySmallFeatures - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- SIMPLY_SUPPORTED - Static variable in class nxopen.cae.aerostructures.author.ABB.EdgeSupportType
-
Simply supported
- SIMPLY_SUPPORTED_CLAMPED - Static variable in class nxopen.cae.aerostructures.author.ABB.UnloadedEdgeSupportType
-
Simply Supported-Clamped
- SIMPLY_SUPPORTED_SIMPLY_SUPPORTED - Static variable in class nxopen.cae.aerostructures.author.ABB.UnloadedEdgeSupportType
-
Simply Supported-Simply Supported
- simplyEdges() - Method in interface nxopen.features.DeleteEdgeBuilder
-
Returns the edges to be deleted
License requirements: None.
- SimRecipe - Interface in nxopen.cae
-
This is an abstract class.
- SimRecipeCollection - Interface in nxopen.cae
-
Provides methods for managing
SimRecipe
in a sim part
To obtain an instance of this class, refer to
SimSimulation
Created in NX5.0.0
- SimResultReference - Interface in nxopen.cae
-
Represents a Result Reference in the .sim files.
- SimResultReference.ResultFileData - Class in nxopen.cae
-
- SimResultReference.Type - Class in nxopen.cae
-
Result Types
- SimSimulation - Interface in nxopen.cae
-
This is the root object in a .sim file.
- SimSimulation.AxisymAbstractionType - Class in nxopen.cae
-
Used to specify the axisymmetric abstraction type during solution creation.
- SimSimulationObject - Interface in nxopen.cae
-
Represents a simulation object.
- SimSimulationObjectCollection - Interface in nxopen.cae
-
Provides methods for managing simulation objects
SimSimulationObject
in a sim part
To obtain an instance of this class, refer to
SimSimulation
Created in NX4.0.0
- SimSimulationObjectGroup - Interface in nxopen.cae
-
Represents a simulation object group in a solution or solution step
Not support KF.
- SimSolution - Interface in nxopen.cae
-
Represents a solution in the .sim files.
- SimSolution.ConflictingBcPairByIndexData - Class in nxopen.cae
-
- SimSolution.ConflictingConstraintPairByIndexData - Class in nxopen.cae
-
- SimSolution.ResultFileData - Class in nxopen.cae
-
- SimSolution.SetupCheckOption - Class in nxopen.cae
-
Model Setup Check Options
- SimSolution.SolveMode - Class in nxopen.cae
-
Run Mode Options
- SimSolution.SolveOption - Class in nxopen.cae
-
Solve Options
- SimSolution.StepPosition - Class in nxopen.cae
-
Step creation options
- SimSolutionCollection - Interface in nxopen.cae
-
- SimSolutionStep - Interface in nxopen.cae
-
Represents a subcase/step in a solution.
- SimSolveManager - Interface in nxopen.cae
-
Represents a
SimSolveManager
manager which is used to manage the solve process of solutions.
- SimSolveManager.ChainOfPrerequisitesData - Class in nxopen.cae
-
- SimSolveManager.SolveAllMetaSolutionsData - Class in nxopen.cae
-
- SimSolveManager.SolveAllSolutionsData - Class in nxopen.cae
-
- SimSolveManager.SolveChainOfSolutionsData - Class in nxopen.cae
-
- SimSolveManagerFactory - Class in nxopen.cae
-
- SimSolveManagerFactory() - Constructor for class nxopen.cae.SimSolveManagerFactory
-
- simStopCb() - Method in interface nxopen.sim.IsvControlPanelBuilder.SimStopCb
-
Prototype for SimStop callbacks
License requirements: None.
- SIMULATE - Static variable in class nxopen.cam.SimulationOptionsBuilder.DialogType
-
simulate
- SIMULATED - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.OutputOptionTypes
-
Output Option: Simulated
- SIMULATED_ANNEALING - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationAlgorithmType
-
Simulated annealing
- SIMULATED_HORIZON - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Simulated horizon.
- simulation() - Method in interface nxopen.cae.SimPart
-
Returns the
SimSimulation
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- SIMULATION - Static variable in class nxopen.sim.SimDebugBuilder.KinematicModelType
-
Simulation Kinematic Model
- SIMULATION_OBJECT - Static variable in class nxopen.cae.LbcAssociationMgr.BcType
-
Associate simulation objects
- SIMULATION_OBJECT - Static variable in class nxopen.cae.SimLbcFolder.Type
-
Simulation object type folder
- SIMULATION_SETTINGS - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Simulation Settings
- simulationAskFem(Tag) - Method in interface nxopen.uf.UFSf
-
- simulationDisplay() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the option to control the display update.
- simulationJobPath() - Method in interface nxopen.presslinesimulation.ConvertFromDieValidationBuilder
-
Returns the simulation job path
License requirements: None.
- simulationLoadSnapshotBuilder() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Returns the load snapshot builder
License requirements: None.
- simulationObjects() - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
Returns the simulation objects
License requirements: None.
- simulationObjects() - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
Returns the simulation objects
License requirements: None.
- simulationObjects() - Method in interface nxopen.cae.SimSimulation
-
Returns the simulation object collection belonging to this sim part .
- SimulationOptionsBuilder - Interface in nxopen.cam
-
- simulationOptionsBuilder() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Returns the simulation options builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- SimulationOptionsBuilder.Accuracy - Class in nxopen.cam
-
The ipw animation accuracy options
- SimulationOptionsBuilder.DialogType - Class in nxopen.cam
-
the dialog type
- SimulationOptionsBuilder.Enable - Class in nxopen.cam
-
the enable value
- SimulationOptionsBuilder.IpwEnable - Class in nxopen.cam
-
the ipw mode value
- SimulationOptionsBuilder.Resolution - Class in nxopen.cam
-
The ipw resolution options
- SimulationOptionsBuilder.SimulationDisplayMode - Class in nxopen.cam
-
The modes of the simulation display
- SimulationOptionsBuilder.Stationary - Class in nxopen.cam
-
The stationary options
- SimulationOptionsBuilder.StockType - Class in nxopen.cam
-
Gouge Check Stock options
- SimulationOptionsBuilder.ToolShapeColl - Class in nxopen.cam
-
The tool shape for checking options
- SimulationOptionsBuilder.ToolShapeMR - Class in nxopen.cam
-
The tool shape for material removal options
- simulationRecipes() - Method in interface nxopen.cae.SimSimulation
-
Returns the simulation recipe collection belonging to this sim part .
- simulationSaveSnapshotBuilder() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Returns the save snapshot builder
License requirements: None.
- SIMULAYT_LAYUP - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
-
Simulayt Layup File.
- SIMULINK_MDIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- SIMULINK_MDL_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- SIMULINK_MDL_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- SIMULINK_MFLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- SINGLE - Static variable in class nxopen.cae.SimLoadRecipeTypes.LoadConditionHandling
-
Treat all sources as a single load condition
- SINGLE - Static variable in class nxopen.cam.CutLevel.RangeTypes
-
Single
- SINGLE - Static variable in class nxopen.cam.FlowBuilder.FlowOffsetModeType
-
Single Pass
- SINGLE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.RegionMachiningTypes
-
Region Machining type: Single
- SINGLE - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimPathType
-
- SINGLE - Static variable in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes
-
single backburn pass
- SINGLE - Static variable in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes
-
single backburn pass
- SINGLE - Static variable in class nxopen.CGMBuilder.MultipleOption
-
Save Multiple sheets as one CGM
- SINGLE - Static variable in class nxopen.features.IsoclineCurveBuilder.CurveTypes
-
- SINGLE - Static variable in class nxopen.features.sheetmetal.GussetBuilder.PlacementTypes
-
One Gusset will be created at an offset from an edge on the selected bend face.
- SINGLE - Static variable in class nxopen.features.sheetmetal.JoggleBuilder.LimitTypes
-
- SINGLE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.RequestType
-
- SINGLE - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.SectionsPerDrawingOptions
-
- SINGLE - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.OffsetSpacingModes
-
- SINGLE - Static variable in class nxopen.features.ThroughCurvesBuilder.PatchTypes
-
single patch.
- SINGLE - Static variable in class nxopen.geometricutilities.MultiDraft.AngleOption
-
Sigle draft
- SINGLE - Static variable in class nxopen.mechatronics.HydraulicCylinderBuilder.OutputRodType
-
single rod
- SINGLE - Static variable in class nxopen.mechatronics.PneumaticCylinderBuilder.OutputRodType
-
single rod
- single - Variable in class nxopen.uf.UFCgm.CustomWidths
-
- Single() - Constructor for class nxopen.uf.UFCutLevels.Single
-
- Single(Tag, double, double) - Constructor for class nxopen.uf.UFCutLevels.Single
-
- SINGLE - Static variable in class nxopen.weld.WeldPointMethod
-
use point constructor to generate spot weld points
- single() - Method in interface nxopen.WidthDefinition
-
Returns the single width type selection
License requirements: None.
- SINGLE_CHAIN - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification
-
Preview single chain when using "Select Faces by Chain" and "Single Selection" to select input objects.
- SINGLE_CHAIN_IN_GROUP - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.ReducedFaceTypeSpecification
-
Preview single item in face group list when using "Select Faces by Radius" to select input objects.
- SINGLE_COMPONENT - Static variable in class nxopen.assemblies.ComponentAssembly.SubstitutionMode
-
An associative substitution is performed.
- SINGLE_DESELECTION - Static variable in class nxopen.Selection.UistylerSelectionType
-
single deselect
- SINGLE_DIE - Static variable in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt
-
single die type
- SINGLE_DIMENSION - Static variable in class nxopen.annotations.BaseOrdinateDimensionBuilder.Types
-
singular dimension
- SINGLE_DIRECTION - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes
-
Cut regions type: Single Direction
- SINGLE_DRAW - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.DrawType
-
For draw die, punch and binder are lower than die.
- SINGLE_ELEMENT - Static variable in class nxopen.cae.ElementConnectivityBuilder.Types
-
Modify connectivity of selected element.
- SINGLE_FACE - Static variable in class nxopen.features.ExtractFaceBuilder.FaceOptionType
-
single face type
- SINGLE_FEATURE - Static variable in class nxopen.features.PatchOpeningsBuilder.OutputTypes
-
Output one feature containing all patch sheet bodies
- SINGLE_FLANGE - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- SINGLE_FLANGE - Static variable in class nxopen.annotations.Symbol
-
Specifiies single flange weld symbol (JIS only)
- SINGLE_FRAME - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfFrameStyle
-
single frame
- SINGLE_FRAME - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions
-
single frame
- SINGLE_LAST_FINISH - Static variable in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes
-
single backburn pass - last finish
- SINGLE_LAST_FINISH - Static variable in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes
-
single backburn pass - last finish
- SINGLE_LINE - Static variable in class nxopen.annotations.FitAssemblyDisplayStyle
-
Deprecated.
Display single line
- SINGLE_LINE - Static variable in class nxopen.annotations.FitAssemblyNewDisplayStyle
-
Display single line
- SINGLE_LINE_DIAGRAM - Static variable in class nxopen.ame.DocumentType
-
- SINGLE_LINE_FRACTION - Static variable in class nxopen.drawings.ScaleValueFormatTypes
-
- SINGLE_LINE_SCHEMATIC - Static variable in class nxopen.ame.Manage2dSymbolsBuilder.SymbolRepresentationTypes
-
- SINGLE_LINE_SCHEMATICS - Static variable in class nxopen.ame.PageBuilder.Types
-
- SINGLE_LOCATION - Static variable in class nxopen.formboard.ObjectAttributeReferenceBuilder.LeaderType
-
Single leader for the annotation of selected object.
- SINGLE_MODE - Static variable in class nxopen.ame.AmeOpticalConnectionFiberType
-
- SINGLE_MOVES - Static variable in class nxopen.cam.Cycle.MotionOutputTypes
-
single moves
- SINGLE_OFFSET - Static variable in class nxopen.ExtrudeOffsetDataOffsetType
-
Offset with single distance in one direction
- SINGLE_OFFSET - Static variable in class nxopen.geometricutilities.Type
-
Offset with single distance in one direction
- SINGLE_OUTLINE - Static variable in class nxopen.uf.UFModl.PocketpadType
-
- SINGLE_OUTLINE_CORNER - Static variable in class nxopen.uf.UFModl.PocketpadType
-
- SINGLE_OUTLINE_NO_ATTACH - Static variable in class nxopen.uf.UFModl.PocketpadType
-
- SINGLE_PLANE - Static variable in class nxopen.weld.EasyPatternBuilder.SpacingMethodTypes
-
Use a single plane to cut a sections.
- SINGLE_PLATE - Static variable in class nxopen.tooling.DieBaseBuilder.SplitMethod
-
select single plate
- SINGLE_POINT - Static variable in class nxopen.cae.connections.NodalTargetType
-
Single Point
- SINGLE_POSITION - Static variable in class nxopen.Selection.UistylerSelectionType
-
the position is returned if no object is selected with the
single select gesture
- SINGLE_PROFILE_WITH_FIRST_CUT - Static variable in class nxopen.cam.CAMObject.Attr
-
- SINGLE_REGION - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CutRegionsTypes
-
Cut regions type: Single Region
- SINGLE_SEGMENT - Static variable in class nxopen.features.TubeBuilder.Output
-
single segment output
- SINGLE_SELECT_LIST - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- SINGLE_SELECTION - Static variable in class nxopen.Selection.UistylerSelectionType
-
allows
single select
- SINGLE_SELECTION_LIST - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Single Selection List item
- SINGLE_SIDED - Static variable in class nxopen.drawings.BrokenViewBuilder.TypeBreak
-
SingleSiled Break
- SINGLE_SIDED - Static variable in class nxopen.features.shipdesign.PlateStockBuilder.ThickenOptions
-
Thickness is applied to only the front side of the offset mold face.
- SINGLE_SIDED_COMPARISON - Static variable in class nxopen.validate.RequirementBuilder.DefinitionMethodOptions
-
- SINGLE_SOURCE_MULTIPLE_LINKS - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked Composite Curve feature has multiple curves linked to the same source curve.
- SINGLE_SPLINE - Static variable in class nxopen.SketchProjectBuilder.OutputCurve
-
single spline output
- SINGLE_SUM - Static variable in class nxopen.annotations.BillOfMaterialBuilder.StockLengthType
-
- SINGLE_SUM - Static variable in class nxopen.routing.RouteManager.BomStockLength
-
- SINGLE_WIDTH - Static variable in class nxopen.CGMBuilder.Width
-
Single Width, uses custom widths defined in WidthDefinition
- SINGLE_WIDTH - Static variable in class nxopen.PlotColorsWidthsBuilder.Width
-
Single Width
- SINGLE_WIDTH - Static variable in class nxopen.PrintPDFBuilder.Width
-
Single Width
- SINGLE_WIDTH - Static variable in class nxopen.uf.UFCgm.Widths
-
- SINGLE_WIDTH - Static variable in class nxopen.uf.UFPlot.Widths
-
- singleCurveOrEdgeCollector() - Method in interface nxopen.features.PointSetBuilder
-
Returns the collector that is used to hold a single curve or edge definition.
- SingleDevice - Interface in nxopen.routing
-
The Routing SingleDevice corresponds to an abstract instance of
ItemDefinition
.
- SingleDevice.DeleteObjectResult - Class in nxopen.routing
-
Deletion result
- SingleElementConveyorBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createSingleElementConveyorBuilder
Created in NX9.0.0
- singleFaceObject() - Method in interface nxopen.features.PointSetBuilder
-
Returns the select object that is used to hold the face.
- singleFaceSet() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns a value indicating whether the single face set is true
License requirements: ugweld ("UG WELD")
.
- SingleFacetRule - Interface in nxopen
-
Represents a
FacetSelectionRule
that collects facets without any intent i.e. as if collected with Single Selection rule.
- singlelabels - Variable in class nxopen.cae.LabelRangeSelectionRecipe.LabelRangesData
-
- SingleLabelSelectionRecipe - Interface in nxopen.cae
-
Represents a Selection Recipe based on a single Node Label
To obtain an instance of this object use one of the creators in
SelectionRecipeCollection
.
- singleLeg() - Method in interface nxopen.drawings.RevolvedSectionLineBuilder
-
- singleLeg() - Method in interface nxopen.drawings.SectionLineSegmentsBuilder
-
Returns the single leg
License requirements: None.
- singleLineRepresentation() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilder
-
Returns the single line representation toggle
License requirements: None.
- singleLineRepresentation() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder
-
Returns the Shipbuilding line toggle on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.
- SingleMeasure - Interface in nxopen
-
Represents a single valued measurement .
- singleOffset() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the option to control whether the handles operate individually or not.
- singleOption() - Method in interface nxopen.cae.AssignNodalCSBuilder
-
Returns the single option
License requirements: None.
- singleOption() - Method in interface nxopen.cae.NodeCreateBuilder
-
Returns the single option
License requirements: None.
- singlePassOffset() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Single Pass Offset
License requirements: None.
- singlePlyPerLayer() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the option to group plies into single layer(s) of extruded elements
License requirements: None.
- singlePlyPerLayer() - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
Returns the option to group plies into single layer(s) of extruded elements
License requirements: None.
- singlePosition - Variable in class nxopen.Selection.SelectionDescriptor
-
- singleRoughnessValue() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the single roughness value
License requirements: None.
- singleRoughnessValue() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the single roughness value
License requirements: None.
- singleSelect() - Method in interface nxopen.blockstyler.ListBox
-
Returns the SingleSelect.
- singleSelection - Variable in class nxopen.Selection.SelectionDescriptor
-
- SingleSelectList - Interface in nxopen.uistyler
-
Represents a SingleSelectList for UI Styler .
- SingleSelectList.Activate - Interface in nxopen.uistyler
-
Called when a dialog user selects an entry with a single mouse click
or presses the spacebar on an already selected item.
- SingleSelectList.DoubleClick - Interface in nxopen.uistyler
-
Called when a dialog user double-clicks on an option or presses Return when an item is already selected.
- singleSidedArrowLineLength() - Method in interface nxopen.annotations.SingleSidedDisplayBuilder
-
Returns the arrow line length on the open side of single sided dimension
License requirements: None.
- singleSidedDisplay() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the single sided display builder
License requirements: None.
- SingleSidedDisplayBuilder - Interface in nxopen.annotations
-
- singleSidedValue() - Method in interface nxopen.validate.RequirementBuilder
-
Returns the value for single sided comparison
License requirements: None.
- singleSource - Variable in class nxopen.uf.UFCgm.CustomWidths
-
- singleSource() - Method in interface nxopen.WidthDefinition
-
Returns the single source.
- singleStepBackward() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Simulation Control Panel: Single Step Backward
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- singleStepForward() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Simulation Control Panel: Single Step Forward
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- singleWidth - Variable in class nxopen.uf.UFCgm.CustomWidths
-
- singleWidth() - Method in interface nxopen.WidthDefinition
-
Returns the single width.
- SINGULARITY - Static variable in class nxopen.sim.IsvControlPanelBuilder.DetailType
-
Singularity
- SINT - Static variable in class nxopen.ame.PlcDataType
-
- SinumerikCaExportBuilder - Interface in nxopen.sim
-
This class is used for export a spf file.
- SinumerikCaFacetBuilder - Interface in nxopen.sim
-
This class is used for set the facet tolerance.
- SinumerikCaPlaceholderBuilder - Interface in nxopen.sim
-
This class is used for select or unselect component of the placeholder tools.
- SinumerikCaSimplifyBodiesBuilder - Interface in nxopen.sim
-
This class is used for replace geometry.
- SinumerikCaSimplifyBodiesBuilder.CloseGapTypes - Class in nxopen.sim
-
Represents the close gap types
- SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes - Class in nxopen.sim
-
The object to replaces with types
- SITE - Static variable in class nxopen.options.LevelType
-
Site level
- SITE - Static variable in class nxopen.preferences.LoadDraftingStandardBuilder.LoadLevel
-
the site level
- SITTING_ACROMIAL_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of sitting_acromial_height
- SITTING_EYE_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of sitting_eye_height
- SITTING_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of sitting_height
- SITTING_KNEE_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of sitting_knee_height
- SIX - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Width Six
- SIX - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Width Six
- SIX - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Width Six
- SIX - Static variable in class nxopen.annotations.LineWidth
-
Width Six
- SIX - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Width Six
- SIX - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Width Six
- SIX - Static variable in class nxopen.cae.FluidDomainBuilder.SubdivisionType
-
- SIX - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
- SIX - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
-
- SIX - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
- SIX - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- SIX - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- SIX - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Six
- SIX - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Deprecated.
Width Six
- SIX - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
-
- SIX - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
- SIX - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
- SIX - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions
-
Display in 6 colors.
- SIX - Static variable in class nxopen.PlaneTypes.AlternateType
-
Sixth alternate solution
- SIX - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- SIX - Static variable in class nxopen.preferences.Width
-
Width Six
- SIX - Static variable in class nxopen.tooling.BendOperationBuilder.Prebend
-
six prebends
- SIX - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Bend
-
six bends
- SIX - Static variable in class nxopen.tooling.PrebendBuilder.NumberBendsOption
-
six prebends
- SIX - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- SIX_POINT_NEST - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
Six Point Nest alignment type
- SIX_SCALARS - Static variable in class nxopen.cae.Result.DataType
-
- SIX_VECTOR - Static variable in class nxopen.cae.Result.DataType
-
- SIXTEEN - Static variable in class nxopen.annotations.FractionDenominatorFormat
-
- SIXTEEN - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions
-
16 reflection line.
- SIXTH - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
-
Sixth wrap around distance line.
- SIXTH - Static variable in class nxopen.weld.WeldGroupIdColor
-
Sixth Group Id Color Index
- SIXTY_FOUR - Static variable in class nxopen.annotations.FractionDenominatorFormat
-
- SIXTY_FOUR - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions
-
64 reflection line.
- size() - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.annotations.Centerline2dSettingsBuilder
-
Returns the short dash size parameter for 2D Centerline
License requirements: None.
- size() - Method in interface nxopen.annotations.Centerline3dSettingsBuilder
-
Returns the overrun size parameter for 3D Centerline
License requirements: None.
- size() - Method in interface nxopen.annotations.CenterMarkSettingsBuilder
-
Returns the size parameter for centerline.
- SIZE - Static variable in class nxopen.annotations.ChamferForm
-
5 x 5
- size() - Method in interface nxopen.annotations.CircleCenterlineSettingsBuilder
-
Returns the Center Cross Size parameter
License requirements: None.
- size() - Method in interface nxopen.annotations.IdSymbolBuilder
-
Returns the size
The circle symbols are measured by diameter, the rounded box
is measured by length, and all other symbols are measured by a
circumscribed circle
License requirements: None.
- size - Variable in class nxopen.annotations.Lettering
-
Height of a character
- size() - Method in interface nxopen.annotations.LineWeldSideData
-
Returns the weld size
License requirements: None.
- size() - Method in interface nxopen.annotations.SelectAnnotationList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.annotations.SelectTableSectionList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.annotations.SymmetricalCenterlineSettingsBuilder
-
Returns the offset size parameter
License requirements: None.
- size() - Method in interface nxopen.assemblies.SelectComponentList
-
Returns the number of objects in the list.
- SIZE - Static variable in class nxopen.cae.CAEWeldConnectionBuilder.MeshDensityTypeEnum
-
Size of the each element on the hard object
- SIZE - Static variable in class nxopen.cae.LocalRemeshBuilder.Option
-
Absolute Size
- SIZE - Static variable in class nxopen.cae.MeshControlBuilder.CylinderAxialElementSizeType
-
- SIZE - Static variable in class nxopen.cae.MeshControlBuilder.FilletAxialElementSizeType
-
- SIZE - Static variable in class nxopen.cae.MeshControlBuilder.FilletCircumferenceSizeType
-
- size - Variable in class nxopen.cae.Post.Text
-
- size() - Method in interface nxopen.cae.SelectCAEBodyList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.cae.SelectCAEEdgeList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.cae.SelectCAEFaceList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.cae.SelectFEElemFaceList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.cae.SelectFENodeList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.cae.SelectMeshList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns the text size.
- size() - Method in interface nxopen.cam.HoleBossSet
-
Returns the Size
License requirements: None.
- size() - Method in interface nxopen.cam.SelectCAMFeatureList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.CGMBuilder
-
Returns the size of the CGM.
- size() - Method in interface nxopen.diagramming.tables.CellRangeBuilder
-
Returns the size.
- size() - Method in interface nxopen.display.Stage
-
- size() - Method in interface nxopen.drawings.SelectDraftingViewList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.drawings.SelectDrawingViewList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.facet.SelectFacetedBodyList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.features.SelectBodyFeatureList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.features.SelectDatumCsysList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.features.SelectFeatureList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.features.shipdesign.ShipProfileCutoutBuilder
-
Returns the profile size
License requirements: None.
- size() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the size
License requirements: None.
- size() - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- size() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the size.
- size() - Method in interface nxopen.features.subdivision.SubdivisionTubeBuilder
-
Returns the size of tube in cross section.
- size() - Method in interface nxopen.gateway.ImageCaptureBuilder
-
Returns the size
License requirements: None.
- size() - Method in interface nxopen.layout2d.SelectComponentList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.PrintPDFBuilder
-
Returns the size of the PDF document.
- size() - Method in interface nxopen.SelectBodyList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectCoordinateSystemList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectCurveList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectDatumPlaneList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectDisplayableObjectList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectEdgeList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectExpressionList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectFaceList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectIBaseCurveList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectIBasePlaneList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectICurveList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectINXObjectList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectModelingViewList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectNXObjectList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectObjectList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectPartList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectPointList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectSplineList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectTaggedObjectList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SelectViewList
-
Returns the number of objects in the list.
- size() - Method in interface nxopen.SketchPolygonBuilder
-
Returns the size type
License requirements: None.
- size - Variable in class nxopen.uf.UFCgm.ExportOptions
-
- Size() - Constructor for class nxopen.uf.UFCgm.Size
-
- Size(UFCgm.SizeMode, double, UFCgm.Dimensions) - Constructor for class nxopen.uf.UFCgm.Size
-
- size - Variable in class nxopen.uf.UFDraw.ArrowParms
-
- size - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- size - Variable in class nxopen.uf.UFDrf.IdSymbolInfo
-
- size - Variable in class nxopen.uf.UFDrf.Lettering
-
- size - Variable in class nxopen.uf.UFDrf.WeldSymInfo
-
- size - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParms1Data
-
- size - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParmsData
-
- size - Variable in class nxopen.uf.UFSf.EdgeDensityData
-
- SIZE_ANGLE - Static variable in class nxopen.annotations.ChamferForm
-
5 x 45
- SIZE_BY_DIMENSIONS - Static variable in class nxopen.uf.UFCgm.SizeMode
-
- SIZE_BY_SCALE - Static variable in class nxopen.uf.UFCgm.SizeMode
-
- SIZE_TOLERANCE_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- sizeBuilder() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the size builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- sizeCode - Variable in class nxopen.uf.UFDrf.WeldSymInfo
-
- SizeData() - Constructor for class nxopen.annotations.UserSymbolPreferences.SizeData
-
- SizeData() - Constructor for class nxopen.diagramming.SheetBuilder.SizeData
-
- SizedSymbol - Class in nxopen.diagramming.tables
-
Represents sized symbol information.
- SizedSymbol() - Constructor for class nxopen.diagramming.tables.SizedSymbol
-
- SizedSymbol(double, TaggedObject, double, double) - Constructor for class nxopen.diagramming.tables.SizedSymbol
-
Constructor for the SizedSymbol object.
- sizeEnum() - Method in interface nxopen.linedesigner.InsertSheetBuilder
-
Returns the size enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- sizeExpression() - Method in interface nxopen.display.EnvironmentBuilder
-
Returns the environment size expression
License requirements: studio_render ("UG STUDIO RENDER")
.
- sizeExpression() - Method in interface nxopen.display.Stage
-
Returns the stage size expression
License requirements: None.
- sizeFactor() - Method in interface nxopen.drawings.ViewProjectedArrowSettingsBuilder
-
Returns the size factor
License requirements: None.
- sizeFormat() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
Returns the size format
License requirements: None.
- SIZEIN_BOUNDING_BOX - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity
-
- SIZEIN_BOUNDING_SPHERE - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity
-
- sizeLaw() - Method in interface nxopen.features.HelixBuilder
-
Returns the size law
License requirements: None.
- sizeLetterCode() - Method in interface nxopen.annotations.LineWeldSideData
-
Returns the weld size letter code (ISO and DIN only)
License requirements: None.
- SizeLetterCode - Class in nxopen.annotations
-
Specifies the weld size letter code (ISO and DIN only)
- sizeList() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the list containing the sizes used to create the bead.
- sizeMethod() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the measurement size method.
- SIZEON_ELEMENTS - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity
-
- SIZEON_OBJECTS - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.ResolutionDensity
-
- sizeOption() - Method in interface nxopen.cae.LocalRemeshBuilder
-
Returns the size option
License requirements: None.
- sizeOption() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the size option
License requirements: None.
- sizeOption() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the size option
License requirements: None.
- sizeOption() - Method in interface nxopen.features.HelixBuilder
-
Returns the size option
License requirements: None.
- sizeOption() - Method in interface nxopen.features.LocalScaleCurveBuilder
-
Returns a value that indicates which size option is selected
License requirements: None.
- sizeOption() - Method in interface nxopen.features.MoveCurveBuilder
-
Returns a value that indicates which size option is selected
License requirements: None.
- sizeOption() - Method in interface nxopen.geometricutilities.HelixPattern
-
Returns the Helix size option
License requirements: None.
- sizePoint() - Method in interface nxopen.SketchPolygonBuilder
-
Returns the size point
License requirements: None.
- sizePrecision() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the size precision of the stock.
- sizer() - Method in interface nxopen.tooling.ToolingManager
-
Returns the SIZERCollection instance belonging to this part .
- SIZERCollection - Interface in nxopen.tooling
-
Represents a collection of SIZER
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- SIZERExportBuilder - Interface in nxopen.tooling
-
Exports input parameters for motor selection to SIZER drive design to
support the sizing, configuration, and selection of drive components.
- SIZERExportBuilder.MCDMechanicalData - Class in nxopen.tooling
-
Defines the mechanical data in MCD mode.
- SIZERExportBuilder.MechanicalData - Class in nxopen.tooling
-
Defines the mechanical data in Motion mode.
- SIZERExportBuilder.RunMode - Class in nxopen.tooling
-
Represents the run mode.
- SIZERImportBuilder - Interface in nxopen.tooling
-
Imports results for motor selection from SIZER drive design based on
the sizing, configuration, and selection of drive components.
- SIZERImportBuilder.PositionMode - Class in nxopen.tooling
-
Represents the position mode.
- sizeSpiralType() - Method in interface nxopen.geometricutilities.SpiralPattern
-
Returns the size spiral type
License requirements: None.
- sizeString() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the standard size setting.
- sizeSubtype() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the size type of mesh control
License requirements: nx_masterfem ("Finite Element Modeling")
.
- sizeType - Variable in class nxopen.annotations.SimpleDraftingAid.UserSymbolSizeData
-
Whether the length and height or scale and aspect ratio is used
- sizeType - Variable in class nxopen.annotations.UserSymbolPreferences.SizeData
-
Specifies whether length and height or scale and aspect ratio is used
- sizeValue() - Method in interface nxopen.cae.LocalRemeshBuilder
-
Returns the size value
License requirements: None.
- sizeX() - Method in interface nxopen.features.LatticeBuilder
-
Returns the size of the unit cell bounding box in x axis,
and effective only when the bounding box is not a uniform cube
License requirements: None.
- sizeY() - Method in interface nxopen.features.LatticeBuilder
-
Returns the size of the unit cell bounding box in y axis,
and effective only when the bounding box is not a uniform cube
License requirements: None.
- sizeZ() - Method in interface nxopen.features.LatticeBuilder
-
Returns the size of the unit cell bounding box in z axis,
and effective only when the bounding box is not a uniform cube
License requirements: None.
- sizingMethod() - Method in interface nxopen.diagramming.tables.CellRangeBuilder
-
Returns the sizing method.
- SizingMethod - Class in nxopen.diagramming.tables
-
Represents the column/row sizing method.
- sizingMethod() - Method in interface nxopen.die.PierceItemBuilder
-
Returns the sizing method
License requirements: None.
- sizingOption() - Method in interface nxopen.cae.CfdAutoRefinementConstraintBuilder
-
Returns the sizing option
License requirements: None.
- sizingOption() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
Returns the sizing option
License requirements: None.
- sizingOption() - Method in interface nxopen.cae.CfdLocalResolutionConstraintBuilder
-
Returns the sizing option
License requirements: None.
- sizingOption() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the sizing option
License requirements: nx_masterfem ("Finite Element Modeling")
.
- sket() - Method in interface nxopen.UFSession
-
- sketch() - Method in interface nxopen.cae.GeneralGeometryBeamSectionBuilder
-
Returns the sketch to define geometry beam section
License requirements: None.
- SKETCH - Static variable in class nxopen.drawings.GeneralWorkFlowBuilder.GridSettingsType
-
- SKETCH - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
Sketch feature
- sketch() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the sketch
License requirements: None.
- sketch() - Method in interface nxopen.features.SectionEditBuilder
-
Returns the sketch which holds the section curves
License requirements: None.
- sketch() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the Slave Sketch used by the Bead, If one exists.
- sketch() - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Returns the Sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- sketch() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Returns the sketch
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- sketch() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Returns the internal sketch (used to specify rip curves), if it exists.
- sketch() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Returns the Slave Sketch used by the Dimple, If one exists.
- sketch() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the Slave Sketch used by the Drawn Cutout, If one exists.
- sketch() - Method in interface nxopen.features.sheetmetal.EdgeRipBuilder
-
Returns the Slave Sketch used by the Edge Rip, If one exists.
- sketch() - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Returns
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- sketch() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
Returns the Sketch used by Lightening Cutout
License requirements: None.
- sketch() - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Returns the internal sketch used by the louver's section.
- sketch() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the internal sketch used by the normal cutout, if it exists.
- sketch() - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Returns the sketch of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- sketch() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the sketch
License requirements: None.
- sketch() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the sketch
License requirements: None.
- sketch() - Method in interface nxopen.features.SketchFeature
-
Returns the sketch that is owned by this feature
License requirements: None.
- sketch() - Method in interface nxopen.fields.FieldProfileTable
-
Returns the field
License requirements: None.
- sketch() - Method in interface nxopen.layout2d.InsertComponentBuilder
-
Returns the sketch to insert the 2D Component
License requirements: None.
- SKETCH - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- SKETCH - Static variable in class nxopen.preferences.SessionDrafting.GridObjectType
-
Sketch Grid
- sketch() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing sketch preferences settings applicable to entire session .
- Sketch - Interface in nxopen
-
- sketch() - Method in interface nxopen.SketchExpressionModifierBuilder
-
Returns the sketch
License requirements: None.
- SKETCH - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.UseFaceOrSketchToRevolve
-
- SKETCH - Static variable in class nxopen.tooling.WorkpieceBuilder.MethodType
-
Create block by extrude the sketch
- SKETCH - Static variable in class nxopen.weld.WeldBeadBuilder.Types
-
sketch shape
- Sketch.AddEllipseOption - Class in nxopen
-
- Sketch.AlternateSolutionOption - Class in nxopen
-
Indicates whether the alternate solution should be used instead of the regular solution.
- Sketch.AssocType - Class in nxopen
-
- Sketch.AutoDimensioningRule - Class in nxopen
-
Type of Auto Dimensioning rules.
- Sketch.ConstraintClass - Class in nxopen
-
Represents the class of the constraint.
- Sketch.ConstraintGeometry - Class in nxopen
-
Used by the create geometric constraint methods to indicate what geometry
the constraint should be applied to.
- Sketch.ConstraintGeometryHelp - Class in nxopen
-
Used by several constraint creation methods that need a help point or parameter
to indicate how to create the constraint.
- Sketch.ConstraintGeometryHelpType - Class in nxopen
-
Used in ConstraintHelp to indicate what type of help it is
- Sketch.ConstraintPointType - Class in nxopen
-
Used in ConstraintGeometry to indicate what type of point, if any, the geometry is
- Sketch.ConstraintType - Class in nxopen
-
Represents the type of constraint
- Sketch.CopyObjectData - Class in nxopen
-
This structure represents a map between the original object to be copied
and the corresponding copied object.
- Sketch.CopyObjectsWithDimensionOutputData - Class in nxopen
-
- Sketch.CreateDimensionOption - Class in nxopen
-
Used in fillet to indicate whether a radius dimension should be created
by the fillet
- Sketch.CreateInferConstraintSetting - Class in nxopen
-
Indicates if the infer constraints will be created or not
- Sketch.DeleteThirdCurveOption - Class in nxopen
-
Indicates whether the 3rd curve should be deleted when doing a 3 curve fillet
- Sketch.DimensionGeometry - Class in nxopen
-
Used in the dimension creation methods to indicate what geometry to
create the dimension on.
- Sketch.DimensionOption - Class in nxopen
-
Used by
Sketch.createDimension(nxopen.Sketch.ConstraintType, nxopen.Sketch.DimensionGeometry, nxopen.Sketch.DimensionGeometry, nxopen.Point3d, nxopen.Expression)
,
Sketch.createRadialDimension(nxopen.Sketch.DimensionGeometry, nxopen.Point3d, nxopen.Expression)
Sketch.createDiameterDimension(nxopen.Sketch.DimensionGeometry, nxopen.Point3d, nxopen.Expression)
and
Sketch.createPerimeterDimension(nxopen.Curve[], nxopen.Point3d, nxopen.Expression)
to determine whether to create driving or reference dimension
- Sketch.FilletData - Class in nxopen
-
- Sketch.InferConstraintsOption - Class in nxopen
-
Used when adding a point or curve to a sketch.
- Sketch.PlaneOption - Class in nxopen
-
Specifies the plane type used for a Sketch
- Sketch.ReferenceDirectionData - Class in nxopen
-
- Sketch.Status - Class in nxopen
-
Represents the status of the sketch
- Sketch.StatusData - Class in nxopen
-
- Sketch.TrimInputOption - Class in nxopen
-
Indicates whether the input curves should be trimmed when doing a fillet
- Sketch.UpdateLevel - Class in nxopen
-
Used to indicate how much the updating should occur
- Sketch.ViewReorient - Class in nxopen
-
Used to indicate whether to reorient the view when the sketch is activated
- SKETCH_CONSTRAINT - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- SKETCH_CURVES - Static variable in class nxopen.DxfdwgImporter.ImportCurvesAs
-
Convert curves as sketch curves
- SKETCH_CURVES_ARCS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Sketch Curves arcs filter
- SKETCH_CURVES_CIRCLES - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Sketch Curves circles filter
- SKETCH_CURVES_CONICS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Sketch Curves conics filter
- SKETCH_CURVES_LINES - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Sketch Curves lines filter
- SKETCH_CURVES_SPLINES - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Sketch Curves splines filter
- SKETCH_DIMENSION - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
-
Sketch dimension variables
- SKETCH_DIMENSION - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- SKETCH_GEOMETRY - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- SKETCH_GEOMETRY_NON_REFERENCE - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- SKETCH_GEOMETRY_REFERENCE - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- SKETCH_GRID - Static variable in class nxopen.uf.UFDisp.GridContext
-
- SKETCH_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
-
- SKETCH_NOT_CREATED - Static variable in class nxopen.uf.UFConstants
-
- SKETCH_NOTEBOOK - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- SKETCH_NOTEBOOK - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- SKETCH_ONLY - Static variable in class nxopen.Sketch.UpdateLevel
-
Only update the sketch
- SKETCH_PROFILE - Static variable in class nxopen.tooling.DieInsertBuilder.InsertModeItems
-
The die insert mode is sketch profile
- SKETCH_SHARING - Static variable in class nxopen.features.ShipCollection.SteelFeatureApproach
-
Sketch sharing approach
- SKETCH_TYPE - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.TypeOptions
-
Sketch type normal cutout
- SketchAlignmentConstraint - Interface in nxopen
-
- SketchAlignmentConstraint.Type - Class in nxopen
-
Represents the alignment type of the constraint
- SketchAlongPathBuilder - Interface in nxopen
-
- SketchAlongPathBuilder.PlaneOrientationType - Class in nxopen
-
Indicates the orientation of the plane
- SketchAlongPathBuilder.SketchOrientationType - Class in nxopen
-
Indicates the sketch orientation method.
- SketchAngularDimensionBuilder - Interface in nxopen
-
- SketchAssociativeTrim - Interface in nxopen
-
- SketchAssociativeTrimBuilder - Interface in nxopen
-
- SketchAssociativeTrimBuilder.TrimOption - Class in nxopen
-
Represents the keep discard options for selected region
- SketchAutoConstrainBuilder - Interface in nxopen
-
- SketchAutoDimensionBuilder - Interface in nxopen
-
- SketchAutoDimensionBuilder.DimType - Class in nxopen
-
dimension type to be created
- sketchBlock() - Method in interface nxopen.EndCutBlockBuilder
-
Returns the end cut block
License requirements: None.
- sketchBlock() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the sketch block
License requirements: None.
- sketchBlock() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the sketch block.
- sketchBlock() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the sketch block.
- sketchBlock() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the library sketch block that defines the Cutout outline
License requirements: None.
- sketchBlock() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the library sketch block that defines the cut outline
License requirements: None.
- sketchBlock() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the sketch block.
- sketchBlock() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
Returns the sketch block
License requirements: None.
- SketchChamferBuilder - Interface in nxopen
-
- SketchChamferBuilder.ChamferOptions - Class in nxopen
-
Dialog options for Chamfer Creation
- SketchCollection - Interface in nxopen
-
Represents a collection of sketches
To obtain an instance of this class, refer to
Part
Created in NX3.0.0
- SketchConicBuilder - Interface in nxopen
-
- SketchConstraint - Interface in nxopen
-
Represents a constraint in a sketch.
- SketchConstraintBuilder - Interface in nxopen
-
- SketchConstraintBuilder.Constraint - Class in nxopen
-
the types of the constraint
- SketchConversionReport - Interface in nxopen.features
-
Represents a collection of status of conversion of features to independent sketch.
- SketchConversionStatus - Interface in nxopen.features
-
Represents the status of conversion of features to independent sketch.
- SketchConversionStatus.ReasonType - Class in nxopen.features
-
Reason for partial-success or failure of conversion to sketch
- SketchConversionStatus.Type - Class in nxopen.features
-
Status of conversion - Success, Failure or Partial-Success
- SketchCornerBuilder - Interface in nxopen
-
Create a corner between two sketch curves.
- sketchCurves() - Method in interface nxopen.cae.BaseFemPart
-
Returns the Sketch Curves collection belonging to the part .
- SketchCurves - Interface in nxopen.cae
-
Represents a Beam Cross Section
This is an abstract class
.
- SketchCurvesCollection - Interface in nxopen.cae
-
Represents the collection of all
SketchCurves
in a fem part
To obtain an instance of this class, refer to
BaseFemPart
Created in NX7.5.0
- sketchDefaultAction() - Method in interface nxopen.preferences.SessionModeling
-
Returns the sketch default action
License requirements: None.
- SketchDimensionalConstraint - Interface in nxopen
-
Represents a dimensional constraint
To create an instance of this class refer to
Sketch
Created in NX3.0.0
- SketchDimensionalConstraint.DimensionStateType - Class in nxopen
-
Dimension status.
- SketchDimensionBuilder - Interface in nxopen
-
Edit the geometry references of an existing sketch dimension.
- SketchDimensionBuilder.ExpOption - Class in nxopen
-
This enum determines the expression behavior when a dimension is attached to new geometry
- SketchedHalfSectionLine - Interface in nxopen.drawings
-
Sketched Half Section Line is sketch based section line.
- SketchEditDefiningSectionBuilder - Interface in nxopen
-
- sketchEditOption() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option that determines whether or not task environment is used to edit the sketch
License requirements: None.
- SketchedPointToPointSectionLine - Interface in nxopen.drawings
-
Sketched Point to Point Section Line is sketch based section line.
- SketchedSteppedSectionLine - Interface in nxopen.drawings
-
A Sketched Simple or Stepped Section Line is sketch based section line.
- SketchEllipseBuilder - Interface in nxopen
-
- SKETCHES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide sketches
- SKETCHES - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption
-
sketches
- sketches() - Method in interface nxopen.features.WaveSketchBuilder
-
Returns the sketch to link
License requirements: None.
- sketches() - Method in interface nxopen.Part
-
Returns the SketchCollection instance belonging to this part .
- sketches() - Method in interface nxopen.SketchExpressionModifierBuilder
-
Returns the sketches
License requirements: None.
- SKETCHES_SOLID - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.OutputOption
-
sketches and solid body
- SketchEvaluator - Interface in nxopen
-
Represents a sketch-on-path evaluator.
- SketchEvaluatorCollection - Interface in nxopen
-
- sketchEvaluators() - Method in interface nxopen.Part
-
Returns the collection of SketchEvaluator .
- SketchExpressionModifierBuilder - Interface in nxopen
-
Represents a Sketch Expression Modifier Builder.
- SketchExpressionModifierBuilder.EndCuts - Class in nxopen
-
End cut
- SketchFeature - Interface in nxopen.features
-
Represents a sketch feature
This is an abstract class, and cannot be instantiated
.
- SketchFitCurveBuilder - Interface in nxopen.features
-
Sketch Fit Curve builder class.
- SKETCHFROM_OTHER_PART - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.TireDefinitionOption
-
Use curves from a sketch in another part.
- SketchG1Constraint - Interface in nxopen
-
- SketchG1Constraint.SlopeType - Class in nxopen
-
Represents the G1 slope type of the constraint
- SketchG2Constraint - Interface in nxopen
-
- SketchGeometricConstraint - Interface in nxopen
-
Represents a geometric sketch constraint
To create an instance of this class refer to
Sketch
.
- sketchGroupRelationScope() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates what kind of sketch group relations are needed to recognize
License requirements: None.
- sketchGroupType() - Method in interface nxopen.GroupBuilder
-
Returns the type of sketch group that gets created
License requirements: None.
- SketchHelpedDimensionalConstraint - Interface in nxopen
-
Represents a dimensional sketch constraint that has a help point or help parameter
.
- SketchHelpedGeometricConstraint - Interface in nxopen
-
Represents a geometric sketch constraint that has a help point or help parameter
To obtain an instance of this class, use
Sketch
.
- SketchInDraftingBuilder - Interface in nxopen
-
- SketchInPlaceBuilder - Interface in nxopen
-
- SketchIntersectionCurve - Interface in nxopen
-
- SketchIntersectionCurveBuilder - Interface in nxopen
-
- SketchIntersectionCurveBuilder.OldAndNewOutputCurvesData - Class in nxopen
-
- SketchIntersectionPoint - Interface in nxopen
-
- SketchIntersectionPointBuilder - Interface in nxopen
-
- SketchLinearDimensionBuilder - Interface in nxopen
-
- SketchMakeSymmetricBuilder - Interface in nxopen
-
- SketchMirrorPatternBuilder - Interface in nxopen
-
- SketchOffset - Interface in nxopen
-
- SketchOffset.CapType - Class in nxopen
-
Represents the cap type of the offset
- SketchOffsetBuilder - Interface in nxopen
-
- sketchOnPath() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the SketchOnPath
License requirements: None.
- sketchOnPath() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the SketchOnPath
License requirements: None.
- sketchOnPathFeature() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the sketch on path
License requirements: None.
- sketchOrient() - Method in interface nxopen.SketchAlongPathBuilder
-
- sketchOrientation() - Method in interface nxopen.tooling.WireHoleBuilder
-
Returns the orientation to create wire hole sketch
License requirements: None.
- sketchOrigin() - Method in interface nxopen.SketchInPlaceBuilder
-
Returns the origin point for sketch
License requirements: None.
- sketchParentPlane() - Method in interface nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder
-
Returns the option to set sketch plane as parent
License requirements: None.
- SketchPasteBuilder - Interface in nxopen
-
- SketchPattern - Interface in nxopen
-
- SketchPattern.InstanceControl - Class in nxopen
-
Represents the type of instance control for circular patterns
- SketchPattern.Type - Class in nxopen
-
Represents the pattern type of the constraint
- SketchPatternBuilder - Interface in nxopen
-
- sketchPlane() - Method in interface nxopen.tooling.WireHoleBuilder
-
Returns the plane to create wire hole sketch
License requirements: None.
- sketchPoint() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the part sketch point section
License requirements: None.
- SketchPolygon - Interface in nxopen
-
Represents a polygon constraint in a sketch
To create or edit an instance of this class, use
SketchPolygonBuilder
Created in NX7.5.0
- SketchPolygonBuilder - Interface in nxopen
-
- SketchPolygonBuilder.SizeType - Class in nxopen
-
Polygon type
- SketchPreferences - Interface in nxopen.preferences
-
Represents the set of sketch preferences applicable on
Sketch
object
To obtain an instance of this class, refer to
Sketch
Created in NX3.0.0
- SketchPreferences.DimensionLabelType - Class in nxopen.preferences
-
Describes the different options for displaying dimension labels.
- SketchProjectBuilder - Interface in nxopen
-
- SketchProjectBuilder.OutputCurve - Class in nxopen
-
This enum represents the kind of output curves
- SketchQuickExtendBuilder - Interface in nxopen
-
- SketchQuickTrimBuilder - Interface in nxopen
-
- SketchRadialDimensionBuilder - Interface in nxopen
-
- SketchRapidDimensionBuilder - Interface in nxopen
-
- sketchSection() - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Returns the sketch section
License requirements: None.
- sketchSection() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the sketch
License requirements: None.
- SketchSectionLineBuilder - Interface in nxopen.drawings
-
- SketchSectionLineBuilder.SectionLineTypes - Class in nxopen.drawings
-
Section line type
- SketchSectionLineBuilder.Type - Class in nxopen.drawings
-
Section type
- SketchSplineBuilder - Interface in nxopen.features
-
Sketch Spline builder class.
- SketchTangentConstraint - Interface in nxopen
-
- SketchTangentToStringConstraint - Interface in nxopen
-
- sketchToRevolve() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the sketch to revolve
License requirements: None.
- sketchWorkPlaneEmphasis() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not objects on the work
plane are emphasized in the Sketch Task Environment.
- sketStatus - Variable in class nxopen.uf.UFSket.AskSketchStatusData
-
- skew() - Method in interface nxopen.features.BridgeCurveBuilder
-
- SKEW - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType
-
Skew control
- skew() - Method in interface nxopen.geometricutilities.DepthSkewBuilder
-
Returns the skew
License requirements: None.
- skew - Variable in class nxopen.uf.UFModl.StycornerCrvOpt
-
- SKEW_ANGLE - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- skewLaw() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the skew
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- SKIN - Static variable in class nxopen.features.AeroFlangeBuilder.AlignReferenceType
-
- SKIN - Static variable in class nxopen.features.AeroRibBuilder.AlignReferenceType
-
- skinFaceCollector() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the skin face collector
License requirements: None.
- skinFaceCollector() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the skin face collector
License requirements: None.
- SKIP - Static variable in class nxopen.cae.PostGraphBuilder.DataErrorHandling
-
- SKIP - Static variable in class nxopen.cae.PostGraphBuilder.EvalutionErrors
-
- SKIP - Static variable in class nxopen.cae.PostGraphBuilder.IncompatibleResult
-
- SKIP - Static variable in class nxopen.cae.ResultProbeBuilder.ErrorHandling
-
- SKIP - Static variable in class nxopen.cae.ResultsCombinationBuilder.EvaluationError
-
- SKIP - Static variable in class nxopen.cae.ResultsCombinationBuilder.IncompatibleResults
-
- SKIP - Static variable in class nxopen.cae.ResultsCombinationBuilder.NoData
-
- SKIP - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.IncompatibleResults
-
- SKIP - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.NoData
-
- SKIP - Static variable in class nxopen.cae.ResultsReductionBuilder.EvaluationError
-
- SKIP - Static variable in class nxopen.cae.ResultsReductionBuilder.IncompatibleResults
-
- SKIP - Static variable in class nxopen.cae.ResultsReductionBuilder.NoData
-
- SKIP - Static variable in class nxopen.cae.TransientResultsReductionBuilder.EvaluationError
-
- SKIP - Static variable in class nxopen.cae.TransientResultsReductionBuilder.IncompatibleResults
-
- SKIP - Static variable in class nxopen.cae.TransientResultsReductionBuilder.NoData
-
- SKIP - Static variable in class nxopen.cam.CutParametersActionWhenGougingTypes
-
Skip
- SKIP - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.GougeActionTypes
-
Skip
- SKIP - Static variable in class nxopen.cam.DmSurfBuilder.GougeActionType
-
Skip
- SKIP - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.IfEngageDoesNotFitTypes
-
Skip
- SKIP - Static variable in class nxopen.weld.WeldArcMethod
-
creates multiple solids
- SKIP - Static variable in class nxopen.weld.WeldJointBuilder.SplitTypes
-
Skip joint.
- SKIP_OBJECT_AND_CONTINUE - Static variable in class nxopen.drawings.ConversionProcessSettingsBuilder.ActionOnErrorEnum
-
- SKIP_OVERRIDES - Static variable in class nxopen.routing.DesignRuleViolationViewer.FilterOption
-
will not show overridden violations
- SKIP_TRIMMING - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.TrimmingOptionType
-
Skip trimming for replacement sheets
- skipChecking() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of skip checking based on result up-to-date status.
- skipCheckingDontLoadPart() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of skipping checking without loading parts
License requirements: None.
- skipedobj - Variable in class nxopen.motion.PostProcess.CreateEnvelopeData
-
The objects skipped because invisible or not moving
- skipEmptyLayer() - Method in interface nxopen.DxfdwgImporter
-
Returns the SkipEmptyLayer command - if set to true, unreferenced AutoCAD layers will not be transalated
License requirements: None.
- skipLabelBegin() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the label from which skip to be started
License requirements: None.
- skipLabelFrequency() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the label skip frequency
License requirements: None.
- skipOverriddenResultOption() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of skip checking based on result overriden state.
- SKIPPED - Static variable in class nxopen.Validation.Result
-
Validation Skipped
- skipSorting(boolean) - Method in interface nxopen.Section
-
Sets the option to skip sorting the section loops or not.
- skipSteps() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the skip steps
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- skipSteps() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the skipped steps
License requirements: None.
- skipTicBegin() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the tic from which skip to be started
License requirements: None.
- skipTicFrequency() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the tic skip frequency
License requirements: None.
- slackdirection - Variable in class nxopen.routing.SplinePathBuilder.IsLengthLockedData
-
The direction to apply slack.
- slacked - Variable in class nxopen.routing.SplinePathBuilder.IsSplineSlackedData
-
Is slack applied to the spline?
- slacktype - Variable in class nxopen.routing.SplinePathBuilder.IsSplineSlackedData
-
The type of slack.
- slackvalue - Variable in class nxopen.routing.SplinePathBuilder.IsSplineSlackedData
-
The added amount of slack.
- SLALOM - Static variable in class nxopen.motion.SegmentBuilder.TypeChoices
-
Slalom
- slalomElevationChange() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the elevation change of a slalom segment
License requirements: mechanisms ("MECHANISMS")
.
- slalomForwardLength() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the forward length of a slalom segment
License requirements: mechanisms ("MECHANISMS")
.
- slantAngle() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the slant angle in degrees
License requirements: None.
- slaveAxisJoint() - Method in interface nxopen.mechatronics.CouplingBuilder
-
Returns the slave axis joint.
- slaveAxisType() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the slave axis type.
- slaveAxisType() - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder
-
Returns the axis joint type.
- slaveMax - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment slave max
- slaveMaximum() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Returns the maximum slave value.
- slaveMaximum() - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
Returns the slaveMax.
- slaveMin - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment slave min
- slaveMinimum() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Returns the minimum slave
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- slaveMinimum() - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
Returns the slaveMin.
- slaveMultiple() - Method in interface nxopen.mechatronics.GearBuilder
-
Returns the slave multiple.
- slaveOffset() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the slave offset.
- slaveOffset() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns an offset that specifies from the master slave zero point relative to the path
zero point for path interpolation.
- slavePathsCreated - Variable in class nxopen.routing.OffsetPathCollection.CreateCircularOffsetPathData
-
The created slave offset paths
- slavePathsCreated - Variable in class nxopen.routing.OffsetPathCollection.CreateRectangularOffsetPathData
-
The created slave offset paths
- slaveScaleFactor() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the slave scale factor.
- slaveScaleFactor() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the transformation that is described between the normalized representation to the absolute
values.
- slaveUnit() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Returns the type of slave joint or slave controller
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- slaveUnit() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the slave value unit
License requirements: None.
- slaveUnit() - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
Returns the slaveUnit.
- SLEEPING - Static variable in class nxopen.assemblies.productinterface.InterfaceObject.InvalidState
-
product interface is sleep
- SLEEPY_ENTITY - Static variable in class nxopen.ScEvaluationFiltertype
-
- SLEEVE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CompensationType
-
- SLEEVE - Static variable in class nxopen.tooling.EjectorTableBuilder.EjectorType
-
sleeve ejectors
- SLEEVE - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes
-
Sleeve joint for pipe welding.
- sleeveColorFontWidth() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the color, font, and width of the sleeve joint curves.
- SLEEVED - Static variable in class nxopen.routing.StockType
-
Sleeved, e.g., woven nylon
- SLEEVED - Static variable in class nxopen.routing.Type
-
- SLICE - Static variable in class nxopen.display.DynamicSectionTypes.Clip
-
Slice type clip
- sliceFormat() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the slice format
License requirements: None.
- sliceNormalVector() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the slice normal vector
License requirements: None.
- sliceNumber() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the slice number
License requirements: None.
- SLIDER - Static variable in class nxopen.cae.connections.DofCombination
-
DOF1 free, DOF2 fixed, DOF3 fixed, DOF4 fixed, DOF5 fixed, DOF6 fixed
- SLIDER - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type is a single translation.
- SLIDER - Static variable in class nxopen.positioning.Constraint.Type
-
For internal use only
- SLIDER_JOINT - Static variable in class nxopen.motion.ConnectorBuilder.AttachmentType
-
connector is attacted to slider joint
- SLIDER_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
-
- SLIDER_PIVOT - Static variable in class nxopen.cae.connections.DofCombination
-
DOF1 free, DOF2 fixed, DOF3 fixed, DOF4 free, DOF5 fixed, DOF6 fixed
- SLIDER_SPRING_DAMPER - Static variable in class nxopen.uf.UFMotion.SpringDamperType
-
- sliding() - Method in interface nxopen.mechatronics.CurveOnCurveJointBuilder
-
Returns the sliding
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- SLIDING - Static variable in class nxopen.motion.JointFrictionAdams.FrictionEffect
-
- SLIDING - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionEffect
-
- SlidingJoint - Interface in nxopen.mechatronics
-
Represents the Sliding Joint.
- SlidingJointBuilder - Interface in nxopen.mechatronics
-
- SlidingJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Sliding Joint.
- slidingJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- slipForces() - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
Returns the slip forces type.
- slipVelocity - Variable in class nxopen.uf.UFMotion.ContactParameters
-
- slipVelocityExpression() - Method in interface nxopen.motion.CurveContactAdams
-
Returns the slip velocity expression
License requirements: None.
- slipVelocityExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the slip velocity expression
License requirements: None.
- SliverFaceMethod - Interface in nxopen.cae
-
Represents the output from the sliver face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- sliverTol() - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder
-
Returns the sliver tolerance
License requirements: None.
- slope - Variable in class nxopen.cae.AfuMathFastRMSInfo.Data
-
the side lobes slope value
- slope - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- Slope - Interface in nxopen.features.vehicledesign
-
Represents a Slope feature
To create or edit an instance of this class, use
SlopeBuilder
Created in NX8.5.0
- slope - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
point slope
- SLOPE - Static variable in class nxopen.Sketch.ConstraintType
-
- slope - Variable in class nxopen.uf.UFCurve.PtSlopeCrvatr
-
- SLOPE - Static variable in class nxopen.uf.UFSket.ConType
-
- slope - Variable in class nxopen.uf.UFStudio.StybldCurveTrans
-
- slope - Variable in class nxopen.uf.UFStudio.StybldShapeTrans
-
- slope2 - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment slope of upper end
- SLOPE_OF_CURVE - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- SlopeAnalysisBuilder - Interface in nxopen.geometricanalysis
-
Represents a Slope Analysis builder.
- SlopeAnalysisBuilder.DisplayModes - Class in nxopen.geometricanalysis
-
The display type.
- slopeAtEndPoint() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the slope at end point.
- slopeAtStartPoint() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the slope at start point.
- SlopeBuilder - Interface in nxopen.features.vehicledesign
-
The builder to create slope feature.
- SlopeBuilder.PositionType - Class in nxopen.features.vehicledesign
-
Represents the slope positions.
- SlopeBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
-
Represents the requirements control types to define the slope.
- SlopeBuilder.VisualizationType - Class in nxopen.features.vehicledesign
-
Represents the visualization types of the output.
- SlopeBuilder.WheelSizeType - Class in nxopen.features.vehicledesign
-
Represents the wheel size types to calculate slope output.
- slopeControl() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the slope control.
- slopeEqualNext - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
if the segment slope equal with the next segment
- slopeEqualPrev - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
if the segment slope equal with the previous segment
- slopeNode() - Method in interface nxopen.geometricutilities.SShapedLawBuilder
-
Returns the slope node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- slopeType - Variable in class nxopen.uf.UFCurve.PtSlopeCrvatr
-
- Slot() - Constructor for class nxopen.mechatronics.ExpressionBlockBuilder.Slot
-
- Slot(ExpressionBlockBuilder.SlotType, String, ExpressionBlockBuilder.DataType, boolean, int, double, Unit, String, String, NXObject, int) - Constructor for class nxopen.mechatronics.ExpressionBlockBuilder.Slot
-
Constructor for the Slot object.
- SLOT_DATUM_LOCATION - Static variable in class nxopen.uf.UFConstants
-
- SLOT_DATUM_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- SLOT_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- SLOT_HOR - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.BottomPlateSlugItems
-
Bottom plate slug type is slot horizontal
- SLOT_HOR - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems
-
Die shoe slug type is slot horizontal
- SLOT_HOR - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Bottom plate slug type is slot horizontal
- SLOT_HOR - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Die shoe slug type is slot horizontal
- SLOT_HOR - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType
-
Bottom backing plate slug type is slot horizontal
- SLOT_HOR - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalDieShoeSlugType
-
Die shoe slug type is slot horizontal
- SLOT_MEASUREMENT_LOCATION - Static variable in class nxopen.uf.UFConstants
-
- SLOT_MEASUREMENT_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- SLOT_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- SLOT_TAB - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Slot or Tab
- SLOT_TAB - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Slot/Tab Feature
- SLOT_TAB - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Slot Tab
- SLOT_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- SLOT_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- SLOT_VER - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.BottomPlateSlugItems
-
Bottom plate slug type is slot vertical
- SLOT_VER - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems
-
Die shoe slug type is slot vertical
- SLOT_VER - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Bottom plate slug type is slot vertical
- SLOT_VER - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Die shoe slug type is slot vertical
- SLOT_VER - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType
-
Bottom backing plate slug type is slot vertical
- SLOT_VER - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalDieShoeSlugType
-
Die shoe slug type is slot vertical
- SLOT_WELD - Static variable in class nxopen.uf.UFConstants
-
- SLOT_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- slotAttributes() - Method in interface nxopen.die.KeywayBuilder
-
Returns the slot attributes
License requirements: None.
- SlotAttributesData() - Constructor for class nxopen.die.KeywayChildBuilder.SlotAttributesData
-
- SlotAttributesData() - Constructor for class nxopen.die.KeywayParentBuilder.SlotAttributesData
-
- slotDepth() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the slot depth
License requirements: None.
- slotEndFacesAttributes() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the attributes for the end faces of the slot
License requirements: None.
- slotFace - Variable in class nxopen.uf.UFModl.SmslotData
-
- slotFacesAttributes() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the attributes for the slot faces
License requirements: None.
- SLOTHOR - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType
-
- SLOTHOR - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType
-
- slotLength() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the length of the slot
License requirements: None.
- slotLength() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the slot length
License requirements: None.
- slotRadius() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the radius of the back cutout
License requirements: None.
- slots() - Method in interface nxopen.cae.PostScenarioBuilder
-
- SLOTVER - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType
-
- SLOTVER - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType
-
- slotWidth() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the width of the slot
License requirements: None.
- slotWidth() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the slot width
License requirements: None.
- SLOW - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
-
Small stepsize
- SLOW - Static variable in class nxopen.MovieSettingsBuilder.PlaybackSpeedChoices
-
Specifies slow playback speed (half of record speed)
- SLOW - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationConvergenceSpeedType
-
Slow convergence speed
- slowdownDistanceOption() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the slowdown distance option
License requirements: None.
- slowdownPercent() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the slowdown percentage.
- SLUG - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepMassUnitType
-
Mass unit of slug or (LBF-SEC^2)/FT
- slugEdgeForTypeTwo() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the slug edge for type two
License requirements: None.
- slugHoleDiameterIncrement() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the slug hole diameter increment of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- slugHoleDiameterIncrement() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the slug hole diameter increment of pierce holes
License requirements: ug_die_design ("Die Design")
.
- slugHoleHeightLinearDimension() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the slug hole height linear dimension
License requirements: None.
- slugHoleHeightLinearDimension() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the slug hole height linear dimension
License requirements: None.
- slugHoleHeightLinearDimension() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the slug hole height linear dimension
License requirements: None.
- slugHoleOffset() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the slug hole offset of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- slugHoleOffset() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the slug hole offset of pierce holes
License requirements: ug_die_design ("Die Design")
.
- slugholeProfile() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the list containing the inner profiles which need to offset.
- slugHoleProfile() - Method in interface nxopen.tooling.ShimInnerProfileSetBuilder
-
Returns the slug hole profile
License requirements: None.
- slugHoleProfileOffset() - Method in interface nxopen.tooling.ShimInnerProfileSetBuilder
-
Returns the slug hole profile offset
License requirements: None.
- slugPreviousParameterA() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the previous slug parameter A
License requirements: None.
- slugPreviousParameterC1() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the previous slug parameter C1
License requirements: None.
- slugPreviousParameterC2() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the previous slug parameter C2
License requirements: None.
- slugRetentionBooleanData() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the slug retention boolean data
License requirements: None.
- SlugRetentionBuilder - Interface in nxopen.tooling
-
- SlugRetentionBuilder.Types - Class in nxopen.tooling
-
the main type
- slugRetentionEdge() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the slug retention edge
License requirements: None.
- slugRetentionFeature() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the slug retention feature
License requirements: None.
- SMALL - Static variable in class nxopen.display.SelPref.SelectionRadius
-
selection ball size small
- SMALL - Static variable in class nxopen.display.TransientText.TextSize
-
- SMALL - Static variable in class nxopen.markup.Icon.Size
-
Small size
- SMALL - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.CagePolylineVertexSizes
-
- SMALL - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexSizeTypes
-
- SMALL - Static variable in class nxopen.preferences.VisualizationHandles.HandleSizeValue
-
Small Handle Size
- SMALL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextSize
-
- SMALL_ANGLE - Static variable in class nxopen.motion.BushingDefine.AngleCalculationOption
-
Small Angle
- SMALL_FILLED_ARROW_IN - Static variable in class nxopen.pid.OffSheetConnectorBuilder.StyleOption
-
- SMALL_FILLED_ARROW_IN - Static variable in class nxopen.pid.PreferencesOffSheetConnectorBuilder.StyleOption
-
- SMALL_FILLED_ARROW_OUT - Static variable in class nxopen.pid.OffSheetConnectorBuilder.StyleOption
-
- SMALL_FILLED_ARROW_OUT - Static variable in class nxopen.pid.PreferencesOffSheetConnectorBuilder.StyleOption
-
- SMALL_NUMBER_ITEMS - Static variable in class nxopen.cae.responsesimulation.RmsLcrEvaluationMethod
-
Small number of evaluation items
- SMALL_THAN - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Validator
-
the check passes if the check result is small than the criteria value
- SMALL_THAN_OR_EQUAL - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Validator
-
the check passes if the check result is equal or small than the criteria value
- SMALL_WHEEL - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- SMALL_WHEEL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- smallAngle - Variable in class nxopen.uf.UFModeling.AskVectorAngleData
-
- smallAreaAvoidance() - Method in interface nxopen.cam.MillCutParameters
-
Returns the small area avoidance
License requirements: None.
- SmallAreaAvoidance - Interface in nxopen.cam
-
Represents a SmallArea Builder .
- SmallAreaAvoidance.StatusTypes - Class in nxopen.cam
-
available types for Small Area Status
- smallAreaStatus() - Method in interface nxopen.cam.SmallAreaAvoidance
-
Returns the small area status
License requirements: None.
- SMALLEST_FACET - Static variable in class nxopen.facet.DecimateFacetBodyBuilder.DecimateMethodType
-
Smallest facet removes all facets smaller than the defined area, thus removing facets deemed to be redundant by the designer.
- smallFeature() - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Returns the small feature option.
- smallFeature() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
Returns the small feature option on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
- smallFeature() - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Returns the small feature option.
- smallFeature - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- smallFeature - Variable in class nxopen.uf.UFSf.UgsMeshAbstractionParams
-
- smallFeature - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- smallFeatureAutoSize() - Method in interface nxopen.cae.AutoHealGeometryBuilder
-
The autogenerate minimum element length button
License requirements: None.
- smallFeatures() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the small features
License requirements: None.
- smallFeaturesTolerance() - Method in interface nxopen.drawings.HiddenLinesViewStyle
-
Returns the value of small features tolerance.
- smallFeaturesTolerance() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
Returns the small features tolerance on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
- smallFeaturesTolerance() - Method in interface nxopen.preferences.HiddenLinesViewPreferences
-
Returns the value of small features tolerance.
- smallFeatureTolerance - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- SMART_DISTANCE - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- SMART_LIGHTWEIGHT - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ViewRepresentations
-
View representation mode Lightweight
- SMART_LIGHTWEIGHT - Static variable in class nxopen.preferences.GeneralViewRepresentationOption
-
Smart Lightweight
- SMART_OBJECT - Static variable in class nxopen.features.CopyPasteBuilder.ParentSelectOption
-
Selecting input for the original parent.
- SMART_POINT - Static variable in class nxopen.uf.UFDrf.AssocType
-
- SMART_PROJECTED_DISTANCE - Static variable in class nxopen.MeasureDistanceBuilder.DistanceType
-
- smartCollector() - Method in interface nxopen.features.ChamferBuilder
-
Returns the smart collector
License requirements: None.
- smartCsys - Variable in class nxopen.uf.UFModl.RoughOffset
-
- smartlightweightViewsLoadComponentOnDemand() - Method in interface nxopen.preferences.SessionDrafting
-
Returns the load on demand flag
License requirements: None.
- smartLod() - Method in interface nxopen.JtCreator
-
Returns the smartLOD * - Specifies wheather smart LOD generation is ON or OFF
License requirements: None.
- SmartObject - Interface in nxopen
-
Represents a smart object.
- SmartObject.UpdateOption - Class in nxopen
-
Specifies when the smart object updates.
- SmartObject.VisibilityOption - Class in nxopen
-
Specifies the smart object visibility.
- smartPoints - Variable in class nxopen.features.EdgeBlendBuilder.VariableRadiusData
-
Array of smart points defining variable radius
- smartPoints - Variable in class nxopen.features.EdgeBlendBuilder.VariableRadiusDataNewData
-
Array of smart points defining variable radius
- SmartRule - Interface in nxopen.features.shipdesign
-
Represents a smart rule feature.
- SmartRuleBuilder - Interface in nxopen.features.shipdesign
-
- SmartSaveBuilder - Interface in nxopen.pdm
-
TODO: Add a documentation comment describing this class.
- SmartSaveBuilder.SaveType - Class in nxopen.pdm
-
Represents an File Save type .
- SmartSaveContext - Interface in nxopen.pdm
-
- SmartSaveContext.WorkObjectToRootObjectMapData - Class in nxopen.pdm
-
- SmartSaveObject - Interface in nxopen.pdm
-
Represents the class for object participating in the smart save operation.
- SmartScrewUpdateBuilder - Interface in nxopen.tooling
-
Smart Screw Update of MW, PDW and EDW.
- SmartScrewUpdateBuilder.ParentOption - Class in nxopen.tooling
-
Specify the parent node.
- SmartScrewUpdateBuilder.Types - Class in nxopen.tooling
-
Specify the operation type.
- SmartSelectionManager - Interface in nxopen.cae
-
Provides methods for creating smart selection methods
in a cae part
To obtain an instance of this class, refer to
CaePart
Created in NX6.0.0
- smartSelectionMgr() - Method in interface nxopen.cae.CaePart
-
Returns the smart selection manager belonging to this part .
- smartUpdateOptionAsString() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the update option for points created by the point overlay.
- smartUpdateOptionAsString() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the update option for points created by the point overlay.
