public interface SpecialPiercingInsertBuilder extends Builder
ProgressiveDieManager.createSpecialPiercingInsertBuilder()
Property | Value |
---|---|
BoundBox | BoundedBlock |
EndLimit.Value | 0 (millimeters part), 0 (inches part) |
InsertPosition | Bottom |
NormalBbpslug | Fillet |
NormalCavity | TaperAngle |
NormalClearance | 0.05 |
NormalDsslug | Fillet |
NormalOffsetSide | DieSide |
NormalSlugPara1 | 3 |
NormalSlugPara2 | -3 |
NormalSlugPara3 | 2 |
NormalSlugPara4 | 3 |
OffsetLinearDimension.Value | 3 (millimeters part), 0.12 (inches part) |
ParentPart | ProjectDie |
PlateClearanceFirst | 0 |
PlateClearanceFourth | 0 |
PlateClearanceSecond | 0 |
PlateClearanceThird | 0 |
PunchOrDie | Punch |
RenameComponent | 0 |
SlugHoleHeightLinearDimension.Value | 100 (millimeters part), 4 (inches part) |
StandardOrUserDefined | Standard |
StartLimit.Value | 0 (millimeters part), 0 (inches part) |
UsePlateClearanceFirst | 0 |
UsePlateClearanceFourth | 0 |
UsePlateClearanceSecond | 0 |
UsePlateClearanceThird | 0 |
Modifier and Type | Interface and Description |
---|---|
static class |
SpecialPiercingInsertBuilder.BoundBoxType
Specifies the bounded box type block or cylinder.
|
static class |
SpecialPiercingInsertBuilder.InsertPositionTypes
Specifies the position of piercing inserts, for EDW only
|
static class |
SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType
Specifies the type of bottom plate slug.
|
static class |
SpecialPiercingInsertBuilder.NormalCavityType
Specifies the type of cavity.
|
static class |
SpecialPiercingInsertBuilder.NormalDieShoeSlugType
Specifies the type of die shoe slug.
|
static class |
SpecialPiercingInsertBuilder.NormalOffsetSideType
Specifies the offset side of normal pierce insert design.
|
static class |
SpecialPiercingInsertBuilder.ParentPartTypes
Specifies the parent part type.
|
static class |
SpecialPiercingInsertBuilder.PunchOrDieTypes
Specifies the parent part type.
|
static class |
SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes
Specifies the parent part type.
|
static class |
SpecialPiercingInsertBuilder.Types
Specifies the parent part type.
|
Modifier and Type | Method and Description |
---|---|
NXObject |
addInsertPartIntoAssembly(NXObject parentPart,
String templatePartName,
Point3d origin)
Add insert part into assembly.
|
SpecialPiercingInsertBuilder.BoundBoxType |
boundBox()
Returns the block or cylinder
License requirements: None. |
Point3d |
boxPosition()
Returns the position of csys for box.
|
void |
calculateBoxSize()
Calculate box size and set directions, edge length, lower point position.
|
void |
createDatumPlane()
The create datum plane
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
createIntersect(NXObject targetBody,
NXObject bodyOfKFBoundBox)
Create intersect.
|
NXObject |
createKFBoundBox(Matrix3x3 wcsMatrix,
double[] clearance,
NXObject[] faces)
Create bound box.
|
void |
createOffsetDatumPlane()
Create offset datum plane
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
deleteSelectedInsertAndWaveLinkedSource()
Delete selected insert and wave linked source feature.
|
Expression |
endLimit()
Returns the end limit
License requirements: None. |
Edge |
getCorrectEdgeInNewPart(Part partTag,
Edge sourceEdge)
Get correct edge in new part
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
Face[] |
getCorrectFacesOfExtractRegionFeature()
Get correct faces of extrac region feature.
|
NXObject |
getHoleBoundaryFaceAndCreatePatchOpenings(NXObject[] edges)
Get hole boundary face and create patch openings.
|
Curve[] |
getProfile(Section sectionTag)
Get profiles
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
Curve[] |
getWaveLinkedCurves()
Get wave linked curves
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
SpecialPiercingInsertBuilder.InsertPositionTypes |
insertPosition()
Returns the reverse direction
License requirements: None. |
boolean |
is3DCurves()
Returns the result whether the curves is three dimensional
License requirements: None. |
SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType |
normalBbpslug()
Returns the bottom plate slug type for normal pierce design.
|
SpecialPiercingInsertBuilder.NormalCavityType |
normalCavity()
Returns the cavity type for normal pierce design.
