- M - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepLengthUnitType
-
Length unit of meter
- M - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
M-Style
- M - Static variable in class nxopen.HumanData.StatureUnitType
-
Indicate m for stature
- MAC - Static variable in class nxopen.cae.CorrelModePairingBuilder.Auto
-
by mac metric
- MAC - Static variable in class nxopen.cae.CorrelShapemetrictype
-
Shape metric type is Modal Assurance Criteria
- MAC - Static variable in class nxopen.cae.ModelUpdateCorrelMethodBuilder.Method
-
Correlation Method is MAC
- MAC - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Apple Macintosh character set
- MAC_PHERSON_STRUT - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.SuspensionTemplateType
-
Use the MacPherson Strut suspension template.
- MACH_CNTRL_OPER_SET - Static variable in class nxopen.uf.UFUde.SetType
-
- MACH_MODE_DRILL - Static variable in class nxopen.uf.UFOper.MachMode
-
- MACH_MODE_LAST - Static variable in class nxopen.uf.UFOper.MachMode
-
- MACH_MODE_LATHE - Static variable in class nxopen.uf.UFOper.MachMode
-
- MACH_MODE_MILL - Static variable in class nxopen.uf.UFOper.MachMode
-
- MACH_MODE_TURN - Static variable in class nxopen.uf.UFOper.MachMode
-
- MACH_MODE_UNDEF - Static variable in class nxopen.uf.UFOper.MachMode
-
- MACH_MODE_WEDM - Static variable in class nxopen.uf.UFOper.MachMode
-
- MACH_NUMBER - Static variable in class nxopen.cae.Result.Quantity
-
- machine - Variable in class nxopen.BasePart.HistoryEventInformation
-
type of machine. eg.
- MACHINE - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Machine Base classification
- machine - Variable in class nxopen.uf.UFPart.AskNthHistoryData
-
- MACHINE_CODE_SIMULATE_CSE - Static variable in class nxopen.sim.IsvControlPanelBuilder.VisualizationType
-
Machine Code Simulate Cse
- MACHINE_CODE_SIMULATE_MTD - Static variable in class nxopen.sim.IsvControlPanelBuilder.VisualizationType
-
Machine Code Simulate Mtd
- MACHINE_CYCLE - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.OutputOptionTypes
-
Output Option: Machine Cycle
- MACHINE_CYCLE - Static variable in class nxopen.cam.Cycle.MotionOutputTypes
-
Machine Cycle
- MACHINE_CYCLE - Static variable in class nxopen.cam.TurningOperationBuilder.MotionOutputOptions
-
Machine cycle motions output
- MACHINE_LASER - Static variable in class nxopen.uf.UFPath.MachineMode
-
- MACHINE_METHOD - Static variable in class nxopen.cam.CAMSetup.View
-
machine method
- MACHINE_MILL - Static variable in class nxopen.uf.UFPath.MachineMode
-
- MACHINE_MODE - Static variable in class nxopen.uf.UFUiOnt.TreeMode
-
- MACHINE_MODE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.MachineMode
-
- MACHINE_MODE_NONE - Static variable in class nxopen.uf.UFPath.MachineMode
-
- MACHINE_PUNCH - Static variable in class nxopen.uf.UFPath.MachineMode
-
- MACHINE_TOOL - Static variable in class nxopen.cam.CAMSetup.View
-
machine tool
- MACHINE_TOOL - Static variable in class nxopen.uf.UFUiOnt.TreeMode
-
- MACHINE_TOOL_BUILDER - Static variable in class nxopen.cam.SimulationOptionsBuilder.DialogType
-
machine tool builder
- MACHINE_TORCH - Static variable in class nxopen.uf.UFPath.MachineMode
-
- MACHINE_TURN - Static variable in class nxopen.uf.UFPath.MachineMode
-
- MACHINE_WIRE - Static variable in class nxopen.uf.UFPath.MachineMode
-
- MACHINE_ZERO - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.HomePtMethods
-
Use the Machine zero point as the home point
- MACHINE_ZERO - Static variable in class nxopen.sim.KinematicJunctionBuilder.SystemClass
-
the machine zero junction
- MachineAdjustmentBuilder - Interface in nxopen.presslinesimulation
-
Use this class to configure the machine adjustment axes of the press model.
- MachineAdjustmentBuilderList - Interface in nxopen.presslinesimulation
-
Represents a list of objects.
- MachineAdjustmentBuilderListBuilder - Interface in nxopen.presslinesimulation
-
- machineAllowance() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the machine allowance
License requirements: ug_die_design ("Die Design")
.
- machineAllowance() - Method in interface nxopen.tooling.DieDesignTrimPostBuilder
-
Returns the machine allowance used to rough offset product sheet
License requirements: ug_die_design ("Die Design")
.
- machineBaseJunctionName() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the machine base junction name
License requirements: None.
- machineConfiguratorFilename() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Returns the machine configurator filename with full path
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlBootVnck() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Boot the VNCK
Once booted, the vnck-machine remains booted until the part is closed or a 'machine replace' is executed.
- machineControlClearAlarm() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Clear Alarms for all channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlClearAlarm(String[]) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Clear Alarms for specific channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlDryRun(boolean) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Activate Machine Dry Run
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlFeedRateOverride(int) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Sets Machine Feed Rate Override
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlGetChannels() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Gets the Channel Names
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlGetCycleTime() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Gets the Machine Cycle Time
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlGetFeedRateOverrideMaximumValue() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Gets the Machine Feed Rate Override Maximum Value
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlReadVariable(String, String) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Read Variable e.g.
- MachineControlReadVariableData() - Constructor for class nxopen.sim.IsvControlPanelBuilder.MachineControlReadVariableData
-
- machineControlResetMachine() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Fast Reset Machine
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlResetMachineData() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Reset the Machine Data (SRAM) to the library Machine Data (SRAM)
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlResetNc() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: NC Reset for all channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlResetNc(String[]) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: NC Reset for specific channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlResetPart() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Reset Part
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlSaveMachineData() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Save the Machine Data (SRAM)
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlShowHmi() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Show HMI
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlShutdownVnck() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
- machineControlSingleBlockMode(boolean) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: Activate Machine Single Block Mode
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlStartNc() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: NC Start for all channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlStartNc(String[]) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: NC Start for specific channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlStopNc() - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: NC Stop for all channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlStopNc(String[]) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Machine Control Panel: NC Stop for specific channels
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification")
.
- machineControlWriteVariable(String, String, String, String) - Method in interface nxopen.sim.IsvControlPanelBuilder
-
Write Variable e.g.
- machineCycleSubroutineName() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the machine cycle subroutine name
License requirements: None.
- MACHINED_STATUS_COMPLETE - Static variable in class nxopen.uf.UFMfm.MachinedStatus
-
- MACHINED_STATUS_EMPTY - Static variable in class nxopen.uf.UFMfm.MachinedStatus
-
- MACHINED_STATUS_INCOMPLETE - Static variable in class nxopen.uf.UFMfm.MachinedStatus
-
- MACHINED_STATUS_REGENERATE - Static variable in class nxopen.uf.UFMfm.MachinedStatus
-
- machineeventnames - Variable in class nxopen.mechatronics.RuntimeNCBuilder.AxesAndMachineEventsData
-
The name of events fired by CSE.
- MachineGroupBuilder - Interface in nxopen.cam
-
- MachineGroupBuilder.RetrieveToolPocketInformation - Class in nxopen.cam
-
retrieve tool pocket information flag.
- MachineHeadGroupBuilder - Interface in nxopen.cam
-
- MachineKitBuilder - Interface in nxopen.sim
-
This class is used for the Machine Kit Create Dialog.
- MachineLibraryBuilder - Interface in nxopen.sim
-
This class is used for the Machine Library Dialog.
- machineMaxStep() - Method in interface nxopen.cam.ToolPathTiltMachine
-
Returns the max step distance
License requirements: None.
- machineName() - Method in interface nxopen.sim.MachineToolConfiguration
-
Returns the machine name
License requirements: None.
- machineName() - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
Returns the machine's name that is used for the postprocessor.
- machineOffset() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the indication if the male and female output bodies are to be built with machining.
- machinePartOccurrence() - Method in interface nxopen.cam.MachineGroupBuilder
-
Returns the Machine Part Occurrence
This is only needed when the option assembly positioning is selected in Part Mounting Dialog and should be called
before update cam setup.
- MachinePocketGroupBuilder - Interface in nxopen.cam
-
- MachinePocketGroupBuilder.RegisterType - Class in nxopen.cam
-
- MachineRelief - Interface in nxopen.die
-
Represents a die design machine relief feature.
- MachineReliefBuilder - Interface in nxopen.die
-
Represents a builder that is used to create or edit a
MachineRelief
feature.
- MachineReliefBuilder.MainProfileTypes - Class in nxopen.die
-
Specifies that the profile is for an exterior or interior profile.
- MachineReliefBuilder.TrimSheetTypes - Class in nxopen.die
-
Specifies what the trimming surface is defined by.
- MachineReliefBuilder.Types - Class in nxopen.die
-
Identifies the type of structure to be added, or subtracted, to the casting.
- machineStroke() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the machine stroke to calculate controller data.
- MachineTool - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner machine tool
To obtain an instance of this class use GetMachineTool (not yet implemented!)
- MachineToolConfiguration - Interface in nxopen.sim
-
Represents a Machine Tool Configuration object.
- MachineToolConfiguration.ControllerLines - Class in nxopen.sim
-
The controller line
- MachineToolConfiguration.MdynamicsTypes - Class in nxopen.sim
-
The mdynamics types
- MachineToolConfiguration.PlaneTypes - Class in nxopen.sim
-
The plane selection types
- MachineToolConfiguration.SwivelingTypes - Class in nxopen.sim
-
The machine swiveling types
- MachineToolConfiguration.TechnologyTypes - Class in nxopen.sim
-
The machine technology types
- MachineToolConfiguration.UnitTypes - Class in nxopen.sim
-
The units type
- machineToolMainMcs() - Method in interface nxopen.cam.ToolPathTiltMachine
-
Returns the main tool rotation MCS
License requirements: None.
- MachineTurretGroupBuilder - Interface in nxopen.cam
-
- MachineTurretGroupBuilder.MctTurrentWplTypes - Class in nxopen.cam
-
WorkPlane Type
- machineType() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the machine type method
License requirements: None.
- machineType - Variable in class nxopen.uf.UF.SystemInfo
-
- machineVendor() - Method in interface nxopen.sim.MachineToolConfiguration
-
Returns the machine vendor
License requirements: None.
- machineZeroCsys() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the machine zero csys
License requirements: None.
- MACHINING - Static variable in class nxopen.annotations.FinishMethod
-
Specifies machining finish
- MACHINING - Static variable in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType
-
- MACHINING_GRADED_JUNCTION - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- MACHINING_TIME_ANALYSIS - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Machining Time Analysis
- machiningAllowance() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the machining allowance, which is used for define the user machining allowance of the die.
- machiningAllowance() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the machining allowance, which is used for define the user machining allowance of the punch.
- MachiningFeature - Interface in nxopen.cam
-
- MachiningFeature - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner machining feature
To obtain an instance of this class use GetMachiningFeature of InProcessFeature or GetMachiningFeatures of Workpiece or PartFeature.
- MachiningFeatureGeom - Interface in nxopen.cam
-
This class represent the builder for machining feature geometry
.
