- C - Static variable in class nxopen.ame.InterruptionPointBuilder.Variant
-
- c() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the c
License requirements: None.
- C - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
- C - Static variable in class nxopen.annotations.SizeLetterCode
-
Specifies size letter code "c"
- c() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the c
License requirements: None.
- C - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
-
C
- C - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
-
C
- C - Static variable in class nxopen.cae.FemSignalProcessingSignalAttributes.AcousticalWeightings
-
C
- C - Static variable in class nxopen.cae.responsesimulation.DataLocation.Beam
-
- C - Static variable in class nxopen.cae.responsesimulation.ElementalFunctionEvalBeamLocation
-
- C - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalBeamLocation
-
Stress Recovery point C on a beam cross section
- C - Static variable in class nxopen.cae.SignalProcessingPlotData.AcousticalWeighting
-
C
- C - Static variable in class nxopen.cae.SimLoadRecipeFunctionAttributes.AcousticalWeightings
-
C
- C - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatum
-
C
- C - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatum
-
C
- C - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatum
-
C
- C - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
C-Style
- C - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize
-
17 X 22 inches
- c - Variable in class nxopen.routing.BendReportManager.Mil98Report
-
The distance before the bend, from the start of the cable
to the beginning point of the bend.
- c - Variable in class nxopen.routing.BendReportManager.YbcReport
-
The rotation angle in degrees about the Z axis of the stock.
- c0KnotLineColor() - Method in interface nxopen.preferences.PartModeling
-
Returns the C0 knot line color
License requirements: None.
- c0KnotLineFont() - Method in interface nxopen.preferences.PartModeling
-
Returns the C0 knot line font
License requirements: None.
- c0KnotUseBodyColor() - Method in interface nxopen.preferences.PartModeling
-
Returns whether c0 knot line use body color
License requirements: None.
- c0KnotUseBodyFont() - Method in interface nxopen.preferences.PartModeling
-
Returns whether C0_knot use body font
License requirements: None.
- c1KnotLineColor() - Method in interface nxopen.preferences.PartModeling
-
Returns the C1 knot line color
License requirements: None.
- c1KnotLineFont() - Method in interface nxopen.preferences.PartModeling
-
Returns the C1 knot line font
License requirements: None.
- c1KnotUseBodyColor() - Method in interface nxopen.preferences.PartModeling
-
Returns whether c1 knot line use body color
License requirements: None.
- c1KnotUseBodyFont() - Method in interface nxopen.preferences.PartModeling
-
Returns whether C1_knot use body font
License requirements: None.
- C2 - Static variable in class nxopen.features.MeshTransformerBuilder.ContinuityType
-
C2 continuity
- c2KnotLineColor() - Method in interface nxopen.preferences.PartModeling
-
Returns the C2 knot line color
License requirements: None.
- c2KnotLineFont() - Method in interface nxopen.preferences.PartModeling
-
Returns the C2 knot line font
License requirements: None.
- c2KnotUseBodyColor() - Method in interface nxopen.preferences.PartModeling
-
Returns whether c2 knot line use body color
License requirements: None.
- c2KnotUseBodyFont() - Method in interface nxopen.preferences.PartModeling
-
Returns whether C2_knot use body font
License requirements: None.
- C4 - Static variable in class nxopen.features.MeshTransformerBuilder.ContinuityType
-
C4 continuity
- C7 - Static variable in class nxopen.cam.TurnToolBuilder.ReliefAngleTypes
-
Relief angle type: C (7)
- ca6 - Variable in class nxopen.uf.UFUi.GetInputValuesData
-
- CABINET - Static variable in class nxopen.ame.AmeDebugSession.NavigatorType
-
Cabinet Navigator
- CabinetComponentNode - Interface in nxopen.ame
-
Cabinet Component Node class
This object does not need a creator.
- CabinetDesignBuilder - Interface in nxopen.ame
-
- CabinetNode - Interface in nxopen.ame
-
Cabinet Node class
This object does not need a creator.
- CabinetObject - Interface in nxopen.ame
-
Cabinet Object class
This object does not need a creator.
- CabinetRoot - Interface in nxopen.ame
-
Cabinet Root Node class
This object does not need a creator.
- CabinetRoot.CabinetState - Class in nxopen.ame
-
Represents cabinet state
- CABLE - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Cable connection.
- CABLE - Static variable in class nxopen.positioning.Constraint.Type
-
For internal use only
- CABLE - Static variable in class nxopen.routing.RouteManager.FindObjectType
-
- CABLE_COUPLER - Static variable in class nxopen.uf.UFMotion.JointCouplerType
-
- CABLE_DEFINITION_LINE - Static variable in class nxopen.ame.SymbolAuthoringBuilder.Types
-
- CABLE_DIAGRAM - Static variable in class nxopen.ame.DocumentType
-
- CABLE_DIAGRAM - Static variable in class nxopen.ame.PageBuilder.Types
-
- CABLE_LIST - Static variable in class nxopen.ame.DocumentType
-
- CABLE_LIST - Static variable in class nxopen.ame.PageBuilder.Types
-
- CableConnection - Interface in nxopen.routing.electrical
-
- CableConnectionCollection - Interface in nxopen.routing.electrical
-
- cableConnections() - Method in interface nxopen.routing.RouteManager
-
CableConnection collection .
- CableDefinition - Interface in nxopen.routing.electrical
-
- CableDevice - Interface in nxopen.routing.electrical
-
- cableDirection() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the cable direction.
- cableLocation() - Method in interface nxopen.routing.electrical.CableStockDefinition
-
Returns the cable stock's location
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- cables - Variable in class nxopen.routing.RouteManager.GenerateCablewaysLayoutData
-
- CableStockDefinition - Interface in nxopen.routing.electrical
-
Describes a cable's stock.
- cableTrayArea() - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
Returns the cabletray area expression
License requirements: routing_cabling ("Routing Cabling")
.
- cabletrayHeight() - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
Returns the cabletray height expression
License requirements: routing_cabling ("Routing Cabling")
.
- cableTrayMaximumHeight() - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
Returns the cabletray maximum height expression
License requirements: routing_cabling ("Routing Cabling")
.
- cabletrayWidth() - Method in interface nxopen.routing.electrical.CablewaysBuilder
-
Returns the cabletray width expression
License requirements: routing_cabling ("Routing Cabling")
.
- CablewaysBuilder - Interface in nxopen.routing.electrical
-
- CablewaysLayoutBuilder - Interface in nxopen.routing.electrical
-
- CablewaysLayoutView - Interface in nxopen.routing.electrical
-
Represents the CablewaysLayoutView class.
- CablewaysLayoutView.ViewMatrixAndOriginData - Class in nxopen.routing.electrical
-
- CablewaysLayoutViewCollection - Interface in nxopen.routing.electrical
-
- cablewaysLayoutViews() - Method in interface nxopen.routing.RouteManager
-
Collection for managing Cableways Layout Views.
- CACHED - Static variable in class nxopen.uf.UFWeight.StateType
-
- cacheNcProgram() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the cache nc program
License requirements: None.
- cacheSpreadsheetData() - Method in interface nxopen.features.shipdesign.SteelFeatureSpreadsheetBuilder
-
This method caches parameter data from spreadsheet to the builder.
- cacheState - Variable in class nxopen.uf.UFWeight.Properties
-
- cadCurvatureAbstraction - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- CADENAS - Static variable in class nxopen.tooling.AddReusablePart.ComponentMode
-
cadenas part component
- cadgeometries - Variable in class nxopen.cae.ProjectNodesToCadGeometryBuilder.NodesData
-
- CADModeling - Interface in nxopen.cae
-
The CADModeling class provides method to create
cad face using polygon face
To obtain an instance of this class, refer to
FemPart
Created in NX8.5.0
- cadModeling() - Method in interface nxopen.cae.FemPart
-
Returns the CADModeling instance belonging to this part .
- CADTO_CADCONTACT - Static variable in class nxopen.motion.BodyContactBuilder.ContactTypeOption
-
- CAE_AFU_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_AFU_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_APPPP_DATASOURCE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_APPPP_DATASOURCE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_ASSY_FEM - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a cae assembly fem file new template
- CAE_BEAM_MESH - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 1D cae mesh
- CAE_BOUNDING_VOLUMES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all CAE bounding volumes.
- CAE_BROWSE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_BROWSE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_CONDSEQ_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_CONDSEQ_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_CSV_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_CSV_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_CURVE - Static variable in class nxopen.geometricanalysis.GeometricProperties.Entity
-
CAE Curve
- CAE_DAC_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_DAC_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_EEF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_EEF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_ENTITIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all CAE entities
- CAE_FACE - Static variable in class nxopen.geometricanalysis.GeometricProperties.Entity
-
CAE Face
- CAE_FEM - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a cae fem file new template
- CAE_GEOMETRY - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is any cae geometry
- CAE_LAYOUTSTATE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_LAYOUTSTATE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_MAT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_MAT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_MDF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_MDF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_MESH - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is any cae mesh
- CAE_ODB_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_ODB_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_OP2FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_POINT_MESH - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 0D cae mesh
- CAE_RESULTSESSION_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_RESULTSESSION_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_RPCIII_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_RPCIII_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_RPT_IMG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_RPT_IMG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_RPT_TEMPLATES_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_RPT_TEMPLATES_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_RS2DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_RS2FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_RST_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_RST_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_RST_ODB_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_RST_ODB_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_RST_XDB_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_RST_XDB_ODB_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_SAMCEF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_SAMCEF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_SECTION - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- CAE_SEF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_SEF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_SHELL_MESH - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 2D cae mesh
- CAE_SIM - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a cae sim file new template
- CAE_SOLID_MESH - Static variable in class nxopen.cae.CaeSetGroupFilterType
-
filter type is 3D cae mesh
- CAE_UNV58DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_UNV58FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAE_UNV_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAE_UNV_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAEBody - Interface in nxopen.cae
-
Represents a CAE body geometry
.
- caebodyset - Variable in class nxopen.cae.ModelCheckManager.CheckModelConsistencyData
-
the group constains the failed CAE bodies or new CAE bodies recreated
- CaeBoundingVolumePrimitiveContainment - Class in nxopen.cae
-
Used to specify the containment for the Bounding Volume Primitive.
- CaeBoundingVolumePrimitiveType - Class in nxopen.cae
-
the bounding volume creation method
- CaeCloneManager - Interface in nxopen.pdm
-
- CaeCloneManager.CloneOption - Class in nxopen.pdm
-
Deprecated.
Option for creation of part builder for CAE Clone
- CAEConnection - Interface in nxopen.cae
-
Represents Connection Recipe
To create or edit an instance of this class, use
CAEConnectionBuilder
Created in NX6.0.0
- CAEConnectionBuilder - Interface in nxopen.cae
-
- CAEConnectionBuilder.ConnectionTypeEnum - Class in nxopen.cae
-
the type of connection to be created
- CAEConnectionBuilder.EdgeToEdgeConnectionMethodTypeEnum - Class in nxopen.cae
-
the method of edge to edge connection to be created
- CAEConnectionBuilder.MethodTypeEnum - Class in nxopen.cae
-
the method of connection to be created
- CAEConnectionBuilder.PointToEdgeConnectionMethodTypeEnum - Class in nxopen.cae
-
the method of point to edge connection to be created
- CAEConnectionCollection - Interface in nxopen.cae
-
Provides method for creating builder for
connection operation commands in a fem/afem part
To obtain an instance of this class, refer to
BaseFEModel
Created in NX6.0.0
- caeConnections() - Method in interface nxopen.cae.BaseFEModel
-
Returns the connection collector manager belonging to the part .
- CaeCurve() - Constructor for class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
- CaeCurve(double, double, Point3d, Vector3d, Vector3d, Vector3d, Vector3d, Point3d) - Constructor for class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
Constructor for the CaeCurve object.
- caecurve - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurvePropertiesData
-
CAE Edge/Curve Properties
- CaeCurvePropertiesData() - Constructor for class nxopen.geometricanalysis.GeometricProperties.CaeCurvePropertiesData
-
- CaeDataContainer - Interface in nxopen.cae
-
Represents a list of named properties, where the property name is a unique string.
- CaeDOFSet - Interface in nxopen.cae
-
- CaeDOFSetCollection - Interface in nxopen.cae
-
Provides methods for managing DOFSet
CaeDOFSet
To obtain an instance of this class, refer to
SimSimulation
Created in NX7.5.0
- CaeDOFSetDisplay - Interface in nxopen.cae
-
Represents a DOF Set display attributes
.
- caeDOFSets() - Method in interface nxopen.cae.SimSimulation
-
Returns the CAE DOFSet collection belonging to this sim part .
- CAEEdge - Interface in nxopen.cae
-
Represents a CAE edge geometry
.
- caeEdge() - Method in interface nxopen.cae.qualityaudit.FreeEdgeDistanceResult
-
Returns the CAE edge (if present).
- CaeElementAssociatedDataUtilsComponentEnd - Class in nxopen.cae
-
Indicates which translational or rotational degree of freedom to use as component end
- CaeElementAssociatedDataUtilsCsysDataType - Class in nxopen.cae
-
Indicates which type of coordinate system to use if using coordinate system data to orient the material.
- CaeElementAssociatedDataUtilsDof - Class in nxopen.cae
-
Indicates if a rigid element dof is on or off
- CaeElementAssociatedDataUtilsEndReleaseSetting - Class in nxopen.cae
-
Indicates which end release setting to use.
- CaeElementAssociatedDataUtilsEndReleaseState - Class in nxopen.cae
-
Indicates whether to set or clear end release settings.
- CaeElementAssociatedDataUtilsMatOrientationMethod - Class in nxopen.cae
-
Indicates which material orientation method to use.
- CaeElementAssociatedDataUtilsOrientationMethod - Class in nxopen.cae
-
Indicates which orientation method to use
- CaeElementAssociatedDataUtilsVectorChoiceType - Class in nxopen.cae
-
Indicates which vector choice to use.
- CAEFace - Interface in nxopen.cae
-
Represents a CAE face geometry
.
- CaeFace() - Constructor for class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
- CaeFace(Vector3d, double, double, Vector3d, Point3d, Vector3d, Vector3d, Vector3d, Vector3d, Vector3d) - Constructor for class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
Constructor for the CaeFace object.
- caeface - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFacePropertiesData
-
CAE Face Properties
- CaeFacePropertiesData() - Constructor for class nxopen.geometricanalysis.GeometricProperties.CaeFacePropertiesData
-
- CAEFileContainer - Interface in nxopen.pdm
-
This class is a File Container class for uploading JT files created by NX CAE Post Processing to Teamcenter.
- caeGeometryRecipes() - Method in interface nxopen.cae.PolygonGeometryManager
-
Returns the geometry recipes belonging to the FEM.
- CaeGroup - Interface in nxopen.cae
-
- CaeGroupCollection - Interface in nxopen.cae
-
Provides methods for managing set
CaeGroup
To obtain an instance of this class, refer to
CaePart
Created in NX6.0.0
- CaeGroupCollection.AutoGroupErrorCodes - Class in nxopen.cae
-
Contains list of error codes for each auto group type
- CaeGroupCollection.AutoGroupSeedNames - Class in nxopen.cae
-
Contains the prefix seed names to be given to auto created groups by type
If a seed value is passed as NULL, then the auto created groups by that type will be given a default prefix
List of default prefixes are as follows:
MAT- for material_seed
PPT- for ppt_seed
Color- for color_seed
XSECT- for section_seed
LAM- for laminate seed
DIM- for dimension seed
FE_TYPE- for meshcolltype_seed
ACROSS- for connected across assembly component seed
- CaeGroupCollection.AutoGroupTypes - Class in nxopen.cae
-
Contains information about the types by which we do auto grouping
- CaeGroupCollection.CreateAutoGroupsData - Class in nxopen.cae
-
- CaeGroupCollection.EntityType - Class in nxopen.cae
-
Entity type
- CaeGroupElementSubType - Class in nxopen.cae
-
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
- caeGroups() - Method in interface nxopen.cae.CaePart
-
Returns the CAE Group collection belonging to this Part .
- caeInformation(UFSf.ScenarioInfo, int, Tag[], String) - Method in interface nxopen.uf.UFSf
-
- CaeLabel - Interface in nxopen.cae
-
Represents an object that manages annotation for CAE
To obtain an instance of this object use on of the creator in
NoteCollection
.
- CaeNote - Interface in nxopen.cae
-
Represents an object that manages annotation for CAE
To obtain an instance of this object use on of the creator in
NoteCollection
.
- CaeNoteBuilder - Interface in nxopen.cae
-
- caeNoteCollection() - Method in interface nxopen.cae.CaePart
-
Contains a cae note collection.
- CaeObjectType - Interface in nxopen
-
Represent options for CAE selection.
- CaeObjectType.CaeSubType - Class in nxopen
-
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
- CaePart - Interface in nxopen.cae
-
This is an abstract class for NX parts of type .fem and .sim
This is an abstract class
Created in NX5.0.0
- CaePart.FieldApplicationType - Class in nxopen.cae
-
Enumeration which is used to specify the type of field application to retrieve in the GetApplication method.
- caeQueryCurves() - Method in interface nxopen.cae.CaePart
-
Returns the CAE query curve manager belonging to this Part .
- CaeRegion - Interface in nxopen.cae
-
Represents a cae region object.
- CaeRegionBuilder - Interface in nxopen.cae
-
- CaeRegionCollection - Interface in nxopen.cae
-
Provides methods for managing
CaeRegion
in a sim part
To obtain an instance of this class, refer to
SimSimulation
Created in NX7.0.0
- caeRegions() - Method in interface nxopen.cae.SimSimulation
-
Returns the CAE region collection belonging to this sim part .
- caeReuseLibrary() - Method in interface nxopen.cae.BaseFEModel
-
Returns the CaeReuseLibrary belonging to the part .
- CaeReuseLibrary - Interface in nxopen.tooling
-
- CaeSession - Interface in nxopen.cae
-
This class provides access to all session related CAE functionality
To obtain an instance of this class, refer to
Session
Created in NX7.5.0
- caeSession() - Method in interface nxopen.Session
-
Returns the
CaeSession
belonging to this session
Created in NX7.5.0
- CAESet - Interface in nxopen.cae
-
Represents a group of CAE object sets.
- CaeSetGroupFilterType - Class in nxopen.cae
-
Used to specify the filter to extract type of objects from a group e.g geometric face, element, node ..etc
- CaeSetObjectSubType - Class in nxopen.cae
-
Used to specify the sub type of selected objects e.g face of an element, edge of an element ..etc
- caeSubId - Variable in class nxopen.ame.SelectAMEBaseNode.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.ame.SelectAMEPort.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.ame.SelectAspectNode.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.annotations.SelectAnnotation.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.annotations.SelectDimension.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.assemblies.SelectComponent.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.cae.SelectCAEBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.cae.SelectCAEEdge.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.cae.SelectCAEFace.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.cae.SelectFENode.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.cam.SelectCAMFeature.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.drawings.SelectDraftingView.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.drawings.SelectDrawingView.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.drawings.SelectSectionLine.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.facet.SelectFacetedBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.features.SelectFeature.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.features.SelectFlatPattern.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.features.SelectPartModule.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.layout2d.SelectComponent.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectBaseSection.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectControlPort.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectFieldData.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectJoint.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectLink.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectMarker.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectRoad.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.routing.SelectControlPoint.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.routing.SelectISegment.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.routing.SelectLineSegment.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.routing.SelectPort.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.routing.SelectRun.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.routing.SelectStock.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectCoordinateSystem.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectCurve.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectDatumPlane.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectDisplayableObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectEdge.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectFace.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectGroup.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectIBaseCurve.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectIBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectICurve.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectIReferenceAxis.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectISurface.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectLine.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectNXObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectPart.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectPoint.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectSketch.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectSmartObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectSpline.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectTaggedObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.SelectView.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.weld.SelectDatumPin.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubId - Variable in class nxopen.weld.SelectDatumSurface.ValueWithCaeSetObjectInfoData
-
CAE set object sub id
- caeSubType - Variable in class nxopen.ame.SelectAMEBaseNode.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.ame.SelectAMEExtendedObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.ame.SelectAMEPort.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.ame.SelectAspectNode.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.annotations.SelectAnnotation.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.annotations.SelectDimension.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.assemblies.SelectComponent.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.cae.SelectCAEBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.cae.SelectCAEEdge.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.cae.SelectCAEFace.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.cae.SelectFENode.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.cam.SelectCAMFeature.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.drawings.SelectDraftingView.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.drawings.SelectDrawingRegion.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.drawings.SelectDrawingView.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.drawings.SelectSectionLine.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.facet.SelectFacetedBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.features.SelectFeature.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.features.SelectFlatPattern.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.features.SelectPartModule.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.layout2d.SelectComponent.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.mechatronics.SelectAdapterSignal.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.mechatronics.SelectCollisionSensor.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.mechatronics.SelectPhysicsConstraint.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.mechatronics.SelectPhysicsJoint.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.mechatronics.SelectRigidBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.mechatronics.SelectSystemObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.mechatronics.SelectTagFormObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectAnalyticalContactProperty.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectBaseSection.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectControlPort.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectFieldData.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectJoint.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectLink.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectMarker.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectRoad.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectSplineBeamProperty.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectTirePropertyBasic.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectTirePropertyCd.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectTirePropertyFt.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectTirePropertyMotorcycle.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectTirePropertyNonInertial.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.motion.SelectTirePropertyTno.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.routing.SelectControlPoint.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.routing.SelectISegment.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.routing.SelectLineSegment.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.routing.SelectPort.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.routing.SelectRun.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.routing.SelectStock.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectCartesianCoordinateSystem.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectCoordinateSystem.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectCurve.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectDatumPlane.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectDisplayableObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectEdge.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectFace.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectGroup.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectIBaseCurve.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectIBody.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectICurve.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectIParameterizedSurface.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectIReferenceAxis.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectISurface.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectLine.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectNXObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectPart.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectPoint.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectSketch.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectSmartObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectSpline.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectTaggedObject.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.SelectView.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.weld.SelectDatumPin.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- caeSubType - Variable in class nxopen.weld.SelectDatumSurface.ValueWithCaeSetObjectInfoData
-
CAE set object sub type
- CAET_ELEMENT_CHECK_TOL - Static variable in class nxopen.uf.UFConstants
-
- CAET_MAX_ELEM_NODES - Static variable in class nxopen.uf.UFConstants
-
- CAEVertex - Interface in nxopen.cae
-
Represents a CAE vertex geometry
.
- caeViewLayoutManager() - Method in interface nxopen.BasePart
-
Returns the CAE.ViewLayoutManager in the session
Created in NX12.0.0
- CAEWeldConnection - Interface in nxopen.cae
-
Represents WeldConnection Recipe
To create or edit an instance of this class, use
CAEWeldConnectionBuilder
Created in NX6.0.0
- CAEWeldConnectionBuilder - Interface in nxopen.cae
-
- CAEWeldConnectionBuilder.MeshDensityTypeEnum - Class in nxopen.cae
-
the mesh density type enum
- CAEWeldConnectionBuilder.WeldTypeEnum - Class in nxopen.cae
-
the type of weld connection to be created
- CAGE_AND_BODY - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.DisplayModes
-
Display both cage and body
- CAGE_ONLY - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.DisplayModes
-
Display cage only
- cageCode() - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
-
Returns the cage code
License requirements: None.
- cageEdgeToEdit() - Method in interface nxopen.features.subdivision.SubdivisionConnectCageBuilder
-
Returns the cage edge to edit
License requirements: None.
- cageManipulator() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the cage manipulation data.
- CageManipulatorData - Interface in nxopen.features.subdivision
-
Subdivision cage manipulation tool.
- CageManipulatorData.ObjectMoveData - Class in nxopen.features.subdivision
-
Contains object movement information.
- CageManipulatorData.ObjectSelectionData - Class in nxopen.features.subdivision
-
Contains object selection information.
- CagePolylineBuilder - Interface in nxopen.features.subdivision
-
Cage polyline builder class.
- cagePolylineColor() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the cage polyline color.
- cagePolylineFont() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the cage polyline font.
- cagePolylineVertexColor() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the cage polyline vertex color.
- cagePolylineVertexSize() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the cage polyline vertex size.
- cagePolylineVertexStyle() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the cage polyline vertex style.
- cagePolylineWidth() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the cage polyline width.
- CageSectionData - Interface in nxopen.features.subdivision
-
Represents subdivision cage section selection.
- CageSectionDataList - Interface in nxopen.features.subdivision
-
Represents a list of objects.
- calcAbsMinmaxBox(Tag) - Method in interface nxopen.uf.UFRoute
-
- calcClearanceButton() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Calculate weld clearance
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- calcThroughLimits(Direction) - Method in interface nxopen.features.MasterCutBuilder
-
Calculate start and end through limit values
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CalcThroughLimitsData() - Constructor for class nxopen.features.MasterCutBuilder.CalcThroughLimitsData
-
- CALCULATE - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.MaximumAlternatingStressEnum
-
Calculate
- CALCULATE - Static variable in class nxopen.presslinesimulation.UserMotionBuilder.CurveType
-
- calculate() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Calculate button on the Calculate Tab page.
- calculate() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Method for the "Calculate" button, needs to be called before calling commit.
- calculateAndSetNameOfAGAttr(AttributeGroup, String, String) - Method in interface nxopen.linedesigner.UINodeUtils
-
To calculate and set attribute group name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- calculateAndStoreFastRmsPsdFit(String, int, AfuMathOperation.OutputType, String, AfuMathFastRMSInfo) - Method in interface nxopen.cae.AfuMathOperation
-
Calculate and store FastRMS Fitted PSD data from AFU Data Record
License requirements: None.
- CalculateAreaBuilder - Interface in nxopen.tooling
-
- CalculateAreaBuilder.SheetMethodType - Class in nxopen.tooling
-
Represents the methods to create the projected sheet body.
- CalculateAreaCollection - Interface in nxopen.tooling
-
Represents a collection of CalculateArea builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- calculateAreas() - Method in interface nxopen.tooling.ToolingManager
-
Returns the CalculateAreaCollection instance belonging to this part .
- calculateBeamStrResults - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- calculateBoxSize() - Method in interface nxopen.features.ToolingBoxBuilder
-
Calculate box size and set directions, edge length, lower point position.
- calculateBoxSize() - Method in interface nxopen.tooling.DieInsertBuilder
-
Calculate box size and set directions, edge length, lower point position.
- calculateBoxSize() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Calculate box size and set directions, edge length, lower point position.
- calculateBoxSize() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Calculate box size and set directions, edge length, lower point position.
- calculateBoxSize() - Method in interface nxopen.tooling.StockSizeBuilder
-
Calculate box size and get directions, edge length, lower point position.
- CalculateBoxSizeData() - Constructor for class nxopen.tooling.StockSizeBuilder.CalculateBoxSizeData
-
- calculateComacs() - Method in interface nxopen.cae.CorrelSolution
-
Computes the CoMAC correlation metric for active modes
License requirements: nx_correl_base ("FE Correlation")
.
- CalculateComacsData() - Constructor for class nxopen.cae.CorrelSolution.CalculateComacsData
-
- calculateConvex() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
The convex of the collide.
- calculateCutLength() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Calculates and sets cut length on object.
- calculateDatumMeasurementDefaultDirection() - Method in interface nxopen.weld.WeldPointBuilder
-
Calculate location and default direction of datum and measurement, need to set the current point prior to calling this method
License requirements: ugweld ("UG WELD")
.
- calculateDistance(int) - Method in interface nxopen.cam.MillingTrackpointBuilder
-
Calculate distance when defining tracking point only by the diameter
License requirements: cam_base ("CAM BASE")
.
- CalculateDistanceData() - Constructor for class nxopen.cam.MillingTrackpointBuilder.CalculateDistanceData
-
- calculateErrors() - Method in interface nxopen.cae.ModelUpdateSolution
-
Calculates errors
License requirements: nx_correl_update ("FE Model Update")
.
- calculateGrueblerCount(NXObject) - Method in interface nxopen.motion.MotionSimulation
-
Calculate the gruebler count of given motion part
License requirements: None.
- calculateGrueblerCount() - Method in interface nxopen.motion.MotionSolution
-
Calculate gruebler count of motion solution
License requirements: mechanisms ("MECHANISMS")
.
- calculateMaxDeviation() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the indication if the feature should calculate the maximum deviation of the result.
- calculateMeasure(PackagingMeasure) - Method in interface nxopen.motion.PostToolsControl
-
Calculate measure result
License requirements: mechanisms ("MECHANISMS")
.
- calculateMeasures(PackagingMeasure[]) - Method in interface nxopen.motion.PostToolsControl
-
Calculate measures result
License requirements: mechanisms ("MECHANISMS")
.
- calculateMesh() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
The mesh of the collide.
- calculateMeshValue() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Calculates the default mesh settings values.
- calculateMomentAboutPoint() - Method in interface nxopen.cae.NodalForceReportBuilder
-
Returns the calculate moment about a point option
License requirements: None.
- calculateMultiConvex() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
The multi-convex of the collide.
- calculateMultiMathRecords(AfuMathOperation.MultiType, String, int, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Does Multi Math Operations on AFU Data Records
License requirements: None.
- calculateOverallMathRecords(AfuMathOperation.Overall, String[], int[], AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Does Overall Math Operations on AFU Data Records
License requirements: None.
- calculatePenetrationDepth(DisplayableObject[], DisplayableObject[]) - Method in interface nxopen.assemblies.ClearanceSet
-
Calculate penetration depth for a set of hard interferences.
- calculatePointCurvature(Face, Point3d) - Method in interface nxopen.features.ConcaveFacesBuilder
-
The radius values at the point selected on a targeted face, the maximum and minimum radius of the targeted face.
- CalculatePointCurvatureData() - Constructor for class nxopen.features.ConcaveFacesBuilder.CalculatePointCurvatureData
-
- calculateProfilePoints() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Calculate the points of the tire profile.
- calculateRefDir(Tag, Tag, boolean, Tag) - Method in interface nxopen.uf.UFModeling
-
- calculateSingleMathAbsoluteValue(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets absolute values of AFU Data Records
License requirements: None.
- calculateSingleMathComplexConjugate(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets complex conjugate values of AFU Data Records
License requirements: None.
- calculateSingleMathFourierTransform(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets fourier transform values of AFU Data Records
License requirements: None.
- calculateSingleMathFrequencyDifferentiation(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets frequency differentiation values of AFU Data Records
License requirements: None.
- calculateSingleMathFrequencyIntegration(boolean, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets frequency integration values of AFU Data Records
License requirements: None.
- calculateSingleMathIndependentDifferentiation(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets independent differentiation values of AFU Data Records
License requirements: None.
- calculateSingleMathIndependentIntegration(boolean, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets independent integration values of AFU Data Records
License requirements: None.
- calculateSingleMathInverse(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets inverse values of AFU Data Records
License requirements: None.
- calculateSingleMathLagrangianInterpolation(int, AfuMathOperation.OuterInterpolation, double, double, double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Interpolates AFU Data Records with lagrangian method
License requirements: None.
- calculateSingleMathLinearInterpolation(AfuMathOperation.OuterInterpolation, double, double, double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Interpolates AFU Data Records with linear method
License requirements: None.
- calculateSingleMathMovingAverage(int, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets moving average values of AFU Data Records
License requirements: None.
- calculateSingleMathOffsetByComplex(double, double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Offsets AFU Data Records by complex value
License requirements: None.
- calculateSingleMathOffsetByReal(double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Offsets AFU Data Records by real value
License requirements: None.
- calculateSingleMathScaleByComplex(double, double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Scales AFU Data Records by complex value
License requirements: None.
- calculateSingleMathScaleByReal(double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Scales AFU Data Records by real value
License requirements: None.
- calculateSingleMathShiftAbscissa(double, String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Shifts abscissa values of AFU Data Records
License requirements: None.
- calculateSingleMathSignValue(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets sign values of AFU Data Records
License requirements: None.
- calculateSingleMathSquareMagnitude(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets square of magnitude values of AFU Data Records
License requirements: None.
- calculateSingleMathSquareRoot(String, int, AfuMathOperation.OutputType, String) - Method in interface nxopen.cae.AfuMathOperation
-
Gets square root values of AFU Data Records
License requirements: None.
- calculateStaticEquilibrium() - Method in interface nxopen.uf.UFMotion
-
- calculateWeldPoints() - Method in interface nxopen.weld.WeldPointBuilder
-
To calculate all weld points
License requirements: ugweld ("UG WELD")
.
- calculateZoomScale(double, double) - Method in interface nxopen.cae.xyplot.AxisModel
-
Gives expected display limits to calculate a zoom scale range which could be used by
Graph
for zooming operation.
- CalculateZoomScaleData() - Constructor for class nxopen.cae.xyplot.AxisModel.CalculateZoomScaleData
-
- calculation() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Starts solver to calculate.
- CALCULATION - Static variable in class nxopen.cae.aerostructures.MarginResultTableDataProvider.ColumnType
-
- calculation() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Starts solver to calculate.
- CALCULATION - Static variable in class nxopen.features.FlatteningAndFormingBuilder.Types
-
This option faces to be flattened will be used to calculate the mapping.
- CALCULATION - Static variable in class nxopen.features.FlatteningAndFormingBuilderEx.Types
-
This option faces to be flattened will be used to calculate the mapping.
- calculation() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the calculation type for this head impact study.
- CALCULATION - Static variable in class nxopen.FlatteningBuilder.Types
-
Deprecated.
Calculate new flattening result
- calculationBody() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the body for thickness analysis.
- calculationCalculateMethod() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the calculation method used in the thickness analysis.
- CalculationContext - Interface in nxopen.cae.aerostructures.author
-
Calculation context is passed to the method implementation.
- calculationDrawDirection() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the draw direction on the Calculate Tab page.
- calculationMaximumSpacing() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the maximum spacing used in the thickness analysis.
- calculationMaximumThicknessTolerance() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the maximum thickness tolerance used in the thickness analysis.
- calculationMethod() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the setting for the clearance calculation method.
- calculationMethod() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Returns the calculation method defining methods to calculate shrinkage factors.
- calculationMethod() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
Returns the calculation method type which determines the calculation method in the inner angle.
- calculationMethod() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the calculation method
License requirements: None.
- calculationMethod() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the calculation method
License requirements: None.
- calculationMethod() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the calculation method
License requirements: None.
- calculationOption() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the calculation option on the Calculate Tab page.
- calculationProductBody() - Method in interface nxopen.tooling.MWMoldedPartValidationBuilder
-
Returns the product body to be analyzed on the Calculate Tab page.
- calculationProjectToFace() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the project to face option for the thickness analysis on the Calculation Tab page.
- calculationSamplePointsIntervalScale() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Returns the scale for controlling the sampling spacing and thickness analysis tolerance.
- calculationType() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the calculation method.
- calibrationDepth() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the calibration depth
License requirements: None.
- calibrationType() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the calibration type
License requirements: None.
- CALL - Static variable in class nxopen.ame.PlcRule.Type
-
- callback(CalculationContext) - Method in interface nxopen.cae.aerostructures.author.MethodLibrary.Callback
-
Callback type
License requirements: None.
- callback(NXObject[]) - Method in interface nxopen.routing.CustomManager.Callback
-
This defines the prototype for all Routing callbacks.
- CALLER - Static variable in class nxopen.ame.PortBuilder.Type
-
- CALLER_INSTANCE - Static variable in class nxopen.ame.PlcSymbolsEvaluatorBuilder.FilterType
-
- CallMethodRuleBuilder - Interface in nxopen.ame
-
- CallMethodRuleBuilder.CreationType - Class in nxopen.ame
-
replace or insert rule Type
- CALLOUT - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- CALLOUT - Static variable in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
-
- CALLOUT - Static variable in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
-
- callout() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the callout block
License requirements: None.
- CALLOUT - Static variable in class nxopen.annotations.TableColumnBuilder.CategoryType
-
- callout - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- CALLOUTAND_QUANTITY - Static variable in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
-
- CALLOUTAND_QUANTITY - Static variable in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
-
- CalloutGroupBuilder - Interface in nxopen.annotations
-
- CalloutGroupBuilder.Layout - Class in nxopen.annotations
-
Represents group layout
- CalloutGroupBuilder.Mode - Class in nxopen.annotations
-
Represents Group or Ungroup mode.
- CalloutGroupBuilder.VerticalGroupLeaderAttachment - Class in nxopen.annotations
-
Represents leader attachment for vertical callout groups.
- calloutIncrement - Variable in class nxopen.uf.UFPlist.Prefs
-
- calloutModeType() - Method in interface nxopen.annotations.CalloutGroupBuilder
-
Returns the mode
License requirements: None.
- CalloutString() - Constructor for class nxopen.uf.UFGdt.CalloutString
-
- CalloutString(Tag, UFGdt.ToleranceType, String) - Constructor for class nxopen.uf.UFGdt.CalloutString
-
- calloutStrings - Variable in class nxopen.uf.UFGdt.AskCalloutStringsData
-
- calloutSuffix() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the callout suffix specifies the suffix to be used for reference symbol text
License requirements: None.
- calloutType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the callout type
License requirements: None.
- calPageNormalVector() - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
- CAM - Static variable in class nxopen.die.MachineReliefBuilder.Types
-
Add casting material for the trim, or flange, steel mating surface.
- CAM - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a Manufacturing file new template
- Cam - Interface in nxopen.mechatronics
-
Represents the Cam Constraint.
- CAM - Static variable in class nxopen.tooling.QuickQuotationBuilder.ObjectTypes
-
sheet body is camunits.
- cam() - Method in interface nxopen.UFSession
-
- CAM_ACL_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_ACL_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_ARC_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_ARC_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_BCL_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_BCL_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_CL_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_CL_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_CLF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_CLF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_CLS_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_CLS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_CONFIG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_CONFIG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_CYC_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_CYC_FILE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_DISPAT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_DISPAT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_FEA_EXPORT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_GPM_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_GPM_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_ISO_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_ISO_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_LIBLIST_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_LIBLIST_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_LISTOUT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_LISTOUT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_MDF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_MDF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_MTK_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_MTK_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_NCOUT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_NCOUT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_SDIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_SETUP_PRT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_SETUP_PRT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_SFLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_SHOP_DOC_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_SHOP_DOC_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_TEMPSET_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_TEMPSET_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_TOOLIB_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_TOOLIB_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_VCUTS_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_VCUTS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAM_VCUTT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- CAM_VCUTT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- CAMAttribute - Interface in nxopen.cam
-
Represents a CAM Feature Attribute
To obtain an instance of this class use
CAMFeature
Created in NX8.0.0
- CAMAttribute.ValueType - Class in nxopen.cam
-
Attribute types
- CAMAttributeCollection - Interface in nxopen.cam
-
Represents the CAM Attribute collection
To obtain an instance of this class, refer to
CAMFeature
Created in NX8.0.0
- camAxis() - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
Returns the axis of rotation.
- camber() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the camber of wheel in degree.
- camber() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the wheel camber in degree.
- camberHeight() - Method in interface nxopen.features.shipdesign.DeckBuilder
-
Returns the expression containing the difference in the height of the camber from the center
of the ship to the hull intersections in the selected plane.
- camberOffset() - Method in interface nxopen.features.shipdesign.DeckBuilder
-
Returns the expression containing the offset from the ends of the camber section in the
selected plane to the start of the straight portion of the camber shape.
- cambnd() - Method in interface nxopen.UFSession
-
- cambndWedm() - Method in interface nxopen.UFSession
-
- camBodies() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the plunger bodies.
- camBodies() - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
Returns the linaer cam bodies.
- camBodies() - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
Returns the rotary cam bodies.
- CamBuilder - Interface in nxopen.mechatronics
-
Represents a
Cam
builder.
- CamBuilder.AddCamDiskToMasterOption - Class in nxopen.mechatronics
-
Represents the option of add cam disk.
- CamBuilder.AxisJointType - Class in nxopen.mechatronics
-
Represents the axis joint type.
- CamBuilder.CreateCamDiskType - Class in nxopen.mechatronics
-
Represents the cam disk type.
- CamCollection - Interface in nxopen.mechatronics
-
Represents a collection of Cam.
- camCollisionFacetingTolerance() - Method in interface nxopen.presslinesimulation.DrivenCamBuilder
-
Returns the cam collision faceting tolerance.
- camdataManager() - Method in interface nxopen.Part
-
Returns the Tooling.CAMDataManager for this part
Created in NX9.0.0
- CAMDataManager - Interface in nxopen.tooling
-
Represents an object that manages cam data objects.
- CAMDataPrepManager - Interface in nxopen.geometricutilities
-
Contains the create functions for builders.
- camdataPrepManager() - Method in interface nxopen.Part
-
Returns the CAMDataPrepManager instance belonging to this part .
- camDefinitionMethod() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
- camDir() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the cam direction.
- camDir() - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
Returns the direction of motion from the cam toward the backstop.
- camDirection() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the cam direction of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- camDirection() - Method in interface nxopen.die.FormTaskBuilder
-
Returns the cam direction of the form task.
- camDirection() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the direction of the cam for trimming.
- camDirection() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the cam direction of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- camDirection() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the cam direction of the steelinsert
License requirements: ug_die_design ("Die Design")
.
- camDirection() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the cam direction of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- camDirection() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the cam direction used to create Trim Post
License requirements: ug_die_design ("Die Design")
.
- camDirection() - Method in interface nxopen.tooling.DieEngFormTaskBuilder
-
Returns the cam direction.
- camDiskRefPoint() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the cam disk reference point.
- camDiskType() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the cam disk type.
- camera() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Returns the camera to use
License requirements: None.
- Camera - Interface in nxopen.display
-
Represents a camera
To obtain an instance of this class, use
CameraCollection
Created in NX5.0.0
- CAMERA_DIRECTION_PLANE - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
-
Deprecated.
scale 1, 0 offset uv texture space
- cameraAxis() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the selected axis defining the camera direction.
- CameraBuilder - Interface in nxopen.display
-
- CameraBuilder.Aperture - Class in nxopen.display
-
Predefined apertures: f2.8, f5.6, f8, f11, f16, f22
- CameraBuilder.FovMeasured - Class in nxopen.display
-
either horizontal or vertical measure
- CameraBuilder.LensAngle - Class in nxopen.display
-
the way to define the field of view angle
- CameraBuilder.LensFlare - Class in nxopen.display
-
Predefined lens flare types: Standard, 35mm, 50mm, 105mm,
polygonal, 35mm poly, 50mm poly, 105mm poly, spark, star
- CameraBuilder.StockLens - Class in nxopen.display
-
Predefined lenses: 28, 35, 50, 70, 105, 135, 210, 300mm
- CameraBuilder.Types - Class in nxopen.display
-
the camera types
- CameraCollection - Interface in nxopen.display
-
Represents a collection cameras
To obtain an instance of this class, refer to
BasePart
Created in NX5.0.0
- cameraCsys() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the coordinate system specifying the camera position.
- cameraDirectionPlaneOption - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
-
- cameraDistance() - Method in interface nxopen.display.PerspectiveOptionsBuilder
-
Returns the camera distance: The distance from the camera's position to the
target position in the work view view when it is a perspective view.
- cameraFace() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the face selections used to identify the camera surface.
- cameraFacetBodies() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the facet selections used to identify the camera facet bod.
- CameraLayerAndXmlpData() - Constructor for class nxopen.die.FlangeTaskBuilder.CameraLayerAndXmlpData
-
- CameraLayerAndXmlpData() - Constructor for class nxopen.die.PierceTaskBuilder.CameraLayerAndXmlpData
-
- CameraLayerAndXmlpData() - Constructor for class nxopen.die.TrimTaskBuilder.CameraLayerAndXmlpData
-
- cameraList() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
- cameraMatrix() - Method in interface nxopen.display.CameraBuilder
-
Returns the camera rotation matrix
License requirements: None.
- cameraName() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the selected camera
License requirements: None.
- cameraName() - Method in interface nxopen.display.CameraBuilder
-
Returns the camera name as a TEXT string.
- cameraNameChar() - Method in interface nxopen.display.CameraBuilder
-
Returns the camera name as a char string
License requirements: None.
- cameraPosition() - Method in interface nxopen.display.CameraBuilder
-
Returns the coordinates of the camera point
License requirements: None.
- cameras() - Method in interface nxopen.BasePart
-
Returns the Display.CameraCollection instance belonging to this part
Created in NX3.0.0
- cameraType() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder
-
Returns the camera definition type used by the close range visibility.
- CAMFeature - Interface in nxopen.cam
-
- CAMFeature.ProcessStatus - Class in nxopen.cam
-
Process status of the feature
- CAMFeature.State - Class in nxopen.cam
-
Update status of the feature
- CAMFeatureCollection - Interface in nxopen.cam
-
Represents the CAMFeature collection
To obtain an instance of this class, refer to
BasePart
Created in NX7.5.0
- CAMFeatureList - Interface in nxopen.cam
-
Represents a list of objects.
- camfeatures() - Method in interface nxopen.BasePart
-
Returns the CAMFeatureCollection instance belonging to this part .
- camgeom() - Method in interface nxopen.UFSession
-
- camgroupCollection() - Method in interface nxopen.cam.CAMSetup
-
Returns the NCGroupCollection instance belonging to this setup .
- CamInspectionOperationCsysreferencetypes - Class in nxopen.cam
-
Coordinate system that the inspection feature data is relative to
- CamInspectionOperationExtenttypes - Class in nxopen.cam
-
Specifies whether the feature extent is bounded or unbounded
- CamInspectionOperationFeaturetypes - Class in nxopen.cam
-
Specifies the type of an inspection feature
- CamInspectionOperationInneroutertypes - Class in nxopen.cam
-
Directionality of feature surface
- camList() - Method in interface nxopen.presslinesimulation.HydraulicLifterListBuilder
-
Returns the list of hydraulic lifter builders.
- camList() - Method in interface nxopen.presslinesimulation.LinearCamListBuilder
-
Returns the list of linear cam builders.
- camList() - Method in interface nxopen.presslinesimulation.RotaryCamListBuilder
-
Returns the list of rotary cam builders.
- camList() - Method in interface nxopen.presslinesimulation.UserMotionListBuilder
-
Returns the list of user motion builders.
- camMode - Variable in class nxopen.uf.UFPart.ImportPartModes
-
- cammoveCollection() - Method in interface nxopen.cam.Operation
-
Represents Move Collection .
- camName() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the cam name
License requirements: None.
- CAMObject - Interface in nxopen.cam
-
Represents interface for all CAM Object
To create or edit an instance of this class, use
ParamBuilder
Created in NX4.0.0
- CAMObject.Attr - Class in nxopen.cam
-
Represents the CAM attribute type.
- CAMObject.ErrorItem - Class in nxopen.cam
-
Error Item
- CAMObject.FeedRateData - Class in nxopen.cam
-
- CAMObject.FeedRateUnit - Class in nxopen.cam
-
The unit of feed rate
- CAMObject.Status - Class in nxopen.cam
-
The status of the object
- CAMObject.WireEdmFeedRateData - Class in nxopen.cam
-
- CamOperationCircularMotionDataType - Class in nxopen.cam
-
Circular motion data type
- CamOperationCircularMotionDataType() - Constructor for class nxopen.cam.CamOperationCircularMotionDataType
-
- CamOperationCircularMotionDataType(ToolpathEventType, CamOperationMotionType, CamOperationMotionShapeType, CamOperationFeedContentType, double, Point3d, Vector3d, Vector3d, Point3d, double, double) - Constructor for class nxopen.cam.CamOperationCircularMotionDataType
-
Constructor for the CamOperationCircularMotionDataType object.
- camoperationCollection() - Method in interface nxopen.cam.CAMSetup
-
Returns the OperationCollection instance belonging to this setup .
- CamOperationFeedContentType - Class in nxopen.cam
-
Feed content type
- CamOperationFeedContentType() - Constructor for class nxopen.cam.CamOperationFeedContentType
-
- CamOperationFeedContentType(double, CamOperationFeedUnitType) - Constructor for class nxopen.cam.CamOperationFeedContentType
-
Constructor for the CamOperationFeedContentType object.
- CamOperationFeedUnitType - Class in nxopen.cam
-
Feed unit types
- CamOperationHelicalMotionDataType - Class in nxopen.cam
-
Helical motion data type
- CamOperationHelicalMotionDataType() - Constructor for class nxopen.cam.CamOperationHelicalMotionDataType
-
- CamOperationHelicalMotionDataType(ToolpathEventType, CamOperationMotionType, CamOperationMotionShapeType, CamOperationFeedContentType, double, Point3d, Vector3d, Vector3d, Point3d, double, double, double) - Constructor for class nxopen.cam.CamOperationHelicalMotionDataType
-
Constructor for the CamOperationHelicalMotionDataType object.
- CamOperationLinearMotionDataType - Class in nxopen.cam
-
Linear motion data type
- CamOperationLinearMotionDataType() - Constructor for class nxopen.cam.CamOperationLinearMotionDataType
-
- CamOperationLinearMotionDataType(ToolpathEventType, CamOperationMotionType, CamOperationMotionShapeType, CamOperationFeedContentType, double, Point3d, Vector3d) - Constructor for class nxopen.cam.CamOperationLinearMotionDataType
-
Constructor for the CamOperationLinearMotionDataType object.
- CamOperationMotionContactDataType - Class in nxopen.cam
-
Motion contact data type
- CamOperationMotionContactDataType() - Constructor for class nxopen.cam.CamOperationMotionContactDataType
-
- CamOperationMotionContactDataType(CamOperationMotionPosType, Vector3d, Point3d, double, CamOperationMotionShapeType) - Constructor for class nxopen.cam.CamOperationMotionContactDataType
-
Constructor for the CamOperationMotionContactDataType object.
- CamOperationMotionPostDataType - Class in nxopen.cam
-
Motion post data type
- CamOperationMotionPostDataType() - Constructor for class nxopen.cam.CamOperationMotionPostDataType
-
- CamOperationMotionPostDataType(double, boolean) - Constructor for class nxopen.cam.CamOperationMotionPostDataType
-
Constructor for the CamOperationMotionPostDataType object.
- CamOperationMotionPosType - Class in nxopen.cam
-
Motion pos type
- CamOperationMotionPosType() - Constructor for class nxopen.cam.CamOperationMotionPosType
-
- CamOperationMotionPosType(Point3d, Vector3d) - Constructor for class nxopen.cam.CamOperationMotionPosType
-
Constructor for the CamOperationMotionPosType object.
- CamOperationMotionShapeType - Class in nxopen.cam
-
Motion shape types
- CamOperationMotionType - Class in nxopen.cam
-
Types of motions
- CamPathContactMotionShapeType - Class in nxopen.cam
-
Contact Motion shapes
- CamPathContactType - Class in nxopen.cam
-
Contact type of the Path
- CamPathDir - Class in nxopen.cam
-
Motion direction for circular and helix motions
- CamPathFeedUnitType - Class in nxopen.cam
-
Feedrate units
- CamPathMotionShapeType - Class in nxopen.cam
-
Motion shapes
- CamPathMotionType - Class in nxopen.cam
-
Motion types
- CamPathToolAxisType - Class in nxopen.cam
-
Tool axis type of the Path
- CamPathToolpathEventLocation - Class in nxopen.cam
-
The location where a path event has to be added into the path
- CamPathToolpathEventType - Class in nxopen.cam
-
Tool Path event types
- CAMPBELL_DIAGRAM - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Campbell Diagram
- CAMPBELL_DIAGRAM - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Campbell Diagram
- camPref() - Method in interface nxopen.UFSession
-
- camPrepro() - Method in interface nxopen.UFSession
-
- camProfile() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the cam profile.
- CamProfile - Interface in nxopen.mechatronics
-
Represents the CamProfile class.
- camProfile() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns a cam profile that contains a number of curves that describes the dependency of
the motion of a Slave Axis with respect to the Master Axis.
- CamProfileBuilder - Interface in nxopen.mechatronics
-
- CamProfileBuilder.Element - Class in nxopen.mechatronics
-
Contains segment information of a motion segment
- CamProfileBuilder.MasterValueUnit - Class in nxopen.mechatronics
-
The master value unit indicates which type master joint is.
- CamProfileBuilder.ProfileCyclicType - Class in nxopen.mechatronics
-
Indicates which cyclic type should be take.The type of Cam Profile can be switched between non-cyclic,
cyclic and relative cyclic
- CamProfileBuilder.SlaveValueUnit - Class in nxopen.mechatronics
-
The master value unit indicates which type master joint is.
- CamProfileCollection - Interface in nxopen.mechatronics
-
Represents a collection of Cam Profile.
- camProfiles() - Method in interface nxopen.mechatronics.PhysicsManager
-
- camrelief() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the cam relief parameter of Trim Post section
License requirements: ug_die_design ("Die Design")
.
- cams() - Method in interface nxopen.mechatronics.PhysicsManager
-
Returns the
CamCollection
belonging to this part
Created in NX7.5.1
- CAMSession - Interface in nxopen.cam
-
Represents cam session
To obtain an instance of this class, refer to
Session
Created in NX4.0.0
- camsession() - Method in interface nxopen.Session
-
Returns the CAM session .
- CAMSession.DialogCustomizationData - Class in nxopen.cam
-
- CAMSession.ObjectSubtype - Class in nxopen.cam
-
the template subtype class
- CAMSetup - Interface in nxopen.cam
-
cam setup
To obtain an instance of this class, use
Part.camsetup()
Created in NX4.0.0
- camsetup() - Method in interface nxopen.Part
-
Returns the CAM setup of the work part
License requirements: cam_base ("CAM BASE")
.
- CAMSetup.OutputUnits - Class in nxopen.cam
-
Output units used in output clsf and postprocess.
- CAMSetup.PartMaterialData - Class in nxopen.cam
-
- CAMSetup.Paste - Class in nxopen.cam
-
Paste position.
- CAMSetup.PostprocessSettingsOutputWarning - Class in nxopen.cam
-
Output warning setting for Postprocess
- CAMSetup.PostprocessSettingsReviewTool - Class in nxopen.cam
-
Review tool setting for Postprocess
- CAMSetup.RetrieveToolData - Class in nxopen.cam
-
- CAMSetup.Ude - Class in nxopen.cam
-
The UDE type
- CAMSetup.View - Class in nxopen.cam
-
ONT view.
- camStatus() - Method in interface nxopen.cam.Cycle
-
Returns the cam status
License requirements: None.
- camtext() - Method in interface nxopen.UFSession
-
- camtrackPointCollection() - Method in interface nxopen.cam.Tool
-
Returns the CAMTrackPointCollection .
- camType() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the cam type of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- camType() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the cam type of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- camType() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the cam type of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- camType() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the cam type.
- camunitColor() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the cam unit color.
- camValue() - Method in interface nxopen.cam.Cycle
-
Returns the cam value
License requirements: None.
- CAN_CONNECT - Static variable in class nxopen.routing.PortConnectionCollection.PortsStatus
-
The Ports can be connected
using Port Connection object.
- CAN_NOT_PERFORM_CHECK - Static variable in class nxopen.geometricanalysis.SimpleInterference.Result
-
An unknown
error has occured while performing
the interference check.
- canAcceptItemUde(UFVariant, UFCambnd.UdeSetType, String) - Method in interface nxopen.uf.UFCambnd
-
- canAcceptMember(Tag, Tag) - Method in interface nxopen.uf.UFNcgroup
-
- CanAcceptMemberData() - Constructor for class nxopen.uf.UFNcgroup.CanAcceptMemberData
-
- canAcceptUde(Tag, UFUde.SetType, String) - Method in interface nxopen.uf.UFParam
-
- canAcceptUdeSet(Tag, UFUde.SetType) - Method in interface nxopen.uf.UFParam
-
- canAllowBackSideSelection() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the flag indicating if the hidden topology selection is allowed or not.
- canAnotherConnectionBeAdded() - Method in interface nxopen.diagramming.PortBuilder
-
Get whether another connection can be added or not.
- canApplyToAll() - Method in interface nxopen.features.IFormBuilder
-
Returns the value indicating if continuity is to be applied to all sides of the surface
License requirements: None.
- canBeDisplayPart() - Method in interface nxopen.BasePart
-
Returns true if the part can be displayed and false if not displayed.
- canBeEdited - Variable in class nxopen.userdefinedtemplate.InstantiationBuilder.MatchedExpressionData
-
- canBlend() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the value indicating if matching to be performed with the blend value
License requirements: None.
- cancel() - Method in interface nxopen.blockstyler.BlockDialog.Cancel
-
Cancel callback
License requirements: None.
- cancel() - Method in interface nxopen.display.PerspectiveOptionsBuilder
-
Cancels the Perspective Options Builder.
- CANCEL - Static variable in class nxopen.menubar.MenuBarManager.CallbackStatus
-
User interaction requested inhibiting the
menu item's actions.
- CANCEL - Static variable in class nxopen.Selection.DialogResponse
-
User selected Cancel
- CANCEL - Static variable in class nxopen.Selection.Response
-
User selected Cancel
- cancel(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.Cancel
-
Called when a dialog user clicks Cancel or <Alt>MB2 anywhere in NX or presses Cancel's keyboard accelerator
as defined in the resource file.Cancel callbacks should terminate the dialog and always return UF_UI_CB_EXIT_DIALOG.
- CANCEL - Static variable in class nxopen.uistyler.DialogItem.DialogItemIndex
-
Cancel index
- CANCEL - Static variable in class nxopen.uistyler.DialogResponse
-
Cancel button was selected.
- CANCEL_INDEX - Static variable in class nxopen.uistyler.StylerEvent.Miscellaneous
-
Cancel index
- CANCEL_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Cancel reason
- cancelUfDialog(int) - Method in interface nxopen.uf.UFUi
-
- canChangeLeaderPositionParameter() - Method in interface nxopen.annotations.Gdt
-
- canConnectSymmetrically() - Method in interface nxopen.features.subdivision.SubdivisionFillBuilder
-
Returns the flag indicating if selected edges are to be connected with their symmetric counterpart.
- canCopyAsSketch() - Method in interface nxopen.gateway.CopyCutBuilder
-
Returns a flag indicating whether to copy as sketch curves or not
License requirements: None.
- canCreateBoundingBox() - Method in interface nxopen.features.TextBuilder
-
Returns the flag indicating if bounding box can be created
License requirements: None.
- canCreateNewBody() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns whether the operation is applied to a copy of the face there by creating new body
License requirements: None.
- canCreateNewBody() - Method in interface nxopen.features.IFormBuilder
-
Returns whether the operation is applied to a copy of the face there by creating new body
License requirements: None.
- canCreateSingleFeature() - Method in interface nxopen.features.subdivision.ImportSubdivisionGeometryBuilder
-
Returns the flag indicating if single feature should be created for all the disjoint regions of the subdivision geometry.
- canDeselectObjectsAutomatically() - Method in interface nxopen.features.subdivision.SelectCageObjectData
-
- candidate() - Method in interface nxopen.mechatronics.TransmitterEntryBuilder
-
Returns the source selection.
- candidatePoint() - Method in interface nxopen.drawings.ViewPlacementBuilder
-
Returns the point to align in the view being edited.
- candidateStockCollector() - Method in interface nxopen.routing.MergeStocksBuilder
-
Returns a collector object that holds candidate stocks to be merged with target stock.
- candidateStockComponentCollector() - Method in interface nxopen.mechanicalrouting.MergeBuilder
-
Returns the routing component collector that collects candidate stock component to merge with target component
License requirements: routing_base ("Routing Basic")
.
- candidateType() - Method in interface nxopen.mechatronics.TransmitterEntryBuilder
-
Returns the type of candidate.
- candidateTypeNames - Variable in class nxopen.uf.UFMfm.AskCandidateMachiningFeatureTypesData
-
- candidateView() - Method in interface nxopen.drawings.ViewAlignmentBuilder
-
Returns the candidate view in builder
License requirements: drafting ("DRAFTING")
.
- canDivide() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the value indicating if facet body is to be divided
License requirements: None.
- canHaveNoMaterial() - Method in interface nxopen.cae.connections.IMaterial
-
Use this function to check if the connction supports having no material
License requirements: None.
- canHide() - Method in interface nxopen.diagramming.tables.CellRangeBuilder
-
Returns the can hide flag.
- canInferConstraintFromAttachmentParent() - Method in interface nxopen.features.GeometricConstraintData
-
Returns the flag indicating if a constraint can be inferred from the parent of the attachment object of the point.
- canInheritMaterial() - Method in interface nxopen.cae.connections.IMaterial
-
Use this function to check if the connction supports inherited material
License requirements: None.
- canJoinCurves() - Method in interface nxopen.features.TextBuilder
-
Returns the flag indicating if curves can be joined
License requirements: None.
- canKeepParameterization() - Method in interface nxopen.features.IFormBuilder
-
Returns the value indicating if input surface parameterization should be preserved during deformation
License requirements: None.
- canKeepTemplateSelected() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the flag indicating if template curve should be kept selected
License requirements: None.
- canMoveAlongCurve() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the value indicating if point should be moved along curve.
- canMoveToolOnly() - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
Returns the flag indicating if tool can be moved alone without moving selected topology
License requirements: None.
- canMoveToolOnly() - Method in interface nxopen.features.subdivision.PasteCageData
-
Returns the flag indicating if transformer tool can be moved without transforming the selected cage topology.
- canMoveToolOnly() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the flag indicating if transformer tool can be moved without transforming the selected cage topology.
- canMoveToolOnly() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the flag indicating if transformer tool can be moved without transforming the selected cage topology.
- CANNED_CYCLE_OFF - Static variable in class nxopen.cam.ToolpathEventType
-
- CANNED_CYCLE_ON - Static variable in class nxopen.cam.ToolpathEventType
-
- CannedAnnotationBuilder - Interface in nxopen.diagramming
-
Represents a CannedAnnotationBuilder.
- CannedAnnotationBuilder.InheritOption - Class in nxopen.diagramming
-
Represents the inherit option.
- CANNOT_CHANGE_GROOVE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- CANNOT_CHANGE_THD_DIRECTION - Static variable in class nxopen.uf.UFConstants
-
- CANNOT_CHANGE_THD_FACE - Static variable in class nxopen.uf.UFConstants
-
- CANNOT_CHANGE_THD_START_FACE - Static variable in class nxopen.uf.UFConstants
-
- CANNOT_COMPUTE_BOUNDARY - Static variable in class nxopen.uf.UFConstants
-
- CANNOT_CONNECT - Static variable in class nxopen.routing.PortConnectionCollection.PortsStatus
-
The Ports cannot be connected
using Port Connection object.
- CANNOT_FLIP - Static variable in class nxopen.routing.Run.FlipStatus
-
Run is deleted or there are no segments attached to component.
- CANNOT_FULLY_LOAD_STOCK_PART - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
Unable to fully load the stock part
- CANNOT_INIT_MODELER - Static variable in class nxopen.uf.UFConstants
-
- CANNOT_SOLVE - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
The constraint has invalid geometry and could not be passed to the solver
- canOpenPart() - Method in interface nxopen.UI
-
Returns a flag indicating whether the NX user interface is in a state
where opening a part and making it the display part is supported.
- canOptimizeCurve() - Method in interface nxopen.features.IsoclineCurveBuilder
-
Returns the Optimize Curve
License requirements: None.
- canPerformDefaultSave() - Method in interface nxopen.pdm.SmartSaveBuilder
-
Checks whether smart save operation can be performed with default operation type set
License requirements: None.
- canPortsConnect(Port, Port) - Method in interface nxopen.routing.PortConnectionCollection
-
Determines if the two ports can be connected using a
PortConnection
object.
- canProjectCurves() - Method in interface nxopen.features.TextBuilder
-
Returns the flag indicating if curves can be projected
License requirements: None.
- canReferenceText() - Method in interface nxopen.features.TextBuilder
-
Returns the flag indicating if text feature can reference a string expression
License requirements: None.
- canRejectPointsAutomatically() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the flag indicating if points beyond a threshold value should be ignored during fitting
License requirements: None.
- canRelocateToolToSelection() - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
Returns the flag indicating if tool should relocate to selection
License requirements: None.
- canRelocateToolToSelection() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the flag indicating if transformer tool can be relocated based on cage topology selection.
- canRelocateToolToSelection() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the flag indicating if transformer tool can be relocated based on cage topology selection.
- canReorientToolToSelection() - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
Returns the flag indicating if tool should reorient to selection
License requirements: None.
- canReorientToolToSelection() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the flag indicating if transformer tool can be reoriented based on cage topology selection.
- canReorientToolToSelection() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the flag indicating if transformer tool can be reoriented based on cage topology selection.
- canReplaceContentDefinition(ContentDefinition) - Method in interface nxopen.assemblies.Subset
-
- canReverseDirection() - Method in interface nxopen.features.subdivision.CageSectionData
-
Returns the flag indicating if section direction is reversed.
- canReverseDirection() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Returns the flag indicating if tangent direction is to be reversed
License requirements: None.
- canReverseIntersectionCurve() - Method in interface nxopen.features.TextBuilder
-
Returns the flag indicating if intersection curve can be reversed
License requirements: None.
- canReverseOffsetDirection() - Method in interface nxopen.features.subdivision.OffsetCageBuilder
-
Returns the flag indicating if offset direction can be reversed.
- canSew() - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder
-
Returns the value indicating if open edges of the loft mesh can be sewn with selected input open edges.
- canSew() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
Returns the value indicating if open edges of the revolve mesh can be sewn with selected input open edges.
- canSew() - Method in interface nxopen.features.subdivision.SubdivisionSweepBuilder
-
Returns the value indicating if open edges of the swept mesh can be sewn with selected input open edges.
- canShowFacet() - Method in interface nxopen.geometricanalysis.FaceAnalysisDisplayBuilder
-
Returns the flag indicating if facets should be shown.
- canShowWeight() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the flag indicating if the edge weights are displayed or not.
- canStretchHeight() - Method in interface nxopen.blockstyler.Tree
-
Returns the CanStretchHeight.
- canStretchWidth() - Method in interface nxopen.blockstyler.Tree
-
Returns the CanStretchWidth.
- CANT_DELETE_UNKNOWN - Static variable in class nxopen.routing.SingleDevice.DeleteObjectResult
-
Unknown error occurred while deleting.
- CANT_USE_FIXED_DAXIS - Static variable in class nxopen.uf.UFConstants
-
- canTypeHaveMatrix(int) - Method in interface nxopen.uf.UFObj
-
- canUseAllPointsInPart() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the flag indicating if all points in the part can be used for chaining
License requirements: None.
- canUseFaceFinder() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the synchronous mode
License requirements: None.
- canUseFaceFinder() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the using face finder flag
License requirements: None.
- canUseKerningSpaces() - Method in interface nxopen.features.TextBuilder
-
Returns the flag indicating if kerning spaces can be used
License requirements: None.
- canUseOrientationTool() - Method in interface nxopen.features.PolylineBuilder
-
Returns the flag indicating if WCS like tool should be deployed when a point or pole handle is selected
License requirements: None.
- canUseOrientationTool() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the flag indicating if WCS like tool should be deployed when a point or pole handle is selected
License requirements: None.
- CAP - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndTreatmentTypes
-
caps are applied
- CAP - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndTypeOptions
-
Each end has different end cuts
- capacity() - Method in interface nxopen.linedesigner.ConveyorStationFeatureBuilder
-
Returns the conveyor station capacity
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- capColor() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the cap color.
- capColorOption() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the cap color option
License requirements: None.
- capDist - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
-
- capFace() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the face or plane to be used as cap face.
- capFace() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the cap face used to trim
License requirements: None.
- capOption() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the cap option.
- cappingFaces() - Method in interface nxopen.features.RibBuilder
-
Returns the capping datum or faces
License requirements: None.
- capPlane() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the new plane to be used as cap face.
- capsList() - Method in interface nxopen.geometricutilities.BlendLimitsData
-
Returns the caps list
License requirements: None.
- CAPSULE - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Capsule
- caption - Variable in class nxopen.openxml.ImageDocumentData.CaptionData
-
- caption - Variable in class nxopen.openxml.TableDocumentData.CaptionData
-
- caption() - Method in interface nxopen.report.ReportImage
-
Returns the image caption text.
- CaptionData() - Constructor for class nxopen.openxml.ImageDocumentData.CaptionData
-
- CaptionData() - Constructor for class nxopen.openxml.TableDocumentData.CaptionData
-
- CAPTURE_DISTANCE - Static variable in class nxopen.uf.UFConstants
-
- captureAndCreateAttachmentForSnapshot() - Method in interface nxopen.issue.IssueManager
-
Creates a
IssueAttachment
for Snapshot
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- captureArea() - Method in interface nxopen.MovieSettingsBuilder
-
Returns the area captured for movie creation.
- captureArrangement(String, int) - Method in interface nxopen.motion.PostProcess
-
Capture or update an arrangement from motion result of active solution.
- captureArrangement(String, int, int) - Method in interface nxopen.motion.PostProcess
-
Capture or update an arrangement from motion result of active solution.
- captureArrangementFromCurrentSequence(String) - Method in interface nxopen.uf.UFAssem
-
- CaptureArrangementFromCurrentSequenceData() - Constructor for class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceData
-
- captureArrangementFromCurrentSequenceExtended(String, boolean) - Method in interface nxopen.uf.UFAssem
-
- CaptureArrangementFromCurrentSequenceExtendedData() - Constructor for class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceExtendedData
-
- captureCurrentView() - Method in interface nxopen.cam.InspectionGraphicalReportBuilder
-
Capture the current view.
- captureCurrentView() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Capture the current view using a new camera
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- capturedImage() - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Returns the image capture builder used to create an image for preview
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- captureFrame() - Method in interface nxopen.MovieManager
-
Use this method to capture a frame at a specified point.
- captureMethod() - Method in interface nxopen.gateway.ImageCaptureBuilder
-
Returns the capture method
License requirements: None.
- capType() - Method in interface nxopen.SketchOffsetBuilder
-
Returns the type of the cap needed at the corners
License requirements: None.
- carBodyFaces() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
Returns the selected car body faces for measurement.
- carBodyFaces() - Method in interface nxopen.features.vehicledesign.OilPanBuilder
-
Returns the faces representing the car body geometry for the measurment.
- carcassMass() - Method in interface nxopen.motion.TirePropertyHighOrderParameters
-
Returns the carcass mass
License requirements: mechanisms ("MECHANISMS")
.
- carCsys() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the Car Coordinate System
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- CARDAN - Static variable in class nxopen.cae.connections.DofCombination
-
DOF1 fixed, DOF2 fixed, DOF3 fixed, DOF4 free, DOF5 fixed, DOF6 free
- cardName() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
Returns the card name
License requirements: None.
- carGeometry() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the faces representing the car geometry to use as obstructing elements.
- CARPET - Static variable in class nxopen.motion.TirePropertyBasicParameters.CorneringType
-
- carrierCsys() - Method in interface nxopen.motion.TireBuilder
-
Returns the carrier coordinate system.
- carrierLink() - Method in interface nxopen.motion.TireBuilder
-
Returns the carrier link.
- carrierName() - Method in interface nxopen.cam.MachineTurretGroupBuilder
-
Returns the Carrier Name object(inheritable text)
License requirements: None.
- carrierPoint() - Method in interface nxopen.motion.TireBuilder
-
Returns the carrier point.
- CARTESIAN - Static variable in class nxopen.cae.AssignNodalCSBuilder.CSType
-
cartesian
- CARTESIAN - Static variable in class nxopen.cae.BushingEADBuilder.CoordinateSystemDataType
-
use cartesian coordinate system data to orient the element
- CARTESIAN - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsCsysDataType
-
Use cartesian coordinate system data to orient the material.
- CARTESIAN - Static variable in class nxopen.cae.NodalForceReportBuilder.CSType
-
- CARTESIAN - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CsysType
-
- CARTESIAN - Static variable in class nxopen.cae.ShellEADBuilder.CoordinateSystemDataType
-
use cartesian coordinate system data to orient the material
- CARTESIAN - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipLocationTypes
-
Cartesian
- CARTESIAN - Static variable in class nxopen.fields.SpatialMap.TypeEnum
-
Map to cartesian csys
- CartesianCoordinateSystem - Interface in nxopen
-
- CASCADE_BUTTON - Static variable in class nxopen.menubar.MenuButton.Type
-
- CASCADE_MENU - Static variable in class nxopen.uf.UFUi.MenuType
-
- caseSensitive() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the case sensitive comparison.
- CAST - Static variable in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
-
Manufacturing restrictions to guarantee the manufacturing of the elements
- castCondition() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
-
Returns the cast condition
License requirements: None.
- castmode - Variable in class nxopen.mechatronics.UDPSignalClientBuilder.ConnectionInformationData
-
- castmode - Variable in class nxopen.mechatronics.UDPSignalServerBuilder.ConnectionInformationData
-
- CastRelief - Interface in nxopen.die
-
Represents a cast relief feature
To create or edit an instance of this class, use
CastReliefBuilder
Created in NX6.0.0
- castRelief(CastRelief) - Method in interface nxopen.die.DieCollection
-
- CastReliefBuilder - Interface in nxopen.die
-
- CastReliefData() - Constructor for class nxopen.die.CastReliefParentBuilder.CastReliefData
-
- castReliefParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the cast relief builder of the draw die punch.
- CastReliefParentBuilder - Interface in nxopen.die
-
Represents a Die Cast Relief sub feature.
- CastReliefParentBuilder.CastReliefData - Class in nxopen.die
-
- CATALOG - Static variable in class nxopen.AttributeTemplatesBuilder.TemplatesOptions
-
Templates currently residing in the loaded catalog.
- catalog() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the die base catalog.
- CATALOG - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
catalog
- catalogFilename() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the catalog filename.
- category() - Method in interface nxopen.annotations.BalloonNoteBuilder
-
Returns the category
License requirements: None.
- category() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the category
License requirements: None.
- category() - Method in interface nxopen.annotations.GeneralNoteBuilder
-
Returns the category
License requirements: None.
- category() - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
Returns the category
License requirements: None.
- category() - Method in interface nxopen.annotations.SpecificNoteBuilder
-
Returns the category
License requirements: None.
- category() - Method in interface nxopen.annotations.TableColumnBuilder
-
Returns the category specifies the type of column.
- CATEGORY - Static variable in class nxopen.assemblies.DesignElementBuilder.EditActionType
-
- category() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the category.
- category() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the category.
- Category - Class in nxopen.cae.optimization
-
Represents the category type
- Category - Interface in nxopen.layer
-
Represents a layer category.
- category() - Method in interface nxopen.mechatronics.AlignBodyBuilder
-
Returns the category.
- category() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
Returns the category.
- category() - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
Returns the category.
- category() - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
Returns the category.
- category - Variable in class nxopen.NXObject.AttributeInformation
-
Attribute category (may be null)
- category() - Method in interface nxopen.pdm.DesignElementRevision
-
Returns the category for design element.
- category() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
Returns the category.
- category() - Method in interface nxopen.validate.OverrideBuilder
-
Returns the category of override request.
- CategoryCollection - Interface in nxopen.layer
-
Represents a collection of layer categories
To obtain an instance of this class, refer to
BasePart
Created in NX3.0.0
- CategoryInfo() - Constructor for class nxopen.uf.UFLayer.CategoryInfo
-
- CategoryInfo(String, boolean[], String) - Constructor for class nxopen.uf.UFLayer.CategoryInfo
-
- categoryName() - Method in interface nxopen.ame.PropertyEvaluatorBuilder
-
Returns the category name given by the user
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- categoryName() - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
Returns the category name of Drag Data
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- categoryName() - Method in interface nxopen.validate.ResultObject
-
Returns the category name of check result.
- categoryType() - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
Returns the category type
License requirements: None.
- categoryType() - Method in interface nxopen.cae.optimization.DAOObjective
-
Returns the category type
License requirements: None.
- CATIA_PLY_GROUPS - Static variable in class nxopen.cae.LaminateImportedLayupBuilder.FileEnum
-
CATIA Ply Groups.
- Catiav4Creator - Interface in nxopen
-
- Catiav4Creator.SolidBodyOutputOption - Class in nxopen
-
Options for outputing solid bodies to CATIA V4
- Catiav4Importer - Interface in nxopen
-
- Catiav5Creator - Interface in nxopen
-
- Catiav5Creator.ExportFromOption - Class in nxopen
-
Export from options
- Catiav5Importer - Interface in nxopen
-
- Catiav5Importer.ImportToOption - Class in nxopen
-
Import To Option
- CAUCHY_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- CAVITY - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType
-
From cavity region
- CAVITY_CORE - Static variable in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
-
The method adds the standards of cavity and core
- CAVITY_MILL_INHERIT_TRIM_BNDS - Static variable in class nxopen.cam.CAMObject.Attr
-
- CAVITY_ONLY - Static variable in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
-
The method adds the standards of cavity
- CAVITY_POINTS - Static variable in class nxopen.cae.FluidDomainBuilder.IntExtType
-
The interior specified by cavity points.
- CAVITY_REGION - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.AssignToRegion
-
assign selected region faces to the Cavity region
- CAVITYAND_CORE - Static variable in class nxopen.tooling.MWDefineSheetsBuilder.DefineStepType
-
- cavityDepth() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the distance measured from the bend profile of the flange to the
base of the throat.
- CavityMilling - Interface in nxopen.cam
-
Represents a Cavity Milling Operation
To create or edit an instance of this class, use
CavityMillingBuilder
Created in NX7.5.0
- CavityMillingBuilder - Interface in nxopen.cam
-
- cavityOffset() - Method in interface nxopen.die.ThroatChildBuilder
-
Returns the offset distance measured from the Throat CSYS to the back
cavity area of the throat.
- caxis() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the C position
License requirements: None.
- CAXIS - Static variable in class nxopen.uf.UFPath.Axis
-
- CB_TERMINATE - Static variable in class nxopen.uistyler.DialogResponse
-
Callback routine has terminated.
- cboreDepth - Variable in class nxopen.features.Hole.CounterboreHoleData
-
Expression for counterbore depth
- cboreDiameter - Variable in class nxopen.features.Hole.CounterboreHoleData
-
Expression for counterbore diameter
- CCI - Static variable in class nxopen.geometricutilities.SmartVolumeProfileBuilder.CloseProfileRuleType
-
For subtract boolean operation,
extends the open profile to form the last complete intersection
if the profile lies outside the target excluding the coincident portion.
- CCLW - Static variable in class nxopen.cam.LaserCutDirection.Types
-
CCLW
- CCLW - Static variable in class nxopen.cam.MillingToolBuilder.ToolDirectionTypes
-
CCLW
- cCollectorId - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
-
- cCollectorId - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- CDF - Interface in nxopen
-
Represents a
CDF
, which is a representation of an NX color palette.
- CDT30 - Static variable in class nxopen.motion.TirePropertyCdBuilder.ModelType
-
- CDT30HPS - Static variable in class nxopen.motion.TirePropertyCdBuilder.ModelType
-
- CDT40 - Static variable in class nxopen.motion.TirePropertyCdBuilder.ModelType
-
- CDT50 - Static variable in class nxopen.motion.TirePropertyCdBuilder.ModelType
-
- CDTIRE - Static variable in class nxopen.motion.TireBuilder.Type
-
for CDTire Tire Model
- CEILING_TO_FLOOR - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
-
Ceiling to Floor
- cell() - Method in interface nxopen.annotations.TitleBlockCellBuilder
-
Returns the tabular note cell corresponding to this title block cell
License requirements: None.
- CellBuilder - Interface in nxopen.diagramming.tables
-
Represents a CellBuilder.
- cellFormatType() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the cell format
License requirements: None.
- cellPrefs - Variable in class nxopen.uf.UFPlist.ColPrefs
-
- CellPrefs() - Constructor for class nxopen.uf.UFTabnot.CellPrefs
-
- CellPrefs(UFTabnot.Format, int, boolean, UFTabnot.ZeroDisplay, int, double, double, double, UFTabnot.Just, UFTabnot.Just, double, double, boolean, boolean, boolean, double, double, boolean, int, int, int[], int[], int, UFTabnot.FitMethod[], Tag, int, int, int, String, String, String, String, boolean) - Constructor for class nxopen.uf.UFTabnot.CellPrefs
-
- CellRangeBuilder - Interface in nxopen.diagramming.tables
-
Represents a CellRangeBuilder.
- cells() - Method in interface nxopen.annotations.BaseTitleBlockBuilder
-
Returns the cells
License requirements: None.
- CellSettingsBuilder - Interface in nxopen.diagramming.tables
-
Represents a CellSettingsBuilder.
- cellSettingsBuilder() - Method in interface nxopen.diagramming.tables.TableBuilder
-
Returns the default cell border settings.
- CELLSIN_NEW_ROWS - Static variable in class nxopen.annotations.TableColumnBuilder.ScopeType
-
- cellText - Variable in class nxopen.uf.UFDraw.TabnotCellParams
-
- cellTypeName() - Method in interface nxopen.features.LatticeBuilder
-
Returns the name of the unit cell type that the user selects.
- cellWidth() - Method in interface nxopen.blockstyler.DoubleTable
-
Returns the CellWidth
License requirements: None.
- CENTER - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Center
- CENTER - Static variable in class nxopen.annotations.LeaderVerticalAttachment
-
Attach vertically to the center of the annotation
- CENTER - Static variable in class nxopen.annotations.StackVerticalAlignment
-
Align vertically along center of text box
- CENTER - Static variable in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
-
- CENTER - Static variable in class nxopen.annotations.TextJustification
-
- CENTER - Static variable in class nxopen.blockstyler.Node.Scroll
-
Scrolls the tree to bring the node at the center of the tree window
- CENTER - Static variable in class nxopen.cae.MeshControlBuilder.ProgressionTypes
-
- CENTER - Static variable in class nxopen.cae.PostAnnotation.TextAlignment
-
- CENTER - Static variable in class nxopen.cae.xyplot.TextAlignment
-
Center align text
- CENTER - Static variable in class nxopen.cam.ProbeOutputControl.OutputType
-
Center
- center - Variable in class nxopen.Conic.OrientationData
-
- CENTER - Static variable in class nxopen.DatumConstraint.Type
-
- CENTER - Static variable in class nxopen.diagramming.DiagrammingAlignment
-
Setting the center alignment
- CENTER - Static variable in class nxopen.diagramming.DiagrammingConnectionlabelposition
-
Centered
- CENTER - Static variable in class nxopen.diagramming.DiagrammingRepeatstartposition
-
Center
- CENTER - Static variable in class nxopen.diagramming.TextStyleBuilder.TextAlignmentType
-
- center() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the center of the handling core.
- center() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the location (center) for the heelpost
License requirements: None.
- center() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the center of the die hole.
- CENTER - Static variable in class nxopen.display.DecalBuilder.Anchor
-
anchor in the middle of decal image
- CENTER - Static variable in class nxopen.drawings.MultipleViewPlacementBuilder.Option
-
By Center
- CENTER - Static variable in class nxopen.drawings.StandardViewsBuilder.Placement
-
- center - Variable in class nxopen.Ellipse.ParametersData
-
- CENTER - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Center constraint
- CENTER - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Center constraint
- CENTER - Static variable in class nxopen.features.shipdesign.ProfileBuilder.Alignment
-
- CENTER - Static variable in class nxopen.features.shipdesign.StandardPartItemBuilder.Direction
-
center
- CENTER - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.EdgeReinforcementAlignmentMethod
-
Center the Edge Reinforcement on the selected edge
- CENTER - Static variable in class nxopen.geometricutilities.CurveRangeBuilder.AnchorPositionType
-
Anchor at the center of the curve
- center() - Method in interface nxopen.geometricutilities.CurveRangeBuilder
-
Returns the center
License requirements: None.
- CENTER - Static variable in class nxopen.geometricutilities.FrameOnPathBuilder.AnchorLocationType
-
Center position
- CENTER - Static variable in class nxopen.geometricutilities.ShapeFrameBuilder.AnchorAttachmentType
-
Anchor is attached to the center of the frame
- CENTER - Static variable in class nxopen.geometricutilities.SurfaceRangeBuilder.AnchorPositionType
-
Anchor at the center of the surface
- CENTER - Static variable in class nxopen.HumanData.SideType
-
Indicate the center of human
- CENTER - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point center of arc
- center - Variable in class nxopen.markup.Circle.CenterAndRadiusData
-
- center - Variable in class nxopen.markup.Ellipse.CenterAndRadiusData
-
- center - Variable in class nxopen.markup.Rectangle.CenterLengthAndWidthData
-
- CENTER - Static variable in class nxopen.PlaneTypes.MethodType
-
Center method
- CENTER - Static variable in class nxopen.PlotBuilder.JustificationOption
-
Center Justify
- CENTER - Static variable in class nxopen.PlotBuilder.XdisplayOption
-
X dimension center
- CENTER - Static variable in class nxopen.PlotBuilder.YdisplayOption
-
Y dimension center
- center - Variable in class nxopen.uf.UFCurve.Conic
-
- CENTER - Static variable in class nxopen.uf.UFCurve.EndType
-
- center - Variable in class nxopen.uf.UFEval.Arc
-
- center - Variable in class nxopen.uf.UFEval.Ellipse
-
- center - Variable in class nxopen.uf.UFEval.Hyperbola
-
- center - Variable in class nxopen.uf.UFEval.Parabola
-
- center - Variable in class nxopen.uf.UFUi.Attachment
-
- center() - Method in interface nxopen.weld.WeldFillStripBuilder
-
Returns the center of the fill strip.
- CENTER12 - Static variable in class nxopen.positioning.Constraint.Type
-
One geometry is positioned mid-way between two others
- CENTER22 - Static variable in class nxopen.positioning.Constraint.Type
-
An implicit plane between two geometries of one movable object is positioned mid-way between two others
- CENTER_ALONG_ROTARYAXIS - Static variable in class nxopen.cam.BladeCutStart.Type
-
center along rotaryaxis
- CENTER_ALTERNATE_CEILING_FIRST - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
-
Center Alternate, Ceiling First
- CENTER_ALTERNATE_FLOOR_FIRST - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
-
Center Alternate, Floor First
- CENTER_AND_LENGTHS - Static variable in class nxopen.features.ToolingBoxBuilder.Types
-
block with center point and lengths
- CENTER_CEILING_FLOOR - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
-
Start in Center then Ceiling then Floor
- CENTER_FLOOR_CEILING - Static variable in class nxopen.cam.GrooveMillingBuilder.LevelSequencingType
-
Start in Center then Floor then Ceiling
- CENTER_GRAVITY_MEASUREMENT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CENTER_GRAVITY_X - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Center of gravity for the X-direction
- CENTER_GRAVITY_Y - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Center of gravity for the Y-direction
- CENTER_GRAVITY_Z - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Center of gravity for the Z-direction
- CENTER_HOLE - Static variable in class nxopen.cam.HoleBossGeom.HoleBossTypes
-
Type: Center Hole
- CENTER_LEFT - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Center Left
- CENTER_LINE - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Display
-
center line
- CENTER_LINE - Static variable in class nxopen.cae.MarkerType0d
-
- CENTER_LINE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Center line marker
- CENTER_LINE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Center line marker
- CENTER_LINE - Static variable in class nxopen.cae.xyplot.PointMarker
-
Center line marker
- CENTER_LINE - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum
-
- CENTER_LINE - Static variable in class nxopen.features.sheetmetal.BendBuilder.BendLocationOptions
-
- CENTER_LINE - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.NeutralMethodType
-
Center line.
- CENTER_LINE - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeFont
-
- CENTER_LINE - Static variable in class nxopen.weld.JointmarkGuideBuilder.Location
-
Centerline
- CENTER_LINE_WITH_EXTENSION - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Display
-
center line with extension
- CENTER_OF_BOUNDING_BOX - Static variable in class nxopen.preferences.SessionAssemblies.DragHandlePositionOption
-
- CENTER_OF_EDGE - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
-
The flange is centered on the edge.
- CENTER_OF_MASS - Static variable in class nxopen.HumanData.EditDisplayBodyParts
-
Indicate edit display body parts named center of mass
- CENTER_OF_MASS - Static variable in class nxopen.HumanData.InverseKinematicsBodyParts
-
Indicate inverse kinematics body parts named center of mass
- CENTER_OF_MASS - Static variable in class nxopen.motion.Marker.MarkerType
-
Defines the center of mass for a link.
- CENTER_OF_ROTATION - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CENTER_OF_ROTATION - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CENTER_OPPOSITE_ROTARYAXIS - Static variable in class nxopen.cam.BladeCutStart.Type
-
center opposite rotaryaxis
- CENTER_PLUS_RHO - Static variable in class nxopen.features.EdgeBlendBuilder.Conic
-
- CENTER_PLUS_RHO - Static variable in class nxopen.geometricutilities.ConicCrossSection.DefineMethod
-
conic shape controlled by center and rho values
- CENTER_POINT - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Display
-
center point
- CENTER_POINT - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Center Point mode
- CENTER_POINT_AND_DIAMETER - Static variable in class nxopen.features.SphereBuilder.Types
-
Represents the type of sphere created by providing center point and diameter.
- CENTER_POINT_DIRECTION - Static variable in class nxopen.geometricutilities.SupportPlaneData.LockPlaneStatus
-
Lock support plane using center point and direction, this option should be used for Center Radius Arc only
- CENTER_RADIUS - Static variable in class nxopen.features.AestheticFaceBlendBuilder.CenterType
-
Center radius option.
- CENTER_RADIUS - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Center Radius mode
- CENTER_RIGHT - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Center Right
- CENTER_TANGENT - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Center Tangent mode
- CENTER_VALUE - Static variable in class nxopen.annotations.FitDisplayAlignment
-
Center value
- CENTER_VALUE_AND_FIT - Static variable in class nxopen.annotations.FitDisplayAlignment
-
Center value and Fit
- CENTER_VERTEX - Static variable in class nxopen.uf.UFSket.GeomVertex
-
- CenterAndRadiusData() - Constructor for class nxopen.markup.Circle.CenterAndRadiusData
-
- CenterAndRadiusData() - Constructor for class nxopen.markup.Ellipse.CenterAndRadiusData
-
- centerChordLaw() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the center chord law
License requirements: None.
- centerControlFlat() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the center control flat
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- centerControlTiltX() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the center control tilt x direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- centerControlTiltY() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the center control tilt y direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- centerControlTrimFlat() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the center control flat for trimming
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- centerControlX() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the center control x direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- centerControlY() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the center control y direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- centerControlZ() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the center control z direction
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- centerCoordinate() - Method in interface nxopen.drawings.DrawingViewBuilder
-
Returns the center coordinate
License requirements: None.
- centerCross() - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
Returns the center cross size
License requirements: None.
- centercsys - Variable in class nxopen.cae.BoxBoundingVolume.CsysEdgelengthsData
-
- centercsys - Variable in class nxopen.cae.CylinderBoundingVolume.CsysDiameterHeightData
-
- centerCurve() - Method in interface nxopen.cam.FlowBuilder
-
Returns the Cleanup Output, Tool End Boundary
License requirements: None.
- centerCurve() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the center curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- centerCurveEnd() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the center curve end
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- centerCurveStart() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the center curve start
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- CenterDiameterData() - Constructor for class nxopen.cae.SphereBoundingVolume.CenterDiameterData
-
- CENTERED - Static variable in class nxopen.annotations.LineWeldBuilder.IdLineType
-
- CENTERED - Static variable in class nxopen.features.vehicledesign.CrashBarrierBuilder.CrossPositionType
-
- CENTERED_LOOP_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
- CENTERED_SEAM_WELD - Static variable in class nxopen.annotations.LineWeldBuilder.IdLineType
-
- CENTERED_SPOT_WELD - Static variable in class nxopen.annotations.LineWeldBuilder.IdLineType
-
- centerFlag - Variable in class nxopen.uf.UFDrf.WeldSymbols
-
- centerHeight() - Method in interface nxopen.features.shipdesign.DeckBuilder
-
Returns the expression containing the overall height of the camber shape at the center
of the ship in the selected plane.
- centerHole() - Method in interface nxopen.die.PadChildBuilder
-
Returns the center hole switch of the die pad, if true the center hole will be created in the pad, if false it will not.
- centerHole() - Method in interface nxopen.die.PadParentBuilder
-
Returns the center hole switch of die pads, if true the center hole will be created in the pads, if false they will not.
- centeringMarkExtension() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the length of centering marks extension from inner border
License requirements: None.
- centeringMarkExtension() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- centeringMarkLength() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the length of centering mark.
- centeringMarkLength() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the centering mark length
License requirements: None.
- centeringMarksColorWidth() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the color and width of centering marks.
- centeringMarksColorWidth() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the centering marks color width
License requirements: None.
- centeringMarksExtension() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the length of centering marks extension from inner border.
- centeringMarksExtension() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the centering marks extension
License requirements: None.
- centeringMarksHorizontal() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the horizontal centering mark used to show the type of centering mark like LeftArrow/RightArrow.
- centeringMarksHorizontal() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the centering marks horizontal
License requirements: None.
- centeringMarksVertical() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the vertical centering mark used to show the type of centering mark like TopArrow/BottomArrow.
- centeringMarksVertical() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the centering marks vertical
License requirements: None.
- CenterLengthAndWidthData() - Constructor for class nxopen.markup.Rectangle.CenterLengthAndWidthData
-
- CENTERLINE - Static variable in class nxopen.annotations.AssociativityLineOption
-
Centerline -
Linear
Bolt circle
Circular
- centerline() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the centerline
License requirements: None.
- Centerline - Interface in nxopen.annotations
-
Represents a drafting centerline
This is an abstract class.
- CENTERLINE - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.FontTypes
-
Centerline
- CENTERLINE - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI centerline type
- CENTERLINE - Static variable in class nxopen.assemblies.ProductOutlineBuilder.LineFont
-
Center Line
- CENTERLINE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeFont
-
Centerline font
- CENTERLINE - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisLineFont
-
Centerline font
- CENTERLINE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeFont
-
Centerline font
- centerline() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the section containing the centerline of the bead.
- CENTERLINE - Static variable in class nxopen.display.GridBuilder.LineStyleType
-
- CENTERLINE - Static variable in class nxopen.DisplayableObject.ObjectFont
-
- CENTERLINE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Font
-
CenterLine
- CENTERLINE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.FontType
-
Deprecated.
- CENTERLINE - Static variable in class nxopen.drawings.SectionLineStyleBuilder.FontStyle
-
Deprecated.
- centerLine() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the center line:
An existing curve/path on the sheet that defines the full extent of the offset feature required.
- centerline() - Method in interface nxopen.features.shipdesign.HullBuilder
-
Returns the plane representing the center line of the hull.
- CENTERLINE - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Font
-
Centerline Font
- CENTERLINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- CENTERLINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineFontEnum
-
Centerline
- CENTERLINE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- CENTERLINE - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.OutlineTypeAPI
-
- CENTERLINE - Static variable in class nxopen.LineFontBuilder.LineFontType
-
Centerline line font
- CENTERLINE - Static variable in class nxopen.preferences.Font
-
Centerline
- CENTERLINE - Static variable in class nxopen.preferences.PartDrafting.FontType
-
CenterLine
- CENTERLINE - Static variable in class nxopen.preferences.PartModeling.GridKnotLineFontType
-
- CENTERLINE - Static variable in class nxopen.preferences.PartObject.LineFontType
-
Centerline
- CENTERLINE - Static variable in class nxopen.preferences.SessionModeling.PolylineStyleType
-
- CENTERLINE - Static variable in class nxopen.routing.StockBuilder.StockStyleType
-
Centreline
- CENTERLINE - Static variable in class nxopen.routing.StockStyleBuilder.StockStyle
-
- centerline() - Method in interface nxopen.SketchConstraintBuilder
-
Returns the centerline for a symmetric constraint type
License requirements: None.
- centerLine() - Method in interface nxopen.SketchMakeSymmetricBuilder
-
Returns the function returns the center line of a symmetric constraint.
- CENTERLINE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CENTERLINE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CENTERLINE - Static variable in class nxopen.ViewDependentDisplayManager.Font
-
- CENTERLINE - Static variable in class nxopen.weld.WeldBeadPathBuilder.OffsetMethodType
-
centerline of overlapping sheets
- Centerline2d - Interface in nxopen.annotations
-
Represents a 2D centerline
To create or edit an instance of this class, use
Centerline2dBuilder
Created in NX6.0.0
- Centerline2dBuilder - Interface in nxopen.annotations
-
Builder for creating 2D Centerline.
- Centerline2dBuilder.Offset - Class in nxopen.annotations
-
the valid types of 2D Centerline offset method
- Centerline2dBuilder.Types - Class in nxopen.annotations
-
the valid types of 2D Centerline, applicable only for creation
- Centerline2dSettingsBuilder - Interface in nxopen.annotations
-
Represents a Builder for Centerline2dSettings.
- Centerline3d - Interface in nxopen.annotations
-
Represents a 3D centerline
To create or edit an instance of this class, use
Centerline3dBuilder
Created in NX6.0.0
- Centerline3dBuilder - Interface in nxopen.annotations
-
Builder for creating 3D Centerline.
- Centerline3dBuilder.Offset - Class in nxopen.annotations
-
the valid types of 3D Centerline offset method
- Centerline3dSettingsBuilder - Interface in nxopen.annotations
-
Represents a Builder for Centerline3dSettings.
- CENTERLINE_COMPONENT_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType
-
- CENTERLINE_Y - Static variable in class nxopen.annotations.FrameBarElements
-
- CenterlineBuilder - Interface in nxopen.annotations
-
Represents a Base Centerline Builder for all types of centerlines
This is an abstract class, and cannot be instantiated.
- CenterlineCollection - Interface in nxopen.annotations
-
- centerlineCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- centerlineCycle() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the centerline cycle
License requirements: None.
- CenterlineData() - Constructor for class nxopen.die.RibChildBuilder.CenterlineData
-
- CenterlineDrillTurning - Interface in nxopen.cam
-
Represents a Centerline Drill Turning operation
To create or edit an instance of this class, use
CenterlineDrillTurningBuilder
Created in NX7.5.0
- CenterlineDrillTurningBuilder - Interface in nxopen.cam
-
- CenterlineDrillTurningBuilder.CycleTypes - Class in nxopen.cam
-
the centerline cycle types .
- CenterlineDrillTurningBuilder.DepthReferenceTypes - Class in nxopen.cam
-
the depth reference option types .
- CenterlineDrillTurningBuilder.DepthTypes - Class in nxopen.cam
-
the depth option types .
- CenterlineDrillTurningBuilder.DrillingLocationTypes - Class in nxopen.cam
-
the drilling location .
- CenterlineDrillTurningBuilder.DwellTypes - Class in nxopen.cam
-
the dwell modes .
- CenterlineDrillTurningBuilder.FinalRetractTypes - Class in nxopen.cam
-
the retract types for simulated cycles .
- CenterlineDrillTurningBuilder.OutputOptionTypes - Class in nxopen.cam
-
the output option .
- CenterlineDrillTurningBuilder.RemovalIncrementTypes - Class in nxopen.cam
-
the removal increment types .
- CenterlineDrillTurningBuilder.SpindleStopTypes - Class in nxopen.cam
-
the spindle stop types .
- CenterlineDrillTurningBuilder.StartPositionTypes - Class in nxopen.cam
-
the start position .
- CenterlineDrillVariableIncrementBuilder - Interface in nxopen.cam
-
Represents a Turn Avoidance Path Points Builder .
- CenterlineDrillVariableIncrementBuilder.VariableIncrementListData - Class in nxopen.cam
-
- centerlineInfo - Variable in class nxopen.uf.UFDrf.AskCenterlineInfoData
-
- CenterlineInfo() - Constructor for class nxopen.uf.UFDrf.CenterlineInfo
-
- CenterlineInfo(int, UFDrf.DraftAidLine[], int, UFDrf.ArcInfo[], int, UFDrf.AssocInfo[]) - Constructor for class nxopen.uf.UFDrf.CenterlineInfo
-
- centerlineJigOnPlane() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the Centerlinejig on plane builder
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- centerlineLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the left B Pillar centerline geometry.
- centerlineLeft() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the left additional pillar centerline geometry.
- centerlineLength() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the length from the location to the flange
License requirements: None.
- centerlineLength() - Method in interface nxopen.tooling.WireHoleBuilder
-
Returns the centerline length to create wire hole
License requirements: None.
- centerlineOrigin - Variable in class nxopen.uf.UFDrf.AskCenterlineInfoData
-
- centerlineProjection() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the projection method to apply to the centerline to place it on the sewn faces.
- centerlineRight() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarWizardBuilder
-
Returns the right B Pillar centerline geometry.
- centerlineRight() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarWizardBuilder
-
Returns the right additional pillar centerline geometry.
- centerlines() - Method in interface nxopen.annotations.AnnotationManager
-
Centerlines collection .
- centerLines() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the center lines
License requirements: None.
- centerlines() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the centerlines toggle on the GENERAL tab of the View Style Dialog
License requirements: None.
- centerlines() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the status of center line.
- centerLines - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- CenterlineSettingsBuilder - Interface in nxopen.annotations
-
Represents a Builder for Centerline Settings.
- CenterlineSettingsBuilder.CenterlineThickness - Class in nxopen.annotations
-
the types of centerline thickness
- centerlineSlotAttributes() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the centerline slot attributes
License requirements: None.
- centerlineSlotCreate() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the toggle to create the centerline slot
License requirements: None.
- centerlineSlotDepth() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the centerline slot depth
License requirements: None.
- centerlineSlotDirection() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the centerline slot direction
License requirements: None.
- centerlineSlotWidth() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the centerline slot width
License requirements: None.
- centerlineSymbolCfw - Variable in class nxopen.uf.UFDrf.SymbolPreferences
-
- centerlineSymbolColor() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the centerline symbol color
License requirements: None.
- centerlineSymbolWidth() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the centerline symbol width
License requirements: None.
- centerlineType - Variable in class nxopen.uf.UFDrf.AskCenterlineInfoData
-
- centerlineXyOffset() - Method in interface nxopen.die.RibChildBuilder
-
Returns the centerline xy offset of the die rib.
- centerlineXyOffset() - Method in interface nxopen.die.RibParentBuilder
-
Returns the centerline xy offset of die ribs.
- centerlineYLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label color
License requirements: None.
- centerlineYLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label font
License requirements: None.
- centerlineYLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label italicized
License requirements: None.
- centerlineYLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label width
License requirements: None.
- centerlineYStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
-
Returns the style centerline y
License requirements: None.
- centerlineYTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic color
License requirements: None.
- centerlineYTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the _centerline y tic display type
License requirements: None.
- centerlineYTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic font
License requirements: None.
- centerlineYTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic length
License requirements: None.
- centerlineYTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic width
License requirements: None.
- centerLoadBendingStressMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum bending stress under a center load.
- centerLoadDisplacement(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the displacement under a center load.
- centerLoadDisplacementMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum displacement under a center load.
- centerLoadMoment(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the moment under a center load.
- centerLoadMomentMaximum(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum moment under a center load.
- centerLoadShearForce(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the shear force under a center load.
- centerLoadShearForceMaximum(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear force under a center load.
- centerLoadSlope(double, double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the slope under a center load.
- centerLoadSlopeMaximum(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum slope under a center load.
- CenterMark - Interface in nxopen.annotations
-
Represents a center mark class
To create or edit an instance of this class, use
CenterMarkBuilder
Created in NX6.0.0
- CENTERMARK - Static variable in class nxopen.features.sheetmetal.HoleTreatmentBuilder.TreatmentType
-
- CenterMarkBuilder - Interface in nxopen.annotations
-
Builder for creating Center Mark.
- CenterMarkSettingsBuilder - Interface in nxopen.annotations
-
Represents a Builder for CenterMark Settings.
- centermethod - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
Method used to define the sphere center
- centerNode(NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Adjusts the display of the part and fits the selected weld points in the center of the graphics window.
- centerOfGravity() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the center of gravity
License requirements: None.
- centerOfMass - Variable in class nxopen.uf.UFWeight.Properties
-
- centerOption() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the center option
License requirements: None.
- centerPoint() - Method in interface nxopen.annotations.ArcComponent
-
Returns the arc center point in absolute coordinates.
- CENTERPOINT - Static variable in class nxopen.annotations.CircleCenterlineBuilder.Types
-
Centerline using Centerpoint Method
- centerpoint - Variable in class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
Sphere manual center position.
- centerpoint - Variable in class nxopen.cae.SphereBoundingVolume.CenterDiameterData
-
- centerPoint() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
Returns the center
License requirements: None.
- centerPoint() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the center point
License requirements: None.
- centerPoint() - Method in interface nxopen.cam.LaserCutoutDefinition
-
Returns the Center Point
License requirements: None.
- centerPoint() - Method in interface nxopen.Conic
-
Returns the center.
- centerPoint() - Method in interface nxopen.features.AssociativeArcBuilder
-
- centerPoint() - Method in interface nxopen.features.BlendCornerBuilder
-
Returns the center point.
- centerPoint() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the center point:
An existing point on the input sheet body is selected as the reference from which the feature is defined.
- centerPoint() - Method in interface nxopen.features.SphereBuilder
-
Returns the center point of the Sphere.
- centerPoint() - Method in interface nxopen.features.StudioXformBuilder
-
- centerPoint() - Method in interface nxopen.geometricutilities.CircularPattern
-
- centerPoint() - Method in interface nxopen.mechatronics.CollisionShapeBuilder
-
Returns the center point.
- centerPoint() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the center point
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- centerPoint() - Method in interface nxopen.SketchEllipseBuilder
-
Returns the center point
License requirements: None.
- centerPoint() - Method in interface nxopen.SketchPolygonBuilder
-
Returns the center point
License requirements: None.
- centerPoint - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
-
- centerPointOption() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the center point output option of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- centerPointReference() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the center point reference
License requirements: None.
- centerPointReferenceCsys() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the center point reference coordinate system
License requirements: None.
- centerPointX() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the center point X coordinate
License requirements: None.
- centerPointX() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the circle center point X coordinate
License requirements: None.
- centerPointX() - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
Returns the sphere center point X coordinate
License requirements: None.
- centerPointX() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the torus center point x coordinate
License requirements: None.
- centerPointY() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the center point Y coordinate
License requirements: None.
- centerPointY() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the circle center point Y coordinate
License requirements: None.
- centerPointY() - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
Returns the sphere center point Y coordinate
License requirements: None.
- centerPointY() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the torus center point y coordinate
License requirements: None.
- centerPointZ() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the center point Z coordinate
License requirements: None.
- centerPointZ() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the circle center point Z coordinate
License requirements: None.
- centerPointZ() - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
Returns the sphere center point Z coordinate
License requirements: None.
- centerPointZ() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the torus center point z coordinate
License requirements: None.
- centerRadiusLaw() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the center radius law
License requirements: None.
- centerRadiusLockedPlaneDirection() - Method in interface nxopen.features.AssociativeArcBuilder
-
- centerSymbol() - Method in interface nxopen.annotations.LineWeldData
-
Returns the flag indicating whether the weld symbol is at center of
reference line, applicable only to spot and seam symbols
License requirements: None.
- centervaluetag - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndSectionValueData
-
The conic center value expression of this chain set collector
- CENTIGRADE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.TemperatureUnitsOptions
-
Use Centigrade
- CENTIMETER_CENTINEWTON - Static variable in class nxopen.motion.FlexBodyBuilder.UnitSystemType
-
(cN)(cm)(kg)
- CENTIMETERS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
-
Use centimeters
- CENTINEWTON_CENTIMETER - Static variable in class nxopen.cae.DurSpecialistDataSources.UnitSystem
-
cN cm kg
- CENTRAL - Static variable in class nxopen.ame.AMEManager.CreateStationType
-
- CENTRAL_EUROPEAN - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies a Eastern European character set
- centralAngle() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the central angle of a cylinder/cone.
- CENTRED - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
-
centred
- centrifugalForce(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the centrifugal force from velocity, radius and mass.
- CENTROID - Static variable in class nxopen.cae.responsesimulation.DataLocation.Element
-
- CENTROID - Static variable in class nxopen.cae.responsesimulation.ElementLocation
-
- CENTROID - Static variable in class nxopen.cae.Result.ElementValueCriterion
-
- CENTROID - Static variable in class nxopen.MeasureBodies.ActiveValue
-
- centroid() - Method in interface nxopen.MeasureBodies
-
Returns the centroid point of the measurement
License requirements: None.
- centroid - Variable in class nxopen.uf.UFFltr.AskBoxOfAssyData
-
- centroid - Variable in class nxopen.uf.UFFltr.AskBoxZoneData
-
- centroid - Variable in class nxopen.uf.UFSf.BodyAskVolumeAndCentroidData
-
- CERAMICS - Static variable in class nxopen.PhysicalMaterial.Category
-
Ceramics
- CERT_PT_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- CERT_PT_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- CERTIFICATION_POINT - Static variable in class nxopen.uf.UFConstants
-
- CERTIFICATION_POINT_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- cFaceId - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
-
- cFaceId - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- CfdAutoRefinementConstraint - Interface in nxopen.cae
-
The automatic refinement constraint is used by surface wrap recipes
To create or edit an instance of this class, use
CfdAutoRefinementConstraintBuilder
Created in NX11.0.0
- CfdAutoRefinementConstraintBuilder - Interface in nxopen.cae
-
- CfdAutoRefinementConstraintBuilder.LocalSubdivisions - Class in nxopen.cae
-
The maximum local subdivision
- CfdAutoRefinementConstraintBuilder.Priority - Class in nxopen.cae
-
The priority level
- CfdAutoRefinementConstraintBuilder.Sizing - Class in nxopen.cae
-
The sizing option
- CfdAutoRefinementConstraintCollection - Interface in nxopen.cae
-
- cfdAutoRefinementConstraints() - Method in interface nxopen.cae.BaseFEModel
-
Returns the fluid domain automatic refinement constraint collection belonging to this fem part .
- CfdContactPreventionConstraint - Interface in nxopen.cae
-
The contact prevention constraint is a type of constraint which is used by the
Fluid Domain Recipe to generate a fluid domain.
- CfdContactPreventionConstraintBuilder - Interface in nxopen.cae
-
- CfdContactPreventionConstraintBuilder.Contact - Class in nxopen.cae
-
The contact type.
- CfdContactPreventionConstraintBuilder.LocalSubdivisions - Class in nxopen.cae
-
The local subdivision.
- CfdContactPreventionConstraintBuilder.Priority - Class in nxopen.cae
-
The priority level.
- CfdContactPreventionConstraintBuilder.Sizing - Class in nxopen.cae
-
The sizing option.
- CfdContactPreventionConstraintCollection - Interface in nxopen.cae
-
- cfdContactPreventionConstraints() - Method in interface nxopen.cae.BaseFEModel
-
Returns the fluid domain contact prevention constraint collection belonging to this fem part .
- CfdLocalResolutionConstraint - Interface in nxopen.cae
-
The local resolution constraint is a type of constraint which is used by the
Fluid Domain Recipe to generate a fluid domain.
- CfdLocalResolutionConstraintBuilder - Interface in nxopen.cae
-
- CfdLocalResolutionConstraintBuilder.LocalSubdivisions - Class in nxopen.cae
-
The local subdivision.
- CfdLocalResolutionConstraintBuilder.Priority - Class in nxopen.cae
-
The priority level.
- CfdLocalResolutionConstraintBuilder.ResolutionDensity - Class in nxopen.cae
-
The Resolution density type.
- CfdLocalResolutionConstraintBuilder.Sizing - Class in nxopen.cae
-
The sizing option.
- CfdLocalResolutionConstraintCollection - Interface in nxopen.cae
-
- cfdLocalResolutionConstraints() - Method in interface nxopen.cae.BaseFEModel
-
Returns the fluid domain local resolution constraint collection belonging to this fem part .
- cfi() - Method in interface nxopen.UFSession
-
- cFlag - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
-
- cFlag - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
-
- cFlag - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- cFlag - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- cfw - Variable in class nxopen.annotations.Lettering
-
Color, font, and width for lettering
- Cfw() - Constructor for class nxopen.uf.UFDrf.Cfw
-
- Cfw(int, int, UFDrf.LineWidth) - Constructor for class nxopen.uf.UFDrf.Cfw
-
- cfw - Variable in class nxopen.uf.UFDrf.Lettering
-
- CgfxAttr - Interface in nxopen.display
-
- CgfxAttrCollection - Interface in nxopen.display
-
- CgfxAttributeValueColor3Builder - Interface in nxopen.display
-
- CgfxAttributeValueColor4Builder - Interface in nxopen.display
-
- CgfxAttributeValueFileBuilder - Interface in nxopen.display
-
- CgfxAttributeValueFloat3Builder - Interface in nxopen.display
-
- CgfxAttributeValueFloat4Builder - Interface in nxopen.display
-
- CgfxAttributeValueIntegerBuilder - Interface in nxopen.display
-
- CgfxAttributeValueNumberBuilder - Interface in nxopen.display
-
- cgfxAttrs() - Method in interface nxopen.BasePart
-
Returns the Display.CgfxAttrCollection instance belonging to this part
Created in NX5.0.6
- cgfxMattex() - Method in interface nxopen.BasePart
-
Returns the Display.CgfxMattexCollection instance belonging to this part
Created in NX5.0.6
- CgfxMattex - Interface in nxopen.display
-
- CgfxMattexBuilder - Interface in nxopen.display
-
- CgfxMattexBuilder.Technique - Class in nxopen.display
-
Deprecated.
The technique is an index to a technique name in a list found in the CgFX file.
- CgfxMattexBuilder.TextureSpace - Class in nxopen.display
-
- CgfxMattexBuilder.TextureSpaceShader - Class in nxopen.display
-
Deprecated.
The texture space shader type indicates the type of texture space shader to use for CgFX shader
- CgfxMattexBuilder.UseCameraDirectionPlane - Class in nxopen.display
-
Deprecated.
The option indicates which texture space vectors are updated upon Update Texture to Camera Direction action
- CgfxMattexCollection - Interface in nxopen.display
-
- CGM - Static variable in class nxopen.DxfdwgCreator.ExportAsOption
-
export as cgm
- cgm() - Method in interface nxopen.UFSession
-
- CGM_FILE_SELECTION - Static variable in class nxopen.formboard.FaceAnnotationBuilder.Types
-
Import CGM file by browsing a CGM file
- CGM_FORMAT - Static variable in class nxopen.uf.UFPlot.Format
-
- CGMBuilder - Interface in nxopen
-
Represents a
CGMBuilder
to be used when exporting the Current Display
or drawing sheets to a CGM.
- CGMBuilder.ActionOption - Class in nxopen
-
Specifies the action option to be used when running Teamcenter
- CGMBuilder.Color - Class in nxopen
-
Specifies the color option to use when creating the CGM
- CGMBuilder.ImageResolutionOption - Class in nxopen
-
Specifies the image resolution when exporting a raster image
- CGMBuilder.MultipleOption - Class in nxopen
-
Specifies how to export multiple drawing sheets in Native mode
- CGMBuilder.OutputTextOption - Class in nxopen
-
Specifies the text option, as either text or polylines
- CGMBuilder.RelationOption - Class in nxopen
-
Specifies the relation to use when exporting a CGM to Teamcenter
- CGMBuilder.SizeOption - Class in nxopen
-
Specifies the size option of the CGM.
- CGMBuilder.UnitsOption - Class in nxopen
-
Specifies which units are associated to the dimensions
- CGMBuilder.Vdc - Class in nxopen
-
Specifies the VDC coordinates to use when creating the CGM
- CGMBuilder.Width - Class in nxopen
-
Specifies the primary selection of which type of width assignment to use.
- cgmflBrsr() - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
- CGMImporter - Interface in nxopen
-
Used to import a CGM file into the work part.
- CHAIN - Static variable in class nxopen.annotations.DimensionSetBuilder.DimensionSetMethod
-
Part of a chain
- CHAIN - Static variable in class nxopen.annotations.DimensionType
-
Chain dimension
- CHAIN - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Chain
- CHAIN - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions
-
- CHAIN - Static variable in class nxopen.geometricutilities.ReduceSurfaceRadiusBuilder.FaceSelectionSpecification
-
- chain1Continuity() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the chain 1 continuity
License requirements: None.
- chain2Continuity() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the chain 2 continuity
License requirements: None.
- chainAllPoints() - Method in interface nxopen.features.FitCurveBuilder
-
Chains all the points in work part based on one selected point and evaluates the curve.
- chainData - Variable in class nxopen.uf.UFModl.ReblendFaceData
-
- ChainDimension - Interface in nxopen.annotations
-
Represents a chain dimension.
- chained - Variable in class nxopen.uf.UFModl.ReblendFace
-
- CHAINED_POINTS - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes
-
Chain using one or two points
- ChainedPoints() - Constructor for class nxopen.uf.UFUi.ChainedPoints
-
- ChainedPoints(double[], Tag) - Constructor for class nxopen.uf.UFUi.ChainedPoints
-
- chainElementIndex() - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
Returns the index used by chain elements when exporting the SPF file
License requirements: None.
- chaining() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
- chainingrule - Variable in class nxopen.ApparentChainingRule.Data
-
Selection Intent method, either of Connected Curves, Tangent Curves or Single Curve.
- chainingtolerance - Variable in class nxopen.ApparentChainingRule.Data
-
Gap tolerance
- chainingTolerance() - Method in interface nxopen.features.ExtrudeBuilder
-
Returns the chaining tolerance
License requirements: None.
- chainingTolerance() - Method in interface nxopen.features.SweepAlongGuideBuilder
-
Returns the chaining tolerance
License requirements: None.
- chainingTolerance() - Method in interface nxopen.Section
-
Returns the chaining tolerance
License requirements: gateway ("UG GATEWAY")
.
- ChainJointBuilder - Interface in nxopen.mechatronics
-
- chainOffset() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the offset between dimension lines of chain dimensions
License requirements: None.
- chainOffset() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the offset between dimension lines of chain dimensions
License requirements: None.
- chainOffset - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- chainOffset - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- ChainOfPrerequisitesData() - Constructor for class nxopen.cae.SimSolveManager.ChainOfPrerequisitesData
-
- chainSelectedCurves() - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Finds all curves attached end-to-end with the current list of selected
curves.
- ChainsetAndSectionValueData() - Constructor for class nxopen.features.EdgeBlendBuilder.ChainsetAndSectionValueData
-
- ChainsetAndStatusData() - Constructor for class nxopen.features.EdgeBlendBuilder.ChainsetAndStatusData
-
- ChainsetData() - Constructor for class nxopen.features.EdgeBlendBuilder.ChainsetData
-
- chainWithinFeature() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the ChainWithinFeature
License requirements: None.
- chainWithinFeature() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the ChainWithinFeature
License requirements: None.
- CHAMFER - Static variable in class nxopen.annotations.DimensionType
-
Chamfer dimension
- CHAMFER - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Chamfer
- Chamfer - Interface in nxopen.features
-
Represents a chamfer feature.
- CHAMFER - Static variable in class nxopen.features.sheetmetal.CornerTreatmentBuilder.CornerTreatmentType
-
- CHAMFER - Static variable in class nxopen.features.StepBuilder.StepNewTypes
-
Adds a step at the edge of a face similar to a chamfer
- CHAMFER - Static variable in class nxopen.features.StepBuilder.StepTypes
-
Adds a step at the edge of a face similar to a chamfer
- CHAMFER - Static variable in class nxopen.tooling.CornerDesignBuilder.CornerTypeOpt
-
chamfer
- CHAMFER_AFTER - Static variable in class nxopen.annotations.TextComponent.TextType
-
chamfer text after
- CHAMFER_ANGLE - Static variable in class nxopen.annotations.TextComponent.TextType
-
chamfer angle symbol text
- CHAMFER_BEFORE - Static variable in class nxopen.annotations.TextComponent.TextType
-
chamfer text before
- CHAMFER_EQUAL_SETBACK - Static variable in class nxopen.features.sheetmetal.BreakCornerBuilder.TypeOptions
-
- CHAMFER_FORM_ANGLESIZE - Static variable in class nxopen.uf.UFDrf.ChamferDimensionForm
-
- CHAMFER_FORM_SIZE - Static variable in class nxopen.uf.UFDrf.ChamferDimensionForm
-
- CHAMFER_FORM_SIZEANGLE - Static variable in class nxopen.uf.UFDrf.ChamferDimensionForm
-
- CHAMFER_FORM_SYMBOL - Static variable in class nxopen.uf.UFDrf.ChamferDimensionForm
-
- CHAMFER_HOLE - Static variable in class nxopen.cam.HoleBossGeom.HoleBossTypes
-
Type: Chamfer Hole
- CHAMFER_LINEAR_CHAMFER_DIM - Static variable in class nxopen.uf.UFDrf.ChamferDimensionLeaderType
-
- CHAMFER_NONE_SYMBOL - Static variable in class nxopen.uf.UFDrf.ChamferDimensionSymbolType
-
- CHAMFER_PARALLEL_LEADER - Static variable in class nxopen.uf.UFDrf.ChamferDimensionLeaderType
-
- CHAMFER_PERPENDICULAR_LEADER - Static variable in class nxopen.uf.UFDrf.ChamferDimensionLeaderType
-
- CHAMFER_PREFIX_SYMBOL - Static variable in class nxopen.uf.UFDrf.ChamferDimensionSymbolType
-
- CHAMFER_SIZE - Static variable in class nxopen.annotations.TextComponent.TextType
-
chamfer size text
- CHAMFER_SUFFIX_SYMBOL - Static variable in class nxopen.uf.UFDrf.ChamferDimensionSymbolType
-
- CHAMFER_TEXTABOVE_LEADER_NOSTUB - Static variable in class nxopen.uf.UFDrf.ChamferDimensionStubType
-
- CHAMFER_TEXTABOVE_STUB - Static variable in class nxopen.uf.UFDrf.ChamferDimensionStubType
-
- CHAMFER_TEXTAFTER_LEADER_NOSTUB - Static variable in class nxopen.uf.UFDrf.ChamferDimensionStubType
-
- CHAMFER_TEXTAFTER_STUB - Static variable in class nxopen.uf.UFDrf.ChamferDimensionStubType
-
- CHAMFER_TOOL - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
-
Chamfer MillTool
- CHAMFER_XSYMBOL - Static variable in class nxopen.annotations.TextComponent.TextType
-
chamfer x symbol text
- chamferAngle() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the chamfer angle.
- chamferBothSides() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the chamfer both sides
License requirements: None.
- ChamferBuilder - Interface in nxopen.features
-
Represents the chamfer builder data.
- ChamferBuilder.ChamferOption - Class in nxopen.features
-
This enum represents the chamfer parameter options
- ChamferBuilder.OffsetMethod - Class in nxopen.features
-
This enum represents the offset method options
- ChamferDimension - Interface in nxopen.annotations
-
Represents a chamfer dimension
To create or edit an instance of this class, use
ChamferDimensionBuilder
Created in NX4.0.0
- ChamferDimensionBuilder - Interface in nxopen.annotations
-
- ChamferDimensionData() - Constructor for class nxopen.uf.UFDrf.ChamferDimensionData
-
- ChamferDimensionData(UFDrf.ChamferDimensionForm, UFDrf.ChamferDimensionStubType, UFDrf.ChamferDimensionLeaderType, UFDrf.ChamferDimensionSymbolType, String, double) - Constructor for class nxopen.uf.UFDrf.ChamferDimensionData
-
- chamferDimensionData - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- chamferDimensionData - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- ChamferDimensionPreferences - Interface in nxopen.annotations
-
Represents chamfer dimension preferences .
- chamferDistance() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the chamfer distance of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- chamferDistance() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the chamfer distance of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- chamferEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add chamfer relation recognition for the last curves added to curve collector
License requirements: None.
- chamferFace() - Method in interface nxopen.features.LabelChamferBuilder
-
Returns the chamfer face
License requirements: None.
- chamferFeed() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the chamfer feed builder (inheritable Feed)
License requirements: cam_base ("CAM BASE")
.
- ChamferForm - Class in nxopen.annotations
-
Specifies the chamfer dimension form
- chamferForm() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the chamfer dimension form
License requirements: None.
- ChamferLeaderPlacement - Class in nxopen.annotations
-
Specifies the chamfer dimension leader placement relative to the chamfer
- chamferLeaderType() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the chamfer dimension leader type
License requirements: None.
- chamferLengthBuilder() - Method in interface nxopen.cam.MillToolBuilder
-
Returns the Chamfer Length (inheritable double)
License requirements: None.
- ChamferMilling - Interface in nxopen.cam
-
Represents a Chamfer Milling Operation
To create or edit an instance of this class, use
ChamferMillingBuilder
Created in NX9.0.2
- ChamferMillingBuilder - Interface in nxopen.cam
-
- ChamferMillingBuilder.ChamferReferenceType - Class in nxopen.cam
-
Available types for chamfer reference
- chamferOffset() - Method in interface nxopen.cam.ChamferMillingBuilder
-
Returns the chamfer offset
License requirements: None.
- chamferOption() - Method in interface nxopen.SketchChamferBuilder
-
Returns the chamfer options that specify what type of chamfer is to be created
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- chamferOrientation() - Method in interface nxopen.annotations.BaseChamferDimension
-
Returns a value of chamfer dimension linear leader parallel
License requirements: None.
- ChamferOrientationType - Class in nxopen.annotations
-
Specifies the linear chamfer dimension orientation
- chamferReference() - Method in interface nxopen.cam.ChamferMillingBuilder
-
Returns the chamfer reference
License requirements: None.
- chamferSeparator() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the chamfer separator type
License requirements: None.
- ChamferSeparatorType - Class in nxopen.annotations
-
Specifies the chamfer dimension separator type
- chamferSpaceFactor() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the chamfer dimension space factor
License requirements: None.
- ChamferStubType - Class in nxopen.annotations
-
Specifies the chamfer dimension stub type
- chamferStubType() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the chamfer dimension stub type
License requirements: None.
- chamferSymbolName() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the chamfer dimension symbol name
License requirements: None.
- ChamferSymbolPlacement - Class in nxopen.annotations
-
Specifies the chamfer dimension symbol placement
- chamferSymbolType() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the chamfer dimension symbol type
License requirements: None.
- chamferType() - Method in interface nxopen.features.ResizeChamferBuilder
-
Returns the chamfer type
License requirements: None.
- CHAN - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
Chan
- CHAN1 - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
Chan1
- CHAN2 - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
Chan2
- CHANGE_DEGREE - Static variable in class nxopen.features.StudioXformBuilder.AdvancedMethodType
-
Deprecated.
Change degree
- CHANGE_LAYER_TO_SELECTABLE - Static variable in class nxopen.DisplayManager.LayerSetting
-
Change the layer to selectable if it is invisible
- CHANGE_NOTICE - Static variable in class nxopen.assemblies.Subset.ContentType
-
Represents a change notice content subset
- CHANGE_NOTICE - Static variable in class nxopen.ContentDefinition.Type
-
Represents a change notice definition
- CHANGE_PART - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Chaneg part file operation
- CHANGE_STATION - Static variable in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
-
Changes the station number of scraps
- CHANGE_TYPE - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
-
The type of scrap will be changed between Piercing and Piloting
- CHANGE_WORK_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- changeAllBoundaryConstraints() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the flag indicating to apply to all constraints
License requirements: None.
- changeAllSizes() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the value of option, which specifies when enlarging surface, whether to change all the sizes at the same time or not.
- changeApproachRetract() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to change approach and retract distances to avoid collisions
License requirements: None.
- changeBooleanType() - Method in interface nxopen.features.Feature
-
Change Boolean Type
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- changeBoundaryFacesColor() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Change the color of the selected boundary using the specified color
License requirements: None.
- changeBoxSize() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the option to change the created boundbox size
License requirements: None.
- changeByName(String, Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
- changeColScrap() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the changing color of scrap
License requirements: None.
- changeComponentVisibility() - Method in interface nxopen.assemblies.ConstraintDisplayBuilder
-
Returns the flag indicating whether or not a Show Only operation should be done on the connecting
components.
- changeConfig(String, String[], String[]) - Method in interface nxopen.issue.IssueList
-
Changes the config of
IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- changeCurrentRegionName(String) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Change the region name for the current region
License requirements: None.
- CHANGED - Static variable in class nxopen.cam.CAMFeature.State
-
Feature is changed and out of date
- changeDegree(NXObject) - Method in interface nxopen.features.StudioXformBuilder
-
- changeDegree(NXObject) - Method in interface nxopen.features.StudioXformBuilderEx
-
- changeDegreeWithParameters(NXObject, int, int, int, int) - Method in interface nxopen.features.StudioXformBuilderEx
-
Changes degree of the selected xform object with desired parameters
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- changeDescription(AMEBaseNode, String) - Method in interface nxopen.ame.AMEManager
-
Change the description of the node
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- changedObjs - Variable in class nxopen.uf.UFClear.Summary
-
- changedPairs - Variable in class nxopen.uf.UFClear.Summary
-
- changeEdgeDensity(NXObject, int) - Method in interface nxopen.cae.MappedMeshBuilder
-
Returns the edge density
License requirements: None.
- changeEdgeDensityObject(NXObject[], int) - Method in interface nxopen.cae.MappedMeshBuilder
-
Returns selected edge densities as one object
License requirements: None.
- changeEditObject(NXObject) - Method in interface nxopen.ame.ObjectConnectionDetailBuilder
-
Change the edit object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- changeEngineeringObjectDescription(IEngObject, String) - Method in interface nxopen.ame.AMEManager
-
Change the description of an Engineering Object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- changeEntitiesColor(TaggedObject[], int) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Change the color of displayable entities
License requirements: None.
- changeFacesSideOption(boolean) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Changes the option for the side of faces
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- changeFeatureType(int) - Method in interface nxopen.weld.CharacteristicsBuilder
-
- changeFeatureType(CharacteristicsBuilder.Type) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Change the type of feature defining the attributes.
- changeFlexibility(NXObject) - Method in interface nxopen.features.StudioXformBuilder
-
- changeFlexibility(NXObject) - Method in interface nxopen.features.StudioXformBuilderEx
-
Changes flexibility of the selected xform object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- changeGuideLineDirectionAndLength(Curve, Vector3d, double) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Changes the direction and length of a guide line.
- changeGuideLineDirectionAndLength(Curve, Vector3d, double) - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Changes the direction and length of a guide line.
- changeHarness(HarnessDevice) - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Adds this stockdevice as child of given HarnessDevice.
- changeId(String, String) - Method in interface nxopen.mechatronics.TagTableBuilder
-
Changes ID.
- changeInterpartReferences(String, String) - Method in interface nxopen.ExpressionCollection
-
Changes all of the references in the part "owning_part" from expressions
in the part "old_part_name" to expressions in the part "new_part_name".
- changeInterpartReferences(String, String, boolean, boolean) - Method in interface nxopen.ExpressionCollection
-
Changes all of the references in the part "owning_part" from expressions
in the part "old_part_name" to expressions in the part "new_part_name".
- changeInterpartReferencesFor4gd(Component, String, Component, boolean, boolean) - Method in interface nxopen.ExpressionCollection
-
Interface for 4gd
License requirements: None.
- changeLayout(Layout) - Method in interface nxopen.LayoutCollection
-
Sets the given layout as current layout
License requirements: None.
- changeLayoutWithOptions(Layout, boolean, boolean) - Method in interface nxopen.LayoutCollection
-
Sets the given layout as current layout and optionally removes the old and/or new layout caches
License requirements: None.
- ChangeList - Interface in nxopen.options
-
Records changes to option values at the specified level.
- ChangeMaterial - Interface in nxopen.mechatronics
-
Represents the Change material constraint.
- ChangeMaterialBuilder - Interface in nxopen.mechatronics
-
- ChangeMaterialCollection - Interface in nxopen.mechatronics
-
Represents a collection of Change Material Constraint.
- changeMaterials() - Method in interface nxopen.mechatronics.PhysicsManager
-
- changeMethodName(String) - Method in interface nxopen.ame.PlcMethod
-
Change the name of a PlcMethod
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- changeName(AMEBaseNode, String) - Method in interface nxopen.ame.AMEManager
-
Change the name of the node
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- changeName(String) - Method in interface nxopen.HumanReachZone
-
Change reach zone name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- changeNodeState(NavigatorNode, int) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Change node state.
- changeOffsetBaseFace(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- CHANGEOVER - Static variable in class nxopen.tooling.QuickQuotationBuilder.DesignTypes
-
the design is a changeover
- ChangeoverManagementBuilder - Interface in nxopen.tooling
-
- ChangeoverManagementBuilder.Types - Class in nxopen.tooling
-
Specifies the types of changeover management.
- changeoverName() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Returns the name of the to-be-created changeover.
- ChangeOwnerBuilder - Interface in nxopen.mechatronics
-
- changeParent(NXObject, NXObject) - Method in interface nxopen.ame.AMEManager
-
Change the parent of a node in navigator
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- changePartingObjectType(int) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Change the type of parting objects to be placed or edited.
- changePerspective(boolean) - Method in interface nxopen.View
-
Changes a view from an orthographic view to a perspective view, or from a perspective
view to an orthographic view.
- changeProbeAngles() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to change probe angles to avoid collisions
License requirements: None.
- changeProbeTip() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to change probe tip to avoid collisions
License requirements: None.
- changeRadius() - Method in interface nxopen.die.QuickBinderWrapBuilder
-
Returns the change radius value
License requirements: None.
- changeReferencePatternTemplate(int, int) - Method in interface nxopen.assemblies.ComponentPattern
-
Changes the template component of a reference pattern to a pattern member at indices (firstBaseInstanceIndex, secondBaseInstanceIndex).
- changeRegionFacesColor(String, int, int) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Change the color of the faces of a region
License requirements: None.
- changeRegionLayer(String, int) - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Change the layer of the region
License requirements: None.
- changeSectionCurve() - Method in interface nxopen.features.EditCrossSectionBuilder
-
Change the section curves.
- changeSectionPlane(Curve, Direction) - Method in interface nxopen.die.AddendumSectionBuilder
-
Changes the section orientation.
- ChangeShellThickness - Interface in nxopen.features
-
- ChangeShellThicknessBuilder - Interface in nxopen.features
-
- changeStates(StateInfo[], boolean) - Method in interface nxopen.layer.LayerManager
-
Changes the states of the specified layers in the part.
- changeStates(StateInfo[]) - Method in interface nxopen.layer.LayerManager
-
Changes the states of the specified layers in the part.
- changeStatus - Variable in class nxopen.uf.UFModl.ParentDispInfo
-
- changeSymbolLineColorFontWidth() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the change symbol line color font width
License requirements: None.
- changeSymbolSize() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the change symbol size
License requirements: None.
- changeSymbolType() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the change symbol type
License requirements: None.
- changeTipOrientations() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the change tip orientations toggle option
License requirements: die_engineering ("DIE ENGINEERING")
.
- changeTipOrigin() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the change tip origin
License requirements: die_engineering ("DIE ENGINEERING")
.
- changeType(int) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- changeViewOrientation() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether the view orientation will be changed to align with the sketch when the sketch is activated.
- changeViewOrientation() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the indication if the view orientation should be changed automatically (true)
upon initial creation of rectangles, or not (false)
License requirements: None.
- changeWallThickness() - Method in interface nxopen.features.StepBuilder
-
Returns the change wall thickness
License requirements: None.
- CHANNEL - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- CHANNEL - Static variable in class nxopen.die.AddendumSectionBuilder.SectionShapeType
-
Section consists of all segments in a channel shape.
- CHANNEL - Static variable in class nxopen.tooling.CoolingDefineChannelBuilder.Types
-
- CHANNEL_TUNNEL_CAP - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Create channel tunnel cap surface.
- CHANNEL_TUNNEL_CAP - Static variable in class nxopen.die.AddSurfBuilder.Methods
-
To close an end cap.
- channelAdjust() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ChannelAdjustCollection instance belonging to this part .
- ChannelAdjustBuilder - Interface in nxopen.tooling
-
The builder class for Channel Adjust which assists you
to adjust the postion and the length of the channel.
- ChannelAdjustBuilder.AdjustType - Class in nxopen.tooling
-
the adjust method.
- ChannelAdjustBuilder.VectorMethod - Class in nxopen.tooling
-
the vector adjust method.
- ChannelAdjustCollection - Interface in nxopen.tooling
-
Creates a ChannelAdjust Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
- channelColor() - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
Returns the selected channel body color.
- channelColor() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
Returns the circuit channel body color.
- ChannelColorData() - Constructor for class nxopen.tooling.SpecifyBaffleBuilder.ChannelColorData
-
- channelDiameter() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Returns the channel diameter
License requirements: None.
- channelDiameter() - Method in interface nxopen.tooling.CoolingPatternBuilder
-
Returns the channel diameter
License requirements: None.
- channelFitting() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ChannelFittingCollection instance belonging to this part .
- ChannelFittingBuilder - Interface in nxopen.tooling
-
The builder class for Channel Fitting which assists you
to add cooling fitting.
- ChannelFittingCollection - Interface in nxopen.tooling
-
Creates a ChannelFitting Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
- channelGuide() - Method in interface nxopen.tooling.CoolingPatternBuilder
-
Returns the lines used to create the channel path.
- channelName() - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
Returns the channel's name
License requirements: None.
- channelName() - Method in interface nxopen.cam.MachineTurretGroupBuilder
-
Returns the channel's name
License requirements: None.
- channelName() - Method in interface nxopen.cam.OperationBuilder
-
Returns the channel's name
License requirements: None.
- channelName() - Method in interface nxopen.cam.ToolBuilder
-
Returns the channel's name
License requirements: None.
- channelname - Variable in class nxopen.sim.IsvControlPanelBuilder.DetailData
-
- channels() - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
Returns the channel or body to assign new attributes.
- channelType() - Method in interface nxopen.tooling.SpecifyBaffleBuilder
-
Returns the type to specify the Cooling fittings types: oil, air or water.
- CHAR - Static variable in class nxopen.ame.PlcDataType
-
- CHAR - Static variable in class nxopen.pdm.PdmSoaqueryNxmgrfielddatatype
-
Char type
- CHARACTER - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.VarTypes
-
Specifies a character variable
- characteristic() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
-
Returns the characteristic
License requirements: None.
- characteristicColor() - Method in interface nxopen.features.shipdesign.generalarrangement.FaceCharacteristicsBuilder
-
Returns the characteristic color to assign to the selected face.
- CharacteristicInformation() - Constructor for class nxopen.routing.CharacteristicList.CharacteristicInformation
-
- CharacteristicInformation(NXObject.AttributeType, String) - Constructor for class nxopen.routing.CharacteristicList.CharacteristicInformation
-
Constructor for the CharacteristicInformation object.
- CharacteristicList - Interface in nxopen.routing
-
Contains a list of characteristics.
- CharacteristicList.CharacteristicInformation - Class in nxopen.routing
-
Contains the type and name of a characteristic
- characteristicPreferences() - Method in interface nxopen.preferences.RoutingApplicationView
-
Preferences related to option/required characteristics.
- characteristics() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the characteristics.
- characteristics() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the characteristics
License requirements: ugweld ("UG WELD")
.
- characteristics() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the characteristics
License requirements: None.
- characteristics() - Method in interface nxopen.weld.SurfaceWeldBuilder
-
Returns the characteristics to assign to the object created.
- characteristics() - Method in interface nxopen.weld.TransformBuilder
-
Returns the collection of welding characteristics defined by attributes.
- characteristics() - Method in interface nxopen.weld.UserDefinedWeldBuilder
-
Returns the characteristics.
- characteristics() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the characteristics to assign to the object created.
- characteristics() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the characteristics information.
- characteristics() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the characteristics
License requirements: ugweld ("UG WELD")
.
- CharacteristicsBuilder - Interface in nxopen.weld
-
This builder allows you to define the attribute values to be set on the
output of the weld feature.
- CharacteristicsBuilder.Type - Class in nxopen.weld
-
The custom type of the datum specified for creation.
- CharacteristicsSelectionBuilder - Interface in nxopen.weld
-
This builder allows you to define the attribute values to be set on the
output of the weld feature.
- CharacteristicsValueBuilder - Interface in nxopen.weld
-
The object containing the information about the attribute to be
placed on the output of the weld feature.
- CharacteristicsValueBuilder.Type - Class in nxopen.weld
-
Settings to indicate the type of value contained in the attribute.
- characteristicType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the characteristic enum
License requirements: None.
- characteristicValue() - Method in interface nxopen.features.shipdesign.generalarrangement.FaceCharacteristicsBuilder
-
Returns the characteristic value to assign to the selected face.
- characterSize() - Method in interface nxopen.PlotBuilder
-
Returns the character size of the banner.
- characterSize() - Method in interface nxopen.preferences.PartVisualizationNamesBorders
-
Returns the character size.
- CharacterSpaceFactor - Class in nxopen.annotations
-
Specifies the standard font character space factor for each of the text types
- CharacterSpaceFactor() - Constructor for class nxopen.annotations.CharacterSpaceFactor
-
- CharacterSpaceFactor(double, double, double, double) - Constructor for class nxopen.annotations.CharacterSpaceFactor
-
Constructor for the CharacterSpaceFactor object.
- characterSpaceFactor - Variable in class nxopen.annotations.Lettering
-
Multiplier applied to font's standard character spacing
- characterSpaceFactor - Variable in class nxopen.uf.UFDrf.Lettering
-
- characterSpacing() - Method in interface nxopen.annotations.ChamferDimensionPreferences
-
Returns the space between the text characters or symbols as a factor of the character size
License requirements: None.
- charactersToSkip() - Method in interface nxopen.annotations.HoleTableSettingsLabelBuilder
-
Returns the characters to skip
License requirements: None.
- charactersToSkip - Variable in class nxopen.uf.UFPlist.Prefs
-
- CHARCOAL_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- CharDesc() - Constructor for class nxopen.uf.UFRoute.CharDesc
-
- CharDesc(String, int) - Constructor for class nxopen.uf.UFRoute.CharDesc
-
- charSize - Variable in class nxopen.uf.UFSket.AskLegacyPreferencesData
-
- charSize - Variable in class nxopen.uf.UFSket.AskPreferencesData
-
- charSpaceFactor - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- charSpacing - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- charToSkip() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the characters to skip specifies the characters to be skipped for callouts
License requirements: None.
- charx - Variable in class nxopen.uf.UFRoute.AskAppViewOptCharxData
-
- charx - Variable in class nxopen.uf.UFRoute.AskAppViewReqCharxData
-
- chasePasses() - Method in interface nxopen.cam.ThreadCutParameters
-
Returns the chase passes
License requirements: None.
- chassisCsys() - Method in interface nxopen.motion.TireBuilder
-
Returns the chassis coordinate system.
- chassisLink() - Method in interface nxopen.motion.TireBuilder
-
Returns the chassis link.
- chassisPoint() - Method in interface nxopen.motion.TireBuilder
-
Returns the chassis point.
- CHECK - Static variable in class nxopen.blockstyler.Wizard.SubNodeAction
-
Sub-node has been checked if a checkbox was specified.
- CHECK - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.SelfIntersectionCheckingOption
-
Check once
- CHECK - Static variable in class nxopen.cam.Preferences.GeometryTypes
-
check
- CHECK - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods
-
Use selected check geometry
- check() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
Performs deviation checking.
- CHECK - Static variable in class nxopen.uf.UFCam.GeomType
-
- check(Tag) - Method in interface nxopen.uf.UFParam
-
- CHECK_AND_STOP_AT_FIRST_ERROR - Static variable in class nxopen.cae.SimSolution.SetupCheckOption
-
perform set up checks but stop at first error
- CHECK_CLEARANCES - Static variable in class nxopen.tooling.ClearanceManagementBuilder.Type
-
- CHECK_COMPONENT_CONNECTIVITY - Static variable in class nxopen.cae.qualityaudit.Action.Id
-
the action analyzing component connectivity.
- CHECK_COMPONENT_SYNTHESIS - Static variable in class nxopen.cae.qualityaudit.Action.Id
-
the action listing components and their direct connections.
- CHECK_DIAMETER_RANGE - Static variable in class nxopen.cae.qualityaudit.Action.Id
-
the action checking diameter bounds.
- CHECK_DISTANCE_BETWEEN_CONNECTION_POINTS - Static variable in class nxopen.cae.qualityaudit.Action.Id
-
the action verifying distance between the points of the same connection.
- CHECK_DISTANCE_BETWEEN_CONNECTIONS - Static variable in class nxopen.cae.qualityaudit.Action.Id
-
the action checking the distance between connections.
- CHECK_FREE_EDGE_DISTANCE - Static variable in class nxopen.cae.qualityaudit.Action.Id
-
the action checking for near edge connections.
- CHECK_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- CHECK_GEOM_TYPE - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- CHECK_MATE_RESULT_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Check-Mate result
- CHECK_TARGET_SEQUENCE - Static variable in class nxopen.cae.qualityaudit.Action.Id
-
the action verifying the support order.
- checkAllComponents() - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
Returns the value indicating whether to check all components associated with the assembly FEM in the
model check, regardless of load status.
- checkAnalysisQuality() - Method in interface nxopen.cae.SimSolution
-
Check analysis quality on active structural solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- checkAndMovePlanes(Feature, Feature, ISurface, ISurface) - Method in interface nxopen.die.TrimTaskBuilder
-
Move end planes if the position of Trim Task is changed.
- CheckAndMovePlanesData() - Constructor for class nxopen.die.TrimTaskBuilder.CheckAndMovePlanesData
-
- checkArrayStatus(Tag) - Method in interface nxopen.uf.UFAssem
-
- checkAssemblyConnections() - Method in interface nxopen.cae.connections.Composer
-
CheckAssemblyConnections
License requirements: nx_masterfem ("Finite Element Modeling")
.
- checkAssemblyDocumentConnections() - Method in interface nxopen.cae.connections.Composer
-
CheckAssemblyDocumentConnections
License requirements: nx_masterfem ("Finite Element Modeling")
.
- checkAttributeStatus(Tag) - Method in interface nxopen.uf.UFFam
-
- checkBodyClash(DisplayableObject, DisplayableObject) - Method in interface nxopen.shipdesign.Generator
-
Check the clash between two bodys.
- checkBoundary() - Method in interface nxopen.cam.FaceMillingBuilder
-
Returns the check boundary
License requirements: None.
- checkBoundary() - Method in interface nxopen.cam.MillBoundaryGeomBuilder
-
Returns the check boundary
License requirements: None.
- checkBoundary() - Method in interface nxopen.cam.PlanarMillingBuilder
-
Returns the check boundary
License requirements: None.
- checkBoundaryCondition() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns a value indicating whether to accept nodes of boundary condition as constraint
License requirements: None.
- checkButton() - Method in interface nxopen.mechatronics.ChangeOwnerBuilder
-
Check the action is valid or not, and give the report in an information window.
- checkCircularReference() - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
Returns the option determines whether or not to search circular reference for basic model.
- checkClearance() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the check clearance
License requirements: None.
- checkClearance() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
Returns whether to check the clearance
License requirements: None.
- checkCollision() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Returns the check collision
License requirements: None.
- checkColor() - Method in interface nxopen.cam.Preferences
-
Returns the check color
License requirements: None.
- checkCosimLicense(boolean) - Method in interface nxopen.motion.MotionEnvironment
-
Checks the co-simulation license
License requirements: mechanisms ("MECHANISMS")
.
- checkCriteriaAngle() - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Returns the Check Criteria Angle
License requirements: None.
- checkCriteriaDistance() - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Returns the Check Criteria Distance
License requirements: None.
- checkDesignRules(DesignRuleViolationCollection.Mode, DesignRuleViolationCollection.Reason, NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Executes the Routing Design Rules against the work part
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- checkDof() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns a value indicating whether to restrict the dispacement in the coordinate direction of the referenced coordinate system
License requirements: None.
- CHECKED - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.CheckBoxStatus
-
Checked
- CHECKED_GDT - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ToleranceSource
-
Checked Gdt
- checkedBody() - Method in interface nxopen.tooling.UnfoldingSimulationBuilder
-
Returns the body that will do static interference check with selected bend face body
License requirements: None.
- checkedElements() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns the elements checked for penetration
License requirements: None.
- checkedObjectsList() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
Returns the selected objects for checking.
- checkedoutobjects - Variable in class nxopen.assemblies.ComponentAssembly.CheckedoutStatusOfObjectsData
-
Array of NXObjects which are open in session and checked out
- checkedoutobjects - Variable in class nxopen.assemblies.ComponentAssembly.CheckoutAllModifiedObjectsData
-
Array of NXObjects checked out
- CheckedoutStatusOfObjectsData() - Constructor for class nxopen.assemblies.ComponentAssembly.CheckedoutStatusOfObjectsData
-
- checkedPairs - Variable in class nxopen.uf.UFClear.Summary
-
- checkElementGroup() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns a value indicating whether to check elements for penetration
License requirements: None.
- checkElementSizeOption() - Method in interface nxopen.cae.Mesh3dTetBuilder
-
Returns the check element size option.
- CHECKER_PLATE - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.DeckingMaterialTypeAPI
-
- CheckerNode - Interface in nxopen.validate
-
Represents a checker that validator will use to check against part node.
- CheckerNode.ChildCheckerEnabledFlagsData - Class in nxopen.validate
-
- checkFamilyStatus(Tag) - Method in interface nxopen.uf.UFFam
-
- checkFlexbodyLicense(boolean) - Method in interface nxopen.motion.MotionEnvironment
-
Checks the flexible body dynamic license
License requirements: mechanisms ("MECHANISMS")
.
- checkFluteLength() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the check flute length flag
License requirements: None.
- checkForDuplicates() - Method in interface nxopen.routing.TransformPathBuilder
-
Returns the flag that indicates whether or not to check for duplicate segments after the copy or transform.
- checkForInvalidParentModelView() - Method in interface nxopen.drawings.DraftingView
-
Checks the view's validity by looking at the parent model view
License requirements: drafting ("DRAFTING")
.
- checkForSymmetry() - Method in interface nxopen.cae.DependentMeshBuilder
-
Check for symmetry
License requirements: nx_masterfem ("Finite Element Modeling")
.
- checkForTinyEdges() - Method in interface nxopen.cae.DependentMeshBuilder
-
Check tiny edges
License requirements: nx_masterfem ("Finite Element Modeling")
.
- checkFreeEdges() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
Returns the value indicating whether to check free edges or not
License requirements: None.
- checkGap(NXObject[]) - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Calculate the gap between last selected objects and existing loop string, and find out the nearest end point.
- CheckGapData() - Constructor for class nxopen.tooling.TraverseLoopBuilder.CheckGapData
-
- checkGeomColor - Variable in class nxopen.uf.UFCam.Preferences
-
- checkGeometry() - Method in interface nxopen.cam.MillGeomBuilder
-
Returns the check geometry builder
License requirements: None.
- checkGeometry() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the check geometry builder
License requirements: None.
- checkGeometry() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the check geometry builder
License requirements: None.
- checkGeometryToggle() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Returns the check geometry toggle for the final sewn sheet
License requirements: None.
- checkGeomType - Variable in class nxopen.uf.UFCam.Preferences
-
- checkHuman(Human, boolean, boolean, boolean, boolean) - Method in interface nxopen.features.Human
-
Check whether human is correct compared with user defined base human
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- checkin - Variable in class nxopen.uf.UFClone.CheckinData
-
- checkinComponents(Component[], ComponentAssembly.CheckinCheckoutOption) - Method in interface nxopen.assemblies.ComponentAssembly
-
- CheckinData() - Constructor for class nxopen.uf.UFClone.CheckinData
-
- CheckinData(boolean, boolean) - Constructor for class nxopen.uf.UFClone.CheckinData
-
- checkingElementGroup() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
-
Returns the elements to react on the restrictions
License requirements: None.
- checkingG2Continuity() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Returns the indicator that a cam profile should check G2 continuous or not
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- checkingGroup() - Method in interface nxopen.cae.optimization.TBSCastCondition
-
Returns the element group that is used for checking collision of the removed elements
License requirements: None.
- checkingType() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
-
Returns the checking type
License requirements: None.
- CheckinInput() - Constructor for class nxopen.pdm.PdmPart.CheckinInput
-
- CheckinInput(boolean, boolean, boolean) - Constructor for class nxopen.pdm.PdmPart.CheckinInput
-
Constructor for the CheckinInput object.
- checkinParts(BasePart[], PdmPart.CheckinInput) - Method in interface nxopen.pdm.PdmPart
-
Given an array of parts, check in the parts.
- checkInPositioningGroups(PositioningGroup[]) - Method in interface nxopen.assemblies.PositioningTask
-
Checks in the specified
PositioningGroup
s which must be
associated with this positioning task.
- checkInterference() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Checks the clearance between the standard parts and the other components in current assembly.
- checkInterference(Tag, int, Tag[]) - Method in interface nxopen.uf.UFModeling
-
- checkinWorkset() - Method in interface nxopen.assemblies.ComponentAssembly
-
Checks in workset.
- checkIpwCollisions() - Method in interface nxopen.cam.CutParameters
-
Returns the value to Check for Ipw Collsions
License requirements: None.
- checkKnuckleStiffener() - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
Returns the option that determines whether or not to search unsplit knuckled stiffeners which are not allowed to be bent.
- checkLabelConflicts() - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
Returns the value indicating whether to check labeling conflicts for node, element and coordindate system across component FEMS
and reports the label range in which the conflict occurs
License requirements: None.
- checkLimitViolation() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the check limit violation
License requirements: None.
- checkLinkCondition() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns a value indicating whether to check link condition
License requirements: None.
- checkMaximumGrowValue() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns a value indicating whether to check maximum grow value
License requirements: None.
- checkMaximumShrinkValue() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns a value indicating whether to check maximum shrink value
License requirements: None.
- checkMemberStatus(Tag, int) - Method in interface nxopen.uf.UFFam
-
- checkModelComprehensive(boolean, String) - Method in interface nxopen.uf.UFSf
-
- checkModelConsistency(String) - Method in interface nxopen.cae.ModelCheckManager
-
Checks model consistency for all
CAEBody
in a
FemPart
, to find
out the CAE bodies which is inconsistent to the master bodies, output the body list to log file or listing window
if there is no log file name specified.
- CheckModelConsistencyData() - Constructor for class nxopen.cae.ModelCheckManager.CheckModelConsistencyData
-
- checkModelDuplicateNodes(int, Tag, boolean, double) - Method in interface nxopen.uf.UFSf
-
- checkMotorLicense(boolean) - Method in interface nxopen.motion.MotionEnvironment
-
Checks the motor license
License requirements: mechanisms ("MECHANISMS")
.
- checkName(String) - Method in interface nxopen.ExpressionGroupCollection
-
Returns whether or not expression group name is valid.
- checkName() - Method in interface nxopen.validate.RequirementCheck
-
Returns the name of requirement check shown in Requirements Validation dialog
License requirements: None.
- checkNeck() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the indicator to include tool neck in the collision check process
License requirements: None.
- checkNewerRevisionsOfTemplatePart() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the check for newer revisions of template part option
License requirements: None.
- checkNodesForContinuity(FENode[], FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder
-
Checks continuity of nodes for uniform distribution along selected edges
License requirements: nx_masterfem ("Finite Element Modeling")
.
- checkNodeToEdgeMapForPlanarAnalysis(TaggedObject[], FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder
-
Checks out of plane displacement of nodes for Node to Edge Mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
- checkNodeToFaceMapForPlanarAnalysis(TaggedObject, FENode[]) - Method in interface nxopen.cae.ManualMorphBuilder
-
Checks out of plane displacement of nodes for Node to Face Mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
- checkNodeToPointMapForPlanarAnalysis(TaggedObject, TaggedObject) - Method in interface nxopen.cae.ManualMorphBuilder
-
Checks out of plane displacement of nodes for Node to Point Mapping
License requirements: nx_masterfem ("Finite Element Modeling")
.
- checkNonManifoldEdges() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
Returns the value indicating whether to check non-manifold edges or not
License requirements: None.
- checkObsoleteStatus() - Method in interface nxopen.cae.responsesimulation.Solution
-
Checks status and updates solution properties for the solution which became obsolete because
referenced modal shape file was changed.
- checkOffsetBuilder() - Method in interface nxopen.cam.FeatureGeomBuilder
-
Returns the check offset (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- checkout() - Method in interface nxopen.pdm.PdmPart
-
Checkout the part
License requirements: None.
- checkout - Variable in class nxopen.uf.UFClone.CheckoutData
-
- checkoutAllModifiedObjects() - Method in interface nxopen.assemblies.ComponentAssembly
-
Checks out all modified objects in the current session. checkedOutObjects collection will be type of
BasePart
or
DesignElementRevision
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX8.5.0
- CheckoutAllModifiedObjectsData() - Constructor for class nxopen.assemblies.ComponentAssembly.CheckoutAllModifiedObjectsData
-
- checkoutComponents(Component[], ComponentAssembly.CheckinCheckoutOption) - Method in interface nxopen.assemblies.ComponentAssembly
-
- CheckoutData() - Constructor for class nxopen.uf.UFClone.CheckoutData
-
- CheckoutData(boolean, String) - Constructor for class nxopen.uf.UFClone.CheckoutData
-
- CheckoutInput() - Constructor for class nxopen.pdm.PdmPart.CheckoutInput
-
- CheckoutInput(String, String, boolean, boolean, boolean) - Constructor for class nxopen.pdm.PdmPart.CheckoutInput
-
Constructor for the CheckoutInput object.
- checkoutParts(BasePart[], PdmPart.CheckoutInput) - Method in interface nxopen.pdm.PdmPart
-
Given an array of parts, check out the parts.
- checkOutPositioningGroups(PositioningGroup[]) - Method in interface nxopen.assemblies.PositioningTask
-
Checks out the specified
PositioningGroup
s which must be
associated with this positioning task.
- checkoutWorkset() - Method in interface nxopen.assemblies.ComponentAssembly
-
Checks out workset.
- checkOverlappingToggle() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Returns the check overlapping toggle for the final sewn sheet
License requirements: None.
- checkPartGeometryBeyondTrim() - Method in interface nxopen.cam.TrimPoint
-
Returns the trim point check part geometry beyond trim
License requirements: None.
- checkPartWritable(String) - Method in interface nxopen.uf.UFPart
-
- checkPlateIntersectedPlate() - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
Returns the option determines whether or not to search plate intersected plate in case there is no intersection seam with split on.
- checkPlateIntersectedStiffener() - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
Returns the option determines whether or not to search stiffener intersected plate in case there is no profile cutout.
- checkPointSpacing() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the maximum distance between two check points
License requirements: None.
- checkProductInterfaceObject() - Method in interface nxopen.assemblies.productinterface.InterfaceObject
-
Check the invalid state of product interface object
License requirements: None.
- checkSafeClearance() - Method in interface nxopen.cam.CutParameters
-
Returns the Check Safe Clearance
License requirements: None.
- checkScallopSize() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Checks the scallop size by enabling the predefined requirement check inside the standard part,
and resets to original state afterwards.
- checkScenarioDataSourceCompatible(PostScenarioParameters) - Method in interface nxopen.cae.PostScenarioManager
-
- CheckScope - Class in nxopen.cae.modelcheck
-
the option indicates the check scope for a model check command
- checkScopeOption() - Method in interface nxopen.cae.modelcheck.ISelectionBuilder
-
Returns the check scope setting
License requirements: None.