- smartUpdateOptionAsString() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Returns the SmartUpdateOption as string
License requirements: None.
- smartUpdateOptionAsString() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the update option for points created by the point overlay.
- smartUpdteOptionAsString() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
- smartVectors - Variable in class nxopen.uf.UFFbmGeom.AskAccessibilityVectorsData
-
- smartVolumeProfile() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the smart volume profile
License requirements: None.
- smartVolumeProfile() - Method in interface nxopen.features.RevolveBuilder
-
Returns the smart volume profile
License requirements: None.
- SmartVolumeProfileBuilder - Interface in nxopen.geometricutilities
-
This class contains the options for automatically closing the profile to surrounding model geometry.
- SmartVolumeProfileBuilder.CloseProfileRuleType - Class in nxopen.geometricutilities
-
the type of profile closures to be performed
- SmashComponentBuilder - Interface in nxopen.layout2d
-
Represents a Builder for Smash 2D Component functionality which will break instances
of 2D Components into its constituent pieces, we can have multiple committed objects
To create a new instance of this class, use
ComponentCollection.createSmashComponentBuilder()
Created in NX10.0.0
- SmashCustomSymbolBuilder - Interface in nxopen.annotations
-
- SmashDrawingViewBuilder - Interface in nxopen.drafting
-
- smashSymbol() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the smash symbol
License requirements: None.
- SMAW - Static variable in class nxopen.weld.PlugSlotBuilder.ArcProcessEnum
-
- SMBEND_BEND_ANGLE - Static variable in class nxopen.uf.UFModl.SmbendAngle
-
- SMBEND_BEND_AXIS - Static variable in class nxopen.uf.UFModl.SmbendCurve
-
- SMBEND_BEND_CENTERLINE - Static variable in class nxopen.uf.UFModl.SmbendCurve
-
- SMBEND_BEND_DIR_AS_SPECIFIED - Static variable in class nxopen.uf.UFModl.SmbendDirection
-
- SMBEND_BEND_DIR_OPPPOSITE_SIDE - Static variable in class nxopen.uf.UFModl.SmbendDirection
-
- SMBEND_BEND_TANGENT_LINE - Static variable in class nxopen.uf.UFModl.SmbendCurve
-
- SMBEND_CONTOUR_LINE - Static variable in class nxopen.uf.UFModl.SmbendCurve
-
- SMBEND_INCLUDED_ANGLE - Static variable in class nxopen.uf.UFModl.SmbendAngle
-
- SMBEND_INNER_RADIUS - Static variable in class nxopen.uf.UFModl.SmbendRadius
-
- SMBEND_INVALID_ANGLE_TYPE - Static variable in class nxopen.uf.UFModl.SmbendAngle
-
- SMBEND_INVALID_BEND_DIR - Static variable in class nxopen.uf.UFModl.SmbendDirection
-
- SMBEND_INVALID_CURVE_TYPE - Static variable in class nxopen.uf.UFModl.SmbendCurve
-
- SMBEND_INVALID_RADIUS_TYPE - Static variable in class nxopen.uf.UFModl.SmbendRadius
-
- SMBEND_INVALID_STAT_SIDE - Static variable in class nxopen.uf.UFModl.SmbendStatSide
-
- SMBEND_MOLD_LINE - Static variable in class nxopen.uf.UFModl.SmbendCurve
-
- SMBEND_NONE - Static variable in class nxopen.uf.UFModl.SmbendCurve
-
- SMBEND_NUM_ANGLE_TYPES - Static variable in class nxopen.uf.UFModl.SmbendAngle
-
- SMBEND_NUM_BEND_DIRS - Static variable in class nxopen.uf.UFModl.SmbendDirection
-
- SMBEND_NUM_CURVE_TYPES - Static variable in class nxopen.uf.UFModl.SmbendCurve
-
- SMBEND_NUM_RADIUS_TYPES - Static variable in class nxopen.uf.UFModl.SmbendRadius
-
- SMBEND_NUM_STAT_SIDES - Static variable in class nxopen.uf.UFModl.SmbendStatSide
-
- SMBEND_OUTER_RADIUS - Static variable in class nxopen.uf.UFModl.SmbendRadius
-
- SMBEND_STAT_SIDE_AS_SPECIFIED - Static variable in class nxopen.uf.UFModl.SmbendStatSide
-
- SMBEND_STAT_SIDE_OPPOSITE_SIDE - Static variable in class nxopen.uf.UFModl.SmbendStatSide
-
- SmbendCornerData() - Constructor for class nxopen.uf.UFModl.SmbendCornerData
-
- SmbendCornerData(Tag, String, UFModl.SmbendRadius, UFModl.SmbendStatSide, String) - Constructor for class nxopen.uf.UFModl.SmbendCornerData
-
- SmbendCylinderData() - Constructor for class nxopen.uf.UFModl.SmbendCylinderData
-
- SmbendCylinderData(Tag, UFModl.SmbendStatSide, String) - Constructor for class nxopen.uf.UFModl.SmbendCylinderData
-
- SmbendData() - Constructor for class nxopen.uf.UFModl.SmbendData
-
- SmbendData(Tag, Tag, UFModl.SmbendCurve, String, UFModl.SmbendAngle, String, UFModl.SmbendRadius, UFModl.SmbendDirection, UFModl.SmbendStatSide, String) - Constructor for class nxopen.uf.UFModl.SmbendData
-
- SMBoundaryConditionBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Boundary condition object for Metaform.
- SMBoundaryConditionBuilder.ConstraintTypes - Class in nxopen.features.sheetmetal
-
Types of Boundary condition constraints
- SMBoundaryConditionBuilderList - Interface in nxopen.features.sheetmetal
-
Represents a list of objects.
- smboundaryConditions() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the boundary conditions
License requirements: None.
- SmcornerData() - Constructor for class nxopen.uf.UFModl.SmcornerData
-
- SmcornerData(int, Tag, Tag, String, String, String, String, boolean, boolean, boolean, String, boolean) - Constructor for class nxopen.uf.UFModl.SmcornerData
-
- SmcutoutData() - Constructor for class nxopen.uf.UFModl.SmcutoutData
-
- SmcutoutData(Tag, int, Tag[], UFModl.SmholeDirectionType, double[], Tag, boolean, UFModl.SmcutoutType, Tag) - Constructor for class nxopen.uf.UFModl.SmcutoutData
-
- smd() - Method in interface nxopen.UFSession
-
- SmholeData() - Constructor for class nxopen.uf.UFModl.SmholeData
-
- SmholeData(String, String, String, Tag, String, Tag, String, Tag, Tag, Tag, UFModl.SmholeDirectionType, double[], UFModl.SmholeType) - Constructor for class nxopen.uf.UFModl.SmholeData
-
- SMITH_WATSON_TOPPER - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum
-
- SMITH_WATSON_TOPPER - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum
-
SWT
- SMITH_WATSON_TOPPER - Static variable in class nxopen.uf.UFSf.DursolFatigueLifeCriterion
-
- SmjoggleData() - Constructor for class nxopen.uf.UFModl.SmjoggleData
-
- SmjoggleData(Tag, Tag, Tag, Tag, Tag, Tag, double[], double[], int, double[], double[], boolean, String, String, String, String, String, boolean, boolean, String, String) - Constructor for class nxopen.uf.UFModl.SmjoggleData
-
- SMOKE_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- SMOOTH - Static variable in class nxopen.cam.LaserProfileMove.InterpMethods
-
Smooth
- SMOOTH - Static variable in class nxopen.cam.NcmEngRetBuilder.EngageRetractTypes
-
Smooth connections
- SMOOTH - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
smooth
- SMOOTH - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsWiths
-
smooth
- SMOOTH - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
Smooth
- SMOOTH - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes
-
Smooth connections
- SMOOTH - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
-
smooth
- SMOOTH - Static variable in class nxopen.cam.NcmTransferBuilder.TraverseTypes
-
traverse smooth spline
- SMOOTH - Static variable in class nxopen.cam.ToolAxisInterpolate.InterpolationMethodTypes
-
Smooth
- SMOOTH - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes
-
smooth transfer type
- SMOOTH - Static variable in class nxopen.facet.LocalOffsetBuilder.ShapeMethodType
-
Smooth specifies a transition region with smoothing.
- SMOOTH - Static variable in class nxopen.features.SpineCurveBuilder.ArcSegmentsTypes
-
- SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionBridgeFaceBuilder.ContinuityType
-
Smooth continuity
- SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionConnectCageBuilder.ContinuityTypes
-
- SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.ContinuityType
-
Smooth continuity
- SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionFillBuilder.ContinuityType
-
Smooth continuity
- SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionLoftBuilder.ContinuityType
-
Smooth continuity
- SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionRevolveBuilder.ContinuityType
-
Smooth continuity
- SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionSetContinuityBuilder.ContinuityTypes
-
- SMOOTH - Static variable in class nxopen.features.subdivision.SubdivisionSweepBuilder.ContinuityType
-
Smooth continuity
- smooth - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- SMOOTH_CONTOURS - Static variable in class nxopen.cae.Post.Style
-
- SMOOTH_EDGES_OFF - Static variable in class nxopen.uf.UFView.SmoothEdges
-
- SMOOTH_EDGES_ON - Static variable in class nxopen.uf.UFView.SmoothEdges
-
- SMOOTH_GRAY_SCALE - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Smooth gray scale.
- SMOOTH_OFF - Static variable in class nxopen.uf.UFDraw.Smooth
-
- SMOOTH_ON - Static variable in class nxopen.uf.UFDraw.Smooth
-
- SMOOTH_ROAD - Static variable in class nxopen.motion.TirePropertyTnoBuilder.ContactMethodType
-
- smoothArea() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the area to be smoothed
License requirements: None.
- smoothBSurf() - Method in interface nxopen.IgesImporter
-
Returns the smooth bsurf - set the flag to true if b-surfaced are required to be smoothed
License requirements: None.
- smoothBsurfaceData(int, int, double, double, UFModl.Bsurface) - Method in interface nxopen.uf.UFModlGeneral
-
- SmoothBsurfaceData() - Constructor for class nxopen.uf.UFModlGeneral.SmoothBsurfaceData
-
- smoothBSurfaces() - Method in interface nxopen.Step203Importer
-
Returns the Smooth B-Surfaces - if set to true smooth B-Surfaces
License requirements: None.
- smoothBSurfaces() - Method in interface nxopen.Step214Importer
-
Returns the Smooth B-Surfaces - if set to true smooth B-Surfaces
License requirements: None.
- smoothBSurfaces() - Method in interface nxopen.Step242Importer
-
Returns the Smooth B-Surfaces - if set to true smooth B-Surfaces
License requirements: None.
- smoothCornersAt() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the smooth corners at option.
- smoothCurve() - Method in interface nxopen.die.AddendumSectionBuilder
-
- SmoothCurveString - Interface in nxopen.features
-
Represents a smooth section feature
To create or edit an instance of this class, use
SmoothCurveStringBuilder
Created in NX9.0.0
- SmoothCurveStringBuilder - Interface in nxopen.features
-
- SmoothCurveStringBuilder.LevelTypes - Class in nxopen.features
-
the smoothing levels.
- SmoothCurveStringBuilder.MergeTypes - Class in nxopen.features
-
the options to merge curves after being made continuous.
- SmoothCurveStringBuilder.Types - Class in nxopen.features
-
the type of input curves.
- smoothCycles() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the number of smoothing cycles.
- smoothDisplayOption() - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Returns the source mesh option
License requirements: None.
- smoothEdge() - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Returns the status of smooth edge.
- smoothEdge() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
Returns the smooth edge toggle on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
- smoothEdge() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Returns the status of smooth edge.
- smoothEdgeAngleTolerance - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
Angle tolerance (in degrees)
attribute for visible smooth edges.
- smoothEdgeAngleTolerance - Variable in class nxopen.uf.UFView.EdgeDisplayOptions
-
- smoothEdgeAngleTolerance - Variable in class nxopen.uf.UFView.Visualization
-
- smoothEdgeColor() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the smooth edge color pick
License requirements: None.
- smoothEdgeColor() - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Returns the color of smooth edge.
- smoothEdgeColor() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Returns the color of smooth edge.
- smoothEdgeColor - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
Color attribute for visible smooth edges
- smoothEdgeColor - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions
-
Deprecated.
Color attribute for visible smooth edges
- smoothEdgeColor - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- smoothEdgeColor - Variable in class nxopen.uf.UFView.EdgeDisplayOptions
-
- smoothEdgeColor - Variable in class nxopen.uf.UFView.Visualization
-
- smoothEdgeEndGaps() - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Returns the status of smooth edge end gaps.
- smoothEdgeEndGaps() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Returns the status of smooth edge end gaps.
- smoothEdgeEndGapsData() - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Returns the value of smooth edge end gaps.
- smoothEdgeEndGapsData() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Returns the value of smooth edge end gaps.
- smoothEdgeFont() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the smooth edge line font
License requirements: None.
- smoothEdgeFont() - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Returns the font of smooth edge.
- smoothEdgeFont() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Returns the font of smooth edge.
- smoothEdgeFont - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
Font attribute for visible smooth edges
- smoothEdgeFont - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions
-
Deprecated.
Font attribute for visible smooth edges
- smoothEdgeFont - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- smoothEdgeFont - Variable in class nxopen.uf.UFView.EdgeDisplayOptions
-
- smoothEdgeFont - Variable in class nxopen.uf.UFView.Visualization
-
- smoothEdgeGap - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- smoothEdgeGapSize - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- smoothEdges() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to SmoothEdges .
- smoothEdges() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to SmoothEdges .
- smoothEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
Allows to control whether edges shared by
tangent faces display or not.
- smoothEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions
-
Deprecated.
Allows to control whether edges shared by
tangent faces display or not.
- smoothEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref
-
Deprecated.
Allows to control whether edges shared by
tangent faces display or not.
- smoothEdgesColor - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref
-
Deprecated.
Color attribute for visible smooth edges
- smoothEdgesFont - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref
-
Deprecated.
Font attribute for visible smooth edges
- smoothEdgesMode - Variable in class nxopen.uf.UFView.EdgeDisplayOptions
-
- smoothEdgesMode - Variable in class nxopen.uf.UFView.Visualization
-
- SmoothEdgesViewPreferences - Interface in nxopen.preferences
-
Represents set of Smooth Edges View Preferences applicable to drafting views.
- SmoothEdgesViewStyle - Interface in nxopen.drawings
-
Represents set of Smooth Edges View Style Preferences applicable to drafting views.
- smoothEdgesWidth - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref
-
Deprecated.
Width attribute for visible smooth edges
- smoothEdgeTolerance() - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Returns the status of smooth edge angle tolerance.
- smoothEdgeTolerance() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Returns the status of smooth edge angle tolerance.
- smoothEdgeToleranceData() - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Returns the value of smooth edge angle tolerance in degrees.
- smoothEdgeToleranceData() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Returns the value of smooth edge angle tolerance in degrees.
- smoothEdgeWidth() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the smooth edges line hidden font
License requirements: None.
- smoothEdgeWidth() - Method in interface nxopen.drawings.SmoothEdgesViewStyle
-
Returns the width of smooth edge.
- smoothEdgeWidth() - Method in interface nxopen.preferences.SmoothEdgesViewPreferences
-
Returns the width of smooth edge.
- smoothEdgeWidth - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions
-
Width attribute for visible smooth edges
- smoothEdgeWidth - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions
-
Deprecated.
Width attribute for visible smooth edges
- smoothEdgeWidth - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- smoothEdgeWidth - Variable in class nxopen.uf.UFView.EdgeDisplayOptions
-
- smoothEdgeWidth - Variable in class nxopen.uf.UFView.Visualization
-
- SmoothFacetBodyBuilder - Interface in nxopen.facet
-
- smoothFactor() - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
Returns the smoothing factor
License requirements: None.
- smoothFactor() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the smooth factor influences the smoothness of the surface
License requirements: None.
- smoothFactor() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit face smoothing factor
License requirements: None.
- smoothHeight() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the smooth height
License requirements: None.
- smoothing() - Method in interface nxopen.cam.GuidedCurveBuilder
-
Returns the option that specifies whether to smooth corners in tool path for guiding curves drive method.
- smoothing() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the smoothing
License requirements: cam_base ("CAM BASE")
.
- smoothing() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the smoothing
License requirements: cam_base ("CAM BASE")
.
- smoothing() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the curve smoothing method - linear (none), cubic or quintic
License requirements: None.
- smoothingBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the smoothing builder
License requirements: None.
- smoothingBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the smoothing builder
License requirements: None.
- smoothingFactor() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the smoothing factor regulates a trade-off between interpolation error and smoothing when creating the result body.
- smoothingFactor() - Method in interface nxopen.facet.CurvatureBuilder
-
Returns the smoothing factor
License requirements: None.
- smoothingFactor() - Method in interface nxopen.facet.FeatureExtractionBuilder
-
Returns the smoothing factor
License requirements: None.
- smoothingFactor() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the smoothing factor, the min and max values for this are (1 to 100)
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- smoothingFactor() - Method in interface nxopen.features.SmoothSplineBuilder
-
Returns the smoothing factor
License requirements: None.
- smoothingLevel() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the smoothing level parameter controls the amount of time spent smoothing and snapping in the wrapper engine
License requirements: None.
- smoothingMethod() - Method in interface nxopen.cam.InterpolateVector
-
Returns the smoothing method
License requirements: None.
- smoothingMethod() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the smoothing method
License requirements: None.
- smoothingOption() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the corner smoothing option
License requirements: None.
- smoothingOption() - Method in interface nxopen.cam.NcmScBuilder
-
- smoothingOption() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the smoothing option used in the transformation or morphing calculations
License requirements: None.
- smoothingRadius() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the smoothing radius settings
License requirements: None.
- smoothingRadius() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the smoothing radius
License requirements: None.
- smoothingRadiusBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
- smoothings() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Represents the smooth collection belonging to this optimization solution .
- smoothingTolerance() - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
Returns the smoothing tolerance
License requirements: None.
- smoothLeadinDistance() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Smooth Leadin Distance
License requirements: cam_base ("CAM BASE")
.
- smoothLeadInDistanceBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the smooth_lead_in_distance builder
License requirements: cam_base ("CAM BASE")
.
- smoothLeadinFlag() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Smooth Leadin Flag
License requirements: cam_base ("CAM BASE")
.
- smoothLeadInOption() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the Smooth Leadin Flag
License requirements: cam_base ("CAM BASE")
.
- smoothLeadInOption() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the Smooth Leadin Flag
License requirements: cam_base ("CAM BASE")
.
- smoothLeadoutDistance() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Smooth Leadout Distance
License requirements: cam_base ("CAM BASE")
.
- smoothLeadOutDistanceBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the smooth_lead_out_distance builder
License requirements: cam_base ("CAM BASE")
.
- smoothLeadOutDistanceBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the smooth_lead_out_distance builder
License requirements: cam_base ("CAM BASE")
.
- smoothLeadoutFlag() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Smooth Leadout Flag
License requirements: cam_base ("CAM BASE")
.
- smoothLeadOutOption() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the Smooth Leadout Flag
License requirements: cam_base ("CAM BASE")
.
- smoothLeadOutOption() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the Smooth Leadout Flag
License requirements: cam_base ("CAM BASE")
.
- smoothLength() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the smooth length
License requirements: None.
- smoothLevel() - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Returns the smooth level
License requirements: None.
- smoothness() - Method in interface nxopen.facet.BridgeFacetBodyBuilder
-
Returns the inserted facet smooth type
License requirements: None.
- smoothness() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the smoothness
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- smoothnessRealData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- smoothNormals() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the option to smooth the shell normals used for extrusion
License requirements: None.
- SmoothOptResultsBuilder - Interface in nxopen.cae
-
This builder is meant for optimization results related to material density.
- SmoothOptResultsBuilder.AdditionalSmoothingType - Class in nxopen.cae
-
Source mesh type
- smoothOptResultsCreateBuilder() - Method in interface nxopen.cae.SimSimulation
-
Creates a
SmoothOptResultsBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- smoothOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendData
-
- smoothOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- smoothRadius() - Method in interface nxopen.die.AddendumSectionBuilder
-
- smoothRange() - Method in interface nxopen.features.FlowBlendBuilder
-
Returns the smooth range object
License requirements: None.
- SmoothRangeBuilder - Interface in nxopen.features
-
- SmoothRangeBuilderList - Interface in nxopen.features
-
Represents a list of objects.
- smoothRangeFrom() - Method in interface nxopen.features.SmoothRangeBuilder
-
Returns the start point of smoothing range
License requirements: None.
- smoothRangeTo() - Method in interface nxopen.features.SmoothRangeBuilder
-
Returns the end point of smoothing range
License requirements: None.
- smoothRatio() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the neighbor normal weigth ratio for normal smoothing
License requirements: None.
- SmoothSpline - Interface in nxopen.features
-
Represents a smooth spline feature
To create or edit an instance of this class, use
SmoothSplineBuilder
Created in NX6.0.0
- SmoothSplineBuilder - Interface in nxopen.features
-
- SmoothSplineBuilder.Types - Class in nxopen.features
-
This enum represents the Smoothing Type option
- smoothSplineData(UFCurve.Spline, int, double, double) - Method in interface nxopen.uf.UFCurve
-
- SmoothSplineData() - Constructor for class nxopen.uf.UFCurve.SmoothSplineData
-
- smoothSplineDataSt(UFCurve.Spline, int, double[], double) - Method in interface nxopen.uf.UFCurve
-
- SmoothSplineDataStData() - Constructor for class nxopen.uf.UFCurve.SmoothSplineDataStData
-
- smoothSw - Variable in class nxopen.uf.UFSfLegend.IndexColorAttr
-
- smoothTolerance() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the tolerance used for cubic or quintic smoothing.
- smoothType() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the smooth type
License requirements: die_engineering ("DIE ENGINEERING")
.
- smoothType() - Method in interface nxopen.facet.FillHoleBuilder
-
Returns the boundary smoothness.
- SmpunchCutSets() - Constructor for class nxopen.uf.UFModl.SmpunchCutSets
-
- SmpunchCutSets(int, Tag[]) - Constructor for class nxopen.uf.UFModl.SmpunchCutSets
-
- SmpunchData() - Constructor for class nxopen.uf.UFModl.SmpunchData
-
- SmpunchData(UFModl.PunchType, UFModl.SmpunchTopType, UFModl.SmholeDirectionType, Tag, Tag, int, Tag[], int, UFModl.SmpunchCutSets[], Tag, String, String, String, String, String, double[], boolean, boolean, boolean) - Constructor for class nxopen.uf.UFModl.SmpunchData
-
- SmreliefData() - Constructor for class nxopen.uf.UFModl.SmreliefData
-
- SmreliefData(Tag, Tag[], Tag[], double[], String, String, String, String) - Constructor for class nxopen.uf.UFModl.SmreliefData
-
- SmslotData() - Constructor for class nxopen.uf.UFModl.SmslotData
-
- SmslotData(String, String, String, Tag, String, Tag, String, Tag, Tag, UFModl.SmholeDirectionType, Tag, double[], UFModl.SmholeDirectionType, Tag, double[], UFModl.SmslotType) - Constructor for class nxopen.uf.UFModl.SmslotData
-
- SNAP - Static variable in class nxopen.assemblies.AddComponentBuilder.LocationType
-
Snap as initial location type
- Snap3DModelsBuilder - Interface in nxopen.ame
-
- SNAP_ANGLE - Static variable in class nxopen.uf.UFConstants
-
- SNAP_TO_CLOSEST_NODE - Static variable in class nxopen.cae.QueryCurveUsageOptions.ResultantCurveLocatorType
-
- snapAngle() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
Returns the angle tolerance to snap to a location that allows a valid placement of an elbow.
- snapAngle() - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
Returns the snap angle
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
- snapAngle() - Method in interface nxopen.preferences.SessionSketch
-
Returns the snap angle.
- snapAngle - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
-
- snapAngle - Variable in class nxopen.uf.UFSket.AskPreferencesData
-
- snapAngleLimit() - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
Returns the snap angle limit for snapping the guide line direction to one of the WCS axis.
- snapEnds() - Method in interface nxopen.cae.EdgeSticherBuilder
-
Returns the snap ends value to snap to vertex at the end of edge
License requirements: None.
- snapFloorToggle() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the toggle forces the shadow plane to snap to the nearest object vertex
License requirements: None.
- snapLinks() - Method in interface nxopen.motion.JointDefine
-
Returns the option of snap links
License requirements: mechanisms ("MECHANISMS")
.
- snapLinks - Variable in class nxopen.uf.UFMotion.Joint
-
- SNAPPING_DIAMOND - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- SNAPPING_DIAMOND - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- snapPointsPerMinor() - Method in interface nxopen.display.GridBuilder
-
Returns the snap points per minor
License requirements: None.
- snapPointsPerMinor - Variable in class nxopen.preferences.WorkPlane.GridSize
-
Number of snap points between minor grid lines
- snapPointToGrid() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Returns the snap point to grid option.
- snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the SnapPointTypesEnabled
License requirements: None.
- snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the SnapPointTypesEnabled
License requirements: None.
- snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the SnapPointTypesEnabled
License requirements: None.
- snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the SnapPointTypesEnabled
License requirements: None.
- snapPointTypesEnabled() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the SnapPointTypesEnabled
License requirements: None.
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.AngularDimension
-
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.LinearDimension
-
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.OnPathDimension
-
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.RadiusDimension
-
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the SnapPointTypesOnByDefault
License requirements: None.
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the SnapPointTypesOnByDefault
License requirements: None.
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SpecifyOrientation
-
Returns the SnapPointTypesOnByDefault
License requirements: None.
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the SnapPointTypesOnByDefault
License requirements: None.
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the SnapPointTypesOnByDefault
License requirements: None.
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the SnapPointTypesOnByDefault
License requirements: None.
- snapPointTypesOnByDefault() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the SnapPointTypesOnByDefault
License requirements: None.
- snapRadius() - Method in interface nxopen.SketchDimensionBuilder
-
Returns the snap radius.
- snapRole() - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
Returns the role type
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- Snapshot - Interface in nxopen.dmu
-
- SNAPSHOT - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ComparisonBaseline
-
Deprecated.
- SNAPSHOT - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.BaselineOfComparisonType
-
- snapShot() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
- SNAPSHOT - Static variable in class nxopen.issue.IssueAttachment.Type
-
Snapshot type
- SNAPSHOT - Static variable in class nxopen.preferences.GeneralViewLockmethodOption
-
Snapshot
- Snapshot - Interface in nxopen.sim
-
Represents the Snapshot class object
Use the
Snapshot
class to create a Snapshot object.
- SNAPSHOT_AFTER_FIX - Static variable in class nxopen.issue.IssueFolder.Type
-
Snapshot after fix type
- SNAPSHOT_BEFORE_FIX - Static variable in class nxopen.issue.IssueFolder.Type
-
Snapshot before fix type
- SnapshotCollection - Interface in nxopen.dmu
-
Represents the collection object for all snapshot in a part.
- snapshotDataToUse() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the snapshot data to use
License requirements: None.
- SnapshotSubsetBuilder - Interface in nxopen.issue
-
Used to create or edit issue snapshot subset.
- SnapshotSubsetBuilder.ContextType - Class in nxopen.issue
-
The option specifying which kinds of issue snapshot subset should be created.
- snapshotView() - Method in interface nxopen.drawings.GeneralViewStyle
-
- snapshotView() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
- snapshotView() - Method in interface nxopen.preferences.GeneralViewPreferences
-
- SnapshotWorksetBuilder - Interface in nxopen.issue
-
Used to create or edit issue snapshot workset which is a container to hold all the corresponding
parts to represent an issue.
- snapSize() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the option to set the increment of the scale bar.
- SNAPTO_WCSAXIS - Static variable in class nxopen.tooling.MWDesignGuideLinesBuilder.DirectionType
-
Snap to WCS axis
- snapToClosestCannedOrientation() - Method in interface nxopen.View
-
Changes the orientation of the given view to the orientation of the canned
view whose orientation is the closest to that of the given view.
- snapToCutFaceTolerance() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the tolerance to snap nodes to the cutting face borders.
- snapToData() - Method in interface nxopen.cae.xyplot.MarkerStyleSetting
-
Returns the option specifies whether just to search source data when creating associative marker
License requirements: None.
- snapToElbowAngles() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
Returns the setting to determine whether to force the new control point to automatically snap to a location
that allows a valid placement of an elbow.
- snapToElbowAngles() - Method in interface nxopen.routing.ElbowSnapSettings
-
Returns whether or not to snap control points to the nearest valid elbow angle.
- snapToGrid() - Method in interface nxopen.display.GridBuilder
-
Returns the snap to grid
License requirements: None.
- snapToGrid() - Method in interface nxopen.preferences.WorkPlane
-
Returns the snap to grid flag.
- snapToGrid - Variable in class nxopen.uf.UFDisp.Grid
-
- snaptolerance - Variable in class nxopen.cae.FemPart.MeshPreferencesData
-
Snap Tolerance
- snapTolerance() - Method in interface nxopen.cae.ImprintBuilder
-
Returns the snap tolerance
License requirements: None.
- snapToSourceBoundaries() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the edge snapping to boundaries flag controls whether or not the generated surface wrap body should be projected on the input boundaries
License requirements: None.
- snapToVariantCannedOrientation() - Method in interface nxopen.View
-
Similar to
View.snapToClosestCannedOrientation()
except it
changes the orientation of the given view to the orientation of
some canned view "variant" based on I-deas's 'snapview' logic whose
orientation is the closest to one of the six orthographic and eight flavors
of trimetric views.
- snapType - Variable in class nxopen.ame.SelectAMEBaseNode.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.ame.SelectAMEPort.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.ame.SelectAspectNode.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.annotations.SelectAnnotation.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.annotations.SelectDimension.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.assemblies.SelectComponent.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.cae.SelectCAEBody.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.cae.SelectCAEEdge.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.cae.SelectCAEFace.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.cae.SelectFENode.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.cam.SelectCAMFeature.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.drawings.SelectDraftingView.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.drawings.SelectDrawingView.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.drawings.SelectSectionLine.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.facet.SelectFacetedBody.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.features.SelectFeature.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.features.SelectFlatPattern.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.features.SelectPartModule.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.layout2d.SelectComponent.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectBaseSection.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectControlPort.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectFieldData.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectJoint.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectLink.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectMarker.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectRoad.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.routing.SelectControlPoint.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.routing.SelectISegment.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.routing.SelectLineSegment.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.routing.SelectPort.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.routing.SelectRun.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.routing.SelectStock.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectBody.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectCoordinateSystem.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectCurve.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectDatumPlane.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectDisplayableObject.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectEdge.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectFace.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectGroup.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectIBaseCurve.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectIBody.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectICurve.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectIParameterizedSurface.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectIReferenceAxis.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectISurface.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectLine.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectNXObject.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectObject.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectPart.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectPoint.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectSketch.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectSmartObject.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectSpline.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectTaggedObject.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.SelectView.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.weld.SelectDatumPin.ValueWithSnapData
-
snap point type
- snapType - Variable in class nxopen.weld.SelectDatumSurface.ValueWithSnapData
-
snap point type
- SNIP_AT_PLANE - Static variable in class nxopen.facet.SnipFacetBodyBuilder.Types
-
Snip at plane
- SNIP_AT_PLANE - Static variable in class nxopen.features.SnipSurfaceBuilder.Types
-
- SNIP_BY_BOUNDARY - Static variable in class nxopen.facet.SnipFacetBodyBuilder.Types
-
Snip by boundary
- SNIP_BY_REGION - Static variable in class nxopen.facet.SnipFacetBodyBuilder.Types
-
Snip by region
- SNIP_CURVE - Static variable in class nxopen.features.SnipSurfaceBuilder.Types
-
- SNIP_FACETS - Static variable in class nxopen.facet.SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod
-
Snip scarred facets by the border
- SNIP_SURFACE - Static variable in class nxopen.features.SnipSurfaceBuilder.Types
-
- SNIP_WITH_CURVES - Static variable in class nxopen.facet.SnipFacetBodyBuilder.Types
-
Snip with curves
- snipCvString - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- SNIPED - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes
-
- SNIPED - Static variable in class nxopen.features.shipdesign.EndCutBuilder.ConnectionTypes
-
If this Connection Type is set, the offset parameter can be used.
- SNIPED - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes
-
- SNIPED_SQUARE - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes
-
- SNIPED_SQUARE - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes
-
- SnipFacetBodyBuilder - Interface in nxopen.facet
-
- SnipFacetBodyBuilder.BoundaryFacetTreatmentMethod - Class in nxopen.facet
-
Boundary facet treatment type:
- SnipFacetBodyBuilder.DirectionType - Class in nxopen.facet
-
Snipping direction when snipping type "by profiles"
- SnipFacetBodyBuilder.Types - Class in nxopen.facet
-
Snip method
- SnipIntoPatchesBuilder - Interface in nxopen.geometricutilities
-
- snipOrDivide - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- snippingCurve() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the snipping curve
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- snippingObject() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the snipping object
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- snippingPlane() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the snipping plane
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- snippingPlane - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- SnipsrfFeatureData() - Constructor for class nxopen.uf.UFModl.SnipsrfFeatureData
-
- SnipsrfFeatureData(Tag, UFModl.SnipsurfBoundaryType, UFModl.StringList, Tag, double[], int, double[], int, UFModl.SnipsurfRefitMethod, int, int, double[]) - Constructor for class nxopen.uf.UFModl.SnipsrfFeatureData
-
- SNIPSURF_BOUNDARY_TYPE_CURVES - Static variable in class nxopen.uf.UFModl.SnipsurfBoundaryType
-
- SNIPSURF_BOUNDARY_TYPE_PLANE - Static variable in class nxopen.uf.UFModl.SnipsurfBoundaryType
-
- SNIPSURF_REFIT_METHOD_DEG_PATCH - Static variable in class nxopen.uf.UFModl.SnipsurfRefitMethod
-
- SNIPSURF_REFIT_METHOD_DEG_TOL - Static variable in class nxopen.uf.UFModl.SnipsurfRefitMethod
-
- SNIPSURF_REFIT_METHOD_NONE - Static variable in class nxopen.uf.UFModl.SnipsurfRefitMethod
-
- SNIPSURF_REFIT_METHOD_PATCH_TOL - Static variable in class nxopen.uf.UFModl.SnipsurfRefitMethod
-
- SnipSurface - Interface in nxopen.features
-
Represents a snip surface feature
To create or edit an instance of this class, use
SnipSurfaceBuilder
Created in NX6.0.0
- SnipSurfaceBuilder - Interface in nxopen.features
-
- SnipSurfaceBuilder.Types - Class in nxopen.features
-
Snip method added in v 7.5.0
- snipSurfaceIntoPatches(Face) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
-
Snip the selected surface into patches
License requirements: None.
- so() - Method in interface nxopen.UFSession
-
- SoaQuery - Interface in nxopen.pdm
-
Represents search soa query to perform Teamcenter search .
- SOCKET - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes
-
Socket joint for pipe welding.
- SOCKET_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- socketColorFontWidth() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the color, font, and width of the socket joint curves.
- soCsys - Variable in class nxopen.uf.UFModeling.AskScaleData
-
- soCsys - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData
-
- SODERBERG - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum
-
- SODERBERG - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum
-
Soderberg
- soDir - Variable in class nxopen.uf.UFModeling.AskScaleData
-
- soDir - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData
-
- SOFT - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType
-
- SOFT - Static variable in class nxopen.cam.Tool.Types
-
- SOFT - Static variable in class nxopen.HumanPosturePredictionBuilder.CushionFirmnessType
-
Indicate soft cushion
- SOFT - Static variable in class nxopen.preferences.SessionModeling.SurfaceExtensionOption
-
- SOFT_EDGED - Static variable in class nxopen.display.ImageBasedLighting.ShadowsType
-
Soft-edged,approximated shadows will be generated using a shadow
mapping algorithm.
- SOFT_EDGED - Static variable in class nxopen.display.LightBuilder.ShadowType
-
Soft-edged,approximated shadows will be generated using a shadow
mapping algorithm.
- SoftBlend - Interface in nxopen.features
-
Represents a Soft Blend feature.
- softenVertices - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- softShadowsBiasOffset() - Method in interface nxopen.display.Shadows
-
Returns the Soft Shadows bias offset
License requirements: None.
- softShadowsEdges() - Method in interface nxopen.display.Shadows
-
Returns the Soft Shadows edges (softness)
License requirements: None.
- softShadowsEnabled() - Method in interface nxopen.display.Shadows
-
Returns the Soft Shadows
License requirements: None.
- softShadowsGradientClamp() - Method in interface nxopen.display.Shadows
-
Returns the Soft Shadows gradient clamp
License requirements: None.
- softShadowsQuality() - Method in interface nxopen.display.Shadows
-
Returns the Soft Shadows quality
License requirements: None.
- softShadowsToggle() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the soft shadows toggle
License requirements: None.
- SoftTool - Interface in nxopen.cam
-
Represents a SoftTool
This is an abstract class, and cannot be instantiated.
- SOFTWARE - Static variable in class nxopen.preferences.PartVisualizationLine.LineFontDisplayType
-
- softwareProperties() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
Returns the flag indicating whether to export software properties for components
License requirements: None.
- SOIL - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.SurfType
-
- SOLAR_VIEW_FACTOR - Static variable in class nxopen.cae.Result.Quantity
-
- SOLDERED_JOINT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- SOLDERED_JOINT - Static variable in class nxopen.annotations.Symbol
-
Specifies soldered joint weld symbol
- SOLID - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
-
Solid type
- SOLID - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont
-
Solid Line
- SOLID - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Object
-
solid
- SOLID - Static variable in class nxopen.cae.DisplaySectionType
-
- SOLID - Static variable in class nxopen.cae.ElementCreateBuilder.ElemDimType
-
solid, types currently supported through UI
- SOLID - Static variable in class nxopen.cae.ElementReflectBuilder.ElemDimType
-
only solid
- SOLID - Static variable in class nxopen.cae.ElementRotateBuilder.ElemDimensionType
-
only solid elements can be selected
- SOLID - Static variable in class nxopen.cae.ElementTranslateBuilder.ElemDimensionType
-
only solid elements can be selected
- SOLID - Static variable in class nxopen.cae.LaminateExtrudeSetupBuilder.SamcefElementTypeEnum
-
Solid.
- SOLID - Static variable in class nxopen.cae.LaminateFillSetupBuilder.SamcefElementTypeEnum
-
Solid.
- SOLID - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
-
3-d
- SOLID - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
-
Solid font
- SOLID - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisLineFont
-
Solid font
- SOLID - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
-
Solid font
- SOLID - Static variable in class nxopen.cae.Post.MarkRenderStyle
-
- SOLID - Static variable in class nxopen.cae.ReassignElementsBuilder.ElementDimensionOption
-
3-d
- SOLID - Static variable in class nxopen.cam.Tool.Types
-
Solid tool
- SOLID - Static variable in class nxopen.die.ClearanceBuilder.ClearanceGeometryTypes
-
The input is solids.
- SOLID - Static variable in class nxopen.display.GridBuilder.LineStyleType
-
- SOLID - Static variable in class nxopen.DisplayableObject.ObjectFont
-
- SOLID - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font
-
Solid
- SOLID - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
-
Deprecated.
- SOLID - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
- SOLID - Static variable in class nxopen.features.GlobalShapingBuilder.BodyMethod
-
Output solid
- SOLID - Static variable in class nxopen.features.OvercrownBuilder.OutputType
-
- SOLID - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.PropertyType
-
Solid analysis
- SOLID - Static variable in class nxopen.features.SectionSurfaceBuilderEx.BodyType
-
solid type
- SOLID - Static variable in class nxopen.features.SewBuilder.Types
-
Solid
- SOLID - Static variable in class nxopen.features.shipdesign.PlateBoundaryOptionBuilder.BoundaryTypes
-
use
Body
as the boundary.
- SOLID - Static variable in class nxopen.features.ThroughCurveMeshBuilder.BodyPreferenceTypes
-
Solid
- SOLID - Static variable in class nxopen.features.ThroughCurvesBuilder.BodyPreferenceTypes
-
Solid
- SOLID - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
Solid Font
- SOLID - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
-
Solid
- SOLID - Static variable in class nxopen.geometricutilities.FeatureOptions.BodyStyle
-
Solid Body
- SOLID - Static variable in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType
-
Use solid steering wheel or pedal
- SOLID - Static variable in class nxopen.LineFontBuilder.LineFontType
-
Solid line font
- SOLID - Static variable in class nxopen.mechatronics.CamBuilder.CreateCamDiskType
-
Solid
- SOLID - Static variable in class nxopen.motion.BodyContactRecurdyn.ContactType
-
- SOLID - Static variable in class nxopen.preferences.Font
-
Solid
- SOLID - Static variable in class nxopen.preferences.PartDrafting.FontType
-
Solid
- SOLID - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
-
- SOLID - Static variable in class nxopen.preferences.PartObject.LineFontType
-
Solid
- SOLID - Static variable in class nxopen.preferences.SessionModeling.BodyTypeOption
-
Indicates Body Type is solid
- SOLID - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
-
- SOLID - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
- SOLID - Static variable in class nxopen.Print3dBuilder.PrintInfillEnum
-
- SOLID - Static variable in class nxopen.tooling.PocketBuilder.ToolType
-
solid
- SOLID - Static variable in class nxopen.uf.UFConstants
-
- SOLID - Static variable in class nxopen.ViewDependentDisplayManager.Font
-
- SOLID - Static variable in class nxopen.weld.WeldFeatureOutput
-
Output only solids
- solid1 - Variable in class nxopen.uf.UFMotion.Interference
-
- solid2 - Variable in class nxopen.uf.UFMotion.Interference
-
- SOLID_ASSEMBLY - Static variable in class nxopen.cam.GougeCheckBuilder.ToolShapeType
-
use solid assembly
- SOLID_BASED - Static variable in class nxopen.tooling.ValidCheckBuilder.AnalysisMode
-
Solid body will be used to do checking
- SOLID_BODIES - Static variable in class nxopen.blockstyler.SelectObject.FilterType
-
Filter to select all solid bodies
- SOLID_BODIES - Static variable in class nxopen.cam.Preferences.SelectionTypes
-
solid bodies
- SOLID_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide solid bodies
- SOLID_BODY - Static variable in class nxopen.facet.FacetedBody.FacetedbodyType
-
- SOLID_BODY - Static variable in class nxopen.features.shipdesign.PlateBuilder.BodyTypes
-
Outputs a plate as a solid body.
- SOLID_BODY - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.TireDefinitionOption
-
Use a solid body.
- SOLID_BODY - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType
-
- SOLID_BODY - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType
-
- SOLID_BODY_INTERSECTION - Static variable in class nxopen.tooling.RunSimulationBuilder.CollisionCheckOptions
-
Get the solid body, use intersection boolean result to do collision check
- SOLID_CENTER - Static variable in class nxopen.cam.DisplayPath.PathDisplayTypes
-
Path Display: Solid Center
- SOLID_CENTER - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathDisplayTypes
-
Path Display: Solid Center
- SOLID_CONE - Static variable in class nxopen.weld.WeldCustom
-
creates a cone
- SOLID_CYLINDER - Static variable in class nxopen.weld.WeldCustom
-
creates a cylinder
- SOLID_DEFAULT - Static variable in class nxopen.weld.WeldCustom
-
creates a default solid
- SOLID_ELEMENT - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 3D element
- SOLID_FACE_COLORS - Static variable in class nxopen.cae.modelcheck.ReverseShellElementNormalBuilder.DisplayTypeValue
-
- SOLID_FILL - Static variable in class nxopen.annotations.AreaFillMaterial
-
Solid fill
- SOLID_FILL - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
-
- SOLID_FIRST_DIRECTION - Static variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType
-
the first direction of solid element material orientation
- SOLID_INTER_LAMINAR_FAILURE_INDEX - Static variable in class nxopen.cae.Result.Quantity
-
- SOLID_LAMINATE_FAILURE_INDEX - Static variable in class nxopen.cae.Result.Quantity
-
- SOLID_LASER_HEAD - Static variable in class nxopen.cam.LaserProfileMove.CollisionChecks
-
Solid Laser Head
- SOLID_NONE - Static variable in class nxopen.weld.WeldCustom
-
creates only a point
- SOLID_OBJECT_NOT_ALIVE - Static variable in class nxopen.uf.UFConstants
-
- SOLID_OWNING_PART - Static variable in class nxopen.tooling.SubInsertBuilder.Types
-
The parent part is the owning part of solid
- SOLID_PATCH - Static variable in class nxopen.tooling.SolidPatchBuilder.SolidPatchType
-
Solid patch type indicates to create solid patch
- SOLID_PLY - Static variable in class nxopen.cae.LaminateExtrudeSetupBuilder.SamcefElementTypeEnum
-
Solid Ply.
- SOLID_PLY - Static variable in class nxopen.cae.LaminateFillSetupBuilder.SamcefElementTypeEnum
-
Solid Ply.
- SOLID_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide solid polygon bodies
- SOLID_REVOLVED_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- SOLID_ROD - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Solid Rod
- SOLID_ROD - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
- SOLID_ROD - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Solid Rod
- SOLID_SECOND_DIRECTION - Static variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType
-
the second direction of solid element material orientation
- SOLID_SHELL - Static variable in class nxopen.cae.LaminateExtrudeSetupBuilder.SamcefElementTypeEnum
-
Solid Shell.
- SOLID_SHELL - Static variable in class nxopen.cae.LaminateFillSetupBuilder.SamcefElementTypeEnum
-
Solid Shell.
- SOLID_SPHERE - Static variable in class nxopen.weld.WeldCustom
-
creates a sphere
- SOLID_THIRD_DIRECTION - Static variable in class nxopen.cae.modelcheck.ElementMaterialOrientationCheckBuilder.MaterialOrientationType
-
the third direction of solid element material orientation
- SOLID_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
-
- SOLID_TORUS_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- SOLID_TUBULAR - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Solid Tubular
- SOLID_TUBULAR - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
- SOLID_TUBULAR - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Solid Tubular
- solidBodies - Variable in class nxopen.cam.PreprocessGeometryBuilder.ObjectsData
-
the solid bodies
- SOLIDBODY - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Solid Body
- solidBody - Variable in class nxopen.uf.UFSf.MidsrfUserParms
-
- solidBodySel() - Method in interface nxopen.features.MidSurfaceUserDefinedBuilder
-
Returns the solid body for user defined midsurface
License requirements: None.
- solidBodySubtype - Variable in class nxopen.Selection.MaskTriple
-
Solid body subtype.
- solidCreation - Variable in class nxopen.uf.UFModl.AskExtrusionData
-
- solidCreation - Variable in class nxopen.uf.UFModl.AskRevolutionData
-
- SolidDensity - Interface in nxopen.geometricanalysis
-
- SolidDensity.UnitsType - Class in nxopen.geometricanalysis
-
Types of units for solid density
- SOLIDE - Static variable in class nxopen.Catiav4Creator.SolidBodyOutputOption
-
output NX solid bodies as SOLIDE in CATIA
- solidEdgeType() - Method in interface nxopen.Edge
-
Returns the solid type of the edge
License requirements: solid_modeling ("SOLIDS MODELING")
.
- SolidElementFaceNormalBuilder - Interface in nxopen.cae.modelcheck
-
- solidFace() - Method in interface nxopen.cae.UserDefinedSolidBeamSectionBuilder
-
Returns the solid face
License requirements: None.
- solidFaceType() - Method in interface nxopen.Face
-
Returns the Parasolid type of the face
License requirements: solid_modeling ("SOLIDS MODELING")
.
- SolidPatchBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to create a solid patch.
- SolidPatchBuilder.SolidPatchType - Class in nxopen.tooling
-
Settings of the solid patch creation types.
- SolidPatchCollection - Interface in nxopen.tooling
-
Represents a collection of SolidPatch builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- solidPatchs() - Method in interface nxopen.tooling.ToolingManager
-
Returns the SolidPatchCollection instance belonging to this part .
- solidProperty() - Method in interface nxopen.cae.LaminatePly
-
Returns the ply solid property
License requirements: None.
- SolidPropertyCheckBuilder - Interface in nxopen.cae
-
- SolidPropertyCheckBuilder.CoupledSolutionOutput - Class in nxopen.cae
-
Coupled Solution output option
- SolidPropertyCheckBuilder.UserUnit - Class in nxopen.cae
-
User Specified output unit
- SolidPunch - Interface in nxopen.features
-
Represents a Solid Punch feature
To create or edit an instance of this class, use
SolidPunchBuilder
Created in NX6.0.2
- SOLIDPUNCH - Static variable in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods
-
SolidPunch
- SolidPunchBuilder - Interface in nxopen.features.sheetmetal
-
- SolidPunchBuilder.Types - Class in nxopen.features.sheetmetal
-
Represents the punch type
- SolidPunchData() - Constructor for class nxopen.uf.UFModl.SolidPunchData
-
- SolidPunchData(int, int, String, Tag, Tag, Tag, Tag, int, Tag[], boolean) - Constructor for class nxopen.uf.UFModl.SolidPunchData
-
- SOLIDS - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.NodeElementOptionEnum
-
Solids
- SOLIDS - Static variable in class nxopen.cae.responsesimulation.NodalAveragingOption
-
- solids() - Method in interface nxopen.geometricanalysis.SolidDensity
-
Returns the solids to set density for
License requirements: None.
- solids() - Method in interface nxopen.ObjectTypeSelector
-
Returns the solids - This should be set to true if solids are desired in the output file
License requirements: None.
- SolidToolBuilder - Interface in nxopen.cam
-
Represents a SolidTool Builder
This is an abstract class, and cannot be instantiated.
- SolidTrackingBuilder - Interface in nxopen.cam
-
- SolidTrackPoint - Interface in nxopen.cam
-
Represents an Track Point
To obtain an instance of this class us
TrackPointCollection
Created in NX4.0.0
- solidType - Variable in class nxopen.uf.UFUi.Mask
-
- solidType() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the solid body type specified.
- solidType() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the output solid type.
- solution() - Method in interface nxopen.AutomaticTraceline
-
Returns the solution used in the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- solution() - Method in interface nxopen.cae.LaminateDynamicSimBuilder
-
Returns the solution
License requirements: None.
- solution() - Method in interface nxopen.cae.PreTestSolutionBuilder
-
Returns the pre-test working solution
License requirements: None.
- Solution - Interface in nxopen.cae.responsesimulation
-
Represents a meta solution providing response analysis functionalities in the .sim file
To create or edit an instance of this class, use
SolutionBuilder
Created in NX5.0.0
- solution() - Method in interface nxopen.cae.SimSolutionStep
-
Returns the solution to which the step belongs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- solution() - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Returns the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- solution() - Method in interface nxopen.cae.SolutionResult
-
Returns the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- solution() - Method in interface nxopen.motion.ResultMeasureBuilder
-
Returns the solution
License requirements: mechanisms ("MECHANISMS")
.
- solution - Variable in class nxopen.tooling.SIZERExportBuilder.MechanicalData
-
Motion solution
- SOLUTION_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- solutionAskDescriptorNx(Tag) - Method in interface nxopen.uf.UFSf
-
- solutionAskLanguageNx(Tag) - Method in interface nxopen.uf.UFSf
-
- solutionAskLbcDescValidNx(Tag, Tag) - Method in interface nxopen.uf.UFSfl
-
- solutionAskNameNx(Tag) - Method in interface nxopen.uf.UFSf
-
- solutionAskNthAllowableStepDescriptorNx(Tag, int) - Method in interface nxopen.uf.UFSfl
-
- solutionAskNthStepNx(Tag, int) - Method in interface nxopen.uf.UFSf
-
- solutionAskNumAllowableStepDescriptorsNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- solutionAskNumStepsNx(Tag) - Method in interface nxopen.uf.UFSf
-
- solutionAskPropertyByIndexNx(Tag, int) - Method in interface nxopen.uf.UFSf
-
- solutionAskPropertyCountNx(Tag) - Method in interface nxopen.uf.UFSf
-
- solutionAskPropertyNx(Tag, String) - Method in interface nxopen.uf.UFSf
-
- solutionAskSolverPropertyByIndexNx(Tag, int) - Method in interface nxopen.uf.UFSf
-
- solutionAskSolverPropertyCountNx(Tag) - Method in interface nxopen.uf.UFSf
-
- solutionAskSolverPropertyNx(Tag, String) - Method in interface nxopen.uf.UFSf
-
- solutionAskStepDescriptorNx(Tag, String) - Method in interface nxopen.uf.UFSfl
-
- SolutionAttributes - Interface in nxopen.cae.responsesimulation
-
Represents attributes setting of response analysis meta solution .
- SolutionBuilder - Interface in nxopen.cae.responsesimulation
-
This is a manager to the
Solution
class.
- SolutionCollection - Interface in nxopen.cae.responsesimulation
-
Represents a collection of response analysis meta solution
To obtain an instance of this class, refer to
Manager
Created in NX5.0.0
- solutionDescriptorAskNameNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- SOLUTIONLINE - Static variable in class nxopen.sim.MachineToolConfiguration.ControllerLines
-
The solutionline controller line
- SolutionManager - Interface in nxopen.cae
-
- solutionMergeOption() - Method in interface nxopen.cae.SolverAppendOption
-
- solutionName() - Method in interface nxopen.cae.SimMotionLoadsListItemBuilder
-
Returns the solution name
License requirements: None.
- solutionnames - Variable in class nxopen.cae.LaminatePostReportBuilder.SelectedSolutionsData
-
- solutionObject() - Method in interface nxopen.motion.GraphObjectBuilder
-
Returns the solution object who owns the graph object
License requirements: None.
- solutionPp - Variable in class nxopen.uf.UFSf.AskSolutionNxData
-
- SolutionResult - Interface in nxopen.cae
-
- solutions() - Method in interface nxopen.cae.CorrelManager
-
Returns the correl solution collection belonging to this sim part .
- solutions() - Method in interface nxopen.cae.DurSpecialistManager
-
- solutions() - Method in interface nxopen.cae.responsesimulation.Manager
-
Returns the Response Dynamics solution collection belonging to this sim part .
- solutions() - Method in interface nxopen.cae.SimSimulation
-
Returns the CAE Solution collection belonging to this sim part .
- solutionSetNameNx(Tag, String, boolean) - Method in interface nxopen.uf.UFSf
-
- solutionStepTag - Variable in class nxopen.uf.UFSf.AskLvNxData
-
- solutionTag - Variable in class nxopen.uf.UFSf.AskDursolNxData
-
- solutionType() - Method in interface nxopen.cae.SimSolution
-
Returns the solution type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- solutionType() - Method in interface nxopen.mfg.am.Nester3D
-
Returns the solution type
License requirements: None.
- solutionType() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the solution type
License requirements: None.
- solve() - Method in interface nxopen.cae.AdaptivityMetaSolution
-
Solves the optimization solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- SOLVE - Static variable in class nxopen.cae.DurabilityEventSolverBuilder.SubmitOptionsEnum
-
Solve
- SOLVE - Static variable in class nxopen.cae.DurabilitySolverBuilder.SubmitOptionsEnum
-
Solve
- solve() - Method in interface nxopen.cae.DurSpecialistSolution
-
Solve the Solution.
- solve(boolean) - Method in interface nxopen.cae.LaminateDynamicEvent
-
Solve the event.
- solve() - Method in interface nxopen.cae.optimization.DAOSolution
-
Solves the optimization solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- solve() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Solves the optimization solution
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- solve(SimSolution.SolveOption, SimSolution.SetupCheckOption) - Method in interface nxopen.cae.SimSolution
-
Solves the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- SOLVE - Static variable in class nxopen.cae.SimSolution.SolveOption
-
write solver input file and launch solve
- solve() - Method in interface nxopen.motion.SpreadsheetRunControl
-
SpreadsheetRun solve function
License requirements: mechanisms ("MECHANISMS")
.
- solve() - Method in interface nxopen.positioning.Network
-
Solves the constraint network.
- SOLVE_INPUT_FILE - Static variable in class nxopen.cae.SimSolution.SolveOption
-
launch solve with existing solver input file
- SOLVE_MODEL_QUALITY_RESULTS - Static variable in class nxopen.cae.SimSolution.SolveOption
-
solve model quality results
- solveActiveSolutionNx(int) - Method in interface nxopen.uf.UFSf
-
- solveAllMetaSolutions(SimSolution.SolveOption, SimSolution.SetupCheckOption, SimSolution.SolveMode, boolean) - Method in interface nxopen.cae.SimSolveManager
-
Solve all meta solutions in the sim document.
- SolveAllMetaSolutionsData() - Constructor for class nxopen.cae.SimSolveManager.SolveAllMetaSolutionsData
-
- solveAllPostponedConstraints() - Method in interface nxopen.PartCollection
-
Solves all the constraints, that have been postponed in their arrangement,
in every loaded part in the session.
- solveAllSolutions(SimSolution.SolveOption, SimSolution.SetupCheckOption, SimSolution.SolveMode, boolean) - Method in interface nxopen.cae.SimSolveManager
-
Solve all solutions in the sim document.
- SolveAllSolutionsData() - Constructor for class nxopen.cae.SimSolveManager.SolveAllSolutionsData
-
- solveChainOfSolutions(SimSolution[], SimSolution.SolveOption, SimSolution.SetupCheckOption, SimSolution.SolveMode) - Method in interface nxopen.cae.SimSolveManager
-
Solve the chain of solutions given in input.
- SolveChainOfSolutionsData() - Constructor for class nxopen.cae.SimSolveManager.SolveChainOfSolutionsData
-
- SOLVED - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
The constraint is solved and satisfied
- solveExciterConfig(PreTestExciterConfig) - Method in interface nxopen.cae.PreTestSolution
-
Solve exciter configuration
License requirements: nx_correl_base ("FE Correlation")
.
- solveModel(double, int) - Method in interface nxopen.uf.UFMotion
-
- solveNormalRunSolution() - Method in interface nxopen.motion.MotionSolution
-
Solve normal run solution.
- solveOptionsCollection() - Method in interface nxopen.cae.DurabilityManager
-
Returns the durability solve options collection belonging to this sim part.
- solvePlaces(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- SolvePlacesData() - Constructor for class nxopen.uf.UFRoute.SolvePlacesData
-
- solvePostponedConstraints() - Method in interface nxopen.assemblies.Arrangement
-
Forces a postponed
Arrangement
, that is not currently used in the session,
to solve its constraints.
- solvePostponedConstraints() - Method in interface nxopen.positioning.ComponentPositioner
-
Solves constraints in all arrangements that are currently postponing
their solve.
- solver() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the solver
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- Solver - Class in nxopen.cae.optimization
-
Represents the optimization solution solver type
- solver - Variable in class nxopen.uf.UFMotion.SolverParameters
-
- SOLVER_PLY_STRESSES_AND_STRAINS - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.SolverInputType
-
Using solver ply stresses
- SOLVER_SHELL_STRESS_RESULTANT - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.SolverInputType
-
Using solver shell stress resultants
- SOLVER_SPECIFIC - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis
-
Solver Specific Display
- SolverAndAnalysisTypeData() - Constructor for class nxopen.cae.BaseFemPart.SolverAndAnalysisTypeData
-
- SolverAppendOption - Interface in nxopen.cae
-
This class provides access to the append option setting for importing solver specific data into existing Fem/Sim
Not support KF.
- SolverAppendOption.ImportBehaviorOption - Class in nxopen.cae
-
Options to control how the imported input file is to be combined with the existing model
- SolverAppendOption.MergeOption - Class in nxopen.cae
-
Options to control how entities are merge with existing model
- SolverAppendOption.SolutionOption - Class in nxopen.cae
-
Options to control if a solution is created during merge
- solverCardNameDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the true/false flag based on whether the solver card name of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- solverConvergencyLevel() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the convergency level of onestep solver.
- solverConvergencyLevel() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the convergency level of onestep solver.
- solverDisplayMode() - Method in interface nxopen.cae.ModelDisplayBuilder
-
Returns the model's Solver Display Mode.
- solverDisplaySpringbackMode() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option for springback display.
- solverDoSpringbackCalculation() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to do springback calculation in onestep solver.
- solverGeometryType() - Method in interface nxopen.positioning.ConstraintReference
-
Returns
the geometry type of the constraint reference used during a solve.
- solverInput() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the solver input type
License requirements: None.
- solverInput() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the solver input
License requirements: None.
- solverJoinOutputCurves() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to join output curves.
- solverJoinOutputCurves() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the option to join output curves.
- solverMaxIterationSteps() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the maximum number of iteration steps in onestep solver.
- solverMaxIterationSteps() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the maximum number of iteration steps in onestep solver.
- solverName() - Method in interface nxopen.cae.NamedPropertyTable
-
Returns the solver of lanugage of the descriptor that defines the type of the property table in named property table holder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- solverName() - Method in interface nxopen.cae.SolverAppendOption
-
Returns the solver name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- solverName - Variable in class nxopen.uf.UFSf.AskLanguageData
-
- solverOptionsPropertyTable() - Method in interface nxopen.cae.SimSolution
-
Returns the property table associated with the solution's solver options
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- SolverParameters() - Constructor for class nxopen.uf.UFMotion.SolverParameters
-
- SolverParameters(UFMotion.Solver, double, double, int, int, int, int) - Constructor for class nxopen.uf.UFMotion.SolverParameters
-
- solverPlyStress() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
- solverResults() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the solver results
Activates specific CDTire results:
Integration step size (h);Time integration error (err);
License requirements: None.
- solverSaveAnalysisResultsIntoFeature() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to save analysis result into feature.
- solverSaveAnalysisResultsIntoFeature() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the option to save analysis result into feature.
- solverShellResultant() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
- solverType() - Method in interface nxopen.cae.optimization.DAOSolution
-
Returns the optimization solution solver type
License requirements: None.
- solverType() - Method in interface nxopen.cae.optimization.DAOSolutionBuilder
-
Returns the optimization solution solver type
License requirements: None.
- solverType() - Method in interface nxopen.cae.SimSolution
-
Returns the solver type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- solverTypeName - Variable in class nxopen.cae.BaseFemPart.SolverAndAnalysisTypeData
-
the name of the solver.
- solveSensorConfig(PreTestSensorConfig) - Method in interface nxopen.cae.PreTestSolution
-
Solve sensor configuration
License requirements: nx_correl_base ("FE Correlation")
.
- solveTest() - Method in interface nxopen.cae.optimization.TBSIOptimizationTest
-
Solves optimization test
License requirements: cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- solvingTolerance() - Method in interface nxopen.preferences.SessionSketch
-
Returns the sketch solving tolerance.
- solvingTolerance() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the sketch solving tolerance.
- SOME - Static variable in class nxopen.pdm.PartFromPartBuilder.FileSaveAs
-
save selected during save as
- SOME_CONSTRAINTS_NOT_TRANSFERRED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature curves have been converted, but without some constraints
- SOME_LOOPS_EXISTED - Static variable in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
Some loops existed in list
- soPoint - Variable in class nxopen.uf.UFModeling.AskScaleData
-
- soPoint - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData
-
- SORT - Static variable in class nxopen.blockstyler.Tree.NodeInsertOption
-
Node is sorted according to display text and placed accordingly in the hierarchy in which it is inserted
- sort2Access() - Method in interface nxopen.cae.DurabilityTransientEventBuilder
-
Returns the sort2 access.
- SORT_DIR_ASCENDING - Static variable in class nxopen.uf.UFTabnot.SortDirection
-
- SORT_DIR_DESCENDING - Static variable in class nxopen.uf.UFTabnot.SortDirection
-
- SORT_XCOORD - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum
-
Based on sorted X coordinates
- SORT_YCOORD - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum
-
Based on sorted Y coordinates
- SORT_ZCOORD - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum
-
Based on sorted Z coordinates
- SORTBY_CREATION - Static variable in class nxopen.ame.OrderAspectsBuilder.SortType
-
- SORTBY_NAME - Static variable in class nxopen.ame.OrderAspectsBuilder.SortType
-
- sortColumn() - Method in interface nxopen.annotations.BendTableSettingsBuilder
-
Returns the column that is used to sort the bend table
License requirements: drafting ("DRAFTING")
.
- sortColumn(int, BomListBuilder.BomListSortOption) - Method in interface nxopen.tooling.BomListBuilder
-
Sorts the given column.
- sortComponentByInterPartDependency() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Sort components by inter-part dependency and return dependency circles.
- SortComponentByInterPartDependencyData() - Constructor for class nxopen.features.shipdesign.MirrorShipStructureBuilder.SortComponentByInterPartDependencyData
-
- sortConnectionsPlugin(SortConnectionsPluginData) - Method in interface nxopen.routing.CustomManager.SortConnectionsPlugin
-
This defines the prototype for the sort connections plugin in which you can sort
the connections in the order Routing will route them along their paths.
- SortConnectionsPluginData - Interface in nxopen.routing.electrical
-
Data object created by Routing just before routing connections.
- SortData() - Constructor for class nxopen.uf.UFTabnot.SortData
-
- SortData(int, UFTabnot.SortDirection) - Constructor for class nxopen.uf.UFTabnot.SortData
-
- sortDirection - Variable in class nxopen.uf.UFTabnot.SortData
-
- sortFeatures(Tag, Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- sortFunctionMode() - Method in interface nxopen.ame.OrderAspectsBuilder
-
Returns
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- sortIndex - Variable in class nxopen.uf.UFTabnot.SortData
-
- sortingBlock() - Method in interface nxopen.ame.BaseEvaluatorBuilder
-
Returns the sorting block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SortingBlockBuilder - Interface in nxopen.ame
-
Sorts the list expression output according to the property .
- SortingBlockBuilder.Order - Class in nxopen.ame
-
possible choices for order selection
- sortLocationMode() - Method in interface nxopen.ame.OrderAspectsBuilder
-
Returns
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- sortOnUpdate() - Method in interface nxopen.annotations.BendTableSettingsBuilder
-
Returns the sort on update option
License requirements: drafting ("DRAFTING")
.
- sortOnUpdate() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the sort on update option that determines whether or not the parts list sorts automatically during update
License requirements: None.
- sortOnUpdate - Variable in class nxopen.uf.UFPlist.Prefs
-
- sortOrder() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the sorting order
License requirements: None.
- sortProductMode() - Method in interface nxopen.ame.OrderAspectsBuilder
-
Returns
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- sortRegions() - Method in interface nxopen.cam.CutRegionsData
-
Sort regions
License requirements: cam_base ("CAM BASE")
.
- sortRootNodes() - Method in interface nxopen.blockstyler.Tree
-
Returns the SortRootNodes.
- sortRset(UFVariant, String) - Method in interface nxopen.uf.UFLib
-
- sortType() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the sorting criteria
License requirements: None.
- sortValueType - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData
-
If want to sort value in x direction
- soTag - Variable in class nxopen.uf.UFGdt.GeometricDefinition
-
- SOUND_INSULATION - Static variable in class nxopen.annotations.AreaFillMaterial
-
Sound insulation
- SOUND_INSULATION - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
-
- SOUND_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- SOUNDINSULATION - Static variable in class nxopen.uf.UFDrf.ValidMaterial
-
- source() - Method in interface nxopen.ame.EditQueryBuilder
-
Returns the query name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- source - Variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairClearanceZoneData
-
the source of the clearance zone
- source - Variable in class nxopen.cae.ClippingParameters.SelectedCoordinateSystemData
-
- source - Variable in class nxopen.cae.ResultParameters.SelectedCoordinateSystemData
-
- source - Variable in class nxopen.cam.BlankIpw.SourceData
-
the blank IPW source
- SOURCE - Static variable in class nxopen.mechatronics.AlignBodyBuilder.RoleType
-
Source
- source() - Method in interface nxopen.mechatronics.ObjectSinkBuilder
-
Returns the source select.
- source() - Method in interface nxopen.mechatronics.ObjectTransformerBuilder
-
Returns the source select.
- source() - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder
-
Returns the source.
- source() - Method in interface nxopen.motion.AdoptionPair
-
Returns a source object
License requirements: mechanisms ("MECHANISMS")
.
- SOURCE - Static variable in class nxopen.routing.AssignTangencyBuilder.TangencySide
-
Assign tangency at source ControlPoint.
- source - Variable in class nxopen.uf.UFBrep.Mapping
-
- source - Variable in class nxopen.uf.UFClear.AskObjectClearZoneData
-
- source - Variable in class nxopen.uf.UFClear.AskPairClearZoneData
-
- SOURCE_ITEM - Static variable in class nxopen.assemblies.ComponentAssembly.CheckinCheckoutOption
-
Checks in or Checks out the source item that is referenced by a reuse design element or subordinate design element
- SOURCE_NOT_LOADED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature curves have been converted with no constraints, because the source part for the selected feature is not loaded
- SOURCE_SUPPRESSED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature curves have been converted with no constraints, because a source feature of the selected feature is suppressed.
- SOURCE_TARGET - Static variable in class nxopen.ame.ElectricalAnnotationSettingsBuilder.AnnotationAttrType
-
- SOURCE_TARGET - Static variable in class nxopen.ame.OpticalAnnotationSettingsBuilder.AnnotationAttrType
-
- SOURCE_TARGET - Static variable in class nxopen.cae.MeshFromBoundaryBuilder.LoopOption
-
source target
- SOURCE_TYPE_RECOGNIZED_FEATURE - Static variable in class nxopen.uf.UFMfm.SourceType
-
- SOURCE_TYPE_STANDARD_FEATURE - Static variable in class nxopen.uf.UFMfm.SourceType
-
- SOURCE_TYPE_TAGGED_ARC - Static variable in class nxopen.uf.UFMfm.SourceType
-
- SOURCE_TYPE_TAGGED_EDGE - Static variable in class nxopen.uf.UFMfm.SourceType
-
- SOURCE_TYPE_TAGGED_FACE - Static variable in class nxopen.uf.UFMfm.SourceType
-
- SOURCE_TYPE_TAGGED_POINT - Static variable in class nxopen.uf.UFMfm.SourceType
-
- SOURCE_TYPE_UNDEFINED - Static variable in class nxopen.uf.UFMfm.SourceType
-
- SOURCE_TYPE_USER_DEFINED_FEATURE - Static variable in class nxopen.uf.UFMfm.SourceType
-
- sourceBody() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder
-
Returns the select die engineering sheet bodies
License requirements: die_engineering ("DIE ENGINEERING")
.
- sourceBody - Variable in class nxopen.uf.UFWave.AskLinkMirrorData
-
- sourceBuilder() - Method in interface nxopen.CGMBuilder
-
Returns the Source builder.
- sourceBuilder() - Method in interface nxopen.PlotBuilder
-
Returns the Source builder.
- sourceBuilder() - Method in interface nxopen.PrintBuilder
-
Returns the Source builder.
- sourceBuilder() - Method in interface nxopen.PrintPDFBuilder
-
Returns the Source builder.
- sourceCollection() - Method in interface nxopen.cae.SimLoadRecipe
-
- sourceConnector() - Method in interface nxopen.linedesigner.ConnectionCreatorBuilder
-
Returns the source connector used in connection
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- SourceData() - Constructor for class nxopen.cam.BlankIpw.SourceData
-
- sourceDirection() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the source direction determines the orientation of the flattened surface.
- sourceDirection() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the source direction determines the orientation of the flattened surface.
- sourceedges - Variable in class nxopen.features.CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData
-
The array of source edges
- sourceEdgeSelection() - Method in interface nxopen.cae.EdgeSticherBuilder
-
Returns the source edge selection for Stitch Edge
License requirements: None.
- sourceEdgeSelection() - Method in interface nxopen.cae.UnStitchEdgeBuilder
-
Returns the source edge selection for un-stitch Edge
License requirements: None.
- sourceElement() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the source element that records which sheet element it is a copy of.
- sourceExpression() - Method in interface nxopen.ame.ReferenceObjectBuilder
-
Returns the expression that will determine the source object.
- sourceExpressions - Variable in class nxopen.InterpartExpressionsBuilder.ExpressionsData
-
array of source expressions
- sourceFace() - Method in interface nxopen.cae.Mesh3dHexBuilder
-
Returns the source face
License requirements: nx_masterfem ("Finite Element Modeling")
.
- sourceFace() - Method in interface nxopen.cae.MMCCreateBuilder
-
- sourceFaceList() - Method in interface nxopen.cae.Mesh3dHexBuilder
-
Returns the source face list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- sourcefaces - Variable in class nxopen.features.CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData
-
The array of source faces
- sourceFaces() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the source faces that will be used to calculate the mapping of being flattened
License requirements: None.
- sourceFaces() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the source faces that will be used to calculate the mapping of being flattened
License requirements: None.
- sourceFeature() - Method in interface nxopen.features.PaintParametersBuilder
-
Returns the source feature
License requirements: None.
- sourceFeatures() - Method in interface nxopen.shipdesign.ShipNavigatorNodeBuilder
-
Returns the list of features used to create ship navigator object node.