- MachiningFeatureGeometry - Interface in nxopen.cam.fbm
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.AskMachiningFeaturesOfPartData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.AskMachiningFeaturesOfTypeData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.AskSelectedFeaListData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromModelingFeaturesData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromRecognizedFeaturesData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedArcsData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedEdgesData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedFacesData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromTaggedPointsData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.CreateMachiningFeaturesFromUserDefinedFeaturesData
-
- machiningFeatures - Variable in class nxopen.uf.UFMfm.RecognizeHolesData
-
- MachiningLinePlanner - Interface in nxopen.mfg.mlp
-
Represents the Line Planner
Use the static method in this class to obtain an instance.
- MachiningLinePlannerFactory - Class in nxopen.mfg.mlp
-
- MachiningLinePlannerFactory() - Constructor for class nxopen.mfg.mlp.MachiningLinePlannerFactory
-
- machiningOffsetTitleAttribute() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the title of the real attribute to be applied to the male and female bodies.
- MachiningRegionBuilder - Interface in nxopen.cam
-
Represents a Machining Region Builder .
- machiningText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the machining text
License requirements: None.
- machiningToleranceType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the tolerance type enum
License requirements: None.
- machiningType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the machining enum
License requirements: None.
- macLowerBound() - Method in interface nxopen.cae.CorrelModePairingBuilder
-
Returns the minimum MAC allowable for pairing by MAC
License requirements: None.
- MACRO_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MACRO_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- macroFile() - Method in interface nxopen.ame.ImportEplanPageMacroBuilder
-
Returns the eplan page macro template file
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- macroOnly - Variable in class nxopen.uf.UFCam.Preferences
-
- macroType() - Method in interface nxopen.ame.ImportEplanPageMacroBuilder
-
Returns the macro type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- macroType - Variable in class nxopen.cae.FunctionBuilder.TypesData
-
For Motion Simulation or Advanced Simulation or General Purpose
- macValues - Variable in class nxopen.cae.CorrelSolution.ComputeMacsData
-
the MAC values computed
- MAG - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ComplexScalarType
-
- MAG - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ScalarType
-
- MAG - Static variable in class nxopen.fields.DisplayPropertiesBuilder.VectorType
-
- MAG - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices
-
Deprecated.
Magnitude
- mag(double[]) - Method in interface nxopen.uf.UFVec2
-
- mag(double[]) - Method in interface nxopen.uf.UFVec3
-
- magazineIndex() - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
Returns the magazine index for this automatic protection area
License requirements: None.
- magazineLocationIndex() - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
Returns the magazine location index for this automatic protection area
License requirements: None.
- MAGENTA_MAGENTA_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MAGENTA_MAGENTA_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MAGENTA_SUNSET - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Magenta sunset.
- magFunction() - Method in interface nxopen.motion.VObject
-
Returns the magnitude function
License requirements: None.
- magicFile() - Method in interface nxopen.motion.TirePropertyBasicParameters
-
Returns the magic file.
- MAGNETIC_FIELD - Static variable in class nxopen.cae.Result.Quantity
-
- MAGNETIC_FLUX_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- MAGNETICS - Static variable in class nxopen.cae.SimResultReference.Type
-
magnetics result
- MAGNIFICATION - Static variable in class nxopen.display.CameraBuilder.LensAngle
-
Magnification
- magnification() - Method in interface nxopen.display.CameraBuilder
-
Returns the magnification
License requirements: None.
- MAGNITUDE - Static variable in class nxopen.cae.FreeBodyResultsBuilder.VectorDisplay
-
display single magnitude vector
- magnitude() - Method in interface nxopen.cae.optimization.TBSConstraintBuilder
-
Returns the magnitude type of the constraint
License requirements: None.
- MAGNITUDE - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
request the magnitude of a 3D vector
- MAGNITUDE - Static variable in class nxopen.cae.Result.Component
-
- MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Magnitude of the complex data for 2D plot
- MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption2DBarChart
-
Magnitude of the complex data for 2D bar chart plot
- MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption2DColorContour
-
Magnitude of the complex data for 2D color contour plot plot
- MAGNITUDE - Static variable in class nxopen.cae.xyplot.ComplexOption3D
-
Magnitude of the complex data for 3D plot
- MAGNITUDE - Static variable in class nxopen.motion.LinkInitialVelocity.AngularVelocityType
-
Magnitude type define rotate vector
- magnitude - Variable in class nxopen.uf.UFMotion.LinkInitialVel
-
- MAGNITUDE - Static variable in class nxopen.uf.UFMotion.VectorComponent
-
- magnitude - Variable in class nxopen.uf.UFSo.SplineData
-
- magnitude - Variable in class nxopen.uf.UFVec2.UnitizeData
-
- magnitude - Variable in class nxopen.uf.UFVec3.UnitizeData
-
- MAGNITUDE_PHASE - Static variable in class nxopen.cae.AfuData.OrdinateType
-
Ordinate Data is Complex with Amplitude and Phase values
- MAGNITUDE_PHASE - Static variable in class nxopen.cae.xyplot.ComplexOption2D
-
Magnitude and phase angle of complex data for 2D plot
- magnitudeExpression() - Method in interface nxopen.motion.VObject
-
Returns the magtitude expression
License requirements: None.
- magnitudeFunction - Variable in class nxopen.uf.UFMotion.VectorForceTorque
-
- magnitudeProfile() - Method in interface nxopen.motion.VObject
-
Returns the magnitude profile
License requirements: None.
- MAIN - Static variable in class nxopen.cae.Mesh2dBuilder.GeometryType
-
Deprecated.
main geometry
- MAIN - Static variable in class nxopen.cae.xyplot.Preference.TargetGraphicWindowOption
-
Only shows plot graph on main graphic window
- MAIN - Static variable in class nxopen.cam.OrientGeomBuilder.CsysPurposeModes
-
CSYS purpose mode: Main
- MAIN - Static variable in class nxopen.sim.SimDebugBuilder.KinematicModelType
-
Main Kinematic Model
- MAIN_DIR - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingRuleTypes
-
Tool tilting rule main direction
- MAIN_SHIP_ITEM - Static variable in class nxopen.annotations.ShipDimensionBuilder.GroupType
-
Group type MainShipItem
- mainDeckAttributes() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the main deck attributes
License requirements: None.
- MainDeckData() - Constructor for class nxopen.die.DeckParentBuilder.MainDeckData
-
- mainDeckOffset() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the offset for the main deck either measured from the main deck specification or the base plane
License requirements: None.
- mainDeckPlane() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the main deck plane
License requirements: None.
- mainDeckSection() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the main deck section
License requirements: None.
- MainDimensions - Interface in nxopen.features.shipdesign
-
Represents a main dimensions feature
To create or edit an instance of this class, use
MainDimensionsBuilder
Created in NX5.0.0
- MainDimensionsBuilder - Interface in nxopen.features.shipdesign
-
- mainLifterBodies() - Method in interface nxopen.tooling.DefineLifterBuilder
-
Returns the main lifter bodies
License requirements: None.
- mainLifterDriveBodies() - Method in interface nxopen.tooling.DefineLifterBuilder
-
Returns the main lifter drive body that drives the lifter body
License requirements: None.
- mainLifterDriveVector() - Method in interface nxopen.tooling.DefineLifterBuilder
-
Returns the main lifter drive vector
License requirements: None.
- mainLifterVector() - Method in interface nxopen.tooling.DefineLifterBuilder
-
Returns the main lifter vector that the main lifter moves along
License requirements: None.
- mainProfile() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the primary profile for the machine relief casting.
- MainProfileData() - Constructor for class nxopen.die.SteelInsertBuilder.MainProfileData
-
- mainProfileType() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the value specifying the main profile for the Thicken operation.
- mainRunEndSelection() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the end of the main run.
- mainRunMethod() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the main run method.
- mainRunOrigin() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the main run origin.
- mainRunStartSelection() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the start of the main run.
- mainSpindle() - Method in interface nxopen.sim.KinematicChannelBuilder
-
Returns the main spindle of the channel
License requirements: None.
- mainSpindleFace() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the main spindle face.
- mainStock() - Method in interface nxopen.features.shipdesign.PillarBuilder
-
Returns the stock used to build the pillar from.
- mainSymbolCustomText() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the main symbol custom text specifies the custom text to display in the main callout symbol
License requirements: None.
- mainSymbolText() - Method in interface nxopen.annotations.PartsListBuilder
-
Returns the main symbol text specifies the text to display in the main callout symbol
License requirements: None.
- mainSymbolText - Variable in class nxopen.uf.UFPlist.Prefs
-
- MAINTAIN - Static variable in class nxopen.assemblies.DesignElementBuilder.PositioningOption
-
Maintains the existing positions of the design elements.
- MAINTAIN - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentLayerOption
-
Maintain the layer of the component being replaced out
- MAINTAIN - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentNameOption
-
Maintain the component name of the component being replaced out
- MAINTAIN - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentReferenceSet
-
Maintain the reference set of the component being replaced out
- MAINTAIN - Static variable in class nxopen.cam.CutParametersFinishPassesTypes
-
Maintain
- MAINTAIN - Static variable in class nxopen.cam.SpringPasses.Types
-
Alternate Spring Passes: Maintain
- MAINTAIN - Static variable in class nxopen.display.LayerSettingsBuilder.LayerOptionType
-
Maintain layer
- MAINTAIN_ALL_PARAMS - Static variable in class nxopen.uf.UFPart.ExportParamsMode
-
- MAINTAIN_AND_INTERSECT - Static variable in class nxopen.features.EdgeBlendBuilder.Overlap
-
Maintain Blend and Intersect
- MAINTAIN_CENTER - Static variable in class nxopen.routing.OffsetPathCollection.BendType
-
Maintain Center
- MAINTAIN_PARAMS - Static variable in class nxopen.uf.UFPart.ExportParamsMode
-
- MAINTAIN_RADIUS - Static variable in class nxopen.routing.OffsetPathCollection.BendType
-
Maintain Radius
- maintainAngle() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Returns the maintain angle setting.
- maintainBlankStatus() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not previously blanked objects will be visible when a sketch is activated
License requirements: None.
- maintainHelixHandedness() - Method in interface nxopen.features.MirrorBuilder
-
Returns the option to maintain Helix feature handedness.
- maintainLayerStatus() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not the work layer remains the same or returns to its previous
value when a sketch is deactivated.
- maintainLength() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Returns the maintain length setting.
- maintainLength() - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
Returns the maintain length setting.
- maintainRelationships() - Method in interface nxopen.assemblies.ReplaceComponentBuilder
-
Returns the maintain relationships
License requirements: None.
- maintainStockFlag() - Method in interface nxopen.routing.OffsetPath
-
Returns the use maintain stock flag for an offset object.
- maintainThreadHandedness() - Method in interface nxopen.features.MirrorBuilder
-
Returns the option to maintain symbolic thread handedness.
- maintainTilt() - Method in interface nxopen.cam.ToolPathTiltAvoidance
-
Returns the maintain tilt
License requirements: None.
- maintainTilt() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- maintainWorkPart - Variable in class nxopen.uf.UFAssem.Options
-
- maintainZeroBendRadius() - Method in interface nxopen.features.sheetmetal.ConvertToSheetmetalBuilder
-
Returns the option for Maintain zero bend radius.
- mainText - Variable in class nxopen.uf.UFDrf.AskDimensionTextData
-
- mainTextLines - Variable in class nxopen.annotations.Dimension.DimensionTextData
-
List of main text lines
- mainType() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the type of mesh control
License requirements: nx_masterfem ("Finite Element Modeling")
.
- mainWallCenterLine() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the main wall center line profile, which is used for user defined main wall shape.