- checkSelection() - Method in interface nxopen.cam.Preferences
-
- checkSelectionParameters(PostScenarioSelectionParameters) - Method in interface nxopen.cae.PostScenarioBuilder
-
- checkSpreadsheetInput(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Looks for the parameter values that are owned by reference geometeries(Attributes) and/or
template parts(attributes or expressions) and used as inputs to look for the parameter values
in spreadsheet.
- CheckSpreadsheetInputData() - Constructor for class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CheckSpreadsheetInputData
-
- checkStatus() - Method in interface nxopen.shipdesign.NavigatorNode
-
Returns the node check status.
- checkStatus() - Method in interface nxopen.tooling.PocketBuilder
-
Checks the pocket status of standard parts
License requirements: None.
- checkStatus() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
Check whether cooling circuit is finished or not.
- checkStiffenerIntersectedStiffener() - Method in interface nxopen.features.shipdesign.ValidateModelBuilder
-
Returns the option determines whether or not to search stiffener intersected stiffener in case there is interference of two stiffener bodies.
- checkStock() - Method in interface nxopen.cam.GeometrySet
-
Returns the check stock
License requirements: None.
- checkStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the check stock
License requirements: None.
- checkSuppressParting() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Check if suppressing parting is needed.
- checkSurfaces() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Returns the option for checking the resulting guided extension surfaces for geometry issues
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- checkSurfaces() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Returns the option for checking the resulting guided extension surfaces for geometry issues
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING")
.
- checkToolAboveBall() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns a bool to check tool above ball
License requirements: None.
- checkToolAndHolder() - Method in interface nxopen.cam.GougeCheckBuilder
-
Returns the check tool and holder.
- checkToolHolder() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the check for tool holder collision
License requirements: None.
- checkToolLength() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the check tool length flag
License requirements: None.
- checkType() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the check type
License requirements: None.
- checkUnconnectedComponent() - Method in interface nxopen.cae.modelcheck.ModelSetupCheckBuilder
-
Returns the option specifying whether to check for component FEMs that are not connected
License requirements: None.
- checkValidDataSource(PostScenarioParameters) - Method in interface nxopen.cae.PostScenarioManager
-
- CHEVRON_IN - Static variable in class nxopen.pid.OffSheetConnectorBuilder.StyleOption
-
- CHEVRON_IN - Static variable in class nxopen.pid.PreferencesOffSheetConnectorBuilder.StyleOption
-
- CHEVRON_OUT - Static variable in class nxopen.pid.OffSheetConnectorBuilder.StyleOption
-
- CHEVRON_OUT - Static variable in class nxopen.pid.PreferencesOffSheetConnectorBuilder.StyleOption
-
- childChanged - Variable in class nxopen.uf.UFAssem.InstanceStatus
-
- ChildCheckerEnabledFlagsData() - Constructor for class nxopen.validate.CheckerNode.ChildCheckerEnabledFlagsData
-
- childcheckerinstances - Variable in class nxopen.validate.CheckerNode.ChildCheckerEnabledFlagsData
-
The instance names of child checkers in the profile checker
- childComponentsForComponents() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
Returns the flag indicating whether to export child components for components
License requirements: None.
- childComponentsForDefinitions() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
Returns the flag indicating whether to export child components for definitions
License requirements: None.
- childCsys() - Method in interface nxopen.motion.SubmechanismPositionerBuilder
-
Returns the child coordinate system.
- childHic1000Angle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the angle to translate the child HIC (Head Injury Criterion) 1000 impact sheet and grid
License requirements: None.
- childHic1000Offset() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
- childHic1000OutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the color that will be used for the child HIC (Head Injury Criterion) 1000 impact sheet
License requirements: None.
- childHic1000OutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the font that will be used for the child HIC (Head Injury Criterion) 1000 impact sheet
License requirements: None.
- childHic1000OutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the layer that will be used for the child HIC (Head Injury Criterion) 1000 impact sheet
License requirements: None.
- childHic1000OutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the line width that will be used for the child HIC (Head Injury Criterion) 1000 impact sheet
License requirements: None.
- childHic1700Angle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the angle to translate the child HIC (Head Injury Criterion) 1700 impact sheet and grid
License requirements: None.
- childHic1700Offset() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
- childHic1700OutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the color that will be used for the child HIC (Head Injury Criterion) 1700 impact sheet
License requirements: None.
- childHic1700OutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the font that will be used for the child HIC (Head Injury Criterion) 1700 impact sheet
License requirements: None.
- childHic1700OutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the layer that will be used for the child HIC (Head Injury Criterion) 1700 impact sheet
License requirements: None.
- childHic1700OutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the line width that will be used for the child HIC (Head Injury Criterion) 1700 impact sheet
License requirements: None.
- childidentifiers - Variable in class nxopen.routing.ReuseLibrary.PartLibraryGetChildNodesData
-
The child node identifiers.
- childPartOccs - Variable in class nxopen.uf.UFAssem.AskAllPartOccChildrenData
-
- childPartOccs - Variable in class nxopen.uf.UFAssem.AskPartOccChildrenData
-
- children - Variable in class nxopen.uf.UFProcessAid.AskChildrenFeaturesData
-
- children - Variable in class nxopen.uf.UFSmd.AskFpChildrenData
-
- children - Variable in class nxopen.uf.UFSo.AskChildrenData
-
- childrenArray - Variable in class nxopen.uf.UFModeling.AskFeatRelativesData
-
- ChildrenEvaluatorBuilder - Interface in nxopen.ame
-
- ChildrenEvaluatorBuilder.FilterType - Class in nxopen.ame
-
choices for object type filter, can either be local modules, program blocks, plc data types, or tags
- childrenGeomAssociation() - Method in interface nxopen.cae.ManualNodeAssociationBuilder
-
Returns the flag which decides whether node association to child geometry should be done automatically or not
License requirements: None.
- childrenRows - Variable in class nxopen.uf.UFPlist.AskAttachedRowsData
-
- CHINA_GB150842006 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.DriverSideStandardsType
-
- CHINA_GB150842006 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InsideStandardsType
-
- CHINA_M1N1ONLY_GB150842006 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
-
Represents China (M1/N1 only) : GB 15084 - 2006 standard
- CHINA_NOT_M1N1GB150842006 - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.PassengerSideStandardsType
-
Represents China (Not M1/N1) : GB 15084 - 2006 standard
- CHINESE - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.StandardType
-
Chinese standard
- CHINESE_BIG5 - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the "traditional" Chinese character set
- ChipControl - Interface in nxopen.cam
-
- chipControl() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the chip control
License requirements: None.
- ChipControl.Types - Class in nxopen.cam
-
the control mode options .
- CHIPPING - Static variable in class nxopen.annotations.FinishMethod
-
Specifies chipping finish
- CHIPPING - Static variable in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
-
- chipRemovalIncrementType() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the chip removal increment type
License requirements: None.
- chkEntirePartStds() - Method in interface nxopen.uf.UFSmd
-
- chkFeatureStds(Tag[], int) - Method in interface nxopen.uf.UFSmd
-
- ChkStdResults() - Constructor for class nxopen.uf.UFSmd.ChkStdResults
-
- ChkStdResults(int, String[]) - Constructor for class nxopen.uf.UFSmd.ChkStdResults
-
- chkStds - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- CHOCKING_GAP - Static variable in class nxopen.cae.Result.Quantity
-
- CHOCKING_GAP_AT_ELEMENT_INTEGRATION_POINT - Static variable in class nxopen.cae.Result.Quantity
-
- choice() - Method in interface nxopen.cae.SuppressHoleBuilder
-
Returns the type Automatic or Manual
License requirements: None.
- choice() - Method in interface nxopen.geometricutilities.BlendStopshortBuilder
-
Returns the Stopshort option choice.
- CHOICE - Static variable in class nxopen.issue.IssueProperty.Type
-
Choice type
- CHOOSE_PART - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Choose Part command.
- ChooseExpression - Interface in nxopen.blockstyler
-
Represents Choose Expression block .
- chooseOptimalMethod() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the choose optimal method
License requirements: die_engineering ("DIE ENGINEERING")
.
- choosePartPlugin(ChoosePartPluginData) - Method in interface nxopen.routing.CustomManager.ChoosePartPlugin
-
This defines the prototype for the choose part plugin used by the Place Part command.
- ChoosePartPluginData - Interface in nxopen.routing
-
Data object created by Routing for use by the Choose Part plugin called by the Place Part command.
- CHORD_LENGTH - Static variable in class nxopen.features.AestheticFaceBlendBuilder.BlendType
-
Chord Length will keep the appearance of a constant width blend through areas which have changing angles between the input walls.
- CHORD_RECTANGULAR - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Chord Rectangular hole
- CHORD_RECTANGULAR - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
- CHORDAL - Static variable in class nxopen.features.AOCSBuilder.OffsetType
-
offset_type_chordal
- chordal() - Method in interface nxopen.ListCreator
-
Returns the m_chordal * - Specifies the chordal tolerance for Defined Level of Detail
License requirements: None.
- CHORDAL_DEVIATION - Static variable in class nxopen.facet.DecimateFacetBodyBuilder.DecimateMethodType
-
Chordal deviation reduces the number of facets by removing facets which do not effect the overall accuracy of the mesh.
- CHORDAL_TOLERANCE - Static variable in class nxopen.features.PointSetBuilder.CurvePointsType
-
Points will be created based on the chordal deviation of curve.
- CHORDAL_TOLERANCE - Static variable in class nxopen.fields.FieldProfileTable.SamplingPointOption
-
Chordal tolerance type
- CHORDAL_TOLERANCE - Static variable in class nxopen.routing.SegmentManager.SubdivideSpacing
-
Chordal Tolerance
- CHORDAL_TOLERANCE_SPACING - Static variable in class nxopen.features.SectionCurveBuilder.SpacingType
-
Chordal tolerance spacing
- chordalOption() - Method in interface nxopen.JtCreator
-
Returns the chordal option - Specifies wheather the chordal value should be RELATIVE or ABSOLUTE
License requirements: None.
- chordalTol() - Method in interface nxopen.STLCreator
-
Returns the chordal tol - the distance between a chord of the tessellation and the true surface
License requirements: None.
- chordalTolerance() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the value stored in chordal tolerance field.
- chordalTolerance() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the chordal tolerance
License requirements: None.
- chordalTolerance() - Method in interface nxopen.features.PointSetBuilder
-
Returns the chordal tolerance used in creating points.
- chordalTolerance() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the chordal tolerance
License requirements: None.
- chordalTolerance() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the chordal tolerance
License requirements: None.
- chordalTolerance() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the chordal tolerance
License requirements: None.
- chordalTolerance() - Method in interface nxopen.fields.FieldProfileTable
-
Returns the chordal tolerance
License requirements: None.
- chordalTolerance - Variable in class nxopen.routing.SegmentManager.SubdivideOption
-
Chordal Tolerance
- chordalTolerance() - Method in interface nxopen.weld.ExportWeldJointBuilder
-
Returns the minimum chordal length used to create a discrete version of the weld path, points along it will be output into
xml file to represent the weld path
License requirements: None.
- chordHeight() - Method in interface nxopen.facet.MergeFacetBodyBuilder
-
Returns the chord height to control the size of new facets
License requirements: None.
- chordLength() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
- chordLengthLaw() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the chord length law variable
License requirements: None.
- chordTol - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
-
- chordTol - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- CHROME - Static variable in class nxopen.display.TrueStudioBuilder.GlobalMaterial
-
Overrides the object color with a chrome material display.
- CHRONOLOGICAL_COMPONENT - Static variable in class nxopen.assemblies.Order.Type
-
System defined chronological component order
- chuckType() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the electrode chuck type.
- CIR_PERP_PARALLEL_TO_TAXIS - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes
-
cir perp parallel to taxis
- CIR_PERP_TO_TAXIS - Static variable in class nxopen.cam.ArcOutputTypeCiBuilder.OutputTypes
-
cir perp to taxis
- CIR_PERP_TO_TAXIS - Static variable in class nxopen.cam.WedmArcOutputTypeCiBuilder.OutputTypes
-
circular perpendicular to tool axis
- cirCavityNumber() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the copy number for circular transform
License requirements: None.
- circDeleteAllComponents() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the option to delete all components in circular array.
- CIRCLE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Circle
- CIRCLE - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- CIRCLE - Static variable in class nxopen.cae.MarkerType0d
-
- CIRCLE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Circle marker
- CIRCLE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Circle marker
- CIRCLE - Static variable in class nxopen.cae.PrimitiveRecipeMeshBuilder.Type
-
Circle Primitive
- CIRCLE - Static variable in class nxopen.cae.xyplot.PointMarker
-
Circle marker
- CIRCLE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Circle
- CIRCLE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.FeatureType
-
Circle alignment feature type
- CIRCLE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Circle Feature
- CIRCLE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Circle
- CIRCLE - Static variable in class nxopen.diagramming.DiagrammingAnnotationboundarytype
-
Circle Type
- CIRCLE - Static variable in class nxopen.display.SelPref.MouseGesture
-
multi-select using circle
- CIRCLE - Static variable in class nxopen.drawings.DetailViewBuilder.LabelOnParentType
-
Circular
- CIRCLE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType
-
Deprecated.
- CIRCLE - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SymbolType
-
- CIRCLE - Static variable in class nxopen.drawings.ViewDetailLabelBuilder.LabelParentDisplayTypes
-
- CIRCLE - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
circle
- CIRCLE - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder.Types
-
Deprecated.
- CIRCLE - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx.Types
-
- CIRCLE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- CIRCLE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- CIRCLE - Static variable in class nxopen.linedesigner.ColumnFeatureBuilder.ColumnBaseType
-
- CIRCLE - Static variable in class nxopen.linedesigner.ColumnFeatureBuilder.ColumnType
-
- CIRCLE - Static variable in class nxopen.linedesigner.ColumnGridEquipmentBuilder.ColumnBaseType
-
- CIRCLE - Static variable in class nxopen.linedesigner.ColumnGridEquipmentBuilder.ColumnType
-
- CIRCLE - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.RailCrossStyle
-
- CIRCLE - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.SelPostcrossStyle
-
- Circle - Interface in nxopen.markup
-
- CIRCLE - Static variable in class nxopen.mechatronics.TransportSurfaceBuilder.MoveType
-
Circle
- CIRCLE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Circle
- CIRCLE - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.CagePolylineVertexStyles
-
- CIRCLE - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
-
- CIRCLE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.BottomPlateSlugItems
-
Bottom plate slug type is circle
- CIRCLE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType
-
- CIRCLE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType
-
- CIRCLE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems
-
Die shoe slug type is circle
- CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Bottom plate slug type is circle
- CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Die shoe slug type is circle
- CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsBP
-
Punch pocket type in backing plate is circle
- CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsPP
-
Punch pocket type in punch plate is circle
- CIRCLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsSP
-
Punch pocket type in stripper plate is circle
- CIRCLE - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsBackingPlate
-
Punch pocket type in backing plate is circle
- CIRCLE - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsPunchPlate
-
Punch pocket type in punch plate is circle
- CIRCLE - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsStripperPlate
-
Punch pocket type in stripper plate is circle
- CIRCLE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType
-
Bottom backing plate slug type is circle
- CIRCLE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalDieShoeSlugType
-
Die shoe slug type is circle
- CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- Circle.CenterAndRadiusData - Class in nxopen.markup
-
- CIRCLE_IN_CIRCLE - Static variable in class nxopen.cae.MarkerType0d
-
- CIRCLE_IN_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CIRCLE_IN_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CIRCLE_IN_SQUARE - Static variable in class nxopen.cae.MarkerType0d
-
- CIRCLE_IN_SQUARE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CIRCLE_IN_SQUARE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CIRCLE_SECTION - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfaceSectionType
-
The checking surface is created as circle section type
- CIRCLE_SEGMENT - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.ShapeType
-
- CIRCLE_TANGENT - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
circle tangent
- circleCenter() - Method in interface nxopen.tooling.WireHoleBuilder
-
Returns the circle center to create wire hole
License requirements: None.
- CircleCenterline - Interface in nxopen.annotations
-
Represents a CircleCenterline centerline
This is an abstract class.
- CircleCenterlineBuilder - Interface in nxopen.annotations
-
Represents a CircleCenterline Builder
This is an abstract class.
- CircleCenterlineBuilder.Types - Class in nxopen.annotations
-
the valid enumeration used for the creation types, applicable only while creation
Once created type centerpoint will be set for all bolt circle/circular centerline
- CircleCenterlineSettingsBuilder - Interface in nxopen.annotations
-
Represents a Builder for Circle Centerline Settings .
- CIRCLESIN_SKETCH - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
- circleU() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the circle utoggle
License requirements: None.
- circleUType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the circle uenum
License requirements: None.
- circleUvalue() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
- circleUValue() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the circle uvalue
License requirements: None.
- circleUValueType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the circle uvalue enum
License requirements: None.
- circuitColor() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
Returns the circuit channel temperary body color.
- CIRCULAR - Static variable in class nxopen.annotations.DatumTargetBuilder.Types
-
circular
- CIRCULAR - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.AreaSymbolType
-
Circular
- CIRCULAR - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies cirular characteristics
- CIRCULAR - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
circular type
- CIRCULAR - Static variable in class nxopen.cam.CamPathContactMotionShapeType
-
- CIRCULAR - Static variable in class nxopen.cam.CamPathMotionShapeType
-
- CIRCULAR - Static variable in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes
-
Circular
- CIRCULAR - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
-
Circular
- CIRCULAR - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
-
Circular
- CIRCULAR - Static variable in class nxopen.cam.NcmWedmBuilder.LeadInMethodTypes
-
circular lead in
- CIRCULAR - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutMethodTypes
-
circular lead out
- CIRCULAR - Static variable in class nxopen.cam.TurningOperationBuilder.MotionOutputOptions
-
Linear and circular motions output
- CIRCULAR - Static variable in class nxopen.die.KeywayBuilder.Types
-
tool runoff is created using a plunge cut at the end of the slot
- CIRCULAR - Static variable in class nxopen.die.KeywayChildBuilder.RunoffTypeOption
-
Circular runoff.
- CIRCULAR - Static variable in class nxopen.die.KeywayParentBuilder.RunoffTypeOption
-
Circular runoff.
- CIRCULAR - Static variable in class nxopen.die.PadChildBuilder.ShapeTypeOption
-
Circular pad.
- CIRCULAR - Static variable in class nxopen.die.PadParentBuilder.ShapeTypeOption
-
Circular pad.
- CIRCULAR - Static variable in class nxopen.die.PierceHoleChildBuilder.ShapeTypeOption
-
circular hole
- CIRCULAR - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType
-
Circular shaped hole
- CIRCULAR - Static variable in class nxopen.drawings.DetailViewBuilder.Types
-
Circular boundary
- circular() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the circular toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
- CIRCULAR - Static variable in class nxopen.Edge.EdgeType
-
Circular edge
- CIRCULAR - Static variable in class nxopen.facet.FacetedEdge.FacetededgeType
-
Circular edge
- CIRCULAR - Static variable in class nxopen.features.AestheticFaceBlendBuilder.ShapeType
-
Circular option will always generate a constant radius arc shape.
- CIRCULAR - Static variable in class nxopen.features.EdgeBlendBuilder.Section
-
Default option, circular shaped blends
- CIRCULAR - Static variable in class nxopen.features.ExtensionBuilder.Extension
-
Circular extension
- CIRCULAR - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
-
- CIRCULAR - Static variable in class nxopen.features.PatternFaceBuilder.PatternTypes
-
This stands for circular pattern type.
- CIRCULAR - Static variable in class nxopen.features.SectionSurfaceBuilderEx.Types
-
Circular type
- CIRCULAR - Static variable in class nxopen.features.sheetmetal.BeadBuilder.CrossSectionTypeOptions
-
- CIRCULAR - Static variable in class nxopen.features.shipdesign.PenetrationRequest.CoutoutType
-
- CIRCULAR - Static variable in class nxopen.features.TrimCurve2Builder.CurveExtension
-
- CIRCULAR - Static variable in class nxopen.features.TrimCurveBuilder.CurveExtensionTypes
-
Circular
- CIRCULAR - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.CalculationMethodType
-
- CIRCULAR - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.Types
-
Circular
- CIRCULAR - Static variable in class nxopen.geometricutilities.ExtensionDirection
-
Extension Direction Linear
- CIRCULAR - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
pattern in angular and radial directions.
- CIRCULAR - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.AssignMethod
-
Deprecated.
User specified diameter, creates round
space reservation stock.
- CIRCULAR - Static variable in class nxopen.mechanicalrouting.PathStockPreferenceBuilder.SpaceReservationMethod
-
User specified diameter, creates round
space reservation stock.
- CIRCULAR - Static variable in class nxopen.motion.AnalyticalContactBuilder.ProfileType
-
- CIRCULAR - Static variable in class nxopen.preferences.DetailBoundaryOption
-
Circular boundary
- CIRCULAR - Static variable in class nxopen.routing.CustomManager.DuctSizeCalculatorDuctShape
-
- CIRCULAR - Static variable in class nxopen.routing.DuctSizeCalculatorBuilder.DuctShapeType
-
- CIRCULAR - Static variable in class nxopen.routing.electrical.ElectricalStockDefinition.SectionType
-
- CIRCULAR - Static variable in class nxopen.SketchPattern.Type
-
The pattern type is circular pattern
- CIRCULAR - Static variable in class nxopen.tooling.BomBuilder.Shape
-
The circular type.
- CIRCULAR - Static variable in class nxopen.tooling.BurringInsertBuilder.CircularOrNonCircularType
-
- CIRCULAR - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes
-
- CIRCULAR - Static variable in class nxopen.tooling.LayoutBuilder.LayoutType
-
Circle layout
- CIRCULAR - Static variable in class nxopen.tooling.RunnerBuilder.SectionType
-
Use circular section type.
- CIRCULAR - Static variable in class nxopen.tooling.UndersizeBuilder.Orbit
-
circular
- CIRCULAR_ARC - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.SectionCurveType
-
- CIRCULAR_ARRAY - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
circular array
- CIRCULAR_ARRAY - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
-
circular array
- CIRCULAR_CCW - Static variable in class nxopen.cam.CamOperationMotionShapeType
-
- CIRCULAR_CROSS_SECTION - Static variable in class nxopen.motion.TirePropertyTnoBuilder.ContactMethodType
-
- CIRCULAR_CUTOUT - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
-
Circular shaped relief
- CIRCULAR_CUTOUT - Static variable in class nxopen.features.sheetmetal.EditCornerBuilder.CornerReliefTypeOptions
-
- CIRCULAR_CUTOUT - Static variable in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
-
corner has a circular cutout in it
- CIRCULAR_CUTOUT - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
-
- CIRCULAR_CW - Static variable in class nxopen.cam.CamOperationMotionShapeType
-
- CIRCULAR_DRAWING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
circular drawing
- CIRCULAR_PATTERN - Static variable in class nxopen.positioning.Constraint.Type
-
For internal use only
- CIRCULAR_REGION - Static variable in class nxopen.annotations.RegionBuilder.Types
-
circular
- CIRCULAR_REGION - Static variable in class nxopen.uf.UFGdt.GeometricDefinitionType
-
- CIRCULAR_RUNOUT - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
circular runout
- CIRCULAR_RUNOUT - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies cirular runout characteristics
- CIRCULAR_RUNOUT - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
circular runout
- CIRCULAR_RUNOUT - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Circular Runout
- CIRCULAR_RUNOUT_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- CIRCULAR_SCAN - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Scan Arc
- CIRCULAR_SHAPED - Static variable in class nxopen.uf.UFModl.BeadShape
-
- CIRCULAR_SPACE_WIDTH_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- CIRCULAR_TOOTH_THICKNESS_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- CIRCULAR_TYPE - Static variable in class nxopen.tooling.ScrapDesignBuilder.OvercutType
-
Creates circular type of overcut
- CIRCULAR_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- CircularAboutAxisMoveBuilder - Interface in nxopen.cam
-
- CircularAboutAxisMoveBuilder.AxisType - Class in nxopen.cam
-
the axis type
- CircularAboutAxisMoveBuilder.EndType - Class in nxopen.cam
-
the motion end type
- CircularAboutAxisMoveBuilder.ExtensionType - Class in nxopen.cam
-
the extension type
- circularAreaMomentOfInertia(double) - Method in interface nxopen.EngineeringFunction
-
Calculate the area moment of inertia of circular cross section.
- CircularBlendCurve - Interface in nxopen.features
-
Represents a Circular Blend Curve feature
To create or edit an instance of this class, use
CircularBlendCurveBuilder
Created in NX5.0.0
- CircularBlendCurveBuilder - Interface in nxopen.features
-
- CircularBlendCurveBuilder.CylinderDirectionOption - Class in nxopen.features
-
Represents the cylinder direction options
- CircularBlendCurveBuilder.CylinderRadiusOption - Class in nxopen.features
-
Represents the cylinder radius options
- CircularCenterline - Interface in nxopen.annotations
-
Represents a CircularCenterline centerline
To create or edit an instance of this class, use
CircularCenterlineBuilder
Created in NX6.0.0
- CircularCenterlineBuilder - Interface in nxopen.annotations
-
- circularCount() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the count of circular pattern, don't use it until nx502
License requirements: None.
- circularCrossSection() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the face blend circular section
License requirements: None.
- CircularCrossSection - Interface in nxopen.geometricutilities
-
Represents a circular section data for face blend.
- circularDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the circular definition.
- CircularEdgeMethod - Interface in nxopen.cae
-
Represents the output from the circular edge smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- circularEdgesFixedCenterLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a circular flat plate with the edge fixed
around circumference under a concentrated load at the center.
- circularEdgesFixedCenterLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a circular flat plate with the edge fixed
around circumference under a concentrated load at the center.
- circularEdgesFixedUniformLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a circular flat plate with the edge fixed around
circumference under a uniformly distributed load over the surface of the plate.
- circularEdgesFixedUniformLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a circular flat plate with the edge fixed
around circumference under a uniformly distributed load over the surface of the plate.
- circularEdgesSupportedCenterLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a circular flat plate with the edge supported
around the circumference under a concentrated load at the center.
- circularEdgesSupportedCenterLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a circular flat plate with the edge
supported around the circumference under a concentrated load at the center.
- circularEdgesSupportedUniformLoadDeflection(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum deflection of a circular flat plate with the edge supported
around the circumference under a uniformly distributed load over the surface of the plate.
- circularEdgesSupportedUniformLoadStress(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum tensile stress of a circular flat plate with the edge supported
around the circumference under a uniformly distributed load over the surface of the plate.
- circularFrame() - Method in interface nxopen.geometricanalysis.sectionanalysis.CircularGridBuilder
-
Returns the circular frame
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- CircularFrameBuilder - Interface in nxopen.geometricutilities
-
- CircularFrameBuilder.Subtypes - Class in nxopen.geometricutilities
-
Represents the circular frame subtypes
- circularGrid() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the circular grid.
- CircularGridBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
-
- CircularImprintBuilder - Interface in nxopen.cae
-
- CircularImprintBuilder.AroundEdgeDiaType - Class in nxopen.cae
-
Around Edge Diameter Option
- circularInsert() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the insert to do circular array.
- CIRCULARITY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
circularity
- CIRCULARITY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
circularity
- CIRCULARITY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Circularity
- CircularMotion() - Constructor for class nxopen.uf.UFPath.CircularMotion
-
- CircularMotion(double[], double[], double[], double[], double[], double[], double, double, double, UFPath.FeedUnit, UFPath.MotionType, UFPath.Side, UFPath.Shape) - Constructor for class nxopen.uf.UFPath.CircularMotion
-
- circularMotionCentripetalAcceleration(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the centripetal acceleration from velocity and radius or distance.
- circularOperation() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the circular array operation.
- circularOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the orientationOption for Circular pattern type
License requirements: None.
- circularOrNonCircular() - Method in interface nxopen.tooling.BurringInsertBuilder
-
Returns the circular or non circular type.
- CircularPattern - Interface in nxopen.geometricutilities
-
the circular pattern definition.
- CircularPattern.StaggerOptions - Class in nxopen.geometricutilities
-
defines any stagger to be defined on the pattern.
- circularScan() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns a flag to indicate if scan arc is allowed
License requirements: None.
- circularSegments() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- circularSegments() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the number of segments in circular direction.
- circularSlugHole() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the circular slug hole switch of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- circularSlugHole() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the circular slug hole switch of pierce holes
License requirements: ug_die_design ("Die Design")
.
- CircularTarget - Interface in nxopen.annotations
-
Represents a circular datum target
To create or edit an instance of this class, use
PmiDatumTargetBuilder
Created in NX4.0.0
- CircularTargetData - Interface in nxopen.annotations
-
Represents circular datum target data .
- circularTypeMode() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the circular type mode.
- circularVector() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the specified vector for defining circular array axis.
- CIRCUMCIRCLE - Static variable in class nxopen.tooling.BomBuilder.Circle
-
Circumcircle.
- CIRCUMSCRIBED - Static variable in class nxopen.geometricutilities.PolygonPattern.SizeOptions
-
use circumscribed circle to define a polygon
- CIRCUMSCRIBED - Static variable in class nxopen.tooling.StockSizeBuilder.Cylinder
-
circumcircle based cylinder
- CIRCUMSCRIBED_RADIUS - Static variable in class nxopen.SketchPolygonBuilder.SizeType
-
circumscribed radius
- cirRadius() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the radius value
License requirements: None.
- cirRotateAngle() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the rotate angle
License requirements: None.
- cirStartAngle() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the start angle
License requirements: None.
- CLADDING_DIAMETER - Static variable in class nxopen.ame.OpticalAnnotationSettingsBuilder.AnnotationAttrType
-
- CLAMP - Static variable in class nxopen.cae.connections.DofCombination
-
DOF1 fixed, DOF2 fixed, DOF3 fixed, DOF4 fixed, DOF5 fixed, DOF6 fixed
- CLAMP_AXIS_OFF - Static variable in class nxopen.uf.UFPath.ClampStatus
-
- CLAMP_AXIS_ON - Static variable in class nxopen.uf.UFPath.ClampStatus
-
- CLAMP_OFF - Static variable in class nxopen.uf.UFPath.ClampStatus
-
- CLAMP_ON - Static variable in class nxopen.uf.UFPath.ClampStatus
-
- CLAMP_STATUS_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.ClampStatus
-
- CLAMPED - Static variable in class nxopen.cae.aerostructures.author.ABB.EdgeSupportType
-
Clamped
- CLAMPED_CLAMPED - Static variable in class nxopen.cae.aerostructures.author.ABB.UnloadedEdgeSupportType
-
Clamped-Clamped
- ClampingSlot - Interface in nxopen.die
-
Represents a clamping slot feature
To create or edit an instance of this class, use
ClampingSlotBuilder
Created in NX6.0.0
- clampingSlot(ClampingSlot) - Method in interface nxopen.die.DieCollection
-
- ClampingSlotBuilder - Interface in nxopen.die
-
- ClampingSlotBuilder.Types - Class in nxopen.die
-
Clamping slot types
- CLASS - Static variable in class nxopen.cam.CollisionPairBuilder.Filter
-
class filter
- class4gd() - Method in interface nxopen.weld.UserDefinedWeldBuilder
-
Returns the 4GD class option.
- CLASS_A - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.ClassificationType
-
Class A Classification Type.
- CLASS_A - Static variable in class nxopen.HumanPosturePredictionBuilder.VehicleType
-
Indicate Class A vehicle.
- CLASS_B - Static variable in class nxopen.features.vehicledesign.ManikinBuilder.ClassificationType
-
Class B Classification Type.
- CLASS_B - Static variable in class nxopen.HumanPosturePredictionBuilder.VehicleType
-
Indicate Class B vehicle.
- CLASS_SEATED_SOLDIER - Static variable in class nxopen.HumanPosturePredictionBuilder.VehicleType
-
Seated soldier
- classAOption() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the class A option
License requirements: None.
- ClassData() - Constructor for class nxopen.uf.UFFam.ClassData
-
- ClassData(int, int, UFFam.AttributeData[], String) - Constructor for class nxopen.uf.UFFam.ClassData
-
- classes - Variable in class nxopen.uf.UFKf.AskAllClassesData
-
- classes - Variable in class nxopen.uf.UFKf.AskClassesData
-
- classId() - Method in interface nxopen.mechatronics.SelectClassificationBuilder
-
Returns the Teamcenter storage class id.
- CLASSIFICATION - Static variable in class nxopen.ame.EditClauseBuilder.Types
-
- classification() - Method in interface nxopen.ame.SelectClassificationFromTreeBuilder
-
Returns the classification
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- classification() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the classification of the vehicle
License requirements: None.
- CLASSIFICATION - Static variable in class nxopen.routing.RoutingAttributeIdentifierType
-
An identifier for a Teamcenter classification attribute
- CLASSIFICATION - Static variable in class nxopen.routing.RoutingBulkReplacementBuilderLibrarySelectSourceType
-
Library select source is a classification object
- classification() - Method in interface nxopen.sim.KinematicJunctionBuilder
-
Returns the classification of the junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- classificationItem() - Method in interface nxopen.ame.NamingRuleBuilder
-
Returns the classification item
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- classificationItem() - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
Returns the classification item
License requirements: None.
- classificationOperator() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the query operator for Classification object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- classificationProperty() - Method in interface nxopen.ame.SelectClassificationFromTreeBuilder
-
Returns the classification property
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- classifiedSetList - Variable in class nxopen.uf.UFFbmGeom.ClassifyByCriteriaData
-
- Classifier - Interface in nxopen.visualreporting
-
A Classifier within a
Rule
.
- Classifier.DateGroupMethodOption - Class in nxopen.visualreporting
-
Represents the possible date grouping method options.
- Classifier.GroupingMethodOption - Class in nxopen.visualreporting
-
Represents the possible grouping method options.
- Classifier.RangeMethodOption - Class in nxopen.visualreporting
-
Represents the possible range method options.
- Classifier.TypeOption - Class in nxopen.visualreporting
-
Represents the possible type options.
- classifyByCriteria(Tag, int, String[]) - Method in interface nxopen.uf.UFFbmGeom
-
- ClassifyByCriteriaData() - Constructor for class nxopen.uf.UFFbmGeom.ClassifyByCriteriaData
-
- className() - Method in interface nxopen.ame.SelectClassificationBuilder
-
Returns the class of the name from the reuse library classification
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- className() - Method in interface nxopen.features.CustomFeatureData
-
Returns the custom feature class name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- className() - Method in interface nxopen.features.UserDefinedFeatureClass
-
Returns the class name
License requirements: None.
- className() - Method in interface nxopen.features.UserDefinedFeatureCopyEvent
-
Returns the class name
License requirements: None.
- className() - Method in interface nxopen.features.UserDefinedFeatureCreateEvent
-
Returns the class name
License requirements: None.
- className() - Method in interface nxopen.features.UserDefinedFeatureEditEvent
-
Returns the class name
License requirements: None.
- className() - Method in interface nxopen.features.UserDefinedFeatureIconEvent
-
Returns the class name
License requirements: None.
- className() - Method in interface nxopen.features.UserDefinedFeatureUpdateEvent
-
Returns the class name
License requirements: None.
- className() - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
- className() - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Returns the class name of this UDO
License requirements: None.
- className() - Method in interface nxopen.validate.CheckerNode
-
Returns the checker class name
License requirements: None.
- className() - Method in interface nxopen.validate.ResultObject
-
Returns the class name of check result.
- clause() - Method in interface nxopen.NavigatorFilter
-
- clauseOperator() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the clause operator of query
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- CLAY - Static variable in class nxopen.display.TrueStudioBuilder.GlobalMaterial
-
Overrides the object color with a clay material display.
- clcName - Variable in class nxopen.uf.UFSf.AskCombinedLoadCaseData
-
- clcTags - Variable in class nxopen.uf.UFSf.AskCombinedLoadCasesData
-
- CLEAN_BOTH_WALLS - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
-
Part Off Depth Mode: Clean Both Walls
- CLEAN_FIRST_WALL - Static variable in class nxopen.cam.RoughTurningBuilder.PartOffDepthModeTypes
-
Part Off Depth Mode: Clean First Wall
- cleanBody() - Method in interface nxopen.features.OptimizeFaceBuilder
-
Returns the clean body flag.
- cleanMappingData() - Method in interface nxopen.Section
-
Cleans Mapping Data
This method should be used to clean mapping data after mapping is done
License requirements: gateway ("UG GATEWAY")
.
- cleanModelView - Variable in class nxopen.uf.UFDraw.ViewInfo
-
- cleanPlantModel(ModelPlantRoot) - Method in interface nxopen.linedesigner.ModelPlantManager
-
Clean Plant Model
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- CLEANRANCE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType
-
- cleanSelectedFeaList() - Method in interface nxopen.uf.UFMfm
-
- cleanTargetSet(int) - Method in interface nxopen.cae.SetManager
-
Clears the objects stored in the set specified in
the set manager
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- cleanup() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Cleanup
License requirements: None.
- cleanUp() - Method in interface nxopen.facet.ConvertFacetBodyBuilder
-
Returns an option for automatically repairing the converted PSM mesh
License requirements: None.
- cleanUp() - Method in interface nxopen.facet.STLImportBuilder
-
Returns the option to clean up all mesh defects on import
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- cleanup(int) - Method in interface nxopen.uf.UFPart
-
- cleanupAssemblyConstraints() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to cleanup assembly constraints.
- cleanupCAMObjects() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to delete or fix any corrupt
internal CAM objects.
- cleanupComponent() - Method in interface nxopen.linedesigner.FastPlacementUtilityBuilder
-
To cleanup component
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- cleanupControl() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the cleanup control
License requirements: None.
- cleanupDraftingObjects() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to perform drafting cleanup.
- CleanupFacetBodyBuilder - Interface in nxopen.facet
-
- CleanupFacetBodyBuilder.CleanupOptions - Class in nxopen.facet
-
These represent the options for each facet defect
- CleanupFacetBodyBuilder.OriginalBodyOptions - Class in nxopen.facet
-
These represent the options for handling the input bodies
- cleanUpFacetedFacesAndEdges() - Method in interface nxopen.Session
-
- cleanupFeatureData() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to perform solid cleanup.
- cleanUpFeaturesCreated() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Cleans up the features created by the selecting face call back.
- cleanupMatingData() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to cleanup mating data.
- cleanupMotionData() - Method in interface nxopen.PartCleanup
-
Returns the option which determines if the motion cleanup option should be performed.
- CleanupOutput - Interface in nxopen.cam
-
- cleanupOutput() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Cleanup Output
License requirements: None.
- CleanupOutput.GeomTypes - Class in nxopen.cam
-
Available types for cleanup outputing geometry type, Cleanup Geometry Output
- cleanupPartFamilyData() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies if the part family data cleanup should be performed.
- cleanupPasses() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Cleanup Passes
License requirements: None.
- cleanupRoutingData() - Method in interface nxopen.PartCleanup
-
Returns the option which determines if the routing part cleanup option should be performed.
- CleanupSettings - Interface in nxopen.cam
-
- cleanupSettings() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Cleanup Settings
License requirements: None.
- cleanUpTemporaryCurves() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Cleans up the temp curves.
- cleanupType() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
Returns the fine_finish_corner cleanup
License requirements: None.
- cleanupType() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the cleanup type
License requirements: None.
- CleanUpUtilityBuilder - Interface in nxopen.features.sheetmetal
-
- clear() - Method in interface nxopen.ame.NamingRuleBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Removes all items from the list.
- clear() - Method in interface nxopen.ame.TypeMappingBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.annotations.LeaderDataList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.LeaderDataList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.annotations.SelectAnnotationList
-
Removes all items from the list.
- clear() - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Removes all items from the list.
- clear() - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Removes all items from the list.
- clear() - Method in interface nxopen.annotations.SelectTableSectionList
-
Removes all items from the list.
- clear() - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.assemblies.PartitionList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.assemblies.PartitionList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.assemblies.SelectComponentList
-
Removes all items from the list.
- clear() - Method in interface nxopen.BodyList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.BodyList
-
Clears the entire list
License requirements: None.
- CLEAR - Static variable in class nxopen.cae.BeamEADBuilder.State
-
clear the property
- CLEAR - Static variable in class nxopen.cae.BushingEADBuilder.State
-
clear the property
- CLEAR - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsEndReleaseState
-
Clear end release values.
- CLEAR - Static variable in class nxopen.cae.DamperEADBuilder.State
-
clear the property
- clear() - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Clears the entire list
License requirements: None.
- CLEAR - Static variable in class nxopen.cae.GapEADBuilder.State
-
clear the property
- clear() - Method in interface nxopen.cae.LaminateSelectEntitiesBuilder
-
Clears the selection list
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- CLEAR - Static variable in class nxopen.cae.LumpedMassEADBuilder.State
-
clear the property
- clear() - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cae.OrderedSelection
-
Removes all objects from the list
License requirements: None.
- CLEAR - Static variable in class nxopen.cae.RigidEADBuilder.State
-
clear the property
- clear() - Method in interface nxopen.cae.SelectCAEBodyList
-
Removes all items from the list.
- clear() - Method in interface nxopen.cae.SelectCAEEdgeList
-
Removes all items from the list.
- clear() - Method in interface nxopen.cae.SelectCAEFaceList
-
Removes all items from the list.
- clear() - Method in interface nxopen.cae.SelectFEElemFaceList
-
Removes all items from the list.
- clear() - Method in interface nxopen.cae.SelectFENodeList
-
Removes all items from the list.
- clear() - Method in interface nxopen.cae.SelectMeshList
-
Removes all items from the list.
- CLEAR - Static variable in class nxopen.cae.ShellEADBuilder.State
-
clear the property
- CLEAR - Static variable in class nxopen.cae.SpringEADBuilder.State
-
clear the property
- clear() - Method in interface nxopen.cae.ThicknessBuilder
-
The clear context
License requirements: nx_masterfem ("Finite Element Modeling")
.
- clear() - Method in interface nxopen.cam.BoundaryMemberSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.BoundarySetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundarySetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.CAMFeatureList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.CAMFeatureList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.CollisionPairBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.CustomLoopSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.CustomLoopSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.CutVolumeList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.CutVolumeList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.GeometrySetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.GeometrySetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.HoleBossSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.HoleBossSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.LaserControlPointList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.LaserControlPointList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.SelectCAMFeatureList
-
Removes all items from the list.
- clear() - Method in interface nxopen.cam.SplitterList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.SplitterList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.TabPointDataBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.ThreadedBossSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.ThreadedBossSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.ThreadedHoleSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.UdeList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.UdeList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.cam.WireGuideList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.cam.WireGuideList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.DateItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.DateItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.diagramming.PortBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.diagramming.PortBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.die.DieBooleanBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieBooleanBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.die.DieLimitsBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieLimitsBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.die.DieLocationBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DieLocationBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.die.PierceItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.die.PierceItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
- clear() - Method in interface nxopen.drawings.SelectDraftingViewList
-
Removes all items from the list.
- clear() - Method in interface nxopen.drawings.SelectDrawingViewList
-
Removes all items from the list.
- clear() - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.ErrorList
-
Clears the list
License requirements: None.
- clear() - Method in interface nxopen.ExpressionCollectorSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.ExpressionCollectorSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.ExpressionSectionSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.ExpressionSectionSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.facet.SelectFacetedBodyList
-
Removes all items from the list.
- clear() - Method in interface nxopen.features.FeatureList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.FeatureList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.GeometricConstraintDataManager
-
- clear() - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.RegionListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.RegionListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.SelectBodyFeatureList
-
Removes all items from the list.
- clear() - Method in interface nxopen.features.SelectDatumCsysList
-
Removes all items from the list.
- clear() - Method in interface nxopen.features.SelectFeatureList
-
Removes all items from the list.
- clear() - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.SmoothRangeBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Removes all items from the list.
- clear() - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.fields.PathObjectsList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.fields.PathObjectsList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.gateway.BaseExplicitOrderBuilder
-
Clears the current order and restores it to the default order
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.SelectionListList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.SelectionListList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.layout2d.SelectComponentList
-
Removes all items from the list.
- clear() - Method in interface nxopen.ListCreatorList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.ListCreatorList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Removes all items from the list.
- clear() - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Removes all items from the list.
- clear() - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Removes all items from the list.
- clear() - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Removes all items from the list.
- clear() - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.ModelingViewList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.ModelingViewList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.motion.ConfigurationParameterList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.motion.ConfigurationParameterList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.motion.InputPortAssociationList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.motion.InputPortAssociationList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.motion.OutputPortAssociationList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.motion.OutputPortAssociationList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.motion.PortVariableList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.motion.PortVariableList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.motion.SegmentBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.motion.SegmentBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.motion.SignalChartListItemList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.motion.SignalChartListItemList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.NXObjectList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.NXObjectList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.ObjectList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.ObjectList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.PlaneList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.PlaneList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.PointList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.PointList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.RegionPointList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.RegionPointList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.report.AutomationLogger
-
Clears the messages in the logger.
- clear() - Method in interface nxopen.report.BaseItem
-
Clears the content in this class.
- clear() - Method in interface nxopen.routing.RunItemsBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.routing.RunItemsBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.ScCollectorList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.ScCollectorList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.Section
-
Clear the section of all its constituents
License requirements: gateway ("UG GATEWAY")
.
- clear() - Method in interface nxopen.SectionList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.SectionList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.SelectBodyList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectCoordinateSystemList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectCurveList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectDatumPlaneList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectDisplayableObjectList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectEdgeList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectExpressionList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectFaceList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectIBaseCurveList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectIBasePlaneList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectICurveList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectINXObjectList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectModelingViewList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectNXObjectList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectObjectList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectPartList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectPointList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectSplineList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectTaggedObjectList
-
Removes all items from the list.
- clear() - Method in interface nxopen.SelectViewList
-
Removes all items from the list.
- clear() - Method in interface nxopen.sim.KinematicChainList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicChainList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.Spreadsheet
-
Clears the contents of the current worksheet.
- clear() - Method in interface nxopen.TaggedObjectList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.TaggedObjectList
-
Clears the entire list
License requirements: None.
- CLEAR - Static variable in class nxopen.tooling.MWPartingManagerBuilder.RegisterType
-
Clear all registered UNDO identifiers.
- clear() - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.UFSession
-
- clear() - Method in interface nxopen.weld.JointItemBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.JointItemBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Clears the entire list
License requirements: None.
- clear() - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Clears the entire list without deleting the objects.
- clear(ObjectList.DeleteOption) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Clears the entire list
License requirements: None.
- CLEAR_AND_ENABLE_SPECIFIC - Static variable in class nxopen.Selection.SelectionAction
-
Clear selection and include selected objects
- CLEAR_AXIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Clear Axial
- CLEAR_AXIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Clear Axial
- CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Clear Axial-Direct
- CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Clear Axial-Direct
- CLEAR_AXIAL_ONLY - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Motion type: Axial to clearance plane only (no motion to point).
- CLEAR_AXIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
-
Motion type: Axial to clearance plane then direct to point.
- CLEAR_AXIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Motion type: Axial to clearance plane then direct to point.
- CLEAR_AXIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
-
Motion type: Axial to clearance plane then direct to point.
- CLEAR_AXIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
-
Motion type: Axial to clearance plane then direct to start of engage.
- CLEAR_RADIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Clear Radial
- CLEAR_RADIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Clear Radial
- CLEAR_RADIAL_AXIAL_RADIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Clear Radial-Axial-Radial
- CLEAR_RADIAL_AXIAL_RADIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Clear Radial-Axial-Radial
- CLEAR_RADIAL_CLEAR_AXIAL - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Clear Radial-Clear Axial
- CLEAR_RADIAL_CLEAR_AXIAL - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Clear Radial-Clear Axial
- CLEAR_RADIAL_CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Clear Radial-Clear Axial-Direct
- CLEAR_RADIAL_CLEAR_AXIAL_DIRECT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Clear Radial-Clear Axial-Direct
- CLEAR_RADIAL_DIRECT - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnTypes
-
Clear Radial-Direct
- CLEAR_RADIAL_DIRECT - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes
-
Return Move: Clear Radial-Direct
- CLEAR_RADIAL_ONLY - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Motion type: Radial to clearance plane only (no motion to point).
- CLEAR_RADIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceGohomeBuilder.GohomePointMotionTypes
-
Motion type: Radial to clearance plane then direct to point.
- CLEAR_RADIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceReturnBuilder.ReturnPointMotionTypes
-
Motion type: Radial to clearance plane then direct to point.
- CLEAR_RADIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartBuilder.StartPointMotionTypes
-
Motion type: Radial to clearance plane then direct to point.
- CLEAR_RADIAL_THEN_DIRECT - Static variable in class nxopen.cam.TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes
-
Motion type: Radial to clearance plane then direct to start of engage.
- CLEAR_WALLS - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Clear Walls
- CLEAR_WALLS_BY_ANGLE_AND_DISTANCE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Clear Walls by Angle and Distance
- CLEAR_WALLS_BY_DISTANCE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Clear Walls by Distance
- clearAbort() - Method in interface nxopen.uf.UFAbort
-
- clearAddingCandidates() - Method in interface nxopen.tooling.AssignPatchBuilder
-
Clear the m_addingCandidates list.
- clearAll() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
Clear all selected objects
License requirements: None.
- clearAllAttributes() - Method in interface nxopen.cae.AttributeSelectionRecipe
-
Clear all attributes
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- clearAllChecks() - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Clear or unset all types of checks
License requirements: None.
- clearAllConstraints() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Clear all of the indivivual constraints (turn toggle to off for each one)
License requirements: solid_modeling ("SOLIDS MODELING")
.
- clearAllManualPairs() - Method in interface nxopen.cae.CorrelModePairingBuilder
-
Clear all manually paired mode pairs
License requirements: nx_correl_base ("FE Correlation")
.
- clearAllPorts() - Method in interface nxopen.routing.LogicalTerminal
-
- clearAllRegionTrackers() - Method in interface nxopen.geometricutilities.BooleanRegionSelect
-
Clears all region trackers currently registered on the feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- clearAllTree() - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Clears the tree list and allows you to perform another search.
- clearance() - Method in interface nxopen.cae.modelcheck.FaceClearanceCheckBuilder
-
Returns the clearance.
- CLEARANCE - Static variable in class nxopen.cam.NcmHoleMachining.FinalTypes
-
clearance
- CLEARANCE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes
-
Clearance - Tool Axis
- CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalTypes
-
tool axis clearance
- CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes
-
tool axis to clearance
- CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenLevelsTypes
-
clearance
- CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
-
tool axis to clearance
- CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
tool axis to clearance
- CLEARANCE - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
-
tool axis to clearance
- CLEARANCE - Static variable in class nxopen.cam.NcmTransferTypes.FinalTypes
-
clearance
- CLEARANCE - Static variable in class nxopen.cam.NcmTransferTypes.InitialTypes
-
Clearance - Tool Axis
- CLEARANCE - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.AppMethodTypes
-
from/to clearance
- CLEARANCE - Static variable in class nxopen.cam.ProbeProtectedParametersBuilder.DepMethodTypes
-
from/to clearance
- CLEARANCE - Static variable in class nxopen.cam.ToolPathSplitBuilder.TransferTypes
-
clearance transfer type
- CLEARANCE - Static variable in class nxopen.cam.ToolPathSplitParametersBuilder.TransferTypes
-
clearance transfer type
- Clearance - Interface in nxopen.die
-
Represents a die design clearance feature.
- clearance() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the expression containing the clearance value between the male and female bead sheets.
- clearance() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the expression containing the value to use for the clearance offset of the core from the base plane.
- clearance() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the clearance of the handling core.
- clearance() - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Returns the clearance of handling cores.
- clearance() - Method in interface nxopen.die.PressureSystemChildBuilder
-
Returns the clearance of the pressure system.
- clearance() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the clearance of pressure systems.
- clearance() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Returns the clearance used in the automatic generation of the lower post flange profile
License requirements: None.
- clearance() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the emboss clearance
License requirements: None.
- clearance() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the clearance
License requirements: None.
- clearance() - Method in interface nxopen.features.sheetmetal.JoggleSideOptionsBuilder
-
Returns the clearance
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- clearance() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
Returns the clearance
License requirements: None.
- clearance() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the clearance value for box in six directions.
- clearance() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the clearance value for box in six directions.
- CLEARANCE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.BottomPlateSlugItems
-
Bottom plate slug type is clearance
- CLEARANCE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType
-
- CLEARANCE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems
-
Die shoe slug type is clearance
- clearance() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the clearance
License requirements: None.
- CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Bottom plate slug type is clearance
- CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Die shoe slug type is clearance
- CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsBP
-
Punch pocket type in backing plate is clearance
- CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsPP
-
Punch pocket type in punch plate is clearance
- CLEARANCE - Static variable in class nxopen.tooling.PiercingInsertBuilder.PunchPocketTypeItemsSP
-
Punch pocket type in stripper plate is clearance
- CLEARANCE - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsBackingPlate
-
Punch pocket type in backing plate is clearance
- CLEARANCE - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsPunchPlate
-
Punch pocket type in punch plate is clearance
- CLEARANCE - Static variable in class nxopen.tooling.PunchInsertBuilder.PunchPocketTypeItemsStripperPlate
-
Punch pocket type in stripper plate is clearance
- clearance() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the clearance of KF bounding box.
- clearance() - Method in interface nxopen.tooling.ReplaceSolidBuilder
-
Returns the clearance value for box in six directions.
- CLEARANCE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType
-
Bottom backing plate slug type is clearance
- CLEARANCE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalDieShoeSlugType
-
Die shoe slug type is clearance
- clearance() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the clearance of the stocksize.
- clearance() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the single side clearance value of the bounding box.
- clearance1() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the first clearance to create handle to control -X direction clearance.
- clearance2() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the second clearance to create handle to control -Y direction clearance.
- clearance3() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the third clearance to create handle to control -Z direction clearance.
- clearance4() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the fourth clearance to create handle to control +X direction clearance.
- clearance5() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the fifth clearance to create handle to control +Y direction clearance.
- clearance6() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the sixth clearance to create handle to control +Z direction clearance.
- CLEARANCE_ANGLE - Static variable in class nxopen.cam.ToolAxisInterpolate.TurnInputModeTypes
-
clearance angle
- CLEARANCE_CUT_PLANE - Static variable in class nxopen.cam.NcmHoleMachining.FinalTypes
-
Clearance - Cut Plane
- CLEARANCE_CUT_PLANE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes
-
Clearance - Cut Plane
- CLEARANCE_CUT_PLANE - Static variable in class nxopen.cam.NcmTransferTypes.FinalTypes
-
Clearance - Cut Plane
- CLEARANCE_CUT_PLANE - Static variable in class nxopen.cam.NcmTransferTypes.InitialTypes
-
Clearance - Cut Plane
- CLEARANCE_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- CLEARANCE_INITIAL - Static variable in class nxopen.cam.HoleDrillingBuilder.RetractOutputModeType
-
canned retract to clearance and initial level
- CLEARANCE_ONLY - Static variable in class nxopen.cam.HoleDrillingBuilder.RetractOutputModeType
-
canned retract to clearance only
- CLEARANCE_PLANE - Static variable in class nxopen.cam.PlungeMillingBuilder.TransferMethodTypes
-
Clearance Plane
- CLEARANCE_PLANE - Static variable in class nxopen.cam.ToolPathEditorBuilder.ConnectionMethodType
-
- CLEARANCE_SHORTEST_DISTANCE - Static variable in class nxopen.cam.NcmHoleMachining.FinalTypes
-
Clearance - Shortest Distance
- CLEARANCE_SHORTEST_DISTANCE - Static variable in class nxopen.cam.NcmHoleMachining.InitialTypes
-
Clearance - Shortest Distance
- CLEARANCE_SHORTEST_DISTANCE - Static variable in class nxopen.cam.NcmTransferTypes.FinalTypes
-
Clearance - Shortest Distance
- CLEARANCE_SHORTEST_DISTANCE - Static variable in class nxopen.cam.NcmTransferTypes.InitialTypes
-
Clearance - Shortest Distance
- clearanceAnalysisBodies() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the selection list containing the solid objects used in the clearance analysis.
- ClearanceAnalysisBuilder - Interface in nxopen.assemblies
-
- ClearanceAnalysisBuilder.CalculationMethodType - Class in nxopen.assemblies
-
Specify the analysis method.
- ClearanceAnalysisBuilder.ClearanceBetweenEntity - Class in nxopen.assemblies
-
Specify the type of clearance analysis.
- ClearanceAnalysisBuilder.ClearanceZoneSource - Class in nxopen.assemblies
-
Specify the source of the clearance zone
- ClearanceAnalysisBuilder.CollectionRange - Class in nxopen.assemblies
-
Specify how to compare objects inside a collection.
- ClearanceAnalysisBuilder.IsPairIncludedData - Class in nxopen.assemblies
-
- ClearanceAnalysisBuilder.NumberOfCollections - Class in nxopen.assemblies
-
Specify the number of collections used for clearance analysis.
- ClearanceAnalysisBuilder.PairClearanceZoneData - Class in nxopen.assemblies
-
- ClearanceAnalysisBuilder.PairExcludedReason - Class in nxopen.assemblies
-
Specify the reason for excluding the pair
- ClearanceAnalysisBuilder.ZoneType - Class in nxopen.assemblies
-
Specify the clearance zone type.
- clearanceAnalysisComponents() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the selection list containing the components used in the clearance analysis.
- clearanceBetween() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the setting to determine whether components or bodies should be used.
- clearanceBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the clearance builder (inheritable tool dep)
License requirements: None.
- clearanceBuilder() - Method in interface nxopen.cam.ProbeClearanceMoveBuilder
-
Returns the NCM clearance builder
License requirements: None.
- ClearanceBuilder - Interface in nxopen.die
-
Represents a builder that is used to create or edit a
Clearance
feature.
- ClearanceBuilder.ClearanceGeometryTypes - Class in nxopen.die
-
Identifies which type of input defines the clearance.
- ClearanceBuilder.Types - Class in nxopen.die
-
Identifies which clearance type is being created in the casting.
- clearanceClacToggle() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Returns the clearanceClacToggle
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- clearanceCoefficient() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the clearance coefficient value.
- clearanceCollision() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Returns the clearance value of collision or interference
License requirements: None.
- clearanceColor() - Method in interface nxopen.cam.Preferences
-
Returns the clearance color
License requirements: None.
- clearanceDirection() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the direction to use when extruding to create the clearance areas.
- clearanceDirection() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the direction (pointing away from the solid) in which to clear material from the target solid.
- clearanceDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the clearance distance
License requirements: None.
- clearanceDistance() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns the transition clearance distance
License requirements: None.
- clearanceDistance() - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
Returns the safe clearance distance for external features
License requirements: None.
- clearanceExpression() - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
Returns the clearance expression value
License requirements: mechanisms ("MECHANISMS")
.
- clearanceGeomColor - Variable in class nxopen.uf.UFCam.Preferences
-
- clearanceGeometryType() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the input type of the clearance geometry.
- clearanceManagement() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ClearanceManagementCollection instance belonging to this part .
- ClearanceManagementBuilder - Interface in nxopen.tooling
-
Progressive Die Wizard builder to management clearances.
- ClearanceManagementBuilder.Selection - Class in nxopen.tooling
-
Specifies clearance management part.
- ClearanceManagementBuilder.Type - Class in nxopen.tooling
-
Specifies type to assign or check clearances
- ClearanceManagementCollection - Interface in nxopen.tooling
-
- clearancePlane() - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Returns the Clearance Plane tag,plane entity type covers Xform and Plane
License requirements: None.
- ClearanceSet - Interface in nxopen.assemblies
-
- ClearanceSet.CopyMode - Class in nxopen.assemblies
-
Specify the dataset copy mode
- ClearanceSet.InterferenceData - Class in nxopen.assemblies
-
- ClearanceSet.InterferenceType - Class in nxopen.assemblies
-
Specify the type of interference
- ClearanceSet.JobStatus - Class in nxopen.assemblies
-
Specify the job aborted status
- ClearanceSet.NextInterferenceData - Class in nxopen.assemblies
-
- ClearanceSet.PenetrationDepthResult - Class in nxopen.assemblies
-
The result of penetration depth calculation
- ClearanceSet.ReanalyzeOutOfDateExcludedPairs - Class in nxopen.assemblies
-
Specify whether to reanalyze out-of-date excluded pairs.
- ClearanceSet.ReanalyzePairCalculationMethod - Class in nxopen.assemblies
-
The analysis method to use when reanalyzing a pair.
- ClearanceSet.Summary - Class in nxopen.assemblies
-
Summary of the most recent Clearance Analysis results
- ClearanceSetCollection - Interface in nxopen.assemblies
-
- clearanceSetName() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the clearance set name.
- clearanceSets() - Method in interface nxopen.assemblies.ComponentAssembly
-
The collection of
ClearanceSet
s defined in the ComponentAssembly
Created in NX9.0.0
- clearanceTolerance() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the clearance tolerance
License requirements: None.
- clearanceType() - Method in interface nxopen.cam.NcmClearanceBuilder
-
Returns the clearance type
License requirements: None.
- clearanceValue() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the clearance value used in the clearance analysis.
- clearanceValue() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the clearance value.
- clearAndAdd(NXObject[], View, Point3d) - Method in interface nxopen.features.subdivision.SelectCageObjectData
-
Clears the currently present objects and adds new objects.
- clearAttributeForAllObjects(RoutingAttributeIdentifierType, String) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The attribute value clear method for all objects
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- clearAttributeForObject(NXObject, RoutingAttributeIdentifierType, String) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The object attribute value clear method
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- clearBoundaryToAttachedBoundaryMap() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
Clear the map of boundary to attached boundary.
- clearCache() - Method in interface nxopen.cae.GRMSearch
-
Clear the cache of searched CAE objects such that a subsequent call
to "FindCachedReferencers" will return nothing.
- clearCheck(ExamineGeometry.Check) - Method in interface nxopen.geometricanalysis.ExamineGeometry
-
Clear or unset a specified type of check
License requirements: None.
- clearCheckerNodes() - Method in interface nxopen.validate.Validator
-
Clears checker nodes
License requirements: ug_checkmate ("UG Check Mate")
.
- clearClipboard() - Method in interface nxopen.ame.AMEManager
-
Clears clipboard
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- clearCompileUnitIndexCountAndStatementIndexCount() - Method in interface nxopen.ame.PlcMethodBuilder
-
Clear the number of statments and networks which are saved to creating a method
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- clearConcurrent() - Method in interface nxopen.routing.DesignRuleManager
-
Remove all objects from the concurrent check list
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- clearContents() - Method in interface nxopen.openxml.TableCellData
-
Removes all contents data
License requirements: None.
- clearContext() - Method in interface nxopen.uf.UFHelp
-
- clearCurrentSearchResultsPageResults() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
ClearCurrentSearchResultsPageResults
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- clearDeleteList() - Method in interface nxopen.Update
-
Clears the contents of the global delete list.
- clearElements() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Clear elements .
- clearErrorList() - Method in interface nxopen.Update
-
Clears the update error list.
- clearFaceSets() - Method in interface nxopen.weld.WeldPointBuilder
-
The clear for all existed facesets
License requirements: ugweld ("UG WELD")
.
- clearFeatureTypes() - Method in interface nxopen.features.shipdesign.FeaturesBatchOperationBuilder
-
Clear feature types
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- clearFittingPoints() - Method in interface nxopen.tooling.CoolingFittingData
-
Clear cooling fitting points from the fitting data.
- clearFormat() - Method in interface nxopen.diagramming.FormattedStringBuilder
-
Clears the format and related referenced attributes of this builder.
- clearFormTbl(Tag) - Method in interface nxopen.uf.UFSmd
-
- clearGeometryOfMap(TaggedObject) - Method in interface nxopen.cae.ManualMorphBuilder
-
Removes all the selected geometry from the manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.
- clearGlobalSelectionList() - Method in interface nxopen.Selection
-
Clears the Global Selection list
License requirements: None.
- clearHarnessData() - Method in interface nxopen.routing.electrical.PathArrangementBuilder
-
Clears the builder data associated with stored harness, namely the ReferencePort and
the HarnessOccurrence, along with internal data.
- clearHistoryList(UFVariant) - Method in interface nxopen.uf.UFPart
-
- clearHoleData() - Method in interface nxopen.tooling.RemoveHolesBuilder
-
Clear all the hole data that was input to the builder.
- clearHoleFills() - Method in interface nxopen.facet.FillHoleBuilder
-
Cleans up local meshes associated with each fill.
- clearHoles() - Method in interface nxopen.facet.FillHoleBuilder
-
Removes all holes, deletes associated hole polylines.
- clearIndex(int) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.annotations.LeaderDataList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.assemblies.PartitionList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.BodyList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.BoundarySetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.CAMFeatureList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.CustomLoopSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.CutVolumeList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.GeometrySetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.HoleBossSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.LaserControlPointList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.SplitterList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.ThreadedBossSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.UdeList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.cam.WireGuideList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.DateItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.diagramming.PortBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.die.DieBooleanBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.die.DieLimitsBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.die.DieLocationBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.die.PierceItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.ExpressionCollectorSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.ExpressionSectionSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.FeatureList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.RegionListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.fields.PathObjectsList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.SelectionListList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.ListCreatorList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.ModelingViewList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.motion.ConfigurationParameterList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.motion.InputPortAssociationList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.motion.OutputPortAssociationList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.motion.PortVariableList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.motion.SegmentBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.motion.SignalChartListItemList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.NXObjectList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.ObjectList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.PlaneList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.PointList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.RegionPointList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.routing.RunItemsBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.ScCollectorList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.SectionList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.sim.KinematicChainList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.TaggedObjectList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.weld.JointItemBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Deletes the item at the index specified.
- clearIndex(int) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Deletes the item at the index specified.
- clearLayup() - Method in interface nxopen.cae.Laminate
-
Removes all the ply groups and plies from the laminate physical
License requirements: nx_lam_composites ("Laminate Composites")
.
- clearLayup() - Method in interface nxopen.cae.LaminateGlobalLayup
-
Removes all the ply groups and plies from the global layup
License requirements: nx_lam_composites ("Laminate Composites")
.
- clearList(int) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Clear the index list.
- clearLoadedUnits() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
ClearLoadedUnits
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- clearMarking(NXObject) - Method in interface nxopen.weld.ConnectionFinderBuilder
-
Unmarks (removes save or delete mark) the weld feature from processing.
- clearNetwork() - Method in interface nxopen.positioning.Positioner
-
Removes the
Network
of the positioner.
- clearNodesOfMap(TaggedObject) - Method in interface nxopen.cae.ManualMorphBuilder
-
Removes all the selected nodes from the manual map
License requirements: nx_masterfem ("Finite Element Modeling")
.
- clearPartNodes() - Method in interface nxopen.validate.Validator
-
Clears part nodes
License requirements: None.
- clearPlotLayout() - Method in interface nxopen.PlotBuilder
-
Clear Plot from Layout.
- clearPlotLayout() - Method in interface nxopen.uf.UFPlot
-
- clearPreCreatedBoundedPlaneAndEnlargedSurface(int) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Clear the pre-created bounded plane and enlarged surface if no longer needed.
- clearPreCreatedExtrudeAndSweptSurface(int) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Clear the pre-created extrude and swept surfaces for preview if no longer needed.
- clearProductSelection() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
The product selection clear function
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- clearReferencesToReuse() - Method in interface nxopen.features.MirrorBuilder
-
Clears all the existing references to reuse so that new references can be added
License requirements: solid_modeling ("SOLIDS MODELING")
.
- clearReferencesToReuse() - Method in interface nxopen.features.PatternFeatureBuilder
-
Clears all the existing references to reuse so that new references can be added
License requirements: solid_modeling ("SOLIDS MODELING")
.
- clearRegions() - Method in interface nxopen.geometricutilities.BooleanRegionSelect
-
Clears all preview regions and the current region trackers
License requirements: solid_modeling ("SOLIDS MODELING")
.
- clearReportObjects() - Method in interface nxopen.visualreporting.VisualReportExplorer
-
Remove all objects from the visual report.
- clearResultObjects() - Method in interface nxopen.validate.Parser
-
Clears result objects
License requirements: None.
- clearSearchByProductSelection() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
The product selection clear function
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- clearSecondaryComponentList() - Method in interface nxopen.drawings.DraftingComponentSelectionBuilder
-
Clears the secondary component list.
- clearSelectedUnits() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
ClearSelectedUnits
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- clearSplitPoints() - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
-
Clear split face point.
- clearTablePropertyOverride(String) - Method in interface nxopen.BasePropertyTable
-
Clear property override flag.
- clearTemplateItems() - Method in interface nxopen.report.Report
-
Clears all template items in
Report
.
- clearThePaintPath() - Method in interface nxopen.facet.PaintBrushBuilder
-
Clears the paint path
License requirements: None.
- clearUnitsToUnassociate() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
ClearUnitsToUnassociate
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- clearUnselectedUnits() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
ClearUnselectedUnits
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- clearUserDefinedObjectStatus() - Method in interface nxopen.userdefinedobjects.UserDefinedObject
-
Clears the out of data indicator (status) of this UDO
License requirements: None.
- clearValidationFailures() - Method in interface nxopen.pdm.SmartSaveBuilder
-
Clears operation failures if any
License requirements: None.
- clearValues() - Method in interface nxopen.routing.EditCharacteristicsBuilder
-
Clear the characteristic values of the selected objects.
- clearViolationOnObject(NXObject) - Method in interface nxopen.routing.DesignRule
-
- clearWarnings() - Method in interface nxopen.pdm.PartOperationBuilder
-
Executes method ClearWarningCodeToLogicalObjectsSetMap() which clears m_warningCodeToLogicalObjectsSetMap
License requirements: None.
- CLI - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.SliceFormatOption
-
Saves slices as polygons saved in common layer interface format
- clientType() - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
Returns the external signal client type.
- CLIFF - Static variable in class nxopen.features.DeleteFaceBuilder.FaceEdgeBlendPreferenceOptions
-
Delete as cliff blend.
- cliffEdge - Variable in class nxopen.uf.UFModl.BlendEdge
-
- cliffEdges() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the forced cliff edges for edge blend
License requirements: None.
- cliffOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendData
-
- cliffOverflow - Variable in class nxopen.uf.UFModl.EdgeBlendMultData
-
- cliffProjectOntoSecondWall() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the cliff projection option for face blend
License requirements: None.
- CLIMB - Static variable in class nxopen.cam.AreaMillingContainment.CutDirectionTypes
-
Climb
- CLIMB - Static variable in class nxopen.cam.CutDirection.Types
-
Climb Cut
- CLIMB - Static variable in class nxopen.cam.CylinderMillingCutParameters.CutDirectionTypes
-
Climb cut
- CLIMB - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirType
-
climb
- CLIMB - Static variable in class nxopen.cam.FeatureMillingCutParameters.CuttingDirectionTypes
-
Climb cut
- CLIMB - Static variable in class nxopen.cam.FlowCutSteepContainment.CutDirectionTypes
-
Climb
- CLIMB - Static variable in class nxopen.cam.SurfaceContourBuilder.CutDirectionTypes
-
Climb Cut
- CLIMB - Static variable in class nxopen.cam.ThreadMillingCutParameters.CutDirectionTypes
-
Climb cut
- CLINCH - Static variable in class nxopen.uf.UFConstants
-
- CLINCH - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Clinch
- CLINCH - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Clinch
- CLINCH - Static variable in class nxopen.weld.WeldFeatureSetType
-
Clinch
- CLINCH_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- CLINCH_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- CLINCH_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- CLINCH_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- CLINCH_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- CLINCH_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- CLINCH_WELD - Static variable in class nxopen.uf.UFConstants
-
- CLINCH_WELD - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CLINCH_WELD - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CLINCH_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- CLIP - Static variable in class nxopen.cae.SimConditionSequence.OutOfRangeBehavior
-
- CLIP - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
A component not assigned as a
electrical connector.
- ClipboardOperationsManager - Interface in nxopen
-
Used to create importer objects.
- clipboardOperationsManager() - Method in interface nxopen.Part
-
Returns the ClipboardOperations manager for this part .
- clipCoplanarObjects() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the clip coplanar objects
License requirements: None.
- clipCoplanarObjectsForLightweightSectionViews() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the option indicating clip coplanar objects
License requirements: None.
- clipOrdinateDimensionLine() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the clipping of the dimension line to the ordinate origin at the view border
License requirements: None.
- clipOrdinateDimensionLine() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the clipping of the dimension line to the ordinate origin at the view border
License requirements: None.
- CLIPPED - Static variable in class nxopen.cae.Post.LimitDisplay
-
- clipped - Variable in class nxopen.uf.UFView.AskVisibleObjectsData
-
- Clipping() - Constructor for class nxopen.cae.Post.Clipping
-
- Clipping(boolean, boolean, double, Post.ClipSide, Post.ClipPlane, Result.CoordinateSystem) - Constructor for class nxopen.cae.Post.Clipping
-
Constructor for the Clipping object.
- clippingBoxesList() - Method in interface nxopen.display.PointCloudBuilder
-
- clippingEndPoint() - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder
-
Returns the end point of the clipping box diagonal
License requirements: None.
- ClippingParameters - Interface in nxopen.cae
-
This class is worked as a packet of information that can be used to set the clipping parameters of a
Post
object.
- ClippingParameters.SelectedCoordinateSystemData - Class in nxopen.cae
-
- clippingSide() - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder
-
Returns the clipping side of the defined clipping box
License requirements: None.
- clippingStartPoint() - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilder
-
Returns the start point of the clipping box diagonal.
- clipType() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the clip type
License requirements: None.
- clipValue - Variable in class nxopen.cae.Post.Clipping
-
- clipViewBoundary() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the clip boundary toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
- clipWireframeObjects() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the clip wireframe objects
License requirements: None.
- clipWireframeObjects() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the option indicating clip wireframe objects
License requirements: None.
- clispec - Variable in class nxopen.uf.UFUgmgr.PartFileObject
-
- clockIncrementObject() - Method in interface nxopen.routing.Port
-
Returns the clock angle increment expression of a
Port
, i.e. an expression
representing the minimum angle for clocking the
Port
.
- clockInstance(Tag, String, String) - Method in interface nxopen.uf.UFModlGeneral
-
- ClockPartBuilder - Interface in nxopen.routing
-
- clockType() - Method in interface nxopen.geometricutilities.PatternClocking
-
- clockType() - Method in interface nxopen.geometricutilities.PatternClockingBuilder
-
Returns the clocking enum to determine if linear or angular clocking
License requirements: None.
- CLOCKWISE - Static variable in class nxopen.cam.CamPathDir
-
- CLOCKWISE - Static variable in class nxopen.cam.GuidingCurvesCutDir.Option
-
Cut direction is clockwise
- CLOCKWISE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableDirections
-
Rotate table in clockwise direction
- CLOCKWISE - Static variable in class nxopen.cam.WedmCutParameters.CutDirectionTypes
-
clockwise cut direction
- clone() - Method in class nxopen.Enum
-
Throws CloneNotSupportedException
- CLONE - Static variable in class nxopen.uf.UFClone.Action
-
- CLONE_FEM_IDEAL - Static variable in class nxopen.uf.UFClone.CloneRelCae
-
- CLONE_IDEAL - Static variable in class nxopen.uf.UFClone.CloneRelCae
-
- CLONE_MSET_PART - Static variable in class nxopen.tooling.ElectrodeInitializationBuilder.Type
-
- CLONE_NONE - Static variable in class nxopen.uf.UFClone.CloneRelCae
-
- CLONE_OPERATION - Static variable in class nxopen.uf.UFClone.OperationClass
-
- CLONE_SIM_FEM_IDEAL - Static variable in class nxopen.uf.UFClone.CloneRelCae
-
- CLONE_TOP_PART - Static variable in class nxopen.tooling.ElectrodeInitializationBuilder.Type
-
- CLONE_WORKING_PART - Static variable in class nxopen.tooling.ElectrodeInitializationBuilder.Type
-
- cloneAxissearch(DurabilityAxisSearch) - Method in interface nxopen.cae.DurabilityAxisSearchCollection
-
Clones a durability stress axes.
- cloneBc() - Method in interface nxopen.cae.SimBC
-
Clones a BC
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- cloneCalculation(String, MarginCalculation) - Method in interface nxopen.cae.aerostructures.MarginCalculationCollection
-
Makes a copy the calculation and add it to the margin solution, replaces the given name if it is a duplicate
License requirements: nx_masterfem ("Finite Element Modeling")
.
- cloneClass() - Method in interface nxopen.UFSession
-
- cloneConstraint(CfdAutoRefinementConstraint) - Method in interface nxopen.cae.CfdAutoRefinementConstraintCollection
-
Clones an automatic refinement constraint
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- cloneConstraint(CfdContactPreventionConstraint) - Method in interface nxopen.cae.CfdContactPreventionConstraintCollection
-
Clones a contact prevention constraint.
- cloneConstraint(CfdLocalResolutionConstraint) - Method in interface nxopen.cae.CfdLocalResolutionConstraintCollection
-
Clones a local resolution constraint.
- cloneCorrelation() - Method in interface nxopen.cae.CorrelSolution
-
Make a clone of a correl solution.
- clonedProductName() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Returns the name of the cloned product pack used to create a new changeover.
- cloneDynamicEvent(LaminateDynamicEvent) - Method in interface nxopen.cae.LaminateDynamicEventCollection
-
Clones the laminate dynamic event
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- cloneDynamicSim(LaminateDynamicSim) - Method in interface nxopen.cae.LaminateDynamicSimCollection
-
Clones the laminate dynamic sim
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- cloneEvent(DurabilityEvent) - Method in interface nxopen.cae.DurabilityEventCollection
-
Makes a clone of a durability event.
- cloneEvent(RSEvent, String) - Method in interface nxopen.cae.responsesimulation.Solution
-
Clones an event to the solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
- cloneExcitation(DurabilityExcitation) - Method in interface nxopen.cae.DurabilityExcitationCollection
-
Clones a durability excitation.
- cloneExciterConfig(PreTestExciterConfig) - Method in interface nxopen.cae.PreTestExciterConfigCollection
-
Clone a pre-test exciter configuration
License requirements: nx_correl_base ("FE Correlation")
.
- cloneFatigue(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityFatigueCollection
-
Clones a durability event fatigue settings.
- cloneFolder() - Method in interface nxopen.cae.SimLbcFolder
-
Clones a folder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- cloneForFCADDataSet(NXObject, boolean) - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder
-
To allows cloning of data set attched to FCAD object
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- cloneLayoutState(LayoutState, String) - Method in interface nxopen.cae.LayoutStateCollection
-
Clones the specified
LayoutState
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX12.0.0
- cloneLoadCaseSet(LoadCaseSet) - Method in interface nxopen.cae.aerostructures.LoadCaseSetCollection
-
Create a AeroStruct loadcase set.
- cloneLoadProvider() - Method in interface nxopen.cae.DurSpecialistLoadProvider
-
Clone the LoadProvider
License requirements: nx_adv_durability ("NX Advanced Durability")
.
- cloneLocalDefinition() - Method in interface nxopen.cae.DurSpecialistLocalDefinition
-
Clone the LocalDefinition.
- cloneMarginSolution(MarginSolution) - Method in interface nxopen.cae.aerostructures.MarginSolutionCollection
-
Clones a AeroStruct marginsolution.
- cloneMetasolution(DurabilityMetaSolution) - Method in interface nxopen.cae.DurabilityMetaSolutionCollection
-
Clones a durability metasolution.
- cloneMethod() - Method in interface nxopen.tooling.CloneObject
-
Returns the clone method
License requirements: None.
- cloneModelupdate() - Method in interface nxopen.cae.ModelUpdateSolution
-
Make a clone of a model update solution.
- CloneObject - Interface in nxopen.tooling
-
Represents the clone operation in Add Reusable Component Builder.
- cloneObject() - Method in interface nxopen.tooling.CopySolidBuilder
-
Returns the clone client data.
- cloneObject() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Returns the clone client data.
- ClonePart - Interface in nxopen.tooling
-
Represents the part inforamtion to be cloned in Add Reusable Component Builder.
- clonePostReport(LaminatePostReport) - Method in interface nxopen.cae.LaminatePostReportCollection
-
Clones the laminate post report
License requirements: nx_lam_composites ("Laminate Composites")
.
- clonePretest(PreTestSolution) - Method in interface nxopen.cae.PreTestSolutionCollection
-
Clone a pre-test
License requirements: nx_correl_base ("FE Correlation")
.
- cloneRandomFatigue(DurabilityRandomFatigue) - Method in interface nxopen.cae.DurabilityRandomFatigueCollection
-
Clones a durability event fatigue settings.
- cloneReport(LaminateGraphicalReport) - Method in interface nxopen.cae.LaminateGraphicalReportCollection
-
Clone a laminate graphical post report
License requirements: nx_lam_composites ("Laminate Composites")
.
- cloneReport(LaminateQuickReport) - Method in interface nxopen.cae.LaminateQuickReportCollection
-
Clone a laminate quick post report
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- cloneReport(LaminateSpreadsheetReport) - Method in interface nxopen.cae.LaminateSpreadsheetReportCollection
-
Clone a laminate spreadsheet post report
License requirements: nx_lam_composites ("Laminate Composites")
.
- cloneScenario(Tag, String, String) - Method in interface nxopen.uf.UFSf
-
- cloneSection(BeamSection) - Method in interface nxopen.cae.BeamSectionCollection
-
Creates a copy of a beam cross section
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- cloneSection(boolean, Section) - Method in interface nxopen.features.AOCSBuilder
-
Clone section.
- cloneSection() - Method in interface nxopen.Section
-
Clone section.
- cloneSensor(Sensor, String) - Method in interface nxopen.cae.responsesimulation.Solution
-
Clones a sensor to the solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
- cloneSensorConfig(PreTestSensorConfig) - Method in interface nxopen.cae.PreTestSensorConfigCollection
-
Clone a pre-test sensor configuration
License requirements: nx_correl_base ("FE Correlation")
.
- cloneSimulation(NXObject, String) - Method in interface nxopen.motion.MotionSession
-
Clones the Simulation.
- cloneSolution(CorrelSolution, String) - Method in interface nxopen.cae.CorrelSolutionCollection
-
Clones a correl meta solution
License requirements: None.
- cloneSolution() - Method in interface nxopen.cae.DurSpecialistSolution
-
Clone the Solution.
- cloneSolution(TBSOptimizationSolution, boolean) - Method in interface nxopen.cae.optimization.TBSOptimizationSolutionCollection
-
Clones an optimization solution and the associated result file optional
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
.
- cloneSolution(Solution, String) - Method in interface nxopen.cae.responsesimulation.SolutionCollection
-
Clones a response analysis meta solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
- cloneSolution(SimSolution, String) - Method in interface nxopen.cae.SimSimulation
-
Clone the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- cloneSolveoptions(DurabilitySolveOptions) - Method in interface nxopen.cae.DurabilitySolveOptionsCollection
-
Clones a durability event override.
- cloneStep(String) - Method in interface nxopen.cae.SimSolutionStep
-
Clone the solution step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- cloneStrainGage(StrainGage, String) - Method in interface nxopen.cae.responsesimulation.Solution
-
Clones a strain gage to the solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
- cloneStrength(DurabilityStrength) - Method in interface nxopen.cae.DurabilityStrengthCollection
-
Clones a durability event strength settings.
- CloneUnitDesignBuilder - Interface in nxopen.tooldesigner
-
A class that used for clone unit design
To create a new instance of this class, use nxopen.tooldesigner.ToolDesignerManager#createCloneUnitDesignBuilder
Created in NX12.0.0
- cloneUnitToggle() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
Returns the flip gun direction
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- close(BasePart.CloseWholeTree, BasePart.CloseModified, PartCloseResponses) - Method in interface nxopen.BasePart
-
Closes an open part.
- close() - Method in interface nxopen.blockstyler.BlockDialog.Close
-
Close callback
License requirements: None.
- CLOSE - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.ClosureTypeOptions
-
- close() - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder
-
Closes the boundary by appending start point at the end of boundary definition
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- close() - Method in interface nxopen.issue.IssueBriefcase
-
- close(String) - Method in interface nxopen.issue.IssueContent
-
Closes the issue
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- close() - Method in interface nxopen.ListingWindow
-
Closes the stream to the listing window.
- close() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the die close status value.
- close() - Method in interface nxopen.tooling.SpreadsheetData
-
Close the spreadsheet and exit excel App
License requirements: None.
- close(Tag, int, int) - Method in interface nxopen.uf.UFPart
-
- CLOSE - Static variable in class nxopen.uistyler.FileOperationData.FileOperationType
-
Close file operation
- CLOSE_AND_RELIEF - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.Types
-
- CLOSE_FAILURE - Static variable in class nxopen.RuleManager.InitializationStatusType
-
Close failed
- CLOSE_MODIFIED - Static variable in class nxopen.BasePart.CloseModified
-
Close all modified parts
- CLOSE_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- closeAll(BasePart.CloseModified, PartCloseResponses) - Method in interface nxopen.PartCollection
-
Closes all the parts open in the session.
- closeAll() - Method in interface nxopen.uf.UFPart
-
- closeAmeProject() - Method in interface nxopen.ame.AMEManager
-
Close AME project
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- closeComponents(Component[], BasePart.CloseWholeTree, ComponentAssembly.CloseModified) - Method in interface nxopen.assemblies.ComponentAssembly
-
Given an array of components, close the components.
- closeCset(Tag) - Method in interface nxopen.uf.UFPart
-
- CLOSED - Static variable in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
-
- CLOSED - Static variable in class nxopen.cam.BoundarySet.BoundaryTypes
-
close boundary
- CLOSED - Static variable in class nxopen.diagramming.ArrowStyleType
-
Closed
- CLOSED - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.ArrowStyleType
-
Closed
- CLOSED - Static variable in class nxopen.drawings.ArrowStyleType
-
Closed
- CLOSED - Static variable in class nxopen.drawings.SectionLineStyleBuilder.ArrowheadStyleType
-
Deprecated.
- CLOSED - Static variable in class nxopen.drawings.ViewProjectedArrowSettingsBuilder.DimensionsStyleType
-
- CLOSED - Static variable in class nxopen.drawings.ViewSectionLineBuilder.StyleType
-
- CLOSED - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndType
-
Periodic Bend Edge
- CLOSED - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.TreatmentTypeOptions
-
Bend and Webs will be closed
- CLOSED - Static variable in class nxopen.features.sheetmetal.EditCornerBuilder.BendClosureTypeOptions
-
- CLOSED - Static variable in class nxopen.features.sheetmetal.EditCornerBuilder.PlateClosureTypeOptions
-
- CLOSED - Static variable in class nxopen.features.sheetmetal.MiterOptions.ClosedCornerTypeOptions
-
corner is closed completely
- CLOSED - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.TreatmentTypeOptions
-
- closed() - Method in interface nxopen.features.SpineCurveBuilder
-
Returns the flag indicating if a closed curve should be created if possible.
- closed() - Method in interface nxopen.Polyline
-
Returns the flag indicating if the polyline is closed
License requirements: None.
- CLOSED - Static variable in class nxopen.preferences.RoutingLogical.FlowArrowEnumType
-
Closed arrow head on flow arrow.
- closed() - Method in interface nxopen.SketchEllipseBuilder
-
Returns the closed flag
License requirements: None.
- closed - Variable in class nxopen.uf.UFCurve.LineArc
-
- CLOSED_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- CLOSED_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Closed arrowhead type
- CLOSED_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- CLOSED_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- CLOSED_ARROWHEAD - Static variable in class nxopen.uf.UFDraw.ArwHeadCntl
-
- CLOSED_CURVE_IN_LIST - Static variable in class nxopen.uf.UFConstants
-
- CLOSED_CURVES - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType
-
Close curves will be used to create scraps
- CLOSED_DOUBLE_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- CLOSED_DOUBLE_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Closed double arrowhead type
- CLOSED_DOUBLE_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- CLOSED_DOUBLE_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- CLOSED_DOUBLE_SOLID_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- CLOSED_DOUBLE_SOLID_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Closed double solid arrowhead type
- CLOSED_DOUBLE_SOLID_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- CLOSED_DOUBLE_SOLID_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- CLOSED_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
- CLOSED_LOOP - Static variable in class nxopen.cae.MeshFromBoundaryBuilder.LoopOption
-
closed loop
- CLOSED_LOOP - Static variable in class nxopen.motion.SignalChartBuilder.Type
-
Closed loop
- CLOSED_LOOP_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
- CLOSED_SOLID - Static variable in class nxopen.diagramming.ArrowStyleType
-
Close Solid
- CLOSED_SOLID - Static variable in class nxopen.diagramming.DiagrammingArrowtype
-
Setting the arrow type closed solid arrow
- CLOSED_SOLID - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.ArrowStyleType
-
Close Solid
- CLOSED_SOLID - Static variable in class nxopen.drawings.ArrowStyleType
-
Close Solid
- CLOSED_SOLID_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- CLOSED_SOLID_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Closed solid arrowhead type
- CLOSED_SOLID_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- CLOSED_SOLID_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- CLOSED_SURFACE_NOT_SUPPORTED - Static variable in class nxopen.uf.UFConstants
-
- ClosedCorner - Interface in nxopen.features
-
Represents a ClosedCorner feature
To create or edit an instance of this class, use
ClosedCornerBuilder
Created in NX5.0.0
- ClosedCornerBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Closed corner feature builder.
- ClosedCornerBuilder.ClosureTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents Corner Closure type
- ClosedCornerBuilder.FacePairData - Class in nxopen.features.sheetmetal
-
- ClosedCornerBuilder.OriginTypes - Class in nxopen.features.sheetmetal
-
This enum represents Origin type
- ClosedCornerBuilder.TreatmentTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents Corner treatment type
- ClosedCornerBuilder.Types - Class in nxopen.features.sheetmetal
-
This enum represents the feature types.
- closedCornerGap() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the corner gap used for a contour flange corner in case of a closed corner condition.
- closedCornerType() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the closed corner option type.
- closedCornerVAngle1() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the v cutout angle1 expression of the closed corner.
- closedCornerVAngle2() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the v cutout angle2 expression of the closed corner.
- closedInV() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the closed in V.
- closedLoopSelection() - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
Returns the selected element edges
License requirements: None.
- closedSignalList() - Method in interface nxopen.motion.SignalChartBuilder
-
Returns the closed siganl list
License requirements: nx_motion_motor ("NX Motion Motor")
.
- closedStartOrientation() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the closed start orientation of the draw die punch casting.
- closedVolumeToggle() - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
Returns the closed volume option
License requirements: None.
- closeFile(boolean) - Method in interface nxopen.SpreadsheetExternal
-
Closes an excel file with an option to save the file before close.
- closeFiles(File[]) - Method in interface nxopen.markup.MarkupFileCollection
-
Closes a
File
License requirements: None.
- closeGap - Variable in class nxopen.uf.UFModl.WrapAssem
-
- closeGap - Variable in class nxopen.uf.UFModl.WrapGeom
-
- closeGaps() - Method in interface nxopen.features.WrapGeometryBuilder
-
Returns the Method used to close the gaps after offset of the wrap
License requirements: None.
- closeGaps() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Returns the Method used to close the gaps after offset of the wrap
License requirements: None.
- closeListingWindow() - Method in interface nxopen.uf.UFUi
-
- closePart(NXObject, BasePart.CloseWholeTree, BasePart.CloseModified) - Method in interface nxopen.tooling.ToolingSession
-
Close an existing part
License requirements: None.
- closePasswordSafe() - Method in interface nxopen.PartCollection
-
This method is for closing the currently open password safe.
- closePoint1 - Variable in class nxopen.Measurement.DisplayMinimumDistanceData
-
Close point on first object
- closePoint1 - Variable in class nxopen.Measurement.MinimumDistanceData
-
Close point on first object
- closePoint2 - Variable in class nxopen.Measurement.DisplayMinimumDistanceData
-
Close point on second object
- closePoint2 - Variable in class nxopen.Measurement.MinimumDistanceData
-
Close point on second object
- closeProfileRule() - Method in interface nxopen.geometricutilities.SmartVolumeProfileBuilder
-
Returns the option defines how to extend the open profile to form a proper intersection with the target body.
- CloseRangeBlindVolumeListItemBuilder - Interface in nxopen.features.vehicledesign
-
Represents the builder to create blind volume list item used for close range visibility.
- CloseRangeCameraListItemBuilder - Interface in nxopen.features.vehicledesign
-
Represents the builder to create camera list item used for close range visibility.
- CloseRangeCameraListItemBuilder.Types - Class in nxopen.features.vehicledesign
-
This enum represents the camera definition options to define the close range visibility.
- CloseRangeCameraListItemBuilderList - Interface in nxopen.features.vehicledesign
-
Represents a list of objects.
- CloseRangeDemoCylinderListItemBuilder - Interface in nxopen.features.vehicledesign
-
Represents the builder to create demo cylinder list item used for close range visibility.
- CloseRangeDemoCylinderListItemBuilder.ValidateTypes - Class in nxopen.features.vehicledesign
-
This enum represents the simple or detailed checking options to validate demo cylinders visibility.
- CloseRangeDemoCylinderListItemBuilderList - Interface in nxopen.features.vehicledesign
-
Represents a list of objects.
- CloseRangeVisibility - Interface in nxopen.features.vehicledesign
-
Represents a close range visibility feature
To create or edit an instance of this class, use
CloseRangeVisibilityBuilder
Created in NX8.5.0
- CloseRangeVisibilityBuilder - Interface in nxopen.features.vehicledesign
-
The builder to create close range visibility feature.
- CloseRangeVisibilityBuilder.EyePointOffsetTypes - Class in nxopen.features.vehicledesign
-
This enum represents the eye position offset options.
- CloseRangeVisibilityBuilder.EyePointTypes - Class in nxopen.features.vehicledesign
-
This enum represents the binocular or monocular eye position definition options.
- CloseRangeVisibilityBuilder.PathPositionTypes - Class in nxopen.features.vehicledesign
-
This enum represents the cylinder path position display options.
- CloseRangeVisibilityBuilder.PositionMethods - Class in nxopen.features.vehicledesign
-
This enum represents the cylinder position method options.
- CloseRangeVisibilityBuilder.PositionPaths - Class in nxopen.features.vehicledesign
-
This enum represents the cylinder position path options.
- CloseRangeVisibilityBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
-
This enum represents the standard or user defined requirement options.
- closeScenario() - Method in interface nxopen.uf.UFSf
-
- CLOSEST - Static variable in class nxopen.cam.fbm.FeatureGeometry.SortOrder
-
Sort order: Closet
- CLOSEST - Static variable in class nxopen.cam.HoleBossGeom.OptimizationTypes
-
Optimization: Closet
- CLOSEST - Static variable in class nxopen.cam.RoughTurningBuilder.ReversalModeTypes
-
Reversal mode: Closest
- CLOSEST - Static variable in class nxopen.SpreadsheetManager.LookupMode
-
Returns the closest cell
- closestImprintOption() - Method in interface nxopen.cae.ImprintBuilder
-
Returns the closest imprint Option state
License requirements: None.
- closeStlFile(UFVariant) - Method in interface nxopen.uf.UFStd
-
- closestorthogonalpoint - Variable in class nxopen.Measurement.MinimumOrthogonalDistanceData
-
Closest orthogonal point on face or edge
- closestPoint - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
closest point on curve in Root Part Coordinates
- closestPoint - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
closest point on face in Root Part Coordinates
- closestPoint - Variable in class nxopen.uf.UFEval.EvaluateClosestPointData
-
- closestPoint - Variable in class nxopen.uf.UFSf.AskClosestPointData
-
- closestPointInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
closest point on curve in Work Part Coordinates
- closestPointInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeFace
-
closest point in Work Part Coordinates
- CLOSET_TO_TARGET - Static variable in class nxopen.cae.EdgeFaceImprintBuilder.ProjectionDirectionType
-
- closeTestOutput() - Method in interface nxopen.BaseSession
-
- closeWindow(int) - Method in interface nxopen.cae.xyplot.WindowManager
-
Closes the window of specified device index.
- closeWindow() - Method in interface nxopen.ListingWindow
-
Closes the listing window actually from the UI.
- CLOSING - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessType
-
The process of die travels from initial position to binder.
- CLOSURE_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
-
The process action for binder is closure with other draw components.
- CLOSURE_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
-
The process action for die is closure with other draw components.
- CLOSURE_WITH - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
-
The process action for punch is closure with other draw components.
- closureType() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the closure type
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- CLOTHED - Static variable in class nxopen.HumanData.AppearanceType
-
- CLOUD_OF_POINTS - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.SurfaceType
-
Cloud of points
- clrDist - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- clrDistBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the Clearance Distance builder (inheritable double)
License requirements: None.
- clrIndex - Variable in class nxopen.uf.UFCgm.Color
-
- clrName - Variable in class nxopen.uf.UFCgm.Color
-
- clrName - Variable in class nxopen.uf.UFDisp.AskColorData
-
- CLRNR_NOT_PARALLEL_TAXIS - Static variable in class nxopen.cam.CAMObject.Attr
-
- CLRPLANE_DEFINE_AND_ACTIVE - Static variable in class nxopen.uf.UFParam.ClrplaneStatus
-
- CLRPLANE_DEFINE_AND_INACTIVE - Static variable in class nxopen.uf.UFParam.ClrplaneStatus
-
- CLRPLANE_UNDEFINED - Static variable in class nxopen.uf.UFParam.ClrplaneStatus
-
- CLRPLANE_USAGE_AT_END_MIN_CLEARANCE_AT_START - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
-
- CLRPLANE_USAGE_AT_OPERATION_END_ONLY - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
-
- CLRPLANE_USAGE_AT_OPERATION_START_AND_END - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
-
- CLRPLANE_USAGE_AT_OPERATION_START_ONLY - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
-
- CLRPLANE_USAGE_AT_START_MIN_CLEARANCE_AT_END - Static variable in class nxopen.uf.UFParam.ClrplaneUsage
-
- clrPoint1 - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- clrPoint2 - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- clrSetName() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the clearance set name
License requirements: None.
- clrVals - Variable in class nxopen.uf.UFCgm.Color
-
- clrValues - Variable in class nxopen.uf.UFDisp.AskColorData
-
- clrVertBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the clearance vertical builder (inheritable double)
License requirements: None.
- clrZone() - Method in interface nxopen.tooling.ValidCheckBuilder
-
Returns the clearance zone
License requirements: None.
- clrZone - Variable in class nxopen.uf.UFClear.AskObjectClearZoneData
-
- clrZone - Variable in class nxopen.uf.UFClear.AskPairClearZoneData
-
- clsf() - Method in interface nxopen.UFSession
-
- CLSF_DECIMAL_PLACE - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- clsfData() - Method in interface nxopen.PlotBuilder
-
Returns the option to plot clsf data.
- clsfDecimalPlace - Variable in class nxopen.uf.UFCam.Preferences
-
- clsfDecimals() - Method in interface nxopen.cam.Preferences
-
Returns the clsf_decimals
License requirements: None.
- clsfForceLoadTurret() - Method in interface nxopen.cam.Preferences
-
Returns the force load turret
License requirements: None.
- clsfReplayAdvanced - Variable in class nxopen.uf.UFCam.Preferences
-
- clsfReplayRefresh - Variable in class nxopen.uf.UFCam.Preferences
-
- clsfReplayVericut - Variable in class nxopen.uf.UFCam.Preferences
-
- clsfType - Variable in class nxopen.uf.UFCam.Preferences
-
- CLUSTER - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderType
-
Network Cluster
- cluster - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
-
- CLV_RANGE_AUTO_GENERATE - Static variable in class nxopen.uf.UFParam.ClvRangeType
-
- CLV_RANGE_SINGLE - Static variable in class nxopen.uf.UFParam.ClvRangeType
-
- CLV_RANGE_USER_DEFINED - Static variable in class nxopen.uf.UFParam.ClvRangeType
-
- CLW - Static variable in class nxopen.cam.LaserCutDirection.Types
-
CLW
- CLW - Static variable in class nxopen.cam.MillingToolBuilder.ToolDirectionTypes
-
CLW
- CM - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepLengthUnitType
-
Length unit of centimeter
- CM - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
CM: cm (centi newton)
- CM - Static variable in class nxopen.HumanData.StatureUnitType
-
Indicate cm for stature
- CMASS - Static variable in class nxopen.uf.UFSf.ElementType
-
- CMETER - Static variable in class nxopen.uf.UFModl.Units
-
- CMM_DMI - Static variable in class nxopen.pdm.FileManagement.FileType
-
- cmmInspectionGroupCollection() - Method in interface nxopen.cam.InspectionSetup
-
Returns the InspectionGroupCollection instance belonging to this setup .
- cmmInspectionMoveCollection() - Method in interface nxopen.cam.InspectionOperation
-
Represents the Inspection Move Collection .
- cmmInspectionMoveSubopCollection() - Method in interface nxopen.cam.InspectionMoveSubop
-
Represents the Inspection Move Collection .
- cmmInspectionOperationCollection() - Method in interface nxopen.cam.InspectionSetup
-
Returns the InspectionOperationCollection instance belonging to this setup .
- cmminspectionTrackPointCollection() - Method in interface nxopen.cam.InspectionTool
-
Returns the CMMInspectionTrackPointCollection .
- CMOD_DATA_ERROR - Static variable in class nxopen.uf.UFConstants
-
- CMP_COLOR_WIDTH - Static variable in class nxopen.uf.UFPlot.CmpColorWidth
-
- CMP_DIFF_FOUND - Static variable in class nxopen.uf.UFPlot.DiffCmpStatus
-
- CMP_NO_COLOR_WIDTH - Static variable in class nxopen.uf.UFPlot.CmpColorWidth
-
- CMP_NO_DIFF_FOUND - Static variable in class nxopen.uf.UFPlot.DiffCmpStatus
-
- CNC_TEMPLATE1 - Static variable in class nxopen.tooling.EWDraftingBuilder.CNCTemplateOption
-
template1
- CNC_TEMPLATE2 - Static variable in class nxopen.tooling.EWDraftingBuilder.CNCTemplateOption
-
template2
- cncOption() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the option to create cnc sheet type drafting or not.
- cncTemplate() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the template of cnc sheet type to create drafting.
- CO_ALIGN - Static variable in class nxopen.positioning.Constraint.Alignment
-
Directions are the same
- CO_SIMULATION - Static variable in class nxopen.motion.MechatronicsBuilder.SolverIntegrationType
-
- COARSE - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmDispQuality
-
Coarse
- COARSE - Static variable in class nxopen.cam.Preferences.AnimationAccuracyTypes
-
Coarse
- COARSE - Static variable in class nxopen.cam.SimulationOptionsBuilder.Accuracy
-
use coarse accuracy
- COARSE - Static variable in class nxopen.die.CompensateRoughDataBuilder.ApproximationType
-
Perform a coarse approximation.
- COARSE - Static variable in class nxopen.display.FacetSettingsBuilder.AdvVisToleranceSetting
-
- COARSE - Static variable in class nxopen.display.FacetSettingsBuilder.ShadedToleranceSetting
-
- COARSE - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ResolutionOption
-
view display quality Coarse
- COARSE - Static variable in class nxopen.facet.STLImportBuilder.AngularToleranceTypes
-
- COARSE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DispResolutionEnum
-
- COARSE - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Resolutions
-
Coarse
- COARSE - Static variable in class nxopen.ListCreator.ResolutionType
-
Coarse
- COARSE - Static variable in class nxopen.preferences.GeneralToleranceOption
-
Coarse
- COARSE - Static variable in class nxopen.preferences.GeneralViewQualityOption
-
Coarse
- COARSE - Static variable in class nxopen.preferences.PartModeling.GridResolutionType
-
Coarse grid resolution
- COARSE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
-
Coarse
- COARSE - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
-
For Coarse: Facet Edge Tolerance is 0.01, Facet
Chord Tolerance is 0.01, and Angular Tolerance is 0.0
- COARSE - Static variable in class nxopen.preferences.SessionModeling.PreviewResolutionType
-
- COARSE - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.PlotQualityType
-
- COARSE - Static variable in class nxopen.preferences.ShadingToleranceOption
-
Coarse
- COARSE - Static variable in class nxopen.STLImporter.AngularToleranceType
-
Import with coarse angular tolerance.
- COARSE - Static variable in class nxopen.tooling.DieEngDefineProductOrientationBuilder.FacetQualityOption
-
- COARSE - Static variable in class nxopen.VRMLImporter.AngularToleranceType
-
Import with coarse angular tolerance.
- coarsePrecision() - Method in interface nxopen.sim.KinematicAxisBuilder
-
Returns the coarse precision.
- COATINGS - Static variable in class nxopen.display.IrayPlusMaterialEditorBuilder.LayerType
-
Coating layers
- COAX_HOLE_COUNT - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- Coaxial - Interface in nxopen.features
-
Represents a coaxial feature
To create or edit an instance of this class, use
CoaxialBuilder
Created in NX6.0.0
- COAXIAL_LASER - Static variable in class nxopen.cam.Tool.Subtypes
-
Coaxial Laser tool
- CoaxialBuilder - Interface in nxopen.features
-
- coaxialEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether coaxial relation recognition is enabled
License requirements: None.
- COBALT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- code - Variable in class nxopen.cam.CAMSetup.PartMaterialData
-
- code - Variable in class nxopen.cam.FeatureGeomBuilder.MaterialData
-
- code - Variable in class nxopen.cam.ToolBuilder.MaterialData
-
- codecFourcc() - Method in interface nxopen.MovieSettingsBuilder
-
Returns the Codec that is used to create the movie.
- CODESET_ASCII - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_BIG5 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_EUC - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_GB2312 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_ISO88591 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_ISO885911 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_ISO885915 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_ISO88592 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_ISO88594 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_ISO88595 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_ISO88596 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_ISO88597 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_ISO88598 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_KSC5601 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NOT_INITIALIZED - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NOT_SUPPORT - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT1250 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT1251 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT1252 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT1253 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT1254 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT1255 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT1256 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT1257 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT1258 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT852 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT862 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_NT866 - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_SJIS - Static variable in class nxopen.uf.UF.Codeset
-
- CODESET_UTF8 - Static variable in class nxopen.uf.UF.Codeset
-
- coefficient() - Method in interface nxopen.cae.connections.IDiameter
-
Returns the coefficient for formula defined diameter
License requirements: None.
- coefficient - Variable in class nxopen.cae.DofTerm
-
Coefficient.
- COEFFICIENT_PER_LENGTH - Static variable in class nxopen.cae.Result.Quantity
-
- coefficientCSYS() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the coefficient type coordinate system.
- coefficientCurveProfile() - Method in interface nxopen.motion.DamperBuilder
-
Returns the coefficient profile
License requirements: None.
- coefficientCurveProfile() - Method in interface nxopen.motion.SpringBuilder
-
Returns the coefficient profile
License requirements: None.
- coefficientDefinitionMethod() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the DDAM coefficient definition method
License requirements: nx_response_anlys ("NX Response Analysis")
.
- coefficientExpression() - Method in interface nxopen.motion.DamperBuilder
-
Returns the translational coefficient expression
License requirements: None.
- coefficientExpression() - Method in interface nxopen.motion.SpringBuilder
-
Returns the translational coefficient expression
License requirements: None.
- coefficientFile() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the DDAM coefficients definition file.
- coefficientFunction() - Method in interface nxopen.motion.DamperBuilder
-
Returns the function tag.
- coefficientFunction() - Method in interface nxopen.motion.SpringBuilder
-
Returns the function tag.
- COEFFICIENTS - Static variable in class nxopen.features.GeneralConicBuilder.Types
-
- COEFFICIENTS - Static variable in class nxopen.PlaneTypes.MethodType
-
Fixed plane defined by coefficients
- coefficients - Variable in class nxopen.uf.UFCurve.Genconic
-
- coefficientsType() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
Returns the type will be constant or spline
License requirements: None.
- coefficientType() - Method in interface nxopen.motion.DamperBuilder
-
Returns the coefficient type
License requirements: None.
- coefficientType() - Method in interface nxopen.motion.SpringBuilder
-
Returns the coefficient type
License requirements: None.
- COFM_MARKER - Static variable in class nxopen.uf.UFMotion.MarkerType
-
- cofmError - Variable in class nxopen.uf.UFWeight.Properties
-
- cofmState - Variable in class nxopen.uf.UFWeight.Properties
-
- cogfrontXOffset() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the center of gravity front longitudunal offset for this head impact study.
- cogfrontZOffset() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the center of gravity front vertical offset for this head impact study.
- cogrearXOffset() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the center of gravity rear longitudunal offset for this head impact study.
- cogrearZOffset() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the center of gravity rear vertical offset for this head impact study.
- COHESIVE_DAMAGE - Static variable in class nxopen.cae.Result.Quantity
-
- COHESIVE_ELEMENT - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- COHESIVE_NORMAL_SEPARATION - Static variable in class nxopen.cae.Result.Quantity
-
- COHESIVE_SLIP_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- COIN_PUNCH - Static variable in class nxopen.uf.UFModl.PunchType
-
- COINCIDENT - Static variable in class nxopen.DatumConstraint.Type
-
- COINCIDENT - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Coincident constraint
- COINCIDENT - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Coincident constraint
- coincident() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the coincident infer-constraint setting.
- COINCIDENT - Static variable in class nxopen.PlaneTypes.MethodType
-
Plane of object method
- COINCIDENT - Static variable in class nxopen.Sketch.ConstraintType
-
- coincident() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the coincident
License requirements: None.
- COINCIDENT - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- COINCIDENT - Static variable in class nxopen.uf.UFCurve.ConstraintType
-
- COINCIDENT - Static variable in class nxopen.uf.UFModl.DfoConstraintType
-
- COINCIDENT - Static variable in class nxopen.uf.UFSket.ConType
-
- COINCIDENT_FACE_AXIS - Static variable in class nxopen.PlaneTypes.MethodType
-
Though face axis method
- COINCIDENT_PERP_LINEAR - Static variable in class nxopen.PlaneTypes.MethodType
-
Through linear perpendicluar to linear method
- COINCIDENT_POINT - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
Mimimum Distance
- coincidentEdgeCollector() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the cliff edge collector for face blend
License requirements: None.
- coincidentVertex2dComponentEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add coincident vertex 2d component relation recognition for the last curves added to curve collector
License requirements: None.
- coincidentVertexEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add coincident vertex relation recognition for the last curves added to curve collector
License requirements: None.
- coincidentVertexSketchGroupEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add coincident vertex relation recognition for the last curves added to curve collector
License requirements: None.
- col - Variable in class nxopen.uf.UFDraw.TabnotCell
-
- colinearThreshold() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the colinear decimation threshold - obsolete: always using surface wrapper default values
License requirements: None.
- COLL - Static variable in class nxopen.cam.LaserControlPoint.ControlPointTypes
-
coll
- COLLABORATIVE_PRODUCT_DEVELOPMENT_DE - Static variable in class nxopen.Session.ProjectAssignmentObjectType
-
Collaborative Product Development -Design Element
- CollaborativeContentManager - Interface in nxopen
-
Represents the manager for the various collaborative design contents and this class is usable only when NX is running in managed mode.
- collaborativeContentManager() - Method in interface nxopen.Session
-
- CollaborativeContentType - Class in nxopen.assemblies
-
Represents the collaborative content type corresponding to this component
- collaborativeContentType() - Method in interface nxopen.assemblies.Component
-
Returns the collaborative content type of this component.
- collaborativeDesign() - Method in interface nxopen.assemblies.PartitionScheme
-
Returns
the owning collaborative design.
- collaborativeDesign() - Method in interface nxopen.assemblies.SubsetBuilder
-
- CollaborativeDesign - Interface in nxopen
-
A collaborative design is created in Teamcenter.
- collaborativeDesign() - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
Returns the collaborative design
License requirements: None.
- CollaborativeDesignCollection - Interface in nxopen
-
A collection of collaborative designs.
- collaborativeDesigns() - Method in interface nxopen.CollaborativeContentManager
-
- COLLAPSE - Static variable in class nxopen.blockstyler.Node.ExpandOption
-
Use this option to collapse the node.
- COLLAPSE - Static variable in class nxopen.cae.SimBCDisplay.Mode
-
Set a collapsed display mode
- collapseState() - Method in interface nxopen.uistyler.CollapsibleGroup
-
Returns the collapse-state
License requirements: None.
- collapseView() - Method in interface nxopen.uf.UFUiOnt
-
- COLLAPSIBLE_GROUP - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- COLLAPSIBLE_GROUP - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Callapsible Group item
- CollapsibleGroup - Interface in nxopen.uistyler
-
Represents a Collapsible Group for UI Styler .
- COLLAR_PLATE - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Collar Plate type
- COLLAR_PLATE - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- COLLAR_PLATE_TO_HOLE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Check collar plate to hole
- COLLAR_PLATE_TO_SEAM - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
In basic design,check collar plate to seam,In detail design,check collar plate to edge
- CollarPlate - Interface in nxopen.features.shipdesign
-
Represents a collar plate feature.
- CollarPlateBuilder - Interface in nxopen.features.shipdesign
-
- collarPlateCreationApproach() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the approach to be used in creating collar plate.
- COLLECT_INSTANCES - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- collectEjectors(NXObject) - Method in interface nxopen.tooling.EjectorTableData
-
Collects ejectors into ejector table data.
- collectinsidefacetsonly - Variable in class nxopen.BrushFacetsRule.Data
-
the flag indicating collection of inside brush facets only is allowed.
- collectInstances - Variable in class nxopen.uf.UFCam.Preferences
-
- Collection - Interface in nxopen.assemblies.productinterface
-
This class represents the collection of product interface objects
To obtain an instance of this class, refer to
Part
Created in NX5.0.0
- Collection - Interface in nxopen.userdefinedtemplate
-
Represents a collection of user defined template
To obtain an instance of this class, refer to
Part
Created in NX10.0.0
- COLLECTION_PLANE - Static variable in class nxopen.annotations.FeatureControlFrameIndicatorBuilder.FcfIndicatorType
-
- collectionOneObjects() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the selected objects for collection one.
- collectionOneRange() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the range setting for collection one.
- collectionPlaneType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the collection plane indicator enum
License requirements: None.
- collectionSweepabilityCheck(boolean) - Method in interface nxopen.BodyCollection
-
Sweepability check
License requirements: solid_modeling ("SOLIDS MODELING")
.
- collectionTwoObjects() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the selected objects for collection two.
- collectionTwoRange() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the range setting for collection two.
- collector() - Method in interface nxopen.ExpressionCollectorSet
-
Returns the selection
License requirements: None.
- collector - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndSectionValueData
-
The collector for this edge blend chainset
- collector - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndStatusData
-
The collector for this edge blend chainset
- collector - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetData
-
The collector for this edge blend chainset
- collectorId() - Method in interface nxopen.cae.PostMesh
-
Returns the collector id of the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- collectorName() - Method in interface nxopen.cae.ElementCreateBuilder
-
Returns the mesh collector name
License requirements: None.
- collectorName() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the mesh collector name
License requirements: None.
- collectorName() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the mesh collector name
License requirements: None.
- collectorName() - Method in interface nxopen.cae.ElementReflectBuilder
-
Returns the mesh collector name
License requirements: None.
- collectorName() - Method in interface nxopen.cae.ElementRevolveBuilder
-
Returns the mesh collector name
License requirements: None.
- collectorName() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the collector name selection to place the new element collector into
License requirements: None.
- collectorName() - Method in interface nxopen.cae.MeshCollectorBuilder
-
Returns the collector name
License requirements: None.
- collectorName() - Method in interface nxopen.cae.MeshFromBoundaryBuilder
-
Returns the mesh collector name
License requirements: None.
- collectorName() - Method in interface nxopen.cae.SpiderElementBuilder
-
Returns the mesh collector name
License requirements: None.
- collectorNeutralType() - Method in interface nxopen.cae.IMeshCollector
-
Returns the mesh collector neutral type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- collectors - Variable in class nxopen.features.MeshSurfaceBuilder.FaceConstraintCollectorsData
-
Constraints collectors.
- collectorType() - Method in interface nxopen.cae.IMeshCollector
-
Returns the mesh collector type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- collectorUpdated() - Method in interface nxopen.SketchIntersectionCurveBuilder
-
This method needs to be called whenever the number of faces to intersect changes
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- collectSelectedUnits() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder
-
CollectSelectedUnits
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- COLLIMATED_ABSORBED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- COLLIMATED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- COLLIMATED_INCIDENT_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- COLLIMATED_REFLECTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- COLLIMATED_TRANSMITTED_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- collinear() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the collinear infer-constraint setting.
- COLLINEAR - Static variable in class nxopen.Sketch.ConstraintType
-
- collinear() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the collinear
License requirements: None.
- COLLINEAR - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- COLLINEAR - Static variable in class nxopen.uf.UFSket.ConType
-
- collinear2dComponentEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add collinear 2d component relation recognition for the last curves added to curve collector
License requirements: None.
- collinearEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add collinear relation recognition for the last curves added to curve collector
License requirements: None.
- collinearSketchGroupEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add collinear relation recognition for the last curves added to curve collector
License requirements: None.
- collinearTolerance() - Method in interface nxopen.cae.BoltBuilder
-
Returns the option to tune collinear tolerance for a model.
- COLLISION - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsStatusTypes
-
Collision
- COLLISION - Static variable in class nxopen.sim.IsvControlPanelBuilder.DetailType
-
Collision
- COLLISION - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Collision
- COLLISION - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace Collision
- COLLISION_CHECK - Static variable in class nxopen.sim.KinematicSinumerikCaBuilder.PlcUsageTypes
-
Collision Check
- collisionAvoidanceEnum() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the collision avoidance enum
License requirements: None.
- collisionBodies() - Method in interface nxopen.mechatronics.PhysicsManager
-
- CollisionBody - Interface in nxopen.mechatronics
-
Represents the Collision Body class.
- CollisionBodyBuilder - Interface in nxopen.mechatronics
-
- CollisionBodyBuilder.CollisionShapeTypes - Class in nxopen.mechatronics
-
the collide shape types.
- CollisionBodyBuilder.ShapePropertyTypes - Class in nxopen.mechatronics
-
the shape calculation option.
- CollisionBodyCollection - Interface in nxopen.mechatronics
-
Represents a collection of Collision Bodies.
- collisionCheck() - Method in interface nxopen.cam.HoleMachiningBuilder
-
Returns the collision check for cutting
License requirements: None.
- collisionCheck() - Method in interface nxopen.cam.LaserProfileMove
-
Returns the Collision Check
License requirements: None.
- collisionCheck() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the collision check activation
License requirements: None.
- collisionCheck() - Method in interface nxopen.cam.NcmOptimizeGroup
-
Returns the collision check activation
License requirements: None.
- collisionCheck() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the collision check activation
License requirements: None.
- collisionCheck() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the collision check activation
License requirements: None.
- collisionCheckOption() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Returns the collision check method option
License requirements: None.
- collisionClearance() - Method in interface nxopen.cam.CollisionPairBuilder
-
Returns the collision clearance
License requirements: None.
- collisionConfiguration() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Modify the collision by invoking collision configuration dialog
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- CollisionConfigurationBuilder - Interface in nxopen.cam
-
- collisionConfigurationBuilder() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the collision configuration builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- collisionEnable() - Method in interface nxopen.cam.CollisionPairBuilder
-
Returns the collision enable
License requirements: None.
- collisionFactor() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
Returns the collision factor.
- collisionFlag() - Method in interface nxopen.cam.ProbeProtectedParametersBuilder
-
Returns the collision flag
License requirements: None.
- collisionInformation() - Method in interface nxopen.tooling.RunSimulationBuilder
-
List collision changes information in the information window
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- collisionMaterial() - Method in interface nxopen.mechatronics.ChangeMaterialBuilder
-
Returns the material.
- collisionMaterial() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
Returns the material.
- CollisionMaterial - Interface in nxopen.mechatronics
-
Represents the Collision Material class.
- CollisionMaterialBuilder - Interface in nxopen.mechatronics
-
- CollisionMaterialCollection - Interface in nxopen.mechatronics
-
Represents a collection of Collision Material.
- collisionMaterials() - Method in interface nxopen.mechatronics.PhysicsManager
-
- CollisionPairBuilder - Interface in nxopen.cam
-
- CollisionPairBuilder.Filter - Class in nxopen.cam
-
the collision selection filter value
- CollisionPairBuilderList - Interface in nxopen.cam
-
Represents a list of objects.
- collisionPairIndex() - Method in interface nxopen.sim.SinumerikCaExportBuilder
-
Returns the index used when exporting collision pairs to the SPF file
License requirements: None.
- collisionPrecision() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- collisionPrecisionExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Collision Precision Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- collisionProperties() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
Returns the shape option.
- CollisionSensor - Interface in nxopen.mechatronics
-
Represents the Collision Sensor.
- collisionSensor() - Method in interface nxopen.mechatronics.DisplayChangerBuilder
-
Returns the object select.
- collisionSensor() - Method in interface nxopen.mechatronics.ObjectSinkBuilder
-
Returns the object select.
- collisionSensor() - Method in interface nxopen.mechatronics.ObjectTransformerBuilder
-
Returns the object select.
- collisionSensor() - Method in interface nxopen.mechatronics.TransmitterEntryBuilder
-
Returns the detector.
- CollisionSensorBuilder - Interface in nxopen.mechatronics
-
- CollisionSensorBuilder.CollisionShapeTypes - Class in nxopen.mechatronics
-
the Trigger Shape Types.
- CollisionSensorBuilder.ShapePropertiesOption - Class in nxopen.mechatronics
-
the Trigger Shape Option.
- CollisionSensorCollection - Interface in nxopen.mechatronics
-
Represents a collection of Collision Sensor.
- collisionSensors() - Method in interface nxopen.mechatronics.PhysicsManager
-
- collisionShape() - Method in interface nxopen.mechatronics.CollisionBodyBuilder
-
Returns the shape type.
- collisionShape() - Method in interface nxopen.mechatronics.CollisionSensorBuilder
-
Returns the collision shape type.
- CollisionShapeBuilder - Interface in nxopen.mechatronics
-
This is an abstract class, and cannot be created.
- collshape() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the tool shape for collision
License requirements: None.
- COLOR - Static variable in class nxopen.ame.ElectricalAnnotationSettingsBuilder.AnnotationAttrType
-
- color() - Method in interface nxopen.annotations.AutomaticCenterlineBuilder
-
Returns the color
License requirements: None.
- color() - Method in interface nxopen.annotations.CenterlineSettingsBuilder
-
Returns the color of centerline
License requirements: None.
- color() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the color of the Cutting Plane Symbol
License requirements: None.
- color() - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
Returns the color picker
License requirements: None.
- color() - Method in interface nxopen.annotations.HatchBuilder
-
- color() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the color
License requirements: None.
- color() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the color of crosshatch or area fill lines or area fill solid fill color
License requirements: None.
- color() - Method in interface nxopen.annotations.IntersectionSymbolBuilder
-
Returns the color
License requirements: None.
- color - Variable in class nxopen.annotations.LineCfw
-
- color() - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
Returns the color
License requirements: None.
- color() - Method in interface nxopen.annotations.TargetPointBuilder
-
Returns the color
License requirements: None.
- color - Variable in class nxopen.annotations.TextCfw
-
- color() - Method in interface nxopen.cae.LaminatePly
-
Returns the ply color
License requirements: None.
- color() - Method in interface nxopen.cae.MeshCollectorDisplayDefaults
-
Returns the element color.
- color() - Method in interface nxopen.cae.MeshDisplaySettings
-
Returns the element color.
- color - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.EdgeDisplayStyle
-
line color
- color - Variable in class nxopen.cae.Post.Text
-
- color() - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting
-
Returns the line color
License requirements: None.
- color() - Method in interface nxopen.cae.xyplot.ICurveDisplaySettings
-
Returns the line color
License requirements: None.
- color() - Method in interface nxopen.cae.xyplot.ScatterStyleSetting
-
Returns the point color
License requirements: None.
- color() - Method in interface nxopen.cae.xyplot.TextBoxStyleSetting
-
Returns the text box outline color
License requirements: None.
- color() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns the text color
License requirements: None.
- color() - Method in interface nxopen.cae.xyplot.UnknownResultScaleStyle
-
Returns the unknown result color
License requirements: None.
- color - Variable in class nxopen.diagramming.tables.TableBuilder.FillColorData
-
- color - Variable in class nxopen.die.DrawDiePunchSectionBuilder.FormingAttributesData
-
Color of forming faces.
- color - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData
-
Color of hole faces.
- color - Variable in class nxopen.die.HoleChildBuilder.PadAttributesData
-
Color of pad faces.
- color - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData
-
Color of hole faces.
- color - Variable in class nxopen.die.HoleParentBuilder.PadAttributesData
-
Color of pad faces.
- color - Variable in class nxopen.die.KeywayChildBuilder.SlotAttributesData
-
Color of slot faces.
- color - Variable in class nxopen.die.KeywayParentBuilder.SlotAttributesData
-
Color of slot faces.
- color - Variable in class nxopen.die.PadChildBuilder.HoleAttributesData
-
Color of hole faces.
- color - Variable in class nxopen.die.PadChildBuilder.PadAttributesData
-
Color of pad faces.
- color - Variable in class nxopen.die.PadParentBuilder.HoleAttributesData
-
Color of hole faces.
- color - Variable in class nxopen.die.PadParentBuilder.PadAttributesData
-
Color of pad faces.
- color - Variable in class nxopen.die.PierceHoleChildBuilder.HoleAttributesData
-
color of hole faces
- color - Variable in class nxopen.die.PierceHoleParentBuilder.HoleAttributesData
-
color of hole faces
- color - Variable in class nxopen.die.RotorSectionBuilder.RotorAttributesData
-
color of rotor faces
- color - Variable in class nxopen.die.SteelInsertSectionBuilder.FormingAttributesData
-
color of forming faces
- color - Variable in class nxopen.die.ThroatChildBuilder.ExtensionAttributesData
-
Color of extension faces.
- color - Variable in class nxopen.die.ThroatParentBuilder.ExtensionAttributesData
-
Color of extension faces.
- color - Variable in class nxopen.die.WearPlateLocChildBuilder.PadAttributesData
-
color of pad faces
- color - Variable in class nxopen.die.WearPlateLocParentBuilder.PadAttributesData
-
color of pad faces
- color() - Method in interface nxopen.display.SectionCurveSettingsBuilder
-
Returns the curve color.
- color() - Method in interface nxopen.display.TransientText
-
Returns the index of the color to be used to display the transient text.
- color() - Method in interface nxopen.DisplayableObject
-
Returns the color of the object.
- color - Variable in class nxopen.DisplayManager.J3dMaterial
-
object color
- color() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the break line color
License requirements: None.
- color() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- color() - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
-
Returns the color on the Curve section of the Flat Pattern tab of the View Style Dialog
License requirements: None.
- color() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
Returns the color on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
- color() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
Returns the color on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
- color() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
Returns the color on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
- color() - Method in interface nxopen.features.ColorFaceBuilder
-
Returns the color.
- color() - Method in interface nxopen.features.ColorFeatureBuilder
-
Returns the color
License requirements: None.
- color() - Method in interface nxopen.features.ColorFeatureGroupBuilder
-
Returns the color
License requirements: None.
- color() - Method in interface nxopen.features.CurveFeature
-
Returns the color of the feature
License requirements: None.
- color() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
- color() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Returns the color of loading.
- color() - Method in interface nxopen.features.vehicledesign.PendulumPlacementBuilder
-
Returns the display color of this pendulum.
- color() - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder
-
Returns the settings to specifies the 2D component curves color.
- color() - Method in interface nxopen.mechatronics.DisplayChangerBuilder
-
Returns the initial color display property
License requirements: None.
- color() - Method in interface nxopen.motion.RoadBuilder
-
Returns the color
License requirements: mechanisms ("MECHANISMS")
.
- color() - Method in interface nxopen.preferences.PartDrafting
-
Returns the color of the retained
Annotation
objects.
- color - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
-
Object color
- color - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveTypeDisplayData
-
Curve color
- COLOR - Static variable in class nxopen.preferences.PartObject.ColorSelection
-
User Defined Color
- color - Variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
-
Object color
- color - Variable in class nxopen.preferences.PartSheetmetal.TabCurveTypeDisplayData
-
Curve color
- color - Variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
-
Object color
- Color() - Constructor for class nxopen.uf.UFCgm.Color
-
- Color(int, String, double[], int) - Constructor for class nxopen.uf.UFCgm.Color
-
- color - Variable in class nxopen.uf.UFCgm.CustomWidths
-
- color - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
-
- color - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- color - Variable in class nxopen.uf.UFDisp.SystemParams
-
- color - Variable in class nxopen.uf.UFDrf.AskRetainColorFontWidthData
-
- color - Variable in class nxopen.uf.UFDrf.Cfw
-
- color - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- color - Variable in class nxopen.uf.UFDrf.TextCfw
-
- color - Variable in class nxopen.uf.UFObj.CreSettings
-
- color - Variable in class nxopen.uf.UFObj.DispProps
-
- color - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- color - Variable in class nxopen.uf.UFView.VdeData
-
- color - Variable in class nxopen.uf.UFView.VdeDataAndType
-
- color() - Method in interface nxopen.visualreporting.GroupLabel
-
Returns the color of the
GroupLabel
License requirements: None.
- COLOR_AND_TAG_OBJECT - Static variable in class nxopen.visualreporting.VisualReport.ReportingStyleOption
-
Matching objects will be both colored and tagged
- COLOR_AXIS - Static variable in class nxopen.cae.xyplot.ModelType
-
- COLOR_AXIS_LABEL - Static variable in class nxopen.cae.xyplot.ModelType
-
- COLOR_AXIS_LABEL - Static variable in class nxopen.cae.xyplot.TextType
-
Color Axis name label
- COLOR_AXIS_NUMBER - Static variable in class nxopen.cae.xyplot.ModelType
-
- COLOR_AXIS_NUMBER - Static variable in class nxopen.cae.xyplot.TextType
-
Color Axis name number
- COLOR_BAR - Static variable in class nxopen.cae.xyplot.GraphStyle
-
Option to display plot in ColorBar style
- COLOR_BY_WIDTH - Static variable in class nxopen.uf.UFCgm.Colors
-
- COLOR_BY_WIDTH - Static variable in class nxopen.uf.UFPlot.Colors
-
- COLOR_MAP - Static variable in class nxopen.cae.xyplot.GraphStyle
-
Option to display plot in ColorMap style
- COLOR_OBJECT - Static variable in class nxopen.visualreporting.VisualReport.ReportingStyleOption
-
Matching objects will be colored
- COLOR_REGION - Static variable in class nxopen.features.FitSurfaceBuilder.TargetType
-
- COLOR_TOOL - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- COLOR_TOOL - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Color Item
- colorAndLayers() - Method in interface nxopen.Step203Creator
-
- colorAndLayers() - Method in interface nxopen.StepCreator
-
Returns the color and layers - if set to true then NX color and layers will be preserverd
License requirements: None.
- colorApproach() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the color used for displaying approach elements
License requirements: None.
- ColorAttr() - Constructor for class nxopen.uf.UFSf.ColorAttr
-
- ColorAttr(int, double[], double) - Constructor for class nxopen.uf.UFSf.ColorAttr
-
- colorAttr - Variable in class nxopen.uf.UFSfLegend.IndexAttr
-
- colorAttribute() - Method in interface nxopen.cae.AttributeSelectionRecipe
-
Returns the color attribute.
- ColorAxisStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the axis display style.
- Colorbar() - Constructor for class nxopen.cae.Post.Colorbar
-
- Colorbar(Post.Spectrum, boolean, Post.Scale, boolean, int, Post.Threshold, double, double, boolean, boolean, NXColor, NXColor, Post.Position, Post.LimitDisplay, Post.LimitDisplay) - Constructor for class nxopen.cae.Post.Colorbar
-
Constructor for the Colorbar object.
- colorbar - Variable in class nxopen.cae.Post.PostviewGetColorbarData
-
- COLORBAR_ONLY - Static variable in class nxopen.cae.Post.Legend
-
- ColorBarPlot - Interface in nxopen.cae.xyplot
-
Manages the display of color bar plot.
- colorBodies() - Method in interface nxopen.routing.Stock
-
Colors the solid bodies of the stock based on the COLOR characteristic specified in the
StockData
of the stock.
- colorBy() - Method in interface nxopen.cam.PathDisplay
-
Returns the color by property
License requirements: None.
- ColorCodedRegionBuilder - Interface in nxopen.geometricutilities
-
- colorControlType() - Method in interface nxopen.cam.IpwAnalysisBuilder
-
Returns the control color
License requirements: None.
- ColorDefinition - Interface in nxopen
-
Represents a
ColorDefinition
, which is a representation of one color
on an NX color palette.
- ColorDefinitionRgb - Class in nxopen
-
Specifies rgb values for color
- ColorDefinitionRgb() - Constructor for class nxopen.ColorDefinitionRgb
-
- ColorDefinitionRgb(double, double, double) - Constructor for class nxopen.ColorDefinitionRgb
-
Constructor for the ColorDefinitionRgb object.
- colorDepthPass() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the color depth pass
License requirements: die_engineering ("DIE ENGINEERING")
.
- colorDraftAngleFailure() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the color draft angle failure
License requirements: die_engineering ("DIE ENGINEERING")
.
- colorDraftAnglePass() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the color draft angle pass
License requirements: die_engineering ("DIE ENGINEERING")
.
- colorDraftAngleWarning() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the color draft angle warning
License requirements: die_engineering ("DIE ENGINEERING")
.
- COLORED - Static variable in class nxopen.features.subdivision.DefineWorkRegionBuilder.FrozenRegionDefinitionMethods
-
Mark frozen region with color and do not allow its selection
- COLORED_LINES - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.LineImageTypes
-
Colored lines.
- colorEntryExit() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the color used for displaying entry and exit elements
License requirements: None.
- ColorExpressionsBuilder - Interface in nxopen.tooling
-
- ColorFaceBuilder - Interface in nxopen.features
-
- colorFailure() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the color failure
License requirements: die_engineering ("DIE ENGINEERING")
.
- ColorFeatureBuilder - Interface in nxopen.features
-
- ColorFeatureBuilder.OperationType - Class in nxopen.features
-
specify color or remove color type
- ColorFeatureGroupBuilder - Interface in nxopen.features
-
- ColorFeatureGroupBuilder.OperationType - Class in nxopen.features
-
specify color or remove color type
- ColorFeatureGroupBuilder.ProcessType - Class in nxopen.features
-
set color for new features only or set color and apply to all members
- ColorHLS() - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHLS
-
- ColorHLS(double, double, double) - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHLS
-
Constructor for the ColorHLS object.
- ColorHSV() - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHSV
-
- ColorHSV(double, double, double) - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHSV
-
Constructor for the ColorHSV object.
- colorIndex() - Method in interface nxopen.ColorDefinition
-
Returns the color index.
- colorLegendOption() - Method in interface nxopen.geometricanalysis.FaceAnalysisDisplayBuilder
-
Returns the color legend option.
- colorLine() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the color used for displaying path lines
License requirements: None.
- ColorManager - Interface in nxopen
-
Contains functionality pertaining to colors
To obtain an instance of this class, refer to
BasePart
Created in NX5.0.0
- COLORMAP - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DisplayTypes
-
Color Map only
- COLORMAP_AND_CONTOURS - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DisplayTypes
-
Color Map and Contours
- ColorMapGraph - Interface in nxopen.cae.xyplot
-
Manages the display color map graph.
- ColorMapPlot - Interface in nxopen.cae.xyplot
-
Manages the display of color map plot.
- colorMeasurePoint() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the color used for displaying measured points
License requirements: None.
- colorMode() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the color mode to display the image.
- colorName() - Method in interface nxopen.ColorDefinition
-
Returns the color name.
- colorName() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Returns the color name.
- colorName() - Method in interface nxopen.tooling.ColorExpressionsBuilder
-
Returns the color name
License requirements: None.
- colorOfBackgroundPlane() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns the color of grid background plane
License requirements: None.
- colorOption() - Method in interface nxopen.cae.xyplot.BarStyle3DSetting
-
Returns the filling color option
License requirements: None.
- colorOption() - Method in interface nxopen.cae.xyplot.PlateStyle3DSetting
-
- colorOption() - Method in interface nxopen.cae.xyplot.SurfaceStyleSetting
-
Returns the color option
License requirements: None.
- colorOption() - Method in interface nxopen.display.SectionCurveSettingsBuilder
-
Returns the curve color option
License requirements: None.
- colorOption() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the color option of the current ship structure type.
- colorOption() - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder
-
Returns the settings to specifies how the color of the 2D component curves is defined.
- colorPicker() - Method in interface nxopen.tooling.ColorExpressionsBuilder
-
Returns the color picker
License requirements: None.
- colorPicker() - Method in interface nxopen.tooling.MWCopySheetsBuilder
-
Returns the color picker for selecting the color to be assigned to the new copied sheets
License requirements: None.
- colorPicker() - Method in interface nxopen.tooling.StripLayoutStationInformationBuilder
-
Returns the color picker
License requirements: None.
- colorPlotType() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the color plot type
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- ColorRegionRule - Interface in nxopen
-
Represents a
FacetSelectionRule
that chains to collect all connected facets of same color.
- colorRetract() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the color used for displaying retract elements
License requirements: None.
- ColorRGB() - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorRGB
-
- ColorRGB(double, double, double) - Constructor for class nxopen.preferences.ViewVisualizationSpecialEffects.ColorRGB
-
Constructor for the ColorRGB object.
- colors() - Method in interface nxopen.BasePart
-
Manages the standard NX colors .
- colors() - Method in interface nxopen.CGMBuilder
-
Returns the color option to be used when creating the CGM.
- colors() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Returns the color option to be used when plotting.
- colors() - Method in interface nxopen.PrintPDFBuilder
-
Returns the color option to be used when creating the PDF document.
- colors - Variable in class nxopen.uf.UFCgm.CustomColors
-
- colors - Variable in class nxopen.uf.UFCgm.ExportOptions
-
- colors - Variable in class nxopen.uf.UFPlot.JobOptions
-
- COLORS_BY_WIDTH - Static variable in class nxopen.CGMBuilder.Color
-
Colors by Width, uses custom colors defined in CDF
- COLORS_BY_WIDTH - Static variable in class nxopen.PlotColorsWidthsBuilder.Color
-
Colors by Width
- COLORS_BY_WIDTH - Static variable in class nxopen.PrintPDFBuilder.Color
-
Part Colors
- colorSaturation() - Method in interface nxopen.display.EnvironmentBuilder
-
Returns the image-based lighting color saturation
License requirements: studio_render ("UG STUDIO RENDER")
.
- colorSaturation() - Method in interface nxopen.display.ImageBasedLighting
-
Returns the image-based lighting color saturation
License requirements: None.
- ColorScaleStyle - Interface in nxopen.cae.xyplot
-
Represents the color scale display style.
- colorScaleStyleSetting() - Method in interface nxopen.cae.xyplot.ColorAxisStyleSetting
-
Returns the color scale display style.
- colorSeed - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames
-
prefix seed name for auto groups grouped by color
- colorSettingVisualization() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing Visualization preferences settings for color setting tab applicable to displayed part .
- colorSettingVisualization() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Visualization preferences settings applicable to entire session .
- colorsWidthsBuilder() - Method in interface nxopen.PlotBuilder
-
Returns the Colors Widths builder.
- ColorTool - Interface in nxopen.uistyler
-
Represents a ColorTool for UI Styler.
- ColorTool.ValueChanged - Interface in nxopen.uistyler
-
Called when a dialog user enters a valid color value.
- colorTransition() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the color used for displaying transition elements
License requirements: None.
- ColorValueData() - Constructor for class nxopen.tooling.EnlargeSurfaceBuilder.ColorValueData
-
- ColorValueData() - Constructor for class nxopen.tooling.TrimRegionBuilder.ColorValueData
-
- colorWarning() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the color warning
License requirements: die_engineering ("DIE ENGINEERING")
.
- ColorWidth - Interface in nxopen
-
- colorWidthOption - Variable in class nxopen.uf.UFPlot.UghpglCmpOptions
-
- ColPrefs() - Constructor for class nxopen.uf.UFPlist.ColPrefs
-
- ColPrefs(boolean, String, UFTabnot.CellPrefs, boolean) - Constructor for class nxopen.uf.UFPlist.ColPrefs
-
- column() - Method in interface nxopen.blockstyler.Group
-
Returns the Column
License requirements: None.
- COLUMN - Static variable in class nxopen.geometricutilities.RectangularPattern.StaggerOptions
-
Stagger column
- Column() - Constructor for class nxopen.preferences.RoutingPartLibrary.Column
-
- Column(String, RoutingPartLibrary.ColumnStatus, RoutingPartLibrary.ColumnType) - Constructor for class nxopen.preferences.RoutingPartLibrary.Column
-
Constructor for the Column object.
- COLUMN_GRID_EQUIPMENT - Static variable in class nxopen.linedesigner.DBNode.NodeType
-
- COLUMN_TYPE_CALLOUT - Static variable in class nxopen.uf.UFPlist.ColumnType
-
- COLUMN_TYPE_GENERAL - Static variable in class nxopen.uf.UFPlist.ColumnType
-
- COLUMN_TYPE_QUANTITY - Static variable in class nxopen.uf.UFPlist.ColumnType
-
- columnBaseCrossSection() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column base cross section of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnBaseDepth() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column base depth of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnBaseDiameter() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column base diameter of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnBaseHeight() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column base height of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnBaseLowerDiameter() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column base lower diameter of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnBaseTypeEnum() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column base type of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnBaseUpperDiameter() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column base upper diameter of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnBaseWidth() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column base width of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- ColumnBuilder - Interface in nxopen.diagramming.tables
-
Represents a ColumnBuilder.
- columnCount() - Method in interface nxopen.features.shipdesign.DrawingSheetBuilder
-
Returns the number of column into which the views should be arranged on the drawing sheet.
- columnCount() - Method in interface nxopen.ITableEditorDataProvider
-
Returns the number of columns in the table
License requirements: None.
- columnCrossSection() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column cross section of columns of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnDataList() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column data list
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnDepth() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns the column depth of column feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnDepth() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column depth of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnDiameter() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns the column diameter of column feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnDiameter() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column diameter of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnDisplayIDs() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the status of column display ids in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnElevation() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column elevation of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- ColumnFeature - Interface in nxopen.linedesigner
-
Represents a column feature feature
To create or edit an instance of this class, use
ColumnFeatureBuilder
Created in NX9.0.0
- ColumnFeatureBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.ColumnFeature
Features.FeatureBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createColumnFeatureBuilder
Default values.
- ColumnFeatureBuilder.ColumnBaseType - Class in nxopen.linedesigner
-
This enum is providing possible column base types
- ColumnFeatureBuilder.ColumnType - Class in nxopen.linedesigner
-
This enum is providing possible column types
- ColumnGridEquipmentBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.ColumnGridEquipment builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createColumnGridEquipmentBuilder
Default values.
- ColumnGridEquipmentBuilder.ColumnBaseType - Class in nxopen.linedesigner
-
This enum is providing possible column base types
- ColumnGridEquipmentBuilder.ColumnType - Class in nxopen.linedesigner
-
This enum is providing possible column types
- columnHeight() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns the column height of column feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnHeight() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column height of columns of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnNumber() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the column number of pattern
License requirements: None.
- columnOriginPoint() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns the column origin point is returns where colums is created
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnRotate90Degrees() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the status of 90 degree column rotation for column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnSortCallback(Tree, int, Node, Node) - Method in interface nxopen.blockstyler.Tree.ColumnSortCallback
-
Represents the callback which gets called when column sort is attempted.
- columnSpacingDouble() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the spacing between columns
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnStyleEnum() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns the column style of column feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnThickness() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns the column thickness of column feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnThickness() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column thickness of coulmn grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnTitles() - Method in interface nxopen.blockstyler.DoubleTable
-
Returns the ColumnTitles
License requirements: None.
- columnTitles() - Method in interface nxopen.blockstyler.IntegerTable
-
Returns the ColumnTitles
License requirements: None.
- columnTypeEnum() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column type of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnUserDefineSuperSection() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns the user defined cross section of column feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnWideNumber() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the number of column of columns in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnWidth() - Method in interface nxopen.annotations.TableSectionBuilder
-
Returns the column width
License requirements: None.
- columnWidth() - Method in interface nxopen.linedesigner.ColumnFeatureBuilder
-
Returns the column width of column feature
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- columnWidth() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the column width of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- COMAC - Static variable in class nxopen.cae.CorrelShapemetrictype
-
Shape metric type is Coordinate Modal Assurance Criteria
- comacValues - Variable in class nxopen.cae.CorrelSolution.CalculateComacsData
-
comac values
- ComacViewerBuilder - Interface in nxopen.cae
-
- COMB - Static variable in class nxopen.geometricanalysis.CurveAnalysisDisplay.ShowFlagType
-
Deprecated.
show comb
- COMB - Static variable in class nxopen.preferences.PartModeling.CurveCurvatureDisplayType
-
Curve curvature display is Curvature Comb
- combDensity() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- combDensity - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- CombinationEvaluationOptions - Interface in nxopen.cae.responsesimulation
-
Represents the setting for combination evaluation.
- CombinationEvaluationOptions.EvaluationMethod - Class in nxopen.cae.responsesimulation
-
Specifies the calculation method of combination evaluation
- CombinationEvaluationOptions.MultipleExcitationCombinationMethod - Class in nxopen.cae.responsesimulation
-
Specifies combination method for multiple excitation combination
- combinationHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the combination holes
License requirements: None.
- combinationMethod() - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions
-
Returns the combination method for multiple excitation combination
License requirements: nx_response_anlys ("NX Response Analysis")
.
- combinationOptions() - Method in interface nxopen.cae.responsesimulation.PeakValueEvaluationSettingBuilder
-
Returns the setting of combination evaluation.
- combinationOptionsBuilder() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
Returns the setting of combination evaluation
License requirements: nx_response_anlys ("NX Response Analysis")
.
- combineAcross() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the combine across
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- combineAcrossEntities() - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
-
- combineAcrossIteration() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the combine geom
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- combineBody() - Method in interface nxopen.cae.Mesh0dBuilder
-
Returns the combine body option
License requirements: None.
- CombineBodyFeature - Interface in nxopen.features
-
Represents a boolean feature.
- combineConnectedJoints() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the indication to combine connected joints if they belong to the same body
License requirements: None.
- CombineCurvesDirection() - Constructor for class nxopen.uf.UFCurve.CombineCurvesDirection
-
- CombineCurvesDirection(UFCurve.Direction, UFCurve.DirectionStructU) - Constructor for class nxopen.uf.UFCurve.CombineCurvesDirection
-
- COMBINED - Static variable in class nxopen.motion.TirePropertyTnoBuilder.SlipForcesType
-
- COMBINED_WORK_PIECE - Static variable in class nxopen.tooling.WorkpieceBuilder.Types
-
The new assembly of Mold wizard
- CombinedProjection - Interface in nxopen.features
-
Represents a combined projection feature
To create or edit an instance of this class, use
CombinedProjectionBuilder
Created in NX6.0.0
- CombinedProjectionBuilder - Interface in nxopen.features
-
- combinedValue() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the combined value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- CombineFacetBodyBuilder - Interface in nxopen.facet
-
- combineIterOption() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the combine option
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- combineLoadcases(SimPart, SimSolution, SimSolutionStep[], double[], String) - Method in interface nxopen.cae.SolutionResult
-
- combineLoadcases(SimPart, SimResultReference, SimSolutionStep[], double[], String) - Method in interface nxopen.cae.SolutionResult
-
Combine the load cases
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- combineOption() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the combine option determines if two bodies that make a corner are combined into one body.
- combineRibWithTarget() - Method in interface nxopen.features.RibBuilder
-
Returns the combine rib with target flag
License requirements: None.
- CombineSheets - Interface in nxopen.features
-
Represents a combine sheets feature
To create or edit an instance of this class, use
CombineSheetsBuilder
Created in NX11.0.1
- CombineSheetsBuilder - Interface in nxopen.features
-
Represents a combine sheets builder.
- CombineTrisBuilder - Interface in nxopen.cae
-
- combineValueFromEntitiesOption() - Method in interface nxopen.cae.PostGraphAcrossIterationsBuilder
-
Returns the set combine across entities option type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- combInterneedleDensity() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- combInterneedleDensity - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- combMaxLength() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- COMBO_BOX - Static variable in class nxopen.blockstyler.Tree.ControlType
-
Combo box.
- COMBO_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
- combOptions() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
-
- combOptions() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the comb display block options
License requirements: None.
- combOptions() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the comb options
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- combOptions() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the comb options specification
License requirements: None.
- combOptions() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the comb display block options
License requirements: None.
- combOptions() - Method in interface nxopen.geometricanalysis.SurfaceIntersectionBuilder
-
Returns the comb display block options
License requirements: None.
- CombOptionsBuilder - Interface in nxopen.geometricutilities
-
- CombOptionsBuilder.AnalysisTypes - Class in nxopen.geometricutilities
-
Represents the Analysis types
- CombOptionsBuilder.LabelTypes - Class in nxopen.geometricutilities
-
Represents the Label types
- combRange() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the comb range
License requirements: None.
- combScaleFactor() - Method in interface nxopen.geometricanalysis.CurveAnalysisRecord
-
- COMM - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.DeviceTypeOptions
-
Use Comm
- COMMA - Static variable in class nxopen.ame.GeneralAnnotationSettingsBuilder.AnnotationSeparator
-
- COMMA - Static variable in class nxopen.annotations.DecimalPointCharacter
-
Specifies comma decimal point character
- COMMA - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Comma
- COMMA - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- COMMA - Static variable in class nxopen.preferences.DecimalPointCharacter
-
","
- Command - Interface in nxopen.report
-
Represents a command in command library.
- CommandBuilder - Interface in nxopen.report
-
- CommandBuilder.UserInputLocation - Class in nxopen.report
-
Represents the user input location in command.
- CommandImporter - Interface in nxopen.report
-
Represents a command importer to import the commands into command libary.
- CommandImporter.OverrideOption - Class in nxopen.report
-
Represents the override option when there is already a command existing.
- CommandLibrary - Interface in nxopen.report
-
Represents a command library in the command manager.
- CommandLibrary.MoveCommandLocation - Class in nxopen.report
-
Represents the moving command location.
- CommandManager - Interface in nxopen.report
-
Represents the command manager.
- commandManager() - Method in interface nxopen.report.ReportManager
-
Returns the
CommandManager
belonging to the report manager
Created in NX11.0.0
- commandType() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the command type
License requirements: None.
- commandUsed() - Method in interface nxopen.weld.WeldObjectBuilder
-
Returns the command name that was last used to create or modify features
License requirements: None.
- commandUsed() - Method in interface nxopen.weld.WeldPointExitBuilder
-
Returns the command name that was last used to create features.
- comment() - Method in interface nxopen.issue.IssueContent
-
Returns the issue comment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- comment() - Method in interface nxopen.issue.IssueContentBuilder
-
Returns the issue comment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- comment() - Method in interface nxopen.markup.MarkupObject
-
Returns the comment
License requirements: None.
- comment - Variable in class nxopen.mechatronics.ExpressionBlockBuilder.Slot
-
Comment Text
- comment - Variable in class nxopen.mechatronics.SignalAdapterBuilder.ParameterData
-
Comment Text
- comment - Variable in class nxopen.mechatronics.SignalAdapterBuilder.SignalData
-
Comment Text
- comment - Variable in class nxopen.mechatronics.SymbolTableBuilder.Symbol
-
Comment Text
- comment - Variable in class nxopen.uf.UFClone.AskCiCommentCheckingData
-
- comment - Variable in class nxopen.uf.UFClone.AskDefCiCommentCheckingData
-
- comment - Variable in class nxopen.uf.UFClone.CheckoutData
-
- commission() - Method in interface nxopen.ame.EplanSettingsBuilder
-
Returns the commission
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- commit() - Method in interface nxopen.assemblies.SubsetConfigurationBuilder
-
Commit the subset configuration changes to the
SubsetBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX8.5.0
- commit() - Method in interface nxopen.Builder
-
Commits any edits that have been applied to the builder.
- commit() - Method in interface nxopen.cam.SurfaceDriveGeometry
-
Commits any edits that have been applied to the builder.
- commit() - Method in interface nxopen.drawings.DraftingView
-
Commits and applies all the settings like
ViewStyle
to the View.This must be called on the view after creation or edit to reflect all the settings on it
License requirements: drafting ("DRAFTING")
Created in NX5.0.0
- commit() - Method in interface nxopen.drawings.FlatPatternViewStyle
-
Commits and applies all the settings done with set_callout_type_display
and set_object_type_display.
- commit(double, boolean, boolean, int) - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
- commit() - Method in interface nxopen.pdm.EffectivityTableBuilder
-
Commit the modified effectivity rows
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- commit() - Method in interface nxopen.pdm.PartFromPartBuilder
-
Creates the new part that has been fully-specified by calling methods on this
builder.
- commit() - Method in interface nxopen.pdm.PartFromTemplateBuilder
-
- commit(boolean) - Method in interface nxopen.pdm.PartFromTemplateBuilder
-
- commit() - Method in interface nxopen.preferences.FlatPatternViewPreferences
-
Commits and applies all the settings done with set_callout_type_display
and set_object_type_display.
- commit() - Method in interface nxopen.preferences.PartFlexiblePrintedCircuitDesign
-
Commits and applies all the settings done with set_callout_type_display
and set_object_type_display.
- commit() - Method in interface nxopen.preferences.PartSheetmetal
-
Commits and applies all the settings done with set_callout_type_display
and set_object_type_display.
- commit() - Method in interface nxopen.tooling.CloneObject
-
Performs the clone operation.
- commit() - Method in interface nxopen.validate.Parser
-
Runs parsing process
License requirements: None.
- commit() - Method in interface nxopen.validate.Validator
-
Runs checking process and returns the checking status.
- commitAddBc() - Method in interface nxopen.cae.SimBCBuilder
-
Commits the creation of the
SimBC
objects
or Commits the changes made to the
SimBC
and
adds the BC to the current active solution/step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.0
- commitAlternateFemRepresentationSource() - Method in interface nxopen.cae.AlternateFemRepresentationSourceBuilder
-
Commits the changes that have been applied to the builder and returns
the edited or newly created
AlternateFemRepresentationSource
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX12.0.0
- commitAndDisplay(View, boolean, boolean) - Method in interface nxopen.display.EnvironmentBuilder
-
Saves the attributes and optionally updates the display of image-based lighting
License requirements: studio_render ("UG STUDIO RENDER")
.
- commitAndDisplay(View, boolean) - Method in interface nxopen.display.ImageBasedLighting
-
Saves the attributes and optionally updates the display of image-based lighting
License requirements: None.
- commitAnnotation() - Method in interface nxopen.cae.PostAnnotationBuilder
-
Commits the annotation to create annotation object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- commitAsCopy() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- commitBc() - Method in interface nxopen.cae.SimBCBuilder
-
Commits the creation of the
SimBC
objects
or Commits the changes made to the
SimBC
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- commitBolt() - Method in interface nxopen.cae.BoltBuilder
-
Commit the builder and create a bolt mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
- commitChange() - Method in interface nxopen.cae.xyplot.IDisplayStyle
-
Commits any edits that have been applied to the display style.
- commitClone() - Method in interface nxopen.pdm.CaeCloneManager
-
- commitCreateOnTheFly() - Method in interface nxopen.features.CompositeCurveBuilder
-
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- commitCreateOnTheFly() - Method in interface nxopen.features.ExtractFaceBuilder
-
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- commitCreateOnTheFly() - Method in interface nxopen.features.WaveDatumBuilder
-
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- commitCreateOnTheFly() - Method in interface nxopen.features.WavePointBuilder
-
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- commitCreateOnTheFly() - Method in interface nxopen.features.WaveRoutingBuilder
-
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING")
.
- commitCreateOnTheFly() - Method in interface nxopen.features.WaveSketchBuilder
-
Commits the feature and set create on the fly flag
License requirements: solid_modeling ("SOLIDS MODELING")
.
- commitCurrentEdit() - Method in interface nxopen.routing.EditBendAngleBuilder
-
Commits the current edit operation.
- commitCurrentOperation() - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- commitDensities() - Method in interface nxopen.cae.MeshControlBuilder
-
Commits the creation of the
MeshControl
objects
or Commits the changes made to the
MeshControl
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX5.0.0
- commitDependentMesh() - Method in interface nxopen.cae.DependentMeshBuilder
-
Commits the creation of the
DependentMesh
objects
or Commits the changes made to the
DependentMesh
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX5.0.0
- commitDrag(Point) - Method in interface nxopen.routing.SplinePathBuilder
-
Clears the current drag network.
- commitElements() - Method in interface nxopen.cae.MultipleElementCreateBuilder
-
Commits the Builder, which creates elements as they were defined and returns the newly create elements.
- commitFaceSets() - Method in interface nxopen.weld.WeldPointBuilder
-
License requirements: ugweld ("UG WELD")
.
- commitFeature() - Method in interface nxopen.features.FeatureBuilder
-
Commits the feature parameters and creates the feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- commitFluidDomain() - Method in interface nxopen.cae.FluidDomainBuilder
-
Commits the creation of the
FluidDomainRecipe
objects
or Commits the changes made to the
FluidDomainRecipe
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
Created in NX7.5.2
- commitItem() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Commit the current item
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- commitLayoutState() - Method in interface nxopen.cae.LayoutStateBuilder
-
Commits the changes that have been applied to the builder and returns
the edited or newly created
LayoutState
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX11.0.0
- commitMaster() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Commit the current master
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- commitMesh() - Method in interface nxopen.cae.CombineTrisBuilder
-
Commit mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
- commitMesh() - Method in interface nxopen.cae.ElementModifyOrderBuilder
-
Commites the mesh.
- commitMesh() - Method in interface nxopen.cae.Mesh0dBuilder
-
Commits the creation of the
Mesh0d
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.0
- commitMesh() - Method in interface nxopen.cae.Mesh1dBuilder
-
- commitMesh() - Method in interface nxopen.cae.Mesh2dBuilder
-
- commitMesh() - Method in interface nxopen.cae.Mesh3dHexBuilder
-
- commitMesh() - Method in interface nxopen.cae.Mesh3dHybridBuilder
-
- commitMesh() - Method in interface nxopen.cae.Mesh3dTetBuilder
-
- commitMesh() - Method in interface nxopen.cae.SurfaceCoatBuilder
-
Commit the mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
- commitMmcs() - Method in interface nxopen.cae.MMCCreateBuilder
-
Commits the creation of the
MeshMate
objects
or Commits the changes made to the
MeshMate
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.0
- commitNode() - Method in interface nxopen.cae.NodeCreateBuilder
-
Commits the Builder, which creates the node as it was defined and returns the newly create node.
- commitNodes() - Method in interface nxopen.cae.MultipleNodeCreateBuilder
-
Commits the Builder, which creates nodes as they were defined and returns the newly create nodes.
- commitOffset(View) - Method in interface nxopen.display.EnvironmentBuilder
-
Updates the data and display for a change to the ground's offset
License requirements: studio_render ("UG STUDIO RENDER")
.
- commitOffset(View) - Method in interface nxopen.display.Stage
-
Updates the data and display for a change to the stage's offset
License requirements: None.