- sourceFile() - Method in interface nxopen.cae.DataSourceBuilder
-
Returns the selected input file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- sourceGeom - Variable in class nxopen.uf.UFWave.AskLinkedFeatureMapData
-
- sourceGroup() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the source group referenced by this connection
License requirements: nx_masterfem ("Finite Element Modeling")
.
- sourceGroupFilterType() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the filter type for source group selection
License requirements: None.
- sourceGroupReferenceState() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the state defining whether the source of this connection is defined with a group
License requirements: nx_masterfem ("Finite Element Modeling")
.
- sourceLabel() - Method in interface nxopen.cae.SimLoadRecipeSource
-
- sourceMesh() - Method in interface nxopen.cae.SurfaceCoatBuilder
-
Returns the selected source object(s)
License requirements: None.
- sourceName() - Method in interface nxopen.cae.DataSourceBuilder
-
Returns the data source name
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- sourceNode() - Method in interface nxopen.cae.MoveNodeBuilder
-
Returns the source node
License requirements: None.
- sourceNodes() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the source Node(s)
License requirements: None.
- sourceNodes() - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Returns the source nodes
License requirements: None.
- sourceObject() - Method in interface nxopen.ame.BulkConnectionBuilder
-
Returns the source object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- sourceObject() - Method in interface nxopen.ame.ConfigureResultTableBuilder
-
Returns the source object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- sourceObject() - Method in interface nxopen.ame.ExtractAttributeBaseBuilder
-
Returns the object to extract the attribute from
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- sourceObject() - Method in interface nxopen.ame.ReferenceObjectBuilder
-
Returns the selection for the object where the evaluation will start.
- sourceObject() - Method in interface nxopen.cae.DataSourceBuilder
-
Returns the selected source object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- sourceObject() - Method in interface nxopen.features.PaintParametersBuilder
-
Returns the source paintable object
License requirements: None.
- sourceObject() - Method in interface nxopen.tooling.DesignTrimToolBuilder
-
Returns the face or sheet body.
- sourceObject - Variable in class nxopen.uf.UFProcessAid.AskSourceObjectData
-
- sourceObjectHandle - Variable in class nxopen.uf.UFWave.AskBrokenLinkSourcePartData
-
- sourceObjects() - Method in interface nxopen.facet.BestFitAlignBuilder
-
Returns the source objects
License requirements: None.
- sourceobjects - Variable in class nxopen.pdm.SaveAsReviseCallbackData.SourceObjectsData
-
array of source objects to be saveas or revise
- SourceObjectsData() - Constructor for class nxopen.pdm.SaveAsReviseCallbackData.SourceObjectsData
-
- sourceOption() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the file type
License requirements: None.
- sourceOrigin() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the source origin is a point on one of the source face.
- sourceOrigin() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the source origin is a point on one of the source face.
- sourcePart() - Method in interface nxopen.annotations.PmiWaveLinkBuilder
-
Returns the source part for the WAVE link
License requirements: solid_modeling ("SOLIDS MODELING")
.
- sourcepart - Variable in class nxopen.cam.BlankIpw.SourceData
-
the part where the blank IPW source exists
- sourcePart() - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
Returns the source part
License requirements: None.
- sourcePart() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the source part file of the linked data.
- sourcePart() - Method in interface nxopen.LinkedMirrorPartAttributeEditData
-
Returns the source part
License requirements: None.
- sourcePartName - Variable in class nxopen.uf.UFWave.LinkedFeatureInfo
-
- sourcePartNameAttribute() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
Returns the Source part name
License requirements: None.
- sourcePartOccurrence() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the source part occurrence
License requirements: None.
- sourcePartOccurrence() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the source part occurrence
License requirements: None.
- sourcePartOccurrence() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the source part occurrence
License requirements: None.
- sourcePartOccurrence() - Method in interface nxopen.features.WaveDatumBuilder
-
Returns the source part occurrence
License requirements: None.
- sourcePartOccurrence() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
Returns the source part occurrence
License requirements: None.
- sourcePartOccurrence() - Method in interface nxopen.features.WavePointBuilder
-
Returns the source part occurrence
License requirements: None.
- sourcePartOccurrence() - Method in interface nxopen.features.WaveSketchBuilder
-
Returns the source part occurrence
License requirements: None.
- sourceParts() - Method in interface nxopen.shipdesign.ShipNavigatorNodeBuilder
-
Returns the list of parts used to create ship navigator part nodes.
- sourcePoint() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the source point .
- sourcePosition() - Method in interface nxopen.display.LightBuilder
-
Returns the source position - only applicable to spot and point light types
License requirements: None.
- sourceScope() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the current source scope.
- sourceSelection() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the selected source object(s)
License requirements: None.
- sourceTargetSeparator() - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
Returns the separator between source and target
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- sourceType() - Method in interface nxopen.cam.CAMFeature
-
Returns the source of the CAMFeature
License requirements: None.
- sourceType() - Method in interface nxopen.mechatronics.ObjectTransformerBuilder
-
Returns the option to transform source.
- sourceTypeSelection() - Method in interface nxopen.ame.ReferenceObjectBuilder
-
Returns the selection type for the source object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- sourceVDirection() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the secondary direction is the cross product of primary direction and source face normal
License requirements: None.
- sourceView() - Method in interface nxopen.drawings.SketchSectionLineBuilder
-
Returns the source view
License requirements: None.
- SP_CURVE - Static variable in class nxopen.Edge.EdgeType
-
SP curve edge
- SPACE_RESERVATION - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignStockSubType
-
Space Reservation stock subtype.
- SPACE_RESERVATION - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Space Reservation command.
- SPACE_RESERVATION - Static variable in class nxopen.routing.PathStockBuilder.AssignStockType
-
Space Reservation stock type.
- SPACE_RESERVATION - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter
-
Space Reservation
- SPACE_RESERVATION_AS_COMPONENT - Static variable in class nxopen.preferences.RoutingStock.SpaceReservationModeFlag
-
component created with solid body in the component
- SPACE_VIEW_FACTOR - Static variable in class nxopen.cae.Result.Quantity
-
- spaceBetweenCuts() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the distance between each cut.
- spaceBetweenFunctions() - Method in interface nxopen.cae.xyplot.DiagramDisplayStyles2DBarChart
-
Returns the space between functions measured in percentage.
- spaceBetweenItems() - Method in interface nxopen.cae.xyplot.DiagramDisplayStyles2DBarChart
-
Returns the space between items measured in percentage.
- spaceBetweenTextAndBar() - Method in interface nxopen.cae.xyplot.BarChartStyleSetting
-
Returns the spaces between text and bar measured in percentage.
- SPACED - Static variable in class nxopen.diagramming.DiagrammingConnectionlabelposition
-
Spaced
- spacedefinition - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
Type of bounding sphere (half or full)
- spaceFactor() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the space factor for the welding symbol
License requirements: None.
- spaceFactor - Variable in class nxopen.uf.UFDrf.ChamferDimensionData
-
- spaceFactor() - Method in interface nxopen.weld.WeldPmiBuilder
-
Returns the space factor.
- spaceMeth - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
-
- spacerAngle() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the spacer angle
License requirements: None.
- SpaceReservationBuilder - Interface in nxopen.routing
-
Represents a
SpaceReservationBuilder
This builder takes one or more segments and creates space reservation stock on it.
- spaceReservationMethodType() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Returns the method to determine which space reservation to assign.
- spaceReservationMode() - Method in interface nxopen.preferences.RoutingStock
-
Returns the space reservation creation mode
License requirements: routing_base ("Routing Basic")
.
- spaceReservationTranslucency() - Method in interface nxopen.preferences.RoutingStock
-
Returns the desired translucnecy of the newly created Space Reservation Stock
License requirements: routing_base ("Routing Basic")
.
- spacerOffset() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the spacer offset
License requirements: None.
- spaceSize() - Method in interface nxopen.preferences.PartVisualizationLine
-
Returns the space size.
- spaceSize - Variable in class nxopen.uf.UFDisp.SystemParams
-
- spaceType() - Method in interface nxopen.geometricutilities.PatternSpacing
-
Returns the type of spacing to be used by the pattern
License requirements: None.
- spacing() - Method in interface nxopen.cae.AfuAbscissaHeaderInfo
-
Returns the value of spacing
License requirements: None.
- spacing() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the spacing type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- spacing() - Method in interface nxopen.diagramming.tables.ContinuationDataBuilder
-
Returns the spacing between sections of a table.
- spacing() - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
Returns the spacing to use when spacing is enabled
License requirements: None.
- spacing() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the spacing (even distribution or custom defined)
License requirements: None.
- spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.CircularGridBuilder
-
Returns the spacing specification for the circular grid
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
Returns a value indicating the space between sections
License requirements: None.
- spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.IsoparametricBuilder
-
Returns a value indicating the space between sections
License requirements: None.
- spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder
-
Returns a value indicating the space between sections
License requirements: None.
- spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.QuadrilateralGridBuilder
-
Returns the spacing specification for the quadrilateral grid
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
Returns a value indicating the space between sections
License requirements: None.
- spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.TriangularGridBuilder
-
Returns the spacing specification for the triangular grid
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- spacing() - Method in interface nxopen.geometricanalysis.sectionanalysis.XYZPlaneBuilder
-
Returns a value indicating the space between sections
License requirements: None.
- spacing() - Method in interface nxopen.mfg.am.Nester3D
-
Returns the spacing between parts
License requirements: None.
- SPACING - Static variable in class nxopen.motion.CurveParameterizedTypes
-
User defined spacing type
- spacing() - Method in interface nxopen.weld.FilletBuilder
-
Returns the linear dimension spacing indicates distance between each weld.
- spacing() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the spacing to determine the points along the guide curve.
- spacing() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the spacing between welds
License requirements: ugweld ("UG WELD")
.
- SPACING_LENGTH - Static variable in class nxopen.weld.FilletBuilder.EnumSkipWeldMethod
-
- SPACING_LENGTH - Static variable in class nxopen.weld.WeldGrooveBuilder.SkipWeldMethod
-
Spacing and Length
- SPACING_PER_PANEL_COMBINATION - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
spacing per panel combination
- spacingAlongCurveType() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the type of spacing
License requirements: None.
- spacingCalculateMethod() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the project method type.
- spacingDistance() - Method in interface nxopen.weld.GrooveBuilder
-
- spacingElementSize() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the spacing element size
License requirements: nx_masterfem ("Finite Element Modeling")
.
- spacingExpression() - Method in interface nxopen.geometricutilities.PatternSpacingsListItem
-
Returns the spacing expression
License requirements: None.
- spacingExpression() - Method in interface nxopen.motion.PointOnCurveBuilder
-
Returns the user defined spacing
License requirements: None.
- spacingExpression() - Method in interface nxopen.routing.DuctReinforcementBuilder
-
Returns the distance between each pair of reinforcement
License requirements: routing_hvac ("Routing HVAC")
.
- spacingLength() - Method in interface nxopen.weld.WeldJointBuilder
-
- spacingMethod() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the spacing method.
- spacingMethod() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the spacing method.
- spacingNumber() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the spacing number
License requirements: ugweld ("UG WELD")
.
- spacingNumberOfElements() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the spacing number of elements
License requirements: nx_masterfem ("Finite Element Modeling")
.
- spacingOnPath() - Method in interface nxopen.geometricutilities.PatternSpacingsListItem
-
- spacingOption - Variable in class nxopen.routing.SegmentManager.SubdivideOption
-
Spacing Option
- spacingOption() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the spacing option.
- spacingReference() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the spacing reference direction.
- spacingsList() - Method in interface nxopen.geometricutilities.PatternSpacing
-
Returns the list of spacings (Expression or OnPathDimBuilder) to be used in this direction
License requirements: None.
- SPAN - Static variable in class nxopen.geometricutilities.PatternSpacing.SpacingType
-
Specify a distance for which all instances should occupy.
- spanAngle() - Method in interface nxopen.geometricutilities.AngularPatternSpacing
-
Returns the angle for the spacing of the pattern for the entire pattern.
- spanAngle() - Method in interface nxopen.geometricutilities.PolygonPatternSpacing
-
Returns the angle for the spacing of the pattern for the entire pattern.
- spanDistance() - Method in interface nxopen.geometricutilities.DistancePatternSpacing
-
Returns the distance for the spacing of the pattern for the entire pattern.
- spanMethod - Variable in class nxopen.uf.UFCurve.OcfData
-
- spareDialogForDragAndDrop() - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
Returns an API to check if spare dialog for drag and drop is allowed
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- SPARK - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
spark lens
- SPARK_PLUG - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Spark Plug
- SPARK_PLUG - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Spark Plug
- sparkGap() - Method in interface nxopen.tooling.UndersizeBuilder
-
Returns the spark gap which is the gap between the electrode head and the work piece
License requirements: None.
- SPARKING_BODY - Static variable in class nxopen.tooling.ElectrodeDeleteBuilder.Types
-
Delete sparking body from electrode.
- SPARKPLUG - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Spark Plug
- SPARSE_SOLVER - Static variable in class nxopen.uf.UFConstants
-
- SpatialMap - Interface in nxopen.fields
-
Represents the Field Domain Map
A Spatial Map provides a mapping from a field's independent domain into a new domain space.
- SpatialMap.BoundingBoxMapEnum - Class in nxopen.fields
-
Bounding Box Map
- SpatialMap.ParametricPlaneMapEnum - Class in nxopen.fields
-
Parametric Plane Map
- SpatialMap.SubtypeEnum - Class in nxopen.fields
-
Subtype of Spatial Map
- SpatialMap.SubtypeMappingEnum - Class in nxopen.fields
-
Subtype Mapping
- SpatialMap.TypeEnum - Class in nxopen.fields
-
Type of Spatial Map
- SpatialMapBuilder - Interface in nxopen.fields
-
- SpatialMapBuilder.CreateLatticeMapData - Class in nxopen.fields
-
- spatialResolution() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the maximum checking angle
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- spawn(String, int, String[], boolean) - Method in interface nxopen.uf.UFCfi
-
- spawnCheckStatus(int) - Method in interface nxopen.uf.UFCfi
-
- SpawnCheckStatusData() - Constructor for class nxopen.uf.UFCfi.SpawnCheckStatusData
-
- SPC - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.AutoFrozen
-
Elements with boundary conditions are excluded from the optimization
- spCurveTolerance() - Method in interface nxopen.NXTo2dCreator
-
Returns the sp curve tolerance
License requirements: None.
- SPECIAL_BASE - Static variable in class nxopen.uf.UFBrep.GeomType
-
- SPECIAL_CONTROL_INPUT - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- specialBaseView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the special base view
License requirements: None.
- specialEffectsVisualization() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Visualization Special Effects preferences settings applicable to entire session .
- SpecialFormingBuilder - Interface in nxopen.tooling
-
Creates special forming insert builder for progressive die.
- SpecialFormingBuilder.BlockType - Class in nxopen.tooling
-
the block type
- SpecialFormingBuilder.ParentValue - Class in nxopen.tooling
-
Specifies the main page type.
- SpecialFormingBuilder.PunchOrDie - Class in nxopen.tooling
-
Specifies the main page type.
- SpecialFormingBuilder.Types - Class in nxopen.tooling
-
Specifies the main page type.
- specialization() - Method in interface nxopen.FileNew
-
Returns the specialization for the new file
License requirements: None.
- SpecialPiercingInsertBuilder - Interface in nxopen.tooling
-
Creates special piercing insert for progressive die.No entity is returned.
- SpecialPiercingInsertBuilder.BoundBoxType - Class in nxopen.tooling
-
Specifies the bounded box type block or cylinder.
- SpecialPiercingInsertBuilder.InsertPositionTypes - Class in nxopen.tooling
-
Specifies the position of piercing inserts, for EDW only
- SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType - Class in nxopen.tooling
-
Specifies the type of bottom plate slug.
- SpecialPiercingInsertBuilder.NormalCavityType - Class in nxopen.tooling
-
Specifies the type of cavity.
- SpecialPiercingInsertBuilder.NormalDieShoeSlugType - Class in nxopen.tooling
-
Specifies the type of die shoe slug.
- SpecialPiercingInsertBuilder.NormalOffsetSideType - Class in nxopen.tooling
-
Specifies the offset side of normal pierce insert design.
- SpecialPiercingInsertBuilder.ParentPartTypes - Class in nxopen.tooling
-
Specifies the parent part type.
- SpecialPiercingInsertBuilder.PunchOrDieTypes - Class in nxopen.tooling
-
Specifies the parent part type.
- SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes - Class in nxopen.tooling
-
Specifies the parent part type.
- SpecialPiercingInsertBuilder.Types - Class in nxopen.tooling
-
Specifies the parent part type.
- SPECIFIC_CAPACITIVE_ENERGY - Static variable in class nxopen.cae.Result.Quantity
-
- SPECIFIC_CAPACITIVE_POWER - Static variable in class nxopen.cae.Result.Quantity
-
- SPECIFIC_HEAT - Static variable in class nxopen.cae.XyFunctionMeasure
-
specific heat
- SPECIFIC_HEAT_BTU_IN_LBF_SEC2DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Specific Heat unit:Btu inches per pound foot second squared Delta Fahrenheit
- SPECIFIC_HEAT_BTU_LBM_DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Specific Heat unit:Btu per pound mass per Delta Fahrenheit
- SPECIFIC_HEAT_JKG_DEGK - Static variable in class nxopen.cae.XyFunctionUnit
-
Specific Heat unit:Joules per Kilogram per Delta Kelvin
- SPECIFIC_HEAT_KJ_KG_DEGK - Static variable in class nxopen.cae.XyFunctionUnit
-
Specific Heat unit:kiloJoules per Kilogram per Delta Kelvin
- SPECIFIC_HEAT_LBFIN_IN_LBF_SEC2DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Specific Heat unit:pound force inch inch per pound foot second squared Delta Fahrenheit
- SPECIFIC_HEAT_LBFIN_LBM_DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Specific Heat unit:pound force inch per poundmass per Delta Fahrenheit
- SPECIFIC_HEAT_MICROJ_KG_DEGK - Static variable in class nxopen.cae.XyFunctionUnit
-
Specific Heat unit:microJoules per kilogram per Delta Kelvin
- SPECIFIC_HEAT_MJ_MG_DEGK - Static variable in class nxopen.cae.XyFunctionUnit
-
Specific Heat unit:milliJoules per Megagram per Delta Kelvin
- SPECIFIC_HUMIDITY - Static variable in class nxopen.cae.Result.Quantity
-
- SPECIFIC_NOTE - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI specific note type
- SPECIFIC_NOTE - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes
-
specific note
- SPECIFIC_NOTE_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- SPECIFIC_PART - Static variable in class nxopen.routing.RoutingBulkReplacementBuilderLibrarySelectSourceType
-
Library select source is a specific part
- SPECIFIC_PRODUCT - Static variable in class nxopen.tooldesigner.SelectDatumsBuilder.SearchOption
-
- SPECIFICATION - Static variable in class nxopen.CGMBuilder.RelationOption
-
Specification
- SPECIFICATION - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.RelationTypeEnum
-
- SPECIFICATION - Static variable in class nxopen.PrintPDFBuilder.RelationOption
-
Specification
- specificationChangedPlugin(String, String) - Method in interface nxopen.routing.CustomManager.SpecificationChangedPlugin
-
This defines the prototype for the Specification Changed plugin.
- specificationOption() - Method in interface nxopen.routing.DefineRunBuilder
-
Returns the specification of the run.
- specificationsAddConnectionCompatibility(String, String, String) - Method in interface nxopen.routing.ReuseLibrary
-
Adds a connection compatibility to the specification.
- specificationsAddGenericPostPlacement(String, String, String, String[]) - Method in interface nxopen.routing.ReuseLibrary
-
Add a generic post placmeent rule.
- specificationsDefinePostPlacementRules(String, ReuseLibrary.PartType, String, String[]) - Method in interface nxopen.routing.ReuseLibrary
-
Defines Post Placement rules.
- specificationsGetAttributeRelationships(String, String) - Method in interface nxopen.routing.ReuseLibrary
-
Gets the attribute relationships at a given library node.
- SpecificationsGetAttributeRelationshipsData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetAttributeRelationshipsData
-
- specificationsGetBranchTable(String) - Method in interface nxopen.routing.ReuseLibrary
-
Gets the branch compatibilities for the input specification.
- SpecificationsGetBranchTableData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetBranchTableData
-
- specificationsGetConnectionCompatibilities(String) - Method in interface nxopen.routing.ReuseLibrary
-
Get the list of connection compatibilities from the specificaiton.
- SpecificationsGetConnectionCompatibilitiesData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionCompatibilitiesData
-
- specificationsGetConnectionPostPlacement(String, String, String) - Method in interface nxopen.routing.ReuseLibrary
-
Get post placement options for a given connection.
- SpecificationsGetConnectionPostPlacementData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionPostPlacementData
-
- specificationsGetCurrent() - Method in interface nxopen.routing.ReuseLibrary
-
Returns the name of the current specification.
- specificationsGetDescription(String) - Method in interface nxopen.routing.ReuseLibrary
-
Gets the description of a specification.
- specificationsGetDisciplineSpecifications() - Method in interface nxopen.routing.ReuseLibrary
-
Returns the names of all of the specifications that are defined for the current discipline.
- specificationsGetGeneralConnectionOptions(String) - Method in interface nxopen.routing.ReuseLibrary
-
Gets the general connection options.
- SpecificationsGetGeneralConnectionOptionsData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData
-
- specificationsGetGenericPostPlacements(String) - Method in interface nxopen.routing.ReuseLibrary
-
Gets the defined generic post placement rules.
- SpecificationsGetGenericPostPlacementsData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetGenericPostPlacementsData
-
- specificationsGetGenericPostPlacementSearchAttributes(String, String, String) - Method in interface nxopen.routing.ReuseLibrary
-
Get the generic post placement search attributes.
- specificationsGetPostPlacementRules(String, ReuseLibrary.PartType) - Method in interface nxopen.routing.ReuseLibrary
-
Gets post placement rules.
- SpecificationsGetPostPlacementRulesData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetPostPlacementRulesData
-
- specificationsGetReportInBom(String) - Method in interface nxopen.routing.ReuseLibrary
-
Gets the Report in BOM flags.
- SpecificationsGetReportInBomData() - Constructor for class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData
-
- specificationsRemoveBranchCompatibility(String, double, double) - Method in interface nxopen.routing.ReuseLibrary
-
Removes a branch compatibility
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- specificationsRemoveConnectionCompatibility(String, String, String) - Method in interface nxopen.routing.ReuseLibrary
-
Removes a connection compatibility from the specification.
- specificationsRemoveGenericPostPlacement(String, String, String) - Method in interface nxopen.routing.ReuseLibrary
-
Remove a generic post placement option.
- specificationsSetAttributeRelationships(String, String, CharacteristicList) - Method in interface nxopen.routing.ReuseLibrary
-
Sets the attribute relationships for a specification.
- specificationsSetBranchCompatibility(String, double, double) - Method in interface nxopen.routing.ReuseLibrary
-
Sets a branch compatibility.
- specificationsSetConnectionPostPlacement(String, String, String, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.routing.ReuseLibrary
-
Set Connection post placement rules on a valid connection.
- specificationsSetDescription(String, String) - Method in interface nxopen.routing.ReuseLibrary
-
Sets the description text for a specification.
- specificationsSetGeneralConnectionOptions(String, boolean, boolean, double, double, double) - Method in interface nxopen.routing.ReuseLibrary
-
Sets the General Connection Options.
- specificationsSetReportInBom(String, boolean, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.routing.ReuseLibrary
-
Sets the report in BOM flags.
- specificColor() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Returns the specific color flag.
- SpecificNote - Interface in nxopen.annotations
-
Represents a Specific Note
To create or edit an instance of this class, use
SpecificNoteBuilder
Created in NX6.0.0
- SpecificNoteBuilder - Interface in nxopen.annotations
-
- specificPartialShade() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Returns the specific partial shade flag.
- specificTranslucency() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Returns the specific translucency flag.
- SPECIFIED - Static variable in class nxopen.cae.Post.MarkColor
-
- SPECIFIED - Static variable in class nxopen.cae.Post.MarkSize
-
- SPECIFIED - Static variable in class nxopen.cae.Post.StreamlineColor
-
- SPECIFIED - Static variable in class nxopen.cae.Post.Threshold
-
- SPECIFIED - Static variable in class nxopen.cam.FirstPlunge.Positions
-
Specify
- SPECIFIED - Static variable in class nxopen.features.HelixBuilder.OrientationOptions
-
Local coordinate system is specified by the user.
- SPECIFIED - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDomColorEnum
-
- SPECIFIED - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValueRange
-
- SPECIFIED - Static variable in class nxopen.motion.AddSubmechanismBuilder.Layer
-
custom specified layer
- SPECIFIED - Static variable in class nxopen.PartImporter.DestinationCoordinateSystemSpecificationType
-
Use specified coordinate system.
- SPECIFIED - Static variable in class nxopen.PasteSpecialBuilder.LayerOption
-
- SPECIFIED_ATTRIBUTES - Static variable in class nxopen.preferences.SessionAssemblies.PartNameOption
-
- SPECIFIED_COLOR - Static variable in class nxopen.visualreporting.GroupLabel.DisplayStyleOption
-
- SPECIFIED_CSYS - Static variable in class nxopen.IgesCreator.CsysrefEnum
-
export data with respect to specified CSYS
- SPECIFIED_DIRECTION - Static variable in class nxopen.features.GlobalShapingBuilder.DirectionMethodType
-
Overcrown is user specified direction
- SPECIFIED_DIRECTION - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionAlignments
-
specified direction
- SPECIFIED_LAYER - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.LayerOptions
-
Objects will be placed on a user specified layer
- SPECIFIED_LENGTH - Static variable in class nxopen.cae.Post.MarkMaximumSize
-
- SPECIFIED_LENGTH - Static variable in class nxopen.cae.Post.StreamlineSize
-
- SPECIFIED_NUMBER - Static variable in class nxopen.cae.WeldBuilder.NumberOfPointsOnEdgeType
-
Specify the number of points to be created on an edge
- SPECIFIED_POINTS - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes
-
Specified points
- SPECIFIED_PROJECTION_POINTS - Static variable in class nxopen.features.PointSetBuilder.CurvePointsType
-
Points will be created at minimum distance to curve.
- SPECIFIED_SPACE_RESERVATION - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.SpaceReservationMethod
-
sp selected from Specify Item dialog
- SPECIFIED_STOCK - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignMethod
-
Deprecated.
Stock selected from Specify Item dialog
- SPECIFIED_STOCK - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.StockMethod
-
Stock selected from Specify Item dialog
- SPECIFIED_STOCK - Static variable in class nxopen.routing.PathStockBuilder.AssignMethod
-
Stock selected from Specify Item dialog
- SPECIFIED_VALUE - Static variable in class nxopen.cae.Post.NoDataTreatment
-
- SPECIFIED_VECTOR - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.DirectionType
-
Use a user specified direction vector
- specifiedColor - Variable in class nxopen.cae.Post.Mark
-
- specifiedColor - Variable in class nxopen.cae.Post.Streamline
-
- specifiedDir - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- specifiedFillPercentage() - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
Returns the specified fill percentage expression
License requirements: routing_cabling ("Routing Cabling")
.
- specifiedLayer() - Method in interface nxopen.tooling.AddReusableFeatureBuilder
-
Returns the specified layer
License requirements: None.
- specifiedLengthValue - Variable in class nxopen.cae.Post.Mark
-
- specifiedLengthValue - Variable in class nxopen.cae.Post.Streamline
-
- specifiedMCF() - Method in interface nxopen.mechatronics.RuntimeNCBuilder
-
Returns the user specified MCF File.
- specifiedNumberOfPoints() - Method in interface nxopen.cae.WeldBuilder
-
Returns the maximum number of points on the edge(s) used to specify the location of the weld
License requirements: None.
- specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.CircularGridBuilder
-
Returns the user specified section plane
License requirements: None.
- specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
Returns the user specified project plane
License requirements: None.
- specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.ParallelPlanesExBuilder
-
Returns the user specified section plane
License requirements: None.
- specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.QuadrilateralGridBuilder
-
Returns the user specified section plane
License requirements: None.
- specifiedPlane() - Method in interface nxopen.geometricanalysis.sectionanalysis.TriangularGridBuilder
-
Returns the user specified section plane
License requirements: None.
- specifiedRotationPoint() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
Returns the rotation point
License requirements: None.
- specifiedWallThicknessDim() - Method in interface nxopen.features.StepBuilder
-
Returns the wall thickness dimension
License requirements: None.
- SPECIFY - Static variable in class nxopen.cae.CorrelAlignmentBuilder.ScalingChoice
-
User specified scaling factor
- SPECIFY - Static variable in class nxopen.cae.DurabilityDataControlBuilder.TimeExtentsEnum
-
Specify
- SPECIFY - Static variable in class nxopen.cae.DurSpecialistLocalDefinitionBuilder.LocationType
-
Specify location
- SPECIFY - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.SecondaryVectorType
-
specify
- SPECIFY - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
-
- SPECIFY - Static variable in class nxopen.cam.AreaMillingNonSteepContainment.AutoPatCenterTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.BladeCutLevels.RangeDepthTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.BladeEdge.EdgeDefinitionType
-
specify
- SPECIFY - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.FeedType
-
- SPECIFY - Static variable in class nxopen.cam.BoundaryTurnMemberFeed.FeedType
-
- SPECIFY - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishOffset.StatusValue
-
- SPECIFY - Static variable in class nxopen.cam.BoundaryTurnVariableStockSet.FeedType
-
- SPECIFY - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.StartPositionTypes
-
Start Position: Specify
- SPECIFY - Static variable in class nxopen.cam.CutAngle.Types
-
User Defined
- SPECIFY - Static variable in class nxopen.cam.CutParametersToolRunOffTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.DmAmBuilder.AutoPatCenterTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.DPMItpBuilder.SelectionMethodOption
-
specify
- SPECIFY - Static variable in class nxopen.cam.EditSubopCommand.PointTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.GeometryGroup.DirectionTypes
-
derived blank direction using user defined
- SPECIFY - Static variable in class nxopen.cam.GeometryGroup.OrientationTypes
-
derived blank orientation using user defined
- SPECIFY - Static variable in class nxopen.cam.GeometrySet.LoopsIgnoreTypes
-
Deprecated.
specify
- SPECIFY - Static variable in class nxopen.cam.HoleBossGeom.FormPitchTypes
-
Form and Pitch: Specify
- SPECIFY - Static variable in class nxopen.cam.InitialProfilePlunge.Modes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.InPathEventDataBuilder.LocationMethod
-
Uses Point to define the InPath Events Location
- SPECIFY - Static variable in class nxopen.cam.InspectionMoveBuilder.TipAngleTypes
-
Manual specify
- SPECIFY - Static variable in class nxopen.cam.InspectionMoveBuilder.TipModeTypes
-
Manual specify
- SPECIFY - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Angle
-
specify a angle
- SPECIFY - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Line
-
specify a line
- SPECIFY - Static variable in class nxopen.cam.LaserControlPoint.HeadOrientTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.LaserHeadOrientation.Types
-
Specify
- SPECIFY - Static variable in class nxopen.cam.LaserPiercingPoint.Types
-
Specify
- SPECIFY - Static variable in class nxopen.cam.LeadAngles.ControlTypes
-
specify
- SPECIFY - Static variable in class nxopen.cam.MachinePocketGroupBuilder.RegisterType
-
Deprecated.
use specify
- SPECIFY - Static variable in class nxopen.cam.MinCutDepth.Types
-
Specify
- SPECIFY - Static variable in class nxopen.cam.MinCutLength.Types
-
Specify
- SPECIFY - Static variable in class nxopen.cam.MultiBladeGeomBuilder.PartAxisOfRotationTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.NcmAvoidancePointBuilder.ToolAxisUsages
-
tool axis active
- SPECIFY - Static variable in class nxopen.cam.NcmSmoothingBuilder.SmoothToleranceSources
-
specify tolerance type
- SPECIFY - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepToolAxisOptions
-
tool axis as specified
- SPECIFY - Static variable in class nxopen.cam.NcmWedmBuilder.GlobalStopPointMethodTypes
-
stop points specified
- SPECIFY - Static variable in class nxopen.cam.OffsetDataBuilder.OffsetDirectionMethod
-
along a vector
- SPECIFY - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PatternDisplayTypes
-
Pattern Display: Specify
- SPECIFY - Static variable in class nxopen.cam.OperationTransformBuilder.Angle
-
specify a angle
- SPECIFY - Static variable in class nxopen.cam.OperationTransformBuilder.Line
-
specify a line
- SPECIFY - Static variable in class nxopen.cam.PartAxisBuilder.PartAxisOfRotationTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Depth
-
Specify distance
- SPECIFY - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Depth
-
Specify distance
- SPECIFY - Static variable in class nxopen.cam.RotaryFinishGeomBuilder.PartAxisOfRotationTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.RoughFinishTurningBuilder.ExtendModeTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinimumAreaTypes
-
Old NX6 item
- SPECIFY - Static variable in class nxopen.cam.RoughTurningBuilder.LevelDepthModeTypes
-
Level depth mode: Specify
- SPECIFY - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffPositionModeTypes
-
Part Off Position Mode: Specify
- SPECIFY - Static variable in class nxopen.cam.SurfaceContourBuilder.AccessVectorMethodType
-
user specified
- SPECIFY - Static variable in class nxopen.cam.ThreadTurningBuilder.InfeedLengthTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.ThreadTurningBuilder.InfeedModes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.ToolAxisTilt.TiltAngleTypes
-
User specifies the tilt angle
- SPECIFY - Static variable in class nxopen.cam.ToolAxisVariable.MaximumLeadAngleTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.ToolAxisVariable.NominalLeadAngleTypes
-
Specify
- SPECIFY - Static variable in class nxopen.cam.ToolPathEditorBuilder.ClearanceMethodType
-
- SPECIFY - Static variable in class nxopen.cam.TurnConcaveCornerControl.RadiusOptions
-
Concave Corner Control radius option is Specify.
- SPECIFY - Static variable in class nxopen.cam.TurnRoughFinishTestCut.StockModeTypes
-
Test Cut Stock Mode: Specify
- SPECIFY - Static variable in class nxopen.cam.WedmGeomBuilder.SmoothLeadInTypes
-
smooth leadin type specify
- SPECIFY - Static variable in class nxopen.cam.WedmGeomBuilder.SmoothLeadOutTypes
-
smooth leadin type specify
- SPECIFY - Static variable in class nxopen.cam.WedmGeomBuilder.StopPointFlagTypes
-
stop point option specify
- SPECIFY - Static variable in class nxopen.cam.WedmOperationBuilder.SmoothLeadInTypes
-
smooth leadin type specify
- SPECIFY - Static variable in class nxopen.cam.WedmOperationBuilder.SmoothLeadOutTypes
-
smooth leadin type specify
- SPECIFY - Static variable in class nxopen.cam.WedmOperationBuilder.StopPointFlagTypes
-
stop point option specify
- SPECIFY - Static variable in class nxopen.cam.WedmPointDefinitionBuilder.PointStates
-
specify wedm point
- SPECIFY - Static variable in class nxopen.cam.WedmPointDefinitionBuilder.WireAxisStates
-
wire axis vector
- SPECIFY - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.DistanceFromViewPlaneOption
-
specify distance
- SPECIFY - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.Option
-
Deprecated.
specify
- SPECIFY - Static variable in class nxopen.features.EmbossJoggle.JoggleDirectionMethod
-
Indicates joggle direction to along user specified direction
- SPECIFY - Static variable in class nxopen.sim.KinematicComponentBuilder.RegisterTypes
-
the register is specified
- SPECIFY - Static variable in class nxopen.userdefinedtemplate.InstantiationBuilder.JaUserdefinedtemplateLayerOption
-
Outputs will be in user specified layer
- SPECIFY_ANGLE - Static variable in class nxopen.cam.SplitSubopCommand.LinePlaneTypes
-
Line plane specify angle
- SPECIFY_ANGLE - Static variable in class nxopen.sim.KinematicComponentBuilder.WorkPositionAngleTypes
-
angle is specified
- SPECIFY_ANGLESAND_TIP - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType
-
Manually specify probe angles and probe tip
- SPECIFY_COLOR - Static variable in class nxopen.features.ColorFeatureBuilder.OperationType
-
assign color to feature
- SPECIFY_COLOR - Static variable in class nxopen.features.ColorFeatureGroupBuilder.OperationType
-
assign color to feature
- SPECIFY_COLOR - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedFaceEdge
-
Specified Color
- SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.CustomBracketBuilder.CreationMethod
-
- SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
-
a csys is used to place this cutout
- SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
-
- SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.ShipCutoutBuilder.CreationMethod
-
a csys is used to place this cutout
- SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.ShipEndCutBuilder.CreationMethod
-
a csys is used to place this endcut
- SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.SteelSupportBuilder.CreationMethod
-
- SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.WeldCut2Builder.CreationMethod
-
- SPECIFY_CSYS - Static variable in class nxopen.features.shipdesign.WeldCutBuilder.CreationMethod
-
- SPECIFY_DAMPING - Static variable in class nxopen.cae.CorrelSolutionBuilder.EnumDampingFrftype
-
from user input
- SPECIFY_DOF_VALUES - Static variable in class nxopen.cae.ConflictResolutionBuilder.Rule
-
specify dof values on the intersection
- SPECIFY_DOF_VALUES - Static variable in class nxopen.cae.ConstraintResolutionBuilder.Rule
-
Deprecated.
specify dof values on the intersection
- SPECIFY_FEATURES - Static variable in class nxopen.cam.GroupFeatures.FeaturesToGroupTypes
-
- SPECIFY_FILTER - Static variable in class nxopen.LoadOptions.LoadComponents
-
display list of pre-defined component groups to select from
- SPECIFY_INDEX - Static variable in class nxopen.cae.NodalForceReportBuilder.LoadcaseSelection
-
- SPECIFY_INDEX - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
- SPECIFY_INDEX - Static variable in class nxopen.cae.ResultProbeBuilder.LoadcaseSelection
-
- SPECIFY_INTERIOR_POSITION - Static variable in class nxopen.features.OffsetSurfaceBuilder.OrientationMethodType
-
- SPECIFY_LINE - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
-
- SPECIFY_LINE - Static variable in class nxopen.features.shipdesign.SteelSupportBuilder.CreationMethod
-
- SPECIFY_PLANE - Static variable in class nxopen.drawings.AssociativeAngleBuilder.EvaluationPlaneType
-
- SPECIFY_PLANE - Static variable in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectOptions
-
Define plane
- SPECIFY_PLANE - Static variable in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectOptions
-
Define plane
- SPECIFY_POINT - Static variable in class nxopen.OriginMethod
-
Specify Point
- SPECIFY_POINT - Static variable in class nxopen.tooling.WireHoleBuilder.Types
-
- SPECIFY_PROBE_ANGLES - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType
-
Manually specify probe angles
- SPECIFY_PROBE_TIP - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType
-
Manually specify probe tip
- SPECIFY_RANGE - Static variable in class nxopen.cae.ResultProbeBuilder.IterationSelection
-
- SPECIFY_SENSOR - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorSelectModeType
-
Manually specify sensor
- SPECIFY_VECTOR - Static variable in class nxopen.geometricanalysis.CurveAnalysisCombsBuilder.DirectionOptionType
-
Deprecated.
specify vector
- SPECIFY_VECTOR - Static variable in class nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder.DirectionOptionType
-
Deprecated.
specify vector
- SPECIFY_VECTOR - Static variable in class nxopen.geometricanalysis.CurveAnalysisPeaksBuilder.DirectionOptionType
-
Deprecated.
specify vector
- SPECIFY_VECTOR - Static variable in class nxopen.geometricanalysis.CurveAnalysisRecord.DirectionOptionType
-
Deprecated.
specify vector
- SpecifyAxis - Interface in nxopen.blockstyler
-
Represents a Specify Axis block .
- specifyBaffle() - Method in interface nxopen.tooling.ToolingManager
-
Returns the SpecifyBaffleCollection instance belonging to this part .
- SpecifyBaffleBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to create specify baffle.
- SpecifyBaffleBuilder.AttributeTypes - Class in nxopen.tooling
-
Types to specify how to assign attributes to the selected body.
- SpecifyBaffleBuilder.ChannelColorData - Class in nxopen.tooling
-
- SpecifyBaffleCollection - Interface in nxopen.tooling
-
Represents a collection of Specify Baffle builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- specifyBlend() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the flag of treating all input faces as blend, don't use it until further notification
License requirements: None.
- specifyCircuit() - Method in interface nxopen.tooling.ToolingManager
-
Returns the SpecifyCircuitCollection instance belonging to this part .
- SpecifyCircuitBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to create specify circuit.
- SpecifyCircuitCollection - Interface in nxopen.tooling
-
Represents a collection of Specify Circuit builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- specifyClearanceDataFile() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the name and full path of specified file.
- specifyClsf(String) - Method in interface nxopen.cam.DmTpBuilder
-
Specifies the clsf file, including both the directory path and file name.
- specifyColor() - Method in interface nxopen.features.ColorFeatureBuilder
-
Returns the specified color option.
- specifyConfiguration(String) - Method in interface nxopen.cam.CAMSession
-
Specify the configuration file of the current cam session
License requirements: cam_base ("CAM BASE")
.
- specifyContinuation() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the continuation
License requirements: None.
- specifyConvexFacets - Variable in class nxopen.facet.FacetingParameters
-
This indicates that the facets
generated by the faceter should all be
convex (this does not apply to JT).
- specifyConvexFacets - Variable in class nxopen.uf.UFFacet.Parameters
-
- SpecifyCSYS - Interface in nxopen.blockstyler
-
Represents a Specify CSYS block .
- specifyCsys(String, int, Tag) - Method in interface nxopen.uf.UFUi
-
- SpecifyCsysData() - Constructor for class nxopen.uf.UFUi.SpecifyCsysData
-
- SpecifyCsysReturn - Variable in class nxopen.uf.UFUi.SpecifyCsysData
-
- specifyCurves() - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilder
-
Returns the specify curves
License requirements: None.
- specifyCurveTolerance - Variable in class nxopen.facet.FacetingParameters
-
This indicates that values are to be
specified for curveDistanceTolerance
and curveAngularTolerance and
curve_max_length.
- specifyCurveTolerance - Variable in class nxopen.uf.UFFacet.Parameters
-
- SpecifyDateBuilder - Interface in nxopen.visualreporting
-
- specifyDieTip() - Method in interface nxopen.tooling.LayoutManagementBuilder
-
Returns the specify die tip to define the forming direction
License requirements: None.
- specifyDirection() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the initial flow direction.
- specifyDistance() - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
Returns the specify distance
License requirements: None.
- specifyDrawingSheet(String, String) - Method in interface nxopen.cam.WorkInstructionBuilder
-
Specify a drawing sheet in a component
License requirements: None.
- specifyElementSize() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the specify element size flag.
- specifyFace() - Method in interface nxopen.ame.MountingInterfaceBuilder
-
Returns the specify face
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- specifyFloorPlane() - Method in interface nxopen.display.Stage
-
Returns the specify floor plane
License requirements: None.
- specifyGroundPlane() - Method in interface nxopen.display.EnvironmentBuilder
-
Returns the specify ground plane
License requirements: None.
- specifyLine() - Method in interface nxopen.ame.MountingInterfaceBuilder
-
Returns the specify line
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SpecifyLocation - Interface in nxopen.blockstyler
-
Represents a Specify Location block .
- specifyMaxFacetSize - Variable in class nxopen.uf.UFFacet.Parameters
-
- specifyMaximumFacetSize - Variable in class nxopen.facet.FacetingParameters
-
This indicates that a maximum width of
facet is to be specified using
maximumFacetSize.
- SpecifyOrientation - Interface in nxopen.blockstyler
-
Represents Specify Orientation block .
- specifyParameters - Variable in class nxopen.facet.FacetingParameters
-
This indicates that the model will be
created with the parametric information
for each vertex.
- specifyParameters - Variable in class nxopen.uf.UFFacet.Parameters
-
- SpecifyPlane - Interface in nxopen.blockstyler
-
Represents a Specify Plane block .
- specifyPlane() - Method in interface nxopen.die.DiePlaneBuilder
-
Returns the specified plane
License requirements: None.
- specifyPlane() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the custom plane definition for the shadow projection
License requirements: None.
- specifyPlane() - Method in interface nxopen.features.WrapBuilder
-
Returns the specified plane that the curves are being wrapped from or unwrapped to.
- specifyPlane(String, int, int, double[], double[]) - Method in interface nxopen.uf.UFUi
-
- SpecifyPlaneData() - Constructor for class nxopen.uf.UFUi.SpecifyPlaneData
-
- specifyPlate() - Method in interface nxopen.routing.PlatformCreatorBuilder
-
The specify plate button callback
License requirements: routing_platform ("Routing Platform")
.
- specifyPoint() - Method in interface nxopen.ame.MountingInterfaceBuilder
-
Returns the specify point
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- specifyPoint() - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilder
-
Returns the specify point
License requirements: None.
- SpecifyPoint - Interface in nxopen.blockstyler
-
Represents a Specify Point block .
- specifyPoint() - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
Returns the specify point
License requirements: None.
- specifypoint - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
-
selected point
- specifypoint - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
-
selected point
- specifyPoint() - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder
-
Returns the point used to determine the boundary of the region.
- specifyPoint() - Method in interface nxopen.FlatteningBuilder
-
- specifyPoint() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the specified points
License requirements: None.
- specifyPoint() - Method in interface nxopen.layout2d.InsertComponentBuilder
-
Returns the point specified to put the 2D Component instance
License requirements: None.
- specifyPointDistance() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to specify the point distance tolerance
License requirements: None.
- specifyPoints() - Method in interface nxopen.features.IFormBuilder
-
Returns the specified points to define iso-parameter curve
License requirements: None.
- specifyPoints() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the specified points to define insertion point locations
License requirements: None.
- specifyPrimaryDirection() - Method in interface nxopen.FlatteningBuilder
-
- SpecifyRuleBuilder - Interface in nxopen.drafting
-
This class is used to specify knowledge fusion rule for a note object in a drawing template.
- SpecifySectionLineBuilder - Interface in nxopen.drawings
-
Select a section line .
- specifySurfaceTolerance - Variable in class nxopen.facet.FacetingParameters
-
If this value is true, then
values must be specified for
surfaceDistanceTolerance
and surfaceAngularTolerance.
- specifySurfaceTolerance - Variable in class nxopen.uf.UFFacet.Parameters
-
- specifyToolPath(String) - Method in interface nxopen.cam.DmTpBuilder
-
Specifies the tool path name.
- SpecifyVector - Interface in nxopen.blockstyler
-
Represents Specify Vector block .
- specifyVector() - Method in interface nxopen.drawings.HingeLineBuilder
-
Returns the direction for the hinge line
License requirements: None.
- specifyVector(String, int, int) - Method in interface nxopen.uf.UFUi
-
- SpecifyVectorData() - Constructor for class nxopen.uf.UFUi.SpecifyVectorData
-
- specifyViewDirection - Variable in class nxopen.facet.FacetingParameters
-
Should we use a viewing direction
for denser faceting around
silhouettes.
- specifyViewDirection - Variable in class nxopen.uf.UFFacet.Parameters
-
- specifyXPlane() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the plane specifying the X direction for the coordinate system.
- specifyYPlane() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the plane specifying the Y direction for the coordinate system.
- spectralLine() - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
Returns the additional spectral lines.
- spectralLines() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the spectral lines setting.
- spectrum() - Method in interface nxopen.cae.LaminateFiberOrientationOptionsBuilder
-
Returns the spectrum
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- spectrum - Variable in class nxopen.cae.Post.Colorbar
-
- SPECTRUM - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Spectrum
- SPECTRUM - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Spectrum
- SPECTRUM - Static variable in class nxopen.cae.XyFunctionLoadType
-
Function is Spectrum
- SPECTRUM - Static variable in class nxopen.cae.XyFunctionResponseType
-
Function is Spectrum
- SPECTRUM - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDomColorEnum
-
- spectrumLevels() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the spectrum levels
License requirements: None.
- spectrumScaling() - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes
-
Returns the spectrum scaling in which the data is encoded.
- spectrumScaling() - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes
-
Returns the default spectrum scaling of the functions in the file
License requirements: None.
- specularFactor - Variable in class nxopen.DisplayManager.J3dMaterial
-
specular reflection coeficient
- speed() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the default animation speed setting
License requirements: None.
- speed() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
Returns the speed
License requirements: None.
- speed() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the speed.
- speed() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the speed.
- speed() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
Returns the speed
License requirements: None.
- speed - Variable in class nxopen.uf.UFPath.SpindleOn
-
- SPEED_SWEEP - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- SpeedControl - Interface in nxopen.mechatronics
-
Represents the Speed Control.
- SpeedControlBuilder - Interface in nxopen.mechatronics
-
- SpeedControlBuilder.AxisJointType - Class in nxopen.mechatronics
-
the Axis Joint types.
- SpeedControlCollection - Interface in nxopen.mechatronics
-
Represents a collection of Speed Constraint.
- speedControls() - Method in interface nxopen.mechatronics.PhysicsManager
-
- speedFlag - Variable in class nxopen.uf.UFPath.SpindleOn
-
- speedGraph - Variable in class nxopen.tooling.SIZERExportBuilder.MechanicalData
-
Speed graph in solution
- speedOption() - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters
-
Returns the speed size of increment
License requirements: None.
- SpeedPositionControlDirectiontype - Class in nxopen.mechatronics
-
the control direction types
- SPFORCE - Static variable in class nxopen.cae.Result.Quantity
-
- SPFTOLERANCE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
SPF Tolerance alignment type
- SPHERE - Static variable in class nxopen.cae.PrimitiveRecipeMeshBuilder.Type
-
Sphere Primitive
- SPHERE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Sphere
- SPHERE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Sphere Feature
- SPHERE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Sphere
- SPHERE - Static variable in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes
-
Sphere tip
- SPHERE - Static variable in class nxopen.cam.InspectionProbeTrackingBuilder.TipTypes
-
Sphere
- SPHERE - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipTypes
-
Sphere
- SPHERE - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
clearance sphere
- SPHERE - Static variable in class nxopen.cam.ProbeCalibrateSphereMoveBuilder.Geometry
-
Sphere
- sphere() - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
Returns the sphere to probe
License requirements: None.
- Sphere - Interface in nxopen.features
-
Represents a sphere feature
To create or edit an instance of this class, use
SphereBuilder
Created in NX6.0.0
- SPHERE - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder.Types
-
Deprecated.
- SPHERE - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx.Types
-
- SPHERE - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Sphere
- SPHERE - Static variable in class nxopen.mechatronics.CollisionSensorBuilder.CollisionShapeTypes
-
Sphere
- SPHERE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Sphere
- SPHERE - Static variable in class nxopen.weld.DatumCommonBuilder.SolidTypes
-
Datum solid will be a sphere
- SPHERE3D - Static variable in class nxopen.preferences.SessionModeling.PoleEditStyleType
-
- SPHERE_FACE_BLEND - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Create spherical blend surface.
- SPHERE_FACE_BLEND - Static variable in class nxopen.die.AddSurfBuilder.Methods
-
Spherical type face blend.
- SPHERE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- SPHERE_ORIGIN_AND_DIAMETER - Static variable in class nxopen.cae.CaeBoundingVolumePrimitiveType
-
- SPHERE_TO_CADCONTACT - Static variable in class nxopen.motion.BodyContactBuilder.ContactTypeOption
-
- SPHERE_TO_EXTRUSION - Static variable in class nxopen.motion.AnalyticalContactBuilder.ContactTypeOption
-
- SPHERE_TO_GROUND_CONTACT - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- SPHERE_TO_RAIL - Static variable in class nxopen.motion.AnalyticalContactBuilder.ContactTypeOption
-
- SPHERE_TO_REVOLUTION - Static variable in class nxopen.motion.AnalyticalContactBuilder.ContactTypeOption
-
- SPHERE_TO_SPHERE - Static variable in class nxopen.motion.AnalyticalContactBuilder.ContactTypeOption
-
- sphereAxisMethod() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the method for determining the axis for a sphere
License requirements: None.
- sphereAxisVector() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the sphere axis vector
License requirements: None.
- SphereBoundingVolume - Interface in nxopen.cae
-
Represents Sphere Bounding Volume for Selection Recipe
This is a sub object
.
- SphereBoundingVolume.CenterDiameterData - Class in nxopen.cae
-
- SphereBuilder - Interface in nxopen.features
-
- SphereBuilder.Types - Class in nxopen.features
-
Represents the sphere types.
- sphereCenter() - Method in interface nxopen.motion.BodyContactBuilder
-
Returns the selection of sphere center for Sphere To CAD
License requirements: mechanisms ("MECHANISMS")
.
- spheredirection - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
Sphere direction definition method
- spheredirectionpoint1 - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
For the sphere 3 points normal method: 1st point
- spheredirectionpoint2 - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
For the sphere 3 points normal method: 2nd point
- spheredirectionpoint3 - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
For the sphere 3 points normal method: 3rd point
- spheredirectionvector - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
For the sphere vector method: sphere direction vector
- sphereLink() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the sphere link
License requirements: mechanisms ("MECHANISMS")
.
- sphereLink() - Method in interface nxopen.motion.BodyContactBuilder
-
Returns the selection of sphere link for Sphere To CAD
License requirements: mechanisms ("MECHANISMS")
.
- sphereMaxFacetSize() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the sphere max facet size
License requirements: None.
- spherePoint() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the sphere point
License requirements: mechanisms ("MECHANISMS")
.
- sphereRadius() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the sphere radius
License requirements: mechanisms ("MECHANISMS")
.
- sphereRadius() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the sphere radius
License requirements: None.
- SPHERES - Static variable in class nxopen.cae.Post.Style
-
- SPHERES - Static variable in class nxopen.cam.InspectionPatternFeatureBuilder.FeatureFilterTypes
-
Only sphere inspection features will be listed
- sphereSubdivisionLevelOption() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the subdivision level.
- sphereToCadParameters() - Method in interface nxopen.motion.BodyContactBuilder
-
Returns the 3D BodyContact's subobject (the sphere to cad parameters)
License requirements: None.
- SPHERIC - Static variable in class nxopen.cae.connections.DofCombination
-
DOF1 fixed, DOF2 fixed, DOF3 fixed, DOF4 free, DOF5 free, DOF6 free
- SPHERICAL - Static variable in class nxopen.annotations.DatumTargetBuilder.Types
-
spherical
- SPHERICAL - Static variable in class nxopen.annotations.DiameterSymbol
-
Specifies spherical symbol
- SPHERICAL - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType
-
Spherical
- SPHERICAL - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
spherical type
- SPHERICAL - Static variable in class nxopen.annotations.ToleranceZoneShape
-
Specifies spherical zone shape
- SPHERICAL - Static variable in class nxopen.cae.AssignNodalCSBuilder.CSType
-
spherical
- SPHERICAL - Static variable in class nxopen.cae.BushingEADBuilder.CoordinateSystemDataType
-
use spherical coordinate system data to orient the element
- SPHERICAL - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsCsysDataType
-
Use spherical coordinate system data to orient the material.
- SPHERICAL - Static variable in class nxopen.cae.connections.ConnectionDBItemStiffnessType
-
Spherical
- SPHERICAL - Static variable in class nxopen.cae.NodalForceReportBuilder.CSType
-
- SPHERICAL - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CsysType
-
- SPHERICAL - Static variable in class nxopen.cae.ShellEADBuilder.CoordinateSystemDataType
-
use spherical coordinate system data to orient the material
- SPHERICAL - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
-
Spherical
- SPHERICAL - Static variable in class nxopen.die.DrawBeadTaperBuilder.TaperTypes
-
Create a spherical end based on a radius.
- SPHERICAL - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
-
Deprecated.
for spherical geometry
- SPHERICAL - Static variable in class nxopen.display.IrayPlusSimpleMaterialEditorBuilder.TextureSpace
-
- SPHERICAL - Static variable in class nxopen.Face.FaceType
-
Spherical face
- SPHERICAL - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType
-
Spherical face
- SPHERICAL - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.MirrorSurfaceType
-
Represents the spherical mirror surface
- SPHERICAL - Static variable in class nxopen.fields.SpatialMap.TypeEnum
-
Map to spherical csys
- SPHERICAL - Static variable in class nxopen.motion.BushingBuilder.BushingTypes
-
Spherical type bushing
- SPHERICAL - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type allows three rotations.
- SPHERICAL - Static variable in class nxopen.tooling.UndersizeBuilder.Orbit
-
spherical
- SPHERICAL_DIAMETER - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape
-
spherical diameter
- SPHERICAL_DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DiameterSymbolOptions
-
- SPHERICAL_DIAMETER - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions
-
spherical diameter
- SPHERICAL_DIAMETER_SYMBOL - Static variable in class nxopen.uf.UFDrf.DiameterSymbol
-
- SPHERICAL_HORIZON - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Spherical horizon.
- SPHERICAL_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
-
- SPHERICAL_LIGHT_TUBES_ROOM - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Spherical light tubes room.
- SPHERICAL_MILL - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
-
Spherical MillTool
- SPHERICAL_MILL - Static variable in class nxopen.features.AnalyzePocketBuilder.ToolTypes
-
Spherical Mill.
- SPHERICAL_MILL - Static variable in class nxopen.features.BlendPocketBuilder.ToolTypes
-
Spherical Mill.
- SPHERICAL_ROOM - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Spherical room.
- SPHERICAL_TEXTURE_SPACE - Static variable in class nxopen.uf.UFDisp.TextureSpaceType
-
- SPHERICAL_TUBES - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Spherical tubes.
- sphericalActuatorCoefficients() - Method in interface nxopen.motion.BushingActuatorCoefficients
-
Returns the spherical actuator coefficients.
- sphericalCoefficients() - Method in interface nxopen.motion.BushingCoefficients
-
- SphericalCoordinateSystem - Interface in nxopen
-
- SphericalCorner - Interface in nxopen.features
-
Represents a spherical corner feature
To create or edit an instance of this class, use
SphericalCornerBuilder
Created in NX8.5.0
- SphericalCornerBuilder - Interface in nxopen.features
-
- sphericalDampingCoefficients() - Method in interface nxopen.motion.BushingDampingCoefficients
-
Returns the spherical damping coefficients.
- sphericalStiffnessCoefficients() - Method in interface nxopen.motion.BushingStiffnessCoefficients
-
Returns the spherical coefficients.
- SPIDER - Static variable in class nxopen.cae.connections.NodalTargetType
-
Spider
- SPIDER - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Spider Connection
- SPIDER - Static variable in class nxopen.cae.ElementTypes.Shape
-
Spider
- SPIDER_JUNCTION - Static variable in class nxopen.cae.BoltBuilder.BoltOperation
-
Creates a spider connection at junctions
- SpiderElementBuilder - Interface in nxopen.cae
-
- SpiderElementBuilder.NewMeshType - Class in nxopen.cae
-
Option to create new mesh or add to existing mesh
- spiderElementType() - Method in interface nxopen.cae.BoltBuilder
-
Returns the element type to be created for the spider
License requirements: None.
- spiderLegNodes() - Method in interface nxopen.cae.ElementConnectivityBuilder
-
Returns the spider element leg nodes.
- spiderMesh() - Method in interface nxopen.cae.CAEConnection
-
Returns the spider mesh associated to this recipe which can be NULL
License requirements: nx_masterfem ("Finite Element Modeling")
.
- spikeLength() - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
Returns the spike length.
- spikeLength() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
Returns the spike length.
- spikeLength() - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
Returns the spike length.
- spikeLength - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- spill() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the spill
License requirements: None.
- spin() - Method in interface nxopen.blockstyler.DoubleTable
-
Returns the Spin
License requirements: None.
- spin() - Method in interface nxopen.blockstyler.IntegerTable
-
Returns the Spin
License requirements: None.
- SPINDLE - Static variable in class nxopen.cam.ConvertFromMCDBuilder.PocketLocationTypes
-
- SPINDLE - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisMotionType
-
spindle
- SPINDLE_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.XcMappingTypes
-
Map XC to ZM or XM of the MCS
- SPINDLE_AXIS - Static variable in class nxopen.cam.TurnOrientWcs.YcMappingTypes
-
Map YC to ZM or XM of the MCS
- SPINDLE_MARKER - Static variable in class nxopen.cam.ToolpathEventType
-
- SPINDLE_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.SpindleMode
-
- SPINDLE_MODE_RPM - Static variable in class nxopen.uf.UFPath.SpindleMode
-
- SPINDLE_MODE_SFM - Static variable in class nxopen.uf.UFPath.SpindleMode
-
- SPINDLE_MODE_SMM - Static variable in class nxopen.uf.UFPath.SpindleMode
-
- SPINDLE_NC_AXIS - Static variable in class nxopen.sim.KinematicAxisBuilder.AxisMotionType
-
spindle NC-axis
- SPINDLE_SPEED - Static variable in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn
-
spindle speed
- spindleBeforeEngage() - Method in interface nxopen.cam.Cycle
-
Returns the spindle before engage
License requirements: None.
- spindleBeforeRetract() - Method in interface nxopen.cam.Cycle
-
Returns the spindle before retract
License requirements: None.
- spindleDirectionAutomaticBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle_direction_automatic builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- spindleDirectionBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle direction builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- spindleEndPoint() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the end point of the spindle line, the other end point is the wheel point.
- spindleFace() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the spindle face
License requirements: None.
- spindleFileLocation() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify the location of the spindle file.
- spindleFileName() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the name of the file containing the spindle definition.
- spindleLines() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the selection list containing the spindle lines in all positions.
- spindleLinesLayer() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the layer of the spindle lines.
- spindleMaximumRpmBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle_maximum_rpm builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- spindleMode() - Method in interface nxopen.cam.CycleSpindle
-
Returns the spindle type
License requirements: cam_base ("CAM BASE")
.
- spindleModeBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the spindle_mode builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- spindleModeBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle_mode builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- SpindleOn() - Constructor for class nxopen.uf.UFPath.SpindleOn
-
- SpindleOn(double, double, String, UFPath.SpindleMode, UFPath.Direction, boolean, boolean, boolean) - Constructor for class nxopen.uf.UFPath.SpindleOn
-
- spindlePresetRpmBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle_preset_rpm builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- spindlePresetRpmToggleBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle_preset_rpm_toggle builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- spindleRangeBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the spindle_range builder (inheritable Text)
License requirements: cam_base ("CAM BASE")
.
- spindleRangeBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle_range builder (inheritable Text)
License requirements: cam_base ("CAM BASE")
.
- spindleRpmBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the spindle_rpm builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- spindleRpmBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle_rpm builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- spindleRpmToggle() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the spindle_rpm_toggle
License requirements: None.
- spindleRpmToggleBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle_rpm_toggle builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- spindleSliderBody() - Method in interface nxopen.tooling.SpindleSliderBuilder
-
Returns the spindle slider body
License requirements: None.
- SpindleSliderBuilder - Interface in nxopen.tooling
-
- spindleSliderName() - Method in interface nxopen.tooling.SpindleSliderBuilder
-
Returns the spindle slider name
License requirements: None.
- spindleSliderVector() - Method in interface nxopen.tooling.SpindleSliderBuilder
-
Returns the direction spindle slider move along
License requirements: None.
- spindleSpeed() - Method in interface nxopen.cam.CycleSpindle
-
Returns the spindle value
License requirements: cam_base ("CAM BASE")
.
- spindleStop() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the spindle stop
License requirements: None.
- spindleTextBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the spindle_text builder (inheritable Text)
License requirements: cam_base ("CAM BASE")
.
- spindleTextBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the spindle_text builder (inheritable Text)
License requirements: cam_base ("CAM BASE")
.
- spine() - Method in interface nxopen.die.AddSurfBuilder
-
Returns the spine string, which determines the orientation of the sample planes
License requirements: None.
- spine() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the spine string, which determines the orientation of the sample planes
License requirements: None.
- spine() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the spine for face blend
License requirements: None.
- spine() - Method in interface nxopen.features.HelixBuilder
-
Returns the length spine
License requirements: None.
- spine() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the spine.
- SPINE - Static variable in class nxopen.features.NSidedSurfaceBuilder.UVOrientationType
-
spine orientation
- spine() - Method in interface nxopen.features.SweptBuilder
-
Returns the spine (optional).
- spine() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the spine.
- spine() - Method in interface nxopen.geometricutilities.AlongSpineBuilder
-
Returns the Spine
License requirements: None.
- spine() - Method in interface nxopen.geometricutilities.MultiTransitionLawBuilder
-
Returns the spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- spine() - Method in interface nxopen.geometricutilities.NonInflectingLawBuilder
-
Returns the Spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- spine() - Method in interface nxopen.geometricutilities.SShapedLawBuilder
-
Returns the Spine
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- SPINE - Static variable in class nxopen.MeshProfileString.Type
-
- spine() - Method in interface nxopen.routing.RouteSweptTwistBuilder
-
Returns the spine
License requirements: routing_harness ("Routing Harness")
.
- SPINE_CURVE - Static variable in class nxopen.features.AestheticFaceBlendBuilder.AlignmentType
-
Spine Curve option will align the sections based on a string of curves.
- SPINE_CURVE - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
- spineCurve() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the spine curve.
- spineCurve() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- SpineCurve - Interface in nxopen.features
-
Represents a spine curve feature
To create or edit an instance of this class, use
SpineCurveBuilder
Created in NX11.0.0
- spineCurve() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the spine curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- SpineCurveBuilder - Interface in nxopen.features
-
- SpineCurveBuilder.ArcSegmentsTypes - Class in nxopen.features
-
This enum represents the arc segments types
- spineDefinition() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the spine definition
License requirements: None.
- SpineDefinitionBuilder - Interface in nxopen.geometricutilities
-
Provides a spine definition for modeling operations .
- SpineDefinitionBuilder.MethodOptions - Class in nxopen.geometricutilities
-
Options to define a spine
- spineEndFlowDirection() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the spine end flow direction.
- spineOption() - Method in interface nxopen.geometricutilities.AlongSpineBuilder
-
Returns the alongSpineOption.
- SpinePlaneBuilder - Interface in nxopen.geometricutilities
-
- SpinePlaneBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- SpinePointData - Interface in nxopen.geometricutilities
-
Represents a spine point def object
To create an instance of this class, see
SpinePointDataCollection
Created in NX5.0.0
- spinePointData() - Method in interface nxopen.Part
-
Returns the SpinePointDataCollection instance belonging to this part .
- SpinePointData.ParameterType - Class in nxopen.geometricutilities
-
Parameter type
- SpinePointDataCollection - Interface in nxopen.geometricutilities
-
This class contains the factory methods for creating a SpinePointData object.
- spinePointList() - Method in interface nxopen.geometricutilities.AlongSpineBuilder
-
Returns the list of spine points.
- spineRadius() - Method in interface nxopen.die.AddSurfBuilder
-
- spineRadius() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
- spineSection() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the spine section.
- spineStartFlowDirection() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the spine start flow direction.
- spineType() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the spine.
- spineVector() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the spine vector.
- SPINNING - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Spinning classification
- SPINNING_NON_SPINNING - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Spinning Nonspinning
- SPIRAL - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Spiral
- SPIRAL - Static variable in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes
-
Spiral
- SPIRAL - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Spiral
- SPIRAL - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
spiral pattern.
- SPIRAL_HELIX - Static variable in class nxopen.cam.DPMItpBuilder.CutTypeOption
-
Spiral/helix cut type
- SPIRAL_THICKNESS - Static variable in class nxopen.cam.CylinderMillingBuilder.DiameterForHelixTypes
-
Spiral Thickness
- spiralDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the spiral definition.
- spiralNormal() - Method in interface nxopen.geometricutilities.SpiralPattern
-
Returns the spiral normal vector
License requirements: None.
- spiralOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the orientationOption for Spiral pattern type
License requirements: None.
- SpiralPattern - Interface in nxopen.geometricutilities
-
the Spiral pattern definition.
- SpiralPattern.OrientType - Class in nxopen.geometricutilities
-
This defines spiral direction method
- SpiralPattern.SpiralDefineSize - Class in nxopen.geometricutilities
-
This defines size spiral type
- spiralRadiusBuilder() - Method in interface nxopen.cam.DmSpiralBuilder
-
Returns the Spiral Radius
License requirements: None.
- spiralStepoverBuilder() - Method in interface nxopen.cam.DmSpiralBuilder
-
Returns the Spiral Stepover builder
License requirements: None.
- spiralStepoverDistance() - Method in interface nxopen.cam.DmSpiralBuilder
-
Returns the Stepover Distance.
- spiralStepoverPercent() - Method in interface nxopen.cam.DmSpiralBuilder
-
Returns the Stepover Percent.
- spiralThickness() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Spiral Thickness
License requirements: None.
- spl - Variable in class nxopen.uf.UFCurve.FixSplineData
-
- SPLICE - Static variable in class nxopen.routing.electrical.ConnectorDevice.ComponentType
-
- SPLICE - Static variable in class nxopen.routing.RouteManager.PartType
-
- SPLINE - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes
-
splines
- SPLINE - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.SplineArcOutputTypes
-
spline
- SPLINE - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.SplineLineOutputTypes
-
spline
- SPLINE - Static variable in class nxopen.DxfdwgCreator.ExportSplinesAsOptions
-
- SPLINE - Static variable in class nxopen.Edge.EdgeType
-
Spline edge
- SPLINE - Static variable in class nxopen.facet.FacetedEdge.FacetededgeType
-
Spline edge
- SPLINE - Static variable in class nxopen.markup.Polyline.LineOption
-
Spline type
- SPLINE - Static variable in class nxopen.mechatronics.PathConstraintFrameBuilder.CurveTypes
-
spline
- SPLINE - Static variable in class nxopen.motion.ConnectorCoefficientTypes
-
spline type
- SPLINE - Static variable in class nxopen.motion.JointDefine.ScrewJointDisplCurveType
-
Spline type
- SPLINE - Static variable in class nxopen.motion.JointDefine.ScrewJointRatioType
-
Spline type
- SPLINE - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Spline
- SPLINE - Static variable in class nxopen.preferences.RoutingPath.CurveType
-
UF_ROUTE_AV_CURVES_SPLINES
- spline() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the spline stored in the builder.
- spline() - Method in interface nxopen.SketchG1Constraint
-
Returns the spline on which the G1 constraint is applied.
- spline() - Method in interface nxopen.SketchG2Constraint
-
Returns the spline on which the G2 constraint is applied.
- Spline - Interface in nxopen
-
Represents a spline curve.
- Spline() - Constructor for class nxopen.uf.UFCurve.Spline
-
- Spline(int, int, int, double[], double[][], double, double) - Constructor for class nxopen.uf.UFCurve.Spline
-
- Spline() - Constructor for class nxopen.uf.UFEval.Spline
-
- Spline(boolean, boolean, int, int, int) - Constructor for class nxopen.uf.UFEval.Spline
-
- SPLINE_CRVATR_HAS_NO_SLOPE - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_CURVE - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices
-
Function
- SPLINE_CURVE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Spline curve
- SPLINE_CURVES - Static variable in class nxopen.motion.RoadBuilder.PathDatatypeChoices
-
Spline Curves
- SPLINE_DATA - Static variable in class nxopen.positioning.Constraint.Type
-
A spline and its defining points
- SPLINE_DEF_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- SPLINE_DEFINING_POINT - Static variable in class nxopen.Sketch.ConstraintPointType
-
A defining point of a spline.
- SPLINE_DEFINING_POINT - Static variable in class nxopen.uf.UFSket.GeomVertex
-
- SPLINE_EXCEED_MAX_CONSTRAINTS - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_EXCEEDS_MAX_ORDER - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- SPLINE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- SPLINE_HASNO_DEFINEDATA - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_HASNO_INPUTDATA - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_INSUFF_DEG_FOR_CNSTRNS - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_INSUFF_POINTS - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_INVALID_POSITION - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_LENGTH - Static variable in class nxopen.positioning.Constraint.Type
-
Constrains the curve length of a spline
- SPLINE_NON_ORTHO_SLP_CRVATR - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_NONINCREASING_PARAMS - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_NOT_CREATED - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_NOT_ENOUGH_CONSTRAINTS - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_POINTS - Static variable in class nxopen.features.PointSetBuilder.Types
-
Create points along spline.
- SPLINE_POINTS - Static variable in class nxopen.features.ThroughCurveMeshBuilder.ConstructionMethod
-
Use the points and tangent values at the points for reparameterizing curves.
- SPLINE_POINTS - Static variable in class nxopen.features.ThroughCurvesBuilder.ConstructionMethod
-
Use the points and tangent values at the points for reparameterizing curves.