|
double |
normalClearance()
Returns the clearance value for normal pierce design.
|
SpecialPiercingInsertBuilder.NormalDieShoeSlugType |
normalDsslug()
Returns the die shoe slug type for normal pierce design.
|
SpecialPiercingInsertBuilder.NormalOffsetSideType |
normalOffsetSide()
Returns the offset side option for normal pierce design.
|
double |
normalSlugPara1()
Returns the H value of slug hole for normal pierce design.
|
double |
normalSlugPara2()
Returns the A value of slug hole for normal pierce design.
|
double |
normalSlugPara3()
Returns the C1 value of slug hole for normal pierce design.
|
double |
normalSlugPara4()
Returns the C2 value of slug hole for normal pierce design.
|
Expression |
offsetLinearDimension()
Returns the offset linear dimension
License requirements: None. |
Expression |
offsetValueLinearDimensionNegativeX()
Returns the offset value linear dimension negative x
License requirements: None. |
Expression |
offsetValueLinearDimensionNegativeY()
Returns the offset value linear dimension negative y
License requirements: None. |
Expression |
offsetValueLinearDimensionNegativeZ()
Returns the offset value linear dimension negative z
License requirements: None. |
Expression |
offsetValueLinearDimensionPositiveX()
Returns the offset value linear dimension positive x
License requirements: None. |
Expression |
offsetValueLinearDimensionPositiveY()
Returns the offset value linear dimension positive y
License requirements: None. |
Expression |
offsetValueLinearDimensionPositiveZ()
Returns the offset value linear dimension positive z
License requirements: None. |
SpecialPiercingInsertBuilder.ParentPartTypes |
parentPart()
Returns the parent part
License requirements: None. |
String |
parentPartName()
Returns the parent part name to create insert.
|
double |
plateClearanceFirst()
Returns the plate clearance first
License requirements: None. |
double |
plateClearanceFourth()
Returns the plate clearance fourth
License requirements: None. |
double |
plateClearanceSecond()
Returns the plate clearance second
License requirements: None. |
double |
plateClearanceThird()
Returns the plate clearance third
License requirements: None. |
SpecialPiercingInsertBuilder.PunchOrDieTypes |
punchOrDie()
Returns the punch or die
License requirements: None. |
Expression |
radialOffset()
Returns the radial offset value for cylinder box
License requirements: None. |
boolean |
renameComponent()
Returns the rename component
License requirements: None. |
Section |
selectCurves()
Returns the select curves
License requirements: None. |
SelectEdgeList |
selectEdges()
Returns the select curve
License requirements: None. |
SelectFaceList |
selectFace()
Returns the select face
License requirements: None. |
SelectNXObjectList |
selectInsert()
Returns the select insert
License requirements: None. |
Direction |
selectVector()
Returns the select vector
License requirements: None. |
void |
setBoundBox(SpecialPiercingInsertBuilder.BoundBoxType boundBoxType)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setBoxMatrixAndPosition(Matrix3x3 matrix,
Point3d position)
Sets box csys matrix.
|
void |
setBoxPosition(Point3d csysOrigin)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setInsertPosition(SpecialPiercingInsertBuilder.InsertPositionTypes insertPosition)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setIs3DCurves(boolean is3DCurves)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setNormalBbpslug(SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType normalBbpslug)
License requirements: None. |
void |
setNormalCavity(SpecialPiercingInsertBuilder.NormalCavityType normalCavity)
License requirements: None. |
void |
setNormalClearance(double normalClearance)
License requirements: None. |
void |
setNormalDsslug(SpecialPiercingInsertBuilder.NormalDieShoeSlugType normalDsslug)
License requirements: None. |
void |
setNormalOffsetSide(SpecialPiercingInsertBuilder.NormalOffsetSideType normalOffsetSide)
License requirements: None. |
void |
setNormalSlugPara1(double normalSlugPara1)
License requirements: None. |
void |
setNormalSlugPara2(double normalSlugPara2)
License requirements: None. |
void |
setNormalSlugPara3(double normalSlugPara3)
License requirements: None. |
void |
setNormalSlugPara4(double normalSlugPara4)
License requirements: None. |
void |
setParentPart(SpecialPiercingInsertBuilder.ParentPartTypes parentPart)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setParentPartName(String parentPart)
License requirements: None. |
void |
setPlateClearanceFirst(double plateClearanceFirst)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setPlateClearanceFourth(double plateClearanceFourth)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setPlateClearanceSecond(double plateClearanceSecond)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setPlateClearanceThird(double plateClearanceThird)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setPunchOrDie(SpecialPiercingInsertBuilder.PunchOrDieTypes punchOrDie)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setRenameComponent(boolean renameComponent)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setSelectVector(Direction selectVector)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setStandardOrUserDefined(SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes standardOrUserDefined)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setType(SpecialPiercingInsertBuilder.Types type)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setUsePlateClearanceFirst(boolean usePlateClearanceFirst)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setUsePlateClearanceFourth(boolean usePlateClearanceFourth)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setUsePlateClearanceSecond(boolean usePlateClearanceSecond)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setUsePlateClearanceThird(boolean usePlateClearanceThird)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setWCSForSpecialPiercingInsert(boolean needPrecisionValue)
Set work coordinate system for special piercing insert
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
setWizardType(int wizardType)
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
Expression |
slugHoleHeightLinearDimension()
Returns the slug hole height linear dimension
License requirements: None. |
SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes |
standardOrUserDefined()
Returns the standard or user defined
License requirements: None. |
Expression |
startLimit()
Returns the start limit
License requirements: None. |
void |
suppressAllFeatureAfter(NXObject featureTag,
boolean suppressChildren)
Suppress child feature.