- commitOperation() - Method in interface nxopen.features.EmbeddedOperationBuilder
-
Commits the operation and creates the feature.
- commitRecordsChange() - Method in interface nxopen.cae.xyplot.Plot
-
Accepts record changed and process data to update data model
This method is only to update data model, it needs call
IDisplayableModel.updateDisplay()
to update display to reflect data change.
- commitReferenceSheets(WeldOverlapStatus) - Method in interface nxopen.weld.WeldPointBuilder
-
The commit for reference sheets
License requirements: ugweld ("UG WELD")
.
- commitResult() - Method in interface nxopen.cae.CompanionResultBuilder
-
Commits any edits that have been applied to the builder, This method must be used instead of commit
if you want to get the
CompanionResult
returned.
- commitResultMeasure() - Method in interface nxopen.motion.ResultMeasureBuilder
-
Commits the Builder, and returns the created result measure object.
- commitSection(Section) - Method in interface nxopen.weld.WeldPointBuilder
-
Commit created section
License requirements: ugweld ("UG WELD")
.
- commitShowhide() - Method in interface nxopen.cae.PostShowhideBuilder
-
Commits the showhide to show or hide the selected entities
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- commitThisPlacement() - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Commits the current placement operation.
- commitWall(View, int, boolean) - Method in interface nxopen.display.Stage
-
Updates the data and display for a given wall
License requirements: None.
- commitWeldconnection() - Method in interface nxopen.cae.CAEWeldConnectionBuilder
-
- commitWithPartialMesh() - Method in interface nxopen.cae.Mesh3dHybridBuilder
-
Commits the creation of the
Mesh3d
object
or Commits the changes made to the
Mesh3d
object
returns with partial meshes if 3d Hybrid meshing fails.
- commitWithPartialMesh() - Method in interface nxopen.cae.Mesh3dTetBuilder
-
Commits the creation of the
Mesh3d
object
or Commits the changes made to the
Mesh3d
object
returns with partial meshes if 3d Tetrahedral meshing fails.
- COMMON - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.VarScopes
-
Variable has common scope
- common() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color common
License requirements: None.
- COMMON_FRACTION - Static variable in class nxopen.drawings.ScaleValueFormatTypes
-
- COMMON_OFFSET_TRANSFORM - Static variable in class nxopen.positioning.Constraint.Type
-
For internal use only
- commonDepth() - Method in interface nxopen.cam.CutLevelPlanar
-
Returns the common depth
License requirements: None.
- commonSlugHole() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the common slug hole switch of pierce holes
License requirements: ug_die_design ("Die Design")
.
- commonWorkflow() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the common workflow builder
License requirements: None.
- CommonWorkflowBuilder - Interface in nxopen.annotations
-
- commonZone() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the common zone toggle
License requirements: None.
- COMMPOUND - Static variable in class nxopen.mechatronics.GanttOperationBuilder.OperationType
-
Compound operation
- communicationInterval() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the communication interval
License requirements: mechanisms ("MECHANISMS")
.
- communicationIntervalType() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the communication interval type - possible values are Constant, Variable
License requirements: mechanisms ("MECHANISMS")
.
- comp() - Method in interface nxopen.cae.ResultVariable
-
Returns the Component
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- COMP - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteLevel
-
- comp1() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the comp1
License requirements: None.
- comp2() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the comp2
License requirements: None.
- comp3() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the comp3
License requirements: None.
- COMP_ALLEDGES - Static variable in class nxopen.uf.UFModl.CompareIdenticalfaceRule
-
- COMP_COARSE - Static variable in class nxopen.uf.UFModl.CompareAccuracy
-
- COMP_DEFAULT - Static variable in class nxopen.uf.UFModl.CompareAccuracy
-
- COMP_ENT_CHANGED - Static variable in class nxopen.uf.UFModl.CompareEntityType
-
- COMP_ENT_IDENTICAL - Static variable in class nxopen.uf.UFModl.CompareEntityType
-
- COMP_ENT_NOT_COMPARED - Static variable in class nxopen.uf.UFModl.CompareEntityType
-
- COMP_ENT_SUPPRESSED - Static variable in class nxopen.uf.UFModl.CompareEntityType
-
- COMP_ENT_UNIQUE - Static variable in class nxopen.uf.UFModl.CompareEntityType
-
- COMP_ENT_UNKNOWN - Static variable in class nxopen.uf.UFModl.CompareEntityType
-
- COMP_FINE - Static variable in class nxopen.uf.UFModl.CompareAccuracy
-
- COMP_GEOM - Static variable in class nxopen.uf.UFModl.CompareIdenticalfaceRule
-
- COMP_GROUP_NOT_UPTODATE - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- COMP_GROUP_UPDATED_SUCCESSFULLY - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- COMP_NONE - Static variable in class nxopen.uf.UFModl.CompareIdenticalfaceRule
-
- COMP_NONIDENTICALSF_CHANGED - Static variable in class nxopen.uf.UFModl.CompareChangeduniquefaceRule
-
- COMP_NONIDENTICALSF_UNIQUE - Static variable in class nxopen.uf.UFModl.CompareChangeduniquefaceRule
-
- COMP_ONLYEXTERNAL - Static variable in class nxopen.uf.UFModl.CompareIdenticalfaceRule
-
- COMP_SET_ABSENT - Static variable in class nxopen.uf.UFWeight.ExceptionReason
-
- COMP_SUPPRESSED - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
suppressed component
- COMPACT - Static variable in class nxopen.cae.Post.ShowHeader
-
- COMPANION - Static variable in class nxopen.cae.ResultsManipulationBuilder.OutputResultType
-
- CompanionResult - Interface in nxopen.cae
-
Represents additional results data that will augment a primary set of Analysis results associated to a
SimSolution
.
- CompanionResultBuilder - Interface in nxopen.cae
-
- CompanionResultBuilder.CompanionResultDisposition - Class in nxopen.cae
-
Companion result disposition indicates how the Companion result will be disposed of when primary result is deleted.
- CompanionResultBuilder.ResultAppendMethod - Class in nxopen.cae
-
Companion results appending method which indicates how Companion results will be appended to the existing primary results.
- CompanionResultCollection - Interface in nxopen.cae
-
- companionResults() - Method in interface nxopen.cae.SimResultReference
-
Returns the CAE Companion Results collection belonging to this Result Reference .
- companionResultsFile() - Method in interface nxopen.cae.CompanionResultBuilder
-
Returns the companion results file name.
- company() - Method in interface nxopen.IgesCreator
-
Returns the company - company name
License requirements: None.
- company() - Method in interface nxopen.Step203Creator
-
- company() - Method in interface nxopen.Step214Creator
-
- company() - Method in interface nxopen.StepCreator
-
Returns the company
License requirements: None.
- COMPANY_PROPRIETARY_INFO_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- COMPANY_SPECIFIC_PROPRIETARY_INFO - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes
-
company specific proprietary info
- companyName() - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
-
Returns the company name
License requirements: None.
- CompanyProprietaryInformation - Interface in nxopen.annotations
-
- CompanyProprietaryInformationBuilder - Interface in nxopen.annotations
-
- compare(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
-
- COMPARE_COMPLETED - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_CURVES_EQUIVALENT - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_CURVES_IDENTICAL - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_EDGES_EQUIVALENT - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_EDGES_IDENTICAL - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_FACES_EQUIVALENT - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_FACES_IDENTICAL - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_NOMATCH - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_OBJECT_NOT_ALIVE - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_SURFACES_EQUIVALENT - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_SURFACES_IDENTICAL - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_UNABLE_TO_FACET - Static variable in class nxopen.uf.UFConstants
-
- COMPARE_UNSUITABLE_OBJECTS - Static variable in class nxopen.uf.UFConstants
-
- compareDisplayFiles(String, String, Post.ASCIIDiffTolerances) - Method in interface nxopen.cae.Post
-
Utility to compare post ascii files
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- compareEmphasizeMode() - Method in interface nxopen.features.shipdesign.CompareModeBuilder
-
Returns the compare emphasize mode.
- CompareEntityInfo() - Constructor for class nxopen.uf.UFModl.CompareEntityInfo
-
- CompareEntityInfo(int, UFModl.CompareEntityMatch[]) - Constructor for class nxopen.uf.UFModl.CompareEntityInfo
-
- CompareEntityMatch() - Constructor for class nxopen.uf.UFModl.CompareEntityMatch
-
- CompareEntityMatch(Tag, Tag, UFModl.CompareEntityType, double, double) - Constructor for class nxopen.uf.UFModl.CompareEntityMatch
-
- compareFeatAndExp - Variable in class nxopen.uf.UFModl.CompareOptions
-
- compareMethod() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the compare method
License requirements: None.
- compareMethodType() - Method in interface nxopen.drawings.VisualDrawingComparePrefsBuilder
-
Returns the compare method type
License requirements: None.
- CompareModeBuilder - Interface in nxopen.features.shipdesign
-
This class is used to compare between the two Shipbuilding modes of Design and Manufacturing.
- CompareModeBuilder.CompareMode - Class in nxopen.features.shipdesign
-
Compare Mode type
- compareObject() - Method in interface nxopen.features.shipdesign.FilterBuilder
-
Returns the object that is used to compare the property values with.
- compareObjects() - Method in interface nxopen.mechatronics.ECADImportBuilder
-
Compares imported ECAD objects with logical objects.
- CompareOptions() - Constructor for class nxopen.uf.UFModl.CompareOptions
-
- CompareOptions(int, double, UFModl.CompareAccuracy, boolean, UFModl.CompareIdenticalfaceRule, boolean, boolean) - Constructor for class nxopen.uf.UFModl.CompareOptions
-
- ComparePartEntitiesData() - Constructor for class nxopen.uf.UFModl.ComparePartEntitiesData
-
- ComparePartEntitiesData(UFModl.CompareEntityInfo, UFModl.CompareEntityInfo, UFModl.CompareEntityInfo, UFModl.CompareEntityInfo) - Constructor for class nxopen.uf.UFModl.ComparePartEntitiesData
-
- ComparePartEntitiesData3() - Constructor for class nxopen.uf.UFModl.ComparePartEntitiesData3
-
- ComparePartEntitiesData3(UFModl.CompareEntityInfo, UFModl.CompareEntityInfo, UFModl.CompareEntityInfo, UFModl.CompareEntityInfo) - Constructor for class nxopen.uf.UFModl.ComparePartEntitiesData3
-
- ComparePartMapData() - Constructor for class nxopen.uf.UFModl.ComparePartMapData
-
- ComparePartMapData(UFModl.ComparePartEntitiesData, UFModl.ComparePartEntitiesData, boolean) - Constructor for class nxopen.uf.UFModl.ComparePartMapData
-
- ComparePartMapData3() - Constructor for class nxopen.uf.UFModl.ComparePartMapData3
-
- ComparePartMapData3(UFModl.ComparePartEntitiesData3, UFModl.ComparePartEntitiesData3, boolean) - Constructor for class nxopen.uf.UFModl.ComparePartMapData3
-
- comparePath(double, double) - Method in interface nxopen.cam.Operation
-
Compare Path
License requirements: cam_base ("CAM BASE")
.
- CompareReportBuilder - Interface in nxopen.drawings
-
- CompareRunsBuilder - Interface in nxopen.routing
-
Represents a
CompareRunsBuilder
, used to compare runs in the work
part to the ones in another part, or to runs defined in xml files gathered in a folder
(native mode) or on an item revision (managed mode).
- CompareRunsBuilder.CompareTypes - Class in nxopen.routing
-
The Compare Type selection Enum.
- compareTestOutput(String, String) - Method in interface nxopen.BaseSession
-
- compareTo(Object) - Method in class nxopen.Enum
-
Compares this enum with the specified object.
- compareTolerance() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- compareTolerance() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the compare tolerance
License requirements: None.
- compareTopology(Tag, Tag, double, double) - Method in interface nxopen.uf.UFModeling
-
- compareTypesEnum() - Method in interface nxopen.routing.CompareRunsBuilder
-
Returns the Compare type: part or xml
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- compareUghpglFiles(String, String, UFPlot.UghpglCmpOptions, String) - Method in interface nxopen.uf.UFPlot
-
- compareValue() - Method in interface nxopen.ame.AccessorEvaluatorBuilder
-
Returns the comparative value given by user
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- compareXmlFiles(String, String, XmlComparator.Options) - Method in interface nxopen.validate.XmlComparator
-
Compares two xml format files.
- COMPARING_DIFF_TYPES - Static variable in class nxopen.uf.UFConstants
-
- ComparisonResult - Interface in nxopen.mechatronics
-
Represents comparison result .
- ComparisonResult.Category - Class in nxopen.mechatronics
-
Defines categories of comparison results
- ComparisonResultAttribute - Interface in nxopen.mechatronics
-
Represents attribute of comparison result .
- ComparisonResultBase - Interface in nxopen.mechatronics
-
Represents base object of comparison result .
- ComparisonResultContext - Interface in nxopen.mechatronics
-
Represents context of comparison results .
- ComparisonResultContext.ResolveConflictAction - Class in nxopen.mechatronics
-
Defines actions for resolving conflicts
- ComparisonResultElectricalPart - Interface in nxopen.mechatronics
-
Represents electrical part of comparison result .
- ComparisonResultElectricalPart.AttributesData - Class in nxopen.mechatronics
-
- ComparisonResultElectricalPart.Status - Class in nxopen.mechatronics
-
Defines statuses of electrical parts
- comparisonStatus() - Method in interface nxopen.mechatronics.ComparisonResultElectricalPart
-
Returns the status from the electrical part
License requirements: None.
- compatibleVersion() - Method in interface nxopen.ame.TiaPortalProjectSettingsBuilder
-
Returns the compatible version
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- CompDrawingBuilder - Interface in nxopen.tooling
-
- CompDrawingBuilder.ComponentTypeSelection - Class in nxopen.tooling
-
Specifies the type of components.
- CompDrawingBuilder.DrawingType - Class in nxopen.tooling
-
Specifies the drawing type.
- CompDrawingBuilder.FilterSelection - Class in nxopen.tooling
-
Specifies the filter of components.
- CompDrawingBuilder.ProjectionType - Class in nxopen.tooling
-
Specifies the project type.
- COMPENSATED - Static variable in class nxopen.die.SpringbackCompensationBuilder.ResultSheetType
-
Compensated sheet body.
- compensateRoughData(CompensateRoughData) - Method in interface nxopen.die.DieCollection
-
- CompensateRoughData - Interface in nxopen.features
-
Represents a compensate rough curve or compensate rough sheet feature
To create or edit an instance of this class, use
CompensateRoughDataBuilder
Created in NX6.0.0
- CompensateRoughDataBuilder - Interface in nxopen.die
-
- CompensateRoughDataBuilder.ApproximationType - Class in nxopen.die
-
Settings for the amount of approximation to perform.
- CompensateRoughDataBuilder.Types - Class in nxopen.die
-
Settings for the type of data being compensated.
- compensationNumber() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the compensation number
License requirements: None.
- compensationType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the compensation type
License requirements: None.
- compFactor() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the complexity factor.
- compFunctions - Variable in class nxopen.uf.UFMotion.VectorForceTorque
-
- COMPILEUNIT - Static variable in class nxopen.ame.PlcRule.RefObjectType
-
- complement - Variable in class nxopen.uf.UFCurve.LineArc
-
- complementAngleFlag() - Method in interface nxopen.features.AngularDimBuilder
-
Returns the complement angle flag
License requirements: None.
- complementArc() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
Complements the circular blend curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
- complementArc() - Method in interface nxopen.geometricutilities.CurveLimitsData
-
Complements the arc
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- COMPLETE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.UnfoldMode
-
Onestep unfold mode is complete
- COMPLETE - Static variable in class nxopen.cam.CAMFeature.ProcessStatus
-
The feature's operation toolpaths are complete
- COMPLETE - Static variable in class nxopen.cam.CAMObject.Status
-
Object path has been output
- COMPLETE - Static variable in class nxopen.preferences.GeneralViewLockmethodOption
-
Locked
- COMPLETE - Static variable in class nxopen.preferences.SessionPdm.JtUpdateFromSourceType
-
- COMPLETE - Static variable in class nxopen.preferences.SessionPdm.SynchroniseOnLoadType
-
- COMPLETE - Static variable in class nxopen.preferences.SessionPdm.SynchroniseOnSaveType
-
- COMPLETE_CHECK_AND_OUTPUT_ERRORS - Static variable in class nxopen.cae.SimSolution.SetupCheckOption
-
perform all set up checks and report all errors
- COMPLETE_SUBSTRING - Static variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.MatchUsingType
-
Compare complete string
- completeStructure() - Method in interface nxopen.BasePart
-
Make additions necessary to complete the incomplete assembly structure of the input part
License requirements: None.
- complex() - Method in interface nxopen.cae.BaseResultType
-
Returns a value indicating whether the result type is a complex value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- Complex - Class in nxopen.cae
-
A complex number .
- Complex() - Constructor for class nxopen.cae.Complex
-
- Complex(double, double) - Constructor for class nxopen.cae.Complex
-
Constructor for the Complex object.
- COMPLEX - Static variable in class nxopen.cae.PostScenarioVariantType
-
a complex number
- complex - Variable in class nxopen.cae.Result.DeformationParameters
-
Deprecated.
- complex - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- complex() - Method in interface nxopen.cae.ResultVariable
-
Returns the Complex type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- COMPLEX - Static variable in class nxopen.fields.FieldVariable.ValueType
-
Complex
- COMPLEX - Static variable in class nxopen.routing.AssignDiscontinuityBuilder.Types
-
- COMPLEX - Static variable in class nxopen.weld.WeldGrooveBuilder.Prepare
-
Complex
- COMPLEX - Static variable in class nxopen.weld.WeldPrepareEdges
-
Same as entire edge, but use if a portion of target body is below the desired weld
- COMPLEX_ELONGATED_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- COMPLEX_MAGNITUDE_PHASE - Static variable in class nxopen.fields.FieldVariable.ValueType
-
(Legacy) complex_magnitude_phase
- COMPLEX_REAL_IMAGINARY - Static variable in class nxopen.fields.FieldVariable.ValueType
-
(Legacy) complex_real_imaginary
- COMPLEX_SCALAR_FIELD_WRAPPER - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- COMPLEX_TRANSFORM - Static variable in class nxopen.cae.PreTestSolutionBuilder.ModeConversionType
-
All sensors must be triax
- COMPLEX_VECTOR_FIELD_WRAPPER - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- complexCriterion() - Method in interface nxopen.cae.DeformationParameters
-
Returns the complexity criterion.
- ComplexData() - Constructor for class nxopen.cae.AfuData.ComplexData
-
- ComplexData() - Constructor for class nxopen.cae.ftk.ArrayRecord2D.ComplexData
-
- COMPLEXEIGEN - Static variable in class nxopen.cae.Result.SolutionType
-
Complex Eigen
- complexGraphTypes() - Method in interface nxopen.cae.PostGraphBuilder
-
Returns the complex plot display option while plotting complex result type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- complexOption() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2D
-
Returns the complex option
License requirements: None.
- complexOption() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2DBarChart
-
Returns the complex option
License requirements: None.
- complexOption() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles2DColorContour
-
Returns the complex option
License requirements: None.
- complexOption() - Method in interface nxopen.cae.xyplot.GeneralDisplayStyles3D
-
Returns the complex option
License requirements: None.
- complexOption() - Method in interface nxopen.cae.xyplot.PlotParameters
-
Returns the complex options,if complex option is smaller than zero, it will use default complex option from active template file
License requirements: None.
- ComplexOption2D - Class in nxopen.cae.xyplot
-
Represents the 2D plot complex option
- ComplexOption2DBarChart - Class in nxopen.cae.xyplot
-
Represents the 2D bar chart plot complex option
- ComplexOption2DColorContour - Class in nxopen.cae.xyplot
-
Represents the 2D color contour plot complex option
- ComplexOption3D - Class in nxopen.cae.xyplot
-
Represents the 3D plot complex option
- complexPoint() - Method in interface nxopen.routing.AssignDiscontinuityBuilder
-
Returns the Rcp type of the selected object
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- ComplexScalarFieldWrapper - Interface in nxopen.fields
-
This class defines a complex value that is internally
backed up by a field or two expressions.
- ComplexSectionBasedMatrixRecord - Interface in nxopen.cae.ftk
-
Represents a section based matrix record which has complex data values.
- ComplexSectionBasedMatrixRecord.SectionData - Class in nxopen.cae.ftk
-
- complexSubFeatures - Variable in class nxopen.uf.UFGdt.AskComplexSubFeaturesData
-
- ComplexVectorFieldWrapper - Interface in nxopen.fields
-
This class defines a complex value that is internally
backed up by a field or six expressions.
- compName() - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilder
-
Returns the simulation component name.
- compName() - Method in interface nxopen.presslinesimulation.LinearCamBuilder
-
Returns the unique name used to identify the simulation component.
- compName() - Method in interface nxopen.presslinesimulation.RotaryCamBuilder
-
Returns the unique name used to identify the simulation component.
- compNames - Variable in class nxopen.uf.UFWeight.Exceptions
-
- COMPONENT - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.EntityType
-
2D Component
- Component - Interface in nxopen.assemblies
-
- component - Variable in class nxopen.assemblies.ComponentAssembly.AddComponentData
-
The new Component
- component() - Method in interface nxopen.cae.DeformationParameters
-
Returns the result component that is used for deforming the model.
- COMPONENT - Static variable in class nxopen.cae.ElementRotateBuilder.MethodType
-
translate by components
- COMPONENT - Static variable in class nxopen.cae.ElementTranslateBuilder.MethodType
-
translate by components
- component() - Method in interface nxopen.cae.PostJtExportBuilder
-
Returns the component of the builder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- COMPONENT - Static variable in class nxopen.cae.PostScenarioVariantType
-
a component
- COMPONENT - Static variable in class nxopen.cae.responsesimulation.SensorType
-
- component - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- COMPONENT - Static variable in class nxopen.cam.CollisionPairBuilder.Filter
-
component filter
- COMPONENT - Static variable in class nxopen.cam.ProbeControlParametersBuilder.PrintType
-
Increment component
- component() - Method in interface nxopen.features.shipdesign.AddDataSetBuilder
-
Returns the component to add the data set to
License requirements: None.
- component() - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder
-
Returns the component to validate
License requirements: None.
- component() - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
Returns the component to preview
License requirements: None.
- COMPONENT - Static variable in class nxopen.features.shipdesign.ShipCoordinatesBuilder.Selection
-
Allows routing component selection.
- component() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the list of the components to check interference with the impact sheets
License requirements: None.
- COMPONENT - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
A component assigned as a
electrical connector or device.
- Component - Interface in nxopen.layout2d
-
Represents the Component object.
- COMPONENT - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- component() - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder
-
Returns the select 2D Comoponent instance to create definition
License requirements: None.
- component() - Method in interface nxopen.mechatronics.ChangeOwnerBuilder
-
Returns the component which is expected to be the owner of physics objects.
- component() - Method in interface nxopen.motion.ControlInputPortBuilder
-
Returns the component that is measured by the control input element for the selected variable.
- component() - Method in interface nxopen.motion.GraphBuilder
-
- COMPONENT - Static variable in class nxopen.motion.LinkInitialVelocity.AngularVelocityType
-
Component type define rotate csys
- component - Variable in class nxopen.pdm.PendingComponentsManager.AddComponentData
-
- COMPONENT - Static variable in class nxopen.routing.CustomManager.NavigatorType
-
The objects were selected in the component navigator.
- COMPONENT - Static variable in class nxopen.routing.electrical.Connection.RouteLevel
-
Route to the connector component directly without regard for the pins.
- component() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the component to create drawing.
- component() - Method in interface nxopen.tooling.ElectrodeDeleteBuilder
-
Returns the utility to get component to delete.
- COMPONENT - Static variable in class nxopen.tooling.ElectrodeDeleteBuilder.Types
-
Delete electrode, holder and pallet.
- component() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the component to assign die components mounted to a kinematic component.
- COMPONENT - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterAccordingToAttributeType
-
- COMPONENT - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.FilterType
-
- COMPONENT - Static variable in class nxopen.tooling.ValidCheckBuilder.SelMode
-
Selection type will be set to component
- COMPONENT - Static variable in class nxopen.visualreporting.VisualReport.ReportingObjectTypeOption
-
The reporting objects are components.
- COMPONENT - Static variable in class nxopen.visualreporting.VisualReport.ScopeTypeOption
-
The report is assembly component report
- Component.AnchorPointData - Class in nxopen.layout2d
-
- Component.FindComponentPatternsData - Class in nxopen.assemblies
-
- Component.PositionData - Class in nxopen.assemblies
-
- Component.RealQuantityData - Class in nxopen.assemblies
-
- Component.RepresentationMode - Class in nxopen.assemblies
-
Representation status of a component
- Component.TransformData - Class in nxopen.layout2d
-
- component2dCollection() - Method in interface nxopen.Part
-
Returns the ComponentCollection instance belonging to this part .
- component2dSettings() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the 2d component settings block builder, this builder stores the settings of the 2d component
License requirements: None.
- COMPONENT_ADDED_DATE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Component Added Date
- COMPONENT_AS_PART_ATTRIBUTE - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Apply attribute to the component as a part attribute
- COMPONENT_ATTRIBUTE - Static variable in class nxopen.formboard.FaceAnnotationBuilder.Types
-
Import CGM file by selecting a component
- COMPONENT_GROUP_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Component group name
- COMPONENT_GROUPS_LOAD_OPTIONS - Static variable in class nxopen.BasePart.BookmarkOption
-
Write component groups and load options.
- COMPONENT_GROUPS_LOAD_OPTIONS_PLUS_DISPLAY - Static variable in class nxopen.BasePart.BookmarkOption
-
Write component groups, load options and display attributes
- COMPONENT_GROUPS_ONLY - Static variable in class nxopen.BasePart.BookmarkOption
-
Write component groups only.
- COMPONENT_GROUPS_ONLY_PLUS_DISPLAY - Static variable in class nxopen.BasePart.BookmarkOption
-
Write component groups and display attributes
- COMPONENT_INSTANCE - Static variable in class nxopen.AttributePropertiesBaseBuilder.ObjectOptions
-
Deprecated.
Apply attribute to the instance of the component.
- COMPONENT_INSTANCE - Static variable in class nxopen.AttributeTemplatesBuilder.AccessKey
-
This attribute template will be accessible by component instances
- COMPONENT_NAME - Static variable in class nxopen.preferences.RoutingElectrical.ComponentMatchType
-
Match component name during component assignment.
- COMPONENT_NAME_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Component name
- COMPONENT_OCCURRENCE - Static variable in class nxopen.AttributeTemplatesBuilder.AccessKey
-
This attribute template will be accessible by component occurrences
- COMPONENT_OF_CADBODY - Static variable in class nxopen.cae.ConvertToConvergentBodyBuilder.Option
-
The orginal component inside of assembly that polygon body is derived from in FEM Part
- COMPONENT_ONLY - Static variable in class nxopen.assemblies.ComponentAssembly.OpenOption
-
Open the component but none of its children
- COMPONENT_PARENT - Static variable in class nxopen.cam.CollisionPairBuilder.Filter
-
component parent filter
- COMPONENT_PATTERN_TYPE_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Component Pattern Type property
- COMPONENT_POSITION - Static variable in class nxopen.motion.FlexBodyBuilder.Positioning
-
Positioning to the place where the component is in assembly
- COMPONENT_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Assembly Navigator column property
- COMPONENT_RECEPTACLE - Static variable in class nxopen.ame.MountingInterfaceBuilder.InterfaceType
-
- ComponentAssembly - Interface in nxopen.assemblies
-
Represents the set of
Component
s that make up an
assembly.
- componentAssembly() - Method in interface nxopen.BasePart
-
Returns the component assembly.
- ComponentAssembly.AddComponentData - Class in nxopen.assemblies
-
- ComponentAssembly.CheckedoutStatusOfObjectsData - Class in nxopen.assemblies
-
- ComponentAssembly.CheckinCheckoutOption - Class in nxopen.assemblies
-
Check in and Check out options for components
- ComponentAssembly.CheckoutAllModifiedObjectsData - Class in nxopen.assemblies
-
- ComponentAssembly.CloseModified - Class in nxopen.assemblies
-
Indicates how close component should handle component parts when they are modified
- ComponentAssembly.CreateIsolateViewWithComponentsData - Class in nxopen.assemblies
-
- ComponentAssembly.HideComponentsInIsolateViewData - Class in nxopen.assemblies
-
- ComponentAssembly.OpenComponentsData - Class in nxopen.assemblies
-
- ComponentAssembly.OpenComponentStatus - Class in nxopen.assemblies
-
Open Component Status
- ComponentAssembly.OpenOption - Class in nxopen.assemblies
-
Open options for open_components
- ComponentAssembly.OrderTargetLocation - Class in nxopen.assemblies
-
Option controls whether reordered
Component
s are placed
before or after the target
Component
- ComponentAssembly.RealQuantityData - Class in nxopen.assemblies
-
- ComponentAssembly.RestructureComponentsData - Class in nxopen.assemblies
-
- ComponentAssembly.ShowComponentsInIsolateViewData - Class in nxopen.assemblies
-
- ComponentAssembly.SubstitutionMode - Class in nxopen.assemblies
-
Defines how a component substitution operation is performed.
- ComponentAssembly.SuppressedState - Class in nxopen.assemblies
-
Defines the component supression states.
- ComponentAssembly.SuppressedStateData - Class in nxopen.assemblies
-
- componentCam() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
Returns the cam component cam type
License requirements: None.
- ComponentCollection - Interface in nxopen.layout2d
-
- componentCollection() - Method in interface nxopen.sim.KinematicConfigurator
-
Returns the ComponentCollection instance belonging to this SimKim .
- ComponentConstraint - Interface in nxopen.positioning
-
Constraint for use in positioning assembly objects in NX.
- ComponentConstraint.DirectionToFixed - Class in nxopen.positioning
-
Specifies how a constraint affects the positioning of a component.
- ComponentConstraintGroup - Interface in nxopen.positioning
-
Constraint group which represents a group of component constraints in NX.
- ComponentConstraintGroup.ConstraintsCollectionType - Class in nxopen.positioning
-
the enum to define constraint collection type
- ComponentConstraintGroupBuilder - Interface in nxopen.positioning
-
- ComponentData - Interface in nxopen.annotations
-
A ComponentData object can be used to query the components of an annotation.
- ComponentData - Interface in nxopen.cae.connections
-
Composer connection.
- ComponentDefinition - Interface in nxopen.layout2d
-
Represents a component definition.
- ComponentDefinitionCollection - Interface in nxopen.layout2d
-
- componentDefinitions() - Method in interface nxopen.Part
-
Returns the ComponentDefinitionCollection instance belonging to this part .
- componentenda - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskDamperData
-
Component end A of the damper element (either translational or rotational).
- componentenda - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskSpringData
-
Component end A of the spring element (either translational or rotational).
- componentEndAState() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the component end a state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- componentEndAState() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the component end a state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- componentendb - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskDamperData
-
Component end B of the damper element (either translational or rotational).
- componentendb - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskSpringData
-
Component end B of the spring element (either translational or rotational).
- componentEndBState() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the component end b state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- componentEndBState() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the component end b state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- componentFeature() - Method in interface nxopen.features.UserDefinedFeatureUpdateEvent
-
Returns the component feature being updated
License requirements: None.
- ComponentGroup - Interface in nxopen.assemblies
-
Represents a Component Group that is defined within an Assembly.
- ComponentGroupCollection - Interface in nxopen.assemblies
-
Contains a collection of Component Groups a
ComponentGroup
that are defined within an Assembly part.
- componentGroups() - Method in interface nxopen.Part
-
Returns the collection of ComponentGroups for this part .
- componentHasBIPGeometry(Component) - Method in interface nxopen.routing.RouteManager
-
Determines whether or not a built-in path component has proper work part geometry.
- componentHasPosition(String) - Method in interface nxopen.pdm.PendingComponentsManager
-
Determines whether a given pending component has been positioned
by Teamcenter.
- componentIndex - Variable in class nxopen.motion.GraphBuilder.CurveData
-
Deprecated.
Attribute component choice
- ComponentInfoData() - Constructor for class nxopen.display.IrayPlusMaterialEditorBuilder.ComponentInfoData
-
- componentInWorkset() - Method in interface nxopen.assemblies.Subset
-
- componentLayer() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Returns the layer for the new replacement part.
- componentLayerOptionType() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Returns the layer options
License requirements: None.
- componentLimitingSize() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the limiting size that defines the minimal allowed relative size of a connected component.
- componentLoadMethod() - Method in interface nxopen.LoadOptions
-
Returns the option indicating what method to use to determine where to
find component parts to load
License requirements: None.
- componentMatchMethod() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the component match option for automatic/manual component assignment.
- componentMatrix() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the component matrix.
- componentMemberSelect() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the component member select option
License requirements: None.
- componentName() - Method in interface nxopen.assemblies.AddComponentBuilder
-
Returns the component name for added components.
- componentName() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Returns the component name
License requirements: None.
- componentName() - Method in interface nxopen.cae.connections.ComponentData
-
Returns the component name
License requirements: None.
- componentName() - Method in interface nxopen.cam.RobotMountMove
-
Returns the component name
License requirements: cam_base ("CAM BASE")
.
- componentName() - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder
-
Returns the component name
License requirements: nx_layout ("NX Layout")
.
- componentName() - Method in interface nxopen.layout2d.DefineComponentBuilder
-
Returns the 2D Component Name defines the name for the new created definition
License requirements: None.
- componentName() - Method in interface nxopen.layout2d.MakeComponentUniqueBuilder
-
Returns the 2D Component Name defines the name for the new created definition
License requirements: None.
- componentName() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the simulation component name.
- ComponentName - Class in nxopen.routing
-
Describes whether or not a component associated with a Stock as Compoents Stock has
been renamed by the user with a permanent name using the ???
- componentName() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Returns the component name.
- ComponentNameBuilder - Interface in nxopen.layout2d
-
This class is used to construct the component name and part file name block, if it is in
manage mode, we also have item number, item revision and item name .
- componentNames - Variable in class nxopen.uf.UFAssem.UpgradeStatus
-
- componentNameType() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Returns the component name options
License requirements: None.
- ComponentNetwork - Interface in nxopen.positioning
-
Network for use in positioning components in NX.
- ComponentNetwork.ArrangementsMode - Class in nxopen.positioning
-
Specifies how changes in the network are applied to arrangements.
- ComponentOrder - Interface in nxopen.assemblies
-
- componentOrigin() - Method in interface nxopen.assemblies.CreateNewComponentBuilder
-
Returns the component origin
License requirements: None.
- ComponentPattern - Interface in nxopen.assemblies
-
Represents the component pattern class.
- ComponentPatternBuilder - Interface in nxopen.assemblies
-
- componentPatternBuilder() - Method in interface nxopen.tooling.AddReusablePart
-
Returns the current component pattern builder
License requirements: None.
- componentPatternBuilder() - Method in interface nxopen.tooling.FastenerAssy
-
Returns the current component pattern builder
License requirements: None.
- ComponentPatternCollection - Interface in nxopen.assemblies
-
Represents the collection object for all component patterns.
- componentPatterns() - Method in interface nxopen.assemblies.ComponentAssembly
-
The collection of
ComponentPattern
defined in the ComponentAssembly
Created in NX9.0.0
- componentPatternSet() - Method in interface nxopen.assemblies.ComponentPatternBuilder
-
- ComponentPositioner - Interface in nxopen.positioning
-
An instance of this class can be used to create
Constraint
s and
associated objects.
- ComponentQuantity - Class in nxopen.assemblies
-
Represents the component quantity type of the component
- componentreferenceset - Variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSetTypeData
-
- ComponentReferenceSetTypeData() - Constructor for class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSetTypeData
-
- components() - Method in interface nxopen.annotations.DefineTitleBlockBuilder
-
Returns the components, i.e. tags of selected entities such as tabular notes
License requirements: None.
- COMPONENTS - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.ClearanceBetweenEntity
-
- components() - Method in interface nxopen.assemblies.HideComponentBuilder
-
Returns the components to hide
License requirements: None.
- components() - Method in interface nxopen.assemblies.ShowComponentBuilder
-
Returns the components to show
License requirements: None.
- COMPONENTS - Static variable in class nxopen.blockstyler.SelectObject.FilterType
-
Filter to select all components
- components - Variable in class nxopen.cae.BaseResultType.AskComponentsData
-
- COMPONENTS - Static variable in class nxopen.cae.FreeBodyResultsBuilder.VectorDisplay
-
display individual components
- components - Variable in class nxopen.cae.ResultAccess.AskResultComponentsData
-
- COMPONENTS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide components
- components() - Method in interface nxopen.drawings.SecondaryGeometryInViewsBuilder
-
Returns the components
License requirements: None.
- components - Variable in class nxopen.features.shipdesign.ShipPreparationBuilder.FindShipComponentsData
-
The basic design part occurrences.
- components() - Method in interface nxopen.layout2d.ReparentComponentBuilder
-
Returns the select 2D Components to reparent the definitions
License requirements: None.
- components() - Method in interface nxopen.layout2d.ReplaceComponentBuilder
-
Returns the select 2D Components to replace the definitions
License requirements: None.
- components() - Method in interface nxopen.layout2d.SmashComponentBuilder
-
Returns the select 2D Component instances to smash
License requirements: None.
- COMPONENTS - Static variable in class nxopen.PartCleanup.CleanupParts
-
clean up the work part and
its components
- COMPONENTS - Static variable in class nxopen.routing.electrical.ElectricalFormat.Type
-
- components - Variable in class nxopen.uf.UFAssem.AskHiddenCompsData
-
- components - Variable in class nxopen.uf.UFAssem.AskIsetArrayData
-
- components - Variable in class nxopen.uf.UFAssem.AskMcArrayData
-
- components(double[], double[], double[], double) - Method in interface nxopen.uf.UFVec2
-
- COMPONENTS2D - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide 2d components
- componentsCollector() - Method in interface nxopen.mechanicalrouting.ConnectBuilder
-
Returns the selected components
License requirements: routing_base ("Routing Basic")
.
- componentsCollector() - Method in interface nxopen.mechanicalrouting.PipingComponentFileBuilder
-
Returns the selected components
License requirements: routing_pipetube ("Routing Piping and Tubing")
.
- componentsCreation() - Method in interface nxopen.features.DatumCsysBuilder
-
- ComponentsData() - Constructor for class nxopen.uf.UFVec2.ComponentsData
-
- componentSelection() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the component selection
License requirements: None.
- componentSelection() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the component selector
License requirements: None.
- componentSelection() - Method in interface nxopen.features.shipdesign.RemoveSplitBuilder
-
Returns the components, which has the split feature, to be removed.
- componentSelectionList() - Method in interface nxopen.assemblies.CreateOverridePartBuilder
-
Returns the list that contains components of reuse design element or subordinates
in which to create an empty override part.
- componentSelectionList() - Method in interface nxopen.assemblies.DeleteOverridePartBuilder
-
Returns the list that contains components of reuse design element or subordinates
of which override part is to be deleted.
- componentSettings() - Method in interface nxopen.layout2d.ComponentSettingsBlockBuilder
-
Returns the Component settings builder which stores the component settings
License requirements: None.
- componentSettings() - Method in interface nxopen.layout2d.EditComponentSettingsBuilder
-
Returns the 2D Component settings block builder which holds the component settings builder
License requirements: None.
- ComponentSettingsBlockBuilder - Interface in nxopen.layout2d
-
Represents the Component Settings Button (Layout2d.ComponentSettingsBlockBuilder)
Created in NX10.0.0
- ComponentSettingsBuilder - Interface in nxopen.layout2d
-
Represents a
ComponentSettingsBuilder
This builder stores the information of the 2D Component settings
Created in NX10.0.0
- componentsloaded - Variable in class nxopen.display.DynamicSectionBuilder.LoadAllIntersectingData
-
New component loaded flag
- componentsLoadOption - Variable in class nxopen.LoadOptions.BookmarkComponentsToLoadData
-
what components to load
- componentsprocessed - Variable in class nxopen.features.shipdesign.ShipPreparationBuilder.FindShipComponentsData
-
Indication if the part occurrence has already been processed.
- componentsToCopy() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Returns the components to copy
License requirements: nx_ship_detail ("Ship Detail Design")
.
- componentsToEditCollector() - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Returns the
RouteObjectCollector
that collects components to edit
License requirements: routing_base ("Routing Basic")
Created in NX12.0.0
- componentsToJoin() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the components that should be welded together.
- componentsToLoad() - Method in interface nxopen.LoadOptions
-
Returns the option indicating what component parts to load during part open.
- componentsToReplace() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Returns the objects to be replaced.
- componentsTreatAsUnit() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the components to treat as unit.
- ComponentSynthesis - Interface in nxopen.cae.qualityaudit
-
This action has as result a list of components and the connections using them.
- componenttype - Variable in class nxopen.cae.responsesimulation.CSDExcitationBuilder.CSDFunction
-
- componentType() - Method in interface nxopen.motion.MotionSensorBuilder
-
Returns the component type
License requirements: None.
- componentType() - Method in interface nxopen.tooling.AddReusablePart
-
Returns the current component type
License requirements: None.
- componentType() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the component type in mold or die project assembly.
- componentuniquename - Variable in class nxopen.display.IrayPlusMaterialEditorBuilder.AddComponentData
-
- compOrigin() - Method in interface nxopen.formboard.ObjectAttributeReferenceBuilder
-
Returns the comp origin
License requirements: routing_harness ("Routing Harness")
.
- composeHandle(String, int, int) - Method in interface nxopen.uf.UFTag
-
- Composer - Interface in nxopen.cae.connections
-
Composer.
- ComposerConnectionType - Class in nxopen.cae.connections
-
composer Connection type
- composerData() - Method in interface nxopen.cae.connections.Composer
-
Returns the composer data
License requirements: None.
- ComposerData - Interface in nxopen.cae.connections
-
Composer connection.
- COMPOSITE_CURVE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
An option to composite a curve via curve selection intent
- COMPOSITE_FACE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
An option to composite a body via face selection intent
- COMPOSITE_FRAME - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfFrameStyle
-
composite frame
- COMPOSITE_FRAME - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FrameStyleOptions
-
composite frame
- COMPOSITE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- CompositeBlock - Interface in nxopen.blockstyler
-
A composite block is a block that contains other blocks .
- CompositeCurve - Interface in nxopen.features
-
Represents a composite curve feature
To create or edit an instance of this class, use
CompositeCurveBuilder
Created in NX5.0.0
- compositeCurve() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the composite curve
License requirements: None.
- CompositeCurveBuilder - Interface in nxopen.features
-
- compositeCurveBuilder() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the composite curve builder
License requirements: None.
- CompositeCurveBuilder.JoinMethod - Class in nxopen.features
-
the join method
- CompositeCurveBuilder.PartType - Class in nxopen.features
-
Composite Curve part type.
- CompositeCurveBuilder.WaveLinkInformationData - Class in nxopen.features
-
- compositeFace() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the composite face
License requirements: None.
- compositeInsert() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the composite insert.
- compositeToleranceValueSource() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the GDT Composite Lower Tolerance Value Source
License requirements: None.
- COMPOUND - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Compound Weld command
- COMPOUND_DIE - Static variable in class nxopen.tooling.DieBaseBuilder.DieBaseTypeOpt
-
compound die type
- CompoundDatumReferenceBuilder - Interface in nxopen.annotations
-
- compoundGeometryRelationScope() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates what kind of 2d component relations are needed to recognize
License requirements: None.
- CompoundWeld - Interface in nxopen.weld
-
Represents a compound weld feature.
- CompoundWeldBuilder - Interface in nxopen.weld
-
- compoundWeldSize() - Method in interface nxopen.annotations.LineWeldDataBuilder
-
Returns the compound weld size
License requirements: None.
- compoundWeldSizeCode() - Method in interface nxopen.annotations.LineWeldDataBuilder
-
Returns the compound weld size letter code
License requirements: None.
- COMPRESSED_TIFF - Static variable in class nxopen.uf.UFDisp.ImageFormat
-
- compressFace() - Method in interface nxopen.weld.Extract
-
Compresses the size of weld linked face objects.
- CompressFlags() - Constructor for class nxopen.uf.UFPart.CompressFlags
-
- CompressFlags(boolean) - Constructor for class nxopen.uf.UFPart.CompressFlags
-
- COMPRESSION_ONLY - Static variable in class nxopen.motion.ConnectorBuilder.ApplicationDirection
-
Aplication direction: Compression Only
- COMPRESSION_SAFETY_FACTOR - Static variable in class nxopen.cae.Result.Quantity
-
- compressionSpringConstant(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the spring constant for a compression spring that exerts a force
when deformed to the length.
- compressionSpringConstantFromParam(double, double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the spring constant k for a compression spring from design parameters.
- compressionSpringDeformedLength(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the deformed length of a compression spring (with a known spring constant)
when loaded with a force.
- compressionSpringForce(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the force exerted by a compression spring (with a known spring constant)
when given the spring length before and after loading
License requirements: None.
- compressionSpringShearStressMaximum(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the maximum shear stress in the spring from the provided spring geometry.
- compressLabels(boolean, boolean, boolean) - Method in interface nxopen.cae.SimPart
-
Compress the labels of csys, physical, and groups
License requirements: nx_masterfem ("Finite Element Modeling")
.
- compressPart() - Method in interface nxopen.PartSaveOptions
-
Returns the option indicating whether solid data within part files
will be compressed as it is saved to disk
License requirements: None.
- comps - Variable in class nxopen.uf.UFRoute.AskHarnessCompsData
-
- compSel() - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
Returns the user selected component which has a CGM_FILE or PATTERN_FILE attribute defined.
- compSel() - Method in interface nxopen.formboard.FlipComponentBuilder
-
Returns the formboard component selected by user for flipping operation
License requirements: routing_harness ("Routing Harness")
.
- compSelect() - Method in interface nxopen.tooling.MoldProcessBuilder
-
Returns the component selected to be edited.
- compTimeValue - Variable in class nxopen.NXObject.AttributeInformation
-
Time/Date attribute value (the default value is returned when reading templates of non-set attributes).
- compType - Variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.EndCompensationData
-
Automatic/Angle/Distance/None
- ComputationalTime() - Constructor for class nxopen.NXObject.ComputationalTime
-
- ComputationalTime(int, int) - Constructor for class nxopen.NXObject.ComputationalTime
-
Constructor for the ComputationalTime object.
- computationScope() - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder
-
Returns the computation scope
License requirements: None.
- COMPUTE_TRIM_ANGLES - Static variable in class nxopen.tooling.DieEngDefineProductOrientationBuilder.ViewDraftOptions
-
- COMPUTE_WALL_ANGLES - Static variable in class nxopen.tooling.DieEngDefineProductOrientationBuilder.ViewDraftOptions
-
- COMPUTED - Static variable in class nxopen.weld.EdgePrepValuesBuilder.Option
-
Use the computed values as edge prep values.
- COMPUTED_ANGLE - Static variable in class nxopen.weld.WeldJointBuilder.SplitTypes
-
At angle computed from geometry and tables.
- computeDefaultPoints() - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Calculate default alignment points on existing sections.
- computeDraping() - Method in interface nxopen.cae.LaminatePly
-
Launch the draping algorithm, overriding previous results
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- computedSize() - Method in interface nxopen.annotations.Dimension
-
Returns the computed size of the dimension.
- computeFootCsys(HumanData.SideType) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Compute the Foot Csys according to solid, curve or sae data.
- computeHandCsys() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Compute the Csys of both hands according to solid, curve or sae data.
- ComputeHandCsysData() - Constructor for class nxopen.HumanPosturePredictionBuilder.ComputeHandCsysData
-
- computeMacs() - Method in interface nxopen.cae.CorrelSolution
-
Computes the Model Assurance Criterion (MAC) correlation metric for active modes
License requirements: nx_correl_base ("FE Correlation")
.
- ComputeMacsData() - Constructor for class nxopen.cae.CorrelSolution.ComputeMacsData
-
- computeModelBounds() - Method in interface nxopen.uf.UFDisp
-
- ComputeModelBoundsData() - Constructor for class nxopen.uf.UFDisp.ComputeModelBoundsData
-
- computeModePairsForSol() - Method in interface nxopen.cae.CorrelSolution
-
Compute mode pairs for correlation solution
License requirements: nx_correl_base ("FE Correlation")
.
- computeOffsetDirection() - Method in interface nxopen.features.OffsetCurveBuilder
-
To compute offset direction.
- computeOffsetDirection(ICurve, Point3d) - Method in interface nxopen.features.OffsetCurveBuilder
-
To compute offset direction on the seed entity at the given seed point.
- ComputeOffsetDirectionData() - Constructor for class nxopen.features.OffsetCurveBuilder.ComputeOffsetDirectionData
-
- computePlacementSolutions() - Method in interface nxopen.placement.PlacementEngineBuilder
-
Computes and returns the placement solutions
License requirements: None.
- computeSBend(Point3d, Point3d, Vector3d, Vector3d, double, int) - Method in interface nxopen.routing.SBendCornerCollection
-
Compute a S-Bend curve given input.
- computeSBendData(Point3d, Point3d, Vector3d, Vector3d, double, int) - Method in interface nxopen.routing.SBendCornerCollection
-
Compute a S-Bend parameters given input.
- ComputeSBendData() - Constructor for class nxopen.routing.SBendCornerCollection.ComputeSBendData
-
- computeStockLength(Tag) - Method in interface nxopen.uf.UFRoute
-
- computeZones() - Method in interface nxopen.cae.Laminate
-
Compute zones.
- computeZones() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Compute zones for all laminate properties in the model.
- CONC_ARCS - Static variable in class nxopen.cam.DmAmBuilder.AmCutPatternTypes
-
Concentric Arcs
- CONC_ARCS - Static variable in class nxopen.cam.DmBndBuilder.BndCutPatternTypes
-
Concentric Arcs
- concatenate(Point3d) - Method in interface nxopen.View
-
Concatenates the given translation with the previous viewing transformation
of the specified view.
- concatenate(double) - Method in interface nxopen.View
-
Concatenates the given scale with the previous viewing transformation
of the specified view.
- concatenate(Point3d, double) - Method in interface nxopen.View
-
Concatenates the given translation and scale with the previous viewing
transformation of the specified view.
- concatenate(Point3d, Vector3d, double) - Method in interface nxopen.View
-
Concatenates the given rotation with the previous viewing transformation
of the specified view.
- concatenate(Point3d, Point3d, Vector3d, double) - Method in interface nxopen.View
-
Concatenates the given translation and rotation with the previous viewing
transformation of the specified view.
- concatenate(double, Point3d, Vector3d, double) - Method in interface nxopen.View
-
Concatenates the given scale and rotation with the previous viewing
transformation of the specified view.
- concatenate(Point3d, double, Point3d, Vector3d, double) - Method in interface nxopen.View
-
Concatenates the given translation, scale and rotation with the previous
viewing transformation of the specified view.
- CONCAVE - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- CONCAVE - Static variable in class nxopen.annotations.SupplementarySymbol
-
Specifies concave supplementary weld symbol
- CONCAVE - Static variable in class nxopen.features.LabelChamferBuilder.ChamferOrientType
-
- CONCAVE - Static variable in class nxopen.weld.FilletBuilder.EnumContour
-
- CONCAVE - Static variable in class nxopen.weld.PlugSlotBuilder.EnumContour
-
- CONCAVE - Static variable in class nxopen.weld.WeldContourShape
-
Concave shape
- CONCAVE - Static variable in class nxopen.weld.WeldGrooveBuilder.Contour
-
- CONCAVE_FIRST - Static variable in class nxopen.features.EdgeBlendBuilder.OrderOfBlending
-
Concave first
- concaveCornerControl() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the corner concave
License requirements: cam_base ("CAM BASE")
.
- concaveCornerRadius() - Method in interface nxopen.die.AddSurfBuilder
-
Returns the concave corner radius value
License requirements: None.
- concaveCorners() - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
Returns the concave corners
License requirements: None.
- ConcaveFaces - Interface in nxopen.features
-
Represents a radius faces feature
To create or edit an instance of this class, use
ConcaveFacesBuilder
Created in NX7.5.0
- ConcaveFacesBuilder - Interface in nxopen.features
-
Represents a Concave Faces builder.
- ConcaveFacesBuilder.CalculatePointCurvatureData - Class in nxopen.features
-
- concaveRadius() - Method in interface nxopen.facet.CurvatureBuilder
-
Returns the concave radius threshold
License requirements: None.
- CONCENTRIC - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies concentric characteristics
- concentric() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the concentric infer-constraint setting.
- CONCENTRIC - Static variable in class nxopen.positioning.Constraint.Type
-
Two geometries share a center and plane
- CONCENTRIC - Static variable in class nxopen.Sketch.ConstraintType
-
- concentric() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the concentric
License requirements: None.
- CONCENTRIC - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- CONCENTRIC - Static variable in class nxopen.uf.UFSket.ConType
-
- concentric2dComponentEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add concentric 2d component relation recognition for the last curves added to curve collector
License requirements: None.
- CONCENTRIC_CIRCLE - Static variable in class nxopen.annotations.DimensionType
-
Concentric Circle dimension
- CONCENTRIC_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- CONCENTRIC_ZIG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Concentric Zig
- CONCENTRIC_ZIG_WITH_CONTOUR - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Concentric Zig with Contour
- CONCENTRIC_ZIG_WITH_STEPOVER - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Concentric Zig with Stepover
- CONCENTRIC_ZIG_ZAG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Concentric Zig Zag
- ConcentricCircleDimension - Interface in nxopen.annotations
-
Represents a concentric circle dimension
To create or edit an instance of this class, use
ThicknessDimensionBuilder
Created in NX4.0.0
- concentricEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add concentric relation recognition for the last curves added to curve collector
License requirements: None.
- CONCENTRICITY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
concentricity
- CONCENTRICITY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
concentricity
- CONCENTRICITY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Concentricity
- concentricSketchGroupEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add concentric relation recognition for the last curves added to curve collector
License requirements: None.
- CONCEPT_DESIGN - Static variable in class nxopen.tooling.QuickQuotationBuilder.Types
-
concept design type
- conceptDesign() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the concept design option.
- conceptDesign() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the value indicating if the design is for a concept.
- conceptDesign() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the value indicating if the design is for a concept.
- conceptDesign() - Method in interface nxopen.tooling.StandardPartBuilder
-
Returns the flag to indicate whether to add concept symbols instead of real standard parts.
- ConceptFromSpreadsheet - Interface in nxopen.features.shipdesign
-
- ConceptFromSpreadsheetBuilder - Interface in nxopen.features.shipdesign
-
- ConceptFromSpreadsheetBuilder.Type - Class in nxopen.features.shipdesign
-
Settings to indicate what type grid part generated.
- conceptObjects() - Method in interface nxopen.tooling.MoldProcessBuilder
-
Returns the concept objects selected to be edited.
- conceptPart() - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder
-
Returns the concept part file name
License requirements: None.
- ConceptPositionBuilder - Interface in nxopen.tooling
-
- ConceptPositionCollection - Interface in nxopen.tooling
-
Represents a collection of ConceptPosition
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- conceptPositions() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ConceptPositionCollection instance belonging to this part .
- CONCRETE - Static variable in class nxopen.annotations.AreaFillMaterial
-
Concrete
- CONCRETE - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
-
- CONCRETE - Static variable in class nxopen.uf.UFDrf.ValidMaterial
-
- CONCURRENT - Static variable in class nxopen.routing.DesignRuleViolationCollection.Mode
-
Executes design rules on all concurrently logged objects.
- ConcurrentDesignManagementBuilder - Interface in nxopen.tooling
-
- ConcurrentDesignManagementBuilder.Types - Class in nxopen.tooling
-
Specifies the types of concurrent design management.
- ConcurrentDesignManagementBuilder.UpdateTypes - Class in nxopen.tooling
-
Specifies the types of the update action.
- condemnLayoutViewEntities() - Method in interface nxopen.routing.electrical.CablewaysLayoutView
-
Condemns the layout view entities.
- condition() - Method in interface nxopen.cae.SimConditionTimeStep
-
Returns the Time Step condition
License requirements: None.
- condition() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the judging condition from current condition,the value can be 'And' or 'Or'
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- condition() - Method in interface nxopen.motion.PackagingMeasureBuilder
-
- CONDITION - Static variable in class nxopen.motion.ResultMeasure.InterferenceType
-
Result measure for interference condition
- condition() - Method in interface nxopen.sim.Breakpoint
-
Returns the condition for a breakpoint.
- condition - Variable in class nxopen.uf.UFFltr.AskFilterData
-
- Condition - Interface in nxopen.visualreporting
-
A Condition within a
Rule
.
- Condition.OperatorOption - Class in nxopen.visualreporting
-
Represents the possible operator type options.
- Condition.TypeOption - Class in nxopen.visualreporting
-
Represents the possible type options
for a
Condition
.
- ConditionalElementRevision - Interface in nxopen.pdm
-
Represents a base class that provides common methods for various conditional model elements in a
CollaborativeDesign
.
- conditionCollection() - Method in interface nxopen.cae.SimConditionSeqMgr
-
- conditionId() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the id of condition
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- conditionList() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the condition data
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- conditionName - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- conditionOption() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
Returns the condition type.
- conditionParamCollection() - Method in interface nxopen.cae.SimConditionSeqMgr
-
- conditions() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Returns the object condition ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- conditions() - Method in interface nxopen.ame.OperandRuleBuilder
-
Returns the object condition ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- conditions() - Method in interface nxopen.ame.OperatorRuleBuilder
-
Returns the conditions block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- CONDITIONS - Static variable in class nxopen.ame.PlcDataType
-
- ConditionsBuilder - Interface in nxopen.ame
-
JA class for the conditions dialog .
- conditionSeqManager() - Method in interface nxopen.cae.SimSimulation
-
Returns the Condition Sequence Manager
License requirements: None.
- conditionSequenceCollection() - Method in interface nxopen.cae.SimConditionSeqMgr
-
- conditionTag - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- conditionTimeStepCollection() - Method in interface nxopen.cae.SimConditionSequence
-
- conditionValue() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
Returns the condition value.
- conditionValue() - Method in interface nxopen.mechatronics.GanttOperationConditionBuilder
-
Returns the condition value use to evaluate this condition for the selected property in condition object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- CONDUCTANCE_PER_LENGTH - Static variable in class nxopen.cae.Result.Quantity
-
- CONDUCTIVE_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- conductorCount() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the count of conductors.
- conductorSpacing() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the conductor spacing.
- conductorWidth() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the conductor width.
- CONE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Cone
- CONE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Cone Feature
- CONE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Cone
- Cone - Interface in nxopen.features
-
Represents a cone feature
To create or edit an instance of this class, use
ConeBuilder
Created in NX6.0.0
- CONE - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.AlignFillerSurfaceType
-
Generalized conical developable surface.
- CONE - Static variable in class nxopen.linedesigner.ColumnFeatureBuilder.ColumnBaseType
-
- CONE - Static variable in class nxopen.linedesigner.ColumnGridEquipmentBuilder.ColumnBaseType
-
- CONE - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Cone
- CONE - Static variable in class nxopen.weld.DatumCommonBuilder.SolidTypes
-
Datum solid will be a cone
- CONE_ANGLE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Angle of Cone
- CONE_DIAMETER - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Creates a circle at diameter of a cone
- CONE_DISTANCE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Creates a circle at distance along a cone
- CONE_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- CONE_TOP_TYPE - Static variable in class nxopen.uf.UFModl.SmpunchTopType
-
- coneAngle() - Method in interface nxopen.display.LightBuilder
-
Returns the cone angle - only applicable to spot light types
License requirements: None.
- coneAngle - Variable in class nxopen.uf.UFView.LightAttributes
-
- ConeBuilder - Interface in nxopen.features
-
Represents a builder for a cone feature.
- ConeBuilder.Types - Class in nxopen.features
-
Represents the Cone type
- conectionOffset() - Method in interface nxopen.linedesigner.ConnectionCreatorBuilder
-
Returns the connection offset
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- conectionType() - Method in interface nxopen.linedesigner.ConnectionCreatorBuilder
-
Returns the current connection type
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- coneDepth - Variable in class nxopen.uf.UFModl.SmpunchData
-
- conehead(int, double[], double[], int) - Method in interface nxopen.uf.UFDisp
-
- ConeheadAttrbSTag() - Constructor for class nxopen.uf.UFDisp.ConeheadAttrbSTag
-
- ConeheadAttrbSTag(double, double, double, int, int, int) - Constructor for class nxopen.uf.UFDisp.ConeheadAttrbSTag
-
- coneIndex() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the cone index.
- coneRadius - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
-
- confidenceLevel() - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
Returns the confidence level (in %)
License requirements: None.
- confidenceLevelOption() - Method in interface nxopen.cae.LaminateRandomEventBuilder
-
Returns the confidence level option
License requirements: None.
- config - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
the configuration index
- configAttribute() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns
the configure attribute, which is read from the design environment by the settings in
the configuration XML file.
- configDetail() - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
Returns the configuration detail
License requirements: None.
- configFile() - Method in interface nxopen.features.shipdesign.FrameBarOutBuilder
-
Returns the config file name.
- configFile() - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder
-
Returns the XML confiuration file
License requirements: None.
- configFile() - Method in interface nxopen.JtCreator
-
Returns the ConfigFile file - the name of configuration file which used in translation
License requirements: None.
- configMode() - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
Returns the configuration mode
License requirements: None.
- configName() - Method in interface nxopen.cae.PreTestExciterConfig
-
Returns the exciter selection configuration name
License requirements: None.
- configRules - Variable in class nxopen.uf.UFUgmgr.ListConfigRulesData
-
- configType() - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
Returns the configuration type
License requirements: None.
- configuration() - Method in interface nxopen.cam.RobotCartesianMove
-
Returns the Configuration
License requirements: cam_base ("CAM BASE")
.
- configuration() - Method in interface nxopen.tooling.InitProjectBuilder
-
Returns the configuration access functions
License requirements: None.
- configurationContext() - Method in interface nxopen.assemblies.SubsetBuilder
-
Returns the configuration context builder.
- configurationContext() - Method in interface nxopen.pid.DesignContextBuilder
-
Returns the configuration context builder.
- ConfigurationContextBuilder - Interface in nxopen.pdm
-
- ConfigurationContextBuilder.ConfigContextMode - Class in nxopen.pdm
-
configuration mode
- ConfigurationContextBuilder.ConfigContextType - Class in nxopen.pdm
-
configuration type
- ConfigurationContextBuilder.ConfigurationDetail - Class in nxopen.pdm
-
configuration detail
- configurationFile() - Method in interface nxopen.cam.Preferences
-
Returns the configuration file
License requirements: None.
- configurationFile() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
Returns the configuration file browser
License requirements: None.
- configurationFile() - Method in interface nxopen.drawings.ConvertDraftingContentsBuilder
-
Returns the configuration file
License requirements: None.
- ConfigurationFloatParameter - Interface in nxopen.motion
-
- ConfigurationIntegerParameter - Interface in nxopen.motion
-
- ConfigurationManager - Interface in nxopen.pdm
-
- configurationManager() - Method in interface nxopen.Session
-
- configurationName() - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
Returns the external signal configuration name.
- ConfigurationParameter - Interface in nxopen.motion
-
- ConfigurationParameterList - Interface in nxopen.motion
-
Represents a list of objects.
- configurationParametersList() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the configuration/watch parameters list
License requirements: mechanisms ("MECHANISMS")
.
- configurationPart() - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
Returns the external signal configuration part.
- ConfigurationTextParameter - Interface in nxopen.motion
-
- configurationVariables() - Method in interface nxopen.cae.PostScenarioSelectionParameters
-
- CONFIGURE_ALL_REVISIONS - Static variable in class nxopen.uf.UFUgmgr.RevConfigOptions
-
- CONFIGURE_BY_REV_RULE - Static variable in class nxopen.uf.UFUgmgr.RevConfigOptions
-
- CONFIGURE_LATEST - Static variable in class nxopen.uf.UFUgmgr.RevConfigOptions
-
- CONFIGURE_NONE - Static variable in class nxopen.uf.UFUgmgr.RevConfigOptions
-
- configureContextMenu(ContextMenu, ContextMenuProperties) - Method in interface nxopen.menubar.MenuBarManager.ConfigureContextMenu
-
Prototype for the callback used to configure a context menu.
- CONFIGURED - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode
-
CONFIGURED
- configureMemoryAreas(NXObject) - Method in interface nxopen.ame.AMEManager
-
Creates memory areas and memory records for given product definition
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ConfigureResultTableBuilder - Interface in nxopen.ame
-
- confirmUndo() - Method in interface nxopen.preferences.SessionUserInterfaceUI
-
Returns the confirm undo flag
License requirements: None.
- confirmWarningMessages() - Method in interface nxopen.weld.WeldImportBuilder
-
Returns the option to indicate if warning messages need to be confirmed.
- CONFLICTING_WITH_WAVE - Static variable in class nxopen.positioning.Constraint.SolverStatus
-
The constraint has been suppressed because it's conflicting with WAVE
- conflictingBcCount() - Method in interface nxopen.cae.SimSolution
-
Returns the number of conflicting BC pairs in this solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- ConflictingBcPairByIndexData() - Constructor for class nxopen.cae.SimSolution.ConflictingBcPairByIndexData
-
- conflictingColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch conflicting color
License requirements: None.
- ConflictingConstraintPairByIndexData() - Constructor for class nxopen.cae.SimSolution.ConflictingConstraintPairByIndexData
-
- conflictingConstraintsCount() - Method in interface nxopen.cae.SimSolution
-
- conflictLogicalObject() - Method in interface nxopen.mechatronics.ComparisonResult
-
Returns the conflict logical object from the comparison result
License requirements: None.
- ConflictResolutionBuilder - Interface in nxopen.cae
-
- ConflictResolutionBuilder.Rule - Class in nxopen.cae
-
Conflict Resolution Rule
- CONFORMAL_GRAPH - Static variable in class nxopen.features.LatticeBuilder.LatticeTypes
-
- conformToSurface() - Method in interface nxopen.annotations.RegionBuilder
-
- ConGeom() - Constructor for class nxopen.uf.UFSket.ConGeom
-
- ConGeom(Tag, UFSket.GeomVertex, int, UFSket.HelpType, double[], double) - Constructor for class nxopen.uf.UFSket.ConGeom
-
- conGeoms - Variable in class nxopen.uf.UFSket.ReadGeometricConstraintData
-
- conic() - Method in interface nxopen.cae.MeshPointConicCenterBuilder
-
Returns the node
License requirements: None.
- Conic - Interface in nxopen
-
Represents a conic curve.
- CONIC - Static variable in class nxopen.features.BridgeCurveBuilder.ShapeControlTypes
-
Deprecated.
conic parameter
- CONIC - Static variable in class nxopen.features.BridgeCurveBuilderEx.ShapeControlMethods
-
Shape using rho value of a conic.
- CONIC - Static variable in class nxopen.features.EdgeBlendBuilder.Section
-
Conical shaped blends
- CONIC - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
-
this means tangent continuous asymmetric conic type
- CONIC - Static variable in class nxopen.features.SectionSurfaceBuilder.UDegreeEnum
-
Deprecated.
conic in u
- CONIC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.Types
-
Conic type
- CONIC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.UDegreeType
-
conic in u
- CONIC - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Conic
- Conic() - Constructor for class nxopen.uf.UFCurve.Conic
-
- Conic(Tag, int, double, double, double, double[], double, double) - Constructor for class nxopen.uf.UFCurve.Conic
-
- CONIC - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
-
- Conic.OrientationData - Class in nxopen
-
- CONIC_ANCHOR - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point at conic anchor
- CONIC_ANCHOR_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- CONIC_AUTO_RHO - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
-
- CONIC_SYMMETRIC - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
-
this means tangent continuous symmetric conic type
- CONICAL - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
-
- CONICAL - Static variable in class nxopen.die.QuickBinderBuilder.Types
-
conical
- CONICAL - Static variable in class nxopen.die.QuickBinderWrapBuilder.Types
-
Conical
- CONICAL - Static variable in class nxopen.Face.FaceType
-
Conical face
- CONICAL - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType
-
Conical face
- conicalCurveProfile() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
Returns the conical curve profile.
- conicalCurveProfile() - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
Returns the conical curve profile.
- conicalDamping - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- conicalExpression() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
- conicalExpression() - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
Returns the conical expression type
License requirements: None.
- conicalFunction() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
- conicalFunction() - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
Returns the conical function type
License requirements: None.
- conicalStiffness - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- conicalType() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
Returns the conical coefficient type
License requirements: None.
- conicalType() - Method in interface nxopen.motion.BushingSphericalCoefficientsComponent
-
Returns the conical coefficient type
License requirements: None.
- conicCrossSection() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the face blend conic section
License requirements: None.
- ConicCrossSection - Interface in nxopen.geometricutilities
-
Represents a conic section data for face blend.
- ConicCrossSection.DefineMethod - Class in nxopen.geometricutilities
-
This enum represents the conic method for advanced symmetric conic
- ConicCrossSection.DepthMethod - Class in nxopen.geometricutilities
-
This enum represents the depth option
- ConicCrossSection.OffsetMethod - Class in nxopen.geometricutilities
-
This enum represents the offset options
- ConicCrossSection.RhoMethod - Class in nxopen.geometricutilities
-
This enum represents the rho options
- ConicCrossSection.ShapeSkewMethod - Class in nxopen.geometricutilities
-
This enum represents the shape skew option
- conicData - Variable in class nxopen.uf.UFCurve.ConvertConicToStdData
-
- conicmethod - Variable in class nxopen.features.EdgeBlendBuilder.ChainsetAndSectionValueData
-
The conic method of this chain set collector
- conicMethod() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the conic method for the advanced symmetric conic section with face blend
License requirements: None.
- conicPrefix - Variable in class nxopen.uf.UFSket.AskPreferencesData
-
- conicType - Variable in class nxopen.uf.UFCurve.Conic
-
- conicTypeMode() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the conic type mode.
- CONJUGATE - Static variable in class nxopen.cae.AfuMathOperation.MultiType
-
Conjugates AFU records
- CONJUGATE - Static variable in class nxopen.die.AddendumSectionBuilder.SectionOrientationType
-
Use conjugate orientation.
- CONJUGATE_GRADIENT - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationAlgorithmType
-
Conjugate gradient
- CONN_ANY - Static variable in class nxopen.ame.PlcDataType
-
- CONN_OUC - Static variable in class nxopen.ame.PlcDataType
-
- CONN_PRG - Static variable in class nxopen.ame.PlcDataType
-
- CONN_RID - Static variable in class nxopen.ame.PlcDataType
-
- connect(String, String, String) - Method in interface nxopen.issue.IssueManager
-
Connects to issue server and returns the
IssueSite
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- CONNECT - Static variable in class nxopen.linedesigner.ConnectionCreatorBuilder.ConnectionType
-
- connect() - Method in interface nxopen.routing.Port
-
Finds another
Port
to connect this port to.
- CONNECT_LINEAR - Static variable in class nxopen.cam.BoundaryTurnMemberSet.ConcaveCornersTypeValue
-
- ConnectableElement - Interface in nxopen.diagramming
-
Represents the ConnectableElement class.
- ConnectableElementBuilder - Interface in nxopen.diagramming
-
Represents a ConnectableElementBuilder.
- connectableProxyObjectType() - Method in interface nxopen.ame.PortBuilder
-
Returns the connectable object type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- connectAngle() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the connect angle of stiffener by support in degrees, negative value is not allowed
License requirements: None.
- connectAngle() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the connect angle of stiffener by support in degrees, negative value is not allowed
License requirements: None.
- ConnectBuilder - Interface in nxopen.mechanicalrouting
-
- connectCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Accepts connect curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- connectCurves() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the connect curves
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- connectDynamic(Expression) - Method in interface nxopen.ame.ObjectConnectionBuilder
-
Create a new dynamic connection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- CONNECTED - Static variable in class nxopen.ApparentChainingRuleType
-
Connected Curves
- CONNECTED - Static variable in class nxopen.features.shipdesign.EdgeReinforcementBuilder.EndCutTypes
-
- CONNECTED - Static variable in class nxopen.features.shipdesign.EndCutBuilder.ConnectionTypes
-
If this Connection Type is set, the offset parameter will be ignored.
- CONNECTED - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.EndCutTypes
-
- CONNECTED - Static variable in class nxopen.features.VarOffsetFaceBuilder.Continuity
-
- CONNECTED - Static variable in class nxopen.FollowFilletRuleType
-
Connected Curves
- CONNECTED - Static variable in class nxopen.sim.IsvControlPanelBuilder.VncMode
-
CONNECTED
- connected - Variable in class nxopen.uf.UFRoute.AskPortConnectedPortData
-
- CONNECTED_ELEMENTSIN_SEED_MESH - Static variable in class nxopen.cae.modelcheck.AlignShellElementFirstEdgeBuilder.ElemSelectionMode
-
- CONNECTED_TO_COMPONENTS - Static variable in class nxopen.assemblies.ConstraintDisplayBuilder.VisibleConstraintsRuleOptions
-
Show only constraints that refer at least once to a selected component
- CONNECTED_TO_SELECTED_COMPONENTS - Static variable in class nxopen.positioning.ComponentConstraintGroup.ConstraintsCollectionType
-
- connectedcompNodes - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupErrorCodes
-
returns error code for nodes connected across assembly components
- connectedcompNodes - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupTypes
-
true if nodes that are connected across components are to be grouped
- connectedcompSeed - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames
-
prefix seed name for auto groups grouped if across connected assembly component
- ConnectedCurvesBuilder - Interface in nxopen.routing
-
Builder for creating automatically creating segments on end-to-end connected
curves.
- ConnectedFaceFinderBuilder - Interface in nxopen.weld
-
Represents a builder to run the Connected Face Finder operation.
- connectedObject() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
Returns the object that the end point of this path transition connects to.
- ConnectedObjectsEvaluatorBuilder - Interface in nxopen.ame
-
- connectedPanelType() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the number of connected panels at a point.
- ConnectedPart - Interface in nxopen.weld
-
Represents weld connected part to customize the retrieval of connected part information.
- connectedPartAttrToggle() - Method in interface nxopen.weld.ExportWeldBuilder
-
Returns the connected part attribute toggle to control if read connected part attributes from weld points
License requirements: ugweld ("UG WELD")
.
- connectedPartMethod() - Method in interface nxopen.weld.TransformBuilder
-
Returns the method used to find connected parts
License requirements: ugweld ("UG WELD")
.
- connectedPartTolerance() - Method in interface nxopen.weld.TransformBuilder
-
Returns the expression containing the value of the connected part tolerance.
- connectedPort - Variable in class nxopen.uf.UFRoute.AskPortConnectedPortData
-
- connectedPort - Variable in class nxopen.uf.UFRoute.AskPortConnPortData
-
- connectedport1 - Variable in class nxopen.routing.Port.ConnectedPortsData
-
- connectedport2 - Variable in class nxopen.routing.Port.ConnectedPortsData
-
- connectedports1 - Variable in class nxopen.mechanicalrouting.ConnectivityService.ConnectedPortsData
-
- connectedports2 - Variable in class nxopen.mechanicalrouting.ConnectivityService.ConnectedPortsData
-
- ConnectedPortsData() - Constructor for class nxopen.mechanicalrouting.ConnectivityService.ConnectedPortsData
-
- ConnectedPortsData() - Constructor for class nxopen.routing.Port.ConnectedPortsData
-
- connectedToInformation() - Method in interface nxopen.weld.InformationBuilder
-
Returns the option to specify if the connected to information should be displayed in the output.
- connectFix() - Method in interface nxopen.ame.ObjectConnectionBuilder
-
Create a new fix connection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- connectingOnlyOnePart() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns
License requirements: ugweld ("UG WELD")
.
- CONNECTION - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Connection
- connection() - Method in interface nxopen.cae.qualityaudit.ConnectionPointsDistanceResult
-
Returns the connection.
- connection() - Method in interface nxopen.cae.qualityaudit.FreeEdgeDistanceResult
-
Returns the connection with points close to the edge
License requirements: None.
- connection() - Method in interface nxopen.cae.qualityaudit.ListConnectionsResult
-
Returns the connection.
- connection() - Method in interface nxopen.cae.qualityaudit.ListNonModeledConnectionsResult
-
Returns the connection not being modeled
License requirements: None.
- CONNECTION - Static variable in class nxopen.cae.qualityaudit.Manager.ActionType
-
Connection related actions
- connection() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedElementCreationResult
-
Returns the connection with the failed element creation
License requirements: None.
- connection() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedProjectionResult
-
Returns the connection with the failed mesh projection
License requirements: None.
- connection() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedProjectionToleranceResult
-
Returns the connection with the failed mesh tolerance projection
License requirements: None.
- connection() - Method in interface nxopen.cae.qualityaudit.ObjectLevelCorrectedProjectionResult
-
Returns the connection with the corrected projection
License requirements: None.
- connection() - Method in interface nxopen.cae.qualityaudit.ObjectLevelFailedProjectionResult
-
Returns the connection with the failed projection
License requirements: None.
- connection() - Method in interface nxopen.cae.qualityaudit.ObjectLevelFailedProjectionToleranceResult
-
Returns the connection with the failed tolerance projection
License requirements: None.
- Connection - Interface in nxopen.diagramming
-
Represents the Connection class.
- connection - Variable in class nxopen.pid.OffSheetConnectorBuilder.ConnectionData
-
- connection() - Method in interface nxopen.pid.PreferencesBuilder
-
Returns the preferences connection builder
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
- CONNECTION - Static variable in class nxopen.routing.CustomManager.NavigatorType
-
The objects were selected in the connection navigator.
- Connection - Interface in nxopen.routing.electrical
-
The electrical usage of a
LogicalConnection
, restricted to
one From and one To terminal.
- CONNECTION - Static variable in class nxopen.routing.RouteManager.FindObjectType
-
- Connection.RouteLevel - Class in nxopen.routing.electrical
-
Routing level.
- ConnectionBuilder - Interface in nxopen.diagramming
-
Represents a ConnectionBuilder.
- ConnectionCollection - Interface in nxopen.diagramming
-
Represents a collection of connection.
- ConnectionCollection - Interface in nxopen.routing.electrical
-
- ConnectionCreatorBuilder - Interface in nxopen.linedesigner
-
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createConnectionCreatorBuilder
Default values.
- ConnectionCreatorBuilder.ConnectionType - Class in nxopen.linedesigner
-
This enum is providing possible connection types
- ConnectionData - Interface in nxopen.cae.connections
-
Composer connection.
- ConnectionData() - Constructor for class nxopen.pid.FlowDirectionArrowBuilder.ConnectionData
-
- ConnectionData() - Constructor for class nxopen.pid.OffSheetConnectorBuilder.ConnectionData
-
- connectionDBData() - Method in interface nxopen.cae.connections.Composer
-
Returns the connection db data
License requirements: None.
- ConnectionDBData - Interface in nxopen.cae.connections
-
Connection DB data.
- ConnectionDBItemData - Interface in nxopen.cae.connections
-
Connection DB item data.
- ConnectionDBItemStiffnessType - Class in nxopen.cae.connections
-
connection DB item stiffness type
- ConnectionDistanceCheck - Interface in nxopen.cae.qualityaudit
-
This action checks the distance between connections.
- ConnectionDistanceResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit ConnectionPointsDistanceResult is a class containing information about failed distance between connection distance checks on universal connections.
- connectionElementCollection() - Method in interface nxopen.cae.BaseFEModel
-
Return the
Element
collection of this object
Created in NX11.0.0
- ConnectionElementRevision - Interface in nxopen.pdm
-
Represents a base class that provides common methods for various model elements in a
CollaborativeDesign
.
- ConnectionEndType - Class in nxopen.pid
-
Represents the connection end type.
- connectionFinder() - Method in interface nxopen.weld.ConnectedFaceFinderBuilder
-
Returns the connection finder object that manages the interaction.
- ConnectionFinderBuilder - Interface in nxopen.weld
-
Represents a builder to display, manage, delete, and allow the user to
reparent face information for the weld objects.
- ConnectionFinderBuilder.FilterTypes - Class in nxopen.weld
-
Filter values to control "Save All" processing.
- connectionid - Variable in class nxopen.pid.EquipmentBuilder.InlineSymbolLocationData
-
- connectionid - Variable in class nxopen.pid.EquipmentBuilder.NewInlineConnectionData
-
- connectionid - Variable in class nxopen.pid.FlowDirectionArrowBuilder.ConnectionData
-
- connectionid - Variable in class nxopen.pid.OffSheetConnectorBuilder.ConnectionData
-
- connectionid - Variable in class nxopen.pid.PipeBuilder.NewStartTeeConnectionData
-
- connectionid - Variable in class nxopen.pid.PipeBuilder.StartTeeLocationData
-
- ConnectionInformationData() - Constructor for class nxopen.mechatronics.TCPClientBuilder.ConnectionInformationData
-
- ConnectionInformationData() - Constructor for class nxopen.mechatronics.TCPSignalServerBuilder.ConnectionInformationData
-
- ConnectionInformationData() - Constructor for class nxopen.mechatronics.UDPSignalClientBuilder.ConnectionInformationData
-
- ConnectionInformationData() - Constructor for class nxopen.mechatronics.UDPSignalServerBuilder.ConnectionInformationData
-
- connectionLabelHorizontalOffsetPosition() - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
Returns the horizontal position of the connection tag.
- connectionLabelOffset() - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
Returns the gap between the connection and the tag.
- connectionLabelPositionCenter() - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
Returns the tag is displayed at the center of the connection.
- connectionLabelVerticalOffsetPosition() - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
Returns the vertical position of the connection tag.
- connectionList() - Method in interface nxopen.mechatronics.ExternalConnectionBuilder
-
Returns the connection element list.
- connectionList() - Method in interface nxopen.mechatronics.SignalMappingBuilder
-
Returns the signal mapping connection builder list.
- ConnectionLocationBuilder - Interface in nxopen.diagramming
-
Represents a ConnectionLocationBuilder.
- ConnectionLocationBuilderList - Interface in nxopen.diagramming
-
Represents a list of objects.
- connectionName() - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilder
-
Returns the connection name.
- ConnectionNamesData() - Constructor for class nxopen.mechatronics.TCPClientBuilder.ConnectionNamesData
-
- ConnectionNamesData() - Constructor for class nxopen.mechatronics.UDPSignalClientBuilder.ConnectionNamesData
-
- connectionone - Variable in class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketBetweenFlangesData
-
One of the new gasket flange connections
- connectionone - Variable in class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketData
-
One of the new gasket flange connections
- connectionPoint - Variable in class nxopen.uf.UFDrf.SymbolConnection
-
- ConnectionPointsDistanceCheck - Interface in nxopen.cae.qualityaudit
-
This action checks the distance between connection's definition points.
- ConnectionPointsDistanceResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit ConnectionPointsDistanceResult is a class containing information about failed distance between connection points checks on universal connections.
- connectionPointsPath() - Method in interface nxopen.cae.connections.ComponentData
-
Returns the connection points path
License requirements: None.
- connections() - Method in interface nxopen.diagramming.DiagrammingManager
-
- CONNECTIONS - Static variable in class nxopen.routing.electrical.ElectricalFormat.Type
-
- connections - Variable in class nxopen.uf.UFDrf.CustomSymbol
-
- connectionsContainer() - Method in interface nxopen.cae.IFEModel
-
Returns the universal connection container.
- connectionsRootFolder() - Method in interface nxopen.cae.BaseFEModel
-
- connectionString() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the connection string
License requirements: None.
- connectiontwo - Variable in class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketBetweenFlangesData
-
The other new gasket flange connection
- connectiontwo - Variable in class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketData
-
The other new gasket flange connection
- connectionType() - Method in interface nxopen.ame.ParameterRuleBuilder
-
Returns the connection type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- connectionType() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the connection type
License requirements: None.
- ConnectionType - Class in nxopen.cae.connections
-
Connection type
- connectionType() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the connection type.
- connectionType() - Method in interface nxopen.pid.Port
-
Returns the connection type of the port.
- connectionType - Variable in class nxopen.uf.UFDrf.SymbolConnection
-
- connectiontypesone - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionCompatibilitiesData
-
Values for the first CONNECTION_TYPE attribute.
- connectiontypestwo - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionCompatibilitiesData
-
Values for the second CONNECTION_TYPE attribute.
- connectionUtils() - Method in interface nxopen.cae.connections.Folder
-
Returns a
Utils
instance
Created in NX12.0.0
- ConnectivityCheck - Interface in nxopen.cae.qualityaudit
-
This action's output is a list of connected groups together with the involved connections.
- ConnectivityDefinition - Interface in nxopen.routing
-
The base class for various connection objects.
- ConnectivityService - Interface in nxopen.mechanicalrouting
-
- connectivityService() - Method in interface nxopen.mechanicalrouting.RoutingManager
-
- ConnectivityService.ConnectedPortsData - Class in nxopen.mechanicalrouting
-
- connectMember() - Method in interface nxopen.cam.BoundaryMemberSet
-
Returns the connect member
License requirements: None.
- connectOneToOne(NXObject[], NXObject[], boolean) - Method in interface nxopen.ame.BulkConnectionBuilder
-
Make the Connection between the source and target ports
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- connectOneVsMany(NXObject[], NXObject[], boolean) - Method in interface nxopen.ame.BulkConnectionBuilder
-
Make the Connection between 1 port of N cardinality and Many ports of 1 cardinality
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- CONNECTOR - Static variable in class nxopen.cae.Result.GroupContainer
-
- CONNECTOR - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
ConnectorDevice object which
has a type of connector.
- Connector - Interface in nxopen.motion
-
Represents a connector
This is an abstract class, and cannot be created.
- CONNECTOR - Static variable in class nxopen.routing.electrical.ConnectorDevice.ComponentType
-
- CONNECTOR - Static variable in class nxopen.routing.RouteManager.FindObjectType
-
- CONNECTOR - Static variable in class nxopen.routing.RouteManager.PartType
-
- CONNECTOR_NODE - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- ConnectorBuilder - Interface in nxopen.motion
-
Represents ConnectorBuilder
This is an abstract class, and cannot be created.
- ConnectorBuilder.ApplicationDirection - Class in nxopen.motion
-
Definitions of application direction
- ConnectorBuilder.AttachmentType - Class in nxopen.motion
-
Definitions of connector attachment type
- ConnectorCoefficientTypes - Class in nxopen.motion
-
Definitions of connector coefficient type
- connectorCompatibleTypeName() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
Returns the connector compatible type name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- ConnectorDevice - Interface in nxopen.routing.electrical
-
The Electrical ConnectorDevice corresponds to a connector instance of
SingleDevice
.
- ConnectorDevice.Assign - Class in nxopen.routing.electrical
-
Assignment method
- ConnectorDevice.ComponentType - Class in nxopen.routing.electrical
-
Component type
- ConnectorDevice.FindPlacerData - Class in nxopen.routing.electrical
-
- ConnectorDeviceCollection - Interface in nxopen.routing.electrical
-
- connectorDevices() - Method in interface nxopen.routing.RouteManager
-
ConnectorDevice collection .
- connectorDirection() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
Returns the connector direction
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- connectorName() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
Returns the connector name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- connectorParallelToObjectDirection() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
Returns the connector parallel to object direction
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- connectorPoint() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
Returns the connector point
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- connectorSize() - Method in interface nxopen.linedesigner.ResizeConnectorBuilder
-
Returns the current connector size
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- connectorType() - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Returns the connector type.
- connectorTypeName() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
Returns the connector type name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- connectPart() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the option of connecting only one part.
- connectPartPorts(Component) - Method in interface nxopen.routing.RouteManager
-
- ConnectPathBuilder - Interface in nxopen.routing
-
- connectPort(Tag) - Method in interface nxopen.uf.UFRoute
-
- ConnectProfileParentBuilder - Interface in nxopen.die
-
Represents a Die Connecting Profile sub feature.
- ConnectProfileParentBuilder.ProfileData - Class in nxopen.die
-
- connectProfilesParent() - Method in interface nxopen.die.SteelInsertBuilder
-
Returns the connecting profiles parent builder of the diesteelinsert
License requirements: ug_die_design ("Die Design")
.
- connectstring - Variable in class nxopen.pdm.PdmSession.TcserverSettingsData
-
the connection string
- connectToLibraryItemBuilder(Part, InterfaceMemberPort) - Method in interface nxopen.ame.AMEManager
-
Creates a connect to library item builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- ConnectToLibraryItemBuilder - Interface in nxopen.ame
-
- connectURL() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Simit Connect URL string
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- connectVector() - Method in interface nxopen.tooling.CoolingConnectBuilder
-
Returns the vector specified for creating connecting channel.
- connectViaExpression(Expression) - Method in interface nxopen.ame.AMEPort
-
Connect given ports via expression
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- connectViewport(int) - Method in interface nxopen.cae.ViewportSynchronizationOptions
-
The given viewport will now react to selections in other viewports.
- conNum - Variable in class nxopen.uf.UFSket.AskConstraintsOfGeometryData
-
- conNum - Variable in class nxopen.uf.UFSket.AskGeoConsOfGeometryData
-
- CONS_ASSOC_OFFSET - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_ASSOC_OFFSET - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_ASSOC_TRIM - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_ASSOC_TRIM - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_COINCIDENT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_COINCIDENT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_COLLINEAR - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_COLLINEAR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_CONCENTRIC - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_CONCENTRIC - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_CONSTANT_ANGLE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_CONSTANT_ANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_CONSTANT_LENGTH - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_CONSTANT_LENGTH - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_EQUAL_LENGTH - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_EQUAL_LENGTH - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_EQUAL_RADIUS - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_EQUAL_RADIUS - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_FIX - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_FIX - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_HORIZONTAL - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_HORIZONTAL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_MIDPOINT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_MIDPOINT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_MIRROR - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_MIRROR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_NON_UNIFORM_SCALED - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_NON_UNIFORM_SCALED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_PARALLEL - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_PARALLEL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_PERPENDICULAR - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_PERPENDICULAR - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_POINT_ON_CURVE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_POINT_ON_CURVE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_SLOPE - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_SLOPE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_STRING - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_STRING - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_TANGENT - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_TANGENT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_UNIFORM_SCALED - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_UNIFORM_SCALED - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONS_VERTICAL - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- CONS_VERTICAL - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- CONSERVATIVE - Static variable in class nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters.DensityUpdate
-
Conservative strategy
- CONST_BREAK - Static variable in class nxopen.cam.ChipControl.Types
-
Chip control mode: Constant Break
- CONST_CLEAR - Static variable in class nxopen.cam.ChipControl.Types
-
Chip control mode: Constant Clear
- CONSTANT - Static variable in class nxopen.cam.AreaMillingSteepContainment.CutLevelTypes
-
Constant
- CONSTANT - Static variable in class nxopen.cam.BladeCutLevels.DepthPerCutTypes
-
Constant
- CONSTANT - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.MethodType
-
- CONSTANT - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.RemovalIncrementTypes
-
Removal Increment Type: Constant
- CONSTANT - Static variable in class nxopen.cam.CutLevel.Types
-
Constant
- CONSTANT - Static variable in class nxopen.cam.CutLevelPlanar.Types
-
Constant
- CONSTANT - Static variable in class nxopen.cam.DmCmBuilder.ContactPositionRingHeightType
-
constant
- CONSTANT - Static variable in class nxopen.cam.DmRadBuilder.RadStepoverTypeType
-
Constant
- CONSTANT - Static variable in class nxopen.cam.DmSpiralBuilder.DmSpiralStepoverTypes
-
Constant
- CONSTANT - Static variable in class nxopen.cam.FeedsOptimizationData.FeedRateRangeType
-
Constant
- CONSTANT - Static variable in class nxopen.cam.FlowCutSteepContainment.CutLevelTypes
-
Constant
- CONSTANT - Static variable in class nxopen.cam.PitchSetting.VarianceTypes
-
Constant
- CONSTANT - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Constant
- constant() - Method in interface nxopen.cam.TurnStock
-
Returns the constant stock
License requirements: None.
- CONSTANT - Static variable in class nxopen.die.DrawBeadBuilder.FemaleDepthTypes
-
The female depth is a user specified constant.
- CONSTANT - Static variable in class nxopen.die.DrawBeadBuilder.FemaleWidthTypes
-
The female width is a user specified constant.
- CONSTANT - Static variable in class nxopen.die.DrawBeadSegmentBuilder.MaleBeadWidthTypes
-
The male bead width is specified by a constant value.
- CONSTANT - Static variable in class nxopen.die.FlangeTaskBuilder.SpringbackTypes
-
Constant
- CONSTANT - Static variable in class nxopen.die.SteelInsertSectionBuilder.ExtensionTypeOption
-
constant
- CONSTANT - Static variable in class nxopen.die.SteelInsertSegmentChildBuilder.ExtensionTypeOption
-
constant
- CONSTANT - Static variable in class nxopen.die.SteelInsertSegmentParentBuilder.ExtensionTypeOption
-
constant
- CONSTANT - Static variable in class nxopen.features.AOCSBuilder.OffsetDistanceType
-
constant offset
- CONSTANT - Static variable in class nxopen.features.GlobalShapingBuilder.OffsetMethod
-
Constant offset
- CONSTANT - Static variable in class nxopen.features.GlobalShapingBuilder.RotationMethod
-
Constant anlge rotation
- CONSTANT - Static variable in class nxopen.features.shipdesign.ExcessMaterialBuilder.Offset
-
constant offset
- CONSTANT - Static variable in class nxopen.fields.FieldEvaluator.ValuesOutsideTableInterpolationEnum
-
Returns the boundary value as interpolation result
- CONSTANT - Static variable in class nxopen.geometricutilities.ConicCrossSection.DepthMethod
-
Constant
- CONSTANT - Static variable in class nxopen.geometricutilities.ConicCrossSection.OffsetMethod
-
Constant
- CONSTANT - Static variable in class nxopen.geometricutilities.ConicCrossSection.RhoMethod
-
Constant
- CONSTANT - Static variable in class nxopen.geometricutilities.ConicCrossSection.ShapeSkewMethod
-
Constant
- CONSTANT - Static variable in class nxopen.geometricutilities.LawBuilder.Type
-
constant law type
- CONSTANT - Static variable in class nxopen.geometricutilities.RadiusMethod
-
Constant
- CONSTANT - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.ScalingOptions
-
Constant
- CONSTANT - Static variable in class nxopen.geometricutilities.TransitionLawNodeBuilder.TransitionType
-
Constant transition
- CONSTANT - Static variable in class nxopen.mechatronics.AccelerometerBuilder.OutputMeasureType
-
MEASURE_UNITLESS
- CONSTANT - Static variable in class nxopen.mechatronics.DistanceSensorBuilder.OutputMeasureType
-
MEASURE_UNITLESS
- CONSTANT - Static variable in class nxopen.mechatronics.GenericSensorBuilder.OutputMeasureType
-
MEASURE_UNITLESS
- CONSTANT - Static variable in class nxopen.mechatronics.InclinometerBuilder.OutputMeasureType
-
MEASURE_UNITLESS
- CONSTANT - Static variable in class nxopen.mechatronics.PositionSensorBuilder.OutputMeasureType
-
MEASURE_UNITLESS
- CONSTANT - Static variable in class nxopen.mechatronics.VelocitySensorBuilder.OutputMeasureType
-
MEASURE_UNITLESS
- CONSTANT - Static variable in class nxopen.motion.ConnectorCoefficientTypes
-
constant type
- CONSTANT - Static variable in class nxopen.motion.DriverOperation.Type
-
Constant; Deprecated in NX11.0; use type_polynomial instead
- CONSTANT - Static variable in class nxopen.motion.ForceValueTypes
-
constant type use constant value define force magnitude
- CONSTANT - Static variable in class nxopen.motion.JointFrictionAdams.FrictionOverlapDelta
-
- CONSTANT - Static variable in class nxopen.motion.JointFrictionRecurDyn.FrictionOverlapDelta
-
- CONSTANT - Static variable in class nxopen.motion.MechatronicsBuilder.SolverCommunicationIntervalType
-
- CONSTANT - Static variable in class nxopen.motion.TirePropertyCdBuilder.AmbientTempType
-
- CONSTANT - Static variable in class nxopen.motion.TirePropertyCdBuilder.InflationPressureType
-
- CONSTANT - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.ClearanceOptionItems
-
The design option is normal
- CONSTANT - Static variable in class nxopen.tooling.LayoutBuilder.LayoutSubType
-
Constanct circular type
- CONSTANT - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalClearanceOptionType
-
The design option is normal
- CONSTANT - Static variable in class nxopen.tooling.PunchInsertBuilder.NormalClearanceOptionTypeItems
-
The design option is normal
- CONSTANT - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
-
- CONSTANT_ANGLE - Static variable in class nxopen.Sketch.ConstraintType
-
- CONSTANT_ANGLE - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- CONSTANT_ANGLE - Static variable in class nxopen.uf.UFSket.ConType
-
- CONSTANT_BODY_VOLUME - Static variable in class nxopen.FlatteningBuilder.FlatteningConstantType
-
Deprecated.
force constant volume of the body
- CONSTANT_CURVE_LENGTH - Static variable in class nxopen.FlatteningBuilder.FlatteningConstantType
-
Deprecated.
Force constant length
- CONSTANT_FACE_AREA - Static variable in class nxopen.FlatteningBuilder.FlatteningConstantType
-
Deprecated.
Force constant area
- CONSTANT_INPUT - Static variable in class nxopen.uf.UFMotion.JointMotionInputType
-
- CONSTANT_LENGTH - Static variable in class nxopen.Sketch.ConstraintType
-
- CONSTANT_LENGTH - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- CONSTANT_LENGTH - Static variable in class nxopen.uf.UFSket.ConType
-
- CONSTANT_PARAMETER - Static variable in class nxopen.Edge.EdgeType
-
Constant parameter edge
- CONSTANT_RADIUS - Static variable in class nxopen.motion.SegmentBuilder.TypeChoices
-
Constant Radius
- CONSTANT_RADIUS_CHAMFER - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.CornerType
-
- CONSTANT_TEXT - Static variable in class nxopen.ame.PlcRule.Type
-
- CONSTANT_VALUE - Static variable in class nxopen.ame.PlcRule.Type
-
- CONSTANT_VELOCITY - Static variable in class nxopen.cae.responsesimulation.VelocityImpactExcitationBuilder.ImpactMethodType
-
the users will only be able to specify the velocity for the impact
- CONSTANT_WIDTH - Static variable in class nxopen.blockstyler.Tree.ColumnResizePolicy
-
Constant width
- constantFittingSectionCount() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the constant fitting section count
License requirements: None.
- constantIncrement() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the constant increment
License requirements: None.
- constantIncrement() - Method in interface nxopen.cam.ChipControl
-
Returns the Constant Increment
License requirements: None.
- constantLowerLimit() - Method in interface nxopen.cam.FeedsOptimizationData
-
Returns the constant lower limit
License requirements: None.
- constantRadiusBankAngle() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the bank angle of a constant radius segment
License requirements: mechanisms ("MECHANISMS")
.
- constantRadiusElevationChange() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the elevation change of a constant radius segment
License requirements: mechanisms ("MECHANISMS")
.
- Constants - Class in nxopen.annotations
-
Constants for annotations
- Constants - Class in nxopen.layer
-
Constants for layers
- constantterm - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskConstraintEquationData
-
The constant term is the constant that the constraint equation equals.
- constantThickness() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the option to maintain constant thickness during thickening.
- ConstantType - Class in nxopen.ame
-
The Plc Constant types
- constantUObjects() - Method in interface nxopen.fields.SpatialMapBuilder
-
- constantUpperLimit() - Method in interface nxopen.cam.FeedsOptimizationData
-
Returns the constant upper limit
License requirements: None.
- CONSTANTVELOCITY - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type allows 2 rotational degrees of freedom,
rotation about both z axes of the joint markers,
Rotation about the second marker's z-axis is equal
and opposite to the first marker's rotation.
- constantVObjects() - Method in interface nxopen.fields.SpatialMapBuilder
-
- constName() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the constructed feature name
License requirements: None.
- CONSTRAINED - Static variable in class nxopen.features.StudioXformBuilderEx.PoleEditType
-
Edited maintaining constraint
- CONSTRAINED_LAPLACIAN - Static variable in class nxopen.cae.optimization.TBSMeshSmooth.Strategy
-
Constrained Laplacian Strategy
- constrainedEndPoint1() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the end point1
License requirements: None.
- constrainedEndPoint2() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the end point2
License requirements: None.
- constrainedPlaneCSYS() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the constrained plane.
- constrainedPoint() - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
Returns the constrained point setting.
- constrainedStartPoint1() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the start point1
License requirements: None.
- constrainedStartPoint2() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the start point2
License requirements: None.
- constraint() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the constraint.
- CONSTRAINT - Static variable in class nxopen.cae.LbcAssociationMgr.BcType
-
Associate constraints
- CONSTRAINT - Static variable in class nxopen.cae.SimLbcFolder.Type
-
Constraint type folder
- constraint() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
Returns the continuity type for matching
License requirements: None.
- constraint() - Method in interface nxopen.geometricutilities.PointSetAlignmentBuilder
-
Returns the constraint
License requirements: None.
- Constraint - Interface in nxopen.positioning
-
Constraints for use in positioning objects in NX.
- constraint() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Returns a value that indicates whether adding a constraint when placing a fill component.
- Constraint() - Constructor for class nxopen.uf.UFCurve.Constraint
-
- Constraint(UFCurve.ConstraintType, UFCurve.EndType, Tag, double, UFCurve.HelpData) - Constructor for class nxopen.uf.UFCurve.Constraint
-
- constraint - Variable in class nxopen.uf.UFModlFeatures.AskFaceConstraintData
-
- Constraint.Alignment - Class in nxopen.positioning
-
Specifies alignment of directed geometries used in a constraint.
- Constraint.SolverStatus - Class in nxopen.positioning
-
Specifies the status of a constraint.
- Constraint.SplineType - Class in nxopen.positioning
-
Specifies how the spline points define the shape of the spline.
- Constraint.Type - Class in nxopen.positioning
-
Specifies the type of a constraint.
- CONSTRAINT_IMPLICIT - Static variable in class nxopen.assemblies.PositionOverrideType
-
Position implicitly overridden because of assembly constraints
- CONSTRAINT_MODE - Static variable in class nxopen.cae.BaseIteration.IterationType
-
Constraint Modal Analysis Iteration
- CONSTRAINT_NONE - Static variable in class nxopen.uf.UFCurve.ConstraintType
-
- constraintAlignment() - Method in interface nxopen.positioning.Constraint
-
Returns
the alignment behavior for the constraint.
- constraintChecking() - Method in interface nxopen.cae.optimization.DAOStopCondition
-
Returns the constraint checking flag, only effective for global sensitivity optimization type
License requirements: None.
- ConstraintCollection - Interface in nxopen.positioning
-
a collection of constraints
To obtain an instance of this class, refer to
Positioner
Created in NX5.0.0
- constraintCollectionType() - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder
-
Returns the constraint collection types
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- constraintColor() - Method in interface nxopen.preferences.SubdivisionModelingPreferences
-
Returns the constrained entity color.
- constraintCurve() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the constraint curve.
- constraintCurveFromTargetRegion() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the collection of constraint curve from target region
License requirements: None.
- constraintCurveFromUnformRegion() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the collection of constraint curve from unform region
License requirements: None.
- constraintCurveToEdit() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the constraint curve to edit.
- constraintDelayed - Variable in class nxopen.PartDelayedUpdateStatus.DelayStatusInfo
-
The part is delayed because assembly constraints are delayed.
- ConstraintDisplayBuilder - Interface in nxopen.assemblies
-
- ConstraintDisplayBuilder.VisibleConstraintsRuleOptions - Class in nxopen.assemblies
-
This enum is used to control which constraints are treated as connected to the selected
components.
- constraintFace() - Method in interface nxopen.features.CoplanarBuilder
-
Returns the face change
License requirements: None.
- constraintFaces() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the constraint faces.
- constraintFaces() - Method in interface nxopen.features.BridgeCurveBuilder
-
- constraintFaces() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the constraint faces
License requirements: None.
- constraintFaces() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the constraint faces
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- constraintFaces() - Method in interface nxopen.geometricutilities.Continuity
-
Returns the constraint face collector.
- ConstraintGeometry() - Constructor for class nxopen.Sketch.ConstraintGeometry
-
- ConstraintGeometry(NXObject, Sketch.ConstraintPointType, int) - Constructor for class nxopen.Sketch.ConstraintGeometry
-
Constructor for the ConstraintGeometry object.
- ConstraintGeometryHelp() - Constructor for class nxopen.Sketch.ConstraintGeometryHelp
-
- ConstraintGeometryHelp(Sketch.ConstraintGeometryHelpType, Point3d, double) - Constructor for class nxopen.Sketch.ConstraintGeometryHelp
-
Constructor for the ConstraintGeometryHelp object.
- constraintGroupName() - Method in interface nxopen.positioning.ComponentConstraintGroupBuilder
-
Returns the name of constraint group
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- constraintId - Variable in class nxopen.bodydes.OnestepUnformBuilder.MeshesData
-
- constraintIndex - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- constraintLimitType - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
-
constraint limit type, lower type or upper type
- constraintLowerLimitValue - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
-
Lower limit value
- constraintManager() - Method in interface nxopen.features.CurveOnSurfaceBuilder
-
Returns the constraint manager
License requirements: solid_modeling ("SOLIDS MODELING")
.
- constraintManager() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the constraint manager
License requirements: None.
- constraintManager() - Method in interface nxopen.features.IsoparametricCurvesBuilder
-
Returns the constraint manager.
- constraintManager() - Method in interface nxopen.features.PolylineBuilder
-
Returns the constraint manager
License requirements: None.
- constraintManager() - Method in interface nxopen.features.StudioSplineBuilder
-
- constraintManager() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the constraint manager
License requirements: None.
- constraintManager() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the constraint manager
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- constraintManager() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the constraint manager.
- constraintManager() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
Returns the iso parameter point
License requirements: None.
- constraintName() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
-
Returns the constraint name.
- constraintName - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- constraintOptions() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the option to minimize the disturbance
License requirements: None.
- constraintPlane() - Method in interface nxopen.features.PolylineBuilder
-
Returns the coordinate system defining plane constraint
License requirements: None.
- constraintPlane() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the coordinate system defining plane constraint
License requirements: None.
- constraintPoint() - Method in interface nxopen.routing.StockOffsetPointBuilder
-
Returns the point that defines the location of the selected point.
- constraintRadius() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the constraint radius
License requirements: None.
- ConstraintReference - Interface in nxopen.positioning
-
ConstraintReference for use in positioning objects in NX.
- ConstraintReference.ConstraintOrder - Class in nxopen.positioning
-
Specifies the order of the constraint reference used in a
Constraint
.
- ConstraintReference.GeometryType - Class in nxopen.positioning
-
- ConstraintReference.HalfSpace - Class in nxopen.positioning
-
Specifies the half space value of one geometry used in a distance constraint.
- constraintReferenceHalfSpace() - Method in interface nxopen.positioning.ConstraintReference
-
Returns
the half_space value for the constraint reference.
- ConstraintResolutionBuilder - Interface in nxopen.cae
-
- ConstraintResolutionBuilder.Rule - Class in nxopen.cae
-
Deprecated.
Constraint Resolution Rule
- constraints() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Represents the response constrain collection belonging to this optimization solution .
- constraints() - Method in interface nxopen.cae.SimSimulation
-
Returns the constraint collection belonging to this sim part .
- constraints() - Method in interface nxopen.positioning.Positioner
-
The collection of
Constraint
s defined in the positioner
Created in NX3.0.0
- constraints - Variable in class nxopen.Sketch.FilletData
-
The constraints that were created by the fillet.
- constraints - Variable in class nxopen.uf.UFCurve.LineArc
-
- constraintSetManager() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Returns the constraint set manager
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- constraintSets() - Method in interface nxopen.cae.SimSimulation
-
Returns the CAE SimConstraintSet collection belonging to this sim part .
- constraintSlopeType() - Method in interface nxopen.SketchG1Constraint
-
Returns the slope type of the constraint.
- constraintsToMotionObject(NXObject, NXObject) - Method in interface nxopen.motion.MotionSession
-
Converts mating conditions and constraints to links and joints
License requirements: mechanisms ("MECHANISMS")
.
- constraintSymbolSize() - Method in interface nxopen.preferences.SessionSketch
-
Returns the constraint symbol size.
- constraintSymbolSize() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the constraint symbol size
License requirements: None.
- constraintType() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the constraint type for intermediate unform or complete unform.
- constraintType() - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
-
Returns the constraint type
License requirements: None.
- constraintType() - Method in interface nxopen.DatumConstraint
-
Returns
License requirements: solid_modeling ("SOLIDS MODELING")
.
- constraintType() - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilder
-
Returns the constraint type
License requirements: None.
- constraintType() - Method in interface nxopen.mfg.am.Nester3D
-
Returns the constraints
License requirements: None.
- constraintType - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
-
Constraint type
- constraintType() - Method in interface nxopen.positioning.Constraint
-
Returns
the constraint type.
- constraintType() - Method in interface nxopen.SketchConstraint
-
Returns the constraint's type
License requirements: None.
- constraintType() - Method in interface nxopen.SketchConstraintBuilder
-
Returns the constraint type
License requirements: None.
- constraintType - Variable in class nxopen.uf.UFCurve.Constraint
-
- constraintUMax() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit face Umax constraint
License requirements: None.
- constraintUMin() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit face Umin constraint
License requirements: None.
- constraintUpperLimitValue - Variable in class nxopen.optimization.OptimizationBuilder.OptimizationConstraint
-
Upper limit value
- constraintValue() - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
-
Returns the constrain value
License requirements: None.
- constraintVMax() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit face Vmax constraint
License requirements: None.
- constraintVMin() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit face Vmin constraint
License requirements: None.
- construct(StylerEvent) - Method in interface nxopen.uistyler.DialogItem.Construct
-
Called when the dialog displays.
- CONSTRUCT_REASON - Static variable in class nxopen.uistyler.StylerEvent.Reason
-
Construct reason
- CONSTRUCTED - Static variable in class nxopen.PlaneTypes.MethodType
-
Constructed types: super type for At Angle Parallel/Perpendicular or Tangent Angle to Plane Parallel/Perpendicular
- constructGeometryColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the color that will be used for the various construction curves
License requirements: None.
- constructGeometryFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the font that will be used for the various construction curves
License requirements: None.
- constructGeometryLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the layer that will be used for the various construction curves
License requirements: None.
- constructGeometryWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the line width that will be used for the various construction curves
License requirements: None.
- constructGuidecurves(boolean, boolean) - Method in interface nxopen.features.AeroFlangeBuilder
-
Construct guide curves
License requirements: None.
- constructGuidecurves(boolean, boolean) - Method in interface nxopen.features.AeroRibBuilder
-
Construct guide curves
License requirements: None.
- construction() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the construction options.
- construction() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the construction options.
- constructionCurve - Variable in class nxopen.uf.UFDraw.BreakRegionBoundary
-
- constructionFace1() - Method in interface nxopen.features.LabelChamferBuilder
-
Returns the construction face1 of chamfer face
License requirements: None.
- constructionFace2() - Method in interface nxopen.features.LabelChamferBuilder
-
Returns the construction face2 of chamfer face
License requirements: None.
- ConstructionFeatureData - Interface in nxopen.features
-
Represents the data of a construction feature.
- constructionMethod() - Method in interface nxopen.weld.FilletBuilder
-
Returns the value for determining the construction method.
- constructionMethod() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the construction method for creating Jointmark
License requirements: ugweld ("UG WELD")
.
- constructionMethodOption() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the value specifying which construction method to use for creating the rolling line.
- constructor(int) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Constructs solver to prepare the data.
- constructParametersData() - Method in interface nxopen.tooling.AddReusablePart
-
Constructs the parameters data, reads data from part family or spreadsheet and updates the parameter data in the part
License requirements: None.
- constructSubmodelForResultAccessReferenceField(FieldReference, FieldManager, Result, int[], boolean) - Method in interface nxopen.cae.ResultManager
-
Creates a result access reference field object that is evaluated at node, element, or element-node id's.
- constructSurfaceBoundaryCurve(boolean) - Method in interface nxopen.features.BridgeSurfaceBuilder
-
Constructs bridge surface boundary curve
License requirements: solid_modeling ("SOLIDS MODELING")
.
- constStatus - Variable in class nxopen.uf.UFDraw.BreakoutData
-
- constStatus - Variable in class nxopen.uf.UFDraw.ViewBoundary
-
- constThickness - Variable in class nxopen.uf.UFSf.MidsrfUserParms
-
- constUObjects() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the list of
PathObjects
objects that define sections of constant u
License requirements: None.
- constVObjects() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the list of
PathObjects
objects that define sections of constant v
License requirements: None.
- consTypes - Variable in class nxopen.features.MeshSurfaceBuilder.FaceConstraintCollectorsData
-
type on each side.
- CONT1IN2 - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType
-
- CONT2IN1 - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType
-
- CONT_ORDER_ILLEGAL - Static variable in class nxopen.uf.UFConstants
-
- CONTACT - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Contact element
- CONTACT - Static variable in class nxopen.cae.NodalForceReport.ForceComponent
-
- CONTACT - Static variable in class nxopen.cae.NodalForceReportBuilder.Force
-
- CONTACT - Static variable in class nxopen.cam.BoundarySet.ToolPositionTypes
-
tool tip positioned contacting boundary
- CONTACT - Static variable in class nxopen.cam.DmToolPosition.ToolPositionOption
-
Contact position
- CONTACT - Static variable in class nxopen.cam.DPMItpBuilder.ToolPositionOption
-
Contact position
- CONTACT - Static variable in class nxopen.cam.ProbeControlParametersBuilder.AdjustmentTypes
-
Contact Point
- CONTACT - Static variable in class nxopen.cam.ProbeOutputControl.OutputType
-
Contact Point
- CONTACT_CURVE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionCurveOptions
-
use contact curve
- CONTACT_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_EDGE - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
-
edge contact
- CONTACT_FACE - Static variable in class nxopen.cae.MeshCollectorBuilder.ElementDimensionOption
-
face contact
- CONTACT_FINAL_SEPARATION - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_GAP_DISTANCE - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_INITIAL_SEPARATION - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_PENETRATION - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_SLIP_INCREMENTAL_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_SLIPTOTAL_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_STATUS - Static variable in class nxopen.cae.Result.Quantity
-
- CONTACT_TRACTION - Static variable in class nxopen.cae.Result.Quantity
-
- contactArcAxis - Variable in class nxopen.cam.CamOperationMotionContactDataType
-
- contactArcAxis - Variable in class nxopen.uf.UFPath.ContactData
-
- contactArcCenter - Variable in class nxopen.cam.CamOperationMotionContactDataType
-
Contact arc center
- contactArcCenter - Variable in class nxopen.uf.UFPath.ContactData
-
- contactArcRadius - Variable in class nxopen.cam.CamOperationMotionContactDataType
-
Contact arc radius
- contactArcRadius - Variable in class nxopen.uf.UFPath.ContactData
-
- contactAreaFunction() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the contact area function.
- contactAreaProfile() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the Contact Area Profile.
- contactAreaType() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the contact area type.
- contactAxis - Variable in class nxopen.uf.UFPath.ContactData
-
- CONTACTBETWEEN_ELEMENTS - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.Contact
-
- CONTACTBETWEEN_OBJECTS - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.Contact
-
- contactBnd() - Method in interface nxopen.cam.FlowBuilder
-
Returns the Cleanup Output, Contact Boundary
License requirements: None.
- contactData() - Method in interface nxopen.cam.PathLinearMotion
-
Returns the contact motion if the motion is contact and Nothing if not
License requirements: None.
- ContactData() - Constructor for class nxopen.uf.UFPath.ContactData
-
- ContactData(double[], double[], double[], double[], double, UFPath.Shape) - Constructor for class nxopen.uf.UFPath.ContactData
-
- contactEdge() - Method in interface nxopen.cae.ContactMeshBuilder
-
Returns the contact edge or the source edge
License requirements: None.
- contactEdge - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- contactEdgeEndLimit - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- contactEdgeEndPoint() - Method in interface nxopen.cae.ContactMeshBuilder
-
Returns the end point of contact on contact edge
License requirements: None.
- contactEdgeMeshDir - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- contactEdgeStartLimit - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- contactEdgeStartPoint() - Method in interface nxopen.cae.ContactMeshBuilder
-
Returns the start point of contact on contact edge
License requirements: None.
- contactKinematics() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the Contact Kinematics (Effective Rolling Radius, Slip Velocities, Surface Normal).
- contactLengthWidth() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the contact length/width.
- ContactMeshBuilder - Interface in nxopen.cae
-
- ContactMeshBuilder.AlignmentType - Class in nxopen.cae
-
the type of alignment to be created
- ContactMeshData() - Constructor for class nxopen.uf.UFSf.ContactMeshData
-
- ContactMeshData(String, Tag, int, int, int, int, double, Tag, UFSf.MeshGeomMeshdir, double, double, Tag, UFSf.MeshGeomMeshdir, double, double) - Constructor for class nxopen.uf.UFSf.ContactMeshData
-
- contactMethod() - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
Returns the contact method.
- contactMethod - Variable in class nxopen.uf.UFMotion.Ask3dContactMethodData
-
- contactName() - Method in interface nxopen.motion.CurveContactBuilder
-
Returns the contact name
License requirements: None.
- contactOffset() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the contact offset.
- ContactParameters() - Constructor for class nxopen.uf.UFMotion.ContactParameters
-
- ContactParameters(double, double, double, double, double, double, double) - Constructor for class nxopen.uf.UFMotion.ContactParameters
-
- contactPoint() - Method in interface nxopen.mechatronics.RackPinionBuilder
-
Returns a value that indicates the contact point value.
- contactPoint() - Method in interface nxopen.motion.CouplerBuilder
-
Returns the contact point
License requirements: None.
- contactPointGlobal() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the contact point surface friction global.
- contactPointRoadRef() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the contact point surface friction road frame.
- contactPointsTolerance() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the tolerance to find contact points.
- contactPositionBottomDistance() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the Contact Position Bottom Distance
License requirements: None.
- contactPositionDistance() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the Contact Position Distance
License requirements: None.
- contactPositionRingHeight() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the contact position ring height type
License requirements: None.
- contactPositionTopDistance() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the Contact Position Top Distance
License requirements: None.
- contactProperty() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the contact property
License requirements: mechanisms ("MECHANISMS")
.
- contactPt - Variable in class nxopen.cam.CamOperationMotionContactDataType
-
If motion is contact, this is the contact position.
- contactPt - Variable in class nxopen.uf.UFPath.ContactData
-
- contactShape - Variable in class nxopen.cam.CamOperationMotionContactDataType
-
- contactShape - Variable in class nxopen.uf.UFPath.ContactData
-
- contactSide1 - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- contactSide2 - Variable in class nxopen.uf.UFMotion.Motion3DContact
-
- contactType() - Method in interface nxopen.cae.CfdContactPreventionConstraintBuilder
-
Returns the contact type
License requirements: None.
- contactType() - Method in interface nxopen.cam.Path
-
Returns the contact type of the path
License requirements: None.
- contactType() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the type
License requirements: mechanisms ("MECHANISMS")
.
- contactType() - Method in interface nxopen.motion.BodyContactBuilder
-
Returns the type: 3D contact or Sphere to CAD
License requirements: mechanisms ("MECHANISMS")
.
- contactTypeOption() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the contact type option
License requirements: None.
- contactTypeOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the contact type.
- conTags - Variable in class nxopen.uf.UFSket.AskConstraintsOfGeometryData
-
- conTags - Variable in class nxopen.uf.UFSket.AskConstraintsOfSketchData
-
- conTags - Variable in class nxopen.uf.UFSket.AskGeoConsOfGeometryData
-
- conTags - Variable in class nxopen.uf.UFSket.AskGeoConsOfSketchData
-
- conTags - Variable in class nxopen.uf.UFSket.AskInferredConsOfSketchData
-
- conTags - Variable in class nxopen.uf.UFSket.MirrorObjectsData
-
- CONTAINER - Static variable in class nxopen.shipdesign.ShipNavigatorNodeBuilder.NodeTypes
-
The container node type.
- containerFeature() - Method in interface nxopen.features.Feature
-
Returns the container feature for this feature.
- containerFile() - Method in interface nxopen.tooling.ReusableObject
-
Returns the file which contains the reusable objects, could be part file or XML file
License requirements: None.
- ContainerMoveBuilder - Interface in nxopen.cam
-
- containerName() - Method in interface nxopen.features.shipdesign.ShipContainerBuilder
-
Returns
the name used in generating Item IDs for newly created Ship objects
License requirements: None.
- containerPart() - Method in interface nxopen.features.shipdesign.ShipContainerBuilder
-
Returns
the part to which are added newly created Ship objects
License requirements: None.
- containment() - Method in interface nxopen.cae.BoundingVolumePrimitive
-
Returns the contaiment for the Bounding Volume Primitive.
- containmentType() - Method in interface nxopen.cam.EditSubopCommand
-
Returns the containment type
License requirements: None.
- CONTAINS - Static variable in class nxopen.ame.BaseEvaluatorBuilder.ConditionType
-
- contains(AMEBaseNode) - Method in interface nxopen.ame.SelectAMEBaseNodeList
-
Returns whether the specified object is already in the list or not.
- CONTAINS - Static variable in class nxopen.annotations.SearchModelViewBuilder.TextComparisionOptions
-
Contains
- contains(Annotation) - Method in interface nxopen.annotations.SelectAnnotationList
-
Returns whether the specified object is already in the list or not.
- contains(BaseCustomSymbol) - Method in interface nxopen.annotations.SelectBaseCustomSymbolList
-
Returns whether the specified object is already in the list or not.
- contains(OrdinateDimension) - Method in interface nxopen.annotations.SelectOrdinateDimensionList
-
Returns whether the specified object is already in the list or not.
- contains(TableSection) - Method in interface nxopen.annotations.SelectTableSectionList
-
Returns whether the specified object is already in the list or not.
- contains(Component) - Method in interface nxopen.assemblies.SelectComponentList
-
Returns whether the specified object is already in the list or not.
- contains(CAEBody) - Method in interface nxopen.cae.SelectCAEBodyList
-
Returns whether the specified object is already in the list or not.
- contains(CAEEdge) - Method in interface nxopen.cae.SelectCAEEdgeList
-
Returns whether the specified object is already in the list or not.
- contains(CAEFace) - Method in interface nxopen.cae.SelectCAEFaceList
-
Returns whether the specified object is already in the list or not.
- contains(FEElemFace) - Method in interface nxopen.cae.SelectFEElemFaceList
-
Returns whether the specified object is already in the list or not.
- contains(FENode) - Method in interface nxopen.cae.SelectFENodeList
-
Returns whether the specified object is already in the list or not.
- contains(Mesh) - Method in interface nxopen.cae.SelectMeshList
-
Returns whether the specified object is already in the list or not.
- contains(CAMFeature) - Method in interface nxopen.cam.SelectCAMFeatureList
-
Returns whether the specified object is already in the list or not.
- contains(DraftingView) - Method in interface nxopen.drawings.SelectDraftingViewList
-
Returns whether the specified object is already in the list or not.
- contains(DrawingView) - Method in interface nxopen.drawings.SelectDrawingViewList
-
Returns whether the specified object is already in the list or not.
- contains(FacetedBody) - Method in interface nxopen.facet.SelectFacetedBodyList
-
Returns whether the specified object is already in the list or not.
- contains(BodyFeature) - Method in interface nxopen.features.SelectBodyFeatureList
-
Returns whether the specified object is already in the list or not.
- contains(DatumCsys) - Method in interface nxopen.features.SelectDatumCsysList
-
Returns whether the specified object is already in the list or not.
- contains(Feature) - Method in interface nxopen.features.SelectFeatureList
-
Returns whether the specified object is already in the list or not.
- contains(SubdivisionBody) - Method in interface nxopen.features.subdivision.SelectSubdivisionBodyList
-
Returns whether the specified object is already in the list or not.
- contains(Component) - Method in interface nxopen.layout2d.SelectComponentList
-
Returns whether the specified object is already in the list or not.
- contains(CollisionSensor) - Method in interface nxopen.mechatronics.SelectCollisionSensorList
-
Returns whether the specified object is already in the list or not.
- contains(HydraulicCylinder) - Method in interface nxopen.mechatronics.SelectHydraulicCylinderList
-
Returns whether the specified object is already in the list or not.
- contains(LogicObject) - Method in interface nxopen.mechatronics.SelectLogicObjectList
-
Returns whether the specified object is already in the list or not.
- contains(PneumaticCylinder) - Method in interface nxopen.mechatronics.SelectPneumaticCylinderList
-
Returns whether the specified object is already in the list or not.
- contains(Body) - Method in interface nxopen.SelectBodyList
-
Returns whether the specified object is already in the list or not.
- contains(CoordinateSystem) - Method in interface nxopen.SelectCoordinateSystemList
-
Returns whether the specified object is already in the list or not.
- contains(Curve) - Method in interface nxopen.SelectCurveList
-
Returns whether the specified object is already in the list or not.
- contains(DatumPlane) - Method in interface nxopen.SelectDatumPlaneList
-
Returns whether the specified object is already in the list or not.
- contains(DisplayableObject) - Method in interface nxopen.SelectDisplayableObjectList
-
Returns whether the specified object is already in the list or not.
- contains(Edge) - Method in interface nxopen.SelectEdgeList
-
Returns whether the specified object is already in the list or not.
- contains(Expression) - Method in interface nxopen.SelectExpressionList
-
Returns whether the specified object is already in the list or not.
- contains(Face) - Method in interface nxopen.SelectFaceList
-
Returns whether the specified object is already in the list or not.
- contains(IBaseCurve) - Method in interface nxopen.SelectIBaseCurveList
-
Returns whether the specified object is already in the list or not.
- contains(IBasePlane) - Method in interface nxopen.SelectIBasePlaneList
-
Returns whether the specified object is already in the list or not.
- contains(ICurve) - Method in interface nxopen.SelectICurveList
-
Returns whether the specified object is already in the list or not.
- contains(INXObject) - Method in interface nxopen.SelectINXObjectList
-
Returns whether the specified object is already in the list or not.
- contains(IParameterizedSurface) - Method in interface nxopen.SelectIParameterizedSurfaceList
-
Returns whether the specified object is already in the list or not.
- contains(ModelingView) - Method in interface nxopen.SelectModelingViewList
-
Returns whether the specified object is already in the list or not.
- contains(NXObject) - Method in interface nxopen.SelectNXObjectList
-
Returns whether the specified object is already in the list or not.
- contains(TaggedObject) - Method in interface nxopen.SelectObjectList
-
Returns whether the specified object is already in the list or not.
- contains(Part) - Method in interface nxopen.SelectPartList
-
Returns whether the specified object is already in the list or not.
- contains(Point) - Method in interface nxopen.SelectPointList
-
Returns whether the specified object is already in the list or not.
- contains(Spline) - Method in interface nxopen.SelectSplineList
-
Returns whether the specified object is already in the list or not.
- contains(TaggedObject) - Method in interface nxopen.SelectTaggedObjectList
-
Returns whether the specified object is already in the list or not.
- contains(View) - Method in interface nxopen.SelectViewList
-
Returns whether the specified object is already in the list or not.
- CONTAINS_OPERATOR - Static variable in class nxopen.visualreporting.Condition.OperatorOption
-
- containsBreps - Variable in class nxopen.uf.UFPart.AskJtInfoOfPartData
-
- containsDBNode(Part) - Method in interface nxopen.linedesigner.DBNodeUtils
-
An API to check if part has db node
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- content() - Method in interface nxopen.drafting.PrimaryContentItemBuilder
-
Returns the content.
- content() - Method in interface nxopen.markup.Text
-
Returns the text content
License requirements: None.
- contentAlignment() - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
Returns the content alignment of the cell settings.
- ContentAlignment - Class in nxopen.diagramming.tables
-
Represents the cell content alignment.
- contentDefinition() - Method in interface nxopen.assemblies.SubsetBuilder
-
- ContentDefinition - Interface in nxopen
-
Represents a class that defines the contents that will be pulled in to a subset.
- contentDefinition() - Method in interface nxopen.pdm.ConfigurationContextBuilder
-
- ContentDefinition.Type - Class in nxopen
-
Represents a definition type for the subset creation
- contents() - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Returns the select object
License requirements: None.
- contents() - Method in interface nxopen.layout2d.DefineComponentBuilder
-
Returns the select objects to create a 2D Component definition
License requirements: None.
- contents() - Method in interface nxopen.layout2d.ExportComponentHierarchyBuilder
-
Returns the flag indicating whether to export contents for components
License requirements: None.
- context() - Method in interface nxopen.ame.ExtractAttributeBaseBuilder
-
Returns the object context
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- context() - Method in interface nxopen.issue.SnapshotSubsetBuilder
-
Returns the context indicating the issue snapshot subset type.
- context() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the owner part of operation
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- context() - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
Returns the context part of the proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- context() - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder
-
Returns the context part of the proxy override object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- context() - Method in interface nxopen.menubar.ContextMenuProperties
-
Returns a description for the context for which the menu was created
License requirements: None.
- context() - Method in interface nxopen.positioning.MatingConverter
-
Returns
the current conversion context in which mating conditions will be converted.
- CONTEXT - Static variable in class nxopen.preferences.SessionAssemblies.PositioningTaskCollectionOptionForDesignElements
-
- CONTEXT_ATTRIBUTE_MAP - Static variable in class nxopen.features.shipdesign.ShipnameFieldBuilderType
-
Field whose value comes from context attribute
- CONTEXT_OBJECT - Static variable in class nxopen.ame.ReferenceObjectBuilder.SourceSelectionType
-
- contextAttribute() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the context attribute.
- contextAttribute() - Method in interface nxopen.features.shipdesign.ShipNamesBuilder
-
Returns
the Context Attribute value.
- contextCollection() - Method in interface nxopen.assemblies.PositioningTaskBuilder
-
Returns the context collection
License requirements: None.
- contextComponent() - Method in interface nxopen.features.AssemblyCutBuilder
-
Returns the context component for the assembly cut operation
License requirements: None.
- contextids - Variable in class nxopen.pdm.VariantConfigurationBuilder.VariantRuleTableInformationData
-
array of contextIds comprising of multifield key and itemRev_id from which variant rules are selected
- ContextMenu - Interface in nxopen.menubar
-
Represents a Context Menu .
- ContextMenuEntry - Interface in nxopen.menubar
-
Represents an entry on a context menu.
- ContextMenuEntry.Type - Class in nxopen.menubar
-
Specifies the type of the menu entry.
- ContextMenuProperties - Interface in nxopen.menubar
-
Provides information about the MenuBar.ContextMenu object being customized.
- contextObject() - Method in interface nxopen.ame.ReferenceObjectBuilder
-
Returns the selection for the object where the evaluator will be stored.
- contextRunning - Variable in class nxopen.uf.UFDisp.Inquire
-
- contexts - Variable in class nxopen.uf.UFUgmgr.ListContextsData
-
- contiguityFlag - Variable in class nxopen.uf.UFBound.MemberData
-
- ContinuationDataBuilder - Interface in nxopen.diagramming.tables
-
Represents a ContinuationDataBuilder.
- continuationDataBuilder() - Method in interface nxopen.diagramming.tables.TableBuilder
-
Returns the continuation data.
- ContinuationLocation - Class in nxopen.diagramming.tables
-
Represents the table continuation location.
- continuationNote() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the continuation note flag setting
License requirements: None.
- continuationNote - Variable in class nxopen.uf.UFTabnot.SectionPrefs
-
- continuationProperty() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the continuation property type
License requirements: None.
- continuationSpacing() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the continuation spacing value between sections
License requirements: None.
- CONTINUE - Static variable in class nxopen.menubar.MenuBarManager.CallbackStatus
-
Continue performing the menu item's actions.
- CONTINUE_DIALOG - Static variable in class nxopen.uistyler.DialogState
-
Continue the dialog
- continueIfExamineGeomFails - Variable in class nxopen.uf.UFModl.CompareOptions
-
- continueProcessing() - Method in interface nxopen.drafting.DrawingAutomationWizard
-
Returns the flag denoting whether or not to create the booklet in the current session
License requirements: None.
- CONTINUEWITHOUTPROPAGATINGTHEPARTICULARONE - Static variable in class nxopen.linedesigner.TypedConnectorFeatureBuilder.BehaviorOnMismatch
-
- continueZoneIndexingAcrossSheets() - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
Returns the flag indicates whether the index for horizontal numeric zone labels will continue onto the next sheet or not.
- continueZoneIndexingAcrossSheets() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the continue zone indexing across sheets
License requirements: None.
- continuity() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
- continuity() - Method in interface nxopen.features.BlendCornerBuilder
-
Returns the continuity type
License requirements: None.
- continuity - Variable in class nxopen.features.FillHoleBuilder.BorderContinuity
-
- continuity() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the continuity
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- CONTINUITY - Static variable in class nxopen.features.SectionSurfaceBuilder.SectionMethodFilletBridgeEnum
-
Deprecated.
continuity options
- CONTINUITY - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodFilletBridgeType
-
continuity options
- continuity() - Method in interface nxopen.features.subdivision.SubdivisionBridgeFaceBuilder
-
Returns the continuity.
- continuity() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the continuity.
- continuity() - Method in interface nxopen.features.subdivision.SubdivisionFillBuilder
-
Returns the continuity.
- continuity() - Method in interface nxopen.features.subdivision.SubdivisionLoftBuilder
-
Returns the continuity.
- continuity() - Method in interface nxopen.features.subdivision.SubdivisionRevolveBuilder
-
Returns the continuity.
- continuity() - Method in interface nxopen.features.subdivision.SubdivisionSweepBuilder
-
Returns the continuity.
- continuity() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Returns the continuity level
License requirements: None.
- Continuity - Interface in nxopen.geometricutilities
-
Represents a
Continuity
Allows user to specify continuity constraint surface construction.
- Continuity.ContinuityTypes - Class in nxopen.geometricutilities
-
Continuity type.
- continuityType() - Method in interface nxopen.features.subdivision.SubdivisionConnectCageBuilder
-
Returns the continuity.
- continuityType() - Method in interface nxopen.features.subdivision.SubdivisionSetContinuityBuilder
-
Returns the continuity.
- continuityType() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the curve continuity type
License requirements: None.
- continuityType() - Method in interface nxopen.geometricutilities.Continuity
-
Returns the continuity type.
- continuityTypeOption() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the continuity type option
License requirements: None.
- continuityUMax() - Method in interface nxopen.features.StudioXformBuilder
-
- continuityUMax() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the continuity at U maximum
License requirements: None.
- continuityUMin() - Method in interface nxopen.features.StudioXformBuilder
-
- continuityUMin() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the continuity at U minimum
License requirements: None.
- continuityVMax() - Method in interface nxopen.features.StudioXformBuilder
-
- continuityVMax() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the continuity at V maximum
License requirements: None.
- continuityVMin() - Method in interface nxopen.features.StudioXformBuilder
-
- continuityVMin() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the continuity at V minimum
License requirements: None.
- CONTINUOUS - Static variable in class nxopen.preferences.RoutingPath.ChainMethod
-
Tangents must match at each connection
- CONTINUOUS - Static variable in class nxopen.preferences.SessionModeling.DynamicUpdateType
-
Indicates that Dynamic Update type is continuous
- CONTINUOUS - Static variable in class nxopen.weld.WeldArcMethod
-
creates a single solid
- CONTINUOUS_CUTS - Static variable in class nxopen.cam.CutParametersCutConnectionTypes
-
Cut connection: Continuous Cuts
- continuousAutoDimensioning() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not to continuously create auto dimensions in a sketch.
- continuousAutoDimensioningSetting() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the setting that controls whether or not to continuously create auto dimensions in a sketch.
- continuousCut() - Method in interface nxopen.cam.CylindricalMillingCutParameters
-
Returns the continuous cut
License requirements: None.
- continuousPulse - Variable in class nxopen.cae.Post.AnimationStreamline
-
- CONTOUR - Static variable in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes
-
Zig with Contour
- CONTOUR - Static variable in class nxopen.cam.TurnRoughFinishTestCut.CutTypes
-
Test Cut Type: Contour
- CONTOUR_FLANGE - Static variable in class nxopen.tooling.UniversalUnformBuilder.BendTypes
-
contour flange type
- CONTOUR_LINES - Static variable in class nxopen.geometricanalysis.DistanceAnalysisBuilder.DisplayModes
-
Display in contour lines.
- CONTOUR_LINES - Static variable in class nxopen.geometricanalysis.RadiusAnalysisBuilder.DisplayModes
-
Display in contour lines.
- CONTOUR_LINES - Static variable in class nxopen.geometricanalysis.SlopeAnalysisBuilder.DisplayModes
-
- CONTOUR_POSITION - Static variable in class nxopen.cam.TeachmodeProfileMoveBuilder.StartStopPositionMethods
-
Use end point of last contouring
- CONTOUR_PROFILE - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Contour Profile
- CONTOUR_Z - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Contour Zig
- CONTOUR_ZZ - Static variable in class nxopen.cam.CutStrategy.Types
-
Cut strategy: Ramping Zig-Zag
- ContourAngle - Interface in nxopen.cam
-
- contourCurves - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- contourDepth() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the contour depth
License requirements: None.
- contourDiameterAngle() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the contour diameter angle
License requirements: None.
- contourFaceAngle() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the contour face angle
License requirements: None.
- ContourFlange - Interface in nxopen.features
-
Represents a Contour Flange feature
To create or edit an instance of this class, use
ContourFlangeBuilder
Created in NX5.0.0
- ContourFlangeBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Contour Flange feature builder.
- ContourFlangeBuilder.SectionSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the side of the section in which material is created.
- ContourFlangeBuilder.SweepSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the side in which the contour flange will be swept.
- ContourFlangeBuilder.SweepTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the sweep type of the contour flange
- contourHeight() - Method in interface nxopen.weld.FilletBuilder
-
Returns the linear dimension contour height.
- contourHeight() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the contour height needed for cap
License requirements: None.
- contourHeight() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the contour height
License requirements: ugweld ("UG WELD")
.
- contouringLevel() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns the contouring level.
- contouringRange() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns the option to show contour range either on the border or the faces of the grid.
- ContouringRange - Class in nxopen.cae.xyplot
-
Represents the contouring range
- contourLevelAngle() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the contour level angle
License requirements: None.
- contourLines - Variable in class nxopen.uf.UFModl.GflangeOptionsData
-
- contourLines - Variable in class nxopen.uf.UFSmd.AskContourLinesData
-
- contourRefinement() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the contour refinement level, in the range 0-6.
- CONTOURS - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DisplayTypes
-
Contours
- contourShape() - Method in interface nxopen.weld.GrooveBuilder
-
- contourShift() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the starting contour shift or bias value, as % of the standard contour interval.
- contourSteepAngle() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the contour steep angle
License requirements: None.
- contourSymbol() - Method in interface nxopen.annotations.LineWeldDataBuilder
-
Returns the supplementary contour weld symbols that identify the shape of the weld surface or execution of a weld for both top and bottom of the reference line
License requirements: None.
- contourType - Variable in class nxopen.uf.UFDrf.WeldSymInfo
-
- contourType() - Method in interface nxopen.weld.FilletBuilder
-
Returns the contour.
- contourType() - Method in interface nxopen.weld.PlugSlotBuilder
-
Returns the contour type
License requirements: None.
- contourType() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the contour type
License requirements: ugweld ("UG WELD")
.
- CONTRA_ALIGN - Static variable in class nxopen.positioning.Constraint.Alignment
-
Directions are opposite
- contributorNumber() - Method in interface nxopen.cae.responsesimulation.FrequencyDefinition
-
Returns the number of contributors.
- CONTROL - Static variable in class nxopen.annotations.AssociativityPointOption
-
Control point
- CONTROL - Static variable in class nxopen.motion.DriverOperation.Type
-
Control
- CONTROL - Static variable in class nxopen.motion.MotionSolutionBuilder.AnalysisTypes
-
- CONTROL - Static variable in class nxopen.tooling.BurringInsertBuilder.ParentTypes
-
use PDW project's control part as parent part
- CONTROL - Static variable in class nxopen.tooling.DieBaseBuilder.ParentNodeOpt
-
use PDW project's control part as parent part
- CONTROL - Static variable in class nxopen.tooling.FormingInsertBuilder.ParentTypes
-
use PDW project's control part as parent part
- CONTROL_POINT_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- controlCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the curve control
License requirements: None.
- controlDataFile() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the constrol data to import to kinematic model
License requirements: None.
- controlDirection() - Method in interface nxopen.cam.ToolAxisInterpolate
-
Returns the control direction type
License requirements: None.
- controlInput() - Method in interface nxopen.mechatronics.HydraulicValveBuilder
-
Returns the initial control input.
- controlInput() - Method in interface nxopen.mechatronics.PneumaticValveBuilder
-
Returns the initial control input.
- ControlInput - Interface in nxopen.motion
-
Represents a Control Input motion object.
- ControlInputBuilder - Interface in nxopen.motion
-
- ControlInputBuilder.InputType - Class in nxopen.motion
-
Control Input type
- ControlInputCollection - Interface in nxopen.motion
-
Represents a collection of Control Input objects
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- ControlInputPortBuilder - Interface in nxopen.motion
-
Represents a
ControlPort
builder specific to control input element.
- ControlInputPortBuilder.MeasuredComponent - Class in nxopen.motion
-
the types of components that can be measured by the control input element for the selected variable.
- ControlInputPortBuilder.MeasuredVariable - Class in nxopen.motion
-
the types of variables that can be measured by the control input element.
- ControlInputPortBuilderList - Interface in nxopen.motion
-
Represents a list of objects.
- controlInputs() - Method in interface nxopen.motion.MotionManager
-
- CONTROLLED - Static variable in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
-
- CONTROLLED - Static variable in class nxopen.annotations.TextType
-
Specifies the text defined in the master symbol as enumerated
set of values, one of which can be selected in the custom symbol.
- controlled - Variable in class nxopen.assemblies.ComponentAssembly.SuppressedStateData
-
Is the suppression state controlled at the level of arrangement?
- controlledNoteTitle() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the controlled note title
License requirements: None.
- CONTROLLER - Static variable in class nxopen.cae.optimization.TBSOptimizationSolutionBuilder.StrategyType
-
uses controller strategy to run optimization
- controllerLine() - Method in interface nxopen.sim.MachineToolConfiguration
-
Returns the controller line
License requirements: None.
- controllerName() - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
Returns the controller's name that is used for the postprocessor.
- controllerType() - Method in interface nxopen.sim.MachineToolConfiguration
-
Returns the controller type
License requirements: None.
- controlMethod() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the control method.
- ControlOutput - Interface in nxopen.motion
-
Represents a Control Output motion object.
- ControlOutputBuilder - Interface in nxopen.motion
-
- ControlOutputBuilder.ControlOutputType - Class in nxopen.motion
-
Control Output type
- ControlOutputBuilder.DirectionType - Class in nxopen.motion
-
Output Variable Direction
- ControlOutputBuilder.VariableType - Class in nxopen.motion
-
Output Variable type
- ControlOutputCollection - Interface in nxopen.motion
-
Represents a collection of Control Output objects
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- controlOutputs() - Method in interface nxopen.motion.MotionManager
-
- controlParameters() - Method in interface nxopen.cae.optimization.TBSOptimizationSolution
-
Returns the parameters to control optimization
License requirements: None.
- controlPoint() - Method in interface nxopen.features.FlowBlendBuilder
-
Returns the control point object
License requirements: None.
- ControlPoint - Interface in nxopen.routing
-
Routing Control Points define a position in space, and are used to determine connections
from segments to segments, and segments to ports.
- controlpoint - Variable in class nxopen.routing.ControlPointCollection.CreateControlPointData
-
- controlPoint() - Method in interface nxopen.SketchConicBuilder
-
Returns the control point
License requirements: None.
- controlPoint() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the control point for the copy operation.
- controlPoint() - Method in interface nxopen.tooling.InsertEditToolsBuilder
-
Returns the control point
License requirements: None.
- ControlPoint.DefinedStatus - Class in nxopen.routing
-
- ControlPointCollection - Interface in nxopen.routing
-
- ControlPointCollection.CheckExisting - Class in nxopen.routing
-
- ControlPointCollection.CreateControlPointData - Class in nxopen.routing
-
- ControlPointCollection.FoundExisting - Class in nxopen.routing
-
- controlPointCollector() - Method in interface nxopen.mechanicalrouting.SplitBuilder
-
Returns the Rcp type of the selected object
License requirements: routing_base ("Routing Basic")
.
- controlPointEnd() - Method in interface nxopen.routing.IPath
-
Returns the end ControlPoint for an IPath object.
- controlPointOffset() - Method in interface nxopen.cam.HoleDrillingBuilder
-
Returns the control point offset type
License requirements: None.
- controlPoints() - Method in interface nxopen.routing.RouteManager
-
ControlPoint collection .
- controlPointSelection() - Method in interface nxopen.mechanicalrouting.AssignCornerBuilder
-
Returns the routing control points collector
License requirements: routing_base ("Routing Basic")
.
- controlPointStart() - Method in interface nxopen.routing.IPath
-
Returns the start ControlPoint for an IPath object.
- controlPointType() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the control point type
License requirements: None.
- controlPoleManager() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the control pole manager
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- controlPoleManager() - Method in interface nxopen.features.StudioXformBuilder
-
- controlPoleManager() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the control pole manager
License requirements: None.
- controlPoleManager() - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
Returns the control pole manager
License requirements: None.
- ControlPoleManagerData - Interface in nxopen.geometricutilities
-
This class manages the control poles for a set of surfaces or curves.
- ControlPoleManagerData.PolesData - Class in nxopen.geometricutilities
-
- ControlPort - Interface in nxopen.motion
-
Represents a motion control port object class.
- controlPort() - Method in interface nxopen.motion.DriverOperation
-
Returns the control port
License requirements: mechanisms ("MECHANISMS")
.
- ControlPortCollection - Interface in nxopen.motion
-
Represents a collection of Control Port objects
To obtain an instance of this class, refer to
ControlInput
Created in NX11.0.0
- controlPorts() - Method in interface nxopen.motion.ControlInput
-
- controlPtDisplay - Variable in class nxopen.uf.UFPatt.AskParamsData
-
- controlRadius() - Method in interface nxopen.features.ReplaceBlendBuilder
-
Returns the control radius to replace blend.
- controlRegion() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- controlRegion() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the control region.
- controlSheetSelection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the control face selection
License requirements: None.
- controlSurface() - Method in interface nxopen.features.OvercrownBuilder
-
Returns the Control Surface when the Global Shaping Operator control is by
Function.
- controlTextIndex() - Method in interface nxopen.annotations.CustomSymbolTextData
-
- controlType() - Method in interface nxopen.cam.LeadAngles
-
Returns the lead angle control type
License requirements: None.
- controlVoltage() - Method in interface nxopen.ame.EplanSettingsBuilder
-
Returns the control voltage
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- conType - Variable in class nxopen.uf.UFSket.ReadGeometricConstraintData
-
- CONVECTION_COEFFICIENT - Static variable in class nxopen.cae.Result.Quantity
-
- CONVECTION_COEFFICIENT - Static variable in class nxopen.cae.XyFunctionMeasure
-
Convection Coefficient
- CONVECTION_COEFFICIENT_BTU_HR_FT2DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: Btu/hr-ft^2-dF
- CONVECTION_COEFFICIENT_BTU_HR_IN2DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: Btu/hr-in^2-dF
- CONVECTION_COEFFICIENT_BTU_SEC_FT2DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: Btu/sec-ft^2-dF
- CONVECTION_COEFFICIENT_BTU_SEC_IN2DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: Btu/sec-in^2-dF
- CONVECTION_COEFFICIENT_LBFIN_SEC_IN2DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: lbf-in/sec-in^2-dF
- CONVECTION_COEFFICIENT_MICROWATT_MM2DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: microW/mm^2-dC
- CONVECTION_COEFFICIENT_MWATT_MM2DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: mW/mm^2-dC
- CONVECTION_COEFFICIENT_MWATT_MM2DEGK - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: mW/mm^2-dK
- CONVECTION_COEFFICIENT_WATT_CM2DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: W/cm^2-dC
- CONVECTION_COEFFICIENT_WATT_IN2DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: W/in^2-dC
- CONVECTION_COEFFICIENT_WATT_M2DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: W/m^2-dC
- CONVECTION_COEFFICIENT_WATT_MM2DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: W/mm^2-dC
- CONVECTION_COEFFICIENT_WM2DEGK - Static variable in class nxopen.cae.XyFunctionUnit
-
Convection Coefficient unit: W/m^2-dK
- CONVECTIVE_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- CONVENTIONAL - Static variable in class nxopen.cam.AreaMillingContainment.CutDirectionTypes
-
Conventional
- CONVENTIONAL - Static variable in class nxopen.cam.CutDirection.Types
-
Conventional Cut
- CONVENTIONAL - Static variable in class nxopen.cam.CylinderMillingCutParameters.CutDirectionTypes
-
Conventional cut
- CONVENTIONAL - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirType
-
conventional
- CONVENTIONAL - Static variable in class nxopen.cam.FeatureMillingCutParameters.CuttingDirectionTypes
-
Conventional cut
- CONVENTIONAL - Static variable in class nxopen.cam.FlowCutSteepContainment.CutDirectionTypes
-
Conventional
- CONVENTIONAL - Static variable in class nxopen.cam.SurfaceContourBuilder.CutDirectionTypes
-
Conventional Cut
- CONVENTIONAL - Static variable in class nxopen.cam.ThreadMillingCutParameters.CutDirectionTypes
-
Conventional cut
- convergenceSpeedType() - Method in interface nxopen.optimization.OptimizationBuilder
-
Returns the convergence speed type
License requirements: None.
- CONVERGENT - Static variable in class nxopen.DxfdwgImporter.FacetImportAs
-
Convergent bodies
- CONVERGENT - Static variable in class nxopen.Edge.EdgeType
-
Convergent edge
- CONVERGENT - Static variable in class nxopen.Face.FaceType
-
Convergent face
- CONVERGENT - Static variable in class nxopen.facet.PolygonModelingBuilder.ConvertTypes
-
- CONVERGENT_BODY - Static variable in class nxopen.facet.ConvertFacetBodyBuilder.OutputTypes
-
Convert To Convergent bodies
- CONVERGENT_BODY - Static variable in class nxopen.facet.FacetBodyFromBodyBuilder.OutputTypes
-
Convert To Convergent bodies
- ConvergentFacet - Interface in nxopen
-
Represents a facet from convergent topology.
- ConvergentFacet.PlaneEquationData - Class in nxopen
-
- ConversionProcessSettingsBuilder - Interface in nxopen.drawings
-
- ConversionProcessSettingsBuilder.ActionOnErrorEnum - Class in nxopen.drawings
-
enum is used to list out different Action on error types
- conversionSettings() - Method in interface nxopen.drawings.SettingsBuilder
-
Returns the Component settings builder which stores the component settings
License requirements: None.
- conversionType() - Method in interface nxopen.pdm.PartOperationImportBuilder
-
Returns the conversion type
License requirements: None.
- convert(FacetedBody, FacetedBodyCollection.Type) - Method in interface nxopen.facet.FacetedBodyCollection
-
Converts the internal representation of this faceted body to the specified type.
- CONVERT - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Types
-
the direct unfold type of convert to Sheet Metal
- convert(Unit, Unit, double) - Method in interface nxopen.UnitCollection
-
Convert a value from one unit of measure to another
License requirements: None.
- CONVERT_FEATURE_GROUPTO_DESIGN_GROUP - Static variable in class nxopen.geometricutilities.ConvertFeatureGroupsToDesignGroupsBuilder.ConversionScheme
-
- convertAnalyticToConvergentAngularTolerance() - Method in interface nxopen.preferences.PartModeling
-
Returns the angular tolerance for converting analytic body to Convergent body
License requirements: None.
- convertAnalyticToConvergentAngularTolerance() - Method in interface nxopen.preferences.SessionModeling
-
- convertAnalyticToConvergentDistanceTolerance() - Method in interface nxopen.preferences.PartModeling
-
Returns the distance tolerance for converting analytic body to Convergent body
License requirements: None.
- convertAnalyticToConvergentDistanceTolerance() - Method in interface nxopen.preferences.SessionModeling
-
- convertAnnotation() - Method in interface nxopen.drawings.ViewSettingsBuilder
-
Returns the convert annotation
License requirements: None.
- convertColorNumberToRGBValue(int) - Method in interface nxopen.preferences.PartObject
-
Converts color number to RGB constituents.
- convertConicToGen(UFCurve.Conic) - Method in interface nxopen.uf.UFCurve
-
- convertConicToStd(UFCurve.Genconic) - Method in interface nxopen.uf.UFCurve
-
- ConvertConicToStdData() - Constructor for class nxopen.uf.UFCurve.ConvertConicToStdData
-
- convertCustomWidths(UFPlot.Units, UFCgm.CustomWidths) - Method in interface nxopen.uf.UFPlot
-
- ConvertDraftingContentsBuilder - Interface in nxopen.drawings
-
- ConvertDraftingContentsBuilder.SelectConversionEntityType - Class in nxopen.drawings
-
enum is used to list out different entity that can be use for conversion
- ConvertEccentricLinearToLinear - Class in nxopen.routing
-
Option to query if an existing
ISegment
is a eccentric segment.
- convertEccentricLinearToLinear() - Method in interface nxopen.routing.ISegment
-
Is line segment eccentric converted to line segment?
- convertEccentricSegment() - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Returns the conversion flag.
- CONVERTED - Static variable in class nxopen.routing.ConvertEccentricLinearToLinear
-
Is converted Eccentric linear to linear
- CONVERTED - Static variable in class nxopen.routing.ConvertLinearToEccentricLinear
-
Is converted linear to Eccentric linear
- convertedstraindata - Variable in class nxopen.MaterialUtilities.ConvertStressStrainData
-
the output strain array
- convertedstraindata - Variable in class nxopen.MaterialUtilities.ConvertStressStrainYoungsModulusData
-
the output strain array
- convertedstressdata - Variable in class nxopen.MaterialUtilities.ConvertStressStrainData
-
the output stress array
- convertedstressdata - Variable in class nxopen.MaterialUtilities.ConvertStressStrainYoungsModulusData
-
the output stress array
- convertedyoungsmodulus - Variable in class nxopen.MaterialUtilities.ConvertStressStrainYoungsModulusData
-
the output converted Youngs Modulus which is in sync with converted stress and strain
- ConvertFacetBodyBuilder - Interface in nxopen.facet
-
- ConvertFacetBodyBuilder.OriginalBodyOptions - Class in nxopen.facet
-
These represent the options for handling the input facet bodies
- ConvertFacetBodyBuilder.OutputTypes - Class in nxopen.facet
-
These options represent the type of output facet body
- ConvertFeatureGroupsToDesignGroupsBuilder - Interface in nxopen.geometricutilities
-
- ConvertFeatureGroupsToDesignGroupsBuilder.ConversionScheme - Class in nxopen.geometricutilities
-
Conversion Scheme for Feature Groups
- ConvertFeatureGroupsToModulesBuilder - Interface in nxopen.geometricutilities
-
- convertFile(String, UFPlot.Format, String) - Method in interface nxopen.uf.UFPlot
-
- convertFileNameToCli(String) - Method in interface nxopen.uf.UFUgmgr
-
- convertFrecToBuilderData(NXObject) - Method in interface nxopen.tooling.CreateBoxBuilder
-
Convert feature record data to builder.
- ConvertFromDieValidationBuilder - Interface in nxopen.presslinesimulation
-
Use this builder to convert a simulation job done in Die Validation to Press Line Simulation.
- ConvertFromMCDBuilder - Interface in nxopen.cam
-
- ConvertFromMCDBuilder.MachineTypes - Class in nxopen.cam
-
Represents the machine type option.
- ConvertFromMCDBuilder.PocketLocationTypes - Class in nxopen.cam
-
Represents the pocket location option.
- ConvertFromMTBBuilder - Interface in nxopen.mechatronics
-
- ConvertInputListItemBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Sheetmetal convert to sheet metal corner list item builder class.
- ConvertInputListItemBuilderList - Interface in nxopen.features.sheetmetal
-
Represents a list of objects.
- convertLabelToNote(NoteBase) - Method in interface nxopen.cae.CaeNoteBuilder
-
Covert CAE Label to Note
License requirements: nx_masterfem ("Finite Element Modeling")
.
- ConvertLayoutToSheetBuilder - Interface in nxopen.layout2d
-
- ConvertLayoutToSheetBuilder.ScaleData - Class in nxopen.layout2d
-
- ConvertLayoutToSheetBuilder.SheetProjectionAngleType - Class in nxopen.layout2d
-
the drawing sheet projection angle
- convertLegacy() - Method in interface nxopen.weld.CustomManager
-
Method to convert all legacy weld points to the
PointMarkPoint
class
License requirements: None.
- convertLegacy(Feature[]) - Method in interface nxopen.weld.CustomManager
-
Method to convert selected legacy weld point feature sets to the
PointMarkPoint
class
License requirements: None.
- convertLegacy(Feature[], boolean) - Method in interface nxopen.weld.CustomManager
-
Method to convert weld point feature sets to the
PointMarkPoint
class
License requirements: None.
- convertLegacyViewsToLightweight(DraftingView[]) - Method in interface nxopen.drawings.DraftingViewCollection
-
Converts legacy views to lightweight.
- ConvertLinearToEccentricLinear - Class in nxopen.routing
-
Option to query if an existing
ISegment
is a eccentric segment.
- convertLinearToEccentricLinear() - Method in interface nxopen.routing.ISegment
-
Is line segment converted to eccentric line segment?
- convertLinksToUseProductInterface() - Method in interface nxopen.uf.UFWave
-
- convertLocationToCoordinatesType(int, int) - Method in interface nxopen.cae.connections.ILocationsContainer
-
Convert a location to coordinates.
- convertMatingConditions() - Method in interface nxopen.positioning.MatingConverter
-
Converts Mating Conditions to Assembly Constraints according to the
properties defined on this
MatingConverter
object.
- convertNameFromCli(String) - Method in interface nxopen.uf.UFUgmgr
-
- convertNameToCli(String) - Method in interface nxopen.uf.UFUgmgr
-
- convertNoteToLabel(NoteBase) - Method in interface nxopen.cae.CaeNoteBuilder
-
Covert CAE Note to Label
License requirements: nx_masterfem ("Finite Element Modeling")
.
- convertNurbsToPositionData(UFVariant, int, int, int, double, double) - Method in interface nxopen.uf.UFSim
-
- ConvertNurbsToPositionData() - Constructor for class nxopen.uf.UFSim.ConvertNurbsToPositionData
-
- convertObjectsToAdd(DisplayableObject[]) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Converts the selected objects to acceptable one and add to the selection list.
- convertObjectsToRemove(DisplayableObject[]) - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Converts the selected objects to acceptable one and remove it from the selection list.
- convertOdbFile(String, String) - Method in interface nxopen.cae.ResultManager
-
Convert older version of ODB file to currently supported version
License requirements: None.
- convertOffsetPaths(OffsetPath) - Method in interface nxopen.routing.OffsetPathCollection
-
Converts an offset path into
Constraint
objects applied to the copied routing objects.