- major - Variable in class nxopen.uf.UFEval.Ellipse
-
- MAJOR_ANGULAR_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
- MAJOR_AXIS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamXYZAxis
-
Major Axis
- MAJOR_DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- MajorAngularDimension - Interface in nxopen.annotations
-
- MajorAngularDimensionBuilder - Interface in nxopen.annotations
-
- majorDia - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- majorDiameter() - Method in interface nxopen.cam.HoleBossSet
-
Returns the Major Diameter
License requirements: None.
- majorDiameter - Variable in class nxopen.uf.UFModlGeneral.AskTorusParmsData
-
- majorGridDisplayStyleSettings() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns the major grid display style
License requirements: None.
- majorGridSpacing - Variable in class nxopen.preferences.WorkPlane.GridSize
-
Distance between major grid lines
- majorLineSpacing() - Method in interface nxopen.display.GridBuilder
-
Returns the major line spacing
License requirements: None.
- majorLineStyle() - Method in interface nxopen.display.GridBuilder
-
Returns the major line style
License requirements: None.
- majorLineWeight() - Method in interface nxopen.display.GridBuilder
-
Returns the major line weight
License requirements: None.
- majorPoint() - Method in interface nxopen.SketchEllipseBuilder
-
Returns the point in major axis to calculate the major radius
License requirements: None.
- majorRadius() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the major radius of the torus
License requirements: None.
- majorRadius() - Method in interface nxopen.Ellipse
-
Returns the major radius.
- majorradius - Variable in class nxopen.Ellipse.ParametersData
-
- majorradius - Variable in class nxopen.markup.Ellipse.CenterAndRadiusData
-
- majorRadius() - Method in interface nxopen.SketchEllipseBuilder
-
Returns the major radius
License requirements: None.
- majorRevision - Variable in class nxopen.uf.UFPs.KernelVersion
-
- MAKE_CORNER - Static variable in class nxopen.features.TrimAndExtendBuilder.OperationType
-
- MAKE_CORNER - Static variable in class nxopen.features.TrimExtendBuilder.CreationTypes
-
Make Corner
- MAKE_NON_SECTIONED - Static variable in class nxopen.drawings.SectionInViewBuilder.EditSxtype
-
- MAKE_NORMAL - Static variable in class nxopen.features.StyledSweepBuilder.SectionOrientationOptions
-
Make Normal
- MAKE_SECTIONED - Static variable in class nxopen.drawings.SectionInViewBuilder.EditSxtype
-
- MAKE_UNIQUE - Static variable in class nxopen.pdm.PartOperationCopyBuilder.OperationSubType
-
MakeUnique flavour of Save As dialog
- makeActive() - Method in interface nxopen.assemblies.PositioningGroupBuilder
-
Returns the option to specify whether a newly created positioning group
should be made active after creation or not.
- makeActive() - Method in interface nxopen.routing.Run
-
Set a Run as Active.
- makeAllFeaturesInactive() - Method in interface nxopen.Part
-
Makes all the features of the part inactive
License requirements: solid_modeling ("SOLIDS MODELING")
.
- makeBoolean(boolean) - Method in interface nxopen.uf.UFKf
-
- MakeComponentUniqueBuilder - Interface in nxopen.layout2d
-
- makeConstraint(Point) - Method in interface nxopen.features.FitCurveBuilder
-
In case of point targets, makes a target point a positional constraint.
- makeContainerPart(Part) - Method in interface nxopen.shipdesign.GeneralArrangementManager
-
Makes the part to be Ship Container.
- makeCurrentFeature() - Method in interface nxopen.features.Feature
-
Make current feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- makeCurrentOnError() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option "Make Current on Error" gives choice, whether the user
wants to make error feature current when features contain
errors during feature update/playback.
- makeCurrentStep(Tag) - Method in interface nxopen.uf.UFAssem
-
- makeDatumsExternal() - Method in interface nxopen.Sketch
-
- makeDatumsExternal2() - Method in interface nxopen.Sketch
-
Makes the internal sketch placement face and directional reference datums external.
- makeDatumsInternal() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option specifying whether to automatically make the datums internal during
the sketch creation.
- makeDatumsInternal() - Method in interface nxopen.Sketch
-
- makeDefault() - Method in interface nxopen.Unit
-
Makes this unit the default unit for its Measure
License requirements: None.
- makeDisplayedPart() - Method in interface nxopen.FileNew
-
Returns the property that controls if the new file should be made the displayed part
License requirements: None.
- makeDisplayUpToDate() - Method in interface nxopen.uf.UFDisp
-
- makeElementResult(boolean) - Method in interface nxopen.cae.CrossSectionParameters
-
Make Nodal result to Element Result.
- makeElementResult(boolean) - Method in interface nxopen.cae.ResultParameters
-
Make Nodal and Element-Nodal result to Element Result.
- makeError(int) - Method in interface nxopen.uf.UFKf
-
- makeFeature(String, Face[], Face[], boolean) - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Creates a feature based on name, floor and wall faces
License requirements: None.
- makeFirstCurrent() - Method in interface nxopen.features.FeatureReplayBuilder
-
Makes the first feature of the work part current.
- makeFlatSolidExternal() - Method in interface nxopen.features.FlatPattern
-
Makes the flat pattern's parent flat solid feature external.
- makeFlatSolidInternal() - Method in interface nxopen.features.FlatPattern
-
Makes the flat pattern's parent flat solid feature internal.
- makeFrame(double[]) - Method in interface nxopen.uf.UFKf
-
- makeInactive() - Method in interface nxopen.routing.Run
-
Set a Run as Inactive and the Active Specification will be changed to Default Specification of the
discipline, if no discipline is being used then the Active Specification will be set to None.
- makeInputCurvesDashed() - Method in interface nxopen.features.TrimCurve2Builder
-
Returns the make input curves dashed option
License requirements: None.
- makeInstance(UFVariant) - Method in interface nxopen.uf.UFKf
-
- makeInstanceDbGlobal(PlcBlock) - Method in interface nxopen.ame.AMEManager
-
Change the instance data block to single / global instance
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- makeInteger(int) - Method in interface nxopen.uf.UFKf
-
- makeLastCurrent() - Method in interface nxopen.features.FeatureReplayBuilder
-
Makes the last feature of the work part current.
- makeLinkedWork() - Method in interface nxopen.features.PartModule
-
- makeList(UFVariant) - Method in interface nxopen.uf.UFKf
-
- makeMainWork() - Method in interface nxopen.features.PartModule
-
- makeMoldWizardFills(double, NXObject[], Face[]) - Method in interface nxopen.tooling.EdgePatchBuilder
-
Create a mold wizard fill.
- makeMultipleInstanceDb(PlcBlock) - Method in interface nxopen.ame.AMEManager
-
Change the instance data block to multiple instance
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- makeName(int) - Method in interface nxopen.uf.UFKf
-
- makeNextBooleanCurrent() - Method in interface nxopen.features.FeatureReplayBuilder
-
Makes the next boolean feature of the work part current.
- makeNextCurrent() - Method in interface nxopen.features.FeatureReplayBuilder
-
Makes the next feature of the work part current.
- makeNoPartModuleActive() - Method in interface nxopen.Part
-
Deactivates any part module that is active in the given part.
- makeNumber(double) - Method in interface nxopen.uf.UFKf
-
- MakeOffset - Interface in nxopen.features
-
Represents a make offset feature
To create or edit an instance of this class, use
MakeOffsetBuilder
Created in NX7.5.0
- MakeOffsetBuilder - Interface in nxopen.features
-
- makeOriginAssociative() - Method in interface nxopen.SketchInPlaceBuilder
-
- makeParentSketchInternal(boolean) - Method in interface nxopen.features.EmbossBuilder
-
Set the parent sketch internalization status for use during emboss feature creation
License requirements: solid_modeling ("SOLIDS MODELING")
.
- makePmi(Annotation) - Method in interface nxopen.annotations.AnnotationManager
-
Flag the annotation as PMI object.
- makePoint(double[]) - Method in interface nxopen.uf.UFKf
-
- makePositionIndependent() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the make position independent
License requirements: None.
- makePositionIndependent() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the option to specify that the extracted faces should be position independent
License requirements: None.
- makePositionIndependent() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns the make position independent
License requirements: None.
- makePositionIndependent() - Method in interface nxopen.features.WaveDatumBuilder
-
Returns the makepositionindependent
License requirements: None.
- makePositionIndependent() - Method in interface nxopen.features.WaveInterfaceLinkerBuilder
-
Returns the make position independent
License requirements: None.
- makePositionIndependent() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the make position independent option
License requirements: None.
- makePositionIndependent() - Method in interface nxopen.features.WavePointBuilder
-
Returns the makepositionindependent
License requirements: None.
- makePositionIndependent() - Method in interface nxopen.features.WaveRoutingBuilder
-
Returns the makepositionindependent
License requirements: None.
- makePositionIndependent() - Method in interface nxopen.features.WaveSketchBuilder
-
Returns the make position independent option
License requirements: None.
- makePreviousCurrent() - Method in interface nxopen.features.FeatureReplayBuilder
-
Makes the previous feature of the work part current.
- makeReference() - Method in interface nxopen.SketchConstraintBuilder
-
Returns the flag specifying whether or not to make the centerline reference geometry
License requirements: None.
- makeRunActive(Component, NXObject) - Method in interface nxopen.mechanicalrouting.LogicalDesignService
-
Makes a
Run
active in given
Component
that represents a container for the Routing design, such as a subset in Workset
License requirements: routing_base ("Routing Basic")
Created in NX11.0.0
- makeSketchesInternal() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option specifying whether to automatically make sketch internal during
feature creation.
- makeSketchExternal() - Method in interface nxopen.features.Feature
-
Make the parent sketch external for reuse by other features.
- makeSketchInternal() - Method in interface nxopen.features.Feature
-
Make the parent sketch internal if referenced only by this feature.
- makeSketchInternal() - Method in interface nxopen.linedesigner.FloorEquipmentBuilder
-
Returns the make sketchiInternal
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- makeSketchInternal() - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
Returns
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- MakeSolid - Interface in nxopen.features
-
Represents a make solid feature that converts closed sheet bodies to solid bodies.
- MakeSolidBuilder - Interface in nxopen.features
-
- makeString(String) - Method in interface nxopen.uf.UFKf
-
- makeSystemDialogs(String, Part) - Method in interface nxopen.cam.CAMSession
-
Capture the customization in the part as system customization,
this API is only for internal use and so will not be documented
License requirements: None.
- makeTag(Tag) - Method in interface nxopen.uf.UFKf
-
- makeTimestampsConsecutive() - Method in interface nxopen.features.FeatureGroup
-
- makeTimestampsSequential(boolean) - Method in interface nxopen.features.FeatureGroup
-
Try to make timestamps of members of feature group sequential.
- MakeUniquePartBuilder - Interface in nxopen.assemblies
-
- MakeUniquePartBuilder.Option - Class in nxopen.assemblies
-
Represents possible copy assembly options for unique part
- makeUpToDate() - Method in interface nxopen.DisplayManager
-
Ensures that previously invoked display operations are complete.
- makeUpToDate(NXObject[], int) - Method in interface nxopen.Update
-
Updates all given out-of-date features or expressions to make them up to date
License requirements: None.
- makeUser(UFVariant) - Method in interface nxopen.uf.UFKf
-
- makeVector(double[]) - Method in interface nxopen.uf.UFKf
-
- makeWork() - Method in interface nxopen.View
-
Makes the given view the work view.
- makeWorkPart() - Method in interface nxopen.assemblies.CreateOverridePartBuilder
-
Returns the state to determine whether to make the new override part as work part.