|
SpecialPiercingInsertBuilder.Types |
type()
Returns the type
License requirements: None. |
boolean |
usePlateClearanceFirst()
Returns the use plate clearance first
License requirements: None. |
boolean |
usePlateClearanceFourth()
Returns the use plate clearance fourth
License requirements: None. |
boolean |
usePlateClearanceSecond()
Returns the use plate clearance second
License requirements: None. |
boolean |
usePlateClearanceThird()
Returns the use plate clearance third
License requirements: None. |
void |
waveFacesAndFillHole(Part rootPart,
NXObject instanceTag)
Wave faces and fill hole
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
waveFacesOfSelectedCurves(Part rootPart,
NXObject instanceTag)
Wave faces of selected curves
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
void |
waveIntersectBodyToNewDieInsertPart(NXObject[] bodies)
Wave intersect body to new die insert part.
|
void |
waveSelectedCurves()
Wave selected curves
License requirements: prog_die_wizard ("UG/Progressive Die Wizard") . |
int |
wizardType()
Returns the wizard type
License requirements: None. |
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
SelectFaceList selectFace() throws NXException, RemoteException
NXException
RemoteException
Expression offsetValueLinearDimensionPositiveX() throws NXException, RemoteException
NXException
RemoteException
Expression offsetValueLinearDimensionNegativeX() throws NXException, RemoteException
NXException
RemoteException
Expression offsetValueLinearDimensionPositiveY() throws NXException, RemoteException
NXException
RemoteException
Expression offsetValueLinearDimensionNegativeY() throws NXException, RemoteException
NXException
RemoteException
Expression offsetValueLinearDimensionPositiveZ() throws NXException, RemoteException
NXException
RemoteException
Expression offsetValueLinearDimensionNegativeZ() throws NXException, RemoteException
NXException
RemoteException
Expression radialOffset() throws NXException, RemoteException
NXException
RemoteException
SelectEdgeList selectEdges() throws NXException, RemoteException
NXException
RemoteException
Direction selectVector() throws NXException, RemoteException
NXException
RemoteException
void setSelectVector(Direction selectVector) throws NXException, RemoteException
selectVector
- NXException
RemoteException
SpecialPiercingInsertBuilder.ParentPartTypes parentPart() throws NXException, RemoteException
NXException
RemoteException
void setParentPart(SpecialPiercingInsertBuilder.ParentPartTypes parentPart) throws NXException, RemoteException
parentPart
- NXException
RemoteException
SpecialPiercingInsertBuilder.PunchOrDieTypes punchOrDie() throws NXException, RemoteException
NXException
RemoteException
void setPunchOrDie(SpecialPiercingInsertBuilder.PunchOrDieTypes punchOrDie) throws NXException, RemoteException
punchOrDie
- NXException
RemoteException
SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes standardOrUserDefined() throws NXException, RemoteException
NXException
RemoteException
void setStandardOrUserDefined(SpecialPiercingInsertBuilder.StandardOrUserDefinedTypes standardOrUserDefined) throws NXException, RemoteException
standardOrUserDefined
- NXException
RemoteException
SpecialPiercingInsertBuilder.BoundBoxType boundBox() throws NXException, RemoteException
NXException
RemoteException
void setBoundBox(SpecialPiercingInsertBuilder.BoundBoxType boundBoxType) throws NXException, RemoteException
boundBoxType
- NXException
RemoteException
void createDatumPlane() throws NXException, RemoteException
NXException
RemoteException
Section selectCurves() throws NXException, RemoteException
NXException
RemoteException
SelectNXObjectList selectInsert() throws NXException, RemoteException
NXException
RemoteException
Expression startLimit() throws NXException, RemoteException
NXException
RemoteException
Expression endLimit() throws NXException, RemoteException
NXException
RemoteException
boolean usePlateClearanceFirst() throws NXException, RemoteException
NXException
RemoteException
void setUsePlateClearanceFirst(boolean usePlateClearanceFirst) throws NXException, RemoteException
usePlateClearanceFirst
- NXException
RemoteException
double plateClearanceFirst() throws NXException, RemoteException
NXException
RemoteException