- SPLINE_POINTS - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.Type
-
- SPLINE_POLE - Static variable in class nxopen.Sketch.ConstraintPointType
-
The control pole of a spline
- SPLINE_POLE - Static variable in class nxopen.uf.UFSket.GeomVertex
-
- SPLINE_POLE_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- SPLINE_RECEDES_MIN_ORDER - Static variable in class nxopen.uf.UFConstants
-
- SPLINE_SEGMENT - Static variable in class nxopen.SketchProjectBuilder.OutputCurve
-
spline segment output
- SPLINE_SURFACE - Static variable in class nxopen.motion.RoadBuilder.SurfaceDatatypeChoices
-
Spline Surface defined by 3D Profile
- SPLINE_SURFACE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Spline surface
- splineArcOutputType() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
Returns the spline arc output type
License requirements: None.
- SplineBeam - Interface in nxopen.motion
-
Represents a SplineBeam
To create or edit an instance of this class, use
SplineBeamBuilder
Created in NX12.0.0
- SplineBeamBuilder - Interface in nxopen.motion
-
- SplineBeamBuilder.DefinitionMethodType - Class in nxopen.motion
-
the definition method type
- SplineBeamBuilder.SectionAxisType - Class in nxopen.motion
-
the definition of the section axis type
- SplineBeamCollection - Interface in nxopen.motion
-
Represents a collection of SplineBeams
To obtain an instance of this class, refer to
MotionManager
Created in NX12.0.0
- splineBeamProperties() - Method in interface nxopen.motion.MotionManager
-
- SplineBeamProperty - Interface in nxopen.motion
-
Represents a SplineBeam Property
To create or edit an instance of this class, use
SplineBeamPropertyBuilder
Created in NX12.0.0
- SplineBeamPropertyBuilder - Interface in nxopen.motion
-
- SplineBeamPropertyBuilder.DampingTypes - Class in nxopen.motion
-
the damping type
- SplineBeamPropertyCollection - Interface in nxopen.motion
-
Represents a collection of SplineBeamProperty
To obtain an instance of this class, refer to
MotionManager
Created in NX12.0.0
- splineBeams() - Method in interface nxopen.motion.MotionManager
-
- SplineCollection - Interface in nxopen
-
Represents a collection of splines.
- splineCollector() - Method in interface nxopen.features.PointSetBuilder
-
Returns the collector that is used to hold a spline.
- splineCurve() - Method in interface nxopen.motion.RoadBuilder
-
Returns the spline curve of the road object of surface type
License requirements: mechanisms ("MECHANISMS")
.
- splineCurveProfile() - Method in interface nxopen.motion.RoadBuilder
-
Returns the spline profile of the road object of surface type
License requirements: mechanisms ("MECHANISMS")
.
- splineData - Variable in class nxopen.uf.UFCurve.SmoothSplineData
-
- splineData - Variable in class nxopen.uf.UFCurve.SmoothSplineDataStData
-
- SplineData() - Constructor for class nxopen.uf.UFSo.SplineData
-
- SplineData(int, int, int, int, int[], Tag[], double[], Tag[], Tag[], Tag[], int[]) - Constructor for class nxopen.uf.UFSo.SplineData
-
- splineDefaultActionType() - Method in interface nxopen.preferences.SessionModeling
-
Returns the value indicating the default action for a spline.
- splineDefiningPointIndex - Variable in class nxopen.Sketch.ConstraintGeometry
-
Ignored unless PointType is SplineDefiningPoint.
- SplineExtensionBuilder - Interface in nxopen.geometricutilities
-
Spline extension builder class.
- SplineExtensionBuilder.ExtensionOption - Class in nxopen.geometricutilities
-
Spline extension options
- splineFitTolerance() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
Returns the spline fit tolerance
License requirements: None.
- splineFitToleranceType() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
Returns the spline fit tolerance type
License requirements: None.
- splineId - Variable in class nxopen.uf.UFModlGeneral.CreateSplineData
-
- splineLineOutputType() - Method in interface nxopen.cam.ArcOutputTypeCiBuilder
-
Returns the spline line output type
License requirements: None.
- splineMethod() - Method in interface nxopen.features.StudioSplineBuilder
-
- splineOptions - Variable in class nxopen.routing.HealPath.AllData
-
- SplineOptions - Class in nxopen.routing
-
Different spline creation options.
- SplinePathBuilder - Interface in nxopen.routing
-
- SplinePathBuilder.AssignTangentExtensionForPointAtIndexData - Class in nxopen.routing
-
- SplinePathBuilder.DefiningPointMethod - Class in nxopen.routing
-
Specifies if a new point should be created when adding a point to the spline.
- SplinePathBuilder.DefiningTypes - Class in nxopen.routing
-
Specifies how the spline points define the shape of the spline.
- SplinePathBuilder.DragMode - Class in nxopen.routing
-
Specifies if drag network is active when updating the position of a defining point.
- SplinePathBuilder.ExtensionDataForPointAtIndexData - Class in nxopen.routing
-
- SplinePathBuilder.IsLengthLockedData - Class in nxopen.routing
-
- SplinePathBuilder.IsSplineSlackedData - Class in nxopen.routing
-
- SplinePathBuilder.OffsetData - Class in nxopen.routing
-
- SplinePathBuilder.SplinePathAttributeOptions - Class in nxopen.routing
-
Describes user attribute methods options.
- SplinePathBuilder.SplinePathRadiusSource - Class in nxopen.routing
-
Describes the method for the constrained curvature spline to be defined as.
- SplinePathBuilder.SplinePathSlackType - Class in nxopen.routing
-
Describes the type of slack to be applied to the spline.
- SplinePathBuilder.StartAndEndRcpData - Class in nxopen.routing
-
- splinePointsBy() - Method in interface nxopen.features.PointSetBuilder
-
Returns the spline points definition setting.
- splinePointsType() - Method in interface nxopen.positioning.Constraint
-
Returns the type of the spline.
- splinePrefix - Variable in class nxopen.uf.UFSket.AskPreferencesData
-
- splinePts - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
-
- splinePts - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
-
- splines() - Method in interface nxopen.BasePart
-
Returns the SplineCollection instance belonging to this part .
- SPLINES - Static variable in class nxopen.DxfdwgImporter.ImportPolylinesAs
-
import polylines as splines
- SplineSegment - Interface in nxopen.routing
-
Represents a spline segment.
- SplineSegmentCollection - Interface in nxopen.routing
-
- splinesegments - Variable in class nxopen.routing.RouteManager.ConvertSplineSegmentsData
-
The converted spline segments.
- splineSegments() - Method in interface nxopen.routing.SegmentManager
-
Spline Segment collection .
- SplineSettingsData() - Constructor for class nxopen.routing.SubdivideSegmentBuilder.SplineSettingsData
-
- SplineSettingValuesData() - Constructor for class nxopen.routing.SubdivideSegmentBuilder.SplineSettingValuesData
-
- splineTag - Variable in class nxopen.uf.UFCurve.CreateSplineData
-
- splineType() - Method in interface nxopen.motion.RoadBuilder
-
Returns the spline type
License requirements: mechanisms ("MECHANISMS")
.
- splineType() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the spline type
License requirements: mechanisms ("MECHANISMS")
.
- SPLIT - Static variable in class nxopen.cam.CutParametersFilletsTypes
-
Fillets mode: Split
- SPLIT - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.KnuckleOptions
-
Split the stiffener at knuckle points
- SPLIT - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption
-
split sub die base
- SPLIT - Static variable in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
-
Splits a scrap by selected curves
- SPLIT - Static variable in class nxopen.tooling.SplitSolidBuilder.OperationType
-
split option
- split() - Method in interface nxopen.weld.WeldFillStripBuilder
-
Splits the fill strip at the center and creates a new strip.
- split() - Method in interface nxopen.weld.WeldJointBuilder
-
- SPLIT_AND_ATTACH - Static variable in class nxopen.cae.AttachElementsBuilder.AttachOption
-
split and attach
- SPLIT_BODY - Static variable in class nxopen.tooling.MWDefineSheetsBuilder.Types
-
- SPLIT_BY_DIMENSION_LINE - Static variable in class nxopen.annotations.TextOrientation
-
Specifies dimenson text split by the dimension line
- SPLIT_BY_LINE - Static variable in class nxopen.cae.ElementSplitBuilder.Types
-
Split by line
- SPLIT_HORIZONTALLY - Static variable in class nxopen.routing.Division.SplitDirectionType
-
Creates a horizontal split
- SPLIT_HORIZONTALLY - Static variable in class nxopen.routing.DivisionsBuilder.SplitDirectionType
-
Creates a horizontal split
- SPLIT_ONLY - Static variable in class nxopen.cae.AttachElementsBuilder.AttachOption
-
split only
- SPLIT_VERTICALLY - Static variable in class nxopen.routing.Division.SplitDirectionType
-
Creates a vertical split
- SPLIT_VERTICALLY - Static variable in class nxopen.routing.DivisionsBuilder.SplitDirectionType
-
Creates a vertical split
- splitAlongGuide() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns whether the section surface should be segmented based on the input strings and
constraint faces to create a multi-segment surface output.
- splitAngle() - Method in interface nxopen.weld.WeldJointBuilder
-
- splitBodies - Variable in class nxopen.uf.UFModeling.SplitBodyData
-
- splitBodies - Variable in class nxopen.uf.UFModeling.SplitBodyRetainToolData
-
- SplitBody - Interface in nxopen.features
-
Represents a split body feature.
- splitBody(int, Tag[], Tag) - Method in interface nxopen.uf.UFModeling
-
- SplitBodyBuilder - Interface in nxopen.features
-
- SplitBodyData() - Constructor for class nxopen.uf.UFModeling.SplitBodyData
-
- splitBodyRetainTool(int, Tag[], Tag) - Method in interface nxopen.uf.UFModeling
-
- SplitBodyRetainToolData() - Constructor for class nxopen.uf.UFModeling.SplitBodyRetainToolData
-
- SplitBuilder - Interface in nxopen.mechanicalrouting
-
- splitCurve() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the splitting curve
License requirements: None.
- splitCurveOption() - Method in interface nxopen.features.AOCSBuilder
-
Returns the split curve at face boundary option .
- splitCurveParams - Variable in class nxopen.uf.UFModl.StycornerData
-
- splitDirection() - Method in interface nxopen.routing.Division
-
Returns the direction of split, either vertical or horizontal
License requirements: routing_hvac ("Routing HVAC")
.
- splitDirection() - Method in interface nxopen.routing.DivisionsBuilder
-
Returns the direction of split, either vertical or horizontal
License requirements: routing_hvac ("Routing HVAC")
.
- splitDirectionOption() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
Returns the split direction method being used to construct the splitting sheet body.
- splitDirectionOption() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the option to split profile/plate along tool face or perpendicular to profile/plate molding face.
- SplitDuctBuilder - Interface in nxopen.routing
-
Represents a
SplitDuctBuilder
Builder for creating/editing splits at an end of a duct.
- SplitDuctBuilder.FlowTypes - Class in nxopen.routing
-
The type of flow, whether Absolute or Relative, to be displayed in the %Flow
column in the list.
- splitFeatureGroup() - Method in interface nxopen.features.shipdesign.RemoveSplitBuilder
-
Returns the split feature group.
- splitGap() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the split gap value.
- SplitInsertBuilder - Interface in nxopen.tooling
-
Creates split insert builder for progressive die.
- splitKnuckleEdges() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the split knuckle edges, which are used to split a plate into separate knuckle parts.
- splitKnuckleEdges() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the split knuckle edges, which are used to create seam feature to split a plate system into plate subsystem.
- splitKnuckleLocations() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Returns the collector containing the knuckle points that are to be used to create seams.
- splitLength() - Method in interface nxopen.weld.WeldJointBuilder
-
- splitLineType() - Method in interface nxopen.cae.AttachElementsBuilder
-
Returns a split line option
License requirements: None.
- splitMass() - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
Returns the output mass split option option
License requirements: None.
- splitMethod() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns the use existing connectivity option
License requirements: nx_masterfem ("Finite Element Modeling")
.
- splitMethod() - Method in interface nxopen.cae.OneDimensionalElementSplitBuilder
-
Returns the split method type
License requirements: None.
- splitObject() - Method in interface nxopen.routing.SplitRunBuilder
-
Returns the user selected split object
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- splitObject() - Method in interface nxopen.tooling.SplitSolidBuilder
-
Returns the tool object to split the target body.
- splitOffset() - Method in interface nxopen.features.WrapGeometryBuilder
-
Returns the Offset applied to both sides of the splitting planes.
- splitOffset() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Returns the Offset applied to both sides of the splitting planes.
- splitOffset - Variable in class nxopen.uf.UFModl.WrapAssem
-
- splitOffset - Variable in class nxopen.uf.UFModl.WrapGeom
-
- splitOption() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the method used to split the joint
License requirements: None.
- splitOutputAlongBoundaryCurves() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the split output along boundary curves option
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- splitPlane() - Method in interface nxopen.tooling.SplitSolidBuilder
-
Returns the plane to be a split tool.
- splitPoorQuads - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- SplitProfilePlateBuilder - Interface in nxopen.features.shipdesign
-
- SplitProfilePlateBuilder.ProfileType - Class in nxopen.features.shipdesign
-
Represents the target body type.
- SplitProfilePlateBuilder.SplitDirectionOptionType - Class in nxopen.features.shipdesign
-
Represents split direction to trim profile or plate solid body .
- SplitProfilePlateBuilder.ToolOptionType - Class in nxopen.features.shipdesign
-
Represents trim tool type to trim profile or plate solid body.
- splitReinforcement() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the flag to indicate whether to split the reinforcement part on the standard part.
- splitRunBuilder(Run) - Method in interface nxopen.routing.RouteManager
-
- SplitRunBuilder - Interface in nxopen.routing
-
- splits - Variable in class nxopen.uf.UFModl.WrapAssem
-
- splits - Variable in class nxopen.uf.UFModl.WrapGeom
-
- splitScrap() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the scrap to be splitted or merged
License requirements: None.
- splitSegment() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Splits the selected segment into multiple segments by placing guide lines at end points of the edges for the selected segment.
- splitSegment() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Splits the selected segment into multiple segments by placing guide lines at end points of the edges for the selected segment.
- splitSize() - Method in interface nxopen.cae.AttachElementsBuilder
-
Returns the split size
License requirements: None.
- SplitSolidBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to split a solid with geometry tools.
- SplitSolidBuilder.OperationType - Class in nxopen.tooling
-
the split operation type: split, trim.
- SplitSolidBuilder.ToolObjectOption - Class in nxopen.tooling
-
the split tool selection type: Existing Object, New Plane.
- SplitSolidCollection - Interface in nxopen.tooling
-
Creates SplitSolid builder collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
- splitSolids() - Method in interface nxopen.tooling.ToolingManager
-
Returns the SplitSolidCollection instance belonging to this part .
- SplitStandardPart - Interface in nxopen.features.shipdesign
-
Represents a split standard part feature.
- SplitStandardPartBuilder - Interface in nxopen.features.shipdesign
-
- SplitStandardPartBuilder.ToolTypes - Class in nxopen.features.shipdesign
-
Represents the split tool types.
- SplitSubdivisionBodyBuilder - Interface in nxopen.features.subdivision
-
- SplitSubdivisionBodyBuilder.InputBodyOptions - Class in nxopen.features.subdivision
-
- SplitSubopCommand - Interface in nxopen.cam
-
Represents an Split Subop Command Builder
This cannot be instantiated
.
- SplitSubopCommand.LinePlaneTypes - Class in nxopen.cam
-
Available line plane types
- SplitSubopCommand.Types - Class in nxopen.cam
-
Available split types
- splitSubSingle() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the split options: whole sub die base or single plate.
- splitSurfaces() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns a value indicating whether to split the surfaces along boundary curves
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- splitTarget() - Method in interface nxopen.tooling.SplitSolidBuilder
-
Returns the target body to be split.
- Splitter - Interface in nxopen.cam
-
- SPLITTER_FIVE - Static variable in class nxopen.cam.BladeFinishGeom.Types
-
Splitter 5
- SPLITTER_FOUR - Static variable in class nxopen.cam.BladeFinishGeom.Types
-
Splitter 4
- SPLITTER_ONE - Static variable in class nxopen.cam.BladeFinishGeom.Types
-
Splitter 1
- SPLITTER_THREE - Static variable in class nxopen.cam.BladeFinishGeom.Types
-
Splitter 3
- SPLITTER_TWO - Static variable in class nxopen.cam.BladeFinishGeom.Types
-
Splitter 2
- splitterAngle() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the splitter angle
License requirements: None.
- splitterColor() - Method in interface nxopen.cam.Preferences
-
Returns the splitter color
License requirements: None.
- splitterList() - Method in interface nxopen.cam.MultiBladeSplittersGeometry
-
Returns the splitter list builder
License requirements: None.
- SplitterList - Interface in nxopen.cam
-
Represents a list of objects.
- splittersGeometry() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the splitters geometry
License requirements: cam_base ("CAM BASE")
.
- splittingCurves() - Method in interface nxopen.tooling.SplitInsertBuilder
-
Returns the splitting curves
License requirements: None.
- splittingDirection() - Method in interface nxopen.tooling.SplitInsertBuilder
-
Returns the splitting direction
License requirements: None.
- splittingSheets() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Returns the sheets for splitting the subtracted workpiece
License requirements: None.
- splitToolPaths(CAMObject[], ToolPathSplitBuilder) - Method in interface nxopen.cam.CAMSetup
-
Tool Path Split by Holder
License requirements: cam_base ("CAM BASE")
.
- splitType() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
Returns the type of split (by tranfer or collision)
License requirements: None.
- splitType() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
Returns the type of split (by tranfer or collision)
License requirements: None.
- splitXforms - Variable in class nxopen.uf.UFModl.WrapAssem
-
- SPOT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- SPOT - Static variable in class nxopen.annotations.Symbol
-
Specifies spot weld symbol
- SPOT - Static variable in class nxopen.LightType
-
A spot light is the same as a point light,
except that it is constrained by a cone shape.
- SPOT - Static variable in class nxopen.routing.OverstockBuilder.WrapType
-
Spot
- SPOT - Static variable in class nxopen.routing.WrapApplicationType
-
Spot wrap application, i.e., 100% overlap
- SPOT2 - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- SPOT2 - Static variable in class nxopen.annotations.Symbol
-
Specifies spot2 weld symbol
- SPOT_LIGHT - Static variable in class nxopen.uf.UFView.LightType
-
- SPOT_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- SPOT_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- SPOT_WELD - Static variable in class nxopen.cae.connections.ConnectionType
-
SpotWeld
- SPOT_WELD - Static variable in class nxopen.uf.UFConstants
-
- SPOT_WELD_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- SPOT_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- SPOT_WELD_NUT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- SPOT_WELD_STUD - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- spotCount - Variable in class nxopen.uf.UFWeld.AskSpotFaceData
-
- spotCount - Variable in class nxopen.uf.UFWeld.AskSpotFaceInfoData
-
- SpotData() - Constructor for class nxopen.uf.UFWeld.SpotData
-
- SpotData(Tag, UFWeld.SpotFaceLoc) - Constructor for class nxopen.uf.UFWeld.SpotData
-
- SpotFaceLoc() - Constructor for class nxopen.uf.UFWeld.SpotFaceLoc
-
- SpotFaceLoc(Tag, double[], double[], String) - Constructor for class nxopen.uf.UFWeld.SpotFaceLoc
-
- SpotFaceLocation() - Constructor for class nxopen.uf.UFWeld.SpotFaceLocation
-
- SpotFaceLocation(Tag, double[], double[]) - Constructor for class nxopen.uf.UFWeld.SpotFaceLocation
-
- spotInfo - Variable in class nxopen.uf.UFWeld.AskSpotFaceData
-
- spotInfo - Variable in class nxopen.uf.UFWeld.AskSpotFaceInfoData
-
- SpotInfo() - Constructor for class nxopen.uf.UFWeld.SpotInfo
-
- SpotInfo(Tag, UFWeld.SpotFaceLocation) - Constructor for class nxopen.uf.UFWeld.SpotInfo
-
- spotPoint - Variable in class nxopen.uf.UFWeld.SpotData
-
- spotPoint - Variable in class nxopen.uf.UFWeld.SpotInfo
-
- SpotWeld - Interface in nxopen.cae.connections
-
Spot Weld connection.
- SPRD_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- SPRD_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- sprDmpType - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- SPRDNT_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- SPRDNT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- SPREADSHEET - Static variable in class nxopen.cae.LaminateViewDrapingResultsBuilder.OuputChoice
-
- spreadsheet() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- spreadsheet() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
Returns the spreadsheet builder.
- spreadsheet() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
Returns the spreadsheet builder.
- SPREADSHEET - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.CreationType
-
- SPREADSHEET - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.Type
-
- spreadsheet() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
Returns the spreadsheet builder.
- SPREADSHEET - Static variable in class nxopen.motion.GraphBuilder.PlotStyleChoices
-
Deprecated.
To Spreadsheet
- SPREADSHEET - Static variable in class nxopen.motion.MotionSolutionBuilder.SolutionTypes
-
Spreadsheet run
- Spreadsheet - Interface in nxopen
-
Represents a class for internal spreadsheet.
- SPREADSHEET - Static variable in class nxopen.Validation.InputType
-
Input rules are from a spreadsheet
- SpreadsheetCellData - Interface in nxopen
-
Represents a class for Spreadsheet cell data.
- SpreadsheetCellData.Types - Class in nxopen
-
Data types enum
- SpreadsheetData - Interface in nxopen.tooling
-
Represents the spreadsheet data which could be standalone spreadsheet file
with special format or be the spreadsheet data from part family template part,
the latter format will not have any other data except the name and value in
class
SpreadsheetDataParameter
, that means
it might not return any result in some methods such as "GetDefinedAttributesExpressions".
- SpreadsheetData.DefinedAttributesExpressionsData - Class in nxopen.tooling
-
- SpreadsheetData.KeywordType - Class in nxopen.tooling
-
Represents the different attribute or expression section in spreadsheet
- SpreadsheetData.ParameterStatus - Class in nxopen.tooling
-
Represents the different spreadsheet parameter status
- SpreadsheetDataParameter - Interface in nxopen.tooling
-
Represents parameter in the spreadsheet.
- SpreadsheetDataParameter.Status - Class in nxopen.tooling
-
Represents the different spreadsheet parameter status
- SpreadsheetExternal - Interface in nxopen
-
Represents a class for external spreadsheet.
- spreadSheetFile() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the parameter spreadsheet file.
- spreadSheetFileName() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
Returns the spreadsheet name which indicates the spreadsheet to be imported or exported.
- spreadsheetItemID() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
Returns the item ID number which indicates the item that the spreadsheet is to be imported from or exported to.
- spreadsheetItemName() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
Returns the item name of the spreadsheet in Teamcenter.
- spreadsheetItemRevision() - Method in interface nxopen.features.vehicledesign.BaseDataImportExportBuilder
-
Returns the item revision of the spreadsheet that is to be imported from or exported to.
- spreadsheetManager() - Method in interface nxopen.Session
-
- SpreadsheetManager - Interface in nxopen
-
Represents a class for interacting with spreadsheets.
- SpreadsheetManager.LookupMode - Class in nxopen
-
Modes of lookup in the table.
- SpreadsheetManager.OpenMode - Class in nxopen
-
Sheet types to open spreadsheet.
- SpreadsheetManager.Sheettype - Class in nxopen
-
Sheet types to open spreadsheet.
- spreadSheetPath() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the parameter spreadsheet path.
- SpreadsheetRunControl - Interface in nxopen.motion
-
- spreadsheetRunFromFile(String, int, int, boolean) - Method in interface nxopen.uf.UFMotion
-
- sPrim - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
-
- sPrim - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
-
- spring() - Method in interface nxopen.cae.BoltBuilder
-
Returns the option to use a spring element to connect the head to the tap surface
License requirements: None.
- SPRING - Static variable in class nxopen.cae.connections.ComposerConnectionType
-
Spring
- SPRING - Static variable in class nxopen.cae.connections.ConnectionType
-
Spring
- Spring - Interface in nxopen.cae.connections
-
Spring connection.
- Spring - Interface in nxopen.motion
-
Represents a spring
To create or edit an instance of this class, use
SpringBuilder
Created in NX6.0.0
- SPRING - Static variable in class nxopen.uf.UFSf.ElementType
-
- SPRING_DASHPOT_FORCE - Static variable in class nxopen.cae.Result.Component
-
- SPRING_DASHPOT_FORCE_X - Static variable in class nxopen.cae.Result.Component
-
- SPRING_DASHPOT_FORCE_Y - Static variable in class nxopen.cae.Result.Component
-
- SPRING_DASHPOT_FORCE_Z - Static variable in class nxopen.cae.Result.Component
-
- SPRING_DASHPOT_MOMENT_X - Static variable in class nxopen.cae.Result.Component
-
- SPRING_DASHPOT_MOMENT_Y - Static variable in class nxopen.cae.Result.Component
-
- SPRING_DASHPOT_MOMENT_Z - Static variable in class nxopen.cae.Result.Component
-
- SPRING_DASHPOT_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- SPRING_DASHPOT_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- SPRING_DASHPOT_STRAIN_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- SPRING_DASHPOT_STRAIN_RESULTANTS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- SPRING_SPRING_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- SPRING_SPRING_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- springAppDirection() - Method in interface nxopen.motion.SpringBuilder
-
Returns the application direction for damper
License requirements: None.
- springbackAngle() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the springback angle of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- SpringbackCompensation - Interface in nxopen.die
-
Represents a springback compensation feature.
- SpringbackCompensationBuilder - Interface in nxopen.die
-
- SpringbackCompensationBuilder.DefinedByType - Class in nxopen.die
-
The type of input data that defines the compensation.
- SpringbackCompensationBuilder.DegreeType - Class in nxopen.die
-
The polynomial degree type.
- SpringbackCompensationBuilder.ResultSheetType - Class in nxopen.die
-
The type of sheet body you would like created as output.
- springbackMethod() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder
-
Returns the springback method
License requirements: None.
- springbackType() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the springback type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- SpringBuilder - Interface in nxopen.motion
-
- SpringCollection - Interface in nxopen.motion
-
Represents a collection of motion spring
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- springConstant() - Method in interface nxopen.mechatronics.AngularSpringJointBuilder
-
Returns the spring constant.
- springConstant() - Method in interface nxopen.mechatronics.LinearSpringJointBuilder
-
Returns the spring constant.
- springConstant() - Method in interface nxopen.mechatronics.SpringDamperBuilder
-
Returns the spring constant.
- springCustomizedSolver() - Method in interface nxopen.motion.SpringBuilder
-
Returns the option of using Customized Solver for damper
License requirements: None.
- SpringDamper - Interface in nxopen.mechatronics
-
Represents the Spring Damper.
- SpringDamper() - Constructor for class nxopen.uf.UFMotion.SpringDamper
-
- SpringDamper(String, UFMotion.SpringDamperType, Tag, Tag, Tag, double[], Tag, Tag, double[], double, double, double, double, double, double) - Constructor for class nxopen.uf.UFMotion.SpringDamper
-
- SpringDamperBuilder - Interface in nxopen.mechatronics
-
- SpringDamperBuilder.AxisJointType - Class in nxopen.mechatronics
-
the Axis Joint types.
- SpringDamperCollection - Interface in nxopen.mechatronics
-
Represents a collection of Spring Damper.
- springDampers() - Method in interface nxopen.mechatronics.PhysicsManager
-
- SpringEADBuilder - Interface in nxopen.cae
-
- SpringEADBuilder.RotationalComponentEnd - Class in nxopen.cae
-
indicates which rotational degree of freedom to use as component end
- SpringEADBuilder.State - Class in nxopen.cae
-
indicates to apply or clear the stiffness property upon commit
- SpringEADBuilder.TranslationalComponentEnd - Class in nxopen.cae
-
indicates which translational degree of freedom to use as component end
- springForceMultiplier() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- springForceMultiplierExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Spring Force Multiplier Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- springInitLength - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- SpringPasses - Interface in nxopen.cam
-
Represents a spring passes .
- springPasses() - Method in interface nxopen.cam.ThreadMillingBuilder
-
Returns the spring passes
License requirements: None.
- springPasses() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the spring passes
License requirements: None.
- SpringPasses.Types - Class in nxopen.cam
-
the alternate spring passes options .
- springPeriod(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the period in the spring-mass system.
- springPotentialEnergy(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the potential energy in the spring-mass system.
- springPreload - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- springRate - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- springRefAngle - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- springRefLength - Variable in class nxopen.uf.UFMotion.SpringDamper
-
- springRestoringForce(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the restoring force in the spring-mass system.
- springs() - Method in interface nxopen.motion.MotionManager
-
- SPRSHT_FILE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- SPRSHT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- SPRUNG - Static variable in class nxopen.die.SpringbackCompensationBuilder.ResultSheetType
-
Sprung sheet body.
- SPRUNG_MASS - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- sprungFacets() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the sprung facets.
- sprungPointsFile() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the sprung points file name.
- SpunOutlineGeom - Interface in nxopen.cam
-
Represents a spun outline geometry object for turning boundary .
- SpunOutlineGeom.CreationTypes - Class in nxopen.cam
-
the creation methods
- SpunOutlineGeom.PlanesAtAnglesData - Class in nxopen.cam
-
- SpunOutlineGeom.PlanesThroughPointsData - Class in nxopen.cam
-
- SPUR_GEAR_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- spurGearAddendum(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the addendum from the module.
- spurGearAngularBacklash(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the angular backlash from linear backlash along pitch circle.
- spurGearBaseCircleDiameter(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the base circle diameter from the pitch diameter and pressure
angle.
- spurGearBasePitch(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the base pitch from the module and pressure angle.
- spurGearCenterDistance(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the center distance from the module and number of teeth.
- spurGearCircularPitch1(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the circular pitch from module.
- spurGearCircularPitch2(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the circular pitch from the pitch diameter and number of teeth.
- spurGearContactRatio(double, double, double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the contact ratio from outside radii, base-circle radii, center
distance and pressure angle.
- spurGearDedendum(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the dedendum from the module.
- spurGearLinearBacklash1(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the linear backlash along pitch circle from change in center
distance and pressure angle.
- spurGearLinearBacklash2(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the linear backlash along pitch circle from change in tooth
thickness.
- spurGearLinearBacklash3(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the linear backlash along line of action from linear backlash
along pitch circle.
- spurGearMinimumNumberNoUndercutting(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the min. number teeth for no undercutting from pressure angle.
- spurGearModule(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the module from the diametral pitch.
- spurGearNumberOfTeeth(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the number of teeth from the module and pitch diameter.
- spurGearOutsideDiameter1(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the outside diameter from the module and pitch diameter.
- spurGearOutsideDiameter2(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the outside diameter from the module and number of teeth.
- spurGearPitchDiameter(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the pitch diameter from module.
- spurGearRootDiameter(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the root diameter from pitch diameter and module.
- spurGearToothThickness(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the tooth thickness at standard pitch diameter from module.
- SQUARE - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType
-
Square
- SQUARE - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceZoneShape
-
square
- SQUARE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Square
- SQUARE - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Square symbol
- SQUARE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- SQUARE - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ZoneShapeOptions
-
square
- SQUARE - Static variable in class nxopen.cae.MarkerType0d
-
- SQUARE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Square marker
- SQUARE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Square marker
- SQUARE - Static variable in class nxopen.cae.xyplot.PointMarker
-
Square marker
- SQUARE - Static variable in class nxopen.cam.InspectionCparlnFeatureBuilder.EndTypes
-
Bounded slot/tab has square end
- SQUARE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinmaxAreaUnits
-
Square length.
- SQUARE - Static variable in class nxopen.cam.TurningToolBuilder.HolderShankTypes
-
Square Shank
- SQUARE - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Square
- SQUARE - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Square shaped hole
- SQUARE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType
-
Deprecated.
- SQUARE - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SymbolType
-
- SQUARE - Static variable in class nxopen.features.sheetmetal.BendOptions.BendReliefTypeOptions
-
igRectangularBendRelief
- SQUARE - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperType
-
Square
- SQUARE - Static variable in class nxopen.features.sheetmetal.ConvertToSheetmetalBuilder.BendReliefTypeOptions
-
- SQUARE - Static variable in class nxopen.features.sheetmetal.GussetBuilder.Shapes
-
Specifies a square shape for the Gusset
- SQUARE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.BendReliefOptions
-
- SQUARE - Static variable in class nxopen.features.sheetmetal.ResizeBendRadiusBuilder.BendReliefTypeOptions
-
- SQUARE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- SQUARE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- SQUARE - Static variable in class nxopen.geometricutilities.QuadrilateralFrameBuilder.Subtypes
-
Square
- SQUARE - Static variable in class nxopen.geometricutilities.RectangularPattern.SimplifiedLayoutTypes
-
Square Layout
- SQUARE - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.CagePolylineVertexStyles
-
- SQUARE - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
-
- SQUARE - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
- SQUARE - Static variable in class nxopen.tooling.UndersizeBuilder.Orbit
-
square
- SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- SQUARE_BUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- SQUARE_BUTT - Static variable in class nxopen.annotations.Symbol
-
Specifies square butt weld symbol
- SQUARE_BUTT - Static variable in class nxopen.weld.WeldGrooveBuilder.Types
-
Square Butt
- SQUARE_BUTT - Static variable in class nxopen.weld.WeldGrooveShape
-
Square butt shape
- SQUARE_CUT - Static variable in class nxopen.features.shipdesign.PlateBoundaryOptionBuilder.SplitKnuckleTypes
-
The plate side faces at knuckle edge are normal to the molding face.
- SQUARE_CUT - Static variable in class nxopen.features.shipdesign.PlateBoundaryOptionBuilder.TrimTypes
-
The plate side face is normal to the molding face.
- SQUARE_CUT - Static variable in class nxopen.features.shipdesign.StiffenerLimitBuilder.LimitType
-
Stiffener will extend into limiting geometry.
- SQUARE_DRAWING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
square drawing
- SQUARE_IN_SQUARE - Static variable in class nxopen.cae.MarkerType0d
-
- SQUARE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- SQUARE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- squareBottomSupportedUniformLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a square flat plate supported at the bottom only
of all four edges under a uniformly distributed load over the surface of the plate.
- squareBottomSupportedUniformLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a square flat plate supported at the bottom
only of all four edges under a uniformly distributed load over the surface of the plate.
- squareCutClearance() - Method in interface nxopen.features.shipdesign.StiffenerLimitBuilder
-
Returns the limit clearance value
License requirements: None.
- squareEdgesFixedCenterLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a square flat plate with all edges firmly
fixed under a uniformly distributed load over the surface of the plate.
- squareEdgesFixedCenterLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a square flat plate with all edges firmly
fixed under a uniformly distributed load over the surface of the plate.
- squareEdgesFixedCircularCenterLoadDeflection(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a square flat plate with all edges firmly
fixed under a uniform load over small circular area at the center.
- squareEdgesFixedCircularCenterLoadStress(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a square flat plate with all edges firmly
fixed under a uniform load over small circular area at the center.
- squareEdgesSupportedCenterLoadDeflection(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a square flat plate with all edges supported
above and below, or below only under a concentrated load at the center.
- squareEdgesSupportedCenterLoadStress(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a square flat plate with all edges supported
above and below, or below only under a concentrated load at the center.
- squareTopBottomSupportedUniformLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a square flat plate supported at top and bottom
of all four edges under a uniformly distributed load over the surface of the plate.
- squareTopBottomSupportedUniformLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a square flat plate supported at top and bottom
of all four edges under a uniformly distributed load over the surface of the plate.
- SR - Static variable in class nxopen.annotations.RadiusSymbol
-
Specifes SR symbol
- SR - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions
-
SR
- sr1Left() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left SR1 alternative point.
- sr1LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left SR1 alternative point flag.
- sr1Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the offset used to position SR1.
- sr1Right() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right SR1 alternative point.
- sr1RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right SR1 alternative point flag.
- sr2ALeft() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left SR2A alternative point.
- sr2ALeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left SR2A alternative point flag.
- sr2ARight() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right SR2A alternative point.
- sr2ARightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right SR2A alternative point flag.
- sr2BLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left SR2B alternative point.
- sr2BLeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the left SR2B alternative point flag.
- sr2BRight() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right SR2B alternative point.
- sr2BRightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the right SR2B alternative point flag.
- sr2Left() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
- sr2LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
- sr2Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the offset used to position SR2.
- sr2Right() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
- sr2RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
- sr3Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the left SR3 alternative point.
- sr3Left() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder
-
Returns the left additional Side Rail 3 point.
- sr3LeftFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the left SR3 alternative point flag.
- sr3Offset() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the offset used to position SR3.
- sr3Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the right SR3 alternative point.
- sr3Right() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailWizardBuilder
-
Returns the right additional Side Rail 3 point.
- sr3RightFlag() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the right SR3 alternative point flag.
- SrfanlData() - Constructor for class nxopen.uf.UFDisp.SrfanlData
-
- SrfanlData(double, double[], double[], double, double, double, double, double, double, int, int, int, int, int, int, int, int, int, int, String, int, int, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int, double, double, int, int, int) - Constructor for class nxopen.uf.UFDisp.SrfanlData
-
- srfD2u - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfD2udv - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfD2v - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfD3u - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfD3v - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfDu - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfDud2v - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfDudv - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfDv - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfNormal - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfPos - Variable in class nxopen.uf.UFModl.Srfvalue
-
- srfUnormal - Variable in class nxopen.uf.UFModl.Srfvalue
-
- Srfvalue() - Constructor for class nxopen.uf.UFModl.Srfvalue
-
- Srfvalue(double[], double[], double[], double[], double[], double[], double[], double[], double[], double[], double[], double[]) - Constructor for class nxopen.uf.UFModl.Srfvalue
-
- SRS - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.MultipleExcitationCombinationMethod
-
- SRSS - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
-
- srsToTime(String, int, AfuMathOperation.SrsToTimeOption, double, int, int, AfuMathOperation.SrsToTimeOctave, int, AfuMathOperation.SrsToTimeStrategy, boolean, String, String) - Method in interface nxopen.cae.AfuMathOperation
-
Convert SRS to Time
License requirements: None.
- ssaoBlurRadius() - Method in interface nxopen.display.Shadows
-
Returns the shadows SSAO Blur Radius
License requirements: None.
- ssaoContrast() - Method in interface nxopen.display.Shadows
-
Returns the shadows SSAO contrast
License requirements: None.
- ssaoQuality() - Method in interface nxopen.display.Shadows
-
Returns the shadows SSAO quality
License requirements: None.
- ssaoRadius() - Method in interface nxopen.display.Shadows
-
Returns the shadows SSAO radius
License requirements: None.
- ssCol - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- sSection - Variable in class nxopen.uf.UFModlFeatures.AskBplaneData
-
- sSection - Variable in class nxopen.uf.UFModlFeatures.AskRuled1Data
-
- sSection - Variable in class nxopen.uf.UFModlFeatures.AskRuledData
-
- sSection - Variable in class nxopen.uf.UFModlFeatures.AskSweepData
-
- sSection - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- sSection - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- SSHAPED - Static variable in class nxopen.geometricutilities.LawBuilder.Type
-
S-shaped law type
- sshapedLaw() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the s-shaped law.
- SShapedLawBuilder - Interface in nxopen.geometricutilities
-
Represents a s-shaped law.
- SSL_HEADER - Static variable in class nxopen.ame.PlcDataType
-
- ssoappid - Variable in class nxopen.pdm.PdmSession.SsoSettingsData
-
the SSO app id
- ssoserverurl - Variable in class nxopen.pdm.PdmSession.SsoSettingsData
-
the SSO server URL
- SsoSettingsData() - Constructor for class nxopen.pdm.PdmSession.SsoSettingsData
-
- sSpine - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
-
- sSpine - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
-
- sSpine - Variable in class nxopen.uf.UFModlFeatures.AskRuled1Data
-
- sSpine - Variable in class nxopen.uf.UFModlFeatures.AskRuledData
-
- sSpine - Variable in class nxopen.uf.UFModlFeatures.AskSweepData
-
- sSpine - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- sSpine - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- ssRow - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- ssSheet - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- STACK_ALIGN_ABOVE - Static variable in class nxopen.uf.UFDrf.StackAlignPosition
-
- STACK_ALIGN_BELOW - Static variable in class nxopen.uf.UFDrf.StackAlignPosition
-
- STACK_ALIGN_LEFT - Static variable in class nxopen.uf.UFDrf.StackAlignPosition
-
- STACK_ALIGN_RIGHT - Static variable in class nxopen.uf.UFDrf.StackAlignPosition
-
- STACK_UP_GAP - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
stack up gap
- stackAboveSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the stack above spacing factor for space buffer above annotation in stack.
- stackAboveSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the stack above space factor.
- stackAlignmentPosition - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
- StackAlignmentPosition - Class in nxopen.annotations
-
Specifies the site location of a stack
- stackAlignmentPosition - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- stackAnnotation - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- stackAutospace() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the flag indicating whether to automatically set the stack spacing to system derived values
License requirements: None.
- stackAutospace() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the stack autospace setting.
- stackBelowSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the stack below spacing factor for space buffer below annotation in stack.
- stackBelowSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the stack below space factor.
- STACKED - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageConstructionEnum
-
Stacked
- StackedPlot - Interface in nxopen.cae.xyplot
-
Manages the display of stacked plot.
- stackHorizontalAlignment() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the stack horizontal(left/right) alignment option
License requirements: None.
- stackHorizontalAlignment() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the stack horizontal alignment
License requirements: None.
- StackHorizontalAlignment - Class in nxopen.annotations
-
Specifies the horizontal alignment(left/right alignment) option
when aligning annotations within a stack
- stackingRecipe() - Method in interface nxopen.cae.LaminateGlobalLayup
-
Returns the global layup stacking recipe
License requirements: nx_lam_composites ("Laminate Composites")
.
- stackInheritAssociatedObjects() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the flag indicating whether to inherit the associated objects of a stack when
an annotation is inserted into a stack.
- stackInheritAssociatedObjects() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the stack inherit associated objects setting.
- stackLeftSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the stack left spacing factor for space buffer left annotation in stack.
- stackLeftSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the stack left space factor.
- stackRightSpaceFactor() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the stack right spacing factor for space buffer right annotation in stack.
- stackRightSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the stack right space factor.
- stackVerticalAlignment() - Method in interface nxopen.annotations.LetteringPreferences
-
Returns the stack vertical(above/below) alignment option
License requirements: None.
- stackVerticalAlignment() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the stack vertical alignment
License requirements: None.
- StackVerticalAlignment - Class in nxopen.annotations
-
Specifies the vertical alignment(above/below alignment) option
when aligning annotations within a stack
- staffLength - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
-
- STAGE - Static variable in class nxopen.display.ImageBasedLighting.ImagesType
-
Use the stage.
- STAGE - Static variable in class nxopen.display.Reflection.Type
-
use the stage for reflections
- stage() - Method in interface nxopen.display.Scene
-
Returns the stage - use to optionally define a box that can have between
one and six visible "walls"
License requirements: None.
- Stage - Interface in nxopen.display
-
Represents a
Stage
A stage is an environment cube, a six-sided room, that can have between
one and six visible walls.
- Stage.OrientationType - Class in nxopen.display
-
Represents an index to a floor plane type define
- Stage.WallType - Class in nxopen.display
-
Represents an index to a particular wall in the
stage.
- STAGGER_RAMP_ON_PART - Static variable in class nxopen.cam.LevelToLevel.Types
-
Staggered ramp on part
- staggerDistanceList() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the list of stagger distances defined the shift distance to create the seam.
- STAGGERED_SYMBOL - Static variable in class nxopen.annotations.LineWeldBuilder.StaggeredWeldType
-
- STAGGERED_SYMBOL_WELD_SIDE - Static variable in class nxopen.annotations.LineWeldBuilder.StaggeredWeldType
-
- staggeredFlag - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- staggeredWeld() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the staggered weld
License requirements: None.
- staggeredWeldSymbolDisplay() - Method in interface nxopen.annotations.LineWeldData
-
Returns the flag indicating whether the staggered weld symbol is displayed
License requirements: None.
- staggerShiftAlongMethod() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the method used to define the seam stagger shift along method.
- staggerType() - Method in interface nxopen.geometricutilities.CircularPattern
-
Returns the type of stagger to be used by the pattern
License requirements: None.
- staggerType() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the type of stagger to be used by the pattern
License requirements: None.
- stairNosing() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the stair nosing
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- StairwayEquipmentBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createStairwayEquipmentBuilder
Default values.
- stairWidth() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the stair width
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- STAKE - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- STAKE - Static variable in class nxopen.annotations.Symbol
-
Specifies fillet weld symbol
- STAMP - Static variable in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType
-
The element group is demolded keeping a stampable structure
- STAMPING_DIE - Static variable in class nxopen.tooling.ToolingApplication
-
Stamping Die
- stampingOperation() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the stamping operation
License requirements: die_engineering ("DIE ENGINEERING")
.
- stampingOutput() - Method in interface nxopen.die.FaceSheetBuilder
-
Returns the stamping output feature of the Face Sheet
License requirements: die_engineering ("DIE ENGINEERING")
.
- stampingOutput() - Method in interface nxopen.tooling.DieEngStampingCarryoverBuilder
-
Returns the stamping output
License requirements: None.
- STAND_ALONE - Static variable in class nxopen.drawings.SectionViewBuilder.SectionViewModeType
-
- STAND_ALONE - Static variable in class nxopen.drawings.SketchSectionLineBuilder.Type
-
- STANDALONE - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.TemplateTypeEnum
-
- STANDALONE - Static variable in class nxopen.Part.Relations
-
no master model support
- standaloneFilterFormatFile() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the option to export the XML routelist data with the formats and
filters information separately.
- standAloneInsertSheet() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
Returns the flag indicating whether to automatically starts the insert sheet command when entering the drafting application
if no drawing sheets exist.
- standAloneProjectedView() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
Returns the flag indicating whether to automatically starts the projected view command after inserting a drawing view.
- standAloneProjectToView() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
Returns the flag indicating whether to automatically starts the projected view command after inserting a projected drawing view.
- standAloneViewCreation() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
Returns the flag indicating whether to automatically starts the drawing view command after inserting a sheet with no views.
- STANDARD - Static variable in class nxopen.ame.FormSheetBuilder.SizeOption
-
- STANDARD - Static variable in class nxopen.ame.PlcDataTypeSource
-
- STANDARD - Static variable in class nxopen.annotations.DiameterSymbol
-
Specifies standard symbol
- standard() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the standard
License requirements: None.
- STANDARD - Static variable in class nxopen.cae.PolygonGeometryManager.PolygonBodyResolutionType
-
- STANDARD - Static variable in class nxopen.cae.responsesimulation.RSEvent.DdamFormulationType
-
- STANDARD - Static variable in class nxopen.cae.xyplot.Fonttype
-
Standard Font
- STANDARD - Static variable in class nxopen.cam.CutParametersRegionSequencingTypes
-
standard
- STANDARD - Static variable in class nxopen.cam.InspectionMethodBuilder.ProfileDispositionTypes
-
Standard
- STANDARD - Static variable in class nxopen.cam.OperationBuilder.OptimizationLevelTypes
-
standard
- STANDARD - Static variable in class nxopen.cam.ThreadToolBuilder.InsertShapes
-
Standard insert shape
- STANDARD - Static variable in class nxopen.diagramming.Method
-
Standard
- STANDARD - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.ZoneMethod
-
Standard
- STANDARD - Static variable in class nxopen.die.FlangeTaskBuilder.PierceTypes
-
Use Standard tolerance.
- STANDARD - Static variable in class nxopen.die.PierceTaskBuilder.PrecisionTypes
-
Standard hole
- STANDARD - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
Standard lens
- STANDARD - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
-
- STANDARD - Static variable in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
-
- STANDARD - Static variable in class nxopen.drawings.BordersAndZonesBuilder.ZoneMethod
-
Deprecated.
Standard
- STANDARD - Static variable in class nxopen.drawings.Method
-
Standard
- standard() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- STANDARD - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
Length is Standard
- STANDARD - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType
-
Default surface creation method
- STANDARD - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CompensationType
-
- STANDARD - Static variable in class nxopen.features.vehicledesign.BaseDataLoadingBuilder.LoadingType
-
Standard - Defined in the registration file, user can not delete it.
- standard() - Method in interface nxopen.features.vehicledesign.BumperPendulumBuilder
-
Returns the standard used to define the bumper pendulum.
- standard() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the standard types to define the close range visibility.
- standard() - Method in interface nxopen.features.vehicledesign.CrashBarrierBuilder
-
Returns the standard used to define the crash barrier.
- standard() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the standard used to define the dynamic curb.
- standard() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the standard to be used for this ground clearance feature.
- standard() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the standard used for this head impact study.
- standard() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
Returns the standard used to define the inner angle.
- standard() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the standard used to define the manikin
License requirements: None.
- standard() - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
Returns the standard used to define the oil pan.
- standard() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the standard that should be used in the analysis
License requirements: None.
- standard() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the standard for seat belt anchorage
License requirements: None.
- standard() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the standard used to define the slope.
- standard() - Method in interface nxopen.features.vehicledesign.StaticCurbBuilder
-
Returns the standard used to define the static curb.
- STANDARD - Static variable in class nxopen.features.vehicledesign.VisionPlaneBuilder.CustomVisionAngle
-
standard
- standard() - Method in interface nxopen.features.vehicledesign.WheelCoveringBuilder
-
Returns the standard used to define the wheel covering.
- standard() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
Returns the standard used to define the wheel fixing.
- STANDARD - Static variable in class nxopen.features.vehicledesign.WindshieldDatumBuilder.CustomVisionAngle
-
standard
- STANDARD - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
-
- STANDARD - Static variable in class nxopen.FontCollection.Type
-
Standard system font
- STANDARD - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
-
Standard
- STANDARD - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
Length is standard
- STANDARD - Static variable in class nxopen.ListCreator.ResolutionType
-
Standard
- STANDARD - Static variable in class nxopen.motion.BushingDefine.ForceCalculationOption
-
Standard
- STANDARD - Static variable in class nxopen.PlotBuilder.PlotTypes
-
Standard Plot
- STANDARD - Static variable in class nxopen.preferences.GeneralToleranceOption
-
Standard
- STANDARD - Static variable in class nxopen.preferences.PartModeling.GridResolutionType
-
Standard grid resolution
- STANDARD - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
-
Standard
- STANDARD - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
-
For Standard: Facet Edge Tolerance is 0.005, Facet
Chord Tolerance is 0.005 , and Angular Tolerance is 15
- STANDARD - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType
-
- STANDARD - Static variable in class nxopen.preferences.ShadingToleranceOption
-
Standard
- STANDARD - Static variable in class nxopen.tooling.BendInsertDesignBuilder.Types
-
standard insert
- STANDARD - Static variable in class nxopen.tooling.DieBaseBuilder.SplitOption
-
- STANDARD - Static variable in class nxopen.tooling.FormingInsertBuilder.BlankTypes
-
standard blank.
- STANDARD - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes
-
- standard - Variable in class nxopen.uf.UFPart.CompressFlags
-
- STANDARD - Static variable in class nxopen.uf.UFUgfont.Type
-
- STANDARD_ANGLES - Static variable in class nxopen.formboard.FormboardLayoutBuilder.BranchAngle
-
Apply a standard angle to the branch,
the level of the branch determines
which angle to apply.
- STANDARD_DEV - Static variable in class nxopen.cae.LaminateRandomEventBuilder.ConfidenceLevelOptionEnum
-
- STANDARD_DIAMETER_SYMBOL - Static variable in class nxopen.uf.UFDrf.DiameterSymbol
-
- STANDARD_DIE_BASE - Static variable in class nxopen.tooling.DieBaseBuilder.Types
-
standard die base
- STANDARD_DRIVE - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Standard Drive
- STANDARD_DRIVE - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
Standard Drive
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.BumperPendulumBuilder.RequirementsControlType
-
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.RequirementsControlType
-
Standard driven type
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.RequirementsControlsControlType
-
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.RequirementsControlType
-
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.RequirementControls
-
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.HeadImpactBuilder.RequirementsControlType
-
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.RequirementsControlType
-
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.RequirementsControlType
-
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.RequirementsControlType
-
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.RequirementsControlType
-
Standard Driven
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.RequirementsControlType
-
Represents the option for reading parameters from the config file
- STANDARD_DRIVEN - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.RequirementsControlType
-
- STANDARD_FONTS_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- STANDARD_FONTS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- STANDARD_INSERT - Static variable in class nxopen.tooling.DieInsertBuilder.InsertModeItems
-
The die insert mode is standard insert
- STANDARD_INTERFERENCE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Check standard part interference
- STANDARD_ORIENTATION_BACK - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_BOTTOM - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_DIMETRIC - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_FRONT - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_ISOMETRIC - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_LEFT - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_NONE - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_NUM_TYPES - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_RIGHT - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_TOP - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_ORIENTATION_TRIMETRIC - Static variable in class nxopen.uf.UFView.StandardOrientation
-
- STANDARD_PART - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- STANDARD_PART_BRACKET - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- STANDARD_PART_BRACKET_DIVIDE - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types
-
The data represents a standard part bracket divide feature.
- STANDARD_PART_COLLAR_PLATE - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- STANDARD_SIZE - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetOption
-
a standard size drawing sheet
- STANDARD_SYMBOL - Static variable in class nxopen.ame.SymbolAuthoringBuilder.Types
-
- STANDARD_TEXT_LISTING - Static variable in class nxopen.cam.InspectionAnalyzeOutputBuilder.OutputFormatType
-
Standard Text Listing
- STANDARD_WIDTHS - Static variable in class nxopen.CGMBuilder.Width
-
Standard Widths
- STANDARD_WIDTHS - Static variable in class nxopen.PlotColorsWidthsBuilder.Width
-
Standard Widths
- STANDARD_WIDTHS - Static variable in class nxopen.PrintPDFBuilder.Width
-
Standard Widths
- STANDARD_WIDTHS - Static variable in class nxopen.uf.UFCgm.Widths
-
- STANDARD_WIDTHS - Static variable in class nxopen.uf.UFPlot.Widths
-
- StandardBeamSection - Interface in nxopen.cae
-
Represents a Standard Beam Cross Section
To create or edit an instance of this class, use
StandardBeamSectionBuilder
Created in NX7.5.0
- StandardBeamSectionBuilder - Interface in nxopen.cae
-
- standardData() - Method in interface nxopen.drawings.ViewStyleThreadsBuilder
-
Returns the standard option data on the THREADS tab of the View Style Dialog
License requirements: None.
- standardData() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the electrode standard data spraedsheet.
- standardDeviation() - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
Returns the number of standard deviations used to calculate the confidence level
License requirements: None.
- standardDeviation() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
Returns the customized standard deviation for random event
License requirements: nx_response_anlys ("NX Response Analysis")
.
- standardDieInsert() - Method in interface nxopen.tooling.DieInsertBuilder
-
Insert the standard die by invoking standard part management dialog
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- standardEnglishScale() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the standard English drawing scale
License requirements: None.
- standardFontStyle() - Method in interface nxopen.blockstyler.TextColorFontWidth
-
Returns the standard font style.
- standardMetricScale() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the standard Metric drawing scale
License requirements: None.
- standardName() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the standard name
License requirements: None.
- standardName() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
Returns the standard name selected
License requirements: None.
- standardOrUserDefined() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the standard or user defined split option
License requirements: None.
- standardOrUserDefined() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the standard or user defined
License requirements: None.
- StandardPart - Interface in nxopen.features.shipdesign
-
Represents a standard part feature.
- standardPart() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the electrode standard part to be installed.
- standardPart() - Method in interface nxopen.tooling.ToolingManager
-
Returns the StandardPartCollection instance belonging to this part .
- StandardPartBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to create Mold Wizard Standard Part.
- StandardPartBuilder.EditType - Class in nxopen.tooling
-
Represents the type to edit a standard part.
- StandardPartBuilder.RefsetName - Class in nxopen.tooling
-
Represents the reference set of the standard part when it is added to the assembly.
- standardPartClassificationName() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the standard part classification name for punch insert.
- StandardPartCollection - Interface in nxopen.tooling
-
Creates a StandardPartCollection class
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- standardPartComponent() - Method in interface nxopen.tooling.StandardPartBuilder
-
Returns the standard part component which is selected to be edited.
- StandardPartData - Interface in nxopen.tooling
-
Represents the standard part client data.
- standardPartEditType() - Method in interface nxopen.tooling.StandardPartBuilder
-
Returns the standard part edit type of processing the selected component.
- StandardPartFrameworkBuilder - Interface in nxopen.features.shipdesign
-
Represents the standard part framework builder to add or edit ship standard part.
- StandardPartFrameworkBuilder.CheckSpreadsheetInputData - Class in nxopen.features.shipdesign
-
- StandardPartFrameworkBuilder.CreationType - Class in nxopen.features.shipdesign
-
Indicates the creation type
- StandardPartFrameworkBuilder.RunSmartRuleData - Class in nxopen.features.shipdesign
-
- StandardPartFrameworkBuilder.SmartRuleStage - Class in nxopen.features.shipdesign
-
Indicates the stage of the smart rule.
- standardPartGroupOption() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the option whether to group multiple standard parts together to share the same parameters during the update when editing.
- standardPartItem() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the standard part item, which is the builder of the selection item.
- StandardPartItemBuilder - Interface in nxopen.features.shipdesign
-
Represents the ship standard part item builder.
- StandardPartItemBuilder.Direction - Class in nxopen.features.shipdesign
-
Represents the ship standard part installation direction and thickness direction.
- StandardPartItemBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- standardPartList() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the standard part list, which supports to add more than one standard part at one time.
- standardPartPosition() - Method in interface nxopen.tooling.ToolingManager
-
Returns the StandardPartCollection instance belonging to this part .
- StandardPartPositionBuilder - Interface in nxopen.tooling
-
Represents a StandardPartPositionBuilder to add or edit a standard part in the selected plane with specified position.
- StandardPartPositionCollection - Interface in nxopen.tooling
-
Creates a StandardPartPositionCollection class
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.5.0
- StandardPartSCAssist - Interface in nxopen.features.shipdesign
-
- standardPunchInsert() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Load standard punch for normal pierce design.
- standardPunchTag() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the standard punch tag.
- StandardSection - Interface in nxopen.motion
-
Represents a standard beam section
To create or edit an instance of this class, use
StandardSectionBuilder
Created in NX12.0.0
- StandardSectionBuilder - Interface in nxopen.motion
-
- StandardSectionBuilder.StandardSectionType - Class in nxopen.motion
-
the standard section type
- StandardViewsBuilder - Interface in nxopen.drawings
-
- StandardViewsBuilder.Placement - Class in nxopen.drawings
-
The view Layout placement type (deprecated)
- StandardViewsBuilder.Type - Class in nxopen.drawings
-
The view Layout type
- StandardViewsBuilder.View - Class in nxopen.drawings
-
The view type to create
- standoffDistance() - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
Returns the standoff distance
License requirements: None.
- STAR - Static variable in class nxopen.display.CameraBuilder.LensFlare
-
star lens
- STARBOARD - Static variable in class nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder.OrientationType
-
Starboard Orientation
- STARBOARD - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.SymmetricalStructureOptions
-
Only show starboard side of the bulkhead section view.
- STARBOARD - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.YDirectionType
-
- STARBOARD - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
starboard
- start() - Method in interface nxopen.ame.PageNamingBuilder
-
Returns the start name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- start() - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder
-
Returns the start object of Symmetrical Centerline
License requirements: None.
- START - Static variable in class nxopen.cae.MeshControlBuilder.ProgressionTypes
-
- START - Static variable in class nxopen.cae.MeshControlBuilder.SizeTypes
-
- START - Static variable in class nxopen.cae.xyplot.AnchorType
-
the position of start point in a record display
- START - Static variable in class nxopen.cam.CAMSetup.Ude
-
start UDE
- start() - Method in interface nxopen.cam.PitchSetting
-
Returns the start
License requirements: None.
- START - Static variable in class nxopen.cam.WedmOperationBuilder.InPathUdeSetTypes
-
in path ude set at start
- start - Variable in class nxopen.DatumAxis.EndPointsData
-
Start point of datum axis
- start() - Method in interface nxopen.diagramming.ConnectionBuilder
-
Returns the start port of this connection.
- START - Static variable in class nxopen.diagramming.DiagrammingConnectionlabelposition
-
Start
- START - Static variable in class nxopen.diagramming.DiagrammingRepeatstartposition
-
Start
- START - Static variable in class nxopen.diagramming.tables.HeaderLocation
-
Start header location
- start() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the location for the start of the segment definition.
- start() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the start length extension.
- start() - Method in interface nxopen.die.RibChildBuilder
-
Returns the start limit geometry of the die rib.
- start(View) - Method in interface nxopen.display.NonProportionalZoom
-
Prepares NX to receive one or more gestures delimited by pairs of points
which define a non-proportional zoom.
- START - Static variable in class nxopen.features.DivideCurveBuilder.InputArcLengthDirectionFlag
-
Input Arc length from start
- START - Static variable in class nxopen.features.SectionSurfaceBuilder.ControlRegionEnum
-
Deprecated.
depth and skew applied to the start section of the section surface
- START - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ControlRegionType
-
depth and skew applied to the start section of the section surface
- START - Static variable in class nxopen.features.sheetmetal.MiterOptions.PositionOptions
-
miter is done at the beginning
- START - Static variable in class nxopen.features.shipdesign.OrientationAngleMethodsBuilder.AlignAtTypes
-
- START - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.CornerCutTypes
-
Add corner cuts on the start side of each template.
- START - Static variable in class nxopen.features.TrimCurveBuilder.CurveEndOptions
-
Trim curve from start
- START - Static variable in class nxopen.features.TrimCurveBuilder.FirstBoundingObjectEndOptions
-
Trim first bounding object from start
- START - Static variable in class nxopen.features.TrimCurveBuilder.SecondBoundingObjectEndOptions
-
Trim second ounding object from start
- start() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- START - Static variable in class nxopen.geometricutilities.CurveRangeBuilder.AnchorPositionType
-
Anchor at the start of the curve
- start() - Method in interface nxopen.geometricutilities.CurveRangeBuilder
-
Returns the start
License requirements: None.
- START - Static variable in class nxopen.geometricutilities.ExtensionSide
-
Extension Side Start
- START - Static variable in class nxopen.geometricutilities.RegionTracker.ExtremityType
-
start
- START - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point start
- START - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.HealOrientation
-
- START - Static variable in class nxopen.mechatronics.MechatronicsSession.SimulationAction
-
Start
- start(String, boolean) - Method in interface nxopen.MovieManager
-
Starts movie recording
License requirements: None.
- START - Static variable in class nxopen.pid.ConnectionEndType
-
The start of connection.
- START - Static variable in class nxopen.routing.HandrailBuilder.PostTypes
-
- START - Static variable in class nxopen.routing.OverstockBuilder.PointType
-
Start
- START - Static variable in class nxopen.routing.PointDefinition
-
The point defines the start of the overstock application.
- START - Static variable in class nxopen.routing.ProfileFrom
-
Profile is at the start of the first segment.
- START - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode
-
START
- start() - Method in interface nxopen.sim.TimeAnalysis
-
Start the Time Analysis
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- START - Static variable in class nxopen.tooling.DieEngTrimTaskBuilder.TrimTaskMatchCutType
-
- START - Static variable in class nxopen.uf.UFCurve.EndType
-
- start - Variable in class nxopen.uf.UFDraw.TabnotLine
-
- start - Variable in class nxopen.uf.UFEval.Line
-
- start - Variable in class nxopen.uf.UFPath.CircularMotion
-
- start - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- start - Variable in class nxopen.uf.UFRoute.AskSegmentEndPntsData
-
- start - Variable in class nxopen.uf.UFStudio.StybldCurveTrans
-
- start - Variable in class nxopen.uf.UFStudio.StybldShapeTrans
-
- START_AND_END - Static variable in class nxopen.annotations.OrdinateDoglegDefinition
-
Specifies start and end offeset defined
- START_AND_END - Static variable in class nxopen.annotations.SymmetricalCenterlineBuilder.Types
-
Centerline from start and end point
- START_AND_END - Static variable in class nxopen.cae.MeshControlBuilder.SizeTypes
-
- START_AND_END - Static variable in class nxopen.cam.PitchSetting.VarianceTypes
-
Start and End
- START_AND_END - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Fix start and end
- START_AND_END_POINT - Static variable in class nxopen.cam.TabPointDataBuilder.TabMethodType
-
Start and End point
- START_AND_INCREMENT - Static variable in class nxopen.cam.PitchSetting.VarianceTypes
-
Start and Increment
- START_ANGLE - Static variable in class nxopen.annotations.OrdinateDoglegDefinition
-
Specifies start offset and dogleg angle defined
- START_END - Static variable in class nxopen.geometricutilities.ExtensionSide
-
Extension Side Start/End
- START_END_POINT - Static variable in class nxopen.cae.responsesimulation.ResponseDomainDefinitionMethod
-
- START_OF_CONIC_MOTION - Static variable in class nxopen.cam.ToolpathEventType
-
- START_OF_PASS - Static variable in class nxopen.cam.ToolpathEventType
-
- START_OF_PATH - Static variable in class nxopen.cam.ToolpathEventType
-
- START_ONLY - Static variable in class nxopen.tooling.RunnerBuilder.GuideEndType
-
Use the start point only.
- START_POINT - Static variable in class nxopen.MeasureManager.EndpointType
-
- START_POINT - Static variable in class nxopen.Sketch.AssocType
-
Start point.
- START_POINT - Static variable in class nxopen.uf.UFGexp.Qualifier
-
- START_POINT_OUTPUT - Static variable in class nxopen.cam.ToolpathEventType
-
- START_SET - Static variable in class nxopen.uf.UFUde.SetType
-
- START_TO_END - Static variable in class nxopen.weld.WeldPointDirection
-
Direction is from start to end
- START_VERTEX - Static variable in class nxopen.Sketch.ConstraintPointType
-
Start vertex (e.g. the start point of a line)
- START_VERTEX - Static variable in class nxopen.uf.UFSket.GeomVertex
-
- startAddress() - Method in interface nxopen.ame.PlcMemoryAreaBuilder
-
Returns the StartAddress
License requirements: None.
- startAdjustment() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the flat pattern compensation adjustment at start of the flange
License requirements: None.
- startAlignFillerSurfaceOption() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Returns the start align filler surface option
License requirements: None.
- STARTAND_END_LOCATIONS - Static variable in class nxopen.formboard.ObjectAttributeReferenceBuilder.LeaderType
-
Two leaders for annotation with start and end location.
- StartAndDirectionData() - Constructor for class nxopen.Section.StartAndDirectionData
-
- StartAndDirectionOfLoopData() - Constructor for class nxopen.Section.StartAndDirectionOfLoopData
-
- startAndEndParametersEqual() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the option to find whether the start and end parameters are equal.
- StartAndEndRcpData() - Constructor for class nxopen.routing.SplinePathBuilder.StartAndEndRcpData
-
- startAngle() - Method in interface nxopen.annotations.ArcComponent
-
Returns the arc start angle in radians.
- startAngle() - Method in interface nxopen.Arc
-
Returns the start angle of the arc.
- startAngle() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the Arc start angle
License requirements: None.
- startAngle() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the start angle
License requirements: None.
- startangle - Variable in class nxopen.cam.SpunOutlineGeom.PlanesAtAnglesData
-
array of start angles for each set
- startAngle() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the start angle of a planar face.
- startangle - Variable in class nxopen.Ellipse.ParametersData
-
In radians
- startAngle() - Method in interface nxopen.Ellipse
-
Returns the start angle.
- startAngle() - Method in interface nxopen.features.AssociativeLineBuilder
-
Returns the start angle
License requirements: None.
- startAngle() - Method in interface nxopen.features.HelixBuilder
-
Returns the start angle
License requirements: None.
- startAngle() - Method in interface nxopen.features.IsoclineCurveBuilder
-
Returns the start angle
License requirements: None.
- startAngle() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the start angle
License requirements: None.
- startAngle() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
Returns the start of angular dimension.
- startAngle() - Method in interface nxopen.mechatronics.ChainJointBuilder
-
Returns the start angle.
- startAngle() - Method in interface nxopen.mechatronics.CylindricalJointBuilder
-
Returns the start angle.
- startAngle() - Method in interface nxopen.mechatronics.HingeJointBuilder
-
Returns the start angle.
- startAngle() - Method in interface nxopen.SketchEllipseBuilder
-
Returns the start angle
License requirements: None.
- startAngle - Variable in class nxopen.uf.UFCurve.Arc
-
- startAngle - Variable in class nxopen.uf.UFCurve.AskIsoclineData
-
- startAngle - Variable in class nxopen.uf.UFCurve.SectionRadialData
-
- startAngle - Variable in class nxopen.uf.UFDrf.ArcInfo
-
- startAngle - Variable in class nxopen.uf.UFModl.DimensionData
-
- startAngle() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the taper angle at the start of the weld
License requirements: ugweld ("UG WELD")
.
- startAngleMethods() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder
-
Returns the angle definition for the start of this region's orientation.
- startAtAngle() - Method in interface nxopen.features.AssociativeLineBuilder
-
Returns the start at angle
License requirements: None.
- startAtArcCenter() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract start at arc center
License requirements: None.
- startAttachment() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the start attachment.
- startAttachmentLimit() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the start attachment limit.
- startBlendScaleFactor() - Method in interface nxopen.geometricutilities.ScalingMethodBuilder
-
Returns the start blend scale factor.
- startBoundary() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
Returns the start boundary, it allows to select curve, sheet body and solid body
License requirements: None.
- startCapLimitPlaneOption() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the start limit plane capping option
License requirements: None.
- startCapPlateStock() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the plate stock builder, which defines the seam material, grade, and thickness
License requirements: None.
- startCapSize() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the start cap size.
- startCapStock() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the list of available material attributes.
- startCapThickness() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the start cap thickness.
- startCapThickness() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the start cap thickness
License requirements: None.
- startCapType() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the start cap type.
- startChamferAngle() - Method in interface nxopen.geometricutilities.MiddleHoleData
-
Returns the start chamfer angle
License requirements: None.
- startChamferAngle() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the start chamfer angle
License requirements: None.
- startChamferEnabled() - Method in interface nxopen.geometricutilities.MiddleHoleData
-
Returns the start chamfer enabled
License requirements: None.
- startChamferEnabled() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the start chamfer enabled
License requirements: None.
- startChamferOffset() - Method in interface nxopen.geometricutilities.MiddleHoleData
-
Returns the start chamfer offset
License requirements: None.
- startChamferOffset() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the start chamfer offset
License requirements: None.
- startCheckBoundary() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the start check boundary builder
License requirements: None.
- startCheckConstantStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the constant stock for start check geometry
License requirements: None.
- startCheckFaceStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the face stock for start check geometry
License requirements: None.
- startCheckRadialStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the radial stock for start check geometry
License requirements: None.
- startClosestToPreviousRetract() - Method in interface nxopen.cam.BladeRough
-
Returns the Start Closest to Previous Retract
License requirements: None.
- startColumn - Variable in class nxopen.uf.UFTabnot.AskMergeInfoData
-
- startConnectivity() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the data representing connectivity information at start
License requirements: None.
- startConnector - Variable in class nxopen.SectionElementData.Data
-
The element that is connected to the
section_element, at the start_point
- startConnector - Variable in class nxopen.SectionElementData.SectionElementData1
-
The element that is connected to the
section_element, at the start_point - this can be curve or point
- startConstraint() - Method in interface nxopen.features.SmoothSplineBuilder
-
Returns the start constraint
License requirements: None.
- startContinuity() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- startContinuity() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the start continuity.
- startContinuity() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the continuity at start of the curve
License requirements: None.
- startContinuityOption() - Method in interface nxopen.features.BridgeCurveBuilder
-
- startControlPoint - Variable in class nxopen.routing.BendReportManager.SegmentInformation
-
- startControlPointPosition - Variable in class nxopen.routing.BendReportManager.SegmentInformation
-
Location of start
ControlPoint
in ABS coordinates, use this instead of the start
ControlPoint
for S-Bends
and bends greater than or equal to 180 degrees.
- startCurve() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the start curve
License requirements: None.
- startCurveDirectionOption() - Method in interface nxopen.features.BridgeCurveBuilder
-
- startCut() - Method in interface nxopen.cam.DmTrimExtend
-
Returns the start cut
License requirements: None.
- StartData() - Constructor for class nxopen.pid.PipeBuilder.StartData
-
- startData - Variable in class nxopen.uf.UFGdt.DatumTargetLine
-
- startDeleteVolume() - Method in interface nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters
-
Returns the volume that is deleted in the first design cycle
License requirements: None.
- startDeltaAngle() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
Returns the start delta angle
License requirements: None.
- startDeltaDistance() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
Returns the start delta distance
License requirements: None.
- startDeltaVector() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
Returns the start delta vector
License requirements: None.
- startDeltaX() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
Returns the start delta X
License requirements: None.
- startDeltaY() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
Returns the start delta Y
License requirements: None.
- startDepthSkew() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- startDepthSkew() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the start depth skew.
- startDiameter() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Start Diameter
License requirements: None.
- startDiameter() - Method in interface nxopen.cam.HoleBossSet
-
Returns the start diameter
License requirements: None.