- convertOverstockApplication(ControlPoint, ISegment[], Stock[], CharacteristicList, CharacteristicList, Expression, Overstock[]) - Method in interface nxopen.routing.OverstockApplicationCollection
-
- convertOverstockApplication(ControlPoint, ISegment[], Stock[], Expression, Expression, Expression, Expression, Expression, Point, CharacteristicList, CharacteristicList, Expression, Overstock[]) - Method in interface nxopen.routing.OverstockApplicationCollection
-
- convertOverstockApplication(ControlPoint, ISegment[], Stock[], Point, Point, CharacteristicList, CharacteristicList, Expression, Overstock[]) - Method in interface nxopen.routing.OverstockApplicationCollection
-
- convertOverstockApplication(ControlPoint, ISegment[], Stock[], Point, PointDefinition, Expression, CharacteristicList, CharacteristicList, Expression, Overstock[]) - Method in interface nxopen.routing.OverstockApplicationCollection
-
- convertParameters(NXObject) - Method in interface nxopen.features.StudioXformBuilder
-
- convertParameters(NXObject) - Method in interface nxopen.features.StudioXformBuilderEx
-
Converts parameters of the feature that owns selected xform object.
- convertPreNX9CompoundWelds() - Method in interface nxopen.Part
-
Convert any existing pre-NX9 Compound Weld User Defined Objects to NX features.
- convertPrev16Aligns(int, UFAssem.Prev16Align) - Method in interface nxopen.uf.UFAssem
-
- ConvertPrev16AlignsData() - Constructor for class nxopen.uf.UFAssem.ConvertPrev16AlignsData
-
- convertPrimaryTolerance() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the convert primary tolerance option.
- convertPrimaryToleranceToDualDimensionUnit() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the flag indicating whether to convert the primary tolerance to dual dimension unit
License requirements: None.
- convertPropUnits(UFWeight.Properties, UFWeight.UnitsType) - Method in interface nxopen.uf.UFWeight
-
- convertReferenceGeometry(int, DisplayableObject) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Converts the selected reference geometry.
- convertRememberedMcs() - Method in interface nxopen.assemblies.ComponentAssembly
-
Converts all remembered mating constraints in the part of this assembly to remembered
assembly constraints
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- convertRGBValueToColorNumber(ViewVisualizationSpecialEffects.ColorRGB) - Method in interface nxopen.preferences.PartObject
-
Converts RGB color constituents to color number.
- convertSeamCurves() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Converts intersection seam curves to edges on the linked bodies if found.
- ConvertSheetToLayoutBuilder - Interface in nxopen.layout2d
-
- convertSlotDimensionAssociativity() - Method in interface nxopen.annotations.ISlotDimension
-
Convert this dimension's associativity if it is a slot dimension.
- convertSplineSegments() - Method in interface nxopen.routing.RouteManager
-
Converts all of the spline segments in this part from the pre-NX9 data model
to the NX9 data model.
- ConvertSplineSegmentsData() - Constructor for class nxopen.routing.RouteManager.ConvertSplineSegmentsData
-
- convertStockDataToBuilder(NXObject) - Method in interface nxopen.tooling.StockSizeBuilder
-
Convert stock size object data to builder.
- convertStressStrainData(double[], double[], double, double, MaterialUtilities.StressStrainData, MaterialUtilities.StressStrainData) - Method in interface nxopen.MaterialUtilities
-
- ConvertStressStrainData() - Constructor for class nxopen.MaterialUtilities.ConvertStressStrainData
-
- convertStressStrainYoungsModulusData(double[], double[], double, double, MaterialUtilities.StressStrainData, MaterialUtilities.StressStrainData) - Method in interface nxopen.MaterialUtilities
-
Convert stress strain data between the four types EngineeringStressEngineeringStrain,
EngineeringStressEngineeringPlasticStrain, TrueStressLogStrain and TrueStressLogPlasticStrain.
- ConvertStressStrainYoungsModulusData() - Constructor for class nxopen.MaterialUtilities.ConvertStressStrainYoungsModulusData
-
- convertToAreaTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
-
Converts a datum target point, line, or non-rectangular area to a rectangular area.
- ConvertToConvergentBodyBuilder - Interface in nxopen.cae
-
- ConvertToConvergentBodyBuilder.Option - Class in nxopen.cae
-
Represents the supported export locations of convergent body
- convertToDraftingAreaTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
-
Converts a drafting datum target point, line, or non-rectangular area to a drafting rectangular area.
- convertToDraftingLineTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
-
Converts a drafting datum target point or area to a drafting datum target line.
- convertToDraftingPointTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
-
Converts a drafting datum target line or area to a drafting datum target point.
- convertToFeatures() - Method in interface nxopen.routing.PortCollection
-
- convertToFixedDatum(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- convertToFloatingFeatureGroups() - Method in interface nxopen.features.FeatureCollection
-
Converts sequential feature groups to floating feature groups
License requirements: solid_modeling ("SOLIDS MODELING")
.
- ConvertToFromReferenceBuilder - Interface in nxopen
-
- ConvertToFromReferenceBuilder.OutputType - Class in nxopen
-
Represents the output type.
- convertToGdt(SimpleDraftingAid, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
-
Converts a simple drafting aid into a GDT by creating a new GDT
using the text, origin, and preferences from the drafting aid.
- convertToIdSymbol(SimpleDraftingAid, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
-
Converts a simple drafting aid into an ID symbol by creating a new
ID symbol using the text, origin, and preferences from the drafting aid.
- convertToLabel(SimpleDraftingAid, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
-
Converts a simple drafting aid into a label by creating a new label
using the text, origin, and preferences from the drafting aid.
- convertToLineTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
-
Converts a datum target point or area to a datum target line.
- convertToLineWeld(LineWeld, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
-
Converts a simple drafting aid into a line weld by creating a new line weld
using the text, origin, and preferences from the drafting aid.
- convertToLinkedBody() - Method in interface nxopen.features.Brep
-
Converts unparameterized feature to linked body
License requirements: solid_modeling ("SOLIDS MODELING")
.
- convertToLinkedBody() - Method in interface nxopen.features.PromotionBuilder
-
Returns the flag denoting whether the Promotion feature will convert to linked body
License requirements: None.
- convertToLinksTable(FieldTable) - Method in interface nxopen.fields.FieldManager
-
- convertToModel(Tag, Tag) - Method in interface nxopen.uf.UFView
-
- convertToNewFeatureGroups() - Method in interface nxopen.features.FeatureCollection
-
- convertToNonSpreadsheetTabnote(Tag) - Method in interface nxopen.uf.UFTabnot
-
- convertToNote(SimpleDraftingAid, boolean) - Method in interface nxopen.annotations.AnnotationManager
-
Converts a simple drafting aid into a note by creating a new note
using the text, origin, and preferences from the drafting aid.
- convertToNx10Spline(Spline) - Method in interface nxopen.Sketch
-
Convert the legacy splines to new NX10 splines.
- convertToOriginalModelView() - Method in interface nxopen.drawings.AnnotationSettingsBuilder
-
Returns the convert to original model view
License requirements: None.
- convertToPMIBuilderManager() - Method in interface nxopen.BasePart
-
Returns the Drawings.BuilderManager belonging to this part
Created in NX11.0.0
- ConvertToPMIBuilderManager - Interface in nxopen.drawings
-
- convertToPointTarget() - Method in interface nxopen.annotations.DraftingDatumTarget
-
Converts a datum target line or area to a datum target point.
- convertToReference() - Method in interface nxopen.SketchMakeSymmetricBuilder
-
Returns the function returns the flag to indicate if the centerline needs to be converted to reference
License requirements: None.
- convertToReference() - Method in interface nxopen.SketchMirrorPatternBuilder
-
Returns the flag to indicate if the centerline needs to be converted to reference
License requirements: None.
- convertToReference() - Method in interface nxopen.SketchOffsetBuilder
-
Returns the flag to indicate if the input curves needs to converted to reference
License requirements: None.
- convertToSequentialFeatureGroups() - Method in interface nxopen.features.FeatureCollection
-
Converts floating feature groups to sequential feature groups
License requirements: solid_modeling ("SOLIDS MODELING")
.
- convertToSew() - Method in interface nxopen.features.BooleanBuilder
-
Returns the convert to sew flag
License requirements: None.
- ConvertToSheetmetal - Interface in nxopen.features
-
Represents a ConvertToSheetmetal feature
To create or edit an instance of this class, use
ConvertToSheetmetalBuilder
Created in NX5.0.0
- ConvertToSheetmetalBuilder - Interface in nxopen.features.sheetmetal
-
This is the feature builder for the convert to sheetmetal feature.
- ConvertToSheetmetalBuilder.BendReliefTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the bend relief type.
- convertToSmartPlane() - Method in interface nxopen.Plane
-
Convert a fixed plane to a smart plane object to allow applying constraints to the plane.
- convertToStockAsComponents(boolean, ComponentName) - Method in interface nxopen.routing.StockCollection
-
Converts a part file from Legacy Stock into Stock as Components.
- convertToStockAsComponents(Tag, boolean, boolean, boolean) - Method in interface nxopen.uf.UFRoute
-
- convertToView(Tag, Tag) - Method in interface nxopen.uf.UFView
-
- convertTransformWeld(Feature[]) - Method in interface nxopen.weld.CustomManager
-
Method to convert
Transform
to their parent type.
- convertType() - Method in interface nxopen.facet.PolygonModelingBuilder
-
Returns the convert type
License requirements: None.
- convertType() - Method in interface nxopen.tooling.AssignPatchBuilder
-
Returns the option to convert to have copies or no copies for all selected sheets.
- convertUnitsOnModifiedParts - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- convertUnitsOnReadOnlyModifiedParts - Variable in class nxopen.uf.UFAssem.AssemblyDeformPartData
-
- convertValue(double, Tag, Tag) - Method in interface nxopen.uf.UFUnit
-
- convertWorkPartAndLoadedChildrenOption() - Method in interface nxopen.routing.StockPartConverterBuilder
-
Returns the convert workpart and loaded children option.
- CONVEX - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- CONVEX - Static variable in class nxopen.annotations.SupplementarySymbol
-
Specifies convex supplementary weld symbol
- CONVEX - Static variable in class nxopen.features.LabelChamferBuilder.ChamferOrientType
-
- CONVEX - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Convex
- CONVEX - Static variable in class nxopen.weld.FilletBuilder.EnumContour
-
- CONVEX - Static variable in class nxopen.weld.PlugSlotBuilder.EnumContour
-
- CONVEX - Static variable in class nxopen.weld.WeldContourShape
-
Convex shape
- CONVEX - Static variable in class nxopen.weld.WeldGrooveBuilder.Contour
-
Convex
- CONVEX_FIRST - Static variable in class nxopen.features.EdgeBlendBuilder.OrderOfBlending
-
Convex first
- CONVEX_HULL - Static variable in class nxopen.cam.CutParametersSimplifyShapesTypes
-
convex hull
- CONVEX_HULL - Static variable in class nxopen.sim.SinumerikCaSimplifyBodiesBuilder.ObjectToReplaceWithTypes
-
Convex Hull
- convexComb(double, double[], double[]) - Method in interface nxopen.uf.UFVec2
-
- convexComb(double, double[], double[]) - Method in interface nxopen.uf.UFVec3
-
- convexConcaveY() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the Special blend at convex / concave Y option
License requirements: None.
- convexCorner() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the convex_corner
License requirements: cam_base ("CAM BASE")
.
- convexCorner() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the convex_corner
License requirements: cam_base ("CAM BASE")
.
- convexity() - Method in interface nxopen.features.EmbossRegion
-
Returns the convexity option
License requirements: None.
- convexityDirection() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the convexity direction.
- convexityEnabled() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the toggle that determines whether to constrain convexity
License requirements: None.
- ConvexMeshBuilder - Interface in nxopen.cae
-
- ConvexMeshBuilder.OffsetMethodOption - Class in nxopen.cae
-
- convexRadius() - Method in interface nxopen.facet.CurvatureBuilder
-
Returns the convex radius threshold
License requirements: None.
- convexRadius() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the convex radius of the spherial mirror.
- CONVEYOR - Static variable in class nxopen.linedesigner.DBNode.NodeType
-
- ConveyorStationFeature - Interface in nxopen.linedesigner
-
- ConveyorStationFeatureBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.ConveyorStationFeature
builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createConveyorStationFeatureBuilder
Default values.
- ConveyorStationFeatureBuilder.Type - Class in nxopen.linedesigner
-
This enum is providing possible types of station feature
- convLayoutData() - Method in interface nxopen.DxfdwgImporter
-
Returns the Import Layout data command - if set to true then Layout data will be imported
License requirements: None.
- convLayouts() - Method in interface nxopen.DxfdwgImporter
-
Returns the ConvLayouts command - this will determine if all or selected layouts are translated
License requirements: None.
- convModelData() - Method in interface nxopen.DxfdwgImporter
-
Returns the Import model data command - if set to true then Model data will be imported
License requirements: None.
- coolant() - Method in interface nxopen.cam.CycleCoolant
-
Returns the coolant mode
License requirements: None.
- COOLANT_TYPE_FLOOD - Static variable in class nxopen.uf.UFPath.CoolantType
-
- COOLANT_TYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.CoolantType
-
- COOLANT_TYPE_MIST - Static variable in class nxopen.uf.UFPath.CoolantType
-
- COOLANT_TYPE_ON - Static variable in class nxopen.uf.UFPath.CoolantType
-
- COOLANT_TYPE_TAP - Static variable in class nxopen.uf.UFPath.CoolantType
-
- coolantBeforeCut() - Method in interface nxopen.cam.Cycle
-
Returns the coolant
License requirements: None.
- coolantBeforeEngage() - Method in interface nxopen.cam.Cycle
-
Returns the coolant
License requirements: None.
- coolantBeforeRetract() - Method in interface nxopen.cam.Cycle
-
Returns the coolant
License requirements: None.
- coolantThrough() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the coolant through parameter
License requirements: None.
- coolingConnect() - Method in interface nxopen.tooling.ToolingManager
-
Returns the CoolingConnectCollection instance belonging to this part .
- CoolingConnectBuilder - Interface in nxopen.tooling
-
The builder class for Cooling connection which assists you
to create channel and connect it to other channels.
- CoolingConnectCollection - Interface in nxopen.tooling
-
Creates a CoolingConnect Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
- coolingDefineChannel() - Method in interface nxopen.tooling.ToolingManager
-
Returns the CoolingDefineChannelCollection instance belonging to this part .
- CoolingDefineChannelBuilder - Interface in nxopen.tooling
-
The builder class for Cooling Define Channel which assists you
to create channels directly.
- CoolingDefineChannelBuilder.ExtensionTypes - Class in nxopen.tooling
-
The extension types of channel
- CoolingDefineChannelBuilder.TipEndTypes - Class in nxopen.tooling
-
The tip end types of channel
- CoolingDefineChannelBuilder.Types - Class in nxopen.tooling
-
Types to specify how to assign attributes to the created body.
- CoolingDefineChannelCollection - Interface in nxopen.tooling
-
Creates a CoolingDefineChannel Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
- coolingExtend() - Method in interface nxopen.tooling.ToolingManager
-
Returns the CoolingExtendCollection instance belonging to this part .
- CoolingExtendBuilder - Interface in nxopen.tooling
-
The builder class for Channel Extend which assists you
to extend the channel.
- CoolingExtendBuilder.TipEndTypes - Class in nxopen.tooling
-
The tip end types of channel
- CoolingExtendCollection - Interface in nxopen.tooling
-
Creates a CoolingExtend Collection.
- CoolingFittingData - Interface in nxopen.tooling
-
Represents the cooling fitting data in Add Channel Fitting Builder.
- coolingPattern() - Method in interface nxopen.tooling.ToolingManager
-
Returns the CoolingPatternCollection instance belonging to this part .
- CoolingPatternBuilder - Interface in nxopen.tooling
-
The builder class for Cooling pattern which assists you
to create channels with selected curves.
- CoolingPatternCollection - Interface in nxopen.tooling
-
Creates a CoolingPattern Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- coorderr - Variable in class nxopen.cae.Post.ASCIIDiffTolerances
-
error allowed on coordinate values
- coordinate() - Method in interface nxopen.cae.AfuHeaderId
-
Returns the coordinate of AFU Header Id
License requirements: None.
- COORDINATE - Static variable in class nxopen.cam.GeometryGroup.PositionTypes
-
ipw position using coordinate system
- coordinate() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the center coordinate
License requirements: None.
- COORDINATE_NOTE - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI coordinate note type
- COORDINATE_NOTE - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes
-
coordinate note
- COORDINATE_NOTE_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- COORDINATE_SYSTEM - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- COORDINATE_SYSTEM - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsMatOrientationMethod
-
Use a coordinate system to orient the material.
- COORDINATE_SYSTEM - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
BASE_PROPERTY_TABLE_property_type_coordinate_system
- COORDINATE_SYSTEM - Static variable in class nxopen.cae.ShellEADBuilder.MaterialOrientationMethod
-
use a coordinate system to orient the material
- COORDINATE_SYSTEM - Static variable in class nxopen.die.DieDirectionBuilder.DirectionType
-
Define a coordinate system (-Z) for the direction.
- COORDINATE_SYSTEM - Static variable in class nxopen.die.DiePlaneBuilder.PlaneType
-
Define a coordinate system to specify the plane.
- COORDINATE_SYSTEM - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Coordinate system
- COORDINATE_SYSTEM - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Coordinate System
- COORDINATE_SYSTEM - Static variable in class nxopen.weld.JointmarkBuilder.OrientationMethodTypes
-
Use fixed csys instead of surface normals.
- COORDINATE_SYSTEM_DATA - Static variable in class nxopen.cae.ShellEADBuilder.MaterialOrientationMethod
-
use coordinate system raw data to orient the material
- COORDINATE_TOLERANCE - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Coordinate
- COORDINATE_VALUE_OF_COORDINATE_SYSTEM_AXIS - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.Xaxis
-
- coordinateAxes() - Method in interface nxopen.sim.KinematicChain
-
Returns the coordinate axes name of the kinematic chain
License requirements: None.
- coordinateIndex() - Method in interface nxopen.cae.qualityaudit.FreeEdgeDistanceResult
-
Returns the coordinate index of the close to the edge point in the location.
- coordinateIndex() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedElementCreationResult
-
Returns the coordinate index of the failing element creation in the location.
- coordinateIndex() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedProjectionResult
-
Returns the coordinate index of the failing projection in the location.
- coordinateIndex() - Method in interface nxopen.cae.qualityaudit.MeshLevelFailedProjectionToleranceResult
-
Returns the coordinate index of the tolerance failing mesh projection in the location.
- coordinateIndex() - Method in interface nxopen.cae.qualityaudit.ObjectLevelCorrectedProjectionResult
-
Returns the coordinate index of the corrected projection in the location.
- coordinateIndex() - Method in interface nxopen.cae.qualityaudit.ObjectLevelFailedProjectionResult
-
Returns the coordinate index of the failing projection in the location.
- coordinateIndex() - Method in interface nxopen.cae.qualityaudit.ObjectLevelFailedProjectionToleranceResult
-
Returns the coordinate index of the tolerance failing projection in the location.
- coordinateIndex1() - Method in interface nxopen.cae.qualityaudit.ConnectionPointsDistanceResult
-
Returns the coordinate index of the first point in the first location.
- coordinateIndex2() - Method in interface nxopen.cae.qualityaudit.ConnectionPointsDistanceResult
-
Returns the coordinate index of the second point in the second location.
- CoordinateNote - Interface in nxopen.annotations
-
Represents a Coordinate Note
To create or edit an instance of this class, use
CoordinateNoteBuilder
Created in NX6.0.0
- CoordinateNoteBuilder - Interface in nxopen.annotations
-
- coordinateOption() - Method in interface nxopen.geometricutilities.PointsFromFileBuilder
-
Returns the option indicating type of point coordinates
License requirements: None.
- coordinatePlane() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
Returns the coordinateplane
License requirements: None.
- coordinatePlane() - Method in interface nxopen.sim.KinematicChain
-
Returns the coordinate plane type of the kinematic chain
License requirements: None.
- coordinates() - Method in interface nxopen.cae.CAEVertex
-
Returns the vertex cooridnates
License requirements: None.
- COORDINATES - Static variable in class nxopen.cae.connections.LocationType
-
Coordinates
- coordinates() - Method in interface nxopen.cae.CoordinateSelectionRecipe
-
Returns the target coordinates.
- coordinates() - Method in interface nxopen.cae.FENode
-
Returns the node cooridnates in absolute space
License requirements: None.
- coordinates() - Method in interface nxopen.cae.MeshPoint
-
Returns the coordinates of the point
License requirements: None.
- coordinates() - Method in interface nxopen.cae.NodeElementInfoBuilder
-
Returns the coordinates
License requirements: None.
- coordinates - Variable in class nxopen.cae.Post.StreamlineSeed
-
- coordinates() - Method in interface nxopen.Point
-
Returns the coordinates of the point
License requirements: None.
- coordinates() - Method in interface nxopen.SubdivisionMeshVertex
-
Returns the position of the vertex.
- CoordinateSelectionRecipe - Interface in nxopen.cae
-
Represents a single node selection recipe based on coordinates
To obtain an instance of this object use one of the creators in
SelectionRecipeCollection
.
- CoordinatesLocation - Interface in nxopen.cae.connections
-
Location interface.
- CoordinatesSeriesLocation - Interface in nxopen.cae.connections
-
Location interface.
- coordinatesystem - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBushingData
-
Coordinate system for orienting by coordinate system.
- coordinatesystem - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskGapData
-
Coordinate system for orienting by coordinate system.
- coordinatesystem - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
Coordinate system for orienting by coordinate system.
- coordinateSystem() - Method in interface nxopen.cae.LaminateGraphicalReportBuilder
-
Returns the coordinate system for failure index, strength ratio and margin of safety calculation
License requirements: None.
- CoordinateSystem - Class in nxopen.cae.responsesimulation
-
Specifies the coordinate system
- coordinateSystem() - Method in interface nxopen.cae.responsesimulation.ElementalFunctionEvaluationSettingBuilder
-
Returns the coordinate system
License requirements: nx_response_anlys ("NX Response Analysis")
.
- coordinateSystem() - Method in interface nxopen.cae.responsesimulation.NodalFunctionEvaluationSettingBuilder
-
Returns the coordinate system
License requirements: nx_response_anlys ("NX Response Analysis")
.
- coordinateSystem() - Method in interface nxopen.cae.responsesimulation.PrlResultsEvaluationSettingBuilder
-
Returns the coordinate system.
- coordinateSystem - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- coordinateSystem() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the get coordinate system method gets the coordinate system for orienting by coordinate system
License requirements: nx_masterfem ("Finite Element Modeling")
.
- coordinateSystem() - Method in interface nxopen.cam.CAMFeature
-
Returns the coordinate system of the CAMFeature
License requirements: None.
- coordinateSystem() - Method in interface nxopen.cam.MachiningFeature
-
Returns the csys feature
License requirements: None.
- CoordinateSystem - Interface in nxopen
-
Represents a coordinate system
This is an abstract class
.
- coordinateSystem() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the coordinate system
License requirements: None.
- coordinateSystem() - Method in interface nxopen.features.HelixBuilder
-
Returns the coordinate system
License requirements: None.
- coordinateSystem() - Method in interface nxopen.features.LawCurveBuilder
-
Returns the coordinate system
License requirements: None.
- coordinateSystem() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Returns the coordinate system defining the origin as well as the X and Y axis for shrinkage.
- coordinateSystem() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the coordinate system defining the origin as well as the X and Y axis for the templates.
- coordinateSystem() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
Returns the placement CSYS of the weld cut
The coordinate system is only used for the SpecifyCSYS placement method.
- coordinateSystem() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
Returns the coordinate system
License requirements: None.
- coordinateSystem() - Method in interface nxopen.WCS
-
Returns the CartesianCoordinateSystem associated with the WCS
License requirements: None.
- CoordinateSystem.DirectionsData - Class in nxopen
-
- CoordinateSystemCollection - Interface in nxopen
-
- coordinateSystemMatrix() - Method in interface nxopen.die.DieDirectionBuilder
-
Returns the coordinate system matrix
License requirements: None.
- coordinateSystemMatrix() - Method in interface nxopen.die.DieLocationBuilder
-
Returns the coordinate system matrix
License requirements: None.
- coordinateSystemMatrix() - Method in interface nxopen.die.DiePlaneBuilder
-
Returns the coordinate system matrix
License requirements: None.
- coordinateSystemOffset() - Method in interface nxopen.cae.SolverAppendOption
-
Returns the coordinate system offset
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- coordinateSystemOrigin() - Method in interface nxopen.die.DieDirectionBuilder
-
Returns the coordinate system origin
License requirements: None.
- coordinateSystemOrigin() - Method in interface nxopen.die.DieLocationBuilder
-
Returns the coordinate system origin
License requirements: None.
- coordinateSystemOrigin() - Method in interface nxopen.die.DiePlaneBuilder
-
Returns the coordinate system origin
License requirements: None.
- coordinateSystems() - Method in interface nxopen.BasePart
-
Returns the CoordinateSystemCollection instance belonging to this part .
- coordinateSystemType() - Method in interface nxopen.motion.GraphBuilder
-
- CoordinateType - Class in nxopen.cae.xyplot
-
Represents the swap axis type
- coordinateX() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the x coordinate of wheel center point.
- coordinateX() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the x coordinate of right wheel center point or attachment point.
- coordinateY() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the y coordinate of wheel center point.
- coordinateY() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the y coordinate of right wheel center point or attachment point.
- coordinateZ() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the z coordinate of wheel center point.
- coordinateZ() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the z coordinate of right wheel center point or attachment point.
- coordinatingHoleParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the coordinating hole parent builder of the draw die punch.
- COORDS - Static variable in class nxopen.cae.FreeBodyResultsBuilder.LocationMethod
-
location is defined by coordinates
- coords - Variable in class nxopen.uf.UFDisp.FaceFacetData
-
- coords - Variable in class nxopen.uf.UFGdt.Point
-
- coordSystem() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the placement csys of the bracket
License requirements: None.
- coordSystem() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the coord system (only used for: SpecifyCSYS)
License requirements: None.
- coordSystem() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
- coordSystem() - Method in interface nxopen.features.shipdesign.ShipCutoutBuilder
-
Returns the placement CSYS of the cutout.
- coordSystem() - Method in interface nxopen.features.shipdesign.ShipEndCutBuilder
-
Returns the coord system
License requirements: None.
- coordSystem() - Method in interface nxopen.features.shipdesign.SteelSupportBuilder
-
Returns the coord system (only used with "SpecifyCsys" creation method)
License requirements: None.
- coordSystem() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
Returns the placement CSYS of the weld cut
The coordinate system is only used for the SpecifyCSYS placement method.
- coordSystem() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the csys
License requirements: None.
- coordSystem() - Method in interface nxopen.sim.SinumerikCaSimplifyBodiesBuilder
-
Returns the coordinate system
License requirements: None.
- coordtol - Variable in class nxopen.cae.Post.ASCIIDiffTolerances
-
absolute tolerance on coordinate values
- COPE - Static variable in class nxopen.preferences.RoutingPath.AllowedCornerType
-
UF_ROUTE_AV_CORNERS_COPE
- COPE - Static variable in class nxopen.routing.Corner.Type
-
Cope corner.
- COPE - Static variable in class nxopen.routing.CornerTypeBuilder.Type
-
- CopeCorner - Interface in nxopen.routing
-
The cope corner is a corner that trims stocks at a junction.
- CopeCornerBuilder - Interface in nxopen.routing
-
- CopeCornerCollection - Interface in nxopen.routing
-
- copeCorners() - Method in interface nxopen.routing.RouteManager
-
CopeCorner collection .
- copiedFeature() - Method in interface nxopen.features.UserDefinedFeatureCopyEvent
-
Returns the feature in the destination part
License requirements: None.
- copiedFeature() - Method in interface nxopen.features.UserDefinedFeatureCreateEvent
-
Returns the feature in the destination part
License requirements: None.
- copiedObject - Variable in class nxopen.Sketch.CopyObjectData
-
- copies() - Method in interface nxopen.PlotBuilder
-
Returns the number of copies to be plotted.
- copies() - Method in interface nxopen.PrintBuilder
-
Returns the number of copies.
- copies - Variable in class nxopen.uf.UFTrns.TransformObjectsData
-
- COPIES_OF_INPUT_FEATURES - Static variable in class nxopen.features.PatternFeatureBuilder.OutputOptions
-
Copies of Input features
- COPIES_OF_INPUT_FEATURES_IN_GROUP - Static variable in class nxopen.features.PatternFeatureBuilder.OutputOptions
-
Copies of Input features in Group
- copiesPerParent() - Method in interface nxopen.ame.InsertSettingsBuilder
-
Returns the number of copies to insert per parent
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- COPIOUS_DATA - Static variable in class nxopen.IgesCreator.CrossHatchMapEnum
-
map cross hatch as copious data
- copiousData() - Method in interface nxopen.IgesImporter
-
Returns the copious data mapping
License requirements: None.
- Coplanar - Interface in nxopen.features
-
Represents a Coplanar feature
To create or edit an instance of this class, use
CoplanarBuilder
Created in NX6.0.0
- coplanarAxesEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether coplanar axes relation recognition is enabled
License requirements: None.
- CoplanarBuilder - Interface in nxopen.features
-
- coplanarEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether coplanar relation recognition is enabled
License requirements: None.
- coplanarThreshold() - Method in interface nxopen.cae.FluidDomainBuilder
-
Returns the coplanar decimation threshold - obsolete: always using surface wrapper default values
License requirements: None.
- COPPER - Static variable in class nxopen.tooling.ElectrodeBlankBuilder.BlankMaterial
-
the material of the blank is copper
- copy() - Method in interface nxopen.annotations.PmiFilter
-
Creates a copy of the PMI filter
License requirements: geometric_tol ("GDT")
.
- copy(String, ClearanceSet.CopyMode) - Method in interface nxopen.assemblies.ClearanceSet
-
Makes a copy of a dataset.
- copy(Explosion) - Method in interface nxopen.assemblies.Explosion
-
Copies the component transformations in the source explosion onto the destination explosion.
- copy(CaeRegion) - Method in interface nxopen.cae.CaeRegionCollection
-
Copies a
CaeRegion
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.0.0
- copy(Function, String) - Method in interface nxopen.cae.FunctionCollection
-
Copies a
Function
in the Scenario database of Motion Simulation and
Advanced Simulation.
- copy(SelectionRecipe, String) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Copies a Selection Recipe with all attributes and add it to the collection.
- copy(SimLoadRecipe) - Method in interface nxopen.cae.SimLoadRecipeCollection
-
Copies a Load Recipe with all attributes and add it to the collection.
- COPY - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Result
-
copy
- copy(int[]) - Method in interface nxopen.cam.ObjectContainer
-
Copy CAM Objects
License requirements: None.
- COPY - Static variable in class nxopen.cam.OperationTransformBuilder.Result
-
copy
- COPY - Static variable in class nxopen.drafting.CutCopyPasteBuilder.TypeOperation
-
Copy type
- copy(FacetedBody, Part, FacetedBodyCollection.Type) - Method in interface nxopen.facet.FacetedBodyCollection
-
Copies a faceted body and optionally changes the internal representation to the given type
(This is only valid for JT to NX copy)
License requirements: None.
- copy() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the copy option for move face, don't use it until nx502
License requirements: None.
- copy(NXObject) - Method in interface nxopen.PhysicalMaterial
-
Creates new (copied) material with same properties as the original material.
- COPY - Static variable in class nxopen.report.CommandImporter.OverrideOption
-
Import and append a new one
- copy(String, String, String, String) - Method in interface nxopen.RuleManager
-
Copy a dynamic child or attribute rule.
- COPY - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.DesignToolOption
-
copy
- COPY - Static variable in class nxopen.tooling.InsertEditToolsBuilder.Types
-
copy
- COPY - Static variable in class nxopen.tooling.LayoutRepositionBuilder.Type
-
Copy type
- COPY - Static variable in class nxopen.tooling.ReliefDesignBuilder.Types
-
Copy operation
- copy - Variable in class nxopen.uf.UFClone.CopyNmOpt
-
- copy(UFVariant) - Method in interface nxopen.uf.UFEval
-
- copy(double[]) - Method in interface nxopen.uf.UFMtx2
-
- copy(double[]) - Method in interface nxopen.uf.UFMtx3
-
- copy(double[]) - Method in interface nxopen.uf.UFMtx4
-
- copy(double[]) - Method in interface nxopen.uf.UFVec2
-
- copy(double[]) - Method in interface nxopen.uf.UFVec3
-
- copy(double[]) - Method in interface nxopen.uf.UFVec4
-
- COPY_AND_PROJECT - Static variable in class nxopen.cae.NodeProjectBuilder.NodeProjectTypes
-
copy and project
- COPY_ANNOTATION - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyAnnotOption
-
copy annotation
- COPY_ASSEMBLY_ONLY - Static variable in class nxopen.assemblies.MakeUniquePartBuilder.Option
-
- COPY_BLANK - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types
-
the type of copy blank
- COPY_CURVE - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Copy of the existing curve
- COPY_CURVE - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
- COPY_DISPLAY_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
-
- COPY_EXP_DEEPLY - Static variable in class nxopen.uf.UFPart.ExportExpMode
-
- COPY_EXP_SHALLOWLY - Static variable in class nxopen.uf.UFPart.ExportExpMode
-
- COPY_INSTANCE - Static variable in class nxopen.tooling.MoldFillingBuilder.MoveOption
-
Copying instance and Modifying
- COPY_ORIGINAL - Static variable in class nxopen.features.MoveObjectBuilder.MoveObjectResultOptions
-
copy objects
- COPY_ORIGINAL - Static variable in class nxopen.routing.TransformPathBuilder.TransformOption
-
Copy the selected entities.
- COPY_ORIGINAL_CURVE - Static variable in class nxopen.features.CopyPasteBuilder.ParentTransferOption
-
Prompt for New
- COPY_PART - Static variable in class nxopen.tooling.MoldFillingBuilder.MoveOption
-
Copying new part and Modifying
- COPY_PART_FAMILY_PART - Static variable in class nxopen.tooling.SmartScrewUpdateBuilder.Types
-
- COPY_PATH - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Copy Path command.
- COPY_PATH - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Copy Path command.
- COPY_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- COPY_REFLECT - Static variable in class nxopen.cae.NodeReflectBuilder.CopyType
-
copy Reflect
- COPY_ROTATE - Static variable in class nxopen.cae.ElementRotateBuilder.CopyType
-
first copy elements then rotate the copies
- COPY_ROTATE - Static variable in class nxopen.cae.NodeRotateBuilder.CopyType
-
copy rotate
- COPY_SOURCE_FEATURES_AND_REPARENT - Static variable in class nxopen.features.shipdesign.CopyPasteNewBuilder.CopyApproach
-
The approach by copy source features and reparenting.
- COPY_SOURCE_FEATURES_AND_REPARENT - Static variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.MirrorApproach
-
The approach by copy source features and reparenting.
- COPY_TRANSLATE - Static variable in class nxopen.cae.ElementTranslateBuilder.CopyType
-
first copy elements then translate the copies
- COPY_TRANSLATE - Static variable in class nxopen.cae.NodeTranslateBuilder.CopyType
-
copy translate
- copyAllSheetsToggle() - Method in interface nxopen.tooling.MWCopySheetsBuilder
-
Returns the indicator for copying all the parting and/or patched sheets in the parting part
License requirements: None.
- copyAndMirror() - Method in interface nxopen.die.FillBuilder
-
Returns the copy and mirror setting of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- copyApproachOption() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Returns an option to determine the approach to copy the ship standard parts between planes.
- copyAsGeneralGeometrySection(BeamSection) - Method in interface nxopen.cae.BeamSectionCollection
-
Copies a section to a new general geometry section
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- copyAsTableToPart(BasePart) - Method in interface nxopen.fields.Field
-
- copyAttribute() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
The action to copy selected attributes
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- copyAttributeOnObjectCopy() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the flag specifying whether the attribute should be copied when the object is copied.
- copyAttributes(InspectionPolarGridBuilder) - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Copy point grid parameters
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- copyAttributes(InspectionUVGridBuilder) - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Copy point grid parameters
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- copyAttributesFromObject(NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Copy the attributes that are on the object to the selection.
- copyAttributesFromObjectForPaint(NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Copies the attributes that are on the object to the selection for paint.
- copyAttributesToObject(NXObject) - Method in interface nxopen.routing.AttributeHolder
-
Copies the Template Attributes of this object to a Routing Object
License requirements: routing_base ("Routing Basic")
.
- copyAttributesToObjects(boolean, FeatureBuilder) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
-
Copies attributes from proxy to feature objects
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- copyAttributesToPart(NXObject[]) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
-
- copyAttributesToPart(boolean, FeatureBuilder) - Method in interface nxopen.features.shipdesign.ShipAttributeHolder
-
Copies the attributes from proxy to part
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- CopyCageBuilder - Interface in nxopen.features.subdivision
-
- CopyCageData - Interface in nxopen.features.subdivision
-
- copyCallback(UserDefinedFeatureCopyEvent) - Method in interface nxopen.features.UserDefinedFeatureClass.CopyCallback
-
Prototype for copy callbacks
License requirements: None.
- copyChamferLabels() - Method in interface nxopen.features.PatternFaceFeatureBuilder
-
Returns the chamfer label options .
- copyChoices() - Method in interface nxopen.assemblies.MakeUniquePartBuilder
-
Returns the copy choices returned.
- copyCollector() - Method in interface nxopen.ScCollector
-
Copy collector object
License requirements: None.
- copyComponentAs(Tag, String, String, String, String, double[][]) - Method in interface nxopen.uf.UFWave
-
- CopyComponentAsData() - Constructor for class nxopen.uf.UFWave.CopyComponentAsData
-
- copyComponents(Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Given an array of components, creates copies of the components such that each copy is created
under the parent assembly of the original component.
- copyConnectedParts() - Method in interface nxopen.routing.TransformPathBuilder
-
Returns the method indicates whether connected parts get copied or not.
- copyConnectorParameters(NXObject, NXObject) - Method in interface nxopen.motion.MotionMethods
-
- copyConstraintPattern() - Method in interface nxopen.assemblies.ComponentPatternBuilder
-
Returns the copy constraint option.
- copyCornerFlag() - Method in interface nxopen.routing.OffsetPath
-
Returns the copy corner flag for an offset object.
- CopyCutBuilder - Interface in nxopen.gateway
-
- CopyCutBuilder.Status - Class in nxopen.gateway
-
Status of Copy or Cut Operation
- copyDataset(Tag, String, int) - Method in interface nxopen.uf.UFClear
-
- CopyDesignElementBuilder - Interface in nxopen.assemblies
-
Represents a builder class that performs copying design element operation in 4GD.
- copyDisplayInstanceObjects(Annotation[], View) - Method in interface nxopen.annotations.PmiManager
-
Creates copies of input PMI Display Instance objects in the part.
- copyDocumentStructure() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the copy document structure flag to decide whether to copy document structure
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- copyDofset(String, CaeDOFSet) - Method in interface nxopen.cae.CaeDOFSetCollection
-
Copy a DOFSet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- copyDrapingResults(LaminateDrapingOrientation) - Method in interface nxopen.cae.LaminatePly
-
- copyDrapingResultsInstance(LaminateIDrapingOrientation) - Method in interface nxopen.cae.LaminatePly
-
Copy draping results.
- copyElectrode(ElectrodeCopyBuilder.Copy, NXObject, NXObject, NXObject) - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Copy an electrode blank from one face to another face.
- copyEventTrigger() - Method in interface nxopen.mechatronics.ObjectSourceBuilder
-
Returns the event option.
- copyExplosion(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- CopyFace - Interface in nxopen.features
-
Represents a copy face feature
To create or edit an instance of this class, use
CopyFaceBuilder
Created in NX6.0.0
- CopyFaceBuilder - Interface in nxopen.features
-
Represents a builder for a copy face feature.
- copyFile(String, String) - Method in interface nxopen.RemoteUtilities
-
Copies a file.
- copyFrame() - Method in interface nxopen.routing.FormboardFrame
-
Makes copy of the frame, and moves it to the work layer
License requirements: routing_harness ("Routing Harness")
.
- copyFrom() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
Returns the plane where the source objects to be copied from.
- copyFromComponent() - Method in interface nxopen.cam.CAMSetup
-
Copy From Component.
- copyFromWeldCharacteristics(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Copies the weld characteristics from the specific standard part item builder.
- copyGroup(String, CaeGroup) - Method in interface nxopen.cae.CaeGroupCollection
-
Copies the input group, which must come from the same part as the collection.
- copyImage(ReportImage) - Method in interface nxopen.report.ImagesGroupItem
-
- copyInstance() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Returns the setting indicates the copy is a new part or an instance.
- copyKinematicModel() - Method in interface nxopen.sim.KinematicConfigurator
-
Copy a kinematic model.
- copyLaminatePropertyTableAs2d3d(Laminate) - Method in interface nxopen.cae.PhysicalPropertyTableCollection
-
- copyLibMatlToPart(NXObject) - Method in interface nxopen.PhysicalMaterial
-
Copies a library material to a part.
- copyLibMatlToPart(NXObject, boolean) - Method in interface nxopen.PhysicalMaterial
-
Copies a library material to a part.
- copyLimits(DieLimitsBuilder) - Method in interface nxopen.weld.WeldJointBuilder
-
Copy input limits to builder limits
License requirements: None.
- copyLwaArchiveMaterialToWorkPart(String) - Method in interface nxopen.uf.UFDisp
-
- copyMaterial(Tag) - Method in interface nxopen.uf.UFDisp
-
- CopyMaterialData() - Constructor for class nxopen.uf.UFDisp.CopyMaterialData
-
- copyMaterialFromLibrary(String, String) - Method in interface nxopen.PhysicalMaterialCollection
-
Creates an editable material (copy) in the part from a library material definition.
- copyMaterialFromLibrary(String, String, boolean) - Method in interface nxopen.PhysicalMaterialCollection
-
Creates an editable material (copy) in the part from a library material definition.
- copyMaterialItemRevision(String, String) - Method in interface nxopen.PhysicalMaterialCollection
-
- copyModelingObjectPropertyTable(ModelingObjectPropertyTable) - Method in interface nxopen.cae.ModelingObjectPropertyTableCollection
-
- copyNchars(String, int, int) - Method in interface nxopen.uf.UFText
-
- CopyNmOpt() - Constructor for class nxopen.uf.UFClone.CopyNmOpt
-
- CopyNmOpt(String, boolean) - Constructor for class nxopen.uf.UFClone.CopyNmOpt
-
- copyNode(Node) - Method in interface nxopen.blockstyler.Tree
-
Copies the existing
Node
.
- copyNode(int, NavigatorNode[]) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Copy navigator node.
- copyNonActiveAttributesFromObject(NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Copy the non active attributes that are on the object to the selection.
- copyNonmasterOpts - Variable in class nxopen.uf.UFClone.GenLogOpts
-
- copyNXBody(Body) - Method in interface nxopen.features.CustomFeatureCreateFeatureGeometryEvent
-
Creates a Parasolid copy of an NX Body
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CopyNXBodyData() - Constructor for class nxopen.features.CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData
-
- CopyObjectData() - Constructor for class nxopen.Sketch.CopyObjectData
-
- CopyObjectData(NXObject, NXObject) - Constructor for class nxopen.Sketch.CopyObjectData
-
Constructor for the CopyObjectData object.
- copyObjects(AMEBaseNode[]) - Method in interface nxopen.ame.AMEManager
-
Copies objects on the clipboard
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- copyObjects(Pmi[]) - Method in interface nxopen.annotations.PmiManager
-
Creates copies of input PMI objects in the part.
- copyObjects(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.CAMSetup
-
Copy objects
License requirements: cam_base ("CAM BASE")
.
- copyObjects(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.InspectionSetup
-
Copy objects
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- copyObjects(int, NXObject[]) - Method in interface nxopen.layer.LayerManager
-
- copyObjects(NXObject[]) - Method in interface nxopen.Sketch
-
Creates copies of input objects and constraints between these objects.
- CopyObjectsBuilder - Interface in nxopen.features.shipdesign
-
- CopyObjectsBuilder.Type - Class in nxopen.features.shipdesign
-
Type of Source Objects.
- CopyObjectsBuilder.VersionID - Class in nxopen.features.shipdesign
-
add version identifiers for the different revisions of the copy objects builder.
- copyObjectsWithDimensionOutput(NXObject[]) - Method in interface nxopen.Sketch
-
Creates copies of input objects and constraints between these objects.
- CopyObjectsWithDimensionOutputData() - Constructor for class nxopen.Sketch.CopyObjectsWithDimensionOutputData
-
- copyObjectsWithReference(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.CAMSetup
-
Copy objects with reference
License requirements: cam_base ("CAM BASE")
.
- copyObjectsWithTracking(DisplayableObject[]) - Method in interface nxopen.Sketch
-
Creates copies of input objects and constraints between these objects.
- copyOption() - Method in interface nxopen.cae.ElementRotateBuilder
-
Returns the copy option .
- copyOption() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the copy option .
- copyOption() - Method in interface nxopen.cae.NodeProjectBuilder
-
Returns the copy option
License requirements: None.
- copyOption() - Method in interface nxopen.cae.NodeReflectBuilder
-
Returns the copy option
License requirements: None.
- copyOption() - Method in interface nxopen.cae.NodeRotateBuilder
-
Returns the copy option
License requirements: None.
- copyOption() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the copy option
License requirements: None.
- copyOriginal() - Method in interface nxopen.features.ExtendSheetBuilder
-
Returns the copy original option determines if the original body is modified or a copy of the original is made
License requirements: None.
- copyOriginalOption() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the copy original logical determines if the original body is modified or if a copy of the original is modified.
- copyOverstock() - Method in interface nxopen.routing.RouteManager
-
Copy the overstock from subassembly to parent assembly.
- copyParameters(NXObject, NXObject) - Method in interface nxopen.motion.MotionMethods
-
Copy parameters from source to destination.
- copyParameters(TirePropertyBasic) - Method in interface nxopen.motion.TirePropertyBasic
-
- copyParameters(TirePropertyCd) - Method in interface nxopen.motion.TirePropertyCd
-
- copyParameters(TirePropertyFt) - Method in interface nxopen.motion.TirePropertyFt
-
- copyParameters(TirePropertyMotorcycle) - Method in interface nxopen.motion.TirePropertyMotorcycle
-
- copyParameters(TirePropertyNonInertial) - Method in interface nxopen.motion.TirePropertyNonInertial
-
- copyParameters(TirePropertyTno) - Method in interface nxopen.motion.TirePropertyTno
-
- CopyPasteBuilder - Interface in nxopen.features
-
- CopyPasteBuilder.BuilderVersion - Class in nxopen.features
-
Types of version number
- CopyPasteBuilder.ExpressionTransferOption - Class in nxopen.features
-
Types of expression transfer mode
- CopyPasteBuilder.ParentSelectOption - Class in nxopen.features
-
Types of parent select option; Specifying smart object or selecting input for original parent
- CopyPasteBuilder.ParentTransferOption - Class in nxopen.features
-
Types of parent transfer mode
- copyPasteFeatures(Tag[], int, Tag[], Tag[], int, int, int) - Method in interface nxopen.uf.UFModeling
-
- CopyPasteNewBuilder - Interface in nxopen.features.shipdesign
-
- CopyPasteNewBuilder.CopyApproach - Class in nxopen.features.shipdesign
-
Represents the approach of copying ship standard parts.
- CopyPasteNewBuilder.VersionID - Class in nxopen.features.shipdesign
-
add version identifiers for the different revisions of the copy paste new feature.
- copyPhysicalPropertyTable(PhysicalPropertyTable) - Method in interface nxopen.cae.PhysicalPropertyTableCollection
-
Copies a
PhysicalPropertyTable
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX5.0.0
- copyPlane() - Method in interface nxopen.Plane
-
Returns a new
Plane
object which is based on this plane's parameters.
- copyProperties(BasePropertyTable) - Method in interface nxopen.BasePropertyTable
-
Copies the values from the input table into this table, the table descriptor neutral names must match
License requirements: None.
- copyProperty(String, BasePropertyTable) - Method in interface nxopen.BasePropertyTable
-
Copy the value of one property from the source table into this table
License requirements: None.
- copyProps(UFWeight.Properties) - Method in interface nxopen.uf.UFWeight
-
- copyRecords(String[], int[], String) - Method in interface nxopen.cae.AfuManager
-
Copy multiple AFU Data Records to an AFU file
License requirements: None.
- copyrecords(String) - Method in interface nxopen.cae.PostGraph
-
Copy the graph's records to AFU file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- copyRelief() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the relief used to copy.
- copyReplacementFeature() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Returns the indication on whether to copy the replacement feature.
- copyResolveGeometry() - Method in interface nxopen.features.CopyPasteBuilder
-
Returns the copy resolving geometry toggle
License requirements: None.
- copySchematicObjects(SheetElement[]) - Method in interface nxopen.ame.DiagramManager
-
Copy schematic object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- copySearchResultsToObject(NXObject, NXObject) - Method in interface nxopen.routing.BulkReplacementBuilder
-
The method that copies the search results from one object to another
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- copySection(Curve, boolean) - Method in interface nxopen.die.AddendumSectionBuilder
-
Copies addendum section in order to be pasted at another location.
- copySection() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
Returns the flag is used to define if linear tolerance on UI would be used when matching geometry.
- copySection() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Returns the flag is used to define if linear tolerance on UI would be used when matching geometry.
- copySections(DynamicSection[], boolean) - Method in interface nxopen.display.DynamicSectionCollection
-
Copies the specified dynamic sections in the part.
- copySelectInsert() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the insert to be copied.
- copySelectInsert() - Method in interface nxopen.tooling.InsertEditToolsBuilder
-
Returns the copy select insert
License requirements: None.
- CopySolidBuilder - Interface in nxopen.tooling
-
- copySoPlane() - Method in interface nxopen.Plane
-
- copySystemObject(SystemObject[]) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Copies the system engeering objects to the clipboard.
- copyTargets() - Method in interface nxopen.features.BooleanBuilder
-
Returns the copy targets flag
License requirements: None.
- copyThreads() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the copy threads option
License requirements: None.
- copyThreads() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the copy threads option
License requirements: None.
- copyThreads() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the copy threads option
License requirements: None.
- copyThreads() - Method in interface nxopen.features.PatternGeometryBuilder
-
Returns the copy threads option.
- copyThreads() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
Returns the copy threads
License requirements: None.
- copyThreads() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the copy threads option
License requirements: None.
- copyTo() - Method in interface nxopen.features.shipdesign.CopyObjectsBuilder
-
Returns the target objects where the source objects to be copied to.
- copyToClipboard() - Method in interface nxopen.display.Camera
-
Copies the parameters of a camera to the operating system clipboard
License requirements: None.
- copyTools() - Method in interface nxopen.features.BooleanBuilder
-
Returns the copy tools flag
License requirements: None.
- copyToOverride() - Method in interface nxopen.positioning.ComponentConstraint
-
Given an inherited
ComponentConstraint
created because of Positioning Overrides, create a new constraint copied
from it in the same part.
- copyToPart(BasePart) - Method in interface nxopen.fields.Field
-
- copyToSolution(SimSolution) - Method in interface nxopen.cae.ResultProbe
-
Copy the result probe to target solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- copyToWeldCharacteristics(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Copies the weld characteristics to the specific standard part item builder.
- copyUserItem(IUserItem) - Method in interface nxopen.report.Report
-
Copy an user item to the
Report
.
- copyView(Tag) - Method in interface nxopen.uf.UFDraw
-
- copyView(Tag, String) - Method in interface nxopen.uf.UFView
-
- CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeArcBuilder.CenterReference
-
CSYS
- CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeArcBuilder.EndReference
-
CSYS
- CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeArcBuilder.MidReference
-
CSYS
- CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeArcBuilder.StartReference
-
CSYS
- CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeLineBuilder.EndReference
-
CSYS
- CORDINATES_SYSTEM - Static variable in class nxopen.features.AssociativeLineBuilder.StartReference
-
CSYS
- CORE - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType
-
From core region
- CORE_DIAMETER - Static variable in class nxopen.ame.OpticalAnnotationSettingsBuilder.AnnotationAttrType
-
- CORE_ONLY - Static variable in class nxopen.tooling.WorkpieceBuilder.WorkPieceType
-
The method adds the standards of cavity
- CORE_REGION - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.AssignToRegion
-
assign selected region faces to the Core region
- coreDirection() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the core direction determines the direction of Lower Binder
License requirements: ug_die_design ("Die Design")
.
- coreDrawDieOption() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the option to indicate whether to create core draw die.
- coreDrawPunchOption() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the option to indicate whether to create core draw punch.
- coreNode() - Method in interface nxopen.cae.SpiderElementBuilder
-
Returns a core node
License requirements: None.
- coreOrientation() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the plane of the core for deriving the rectangle and the start of the core.
- coreOrientation() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the core orientation of the handling core.
- corePunch() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the core punch switch of the draw die punch casting, if true the punch will be cored, if false the punch will not be cored.
- CORK_FELT - Static variable in class nxopen.annotations.AreaFillMaterial
-
Cork felt
- CORK_FELT - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
-
- CORKFELTFIBER - Static variable in class nxopen.uf.UFDrf.ValidMaterial
-
- CORNER - Static variable in class nxopen.cam.NcmSubopBuilder.DefaultRegionStartTypes
-
start_at_corners
- CORNER - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.TrimmingMarkStyleType
-
- CORNER - Static variable in class nxopen.diagramming.TrimmingMarkStyleType
-
- CORNER - Static variable in class nxopen.drawings.StandardViewsBuilder.Placement
-
- CORNER - Static variable in class nxopen.drawings.TrimmingMarkStyleType
-
- CORNER - Static variable in class nxopen.features.ExtensionBuilder.Types
-
- CORNER - Static variable in class nxopen.features.shipdesign.CornerCutBuilder.CutOption
-
Create corner cut on selected corner point.
- CORNER - Static variable in class nxopen.features.shipdesign.WeldCut2Builder.CreationMethod
-
- CORNER - Static variable in class nxopen.features.shipdesign.WeldCutBuilder.CreationMethod
-
- Corner - Interface in nxopen.routing
-
The Routing Corner is the abstract parent class of all other corner objects.
- corner - Variable in class nxopen.routing.CornerCollection.RcpCornerInfoData
-
Corner
associated
with this RCP
- corner - Variable in class nxopen.uf.UFCutter.HolderSection
-
- corner - Variable in class nxopen.uf.UFFltr.AskBoxOfAssyData
-
- corner - Variable in class nxopen.uf.UFFltr.AskBoxZoneData
-
- corner - Variable in class nxopen.uf.UFRoute.CreateBendByRadiusData
-
- corner - Variable in class nxopen.uf.UFRoute.CreateBendByRatioData
-
- corner - Variable in class nxopen.uf.UFRoute.CreateBendByTableData
-
- corner - Variable in class nxopen.uf.UFRoute.IsRcpBendSegRcpData
-
- CORNER - Static variable in class nxopen.weld.FilletBuilder.EnumWeldingType
-
- CORNER - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes
-
Corner joint.
- Corner.Type - Class in nxopen.routing
-
Various Corner subtypes.
- corner1() - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
Returns the main corner 1
License requirements: None.
- corner1() - Method in interface nxopen.weld.WeldFillBuilder
-
- CORNER1U - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Corner 1 U direction
- CORNER1U - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
-
Corner 1 U direction
- CORNER1V - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Corner 1 V direction
- CORNER1V - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
-
Corner 1 V direction
- corner2() - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
Returns the main corner 2
License requirements: None.
- corner2() - Method in interface nxopen.weld.WeldFillBuilder
-
- CORNER2U - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Corner 2 U direction
- CORNER2U - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
-
Corner 2 U direction
- CORNER2V - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Corner 2 V direction
- CORNER2V - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
-
Corner 2 V direction
- CORNER3U - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Corner 3 U direction
- CORNER3U - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
-
Corner 3 U direction
- CORNER3V - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Corner 3 V direction
- CORNER3V - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
-
Corner 3 V direction
- CORNER4U - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Corner 4 U direction
- CORNER4U - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
-
Corner 4 U direction
- CORNER4V - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirection
-
Corner 4 V direction
- CORNER4V - Static variable in class nxopen.cam.DmSurfBuilder.CutDirection
-
Corner 4 V direction
- CORNER_AFTER_WALL - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
-
Groove Corner Control cut sequence is Corner After Wall.
- CORNER_POINT - Static variable in class nxopen.features.sheetmetal.ClosedCornerBuilder.OriginTypes
-
The relief origin will be at the corner point.
- CORNER_POINT - Static variable in class nxopen.features.sheetmetal.MiterOptions.CornerTreatmentOriginTypeOptions
-
The cutout origin will be at the corner point.
- CORNER_POINT - Static variable in class nxopen.features.sheetmetal.ThreeBendCornerBuilder.OriginTypes
-
The relief origin will be at the corner point.
- CORNER_WITH_WALL - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
-
Groove Corner Control cut sequence is Corner With Wall.
- CornerBuilder - Interface in nxopen.mechanicalrouting
-
Builder class for Corner Block .
- CornerBuilder.Type - Class in nxopen.mechanicalrouting
-
Corner Types available.
- cornerBumperAngle() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the angle that is used to determine the corner of the bumper
License requirements: None.
- cornerBumperAngleMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the marginal angle that is used to determine the corner of the bumper
License requirements: None.
- cornerBumperAngleSecondMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the second marginal angle that is used to determine the corner of the bumper
License requirements: None.
- cornerClearance() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the corner clearance defines the radius that the tool turns around at the concave wall corners.
- CornerCollection - Interface in nxopen.routing
-
Represents a collection of
Corner
objects.
- CornerCollection.RcpCornerInfoData - Class in nxopen.routing
-
- cornerColorFontWidth() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the color, font, and width of the corner joint curves.
- cornerControl() - Method in interface nxopen.cam.HoleMachiningCutParameters
-
Returns the corner control
License requirements: None.
- cornerControl() - Method in interface nxopen.cam.MillCutParameters
-
Returns the corner control
License requirements: None.
- CornerControlBuilder - Interface in nxopen.cam
-
Represents a FinishPasses Builder .
- CornerControlBuilder.AdjustFeedRateOptions - Class in nxopen.cam
-
Available Adjust Feed Rate options
- CornerControlBuilder.CornerControlMethods - Class in nxopen.cam
-
Available methods for Corner Control
- CornerControlBuilder.SlowdownDistanceOptions - Class in nxopen.cam
-
Available Slowdown Distance options
- CornerControlBuilder.SmoothCornersAtOptions - Class in nxopen.cam
-
Available options where Corner Smoothing should be applied
- CornerControlBuilder.SmoothingOptions - Class in nxopen.cam
-
Available options for corner smoothing
- cornerControlMethod() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the Corner Control Method
License requirements: None.
- cornerControlNormal() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the corner control builder for normal corners
License requirements: None.
- cornerControlShallow() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the corner control builder for shallow corners
License requirements: None.
- CornerCut - Interface in nxopen.features.shipdesign
-
Represents a corner cut feature
To create or edit an instance of this class, use
CornerCutBuilder
Created in NX8.5.0
- CornerCutBuilder - Interface in nxopen.features.shipdesign
-
Builder used to create or edit a
CornerCut
feature.
- CornerCutBuilder.CutOption - Class in nxopen.features.shipdesign
-
Represents the corner cut option.
- CornerCutListItemBuilder - Interface in nxopen.features.shipdesign
-
- CornerCutListItemBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- cornerCutType() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the value that specifies if and where to create corner cuts
License requirements: None.
- CornerData() - Constructor for class nxopen.cae.MappedMeshBuilder.CornerData
-
- cornerDesign() - Method in interface nxopen.tooling.ToolingManager
-
Returns the CornerDesign instance belonging to this part .
- CornerDesignBuilder - Interface in nxopen.tooling
-
- CornerDesignBuilder.CornerTypeOpt - Class in nxopen.tooling
-
the corner types
- CornerDesignBuilder.SelectFromOpt - Class in nxopen.tooling
-
the object selection options.
- CornerDesignBuilder.Types - Class in nxopen.tooling
-
The corner design type.
- CornerDesignCollection - Interface in nxopen.tooling
-
- cornerFaces() - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilder
-
Returns the corner faces
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- cornerFeedType() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
Returns the corner feed rate type
License requirements: None.
- cornerFillet() - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Returns the corners to blend.
- cornerFindingOptions() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Corner Finding Options
License requirements: None.
- CORNERING - Static variable in class nxopen.motion.TirePropertyBasicParameters.CorneringType
-
- corneringStiffness() - Method in interface nxopen.motion.TirePropertyBasicParameters
-
Returns the cornering stiffness constant
This parameter is only used in the
TirePropertyBasic
.
- corneringStiffness() - Method in interface nxopen.motion.TirePropertyNonInertialBuilder
-
Returns the cornering stiffness constant
License requirements: mechanisms ("MECHANISMS")
.
- corneringTableFile() - Method in interface nxopen.motion.TirePropertyBasicParameters
-
Returns the cornering table file.
- corneringTableProfile() - Method in interface nxopen.motion.TirePropertyBasicParameters
-
Returns the cornering table profile.
- cornerList() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Returns the corner list
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- cornerList() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
Returns the list of corner points.
- cornerLoops() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the corner loops value
License requirements: None.
- cornerMaximumAngleBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the corner_maximum_angle builder
License requirements: cam_base ("CAM BASE")
.
- cornerMaximumAngleBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the corner_maximum_angle builder
License requirements: cam_base ("CAM BASE")
.
- cornerMethod() - Method in interface nxopen.features.DivideCurveBuilder
-
Returns the corner method
License requirements: None.
- cornerMinimumAngleBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the corner_minimum_angle builder
License requirements: cam_base ("CAM BASE")
.
- cornerMinimumAngleBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the corner_minimum_angle builder
License requirements: cam_base ("CAM BASE")
.
- cornernodegapvalues - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
Corner node gap values in units mm or in.
- cornernodethicknesses - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
Corner node thicknesses in units mm or in.
- cornerNumber() - Method in interface nxopen.features.DivideCurveBuilder
-
Returns the corner number
License requirements: None.
- cornerPoint() - Method in interface nxopen.features.DivideCurveBuilder
-
Returns the corner point
License requirements: None.
- cornerPoint() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
Returns the corner point.
- cornerPoint() - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilder
-
Returns the corner point as the cut location.
- cornerPoint() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
Returns the corner point as weld location.
- CornerPointsData() - Constructor for class nxopen.DatumPlane.CornerPointsData
-
- CornerPointsData() - Constructor for class nxopen.display.BoundedGridBuilder.CornerPointsData
-
- CornerPointsData() - Constructor for class nxopen.display.ImageBaseBuilder.CornerPointsData
-
- cornerRad - Variable in class nxopen.uf.UFModl.AskUSlotParmsData
-
- cornerRad - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParms1Data
-
- cornerRad - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParmsData
-
- cornerRad - Variable in class nxopen.uf.UFModlFeatures.AskRectPocketParmsData
-
- cornerRad - Variable in class nxopen.uf.UFModlFeatures.AskUGrooveParmsData
-
- cornerRadius - Variable in class nxopen.cam.HolderSectionBuilder.AllParametersData
-
the corner radius
- cornerRadius - Variable in class nxopen.cam.HolderSectionBuilder.Data
-
the corner radius
- cornerRadius() - Method in interface nxopen.cam.LaserCutoutDefinition
-
Returns the Corner Radius
License requirements: None.
- cornerRadius - Variable in class nxopen.cam.StepParamsBuilder.Data
-
the corner radius
- cornerRadius() - Method in interface nxopen.cam.WireGuide
-
Returns the corner radius
License requirements: None.
- cornerRadius() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the corner radius
License requirements: None.
- cornerRadius() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the Radius to be applied for rounding the sharp section corners
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- cornerRadius() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the corner radius
Only use this option to edit gussets created prior to NX10.
- cornerRadius() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the corner radius expression
License requirements: None.
- cornerRadius() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the corner radius expression
License requirements: None.
- cornerRadius() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the corner radius expression
License requirements: None.
- cornerRadiusBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the corner_radius builder
License requirements: cam_base ("CAM BASE")
.
- cornerRadiusBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the corner_radius builder
License requirements: cam_base ("CAM BASE")
.
- cornerReliefType() - Method in interface nxopen.features.sheetmetal.BendOptions
-
Returns the corner relief type.
- cornerReliefType() - Method in interface nxopen.features.sheetmetal.EditCornerBuilder
-
Returns the corner relief type
License requirements: None.
- CORNERS - Static variable in class nxopen.cae.responsesimulation.DataLocation.Element
-
- CORNERS - Static variable in class nxopen.cae.responsesimulation.ElementLocation
-
- CORNERS - Static variable in class nxopen.cam.NCAssistantBuilder.AnalysisTypes
-
Analysis Type: Corners
- CORNERS - Static variable in class nxopen.drawings.MultipleViewPlacementBuilder.Option
-
By Corners
- corners() - Method in interface nxopen.routing.RouteManager
-
Corner collection .
- CORNERS_FIRST - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
-
Groove Corner Control cut sequence is Corners First.
- CORNERS_FIRST_AND_LAST - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
-
Groove Corner Control cut sequence is Corners First and Last.
- CORNERS_LAST - Static variable in class nxopen.cam.TurnGrooveCornerControl.CutSequenceTypes
-
Groove Corner Control cut sequence is Corners Last.
- CORNERS_SUPPORTS_ONLY - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.DeckSupportTypeAPI
-
- cornerSettings() - Method in interface nxopen.mechanicalrouting.AssignCornerBuilder
-
Returns the corner block
License requirements: routing_base ("Routing Basic")
.
- cornerSettings() - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
Returns the builder to assign corners to the routing path.
- cornerTargetFace() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
Returns the corner target face.
- CornerTreatmentBuilder - Interface in nxopen.features.sheetmetal
-
The CornerTreatmentBuilder class is used to manage a builder object for
a corner treatment in the flat solid and flat pattern dialogs.
- CornerTreatmentBuilder.CornerTreatmentType - Class in nxopen.features.sheetmetal
-
Corner Treatment Type
- cornerTreatmentOffset() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the offset used for circular, u and v cutout corner treatments.
- cornerTreatmentOriginType() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the origin used for circular, u and v cutout corner treatments.
- cornerType() - Method in interface nxopen.cam.TurnGrooveCornerControl
-
Returns the Groove Corner Control corner type
License requirements: None.
- cornerType() - Method in interface nxopen.mechanicalrouting.CornerBuilder
-
Returns the corner types
License requirements: routing_base ("Routing Basic")
.
- cornerType - Variable in class nxopen.routing.CornerCollection.RcpCornerInfoData
-
Type of corner.
- cornerType() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the corner type
License requirements: None.
- cornerType - Variable in class nxopen.uf.UFModl.SmcornerData
-
- CornerTypeBuilder - Interface in nxopen.routing
-
Contains setting for corner creation.
- CornerTypeBuilder.BendMethods - Class in nxopen.routing
-
Methods available for bend creation.
- CornerTypeBuilder.BendOptions - Class in nxopen.routing
-
- CornerTypeBuilder.Type - Class in nxopen.routing
-
Defines the type of bend available for bend creation.Type of bend available are None,Miter
,Bend , S-bend and S-Elbow.
- cornerZoneModification() - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
Returns the corner zone modification used as determine the size of the corner zone.
- cornerZoneModification() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the corner zone modification
License requirements: None.
- CORNFLOWER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- CORRECTED - Static variable in class nxopen.die.OutputCurvesBuilder.TrimOutputCurveTypes
-
Corrected.
- CORRECTED - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.OutputMethodName
-
Corrected curve only
- correctionMode() - Method in interface nxopen.cae.FemSignalProcessingSignalAttributes
-
Returns the correction mode in which the data is encoded
License requirements: None.
- correctionMode() - Method in interface nxopen.cae.SimLoadRecipeFunctionAttributes
-
Returns the default correction mode of the functions in the file
License requirements: None.
- correctorIter() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the corrector iterations.
- CorrelAlignmentBuilder - Interface in nxopen.cae
-
- CorrelAlignmentBuilder.ReferencePt - Class in nxopen.cae
-
Specifies the data for the selected reference points
- CorrelAlignmentBuilder.ScalingChoice - Class in nxopen.cae
-
the way the scaling factor is computed
- CorrelApplyAlignmentFromBuilder - Interface in nxopen.cae
-
- correlationType() - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder
-
Returns the correlation type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- correlationValue() - Method in interface nxopen.cae.responsesimulation.CSDExcitationBuilder
-
Returns the correlation type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- CorrelBaseBuilder - Interface in nxopen.cae
-
Represents the abstract builder class for all objects defined in correl meta solution
This is an abstract class, and cannot be created.
- CorrelFineTuneAlignmentBuilder - Interface in nxopen.cae
-
- CorrelFineTuneAlignmentBuilder.AngleVector - Class in nxopen.cae
-
the angle vector enumeration for the alignment nudge
- CorrelFineTuneAlignmentBuilder.DistanceVector - Class in nxopen.cae
-
the distance vector enumeration for the alignment nudge
- CorrelManager - Interface in nxopen.cae
-
Represents the correl manager that contains all correl and pre-test objects
To obtain an instance of this class, refer to
SimSimulation
Created in NX6.0.0
- correlManager() - Method in interface nxopen.cae.SimSimulation
-
Returns the correl manager belonging to this sim part .
- correlMethod() - Method in interface nxopen.cae.ModelUpdateCorrelMethodBuilder
-
Returns the correlation method
License requirements: None.
- CorrelModePairingBuilder - Interface in nxopen.cae
-
- CorrelModePairingBuilder.Auto - Class in nxopen.cae
-
The automatic pairing rule type
- CorrelShapemetrictype - Class in nxopen.cae
-
shape Metric Code
- CorrelSolution - Interface in nxopen.cae
-
Represents a
CorrelSolution
, which is a meta-solution used to compare results from two structural dynamics solutions
To create or edit an instance of this class, use
CorrelSolutionBuilder
Created in NX6.0.0
- CorrelSolution.CalculateComacsData - Class in nxopen.cae
-
- CorrelSolution.ComputeMacsData - Class in nxopen.cae
-
- CorrelSolutionBuilder - Interface in nxopen.cae
-
- CorrelSolutionBuilder.EnumDampingFrftype - Class in nxopen.cae
-
The damping type enum
- CorrelSolutionCollection - Interface in nxopen.cae
-
Represents a collection of correl meta solution
To obtain an instance of this class, refer to
CorrelManager
Created in NX6.0.0
- cosimSampleTimeExpression() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the sampling time for co-simulation expression
License requirements: None.
- cosimSimModel() - Method in interface nxopen.motion.RecurdynSolverProperty
-
Returns the simulink model for co-simulation
License requirements: None.
- coSimulation() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the co-simulation option
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- CostTableDataProvider - Interface in nxopen.tooling
-
Provides basic data for cost feature table data.
- COULD_NOT_EXECUTE - Static variable in class nxopen.uf.UFConstants
-
- COULD_NOT_OPEN - Static variable in class nxopen.assemblies.ComponentAssembly.OpenComponentStatus
-
The component could not be opened
- couldNotClose() - Method in interface nxopen.PartReopenStatus
-
Returns whether or not the part was closed.
- couldNotResetWorkPart() - Method in interface nxopen.PartReopenReport
-
Returns whether or not the work part failed to reset during the reopen operation.
- coulombFrictionOption() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the coulomb friction option
License requirements: None.
- coulombFrictionOption() - Method in interface nxopen.motion.BodyContactLms
-
Returns the coulomb friction option
License requirements: None.
- coulombFrictionOption() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the coulomb friction option
License requirements: None.
- coulombFrictionOption() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the coulomb friction option
License requirements: None.
- count() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Returns the number of design elements to be created.
- COUNT - Static variable in class nxopen.cae.optimization.DAODesignVariableBuilder.Variable
-
Variable type count
- COUNT - Static variable in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
-
Determines the number of values of the selection area
- COUNT - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
The number of callback reasons.
- COUNT - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
The number of design rule reasons.
- count - Variable in class nxopen.uf.UFAssem.AskHiddenCompsData
-
- count - Variable in class nxopen.uf.UFAssem.AskSearchDirectoriesData
-
- count - Variable in class nxopen.uf.UFBrep.Mapping
-
- count - Variable in class nxopen.uf.UFBrep.Options
-
- count - Variable in class nxopen.uf.UFCam.OptAskClsfNamesData
-
- count - Variable in class nxopen.uf.UFCam.OptAskDocNamesData
-
- count - Variable in class nxopen.uf.UFCam.OptAskPostNamesData
-
- count - Variable in class nxopen.uf.UFCam.OptAskSubtypesData
-
- count - Variable in class nxopen.uf.UFCam.OptAskTypesData
-
- count - Variable in class nxopen.uf.UFCambnd.AskBoundariesData
-
- count - Variable in class nxopen.uf.UFCambnd.AskBoundaryItemsData
-
- count - Variable in class nxopen.uf.UFCamgeom.AskCollectorItemsData
-
- count - Variable in class nxopen.uf.UFCamgeom.AskItemsData
-
- count - Variable in class nxopen.uf.UFCurve.CreateSilhouetteData
-
- count - Variable in class nxopen.uf.UFDirpath.AskDirsData
-
- count - Variable in class nxopen.uf.UFFbmGeom.AskAccessibilityVectorsData
-
- count - Variable in class nxopen.uf.UFFbmGeom.AskAvailableCriteriaData
-
- count - Variable in class nxopen.uf.UFFbmGeom.AskFeatureEntitiesData
-
- count - Variable in class nxopen.uf.UFFbmGeom.AskFeaturesData
-
- count - Variable in class nxopen.uf.UFFbmGeom.AskListOfFeatureNamesData
-
- count - Variable in class nxopen.uf.UFFbmGeom.AskRepresentativeFeaturesData
-
- count - Variable in class nxopen.uf.UFFbmGeom.AskUsedCriteriaData
-
- count - Variable in class nxopen.uf.UFLib.AskRecordInRsetData
-
- count - Variable in class nxopen.uf.UFLib.AskRsetMapData
-
- count - Variable in class nxopen.uf.UFLib.ExecuteQueryData
-
- count - Variable in class nxopen.uf.UFMfm.AskAttributesData
-
- count - Variable in class nxopen.uf.UFMfm.AskGeometryGroupsData
-
- count - Variable in class nxopen.uf.UFMfm.AskListOfFacesData
-
- count - Variable in class nxopen.uf.UFMfm.AskMachiningFeaturesOfPartData
-
- count - Variable in class nxopen.uf.UFMfm.AskMachiningFeaturesOfTypeData
-
- count - Variable in class nxopen.uf.UFMfm.AskMachiningFeatureTypesData
-
- count - Variable in class nxopen.uf.UFMfm.AskSelectedFeaListData
-
- count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromModelingFeaturesData
-
- count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromRecognizedFeaturesData
-
- count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedArcsData
-
- count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedEdgesData
-
- count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedFacesData
-
- count - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromUserDefinedFeaturesData
-
- count - Variable in class nxopen.uf.UFModeling.AskSubdivFaceParmsData
-
- count - Variable in class nxopen.uf.UFNcgroup.AskMemberListData
-
- count - Variable in class nxopen.uf.UFParam.AskDoubleVlaData
-
- count - Variable in class nxopen.uf.UFParam.AskInheritedParamsData
-
- count - Variable in class nxopen.uf.UFParam.AskIntVlaData
-
- count - Variable in class nxopen.uf.UFParam.AskRequiredParamsData
-
- count - Variable in class nxopen.uf.UFParam.AskTagVlaData
-
- count - Variable in class nxopen.uf.UFPart.SaveAllData
-
- count - Variable in class nxopen.uf.UFPart.UpdateFamilyInstanceData
-
- count - Variable in class nxopen.uf.UFProcessAid.PopulateAttrListData
-
- count - Variable in class nxopen.uf.UFScop.AskTxIntpVectorData
-
- count - Variable in class nxopen.uf.UFSf.AskLvNxData
-
- count - Variable in class nxopen.uf.UFUgmgr.ListConfigRulesData
-
- count - Variable in class nxopen.uf.UFUgmgr.ListContextsData
-
- count - Variable in class nxopen.uf.UFUgmgr.ListFolderContentsData
-
- count - Variable in class nxopen.uf.UFUgmgr.ListIdDisplayRulesData
-
- count - Variable in class nxopen.uf.UFUgmgr.ListIdTypesData
-
- count - Variable in class nxopen.uf.UFUgmgr.ListPartsInFolderData
-
- count - Variable in class nxopen.uf.UFUi.AskSelObjectListData
-
- count - Variable in class nxopen.uf.UFUi.SelectParametersData
-
- count - Variable in class nxopen.uf.UFUi.SelectPointCollectionData
-
- count - Variable in class nxopen.uf.UFUi.SelectRoutingObjectsData
-
- count - Variable in class nxopen.uf.UFUi.SelectRpoDimensionsData
-
- count - Variable in class nxopen.uf.UFUi.SelectSketchDimensionsData
-
- count - Variable in class nxopen.uf.UFUiOnt.AskSelectedNodesData
-
- count - Variable in class nxopen.uf.UFWeld.LocateWeldsData
-
- count - Variable in class nxopen.uf.UFWeld.PopulateAttrListData
-
- COUNT_ANGLE_DISTANCE - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions
-
use Count, Angle, Distance to define a Helix
- COUNT_HELIX_PITCH_AND_SPAN - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions
-
use Count, Helix Pitch, Span to define a Helix
- COUNT_HELIX_PITCH_AND_TURNS - Static variable in class nxopen.geometricutilities.HelixPattern.SizeOptions
-
use Count, Helix Pitch, Turns to define a Helix
- countAllNodesOfValidElements() - Method in interface nxopen.uf.UFSf
-
- countAllValidElements() - Method in interface nxopen.uf.UFSf
-
- COUNTAND_PITCH - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.SpaceType
-
- COUNTAND_SPAN - Static variable in class nxopen.linedesigner.RailingFeatureBuilder.SpaceType
-
- countAttributes(Tag, int) - Method in interface nxopen.uf.UFAttr
-
- countCharacters(String) - Method in interface nxopen.uf.UFText
-
- countClearanceSets() - Method in interface nxopen.assemblies.ClearanceSetCollection
-
Determines the number of clearance analysis datasets in the specified part.
- countDatasets(Tag) - Method in interface nxopen.uf.UFClear
-
- countElements(Tag) - Method in interface nxopen.uf.UFSf
-
- countEntsInPartOcc(Tag) - Method in interface nxopen.uf.UFAssem
-
- COUNTER - Static variable in class nxopen.ame.MemorySectionType
-
- COUNTER - Static variable in class nxopen.ame.PlcDataType
-
- COUNTER_BORE_DEPTH - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- COUNTER_BORE_DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- COUNTER_BORE_HOLE - Static variable in class nxopen.uf.UFModl.HoleType
-
- COUNTER_CLOCKWISE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableDirections
-
Rotate table in counter clockwise direction
- COUNTER_CLOCKWISE - Static variable in class nxopen.cam.WedmCutParameters.CutDirectionTypes
-
counter clockwise cut direction
- COUNTER_SINK_ANGLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- COUNTER_SINK_DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- COUNTER_SUNK_HOLE - Static variable in class nxopen.uf.UFModl.HoleType
-
- COUNTERBORE - Static variable in class nxopen.features.Hole.Subtype
-
Counterbore hole
- COUNTERBORE - Static variable in class nxopen.features.HoleFeatureBuilder.HoleSubtype
-
Counterbore hole
- COUNTERBORE_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- COUNTERBORED - Static variable in class nxopen.features.HolePackageBuilder.HoleForms
-
Counterbored hole form
- COUNTERBORED - Static variable in class nxopen.geometricutilities.StartHoleData.HoleForms
-
Counterbored hole form
- COUNTERBORED_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
- counterboreDepth() - Method in interface nxopen.features.Hole
-
Returns
the counterbore depth of the hole.
- counterboreDepth() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the depth of the counterbore for a hole.
- counterboreDepth() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the counterbore depth
License requirements: None.
- counterboreDepthType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the counterboreDepth setting
License requirements: None.
- counterboreDepthValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the counterboreDepth value
License requirements: None.
- counterboredHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the counterbored holes
License requirements: None.
- counterBoreDiameter() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the counter bore diameter of the die hole.
- counterBoreDiameter() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the counter bore diameter of die holes.
- counterboreDiameter() - Method in interface nxopen.features.Hole
-
Returns
the counterbore diameter of the hole.
- counterboreDiameter() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the diameter of the counterbore for a hole.
- counterboreDiameter() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the counterbore diameter
License requirements: None.
- counterBoreDiameterTitle - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData
-
Title for counter bore diameter attribute.
- counterBoreDiameterTitle - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData
-
Title for counter bore diameter attribute.
- counterboreDiameterType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the counterboreDiameter setting
License requirements: None.
- counterboreDiameterValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the counterboreDiameter value
License requirements: None.
- CounterboreHoleData() - Constructor for class nxopen.features.Hole.CounterboreHoleData
-
- COUNTERBORING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
counterboring
- COUNTERCLOCKWISE - Static variable in class nxopen.cam.CamPathDir
-
- COUNTERCLOCKWISE - Static variable in class nxopen.cam.GuidingCurvesCutDir.Option
-
Cut direction is counterclockwise
- COUNTERSINK - Static variable in class nxopen.features.Hole.Subtype
-
Countersink hole
- COUNTERSINK - Static variable in class nxopen.features.HoleFeatureBuilder.HoleSubtype
-
Countersink hole
- COUNTERSINK - Static variable in class nxopen.features.HolePackageBuilder.HoleForms
-
Countersink hole form
- COUNTERSINK - Static variable in class nxopen.geometricutilities.StartHoleData.HoleForms
-
Countersink hole form
- COUNTERSINK_DIAMETER - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
-
Depth options: Countersink Diameter
- COUNTERSINK_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- countersinkAngle() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the countersink angle
License requirements: None.
- countersinkAngle() - Method in interface nxopen.features.Hole
-
Returns
the countersink angle of the hole.
- countersinkAngle() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the angle of the countersink for a hole.
- countersinkAngle() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the countersink angle
License requirements: None.
- countersinkAngleType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the countersinkAngle setting
License requirements: None.
- countersinkAngleValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the countersinkAngle value
License requirements: None.
- countersinkDiameter() - Method in interface nxopen.features.Hole
-
Returns
the countersink diameter of the hole.
- countersinkDiameter() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the diameter of the countersink for a hole.
- countersinkDiameter() - Method in interface nxopen.geometricutilities.StartHoleData
-
Returns the countersink diameter
License requirements: None.
- countersinkDiameterType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the countersinkDiameter setting
License requirements: None.
- countersinkDiameterValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the countersinkDiameter value
License requirements: None.
- CountersinkHoleData() - Constructor for class nxopen.features.Hole.CountersinkHoleData
-
- COUNTERSINKING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
countersinking
- counterSpindleFace() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the counter spindle face.
- COUNTERSUNK_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
- countersunkHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the countersunk holes
License requirements: None.
- countInterferences(Tag) - Method in interface nxopen.uf.UFClear
-
- countListItems(UFVariant) - Method in interface nxopen.uf.UFKf
-
- countNodes(Tag) - Method in interface nxopen.uf.UFSf
-
- countObjsInComp(Tag) - Method in interface nxopen.uf.UFAssem
-
- countOfFaces() - Method in interface nxopen.cam.Splitter
-
Returns the item count of the list
License requirements: None.
- countOfInstances() - Method in interface nxopen.geometricutilities.HelixPattern
-
Returns the count of instances for the Helix type pattern
License requirements: None.
- countOfMachiningFeatures - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedPointsData
-
- countOfMembers - Variable in class nxopen.uf.UFGroup.AskGroupData
-
- countOfTargets - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- countRefSetsIn(Tag) - Method in interface nxopen.uf.UFAssem
-
- countTextSubstring(int, int) - Method in interface nxopen.uf.UFDrf
-
- COUPLED_ACOUSTICAL_NODES - Static variable in class nxopen.cae.Result.Quantity
-
- coupledSolutionOption() - Method in interface nxopen.cae.SolidPropertyCheckBuilder
-
Returns the coupled solution output option
License requirements: nx_masterfem ("Finite Element Modeling")
.
- coupleLimit() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the coupling limit
License requirements: None.
- Coupler - Interface in nxopen.motion
-
Represents a motion coupler object
This is an abstract class, and cannot be created.
- CouplerBuilder - Interface in nxopen.motion
-
Represents a
CouplerBuilder
This is an abstract class, and cannot be created.
- CouplerCable - Interface in nxopen.motion
-
Represents a motion cable object
To create or edit an instance of this class, use
CouplerCableBuilder
Created in NX6.0.0
- CouplerCableBuilder - Interface in nxopen.motion
-
- CouplerCollection - Interface in nxopen.motion
-
Represents a collection of motion couplers
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- CouplerGear - Interface in nxopen.motion
-
Represents a motion gear object
To create or edit an instance of this class, use
CouplerGearBuilder
Created in NX6.0.0
- CouplerGearBuilder - Interface in nxopen.motion
-
- CouplerRckpn - Interface in nxopen.motion
-
Represents a motion rack and pinion object
To create or edit an instance of this class, use
CouplerRckpnBuilder
Created in NX6.0.0
- CouplerRckpnBuilder - Interface in nxopen.motion
-
- couplers() - Method in interface nxopen.motion.MotionManager
-
- Coupling - Interface in nxopen.mechatronics
-
Represents the mechatronics coupling class.
- COUPLING_CURVE - Static variable in class nxopen.motion.LinkCouplerBuilder.MethodChoices
-
Coupling Curve
- CouplingBuilder - Interface in nxopen.mechatronics
-
This is an abstract class, and cannot be created.
- coutoutType() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the coutout type
License requirements: None.
- coutoutType() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the coutout type
License requirements: None.
- coutoutType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the coutout type
License requirements: None.
- coutput() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the C output
License requirements: None.
- COVER_ARC - Static variable in class nxopen.features.SectionSurfaceBuilder.SectionMethodCircularTangentEnum
-
Deprecated.
cover arc
- COVER_ARC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.SectionMethodCircleTangentType
-
cover arc
- CoverFeature - Interface in nxopen.linedesigner
-
Represents a cover feature
To create or edit an instance of this class, use
CoverFeatureBuilder
Created in NX9.0.0
- CoverFeatureBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.CoverFeature
builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createCoverFeatureBuilder
Default values.
- coverThickness() - Method in interface nxopen.linedesigner.CoverFeatureBuilder
-
Returns the cover thickness
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- coverThickness() - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
Returns the cover thickness
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- coverThickness() - Method in interface nxopen.routing.electrical.CableStockDefinition
-
Returns the thickness of the cable's covering.
- CPARLN - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Closed Parallel Line bounded slot
- CPARLN - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Bounded Slot Tab
- CPD_FEATURE_PART - Static variable in class nxopen.pdm.FileManagement.FileType
-
- CPD_GEOMETRY_OVERRIDE - Static variable in class nxopen.pdm.FileManagement.FileType
-
- CPLUS_PLUS - Static variable in class nxopen.preferences.SessionUserInterface.JournalLanguageType
-
C++ restricts the file format to Ascii
- CPLUSPLUS - Static variable in class nxopen.report.ProgramInformation.LanguageType
-
C plus plus language
- CPT_CLINE_FBOLT - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- CPT_CLINE_FCIR - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- CPT_CLINE_PBOLT - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- CPT_CLINE_PCIR - Static variable in class nxopen.uf.UFDrf.ValidClineForm
-
- cpuTime - Variable in class nxopen.uf.UF.TimerValues
-
- CQC - Static variable in class nxopen.cae.responsesimulation.CombinationEvaluationOptions.EvaluationMethod
-
- CR - Static variable in class nxopen.annotations.RadiusSymbol
-
Specifies CR symbol
- CR - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.RadialSymbolOptions
-
CR
- CR12 - Static variable in class nxopen.tooling.QuickQuotationBuilder.InsertGroupMaterials
-
insert group material is Cr12
- CR12MO_V - Static variable in class nxopen.tooling.QuickQuotationBuilder.InsertGroupMaterials
-
insert group material is Cr12MoV
- cr2 - Variable in class nxopen.uf.UFPatt.CycleErrorsData
-
- cr3 - Variable in class nxopen.uf.UFDrf.AskTextData
-
- cr3 - Variable in class nxopen.uf.UFView.AskViewDependentStatusData
-
- crankRadius() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the crank radius to calculate controller data.
- CrashBarrier - Interface in nxopen.features.vehicledesign
-
Represents a crash barrier feature
To create or edit an instance of this class, use
CrashBarrierBuilder
Created in NX8.5.0
- CrashBarrierBuilder - Interface in nxopen.features.vehicledesign
-
Represents a
CrashBarrier
builder
to create and edit a vehicle design crash barrier.
- CrashBarrierBuilder.CrossPositionType - Class in nxopen.features.vehicledesign
-
Represents the cross position types.
- CrashBarrierBuilder.OverlapSideType - Class in nxopen.features.vehicledesign
-
Represents the overlap side types for the front and rear barriers.
- CrashBarrierBuilder.PositionObjectType - Class in nxopen.features.vehicledesign
-
Represents the position object types.
- CrashBarrierBuilder.RequirementsControlsControlType - Class in nxopen.features.vehicledesign
-
Represents the requirements control types to define the crash barrier.
- CrashBarrierBuilder.ShapeType - Class in nxopen.features.vehicledesign
-
Represents the shape types.
- CrashBarrierBuilder.SideOverlapSideType - Class in nxopen.features.vehicledesign
-
Represents the overlap side types for side barrier.
- CrashBarrierBuilder.SidePositionType - Class in nxopen.features.vehicledesign
-
Represents the position types for side barrier.
- cre2dtrimBsurf(int, int, int, int, double[], double[], double[], int, int[], int[], Tag[], double) - Method in interface nxopen.uf.UFModlGeneral
-
- Cre2dtrimBsurfData() - Constructor for class nxopen.uf.UFModlGeneral.Cre2dtrimBsurfData
-
- CRE_FEA_GRP_IN_MANU_FEA_MANG - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- create(Arrangement, String) - Method in interface nxopen.assemblies.ArrangementCollection
-
- CREATE - Static variable in class nxopen.assemblies.DesignElementBuilder.OperationType
-
Creates a design element
- create(String) - Method in interface nxopen.assemblies.ExplosionCollection
-
Creates an explosion based upon the default arrangement in the given OCC part.
- CREATE - Static variable in class nxopen.AttributePropertiesBuilder.OperationType
-
Create.
- CREATE - Static variable in class nxopen.blockstyler.BlockDialog.DialogMode
-
When the user presses Ok or Apply on the
dialog, the user's inputs are saved in dialog memory and the next time that the dialog
is shown in Create mode, the dialog is initialized using the user's previous
inputs.
- create(ElementType, String, IConnection[]) - Method in interface nxopen.cae.connections.ElementCollection
-
Creates a
Element
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX11.0.0
- create(DataSource) - Method in interface nxopen.cae.DataProcessingCollection
-
Creates a data processing object.
- CREATE - Static variable in class nxopen.cae.ElementCreateBuilder.NewMeshType
-
create new mesh
- CREATE - Static variable in class nxopen.cae.ElementExtrudeBuilder.NewMeshType
-
create new mesh
- CREATE - Static variable in class nxopen.cae.ElementProjectBuilder.NewMeshType
-
Create new mesh
- CREATE - Static variable in class nxopen.cae.ElementReflectBuilder.NewMeshType
-
create new mesh
- CREATE - Static variable in class nxopen.cae.ElementRevolveBuilder.NewMeshType
-
create new mesh
- CREATE - Static variable in class nxopen.cae.ElementRotateBuilder.NewMeshType
-
create a new mesh
- CREATE - Static variable in class nxopen.cae.ElementTranslateBuilder.NewMeshType
-
create a new mesh
- create(String, int) - Method in interface nxopen.cae.SimConditionCollection
-
- create(String) - Method in interface nxopen.cae.SimConditionCollection
-
- create(int) - Method in interface nxopen.cae.SimConditionCollection
-
- create() - Method in interface nxopen.cae.SimConditionCollection
-
- create(String, Unit) - Method in interface nxopen.cae.SimConditionParamCollection
-
- create(double, SimCondition, String) - Method in interface nxopen.cae.SimConditionTimeStepCollection
-
- create(String, String, SimLoadRecipeTypes.DataTypes) - Method in interface nxopen.cae.SimLoadRecipeCollection
-
Creates a new Load Recipe and adds it to the collection.
- create(SimLoadRecipeMapEntryTargetTypes.TargetTypes, String) - Method in interface nxopen.cae.SimLoadRecipeMapEntryCollection
-
Creates a new map entry and adds it to the collection.
- create(String, String, String) - Method in interface nxopen.cae.SimLoadRecipeSourceCollection
-
Creates and adds a new
SimLoadRecipeSource
to the Load Recipe
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX10.0.0
- CREATE - Static variable in class nxopen.cae.SpiderElementBuilder.NewMeshType
-
create new mesh
- create(double, double, double) - Method in interface nxopen.cam.FormEdgesBuilder
-
Create a new form edges item
License requirements: cam_base ("CAM BASE")
.
- create(double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
-
Create a new holder section item
License requirements: cam_base ("CAM BASE")
.
- create(InspectionGroup, InspectionGroup, InspectionGroup, InspectionGroup, String, String, OperationCollection.UseDefaultName, String) - Method in interface nxopen.cam.InspectionOperationCollection
-
Create an operation of the specified type and subtype under the parent groups.
- create(NCGroup, NCGroup, NCGroup, NCGroup, String, String, OperationCollection.UseDefaultName, String) - Method in interface nxopen.cam.OperationCollection
-
Create an operation of the specified type and subtype under the parent groups.
- create(NXObject, double, NXObject) - Method in interface nxopen.cam.PreprocessGeometryBuilder
-
Create new facet body
License requirements: None.
- create(String, int, int, double, double, double, double, int, int) - Method in interface nxopen.cam.TrackingBuilder
-
Create a new trackpoint, values of name,xOffset and yOffset may will be changed
License requirements: cam_base ("CAM BASE")
.
- CREATE - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetMode
-
create mode
- create(String) - Method in interface nxopen.drawings.SheetTemplateManager
-
Creates drawings via the sheet template, given a path to sheet template
License requirements: drafting ("DRAFTING")
.
- create(String) - Method in interface nxopen.ExpressionCollection
-
Creates an expression
License requirements: None.
- create(String) - Method in interface nxopen.ExpressionGroupCollection
-
Creates an expression group
License requirements: None.
- CREATE - Static variable in class nxopen.features.Feature.BooleanType
-
Create
- CREATE - Static variable in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
-
- CREATE - Static variable in class nxopen.features.shipdesign.PlateBuilder.Types
-
Creates plate body.
- CREATE - Static variable in class nxopen.features.shipdesign.RoomBuilder.Types
-
Creates a room from boundary object and deck
- CREATE - Static variable in class nxopen.features.shipdesign.RoomPanelBuilder.Types
-
- create(BlendStopshortBuilder.Choices, Expression, Edge, boolean, Point) - Method in interface nxopen.geometricutilities.BlendStopshortBuilderCollection
-
Creates an BlendStopshortBuilder.
- CREATE - Static variable in class nxopen.geometricutilities.BooleanOperation.BooleanType
-
Create
- create() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilderCollection
-
Creates an FacePlaneSelectionBuilder.
- create(ScCollector, boolean) - Method in interface nxopen.geometricutilities.FaceSetDataCollection
-
- create(String, LayoutDefinition, boolean) - Method in interface nxopen.LayoutCollection
-
- CREATE - Static variable in class nxopen.mechatronics.ComparisonResult.Category
-
Create category
- CREATE - Static variable in class nxopen.mechatronics.ComparisonResultContext.ResolveConflictAction
-
Create action
- create(String) - Method in interface nxopen.mechatronics.PMNavFolderObjectCollection
-
- create(String, Marker.MarkerType, Link, Point, NXMatrix) - Method in interface nxopen.motion.MarkerCollection
-
Create a
Marker
in the Scenario for Motion+ database.
- create(String) - Static method in exception nxopen.NXException
-
Creates an NXException
- create(Matrix3x3) - Method in interface nxopen.NXMatrixCollection
-
Creates an NXMatrix
License requirements: None.
- create() - Static method in class nxopen.NXRemotableObject.RemotingProtocol
-
Creates a RemotingProtocol that will use an anonymous port
- create(int) - Static method in class nxopen.NXRemotableObject.RemotingProtocol
-
Creates a RemotingPrototcol that will use the specified port
- create(int, RMIClientSocketFactory, RMIServerSocketFactory) - Static method in class nxopen.NXRemotableObject.RemotingProtocol
-
Creates a RemotingPrototcol that will use the specified port and socket factories
- create(AttributeGroupDescription) - Method in interface nxopen.pdm.IAttributeGroupOwner
-
- CREATE - Static variable in class nxopen.pdm.PartOperationBuilder.OperationType
-
Create Part
- create(ControlPoint, boolean, double, double) - Method in interface nxopen.routing.BendCornerCollection
-
- create(ControlPoint, ISegment, ISegment) - Method in interface nxopen.routing.DiscontinuityCornerCollection
-
Creates a discontinuity corner object at the given
ControlPoint
.
- CREATE - Static variable in class nxopen.routing.Operation
-
Create overstock
- CREATE - Static variable in class nxopen.Section.Mode
-
Feature is being created
- CREATE - Static variable in class nxopen.sim.KinematicConfigurator.UniteTypes
-
Create the spinning geometries as individual bodies
- create(Feature) - Method in interface nxopen.SketchEvaluatorCollection
-
- CREATE - Static variable in class nxopen.tooling.ChangeoverManagementBuilder.Types
-
the create mode
- CREATE - Static variable in class nxopen.tooling.CornerDesignBuilder.Types
-
Create operation
- CREATE - Static variable in class nxopen.tooling.EWDraftingBuilder.ModeOption
-
create drawing
- CREATE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.CircOperationTypes
-
create
- CREATE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.RectOperationOption
-
create
- CREATE - Static variable in class nxopen.tooling.ReliefDesignBuilder.Types
-
Create operation
- CREATE - Static variable in class nxopen.tooling.ScrapDesignBuilder.Body
-
Create operation
- CREATE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.Types
-
- create(String, String) - Method in interface nxopen.uf.UFCutter
-
- create() - Method in interface nxopen.uf.UFDbcMld
-
- create(String, String, Tag) - Method in interface nxopen.uf.UFFbmGeom
-
- create(String, String) - Method in interface nxopen.uf.UFNcgeom
-
- create(String, String) - Method in interface nxopen.uf.UFNcmthd
-
- create(String, String) - Method in interface nxopen.uf.UFNcprog
-
- create(String, String) - Method in interface nxopen.uf.UFOper
-
- create(UFPlist.Prefs, double[]) - Method in interface nxopen.uf.UFPlist
-
- create(Tag, String) - Method in interface nxopen.uf.UFSetup
-
- create(UFSubdiv.Type, UFSubdiv.DataStructuresUnion) - Method in interface nxopen.uf.UFSubdiv
-
- create(UFTabnot.SectionPrefs, double[]) - Method in interface nxopen.uf.UFTabnot
-
- create(String, Validation.InputType) - Method in interface nxopen.ValidationCollection
-
Create a new validation object
License requirements: None.
- create0dMesh(int, Tag[], UFSf.Sf0dElementType, double, UFSf.Sf0dDensityType, double) - Method in interface nxopen.uf.UFSf
-
- create0dMeshDistMass(int, Tag[], UFSf.Sf0dElementType, double, UFSf.Sf0dDensityType, double, int) - Method in interface nxopen.uf.UFSf
-
- create1dConnectionMesh(UFSf.Sf1dMeshData, UFSf.OrientationData, int, Tag[], UFSf.MeshGeomMeshdir[], int, Tag[], UFSf.MeshGeomMeshdir[]) - Method in interface nxopen.uf.UFSf
-
- create1dMesh(UFSf.Sf1dMeshData, UFSf.OrientationData, int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFSf
-
- create2dContact(UFMotion.Motion2DContact) - Method in interface nxopen.uf.UFMotion
-
- create3dContact(UFMotion.Motion3DContact) - Method in interface nxopen.uf.UFMotion
-
- create3dGraphBuilder(ResultProbe) - Method in interface nxopen.cae.ResultManager
-
- create3DSymbol(String, String, String, String) - Method in interface nxopen.pid.LibraryAuthoringBuilder
-
Creates a new 3D symbol
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- create3ptClineFbolt(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
-
- create3ptClineFcir(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
-
- create3ptClinePbolt(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
-
- create3ptClinePcir(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
-
- create3Scalars(Tag[]) - Method in interface nxopen.uf.UFPoint
-
- create4dResultAccessReferenceField(FieldManager, Result, ResultParameters, String, String, String) - Method in interface nxopen.cae.ResultManager
-
Creates a result access reference field object that supports 4D (hetergeneous) domains such as time-cartesian.
- create4dResultAccessReferenceFieldWithLimits(FieldManager, Result, ResultParameters, String, String, String, int[], int[]) - Method in interface nxopen.cae.ResultManager
-
Creates a result access reference field object that supports 4D (hetergeneous) domains such as time-cartesian.
- CREATE_AS_AUTOMATIC - Static variable in class nxopen.Sketch.DimensionOption
-
Create dimension as automatic
- CREATE_AS_DRIVING - Static variable in class nxopen.Sketch.DimensionOption
-
Create dimension as driving
- CREATE_AS_NEEDED - Static variable in class nxopen.cam.InspectionMoveBuilder.SensorStrategyTypes
-
Create as needed
- CREATE_AS_REFERENCE - Static variable in class nxopen.Sketch.DimensionOption
-
Create dimension as reference
- CREATE_ATTRIBUTES - Static variable in class nxopen.weld.WeldJointBuilder.Types
-
Create weld joints from attributed ship structures data.
- CREATE_AUTOMATIC - Static variable in class nxopen.weld.WeldJointBuilder.Types
-
Automatic weld joint creation.
- CREATE_BASIC_INSERT - Static variable in class nxopen.tooling.SpecialFormingBuilder.Types
-
- CREATE_BLANK - Static variable in class nxopen.tooling.BlankGeneratorBuilder.Types
-
Create a blank.
- CREATE_CMP_NO_PLOT - Static variable in class nxopen.uf.UFPlot.CreateCmpResultPlot
-
- CREATE_CMP_PLOT - Static variable in class nxopen.uf.UFPlot.CreateCmpResultPlot
-
- CREATE_CMP_PLOT_DIFF_ONLY - Static variable in class nxopen.uf.UFPlot.CreateCmpResultPlot
-
- CREATE_COMPANION_RESULT - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action
-
Deprecated.
- CREATE_COMPANION_RESULT_WITH_MODEL - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action
-
Deprecated.
no longer used
- CREATE_CONFLICT - Static variable in class nxopen.mechatronics.ComparisonResult.Category
-
Conflict from Create category
- CREATE_CONNECTION - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Create Connection command.
- CREATE_CSYS - Static variable in class nxopen.MeasureBuilder.AnnotationType
-
- CREATE_CURVES_AND_DIVIDE_FACE - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.RampStepsType
-
- CREATE_EACH - Static variable in class nxopen.SuppressByExpressionBuilder.ExpressionAction
-
Create one expression per feature
- CREATE_EXPRESSION_FOR_EACH - Static variable in class nxopen.annotations.SuppressPMIBuilder.SuppressionMethodType
-
Creates expressions for controlling the suppression
of each selected PMI object.
- CREATE_FAB - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- CREATE_FABRICATION - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Create Fabrication command.
- CREATE_FIELD - Static variable in class nxopen.cae.ResultsCombinationBuilder.Output
-
- CREATE_FIELD - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.Output
-
- CREATE_FIELD - Static variable in class nxopen.cae.ResultsReductionBuilder.Output
-
- CREATE_IMPORTED_RESULT - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action
-
Deprecated.
no longer used
- CREATE_IMPORTED_SOLUTION - Static variable in class nxopen.cae.ResultsManipulationBuilder.Action
-
Deprecated.
- CREATE_INSERT - Static variable in class nxopen.tooling.GeneralInsertBuilder.Types
-
- CREATE_LAYOUT - Static variable in class nxopen.tooling.BlankLayoutBuilder.Types
-
the type of create blank layout
- CREATE_LINE - Static variable in class nxopen.MeasureBuilder.AnnotationType
-
- CREATE_LINKED_MIRROR_BODY - Static variable in class nxopen.features.shipdesign.MirrorShipStructureBuilder.MirrorApproach
-
The approach by creating linked mirror body.
- CREATE_MANUAL - Static variable in class nxopen.weld.WeldJointBuilder.Types
-
Manual weld joint creation.
- CREATE_MULTIPLE - Static variable in class nxopen.weld.WeldJointBuilder.Types
-
Create multiple weld joints from manual input.
- CREATE_NEW - Static variable in class nxopen.cae.PolygonFaceOnMeshBuilder.SelectBodyMethod
-
Create new body
- CREATE_NEW - Static variable in class nxopen.cae.SolverAppendOption.SolutionOption
-
- CREATE_NEW - Static variable in class nxopen.cam.CutterExport.SaveFlags
-
Create a new entry in tool library
- CREATE_NEW - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.DesignCreationType
-
Design feature is created as a new feature
- CREATE_NEW - Static variable in class nxopen.CGMBuilder.ActionOption
-
Creates a new dataset in Teamcenter
- CREATE_NEW - Static variable in class nxopen.features.CopyPasteBuilder.ExpressionTransferOption
-
New
- CREATE_NEW - Static variable in class nxopen.features.PatternFeatureBuilder.ExpressionTransferOptions
-
New
- CREATE_NEW - Static variable in class nxopen.features.shipdesign.TransitionBuilder.TransitionMethods
-
- CREATE_NEW - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.DrawingCreateOrEdit
-
- CREATE_NEW_DATAIF_NONE_EXISTS - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SnapshotDataToUseType
-
This option will create new sanpshot data if none exists
- CREATE_NEW_DATAIF_NONE_EXISTS - Static variable in class nxopen.drawings.VisualDrawingComparePrefsBuilder.VisualDrawingComparePrefsOverlayDataToUse
-
This option will create new data if none exists
- CREATE_NEW_LOAD_CASES - Static variable in class nxopen.cae.CompanionResultBuilder.ResultAppendMethod
-
Companion results will be created in new separate load cases
- CREATE_NEW_LOAD_CASES - Static variable in class nxopen.cae.ResultsManipulationBuilder.ResultAppendMethod
-
- CREATE_ORDINATE_DIMENSION - Static variable in class nxopen.tooling.AutoDimensionBuilder.MainType
-
- CREATE_PART_FUN - Static variable in class nxopen.uf.UFUi.FunType
-
- CREATE_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- CREATE_PATH - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Create Path command.
- CREATE_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- CREATE_PLATFORM - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Create Platform command.
- CREATE_POINT - Static variable in class nxopen.routing.SplinePathBuilder.DefiningPointMethod
-
- CREATE_PORT_CONNECTION - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the creating a connection between two ports.
- CREATE_POST_VIEW - Static variable in class nxopen.cae.ResultsReductionBuilder.Output
-
- CREATE_PRISM_ERROR - Static variable in class nxopen.uf.UFConstants
-
- CREATE_RAMP - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.RampStepsType
-
- CREATE_RUN - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Create Run command.
- CREATE_SHARED - Static variable in class nxopen.SuppressByExpressionBuilder.ExpressionAction
-
Create one common expression for all features
- CREATE_SHARED_EXPRESSION - Static variable in class nxopen.annotations.SuppressPMIBuilder.SuppressionMethodType
-
Creates a single expression for controlling
the suppression of the selected PMI objects and
suppresses them.
- CREATE_SOLIDS - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Action
-
Create solids of interference volumes.
- CREATE_SPECIFICATION - Static variable in class nxopen.pdm.PartOperationCreateBuilder.OperationSubType
-
Create Specification and not a Part
- CREATE_TABLE - Static variable in class nxopen.tooling.HoleReportBuilder.Types
-
the hole table type of create hole table
- CREATE_TORUS_ERROR - Static variable in class nxopen.uf.UFConstants
-
- createAbsolutePositionBuilder(Part) - Method in interface nxopen.CollaborativeContentManager
-
Creates a
AbsolutePositionBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX10.0.0
- createAccelerometerBuilder(Accelerometer) - Method in interface nxopen.mechatronics.AccelerometerCollection
-
- createAccessorEvaluatorBuilder(Part, ExpressionEvaluator) - Method in interface nxopen.ame.AMEManager
-
Creates a
AccessorEvaluatorBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createAcisExporter() - Method in interface nxopen.DexManager
-
Create the Acis Exporter
License requirements: None.
- createAcisImporter() - Method in interface nxopen.DexManager
-
Create the Acis Importer
License requirements: None.
- createActivewebFile(String, String, String, String, String, String, String, String, String, String, double, int) - Method in interface nxopen.uf.UFStd
-
- createAdapterFormulaBuilder(AdapterFormula) - Method in interface nxopen.mechatronics.AdapterFormulaCollection
-
- createAdapterSignalBuilder(AdapterSignal) - Method in interface nxopen.mechatronics.AdapterSignalCollection
-
- createAdaptiveShellBuilder(AdaptiveShell) - Method in interface nxopen.features.FeatureCollection
-
Creates a
AdaptiveShellBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createAddComponentBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
Creates a
AddComponentBuilder
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX12.0.0
- createAddComponentBuilder() - Method in interface nxopen.mechatronics.FunctionObjectCollection
-
Creates a
AddComponentBuilder
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX7.5.1
- createAddDataSetBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
AddDataSetBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX12.0.0
- createAddendumSectionBuilder(Feature) - Method in interface nxopen.die.DieCollection
-
Creates/Edits the addendum section builder.
- createAddendumSectionUserDefinedBuilder() - Method in interface nxopen.die.DieCollection
-
Creates a user defined addendum section builder.
- createAddFontBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
AddFontBuilder
for creating user-defined line fonts
to use with line segments.
- createAddObjectsToRegionBuilder() - Method in interface nxopen.drawings.DrawingRegionCollection
-
Creates add objects to region builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- createAddRemoveBoxViewBuilder(DraftingView) - Method in interface nxopen.drawings.DraftingViewCollection
-
- createAddSubmechanismBuilder(NXObject) - Method in interface nxopen.motion.MotionSimulation
-
- createAddSurfBuilder(Feature) - Method in interface nxopen.die.DieCollection
-
- createAddTicBuilder(FrameBar) - Method in interface nxopen.annotations.FrameBarCollection
-
Creates a
AddTicBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX8.0.0
- createAdjacentFaceMethod(CAEFace) - Method in interface nxopen.cae.SmartSelectionManager
-
- createAdjacentFaceMethod(CAEFace[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createAdjacentFaceMethod(CAEFace[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a adjacent face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createAdjacentFaceMethod(CAEEdge) - Method in interface nxopen.cae.SmartSelectionManager
-
- createAdjacentFaceMethod(CAEEdge[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createAdjacentFaceMethod(CAEEdge[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a adjacent face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createAdmMoveFaceBuilder(AdmMoveFace) - Method in interface nxopen.features.FeatureCollection
-
Creates a
AdmMoveFaceBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createAdmOffsetRegionBuilder(AdmOffsetRegion) - Method in interface nxopen.features.FeatureCollection
-
Creates a
AdmOffsetRegionBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createAdmResizeFaceBuilder(AdmResizeFace) - Method in interface nxopen.features.FeatureCollection
-
Creates a
AdmResizeFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createAdvancedFlangeBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
AdvancedFlangeBuilder
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
Created in NX11.0.0
- createAdvancedSolutionBuilder(AdvancedSolution) - Method in interface nxopen.motion.MotionSolutionCollection
-
Creates a
AdvancedSolution
License requirements: mechanisms ("MECHANISMS")
Created in NX12.0.0
- createAeroFlangeBuilder(AeroFlange) - Method in interface nxopen.features.AeroCollection
-
Creates a
AeroFlangeBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createAeroLighteningCutoutBuilder(Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
-
Creates a
AeroLighteningCutoutBuilder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
Created in NX5.0.0
- createAeroRibBuilder(AeroRib) - Method in interface nxopen.features.AeroCollection
-
Creates a
AeroRibBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createAestheticFaceBlendBuilder(AestheticFaceBlend) - Method in interface nxopen.features.FeatureCollection
-
Creates a
AestheticFaceBlendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX7.5.0
- createAfuAbscissaHeaderInfo() - Method in interface nxopen.cae.AfuManager
-
Creates an afu abscissa header information data object
License requirements: None.
- createAfuData(AfuData.AbscissaType) - Method in interface nxopen.cae.AfuManager
-
Create an AFU Data Record object with specified axis definition
License requirements: None.
- createAfuHeaderId() - Method in interface nxopen.cae.AfuManager
-
Create an AFU Header Id object
License requirements: None.
- createAfuOrdinateHeaderInfo() - Method in interface nxopen.cae.AfuManager
-
Creates an afu ordindate header information data object
License requirements: None.
- createAfuZHeaderInfo() - Method in interface nxopen.cae.AfuManager
-
Create an afu Z axis header information data object
License requirements: None.
- createAlignBeamElementDirectionBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating align 1D element direction builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createAlignBodyBuilder(AlignBody) - Method in interface nxopen.mechatronics.AlignBodyCollection
-
- createAlignmentBuilder() - Method in interface nxopen.cae.SimSolution
-
Creates the builder object for test and imported solution alignment dialog
License requirements: nx_correl_base ("FE Correlation")
.
- createAlignShellElementFirstEdgeBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
- createAlignShellElementNormalBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating align 2D element normal builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createAlignStockBuilder() - Method in interface nxopen.routing.RouteManager
-
- createAll() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Creates all drawings.
- createAllAroundVisionBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createAllAroundVisionBuilder(AllAroundVision) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
AllAroundVisionBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createAlongCurve(Tag, Tag, Tag, UFSo.PointAlongCurveOption, boolean) - Method in interface nxopen.uf.UFPoint
-
- createAlongGuideCutBuilder(AlongGuideCut) - Method in interface nxopen.features.ShipCollection
-
Creates a
AlongGuideCutBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
- createAlongMachineAxisMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Move To Machine Position.
- createAlongMcsAxisMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Move to MCS Position
License requirements: cam_base ("CAM BASE")
.
- createAlongToolAxisMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Move Along Tool Axis
License requirements: cam_base ("CAM BASE")
.
- createAlternateIdInformation() - Method in interface nxopen.pdm.AlternateIdManager
-
- createAnalysisTypeBuilder(DurSpecialistAnalysisType) - Method in interface nxopen.cae.DurSpecialistAnalysisTypeCollection
-
- createAnalyticalContactBuilder(AnalyticalContact) - Method in interface nxopen.motion.AnalyticalContactCollection
-
- createAnalyticalContactPropertyBuilder(AnalyticalContactProperty) - Method in interface nxopen.motion.AnalyticalContactPropertyCollection
-
- createAnalyzePocketBuilder(AnalyzePocket) - Method in interface nxopen.features.FeatureCollection
-
Creates a
AnalyzePocketBuilder
License requirements: features_modeling ("FEATURES MODELING")
Created in NX9.0.0
- createAncestorEvaluatorBuilder(Part, ExpressionEvaluator) - Method in interface nxopen.ame.AMEManager
-
Creates a
AncestorEvaluatorBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createAnchor(Point3d) - Method in interface nxopen.routing.AnchorCollection
-
- createAnchor(Point3d, Point) - Method in interface nxopen.routing.AnchorCollection
-
- createAnchorFace() - Method in interface nxopen.die.QuickBinderBuilder
-
Create initial face approximated from the selected faces.
- createAnchorFromPnt(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- createAnchorFromPos(Tag, double[]) - Method in interface nxopen.uf.UFRoute
-
- createAndCondition() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createAngle(Tag, UFGexp.Qualifier, Tag, Tag, UFGexp.Qualifier, Tag) - Method in interface nxopen.uf.UFGexp
-
- CreateAngleData() - Constructor for class nxopen.uf.UFGexp.CreateAngleData
-
- createAngleDimension() - Method in interface nxopen.SketchChamferBuilder
-
Returns the flag to indicate whether to create a dimension for
SketchChamferBuilder.angle()
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createAngleDimension(boolean) - Method in interface nxopen.SketchPolygonBuilder
-
The flag to indicate if we need to create angle dimension
License requirements: None.
- createAngularDim(int, UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createAngularDimensionBuilder(BaseAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createAngularDimensionBuilder(AngularDim) - Method in interface nxopen.features.FeatureCollection
-
Creates a
AngularDimBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createAngularDimensionBuilder(AngularDimension) - Method in interface nxopen.SketchCollection
-
- createAngularLimitJointBuilder(AngularLimitJoint) - Method in interface nxopen.mechatronics.AngularLimitJointCollection
-
- createAngularSpringJointBuilder(AngularSpringJoint) - Method in interface nxopen.mechatronics.AngularSpringJointCollection
-
- createAnimation(String, String, int, int) - Method in interface nxopen.uf.UFDisp
-
- createAnimationConversionBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createAnimationPolyline() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Creates animation polyline
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- createAnnotateViewsBuilder() - Method in interface nxopen.drafting.AutomationManager
-
- createAnnotation(int, String, int, boolean, String[]) - Method in interface nxopen.cae.Post
-
- createAnnotation(int, String, int[], int[], String[]) - Method in interface nxopen.cae.Post
-
- createAnnotation(int, String, int[], int[], int[], String[]) - Method in interface nxopen.cae.Post
-
- createAnnotation(int, String, double, double, String[]) - Method in interface nxopen.cae.Post
-
- createAnnotationBuilder(int) - Method in interface nxopen.cae.Post
-
Creates an Annotation builder object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- createAnnotationBuilder(Annotation) - Method in interface nxopen.diagramming.AnnotationCollection
-
- createAnnotationEditSettingsBuilder(DisplayableObject[]) - Method in interface nxopen.drafting.SettingsManager
-
Creates a
EditSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
- createAocsBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates an Offset In Face builder
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createApexCurve() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- createApexCurve() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns whether an apex curve should be created.
- createAppendedTextEditorBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createApplicationBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createArbitraryAreaSeedBuilder() - Method in interface nxopen.annotations.PmiManager
-
- createArbitraryTarget(ArbitraryTargetData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a PMI arbitrary target
License requirements: geometric_tol ("GDT")
.
- createArbitraryTarget(ArbitraryTargetData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a drafting arbitrary target
License requirements: drafting ("DRAFTING")
.
- createArc(Point3d, Point3d, Point3d, boolean) - Method in interface nxopen.CurveCollection
-
Creates an
Arc
that passes through the three specified points.
- createArc(Point3d, NXMatrix, double, double, double) - Method in interface nxopen.CurveCollection
-
- createArc(Point3d, Vector3d, Vector3d, double, double, double) - Method in interface nxopen.CurveCollection
-
- createArc(UFCurve.Arc) - Method in interface nxopen.uf.UFCurve
-
- createArc3point(Tag, Tag, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArc3point(Tag, Tag, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFSfCurve
-
- createArc3tangent(Tag, Tag, Tag, UFCurve.HelpData[], UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcCenter2Pnts(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createArcCenterRadius(Tag, double, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcCenterRadius(Tag, double, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFSfCurve
-
- createArcCenterTangent(Tag, Tag, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArchiveImportBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder to import a Sinumerik archive file
License requirements: nx_isv_mtb ("Machine Tool Builder")
.
- createArclengthDim(UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createArcLengthDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates an arc length dimension
License requirements: drafting ("DRAFTING")
.
- createArcPointCenter(Tag, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcPointCenter(Tag, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFSfCurve
-
- createArcPointPointRadius(Tag, Tag, double, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcPointPointRadius(Tag, Tag, double, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFSfCurve
-
- createArcPointPointTangent(Tag, Tag, Tag, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcPointTangentPoint(Tag, Tag, Tag, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcPointTangentRadius(Tag, Tag, double, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcPointTangentTangent(Tag, Tag, Tag, UFCurve.HelpData[], UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcRadiusAngles(Tag, UFSo.UpdateOption, Tag, Tag, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createArcTangentPointPoint(Tag, Tag, Tag, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcTangentPointTangent(Tag, Tag, Tag, UFCurve.HelpData[], UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcTangentTangentPoint(Tag, Tag, Tag, UFCurve.HelpData[], UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcTangentTangentRadius(Tag, Tag, double, UFCurve.HelpData[], UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createArcThreePoints(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createArcThru3pts(int, double[], double[], double[]) - Method in interface nxopen.uf.UFCurve
-
- createArcXform2Points(Tag, UFSo.UpdateOption, Tag, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createAreafill(int, int[], Tag[], Tag) - Method in interface nxopen.uf.UFDrf
-
- createArrayHole(int) - Method in interface nxopen.tooling.FastenerAssy
-
Creates array hole data for the fastener assembly
License requirements: None.
- createArrayRecord2d(String, String, int) - Method in interface nxopen.cae.ftk.DataManager
-
Creates 2d array record
License requirements: None.
- createArrayRecord2dEvenSpacing(String, String) - Method in interface nxopen.cae.ftk.DataManager
-
Creates 2d array record with even spacing
License requirements: None.
- createArrayRecord3d(String, String, int) - Method in interface nxopen.cae.ftk.DataManager
-
Creates 3d array record
License requirements: None.
- createArrayRecordUnit(XyFunctionUnit) - Method in interface nxopen.cae.ftk.DataManager
-
- createArrayUnit(Unit) - Method in interface nxopen.cae.ftk.DataManager
-
Creates array unit by nx system unit
License requirements: None.
- createArrayUnit(XyFunctionMeasure, XyFunctionUnit) - Method in interface nxopen.cae.ftk.DataManager
-
- createArrayUnit(Unit, String) - Method in interface nxopen.cae.ftk.DataManager
-
Creates array unit by NX unit with new alias measure type name.
- createArrayUnit(BaseUnit, BaseUnit) - Method in interface nxopen.cae.ftk.DataManager
-
Creates array unit by numerator and denominator unit
License requirements: None.
- createAscImporter() - Method in interface nxopen.DexManager
-
Create the ASC Importer
License requirements: nx_layout ("NX Layout")
.
- CREATEASNEEDED - Static variable in class nxopen.cam.InspectionSensorMassEditBuilder.SensorStrategyType
-
Create as needed
- createAsPartingSurface() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the option to create surface as parting surface
License requirements: None.
- createAspectNavigatorPreferencesBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a builder for the aspect navigator preferences dialog
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createAspectPrefixBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
AspectPrefixBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createAssembliesGeneralPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
-
Create the Assemblies.AssembliesGeneralPropertiesBuilder
License requirements: None.
- createAssembliesParameterPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
-
Create the Assemblies.AssembliesParameterPropertiesBuilder
License requirements: None.
- createAssemblyCut(Tag, boolean, int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFAssem
-
- createAssemblyCutBuilder(AssemblyCut) - Method in interface nxopen.features.FeatureCollection
-
Creates a
AssemblyCutBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createAssemblyDrawingBuilder() - Method in interface nxopen.tooling.ToolingDrawingCollection
-
Creates assembly drawing builder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createAssemblyFromLayout2dBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
AssemblyFromLayout2dBuilder
that can create assembly from
the selected layout
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
- createAssemblyNodeForRegionSheet(String) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Create linked body for region sheet other than the cavity or core sheet
License requirements: None.
- createAssignAspectBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
AssignAspectBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createAssignCornerBuilder(Part, Component) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createAssignCornerBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
AssignCornerBuilder
which creates corner
License requirements: routing_base ("Routing Basic")
Created in NX6.0.0
- createAssignCornerBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
-
Creates a
AssignCornerBuilder
which creates corner
License requirements: routing_base ("Routing Basic")
Created in NX9.0.0
- createAssignDiscontinuityBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
-
Creates a
AssignDiscontinuityBuilder
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX7.5.0
- createAssignNodalCsBuilder() - Method in interface nxopen.cae.NodeElementInfoManager
-
Creates a builder for assigning nodal cs
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createAssignPathBuilder(Run) - Method in interface nxopen.routing.RouteManager
-
Creates a
AssignPathBuilder
License requirements: routing_base ("Routing Basic")
Created in NX8.5.0
- createAssignProxyBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Creates a proxy port assigned to a connector.
- createAssignSubnetBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
AssignSubnetBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createAssignTangencyBuilder() - Method in interface nxopen.routing.SplinePathBuilder
-
- createAssignTemplateToProductBuilder(ProductDefinition) - Method in interface nxopen.ame.AMEManager
-
- createAssignTypeBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
AssignTypeBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createAssociateDimensionBuilder(Dimension) - Method in interface nxopen.annotations.AnnotationManager
-
Creates the Dimension Associativity builder
License requirements: None.
- createAssociativeArcBuilder(AssociativeArc) - Method in interface nxopen.features.BaseFeatureCollection
-
- createAssociativeArcBuilder(Arc) - Method in interface nxopen.features.BaseFeatureCollection
-
- createAssociativeLineBuilder(AssociativeLine) - Method in interface nxopen.features.BaseFeatureCollection
-
- createAssociativeLineBuilder(Line) - Method in interface nxopen.features.BaseFeatureCollection
-
- createAssociativeMarker(int, AnchorType, double) - Method in interface nxopen.cae.xyplot.Graph
-
Creates an associative marker.
- createAssociativeText() - Method in interface nxopen.annotations.AnnotationManager
-
- createAssociativityBuilder(Dimension, int) - Method in interface nxopen.annotations.AnnotationManager
-
Creates the Dimension Associativity builder
License requirements: None.
- createAssortpartAid(UFDrf.AssortpartArc, UFDrf.AssortpartArrow, UFDrf.AssortpartLine, UFDrf.AssortpartText) - Method in interface nxopen.uf.UFDrf
-
- createAssortpartDim(UFDrf.AssortpartArc, UFDrf.AssortpartArrow, UFDrf.AssortpartLine, UFDrf.AssortpartText) - Method in interface nxopen.uf.UFDrf
-
- createAtConicCenter(Tag) - Method in interface nxopen.uf.UFPoint
-
- createAtIntersectionOfTwoCurves(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFPoint
-
- createAttachElementsBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for attach elements command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createAttachmentForBookMark() - Method in interface nxopen.issue.IssueManager
-
Creates a
IssueAttachment
for BookMark
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- createAttachmentForScreenImage() - Method in interface nxopen.issue.IssueManager
-
Creates a
IssueAttachment
for ScreenImage
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- createAttachmentForSnapshot(String, String, String) - Method in interface nxopen.issue.IssueManager
-
Creates a
IssueAttachment
for Sanpshot
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- createAttribute() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Create the attribute from the data set in the builder.
- createAttribute() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
Create the attribute from the data set in the builder.
- createAttribute(UFFam.AttributeData) - Method in interface nxopen.uf.UFFam
-
- createAttributeGroupReviseBuilder(AttributeGroup[]) - Method in interface nxopen.pdm.IAttributeGroupOwner
-
- createAttributeGroupReviseBuilder(AttributeGroup[], boolean, AttributeGroupReviseBuilder.SaveAsActionType) - Method in interface nxopen.pdm.IAttributeGroupOwner
-
The builder will do a revise or save-as operation for each attribute group in the input list of existing attribute groups
depending on input operation type.
- createAttributeHolder() - Method in interface nxopen.routing.RouteManager
-
Creates a
AttributeHolder
to set Template Attributes and
then copying Template Attributes to Routing Objects.
- createAttributeItemBuilder() - Method in interface nxopen.drafting.AutomationManager
-
- createAttributeIterator() - Method in interface nxopen.NXObject
-
Create an attribute iterator
License requirements: None.
- createAttributeListEntry(boolean, boolean, boolean, String, int, int, String) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
- createAttributeListEntry(boolean, boolean, boolean, boolean, String, int, int, String) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
Create an attribute list entry, that has no value, and add it to the list.
- createAttributePropertiesBuilder(BasePart, NXObject[], AttributePropertiesBuilder.OperationType) - Method in interface nxopen.AttributeManager
-
Creates the AttributePropertiesBuilder
License requirements: None.
- createAttributePropertiesBuilder() - Method in interface nxopen.pdm.PartCreationObject
-
- createAttributePropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
-
- createAttributeRecipe(String, CaeSetGroupFilterType, boolean, CaeSetGroupFilterType) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Creates an Attribute based Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createAttributeSearchTerm(SearchTerm.SearchTermLogicType, String, String[], String[]) - Method in interface nxopen.assemblies.SubsetRecipe
-
Creates a
AttributeSearchTerm
and
adds it to the recipe at the end of the list of search terms.
- createAttributeSearchTermBuilder(AttributeSearchTerm) - Method in interface nxopen.assemblies.SubsetCollection
-
- createAttributeTemplatesBuilder() - Method in interface nxopen.PropertiesManager
-
Create the AttributeTemplatesBuilder
License requirements: None.
- createAttributeTitleToNamingPatternMap(String[], String[]) - Method in interface nxopen.IAttributeSourceObjectBuilder
-
Creates a map object of attribute titles to their corresponding naming pattern
License requirements: None.
- createAttributeValueColor3Builder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
-
- createAttributeValueColor4Builder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
-
- createAttributeValueFileBuilder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
-
- createAttributeValueFloat3Builder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
-
- createAttributeValueFloat4Builder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
-
- createAttributeValueIntegerBuilder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
-
- createAttributeValueNumberBuilder(TaggedObject) - Method in interface nxopen.display.CgfxAttrCollection
-
- createAutoBcBuilder(String, String) - Method in interface nxopen.cae.SimSimulation
-
Creates a
AutoBCBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX6.0.0
- createAutoBcRecipe(String, String) - Method in interface nxopen.cae.SimRecipeCollection
-
Creates a
SimAutoBcRecipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.0
- createAutoConstrainBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchAutoConstrainBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
- createAutoCyclicSymmetryPairsBuilder(String) - Method in interface nxopen.cae.SimSimulation
-
Creates a
AutoCyclicSymmetryPairsBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX11.0.0
- createAutoDimensionBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchAutoDimensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createAutoDimensionBuilder() - Method in interface nxopen.tooling.ToolingDrawingCollection
-
Creates auto dimension builder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createAutoFaceSubdiv(Tag[], int, double, int, int) - Method in interface nxopen.uf.UFSf
-
- CreateAutoFaceSubdivData() - Constructor for class nxopen.uf.UFSf.CreateAutoFaceSubdivData
-
- createAutoGroups(CaeGroupCollection.AutoGroupTypes, CaeGroupCollection.AutoGroupSeedNames) - Method in interface nxopen.cae.CaeGroupCollection
-
Auto group CAE entities based on attributes
Types (attribute types) by which auto grouping needs to be done should be specified using
the JA CAE_GROUP_COLLECTION_auto_group_types structure.
- createAutoGroups(Mesh[], CaeGroupCollection.AutoGroupTypes, CaeGroupCollection.AutoGroupSeedNames) - Method in interface nxopen.cae.CaeGroupCollection
-
Auto group CAE entities based on attributes
Types (attribute types) by which auto grouping needs to be done should be specified using
the JA CAE_GROUP_COLLECTION_auto_group_types structure.
- CreateAutoGroupsData() - Constructor for class nxopen.cae.CaeGroupCollection.CreateAutoGroupsData
-
- createAutoHealGeometryBuilder() - Method in interface nxopen.cae.AbstractionManager
-
Creates a
AutoHealGeometryBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- createAutoMacViewerBuilder(TaggedObject) - Method in interface nxopen.cae.PreTestSolutionCollection
-
Creates an AutoMAC results display builder
License requirements: nx_correl_base ("FE Correlation")
.
- createAutomaticCenterlineBuilder() - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the AutomaticCenterlineBuilder
License requirements: None.
- createAutomaticMorphBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for Automatic Morphing command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createAutomaticTraceline(Explosion, Point, Direction, Point, Direction, Matrix3x3, AutomaticTraceline.ModeOption, int, double, double, int[], double[]) - Method in interface nxopen.TracelineCollection
-
Create an automatic traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- createAutoPairsBuilder(String) - Method in interface nxopen.cae.SimSimulation
-
Creates a
AutoPairsBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.0
- createAutoPointBuilder(Feature) - Method in interface nxopen.weld.WeldManager
-
- createAutoWeldSymbolsBuilder() - Method in interface nxopen.weld.WeldManager
-
- createAuxfun(UFVariant, int, String) - Method in interface nxopen.uf.UFPath
-
- createAxis(Point, Direction, SmartObject.UpdateOption) - Method in interface nxopen.AxisCollection
-
- createAxis(Point3d, Vector3d, SmartObject.UpdateOption) - Method in interface nxopen.AxisCollection
-
Create a non-associative axis
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createAxis(Axis, Xform, SmartObject.UpdateOption) - Method in interface nxopen.AxisCollection
-
- createAxisBuilder(KinematicComponent, KinematicJunction, KinematicAxis) - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a kinematic axis
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createAxisDoubles(Tag, UFSo.UpdateOption, double[], double[]) - Method in interface nxopen.uf.UFSo
-
- createAxisExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createAxisPointDir(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createAxiSymmetricParameters() - Method in interface nxopen.cae.ResultManager
-
Creates a axisymmetric object based on an existing Post View
It is user's responsibility to destroy the result access object once done
using
ResultManager.deleteAxiSymmetricParameters(nxopen.cae.AxiSymmetricParameters)
, in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX11.0.0
- createBackground(View, boolean) - Method in interface nxopen.ViewCollection
-
- createBackingPadBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates backing pad builder.
- createBallGroove(double[], double[], String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createBallJointBuilder(BallJoint) - Method in interface nxopen.mechatronics.BallJointCollection
-
- createBalloonNoteBuilder(BalloonNote) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createBallSlot(double[], double[], double[], String, String, String, Tag, Tag, Tag) - Method in interface nxopen.uf.UFModl
-
- createBarrelToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a barrel builder
License requirements: cam_base ("CAM BASE")
.
- createBaseDataBuilder() - Method in interface nxopen.features.AutomotiveCollection
-
- createBaseDataBuilder() - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
BaseDataBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createBaseDataImportExportBuilder() - Method in interface nxopen.features.AutomotiveCollection
-
- createBaseDataImportExportBuilder() - Method in interface nxopen.features.VehicleDesignCollection
-
- createBaseDataSourceBuilder() - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
BaseDataSourceBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX11.0.1
- createBaseView(ModelingView, Point3d, double, boolean) - Method in interface nxopen.drawings.SheetDraftingViewCollection
-
For the selected part adds the base view as well as returns the reference to
DraftingView
.
- createBaseViewBuilder(BaseView) - Method in interface nxopen.drawings.DraftingViewCollection
-
Creates the Base View Builder
License requirements: drafting ("DRAFTING")
.
- createBasicDesignData() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Creates a empty basic design data object.
- createBasins() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the basin curves should be created
License requirements: None.
- createBcBuilderForBc(SimBC) - Method in interface nxopen.cae.SimSimulation
-
Creates a boundary condition builder for the boundary condition passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createBcBuilderForConstraintDescriptor(String, String) - Method in interface nxopen.cae.SimSimulation
-
Creates a BC builder for the constraint descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createBcBuilderForConstraintDescriptor(String, String, int) - Method in interface nxopen.cae.SimSimulation
-
Creates a BC builder for the constraint descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createBcBuilderForLoadDescriptor(String, String) - Method in interface nxopen.cae.SimSimulation
-
Creates a BC builder for the load descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createBcBuilderForLoadDescriptor(String, String, int) - Method in interface nxopen.cae.SimSimulation
-
Creates a BC builder for the load descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createBcBuilderForSimulationObjectDescriptor(String, String) - Method in interface nxopen.cae.SimSimulation
-
Creates a boundary condition builder for the simulation object descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createBcBuilderForSimulationObjectDescriptor(String, String, int) - Method in interface nxopen.cae.SimSimulation
-
Creates a boundary condition builder for the simulation object descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createBcLabelManagerBuilder() - Method in interface nxopen.cae.SimSimulation
-
Creates a
BcLabelManagerBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX11.0.0
- createBcSelectionDisplayBuilder() - Method in interface nxopen.cae.SimSimulation
-
Creates a builder for boundary condition selection display controls command to display boundary condition's selection CAE geometries
with this boundary condition's persistent display color
License requirements: nx_design_sim ("NX Design Simulation")
.
- createBcurveThruPoints(UFSo.UpdateOption, int, Tag[], double, int, int, Tag, Tag, int, int) - Method in interface nxopen.uf.UFSo
-
- createBeadDesignFeature() - Method in interface nxopen.weld.WeldManager
-
Create a Weld Bead Design Feature part and make it the session work part.
- createBeadFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Bead feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createBeamEadBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Beam EAD block.
- createBeamEadBuilder(FEElement) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Beam EAD block and initializes it with the input element if defined.
- createBeamElementInfoHandler() - Method in interface nxopen.cae.ElementInfoUtils
-
Returns a
BeamElementInfoHandler
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX11.0.0
- createBeamForceBuilder(BeamForce) - Method in interface nxopen.motion.BeamForceCollection
-
Creates a
BeamForceBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX12.0.0
- createBendByRadius(Tag, double) - Method in interface nxopen.uf.UFRoute
-
- CreateBendByRadiusData() - Constructor for class nxopen.uf.UFRoute.CreateBendByRadiusData
-
- createBendByRatio(Tag, double) - Method in interface nxopen.uf.UFRoute
-
- CreateBendByRatioData() - Constructor for class nxopen.uf.UFRoute.CreateBendByRatioData
-
- createBendByTable(Tag, String) - Method in interface nxopen.uf.UFRoute
-
- CreateBendByTableData() - Constructor for class nxopen.uf.UFRoute.CreateBendByTableData
-
- createBendFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Bend feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createBendInsertDesignBuilder() - Method in interface nxopen.tooling.BendInsertDesignCollection
-
Creates Bend Insert Design builder.
- createBendListBuilder() - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
BendListBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
Created in NX12.0.0
- createBendListItemBuilder() - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
BendListItemBuilder
BendListItemBuilder objects will be created and populated in the BendListBuilder when bend information of a flat pattern view is populated.
- createBendOperation(UFModl.BendOperationData) - Method in interface nxopen.uf.UFModlSmd
-
- createBendOperationBuilder() - Method in interface nxopen.tooling.BendOperationCollection
-
- createBendSegment(String, String, String, FlexibleCableBuilder.BendAngleDirectionOptions, FlexibleCableBuilder.PathAdjustmentAngleDirectionOptions, int) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
- createBendSequence(Tag, int, UFSmd.SeqInput[], int) - Method in interface nxopen.uf.UFSmd
-
- createBendsOfRadialBends() - Method in interface nxopen.formboard.UpdateFormboardBuilder
-
Creates bends for radial bends after all discrepanices have been fixed.
- createBendTableBuilder(BendTable) - Method in interface nxopen.annotations.BendTableCollection
-
If null create a new bend table, otherwise edit existing bend table
License requirements: drafting ("DRAFTING")
.
- createBendTaperBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Bend taper feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createBestFitAlignBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
BestFitAlignBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
Created in NX6.0.0
- createBlankBuilder() - Method in interface nxopen.tooling.ElectrodeDesignCollection
-
Creates Design Blank builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- createBlankFromBoundary(Tag, int, Tag[], UFCambnd.BoundaryData, UFCambnd.AppData[], double, double, double) - Method in interface nxopen.uf.UFTurn
-
- createBlankGeneratorBuilder() - Method in interface nxopen.tooling.BlankGeneratorCollection
-
Creates blank generator builder.
- createBlankLayoutBuilder() - Method in interface nxopen.tooling.BlankLayoutCollection
-
Creates create blank layout builder
License requirements: None.
- createBlankNestingBuilder() - Method in interface nxopen.tooling.BlankNestingCollection
-
Creates Dialog builder.
- createBlankOption() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the method used to create a blank.
- createBlend(String, Tag[], int, int, int, double) - Method in interface nxopen.uf.UFModlFeatures
-
- createBlendCornerBuilder(BlendCorner) - Method in interface nxopen.features.FreeformSurfaceCollection
-
Creates a
BlendCornerBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- createBlendCurve3dBuilder() - Method in interface nxopen.tooling.CAMDataManager
-
Creates a
BlendCurve3DBuilder
License requirements: nx_freeform_2 ("advanced freeform modeling") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
- createBlendCurves() - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Creates the blend curves for preview.
- createBlendPocketBuilder(BlendPocket) - Method in interface nxopen.features.FeatureCollection
-
Creates a
BlendPocketBuilder
License requirements: features_modeling ("FEATURES MODELING")
Created in NX9.0.0
- createBlendSetbackBuilder() - Method in interface nxopen.features.BlendCornerBuilder
-
Create a blend setback builder object.
- createBlock(UFModl.FeatureSigns, Tag, double[], String[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createBlock1(UFModl.FeatureSigns, double[], String[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createBlockCline(UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
-
- createBlockFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Block feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createBlockLoadEventBuilder(DurSpecialistBlockLoadEvent) - Method in interface nxopen.cae.DurSpecialistLoadProviderCollection
-
- createBodyByEquationBuilder(BodyByEquation) - Method in interface nxopen.features.FeatureCollection
-
Creates a
BodyByEquationBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX12.0.0
- createBodyContactBuilder(BodyContact) - Method in interface nxopen.motion.BodyContactCollection
-
Creates a
BodyContactBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
- createBoltBuilder(Bolt) - Method in interface nxopen.cae.BoltCollection
-
Creates a builder for Bolt Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createBoltCircleCenterlineBuilder(BoltCircleCenterline) - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the BoltCircleCenterline builder
License requirements: None.
- createBom(RouteManager.BomLevel, RouteManager.BomStockLength, RouteManager.BomFabrication, RouteManager.BomBlankLines, Part) - Method in interface nxopen.routing.RouteManager
-
Creates Bill of Material (BOM).
- createBomBuilder() - Method in interface nxopen.tooling.BomCollection
-
Creates a BOM builder
License requirements: None.
- createBomListBuilder() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates Bom List builder.
- createBomListDataProvider() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates a data provider for BOM list.
- createBooleanBuilder(BooleanFeature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Boolean builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createBooleanBuilderUsingCollector(BooleanFeature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Boolean builder.
- createBooleanCondition(Property, boolean, Condition.OperatorOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createBorders() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the flag that indicates if borders are created.
- createBorders() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the flag that indicates if borders are created.
- createBorders() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- createBorders() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the create borders
License requirements: None.
- createBordersAndZonesBuilder(BordersAndZones) - Method in interface nxopen.drawings.BordersAndZonesCollection
-
Creates a borders and zones builder
License requirements: drafting ("DRAFTING")
.
- createBoss(double[], double[], String, String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createBottomBubblesToggle() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the status to create bottom bubbles of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createBoundary(int, Tag, UFBound.Tolerance, int, UFBound.Object[]) - Method in interface nxopen.uf.UFBound
-
- createBoundaryCurve() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Creates boundary curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- createBoundaryMemberSet() - Method in interface nxopen.cam.BoundarySet
-
Create an empty boundary member set
License requirements: cam_base ("CAM BASE")
.
- createBoundaryMemberSetPlanarMill() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Create an empty custom member data set for a planar mill/surface contour boundary
License requirements: cam_base ("CAM BASE")
.
- createBoundaryMillingMemberSet() - Method in interface nxopen.cam.BoundaryMillingSet
-
Create an empty custom member data set for a milling boundary
License requirements: cam_base ("CAM BASE")
.
- createBoundaryMillingSet() - Method in interface nxopen.cam.Boundary
-
Create an empty milling boundary set
License requirements: cam_base ("CAM BASE")
.
- createBoundarySet() - Method in interface nxopen.cam.Boundary
-
Create an empty boundary set
License requirements: cam_base ("CAM BASE")
.
- createBoundarySetPlanarMill() - Method in interface nxopen.cam.Boundary
-
Create an empty boundary set for planar mill/surface contour operation
License requirements: cam_base ("CAM BASE")
.
- createBoundaryTurnSet() - Method in interface nxopen.cam.Boundary
-
Create an empty turning boundary set
License requirements: cam_base ("CAM BASE")
.
- createBoundBox() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Create bound box.
- createBoundBox() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Creates the bounding box.
- createBoundedPlaneBuilder(BoundedPlane) - Method in interface nxopen.features.FeatureCollection
-
Creates a
BoundedPlaneBuilder
License requirements: nx_freeform_1 ("basic freeform modeling")
Created in NX6.0.0
- createBoundingObjectBuilder() - Method in interface nxopen.Part
-
- createBox() - Method in interface nxopen.tooling.ToolingManager
-
Returns the CreateBoxCollection instance belonging to this part .
- createBoxBoundingVolumeRecipe(String, CoordinateSystem, Expression, Expression, Expression, CaeSetGroupFilterType[]) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Create a Bounding Volume Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createBoxBoundingVolumeRecipe(String, Point, Point, CaeSetGroupFilterType[]) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Create a Bounding Volume Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- CreateBoxBuilder - Interface in nxopen.tooling
-
- createBoxBuilder(NXObject) - Method in interface nxopen.tooling.CreateBoxCollection
-
Creates a
CreateBoxBuilder
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX8.0.0
- CreateBoxBuilder.BoxType - Class in nxopen.tooling
-
the type for creating box
- CreateBoxCollection - Interface in nxopen.tooling
-
Creates CreateBoxBuilder collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- createBoxSearchTerm(SearchTerm.SearchTermLogicType, BoxSearchTerm.BoxOverlapLogicType, Point3d, Point3d, boolean) - Method in interface nxopen.assemblies.SubsetRecipe
-
Creates a
BoxSearchTerm
and
adds it to the recipe at the end of the list of search terms.
- createBoxSearchTermBuilder(BoxSearchTerm) - Method in interface nxopen.assemblies.SubsetCollection
-
- createBoxZone(Tag, String, double[], double[], double[], Tag) - Method in interface nxopen.uf.UFFltr
-
- createBplane(UFModl.StringList, double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createBracketBuilder(Bracket) - Method in interface nxopen.features.ShipCollection
-
Creates a
BracketBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX11.0.0
- createBranchPathNumberingBuilder() - Method in interface nxopen.routing.RouteManager
-
- createBreakCornerFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Break Corner feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createBreakingConstraintBuilder(BreakingConstraint) - Method in interface nxopen.mechatronics.BreakingConstraintCollection
-
- createBreakout(Tag, UFDraw.BreakoutData) - Method in interface nxopen.uf.UFDraw
-
- createBreakRegion(Tag, Tag, int, UFDraw.BreakRegionBoundary[]) - Method in interface nxopen.uf.UFDraw
-
- createBreaks() - Method in interface nxopen.annotations.BreakSettingsBuilder
-
Returns the create breaks option
License requirements: None.
- createBreakTemplateBuilder(Part, AMEEngObject) - Method in interface nxopen.ame.AMEManager
-
Creates a
BreakTemplateBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createBridgeCurve(int, Tag[], double[], int[]) - Method in interface nxopen.uf.UFCurve
-
- createBridgeCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createBridgeCurveBuilderEx(BridgeCurve) - Method in interface nxopen.features.FeatureCollection
-
Creates a
BridgeCurveBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
Created in NX8.5.0
- createBridgeFace(int, int, Tag[], Tag[], int, UFModl.StringList, UFModl.StringList, Tag[], Tag[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createBridgeFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
BridgeFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
- createBridgeFeature(UFCurve.BridgeData) - Method in interface nxopen.uf.UFCurve
-
- createBridgeSurfaceBuilder(BridgeSurface) - Method in interface nxopen.features.FeatureCollection
-
Creates a
BridgeSurfaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
- createBridgeTransitionBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
BridgeTransitionBuilder
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
Created in NX5.0.2
- createBriefcase(String, String) - Method in interface nxopen.issue.IssueManager
-
- createBrokenViewBuilder(ViewBreak) - Method in interface nxopen.drawings.DraftingViewCollection
-
Creates a
BrokenViewBuilder
License requirements: drafting ("DRAFTING")
Created in NX7.5.0
- createBsEdges(int, int, int, int, double[], double[], double[]) - Method in interface nxopen.uf.UFModlGeneral
-
- CreateBsEdgesData() - Constructor for class nxopen.uf.UFModlGeneral.CreateBsEdgesData
-
- createBsurf(int, int, int, int, double[], double[], double[]) - Method in interface nxopen.uf.UFModlGeneral
-
- createBsurface(UFModl.Bsurface) - Method in interface nxopen.uf.UFModlGeneral
-
- CreateBsurfaceData() - Constructor for class nxopen.uf.UFModlGeneral.CreateBsurfaceData
-
- CreateBsurfData() - Constructor for class nxopen.uf.UFModlGeneral.CreateBsurfData
-
- createBsurfThruPts(int, int, int, int, int, int, UFModl.BsurfRowInfo[]) - Method in interface nxopen.uf.UFModlGeneral
-
- createBuilder() - Method in interface nxopen.assemblies.RelinkerCollection
-
Creates a Relinker builder
License requirements: wave ("WAVE FUNCTIONALITY")
.
- createBuilder(AdaptivityMetaSolution) - Method in interface nxopen.cae.AdaptivityMetaSolutionCollection
-
Creates the builder object of adaptivity meta solution.
- createBuilder(AtvSet) - Method in interface nxopen.cae.AtvSetCollection
-
Creates an atvset builder.
- createBuilder(TaggedObject) - Method in interface nxopen.cae.CfdAutoRefinementConstraintCollection
-
Creates an automatic refinement constraint builder
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- createBuilder(TaggedObject) - Method in interface nxopen.cae.CfdContactPreventionConstraintCollection
-
Creates a local resolution constraint builder
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- createBuilder(TaggedObject) - Method in interface nxopen.cae.CfdLocalResolutionConstraintCollection
-
Creates a local resolution constraint builder
License requirements: nx_adv_fld_mod_solv ("NX Advanced Fluid Modeling - Full") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- createBuilder(String, NXObject) - Method in interface nxopen.cae.DataProcessingBlockCollection
-
Creates the builder object of the DPM Block.
- createBuilder(DataProcessing) - Method in interface nxopen.cae.DataProcessingCollection
-
Creates the builder object of DPM meta solution.
- createBuilder(FluidDomainRecipe) - Method in interface nxopen.cae.FluidDomainCollection
-
Creates a fluid domain recipe builder
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic") OR sc_acou_meshing (" SC Acoustic Meshing")
.
- createBuilder(FrfSet) - Method in interface nxopen.cae.FrfSetCollection
-
Creates an atvset builder.
- createBuilder(MeshControl) - Method in interface nxopen.cae.MeshControlCollection
-
Creates a mesh control builder for the mesh control object
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createBuilder() - Method in interface nxopen.cae.MeshControlDisplayManager
-
Creates a builder for node element info command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createBuilder(ModeSet) - Method in interface nxopen.cae.ModeSetCollection
-
Creates a modeset builder.
- createBuilder(CaePart) - Method in interface nxopen.cae.PostProcessingSession
-
- createBuilder() - Method in interface nxopen.geometricutilities.LocalUntrimManager
-
Creates local untrim and extend builder.
- createBuilder(NXObject) - Method in interface nxopen.mechatronics.ProxyOverrideObjectCollection
-
- createBuilder(Line, Line, double, Point3d, Point3d, boolean, boolean) - Method in interface nxopen.routing.GapDisplayBuilder
-
Takes selected line, gap start and end points, and gap
type settings in to initialise builder data.
- createBuilder(AddReusableFeatureCollection.InputData) - Method in interface nxopen.tooling.AddReusableFeatureCollection
-
Creates a AddReusableFeature builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.AddReusablePartCollection
-
Creates a AddReusablePart builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.AssignPatchCollection
-
Creates a AssignPatch builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.CalculateAreaCollection
-
Creates a CalculateArea builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.EdgePatchCollection
-
Creates a EdgePatch builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.FastenerAssemConfigCollection
-
Creates a FastenerAssemConfig builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.FastenerAssyCollection
-
Creates a FastenerAssy builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.FastenerAssyCustomizationCollection
-
Creates a FastenerAssyCustomization builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.GuidedExtensionManager
-
Creates a GuidedExtension builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.InitProjectCollection
-
Creates a InitProject builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.ManufacturingGeometryCollection
-
Creates a ManufacturingGeometry builder.
- createBuilder() - Method in interface nxopen.tooling.MWCopySheetsCollection
-
Creates a MWCopySheets builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.MWDefineRegionsCollection
-
Creates a MWDefineRegions builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.MWDefineSheetsCollection
-
Creates a MWDefineSheets builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.MWDesignGuideLinesCollection
-
Creates a MWDesignGuideLines builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.MWDesignPartingSurfaceCollection
-
Creates a MWDesignPartingSurface builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.MWPartingManagerCollection
-
Creates a MWPartingManager builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.MWSearchRegionCollection
-
Creates a MWSearchRegion builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.MWTraversePartingLinesCollection
-
Creates a MWTraversePartingLines builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.SolidPatchCollection
-
Creates a SolidPatch builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.SpecifyBaffleCollection
-
Creates a SpecifyBaffle builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.SpecifyCircuitCollection
-
Creates a SpecifyCircuit builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.TraverseLoopCollection
-
Creates a TraverseLoop builder
License requirements: None.
- createBuilder() - Method in interface nxopen.tooling.WallThicknessCheckerManager
-
Creates a WallThicknessChecker builder
License requirements: None.
- createBuilderByPartingOrPatchType() - Method in interface nxopen.tooling.AssignPatchCollection
-
Creates a AssignPatch builder for use in NX11 and later releases
License requirements: None.
- createBuildTray(Part) - Method in interface nxopen.mfg.am.ApplicationManager
-
Creates a build tray in a file
License requirements: am_pb_cam_basic ("Basic NX Powder Bed Additive Manufacturing Application")
.
- createBuiltInPath(Curve[]) - Method in interface nxopen.routing.BuiltInPathCollection
-
- createBuiltInPath(Tag, int, Tag[], String) - Method in interface nxopen.uf.UFRoute
-
- createBuiltUpManModeBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
BuiltUpManModeBuilder
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX9.0.0
- createBulkConnectionBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
BulkConnectionBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createBulkEditBuilder() - Method in interface nxopen.diagramming.DiagrammingManager
-
- createBulkEditBuilder(Part) - Method in interface nxopen.pid.PidManager
-
Creates a
BulkEditBuilder
License requirements: nx_pid_design_author ("NX P and ID Design Author")
Created in NX11.0.1
- createBulkEngineeringObjectBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createBulkheadListItem(BulkHeadsBuilder.BulkheadType) - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder
-
Create a list to generate a single bulkHead.
- createBulkHeadsBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
BulkHeadsBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
- createBulkReplacementBuilder(Part, Component, NXObject[]) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createBumperPendulumBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createBumperPendulumBuilder(BumperPendulum) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
BumperPendulumBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createBurringInsertBuilder() - Method in interface nxopen.tooling.BurringInsertCollection
-
Creates burring insert builder.
- createBushingBuilder(Bushing) - Method in interface nxopen.motion.BushingCollection
-
Return
BushingBuilder
object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createBushingEadBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Bushing EAD block.
- createBushingEadBuilder(FEElement) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Bushing EAD block and initializes it with the input element if defined.
- createByPartsFilter(PmiFilter.ComponentMethod, Component[]) - Method in interface nxopen.annotations.PmiFilterCollection
-
Creates a PMI filter defined by a set of components
License requirements: geometric_tol ("GDT")
.
- createByTypesFilter(PmiFilter.ComponentMethod, Component[], PmiFilterByType.Type[]) - Method in interface nxopen.annotations.PmiFilterCollection
-
Creates a PMI filter defines by a set of PMI types.
- createByViewsFilter(PmiFilter.ComponentMethod, Component[], String[]) - Method in interface nxopen.annotations.PmiFilterCollection
-
Creates a PMI filter defined by a set of model views.
- createCabinetDesignBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
CabinetDesignBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createCableConnection() - Method in interface nxopen.routing.electrical.CableConnectionCollection
-
- createCablewaysBuilder() - Method in interface nxopen.routing.RouteManager
-
- createCablewaysLayoutBuilder() - Method in interface nxopen.routing.RouteManager
-
- createCaeNoteBuilder(SimpleDraftingAid) - Method in interface nxopen.cae.NoteManager
-
Creates a builder for cae annotation command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCaeRegion(String, String, int) - Method in interface nxopen.cae.CaeRegionCollection
-
Creates a
CaeRegion
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.0.0
- createCaeRegionBuilder(String, CaeRegion) - Method in interface nxopen.cae.SimSimulation
-
Creates a
CaeRegionBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX7.0.0
- createCaeSet() - Method in interface nxopen.cae.SetManager
-
Creates a CAE.CAESet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- createCagePolylineBuilder(Polyline) - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createCallback(UserDefinedFeatureCreateEvent) - Method in interface nxopen.features.UserDefinedFeatureClass.CreateCallback
-
Prototype for create callbacks
License requirements: None.
- createCallMethodRuleBuilder(Part, PlcCodePosition, PlcBlock, PlcRule.Type, PlcRule.RefObjectType, PlcRule.ReplacementType, int, int, int) - Method in interface nxopen.ame.AMEManager
-
Creates a
CallMethodRuleBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createCalloutGroupBuilder() - Method in interface nxopen.annotations.IdSymbolCollection
-
- createCamBuilder(Cam) - Method in interface nxopen.mechatronics.CamCollection
-
- createCamDisk() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the toggle of create cam disk.
- createCameraBuilder(Camera) - Method in interface nxopen.display.CameraCollection
-
- createCameraBuilder(Camera, boolean) - Method in interface nxopen.display.CameraCollection
-
- createCameraBuilder(View, Layout, Camera) - Method in interface nxopen.display.CameraCollection
-
- createCameraBuilder(View, Layout, Camera, boolean) - Method in interface nxopen.display.CameraCollection
-
- createCameraListItemBuilder() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
- createCamPreferences() - Method in interface nxopen.cam.CAMSession
-
Create Cam Preferences builder.
- createCamProfileBuilder(CamProfile) - Method in interface nxopen.mechatronics.CamProfileCollection
-
- createCamSession() - Method in interface nxopen.Session
-
Create the CAM session
License requirements: None.
- createCamSetup(String) - Method in interface nxopen.Part
-
Creates CAM setup
License requirements: cam_base ("CAM BASE")
.
- createCannedAnnotationBuilder(Annotation) - Method in interface nxopen.diagramming.DiagrammingManager
-
- createCarCsys(Point3d, Matrix3x3) - Method in interface nxopen.HumanPosturePredictionBuilder
-
Create the Car Coordinate System, only one Car Coordinate System is allowed in a part or an assembly
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- createCargo(TaggedObject[], double) - Method in interface nxopen.shipdesign.Generator
-
Creates the ship cargo body based on the input boundary sheets.
- createCategory(String, String, int[]) - Method in interface nxopen.layer.CategoryCollection
-
Creates a new layer category
License requirements: None.
- createCategory(UFLayer.CategoryInfo) - Method in interface nxopen.uf.UFLayer
-
- createCatiav4Creator() - Method in interface nxopen.DexManager
-
Create the Catiav4Creator
License requirements: None.