void setPlateClearanceFirst(double plateClearanceFirst) throws NXException, RemoteException
plateClearanceFirst
- NXException
RemoteException
boolean usePlateClearanceSecond() throws NXException, RemoteException
NXException
RemoteException
void setUsePlateClearanceSecond(boolean usePlateClearanceSecond) throws NXException, RemoteException
usePlateClearanceSecond
- NXException
RemoteException
double plateClearanceSecond() throws NXException, RemoteException
NXException
RemoteException
void setPlateClearanceSecond(double plateClearanceSecond) throws NXException, RemoteException
plateClearanceSecond
- NXException
RemoteException
boolean usePlateClearanceThird() throws NXException, RemoteException
NXException
RemoteException
void setUsePlateClearanceThird(boolean usePlateClearanceThird) throws NXException, RemoteException
usePlateClearanceThird
- NXException
RemoteException
double plateClearanceThird() throws NXException, RemoteException
NXException
RemoteException
void setPlateClearanceThird(double plateClearanceThird) throws NXException, RemoteException
plateClearanceThird
- NXException
RemoteException
boolean usePlateClearanceFourth() throws NXException, RemoteException
NXException
RemoteException
void setUsePlateClearanceFourth(boolean usePlateClearanceFourth) throws NXException, RemoteException
usePlateClearanceFourth
- NXException
RemoteException
double plateClearanceFourth() throws NXException, RemoteException
NXException
RemoteException
void setPlateClearanceFourth(double plateClearanceFourth) throws NXException, RemoteException
plateClearanceFourth
- NXException
RemoteException
SpecialPiercingInsertBuilder.NormalCavityType normalCavity() throws NXException, RemoteException
NXException
RemoteException
void setNormalCavity(SpecialPiercingInsertBuilder.NormalCavityType normalCavity) throws NXException, RemoteException
normalCavity
- Indicates the cavity type for normal pierce designNXException
RemoteException
double normalSlugPara1() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugPara1(double normalSlugPara1) throws NXException, RemoteException
normalSlugPara1
- Indicates the H value of slug hole for normal pierce designNXException
RemoteException
double normalSlugPara2() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugPara2(double normalSlugPara2) throws NXException, RemoteException
normalSlugPara2
- Indicates A value of slug hole for normal pierce designNXException
RemoteException
double normalSlugPara3() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugPara3(double normalSlugPara3) throws NXException, RemoteException
normalSlugPara3
- Indicates C1 value of slug hole for normal pierce designNXException
RemoteException
double normalSlugPara4() throws NXException, RemoteException
NXException
RemoteException
void setNormalSlugPara4(double normalSlugPara4) throws NXException, RemoteException
normalSlugPara4
- Indicates the C2 value of slug hole for normal pierce designNXException
RemoteException
Expression slugHoleHeightLinearDimension() throws NXException, RemoteException
NXException
RemoteException
Expression offsetLinearDimension() throws NXException, RemoteException
NXException
RemoteException
SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType normalBbpslug() throws NXException, RemoteException
NXException
RemoteException
void setNormalBbpslug(SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType normalBbpslug) throws NXException, RemoteException
normalBbpslug
- Indicates bottom plate slug type for normal pierce designNXException
RemoteException
SpecialPiercingInsertBuilder.NormalDieShoeSlugType normalDsslug() throws NXException, RemoteException
NXException
RemoteException
void setNormalDsslug(SpecialPiercingInsertBuilder.NormalDieShoeSlugType normalDsslug) throws NXException, RemoteException
normalDsslug
- Indicates die shoe slug type for normal pierce designNXException
RemoteException
double normalClearance() throws NXException, RemoteException
NXException
RemoteException
void setNormalClearance(double normalClearance) throws NXException, RemoteException
normalClearance
- Indicates the clearance value for normal pierce designNXException
RemoteException
SpecialPiercingInsertBuilder.NormalOffsetSideType normalOffsetSide() throws NXException, RemoteException
NXException
RemoteException