- startDirection() - Method in interface nxopen.AutomaticTraceline
-
Returns the start direction of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- startDirection() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the start direction.
- startDirectionAngle() - Method in interface nxopen.features.BridgeCurveBuilder
-
- startDirIteration(Tag) - Method in interface nxopen.uf.UFDirpath
-
- startdisplaylimit - Variable in class nxopen.cae.xyplot.AxisModel.DisplayLimitsData
-
- startDist() - Method in interface nxopen.weld.FilletBuilder
-
Returns the on path dimension start distance.
- startDistance() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
Returns the offset start distance (conical)
License requirements: None.
- startDistance() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the start distance
License requirements: None.
- startDistance() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the start point offset distance along the scan
License requirements: None.
- startDistance() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the Start Distance of the Scan Arc
License requirements: None.
- startDistance() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the Start Distance of the Scan Curve
License requirements: None.
- startDistance() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the Start Distance of the Scan Curve
License requirements: None.
- startDistance() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the Start Distance of the Scan Helix
License requirements: None.
- startDistance() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the Start Distance of the Scan Line
License requirements: None.
- startDistance() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the the start distance
License requirements: None.
- startDistance() - Method in interface nxopen.geometricutilities.CurveLengthData
-
Returns the start distance
License requirements: solid_modeling ("SOLIDS MODELING")
.
- startDistance - Variable in class nxopen.uf.UFCurve.SectionParallelData
-
- startDistance() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Returns the start distance.
- startDistance() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the start limit as defined by the distance along the edge
License requirements: ugweld ("UG WELD")
.
- startDistance() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the start dist
License requirements: ugweld ("UG WELD")
.
- startDistanceAnalysis() - Method in interface nxopen.geometricanalysis.DistanceAnalysisBuilder
-
Start distance analysis.
- startDistanceBuilder() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the Start Distance of the Scan Arc
License requirements: None.
- startDistanceBuilder() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the Start Distance of the Scan Curve
License requirements: None.
- startDistanceBuilder() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the Start Distance of the Scan Curve
License requirements: None.
- startDistanceBuilder() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the Start Distance of the Scan Line
License requirements: None.
- startDistanceLocation() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the start dist location
License requirements: ugweld ("UG WELD")
.
- startDrag() - Method in interface nxopen.formboard.FlipComponentBuilder
-
Starts the drag operation of selected object.
- startDrag() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- startDrag() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Begin a drag operation.
- startDrag() - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
Begin a drag operation.
- startDrag() - Method in interface nxopen.routing.ClockPartBuilder
-
Begin a drag operation.
- startDrag() - Method in interface nxopen.routing.TransformPathBuilder
-
Begin a drag operation.
- startEdge - Variable in class nxopen.EdgeChainRule.Data
-
Start edge of edge chain.
- startEdge - Variable in class nxopen.EdgeTangentRule.Data
-
Start edge of edge tangent rule
- startEdge - Variable in class nxopen.EdgeVertexRule.Data
-
Start edge of edge vertex rule
- startEdge - Variable in class nxopen.EdgeVertexTangentRule.Data
-
Start edge of edge tangent rule
- startEdge() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the start edge
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- startEdge() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the start edge
Only use this option to edit gussets created prior to NX10.
- startEdge() - Method in interface nxopen.tooling.PrebendBuilder
-
Returns the start edge of bend face to specify the angle01 to angle05 start from
License requirements: None.
- startEdgeConstraint() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the value indicating type of the start edge constraint
License requirements: None.
- startEditWithRollbackManager(Feature, int) - Method in interface nxopen.features.FeatureCollection
-
- startElement - Variable in class nxopen.Section.StartAndDirectionData
-
The element, curve or edge, specifying
the starting of the section.
- startElevation() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the start elevation of stairway
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- startEndCut() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the start end cut
License requirements: None.
- startEndCut() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the start end cut
License requirements: None.
- startEndCutBlock() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the start end cut block
License requirements: None.
- startEndMode() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the start end mode
License requirements: None.
- startEndMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the scan start end mode
License requirements: None.
- startEndMode() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the start/end mode
License requirements: None.
- startEndMode() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the start/end mode
License requirements: None.
- startEndMode() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the start/end mode
License requirements: None.
- startEndMode() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the start/end mode
License requirements: None.
- startEndMode() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the start/end mode
License requirements: None.
- starteventflag - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
-
the start event status
- starteventpath - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
-
the start event path
- startEventsBuilder() - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
Returns the start events builder
License requirements: None.
- startExtDistSpecValueBuilder() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the builder of Distance, Contour Milling Drive: Start of Cut
License requirements: cam_base ("CAM BASE")
.
- startExtend() - Method in interface nxopen.geometricutilities.Limits
-
Returns the start extend builder
License requirements: None.
- startExtension() - Method in interface nxopen.cam.FollowGeometryMoveBuilder
-
Returns the start extension
License requirements: None.
- startExtension - Variable in class nxopen.routing.HealPath.AllData
-
- startExtensionEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the extend start enabled - this is applicable for start extension to all hole types
License requirements: None.
- startExtensionOption() - Method in interface nxopen.geometricutilities.CurveExtensionBuilder
-
Returns the extension options
License requirements: None.
- startExtensionOption() - Method in interface nxopen.geometricutilities.SplineExtensionBuilder
-
Returns the extension options
License requirements: None.
- startFace - Variable in class nxopen.FaceTangentRule.Data
-
Start face of face tangent rule
- startFace() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the start face.
- startFace - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- startFacetBody() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the start facet body
License requirements: None.
- startFlowDirection() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- startFrame() - Method in interface nxopen.features.shipdesign.GeneralArrangementViewBuilder
-
Returns the start frame
License requirements: None.
- startFrameName() - Method in interface nxopen.features.shipdesign.InsertFramesBuilder
-
Returns the Transverse Frame name
License requirements: None.
- startFrameName() - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilder
-
Returns the start reference transverse frame name.
- startFromCenter() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the start from center
License requirements: None.
- startFromCenter() - Method in interface nxopen.cam.NcmHoleMachiningEngRet
-
Returns the engage/retract start at arc center
License requirements: None.
- startFromSafePlane() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to start from safe plane before first path
License requirements: None.
- startGuide() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- startHighlightCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the start highlight curve.
- startHighlightSection() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- startHoleData() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the start target body
License requirements: None.
- StartHoleData - Interface in nxopen.geometricutilities
-
- StartHoleData.HoleForms - Class in nxopen.geometricutilities
-
This enum represents hole form options in start plate of hole series.
- startImport() - Method in interface nxopen.annotations.ImportSymbolBuilder
-
Starts the Import process
License requirements: nx_layout ("NX Layout")
.
- startIndexInFunction() - Method in interface nxopen.ame.NamingRuleBuilder
-
Returns the start index in function aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- startIndexInLocation() - Method in interface nxopen.ame.NamingRuleBuilder
-
Returns the start index in location aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- startIndexInProduct() - Method in interface nxopen.ame.NamingRuleBuilder
-
Returns the start index in product aspect
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- startInferredConstraint() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the start inferred constraint
License requirements: None.
- startInferredConstraint() - Method in interface nxopen.features.AssociativeLineBuilder
-
Returns the start inferred constraint
License requirements: None.
- startingidentifier - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetPostPlacementRulesData
-
Library node to begin searching from.
- startingUValue() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the start U value of non planar face pattern
License requirements: None.
- startingVValue() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the start V value of non planar face pattern
License requirements: None.
- startInsertingSection(double[]) - Method in interface nxopen.features.StyledSweepBuilder
-
Starts inserting section.
- startIsoAngle() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Returns the start angle for isoclines (uniform)
License requirements: None.
- startIteration - Variable in class nxopen.cae.Post.Animation
-
- startIteration() - Method in interface nxopen.uf.UFClone
-
- startIterIndex() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the start iter index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- startIterValue() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the start iter value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- startLabel() - Method in interface nxopen.cae.MultipleElementCreateBuilder
-
Returns the starting label used to assign element labels, if no explicit labels were defined.
- startLabel() - Method in interface nxopen.cae.MultipleNodeCreateBuilder
-
Returns the starting label used to assign node labels, if no explicit labels were defined.
- startlabels - Variable in class nxopen.cae.LabelRangeSelectionRecipe.LabelRangesData
-
- startLimit() - Method in interface nxopen.features.HelixBuilder
-
Returns the start limit
License requirements: None.
- startLimit() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the start path limit
License requirements: None.
- startLimit() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the start path limit
License requirements: None.
- startLimit() - Method in interface nxopen.geometricutilities.CurveLimitsData
-
Returns the start limit
License requirements: None.
- startLimit() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilder
-
Returns the start position of reduced sheet body
License requirements: None.
- startLimit() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the start limit
License requirements: None.
- startLimit() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the start limit
License requirements: None.
- startLimit - Variable in class nxopen.uf.UFModl.BlendFacesLimitData
-
- startLimitFaceNormalFlag() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the start limiting face normal flag
License requirements: None.
- startLimitFacesetCollector() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the start limit faceset collector
License requirements: None.
- startLimitPlane - Variable in class nxopen.features.FaceBlendBuilder.LimitPlanesData
-
Start limit plane
- startLimitPoint() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the start limit point
License requirements: None.
- startLoadcase - Variable in class nxopen.cae.Post.Animation
-
- startLocalUpdate() - Method in interface nxopen.Update
-
Starts a local update session, and sets an update mark for that session.
- startLocation() - Method in interface nxopen.diagramming.ConnectionBuilder
-
Returns the start location of this connection.
- startLocation() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the start location along the centerline for this segment.
- startLocation() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the start location of control curve
License requirements: None.
- startLocation - Variable in class nxopen.uf.UFGdt.TargetCylArea
-
- startNextRow(NXObject) - Method in interface nxopen.cam.SurfaceDriveGeometry
-
Select next row
License requirements: cam_base ("CAM BASE")
.
- startNode() - Method in interface nxopen.geometricutilities.NonInflectingLawBuilder
-
Returns the start node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- startNode() - Method in interface nxopen.geometricutilities.SShapedLawBuilder
-
Returns the start node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- startNodes - Variable in class nxopen.uf.UFSf.AskElementEdgesData
-
- startNormal() - Method in interface nxopen.features.AssociativeLineBuilder
-
- startNormal - Variable in class nxopen.routing.BendReportManager.SegmentInformation
-
Normal of curve at start points
- startNumAxisSystems() - Method in interface nxopen.cae.connections.ComposerData
-
Returns the start axis number
License requirements: None.
- startNumNodeAndElement() - Method in interface nxopen.cae.connections.ComposerData
-
Returns the start node and element number
License requirements: None.
- startNumProperties() - Method in interface nxopen.cae.connections.ComposerData
-
Returns the start properties number
License requirements: None.
- startObject() - Method in interface nxopen.features.BridgeCurveBuilder
-
- startObject() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the start object
License requirements: None.
- startObject() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
- startObject() - Method in interface nxopen.routing.PathStockBuilder
-
- startObjectType() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the start object type
License requirements: None.
- startOfEngageMotionType() - Method in interface nxopen.cam.TurnAvoidanceStartOfEngageBuilder
-
Returns the start of engage motion type
License requirements: None.
- startOfFinishPass() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the start of finish pass
License requirements: cam_base ("CAM BASE")
.
- startOffset - Variable in class nxopen.annotations.OrdinateDimension.DoglegPreferences
-
- startOffset() - Method in interface nxopen.AutomaticTraceline
-
Returns the start offset of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- startOffset() - Method in interface nxopen.cae.WeldBuilder
-
Returns the distance of the first point from the beginning of the edge(s)
License requirements: None.
- startOffset() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Start Offset
License requirements: None.
- startOffset() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the Start Offset
License requirements: None.
- startOffset() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
Returns the start offset (replaces the legacy offset distance property, and is used for both excess material and fitup)
License requirements: None.
- startOffset() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
- startOffset() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the offset used to determine where the support starts (used with "SpecifyLine" and "SpecifyCsys" creation methods)
License requirements: None.
- startOffset() - Method in interface nxopen.geometricutilities.FeatureOffset
-
Returns the Start Offset
License requirements: None.
- startOffset() - Method in interface nxopen.mechatronics.ObjectSourceBuilder
-
Returns the start offset.
- startOffset() - Method in interface nxopen.routing.OverstockBuilder
-
- startOffsetLock() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the start offset lock state.
- startOfPath() - Method in interface nxopen.cam.BoundaryTurnMemberEvents
-
Returns the start of part events
License requirements: cam_base ("CAM BASE")
.
- startOfPath() - Method in interface nxopen.cam.OperationBuilder
-
Returns the start event builder
License requirements: None.
- startOfPath() - Method in interface nxopen.routing.OverstockApplication
-
Returns the start control point of the path over which the overstock is applied.
- startOfPathBuilder() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the start event builder
License requirements: cam_base ("CAM BASE")
.
- startOfSimulation(UFVariant) - Method in interface nxopen.uf.UFSim
-
- startOfTestCut() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the start of test cut
License requirements: cam_base ("CAM BASE")
.
- startOnThisMember() - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
Start on this member
License requirements: cam_base ("CAM BASE")
.
- startOrientation() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the start orientation of the steelinsert
License requirements: ug_die_design ("Die Design")
.
- startParam - Variable in class nxopen.uf.UFCurve.Conic
-
- startParam - Variable in class nxopen.uf.UFCurve.Spline
-
- startParameter() - Method in interface nxopen.features.vehicledesign.CloseRangeBlindVolumeListItemBuilder
-
Returns the start parameter value on the path curve of the blind volume area.
- startParameter - Variable in class nxopen.uf.UFView.VdeData
-
- startParameter - Variable in class nxopen.uf.UFView.VdeDataAndType
-
- startParms - Variable in class nxopen.routing.HealPath.AllData
-
- startPath() - Method in interface nxopen.weld.WeldBeadPathBuilder
-
Returns the location at which to start the sweep of the bead shape.
- startPct - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
-
- startPercent() - Method in interface nxopen.cam.BladeCutLevels
-
Returns the start %
License requirements: None.
- startPercent - Variable in class nxopen.routing.SegmentManager.SubdivideOption
-
Start Percentage; 0 <= Start percent < End percent
- startPercentage() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the start percentage
License requirements: None.
- startPercentage() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the start percentage along the scan
License requirements: None.
- startPercentage() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the Start Percentage of the Scan Arc
License requirements: None.
- startPercentage() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the Start Percentage of the Scan Curve
License requirements: None.
- startPercentage() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the Start Percentage of the Scan Curve
License requirements: None.
- startPercentage() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the Start Percentage of the Scan Helix
License requirements: None.
- startPercentage() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the Start Percentage of the Scan Line
License requirements: None.
- startPercentage() - Method in interface nxopen.features.PointSetBuilder
-
Returns the percentage of the curve at which to start creating points.
- startPercentage() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the start percentage.
- startPercentageSection() - Method in interface nxopen.features.PointSetBuilder
-
- startPerpendicularFace() - Method in interface nxopen.features.BridgeCurveBuilder
-
- startPlane() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the start plane of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- startPlane() - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
Returns the start plane
License requirements: None.
- startPlane() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
- startPlane() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the start plane
License requirements: None.
- startPlane() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the start plane (only used with "TwoPlanesandLines" creation method)
License requirements: None.
- startPlaneSelected() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the start plane selected.
- startPoint() - Method in interface nxopen.annotations.LineComponent
-
Returns the line start point in absolute coordinates.
- startPoint() - Method in interface nxopen.annotations.RegionBuilder
-
- startPoint() - Method in interface nxopen.AutomaticTraceline
-
Returns the start point of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- startPoint() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the start point
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- startPoint() - Method in interface nxopen.cae.responsesimulation.ResponseResultsEvaluationSettingBuilder
-
Returns the start value of domain setting.
- startPoint() - Method in interface nxopen.cam.BladeFinish
-
Returns the Start Point
License requirements: None.
- startPoint() - Method in interface nxopen.cam.BlendFinish
-
Returns the Start Point
License requirements: None.
- startPoint() - Method in interface nxopen.cam.FollowGeometryMoveBuilder
-
Returns the start location
License requirements: None.
- startPoint() - Method in interface nxopen.cam.SplitSubopCommand
-
Returns the start point value
License requirements: None.
- startPoint() - Method in interface nxopen.cam.TabPointDataBuilder
-
Returns the tab start point
License requirements: cam_base ("CAM BASE")
.
- startPoint() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the start point
License requirements: None.
- startPoint() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
Returns the start point
License requirements: None.
- startPoint() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the point location defining the start of the centerline.
- startPoint() - Method in interface nxopen.features.AssociativeArcBuilder
-
- startPoint() - Method in interface nxopen.features.AssociativeLineBuilder
-
- startPoint() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the start point.
- startPoint() - Method in interface nxopen.features.GeodesicLineBuilder
-
Returns the start point of line
License requirements: None.
- startpoint - Variable in class nxopen.features.OffsetCurveBuilder.ComputeOffsetDirectionData
-
start point of direction
- startPoint() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the start point.
- startPoint() - Method in interface nxopen.features.SpineCurveBuilder
-
Returns the start point
License requirements: None.
- startPoint() - Method in interface nxopen.geometricutilities.CurveExtensionBuilder
-
Returns the point up to which start is extended
License requirements: None.
- startPoint() - Method in interface nxopen.geometricutilities.ModlMotion
-
- startPoint() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
Returns the start point
License requirements: None.
- startPoint() - Method in interface nxopen.geometricutilities.SplineExtensionBuilder
-
Returns the point up to which start is extended
License requirements: None.
- startPoint() - Method in interface nxopen.Line
-
Returns the start point of the line
License requirements: None.
- startPoint - Variable in class nxopen.routing.EditLineSegmentBuilder.OrientationData
-
The start
of the line.
- startPoint - Variable in class nxopen.routing.HealPath.AllData
-
- startPoint - Variable in class nxopen.routing.ISegment.EndPointsData
-
Location of end 0 in ABS coordinates
- startPoint() - Method in interface nxopen.routing.OverstockBuilder
-
- startPoint - Variable in class nxopen.Section.StartAndDirectionData
-
The origin of the vector that defines the direction of
the section.
- startpoint - Variable in class nxopen.Section.StartAndDirectionOfLoopData
-
The origin of the vector that defines the direction of
the loop of the section specified by the index.
- startPoint - Variable in class nxopen.SectionElementData.Data
-
Start point
- startPoint - Variable in class nxopen.SectionElementData.SectionElementData1
-
Start point
- startPoint() - Method in interface nxopen.SketchConicBuilder
-
Returns the start point
License requirements: None.
- startPoint() - Method in interface nxopen.tooling.CoolingConnectBuilder
-
Returns the point for changing the start position of the connecting channel.
- startPoint() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Returns the point as the start position of the channel.
- startPoint - Variable in class nxopen.uf.UFCurve.Line
-
- startPoint - Variable in class nxopen.uf.UFDrf.GetSymbolDividerData
-
- startPoint - Variable in class nxopen.uf.UFGdt.DatumTargetLine
-
- startPoint - Variable in class nxopen.uf.UFGdt.TargetCylArea
-
- startPointCoordinates() - Method in interface nxopen.annotations.ILineTarget
-
Returns the target start point coordinates
License requirements: None.
- startPointDirection() - Method in interface nxopen.features.BridgeCurveBuilder
-
- startPointMethods() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilder
-
Returns the boundary definition at the start of this region.
- startPointMode() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start point mode
License requirements: None.
- startPointMode() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
Returns the start point mode
License requirements: None.
- startPointMotionType() - Method in interface nxopen.cam.TurnAvoidanceStartBuilder
-
Returns the start point motion type
License requirements: None.
- startPointOfOverstock() - Method in interface nxopen.routing.OverstockApplication
-
Returns the start point of overstock on the path.
- startPointOptions() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the start point options
License requirements: None.
- startPointOptions() - Method in interface nxopen.features.AssociativeLineBuilder
-
Returns the start point options
License requirements: None.
- startPointPoint() - Method in interface nxopen.linedesigner.CreateFenceBuilder
-
Returns the start point of fence
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- startPointReference() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the start point reference
License requirements: None.
- startPointReference() - Method in interface nxopen.features.AssociativeLineBuilder
-
Returns the start point reference
License requirements: None.
- startPointsEffectDistBuilder() - Method in interface nxopen.cam.NcmSubopBuilder
-
Returns the region start points effective distance builder (inheritable tool dep)
License requirements: None.
- startPointsUseEffectDist() - Method in interface nxopen.cam.NcmSubopBuilder
-
Returns the start points use effective distance
License requirements: None.
- startPort - Variable in class nxopen.routing.Stock.PortsData
-
Port at the start of the first segment.
- startPosition() - Method in interface nxopen.cae.responsesimulation.VelocityImpactParameters
-
Returns the start position
License requirements: None.
- startPosition() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the start position
License requirements: None.
- startPosition() - Method in interface nxopen.geometricanalysis.sectionanalysis.RadialBuilder
-
Returns the start position
License requirements: None.
- startPosition() - Method in interface nxopen.mechatronics.VirtualAxisBuilder
-
Returns the initial position of virtual axis
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- startPosition() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the start position
License requirements: None.
- startPositionMethod() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the start position method
License requirements: None.
- startPositionOnGuide() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the offset from the start of the guide curve (or start trim object) where cut placement will begin
License requirements: None.
- startPositionPoint() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the start position point
License requirements: None.
- startProfileOriginCurve() - Method in interface nxopen.routing.StockTransitionBuilder
-
Returns the origin curve of start profile
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- startProfileOriginCurveDirection() - Method in interface nxopen.routing.StockTransitionBuilder
-
Returns the direction of origin curve of start profile
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- startPt - Variable in class nxopen.uf.UFCurve.Genconic
-
- startPt - Variable in class nxopen.uf.UFSf.EdgeAskEndPointsData
-
- startRadius() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
- startRadius1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the start radius for side 1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- startRadius2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the start radius for side 2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- startRadiusAnalysis() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
Start radius analysis.
- startRayTracedDisplay() - Method in interface nxopen.display.RayTracedStudioBuilder
-
Start the Ray Traced Studio display after it has been stopped using the Stop action.
- startRcp - Variable in class nxopen.routing.ISegment.EndRcpsData
-
RCP defining start of segment
- startRcp - Variable in class nxopen.routing.SBendCorner.SBendData
-
S-Bend start Control point
- startrcp - Variable in class nxopen.routing.SplinePathBuilder.StartAndEndRcpData
-
The source ControlPoint.
- startReferenceCsys() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the start reference coordinate system
License requirements: None.
- startReferenceCsys() - Method in interface nxopen.features.AssociativeLineBuilder
-
Returns the start reference coordinate system
License requirements: None.
- startReferencePoint() - Method in interface nxopen.features.BridgeCurveBuilder
-
- startReflectionAnalysis() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
Start reflection analysis.
- startRegion() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the start region.
- startRegionCurve() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
-
- startRegionPoint() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
-
Returns the start region point.
- startRevolveAngle() - Method in interface nxopen.cae.AxiSymmetricParameters
-
Returns the start revolve angle
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- startRow - Variable in class nxopen.uf.UFTabnot.AskMergeInfoData
-
- startscale - Variable in class nxopen.cae.xyplot.AxisModel.CalculateZoomScaleData
-
- startSection() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the start section
License requirements: None.
- startSection() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Returns the start section of the lofted flange.
- startSectionFile() - Method in interface nxopen.IgesCreator
-
Returns the start section file - name of the file to provide start section
License requirements: None.
- startSectionPoint() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Returns the start/end point of the start section.It can be start/end point of the section profile.
- startSetbackDis - Variable in class nxopen.uf.UFModl.BlendEdge
-
- startShapeCurve() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- startShapeCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the start shape curve.
- startSize() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the value stored in start size field.
- startSketch() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Returns the start section sketch as slave.
- startSlope() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- startSlopeAnalysis() - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
Start slope analysis.
- startSlopeCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the start slope curve.
- startStation() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the start station.
- startStation() - Method in interface nxopen.tooling.IntermediateStageBuilder
-
Returns the start station.
- startStep() - Method in interface nxopen.cam.DmTrimExtend
-
Returns the start step
License requirements: None.
- startStopBeforeBoundaryOffset() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the start and stop before boundary offset status
License requirements: None.
- startSurface() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- startSurfaceDirectionOption() - Method in interface nxopen.features.BridgeCurveBuilder
-
- StartSymmetricModelingBuilder - Interface in nxopen.features.subdivision
-
- StartSymmetricModelingBuilder.MirrorProcedureOption - Class in nxopen.features.subdivision
-
- startTagmag - Variable in class nxopen.uf.UFModl.StycornerCrvOpt
-
- startTangent() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the start tangent - point can be passed in SELECT_OBJECT which is used in case of multiple solutions
License requirements: None.
- startTangent() - Method in interface nxopen.features.AssociativeLineBuilder
-
Returns the start tangent - point can be passed in SELECT_OBJECT which is used in case of multiple solutions
License requirements: None.
- startTangent - Variable in class nxopen.uf.UFSf.EdgeAskEndPointsData
-
- startTangentDirection() - Method in interface nxopen.geometricutilities.TransitionCurveBuilder
-
Returns the start tangent direction
License requirements: None.
- startTangentMagnitude() - Method in interface nxopen.features.BridgeCurveBuilder
-
- startTangentMagnitude() - Method in interface nxopen.geometricutilities.TangentMagnitudeBuilder
-
Returns the start tangent magnitude
License requirements: None.
- startTangentMagnitude() - Method in interface nxopen.geometricutilities.TransitionCurveBuilder
-
Returns the start tangent magnitude
License requirements: None.
- startTaper() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the taper definition at the start of the bead.
- StartTeeData() - Constructor for class nxopen.pid.PipeBuilder.StartTeeData
-
- StartTeeLocationData() - Constructor for class nxopen.pid.PipeBuilder.StartTeeLocationData
-
- startTime - Variable in class nxopen.assemblies.ClearanceSet.Summary
-
The starting time of the last
analysis run (in seconds since
00:00:00 1/1/1970.
- startTime() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the start time of operation
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- startTime - Variable in class nxopen.uf.UFClear.Summary
-
- startToolAxis() - Method in interface nxopen.cam.FollowGeometryMoveBuilder
-
Returns the start tool axis
License requirements: None.
- startToolAxis - Variable in class nxopen.uf.UFPath.CircularMotion
-
- startToolAxis - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- startTransformation() - Method in interface nxopen.geometricutilities.TransformerData
-
Sets current coordinate system as reference coordinate system for
the transformation.
- startTreatmentType() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the start treatment type: Endcut or Cap
License requirements: None.
- startType() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the miter start type.
- startType1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the start type for side 1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- startType2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the start type for side 2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- startU() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start value in U
License requirements: None.
- startUDeg() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start degrees value in U
License requirements: None.
- startUdeSet() - Method in interface nxopen.cam.NCGroupBuilder
-
Returns the start ude set
License requirements: None.
- startUdeSet() - Method in interface nxopen.cam.OperationBuilder
-
Returns the start ude set
License requirements: None.
- startUDist() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start distance value in U
License requirements: None.
- startUDistance() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
Returns the start distance in the U direction
License requirements: None.
- startUMode() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start U mode
License requirements: None.
- startUPercent() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
Returns the start percent in the U direction
License requirements: None.
- startUSweep() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start sweep value in U
License requirements: None.
- startV() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start value in V
License requirements: None.
- startValue() - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
Returns the start value of frequency range.
- startValue() - Method in interface nxopen.geometricutilities.CurveExtensionBuilder
-
Returns the start value
License requirements: None.
- startValue() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the start value.
- startValue() - Method in interface nxopen.geometricutilities.SplineExtensionBuilder
-
Returns the start value
License requirements: None.
- startValue() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
- startValue() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the start height value of blank.
- startValueForLowerCase() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the start value for lower case alphabet.
- startValueForNumbers() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the start value for numbers.
- startValueForUpperCase() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the start value for upper case alphabet.
- startVDeg() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start degrees value in V
License requirements: None.
- startVDist() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start distance value in V
License requirements: None.
- startVDistance() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
Returns the start distance n the V direction
License requirements: None.
- startVector - Variable in class nxopen.routing.HealPath.AllData
-
- startVector() - Method in interface nxopen.weld.FilletBuilder
-
Returns the start direction reversed or not.
- startVectorI() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the start vector I component
License requirements: None.
- startVectorJ() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the start vector J component
License requirements: None.
- startVectorK() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the start vector K component
License requirements: None.
- startVMode() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start V mode
License requirements: None.
- startVPercent() - Method in interface nxopen.cam.InspectionSurfaceFeatureBuilder
-
Returns the start percent n the V direction
License requirements: None.
- startVSweep() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the start sweep value in V
License requirements: None.
- startWithLower() - Method in interface nxopen.cae.DurSpecialistBlockLoadEventBuilder
-
Returns the start with lower value flag.
- startXTemplateOffset() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the expression defining the value of the start offset of the template for set 1 (X).
- startYTemplateOffset() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the expression defining the value of the start offset of the template for set 2 (Y).
- state() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the state of a design element
License requirements: None.
- state() - Method in interface nxopen.drawings.ViewStyleFPCalloutsBuilder
-
Returns the state toggle on the Callout section of the Flat Pattern tab of the View Style Dialog
License requirements: None.
- state() - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
-
Returns the state toggle on the Curve section of the Flat Pattern tab of the View Style Dialog
License requirements: None.
- State - Class in nxopen.layer
-
Represents the state of the layer
- state - Variable in class nxopen.layer.StateInfo
-
The state of the layer
- STATE - Static variable in class nxopen.mechatronics.ExpressionBlockBuilder.SlotType
-
State that is change during runtime based on internal data
- state() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the index of the state which is currently displayed in graphic window
License requirements: None.
- state() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
Returns the state
License requirements: None.
- State() - Constructor for class nxopen.uf.UFCurve.State
-
- State(int, int, double[]) - Constructor for class nxopen.uf.UFCurve.State
-
- state() - Method in interface nxopen.uistyler.FileOperationData
-
Returns the state
License requirements: None.
- stateCode - Variable in class nxopen.uf.UFCurve.State
-
- StateCollection - Interface in nxopen.layer
-
Represents a copy of the layer states.
- stateIconNameCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.StateIconNameCallback
-
Represents the callback which gets called when the node state is set
by
Node.setState(int)
and the corresponding
state icon of node state is not known.
- stateIndex - Variable in class nxopen.uf.UFModl.StateInfo
-
- stateIndex - Variable in class nxopen.uf.UFSmd.PipNodeData
-
- StateInfo - Class in nxopen.layer
-
Used in several methods that get or set the state of a layer
- StateInfo() - Constructor for class nxopen.layer.StateInfo
-
- StateInfo(int, State) - Constructor for class nxopen.layer.StateInfo
-
Constructor for the StateInfo object.
- StateInfo() - Constructor for class nxopen.uf.UFModl.StateInfo
-
- StateInfo(double, int) - Constructor for class nxopen.uf.UFModl.StateInfo
-
- STATEMENT - Static variable in class nxopen.ame.PlcRule.RefObjectType
-
- STATEMENT - Static variable in class nxopen.PrintBuilder.PaperSize
-
Statement, 5 1/2- by 8 1/2-inches
- states - Variable in class nxopen.features.shipdesign.PenetrationUtils.Verify_penetrationsData
-
- states - Variable in class nxopen.uf.UFCurve.CreateSplineData
-
- states - Variable in class nxopen.uf.UFCurve.FixSplineData
-
- states - Variable in class nxopen.uf.UFCurve.SmoothSplineData
-
- states - Variable in class nxopen.uf.UFCurve.SmoothSplineDataStData
-
- states - Variable in class nxopen.uf.UFModlGeneral.CreateBsurfaceData
-
- states - Variable in class nxopen.uf.UFModlGeneral.FixBsurfaceData
-
- states - Variable in class nxopen.uf.UFModlGeneral.SmoothBsurfaceData
-
- STATIC - Static variable in class nxopen.assemblies.DegreesOfFreedomStatus
-
The point or direction is well defined.
- STATIC - Static variable in class nxopen.cae.BaseIteration.IterationType
-
Static Analysis Iteration
- STATIC - Static variable in class nxopen.cae.responsesimulation.RSEvent.Type
-
- STATIC - Static variable in class nxopen.cae.Result.SolutionType
-
Static
- STATIC - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.PlotType
-
Static plot
- STATIC - Static variable in class nxopen.cae.SimLoadSet.Type
-
Static load set.
- STATIC - Static variable in class nxopen.geometricanalysis.GeometricProperties.OutputType
-
Propeties of the selected entities are displayed in the
information window.
- STATIC - Static variable in class nxopen.motion.MotionSolutionBuilder.AnalysisTypes
-
Static analysis
- STATIC_DYNAMIC_SOLVER - Static variable in class nxopen.uf.UFMotion.Solver
-
- STATIC_LOAD - Static variable in class nxopen.cae.responsesimulation.ExcitationBuilder.ExcitationLocationType
-
- STATIC_NORMAL - Static variable in class nxopen.assemblies.DegreesOfFreedomStatus
-
The direction represents a normal to two translational degrees of freedom.
- STATIC_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- STATIC_PROPERTY - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.WheelType
-
- STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.WheelType
-
- STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.WheelSizeType
-
- STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.WheelSizeType
-
- STATIC_RADIUS - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.WheelSizeType
-
- STATIC_VEHICLE_ALIGNMENT - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- STATIC_WIREFRAME - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
-
- STATIC_WIREFRAME - Static variable in class nxopen.View.RenderingStyleType
-
- STATIC_WIREFRAME_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle
-
- staticAnalysis() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the Static Analysis option
License requirements: None.
- staticAntialiasing() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image antialiasing quality
License requirements: None.
- staticCoefficient() - Method in interface nxopen.motion.BodyContactLms
-
Returns the static coefficient
License requirements: None.
- staticCoefficient() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the static coefficient
License requirements: None.
- staticCoefficientExpression() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the static coefficient expression
License requirements: None.
- staticCoefficientExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the coulomb coefficient expression
License requirements: None.
- staticCoefficientExpression() - Method in interface nxopen.motion.CurveContactAdams
-
Returns the static coefficient expression
License requirements: None.
- staticCoefficientExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the static coefficient expression
License requirements: None.
- StaticCurb - Interface in nxopen.features.vehicledesign
-
Represents a static curb feature
To create or edit an instance of this class, use
StaticCurbBuilder
Created in NX8.5.0
- StaticCurbBuilder - Interface in nxopen.features.vehicledesign
-
- StaticCurbBuilder.PositionType - Class in nxopen.features.vehicledesign
-
Represents the static curb positions.
- StaticCurbBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
-
Represents the requirements control types to define the static curb.
- StaticCurbBuilder.VisualizationType - Class in nxopen.features.vehicledesign
-
Represents the visualization types of the output.
- staticEqu() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the static equ
License requirements: mechanisms ("MECHANISMS")
.
- staticEqu() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the static equ
License requirements: mechanisms ("MECHANISMS")
.
- staticErrorToleranceExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the static error tolerance expression
License requirements: None.
- staticFinalGatherQuality() - Method in interface nxopen.display.GlobalIlluminationBuilder
-
Returns the static final gather quality affects Ray Traced Studio static (still) image rendering
License requirements: None.
- staticForceTolerance() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the static force tolerance
License requirements: None.
- staticFriction() - Method in interface nxopen.mechatronics.CollisionMaterialBuilder
-
Returns the static friction.
- staticFriction() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- staticFriction - Variable in class nxopen.uf.UFMotion.ContactParameters
-
- staticFrictionExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the static Friction Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- staticHold() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the static hold.
- staticHold() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the static hold.
- staticHold() - Method in interface nxopen.motion.TirePropertyFtBuilder
-
Returns the static hold.
- staticHold() - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
Returns the static hold.
- staticHold() - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
Returns the static hold.
- staticInitialStepSizeExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the static initial step size expression
License requirements: None.
- staticIntegratorType() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the integrator type
License requirements: None.
- staticIRayPlusStudioTime() - Method in interface nxopen.display.IRayPlusStudioEditorBuilder
-
Returns the Ray Traced Studio static display time-based rendering timer (read only)
License requirements: studio_render ("UG STUDIO RENDER")
.
- staticJacobianType() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the static jacobian type
License requirements: None.
- StaticLoadData() - Constructor for class nxopen.cae.DurSpecialistSuperpositionEventBuilder.StaticLoadData
-
- StaticLoadExcitation - Interface in nxopen.cae.responsesimulation
-
Represents an excitation of static load type
To create or edit an instance of this class, use
StaticLoadExcitationBuilder
Created in NX6.0.0
- StaticLoadExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- staticLoadUpdate() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the static load update method.
- staticMaxIteration() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the static max iteration
License requirements: None.
- staticMaxStepSizeExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the static max step size expression
License requirements: None.
- staticOffset() - Method in interface nxopen.cae.DurabilityTransientEventBuilder
-
Returns the static offset for the event.
- staticQuasiIteration() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the static quasi iteration
License requirements: None.
- staticRadius() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the static radius of wheel.
- staticRadius() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the static radius of the wheel.
- staticRadius() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the static radius.
- staticRadius() - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
Returns the Static Radius.
- staticRayTracedStudioQuality() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image quality
License requirements: None.
- staticRayTracedStudioRenderDepth() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio static image render depth, controls the iterations of ray tracing reflection and refraction calculations
License requirements: None.
- staticSolutionTolerance() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the static solution tolerance
License requirements: None.
- staticStabilityExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the static stability expression
License requirements: None.
- staticStepSize() - Method in interface nxopen.motion.LmsSolverProperty
-
Returns the static step size
License requirements: None.
- staticVerticalStiffness() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the static vertical stiffness.
- staticVerticalStiffness() - Method in interface nxopen.motion.TirePropertyFtBuilder
-
Returns the static vertical stiffness.
- staticVerticalStiffness() - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
Returns the static vertical stiffness.
- STATION - Static variable in class nxopen.linedesigner.CreateFactoryElementBuilder.TypeAPI
-
Represents the Station type
- STATION - Static variable in class nxopen.linedesigner.DBFactoryNode.NodeType
-
- STATION_ID - Static variable in class nxopen.tooldesigner.SelectDatumsBuilder.SearchOption
-
- STATION_NAME - Static variable in class nxopen.tooldesigner.SelectDatumsBuilder.SearchOption
-
- STATIONARY - Static variable in class nxopen.cae.AutomaticMorphBuilder.OrphanNodeMovementType
-
Stationary in topologically modified region.
- STATIONARY - Static variable in class nxopen.cae.ManualMorphBuilder.MapType
-
stationary mapping
- STATIONARY - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
-
The process action for binder is stationary.
- STATIONARY - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
-
The process action for die is stationary.
- STATIONARY - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
-
The process action for punch is stationary.
- STATIONARY_AND_PARTING_FACE - Static variable in class nxopen.features.DraftBuilder.DraftReferencesMethods
-
Draft from stationary face to parting face.
- STATIONARY_FACE - Static variable in class nxopen.features.DraftBuilder.DraftReferencesMethods
-
Draft from stationary face.
- stationaryAntialiasing() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio stationary antialiasing quality when dynamic interaction stops
License requirements: None.
- stationaryEdgesAboveParting() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the stationary edges above parting
License requirements: None.
- stationaryEdgesBelowParting() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the stationary edges below parting
License requirements: None.
- stationaryEntity() - Method in interface nxopen.features.DraftBuilder
-
- stationaryEntity() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the stationary entity, can be an edge or a face.
- stationaryFace() - Method in interface nxopen.features.CoaxialBuilder
-
Returns the stationary face
License requirements: None.
- stationaryFace() - Method in interface nxopen.features.CoplanarBuilder
-
Returns the stationary face
License requirements: None.
- stationaryFace() - Method in interface nxopen.features.MakeOffsetBuilder
-
Returns the stationary face
License requirements: None.
- stationaryFace() - Method in interface nxopen.features.ParallelBuilder
-
Returns the stationary face.
- stationaryFace() - Method in interface nxopen.features.PerpendicularBuilder
-
Returns the stationary face
License requirements: None.
- stationaryFace() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the stationary face selection
License requirements: None.
- stationaryFace() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
Returns
the parent stationary face.
- stationaryFace() - Method in interface nxopen.features.SymmetricBuilder
-
Returns the stationary face.
- stationaryFace() - Method in interface nxopen.features.TangentBuilder
-
Returns the stationary face
License requirements: None.
- stationaryFace() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the face used to create a blank.
- stationaryFace() - Method in interface nxopen.tooling.InitProjBuilder
-
Returns the planar faces assigned as stationary face of strip
License requirements: None.
- stationaryFinalGatherQuality() - Method in interface nxopen.display.GlobalIlluminationBuilder
-
Returns the stationary final gather quality affects Ray Traced Studio rendering when dynamic operations stop
License requirements: None.
- stationaryPartingReference() - Method in interface nxopen.features.DraftBuilder
-
Returns the stationary parting reference as SC Collector containing only faces or only one datum plane or only one point
Note that DraftBuilder.StationaryPartingReference and DraftBuilder.PartingReference refer to the same collector.
- stationaryQuality() - Method in interface nxopen.display.RayTracedStudioBuilder
-
Returns the Ray Traced Studio stationary display quality when dynamic interaction stops
License requirements: None.
- stationaryRadius() - Method in interface nxopen.features.sheetmetal.JoggleSideOptionsBuilder
-
Returns the stationary radius
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- stationaryRayTracedStudioQuality() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the Ray Traced Studio stationary display quality when dynamic interaction stops
License requirements: None.
- stationaryRayTracedStudioshowStatusIndicator() - Method in interface nxopen.display.RayTracedStudioEditorBuilder
-
Returns the stationary Ray Traced Studio progess status indicator percent complete display
License requirements: None.
- stationaryReference() - Method in interface nxopen.features.DraftBuilder
-
Returns the stationary reference as SC Collector containing only faces or only one datum plane or only one point
License requirements: None.
- stationDistance() - Method in interface nxopen.tooling.LayoutManagementBuilder
-
Returns the station distance of engineering die
License requirements: None.
- stationEnum() - Method in interface nxopen.tooling.LayoutManagementBuilder
-
Returns the station number definition of engineering die
License requirements: None.
- stationInformation() - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder
-
Returns the station information which will be added into specified strip
License requirements: None.
- stationLocation() - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
Returns the conveyor station location
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- stationName() - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
Returns the station name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- stationNameStr() - Method in interface nxopen.tooling.LayoutManagementBuilder
-
Returns the station name definition of engineering die
License requirements: None.
- stationNumber() - Method in interface nxopen.tooling.LayoutManagementBuilder
-
Returns the total station number of engineering die layout
License requirements: None.
- stationNumber() - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder
-
Returns the station number to define information
License requirements: None.
- stationsNo() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the stations no.
- stationType() - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
Returns the conveyor station type
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- STATISTICAL - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- statisticalTolerance() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the statistical tolerance toggle
License requirements: None.
- statisticalType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the statistical enum
License requirements: None.
- statistics - Variable in class nxopen.uf.UFModeling.AskMassProps3dData
-
- statSide - Variable in class nxopen.uf.UFModl.SmbendCornerData
-
- statSide - Variable in class nxopen.uf.UFModl.SmbendCylinderData
-
- statSide - Variable in class nxopen.uf.UFModl.SmbendData
-
- stature - Variable in class nxopen.features.HumanBuilder.StatureData
-
Stature value
- StatureData() - Constructor for class nxopen.features.HumanBuilder.StatureData
-
- statureOption() - Method in interface nxopen.HumanData
-
Returns the stature type for stature value
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- statureType - Variable in class nxopen.features.HumanBuilder.StatureData
-
Flag for percentile stature in database or actual stature measure
- statureUnit - Variable in class nxopen.features.HumanBuilder.StatureData
-
Unit for stature
- statureValue() - Method in interface nxopen.HumanData
-
Returns the stature value
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- status - Variable in class nxopen.cae.aerostructures.author.ABB.CurvedMetallicPanelCompressiveBucklingCoefficientData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.CurvedMetallicPanelShearBucklingCoefficientData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.EquivalentSectionPropertiesData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.ExtrudedMetallicSubSectionCripplingAllowableData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.FlatMetallicPanelBendingBucklingCoefficientData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.FlatMetallicPanelCompressiveBucklingCoefficientData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.FlatMetallicPanelShearBucklingCoefficientData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.LoadDistributionBoltsConcentricLoadsData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MaterialFsyEstimationData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MetallicPanelCompressivePlasticityCurveBc1Data
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MetallicPanelCompressivePlasticityCurveBc2Data
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MetallicPanelCompressivePlasticityCurveBc3Data
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsAllowableData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsBearingData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsBoltBendingData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsBoltCombinedShearTensionBendingData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsBoltCombinedShearTensionData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsBoltShearData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsMaterialStressAllowableData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsNetSectionData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedCompressiveData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedLongitudinalShearCombinedData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedShearData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatBendingData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatCompressiveData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalBendingCombinedData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalShearCombinedData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatShearBendingCombinedData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatShearData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsShearTearOutData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsTrescaPlaneStressData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.MsTsaiHillPlaneStressData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.SecantModulusData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.StressF07Data
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.StressFromStrainInPlasticDomainData
-
- status - Variable in class nxopen.cae.aerostructures.author.ABB.TangentModulusData
-
- status() - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
Returns the execution status
License requirements: nx_masterfem ("Finite Element Modeling")
.
- status() - Method in interface nxopen.cae.connections.Element
-
Returns the status of the element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- status - Variable in class nxopen.cae.ModeSet.ModeByIndexData
-
the status of the mode
- status - Variable in class nxopen.cae.optimization.TBSOptimizationSolution.JA_CAE_OPT_SOL_get_result
-
- status() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset
-
Returns the fine finish offset status
License requirements: None.
- status() - Method in interface nxopen.cam.CAMFeature
-
Returns the update status of the CAMFeature
License requirements: None.
- status() - Method in interface nxopen.cam.DimensionRule
-
Returns the dimension rule status
License requirements: None.
- status() - Method in interface nxopen.cam.ExtendAtEdges
-
Returns the extend at edges toggle
License requirements: None.
- status() - Method in interface nxopen.cam.FeatureGeometryGroup
-
Returns the update status of the feature group
License requirements: None.
- status() - Method in interface nxopen.cam.InPathEventDataBuilder
-
Returns the in path event output status
License requirements: cam_base ("CAM BASE")
.
- status() - Method in interface nxopen.cam.MinCutDepth
-
Returns the Minimum Cut Depth status
License requirements: None.
- status() - Method in interface nxopen.cam.MinCutLength
-
Returns the status of Minimum Cut Length
License requirements: None.
- status() - Method in interface nxopen.features.SketchConversionStatus
-
Returns the status of conversion of a feature to an independent sketch.
- status() - Method in interface nxopen.features.vehicledesign.CloseRangeBlindVolumeListItemBuilder
-
Returns the indication if the measured length of blind volume area is acceptable or not.
- status - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurvePropertiesData
-
Return status
- status - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFacePropertiesData
-
Return status
- status - Variable in class nxopen.geometricanalysis.GeometricProperties.EdgePropertiesData
-
Return status
- status - Variable in class nxopen.geometricanalysis.GeometricProperties.FacePropertiesData
-
Return status
- status() - Method in interface nxopen.issue.IssueContent
-
Returns the issue status
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- status() - Method in interface nxopen.issue.IssueContentBuilder
-
Returns the issue status
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- status - Variable in class nxopen.mechatronics.SHMSignalClientBuilder.SHMInfo
-
Status
- status - Variable in class nxopen.Part.FeatureUpdateStatus
-
status of the feature (e.g.
- status - Variable in class nxopen.PartCollection.SetDisplayData
-
Returns OK if the work part could be set as requested, or a status code
indicating the reason why this was not possible.
- status() - Method in interface nxopen.routing.StockDataRefreshBuilder
-
Returns
License requirements: routing_base ("Routing Basic")
.
- status - Variable in class nxopen.RuleManager.InitializeData
-
Status from initializing RuleManager
- status - Variable in class nxopen.Sketch.StatusData
-
The sketch's status, which indicates how well constrained the sketch is
- status - Variable in class nxopen.uf.UFAssem.AskCompExplosionData
-
- status - Variable in class nxopen.uf.UFCurve.CreateJoinedCurveData
-
- status - Variable in class nxopen.uf.UFCurve.CreateJoinedFeatureData
-
- status - Variable in class nxopen.uf.UFModeling.AskMaxCurvatureData
-
- status - Variable in class nxopen.uf.UFModl.BlendPointData
-
- status - Variable in class nxopen.uf.UFModl.EdgeBlendSet
-
- status - Variable in class nxopen.uf.UFModl.EdgeBlendSetbackData
-
- status - Variable in class nxopen.uf.UFModl.EdgeBlendStopshortData
-
- Status() - Constructor for class nxopen.uf.UFOper.Status
-
- Status(int, int, int, int) - Constructor for class nxopen.uf.UFOper.Status
-
- status - Variable in class nxopen.uf.UFSket.AskDimStatusData
-
- status - Variable in class nxopen.uf.UFTrns.CreateCsysMappingMatrixData
-
- status - Variable in class nxopen.uf.UFTrns.CreateReflectionMatrixData
-
- status - Variable in class nxopen.uf.UFTrns.CreateRotationMatrixData
-
- status - Variable in class nxopen.uf.UFTrns.CreateScalingMatrixData
-
- status - Variable in class nxopen.uf.UFTrns.TransformObjectsData
-
- status - Variable in class nxopen.uf.UFUgmgr.ValidateAlternatePartIdData
-
- status - Variable in class nxopen.uf.UFUgmgr.ValidatePartRevData
-
- status - Variable in class nxopen.uf.UFView.AskZClipData
-
- status - Variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkDefinition
-
status of the linked object
- status - Variable in class nxopen.userdefinedobjects.UserDefinedObjectManager.LinkedUdoDefinition
-
- status() - Method in interface nxopen.validate.ResultObject
-
Returns the error status of check result
License requirements: None.
- Status1() - Constructor for class nxopen.uf.UFOper.Status1
-
- Status1(int, int, int) - Constructor for class nxopen.uf.UFOper.Status1
-
- STATUS_DAMAGE - Static variable in class nxopen.cae.Result.Quantity
-
- statusControl() - Method in interface nxopen.cam.WedmStatusControlCiBuilder
-
Returns the Wedm Status Control Type
License requirements: None.
- StatusData() - Constructor for class nxopen.Sketch.StatusData
-
- statuses - Variable in class nxopen.uf.UFAssem.UpgradeStatus
-
- statuses - Variable in class nxopen.uf.UFClone.NamingFailures
-
- statuses - Variable in class nxopen.uf.UFPart.LoadStatus
-
- StatusInfo() - Constructor for class nxopen.cae.IMeshManager.StatusInfo
-
- StatusInfo(int, int, int) - Constructor for class nxopen.cae.IMeshManager.StatusInfo
-
Constructor for the StatusInfo object.
- StatusInfo() - Constructor for class nxopen.uf.UFLayer.StatusInfo
-
- StatusInfo(int, int) - Constructor for class nxopen.uf.UFLayer.StatusInfo
-
- statusOfPlatformCeilingHeightUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the platform ceiling height updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- statusOfPlatformElevationUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the platform elevation updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- statusOfPlatformHeightUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the platform height updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- statusOfPlatformSupportDefaultFromCeilingToggleUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the platform supportDefaultFromCeilingToggle updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- statusOfPlatformSupportOptionUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the platform supportOption updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- statusOfPlatformThicknessUpdation() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the platform thickness updation status
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- STBD_FR_OUT_CTR - Static variable in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
-
Direction is Starboard, From Reference, Outside or Centered.
- STD - Static variable in class nxopen.cam.GrooveToolBuilder.InsertShapes
-
Standard groove tool
- std() - Method in interface nxopen.UFSession
-
- STD_LASER - Static variable in class nxopen.cam.Tool.Subtypes
-
Standard Laser tool
- stdAddUserSets() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Adds standard part into user defined set
License requirements: solid_modeling ("SOLIDS MODELING")
.
- stdLoadFile() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Loads standard attribute list
License requirements: solid_modeling ("SOLIDS MODELING")
.
- STEADY_STATE - Static variable in class nxopen.motion.TirePropertyTnoBuilder.DynamicsType
-
- STEEL - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.MaterialTypeName
-
Steel
- STEEL - Static variable in class nxopen.tooling.DirectUnfoldBuilder.MatType
-
Default is steel.
- STEEL_FEATURE - Static variable in class nxopen.features.shipdesign.ProfileCutoutBuilder.CollarPlateCreationApproaches
-
Steel feature approach - User Collar Plate to create collar plate
- steelBodies() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the steel bodies
License requirements: None.
- SteelCollarPlate - Interface in nxopen.features.shipdesign
-
Represents a collar plate steel feature
To create or edit an instance of this class, use
SteelCollarPlateBuilder
Created in NX7.5.0
- SteelCollarPlateBuilder - Interface in nxopen.features.shipdesign
-
- steelComponents() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the design elements to prepare for manufacturing.
- SteelDistribution - Interface in nxopen.features.shipdesign
-
Represents a steel distribution feature
To create or edit an instance of this class, use
SteelDistributionBuilder
Created in NX5.0.0
- SteelDistributionBuilder - Interface in nxopen.features.shipdesign
-
- SteelDistributionBuilder.SaForm - Class in nxopen.features.shipdesign
-
Sa Form
- SteelDistributionBuilder.SaMaterial - Class in nxopen.features.shipdesign
-
Sa Material
- SteelDistributionBuilder.SaName - Class in nxopen.features.shipdesign
-
Sa Name
- SteelDistributionBuilder.SaSize - Class in nxopen.features.shipdesign
-
Sa Size
- SteelDistributionBuilder.SaType - Class in nxopen.features.shipdesign
-
Sa Type
- steelFaces() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
Returns the collection of faces to be insulated.
- SteelFeatureSpreadsheetBuilder - Interface in nxopen.features.shipdesign
-
- steelFeatureType() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
Returns
the steel feature type (eg: Profile, Edge Reinforcement, etc)
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_basic ("Ship Basic Design")
.
- steelinsert(Feature) - Method in interface nxopen.die.DieCollection
-
Creates/Edits the steel insert feature builder.
- SteelInsertBuilder - Interface in nxopen.die
-
Represents a Steel Insert feature builder.
- SteelInsertBuilder.HoleGridOrientationData - Class in nxopen.die
-
- SteelInsertBuilder.InsertTypeOption - Class in nxopen.die
-
Settings for the insert type.
- SteelInsertBuilder.MainProfileData - Class in nxopen.die
-
- SteelInsertSectionBuilder - Interface in nxopen.die
-
Represents a Steel Insert Section sub feature.
- SteelInsertSectionBuilder.ExtensionTypeOption - Class in nxopen.die
-
Settings for the extension type.
- SteelInsertSectionBuilder.FormingAttributesData - Class in nxopen.die
-
- SteelInsertSegmentChildBuilder - Interface in nxopen.die
-
Represents a Steel Insert Segment Child sub feature.
- SteelInsertSegmentChildBuilder.ExtensionTypeOption - Class in nxopen.die
-
Settings for the extension type.
- SteelInsertSegmentChildBuilder.InsertTypeOption - Class in nxopen.die
-
Settings for the insert type.
- SteelInsertSegmentParentBuilder - Interface in nxopen.die
-
Represents a Steel Insert Segment Parent sub feature.
- SteelInsertSegmentParentBuilder.ExtensionTypeOption - Class in nxopen.die
-
Settings for the extension type.
- SteelInsertSegmentParentBuilder.InsertTypeOption - Class in nxopen.die
-
Settings for the insert type.
- SteelInsulation - Interface in nxopen.features.shipdesign
-
Represents a steel insulation feature.
- SteelInsulationBoundaryBuilder - Interface in nxopen.features.shipdesign
-
Represents a Steel Insulation Boundary builder.
- SteelInsulationBoundaryBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- SteelInsulationBuilder - Interface in nxopen.features.shipdesign
-
Represents a builder that is used to create or edit a
SteelInsulation
feature.
- SteelSupport - Interface in nxopen.features.shipdesign
-
Represents a steel support feature
To create or edit an instance of this class, use
SteelSupportBuilder
Created in NX7.5.0
- SteelSupportBuilder - Interface in nxopen.features.shipdesign
-
- SteelSupportBuilder.CapOptions - Class in nxopen.features.shipdesign
-
Does this feature have end caps, and if so what kind?
- SteelSupportBuilder.CreationMethod - Class in nxopen.features.shipdesign
-
Method used to create the support feature
- SteelVentHoles - Interface in nxopen.features.shipdesign
-
Represents a ship vent holes feature
To create or edit an instance of this class, use
SteelVentHolesBuilder
Created in NX7.5.0
- SteelVentHolesBuilder - Interface in nxopen.features.shipdesign
-
- STEEP - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
-
Steep
- STEEP - Static variable in class nxopen.cam.EditSubopCommand.ContainmentTypes
-
Steep
- STEEP - Static variable in class nxopen.cam.SurfaceRegions.CreateRegionsTypes
-
steep
- STEEP - Static variable in class nxopen.cam.SurfaceRegions.FeatureTypes
-
type to steep
- STEEP - Static variable in class nxopen.uf.UFSurfReg.Type
-
- STEEP_AND_NON_STEEP - Static variable in class nxopen.cam.SurfaceRegions.CreateRegionsTypes
-
steep and non-steep
- STEEP_AND_NONSTEEP - Static variable in class nxopen.cam.DmAmBuilder.SteepOptTypes
-
- STEEP_AREA - Static variable in class nxopen.cam.SurfaceContourBuilder.CleanupTypes
-
- STEEP_CONTAIN_NONE - Static variable in class nxopen.cam.DmAmBuilder.SteepOptTypes
-
- STEEP_DIRECTIONAL - Static variable in class nxopen.cam.DmAmBuilder.SteepOptTypes
-
- STEEP_FIRST - Static variable in class nxopen.cam.Sequence.Types
-
STEEP First
- STEEP_FLANKED_BEVEL - Static variable in class nxopen.annotations.Symbol
-
Specifies steeep flanked bevel butt weld symbol ( ISO and DIN only)
- STEEP_FLANKED_BEVEL_BUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- STEEP_FLANKED_V - Static variable in class nxopen.annotations.Symbol
-
Specifies steep flanked V butt weld symbol (ISO and DIN only)
- STEEP_FLANKED_VBUTT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- STEEP_LAST - Static variable in class nxopen.cam.Sequence.Types
-
STEEP Last
- STEEP_ONLY - Static variable in class nxopen.cam.RoughTurningBuilder.CleanupTypes
-
Cleanup mode: Steep only
- STEEP_ONLY - Static variable in class nxopen.cam.SteepContainment.Types
-
Steep Only
- steepAngle() - Method in interface nxopen.cam.CleanupSettings
-
Returns the builder of Steep Angle, Cleanup Geometry Settings
License requirements: None.
- steepAngle() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the steep angle
License requirements: None.
- steepAngleBuilder() - Method in interface nxopen.cam.FlowBuilder
-
Returns the Steep Angle
License requirements: None.
- steepAreas() - Method in interface nxopen.cam.CleanupSettings
-
Returns the Steep Areas, Cleanup Geometry Settings
License requirements: cam_base ("CAM BASE")
.
- steepBody() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the steep body
License requirements: None.
- steepContainment() - Method in interface nxopen.cam.MillCutParameters
-
Returns the steep containment
License requirements: None.
- SteepContainment - Interface in nxopen.cam
-
- SteepContainment.Types - Class in nxopen.cam
-
Available types for steep containment
- steepCutDirection() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the Steep Cut Direct
License requirements: None.
- steepCutting() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Steep Cutting Builder
License requirements: None.
- steepCutting() - Method in interface nxopen.cam.FlowBuilder
-
Returns the Steep Cutting Builder
License requirements: None.
- STEEPEST_DESCENT - Static variable in class nxopen.cae.ModelUpdateOptimOptionsBuilder.MethodChoice
-
Steepest Descent method
- steepestDescDVarStep() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
Returns the steepest descent design variable step
License requirements: None.
- steepestDescMaxInnerIter() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
Returns the steepest descent max inner iterations
License requirements: None.
- steepestDescMethod() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
Returns the steepest descent method
License requirements: None.
- steepMergeDistance() - Method in interface nxopen.cam.CleanupOutput
-
Returns the builder of Steep Merge, Cleanup Geometry Output
License requirements: None.
- steepOverlapAngle() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Steep Overlap Angle
License requirements: None.
- steepOverlapDistance() - Method in interface nxopen.cam.CleanupOutput
-
Returns the builder of Steep Overlap, Cleanup Geometry Output
License requirements: None.
- steepOverlapDistance() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Steep Overlap Distance
License requirements: None.
- steepOverlapOption() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Steep Overlap Option
License requirements: None.
- steepOverlapType() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the Steep Overlap Type
License requirements: None.
- STEER_IAX_SUSPENSION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- steeringWheelCenterPoint() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the center point of the driver steering wheel.
- steeringWheelCenterPointActive() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the status to indicate whether the steering wheel center point is active or not.
- stemTop() - Method in interface nxopen.cam.InspectionProbeTrackingBuilder
-
Returns the stem top
License requirements: None.
- stemTop() - Method in interface nxopen.cam.ProbeTrackingBuilder
-
Returns the stem top
License requirements: None.
- stencilPreview() - Method in interface nxopen.display.DecalBuilder
-
Returns the stencil preview toggle
License requirements: None.
- STEP - Static variable in class nxopen.blockstyler.Wizard.TaskNavigatorItem
-
- step(boolean) - Method in interface nxopen.cam.PathDisplay
-
Animates one (1) frame of the selected operation's tool path display.
- step() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the step to be applied at the end of the tangent extension of the flange
License requirements: ug_die_design ("Die Design")
.
- step() - Method in interface nxopen.die.ThroatParentBuilder
-
Returns the step to be applied at the end of the tangential extension of the flange
License requirements: ug_die_design ("Die Design")
.
- Step - Interface in nxopen.features
-
Represents a step feature
To create or edit an instance of this class, use
StepBuilder
Created in NX10.0.0
- step() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the step
License requirements: None.
- STEP - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.CavityTypeItems
-
the step type
- STEP - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalCavityType
-
the step type
- STEP - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalCavityType
-
the step type
- step(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- Step203Creator - Interface in nxopen
-
- Step203Creator.EntityNameOption - Class in nxopen
-
Deprecated.
Entity Name Option
- Step203Creator.ExportFromOption - Class in nxopen
-
Deprecated.
Create the builder
- Step203Creator.ExternalReferenceStructureOption - Class in nxopen
-
Deprecated.
External Reference Structure As Option
- Step203Importer - Interface in nxopen
-
- Step203Importer.ImportToOption - Class in nxopen
-
Create the builder
- Step214Creator - Interface in nxopen
-
- Step214Creator.EntityNameOption - Class in nxopen
-
Deprecated.
Entitiy Name Option
- Step214Creator.ExportFromOption - Class in nxopen
-
Deprecated.
Export From Option
- Step214Creator.ExternalReferenceStructureOption - Class in nxopen
-
Deprecated.
External Reference Structure As Option
- Step214Importer - Interface in nxopen
-
- Step214Importer.ImportToOption - Class in nxopen
-
Create the builder
- Step242Importer - Interface in nxopen
-
- Step242Importer.ImportToOption - Class in nxopen
-
What part to import to.
- Step242Importer.MessageEnum - Class in nxopen
-
Messages output when opening the file.
- STEP_EXPORT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- STEP_EXPORT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- STEP_FACE - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.DepthMeasurementDatumType
-
- STEP_FROM_END - Static variable in class nxopen.features.ShelfBuilder.LengthMethods
-
- STEP_IN - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepModeType
-
Step In
- STEP_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- STEP_OUT - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepModeType
-
Step Out
- STEP_OVER - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepModeType
-
Step Over
- stepAhead() - Method in interface nxopen.cam.PlungeMillingBuilder
-
Returns the step ahead distance builder (inheritable tool dependent double)
License requirements: None.
- stepAhead() - Method in interface nxopen.cam.TrochoidalSettings
-
Returns the trochoidal path stepover distance
License requirements: None.
- stepAngle() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the step angle
License requirements: None.
- stepAngle - Variable in class nxopen.uf.UFCurve.AskIsoclineData
-
- stepAngle - Variable in class nxopen.uf.UFCurve.SectionRadialData
-
- stepAngleBuilder() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Step Angle
License requirements: None.
- stepArticulation(int) - Method in interface nxopen.uf.UFMotion
-
- stepAskLbcDescValidNx(Tag, Tag) - Method in interface nxopen.uf.UFSfl
-
- stepAskNameNx(Tag) - Method in interface nxopen.uf.UFSf
-
- stepAskPropertyByIndexNx(Tag, int) - Method in interface nxopen.uf.UFSf
-
- stepAskPropertyCountNx(Tag) - Method in interface nxopen.uf.UFSf
-
- stepAskPropertyNx(Tag, String) - Method in interface nxopen.uf.UFSf
-
- stepBackward() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
TODO: fill in a description for this
License requirements: None.
- stepBackward() - Method in interface nxopen.motion.AnimationControl
-
Animation step backward
License requirements: mechanisms ("MECHANISMS")
.
- stepBackward() - Method in interface nxopen.motion.SpreadsheetRunControl
-
SpreadsheetRun step backward
License requirements: mechanisms ("MECHANISMS")
.
- stepBackward() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
Step backward of animation
License requirements: None.
- stepBlendRadiusDim1() - Method in interface nxopen.features.StepBuilder
-
Returns the step blend radius dimension 1
License requirements: None.
- stepBlendRadiusDim2() - Method in interface nxopen.features.StepBuilder
-
Returns the step blend radius dimension 2
License requirements: None.
- StepBuilder - Interface in nxopen.features
-
- StepBuilder.DepthMethods - Class in nxopen.features
-
Represents face operations applied to the motion face
- StepBuilder.ReferenceBoundaryTypes - Class in nxopen.features
-
Represents selected type as reference boundary object
- StepBuilder.StepFaceMethods - Class in nxopen.features
-
Represents face operations applied to the step face
- StepBuilder.StepLocations - Class in nxopen.features
-
Represents the step location
- StepBuilder.StepNewTypes - Class in nxopen.features
-
Represents the step feature new type since NX12
- StepBuilder.StepTypes - Class in nxopen.features
-
Represents the step feature type
- StepBuilder.StepWallMethods - Class in nxopen.features
-
Represents face operation applied to the step wall face
- stepClearance() - Method in interface nxopen.cam.Cycle
-
Returns the step clearance
License requirements: None.
- stepClearanceStatus() - Method in interface nxopen.cam.Cycle
-
Returns the step clearance status
License requirements: None.
- stepCount() - Method in interface nxopen.cae.SimSolution
-
Returns the number of steps
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- stepCount() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the step count value used in the transformation or morphing calculations
License requirements: None.
- StepCreator - Interface in nxopen
-
Represents a
StepCreator
to be used when exporting the STEP Data
This class is created using
DexManager
.
- StepCreator.EntityNameOption - Class in nxopen
-
Entity Name Option
- StepCreator.ExportAsOption - Class in nxopen
-
Export As option
- StepCreator.ExportFromOption - Class in nxopen
-
Create the builder
- StepCreator.ExternalReferenceStructureOption - Class in nxopen
-
External Reference Structure As Option
- stepDepthDim() - Method in interface nxopen.features.StepBuilder
-
Returns the step depth dimension
License requirements: None.
- stepDescriptorAskNameNx(Tag) - Method in interface nxopen.uf.UFSfl
-
- stepDir - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData
-
- stepDir - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData
-
- stepDir - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- stepDir - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData
-
- stepDir - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData
-
- stepDir - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData
-
- stepDisplay(boolean) - Method in interface nxopen.cam.PathDisplay
-
Animate one path event of the selected operation's tool path display.
- stepDistance() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the step distance to add at the end of the tangent extension.
- stepDistance() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the step distance
License requirements: None.
- stepDistance() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the distance between sections used in the analysis
License requirements: None.
- stepDistance - Variable in class nxopen.uf.UFCurve.SectionParallelData
-
- stepExpression() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the expression that defines the step count used in the transformation or morphing calculations
License requirements: None.
- stepFaceMethod1() - Method in interface nxopen.features.StepBuilder
-
Returns the step face method 1
License requirements: None.
- stepFaceMethod2() - Method in interface nxopen.features.StepBuilder
-
Returns the step face method 2
License requirements: None.
- stepFirst() - Method in interface nxopen.motion.AnimationControl
-
Animation step to first step
License requirements: mechanisms ("MECHANISMS")
.
- stepForward() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
TODO: fill in a description for this
License requirements: None.
- stepForward() - Method in interface nxopen.motion.AnimationControl
-
Animation step forward
License requirements: mechanisms ("MECHANISMS")
.
- stepForward() - Method in interface nxopen.motion.SpreadsheetRunControl
-
SpreadsheetRun step forward
License requirements: mechanisms ("MECHANISMS")
.
- stepForward() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
Step animation forward
License requirements: None.
- stepIntol() - Method in interface nxopen.cam.DmStreamlineCutStep
-
Returns the step Intol which defines the inner tolerance
License requirements: None.
- stepIntol() - Method in interface nxopen.cam.DPMItpBuilder
-
- stepIntolBuilder() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the builder of cut step intol
License requirements: None.
- stepIntolBuilder() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the builder of SDM: Cut Step Intol
License requirements: None.
- stepLast() - Method in interface nxopen.motion.AnimationControl
-
Animation step to last step
License requirements: mechanisms ("MECHANISMS")
.
- stepLineStyle() - Method in interface nxopen.cae.xyplot.ProbingStyle
-
Returns the step line display style.
- stepLocation() - Method in interface nxopen.features.StepBuilder
-
Returns the step location
License requirements: nx_aero_design (" NX Aero Design")
.
- StepManager - Interface in nxopen.cae
-
- stepMethod() - Method in interface nxopen.cam.DPMItpBuilder
-
- stepMethod() - Method in interface nxopen.cam.MultiDepthCut
-
Returns the Multi-Depth Cut, Step Method
License requirements: None.
- stepMethod1() - Method in interface nxopen.features.ShelfBuilder
-
Returns the step method1
License requirements: None.
- stepMethod2() - Method in interface nxopen.features.ShelfBuilder
-
Returns the step method2
License requirements: None.
- stepMove(double) - Method in interface nxopen.features.subdivision.CageManipulatorData
-
Moves the objects by step value.
- stepNewType() - Method in interface nxopen.features.StepBuilder
-
Returns the step new type
License requirements: None.
- stepNotifyPostCallback(Wizard, int) - Method in interface nxopen.blockstyler.Wizard.StepNotifyPostCallback
-
The StepNotifyPost callback notifies a client after navigating to the next step
in the Wizard.
- stepNotifyPreCallback(Wizard, int) - Method in interface nxopen.blockstyler.Wizard.StepNotifyPreCallback
-
The StepNotifyPre callback notifies a client before navigating to the next step
in the Wizard.
- stepOption() - Method in interface nxopen.features.AdmMoveFaceBuilder
-
Returns the step option behavior.
- stepOption() - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Returns the offset surface allow step boundaries option.
- stepOption() - Method in interface nxopen.geometricutilities.StepOptionBehavior
-
Returns the step option
License requirements: None.
- StepOptionBehavior - Interface in nxopen.geometricutilities
-
Represents a
StepOptionBehavior
It provides several step options for controlling behavior when
move face and so on.
- StepOptionBehavior.StepOptionType - Class in nxopen.geometricutilities
-
Step Faec options
- stepOutol() - Method in interface nxopen.cam.DmStreamlineCutStep
-
Returns the step Outol which defines the outer tolerance
License requirements: None.
- stepOuttol() - Method in interface nxopen.cam.DPMItpBuilder
-
- stepOuttolBuilder() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the builder of cut step outol
License requirements: None.
- stepOuttolBuilder() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the builder of SDM: Cut Step Outol
License requirements: None.
- stepover() - Method in interface nxopen.cam.AreaMillingContainment
-
Returns the builder of area milling stepover
License requirements: None.
- stepover() - Method in interface nxopen.cam.BladeRough
-
Returns the Stepover builder
License requirements: None.
- stepover() - Method in interface nxopen.cam.BlendFinish
-
Returns the Stepover builder
License requirements: None.
- STEPOVER - Static variable in class nxopen.cam.CamOperationMotionType
-
- STEPOVER - Static variable in class nxopen.cam.CamPathMotionType
-
- STEPOVER - Static variable in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes
-
Zig with Stepover
- STEPOVER - Static variable in class nxopen.cam.DmBndBuilder.BndCutTraversalTypes
-
Zig with Stepover
- stepover() - Method in interface nxopen.cam.DPMTubeBuilder
-
Returns the stepover builder
License requirements: None.
- stepover() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the builder of flow cut stepover
License requirements: None.
- stepover() - Method in interface nxopen.cam.HubFinish
-
Returns the Stepover builder
License requirements: None.
- stepover() - Method in interface nxopen.cam.MillCutParameters
-
Returns the stepover
License requirements: None.