- MALE - Static variable in class nxopen.die.DrawBeadBuilder.OutputTypes
-
Creates the male bead only.
- MALE - Static variable in class nxopen.HumanData.GenderType
-
- MALE - Static variable in class nxopen.HumanHandsDialogBuilder.GenderType
-
- maleBeadHeight() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male bead height value.
- maleBeadPosition() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the casting in which to create the male bead.
- maleBeadWidthType() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the male bead width type.
- maleFaceAttribute() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the attribute definition to be applied to the faces of the male bead sheet body.
- maleLeftSheetRadius() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male sheet radius value for the "Left" side.
- maleLeftTopRadius() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male top radius value for the "Left" side.
- maleLeftWallAngle() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male wall angle value for the "Left" side.
- maleLeftWidth() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male width value for the "left" side.
- maleRightSheetRadius() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male sheet radius value for the "Right" side.
- maleRightTopRadius() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male top radius value for the "Right" side.
- maleRightWallAngle() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male wall angle value for the "Right" side.
- maleRightWidth() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male width value for the "Right" side.
- maleSheetAttribute() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the attribute definition to be applied to the male bead sheet body.
- maleTransitionLength() - Method in interface nxopen.die.DrawBeadSegmentBuilder
-
Returns the expression containing the male transition length value.
- MANAGE - Static variable in class nxopen.tooling.ChangeoverManagementBuilder.Types
-
the manage mode
- Manage2dSymbolsBuilder - Interface in nxopen.ame
-
- Manage2dSymbolsBuilder.SymbolRepresentationTypes - Class in nxopen.ame
-
Representation type of symbol
- Manage3DModelsBuilder - Interface in nxopen.ame
-
- manageConstraintsAfterEdit(NXObject[], boolean) - Method in interface nxopen.Sketch
-
Deletes or adjusts constraints of the input geometry that are incompatible after geometry edit.
- managedModeComponentLoadMethod() - Method in interface nxopen.LoadOptions
-
Returns the option indicating what method to use to determine how to configure assembly structure
in managed mode
License requirements: None.
- managedModeLoadOptions - Variable in class nxopen.uf.UFAssem.LoadOptions
-
- managedModeLoadOptions - Variable in class nxopen.uf.UFAssem.Options
-
- ManageEclassMappingBuilder - Interface in nxopen.ame
-
- manageFeatureTag(boolean, Feature) - Method in interface nxopen.features.shipdesign.FeaturesToTagBuilder
-
Manages (set or unset) the ship manufacturing object on selected features
License requirements: nx_ship_detail ("Ship Detail Design") OR nx_ship_mfg_prep ("Ship Manufacturing")
.
- ManageInlineBehaviorBuilder - Interface in nxopen.mechanicalrouting
-
- ManageObjectTypeBuilder - Interface in nxopen.ame
-
- Manager - Interface in nxopen.cae.qualityaudit
-
- Manager - Interface in nxopen.cae.responsesimulation
-
Represents the Response Dynamics manager to contain all Response Dynamics objects
To obtain an instance of this class, refer to
SimSimulation
Created in NX5.0.0
- Manager.ActionType - Class in nxopen.cae.qualityaudit
-
Action type to be used in the quality audit process.
- manageTemporaryObjectsType() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the management type for temporary objects.
- ManageToolPartBuilder - Interface in nxopen.cam
-
Represents an Export Tool Part Builder
This is an abstract class, and cannot be instantiated.
- manageToolPartBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the manage tool part builder
License requirements: cam_base ("CAM BASE")
.
- ManageToolPartBuilder.AskR1ToolTipJunctionData - Class in nxopen.cam
-
- ManageToolPartBuilder.AskToolTipJunctionData - Class in nxopen.cam
-
- MANDATORY - Static variable in class nxopen.annotations.MasterSymbolListItemBuilder.TextTypes
-
- MANDATORY - Static variable in class nxopen.annotations.TextType
-
Specifies text defined in the master symbol which can't be
modified in the custom symbol.
- MANDATORY_INPUT - Static variable in class nxopen.features.CustomAttribute.Property
-
- MANDATORY_TEXT - Static variable in class nxopen.uf.UFDrf.CustomSymbolTextType
-
- MANIFESTATION - Static variable in class nxopen.CGMBuilder.RelationOption
-
Manifestation
- MANIFESTATION - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.RelationTypeEnum
-
- MANIFESTATION - Static variable in class nxopen.PrintPDFBuilder.RelationOption
-
Manifestation
- Manikin - Interface in nxopen.features.vehicledesign
-
Represents a manikin automotive feature
To create or edit an instance of this class, use
ManikinBuilder
Created in NX7.5.0
- ManikinBuilder - Interface in nxopen.features.vehicledesign
-
- ManikinBuilder.ClassificationType - Class in nxopen.features.vehicledesign
-
the vehicle classification type
- ManikinBuilder.PositionType - Class in nxopen.features.vehicledesign
-
the vehicle seat position type
- ManikinBuilder.SAEPercentileType - Class in nxopen.features.vehicledesign
-
the vehicle percentile type
- ManikinBuilder.StandardType - Class in nxopen.features.vehicledesign
-
the vehicle standard type
- MANIPULATOR - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.DirectionTypes
-
orientation maninpulator
- MANIPULATOR - Static variable in class nxopen.mechanicalrouting.TransformBlockBuilder.Transformtype
-
Manipulator allows you to move a point dynamically to any location in wcs.
- manipulatormatrix - Variable in class nxopen.features.FlatteningAndFormingBuilder.DestinationFrameData
-
- manipulatorMatrix() - Method in interface nxopen.FlatteningBuilder
-
- manipulatorMatrix() - Method in interface nxopen.geometricutilities.ModlMotion
-
- manipulatororigin - Variable in class nxopen.features.FlatteningAndFormingBuilder.DestinationFrameData
-
- manipulatorOrigin() - Method in interface nxopen.FlatteningBuilder
-
- manipulatorOrigin() - Method in interface nxopen.geometricutilities.ModlMotion
-
- MANUAL - Static variable in class nxopen.annotations.SuppressPMIBuilder.SuppressionMethodType
-
Suppress selected PMI objects.
- MANUAL - Static variable in class nxopen.assemblies.MechanicalRoutingSubsetBuilder.SurroundingDataRecipeMethod
-
- MANUAL - Static variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.MatchingType
-
The connections are done manually
- MANUAL - Static variable in class nxopen.cae.EdgeSticherBuilder.StitchMethods
-
- MANUAL - Static variable in class nxopen.cae.Mesh3dHexBuilder.Type
-
- MANUAL - Static variable in class nxopen.cae.MMCCreateBuilder.Types
-
Manual Create
- MANUAL - Static variable in class nxopen.cae.PreTestExciterConfigBuilder.MethodChoiceType
-
- MANUAL - Static variable in class nxopen.cae.SetManager.DistributedPlanesPosition
-
the position or radius is manually defined
- MANUAL - Static variable in class nxopen.cae.SuppressHoleBuilder.OptionChoice
-
- MANUAL - Static variable in class nxopen.cae.SweepBetweenMeshBuilder.Types
-
Deprecated.
Manual
- MANUAL - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.Cleanup
-
- MANUAL - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.FinalRetractTypes
-
Final Retract Type: Manual
- MANUAL - Static variable in class nxopen.cam.FeatureRecognitionBuilder.RecognitionEnum
-
Manual Feature Recognition
- MANUAL - Static variable in class nxopen.cam.InspectionMethodBuilder.InspectionModes
-
Manual
- MANUAL - Static variable in class nxopen.cam.InspectionMethodBuilder.TransitionTypes
-
Manual Transition Point
- MANUAL - Static variable in class nxopen.cam.InspectionPathBuilder.InspectModeType
-
Manual
- MANUAL - Static variable in class nxopen.cam.RoughFinishTurningBuilder.RegionSelectionTypes
-
Manual cut region selection.
- MANUAL - Static variable in class nxopen.cam.TurnFeatureGeomBuilder.CutRegionSelectionModes
-
Manual cut region selection.
- MANUAL - Static variable in class nxopen.die.DrawBeadBuilder.TransitionDefinitionTypes
-
User specified start and end segments so transition areas are fully defined.
- MANUAL - Static variable in class nxopen.die.PierceItemBuilder.SizingMethodOption
-
Will use size specified
- MANUAL - Static variable in class nxopen.drawings.ViewBoundaryBuilder.Type
-
top view
- MANUAL - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.Option
-
By Manual
- MANUAL - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ViewBoundaryOption
-
view boundary Manual
- MANUAL - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.PairingStrategyType
-
Manual pairing process
- MANUAL - Static variable in class nxopen.features.shipdesign.CuttingSideFacesBuilder.Types
-
Process all the selected solids to assign the cutting side attributes.
- MANUAL - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.Types
-
Creates a single line on the surface where the maximum force is to be applied.
- MANUAL - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.Types
-
Manually specify the coordinate system.
- MANUAL - Static variable in class nxopen.features.shipdesign.ShipIntersectionsBuilder.CreationType
-
- MANUAL - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.Type
-
- MANUAL - Static variable in class nxopen.geometricutilities.Rebuild.RebuildTypes
-
Specify the rebuild degree manually.
- MANUAL - Static variable in class nxopen.HumanPosturePredictionBuilder.TransmissionType
-
Indicate manual transmission
- MANUAL - Static variable in class nxopen.motion.SplineBeamBuilder.DefinitionMethodType
-
Manual
- MANUAL - Static variable in class nxopen.routing.electrical.ConnectorDevice.Assign
-
- MANUAL - Static variable in class nxopen.SurfaceRebuildData.Type
-
Manual
- MANUAL - Static variable in class nxopen.visualreporting.Classifier.GroupingMethodOption
-
Grouping is manual
- MANUAL - Static variable in class nxopen.weld.FilletBuilder.EnumExtendEdges
-
- MANUAL - Static variable in class nxopen.weld.WeldMeasurementSizeMethod
-
manual size method
- MANUAL_ARROWS_IN - Static variable in class nxopen.annotations.TextPlacement
-
Specifies manual text placement with arrows inside
the extension lines
- MANUAL_ARROWS_IN_SAME_DIRECTION - Static variable in class nxopen.annotations.TextPlacement
-
Specifies manual text placement with arrows in the same direction
- MANUAL_ARROWS_OUT - Static variable in class nxopen.annotations.TextPlacement
-
Specifies manual text placement with arrows outside
the extension lines
- MANUAL_DATA - Static variable in class nxopen.cae.responsesimulation.InitialConditions.EntryMethod
-
- MANUAL_EDGE_TO_EDGE - Static variable in class nxopen.cae.EdgeSticherBuilder.Types
-
- MANUAL_EDGE_TO_FACE - Static variable in class nxopen.cae.EdgeSticherBuilder.Types
-
- MANUAL_PATTERN_ACTION - Static variable in class nxopen.cam.ToolpathEventType
-
- MANUAL_POINT - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes
-
Measured Point
- MANUAL_RECTANGLE_TYPE - Static variable in class nxopen.uf.UFDraw.BoundaryType
-
- MANUAL_ROUTE - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteTypes
-
- MANUAL_ROUTE_COMP - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- MANUAL_ROUTE_COMPONENT_LEVEL - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Manual Route command using component level routing.
- MANUAL_ROUTE_PIN - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- MANUAL_ROUTE_PIN_LEVEL - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Manual Route command using pin level routing.