void setNormalOffsetSide(SpecialPiercingInsertBuilder.NormalOffsetSideType normalOffsetSide) throws NXException, RemoteException
normalOffsetSide
- Indicates the offset side option for normal pierce designNXException
RemoteException
boolean renameComponent() throws NXException, RemoteException
NXException
RemoteException
void setRenameComponent(boolean renameComponent) throws NXException, RemoteException
renameComponent
- NXException
RemoteException
SpecialPiercingInsertBuilder.Types type() throws NXException, RemoteException
NXException
RemoteException
void setType(SpecialPiercingInsertBuilder.Types type) throws NXException, RemoteException
type
- NXException
RemoteException
int wizardType() throws NXException, RemoteException
NXException
RemoteException
void setWizardType(int wizardType) throws NXException, RemoteException
wizardType
- NXException
RemoteException
void setWCSForSpecialPiercingInsert(boolean needPrecisionValue) throws NXException, RemoteException
needPrecisionValue
- NXException
RemoteException
void waveFacesOfSelectedCurves(Part rootPart, NXObject instanceTag) throws NXException, RemoteException
rootPart
- instanceTag
- NXException
RemoteException
void waveSelectedCurves() throws NXException, RemoteException
NXException
RemoteException
Curve[] getWaveLinkedCurves() throws NXException, RemoteException
NXException
RemoteException
void createOffsetDatumPlane() throws NXException, RemoteException
NXException
RemoteException
Curve[] getProfile(Section sectionTag) throws NXException, RemoteException
sectionTag
- NXException
RemoteException
Edge getCorrectEdgeInNewPart(Part partTag, Edge sourceEdge) throws NXException, RemoteException
partTag
- sourceEdge
- NXException
RemoteException
void waveFacesAndFillHole(Part rootPart, NXObject instanceTag) throws NXException, RemoteException
rootPart
- instanceTag
- NXException
RemoteException
boolean is3DCurves() throws NXException, RemoteException
NXException
RemoteException
void setIs3DCurves(boolean is3DCurves) throws NXException, RemoteException
is3DCurves
- NXException
RemoteException
Face[] getCorrectFacesOfExtractRegionFeature() throws NXException, RemoteException
NXException
RemoteException
String parentPartName() throws NXException, RemoteException
NXException
RemoteException
void setParentPartName(String parentPart) throws NXException, RemoteException
parentPart
- Specifies the parent part nameNXException
RemoteException
SpecialPiercingInsertBuilder.InsertPositionTypes insertPosition() throws NXException, RemoteException
NXException
RemoteException
void setInsertPosition(SpecialPiercingInsertBuilder.InsertPositionTypes insertPosition) throws NXException, RemoteException
insertPosition
- NXException
RemoteException
Point3d boxPosition() throws NXException, RemoteException
NXException
RemoteException
void setBoxPosition(Point3d csysOrigin) throws NXException, RemoteException
csysOrigin
- NXException
RemoteException
void setBoxMatrixAndPosition(Matrix3x3 matrix, Point3d position) throws NXException, RemoteException
matrix
- position
- NXException
RemoteException
void calculateBoxSize() throws NXException, RemoteException
NXException
RemoteException
NXObject addInsertPartIntoAssembly(NXObject parentPart, String templatePartName, Point3d origin) throws NXException, RemoteException
parentPart
- templatePartName
- origin
- NXException
RemoteException
NXObject getHoleBoundaryFaceAndCreatePatchOpenings(NXObject[] edges) throws NXException, RemoteException
edges
- NXException
RemoteException
NXObject createKFBoundBox(Matrix3x3 wcsMatrix, double[] clearance, NXObject[] faces) throws NXException, RemoteException
wcsMatrix
- clearance
- faces
- NXException
RemoteException
void createIntersect(NXObject targetBody, NXObject bodyOfKFBoundBox) throws NXException, RemoteException
targetBody
- bodyOfKFBoundBox
- NXException
RemoteException
void waveIntersectBodyToNewDieInsertPart(NXObject[] bodies) throws NXException, RemoteException
bodies
- NXException
RemoteException
void deleteSelectedInsertAndWaveLinkedSource() throws NXException, RemoteException
NXException
RemoteException
void suppressAllFeatureAfter(NXObject featureTag, boolean suppressChildren) throws NXException, RemoteException
featureTag
- suppressChildren
- NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.