public interface WeldJointBuilder extends StructureWeldBuilder
WeldJoint
feature. WeldManager.createJointBuilder(nxopen.weld.WeldJoint)
Property | Value |
---|---|
NumberSegments | 2 |
SplitAngle | 5.0 |
Modifier and Type | Interface and Description |
---|---|
static class |
WeldJointBuilder.Application
Application where joints are created.
|
static class |
WeldJointBuilder.CoordinateSystem
Coordinate system specification.
|
static class |
WeldJointBuilder.DestinationTypes
Where to create new joints.
|
static class |
WeldJointBuilder.JointMidPointData
Joint evaluation information at the mid point.
|
static class |
WeldJointBuilder.MidPointInformationData
This class holds the data returned from
getMidPointInformation(nxopen.weld.WeldJointBuilder.CoordinateSystem) |
static class |
WeldJointBuilder.NewlyCreatedJointsData
This class holds the data returned from
getNewlyCreatedJoints() |
static class |
WeldJointBuilder.SplitTypes
Joint splitting options.
|
static class |
WeldJointBuilder.Types
Creation method.
|
static class |
WeldJointBuilder.WeldTypes
Weld types.
|
Modifier and Type | Method and Description |
---|---|
void |
addCharacteristicsInheritaceInformation()
Add welding characteristics inheritance information.
|
boolean |
associativeSplit()
Returns whether split joints should be associative
License requirements: None. |
ScCollector |
backingFace()
Returns the backing face.
|
LineColorFontWidthBuilder |
bossColorFontWidth()
Returns the color, font, and width of the boss joint curves.
|
int |
buttColor()
Returns the color for butt weld type joints
License requirements: None. |
LineColorFontWidthBuilder |
buttColorFontWidth()
Returns the color, font, and width of the butt joint curves.
|
DisplayableObject.ObjectFont |
buttFont()
Returns the curve font for butt weld type joints
License requirements: None. |
DisplayableObject.ObjectWidth |
buttWidth()
Returns the curve with for butt weld type joints
License requirements: None. |
boolean |
combineConnectedJoints()
Returns the indication to combine connected joints if they belong to the same body
License requirements: None. |
void |
copyLimits(DieLimitsBuilder limits)
Copy input limits to builder limits
License requirements: None. |
LineColorFontWidthBuilder |
cornerColorFontWidth()
Returns the color, font, and width of the corner joint curves.
|
WeldJointBuilder.Application |
createdApplication()
Returns the application where joint is created
License requirements: None. |
Curve |
createLimitsPath(Curve jointCurve)
Creates the path to be used for the limits.
|
WeldJointBuilder.Types |
createMethod()
Returns the creation method
License requirements: None. |
void |
createSingleJointFromFeature(Curve featureCurve,
boolean updateBuilder)
Creates a joint from a feature.
|
void |
delete()
Deletes all joints set by
joint() . |
void |
deleteAllUnMarkedJoints()
Deletes any joints that were not marked with a call to
markJointsToKeep() . |
void |
deleteCharacteristicsInheritaceInformation()
Delete welding characteristics inheritance information.
|
WeldJointBuilder.DestinationTypes |
destination()
Returns the destination to create new joints
License requirements: None. |
boolean |
duplicateCheck()
Returns the indication to not allow new joints to be created if they are duplicates of exising joints
License requirements: None. |
int |
filletColor()
Returns the color for T-joint weld type joints
License requirements: None. |
DisplayableObject.ObjectFont |
filletFont()
Returns the curve font for T-joint weld type joints
License requirements: None. |
DisplayableObject.ObjectWidth |
filletWidth()
Returns the curve with for T-joint weld type joints
License requirements: None. |
Port[] |
findPortsInParts(Part[] parts)
Gets ports from the parts.
|
double |
getAngleBetween()
Gets the angle between the fillet weld mold faces, and the target faces, or butt weld primary and secondary faces.
|
Component[] |
getConnectedParts()
Gets connected parts for joint.
|
boolean |
getIsLongPoint()
Gets the long point status.
|
boolean |
getJointChanged(Curve curve)
Indicates whether joint was changed.