- MANUAL_SUPPORTS - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.DeckSupportTypeAPI
-
- manualChangeFlag - Variable in class nxopen.uf.UFPath.ToolChange
-
- ManualControl - Interface in nxopen.cam
-
Represents a ManualControl operation
To create or edit an instance of this class, use
ManualControlBuilder
Created in NX10.0.3
- ManualControlBuilder - Interface in nxopen.cam
-
- manualDegree() - Method in interface nxopen.geometricutilities.Rebuild
-
Returns the degree when rebuild type is manual.
- ManualElementsResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit ManualElementsResult is a class containing information about nodes connecting components.
- ManualFeatureBuilder - Interface in nxopen.cam
-
- ManualFeatureBuilderList - Interface in nxopen.cam
-
Represents a list of objects.
- ManualLoadExtraction - Interface in nxopen.cae.aerostructures
-
This is the ManualLoadExtraction class
.
- manuallyAssignConnector(Component) - Method in interface nxopen.routing.electrical.ConnectorDevice
-
Assign a connector manually.
- manuallyDelete() - Method in interface nxopen.routing.SingleDevice
-
Deletes the single device.
- manuallyRoute(ElectricalStockDevice.RouteLevel, ISegment[]) - Method in interface nxopen.routing.electrical.ElectricalStockDevice
-
- ManualMorphBuilder - Interface in nxopen.cae
-
- ManualMorphBuilder.MapMethod - Class in nxopen.cae
-
Represents the chosen type to apply node mapping on selected geometry.
- ManualMorphBuilder.MapType - Class in nxopen.cae
-
Represents the type of Manual Mapping
- ManualMove - Interface in nxopen.cam
-
Represents Manual Move
To obtain an instance of this class us
OperationCollection
Created in NX4.0.0
- ManualNodeAssociationBuilder - Interface in nxopen.cae
-
- manualPoint() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns a flag to indicate if manual point creation is allowed
License requirements: None.
- ManualRouteBuilder - Interface in nxopen.routing
-
- ManualRouteBuilder.CreateValidPointsOnPathsData - Class in nxopen.routing
-
- ManualRouteBuilder.FindPathsFromMultiplePointsData - Class in nxopen.routing
-
- manualSweepBetween() - Method in interface nxopen.cae.SweepBetweenMeshBuilder
-
- ManualSweepBetweenListItemSelection - Interface in nxopen.cae
-
- ManualSweepBetweenListItemSelectionList - Interface in nxopen.cae
-
Represents a list of objects.
- ManualSweepBetweenSelection - Interface in nxopen.cae
-
- manualTiltingType() - Method in interface nxopen.cam.ToolPathTiltTilting
-
Returns the manual tilt
License requirements: None.
- manualToggle() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the manual mode toggle
License requirements: None.
- manualToolChange() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Manual tool change toggle
License requirements: None.
- manufacturerName() - Method in interface nxopen.sim.postconfigurator.CreationPostBuilder
-
Returns the manufacturer's name that is used for the postprocessor.
- MANUFACTURING - Static variable in class nxopen.features.shipdesign.ConceptFromSpreadsheetBuilder.Type
-
- MANUFACTURING_MODE - Static variable in class nxopen.features.shipdesign.CompareModeBuilder.CompareMode
-
- MANUFACTURING_MODE - Static variable in class nxopen.features.shipdesign.SetModeBuilder.DesMfgMode
-
- MANUFACTURING_REGION - Static variable in class nxopen.tooling.TrimSolidBuilder.Types
-
Region with attribute faces.
- ManufacturingAssemblyNavigatorBuilder - Interface in nxopen.features.shipdesign
-
This class is used to define Manufacturing Assembly Structure.
- ManufacturingAssemblyNavigatorBuilder.ContainerType - Class in nxopen.features.shipdesign
-
Container Type Structure or Weld
- ManufacturingAssemblyNavigatorBuilder.OrientationType - Class in nxopen.features.shipdesign
-
Container Orientation Types
- manufacturingCollector() - Method in interface nxopen.features.shipdesign.ProfileListBuilder
-
Returns the components of this part that contain a profile will be processed.
- ManufacturingDataBuilder - Interface in nxopen.features.shipdesign
-
This class is used to generate Manufacturing data.
- manufacturingDesignMode() - Method in interface nxopen.features.shipdesign.SetModeBuilder
-
Returns the manufacturing and design mode.
- manufacturingGeometry() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ManufacturingGeometryCollection instance belonging to this part .
- ManufacturingGeometryBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to create manufacturing geometry.
- ManufacturingGeometryCollection - Interface in nxopen.tooling
-
Represents a collection of Manufacturing Geometry builder.
- manufacturingInformation() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
Returns the manufacturing stock builder that holds the manufacturing data.
- manufacturingInformation() - Method in interface nxopen.features.shipdesign.CornerCutBuilder
-
Returns the manufacturing stock builder that holds the manufacturing data.
- manufacturingInformation() - Method in interface nxopen.features.shipdesign.Cutout2Builder
-
Returns the manufacturing stock builder that holds the manufacturing data.
- manufacturingInformation() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder
-
Returns the manufacturing stock builder that holds the manufacturing data.
- manufacturingInformation() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the manufacturing stock builder that holds the manufacturing data.
- ManufacturingOut - Interface in nxopen.features.shipdesign
-
Represents a ManufacturingOut
To create or edit an instance of this class, use
ManufacturingOutBuilder
Created in NX5.0.0
- ManufacturingOutBuilder - Interface in nxopen.features.shipdesign
-
- ManufacturingPreparation - Interface in nxopen.features.shipdesign
-
- ManufacturingPreparationBuilder - Interface in nxopen.features.shipdesign
-
This builder is used to adds attributes to the part and body identifying manufacturing related data.
- ManufacturingPreparationBuilder.AttributeType - Class in nxopen.features.shipdesign
-
Represents manufacturing attribute type.
- manufacturingStock() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the manufacturing stock.
- manufacturingStock() - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
Returns the manufacturing stock.
- manufacturingStock() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
- manufacturingStock() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the manufacturing stock builder that holds the manufacturing data.
- ManufacturingStockBuilder - Interface in nxopen.features.shipdesign
-
- ManufacturingStockBuilder.CheckBoxStatus - Class in nxopen.features.shipdesign
-
the check box status.
- ManufacturingStockBuilder.LockedStatus - Class in nxopen.features.shipdesign
-
the NX attribute locked status.
- ManufacturingStockBuilder.ObjectType - Class in nxopen.features.shipdesign
-
the object to which the manufacturing attributes will be written.
- ManufacturingStockBuilder.StockDataSourceType - Class in nxopen.features.shipdesign
-
the data source from which the intial manufacturing data will be read.
- manufacturingType() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
Returns the manufacturing type
License requirements: None.
- manufacturingYear() - Method in interface nxopen.ame.EplanSettingsBuilder
-
Returns the manufacturing year
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- MAP - Static variable in class nxopen.cae.DependentMeshBuilder.MeshType
-
Map mesh
- MAP_ALL_OBJECTS - Static variable in class nxopen.features.ReplaceFeatureBuilder.MappingMethodType
-
Not supported yet
- MAP_FROM_BASE - Static variable in class nxopen.die.HandlingCoreBuilder.Types
-
Locate by finding the minimum distance to the main profile of the target and then project and offset from the base.
- MAP_ONLY_OBJECTS_WITH_MODELING_DEPENDENCIES - Static variable in class nxopen.features.ReplaceFeatureBuilder.MappingMethodType
-
- mapAngleFromWcs(Tag, double) - Method in interface nxopen.uf.UFTurn
-
- mapAngleToWcs(Tag, double) - Method in interface nxopen.uf.UFTurn
-
- mapCenter() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the center point of the color mapping and contouring, as % of the full range of
curvature values present in the data.
- mapCollectorToDie(ScCollector) - Method in interface nxopen.die.Tip
-
Maps the edges in the collector from part position to die position.
- mapCollectorToPart(ScCollector) - Method in interface nxopen.die.Tip
-
Maps the edges in the collector from die position to part position.
- mapComponentFromParent(Component) - Method in interface nxopen.assemblies.ComponentAssembly
-
Maps a component in a parent assembly onto a corresponding component in this
assembly.
- mapComponentsFromSubassembly(Component) - Method in interface nxopen.assemblies.ComponentAssembly
-
Maps a component in a subassembly onto the corresponding components in this
parent assembly.
- mapCrossHatchTo() - Method in interface nxopen.IgesCreator
-
Returns the map cross hatch to section area or copious data
License requirements: None.
- mapData() - Method in interface nxopen.LinkedMirrorPartAttributeEditEvent
-
Returns the data object for the attribute edit callback event
License requirements: None.
- mapData() - Method in interface nxopen.LinkedMirrorPartEntityMapEvent
-
Returns the data object for the map entity callback event
License requirements: None.
- mapDrawingToModel(Tag, double[]) - Method in interface nxopen.uf.UFView
-
- mapEClassObjectToADLibraryObject() - Method in interface nxopen.ame.ManageEclassMappingBuilder
-
Map selected EClass object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- mapEClassPropertyToADLibraryObjectProperty(String, String, String) - Method in interface nxopen.ame.ManageEclassMappingBuilder
-
Map selected EClass property with AD Library Object property
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- mapEClassPropValueToADLibraryObjectPropValue(String, String, String) - Method in interface nxopen.ame.ManageEclassMappingBuilder
-
Map selected EClass property value with AD Library Object property value
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- mapEdge(IProfile) - Method in interface nxopen.die.Tip
-
Maps the edge to find the part and die position entity, either can be a null.
- MapEdgeData() - Constructor for class nxopen.die.Tip.MapEdgeData
-
- mapEntityHandler(LinkedMirrorPartEntityMapEvent) - Method in interface nxopen.LinkedPartManager.MapEntityHandler
-
User defined map entity method that is called whenever a linked mirror part is created or updated from source
License requirements: None.
- mapFaceColor() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
Returns the option for mapping color of the touched face pair from workpiece to electrode.
- mapFaceEdges() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the map face edges
License requirements: None.
- mapFeatures() - Method in interface nxopen.cam.FeatureRecognitionBuilder
-
Returns the flag indicating whether features will be mapped to other features if possible
License requirements: None.
- mapFeaturesToPoints() - Method in interface nxopen.weld.JointmarkBuilder
-
Maps the selected reuse features to the new preview point locations.
- MapFeatureTeaching - Interface in nxopen.cam
-
- mapFemToAssemblyComponent(BaseFemPart, Component, boolean) - Method in interface nxopen.cae.AssyFEModel
-
Map a fem part to an assembly component in an assembly fem.
- mapFemToMultiAssemblyComponents(BaseFemPart, Component[], boolean) - Method in interface nxopen.cae.AssyFEModel
-
Map a fem part to multiple assembly components in an assembly fem.
- mapFlattenedGeomToInputGeom(TaggedObject) - Method in interface nxopen.features.FlatSolid
-
Returns PCB component or restriction area or additional geometry for the given component or curve on flat solid.
- mapInputGeomToFlattenedGeom(TaggedObject) - Method in interface nxopen.features.FlatSolid
-
Returns output component or array of curves on flat solid for the given PCB component or restriction area or additional geometry.
- mapLdObject(NXObject, IEngObject) - Method in interface nxopen.ame.AMEManager
-
Map a LD object to an eo
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- mapLdObjectToTemplate(NXObject, NXObject) - Method in interface nxopen.ame.AMEManager
-
Map a LD object to a template
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- Maple - Interface in nxopen.features
-
- MapleBuilder - Interface in nxopen.features
-
- MapleBuilder.AssociativityEnum - Class in nxopen.features
-
Deprecated.
the associativity type
- MapleBuilder.LocationType - Class in nxopen.features
-
Deprecated.
The option to specify where the Symbolica or Maple worksheet exists.