- createCatiav4Importer() - Method in interface nxopen.DexManager
-
Create the Catiav4Importer
License requirements: None.
- createCatiav5Creator() - Method in interface nxopen.DexManager
-
Create the Catiav5Creator
License requirements: None.
- createCatiav5Importer() - Method in interface nxopen.DexManager
-
Create the Catiav5Importer
License requirements: None.
- createCavityMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a planar milling cavity operation builder
License requirements: cam_base ("CAM BASE")
.
- createCBoreHole(double[], double[], String, String, String, String, String, Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createCdf() - Method in interface nxopen.CGMBuilder
-
Creates and returns a
CDF
object representing the Color Palette.
- createCdf() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Creates and returns a
CDF
object representing the Color Palette.
- createCdf() - Method in interface nxopen.PrintPDFBuilder
-
Creates and returns a
CDF
object representing the Color Palette.
- createCellBuilder(DisplayableObject, boolean, int, String, String, boolean) - Method in interface nxopen.annotations.TitleBlockCollection
-
Creates a cell builder
License requirements: None.
- createCellData() - Method in interface nxopen.SpreadsheetManager
-
Creates SpreadsheetCellData object.
- createCenterLine() - Method in interface nxopen.weld.WeldPointBuilder
-
To create center line
License requirements: ugweld ("UG WELD")
.
- createCenterline2dBuilder(Centerline2d) - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the 2D Centerline builder
License requirements: None.
- createCenterline3dBuilder(Centerline3d) - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the 3D Centerline builder
License requirements: None.
- createCenterlineDrillTurningBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a centerline drill turning operation builder
License requirements: cam_base ("CAM BASE")
.
- createCenterMarkBuilder(CenterMark) - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the CenterMark Builder
License requirements: None.
- createCgfxMattexBuilder(TaggedObject) - Method in interface nxopen.display.CgfxMattexCollection
-
- createCgmBuilder() - Method in interface nxopen.PlotManager
-
Create the CGMBuilder
License requirements: None.
- createCgmImporter() - Method in interface nxopen.ImportManager
-
Creates a CGM importer object.
- createChainJointBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createChamfer(int, String, String, String, Tag[]) - Method in interface nxopen.uf.UFModeling
-
- createChamferBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Chamfer feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createChamferDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createChamferDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a chamfer dimension
License requirements: drafting ("DRAFTING")
.
- createChamferDimensionBuilder(BaseChamferDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createChamferMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a Chamfer Milling operation builder
License requirements: cam_base ("CAM BASE")
.
- createChangeMaterialBuilder(ChangeMaterial) - Method in interface nxopen.mechatronics.ChangeMaterialCollection
-
- createChangeoverManagementBuilder() - Method in interface nxopen.tooling.WorkflowManagementCollection
-
Creates changeover management builder.
- createChangeOwnerBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createChangeShellThicknessBuilder(ChangeShellThickness) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ChangeShellThicknessBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createChannelAdjustBuilder() - Method in interface nxopen.tooling.ChannelAdjustCollection
-
Creates a Tooling.ChannelAdjustBuilder
License requirements: None.
- createChannelConfigurationBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a kinematic channel configurator
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createChannelFittingBuilder() - Method in interface nxopen.tooling.ChannelFittingCollection
-
Creates a Tooling.ChannelFittingBuilder
License requirements: None.
- createCharacteristicsBuilder(NXObject, int) - Method in interface nxopen.weld.WeldManager
-
- createCharacteristicsBuilder(NXObject, CharacteristicsBuilder.Type) - Method in interface nxopen.weld.WeldManager
-
- createCheckingBuilder() - Method in interface nxopen.tooling.ElectrodeDesignCollection
-
Creates electrode checking builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- createChild() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Creates a child Flange Steel Rib.
- createChild() - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Creates a child handling core.
- createChild() - Method in interface nxopen.die.HoleParentBuilder
-
Creates a child hole.
- createChild() - Method in interface nxopen.die.KeywayParentBuilder
-
Creates a child keyway.
- createChild() - Method in interface nxopen.die.PadParentBuilder
-
Creates a child pad.
- createChild() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Creates a child pierce hole
License requirements: ug_die_design ("Die Design")
.
- createChild() - Method in interface nxopen.die.PointParentBuilder
-
Creates a child point.
- createChild() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Creates a child pressure system.
- createChild() - Method in interface nxopen.die.RibParentBuilder
-
Creates a child rib.
- createChild() - Method in interface nxopen.die.SteelInsertSegmentParentBuilder
-
Creates a child siseg
License requirements: ug_die_design ("Die Design")
.
- createChild() - Method in interface nxopen.die.ThroatParentBuilder
-
Creates a child throat section.
- createChild() - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Creates a child wear plate and locator
License requirements: ug_die_design ("Die Design")
.
- createChild(NXObject, ManufacturingAssemblyNavigatorBuilder.ContainerType) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Create a child container
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- createChildrenEvaluatorBuilder(Part, ExpressionEvaluator) - Method in interface nxopen.ame.AMEManager
-
Creates a
ChildrenEvaluatorBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createChildRule(String, String, RuleManager.ParameterRule[]) - Method in interface nxopen.RuleManager
-
Create a child rule and the root for this rule manager's part.
- createChildRule(Tag, String, String, String, int, String[], String[]) - Method in interface nxopen.uf.UFKf
-
- createCircle(Point2d, double) - Method in interface nxopen.markup.MarkupFileObjectCollection
-
Creates a
Circle
License requirements: None.
- createCircularAboutAxisMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Circular Move.
- createCircularBlendCurveBuilder(CircularBlendCurve) - Method in interface nxopen.features.FeatureCollection
-
- createCircularCenterlineBuilder(CircularCenterline) - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the CircularCenterline builder
License requirements: None.
- createCircularEdgeMethod(CAEEdge[], double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
- createCircularEdgeMethod(CAEEdge[], boolean, double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a circular edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCircularEdgeMethod(CAEFace, double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
- createCircularEdgeMethod(CAEFace[], double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
- createCircularEdgeMethod(CAEFace[], boolean, double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a circular edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCircularEdgeMethod(CAEBody, double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
- createCircularEdgeMethod(CAEBody[], double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
- createCircularEdgeMethod(CAEBody[], boolean, double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a circular edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCircularImprintBuilder() - Method in interface nxopen.cae.AbstractionManager
-
Creates a builder for abstraction Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCircularIset(int, double[], double[], String, String, Tag[]) - Method in interface nxopen.uf.UFModlGeneral
-
- createCircularMotion(UFVariant, UFPath.CircularMotion) - Method in interface nxopen.uf.UFPath
-
- createCircularOffsetPath(ISegment[], boolean, Stock[], boolean, boolean, OffsetPathCollection.BendType, boolean, double, double, boolean, boolean, Vector3d, Vector3d, Point3d, double, double, int, double) - Method in interface nxopen.routing.OffsetPathCollection
-
Creates a circular offset path.
- CreateCircularOffsetPathData() - Constructor for class nxopen.routing.OffsetPathCollection.CreateCircularOffsetPathData
-
- createCircularPatternFace(UFModl.DfoRegion, Tag, int, String) - Method in interface nxopen.uf.UFModlFeatures
-
- createCircularTarget(CircularTargetData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a PMI circular target
License requirements: geometric_tol ("GDT")
.
- createClamp(UFVariant, UFPath.ClampStatus, UFPath.Axis, String) - Method in interface nxopen.uf.UFPath
-
- createClass(String) - Method in interface nxopen.features.UserDefinedFeatureClassManager
-
- createCleanupFacetBodyBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
- createCleanUpUtilityBuilder() - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
CleanUpUtilityBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX7.5.0
- createClearanceAnalysisBuilder(ClearanceSet) - Method in interface nxopen.assemblies.AssemblyManager
-
- createClearanceBuilder(Clearance) - Method in interface nxopen.die.DieCollection
-
- createClearanceManagementBuilder() - Method in interface nxopen.tooling.ClearanceManagementCollection
-
Creates burring insert builder.
- createClearanceZoneExpression(String) - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Create an expression using the Clearance Zone naming convention.
- createClippingBoxesListItemBuilder() - Method in interface nxopen.display.PointCloudBuilder
-
- createClippingParameters() - Method in interface nxopen.cae.ResultManager
-
Creates a clipping parameter object.
- createClockingBuilder(int, int) - Method in interface nxopen.geometricutilities.PatternDefinition
-
Creates a pattern clocking object
License requirements: None.
- createClockPartBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
-
- createCloneObject(ToolingApplication, String) - Method in interface nxopen.tooling.AddReusablePart
-
Creates the clone operation object
License requirements: None.
- createCloneObject(int, int, String, String, String) - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Creates clone object.
- createCloneObject() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Creates clone object.
- createCloneObject(ToolingApplication, ToolingCloneaction) - Method in interface nxopen.tooling.ToolingSession
-
Creates the clone operation object
License requirements: None.
- createCloneObjectOfMsetPart() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Creates clone object of machine set part.
- createCloneObjectOfTopPart() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Creates clone object of top part.
- createCloneObjectOfWorkingPart() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Creates clone object of working part.
- createClonePartItem(String) - Method in interface nxopen.tooling.CloneObject
-
Creates a new clone part item.
- createClosedCornerFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Closed Corner feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createCloseRangeVisibilityBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createCloseRangeVisibilityBuilder(CloseRangeVisibility) - Method in interface nxopen.features.VehicleDesignCollection
-
- createCoaxialBuilder(Coaxial) - Method in interface nxopen.features.FeatureCollection
-
Creates a
CoaxialBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createCoincidentConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a coincident constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createCollaborativeDesign(Part) - Method in interface nxopen.ame.ApplicationBuilder
-
Create a CD for workset part.
- createCollaborativeDesign(Part, String) - Method in interface nxopen.ame.ApplicationBuilder
-
Create a CD for workset part with predefined ID
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createCollarPlateBuilder(CollarPlate) - Method in interface nxopen.features.ShipCollection
-
Creates a
CollarPlateBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX11.0.0
- createCollector() - Method in interface nxopen.cae.ElementCreateBuilder
-
Create mesh collector
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCollector() - Method in interface nxopen.FacetCollectorCollection
-
Create a facet collector.
- createCollector() - Method in interface nxopen.ScCollectorCollection
-
Create a sc collector.
- createCollectorBuilder(MeshCollector, String) - Method in interface nxopen.cae.MeshManager
-
Creates a mesh collector builder for the mesh collector object
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCollinearConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a collinear constraint.
- createCollisionBodyBuilder(CollisionBody) - Method in interface nxopen.mechatronics.CollisionBodyCollection
-
- createCollisionMaterialBuilder(CollisionMaterial) - Method in interface nxopen.mechatronics.CollisionMaterialCollection
-
- createCollisionPairBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a collision pair builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createCollisionSensorBuilder(CollisionSensor) - Method in interface nxopen.mechatronics.CollisionSensorCollection
-
- createColorExpressionsBuilder() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates Color Expressions builder.
- createColorFaceBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createColorFeatureBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createColorFeatureGroupBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createColumn(double, UFPlist.ColPrefs, UFPlist.ColumnType) - Method in interface nxopen.uf.UFPlist
-
- createColumn(double) - Method in interface nxopen.uf.UFTabnot
-
- createComacViewerBuilder() - Method in interface nxopen.cae.CorrelSolutionCollection
-
Creates the builder object of correl comac matrix viewer
License requirements: nx_correl_base ("FE Correlation")
.
- createCombineCurves(Tag, UFCurve.CombineCurvesDirection, Tag, UFCurve.CombineCurvesDirection, String) - Method in interface nxopen.uf.UFCurve
-
- createCombinedLoadCase(String, int, Tag[], double[]) - Method in interface nxopen.uf.UFSf
-
- createCombinedProjectionBuilder(CombinedProjection) - Method in interface nxopen.features.FeatureCollection
-
- createCombineFacetBodyBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
- createCombineSheetsBuilder(CombineSheets) - Method in interface nxopen.features.TrimFeatureCollection
-
Creates a
CombineSheetsBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX11.0.1
- createCombineTrisBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for Combine Tris.
- createCommandBuilder(CommandLibrary, Command) - Method in interface nxopen.report.CommandManager
-
Creates the command builder.
- createCompanionResultBuilder(CompanionResult) - Method in interface nxopen.cae.CompanionResultCollection
-
Creates a
CompanionResultBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX7.5.0
- createCompanyProprietaryInformationBuilder(CompanyProprietaryInformation) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createCompareModeBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
CompareModeBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createCompareReportBuilder() - Method in interface nxopen.DrawingCompareManager
-
- createCompareReportBuilder(String, boolean) - Method in interface nxopen.DrawingCompareManager
-
- createCompareRunsBuilder(Run) - Method in interface nxopen.routing.RouteManager
-
Creates a
CompareRunsBuilder
to compare runs in the working part
to another part or an xml definition.
- createCompDrawing(NXObject, String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
- createComplexMatrixRecord(String, String) - Method in interface nxopen.cae.ftk.DataManager
-
Creates an empty complex matrix record which section data is complex data.
- createComplexScalarFieldWrapperWithExpressions(Expression[]) - Method in interface nxopen.fields.FieldManager
-
Create a complex scalar field wrapper backed by two scalar expressions
License requirements: None.
- createComplexScalarFieldWrapperWithField(Field) - Method in interface nxopen.fields.FieldManager
-
Create a complex scalar field wrapper backed up by a complex scalar field
License requirements: None.
- createComplexScalarFieldWrapperWithFieldWithScaleFactor(Field, double) - Method in interface nxopen.fields.FieldManager
-
Create a complex scalar field wrapper backed up by a complex scalar field with scale factor
License requirements: None.
- createComplexVectorFieldWrapperWithExpressions(Expression[]) - Method in interface nxopen.fields.FieldManager
-
Create a complex vector field wrapper backed by six scalar expressions
License requirements: None.
- createComplexVectorFieldWrapperWithField(Field, double) - Method in interface nxopen.fields.FieldManager
-
Create a complex vector field wrapper backed up by a complex vector field
License requirements: None.
- CreateComponentBuilder - Interface in nxopen.assemblies
-
- createComponentBuilder(KinematicComponent, KinematicComponent) - Method in interface nxopen.sim.KinematicComponentCollection
-
Creates a builder for a kinematic component
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- createComponentBuilder() - Method in interface nxopen.tooling.ElectrodeDesignCollection
-
Creates EW component builder
License requirements: None.
- createComponentData(Annotation) - Method in interface nxopen.annotations.AnnotationManager
-
- createComponentDrawingBuilder() - Method in interface nxopen.tooling.ToolingDrawingCollection
-
Creates create component drawing builder
License requirements: None.
- createComponentDrawingCopyAttribute(NXObject, String, String, String, String, String[], String[]) - Method in interface nxopen.tooling.CompDrawingBuilder
-
Creates a drawing for a component and copy attribute to the drawing part
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createComponentFrom3dBuilder(View) - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
CreateComponentFrom3DBuilder
that can create assembly from
the selected layout
License requirements: nx_layout ("NX Layout")
Created in NX11.0.0
- CreateComponentFrom3DBuilder - Interface in nxopen.layout2d
-
- CreateComponentFrom3DBuilder.CreateMethod - Class in nxopen.layout2d
-
the method to use
- CreateComponentFrom3DBuilder.ProjectionPlaneData - Class in nxopen.layout2d
-
- createComponentFrom3DSettingsBuilder() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the create component from 3d builder
License requirements: None.
- CreateComponentFrom3DSettingsBuilder - Interface in nxopen.layout2d
-
- createComponentGroup(String) - Method in interface nxopen.assemblies.ComponentGroupCollection
-
Creates a
ComponentGroup
with the given name
License requirements: adv_assemblies ("ADVANCED ASSEMBLIES")
Created in NX7.5.0
- createComponentPart(Tag, String, String, String, int, int, double[], double[], int, Tag[]) - Method in interface nxopen.uf.UFAssem
-
- createComponentPart(Tag, String, String, String, int, int, double[], double[], int, Tag[], String) - Method in interface nxopen.uf.UFUgmgr
-
- createComponentPattern(NXObject, NXObject) - Method in interface nxopen.tooling.ToolingSession
-
Create component pattern
License requirements: None.
- createComponentPatternBuilder(ComponentPattern) - Method in interface nxopen.assemblies.ComponentAssembly
-
- createComponents(int, NXObject) - Method in interface nxopen.tooling.AddReusablePart
-
Creates an array instance of a component
License requirements: None.
- createCompositeCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
CompositeCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX5.0.0
- createCompoundDatumReferenceBuilder() - Method in interface nxopen.annotations.AnnotationManager
-
Creates a new compound datum dialog
License requirements: geometric_tol ("GDT")
.
- createCompoundWeldBuilder(CompoundWeld) - Method in interface nxopen.weld.WeldManager
-
- createConcaveFacesBuilder(ConcaveFaces) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ConcaveFacesBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.0
- createConcentricCircleDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a concentric circle dimension
License requirements: drafting ("DRAFTING")
.
- createConcentricConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a concentric constraint.
- createConcept() - Method in interface nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder
-
Returns the toggle to control creating concept part
License requirements: None.
- createConceptFromSpreadsheetBuilder(ConceptFromSpreadsheet) - Method in interface nxopen.features.ShipCollection
-
- createConceptPositionBuilder() - Method in interface nxopen.tooling.ConceptPositionCollection
-
Creates a ConceptPosition builder
License requirements: None.
- createConcirDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createConcurrentDesignManagementBuilder() - Method in interface nxopen.tooling.WorkflowManagementCollection
-
Create Concurrent Design Management builder.
- createCone(UFModl.FeatureSigns, Tag, double[], String, String[], double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createCone1(UFModl.FeatureSigns, double[], String, String[], double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createConeBuilder(Cone) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ConeBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createConesForDatumByDirection(TaggedObject, SelectDatumsBuilder.ConesDir) - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
The create cones for datum by direction
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- createConfigurationContextBuilder() - Method in interface nxopen.pdm.ConfigurationManager
-
- createConfigureResultTableBuilder(AMEQuery) - Method in interface nxopen.ame.AMEManager
-
- createConflictResolutionBuilder(SimGroupContainer, SimBC, SimBC) - Method in interface nxopen.cae.SimSolution
-
Creates a conflict resolution builder for this input pair of BCs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createConic(UFCurve.Conic) - Method in interface nxopen.uf.UFCurve
-
- createConnectBuilder(Part, Component[]) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createConnectedCurvesBuilder() - Method in interface nxopen.routing.RouteManager
-
- createConnectedFaceFinderBuilder(Feature[]) - Method in interface nxopen.weld.WeldManager
-
Creates a builder for running the Connected Face Finder utility.
- createConnectedFaceFinderOperation() - Method in interface nxopen.weld.WeldManager
-
Creates a builder for running the Connected Face Finder utility.
- createConnectedObjectsEvaluatorBuilder(Part, ExpressionEvaluator) - Method in interface nxopen.ame.AMEManager
-
- createConnection(Sheet, AMEExtendedObject, AMEExtendedObject, Point2d[]) - Method in interface nxopen.ame.DiagramManager
-
Create Diagramming Connection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createConnection(ConnectionType, String) - Method in interface nxopen.cae.connections.Folder
-
Create a
IConnection
in this folder of the specified type with the specified name
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- createConnectionBuilder(CAEConnection) - Method in interface nxopen.cae.CAEConnectionCollection
-
Creates a builder for Connection Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createConnectionBuilder(Connection) - Method in interface nxopen.diagramming.ConnectionCollection
-
- createConnectionBuilder(SignalMappingConnection) - Method in interface nxopen.mechatronics.SignalMappingConnectionCollection
-
- createConnectionPoint(NXObject) - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Creates a new connection point
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createConnectionPostPlacementUdo(ReuseLibrary.PartType, int, ReuseLibrary.ReportInBom, CharacteristicList, PortConnection[]) - Method in interface nxopen.routing.RouteManager
-
Creates a user defined object (UDO) linked to one or two connections.
- createConnections(NXObject) - Method in interface nxopen.ame.PortsManagerBuilder
-
Creates the connections
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createConnectorDevice(ConnectorDevice.ComponentType, String) - Method in interface nxopen.routing.electrical.ConnectorDeviceCollection
-
- createConnectorDevice(HarnessDevice, String, String, ConnectorDevice.ComponentType) - Method in interface nxopen.routing.electrical.ConnectorDeviceCollection
-
Finds or Creates a
ConnectorDevice
for given equipmentName and or
connectorName.
- createConnectPathBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
ConnectPathBuilder
which connects path
License requirements: routing_base ("Routing Basic")
Created in NX6.0.2
- createConstantAngleConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a constant angle constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createConstantLengthConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a constant length constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createConstrainedIsetArray(UFAssem.IsetArrayData) - Method in interface nxopen.uf.UFAssem
-
- createConstrainedSegment(ControlPoint, ControlPoint) - Method in interface nxopen.routing.SegmentManager
-
- createConstraint(String, String) - Method in interface nxopen.cae.SimConstraintCollection
-
Creates a Constraint for the constraint descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createConstraint() - Method in interface nxopen.features.DatumBuilder
-
Creates a new empty constraint object.
- createConstraint(boolean) - Method in interface nxopen.positioning.Positioner
-
- createConstraint() - Method in interface nxopen.positioning.Positioner
-
- createConstraintBuilder(DAOConstraint) - Method in interface nxopen.cae.optimization.DAOSolution
-
Creates the builder object of optimization solution design constraint
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createConstraintBuilder(DAOConstraint) - Method in interface nxopen.cae.optimization.DAOSolutionCollection
-
- createConstraintBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchConstraintBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX8.5.0
- createConstraintDisplayBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
- createConstraintGroup() - Method in interface nxopen.cae.SimGroupContainer
-
Creates a constraint group for a solution or solution step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createConstraintGroupBuilder(ComponentConstraintGroup, Component) - Method in interface nxopen.assemblies.ComponentAssembly
-
- createConstraintReference(NXObject, NXObject, boolean, boolean) - Method in interface nxopen.positioning.Constraint
-
Adds geometry to a constraint and sets the movable object
to be constrained.
- createConstraintReference(NXObject, NXObject, boolean, boolean, boolean) - Method in interface nxopen.positioning.Constraint
-
Adds geometry to a constraint and sets the movable object
to be constrained.
- createConstraintResolutionBuilder(SimGroupContainer, SimConstraint, SimConstraint) - Method in interface nxopen.cae.SimSolution
-
- createConstraintSet(String, String, int) - Method in interface nxopen.cae.SimConstraintSetCollection
-
Creates a
SimConstraintSet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX11.0.0
- createConstraintSetBuilder(String, SimConstraintSet) - Method in interface nxopen.cae.SimSimulation
-
Creates a
SimConstraintSetBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX11.0.0
- createConstructionFeatureData(Feature) - Method in interface nxopen.features.CustomFeaturePreUpdateEvent
-
Returns construction feature data for given construction feature of a custom feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createContactMesh(Tag, UFSf.ContactMeshData, UFSf.OrientationData) - Method in interface nxopen.uf.UFSf
-
- createContactMeshBuilder(Mesh1d) - Method in interface nxopen.cae.MeshManager
-
Creates a
ContactMeshBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX10.0.0
- createContainerMoveBuilder(Move, int) - Method in interface nxopen.cam.MoveCollection
-
Creates a container move.
- createContourFlangeFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Contour Flange feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createControlInputBuilder(ControlInput) - Method in interface nxopen.motion.ControlInputCollection
-
Creates a
ControlInputBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX11.0.0
- createControlInputPortBuilder() - Method in interface nxopen.motion.ControlInputBuilder
-
Creates a new control input port item and adds to the PortsList.
- createControlOutputBuilder(ControlOutput) - Method in interface nxopen.motion.ControlOutputCollection
-
- createControlPoint(int, Point, CartesianCoordinateSystem, int, boolean, NXObject, int) - Method in interface nxopen.cam.LaserProfileMove
-
Create a new Laser Control Point
License requirements: cam_base ("CAM BASE")
.
- createControlPoint(Point3d, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
-
- createControlPoint(Port, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
-
- createControlPoint(TaggedObject, double, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
-
Creates a
ControlPoint
at the given object and normalized parameter.
- createControlPoint(Point, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
-
- createControlPoint(IBaseCurve, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
-
- createControlPoint(IRoutePosition, Vector3d, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
-
- createControlPoint(ControlPoint, ControlPointCollection.CheckExisting) - Method in interface nxopen.routing.ControlPointCollection
-
- CreateControlPointData() - Constructor for class nxopen.routing.ControlPointCollection.CreateControlPointData
-
- createConvertDraftingContentsBuilder() - Method in interface nxopen.drawings.ConvertToPMIBuilderManager
-
Creator for Drawing to PMI Builder
License requirements: convert_to_pmi (" Convert To PMI"), drafting ("DRAFTING")
.
- createConvertFacetBodyBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
- createConvertFeatureGroupsToDesignGroupsBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createConvertFeatureGroupsToModulesBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createConvertFromDieValidationBuilder(Part) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
- createConvertFromMcdBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder to convert from MCD
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createConvertFromMtbbuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createConvertInputListItem() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Create a corner list item.
- createConvertLayoutToSheetBuilder() - Method in interface nxopen.layout2d.LayoutDrawingSheetCollection
-
- createConvertSheetToLayoutBuilder() - Method in interface nxopen.layout2d.LayoutDrawingSheetCollection
-
- createConvertToConvergentBodyBuilder() - Method in interface nxopen.cae.CaePart
-
- createConvertToFromReferenceBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
ConvertToFromReferenceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
- createConvertToSheetmetalFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Convert To Sheetmetal feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createConvexMeshBuilder(RecipeConvexMesh) - Method in interface nxopen.cae.NodeElementManager
-
Creates a
ConvexMeshBuilder
License requirements: sc_acou_meshing (" SC Acoustic Meshing")
Created in NX12.0.0
- createConvexMeshBuilder() - Method in interface nxopen.cae.NodeElementManager
-
- createCoolantOff(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createCoolantOn(UFVariant, UFPath.CoolantType, String) - Method in interface nxopen.uf.UFPath
-
- createCoolingConnectBuilder() - Method in interface nxopen.tooling.CoolingConnectCollection
-
Creates a Tooling.CoolingConnectBuilder
License requirements: None.
- createCoolingDefineChannelBuilder() - Method in interface nxopen.tooling.CoolingDefineChannelCollection
-
Creates Tooling.CoolingDefineChannelBuilder
License requirements: None.
- createCoolingExtendBuilder() - Method in interface nxopen.tooling.CoolingExtendCollection
-
Creates a Tooling.CoolingExtendBuilder
License requirements: None.
- createCoolingFittingData() - Method in interface nxopen.tooling.ChannelFittingBuilder
-
Creates the Cooling Fitting Data object.
- createCoolingFittingData() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
Creates the cooling fitting data object.
- createCoolingPatternBuilder() - Method in interface nxopen.tooling.CoolingPatternCollection
-
Creates Tooling.CoolingPatternBuilder
License requirements: None.
- createCoordinateNoteBuilder(CoordinateNote) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createCoordinateRecipe(String, Point3d, double) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Creates a Coordinate based Single Node Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createCoordinateSystem(Point3d, Matrix3x3, boolean) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a new cartesian coordinate system
License requirements: None.
- createCoordinateSystem(Point3d, Vector3d, Vector3d) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a new cartesian coordinate system
License requirements: None.
- createCoordinateSystem(Point3d, NXMatrix, boolean) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a new cartesian coordinate system
License requirements: None.
- createCoordinateSystem(Xform, SmartObject.UpdateOption) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a CartesianCoordinateSystem from a Xform and update option.
- createCopeCornerBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
-
- createCoplanarBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a coplanar builder, don't use it until nx6
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createCopy() - Method in interface nxopen.layout2d.ReparentComponentBuilder
-
Returns the flag to distinguish copy and cut operations
License requirements: None.
- createCopyCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createCopyCageData() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createCopyCutBuilder() - Method in interface nxopen.ClipboardOperationsManager
-
Creates a Copy Cut builder object.
- createCopyDesignElementBuilder(Part) - Method in interface nxopen.CollaborativeContentManager
-
Creates a
CopyDesignElementBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX12.0.0
- createCopyFace() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Creates the extracted face when the flag of Edit a Copy is turned on or a solid body face is selected.
- createCopyFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a copy face builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createCopyInPart(BasePart) - Method in interface nxopen.fields.Field
-
Copy the field to the target part.
- createCopyObjectsBuilder(Component) - Method in interface nxopen.features.ShipCollection
-
Creates a
CopyObjectsBuilder
License requirements: nx_ship_basic ("Ship Basic Design")
Created in NX10.0.0
- createCopyOperationBuilder(PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PdmSession
-
- createCopyPart() - Method in interface nxopen.tooling.IntermediateStageBuilder
-
Returns the switch of whether to create a copy part.
- createCopyPasteBuilder(NXObject[]) - Method in interface nxopen.features.FeatureCollection
-
Creates a
CopyPasteBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createCopyPasteBuilder2(NXObject[]) - Method in interface nxopen.features.FeatureCollection
-
Creates a
CopyPasteBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
- createCopyPasteNewBuilder(Component) - Method in interface nxopen.features.ShipCollection
-
Creates a
CopyPasteNewBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createCopySolidBuilder() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates Copy Solid builder.
- createCopyTo3dBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
- createCorner(ControlPoint, CornerTypeBuilder.BendMethods, double, double) - Method in interface nxopen.routing.BendCornerCollection
-
Create a bend corner object at a Control Point.
- createCorner(ControlPoint, double, int) - Method in interface nxopen.routing.MiteredBendCornerCollection
-
Create a mitered bend corner object at a Control Point.
- createCornerBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchCornerBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
- createCornerByBendRadius(ControlPoint, ControlPoint, double, int) - Method in interface nxopen.routing.SBendCornerCollection
-
Creates a S-Bend corner between the start rcp and end rcp using a
bend radius.
- createCornerByBendRatio(ControlPoint, ControlPoint, double, int) - Method in interface nxopen.routing.SBendCornerCollection
-
Creates a S-Bend corner between the start rcp and end rcp using a
bend ratio.
- createCornerBySegBendRadius(ControlPoint, ControlPoint, SplineSegment, int, double) - Method in interface nxopen.routing.SBendCornerCollection
-
Creates a S-Bend corner between the start rcp and end rcp using a
SplineSegment
and a bend radius.
- createCornerBySegBendRatio(ControlPoint, ControlPoint, SplineSegment, int, double) - Method in interface nxopen.routing.SBendCornerCollection
-
Creates a S-Bend corner between the start rcp and end rcp using a
SplineSegment
and a bend ratio.
- createCornerCutBuilder(CornerCut) - Method in interface nxopen.features.ShipCollection
-
Creates a
CornerCutBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
- createCornerCutListitemBuilder() - Method in interface nxopen.features.ShipCollection
-
- createCornerDesignBuilder() - Method in interface nxopen.tooling.CornerDesignCollection
-
Creates Corner Design builder.
- createCorrelApplyAlignmentFromBuilder(SimSolution) - Method in interface nxopen.cae.CorrelManager
-
- createCorrelFineTuneAlignmentBuilder(SimSolution) - Method in interface nxopen.cae.CorrelManager
-
- createCorrelMethodBuilder() - Method in interface nxopen.cae.ModelUpdateSolution
-
Creates the builder object of model update correlation method
License requirements: nx_correl_update ("FE Model Update")
.
- createCostFeatureDataProvider() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates a data provider for cost feature data.
- createCouplerCableBuilder(CouplerCable) - Method in interface nxopen.motion.CouplerCollection
-
Creates the builder object of
CouplerCable
object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createCouplerGearBuilder(CouplerGear) - Method in interface nxopen.motion.CouplerCollection
-
Creates the builder object of
CouplerGear
object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createCouplerRckpnBuilder(CouplerRckpn) - Method in interface nxopen.motion.CouplerCollection
-
Creates the builder object of
CouplerRckpn
object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createCptClineFbolt(int, UFDrf.Object[], UFDrf.Object) - Method in interface nxopen.uf.UFDrf
-
- createCptClineFcir(int, UFDrf.Object[], UFDrf.Object) - Method in interface nxopen.uf.UFDrf
-
- createCptClinePbolt(int, UFDrf.Object[], UFDrf.Object) - Method in interface nxopen.uf.UFDrf
-
- createCptClinePcir(int, UFDrf.Object[], UFDrf.Object) - Method in interface nxopen.uf.UFDrf
-
- createCrashBarrierBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createCrashBarrierBuilder(CrashBarrier) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
CrashBarrierBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createCreateComponentBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
- createCreateOperationBuilder(PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PdmSession
-
- createCreatePathBuilder(Part, Component) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createCreateTransitionBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
Creates a
CreateTransitionBuilder
object
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
Created in NX12.0.0
- createCreationPostBuilder() - Method in interface nxopen.sim.postconfigurator.PostConfiguratorManager
-
Creates a
CreationPostBuilder
object
License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
Created in NX10.0.3
- createCriteria() - Method in interface nxopen.preferences.RoutingPartLibrary
-
- createCriteriaObject(SearchModelViewBuilder.PmiTypes) - Method in interface nxopen.annotations.SearchModelViewBuilder
-
Create search criteria object in search model view builder
License requirements: None.
- createCrosshatch(int, int[], Tag[], Tag) - Method in interface nxopen.uf.UFDrf
-
- createCrossSection(Curve[], Expression, Expression, StockStyle) - Method in interface nxopen.routing.CrossSectionCollection
-
- createCrossSectionParameters() - Method in interface nxopen.cae.ResultManager
-
Creates a cross section parameter object.
- createCrossSectionViewForResult(int, int, CrossSectionParameters) - Method in interface nxopen.cae.Post
-
Create a new cross-section view with specified result on a loaded result id.
- createCrvCrvConstraint(UFMotion.CurveCurveConstraint) - Method in interface nxopen.uf.UFMotion
-
- createCsdEvaluationSettingBuilder(CsdEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates CSD evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createCsdExcitationBuilder(CSDExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
Creates the builder object of
DDAMExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
- createCset(Tag, String) - Method in interface nxopen.uf.UFAssem
-
- createCSunkHole(double[], double[], String, String, String, String, String, Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createCSYS() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the datum CSYS creation
License requirements: None.
- createCsys(double[], Tag) - Method in interface nxopen.uf.UFCsys
-
- createCsysMappingMatrix(double[], double[]) - Method in interface nxopen.uf.UFTrns
-
- CreateCsysMappingMatrixData() - Constructor for class nxopen.uf.UFTrns.CreateCsysMappingMatrixData
-
- createCsysOnNonPlanar() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Creates datum csys pattern on non planar face/curve
License requirements: None.
- createCurvature(ICurve, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
- createCurvature(Point, ICurve, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
- createCurvature(Face, Scalar, Scalar, boolean, Offset.OnFaceOption, Direction, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
Creates a
Offset
on a
Face
using two
Scalar
s representing the u and v parameters with option of
direction on the face.
- createCurvature(Point, Face, Offset.OnFaceOption, SmartObject, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
- createCurvature(Face, Scalar, Scalar, boolean, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
Creates a sectional
Offset
on a
Face
using two
Scalar
s representing the u and v parameters and a
Scalar
representing section angle measured with respect to
positive U parameter direction at u and v parameters of the face.
- createCurvatureDerivative(ICurve, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
- createCurvatureDerivative(Point, ICurve, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
- createCurvatureDerivative(Face, Scalar, Scalar, boolean, Offset.OnFaceOption, Direction, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
Creates a
Offset
on a
Face
using two
Scalar
s representing the u and v parameters with option of
direction on the face.
- createCurvatureDerivative(Point, Face, Offset.OnFaceOption, SmartObject, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
- createCurvatureDerivative(Face, Scalar, Scalar, boolean, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
Creates a sectional
Offset
on a
Face
using two
Scalar
s representing the u and v parameters and a
Scalar
representing section angle measured with respect to
positive U parameter direction at u and v parameters of the face.
- createCurveAnalysisCombsBuilder() - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
- createCurveAnalysisInflectionsBuilder() - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
- createCurveAnalysisPeaksBuilder() - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
- createCurveBoundaryFromPermanent() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Create curve boundary from permanent one
License requirements: cam_base ("CAM BASE")
.
- createCurveContactBuilder(CurveContact) - Method in interface nxopen.motion.CurveContactCollection
-
Creates a
CurveContact
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
- createCurveContinuityBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a Curve Continuity Builder
License requirements: gateway ("UG GATEWAY")
.
- createCurveCurvatureAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a curve curvature analysis builder
License requirements: gateway ("UG GATEWAY")
.
- createCurveExtract(Tag, UFSo.UpdateOption, Tag, int, int, Tag) - Method in interface nxopen.uf.UFSo
-
- createCurveFromEdge(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- createCurvelengthBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Curvelength builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createCurveLengthDimensionBuilder(BaseArcLengthDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createCurveMesh(UFModl.StringList, UFModl.StringList, UFModl.StringList, int, int, int, int, UFModl.FeatureSigns, double[], Tag[], int[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createCurveOnCurveBuilder(CurveOnCurve) - Method in interface nxopen.motion.CurveOnCurveCollection
-
Creates a
CurveOnCurveBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createCurveOnCurveJointBuilder(CurveOnCurveJoint) - Method in interface nxopen.mechatronics.CurveOnCurveJointCollection
-
- createCurveOnSurfaceBuilder(CurveOnSurface) - Method in interface nxopen.features.FeatureCollection
-
Creates a Curve On Surface feature builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createCurveOption() - Method in interface nxopen.SketchEvaluator
-
Returns the option which allows automatic create of non-associative UG curves
for the sketch evaluation.
- createCurves() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns a value that indicates whether to create curves.
- createCurvesForGouges() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the indicator to create curves for the gouged motions
License requirements: None.
- createCurvesFromPolygonFace(Part, CAEFace) - Method in interface nxopen.cae.CADModeling
-
CREATE curves from polygon face in part
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCurvesToDivideFace() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the curves created to divid the face
License requirements: None.
- createCushionControlBuilder(Part, CushionControl) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
CushionControlBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createCustomBracketBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
CustomBracketBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
- createCustomDoubleArrayAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomDoubleAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomerValueBusinessModifier(String) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- createCustomerValueBusinessModifierBuilder(CustomerValueBusinessModifier) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- createCustomExpressionArrayAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomExpressionAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
CustomFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX11.0.0
- createCustomFeatureSelectionFilter() - Method in interface nxopen.features.CustomFeatureClassManager
-
Get the Custom Feature Selection Filter object
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createCustomIntegerArrayAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomIntegerAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomLogicalArrayAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomLogicalAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomPopupMenuHandler() - Method in interface nxopen.UI
-
Create a custom menu.
- createCustomStringArrayAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomStringAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomSymbol(CustomSymbolData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.CustomSymbolCollection
-
- createCustomSymbolInstance(UFDrf.CustomSymbol) - Method in interface nxopen.uf.UFDrf
-
- createCustomTagArrayAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomTagAttribute(String, CustomAttribute.Property[]) - Method in interface nxopen.features.CustomAttributeCollection
-
- createCustomView(NXObject) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Create a custom view in the target container
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- createCustomViewSettingsBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
- createCustomWebAppMenuHandler() - Method in interface nxopen.pdm.WebAppSession
-
Create a custom WebApp menu handler.
- createCut(UFVariant, double[], double[]) - Method in interface nxopen.uf.UFDrpos
-
- createCutcom(UFVariant, UFPath.Cutcom, String) - Method in interface nxopen.uf.UFPath
-
- createCutCopyPasteBuilder() - Method in interface nxopen.drafting.DraftingApplicationManager
-
Creates the CutCopyPaste builder
License requirements: None.
- createCutDepthChecker() - Method in interface nxopen.cam.CAMSetup
-
Creates a Cut Depth Checker.
- createCutFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a cut face builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createCutout2Builder(Cutout2) - Method in interface nxopen.features.ShipCollection
-
- createCuttingSideFacesBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
CuttingSideFacesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createCutVolume() - Method in interface nxopen.cam.CutVolumeGeom
-
Create an empty cut volume
License requirements: cam_base ("CAM BASE")
.
- createCutWire(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createCyclicSymmetricParameters() - Method in interface nxopen.cae.ResultManager
-
Creates a cyclic symmetric object based on an existing Post View
It is user's responsibility to destroy the result access object once done
using
ResultManager.deleteCyclicSymmetricParameters(nxopen.cae.CyclicSymmetricParameters)
, in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX11.0.0
- createCyl1(UFModl.FeatureSigns, double[], String, String, double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createCylinder(UFModl.FeatureSigns, Tag, double[], String, String, double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createCylinderBoundingVolumeRecipe(String, CoordinateSystem, Expression, Expression, CaeSetGroupFilterType[]) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Create a Bounding Volume Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createCylinderBoundingVolumeRecipe(String, Expression, Point, Point, CaeSetGroupFilterType[]) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Create a Bounding Volume Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createCylinderBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
CylinderBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX5.0.0
- createCylinderFaceMethod(CAEBody, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createCylinderFaceMethod(CAEBody[], double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createCylinderFaceMethod(CAEBody[], boolean, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a cylinder face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCylinderFaceMethod(CAEFace[], double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createCylinderFaceMethod(CAEFace[], boolean, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a cylinder face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createCylinderMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a Cylinder Milling operation builder
License requirements: cam_base ("CAM BASE")
.
- createCylindricalBushing(UFMotion.CylindricalBushing) - Method in interface nxopen.uf.UFMotion
-
- createCylindricalCoordinateSystem(Point3d, Vector3d, Vector3d) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a new cylindrical coordinate system
License requirements: None.
- createCylindricalCoordinateSystem(Point3d, NXMatrix, boolean) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a new cylindrical coordinate system
License requirements: None.
- createCylindricalCoordinateSystem(Xform, SmartObject.UpdateOption) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a CylindricalCoordinateSystem from a Xform and update option.
- createCylindricalDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createCylindricalDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a cylindrical dimension
License requirements: drafting ("DRAFTING")
.
- createCylindricalJointBuilder(CylindricalJoint) - Method in interface nxopen.mechatronics.CylindricalJointCollection
-
- createCylPocket(double[], double[], String, String, String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- CREATED - Static variable in class nxopen.issue.IssueManager.State
-
Created state
- created - Variable in class nxopen.tooling.MWDefineRegionsBuilder.OrCreateEmptyRegionData
-
Return flag indicating if an empty region UDO is created
- created - Variable in class nxopen.tooling.MWDesignGuideLinesBuilder.CreateGuideLineData
-
1 if a guide line has been created, or 0 if existing guide line is returned
- createDamageEvaluationBuilder() - Method in interface nxopen.cae.DurabilityManager
-
Creates a builder for a durability damage evaluation.
- createDamper() - Method in interface nxopen.motion.SpringBuilder
-
Returns the create damper toggle
License requirements: None.
- createDamper(UFMotion.SpringDamper) - Method in interface nxopen.uf.UFMotion
-
- createDamperBuilder(Damper) - Method in interface nxopen.motion.DamperCollection
-
Return
DamperBuilder
object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createDamperEadBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Damper EAD block.
- createDamperEadBuilder(FEElement) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Damper EAD block and initializes it with the input element if defined.
- createDampingFactorBuilder(TaggedObject) - Method in interface nxopen.cae.LaminateDynamicSimCollection
-
Creates a builder for the laminate damping factor.
- createDaoOptimizationSolutionResult(DAOSolution) - Method in interface nxopen.cae.ResultManager
-
- createdApplication() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the application where joint is created
License requirements: None.
- createData(CustomFeatureClass, CustomAttribute[]) - Method in interface nxopen.features.CustomFeatureDataCollection
-
- createDataset(Tag, String) - Method in interface nxopen.uf.UFClear
-
- createDataSetToggle() - Method in interface nxopen.features.shipdesign.ReadDataSetBuilder
-
Returns the property that if the toggle is on then the native file will be added to current work part as a data set
License requirements: None.
- createDataSourceBuilder() - Method in interface nxopen.cae.DataSourceCollection
-
Creates a
DataSourceBuilder
that will be used to create a data source
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX12.0.0
- createDateCondition(Property, String, Condition.OperatorOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createDateItemBuilder() - Method in interface nxopen.DateBuilder
-
- createDatum(DatumData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.GdtDatumCollection
-
Creates a PMI datum
License requirements: geometric_tol ("GDT")
.
- createDatum(DatumData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.GdtDatumCollection
-
Creates a drafting datum
License requirements: drafting ("DRAFTING")
.
- createDatum() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Create datum on selected face
License requirements: None.
- createDatumAxis() - Method in interface nxopen.formboard.FlipComponentBuilder
-
Creates datums axis at locations where selected formboard component
is connected to path.
- createDatumAxisBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Datum Axis feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- createDatumCsys(Tag, Tag, boolean) - Method in interface nxopen.uf.UFModlFeatures
-
- createDatumCsysBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Datum CSYS feature builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createDatumCsysOffset(Tag, Tag, double[], double[], boolean) - Method in interface nxopen.uf.UFModlFeatures
-
- createDatumPinBuilder(DatumPin) - Method in interface nxopen.weld.WeldManager
-
- createDatumPlane() - Method in interface nxopen.display.DynamicSectionBuilder
-
Creates a datum plane from the active section plane.
- createDatumPlane() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
The create datum plane
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- createDatumPlaneBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Datum Plane feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createDatumPlaneGridBuilder(DatumPlaneGrid) - Method in interface nxopen.display.GridCollection
-
- createDatumPlaneGridBuilder(DatumPlane[]) - Method in interface nxopen.display.GridCollection
-
Creates a
DatumPlaneGridBuilder
object
used to build datum plane grids based on the supplied datum plane list.
- createDatumReferenceBuilder(FcfDatumReference) - Method in interface nxopen.annotations.AnnotationManager
-
- createDatumSurfaceBuilder(DatumSurface) - Method in interface nxopen.weld.WeldManager
-
- createDBColumnGridNode(Part) - Method in interface nxopen.linedesigner.DBNodeManager
-
Creates column grid node
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createDBConveyorNode(Part) - Method in interface nxopen.linedesigner.DBNodeManager
-
Creates conveyor node
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createDbEntityProxy(String, int, TaggedObject, TaggedObject) - Method in interface nxopen.pdm.DBEntityProxyCollection
-
- createDBFactoryCadGeoNode(Part) - Method in interface nxopen.linedesigner.DBNodeManager
-
Creates FactoryCad node
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createDBFactoryNode(Part, DBFactoryNode.NodeType) - Method in interface nxopen.linedesigner.DBNodeManager
-
Factory node creation API
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createDBFenceNode(Part) - Method in interface nxopen.linedesigner.DBNodeManager
-
Creates fence node
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createDBFloorEquipmentNode(Part) - Method in interface nxopen.linedesigner.DBNodeManager
-
Creates floor equipment node
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createDBNodeContainer(Part) - Method in interface nxopen.linedesigner.DBNodeManager
-
Creates node container
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createDBPlatformEquipmentNode(Part) - Method in interface nxopen.linedesigner.DBNodeManager
-
Creates platform equipment node
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createDBStairwayEquipmentNode(Part) - Method in interface nxopen.linedesigner.DBNodeManager
-
Creates stairway equipment node
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createdByInsert() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the indication that the blank to be updated was created by insert method.
- createDdamExcitationBuilder(DDAMExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
Creates the builder object of
DDAMExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
- createDecalBuilder(TaggedObject) - Method in interface nxopen.display.DecalCollection
-
- createDecalBuilderFull(TaggedObject) - Method in interface nxopen.display.DecalCollection
-
Creates a
DecalBuilder
object with image referenced object if decal is null.
- createDecimateFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
- createDeckBuilder(Deck) - Method in interface nxopen.features.ShipCollection
-
- createDeckListItemBuilder() - Method in interface nxopen.features.shipdesign.DecksBuilder
-
- createDecksBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
DecksBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
- createDefaultCsys() - Method in interface nxopen.sim.KinematicJunctionBuilder
-
Create the default CSYS based on WCS
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- createDefaultGeometry() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Creates the initial set of formboard geometry using the current
default values stored in the builder.
- createDefaultSheet(String, NXObject, int, int) - Method in interface nxopen.tooling.DesignTrimToolBuilder
-
Create a Moldwizard default trim surface, including CORE_TRIM_SHEET, CAVITY_TRIM_SHEET, CORE_MOLD_SURFACE, CAVITY_MOLD_SURFACE.
- createDefaultSpine() - Method in interface nxopen.die.AddSurfBuilder
-
Creates a smoothed spine curve from the forming boundary using the spine radius value
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createDefaultSpine() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Creates a smoothed spine curve from the forming boundary using the spine radius value
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createDefineCamBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates Define Cam builder.
- createDefineComponentAnchorPointBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
DefineComponentAnchorPointBuilder
that can define the Anchor Point location of a
2D Component
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
- createDefineComponentBuilder(Component) - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
DefineComponentBuilder
that can create a fully defined 2D
Component with specified content, anchor point, name and reuse library destination folder.
- createDefineLifterBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates Define Lifter builder.
- createDefineRunBuilder(Run) - Method in interface nxopen.routing.RouteManager
-
- createDefineTitleBlockBuilder(TitleBlock) - Method in interface nxopen.annotations.TitleBlockCollection
-
- createDefineTitleBlockBuilder(TitleBlock) - Method in interface nxopen.diagramming.TitleBlockCollection
-
- createDefineWorkRegionBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- CreateDefinitionBuilder - Interface in nxopen.ame
-
Create and classify definition
This object does not need a creator.
- createDeformablePart(UFAssem.DeformData) - Method in interface nxopen.uf.UFAssem
-
- createDeformationParameters() - Method in interface nxopen.cae.ResultManager
-
Creates a deformation parameter object.
- createDeformDefinitionBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createDeleteBodyBuilder(DeleteBody) - Method in interface nxopen.features.FeatureCollection
-
Creates a
DeleteBodyBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
- createDeleteComponentBuilder() - Method in interface nxopen.tooling.ElectrodeDesignCollection
-
Creates electrode delete component builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- createDeleteConstraintBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createDeleteCurveBuilder(DeleteCurve) - Method in interface nxopen.features.SynchronousCurveCollection
-
Creates a
DeleteCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
- createDeleteEdgeBuilder(DeleteEdge) - Method in interface nxopen.features.FeatureCollection
-
Creates a
DeleteEdgeBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
- createDeleteElementBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element delete command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createDeleteFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a delete face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createDeleteFontsBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
- createDeleteGapsBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
- createDeleteObjectsBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
- createDeletePolygonFaceBuilder() - Method in interface nxopen.cae.AbstractionManager
-
- createDeleteSeamBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
DeleteSeamBuilder
License requirements: nx_ship_basic ("Ship Basic Design")
Created in NX8.0.0
- createDeltaMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Delta Move.
- createDemoCylinderListItemBuilder() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
- createdEo() - Method in interface nxopen.ame.EngineeringObjectBuilder
-
Returns the created eo
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createDependencyCreatorBuilder() - Method in interface nxopen.mechatronics.MechatronicsManager
-
- createDependentMeshBuilder(DependentMesh) - Method in interface nxopen.cae.MeshManager
-
Creates a dependent mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createDependentVariable(Field, NameVariable, Unit) - Method in interface nxopen.fields.FieldManager
-
Create a dependent variable to be added to the field
License requirements: None.
- createDependentVariable(Field, NameVariable, Unit, FieldVariable.ValueType) - Method in interface nxopen.fields.FieldManager
-
Create a dependent variable to be added to the field, specifying the variable value type
License requirements: None.
- createDesignContextBuilder() - Method in interface nxopen.pid.PidManager
-
Creates a
DesignContextBuilder
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
Created in NX11.0.0
- createDesignElementBuilder(Part, DesignElementBuilder.OperationType) - Method in interface nxopen.CollaborativeContentManager
-
Creates a
DesignElementBuilder
for creating or revising design elements
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX8.5.0
- createDesignElementLogicalObjects() - Method in interface nxopen.assemblies.CopyDesignElementBuilder
-
Creates the pre-creation objects for the design elements to be copied
License requirements: nx_4gd_integration ("4th Generation Design")
.
- createDesignResponseBuilder(TBSDesignResponse) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
Creates the builder of
TBSDesignResponse
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
- createDesignRuleViolation(String, String, NXObject[]) - Method in interface nxopen.routing.DesignRuleViolationCollection
-
- createDesignRuleViolationLocation(DesignRuleViolationLocationCollection.DeleteOption, NXObject[]) - Method in interface nxopen.routing.DesignRuleViolationLocationCollection
-
- createDesignRuleViolationViewer(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Creates a
DesignRuleViolationViewer
to display the given violations
in the Design Rule Violation Browser just like the Browse Violations command.
- createDesignRuleViolationViewer() - Method in interface nxopen.routing.RouteManager
-
Runs all the registered Design Rules just like the Interactive Check command.
- createDesignStudyAttributeBuilder() - Method in interface nxopen.optimization.DesignStudyCollection
-
Create builder for DesignStudyAttribute class
License requirements: None.
- createDesignStudyBuilder() - Method in interface nxopen.optimization.DesignStudyCollection
-
Create builder for design study class
License requirements: None.
- createDesignTrimToolBuilder() - Method in interface nxopen.tooling.DesignTrimToolCollection
-
Creates a DesignTrimTool builder
License requirements: None.
- createDesignVariableBuilder(DAODesignVariable) - Method in interface nxopen.cae.optimization.DAOSolution
-
Creates the builder object of optimization solution design variable
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createDesignVariableBuilder(DAODesignVariable) - Method in interface nxopen.cae.optimization.DAOSolutionCollection
-
- createDesignVariableBuilder(TBSDesignVariable) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
Creates the builder of
TBSDesignVariable
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
- createDestinationCollectorBuilder(boolean, ElementTypeBuilder) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Destination Collector Specification block.
- createDetailViewBuilder(DetailView) - Method in interface nxopen.drawings.DraftingViewCollection
-
Creates a
DetailViewBuilder
License requirements: drafting ("DRAFTING")
Created in NX6.0.0
- createDetectPrimitivesBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
- createDeviationCheckingObject() - Method in interface nxopen.geometricanalysis.AnalysisManager
-
Creates a deviation checking object
License requirements: None.
- createDeviationGaugeBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a Deviation Gauge Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createdHoleManufacturingNote() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the created hole manufacturing note
License requirements: None.
- createDiagnosticGroups() - Method in interface nxopen.cae.DurabilityEventSolverBuilder
-
Returns the create diagnostic groups.
- createDiagnosticGroups() - Method in interface nxopen.cae.DurabilitySolverBuilder
-
Returns the create diagnostic groups.
- createDialog(String) - Method in interface nxopen.UI
-
Creates a block dialog.
- createDiameterDim(UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createDiameterDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a diameter dimension
License requirements: drafting ("DRAFTING")
.
- createDiameterDimension(Sketch.DimensionGeometry, Point3d, Expression) - Method in interface nxopen.Sketch
-
Creates a diameter dimension constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createDiameterDimension(Sketch.DimensionGeometry, Point3d, Expression, Sketch.DimensionOption) - Method in interface nxopen.Sketch
-
Creates a diameter dimension constraint.
- createDieAttribute() - Method in interface nxopen.die.DieCollection
-
- createDieBaseBuilder() - Method in interface nxopen.tooling.DieBaseCollection
-
Creates Die Base builder.
- createDieBoolean() - Method in interface nxopen.die.DieCollection
-
- createDieCavityAndSlugHoleBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
- createDieData(boolean) - Method in interface nxopen.die.Tip
-
Creates a copy of the product data in die position.
- createDieDesDrawDieBuilder(Feature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Design Draw Die builder.
- createDieDesDrawPunchBuilder(Feature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Design Draw Punch builder.
- createDieDesignLowerBinderBuilder(Feature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Design Lower Binder Builder
License requirements: ug_die_design ("Die Design")
.
- createDieDesignSettingBuilder() - Method in interface nxopen.tooling.DieDesignSettingCollection
-
Creates die design setting builder.
- createDieDesignTrimPostBuilder(Feature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Design Trim Post Builder
License requirements: ug_die_design ("Die Design")
.
- createDieDesPierceInsertBuilder() - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Design Pierce Insert builder
License requirements: None.
- createDieDirection(Feature) - Method in interface nxopen.die.DieCollection
-
- createDieEngDefineProductOrientationBuilder(Feature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Engineer Define Product Orientation builder.
- createDieEngDieTipBuilder(Feature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Engineer Die Tip Builder
License requirements: die_engineering ("DIE ENGINEERING")
.
- createDieEngFormTaskBuilder(Feature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates the form task feature builder.
- createDieEngLineUpBuilder(BodyFeature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Engineer Line Up Builder
License requirements: die_engineering ("DIE ENGINEERING")
.
- createDieEngProcessUpdateManagerBuilder(BodyFeature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Engineer Process Update Manager builder.
- createDieEngStampingCarryoverBuilder(BodyFeature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates the stamping carryover feature builder.
- createDieEngStampingOutputBuilder(BodyFeature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Stamping Output builder.
- createDieEngTrimAngleCheckBuilder(AnalysisObject) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Engineering Trim Angle Check builder
License requirements: die_engineering ("DIE ENGINEERING")
.
- createDieEngTrimTaskBuilder(BodyFeature) - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Die Engineer Trim Task Builder
License requirements: ug_die_design ("Die Design")
.
- createDieInsertBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates a
DieInsertBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX11.0.0
- createDieLimits() - Method in interface nxopen.die.DieCollection
-
- createDieLocation() - Method in interface nxopen.die.DieCollection
-
- createDieLocations(Feature, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Method in interface nxopen.die.DieCollection
-
- createDiePlane(Feature) - Method in interface nxopen.die.DieCollection
-
- createDimension() - Method in interface nxopen.features.RPOBuilder
-
Creates a new empty RPODimension object
License requirements: None.
- createDimension(Sketch.ConstraintType, Sketch.DimensionGeometry, Sketch.DimensionGeometry, Point3d, Expression) - Method in interface nxopen.Sketch
-
Creates a dimension between two geometric objects.
- createDimension(Sketch.ConstraintType, Sketch.DimensionGeometry, Sketch.DimensionGeometry, Point3d, Expression, Sketch.DimensionOption) - Method in interface nxopen.Sketch
-
Creates a dimension between two geometric objects.
- createDimension() - Method in interface nxopen.SketchOffsetBuilder
-
Returns the flag to create offset with a dimension or a dimensionless offset
License requirements: None.
- createDimension(Tag, UFSket.ConType, UFSket.DimObject, UFSket.DimObject, double[]) - Method in interface nxopen.uf.UFSket
-
- createDimensionalConstraint(Tag, UFSket.ConType, int, UFSket.DimObject[], double[]) - Method in interface nxopen.uf.UFSket
-
- createDimensionBuilder(SketchDimensionalConstraint) - Method in interface nxopen.SketchCollection
-
Creates a
SketchDimensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
- createDimpleFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Dimple feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createDirection(Point3d, Vector3d, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Line, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(IBaseCurve, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(DatumAxis, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(ControlPoint, ControlPoint, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(IParameterizedSurface, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(IBasePlane, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Sketch, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Conic, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(IBaseCurve, Scalar, Direction.OnCurveOption, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(IBaseCurve, Point, Direction.OnCurveOption, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Face, Scalar, Scalar, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
Creates a Direction normal to the
Face
using two
Scalar
s representing the u and v parameters.
- createDirection(Face, Scalar, Scalar, boolean, Direction.OnFaceOption, Direction, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
Creates a
Direction
on a
Face
using two
Scalar
s representing the u and v parameters with the option of
direction on face.
- createDirection(Face, Scalar, Scalar, boolean, Scalar, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
Creates a sectional
Direction
on a
Face
using two
Scalar
s representing the u and v parameters and a
Scalar
representing section angle measured with respect to
positive U parameter direction at u and v parameters of the face.
- createDirection(Point, Face, Direction.OnFaceOption, SmartObject, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Direction, Xform, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Point, Vector3d) - Method in interface nxopen.DirectionCollection
-
Creates a
Direction
based upon the parameters used
to define the point.
- createDirection(Face, Point, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Direction, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Port, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Direction, Direction, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(Point, Expression, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirection(IParameterizedSurface, Point, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
Creates a
Direction
using the normal of a non-planar
Face
at a
Point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR nx_masterfem ("Finite Element Modeling") OR geometric_tol ("GDT")
Created in NX6.0.0
- createDirection(ScCollector, Point, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirectionOnPointParentCurve(Point, IBaseCurve, Direction.OnCurveOption, Sense, SmartObject.UpdateOption) - Method in interface nxopen.DirectionCollection
-
- createDirectionVector() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the option to control if a reference datum axis should be output with this feature.
- createDirectory(String) - Method in interface nxopen.RemoteUtilities
-
Creates a directory.
- createDirectUnbendBuilder() - Method in interface nxopen.tooling.DirectUnfoldCollection
-
Creates direct unbend builder
License requirements: None.
- createDirectUnfoldBuilder() - Method in interface nxopen.tooling.DirectUnfoldCollection
-
Creates create direct unfold builder
License requirements: None.
- createDirrAxisOfConic(Tag, UFSo.UpdateOption, Tag, boolean) - Method in interface nxopen.uf.UFSo
-
- createDirrDoubles(Tag, UFSo.UpdateOption, double[]) - Method in interface nxopen.uf.UFSo
-
- createDirrDoublesPnt(Tag, UFSo.UpdateOption, double[], double[]) - Method in interface nxopen.uf.UFSo
-
- createDirrExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createDirrLine(Tag, UFSo.UpdateOption, Tag, boolean) - Method in interface nxopen.uf.UFSo
-
- createDirrNormalToSurfacePoint(Tag, UFSo.UpdateOption, Tag, Tag, boolean) - Method in interface nxopen.uf.UFSo
-
- createDirrOnCurve(Tag, UFSo.UpdateOption, Tag, Tag, UFSo.DirrOnCurveOption, boolean) - Method in interface nxopen.uf.UFSo
-
- createDirrOnSurf(Tag, UFSo.UpdateOption, UFSo.DirrOnSurfData) - Method in interface nxopen.uf.UFSo
-
- createDirrPlane(Tag, UFSo.UpdateOption, Tag, boolean) - Method in interface nxopen.uf.UFSo
-
- createDirrSurfaceAxis(Tag, UFSo.UpdateOption, Tag, boolean) - Method in interface nxopen.uf.UFSo
-
- createDirrTwoDirs(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createDirrTwoPoints(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createDisplayChangerBuilder(DisplayChanger) - Method in interface nxopen.mechatronics.DisplayChangerCollection
-
- createDisplayNodalCsysBuilder() - Method in interface nxopen.cae.NodeElementInfoManager
-
Creates a builder for displaying nodal coordinate systems
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createDisplayPropertiesBuilder(Field[]) - Method in interface nxopen.fields.FieldManager
-
- createDisplaySolidBuilder() - Method in interface nxopen.features.ShipCollection
-
- createDistance(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFGexp
-
- createDistance1Dimension() - Method in interface nxopen.SketchChamferBuilder
-
Returns the flag to indicate whether to create a dimension for
SketchChamferBuilder.distance1()
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createDistance2Dimension() - Method in interface nxopen.SketchChamferBuilder
-
Returns the flag to indicate whether to create a dimension for
SketchChamferBuilder.distance2()
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createDistanceAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollectionEx
-
Creates a distance analysis builder.
- CreateDistanceData() - Constructor for class nxopen.uf.UFGexp.CreateDistanceData
-
- createDistanceSensorBuilder(DistanceSensor) - Method in interface nxopen.mechatronics.DistanceSensorCollection
-
- createDistributeAnnotationsBuilder() - Method in interface nxopen.drafting.AutomationManager
-
- createDistributedLoadExcitationBuilder(DistributedLoadExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
Creates the builder object of
DistributedLoadExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
- createDivideBuilder(Divide) - Method in interface nxopen.features.ShipCollection
-
- createDivideCurveBuilder(Feature) - Method in interface nxopen.features.BaseFeatureCollection
-
Creates a
DivideCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createDividefaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Divideface builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createDivideFacetFaceBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
Creates a
DivideFacetFaceBuilder
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
Created in NX12.0.0
- createDivisions() - Method in interface nxopen.routing.DivisionsBuilder
-
Creates two new divisions by splitting the parent division.
- createDivisionsBuilder(NXObject, boolean) - Method in interface nxopen.routing.RouteManager
-
Creates a Divisions builder.
- createDocumentationBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a documentation operation builder
License requirements: cam_base ("CAM BASE")
.
- createDocumentStructureBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
DocumentStructureBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createDofset(String, FENode[], boolean[], boolean[], boolean[], boolean[], boolean[], boolean[]) - Method in interface nxopen.cae.CaeDOFSetCollection
-
Create a DOFSet
A true for a dof logical entry would mean that the dof is included for that corresponding node.
- createDolReportFile(String) - Method in interface nxopen.uf.UFDieeng
-
- createdOrdinateOrigin() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the created ordinate origin tag
License requirements: None.
- createdOrdinateOrigin() - Method in interface nxopen.tooling.HoleReportBuilder
-
Returns the created ordinate origin
License requirements: None.
- createDoubleAttributeListEntry(boolean, boolean, boolean, String, int, int, String, double) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
- createDoubleAttributeListEntry(boolean, boolean, boolean, boolean, String, int, int, String, double) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
Create a double attribute list entry and add it to the list.
- createDoveTailSlot(double[], double[], double[], String, String, String, String, Tag, Tag, Tag) - Method in interface nxopen.uf.UFModl
-
- createDpmcvDriveCurve(Section) - Method in interface nxopen.cam.DmCurveBuilder
-
Create a Drive Curve
License requirements: cam_base ("CAM BASE")
.
- createDpmitpBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates an itp builder
License requirements: cam_base ("CAM BASE")
.
- createDraftAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a draft analysis builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- createDraftBodyBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
DraftBodyBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createDraftBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a draft builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createDraftingComponent() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
Returns the flag indicating whether to creates a drafting component when creating a view of the master model part
License requirements: None.
- createDraftingCustomSymbolBuilder(CustomSymbol) - Method in interface nxopen.annotations.CustomSymbolCollection
-
Creates the Drafting Symbol placement builder
License requirements: None.
- createDraftingDatumFeatureSymbolBuilder(DraftingDatum) - Method in interface nxopen.annotations.GdtDatumCollection
-
- createDraftingDatumTargetBuilder(DraftingDatumTarget) - Method in interface nxopen.annotations.AnnotationManager
-
- createDraftingDrawingSheetBuilder(DraftingDrawingSheet) - Method in interface nxopen.drawings.DraftingDrawingSheetCollection
-
- createDraftingFeatureControlFrameBuilder(Gdt) - Method in interface nxopen.annotations.AnnotationManager
-
- createDraftingNoteBuilder(SimpleDraftingAid) - Method in interface nxopen.annotations.AnnotationManager
-
- createDraftingSplineBuilder(Spline) - Method in interface nxopen.features.FeatureCollection
-
Creates a Studio Spline builder for drafting
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createDraftingSurfaceFinishBuilder(DraftingSurfaceFinish) - Method in interface nxopen.annotations.DraftingSurfaceFinishCollection
-
If null create a new Drafting Surface Finish, otherwise edit existing Drafting Surface Annotatation
License requirements: None.
- createDraftPointData(Point, String) - Method in interface nxopen.DraftPointDataCollection
-
Creates a DraftPointData object.
- createDragData() - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder
-
To create drag data
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createDrapingDataBuilder() - Method in interface nxopen.cae.LaminatePly
-
- createDrapingExtensionBuilder() - Method in interface nxopen.cae.LaminatePly
-
- createDrawBeadBuilder(DrawBead) - Method in interface nxopen.die.DieCollection
-
- createDrawBeadSegment() - Method in interface nxopen.die.DrawBeadBuilder
-
- createDrawHelper() - Method in interface nxopen.fields.Field
-
Creates a field drawhelper which can be used to get display attributes of this field.
- createDrawing(String, String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Create drawing
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createDrawing(String, String, String, String) - Method in interface nxopen.tooling.CompDrawingBuilder
-
- createDrawingAnnotationBuilder() - Method in interface nxopen.features.ShipCollection
-
- createDrawingCompareSettingsBuilder() - Method in interface nxopen.DrawingCompareManager
-
- createDrawingCreationWizardBuilder(boolean) - Method in interface nxopen.drafting.AutomationManager
-
- createDrawingCreationWizardBuilderFromRule(String) - Method in interface nxopen.drafting.AutomationManager
-
- createDrawingEditSectionLineSettingsBuilder(SectionLine[]) - Method in interface nxopen.drafting.SettingsManager
-
Creates a
EditSectionLineSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
- createDrawingEditViewLabelSettingsBuilder(DisplayableObject[]) - Method in interface nxopen.drafting.SettingsManager
-
Creates a
EditViewLabelSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
- createDrawingEditViewSettingsBuilder(View[]) - Method in interface nxopen.drafting.SettingsManager
-
Creates a
EditViewSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
- createDrawingPartBuilder(Part) - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
Creates a
DrawingPartBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX12.0.0
- createDrawingRegionBuilder(DrawingRegion) - Method in interface nxopen.drawings.DrawingRegionCollection
-
Creates the DrawingRegion builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- createDrawingSheetBuilder(DrawingSheet) - Method in interface nxopen.features.shipdesign.DrawingPartBuilder
-
Creates a
DrawingSheetBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX12.0.0
- createDrawingSheetNameBuilder() - Method in interface nxopen.tooling.ToolingDrawingCollection
-
Creates drawing sheet name builder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createDrawingsPropertiesBuilder(DisplayableObject[]) - Method in interface nxopen.DraftingManager
-
Create the DrawingsPropertiesBuilder
License requirements: drafting ("DRAFTING")
.
- createDrawingViewBuilder(DrawingView) - Method in interface nxopen.drawings.DraftingViewCollection
-
Creates a DrawingViewBuilder
License requirements: drafting ("DRAFTING")
.
- createDrawnCutoutFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Drawn Cutout feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createDrf(UFGdt.DrfData) - Method in interface nxopen.uf.UFGdt
-
- createDrillBackCountersinkTool(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill back countersink tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillBackSpotfacingToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill back spotfacing tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillBoreToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill bore tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillBoringBarTool(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill boring bar tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillBurnishingToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill burnishing tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillCenterBellToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill center bell tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillChamferBoringBarTool(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill chamfer boring bar tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillCoreToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill core tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillCounterboreToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill counterbore tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillCtskToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill ctsk tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill geometry builder
License requirements: cam_base ("CAM BASE")
.
- createDrillMethodBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill method builder
License requirements: cam_base ("CAM BASE")
.
- createDrillReamerToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill reamer tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillSpotdrillToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill spotdrill tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillSpotfaceToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill spotface tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillStdToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillStepToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill step tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillTapToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill tap tool builder
License requirements: cam_base ("CAM BASE")
.
- createDrillThreadMillToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a drill thread mill tool builder
License requirements: cam_base ("CAM BASE")
.
- createDuctReinforcementBuilder(DuctReinforcement) - Method in interface nxopen.routing.RouteManager
-
Creates an HVAC Duct Reinforcement Builder.
- createDuctSizeCalculatorBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Creates a Duct size calculator builder.
- createDumbInflectionPoints() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Create inflection points
License requirements: None.
- createDumbPeakPoints() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Create peak points
License requirements: None.
- createDuplicateElementsCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating duplicate elements builder in a cae part.
- createDuplicateNodesCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating duplicate nodes builder in a cae part.
- createDurabilityEvaluateFatigueHistoryBuilder(DurabilityEvent) - Method in interface nxopen.cae.DurabilityManager
-
Creates a builder for Durability Evaluate Fatigue History.
- createDurabilityEventResult(DurabilityEvent) - Method in interface nxopen.cae.ResultManager
-
- createDurabilityResultsReportBuilder(DurabilityMetaSolution) - Method in interface nxopen.cae.DurabilityManager
-
Creates a builder for Durability Results Report.
- createDursolNx(String, Tag) - Method in interface nxopen.uf.UFSf
-
- createDvToMvMappingBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
DvToMvMappingBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
- createDwell(UFVariant, double, UFPath.DwellUnit, String) - Method in interface nxopen.uf.UFPath
-
- createDxfdwgCreator() - Method in interface nxopen.DexManager
-
Create the DxfdwgCreator
License requirements: None.
- createDxfdwgImporter() - Method in interface nxopen.DexManager
-
Create the DxfdwgImporter
License requirements: None.
- createDynamicCurbBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createDynamicCurbBuilder(DynamicCurb) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
DynamicCurbBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createDynamicCutElbowBehaviorBuilder(Part) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createDynamicObjectTableBuilder(DynamicObjectTable) - Method in interface nxopen.mechatronics.DynamicObjectTableCollection
-
- createDynamicRule(String, String, RuleManager.RuleType, String) - Method in interface nxopen.RuleManager
-
Create or modify a dynamic rule.
- createDynamicRule(String, String, String, String, String, String) - Method in interface nxopen.RuleManager
-
Create or modify a dynamic rule.
- createDynamicRule(String, String, String, String, String) - Method in interface nxopen.RuleManager
-
Create or modify a dynamic rule.
- createDynamicSectionBuilder(boolean) - Method in interface nxopen.BasePart
-
- createDynamicSimBuilder(LaminateDynamicSim) - Method in interface nxopen.cae.LaminateDynamicSimCollection
-
Creates a builder for the laminate dynamic sim.
- createEasyPatternBuilder(Feature) - Method in interface nxopen.weld.WeldManager
-
- createECADExportBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createECADImportBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createEdgeBlend(UFModl.EdgeBlendData) - Method in interface nxopen.uf.UFModlFeatures
-
- createEdgeBlendBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Edge Blend feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createEdgeBlendMult(UFModl.EdgeBlendMultData) - Method in interface nxopen.uf.UFModlFeatures
-
- createEdgeCutBuilder(EdgeCut) - Method in interface nxopen.features.ShipCollection
-
Creates a
EdgeCutBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
- createEdgeFaceConn(UFSf.EfConnInfo) - Method in interface nxopen.uf.UFSf
-
- createEdgeFaceImprintBuilder() - Method in interface nxopen.cae.AbstractionManager
-
- createEdgePathMethod(CAEEdge, CAEVertex) - Method in interface nxopen.cae.SmartSelectionManager
-
- createEdgePathMethod(CAEEdge, CAEVertex, boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates an edge path method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createEdgePrepBuilder(EdgePrep) - Method in interface nxopen.weld.WeldManager
-
- createEdgePrepValuesBuilder() - Method in interface nxopen.weld.WeldManager
-
- createEdgeReinforcementBuilder(EdgeReinforcement) - Method in interface nxopen.features.ShipCollection
-
- createEdgeRipFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Edge Rip feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createEdgeSticherBuilder() - Method in interface nxopen.cae.FemPart
-
Creates a
EdgeSticherBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.0
- createEdgeSymmetryBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
EdgeSymmetryBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX7.0.0
- createEditAnnotationBuilder(Part, AMEExtendedObject) - Method in interface nxopen.ame.AMEManager
-
Creates a
EditAnnotationBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createEditBendAngleBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
-
Creates an Edit Bend Angle builder.
- createEditBendBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
EditBendBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX7.5.0
- createEditBoundaryBuilder() - Method in interface nxopen.features.ShipCollection
-
- createEditCharacteristicsBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
- createEditClauseBuilder(Part, AMEQuery, QueryClause) - Method in interface nxopen.ame.AMEManager
-
Creates a
EditClauseBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createEditContextAttributesBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a Features.ShipDesign.EditContextAttributesBuilder.
- createEditCornerBuilder() - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
EditCornerBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX7.5.0
- createEditCrossSectionBuilder(EditCrossSection) - Method in interface nxopen.features.FeatureCollection
-
Creates a
EditCrossSectionBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX8.0.0
- createEditDefiningSectionBuilder() - Method in interface nxopen.SketchCollection
-
- createEditDimensionBuilder() - Method in interface nxopen.features.FeatureCollection
-
Creates a
EditDimensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX6.0.0
- createEditEngineeringObjectBuilder(Part, AMEEngObject) - Method in interface nxopen.ame.AMEManager
-
- createEditLeaderBuilder(DisplayableObject) - Method in interface nxopen.annotations.AnnotationManager
-
Creates a
EditLeaderBuilder
License requirements: drafting ("DRAFTING")
Created in NX6.0.1
- createEditLineSegmentBuilder(LineSegment) - Method in interface nxopen.routing.RouteManager
-
- createEditMethod() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the create and edit method.
- createEditObjectDisplayBuilder(MarkupObject[]) - Method in interface nxopen.markup.MarkupFileCollection
-
- createEditOrderBuilder(Part, NXObject) - Method in interface nxopen.ame.AMEManager
-
Creates a
EditOrderBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createEditPlacementBuilder(Part, Component) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createEditPlacePartBuilder(Component) - Method in interface nxopen.routing.RouteManager
-
Creates a
EditPlacePartBuilder
that is used to edit the location of a previously placed
routing part in an assembly.
- createEditPointBuilder(Part, Component) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createEditQueryBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
EditQueryBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createEditQueryScopeBuilder(Part, AMEQuery, QueryClause) - Method in interface nxopen.ame.AMEManager
-
Creates a
TCSavedQueriesBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createEditStockBuilder() - Method in interface nxopen.features.ShipCollection
-
- createEditTitleBlockBuilder(TitleBlock[]) - Method in interface nxopen.annotations.TitleBlockCollection
-
- createEditWeldingBuilder() - Method in interface nxopen.features.ShipCollection
-
- createEffectivityAttributePropertiesBuilder(BasePart, NXObject[]) - Method in interface nxopen.pdm.ConfigurationManager
-
- createEffectivityConditionBuilder(CollaborativeDesign, String) - Method in interface nxopen.BasePart
-
- createEffectivityConditionBuilder(CollaborativeDesign, String, String) - Method in interface nxopen.BasePart
-
- createEjectorPostProcessingBuilder() - Method in interface nxopen.tooling.EjectorPostProcessingCollection
-
Creates a EjectorPostProcessing builder
License requirements: None.
- createEjectorTableBuilder() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates Ejector Pin Table builder.
- createElbowSnapSettings() - Method in interface nxopen.routing.RouteManager
-
Creates a snap elbow settings object, this object is only useful for
LinearPathBuilder
object.
- createElectricalAnnotationSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createElectricalConnectionSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createElectricalDeviceRelationship() - Method in interface nxopen.routing.electrical.ElectricalDeviceRelationshipCollection
-
- createElectricalInterfaceTerminalRelationship() - Method in interface nxopen.routing.InterfaceTerminalRelationshipCollection
-
- createElectricalInterfaceTerminalRelationship(String) - Method in interface nxopen.routing.InterfaceTerminalRelationshipCollection
-
- createElectricalPartBuilder(ElectricalPart) - Method in interface nxopen.mechatronics.ElectricalPartCollection
-
Create builder for ElectricalPart class
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- createElectrodeCopyBuilder() - Method in interface nxopen.tooling.ElectrodeCopyCollection
-
Creates electrode copy builder
License requirements: None.
- createElemEdgePathMethod(FEElemEdge, FENode) - Method in interface nxopen.cae.SmartSelectionManager
-
- createElemEdgePathMethod(FEElemEdge, FENode, boolean, boolean, boolean, double, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates an elem edge path method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementalFunctionEvaluationSettingBuilder(ElementalFunctionEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates elemental function evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createElementConnectivityBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element connectivity command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementCreateBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element create command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementDetachBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element detach command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementEdgeCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating Model Check builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createElementExtractBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for Element Extract.
- createElementExtrudeBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element extrude command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementMaterialOrientationCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating element material orientation builder in a cae part.
- createElementModifyLabelBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element modify label command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementModifyOrderBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element modify order command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementModifyTypeBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element modify type command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementProjectBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element project command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementQualityCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating element quality Check builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createElementReflectBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element reflect command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementRevolveBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element revolve command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementRotateBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element translate command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementSplitBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element split command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementTranslateBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for element translate command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createElementTypeBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Element Type Specification block.
- createElemLabelMethod(boolean, int, int, int) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates an element label method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createEllipse(Point3d, double, double, double, double, double, NXMatrix) - Method in interface nxopen.CurveCollection
-
- createEllipse(Point3d, Vector3d, Vector3d, double, double, double, double) - Method in interface nxopen.CurveCollection
-
- createEllipse(Point2d, double, double) - Method in interface nxopen.markup.MarkupFileObjectCollection
-
Creates a
Ellipse
License requirements: None.
- createEmbedded() - Method in interface nxopen.MeasureAngle
-
- createEmbedded(MeasureBodies.ActiveValue) - Method in interface nxopen.MeasureBodies
-
- createEmbedded() - Method in interface nxopen.MeasureDistance
-
- createEmbedded(MeasureFaces.ActiveValue) - Method in interface nxopen.MeasureFaces
-
- createEmbedded() - Method in interface nxopen.MeasureLength
-
- createEmbeddedObject() - Method in interface nxopen.MeasureAngle
-
Creates an embedded measurement.
- createEmbeddedObject(MeasureBodies.ActiveValue) - Method in interface nxopen.MeasureBodies
-
Creates an embedded measurement.
- createEmbeddedObject() - Method in interface nxopen.MeasureDistance
-
Creates an embedded measurement.
- createEmbeddedObject(MeasureFaces.ActiveValue) - Method in interface nxopen.MeasureFaces
-
Creates an embedded measurement.
- createEmbeddedObject() - Method in interface nxopen.MeasureLength
-
Creates an embedded measurement.
- createEmbeddedObject() - Method in interface nxopen.MeasurePolarAngle
-
Creates an embedded measurement.
- createEmbeddedObject() - Method in interface nxopen.MeasurePolarArea
-
Creates an embedded measurement.
- createEmbeddedObject() - Method in interface nxopen.MeasurePolarRadius
-
Creates an embedded measurement.
- CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureAngle.CreateEmbeddedObjectData
-
- CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureBodies.CreateEmbeddedObjectData
-
- CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureDistance.CreateEmbeddedObjectData
-
- CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureFaces.CreateEmbeddedObjectData
-
- CreateEmbeddedObjectData() - Constructor for class nxopen.MeasureLength.CreateEmbeddedObjectData
-
- CreateEmbeddedObjectData() - Constructor for class nxopen.MeasurePolarAngle.CreateEmbeddedObjectData
-
- CreateEmbeddedObjectData() - Constructor for class nxopen.MeasurePolarArea.CreateEmbeddedObjectData
-
- CreateEmbeddedObjectData() - Constructor for class nxopen.MeasurePolarRadius.CreateEmbeddedObjectData
-
- createEmbedManagerBuilder() - Method in interface nxopen.features.FeatureCollection
-
Creates a
EmbedManagerBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX12.0.0
- createEmbossBodyBuilder(EmbossBody) - Method in interface nxopen.features.FeatureCollection
-
Creates a
EmbossBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
- createEmbossBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates an Emboss builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createEmptyBlendSetbackBuilder() - Method in interface nxopen.Part
-
- createEmptyBoundaryDefinitionBuilder() - Method in interface nxopen.Part
-
Creates boundary definition builder object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- createEmptyCageSectionBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
Creates an empty cage section builder object.
- createEmptyDatumReferenceBuilder() - Method in interface nxopen.annotations.AnnotationManager
-
Creates a new empty datum reference builder
License requirements: None.
- createEmptyExpressionCollectorSet() - Method in interface nxopen.Part
-
Creates an empty ExpressionCollectorSet item
License requirements: None.
- createEmptyExpressionSectionSet() - Method in interface nxopen.Part
-
Creates an empty ExpressionSectionSet item
License requirements: None.
- createEmptyFaceSet() - Method in interface nxopen.geometricutilities.FaceSetOffsetCollection
-
Creates an empty offset face set, with all parameters set to 0 or null
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createEmptyGeometrySet() - Method in interface nxopen.cam.SurfaceDriveGeometry
-
Create an empty geometry set
License requirements: cam_base ("CAM BASE")
.
- createEmptyLayoutState(String) - Method in interface nxopen.cae.LayoutStateCollection
-
Creates an empty
LayoutState
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX12.0.0
- createEmptyMatch() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
This is the default creator for a parent equivalency map.
- createEmptyPartFamilyInstanceSelectionCriteria(Template) - Method in interface nxopen.assemblies.Component
-
- createEmptyPath() - Method in interface nxopen.cam.CAMObject
-
Create an empty path for the object
License requirements: cam_base ("CAM BASE")
.
- createEmptyRegionPoint() - Method in interface nxopen.Part
-
Creates an empty item that contains a point and its corresponding body context for a region
License requirements: None.
- createEmptySelectionList() - Method in interface nxopen.Part
-
- createEmptySpinePlaneBuilder() - Method in interface nxopen.Part
-
Creates spine plane builder object
License requirements: None.
- createEmptyTransitionCurveBuilder() - Method in interface nxopen.Part
-
- createEmptyTwoExpressionsCollectorSet() - Method in interface nxopen.Part
-
Creates an empty TwoExpressionCollectorSet item that contains
a
ScCollector
collection
and two corresponding expressions
License requirements: None.
- createEmptyTwoExpressionsSectionSet() - Method in interface nxopen.Part
-
Creates an empty TwoExpressionSectionSet item that contains
a
Section
section
and two corresponding expressions
License requirements: None.
- createEndCutBuilder(EndCut) - Method in interface nxopen.features.ShipCollection
-
Creates a
EndCutBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createEndToStart() - Method in interface nxopen.weld.WeldBeadPathBuilder
-
Returns the indication if the sweep should be created from the edge location to the start location.
- createEngineeringObjectAndMap(NXObject) - Method in interface nxopen.ame.LineDesignerMappingBuilder
-
Creates a new automation designer object and maps it to a line designer object.
- createEngineeringObjectAndMap(NXObject[]) - Method in interface nxopen.ame.LineDesignerMappingBuilder
-
Creates new automation designer objects and maps them to line designer objects in bulk.
- createEngineeringObjectAndMapLdObject(NXObject) - Method in interface nxopen.ame.AMEManager
-
Create an eo and map it to a LD object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createEngineeringObjectBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
EngineeringObjectBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createEngineeringObjectDefinitionLabelBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createEngObjectDefinitionBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- CreateEngObjectDefinitionBuilder - Interface in nxopen.ame
-
- createEngravingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a planar milling text operation builder
License requirements: cam_base ("CAM BASE")
.
- createEnlarge(Tag, int, String[], double) - Method in interface nxopen.uf.UFModlFeatures
-
- createEnlargeBuilder(Enlarge) - Method in interface nxopen.features.FeatureCollection
-
Creates an Enlarge builder
License requirements: nx_freeform_2 ("advanced freeform modeling")
.
- createEnlargeSurfaceBuilder() - Method in interface nxopen.tooling.EnlargeSurfaceCollection
-
Creates a Enlarge Surface builder
License requirements: None.
- createEnterpriseIdentificationBuilder(EnterpriseIdentification) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createEntryPoint() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns a flag to indicate if an entry point is required
License requirements: None.
- createEnvelope(IPostControl, NXObject, boolean, NXObject, NXObject[], int, int, PostProcess.EnvelopeTolerance) - Method in interface nxopen.motion.PostProcess
-
Creates envelopes for the given objects
License requirements: mechanisms ("MECHANISMS")
.
- CreateEnvelopeData() - Constructor for class nxopen.motion.PostProcess.CreateEnvelopeData
-
- createEnvironmentBuilder(View, boolean) - Method in interface nxopen.ViewCollection
-
Creates a
EnvironmentBuilder
License requirements: studio_render ("UG STUDIO RENDER")
Created in NX10.0.2
- createEplanImportProjectTemplateBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createEplanProjectGenerationBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a builder for the EPLAN project generation dialog
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createEplanProjectTemplateAndStructureBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates an EplanProjectTemplateAndStructureBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createEplanSettingsBuilder(Part, AMEBaseNode) - Method in interface nxopen.ame.AMEManager
-
Creates an EplanSettingsBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createEplanStructureIdentifierOrderBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createEqualLengthConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates an equal length constraint.
- createEqualRadiusConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates an equal radius constraint.
- createEquipmentBuilder(Part, Equipment) - Method in interface nxopen.pid.PidManager
-
- createEvaluatorCopyToBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
EvaluatorCopyToBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createEventBuilder(RSEvent) - Method in interface nxopen.cae.responsesimulation.RSEventCollection
-
Creates a event buider
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createEventfatiguesettingsBuilder(DurabilityFatigue) - Method in interface nxopen.cae.DurabilityFatigueCollection
-
Creates the builder object of durability event fatigue settings.
- createEventoverridesBuilder(DurabilitySolveOptions) - Method in interface nxopen.cae.DurabilitySolveOptionsCollection
-
Creates the builder object of durability event overrides.
- createEventSolverBuilder(DurabilityEvent) - Method in interface nxopen.cae.DurabilityManager
-
Creates a builder for a durability event solver.
- createEventstrengthsettingsBuilder(DurabilityStrength) - Method in interface nxopen.cae.DurabilityStrengthCollection
-
Creates the builder object of durability event strength settings.
- createEwdraftingBuilder() - Method in interface nxopen.tooling.ElectrodeDesignCollection
-
Creates Electrode Drafting builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- createEwmultiPositionBuilder() - Method in interface nxopen.tooling.EWMultiPositionCollection
-
Creates EW multi-position builder
License requirements: None.
- createExamineGeometryObject() - Method in interface nxopen.geometricanalysis.AnalysisManager
-
Creates an examine geometry object
License requirements: None.
- createExamineSteelFeatureBuilder() - Method in interface nxopen.features.ShipCollection
-
- createExcessMaterialBuilder(ExcessMaterial) - Method in interface nxopen.features.ShipCollection
-
Creates a
ExcessMaterialBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX7.5.0
- createExciterConfigBuilder(PreTestExciterConfig) - Method in interface nxopen.cae.PreTestSolutionCollection
-
Creates a exciter configuration dialog builder
License requirements: nx_correl_base ("FE Correlation")
.
- createExclusionZoneBuilder(AdaptivityExclusionZone) - Method in interface nxopen.cae.AdaptivityExclusionZoneCollection
-
Creates the builder object of adaptivity exclusion zone.
- createExclusiveOrDofset(String, CaeDOFSet[]) - Method in interface nxopen.cae.CaeDOFSetCollection
-
Create a XOR of DOFSets
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createExclusiveOrGroup(String, CaeGroup[]) - Method in interface nxopen.cae.CaeGroupCollection
-
Create a XOR of Groups
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createExitPoint() - Method in interface nxopen.cam.InspectionPathBuilder
-
Returns a flag to indicate if an exit point is required
License requirements: None.
- createExp(String) - Method in interface nxopen.uf.UFModlGeneral
-
- createExpansionDrawingBuilder(ExpansionDrawing) - Method in interface nxopen.features.ShipCollection
-
- createExplicitOrderBuilder() - Method in interface nxopen.annotations.PmiManager
-
- createExplicitSearchTerm(SearchTerm.SearchTermLogicType, SearchResultElement) - Method in interface nxopen.assemblies.SubsetRecipe
-
Creates a
ExplicitSearchTerm
and
adds it to the recipe at the end of the list of search terms.
- createExplicitSearchTermGroup(SearchTerm.SearchTermLogicType, SearchResultElement[]) - Method in interface nxopen.assemblies.SubsetRecipe
-
- createExplosion(Tag, String) - Method in interface nxopen.uf.UFAssem
-
- createExportBuilder() - Method in interface nxopen.tooling.SIZERCollection
-
Creates a
SIZERExportBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX7.5.0
- createExportComponentHierarchyBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
- createExportControlBuilder(ExportControl) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createExportData() - Method in interface nxopen.fields.FieldManager
-
Creates a Fields.ExportData
License requirements: None.
- createExportEclassMappingBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createExportFlatPatternBuilder() - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
ExportFlatPatternBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
Created in NX8.0.0
- createExportSensorsActuatorsBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createExportSubdivisionGeometryBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createExportUnvBuilder() - Method in interface nxopen.cae.PreTestSolution
-
Creates a pre-test export Unv builder
License requirements: nx_correl_base ("FE Correlation")
.
- createExportWeldBuilder() - Method in interface nxopen.weld.WeldManager
-
- createExportWeldJointBuilder() - Method in interface nxopen.weld.WeldManager
-
- createExportWorksetForReferenceBuilder(BasePart) - Method in interface nxopen.pdm.PdmSession
-
- createExpression(String, String) - Method in interface nxopen.ExpressionCollection
-
Creates an expression of the specified type.
- createExpressionBlockBuilder(ExpressionBlockObject) - Method in interface nxopen.mechatronics.ExpressionBlockCollection
-
- createExpressionBlockFormulaBuilder(ExpressionBlockFormula) - Method in interface nxopen.mechatronics.ExpressionBlockFormulaCollection
-
- createExpressionCollectorSet(ScCollector, String, String, int) - Method in interface nxopen.Part
-
Creates an ExpressionCollectorSet item that contains a
ScCollector
collection
and a corresponding expression
License requirements: None.
- createExpressionSectionSet(Section, String, String, int) - Method in interface nxopen.Part
-
Creates an ExpressionSectionSet item that contains a
Section
collection
and a corresponding expression
License requirements: None.
- createExpTag(String) - Method in interface nxopen.uf.UFModlGeneral
-
- createExtendSection() - Method in interface nxopen.die.AddendumSectionBuilder
-
Creates a
Section
object containing the extended constraint curve.
- createExtendSheetBuilder(ExtendSheet) - Method in interface nxopen.features.TrimFeatureCollection
-
Creates a
ExtendSheetBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- createExtensionBuilder(Extension) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ExtensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
Created in NX8.0.0
- createExternalConnectionBuilder(ExternalConnection) - Method in interface nxopen.mechatronics.ExternalConnectionCollection
-
- createExternalConnectionElementBuilder(ExternalConnectionElement) - Method in interface nxopen.mechatronics.ExternalConnectionCollection
-
- createExternalSignalConfigurationBuilder(ExternalSignalConfigurationObject) - Method in interface nxopen.mechatronics.ExternalSignalConfigurationCollection
-
- createExtractAttributeBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates an extract attribute builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createExtractCagePolylineBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createExtractedCurve(ICurve, int, int, Xform, double, SmartObject.UpdateOption) - Method in interface nxopen.CurveCollection
-
- createExtractFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ExtractFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX5.0.0
- createExtractPort(Port) - Method in interface nxopen.routing.PortCollection
-
- createExtractPort(Port, boolean) - Method in interface nxopen.routing.PortCollection
-
- createExtractScene(View) - Method in interface nxopen.ViewCollection
-
- createExtractXform(NXObject, SmartObject.UpdateOption, boolean) - Method in interface nxopen.XformCollection
-
Creates an extract Xform based on an object.
- CreateExtractXformData() - Constructor for class nxopen.XformCollection.CreateExtractXformData
-
- createExtrudeBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Extrude builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createExtruded(Tag[], String, String[], double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createExtruded1(Tag[], String, String[], double[], double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- createExtruded2(Tag[], String, String[], double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createExtrudedPath(Tag[], Tag[], double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createExtrudedPath1(Tag[], Tag[], double[], double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- createExtrudeFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
ExtrudeFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
- createExtrudeProfileBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
ExtrudeProfileBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
- createExtrudeSweptPreview() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the option to turn on or off the preview for Extrude or Swept parting surface
License requirements: None.
- createExtrudeTrimOpts(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createExtrudeTrimOpts1(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- CreateExtrudeTrimOpts1Data() - Constructor for class nxopen.uf.UFModl.CreateExtrudeTrimOpts1Data
-
- CreateExtrudeTrimOptsData() - Constructor for class nxopen.uf.UFModl.CreateExtrudeTrimOptsData
-
- createExtrusion(Tag[], int, UFModl.SweepTrimObject, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createExtrusion1(Tag[], int, UFModl.SweepTrimObject, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- CreateExtrusion1Data() - Constructor for class nxopen.uf.UFModl.CreateExtrusion1Data
-
- createExtrusion2(Tag[], int, UFModl.SweepTrimObject, String, String[], String[], double[], boolean, boolean, double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- CreateExtrusion2Data() - Constructor for class nxopen.uf.UFModl.CreateExtrusion2Data
-
- CreateExtrusionData() - Constructor for class nxopen.uf.UFModl.CreateExtrusionData
-
- createExtrusionDefault(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, Tag, boolean, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createExtrusionDefault1(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, Tag, boolean, UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- CreateExtrusionDefault1Data() - Constructor for class nxopen.uf.UFModl.CreateExtrusionDefault1Data
-
- CreateExtrusionDefaultData() - Constructor for class nxopen.uf.UFModl.CreateExtrusionDefaultData
-
- createExtrusionDir(Tag[], int, UFModl.SweepTrimObject, UFModl.SweepTrimOpts, String, String[], String[], double[], boolean, boolean, Tag, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- CreateExtrusionDirData() - Constructor for class nxopen.uf.UFModl.CreateExtrusionDirData
-
- createExtrusionPath(Tag[], int, Tag[], int, UFModl.SweepTrimObject, String[], double[], boolean, boolean, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createExtrusionPath1(Tag[], int, Tag[], int, UFModl.SweepTrimObject, String[], double[], boolean, boolean, UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- CreateExtrusionPath1Data() - Constructor for class nxopen.uf.UFModl.CreateExtrusionPath1Data
-
- CreateExtrusionPathData() - Constructor for class nxopen.uf.UFModl.CreateExtrusionPathData
-
- CreateFabricationBuilder - Interface in nxopen.routing
-
- createFabricationBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Creates a
CreateFabricationBuilder
which fabricate subassembly from standard parts, path segments, stock, and other routing objects within the current routing assembly
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX8.0.0
- createFaceAnnotationBuilder() - Method in interface nxopen.formboard.FormboardManager
-
Creates a
FaceAnnotationBuilder
object for importing
CGM or Pattern file geometry and placing it on a drawing sheet or model view.
- createFaceAttributeBuilder() - Method in interface nxopen.tooling.ManufacturingGeometryCollection
-
Creates a FaceAttribute builder.
- createFaceAxis(IParameterizedSurface, SmartObject.UpdateOption) - Method in interface nxopen.LineCollection
-
Create a Axis line base on a Cylider, Cone, Torus or Revolve face
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createFaceAxisNoExtension(IParameterizedSurface, SmartObject.UpdateOption) - Method in interface nxopen.LineCollection
-
Create a Axis line base on a Cylider, Cone, Torus or Revolve face.
- createFaceAxisNoParentLoadRequired(IParameterizedSurface, SmartObject.UpdateOption) - Method in interface nxopen.LineCollection
-
Create a Axis line base on a Cylider, Cone, Torus or Revolve face.
- createFaceBlendBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Face Blend feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createFaceCharacteristicsBuilder() - Method in interface nxopen.features.ShipCollection
-
- createFaceClearanceCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating face clearance check builder in a
FemPart
part.
- createFaceColorManagementBuilder() - Method in interface nxopen.tooling.FaceColorManagementCollection
-
Creates face color management builder.
- createFaceConstraint(UFModl.DfoRegion, UFModl.DfoConstraint) - Method in interface nxopen.uf.UFModlFeatures
-
- createFaceCurvatureAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a face curvature analysis builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- createFaceFaceImprintBuilder() - Method in interface nxopen.cae.AbstractionManager
-
- createFaceFromBoundaryBuilder() - Method in interface nxopen.cae.AbstractionManager
-
Creates a
FaceFromBoundaryBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX8.5.0
- createFaceMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a planar milling facing operation builder
License requirements: cam_base ("CAM BASE")
.
- createFaceOffset(String, Tag[]) - Method in interface nxopen.uf.UFModeling
-
- createFacePair() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Create or edit a face pair from selected side1 and side2 faces
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFacePairs() - Method in interface nxopen.cae.AutoPairs
-
Create face pairs whose distance is less than the distance tolerance stored
in the recipe.
- CreateFacePairsData() - Constructor for class nxopen.cae.AutoPairs.CreateFacePairsData
-
- createFacePercentageListItem() - Method in interface nxopen.features.PointSetBuilder
-
Create an entry for the face percentage list.
- createFaceSet(String, ScCollector, boolean, int) - Method in interface nxopen.geometricutilities.FaceSetOffsetCollection
-
Creates an offset face set.
- createFaceSplitBuilder() - Method in interface nxopen.tooling.FaceSplitCollection
-
- createFacetAdjustMinimumRadiusBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
- createFaceTaper(double[], double[], String, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createFacetBody(Body[]) - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a JT
FacetedBody
using the default faceting tolerances.
- CreateFacetBodyData() - Constructor for class nxopen.facet.FacetedBodyCollection.CreateFacetBodyData
-
- createFacetBodyFromBodyBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
- createFacetBodyFromFaces(Face[]) - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a JT
FacetedBody
using the default faceting tolerances.
- createFacetCurvatureBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
- createFacetFeatureExtractionBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
- createFacets() - Method in interface nxopen.die.SpringbackCompensationBuilder
-
Returns the value determines if a faceted output body is also created.
- createFacetSettingsBuilder() - Method in interface nxopen.BasePart
-
Creates a builder for the Facet Settings dialog
License requirements: None.
- CreateFactoryElement - Interface in nxopen.linedesigner
-
- CreateFactoryElementBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.CreateFactoryElement
builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createCreateFactoryElementBuilder
Default values.
- CreateFactoryElementBuilder.TypeAPI - Class in nxopen.linedesigner
-
This enum is providing possible element types
- createFamily(UFFam.FamilyData) - Method in interface nxopen.uf.UFFam
-
- createFamilyInstance(Tag, int) - Method in interface nxopen.uf.UFPart
-
- CreateFamilyInstanceData() - Constructor for class nxopen.uf.UFPart.CreateFamilyInstanceData
-
- createFamilyMoldBuilder() - Method in interface nxopen.tooling.FamilyMoldCollection
-
Creates a Mold Wizard Family Mold builder
License requirements: None.
- createFastenerConstraints(int) - Method in interface nxopen.tooling.FastenerAssy
-
Creates fastener assembly constraint
License requirements: None.
- createFastenerRemoveNodeBuilder() - Method in interface nxopen.tooling.FastenerRemoveNodeCollection
-
Creates a FastenerRemoveNode builder
License requirements: None.
- createFcf(FcfData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.FcfCollection
-
Creates an FCF
License requirements: geometric_tol ("GDT")
.
- createFeature(NXObject[]) - Method in interface nxopen.cam.fbm.FeatureSet
-
Creates the feature using the specified tags
License requirements: cam_base ("CAM BASE")
.
- createFeature() - Method in interface nxopen.MeasureAngle
-
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeature() - Method in interface nxopen.MeasureBodies
-
Creates and returns a measurement feature to obtain mass properties of solid bodies
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeature() - Method in interface nxopen.MeasureDistance
-
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeature() - Method in interface nxopen.MeasureFaces
-
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeature() - Method in interface nxopen.MeasureLength
-
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeature() - Method in interface nxopen.MeasurePoint
-
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeature() - Method in interface nxopen.MeasurePolarAngle
-
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeature() - Method in interface nxopen.MeasurePolarArea
-
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeature() - Method in interface nxopen.MeasurePolarRadius
-
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeature() - Method in interface nxopen.MeasureRectangularExtreme
-
Creates and returns a measurement feature
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeatureBasedGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a manufacturing feature based geometry builder
License requirements: cam_base ("CAM BASE")
.
- createFeatureControlFrameDataBuilder(FeatureControlFrameData) - Method in interface nxopen.annotations.AnnotationManager
-
- createFeatureControlFrameIndicatorBuilder() - Method in interface nxopen.annotations.AnnotationManager
-
- createFeatureEdgeNodeMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureEdgeNodeMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureEdgeNodeMethod(FEElemEdge[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureEdgeNodeMethod(FEElemEdge[], boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureEdgeNodeMethod(FEElemEdge[], boolean, boolean, boolean, Type, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a feature edge node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFeatureElemEdgeMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemEdgeMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemEdgeMethod(FEElemEdge[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemEdgeMethod(FEElemEdge[], boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemEdgeMethod(FEElemEdge[], boolean, boolean, boolean, Type, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a feature elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFeatureElemEdgeMethod(Mesh[], boolean, boolean, boolean, Type, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a feature elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFeatureElemFaceMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemFaceMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemFaceMethod(FEElemFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemFaceMethod(FEElemFace[], boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemFaceMethod(FEElemFace[], boolean, boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a feature elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFeatureElemMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemMethod(FEElemFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemMethod(FEElemFace[], boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureElemMethod(FEElemFace[], boolean, boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a feature elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFeatureGeneralPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
-
Create the FeatureGeneralPropertiesBuilder
License requirements: None.
- createFeatureGeometryCallback(CustomFeatureCreateFeatureGeometryEvent) - Method in interface nxopen.features.CustomFeatureClass.CreateFeatureGeometryCallback
-
Prototype for create feature geometry callbacks
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createFeatureGroupBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a feature group geometry builder
License requirements: cam_base ("CAM BASE")
.
- createFeatureGroups() - Method in interface nxopen.cam.GroupFeatures
-
Create the feature groups
License requirements: cam_base ("CAM BASE")
.
- createFeatureGroups() - Method in interface nxopen.weld.WeldImportBuilder
-
Returns the option to create Feature Group features to collect Weld Point features that have the same connected part combinations.
- createFeatureGroupsForCommonConnectedParts(JointmarkElement[]) - Method in interface nxopen.weld.CustomManager
-
Method to creates Feature Groups to collect individual weld point features that have the same connected part attributes.
- createFeatureIdBusinessModifierBuilder(FeatureIdBusinessModifier) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- createFeatureMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a planar milling hole (feature based) operation builder
License requirements: cam_base ("CAM BASE")
.
- createFeatureNodeMethod(FEElement, int, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureNodeMethod(FEElement[], int[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureNodeMethod(FEElemFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureNodeMethod(FEElemFace[], boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureNodeMethod(FEElemFace[], boolean, boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a feature node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFeatureOffset(String, Tag[]) - Method in interface nxopen.uf.UFModeling
-
- createFeatureProcessBuilder() - Method in interface nxopen.cam.CAMSetup
-
Creates a CAM.FeatureProcessBuilder
License requirements: ug_holemaking ("UG Holemaking")
Created in NX7.5.0
- createFeatureProcesses(CAMFeature[]) - Method in interface nxopen.cam.FeatureProcessBuilder
-
Creates operations for a set of features based of the current setting of the builder
License requirements: ug_holemaking ("UG Holemaking")
.
- CreateFeatureProcessesData() - Constructor for class nxopen.cam.FeatureProcessBuilder.CreateFeatureProcessesData
-
- createFeatureProperties() - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesListBuilder
-
Create a feature properties.
- createFeatureRecognitionBuilder(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Creates a CAM.FeatureRecognitionBuilder
License requirements: cam_base ("CAM BASE")
Created in NX6.0.0
- createFeatureReferenceSetBuilder() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates Featrue Reference Set builder.
- createFeatureReplayBuilder() - Method in interface nxopen.features.FeatureCollection
-
Creates a
FeatureReplayBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createFeatures(NXObject[], String) - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Create a series of (in process) features.
- createFeaturesBatchOperationBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
FeaturesBatchOperationBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.5.0
- createFeatureSet() - Method in interface nxopen.cam.fbm.FeatureGeometry
-
Create a new empty feature editor
License requirements: cam_base ("CAM BASE")
.
- createFeatureSet(int) - Method in interface nxopen.weld.AutoPointBuilder
-
Creates a feature set containing weld points for a given interference.
- createFeatureShellElemMethod(FEElement, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureShellElemMethod(FEElement[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureShellElemMethod(FEElement[], boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFeatureShellElemMethod(FEElement[], boolean, boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a feature shell elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFeaturesToMarkBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
FeaturesToTagBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createFeatureTaper(double[], double[], String, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createFeatureTeaching(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Creates a CAM.FeatureTeaching
License requirements: cam_base ("CAM BASE")
Created in NX8.0.0
- createFedrat(UFVariant, double, String) - Method in interface nxopen.uf.UFPath
-
- createFeedsBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Create Feeds builder.
- createFeedsOptimizeBuilder(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Creates a feeds optimize builder
License requirements: cam_base ("CAM BASE")
.
- createFem(String, Tag, String, boolean, int, Tag[], String, String, int, String[]) - Method in interface nxopen.uf.UFSf
-
- createFemWithGeomOpts(String, Tag, String, boolean, int, Tag, String, String, int, String[], UFSf.GeomOptions) - Method in interface nxopen.uf.UFSf
-
- CreateFence - Interface in nxopen.linedesigner
-
Represents a create fence
To create or edit an instance of this class, use
CreateFenceBuilder
Created in NX9.0.0
- CreateFenceBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.CreateFence
builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createCreateFenceBuilder
Created in NX9.0.0
- createFiberOrientationOptionsBuilder() - Method in interface nxopen.cae.LaminateGlobalLayup
-
- createField() - Method in interface nxopen.cae.ThicknessBuilder
-
The field creation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFieldData(Field) - Method in interface nxopen.motion.FieldDataCollection
-
- createFieldExpression(String, Unit) - Method in interface nxopen.fields.FieldManager
-
- createFieldExpression(String, Unit, FieldVariable[]) - Method in interface nxopen.fields.FieldManager
-
- createFieldFormula(String, FieldVariable[], FieldExpression[]) - Method in interface nxopen.fields.FieldManager
-
- createFieldLink(String, Field) - Method in interface nxopen.fields.FieldManager
-
- createFieldLinksTable(String, FieldVariable[], FieldVariable[], double[], Field[]) - Method in interface nxopen.fields.FieldManager
-
- createFieldLinksTable(String, FieldVariable[], FieldVariable[], double[], Field[], boolean[]) - Method in interface nxopen.fields.FieldManager
-
- createFieldOption() - Method in interface nxopen.cae.PostGraphBuilder
-
Returns the option to create field of the across iteration graph created by expression
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- createFieldTable(String, FieldVariable[], FieldVariable[], double[]) - Method in interface nxopen.fields.FieldManager
-
- createFieldTableFromData(String, Unit, Unit, FieldVariable.ValueType, double[]) - Method in interface nxopen.fields.FieldManager
-
- createFieldWrapper(Field) - Method in interface nxopen.fields.FieldManager
-
Create a field wrapper backed up by a field
License requirements: None.
- createFile(String) - Method in interface nxopen.markup.MarkupFileCollection
-
Adds a
File
License requirements: None.
- createFilebox(String, String, String, String) - Method in interface nxopen.uf.UFUi
-
- CreateFileboxData() - Constructor for class nxopen.uf.UFUi.CreateFileboxData
-
- createFileboxWithMultipleFilters(String, String, String[], int, String) - Method in interface nxopen.uf.UFUi
-
- CreateFileboxWithMultipleFiltersData() - Constructor for class nxopen.uf.UFUi.CreateFileboxWithMultipleFiltersData
-
- createFilenewapplicationBuilder() - Method in interface nxopen.pid.PidManager
-
Creates a
FileNewApplicationBuilder
License requirements: nx_pid_design_author ("NX P and ID Design Author")
Created in NX11.0.0
- createFillAreaBuilder(FillArea) - Method in interface nxopen.die.DieCollection
-
- createFillBuilder(Fill) - Method in interface nxopen.weld.WeldManager
-
- createFillerStockBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Creates a
FillerStockBuilder
License requirements: routing_harness ("Routing Harness")
Created in NX6.0.0
- createFillet(int, Tag[], double[], double, int[], int[]) - Method in interface nxopen.uf.UFCurve
-
- createFilletBuilder(Feature) - Method in interface nxopen.weld.WeldManager
-
- createFilletFaceMethod(CAEBody, RadiusType, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFilletFaceMethod(CAEBody[], RadiusType, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFilletFaceMethod(CAEBody[], boolean, RadiusType, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a fillet face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFilletFaceMethod(CAEFace[], RadiusType, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createFilletFaceMethod(CAEFace[], boolean, RadiusType, double, double, double, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a fillet face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createFillHoleBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
FillHoleBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
- createFillHoleBuilder(FillHole) - Method in interface nxopen.features.FreeformSurfaceCollection
-
Creates a
FillHoleBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- createFilter(String, String) - Method in interface nxopen.routing.electrical.ElectricalNavigatorFilterCollection
-
- createFilter(Tag, String, String, Tag) - Method in interface nxopen.uf.UFFltr
-
- createFilterBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
FilterBuilder
which is used during selection
to allow for filtering ship objects with the same property settings.
- createFinalLift(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- createFindByAttributesBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
FindByAttributesBuilder
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX8.5.0
- createFingerClearanceNotchBuilder(FingerClearanceNotch) - Method in interface nxopen.die.DieCollection
-
- createFinishTurningBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a finish turning operation builder
License requirements: cam_base ("CAM BASE")
.
- createFirstCut(UFVariant, double[], double[]) - Method in interface nxopen.uf.UFDrpos
-
- createFitCurveBuilder(FitCurve) - Method in interface nxopen.features.FeatureCollection
-
Creates a
FitCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
- createFitSurfaceBuilder(FitSurface) - Method in interface nxopen.features.FeatureCollection
-
Creates a
FitSurfaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX8.5.0
- createFittingOverstockBuilder(FittingOverstock) - Method in interface nxopen.routing.RouteManager
-
- createFittingPoints() - Method in interface nxopen.tooling.ChannelFittingBuilder
-
Create Fitting Points.
- createFittingPort(Point3d, Vector3d, Vector3d, DisplayableObject, double) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with a rotation vector at an absolute location.
- createFittingPort(Point3d, Vector3d) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with no rotation vector at an absolute location.
- createFittingPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Point) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with a rotation vector at a point.
- createFittingPort(Point3d, Vector3d, Point) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with no rotation vector at a point.
- createFittingPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Axis) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with a rotation vector on an axis.
- createFittingPort(Point3d, Vector3d, Axis) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with no rotation vector on an axis.
- createFittingPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, boolean) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with a rotation vector at an absolute location
License requirements: routing_base ("Routing Basic")
.
- createFittingPort(Point3d, Vector3d, boolean) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with no rotation vector at an absolute location
License requirements: routing_base ("Routing Basic")
.
- createFittingPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Point, boolean) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with a rotation vector at a point
License requirements: routing_base ("Routing Basic")
.
- createFittingPort(Point3d, Vector3d, Point, boolean) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with no rotation vector at a point
License requirements: routing_base ("Routing Basic")
.
- createFittingPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Axis, boolean) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with a rotation vector on an axis
License requirements: routing_base ("Routing Basic")
.
- createFittingPort(Point3d, Vector3d, Axis, boolean) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a FittingPort with no rotation vector on an axis
License requirements: routing_base ("Routing Basic")
.
- createFittings() - Method in interface nxopen.tooling.SpecifyCircuitBuilder
-
Returns the value which specifies whether to add fittings or not.
- createFixedBuilder(Fixed) - Method in interface nxopen.features.FeatureCollection
-
Creates a
FixedBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX7.0.0
- createFixedConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a fixed constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createFixedDatumAxis(Point3d, Point3d) - Method in interface nxopen.DatumCollection
-
Creates a fixed datum axis
Note: start and end only specify the
origin and start direction of the datum axis.
- createFixedDatumPlane(Point3d, Matrix3x3) - Method in interface nxopen.DatumCollection
-
Creates a fixed datum plane
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createFixedDaxis(double[], double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createFixedDplane(double[], double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createFixedJoint(Link) - Method in interface nxopen.motion.LinkCollection
-
Creates a
Joint
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createFixedJointBuilder(FixedJoint) - Method in interface nxopen.mechatronics.FixedJointCollection
-
- createFixedPlane(Point3d, Matrix3x3) - Method in interface nxopen.PlaneCollection
-
Creates a
Plane
without parameters.
- createFixedPlane(Point3d, Matrix3x3, boolean) - Method in interface nxopen.PlaneCollection
-
Creates a
Plane
without parameters.
- createFixedTypePlane(Point3d, Matrix3x3, SmartObject.UpdateOption) - Method in interface nxopen.PlaneCollection
-
Creates a
Plane
, it is still a smart plane but has fixed plane type.
- createFixturePort(Point3d, Vector3d, Vector3d, DisplayableObject, double) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with a rotation vector at an absolute location.
- createFixturePort(Point3d, Vector3d) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with no rotation vector at an absolute location.
- createFixturePort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Point) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with a rotation vector at a point.
- createFixturePort(Point3d, Vector3d, Point) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with no rotation vector at a point.
- createFixturePort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Axis) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with a rotation vector on an axis.
- createFixturePort(Point3d, Vector3d, Axis) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with no rotation vector on an axis.
- createFixturePort(Point3d, Vector3d, Vector3d, DisplayableObject, double, boolean) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with a rotation vector at an absolute location
License requirements: routing_base ("Routing Basic")
.
- createFixturePort(Point3d, Vector3d, boolean) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with no rotation vector at an absolute location
License requirements: routing_base ("Routing Basic")
.
- createFixturePort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Point, boolean) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with a rotation vector at a point
License requirements: routing_base ("Routing Basic")
.
- createFixturePort(Point3d, Vector3d, Point, boolean) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with no rotation vector at a point
License requirements: routing_base ("Routing Basic")
.
- createFixturePort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Axis, boolean) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with a rotation vector on an axis
License requirements: routing_base ("Routing Basic")
.
- createFixturePort(Point3d, Vector3d, Axis, boolean) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a FixturePort with no rotation vector on an axis
License requirements: routing_base ("Routing Basic")
.
- createFlange(double[], double[], double[], Tag, Tag, String, String, String, String, String, String, String, int, int, int) - Method in interface nxopen.uf.UFModlSmd
-
- createFlangeBendProperties() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesListBuilder
-
Create a flange properties.
- createFlangeBuilder(Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
-
Create flange builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- createFlangeFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Flange feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createFlatPattern(String, int, Tag) - Method in interface nxopen.uf.UFSmd
-
- createFlatPatternBuilder(Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
-
Creates a
FlatPatternBuilder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
Created in NX6.0.0
- createFlatPatternBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Flat Pattern feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createFlatPatternsBuilder() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Creates a
FlatPatternsBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX6.0.0
- createFlatSolidBuilder(Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
-
Create flat solid builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- createFlatSolidFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Flat Solid feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createFlatteningAndFormingBuilder(FlatteningAndForming) - Method in interface nxopen.features.FreeformSurfaceCollection
-
- createFlatteningAndFormingBuilderEx(FlatteningAndForming) - Method in interface nxopen.features.FreeformSurfaceCollection
-
- createFlatteningBuilder() - Method in interface nxopen.BodyCollection
-
- createFlexBodyBuilder(FlexBody) - Method in interface nxopen.motion.FlexBodyCollection
-
Creates a
FlexBodyBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX7.5.0
- createFlexibleCableBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
FlexibleCableBuilder
License requirements: nx_flexible_pcb ("NX Flexible PCB")
Created in NX6.0.0
- createFlipComponentBuilder() - Method in interface nxopen.formboard.FormboardManager
-
Creates a
FlipComponentBuilder
object for
flipping of formboard component about an axis orthogonal to Z axis to ensure that
after flipping component lies in XY plane.
- createFloor() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide if the floor of the post should be created
License requirements: None.
- createFlowAnalysisBuilder() - Method in interface nxopen.tooling.MoldDesignCollection
-
Creates flow analysis builder
License requirements: ug_mold_design ("UG MOLD")
.
- createFlowBlendBuilder(FlowBlend) - Method in interface nxopen.features.FeatureCollection
-
Creates a
FlowBlendBuilder
License requirements: flow_blend_for_nx (" Flow Blend"), solid_modeling ("SOLIDS MODELING")
Created in NX10.0.0
- createFlowDirectionArrowBuilder(Part, FlowDirectionArrow) - Method in interface nxopen.pid.PidManager
-
- createFlowDisplayBuilder(DisplayableObject) - Method in interface nxopen.tooling.MoldDesignCollection
-
Creates flow display builder
License requirements: ug_mold_design ("UG MOLD")
.
- createFlush(UFVariant, UFPath.Flush, String) - Method in interface nxopen.uf.UFPath
-
- createFlushTank(UFVariant, UFPath.TankType, String) - Method in interface nxopen.uf.UFPath
-
- createFolded() - Method in interface nxopen.drawings.SectionViewBuilder
-
Returns the create folded
License requirements: None.
- createFoldedradiusDim(UFDrf.Object, UFDrf.Object, double[], double, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createFoldedRadiusDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a folded radius dimension
License requirements: drafting ("DRAFTING")
.
- createFolder(String) - Method in interface nxopen.cae.connections.Folder
-
Creates a
Folder
in this folder with the specified name
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- createFolder(String, SimLbcFolder.Type, SimLbcFolder) - Method in interface nxopen.cae.SimLbcFolderCollection
-
Creates a lbc folder of the specified type, and optional makes it a subfolder if a parent folder is specified.
- createFollowCurveMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create Follow Curve Move.
- createFollowPartMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create Follow Part Move.
- createForceCalculationBuilder() - Method in interface nxopen.tooling.ForceCalculationCollection
-
Creates force calculation builder
License requirements: None.
- createForceTorqueControlBuilder(ForceTorqueControl) - Method in interface nxopen.mechatronics.ForceTorqueControlCollection
-
- createFormat(String, ElectricalFormat.Type) - Method in interface nxopen.routing.electrical.ElectricalFormatCollection
-
- createFormboardFrameByRectangle(Point, Scalar, Scalar) - Method in interface nxopen.routing.FormboardFrameCollection
-
Creates a
FormboardFrame
object
using a rectangle defined by a
Point
object and
two
Scalar
objects that represent the height and width.
- createFormingInsert() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Create forming insert
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- createFormingInsertBuilder() - Method in interface nxopen.tooling.FormingInsertCollection
-
Creates forming insert builder.
- createFormSheetBuilder(Part, FormSheetObject) - Method in interface nxopen.ame.AMEManager
-
Creates a
FormSheetBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createFormSheetSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
FormSheetSettingsBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createFormTbl(Tag) - Method in interface nxopen.uf.UFSmd
-
- createFormToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a form builder
License requirements: cam_base ("CAM BASE")
.
- createFourPointSurfaceBuilder() - Method in interface nxopen.BodyCollection
-
Creates a Four Point Surface Builder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- createFragmentBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
FragmentBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createFragmentToggle() - Method in interface nxopen.ame.CreateTemplateBuilder
-
Returns the template toggle for create fragment
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createFrameBarBuilder(FrameBar) - Method in interface nxopen.annotations.FrameBarCollection
-
If null create a new Frame bar, otherwise edit existing Frame bar Annotatation
License requirements: nx_ship_drafting ("Ship Drafting")
.
- createFrameBarObject() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Creates frame bar object
License requirements: nx_ship_drafting ("Ship Drafting")
.
- createFrameBarOutBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
FrameBarOutBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
- createFramedImage(String, UFDisp.ImageFormat, UFDisp.BackgroundColor, int[], int, int) - Method in interface nxopen.uf.UFDisp
-
- createFreeBodyResultsBuilder() - Method in interface nxopen.cae.ResultManager
-
Creates a free body results builder.
- createFreehand(Point2d[]) - Method in interface nxopen.markup.MarkupFileObjectCollection
-
Creates a
Freehand
License requirements: None.
- createFreeTransformerBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createFreezeGeometryBuilder(FreezeGeometryRecipe) - Method in interface nxopen.cae.GeometryRecipeCollection
-
- createFrenetDaxis(Tag, Tag, String, int) - Method in interface nxopen.uf.UFModlFeatures
-
- createFrfEvaluationSettingBuilder(FrfEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates FRF evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createFromAxis(Axis) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a fitting port based on an existing axis.
- createFromAxis(Axis) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a fixture port based on an existing axis.
- createFromCsys(CartesianCoordinateSystem, Port.CreateRotationVector) - Method in interface nxopen.routing.FittingPortCollection
-
Creates a fitting port based on an existing Cartesian Coordinate System.
- createFromCsys(CartesianCoordinateSystem, Port.CreateRotationVector) - Method in interface nxopen.routing.FixturePortCollection
-
Creates a fixture port based on an existing Cartesian Coordinate System.
- createFromDirs(int, String[]) - Method in interface nxopen.uf.UFDirpath
-
- createFromEnv(String) - Method in interface nxopen.uf.UFDirpath
-
- createFromSymbol(String) - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
Creates a new symbol from another symbol
License requirements: None.
- createFromTemplate(String, double[]) - Method in interface nxopen.uf.UFPlist
-
- createFromTemplate(String, double[]) - Method in interface nxopen.uf.UFTabnot
-
- createFtmFixedCurvesBuilder() - Method in interface nxopen.geometricutilities.OmnicadManager
-
Creates Free Transformer fixed curves builder.
- createFtmTransformCurvesBuilder() - Method in interface nxopen.geometricutilities.OmnicadManager
-
Creates Free Transformer transform curves builder.
- createFtmTransformPointsBuilder() - Method in interface nxopen.geometricutilities.OmnicadManager
-
Creates Free Transformer transform points builder.
- createFullyFixedConstraints(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates enough fixed constraints on the curve and all of its vertices such that the geometry is fully
fixed without any redundant fixed constraints.
- createFunction(UFMotion.Function) - Method in interface nxopen.uf.UFMotion
-
- createFunctionBuilder(Function) - Method in interface nxopen.cae.FunctionCollection
-
- createFunctionCallInstanceBuilder(Part, PlcBlock) - Method in interface nxopen.ame.AMEManager
-
Creates an function call instance builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createFunctionExcitationBuilder(DurabilityFunctionExcitation) - Method in interface nxopen.cae.DurabilityExcitationCollection
-
- createFunctionObjectBuilder(FunctionObject) - Method in interface nxopen.mechatronics.FunctionObjectCollection
-
Create builder for FunctionObject class
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- createGanttExportPlcopenBuilder(GanttOperationObject) - Method in interface nxopen.mechatronics.GanttCollection
-
- createGanttLinkerBuilder(GanttLinker) - Method in interface nxopen.mechatronics.GanttLinkerCollection
-
Creates a
GanttLinkerBuilder
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX10.0.0
- createGanttOperationBuilder(GanttOperationObject) - Method in interface nxopen.mechatronics.GanttCollection
-
Creates a
GanttOperationBuilder
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX7.5.1
- createGanttOperationConditionBuilder() - Method in interface nxopen.mechatronics.GanttCollection
-
- createGanttOperationParameterBuilder() - Method in interface nxopen.mechatronics.GanttCollection
-
- createGapDisplayBuilder() - Method in interface nxopen.routing.RouteManager
-
- createGapEadBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Gap EAD block.
- createGapEadBuilder(FEElement) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Gap EAD block and initializes it with the input element if defined.
- createGapFlushnessBuilder(GapFlushness) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a gap and flushness builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createGaps() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder
-
Returns the create gaps toggle on the TRACE LINES tab of the View Style Dialog
License requirements: None.
- createGapsStatus() - Method in interface nxopen.drawings.TraceLinesViewStyle
-
Returns the status of create gaps
License requirements: None.
- createGapsStatus() - Method in interface nxopen.preferences.TraceLinesViewPreferences
-
Returns the status of create gaps
License requirements: None.
- createGatewayGroupBuilder(Group) - Method in interface nxopen.BasePart
-
Creates a Groups builder
License requirements: None.
- createGdt(String[], Point3d, LetteringPreferences, UserSymbolPreferences, LineAndArrowPreferences, boolean, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
-
Creates a GDT symbol
License requirements: drafting ("DRAFTING")
.
- createGdtSymbol(int, String[], double[], UFDrf.LeaderType, UFDrf.LeaderAttachType, UFDrf.Object, double[], UFDrf.FrameCorner) - Method in interface nxopen.uf.UFDrf
-
- createGdtSymbolWithMultipleLeaders(int, String[], double[], UFDrf.GdtLeader, UFDrf.FrameCorner) - Method in interface nxopen.uf.UFDrf
-
- createGearBuilder(Gear) - Method in interface nxopen.mechatronics.GearCollection
-
- createGeneralAnnotationSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createGeneralArrangementViewBuilder(BaseView) - Method in interface nxopen.features.ShipCollection
-
- createGeneralBushing(UFMotion.GeneralBushing) - Method in interface nxopen.uf.UFMotion
-
- createGeneralCAMPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
-
Create the CAM.GeneralCAMPropertiesBuilder
License requirements: None.
- createGeneralConicBuilder(GeneralConic) - Method in interface nxopen.features.FeatureCollection
-
Creates a
GeneralConicBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX8.5.0
- createGeneralConnectionSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createGeneralCouplerBuilder(GeneralCoupler) - Method in interface nxopen.motion.GeneralCouplerCollection
-
- createGeneralGeometryBeamSectionBuilder(GeneralGeometryBeamSection) - Method in interface nxopen.cae.BeamSectionCollection
-
Creates a general geometry section builder.
- createGeneralInsertBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
- createGeneralNoteBuilder(GeneralNote) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createGenerateReportsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
GenerateReportsBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createGenericFileNewBuilder() - Method in interface nxopen.PartCollection
-
- createGenericPlateSystemBuilder(GenericPlateSystem) - Method in interface nxopen.features.ShipCollection
-
- createGenericSensorBuilder(GenericSensor) - Method in interface nxopen.mechatronics.GenericSensorCollection
-
- createGenericToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a generic solid tool builder
License requirements: cam_base ("CAM BASE")
.
- createGenericTrackingBuilder(SolidTrackPoint) - Method in interface nxopen.cam.Tool
-
Creates a Generic Trackpoint builder
License requirements: cam_base ("CAM BASE")
.
- createGeodesicChamferBuilder(GeodesicChamfer) - Method in interface nxopen.features.GeodesicSketchCollection
-
- createGeodesicCurves(int, Tag[], double[], double[], double, double) - Method in interface nxopen.uf.UFModlGeneral
-
- CreateGeodesicCurvesData() - Constructor for class nxopen.uf.UFModlGeneral.CreateGeodesicCurvesData
-
- createGeodesicDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createGeodesicFilletBuilder(GeodesicFillet) - Method in interface nxopen.features.GeodesicSketchCollection
-
Creates a
GeodesicFilletBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createGeodesicIntersectBuilder(GeodesicIntersect) - Method in interface nxopen.features.GeodesicSketchCollection
-
- createGeodesicLineBuilder(GeodesicLine) - Method in interface nxopen.features.GeodesicSketchCollection
-
Creates a
GeodesicLineBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createGeodesicOffsetBuilder(GeodesicOffset) - Method in interface nxopen.features.GeodesicSketchCollection
-
Creates a
GeodesicOffsetBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createGeodesicPointBuilder(GeodesicPoint) - Method in interface nxopen.features.GeodesicSketchCollection
-
Creates a
GeodesicPointBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createGeodesicProjectBuilder(GeodesicProject) - Method in interface nxopen.features.GeodesicSketchCollection
-
- createGeodesicResetBuilder() - Method in interface nxopen.features.GeodesicSketchCollection
-
Creates a
GeodesicResetBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createGeodesicSketchBuilder(GeodesicSketch) - Method in interface nxopen.features.GeodesicSketchCollection
-
Creates a
GeodesicSketchBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createGeodesicTrimBuilder(GeodesicSketch) - Method in interface nxopen.features.GeodesicSketchCollection
-
Creates a
GeodesicTrimBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createGeomcopyBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
GeomcopyBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createGeometricConstraint(Tag, UFSket.ConType, int, UFSket.ConGeom[]) - Method in interface nxopen.uf.UFSket
-
- createGeometricConstraintData() - Method in interface nxopen.features.GeometricConstraintDataManager
-
- createGeometricConstraintDataManager() - Method in interface nxopen.features.GeometricConstraintDataSetManager
-
- createGeometricMaps() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Perform geometric matching.
- createGeometricPropertiesObject() - Method in interface nxopen.geometricanalysis.AnalysisManager
-
Creates a geometric properties object
License requirements: None.
- createGeometry(NCGroup, String, String, NCGroupCollection.UseDefaultName, String) - Method in interface nxopen.cam.NCGroupCollection
-
Create a geometry group of the specified type and subtype under the parent group.
- createGeometry(NCGroup, CAMFeature[], String, String, NCGroupCollection.UseDefaultName, String) - Method in interface nxopen.cam.NCGroupCollection
-
Create geometry groups of the specified type and subtype under the parent group for the specified
manufacturing features.
- createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the create construction geometry flag.
- createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder
-
Returns the create construction geometry flag.
- createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderDetailBuilder
-
Returns the create construction geometry flag.
- createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactOPillarDetailBuilder
-
Returns the create construction geometry flag.
- createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactOtherRailDetailBuilder
-
Returns the create construction geometry flag.
- createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactRearHeaderDetailBuilder
-
Returns the create construction geometry flag.
- createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactRPillarDetailBuilder
-
Returns the create construction geometry flag.
- createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactSideRailDetailBuilder
-
Returns the create construction geometry flag.
- createGeometry() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofDetailBuilder
-
Returns the create construction geometry flag.
- createGeometryLocationData() - Method in interface nxopen.geometricutilities.GeometryLocationDataCollection
-
Creates geometry location data.
- createGeometrySet() - Method in interface nxopen.cam.Geometry
-
Create an empty geometry set
License requirements: cam_base ("CAM BASE")
.
- createGeometrySet(NXObject) - Method in interface nxopen.cam.SurfaceDriveGeometry
-
Create a new geometry set
License requirements: cam_base ("CAM BASE")
.
- createGlobalIlluminationBuilder() - Method in interface nxopen.ViewCollection
-
- createGlobalLayup() - Method in interface nxopen.cae.LaminateGlobalLayupCollection
-
Create a new
LaminateGlobalLayup
instance
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX7.5.0
- createGlobalLayupImportFromPptBuilder() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
- createGlobalSelectionBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a global selection builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createGlobalShapingBuilder(GlobalShaping) - Method in interface nxopen.features.FeatureCollection
-
Creates a
GlobalShapingBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createGmcopBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates GmcOp builder
License requirements: cam_base ("CAM BASE")
.
- createGougeCheckBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Create Gouge Check builder.
- createGovernmentSecurityInformationBuilder(GovernmentSecurityInformation) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createGraphAcrossIterationsBuilder(int) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating graphs of Postview result values across iterations.
- createGraphAcrossIterationsBuilder(int, int) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating graphs of two postview result values across iterations.
- createGraphAcrossIterationsBuilder(Result, ResultParameters) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating graphs across iterations of result values of result parameter.
- createGraphAcrossIterationsBuilder(ResultProbe) - Method in interface nxopen.cae.ResultManager
-
- createGraphAcrossIterationsBuilder(Result, ResultParameters, ResultParameters) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating graphs across iterations of result values two result parameters.
- createGraphAcrossIterationsBuilder(Result, ResultParameters[], String[], String) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating graphs across iterations of result values of expression.
- createGraphAlongPathBuilder(int) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating the graph of result values of Postview result defined by series of
entities or path object.
- createGraphAlongPathBuilder(int, int) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating the graph of result values of two postviews
defined by series of entities or path object.
- createGraphAlongPathBuilder(Result, ResultParameters) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating the graph of result values series of entities
or path object defined by result parameter.
- createGraphAlongPathBuilder(ResultProbe) - Method in interface nxopen.cae.ResultManager
-
- createGraphAlongPathBuilder(Result, ResultParameters, ResultParameters) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating the graph of result values of series of entities
or path object defined by two result parameter.
- createGraphBuilder(Graph) - Method in interface nxopen.motion.GraphManager
-
- createGraphControlBuilder(GraphControl) - Method in interface nxopen.mechatronics.GraphControlCollection
-
- createGraphFromResultProbesBuilder() - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating graph from result probes.
- createGraphicalReportBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Graphical Report operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createGraphicalReportOutputBuilder(CAMObject[]) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Output Graphical Report builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createGraphLegendData() - Method in interface nxopen.motion.Graph
-
Creates a
IApplicationData
License requirements: mechanisms ("MECHANISMS")
Created in NX12.0.0
- createGraphObjectBuilder(Graph) - Method in interface nxopen.motion.GraphManager
-
Creates a
GraphObjectBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX11.0.0
- createGraphObjects() - Method in interface nxopen.motion.LoadTransferBuilder
-
Creates graph objects
License requirements: mechanisms ("MECHANISMS")
.
- createGraphOrbitBuilder(int) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating the orbit graph from postview.
- createGraphOrbitBuilder(Result, ResultParameters) - Method in interface nxopen.cae.ResultManager
-
Returns a builder used for creating the orbit graph from result defined by result parameter.
- createGrooveMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a Groove Milling operation builder
License requirements: cam_base ("CAM BASE")
.
- createGrooveToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a groove builder
License requirements: cam_base ("CAM BASE")
.
- createGroundClearanceBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createGroundClearanceBuilder(GroundClearance) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
GroundClearanceBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createGroup(String, TaggedObject[]) - Method in interface nxopen.cae.CaeGroupCollection
-
Create a Group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createGroup(String, int, TaggedObject[]) - Method in interface nxopen.cae.CaeGroupCollection
-
Create a Group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createGroup(Tag[], int) - Method in interface nxopen.uf.UFGroup
-
- createGroupBuilder(Part, AMEGroup) - Method in interface nxopen.ame.AMEManager
-
Creates a
GroupBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createGroupBuilder(Group) - Method in interface nxopen.diagramming.GroupCollection
-
- createGroupByBoundaryBuilder() - Method in interface nxopen.cae.CaeGroupCollection
-
Creates element group representing volume.
- createGroupEdgeMethod(CaeGroup, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a group edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createGroupElemEdgeMethod(CaeGroup, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a group element edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createGroupElemFaceMethod(CaeGroup, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a group element face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createGroupElemMethod(CaeGroup, GroupElemMethodElemOption.ElemOption) - Method in interface nxopen.cae.SmartSelectionManager
-
- createGroupElemMethod(CaeGroup, boolean, GroupElemMethodElemOption.ElemOption) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a group element method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createGroupFaceBuilder(GroupFace) - Method in interface nxopen.features.FeatureCollection
-
Creates a
GroupFaceBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createGroupFaceMethod(CaeGroup) - Method in interface nxopen.cae.SmartSelectionManager
-
- createGroupFaceMethod(CaeGroup, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a group face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createGroupFeatures() - Method in interface nxopen.cam.NCGroupCollection
-
Creates the group features
License requirements: cam_base ("CAM BASE")
.
- createGroupFolder(AMEBaseNode) - Method in interface nxopen.ame.AMEManager
-
Creates a
AMEGroupFolder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createGroupFromEntityIds(String, CaeGroupCollection.EntityType, int[]) - Method in interface nxopen.cae.CaeGroupCollection
-
Create a Node/Element Group from node/element IDs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createGroupHidden(TaggedObject[]) - Method in interface nxopen.cae.CaeGroupCollection
-
Create a Hidden Group
This Group is not seen in the navigator or the Group Manager UI.
- createGroupLabel(String, Rule, GroupLabel) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createGroupMethod(CaeGroup) - Method in interface nxopen.cae.SmartSelectionManager
-
- createGroupMethod(CaeGroup, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a group method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createGroupNodeMethod(CaeGroup) - Method in interface nxopen.cae.SmartSelectionManager
-
- createGroupNodeMethod(CaeGroup, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a group node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createGroupOfLeftHandedElements() - Method in interface nxopen.cae.modelcheck.SolidElementFaceNormalBuilder
-
- createGroups() - Method in interface nxopen.cae.LaminateExtrudeSetup
-
Create groups for each inflated meshes (one group per mesh).
- createGroups() - Method in interface nxopen.cae.RemoveRibsBuilder
-
Returns the flag to a create groups of rib elements
License requirements: None.
- createGuideCurves() - Method in interface nxopen.weld.JointmarkGuideBuilder
-
Creates the guide curves.
- createGuidedExtensionBuilderEx(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createGuideLine(Edge, Point3d, Vector3d, double) - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Creates a guide line at one of the end points of the sheet edge in the selection.
- createGuideLine(Edge, Point3d, Vector3d, double) - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Creates a guide line at one of the end points of the sheet edge in the selection.
- createGuideLine(Curve, Point3d, double) - Method in interface nxopen.tooling.MWDesignGuideLinesBuilder
-
Create a guide line given a parting line and coordinates close to one of its end points.
- CreateGuideLineData() - Constructor for class nxopen.tooling.MWDesignGuideLinesBuilder.CreateGuideLineData
-
- createGussetBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
GussetBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX7.5.0
- createHalfSxview(Tag, double, double[], double[], Tag, int, UFDraw.HalfSxsegs[], double[]) - Method in interface nxopen.uf.UFDraw
-
- createHandlingCoreBuilder(HandlingCore) - Method in interface nxopen.die.DieCollection
-
- createHandrailBuilder() - Method in interface nxopen.routing.RouteManager
-
- createHardpointOnGeom(Tag, double[]) - Method in interface nxopen.uf.UFSf
-
- createHarnessDevice() - Method in interface nxopen.routing.electrical.HarnessDeviceCollection
-
- createHarnessDevice(String) - Method in interface nxopen.routing.electrical.HarnessDeviceCollection
-
- createHatchBuilder(Hatch) - Method in interface nxopen.annotations.HatchCollection
-
Creates the HatchBuilder
License requirements: drafting ("DRAFTING")
.
- createHeadBaseComponentBuilder(KinematicComponent) - Method in interface nxopen.sim.KinematicComponentCollection
-
Creates a bulder for head base component.
- createHeadImpactApillarBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactApillarBuilder(HeadImpactAPillar) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
HeadImpactAPillarBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createHeadImpactBpillarBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactBpillarBuilder(HeadImpactBPillar) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
HeadImpactBPillarBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createHeadImpactBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactBuilder(HeadImpact) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
HeadImpactBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createHeadImpactFrontHeaderBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactFrontHeaderBuilder(HeadImpactFrontHeader) - Method in interface nxopen.features.VehicleDesignCollection
-
- createHeadImpactOpillarBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactOpillarBuilder(HeadImpactOPillar) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
HeadImpactOPillarBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createHeadImpactOtherRailBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactOtherRailBuilder(HeadImpactOtherRail) - Method in interface nxopen.features.VehicleDesignCollection
-
- createHeadImpactRearHeaderBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactRearHeaderBuilder(HeadImpactRearHeader) - Method in interface nxopen.features.VehicleDesignCollection
-
- createHeadImpactRpillarBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactRpillarBuilder(HeadImpactRPillar) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
HeadImpactRPillarBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createHeadImpactSideRailBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactSideRailBuilder(HeadImpactSideRail) - Method in interface nxopen.features.VehicleDesignCollection
-
- createHeadImpactUpperRoofBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createHeadImpactUpperRoofBuilder(HeadImpactUpperRoof) - Method in interface nxopen.features.VehicleDesignCollection
-
- createHeadImpactZones() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the adult and child head impact sheets should be created,
true they will be created, false they will not be created.
- createHealPath() - Method in interface nxopen.routing.SegmentManager
-
- createHealSpline(DisplayableObject, DisplayableObject, HealPath) - Method in interface nxopen.routing.SegmentManager
-
- createHelicalMotion(UFVariant, UFPath.HelicalMotion) - Method in interface nxopen.uf.UFPath
-
- createHelixBuilder(Helix) - Method in interface nxopen.features.FeatureCollection
-
Creates a
HelixBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
- createHemFixerBuilder(FeatureGroup) - Method in interface nxopen.tooling.ProgressiveDieManager
-
- createHemFlangeFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create hem flange feature builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createHideComponentBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
Creates a
HideComponentBuilder
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX6.0.0
- createHighlightLinesAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a Highlight Lines Analysis builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- createHingeJointBuilder(HingeJoint) - Method in interface nxopen.mechatronics.HingeJointCollection
-
- createHistoryGraph(int, String, Post.GraphParameters, int, int, int, int, double[]) - Method in interface nxopen.cae.Post
-
Create a graph by extracting data from the input postview id, at the input node label or point,
for the input iterations.
- createHistoryList() - Method in interface nxopen.uf.UFPart
-
- createHolderSection(Tag, UFCutter.HolderSection) - Method in interface nxopen.uf.UFCutter
-
- createHoldingSystemBuilder(int, String) - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
Creates a new holding system builder
License requirements: None.
- createHole() - Method in interface nxopen.features.HoleFeatureBuilder
-
Creates a hole body which can be positioned
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createHoleBossBuilder(NXObject[], double, double, NXObject, int) - Method in interface nxopen.cam.HoleBossGeom
-
Create a new Hole or Boss
License requirements: cam_base ("CAM BASE")
.
- createHoleBossGeometryBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Create Hole or Boss Geometry builder
License requirements: cam_base ("CAM BASE")
.
- createHoleDatumSymbolBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates a
HoleDatumSymbolBuilder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX11.0.0
- createHoleDim(UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createHoleDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a hole dimension
License requirements: drafting ("DRAFTING")
.
- createHoleDrillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a Hole Drilling operation builder
License requirements: cam_base ("CAM BASE")
.
- createHoleElementEdgeMethod(Mesh[], boolean, double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a hole element edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createHoleElementEdgeMethod(FEElemEdge, boolean, double, double, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a hole element edge method from element free edge
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createHoleFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Hole feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createHoleIndexLabel(NXObject, String, NXObject, double, Point3d, String, boolean) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
The method to create hole index
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createHoleMakingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a hole making operation builder
License requirements: cam_base ("CAM BASE")
.
- createHoleManufacturingNoteAsNote(NXObject, String[], Point3d) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
The method to create manufaturing information as note
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createHoleManufacturingNoteBuilder() - Method in interface nxopen.tooling.HoleManufacturingNoteCollection
-
Creates manufacturing information builder.
- createHolePackageBuilder(HolePackage) - Method in interface nxopen.features.FeatureCollection
-
Creates a
HolePackageBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.2
- createHolePatch() - Method in interface nxopen.features.PatchBuilder
-
Returns the create hole patch.
- createHoleReportBuilder() - Method in interface nxopen.tooling.HoleReportCollection
-
Creates hole report builder
License requirements: None.
- createHoleTableBuilder(Table) - Method in interface nxopen.annotations.HoleTableCollection
-
If null create a new hole table, otherwise edit existing new hole table
License requirements: drafting ("DRAFTING")
.
- createHollow(String, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createHoodVisibilityBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createHoodVisibilityBuilder(HoodVisibility) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
HoodVisibilityBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createHorizontalBaselineDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
-
Creates a horizontal baseline dimension.
- createHorizontalBaselineDimension(UFDrf.Object[], int, double[]) - Method in interface nxopen.uf.UFDrf
-
- createHorizontalChainDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
-
Creates a horizontal chain dimension.
- createHorizontalChainDimension(UFDrf.Object, int, double[]) - Method in interface nxopen.uf.UFDrf
-
- createHorizontalConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a horizontal constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createHorizontalDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createHorizontalDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a horizontal dimension
License requirements: drafting ("DRAFTING")
.
- createHorizontalMargin(OrdinateOriginDimension, Associativity, double) - Method in interface nxopen.annotations.OrdinateMarginCollection
-
Creates a horizontal ordinate margin object
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- createHorizontalOrdinateAutoDimension(DimensionData, Point3d, boolean, boolean) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a horizontal ordinate automatic dimension
License requirements: drafting ("DRAFTING")
.
- createHorizontalOrdinateDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a horizontal ordinate dimension
License requirements: drafting ("DRAFTING")
.
- createHullBuilder(Hull) - Method in interface nxopen.features.ShipCollection
-
- createHumanBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a human feature builder.
- createHumanHandsDialogBuilder() - Method in interface nxopen.features.HumanBuilder
-
- createHumanPosturePredictionBuilder(HumanPosturePrediction) - Method in interface nxopen.features.FeatureCollection
-
Creates a human posture prediction builder.
- createHydraulicCylinderBuilder(HydraulicCylinder) - Method in interface nxopen.mechatronics.HydraulicCylinderCollection
-
- createHydraulicLifterBuilder(Part, HydraulicLifter) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
HydraulicLifterBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createHydraulicLifterListBuilder(Part) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
- createHydraulicValveBuilder(HydraulicValve) - Method in interface nxopen.mechatronics.HydraulicValveCollection
-
- createHyperbola(Point3d, double, double, double, double, double, NXMatrix) - Method in interface nxopen.CurveCollection
-
- createHyperbola(Point3d, Vector3d, Vector3d, double, double, double, double) - Method in interface nxopen.CurveCollection
-
- createIcon(Point2d, String, Icon.Size) - Method in interface nxopen.markup.MarkupFileObjectCollection
-
Creates a
Icon
License requirements: None.
- createIdealizeBody(Tag, UFVariant) - Method in interface nxopen.uf.UFSf
-
- CreateIdealizeBodyData() - Constructor for class nxopen.uf.UFSf.CreateIdealizeBodyData
-
- createIdealizeRegion(UFVariant, UFVariant) - Method in interface nxopen.uf.UFSf
-
- CreateIdealizeRegionData() - Constructor for class nxopen.uf.UFSf.CreateIdealizeRegionData
-
- createIdResultAccessReferenceField(FieldManager, Result, ResultParameters, String, String) - Method in interface nxopen.cae.ResultManager
-
Creates a result access reference field object that is evaluated at node, element, or element-node id's.
- createIdSymbol(UFDrf.IdSymbolType, String, String, double[], UFDrf.LeaderMode, UFDrf.LeaderAttachType, UFDrf.Object, double[]) - Method in interface nxopen.uf.UFDrf
-
- createIdSymbolBuilder(IdSymbol) - Method in interface nxopen.annotations.IdSymbolCollection
-
Creates a
IdSymbolBuilder
License requirements: drafting ("DRAFTING")
Created in NX5.0.0
- createIformBuilder(IForm) - Method in interface nxopen.features.FeatureCollection
-
Creates a
IFormBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX7.5.0
- createIgesCreator() - Method in interface nxopen.DexManager
-
Create the IgesCreator
License requirements: None.
- createIgesImporter() - Method in interface nxopen.DexManager
-
Create the IgesImporter
License requirements: None.
- createImage(String, String) - Method in interface nxopen.report.ImagesGroupItem
-
Creates an image in images group.
- createImage(String, UFDisp.ImageFormat, UFDisp.BackgroundColor) - Method in interface nxopen.uf.UFDisp
-
- createImage(String, Tag, double[]) - Method in interface nxopen.uf.UFDrf
-
- createImage(View) - Method in interface nxopen.ViewCollection
-
Creates a
Image
License requirements: None.
- createImageBasedLighting(View, boolean) - Method in interface nxopen.ViewCollection
-
- createImageCaptureBuilder() - Method in interface nxopen.gateway.ImageCaptureManager
-
- createImageFromFile(String, Tag, double[]) - Method in interface nxopen.uf.UFDrf
-
- createImpactGrid() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the impact grid should be created,
true it will be created, false it will not be created
License requirements: None.
- createImportAutocadBlockBuilder() - Method in interface nxopen.DraftingManager
-
Creates the Builder for the AutoCAD Block Importer
License requirements: nx_layout ("NX Layout")
.
- createImportBuilder() - Method in interface nxopen.tooling.SIZERCollection
-
- createImportBuilder() - Method in interface nxopen.weld.WeldManager
-
- createImportData() - Method in interface nxopen.fields.FieldManager
-
Creates a Fields.ImportData
License requirements: None.
- createImportDmisBuilder(InspectionGroup) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Import Dmis builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createImportEclassMappingBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createImportEclassProductBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createImportEclassSchemaBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
ImportEClassSchemaBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createImportedResult(String, Result.ResultBasicUnit) - Method in interface nxopen.cae.ResultManager
-
Creates a imported result object given a solver results file and the unit systems that these results are defined in.
- createImportedResult(String, String, Result.ResultBasicUnit) - Method in interface nxopen.cae.ResultManager
-
Creates a imported result object given a solver results file and the unit systems that these results are defined in.
- createImportedResult(String, String) - Method in interface nxopen.cae.ResultManager
-
Creates a imported result object given a solver results file.
- createImportedSolutionBuilder() - Method in interface nxopen.cae.SimSimulation
-
Creates a
ImportedSolutionBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX11.0.0
- createImportEplanPageMacroBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createImportGlobalMappingBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createImportHwxmlBuilder(Part, AMEBaseNode) - Method in interface nxopen.ame.AMEManager
-
Creates an HWXml import builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createImportMcfBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a import axis and channel data from mcf
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createImportOperationBuilder() - Method in interface nxopen.pdm.PdmSession
-
- createImportSimBuilder() - Method in interface nxopen.cae.SimPart
-
Creates ImportSimulationBuilder.
- createImportSubdivisionGeometryBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createImportSymbolBuilder() - Method in interface nxopen.DraftingManager
-
Creates the Builder for the Symbol Importer
License requirements: nx_layout ("NX Layout")
.
- createImprFaces(UFModl.ImprintFacesData) - Method in interface nxopen.uf.UFModlFeatures
-
- createImprintBuilder() - Method in interface nxopen.cae.AbstractionManager
-
- createImprLoop(UFModl.ImprintLoopData) - Method in interface nxopen.uf.UFModlFeatures
-
- createInclinometerBuilder(Inclinometer) - Method in interface nxopen.mechatronics.InclinometerCollection
-
- createInconsistentElementEdgeGroup() - Method in interface nxopen.cae.modelcheck.ReverseShellElementNormalBuilder
-
Creates inconsistent element edge group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createIndependent() - Method in interface nxopen.preferences.DetailViewPreferences
-
Returns the toogle create independent
License requirements: drafting ("DRAFTING")
.
- createIndependentDetailView() - Method in interface nxopen.drawings.ViewStyleDetailBuilder
-
Returns the create independent detail view toggle on the DETAIL tab of the View Style Dialog
License requirements: None.
- createIndependentVariable(Field, NameVariable, Unit, boolean, boolean, double, boolean, boolean, double, boolean, int, boolean, double) - Method in interface nxopen.fields.FieldManager
-
Create an independent variable to be added to the field
License requirements: None.
- createIndependentVariable(Field, NameVariable, Unit, FieldVariable.ValueType, boolean, boolean, double, boolean, boolean, double, boolean, int, boolean, double) - Method in interface nxopen.fields.FieldManager
-
Create an independent variable to be added to the field, specifying the variable value type
License requirements: None.
- createInferConstraintsSetting() - Method in interface nxopen.Sketch
-
Returns the toggle that controls the creation of infer constraints in sketch
License requirements: None.
- createInferredConstraints() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not to create inferred constraints
License requirements: None.
- createInferredConstraints() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the setting that controls whether or not inferred constraints are automatically created when curves and points are created in the sketch.
- createInferredConstraintsBuilder() - Method in interface nxopen.SketchCollection
-
- createInferredMaps() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Infer more matches from matches already 'Accepted'.
- createInferredMargin(OrdinateOriginDimension, Point3d, int) - Method in interface nxopen.annotations.OrdinateMarginCollection
-
Creates an inferred ordinate margin object
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- createInfiniteLine(Point3d, Point3d) - Method in interface nxopen.CurveCollection
-
Creates a
InfiniteLine
that passes through the two specified points.
- createInfoObjectsBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
- createInformationBuilder() - Method in interface nxopen.weld.WeldManager
-
Creates a
InformationBuilder
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
Created in NX9.0.0
- createInitProjBuilder() - Method in interface nxopen.tooling.InitProjCollection
-
Creates a
InitProjBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createInMasterModelPart() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
Returns the create in master model part option
License requirements: None.
- createInnerAngleBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createInnerAngleBuilder(InnerAngle) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
InnerAngleBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createInnerProfileSetBuilder() - Method in interface nxopen.tooling.ShimBuilder
-
Create a inner profile set builder object.
- createInpathEventDataBuilder() - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilder
-
The create inpath event data builder
License requirements: cam_base ("CAM BASE")
.
- createInsertAuxiliaryBuilder() - Method in interface nxopen.tooling.InsertAuxiliaryCollection
-
Creates insert auxiliary builder.
- createInsertComponentBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
- createInsertEditToolsBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates a
InsertEditToolsBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX11.0.0
- createInsertFramesBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Create a InsertFramesBuilder.
- createInsertObjectBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
InsertObjectBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createInsertSheetBodyBuilder(InsertSheetBody) - Method in interface nxopen.features.ShipCollection
-
Creates a
InsertSheetBodyBuilder
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
- createInsetFlange(Tag, Tag, double[], double[], double[], UFModl.InsetFlangeData) - Method in interface nxopen.uf.UFModlSmd
-
- createInspectionAlignmentAssistantBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Operation Alignment Assistant builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionAlignmentBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Alignment Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionAnalyzeBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Analyze dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionAnalyzeOutputBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Analyze Output dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionArcFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Arc Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionCircleFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Circle Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionCmmCommandBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Cmm Command Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionCollisionAvoidanceBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Collision Avoidance dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionConeFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Cone Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionConstructedFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Constructed Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionCparlnFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Cparln Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionCreatePathsBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Create Paths dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionCurveFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Curve Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionCylinderFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Cylinder Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionDeleteMeaPtsBuilderSel(CAMObject[]) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Delete Analyze Points dialog builder with selected operations
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionDeltaMoveBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Delta Move sub-operation.
- createInspectionEdgePointFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Edge Point Feature dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionLinear5axisMoveToPointBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Linear 5axis Move To Point sub-operation.
- createInspectionLinearMoveToPointBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Linear Move To Point sub-operation.
- createInspectionLineFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Line Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionLinkPmiBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Link PMI dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionMeasDataBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Analyze Measured Data dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionMeasurePointBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Measure Point sub-operation.
- createInspectionMethodBuilder(CAMObject) - Method in interface nxopen.cam.InspectionGroupCollection
-
Creates a CMM Inspection method builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionOperationTransformBuilder(CAMObject[]) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Operation Transform dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionOutputOperationBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Output Operation Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionParplnFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Parpln Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionPathBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Path Operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionPatternFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Pattern Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionPlaneFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Plane Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionPointFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Point Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionPolarGridBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Polar Grid sub-operation.
- createInspectionProbeToolBuilder(CAMObject) - Method in interface nxopen.cam.InspectionGroupCollection
-
Creates a probe tool builder for Inspection
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionProbeTrackingBuilder(ProbeTrackPoint) - Method in interface nxopen.cam.InspectionTool
-
Creates a Probe Trackpoint builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionSaveToLayerBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Analyze Save To Layer dialog builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionSaveToLayerBuilderSel(CAMObject[]) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Analyze Save To Layer dialog builder with selected operations
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionScanArcBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Scan Arc sub-operation.
- createInspectionScanCurve5axisBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection 5 Axis Scan Curve sub-operation.
- createInspectionScanCurveBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Scan Curve sub-operation.
- createInspectionScanHelixBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Scan Helix sub-operation.
- createInspectionScanLineBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Scan Line sub-operation.
- createInspectionSensorBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a CMM Inspection Sensor Operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionSensorMassEditBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection subop sensor mass edit dialog builder.
- createInspectionSession() - Method in interface nxopen.Session
-
Create the Inspection session
License requirements: None.