|
DieLimitsBuilder |
getJointLimits(Curve curve)
Get the limits of an individual joint.
|
WeldJointBuilder.MidPointInformationData |
getMidPointInformation(WeldJointBuilder.CoordinateSystem desiredCoordinateSystem)
Gets the joint curve mid point, tangent, and face normals at the mid point from the primary and secondary bodies.
|
WeldJointBuilder.NewlyCreatedJointsData |
getNewlyCreatedJoints()
Gets the
JointItemBuilder objects and curves which were just created by showJoints() . |
double |
getPrimaryThickness(Curve curve)
Gets the primary thickness for a specified joint
License requirements: None. |
double |
getSecondaryThickness(Curve curve)
Gets the primary secondary for a specified joint
License requirements: None. |
JointItemBuilder |
getSingleJoint(Curve curve)
Gets the
JointItemBuilder object associated to the input curve. |
double[] |
getVariableBevelAngles()
Gets variable bevel angles.
|
boolean |
isCornerOpen()
Returns status value of true if corner joint is an open case which means the placement face only touches the target face at the master edge.
|
boolean |
isPipeJoint()
Returns status value of true if this is a pipe welding joint.
|
SelectCurveList |
joint()
Returns the welding joint curves.
|
JointItemBuilderList |
jointList()
Returns the list of
JointItemBuilder objects. |
String |
jointPrefix()
Returns the prefix for the weld ID attribute, and the prefix for the name of the component if
WeldJointBuilder.DestinationTypes is WeldJointBuilder.DestinationTypes.NEW_COMPONENT
License requirements: None. |
LineColorFontWidthBuilder |
lapColorFontWidth()
Returns the color, font, and width of the lap joint curves.
|
DieLimitsBuilderList |
limitList()
Returns the list of limit builders.
|
DieLimitsBuilder |
limits()
Returns the limits of the joint curve span.
|
void |
markJointsToKeep()
Marks all currently created welding joints so they do not get deleted when
deleteAllUnMarkedJoints() is called from the dialog. |
ScCollector |
masterEdge()
Returns the master edge of a fillet weld.
|
double |
maximumFaceGap()
Returns the maximum face gap used when determining if two bodies intersect.
|
LineColorFontWidthBuilder |
mechanicalColorFontWidth()
Returns the color, font, and width of the mechanical joint curves.
|
String |
namePrefix()
Returns the prefix used for the welding joint Design Feature name in Collaborative Product Development mode
License requirements: None. |
JointItemBuilder |
newItem()
Creates a
JointItemBuilder object. |
int |
numberSegments()
Returns the number of segments to divide a joint when using
WeldJointBuilder.SplitTypes.EQUAL_SEGMENTS . |
ScCollector |
placementFace()
Returns the placement face of a fillet weld.
|
ScCollector |
primaryEdge()
Returns the primary edge of a butt weld.
|
ScCollector |
primaryFace()
Returns the primary face of a butt weld.
|
ScCollector |
secondaryEdge()
Returns the secondary edge of a butt weld.
|
ScCollector |
secondaryFace()
Returns the secondary face of a butt weld.
|
void |
setAssociativeSplit(boolean status)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setButtColor(int color)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setButtFont(DisplayableObject.ObjectFont font)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setButtWidth(DisplayableObject.ObjectWidth width)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setCallbackMessage(String message)
Sets a message to display after callback processing ends
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setCombineConnectedJoints(boolean status)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setCreatedApplication(WeldJointBuilder.Application application)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setCreateMethod(WeldJointBuilder.Types type)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setDestination(WeldJointBuilder.DestinationTypes type)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setDuplicateCheck(boolean status)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setErrorMessage(String message)
Sets an error message to display
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setFilletColor(int color)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setFilletFont(DisplayableObject.ObjectFont font)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setFilletWidth(DisplayableObject.ObjectWidth width)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setJointChanged(Curve curve,
boolean changed)
Indicate that joint was changed.