- STEPOVER - Static variable in class nxopen.cam.MoveBuilder.Motion
-
Stepover
- STEPOVER - Static variable in class nxopen.cam.NcmTransferBuilder.LongMotionTypes
-
stepover smooth motion type
- stepover() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color stepover
License requirements: None.
- stepover() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Stepover
License requirements: None.
- stepoverBuilder() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the stepover builder
License requirements: None.
- stepoverBuilder() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the stepover builder
License requirements: None.
- stepoverBuilder() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the builder of stepover
License requirements: None.
- stepoverBuilder() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the stepover builder
License requirements: None.
- stepoverBuilder() - Method in interface nxopen.cam.GuidedCurveBuilder
-
Returns the Stepover
License requirements: None.
- StepoverBuilder - Interface in nxopen.cam
-
Represents a Stepover Builder .
- stepoverBuilder() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Stepover builder
License requirements: None.
- StepoverBuilder.ApplyTypes - Class in nxopen.cam
-
apply on part options .
- StepoverBuilder.StepoverTypes - Class in nxopen.cam
-
stepover options .
- stepoverDis() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the stepover distance
License requirements: cam_base ("CAM BASE")
.
- stepoverDisplayAsNCM() - Method in interface nxopen.cam.Preferences
-
Returns the stepover move display as non cutting move
License requirements: None.
- stepoverDistance - Variable in class nxopen.uf.UFModl.RoughOffset
-
- stepoverLift() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the stepover lift
License requirements: None.
- stepoverLimit() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Stepover Limit
License requirements: None.
- stepoverNum() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the stepover number
License requirements: cam_base ("CAM BASE")
.
- stepoverPercentBuilder() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the Tool Diameter, Stepover for the Radial Cut method.
- STEPOVERS - Static variable in class nxopen.cam.CutBand.Types
-
Stepovers
- stepoverScallopBuilder() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the builder of Scallop Height.
- stepoverScallopHeight() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the stepover scallop height
License requirements: cam_base ("CAM BASE")
.
- stepoverType() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the stepover type
License requirements: cam_base ("CAM BASE")
.
- stepoverType() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the stepover type
License requirements: None.
- stepoverTypeType() - Method in interface nxopen.cam.WedmStepoverBuilder
-
Returns the stepover item type
License requirements: None.
- stepParamsBuilder() - Method in interface nxopen.cam.DrillStepToolBuilder
-
Returns the step params builder
License requirements: cam_base ("CAM BASE")
.
- StepParamsBuilder - Interface in nxopen.cam
-
Represents a StepParams Builder .
- StepParamsBuilder.Data - Class in nxopen.cam
-
- STEPPED - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.ColorPlotTypes
-
Stepped
- STEPPED_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- STEPPED_PRESSURE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.Types
-
Create a saw tooth set of curves on the surface where the tangential for each line is constant on intersecting plane sections.
- STEPPED_SHAFT_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- STEPPED_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType
-
- SteppedSectionLine - Interface in nxopen.drawings
-
A Simple or Stepped Section Line.
- SteppedSectionLineBuilder - Interface in nxopen.drawings
-
- stepPp - Variable in class nxopen.uf.UFSf.AskStepNxData
-
- stepRampDim1() - Method in interface nxopen.features.StepBuilder
-
Returns the step ramp dimension 1
License requirements: None.
- stepRampDim2() - Method in interface nxopen.features.StepBuilder
-
Returns the step ramp dimension 2
License requirements: None.
- stepRetract() - Method in interface nxopen.cam.Cycle
-
Returns the step retract
License requirements: None.
- steps - Variable in class nxopen.uf.UFAssem.AskStepsData
-
- steps - Variable in class nxopen.uf.UFAssem.AskStepsOfPartOccData
-
- stepSetNameNx(Tag, Tag, String) - Method in interface nxopen.uf.UFSf
-
- stepSize() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the extract step size
License requirements: None.
- stepSize() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the scan step size
License requirements: None.
- stepSize() - Method in interface nxopen.cam.InspectionScanArcBuilder
-
Returns the builder for step size
License requirements: None.
- stepSize() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the builder for step size
License requirements: None.
- stepSize() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the builder for step size
License requirements: None.
- stepSize() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the builder for step size
License requirements: None.
- stepSize() - Method in interface nxopen.cam.InspectionScanLineBuilder
-
Returns the builder for step sizee
License requirements: None.
- stepSize() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the step size.
- stepSize() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Step Size Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- stepSizeDouble() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Returns the clearence step size double
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- stepStatusAsString() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SelectElement
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SelectFacetRegion
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SelectFeature
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SelectNode
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyAxis
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyLocation
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyPlane
-
Returns the string specifying the default StepStatus
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the StepStatus as string
License requirements: None.
- stepStatusAsString() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the StepStatus as string
License requirements: None.
- stepTime() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- stepTimeExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Step Time Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- stepTo(int) - Method in interface nxopen.motion.AnimationControl
-
Animation step to a special step
License requirements: mechanisms ("MECHANISMS")
.
- stepTo(int) - Method in interface nxopen.motion.SpreadsheetRunControl
-
SpreadsheetRun step to special step
License requirements: mechanisms ("MECHANISMS")
.
- stepToAssemblyPosition() - Method in interface nxopen.motion.AnimationControl
-
Animation step to assembly position
License requirements: mechanisms ("MECHANISMS")
.
- stepToAssemblyPosition() - Method in interface nxopen.motion.ArticulationControl
-
Articulation to assembly position
License requirements: mechanisms ("MECHANISMS")
.
- stepToAssemblyPosition() - Method in interface nxopen.motion.SpreadsheetRunControl
-
SpreadsheetRun to assembly position
License requirements: mechanisms ("MECHANISMS")
.
- stepToDesignPosition() - Method in interface nxopen.motion.AnimationControl
-
Animation step to design position
License requirements: mechanisms ("MECHANISMS")
.
- stepToDesignPosition() - Method in interface nxopen.motion.ArticulationControl
-
Articulation to design position
License requirements: mechanisms ("MECHANISMS")
.
- stepToDesignPosition() - Method in interface nxopen.motion.SpreadsheetRunControl
-
SpreadsheetRun to design position
License requirements: mechanisms ("MECHANISMS")
.
- stepToNextOperation() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Simulation Control Panel: Step to Next Operation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- stepToPreviousOperation() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Simulation Control Panel: Step to Previous Operation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- stepType() - Method in interface nxopen.cae.SimSolutionStep
-
Returns the step type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- stepType() - Method in interface nxopen.features.StepBuilder
-
Returns the step type
License requirements: None.
- stepUp() - Method in interface nxopen.cam.PlungeMillingBuilder
-
Returns the step up customizable item builder
License requirements: None.
- StepUpBuilder - Interface in nxopen.cam
-
Represents a StepUp Builder .
- stepValue() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the step value to control the accurate for demo cylinder visibility and blind volume area calculation.
- stepWallBlendRadiusDim1() - Method in interface nxopen.features.StepBuilder
-
Returns the step wall blend radius dimension 1
License requirements: None.
- stepWallBlendRadiusDim2() - Method in interface nxopen.features.StepBuilder
-
Returns the step wall blend radius dimension 2
License requirements: None.
- stepWallMethod1() - Method in interface nxopen.features.StepBuilder
-
Returns the step wall method 1
License requirements: None.
- stepWallMethod2() - Method in interface nxopen.features.StepBuilder
-
Returns the step wall method 2
License requirements: None.
- stepWallRampDim1() - Method in interface nxopen.features.StepBuilder
-
Returns the step wall ramp dimension 1
License requirements: None.
- stepWallRampDim2() - Method in interface nxopen.features.StepBuilder
-
Returns the step wall ramp dimension 2
License requirements: None.
- stepWallThickDim1() - Method in interface nxopen.features.StepBuilder
-
Returns the step wall thickness dimension 1
License requirements: None.
- stepWallThickDim2() - Method in interface nxopen.features.StepBuilder
-
Returns the step wall thickness dimension 2
License requirements: None.
- STI_TIRE - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- STI_TIRE_PROPERTY - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- stickCollision() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
Returns the option for stick when collision.
- stickyFactor() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- stickyForce() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the sticky factor Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- STICTION - Static variable in class nxopen.motion.JointFrictionAdams.FrictionEffect
-
- STICTION - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionEffect
-
- stictionTransitionVelocityExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the stiction transition velocity expression
License requirements: None.
- stictionTransitionVelocityExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the stiction transition_velocity expression
License requirements: None.
- stictionVelocity() - Method in interface nxopen.motion.BodyContactLms
-
Returns the stiction velocity
License requirements: None.
- stictionVelocity() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the stiction velocity
License requirements: None.
- stictionVelocityExpression() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the stiction velocity expression
License requirements: None.
- stictionVelocityExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the stiction velocity expression
License requirements: None.
- Stiffener - Interface in nxopen.features.shipdesign
-
Represents a stiffener feature
To create or edit an instance of this class, use
StiffenerBuilder
Created in NX8.0.0
- STIFFENER - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.Types
-
Stiffener type
- STIFFENER_BY_SUPPORT - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.Types
-
Stiffener By Support type
- STIFFENER_BY_SUPPORT_DIVIDE - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types
-
The data represents a stiffener divide feature, for a stiffener by support.
- STIFFENER_DIVIDE - Static variable in class nxopen.features.shipdesign.ShipPreparationInfo.Types
-
The data represents a stiffener divide feature.
- STIFFENER_SYSTEM - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Stiffener System type
- STIFFENER_SYSTEM - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- StiffenerBuilder - Interface in nxopen.features.shipdesign
-
- StiffenerBuilder.AttachmentOption - Class in nxopen.features.shipdesign
-
The stiffener attachment plate option
- StiffenerBuilder.CreatePathData - Class in nxopen.features.shipdesign
-
- StiffenerBuilder.EdgeReinforcementAlignmentMethod - Class in nxopen.features.shipdesign
-
the edge reinforcement alignment method
- StiffenerBuilder.EdgeReinforcementPlacementMethods - Class in nxopen.features.shipdesign
-
The edge reinforcement placement method
- StiffenerBuilder.EndCutTypes - Class in nxopen.features.shipdesign
-
this specifies how the end cuts are applied
- StiffenerBuilder.KnuckleOptions - Class in nxopen.features.shipdesign
-
the knuckle option
- StiffenerBuilder.MountingMethods - Class in nxopen.features.shipdesign
-
the mounting method offset type
- StiffenerBuilder.OrientationMethod - Class in nxopen.features.shipdesign
-
The stiffener orientation method
- StiffenerBuilder.Types - Class in nxopen.features.shipdesign
-
the feature type: Stiffener or Edge Reinforcement
- stiffenerBySupportMethod() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
Returns the stiffener by support path method
License requirements: None.
- StiffenerBySupportPathBuilder - Interface in nxopen.features.shipdesign
-
This class defines the builder to collect stiffener by support path data for Stiffener feature.
- StiffenerBySupportPathBuilder.AlignedTo - Class in nxopen.features.shipdesign
-
Which face the stiffener is aligned to
- StiffenerBySupportPathBuilder.Method - Class in nxopen.features.shipdesign
-
Type of Stiffener by Support Method
- StiffenerBySupportPathBuilder.Scenario - Class in nxopen.features.shipdesign
-
Scenarios of Stiffener by Support
- StiffenerBySupportPathBuilder.SetBackMethod - Class in nxopen.features.shipdesign
-
Type of set back method
- stiffenerBySupportPathData() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the path data used to define the support information of the stiffener.
- stiffenerBySupportPathData() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the path data used to define the support information of the stiffener.
- StiffenerLimitBuilder - Interface in nxopen.features.shipdesign
-
This class defines the path limit method used by a Stiffener or Edge Reinforcement feature.
- StiffenerLimitBuilder.LimitType - Class in nxopen.features.shipdesign
-
Path limiting method
- stiffenerStock() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the stock data used to define the stock information of the stiffener.
- StiffenerStockBuilder - Interface in nxopen.features.shipdesign
-
This class defines the Profile or Plate stock for a Stiffener or Edge Reinforcement feature.
- StiffenerStockBuilder.StockSectionType - Class in nxopen.features.shipdesign
-
Type of Stiffener/Edge Reinforcement stock: Profile or Plate
- StiffenerSystem - Interface in nxopen.features.shipdesign
-
Represents a stiffener system feature.
- StiffenerSystemBuilder - Interface in nxopen.features.shipdesign
-
- StiffenerSystemBuilder.EndCutTypes - Class in nxopen.features.shipdesign
-
Used to specify the type of end cut to be used at the extreme ends of the stiffener system.
- StiffenerSystemBuilder.MeasureAlongModes - Class in nxopen.features.shipdesign
-
Used to specify how the spacing and offset is to be measured.
- StiffenerSystemBuilder.MountingMethods - Class in nxopen.features.shipdesign
-
the mounting method offset type
- StiffenerSystemBuilder.OffsetSpacingModes - Class in nxopen.features.shipdesign
-
Used to specify if a single or double offset and spacing definition is to be used.
- StiffenerSystemBuilder.OrientationMethods - Class in nxopen.features.shipdesign
-
Used to specify the type of reference to use for specifying the orientation of the stiffener system.
- StiffenerSystemBuilder.PointMethods - Class in nxopen.features.shipdesign
-
Used to specify whether points or planes are being used for the points definition.
- StiffenerSystemBuilder.Types - Class in nxopen.features.shipdesign
-
Used to specify how the path of the stiffener system is defined.
- STIFFNESS - Static variable in class nxopen.cae.connections.ModelizationResultType
-
Stiffness
- stiffness - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskSpringData
-
Spring stiffness value either translational in units N/mm or lbf/in
or rotational in units N-mm or lbf-in.
- stiffness() - Method in interface nxopen.motion.BodyContactLms
-
Returns the stiffness
License requirements: None.
- stiffness() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the stiffness
License requirements: None.
- STIFFNESS - Static variable in class nxopen.motion.BushingCylindricalCoefficientTypes
-
stiffness type
- STIFFNESS - Static variable in class nxopen.motion.BushingSphericalCoefficientTypes
-
stiffness type
- stiffness() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the stiffness of the normal mode
License requirements: mechanisms ("MECHANISMS")
.
- stiffness - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- stiffness - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- STIFFNESS_AND_DAMPING - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Stiffness and Damping
- STIFFNESS_AND_DAMPING - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Stiffness and Damping
- STIFFNESS_AND_DAMPING - Static variable in class nxopen.cae.XyFunctionMotionType
-
Function is Stiffness and Damping
- stiffnessCoefficients() - Method in interface nxopen.motion.BushingCylindricalCoefficients
-
Returns the stiffness coefficients.
- stiffnessCoefficients() - Method in interface nxopen.motion.BushingGeneralCoefficients
-
- stiffnessCoefficients() - Method in interface nxopen.motion.BushingSphericalCoefficients
-
Returns the stiffness coefficients.
- stiffnessCurve() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the stiffness function
License requirements: None.
- stiffnessCurveProfile() - Method in interface nxopen.motion.SpringBuilder
-
Returns the stiffness 2D profile.
- stiffnessExpression() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the stiffness expression
License requirements: None.
- stiffnessExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the stiffness expression
License requirements: None.
- stiffnessExpression() - Method in interface nxopen.motion.CurveContactAdams
-
Returns the stiffness expression
License requirements: None.
- stiffnessExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the stiffness expression
License requirements: None.
- stiffnessExpression() - Method in interface nxopen.motion.SpringBuilder
-
Returns the stiffness expression
License requirements: None.
- stiffnessFunction() - Method in interface nxopen.motion.SpringBuilder
-
Returns the function tag.
- stiffnessMethod - Variable in class nxopen.uf.UFCurve.BridgeData
-
- stiffnessOption() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the stiffness type.
- stiffnessProfile() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the stiffness Profile.
- stiffnessR() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness R
License requirements: None.
- stiffnessRR() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness RR
License requirements: None.
- stiffnessRS() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness RS
License requirements: None.
- stiffnessRX() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness RX
License requirements: None.
- stiffnessRY() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness RY
License requirements: None.
- stiffnessRZ() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness RZ
License requirements: None.
- stiffnessS() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness RS
License requirements: None.
- stiffnessState() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the stiffness state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- stiffnessSurfaceProfile() - Method in interface nxopen.motion.SpringBuilder
-
Returns the stiffness 3D profile.
- stiffnessType() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the mass
License requirements: None.
- stiffnessType() - Method in interface nxopen.motion.SpringBuilder
-
Returns the stiffness type
License requirements: None.
- stiffnessValue() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the stiffness value
License requirements: mechanisms ("MECHANISMS")
.
- stiffnessX() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness X
License requirements: None.
- stiffnessY() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness Y
License requirements: None.
- stiffnessZ() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the stiffness Z
License requirements: None.
- STILL_ASSIGNED - Static variable in class nxopen.routing.SingleDevice.DeleteObjectResult
-
Assigned components will not be deleted.
- STILL_ROUTED - Static variable in class nxopen.routing.SingleDevice.DeleteObjectResult
-
Routed connections will not be deleted.
- stillRunning - Variable in class nxopen.uf.UFCfi.SpawnCheckStatusData
-
- STING - Static variable in class nxopen.routing.RoutePartDescriptor.CharxType
-
- stitchMethod() - Method in interface nxopen.cae.EdgeSticherBuilder
-
Returns the stitch method
License requirements: None.
- stitchOption() - Method in interface nxopen.cae.EdgeSticherBuilder
-
Returns the operand type for auto-stitch edge
License requirements: None.
- stitchOption() - Method in interface nxopen.cae.FaceFaceImprintBuilder
-
Returns the output stitch option
License requirements: None.
- stitchToggle() - Method in interface nxopen.cae.EdgeFaceImprintBuilder
-
Returns the stitch toggle state
License requirements: None.
- stitchToggle() - Method in interface nxopen.cae.ImprintBuilder
-
Returns the stitch toggle state
License requirements: None.
- STL - Static variable in class nxopen.ame.ProgrammingLanguage
-
- STL - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.Format
-
Represents surfaces in .stl file
- STL_FORMAT - Static variable in class nxopen.uf.UFMotion.AnlGeometryFormat
-
- STL_STATE_base - Static variable in class nxopen.uf.UFConstants
-
- STLCreator - Interface in nxopen
-
Represents a
STLCreator
to be used when exporting the STL Data
This class is created using
DexManager
.
- STLCreator.OutputTypeEnum - Class in nxopen
-
Options for outputing solid bodies to STL
- STLCreator.SheetBodyExportOptionEnum - Class in nxopen
-
Options for choosing sheet bodies export option
- StlError() - Constructor for class nxopen.uf.UFStd.StlError
-
- StlError(int, Tag, int, double[], double[]) - Constructor for class nxopen.uf.UFStd.StlError
-
- stlfileUnits() - Method in interface nxopen.facet.STLImportBuilder
-
Returns the STL file units
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- stlFileUnits() - Method in interface nxopen.features.BodyByEquationBuilder
-
Returns the option to specify the size of an STL unit.
- STLImportBuilder - Interface in nxopen.facet
-
The STL file import builder.
- STLImportBuilder.AngularToleranceTypes - Class in nxopen.facet
-
The angular tolerance types
- STLImportBuilder.FacetBodyTypes - Class in nxopen.facet
-
These represent the type of body that will get created on importing the STL file
- STLImportBuilder.STLFileUnitsTypes - Class in nxopen.facet
-
The STL file units types
- STLImporter - Interface in nxopen
-
Used to import an STL file into the work part.
- STLImporter.AngularToleranceType - Class in nxopen
-
Specifies the angular tolerance.
- STLImporter.FileFormatType - Class in nxopen
-
Specifies the STL file format.
- STLImporter.FileUnitsType - Class in nxopen
-
Specifies the STL file units.
- StlParameters() - Constructor for class nxopen.uf.UFMotion.StlParameters
-
- StlParameters(double, double, double) - Constructor for class nxopen.uf.UFMotion.StlParameters
-
- StlParams() - Constructor for class nxopen.uf.UFStd.StlParams
-
- StlParams(double, float, boolean, boolean, int) - Constructor for class nxopen.uf.UFStd.StlParams
-
- stock() - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
Returns the stock value
License requirements: None.
- stock() - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
Returns the stock value
License requirements: None.
- stock() - Method in interface nxopen.cam.BoundaryMillingSet
-
Returns the stock value
License requirements: None.
- stock() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Returns the stock value
License requirements: None.
- stock() - Method in interface nxopen.cam.BoundaryTurnSet
-
Returns the stock value
License requirements: None.
- STOCK - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
-
Part Off Depth Mode: Stock
- stock() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut stock
License requirements: None.
- STOCK - Static variable in class nxopen.display.CameraBuilder.LensAngle
-
Stock Lenses
- stock() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the plate stock builder, used to define the plate material, grade,
thickness, mass density, and thicken option.
- STOCK - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignStockSubType
-
Default stock subtype.
- STOCK - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignStockType
-
Default stock type.
- STOCK - Static variable in class nxopen.preferences.RoutingPartLibrary.RootType
-
Top node for selecting stocks.
- stock - Variable in class nxopen.routing.BendReportManager.SegmentInformation
-
- STOCK - Static variable in class nxopen.routing.PathStockBuilder.AssignStockType
-
Default stock type.
- STOCK - Static variable in class nxopen.routing.RouteManager.PartType
-
- STOCK - Static variable in class nxopen.routing.RouteManager.RootType
-
Top node for selecting stocks.
- stock() - Method in interface nxopen.routing.RouteSweptTwistBuilder
-
Returns the stock
License requirements: routing_harness ("Routing Harness")
.
- Stock - Interface in nxopen.routing
-
The
Stock
object represents a material (such as as pipe or tube)
that covers a path of segments.
- STOCK - Static variable in class nxopen.routing.StockBrowserBuilder.TypeFilter
-
Stock
- stock - Variable in class nxopen.uf.UFCambnd.AppData
-
- stock - Variable in class nxopen.uf.UFCamgeom.AppData
-
- stock - Variable in class nxopen.uf.UFRoute.AskAppViewDefStockData
-
- stock - Variable in class nxopen.uf.UFRoute.AskSegmentStockData
-
- stock - Variable in class nxopen.uf.UFRoute.AskStockDataStockData
-
- stock - Variable in class nxopen.uf.UFRoute.AskWireStockData
-
- Stock.BodySegmentMapData - Class in nxopen.routing
-
- Stock.PortsData - Class in nxopen.routing
-
- STOCK_AS_COMPONENT - Static variable in class nxopen.preferences.RoutingStock.StockModeFlag
-
component created with solid body in the component
- STOCK_AS_COMPONENT - Static variable in class nxopen.routing.StockUse
-
Stock as Component stock in the work part.
- STOCK_COMPONENT - Static variable in class nxopen.routing.RouteManager.PartType
-
- STOCK_CONVERSION_ERROR - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
Error converting units of loaded stock part to that of stock definition being refreshed
- STOCK_DATA_MISSING_SEARCH_ATTRIBUTES - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
No attributes used for searching library found
- STOCK_DATA_NOT_FOUND_IN_LOADED_PART - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
Unable to find a stock definition in the loaded stock part
- STOCK_DATA_TAG_INVALID - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
NULL stock definition encountered
- STOCK_IN_COMPONENT - Static variable in class nxopen.routing.StockUse
-
Stock as Component stock in the component part.
- STOCK_OFFSET - Static variable in class nxopen.routing.StockOffsetPointBuilder.PointType
-
Routing stock offset point.
- STOCK_OFFSET_PORT - Static variable in class nxopen.routing.Port.PortType
-
Stock Offset Port
- STOCK_OUT - Static variable in class nxopen.EffectivityConditionBuilder.ToUnitType
-
Sets stock out unit as toUnit effectivity range
- STOCK_PART_NOT_FOUND_FOR_LOADING - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
Problem loading the stock part
- STOCK_PART_NOT_FOUND_IN_REUSE_LIBRARY - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
Cannot find stock under the stock or overstock root nodes in the Reuse Library
- STOCK_PART_NOT_REQUIRED - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
Stock part name not found indicating there is no stock part
- STOCK_PER_PASS - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Stock Per Pass
- STOCK_PORT - Static variable in class nxopen.routing.Port.PortType
-
Stock Port
- STOCK_STYLE - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Stock Style command.
- STOCK_STYLE - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- stockAllowance() - Method in interface nxopen.cam.ProbeStockParametersBuilder
-
Returns the stock allowance
License requirements: None.
- stockAnchor() - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Returns
License requirements: routing_base ("Routing Basic")
.
- stockAnchor() - Method in interface nxopen.preferences.RoutingStock
-
Returns the
Anchor
name associated with the stock preferences.
- stockAnchor() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the
Anchor
name associated with the overstock.
- stockAnchor() - Method in interface nxopen.routing.StockBuilder
-
Returns the
Anchor
name associated with the stock.
- stockAskName(Tag) - Method in interface nxopen.uf.UFRoute
-
- StockBrowserBuilder - Interface in nxopen.routing
-
Builder class for stock browser .
- StockBrowserBuilder.TypeFilter - Class in nxopen.routing
-
Filter type
- StockBuilder - Interface in nxopen.mechanicalrouting
-
Builder for creating/editing stocks.
- StockBuilder - Interface in nxopen.routing
-
Builder for creating/editing stocks.
- StockBuilder.StockStyleType - Class in nxopen.routing
-
The stock display style
- StockCollection - Interface in nxopen.routing
-
Represents a collection of
Stock
objects.
- StockColorBuilder - Interface in nxopen.routing
-
- stockComponentLockedPlugin(Stock) - Method in interface nxopen.routing.CustomManager.StockComponentLockedPlugin
-
This defines the prototype for the stock component locked plugin.
- stockData() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the stock data used to define the stock information of the edge reinforcement.
- stockData() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the stock data used to define the stock information of the stiffener.
- stockData() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the stock data
License requirements: None.
- stockData() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the stock data used to define the stock information of the stiffener.
- StockData - Interface in nxopen.routing
-
A
StockData
contains the various profiles, characteristic information,
Anchor
and other attributes that define
Stock
objects.
- stockData() - Method in interface nxopen.routing.StockDataRefreshBuilder
-
Returns
License requirements: routing_base ("Routing Basic")
.
- StockDataCollection - Interface in nxopen.routing
-
Represents a collection of
StockData
objects.
- StockDataRefreshBuilder - Interface in nxopen.routing
-
- StockDataRefreshBuilder.RefreshStatus - Class in nxopen.routing
-
The stock data refresh status .
- stockDatas() - Method in interface nxopen.routing.RouteManager
-
StockData collection .
- stockDatas - Variable in class nxopen.uf.UFRoute.AskAnchorStockData
-
- stockDataTag - Variable in class nxopen.uf.UFRoute.LoadStockData
-
- stockDataTags - Variable in class nxopen.uf.UFRoute.AskCrossStockData
-
- StockDataType - Class in nxopen.routing
-
Whether the
StockData
was generated by the
bundling algorithm used for routing wires.
- StockDefinition - Interface in nxopen.routing
-
Represents Routing StockDefinition object
Creator not available in KF.
- stockDefinition() - Method in interface nxopen.routing.StockDevice
-
Returns the stock definition.
- StockDevice - Interface in nxopen.routing
-
The Routing StockDevice corresponds to a generic stock instance
of
SingleDevice
.
- stockDriveBuilder() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the builder of Surface Stock (inheritable double)
License requirements: None.
- stockFolder() - Method in interface nxopen.preferences.RoutingStock
-
Returns the default folder for stock components
License requirements: routing_base ("Routing Basic")
.
- stockLength() - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
Returns the value that specifies the stock length type.
- stockLength() - Method in interface nxopen.routing.StockDevice
-
Returns the stock length.
- stockLengthDisplayFlag() - Method in interface nxopen.preferences.RoutingPart
-
Returns the stock length display for the Routing bill of material.
- stockLensType() - Method in interface nxopen.display.CameraBuilder
-
Returns the stock lens type
License requirements: None.
- stockList() - Method in interface nxopen.cam.BoundaryTurnVariableStock
-
Returns the stock list
License requirements: None.
- stockMethodType() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Returns the method to determine which stock to assign.
- stockMode() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut stock mode
License requirements: None.
- stockMode() - Method in interface nxopen.preferences.RoutingStock
-
Returns the stock creation mode
License requirements: routing_base ("Routing Basic")
.
- StockOffsetPointBuilder - Interface in nxopen.routing
-
Applies Assemblies Constraints to a selected
Point
or
ControlPoint
to mimic the update/move behavior of
the input smart
Point
.
- StockOffsetPointBuilder.PointData - Class in nxopen.routing
-
- StockOffsetPointBuilder.PointType - Class in nxopen.routing
-
Point Type
- StockOffsetPort - Interface in nxopen.routing
-
StockOffsetPort
class handles the relationship
between a component part's port occurrence and the dumb offset port in
the work part.
- StockOffsetPortCollection - Interface in nxopen.routing
-
- stockOffsetPorts() - Method in interface nxopen.routing.RouteManager
-
Stock Offset Port Collection.
- stockPart - Variable in class nxopen.preferences.RoutingStock.DefaultStockData
-
Characteristic list used to find the appropriate
StockData
for building the stock.
- stockpart - Variable in class nxopen.routing.PathStockBuilder._specified_stock_with_applied_charxData
-
Characteristic list used to find the appropriate
StockData
for building the stock.
- stockPartBuilder() - Method in interface nxopen.cam.TurnMethodBuilder
-
Returns the part stock builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- StockPartConverterBuilder - Interface in nxopen.routing
-
- StockPartConverterBuilder.PartOption - Class in nxopen.routing
-
Represents the option to indicate the scope of stock part coversion
- stockPathId() - Method in interface nxopen.pid.PipeBuilder
-
Returns the stock path ID of the pipe.
- stockPerPassBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the stock per pass
License requirements: None.
- StockPerPassBuilder - Interface in nxopen.cam
-
Represents a Builder which holds the data for a set of individual stock per pass.
- stockPieceCount() - Method in interface nxopen.annotations.BillOfMaterialBuilder
-
Returns the value that specifies whether include report cout of stock pieces.
- StockPort - Interface in nxopen.routing
-
StockPort
objects are automatically created and updated by
Stock
objects.
- stocks() - Method in interface nxopen.routing.RouteManager
-
Stock collection .
- stocks - Variable in class nxopen.uf.UFRoute.AskAnchorStock
-
- stocksegments - Variable in class nxopen.routing.Stock.BodySegmentMapData
-
Stock segments.
- stockSelection() - Method in interface nxopen.routing.RouteSweptFoldBuilder
-
Returns the stock selection.
- stockSetting() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the stock setting
License requirements: None.
- stockSettings() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
Returns the builder for assigning stock to the new path.
- stockSettings() - Method in interface nxopen.mechanicalrouting.InsulationBuilder
-
Returns the stock settings for Insulation assignment.
- stockSettings() - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Returns the path stock settings required to assign stock
License requirements: routing_base ("Routing Basic")
.
- stockSettings() - Method in interface nxopen.routing.FillerStockBuilder
-
Returns the stock settings for creating filler stock.
- stockSettings() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the stock settings for overstock assignment.
- stockSettings() - Method in interface nxopen.routing.QuickPathBuilder
-
Returns the stock settings for this path.
- stockSettings() - Method in interface nxopen.routing.SpaceReservationBuilder
-
Returns the stock settings for creating space reservation stock
License requirements: routing_base ("Routing Basic")
.
- stockSettings() - Method in interface nxopen.routing.StockBuilder
-
Returns the stock settings for stock assignment.
- stockSettings() - Method in interface nxopen.routing.StockTransitionBuilder
-
Returns the stock settings for stock assignment.
- StockSizeBuilder - Interface in nxopen.tooling
-
Represents a Tooling::StockSizeBuilder builder.
- StockSizeBuilder.CalculateBoxSizeData - Class in nxopen.tooling
-
- StockSizeBuilder.Cylinder - Class in nxopen.tooling
-
Represents the base circle type of cylinder.
- StockSizeBuilder.RefCsysType - Class in nxopen.tooling
-
Represents the reference CSYS type.
- StockSizeBuilder.Shape - Class in nxopen.tooling
-
Represents the shape of stock size.
- StockSizeBuilder.Types - Class in nxopen.tooling
-
Represents the shape of stock size.
- StockSizeCollection - Interface in nxopen.tooling
-
Represents a collection of StockSize
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- stockSizes() - Method in interface nxopen.tooling.ToolingManager
-
Returns the StockSizeCollection instance belonging to this part .
- stocksToAlign() - Method in interface nxopen.routing.AlignStockBuilder
-
Returns a collection of stocks to align.
- stockStyle() - Method in interface nxopen.routing.StockBuilder
-
Returns the stock style of the stock to assign
License requirements: routing_base ("Routing Basic")
.
- StockStyle - Class in nxopen.routing
-
- StockStyleBuilder - Interface in nxopen.routing
-
Builder class to assigns style to the selected stock .
- StockStyleBuilder.StockStyle - Class in nxopen.routing
-
Enum to define the stock style
- stockSubType() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Returns the type of stock being assigned.
- StockTransition - Interface in nxopen.routing
-
- StockTransitionBuilder - Interface in nxopen.routing
-
Builder for creating/editing stockTransition.
- stockType() - Method in interface nxopen.mechanicalrouting.PathStockPreferenceBuilder
-
Returns the type of stock being assigned.
- stockType() - Method in interface nxopen.routing.PathStockBuilder
-
Returns the type of stock being assigned.
- StockType - Class in nxopen.routing
-
Available overstock stock types for Overstock Applications for a given Overstock
- stockType() - Method in interface nxopen.tooling.StockSizeBuilder
-
- StockUse - Class in nxopen.routing
-
Describes how the stock is used.
- stockValue() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the stock value
License requirements: None.
- STOP - Static variable in class nxopen.cae.Post.AnimationControl
-
- STOP - Static variable in class nxopen.cam.NcmWedmBuilder.GlobalStopPointTypes
-
stop points option stop
- STOP - Static variable in class nxopen.cam.WedmGeomBuilder.StopPointTypes
-
stop point option stop
- STOP - Static variable in class nxopen.cam.WedmOperationBuilder.StopPointTypes
-
stop point option stop
- stop() - Method in interface nxopen.features.EditWithRollbackManager
-
Rolls the model to the original current feature after the feature is edited with rollback
License requirements: None.
- stop() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
TODO: fill in a description for this
License requirements: None.
- STOP - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- STOP - Static variable in class nxopen.mechatronics.MechatronicsSession.SimulationAction
-
Stop
- stop() - Method in interface nxopen.motion.AnimationControl
-
Animation stop
License requirements: mechanisms ("MECHANISMS")
.
- stop() - Method in interface nxopen.motion.ArticulationControl
-
Articulation stop
License requirements: mechanisms ("MECHANISMS")
.
- stop() - Method in interface nxopen.motion.SpreadsheetRunControl
-
SpreadsheetRun stop
License requirements: mechanisms ("MECHANISMS")
.
- stop() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Simulation Control Panel: Stop the simulation
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- STOP - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode
-
STOP
- stop() - Method in interface nxopen.sim.TimeAnalysis
-
Stop the Time Analysis
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- stop() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Stop simulation
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- STOP_LIGHT - Static variable in class nxopen.cae.Post.Spectrum
-
- STOP_PLAYBACK - Static variable in class nxopen.preferences.SessionMeasureRequirements.ActionOnViolation
-
Suspend playback and wait for acknowledgement for requirements violations
- STOP_PROCESSING - Static variable in class nxopen.drawings.ConversionProcessSettingsBuilder.ActionOnErrorEnum
-
- STOP_PROCESSING_AFTER_LIMIT - Static variable in class nxopen.drawings.ConversionProcessSettingsBuilder.ActionOnErrorEnum
-
- STOP_PROCESSOR - Static variable in class nxopen.uf.UFDpud.Purpose
-
- STOP_UPDATE - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Handlingbodies
-
Deprecated.
- STOP_UPDATE - Static variable in class nxopen.drawings.ViewWorkflowBuilder.HandlingBodiesType
-
- STOP_UPDATEAND_NOTIFY_USER - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Handlingbodies
-
Deprecated.
- STOP_UPDATEAND_NOTIFY_USER - Static variable in class nxopen.drawings.ViewWorkflowBuilder.HandlingBodiesType
-
- stopActive() - Method in interface nxopen.cam.ManualControlBuilder
-
Returns the stop command status mode
License requirements: None.
- stopAfter() - Method in interface nxopen.mfg.am.Nester3D
-
Returns the stop after
License requirements: None.
- stopAnimation() - Method in interface nxopen.motion.LoadTransferControl
-
Stops animation
License requirements: mechanisms ("MECHANISMS")
.
- stopAtIntersection() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the StopAtIntersection
License requirements: None.
- stopAtIntersection() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the StopAtIntersection
License requirements: None.
- stopCheckCollision() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Returns the stop check collision if find next collision
License requirements: None.
- stopCheckConstantStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the constant stock for stop check geometry
License requirements: None.
- stopCheckFaceStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the face stop for start check geometry
License requirements: None.
- stopCheckRadialStock() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the radial stock for stop check geometry
License requirements: None.
- stopCondition() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Returns the stop condition to end the optimization
License requirements: None.
- stopDistance() - Method in interface nxopen.cam.InitialProfilePlunge
-
Returns the stop distance
License requirements: None.
- stopDistance() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut stop distance
License requirements: None.
- stopDrag() - Method in interface nxopen.formboard.FlipComponentBuilder
-
Stop the drag operation of selected object.
- stopDrag() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- stopDrag() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
End a drag operation
Applies the transforms obtained from solving the constraint network on routing objects.
- stopDrag() - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
End a drag operation
License requirements: routing_base ("Routing Basic")
.
- stopDrag() - Method in interface nxopen.routing.ClockPartBuilder
-
End a drag operation.
- stopDrag() - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Stop the drag operation if it has begun.
- stopDrag() - Method in interface nxopen.routing.TransformPathBuilder
-
End a drag operation.
- stopIteration() - Method in interface nxopen.uf.UFClone
-
- stopLimit() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the number of gouges to be used as a limit to stop
License requirements: None.
- stopOnCollision() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the stop on collision
License requirements: None.
- stopOnError() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of stopping checking process on error status.
- stopOnEvent() - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
Returns the Stop_On_Event flag of
PackagingInterference
object
License requirements: mechanisms ("MECHANISMS")
Created in NX4.0.0
- stopOnEvent() - Method in interface nxopen.motion.PackagingMeasureBuilder
-
Returns the Stop_On_Event flag of
PackagingMeasure
object
License requirements: mechanisms ("MECHANISMS")
Created in NX4.0.0
- stopOnHistoryBuffer() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the stop on history buffer
License requirements: None.
- stopOnLimit() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the indicator to stop when the number of gouges has equalled the stop limit
License requirements: None.
- stopOnLimitViolation() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the stop on limit violation
License requirements: None.
- stopOnRapidThroughIpw() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the stop on rapid through ipw
License requirements: None.
- stopOnWarning() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of stopping checking on warning status.
- stopPercentage() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut stop percentage
License requirements: None.
- stopPoint() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the stop point
License requirements: None.
- stopPoint() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut stop point
License requirements: None.
- stopPointDistance() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Stop Point Distance
License requirements: cam_base ("CAM BASE")
.
- stopPointDistanceBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the stop_point_distance builder
License requirements: cam_base ("CAM BASE")
.
- stopPointDistanceBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the stop_point_distance builder
License requirements: cam_base ("CAM BASE")
.
- stopPointFlag() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Stop Point Flag
License requirements: cam_base ("CAM BASE")
.
- stopPointFlag() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the Stop Point Flag
License requirements: cam_base ("CAM BASE")
.
- stopPointFlag() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the Stop Point Flag
License requirements: cam_base ("CAM BASE")
.
- stopPointType() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Stop Point Type
License requirements: cam_base ("CAM BASE")
.
- stopPointType() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the Stop Point Type
License requirements: cam_base ("CAM BASE")
.
- stopPointType() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the Stop Point Type
License requirements: cam_base ("CAM BASE")
.
- StopPosition - Interface in nxopen.cam
-
Represents a stop position .
- stopPosition() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the stop position
License requirements: None.
- stopPosition() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut stop position
License requirements: None.
- StopPosition.Types - Class in nxopen.cam
-
the stop at options .
- stopPositionMethod() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the stop position method
License requirements: None.
- stopRadius() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the scan stop radius
License requirements: None.
- stopRayTracedDisplay() - Method in interface nxopen.display.RayTracedStudioBuilder
-
Stop the Ray Traced Studio progressive display.
- StopshortData() - Constructor for class nxopen.features.EdgeBlendBuilder.StopshortData
-
- stopshortData - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- stopSymmetricModeling() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
Stops the symmetric modeling.
- stopWhenLimitReached() - Method in interface nxopen.cam.GougeCheckBuilder
-
Returns the stop when limit reached.
- stopWhenLimitReachedMaximumLimit() - Method in interface nxopen.cam.GougeCheckBuilder
-
Returns the stop when limit reached maximum limit.
- STOR - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.DeviceTypeOptions
-
Use STOR
- STORAGE_BLOCK - Static variable in class nxopen.die.HeelpostBuilder.Types
-
no hole allowed
- storeAttributes() - Method in interface nxopen.pdm.DatabaseAttributeManager
-
Register DB_PART_NAME and DB_PART_DESC attributes with values set in the attribute_manager
License requirements: None.
- storeColor() - Method in interface nxopen.features.ColorFeatureBuilder
-
Returns the save color property to feature
License requirements: None.
- storeEnable() - Method in interface nxopen.motion.GraphBuilder
-
- storeExecutableCode(String, String) - Method in interface nxopen.mechatronics.RuntimeBehaviorBuilder
-
Stores executable code for source
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- storeFaceTag - Variable in class nxopen.facet.FacetingParameters
-
Should this FACET body record face tags or not
(this does not apply to JT).
- storeFaceTags - Variable in class nxopen.uf.UFFacet.Parameters
-
- storeGraphInAfu(String) - Method in interface nxopen.motion.LoadTransferBuilder
-
Stores graph objects in afu file
License requirements: mechanisms ("MECHANISMS")
.
- storeHarnessesToFlatten(HarnessDevice[]) - Method in interface nxopen.formboard.FormboardManager
-
Examines the input list of harnesses and stores information from the harnesses into the part containing
this
FormboardManager
.
- storeLogFileInTeamCenter() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
Returns the store log file in teamcenter
License requirements: None.
- storeModelViewPreview() - Method in interface nxopen.PreviewPropertiesBuilder
-
Returns the store model view preview.
- storeOption() - Method in interface nxopen.cae.responsesimulation.FunctionEvaluationOutputSettings
-
Returns the store option.
- storePartPreview() - Method in interface nxopen.PreviewPropertiesBuilder
-
Returns the store part preview.
- storeSectionParameters() - Method in interface nxopen.tooling.RunnerBuilder
-
Stores current section parameters information.
- storeSpreadsheet(String, String) - Method in interface nxopen.uf.UFXs
-
- str - Variable in class nxopen.uf.UFUi.AskStringInputData
-
- STRAIGHT - Static variable in class nxopen.cae.MappedMeshBuilder.MidNodeType
-
Straight Option
- STRAIGHT - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Straight
- STRAIGHT - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
- STRAIGHT - Static variable in class nxopen.formboard.FormboardLayoutBuilder.BranchShape
-
Each branch forms a straight line.
- STRAIGHT - Static variable in class nxopen.mechatronics.TransportSurfaceBuilder.MoveType
-
Straight
- STRAIGHT - Static variable in class nxopen.motion.SegmentBuilder.TypeChoices
-
Straight
- STRAIGHT - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Straight
- STRAIGHT - Static variable in class nxopen.tooling.EjectorTableBuilder.EjectorType
-
straight ejectors
- STRAIGHT_BEND - Static variable in class nxopen.tooling.UniversalUnformBuilder.BendTypes
-
straight bend type
- STRAIGHT_CAMBER - Static variable in class nxopen.features.shipdesign.DeckBuilder.Types
-
Mold face is being defined by a generated straight camber shape.
- STRAIGHT_SIDED_SPLINE_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- straightElevationChange() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the elevation change of a straight segment
License requirements: mechanisms ("MECHANISMS")
.
- STRAIGHTNESS - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
straightness
- STRAIGHTNESS - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies straightnesss characteristics
- STRAIGHTNESS - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
strainhtness
- STRAIGHTNESS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Straightness
- STRAIGHTNESS_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- STRAIN - Static variable in class nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum
-
- STRAIN - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- STRAIN - Static variable in class nxopen.cae.responsesimulation.StrainGageResult
-
- STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- STRAIN - Static variable in class nxopen.cae.XyFunctionMeasure
-
Strain unit
- STRAIN1DVON_MISES_MAXIMUM - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN1DVON_MISES_MINIMUM - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN1DVON_MISES_STRESS_RECOVERY_POINT_C - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN1DVON_MISES_STRESS_RECOVERY_POINT_D - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN1DVON_MISES_STRESS_RECOVERY_POINT_E - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN1DVON_MISES_STRESS_RECOVERY_POINT_F - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN2DMAJOR_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN2DMAJOR_PRINCIPAL_BOTTOM - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN2DMAXIMUM_SHEAR - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN2DMAXIMUM_SHEAR_BOTTOM - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN2DMINOR_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN2DMINOR_PRINCIPAL_BOTTOM - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN2DVON_MISES - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN2DVON_MISES_BOTTOM - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN3DFIRST_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN3DSECOND_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN3DTHIRD_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN3DVON_MISES - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Strain unit: cm/cm
- STRAIN_ENERGY - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Strain energy
- STRAIN_ENERGY - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- STRAIN_ENERGY - Static variable in class nxopen.cae.Result.Quantity
-
- STRAIN_ENERGY_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- STRAIN_ENERGY_ERROR - Static variable in class nxopen.cae.Result.Quantity
-
- STRAIN_ENERGY_PERCENT - Static variable in class nxopen.cae.Result.Quantity
-
- STRAIN_EQ - Static variable in class nxopen.cae.Result.Quantity
-
- STRAIN_IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Strain unit: in/in
- STRAIN_LIFE_MAX_PRINCIPLE - Static variable in class nxopen.uf.UFSf.DursolFatigueLifeCriterion
-
- STRAIN_LIFE_MAX_SHEAR - Static variable in class nxopen.uf.UFSf.DursolFatigueLifeCriterion
-
- STRAIN_LIFE_MAXIMUM_PRINCIPAL - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum
-
- STRAIN_LIFE_MAXIMUM_PRINCIPAL - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum
-
Maximum Principal
- STRAIN_LIFE_MAXIMUM_SHEAR - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum
-
- STRAIN_LIFE_MAXIMUM_SHEAR - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum
-
Maximum Shear
- STRAIN_M - Static variable in class nxopen.cae.XyFunctionUnit
-
Strain unit: cm/cm
- STRAIN_MAX_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on the maximum principal strain
- STRAIN_MAX_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the maximum principal strain
- STRAIN_MAX_S - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on the maximum shear strain
- STRAIN_MAX_S - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the maximum shear strain
- STRAIN_MECH - Static variable in class nxopen.cae.Result.Quantity
-
- STRAIN_MIN_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on the minimum principal strain
- STRAIN_MIN_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the minimum principal strain
- STRAIN_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Strain unit: mm/mm
- STRAIN_VON_MISES - Static variable in class nxopen.cae.optimization.Response
-
- STRAIN_VON_MISES_CREEP - Static variable in class nxopen.cae.Result.Quantity
-
- STRAIN_XX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Strain XX component
- STRAIN_XX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the strain XX component
- STRAIN_XY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Strain XY component
- STRAIN_XY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the strain XX component
- STRAIN_YY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Strain YY component
- STRAIN_YY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the strain XX component
- STRAIN_YZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Strain YZ component
- STRAIN_YZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the strain XX component
- STRAIN_ZX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Strain ZX component
- STRAIN_ZX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the strain XX component
- STRAIN_ZZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Strain ZZ component
- STRAIN_ZZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the strain XX component
- StrainGage - Interface in nxopen.cae.responsesimulation
-
- strainGage() - Method in interface nxopen.cae.responsesimulation.StrainGageEvaluationSettingBuilder
-
Returns the destination strain Gages
License requirements: nx_response_anlys ("NX Response Analysis")
.
- StrainGageBuilder - Interface in nxopen.cae.responsesimulation
-
- StrainGageCollection - Interface in nxopen.cae.responsesimulation
-
Represents a collection of response analysis strain gage
To obtain an instance of this class, refer to
Manager
Created in NX6.0.0
- StrainGageEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the parameters setting for strain gage evaluation.
- StrainGageEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- StrainGageOrientationPlane - Class in nxopen.cae.responsesimulation
-
Specifies the orientation plane type of Strain Gage
- StrainGagePlacementType - Class in nxopen.cae.responsesimulation
-
Specifies the placement type of Strain Gage
- StrainGageResult - Class in nxopen.cae.responsesimulation
-
Specifies the result type of Strain Gage
- strainGages() - Method in interface nxopen.cae.responsesimulation.Manager
-
Returns the Response Dynamics strain gage collection belonging to this sim part .
- StrainGageShellElementFaceType - Class in nxopen.cae.responsesimulation
-
Specifies the shell element location type of Strain Gage
- StrainGageType - Class in nxopen.cae.responsesimulation
-
Specifies the type of Strain Gage
- strainType() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the strain type
License requirements: None.
- STRAKING - Static variable in class nxopen.features.shipdesign.SeamBuilder.Types
-
Straking seam, used to split up structure into manufacturable size
pieces.
- STRAKING_SEAM - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Straking Seam type
- strakingSplitSystem() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the indication if the straking seams should split the system by default.
- strAnnot() - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
Returns the string to display the name of Pattern file name selected by user.
- strAnnotFileName() - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
Returns the string to display the name of CGM name selected by user.
- strategy() - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionBuilder
-
Returns the optimization strategy
License requirements: None.
- streamColor - Variable in class nxopen.cae.Post.Streamline
-
- STREAMING - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderVideoType
-
Deprecated.
- streamIO() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
Returns the mapping direction. 0 represent input, 1 represent output
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX11.0.0
- streamIO() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilder
-
Returns the data stream direction.
- streamIO() - Method in interface nxopen.mechatronics.SignalConnectionBuilder
-
Returns the mapping direction.
- STREAMLINE - Static variable in class nxopen.cae.Post.AnimationControl
-
- STREAMLINE - Static variable in class nxopen.cae.Post.AnimationType
-
- Streamline() - Constructor for class nxopen.cae.Post.Streamline
-
- Streamline(Post.StreamlineData, Post.StreamlineStyle, Post.StreamlineColor, NXColor, Post.StreamlineSize, double, double, Post.StreamlineLineWeight, Post.StreamlineSynchronization, double) - Constructor for class nxopen.cae.Post.Streamline
-
Constructor for the Streamline object.
- streamlineCutPattern() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the streamline cut pattern
License requirements: None.
- streamlineCutStep() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the streamline cut step
License requirements: None.
- StreamlineData() - Constructor for class nxopen.cae.Post.StreamlineData
-
- StreamlineData(Post.ValueSharingCriterion, Post.NoDataTreatment, double) - Constructor for class nxopen.cae.Post.StreamlineData
-
Constructor for the StreamlineData object.
- StreamlineExtraction() - Constructor for class nxopen.cae.Post.StreamlineExtraction
-
- StreamlineExtraction(Post.StreamlineDirection, double, int, boolean, double, Post.IntegrationScheme, boolean) - Constructor for class nxopen.cae.Post.StreamlineExtraction
-
Constructor for the StreamlineExtraction object.
- STREAMLINES - Static variable in class nxopen.cae.Post.Style
-
- StreamlineSeed() - Constructor for class nxopen.cae.Post.StreamlineSeed
-
- StreamlineSeed(Post.StreamlineExtraction, Point3d, int) - Constructor for class nxopen.cae.Post.StreamlineSeed
-
Constructor for the StreamlineSeed object.
- streamlineSeedSetDelete(int) - Method in interface nxopen.cae.Post
-
Delete a Seed Set.
- streamlineStepover() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the streamline stepover
License requirements: None.
- streamlineToolPosition() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the streamline tool position
License requirements: None.
- streamlineTrimAndExtend() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the streamline trim and extend
License requirements: None.
- streamOption() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
Returns the data stream type.
- streamSize - Variable in class nxopen.cae.Post.Streamline
-
- streamStyle - Variable in class nxopen.cae.Post.Streamline
-
- streamSync - Variable in class nxopen.cae.Post.AnimationStreamline
-
- streamSync - Variable in class nxopen.cae.Post.Streamline
-
- STRENGTH_SAFETY_FACTOR - Static variable in class nxopen.cae.Result.Quantity
-
- strengthAnalysis(String) - Method in interface nxopen.cae.Laminate
-
Perform a strength analysis on the current laminate definition using the current laminate strength loadcase.
- strengthCollection() - Method in interface nxopen.cae.DurabilityManager
-
Returns the durability strength collection belonging to this sim part.
- strengtheningRibbingParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the strengthening ribbing parent builder of the draw die punch.
- strengthLoadcase() - Method in interface nxopen.cae.Laminate
-
Returns the loadcase information used for the laminate strength analysis
License requirements: None.
- strengthRatio() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the strength ratio result
License requirements: None.
- strengthRatio() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the ply and bonding strength ratios
License requirements: None.
- strengthRatio() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the strength ratio
License requirements: None.
- strengthRatioRule() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the strength ratio rule
License requirements: None.
- strengthRatioRule() - Method in interface nxopen.cae.LaminateQuickReportBuilder
-
Returns the ply and bonding strength ratios rule
License requirements: None.
- strengthRatioRule() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the strength ratio summary table enveloping rule
License requirements: None.
- StrengthResultsEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents parameters setting for strength results evaluation.
- StrengthResultsEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- strengthSafetyFactor() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
Returns the strength safety factor.
- strengthSafetyFactor() - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
Returns the strength safety factor toggle
License requirements: None.
- StrengthStressCriteria - Class in nxopen.cae.responsesimulation
-
Specifies strength stress criteria
- StrengthStressMaterialDefinitionMethod - Class in nxopen.cae.responsesimulation
-
Specifies the definition method for material
- StrengthStressOption - Class in nxopen.cae.responsesimulation
-
The options of stress
- STRESS - Static variable in class nxopen.cae.DurabilityEvaluateFatigueHistoryBuilder.FatigueHistoryDataTypeEnum
-
- STRESS - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- STRESS - Static variable in class nxopen.cae.responsesimulation.StrainGageResult
-
- STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- STRESS - Static variable in class nxopen.cae.XyFunctionMeasure
-
Stress unit
- STRESS1DVON_MISES_MAXIMUM - Static variable in class nxopen.cae.optimization.Response
-
- STRESS1DVON_MISES_MINIMUM - Static variable in class nxopen.cae.optimization.Response
-
- STRESS1DVON_MISES_STRESS_RECOVERY_POINT_C - Static variable in class nxopen.cae.optimization.Response
-
- STRESS1DVON_MISES_STRESS_RECOVERY_POINT_D - Static variable in class nxopen.cae.optimization.Response
-
- STRESS1DVON_MISES_STRESS_RECOVERY_POINT_E - Static variable in class nxopen.cae.optimization.Response
-
- STRESS1DVON_MISES_STRESS_RECOVERY_POINT_F - Static variable in class nxopen.cae.optimization.Response
-
- STRESS2DMAJOR_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRESS2DMAJOR_PRINCIPAL_BOTTOM - Static variable in class nxopen.cae.optimization.Response
-
- STRESS2DMAXIMUM_SHEAR - Static variable in class nxopen.cae.optimization.Response
-
- STRESS2DMAXIMUM_SHEAR_BOTTOM - Static variable in class nxopen.cae.optimization.Response
-
- STRESS2DMINOR_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRESS2DMINOR_PRINCIPAL_BOTTOM - Static variable in class nxopen.cae.optimization.Response
-
- STRESS2DVON_MISES - Static variable in class nxopen.cae.optimization.Response
-
- STRESS2DVON_MISES_BOTTOM - Static variable in class nxopen.cae.optimization.Response
-
- STRESS3DFIRST_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRESS3DSECOND_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRESS3DTHIRD_PRINCIPAL - Static variable in class nxopen.cae.optimization.Response
-
- STRESS3DVON_MISES - Static variable in class nxopen.cae.optimization.Response
-
- STRESS_CN_CM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: cN/cm^2
- STRESS_KGF_CM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: kgf/cm^2
- STRESS_KGF_M2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: kgf/m^2
- STRESS_KGF_MM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: kgf/mm^2
- STRESS_KPA - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: KPa
- STRESS_LBF_FT - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: lbf/ft^2
- STRESS_LEVEL_CROSSING_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- STRESS_LIFE - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum
-
- STRESS_LIFE - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum
-
Stress Life
- STRESS_LIFE - Static variable in class nxopen.uf.UFSf.DursolFatigueLifeCriterion
-
- STRESS_MAX_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on the maximum principal stress
- STRESS_MAX_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the maximum principal stress
- STRESS_MAX_S - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on the maximum shear stress
- STRESS_MAX_S - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the maximum shear stress
- STRESS_MIN_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on the minimum principal stress
- STRESS_MIN_P - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the minimum principal stress
- STRESS_MPA - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: MPa
- STRESS_NCM2 - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: N/cm^2
- STRESS_PA - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: Pa
- STRESS_PSI - Static variable in class nxopen.cae.XyFunctionUnit
-
Stress unit: Psi
- STRESS_RECOVERY_POINT_C - Static variable in class nxopen.cae.Result.Section
-
- STRESS_RECOVERY_POINT_D - Static variable in class nxopen.cae.Result.Section
-
- STRESS_RECOVERY_POINT_E - Static variable in class nxopen.cae.Result.Section
-
- STRESS_RECOVERY_POINT_F - Static variable in class nxopen.cae.Result.Section
-
- STRESS_STRAIN - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Stress/Strain Function
- STRESS_STRAIN - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Stress/Strain Function
- STRESS_STRAIN - Static variable in class nxopen.cae.XyFunctionMaterialType
-
Function is Stress/Strain Function
- STRESS_VON_MISES - Static variable in class nxopen.cae.optimization.Response
-
- STRESS_XX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Stress XX component
- STRESS_XX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the stress XX component
- STRESS_XY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Stress XY component
- STRESS_XY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the stress XY component
- STRESS_YY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Stress YY component
- STRESS_YY - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the stress YY component
- STRESS_YZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Stress YZ component
- STRESS_YZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the stress YZ component
- STRESS_ZX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Stress ZX component
- STRESS_ZX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the stress ZX component
- STRESS_ZZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.FilteringType
-
Filter values based on Stress ZZ component
- STRESS_ZZ - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.SortingType
-
Sort results using the stress ZZ component
- stressAxisDirectionSearchMethod() - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
Returns the stress axis direction search method.
- stressAxisMethod() - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
Returns the stress axis method.
- stressCriteriaType() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
Returns the stress criteria type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- stressCriterion() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
Returns the stress criterion.
- stressCriterion - Variable in class nxopen.uf.UFSf.AskDursolNxData
-
- stressDirection() - Method in interface nxopen.cae.DurabilityStressAxesBuilder
-
Returns the stress direction.
- stressF07(double, double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Stress F0.7
Computes the stress for secant modulus equal to 70% of Young's modulus.
- StressF07Data() - Constructor for class nxopen.cae.aerostructures.author.ABB.StressF07Data
-
- stressFromStrainInPlasticDomain(double, double, double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Compute stress from strain with the help of Ramberg-Osgood relationship
The Ramberg-Osgood relationship allows to describe stress-strain curve with the help of a dedicated material parameter ('n').
- StressFromStrainInPlasticDomainData() - Constructor for class nxopen.cae.aerostructures.author.ABB.StressFromStrainInPlasticDomainData
-
- stressOptionType() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
Returns the stress option type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- stressType() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
Returns the stress type.
- stressType() - Method in interface nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder
-
Returns the stress type
License requirements: None.
- stressType - Variable in class nxopen.uf.UFSf.AskDursolNxData
-
- STRETCH - Static variable in class nxopen.features.GlobalShapingBuilder.ModifyMethodType
-
By Surface stretch modify
- STRETCH - Static variable in class nxopen.features.OvercrownBuilder.OperationType
-
- STRETCH_TO_CURVE - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Stretch to curve
- STRETCH_TO_POINT - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Stretch to point
- stretchDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the stretch direction
License requirements: None.
- stretchDirection() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the stretch direction of deformation.
- STRETCHED - Static variable in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.SymbolType
-
- stretchNegative(double) - Method in interface nxopen.weld.WeldFillStripBuilder
-
Stretches the fill strip the input length opposite of the length direction.
- stretchPositive(double) - Method in interface nxopen.weld.WeldFillStripBuilder
-
Stretches the fill strip the input length in the length direction.
- STRIKE_POINT - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
- STRIKETHROUGH - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.DeletedHolesDisplayType
-
Strikethrough
- STRIKETHROUGH - Static variable in class nxopen.annotations.PartsListBuilder.PartsListShowLockedDeletedRows
-
- STRIKETHRU - Static variable in class nxopen.annotations.TabularNoteStyleBuilder.ShowLockedDeletedRowMethod
-
Strike thru
- strikethru - Variable in class nxopen.uf.UFDraw.TabnotCellParams
-
- strikethru - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- STRING - Static variable in class nxopen.ame.PlcDataType
-
- STRING - Static variable in class nxopen.AttributePropertiesBaseBuilder.DataTypeOptions
-
String, the value will be a textual string
- STRING - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- STRING - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
String
- STRING - Static variable in class nxopen.cae.PostScenarioVariantType
-
an ASCII character string
- STRING - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
BASE_PROPERTY_TABLE_property_type_string
- STRING - Static variable in class nxopen.cam.CAMAttribute.ValueType
-
- STRING - Static variable in class nxopen.cam.UdeParameter.ParameterTypes
-
- string() - Method in interface nxopen.diagramming.FormattedStringBuilder
-
Returns the string.
- STRING - Static variable in class nxopen.features.CustomAttribute.Type
-
String.
- STRING - Static variable in class nxopen.mechatronics.MATLABSignalConnectionBuilder.DataType
-
string
- STRING - Static variable in class nxopen.mechatronics.ParameterStockBuilder.DataType
-
String
- STRING - Static variable in class nxopen.mechatronics.SignalConnectionBuilder.DataType
-
string
- STRING - Static variable in class nxopen.NXObject.AttributeType
-
String
- STRING - Static variable in class nxopen.options.OptionType
-
Option value is an ascii string
- STRING - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
string attribute
- STRING - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
String
- STRING - Static variable in class nxopen.preferences.RoutingPartLibrary.ColumnType
-
String values.
- STRING - Static variable in class nxopen.PropertyContainer.PropertyType
-
String
- STRING - Static variable in class nxopen.report.BaseArgument.Type
-
Argument for string data
- STRING - Static variable in class nxopen.routing.RoutingAttributeIdentifierType
-
A simple string identifier
- STRING - Static variable in class nxopen.RuleManager.RuleType
-
- STRING - Static variable in class nxopen.SpreadsheetCellData.Types
-
- string - Variable in class nxopen.uf.UFCurve.OcfValues
-
- string - Variable in class nxopen.uf.UFDrf.DraftAidText
-
- string - Variable in class nxopen.uf.UFGdt.CalloutString
-
- STRING - Static variable in class nxopen.uf.UFKf.Type
-
- string - Variable in class nxopen.uf.UFModl.StringList
-
- STRING - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
String item
- STRING - Static variable in class nxopen.validate.RequirementBuilder.DataTypeOptions
-
- STRING - Static variable in class nxopen.visualreporting.Property.DatatypeOption
-
String data type
- STRING - Static variable in class nxopen.weld.CharacteristicsValueBuilder.Type
-
Indicates the attribute value contains a string.
- STRING - Static variable in class nxopen.weld.WeldAttribType
-
stringt
- STRING_ARRAY - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- STRING_ITEM - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- STRING_LIST - Static variable in class nxopen.options.OptionType
-
Option value is a list of ascii strings
- STRING_NOTE - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes
-
string note
- STRING_POINTER_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator
-
String pointer value
- STRING_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
string attribute
- STRING_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- STRING_VALUE - Static variable in class nxopen.uf.UFPd.AttributeValueType
-
- STRING_VALUE - Static variable in class nxopen.uistyler.StylerEvent.Indicator
-
String value
- STRING_VLA - Static variable in class nxopen.features.CustomAttribute.Type
-
String variable length array.
- StringArgument - Interface in nxopen.report
-
Represents an argument for string type data.
- StringArrayPreferenceData() - Constructor for class nxopen.preferences.RoutingUserPreferences.StringArrayPreferenceData
-
- StringBlock - Interface in nxopen.blockstyler
-
Represents a String block .
- stringData - Variable in class nxopen.uf.UFCurve.OcfData
-
- stringDatumFeatName() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string datum feat name
License requirements: None.
- stringDatumLetter() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string datum letter
License requirements: None.
- stringerHeight() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the stringer height
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- stringerWidth() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the stringer width
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- stringFeatureName1() - Method in interface nxopen.cam.InspectionOutputOperationBuilder
-
Returns the string feature name1
License requirements: None.
- stringFeatureName2() - Method in interface nxopen.cam.InspectionOutputOperationBuilder
-
Returns the string feature name2
License requirements: None.
- stringFilterRule() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the Filter rule
License requirements: None.
- StringItem - Interface in nxopen.uistyler
-
Represents a StringItem for UI Styler.
- StringItem.Activate - Interface in nxopen.uistyler
-
Called when a dialog user enters a character string and presses Return.
- stringLimit1() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the first angle limit
License requirements: None.
- stringLimit2() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Returns the second angle limit
License requirements: None.
- StringList - Interface in nxopen.cam
-
Represents a string list .
- StringList() - Constructor for class nxopen.uf.UFModl.StringList
-
- StringList(int, int[], int[], Tag[]) - Constructor for class nxopen.uf.UFModl.StringList
-
- stringNameRule() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the string name rule
License requirements: None.
- stringOriginFeatName() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string origin feat name
License requirements: None.
- StringParameterData() - Constructor for class nxopen.mechatronics.ParameterStockBuilder.StringParameterData
-
- StringPreferenceData() - Constructor for class nxopen.preferences.RoutingUserPreferences.StringPreferenceData
-
- stringPrefixI() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string prefix i
License requirements: None.
- stringPrefixJ() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string prefix j
License requirements: None.
- stringPrefixK() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string prefix k
License requirements: None.
- stringPrefixLabel() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string prefix label
License requirements: None.
- stringPrefixLevel() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string prefix level
License requirements: None.
- stringPrefixX() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string prefix x
License requirements: None.
- stringPrefixY() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string prefix y
License requirements: None.
- stringPrefixZ() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string prefix z
License requirements: None.
- stringPriDatum() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string primary datum
License requirements: None.
- stringPriDatum1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string primary datum1
License requirements: None.
- STRINGS - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Strings
- STRINGS - Static variable in class nxopen.PropertyContainer.PropertyType
-
Strings
- strings - Variable in class nxopen.uf.UFPd.AttributeValueString
-
- strings - Variable in class nxopen.uf.UFRoute.AskMultiportStringsData
-
- stringSecDatum() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string secondary datum
License requirements: None.
- stringSecDatum1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string secondary datum1
License requirements: None.
- stringSheetName() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the sheet name
License requirements: None.
- stringStock() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the stock size string, it is separated by " X ".
- stringSuffixI() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string suffix i
License requirements: None.
- stringSuffixJ() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string suffix j
License requirements: None.
- stringSuffixK() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string suffix k
License requirements: None.
- stringSuffixLabel() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string suffix label
License requirements: None.
- stringSuffixLevel() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string suffix level
License requirements: None.
- stringSuffixX() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string suffix x
License requirements: None.
- stringSuffixY() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string suffix y
License requirements: None.
- stringSuffixZ() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the string suffix z
License requirements: None.
- stringTag - Variable in class nxopen.uf.UFCurve.OcfStringData
-
- stringTerDatum() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string tertiary datum
License requirements: None.
- stringTerDatum1() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string tertiary datum1
License requirements: None.
- stringText() - Method in interface nxopen.cam.UdeParameter
-
Returns the string utf8 value of the parameter
License requirements: None.
- stringTol - Variable in class nxopen.uf.UFCurve.OcfData
-
- stringTolerancedFeat() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string toleranced feat
License requirements: None.
- stringTolName() - Method in interface nxopen.cam.InspectionOutputOperationBuilder
-
Returns the string tol name
License requirements: None.
- stringTolName() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the string tolerance name
License requirements: None.
- stringToReplace() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the string to replace
License requirements: None.
- stringToTruncate - Variable in class nxopen.uf.UFText.TruncateData
-
- stringValue() - Method in interface nxopen.annotations.CustomSymbolTextData
-
- stringValue() - Method in interface nxopen.annotations.PmiAttributeValueStringBuilder
-
Returns the string_value
License requirements: None.
- stringValue() - Method in interface nxopen.annotations.PmiStringBuilder
-
Returns the str value
License requirements: None.
- stringValue() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the string value.
- stringValue() - Method in interface nxopen.cam.UdeParameter
-
- stringValue() - Method in interface nxopen.Expression
-
Returns the string value of the expression.
- stringValue() - Method in interface nxopen.issue.IssueProperty
-
Returns the string value
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- stringValue - Variable in class nxopen.NXObject.AttributeInformation
-
String attribute value (the default value is returned when reading templates of non-set attributes).
- stringValue() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
Returns the string value.
- stringValue() - Method in interface nxopen.SpreadsheetCellData
-
Returns the string value stored in the cell.
- stringValue - Variable in class nxopen.uf.UFAttr.GetStringUserAttributeData
-
- stringValue - Variable in class nxopen.uf.UFPd.AttributeValue
-
- STRIP_FAMILY_STATUS - Static variable in class nxopen.uf.UFClone.FamilyTreatment
-
- STRIPED_SPIRAL - Static variable in class nxopen.mechanicalrouting.InsulationBuilder.WrapType
-
Striped Spiral
- STRIPED_SPIRAL - Static variable in class nxopen.routing.OverstockBuilder.WrapType
-
Striped Spiral
- stripLayout() - Method in interface nxopen.tooling.ToolingManager
-
Returns the StripLayout instance belonging to this part .
- StripLayoutBuilder - Interface in nxopen.tooling
-
- StripLayoutBuilder.FromStationType - Class in nxopen.tooling
-
Specifies the option of From Station for layout
- StripLayoutBuilder.ToStationType - Class in nxopen.tooling
-
Specifies the option of To Station for layout
- StripLayoutCollection - Interface in nxopen.tooling
-
Contains the create functions for builders.
- StripLayoutStationInformationBuilder - Interface in nxopen.tooling
-
Strip Layout Process Description Builder of Tooling.
- StripLayoutStationInformationBuilder.StationItem - Class in nxopen.tooling
-
Specifies the station items
- stripLength() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the strip length.
- stripMaterial() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the strip material.
- STRIPPER_PLATE - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BlankPositions
-
the blank is on the stripper plate
- STRIPPER_PLATE - Static variable in class nxopen.tooling.FormingInsertBuilder.BlankPositions
-
the blank is on the stripper plate
- stripperPlateClearance() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the clearance value of stripper plate.
- stripperPlateClearance() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the option to use the stripper plate clearance.
- stripperPlateClearance() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the stripper plate clearance.
- StripperVentingBuilder - Interface in nxopen.tooling
-
Stripper Venting Builder of PDW and EDW.
- strippingLength() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the stripping length.
- stripThickness() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the strip thickness.
- stripTravel() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the strip travel to calculate controller data.
- stripTravelDistance() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the strip travel distance value.
- stripVector() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the strip feeding direction
License requirements: None.
- stripWidthResult() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the strip width.
- strName - Variable in class nxopen.mechatronics.ProfinetClientBuilder.TagInfo
-
Signal Object
- strokeAngleStep() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the stroke angle step to calculate controller data.
- strokeColor() - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
Returns the stroke color.
- strokeInfo - Variable in class nxopen.uf.UFDrf.AskEmbeddedUdsFontInfoData
-
- StrokeInfo() - Constructor for class nxopen.uf.UFDrf.StrokeInfo
-
- StrokeInfo(UFDrf.UdSymbolPenType, int, int) - Constructor for class nxopen.uf.UFDrf.StrokeInfo
-
- strokeInfo - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo
-
- strokeLength() - Method in interface nxopen.mechatronics.HydraulicCylinderBuilder
-
Returns the overall stroke length of the cylinder.
- strokeLength() - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder
-
Returns the overall stroke length of the cylinder.
- strokeOpacity() - Method in interface nxopen.diagramming.RenderingPropertiesBuilder
-
Returns the stroke opacity.
- strokePerMinute() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the stroke per minute
License requirements: None.
- strokesPerMinute() - Method in interface nxopen.tooling.SetPressModelBuilder
-
Returns the strokes per minute of press model
License requirements: None.