- createInspectionSetup(String) - Method in interface nxopen.Part
-
Creates CMM Inspection setup
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionSphereFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Sphere Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionSurfaceFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Surface Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionToleranceOperationBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates a cmm tolerance operation builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionTorusFeatureBuilder(CAMObject) - Method in interface nxopen.cam.InspectionOperationCollection
-
Creates an Inspection Torus Feature Builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createInspectionUvgridBuilder(InspectionMoveSubop) - Method in interface nxopen.cam.InspectionMoveCollection
-
Create a CMM Inspection Rectangular UV Grid sub-operation.
- createInstance(Tag, int) - Method in interface nxopen.uf.UFFam
-
- createInstance(UFGdt.ToleranceType, Tag, Tag, Tag, double[], double[]) - Method in interface nxopen.uf.UFGdt
-
- createInstanceDataBlockBuilder(Part, PlcBlock, InstanceDataBlockBuilder.CreateMode) - Method in interface nxopen.ame.AMEManager
-
Creates an instance data block builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createInstanceFeatureBuilder(InstanceFeature) - Method in interface nxopen.features.FeatureCollection
-
- createInstanceFeatureBuilder(InstanceFeature[], boolean) - Method in interface nxopen.features.FeatureCollection
-
- createInstanceNameLookupBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
InstanceNameLookupBuilder
which is used to look up the
matching part to place based on the criteria defined in the INSTANCE_NAME_LOOKUP node and the ship
identifier specified in the customer defaults.
- createInstantiatedUdf(Tag, String, Tag[], Tag[], int, Tag[], String[], int) - Method in interface nxopen.uf.UFModlGeneral
-
- createInstantiateTemplateBulkBuilder(Part, String) - Method in interface nxopen.ame.AMEManager
-
- createInstantiationBuilder(Instantiation) - Method in interface nxopen.userdefinedtemplate.Collection
-
- createInsulationBuilder(Part, Component) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createIntegerAttributeListEntry(boolean, boolean, boolean, String, int, int, String, int) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
- createIntegerAttributeListEntry(boolean, boolean, boolean, boolean, String, int, int, String, int) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
Create an integer attribute list entry and add it to the list.
- createIntegerCondition(Property, int, Condition.OperatorOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createInteractiveAnnotationBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
InteractiveAnnotationBuilder
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
Created in NX11.0.0
- createInterference(UFMotion.Interference) - Method in interface nxopen.uf.UFMotion
-
- createInterferenceBody(Tag, int, UFMotion.ReferenceFrame) - Method in interface nxopen.uf.UFMotion
-
- CreateInterferenceBodyData() - Constructor for class nxopen.uf.UFMotion.CreateInterferenceBodyData
-
- createInterferenceBuilder(PackagingInterference) - Method in interface nxopen.motion.PackagingCollection
-
- createInterferenceGeometry(DisplayableObject[], DisplayableObject[]) - Method in interface nxopen.assemblies.ClearanceSet
-
Construct interference geometry for a set of hard interferences.
- createIntermediateDatumCsys() - Method in interface nxopen.SketchInPlaceBuilder
-
- createIntermediateStageBuilder() - Method in interface nxopen.tooling.IntermediateStageCollection
-
Creates create direct unfold builder
License requirements: None.
- createInterpartExpressionsBuilder() - Method in interface nxopen.ExpressionCollection
-
Creates interpart expressions.
- createInterpartLink() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.SpecifyCSYS
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.SpecifyPlane
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.SpecifyPoint
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.SpecifyVector
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpartLink() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the CreateInterpartLink
License requirements: None.
- createInterpolationEadBuilder(FEElement) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Interpolation EAD block and initializes it with the input element if defined.
- createInterruptionPointBuilder(Part, AMEExtendedObject) - Method in interface nxopen.ame.AMEManager
-
Creates a
InterruptionPointBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createIntersect(NXObject, NXObject) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Create intersect.
- createIntersectFeature(Body, boolean, Body[], boolean, boolean) - Method in interface nxopen.features.FeatureCollection
-
Creates an intersect feature.
- CreateIntersectFeatureData() - Constructor for class nxopen.features.FeatureCollection.CreateIntersectFeatureData
-
- createIntersectionCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createIntersectionCurveBuilder(SketchIntersectionCurve) - Method in interface nxopen.SketchCollection
-
Creates the builder for intersection curve
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createIntersectionDofset(String, CaeDOFSet[]) - Method in interface nxopen.cae.CaeDOFSetCollection
-
Create an Intersection of DOFSets
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createIntersectionGeometry() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the indication if the intersection geometry should be created.
- createIntersectionGroup(String, CaeGroup[]) - Method in interface nxopen.cae.CaeGroupCollection
-
Create a Intersection of Groups
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createIntersectionPointBuilder(SketchIntersectionPoint) - Method in interface nxopen.SketchCollection
-
Creates the builder for intersection point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createIntersectionSymbolBuilder(IntersectionSymbol) - Method in interface nxopen.annotations.IntersectionSymbolCollection
-
Creates the IntersectionSymbolBuilder
License requirements: drafting ("DRAFTING")
.
- createInterTransverseFrameListItem() - Method in interface nxopen.features.shipdesign.ItFramesBuilder
-
Create a list containing all required info to generate inter transverse frame.
- createIntObject(int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFCurve
-
- createInverseBendingLinesBuilder(InverseBendingLines) - Method in interface nxopen.features.ShipCollection
-
Creates a
InverseBendingLinesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createIpwContainmentCurvesBuilder(int) - Method in interface nxopen.cam.IpwAnalysisBuilder
-
Creates a list item
License requirements: None.
- createIrayPlusMaterialEditorBuilder(String) - Method in interface nxopen.ViewCollection
-
- createIrayPlusSimpleMaterialEditorBuilder() - Method in interface nxopen.ViewCollection
-
- createIrayPlusStudioEditorBuilder() - Method in interface nxopen.ViewCollection
-
- createIsetArray(UFAssem.IsetArrayData) - Method in interface nxopen.uf.UFAssem
-
- createIsocline() - Method in interface nxopen.features.IsoclineCurveBuilder
-
Creates isocline curves
License requirements: None.
- createIsocline(int, Tag[], double[], String, String, String) - Method in interface nxopen.uf.UFCurve
-
- createIsoclineCurveBuilder(IsoclineCurve) - Method in interface nxopen.features.FreeformCurveCollection
-
Creates a
IsoclineCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX11.0.0
- createIsoclineCurves(Tag, double[], double, double) - Method in interface nxopen.uf.UFModlGeneral
-
- CreateIsoclineCurvesData() - Constructor for class nxopen.uf.UFModlGeneral.CreateIsoclineCurvesData
-
- createIsoclines(Face[]) - Method in interface nxopen.tooling.FaceSplitBuilder
-
Create isocline
License requirements: None.
- createIsocurve(Tag, int, double, double) - Method in interface nxopen.uf.UFModlGeneral
-
- CreateIsocurveData() - Constructor for class nxopen.uf.UFModlGeneral.CreateIsocurveData
-
- createIsoDrawing(Tag) - Method in interface nxopen.uf.UFRoute
-
- createIsolated(Arrangement, String) - Method in interface nxopen.assemblies.ArrangementCollection
-
- createIsolateFeatureBuilder(IsolateFeature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
IsolateFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
- createIsolateViewWithComponents(Component[]) - Method in interface nxopen.assemblies.ComponentAssembly
-
Creates a temporary
View
and shows array of components in it
and treats this as Isolate view till it gets undisplayed.
- CreateIsolateViewWithComponentsData() - Constructor for class nxopen.assemblies.ComponentAssembly.CreateIsolateViewWithComponentsData
-
- createIsoparametricCurvesBuilder(IsoparametricCurves) - Method in interface nxopen.features.FeatureCollection
-
- createIssueAttachment(String, String, IssueAttachment.Type) - Method in interface nxopen.issue.IssueManager
-
Creates a
IssueAttachment
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- createIssueContent(IssueList) - Method in interface nxopen.issue.IssueManager
-
Creates a
IssueContent
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- createIssueContentBuilder(IssueContent) - Method in interface nxopen.issue.IssueManager
-
Creates a
IssueContentBuilder
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- createIssueSnapshotSubsetBuilder(Part) - Method in interface nxopen.issue.IssueManager
-
Creates a
SnapshotSubsetBuilder
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- createIssueSnapshotWorksetBuilder(IssueContent) - Method in interface nxopen.issue.IssueManager
-
- createIsvControlPanelBuilder(IsvControlPanelBuilder.VisualizationType, CAMObject[]) - Method in interface nxopen.sim.KinematicConfigurator
-
Creates an isv control panel builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createIsvControlPanelBuilder(IsvControlPanelBuilder.VisualizationType, String) - Method in interface nxopen.sim.KinematicConfigurator
-
- createIsvControlPanelBuilder(IsvControlPanelBuilder.VisualizationType, NcChannelSelectionData) - Method in interface nxopen.sim.KinematicConfigurator
-
Creates an isv control panel builder with given machine code file name.
- createItemBuilder() - Method in interface nxopen.cam.BoundaryTurnVariableStock
-
Create a new set
License requirements: cam_base ("CAM BASE")
.
- createIterativeAlignment() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the flag indicating whether an iterative alignment will be created
License requirements: None.
- createItFramesBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
ItFramesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
- createJogFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Jog feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createJoggleBuilder(Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
-
Create joggle builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- createJoggleBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
JoggleBuilder
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
Created in NX11.0.0
- createJoggleInputListItem() - Method in interface nxopen.features.sheetmetal.JoggleBuilder
-
Create a input list item.
- createJoinCurvesBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
JoinCurvesBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX5.0.0
- createJoinedCurve(Tag[], int) - Method in interface nxopen.uf.UFCurve
-
- CreateJoinedCurveData() - Constructor for class nxopen.uf.UFCurve.CreateJoinedCurveData
-
- createJoinedFeature(UFModl.StringList, int) - Method in interface nxopen.uf.UFCurve
-
- CreateJoinedFeatureData() - Constructor for class nxopen.uf.UFCurve.CreateJoinedFeatureData
-
- createJoint(UFMotion.Joint) - Method in interface nxopen.uf.UFMotion
-
- createJointBuilder(Joint) - Method in interface nxopen.motion.JointCollection
-
Return
JointBuilder
object
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
- createJointBuilder(WeldJoint) - Method in interface nxopen.weld.WeldManager
-
Creates a
WeldJointBuilder
License requirements: structure_weld ("STRUCTURE WELD")
Created in NX8.0.0
- createJointCoupler(UFMotion.JointCoupler) - Method in interface nxopen.uf.UFMotion
-
- createJointDriverBuilder(JointDriver) - Method in interface nxopen.motion.JointDriverCollection
-
Creates a
JointDriverBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
- createJointExitBuilder(WeldJoint) - Method in interface nxopen.weld.WeldManager
-
Creates a
JointExitBuilder
License requirements: structure_weld ("STRUCTURE WELD")
Created in NX8.0.0
- createJointExitBuilderCurve(Curve) - Method in interface nxopen.weld.WeldManager
-
Creates a
JointExitBuilder
using the curve of a
WeldJoint
License requirements: structure_weld ("STRUCTURE WELD")
Created in NX8.5.0
- createJointmarkBuilder(Jointmark) - Method in interface nxopen.weld.WeldManager
-
- CreateJtBuilder - Interface in nxopen.cae
-
- createJtBuilder() - Method in interface nxopen.cae.ResultManager
-
Creates a builder for exporting a component or result type JT
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- CreateJtBuilder.Component - Class in nxopen.cae
-
This option is used to set the component for export
- createJtCreator() - Method in interface nxopen.PvtransManager
-
Create the JtCreator
License requirements: None.
- createJumperConnection() - Method in interface nxopen.routing.electrical.JumperConnectionCollection
-
- createJunction(UFVariant, String, String, double[], double[]) - Method in interface nxopen.uf.UFSim
-
- createJunctionBuilder(KinematicComponent, KinematicJunction) - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a kinematic junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- createKFBoundBox(Matrix3x3, double[], NXObject[]) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Create bound box.
- createKinematicChain() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a kinematic chain
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createKinematicChannelBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a channel
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createKinematicConfigurator() - Method in interface nxopen.Part
-
Create an instance of
KinematicConfigurator
class that will be used to manage all Machine tool Builder and
Configurator objects
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
Created in NX7.5.0
- createKinematicSinumerikCaBuilder(KinematicComponent) - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a kinematic sinumerik ca config
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createKnuckledProfilesBuilder(KnuckledProfiles) - Method in interface nxopen.features.ShipCollection
-
Creates a
KnuckledProfilesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX5.3.0
- createLabel(AMEEngObject, Point3d) - Method in interface nxopen.ame.AMEManager
-
Creates an Engineering Object Label
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createLabel(String[], Point3d, LetteringPreferences, UserSymbolPreferences, LineAndArrowPreferences, LeaderBundle) - Method in interface nxopen.annotations.AnnotationManager
-
Creates a label.
- createLabel(LabelData) - Method in interface nxopen.cae.NoteCollection
-
Creates a CAE Label
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createLabel(int, String[], double[], UFDrf.LeaderAttachType, UFDrf.Object, double[]) - Method in interface nxopen.uf.UFDrf
-
- createLabelChamferBuilder(LabelChamfer) - Method in interface nxopen.features.FeatureCollection
-
Creates a
LabelChamferBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX7.0.0
- createLabellingRoomsBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
LabellingRoomsBuilder
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
Created in NX12.0.0
- createLabelNotchBlendBuilder(LabelNotchBlend) - Method in interface nxopen.features.FeatureCollection
-
Creates a
LabelNotchBlendBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX8.0.0
- createLabelRangeRecipe(String, int[], int[], int[], int[], CaeSetGroupFilterType) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Creates a Label Range Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createLaminateDynamicEventResult(LaminateDynamicEvent) - Method in interface nxopen.cae.ResultManager
-
- createLaminateExtrudeSetupBuilder(LaminateExtrudeSetup) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
- createLaminateFillSetupBuilder(LaminateExtrudeSetup) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Creates a
LaminateFillSetupBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX7.5.2
- createLaminateGraphicalReportBuilder(LaminateGraphicalReport) - Method in interface nxopen.cae.LaminatePostReportCollection
-
Creates the builder for the
LaminateGraphicalReport
class
License requirements: nx_lam_composites ("Laminate Composites")
Created in NX8.0.0
- createLaminateGraphicalReportResult(LaminateGraphicalReport) - Method in interface nxopen.cae.ResultManager
-
- createLaminateImportedLayupBuilder(LaminateGlobalLayup) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
- createLaminateImportZonesBuilder() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
- createLaminateMatOrientationBuilder(LaminateMatOrientation) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
- createLaminatePlyMaxThicknessVarBuilder() - Method in interface nxopen.cae.LaminatePly
-
- createLaminatePostReportBuilder(LaminatePostReport) - Method in interface nxopen.cae.LaminatePostReportCollection
-
Creates the builder for the
LaminatePostReport
class
License requirements: nx_lam_composites ("Laminate Composites")
Created in NX8.0.0
- createLaminateQuickReportBuilder(LaminateQuickReport) - Method in interface nxopen.cae.LaminatePostReportCollection
-
Creates the builder for the
LaminateQuickReport
class
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX8.0.0
- createLaminateSelectEntitiesBuilder() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
- createLaminateSpreadsheetReportBuilder(LaminateSpreadsheetReport) - Method in interface nxopen.cae.LaminatePostReportCollection
-
Creates the builder for the
LaminateSpreadsheetReport
class
License requirements: nx_lam_composites ("Laminate Composites")
Created in NX8.0.0
- createLaserCircleCutout(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Laser Circle Cutout.
- createLaserHexagonCutout(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Laser Hexagon Cutout.
- createLaserLinearMove(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Laser Linear Move.
- createLaserMethod(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a laser method
License requirements: cam_base ("CAM BASE")
.
- createLaserProfileMove(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Laser Profile Move.
- createLaserRectangleCutout(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Laser Rectangle Cutout.
- createLaserSlotCutout(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Laser Slot Cutout.
- createLaserTeachMode(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a laser teach mode
License requirements: cam_base ("CAM BASE")
.
- createLaserTool(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Create a laser tool
License requirements: cam_base ("CAM BASE")
.
- createLastStaggered() - Method in interface nxopen.geometricutilities.CircularPattern
-
Returns the option to generate the last item in a staggered row.
- createLastStaggered() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the option to generate the last item in a staggered row.
- createLatheMachineControlBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a lathe machine control operation builder
License requirements: cam_base ("CAM BASE")
.
- createLatheUserDefinedBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a lathe user defined operation builder
License requirements: cam_base ("CAM BASE")
.
- createLatticeBuilder(Lattice) - Method in interface nxopen.features.LatticeFeatureCollection
-
Creates a Features.LatticeBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX11.0.2
- createLatticeMap(int, int, FieldVariable[], double[]) - Method in interface nxopen.fields.SpatialMapBuilder
-
Create a lattice spatial map from the input datapoints array.
- CreateLatticeMapData() - Constructor for class nxopen.fields.SpatialMapBuilder.CreateLatticeMapData
-
- createLaw(int, String, String, UFModl.StringList, UFModl.StringList, int, double[], double[], Tag, int) - Method in interface nxopen.uf.UFModlGeneral
-
- createLawCurveBuilder(LawCurve) - Method in interface nxopen.features.FeatureCollection
-
Creates a
LawCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.1
- createLawExtensionBuilder(LawExtension) - Method in interface nxopen.features.FeatureCollection
-
Creates a
LawExtensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createLawExtensionBuilderEx(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
LawExtensionBuilderEx
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
- createLayout2dEditComponentSettingsBuilder(Component[]) - Method in interface nxopen.drafting.SettingsManager
-
Creates a
EditComponentSettingsBuilder
This builder is the interface to edit the 2d component settings of layout
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
- createLayoutBuilder() - Method in interface nxopen.formboard.FormboardManager
-
Creates a
FormboardLayoutBuilder
that can flatten and layout
new formboard geometry, or modify the layout of existing formboard geometry.
- createLayoutBuilder() - Method in interface nxopen.tooling.MWLayoutCollection
-
Creates a Layout builder
License requirements: None.
- createLayoutDefinitionBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
LayoutDefinitionBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createLayoutDrawingSheetBuilder(LayoutDrawingSheet) - Method in interface nxopen.layout2d.LayoutDrawingSheetCollection
-
- createLayoutManagementBuilder() - Method in interface nxopen.tooling.LayoutManagementCollection
-
Creates Layout Management builder.
- createLayoutRepositionBuilder() - Method in interface nxopen.tooling.MWLayoutCollection
-
Creates a layout reposition builder
License requirements: None.
- createLayoutStateApplicator() - Method in interface nxopen.cae.LayoutStateCollection
-
- createLayoutStateBuilder(LayoutState) - Method in interface nxopen.cae.LayoutStateCollection
-
- createLayoutView(Curve) - Method in interface nxopen.routing.electrical.CablewaysLayoutViewCollection
-
- createLayupOffsetBuilder(LaminateLayupOffset) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
- createLcrResultsEvaluationSettingBuilder(LcrResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates LCR results evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createLeaderData() - Method in interface nxopen.annotations.AnnotationManager
-
- createLeaderLine() - Method in interface nxopen.diagramming.CannedAnnotationBuilder
-
- createLeaderLineBuilder(LeaderLine) - Method in interface nxopen.diagramming.LeaderLineCollection
-
- createLeftBubblesToggle() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the status to create left bubbles of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createLegImpact() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the leg impact curves should be created,
true they will be created, false they will not be created.
- createLength(Tag, Tag) - Method in interface nxopen.uf.UFGexp
-
- CreateLengthData() - Constructor for class nxopen.uf.UFGexp.CreateLengthData
-
- createLengthDimension(boolean) - Method in interface nxopen.SketchPolygonBuilder
-
The flag to indicate if we need to create length dimension
License requirements: None.
- createLevelMarker(UFVariant, UFPath.LevelMarker) - Method in interface nxopen.uf.UFPath
-
- createLibraryAuthoringBuilder(Part) - Method in interface nxopen.pid.PidManager
-
- createLightBuilder(Light) - Method in interface nxopen.ViewCollection
-
- createLighteningCutoutBuilder(LighteningCutout) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
LighteningCutoutBuilder
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
Created in NX11.0.0
- createLighting(View) - Method in interface nxopen.ViewCollection
-
Creates a
Lighting
License requirements: None.
- createLightweightSectionBuilder(LightweightSection) - Method in interface nxopen.annotations.PmiLightweightSectionCollection
-
- createLimitsPath(Curve) - Method in interface nxopen.weld.WeldJointBuilder
-
Creates the path to be used for the limits.
- createLimitSwitchBuilder(LimitSwitch) - Method in interface nxopen.mechatronics.LimitSwitchCollection
-
- createLine(Point3d, Point3d) - Method in interface nxopen.CurveCollection
-
- createLine(Point, Point) - Method in interface nxopen.CurveCollection
-
- createLine(UFCurve.Line) - Method in interface nxopen.uf.UFCurve
-
- createLineArc(UFCurve.LineArc) - Method in interface nxopen.uf.UFCurve
-
- createLineArc(UFCurve.LineArc) - Method in interface nxopen.uf.UFSfCurve
-
- createLinearCamBuilder(Part, LinearCam) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
LinearCamBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createLinearCamListBuilder(Part) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
LinearCamListBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createLinearCline(int, UFDrf.Object[]) - Method in interface nxopen.uf.UFDrf
-
- createLinearDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createLinearDimensionBuilder(LinearDimension) - Method in interface nxopen.features.FeatureCollection
-
Creates a
LinearDimensionBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createLinearDimensionBuilder(Dimension) - Method in interface nxopen.SketchCollection
-
- createLinearIset(int, String, String, String, String, Tag[]) - Method in interface nxopen.uf.UFModlGeneral
-
- createLinearLimitJointBuilder(LinearLimitJoint) - Method in interface nxopen.mechatronics.LinearLimitJointCollection
-
- createLinearMotion(UFVariant, UFPath.LinearMotion) - Method in interface nxopen.uf.UFPath
-
- createLinearPathBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a linear path builder for building a path consisting of
lines, arcs (bends) and elbows.
- createLinearPathSettings() - Method in interface nxopen.routing.RouteManager
-
Creates a linear path settings object which stores preferences to
apply when creating linear paths using a
LinearPathBuilder
.
- createLinearSpringJointBuilder(LinearSpringJoint) - Method in interface nxopen.mechatronics.LinearSpringJointCollection
-
- createLineDesignerMappingBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createLinePointAngle(Tag, Tag, double, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createLinePointPoint(Tag, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createLinePointPoint(Tag, Tag, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFSfCurve
-
- createLinePointPrincipalAxis(Tag, UFCurve.PrincipalAxis, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createLinePointTangent(Tag, Tag, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createLineTangentPoint(Tag, Tag, UFCurve.HelpData, UFCurve.Limit[], Tag, boolean) - Method in interface nxopen.uf.UFCurve
-
- createLineTarget(DatumTargetData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a PMI line target
License requirements: geometric_tol ("GDT")
.
- createLineTarget(DatumTargetData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a drafting line target
License requirements: drafting ("DRAFTING")
.
- createLineTwoPoints(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createLineType() - Method in interface nxopen.pid.LibraryAuthoringBuilder
-
Creates a new line type
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- createLineWeld(LineWeldData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.WeldCollection
-
Creates a line weld.
- createLineWeldBuilder(LineWeld) - Method in interface nxopen.annotations.WeldCollection
-
Creates a
LineWeldBuilder
License requirements: drafting ("DRAFTING")
Created in NX6.0.0
- createLink(UFMotion.Link) - Method in interface nxopen.uf.UFMotion
-
- createLinkBuilder(Link) - Method in interface nxopen.motion.LinkCollection
-
Creates a
LinkBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
- createLinkCouplerBuilder(LinkCoupler) - Method in interface nxopen.motion.LinkCouplerCollection
-
Creates a
LinkCouplerBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX12.0.0
- createLinkDriverBuilder(LinkDriver) - Method in interface nxopen.motion.LinkDriverCollection
-
Creates a
LinkDriverBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX11.0.0
- createLinkedBody(Tag, Tag, Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- createLinkedCurve(Tag, Tag, Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- createLinkedDatum(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- createLinkedExterior(UFModl.LinkedExt) - Method in interface nxopen.uf.UFModl
-
- createLinkedFace(Tag, Tag, Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- createLinkedFacetBuilder(LinkedFacet) - Method in interface nxopen.features.FeatureCollection
-
Creates a
LinkedFacetBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createLinkedMirror(Tag, Tag, Tag, Tag, Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- createLinkedMirrorPartBuilder(Part) - Method in interface nxopen.PartCollection
-
- createLinkedPart(Tag, Tag, String) - Method in interface nxopen.uf.UFWave
-
- createLinkedPartModule(Part) - Method in interface nxopen.features.PartModule
-
Creates a linked part module
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- createLinkedProfiles() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Create linked curves of the profiles in the sketch from the other part.
- createLinkedPtAngle(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- createLinkedPtCenter(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- createLinkedPtCurve(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- createLinkedPtPoint(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- createLinkedRegion(int, Tag[], int, Tag[], Tag, Tag, boolean, boolean, boolean) - Method in interface nxopen.uf.UFWave
-
- createLinkedRoutePort(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- createLinkedRouteSegment(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- CreateLinkedRouteSegmentData() - Constructor for class nxopen.uf.UFWave.CreateLinkedRouteSegmentData
-
- createLinkedSectionView(CutView) - Method in interface nxopen.CutViewCollection
-
Create a linked section view.
- createLinkedSketch(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- createLinkedString(Tag, Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- createLinkSymbolToDeviceTypeBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createList(String, String, String[], String[]) - Method in interface nxopen.issue.IssueSite
-
Creates an
IssueList
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX9.0.0
- createList() - Method in interface nxopen.uf.UFModlGeneral
-
- createListBlockBuilder() - Method in interface nxopen.PhysicalMaterialCollection
-
Creates a
PhysicalMaterialListBuilder
that controls the physical materials list UI block look and feel as well as capturing the interactions so the values/settings can be journaled.
- createListItem() - Method in interface nxopen.tooling.SelectReuseLibraryListBuilder
-
Generate a list item.
- createLoad(String, String) - Method in interface nxopen.cae.SimLoadCollection
-
Creates a load for the load descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createLoadCase() - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
Create a
TBSLoadCase
object
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
- createLoadCaseListBuilder() - Method in interface nxopen.cae.aerostructures.LoadCaseCollection
-
Creates a
LoadCaseListBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- createLoadCaseSet(LoadCaseSetBuilder) - Method in interface nxopen.cae.aerostructures.LoadCaseSetCollection
-
Create a AeroStruct loadcase set.
- createLoadCaseSetBuilder(LoadCaseSet) - Method in interface nxopen.cae.aerostructures.LoadCaseSetCollection
-
Creates a
LoadCaseSetBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- createLoadDraftingStandardBuilder() - Method in interface nxopen.preferences.DraftingPreferenceManager
-
Creates the load drafting standard builder
License requirements: None.
- createLoadGroup() - Method in interface nxopen.cae.SimGroupContainer
-
Creates a load group for a solution or solution step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createLoading(BaseDataLoadingBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- createLoadInterpartDataBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
- createLoadLineDesignerBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
LoadLineDesignerBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createLoadPatternBuilder(DurabilityLoadPattern) - Method in interface nxopen.cae.DurabilityExcitationCollection
-
- createLoadProviderBuilder(DurSpecialistLoadProvider) - Method in interface nxopen.cae.DurSpecialistLoadProviderCollection
-
- createLoadSet(String, String, int) - Method in interface nxopen.cae.SimLoadSetCollection
-
Creates a
SimLoadSet
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX10.0.0
- createLoadSetBuilder(String, String, SimLoadSet, int) - Method in interface nxopen.cae.SimSimulation
-
Creates a
SimLoadSetBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX10.0.0
- createLoadTransferBuilder(LoadTransfer) - Method in interface nxopen.motion.LoadTransferCollection
-
- createLocalDefinitionBuilder(DurSpecialistLocalDefinition) - Method in interface nxopen.cae.DurSpecialistLocalDefinitionCollection
-
- createLocalDefinitionByGroupBuilder() - Method in interface nxopen.cae.DurSpecialistLocalDefinitionCollection
-
- createLocalDefinitionFolderBuilder(LocalDefinitionFolder) - Method in interface nxopen.layout2d.LocalDefinitionFolderCollection
-
Creates local definition folder builder instance.
- createLocalLift(UFVariant) - Method in interface nxopen.uf.UFDrpos
-
- createLocalOffsetBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
Creates a
LocalOffsetBuilder
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
Created in NX12.0.0
- createLocalRadiusAnalysisBuilder(LocalRadiusAnalysis) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
- createLocalRemeshBuilder() - Method in interface nxopen.cae.MeshManager
-
Creates a local remesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createLocalScale(UFModl.DfoScaleType, UFModl.DfoRegion, Tag, Tag, Tag, String[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createLocalScaleCurveBuilder(LocalScaleCurve) - Method in interface nxopen.features.SynchronousCurveCollection
-
Creates a
LocalScaleCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX11.0.0
- createLocation() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the location option to create relief, true: create relief at the location of forming region, false: create relief at the next station(offset one pitch).
- createLocatorDesignatorBuilder(LocatorDesignator) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createLocatorReferenceBuilder() - Method in interface nxopen.weld.WeldManager
-
- createLockAngleBuilder() - Method in interface nxopen.cae.LaminateGlobalLayup
-
Creates a
LaminateLockAngleBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX7.5.0
- createLoftedFlangeFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Lofted Flange feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createLogFile(UFClone.OperationClass, String, String, UFClone.GenLogOpts) - Method in interface nxopen.uf.UFClone
-
- createLogicalAssociation(String, NXObject, NXObject[], boolean) - Method in interface nxopen.routing.RouteLogicalAssociationCollection
-
- createLogicalNode(String) - Method in interface nxopen.mechatronics.ECADImportBuilder
-
- createLogicalObjects() - Method in interface nxopen.assemblies.DesignElementBuilder
-
Creates the pre-creation objects for the design elements
License requirements: nx_4gd_integration ("4th Generation Design")
.
- createLogicalObjects() - Method in interface nxopen.features.shipdesign.CopyPasteNewBuilder
-
Creates the pre-creation logical objects
License requirements: nx_ship_detail ("Ship Detail Design")
.
- createLogicalObjects() - Method in interface nxopen.gateway.GenericFileNewBuilder
-
Creates the pre-creation objects for the parts
License requirements: None.
- createLogicalObjects() - Method in interface nxopen.pdm.ObjectCreateBuilder
-
Creates Pre-Creation LogicalObjects
License requirements: None.
- createLogicalObjects() - Method in interface nxopen.pdm.PartOperationBuilder
-
Creates the pre-creation objects for the parts
License requirements: None.
- createLogicObjectBuilder(LogicObject) - Method in interface nxopen.mechatronics.LogicObjectCollection
-
Create builder for LogicObject class
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- createLongitudinalBulkheadBuilder(LongitudinalBulkhead) - Method in interface nxopen.features.ShipCollection
-
- createLoopSet() - Method in interface nxopen.cam.CustomLoops
-
- createLouverFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Louver feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createLsdynaFormAnalysisResultDisplayBuilder() - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a LS-Dyna Formability Analysis - Result Display builder
License requirements: die_engineering ("DIE ENGINEERING")
.
- createLsdynaGeometryPreparationBuilder() - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a formability analysis geometry preparation builder
License requirements: die_engineering ("DIE ENGINEERING")
.
- createLSDynaKFile(String) - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Creates LS-DYNA K file.
- createLsdynaKfileGeneratorBuilder() - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a LS-Dyna integration builder.
- createLumpedMassEadBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Lumped Mass EAD block.
- createLumpedMassEadBuilder(FEElement) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the LumpedMass EAD block and initializes it with the input element if defined.
- createLvNx(String, double, int, UFSf.LvFunctionMode, Tag, Tag) - Method in interface nxopen.uf.UFSf
-
- createMachineAdjustmentBuilderListBuilder(Part) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
- createMachineBaseComponentBuilder(KinematicComponent) - Method in interface nxopen.sim.KinematicComponentCollection
-
Creates a builder for a machine base component.
- createMachineGroupBuilder(CAMObject) - Method in interface nxopen.cam.InspectionGroupCollection
-
Creates a machine group builder for Inspection
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createMachineGroupBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a machine group builder
License requirements: cam_base ("CAM BASE")
.
- createMachineHeadGroupBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a machine head group builder
License requirements: cam_base ("CAM BASE")
.
- createMachineKitBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for the machine tool kit
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createMachineLibraryBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for the machine tool Library dialog
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createMachinePocketGroupBuilder(CAMObject) - Method in interface nxopen.cam.InspectionGroupCollection
-
Creates a machine pocket group builder for Inspection
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createMachinePocketGroupBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a machine pocket group builder
License requirements: cam_base ("CAM BASE")
.
- createMachineReliefBuilder(MachineRelief) - Method in interface nxopen.die.DieCollection
-
- createMachineToolConfigurationBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for the Machine Tool Configuration
License requirements: nx_isv_mtb ("Machine Tool Builder")
.
- createMachineTurretGroupBuilder(CAMObject) - Method in interface nxopen.cam.InspectionGroupCollection
-
Creates a machine turret group builder for Inspection
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createMachineTurretGroupBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a machine turret group builder
License requirements: cam_base ("CAM BASE")
.
- createMachiningFeature(String, int, Tag[]) - Method in interface nxopen.uf.UFMfm
-
- createMachiningFeaturesFromModelingFeatures(int, Tag[], int, String[]) - Method in interface nxopen.uf.UFMfm
-
- CreateMachiningFeaturesFromModelingFeaturesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromModelingFeaturesData
-
- createMachiningFeaturesFromRecognizedFeatures(int, Tag[]) - Method in interface nxopen.uf.UFMfm
-
- CreateMachiningFeaturesFromRecognizedFeaturesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromRecognizedFeaturesData
-
- createMachiningFeaturesFromTaggedArcs() - Method in interface nxopen.uf.UFMfm
-
- CreateMachiningFeaturesFromTaggedArcsData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedArcsData
-
- createMachiningFeaturesFromTaggedEdges(int, Tag[]) - Method in interface nxopen.uf.UFMfm
-
- CreateMachiningFeaturesFromTaggedEdgesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedEdgesData
-
- createMachiningFeaturesFromTaggedFaces(int, Tag[]) - Method in interface nxopen.uf.UFMfm
-
- CreateMachiningFeaturesFromTaggedFacesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedFacesData
-
- createMachiningFeaturesFromTaggedPoints() - Method in interface nxopen.uf.UFMfm
-
- CreateMachiningFeaturesFromTaggedPointsData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedPointsData
-
- createMachiningFeaturesFromUserDefinedFeatures(int, Tag[], int, String[]) - Method in interface nxopen.uf.UFMfm
-
- CreateMachiningFeaturesFromUserDefinedFeaturesData() - Constructor for class nxopen.uf.UFMfm.CreateMachiningFeaturesFromUserDefinedFeaturesData
-
- createMainDimensionsBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
MainDimensionsBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
- createMajorAngularDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a major angular dimension
License requirements: drafting ("DRAFTING")
.
- createMajorAngularDimensionBuilder(MajorAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createMakeComponentUniqueBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
MakeComponentUniqueBuilder
that can create definition
for the selected 2D Component instance
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
- createMakeOffsetBuilder(MakeOffset) - Method in interface nxopen.features.FeatureCollection
-
Creates a
MakeOffsetBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX7.0.0
- createMakesolidBuilder(MakeSolid) - Method in interface nxopen.features.DesignFeatureCollection
-
Creates a
MakeSolidBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX11.0.0
- createMakeSymmetricBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchMakeSymmetricBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createMakeUniqueOperationBuilder(BasePart) - Method in interface nxopen.pdm.PdmSession
-
- createMakeUniquePartBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
Creates a
MakeUniquePartBuilder
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX8.0.0
- createManage2dSymbolsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
Manage2dSymbolsBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createManage3dmodelsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
Manage3DModelsBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createManageEclassmappingBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createManageInlineBehaviorBuilder(Part) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createManageObjectTypeBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
ManageObjectTypeBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createManikinBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createManikinBuilder(Manikin) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
ManikinBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createManualControlBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a Manual Control operation builder
License requirements: cam_base ("CAM BASE")
.
- createManualFeatureBuilder() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Creates a new manual feature builder
License requirements: None.
- createManualMorphBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for Manual Morphing command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createManualNodeAssociationBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for manual node association command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createManualRouteBuilder(ElectricalStockDevice.RouteLevel, ElectricalStockDevice) - Method in interface nxopen.routing.RouteManager
-
- createManualRow(double) - Method in interface nxopen.uf.UFPlist
-
- createManufacturingAssemblyNavigatorBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
ManufacturingAssemblyNavigatorBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX12.0.0
- createManufacturingDataBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
ManufacturingDataBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createManufacturingOutBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
ManufacturingOutBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX5.3.0
- createManufacturingPreparationBuilder() - Method in interface nxopen.features.ShipCollection
-
- createManufacturingPreparationBuilder(ManufacturingPreparation) - Method in interface nxopen.features.ShipCollection
-
- createMapData() - Method in interface nxopen.cae.ManualMorphBuilder
-
Creates the object for user defined manual maps
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createMapFeatureTeaching(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Creates a CAM.MapFeatureTeaching
License requirements: cam_base ("CAM BASE")
Created in NX10.0.3
NX_REMOVE_FROM_JAVA_API
- createMapleBuilder(Maple) - Method in interface nxopen.features.FeatureCollection
-
- createMapleExpBuilder() - Method in interface nxopen.optimization.OptimizationCollection
-
- createMappedMeshBuilder(MappedMesh) - Method in interface nxopen.cae.MeshManager
-
Creates a mapped mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createMapToExistingObjectBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a Map To Existing Builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createMarginCalculationBuilder(MarginCalculation) - Method in interface nxopen.cae.aerostructures.MarginCalculationCollection
-
- createMarginResultTableDataProvider() - Method in interface nxopen.cae.aerostructures.MarginSolution
-
Creates a
MarginResultTableDataProvider
the table provider will be based on every calculation of this solution that have results
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- createMarginResultTableDataProvider(MarginCalculation[]) - Method in interface nxopen.cae.aerostructures.MarginSolution
-
Creates a
MarginResultTableDataProvider
Only the subset of calculation given in argument are taken into account rather than all the calculation of the solution.
- createMarginSolutionBuilder(MarginSolution) - Method in interface nxopen.cae.aerostructures.MarginSolutionCollection
-
Creates the builder object of AeroStruct meta solution.
- createMarkAsTemplateBuilder() - Method in interface nxopen.DraftingManager
-
- createMarker(int, int) - Method in interface nxopen.cae.xyplot.Graph
-
Creates a marker in the position of a source point.
- createMarker(int, int, int, double) - Method in interface nxopen.cae.xyplot.Graph
-
Creates a marker in the linear interpolation position between two source points.
- createMarker(int, int, int) - Method in interface nxopen.cae.xyplot.I3DDataGraph
-
Creates a marker in the position of a source point.
- createMarker(int, int, int, int, double) - Method in interface nxopen.cae.xyplot.I3DDataGraph
-
Creates a marker in the linear interpolation position between two source points.
- createMarker(UFMotion.Marker) - Method in interface nxopen.uf.UFMotion
-
- createMarkerBuilder(Marker) - Method in interface nxopen.motion.MarkerCollection
-
Creates a
MarkerBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createMarkerToNode(NXObject, int, int, boolean) - Method in interface nxopen.motion.SplineBeamBuilder
-
Creates a new list item
License requirements: mechanisms ("MECHANISMS")
.
- createMarkingLineBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
MarkingLineBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX5.0.0
- createMarkingLineDesignBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
- createMassPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
-
Create the MassPropertiesBuilder
License requirements: None.
- createMasterContainer(String) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Create a master manufacturing container
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- createMasterCutBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Create a Master Cut builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createMasterSymbolBuilder(MasterSymbol) - Method in interface nxopen.annotations.CustomSymbolCollection
-
Creates the Master Symbol builder
License requirements: None.
- createMasterSymbolListItemBuilder() - Method in interface nxopen.annotations.CustomSymbolCollection
-
Creates the Master Symbol List Item builder
License requirements: None.
- createMatchEdgeBuilder(MatchEdge) - Method in interface nxopen.features.FeatureCollection
-
Creates a
MatchEdgeBuilder
License requirements: features_modeling ("FEATURES MODELING")
Created in NX6.0.0
- createMatchSurfaceBuilder() - Method in interface nxopen.geometricutilities.CAMDataPrepManager
-
- createMaterial(String) - Method in interface nxopen.uf.UFDisp
-
- createMaterialAllowanceBuilder() - Method in interface nxopen.features.ShipCollection
-
- createMaterialAssignBuilder() - Method in interface nxopen.PhysicalMaterialCollection
-
Creates a PhysMat.MaterialAssignBuilder that is used to control/set the material assign UI as well as to assign materials to bodies.
- CreateMaterialData() - Constructor for class nxopen.uf.UFDisp.CreateMaterialData
-
- createMaterialEstimationBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a Features.ShipDesign.MaterialEstimationBuilder.
- createMaterialLibmgrBuilder() - Method in interface nxopen.PhysicalMaterialCollection
-
Creates a PhysMat.PhysicalMaterialLibMgrBuilder used by the material library manager UI to control the look and feel as well as capturing the interactions so the values/settings can be journaled.
- createMaterialSpecificationBuilder(MaterialSpecification) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createMathIntegrationBuilder(MathIntegration) - Method in interface nxopen.features.FeatureCollection
-
- createMathIntegrationExpBuilder() - Method in interface nxopen.optimization.OptimizationCollection
-
Create builder for MathIntegrationExpBuilder class
License requirements: None.
- createMatingConverter() - Method in interface nxopen.assemblies.ComponentAssembly
-
- createMatlabclientBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createMatrix(double[]) - Method in interface nxopen.uf.UFCsys
-
- createMcArray(UFAssem.McArrayData) - Method in interface nxopen.uf.UFAssem
-
- createMcdLogical(String) - Method in interface nxopen.tooling.SIZERImportBuilder
-
Creates logical node in system navigator.
- createMCDSignalServerConfigurationBuilder(MCDSignalServerConfigurationObject) - Method in interface nxopen.mechatronics.MCDSignalServerConfigurationCollection
-
- createMeasureAngleBuilder(NXObject) - Method in interface nxopen.MeasureManager
-
Creates a
MeasureAngleBuilder
Note: This class is used internally for measurement, but is not required for creation
of an angle measurement.
- createMeasureBodyBuilder(NXObject) - Method in interface nxopen.MeasureManager
-
Creates a
MeasureBodyBuilder
Note: This class is used internally for measurement, but is not required for creation
of a face measurement.
- createMeasureBuilder(PackagingMeasure) - Method in interface nxopen.motion.PackagingCollection
-
- createMeasureDistanceBuilder(NXObject) - Method in interface nxopen.MeasureManager
-
Creates a
MeasureDistanceBuilder
Note: This class is used internally for measurement, but is not required for creation
of a distance measurement.
- createMeasureFaceBuilder(NXObject) - Method in interface nxopen.MeasureManager
-
Creates a
MeasureFaceBuilder
Note: This class is used internally for measurement, but is not required for creation
of a face measurement.
- createMeasurement(UFMotion.Measurement) - Method in interface nxopen.uf.UFMotion
-
- createMechanicalInterfaceTerminalRelationship() - Method in interface nxopen.routing.InterfaceTerminalRelationshipCollection
-
- createMechanicalInterfaceTerminalRelationship(String) - Method in interface nxopen.routing.InterfaceTerminalRelationshipCollection
-
- createMechanicalLoadSumBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Creates a builder for mechanical load summary command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createMechanicalRoutingSubsetBuilder(SubsetBuilder) - Method in interface nxopen.assemblies.SubsetCollection
-
- createMechanicalRoutingSubsetBuilderForSurroundingEdit(SubsetBuilder) - Method in interface nxopen.assemblies.SubsetCollection
-
- createMechatronicsBuilder(Mechatronics) - Method in interface nxopen.motion.MechatronicsCollection
-
Creates a
MechatronicsBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX11.0.0
- createMember(int) - Method in interface nxopen.PartFamilyManager
-
- createMemberIdentifier(FamilyAttribute[], String[], String) - Method in interface nxopen.partfamily.TemplateManager
-
Creates a member identifier for a part family member from the key attributes
and value pair.
- createMenu() - Method in interface nxopen.blockstyler.Tree
-
Creates the menu.
- createMenu() - Method in interface nxopen.blockstyler.Wizard
-
Creates a popup menu.
- createMergeBuilder(Part, Component) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createMergeFaceBuilder() - Method in interface nxopen.cae.AbstractionManager
-
Creates a
MergeFaceBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX11.0.0
- createMergeFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
MergeFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
- createMergeFacetFacesBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
Creates a
MergeFacetFacesBuilder
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
Created in NX12.0.0
- createMergeStocksBuilder() - Method in interface nxopen.routing.RouteManager
-
- createMergeSubdivisionBodiesBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createMesh0dBuilder(Mesh0d) - Method in interface nxopen.cae.MeshManager
-
Creates a 0d mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createMesh1dBuilder(Mesh1d) - Method in interface nxopen.cae.MeshManager
-
Creates a 1d mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createMesh2dBuilder(Mesh2d) - Method in interface nxopen.cae.MeshManager
-
Creates a 2d mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createMesh3dHexBuilder(SweptMesh) - Method in interface nxopen.cae.MeshManager
-
Creates a 3d Hex mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createMesh3dHybridBuilder(Mesh) - Method in interface nxopen.cae.MeshManager
-
Creates a hybrid mesh builder
License requirements: nx_adv_fluid_mod ("NX Advanced Fluid Modeling - Basic")
.
- createMesh3dTetBuilder(Mesh3d) - Method in interface nxopen.cae.MeshManager
-
Creates a 3d Tet mesh builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createMeshFromBoundaryBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates Mesh From Boundary builder.
- createMeshMatingCondition(Tag, Tag, String, int, UFSf.AssemblyType, double, double) - Method in interface nxopen.uf.UFSf
-
- createMeshpointConicCenterBuilder() - Method in interface nxopen.cae.MeshPointCollection
-
- createMeshpointExistingPointBuilder() - Method in interface nxopen.cae.MeshPointCollection
-
- createMeshpointInsideVolumeBuilder() - Method in interface nxopen.cae.MeshPointCollection
-
- createMeshpointMultipleOnCurveBuilder() - Method in interface nxopen.cae.MeshPointCollection
-
- createMeshpointOnCurveBuilder() - Method in interface nxopen.cae.MeshPointCollection
-
- createMeshpointOnFaceBuilder() - Method in interface nxopen.cae.MeshPointCollection
-
- createMeshpointProjectBuilder() - Method in interface nxopen.cae.MeshPointCollection
-
- createMeshRefinementBuilder() - Method in interface nxopen.cae.MeshManager
-
Creates a
MeshRefinementBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX11.0.0
- createMeshSizeFieldData(int, TaggedObject[]) - Method in interface nxopen.fields.FieldManager
-
Create Mesh Size Field
Field
object
License requirements: None.
- createMeshSurfaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Mesh Surface feature builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createMeshTransformerBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createMetaformBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
MetaformBuilder
License requirements: adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
Created in NX7.5.0
- createMetasolutionBuilder(DurabilityMetaSolution) - Method in interface nxopen.cae.DurabilityMetaSolutionCollection
-
Creates the builder object of durability meta solution.
- createMethod() - Method in interface nxopen.ame.PlcMethodBuilder
-
To Create Method
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createMethod(InspectionGroup, String, String, NCGroupCollection.UseDefaultName, String) - Method in interface nxopen.cam.InspectionGroupCollection
-
Create a method group of the specified type and subtype under the parent group.
- createMethod(NCGroup, String, String, NCGroupCollection.UseDefaultName, String) - Method in interface nxopen.cam.NCGroupCollection
-
Create a method group of the specified type and subtype under the parent group.
- createMethod() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the creation method
License requirements: None.
- createMfgData() - Method in interface nxopen.features.shipdesign.ManufacturingDataBuilder
-
Loops through all the parts and creates manufacturing data on those parts containing Plate or Stiffener Steel Features
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- createMidpointConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a midpoint constraint.
- createMidsrfFeature(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createMidSurfaceByFacePairsBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createMidSurfaceUserDefinedBuilder(MidSurfaceUserDefined) - Method in interface nxopen.features.FeatureCollection
-
- createMigratedPanelFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Migrated Panel feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createMillAreaGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a mill area geometry builder
License requirements: cam_base ("CAM BASE")
.
- createMillBoundaryGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a mill boundary geometry builder
License requirements: cam_base ("CAM BASE")
.
- createMillFormToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a mill form builder
License requirements: cam_base ("CAM BASE")
.
- createMillGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a mill geometry builder
License requirements: cam_base ("CAM BASE")
.
- createMillMachineControlBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a mill machine control operation builder
License requirements: cam_base ("CAM BASE")
.
- createMillMethodBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a mill method builder
License requirements: cam_base ("CAM BASE")
.
- createMillOrientGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a mill orient geometry builder
License requirements: cam_base ("CAM BASE")
.
- createMillTextGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a mill text geometry builder
License requirements: cam_base ("CAM BASE")
.
- createMillToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a mill tool builder
License requirements: cam_base ("CAM BASE")
.
- createMillToolProbingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a mill tool probing operation builder
License requirements: cam_base ("CAM BASE")
.
- createMillUserDefinedBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a mill user defined operation builder
License requirements: cam_base ("CAM BASE")
.
- createMillVolumeGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a mill volume geometry builder
License requirements: cam_base ("CAM BASE")
.
- createMinorAngularDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a minor angular dimension
License requirements: drafting ("DRAFTING")
.
- createMinorAngularDimensionBuilder(MinorAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createMirrorBody(Tag, Tag) - Method in interface nxopen.uf.UFModeling
-
- createMirrorBodyBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
MirrorBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX5.0.0
- createMirrorBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Create Mirror builder.
- createMirrorBuilder(Mirror) - Method in interface nxopen.features.FeatureCollection
-
Creates
MirrorBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.1
- createMirrorCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createMirrorCertificationBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createMirrorCertificationBuilder(MirrorCertification) - Method in interface nxopen.features.VehicleDesignCollection
-
- createMirrorCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
MirrorCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createMirrorFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a mirror face builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createMirrorFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates
MirrorFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createMirrorPatternFace(UFModl.DfoRegion, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createMirrorSet(Tag[], int, Tag) - Method in interface nxopen.uf.UFModeling
-
- createMirrorShipStructureBuilder() - Method in interface nxopen.features.ShipCollection
-
- createMiterCorner(Tag) - Method in interface nxopen.uf.UFRoute
-
- createMmcCreateBuilder(MeshMate) - Method in interface nxopen.cae.MeshControlCollection
-
Creates a builder for the MMC Create command.
- createMode() - Method in interface nxopen.RuleManager
-
Returns the create mode flag.
- createModel(Tag) - Method in interface nxopen.uf.UFFacet
-
- createModelDisplayBuilder() - Method in interface nxopen.cae.CaePart
-
Creates a builder for model display controls command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createModelingObjectPropertyTable(String, String, String, String, int) - Method in interface nxopen.cae.ModelingObjectPropertyTableCollection
-
- createModelSetupCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating model setup check builder in a
SimPart
part
or
AssyFemPart
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX8.5.0
- createModelSubset(ResultMeasure.SubsetSelection) - Method in interface nxopen.cae.ResultMeasureCollection
-
Create a model subset for result measure
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createModelUpdateDesignVariablesRapidCreateBuilderBuilder() - Method in interface nxopen.cae.CorrelManager
-
Creates a builder for rapid creation of design variables.
- createModePairingBuilder() - Method in interface nxopen.cae.CorrelSolution
-
Creates the builder object for mode pairing editing
License requirements: nx_correl_base ("FE Correlation")
.
- createMoldCsysBuilder() - Method in interface nxopen.tooling.MoldCsysCollection
-
Creates mold csys builder
License requirements: None.
- createMoldFeatureRecognitionBuilder() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates mold feature recognition builder.
- createMoldFillingBuilder() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates Mold Filling builder.
- createMoldInsertBuilder() - Method in interface nxopen.tooling.MoldInsertCollection
-
Creates a MoldInsert builder
License requirements: None.
- createMoldProcessBuilder() - Method in interface nxopen.tooling.MoldProcessCollection
-
Creates a Mold Process builder
License requirements: None.
- createMorphRevolvedMeshBuilder() - Method in interface nxopen.cae.NodeElementManager
-
- createMotionCurvesBuilder(Part) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
MotionCurvesBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createMotionLoadsBuilder() - Method in interface nxopen.cae.SimSimulation
-
Creates a
SimMotionLoadsBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.1
- createMotionLoadsListItemBuilder() - Method in interface nxopen.cae.SimSimulation
-
Creates a
SimMotionLoadsListItemBuilder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX5.0.1
- createMotionProfileBuilder(MotionProfile) - Method in interface nxopen.mechatronics.MotionProfileCollection
-
- createMotionSensorBuilder(MotionSensor) - Method in interface nxopen.motion.MotionSensorCollection
-
Creates a
MotionSensorBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createMotionSimulationBuilder() - Method in interface nxopen.tooling.MotionSimulationCollection
-
- createMountingInterfaceBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
MountingInterfaceBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createMountPointBuilderListBuilder(Part) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
- createMoveCurveBuilder(MoveCurve) - Method in interface nxopen.features.SynchronousCurveCollection
-
Creates a
MoveCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
- createMoveEdgeBuilder(MoveEdge) - Method in interface nxopen.features.SynchronousEdgeCollection
-
Creates a
MoveEdgeBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX9.0.0
- createMoveFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Create a move face builder, don't use it until nx502
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createMoveNodeBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for move node command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createMoveObjectBuilder(MoveObject) - Method in interface nxopen.features.BaseFeatureCollection
-
- createMovePathBuilder(Part, Component) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createMoveToContainerBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
MoveToContainerBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX12.0.0
- createMoveToDrawingViewBuilder() - Method in interface nxopen.drafting.DraftingApplicationManager
-
- createMoveToPointBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Move to Point.
- createMovieSettingsBuilder() - Method in interface nxopen.MovieManager
-
- createMsetPart(CloneObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Creates the mset part.
- createMultiBendBendProperties() - Method in interface nxopen.features.sheetmetal.MultiBendBendPropertiesListBuilder
-
Create a multi bend properties.
- createMultiBladeGeometryBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a blade geometry builder
License requirements: cam_base ("CAM BASE")
.
- createMultiFlangeBuilder(MultiFlange) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
MultiFlangeBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB") OR nx_ship_detail ("Ship Detail Design")
Created in NX12.0.0
- createMultiPatchAlignmentBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
- createMultipleElementCreateBuilder(int) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the creation of multiple elements.
- createMultipleNodeCreateBuilder(int) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the creation of multiple nodes.
- createMultipleSews(Tag, int, Tag[], double) - Method in interface nxopen.uf.UFModeling
-
- CreateMultipleSewsData() - Constructor for class nxopen.uf.UFModeling.CreateMultipleSewsData
-
- createMultiPort(Point3d, Vector3d, Vector3d, DisplayableObject, double) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with a rotation vector at an absolute location.
- createMultiPort(Point3d, Vector3d) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with no rotation vector at an absolute location.
- createMultiPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Point) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with a rotation vector at a point.
- createMultiPort(Point3d, Vector3d, Point) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with no rotation vector at a point.
- createMultiPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Axis) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with a rotation vector on an axis.
- createMultiPort(Point3d, Vector3d, Axis) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with no rotation vector on an axis.
- createMultiPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, boolean) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with a rotation vector at an absolute location
License requirements: routing_base ("Routing Basic")
.
- createMultiPort(Point3d, Vector3d, boolean) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with no rotation vector at an absolute location
License requirements: routing_base ("Routing Basic")
.
- createMultiPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Point, boolean) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with a rotation vector at a point
License requirements: routing_base ("Routing Basic")
.
- createMultiPort(Point3d, Vector3d, Point, boolean) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with no rotation vector at a point
License requirements: routing_base ("Routing Basic")
.
- createMultiPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Axis, boolean) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with a rotation vector on an axis
License requirements: routing_base ("Routing Basic")
.
- createMultiPort(Point3d, Vector3d, Axis, boolean) - Method in interface nxopen.routing.MultiPortCollection
-
Creates a MultiPort with no rotation vector on an axis
License requirements: routing_base ("Routing Basic")
.
- createMultiportFromPosition(Tag, double[], boolean, double[], boolean, String) - Method in interface nxopen.uf.UFRoute
-
- createMultiToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a multi tool builder
License requirements: cam_base ("CAM BASE")
.
- createMultiTransitionLaw(UFModl.StringList, int, double[], String[], int[]) - Method in interface nxopen.uf.UFModlGeneral
-
- createMWMoldedPartValidationBuilder() - Method in interface nxopen.tooling.MWMoldedPartValidationManager
-
Creates a MWMoldedPartValidation builder
License requirements: ug_mold_design ("UG MOLD") OR ug_prod_des_advisor ("Product Design Advisor") OR prog_die_wizard ("UG/Progressive Die Wizard") OR nx_engineering_die_wizard ("NX Engineering Die Wizard") OR die_engineering ("DIE ENGINEERING") OR ug_die_design ("Die Design") OR nx_electrode_wizard ("NX Electrode Wizard")
.
- createNameBasedMaps() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Perform automatic matching based on user-defined object names.
- createNamedGroup() - Method in interface nxopen.PartImporter
-
Returns the Create Named Group flag.
- createNamingRuleSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a builder for the Set Naming Rules dialog
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createNamingSimulation(NXObject, String) - Method in interface nxopen.motion.MotionSession
-
Creates the Non-master Simulation in NX Manager mode with an input name.
- createNcapCircles() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the ncap circles should be created
License requirements: None.
- createNcapSheets() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the ncap sheets should be created
License requirements: None.
- createNCAssistantBuilder() - Method in interface nxopen.cam.CAMSetup
-
Creates NC Assistant builder
License requirements: cam_base ("CAM BASE")
.
- createNcChannelSelectionData() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates an NcChannelSelectionData object to which files and channels can be assigned.
- createNcmctPartMountingBuilder(String) - Method in interface nxopen.cam.CAMSetup
-
Creates a Part Mounting Builder.
- createNcmctPartMountingBuilder(String) - Method in interface nxopen.cam.InspectionSetup
-
Creates a Part Mounting Builder.
- createNcmPlanarBuilder() - Method in interface nxopen.cam.NCGroupCollection
-
Creates a builder for Non-Cutting Moves for Planar Milling
License requirements: cam_base ("CAM BASE")
.
- createNcmScBuilder() - Method in interface nxopen.cam.NCGroupCollection
-
Creates a builder for Non-Cutting Moves for Surface Contouring
License requirements: cam_base ("CAM BASE")
.
- createNcProgramManagerBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for the nc program manager
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createNestModuleBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createNewAfuFile(String) - Method in interface nxopen.cae.AfuManager
-
Create a new empty AFU file
License requirements: None.
- createNewAnchorPoint() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Creates the anchor point.
- createNewComponent(TaggedObject, Point3d) - Method in interface nxopen.tooling.BurringInsertBuilder
-
Create new component.
- createNewComponent(String, String) - Method in interface nxopen.tooling.DesignTrimToolBuilder
-
Create a new trim part component in the work part.
- createNewComponent(TaggedObject, Point3d) - Method in interface nxopen.tooling.FormingInsertBuilder
-
Create new component.
- createNewComponentBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
- CreateNewComponentBuilder - Interface in nxopen.assemblies
-
- createNewComponentBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
NewComponentBuilder
that creates an empty 2D Component instance and stores its
definition in local 2D Component folder
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
- CreateNewComponentBuilder.ComponentCamType - Class in nxopen.assemblies
-
Set the origin type
- CreateNewComponentBuilder.ComponentLayerOptionType - Class in nxopen.assemblies
-
Set the layer option type
- CreateNewComponentBuilder.ComponentOriginType - Class in nxopen.assemblies
-
Set the cam component type
- CreateNewComponentBuilder.ComponentReferenceSetType - Class in nxopen.assemblies
-
Set the reference set
- createNewDivisionsListItem(Port, boolean) - Method in interface nxopen.routing.SplitDuctBuilder
-
Creates a new item for the divisions list in Split Duct dialog
License requirements: routing_hvac ("Routing HVAC")
.
- createNewEffectivityRow() - Method in interface nxopen.pdm.EffectivityTableBuilder
-
Creates new effectivity row in
EffectivityTableBuilder
object
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX9.0.0
- createNewListItem(Annotation, String[]) - Method in interface nxopen.annotations.MasterSymbolBuilder
-
Create Master Symbol list item builder
License requirements: None.
- createNewListItem(CAEEdge, CAEEdge, boolean) - Method in interface nxopen.cae.DependentMeshBuilder
-
The list item
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNewListItem(CAEEdge, CAEEdge, boolean) - Method in interface nxopen.cae.ManualSweepBetweenSelection
-
- createNewListItem(CAEEdge, CAEEdge, boolean) - Method in interface nxopen.cae.Mesh3dHexBuilder
-
The list item
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNewListItem(String, String) - Method in interface nxopen.cae.SimMotionLoadsBuilder
-
Create a motion loads list item builder from link and solution name
License requirements: None.
- createNewOrder(Sketch, String, Component[]) - Method in interface nxopen.drawings.OrderManager
-
Creates an order of the 2D Components provided in the list
License requirements: nx_layout ("NX Layout")
.
- createNewPostview(int, int, boolean, Post.DisplayColorSchemeType) - Method in interface nxopen.cae.Post
-
Creates a new post view with the given display color scheme.
- createNewPostview(int, Result, boolean, Post.DisplayColorSchemeType) - Method in interface nxopen.cae.Post
-
Create a new post view with default settings on a loaded result id.
- createNewPostviewForResult(int, int, boolean, Result.ResultParameters, Post.DisplayColorSchemeType) - Method in interface nxopen.cae.Post
-
Create a new post view with specified result on a loaded result id.
- createNewPostviewForResult(int, Result, boolean, ResultParameters, Post.DisplayColorSchemeType) - Method in interface nxopen.cae.Post
-
Create a new post view with specified result on a loaded result id.
- createNewRadialBend(Point3d, int, double, Point3d, int, double) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- createNewRegion(NXObject) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Creates a new region on the landing curve to allow you to change the orientation for this area of the landing curve.
- createNewRegion() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Create a new region
License requirements: None.
- createNewRegionButton() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Button to create a new empty region
License requirements: None.
- createNewResultOptions(SimSolution, SimResultReference, Loadcase, Iteration, boolean, Iteration, Result.Type, Result.Component) - Method in interface nxopen.cae.ResultMeasureCollection
-
Create a result options for result measure
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNewRowAsLocked() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the create new row as locked option that determines whether new rows in the parts list are locked automatically on creation
License requirements: None.
- createNewRowsAsLocked - Variable in class nxopen.uf.UFPlist.Prefs
-
- createNewSketchInPlaceBuilder(Sketch) - Method in interface nxopen.SketchCollection
-
- createNewSpline(Point3d, Point3d, Point3d) - Method in interface nxopen.formboard.ShapeSegmentBuilder
-
License requirements: routing_harness ("Routing Harness")
.
- createNewSubNode(int) - Method in interface nxopen.tooling.ManufacturingGeometryBuilder
-
Create a new sub node.
- createNodalForceReportBuilder(NodalForceReport) - Method in interface nxopen.cae.SimSolution
-
Creates the builder to create and edit Nodal Force Report object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createNodalFunctionEvaluationSettingBuilder(NodalFunctionEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates nodal function evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createNode(String) - Method in interface nxopen.blockstyler.Tree
-
Creates the node but does not insert it.
- createNode() - Method in interface nxopen.geometricutilities.MultiTransitionLawBuilder
-
Creates a new law node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- createNodeAlignBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node align command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeAssociationBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node association command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeBuilder(Node) - Method in interface nxopen.diagramming.NodeCollection
-
- createNodeCreateBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node create command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeDeleteBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node delete command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeDissociationBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node dissociation command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeElementInfoBuilder() - Method in interface nxopen.cae.NodeElementInfoManager
-
Creates a builder for node element info command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeLabelMethod(boolean, int, int, int) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a node label method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeModifyLabelBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node modify label command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeModifyLocationBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node modify location command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodePoints() - Method in interface nxopen.features.RapidSurfaceBuilder
-
Creates points to record every mesh node
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- createNodeProjectBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node project command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeReflectBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for Node reflect command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodeRotateBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node rotate command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodesBetweenNodesBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node between nodes command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodesOnCurveBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for nodes on curve command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNodesRepositionBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for repositioning nodes, Use this command when you need
to modify many nodes at one time.
- createNodeTranslateBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for node translate command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNominal() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
The button used to create the nominal constructed feature
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createNonAssocHatch(int, double[], Tag, Tag, int, int) - Method in interface nxopen.uf.UFDrf
-
- createNonAssociative() - Method in interface nxopen.die.OutputCurvesBuilder
-
Creates the output curve without a feature.
- createNonmasterList() - Method in interface nxopen.pdm.PartFromPartBuilder
-
Initializes the list of non-master parts that can be saved during the
save as operation.
- createNonMasterListForCopyLogicalObject(LogicalObject) - Method in interface nxopen.pdm.PartOperationCopyBuilder
-
- createNonMasterListForLogicalObject(LogicalObject) - Method in interface nxopen.pdm.NonMasterData
-
Create NonMaster list for the selected logical Object
License requirements: None.
- createNonMasterListForLogicalObject(LogicalObject) - Method in interface nxopen.pdm.PartOperationBuilder
-
- createNonPathConnection() - Method in interface nxopen.routing.electrical.NonPathConnectionCollection
-
- createNonProportionalZoom() - Method in interface nxopen.ViewCollection
-
Creates a
NonProportionalZoom
License requirements: studio_analyze ("STUDIO ANALYZE")
Created in NX7.0.0
- createNonUniformScaledConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a non-uniform scale constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createNonUniScale(Tag, int, String[]) - Method in interface nxopen.uf.UFModeling
-
- createNormalConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometryHelp, Sketch.ConstraintGeometry, Sketch.ConstraintGeometryHelp) - Method in interface nxopen.Sketch
-
Creates a normal constraint.
- createNormalCutoutFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Normal Cutout feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createNormalToToolAxisMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Move Normal to Tool Axis
License requirements: cam_base ("CAM BASE")
.
- createNotCondition() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createNote(String[], Point3d, AxisOrientation, LetteringPreferences, UserSymbolPreferences) - Method in interface nxopen.annotations.AnnotationManager
-
Creates a note
License requirements: drafting ("DRAFTING")
.
- createNote(NoteData) - Method in interface nxopen.cae.NoteCollection
-
Creates a CAE note
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNote(String[], Point2d) - Method in interface nxopen.cae.xyplot.Plot
-
Creates a note on the plot
License requirements: None.
- createNote(int, String[], double[], int) - Method in interface nxopen.uf.UFDrf
-
- createNote(Tag, double[]) - Method in interface nxopen.uf.UFPlist
-
- createNoteFolder(String) - Method in interface nxopen.cae.NoteManager
-
Creates a folder for cae annotation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createNSidedSurfaceBuilder(NSidedSurface) - Method in interface nxopen.features.FeatureCollection
-
Creates a
NSidedSurfaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
- createNullCondition(Property, boolean, Condition.OperatorOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createNxto2dCreator() - Method in interface nxopen.DexManager
-
Create the NXTo2dCreator
License requirements: None.
- createObjectAttributeManagementBuilder() - Method in interface nxopen.tooling.ObjectAttributeManagementCollection
-
Creates object attribute management builder.
- createObjectAttributeReferenceBuilder() - Method in interface nxopen.formboard.FormboardManager
-
- createObjectBuilder() - Method in interface nxopen.assemblies.productinterface.Collection
-
- createObjectBuilderWithVersion(int) - Method in interface nxopen.assemblies.productinterface.Collection
-
Create Product Interface Object Builder
License requirements: None.
- createObjectCreateBuilder(String[], String[]) - Method in interface nxopen.pdm.PdmSession
-
- createObjectEvaluatorBuilder(Part, ExpressionEvaluator) - Method in interface nxopen.ame.AMEManager
-
Creates a
ObjectEvaluatorBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createObjectGeneralPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
-
Create the ObjectGeneralPropertiesBuilder
License requirements: None.
- createObjectList() - Method in interface nxopen.Part
-
Creates an empty list that can be populated with any NXObject
License requirements: None.
- createObjectNotes(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Create Notes.
- createObjectSinkBuilder(ObjectSink) - Method in interface nxopen.mechatronics.ObjectSinkCollection
-
- createObjectSourceBuilder(ObjectSource) - Method in interface nxopen.mechatronics.ObjectSourceCollection
-
- createObjectsUdeSet(CAMObject[], CAMSetup.Ude) - Method in interface nxopen.cam.CAMSetup
-
Create ObjectsUdeSet.
- createObjectsUdeSet(CAMObject[], CAMSetup.Ude, CAMFeature[]) - Method in interface nxopen.cam.CAMSetup
-
Create ObjectsUdeSet for features
License requirements: cam_base ("CAM BASE")
.
- createObjectsUdeSet(CAMObject[], CAMSetup.Ude) - Method in interface nxopen.cam.InspectionSetup
-
Create ObjectsUdeSet.
- createObjectTransformerBuilder(ObjectTransformer) - Method in interface nxopen.mechatronics.ObjectTransformerCollection
-
- createObjectWorkInstructionBuilder(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Create Object Work Instruction builder for authoring Work Instructions.
- createObjFromPsTag(Tag) - Method in interface nxopen.uf.UFPs
-
- createOccurrenceBuilder(MeshCollectorOccurrence) - Method in interface nxopen.cae.MeshManagerOccurrence
-
Creates a mesh collector occurrence builder for the mesh collector occurrence overrides
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOcfFeature(UFCurve.OcfData) - Method in interface nxopen.uf.UFCurve
-
- createOffctrptCx(UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
-
- createOffctrptCy(UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
-
- createOffctrptFx(UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
-
- createOffctrptFy(UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
-
- createOffctrptNx(UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
-
- createOffctrptNy(UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
-
- createOffcylClineObj(UFDrf.Object, UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
-
- createOffcylClineOff(UFDrf.Object, UFDrf.Object, double) - Method in interface nxopen.uf.UFDrf
-
- createOffset(Point3d, Vector3d, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
Create an
Offset
without parameters.
- createOffset(Direction, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
- createOffset(Offset, Xform, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
Creates a
Offset
via an extract
Offset
with optional transformation.
- createOffset3dCurveBuilder(Offset3DCurve) - Method in interface nxopen.features.CurveFeatureCollection
-
Creates a
Offset3DCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX10.0.0
- createOffset3Scalars(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createOffsetCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createOffsetCenterPointBuilder(OffsetCenterPoint) - Method in interface nxopen.annotations.OffsetCenterPointCollection
-
Creates the OffsetCenterPointBuilder
License requirements: drafting ("DRAFTING")
.
- createOffsetCsysFromSeed() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Create offset CSYS from seed CSYS
License requirements: None.
- createOffsetCurve() - Method in interface nxopen.weld.WeldPointBuilder
-
Create offset curve
License requirements: ugweld ("UG WELD")
.
- createOffsetCurve3dBuilder() - Method in interface nxopen.tooling.CAMDataManager
-
- createOffsetCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
OffsetCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX5.0.0
- createOffsetCurveCvtr(Tag, UFSo.UpdateOption, UFSo.OffsetCurveCvtrData) - Method in interface nxopen.uf.UFSo
-
- createOffsetCylindrical(Scalar, Scalar, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
Creates a smart cylindrical
Offset
.
- createOffsetCylindrical(Tag, UFSo.UpdateOption, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createOffsetData() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the offset data should be created
License requirements: None.
- createOffsetDatumPlane() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Create offset datum plane
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- createOffsetDatumPlaneForSketch() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Create offset datum plane for sketch.
- createOffsetDirDist(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createOffsetDouble(Tag, UFSo.UpdateOption, double[]) - Method in interface nxopen.uf.UFSo
-
- createOffsetDoublePnt(Tag, UFSo.UpdateOption, double[], double[]) - Method in interface nxopen.uf.UFSo
-
- createOffsetEdgeBuilder(OffsetEdge) - Method in interface nxopen.features.SynchronousEdgeCollection
-
Creates a
OffsetEdgeBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX9.0.0
- createOffsetEmbossBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Offsetemboss builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createOffsetExpressions() - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilder
-
Create offset expressions for each boundary.
- createOffsetExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createOffsetFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
OffsetFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createOffsetFacetBodyBuilder(OffsetFacetBody) - Method in interface nxopen.features.ToolingFeatureCollection
-
- createOffsetMidsrf(Tag, double, double) - Method in interface nxopen.uf.UFSf
-
- createOffsetMoveCurveBuilder(OffsetMoveCurve) - Method in interface nxopen.features.SynchronousCurveCollection
-
Creates a
OffsetMoveCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
- createOffsetRectangular(Scalar, Scalar, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
Create an
Offset
using X, Y and Z deltas.
- createOffsetRegion(UFModl.DfoRegion, String) - Method in interface nxopen.uf.UFModlFeatures
-
- createOffsetRegionBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates an offset region builder, don't use it until nx502
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createOffsetSpherical(Scalar, Scalar, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.OffsetCollection
-
Creates a smart spherical
Offset
.
- createOffsetSpherical(Tag, UFSo.UpdateOption, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createOffsetSurfaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates an Offset Surface builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createOffsetSurfCvtr(Tag, UFSo.UpdateOption, UFSo.OffsetSurfCvtrData) - Method in interface nxopen.uf.UFSo
-
- createOffSheetConnectorBuilder(Part, OffSheetConnector) - Method in interface nxopen.pid.PidManager
-
- createOilPanBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createOilPanBuilder(OilPan) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
OilPanBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createOnArcAngle(Tag, Tag, Tag) - Method in interface nxopen.uf.UFPoint
-
- createOnCurve(Tag, Tag) - Method in interface nxopen.uf.UFPoint
-
- createOneDimensionalElementSplitBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for one dimensional element split command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOnestepBuilder(Feature) - Method in interface nxopen.bodydes.OnestepUnformCollection
-
Creates an Onestep Unform builder.
- createOnPathDimBuilder(Section, Point3d) - Method in interface nxopen.geometricutilities.AlignmentMethodBuilder
-
Set the sections.
- createOnSurface(Tag, Tag, Tag) - Method in interface nxopen.uf.UFPoint
-
- createOpcclientBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createOpenDuctMeshBuilder(RecipeOpenDuctMesh) - Method in interface nxopen.cae.NodeElementManager
-
Creates a
OpenDuctMeshBuilder
License requirements: sc_acou_meshing (" SC Acoustic Meshing")
Created in NX12.0.0
- createOperandRuleBuilder(Part, PlcCodePosition, PlcBlock, int, int, PlcRule.Type) - Method in interface nxopen.ame.AMEManager
-
Creates a
OperandRuleBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createOperationBuilder(PartOperationBuilder.OperationType) - Method in interface nxopen.pdm.PdmSession
-
- createOperationSetTeaching(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Creates a CAM.OperationSetTeaching
License requirements: cam_base ("CAM BASE")
Created in NX10.0.2
NX_REMOVE_FROM_JAVA_API
- createOperationTeaching(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Creates a CAM.OperationTeaching
License requirements: cam_base ("CAM BASE")
Created in NX8.0.0
- createOperationTransformBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Create Transform builder.
- createOperatorRuleBuilder(Part, PlcCodePosition, PlcBlock, PlcRule.Type, PlcRule.RefObjectType, PlcRule.ReplacementType, int, int, int) - Method in interface nxopen.ame.AMEManager
-
Creates a
OperatorRuleBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createOpmessage(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createOpSkip(UFVariant, UFPath.OpSkip, String) - Method in interface nxopen.uf.UFPath
-
- createOpStop(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createOpticalAnnotationSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createOpticalConnectionSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createOptimizationAttributeBuilder() - Method in interface nxopen.optimization.OptimizationCollection
-
Create builder for OptimizationAttribute class
License requirements: None.
- createOptimizationBuilder(DAOSolution) - Method in interface nxopen.cae.optimization.DAOSolutionCollection
-
Creates the builder object of optimization solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createOptimizationBuilder() - Method in interface nxopen.optimization.OptimizationCollection
-
Create builder for optimization class
License requirements: None.
- createOptimizeCurveBuilder() - Method in interface nxopen.features.FeatureCollection
-
Creates a
OptimizeCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX10.0.0
- createOptimizeFaceBuilder() - Method in interface nxopen.features.FeatureCollection
-
Creates a
OptimizeFaceBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX7.0.0
- createOptimizeTraverseGroupBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a optimize traverse group builder
License requirements: cam_base ("CAM BASE")
.
- createOptimOptionsBuilder() - Method in interface nxopen.cae.ModelUpdateSolution
-
Creates the builder object of model update optimize options
License requirements: nx_correl_update ("FE Model Update")
.
- createOption() - Method in interface nxopen.cae.MeshPointMultipleOnCurveBuilder
-
Returns the create option
License requirements: None.
- createOptionAttributeListEntry(boolean, boolean, boolean, String, int, int, String, String, String[]) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
- createOptionAttributeListEntry(boolean, boolean, boolean, boolean, String, int, int, String, String, String[]) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
Create an option attribute list entry and add it to the list.
- createOptionsBuilder() - Method in interface nxopen.cae.ModelUpdateSolution
-
Creates the builder object of model update options
License requirements: nx_correl_update ("FE Model Update")
.
- createOrCondition() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createOrddimension(Tag, int, UFDrf.Object, double, double, UFDrf.Text, int, double[]) - Method in interface nxopen.uf.UFDrf
-
- createOrderAspectsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
OrderAspectsBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createOrderedEdgeElemMethod(CAEEdge, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedEdgeElemMethod(Line, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedEdgeElemMethod(Arc, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedEdgeElemMethod(Conic, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedEdgeElemMethod(Spline, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedEdgeNodeMethod(CAEEdge, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedEdgeNodeMethod(Line, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedEdgeNodeMethod(Arc, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedEdgeNodeMethod(Conic, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedEdgeNodeMethod(Spline, boolean, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered edge node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedFeatureEdgeElemMethod(FEElemEdge, boolean, boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createOrderedFeatureEdgeElemMethod(FEElemEdge, boolean, boolean, boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered feature edge elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderedFeatureEdgeNodeMethod(FEElemEdge, boolean, boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createOrderedFeatureEdgeNodeMethod(FEElemEdge, boolean, boolean, boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a ordered feature edge node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createOrderMarker(double) - Method in interface nxopen.cae.xyplot.ColorMapGraph
-
Creates the display order marker on the color map graph.
- createOrdinateDim(Tag, int, Tag, int, int, double, double, String, int, String[], int, double[]) - Method in interface nxopen.uf.UFDrf
-
- createOrdinateDimensionBuilder(OrdinateDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createOrdinateMargin(int, Tag, Tag, double[], double[], double) - Method in interface nxopen.uf.UFDrf
-
- createOrdinateOrigin(NXObject, Point3d) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
The method to create ordinate origin
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createOrdinateOrigin(int, TaggedObject, Point3d) - Method in interface nxopen.tooling.HoleReportBuilder
-
Create Ordinate Origin
License requirements: None.
- createOrdinateOrigin(Tag, int, int, int, int, int, String) - Method in interface nxopen.uf.UFDrf
-
- createOrdinateOriginDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates an ordinate origin dimension
License requirements: drafting ("DRAFTING")
.
- createOrdinateOriginMargins(NXObject, NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
The method to create ordinate origin margins
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createOrdmargin(int, Tag, UFDrf.Object, double[], double[], double) - Method in interface nxopen.uf.UFDrf
-
- createOrdorigin(UFDrf.Object, int, int, int, String) - Method in interface nxopen.uf.UFDrf
-
- createOrientationDefinitionBuilder(OrientationDefinition) - Method in interface nxopen.features.ShipCollection
-
- createOrientBranchBuilder() - Method in interface nxopen.formboard.FormboardManager
-
- createOrigin(UFVariant, double[], String) - Method in interface nxopen.uf.UFPath
-
- createOrModifyAttribute() - Method in interface nxopen.pdm.PartOperationAttributePropertiesBuilder
-
Create the attribute from the data set in the builder.
- createOutputFeatureData(Feature) - Method in interface nxopen.features.CustomFeaturePostUpdateEvent
-
Create output feature data
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createOutputGroup(TaggedObject[]) - Method in interface nxopen.cae.CaeGroupCollection
-
Create a Output Group
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createOverallWeightsBuilder() - Method in interface nxopen.cae.ModelUpdateSolution
-
Creates the builder object of model update overall weights
License requirements: nx_correl_update ("FE Model Update")
.
- createOvercrownFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Overcrown feature builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createOverlayData() - Method in interface nxopen.DrawingCompareManager
-
Creates Overlay data of a part.
- createOverlayDataWithSnapshotData() - Method in interface nxopen.drawings.TrackDrawingChangesGeneralBuilder
-
Returns the create overlay data with snapshot data
License requirements: None.
- createOverrideBuilder(Override) - Method in interface nxopen.validate.ResultObject
-
Creates a
OverrideBuilder
License requirements: ug_checkmate ("UG Check Mate")
Created in NX8.5.0
- CreateOverridePartBuilder - Interface in nxopen.assemblies
-
Represents a builder class that creates empty override part in the specified design elements.
- createOverridePartBuilder(Part) - Method in interface nxopen.CollaborativeContentManager
-
- createOverstockApplication(ControlPoint, ISegment[], Stock[], CharacteristicList, WrapApplicationType, Expression) - Method in interface nxopen.routing.OverstockApplicationCollection
-
- createOverstockApplication(ControlPoint, ISegment[], Stock[], Expression, Expression, Expression, Expression, Expression, Point, CharacteristicList, WrapApplicationType, Expression) - Method in interface nxopen.routing.OverstockApplicationCollection
-
- createOverstockApplication(ControlPoint, ISegment[], Stock[], Point, Point, CharacteristicList, WrapApplicationType, Expression) - Method in interface nxopen.routing.OverstockApplicationCollection
-
- createOverstockApplication(ControlPoint, ISegment[], Stock[], Point, PointDefinition, Expression, CharacteristicList, WrapApplicationType, Expression) - Method in interface nxopen.routing.OverstockApplicationCollection
-
- createOverstockBuilder(Overstock) - Method in interface nxopen.routing.RouteManager
-
- createOverstockFacesBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
OverstockFacesBuilder
to qualify faces
of fittings for overstock application
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX7.5.0
- createPageBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
PageBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createPageNamingBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
PageNamingBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createPaintBrushBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
- createPaintFacetBodyBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
- createPaintParametersBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createPair(NXObject, MotionObject) - Method in interface nxopen.motion.AdoptionPairCollection
-
Creates a
AdoptionPair
License requirements: mechanisms ("MECHANISMS")
Created in NX11.0.0
- createPairedInfiniteLine(Line) - Method in interface nxopen.CurveCollection
-
Creates a paired
InfiniteLine
that is paired to the specified line.
- createParabola(Point3d, double, double, double, double, NXMatrix) - Method in interface nxopen.CurveCollection
-
- createParabola(Point3d, Vector3d, Vector3d, double, double, double) - Method in interface nxopen.CurveCollection
-
- createParallelBuilder(Parallel) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ParallelBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createParallelConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a parallel constraint.
- createParallelDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createParallelDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a parallel dimension
License requirements: drafting ("DRAFTING")
.
- createParameter(OperatorRuleBuilder.ParameterType, int) - Method in interface nxopen.ame.OperatorRuleBuilder
-
Create new parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createParameter() - Method in interface nxopen.ame.PlcMethodBuilder
-
Add a parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createParameterRuleBuilder(Part, MultiValueObjectsPort, PlcRule.Type, MultiValueObjectsPort.JaAmeValueObjectUsageType) - Method in interface nxopen.ame.AMEManager
-
Creates a
ParameterRuleBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createParametricBlank(Tag, UFParam.TurnWorkpieceType, UFParam.TurnWorkpieceDirection, Tag, double, double, double) - Method in interface nxopen.uf.UFTurn
-
- createParasolidImporter() - Method in interface nxopen.ImportManager
-
Creates a Parasolid importer object.
- createParentEvaluatorBuilder(Part, ExpressionEvaluator) - Method in interface nxopen.ame.AMEManager
-
Creates a
ParentEvaluatorBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createParser(String) - Method in interface nxopen.validate.ValidationManager
-
Creates a parser.
- createPartCreationObject() - Method in interface nxopen.pdm.PartBuilder
-
Create an instance of a
PartCreationObject
class that acts as a proxy for a part in NX Manager mode prior to that part
being created.
- createPartDescriptor(RoutePartDescriptor.SourceType, RoutePartDescriptor.CharxType, String, String) - Method in interface nxopen.routing.RoutePartDescriptorCollection
-
- createPartFamily(Part.PartFamilyAttributeData[], PartFamilyMemberData) - Method in interface nxopen.Part
-
- createPartFamily() - Method in interface nxopen.partfamily.TemplateManager
-
Creates a part family associated with the owning part
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createPartIdentificationBuilder(PartIdentification) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPartImporter() - Method in interface nxopen.ImportManager
-
Creates a part importer object.
- createPartingLinesToggle() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Returns the create parting lines toggle
License requirements: None.
- createPartition() - Method in interface nxopen.uf.UFPs
-
- createPartitionSearchTerm(SearchTerm.SearchTermLogicType, Partition) - Method in interface nxopen.assemblies.SubsetRecipe
-
- createPartitionSearchTerm(SearchTerm.SearchTermLogicType, PartitionSearchTerm.IncludeChildren, Partition) - Method in interface nxopen.assemblies.SubsetRecipe
-
Creates a
PartitionSearchTerm
and
adds it to the recipe at the end of the list of search terms.
- createPartitionSearchTermGroup(SearchTerm.SearchTermLogicType, Partition[]) - Method in interface nxopen.assemblies.SubsetRecipe
-
- createPartitionSearchTermGroup(SearchTerm.SearchTermLogicType, PartitionSearchTerm.IncludeChildren, Partition[]) - Method in interface nxopen.assemblies.SubsetRecipe
-
- createPartModuleBuilder(PartModule) - Method in interface nxopen.features.FeatureCollection
-
Creates a
PartModuleBuilder
License requirements: usr_defined_features ("USER DEFINED FEATURES")
Created in NX8.0.0
- createPartModuleInputBuilder() - Method in interface nxopen.features.PartModule
-
Creates part module input builder
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- createPartModuleOutputBuilder() - Method in interface nxopen.features.PartModule
-
- createPartModuleOutputBuilder1() - Method in interface nxopen.features.PartModule
-
Creates new part module output builder
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- createPartModuleRelationshipBuilder(PartModule) - Method in interface nxopen.features.FeatureCollection
-
- createPartOccurrenceToPlace(String, int) - Method in interface nxopen.mechanicalrouting.PartPlacementBuilder
-
Creates the
Component
for part to place with given reference set and layer.
- createPartOperationAttributePropertiesBuilder(NXObject[]) - Method in interface nxopen.pdm.PdmSession
-
- createPartOperationValidationPropertiesBuilder(NXObject[]) - Method in interface nxopen.pdm.PdmSession
-
- createPartPlacementBuilder(Part, Component) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createPartsList(int[], Point3d) - Method in interface nxopen.tooling.BomListBuilder
-
Creates parts list for the assembly.
- createPartSpec(String, String, String, String, String) - Method in interface nxopen.pdm.PartBuilder
-
Create the specification for the new part that will be created.
- createPartSymbolFolderBuilder(PartSymbolFolder) - Method in interface nxopen.annotations.PartSymbolFolderCollection
-
Creates part symbol folder builder instance
License requirements: None.
- createPassenger(BaseDataPassengerBuilder) - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
- createPasteBuilder() - Method in interface nxopen.ClipboardOperationsManager
-
Creates a Paste builder object.
- createPasteBuilder() - Method in interface nxopen.tooling.ReusableObjectManager
-
Creates a ReusableObjectPasteBuilder
License requirements: None.
- createPasteCageData() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createPasteFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a paste face builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createPasteSpecialBuilder() - Method in interface nxopen.ClipboardOperationsManager
-
Creates a Paste Special builder object.
- createPatchBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
PatchBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createPatchOpeningsBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createPath() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Creates path curves for use by the orientation definition object
License requirements: None.
- createPathArrangementBuilder() - Method in interface nxopen.routing.RouteManager
-
- CreatePathBuilder - Interface in nxopen.mechanicalrouting
-
- createPathConnection() - Method in interface nxopen.routing.electrical.PathConnectionCollection
-
- createPathConstraintJointBuilder(PathConstraintJoint) - Method in interface nxopen.mechatronics.PathConstraintJointCollection
-
- createPathCurve(NXObject[]) - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Sets the landing curve that is being processed into the builder.
- createPathCurves() - Method in interface nxopen.features.shipdesign.ProfileSystemBuilder
-
Creates path curves for all the paths of the profile system.
- CreatePathData() - Constructor for class nxopen.features.shipdesign.StiffenerBuilder.CreatePathData
-
- createPathFromElemIds(int, String, int[]) - Method in interface nxopen.cae.Post
-
- createPathFromNodeIds(int, String, int[]) - Method in interface nxopen.cae.Post
-
- createPathFromOpening() - Method in interface nxopen.features.PatchOpeningsBuilder
-
Create a closed curve (path) from the currently selected opening.
- CreatePathFromOpeningData() - Constructor for class nxopen.features.PatchOpeningsBuilder.CreatePathFromOpeningData
-
- createPathFromPoints(int, String, double[], int) - Method in interface nxopen.cae.Post
-
- createPathLengthAnnotationBuilder(Annotation) - Method in interface nxopen.formboard.FormboardManager
-
- createPathObjects() - Method in interface nxopen.fields.FieldManager
-
- createPaths() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Creates paths for the selected features.
- createPathsEnum() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the create paths enum
License requirements: None.
- createPathStockBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a path stock builder.
- createPathTransitionBuilder(Part) - Method in interface nxopen.mechanicalrouting.PathTransitionListManagerBuilder
-
- createPathTransitionManagerBuilder(Part, Component, Part) - Method in interface nxopen.mechanicalrouting.CreatePathBuilder
-
- createPatternComponent(boolean) - Method in interface nxopen.tooling.AddReusablePart
-
Create the pattern component when the positioining pattern sketch feature is not exsit; edit pattern component when the positioining pattern feature is exsit
License requirements: None.
- createPatternComponent(boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Create the pattern component when the positioining pattern sketch feature is not exsit; edit pattern component when the positioining pattern feature is exsit
License requirements: None.
- createPatternFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a pattern face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createPatternFaceFeatureBuilder(PatternFaceFeature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
PatternFaceFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX9.0.0
- createPatternFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates
PatternFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.0.0
- createPatternGeometryBuilder(PatternGeometry) - Method in interface nxopen.features.FeatureCollection
-
- createPatternIncrementItem() - Method in interface nxopen.geometricutilities.PatternIncrementsList
-
- createPatternIncrementItem(Expression) - Method in interface nxopen.geometricutilities.PatternIncrementsList
-
- createPatternInstanceEditBuilder() - Method in interface nxopen.geometricutilities.PatternDefinition
-
- createPatternObjects(boolean) - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Creates the pattern objects
License requirements: None.
- createPatternSpacingsListItem() - Method in interface nxopen.geometricutilities.PatternSpacingsList
-
- createPeakValueEvaluationSettingBuilder(PeakValueEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates peak value evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createPedestrianProtectionBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createPedestrianProtectionBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createPedestrianProtectionBuilder(PedestrianProtection) - Method in interface nxopen.features.VehicleDesignCollection
-
- createPenetrationAssociationBuilder(boolean, PenetrationRequest) - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
-
- createPenetrationAssociationBuilder(PenetrationRequestBuilder.RequestDialogType, PenetrationRequest) - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
-
- createPenetrationAttachment(PenetrationSite) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Creates a
PenetrationAttachment
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- createPenetrationCutoutBuilder(PenetrationRequest) - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
-
Creates a
PenetrationCutoutBuilder
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- createPenetrationFolder(PenetrationFolder) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Creates a
PenetrationFolder
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- createPenetrationList(PenetrationSite) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Creates a
PenetrationList
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- createPenetrationRequestBuilder(PenetrationRequest) - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
-
- createPenetrationRequestForCutoutBuilder() - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
-
- createPenetrationReviewRequestBuilder(PenetrationRequest[]) - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
-
- createPenetrationSite(Part) - Method in interface nxopen.features.shipdesign.PenetrationUtils
-
Creates a
PenetrationSite
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.0.0
- createPerimeterDimension(Curve[], Point3d, Expression) - Method in interface nxopen.Sketch
-
Creates a perimeter dimension constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createPerpendicularBuilder(Perpendicular) - Method in interface nxopen.features.FeatureCollection
-
Creates a
PerpendicularBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createPerpendicularConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a perpendicular constraint.
- createPerpendicularDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createPerpendicularDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a perpendicular dimension
License requirements: drafting ("DRAFTING")
.
- createPerspectiveOptionsBuilder() - Method in interface nxopen.BasePart
-
Creates a builder for the Perspective Options dialog
License requirements: None.
- createPhysicalMaterialBuilder(PhysicalMaterial.Type) - Method in interface nxopen.PhysicalMaterialCollection
-
Creates a PhysMat.PhysicalMaterialBuilder used to create a physical materials of a given type
License requirements: None.
- createPhysicalMaterialEditBuilder(PhysicalMaterial) - Method in interface nxopen.PhysicalMaterialCollection
-
Creates a PhysMat.PhysicalMaterialBuilder used to edit physical materials.
- createPhysicalMaterialInspectBuilder(PhysicalMaterial) - Method in interface nxopen.PhysicalMaterialCollection
-
Creates a PhysMat.PhysicalMaterialBuilder used to inspect physical materials.
- createPhysicalPropertyTable(String, String, String, String, int) - Method in interface nxopen.cae.PhysicalPropertyTableCollection
-
Creates a
PhysicalPropertyTable
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX5.0.0
- createPhysicsConversionBuilder(NXObject) - Method in interface nxopen.motion.MotionSession
-
- createPiercingInsertBuilder() - Method in interface nxopen.tooling.PiercingInsertCollection
-
Creates create piercing insert builder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- createPiercingInsertMiniToolsBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
- createPillarBuilder(Pillar) - Method in interface nxopen.features.ShipCollection
-
Creates a
PillarBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createPillarSystemBuilder(PillarSystem) - Method in interface nxopen.features.ShipCollection
-
- createPinJigBuilder(PinJig) - Method in interface nxopen.features.ShipCollection
-
Creates a
PinJigBuilder
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX10.0.0
- createPipe() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Create the tube from the given inputs.
- createPipeBuilder(Part, Pipe) - Method in interface nxopen.pid.PidManager
-
- createPipeStock(String, String, String, String) - Method in interface nxopen.diagramminglibraryauthor.PipeStockBuilder
-
Creates a new pipe stock
License requirements: None.
- createPipingComponentFileBuilder(Part) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createPipNode(UFSmd.PipNodeData) - Method in interface nxopen.uf.UFSmd
-
- createPivotSet(double, double, Curve, Curve) - Method in interface nxopen.features.StyledSweepBuilder
-
Creates a new pivot set
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- createPlaceAutomationBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
PlaceAutomationBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createPlacementSolutionsBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a placement solutions builder used to position a part that has been placed in the assembly.
- createPlacePartBuilder(String, int, Point3d, TaggedObject) - Method in interface nxopen.routing.RouteManager
-
Creates a
PlacePartBuilder
that is used to place
a routing part into an assembly.
- createPlacePartBuilderFS(String, CharacteristicList, Point3d, TaggedObject, boolean) - Method in interface nxopen.routing.RouteManager
-
Creates a
PlacePartBuilder
that is used to place
a routing part into an assembly.
- createPlacePartBuilderPTS(TaggedObject, TaggedObject, Point3d, TaggedObject) - Method in interface nxopen.routing.RouteManager
-
Creates a
PlacePartBuilder
that is used to place
a routing part into an assembly.
- createPlanarJointBuilder(PlanarJoint) - Method in interface nxopen.mechatronics.PlanarJointCollection
-
- createPlanarMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a planar milling planar operation builder
License requirements: cam_base ("CAM BASE")
.
- createPlanarSegment(String, int) - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
- createPlanarShipGridBuilder(PlanarShipGrid) - Method in interface nxopen.display.GridCollection
-
- createPlane(Point3d, Vector3d, SmartObject.UpdateOption) - Method in interface nxopen.PlaneCollection
-
Creates a
Plane
without parameters.
- createPlane(Feature) - Method in interface nxopen.PlaneCollection
-
Creates a
Plane
using a datum plane feature.
- createPlane(PlaneTypes.MethodType, PlaneTypes.AlternateType, Point3d, Vector3d, String, boolean, boolean, NXObject[]) - Method in interface nxopen.PlaneCollection
-
Creates a
Plane
using a datum plane feature.
- createPlane(double[], double[]) - Method in interface nxopen.uf.UFModeling
-
- createPlane() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the option to control if a reference datum plane should be output with the this feature.
- createPlaneForList() - Method in interface nxopen.features.shipdesign.FeatureParmsBuilder
-
- createPlaneGridBuilder(PlaneGrid) - Method in interface nxopen.display.GridCollection
-
- createPlanePairBuilder() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
- createPlaneSearchTerm(SearchTerm.SearchTermLogicType, PlaneSearchTerm.PlaneOverlapLogicType, Vector3d, double, Point3d, boolean) - Method in interface nxopen.assemblies.SubsetRecipe
-
Creates a
PlaneSearchTerm
and
adds it to the recipe at the end of the list of search terms.
- createPlaneSearchTermBuilder(PlaneSearchTerm) - Method in interface nxopen.assemblies.SubsetCollection
-
- createPlaneZone(Tag, String, double[], double[], Tag) - Method in interface nxopen.uf.UFFltr
-
- createPlantInputBuilder(PlantInput) - Method in interface nxopen.motion.PlantInputCollection
-
Creates a
PlantInputBuilder
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
Created in NX6.0.0
- createPlantOutputBuilder(PlantOutput) - Method in interface nxopen.motion.PlantOutputCollection
-
Creates a
PlantOutputBuilder
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
Created in NX6.0.0
- createPlateBoundaryOptionBuilder() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
- createPlateBuilder(Plate) - Method in interface nxopen.features.ShipCollection
-
- createPlateChamferBuilder(PlateChamfer) - Method in interface nxopen.features.ShipCollection
-
Creates a
PlateChamferBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createPlateDivideBuilder(PlateDivide) - Method in interface nxopen.features.ShipCollection
-
- createPlatePreparationBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
PlatePreparationBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createPlateSystemBuilder(PlateSystem) - Method in interface nxopen.features.ShipCollection
-
Creates a
PlateSystemBuilder
License requirements: nx_ship_basic ("Ship Basic Design")
Created in NX8.0.0
- createPlatformCreatorBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
PlatformCreatorBuilder
which creates accessways platform
License requirements: routing_platform ("Routing Platform")
Created in NX8.5.0
- createPlatformCreatorBuilder(PlatformFeature) - Method in interface nxopen.routing.RouteManager
-
Creates an Platform builder.
- createPlcMemoryAreaBuilder(Part, AMEBaseNode) - Method in interface nxopen.ame.AMEManager
-
Creates a
PlcMemoryAreaBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createPlcMethodBuilder(Part, PlcMethod) - Method in interface nxopen.ame.AMEManager
-
Creates a
PlcMethodBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createPlcRack(NXObject, String) - Method in interface nxopen.ame.AMEManager
-
Creates a object of plc rack under provided station
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createPlcStation(String, AMEManager.CreateStationType) - Method in interface nxopen.ame.AMEManager
-
Creates a object of plc central station
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createPlcSymbolBuilder(Part, AMEBaseNode) - Method in interface nxopen.ame.AMEManager
-
Creates a
PlcSymbolBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createPlcSymbolsEvaluatorBuilder(Part, ExpressionEvaluator) - Method in interface nxopen.ame.AMEManager
-
- createPlcVendorSymbolBuilder(Part, NXObject) - Method in interface nxopen.ame.AMEManager
-
Creates a
PlcVendorSymbolBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createPlotBuilder() - Method in interface nxopen.PlotManager
-
Create the PlotBuilder
License requirements: None.
- createPlotObject() - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
Returns
NxBcPlotContours
object
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX8.5.0
- createPlotObject() - Method in interface nxopen.cae.ThicknessPlotContoursBuilder
-
Returns
ThicknessPlotContours
object
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX8.5.0
- createPlugSlotBuilder(Feature) - Method in interface nxopen.weld.WeldManager
-
- createPlungeMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a planar milling plunge operation builder
License requirements: cam_base ("CAM BASE")
.
- createPmdcMotorBuilder(PMDCMotor) - Method in interface nxopen.motion.PMDCMotorCollection
-
Return
PMDCMotorBuilder
object
License requirements: nx_motion_motor ("NX Motion Motor")
Created in NX6.0.0
- createPmiAngularDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiArcLengthDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI arc length dimension
License requirements: geometric_tol ("GDT")
.
- createPmiAttributeBuilder(PmiAttribute) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiAttributeValueIntegerBuilder(PmiAttributeValueInteger) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiAttributeValueListBuilder(PmiAttributeValueList) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiAttributeValueMultipleStringBuilder(PmiAttributeValueMultipleString) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiAttributeValueNumberBuilder(PmiAttributeValueNumber) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiAttributeValueStringBuilder(PmiAttributeValueString) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiAttributeValueUrlBuilder(PmiAttributeValueUrl) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiBoltCircleCenterlineBuilder(PmiBoltCircleCenterline) - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the PMI BoltCircleCenterline builder
License requirements: None.
- createPmiCenterline3dBuilder(PmiCenterline3d) - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the Pmi 3D Centerline builder
License requirements: None.
- createPmiCenterMarkBuilder(PmiCenterMark) - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the Pmi CenterMark Builder
License requirements: None.
- createPmiChamferDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI chamfer dimnension
License requirements: geometric_tol ("GDT")
.
- createPmiChamferDimensionBuilder(PmiChamferDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiConcentricCircleDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI concentric circle dimension
License requirements: geometric_tol ("GDT")
.
- createPmiCurveLengthDimensionBuilder(PmiArcLengthDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiCustomSymbol(CustomSymbolData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.CustomSymbolCollection
-
- createPmiCustomSymbolBuilder(PmiCustomSymbol) - Method in interface nxopen.annotations.CustomSymbolCollection
-
Creates the PMI Symbol Placement builder
License requirements: None.
- createPmiCylindricalDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI cylindrical dimension
License requirements: geometric_tol ("GDT")
.
- createPmiDatumFeatureSymbolBuilder(Datum) - Method in interface nxopen.annotations.GdtDatumCollection
-
- createPmiDatumTargetBuilder(DatumTarget) - Method in interface nxopen.annotations.AnnotationManager
-
- createPmiDiameterDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI diameter dimension
License requirements: geometric_tol ("GDT")
.
- createPmiFeatureControlFrameBuilder(Fcf) - Method in interface nxopen.annotations.AnnotationManager
-
- createPmiFoldedRadiusDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI folded radius dimension
License requirements: geometric_tol ("GDT")
.
- createPmiHoleDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI hole dimension
License requirements: geometric_tol ("GDT")
.
- createPmiHorizontalBaselineDimension(DimensionData, PmiData[], Xform, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
-
Creates a PMI horizontal baseline dimension.
- createPmiHorizontalChainDimension(DimensionData, PmiData[], Xform, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
-
Creates a PMI horizontal chain dimension.
- createPmiHorizontalDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI horizontal dimension
License requirements: geometric_tol ("GDT")
.
- createPmiHorizontalOrdinateAutoDimension(DimensionData, PmiData, Xform, Point3d, boolean, boolean) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI horizontal ordinate automatic dimension
License requirements: geometric_tol ("GDT")
.
- createPmiHorizontalOrdinateDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI horizontal ordinate dimension
License requirements: geometric_tol ("GDT")
.
- createPmiIntegerBuilder(PmiInteger) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiLabel(LabelData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.LabelCollection
-
Creates a PMI label
License requirements: geometric_tol ("GDT")
.
- createPMILabel(Point3d, DisplayableObject) - Method in interface nxopen.geometricanalysis.SlopeAnalysisBuilder
-
Create a PMI label.
- createPmiLinearDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiLineWeld(LineWeldData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.WeldCollection
-
Creates a PMI line weld.
- createPmiLineWeldBuilder(PmiLineWeld) - Method in interface nxopen.annotations.WeldCollection
-
Creates a
PmiLineWeldBuilder
License requirements: geometric_tol ("GDT")
Created in NX6.0.0
- createPmiMajorAngularDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI major angular dimension
License requirements: geometric_tol ("GDT")
.
- createPmiMajorAngularDimensionBuilder(BaseAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiMinorAngularDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI minor angular dimension
License requirements: geometric_tol ("GDT")
.
- createPmiMinorAngularDimensionBuilder(BaseAngularDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiNote(NoteData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.NoteCollection
-
Creates a PMI note
License requirements: geometric_tol ("GDT")
.
- createPmiNoteBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
CreatePmiNoteBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- CreatePmiNoteBuilder - Interface in nxopen.ame
-
- createPmiNoteBuilder(SimpleDraftingAid) - Method in interface nxopen.annotations.AnnotationManager
-
- createPmiNumberBuilder(PmiNumber) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiOrdinateDimensionBuilder(OrdinateDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiOrdinateOriginDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI ordinate origin dimension
License requirements: geometric_tol ("GDT")
.
- createPmiParallelDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI parallel dimension
License requirements: geometric_tol ("GDT")
.
- createPmiPerpendicularDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI perpendicular dimension
License requirements: geometric_tol ("GDT")
.
- createPmiRadialDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiRadiusDimension(DimensionData, RadiusDimensionType, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI radius dimension
License requirements: geometric_tol ("GDT")
.
- createPmiRapidDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiStringBuilder(PmiString) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiTableBuilder(PmiTableSection) - Method in interface nxopen.annotations.PmiTableSectionCollection
-
If null create a new PMI table section, otherwise edit existing PMI table section
License requirements: geometric_tol ("GDT")
.
- createPmiThicknessDimensionBuilder(PmiConcentricCircleDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createPmiTrackingPropertiesBuilder() - Method in interface nxopen.annotations.AnnotationManager
-
- createPmiUrlNoteBuilder(PmiUrlNote) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiUserDefinedBuilder(PmiUserDefined) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createPmiVerticalBaselineDimension(DimensionData, PmiData[], Xform, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
-
Creates a PMI vertical baseline dimension.
- createPmiVerticalChainDimension(DimensionData, PmiData[], Xform, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
-
Creates a PMI vertical chain dimension.
- createPmiVerticalDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI vertical dimension
License requirements: geometric_tol ("GDT")
.
- createPmiVerticalOrdinateAutoDimension(DimensionData, PmiData, Xform, Point3d, boolean, boolean) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI vertical ordinate automatic dimension
License requirements: geometric_tol ("GDT")
.
- createPmiVerticalOrdinateDimension(DimensionData, PmiData, Xform, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a PMI vertical ordinate dimension
License requirements: geometric_tol ("GDT")
.
- createPmiWaveLinkBuilder(Annotation) - Method in interface nxopen.annotations.PmiWaveCollection
-
Creates a
PmiWaveLinkBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.0.0
- createPneumaticCylinderBuilder(PneumaticCylinder) - Method in interface nxopen.mechatronics.PneumaticCylinderCollection
-
- createPneumaticValveBuilder(PneumaticValve) - Method in interface nxopen.mechatronics.PneumaticValveCollection
-
- createPocket(NXObject) - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Creates pocket.
- createPocketBuilder() - Method in interface nxopen.tooling.PocketCollection
-
Creates pocket object
License requirements: None.
- createPoint(Point3d) - Method in interface nxopen.PointCollection
-
Creates a
Point
without parameters.
- createPoint(Offset, Point, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(IParameterizedSurface, Scalar, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(View, IBaseCurve, IBaseCurve, Point3d, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
on the intersection of two
Curve
and/or
Edge
in a View.
- createPoint(IBaseCurve, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(IBaseCurve, Scalar, PointCollection.PointOnCurveLocationOption, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
on a
Curve
or
Edge
and
Scalar
representing
the Percent parameter or Arc Length or Percent Arc Length.
- createPoint(IBaseCurve, Scalar, SmartObject.UpdateOption, boolean) - Method in interface nxopen.PointCollection
-
- createPoint(IBaseCurve, Point, Scalar, PointCollection.AlongCurveOption, Sense, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(Scalar, Scalar, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(Point, Xform, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(IBaseCurve, Scalar, Xform, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(IBaseCurve, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(IBaseCurve, IBaseCurve, Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
at the intersection of two Edges or Curves.
- createPoint(IBaseCurve, IBaseCurve, Point3d, View, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
at the apparent intersection of two Edges or Curves in a view.
- createPoint(IParameterizedSurface, IBaseCurve, Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(IBasePlane, IBaseCurve, Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(IParameterizedSurface, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
at the center of a spherical face.
- createPoint(IRoutePosition, Xform, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(CartesianCoordinateSystem, Scalar, Scalar, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(Point, Point, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
between two points using a
Scalar
that represents
a percentage of the distance between the points.
- createPoint(Expression, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
- createPoint(CAEFace, Point, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a point by projecting onto a face.
- createPoint(ScCollector, IBaseCurve, Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
at the intersection of a
connected set of faces and
IBaseCurve
.
- createPoint(SmartObject.UpdateOption, Annotation, Scalar, int, int, boolean) - Method in interface nxopen.PointCollection
-
- createPoint(IBaseCurve, View) - Method in interface nxopen.PointCollection
-
Creates a
Point
at the center of a splarc.
- createPoint(IBaseCurve, Scalar, PointCollection.PointOnCurveLocationOption, Point, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
on a
Curve
or
Edge
and
Scalar
representing
the Location option and Location Reference
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR nx_masterfem ("Finite Element Modeling") OR geometric_tol ("GDT") OR cam_base ("CAM BASE")
Created in NX11.0.0
- createPoint(double[]) - Method in interface nxopen.uf.UFCurve
-
- createPoint(double[]) - Method in interface nxopen.uf.UFPatt
-
- createPoint() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the option to control if a reference point should be output with this feature.
- createPoint3Scalars(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createPoint3ScalarsCsys(Tag, Tag, Tag[], UFSo.UpdateOption) - Method in interface nxopen.uf.UFSo
-
- createPointAlongCurve(Tag, UFSo.UpdateOption, Tag, Tag, Tag, UFSo.PointAlongCurveOption, boolean) - Method in interface nxopen.uf.UFSo
-
- createPointByCoordinates() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Creates a standard point.
- createPointCloudBuilder(PointCloud) - Method in interface nxopen.display.PointCloudCollection
-
- createPointConicCenter(Tag, UFSo.UpdateOption, Tag) - Method in interface nxopen.uf.UFSo
-
- createPointDirrDaxis(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createPointDirrDplane(Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createPointExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createPointExtractWithDispMarker(Tag, UFSo.UpdateOption, Tag, Tag, UFDisp.PolyMarker) - Method in interface nxopen.uf.UFSo
-
- createPointFeatureBuilder(Feature) - Method in interface nxopen.features.BaseFeatureCollection
-
- createPointInSketch() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Creates point pattern in sketch
License requirements: None.
- createPointMarkBuilder(PointMark) - Method in interface nxopen.weld.WeldManager
-
- createPointOffset(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createPointOnArcAngle(Tag, UFSo.UpdateOption, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createPointOnAxis(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createPointOnCurve(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createPointOnCurveBuilder(PointOnCurve) - Method in interface nxopen.motion.PointOnCurveCollection
-
Creates a
PointOnCurveBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createPointOnCurveConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry, Sketch.ConstraintGeometryHelp) - Method in interface nxopen.Sketch
-
Creates a point on curve constraint.
- createPointOnCurveJointBuilder(PointOnCurveJoint) - Method in interface nxopen.mechatronics.PointOnCurveJointCollection
-
- createPointOnPortExtractAlign(SmartObject.UpdateOption, Port, Scalar) - Method in interface nxopen.PointCollection
-
- createPointOnSectionCG(SmartObject.UpdateOption, TaggedObject) - Method in interface nxopen.PointCollection
-
Creates a
Point
on the center of gravity of the sketch for a given sheet metal feature face
in history free mode.
- createPointOnStringConstraint(Sketch.ConstraintGeometry, Curve[], Sketch.ConstraintGeometryHelp, int) - Method in interface nxopen.Sketch
-
Creates a point on string constraint.
- createPointOnStringConstraint(Sketch.ConstraintGeometry, Curve, Sketch.ConstraintGeometryHelp) - Method in interface nxopen.Sketch
-
Creates a point on string constraint.
- createPointOnSurface(Tag, UFSo.UpdateOption, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createPointOnSurfaceAxis(TaggedObject, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a parameterised point on the center line axis of the given face.
- createPointOnSurfaceBuilder(PointOnSurface) - Method in interface nxopen.motion.PointOnSurfaceCollection
-
- createPointOnSurfaceConstraint(UFMotion.PointOnSurfaceData) - Method in interface nxopen.uf.UFMotion
-
- createPointPairBuilder() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
- createPointPairBuilder() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
- createPointRecipe(String, Point, double) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Creates a Point based Single Node Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createPoints() - Method in interface nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder
-
- createPoints() - Method in interface nxopen.geometricanalysis.CurveAnalysisPeaksBuilder
-
- createpoints - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingsData
-
Add points to the new segments to maintain shape after subdivision.
- createpoints - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingValuesData
-
Add points to the new segments to maintain shape after subdivision.
- createPointsAtRcps(ControlPoint, ControlPoint) - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Create builder end points at the RCP locations
License requirements: routing_harness ("Routing Harness")
.
- createPointSetAlignmentBuilder() - Method in interface nxopen.Part
-
Creates point set alignment builder object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- createPointSetBuilder(PointSet) - Method in interface nxopen.features.FeatureCollection
-
Creates a
PointSetBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createPointsFeature(int, Tag[]) - Method in interface nxopen.uf.UFModeling
-
- createPointsFromFileBuilder() - Method in interface nxopen.Part
-
- createPointSplarc(IBaseCurve, View) - Method in interface nxopen.PointCollection
-
Creates a
Point
draft smart point for splines as arcs
License requirements: drafting ("DRAFTING")
.
- createPointSplineDefiningPoint(IBaseCurve, int, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
at a spline defining point.
- createPointSplinePole(IBaseCurve, int, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
at a spline pole.
- createPointSurfaceCrv(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createPointTarget(DatumTargetData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a PMI point target
License requirements: geometric_tol ("GDT")
.
- createPointTarget(DatumTargetData, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a drafting point target
License requirements: drafting ("DRAFTING")
.
- createPointToPointBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a point to point operation builder
License requirements: cam_base ("CAM BASE")
.
- createPointTwoCurves(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createPointWithBaseDataSGRPExpression() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Create a point according to Base Data SGRP expressions
License requirements: None.
- createPointWithBaseDataSGRPExpression() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Create a point according to Base Data SGRP expressions
License requirements: None.
- createPointWithBaseDataSGRPExpression() - Method in interface nxopen.features.vehicledesign.SeatBeltAnchorageBuilder
-
Create a point according to Base Data SGRP expressions
License requirements: None.
- createPolesGroup() - Method in interface nxopen.geometricutilities.ControlPoleManagerData
-
Creates a new poles group
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- createPoleSmoothingBuilder(PoleSmoothing) - Method in interface nxopen.features.FeatureCollection
-
Creates a
PoleSmoothingBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createPolygonBody(Body) - Method in interface nxopen.cae.FemPart
-
CREATE POLYGON BODY on excluded ug tag
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createPolygonFaceOnMeshBuilder() - Method in interface nxopen.cae.AbstractionManager
-
Creates a builder for Polygon Face On Mesh Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createPolygonModelingBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
Creates a
PolygonModelingBuilder
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
Created in NX12.0.0
- createPolyline(Point2d[]) - Method in interface nxopen.markup.MarkupFileObjectCollection
-
Creates a
Polyline
License requirements: None.
- createPolylineBuilder(Polyline) - Method in interface nxopen.features.FreeformCurveCollection
-
Creates a polyline builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE")
.
- createPopulateTitleBlockBuilder(TitleBlock[]) - Method in interface nxopen.diagramming.TitleBlockCollection
-
- createPort() - Method in interface nxopen.diagramminglibraryauthor.PortDataBuilder
-
Creates a new port
License requirements: None.
- createPortAtSegend(Tag, int, boolean) - Method in interface nxopen.uf.UFRoute
-
- createPortBuilder(Part, NXObject, NXObject) - Method in interface nxopen.ame.AMEManager
-
Creates a port builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createPortBuilder(Port) - Method in interface nxopen.diagramming.PortCollection
-
- createPortConnection(Port, Port) - Method in interface nxopen.routing.PortConnectionCollection
-
- createPortConnectionBuilder(Part, NXObject) - Method in interface nxopen.ame.AMEManager
-
Creates a port builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createPortEquipmentBuilder(Part, PortEquipment) - Method in interface nxopen.pid.PidManager
-
- createPortEvaluatorBuilder(Part, ExpressionEvaluator) - Method in interface nxopen.ame.AMEManager
-
Creates a
PortEvaluatorBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createPortLock(Tag, boolean) - Method in interface nxopen.uf.UFRoute
-
- createPortsManagerBuilder(Part, NXObject) - Method in interface nxopen.ame.AMEManager
-
Creates a ports manager builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createPositionControlBuilder(PositionControl) - Method in interface nxopen.mechatronics.PositionControlCollection
-
- createPositionerBuilder(SubmechanismPositioner) - Method in interface nxopen.motion.SubmechanismPositionerCollection
-
- createPositioningBuilder() - Method in interface nxopen.tooling.ReusableObjectManager
-
- createPositioningBuilder(Feature) - Method in interface nxopen.tooling.ReusableObjectManager
-
- createPositioningDimension() - Method in interface nxopen.features.RPOBuilder
-
Creates a positioning dimension.
- createPositioningFeatureOnPoint(NXObject, Point3d, boolean) - Method in interface nxopen.tooling.AddReusablePart
-
Create positioning feature on the given position
License requirements: None.
- createPositioningFeatureOnPoint(NXObject, Point3d, boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Create positioning feature on the given position
License requirements: None.
- createPositioningGroupBuilder(Part, PositioningGroup) - Method in interface nxopen.CollaborativeContentManager
-
Creates a
PositioningGroupBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX10.0.0
- createPositioningTaskBuilder(PositioningTask) - Method in interface nxopen.assemblies.SubsetCollection
-
Creates a
PositioningTaskBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX10.0.0
- createPositionSensorBuilder(PositionSensor) - Method in interface nxopen.mechatronics.PositionSensorCollection
-
- createPostConfiguratorBuilder(String) - Method in interface nxopen.sim.postconfigurator.PostConfiguratorManager
-
Creates a
PostConfiguratorBuilder
object
License requirements: nx_post_config_full ("NX Post Configurator") OR nx_post_config_adv ("NX Post Configurator")
Created in NX10.0.3
- createPostJtBuilder() - Method in interface nxopen.cae.ResultManager
-
Creates a builder for exporting a component or result type JT
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- createPostScenarioBuilderFromParameters(PostScenarioParameters) - Method in interface nxopen.cae.PostScenarioManager
-
Creates a transient object
PostScenarioBuilder
that is
responsible for creating a post scenario object.
- createPostScenarioBuilderFromScenario(PostScenario) - Method in interface nxopen.cae.PostScenarioManager
-
Creates a builder for the Scenario retrieved from a Visualized Scenario.
- createPostScenarioBuilderFromViewport(int) - Method in interface nxopen.cae.PostScenarioManager
-
Creates a builder for the Scenario retrieved from a Visualized Scenario from a certain viewport.
- createPostSelectionEntity() - Method in interface nxopen.cae.ResultManager
-
Creates a selection entity object.
- createPostShowhideBuilder(int) - Method in interface nxopen.cae.Post
-
Creates
PostShowhideBuilder
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX11.0.2
- createPostview(int, int, boolean) - Method in interface nxopen.cae.Post
-
- createPostview(int, Result, boolean) - Method in interface nxopen.cae.Post
-
Create a new post view with default settings on a loaded result id.
- createPostview(int, ResultParametersWithProbe, boolean) - Method in interface nxopen.cae.Post
-
Create a new post view for a given probe.
- createPostview(int, ResultParametersWithNodalForceReport) - Method in interface nxopen.cae.Post
-
Create a new post view for a given free body.
- createPostviewForResult(int, int, boolean, Result.ResultParameters) - Method in interface nxopen.cae.Post
-
- createPostviewForResult(int, Result, boolean, ResultParameters) - Method in interface nxopen.cae.Post
-
Create a new post view with specified result on a loaded result id.
- createPostviewsForResultAndSE(int, Result, ResultParameters) - Method in interface nxopen.cae.Post
-
Create a new post view with specified result on a loaded result id.
- createPower(UFVariant, double, String) - Method in interface nxopen.uf.UFPath
-
- createPprint(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createPrebendBuilder(Prebend) - Method in interface nxopen.features.ToolingCollection
-
Creates a
PrebendBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX10.0.0
- createPreferenceBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createPreferenceBuilder(PhysicsPreference) - Method in interface nxopen.mechatronics.PhysicsPreferenceCollection
-
- createPreferenceBuilder() - Method in interface nxopen.weld.WeldManager
-
- createPreferencesBuilder() - Method in interface nxopen.drafting.AutomationManager
-
- createPreferencesBuilder() - Method in interface nxopen.drafting.SettingsManager
-
Creates a
PreferencesBuilder
License requirements: drafting ("DRAFTING")
Created in NX9.0.0
- createPreferencesBuilder(Part, Sheet) - Method in interface nxopen.pid.PidManager
-
- createPrefun(UFVariant, int, String) - Method in interface nxopen.uf.UFPath
-
- createPreprocessGeometryBuilder() - Method in interface nxopen.cam.CAMSetup
-
Creates a preprocess geometry builder
License requirements: cam_base ("CAM BASE")
.
- createPretestBuilder(PreTestSolution) - Method in interface nxopen.cae.PreTestSolutionCollection
-
Creates a pre-test dialog builder
License requirements: nx_correl_base ("FE Correlation")
.
- createPretestDofsetBuilder(PreTestDofSet) - Method in interface nxopen.cae.PreTestSolutionCollection
-
Creates a dof set dialog builder
License requirements: nx_correl_base ("FE Correlation")
.
- createPreventCollisionBuilder(PreventCollision) - Method in interface nxopen.mechatronics.PreventCollisionCollection
-
- createPreview() - Method in interface nxopen.features.ChamferBuilder
-
Creates the chamfer preview body
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createPreview(View, boolean) - Method in interface nxopen.ViewUIManager
-
Creates a Model View Preview
License requirements: None.
- createPreviewPath() - Method in interface nxopen.weld.WeldBeadBuilder
-
Creates a preview curve that will be used to create the bead solid.
- createPreviewPropertiesBuilder(NXObject[]) - Method in interface nxopen.PropertiesManager
-
Create the PreviewPropertiesBuilder
License requirements: None.
- createPreviewSurface() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Create preview surface data from builder.
- createPrimaryContentItemBuilder() - Method in interface nxopen.drafting.AutomationManager
-
- createPrimitiveMeshBuilder(Mesh) - Method in interface nxopen.cae.MeshManager
-
Creates a builder for editing an existng primitive mesh.
- createPrimitiveMeshBuilder(String) - Method in interface nxopen.cae.MeshManager
-
Creates a builder for creating a primitive mesh of the specified type.
- createPrimitiveRecipeMeshBuilder(PrimitiveRecipeMesh) - Method in interface nxopen.cae.MeshManager
-
Creates a builder for editing an existing primitive recipe mesh.
- createPrimitiveRecipeMeshBuilder(PrimitiveRecipeMeshBuilder.Type) - Method in interface nxopen.cae.MeshManager
-
Creates a builder for creating a new primitive recipe mesh of the specified type.
- createPrint3dBuilder() - Method in interface nxopen.PlotManager
-
Create the Print3dBuilder
License requirements: None.
- createPrintBuilder() - Method in interface nxopen.PlotManager
-
Create the PrintBuilder
License requirements: None.
- createPrintPdfbuilder() - Method in interface nxopen.PlotManager
-
Create the PrintPDFBuilder
License requirements: None.
- createProbeCalibrateLengthMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Probe Calibrate Length Move.
- createProbeCalibrateSphereMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Probe Calibrate on Sphere Move.
- createProbeCalibrateStylusMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Probe Calibrate Stylus Move.
- createProbeClearanceMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Probe Clearance Plane Change.
- createProbeInspectBorebossMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Probe Inspect Bore-Boss Move.
- createProbeInspectPointMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Probe Inspect Point Move.
- createProbeInspectSurfacePointMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Probe Inspect Surface Point Move.
- createProbeToolBuilder(CAMObject) - Method in interface nxopen.cam.InspectionGroupCollection
-
Creates a probe tool builder for Inspection
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createProbeToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a probe tool builder
License requirements: cam_base ("CAM BASE")
.
- createProbeTrackingBuilder(ProbeTrackPoint) - Method in interface nxopen.cam.InspectionTool
-
Creates a Probe Trackpoint builder
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createProbeTrackingBuilder(ProbeTrackPoint) - Method in interface nxopen.cam.Tool
-
Creates a Probe Trackpoint builder
License requirements: cam_base ("CAM BASE")
.
- createProcessSpecificationBuilder(ProcessSpecification) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createProductBoundingBox() - Method in interface nxopen.geometricutilities.LocalUntrimBuilder
-
Creates the product initial bounding box.
- createProductBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
CreateProductBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- CreateProductBuilder - Interface in nxopen.ame
-
- createProductDefinition(UFPd.ProductDefinition) - Method in interface nxopen.uf.UFPd
-
- createProductMatchingRulesBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createProductOutlineBuilder() - Method in interface nxopen.assemblies.ProductOutlineManager
-
- createProductSelectionBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
ProductSelectionBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createProductSelectionDetailsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createProeImporter() - Method in interface nxopen.DexManager
-
Create the ProE Importer
License requirements: None.
- createProfileBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
ProfileBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
- createProfileCutoutBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
ProfileCutoutBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createProfileExternalTable(String, String, int, int, int, int, Expression, Expression, Expression, Expression, Expression, Expression, boolean, boolean, FieldEvaluator.InterpolationEnum, FieldEvaluator.ValuesOutsideTableInterpolationEnum, FieldEvaluator.ValuesOutsideTableInterpolationEnum, Expression, Expression) - Method in interface nxopen.fields.FieldManager
-
Creates an External Data Table Profile
License requirements: None.
- createProfileField(String, Unit, Sketch, int, int, Expression, Expression, Expression, int) - Method in interface nxopen.fields.FieldManager
-
- createProfileListBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
ProfileListBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX5.0.0
- createProfileSplitBuilder() - Method in interface nxopen.tooling.ProfileSplitCollection
-
Creates profile split builder
License requirements: None.
- createProfileSystemBuilder(ProfileSystem) - Method in interface nxopen.features.ShipCollection
-
- createProfileTransitionBuilder(ProfileTransition) - Method in interface nxopen.features.ShipCollection
-
- createProgram(InspectionGroup, String, String, NCGroupCollection.UseDefaultName, String) - Method in interface nxopen.cam.InspectionGroupCollection
-
Create a program group of the specified type and subtype under the parent group.
- createProgram(NCGroup, String, String, NCGroupCollection.UseDefaultName, String) - Method in interface nxopen.cam.NCGroupCollection
-
Create a program group of the specified type and subtype under the parent group.
- createProgramOrderGroupBuilder(CAMObject) - Method in interface nxopen.cam.InspectionGroupCollection
-
Creates a program order group builder for Inspection
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- createProgramOrderGroupBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a program order group builder
License requirements: cam_base ("CAM BASE")
.
- createProgress(int, String) - Method in interface nxopen.shipdesign.Generator
-
Creates a progress bar with given title and number of total steps.
- createProjCurves(int, Tag[], int, Tag[], int, UFCurve.Proj) - Method in interface nxopen.uf.UFCurve
-
- createProjCurves(Tag[], Tag[], int, double[]) - Method in interface nxopen.uf.UFModlGeneral
-
- createProjCurves1(int, Tag[], int, Tag[], int, UFCurve.Proj1) - Method in interface nxopen.uf.UFCurve
-
- createProject(CloneObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Creates the assembly structure of Electrode Wizard project.
- createProjectBuilder(Feature) - Method in interface nxopen.SketchCollection
-
Creates a
SketchProjectBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
- createProjectBuilder() - Method in interface nxopen.tooling.ElectrodeDesignCollection
-
Creates electrode initialization builder
License requirements: nx_electrode_wizard ("NX Electrode Wizard")
.
- createProjectCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ProjectCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX5.0.0
- createProjectedView(DraftingView, Point3d) - Method in interface nxopen.drawings.SheetDraftingViewCollection
-
Lets you add a projected view (Orthoraphic View) for the selected parent view.
- createProjectedView(DraftingView, Point3d, Direction) - Method in interface nxopen.drawings.SheetDraftingViewCollection
-
Lets you add a projected view (A View) for the selected parent view.
- createProjectedView(DraftingView, Point3d, boolean) - Method in interface nxopen.drawings.SheetDraftingViewCollection
-
Lets you add a projected view (A View) for the selected parent view.
- createProjectedViewBuilder(ProjectedView) - Method in interface nxopen.drawings.DraftingViewCollection
-
Creates the Projected View Builder
License requirements: drafting ("DRAFTING")
.
- createProjectEngineeringObjectBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createProjectInitializationBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
ProjectInitializationBuilder
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX12.0.0
- createProjectNodesToCadGeometryBuilder() - Method in interface nxopen.cae.MeshManager
-
Creates a project nodes to cad geometry builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createProjectSetupBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
ProjectSetupBuilder
License requirements: nx_ship_gen_arrange ("Ship General Arrangement") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX12.0.0
- createPromotion(Tag) - Method in interface nxopen.uf.UFModlGeneral
-
- createPromotionBuilder(Promotion) - Method in interface nxopen.features.FeatureCollection
-
Creates a
PromotionBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createProperty(Property.TypeOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createPropertyBuilder() - Method in interface nxopen.assemblies.productinterface.Collection
-
Create Product Interface Property Builder
License requirements: None.
- createPropertyEvaluatorBuilder(Part, ExpressionEvaluator) - Method in interface nxopen.ame.AMEManager
-
Creates a
PropertyEvaluatorBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createPropertyTable() - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
Creates a PropertyTable
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createProximitySearchTerm(SearchTerm.SearchTermLogicType, SearchResultElement[], double, boolean) - Method in interface nxopen.assemblies.SubsetRecipe
-
Creates a
ProximitySearchTerm
and
adds it to the recipe at the end of the list of search terms.
- createProximitySearchTermBuilder(ProximitySearchTerm) - Method in interface nxopen.assemblies.SubsetCollection
-
- createProxyObjectBuilder(ProxyObject) - Method in interface nxopen.mechatronics.ProxyObjectCollection
-
- createProxyObjectParameterBuilder() - Method in interface nxopen.mechatronics.ProxyObjectCollection
-
- createProxyObjectParameterBuilder() - Method in interface nxopen.mechatronics.ProxyOverrideObjectCollection
-
- createProxyPort(Point3d, Vector3d, Vector3d, DisplayableObject, double) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with a rotation vector at an absolute location.
- createProxyPort(Point3d, Vector3d) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with no rotation vector at an absolute location.
- createProxyPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Point) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with a rotation vector at a point.
- createProxyPort(Point3d, Vector3d, Point) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with no rotation vector at a point.
- createProxyPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Axis) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with a rotation vector on an axis.
- createProxyPort(Point3d, Vector3d, Axis) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with no rotation vector on an axis.
- createProxyPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, boolean) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with a rotation vector at an absolute location
License requirements: routing_base ("Routing Basic")
.
- createProxyPort(Point3d, Vector3d, boolean) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with no rotation vector at an absolute location
License requirements: routing_base ("Routing Basic")
.
- createProxyPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Point, boolean) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with a rotation vector at a point
License requirements: routing_base ("Routing Basic")
.
- createProxyPort(Point3d, Vector3d, Point, boolean) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with no rotation vector at a point
License requirements: routing_base ("Routing Basic")
.
- createProxyPort(Point3d, Vector3d, Vector3d, DisplayableObject, double, Axis, boolean) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with a rotation vector on an axis
License requirements: routing_base ("Routing Basic")
.
- createProxyPort(Point3d, Vector3d, Axis, boolean) - Method in interface nxopen.routing.ProxyPortCollection
-
Creates a ProxyPort with no rotation vector on an axis
License requirements: routing_base ("Routing Basic")
.
- createPsTrimmedCurve(Tag) - Method in interface nxopen.uf.UFPs
-
- createPtCrvConstraint(UFMotion.PointCurveConstraint) - Method in interface nxopen.uf.UFMotion
-
- createPublishComponentBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
PublishComponentBuilder
that can export local definitions into external storage locations
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
- createPullFaceBuilder(PullFace) - Method in interface nxopen.features.FeatureCollection
-
Creates a
PullFaceBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createPunchInsertBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates a
PunchInsertBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX11.0.0
- createPyramids - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- createQuadrantPoint(IBaseCurve, int, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a quadrant point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR nx_masterfem ("Finite Element Modeling") OR geometric_tol ("GDT") OR cam_base ("CAM BASE")
.
- createQualifySketchBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
QualifySketchBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createQueryBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
QueryBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createQueryCurveBuilder() - Method in interface nxopen.cae.QueryCurveManager
-
Creates a builder for query curve create command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createQueryCurveBuilder(QueryCurve) - Method in interface nxopen.cae.QueryCurveManager
-
Creates builder for creating or editing query curves
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createQueryCurvePost(Result, String, QueryCurvePost.Entity[], int) - Method in interface nxopen.cae.ResultManager
-
Creates query curve from an ordered set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- createQueryFolder(AMEBaseNode) - Method in interface nxopen.ame.AMEManager
-
Creates a
QueryFolder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createQueryPmiBuilder() - Method in interface nxopen.annotations.AnnotationManager
-
Creates the Query PMI builder
License requirements: geometric_tol ("GDT")
.
- createQueryResultsView() - Method in interface nxopen.annotations.QueryPmiBuilder
-
Returns the create query results view.
- createQueryView(Annotation[]) - Method in interface nxopen.annotations.AnnotationManager
-
Creates a model view displaying the given PMI symbols.
- createQuickBinderBuilder(QuickBinder) - Method in interface nxopen.die.DieCollection
-
Creates a
QuickBinderBuilder
License requirements: die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX7.5.0
- createQuickBinderWrapBuilder(Feature) - Method in interface nxopen.die.DieCollection
-
- createQuickDatumCsysBuilder() - Method in interface nxopen.tooling.ReusableObjectManager
-
- createQuickExtendBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchQuickExtendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
- createQuickPathBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a Quick Path builder.
- createQuickQuotationBuilder() - Method in interface nxopen.tooling.QuickQuotationCollection
-
- createQuickTrimBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchQuickTrimBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
- createRackPinionBuilder(RackPinion) - Method in interface nxopen.mechatronics.RackPinionCollection
-
- createRadialDimension(Sketch.DimensionGeometry, Point3d, Expression) - Method in interface nxopen.Sketch
-
Creates a radial dimension constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createRadialDimension(Sketch.DimensionGeometry, Point3d, Expression, Sketch.DimensionOption) - Method in interface nxopen.Sketch
-
Creates a radial dimension constraint.
- createRadialDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createRadialDimensionBuilder(RadialDimension) - Method in interface nxopen.features.FeatureCollection
-
Creates a
RadialDimensionBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createRadialDimensionBuilder(Dimension) - Method in interface nxopen.SketchCollection
-
- createRadialGrooveMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a Radial Groove Milling operation builder
License requirements: cam_base ("CAM BASE")
.
- createRadiusAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollectionEx
-
Creates a radius analysis builder.
- createRadiusDim(UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createRadiusDimension(DimensionData, RadiusDimensionType, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a radius dimension
License requirements: drafting ("DRAFTING")
.
- createRadiusDimension(boolean) - Method in interface nxopen.SketchPolygonBuilder
-
The flag to indicate if we need to create radius dimension
License requirements: None.
- createRandomEventBuilder(DurabilityRandomEvent) - Method in interface nxopen.cae.DurabilityEventCollection
-
Creates the builder object of the durability random event.
- createRandomEventBuilder(LaminateRandomEvent) - Method in interface nxopen.cae.LaminateDynamicEventCollection
-
Creates a builder for the laminate random event.
- createRandomfatigueBuilder(DurabilityRandomFatigue) - Method in interface nxopen.cae.DurabilityRandomFatigueCollection
-
Creates the builder object of durability event fatigue settings.
- createRapidDimensionBuilder(Dimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createRapidDimensionBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchRapidDimensionBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
- createRapidSurfaceBuilder(RapidSurface) - Method in interface nxopen.features.FeatureCollection
-
Creates a Rapid Surfacing feature builder
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- createRasterImage(Point3d, Matrix3x3, double, double, String, double, RasterImage.MaxTextureSize) - Method in interface nxopen.features.FeatureCollection
-
Creates a raster image
License requirements: studio_visualize ("STUDIO VISUALIZE")
.
- createRasterImageBuilder(RasterImage) - Method in interface nxopen.display.ImageCollection
-
- createRayTracedStudioBuilder() - Method in interface nxopen.ViewCollection
-
- createRayTracedStudioEditorBuilder() - Method in interface nxopen.ViewCollection
-
- createRcpArcCenter(Tag) - Method in interface nxopen.uf.UFRoute
-
- createRcpAtPort(Tag, boolean) - Method in interface nxopen.uf.UFRoute
-
- CreateRcpAtPortData() - Constructor for class nxopen.uf.UFRoute.CreateRcpAtPortData
-
- createRcpByWcsOff(Tag, double[], boolean) - Method in interface nxopen.uf.UFRoute
-
- CreateRcpByWcsOffData() - Constructor for class nxopen.uf.UFRoute.CreateRcpByWcsOffData
-
- createRcpByWorkPos(double[], boolean) - Method in interface nxopen.uf.UFRoute
-
- CreateRcpByWorkPosData() - Constructor for class nxopen.uf.UFRoute.CreateRcpByWorkPosData
-
- createRcpCurveParm(Tag, double) - Method in interface nxopen.uf.UFRoute
-
- createRcpOnRcp(Tag, boolean) - Method in interface nxopen.uf.UFRoute
-
- CreateRcpOnRcpData() - Constructor for class nxopen.uf.UFRoute.CreateRcpOnRcpData
-
- createRcpPoint(Tag) - Method in interface nxopen.uf.UFRoute
-
- createRcpPosition(double[]) - Method in interface nxopen.uf.UFRoute
-
- createReachZone() - Method in interface nxopen.features.Human
-
Create a new
HumanReachZone
for human feature
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
Created in NX4.0.0
- CreateReachZoneData() - Constructor for class nxopen.features.Human.CreateReachZoneData
-
- createReadWriteDeviceBuilder(ReadWriteDeviceObject) - Method in interface nxopen.mechatronics.ReadWriteDeviceCollection
-
- createRealCondition(Property, double, Condition.OperatorOption, double) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createRealMatrixRecord(String, String) - Method in interface nxopen.cae.ftk.DataManager
-
Creates an empty real matrix record which section data is real data.
- createReassignElementsBuilder() - Method in interface nxopen.cae.MeshManager
-
Creates a builder for element transfer to collector command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRebaseBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
RebaseBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createRebendFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Rebend feature builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createReblendFace(UFModl.ReblendFaceData) - Method in interface nxopen.uf.UFModlFeatures
-
- createRecord(XyFunctionMacroType, XyFunctionGeneralType, AfuData) - Method in interface nxopen.cae.AfuManager
-
Create a new AFU Data Record.
- createRecord(AfuData) - Method in interface nxopen.cae.AfuManager
-
Create a new AFU Data Record.
- createRectangle(Point2d, double, double) - Method in interface nxopen.markup.MarkupFileObjectCollection
-
Creates a
Rectangle
License requirements: None.
- createRectangularOffsetPath(ISegment[], boolean, Stock[], boolean, boolean, OffsetPathCollection.BendType, boolean, double, double, boolean, boolean, Vector3d, Vector3d, Point3d, double, double, double, int, int, int, int) - Method in interface nxopen.routing.OffsetPathCollection
-
Creates a rectangular offset path.
- CreateRectangularOffsetPathData() - Constructor for class nxopen.routing.OffsetPathCollection.CreateRectangularOffsetPathData
-
- createRectangularPatternFace(UFModl.DfoRegion, Tag, Tag, int, int, String, String) - Method in interface nxopen.uf.UFModlFeatures
-
- createRectangularTarget(RectangularTargetData, PmiData, Xform, Point3d, LeaderBundle) - Method in interface nxopen.annotations.DatumTargetCollection
-
Creates a PMI rectangular target
License requirements: geometric_tol ("GDT")
.
- createRectGroove(double[], double[], String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createRectPad(double[], double[], double[], String[], String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createRectPocket(double[], double[], double[], String[], String, String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createRectSlot(double[], double[], double[], String, String, String, Tag, Tag, Tag) - Method in interface nxopen.uf.UFModl
-
- createReduceSurfaceRadiusBuilder() - Method in interface nxopen.geometricutilities.CAMDataPrepManager
-
- createReduceSurfaceRadiusFaceGroupBuilder() - Method in interface nxopen.geometricutilities.CAMDataPrepManager
-
- createRefCsys(Point3d, Matrix3x3) - Method in interface nxopen.tooling.StockSizeBuilder
-
Creates the reference csys for stock size.
- createReferenceBlend() - Method in interface nxopen.tooling.ReferenceBlendBuilder
-
Create reference blend
License requirements: None.
- createReferenceBlendBuilder() - Method in interface nxopen.tooling.ReferenceBlendCollection
-
- createReferenceData() - Method in interface nxopen.weld.JointmarkBuilder
-
Create a temporary overlap or top sheet and guide curve.
- createReferenceLineBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
ReferenceLineBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX5.0.0
- createReferenceLines() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the reference lines should be created,
true they will be created, false they will not be created.
- createReferenceMapperBuilder(FeatureBuilder) - Method in interface nxopen.features.FeatureCollection
-
- createReferencePattern() - Method in interface nxopen.features.PatternFeatureBuilder
-
Returns the Create Reference Pattern option
License requirements: None.
- createReferenceResult(SimResultReference) - Method in interface nxopen.cae.ResultManager
-
- createReferenceSet() - Method in interface nxopen.BasePart
-
- createRefineDisplayBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
- createRefitFaceBuilder(RefitFace) - Method in interface nxopen.features.FeatureCollection
-
Creates a RefitFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createRefitFaceFeature(UFModl.RefitFaceData) - Method in interface nxopen.uf.UFModlFeatures
-
- createReflection(View, boolean) - Method in interface nxopen.ViewCollection
-
- createReflectionAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollectionEx
-
Creates a reflection analysis builder.
- createReflectionDataBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createReflectionDataBuilder(ReflectionData) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
ReflectionDataBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createReflectionMatrix(Tag) - Method in interface nxopen.uf.UFTrns
-
- CreateReflectionMatrixData() - Constructor for class nxopen.uf.UFTrns.CreateReflectionMatrixData
-
- createReformBuilder(Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
-
Create reform builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- createRefSet(String, double[], double[], Tag[], int) - Method in interface nxopen.uf.UFAssem
-
- createRegionBody() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Create the region body that has the inscribed boundaries.
- createRegionBuilder(Region) - Method in interface nxopen.annotations.PmiRegionCollection
-
- createRegionListItem() - Method in interface nxopen.features.VarOffsetFaceBuilder
-
The region selection type dim object's create function
License requirements: None.
- createRegionPoint(Point, Body) - Method in interface nxopen.Part
-
Creates an item that contains a point and its corresponding body context for a region
License requirements: None.
- createRegions() - Method in interface nxopen.cam.CutRegionsBuilder
-
Create regions method
License requirements: None.
- createRegions() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Creates regions to output the selected plates.
- createRegionsAtFrames() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Will create new regions at each frame.
- createRegionSewnSheet(String) - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Create sewn sheet for the region
License requirements: None.
- createRegionsOption() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the create regions type
License requirements: None.
- createRegionsPreview(Face, Curve[]) - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder
-
Create region preview
License requirements: None.
- createRegionsToggle() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Returns the create regions toggle
License requirements: None.
- createRelabelPliesBuilder() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
- createRelatedCurveMethod(FEElemEdge[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related curve method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedCurveMethod(Mesh[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related curve method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedCurveMethod(FENode[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related curve method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedEdgeMethod(CAEBody[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedEdgeMethod(FEElemEdge[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedEdgeMethod(CAEFace[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedEdgeMethod(Mesh[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedEdgeMethod(FENode[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedEdgeMethod(CAEVertex[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemEdgeMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemEdgeMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemEdgeMethod(Mesh[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemEdgeMethod(CAEEdge) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemEdgeMethod(CAEEdge[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemEdgeMethod(CAEEdge[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemEdgeMethod(Mesh, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemEdgeMethod(CAEEdge, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemFaceMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemFaceMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemFaceMethod(Mesh[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemFaceMethod(CAEFace) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemFaceMethod(CAEFace[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemFaceMethod(CAEFace[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemFaceMethod(Mesh, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemFaceMethod(CAEFace, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(Mesh[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(CAEBody) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(CAEBody[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(CAEBody[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(CAEFace) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(CAEFace[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(CAEFace[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(CAEEdge) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(CAEEdge[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(CAEEdge[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(FENode) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(FENode[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(FENode[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Line[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(Line[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Arc[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(Arc[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Conic[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(Conic[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Spline[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedElemMethod(Spline[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Mesh, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(CAEBody, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(CAEFace, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(CAEEdge, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(FENode, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Line, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Arc, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Conic, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedElemMethod(Spline, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related elem method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedFaceMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedFaceMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedFaceMethod(Mesh[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedFaceMethod(FENode) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedFaceMethod(FENode[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedFaceMethod(FENode[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedFaceMethod(FEElement, int) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedFaceMethod(FEElement[], int[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedFaceMethod(FEElemFace[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedFaceMethod(FEElemFace[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedFaceMethod(Mesh, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedFaceMethod(FENode, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedFaceMethod(FEElemFace, int, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedFaceMethod(CAEBody[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedFaceMethod(CAEEdge[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedFaceMethod(MeshControl[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Mesh) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(Mesh[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(Mesh[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(CAEBody) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(CAEBody[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(CAEBody[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(CAEFace) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(CAEFace[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(CAEFace[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(CAEEdge) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(CAEEdge[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(CAEEdge[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(FEElement) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(FEElement[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(FEElement[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(MeshPoint[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(MeshPoint[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Point[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(Point[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Line[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(Line[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Arc[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(Arc[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Conic[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(Conic[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Spline[]) - Method in interface nxopen.cae.SmartSelectionManager
-
- createRelatedNodeMethod(Spline[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(FEElemEdge[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(FEElemFace[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Mesh, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(CAEBody, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(CAEFace, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(CAEEdge, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(FEElement, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(MeshPoint, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Point, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Line, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Arc, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Conic, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(Spline, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(FEElemEdge, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedNodeMethod(FEElemFace, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related node method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedVertexMethod(CAEBody[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related vertex method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedVertexMethod(CAEEdge[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related vertex method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedVertexMethod(CAEFace[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related vertex method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedVertexMethod(Mesh[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related vertex method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelatedVertexMethod(FENode[], boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a related vertex method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createRelativeDaxis(int, Tag[], int[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createRelativeDplane(int, Tag[], int[], int, double[], String, String) - Method in interface nxopen.uf.UFModlFeatures
-
- CreateRelativeDplaneData() - Constructor for class nxopen.uf.UFModlFeatures.CreateRelativeDplaneData
-
- createRelayBuilder(Relay) - Method in interface nxopen.mechatronics.RelayCollection
-
- createReliefDesignBuilder() - Method in interface nxopen.tooling.ReliefDesignCollection
-
Creates Relief Design builder.
- createRemoveDiscontinuityBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Creates a
RemoveDiscontinuityBuilder
which removes
selected discontinuity corners
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX7.5.0
- createRemoveHolesBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates Remove Holes builder.
- createRemoveObjectsBuilder() - Method in interface nxopen.drawings.DrawingRegionCollection
-
Creates remove objects builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- createRemoveParametersBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createRemoveRibsBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for remove ribs command
License requirements: sc_acou_meshing (" SC Acoustic Meshing")
.
- createRemoveSplitBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
RemoveSplitBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createRemoveUndercutsBuilder() - Method in interface nxopen.facet.FacetModelingCollection
-
Creates a
RemoveUndercutsBuilder
object
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
Created in NX12.0.0
- createRenameAndExportComponentBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates a
RenameAndExportComponentBuilder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX11.0.0
- createRenameLinkedPartModulePartBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createRenderSet(String, UFDraw.RenderPrefs) - Method in interface nxopen.uf.UFDraw
-
- createRenewFeatureBuilder() - Method in interface nxopen.features.FeatureCollection
-
Creates a
RenewFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX11.0.0
- createReorderBlendsBuilder(ReorderBlends) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ReorderBlendsBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX7.5.1
- createReparamSheet(int, int, int, int, Tag[], int, Tag[], double, int, Tag[], double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- CreateReparamSheetData() - Constructor for class nxopen.uf.UFModlFeatures.CreateReparamSheetData
-
- createReparentComponentBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
ReplaceComponentBuilder
that can reparent the selected 2D Component
instance with another 2D Component or sketch
License requirements: nx_layout ("NX Layout")
Created in NX11.0.0
- createReplaceBlendBuilder(ReplaceBlend) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ReplaceBlendBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX7.0.0
- createReplaceComponentBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
- createReplaceComponentBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
ReplaceComponentBuilder
that can replace the selected 2D Component
instance with another 2D Component definition
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
- createReplaceExpressionsBuilder() - Method in interface nxopen.ExpressionCollection
-
Replace expressions.
- createReplaceFace(Tag[], int, Tag[], int, Tag, boolean) - Method in interface nxopen.uf.UFModlFeatures
-
- createReplaceFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a replace face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createReplaceFeatureBuilder() - Method in interface nxopen.features.FeatureCollection
-
Creates a
ReplaceFeatureBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createReplacePhysicsBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createReplaceSolidBuilder() - Method in interface nxopen.tooling.ReplaceSolidCollection
-
Creates a
ReplaceSolidBuilder
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX8.0.0
- createReplaceSymbolBuilder() - Method in interface nxopen.annotations.CustomSymbolCollection
-
- createReport(String, String, boolean) - Method in interface nxopen.report.IReportCollection
-
Creates a
Report
in this report collection.
- createReport() - Method in interface nxopen.uf.UFSf
-
- createReportBuilder() - Method in interface nxopen.drawings.ConvertToPMIBuilderManager
-
Creator for Drawing to PMI Report Builder
License requirements: None.
- createReportsSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
ReportsSettingsBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createReportTemplateBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
ReportTemplateBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createRepresentation(Tag, int) - Method in interface nxopen.uf.UFSmd
-
- createRequirementBuilder(Requirement) - Method in interface nxopen.mechatronics.RequirementCollection
-
Create builder for Requirement class
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- createRequirementBuilder(Requirement) - Method in interface nxopen.validate.RequirementCollection
-
- createRequirementCheck() - Method in interface nxopen.validate.RequirementCheckCollection
-
Create a requirement check
License requirements: None.
- createResizeBendAngleBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates Resize Bend Angle Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createResizeBendRadiusFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a Resize Bend Radius Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createResizeBlendBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a resize blend builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createResizeChamferBuilder(ResizeChamfer) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ResizeChamferBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX7.0.0
- createResizeChamferCurveBuilder(ResizeChamferCurve) - Method in interface nxopen.features.SynchronousCurveCollection
-
Creates a
ResizeChamferCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX10.0.0
- createResizeCurveBuilder(ResizeCurve) - Method in interface nxopen.features.SynchronousCurveCollection
-
Creates a
ResizeCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX9.0.0
- createResizeFace(Tag[], int, Tag[], int, String) - Method in interface nxopen.uf.UFModlFeatures
-
- createResizeFaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a resize face builder, don't use it until nx502
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createResizeNeutralFactorBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates Resize Neutral Factor Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createResizePlaneBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Resize Datum Plane feature builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createResponseConstraintBuilder(TBSConstraint) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
Creates the builder of
TBSConstraint
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
- createResponseEventResult(RSEvent) - Method in interface nxopen.cae.ResultManager
-
- createResponseResultsEvaluationSettingBuilder(ResponseResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates response results evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createResponseSolutionResult(Solution) - Method in interface nxopen.cae.ResultManager
-
- createResult() - Method in interface nxopen.cae.SimBcPlotContoursBuilder
-
- createResultAccess(Result, ResultParameters) - Method in interface nxopen.cae.ResultManager
-
Creates a result access object
It is user's responsibility to destroy the result access object once done
using
ResultManager.deleteResultAccess(nxopen.cae.ResultAccess)
, in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX6.0.2
- createResultAccess(int) - Method in interface nxopen.cae.ResultManager
-
Creates a result access object based on an existing Post View
It is user's responsibility to destroy the result access object once done
using
ResultManager.deleteResultAccess(nxopen.cae.ResultAccess)
, in order to free up system resources
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
Created in NX8.5.2
- createResultAccessReferenceField(FieldManager, Result, ResultParameters, String, String) - Method in interface nxopen.cae.ResultManager
-
Creates a result access reference field object.
- createResultAccessReferenceField(FieldManager, Result, ResultParameters, String, String, String) - Method in interface nxopen.cae.ResultManager
-
Creates a result access reference field object with the specified independent domain.
- createResultMeasure(SimSolution, int, int, Result.Type, Result.Component, String) - Method in interface nxopen.cae.ResultMeasureCollection
-
- createResultMeasureBuilder(ResultMeasure) - Method in interface nxopen.motion.ResultMeasureCollection
-
- createResultMeasureNew(ResultMeasureResultOptions, ResultMeasureModelSubset, String) - Method in interface nxopen.cae.ResultMeasureCollection
-
Create a ResultMeasure
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createResultOptions(SimSolution, int, int, Result.Type, Result.Component) - Method in interface nxopen.cae.ResultMeasureCollection
-
- createResultOptionsNew(SimSolution, SimResultReference, int, int, Result.Type, Result.Component) - Method in interface nxopen.cae.ResultMeasureCollection
-
- createResultParameters() - Method in interface nxopen.cae.ResultManager
-
Creates a result parameter object.
- createResultParametersWithNodalForceReport(NodalForceReport) - Method in interface nxopen.cae.ResultManager
-
Creates a result parameter object for given Free Body.
- createResultParametersWithProbe(ResultProbe) - Method in interface nxopen.cae.ResultManager
-
Creates a result parameter object for given Result Probe.
- createResultPathBuilder(DurabilityResultPath) - Method in interface nxopen.cae.DurabilityExcitationCollection
-
- createResultProbeBuilder(ResultProbe) - Method in interface nxopen.cae.SimSolution
-
Creates the builder to create and edit Result Probe object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createResultsCombinationBuilder() - Method in interface nxopen.cae.ResultManager
-
Creates a results combination builder.
- createResultsEnvelopeBuilder() - Method in interface nxopen.cae.ResultManager
-
Creates a results envelope builder.
- createResultsModelExportBuilder() - Method in interface nxopen.cae.ResultManager
-
Creates a model export builder.
- createResultsReductionBuilder() - Method in interface nxopen.cae.ResultManager
-
Creates a results reduction builder.
- createResultvariable(SimSimulation, Result.Quantity, Result.Location, Result.Component, String, String) - Method in interface nxopen.cae.ResultManager
-
Creates Result Variable object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- createResultXmlFileWriter() - Method in interface nxopen.report.ReportManager
-
- createReusableBuilder(int, int, FastenerAssy.StackTypeMethod) - Method in interface nxopen.tooling.FastenerAssy
-
Creates new reusable builder
License requirements: None.
- createReusableConstraints(int) - Method in interface nxopen.tooling.AddReusablePart
-
Creates constraints for the reusable component
License requirements: None.
- createReusableObject() - Method in interface nxopen.tooling.CaeReuseLibrary
-
- createReusableObject() - Method in interface nxopen.tooling.ToolingManager
-
- createReusablePocket(boolean) - Method in interface nxopen.tooling.AddReusablePart
-
Creates pocket for a reusable component
License requirements: None.
- createReusablePocket(boolean) - Method in interface nxopen.tooling.FastenerAssy
-
Creates reusable pocket
License requirements: None.
- createReusablePocketBuilder() - Method in interface nxopen.tooling.ReusablePocketCollection
-
Creates a ReusablePocket builder
License requirements: None.
- createReverseBeamElementDirectionBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating reverse 1D element direction builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createReverseNormal(Tag, int) - Method in interface nxopen.uf.UFModeling
-
- createReverseShellElementNormalBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating reverse 2D element normal builders in a cae part
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createReverseSplitBuilder() - Method in interface nxopen.features.ShipCollection
-
- createRevisionBusinessModifierBuilder(RevisionBusinessModifier) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- createRevisonBusinessModifier(String) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- createRevolution(Tag[], int, UFModl.SweepTrimObject, String[], String[], double[], boolean, boolean, double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createRevolution1(Tag[], int, UFModl.SweepTrimObject, String[], String[], double[], boolean, boolean, double[], double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- CreateRevolution1Data() - Constructor for class nxopen.uf.UFModl.CreateRevolution1Data
-
- CreateRevolutionData() - Constructor for class nxopen.uf.UFModl.CreateRevolutionData
-
- createRevolutionDir(Tag[], int, UFModl.SweepTrimObject, String[], String[], double[], boolean, boolean, Tag, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- CreateRevolutionDirData() - Constructor for class nxopen.uf.UFModl.CreateRevolutionDirData
-
- createRevolveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Revolve builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createRevolved(Tag[], String[], double[], double[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createRevolved1(Tag[], String[], double[], double[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- createRevolvedSxview(Tag, double, double[], double[], Tag, UFDrf.Object, int, int, UFDraw.SxlineSxsegs[], double[]) - Method in interface nxopen.uf.UFDraw
-
- createRibbon(String, int) - Method in interface nxopen.uf.UFUi
-
- createRibbonBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a ribbon builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createRibBuilder(Rib) - Method in interface nxopen.features.DesignFeatureCollection
-
Creates a
RibBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- createRightBubblesToggle() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the status to create right bubbles of column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createRigidBodyBuilder(RigidBody) - Method in interface nxopen.mechatronics.RigidBodyCollection
-
- createRigidEadBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Rigid EAD block.
- createRigidEadBuilder(FEElement) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Rigid EAD block and initializes it with the input element if defined.
- createRipedge(UFModl.RipedgeData) - Method in interface nxopen.uf.UFModlSmd
-
- createRmsResultsEvaluationSettingBuilder(RmsResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates RMS results evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createRoadBuilder(Road) - Method in interface nxopen.motion.RoadCollection
-
- createRobotCartesianMove(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Robotic Cartesian Move.