- MapleExpBuilder - Interface in nxopen.optimization
-
- mapLinkGeomToSource(Tag, Tag, boolean) - Method in interface nxopen.uf.UFWave
-
- mapModelToDrawing(Tag, double[]) - Method in interface nxopen.uf.UFView
-
- mapObjectToCurrentPart(Tag) - Method in interface nxopen.uf.UFSf
-
- mapOutputCurve(NXObject, NXObject) - Method in interface nxopen.SketchIntersectionCurveBuilder
-
Maps old Intersection curves to new Intersection curves
This method should be used to map old Intersection curve outputs to the new Intersection curve outputs during the edit of Intersection Curve.
- MAPPED - Static variable in class nxopen.ame.LineDesignerMappingBuilder.FilterType
-
- MAPPED - Static variable in class nxopen.cae.Result.Filetype
-
- MAPPED_ANCESTORS - Static variable in class nxopen.ame.SelectAndHighlightBuilder.SelType
-
- MAPPED_HOLES - Static variable in class nxopen.cae.MeshControlBuilder.Types
-
- MAPPED_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
-
- MAPPED_TEMPERATURE_GRADIENT - Static variable in class nxopen.cae.Result.Quantity
-
- MappedHole - Interface in nxopen.cae
-
Represents a CAE mapped hole
.
- mappedHoleSize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the mapped holes size
License requirements: None.
- MappedMesh - Interface in nxopen.cae
-
Represents Mesh Recipe
To create or edit an instance of this class, use
MappedMeshBuilder
Created in NX5.0.0
- MappedMeshBuilder - Interface in nxopen.cae
-
Represents a Mapped Mesh Builder.
- MappedMeshBuilder.CornerData - Class in nxopen.cae
-
- MappedMeshBuilder.MidNodeType - Class in nxopen.cae
-
Mid-node placement options
- mappedNumberOfLayers() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the mapped number of layers
License requirements: nx_masterfem ("Finite Element Modeling")
.
- mappedOffset() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the mapped offset
License requirements: nx_masterfem ("Finite Element Modeling")
.
- MappedResult - Interface in nxopen.cae
-
Represents analysis results for a imported solver results file.
- MAPPING - Static variable in class nxopen.ame.EngineeringObjectAspectDetailBuilder.NameSource
-
- Mapping() - Constructor for class nxopen.uf.UFBrep.Mapping
-
- Mapping(int, UFBrep.GeomType, UFBrep.GeomType) - Constructor for class nxopen.uf.UFBrep.Mapping
-
- mappingCollection() - Method in interface nxopen.cae.SimLoadRecipe
-
- mappingFaces() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the faces to be used as mapping objects
License requirements: None.
- mappingFeature() - Method in interface nxopen.weld.JointmarkPointsBuilder
-
Returns the selected feature to move to the location specified.
- mappingIsRequired - Variable in class nxopen.uf.UFModlGeneral.RequireUdfMappingForEditData
-
- mappingIsRequired - Variable in class nxopen.uf.UFModlGeneral.RequireUdfMappingForInsertData
-
- mappingMethod() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Returns the mapping method
License requirements: None.
- mappingNewphysicsFileid(String, String) - Method in interface nxopen.mechatronics.ReplacePhysicsBuilder
-
- mappingNewphysicsObject(String, NXObject) - Method in interface nxopen.mechatronics.ReplacePhysicsBuilder
-
Maps new physics object according to the original file id
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- mappingNumObjects - Variable in class nxopen.uf.UFModlGeneral.RequireUdfMappingForEditData
-
- mappingNumObjects - Variable in class nxopen.uf.UFModlGeneral.RequireUdfMappingForInsertData
-
- mappingObjects - Variable in class nxopen.uf.UFModlGeneral.RequireUdfMappingForEditData
-
- mappingObjects - Variable in class nxopen.uf.UFModlGeneral.RequireUdfMappingForInsertData
-
- mappingTolerance() - Method in interface nxopen.features.ReplaceFeatureBuilder
-
Returns the distance tolerance to use for mapping
License requirements: None.
- mapPnt2FromWcs(Tag, double[]) - Method in interface nxopen.uf.UFTurn
-
- mapPnt2ToAcs(Tag, double[]) - Method in interface nxopen.uf.UFTurn
-
- mapPnt2ToWcs(Tag, double[]) - Method in interface nxopen.uf.UFTurn
-
- mapPnt3FromAcs(Tag, double[]) - Method in interface nxopen.uf.UFTurn
-
- mapPoint(int, double[], int) - Method in interface nxopen.uf.UFCsys
-
- mapPosition(double[], double[]) - Method in interface nxopen.uf.UFTrns
-
- mapRange() - Method in interface nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder
-
Returns the color map and contour range, as % of the full range of curvature values present in the data.
- mapRegionToRegionPoint(String, Point3d) - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Maps the user selected plate region to a region point.
- mapRevolvedFacesTo() - Method in interface nxopen.IgesCreator
-
Returns the Map revolved faces in NX to IGES b-surfaces/surface of revolution
License requirements: None.
- mapSectionElements(NXObject, NXObject) - Method in interface nxopen.Section
-
Maps old section curves to new section curves
This method should be used to map old section curves to new section curves when some or all curves from section are removed and
some or all new curves are added.
- mapSequence() - Method in interface nxopen.cae.ManualMorphBuilder
-
Returns the the flag which decides whether mapping is to be done sequentially (one-by-one) or in one go
License requirements: None.
- mapSourceToLinkGeom(Tag, Tag) - Method in interface nxopen.uf.UFWave
-
- mapStatus() - Method in interface nxopen.geometricutilities.ParentEquivalencyMap
-
Returns the map status
License requirements: None.
- mapSubtype() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the map subtype
License requirements: None.
- mapSubtypeMapping() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the subtype mapping
License requirements: None.
- mapTabCylToBSurf() - Method in interface nxopen.IgesCreator
-
Returns the map tabulated cylinder to b-spline surface
License requirements: None.
- mapTemplateToggle() - Method in interface nxopen.ame.MapToExistingObjectBuilder
-
Returns the toggle whether to map to template
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- MapToExistingObjectBuilder - Interface in nxopen.ame
-
- mapTooltrackingpointFromWcs(Tag, int) - Method in interface nxopen.uf.UFTurn
-
- mapTooltrackingpointToWcs(Tag, int) - Method in interface nxopen.uf.UFTurn
-
- mapTransverseFrames() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the map transverse frames
License requirements: None.
- mapType() - Method in interface nxopen.fields.SpatialMapBuilder
-
Returns the map type
License requirements: None.
- mapType() - Method in interface nxopen.geometricutilities.ParentEquivalencyMap
-
Returns the map type
License requirements: None.
- mapVec2FromWcs(Tag, double[]) - Method in interface nxopen.uf.UFTurn
-
- mapVec2ToAcs(Tag, double[]) - Method in interface nxopen.uf.UFTurn
-
- mapVec2ToWcs(Tag, double[]) - Method in interface nxopen.uf.UFTurn
-
- mapVec3FromAcs(Tag, double[]) - Method in interface nxopen.uf.UFTurn
-
- mapViewDep() - Method in interface nxopen.IgesImporter
-
Returns the map view dep - set to true if you want to map view dependent/modified entity to model object
License requirements: None.
- MAR - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- MARCHING_ANGLE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Use an initial value method and march along the varying normals at each subsequent location.
- MARCHING_CURVATURE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Use an initial value method and march along the varying normals at each subsequent location adjusting the final direction by the sheet curvature.
- margin() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the margin for user defined drawing template.
- MARGIN_OF_SAFETY - Static variable in class nxopen.cae.aerostructures.MarginResultTableDataProvider.ColumnType
-
- marginBetweenViews() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the margin between views
License requirements: None.
- marginBetweenViews() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the margin between views
License requirements: None.
- MarginCalculation - Interface in nxopen.cae.aerostructures
-
This is the MarginCalculation
.
- MarginCalculationBuilder - Interface in nxopen.cae.aerostructures
-
- MarginCalculationBuilder.CalculationStatus - Class in nxopen.cae.aerostructures
-
the Status type
- MarginCalculationCollection - Interface in nxopen.cae.aerostructures
-
- marginCalculationCollection() - Method in interface nxopen.cae.aerostructures.MarginSolution
-
- marginFirstOffset() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the distance from the baseline to the first margin.
- marginForView() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the margin for view for user defined drawing template.
- marginLineColorFontWidth() - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
Returns the color, font and width of margin line.
- marginLineColorFontWidth() - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
Returns the margin line color, font and width
License requirements: None.
- marginOfSafety() - Method in interface nxopen.cae.DurabilityEventStrengthSettingsBuilder
-
Returns the margin of safety.
- MarginResultTableDataProvider - Interface in nxopen.cae.aerostructures
-
MarginResultTableDataProvider used by the global results editor
provides a table view of the results of all of a subset of the calculation of a margin solution.
- MarginResultTableDataProvider.ColumnType - Class in nxopen.cae.aerostructures
-
Column type
- marginSafety() - Method in interface nxopen.cae.DurabilityResultsReportBuilder
-
Returns the margin safety toggle
License requirements: None.
- MarginSolution - Interface in nxopen.cae.aerostructures
-
- MarginSolutionBuilder - Interface in nxopen.cae.aerostructures
-
- marginSolutionCollection() - Method in interface nxopen.cae.AeroStructManager
-
Returns the Aerosizing metasolution collection belonging to this sim part.
- MarginSolutionCollection - Interface in nxopen.cae.aerostructures
-
Represents a collection of margin solution.
- marginSpacing() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the spacing, the distance between margins
License requirements: None.
- marginSpacing() - Method in interface nxopen.annotations.OrdinateStyleBuilder
-
Returns the interval distance between successive margins
License requirements: None.
- marginToBorder() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the margin to border
License requirements: None.
- marginToBorder() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the margin to border
License requirements: None.
- marginToCline(Tag) - Method in interface nxopen.uf.UFDrf
-
- Mark() - Constructor for class nxopen.cae.Post.Mark
-
- Mark(boolean, boolean, boolean, boolean, Post.MarkRenderStyle, Post.MarkTensorStyle, Post.MarkColor, NXColor, Post.MarkSize, Post.MarkMaximumSize, double, double, Post.MarkLocation, boolean, Post.MarkHide, double, double, boolean) - Constructor for class nxopen.cae.Post.Mark
-
Constructor for the Mark object.
- MarkAsTemplateBuilder - Interface in nxopen.drawings
-
- MarkAsTemplateBuilder.ActionTypeEnum - Class in nxopen.drawings
-
the action type enum.
- MarkAsTemplateBuilder.ItemTypeEnum - Class in nxopen.drawings
-
the item type enum.
- MarkAsTemplateBuilder.RelationTypeEnum - Class in nxopen.drawings
-
the relation type enum.
- MarkAsTemplateBuilder.TemplateTypeEnum - Class in nxopen.drawings
-
the template type enum.
- markColor - Variable in class nxopen.cae.Post.Mark
-
- MARKER - Static variable in class nxopen.cae.xyplot.ModelType
-
- MARKER - Static variable in class nxopen.cae.xyplot.TextType
-
Marker label
- MARKER - Static variable in class nxopen.mechatronics.PlcSimAdvClientBuilder.AreaType
-
Marker
- Marker - Interface in nxopen.motion
-
Represents the Motion Marker class.
- marker() - Method in interface nxopen.motion.MarkerToNodeData
-
Returns the marker or joint object
License requirements: mechanisms ("MECHANISMS")
.