|
void |
setJointPrefix(String prefix)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setMaximumFaceGap(double gapValue)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setNamePrefix(String prefix)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setNumberSegments(int numberSegments)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setSpacingLength(double length)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setSplitAngle(double angle)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setSplitLength(double length)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setSplitOption(WeldJointBuilder.SplitTypes option)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setSubsetPart(Part part)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setType(WeldJointBuilder.Types type)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setVariableBevelAngles(double[] variableAngles)
This method is for use with the variable bevel callback.
|
void |
setWeldType(WeldJointBuilder.WeldTypes type)
License requirements: structure_weld ("STRUCTURE WELD") . |
void |
setWorkPart(Part part)
License requirements: structure_weld ("STRUCTURE WELD") . |
SelectNXObjectList |
shipComponent()
Returns the components on which the welding joints will be created.
|
void |
showJoints()
Show joints will create joints using the method set by
WeldJointBuilder.Types . |
LineColorFontWidthBuilder |
sleeveColorFontWidth()
Returns the color, font, and width of the sleeve joint curves.
|
LineColorFontWidthBuilder |
socketColorFontWidth()
Returns the color, font, and width of the socket joint curves.
|
double |
spacingLength()
Returns the spacing length when using
WeldJointBuilder.SplitTypes.SKIP . |
void |
split()
Splits all joints set by
joint() defined by WeldJointBuilder.SplitTypes . |
double |
splitAngle()
Returns the split angle to divide a joint when using
WeldJointBuilder.SplitTypes.ANGLE . |
double |
splitLength()
Returns the segment length when using
WeldJointBuilder.SplitTypes.SKIP . |
WeldJointBuilder.SplitTypes |
splitOption()
Returns the method used to split the joint
License requirements: None. |
Part |
subsetPart()
Returns the subset part where Design Control Elements are to be created
License requirements: None. |
ScCollector |
targetFace()
Returns the target face of a fillet weld.
|
LineColorFontWidthBuilder |
tjointColorFontWidth()
Returns the color, font, and width of the T-joint curves.
|
WeldJointBuilder.Types |
type()
Returns the creation type
License requirements: None. |
void |
updateCollectors(Curve jointCurve)
Updates the main collectors by copying data from Joint.
|
void |
updateJointAfterLimitsChange()
Updates the joint curve after the limits change.
|
void |
updateJointAfterLimitsChange(DieLimitsBuilder limits)
Updates the joint curve after the limits change.
|
void |
updateJointType(WeldJointBuilder.WeldTypes type)
Updates all joints set by
joint() to have the given type. |
CharacteristicsBuilder |
weldingCharacteristics()
Returns the collection of welding characteristics defined by attributes.
|
WeldJointBuilder.WeldTypes |
weldType()
Returns the weld type
License requirements: None. |
Part |
workPart()
Returns the saved work part
License requirements: None. |
getCommittedComponents
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
SelectNXObjectList shipComponent() throws NXException, RemoteException
WeldJointBuilder.Types
.
is set to WeldJointBuilder.Types.CREATE_AUTOMATIC
or
WeldJointBuilder.Types.CREATE_ATTRIBUTES
After setting the components, showJoints()
should be called to create the welding joints.
NXException
RemoteException
CharacteristicsBuilder weldingCharacteristics() throws NXException, RemoteException
NXException
RemoteException
SelectCurveList joint() throws NXException, RemoteException
NXException
RemoteException
ScCollector masterEdge() throws NXException, RemoteException
WeldJoint
feature.
When editing a feature the JointItemBuilder.masterEdge()
of the JointItemBuilder
should be used
to access the data.
NXException
RemoteException
ScCollector placementFace() throws NXException, RemoteException
WeldJoint
feature.
When editing a feature the JointItemBuilder.placementFace()
of the JointItemBuilder
should be used
to access the data.
NXException
RemoteException
ScCollector targetFace() throws NXException, RemoteException
WeldJoint
feature.
When editing a feature the JointItemBuilder.targetFace()
of the JointItemBuilder
should be used
to access the data.
NXException
RemoteException
ScCollector primaryFace() throws NXException, RemoteException
WeldJoint
feature.
When editing a feature the JointItemBuilder.primaryFace()
of the JointItemBuilder
should be used
to access the data.