- createRobotMountMove(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Robotic Mount Move.
- createRobotPoseMove(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Robotic Pose Move.
- createRollingLineBuilder(RollingLine) - Method in interface nxopen.features.ShipCollection
-
Creates a
RollingLineBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createRoomAttributesBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
RoomAttributesBuilder
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
Created in NX12.0.0
- createRoomBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
RoomBuilder
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
Created in NX12.0.0
- createRoomContainerBuilder() - Method in interface nxopen.features.ShipCollection
-
- createRoomPanelBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
RoomPanelBuilder
License requirements: nx_ship_gen_arrange ("Ship General Arrangement")
Created in NX12.0.0
- createRoomWithWall() - Method in interface nxopen.features.shipdesign.RoomBuilder
-
Returns the option to indicate whether to create wall for the room or not.
- createRotaryCamBuilder(Part, RotaryCam) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
RotaryCamBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createRotaryCamListBuilder(Part) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
RotaryCamListBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createRotaryFinishGeometryBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a rotary finish geometry builder
License requirements: cam_base ("CAM BASE")
.
- createRotaryPointMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Rotary Move to Point.
- createRotaryPolarMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Rotary Polar Move.
- createRotate(UFVariant, UFPath.Rotate, String) - Method in interface nxopen.uf.UFPath
-
- createRotateToolMoveBuilder(Move, Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Rotate Tool Move.
- createRotationalDdamExcitationBuilder(DDAMExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
Creates the builder object of
DDAMExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
- createRotationalNodalFunctionExcitationBuilder(RotationalNodalFunctionExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
- createRotationMatrix(double[], double[], double) - Method in interface nxopen.uf.UFTrns
-
- CreateRotationMatrixData() - Constructor for class nxopen.uf.UFTrns.CreateRotationMatrixData
-
- createRotationSet(double, double, Curve) - Method in interface nxopen.features.StyledSweepBuilder
-
Creates a new rotation set
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- createRoughOffset(UFModl.RoughOffset) - Method in interface nxopen.uf.UFModlFeatures
-
- createRoughTurningBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a rough turning operation builder
License requirements: cam_base ("CAM BASE")
.
- createRoundCrossSection(Tag, int, double, String[]) - Method in interface nxopen.uf.UFRoute
-
- createRouteSweptFoldBuilder(NXObject, NXObject) - Method in interface nxopen.routing.RouteManager
-
- createRouteSweptTwistBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
-
- createRouting(String) - Method in interface nxopen.routing.RoutingSystemCollection
-
- createRoutingMeasureDistanceBuilder(NXObject) - Method in interface nxopen.MeasureManager
-
- createRoutingMeasureDistanceBuilder(NXObject, MeasureDistanceBuilder) - Method in interface nxopen.MeasureManager
-
- createRoutingPlaceElbowsBuilder() - Method in interface nxopen.routing.RouteManager
-
- createRoutingPlacePartBuilder(CharacteristicList, Point3d, TaggedObject) - Method in interface nxopen.routing.RouteManager
-
Creates a
PlacePartBuilder
that is used to place
a routing part into an assembly.
- createRow(double) - Method in interface nxopen.uf.UFTabnot
-
- createRpoBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Relative Positioning Object builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createRpoConstraints(Tag, Tag, Tag, Tag[], int[], Tag[], int[], String[], String[], int) - Method in interface nxopen.uf.UFModlUi
-
- createRule() - Method in interface nxopen.ame.NamingRuleListBuilder
-
Create a new rule builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createRule(String, String, String, String, String) - Method in interface nxopen.uf.UFKf
-
- createRuleApparentChaining(ICurve, View, ApparentChainingRuleType, ApparentChainingRuleSelection, double, double) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
ApparentChainingRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.0.0
- createRuleBaseCurveDumb(IBaseCurve[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
CurveDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
- createRuleBodyDumb(Body[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
BodyDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
- createRuleBodyDumb(Body[], boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
BodyDumbRule
with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY")
Created in NX9.0.0
- createRuleBodyFacets(NXObject[]) - Method in interface nxopen.FacetSelectionRuleFactory
-
Create body facets selection rule:
BodyFacetsRule
This rule chains to collect all facets of input facet bodies.
- createRuleBodyFeature(Feature[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
BodyFeatureRule
License requirements: gateway ("UG GATEWAY")
.
- createRuleBodyFeature(Feature[], boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
BodyFeatureRule
with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY")
.
- createRuleBodyFeature(Feature[], DisplayableObject) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
BodyFeatureRule
for the given feature from a part occurrence.
- createRuleBodyFeature(Feature[], boolean, DisplayableObject) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
BodyFeatureRule
for the given feature from a part occurrence, with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY")
.
- createRuleBodyGroup(Group[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
BodyGroupRule
License requirements: gateway ("UG GATEWAY")
.
- createRuleBodyGroup(Group[], boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
BodyFeatureRule
with the option to include or exclude sheet bodies
License requirements: gateway ("UG GATEWAY")
Created in NX9.0.0
- createRuleColorRegionFacets(IFacet) - Method in interface nxopen.FacetSelectionRuleFactory
-
Creates color region facets selection intent rule:
ColorRegionRule
This rule chains to collect all neighboring facets of seed (and the neighbor-neighbors) that are of same color as that of seed facet.
- createRuleCurveChain(ICurve, ICurve, boolean, double) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
CurveChainRule
License requirements: None.
- createRuleCurveDumb(Curve[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
CurveDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleCurveDumbFromPoints(Point[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
CurveDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
- createRuleCurveFeature(Feature[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
CurveFeatureRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleCurveFeature(Feature[], DisplayableObject) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
CurveFeatureRule
for the given feature from a part occurrence.
- createRuleCurveFeatureChain(Feature[], Curve, Curve, boolean, double) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
CurveFeatureChainRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleCurveFeatureTangent(Feature[], Curve, Curve, boolean, double, double) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
CurveFeatureTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleCurveGroup(Group[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
CurveGroupRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
- createRuleCurveTangent(ICurve, ICurve, boolean, double, double) - Method in interface nxopen.ScRuleFactory
-
- createRuled(UFModl.StringList, UFModl.StringList, int, double[], int, int, UFModl.FeatureSigns, double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createRuled1(UFModl.StringList, UFModl.StringList, int, double[], int, int, UFModl.FeatureSigns, Tag, double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createRuledBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Ruled Surface builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createRuleEdgeBody(Body) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeBodyRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleEdgeBoundary(Face[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeBoundaryRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleEdgeChain(Edge, Edge, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeChainRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleEdgeChain(Edge, Edge, boolean, Face, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeChainRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
- createRuleEdgeDumb(Edge[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleEdgeFace(Face[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeFaceRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleEdgeFeature(Feature[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeFeatureRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleEdgeFeature(Feature[], DisplayableObject) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeFeatureRule
for the given feature from a part occurrence.
- createRuleEdgeIntersect(Face[], Face[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeIntersectRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleEdgeMultipleSeedTangent(Edge[], double, boolean) - Method in interface nxopen.ScRuleFactory
-
- createRuleEdgeSheetBoundary(Body) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeFeatureRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleEdgeTangent(Edge, Edge, boolean, double, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- createRuleEdgeTangent(Edge, Edge, boolean, double, boolean, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
- createRuleEdgeVertex(Edge, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeVertexRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleEdgeVertexTangent(Edge, boolean, double, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
EdgeVertexTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFaceAdjacent(Face) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceAdjacentRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFaceAllBlend(Body) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceAllBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
- createRuleFaceAllBlend(Body, Feature) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceAllBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
- createRuleFaceAndAdjacentFaces(Face) - Method in interface nxopen.ScRuleFactory
-
- createRuleFaceBody(Body) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceBodyRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFaceBossPocket(Face) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceBossPocketFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
- createRuleFaceBossPocket(Face, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceBossPocketFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
- createRuleFaceConnectedBlend(Face) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceConnectedBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
- createRuleFaceConnectedBlend(Face, boolean, Feature) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceConnectedBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
- createRuleFaceConnectedBlend(Face, boolean, boolean, Feature) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceConnectedBlendRule
License requirements: gateway ("UG GATEWAY")
Created in NX10.0.0
- createRuleFaceDatum(DatumPlane[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFaceDumb(Face[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceDumbRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFaceFacets(NXObject[]) - Method in interface nxopen.FacetSelectionRuleFactory
-
Creates face facets selection intent rule:
FaceFacetsRule
This rule chains to collect all facets of input faces or faceted bodies.
- createRuleFaceFeature(Feature[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceFeatureRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFaceFeature(Feature[], DisplayableObject) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceFeatureRule
for the given feature from a part occurrence.
- createRuleFaceMergedRib(Face, Edge) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceMergedRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
- createRuleFaceMergedRib(Face, Edge, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceMergedRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
- createRuleFaceMergedRib(Face, boolean, Point3d) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceMergedRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.0.0
- createRuleFaceRegion(Face, Face[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceRegionRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFaceRegionBoundary(Face, ICurve[], Point3d, double) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceRegionBoundaryRule
License requirements: gateway ("UG GATEWAY")
Created in NX7.0.0
- createRuleFaceRegionWithSmartBoundaries(Face, SelectionIntentRule[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceRegionRule
where the boundaries also update with original intent
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFaceRib(Face) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
- createRuleFaceRib(Face, boolean, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceRibFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
- createRuleFaceSlot(Face) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceSlotFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.0
- createRuleFaceSlot(Face, boolean, boolean) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceSlotFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
- createRuleFaceTangent(Face, Face[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceTangentRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFaceTangent(Face, Face[], double) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceTangentRule
with tangent tolerance
License requirements: gateway ("UG GATEWAY")
Created in NX8.0.0
- createRuleFaceTangentWithSmartBoundaries(Face, SelectionIntentRule[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FaceTangentRule
where the boundaries also update with original intent
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFeatureIntersectionEdges(NXObject[]) - Method in interface nxopen.ScRuleFactory
-
- createRuleFeatureIntersectionEdges(NXObject[], DisplayableObject) - Method in interface nxopen.ScRuleFactory
-
- createRuleFeaturePoints(Feature[], DisplayableObject) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FeaturePointsRule
for the given feature from a part occurrence.
- createRuleFeaturePoints(Feature[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FeaturePointsRule
License requirements: gateway ("UG GATEWAY")
Created in NX5.0.2
- createRuleFillBoundary(IFacet[], IFacet, boolean) - Method in interface nxopen.FacetSelectionRuleFactory
-
Creates fill boundary rule:
FillBoundaryRule
This rule chains to add all neighboring facets of seed (and the neighbor-neighbors) until the region reaches a closed ring of specified boundary facets.
- createRuleFineBrushFacets(Point3d, Vector3d, double, boolean, IFacet) - Method in interface nxopen.FacetSelectionRuleFactory
-
- createRuleFloodFillFacets(IFacet, boolean) - Method in interface nxopen.FacetSelectionRuleFactory
-
- createRuleFollowFillet(Feature[], Body[], ICurve[], ICurve, ICurve, boolean, Point3d, double, double, FollowFilletRuleType) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FollowFilletRule
License requirements: gateway ("UG GATEWAY")
Created in NX4.0.0
- createRuleFollowFillet(Feature[], Body[], ICurve[], ICurve, Point3d, double, double, FollowFilletRuleType) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
FollowFilletRule
with stop at intersection option ON
License requirements: gateway ("UG GATEWAY")
Created in NX7.5.0
- createRuleNoUpdate(String, String, String, String, String) - Method in interface nxopen.uf.UFKf
-
- createRuleOuterEdgesOfFaces(NXObject[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
OuterEdgesOfFacesRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
- createRuleRegionBoundary(DisplayableObject, ICurve[], Point3d, double) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
RegionBoundaryRule
License requirements: gateway ("UG GATEWAY")
Created in NX6.0.0
- createRuleRibTopFaceEdges(NXObject[]) - Method in interface nxopen.ScRuleFactory
-
Creates selection intent rule:
RibTopFaceEdgesRule
License requirements: gateway ("UG GATEWAY")
Created in NX8.5.0
- createRuleRoughBrushFacets(Point3d, Vector3d, double, boolean, IFacet) - Method in interface nxopen.FacetSelectionRuleFactory
-
- createRulesBuilder() - Method in interface nxopen.drafting.AutomationManager
-
- createRuleSingleFacet(IFacet[]) - Method in interface nxopen.FacetSelectionRuleFactory
-
Creates single facet selection intent rule:
SingleFacetRule
This rule adds given facets to collector without any chaining.
- createRun(String, String, NXObject[], NXObject[], NXObject[]) - Method in interface nxopen.routing.RunCollection
-
Creates a fully defined
Run
object whose "From" item(s),
"To" item(s), and "Member" item(s) are assigned to components in the assembly.
- createRun(String, String, CharacteristicList, RunItem[], RunItem[], RunItem[]) - Method in interface nxopen.routing.RunCollection
-
Creates a
Run
with items that are not assigned to components in the assembly.
- createRun(String, String, CharacteristicList) - Method in interface nxopen.routing.RunCollection
-
Creates an empty
Run
using just a unique Run identifier and a type.
- createRunBuilder(Run) - Method in interface nxopen.plas.PlasManager
-
- createRunContentProximitySearchTerm(SearchTerm.SearchTermLogicType, String, double, boolean) - Method in interface nxopen.assemblies.SubsetRecipe
-
- createRunContentProximitySearchTermBuilder(RunContentProximitySearchTerm) - Method in interface nxopen.assemblies.SubsetCollection
-
- createRunItem(String, RunItem.Type, CharacteristicList) - Method in interface nxopen.routing.RouteManager
-
- createRunItemsBuilder() - Method in interface nxopen.routing.DefineRunBuilder
-
Creates a RunItems used to create list item for DefineRun
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- createRunnerBuilder() - Method in interface nxopen.tooling.RunnerCollection
-
Creates a Runner builder
License requirements: None.
- createRunnerBuilder(BodyFeature) - Method in interface nxopen.tooling.RunnerCollection
-
Creates a Runner builder
License requirements: None.
- createRunSimulationBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates Run Simulation builder.
- createRuntimeBehaviorBuilder(RuntimeBehavior) - Method in interface nxopen.mechatronics.RuntimeBehaviorCollection
-
- createRuntimeFormulaBuilder(RuntimeFormula) - Method in interface nxopen.mechatronics.RuntimeFormulaCollection
-
- createRuntimeFormulaParameterBuilder(RuntimeFormulaParameter) - Method in interface nxopen.mechatronics.RuntimeFormulaCollection
-
- createRuntimeNcBuilder(RuntimeNCObject) - Method in interface nxopen.mechatronics.RuntimeNCCollection
-
- createSafetyClassBusinessModifier(String) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- createSafetyClassBusinessModifierBuilder(SafetyClassBusinessModifier) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- createSameAssemblyData(int, int) - Method in interface nxopen.tooling.FastenerAssy
-
Creates the same assembly data type
License requirements: None.
- createSaveImageFileBrowserBuilder() - Method in interface nxopen.ViewCollection
-
- createSaveToLibraryBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
SaveToLibraryBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createSbfFile(String) - Method in interface nxopen.uf.UFDrf
-
- createScalar(double, Scalar.DimensionalityType, SmartObject.UpdateOption) - Method in interface nxopen.ScalarCollection
-
Creates a scalar without parameters.
- createScalar(Scalar, Scalar, Scalar.DimensionalityType, SmartObject.UpdateOption) - Method in interface nxopen.ScalarCollection
-
Creates a scalar via an existing scalar and an optional scalar.
- createScalarDist2Pnts(Tag, UFSo.UpdateOption, Tag[]) - Method in interface nxopen.uf.UFSo
-
- createScalarDouble(Tag, UFSo.UpdateOption, double) - Method in interface nxopen.uf.UFSo
-
- createScalarDoubleDim(Tag, UFSo.UpdateOption, double, UFSo.ScalarDimOption) - Method in interface nxopen.uf.UFSo
-
- createScalarExp(Tag, UFSo.UpdateOption, Tag) - Method in interface nxopen.uf.UFSo
-
- createScalarExpDim(Tag, UFSo.UpdateOption, Tag, UFSo.ScalarDimOption) - Method in interface nxopen.uf.UFSo
-
- createScalarExpression(Expression, Scalar.DimensionalityType, SmartObject.UpdateOption) - Method in interface nxopen.ScalarCollection
-
Creates a scalar using an expression.
- createScalarExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createScalarExtractDim(Tag, UFSo.UpdateOption, Tag, Tag, UFSo.ScalarDimOption) - Method in interface nxopen.uf.UFSo
-
- createScalarFieldWrapperWithExpression(Expression) - Method in interface nxopen.fields.FieldManager
-
Create a field wrapper backed by a scalar expression
License requirements: None.
- createScalarFieldWrapperWithField(Field, double) - Method in interface nxopen.fields.FieldManager
-
Create a scalar field wrapper backed up by a scaled scalar field
License requirements: None.
- createScalarForce(UFMotion.ScalarForceTorque) - Method in interface nxopen.uf.UFMotion
-
- createScalarForceBuilder(ScalarForce) - Method in interface nxopen.motion.ScalarForceCollection
-
Return
ScalarForceBuilder
object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createScalarLengthCrv(Tag, UFSo.UpdateOption, Tag) - Method in interface nxopen.uf.UFSo
-
- createScalarObject() - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Creates a scalar object for an associative angle
License requirements: drafting ("DRAFTING")
.
- createScalarObjectFromData(Scalar, double) - Method in interface nxopen.drawings.AssociativeAngleBuilder
-
Creates scalar object for an associative angle using data from existing scalar object or angle value.
- createScalarReciprocalValue(Scalar, Scalar.DimensionalityType, SmartObject.UpdateOption) - Method in interface nxopen.ScalarCollection
-
Creates a scalar whose value is a reciprocal of another scalar
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT") OR cam_base ("CAM BASE")
.
- createScalarTorque(UFMotion.ScalarForceTorque) - Method in interface nxopen.uf.UFMotion
-
- createScalarTorqueBuilder(ScalarTorque) - Method in interface nxopen.motion.ScalarTorqueCollection
-
Return
ScalarTorqueBuilder
object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createScale(UFModl.ScaleType, Tag[], int, Tag, Tag, Tag, String[]) - Method in interface nxopen.uf.UFModeling
-
- createScaleBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ScaleBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createScaleCurveBuilder(ScaleCurve) - Method in interface nxopen.features.CurveFeatureCollection
-
Creates a
ScaleCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX11.0.0
- createScalingMatrix(int, double[], double[]) - Method in interface nxopen.uf.UFTrns
-
- CreateScalingMatrixData() - Constructor for class nxopen.uf.UFTrns.CreateScalingMatrixData
-
- createScalingSet(double, double, double, Curve) - Method in interface nxopen.features.StyledSweepBuilder
-
Creates a new scaling set
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- createScenarioNx(String) - Method in interface nxopen.uf.UFSf
-
- createScene(View, boolean) - Method in interface nxopen.ViewCollection
-
Creates a
Scene
License requirements: None.
- createSchematicNode(Sheet, AMEEngObject, double, double, String) - Method in interface nxopen.ame.DiagramManager
-
Create Schematic Diagram Node
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createSchematicSymbolConfigurationBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createSCOUTExportBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createSCOUTImportBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createScrap() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the create scrap setting of the pierce task.
- createScrap() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the create scrap setting of the trim task.
- createScrap() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the create scrap.
- createScrapDesignBuilder() - Method in interface nxopen.tooling.ScrapDesignCollection
-
Creates a
ScrapDesignBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createScrewJointBuilder(ScrewJoint) - Method in interface nxopen.mechatronics.ScrewJointCollection
-
- createSeamBlockBuilder() - Method in interface nxopen.features.shipdesign.BuiltUpBlockBuilder
-
- createSeamBuilder(Seam) - Method in interface nxopen.features.ShipCollection
-
- createSeamsAtKnuckles() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the flag that indicates if seams are to be created or updated at knuckle locations.
- createSeamsAtKnuckles() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the flag that indicates if seams are to be created or updated at knuckle locations.
- createSearchCriteriaDatumFeatureSymbolBuilder(NXObject) - Method in interface nxopen.annotations.SearchModelViewCollection
-
- createSearchCriteriaDatumTargetBuilder(NXObject) - Method in interface nxopen.annotations.SearchModelViewCollection
-
- createSearchCriteriaDimensionBuilder(NXObject) - Method in interface nxopen.annotations.SearchModelViewCollection
-
- createSearchCriteriaFeatureControlFrameBuilder(NXObject) - Method in interface nxopen.annotations.SearchModelViewCollection
-
- createSearchCriteriaPminotesBuilder(NXObject) - Method in interface nxopen.annotations.SearchModelViewCollection
-
- createSearchCriteriaSurfaceFinishBuilder(NXObject) - Method in interface nxopen.annotations.SearchModelViewCollection
-
- createSearchModelViewBuilder(ModelingView) - Method in interface nxopen.annotations.SearchModelViewCollection
-
Creates the Search PMI builder
License requirements: None.
- createSeatBeltAnchorageBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createSeatBeltAnchorageBuilder(SeatBeltAnchorage) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
SeatBeltAnchorageBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createSecondaryGeometryInViewsBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
- createSection() - Method in interface nxopen.die.AddendumSectionBuilder
-
Create addendum section using previously supplied parameters.
- createSection(double, double, double) - Method in interface nxopen.SectionCollection
-
Creates a section.
- createSection() - Method in interface nxopen.SectionCollection
-
Creates a section using default values for chaining, distance, and angle tolerance.
- createSection(NXObject) - Method in interface nxopen.SectionCollection
-
Creates a section with Single Curve rule using the given curve, edge or point.
- createSection() - Method in interface nxopen.SketchAssociativeTrimBuilder
-
The function creates a new empty section object and adds it to the builder
License requirements: None.
- createSection() - Method in interface nxopen.SketchOffsetBuilder
-
The function creates a new empty section object and adds it to the builder
License requirements: None.
- createSectionAnalysisBuilder(SectionAnalysisObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a Section Analysis object builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- createSectionAnalysisExBuilder(SectionAnalysisExObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a Section Analysis builder of a new version
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- createSectionBuilder(DynamicSection, ModelingView) - Method in interface nxopen.display.DynamicSectionCollection
-
- createSectionBuilder(ModelingView) - Method in interface nxopen.display.DynamicSectionCollection
-
- createSectionCurve() - Method in interface nxopen.features.EditCrossSectionBuilder
-
Create the section curves.
- createSectionCurveBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SectionCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createSectionDrawingBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
SectionDrawingBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX10.0.0
- createSectionEditBuilder(SectionEdit) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SectionEditBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createSectionEditorBuilder(DraftingView) - Method in interface nxopen.features.ShipCollection
-
Creates a
SectionEditorBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX11.0.0
- createSectionForGuidedExtensionPreview() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Method to create a section for the preview of guided extension surface
License requirements: None.
- createSectionFromReuse(String) - Method in interface nxopen.die.AddendumSectionBuilder
-
Creates a section using the information stored in the reuse library.
- createSectionInertiaAnalysisBuilder(SectionInertiaAnalysis) - Method in interface nxopen.features.FeatureCollection
-
- createSectionInViewBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
Creates the Section In View Builder
License requirements: drafting ("DRAFTING")
.
- createSectionLine() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- createSectionLineBuilder(SectionLine) - Method in interface nxopen.drawings.SectionLineCollection
-
- createSectionLineCreationBuilder() - Method in interface nxopen.tooling.ToolingDrawingCollection
-
Creates section line creation builder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createSectionLineSegmentBuilder() - Method in interface nxopen.drawings.SectionLineCollection
-
- createSectionLineSegmentPointBuilder() - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
- createSectionLineStyleBuilder(SectionLine) - Method in interface nxopen.drawings.SectionLineCollection
-
- createSectionPlaneCurves() - Method in interface nxopen.weld.WeldPointBuilder
-
Create section curve
License requirements: ugweld ("UG WELD")
.
- createSectionSurfaceBuilder(SectionSurface) - Method in interface nxopen.features.FeatureCollection
-
- createSectionSurfaceBuilderEx(SectionSurface) - Method in interface nxopen.features.FeatureCollection
-
- createSectionsUsingCurves(NXObject[], SectionCollection.LoopOption, double, double, double) - Method in interface nxopen.SectionCollection
-
Creates sections using curves such that each section can be extruded to produce one body.
- createSectionView(String, NXObject, double[], double[], double[], double[], double[], int[], String, String[]) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Create section view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createSectionViewBuilder(NXObject) - Method in interface nxopen.drawings.DraftingViewCollection
-
Creates the Section View Builder
License requirements: drafting ("DRAFTING")
.
- createSectionViewBuilder() - Method in interface nxopen.features.shipdesign.SectionDrawingBuilder
-
Creates a
SectionViewBuilder
License requirements: nx_ship_drafting ("Ship Drafting")
Created in NX10.0.0
- createSegment(Curve, ControlPoint, ControlPoint, UserDefined) - Method in interface nxopen.routing.SegmentManager
-
Creates a
ISegment
object following a curve.
- createSegment(ControlPoint, ControlPoint) - Method in interface nxopen.routing.SegmentManager
-
- createSegmentBuilder() - Method in interface nxopen.motion.RoadBuilder
-
Creates a new segment builder for the road object of type path
License requirements: mechanisms ("MECHANISMS")
.
- createSegments(Component) - Method in interface nxopen.routing.BuiltInPath
-
Creates the segments in the work part to cover any curves referenced by the
Routing.BuiltInPath object in the component part file.
- createSegmentsFromCenterlineCurves() - Method in interface nxopen.die.DrawBeadBuilder
-
For each curve of the centerline, create a bead segment.
- createSegOnCurve(Tag, Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- createSegThruRcps(Tag, Tag) - Method in interface nxopen.uf.UFRoute
-
- createSelectElementsBuilder() - Method in interface nxopen.cae.SelectElementsManager
-
Creates a builder for element select command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSelectHead(UFVariant, UFPath.HeadType, String) - Method in interface nxopen.uf.UFPath
-
- createSelectionBuilder(PartGeometryCopyBuilder.Type) - Method in interface nxopen.features.PartGeometryCopyBuilder
-
Creates a part geometry copy select builder
License requirements: None.
- createSelectionList() - Method in interface nxopen.Part
-
- createSelectionSet(int, NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
-
- createSelectionSet(CharacteristicsBuilder.Type, NXObject) - Method in interface nxopen.weld.CharacteristicsBuilder
-
Create a new selection set and add it to the list.
- createSelectionSubscriber() - Method in interface nxopen.Selection
-
Creates a Selection Subscriber
License requirements: None.
- createSelectRegionBuilder() - Method in interface nxopen.drawings.DrawingRegionCollection
-
Creates select region builder
License requirements: nx_drawing_auto ("NX Drawing Automation")
.
- createSelPref() - Method in interface nxopen.display.SelPrefCollection
-
Create a
SelPref
object
License requirements: None.
- createSensitivityViewerBuilder(ModelUpdateSolution) - Method in interface nxopen.cae.ModelUpdateSolutionCollection
-
Creates the builder object of model update sensitivity viewer
License requirements: nx_correl_update ("FE Model Update")
.
- createSensorBuilder(Sensor) - Method in interface nxopen.cae.responsesimulation.SensorCollection
-
Creates a sensor buider
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createSensorConfigBuilder(PreTestSensorConfig) - Method in interface nxopen.cae.PreTestSolutionCollection
-
Creates a sensor configuration dialog builder
License requirements: nx_correl_base ("FE Correlation")
.
- createSensorEvaluationSettingBuilder(SensorEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates sensor evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createSensorsActuatorsListBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createSeparateParts() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the value that determines if separate pars are created
License requirements: None.
- createSeqno(UFVariant, UFPath.Seqno, int, int, int, String) - Method in interface nxopen.uf.UFPath
-
- createSequence(String) - Method in interface nxopen.motion.PostProcess
-
Create sequence
License requirements: mechanisms ("MECHANISMS")
.
- createSequence(String, Tag) - Method in interface nxopen.uf.UFAssem
-
- createSeResult(Result, int) - Method in interface nxopen.cae.ResultManager
-
Creates a result object given a Super Element ID within
an existing
Result
.
- createSetMode(UFVariant, UFPath.OutputMode, UFPath.FeedrateMode, UFPath.ArcMode, UFPath.ParallelMode, UFPath.MachineMode, String) - Method in interface nxopen.uf.UFPath
-
- createSetModeBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
SetModeBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createSetOfFeature(String, Tag[], int, int) - Method in interface nxopen.uf.UFModeling
-
- createSetPressModelBuilder() - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
SetPressModelBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createSetPressModelBuilder() - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Set Press Model builder.
- createSew(int, int, Tag[], int, Tag[], double, int) - Method in interface nxopen.uf.UFModeling
-
- createSewBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Sew feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- CreateSewData() - Constructor for class nxopen.uf.UFModeling.CreateSewData
-
- createSewFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
SewFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM") OR die_engineering ("DIE ENGINEERING")
Created in NX9.0.0
- createShadowCurves(int, Tag[], Tag) - Method in interface nxopen.uf.UFCurve
-
- CreateShadowCurvesData() - Constructor for class nxopen.uf.UFCurve.CreateShadowCurvesData
-
- createShadows(View) - Method in interface nxopen.ViewCollection
-
Creates a
Shadows
License requirements: None.
- createShapeBuilder(Shape) - Method in interface nxopen.diagramming.ShapeCollection
-
- createShapeMetricViewerBuilder(CorrelSolution) - Method in interface nxopen.cae.CorrelSolutionCollection
-
Creates the builder object of correl shape metric viewer
License requirements: nx_correl_base ("FE Correlation")
.
- createShapeOptimizationSolutionBuilder(TBSShapeOptimizationSolution) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
- createShapeRestrictAreaBuilder(TBSShapeRestrictArea) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
Create the builder of
TBSRestrictAreaBuilder
License requirements: cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.5.0
- createShapeSearchBuilder(Part) - Method in interface nxopen.shapesearch.SearchManager
-
- createShapeSegmentBuilder(ISegment) - Method in interface nxopen.formboard.FormboardManager
-
- createSheet() - Method in interface nxopen.tooling.CalculateAreaBuilder
-
Returns the option to indicate creating projected sheet or not
License requirements: None.
- createSheetBody(boolean) - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Creates unform sheet body result.
- createSheetBordersAndZonesBuilder(SheetBordersAndZones) - Method in interface nxopen.diagramming.SheetBordersAndZonesCollection
-
Creates a borders and zones builder
License requirements: drafting ("DRAFTING")
.
- createSheetBuilder(Sheet) - Method in interface nxopen.diagramming.SheetCollection
-
- createSheetMetalFeatureRecognitionBuilder() - Method in interface nxopen.tooling.MoldwizardManager
-
Creates sheet metal feature recognition builder.
- createSheetMetalFromSolidBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
- createSheetTemplateBuilder(Part, Sheet) - Method in interface nxopen.pid.PidManager
-
Creates a
SheetTemplateBuilder
License requirements: nx_pid_design_author ("NX P and ID Design Author")
Created in NX11.0.0
- createSheetZoneReferenceBuilder() - Method in interface nxopen.DraftingManager
-
Creates the Sheet Zone Reference builder
License requirements: drafting ("DRAFTING")
.
- createShelfBuilder(Shelf) - Method in interface nxopen.features.AeroCollection
-
Creates a
ShelfBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createShell2solidBuilder(Mesh3d) - Method in interface nxopen.cae.MeshManager
-
Creates a shell to solid builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createShellBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates an Shell builder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.
- createShellEadBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Shell EAD block.
- createShellEadBuilder(FEElement) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Shell EAD block and initializes it with the input element if defined.
- createShellExpansionBuilder(ShellExpansion) - Method in interface nxopen.features.ShipCollection
-
Creates a
ShellExpansionBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX7.5.0
- createShellFaceBuilder(ShellFace) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ShellFaceBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createShellTemplateBuilder(ShellTemplate) - Method in interface nxopen.features.ShipCollection
-
Creates a
ShellTemplateBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createShellto3dhybridBuilder(Mesh3d) - Method in interface nxopen.cae.MeshManager
-
Creates a shell to 3d hybrid builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createShieldConnection() - Method in interface nxopen.routing.electrical.CableConnectionCollection
-
- createShimBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
- createShimInnerProfileSetBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
- createShipAttributeHolder() - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipAttributeHolder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createShipAttributeHolderWithFeature(String) - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipAttributeHolder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createShipbuildingLineBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
- createShipContainerBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipContainerBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.0.0
- createShipCoordinatesBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipCoordinatesBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createShipCutoutBuilder(ShipCutout) - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipCutoutBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
- createShipDesignPreferencesBuilder() - Method in interface nxopen.features.ShipCollection
-
- createShipDesignVersionUpBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipDesignVersionUpBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX9.0.0
- createShipDimensionBuilder(Dimension) - Method in interface nxopen.annotations.ShipDimensionCollection
-
- createShipDraftingViewLinesBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
- createShipEndCutBuilder(ShipEndCut) - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipEndCutBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
- createShipFeatureConverter() - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipFeatureConverter
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
- createShipFlatPatternBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
- createShipIntersectionsBuilder(ShipIntersections) - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipIntersectionsBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX7.5.0
- createShipMeshAutomationBuilder(ShipMeshAutomation) - Method in interface nxopen.cae.MeshManager
-
Creates a ship mesh automation builder
License requirements: nx_masterfem ("Finite Element Modeling"), nx_ship_basic ("Ship Basic Design")
.
- createShipNavigatorNodeBuilder(boolean, NavigatorNode) - Method in interface nxopen.shipdesign.NavigatorCollection
-
- createShipPreparationBuilder() - Method in interface nxopen.features.ShipCollection
-
- createShipProfileCutoutBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
- createShipSectionBuilder(ShipSection) - Method in interface nxopen.features.ShipCollection
-
Creates a
ShipSectionBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX7.5.0
- createShipTrimBodyBuilder(ShipTrimBody) - Method in interface nxopen.features.ShipCollection
-
- createShm() - Method in interface nxopen.mechatronics.SHMSignalProviderBuilder
-
Returns Get the Ceate SHM toggle status.
- createSHMConfigurationBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createSHMSignalConnectionBuilder(SHMSignalConnection) - Method in interface nxopen.mechatronics.SHMSignalConnectionCollection
-
- createShowAdjacentBuilder() - Method in interface nxopen.cae.ShowHideManager
-
Creates a builder for Show Adjacent Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createShowAdjacentGroupMethod(CaeGroup, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a show adjacent group method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createShowComponentBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
Creates a
ShowComponentBuilder
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX6.0.0
- createShowHideBuilder() - Method in interface nxopen.cae.ShowHideManager
-
Creates a builder for Show Hide Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createShowHideGroupMethod(CaeGroup, boolean) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a show hide group method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createShowHideObjectsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Create Show/Hide Objects Builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createShowOnlyBuilder() - Method in interface nxopen.cae.ShowHideManager
-
Creates a builder for Show Only Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createShowRelatedFacesBuilder() - Method in interface nxopen.features.FeatureCollection
-
Creates a
ShowRelatedFacesBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX7.0.0
- createSideSeam(Tag, Tag, Tag, double[], UFDrf.WeldSymbols) - Method in interface nxopen.uf.UFDrf
-
- createSignalAdapterBuilder(SignalAdapter) - Method in interface nxopen.mechatronics.SignalAdapterCollection
-
- createSignalAttributes(FemSignalProcessingSignalAttributes.SpectrumScalings, FemSignalProcessingSignalAttributes.CorrectionModes, double, double, FemSignalProcessingSignalAttributes.AcousticalWeightings) - Method in interface nxopen.cae.FemSignalProcessingApplication
-
Creates a new set of signal attributes that can be attached to a field.
- createSignalBuilder(Signal) - Method in interface nxopen.mechatronics.SignalCollection
-
- createSignalChartBuilder(SignalChart) - Method in interface nxopen.motion.SignalChartCollection
-
Return
SignalChartBuilder
object
License requirements: nx_motion_motor ("NX Motion Motor")
Created in NX6.0.0
- createSignalChartListItem() - Method in interface nxopen.motion.SignalChartCollection
-
Creates a
SignalChartListItem
License requirements: nx_motion_motor ("NX Motion Motor")
Created in NX6.0.0
- createSignalConnectionBuilder(MATLABSignalConnection) - Method in interface nxopen.mechatronics.MATLABSignalConnectionCollection
-
- createSignalConnectionBuilder(SignalConnection) - Method in interface nxopen.mechatronics.SignalConnectionCollection
-
Creates a
SignalConnectionBuilder
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
Created in NX8.5.0
- createSignalMappingBuilder() - Method in interface nxopen.mechatronics.PhysicsManager
-
- createSilhouette(Tag, Tag) - Method in interface nxopen.uf.UFCurve
-
- CreateSilhouetteData() - Constructor for class nxopen.uf.UFCurve.CreateSilhouetteData
-
- createSilhouetteFlangeBuilder(SilhouetteFlange) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SilhouetteFlangeBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
- createSimBcPlotContoursBuilder() - Method in interface nxopen.cae.SimSimulation
-
- createSimBcXyPlotBuilder() - Method in interface nxopen.cae.SimSimulation
-
Creates a
SimBcXyPlotBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX9.0.0
- createSimDebugBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a sim debug builder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createSimpleHole(double[], double[], String, String, String, Tag, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createSimpleInterferenceObject() - Method in interface nxopen.geometricanalysis.AnalysisManager
-
Creates a simple interference object
License requirements: None.
- createSimpleSxview(Tag, double, double[], double[], Tag, UFDrf.Object, double[]) - Method in interface nxopen.uf.UFDraw
-
- createSimplifiedCurve(int, Tag[], double) - Method in interface nxopen.uf.UFCurve
-
- createSimplifiedCurve(Tag, Tag, boolean) - Method in interface nxopen.uf.UFDraw
-
- CreateSimplifiedCurveData() - Constructor for class nxopen.uf.UFCurve.CreateSimplifiedCurveData
-
- CreateSimplifiedCurveData() - Constructor for class nxopen.uf.UFDraw.CreateSimplifiedCurveData
-
- createSimplify(UFModl.SimplData) - Method in interface nxopen.uf.UFModlFeatures
-
- CreateSimplifyData() - Constructor for class nxopen.uf.UFModlFeatures.CreateSimplifyData
-
- createSimplifyPathBuilder(ISegment[]) - Method in interface nxopen.routing.RouteManager
-
- createSimulation(NXObject) - Method in interface nxopen.motion.MotionSession
-
- createSimulation(String, Tag, int, String[]) - Method in interface nxopen.uf.UFSf
-
- createSimulationLoadsnapshotBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for the load snapshot
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createSimulationObject(String, String) - Method in interface nxopen.cae.SimSimulationObjectCollection
-
Creates a Simulation object for the simulation object descriptor passed
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createSimulationObjectGroup() - Method in interface nxopen.cae.SimGroupContainer
-
Creates a simulation object group for a solution or solution step
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createSimulationOptionsBuilder(SimulationOptionsBuilder.DialogType) - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a simulation options
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createSimulationSavesnapshotBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for the save snapshot
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createSineEventBuilder(LaminateSineEvent) - Method in interface nxopen.cae.LaminateDynamicEventCollection
-
Creates a builder for the laminate sine event.
- createSingle2DComponentDefinition() - Method in interface nxopen.layout2d.CreateComponentFrom3DSettingsBuilder
-
Returns the settings to determines whether or not create single 2D component definition
License requirements: None.
- createSingleFeatures() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the control option to determine if individual features should be created.
- createSingleJointFromFeature(Curve, boolean) - Method in interface nxopen.weld.WeldJointBuilder
-
Creates a joint from a feature.
- createSingleLabelRecipe(String, int) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Creates a Single Node Label Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createSingleObjective(TBSDesignResponse, double, double) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
Creates an object of
TBSSingleObjective
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
- createSingleWeldPoint(Point3d) - Method in interface nxopen.weld.WeldPointBuilder
-
The creation for single weld point
License requirements: ugweld ("UG WELD")
.
- createSinumerikCaExportBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a sinumerik ca export spf
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createSinumerikCaFacetBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a sinumerik ca facet
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createSinumerikCaPlaceholderBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a sinumerik ca placeholder
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createSinumerikCaSimplifyBodiesBuilder() - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a builder for a sinumerik ca simplify bodies
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createSkecthRectangle(Sketch) - Method in interface nxopen.shipdesign.GeneralArrangementManager
-
Creates the rectangle for Deck Plan sketch.
- createSketch() - Method in interface nxopen.features.OptimizeCurveBuilder
-
Returns the create sketch flag.
- createSketch(String, ISurface, IReferenceAxis, Vector3d, AxisOrientation, Sense, PlaneNormalOrientation) - Method in interface nxopen.SketchCollection
-
- createSketch(String, ISurface, IReferenceAxis, Vector3d, AxisOrientation, Sense, PlaneNormalOrientation, NXObject) - Method in interface nxopen.SketchCollection
-
- createSketch(NXObject, Point3d) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Creates new sketch on drop face and location
License requirements: None.
- createSketch(String, int, double[], Tag[], int[], int) - Method in interface nxopen.uf.UFSket
-
- createSketchAlongPathBuilder(Sketch) - Method in interface nxopen.SketchCollection
-
Creates a
SketchAlongPathBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX5.0.0
- createSketchAssociativeTrimBuilder(SketchAssociativeTrim) - Method in interface nxopen.SketchCollection
-
Creates a
SketchAssociativeTrimBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX6.0.0
- createSketchChamferBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchChamferBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createSketchConicBuilder(NXObject) - Method in interface nxopen.SketchCollection
-
Creates a
SketchConicBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX6.0.0
- createSketchEllipseBuilder(NXObject) - Method in interface nxopen.SketchCollection
-
Creates a
SketchEllipseBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX6.0.0
- createSketches() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
- createSketchFitCurveBuilder(Curve) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SketchFitCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
- createSketchInDraftingBuilder() - Method in interface nxopen.SketchCollection
-
Creates a
SketchInDraftingBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX5.0.0
- createSketchInPlaceBuilder2(Sketch) - Method in interface nxopen.SketchCollection
-
Creates a
SketchInPlaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX11.0.0
- createSketchMirrorPatternBuilder(SketchPattern) - Method in interface nxopen.SketchCollection
-
Creates a
SketchMirrorPatternBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createSketchOffsetBuilder(SketchOffset) - Method in interface nxopen.SketchCollection
-
- createSketchPasteBuilder(Sketch[]) - Method in interface nxopen.SketchCollection
-
Creates a
SketchPasteBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createSketchPatternBuilder(SketchPattern) - Method in interface nxopen.SketchCollection
-
Creates a
SketchPatternBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createSketchPolygonBuilder(SketchPolygon) - Method in interface nxopen.SketchCollection
-
Creates a
SketchPolygonBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
Created in NX7.5.0
- createSketchSectionLineBuilder(SectionLine) - Method in interface nxopen.drawings.SectionLineCollection
-
Creates the Sketch Section Line builder
License requirements: drafting ("DRAFTING")
.
- createSketchSplineBuilder(Spline) - Method in interface nxopen.features.FeatureCollection
-
Creates a Studio Spline builder for sketcher
License requirements: features_modeling ("FEATURES MODELING") OR geometric_tol ("GDT"), solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- createSkipWelds() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns a value indicating whether to create skip welds
License requirements: ugweld ("UG WELD")
.
- createSlidingJointBuilder(SlidingJoint) - Method in interface nxopen.mechatronics.SlidingJointCollection
-
- createSliverFaceMethod(CAEBody, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createSliverFaceMethod(CAEBody[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createSliverFaceMethod(CAEBody[], boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a sliver face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSliverFaceMethod(CAEFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createSliverFaceMethod(CAEFace[], boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a sliver face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSlopeAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollectionEx
-
Creates a slope analysis builder.
- createSlopeBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createSlopeBuilder(Slope) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
SlopeBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createSlopeConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a slope constraint.
- createSlugRetentionBuilder(FeatureGroup) - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates slug retention builder.
- createSmartCompositeCurve(Section, SmartObject.UpdateOption, double) - Method in interface nxopen.CurveCollection
-
- createSmartCompositeCurve(Curve, SmartObject.UpdateOption) - Method in interface nxopen.CurveCollection
-
- createSmartRuleBuilder(SmartRule) - Method in interface nxopen.features.ShipCollection
-
Creates a
SmartRuleBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
- createSmartSaveBuilder(SmartSaveBuilder.SaveType) - Method in interface nxopen.pdm.PdmSession
-
- createSmartSaveBuilderWithContext(SmartSaveContext) - Method in interface nxopen.pdm.PdmSession
-
- createSmartSaveContext(SmartSaveBuilder.SaveType) - Method in interface nxopen.pdm.PdmSession
-
- createSmartScrewUpdateBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates a
SmartScrewUpdateBuilder
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX11.0.0
- createSmashComponentBuilder() - Method in interface nxopen.layout2d.ComponentCollection
-
Creates a
SmashComponentBuilder
that can smash the selected
2D Component instance
License requirements: nx_layout ("NX Layout")
Created in NX10.0.0
- createSmashCustomSymbolBuilder() - Method in interface nxopen.annotations.CustomSymbolCollection
-
Smashes a custom symbol
License requirements: None.
- createSmashDrawingViewBuilder() - Method in interface nxopen.drafting.DraftingApplicationManager
-
- createSmbend(UFModl.SmbendData) - Method in interface nxopen.uf.UFModlSmd
-
- createSmbendCorner(UFModl.SmbendCornerData) - Method in interface nxopen.uf.UFModlSmd
-
- createSmbendCylinder(UFModl.SmbendCylinderData) - Method in interface nxopen.uf.UFModlSmd
-
- createSMBoundaryCondition() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Create a new boundary condition.
- createSmcorner(UFModl.SmcornerData) - Method in interface nxopen.uf.UFModlSmd
-
- createSmcutout(UFModl.SmcutoutData) - Method in interface nxopen.uf.UFModlSmd
-
- createSmdFlange(Tag, Tag, double[], double[], double[], UFModl.FlangeData) - Method in interface nxopen.uf.UFModlSmd
-
- createSmhole(UFModl.SmholeData) - Method in interface nxopen.uf.UFModlSmd
-
- createSmjoggle(UFModl.SmjoggleData) - Method in interface nxopen.uf.UFModlSmd
-
- createSmoothBuilder(TBSSmooth) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
Creates the builder of
TBSSmoothBuilder
License requirements: cae_opt_topo ("NX Topology Optimization") OR cae_opt_topobead ("NX Bead Optimization") OR cae_opt_toposhape ("NX Shape Optimization")
Created in NX8.0.0
- createSmoothCurveStringBuilder(SmoothCurveString) - Method in interface nxopen.features.FreeformCurveCollection
-
- createSmoothFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
SmoothFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX7.5.0
- createSmoothSplineBuilder(SmoothSpline) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SmoothSplineBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
Created in NX6.0.0
- createSmpunch(UFModl.SmpunchData) - Method in interface nxopen.uf.UFModlSmd
-
- createSmrelief(UFModl.SmreliefData) - Method in interface nxopen.uf.UFModlSmd
-
- createSmslot(UFModl.SmslotData) - Method in interface nxopen.uf.UFModlSmd
-
- createSnap3dmodelsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
Snap3DModelsBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createSnapshot() - Method in interface nxopen.dmu.SnapshotCollection
-
- createSnapshot() - Method in interface nxopen.DrawingCompareManager
-
Caches data for drafting objects in the drawing part.
- createSnapshotCollection(Part) - Method in interface nxopen.dmu.DMUManager
-
- createSnipFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
SnipFacetBodyBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
- createSnipIntoPatchesBuilder() - Method in interface nxopen.geometricutilities.CAMDataPrepManager
-
- createSnipSurfaceBuilder(SnipSurface) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SnipSurfaceBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
- createSnipSurfaceFeature(UFModl.SnipsrfFeatureData) - Method in interface nxopen.uf.UFModlFeatures
-
- createSocket(Sheet, double, double) - Method in interface nxopen.ame.DiagramManager
-
Create Socket Diagram Node Copy
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createSolidDensityObject() - Method in interface nxopen.geometricanalysis.AnalysisManager
-
Creates a solid density object
License requirements: None.
- createSolidEdgeImporter() - Method in interface nxopen.ImportManager
-
Creates a Solid Edge importer object.
- createSolidElementFaceNormalBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Provides access for creating solid element face normal builder in a cae part
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSolidPropertyCheckBuilder() - Method in interface nxopen.cae.ModelCheckManager
-
Creates a builder for solid properties check command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSolidPunch(UFModl.SolidPunchData) - Method in interface nxopen.uf.UFModlSmd
-
- createSolidPunchBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Creates a
SolidPunchBuilder
License requirements: nx_sheet_metal ("NX Sheet Metal")
Created in NX5.0.0
- createSolidSetting() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the option for creating interference solids for HD3D.
- createSolidTrackingBuilder(SolidTrackPoint) - Method in interface nxopen.cam.Tool
-
Creates a Solid Trackpoint builder
License requirements: cam_base ("CAM BASE")
.
- createSolution(String, String, String, String) - Method in interface nxopen.cae.SimSimulation
-
- createSolution(String, String, String, String, SimSimulation.AxisymAbstractionType) - Method in interface nxopen.cae.SimSimulation
-
Creates a solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createSolution(SimConditionSequence, String, String, String, String) - Method in interface nxopen.cae.SimSimulation
-
- createSolution(SimConditionSequence, int, String, String, String, String) - Method in interface nxopen.cae.SimSimulation
-
- createSolution(SimConditionSequence, double, Unit, String, String, String, String) - Method in interface nxopen.cae.SimSimulation
-
- createSolution(NodalForceReport, String, NodalForceReport.SubcaseOption, SimSolutionStep, boolean, boolean) - Method in interface nxopen.cae.SimSimulation
-
Creates a solution from free body
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSolutionBuilder(CorrelSolution) - Method in interface nxopen.cae.CorrelSolutionCollection
-
Creates the builder object of correl meta solution
License requirements: None.
- createSolutionBuilder(ModelUpdateSolution) - Method in interface nxopen.cae.ModelUpdateSolutionCollection
-
Creates the builder object of model update meta solution
License requirements: None.
- createSolutionBuilder(Solution) - Method in interface nxopen.cae.responsesimulation.SolutionCollection
-
Creates the builder object of response analysis meta solution
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createSolutionBuilder(MotionSolution) - Method in interface nxopen.motion.MotionSolutionCollection
-
- createSolutionManager() - Method in interface nxopen.cae.SimSimulation
-
Creates a
SolutionManager
for the active solution environment
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX10.0.0
- createSolutionNx(Tag, Tag, String) - Method in interface nxopen.uf.UFSf
-
- createSolutionResult(SimSolution) - Method in interface nxopen.cae.ResultManager
-
- createSolutionStep(SimSolution, int, String) - Method in interface nxopen.cae.SimSimulation
-
Creates a step and add to the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createSolverAppendOption() - Method in interface nxopen.cae.CaePart
-
Returns a solver append option object for importing the solver specific data into an existing
FemPart
or
SimPart
.
- createSolverBuilder(DurabilityMetaSolution) - Method in interface nxopen.cae.DurabilityManager
-
Creates a builder for the durability metasolution solver.
- createSpaceReservationBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Creates a Space Reservation builder.
- createSpacingExp() - Method in interface nxopen.SketchPatternBuilder
-
Returns the flag to indicate if a spacing expression needs to be created
License requirements: None.
- createSpatialGraph(int, String, Post.GraphParameters, int) - Method in interface nxopen.cae.Post
-
Create a graph by extracting data from the input postview id, along an input path id
The input postview id is what was returned from CreatePostview or CreatePostviewForResult.
- createSpatialMapBuilder(SpatialMap) - Method in interface nxopen.fields.FieldManager
-
- createSpecialFormingBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates a
SpecialFormingBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX11.0.0
- createSpecialistSolutionBuilder(DurSpecialistSolution) - Method in interface nxopen.cae.DurSpecialistSolutionCollection
-
Creates a
DurSpecialistSolutionBuilder
License requirements: nx_adv_durability ("NX Advanced Durability")
Created in NX12.0.0
NX_REMOVE_FROM_JAVA_API
- createSpecialPiercingInsertBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
- createSpecificationsForLogicalObjects(LogicalObject[]) - Method in interface nxopen.pdm.PartOperationBuilder
-
Create new specifications for Logical Objects
License requirements: None.
- createSpecificationsForSmartSaveObjects(SmartSaveObject[]) - Method in interface nxopen.pdm.SmartSaveBuilder
-
Create new specifications for Logical Objects
License requirements: None.
- createSpecificNoteBuilder(SpecificNote) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createSpecifyDateBuilder() - Method in interface nxopen.visualreporting.VisualReportManager
-
- createSpecifyRuleBuilder() - Method in interface nxopen.drafting.AutomationManager
-
- createSpeedControlBuilder(SpeedControl) - Method in interface nxopen.mechatronics.SpeedControlCollection
-
- createSphere(UFModl.FeatureSigns, Tag, double[], String) - Method in interface nxopen.uf.UFModlFeatures
-
- createSphere1(UFModl.FeatureSigns, double[], String) - Method in interface nxopen.uf.UFModlFeatures
-
- createSphereBoundingVolumeRecipe(String, Point, Expression, CaeSetGroupFilterType[]) - Method in interface nxopen.cae.SelectionRecipeCollection
-
Create a Bounding Volume Selection Recipe
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createSphereBuilder(Sphere) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SphereBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createSphericalCoordinateSystem(Point3d, Vector3d, Vector3d) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a new spherical coordinate system
License requirements: None.
- createSphericalCoordinateSystem(Point3d, NXMatrix, boolean) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a new spherical coordinate system
License requirements: None.
- createSphericalCoordinateSystem(Xform, SmartObject.UpdateOption) - Method in interface nxopen.CoordinateSystemCollection
-
Creates a SphericalCoordinateSystem from a Xform and update option.
- createSphericalCornerBuilder(SphericalCorner) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SphericalCornerBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX8.5.0
- createSpiderElementBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for spider element command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSpindleOff(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createSpindleOn(UFVariant, UFPath.SpindleOn, String) - Method in interface nxopen.uf.UFPath
-
- createSpindleReverse(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createSpindleSliderBuilder() - Method in interface nxopen.tooling.AutoDieCollection
-
Creates a Spindle Slider builder.
- createSpine() - Method in interface nxopen.routing.RouteSweptTwistBuilder
-
Creates a new spine
License requirements: routing_harness ("Routing Harness")
.
- createSpineCurveBuilder(SpineCurve) - Method in interface nxopen.features.FreeformCurveCollection
-
Creates a
SpineCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX11.0.0
- createSpinePoint() - Method in interface nxopen.geometricutilities.AlongSpineBuilder
-
Creates a new spine point
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING")
.
- createSpinePoint() - Method in interface nxopen.routing.RouteSweptTwistBuilder
-
Creates a new spine point
License requirements: routing_harness ("Routing Harness")
.
- createSpinePointData(double, double, Section) - Method in interface nxopen.geometricutilities.SpinePointDataCollection
-
Creates a SpinePointData object.
- createSpinePointData(Expression, double, Section) - Method in interface nxopen.geometricutilities.SpinePointDataCollection
-
Creates a SpinePointData object with expression.
- createSpinningClone(KinematicComponent, boolean) - Method in interface nxopen.sim.KinematicConfigurator
-
Creates a copy of the given component and spins its assigned geometry around a spinning axis.
- createSpline(UFCurve.Spline) - Method in interface nxopen.uf.UFCurve
-
- createSpline(int, int, double[], double[]) - Method in interface nxopen.uf.UFModlGeneral
-
- createSpline(UFSo.UpdateOption, UFSo.SplineData) - Method in interface nxopen.uf.UFSo
-
- createSplineBeamBuilder(SplineBeam) - Method in interface nxopen.motion.SplineBeamCollection
-
Creates a
SplineBeamBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX12.0.0
- createSplineBeamPropertyBuilder(SplineBeamProperty) - Method in interface nxopen.motion.SplineBeamPropertyCollection
-
- CreateSplineData() - Constructor for class nxopen.uf.UFCurve.CreateSplineData
-
- CreateSplineData() - Constructor for class nxopen.uf.UFModlGeneral.CreateSplineData
-
- createSplineFeature(Tag) - Method in interface nxopen.uf.UFCurve
-
- createSplinePathBuilder(Curve) - Method in interface nxopen.routing.RouteManager
-
- createSplineThruPts(int, int, int, UFCurve.PtSlopeCrvatr[], double[], int) - Method in interface nxopen.uf.UFCurve
-
- createSplitBodyBuilder(SplitBody) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SplitBodyBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createSplitBodyBuilderUsingCollector(SplitBody) - Method in interface nxopen.features.FeatureCollection
-
- createSplitBuilder(Part, ControlPoint[]) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createSplitDuctBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a Split Duct builder.
- createSplitInsertBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates a
SplitInsertBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX12.0.0
- createSplitProfilePlateBuilder() - Method in interface nxopen.features.ShipCollection
-
- createSplitScreenLayoutAndNamedViews(String, String) - Method in interface nxopen.LayoutCollection
-
This method creates a layout with two modeling views.
- CreateSplitScreenLayoutAndNamedViewsData() - Constructor for class nxopen.LayoutCollection.CreateSplitScreenLayoutAndNamedViewsData
-
- createSplitSolidBuilder() - Method in interface nxopen.tooling.SplitSolidCollection
-
Creates split solid builder
License requirements: None.
- createSplitStandardPartBuilder(SplitStandardPart) - Method in interface nxopen.features.ShipCollection
-
Creates a
SplitStandardPartBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX9.0.0
- createSplitSubdivisionBodyBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSplitter(NXObject[], NXObject[]) - Method in interface nxopen.cam.MultiBladeSplittersGeometry
-
Create a new splitter
License requirements: cam_base ("CAM BASE")
.
- createSplitterCurve() - Method in interface nxopen.routing.Division
-
Creates splitting Curve.
- createSplittingCurves() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the create splitting curves
License requirements: None.
- createSpreadsheetData() - Method in interface nxopen.tooling.ToolingSession
-
- createSpring(UFMotion.SpringDamper) - Method in interface nxopen.uf.UFMotion
-
- createSpringbackCompensationBuilder(SpringbackCompensation) - Method in interface nxopen.die.DieCollection
-
- createSpringBuilder(Spring) - Method in interface nxopen.motion.SpringCollection
-
Return
SpringBuilder
object
License requirements: mechanisms ("MECHANISMS")
Created in NX6.0.0
- createSpringDamperBuilder(SpringDamper) - Method in interface nxopen.mechatronics.SpringDamperCollection
-
- createSpringEadBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Spring EAD block.
- createSpringEadBuilder(FEElement) - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Spring EAD block and initializes it with the input element if defined.
- createStage(View, boolean) - Method in interface nxopen.ViewCollection
-
Creates a
Stage
License requirements: None.
- createStandardBeamSectionBuilder(StandardBeamSection) - Method in interface nxopen.cae.BeamSectionCollection
-
Creates a standard section builder
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createStandardPartBuilder() - Method in interface nxopen.tooling.StandardPartCollection
-
Creates a StandardPart builder
License requirements: None.
- createStandardPartFrameworkBuilder(Component) - Method in interface nxopen.features.ShipCollection
-
Creates a
StandardPartFrameworkBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createStandardPartFrameworkBuilder(NXObject, boolean) - Method in interface nxopen.features.ShipCollection
-
Creates a
StandardPartFrameworkBuilder
License requirements: nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX8.5.0
- createStandardPartItem(StandardPartItemBuilder) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Creates a new StandardPartItemBuilder and intialize the builder with data from the reference builder.
- createStandardPartPositionBuilder() - Method in interface nxopen.tooling.StandardPartPositionCollection
-
Creates a StandardPartPosition builder
License requirements: None.
- createStandardSectionBuilder(StandardSection) - Method in interface nxopen.motion.BaseSectionCollection
-
- createStandardViewsBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
Creates a StandardViewsBuilder
License requirements: nx_layout ("NX Layout")
.
- createStartSymmetricModelingBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createStaticCurbBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createStaticCurbBuilder(StaticCurb) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
StaticCurbBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createStaticEventBuilder(DurabilityStaticEvent) - Method in interface nxopen.cae.DurabilityEventCollection
-
Creates the builder object of the durability static event.
- createStaticLoadExcitationBuilder(StaticLoadExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
Creates the builder object of
StaticLoadExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX6.0.0
- createSteelCollarPlateBuilder(SteelCollarPlate) - Method in interface nxopen.features.ShipCollection
-
- createSteelDistributionBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
- createSteelInsulationBoundary() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
- createSteelInsulationBuilder(SteelInsulation) - Method in interface nxopen.features.ShipCollection
-
- createSteelSupportBuilder(SteelSupport) - Method in interface nxopen.features.ShipCollection
-
Creates a
SteelSupportBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
- createSteelVentHolesBuilder(SteelVentHoles) - Method in interface nxopen.features.ShipCollection
-
Creates a
SteelVentHolesBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
- createSteinbichlerImporter() - Method in interface nxopen.ImportManager
-
Creates a Steinbichler importer object.
- createStep(int, String) - Method in interface nxopen.cae.SimSolution
-
Creates a step and add to the solution
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createStep(int, boolean, String) - Method in interface nxopen.cae.SimSolution
-
Creates a step, adds it to the solution and optionally makes it the Active Step.
- createStep(int, boolean, String, SimSolution.StepPosition, SimSolutionStep) - Method in interface nxopen.cae.SimSolution
-
Create a step at the specified position, add to the solution and optionally make it active
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createStep(Tag, Tag, int, double, double, String, Tag) - Method in interface nxopen.uf.UFAssem
-
- createStep203Creator() - Method in interface nxopen.DexManager
-
- createStep203Importer() - Method in interface nxopen.DexManager
-
Create the Step203Importer
License requirements: None.
- createStep214Creator() - Method in interface nxopen.DexManager
-
- createStep214Importer() - Method in interface nxopen.DexManager
-
Create the STEP214Importer
License requirements: None.
- createStep242Importer() - Method in interface nxopen.DexManager
-
Create the STEP242Importer
License requirements: None.
- createStepBuilder(Step) - Method in interface nxopen.features.AeroCollection
-
Creates a
StepBuilder
License requirements: nx_aero_design (" NX Aero Design")
Created in NX10.0.0
- createStepCreator() - Method in interface nxopen.DexManager
-
Create the StepCreator - This is used for File -- Save As -- STEP
License requirements: None.
- createStepManager(SimSolution) - Method in interface nxopen.cae.SimSimulation
-
Creates a
StepManager
for a solution
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX10.0.0
- createStepNx(Tag, String, Tag) - Method in interface nxopen.uf.UFSf
-
- createStepover(UFVariant, double[], double[]) - Method in interface nxopen.uf.UFDrpos
-
- createSteppedSxview(Tag, double, double[], double[], Tag, int, UFDraw.SxlineSxsegs[], double[]) - Method in interface nxopen.uf.UFDraw
-
- createStepSubNode(int, String, String, boolean, boolean) - Method in interface nxopen.blockstyler.Wizard
-
Create a sub-node for a step in the Task Navigator.
- createStiffenerBuilder(Stiffener) - Method in interface nxopen.features.ShipCollection
-
Creates a
StiffenerBuilder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.0
- createStiffenerSystemBuilder(StiffenerSystem) - Method in interface nxopen.features.ShipCollection
-
- createStlCreator() - Method in interface nxopen.DexManager
-
Create the STL Creator
License requirements: None.
- createSTLImportBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
Creates a
STLImportBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_1 ("basic freeform modeling")
Created in NX6.0.0
- createStlImporter() - Method in interface nxopen.ImportManager
-
Creates an STL importer object.
- createStock(StockData, Anchor, CrossSection, ISegment[]) - Method in interface nxopen.routing.FillerCollection
-
Creates a
Filler
stock object.
- createStock(StockData, Anchor, CrossSection, ISegment[]) - Method in interface nxopen.routing.StockCollection
-
- createStockBrowserBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
StockBrowserBuilder
which finds and filters stock
License requirements: routing_base ("Routing Basic")
Created in NX6.0.0
- createStockBuilder(Part, Component, NXObject[]) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createStockBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
- createStockColorBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
StockColorBuilder
which assigns color to the face of stocks
having rectangular cross sections
License requirements: routing_harness ("Routing Harness")
Created in NX7.5.0
- createStockData(CharacteristicList) - Method in interface nxopen.routing.StockDataCollection
-
Creates (or finds an existing
StockData
) object in the work
part that has the characteristics specified by the input list of characteristic values.
- createStockData() - Method in interface nxopen.routing.StockDataCollection
-
Creates a new stock data in the work part.
- createStockDataRefreshBuilder() - Method in interface nxopen.routing.RouteManager
-
- createStockOffsetPoint(Point, Direction, String, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a Routing "Stock Offset" point.
- createStockOffsetPointBuilder(NXObject) - Method in interface nxopen.routing.RouteManager
-
Creates a builder than can create or edit stock offset points.
- createStockOffsetPort(Component, Port) - Method in interface nxopen.routing.StockOffsetPortCollection
-
Creates a
StockOffsetPort
in the work part from the
stock offset port in the given part occurrence.
- createStockPartConverterBuilder() - Method in interface nxopen.routing.RouteManager
-
- createStocksizeBuilder() - Method in interface nxopen.tooling.StockSizeCollection
-
Creates a StockSize builder
License requirements: None.
- createStockStyleBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
Creates a
StockStyleBuilder
which assigns style to stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
Created in NX6.0.0
- createStockTransitionBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
- createStop(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createStrainGageAnalyzerBuilder() - Method in interface nxopen.cae.DurabilityManager
-
Creates a builder for a durability strain gage analysis.
- createStrainGageBuilder(StrainGage) - Method in interface nxopen.cae.responsesimulation.StrainGageCollection
-
Creates a strain gage buider
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createStrainGageEvaluationSettingBuilder(StrainGageEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates strain gage evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createStreamlineSeedSet(int, String, Post.StreamlineSeed[]) - Method in interface nxopen.cae.Post
-
Create a seed set that can be used to specify the start points for streamline extraction.
- createStrengthResultsEvaluationSettingBuilder(StrengthResultsEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates strength results evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createStressaxesBuilder(DurabilityAxisSearch) - Method in interface nxopen.cae.DurabilityAxisSearchCollection
-
Creates the builder object of durability stress axes.
- createStringAttributeListEntry(boolean, boolean, boolean, String, int, int, String, String) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
- createStringAttributeListEntry(boolean, boolean, boolean, boolean, String, int, int, String, String) - Method in interface nxopen.weld.CharacteristicsSelectionBuilder
-
Create a string attribute list entry and add it to the list.
- createStringCondition(Property, String, Condition.OperatorOption) - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createStripLayoutBuilder() - Method in interface nxopen.tooling.StripLayoutCollection
-
- createStripLayoutStationInformationBuilder() - Method in interface nxopen.tooling.StripLayoutCollection
-
- createStripperVentingBuilder(FeatureGroup) - Method in interface nxopen.tooling.ProgressiveDieManager
-
- createStudioImageCaptureBuilder() - Method in interface nxopen.ViewCollection
-
- createStudioSplineBuilder(StudioSpline) - Method in interface nxopen.features.FeatureCollection
-
- createStudioSplineBuilderEx(NXObject) - Method in interface nxopen.features.FeatureCollection
-
Creates a Studio Spline builder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createStudioSurfaceBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Studio Surface Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createStudioSurfaceBuilderEx(Feature) - Method in interface nxopen.features.FreeformSurfaceCollection
-
- createStudioXformBuilder(StudioXform) - Method in interface nxopen.features.FeatureCollection
-
- createStudioXformBuilderEx(StudioXform) - Method in interface nxopen.features.FeatureCollection
-
Creates a Features.StudioXformBuilderEx
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX7.0.0
- createStycorner(UFModl.StycornerData) - Method in interface nxopen.uf.UFModlFeatures
-
- createStyledBlendBuilder(StyledBlend) - Method in interface nxopen.features.FeatureCollection
-
Creates a
StyledBlendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
- createStyledCornerBuilder(StyledCorner) - Method in interface nxopen.features.FeatureCollection
-
Creates a
StyledCornerBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
- createStyledSweepBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
StyledSweepBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
Created in NX6.0.0
- createStylerDialog(String) - Method in interface nxopen.uistyler.Styler
-
Creates an NX (UIStyler generated) "bottom" dialog.
- createSubdivFace(Tag[], int, Tag, int, double[]) - Method in interface nxopen.uf.UFModeling
-
- createSubdivideFacetBodyBuilder() - Method in interface nxopen.facet.FacetedBodyCollection
-
- createSubdivideSegmentBuilder(NXObject, Point3d) - Method in interface nxopen.routing.RouteManager
-
Creates a
SubdivideSegmentBuilder
that can
subdivide a segment into multiple segments
License requirements: routing_base ("Routing Basic")
Created in NX5.0.0
- createSubdivisionBridgeFaceBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionConnectCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionDeleteCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionDeleteFaceBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionDeleteObjectBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionExtrudeCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionFillBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionLoftBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionMergeFaceBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionPrimitiveShapeBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionPrimitiveShapeBuilderEx() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionProjectCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionRevolveBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionSetContinuityBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionSetWeightBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionSewCageBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionSplitFaceBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionSubdivideFaceBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionSweepBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubdivisionTubeBuilder() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createSubFieldExpression(FieldVariable) - Method in interface nxopen.fields.FieldManager
-
- createSubInsertBuilder() - Method in interface nxopen.tooling.SubInsertCollection
-
Creates subinsert builder
License requirements: None.
- createSubnetBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
SubnetBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createSubsetBuilder(Subset) - Method in interface nxopen.assemblies.SubsetCollection
-
Creates an
SubsetBuilder
License requirements: nx_4gd_integration ("4th Generation Design")
Created in NX8.5.0
- createSubSystemsBuilder(SubSystems) - Method in interface nxopen.features.ShipCollection
-
- createSubtractFeature(Body, boolean, Body[], boolean, boolean) - Method in interface nxopen.features.FeatureCollection
-
Creates a subtract feature.
- CreateSubtractFeatureData() - Constructor for class nxopen.features.FeatureCollection.CreateSubtractFeatureData
-
- createSubtractGroup(String, CaeGroup, CaeGroup) - Method in interface nxopen.cae.CaeGroupCollection
-
Create a Subtraction of two Groups
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createSuperpositionEventBuilder(DurSpecialistSuperpositionEvent) - Method in interface nxopen.cae.DurSpecialistLoadProviderCollection
-
- createSupportBuilder() - Method in interface nxopen.mfg.am.Part
-
Create support builder object
License requirements: am_pb_mtls_sg_2 ("Advanced NX Additive Support Geometry") OR am_pb_mtls_sg_1 ("Basic NX Additive Support Geometry")
.
- createSupportCasting() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the value (true or false) to decide if support casting should be created
License requirements: None.
- createSupports() - Method in interface nxopen.mfg.am.Part
-
Create the supports for the part
License requirements: am_pb_mtls_sg_2 ("Advanced NX Additive Support Geometry") OR am_pb_mtls_sg_1 ("Basic NX Additive Support Geometry")
.
- createSuppressByExpressionBuilder() - Method in interface nxopen.ExpressionCollection
-
- createSuppressHoleBuilder() - Method in interface nxopen.cae.AbstractionManager
-
Creates a builder for Suppress Hole Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSuppressPmibuilder() - Method in interface nxopen.annotations.PmiManager
-
- createSurfaceCoatBuilder(MeshShellFromSolid) - Method in interface nxopen.cae.MeshManager
-
Creates a shell from solid (surface coat) builder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSurfaceCoatBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for the Surface Coat.
- createSurfaceContactMesh(Tag, Tag, UFVariant) - Method in interface nxopen.uf.UFSf
-
- createSurfaceContinuityAnalysisBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a surface continuity analysis builder
License requirements: gateway ("UG GATEWAY")
.
- createSurfaceContourBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a surface contour operation builder
License requirements: cam_base ("CAM BASE")
.
- createSurfaceCurveIntersection(Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFPoint
-
- createSurfaceData(Face) - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Create surface data for enlarged surface.
- createSurfaceFinishBuilder(SurfaceFinish) - Method in interface nxopen.annotations.PmiAttributeCollection
-
- createSurfaceFromPolygonFace(Part, CAEFace) - Method in interface nxopen.cae.CADModeling
-
CREATE cad surface from polygon face in part
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSurfaceIntersectionBuilder(DisplayableObject) - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Creates a surface intersection builder
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- createSurfaceRegions(Feature) - Method in interface nxopen.cam.CAMSetup
-
Creates a surface regions builder
License requirements: cam_base ("CAM BASE")
.
- createSurfaceUvdirectionBuilder() - Method in interface nxopen.BodyCollection
-
Creates a SurfaceUVDirectionBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- createSurfaceWeldBuilder(SurfaceWeld) - Method in interface nxopen.weld.WeldManager
-
Creates a
SurfaceWeldBuilder
License requirements: structure_weld ("STRUCTURE WELD")
Created in NX9.0.0
- createSurfFromCloud(int, double[][], double[][], double[][], int, int, int, int, int) - Method in interface nxopen.uf.UFModlFeatures
-
- CreateSurfFromCloudData() - Constructor for class nxopen.uf.UFModlFeatures.CreateSurfFromCloudData
-
- createSwapDiagonalBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for swap diagonal command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createSweep(UFModl.StringList, UFModl.StringList, UFModl.StringList, UFModl.MethodList, UFModl.MethodList, int, int, int, UFModl.FeatureSigns, double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createSweepAlongGuideBuilder(SweepAlongGuide) - Method in interface nxopen.features.FeatureCollection
-
- createSweepBetweenMeshBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a builder for Manual Hex Mesh.
- createSweptBuilder(Swept) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SweptBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createSweptHexMesh(Tag, Tag, boolean, double) - Method in interface nxopen.uf.UFSf
-
- createSweptVolumeBuilder(SweptVolume) - Method in interface nxopen.features.SweepFeatureCollection
-
Creates a
SweptVolumeBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- createSxviewFromDmv(Tag, Tag, UFDraw.SxlineType, double, double[], double[], int, UFDraw.SxlineSxsegs[], double[], boolean) - Method in interface nxopen.uf.UFDraw
-
- createSymbolAnnotationBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
SymbolAnnotationBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createSymbolAnnotationSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- createSymbolAuthoringBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
SymbolAuthoringBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createSymbolCatalogBuilder() - Method in interface nxopen.annotations.CustomSymbolCollection
-
Creates a symbol catalog dialog builder
License requirements: nx_layout ("NX Layout")
.
- createSymbolCurve(String, String) - Method in interface nxopen.weld.JointmarkBuilder
-
Create curve From PMI symbol
License requirements: ugweld ("UG WELD")
.
- createSymbolFileBuilder(SymbolFile) - Method in interface nxopen.annotations.SymbolFileCollection
-
Creates a drafting symbol file builder
License requirements: nx_layout ("NX Layout")
.
- createSymbolFont(String, double, double[], double[], int, Tag[]) - Method in interface nxopen.uf.UFDrf
-
- createSymbolTableBuilder(SymbolTable) - Method in interface nxopen.mechatronics.SymbolTableCollection
-
- createSymbThread(UFModl.SymbThreadData) - Method in interface nxopen.uf.UFModeling
-
- createSymbThread2(UFModl.SymbThreadData, boolean) - Method in interface nxopen.uf.UFModl
-
- createSymCline(UFDrf.Object, UFDrf.Object) - Method in interface nxopen.uf.UFDrf
-
- createSymmetricalCenterlineBuilder(SymmetricalCenterline) - Method in interface nxopen.annotations.CenterlineCollection
-
Creates the Symmetrical Centerline builder
License requirements: None.
- createSymmetricBuilder(Symmetric) - Method in interface nxopen.features.FeatureCollection
-
Creates a
SymmetricBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createSynchronizeContentBuilder() - Method in interface nxopen.issue.IssueBriefcase
-
- createSynchronizeDesignViewBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
SynchronizeDesignViewBuilder
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX8.5.0
- CreateSystem - Interface in nxopen.linedesigner
-
Represents a create system
To create or edit an instance of this class, use
CreateSystemBuilder
Created in NX9.0.0
- CreateSystemBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.CreateSystem
builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createCreateSystemBuilder
Created in NX9.0.0
- createSystemDevice() - Method in interface nxopen.routing.electrical.SystemDeviceCollection
-
- createSystemDevice(String) - Method in interface nxopen.routing.electrical.SystemDeviceCollection
-
- createSystemExpression(String) - Method in interface nxopen.ExpressionCollection
-
Creates a system expression.
- createSystemExpression(String, String) - Method in interface nxopen.ExpressionCollection
-
Creates a system expression of the specified type.
- createSystemExpressionFromReferenceString(String) - Method in interface nxopen.ExpressionCollection
-
Creates a system string expression from a reference string in Drafting Note format.
- createSystemExpressionWithUnits(String, Unit) - Method in interface nxopen.ExpressionCollection
-
Creates a system expression with units.
- createSystemRoot(SystemRoot.Type) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Creates a system root object in specified part.
- createTabFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Tab feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createTable() - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Creates the Table.
- createTableBuilder(Table) - Method in interface nxopen.diagramming.tables.TableCollection
-
- createTableEditorDefaultDataProvider(BasePart) - Method in interface nxopen.Session
-
Creates a data provider for a table editor.
- createTableEditSettingsBuilder(DisplayableObject[]) - Method in interface nxopen.drafting.SettingsManager
-
Creates a
TableEditSettingsBuilder
For multiple object settings, first create primary settings builder by passing all
selected 'n' objects.Then create 'n-1' secondary builders by passing single selected
object starting from second selected object.
- createTableFieldForModel(String, int, int, int, int, boolean, int[], boolean) - Method in interface nxopen.cae.ResultManager
-
Creates a table for the model.
- createTableFieldFromNodalForceReport(String, FieldVariable[], FieldVariable[], NodalForceReport) - Method in interface nxopen.cae.ResultManager
-
Creates a field from the lists of independent, dependent variables along with a given NodalForceReport.
- createTableFieldFromProbe(String, FieldVariable[], FieldVariable[], ResultProbe, boolean) - Method in interface nxopen.cae.ResultManager
-
Creates a field from the lists of independent, dependent variables along with a given Result Probe.
- createTableInPart(BasePart) - Method in interface nxopen.fields.Field
-
Create a new table field from this field (regardless of type).
- createTableInstance(Tag, Tag, double[]) - Method in interface nxopen.uf.UFGdt
-
- createTableOfFieldsForModel(String, int, int, int, int, boolean, int[], int[], boolean, double[], int[], int[], int[]) - Method in interface nxopen.cae.ResultManager
-
Creates a table of fields for the model.
- createTableSectionBuilder(TableSection) - Method in interface nxopen.annotations.TableSectionCollection
-
If null create a new table section, otherwise edit existing new table section
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- createTabPointDataBuilder() - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilder
-
The create tab point data builder
License requirements: cam_base ("CAM BASE")
.
- createTabularNote(UFDraw.TabnotParams) - Method in interface nxopen.uf.UFDraw
-
- createTagFormBuilder(TagFormObject) - Method in interface nxopen.mechatronics.TagFormCollection
-
- createTagTableBuilder(TagTableObject) - Method in interface nxopen.mechatronics.TagTableCollection
-
- createtangency - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingsData
-
Creates tangency at the point where the spline is subdivided by adding parallel extensions.
- createtangency - Variable in class nxopen.routing.SubdivideSegmentBuilder.SplineSettingValuesData
-
Creates tangency at the point where the spline is subdivided by adding parallel extensions.
- createTangencyGroupBuilder() - Method in interface nxopen.routing.AssignTangencyBuilder
-
- createTangentBuilder(Tangent) - Method in interface nxopen.features.FeatureCollection
-
Creates a
TangentBuilder
License requirements: features_modeling ("FEATURES MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING"), solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX6.0.0
- createTangentConstraint(Sketch.ConstraintGeometry, Sketch.ConstraintGeometryHelp, Sketch.ConstraintGeometry, Sketch.ConstraintGeometryHelp) - Method in interface nxopen.Sketch
-
Creates a tangent constraint.
- createTangentContinuousEdgeMethod(CAEEdge, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createTangentContinuousEdgeMethod(CAEEdge[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createTangentContinuousEdgeMethod(CAEEdge[], boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a tangent continuous edge method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createTangentFaceMethod(CAEFace, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createTangentFaceMethod(CAEFace[], double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createTangentFaceMethod(CAEFace[], boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
- createTangentFaceMethod(CAEFace[], boolean, boolean, double) - Method in interface nxopen.cae.SmartSelectionManager
-
Creates a tangent face method
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createTaperFromEdges(Tag, String, boolean, int, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createTaperFromFaces(Tag, Tag, String, boolean, int, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createTaperFromTangentFaces(Tag, String, boolean, int, Tag[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createTaperSplitLine(Tag, Tag, String, boolean, int, Tag[], double, double) - Method in interface nxopen.uf.UFModlFeatures
-
- createTargetCylArea(UFGdt.TargetCylArea) - Method in interface nxopen.uf.UFGdt
-
- createTargetDiaArea(UFGdt.TargetDiaArea) - Method in interface nxopen.uf.UFGdt
-
- createTargetLine(UFGdt.DatumTargetLine) - Method in interface nxopen.uf.UFGdt
-
- createTargetPoint(UFGdt.DatumTargetPoint) - Method in interface nxopen.uf.UFGdt
-
- createTargetPointBuilder(TargetPoint) - Method in interface nxopen.annotations.TargetPointCollection
-
Creates the TargetPointBuilder
License requirements: drafting ("DRAFTING")
.
- createTargetRectArea(UFGdt.TargetRectArea) - Method in interface nxopen.uf.UFGdt
-
- createTargetUdefArea(UFGdt.TargetUdefArea) - Method in interface nxopen.uf.UFGdt
-
- createTbsOptimizationSolutionResult(TBSOptimizationSolution) - Method in interface nxopen.cae.ResultManager
-
- createTeachmodeEngageSettingsBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Teachmode Engage Settings.
- createTeachmodeLinearMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Teachmode Linear Move.
- createTeachmodeProfileMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Teachmode Profile Move.
- createTeachmodeRetractSettingsBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Teachmode Retract Settings.
- createTeachmodeTurningBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a teachmode turning operation builder
License requirements: cam_base ("CAM BASE")
.
- createTeeJunctionBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
TeeJunctionBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX12.0.0
- createTempCsys(double[], Tag) - Method in interface nxopen.uf.UFCsys
-
- createTemplateBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
CreateTemplateBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- CreateTemplateBuilder - Interface in nxopen.ame
-
- createTemplateDefinitionBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
- CreateTemplateDefinitionBuilder - Interface in nxopen.ame
-
- createTemplateProject() - Method in interface nxopen.ame.CreateTemplateBuilder
-
Creates the template project
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createTemporaryLine(Point3d, Vector3d) - Method in interface nxopen.tooling.SectionLineCreationBuilder
-
Create temporary line
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createTerminalPort(Point3d, Vector3d, MultiPort, String) - Method in interface nxopen.routing.TerminalPortCollection
-
Creates a
TerminalPort
with no
rotation vector at an absolute location.
- createTerminalPort(Point3d, Vector3d, Point, MultiPort, String) - Method in interface nxopen.routing.TerminalPortCollection
-
Creates a
TerminalPort
with no
rotation vector at an existing point.
- createTerminalPort(Point3d, Vector3d, Axis, MultiPort, String) - Method in interface nxopen.routing.TerminalPortCollection
-
- createTerminalsOption() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the create terminals option.
- createText(Point2d, String) - Method in interface nxopen.markup.MarkupFileObjectCollection
-
Creates a
Text
License requirements: None.
- createText(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createTextBasedElementBuilder(TextBasedElement) - Method in interface nxopen.motion.TextBasedElementCollection
-
- createTextBuilder(Text) - Method in interface nxopen.features.FeatureCollection
-
Creates a
TextBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.1
- createThickenBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Thicken feature builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createThickenMeshBuilder() - Method in interface nxopen.cae.NodeElementManager
-
Creates a
ThickenMeshBuilder
License requirements: sc_acou_meshing (" SC Acoustic Meshing")
Created in NX11.0.0
- createThickenSheet(Tag, String, String, UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createThicknessBuilder(Mesh) - Method in interface nxopen.cae.NodeElementInfoManager
-
Creates a builder for node element info command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createThicknessDimensionBuilder(BaseConcentricCircleDimension) - Method in interface nxopen.annotations.DimensionCollection
-
- createThicknessGraphicObjects(Point3d, Vector3d, double, NXColor) - Method in interface nxopen.tooling.WallThicknessCheckerBuilder
-
Create graphic objects for the thickness results.
- createThicknessPlotContoursBuilder() - Method in interface nxopen.cae.NodeElementInfoManager
-
Creates a builder for plotting thickness contours
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createThreadedBossBuilder(NXObject[], double, double, NXObject, double, double, double, String, double, int, HoleBossGeom.FormTypes, String) - Method in interface nxopen.cam.HoleBossGeom
-
Create a new Thread Boss
License requirements: cam_base ("CAM BASE")
.
- createThreadedHoleBuilder(NXObject[], double, double, NXObject, double, double, double, String, String, double, int, HoleBossGeom.FormTypes, String, String, int) - Method in interface nxopen.cam.HoleBossGeom
-
Create a new Thread Hole
License requirements: cam_base ("CAM BASE")
.
- createThreadMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a Thread Milling operation builder
License requirements: cam_base ("CAM BASE")
.
- createThreadToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a thread builder
License requirements: cam_base ("CAM BASE")
.
- createThreadTurningBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a thread turning operation builder
License requirements: cam_base ("CAM BASE")
.
- createThreadWire(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createThreeBendCornerFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Three Bend Corner feature Builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createThreeJointCouplerBuilder(ThreeJointCoupler) - Method in interface nxopen.mechatronics.ThreeJointCouplerCollection
-
- createThroughCurveMeshBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createThroughCurvesBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
ThroughCurvesBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createThroughPoints(SmartObject.UpdateOption, Point[], boolean) - Method in interface nxopen.PolylineCollection
-
Create a polyline from points
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createThruCurves(UFModl.StringList, UFModl.StringList, int, int, double[], int, int, int, UFModl.FeatureSigns, double[], Tag[], int[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createTiaPortalProjectSettingsBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates an TiaPortalSettingsBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createTiaprojectItemBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
TiaProjectItemBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createTireBuilder(Tire) - Method in interface nxopen.motion.TireCollection
-
Return
TireBuilder
object
License requirements: mechanisms ("MECHANISMS")
Created in NX11.0.0
- createTireEnvelopeBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createTireEnvelopeBuilder(TireEnvelope) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
TireEnvelopeBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createTireEnvelopeFeature() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify whether or not the tire envelope feature will be created.
- createTirePropertyBasicBuilder(TirePropertyBasic) - Method in interface nxopen.motion.TirePropertyBasicCollection
-
- createTirePropertyCdBuilder(TirePropertyCd) - Method in interface nxopen.motion.TirePropertyCdCollection
-
- createTirePropertyFtBuilder(TirePropertyFt) - Method in interface nxopen.motion.TirePropertyFtCollection
-
- createTirePropertyMotorcycleBuilder(TirePropertyMotorcycle) - Method in interface nxopen.motion.TirePropertyMotorcycleCollection
-
- createTirePropertyNonInertialBuilder(TirePropertyNonInertial) - Method in interface nxopen.motion.TirePropertyNonInertialCollection
-
- createTirePropertyTnoBuilder(TirePropertyTno) - Method in interface nxopen.motion.TirePropertyTnoCollection
-
- createTool(InspectionGroup, String, String, NCGroupCollection.UseDefaultName, String) - Method in interface nxopen.cam.InspectionGroupCollection
-
Create a tool group of the specified type and subtype under the parent group.
- createTool(NCGroup, String, String, NCGroupCollection.UseDefaultName, String) - Method in interface nxopen.cam.NCGroupCollection
-
Create a tool group of the specified type and subtype under the parent group.
- createToolbar(String, int) - Method in interface nxopen.uf.UFUi
-
- createToolBaseComponentBuilder(KinematicComponent) - Method in interface nxopen.sim.KinematicComponentCollection
-
Creates a bulder for tool base component.
- createToolChange(UFVariant, UFPath.ToolChange, String) - Method in interface nxopen.uf.UFPath
-
- createToolChangePositionBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Creates a tool change position move.
- createToolingBox() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Creates the tooling box.
- createToolingBoxBuilder(ToolingBox) - Method in interface nxopen.features.ToolingFeatureCollection
-
Creates a
ToolingBoxBuilder
License requirements: ug_mold_design ("UG MOLD") OR nx_electrode_wizard ("NX Electrode Wizard") OR prog_die_wizard ("UG/Progressive Die Wizard") OR studio_free_form ("STUDIO FREE FORM") OR features_modeling ("FEATURES MODELING") OR solid_modeling ("SOLIDS MODELING")
Created in NX10.0.0
- createToolLengthComp(UFVariant, int, String) - Method in interface nxopen.uf.UFPath
-
- createToolLibEntry - Variable in class nxopen.uf.UFCam.Preferences
-
- createToolPathDivideBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Create Tool Path Divide builder
License requirements: cam_base ("CAM BASE")
.
- createToolPathEditorBuilder() - Method in interface nxopen.cam.Operation
-
Create Tool Path Editor Move builder
License requirements: cam_base ("CAM BASE")
.
- createToolPathSplitBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Create Tool Path Split by Holder builder
License requirements: cam_base ("CAM BASE")
.
- createToolPathSplitItemBuilder() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
The method to create the SplitToolPathItemBuilder
License requirements: cam_base ("CAM BASE")
.
- createToolPathTiltBuilder(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Create Tool Path Tilt builder
License requirements: cam_base ("CAM BASE")
.
- createToolPreselect(UFVariant, int, String) - Method in interface nxopen.uf.UFPath
-
- createTooltipCsys() - Method in interface nxopen.sim.KinematicJunctionBuilder
-
Create the tooltip CSYS
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- createToolTrackingPointBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create Tracking Point Move.
- createTopBubblesToggle() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
Returns the status to create top bubbles in column grid
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- createTopologyNode(Sheet, AMEEngObject, double, double) - Method in interface nxopen.ame.DiagramManager
-
Create Topology Diagram Node
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createTopologyOptimizationSolutionBuilder(TBSTopologyOptimizationSolution) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
- createTopologyRestrictAreaBuilder(TBSTopologyRestrictArea) - Method in interface nxopen.cae.optimization.TBSOptimizationManager
-
Create the builder of
TBSRestrictAreaBuilder
License requirements: cae_opt_topo ("NX Topology Optimization")
Created in NX8.0.0
- createTopSeam(Tag, Tag, int, Tag[], boolean, UFDrf.WeldSymbols) - Method in interface nxopen.uf.UFDrf
-
- createTrace(UFMotion.Trace) - Method in interface nxopen.uf.UFMotion
-
- createTraceBuilder(PackagingTrace) - Method in interface nxopen.motion.PackagingCollection
-
- createTraceLines() - Method in interface nxopen.features.MoveObjectBuilder
-
Returns the create trace lines flag
License requirements: None.
- createTraceLinesBuilder(TraceLines) - Method in interface nxopen.features.ShipCollection
-
Creates a
TraceLinesBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX7.5.0
- createTraceLink(SystemObject) - Method in interface nxopen.mechatronics.SystemObject
-
Creates the trace link for system objects.
- createTraceLinks(String[], String[], String[]) - Method in interface nxopen.pdm.RequirementUtils
-
Creates Trace Links from
Requirement
s to
Part
s
For the input requirement_item_numbers:
In case of Default Domain: it is Teamcenter item ID.
- createTracerBuilder(Tracer) - Method in interface nxopen.mechatronics.TracerCollection
-
- createTrackChanges() - Method in interface nxopen.DrawingCompareManager
-
Create track changes data for drafting objects in the drawing part
License requirements: None.
- createTrackingDataForNXObject(TaggedObject) - Method in interface nxopen.features.CustomFeatureCreateFeatureGeometryEvent
-
Creates the tracking data for an NX object
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createTrackingDataForNXObject(TaggedObject) - Method in interface nxopen.features.CustomFeatureModifyFeatureGeometryEvent
-
Creates the tracking data for an NX object
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createTrackingDataForParasolidEntity(int) - Method in interface nxopen.features.CustomFeatureCreateFeatureGeometryEvent
-
Creates the tracking data for a Parasolid face or edge id
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createTrackingPoint(Tag, UFCutter.TrackingPointData) - Method in interface nxopen.uf.UFCutter
-
- createTrackingPointChange(UFVariant, UFPath.TrackingPointChange) - Method in interface nxopen.uf.UFPath
-
- createTransferFileDataBuilder(Part, ImportNode) - Method in interface nxopen.ame.AMEManager
-
Creates a
TransferFileDataBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createTransformBlockBuilder(Part) - Method in interface nxopen.mechanicalrouting.BuilderFactory
-
- createTransformBuilder(Transform) - Method in interface nxopen.weld.WeldManager
-
- createTransformCageData() - Method in interface nxopen.features.subdivision.SubdivisionBodyCollection
-
- createTransformPathBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
FIXME
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- createTransFrameBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Create a TransFrameBuilder.
- createTransFrameListItem() - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
Create a list containing all required info to generate transverse frame.
- createTransientEventBuilder(DurabilityTransientEvent) - Method in interface nxopen.cae.DurabilityEventCollection
-
Creates the builder object of the durability transient event.
- createTransientResultsReductionBuilder() - Method in interface nxopen.cae.ResultManager
-
Creates a transient results reduction builder.
- CreateTransitionBuilder - Interface in nxopen.facet
-
- createTransitionBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
TransitionBuilder
License requirements: nx_ship_basic ("Ship Basic Design")
Created in NX8.5.0
- CreateTransitionBuilder.Types - Class in nxopen.facet
-
the transition type.
- createTransitionCurveBuilder() - Method in interface nxopen.features.BlendCornerBuilder
-
Create a transition curve data builder object.
- createTranslationalDdamExcitationBuilder(DDAMExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
Creates the builder object of
DDAMExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX5.0.0
- createTranslationalNodalFunctionExcitationBuilder(TranslationalNodalFunctionExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
- createTranslationMatrix(double[]) - Method in interface nxopen.uf.UFTrns
-
- createTransmissibilityEvaluationSettingBuilder(TransmissibilityEvaluationSetting) - Method in interface nxopen.cae.responsesimulation.EvaluationSettingManager
-
Creates transmissibility evaluation setting object
License requirements: nx_response_anlys ("NX Response Analysis")
.
- createTransmitterEntryBuilder(TransmitterEntry) - Method in interface nxopen.mechatronics.TransmitterEntryCollection
-
- createTransmitterExitBuilder(TransmitterExit) - Method in interface nxopen.mechatronics.TransmitterExitCollection
-
- createTransportSurfaceBuilder(TransportSurface) - Method in interface nxopen.mechatronics.TransportSurfaceCollection
-
- createTransverseBulkheadBuilder(TransverseBulkhead) - Method in interface nxopen.features.ShipCollection
-
- createTrimAndExtendBuilder(TrimAndExtend) - Method in interface nxopen.features.TrimFeatureCollection
-
Creates a
TrimAndExtendBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX9.0.0
- createTrimBody2Builder(TrimBody2) - Method in interface nxopen.features.FeatureCollection
-
Creates a
TrimBody2Builder
for Trim Body
feature
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.0
- createTrimBodyBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a trim body builder object.
- createTrimCornerBuilder(Feature) - Method in interface nxopen.features.BaseFeatureCollection
-
Creates a
TrimCornerBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createTrimCurve2FeatureBuilder(TrimCurve2) - Method in interface nxopen.features.FeatureCollection
-
Creates a
TrimCurve2Builder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX11.0.1
- createTrimCurveBoundingObjectBuilder() - Method in interface nxopen.features.TrimCurve2Builder
-
- createTrimCurveBuilder(TrimCurve) - Method in interface nxopen.features.FeatureCollection
-
Creates a
TrimCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX5.0.0
- createTrimCurveBuilder(Spline) - Method in interface nxopen.features.FeatureCollection
-
Creates a
TrimCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX7.5.0
- createTrimExtendBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
TrimExtendBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX5.0.0
- createTrimLineDevelopmentBuilder(Feature) - Method in interface nxopen.die.DieCollection
-
- createTrimmedTube(Tag[], int, UFModl.SweepTrimObject, String[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createTrimmedTube1(Tag[], int, UFModl.SweepTrimObject, String[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- CreateTrimmedTube1Data() - Constructor for class nxopen.uf.UFModl.CreateTrimmedTube1Data
-
- CreateTrimmedTubeData() - Constructor for class nxopen.uf.UFModl.CreateTrimmedTubeData
-
- createTrimmingMarks() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the flag that indicate if trimming marks are created.
- createTrimmingMarks() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the flag indicates to create trimming marks or not.
- createTrimmingMarks() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- createTrimmingMarks() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the create trimming marks
License requirements: None.
- createTrimMoldComponentsBuilder() - Method in interface nxopen.tooling.TrimMoldComponentsCollection
-
Creates a TrimMoldComponents builder
License requirements: None.
- createTrimRegionBuilder() - Method in interface nxopen.tooling.TrimRegionCollection
-
Creates a Trim Region builder
License requirements: None.
- createTrimsheetBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
TrimSheetBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createTrimSolidBuilder() - Method in interface nxopen.tooling.TrimSolidCollection
-
Creates a Trim Solid builder
License requirements: None.
- createTrueShadingBuilder(TrueShading) - Method in interface nxopen.display.TrueShadingCollection
-
- createTrueStudioBuilder(TrueStudio) - Method in interface nxopen.display.TrueStudioCollection
-
- createTrueTaperFromEdges(Tag, String, boolean, int, Tag[], double, double) - Method in interface nxopen.uf.UFModlFeatures
-
- createTSlot(double[], double[], double[], String, String, String, String, String, int, int, int) - Method in interface nxopen.uf.UFModl
-
- createTToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a t tool builder
License requirements: cam_base ("CAM BASE")
.
- createTube(Tag[], String[], UFModl.FeatureSigns) - Method in interface nxopen.uf.UFModl
-
- createTube1(Tag[], String[], UFModl.FeatureSigns, Tag) - Method in interface nxopen.uf.UFModl
-
- createTubeBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
TubeBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createTurnAvoidanceGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a turning avoidance geometry builder
License requirements: cam_base ("CAM BASE")
.
- createTurnBoundaryGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a turning boundary geometry builder
License requirements: cam_base ("CAM BASE")
.
- createTurnFeatureGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a turning feature geometry builder
License requirements: cam_base ("CAM BASE")
.
- createTurnGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a turning geometry builder
License requirements: cam_base ("CAM BASE")
.
- createTurnMethodBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a turn method builder
License requirements: cam_base ("CAM BASE")
.
- createTurnMoveToPointBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Turn Linear Move.
- createTurnOrientGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a turn orient geometry builder
License requirements: cam_base ("CAM BASE")
.
- createTurnPartProbingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a turn part probing operation builder
License requirements: cam_base ("CAM BASE")
.
- createTurnProbeClearanceBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Turn Probe Clearance Move.
- createTurnProbeInspectPointMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Turn Probe Inspect Point Move.
- createTurnToolBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a turn builder
License requirements: cam_base ("CAM BASE")
.
- createTurnToolProbingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a turn tool probing operation builder
License requirements: cam_base ("CAM BASE")
.
- createTurnTrackingPoint(Tag, UFCutter.TurnTrackingPointData) - Method in interface nxopen.uf.UFCutter
-
- createTwoExpressionsCollectorSet(ScCollector, String, String, String, int) - Method in interface nxopen.Part
-
Creates an TwoExpressionCollectorSet item that contains
a
ScCollector
collection
and two corresponding expressions
License requirements: None.
- createTwoExpressionsSectionSet(Section, String, String, String, int) - Method in interface nxopen.Part
-
Creates an TwoExpressionSectionSet item that contains
a
Section
section
and two corresponding expressions
License requirements: None.
- createTwoGroups() - Method in interface nxopen.cae.GroupByBoundaryBuilder
-
Returns the first selection group
License requirements: None.
- createTypeAttribute() - Method in interface nxopen.ame.CreateProductBuilder
-
Creates a new type attribute object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createTypedSequence(String, int, Tag) - Method in interface nxopen.uf.UFAssem
-
- createTypeMapping() - Method in interface nxopen.ame.TypeMappingListBuilder
-
Create a new type mapping
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createTypeMappingListBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
TypeMappingListBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createUde() - Method in interface nxopen.cam.UdeSet
-
Sets the creator for Ude
License requirements: cam_base ("CAM BASE")
.
- createUdeByName(String) - Method in interface nxopen.cam.UdeSet
-
The function to add Ude
License requirements: cam_base ("CAM BASE")
.
- createUdeMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a UDE Move.
- createUGroove(double[], double[], String, String, String, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- createUgs2dMesh(UFSf.Ugs2dMeshParms, int, Tag[]) - Method in interface nxopen.uf.UFSf
-
- createUgs2dMeshWithHdpts(UFSf.Ugs2dMeshParms, int, Tag[], int, Tag[]) - Method in interface nxopen.uf.UFSf
-
- createUgs2dMeshWtAbstractionControl(UFSf.Ugs2dMeshParms, UFSf.UgsMeshAbstractionParams, int, Tag[]) - Method in interface nxopen.uf.UFSf
-
- createUgsTetMesh(UFSf.UgsTetMeshParms, int, Tag[]) - Method in interface nxopen.uf.UFSf
-
- createUgsTetMeshWtAbstractionControl(UFSf.UgsTetMeshParms, UFSf.UgsMeshAbstractionParams, int, Tag[], int) - Method in interface nxopen.uf.UFSf
-
- createUnbendFeatureBuilder(Feature) - Method in interface nxopen.features.sheetmetal.SheetmetalManager
-
Create a NXSM Unbend feature builder
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- createUncutRegionsBuilder() - Method in interface nxopen.die.DieCollection
-
- createUndersizeBuilder() - Method in interface nxopen.tooling.UndersizeCollection
-
Creates undersize object
License requirements: None.
- createUnfoldedMinRecBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a Features.ShipDesign.UnfoldedMinRecBuilder.
- createUnfoldedSxview(Tag, double, double[], double[], Tag, int, UFDraw.SxlineSxsegs[], double[]) - Method in interface nxopen.uf.UFDraw
-
- createUnfoldingSimulationBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
- createUnformBuilder(Feature) - Method in interface nxopen.features.sheetmetal.AeroSheetmetalManager
-
Create unform builder
License requirements: aero_sheet_metal ("Aerospace Sheet Metal") OR adv_sheet_metal_dsgn ("ADVANCED SHEET METAL DESIGN")
.
- createUniformScale(Tag, int, String) - Method in interface nxopen.uf.UFModeling
-
- createUniformScaledConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a uniform scale constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createUnifyPathBuilder(NXObject[]) - Method in interface nxopen.routing.RouteManager
-
- createUnionDofset(String, CaeDOFSet[]) - Method in interface nxopen.cae.CaeDOFSetCollection
-
Create a Union of DOFSets
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createUnionGroup(String, CaeGroup[]) - Method in interface nxopen.cae.CaeGroupCollection
-
Create a Union of Groups
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- createUniteFeature(Body, boolean, Body[], boolean, boolean) - Method in interface nxopen.features.FeatureCollection
-
Creates a unite feature.
- CreateUniteFeatureData() - Constructor for class nxopen.features.FeatureCollection.CreateUniteFeatureData
-
- createUnitlessUnit(String) - Method in interface nxopen.cae.ftk.DataManager
-
Creates unitless unit
License requirements: None.
- createUniversalUnformBuilder(UniversalUnform) - Method in interface nxopen.features.ToolingCollection
-
Creates a
UniversalUnformBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
Created in NX8.5.0
- createUnloadLineDesignerBuilder(Part) - Method in interface nxopen.ame.AMEManager
-
Creates a
UnloadLineDesignerBuilder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- createUnnestModuleBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createUnsewBuilder(Unsew) - Method in interface nxopen.features.FeatureCollection
-
Creates a
UnsewBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createUnStitchEdgeBuilder() - Method in interface nxopen.cae.FemPart
-
Creates a
UnStitchEdgeBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX6.0.0
- createUntrimBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
UntrimBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createUntrimmedMargins() - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
Returns the flag indicates to create untrimmed margins or not.
- createUntrimmedMargins() - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
Returns the create untrimmed margins
License requirements: None.
- createUnusedFileManagementBuilder() - Method in interface nxopen.tooling.UnusedFileManagementCollection
-
Creates Unused File Management builder.
- createUpdateDesignElementPositionBuilder(Part) - Method in interface nxopen.CollaborativeContentManager
-
- createUpdateDivide(ShipPreparationInfo) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Creates or updates the divide feature.
- createUpdateFormboardBuilder() - Method in interface nxopen.formboard.FormboardManager
-
Creates a
UpdateFormboardBuilder
that compares and
updates formboard geometry to match a modified master 3D harness.
- createUpdateShipLibraryBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
- createUpdateStructureBuilder() - Method in interface nxopen.assemblies.AssemblyManager
-
- createUpdateViewsBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
Creates the Update Views Builder
License requirements: drafting ("DRAFTING")
.
- createUrlBusinessModifier(String) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- createUrlBusinessModifierBuilder(UrlBusinessModifier) - Method in interface nxopen.annotations.BusinessModifierCollection
-
- createUserConstants(AMEBaseNode) - Method in interface nxopen.ame.AMEManager
-
Create plc user constants under provided node
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- createUserDefinedDieInsert() - Method in interface nxopen.tooling.DieInsertBuilder
-
Create user defined die insert or backing insert for selected scraps when creating die insert by user defined type
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createUserDefinedDieInsert() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Create user defined die insert or backing insert for selected scraps.
- createUserDefinedInsert(String) - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Creates user defined insert.
- createUserDefinedInsertDatumPlane() - Method in interface nxopen.tooling.DieInsertBuilder
-
Create datum plane for user defined die or backing insert outline.
- createUserDefinedInsertDatumPlane() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Create datum plane for user defined die or backing insert outline.
- createUserDefinedMotionBuilder() - Method in interface nxopen.tooling.ProgressiveDieManager
-
Creates a
UserDefinedMotionBuilder
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") OR ug_mold_design ("UG MOLD")
Created in NX11.0.0
- createUserDefinedMoveBuilder(Move, String) - Method in interface nxopen.cam.MoveCollection
-
Create User Defined Move.
- createUserDefinedObject(UserDefinedClass) - Method in interface nxopen.userdefinedobjects.UserDefinedObjectManager
-
- createUserDefinedObjectClass(String, String) - Method in interface nxopen.userdefinedobjects.UserDefinedClassManager
-
- createUserDefinedObjectFeatureBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a UserDefinedObjectFeature builder
License requirements: None.
- createUserDefinedSection() - Method in interface nxopen.die.AddendumSectionUserDefinedBuilder
-
- createUserDefinedSectionBuilder(UserDefinedSection) - Method in interface nxopen.motion.BaseSectionCollection
-
- createUserDefinedSolidBeamSectionBuilder(UserDefinedSolidBeamSection) - Method in interface nxopen.cae.BeamSectionCollection
-
Creates a user-defined solid section builder.
- createUserDefinedWeldBuilder(Feature) - Method in interface nxopen.weld.WeldManager
-
- createUserdefMidsrf(UFSf.MidsrfUserParms) - Method in interface nxopen.uf.UFSf
-
- createUserGroupFromEntityLabels(int, CaeGroupCollection.EntityType, int[]) - Method in interface nxopen.cae.Post
-
Create a User Group using element or node labels.
- createUserGroupFromEntityLabels(int, Result, CaeGroupCollection.EntityType, int[]) - Method in interface nxopen.cae.Post
-
Create a User Group using element or node labels.
- createUserItem(UserInput.Type) - Method in interface nxopen.report.Report
-
Creates a user item and adds it to the report.
- createUserMotionBuilder(Part, UserMotion) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
UserMotionBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createUserMotionListBuilder(Part) - Method in interface nxopen.presslinesimulation.ApplicationManager
-
Creates a
UserMotionListBuilder
License requirements: nx_pls_die_checker (" NX Press Die Checker")
Created in NX12.0.0
- createUsertool(int, String, boolean) - Method in interface nxopen.uf.UFUi
-
- createUSlot(double[], double[], double[], String, String, String, String, Tag, Tag, Tag) - Method in interface nxopen.uf.UFModl
-
- createValidateModelBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a
ValidateModelBuilder
License requirements: nx_ship_basic ("Ship Basic Design")
Created in NX11.0.0
- createValidator(String) - Method in interface nxopen.validate.ValidationManager
-
Creates a validator.
- createValidCheckBuilder() - Method in interface nxopen.tooling.ValidCheckCollection
-
Creates a
ValidCheckBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createValidPointsOnPaths(Point3d[]) - Method in interface nxopen.routing.ManualRouteBuilder
-
This function will get all the paths stored in
ManualRouteBuilder
and
will create point for any location which lies on any of the paths.
- CreateValidPointsOnPathsData() - Constructor for class nxopen.routing.ManualRouteBuilder.CreateValidPointsOnPathsData
-
- createVariableHollow(double, String, int, Tag[], int, Tag[], int, Tag[], String[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createVariableOffset(Tag, String[], double[]) - Method in interface nxopen.uf.UFModlFeatures
-
- createVariableOffsetBuilder(VariableOffset) - Method in interface nxopen.features.FeatureCollection
-
Creates a
VariableOffsetBuilder
License requirements: studio_free_form ("STUDIO FREE FORM")
Created in NX8.0.0
- createVariableTaperFromEdges(Tag, String, boolean, int, Tag[], int, double[], String[], double, double) - Method in interface nxopen.uf.UFModlFeatures
-
- createVarOffsetFaceBuilder(VarOffsetFace) - Method in interface nxopen.features.FeatureCollection
-
Creates a
VarOffsetFaceBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX11.0.0
- createVarsweepBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Varsweep feature builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createVazlMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a planar milling vazl operation builder
License requirements: cam_base ("CAM BASE")
.
- createVectorDistanceMoveBuilder(Move) - Method in interface nxopen.cam.MoveCollection
-
Create a Vector Distance Move.
- createVectorFieldWrapperWithExpressions(Expression[]) - Method in interface nxopen.fields.FieldManager
-
Create a vector field wrapper backed by three scalar expressions
License requirements: None.
- createVectorFieldWrapperWithField(Field, double[]) - Method in interface nxopen.fields.FieldManager
-
Create a vector field wrapper backed up by a scaled vector field
License requirements: None.
- createVectorForceBuilder(VectorForce) - Method in interface nxopen.motion.VectorForceCollection
-
Creates a
JointDriverBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
- createVectorForceTorque(UFMotion.VectorForceTorque) - Method in interface nxopen.uf.UFMotion
-
- createVectorTorqueBuilder(VectorTorque) - Method in interface nxopen.motion.VectorTorqueCollection
-
Creates a
JointDriverBuilder
License requirements: mechanisms ("MECHANISMS")
Created in NX5.0.0
- createVehicleCoordinateSystemBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createVehicleCoordinateSystemBuilder(VehicleCoordinateSystem) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
VehicleCoordinateSystemBuilder
License requirements: nx_general_packaging ("NX General Packaging") OR ug_body_design ("Body Design") OR nx_posture ("NX Jack Posture Prediction")
Created in NX9.0.0
- createVelocityImpactExcitationBuilder(VelocityImpactExcitation) - Method in interface nxopen.cae.responsesimulation.ExcitationCollection
-
Creates the builder object of
VelocityImpactExcitation
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX6.0.0
- createVelocitySensorBuilder(VelocitySensor) - Method in interface nxopen.mechatronics.VelocitySensorCollection
-
- createVentHolesMarkingBuilder(VentHolesMarking) - Method in interface nxopen.features.ShipCollection
-
Creates a
VentHolesMarkingBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_mfg_prep ("Ship Manufacturing")
Created in NX5.3.0
- createVentilationHoles2Builder(VentilationHoles2) - Method in interface nxopen.features.ShipCollection
-
- createVerificationSolution() - Method in interface nxopen.cae.SmoothOptResultsBuilder
-
Create verification solution
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createVerifyPenetrationBuilder() - Method in interface nxopen.features.shipdesign.PenetrationRequestCollection
-
Creates a
VerifyPenetrationBuilder
License requirements: nx_penetration_mgmt ("Penetration Management")
Created in NX8.5.0
- createVerticalBaselineDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
-
Creates a vertical baseline dimension.
- createVerticalBaselineDimension(UFDrf.Object[], int, double[]) - Method in interface nxopen.uf.UFDrf
-
- createVerticalChainDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionSetCollection
-
Creates a vertical chain dimension.
- createVerticalChainDimension(UFDrf.Object[], int, double[]) - Method in interface nxopen.uf.UFDrf
-
- createVerticalConstraint(Sketch.ConstraintGeometry) - Method in interface nxopen.Sketch
-
Creates a vertical constraint
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.
- createVerticalDim(UFDrf.Object, UFDrf.Object, UFDrf.Text, double[]) - Method in interface nxopen.uf.UFDrf
-
- createVerticalDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a vertical dimension
License requirements: drafting ("DRAFTING")
.
- createVerticalMargin(OrdinateOriginDimension, Associativity, double) - Method in interface nxopen.annotations.OrdinateMarginCollection
-
Creates a vertical ordinate margin object
License requirements: geometric_tol ("GDT") OR drafting ("DRAFTING")
.
- createVerticalOrdinateAutoDimension(DimensionData, Point3d, boolean, boolean) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a vertical ordinate automatic dimension
License requirements: drafting ("DRAFTING")
.
- createVerticalOrdinateDimension(DimensionData, Point3d) - Method in interface nxopen.annotations.DimensionCollection
-
Creates a vertical ordinate dimension
License requirements: drafting ("DRAFTING")
.
- createView(String, double) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Create view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createViewAlignmentBuilder() - Method in interface nxopen.drawings.ViewAlignmentCollection
-
- createViewCreationWizardBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
- createViewDrapingResultsBuilder(LaminateGlobalLayup, LaminatePly) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Creates a
FlatPatternsBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX6.0.0
- createViewIndependent() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the flag indicating whether the PMI would be created view independent
License requirements: None.
- createViewLabel(Tag, UFDraw.ViewLabelParms) - Method in interface nxopen.uf.UFDraw
-
- createViewLaminateBuilder(Laminate, int) - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Creates a
ViewLaminateBuilder
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
Created in NX6.0.0
- createViewportSynchronizationOptions() - Method in interface nxopen.cae.PostScenarioManager
-
Creates viewport synchronization options.
- createViewProjectionBuilder() - Method in interface nxopen.drawings.DraftingViewCollection
-
- createViewSectionPreference() - Method in interface nxopen.preferences.SessionPreferences
-
Create a
ViewSection
object
License requirements: None.
- createViewSet(String, Tag, UFView.StandardOrientation, int, UFView.StandardOrientation[]) - Method in interface nxopen.uf.UFView
-
- createViewToShowComponents(String) - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Create view to show components
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- createViolation(String, String, NXObject[]) - Method in interface nxopen.routing.DesignRule
-
- createViolationForReason(String, CustomManager.DesignRuleReason, String, String, NXObject[]) - Method in interface nxopen.routing.CustomManager
-
Creates a new violation for a design rule reason.
- createVirtualAxisBuilder(VirtualAxis) - Method in interface nxopen.mechatronics.VirtualAxisCollection
-
- createVirtualBlendCurve(SmartObject.UpdateOption, IParameterizedSurface, double) - Method in interface nxopen.CurveCollection
-
- createVirtualBlendEdgeBuilder() - Method in interface nxopen.features.FeatureCollection
-
- createVirtualCenterlineCurve(SmartObject.UpdateOption, IParameterizedSurface, double) - Method in interface nxopen.CurveCollection
-
- createVirtualCurveBuilder(VirtualCurve) - Method in interface nxopen.features.FeatureCollection
-
Creates a
VirtualCurveBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX7.5.0
- createVirtualIntersectionPoint(IBaseCurve, IBaseCurve, Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.PointCollection
-
Creates a
Point
at the virtual intersection of two linear Edges or Curves.
- createVirtuallabImporter() - Method in interface nxopen.DexManager
-
Create the Virtuallab Importer
License requirements: None.
- createVisionPlaneBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createVisionPlaneBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createVisionPlaneBuilder(VisionPlane) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
VisionPlaneBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createVisualReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- createVisualReportBuilder(VisualReport) - Method in interface nxopen.visualreporting.VisualReportManager
-
- createVolumeBased25dMillingOperationBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a volume based 25D milling operation builder
License requirements: cam_base ("CAM BASE")
.
- createVrmlFile(String, double, int) - Method in interface nxopen.uf.UFStd
-
- createVrmlImporter() - Method in interface nxopen.ImportManager
-
Creates a VRML importer object.
- createWall(View, Stage.WallType) - Method in interface nxopen.ViewCollection
-
Creates a
Wall
License requirements: None.
- createWatertightFittingsBuilder() - Method in interface nxopen.routing.RouteManager
-
- createWaveDatumBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Wavedatum Builder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- createWaveInterfaceLinkerBuilder(Feature) - Method in interface nxopen.features.BaseFeatureCollection
-
- createWaveLinkBuilder(Feature) - Method in interface nxopen.features.BaseFeatureCollection
-
Creates a
WaveLinkBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createWavelinkRepository() - Method in interface nxopen.Part
-
Create the link repository to handle interpart selection
License requirements: None.
- createWavePointBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
WavePointBuilder
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
Created in NX5.0.0
- createWaveRoutingBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a
WaveRoutingBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX5.0.0
- createWaveSketchBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
Creates a Wavesketch Builder
License requirements: solid_modeling ("SOLIDS MODELING")
.
- createWedmBasedGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wire edm based geometry builder
License requirements: cam_base ("CAM BASE")
.
- createWedmCornerControlBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wedm_corner_control builder
License requirements: cam_base ("CAM BASE")
.
- createWedmCuttingBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wedm_cutting builder
License requirements: cam_base ("CAM BASE")
.
- createWedmExtGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wire edm external geometry builder
License requirements: cam_base ("CAM BASE")
.
- createWedmFeatureGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wire edm feature geometry builder
License requirements: cam_base ("CAM BASE")
.
- createWedmGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wire edm geometry builder
License requirements: cam_base ("CAM BASE")
.
- createWedmIntGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wire edm internal geometry builder
License requirements: cam_base ("CAM BASE")
.
- createWedmLeadInOutBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wedm_lead_in_out builder
License requirements: cam_base ("CAM BASE")
.
- createWedmMachineControlBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a wire edm machine control operation builder
License requirements: cam_base ("CAM BASE")
.
- createWedmMethodBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wedm method builder
License requirements: cam_base ("CAM BASE")
.
- createWedmMoveControlBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wedm_corner_control builder
License requirements: cam_base ("CAM BASE")
.
- createWedmNocoreGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wire edm nocore geometry builder
License requirements: cam_base ("CAM BASE")
.
- createWedmOpenGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wire edm open geometry builder
License requirements: cam_base ("CAM BASE")
.
- createWedmOperationBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a WEDM operation builder
License requirements: cam_base ("CAM BASE")
.
- createWedmOrientGeomBuilder(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wire edm orient geometry builder
License requirements: cam_base ("CAM BASE")
.
- createWedmUserDefinedBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a wire edm user defined operation builder
License requirements: cam_base ("CAM BASE")
.
- createWeightAndCgBuilder() - Method in interface nxopen.features.ShipCollection
-
Creates a Features.ShipDesign.WeightAndCGBuilder.
- createWeldAdvisorBuilder() - Method in interface nxopen.weld.WeldManager
-
- createWeldBeadBuilder(Feature) - Method in interface nxopen.weld.WeldManager
-
- createWeldBuilder(Mesh) - Method in interface nxopen.cae.MeshManager
-
Creates a
WeldBuilder
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX7.5.2
- createWeldConnectionBuilder(CAEWeldConnection) - Method in interface nxopen.cae.CAEConnectionCollection
-
Creates a builder for WeldConnection Command
License requirements: nx_masterfem ("Finite Element Modeling")
.
- createWeldCut2Builder(WeldCut2) - Method in interface nxopen.features.ShipCollection
-
Creates a
WeldCut2Builder
License requirements: nx_ship_detail ("Ship Detail Design")
Created in NX8.0.1
- createWeldCutBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
WeldCutBuilder
License requirements: nx_ship_concept ("Ship Concept")
Created in NX7.5.0
- createWeldGroove1Builder(Feature) - Method in interface nxopen.weld.WeldManager
-
- createWeldGrooveBuilder(Feature) - Method in interface nxopen.weld.WeldManager
-
- createWeldLabelBuilder(Annotation) - Method in interface nxopen.weld.WeldManager
-
The welding annotation to edit, otherwise if null, then create a new one
License requirements: ugweld ("UG WELD") OR structure_weld ("STRUCTURE WELD")
.
- createWeldMesh(UFSf.Sf1dMeshData, UFSf.OrientationData, int, Tag[], int, Tag[], int, Tag) - Method in interface nxopen.uf.UFSf
-
- createWeldObjectBuilder() - Method in interface nxopen.weld.WeldManager
-
- createWeldPmiBuilder() - Method in interface nxopen.weld.WeldManager
-
- createWeldPointBuilder(Feature) - Method in interface nxopen.weld.WeldManager
-
- createWeldPointExitBuilder() - Method in interface nxopen.weld.WeldManager
-
- createWeldSymbol(double[], UFDrf.LeaderAttachType, UFDrf.Object, double[], UFDrf.WeldSymbols) - Method in interface nxopen.uf.UFDrf
-
- createWheelCoveringBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createWheelCoveringBuilder(WheelCovering) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
WheelCoveringBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createWheelFixingBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createWheelFixingBuilder(WheelFixing) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
WheelFixingBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createWidthDefinition() - Method in interface nxopen.CGMBuilder
-
Creates and returns a
WidthDefinition
object representing
the Width Palette.
- createWidthDefinition() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Creates and returns a
WidthDefinition
object representing the
Width Palette.
- createWidthDefinition() - Method in interface nxopen.PrintPDFBuilder
-
Creates and returns a
WidthDefinition
object representing
the Width Palette.
- createWindCatcherBuilder(WindCatcher) - Method in interface nxopen.routing.RouteManager
-
Creates an HVAC Wind Catcher builder.
- createWindshieldDatumBuilder(Feature) - Method in interface nxopen.features.AutomotiveCollection
-
- createWindshieldDatumBuilder(Feature) - Method in interface nxopen.features.FeatureCollection
-
- createWindshieldDatumBuilder(WindshieldDatum) - Method in interface nxopen.features.VehicleDesignCollection
-
Creates a
WindshieldDatumBuilder
License requirements: nx_general_packaging ("NX General Packaging")
Created in NX9.0.0
- createWire(ControlPoint, ControlPoint, ISegment[], StockData, Stock[], double) - Method in interface nxopen.routing.WireCollection
-
Creates a wire object.
- createWireAngle(UFVariant, double, double, boolean, String) - Method in interface nxopen.uf.UFPath
-
- createWireCutcom(UFVariant, UFPath.CutcomMode, int, boolean, boolean, String) - Method in interface nxopen.uf.UFPath
-
- createWireGuide() - Method in interface nxopen.cam.WireTool
-
Create a wire guide
License requirements: cam_base ("CAM BASE")
.
- createWireGuides(UFVariant, String) - Method in interface nxopen.uf.UFPath
-
- createWireHoleBuilder() - Method in interface nxopen.tooling.WireHoleCollection
-
Creates wire hole builder
License requirements: None.
- createWireTool(CAMObject) - Method in interface nxopen.cam.NCGroupCollection
-
Creates a wire tool
License requirements: cam_base ("CAM BASE")
.
- createWithOffset(Tag, Tag) - Method in interface nxopen.uf.UFPoint
-
- createWithPad() - Method in interface nxopen.die.HoleChildBuilder
-
Returns the create with pad switch of the die hole, if true a pad will be created around the hole, if false the pad will not be created.
- createWithPad() - Method in interface nxopen.die.HoleParentBuilder
-
Returns the create with pad switch of die holes, if true a pad will be created around the holes, if false the pad will not be created.
- createWithPad() - Method in interface nxopen.die.KeywayBuilder
-
Returns the value, true or false) to decide if the pad should be created for the keyway
License requirements: None.
- createWithParameter(double, double, double, double) - Method in interface nxopen.cam.UdtSectionBuilder
-
Create a new udt section item with parameter
License requirements: cam_base ("CAM BASE")
.
- createWithUnits(String, Unit) - Method in interface nxopen.ExpressionCollection
-
Creates an expression with units.
- createWorkingPart(CloneObject, TaggedObject) - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Creates the working part.
- createWorkInstructionBuilder(CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Create Work Instruction builder for authoring Work Instructions.
- createWorkInstructionOutputBuilder() - Method in interface nxopen.cam.CAMSetup
-
Create Work Instruction Output builder for publishing Work Instructions.
- createWorkpieceBuilder() - Method in interface nxopen.tooling.WorkpieceCollection
-
Creates Workpiece builder
License requirements: None.
- createWrapAroundDistanceLines() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the setting to indicate if the wrap around distance lines should be created,
true they will be created, false they will not be created.
- createWrapAssembly(UFModl.WrapAssem) - Method in interface nxopen.uf.UFModeling
-
- createWrapBuilder(WrapUnwrap) - Method in interface nxopen.features.FeatureCollection
-
Creates a
WrapBuilder
License requirements: solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createWrapGeometry(UFModl.WrapGeom) - Method in interface nxopen.uf.UFModeling
-
- createWrapGeometryBuilder(WrapGeometry) - Method in interface nxopen.features.FeatureCollection
-
Creates a
WrapGeometryBuilder
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
Created in NX6.0.0
- createWrapObject(UFCurve.WrapData) - Method in interface nxopen.uf.UFCurve
-
- createXDimensions() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the option whether to create X dimensions
License requirements: None.
- createXform(Point3d, Vector3d, Vector3d, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates a Xform without parameters.
- createXform(Point3d, Matrix3x3, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates an Xform
License requirements: None.
- createXform(SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates an Xform that is based off the model space coordinate system.
- createXform(Point, Point, Point, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Create an Xform based on three points.
- createXform(DisplayableObject, DisplayableObject, DisplayableObject, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates an Xform by three planes.
- createXform(CoordinateSystem, Point, Point, Scalar, Scalar, Scalar, int, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates a Xform by picking up a point from an existing coordinate system
License requirements: None.
- createXform(CoordinateSystem, Offset, Offset, Scalar, Scalar, Scalar, int, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates a Xform by offsetting an existing coordinate system through
a translation and a rotation
License requirements: None.
- createXform(Point, Direction, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates an Xform based on a point and two vectors.
- createXform(Direction, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates an Xform based on two vectors.
- createXform(DisplayableObject, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates a Xform based on a plane and a vector.
- createXform(Point, Axis, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates an Xform using a Z axis and X point
The X-Axis is the vector from the Z-Axis vector to the point;
the Y-Axis is computed from the X and Z axis; the origin is the
intersection of the three vectors.
- createXform(Point, Point, ICurve, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates an Xform through a point and perpendicular to a curve or edge.
- createXform(Component, Component, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates an Xform in the context of the given
Component
.
- createXform(NXObject, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates an Xform from the Xform of a selected curve, plane, or drafting object.
- createXform(NXObject, Explosion, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates an Xform based on an object and an explosion.
- createXform(Explosion, Component, Component, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates an Xform based on the delta difference between the source and
destination components in the explosion.
- createXform(Point, XYZAxis, Direction, Scalar, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates an Xform based on origin and a direction.
- createXformAngleAxis(Axis, Expression, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on the axis and angle.
- createXformAssyCtxt(Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createXformAxisVector(Axis, Direction, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on a axis and vector.
- createXformByDynamicOffset(CoordinateSystem, Vector3d, Matrix3x3, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates an Xform whose location and orientation are determined by applying
a specified origin offset and transformation matrix to an existing coordinate system.
- createXformByPlaneXDirPoint(DisplayableObject, Direction, Point, SmartObject.UpdateOption, double, boolean, boolean) - Method in interface nxopen.XformCollection
-
Creates an Xform based on a planar face or datum plane, an X-axis vector direction, and a point.
- createXformByPlaneYDirPoint(DisplayableObject, Direction, Point, SmartObject.UpdateOption, double, boolean, boolean) - Method in interface nxopen.XformCollection
-
Creates an Xform based on a planar face or datum plane, a Y-axis vector direction, and a point.
- createXformByPointXDirZDir(Point, Direction, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates an Xform based on a point and two vectors.
- createXformByPointYDirZDir(Point, Direction, Direction, SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates an Xform based on a point and two vectors.
- createXformCsysToCsys(CoordinateSystem, CoordinateSystem, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on two csys.
- createXformDeltaXyz(Scalar[], SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on delta x, y, and z values where the x, y, and z
directions are relative to a reference coordinate system.
- createXformDistanceAngle(Expression, Expression, Axis, Direction, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on the distance and angle on object.
- createXformDistanceBetweenPoints(Point, Point, Direction, Expression, Expression, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on the direction and points.
- createXformDistanceDirection(Direction, Expression, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on the direction and distance.
- createXformDistanceRadial(Axis, Point, Expression, Expression, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on the axis and points.
- createXformDoubles(Tag, UFSo.UpdateOption, double[], double[], double[], double) - Method in interface nxopen.uf.UFSo
-
- createXformDynamic(Scalar[], Scalar[], SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on the manip.
- createXformExtract(Tag, UFSo.UpdateOption, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createXformFromCurrentView(SmartObject.UpdateOption, double) - Method in interface nxopen.XformCollection
-
Creates an XForm using the current viewing coordinate system.
- createXformOffsetXform(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag[], Tag) - Method in interface nxopen.uf.UFSo
-
- createXformPntXyDirs(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createXformPntXzDirs(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createXformPntYzDirs(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createXformRotateThreePoints(Axis, Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on the three points and vector.
- createXformThreePlanes(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createXformThreePoints(Tag, UFSo.UpdateOption, Tag, Tag, Tag, Tag) - Method in interface nxopen.uf.UFSo
-
- createXformTwoPoints(Point, Point, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Motion Xform based on two points.
- createXformWithReverseNormal(Xform, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates an Xform based on the delta difference between the source and
destination components in the explosion.
- createXformWithView(View, SmartObject.UpdateOption) - Method in interface nxopen.XformCollection
-
Creates a Xform with an existing view
License requirements: None.
- createXhatch(int, int, int[], Tag[]) - Method in interface nxopen.uf.UFDrf
-
- CreateXhatchData() - Constructor for class nxopen.uf.UFDrf.CreateXhatchData
-
- createYDimensions() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the option whether to create Y dimensions
License requirements: None.
- createYFrameBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
YFrameBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
- createZFrameBuilder(Feature) - Method in interface nxopen.features.ShipCollection
-
Creates a
ZFrameBuilder
License requirements: nx_ship_concept ("Ship Concept") OR nx_ship_basic ("Ship Basic Design") OR nx_ship_detail ("Ship Detail Design")
Created in NX5.0.0
- createZlevelMillingBuilder(CAMObject) - Method in interface nxopen.cam.OperationCollection
-
Creates a planar milling z level operation builder
License requirements: cam_base ("CAM BASE")
.
- createZoneLabels() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the flag that indicates if zone labels are created.
- createZoneLabels() - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
Returns the flag indicates to create zone labels or not.
- createZoneLabels() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- createZoneLabels() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the create zone labels
License requirements: None.
- createZoneMarking() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the flag that indicates if zone marking is create.
- createZoneMarking() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- createZoneMarkings() - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
Returns the flag indicates to create zone markings or not.
- createZoneMarkings() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the create zone markings
License requirements: None.
- createZones() - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
Returns the flag indicates to create zones or not.
- createZones() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the create zones
License requirements: None.
- CREATION - Static variable in class nxopen.features.shipdesign.StandardPartFrameworkBuilder.CreationType
-
In creation
- CREATION - Static variable in class nxopen.weld.WeldOverlapStatus
-
create overlap
- creationDirection() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the creation direction.
- creationDirection() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the creation direction type.
- creationMask - Variable in class nxopen.uf.UFDrf.SymbolInstance
-
- creationMethod() - Method in interface nxopen.cam.SpunOutlineGeom
-
Returns the creation method
License requirements: None.
- CreationMethod - Class in nxopen.routing
-
Describes the overstock creation method.
- creationMethod - Variable in class nxopen.uf.UFCurve.AskJoinedParmsData
-
- creationMode() - Method in interface nxopen.ame.PortBuilder
-
Returns the creation mode
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- CreationPostBuilder - Interface in nxopen.sim.postconfigurator
-
This class is used to create a new postprocessor.
- creationType() - Method in interface nxopen.ame.QueryBuilder
-
Returns the defined rule type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- creationType() - Method in interface nxopen.cae.Mesh3dHexBuilder
-
Returns the type of hex mesh
License requirements: nx_masterfem ("Finite Element Modeling")
.
- creationVersion - Variable in class nxopen.uf.UFObj.AskCreModVersionsData
-
- creChamferWithFlipOption(int, String, String, String, Tag[], boolean) - Method in interface nxopen.uf.UFModeling
-
- creChamferWithInstanceAndFlipOption(int, String, String, String, Tag[], boolean, boolean) - Method in interface nxopen.uf.UFModeling
-
- creDefFacepairFeat(Tag, Tag, Tag, Tag[], Tag[]) - Method in interface nxopen.uf.UFModeling
-
- CREEP_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- CREEP_STRAIN_AT_ELEMENT_INTEGRATION_POINT - Static variable in class nxopen.cae.Result.Quantity
-
- CREF - Static variable in class nxopen.ame.PlcDataType
-
- creSelFacepairFeat(Tag, Tag, Tag[], Tag[]) - Method in interface nxopen.uf.UFModeling
-
- CreSettings() - Constructor for class nxopen.uf.UFObj.CreSettings
-
- CreSettings(int, int, int) - Constructor for class nxopen.uf.UFObj.CreSettings
-
- crestLine() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the Crest Line
License requirements: None.
- crestLineDirection() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the Crest Line Direction(Start and End Points)
License requirements: None.
- crestOffset() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the crest offset builder
License requirements: None.
- creTextBlock(int, int, double[], int, String[]) - Method in interface nxopen.uf.UFDrf
-
- creTrimBsurf(int, int, int, int, double[], double[], double[], int, int[], int[], Tag[], int, double) - Method in interface nxopen.uf.UFModlGeneral
-
- CreTrimBsurfData() - Constructor for class nxopen.uf.UFModlGeneral.CreTrimBsurfData
-
- CRIT_VALUE_TYPE_DOUBLE - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
-
- CRIT_VALUE_TYPE_INTEGER - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
-
- CRIT_VALUE_TYPE_LOGICAL - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
-
- CRIT_VALUE_TYPE_STRING - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
-
- CRIT_VALUE_TYPE_UNDEFINED - Static variable in class nxopen.uf.UFFbmGeom.CritValueType
-
- CriteriaData() - Constructor for class nxopen.assemblies.AttributeSearchTermBuilder.CriteriaData
-
- CriteriaData() - Constructor for class nxopen.pdm.FindCriteria.CriteriaData
-
- criteriaList() - Method in interface nxopen.annotations.SearchModelViewBuilder
-
Returns the criteria list
License requirements: None.
- criteriaList - Variable in class nxopen.uf.UFFbmGeom.AskAvailableCriteriaData
-
- criteriavalue - Variable in class nxopen.cae.modelcheck.ITestValue.CriteriaValueData
-
- CriteriaValueData() - Constructor for class nxopen.cae.modelcheck.ITestValue.CriteriaValueData
-
- criterion - Variable in class nxopen.cae.Result.ElementValue
-
- CRITICAL - Static variable in class nxopen.die.FlangeTaskBuilder.PierceTypes
-
Use Critical tolerance.
- CRITICAL - Static variable in class nxopen.die.PierceTaskBuilder.PrecisionTypes
-
Critical hole
- CRITICAL_DEPTH - Static variable in class nxopen.cam.CutLevelPlanar.Types
-
Critical Depths
- CRITICAL_PLANE - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.AxisDirectionSearchMethodEnum
-
Critical Plane
- CRITICAL_PLANE - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum
-
Critical Plane
- criticalPlaneOption() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the critical plane option.
- CRMSPLY_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- CRMSPLY_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- CRMSPRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- CRMSSTRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- CRMSSTRESS - Static variable in class nxopen.cae.Result.Quantity
-
- crnObj - Variable in class nxopen.uf.UFRoute.AskObjCornerInfoData
-
- crnRcp - Variable in class nxopen.uf.UFRoute.AskObjCornerInfoData
-
- crnTyp - Variable in class nxopen.uf.UFRoute.AskObjCornerInfoData
-
- CROSS - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Cross symbol
- CROSS - Static variable in class nxopen.cae.MarkerType0d
-
- CROSS - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Cross marker
- CROSS - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Cross marker
- CROSS - Static variable in class nxopen.cae.xyplot.PointMarker
-
Cross marker
- CROSS - Static variable in class nxopen.features.ThroughCurveMeshBuilder.EmphasisType
-
Emphasis on cross strings.
- CROSS - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- CROSS - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- CROSS - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
Cross
- CROSS - Static variable in class nxopen.preferences.SessionModeling.EndpointDisplayStyleType
-
- CROSS - Static variable in class nxopen.preferences.SessionModeling.PoleDisplayStyleType
-
- CROSS - Static variable in class nxopen.preferences.SessionModeling.PoleEditStyleType
-
- CROSS - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.CagePolylineVertexStyles
-
- CROSS - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
-
- cross(double[], double[]) - Method in interface nxopen.uf.UFVec2
-
- cross(double[], double[]) - Method in interface nxopen.uf.UFVec3
-
- CROSS_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- CROSS_ARROW - Static variable in class nxopen.uf.UFDrf.ArrowheadAndFillType
-
- CROSS_HOLE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
-
Depth options: Cross Hole
- CROSS_HOLE_DIMENSIONS - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthTypes
-
Depth options: Cross Hole Dimensions
- CROSS_MIN_STRING_2 - Static variable in class nxopen.uf.UFConstants
-
- CROSS_PIN - Static variable in class nxopen.motion.JointDefine.UniversalJointAxisType
-
Cross Pin Axis Type
- CROSS_SECTION - Static variable in class nxopen.ame.ElectricalAnnotationSettingsBuilder.AnnotationAttrType
-
- CROSS_SECTION_CENTERS - Static variable in class nxopen.cam.InspectionMethodBuilder.CylinderFittingTypes
-
Cross Section Centers
- CROSS_SPECTRUM - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Cross Spectrum
- CROSS_SPECTRUM - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Cross Spectrum
- CROSS_SPECTRUM - Static variable in class nxopen.cae.XyFunctionResponseType
-
Function is Cross Spectrum
- crossBoundaryMode - Variable in class nxopen.uf.UFCurve.OcfData
-
- crossCurveCount() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the cross curve count
License requirements: cam_base ("CAM BASE")
.
- crossCurveList() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the Cross Curve List
License requirements: None.
- crossCurveNormalToFlowCount() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the cross curves normal to flow count
License requirements: cam_base ("CAM BASE")
.
- crossCurvesList() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the cross curves list which is required.
- crossCurvesMethod() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the cross curves selection method
License requirements: cam_base ("CAM BASE")
.
- CROSSCUT_ZIG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Crosscut Zig
- CROSSCUT_ZIG_ZAG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Crosscut Zig Zag
- CROSSCUT_ZIG_ZAG_WITH_LIFTS - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Crosscut Zig Zag with Lifts
- crossDegree() - Method in interface nxopen.SurfaceRebuildData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- CROSSHATCH - Static variable in class nxopen.annotations.HatchBuilder.AnnotationTypes
-
Deprecated.
Crosshatch
- CROSSHATCH - Static variable in class nxopen.annotations.HatchFillSettingsBuilder.AnnotationTypes
-
Crosshatch
- CROSSHATCH - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI crosshatch type
- crossHatch() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the HatchFillSetting
License requirements: None.
- crossHatch() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns the status of cross hatch.
- crosshatch() - Method in interface nxopen.drawings.ViewStyleSectionBuilder
-
Returns the crosshatch toggle on the SECTION tab of the View Style Dialog
License requirements: None.
- crossHatch() - Method in interface nxopen.preferences.SectionViewPreferences
-
Returns the status of cross hatch.
- crosshatchAdjacencyTolarance() - Method in interface nxopen.drawings.SectionViewStyle
-
Returns the value of crosshatch adjacency tolarance.
- crosshatchAdjacencyTolarance() - Method in interface nxopen.preferences.SectionViewPreferences
-
Returns the value of crosshatch adjacency tolarance.
- crosshatchAdjacencyTolerance() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the flag indicating whether PMI support for lightweight section view crosshatch adjacency tolerance is available
License requirements: None.
- crosshatchAngle() - Method in interface nxopen.annotations.RegionBuilder
-
- crosshatchAreaFillsCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- crosshatchColor() - Method in interface nxopen.annotations.RegionBuilder
-
Returns the crosshatch color
License requirements: None.
- crosshatchDistance() - Method in interface nxopen.annotations.RegionBuilder
-
- crosshatchFile() - Method in interface nxopen.annotations.HatchBuilder
-
- crosshatchFile() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the crosshatch file
License requirements: None.
- crosshatching() - Method in interface nxopen.CGMImporter
-
Returns the crosshatching flag, true if crosshatching should be done
License requirements: None.
- crosshatchInheritedSectionViews() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the crosshatch inherited section views
License requirements: None.
- crossHatchMappingFile() - Method in interface nxopen.DxfdwgCreator
-
Returns the CrossHatchMappingFile command - definition file for cross hatch mapping
License requirements: None.
- crossHatchMappingFile() - Method in interface nxopen.DxfdwgImporter
-
Returns the CrossHatchMappingFile command - definition file for cross hatch mapping
License requirements: None.
- crosshatchPattern() - Method in interface nxopen.annotations.RegionBuilder
-
- crosshatchPmiLightweightSectionView() - Method in interface nxopen.preferences.InheritPmiPreferences
-
Returns the cross-hatch setting for the current inherited PMI Lightweight Section View
License requirements: None.
- crosshatchPmiLwsv() - Method in interface nxopen.drawings.InheritPmiViewStyle
-
Returns the cross-hatch setting for the current inherited PMI Lightweight Section View
License requirements: None.
- crosshatchPmiLwsv() - Method in interface nxopen.drawings.ViewStyleInheritPmiBuilder
-
Returns the cross-hatch setting for the current inherited PMI Lightweight Section View
License requirements: None.
- crosshatchSettings() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the crosshatch settings
License requirements: None.
- crosshatchSettings() - Method in interface nxopen.annotations.RegionBuilder
-
Returns the crosshatch settings block
License requirements: None.
- crossHoleAngle() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the cross hole angle
License requirements: None.
- crossHoleCircle() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the cross hole circle
License requirements: None.
- crossHoleDiameter() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the cross hole diameter
License requirements: None.
- crossHoleDistance() - Method in interface nxopen.cam.CenterlineDrillTurningBuilder
-
Returns the cross hole distance
License requirements: None.
- CROSSING - Static variable in class nxopen.display.SelPref.SelectionRule
-
multi-select rule crossing
- crossingLevel() - Method in interface nxopen.cae.responsesimulation.LcrResultsEvaluationSettingBuilder
-
- crossingLevelExpression() - Method in interface nxopen.cae.responsesimulation.LcrResultsEvaluationSettingBuilder
-
Returns the crossing level expression
License requirements: nx_response_anlys ("NX Response Analysis")
.
- crossLinesRatio() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the ratio of cross center lines.
- crossMaxDegree() - Method in interface nxopen.SurfaceRebuildData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- crossMaxSegments() - Method in interface nxopen.SurfaceRebuildData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- CROSSOVER - Static variable in class nxopen.cam.MoveBuilder.Motion
-
Crossover
- crossover() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color crossover
License requirements: None.
- crossOverDistance() - Method in interface nxopen.cam.HoleDrillingBuilder
-
Returns the crossover distance
License requirements: None.
- crossRebuildType() - Method in interface nxopen.SurfaceRebuildData
-
Returns
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- CrossSection - Interface in nxopen.routing
-
- CrossSectionCollection - Interface in nxopen.routing
-
- crossSectionCurveOption() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the cross section curve option
License requirements: solid_modeling ("SOLIDS MODELING")
.
- crossSectionCurves() - Method in interface nxopen.geometricanalysis.GapFlushnessBuilder
-
Returns the Cross Section Curves
License requirements: solid_modeling ("SOLIDS MODELING")
.
- crossSectionDirection() - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Returns the orientation vector. cross section direction of the stock.
- CrossSectionParameters - Interface in nxopen.cae
-
This class is worked as a packet of information that can be used to change cross-section state.
- crossSections() - Method in interface nxopen.routing.RouteManager
-
CrossSection collection .
- crossSections - Variable in class nxopen.uf.UFRoute.AskStockDataCrossData
-
- crossSectionType() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the cross section for face blend
License requirements: None.
- crossSectionType() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the bead profile type .
- crossSectionType() - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Returns the cross section type of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- crossSectionViewSetLockRotation(int, boolean) - Method in interface nxopen.cae.Post
-
Orients and disables all rotations in the input
postview id.
- crossSectionViewSetResult(int, CrossSectionParameters) - Method in interface nxopen.cae.Post
-
Set the result for color display in the input cross-section view id.
- crossSectionWidth() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the cross section width.
- crossSelection() - Method in interface nxopen.blockstyler.Node
-
Returns the flag indicating whether cross section is allowed.
- CrossSheetReference - Interface in nxopen.pdm
-
Represents a base class that provides common methods for various model elements in a
CollaborativeDesign
.
- crossSurfaceRebuildData() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the cross surface rebuild data,
Rebuild
.
- crossTag - Variable in class nxopen.uf.UFRoute.LoadStockData
-
- crossTemplateString() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the cross template curve.
- CRV_PLANE_NORMAL - Static variable in class nxopen.geometricutilities.ProjectionOptions.DirectionType
-
Curve plane Normal
- crvatr - Variable in class nxopen.uf.UFCurve.PtSlopeCrvatr
-
- crvatrType - Variable in class nxopen.uf.UFCurve.PtSlopeCrvatr
-
- crvOpt - Variable in class nxopen.uf.UFModl.StycornerData
-
- CS - Static variable in class nxopen.preferences.SessionUserInterface.JournalLanguageType
-
- CsdEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the class of evaluation setting for CSD
To create or edit an instance of this class, use
CsdEvaluationSettingBuilder
Created in NX6.0.0
- CsdEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- CSDExcitation - Interface in nxopen.cae.responsesimulation
-
Represents an CSD excitation.
- CSDExcitation.CorrelationType - Class in nxopen.cae.responsesimulation
-
Represents the correlation type.
- CSDExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- CSDExcitationBuilder.CSDFunction - Class in nxopen.cae.responsesimulation
-
- CSDFunction() - Constructor for class nxopen.cae.responsesimulation.CSDExcitationBuilder.CSDFunction
-
- CSE - Static variable in class nxopen.sim.SimDebugBuilder.DriverType
-
CSE driver
- csetTag - Variable in class nxopen.uf.UFAssem.AskLastFilterData
-
- CSHARP - Static variable in class nxopen.report.ProgramInformation.LanguageType
-
C sharp language
- CSHEET - Static variable in class nxopen.PrintBuilder.PaperSize
-
C Sheet, 17- by 22-inches
- csinkAngle - Variable in class nxopen.features.Hole.CountersinkHoleData
-
Expression for countersink angle
- csinkAngle - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
-
- csinkDiameter() - Method in interface nxopen.cam.Cycle
-
Returns the csink diameter
License requirements: None.
- csinkDiameter - Variable in class nxopen.features.Hole.CountersinkHoleData
-
Expression for countersink diameter
- csMode() - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
Returns the cs mode
License requirements: None.
- csOption() - Method in interface nxopen.cae.AssignNodalCSBuilder
-
Returns the cs option
License requirements: None.
- CSV - Static variable in class nxopen.cae.LaminateViewDrapingResultsBuilder.OuputChoice
-
- CSV - Static variable in class nxopen.cam.InspectionMeasDataBuilder.InputFormatType
-
Comma separated
- CSV - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.OutputFormatType
-
- CSV - Static variable in class nxopen.mechatronics.ECADExportBuilder.ExportFileType
-
Deprecated.
CSV File
- CSV - Static variable in class nxopen.mechatronics.SCOUTExportBuilder.ExportFileType
-
CSV File
- csvFileName() - Method in interface nxopen.weld.ExportWeldBuilder
-
Returns the CSV file name
License requirements: ugweld ("UG WELD")
.
- csys() - Method in interface nxopen.cae.connections.ICsys
-
Returns the csys
License requirements: None.
- CSYS - Static variable in class nxopen.cae.connections.ModelizationResultType
-
Csys
- csys() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the coordinate system to be used for translating the selected elements
License requirements: None.
- CSYS - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.DrapingDirectionType
-
Define draping direction using a coordinate system
- CSYS - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.ProjectionDrapingDirectionType
-
Define draping direction using a coordinate system
- csys() - Method in interface nxopen.cae.Mesh0dBuilder
-
Returns the csys of lumped mass element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- csys() - Method in interface nxopen.cae.NodalForceReportBuilder
-
Returns the csys
License requirements: None.
- csys() - Method in interface nxopen.cae.NodeCreateBuilder
-
Returns the csys
License requirements: None.
- csys() - Method in interface nxopen.cae.NodeElementInfoBuilder
-
Returns the displacement/reference csys
License requirements: None.
- csys() - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
Returns the csys
License requirements: None.
- csys() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the csys
License requirements: None.
- csys() - Method in interface nxopen.cae.responsesimulation.StrainGageBuilder
-
Returns the orientation direction, Only available when the strain gage's orientation plane type is
StrainGageOrientationPlane.CSYS
License requirements: nx_response_anlys ("NX Response Analysis")
Created in NX6.0.0
- CSYS - Static variable in class nxopen.cae.responsesimulation.StrainGageOrientationPlane
-
- csys() - Method in interface nxopen.cae.ResultVariable
-
Returns the Co-ordinate System
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- csys() - Method in interface nxopen.cam.GeometryGroup
-
Returns the user defined coordinate system
License requirements: cam_base ("CAM BASE")
.
- csys() - Method in interface nxopen.cam.LaserControlPoint
-
Returns the Local Head Orientation
License requirements: None.
- csys() - Method in interface nxopen.cam.LaserHeadOrientation
-
Returns the Head Orientation
License requirements: None.
- csys() - Method in interface nxopen.die.PressureSystemChildBuilder
-
Returns the csys of the pressure system.
- CSYS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide coordinate systems
- csys() - Method in interface nxopen.features.DatumCsysBuilder
-
Returns the CSYS that defines a Datum CSYS
License requirements: None.
- CSYS - Static variable in class nxopen.features.FitSurfaceBuilder.DirectionType
-
CSYS will specify same as orientation but with the need to make it associative with existing geometry.
- CSYS - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
csys
- csys() - Method in interface nxopen.features.ScaleBuilder
-
- csys() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the c sys
License requirements: None.
- CSYS - Static variable in class nxopen.features.sheetmetal.FlatSolidBuilder.OrientationType
-
transform flat solid body as per orientation defined by CSYS
- CSYS - Static variable in class nxopen.features.sheetmetal.FlatSolidBuilder.TransformComponentsOption
-
transform components as CSYS
- CSYS - Static variable in class nxopen.geometricutilities.GeneralPattern.FromLocationOptions
-
csys
- csys() - Method in interface nxopen.geometricutilities.GeometryLocationData
-
Returns the csys
License requirements: None.
- CSYS - Static variable in class nxopen.geometricutilities.GeometryLocationData.EntityTypes
-
- csys() - Method in interface nxopen.geometricutilities.OrientXpressBuilder
-
Returns the orientXpress reference csys when reference option is set to csys
License requirements: None.
- CSYS - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Reference CSYS is user specified coordinate system
- CSYS - Static variable in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType
-
No steering wheel or pedal, use csys to define
the position and orientation of hand or foot
- csys() - Method in interface nxopen.IgesCreator
-
Returns the csys - reference coordinate system for exported data
License requirements: None.
- csys() - Method in interface nxopen.motion.BushingDefine
-
Returns the csys of bushing, the coordinate system of action and reaction are same each other
License requirements: mechanisms ("MECHANISMS")
.
- CSYS - Static variable in class nxopen.motion.BushingDefine.OrientationTypes
-
CSYS orientation type
- CSYS - Static variable in class nxopen.motion.JointDefine.OrientationType
-
CSYS orientation type
- csys() - Method in interface nxopen.motion.LinkAttachmentData
-
Returns the csys - if the selected type is CSYS, use this method to access it.
- csys() - Method in interface nxopen.motion.MarkerBuilder
-
Returns the csys
License requirements: None.
- csys() - Method in interface nxopen.motion.RoadBuilder
-
Returns the coordinate system of the optional link object
License requirements: mechanisms ("MECHANISMS")
.
- csys() - Method in interface nxopen.motion.VObject
-
Returns the force csys
License requirements: None.
- csys() - Method in interface nxopen.ObjectTypeSelector
-
Returns the csys - This should be set to true if coordinate systems are desired in the output file
License requirements: None.
- csys() - Method in interface nxopen.PasteSpecialBuilder
-
Returns the destination coordinate system
License requirements: None.
- CSYS - Static variable in class nxopen.PasteSpecialBuilder.DestinationOption
-
- csys() - Method in interface nxopen.sim.KinematicJunctionBuilder
-
Returns the CSYS associated with the junction
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder") OR resource_manager_nx ("Teamcenter Resource Manager")
.
- csys - Variable in class nxopen.uf.UFSket.Info
-
- csys() - Method in interface nxopen.UFSession
-
- CSYS_DATA - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsMatOrientationMethod
-
Use coordinate system data to orient the material.
- CSYS_FACE_NORMAL_ANGLE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
csys face normal angle
- CSYS_NOT_PARALLEL - Static variable in class nxopen.uf.UFConstants
-
- CSYS_ROTATION - Static variable in class nxopen.cam.OrientGeomBuilder.SpecialOutputModes
-
Special output mode: CSYS rotation
- CSYS_TO_CSYS - Static variable in class nxopen.geometricutilities.ModlMotion.Options
-
Move by CSYS to CSYS
- CSYS_TO_CSYS - Static variable in class nxopen.uf.UFConstants
-
- csysAssemblyState() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the assy coordinate system state
License requirements: ugweld ("UG WELD")
.
- csysAssociative() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the csys associative
License requirements: None.
- csysAxis() - Method in interface nxopen.cae.PostGraphAlongPathBuilder
-
- CsysData() - Constructor for class nxopen.weld.WeldPointBuilder.CsysData
-
- csysDataType() - Method in interface nxopen.cae.BushingEADBuilder
-
Returns the get selection csys data type gets coordinate system data type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- csysdatatype - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBushingData
-
Orientation coordinate system type for csys data option.
- csysdatatype - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
Material orientation coordinate system type for csys data option.
- csysDataType() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the get selection csys data type gets coordinate system data type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- CsysDiameterHeightData() - Constructor for class nxopen.cae.CylinderBoundingVolume.CsysDiameterHeightData
-
- CsysEdgelengthsData() - Constructor for class nxopen.cae.BoxBoundingVolume.CsysEdgelengthsData
-
- csysFixedSizeOnScreen() - Method in interface nxopen.preferences.PartVisualizationScreen
-
Returns whether the CSYS display in fixed size on screen.
- csysFixedSizeOnScreen() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
- csysInformationListing() - Method in interface nxopen.cam.Preferences
-
Returns the base info
License requirements: None.
- csysMatrix - Variable in class nxopen.uf.UFAssem.AskComponentData
-
- csysMatrix - Variable in class nxopen.uf.UFRoute.AskPlacesTransformData
-
- csysMatrix - Variable in class nxopen.uf.UFUi.PickCsysData
-
- csysMatrix - Variable in class nxopen.uf.UFUi.SpecifyCsysData
-
- csysMirrorOption() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the Alternate Datum CSYS mirror method option
License requirements: None.
- csysMirrorOption() - Method in interface nxopen.features.MirrorBuilder
-
Returns the Coordinate System mirroring option
License requirements: None.
- csysMode - Variable in class nxopen.uf.UFPart.ImportPartModes
-
- csysOffset - Variable in class nxopen.cae.FEModelOccurrence.LabelOffsetsData
-
csys offset
- csysOffset - Variable in class nxopen.cae.FEModelOccurrence.OccEntityLabelOffsetsData
-
csys offset
- csysOption() - Method in interface nxopen.cae.Mesh0dBuilder
-
Returns the method to be used for translating the selected elements
License requirements: None.
- csysOrientWcsToMcs() - Method in interface nxopen.cam.Preferences
-
Returns the orient wcs to mcs
License requirements: None.
- CSYSORIGIN - Static variable in class nxopen.cae.FreeBodyResultsBuilder.LocationMethod
-
location is defined by coordinate system origin
- csysOrigin - Variable in class nxopen.uf.UFCsys.AskCsysInfoData
-
- csysPick() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the csys pick
License requirements: None.
- csysReferenceType() - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
Returns the coordinate system reference type
License requirements: None.
- csysReferenceType() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
Returns the coordinate system reference type
License requirements: None.
- csysReferenceType() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the coordinate system reference type
License requirements: None.
- csysReferenceType() - Method in interface nxopen.cam.InspectionEdgePointFeatureBuilder
-
Returns the coordinate system reference type
License requirements: None.
- csysReferenceType() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the coordinate system reference type
License requirements: None.
- csysReferenceType() - Method in interface nxopen.cam.InspectionPlaneFeatureBuilder
-
Returns the csys reference type
License requirements: None.
- csysReferenceType() - Method in interface nxopen.cam.InspectionPointFeatureBuilder
-
Returns the coordinate system reference type
License requirements: None.
- csysReferenceType() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the csys reference type
License requirements: None.
- csysRefType() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the coordinate system reference type
License requirements: None.
- csysRefType() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the coordinate system reference type
License requirements: None.
- csysRefType() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Returns the coordinate system reference type
License requirements: None.
- csysRefType() - Method in interface nxopen.cam.InspectionSphereFeatureBuilder
-
Returns the csys ref type
License requirements: None.
- csysSelection() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the selected reference csys
License requirements: None.
- csysShowThrough() - Method in interface nxopen.preferences.PartVisualizationScreen
-
Returns whether the CSYS display in show through mode
License requirements: None.
- csysShowThrough() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
- csysTag - Variable in class nxopen.uf.UFModl.DimensionData
-
- csysTag - Variable in class nxopen.uf.UFModlFeatures.AskDatumCsysComponentsData
-
- csysTag - Variable in class nxopen.uf.UFSket.Info
-
- csysTag - Variable in class nxopen.uf.UFUi.SpecifyCsysData
-
- csystargetFace() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
Returns the csys target face.