- MARKER - Static variable in class nxopen.uf.UFKf.Type
-
- Marker() - Constructor for class nxopen.uf.UFMotion.Marker
-
- Marker(String, UFMotion.MarkerType, Tag, Tag, Tag, double[]) - Constructor for class nxopen.uf.UFMotion.Marker
-
- Marker.MarkerType - Class in nxopen.motion
-
Marker subtype
- MarkerBuilder - Interface in nxopen.motion
-
- MarkerCollection - Interface in nxopen.motion
-
Represents a collection of Markers
To obtain an instance of this class, refer to
Part
Created in NX4.0.0
- MarkerModel - Interface in nxopen.cae.xyplot
-
Represents a marker object on a plotting graph.
- markerPosition() - Method in interface nxopen.motion.MarkerToNodeData
-
Returns the i or j marker identity
License requirements: mechanisms ("MECHANISMS")
.
- markers() - Method in interface nxopen.Part
-
Return a collection of Markers .
- MarkerStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the marker display style.
- MarkerToNodeData - Interface in nxopen.motion
-
Represents the marker to node data which is a list item in
FlexBodyBuilder
Created in NX7.5.0
- markerType - Variable in class nxopen.uf.UFMotion.Marker
-
- MarkerType0d - Class in nxopen.cae
-
specifies the marker to use for the 0d element display
- markingHeight() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the height of marking.
- markingHeight() - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
Returns the height of the marking.
- markingHeight() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- markingHeight() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the marking height
License requirements: None.
- MarkingLine - Interface in nxopen.features.shipdesign
-
Represents a marking line feature.
- MarkingLineBuilder - Interface in nxopen.features.shipdesign
-
- markingLineColorWidth() - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder
-
Returns the color and width of marking line.
- markingLineColorWidth() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder
-
Returns the marking line color width
License requirements: None.
- MarkingLineDesign - Interface in nxopen.features.shipdesign
-
Represents a marking line feature.
- MarkingLineDesignBuilder - Interface in nxopen.features.shipdesign
-
Represents a new MarkingLine Feature builder.
- MarkingLineDesignBuilder.MarkingLineInformationData - Class in nxopen.features.shipdesign
-
- MarkingLineInformationData() - Constructor for class nxopen.features.shipdesign.MarkingLineDesignBuilder.MarkingLineInformationData
-
- markingLinesDirectionType() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the value that specifies which marking lines are drawn on the plate
License requirements: None.
- markJointsToKeep() - Method in interface nxopen.weld.WeldJointBuilder
-
- markLocation - Variable in class nxopen.cae.Post.Mark
-
- markMaximumSize - Variable in class nxopen.cae.Post.Mark
-
- markModelAsCam(Tag) - Method in interface nxopen.uf.UFCamPrepro
-
- markOnlySection() - Method in interface nxopen.features.shipdesign.ManufacturingOutBuilder
-
Returns the mark only section
License requirements: None.
- markRenderStyle - Variable in class nxopen.cae.Post.Mark
-
- markSize - Variable in class nxopen.cae.Post.Mark
-
- marksRecycled - Variable in class nxopen.Session.UndoLastNVisibleMarksData
-
True if undo succeeded but no marks remain.
- markTensorStyle - Variable in class nxopen.cae.Post.Mark
-
- MarkupFileCollection - Interface in nxopen.markup
-
- markupFileCollection() - Method in interface nxopen.markup.MarkupManager
-
- markupFileObjectCollection() - Method in interface nxopen.markup.File
-
- MarkupFileObjectCollection - Interface in nxopen.markup
-
This collects all the markups in the
File
To obtain an instance of this class, refer to
File
Created in NX10.0.0
NX_REMOVE_FROM_JAVA_API
- MarkupManager - Interface in nxopen.markup
-
Contains the collection objects for creating and iterating over markup objects.
- markupManager() - Method in interface nxopen.Session
-
Returns the
MarkupManager
instance belonging to this session
Created in NX10.0.0
NX_REMOVE_FROM_JAVA_API
- MarkupObject - Interface in nxopen.markup
-
- markupObjectCollection() - Method in interface nxopen.markup.MarkupManager
-
- MarkupObjectCollection - Interface in nxopen.markup
-
This collects all the markups in current NX session
To obtain an instance of this class, refer to
MarkupManager
Created in NX10.0.0
NX_REMOVE_FROM_JAVA_API
- MARLOW - Static variable in class nxopen.PhysicalMaterial.Type
-
Marlow
- MARRIAGE - Static variable in class nxopen.linedesigner.ConveyorStationFeatureBuilder.Type
-
- Mask() - Constructor for class nxopen.uf.UFUi.Mask
-
- Mask(int, int, int) - Constructor for class nxopen.uf.UFUi.Mask
-
- MaskTriple() - Constructor for class nxopen.Selection.MaskTriple
-
- MaskTriple(int, int, int) - Constructor for class nxopen.Selection.MaskTriple
-
Constructor for the MaskTriple object.
- mass() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the mass
License requirements: None.
- mass - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskLumpedMassData
-
Mass value.
- MASS - Static variable in class nxopen.cae.Result.Quantity
-
- MASS - Static variable in class nxopen.cae.XyFunctionMeasure
-
Mass unit
- MASS - Static variable in class nxopen.MeasureBodies.ActiveValue
-
- mass() - Method in interface nxopen.MeasureBodies
-
Returns the value for mass of the measurement
License requirements: None.
- mass() - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
Returns the mass.
- mass() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the mass of the normal mode
License requirements: mechanisms ("MECHANISMS")
.
- MASS - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
asserted mass attribute
- MASS - Static variable in class nxopen.Scalar.DimensionalityType
-
- mass - Variable in class nxopen.uf.UFMotion.LinkMassProperties
-
- MASS - Static variable in class nxopen.uf.UFSf.ElementType
-
- mass - Variable in class nxopen.uf.UFWeight.Properties
-
- MASS_BM - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass unit: lbm
- MASS_DENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- MASS_FLOW - Static variable in class nxopen.cae.Result.Quantity
-
- MASS_FLOW - Static variable in class nxopen.cae.XyFunctionMeasure
-
Mass flow
- MASS_FLOW_GHR - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Gram Per Hour
- MASS_FLOW_GMIN - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Gram Per Minute
- MASS_FLOW_GSEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Gram Per Second
- MASS_FLOW_KG_HR - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Kilogram Per Hour
- MASS_FLOW_KG_MIN - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Kilogram Per Minute
- MASS_FLOW_KG_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Kilogram Per Second
- MASS_FLOW_LBF_SEC_FT - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Pound Second Per Foot
- MASS_FLOW_LBF_SEC_IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Pound Second Per Inch
- MASS_FLOW_LBM_HR - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Pound Mass Per Hour
- MASS_FLOW_LBM_MIN - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Pound Mass Pe rMinute
- MASS_FLOW_LBM_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Pound Mass Per Second
- MASS_FLOW_MG_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Flow Unit: Megagram Per Second
- MASS_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- MASS_G - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass unit: g
- MASS_GM_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
The mass of the component in grams
- MASS_KG - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass unit: Kg
- MASS_KG_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
The mass of the component in pounds
- MASS_KGF_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass unit: kgf-sec^2/cm
- MASS_KGF_M - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass unit: kgf-sec^2/m
- MASS_KGF_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass unit: kgf-sec^2/mm (130)
- MASS_LB_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
The mass of the component in kilograms
- MASS_LBF_IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass unit: lbf-sec^2/in
- MASS_MG - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass Unit: Mg (megagrams)
- MASS_PROPERTIES - Static variable in class nxopen.GenericMeasure.Type
-
- MASS_PROPERTY_CONTROL_OUTPUT - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- MASS_SLUG - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass unit: lbf-sec^2/ft
- MASS_TON - Static variable in class nxopen.cae.XyFunctionUnit
-
Mass unit: ton
- massCenter() - Method in interface nxopen.motion.LinkMassProperty
-
Returns the mass center
License requirements: None.
- massCenter - Variable in class nxopen.uf.UFMotion.LinkMassProperties
-
- massCenterPoint() - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
Returns the mass center point.
- massDensity() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the material mass density.
- massError - Variable in class nxopen.uf.UFWeight.Properties
-
- massExpression() - Method in interface nxopen.motion.LinkMassProperty
-
Returns the mass expression
License requirements: None.
- massLimit() - Method in interface nxopen.die.SteelInsertSectionBuilder
-
Returns the mass limit of the steel insert casting
License requirements: ug_die_design ("Die Design")
.
- massMatrix0() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 0rd matrix option
License requirements: None.
- massMatrix1() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 1st matrix option
License requirements: None.
- massMatrix2() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 2nd matrix option
License requirements: None.
- massMatrix3() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 3rd matrix option
License requirements: None.
- massMatrix4() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 4th matrix option
License requirements: None.
- massPath() - Method in interface nxopen.cae.connections.ComponentData
-
Returns the mass path
License requirements: None.
- MassPropertiesBuilder - Interface in nxopen
-
Represents a
MassPropertiesBuilder
for calculating the weight of
selected objects as well as informing the part that the assemblies weight property
data needs to be updated on save.
- MassPropertiesBuilder.UpdateOptions - Class in nxopen
-
Specifies the Update on Save option that will be applied to all selected objects.
- massProperty() - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
Returns the auto-calculate mass property flag which is used to indicate whether all mass
properties are calculated by system.
- massProperty() - Method in interface nxopen.motion.LinkBuilder
-
Returns the mass property
License requirements: None.
- massPropertyType() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the mass property type
License requirements: None.
- massProps - Variable in class nxopen.uf.UFModeling.AskMassProps3dData
-
- massProps - Variable in class nxopen.uf.UFModl.AskLinkedExteriorData
-
- massProps - Variable in class nxopen.uf.UFModl.LinkedExt
-
- massScalar0() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 0rd scalar option
License requirements: None.
- massScalar1() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 1st scalar option
License requirements: None.
- massScalar2() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 2nd scalar option
License requirements: None.
- massState() - Method in interface nxopen.cae.LumpedMassEADBuilder
-
Returns the mass state drives action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- massState - Variable in class nxopen.uf.UFWeight.Properties
-
- massType() - Method in interface nxopen.motion.LinkMassProperty
-
Returns the mass type
License requirements: None.
- massUnit - Variable in class nxopen.cae.Result.ResultBasicUnit
-
- massVector0() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 0rd vector option
License requirements: None.
- massVector1() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 1st vector option
License requirements: None.
- massVector2() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 2nd vector option
License requirements: None.
- massVector3() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 3rd vector option
License requirements: None.
- massVector4() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the mass 4th vector option
License requirements: None.
- MASTER - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.RelationTypeEnum
-
- MASTER - Static variable in class nxopen.pdm.CaeCloneManager.CloneOption
-
Deprecated.
- master - Variable in class nxopen.uf.UFDrf.SymbolInstance
-
- MASTER_MODEL - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.DrawingTypes
-
- MASTER_MODEL - Static variable in class nxopen.tooling.EjectorTableBuilder.DrawingType
-
master model drawing
- MASTER_MODEL - Static variable in class nxopen.tooling.EWDraftingBuilder.DrawingOption
-
master model
- MASTER_SYMBOL - Static variable in class nxopen.annotations.SymbolPreferencesOption
-
Specifies master symbol's preferences will be used
- MASTER_SYMBOL - Static variable in class nxopen.annotations.TextPreferencesOption
-
Specifies master symbol's text preferences will be used
- masterAxisJoint() - Method in interface nxopen.mechatronics.CouplingBuilder
-
Returns the master axis joint.
- masterAxisType() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the master axis type.