NXException
RemoteException
ScCollector secondaryFace() throws NXException, RemoteException
WeldJoint
feature.
When editing a feature the JointItemBuilder.secondaryFace()
of the JointItemBuilder
should be used
to access the data.
NXException
RemoteException
ScCollector backingFace() throws NXException, RemoteException
WeldJoint
feature.
When editing a feature the JointItemBuilder.backingFace()
of the JointItemBuilder
should be used
to access the data.
NXException
RemoteException
ScCollector primaryEdge() throws NXException, RemoteException
WeldJoint
feature.
When editing a feature the JointItemBuilder.primaryEdge()
of the JointItemBuilder
should be used
to access the data.
NXException
RemoteException
ScCollector secondaryEdge() throws NXException, RemoteException
WeldJoint
feature.
When editing a feature the JointItemBuilder.secondaryEdge()
of the JointItemBuilder
should be used
to access the data.
NXException
RemoteException
String namePrefix() throws NXException, RemoteException
NXException
RemoteException
void setNamePrefix(String prefix) throws NXException, RemoteException
prefix
- NXException
RemoteException
String jointPrefix() throws NXException, RemoteException
WeldJointBuilder.DestinationTypes
is WeldJointBuilder.DestinationTypes.NEW_COMPONENT
NXException
RemoteException
void setJointPrefix(String prefix) throws NXException, RemoteException
prefix
- NXException
RemoteException
Part subsetPart() throws NXException, RemoteException
NXException
RemoteException
void setSubsetPart(Part part) throws NXException, RemoteException
part
- NXException
RemoteException
void delete() throws NXException, RemoteException
joint()
.
NXException
RemoteException
Part workPart() throws NXException, RemoteException
NXException
RemoteException
void setWorkPart(Part part) throws NXException, RemoteException
part
- NXException
RemoteException
DieLimitsBuilderList limitList() throws NXException, RemoteException
NXException
RemoteException
JointItemBuilderList jointList() throws NXException, RemoteException
JointItemBuilder
objects.
When editing a WeldJoint
the joint()
should be used
to access the output curves of the feature. getSingleJoint(nxopen.Curve)
is then used to access the
JointItemBuilder
from the curve.
NXException
RemoteException
void split() throws NXException, RemoteException
joint()
defined by WeldJointBuilder.SplitTypes
.
NXException
RemoteException
void updateJointType(WeldJointBuilder.WeldTypes type) throws NXException, RemoteException
joint()
to have the given type.
type
- NXException
RemoteException
void deleteAllUnMarkedJoints() throws NXException, RemoteException
markJointsToKeep()
.
NXException
RemoteException
void addCharacteristicsInheritaceInformation() throws NXException, RemoteException
NXException
RemoteException
void deleteCharacteristicsInheritaceInformation() throws NXException, RemoteException
NXException
RemoteException
void markJointsToKeep() throws NXException, RemoteException
deleteAllUnMarkedJoints()
is called from the dialog.
NXException
RemoteException
int numberSegments() throws NXException, RemoteException
WeldJointBuilder.SplitTypes.EQUAL_SEGMENTS
.
NXException
RemoteException
void setNumberSegments(int numberSegments) throws NXException, RemoteException
numberSegments
- NXException
RemoteException
double splitAngle() throws NXException, RemoteException
WeldJointBuilder.SplitTypes.ANGLE
.
NXException
RemoteException
void setSplitAngle(double angle) throws NXException, RemoteException
angle
- NXException
RemoteException
double splitLength() throws NXException, RemoteException
WeldJointBuilder.SplitTypes.SKIP
.
NXException
RemoteException
void setSplitLength(double length) throws NXException, RemoteException
length
- NXException
RemoteException
double spacingLength() throws NXException, RemoteException
WeldJointBuilder.SplitTypes.SKIP
.
NXException
RemoteException
void setSpacingLength(double length) throws NXException, RemoteException
length
- NXException
RemoteException
double maximumFaceGap() throws NXException, RemoteException
NXException
RemoteException
void setMaximumFaceGap(double gapValue) throws NXException, RemoteException
gapValue
- NXException
RemoteException
void showJoints() throws NXException, RemoteException
WeldJointBuilder.Types
.