- CSYSTEM - Static variable in class nxopen.cae.BushingEADBuilder.OrientationMethod
-
use a csystem to orient the element
- CSYSTEM - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsOrientationMethod
-
Use a csystem to orient the element
- CSYSTEM - Static variable in class nxopen.cae.GapEADBuilder.OrientationMethod
-
use a csystem to orient the element
- csystem() - Method in interface nxopen.SketchInPlaceBuilder
-
Returns the csys method for sketch
License requirements: None.
- CSYSTEM_DATA - Static variable in class nxopen.cae.BushingEADBuilder.OrientationMethod
-
use a csys data to orient the element
- CSYSTEM_DATA - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsOrientationMethod
-
Use a csys data to orient the element
- CSYSTO_CSYS - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
-
a relative orientation defined by two CSYSs to transform the seed to an instance location.
- csysToCsys(double[], double[], double[], double[], double[], double[]) - Method in interface nxopen.uf.UFMtx4
-
- CsysType - Class in nxopen.cae.connections
-
Csys types
- csysType() - Method in interface nxopen.cae.connections.ICsys
-
Returns the csys type
License requirements: None.
- csysType() - Method in interface nxopen.cae.NodalForceReportBuilder
-
Returns the csys type
License requirements: None.
- csysType() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the coordinate system used for creating section plane along
X, Y or Z principal planes.
- csysTypeEnum() - Method in interface nxopen.cae.DisplayNodalCsysBuilder
-
Returns the coordinate system type
License requirements: None.
- csysVisibility() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the csys visibility to specify if hide csys in kinematic model
License requirements: None.
- csysWorkPartState() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the work coordinate systemstate
License requirements: ugweld ("UG WELD")
.
- CTR - Static variable in class nxopen.features.shipdesign.ThicknessDirectionBuilder.ThicknessDirectionType
-
Thickness is centered about the mold face.
- CUBES - Static variable in class nxopen.cae.Post.Style
-
- CUBIC - Static variable in class nxopen.cae.AfuData.InterpolationType
-
Cubic Interpolation
- CUBIC - Static variable in class nxopen.cae.Function.InterpolationMethod
-
Indicates data calculated by cubic interpolation
- CUBIC - Static variable in class nxopen.die.OutputCurvesBuilder.SmoothTypes
-
Cubic
- CUBIC - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.SmoothingName
-
Cubic approximation
- CUBIC - Static variable in class nxopen.facet.SubdivideFacetBodyBuilder.InterpolationMethodType
-
In the cubic option the sub-triangles are fitted cubic to the surrounding triangles.
- CUBIC - Static variable in class nxopen.features.BridgeCurveBuilder.CurveFitTypes
-
Deprecated.
fit curve with 3 degrees
- CUBIC - Static variable in class nxopen.features.CompositeCurveBuilder.JoinMethod
-
Cubic
- CUBIC - Static variable in class nxopen.features.JoinCurvesBuilder.OutputCurve
-
Cubic output curve
- CUBIC - Static variable in class nxopen.features.SectionSurfaceBuilder.UDegreeEnum
-
Deprecated.
cubic in u
- CUBIC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.Types
-
Cubic type
- CUBIC - Static variable in class nxopen.features.SectionSurfaceBuilderEx.UDegreeType
-
cubic in u
- CUBIC - Static variable in class nxopen.features.StudioSplineBuilder.MatchKnotsType
-
Deprecated.
Match knots for cubic non-periodic spline
- CUBIC - Static variable in class nxopen.features.StudioSplineBuilderEx.MatchKnotsTypes
-
Match knots for cubic non-periodic spline
- CUBIC - Static variable in class nxopen.features.StudioSurfaceBuilder.TransitionOptions
-
Cubic
- CUBIC - Static variable in class nxopen.features.StudioSurfaceBuilderEx.TransitionOptions
-
Cubic
- CUBIC - Static variable in class nxopen.features.StyledSweepBuilder.TransitionOptions
-
Cubic
- CUBIC - Static variable in class nxopen.features.SweptBuilder.InterpolationOptions
-
Cubic
- CUBIC - Static variable in class nxopen.features.VariableOffsetBuilder.MethodOptions
-
cublic offset applied along both of U and V directions
- CUBIC - Static variable in class nxopen.fields.FieldEvaluator.ValuesOutsideTableInterpolationEnum
-
Extrapolates from the boundary out into space using the cubic extrapolation method
- CUBIC - Static variable in class nxopen.geometricutilities.CurveFitData.Join
-
Cubic
- CUBIC - Static variable in class nxopen.geometricutilities.CurveFitJoin.JoinMethod
-
Cubic
- CUBIC - Static variable in class nxopen.geometricutilities.CurveFitOptions.FitMethod
-
Cubic
- CUBIC - Static variable in class nxopen.geometricutilities.LawBuilder.Type
-
cubic law type
- CUBIC - Static variable in class nxopen.geometricutilities.Rebuild.DegreeTypes
-
The rebuild degree is cubic.
- CUBIC - Static variable in class nxopen.geometricutilities.ScalingMethodBuilder.BlendingFunctionTypes
-
Cubic
- CUBIC - Static variable in class nxopen.motion.SegmentBuilder.StraightTransitionTypeChoices
-
Cubic
- CUBIC - Static variable in class nxopen.preferences.SessionModeling.CurveFitMethodType
-
Indicates the Curve Fit Method type is cubic
- CUBIC1D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
cubic interpolation
- CUBIC_ALONG_SPINE - Static variable in class nxopen.geometricutilities.LawBuilder.Type
-
cubic along spine law type
- CUBIC_JOIN - Static variable in class nxopen.uf.UFCurve.JoinTypes
-
- CUBIC_LINEAR2D - Static variable in class nxopen.fields.FieldEvaluator.InterpolationEnum
-
cubic interpolation in x direction, linear in y direction
- CUBIC_NURBBESTFIT_SPLINE - Static variable in class nxopen.IgesImporter.CopiousDataEnum
-
map copious data to Cubic Nurb best fit spline
- CUBIC_SPLINE - Static variable in class nxopen.cam.LaserProfileMove.InterpMethods
-
Cubic Spline
- CUBIC_SPLINE - Static variable in class nxopen.cam.ToolAxisInterpolate.InterpolationMethodTypes
-
Cubic Spline
- CUBIC_TWIST - Static variable in class nxopen.features.shipdesign.OrientationRegionItemBuilder.OrientationMethodTypes
-
The web of the profile moves from a starting orientation to an ending orientation in a cubic fashion.
- cubicTypeMode() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the cubic type mode.
- cue() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.CompositeBlock
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.SelectElement
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.SelectFacetRegion
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.SelectFeature
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.SelectNode
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the Cue
License requirements: None.
- cue() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the Cue
License requirements: None.
- CUMULATIVE_ROOT_MEAN_SQUARE_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- CUMULATIVE_ROOT_MEAN_SQUARE_ROTATION - Static variable in class nxopen.cae.Result.Quantity
-
- curBodies() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
Returns the current body list.
- CURING - Static variable in class nxopen.PhysicalMaterial.Type
-
Curing material
- CURL_HEM_TYPE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.TypeOptions
-
- CURRENT - Static variable in class nxopen.cae.CreateJtBuilder.Component
-
Value represents component used to create result parameter
- CURRENT - Static variable in class nxopen.cae.Result.Quantity
-
- current() - Method in interface nxopen.LayoutCollection
-
Returns the current layout of the part.
- CURRENT - Static variable in class nxopen.mechatronics.AccelerometerBuilder.OutputMeasureType
-
MEASURE_ELECTRIC_CURRENT
- CURRENT - Static variable in class nxopen.mechatronics.DistanceSensorBuilder.OutputMeasureType
-
MEASURE_ELECTRIC_CURRENT
- CURRENT - Static variable in class nxopen.mechatronics.GenericSensorBuilder.OutputMeasureType
-
MEASURE_ELECTRIC_CURRENT
- CURRENT - Static variable in class nxopen.mechatronics.InclinometerBuilder.OutputMeasureType
-
MEASURE_ELECTRIC_CURRENT
- CURRENT - Static variable in class nxopen.mechatronics.PositionSensorBuilder.OutputMeasureType
-
MEASURE_ELECTRIC_CURRENT
- CURRENT - Static variable in class nxopen.mechatronics.VelocitySensorBuilder.OutputMeasureType
-
MEASURE_ELECTRIC_CURRENT
- CURRENT - Static variable in class nxopen.PartCollection.RefsetOption
-
Use the component's current reference set,
and restore the reference set of the previous work component
- CURRENT - Static variable in class nxopen.tooling.MWPartingManagerBuilder.RegisterType
-
Register current UNDO mark.
- CURRENT - Static variable in class nxopen.View.ScaleAdjustment
-
- current() - Method in interface nxopen.visualreporting.VisualReportManager
-
- CURRENT_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- CURRENT_DENSITY_AREA - Static variable in class nxopen.cae.Result.Quantity
-
- CURRENT_LEVEL - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.MeasureHeightFrom
-
Measure from current level
- CURRENT_OBJECT - Static variable in class nxopen.ame.ExtractAttributeBuilder.Type
-
- CURRENT_PART_NAME - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.IdnameMethods
-
Use current part name for ID
- CURRENT_PART_NAME - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.ProgramNameMethods
-
Use current part name for program name
- CURRENT_PART_REVISION - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.RevMethods
-
Use current part revision
- CURRENT_PCS - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.DestPcsEnumType
-
Use current PCS as the destination
- CURRENT_SEGMENT - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.AppliedTo
-
- CURRENT_TOOL - Static variable in class nxopen.cam.CornerControlBuilder.SlowdownDistanceOptions
-
current tool
- CURRENT_VIEW - Static variable in class nxopen.features.CircularBlendCurveBuilder.CylinderDirectionOption
-
Current view method
- CURRENT_VIEW - Static variable in class nxopen.tooling.BlendCurve3DBuilder.BlendCurveOptions
-
Create blend curve by current view method
- CURRENT_WCS - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.CoordSys
-
World Coordinate System
- CURRENT_WCS - Static variable in class nxopen.tooling.MoldCsysBuilder.Wcsposition
-
current wcs position
- CURRENT_WORK_PART - Static variable in class nxopen.tooling.SubInsertBuilder.Types
-
The parent part is current work part
- currentActionType() - Method in interface nxopen.cae.qualityaudit.Manager
-
Returns the current quality audit action type.
- currentChild - Variable in class nxopen.uf.UFAssem.InstanceStatus
-
- currentComfortStudyName() - Method in interface nxopen.features.HumanBuilder
-
Returns the current study name of comfort analysis
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- currentDiscipline() - Method in interface nxopen.preferences.RoutingApplicationView
-
Returns the current discipline.
- currentDrawingSheet() - Method in interface nxopen.drawings.DrawingSheetCollection
-
Returns the currently opened drawing sheet.
- currentFeature() - Method in interface nxopen.Part
-
Returns the current feature.
- currentGroupIDColorIndex() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the group idcolor assigned
License requirements: None.
- currentholeshapepatternname - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- currentInterfaceUsageType() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the interface usage type of selected item
License requirements: None.
- currentInterfaceUsageTypeString() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the string of interface usage type of selected item
License requirements: None.
- currentItemIndex() - Method in interface nxopen.annotations.ListBusinessModifier
-
Returns the current item index
License requirements: None.
- currentlargeimagename - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData
-
- currentLevel() - Method in interface nxopen.options.ChangeList
-
Returns the current level of options
License requirements: None.
- currentLevel() - Method in interface nxopen.options.DraftingStandardChangeList
-
Returns the current level of options
License requirements: None.
- currentlySelectedStationItemName() - Method in interface nxopen.ame.ImportHWXmlBuilder
-
Returns the currently selected TIA station item name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- currentlySelectedSWBlockItemName() - Method in interface nxopen.ame.ImportHWXmlBuilder
-
Returns the currently selected TIA software block item name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- currentlySelectedTiaProjectName() - Method in interface nxopen.ame.ImportHWXmlBuilder
-
Returns the currently selected TIA project item name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- currentlySelectedTiaProjectPath() - Method in interface nxopen.ame.ImportHWXmlBuilder
-
Returns the currently selected TIA project item path
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- currentManikinSize() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the current manikin size string.
- currentMode() - Method in interface nxopen.issue.IssueManager
-
Returns the current mode
License requirements: None.
- currentMset() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Returns the machine set part which is the working part.
- currentNode() - Method in interface nxopen.blockstyler.Explorer
-
Returns the CurrentNode selected in the Navigation Tree.
- currentObjectAttributeBuilder() - Method in interface nxopen.ame.ExtractAttributeBuilder
-
Returns the current object attribute builder
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- currentObjectType() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the type of current object to be copied
License requirements: None.
- currentOption - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- currentParameterRuleType() - Method in interface nxopen.ame.CallMethodRuleBuilder
-
Returns the rule type of selected parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- currentSbfFile() - Method in interface nxopen.annotations.AnnotationManager
-
Returns the symbol font definition file.
- currentSectionAngle() - Method in interface nxopen.tooldesigner.ReusePieChartBuilder
-
Returns the rotate angle double
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- CURRENTSEGMENT - Static variable in class nxopen.cam.BoundaryTurnMemberCorner.AngleValueType
-
- currentSelectedPort() - Method in interface nxopen.routing.RunItemsBuilder
-
Returns the ports of FROM/TO item of the run.
- currentSite() - Method in interface nxopen.issue.IssueManager
-
Returns the current
IssueSite
License requirements: nx_issue_mgmt ("NX Issue Tracking")
Created in NX8.5.0
- currentSpecification() - Method in interface nxopen.preferences.RoutingApplicationView
-
Returns the current specification for the current discipline.
- currentStateEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the current feature state (nominal or actual)
License requirements: None.
- currentStep() - Method in interface nxopen.blockstyler.Wizard
-
Returns the CurrentStep.
- currentStep() - Method in interface nxopen.geometricutilities.PlayButtonsBuilder
-
Returns the step
License requirements: None.
- currentStep() - Method in interface nxopen.motion.AnimationControl
-
Returns the current animation step
License requirements: mechanisms ("MECHANISMS")
.
- currentstep - Variable in class nxopen.motion.ArticulationControl.ArticulationJointsDisplacementData
-
The current step index
- currentStepStatusAsString() - Method in interface nxopen.blockstyler.SpecifyPlane
-
Returns the string specifying current StepStatus
License requirements: None.
- currentString() - Method in interface nxopen.ReplaceExpressionsBuilder
-
Returns the current string.
- currentSubsetBuilder() - Method in interface nxopen.CollaborativeDesignCollection
-
Returns the
SubsetBuilder
used to edit the current subset in the
subset task environment
License requirements: assemblies ("ASSEMBLIES MODULE")
Created in NX8.5.0
- currentTile() - Method in interface nxopen.preferences.RoutingStock
-
Returns the current routing level/tile
License requirements: routing_base ("Routing Basic")
.
- currentValue - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- cursor - Variable in class nxopen.Selection.SelectObjectData
-
Absolute coordinates of cursor position.
- cursor - Variable in class nxopen.Selection.SelectTaggedObjectData
-
Absolute coordinates of cursor position.
- CURSOR_LOCATION - Static variable in class nxopen.cam.InspectionMeasurePointBuilder.PointTypes
-
Cursor Location
- cursorLocation() - Method in interface nxopen.blockstyler.SpecifyLocation
-
Returns the CursorLocation
License requirements: None.
- cursorTracking() - Method in interface nxopen.drawings.ViewWorkflowBuilder
-
Returns the cursor tracking enable XC/YC coordinates in dynamic input boxes when placing a view on a drawing
License requirements: None.
- CURV1CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Curvature unit: 1/cm
- CURV1FT - Static variable in class nxopen.cae.XyFunctionUnit
-
Curvature unit: 1/ft
- CURV1IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Curvature unit: 1/in
- CURV1M - Static variable in class nxopen.cae.XyFunctionUnit
-
Curvature unit: 1/m
- CURV1MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Curvature unit: 1/mm
- CURVATURE - Static variable in class nxopen.cae.XyFunctionMeasure
-
Curvature unit
- CURVATURE - Static variable in class nxopen.features.EdgeBlendBuilder.FaceContinuity
-
- CURVATURE - Static variable in class nxopen.features.GeometricConstraintData.AutoConstraintType
-
Curvature(G2)
- curvature() - Method in interface nxopen.features.GeometricConstraintData
-
Returns the curvature.
- CURVATURE - Static variable in class nxopen.features.MeshSurfaceBuilder.ConstraintType
-
Curvature
- CURVATURE - Static variable in class nxopen.features.SmoothSplineBuilder.Types
-
Curvature
- CURVATURE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.CalculationMethod
-
needle of curvature value
- CURVATURE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.LabelValues
-
label showing curvature value
- curvature - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Curvature of the Curve
- CURVATURE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.CalculationMethodType
-
Curvature
- CURVATURE - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.CalculationMethodType
-
Curvature
- CURVATURE - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.CalculationTypes
-
needle of curvature value
- CURVATURE - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.LabelValues
-
label showing curvature value
- CURVATURE - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.AnalysisTypes
-
Curvature
- curvature - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
point curvature
- CURVATURE - Static variable in class nxopen.motion.CurveParameterizedTypes
-
Curvature based type
- curvature - Variable in class nxopen.uf.UFSo.SplineData
-
- CURVATURE_ASYMMETRIC - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
-
this means curvature continuous asymmetric conic type
- CURVATURE_BASED - Static variable in class nxopen.facet.FillHoleBuilder.SmoothTypes
-
Smooth fill, boundary is based on facet body curvature.
- CURVATURE_DERIVATIVE - Static variable in class nxopen.features.GeometricConstraintData.AutoConstraintType
-
Curvature derivative(G3)
- CURVATURE_SYMMETRIC - Static variable in class nxopen.features.FaceBlendBuilder.CrossSectionOption
-
this means curvature continuous symmetric conic type
- CURVATURE_VARIATION - Static variable in class nxopen.features.SmoothSplineBuilder.Types
-
Curvature Variation
- curvatureAbstractionSetting() - Method in interface nxopen.cae.AutoHealGeometryBuilder
-
Returns the curvature abstraction option
License requirements: None.
- CurvatureBuilder - Interface in nxopen.facet
-
- curvatureCheck() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the curvature check
License requirements: None.
- curvatureColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the curvature color
License requirements: None.
- curvatureCombScaleFactor - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- curvatureDerivative() - Method in interface nxopen.features.GeometricConstraintData
-
Returns the curvature derivative.
- curvatureFactor() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the curvature factor
License requirements: None.
- curvatureFactor() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the curvature increase factor
License requirements: None.
- curvatureFactor() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the Curvature Increase Factor for points along the Scan Curve
License requirements: None.
- curvatureFactor() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the Curvature Increase Factor for points along the Scan Curve
License requirements: None.
- curvatureGeometry() - Method in interface nxopen.SketchG2Constraint
-
Returns the geometry supplying curvature for G2 constraint.
- curvatureSectionPlane() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the section curvature plane when sectional curvature values are to be computed and displayed.
- curvatureSensitivity() - Method in interface nxopen.facet.DetectPrimitivesBuilder
-
Returns the curvature sensitivity
License requirements: None.
- curvatureTolerance() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the curvature tolerance
License requirements: None.
- curvatureTolerance() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the curvature tolerance
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- curvatureTolerance() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- curvatureTolerance() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the curvature tolerance
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- curvatureTolerance() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the curvature tolerance
License requirements: nx_freeform_1 ("basic freeform modeling") OR features_modeling ("FEATURES MODELING")
.
- curvatureTolerance() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the curvature tolerance.
- curvatureTolerance() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the curvature tolerance.
- curvatureType() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the curvature type to compute and display.
- CURVE - Static variable in class nxopen.cae.AfuMathOperation.OuterInterpolation
-
Interpolates values with curve points
- curve() - Method in interface nxopen.cae.connections.CurveLocation
-
Returns the CURVE used for creating the location.
- CURVE - Static variable in class nxopen.cae.connections.LocationType
-
Curve
- curve() - Method in interface nxopen.cae.MeshPointOnCurveBuilder
-
Returns the node
License requirements: None.
- CURVE - Static variable in class nxopen.cae.optimization.Geometry
-
Curve
- CURVE - Static variable in class nxopen.cam.BoundaryTurnBlank.Type
-
- CURVE - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Curve
- CURVE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Curve Feature
- CURVE - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Curve
- curve() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the curve
License requirements: None.
- curve() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the curve
License requirements: None.
- CURVE - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Curve/Point
- Curve - Interface in nxopen
-
Represents a curve.
- CURVE - Static variable in class nxopen.die.CompensateRoughDataBuilder.Types
-
Curves being compensated.
- curve() - Method in interface nxopen.die.DieLimitsBuilder
-
Returns the curve used to set the limits.
- CURVE - Static variable in class nxopen.die.PadChildBuilder.ShapeTypeOption
-
Curve defined pad.
- CURVE - Static variable in class nxopen.die.PadParentBuilder.ShapeTypeOption
-
Curve defined pad.
- CURVE - Static variable in class nxopen.die.PierceHoleChildBuilder.ShapeTypeOption
-
curve defined hole
- CURVE - Static variable in class nxopen.features.AeroFlangeBuilder.GuideObjectTypes
-
Guide object is curve
- CURVE - Static variable in class nxopen.features.AeroRibBuilder.GuideObjectTypes
-
Guide object is curve
- curve() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the curve or edge.
- CURVE - Static variable in class nxopen.features.FitCurveBuilder.TargetSourceTypes
-
Curve
- CURVE - Static variable in class nxopen.features.GeodesicIntersectBuilder.Type
-
Curve.
- CURVE - Static variable in class nxopen.features.GeodesicProjectBuilder.Type
-
Curves.
- curve() - Method in interface nxopen.features.GeodesicTrimBuilder
-
Returns the curve to trim
License requirements: None.
- curve() - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilder
-
Returns the target curve
License requirements: None.
- CURVE - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
single curve or edge
- curve() - Method in interface nxopen.features.MirrorCurveBuilder
-
Returns the curves to mirror
License requirements: None.
- CURVE - Static variable in class nxopen.features.OffsetEmbossBuilder.Types
-
This stands for curve case.
- CURVE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
Curve or edge
- curve() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the curve
License requirements: None.
- CURVE - Static variable in class nxopen.features.ShelfBuilder.ReferenceType
-
- CURVE - Static variable in class nxopen.features.shipdesign.DisplaySolidBuilder.DisplayOptionTypes
-
- CURVE - Static variable in class nxopen.features.shipdesign.OrientationPointMethodsBuilder.MeasureAlongTypes
-
The distance is measured along the landing curve.
- CURVE - Static variable in class nxopen.features.shipdesign.PlateBoundaryOptionBuilder.BoundaryTypes
-
use
Curve
as the boundary.
- CURVE - Static variable in class nxopen.features.shipdesign.SplitStandardPartBuilder.ToolTypes
-
Curve
- curve() - Method in interface nxopen.features.SmoothSplineBuilder
-
Returns the curve
License requirements: None.
- CURVE - Static variable in class nxopen.features.StepBuilder.ReferenceBoundaryTypes
-
Select section curves as reference boundary object
- curve() - Method in interface nxopen.features.StudioSplineBuilder
-
- curve() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the spline curve
License requirements: None.
- CURVE - Static variable in class nxopen.features.StyledBlendBuilder.Types
-
Curve type
- CURVE - Static variable in class nxopen.features.vehicledesign.AllAroundVisionBuilder.WindowTypes
-
Curve Object for Windows.
- CURVE - Static variable in class nxopen.features.vehicledesign.BumperPendulumBuilder.VisualizationType
-
- CURVE - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.VisualizationType
-
- CURVE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.VisualizationTypes
-
- CURVE - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.VisualizationType
-
- CURVE - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.VisualizationType
-
- CURVE - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.VisualizationType
-
- CURVE - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.VisualizationType
-
Curve
- curve() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
- CURVE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationModes
-
along curve and distance
- CURVE - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionAlignments
-
curve
- curve() - Method in interface nxopen.geometricutilities.ModlAlongCurveAngle
-
Returns the curve on which doing the transform.
- CURVE - Static variable in class nxopen.geometricutilities.SpineDefinitionBuilder.MethodOptions
-
Spine by curve or a profile
- CURVE - Static variable in class nxopen.HumanPosturePredictionBuilder.SteeringWheelPedalType
-
Use curve steering wheel or pedal
- CURVE - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point on curve
- CURVE - Static variable in class nxopen.mechatronics.CamBuilder.CreateCamDiskType
-
Curve
- curve() - Method in interface nxopen.motion.LinkCouplerBuilder
-
Returns the coupling curve function
License requirements: mechanisms ("MECHANISMS")
.
- CURVE - Static variable in class nxopen.motion.SplineBeamBuilder.DefinitionMethodType
-
Curve
- CURVE - Static variable in class nxopen.tooling.CalculateAreaBuilder.SheetMethodType
-
Using projected curve method to create the sheet body.
- CURVE - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.BlankOption
-
Select several curves to create a blank.
- curve - Variable in class nxopen.uf.UFMotion.PointCurveConstraint
-
- curve - Variable in class nxopen.uf.UFSo.OffsetCurveCvtrData
-
- curve() - Method in interface nxopen.UFSession
-
- curve() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the joint curve
License requirements: None.
- CURVE - Static variable in class nxopen.weld.WeldFillBuilder.BoundaryMethodType
-
Boundary defined by a curve.
- CURVE - Static variable in class nxopen.weld.WeldSelectionType
-
curve
- curve1() - Method in interface nxopen.features.CombinedProjectionBuilder
-
Returns the combined projection curve1
License requirements: None.
- CURVE1 - Static variable in class nxopen.features.OvercrownBuilder.TransitionType
-
- curve1() - Method in interface nxopen.features.TrimCornerBuilder
-
Returns the curve1
License requirements: None.
- curve1 - Variable in class nxopen.uf.UFMotion.CurveCurveConstraint
-
- curve1 - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- curve2() - Method in interface nxopen.features.CombinedProjectionBuilder
-
Returns the combined projection curve2
License requirements: None.
- CURVE2 - Static variable in class nxopen.features.OvercrownBuilder.TransitionType
-
- curve2() - Method in interface nxopen.features.TrimCornerBuilder
-
Returns the curve2
License requirements: None.
- curve2 - Variable in class nxopen.uf.UFMotion.CurveCurveConstraint
-
- curve2 - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- CURVE_ALIGNED - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.AlignmentType
-
The cutting planes are perpendicular to specified curves
- CURVE_ALL - Static variable in class nxopen.uf.UFBrep.GeomType
-
- CURVE_ALONG_CURVE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Constraint
-
Curve along Curve Constraint, used for complete unform only
- CURVE_ALONG_CURVE - Static variable in class nxopen.features.sheetmetal.SMBoundaryConditionBuilder.ConstraintTypes
-
- CURVE_AND_SOLID - Static variable in class nxopen.features.shipdesign.DisplaySolidBuilder.DisplayOptionTypes
-
- CURVE_BETWEEN_INTERSECTION - Static variable in class nxopen.Section.DeselectOption
-
Portion of curve between intersection
- CURVE_COLLECTOR - Static variable in class nxopen.features.MatchedReferenceBuilder.Types
-
curve collector or edge collector
- CURVE_CUT_RANGE - Static variable in class nxopen.cam.CAMObject.Attr
-
- CURVE_DEFINED - Static variable in class nxopen.features.GlobalShapingBuilder.OffsetMethod
-
Curve interpolated
- CURVE_DEFINED - Static variable in class nxopen.features.GlobalShapingBuilder.RotationMethod
-
Curve interpolated rotation
- CURVE_DUMB - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- CURVE_FEATURE - Static variable in class nxopen.features.PartGeometryCopyBuilder.Type
-
Curve-based feature
- CURVE_FEATURE - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- CURVE_FEATURE_CHAIN - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- CURVE_FEATURE_TANGENT - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- CURVE_GROUP - Static variable in class nxopen.SelectionIntentRule.RuleType
-
- CURVE_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
-
- CURVE_MESH - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Create curve mesh surface.
- CURVE_MESH - Static variable in class nxopen.die.AddSurfBuilder.Methods
-
Modeling curve mesh.
- CURVE_MESH - Static variable in class nxopen.MeshParameterData.FeatureType
-
- CURVE_MESH_ALONG_DRIVER_NORMALS - Static variable in class nxopen.uf.UFModl.QuiltType
-
- CURVE_MESH_ALONG_FIXED_VECTOR - Static variable in class nxopen.uf.UFModl.QuiltType
-
- CURVE_MESH_INQUIRE_ERROR - Static variable in class nxopen.uf.UFConstants
-
- CURVE_NOT_THEO_TANG - Static variable in class nxopen.uf.UFConstants
-
- CURVE_NUMBER - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.EvaluationModes
-
along curve and number
- CURVE_ON_CURVE_CONSTRAINT_DRIVER - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- CURVE_OR_FACE_AXIS - Static variable in class nxopen.features.DatumAxisBuilder.Types
-
Datum axis at the curve or face axis
- CURVE_PATTERN - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.Types
-
non planar curve type
- CURVE_PERCENTAGE - Static variable in class nxopen.features.PointSetBuilder.CurvePointsType
-
A point will be created at given curve percentage.
- CURVE_PLANE - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.ProjectionTypes
-
best fit plane
- CURVE_POINT - Static variable in class nxopen.PlaneTypes.MethodType
-
On curve through point method
- CURVE_POINT - Static variable in class nxopen.Sketch.AssocType
-
A point on a spline
- CURVE_POINT - Static variable in class nxopen.uf.UFSket.AssocType
-
- CURVE_POINTS - Static variable in class nxopen.features.PointSetBuilder.Types
-
Create points along curve.
- CURVE_SCAN - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Scan Curve
- CURVE_SCAN5AXIS - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
5-axis Scan Curve
- CURVE_SURFACE - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.VisualizationType
-
- CURVE_TAPERED - Static variable in class nxopen.features.EmbossSidewall.SidewallMethod
-
Indicates method to calculate tapered sidewall faces with reference to the taper direction.
- CURVE_TO_CURVE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Constraint
-
Curve to Curve Constraint, used for intermediate unform only
- CURVE_TO_CURVE - Static variable in class nxopen.features.sheetmetal.SMBoundaryConditionBuilder.ConstraintTypes
-
- CURVE_TO_CURVE - Static variable in class nxopen.geometricanalysis.DeviationChecking.Types
-
check
curve/edge to curve/edge deviation
- CURVE_TO_FACE - Static variable in class nxopen.geometricanalysis.DeviationChecking.Types
-
check curve/edge
to face deviation
- CURVE_VIEW - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.SectionAlignments
-
curve in view
- curveAligned() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder
-
Returns the Curve Aligned section specification.
- CurveAlignedBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
-
- CurveAnalysisCombsBuilder - Interface in nxopen.geometricanalysis
-
- CurveAnalysisCombsBuilder.DirectionOptionType - Class in nxopen.geometricanalysis
-
Deprecated.
Direction option types
- CurveAnalysisDisplay - Interface in nxopen.geometricanalysis
-
Represents a tool to control whether to show a curve's poles,knots,combs,peaks and inflections
To obtain an instance of this class, refer to
AnalysisObjectCollection
Created in NX6.0.0
- CurveAnalysisDisplay.ShowFlagType - Class in nxopen.geometricanalysis
-
- curveAnalysisDisplayObject() - Method in interface nxopen.geometricanalysis.AnalysisObjectCollection
-
Returns object for displaying curve analysis information .
- CurveAnalysisInflectionsBuilder - Interface in nxopen.geometricanalysis
-
- CurveAnalysisInflectionsBuilder.DirectionOptionType - Class in nxopen.geometricanalysis
-
Deprecated.
Direction option types
- CurveAnalysisPeaksBuilder - Interface in nxopen.geometricanalysis
-
- CurveAnalysisPeaksBuilder.DirectionOptionType - Class in nxopen.geometricanalysis
-
Deprecated.
Direction option types
- CurveAnalysisRecord - Interface in nxopen.geometricanalysis
-
- CurveAnalysisRecord.DirectionOptionType - Class in nxopen.geometricanalysis
-
Deprecated.
Direction option types
- CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.BumperPendulumBuilder.VisualizationType
-
- CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.VisualizationTypes
-
- CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.InnerAngleBuilder.VisualizationType
-
- CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.VisualizationType
-
- CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.SlopeBuilder.VisualizationType
-
- CURVEAND_SURFACE - Static variable in class nxopen.features.vehicledesign.StaticCurbBuilder.VisualizationType
-
Curves and Surface
- curveAngularTolerance - Variable in class nxopen.facet.FacetingParameters
-
This is the maximum angular variation
in radians of the curve tangent along
the curve segment represented by the
facet edge.
- curveAngularTolerance - Variable in class nxopen.uf.UFFacet.Parameters
-
- curveBlend() - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Returns the curves to blend.
- curveBoundaries() - Method in interface nxopen.annotations.BoundaryBuilder
-
Returns the curve boundaries
License requirements: None.
- curveBoundary() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the curve boundary, which can be a single region or multiple regions.
- curveChain() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the curve chain
License requirements: None.
- CurveChainRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects end-to-end connected curves from the seed curve.
- CurveChainRule.Data - Class in nxopen
-
- curveCnt - Variable in class nxopen.uf.UFCurve.AskIsoclineData
-
- CurveCollection - Interface in nxopen
-
Represents a collection of
Curve
.
- CurveCollector - Interface in nxopen.blockstyler
-
Represents a Curve Collector .
- curveCollector() - Method in interface nxopen.die.CompensateRoughDataBuilder
-
Returns the curve collector containing the curves that will be approximated.
- curveCollector() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the curve collector
License requirements: None.
- curveColor() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the curve color.
- curveColor() - Method in interface nxopen.preferences.PartSketch
-
Returns the sketch curve color
License requirements: None.
- curveColorOption() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the curve color option
License requirements: None.
- CurveContact - Interface in nxopen.motion
-
- CurveContactAdams - Interface in nxopen.motion
-
- CurveContactBuilder - Interface in nxopen.motion
-
- CurveContactBuilder.GeometryMaterialSide - Class in nxopen.motion
-
the enum for the materia side direction of the selected geometry
- CurveContactCollection - Interface in nxopen.motion
-
Represents a collection of 2D contact objects.Any 2D contact object must
be created and found through this class
To obtain an instance of this class, refer to
MotionManager
Created in NX5.0.0
- CurveContactRecurdyn - Interface in nxopen.motion
-
- curveContacts() - Method in interface nxopen.motion.MotionManager
-
- CurveContinuity - Interface in nxopen.geometricanalysis
-
Represents a Curve Continuity Analysis builder
To create or edit an instance of this class, use
CurveContinuityBuilder
Created in NX7.0.0
- CurveContinuityBuilder - Interface in nxopen.geometricanalysis
-
- CurveContinuityBuilder.Type - Class in nxopen.geometricanalysis
-
Define curve continuity types
- curveControl() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the curve control
License requirements: None.
- curveCount() - Method in interface nxopen.features.shipdesign.TraceLinesBuilder
-
Returns the curve count
License requirements: None.
- curveCount - Variable in class nxopen.uf.UFDraw.AskCurveGroupMembersData
-
- curveCount - Variable in class nxopen.uf.UFDraw.SetBoundaryAssocData
-
- CurveCurvatureAnalysis - Interface in nxopen.geometricanalysis
-
- CurveCurvatureAnalysisBuilder - Interface in nxopen.geometricanalysis
-
- CurveCurvatureAnalysisBuilder.CalculationMethod - Class in nxopen.geometricanalysis
-
Enumeration for needle calculation method
- CurveCurvatureAnalysisBuilder.DisplayStyle - Class in nxopen.geometricanalysis
-
Enumeration for needle display type
- CurveCurvatureAnalysisBuilder.LabelValues - Class in nxopen.geometricanalysis
-
Enumeration for label computation method
- CurveCurvatureAnalysisBuilder.NeedleDirection - Class in nxopen.geometricanalysis
-
Enumeration for needle direction type
- CurveCurvatureAnalysisBuilder.ProjectionTypes - Class in nxopen.geometricanalysis
-
Projection plane types
- CurveCurvatureAnalysisBuilder.XyzTypes - Class in nxopen.geometricanalysis
-
Enumeration for X, Y or Z projection plane
- curveCurvatureDisplay() - Method in interface nxopen.preferences.PartModeling
-
Returns the curve curvature display.
- curveCurvatureShowCap() - Method in interface nxopen.preferences.PartModeling
-
Returns the curve curvature display show cap line
License requirements: None.
- curveCurvatureStyle() - Method in interface nxopen.preferences.PartModeling
-
Returns the curve curvature display style
License requirements: None.
- CurveCurveConstraint() - Constructor for class nxopen.uf.UFMotion.CurveCurveConstraint
-
- CurveCurveConstraint(String, int, Tag[], int, Tag[]) - Constructor for class nxopen.uf.UFMotion.CurveCurveConstraint
-
- CURVED - Static variable in class nxopen.cae.ElementModifyOrderBuilder.Midnode
-
curved midnodes
- CURVED - Static variable in class nxopen.cae.MappedMeshBuilder.MidNodeType
-
Curved Option
- CurveData() - Constructor for class nxopen.facet.FacetedEdge.CurveData
-
- CurveData() - Constructor for class nxopen.motion.GraphBuilder.CurveData
-
Deprecated.
- CurveData(NXObject, int, int, int) - Constructor for class nxopen.motion.GraphBuilder.CurveData
-
Deprecated.
Constructor for the CurveData object.
- curveDirectionOption() - Method in interface nxopen.geometricutilities.BridgeCurveConnectivity
-
Returns the curve direction option
License requirements: None.
- CurveDisplaySettings - Interface in nxopen.cae.xyplot
-
Represents the curve display style.
- curveDistanceTolerance - Variable in class nxopen.facet.FacetingParameters
-
This is the maximum distance between
the facet edge and the curve segment
represented by the facet edge.
- curveDistTolerance - Variable in class nxopen.uf.UFFacet.Parameters
-
- curvedMetallicPanelCompressiveBucklingCoefficient(double, double, double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Curves for finding 'kc' the compressive-buckling coefficient for curved sheet panel
This curve is extracted from Bruhn manual, figure C9.1
Used for finding 'kc' the compressive-buckling coefficient for curved sheet panel, with
simply-supported edges.
- CurvedMetallicPanelCompressiveBucklingCoefficientData() - Constructor for class nxopen.cae.aerostructures.author.ABB.CurvedMetallicPanelCompressiveBucklingCoefficientData
-
- curvedMetallicPanelShearBucklingCoefficient(double, double, double, double, double, ABB.EdgeSupportType) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Curves for finding 'ks' the shear-buckling coefficient for curved sheet panel
These curves are extracted from Bruhn manual, figures C9.2 to C9.5
Used for finding 'ks' the shear-buckling coefficient for curved sheet panel, with
simply-supported or clamped edges.
- CurvedMetallicPanelShearBucklingCoefficientData() - Constructor for class nxopen.cae.aerostructures.author.ABB.CurvedMetallicPanelShearBucklingCoefficientData
-
- CurveDumbRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects curves without any intent i.e. as if collected with Single Curve rule.
- curveEid - Variable in class nxopen.uf.UFCurve.SectionPerpcrvData
-
- curveEndOption() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the end of the curve that would be trimmed
License requirements: None.
- curveEqualNext - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
if the segment curvature equal with the next segment
- curveEqualPrev - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
if the segment curvature equal with the previous segment
- CurveExtendData - Interface in nxopen.geometricutilities
-
- CurveExtendData.LimitOptions - Class in nxopen.geometricutilities
-
Represents the curve extend options for associative basic curves
- CurveExtensionBuilder - Interface in nxopen.geometricutilities
-
Spline extension builder class.
- CurveExtensionBuilder.ExtensionOption - Class in nxopen.geometricutilities
-
Spline extension options
- curveExtensionOption() - Method in interface nxopen.features.TrimCurve2Builder
-
Returns the curve extension option
License requirements: None.
- curveExtensionType() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the shape of the extension, if the curve to be trimmed is to be extended
to its bounding object(s)
License requirements: None.
- CurveFeature - Interface in nxopen.features
-
Represents a curve feature
This is an abstract class, and cannot be instantiated.
- curveFeature() - Method in interface nxopen.features.PartGeometryCopySelectBuilder
-
Returns the curve feature
License requirements: None.
- CurveFeatureChainRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects end-to-end connected curves from the feature of the seed.
- CurveFeatureChainRule.Data - Class in nxopen
-
- CurveFeatureCollection - Interface in nxopen.features
-
Manages curve features.
- curveFeatureCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the CurveFeatureCollection instance belonging to this part .
- CurveFeatureRule - Interface in nxopen
-
- CurveFeatureTangentRule - Interface in nxopen
-
Represents a
SelectionIntentRule
that collects tangent connected curves from the feature of the seed.
- CurveFeatureTangentRule.Data - Class in nxopen
-
- curveFile() - Method in interface nxopen.presslinesimulation.MotionCurvesBuilder
-
Returns the motion curve file.
- curveFinder() - Method in interface nxopen.features.LocalScaleCurveBuilder
-
Returns the curve finder
License requirements: None.
- curveFinder() - Method in interface nxopen.features.MoveCurveBuilder
-
Returns the curve section
License requirements: None.
- curveFinder() - Method in interface nxopen.features.OffsetMoveCurveBuilder
-
Returns the curve finder
License requirements: None.
- curveFinder() - Method in interface nxopen.features.ResizeCurveBuilder
-
Returns the curve section
License requirements: None.
- CurveFinderBuilder - Interface in nxopen.features
-
Represents a collection of curves and their relationships to other curves in the model .
- curveFit() - Method in interface nxopen.features.CombinedProjectionBuilder
-
Returns the combined projection curveFit
License requirements: None.
- curveFitData() - Method in interface nxopen.features.AOCSBuilder
-
Returns the curve fit settings
License requirements: solid_modeling ("SOLIDS MODELING")
.
- curveFitData() - Method in interface nxopen.features.BridgeCurveBuilder
-
- curveFitData() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the curve fitting parameters
License requirements: None.
- curveFitData() - Method in interface nxopen.features.CombinedProjectionBuilder
-
Returns the combined projection Curve Fit Data
License requirements: None.
- curveFitData() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the curve fit data
License requirements: None.
- curveFitData() - Method in interface nxopen.features.CurveOnSurfaceBuilder
-
Returns the curve fitting parameters
License requirements: None.
- curveFitData() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the curve fit settings
License requirements: None.
- curveFitData() - Method in interface nxopen.features.IsoclineCurveBuilder
-
Returns the curve fitting parameters
License requirements: None.
- curveFitData() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the curve fit data
License requirements: None.
- curveFitData() - Method in interface nxopen.features.Offset3DCurveBuilder
-
Returns the curve fit settings
License requirements: None.
- curveFitData() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the curve fit settings
License requirements: None.
- curveFitData() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the curve fit settings
License requirements: None.
- curveFitData() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the curve fit settings
License requirements: None.
- curveFitData() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the curve fitting for curves if the user specifies merge curves.
- CurveFitData - Interface in nxopen.geometricutilities
-
Represents the curve fitting methods options.
- curveFitData() - Method in interface nxopen.geometricutilities.CurveSettings
-
Returns the curve fit data
License requirements: None.
- curveFitData - Variable in class nxopen.uf.UFCurve.Proj1
-
- curveFitData - Variable in class nxopen.uf.UFCurve.SectionGeneralData
-
- CurveFitData() - Constructor for class nxopen.uf.UFModl.CurveFitData
-
- CurveFitData(int, int, int) - Constructor for class nxopen.uf.UFModl.CurveFitData
-
- CurveFitData.Join - Class in nxopen.geometricutilities
-
Represents the curve join method
- CurveFitData.Method - Class in nxopen.geometricutilities
-
Represents the curve fitting method in the case of advanced fitting
- CurveFitJoin - Interface in nxopen.geometricutilities
-
Represents the curve fit join data
.
- CurveFitJoin.JoinMethod - Class in nxopen.geometricutilities
-
Represents the curve join method
- curveFitJoinData() - Method in interface nxopen.features.AOCSBuilder
-
- curveFitJoinData() - Method in interface nxopen.features.ProjectCurveBuilder
-
- curveFitJoinOptions() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the curve fit join option
License requirements: None.
- curveFitMethod() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
Returns the curve fit method as
CurveFitOptions
License requirements: None.
- curveFitMethod() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the curve fit method
License requirements: None.
- curveFitMethod() - Method in interface nxopen.preferences.SessionModeling
-
Returns the curve fit method.
- curveFitMethod() - Method in interface nxopen.SketchIntersectionCurveBuilder
-
Returns the curve fit method
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- curveFitMethod - Variable in class nxopen.uf.UFModl.CurveFitData
-
- curveFitMethodUpdated() - Method in interface nxopen.SketchIntersectionCurveBuilder
-
This method needs to be called whenever the curve fit options changes
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- curveFitOption() - Method in interface nxopen.features.BridgeCurveBuilder
-
- curveFitOptions() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the curve fit options
License requirements: solid_modeling ("SOLIDS MODELING")
.
- curveFitOptions() - Method in interface nxopen.geometricutilities.CurveFitJoin
-
Returns the curve fit options
License requirements: None.
- CurveFitOptions - Interface in nxopen.geometricutilities
-
Represents the curve fit data
.
- CurveFitOptions.FitMethod - Class in nxopen.geometricutilities
-
Represents the curve fit method
- curveFitProperties() - Method in interface nxopen.features.CurveOnSurfaceBuilder
-
Returns the curve fit properties
License requirements: solid_modeling ("SOLIDS MODELING")
.
- curveForPerpendicularPlane() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the curve for perpendicular to curve type
License requirements: None.
- CurveGroupRule - Interface in nxopen
-
- curveItem() - Method in interface nxopen.cam.DriveChainItemBuilder
-
Returns the curve item
License requirements: cam_base ("CAM BASE")
.
- curveJoinMethod() - Method in interface nxopen.geometricutilities.CurveFitData
-
Returns the curve join method
License requirements: None.
- curveJoinMethod() - Method in interface nxopen.geometricutilities.CurveFitJoin
-
Returns the curve join method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- curveLength() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the curve length builder
License requirements: None.
- curveLength() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the curve length builder
License requirements: None.
- CurveLength - Interface in nxopen.features
-
Represents a curve length feature.
- CurveLengthBuilder - Interface in nxopen.features
-
- CurveLengthBuilder - Interface in nxopen.geometricutilities
-
- CurveLengthBuilder.EndObjectType - Class in nxopen.geometricutilities
-
This attribute represents end type
- curvelengthData() - Method in interface nxopen.features.CurveLengthBuilder
-
Returns the curvelength data
License requirements: solid_modeling ("SOLIDS MODELING")
.
- curveLengthData() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the curve length data
License requirements: None.
- CurveLengthData - Interface in nxopen.geometricutilities
-
Represents an CurveLength data.
- CurveLengthDimensionBuilder - Interface in nxopen.annotations
-
- CurveLimitsData - Interface in nxopen.geometricutilities
-
- curveLineArc() - Method in interface nxopen.UFSession
-
- curveList() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the list of curves with the pick points
License requirements: None.
- curveList() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the selected curve list.
- curveList() - Method in interface nxopen.SketchProjectBuilder
-
Returns the curve list.
- curveList() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the curve list served for boundary+sketch or close boundaries method
License requirements: None.
- curveList - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData
-
- CurveLocation - Interface in nxopen.cae.connections
-
Location interface.
- curveMaximumLength - Variable in class nxopen.facet.FacetingParameters
-
The maximum length of a curve, default is 1000.0
- curveMaxLength - Variable in class nxopen.uf.UFFacet.Parameters
-
- curveMode() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the curve specification mode
License requirements: None.
- curveMode() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the curve specification mode
License requirements: None.
- curveName() - Method in interface nxopen.cae.QueryCurveBuilder
-
Returns the curve name
License requirements: nx_masterfem ("Finite Element Modeling")
.
- curveOffset() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the curve offset
License requirements: None.
- curveOffsetType() - Method in interface nxopen.features.AOCSBuilder
-
Returns the curve offset type
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- CurveOnCurve - Interface in nxopen.motion
-
Represents a curve on curve
To create or edit an instance of this class, use
CurveOnCurveBuilder
Created in NX6.0.0
- CurveOnCurveBuilder - Interface in nxopen.motion
-
- CurveOnCurveCollection - Interface in nxopen.motion
-
Represents a collection of curve on curve objects
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- CurveOnCurveJoint - Interface in nxopen.mechatronics
-
Represents the CurveOnCurve Joint.
- CurveOnCurveJointBuilder - Interface in nxopen.mechatronics
-
- CurveOnCurveJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of CurveOnCurve Joint.
- curveOnCurveJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- curveOnCurves() - Method in interface nxopen.motion.MotionManager
-
- CurveOnSurface - Interface in nxopen.features
-
Represents a curve on surface feature
To create or edit an instance of this class, use
CurveOnSurfaceBuilder
Created in NX5.0.0
- CurveOnSurfaceBuilder - Interface in nxopen.features
-
Curve On Surface builder class.
- curveOptions() - Method in interface nxopen.features.CombinedProjectionBuilder
-
Returns the combined projection curveOptions
License requirements: None.
- curveOptions() - Method in interface nxopen.features.CurveLengthBuilder
-
Returns the CurveOptions
License requirements: solid_modeling ("SOLIDS MODELING")
.
- curveOptions() - Method in interface nxopen.features.JoinCurvesBuilder
-
Returns the Curve Options.
- curveOptions() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the curve options.
- curveOptions() - Method in interface nxopen.features.TrimCurve2Builder
-
Returns the Curve Options
License requirements: None.
- curveOptions() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the Curve Options
License requirements: None.
- CurveOptions - Interface in nxopen.geometricutilities
-
Represents the curve options data
.
- CurveOptions.InputCurve - Class in nxopen.geometricutilities
-
Represents the input curve options
- curveOrFace() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the curve or face .
- curveOrientation() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the orientation of vector on a curve.
- curveParameterizedType() - Method in interface nxopen.motion.PointOnCurveBuilder
-
Returns the curve parameterized type
License requirements: None.
- CurveParameterizedTypes - Class in nxopen.motion
-
Defines curve parameterized type
- CurveParameterType - Class in nxopen
-
Specifies curve parameter type as arc length or percent arc length
- curveParm - Variable in class nxopen.uf.UFCurve.IntersectInfo
-
- curvePercentage() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the percentage value of curve
License requirements: None.
- curvePercentageList() - Method in interface nxopen.features.PointSetBuilder
-
Returns the curve percentage list.
- curvePnt - Variable in class nxopen.uf.UFModlGeneral.AskCurveParmData
-
- curvePoint - Variable in class nxopen.uf.UFCurve.IntersectInfo
-
- curvePointList() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns the curve and point collector
License requirements: None.
- curvePoints() - Method in interface nxopen.drawings.ViewProjectionBuilder
-
Returns the curve and points
License requirements: None.
- curvePointsBy() - Method in interface nxopen.features.PointSetBuilder
-
Returns the curve points definition setting.
- curveProfile() - Method in interface nxopen.motion.LinkCouplerBuilder
-
Returns the profile
License requirements: mechanisms ("MECHANISMS")
.
- curveProjectMethod - Variable in class nxopen.uf.UFModl.TrimObject
-
- curveRange() - Method in interface nxopen.features.SmoothSplineBuilder
-
Returns the curve range
License requirements: None.
- curveRange() - Method in interface nxopen.features.StudioXformBuilder
-
- curveRange() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the curve range
License requirements: None.
- curveRange() - Method in interface nxopen.geometricanalysis.CurveAnalysisCombsBuilder
-
- CurveRangeBuilder - Interface in nxopen.geometricutilities
-
Represents the curve range and anchor builder .
- CurveRangeBuilder.AnchorPositionType - Class in nxopen.geometricutilities
-
Represents the anchor position type
- curveRangeControl() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the curve range
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- curveRefs - Variable in class nxopen.uf.UFCurve.AskProjCurvesData
-
- curveRules() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the CurveRules
License requirements: None.
- curveRules() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the CurveRules
License requirements: None.
- curveRules() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the CurveRules
License requirements: None.
- curveRules() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the CurveRules
License requirements: None.
- CURVES - Static variable in class nxopen.annotations.BoundaryBuilder.SelectionMethod
-
Select boundaries by selecting curves
- curves() - Method in interface nxopen.BasePart
-
Returns the CurveCollection instance belonging to this part .
- CURVES - Static variable in class nxopen.cae.DisplaySectionType
-
- CURVES - Static variable in class nxopen.cam.InspectionPatternFeatureBuilder.FeatureFilterTypes
-
Only curve inspection features will be listed
- CURVES - Static variable in class nxopen.cam.Preferences.BlankSelectionTypes
-
Deprecated.
Curves
- CURVES - Static variable in class nxopen.cam.Preferences.CheckSelectionTypes
-
Deprecated.
Curves
- CURVES - Static variable in class nxopen.cam.Preferences.PartSelectionTypes
-
Deprecated.
Curves
- CURVES - Static variable in class nxopen.cam.Preferences.SelectionTypes
-
curves
- CURVES - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.EndPositionTypes
-
Curves
- curves() - Method in interface nxopen.die.UncutRegionsBuilder
-
Returns the curves to check for uncut regions.
- CURVES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide curves
- curves() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the select curves for source group
License requirements: None.
- CURVES - Static variable in class nxopen.DxfdwgImporter.ImportCurvesAs
-
Convert curves as curves
- curves - Variable in class nxopen.FaceRegionBoundaryRule.Data
-
Curves input to create this rule
- CURVES - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.Type
-
- curves - Variable in class nxopen.features.shipdesign.StiffenerBuilder.CreatePathData
-
The curves defining the path of the profile that is being oriented.
- curves() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the curves selected that define the path of the stiffener system.
- CURVES - Static variable in class nxopen.features.shipdesign.StiffenerSystemBuilder.Types
-
- curves() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the curves to be made continuous.
- curves() - Method in interface nxopen.features.WrapBuilder
-
Returns the curves that are being wrapped or unwrapped.
- curves() - Method in interface nxopen.geometricanalysis.sectionanalysis.CurveAlignedBuilder
-
Returns the curves
License requirements: None.
- curves - Variable in class nxopen.Measurement.ArcLengthBetweenPointsData
-
The curves of the shortest path
- curves() - Method in interface nxopen.motion.SplineBeamBuilder
-
Returns the optional curves object
License requirements: mechanisms ("MECHANISMS")
.
- curves() - Method in interface nxopen.ObjectTypeSelector
-
Returns the curves - This should be set to true if curves are desired in the output file
License requirements: None.
- curves - Variable in class nxopen.RegionBoundaryRule.Data
-
Curves input to create this rule
- CURVES - Static variable in class nxopen.Selection.SelectionType
-
Filter to select all curve types
- curves() - Method in interface nxopen.SketchCornerBuilder
-
Returns the curves to make a corner
License requirements: None.
- curves - Variable in class nxopen.uf.UFCurve.AskIsoclineData
-
- curves - Variable in class nxopen.uf.UFCurve.CreateSilhouetteData
-
- curves - Variable in class nxopen.uf.UFDraw.AskCurveGroupMembersData
-
- curves - Variable in class nxopen.uf.UFDraw.BreakoutData
-
- curves - Variable in class nxopen.uf.UFGdt.AskTagsData
-
- curves - Variable in class nxopen.uf.UFGdt.TargetUdefArea
-
- curves - Variable in class nxopen.uf.UFModeling.AskSubdivFaceParmsData
-
- curves - Variable in class nxopen.uf.UFModl.SmcutoutData
-
- curves - Variable in class nxopen.uf.UFModl.SmpunchCutSets
-
- curves - Variable in class nxopen.uf.UFModl.SmpunchData
-
- curves - Variable in class nxopen.uf.UFRoute.AskCrossCurvesData
-
- CURVES - Static variable in class nxopen.weld.WeldFeatureOutput
-
Output only curves
- curves - Variable in class nxopen.weld.WeldJointBuilder.NewlyCreatedJointsData
-
- CURVES_AND_EDGES - Static variable in class nxopen.blockstyler.SelectObject.FilterType
-
Filter to select all curve and edge types
- CURVES_AND_EDGES - Static variable in class nxopen.Selection.SelectionType
-
Filter to select all curve and edge types
- CURVES_AND_POINTS - Static variable in class nxopen.Section.AllowTypes
-
Allow both points and curves in section
- CURVES_EDGES - Static variable in class nxopen.tooling.FaceSplitBuilder.FaceSplitType
-
using curve or edge for Split Face
- CURVES_HAVE_GAPS - Static variable in class nxopen.uf.UFConstants
-
- CURVES_NOT_END_TO_END - Static variable in class nxopen.uf.UFConstants
-
- CURVES_NOT_PLANAR - Static variable in class nxopen.uf.UFConstants
-
- CURVES_ON_FACES - Static variable in class nxopen.features.TextBuilder.OnFacePlacementMethodOptions
-
Placement on curves or edges on the faces
- CURVES_ON_SURFACES - Static variable in class nxopen.features.SmoothCurveStringBuilder.Types
-
- CURVES_ONLY - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Display
-
- CURVES_ONLY - Static variable in class nxopen.preferences.SessionDrafting.EdgeFaceDisplayType
-
- CURVES_PLANES_SHIP - Static variable in class nxopen.features.shipdesign.SeamBuilder.DefinitionMethods
-
Can use curves, planes or other ship structure to define the seam location.
- CURVES_TO_COPY - Static variable in class nxopen.drawings.ViewCopyTo3dBuilder.BoundingBoxOption
-
curves to copy
- curveScan() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns a flag to indicate if scan curve is allowed
License requirements: None.
- curveSection() - Method in interface nxopen.features.CurveFinderBuilder
-
- curveSectionBuilder() - Method in interface nxopen.linedesigner.CreateFenceBuilder
-
Returns the curve section builder is return
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- curveSelection() - Method in interface nxopen.mfg.am.SupportBuilder
-
Returns the curve selection
License requirements: None.
- curveSelection() - Method in interface nxopen.routing.ConnectedCurvesBuilder
-
Returns the list of selected curves.
- curveSet - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- curveSettings() - Method in interface nxopen.features.ScaleCurveBuilder
-
Returns the curve setting data
License requirements: None.
- CurveSettings - Interface in nxopen.geometricutilities
-
Represents the curve settings data
.
- curveShaper() - Method in interface nxopen.features.IFormBuilder
-
Returns the iso-parameter curve shaper
License requirements: None.
- CurveShapingBuilder - Interface in nxopen.geometricutilities
-
- CurveShapingBuilder.InsertionMethodOptions - Class in nxopen.geometricutilities
-
Point insertion option
- CurveShapingBuilder.MovementMethodType - Class in nxopen.geometricutilities
-
Curve parameter points movement types
- CurveShapingBuilder.WCSOptionType - Class in nxopen.geometricutilities
-
WCS principal axis or plane types
- curvesToChamfer() - Method in interface nxopen.SketchChamferBuilder
-
Returns the two lines for which a chamfer is to be created
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- curvesToMap() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the curves to map
License requirements: None.
- curvesToOffset() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the curves to offset
License requirements: None.
- curvesToOffset() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
Returns the curves to offset
License requirements: None.
- curvesToOptimize() - Method in interface nxopen.features.OptimizeCurveBuilder
-
Returns the curves and points to optimize.
- curvesToTrim() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the curves to trim
License requirements: None.
- curveSuperSelect() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the sketched curve profile used for creating or editing user defined relief.
- curveTag - Variable in class nxopen.uf.UFDraw.AskSxlineSxsegData
-
- curveTag - Variable in class nxopen.uf.UFDraw.BreakRegionBoundary
-
- curveTag - Variable in class nxopen.uf.UFDraw.DefineBoundary
-
- curveTag - Variable in class nxopen.uf.UFDraw.ViewBoundary
-
- CurveTangentRule - Interface in nxopen
-
- CurveTangentRule.Data - Class in nxopen
-
- curveTargetFace() - Method in interface nxopen.features.shipdesign.WeldCut2Builder
-
Returns the curve target face.
- CURVETO_OBJECT - Static variable in class nxopen.geometricanalysis.CurveContinuityBuilder.Type
-
curve to object
- curveToExtend() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the constraint curve to extend.
- curveToExtract() - Method in interface nxopen.features.subdivision.ExtractCagePolylineBuilder
-
Returns the curve to extract
License requirements: None.
- curveTolerance() - Method in interface nxopen.preferences.PartVisualizationLine
-
Returns the curve tolerance.
- curveToleranceFactorExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the Curve Tolerance Factor expression
License requirements: None.
- curveToTrim() - Method in interface nxopen.features.TrimCurve2Builder
-
Returns the curve to trim
License requirements: None.
- curveTrimRegionOption() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the portion of the curves to be trimmed
License requirements: None.
- curveType() - Method in interface nxopen.drawings.DraftingCurveInfo
-
Returns the drafting curve type
License requirements: None.
- curveType - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
curve type
- curveType() - Method in interface nxopen.mechatronics.PathConstraintFrameBuilder
-
Returns the curve type.
- curveType() - Method in interface nxopen.motion.LinkCouplerBuilder
-
Returns the coupling curve type
License requirements: mechanisms ("MECHANISMS")
.
- curveType() - Method in interface nxopen.SketchProjectBuilder
-
Returns the output curve type generated by the projection.
- curveType - Variable in class nxopen.uf.UFCurve.LineArc
-
- curveTypeEdges() - Method in interface nxopen.drawings.ViewProjectionBuilder
-
Returns the curve type edges in the setting group
License requirements: None.
- curveTypePlane1() - Method in interface nxopen.drawings.ViewProjectionBuilder
-
Returns the curve type plane 1 in the setting group
License requirements: None.
- curveTypePlane2() - Method in interface nxopen.drawings.ViewProjectionBuilder
-
Returns the curve type plane 2 in the setting group , if the type is set to
one plane, the second plane information is ignored
License requirements: None.
- curveUsage() - Method in interface nxopen.cae.QueryCurveUsageOptions
-
Returns the curve usage
License requirements: None.
- CUSHION_PROGRAM - Static variable in class nxopen.tooling.DefineCamBuilder.Types
-
Cushion Program cam type
- cushionAngleA27() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the cushion angle A27 of seat data, it should be set for Class A driver, Class A front passenger
and Class A rear passenger
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- cushionBody() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the cushion body, actually, it often is the bolster body to do the kinematic motion
License requirements: None.
- CushionControl - Interface in nxopen.presslinesimulation
-
Represents a linear cam used in a press line simulation.
- CushionControlBuilder - Interface in nxopen.presslinesimulation
-
- cushionDirection() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the cushion direction that the cushion body moves along
License requirements: None.
- cushionFirmness() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the cushion firmness type: soft cushion, medium cushion or firm cushion
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- cushionName() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the cushion name
License requirements: None.
- CUSTOM - Static variable in class nxopen.ame.FormSheetBuilder.SizeOption
-
- CUSTOM - Static variable in class nxopen.annotations.PartsListBuilder.PartsListMainSymbolText
-
- CUSTOM - Static variable in class nxopen.annotations.PartsListBuilder.PartsListReferenceSymbolText
-
- CUSTOM - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Custom
- CUSTOM - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- CUSTOM - Static variable in class nxopen.cae.XyFunctionUnitSystem
-
Custom unit
- CUSTOM - Static variable in class nxopen.cae.xyplot.UnitSystem
-
Deprecated.
Custom unit
- CUSTOM - Static variable in class nxopen.cam.DmAmBuilder.AmCustomStartTypes
-
Area Milling Custom Start Custom
- CUSTOM - Static variable in class nxopen.cam.DmBndBuilder.BndCustomStartTypes
-
Boundary Milling Custom Start Custom
- CUSTOM - Static variable in class nxopen.cam.DmCmBuilder.DmCmCutPointType
-
custom
- CUSTOM - Static variable in class nxopen.cam.MoveBuilder.Feed
-
Custom
- CUSTOM - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Angle
-
Custom angles
- CUSTOM - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes
-
Feed Rate: Axial then Radial
- CUSTOM - Static variable in class nxopen.diagramming.Method
-
- CUSTOM - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.ZoneMethod
-
- CUSTOM - Static variable in class nxopen.display.DatumPlaneGridBuilder.GridOrientationType
-
Grid size, location, and
orientation can be customized
using the manipulator controls
- CUSTOM - Static variable in class nxopen.display.StudioImageCaptureBuilder.DrawingSizeEnumType
-
Use custom defined drawing size
- CUSTOM - Static variable in class nxopen.display.TrueShadingBuilder.SHEDLightCollectionType
-
Custom lighting configuration
- CUSTOM - Static variable in class nxopen.drawings.BordersAndZonesBuilder.ZoneMethod
-
Deprecated.
- CUSTOM - Static variable in class nxopen.drawings.DetailViewBuilder.Types
-
Custom boundary (this should not be used unless the detail view already has a custom boundary
- CUSTOM - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardEnglishScale
-
a custom scale
- CUSTOM - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetStandardMetricScale
-
a custom scale
- CUSTOM - Static variable in class nxopen.drawings.Method
-
- CUSTOM - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
-
custom method used
- CUSTOM - Static variable in class nxopen.features.HolePackageBuilder.ThreadLengthOptions
-
Length is custom
- CUSTOM - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.WidthTypeOptions
-
The flange sketch has been edited after creation and may or may not conform to any of the above.
- CUSTOM - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderEnglishScale
-
a custom scale
- CUSTOM - Static variable in class nxopen.features.shipdesign.ExpansionDrawingBuilder.JaExpansiondrawingbuilderMetricScale
-
a custom scale
- CUSTOM - Static variable in class nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder.OrientationType
-
Custom Orientation
- CUSTOM - Static variable in class nxopen.features.vehicledesign.BaseDataPassengerBuilder.SeatDirectionOptions
-
Specify a custom value for the seat position (in deg). 1 to 179: Turning the seat rightwards; 1 to 179: Turning the seat leftwards.
- CUSTOM - Static variable in class nxopen.features.vehicledesign.VisionPlaneBuilder.CustomVisionAngle
-
customized
- CUSTOM - Static variable in class nxopen.features.vehicledesign.WindshieldDatumBuilder.CustomVisionAngle
-
customized
- CUSTOM - Static variable in class nxopen.formboard.FlipComponentBuilder.AxisType
-
Flip component by user defined custom axis
- CUSTOM - Static variable in class nxopen.geometricutilities.EndHoleData.ThreadLengthOptions
-
Length is custom
- CUSTOM - Static variable in class nxopen.HumanData.StatureType
-
Indicate stature value is the actual height height of the human
- CUSTOM - Static variable in class nxopen.HumanData.WeightType
-
Indicate weight value is the actual weight of the human
- CUSTOM - Static variable in class nxopen.mechatronics.ExpressionBlockBuilder.SlotType
-
Custom that represents the user created temporary variable
- CUSTOM - Static variable in class nxopen.motion.PostProcess.EnvelopeAccuracyModes
-
- CUSTOM - Static variable in class nxopen.PrintBuilder.PaperSize
-
Custom paper size, this requires the Custom Paper field to be set with the actual paper size ID
- custom - Variable in class nxopen.uf.UFCgm.CustomWidths
-
- CUSTOM - Static variable in class nxopen.weld.WeldBeadSizeBuilder.Size
-
Manually keyin value.
- CUSTOM1 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
A datum surface or pin specified in the customer defaults by the Custom1 type.
- CUSTOM1 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Custom 1 as defined in customer defaults
- CUSTOM1_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- CUSTOM1POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Custom1 Point
- CUSTOM1POINT - Static variable in class nxopen.weld.WeldFeatureSetType
-
Custom1 Point
- CUSTOM1POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- CUSTOM2 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
A datum surface or pin specified in the customer defaults by the Custom2 type.
- CUSTOM2 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Custom 2 as defined in customer defaults
- CUSTOM2_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- CUSTOM2POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Custom2 Point
- CUSTOM2POINT - Static variable in class nxopen.weld.WeldFeatureSetType
-
Custom2 Point
- CUSTOM2POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- CUSTOM3 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
A datum surface or pin specified in the customer defaults by the Custom3 type.
- CUSTOM3 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Custom 3 as defined in customer defaults
- CUSTOM3_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- CUSTOM3POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Custom3 Point
- CUSTOM3POINT - Static variable in class nxopen.weld.WeldFeatureSetType
-
Custom3 Point
- CUSTOM3POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- CUSTOM3WIDTHS - Static variable in class nxopen.uf.UFCgm.Widths
-
- CUSTOM3WIDTHS - Static variable in class nxopen.uf.UFPlot.Widths
-
- CUSTOM4 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
A datum surface or pin specified in the customer defaults by the Custom4 type.
- CUSTOM4 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Custom 4 as defined in customer defaults
- CUSTOM4_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- CUSTOM4POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Custom4 Point
- CUSTOM4POINT - Static variable in class nxopen.weld.WeldFeatureSetType
-
Custom4 Point
- CUSTOM4POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- CUSTOM5 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
A datum surface or pin specified in the customer defaults by the Custom5 type.
- CUSTOM5 - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Custom 5 as defined in customer defaults
- CUSTOM5_POINT_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- CUSTOM5POINT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Custom5 Point
- CUSTOM5POINT - Static variable in class nxopen.weld.WeldFeatureSetType
-
Custom5 Point
- CUSTOM5POINT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- CUSTOM6 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
A datum surface or pin specified in the customer defaults by the Custom6 type.
- CUSTOM7 - Static variable in class nxopen.weld.DatumCommonBuilder.CustomTypes
-
A datum surface or pin specified in the customer defaults by the Custom7 type.
- CUSTOM_DATA_GOUGING_DRIVE_OBSOLETE - Static variable in class nxopen.cam.CAMObject.Attr
-
- CUSTOM_DATA_GOUGING_OBSOLETE - Static variable in class nxopen.cam.CAMObject.Attr
-
- CUSTOM_DATA_GOUGING_PART_OBSOLETE - Static variable in class nxopen.cam.CAMObject.Attr
-
- CUSTOM_DATA_IGNORE_LOOPS_OBSOLETE - Static variable in class nxopen.cam.CAMObject.Attr
-
- CUSTOM_DATA_IGNORE_LOOPS_REMOVED - Static variable in class nxopen.cam.CAMObject.Attr
-
- CUSTOM_DEFINED - Static variable in class nxopen.features.shipdesign.EdgeCutBuilder.ArraySpacing
-
The user can specify a custom amount of space between the cuts
- CUSTOM_DEFINED - Static variable in class nxopen.features.shipdesign.VentilationHoles2Builder.ArraySpacing
-
The user can specify a custom amount of space between the holes
- CUSTOM_GRADUATED - Static variable in class nxopen.display.TrueShadingBuilder.BgdType
-
Customized graduated colored background
- CUSTOM_IMAGE - Static variable in class nxopen.display.TrueShadingBuilder.BgdImageType
-
Custom image background
- CUSTOM_IMAGE - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Custom Image Reflection
- CUSTOM_PALETTE - Static variable in class nxopen.CGMBuilder.Color
-
Custom Palette, uses custom colors defined in CDF
- CUSTOM_PALETTE - Static variable in class nxopen.CGMBuilder.Width
-
Custom palette, uses custom widths defined in WidthDefinition
- CUSTOM_PALETTE - Static variable in class nxopen.PlotColorsWidthsBuilder.Color
-
Custom Palette
- CUSTOM_PALETTE - Static variable in class nxopen.PlotColorsWidthsBuilder.Width
-
Custom palette
- CUSTOM_PALETTE - Static variable in class nxopen.PrintPDFBuilder.Color
-
Custom Palette
- CUSTOM_PALETTE - Static variable in class nxopen.PrintPDFBuilder.Width
-
Custom palette
- CUSTOM_PALETTE_COLORS - Static variable in class nxopen.uf.UFCgm.Colors
-
- CUSTOM_PALETTE_COLORS - Static variable in class nxopen.uf.UFPlot.Colors
-
- CUSTOM_PALETTE_WIDTHS - Static variable in class nxopen.uf.UFCgm.Widths
-
- CUSTOM_PALETTE_WIDTHS - Static variable in class nxopen.uf.UFPlot.Widths
-
- CUSTOM_PLAIN - Static variable in class nxopen.display.TrueShadingBuilder.BgdType
-
Customized plain colored background
- CUSTOM_SHAPE - Static variable in class nxopen.features.shipdesign.Cutout2Builder.CreationMethod
-
Custom curves are extruded to define the cut shape.
- CUSTOM_SIZE - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetOption
-
a custom size drawing sheet
- CUSTOM_SIZE - Static variable in class nxopen.uf.UFDraw.SizeState
-
- CUSTOM_SYMBOL - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI custom symbol type
- CUSTOM_SYMBOL - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes
-
custom symbol
- CUSTOM_SYMBOL - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum
-
- CUSTOM_SYMBOL - Static variable in class nxopen.DxfdwgImporter.ImportBlocksAs
-
Convert blocks as custom symbol
- CUSTOM_THREE_WIDTHS - Static variable in class nxopen.CGMBuilder.Width
-
Custom Three Widths, uses custom widths defined in WidthDefinition
- CUSTOM_THREE_WIDTHS - Static variable in class nxopen.PlotColorsWidthsBuilder.Width
-
Custom Three Widths
- CUSTOM_THREE_WIDTHS - Static variable in class nxopen.PrintPDFBuilder.Width
-
Custom Three Widths
- CUSTOM_UNIT - Static variable in class nxopen.MeasureBodies.AnalysisUnit
-
- customAboveLength() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the length above the datum reference point.
- customAngleTolerance() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the custom angle tolerance.
- customAngleTolerance() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the custom angle tolerance.
- CustomAttribute - Interface in nxopen.features
-
Represents a
CustomAttribute
class
This is an abstract base class of all the types of attributes.
- CustomAttribute.Property - Class in nxopen.features
-
Specifies custom attribute type.
- CustomAttribute.Type - Class in nxopen.features
-
Specifies custom attribute type.
- CustomAttributeCollection - Interface in nxopen.features
-
This class contains the factory method for creating custom attribute object.
- customAttributeCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the CustomAttributeCollection instance belonging to this part .
- customAxis() - Method in interface nxopen.formboard.FlipComponentBuilder
-
- customBlankDistance() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Returns the blank distance
License requirements: None.
- customBoundaryDataList() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Custom Boundary Data List
License requirements: cam_base ("CAM BASE")
.
- customBoundaryDataList() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the custom boundary data list
License requirements: cam_base ("CAM BASE")
.
- customBoundaryDataList() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the custom boundary data list
License requirements: cam_base ("CAM BASE")
.
- CustomBracket - Interface in nxopen.features.shipdesign
-
Represents a custom bracket feature
To create or edit an instance of this class, use
CustomBracketBuilder
Created in NX7.5.0
- CustomBracketBuilder - Interface in nxopen.features.shipdesign
-
- CustomBracketBuilder.CreationMethod - Class in nxopen.features.shipdesign
-
Creation method used to define the placement of the bracket
- CustomColors() - Constructor for class nxopen.uf.UFCgm.CustomColors
-
- CustomColors(UFCgm.Color[]) - Constructor for class nxopen.uf.UFCgm.CustomColors
-
- customCylinderAbove() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the distance the custom cylinder should be created above the
weld point
License requirements: ugweld ("UG WELD")
.
- CustomDoubleArrayAttribute - Interface in nxopen.features
-
- customDoubleArrayAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature double array attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CustomDoubleAttribute - Interface in nxopen.features
-
- customDoubleAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature double attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- customDriveCurve() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the custom drive curve builder
License requirements: None.
- customEdgeTolerance() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the custom edge tolerance.
- customEdgeTolerance() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the custom edge tolerance.
- customer() - Method in interface nxopen.ame.EplanSettingsBuilder
-
Returns the customer
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- customer() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the customer.
- CUSTOMER_DEFAULT - Static variable in class nxopen.assemblies.ClearanceSet.ReanalyzeOutOfDateExcludedPairs
-
- CUSTOMER_DEFAULT - Static variable in class nxopen.features.shipdesign.ManufacturingStockBuilder.StockDataSourceType
-
Initial data will be read from the customer default
- CUSTOMER_DEFAULTS - Static variable in class nxopen.diagramming.CannedAnnotationBuilder.InheritOption
-
Setting the inherit from customer defaults option
- CUSTOMER_DEFAULTS - Static variable in class nxopen.diagramming.tables.TableBuilder.InheritOption
-
Setting the inherit from customer defaults option
- CUSTOMER_DEFINED_DATA - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.EnvelopeOffsetMethod
-
Use the data that the user defines.
- customerValue() - Method in interface nxopen.annotations.CustomerValueBusinessModifierBuilder
-
Returns the customer value
License requirements: None.
- CustomerValueBusinessModifier - Interface in nxopen.annotations
-
Represents business modifier that applies customer values such as CTQ (Critical To Quality),
KC (Key Characteristic) to a PMI.
- CustomerValueBusinessModifierBuilder - Interface in nxopen.annotations
-
- CustomExpressionArrayAttribute - Interface in nxopen.features
-
- customExpressionArrayAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature expression array attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CustomExpressionAttribute - Interface in nxopen.features
-
- customExpressionAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature expression attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- customFaceTolerance() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the custom face tolerance.
- customFaceTolerance() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the custom face tolerance.
- CustomFeature - Interface in nxopen.features
-
Represents a custom feature
To create or edit an instance of this class, use
CustomFeatureBuilder
Created in NX10.0.0
- CustomFeatureBuilder - Interface in nxopen.features
-
- CustomFeatureClass - Interface in nxopen.features
-
Provides interfaces to configure callbacks for a custom feature.
- CustomFeatureClass.CreateFeatureGeometryCallback - Interface in nxopen.features
-
Prototype for create feature geometry callbacks
- CustomFeatureClass.HighlightCallback - Interface in nxopen.features
-
Prototype for highlight callbacks
- CustomFeatureClass.InformationCallback - Interface in nxopen.features
-
Prototype for information callbacks
- CustomFeatureClass.InternalFeaturePreUpdateCallback - Interface in nxopen.features
-
Prototype for internal feature pre update callbacks
- CustomFeatureClass.ModifyFeatureGeometryCallback - Interface in nxopen.features
-
Prototype for modify feature geometry callbacks
- CustomFeatureClass.PostUpdateCallback - Interface in nxopen.features
-
Prototype for post update callbacks
- CustomFeatureClass.PreUpdateCallback - Interface in nxopen.features
-
Prototype for pre update callbacks
- CustomFeatureClassManager - Interface in nxopen.features
-
Provides interfaces to utilise custom feature functionality
To obtain an instance of this class, refer to
Session
Created in NX11.0.0
- customFeatureClassManager() - Method in interface nxopen.Session
-
- CustomFeatureCreateFeatureGeometryEvent - Interface in nxopen.features
-
Represents the event data for a create geometry callback for a custom feature
Only create the geometry here and specify tracking.
- CustomFeatureCreateFeatureGeometryEvent.CopyNXBodyData - Class in nxopen.features
-
- CustomFeatureData - Interface in nxopen.features
-
Represents the collection of attributes for a custom feature.
- CustomFeatureData.AllCustomAttributeNameAndTypesData - Class in nxopen.features
-
- CustomFeatureDataCollection - Interface in nxopen.features
-
This class contains the factory method for creating custom feature data object.
- customFeatureDataCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the CustomFeatureDataCollection instance belonging to this part .
- CustomFeatureEvent - Interface in nxopen.features
-
Represents the event data for custom feature.
- CustomFeatureHighlightEvent - Interface in nxopen.features
-
Represents the event data for highlight callback for custom feature
This class cannot be created
.
- CustomFeatureInformationEvent - Interface in nxopen.features
-
Represents the event data for information callback for custom feature.
- CustomFeatureInternalFeaturePreUpdateEvent - Interface in nxopen.features
-
Represents the event data for pre-update callback for construction and output feature of custom feature.
- CustomFeatureModifyFeatureGeometryEvent - Interface in nxopen.features
-
Represents the event data for a modify geometry callback for a custom feature.
- CustomFeaturePostUpdateEvent - Interface in nxopen.features
-
Represents the event data for post-update callback for custom feature.
- CustomFeaturePreUpdateEvent - Interface in nxopen.features
-
Represents the event data for pre-update callback for custom feature.
- CustomFeatureSelectionFilter - Interface in nxopen.features
-
- customFeed() - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
Returns the feed rate status
License requirements: None.
- customFeed() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Returns the feed rate toggle
License requirements: None.
- customFeed() - Method in interface nxopen.cam.BoundaryTurnMemberSet
-
Returns the custom feed rate
License requirements: None.
- customFeed() - Method in interface nxopen.cam.GeometrySet
-
Returns the flag whether this set has custom feed rate activated
License requirements: None.
- customFeed() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
Returns the flag whether this set has custom feed rate activated
License requirements: None.
- customFeedRate() - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
Returns the flag whether this boundary has custom feed rate activated
License requirements: None.
- customFeedRate() - Method in interface nxopen.cam.BoundaryMillingSet
-
Returns the flag whether this boundary has custom feed rate activated
License requirements: None.
- customfeedrateunit - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
-
the feedrateUnitColumn
- customfeedrateunit - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
-
the feedrateUnitColumn
- customfeedratevalue - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
-
the feedrateColumn
- customfeedratevalue - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
-
the feedrateColumn
- customFeedType() - Method in interface nxopen.cam.BoundaryTurnMemberFeed
-
Returns the corner feed rate type
License requirements: None.
- customHumanFileName() - Method in interface nxopen.features.HumanBuilder
-
Returns the custom human figure file name
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- CustomIntegerArrayAttribute - Interface in nxopen.features
-
- customIntegerArrayAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature integer array attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CustomIntegerAttribute - Interface in nxopen.features
-
- customIntegerAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature integer attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- customizationUpdateFromObject(CAMObject, CAMObject) - Method in interface nxopen.cam.CAMSetup
-
Customize from Object
License requirements: cam_base ("CAM BASE")
.
- customizationUpdateFromTemplate(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Customize from Template
License requirements: cam_base ("CAM BASE")
.
- CUSTOMIZE - Static variable in class nxopen.preferences.GeneralToleranceOption
-
Customize
- CUSTOMIZE - Static variable in class nxopen.preferences.PartVisualizationShade.AdvViewToleranceType
-
Customize.
- CUSTOMIZE - Static variable in class nxopen.preferences.PartVisualizationShade.ShadedViewToleranceType
-
Customize.
- CUSTOMIZE - Static variable in class nxopen.preferences.ShadingToleranceOption
-
Customize
- CUSTOMIZE_DIE_BASE - Static variable in class nxopen.tooling.DieBaseBuilder.Types
-
customize die base
- CUSTOMIZE_WIDTH - Static variable in class nxopen.features.sheetmetal.SheetmetalManagerFlangeWidthOption
-
customize width
- CUSTOMIZED - Static variable in class nxopen.cae.Post.ShowHeader
-
- CUSTOMIZED - Static variable in class nxopen.features.vehicledesign.ReflectionDataBuilder.ResolutionType
-
user defined
- CUSTOMIZED_SOLVER - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- customizedMaterial() - Method in interface nxopen.motion.BeamForceBuilder
-
Returns the customized material
License requirements: mechanisms ("MECHANISMS")
.
- customizedMaterial() - Method in interface nxopen.motion.SplineBeamPropertyBuilder
-
Returns the customized material
License requirements: mechanisms ("MECHANISMS")
.
- CustomizedMaterialBuilder - Interface in nxopen.motion
-
- customizedViewLabel() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the customized view label
License requirements: None.
- customizedViewLabel() - Method in interface nxopen.drawings.ViewLabelBuilder
-
Returns the customized view label
License requirements: None.
- customizedViewLabel() - Method in interface nxopen.drawings.ViewSectionLabelBuilder
-
Returns the customized view label
License requirements: None.
- CustomLogicalArrayAttribute - Interface in nxopen.features
-
- customLogicalArrayAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature logical array attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CustomLogicalAttribute - Interface in nxopen.features
-
- customLogicalAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature logical attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CustomLoops - Interface in nxopen.cam
-
- CustomLoopSet - Interface in nxopen.cam
-
- CustomLoopSetList - Interface in nxopen.cam
-
Represents a list of objects.
- CustomManager - Interface in nxopen.routing
-
The Routing Custom Manager allows you to customize Routing by setting session wide Routing
preferences and by adding plugins, callbacks, and design rules.
- CustomManager - Interface in nxopen.weld
-
Represents weld interface to customize the creation of welding joint features.
- CustomManager.AutoroutePlugin - Interface in nxopen.routing
-
This defines the prototype for the autoroute plugin.
- CustomManager.BomPlugin - Interface in nxopen.routing
-
This defines the prototype for the bill of materials plugin.
- CustomManager.BundlePlugin - Interface in nxopen.routing
-
This defines the prototype Routing calls to determine the bundle diameter for each
bundle in a harness.
- CustomManager.Callback - Interface in nxopen.routing
-
This defines the prototype for all Routing callbacks.
- CustomManager.CallbackReason - Class in nxopen.routing
-
The reason for registering a callback indicates which Routing commands will use
the callback.
- CustomManager.ChoosePartPlugin - Interface in nxopen.routing
-
This defines the prototype for the choose part plugin used by the Place Part command.
- CustomManager.DatumIconHandler - Interface in nxopen.weld
-
Method called from the part navigator to define the datum surface and pin icon.
- CustomManager.DesignRule - Interface in nxopen.routing
-
This defines the prototype for all Routing design rules.
- CustomManager.DesignRuleReason - Class in nxopen.routing
-
The reason for registering a design rule indicates which Routing commands will use the design rule.
- CustomManager.DisciplineChangedPlugin - Interface in nxopen.routing
-
This defines the prototype for the Discipline Changed plugin.
- CustomManager.DuctSizeCalculatorCreateStockPlugin - Interface in nxopen.routing
-
This defines the prototype for the Duct Size Calculator's Create Stock plugin.
- CustomManager.DuctSizeCalculatorDisplayNoteFlag - Class in nxopen.routing
-
Used by the Duct Size Calculator's display note plugin to indicate whether to add or remove the note.
- CustomManager.DuctSizeCalculatorDisplayNotePlugin - Interface in nxopen.routing
-
This defines the prototype for the Duct Size Calculator's Display Note plugin.
- CustomManager.DuctSizeCalculatorDuctShape - Class in nxopen.routing
-
Used by the Duct Size Calculator's create stock plugin to indicate what shape stock to create.
- CustomManager.FilterBlankingPlugin - Interface in nxopen.routing
-
This defines the prototype for the filter blanking plugin.
- CustomManager.ImportExportPlugin - Interface in nxopen.routing
-
This defines the prototype for the import export plugins.
- CustomManager.ModifyFeatureHandler - Interface in nxopen.weld
-
User defined method that is called whenever a welding joints are created or edited
- CustomManager.NavigatorObjectSelectedPlugin - Interface in nxopen.routing
-
This defines the prototype Routing calls whenever an object on the Component or
Connection Navigator is selected or deselected.
- CustomManager.NavigatorType - Class in nxopen.routing
-
Used by the navigator object selected plugin to indicate in which navigator the
objects were selected.
- CustomManager.PipeJointSetType - Interface in nxopen.weld
-
User defined method that is called whenever a welding joint is created.
- CustomManager.PipingComponentFileOptions - Class in nxopen.routing
-
Used by the piping component file plugin to indicate if it should overwrite an existing file or not.
- CustomManager.PipingComponentFilePlugin - Interface in nxopen.routing
-
This defines the prototype for the piping component file plugin.
- CustomManager.PlmxmlObjectNamePlugin - Interface in nxopen.routing
-
This defines the prototype for the Route Node and Route Section name plugins.
- CustomManager.PointExitHandler - Interface in nxopen.weld
-
User defined method that is called whenever a welding features are created through Weld Point command.
- CustomManager.SelectionType - Class in nxopen.routing
-
Used by the navigator object selected plugin to indicate whether the objects are
selected or deselected.
- CustomManager.SortConnectionsPlugin - Interface in nxopen.routing
-
This defines the prototype for the sort connections plugin in which you can sort
the connections in the order Routing will route them along their paths.
- CustomManager.SpecificationChangedPlugin - Interface in nxopen.routing
-
This defines the prototype for the Specification Changed plugin.
- CustomManager.StockComponentLockedPlugin - Interface in nxopen.routing
-
This defines the prototype for the stock component locked plugin.
- CustomManager.UnifyPathPlugin - Interface in nxopen.routing
-
This defines the prototype for the unify path plugin.
- CustomManager.ValidateFormboardPlugin - Interface in nxopen.routing
-
This defines the prototype for the validate formboard plugin.
- CustomManager.VariableBevelHandler - Interface in nxopen.weld
-
User defined method that returns the angle divisions for a variable bevel.
- CustomManager.WeldJointHandler - Interface in nxopen.weld
-
User defined method that is called whenever a welding joint is created or updated
- CustomManager.WrappedOverstockLengthCalculationPlugin - Interface in nxopen.routing
-
This defines the prototype for the wrapped overstock length calculation plugin.
- customMemberData() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Custom Member Data type
License requirements: None.
- customMemberDataDistance() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Custom Member Data Distance
License requirements: None.
- customMessage() - Method in interface nxopen.visualreporting.GroupLabel
-
- customMessage() - Method in interface nxopen.visualreporting.Property
-
Returns the custom message of this property.
- customMessage() - Method in interface nxopen.visualreporting.ResultCategory
-
- customMessage() - Method in interface nxopen.visualreporting.VisualReport
-
- customMessageOfReport() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- customMessageOfReportingProperty() - Method in interface nxopen.visualreporting.VisualReportBuilder
-
- customOffset() - Method in interface nxopen.cam.BoundaryMemberSet
-
Returns the flag whether this boundary has custom offset activated
License requirements: None.
- customOffset() - Method in interface nxopen.cam.BoundarySet
-
Returns the flag whether this boundary has custom offset activated
License requirements: None.
- customOrientationMethod() - Method in interface nxopen.drawings.View2dOrientBuilder
-
Returns the custom orientation method
License requirements: None.
- customOverwrite - Variable in class nxopen.cae.Post.PostviewGetColorbarData
-
- customPaper() - Method in interface nxopen.PrintBuilder
-
Returns the custom paper.
- customPartBoundary() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the custom part boundary builder
License requirements: None.
- customPartOffset() - Method in interface nxopen.cam.GeometrySet
-
Returns the flag whether this set has custom part offset activated
License requirements: None.
- CustomPoint() - Constructor for class nxopen.uf.UFCamgeom.CustomPoint
-
- CustomPoint(Tag, double[], double, double, double) - Constructor for class nxopen.uf.UFCamgeom.CustomPoint
-
- CustomPopupMenu - Interface in nxopen
-
Represents Custom Popup Menu Item class .
- CustomPopupMenuHandler - Interface in nxopen
-
Represents Custom Popup Menu Handler class .
- CustomPopupMenuHandler.AddCustomPopupMenuCallback - Interface in nxopen
-
This callback will be invoked by NX application when a RMB click is performed on
NX Tc Navigator application.
- CustomPopupMenuHandler.CustomPopupMenuInvokedCallback - Interface in nxopen
-
This callback will be invoked by NX when user clicks on a custom menu item.
- customPopupMenuInvokedCallback() - Method in interface nxopen.CustomPopupMenuHandler.CustomPopupMenuInvokedCallback
-
This callback will be invoked by NX when user clicks on a custom menu item.
- CustomPopupMenuItem - Interface in nxopen
-
Represents Custom Popup Menu Item class .
- customRadius() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the radius of the solid sphere, cylinder or cone created.
- customRadius() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the radius to create the sphere, cylinder, or cone with
License requirements: ugweld ("UG WELD")
.
- customScratchDirectory() - Method in interface nxopen.cae.optimization.TBSOutputControlOptions
-
Returns the custom cratch directory for solving
License requirements: None.
- customSection() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the section containing the custom bead shape.
- customShape() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the section of curves defining the custom shape cut
License requirements: None.
- customShapeSizeLowerLimit() - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
Returns the custom shape size lower limit to be set for search.
- customShapeSizeUpperLimit() - Method in interface nxopen.shapesearch.ShapeSearchBuilder
-
Returns the custom shape size upper limit to be set for search.
- customStock() - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
Returns the flag whether this boundary has custom stock activated
License requirements: None.
- customStock() - Method in interface nxopen.cam.BoundaryMillingMemberSet
-
Returns the flag whether this boundary member has custom stock activated
License requirements: None.
- customStock() - Method in interface nxopen.cam.BoundaryMillingSet
-
Returns the flag whether this boundary has custom stock activated
License requirements: None.
- customStock() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Returns the flag whether this boundary has custom stock activated
License requirements: None.
- customStock() - Method in interface nxopen.cam.BoundaryTurnSet
-
Returns the flag whether this boundary has custom stock activated
License requirements: None.
- customStock() - Method in interface nxopen.cam.GeometrySet
-
Returns the flag whether this set has custom stock activated
License requirements: None.
- customStock() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
Returns the flag whether this set has custom stock activated
License requirements: None.
- CustomStringArrayAttribute - Interface in nxopen.features
-
- customStringArrayAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature string array attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CustomStringAttribute - Interface in nxopen.features
-
- customStringAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature string attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CustomSymbol - Interface in nxopen.annotations
-
- CustomSymbol() - Constructor for class nxopen.uf.UFDrf.CustomSymbol
-
- CustomSymbol(Tag[], int, UFDrf.CustomSymbolText[], int, Tag, UFDrf.SymbolConnection[], int, UFDrf.Leader, double, double, double[]) - Constructor for class nxopen.uf.UFDrf.CustomSymbol
-
- CustomSymbolCollection - Interface in nxopen.annotations
-
- CustomSymbolData - Interface in nxopen.annotations
-
- CustomSymbolLeaderBuilder - Interface in nxopen.annotations
-
This class is responsible for defining the origin and leader for custom
symbol objects.
- customSymbols() - Method in interface nxopen.annotations.AnnotationManager
-
CustomSymbol collection .
- customSymbolScale() - Method in interface nxopen.annotations.TextWithSymbolsBuilder
-
Returns the scale of the custom symbols
License requirements: None.
- customSymbolsInForeground() - Method in interface nxopen.CGMBuilder
-
Returns the plotting custom symbols in the foreground option.
- customSymbolsInForeground() - Method in interface nxopen.PlotBuilder
-
Returns the plotting custom symbols in the foreground option.
- customSymbolsInForeground() - Method in interface nxopen.PrintBuilder
-
Returns the plotting custom symbols in the foreground option.
- customSymbolsInForeground() - Method in interface nxopen.PrintPDFBuilder
-
Returns the plotting custom symbols in the foreground option.
- customSymbolSmashToSketch() - Method in interface nxopen.preferences.PartDrafting
-
Returns the custom symbol smash behavior.
- CustomSymbolText() - Constructor for class nxopen.uf.UFDrf.CustomSymbolText
-
- CustomSymbolText(Tag, UFDrf.CustomSymbolTextType, String, double, double, double, String[], int, int, String) - Constructor for class nxopen.uf.UFDrf.CustomSymbolText
-
- CustomSymbolTextData - Interface in nxopen.annotations
-
- CustomTagArrayAttribute - Interface in nxopen.features
-
- customTagArrayAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature tag array attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CustomTagAttribute - Interface in nxopen.features
-
- customTagAttributeByName(String) - Method in interface nxopen.features.CustomFeatureData
-
Get the custom feature tag attribute of given name
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CustomTextStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the text content definition in title options
Not support KF.
- customTolerance() - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
Returns the tolerance status
License requirements: None.
- customTolerance() - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Returns the tolerance toggle
License requirements: None.
- customTolerance() - Method in interface nxopen.cam.GeometrySet
-
Returns the flag whether this set has custom tolerances activated
License requirements: None.
- customTolerance() - Method in interface nxopen.cam.SurfaceDriveGeometrySet
-
Returns the flag whether this set has custom tolerances activated
License requirements: None.
- customTotalCylinderLength() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the total length of the cylinder to be created.
- customTotalLength() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the total length of the cylinder or cone along the direction axis.
- customType() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the custom datum type.
- customType() - Method in interface nxopen.weld.DatumIconBuilder
-
Returns the custom datum type from the customer defaults that was used.
- customTypeName() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the custom name used to create the datum.
- CustomViewSettingsBuilder - Interface in nxopen.drawings
-
this class represents the "this class represents Drawings.CustomViewSettingsBuilder.
- customViewSettingsBuilder() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
- CustomViewSettingsBuilder.Features - Class in nxopen.drawings
-
the options for small features
- CustomViewSettingsBuilder.Font - Class in nxopen.drawings
-
the options for all the fonts used in the custom view settings dialog
- CustomViewSettingsBuilder.Interfering - Class in nxopen.drawings
-
the options for interfering curves
- CustomViewSettingsBuilder.ThreadStandards - Class in nxopen.drawings
-
the thread standards options
- CustomViewSettingsBuilder.Width - Class in nxopen.drawings
-
the width options for all the line width used in the customize view settings dialog
- customWebAppInvokedCallback() - Method in interface nxopen.pdm.CustomWebAppMenuHandler.CustomWebAppInvokedCallback
-
This callback will be invoked by NX when user clicks on a custom webapp menu item.
- CustomWebAppMenuHandler - Interface in nxopen.pdm
-
Represents Custom WebApp Menu Handler class .
- CustomWebAppMenuHandler.CustomWebAppInvokedCallback - Interface in nxopen.pdm
-
This callback will be invoked by NX when user clicks on a custom webapp menu item.
- CustomWidth - Interface in nxopen
-
- CustomWidths() - Constructor for class nxopen.uf.UFCgm.CustomWidths
-
- CustomWidths(int, UFCgm.WidthUse, UFCgm.WidthSingle, double, int, UFCgm.WidthCustom[], UFCgm.WidthColor[]) - Constructor for class nxopen.uf.UFCgm.CustomWidths
-
- customXAngle() - Method in interface nxopen.drawings.View2dOrientBuilder
-
Returns the orientation angle around the X axis
License requirements: None.
- customYAngle() - Method in interface nxopen.drawings.View2dOrientBuilder
-
Returns the orientation angle around the Y axis
License requirements: None.
- customZAngle() - Method in interface nxopen.drawings.View2dOrientBuilder
-
Returns the orientation angle around the Z axis
License requirements: None.
- CUT - Static variable in class nxopen.cam.AcrossVoids.MotionTypes
-
Cut
- CUT - Static variable in class nxopen.cam.CamOperationMotionType
-
- CUT - Static variable in class nxopen.cam.CamPathMotionType
-
- CUT - Static variable in class nxopen.cam.MoveBuilder.Motion
-
Cut
- cut(int[]) - Method in interface nxopen.cam.ObjectContainer
-
Cut CAM Objects
License requirements: None.
- cut() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color cut
License requirements: None.
- CUT - Static variable in class nxopen.cam.SmallAreaAvoidance.StatusTypes
-
Status-Cut
- CUT - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.FeedrateModesTypes
-
Feed Rate: Axial then Radial
- CUT - Static variable in class nxopen.drafting.CutCopyPasteBuilder.TypeOperation
-
Cut type
- CUT - Static variable in class nxopen.drawings.SectionLineSegmentBuilder.Types
-
- CUT - Static variable in class nxopen.drawings.SectionLineSegmentPointBuilder.SegmentTypes
-
- cut() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the cut
License requirements: None.
- CUT_AND_PASTE - Static variable in class nxopen.features.AdmMoveFaceBuilder.MoveOptionType
-
Option equates to enhanced Move Face with Cut or Copy Face with Paste Face and Delete Face without heal.
- CUT_AREA - Static variable in class nxopen.cam.Preferences.GeometryTypes
-
cut area
- CUT_AREA - Static variable in class nxopen.uf.UFCam.GeomType
-
- CUT_AREA_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- CUT_AREA_GEOM_TYPE - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- CUT_BODY - Static variable in class nxopen.features.subdivision.StartSymmetricModelingBuilder.MirrorProcedureOption
-
Deprecated.
Cuts the mesh
- CUT_DOWN - Static variable in class nxopen.cam.CutParametersPlungeDirectionTypes
-
Cut Down
- CUT_EDGE_LENGTH - Static variable in class nxopen.cam.TurnToolBuilder.SizeOptions
-
Size option: Cut Edge length
- CUT_FEED_RATE - Static variable in class nxopen.cam.FeedsBuilder.RecalcuateBasedOn
-
cut feed rate
- CUT_FLOOR - Static variable in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
-
One pass End Mill.
- CUT_FLOOR - Static variable in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
-
One pass End Mill.
- CUT_FLOOR_AND_SWARF_CUT_WALL - Static variable in class nxopen.features.AnalyzePocketBuilder.AngledWallSolutions
-
Two pass End Mill.
- CUT_FLOOR_AND_SWARF_CUT_WALL - Static variable in class nxopen.features.BlendPocketBuilder.AngledWallSolutions
-
Two pass End Mill.
- CUT_LATER - Static variable in class nxopen.cam.RoughTurningBuilder.ReversalModeTypes
-
Reversal mode: Cut Later
- CUT_LEVEL - Static variable in class nxopen.cam.ToolPathEditorBuilder.TrimPathType
-
- CUT_PERCENT - Static variable in class nxopen.cam.FeedRateUnit
-
use cut percent as feed rate unit
- CUT_PLANE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
cut plane
- CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.FinalTypes
-
cut plane to clearance
- CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.InitialTypes
-
cut plane to clearance
- CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferBetweenRegionsTypes
-
cut plane to clearance
- CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmPlanarBuilder.TransferWithinLevelsTypes
-
cut plane to clearance
- CUT_PLANE_TO_CLEARANCE - Static variable in class nxopen.cam.NcmTransfer.TransferTypes
-
cut plane to clearance
- CUT_REGION_START_TYPE - Static variable in class nxopen.uf.UFCamgeom.CustomPointType
-
- CUT_REGIONS_LOCATED_ON_BOTH_SIDES_OF_CENTERLINE - Static variable in class nxopen.uf.UFTurn.CutRegionsLocation
-
- CUT_REGIONS_LOCATED_ON_FAR_SIDE_OF_CENTERLINE - Static variable in class nxopen.uf.UFTurn.CutRegionsLocation
-
- CUT_REGIONS_LOCATED_ON_NEAR_SIDE_OF_CENTERLINE - Static variable in class nxopen.uf.UFTurn.CutRegionsLocation
-
- CUT_REGIONS_LOCATED_UNDEFINED - Static variable in class nxopen.uf.UFTurn.CutRegionsLocation
-
- CUT_SOLIDS - Static variable in class nxopen.tooling.MWDefineSheetsBuilder.DefineStepType
-
- CUT_TO_SHAPE - Static variable in class nxopen.features.shipdesign.BuiltUpManModeBuilder.BuiltUpManModeType
-
- CUT_TO_SHOULDER - Static variable in class nxopen.cam.CutParametersCleanupControlTypes
-
Cleanup control: Cut to Shoulder
- CutAngle - Interface in nxopen.cam
-
Represents a boundary cut angle ci Builder .
- cutAngle() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the cut angle
License requirements: None.
- cutAngle() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the cut angle ci builder
License requirements: None.
- cutAngle() - Method in interface nxopen.cam.MillCutParameters
-
Returns the cut angle
License requirements: None.
- CutAngle.Types - Class in nxopen.cam
-
Available types for cut angle type in boundary cut angle customizable item
- cutAngleBuilder() - Method in interface nxopen.cam.AreaMillingNonSteepContainment
-
Returns the cut angle
License requirements: None.
- cutAreaColor() - Method in interface nxopen.cam.Preferences
-
Returns the cut area color
License requirements: None.
- cutAreaExtensionDistance() - Method in interface nxopen.cam.MillCutParameters
-
Returns the cut area extension distance builder
License requirements: None.
- cutAreaGeomColor - Variable in class nxopen.uf.UFCam.Preferences
-
- cutAreaGeometry() - Method in interface nxopen.cam.MillAreaGeomBuilder
-
Returns the cut area geometry builder
License requirements: None.
- cutAreaGeometry() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the cut area geometry builder
License requirements: None.
- cutAreaGeometry() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the cut area geometry builder
License requirements: None.
- cutAreaGeomType - Variable in class nxopen.uf.UFCam.Preferences
-
- cutAreaSelection() - Method in interface nxopen.cam.Preferences
-
- cutAttributes(FamilyAttribute[]) - Method in interface nxopen.partfamily.TemplateManager
-
Cut selected attributes of a part family.
- cutbackLengthObject() - Method in interface nxopen.routing.IAxisPort
-
Returns the cutback length object of a port, i.e. an expression representing the length
along the wire from the port where individual wires leave a bundle to attach to pins
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- cutbackOption() - Method in interface nxopen.routing.ModelTerminalsBuilder
-
Returns the cutback option
License requirements: routing_harness ("Routing Harness")
.
- cutBand() - Method in interface nxopen.cam.BlendFinish
-
Returns the Cut Band
License requirements: None.
- CutBand - Interface in nxopen.cam
-
Cut Band Builder .
- CutBand.Types - Class in nxopen.cam
-
Available types for Cut Band .
- cutBelowOverhangingBlank() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Cut Below Overhanging Blank Method
License requirements: cam_base ("CAM BASE")
.
- cutBelowToolContact() - Method in interface nxopen.cam.MillCutParameters
-
Returns the cut below tool contact setting
License requirements: None.
- cutBetweenLevels() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the cut between levels
License requirements: None.
- cutBetweenLevels() - Method in interface nxopen.cam.MillCutParameters
-
Returns the cut between levels
License requirements: None.
- cutbody - Variable in class nxopen.CutViewCollection.IsUncutBodyOfViewData
-
Corresponding Cut body
- cutColor() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the cut face color
License requirements: solid_modeling ("SOLIDS MODELING")
.
- Cutcom - Interface in nxopen.cam
-
Represents a
Cutcom
Created in NX6.0.2
- cutcom - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
-
the cutcom
- cutcom - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the cutcom
- cutcom() - Method in interface nxopen.cam.NcmTurningBuilder
-
Returns the cutter compensation builder
License requirements: None.
- cutcom - Variable in class nxopen.uf.UFCutter.TrackingPointData
-
- cutcom - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
-
- Cutcom() - Constructor for class nxopen.uf.UFPath.Cutcom
-
- Cutcom(UFPath.CutcomMode, UFPath.PlaneType, UFPath.CutcomOn, UFPath.CutcomOff, int, boolean, boolean) - Constructor for class nxopen.uf.UFPath.Cutcom
-
- Cutcom.Types - Class in nxopen.cam
-
Available types for cutter compensation in planar milling
- CUTCOM_LEFT - Static variable in class nxopen.uf.UFPath.CutcomMode
-
- CUTCOM_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.CutcomMode
-
- CUTCOM_OFF - Static variable in class nxopen.uf.UFPath.CutcomMode
-
- CUTCOM_OFF_AFTER_MOTION - Static variable in class nxopen.uf.UFPath.CutcomOff
-
- CUTCOM_OFF_AFTER_RETRACT - Static variable in class nxopen.uf.UFPath.CutcomOff
-
- CUTCOM_OFF_BEFORE_RETRACT - Static variable in class nxopen.uf.UFPath.CutcomOff
-
- CUTCOM_OFF_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.CutcomOff
-
- CUTCOM_ON - Static variable in class nxopen.uf.UFPath.CutcomMode
-
- CUTCOM_ON_AFTER_ENGAGE - Static variable in class nxopen.uf.UFPath.CutcomOn
-
- CUTCOM_ON_BEFORE_ENGAGE - Static variable in class nxopen.uf.UFPath.CutcomOn
-
- CUTCOM_ON_BEFORE_MOTION - Static variable in class nxopen.uf.UFPath.CutcomOn
-
- CUTCOM_ON_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.CutcomOn
-
- CUTCOM_RIGHT - Static variable in class nxopen.uf.UFPath.CutcomMode
-
- cutcomIdBuilder() - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
Returns the cutcom id
License requirements: None.
- cutcomMinimumAngle() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the cutter compensation minimum angle
License requirements: None.
- cutcomMinimumAngle() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the cutter compensation minimum angle
License requirements: None.
- cutcomMinimumMove() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the cutter compensation minimum move builder (inheritable tool dep)
License requirements: None.
- cutcomMinimumMoveBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the cutter compensation minimum move builder (inheritable tool dep)
License requirements: None.
- cutcomMode - Variable in class nxopen.uf.UFPath.Cutcom
-
- cutcomOff() - Method in interface nxopen.cam.NcmWedmBuilder
-
Returns the cutcom_off
License requirements: cam_base ("CAM BASE")
.
- cutcomOffStatus - Variable in class nxopen.uf.UFPath.Cutcom
-
- cutcomOn() - Method in interface nxopen.cam.NcmWedmBuilder
-
Returns the cutcom_on
License requirements: cam_base ("CAM BASE")
.
- cutcomOnStatus - Variable in class nxopen.uf.UFPath.Cutcom
-
- cutcomOutputContactPoint() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the cutter compensation output contact point status
License requirements: None.
- cutcomOutputContactPoint() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the cutter compensation output contact point status
License requirements: None.
- cutcomOutputPlane() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the cutter compensation output plane status
License requirements: None.
- cutcomOutputPlane() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the cutter compensation output plane status
License requirements: None.
- cutcomReg() - Method in interface nxopen.cam.NcmWedmBuilder
-
Returns the cutcom_reg
License requirements: cam_base ("CAM BASE")
.
- cutcomreg - Variable in class nxopen.cam.TrackingBuilder.Data
-
the cutcom register
- cutcomReg() - Method in interface nxopen.cam.WireTool
-
Returns the Cutcom Register
License requirements: None.
- cutcomRegBuilder() - Method in interface nxopen.cam.NcmWedmBuilder
-
Returns the cutcom_reg builder
License requirements: cam_base ("CAM BASE")
.
- cutcomRegister() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool cutcom register builder
License requirements: None.
- cutcomRegister() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the cutcom register
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- cutcomRegister - Variable in class nxopen.uf.UFPath.TrackingPointChange
-
- cutcomRegisterFlag() - Method in interface nxopen.cam.NcmWedmBuilder
-
Returns the cutcom output register flag
License requirements: cam_base ("CAM BASE")
.
- cutcomRegisterToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool cutcom register toggle
License requirements: None.
- cutcomRegisterType() - Method in interface nxopen.cam.MachinePocketGroupBuilder
-
- cutcomRegisterType() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the cutcom register type
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- cutcomStatus - Variable in class nxopen.uf.UFCutter.TrackingPointData
-
- cutcomTrackingPointType() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the cutter compensation tracking point selection
License requirements: None.
- cutcomType() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the cutter compensation type
License requirements: None.
- cutcomType() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the cutter compensation type
License requirements: None.
- cutcomused - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
-
the cutcom toggle
- cutcomused - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the cutcom toggle
- cutConnection() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the cut connection
License requirements: None.
- CutCopyPasteBuilder - Interface in nxopen.drafting
-
Represents a paste in Drafting.
- CutCopyPasteBuilder.TypeOperation - Class in nxopen.drafting
-
Specifies the copy cut operation type.
- CutCopyPasteBuilder.TypePaste - Class in nxopen.drafting
-
Specifies the paste type.
- cutCopyPasteLeader() - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Returns the leader builder.
- CutCopyPasteLeaderBuilder - Interface in nxopen.drafting
-
Represents a Drafting Paste, especially when reassociating a leader on paste.
- cutCount() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the number of cuts
License requirements: None.
- cutCurves() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the cut curves on or close to the source face can be used to tear the source face along these curvesto reduce the distortion during flattening
License requirements: None.
- cutCurves() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the cut curves on or close to the source face can be used to tear the source face along these curvesto reduce the distortion during flattening
License requirements: None.
- cutCurveSets - Variable in class nxopen.uf.UFModl.SmpunchData
-
- cutDepth() - Method in interface nxopen.cam.ThreadCutParameters
-
Returns the thread cut depth
License requirements: None.
- CutDepthChecker - Interface in nxopen.cam
-
Represents a cut depth checker object
This has not creator
.
- cutDepths() - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
Returns the cut depths type
License requirements: None.
- cutDir() - Method in interface nxopen.cam.GuidedCurveBuilder
-
Returns the Cut Dir
License requirements: None.
- cutDir() - Method in interface nxopen.cam.GuidingCurvesCutDir
-
Returns the guiding curves cut direction used for common block
License requirements: None.
- cutDir - Variable in class nxopen.uf.UFDraw.AskPictorialSxlineData
-
- cutDirection() - Method in interface nxopen.cam.Blade
-
Returns the Cut Direction
License requirements: None.
- CutDirection - Interface in nxopen.cam
-
Represents a boundary cut direction ci Builder
This builder can not instantiated separately.
- cutDirection() - Method in interface nxopen.cam.CylinderMillingCutParameters
-
- cutDirection() - Method in interface nxopen.cam.DPMTubeBuilder
-
Returns the cut direction
License requirements: None.
- cutDirection() - Method in interface nxopen.cam.LaserCircleCutout
-
Returns the Cut Direction
License requirements: None.
- cutDirection() - Method in interface nxopen.cam.LaserHexagonCutout
-
Returns the Cut Direction
License requirements: None.
- cutDirection() - Method in interface nxopen.cam.LaserProfileMove
-
Returns the Cut Direction
License requirements: None.
- cutDirection() - Method in interface nxopen.cam.LaserRectangleCutout
-
Returns the Cut Direction
License requirements: None.
- cutDirection() - Method in interface nxopen.cam.LaserSlotCutout
-
Returns the Cut Direction
License requirements: None.
- cutDirection() - Method in interface nxopen.cam.MillCutParameters
-
Returns the cut direction
License requirements: None.
- cutDirection() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the cut direction
License requirements: None.
- cutDirection() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the cut direction
License requirements: None.
- cutDirection() - Method in interface nxopen.cam.ThreadMillingCutParameters
-
- cutDirection() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Cut Direction
License requirements: cam_base ("CAM BASE")
.
- cutDirection() - Method in interface nxopen.cam.WedmCutParameters
-
Returns the Cut Direction
License requirements: cam_base ("CAM BASE")
.
- cutDirection() - Method in interface nxopen.drawings.SectionLineBuilder
-
- CutDirection.Types - Class in nxopen.cam
-
Available types for cut direction type in boundary cut direction customizable item
- cutDirectionType() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the function for cut direction type
License requirements: None.
- cutDirType() - Method in interface nxopen.cam.LaserCutDirection
-
Returns the Cut Direction Type
License requirements: None.
- cutDisplayInstanceObjects(Annotation[], View[], View) - Method in interface nxopen.annotations.PmiManager
-
Cuts the input PMI Display Instance objects in the part.
- CutDwell - Interface in nxopen.cam
-
Represents a
CutDwell
Created in NX6.0.0
- cutDwell() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the Cut Dwell
License requirements: None.
- CutDwell.Types - Class in nxopen.cam
-
the rough cut dwell mode options .
- CutFace - Interface in nxopen.features
-
Represents a cut face feature
To create or edit an instance of this class, use
CutFaceBuilder
Created in NX6.0.0
- CutFaceBuilder - Interface in nxopen.features
-
Represents a builder for a cut face feature.
- cutFaceColor() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
Returns the cut face color on the SHADING tab of the View Style Dialog
License requirements: None.
- cutFaceDrops() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the option to consider cut ply elements as drop-offs
License requirements: None.
- cutFaceSelect() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the cutting face(s) selection
License requirements: None.
- cutFillets() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the fillets mode
License requirements: None.
- cutGasPressure() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Cut Gas Pressure
License requirements: cam_base ("CAM BASE")
.
- cutGasPressure() - Method in interface nxopen.cam.LaserMethod
-
Returns the Cut Gas Pressure
License requirements: None.
- cutGasType() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Cut Gas Type
License requirements: cam_base ("CAM BASE")
.
- cutGasType() - Method in interface nxopen.cam.LaserMethod
-
Returns the Cut Gas Type
License requirements: None.
- cutLaserDelay() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Laser Cut Delay
License requirements: cam_base ("CAM BASE")
.
- cutLaserDelay() - Method in interface nxopen.cam.LaserMethod
-
Returns the Cut Laser Delay
License requirements: None.
- cutLaserFrequency() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Laser Cut Frequency
License requirements: cam_base ("CAM BASE")
.
- cutLaserFrequency() - Method in interface nxopen.cam.LaserMethod
-
Returns the Cut Laser Frequency
License requirements: None.
- cutLaserPower() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the Laser Cut Power
License requirements: cam_base ("CAM BASE")
.
- cutLaserPower() - Method in interface nxopen.cam.LaserMethod
-
Returns the Cut Laser Power
License requirements: None.
- cutLength() - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
Returns the cut length.
- cutLevel() - Method in interface nxopen.cam.CavityMillingBuilder
-
Returns the cut level builder
License requirements: None.
- CutLevel - Interface in nxopen.cam
-
Represents a cut level object for cavity mill and zlevel mill.
- cutLevel() - Method in interface nxopen.cam.PlanarMillingBuilder
-
Returns the Planar Mill Cut Level builder
License requirements: None.
- cutLevel() - Method in interface nxopen.cam.PlungeMillingBuilder
-
Returns the cut level builder
License requirements: None.
- cutLevel() - Method in interface nxopen.cam.VazlMillingBuilder
-
Returns the cut level builder
License requirements: None.
- cutLevel() - Method in interface nxopen.cam.ZLevelMillingBuilder
-
Returns the cut level builder
License requirements: None.
- CutLevel.MeasureTypes - Class in nxopen.cam
-
measure from types .
- CutLevel.RangeTypes - Class in nxopen.cam
-
range types .
- CutLevel.Types - Class in nxopen.cam
-
cut level types .
- CutLevelPlanar - Interface in nxopen.cam
-
Represents a cut level object for planar mill.
- CutLevelPlanar.Types - Class in nxopen.cam
-
cut level types .
- cutLevels() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the cut levels builder
License requirements: None.
- CutLevels() - Constructor for class nxopen.uf.UFCutLevels.CutLevels
-
- CutLevels(int, UFCutLevels.Single[], int, UFCutLevels.Single[]) - Constructor for class nxopen.uf.UFCutLevels.CutLevels
-
- cutLevels - Variable in class nxopen.uf.UFCutLevels.CutLevels
-
- cutLevels() - Method in interface nxopen.UFSession
-
- cutLevelType() - Method in interface nxopen.cam.AreaMillingSteepContainment
-
Returns the cut level type
License requirements: None.
- cutLevelType() - Method in interface nxopen.cam.CutLevel
-
Returns the cut level type
License requirements: None.
- cutLevelType() - Method in interface nxopen.cam.CutLevelPlanar
-
Returns the cut level type
License requirements: None.
- cutLevelType() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the cut level type
License requirements: None.
- cutLineAngle() - Method in interface nxopen.features.WrapBuilder
-
Returns the angle, measured from the point of tangency of the plane and the faces,
at which curves will be split during the wrapping operation.
- cutLineAngle - Variable in class nxopen.uf.UFCurve.WrapData
-
- cutLocation() - Method in interface nxopen.drawings.HalfSectionLineBuilder
-
- cutLocation3D() - Method in interface nxopen.drawings.OrientedSectionLineBuilder
-
- cutNode(int, NavigatorNode[]) - Method in interface nxopen.shipdesign.NavigatorCollection
-
Cut navigator node.
- cutObject() - Method in interface nxopen.display.DynamicSectionCut
-
Returns the object from which this section-cut is generated.
- cutObject - Variable in class nxopen.uf.UFDraw.HalfSxsegs
-
- cutObjects(AMEBaseNode[]) - Method in interface nxopen.ame.AMEManager
-
Cuts objects and places them on the clipboard
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- cutObjects(CAMSetup.View, CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Cut objects
License requirements: cam_base ("CAM BASE")
.
- cutObjects(CAMSetup.View, CAMObject[]) - Method in interface nxopen.cam.InspectionSetup
-
Cut objects
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- cutoffAngle() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
Returns
the cutoff angle expression.
- cutoffDamping() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the damping
License requirements: None.
- cutoffDistance() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Cutoff Distance
License requirements: cam_base ("CAM BASE")
.
- cutoffDistanceBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the cutoff_distance builder
License requirements: cam_base ("CAM BASE")
.
- cutoffDistanceBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the cutoff_distance builder
License requirements: cam_base ("CAM BASE")
.
- cutoffFlag() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Cutoff Flag
License requirements: cam_base ("CAM BASE")
.
- cutoffFlag() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the Cutoff Flag
License requirements: cam_base ("CAM BASE")
.
- cutoffFlag() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the Cutoff Flag
License requirements: cam_base ("CAM BASE")
.
- cutoffFlagBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the cutoff_flag builder
License requirements: cam_base ("CAM BASE")
.
- cutoffFlagBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the cutoff_flag builder
License requirements: cam_base ("CAM BASE")
.
- cutoffFraction - Variable in class nxopen.cae.AfuMathFastRMSInfo.Data
-
The filter frequency cutoff fraction
- cutoffFrequencyIncrement() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the cutoff frequency increment
License requirements: None.
- cutoffLowerFrequency() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the cutoff lower frequency
License requirements: None.
- cutoffStock() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Cutoff Stock
License requirements: cam_base ("CAM BASE")
.
- cutoffStockBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the cutoff_stock builder
License requirements: cam_base ("CAM BASE")
.
- cutoffStockBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the cutoff_stock builder
License requirements: cam_base ("CAM BASE")
.
- cutoffText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the cutoff text
License requirements: None.
- cutoffType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the cutoff enum
License requirements: None.
- cutoffUpperFrequency() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the cutoff upper frequency
License requirements: None.
- cutOnlyAlongFloorAndWall() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the Cut Only Along Floor and Wall
License requirements: cam_base ("CAM BASE")
.
- cutOrder() - Method in interface nxopen.cam.GuidedCurveBuilder
-
Returns the Cut Order
License requirements: None.
- cutOrder() - Method in interface nxopen.cam.MillCutParameters
-
Returns the cut order
License requirements: None.
- cutOrder() - Method in interface nxopen.cam.WedmCutOrderBuilder
-
Returns the cut order
License requirements: cam_base ("CAM BASE")
.
- cutOrderType() - Method in interface nxopen.cam.GuidedCurveCutOrder
-
Returns the cut order
License requirements: None.
- cutOrientationAngle() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the cut orientation angle.
- CUTOUT - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
- Cutout2 - Interface in nxopen.features.shipdesign
-
Represents a cutout2 feature
To create or edit an instance of this class, use
Cutout2Builder
Created in NX8.0.0
- Cutout2Builder - Interface in nxopen.features.shipdesign
-
- Cutout2Builder.CreationMethod - Class in nxopen.features.shipdesign
-
available methods used to place a cutout object
- CUTOUT_ANGLE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Check profile cutout angle offset
- CUTOUT_CLEARANCE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Check cutout top and bottom clearance
- CUTOUT_FOR_REQUEST - Static variable in class nxopen.features.shipdesign.VerifyPenetrationBuilder.SelectionDialogType
-
- CUTOUT_TO_HOLE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Check cutout to hole
- CUTOUT_TO_SEAM - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
In basic design,check cutout to seam,In detail design,check cutout to edge
- cutoutData() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the sketch controlling the shape and parameters of the profile cutout.
- cutoutDefinition() - Method in interface nxopen.cam.LaserCircleCutout
-
Returns the Cutout Definition
License requirements: None.
- cutoutDefinition() - Method in interface nxopen.cam.LaserHexagonCutout
-
Returns the Cutout Definition
License requirements: None.
- cutoutDefinition() - Method in interface nxopen.cam.LaserRectangleCutout
-
Returns the Cutout Definition
License requirements: None.
- cutoutDefinition() - Method in interface nxopen.cam.LaserSlotCutout
-
Returns the Cutout Definition
License requirements: None.
- cutoutDefType() - Method in interface nxopen.cam.LaserCutoutDefinition
-
Returns the Cutout Definition Type
License requirements: None.
- cutoutDepth() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns the depth of the Drawn Cutout
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- cutoutLength() - Method in interface nxopen.features.PatchOpeningsBuilder
-
- cutoutPart() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the cutout part
License requirements: None.
- cutoutProfile() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the cutout profile
License requirements: None.
- cutoutRadius() - Method in interface nxopen.features.PatchOpeningsBuilder
-
- cutoutSection() - Method in interface nxopen.cam.LaserCutoutDefinition
-
Returns the Cutout Section
License requirements: None.
- cutParameters() - Method in interface nxopen.cam.ChamferMillingBuilder
-
- CutParameters - Interface in nxopen.cam
-
- cutParameters() - Method in interface nxopen.cam.CylinderMillingBuilder
-
- cutParameters() - Method in interface nxopen.cam.HoleDrillingBuilder
-
- cutParameters() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the cut parameter object
License requirements: None.
- cutParameters() - Method in interface nxopen.cam.MethodBuilder
-
Returns the cut parameter object
License requirements: cam_base ("CAM BASE")
.
- cutParameters() - Method in interface nxopen.cam.MillOperationBuilder
-
Returns the cut parameter object
License requirements: cam_base ("CAM BASE")
.
- cutParameters() - Method in interface nxopen.cam.OptimizeTraverseGroupBuilder
-
Returns the cut parameter object
License requirements: cam_base ("CAM BASE")
.
- cutParameters() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the cut parameter object
License requirements: None.
- cutParameters() - Method in interface nxopen.cam.ThreadMillingBuilder
-
- cutParameters() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the cut parameter object
License requirements: None.
- cutParameters() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the cut parameter object
License requirements: None.
- cutParameters() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the cut parameter object
License requirements: None.
- CutParametersActionWhenGougingTypes - Class in nxopen.cam
-
Available types for actions when gouging
- CutParametersAdjacentBladesTypes - Class in nxopen.cam
-
Available types for Adjacent Blades Option .
- CutParametersCleanupControlTypes - Class in nxopen.cam
-
Available types for cleanup control .
- CutParametersCornerFindingTypes - Class in nxopen.cam
-
Available types for Finding Corner Options .
- CutParametersCutConnectionTypes - Class in nxopen.cam
-
Available types for cut connection .
- CutParametersCutOrderTypes - Class in nxopen.cam
-
Available types for cut order
- CutParametersExtendAtStartMode - Class in nxopen.cam
-
Available modes for Turning Cutting Corners Extend At Start .
- CutParametersExtendFloorTypes - Class in nxopen.cam
-
extend floor to options .
- CutParametersFilletsTypes - Class in nxopen.cam
-
Available types for fillets .
- CutParametersFinishPassesTypes - Class in nxopen.cam
-
Available types for finish passes .
- CutParametersIpwTypes - Class in nxopen.cam
-
Available types for IPW
- CutParametersPatternDirectionTypes - Class in nxopen.cam
-
Available types for pattern direction
- CutParametersPlungeDirectionTypes - Class in nxopen.cam
-
Available types for plunge direction
- CutParametersProfileCutRegionsTypes - Class in nxopen.cam
-
Available types for profile .
- CutParametersRegionSequencingTypes - Class in nxopen.cam
-
Available types for region resequencing method
- CutParametersSimplifyShapesTypes - Class in nxopen.cam
-
Available types for simplify shapes method
- CutParametersToolRunOffTypes - Class in nxopen.cam
-
Available types for Tool Run Off Options .
- CutParametersTraverseOpenPassesTypes - Class in nxopen.cam
-
Available types for traverse open passes
- CutParametersTrimControlTypes - Class in nxopen.cam
-
Available types for trim control method
- cutPattern() - Method in interface nxopen.cam.AreaMillingContainment
-
Returns the cut pattern builder
License requirements: None.
- cutPattern() - Method in interface nxopen.cam.Blade
-
Returns the cut pattern builder
License requirements: None.
- cutPattern() - Method in interface nxopen.cam.CutPatternBuilder
-
Returns the cut pattern option
License requirements: None.
- cutPattern() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the cut pattern
License requirements: None.
- cutPattern() - Method in interface nxopen.cam.FlowCutSteepContainment
-
Returns the cut pattern builder
License requirements: None.
- cutPattern() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the cut pattern builder
License requirements: None.
- cutPattern() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the cut pattern
License requirements: None.
- CutPatternBuilder - Interface in nxopen.cam
-
Represents a Cut Pattern Builder .
- cutPatternBuilder() - Method in interface nxopen.cam.DmAmBuilder
-
Returns the cut pattern builder
License requirements: None.
- cutPatternBuilder() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the cut pattern builder
License requirements: None.
- cutPatternBuilder() - Method in interface nxopen.cam.DmRadBuilder
-
Returns the cut pattern builder
License requirements: None.
- cutPatternBuilder() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the cut pattern builder
License requirements: None.
- cutPatternBuilder() - Method in interface nxopen.cam.DmSurfBuilder
-
Returns the cut pattern builder
License requirements: None.
- cutPatternBuilder() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the cut pattern builder
License requirements: None.
- CutPatternBuilder.Types - Class in nxopen.cam
-
cut pattern options .
- cutPatternCenter() - Method in interface nxopen.cam.DmBndBuilder
-
Returns the Pattern Center
License requirements: None.
- cutPlaneLeg - Variable in class nxopen.uf.UFDraw.AskRevolvedSxlineData
-
- cutRegionExists - Variable in class nxopen.uf.UFTurn.AskCutRegionOfIndexData
-
- cutRegions() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Cut regions type
License requirements: None.
- CutRegionsBuilder - Interface in nxopen.cam
-
Represents a Cut Regions Builder .
- CutRegionsBuilder.CutRegionsContainmentTypes - Class in nxopen.cam
-
Available types for containment import options
- CutRegionsBuilder.CutRegionsProgramTypes - Class in nxopen.cam
-
Available types for program import options
- CutRegionsBuilder.CutRegionsStatusTypes - Class in nxopen.cam
-
Available types for status import options
- cutRegionsContainment() - Method in interface nxopen.cam.CutRegionsBuilder
-
Returns the containment type import option value
License requirements: None.
- CutRegionsData - Interface in nxopen.cam
-
Represents the Cut Regions data .
- cutRegionsData() - Method in interface nxopen.cam.Operation
-
Returns the Cut Regions Data
License requirements: cam_base ("CAM BASE")
.
- cutRegionSelectionMode() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the cut region selection mode
License requirements: cam_base ("CAM BASE")
.
- cutRegionSelectionPoint() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the cut region selection point
License requirements: cam_base ("CAM BASE")
.
- cutRegionsLocation - Variable in class nxopen.uf.UFTurn.AskCutRegionsExistData
-
- cutRegionsProgram() - Method in interface nxopen.cam.CutRegionsBuilder
-
Returns the program import option value
License requirements: None.
- cutRegionsStatus() - Method in interface nxopen.cam.CutRegionsBuilder
-
Returns the status type import option value
License requirements: None.
- cuts() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the option use cutting faces
License requirements: None.
- cutSchematicObjects(SheetElement[]) - Method in interface nxopen.ame.DiagramManager
-
Cut schematic object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- cutSection(Curve, boolean) - Method in interface nxopen.die.AddendumSectionBuilder
-
Cuts section in order to be pasted at another location.
- cutSelection() - Method in interface nxopen.cae.LaminateDrapingDataBuilder
-
Returns the selected cut curves.
- cutSequence() - Method in interface nxopen.cam.TurnGrooveCornerControl
-
Returns the Groove Corner Control cut sequence
License requirements: None.
- CutSheetBuilder - Interface in nxopen.annotations
-
Builder for Formboard cut sheet functionality used in formboard.
- cutSide() - Method in interface nxopen.cam.CutSideBuilder
-
Returns the cut side used for common block
License requirements: None.
- cutSide() - Method in interface nxopen.cam.GuidedCurveBuilder
-
Returns the Cut Side
License requirements: None.
- CutSideBuilder - Interface in nxopen.cam
-
Represents a cut side builder
This is an abstract class and cannot be instantiated.
- CutSideBuilder.Option - Class in nxopen.cam
-
Enum of cut side
- CutSides - Interface in nxopen.cam
-
Represents a Cut Sides Builder .
- CutSides.SideType - Class in nxopen.cam
-
Available types for sides to cut
- cutStart() - Method in interface nxopen.cam.BladeRough
-
Returns the cut start location builder
License requirements: None.
- cutStart() - Method in interface nxopen.cam.HubFinish
-
Returns the cut start location builder
License requirements: None.
- cutStepBuilder() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the cut step builder
License requirements: None.
- cutStepFirstCut() - Method in interface nxopen.cam.DPMItpBuilder
-
- cutStepSecondCut() - Method in interface nxopen.cam.DPMItpBuilder
-
- cutStepThirdCut() - Method in interface nxopen.cam.DPMItpBuilder
-
- cutStepType() - Method in interface nxopen.cam.DmStreamlineCutStep
-
Returns the cut step type which defines different cut steps including tolerances and points number
License requirements: None.
- cutStock - Variable in class nxopen.uf.UFCamgeom.AppData
-
- CutStrategy - Interface in nxopen.cam
-
Represents cut strategy .
- cutStrategy() - Method in interface nxopen.cam.RoughTurningBuilder
-
Returns the Cut Strategy
License requirements: None.
- CutStrategy.Types - Class in nxopen.cam
-
The cut strategy options .
- cutSystemObject(SystemObject[]) - Method in interface nxopen.mechatronics.MechatronicsManager
-
Cuts the system engeering objects.
- cutter() - Method in interface nxopen.UFSession
-
- CUTTER_CONVERSION_PROBLEM - Static variable in class nxopen.cam.CAMObject.Attr
-
- cutterClearance() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the cutter clearance angles builder
License requirements: None.
- CutterExport - Interface in nxopen.cam
-
Represents Cutter Export Builder .
- CutterExport.HolderExportStatus - Class in nxopen.cam
-
the holder export status
- CutterExport.SaveFlags - Class in nxopen.cam
-
the save flag options
- CutterExport.TrackpointExportStatus - Class in nxopen.cam
-
the trackpoint export status
- CutterExport.ValidValuesOfAttributeData - Class in nxopen.cam
-
- cutterExportBuilder() - Method in interface nxopen.cam.ToolBuilder
-
Returns the cutter export builder
License requirements: None.
- cutterId() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the cutter id string to identify a cutter within a multitool
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- cutterSubtype() - Method in interface nxopen.cam.MillToolBuilder
-
Returns the cutter subtypes
License requirements: None.
- cutThruModel - Variable in class nxopen.uf.UFDraw.BreakoutData
-
- CUTTING - Static variable in class nxopen.cam.DrillTapToolBuilder.ToolThreadFormMethodTypes
-
cutting
- CUTTING - Static variable in class nxopen.cam.NcmSmoothingBuilder.SmoothToleranceSources
-
use cutting tolerance type
- CUTTING_ANGLE - Static variable in class nxopen.cam.ToolAxisInterpolate.TurnInputModeTypes
-
cutting angle
- CUTTING_EDGE_ANGLE - Static variable in class nxopen.cam.TurnToolBuilder.HolderShankDefinitionModes
-
cutting edge angle mode
- CUTTING_MODE_CUT - Static variable in class nxopen.uf.UFSim.CuttingMode
-
- CUTTING_MODE_NONE - Static variable in class nxopen.uf.UFSim.CuttingMode
-
- CUTTING_MODE_RAPID - Static variable in class nxopen.uf.UFSim.CuttingMode
-
- CUTTING_PLANE - Static variable in class nxopen.cae.Post.Target
-
- CUTTING_PLANE_SYMBOL - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI Cutting Symbol Type
- cuttingClearance() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the cutting clearance
License requirements: None.
- cuttingDirection() - Method in interface nxopen.cam.FeatureMillingCutParameters
-
Returns the cut direction
License requirements: None.
- cuttingDistance() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the cutting distance
License requirements: None.
- cuttingInterfaceConfigFile() - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
Returns the Cutting Interface configuration file
License requirements: None.
- cuttingInterfaceOutputFile() - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
Returns the Cutting Interface output XML file
License requirements: None.
- cuttingLength() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the cutting length
License requirements: None.
- cuttingParameters() - Method in interface nxopen.cam.HoleMachiningBuilder
-
Returns the Cut Parameters
License requirements: None.
- cuttingPerimeter() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the cutting perimeter length for EDM of the process.
- CuttingPlaneSymbol - Interface in nxopen.annotations
-
Represents a Cutting Plane Symbol
Created with LightweightSection
.
- cuttingPlaneSymbol() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the cutting plane symbol
License requirements: None.
- cuttingPlaneSymbolArrowDirection() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the cutting plane symbol arrow direction related to plane
License requirements: None.
- cuttingPlaneSymbolArrowLength() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the cutting plane symbol arrow length
License requirements: None.
- CuttingPlaneSymbolBuilder - Interface in nxopen.annotations
-
- CuttingPlaneSymbolBuilder.ArrowDirectionOption - Class in nxopen.annotations
-
Represents position of the arrow direction relative to cutting plane
- CuttingPlaneSymbolBuilder.TextPlaneRelativeArrow - Class in nxopen.annotations
-
Represents position of the text relative to the arrow option
- CuttingPlaneSymbolBuilder.ViewNameFormatOption - Class in nxopen.annotations
-
Represents whether the view name is derived from the PMI cutting plane symbol text.
- cuttingPlaneSymbolColor() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the cutting plane symbol color
License requirements: None.
- cuttingPlaneSymbolSectionPrefix() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the section prefix for cutting plane symbol
License requirements: None.
- cuttingPlaneSymbolShadedPlane() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the cutting plane symbol shaded plane option
License requirements: None.
- cuttingPlaneSymbolStartingLetter() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the starting letter for cutting plane symbol
License requirements: None.
- cuttingPlaneSymbolText() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the Cutting Plane Symbol text
License requirements: None.
- cuttingPlaneSymbolTextPlaneRelativeToArrow() - Method in interface nxopen.annotations.PmiPreferences
-
Returns the orientation of the cutting plane symbol text plane with respect to arrow plane
License requirements: None.
- cuttingSideFaces() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
Returns the faces to identify, or attribute, as cutting side.
- cuttingSideFaces() - Method in interface nxopen.features.shipdesign.MarkingLineBuilder
-
Returns the cutting side face
License requirements: None.
- CuttingSideFacesBuilder - Interface in nxopen.features.shipdesign
-
Used to create a
CuttingSideFacesBuilder
which
is used to attribute the cutting side, and opposing cutting side, faces on the plate bodies.
- CuttingSideFacesBuilder.Types - Class in nxopen.features.shipdesign
-
Type of operation to perform on the plate.
- cutToBoundary() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the value of option, which specifies whether to cut the target to boundary objects or not.
- cutType() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the cut type
License requirements: cam_base ("CAM BASE")
.
- cutType() - Method in interface nxopen.cam.DPMTubeBuilder
-
Returns the cut pattern builder
License requirements: None.
- cutType() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut type
License requirements: None.
- cutType() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the cut type for the normal cutout.
- cutType() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the cutting type
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- CutView - Interface in nxopen
-
Represents a Cut View
Cut Views may only be created via a Master Cut Builder.
- cutView() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the cut view
License requirements: solid_modeling ("SOLIDS MODELING")
.
- CutViewCollection - Interface in nxopen
-
Represents a collection of
CutView
objects.
- CutViewCollection.IsCutBodyOfViewData - Class in nxopen
-
- CutViewCollection.IsUncutBodyOfViewData - Class in nxopen
-
- cutViews() - Method in interface nxopen.Part
-
Returns the CutViewCollection instance belonging to this part .
- cutViewUpdateDelayed() - Method in interface nxopen.preferences.PartModeling
-
Returns the state of the cut view delay update flag.
- cutVolume() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the calculated cut volume
License requirements: None.
- CutVolume - Interface in nxopen.cam
-
The classs represent the sub builder for creating cut volume feature items
To create a new instance of this class, use
CutVolumeGeom.createCutVolume()
Created in NX8.0.0
- CutVolumeGeom - Interface in nxopen.cam
-
The classs represent the builder for creating cut volume features .
- cutVolumeGeom() - Method in interface nxopen.cam.GeometryCiBuilder
-
Returns the cut volume geometry
License requirements: cam_base ("CAM BASE")
.
- CutVolumeList - Interface in nxopen.cam
-
Represents a list of objects.
- cutVolumes() - Method in interface nxopen.cam.CutVolumeGeom
-
Returns the features
License requirements: None.
- cutWallsOnly() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Cut Walls Only toggle
License requirements: None.
- CYAN_CYAN_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- CYAN_CYAN_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- CYCLE - Static variable in class nxopen.cam.CamOperationMotionType
-
- CYCLE - Static variable in class nxopen.cam.CamPathMotionType
-
- Cycle - Interface in nxopen.cam
-
Represets a User Defined Event .
- CYCLE - Static variable in class nxopen.preferences.RoutingPath.ChainMethod
-
Return all chains
- cycle() - Method in interface nxopen.SketchIntersectionPointBuilder
-
Method to get the next alternate solution
License requirements: solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- Cycle.CutMode - Class in nxopen.cam
-
Available types for fixed cut
- Cycle.DwellType - Class in nxopen.cam
-
Available types for dwell
- Cycle.MotionOutputTypes - Class in nxopen.cam
-
Available types for motion output
- CYCLE800 - Static variable in class nxopen.sim.MachineToolConfiguration.SwivelingTypes
-
The CYCLE800 swiveling type
- CYCLE_TRACKING_POINT - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthReferenceTypes
-
Depth Reference options: Cycle Tracking Point
- cycleAll(Tag, Tag) - Method in interface nxopen.uf.UFObj
-
- cycleByLayer(int, Tag) - Method in interface nxopen.uf.UFLayer
-
- cycleByName(String, Tag) - Method in interface nxopen.uf.UFObj
-
- cycleByNameAndType(Tag, String, int, boolean, Tag) - Method in interface nxopen.uf.UFObj
-
- cycleByNameAndTypeExtended(Tag, String, int, boolean, Tag) - Method in interface nxopen.uf.UFObj
-
- CycleCoolant - Interface in nxopen.cam
-
Represets a User Defined Event .
- CycleCoolant.Flow - Class in nxopen.cam
-
Available types for coolant flow mode
- CycleDwell - Interface in nxopen.cam
-
Represets a User Defined Event .
- CycleDwell.Mode - Class in nxopen.cam
-
Available types for dwell mode
- cycleEntsInPartOcc(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- cycleErrors(int) - Method in interface nxopen.uf.UFPatt
-
- CycleErrorsData() - Constructor for class nxopen.uf.UFPatt.CycleErrorsData
-
- cycleEvent() - Method in interface nxopen.cam.ParamBuilder
-
Returns the cycle event
License requirements: cam_base ("CAM BASE")
.
- cycleFacets(Tag, int) - Method in interface nxopen.uf.UFFacet
-
- cycleFacetsInFace(Tag, int, int) - Method in interface nxopen.uf.UFFacet
-
- cycleFlag - Variable in class nxopen.uf.UFDrf.AskAnnData
-
- cycleInstOfPart(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- CycleNodragClearance - Interface in nxopen.cam
-
Represets a User Defined Event .
- cycleObjects(Tag, UFView.CycleObjects, Tag) - Method in interface nxopen.uf.UFView
-
- cycleObjectsInView(NXObject, int, boolean, NXObject) - Method in interface nxopen.tooling.AutoDimensionBuilder
-
The method to cycle objects in view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- cycleObjectsInView(NXObject, int, boolean, NXObject) - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
The method to cycle objects in view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- cycleObjectsInView(NXObject, int, boolean, NXObject) - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
The method to cycle objects in view
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- cycleObjsInComp(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- cycleObjsInPart(Tag, int, Tag) - Method in interface nxopen.uf.UFObj
-
- cycleObjsInPart1(Tag, int, Tag) - Method in interface nxopen.uf.UFObj
-
- cyclePaths() - Method in interface nxopen.routing.ManualRouteBuilder
-
Cycle paths through filter paths array to enable user select path for routing.
- cycleRoutingPorts() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Cycles through the ports on the selected routing component.
- CYCLES - Static variable in class nxopen.cae.XyFunctionMeasure
-
Cycles unit
- CYCLES_DUTY - Static variable in class nxopen.cae.XyFunctionUnit
-
Cycles unit: duty cycles
- CYCLES_TO_FAILURE - Static variable in class nxopen.uf.UFSf.DursolDesignLifeCriterion
-
- cycleSolution() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
The button used to cycle through possible solutions
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- CycleSpindle - Interface in nxopen.cam
-
Represets a User Defined Event .
- CycleSpindle.Mode - Class in nxopen.cam
-
Available types for spindle mode
- CycleStepRetract - Interface in nxopen.cam
-
Represets a User Defined Event .
- cyclesToFailure() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the cycles to failure.
- cycleTable() - Method in interface nxopen.cam.ParamBuilder
-
Returns the cycle
License requirements: cam_base ("CAM BASE")
.
- cycleTime() - Method in interface nxopen.sim.MachineToolConfiguration
-
Returns the cycle time
License requirements: None.
- CycleTipRelease - Interface in nxopen.cam
-
Represets a User Defined Event .
- cycleTrackingPoint() - Method in interface nxopen.cam.Cycle
-
Returns the tracking point
License requirements: None.
- cycleType() - Method in interface nxopen.cam.Cycle
-
Returns the cycle type
License requirements: None.
- cycleType() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the cycle type
License requirements: None.
- cycleTypedObjsInPart(Tag, int, Tag) - Method in interface nxopen.uf.UFObj
-
- CYCLIC - Static variable in class nxopen.mechatronics.CamProfileBuilder.ProfileCyclicType
-
In Cyclic Cam Profiles the points at the beginning
and the end of the Master Axis range need to be identical
with respect to Slave Axis value, slope and curve.
- CYCLIC - Static variable in class nxopen.mechatronics.MotionProfileBuilder.ProfileCyclicType
-
Cyclic
- CYCLIC_REACTION_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- CYCLIC_REACTION_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- CYCLIC_SYMMETRY - Static variable in class nxopen.cae.optimization.TBSTopologyLinkCondition.SymmetryOption
-
Cyclic symmetry definition
- CYCLIC_WORST_PRINCIPAL_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- CYCLIC_WORST_PRINCIPAL_STRAIN_ANGLE - Static variable in class nxopen.cae.Result.Quantity
-
- CYCLIC_WORST_PRINCIPAL_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- CYCLIC_WORST_PRINCIPAL_STRESS_ANGLE - Static variable in class nxopen.cae.Result.Quantity
-
- cyclicStressStrainModel() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the cyclic stress strain model.
- CyclicSymmetricParameters - Interface in nxopen.cae
-
Implementation of axi-symmetry utility
To obtain an instance of this class use.
- CyclicSymmetricParameters.EnvelopeValue - Class in nxopen.cae
-
Selection envelope value of sector
- CyclicSymmetricParameters.GetResult - Class in nxopen.cae
-
Cyclic Symmetric result type
- CyclicSymmetricParameters.OriginalResult - Class in nxopen.cae
-
Cyclic Symmetric original model result type
- CyclicSymmetricParameters.SectorCriteria - Class in nxopen.cae
-
Select sector by value or index
- CyclicSymmetricParameters.Value - Class in nxopen.cae
-
Selection value of sector
- cyclicType() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Returns the cyclic type of a cam profile
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- cyclicType() - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
Returns the cyclic type of a cam profile
License requirements: None.
- cylFace - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- CYLINDER - Static variable in class nxopen.cae.Mesh2dBuilder.GeometryType
-
Deprecated.
Cylinder
- CYLINDER - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Cylinder
- CYLINDER - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.FeatureType
-
Cylinder alignment feature type
- CYLINDER - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Cylinder Feature
- CYLINDER - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Cylinder
- CYLINDER - Static variable in class nxopen.cam.InspectionMoveBuilder.ProbeTipTypes
-
Cylinder tip
- CYLINDER - Static variable in class nxopen.cam.InspectionProbeTrackingBuilder.TipTypes
-
Cylinder
- CYLINDER - Static variable in class nxopen.cam.InspectionSensorBuilder.SensorTipTypes
-
Cylinder
- CYLINDER - Static variable in class nxopen.cam.NcmClearanceBuilder.ClearanceTypes
-
clearance cylinder
- cylinder() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the cylinder to probe
License requirements: None.
- CYLINDER - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Geometry
-
Cylinder
- cylinder() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the cylinder to inspect
License requirements: None.
- CYLINDER - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Geometry
-
Cylinder
- Cylinder - Interface in nxopen.features
-
Represents a cylinder feature
To create or edit an instance of this class, use
CylinderBuilder
Created in NX5.0.0
- CYLINDER - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder.Types
-
Deprecated.
- CYLINDER - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx.Types
-
- CYLINDER - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.AlignFillerSurfaceType
-
Generalized cylindrical developable surface.
- CYLINDER - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Cylinder
- CYLINDER - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Cylinder
- CYLINDER - Static variable in class nxopen.tooling.DieInsertBuilder.BoundingBoxTypeItems
-
The bounding box type is Cylinder
- CYLINDER - Static variable in class nxopen.tooling.ElectrodeBlankBuilder.BlankShape
-
the shape of the blank is cylinder
- CYLINDER - Static variable in class nxopen.tooling.StockSizeBuilder.Shape
-
The shape is a cylinder
- CYLINDER - Static variable in class nxopen.tooling.StockSizeBuilder.Types
-
The shape is a cylinder
- CYLINDER - Static variable in class nxopen.tooling.SubInsertBuilder.Shape
-
The shape is a cylinder
- CYLINDER - Static variable in class nxopen.weld.DatumCommonBuilder.SolidTypes
-
Datum solid will be a cylinder
- CYLINDER_CSYS_DIAMETER_AND_HEIGHT - Static variable in class nxopen.cae.CaeBoundingVolumePrimitiveType
-
- CYLINDER_DENSITY - Static variable in class nxopen.cae.MeshControlBuilder.Types
-
- CYLINDER_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- CYLINDER_JOINT - Static variable in class nxopen.uf.UFMotion.JointType
-
- CYLINDER_PLANE_CYLINDER - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
Cylinder, Plane, Cylinder alignment type
- CYLINDER_PLANE_PLANE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
Cylinder, Plane, Plane alignment type
- CYLINDER_PLANE_POINT - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.AlignType
-
Cylinder, Plane, Point alignment type
- CYLINDER_TWO_POINTS_AND_DIAMETER - Static variable in class nxopen.cae.CaeBoundingVolumePrimitiveType
-
- cylinderAxialElementSize() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder axial element size
License requirements: None.
- cylinderAxialElementSizeOption() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder axial element size option
License requirements: None.
- cylinderAxialNumElements() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder axial num elements
License requirements: None.
- CylinderBoundingVolume - Interface in nxopen.cae
-
Represents Box Bounding Volume for Selection Recipe
This is a sub object
.
- CylinderBoundingVolume.CsysDiameterHeightData - Class in nxopen.cae
-
- CylinderBoundingVolume.EndpointsDiameterData - Class in nxopen.cae
-
- CylinderBuilder - Interface in nxopen.features
-
- CylinderBuilder.Types - Class in nxopen.features
-
the cylinder types
- cylinderCircleFitMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the analysis cylinder/circle fitting mode
License requirements: None.
- cylinderCircleFitModeBuilder() - Method in interface nxopen.cam.InspectionArcFeatureBuilder
-
Returns the Cylinder Circle Fitting Mode Builder
License requirements: None.
- cylinderCircleFitModeBuilder() - Method in interface nxopen.cam.InspectionCircleFeatureBuilder
-
Returns the Cylinder Circle Fitting Mode Builder
License requirements: None.
- cylinderCircleFitModeBuilder() - Method in interface nxopen.cam.InspectionConeFeatureBuilder
-
Returns the Cylinder Circle Fitting Mode Builder
License requirements: None.
- cylinderCircleFitModeBuilder() - Method in interface nxopen.cam.InspectionCylinderFeatureBuilder
-
Returns the Cylinder Circle Fitting Mode Builder
License requirements: None.
- cylinderCircularNumElements() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder circular num elements
License requirements: None.
- cylinderCircularNumPerQuarter() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder circular num by degrees
License requirements: None.
- cylinderCircularSizeOption() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder circular size option
License requirements: None.
- cylinderDensitySize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the cylinder density size
License requirements: None.
- CylinderFaceMethod - Interface in nxopen.cae
-
Represents the output from the cylinder face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- cylinderFitting() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the analysis cylinder/circle fitting type
License requirements: None.
- cylinderFreezeGeometryOption() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the selection cylinder freeze geometry option
License requirements: None.
- cylinderheight - Variable in class nxopen.cae.CylinderBoundingVolume.CsysDiameterHeightData
-
- cylinderHeight() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the expression containing the value for the cylinder height.
- cylinderMaxAngle() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder max angle
License requirements: None.
- cylinderMaxRadius() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder max radius
License requirements: None.
- CylinderMilling - Interface in nxopen.cam
-
Represents a Cylinder Milling Operation
To create or edit an instance of this class, use
CylinderMillingBuilder
Created in NX9.0.1
- CylinderMillingBuilder - Interface in nxopen.cam
-
- CylinderMillingBuilder.BlankDiameterTypes - Class in nxopen.cam
-
blank diamter options .
- CylinderMillingBuilder.CutPatternTypes - Class in nxopen.cam
-
cut pattern options .
- CylinderMillingBuilder.DepthPerRevolutionTypes - Class in nxopen.cam
-
Depth Per Revolution options .
- CylinderMillingBuilder.DiameterForHelixTypes - Class in nxopen.cam
-
Diameter for Helix .
- CylinderMillingCutParameters - Interface in nxopen.cam
-
Represents a CylinderMillingCutParameters Builder .
- CylinderMillingCutParameters.CutDirectionTypes - Class in nxopen.cam
-
cut direction options .
- cylinderMinAngle() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder min angle
License requirements: None.
- cylinderMinRadius() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the cylinder min radius
License requirements: None.
- cylinderRadius() - Method in interface nxopen.features.CircularBlendCurveBuilder
-
- cylinderRadius() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the expression containing the value for the cylinder radius.
- cylinders() - Method in interface nxopen.mechatronics.HydraulicValveBuilder
-
Returns the Cylinder.
- cylinders() - Method in interface nxopen.mechatronics.PneumaticValveBuilder
-
Returns the Cylinders.
- cylinderType() - Method in interface nxopen.tooling.StockSizeBuilder
-
- CYLINDRICAL - Static variable in class nxopen.annotations.DatumTargetBuilder.Types
-
cylindrical
- CYLINDRICAL - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod
-
Linear measurement method representing a diameter
- CYLINDRICAL - Static variable in class nxopen.annotations.DimensionType
-
Cylindrical dimension
- CYLINDRICAL - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies cylindrical characteristics
- CYLINDRICAL - Static variable in class nxopen.annotations.SearchCriteriaCalloutBuilder.CalloutTypes
-
Cylindrical
- CYLINDRICAL - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetTypes
-
cylindrical type
- CYLINDRICAL - Static variable in class nxopen.annotations.ToleranceZoneShape
-
Specifies cylindrical zone shape
- CYLINDRICAL - Static variable in class nxopen.cae.AssignNodalCSBuilder.CSType
-
cylindrical
- CYLINDRICAL - Static variable in class nxopen.cae.BushingEADBuilder.CoordinateSystemDataType
-
use cylindrical coordinate system data to orient the element
- CYLINDRICAL - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsCsysDataType
-
Use cylindrical coordinate system data to orient the material.
- CYLINDRICAL - Static variable in class nxopen.cae.connections.ConnectionDBItemStiffnessType
-
Cylindrical
- CYLINDRICAL - Static variable in class nxopen.cae.NodalForceReportBuilder.CSType
-
- CYLINDRICAL - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CsysType
-
- CYLINDRICAL - Static variable in class nxopen.cae.ShellEADBuilder.CoordinateSystemDataType
-
use cylindrical coordinate system data to orient the material
- CYLINDRICAL - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolZoneShape
-
Cylindrical
- CYLINDRICAL - Static variable in class nxopen.die.QuickBinderBuilder.Types
-
cylindrical
- CYLINDRICAL - Static variable in class nxopen.die.QuickBinderWrapBuilder.Types
-
Cylidrical
- CYLINDRICAL - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
-
Deprecated.
for cylindrical model
- CYLINDRICAL - Static variable in class nxopen.display.IrayPlusSimpleMaterialEditorBuilder.TextureSpace
-
- CYLINDRICAL - Static variable in class nxopen.Face.FaceType
-
Cylindrical face
- CYLINDRICAL - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType
-
Cylindrical face
- CYLINDRICAL - Static variable in class nxopen.fields.SpatialMap.TypeEnum
-
Map to cylindrical csys
- CYLINDRICAL - Static variable in class nxopen.motion.BushingBuilder.BushingTypes
-
Cylindrical type bushing
- CYLINDRICAL - Static variable in class nxopen.motion.JointDefine.Type
-
This joint type is a single rotation and
a single translation.
- CYLINDRICAL - Static variable in class nxopen.positioning.Constraint.Type
-
For internal use only
- CYLINDRICAL_FACE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- CYLINDRICAL_IRONING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
cylindrical ironing
- CYLINDRICAL_REGION - Static variable in class nxopen.annotations.RegionBuilder.Types
-
cylindrical
- CYLINDRICAL_ROOM - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Cylindrical room.
- CYLINDRICAL_TEXTURE_SPACE - Static variable in class nxopen.uf.UFDisp.TextureSpaceType
-
- CYLINDRICAL_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- cylindricalActuatorCoefficients() - Method in interface nxopen.motion.BushingActuatorCoefficients
-
Returns the cylindrical actuator coefficients.
- CylindricalBushing() - Constructor for class nxopen.uf.UFMotion.CylindricalBushing
-
- CylindricalBushing(String, Tag, Tag, Tag, Tag, Tag, Tag, double, double, double, double, double, double, double, double) - Constructor for class nxopen.uf.UFMotion.CylindricalBushing
-
- cylindricalCoefficients() - Method in interface nxopen.motion.BushingCoefficients
-
- CylindricalCoordinateSystem - Interface in nxopen
-
- cylindricalDampingCoefficients() - Method in interface nxopen.motion.BushingDampingCoefficients
-
Returns the cylindrical damping coefficients.
- CylindricalDimension - Interface in nxopen.annotations
-
Represents a cylindrical dimension
To create or edit an instance of this class, use
LinearDimensionBuilder
Created in NX4.0.0
- cylindricalExtension() - Method in interface nxopen.annotations.AutomaticCenterlineBuilder
-
Returns the cylindrical extension
License requirements: None.
- CylindricalJoint - Interface in nxopen.mechatronics
-
Represents the Cylindrical Joint.
- CylindricalJointBuilder - Interface in nxopen.mechatronics
-
- CylindricalJointCollection - Interface in nxopen.mechatronics
-
Represents a collection of Cylindrical Joint.
- cylindricalJoints() - Method in interface nxopen.mechatronics.PhysicsManager
-
- CylindricalMillingBuilder - Interface in nxopen.cam
-
Represents a CylindricalMilling Builder
This is an abstract class and cannot be instantiated.
- CylindricalMillingCutParameters - Interface in nxopen.cam
-
Represents a CylindricalMillingCutParameters Builder
This is an abstract class and cannot be instantiated.
- cylindricalStiffnessCoefficients() - Method in interface nxopen.motion.BushingStiffnessCoefficients
-
Returns the cylindrical stiffness coefficients.
- CYLINDRICITY - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
cylindricity
- CYLINDRICITY - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
cylindricity
- CYLINDRICITY - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Cylindricity
- cylTolerance() - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
Returns the cyl tolerance
License requirements: None.
- CYRILLIC - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Russian Cyrillic character set
- cysmatrix - Variable in class nxopen.tooling.StockSizeBuilder.CalculateBoxSizeData
-