- STRONG_AQUA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_BROWN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_CARROT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_COBALT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_CORAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_CORNFLOWER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_CRIMSON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_EMERALD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_FOREST_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_FUSHCIA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_GOLD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_ICE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_INDIGO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_KHAKI_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_LAVENDER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_LEAF_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_LEMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_LIME_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_MAROON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_MIDNIGHT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_MINT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_MOSS_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_OLIVE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_PEACH_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_PINE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_PISTACHIO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_PLUM_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_PURPLE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_ROYAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_SALMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_SEA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_SKY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_STEEL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_STONE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_TAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_TURQUOISE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_UMBER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- STRONG_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- strs - Variable in class nxopen.uf.UFSfLegend.Title
-
- strstatus - Variable in class nxopen.mechatronics.SHMSignalClientBuilder.SHMInstanceData
-
- STRUCT - Static variable in class nxopen.ame.InterfaceAccessType
-
- STRUCT - Static variable in class nxopen.ame.PlcDataType
-
- structIncomplete - Variable in class nxopen.BasePart.IncompleteStatus
-
Parts structure is incomplete
- STRUCTURAL - Static variable in class nxopen.cae.Post.Spectrum
-
- STRUCTURAL - Static variable in class nxopen.cae.SimResultReference.Type
-
structural result
- STRUCTURAL - Static variable in class nxopen.cae.SolidPropertyCheckBuilder.CoupledSolutionOutput
-
structural results
- STRUCTURAL - Static variable in class nxopen.motion.BeamForceBuilder.DampingTypes
-
Structural
- STRUCTURAL - Static variable in class nxopen.motion.SplineBeamPropertyBuilder.DampingTypes
-
Structural
- STRUCTURAL_ACOUSTIC_COUPLING_DISTANCE - Static variable in class nxopen.cae.Result.Quantity
-
- STRUCTURAL_ACOUSTIC_COUPLING_QUALITY - Static variable in class nxopen.cae.Result.Quantity
-
- STRUCTURAL_DAMPING - Static variable in class nxopen.cae.connections.ModelizationResultType
-
StructuralDamping
- STRUCTURAL_UNCOUPLED_ACOUSTIC_COUPLING_QUALITY - Static variable in class nxopen.cae.Result.Quantity
-
- structuralProperty() - Method in interface nxopen.motion.SplineBeamBuilder
-
Returns the structural property
License requirements: mechanisms ("MECHANISMS")
.
- STRUCTURE - Static variable in class nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder.ContainerType
-
Structure Container
- STRUCTURE - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
-
- STRUCTURE_FOR_REQUEST - Static variable in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType
-
- STRUCTURE_FOR_VERIFY - Static variable in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType
-
- STRUCTURE_SYSTEM - Static variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.Types
-
The structure system type.
- STRUCTURE_WELDING - Static variable in class nxopen.weld.WeldJointBuilder.Application
-
Structure Welding Application.
- structureOrderFunctionIndex() - Method in interface nxopen.ame.EplanProjectTemplateAndStructureBuilder
-
Returns the structure order index for function
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- structureOrderLocationIndex() - Method in interface nxopen.ame.EplanProjectTemplateAndStructureBuilder
-
Returns the structure order index for location
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- structurePartCollector() - Method in interface nxopen.features.shipdesign.VerifyPenetrationBuilder
-
Returns the selected parts
License requirements: None.
- structures() - Method in interface nxopen.ObjectTypeSelector
-
Returns the structures - This should be set to true if structures are desired in the output file
License requirements: None.
- structureToUpdate() - Method in interface nxopen.assemblies.UpdateStructureBuilder
-
Returns the component selection of the Assembly structure to Update.
- StructureWeldBuilder - Interface in nxopen.weld
-
This class is used to create or edit the information shared among all Structure Weld builders.
- stTraverse() - Method in interface nxopen.tooling.ProfileSplitBuilder
-
Start traverse function to get edge loop
License requirements: None.
- STUB - Static variable in class nxopen.annotations.LineComponent.LineType
-
stub line
- STUB_ACME - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Stub Acme
- STUB_ACME - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Stub Acme
- STUB_DOWN - Static variable in class nxopen.uf.UFGdt.StubDirection
-
- STUB_LEFT - Static variable in class nxopen.uf.UFGdt.StubDirection
-
- STUB_RIGHT - Static variable in class nxopen.uf.UFGdt.StubDirection
-
- STUB_UP - Static variable in class nxopen.uf.UFGdt.StubDirection
-
- STUBACME - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Stub Acme
- stubLen - Variable in class nxopen.uf.UFDraw.ArrowParms
-
- stubLength() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the stub length
License requirements: None.
- stubLength() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the stub length.
- stubLength() - Method in interface nxopen.diagramming.LeaderLineBuilder
-
Returns the stub length of this leader line.
- stubLength() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- stubLength - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- stubLength - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- stubPoints - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- stubSide() - Method in interface nxopen.annotations.LeaderData
-
Returns the stub side
License requirements: None.
- stubSides() - Method in interface nxopen.diagramming.LeaderLineBuilder
-
Returns the stub sides of this leader line.
- stubSize() - Method in interface nxopen.annotations.LeaderData
-
Returns the stub size
License requirements: None.
- stubSymbolType() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the stub symbol type
License requirements: None.
- StubSymbolType - Class in nxopen.annotations
-
Specifies on what type of symbol is attached to dimension stub
- stubType() - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Returns the stub type
License requirements: None.
- stubType - Variable in class nxopen.uf.UFDrf.ChamferDimensionData
-
- STUD - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- STUD - Static variable in class nxopen.annotations.Symbol
-
Specifies stud weld symbol (Arrow side only )
- STUD - Static variable in class nxopen.routing.ReuseLibrary.PartType
-
Stud Post Placement Type
- stud - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionPostPlacementData
-
Whether or not to place Studs for this connection.
- stud - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData
-
Report Studs
- STUD_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- STUDIO - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a shape studio file new template
- STUDIO - Static variable in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
-
Deprecated.
In Studio mode, objects are realistically
rendered according to material and texture
characteristics assigned to them
- STUDIO - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
-
- studio() - Method in interface nxopen.UFSession
-
- STUDIO - Static variable in class nxopen.View.RenderingStyleType
-
- STUDIO_IMAGE_FILE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- STUDIO_SHADED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.ViewMode
-
The view is studio shaded
- STUDIO_SPLINE - Static variable in class nxopen.preferences.SessionModeling.SplineDefaultActionTypes
-
Specifies Studio Spline for editing a spline
- STUDIO_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle
-
- StudioImageCaptureBuilder - Interface in nxopen.display
-
Represents a
StudioImageCaptureBuilder
This class is restricted to being called from a program running during an
Interactive NX session.
- StudioImageCaptureBuilder.AASamplesEnumType - Class in nxopen.display
-
Provide the following anti-aliasing sample size for off screen image capture
- StudioImageCaptureBuilder.DPIEnumType - Class in nxopen.display
-
Provide the following screen capture resolutions in dots per inch
- StudioImageCaptureBuilder.DrawingSizeEnumType - Class in nxopen.display
-
Provide the following standard Drawing sizes
- StudioImageCaptureBuilder.OrientEnumType - Class in nxopen.display
-
Provide the following options to image orientation
- StudioImageCaptureBuilder.UnitsEnumType - Class in nxopen.display
-
Provide the following resolution unit options to screen capture
- studioMaterialEditorEditingMode() - Method in interface nxopen.preferences.SessionVisualizationHighEndRendering
-
Returns the Studio Material Editor editing mode
License requirements: None.
- StudioSpline - Interface in nxopen.features
-
Represents a studio spline feature
To create or edit an instance of this class, use
StudioSplineBuilderEx
Created in NX5.0.0
- StudioSplineBuilder - Interface in nxopen.features
-
- StudioSplineBuilder.CurveOption - Class in nxopen.features
-
Deprecated.
Options of the actions to be taken on an input non-parametric spline
after its editing is done.
- StudioSplineBuilder.MatchKnotsType - Class in nxopen.features
-
Deprecated.
Options for creating knots at the defining points in case of through point spline
- StudioSplineBuilder.Method - Class in nxopen.features
-
Deprecated.
Spline methods.
- StudioSplineBuilderEx - Interface in nxopen.features
-
Studio Spline builder class.
- StudioSplineBuilderEx.DrawingPlaneOptions - Class in nxopen.features
-
Drawing plane options
- StudioSplineBuilderEx.InputCurveOptions - Class in nxopen.features
-
Options of the actions to be taken on an input non-parametric spline
after its editing is done.
- StudioSplineBuilderEx.MatchKnotsTypes - Class in nxopen.features
-
Options for creating knots at the defining points in case of through point spline
- StudioSplineBuilderEx.MovementMethodType - Class in nxopen.features
-
Points movement types
- StudioSplineBuilderEx.Types - Class in nxopen.features
-
Spline methods.
- StudioSplineBuilderEx.WCSOptionType - Class in nxopen.features
-
WCS principal axis or plane types
- StudioSurface - Interface in nxopen.features
-
Represents a studio surface feature
To create or edit an instance of this class, use
StudioSurfaceBuilder
Created in NX5.0.0
- StudioSurfaceBuilder - Interface in nxopen.features
-
- StudioSurfaceBuilder.TransitionOptions - Class in nxopen.features
-
the transition control options when using By Points alignment
method
- StudioSurfaceBuilderEx - Interface in nxopen.features
-
- StudioSurfaceBuilderEx.TransitionOptions - Class in nxopen.features
-
the transition control options when using By Points alignment
method
- StudioSurfaceEx - Interface in nxopen.features
-
Represents a new studio surface feature
To create or edit an instance of this class, use
StudioSurfaceBuilderEx
Created in NX8.5.0
- StudioXform - Interface in nxopen.features
-
Represents a studio xform feature
To create or edit an instance of this class, use
StudioXformBuilderEx
Created in NX6.0.0
- StudioXformBuilder - Interface in nxopen.features
-
- StudioXformBuilder.AdvancedMethodType - Class in nxopen.features
-
Deprecated.
Represents the advanced method type
- StudioXformBuilder.FeatureType - Class in nxopen.features
-
Deprecated.
Represents the feature type
- StudioXformBuilder.InsertKnotDirectionType - Class in nxopen.features
-
Deprecated.
Represents the insert knot direction type
- StudioXformBuilder.PlanarizeDirectionType - Class in nxopen.features
-
Deprecated.
Represents the planarize direction type
- StudioXformBuilder.PlanarizeMethodType - Class in nxopen.features
-
Deprecated.
Represents the planarize method type
- StudioXformBuilder.PlanarizePlaneOptionType - Class in nxopen.features
-
Deprecated.
Represents the plane option type
- StudioXformBuilder.RotatingPivotType - Class in nxopen.features
-
Deprecated.
Represents the rotating pivot type
- StudioXformBuilder.RotationDirectionType - Class in nxopen.features
-
Deprecated.
Represents the rotation direction type
- StudioXformBuilder.ScalingCenterType - Class in nxopen.features
-
Deprecated.
Represents the scaling center type
- StudioXformBuilder.ScalingDirectionType - Class in nxopen.features
-
Deprecated.
Represents the scaling direction type
- StudioXformBuilder.TranslationDirectionType - Class in nxopen.features
-
Deprecated.
Represents the translation direction type
- StudioXformBuilder.Types - Class in nxopen.features
-
Deprecated.
Represents the Xform type
- StudioXformBuilderEx - Interface in nxopen.features
-
- StudioXformBuilderEx.AdvancedMethodOptionType - Class in nxopen.features
-
Represents the advanced method option type
- StudioXformBuilderEx.AdvancedMethodType - Class in nxopen.features
-
- StudioXformBuilderEx.ExtrationMethodType - Class in nxopen.features
-
B-surface extraction method
- StudioXformBuilderEx.FeatureType - Class in nxopen.features
-
Represents the feature type
- StudioXformBuilderEx.InsertKnotDirectionType - Class in nxopen.features
-
Represents the insert knot direction type
- StudioXformBuilderEx.InsertPoleType - Class in nxopen.features
-
Represents the insert pole type
- StudioXformBuilderEx.MovementMethodType - Class in nxopen.features
-
Represents the Xform movement type
- StudioXformBuilderEx.PlanarizeDirectionType - Class in nxopen.features
-
Represents the planarize direction type
- StudioXformBuilderEx.PlanarizeMethodType - Class in nxopen.features
-
Represents the planarize method type
- StudioXformBuilderEx.PlanarizeProjectionPlaneType - Class in nxopen.features
-
Represents the planarize projection plane type
- StudioXformBuilderEx.PoleEditType - Class in nxopen.features
-
Editing types of a pole of spline belonging to a Studio Spline feature
- StudioXformBuilderEx.PrincipalMovementDirectionType - Class in nxopen.features
-
Represents the principal movement direction type
- StudioXformBuilderEx.PrincipalRotatingAxisType - Class in nxopen.features
-
Represents the principal rotation axis type
- StudioXformBuilderEx.PrincipalScalingDirectionType - Class in nxopen.features
-
Represents the principal scaling direction type
- StudioXformBuilderEx.ProportionalPoleControlType - Class in nxopen.features
-
Represents the pole control type in proportional method
- StudioXformBuilderEx.RotatingAxisType - Class in nxopen.features
-
Represents the rotation axis type
- StudioXformBuilderEx.RotatingPivotType - Class in nxopen.features
-
Represents the rotating pivot type
- StudioXformBuilderEx.ScalingCenterType - Class in nxopen.features
-
Represents the scaling center type
- StudioXformBuilderEx.ScalingDirectionType - Class in nxopen.features
-
Represents the scaling direction type
- StudioXformBuilderEx.SurfaceDirectionType - Class in nxopen.features
-
Represents the U or V direction of a B-Surface
- StudioXformBuilderEx.Types - Class in nxopen.features
-
Represents the Xform editing type
- studyName() - Method in interface nxopen.optimization.DesignStudyBuilder
-
Returns the study name which is unique in one part
License requirements: None.
- studyName() - Method in interface nxopen.optimization.OptimizationBuilder
-
Returns the study name which is unique in one part
License requirements: None.
- STYBLD_CONT_CURVATURE - Static variable in class nxopen.uf.UFStudio.StybldCont
-
- STYBLD_CONT_G3 - Static variable in class nxopen.uf.UFStudio.StybldCont
-
- STYBLD_CONT_POSITION - Static variable in class nxopen.uf.UFStudio.StybldCont
-
- STYBLD_CONT_TANGENT - Static variable in class nxopen.uf.UFStudio.StybldCont
-
- STYBLD_DIRECT_ISO_U - Static variable in class nxopen.uf.UFStudio.StybldDirect
-
- STYBLD_DIRECT_ISO_V - Static variable in class nxopen.uf.UFStudio.StybldDirect
-
- STYBLD_DIRECT_NO_SPECIFIC - Static variable in class nxopen.uf.UFStudio.StybldDirect
-
- STYBLD_DIRECT_PERPENDICULAR - Static variable in class nxopen.uf.UFStudio.StybldDirect
-
- STYBLD_METHOD_CURVES - Static variable in class nxopen.uf.UFStudio.StybldMethod
-
- STYBLD_METHOD_LAW - Static variable in class nxopen.uf.UFStudio.StybldMethod
-
- STYBLD_METHOD_PROFILE - Static variable in class nxopen.uf.UFStudio.StybldMethod
-
- STYBLD_MINRAD_BOUND - Static variable in class nxopen.uf.UFStudio.StybldMinrad
-
- STYBLD_MINRAD_NONE - Static variable in class nxopen.uf.UFStudio.StybldMinrad
-
- STYBLD_MINRAD_PEAK - Static variable in class nxopen.uf.UFStudio.StybldMinrad
-
- STYBLD_STIFF_AUTO - Static variable in class nxopen.uf.UFStudio.StybldStiff
-
- STYBLD_STIFF_LOW - Static variable in class nxopen.uf.UFStudio.StybldStiff
-
- STYBLD_TRANS_CONSTANT - Static variable in class nxopen.uf.UFStudio.StybldTrans
-
- STYBLD_TRANS_LINEAR - Static variable in class nxopen.uf.UFStudio.StybldTrans
-
- STYBLD_TRANS_NON_INFLECTING - Static variable in class nxopen.uf.UFStudio.StybldTrans
-
- STYBLD_TRANS_SSHAPED - Static variable in class nxopen.uf.UFStudio.StybldTrans
-
- STYBLD_TRIM_ATTACH_ALL - Static variable in class nxopen.uf.UFStudio.StybldTrim
-
- STYBLD_TRIM_INPUT_BLENDS - Static variable in class nxopen.uf.UFStudio.StybldTrim
-
- STYBLD_TRIM_INPUT_WALLS - Static variable in class nxopen.uf.UFStudio.StybldTrim
-
- STYBLD_TRIM_NO - Static variable in class nxopen.uf.UFStudio.StybldTrim
-
- STYBLD_VDEGREE_CUBIC - Static variable in class nxopen.uf.UFStudio.StybldVDegree
-
- STYBLD_VDEGREE_QUINTIC - Static variable in class nxopen.uf.UFStudio.StybldVDegree
-
- StybldCurveTrans() - Constructor for class nxopen.uf.UFStudio.StybldCurveTrans
-
- StybldCurveTrans(UFStudio.StybldTrans, String, String, String, double, double) - Constructor for class nxopen.uf.UFStudio.StybldCurveTrans
-
- StybldShapeTrans() - Constructor for class nxopen.uf.UFStudio.StybldShapeTrans
-
- StybldShapeTrans(UFStudio.StybldTrans, double, double, double, double, double) - Constructor for class nxopen.uf.UFStudio.StybldShapeTrans
-
- StycornerCrvOpt() - Constructor for class nxopen.uf.UFModl.StycornerCrvOpt
-
- StycornerCrvOpt(int, double, double, double, double) - Constructor for class nxopen.uf.UFModl.StycornerCrvOpt
-
- StycornerData() - Constructor for class nxopen.uf.UFModl.StycornerData
-
- StycornerData(Tag[], int, Tag[], double[], int, int[], int, double, double, boolean, UFModl.StycornerCrvOpt[], int[], double[], double[]) - Constructor for class nxopen.uf.UFModl.StycornerData
-
- style() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.BaseChamferDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.BaseCurveLengthDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the style builder
License requirements: None.
- style() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.BaseRapidDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.BaseThicknessDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.BendTableBuilder
-
Returns the bend table style
License requirements: drafting ("DRAFTING")
.
- style() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the Cutting Plane Symbol Style
License requirements: None.
- style() - Method in interface nxopen.annotations.DatumFeatureSymbolBuilder
-
Returns the datum feature style
License requirements: None.
- style() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.DraftingNoteBuilder
-
Returns the style builder
License requirements: None.
- style() - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.GeodesicDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.HoleTableBuilder
-
Returns the hole table style
License requirements: None.
- style() - Method in interface nxopen.annotations.IdSymbolBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the
StyleBuilder
for the weld symbol
License requirements: None.
- style() - Method in interface nxopen.annotations.PmiAttributeBuilder
-
Returns the
StyleBuilder
for the annotation
License requirements: None.
- style() - Method in interface nxopen.annotations.ShipDimensionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.annotations.TableSectionBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.drawings.BaseViewBuilder
-
Returns the view style
License requirements: None.
- style() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.drawings.DraftingView
-
Returns object to View Style .
- style() - Method in interface nxopen.drawings.ProjectedViewBuilder
-
Returns the view style
License requirements: None.
- style() - Method in interface nxopen.drawings.SectionLineBuilder
-
- style() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the section line arrowhead style
License requirements: None.
- style() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Returns the style
License requirements: routing_harness ("Routing Harness")
.
- style() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the style
License requirements: None.
- style() - Method in interface nxopen.HumanHandsDialogBuilder
-
Returns the style
License requirements: ug_human ("Human Modelling")
.
- style() - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
Returns the style of OSC
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
- style() - Method in interface nxopen.pid.PreferencesOffSheetConnectorBuilder
-
Returns the style of OSC
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
- style() - Method in interface nxopen.routing.CrossSection
-
Returns the style of the profile.
- style() - Method in interface nxopen.weld.WeldLabelBuilder
-
Returns the
StyleBuilder
for the annotation
License requirements: None.
- style() - Method in interface nxopen.weld.WeldPmiBuilder
-
- StyleBuilder - Interface in nxopen.annotations
-
- styleCount() - Method in interface nxopen.cae.xyplot.DiagramDisplayStyles
-
Returns the style count
License requirements: None.
- StyledBlend - Interface in nxopen.features
-
Represents a styled blend feature
To create or edit an instance of this class, use
StyledBlendBuilder
Created in NX6.0.0
- StyledBlendBuilder - Interface in nxopen.features
-
- StyledBlendBuilder.StyledBlendRadiusConstraintType - Class in nxopen.features
-
The radius constraint type
- StyledBlendBuilder.StyledBlendShapeControlType - Class in nxopen.features
-
The shape control types
- StyledBlendBuilder.StyledBlendTrimMethodType - Class in nxopen.features
-
The trim method types
- StyledBlendBuilder.Types - Class in nxopen.features
-
The styled blend types
- StyledCorner - Interface in nxopen.features
-
Represents a styled corner feature
To create or edit an instance of this class, use
StyledCornerBuilder
Created in NX6.0.0
- StyledCornerBuilder - Interface in nxopen.features
-
- StyledCornerBuilder.CurveControlTypes - Class in nxopen.features
-
Curve control types
- StyledCornerBuilder.InteriorCurveTypes - Class in nxopen.features
-
Intertior curve type
- StyledCornerBuilder.ShapeControlMethodsTypes - Class in nxopen.features
-
Shape control types
- StyledCornerBuilder.TrimAndSewMethodTypes - Class in nxopen.features
-
Trim and attach method types
- StyledCornerBuilder.TrimCurveTypes - Class in nxopen.features
-
Trim curve types
- StyledSweep - Interface in nxopen.features
-
Represents a styled sweep feature
To create or edit an instance of this class, use
StyledSweepBuilder
Created in NX6.0.0
- StyledSweepBuilder - Interface in nxopen.features
-
- StyledSweepBuilder.FixedStringOptions - Class in nxopen.features
-
This enum represents the Fixed String option
- StyledSweepBuilder.ScalingMethodOptions - Class in nxopen.features
-
This enum represents the Scaling Method option
- StyledSweepBuilder.SectionOrientationOptions - Class in nxopen.features
-
This enum represents the Section Orientation option
- StyledSweepBuilder.TransitionOptions - Class in nxopen.features
-
This enum represents the Transition option
- StyledSweepBuilder.Types - Class in nxopen.features
-
This enum represents the sweep type option (Number of Guides)
- StyledSweepDoubleOnPathDimBuilder - Interface in nxopen.geometricutilities
-
- StyledSweepDoubleOnPathDimBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- StyledSweepReferenceMethodBuilder - Interface in nxopen.geometricutilities
-
- StyledSweepReferenceMethodBuilder.ReferenceOptions - Class in nxopen.geometricutilities
-
This enum represents the orientation reference option.
- styler() - Method in interface nxopen.UFSession
-
- styler() - Method in interface nxopen.UI
-
the Uistyler for the current session.
- Styler - Interface in nxopen.uistyler
-
Represents a Uistyler for UI Styler
To obtain an instance of this class, refer to
UI
Created in NX5.0.0
- StylerEvent - Interface in nxopen.uistyler
-
Represents a StylerEvent .
- StylerEvent.Indicator - Class in nxopen.uistyler
-
Describes indicator value
- StylerEvent.Miscellaneous - Class in nxopen.uistyler
-
Describes event index
- StylerEvent.Reason - Class in nxopen.uistyler
-
Describes callback reason
- StylerItem - Interface in nxopen.uistyler
-
Represents a Styler Item .
- StylerItem.ItemType - Class in nxopen.uistyler
-
Describes kind of action to be taken from callbac.
- styles - Variable in class nxopen.uf.UFUgfont.AskFontStylesData
-
- SUB - Static variable in class nxopen.tooling.BendInsertDesignBuilder.ParentOption
-
sub parent
- sub(double[], double[]) - Method in interface nxopen.uf.UFVec2
-
- sub(double[], double[]) - Method in interface nxopen.uf.UFVec3
-
- SUB_DIE - Static variable in class nxopen.tooling.BurringInsertBuilder.ParentTypes
-
use PDW project's sub-die base as parent part
- SUB_DIE - Static variable in class nxopen.tooling.FormingInsertBuilder.ParentTypes
-
use PDW project's sub-die base as parent part
- SUB_FIRST - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt
-
use PDW project's sub-die base as parent part
- SUB_NODE - Static variable in class nxopen.blockstyler.Wizard.TaskNavigatorItem
-
- SUB_PART - Static variable in class nxopen.visualreporting.VisualReport.ScopeTypeOption
-
The report is sub-part object report
- SUB_RANGE - Static variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.RangeType
-
The load history is restricted to a range
- SUB_SECOND - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt
-
use PDW project's sub-die base as parent part
- subAssembly() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the sub-assembly, to specify if sub-assembly needs to be searched
License requirements: None.
- subcase() - Method in interface nxopen.cae.DurabilityRandomEventBuilder
-
Returns the subcase index.
- subcase() - Method in interface nxopen.cae.DurabilityTransientEventBuilder
-
Returns the subcase index.
- SubcaseData() - Constructor for class nxopen.cae.optimization.TBSLoadCase.SubcaseData
-
- subcaseid - Variable in class nxopen.cae.optimization.TBSLoadCase.SubcaseData
-
- SUBCASES - Static variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.FindInType
-
Search in subcases
- subComponent() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the get subcomponent
License requirements: None.
- subDimensions - Variable in class nxopen.uf.UFDrf.AskDimensionsOfSetData
-
- subDir - Variable in class nxopen.uf.UFAssem.AskSearchDirectoriesData
-
- subdiv() - Method in interface nxopen.UFSession
-
- subdivide() - Method in interface nxopen.features.subdivision.SubdivisionSubdivideFaceBuilder
-
Perform subdivide operation.
- subdivide(ISegment, SegmentManager.SubdivideOption) - Method in interface nxopen.routing.SegmentManager
-
Subdivide a routing path segment
License requirements: routing_base ("Routing Basic")
.
- SUBDIVIDE_INTO_FOUR - Static variable in class nxopen.facet.SubdivideFacetBodyBuilder.SubdivisionMethodType
-
Subdivides the polygons into four sub triangles.
- SUBDIVIDE_LOOP - Static variable in class nxopen.features.RapidSurfaceBuilder.OperationTypes
-
subdivide loop
- SUBDIVIDE_SEG - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- SUBDIVIDE_SEGMENT - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Subdivide Segment command.
- subdivideArcLength() - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
- SUBDIVIDEBY_EDGE_LENGTH - Static variable in class nxopen.facet.SubdivideFacetBodyBuilder.SubdivisionMethodType
-
Subdivides the polygons to a specified edge length.
- subdivideEndPercentage() - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
- SubdivideFacetBodyBuilder - Interface in nxopen.facet
-
This class provides functionality to subdivide the polygons to increase the density of the facet bodies.
- SubdivideFacetBodyBuilder.InterpolationMethodType - Class in nxopen.facet
-
Subdivision interpolation methods
- SubdivideFacetBodyBuilder.SubdivisionMethodType - Class in nxopen.facet
-
Subdivision methods
- subdivideNumSegments() - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
- SubdivideOption() - Constructor for class nxopen.routing.SegmentManager.SubdivideOption
-
- SubdivideOption(SegmentManager.SubdivideSpacing, double, double, double, int, int, double, double, double, boolean, boolean, boolean) - Constructor for class nxopen.routing.SegmentManager.SubdivideOption
-
Constructor for the SubdivideOption object.
- subdividePoint() - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
- subdivideRegion() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the indication if the fill is to be a collection of rectangles (true), or
simply the enclosed boundary area (false).
- SubdivideSegmentBuilder - Interface in nxopen.routing
-
- SubdivideSegmentBuilder.EqualSegmentsMethod - Class in nxopen.routing
-
Options for subdivision with Equal Segments spacing method.
- SubdivideSegmentBuilder.SplineSettingsData - Class in nxopen.routing
-
- SubdivideSegmentBuilder.SplineSettingValuesData - Class in nxopen.routing
-
- SubdivideSegmentBuilder.Types - Class in nxopen.routing
-
Spacing method to use for subdivision.
- subdivideStartPercentage() - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
- SUBDIVISION - Static variable in class nxopen.cae.ShipMeshAutomationBuilder.MeshingMethodType
-
Subdivision
- subdivisionBodies() - Method in interface nxopen.Part
-
Returns the SubdivisionBodyCollection instance belonging to this part .
- subdivisionBodiesToMerge() - Method in interface nxopen.features.subdivision.MergeSubdivisionBodiesBuilder
-
- subdivisionBodiesToSplit() - Method in interface nxopen.features.subdivision.SplitSubdivisionBodyBuilder
-
- SubdivisionBody - Interface in nxopen.features.subdivision
-
Represents a subdivision body feature.
- SubdivisionBodyCollection - Interface in nxopen.features.subdivision
-
Represents a collection of subdivision body feature tools.
- SubdivisionBridgeFaceBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionBridgeFaceBuilder.ContinuityType - Class in nxopen.features.subdivision
-
Type of continuity.
- SubdivisionConnectCageBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionConnectCageBuilder.ContinuityTypes - Class in nxopen.features.subdivision
-
Represents the continuity type
- SubdivisionDeleteCageBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionDeleteFaceBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionDeleteObjectBuilder - Interface in nxopen.features.subdivision
-
- subdivisionDepth - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- SubdivisionExtrudeCageBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionExtrudeCageBuilder.ContinuityType - Class in nxopen.features.subdivision
-
Type of continuity.
- SubdivisionExtrudeCageBuilder.DirectionType - Class in nxopen.features.subdivision
-
Represents the extrude direction.
- SubdivisionExtrudeCageBuilder.ScalingMethodType - Class in nxopen.features.subdivision
-
Scaling method
- SubdivisionExtrudeCageBuilder.TransformationMethodType - Class in nxopen.features.subdivision
-
Transformation method types
- SubdivisionFillBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionFillBuilder.ContinuityType - Class in nxopen.features.subdivision
-
Type of continuity.
- SubdivisionLoftBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionLoftBuilder.ContinuityType - Class in nxopen.features.subdivision
-
Type of continuity.
- SubdivisionMergeFaceBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionMeshBody - Interface in nxopen
-
Represents a subdivision mesh.
- SubdivisionMeshEdge - Interface in nxopen
-
Represents a subdivision mesh edge.
- SubdivisionMeshEdge.VerticesData - Class in nxopen
-
- SubdivisionMeshFace - Interface in nxopen
-
Represents a subdivision mesh face.
- SubdivisionMeshVertex - Interface in nxopen
-
Represents a subdivision mesh vertex.
- subdivisionMethod() - Method in interface nxopen.facet.SubdivideFacetBodyBuilder
-
Returns the subdivision method
License requirements: None.
- subdivisionModeling() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Subdivision Modeling preferences settings applicable to entire session .
- SubdivisionModelingPreferences - Interface in nxopen.preferences
-
Represents the set of Modeling preferences applicable to entire session
To obtain an instance of this class, refer to
SessionPreferences
Created in NX9.0.0
- SubdivisionModelingPreferences.CagePolylineVertexSizes - Class in nxopen.preferences
-
Cage polyline vertex size type.
- SubdivisionModelingPreferences.CagePolylineVertexStyles - Class in nxopen.preferences
-
Cage polyline vertex style.
- SubdivisionModelingPreferences.DisplayModes - Class in nxopen.preferences
-
Display modes of subdivision cage and resulting body.
- SubdivisionModelingPreferences.VertexSizeTypes - Class in nxopen.preferences
-
Vertex size type.
- SubdivisionModelingPreferences.VertexStyleTypes - Class in nxopen.preferences
-
Vertex display style.
- SubdivisionPrimitiveShapeBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionPrimitiveShapeBuilder.Types - Class in nxopen.features.subdivision
-
Deprecated.
Type of primitive.
- SubdivisionPrimitiveShapeBuilderEx - Interface in nxopen.features.subdivision
-
- SubdivisionPrimitiveShapeBuilderEx.SphereSubdivisionLevel - Class in nxopen.features.subdivision
-
Level of subdivisions of cubical cage to construct spherical primitive.
- SubdivisionPrimitiveShapeBuilderEx.Types - Class in nxopen.features.subdivision
-
Type of primitive.
- SubdivisionProjectCageBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionProjectCageBuilder.ModeOptions - Class in nxopen.features.subdivision
-
Best fit mode
- SubdivisionProjectCageBuilder.TargetTypes - Class in nxopen.features.subdivision
-
Target types
- SubdivisionProjectCageBuilder.Types - Class in nxopen.features.subdivision
-
The type of projection
- SubdivisionRevolveBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionRevolveBuilder.ContinuityType - Class in nxopen.features.subdivision
-
Type of continuity.
- SubdivisionSetContinuityBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionSetContinuityBuilder.ContinuityTypes - Class in nxopen.features.subdivision
-
Represents the continuity type
- SubdivisionSetWeightBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionSewCageBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionSplitFaceBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionSplitFaceBuilder.Types - Class in nxopen.features.subdivision
-
Represents the split type.
- SubdivisionSubdivideFaceBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionSweepBuilder - Interface in nxopen.features.subdivision
-
- SubdivisionSweepBuilder.ContinuityType - Class in nxopen.features.subdivision
-
Type of continuity.
- subdivisionTaskEnvironment() - Method in interface nxopen.Session
-
- SubdivisionTaskEnvironment - Interface in nxopen
-
Represents the subdivision task environment associated with a session.
- SubdivisionTubeBuilder - Interface in nxopen.features.subdivision
-
- subdivStructurePointer - Variable in class nxopen.uf.UFSubdiv.AskParmsData
-
- subdivType - Variable in class nxopen.uf.UFSubdiv.AskParmsData
-
- subdivType1 - Variable in class nxopen.uf.UFSubdiv.DataStructuresUnion
-
- subent - Variable in class nxopen.uf.UFModeling.AskExtremeData
-
- subFeat1Filter() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the filter toggle for the first list of subfeatures
License requirements: None.
- subFeat1Name() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the name of the first subfeature
License requirements: None.
- subFeat1Select() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the first subfeature selection button
License requirements: None.
- subFeat1StateEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the state of features in the first subfeature list
License requirements: None.
- subFeat2Filter() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the filter toggle for the second list of subfeatures
License requirements: None.
- subFeat2Name() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the name of the first subfeature
License requirements: None.
- subFeat2Select() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the second subfeature selection button
License requirements: None.
- subFeat2StateEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the state of features in the second subfeature list
License requirements: None.
- subfeats - Variable in class nxopen.uf.UFModl.AskLinkedExteriorData
-
- subFeatures - Variable in class nxopen.uf.UFGdt.AskSubFeaturesData
-
- subFileId - Variable in class nxopen.uf.UFTag.DecomposeHandleData
-
- subGraphCountInStack() - Method in interface nxopen.cae.xyplot.Plot
-
Returns the sub-graph count in a stacked plot.
- subGraphInStack() - Method in interface nxopen.cae.xyplot.OverlayParameters
-
Returns the index of subgraph on a stacked plot, on which the records will be
overlaied.
- subId - Variable in class nxopen.cae.ElemEdgefaceObject
-
object sub_component identifier
- subId - Variable in class nxopen.cae.SetObject
-
object sub_component identifier
- SubInsertBuilder - Interface in nxopen.tooling
-
- SubInsertBuilder.Shape - Class in nxopen.tooling
-
Represents the foot shape
- SubInsertBuilder.Types - Class in nxopen.tooling
-
Represents the type of parent part
- SubInsertCollection - Interface in nxopen.tooling
-
Creates SubInsert builder collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- subInserts() - Method in interface nxopen.tooling.ToolingManager
-
Returns the SubInsertCollection instance belonging to this part .
- subiters - Variable in class nxopen.cae.ResultManager.IterationsWithLimitsData
-
Sub Iterations for the primary independent domain variable
- subListObj - Variable in class nxopen.uf.UFKf.AskValueOfListItemData
-
- SUBMARINE - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.ShipType
-
- submechanism() - Method in interface nxopen.motion.SubmechanismPositionerBuilder
-
Returns the submechanism to position.
- SubmechanismPositioner - Interface in nxopen.motion
-
Represents a Submechanism Positioner object.
- SubmechanismPositionerBuilder - Interface in nxopen.motion
-
- SubmechanismPositionerCollection - Interface in nxopen.motion
-
Represents a collection of Submechanmism Positioner objects
To obtain an instance of this class, refer to
MotionManager
Created in NX12.0.0
- submechanismPositioners() - Method in interface nxopen.motion.MotionManager
-
- SUBMENU - Static variable in class nxopen.menubar.ContextMenuEntry.Type
-
Has an attached menu structure containing more entries.
- submitEngObjectDelete() - Method in interface nxopen.ame.AMEManager
-
Submit the delete of EOs
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- submitOptions() - Method in interface nxopen.cae.DurabilityEventSolverBuilder
-
Returns the submit options.
- submitOptions() - Method in interface nxopen.cae.DurabilitySolverBuilder
-
Returns the submit options.
- submitQueryObjectDelete() - Method in interface nxopen.ame.AMEManager
-
Submit the delete of Query Objects
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SubnetBuilder - Interface in nxopen.ame
-
- subopLabel() - Method in interface nxopen.cam.MoveBuilder
-
Returns the subop label
License requirements: None.
- subopTag - Variable in class nxopen.uf.UFTurn.TeachmodeCreateSubopData
-
- SUBORDINATE - Static variable in class nxopen.assemblies.CollaborativeContentType
-
Subordinate Design Element in a Workset
- SUBORDINATE_DESIGN_ELEMENT - Static variable in class nxopen.issue.IssueAttachment.Type
-
Subordinate Design Element type
- subPillarDefinitionList() - Method in interface nxopen.features.shipdesign.SubSystemsBuilder
-
Returns the list of Sub Pillar System Definitions.
- subPlateDefinitionList() - Method in interface nxopen.features.shipdesign.SubSystemsBuilder
-
Returns the list of Sub Plate System Definitions.
- subProfileDefinitionList() - Method in interface nxopen.features.shipdesign.SubSystemsBuilder
-
Returns the list of Sub Profile System Definitions.
- subRegion() - Method in interface nxopen.preferences.SessionVisualizationHighQualityImage
-
Returns the setting for whether the High Quality Image is generated from a sub-region.
- subscript() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
Returns the subscript
License requirements: None.
- SUBSCRIPT - Static variable in class nxopen.drawings.ViewCommonViewLabelBuilder.SecondaryAlignmentType
-
- subscriptSizeFactor() - Method in interface nxopen.drawings.ViewCommonViewLabelBuilder
-
Returns the subscript size factor
License requirements: None.
- subscriptSizeFactor - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- SUBSET - Static variable in class nxopen.assemblies.CollaborativeContentType
-
Subset
- subset() - Method in interface nxopen.assemblies.Component
-
Returns the
Subset
that corresponds to this component.
- Subset - Interface in nxopen.assemblies
-
A subset is a set of design elements within a collaborative design.
- subset() - Method in interface nxopen.assemblies.SubsetBuilder
-
- SUBSET - Static variable in class nxopen.BasePart.CollaborativeContentType
-
Subset
- SUBSET - Static variable in class nxopen.features.shipdesign.PenetrationUtils.Referencetype
-
- SUBSET - Static variable in class nxopen.issue.IssueAttachment.Type
-
Subset type
- Subset.ContentType - Class in nxopen.assemblies
-
Represents the content type for a subset.
- Subset.PartitionViewStyleType - Class in nxopen.assemblies
-
Represents the type of partition view style to show for a subset.
- SubsetBuilder - Interface in nxopen.assemblies
-
A SubsetBuilder is used to create or edit an
Subset
.
- SubsetCollection - Interface in nxopen.assemblies
-
Represents a collection of subset.
- subsetConfiguration() - Method in interface nxopen.assemblies.SubsetBuilder
-
- SubsetConfigurationBuilder - Interface in nxopen.assemblies
-
A SubsetConfigurationBuilder is used to edit the revision rule and effectivity used
to configure the contents of the subset.
- subsetDescription() - Method in interface nxopen.assemblies.SubsetBuilder
-
- subsetName() - Method in interface nxopen.assemblies.SubsetBuilder
-
- subsetPart() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the subset part where Design Control Elements are to be created
License requirements: None.
- SubsetRecipe - Interface in nxopen.assemblies
-
- subsets() - Method in interface nxopen.assemblies.ComponentAssembly
-
The collection of
Subset
s defined in the ComponentAssembly
Created in NX8.5.0
- subsetType() - Method in interface nxopen.assemblies.Subset
-
Returns the type of plm object used to create subset.
- subsetType() - Method in interface nxopen.assemblies.SubsetBuilder
-
Returns the type of PLM object used to create subset.
- SUBSPACE_MODOPT - Static variable in class nxopen.uf.UFConstants
-
- SubstepData() - Constructor for class nxopen.cae.optimization.TBSLoadCase.SubstepData
-
- substeps - Variable in class nxopen.cae.optimization.TBSLoadCase.SubstepData
-
- substituteComponent(Component, BasePart, String, String, int, ComponentAssembly.SubstitutionMode) - Method in interface nxopen.assemblies.ComponentAssembly
-
Substitutes an old component with a new component.
- substituteComponent(Tag, String, String, String, int) - Method in interface nxopen.uf.UFAssem
-
- SubstituteComponentData() - Constructor for class nxopen.uf.UFAssem.SubstituteComponentData
-
- substituteFastenerStack(int, int, FastenerAssy.StackTypeMethod, String, String, String, String, String, String) - Method in interface nxopen.tooling.FastenerAssy
-
Substitutes fastener stack
License requirements: None.
- substring - Variable in class nxopen.uf.UFDrf.GetTextSubstringData
-
- SUBSTRING_OF_SPECIFIED_LENGTH - Static variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.MatchUsingType
-
find shorter substrings
- substringCharacteristic - Variable in class nxopen.uf.UFDrf.GetTextSubstringData
-
- substringPosition - Variable in class nxopen.uf.UFDrf.GetTextSubstringData
-
- subSystem() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the faces or curves that make up the sub system.
- SubSystemBuilder - Interface in nxopen.features.shipdesign
-
This class is used to
edit the Sub System Definition of a
SubSystems
feature.
- SubSystemBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- SubSystems - Interface in nxopen.features.shipdesign
-
Represents a sub systems feature.
- SubSystemsBuilder - Interface in nxopen.features.shipdesign
-
- SubSystemsBuilder.Types - Class in nxopen.features.shipdesign
-
Used to indicate the type of sub system definition that is being edited.
- subtitle() - Method in interface nxopen.cae.ResultType
-
Returns the subtitle defined for the result type in the result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- subtituteReusableComponent(boolean) - Method in interface nxopen.tooling.AddReusablePart
-
Subtitutes a reusable part
License requirements: None.
- SUBTRACT - Static variable in class nxopen.cae.AfuMathOperation.MultiType
-
Subtracts AFU records
- SUBTRACT - Static variable in class nxopen.die.DieBooleanBuilder.BooleanType
-
Subtract the solids from the application solid.
- SUBTRACT - Static variable in class nxopen.features.Feature.BooleanType
-
Subtract
- SUBTRACT - Static variable in class nxopen.features.PasteFaceBuilder.PasteOptionType
-
each tool body will subtract from the target body.
- Subtract - Interface in nxopen.features
-
- SUBTRACT - Static variable in class nxopen.geometricutilities.BooleanOperation.BooleanType
-
Subtract
- SUBTRACT - Static variable in class nxopen.tooling.PocketBuilder.ModeType
-
do subtract
- SUBTRACT - Static variable in class nxopen.tooling.ReusableObjectPasteBuilder.PasteMethods
-
Subtract
- SUBTRACT - Static variable in class nxopen.tooling.ReusablePocketBuilder.Hole
-
Subtract pocket
- subtract() - Method in interface nxopen.tooling.SolidPatchBuilder
-
Returns the toggle for indicating if the tool is subtracted by the target or not.
- SUBTRACT - Static variable in class nxopen.tooling.TrimSolidBuilder.TrimSolidAction
-
Action to do subtract.
- SUBTRACT - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- SUBTRACT_OVERALL_WORKPIECES - Static variable in class nxopen.tooling.MoldInsertBuilder.BooleanType
-
subtract overall
- subtractBodies(Tag, Tag) - Method in interface nxopen.uf.UFModeling
-
- SubtractBodiesData() - Constructor for class nxopen.uf.UFModeling.SubtractBodiesData
-
- subtractBodiesWithRetainedOptions(Tag, Tag, boolean, boolean) - Method in interface nxopen.uf.UFModeling
-
- subType - Variable in class nxopen.cae.ElemEdgefaceObject
-
object sub_component type
- subType - Variable in class nxopen.cae.SetObject
-
object sub_component type
- subtype - Variable in class nxopen.cam.Tool.TypeAndSubtypeData
-
tool subtype
- subtype() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the type of hole
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- subtype() - Method in interface nxopen.features.RPODimension
-
Returns the subtype of the dimension.
- subtype() - Method in interface nxopen.geometricutilities.CircularFrameBuilder
-
Returns the subtype
License requirements: None.
- subtype() - Method in interface nxopen.geometricutilities.QuadrilateralFrameBuilder
-
Returns the subtype
License requirements: None.
- subtype() - Method in interface nxopen.geometricutilities.TriangularFrameBuilder
-
Returns the subtype
License requirements: None.
- subtype - Variable in class nxopen.Selection.MaskTriple
-
Object subtype.
- subType() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the layout transform type
License requirements: None.
- subType() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the positioning object sub type that is from pattern or imported data
License requirements: None.
- subtype - Variable in class nxopen.uf.UFCutter.AskTypeAndSubtypeData
-
- subtype - Variable in class nxopen.uf.UFFam.AttributeData
-
- subtype - Variable in class nxopen.uf.UFFam.ClassData
-
- subtype - Variable in class nxopen.uf.UFFam.FamilyData
-
- subtype - Variable in class nxopen.uf.UFModeling.AskChamferParmsData
-
- subtype - Variable in class nxopen.uf.UFObj.AskExtendedTypeAndSubtypeData
-
- subtype - Variable in class nxopen.uf.UFObj.AskTypeAndSubtypeData
-
- subtype - Variable in class nxopen.uf.UFSket.Info
-
- subtype - Variable in class nxopen.uf.UFView.AskTypeData
-
- subtypes - Variable in class nxopen.uf.UFCam.OptAskSubtypesData
-
- SUCCESS - Static variable in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult
-
- SUCCESS - Static variable in class nxopen.assemblies.DegreesOfFreedomResult
-
The degrees of freedom calculation succeeded.
- SUCCESS - Static variable in class nxopen.cae.aerostructures.author.ABB.Status
-
ABB computation success
- SUCCESS - Static variable in class nxopen.cae.aerostructures.MarginCalculationBuilder.CalculationStatus
-
success
- success - Variable in class nxopen.cam.CAMSetup.RetrieveToolData
-
- success - Variable in class nxopen.cam.InspectionSetup.RetrieveToolData
-
- success - Variable in class nxopen.cam.NCAssistantBuilder.ResultsData
-
success or not
- SUCCESS - Static variable in class nxopen.features.SketchConversionStatus.Type
-
Convert to sketch successful
- SUCCESS - Static variable in class nxopen.geometricanalysis.GeometricProperties.Status
-
Success
- SUCCESS - Static variable in class nxopen.mechanicalrouting.PartPlacementBuilder.PlacementValidationStatus
-
part placement is successful as expected
- SUCCESS - Static variable in class nxopen.routing.Run.FlipStatus
-
Component is flipped.
- SUCCESS - Static variable in class nxopen.RuleManager.InitializationStatusType
-
Initialization succeeded
- success - Variable in class nxopen.sim.IsvControlPanelBuilder.MachineControlReadVariableData
-
- success - Variable in class nxopen.weld.WeldJointBuilder.MidPointInformationData
-
Equals true if data was returned.
- SUCCESSFUL - Static variable in class nxopen.ame.AMEManager.PasteStatus
-
- SUCCESSFULLY_OPENED - Static variable in class nxopen.assemblies.ComponentAssembly.OpenComponentStatus
-
The component was opened as expected
- SUCCESSIVE - Static variable in class nxopen.motion.DriverMotionsData.DriverRotationType
-
Rotations are applied to the rotated link (as defined by previous rotations)
- SUFFIX - Static variable in class nxopen.annotations.ChamferSymbolPlacement
-
5 x 5 CHAM
- suffix() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the suffix
License requirements: None.
- SUFFIX - Static variable in class nxopen.annotations.TrueLengthTextPosition
-
Display True Length Text after dimension value
- suffix() - Method in interface nxopen.routing.BranchPathNumberingBuilder
-
Returns the suffix specified in the UI for the labels
License requirements: routing_hvac ("Routing HVAC")
.
- SUFFIX - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.NamingRuleType
-
- suffix - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- suffixStr() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the suffix str
License requirements: None.
- suggestScaleFactor() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns a value indicating whether to use automatic scale factor
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- suggestWrapMethodBasedOnStockSettings() - Method in interface nxopen.mechanicalrouting.InsulationBuilder
-
- SUM - Static variable in class nxopen.cae.AxiSymmetricParameters.EnvVal
-
- SUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.EnvelopeValue
-
- SUM - Static variable in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
-
Sum of all values of the selection area
- SUM - Static variable in class nxopen.cae.optimization.TBSLoadCaseManager.SelectionType
-
Sum of the selected load cases
- SUM - Static variable in class nxopen.cae.Post.NodeValueSharingCriterion
-
- SUM - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
-
- SUM - Static variable in class nxopen.cae.PostGraphBuilder.GeometryValue
-
- SUM - Static variable in class nxopen.cae.PostGraphBuilder.NodalCombination
-
- SUM - Static variable in class nxopen.cae.Result.ComputationType
-
compute sum.
- SUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
-
- SUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
-
- SUM - Static variable in class nxopen.cae.ResultProbeBuilder.GeometryValue
-
- SUM - Static variable in class nxopen.cae.ResultProbeBuilder.NodalCombination
-
- SUM - Static variable in class nxopen.cae.ResultsManipulationBuilder.ElementValueAtNode
-
- SUM - Static variable in class nxopen.preferences.RoutingPart.StockLengthDisplay
-
Display single sum for each type of stock.
- SUM_COMPLEX - Static variable in class nxopen.cae.AfuMathOperation.Overall
-
Gets complex sum values of AFU records
- SUM_MAGNITUDE - Static variable in class nxopen.cae.AfuMathOperation.Overall
-
Gets sum magnitude values of AFU records
- SUMMARY - Static variable in class nxopen.annotations.BillOfMaterialBuilder.DetailLevelType
-
- Summary() - Constructor for class nxopen.assemblies.ClearanceSet.Summary
-
- Summary(int, int, int, int, ClearanceAnalysisBuilder.CalculationMethodType, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, ClearanceSet.JobStatus, int) - Constructor for class nxopen.assemblies.ClearanceSet.Summary
-
Constructor for the Summary object.
- SUMMARY - Static variable in class nxopen.preferences.RoutingPart.DetailLevel
-
- Summary() - Constructor for class nxopen.uf.UFClear.Summary
-
- Summary(int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int, int) - Constructor for class nxopen.uf.UFClear.Summary
-
- SUMMARY_ONLY - Static variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.ListingOption
-
List only Summary information
- summaryStatusLine() - Method in interface nxopen.drawings.CompareReportBuilder
-
Returns the report summary status line
License requirements: None.
- SUMMERY - Static variable in class nxopen.routing.RouteManager.BomLevel
-
- sumProps(int, UFWeight.Properties[]) - Method in interface nxopen.uf.UFWeight
-
- sunRoof() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderWizardBuilder
-
Returns the sun roof opening geometry.
- SUPER_ELEMENT - Static variable in class nxopen.cae.FEModelOccAttribute.RepType
-
Alternate rep is a superelement
- SUPER_FINE - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
-
- SUPER_FINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
-
- SUPER_FINE - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
-
Super Fine
- SUPER_FINE - Static variable in class nxopen.ListCreator.ResolutionType
-
SuperFine
- SUPER_FINE - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType
-
- SUPER_OFFSET - Static variable in class nxopen.tooling.PunchInsertBuilder.NormalClearanceOptionTypeItems
-
The design option is fineblanking
- SUPER_OFFSET - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsBackingPlate
-
Punch pocket type in backing plate is super offset
- SUPER_OFFSET - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsPunchPlate
-
Punch pocket type in punch plate is super offset
- SUPER_OFFSET - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsStripperPlate
-
Punch pocket type in stripper plate is super offset
- superelementId() - Method in interface nxopen.cae.PostMesh
-
Returns the super element id of the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- superElementIncrement() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the first super element increment
License requirements: mechanisms ("MECHANISMS")
.
- superElementLink() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the first super element link
License requirements: mechanisms ("MECHANISMS")
.
- superElementReportInstance() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the super element report instance
License requirements: mechanisms ("MECHANISMS")
.
- superElementReportInstance() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the super element report instance
License requirements: mechanisms ("MECHANISMS")
.
- SUPERFINE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
-
Superfine
- superIterationType() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the query curve options
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- SuperPoint - Interface in nxopen.blockstyler
-
Represents a Super Point block .
- SUPERPOSITION - Static variable in class nxopen.cae.DurSpecialistEvent.EventType
-
Superposition Event
- superSample - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- SuperSection - Interface in nxopen.blockstyler
-
Represents a Super Section block .
- supplementarySymbol() - Method in interface nxopen.annotations.LineWeldSideData
-
Returns the weld supplementary symbol
License requirements: None.
- SupplementarySymbol - Class in nxopen.annotations
-
Specifies the supplementary weld symbol
- supplyPressure() - Method in interface nxopen.mechatronics.HydraulicValveBuilder
-
Returns the initial supply pressure.
- supplyPressure() - Method in interface nxopen.mechatronics.PneumaticValveBuilder
-
Returns the initial supply pressure.
- SUPPORT - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
- Support - Interface in nxopen.mfg.am
-
Interface for Model Support objects
To obtain an instance of this class use JAX_MFG_AM_PART_CreateSupports
.
- SUPPORT_CAP - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
- supportAllPids() - Method in interface nxopen.cae.WeldBuilder
-
Returns the option to include all PIDs within the search distance for creating welds
License requirements: None.
- SupportBuilder - Interface in nxopen.mfg.am
-
- SupportBuilder.Types - Class in nxopen.mfg.am
-
the AM support types
- supportCapOptions() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the support cap options.
- supportCapOptions() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the support cap options
License requirements: None.
- supportCrossSectionButton() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- supportedFacetTypes() - Method in interface nxopen.blockstyler.SelectFacetRegion
-
Returns the SupportedFacetTypes.
- supportFaces() - Method in interface nxopen.features.GeodesicSketchBuilder
-
Returns the collector of support faces.
- supportFaces() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the optional support faces.
- supportPlane() - Method in interface nxopen.geometricutilities.SupportPlaneData
-
Returns the support plane
License requirements: None.
- supportPlaneData() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the support plane data
License requirements: None.
- supportPlaneData() - Method in interface nxopen.features.AssociativeLineBuilder
-
Returns the support plane data
License requirements: None.
- SupportPlaneData - Interface in nxopen.geometricutilities
-
- SupportPlaneData.LockPlaneStatus - Class in nxopen.geometricutilities
-
Represents support plane lock status for associative basic curves
- supportPlaneLockStatus() - Method in interface nxopen.geometricutilities.SupportPlaneData
-
Returns the support plane lock status
License requirements: None.
- SupportSequenceCheck - Interface in nxopen.cae.qualityaudit
-
This action's output is the list of connections having more than 2 supports with wrong order (e.g. first support between the second and third).
- supportsFromCeiling() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the option to check , if supports are from ceiling
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- supportSize() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the support size.
- supportStereo() - Method in interface nxopen.preferences.SessionVisualizationSpecialEffects
-
Returns the support stereo flag.
- supportType() - Method in interface nxopen.cae.aerostructures.author.InputLoad
-
Returns the support type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- supportType() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the support type.
- suppress() - Method in interface nxopen.assemblies.Component
-
Suppresses the component in the ComponentAssembly that contains its controlling Arrangement.
- suppress(Component[]) - Method in interface nxopen.assemblies.Component
-
Suppresses an array of components in the ComponentAssembly that contains their
controlling Arrangement.
- suppress() - Method in interface nxopen.assemblies.ComponentPattern
-
Suppresses the component pattern object.
- suppress() - Method in interface nxopen.cam.Cutcom
-
Returns the suppress cutter compensation
License requirements: None.
- suppress() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the view break suppress status
License requirements: None.
- suppress() - Method in interface nxopen.features.Feature
-
Suppress the feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- SUPPRESS - Static variable in class nxopen.Update.FailureOption
-
Suppress failing object
- SUPPRESS - Static variable in class nxopen.userdefinedobjects.UserDefinedEvent.Reason
-
Suppress/Unsuppress UDO event
- SUPPRESS_ALL - Static variable in class nxopen.cam.SimulationOptionsBuilder.SimulationDisplayMode
-
suppress graphics and NC program updates
- SUPPRESS_ALL - Static variable in class nxopen.Update.FailureOption
-
Suppress failing objects and subsequent objects
- SUPPRESS_GRAPHICS - Static variable in class nxopen.cam.SimulationOptionsBuilder.SimulationDisplayMode
-
suppress graphics updates
- suppressAction() - Method in interface nxopen.SuppressByExpressionBuilder
-
Returns the suppress expression action.
- suppressAllFeatureAfter(NXObject, boolean) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Suppress child feature.
- suppressAngularZerosOption() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the angular dimension suppress zeros option
License requirements: None.
- suppressArray(Tag) - Method in interface nxopen.uf.UFAssem
-
- suppressBasedOnVolume() - Method in interface nxopen.cam.MinCutVolume
-
Returns the suppress path if less than minimum toggle
License requirements: None.
- SuppressByExpressionBuilder - Interface in nxopen
-
- SuppressByExpressionBuilder.ExpressionAction - Class in nxopen
-
Represents the expression action type.
- suppressChildren() - Method in interface nxopen.features.CurveFeature
-
Returns the suppress children of the feature
License requirements: None.
- suppressComponents(Component[], Arrangement[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Suppresses an array of components
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- suppressComponents(Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Suppresses an array of components in all
Arrangement
s in this ComponentAssembly
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX3.0.0
- suppressComponents(Component[], Arrangement[], String) - Method in interface nxopen.assemblies.ComponentAssembly
-
Suppresses an array of components in all
Arrangement
s in this ComponentAssembly
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX5.0.1
- suppressCutcom() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the suppress cutter compensation
License requirements: None.
- suppressCutcom() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the suppress cutter compensation
License requirements: None.
- suppressed() - Method in interface nxopen.annotations.Annotation
-
Returns the flag indicating whether the annotation is suppressed
License requirements: None.
- SUPPRESSED - Static variable in class nxopen.assemblies.ComponentAssembly.SuppressedState
-
Suppressed
- suppressed() - Method in interface nxopen.features.Feature
-
Returns the suppression status of the feature
License requirements: None.
- SUPPRESSED - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
A suppressed feature cannot be converted into an independent sketch
- SUPPRESSED - Static variable in class nxopen.positioning.ComponentConstraint.DirectionToFixed
-
The constraint is suppressed
- SUPPRESSED - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
Constraint is suppressed
- suppressed() - Method in interface nxopen.positioning.Constraint
-
Returns
the suppression state for the constraint.
- suppressed - Variable in class nxopen.uf.UFAssem.AskPartOccSuppressStateData
-
- SUPPRESSED_BY_EXP - Static variable in class nxopen.assemblies.ComponentAssembly.SuppressedState
-
Suppressed by expression
- suppressedstate - Variable in class nxopen.assemblies.ComponentAssembly.SuppressedStateData
-
The suppressed state
- SuppressedStateData() - Constructor for class nxopen.assemblies.ComponentAssembly.SuppressedStateData
-
- suppressFeature(Tag[]) - Method in interface nxopen.uf.UFModeling
-
- suppressFeatures(Feature[]) - Method in interface nxopen.features.FeatureCollection
-
Suppress the given features
License requirements: solid_modeling ("SOLIDS MODELING")
.
- SuppressHoleBuilder - Interface in nxopen.cae
-
- SuppressHoleBuilder.OptionChoice - Class in nxopen.cae
-
the enum for method
- SuppressHoleBuilder.OptionPointCreate - Class in nxopen.cae
-
the enum for point creation
- suppressHoleDiameterValue - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- suppressHolePointType - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- suppressHoleToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- suppressingArrangement() - Method in interface nxopen.assemblies.Component
-
Returns
the
Arrangement
that controls this component's
suppression state.
- suppressInstances(int, Tag[]) - Method in interface nxopen.uf.UFAssem
-
- SUPPRESSION_CONTROL_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
The suppression control of the component
- suppressionMethod() - Method in interface nxopen.annotations.SuppressPMIBuilder
-
Returns the suppression method
License requirements: None.
- suppressPartingButton() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Button for suppressing parting
License requirements: None.
- suppressPathDisplayFlag() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the suppress path display flag
License requirements: None.
- SuppressPMIBuilder - Interface in nxopen.annotations
-
Represents Annotations.SuppressPMIBuilder.
- SuppressPMIBuilder.SuppressionMethodType - Class in nxopen.annotations
-
Suppression methods
- suppressPortConstraint(Port, boolean) - Method in interface nxopen.routing.ClockPartBuilder
-
Suppress the constraind applied to the selected
Port
License requirements: routing_base ("Routing Basic")
Created in NX7.5.0
- suppressRegionSheet(String) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Suppress the region sheet
License requirements: None.
- suppressRetainedPmis() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the option to suppress retained PMIs in part
License requirements: None.
- suppressSurfaceModification() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the suppress surface modification flag.
- suppressViewBreaks(DraftingView) - Method in interface nxopen.drawings.DraftingViewCollection
-
Suppress all view breaks of the view.
- suppressWarningMessages() - Method in interface nxopen.VRMLImporter
-
Returns the Suppress Warning Messages flag.
- suppressWarnings - Variable in class nxopen.uf.UFStd.VrmlParams
-
- SURF - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point on surface
- SURFACE - Static variable in class nxopen.cae.optimization.TBSCastCondition.MiddlePlaneType
-
The elements are demolded at the actual surface of the restrict area
- SURFACE - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.ShipType
-
- SURFACE - Static variable in class nxopen.cae.xyplot.GraphStyle
-
Option to display plot in surface style
- SURFACE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Surface
- SURFACE - Static variable in class nxopen.cam.DmBndBuilder.ApplyFilletAtTypes
-
Part Surface
- surface() - Method in interface nxopen.cam.DrillSurfaceBuilder
-
Returns the selected surface,surface entity type covers Xform,Plane and Face
License requirements: None.
- SURFACE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Surface Feature
- SURFACE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Surface
- SURFACE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSubType
-
Surface
- surface() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
Returns the surface
License requirements: None.
- SURFACE - Static variable in class nxopen.die.OutputCurvesBuilder.TrimCurveCreateTypes
-
Surface.
- surface() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the collection of faces that represent the surface to be analyzed.
- surface() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the surface that the templates will be built to.
- SURFACE - Static variable in class nxopen.features.vehicledesign.BumperPendulumBuilder.VisualizationType
-
- SURFACE - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.VisualizationType
-
- SURFACE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.VisualizationTypes
-
- SURFACE - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.VisualizationType
-
- SURFACE - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.VisualizationType
-
- SURFACE - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.VisualizationType
-
- SURFACE - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.VisualizationType
-
Surface
- SURFACE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum
-
- SURFACE - Static variable in class nxopen.fields.SpatialMap.SubtypeEnum
-
3D degenerate to surface
- SURFACE - Static variable in class nxopen.motion.BodyContactRecurdyn.ContactType
-
- SURFACE - Static variable in class nxopen.motion.RoadBuilder.TypeChoices
-
Surface
- SURFACE - Static variable in class nxopen.weld.WeldSelectionType
-
surface
- SURFACE_ABSOPTIVITY - Static variable in class nxopen.cae.Result.Quantity
-
- SURFACE_ALL - Static variable in class nxopen.uf.UFBrep.GeomType
-
- SURFACE_ANALYSIS_HORIZON - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Surface Analysis Horizontal Lines Reflection
- SURFACE_ANALYSIS_LINES - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Surface Analysis Lines Reflection
- SURFACE_AREA - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Surface Area
- SURFACE_AREA_DRIVE - Static variable in class nxopen.cam.Preferences.GeometryTypes
-
surface area drive geometry
- SURFACE_COUNT - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- SURFACE_DATUM_LOCATION - Static variable in class nxopen.uf.UFConstants
-
- SURFACE_DATUM_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- SURFACE_DEMOLD - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption
-
Demold surface definition
- SURFACE_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- SURFACE_DRILL - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption
-
Drillable surface definition
- SURFACE_EDGES - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum
-
- SURFACE_EMISSIVITY - Static variable in class nxopen.cae.Result.Quantity
-
- SURFACE_FINISH - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI surface finish type
- SURFACE_FINISH - Static variable in class nxopen.annotations.SearchModelViewBuilder.PmiTypes
-
surface finish type
- SURFACE_FINISH_SYMBOL - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum
-
- SURFACE_FINISH_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- SURFACE_GRAPH - Static variable in class nxopen.features.LatticeBuilder.LatticeTypes
-
- SURFACE_JOINT - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- SURFACE_JOINT - Static variable in class nxopen.annotations.Symbol
-
Specifies surface joint weld symbol (ISO and DIN only )
- SURFACE_MEASUREMENT_LOCATION - Static variable in class nxopen.uf.UFConstants
-
- SURFACE_MEASUREMENT_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- SURFACE_NORMAL - Static variable in class nxopen.weld.JointmarkBuilder.OrientationMethodTypes
-
Surface Normals.
- SURFACE_OF_REVOLUTION - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Surface of Revolution
- SURFACE_OF_REVOLUTION - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Surface of Revolution
- SURFACE_OF_REVOLUTION - Static variable in class nxopen.Face.FaceType
-
Face from surface of revolution
- SURFACE_OF_REVOLUTION - Static variable in class nxopen.IgesCreator.MapRevolvedFacesOption
-
exported revolved faces as surface of revolution
- SURFACE_PERCENT - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutAreaType
-
Surface %
- SURFACE_PERCENT - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutAreaType
-
Surface %
- SURFACE_PROFILE - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies surface profile characteristics
- SURFACE_PROFILE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Profile of Surface
- SURFACE_PROFILE_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- SURFACE_REGION - Static variable in class nxopen.cam.Preferences.AuxiliaryFloorColorSelectionTypes
-
Deprecated.
Surface Region
- SURFACE_REGION - Static variable in class nxopen.cam.Preferences.BlankSelectionTypes
-
Deprecated.
Surface Region
- SURFACE_REGION - Static variable in class nxopen.cam.Preferences.CutAreaSelectionTypes
-
Deprecated.
Surface Region
- SURFACE_REGION - Static variable in class nxopen.cam.Preferences.PartSelectionTypes
-
Deprecated.
Surface Region
- SURFACE_REGION - Static variable in class nxopen.cam.Preferences.WallSelectionTypes
-
Deprecated.
Surface Region
- SURFACE_REGION_FEATURES - Static variable in class nxopen.cam.Preferences.SelectionTypes
-
surface region features
- SURFACE_SPEED - Static variable in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn
-
surface speed
- SURFACE_STAMP - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption
-
Stampable surface definition
- SURFACE_TO_SURFACE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ContactType
-
The draw components contact type is surface to surface.
- SURFACE_TURN - Static variable in class nxopen.cae.optimization.TBSShapeLinkCondition.ManufacturingOption
-
Turnable surface definition
- SURFACE_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- SURFACE_WELD - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- SURFACE_WELD - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Surface Weld command
- SurfaceAnalysisDisplay - Interface in nxopen.geometricanalysis
-
Represents a tool control whether to show a surface's poles and knots
To obtain an instance of this class, refer to
AnalysisObjectCollection
Created in NX6.0.0
- SurfaceAnalysisDisplay.ShowFlagType - Class in nxopen.geometricanalysis
-
Show flag types
- surfaceAnalysisDisplayObject() - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Returns object for displaying surface analysis information .
- surfaceAngleAcceptableColor() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the surface angle acceptable color.
- surfaceAngleFailureColor() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the surface angle failure color.
- surfaceAngleFailureLimit() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the surface angle failure limit.
- surfaceAngleWarningColor() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the surface angle warning color.
- surfaceAngleWarningLimit() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the surface angle warning limit.
- surfaceAngularTolerance - Variable in class nxopen.facet.FacetingParameters
-
This is the maximum angular variation
in radians of the surface normal
over the facet.
- surfaceAngularTolerance - Variable in class nxopen.uf.UFFacet.Parameters
-
- surfaceArea() - Method in interface nxopen.facet.FacetedBody
-
Returns
the surface area of the faceted body in part units for its
highest level of detail.
- surfaceBuildMethod() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the addendum surface build method.
- SurfaceCoatBuilder - Interface in nxopen.cae
-
- SurfaceCoatBuilder.SelectionMethod - Class in nxopen.cae
-
Represents the selection method to be used
- SurfaceColorOption - Class in nxopen.cae.xyplot
-
Represents the surface filling color option
- SurfaceContinuityAnalysis - Interface in nxopen.geometricanalysis
-
- SurfaceContinuityAnalysisBuilder - Interface in nxopen.geometricanalysis
-
- SurfaceContinuityAnalysisBuilder.CurvatureType - Class in nxopen.geometricanalysis
-
Curvature types
- SurfaceContinuityAnalysisBuilder.ReportingType - Class in nxopen.geometricanalysis
-
Reporting types
- SurfaceContinuityAnalysisBuilder.Types - Class in nxopen.geometricanalysis
-
Two possible types for the dialog
- SurfaceContour - Interface in nxopen.cam
-
Represents a Surface Contour operation
To create or edit an instance of this class, use
SurfaceContourBuilder
Created in NX7.5.0
- SurfaceContourBuilder - Interface in nxopen.cam
-
- SurfaceContourBuilder.AccessVectorMethodType - Class in nxopen.cam
-
Available types for access vector for the contour profile method of surface milling
- SurfaceContourBuilder.CleanupTypes - Class in nxopen.cam
-
Available types for cleanup
- SurfaceContourBuilder.CutDirectionTypes - Class in nxopen.cam
-
The types of the cut direction
- SurfaceContourBuilder.DriveMethodTypes - Class in nxopen.cam
-
Available types for Drive Method
- SurfaceData() - Constructor for class nxopen.facet.FacetedFace.SurfaceData
-
- surfaceDatatype() - Method in interface nxopen.motion.RoadBuilder
-
Returns the surface datatype of the road object
License requirements: mechanisms ("MECHANISMS")
.
- surfaceDesignU() - Method in interface nxopen.DxfdwgCreator
-
Returns the surface design u - this will set the surface density along U direction.
- surfaceDesignV() - Method in interface nxopen.DxfdwgCreator
-
Returns the surface design V - this will set the surface density along V direction.
- surfaceDisplay() - Method in interface nxopen.preferences.ViewVisualizationVisual
-
- SurfaceDisplayOptions() - Constructor for class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions
-
Deprecated.
- SurfaceDisplayOptions(ViewVisualizationVisual.RenderingStyle, ViewVisualizationVisual.HiddenEdges, boolean, boolean, int, ViewVisualizationVisual.SmoothEdgeFont, ViewVisualizationVisual.SmoothEdgeWidth) - Constructor for class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions
-
Deprecated.
Constructor for the SurfaceDisplayOptions object.
- surfaceDistanceTolerance - Variable in class nxopen.facet.FacetingParameters
-
This is the maximum distance from
the surface to the facet.
- surfaceDistTolerance - Variable in class nxopen.uf.UFFacet.Parameters
-
- SurfaceDriveGeometry - Interface in nxopen.cam
-
Represents a CAM drive geometry object for surface area .
- SurfaceDriveGeometrySet - Interface in nxopen.cam
-
Represents a geometry set for a CAM object.
- SurfaceDriveGeometrySetList - Interface in nxopen.cam
-
Represents a list of objects.
- surfaceExtension() - Method in interface nxopen.preferences.SessionModeling
-
Returns the surface extension option.
- surfaceFileName() - Method in interface nxopen.motion.RoadBuilder
-
Returns the path and file name of the surface curve
License requirements: mechanisms ("MECHANISMS")
.
- SurfaceFinish - Interface in nxopen.annotations
-
Represents a PMI Surface Finish
To create or edit an instance of this class, use
SurfaceFinishBuilder
Created in NX6.0.0
- SurfaceFinishBuilder - Interface in nxopen.annotations
-
- SurfaceFinishBuilder.FinishType - Class in nxopen.annotations
-
the valid types for pmi finish type
- SurfaceFinishBuilder.StandardType - Class in nxopen.annotations
-
the valid types for pmi surface finish standards
- surfaceFinishColor() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the surface finish symbol color
License requirements: None.
- surfaceFinishFont() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the surface finish symbol font
License requirements: None.
- SurfaceFinishStandard - Class in nxopen.annotations
-
Specifies the drafting surface finish standard type
- surfaceFinishType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the surface finish type
License requirements: None.