For WeldJointBuilder.Types.CREATE_AUTOMATIC
and WeldJointBuilder.Types.CREATE_ATTRIBUTES
components need to be set using shipComponent()
. For WeldJointBuilder.Types.CREATE_MANUAL
,
the following need to be set:
When WeldJointBuilder.WeldTypes
is WeldJointBuilder.WeldTypes.FILLET
, the following
methods need to be called to set the input data: masterEdge()
, placementFace()
,
targetFace()
.
When WeldJointBuilder.WeldTypes
is WeldJointBuilder.WeldTypes.GROOVE
, the following
methods need to be called to set the input data: primaryFace()
, primaryEdge()
,
secondaryFace()
, secondaryEdge()
.
NXException
RemoteException
WeldJointBuilder.SplitTypes splitOption() throws NXException, RemoteException
NXException
RemoteException
void setSplitOption(WeldJointBuilder.SplitTypes option) throws NXException, RemoteException
option
- NXException
RemoteException
WeldJointBuilder.WeldTypes weldType() throws NXException, RemoteException
NXException
RemoteException
void setWeldType(WeldJointBuilder.WeldTypes type) throws NXException, RemoteException
type
- NXException
RemoteException
WeldJointBuilder.Application createdApplication() throws NXException, RemoteException
NXException
RemoteException
void setCreatedApplication(WeldJointBuilder.Application application) throws NXException, RemoteException
application
- NXException
RemoteException
WeldJointBuilder.DestinationTypes destination() throws NXException, RemoteException
NXException
RemoteException
void setDestination(WeldJointBuilder.DestinationTypes type) throws NXException, RemoteException
type
- NXException
RemoteException
int buttColor() throws NXException, RemoteException
NXException
RemoteException
void setButtColor(int color) throws NXException, RemoteException
color
- NXException
RemoteException
int filletColor() throws NXException, RemoteException
NXException
RemoteException
void setFilletColor(int color) throws NXException, RemoteException
color
- NXException
RemoteException
DisplayableObject.ObjectFont filletFont() throws NXException, RemoteException
NXException
RemoteException
void setFilletFont(DisplayableObject.ObjectFont font) throws NXException, RemoteException
font
- NXException
RemoteException
DisplayableObject.ObjectFont buttFont() throws NXException, RemoteException
NXException
RemoteException
void setButtFont(DisplayableObject.ObjectFont font) throws NXException, RemoteException
font
- NXException
RemoteException
DisplayableObject.ObjectWidth buttWidth() throws NXException, RemoteException
NXException
RemoteException
void setButtWidth(DisplayableObject.ObjectWidth width) throws NXException, RemoteException
width
- NXException
RemoteException
DisplayableObject.ObjectWidth filletWidth() throws NXException, RemoteException
NXException
RemoteException
void setFilletWidth(DisplayableObject.ObjectWidth width) throws NXException, RemoteException
width
- NXException
RemoteException
WeldJointBuilder.Types type() throws NXException, RemoteException
NXException
RemoteException
void setType(WeldJointBuilder.Types type) throws NXException, RemoteException
type
- NXException
RemoteException
WeldJointBuilder.Types createMethod() throws NXException, RemoteException
NXException
RemoteException
void setCreateMethod(WeldJointBuilder.Types type) throws NXException, RemoteException
type
- NXException
RemoteException
boolean duplicateCheck() throws NXException, RemoteException
NXException
RemoteException
void setDuplicateCheck(boolean status) throws NXException, RemoteException
status
- NXException
RemoteException
boolean associativeSplit() throws NXException, RemoteException
NXException
RemoteException
void setAssociativeSplit(boolean status) throws NXException, RemoteException
status
- NXException
RemoteException
boolean combineConnectedJoints() throws NXException, RemoteException
NXException
RemoteException
void setCombineConnectedJoints(boolean status) throws NXException, RemoteException
status
- NXException
RemoteException
DieLimitsBuilder limits() throws NXException, RemoteException
NXException
RemoteException
DieLimitsBuilder getJointLimits(Curve curve) throws NXException, RemoteException
curve
- NXException
RemoteException
JointItemBuilder getSingleJoint(Curve curve) throws NXException, RemoteException
JointItemBuilder
object associated to the input curve.