- surfaceFinishWidth() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the surface finish symbol width
License requirements: None.
- SurfaceIntersection - Interface in nxopen.geometricanalysis
-
Represents a SurfaceIntersection builder
To create or edit an instance of this class, use
SurfaceIntersectionBuilder
Created in NX7.5.0
- SurfaceIntersectionBuilder - Interface in nxopen.geometricanalysis
-
- SurfaceIntersectionBuilder.CalculationTypes - Class in nxopen.geometricanalysis
-
Enumeration for needle calculation method
- SurfaceIntersectionBuilder.DirectionTypes - Class in nxopen.geometricanalysis
-
Enumeration for needle direction type
- SurfaceIntersectionBuilder.LabelValues - Class in nxopen.geometricanalysis
-
Enumeration for label computation method
- SurfaceIntersectionBuilder.NormalTypes - Class in nxopen.geometricanalysis
-
Enumeration for face normal
- SurfaceIntersectionBuilder.ProjectionTypes - Class in nxopen.geometricanalysis
-
Projection types
- SurfaceIntersectionBuilder.ScalingTypes - Class in nxopen.geometricanalysis
-
Enumeration for needle display type
- SurfaceIntersectionBuilder.XyzTypes - Class in nxopen.geometricanalysis
-
Enumeration for X, Y or Z projection plane
- surfaceLength() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the surface length type which determines the length of the general surface.
- surfaceNormalVectorI() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the surface normal vector I component
License requirements: None.
- surfaceNormalVectorJ() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the surface normal vector J component
License requirements: None.
- surfaceNormalVectorK() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the surface normal vector K component
License requirements: None.
- surfaceOffset() - Method in interface nxopen.die.PadChildBuilder
-
Returns the surface offset of the die pad.
- surfaceOffset() - Method in interface nxopen.die.PadParentBuilder
-
Returns the surface offset of die pads.
- surfaceOffset() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the surface offset
License requirements: None.
- surfaceOption() - Method in interface nxopen.cam.DrillSurfaceBuilder
-
Returns the surface option
License requirements: None.
- surfaceOrientEnum() - Method in interface nxopen.display.TrueShadingBuilder
-
Returns the shadow plane surface orientation enum
License requirements: None.
- SurfaceParms() - Constructor for class nxopen.uf.UFGdt.SurfaceParms
-
- SurfaceParms(int, Tag[]) - Constructor for class nxopen.uf.UFGdt.SurfaceParms
-
- surfacePointUV() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the UV values of the picked point on surface
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- surfaceProfile() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the analysis surface profile fitting type
License requirements: None.
- surfaceProfile() - Method in interface nxopen.motion.RoadBuilder
-
Returns the path and file name of the surface curve
License requirements: mechanisms ("MECHANISMS")
.
- surfaceProfileMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the analysis surface profile fitting mode
License requirements: None.
- surfaceProfileModeBuilder() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the Surface Profile Mode Builder
License requirements: None.
- surfaceRange() - Method in interface nxopen.features.StudioXformBuilder
-
- surfaceRange() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the surface range
License requirements: None.
- surfaceRange() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the surface range
License requirements: None.
- surfaceRange() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the surface range data, which controls the enlarged parameters of surface.
- surfaceRange() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the surface range for enlarging surface.
- surfaceRange() - Method in interface nxopen.tooling.SplitSolidBuilder
-
Returns the utility to get enlarged parameters.
- SurfaceRangeBuilder - Interface in nxopen.geometricutilities
-
Represents the surface range and anchor builder .
- SurfaceRangeBuilder.AnchorPositionType - Class in nxopen.geometricutilities
-
Represents the anchor position type
- surfaceRangeControl() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the surface range
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- SurfaceRebuildData - Interface in nxopen
-
Represents surface rebuild data structure.
- SurfaceRebuildData.Type - Class in nxopen
-
Surface rebuild types.
- surfaceRegionName() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the surface region name
License requirements: None.
- SurfaceRegions - Interface in nxopen.cam
-
- SurfaceRegions.CreateRegionsTypes - Class in nxopen.cam
-
enum for create regions
- SurfaceRegions.FeatureTypes - Class in nxopen.cam
-
enum for feature type
- SURFACES - Static variable in class nxopen.cam.InspectionPatternFeatureBuilder.FeatureFilterTypes
-
Only surface inspection features will be listed
- surfaces() - Method in interface nxopen.ObjectTypeSelector
-
Returns the surfaces - This should be set to true if surfaces are desired in the output file
License requirements: None.
- surfaceSelection() - Method in interface nxopen.cae.CircularImprintBuilder
-
Returns the selected surface object(s)
License requirements: None.
- surfaceSensitivityMode() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the surface sensitivity mode
License requirements: cam_base ("CAM BASE")
.
- surfaceSensitivityTolerance() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the surface sensitivity tolerance
License requirements: cam_base ("CAM BASE")
.
- surfaceShapeOption() - Method in interface nxopen.features.ExtendSheetBuilder
-
Returns the method by which the surface is extended which defines the shape
License requirements: None.
- surfaceShapeOption() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the extension method
License requirements: None.
- surfaceSpeedBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the surface_speed builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- surfaceSpeedBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the surface_speed builder (inheritable Double)
License requirements: cam_base ("CAM BASE")
.
- SurfaceStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the surface display style.
- surfaceTag - Variable in class nxopen.uf.UFModlFeatures.CreateSurfFromCloudData
-
- surfaceTolerance() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the surface tolerance.
- surfaceType() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the surface type used to determine offset direction.
- surfaceType() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the surface type used to determine offset direction.
- surfaceType() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the surface type
License requirements: None.
- surfaceType() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the surface type.
- surfaceType() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the type of parting surface to be created.
- surfaceTypeOption() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the surface type option
License requirements: None.
- SurfaceUVDirectionBuilder - Interface in nxopen
-
Represents an edit surface u/v direction builder that allows reversing or swapping parametric directions.
- surfaceVectorFace() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the surface vector face.
- SurfaceWeld - Interface in nxopen.weld
-
Represents a surface weld feature
To create or edit an instance of this class, use
SurfaceWeldBuilder
Created in NX9.0.0
- SurfaceWeldBuilder - Interface in nxopen.weld
-
- SurfaceWeldBuilder.DestinationTypes - Class in nxopen.weld
-
The option specifying where the surface weld feature should be created.
- SURFACING - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSymbolType
-
- SURFACING - Static variable in class nxopen.annotations.Symbol
-
Specifies surfacing weld symbol (ISO and DIN only)
- surfAnalData - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplay - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplayDistance - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplayMax - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplayMean - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplayMin - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplayNormal - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplayRefl - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplaySec - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplaySlope - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplayU - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalDisplayV - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfAnalFineness - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- surfCtrlType - Variable in class nxopen.uf.UFModl.RoughOffset
-
- surfMeshSizeVariation - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- surfMeshSizeVariation - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- surfMethod - Variable in class nxopen.uf.UFModl.RoughOffset
-
- surfReg() - Method in interface nxopen.UFSession
-
- surfTrimTol() - Method in interface nxopen.IgesImporter
-
Returns the surf trim tol - surface trimming tolerance
License requirements: None.
- surroundingDataProximityDistance() - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
Returns a proximity to Routing Content method has been selected to determine the surrounding content then
this is the distance value used to perform the evaluation.
- surroundingDataRecipeMethodType() - Method in interface nxopen.assemblies.MechanicalRoutingSubsetBuilder
-
- surroundingPatchSurfaceFilename() - Method in interface nxopen.features.FeatureBuilder
-
Returns the surrounding patch surface filename
License requirements: None.
- SUSPECT - Static variable in class nxopen.cam.FeatureGeometryGroup.ProcessStatus
-
Feature group status is suspected
- SUSPECT_BOUNDING_BOX_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- suspectBoundingBoxColor() - Method in interface nxopen.cam.Preferences
-
Returns the suspect bounding box color
License requirements: None.
- suspendCreateToolbar() - Method in interface nxopen.uf.UFUi
-
- suspendInitAppstate() - Method in interface nxopen.uf.UFUi
-
- suspendRemoveToolbar() - Method in interface nxopen.uf.UFUi
-
- SUSPENSION_TEMPLATE - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.MotionMethod
-
From a defined suspension template.
- suspensionTemplate() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify which suspension template will be used.
- suspensionTemplateFileName() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the name of the file containing points defining a suspension template.
- SUSSMANBATHE - Static variable in class nxopen.PhysicalMaterial.Type
-
Sussman-Bathe hyperelastic material
- SV_KIM_DEGOF_DIRECTION_NONE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection
-
- SV_KIM_DEGOF_DIRECTION_XNEGATIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection
-
- SV_KIM_DEGOF_DIRECTION_XPOSITIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection
-
- SV_KIM_DEGOF_DIRECTION_YNEGATIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection
-
- SV_KIM_DEGOF_DIRECTION_YPOSITIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection
-
- SV_KIM_DEGOF_DIRECTION_ZNEGATIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection
-
- SV_KIM_DEGOF_DIRECTION_ZPOSITIVE - Static variable in class nxopen.uf.UFSim.SvKimDegofDirection
-
- SvtBuilder - Interface in nxopen.drawings
-
- SW_PART_ASM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- swap(int, int) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Exchanges the position of two objects inside the list.
- swap(NamingRuleBuilder, NamingRuleBuilder) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Exchanges the position of two objects inside the list.
- swap(TypeMappingBuilder, TypeMappingBuilder) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ArbitraryAreaSeedBuilder, ArbitraryAreaSeedBuilder) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DatumReferenceBuilder, DatumReferenceBuilder) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Exchanges the position of two objects inside the list.
- swap(FeatureControlFrameDataBuilder, FeatureControlFrameDataBuilder) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Exchanges the position of two objects inside the list.
- swap(FeatureControlFrameIndicatorBuilder, FeatureControlFrameIndicatorBuilder) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.annotations.LeaderDataList
-
Exchanges the position of two objects inside the list.
- swap(LeaderData, LeaderData) - Method in interface nxopen.annotations.LeaderDataList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(MasterSymbolListItemBuilder, MasterSymbolListItemBuilder) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SymbolCatalogParameterBuilder, SymbolCatalogParameterBuilder) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Exchanges the position of two objects inside the list.
- swap(TitleBlockCellBuilder, TitleBlockCellBuilder) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.assemblies.PartitionList
-
Exchanges the position of two objects inside the list.
- swap(Partition, Partition) - Method in interface nxopen.assemblies.PartitionList
-
Exchanges the position of two objects inside the list.
- swap(UIBlock, UIBlock) - Method in interface nxopen.blockstyler.SetList
-
Swaps the location of two items
License requirements: None.
- swap(int, int) - Method in interface nxopen.BodyList
-
Exchanges the position of two objects inside the list.
- swap(Body, Body) - Method in interface nxopen.BodyList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DependentMeshListItemBuilder, DependentMeshListItemBuilder) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Exchanges the position of two objects inside the list.
- swap(ManualSweepBetweenListItemSelection, ManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Exchanges the position of two objects inside the list.
- swap(MeshManualSweepBetweenListItemSelection, MeshManualSweepBetweenListItemSelection) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Exchanges the position of two objects inside the list.
- swap(BoundaryMemberSet, BoundaryMemberSet) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.BoundarySetList
-
Exchanges the position of two objects inside the list.
- swap(BoundarySet, BoundarySet) - Method in interface nxopen.cam.BoundarySetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Exchanges the position of two objects inside the list.
- swap(BoundaryTurnVariableStockSet, BoundaryTurnVariableStockSet) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.CAMFeatureList
-
Exchanges the position of two objects inside the list.
- swap(CAMFeature, CAMFeature) - Method in interface nxopen.cam.CAMFeatureList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Exchanges the position of two objects inside the list.
- swap(CollisionPairBuilder, CollisionPairBuilder) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.CustomLoopSetList
-
Exchanges the position of two objects inside the list.
- swap(CustomLoopSet, CustomLoopSet) - Method in interface nxopen.cam.CustomLoopSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.CutVolumeList
-
Exchanges the position of two objects inside the list.
- swap(CutVolume, CutVolume) - Method in interface nxopen.cam.CutVolumeList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DriveChainItemBuilder, DriveChainItemBuilder) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.GeometrySetList
-
Exchanges the position of two objects inside the list.
- swap(GeometrySet, GeometrySet) - Method in interface nxopen.cam.GeometrySetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(HoldingSystemBuilder, HoldingSystemBuilder) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.HoleBossSetList
-
Exchanges the position of two objects inside the list.
- swap(HoleBossSet, HoleBossSet) - Method in interface nxopen.cam.HoleBossSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Exchanges the position of two objects inside the list.
- swap(InPathEventDataBuilder, InPathEventDataBuilder) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.LaserControlPointList
-
Exchanges the position of two objects inside the list.
- swap(LaserControlPoint, LaserControlPoint) - Method in interface nxopen.cam.LaserControlPointList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ManualFeatureBuilder, ManualFeatureBuilder) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.SplitterList
-
Exchanges the position of two objects inside the list.
- swap(Splitter, Splitter) - Method in interface nxopen.cam.SplitterList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Exchanges the position of two objects inside the list.
- swap(SurfaceDriveGeometrySet, SurfaceDriveGeometrySet) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Exchanges the position of two objects inside the list.
- swap(TabPointDataBuilder, TabPointDataBuilder) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.ThreadedBossSetList
-
Exchanges the position of two objects inside the list.
- swap(ThreadedBossSet, ThreadedBossSet) - Method in interface nxopen.cam.ThreadedBossSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Exchanges the position of two objects inside the list.
- swap(ThreadedHoleSet, ThreadedHoleSet) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ToolPathSplitItemBuilder, ToolPathSplitItemBuilder) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.UdeList
-
Exchanges the position of two objects inside the list.
- swap(Ude, Ude) - Method in interface nxopen.cam.UdeList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Exchanges the position of two objects inside the list.
- swap(WedmCustomBoundaryDataBuilder, WedmCustomBoundaryDataBuilder) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.cam.WireGuideList
-
Exchanges the position of two objects inside the list.
- swap(WireGuide, WireGuide) - Method in interface nxopen.cam.WireGuideList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.DateItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DateItemBuilder, DateItemBuilder) - Method in interface nxopen.DateItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ConnectionLocationBuilder, ConnectionLocationBuilder) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Exchanges the position of two objects inside the list.
- swap(LeaderLineBuilder, LeaderLineBuilder) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.diagramming.PortBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PortBuilder, PortBuilder) - Method in interface nxopen.diagramming.PortBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Exchanges the position of two objects inside the list.
- swap(LineTypeBuilder, LineTypeBuilder) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Exchanges the position of two objects inside the list.
- swap(DieAssistantFlangeProfile, DieAssistantFlangeProfile) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Exchanges the position of two objects inside the list.
- swap(DieAssistantTrimProfile, DieAssistantTrimProfile) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.die.DieBooleanBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DieBooleanBuilder, DieBooleanBuilder) - Method in interface nxopen.die.DieBooleanBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.die.DieLimitsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DieLimitsBuilder, DieLimitsBuilder) - Method in interface nxopen.die.DieLimitsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.die.DieLocationBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DieLocationBuilder, DieLocationBuilder) - Method in interface nxopen.die.DieLocationBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DrawBeadSegmentBuilder, DrawBeadSegmentBuilder) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.die.PierceItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PierceItemBuilder, PierceItemBuilder) - Method in interface nxopen.die.PierceItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PointCloudClippingBoxesListItemBuilder, PointCloudClippingBoxesListItemBuilder) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(AttributeItemBuilder, AttributeItemBuilder) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PrimaryContentItemBuilder, PrimaryContentItemBuilder) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SectionLineSegmentBuilder, SectionLineSegmentBuilder) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ShipDraftingViewLinesBuilder, ShipDraftingViewLinesBuilder) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ViewStyleShipbuildingLinesBuilder, ViewStyleShipbuildingLinesBuilder) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.ExpressionCollectorSetList
-
Exchanges the position of two objects inside the list.
- swap(ExpressionCollectorSet, ExpressionCollectorSet) - Method in interface nxopen.ExpressionCollectorSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.ExpressionSectionSetList
-
Exchanges the position of two objects inside the list.
- swap(ExpressionSectionSet, ExpressionSectionSet) - Method in interface nxopen.ExpressionSectionSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.FeatureList
-
Exchanges the position of two objects inside the list.
- swap(Feature, Feature) - Method in interface nxopen.features.FeatureList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(GlobalShapingCurveOffsetBuilder, GlobalShapingCurveOffsetBuilder) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(GlobalShapingPointOffsetBuilder, GlobalShapingPointOffsetBuilder) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PartGeometryCopySelectBuilder, PartGeometryCopySelectBuilder) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PointSetFacePercentageBuilder, PointSetFacePercentageBuilder) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.RegionListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(RegionListItemBuilder, RegionListItemBuilder) - Method in interface nxopen.features.RegionListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(BendListItemBuilder, BendListItemBuilder) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ConvertInputListItemBuilder, ConvertInputListItemBuilder) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(FeatureBendPropertiesBuilder, FeatureBendPropertiesBuilder) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(JoggleInputListItemBuilder, JoggleInputListItemBuilder) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SMBoundaryConditionBuilder, SMBoundaryConditionBuilder) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Exchanges the position of two objects inside the list.
- swap() - Method in interface nxopen.features.ShelfBuilder
-
Returns the swap
License requirements: None.
- swap(int, int) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Exchanges the position of two objects inside the list.
- swap(AnchorPoint, AnchorPoint) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(BulkHeadListItemBuilder, BulkHeadListItemBuilder) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(CornerCutListItemBuilder, CornerCutListItemBuilder) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DeckListItemBuilder, DeckListItemBuilder) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DrawingPartBuilder, DrawingPartBuilder) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(DrawingSheetBuilder, DrawingSheetBuilder) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ItFrameListItemBuilder, ItFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(OrientationRegionItemBuilder, OrientationRegionItemBuilder) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PlaneListBuilder, PlaneListBuilder) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PlateBoundaryOptionBuilder, PlateBoundaryOptionBuilder) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SeamBlockBuilder, SeamBlockBuilder) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SectionViewBuilder, SectionViewBuilder) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ShipNamesBuilder, ShipNamesBuilder) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(StandardPartItemBuilder, StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SteelInsulationBoundaryBuilder, SteelInsulationBoundaryBuilder) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SubSystemBuilder, SubSystemBuilder) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(TransFrameListItemBuilder, TransFrameListItemBuilder) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SmoothRangeBuilder, SmoothRangeBuilder) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Exchanges the position of two objects inside the list.
- swap(CageSectionData, CageSectionData) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(VariableRadiusPointsBuilder, VariableRadiusPointsBuilder) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(CloseRangeCameraListItemBuilder, CloseRangeCameraListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(CloseRangeDemoCylinderListItemBuilder, CloseRangeDemoCylinderListItemBuilder) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.fields.PathObjectsList
-
Exchanges the position of two objects inside the list.
- swap(PathObjects, PathObjects) - Method in interface nxopen.fields.PathObjectsList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Exchanges the position of two objects inside the list.
- swap(BlendSetbackBuilder, BlendSetbackBuilder) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(BoundaryDefinitionBuilder, BoundaryDefinitionBuilder) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Exchanges the position of two objects inside the list.
- swap(BoundingObjectBuilder, BoundingObjectBuilder) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Exchanges the position of two objects inside the list.
- swap(EntityUsageInfo, EntityUsageInfo) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Exchanges the position of two objects inside the list.
- swap(FaceSetOffset, FaceSetOffset) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(FtmFixedCurvesBuilder, FtmFixedCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(FtmTransformCurvesBuilder, FtmTransformCurvesBuilder) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(FtmTransformPointsBuilder, FtmTransformPointsBuilder) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Exchanges the position of two objects inside the list.
- swap(InstanceEditedExpressionItem, InstanceEditedExpressionItem) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Exchanges the position of two objects inside the list.
- swap(ParentEquivalencyMap, ParentEquivalencyMap) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Exchanges the position of two objects inside the list.
- swap(PatternIncrementItem, PatternIncrementItem) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Exchanges the position of two objects inside the list.
- swap(PatternSpacingsListItem, PatternSpacingsListItem) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ReduceSurfaceRadiusFaceGroupBuilder, ReduceSurfaceRadiusFaceGroupBuilder) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(RotationSetBuilder, RotationSetBuilder) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ScalingSetBuilder, ScalingSetBuilder) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.SelectionListList
-
Exchanges the position of two objects inside the list.
- swap(SelectionList, SelectionList) - Method in interface nxopen.geometricutilities.SelectionListList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SpinePlaneBuilder, SpinePlaneBuilder) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Exchanges the position of two objects inside the list.
- swap(StyledSweepDoubleOnPathDimBuilder, StyledSweepDoubleOnPathDimBuilder) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Exchanges the position of two objects inside the list.
- swap(TransitionCurveBuilder, TransitionCurveBuilder) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Exchanges the position of two objects inside the list.
- swap(TransitionLawNodeBuilder, TransitionLawNodeBuilder) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Exchanges the position of two objects inside the list.
- swap(TrimCurveBoundingObjectBuilder, TrimCurveBoundingObjectBuilder) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Exchanges the position of two objects inside the list.
- swap(TwoExpressionsCollectorSet, TwoExpressionsCollectorSet) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Exchanges the position of two objects inside the list.
- swap(TwoExpressionsSectionSet, TwoExpressionsSectionSet) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.ListCreatorList
-
Exchanges the position of two objects inside the list.
- swap(ListCreator, ListCreator) - Method in interface nxopen.ListCreatorList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PathTransitionBuilder, PathTransitionBuilder) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ExternalConnectionElementBuilder, ExternalConnectionElementBuilder) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(GanttOperationConditionBuilder, GanttOperationConditionBuilder) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(GanttOperationParameterBuilder, GanttOperationParameterBuilder) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(MATLABSignalConnectionBuilder, MATLABSignalConnectionBuilder) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Exchanges the position of two objects inside the list.
- swap(PathConstraintFrameBuilder, PathConstraintFrameBuilder) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ProxyObjectParameterBuilder, ProxyObjectParameterBuilder) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(RuntimeFormulaParameterBuilder, RuntimeFormulaParameterBuilder) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SensorsActuatorsListBuilder, SensorsActuatorsListBuilder) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SHMSignalConnectionBuilder, SHMSignalConnectionBuilder) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SignalConnectionBuilder, SignalConnectionBuilder) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SignalMappingConnectionBuilder, SignalMappingConnectionBuilder) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.ModelingViewList
-
Exchanges the position of two objects inside the list.
- swap(ModelingView, ModelingView) - Method in interface nxopen.ModelingViewList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.motion.ConfigurationParameterList
-
Exchanges the position of two objects inside the list.
- swap(ConfigurationParameter, ConfigurationParameter) - Method in interface nxopen.motion.ConfigurationParameterList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ControlInputPortBuilder, ControlInputPortBuilder) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.motion.InputPortAssociationList
-
Exchanges the position of two objects inside the list.
- swap(InputPortAssociation, InputPortAssociation) - Method in interface nxopen.motion.InputPortAssociationList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.motion.OutputPortAssociationList
-
Exchanges the position of two objects inside the list.
- swap(OutputPortAssociation, OutputPortAssociation) - Method in interface nxopen.motion.OutputPortAssociationList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.motion.PortVariableList
-
Exchanges the position of two objects inside the list.
- swap(PortVariable, PortVariable) - Method in interface nxopen.motion.PortVariableList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.motion.SegmentBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SegmentBuilder, SegmentBuilder) - Method in interface nxopen.motion.SegmentBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.motion.SignalChartListItemList
-
Exchanges the position of two objects inside the list.
- swap(SignalChartListItem, SignalChartListItem) - Method in interface nxopen.motion.SignalChartListItemList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.NXObjectList
-
Exchanges the position of two objects inside the list.
- swap(NXObject, NXObject) - Method in interface nxopen.NXObjectList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.ObjectList
-
Exchanges the position of two objects inside the list.
- swap(TaggedObject, TaggedObject) - Method in interface nxopen.ObjectList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.PlaneList
-
Exchanges the position of two objects inside the list.
- swap(Plane, Plane) - Method in interface nxopen.PlaneList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.PointList
-
Exchanges the position of two objects inside the list.
- swap(Point, Point) - Method in interface nxopen.PointList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(HydraulicLifterBuilder, HydraulicLifterBuilder) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Exchanges the position of two objects inside the list.
- swap(LinearCamBuilder, LinearCamBuilder) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Exchanges the position of two objects inside the list.
- swap(MachineAdjustmentBuilder, MachineAdjustmentBuilder) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Exchanges the position of two objects inside the list.
- swap(MountPointBuilder, MountPointBuilder) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Exchanges the position of two objects inside the list.
- swap(RotaryCamBuilder, RotaryCamBuilder) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(UserMotionBuilder, UserMotionBuilder) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.RegionPointList
-
Exchanges the position of two objects inside the list.
- swap(RegionPoint, RegionPoint) - Method in interface nxopen.RegionPointList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.routing.RunItemsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(RunItemsBuilder, RunItemsBuilder) - Method in interface nxopen.routing.RunItemsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.ScCollectorList
-
Exchanges the position of two objects inside the list.
- swap(ScCollector, ScCollector) - Method in interface nxopen.ScCollectorList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.SectionList
-
Exchanges the position of two objects inside the list.
- swap(Section, Section) - Method in interface nxopen.SectionList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.sim.KinematicChainList
-
Exchanges the position of two objects inside the list.
- swap(KinematicChain, KinematicChain) - Method in interface nxopen.sim.KinematicChainList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Exchanges the position of two objects inside the list.
- swap(KinematicChannelBuilder, KinematicChannelBuilder) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(KinematicJunctionBuilder, KinematicJunctionBuilder) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.TaggedObjectList
-
Exchanges the position of two objects inside the list.
- swap(TaggedObject, TaggedObject) - Method in interface nxopen.TaggedObjectList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(SelectReuseLibraryListItemBuilder, SelectReuseLibraryListItemBuilder) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(ShimInnerProfileSetBuilder, ShimInnerProfileSetBuilder) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.weld.JointItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(JointItemBuilder, JointItemBuilder) - Method in interface nxopen.weld.JointItemBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(JointmarkFaceSetsBuilder, JointmarkFaceSetsBuilder) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Exchanges the position of two objects inside the list.
- swap(JointmarkGuideBuilder, JointmarkGuideBuilder) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(JointmarkPointsBuilder, JointmarkPointsBuilder) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Exchanges the position of two objects inside the list.
- swap(WeldBeadPathBuilder, WeldBeadPathBuilder) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Exchanges the position of two objects inside the list.
- swap(WeldBeadSizeBuilder, WeldBeadSizeBuilder) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Exchanges the position of two objects inside the list.
- swap(int, int) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Exchanges the position of two objects inside the list.
- swap(WeldFillStripBuilder, WeldFillStripBuilder) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Exchanges the position of two objects inside the list.
- SWAP_ENDS - Static variable in class nxopen.cae.ElementConnectivityBuilder.Methods
-
Swap the nodes of a 2-noded element
- swapAnchorEnd() - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- swapAnchorSegment() - Method in interface nxopen.routing.EditBendAngleBuilder
-
Swap the free and anchor segments.
- swapConnectionSourceTarget(NXObject[]) - Method in interface nxopen.ame.DiagramManager
-
Swap source target for ame connections
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SwapDiagonalBuilder - Interface in nxopen.cae
-
- swapPoints(int, int) - Method in interface nxopen.motion.SplineBeamBuilder
-
Swaps two points
License requirements: mechanisms ("MECHANISMS")
.
- swapProfile() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the profile swap flag.
- swapProfile() - Method in interface nxopen.routing.StockBuilder
-
Returns the profile swap flag.
- swapSegment(SegmentBuilder, SegmentBuilder) - Method in interface nxopen.motion.RoadBuilder
-
Swap two segments
License requirements: mechanisms ("MECHANISMS")
.
- swapUandV() - Method in interface nxopen.SurfaceUVDirectionBuilder
-
Returns the swap u and v directions option.
- SWARF_BASE_UV - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Align to U or V parameter line
- SWARF_CUT_WALL - Static variable in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
-
One pass End Mill.
- SWARF_CUT_WALL - Static variable in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
-
One pass End Mill.
- SWARF_CUT_WALL_AND_FLOOR - Static variable in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
-
Two pass End Mill.
- SWARF_CUT_WALL_AND_FLOOR - Static variable in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
-
Two pass End Mill.
- SWARF_DRIVE - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Swarf Drive
- swarfGougeCheck() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the swarf gouge check
License requirements: None.
- swarfTiltAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Swarf Tilt Angle
License requirements: None.
- sweep() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the sweep of the Scan Helix
License requirements: None.
- SWEEP - Static variable in class nxopen.cam.InspectionMethodBuilder.UVModeTypes
-
Start angle and sweep angle
- sweep() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the sweep of the Scan Helix
License requirements: None.
- sweep - Variable in class nxopen.cam.UdtSectionBuilder.Data
-
the sweep
- SWEEP_ANGLE - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanHelixTurnTypes
-
Sweep Angle
- SWEEP_INQUIRE_ERROR - Static variable in class nxopen.uf.UFConstants
-
- SWEEP_SOLID - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Sweep mesh solid
- SWEEP_SOLID_WEDGE - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Sweep mesh solid with wedges
- SWEEP_SURFACE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Swept surface
- SWEEP_TRIM_BETW_TWO_FACES - Static variable in class nxopen.uf.UFModl.SweepTrimSigns
-
- SWEEP_TRIM_NONE - Static variable in class nxopen.uf.UFModl.SweepTrimSigns
-
- SWEEP_TRIM_TO_ALL - Static variable in class nxopen.uf.UFModl.SweepTrimSigns
-
- SWEEP_TRIM_TO_FACE - Static variable in class nxopen.uf.UFModl.SweepTrimSigns
-
- sweepabilityCheck() - Method in interface nxopen.Body
-
Sweepability check
License requirements: solid_modeling ("SOLIDS MODELING")
.
- SweepAlongGuide - Interface in nxopen.features
-
Represents a sweep along guide feature
To create or edit an instance of this class, use
SweepAlongGuideBuilder
Created in NX6.0.0
- SweepAlongGuideBuilder - Interface in nxopen.features
-
- sweepAngle() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
Returns the sweep angle
License requirements: None.
- sweepAngle() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the sweep
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- SweepBetweenMeshBuilder - Interface in nxopen.cae
-
- SweepBetweenMeshBuilder.Types - Class in nxopen.cae
-
Deprecated.
creation type
- sweepFeatureCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the Sweep-like features collection belonging to this part .
- SweepFeatureCollection - Interface in nxopen.features
-
Manages sweep-like features.
- sweepOrientation() - Method in interface nxopen.features.SweptVolumeBuilder
-
Returns the sweep orientation
License requirements: None.
- sweepSide() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Returns the projection direction of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- SweepTrimObject() - Constructor for class nxopen.uf.UFModl.SweepTrimObject
-
- SweepTrimObject(Tag[], int, UFModl.SweepTrimSigns, Tag[], int) - Constructor for class nxopen.uf.UFModl.SweepTrimObject
-
- sweepType() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Returns the projection side of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- SWELLING - Static variable in class nxopen.cae.DurSpecialistBlockLoadEventBuilder.PatternType
-
between 0 and value
- SWEPT - Static variable in class nxopen.Face.FaceType
-
Swept face
- SWEPT - Static variable in class nxopen.features.EmbossSidewall.SidewallMethod
-
Indicates method to create sidewalls that are swept.
- SWEPT - Static variable in class nxopen.features.FaceBlendBuilder.Type
-
- Swept - Interface in nxopen.features
-
Represents a swept feature
To create or edit an instance of this class, use
SweptBuilder
Created in NX5.0.0
- SWEPT - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType
-
Swept
- SWEPT - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TransitionSurfaceType
-
Swept transition surface
- sweptbodies - Variable in class nxopen.motion.PostProcess.CreateEnvelopeData
-
The resulting swept bodies
- SweptBuilder - Interface in nxopen.features
-
- SweptBuilder.InterpolationOptions - Class in nxopen.features
-
This enum represents the Interpolation option.
- SweptBuilder.SectionLocationTypes - Class in nxopen.features
-
This enum represents the Section Location option.
- SweptMesh - Interface in nxopen.cae
-
Represents swept Mesh
To create or edit an instance of this class, use
Mesh3dHexBuilder
Created in NX6.0.0
- SweptVolume - Interface in nxopen.features
-
Represents a swept volume feature
To create or edit an instance of this class, use
SweptVolumeBuilder
Created in NX9.0.0
- SweptVolumeBuilder - Interface in nxopen.features
-
- SweptVolumeBuilder.SweepOrient - Class in nxopen.features
-
These represent the type of Sweep Orientation feature to be created
- swingAngle() - Method in interface nxopen.cam.NcmEngRetBuilder
-
Returns the engage/retract swing angle
License requirements: None.
- swingAngle() - Method in interface nxopen.cam.NcmLaserEngage
-
Returns the Swing Angle
License requirements: None.
- swingAngle() - Method in interface nxopen.cam.NcmLaserRetract
-
Returns the Swing Angle
License requirements: None.
- swingAngle() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract swing angle
License requirements: None.
- swingAngle() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the engage/retract swing angle
License requirements: None.
- SWITCH_ALL - Static variable in class nxopen.uf.UFSf.NodeSwitch
-
- SWITCH_IN_INTERIOR - Static variable in class nxopen.uf.UFSf.NodeSwitch
-
- SWITCH_ON_BOUNDARY - Static variable in class nxopen.uf.UFSf.NodeSwitch
-
- SWITCH_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Switch reason
- switchDrivers() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Switch the order of the two drivers.
- switchHandler(StylerEvent) - Method in interface nxopen.uistyler.TabControl.SwitchHandler
-
Called when a user switches tabs.
- switchHoleFillType() - Method in interface nxopen.facet.FillHoleBuilder
-
Switches boundary edge mapping based on the filling type (holes, island, bridge)
When filling holes or islands, each hole is defined by a polyline.
- switchLabelLocationX() - Method in interface nxopen.display.PlanarShipGridBuilder
-
Switch label location in X direction.
- switchLabelLocationY() - Method in interface nxopen.display.PlanarShipGridBuilder
-
Switch label location in Y direction.
- switchLabelLocationZ() - Method in interface nxopen.display.PlanarShipGridBuilder
-
Switch label location in Z direction.
- switchLayerLayout(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Switch Layer and Layout
License requirements: cam_base ("CAM BASE")
.
- switchMaterialSide1 - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- switchMaterialSide2 - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- switchMountingOrientation(AMEEngObject) - Method in interface nxopen.ame.DiagramManager
-
Switch Mounting Orientation of the input
AMEEngObject
object.
- switchParentFlag - Variable in class nxopen.uf.UFModl.SmcornerData
-
- switchRegion() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Switch the region to be snipped indicated by the region point.
- switchScenarios(String, String) - Method in interface nxopen.uf.UFSf
-
- switchSegmentTable(CamProfile) - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Switch segments table object.
- switchSide() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
- switchSide() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the indication whether the side of the ship structure should be switched.
- switchSide() - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder
-
Returns the flag indicating if the mirror side should be switched
License requirements: None.
- switchStartEnd() - Method in interface nxopen.routing.OverstockBuilder
-
Returns the path direction that defines the start of overstock assignment.
- switchToPartinglineLayer() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Make parting layer as the work layer.
- switchTrimSide() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the indicator if the trim side should be switched from the default for the sheet metal.
- switchTrimSide() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Switch trim side.
- switchView(UFUiOnt.TreeMode) - Method in interface nxopen.uf.UFUiOnt
-
- switchXYAxis() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D
-
Switches the X/Y axis
License requirements: None.
- SWStatusItem - Interface in nxopen.ame
-
Represents SW Status Item
.
- SX_ASSY_XHATCH_OFF - Static variable in class nxopen.uf.UFDraw.SxAssyXhatch
-
- SX_ASSY_XHATCH_ON - Static variable in class nxopen.uf.UFDraw.SxAssyXhatch
-
- SX_BACKGROUND_OFF - Static variable in class nxopen.uf.UFDraw.SxBackground
-
- SX_BACKGROUND_ON - Static variable in class nxopen.uf.UFDraw.SxBackground
-
- SX_CROSSHATCH_OFF - Static variable in class nxopen.uf.UFDraw.SxCrosshatch
-
- SX_CROSSHATCH_ON - Static variable in class nxopen.uf.UFDraw.SxCrosshatch
-
- SX_SECTION_SHEET_BODY_OFF - Static variable in class nxopen.uf.UFDraw.SxSectionSheetBody
-
- SX_SECTION_SHEET_BODY_ON - Static variable in class nxopen.uf.UFDraw.SxSectionSheetBody
-
- sxAssyXhatch - Variable in class nxopen.uf.UFDraw.SxviewPrfs
-
- sxBackground - Variable in class nxopen.uf.UFDraw.SxviewPrfs
-
- sxCrosshatch - Variable in class nxopen.uf.UFDraw.SxviewPrfs
-
- sxedgeTags - Variable in class nxopen.uf.UFDraw.AskSxedgesOfSxsolidData
-
- SXLINE_LEG1 - Static variable in class nxopen.uf.UFDraw.SxlineLeg
-
- SXLINE_LEG2 - Static variable in class nxopen.uf.UFDraw.SxlineLeg
-
- SXLINE_ROTPT_LOST_ASSOC - Static variable in class nxopen.uf.UFDraw.SxlineStatus
-
- SXLINE_ROTPT_OR_SXSEG_LOST_ASSOC - Static variable in class nxopen.uf.UFDraw.SxlineStatus
-
- SXLINE_SXSEG_LOST_ASSOC - Static variable in class nxopen.uf.UFDraw.SxlineStatus
-
- sxlineDisplay - Variable in class nxopen.uf.UFDraw.AskSxlineDefaultPrfsData
-
- sxlineDisplay - Variable in class nxopen.uf.UFDraw.AskSxlineDisplayData
-
- sxlineStatus - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData
-
- sxlineStatus - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData
-
- sxlineStatus - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- sxlineStatus - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- sxlineStatus - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData
-
- sxlineStatus - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData
-
- sxlineStatus - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData
-
- SxlineSxsegs() - Constructor for class nxopen.uf.UFDraw.SxlineSxsegs
-
- SxlineSxsegs(UFDraw.SxsegType, UFDrf.Object, double) - Constructor for class nxopen.uf.UFDraw.SxlineSxsegs
-
- sxlineType - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- sxSectionSheetBody - Variable in class nxopen.uf.UFDraw.SxviewPrfs
-
- SXSEG_ARROW - Static variable in class nxopen.uf.UFDraw.SxsegType
-
- SXSEG_BEND - Static variable in class nxopen.uf.UFDraw.SxsegType
-
- SXSEG_CUT - Static variable in class nxopen.uf.UFDraw.SxsegType
-
- sxsegAngle - Variable in class nxopen.uf.UFDraw.SxlineSxsegs
-
- sxsegAngle - Variable in class nxopen.uf.UFDraw.SxsegInfo
-
- sxsegInfo - Variable in class nxopen.uf.UFDraw.AskSxlineSxsegData
-
- SxsegInfo() - Constructor for class nxopen.uf.UFDraw.SxsegInfo
-
- SxsegInfo(UFDraw.SxsegType, UFDraw.SxlineLeg, UFDraw.SxsegMode, UFDraw.SxsegHighlight, double) - Constructor for class nxopen.uf.UFDraw.SxsegInfo
-
- sxsegMode - Variable in class nxopen.uf.UFDraw.SxsegInfo
-
- sxsegObject - Variable in class nxopen.uf.UFDraw.SxlineSxsegs
-
- sxsegTags - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData
-
- sxsegTags - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData
-
- sxsegTags - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- sxsegTags - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- sxsegTags - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData
-
- sxsegTags - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData
-
- sxsegTags - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData
-
- sxsegType - Variable in class nxopen.uf.UFDraw.SxlineSxsegs
-
- sxsegType - Variable in class nxopen.uf.UFDraw.SxsegInfo
-
- sxsolidTags - Variable in class nxopen.uf.UFDraw.AskSxsolidsOfSxviewData
-
- SxviewPrfs() - Constructor for class nxopen.uf.UFDraw.SxviewPrfs
-
- SxviewPrfs(UFDraw.SxSectionSheetBody, UFDraw.SxBackground, UFDraw.SxCrosshatch, UFDraw.SxAssyXhatch, double) - Constructor for class nxopen.uf.UFDraw.SxviewPrfs
-
- sxviewTags - Variable in class nxopen.uf.UFDraw.AskFoldedSxlineData
-
- sxviewTags - Variable in class nxopen.uf.UFDraw.AskHalfSxlineData
-
- sxviewTags - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- sxviewTags - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- sxviewTags - Variable in class nxopen.uf.UFDraw.AskSimpleSxlineData
-
- sxviewTags - Variable in class nxopen.uf.UFDraw.AskSteppedSxlineData
-
- sxviewTags - Variable in class nxopen.uf.UFDraw.AskUnfoldedSxlineData
-
- SY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- SYM_CIRCLE - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_DATUM - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- SYM_DIVCIR - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_DIVHEX - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_DIVSQR - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- SYM_HEXAGON - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_MAXIMUM - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_ROUNDBOX - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_SQUARE - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_TRIDOWN - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_TRIUP - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYM_UNDERLINE - Static variable in class nxopen.uf.UFDrf.IdSymbolType
-
- SYMBOL - Static variable in class nxopen.annotations.ChamferForm
-
C5
- symbol() - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilder
-
Returns the charactersitic
License requirements: None.
- SYMBOL - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.EntityType
-
Custom Symbol
- symbol() - Method in interface nxopen.annotations.LineWeldSideData
-
Returns the elementary weld symbol
License requirements: None.
- symbol() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the symbol type specifies the balloon type used to call out members
License requirements: None.
- symbol() - Method in interface nxopen.annotations.ReplaceSymbolBuilder
-
Returns the symbol
License requirements: None.
- symbol() - Method in interface nxopen.annotations.SmashCustomSymbolBuilder
-
Returns the selected symbol instance
License requirements: None.
- Symbol - Class in nxopen.annotations
-
Specifies the elementary weld symbol
- SYMBOL - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepDisplayStyle
-
Display alternate rep symbol when when in alt rep
- symbol - Variable in class nxopen.diagramming.tables.SizedSymbol
-
The symbol
- SYMBOL - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType
-
- SYMBOL - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies a character set of symbols
- SYMBOL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum
-
- Symbol() - Constructor for class nxopen.mechatronics.SymbolTableBuilder.Symbol
-
- Symbol(String, SymbolTableBuilder.IOType, SymbolTableBuilder.DataType, String, String) - Constructor for class nxopen.mechatronics.SymbolTableBuilder.Symbol
-
Constructor for the Symbol object.
- symbol() - Method in interface nxopen.Unit
-
Returns the symbol for a unit
License requirements: None.
- symbol2D() - Method in interface nxopen.pid.LibraryAuthoringBuilder
-
Returns the symbol 2D sub-builder.
- Symbol2DBuilder - Interface in nxopen.diagramminglibraryauthor
-
Represents a Symbol2DBuilder.
- symbol3D() - Method in interface nxopen.pid.LibraryAuthoringBuilder
-
Returns the symbol 3D sub-builder.
- Symbol3DBuilder - Interface in nxopen.diagramminglibraryauthor
-
Represents a Symbol3DBuilder.
- SYMBOL_NAME_SIZE - Static variable in class nxopen.uf.UFConstants
-
- SYMBOL_STRUCTURE - Static variable in class nxopen.ame.AmeDebugSession.NavigatorType
-
Symbol Structure Navigator
- SYMBOL_TYPE_ID_SYMBOL_CIRCLE - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_DIV_CIRCLE - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_DIV_HEXAGON - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_DIV_SQUARE - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_DOWN_TRIANGLE - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_HEXAGON - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_QUAD_CIRCLE - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_ROUNDED_BOX - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_SQUARE - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_UNDERLINE - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_ID_SYMBOL_UP_TRIANGLE - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- SYMBOL_TYPE_NONE - Static variable in class nxopen.uf.UFPlist.SymbolType
-
- symbolAngle() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the user defined symbol angle with baseline, if the symbol is not aligned with
the baseline
License requirements: None.
- symbolAngle() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the symbol angle in degress with respect to the baseline.
- symbolAnnotationAnchor() - Method in interface nxopen.ame.SymbolAnnotationBuilder
-
Returns the anchor
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SymbolAnnotationBuilder - Interface in nxopen.ame
-
- SymbolAnnotationBuilder.Anchor - Class in nxopen.ame
-
Represents anchor of annotation
- SymbolAnnotationBuilder.Orientation - Class in nxopen.ame
-
Represents orientation of annotation
- symbolAnnotationHeight() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Returns the symbol annotation text height
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- symbolAnnotationOrientation() - Method in interface nxopen.ame.SymbolAnnotationBuilder
-
Returns the orientation
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- symbolAnnotationPoint() - Method in interface nxopen.ame.SymbolAnnotationBuilder
-
Returns the symbol annotation point
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- symbolAnnotationPoint() - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Returns the symbol annotation point
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- SymbolAnnotationSettingsBuilder - Interface in nxopen.ame
-
- symbolAnnotationTextAlignment() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Returns the symbol annotation text alignment
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- symbolAnnotationTextCFW() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Returns the symbol annotation text color font width
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- symbolAnnotationTextOverlined() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Returns whether the symbol annotation text is overlined
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- symbolAnnotationTextUnderlined() - Method in interface nxopen.ame.SymbolAnnotationSettingsBuilder
-
Returns whether the symbol annotation text is underlined
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- symbolAspectRatio - Variable in class nxopen.annotations.Lettering
-
Symbol aspect ratio (this only applies to symbols when using standard fonts)
This value controls the aspect ratio of text control sequences such as the
diameter symbol (represented by the <O> text control sequence), the
counterbore symbol (represented by the <#C> text control sequence), the
degree symbol (represented by the <$s> text control sequence), the true
position symbol (represented by the <&10> text control sequence), etc.
- symbolAspectRatio() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the user defined symbol aspect ratio
License requirements: None.
- symbolAspectRatio() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the symbol aspect ratio
License requirements: None.
- symbolAspectRatio() - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
- symbolaspectratio - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- SymbolAuthoringBuilder - Interface in nxopen.ame
-
- SymbolAuthoringBuilder.Types - Class in nxopen.ame
-
Represents the type of symbol
- symbolAutoUpdate() - Method in interface nxopen.annotations.SymbolWorkflowBuilder
-
Returns the symbol auto update determines whether or not unlocked, associative custom symbol instances update automatically
License requirements: None.
- SymbolCatalogBuilder - Interface in nxopen.annotations
-
Represents a builder to instantiate a symbol from a parameterized family of standard
symbols defined in catalogs, e.g. for standard fasteners.
- SymbolCatalogParameterBuilder - Interface in nxopen.annotations
-
- SymbolCatalogParameterBuilderList - Interface in nxopen.annotations
-
Represents a list of objects.
- symbolCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- SymbolConnection() - Constructor for class nxopen.uf.UFDrf.SymbolConnection
-
- SymbolConnection(UFDrf.SymbolConnectionType, Tag) - Constructor for class nxopen.uf.UFDrf.SymbolConnection
-
- SymbolCreateData() - Constructor for class nxopen.uf.UFDrf.SymbolCreateData
-
- SymbolCreateData(String, double, double, double, Tag) - Constructor for class nxopen.uf.UFDrf.SymbolCreateData
-
- symbolData - Variable in class nxopen.uf.UFDrf.ArcInfo
-
- symbolData - Variable in class nxopen.uf.UFDrf.AskWeldSymbolData
-
- symbolData - Variable in class nxopen.uf.UFDrf.DraftAidLine
-
- SymbolData() - Constructor for class nxopen.uf.UFDrf.SymbolData
-
- SymbolData(double[], double[], double, double, double, Tag) - Constructor for class nxopen.uf.UFDrf.SymbolData
-
- SymbolFile - Interface in nxopen.annotations
-
Represents a symbolFile
To create or edit an instance of this class, use
SymbolFileBuilder
Created in NX8.0.0
- SymbolFileBuilder - Interface in nxopen.annotations
-
- SymbolFileCollection - Interface in nxopen.annotations
-
- symbolFiles() - Method in interface nxopen.annotations.AnnotationManager
-
Library Symbol collection .
- symbolFont - Variable in class nxopen.annotations.AnnotationManager.LoadSymbolFontFromSbfFileData
-
- symbolFont() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- SymbolFont - Interface in nxopen
-
- symbolFontFile() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the symbol font file setting.
- symbolFontTag - Variable in class nxopen.uf.UFDrf.SymbolData
-
- symbolHeight - Variable in class nxopen.annotations.AnnotationManager.LoadSymbolFontFromSbfFileData
-
- symbolHeight() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the user defined symbol height
License requirements: None.
- symbolHeight() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the symbol height
License requirements: None.
- symbolHeight() - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
- symbolHeight - Variable in class nxopen.uf.UFDrf.SymbolInstance
-
- SYMBOLIC - Static variable in class nxopen.cae.Result.SuperElementRep
-
- SYMBOLIC_REFERENCE - Static variable in class nxopen.ame.PlcRule.Type
-
- SYMBOLIC_THREAD - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype
-
- symbolicDisplay - Variable in class nxopen.uf.UFPd.ProductAttribute
-
- symbolicDisplay - Variable in class nxopen.uf.UFPd.ProductAttribute2
-
- symbolId() - Method in interface nxopen.pid.EquipmentBuilder
-
Returns the symbol ID of this equipment.
- symbolId() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the symbol ID of this port equipment.
- symbolInfo - Variable in class nxopen.uf.UFDrf.AskSymbolDataFromNameData
-
- SymbolInstance() - Constructor for class nxopen.uf.UFDrf.SymbolInstance
-
- SymbolInstance(Tag, boolean, double[], double, double, double, int, int, int, boolean, boolean) - Constructor for class nxopen.uf.UFDrf.SymbolInstance
-
- symbolLeaderTerminatorCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- symbolLength() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the user defined symbol length
License requirements: None.
- symbolLength() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the symbol length
License requirements: None.
- symbolLength() - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
- symbolLength - Variable in class nxopen.uf.UFDrf.SymbolInstance
-
- symbolName() - Method in interface nxopen.ame.PlcSymbolBuilder
-
Returns the string symbol name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- symbolName() - Method in interface nxopen.annotations.BaseCustomSymbol
-
Returns the symbol name.
- symbolName() - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Returns the symbol name
License requirements: None.
- symbolName() - Method in interface nxopen.annotations.MasterCustomSymbolData
-
- symbolName() - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Returns the JA method support for accessing and setting Symbol Name value
License requirements: None.
- symbolName() - Method in interface nxopen.annotations.ReplaceSymbolBuilder
-
Returns the symbol name
License requirements: None.
- symbolName() - Method in interface nxopen.annotations.SymbolCatalogBuilder
-
Returns the name of the symbol.
- symbolName - Variable in class nxopen.uf.UFDrf.AskEmbeddedUdsFontInfoData
-
- symbolName - Variable in class nxopen.uf.UFDrf.ChamferDimensionData
-
- symbolName - Variable in class nxopen.uf.UFDrf.SymbolCreateData
-
- symbolNames - Variable in class nxopen.uf.UFDrf.AskSymbolDataFromNameData
-
- symbolOriginCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- symbolPath() - Method in interface nxopen.annotations.ReplaceSymbolBuilder
-
Returns the symbol path
License requirements: None.
- symbolPlacement() - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Returns the symbol placement
License requirements: None.
- symbolPlacement() - Method in interface nxopen.annotations.DiameterRadiusPreferences
-
Returns the diameter/radius symbol placement relative to the dimension text
License requirements: None.
- SymbolPreferences - Interface in nxopen.annotations
-
Represents symbol preferences .
- symbolPreferences() - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
Returns the symbol preferences
License requirements: None.
- SymbolPreferences() - Constructor for class nxopen.uf.UFDrf.SymbolPreferences
-
- SymbolPreferences(double, UFDrf.Cfw, UFDrf.Cfw, UFDrf.Cfw, UFDrf.Cfw, UFDrf.Cfw, UFDrf.Cfw) - Constructor for class nxopen.uf.UFDrf.SymbolPreferences
-
- symbolPreferencesOption() - Method in interface nxopen.annotations.CustomSymbolData
-
- SymbolPreferencesOption - Class in nxopen.annotations
-
Specifies the custom symbol preferences for the following -
Crosshatch
Area fill
Color, font and line width
This option is only available when creating.
- symbolRepresentationType() - Method in interface nxopen.ame.Manage2dSymbolsBuilder
-
- symbolRetainedStatusCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- SymbolRoot - Interface in nxopen.ame
-
Symbol Root Node class
This object does not need a creator.
- symbolRule() - Method in interface nxopen.drafting.RulesBuilder
-
Returns the symbol rule
License requirements: None.
- SYMBOLS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Symbols Report Filter
- SYMBOLS_LEADER_TERMINATOR - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Symbols Leader Terminator Report Filter
- SYMBOLS_ORIGIN - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Symbols Origin Report Filter
- SYMBOLS_RETAINED_STATUS - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Symbols Retained Status Report Filter
- SYMBOLS_TEXT - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Symbols Text Report Filter
- symbolScale() - Method in interface nxopen.annotations.LineWeldData
-
Returns the symbol scale
License requirements: None.
- symbolScale() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the user defined symbol scale
License requirements: None.
- symbolScale() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the symbol scale
License requirements: None.
- symbolScale() - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
- SymbolsData() - Constructor for class nxopen.annotations.ForeshorteningSymbolBuilder.SymbolsData
-
- symbolSize() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- symbolSize() - Method in interface nxopen.preferences.PartVisualizationLine
-
Returns the symbol size.
- symbolSize - Variable in class nxopen.uf.UFDisp.SystemParams
-
- symbolSizeMethod() - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
Returns the method in which embedded user-defined symbols are scaled
License requirements: None.
- symbolSmashToSketch() - Method in interface nxopen.annotations.SymbolWorkflowBuilder
-
Returns the symbol smash to sketch specifies if curve objects in symbols are added to a sketch on custom symbol smash
License requirements: None.
- SymbolSourceOption - Class in nxopen.pid
-
Represents the symbol source options.
- symbolSourceType() - Method in interface nxopen.pid.EquipmentBuilder
-
Returns the symbol source type
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
- symbolSourceType() - Method in interface nxopen.pid.PortEquipmentBuilder
-
Returns the symbol source type
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
- symbolStandard - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- symbolStyle() - Method in interface nxopen.annotations.StyleBuilder
-
Returns the symbol style builder
License requirements: None.
- SymbolStyleBuilder - Interface in nxopen.annotations
-
- SymbolStyleBuilder.FcfTextUnderlineOption - Class in nxopen.annotations
-
Represents the option to underline the additional FCF text
- SymbolTable - Interface in nxopen.mechatronics
-
Represents the SymbolTable class
SymbolTable contains Symbols that are used for Signal creation.
- SymbolTableBuilder - Interface in nxopen.mechatronics
-
- SymbolTableBuilder.DataType - Class in nxopen.mechatronics
-
Represents the data type.
- SymbolTableBuilder.IOType - Class in nxopen.mechatronics
-
Represents the IO type.
- SymbolTableBuilder.Symbol - Class in nxopen.mechatronics
-
Represents Symbol definition structure.
- SymbolTableCollection - Interface in nxopen.mechatronics
-
Represents a collection of SymbolTable.
- symbolTables() - Method in interface nxopen.mechatronics.PhysicsManager
-
- symbolTextCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- symbolToDimensionTextDistance() - Method in interface nxopen.annotations.RadialStyleBuilder
-
Returns the symbol to dimension text distance in character spaces
License requirements: None.
- symbolToDimensionTextDistance - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- symbolType() - Method in interface nxopen.annotations.IdSymbolBuilder
-
- symbolType() - Method in interface nxopen.annotations.ImportAutocadBlockBuilder
-
Returns the Symbol type.
- symbolType() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- symbolType - Variable in class nxopen.uf.UFDrf.ChamferDimensionData
-
- symbolType - Variable in class nxopen.uf.UFPlist.Prefs
-
- symbolType() - Method in interface nxopen.weld.JointExitBuilder
-
Returns the symbol to override the symbol computed from the joint parameters, if
Symbol
is not
Symbol.NONE
.
- symbolWidth - Variable in class nxopen.annotations.AnnotationManager.LoadSymbolFontFromSbfFileData
-
- symbolWidth() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- symbolWorkflow() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the SymbolWorkflow builder
License requirements: None.
- SymbolWorkflowBuilder - Interface in nxopen.annotations
-
- SymbThreadData() - Constructor for class nxopen.uf.UFModl.SymbThreadData
-
- SymbThreadData(Tag, Tag, double[], int, int, int, int, int, String, String, String, String, String, String, String, String, String, boolean) - Constructor for class nxopen.uf.UFModl.SymbThreadData
-
- symfont - Variable in class nxopen.uf.UFDrf.OrddispInfo
-
- symInfoBottom - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- symInfoTop - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- SYMM - Static variable in class nxopen.cae.LaminatePlyGroup.Link
-
symmetric layup
- SYMMETRIC - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies symmetric characteristics
- SYMMETRIC - Static variable in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType
-
Symmetric
- SYMMETRIC - Static variable in class nxopen.ExtrudeTaperDataTaperType
-
Symmetric taper
- SYMMETRIC - Static variable in class nxopen.features.AeroFlangeBuilder.ThicknessDimensionOptions
-
- SYMMETRIC - Static variable in class nxopen.features.AeroFlangeBuilder.WidthDimensionOptions
-
- SYMMETRIC - Static variable in class nxopen.features.AeroRibBuilder.HeightDimensionOptions
-
- SYMMETRIC - Static variable in class nxopen.features.AeroRibBuilder.ThicknessDimensionOptions
-
- SYMMETRIC - Static variable in class nxopen.features.LawExtensionBuilder.OppositeSideExtensionOptions
-
Symmetric extension
- SYMMETRIC - Static variable in class nxopen.features.LawExtensionBuilderEx.OppositeSideExtensionOptions
-
Symmetric extension
- SYMMETRIC - Static variable in class nxopen.features.RibBuilder.RibThicknessOffsetOptions
-
Symmetric Offset
- SYMMETRIC - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperSides
-
Symmetric.
- SYMMETRIC - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.WidthOptions
-
Bridge Transition starts at specified point on start edge and extends on either side by half the specified distance.
- SYMMETRIC - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions
-
- SYMMETRIC - Static variable in class nxopen.features.sheetmetal.GussetBuilder.WidthSides
-
The Gusset will be created on both sides of the plane of the user defined profile.
- SYMMETRIC - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthSideOptions
-
Material removed in both directions equally.
- SYMMETRIC - Static variable in class nxopen.features.shipdesign.AlongGuideCutBuilder.WaterStopOffsetMethod
-
The left offset and right offset are symmetric
- SYMMETRIC - Static variable in class nxopen.features.shipdesign.PillarBuilder.CapOptions
-
- SYMMETRIC - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndCutTypes
-
The same end cut is applied to both ends
- SYMMETRIC - Static variable in class nxopen.features.shipdesign.PlateStockBuilder.ThickenOptions
-
Half of the thickness is applied to back and front sides of the offset mold face.
- SYMMETRIC - Static variable in class nxopen.features.shipdesign.ProfileBuilder.EndCutOption
-
- SYMMETRIC - Static variable in class nxopen.features.shipdesign.SteelSupportBuilder.CapOptions
-
- SYMMETRIC - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.EndCutTypes
-
The same end cut is applied to both ends
- Symmetric - Interface in nxopen.features
-
Represents a symmetric feature.
- SYMMETRIC - Static variable in class nxopen.geometricutilities.Extend.ExtendType
-
- SYMMETRIC - Static variable in class nxopen.geometricutilities.ExtensionSide
-
Extension Side Symmetric
- SYMMETRIC - Static variable in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType
-
Draft on both sides of the profile using the same angle
- SYMMETRIC - Static variable in class nxopen.motion.TirePropertyTnoBuilder.TireSideType
-
- SYMMETRIC - Static variable in class nxopen.Sketch.AutoDimensioningRule
-
Create Symmetric Dimensions
- SYMMETRIC - Static variable in class nxopen.SketchChamferBuilder.ChamferOptions
-
Symmetric - specify one distance
- SYMMETRIC - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- symmetric - Variable in class nxopen.uf.UFSo.SplineData
-
- SYMMETRIC_OFFSET - Static variable in class nxopen.ExtrudeOffsetDataOffsetType
-
Offset with same distance in both directions
- SYMMETRIC_OFFSET - Static variable in class nxopen.features.ResizeChamferBuilder.SectionType
-
- SYMMETRIC_OFFSET - Static variable in class nxopen.geometricutilities.Type
-
Offset with same distance in both directions
- SYMMETRIC_OFFSETS - Static variable in class nxopen.features.ChamferBuilder.ChamferOption
-
Symmetric offsets
- SYMMETRIC_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- SYMMETRIC_WITH_CORE - Static variable in class nxopen.cae.LaminateGlobalLayup.StackingRecipeType
-
Symmetric with core
- SYMMETRICAL_CLINE - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- SymmetricalCenterline - Interface in nxopen.annotations
-
- SymmetricalCenterlineBuilder - Interface in nxopen.annotations
-
Builder for creating Symmetrical Centerline.
- SymmetricalCenterlineBuilder.Types - Class in nxopen.annotations
-
the valid types of Symmetrical Centerline
- SymmetricalCenterlineSettingsBuilder - Interface in nxopen.annotations
-
Represents a Builder for Symmetrical Centerline Settings .
- symmetricalStructure() - Method in interface nxopen.features.shipdesign.SectionEditorBuilder
-
- symmetricalStructure() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the symmetrical structure
License requirements: None.
- symmetricAngle() - Method in interface nxopen.features.DraftBuilder
-
Returns whether draft angles on both sides of the parting reference are symmetric
License requirements: None.
- SymmetricBuilder - Interface in nxopen.features
-
- SymmetricBuilder.PlaneOptions - Class in nxopen.features
-
Represents the plane options.
- symmetricEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add symmetric relation recognition for the last curves added to curve collector
License requirements: None.
- symmetricEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether symmetric relation recognition is enabled
License requirements: None.
- symmetricLoadBendingStressMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum bending stress under two symmetric loads.
- symmetricLoadDisplacement(double, double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the displacement under two symmetric loads.
- symmetricLoadDisplacementMaximum(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum displacement under two symmetric loads.
- symmetricLoadMoment(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the moment under two symmetric loads.
- symmetricLoadMomentMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum moment under two symmetric loads.
- symmetricLoadShearForce(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear force under two symmetric loads.
- symmetricLoadShearForceMaximum(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear force under two symmetric loads.
- symmetricLoadSlope(double, double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the slope under two symmetric loads.
- symmetricLoadSlopeMaximum(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum slope under two symmetric loads.
- symmetricOffsets() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the symmetric offsets toggle.
- symmetricOption() - Method in interface nxopen.geometricutilities.Limits
-
Returns the symmetric option
License requirements: solid_modeling ("SOLIDS MODELING")
.
- symmetricSides() - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
Returns the symmetric sides
License requirements: None.
- SYMMETRY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
symmetry
- SYMMETRY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
symmetry
- SYMMETRY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Symmetry
- symmetry() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the value identifying that the male width is symmetrical about the location and reference direction.
- symmetryOption() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates which symmetric option is
License requirements: None.
- symmetryPlane() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
- symmetryPlane() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the symmetry plane
License requirements: None.
- symmetryPlaneOption() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the symmetry plane option
License requirements: None.
- symmetryPlaneOption() - Method in interface nxopen.features.SymmetricBuilder
-
Returns the symmetry plane option.
- symmetryReference() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns the symmetry line reference
License requirements: None.
- symmetryType() - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition
-
Returns the symmetry link condition type
License requirements: None.
- SYNC - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Sync
- syncArrangements() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
- syncComponentAttrs(boolean) - Method in interface nxopen.routing.Stock
-
Set the characteristics of the given stock's
component so that it has the same characteristics as the
Stock
and its stock data.
- SYNCED - Static variable in class nxopen.layout2d.Layout2dDefinitionStatus
-
- syncFaceNamesAndAttributes() - Method in interface nxopen.cae.FluidDomainRecipe
-
Synchronize the fluid body face names and attributes with the faces of the source polygonal bodies
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- synchroniseOnLoad() - Method in interface nxopen.preferences.SessionPdm
-
Returns the kind of synchronisation performed when a part is loaded
License requirements: None.
- synchroniseOnSave() - Method in interface nxopen.preferences.SessionPdm
-
Returns the kind of synchronisation performed when a part is saved
License requirements: None.
- synchronizationTime() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the time interval to do synchronization with SIMIT
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- SYNCHRONIZE - Static variable in class nxopen.cam.SimulationOptionsBuilder.DialogType
-
synchronize
- SYNCHRONIZE_MANAGER_XTP - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump SynchronizeManagerXtp
- SYNCHRONIZE_UI - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Synchronize UI
- synchronizeArcsFlag() - Method in interface nxopen.cae.FemSynchronizeOptions
-
Returns the synchronize arcs flag
License requirements: None.
- synchronizeAttributes() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Synchronize the attributes on the components
License requirements: None.
- synchronizeConicsFlag() - Method in interface nxopen.cae.FemSynchronizeOptions
-
Returns the synchronize conics flag
License requirements: None.
- synchronizeCoordinateSystemFlag() - Method in interface nxopen.cae.FemSynchronizeOptions
-
Returns the synchronize coordinate system flag
License requirements: None.
- SYNCHRONIZED - Static variable in class nxopen.cam.WedmArcOutputTypeCiBuilder.OutputTypes
-
synchronize for pair of moves
- synchronizeDesignView() - Method in interface nxopen.features.shipdesign.SynchronizeDesignViewBuilder
-
Loops through all selected parts and synchronizes body features from design view to manufacturing view.
- SynchronizeDesignViewBuilder - Interface in nxopen.features.shipdesign
-
This class is used to synchronize body features from design view to manufacturing view.
- synchronizeDisplay() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Synchronize the display on the components
License requirements: None.
- synchronizeLayers() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder
-
Synchronize the layers on the components
License requirements: None.
- synchronizeLinesFlag() - Method in interface nxopen.cae.FemSynchronizeOptions
-
Returns the synchronize lines flag
License requirements: None.
- synchronizeParametersWithProfileBody(TaggedObject) - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Updates the parameters in profile cutout builder using profile body.
- synchronizePointsFlag() - Method in interface nxopen.cae.FemSynchronizeOptions
-
Returns the synchronize points flag
License requirements: None.
- synchronizeRecords(double, AfuMathOperation.InterpolationMode, boolean, String[], int[], AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Synchronize AFU Data Records
License requirements: None.
- synchronizeSectionForValueOrPoint(boolean) - Method in interface nxopen.features.AOCSBuilder
-
Update the section data of Value or Through-Point type.
- synchronizeSections(boolean, Section, Section) - Method in interface nxopen.features.AOCSBuilder
-
Synchronize the second section data consistent to the first one
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- synchronizeSketchCurvesFlag() - Method in interface nxopen.cae.FemSynchronizeOptions
-
Returns the synchronize sketch curves flag
License requirements: None.
- synchronizeSplinesFlag() - Method in interface nxopen.cae.FemSynchronizeOptions
-
Returns the synchronize splines flag
License requirements: None.
- synchronizeSymbol() - Method in interface nxopen.annotations.BaseCustomSymbol
-
Synchronize associative custom symbol.
- synchronizeToPlane(Plane) - Method in interface nxopen.Plane
-
Synchronizes the input
Plane
object's parameters to this plane.
- synchronizeWithCommands() - Method in interface nxopen.report.Report
-
Synchronize the
Report
with commands.
- SYNCHRONOUS - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderVideoType
-
Deprecated.
- synchronousCurveCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the SynchronousCurveCollection instance belonging to this part .
- SynchronousCurveCollection - Interface in nxopen.features
-
This class contains the factory method for creating ST curve builder.
- synchronousEdgeCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the SynchronousEdgeCollection instance belonging to this part .
- SynchronousEdgeCollection - Interface in nxopen.features
-
This class contains the factory method for creating ship feature builder.
- syncOrigin() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the synchroous origin toggle option
License requirements: die_engineering ("DIE ENGINEERING")
.
- syncPartNumber() - Method in interface nxopen.tooling.CloneObject
-
Synchronize the previous number with current.
- syncViews() - Method in interface nxopen.View
-
Returns the "Synchronized Views" toggle state of a view.
- syntaxCheck(String) - Method in interface nxopen.RuleManager
-
Run the syntax check on a dfa file.
- SYS - Static variable in class nxopen.cam.LaserControlPoint.ControlPointTypes
-
sys
- sysDefidenticalPointResolution() - Method in interface nxopen.IgesCreator
-
Returns the sys defidentical point resolution - if set to true then system defined tolerance will be
used to find identical points
License requirements: None.
- sysDefmaxThreeDMdlSpace() - Method in interface nxopen.IgesCreator
-
Returns the sys defmaxThreeDmdl space - if set to true then system defined maximum 3D model
space will be used
License requirements: None.
- SYSLOG - Static variable in class nxopen.sim.SimDebugBuilder.OutputType
-
Output to syslog
- SYSNOISE_DB - Static variable in class nxopen.cae.Result.Filetype
-
- SYSTEM - Static variable in class nxopen.cam.CamPathToolpathEventType
-
- SYSTEM - Static variable in class nxopen.cam.ToolpathEventType
-
- SYSTEM - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Section shape determined by blending neighboring sections.
- SYSTEM - Static variable in class nxopen.routing.ControlPoint.DefinedStatus
-
Created automatically by the application.
- SYSTEM - Static variable in class nxopen.RuleManager.Filter
-
System classes only
- SYSTEM_DEFAULT - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text using the system
default reference point position
- SYSTEM_DEFAULT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text using the system
default reference point position
- SYSTEM_DEFAULT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text using the system default
- SYSTEM_DEFINED_SXSEG - Static variable in class nxopen.uf.UFDraw.SxsegMode
-
- SYSTEM_FUNCTION_CALL - Static variable in class nxopen.ame.PlcRule.Type
-
- SYSTEM_GLOBAL_CALL - Static variable in class nxopen.ame.PlcRule.Type
-
- SYSTEM_KEY - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
This is system key parameter
- SYSTEM_KEY - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
This is system key parameter
- SYSTEM_LOADED - Static variable in class nxopen.RuleManager.Filter
-
System classes that are loaded
- SYSTEM_LOCAL_CALL - Static variable in class nxopen.ame.PlcRule.Type
-
- SYSTEM_PROPERTY - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- SYSTEM_SCENE - Static variable in class nxopen.display.EnvironmentBuilder.ToneMappingTypes
-
- systemColor - Variable in class nxopen.uf.UFDisp.DrawingDisplayData
-
- systemDatatype() - Method in interface nxopen.visualreporting.Property
-
- SYSTEMDEFAULT - Static variable in class nxopen.uf.UFDisp.TextRef
-
- SystemDefinition - Interface in nxopen.routing.electrical
-
- SystemDevice - Interface in nxopen.routing.electrical
-
The Electrical SystemDevice corresponds to a system instance of the
SingleDevice
.
- SystemDeviceCollection - Interface in nxopen.routing.electrical
-
- systemDevices() - Method in interface nxopen.routing.RouteManager
-
SystemDevice collection .
- systemEfficiency - Variable in class nxopen.tooling.SIZERExportBuilder.MCDMechanicalData
-
System Efficiency value
- systemEfficiency - Variable in class nxopen.tooling.SIZERExportBuilder.MechanicalData
-
System Efficiency value
- SystemInfo() - Constructor for class nxopen.uf.UF.SystemInfo
-
- SystemInfo(String, String, String, String, String, String, String, int, String[], int) - Constructor for class nxopen.uf.UF.SystemInfo
-
- SystemObject - Interface in nxopen.mechatronics
-
Represents the System Object.
- SystemObject.AssociateItemData - Class in nxopen.mechatronics
-
- SystemObject.RelationType - Class in nxopen.mechatronics
-
Relation type.
- SystemObject.ReorderType - Class in nxopen.mechatronics
-
Reorder object type to specify the relative position.
- SystemObjectBuilder - Interface in nxopen.mechatronics
-
Represents a
SystemObject
builder
This is an abstract class and cannot be created.
- SystemParams() - Constructor for class nxopen.uf.UFDisp.SystemParams
-
- SystemParams(double, double, double, double, double, double, double, int, int, int, int, int, int, boolean, boolean, int, int, int, boolean, int) - Constructor for class nxopen.uf.UFDisp.SystemParams
-
- systemRename(Expression, String) - Method in interface nxopen.ExpressionCollection
-
Changes the name of the expression without marking system expressions as user expressions.
- SystemRoot - Interface in nxopen.mechatronics
-
Represents the System Root class.
- SystemRoot.Type - Class in nxopen.mechatronics
-
the system root types.
- SZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-