curve
- Joint curveNXException
RemoteException
boolean getJointChanged(Curve curve) throws NXException, RemoteException
curve
- Joint curve to checkNXException
RemoteException
void setJointChanged(Curve curve, boolean changed) throws NXException, RemoteException
curve
- Joint curve to checkchanged
- NXException
RemoteException
Curve createLimitsPath(Curve jointCurve) throws NXException, RemoteException
jointCurve
- Joint curve used to create path.NXException
RemoteException
void updateCollectors(Curve jointCurve) throws NXException, RemoteException
jointCurve
- Joint curve to use to update collectorsNXException
RemoteException
void updateJointAfterLimitsChange() throws NXException, RemoteException
NXException
RemoteException
void updateJointAfterLimitsChange(DieLimitsBuilder limits) throws NXException, RemoteException
limits
- limits that changedNXException
RemoteException
void copyLimits(DieLimitsBuilder limits) throws NXException, RemoteException
limits
- limits to copyNXException
RemoteException
void createSingleJointFromFeature(Curve featureCurve, boolean updateBuilder) throws NXException, RemoteException
featureCurve
- Weld Joint feature curveupdateBuilder
- indicates where builder should be updated with information from the featureNXException
RemoteException
void setVariableBevelAngles(double[] variableAngles) throws NXException, RemoteException
variableAngles
- the variable angles.NXException
RemoteException
double[] getVariableBevelAngles() throws NXException, RemoteException
NXException
RemoteException
Component[] getConnectedParts() throws NXException, RemoteException
NXException
RemoteException
Port[] findPortsInParts(Part[] parts) throws NXException, RemoteException
parts
- the parts used to find the ports.NXException
RemoteException
double getPrimaryThickness(Curve curve) throws NXException, RemoteException
curve
- NXException
RemoteException
double getSecondaryThickness(Curve curve) throws NXException, RemoteException
curve
- NXException
RemoteException
double getAngleBetween() throws NXException, RemoteException
NXException
RemoteException
boolean getIsLongPoint() throws NXException, RemoteException
NXException
RemoteException
boolean isCornerOpen() throws NXException, RemoteException
NXException
RemoteException
boolean isPipeJoint() throws NXException, RemoteException
NXException
RemoteException
JointItemBuilder newItem() throws NXException, RemoteException
JointItemBuilder
object.
NXException
RemoteException
WeldJointBuilder.NewlyCreatedJointsData getNewlyCreatedJoints() throws NXException, RemoteException
JointItemBuilder
objects and curves which were just created by showJoints()
.
NXException
RemoteException
void setCallbackMessage(String message) throws NXException, RemoteException
message
- Message to display to userNXException
RemoteException
void setErrorMessage(String message) throws NXException, RemoteException
message
- Message to display to userNXException
RemoteException
WeldJointBuilder.MidPointInformationData getMidPointInformation(WeldJointBuilder.CoordinateSystem desiredCoordinateSystem) throws NXException, RemoteException
desiredCoordinateSystem
- Coordinate system of data returned in jointMidPointDataNXException
RemoteException
LineColorFontWidthBuilder buttColorFontWidth() throws NXException, RemoteException
NXException
RemoteException
LineColorFontWidthBuilder tjointColorFontWidth() throws NXException, RemoteException
NXException
RemoteException
LineColorFontWidthBuilder lapColorFontWidth() throws NXException, RemoteException
NXException
RemoteException
LineColorFontWidthBuilder socketColorFontWidth() throws NXException, RemoteException
NXException
RemoteException
LineColorFontWidthBuilder mechanicalColorFontWidth() throws NXException, RemoteException
NXException
RemoteException
LineColorFontWidthBuilder cornerColorFontWidth() throws NXException, RemoteException
NXException
RemoteException
LineColorFontWidthBuilder sleeveColorFontWidth() throws NXException, RemoteException
NXException
RemoteException
LineColorFontWidthBuilder bossColorFontWidth() throws NXException, RemoteException
NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.