- masterAxisType() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the master axis type
License requirements: None.
- masterBaseType() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the master type
License requirements: None.
- masterCadPart() - Method in interface nxopen.cae.AssyFemPart
-
Returns the master cad part associated with the assembly fem part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- masterCadPart() - Method in interface nxopen.cae.FemPart
-
Returns the master cad part associated with the fem part
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- masterComponent - Variable in class nxopen.uf.UFAssem.McArrayData
-
- MasterCustomSymbol - Interface in nxopen.annotations
-
Represents a custom symbol .
- MasterCustomSymbolData - Interface in nxopen.annotations
-
- MasterCut - Interface in nxopen.features
-
Represents a section view feature
To create or edit an instance of this class, use
MasterCutBuilder
Created in NX5.0.0
- MasterCutBuilder - Interface in nxopen.features
-
Represents a master cut feature builder that creates, inquires, or edits a master cut feature associated with a Cut View.
- MasterCutBuilder.CalcThroughLimitsData - Class in nxopen.features
-
- masterEdge() - Method in interface nxopen.cae.DependentMeshListItemBuilder
-
Returns the master edge
License requirements: nx_masterfem ("Finite Element Modeling")
.
- masterEdge() - Method in interface nxopen.cae.ManualSweepBetweenListItemSelection
-
Returns the master edge
License requirements: nx_masterfem ("Finite Element Modeling")
.
- masterEdge() - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelection
-
Returns the master edge
License requirements: nx_masterfem ("Finite Element Modeling")
.
- masterEdge() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the master edge of a T-joint weld.
- masterEdge() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the master edge of a fillet weld.
- masterExpression() - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItem
-
Returns the master expression
License requirements: None.
- masterExpression() - Method in interface nxopen.geometricutilities.PatternIncrementItem
-
Returns the master expression
License requirements: None.
- masterFace() - Method in interface nxopen.cae.DependentMeshBuilder
-
Returns the master face
License requirements: nx_masterfem ("Finite Element Modeling")
.
- masterFace() - Method in interface nxopen.cae.ManualSweepBetweenSelection
-
- masterFaceSelection() - Method in interface nxopen.cae.AutomaticSweepBetweenSelection
-
- masterFileName() - Method in interface nxopen.FileNew
-
Returns the name of the master model part to be referenced.
- masterMax - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment master max
- masterMaximum() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Returns the maximum master value
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- masterMaximum() - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
Returns the masterMax.
- masterMin - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment master min
- masterMinimum() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Returns the minimum master value
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- masterMinimum() - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
Returns the masterMin.
- masterModel - Variable in class nxopen.uf.UFPlist.TraversalSettings
-
- masterModelCncPartName() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the name to create a master model part for CNC drawing.
- masterModelEdmPartName() - Method in interface nxopen.tooling.EWDraftingBuilder
-
Returns the name to create a master model part for EDM drawing.
- masterModelPartName() - Method in interface nxopen.tooling.EjectorTableBuilder
-
Returns the name to create a master model part.
- masterMultiple() - Method in interface nxopen.mechatronics.GearBuilder
-
Returns the master multiple.
- masterOffset() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the master offset.
- masterOffset() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns an offset that specifies from the master axis zero point relative to the path
zero point for path interpolation.
- masterOffsetPath - Variable in class nxopen.routing.OffsetPathCollection.CreateCircularOffsetPathData
-
The created master offset path
- masterOffsetPath - Variable in class nxopen.routing.OffsetPathCollection.CreateRectangularOffsetPathData
-
The created master offset path
- masterOpLabel() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the master sensor label
License requirements: None.
- masterScaleFactor() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the master scale factor.
- masterScaleFactor() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the transformation that is described between the normalized representation to the absolute
values.
- MasterSymbol - Interface in nxopen.annotations
-
Represents a part symbol folder
To create or edit an instance of this class, use
MasterSymbolBuilder
Created in NX7.5.0
- MasterSymbolBuilder - Interface in nxopen.annotations
-
- MasterSymbolBuilder.LeaderAttachmentType - Class in nxopen.annotations
-
The Enum for Attachment options
- MasterSymbolListItemBuilder - Interface in nxopen.annotations
-
- MasterSymbolListItemBuilder.TextTypes - Class in nxopen.annotations
-
The Enum for Text Types
- MasterSymbolListItemBuilderList - Interface in nxopen.annotations
-
Represents a list of objects.
- masterSymbolName() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the master symbol Name.
- masterSymbolPath() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the master symbol path.
- masterType() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the master type option
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- masterUnit() - Method in interface nxopen.mechatronics.CamProfileBuilder
-
Returns the type of master joint
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- masterUnit() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the master value unit
License requirements: None.
- masterUnit() - Method in interface nxopen.mechatronics.MotionProfileBuilder
-
Returns the masterUnit.
- masterView() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the master view
License requirements: None.
- MAT1 - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum
-
- MAT2 - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum
-
- MAT3 - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum
-
- MAT8 - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum
-
- MAT9 - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum
-
- MATCH - Static variable in class nxopen.ame.ProductMatchingRulesBuilder.Condition
-
used if conditon is "Match"
- MATCH_CURVATURE - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
-
- MATCH_CURVATURE_ENDS - Static variable in class nxopen.uf.UFCurve.BridgeMethod
-
- MATCH_CURVATURE_PEAK - Static variable in class nxopen.uf.UFCurve.BridgeMethod
-
- MATCH_EDGE_TO_CURVE - Static variable in class nxopen.features.MatchEdgeBuilder.Types
-
Edge to Curve match type
- MATCH_EDGE_TO_DATUM - Static variable in class nxopen.features.MatchEdgeBuilder.Types
-
Edge to Datum match type.
- MATCH_EDGE_TO_EDGE - Static variable in class nxopen.features.MatchEdgeBuilder.Types
-
Edge to Edge match type
- MATCH_EDGE_TO_FACE - Static variable in class nxopen.features.MatchEdgeBuilder.Types
-
Edge to Face match type
- MATCH_STRING - Static variable in class nxopen.features.ThroughCurvesBuilder.PatchTypes
-
patch match string.
- MATCH_TANGENT_ENDS - Static variable in class nxopen.uf.UFCurve.BridgeMethod
-
- MATCH_TANGENT_PEAK - Static variable in class nxopen.uf.UFCurve.BridgeMethod
-
- MATCH_TANGENTS - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
-
- MATCH_TO_SHEET - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Match to sheet
- matchBy() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the match by.
- matchContinuity - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- matchCount - Variable in class nxopen.uf.UFFam.EvaluateIntentData
-
- matchCriteria(String, CharacteristicList) - Method in interface nxopen.preferences.RoutingPartLibrary
-
Search for entries in the part library table nodes that match the given set of
criteria.
- matchCriteria - Variable in class nxopen.uf.UFFam.IntentData
-
- matchCriteriaWithFilter(String, CharacteristicList) - Method in interface nxopen.preferences.RoutingPartLibrary
-
- matchCut() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the match cut.
- matchCutExtensionAngle() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the match cut extension angle dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- matchCutFirstRadius() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the match cut first radius dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- matchCutNotchOffset() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the match cut notch offset dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- matchCutOffsetFromPlane() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the match cut offset from plane dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- matchCutOffsetLength() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the match cut offset length dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- matchCutScrapCutterLength() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the match cut scrap cutter length dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- matchCutSecondRadius() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the match cut second radius dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- matchCutThirdRadius() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the match cut third radius dimension of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- matchCutType() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the match cut type of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- matchCylinderSeams() - Method in interface nxopen.cae.DependentMeshBuilder
-
Match cylinder seams
License requirements: nx_masterfem ("Finite Element Modeling")
.
- matchDimOfStartHole() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the match dim of start hole
License requirements: None.
- matchDimOfStartHole() - Method in interface nxopen.geometricutilities.MiddleHoleData
-
Returns the match dim of start hole
License requirements: None.
- matchDirVectorTag - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- MATCHED_ENDS - Static variable in class nxopen.ExtrudeTaperDataTaperType
-
Matched end taper
- MATCHED_ENDS - Static variable in class nxopen.geometricutilities.SimpleDraft.SimpleDraftType
-
Draft on both sides of the profile such that the end profiles match in areas
- matchedEntity() - Method in interface nxopen.features.MatchedReferenceBuilder
-
Returns the matched entity
License requirements: None.
- matchedExpression - Variable in class nxopen.userdefinedtemplate.InstantiationBuilder.MatchedExpressionData
-
- MatchedExpressionData() - Constructor for class nxopen.userdefinedtemplate.InstantiationBuilder.MatchedExpressionData
-
- MatchEdge - Interface in nxopen.features
-
Represents a match edge feature
To create or edit an instance of this class, use
MatchEdgeBuilder
Created in NX6.0.0
- MatchEdgeBuilder - Interface in nxopen.features
-
- MatchEdgeBuilder.EdgeConstraintType - Class in nxopen.features
-
Edge constraint type
- MatchEdgeBuilder.MatchExact - Class in nxopen.features
-
Match Exact types
- MatchEdgeBuilder.PoleMoveDirection - Class in nxopen.features
-
Pole movement direction
- MatchEdgeBuilder.PoleMovementConstraintEnumType - Class in nxopen.features
-
Pole movement type
- MatchEdgeBuilder.Types - Class in nxopen.features
-
Match Edge match types.
- matchedgeCheck(UFModl.MatchedgeData, int, int) - Method in interface nxopen.uf.UFModlFeatures
-
- matchedgeCreateFeature(UFModl.MatchedgeData) - Method in interface nxopen.uf.UFModlFeatures
-
- MatchedgeData() - Constructor for class nxopen.uf.UFModl.MatchedgeData
-
- MatchedgeData(Tag, int, int[], Tag, int, Tag[], int[], double[][], int[], int, int, int, int, Tag, int, int, int, int) - Constructor for class nxopen.uf.UFModl.MatchedgeData
-
- matchEdgeDegree - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- matchedgeEditFeature(UFModl.MatchedgeData, Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- matchEdgePatches - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- matchedReference - Variable in class nxopen.userdefinedtemplate.InstantiationBuilder.MatchedReferenceData
-
- MatchedReferenceBuilder - Interface in nxopen.features
-
- MatchedReferenceBuilder.ResolvedStatus - Class in nxopen.features
-
Matched status
- MatchedReferenceBuilder.Types - Class in nxopen.features
-
MatchedReference block type
- MatchedReferenceData() - Constructor for class nxopen.userdefinedtemplate.InstantiationBuilder.MatchedReferenceData
-
- matchedStatus() - Method in interface nxopen.features.MatchedReferenceBuilder
-
Returns the matchedReference matched status
License requirements: None.
- matchEndToEnd - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- matchEntity - Variable in class nxopen.uf.UFModl.CompareEntityMatch
-
- matchExact() - Method in interface nxopen.geometricutilities.MatchSurfaceBuilder
-
Returns the option to match exact, between the end of edit edge and the reference egde or curve
License requirements: None.
- matchExact - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- matchExactType() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the value indicating type of exact match
License requirements: None.
- matchFace() - Method in interface nxopen.facet.RemoveUndercutsBuilder
-
Returns the match tangent to face.
- matchFace() - Method in interface nxopen.features.sheetmetal.MultiFlangeBuilder
-
Returns the match face
License requirements: None.
- matchFaceOption() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Returns the match face selection type.
- matchIndices - Variable in class nxopen.uf.UFFam.EvaluateIntentData
-
- matching() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the matching.
- matchingOption() - Method in interface nxopen.features.DraftBodyBuilder
-
- matchingUpdate() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the update method for manual matchings.
- matchKnots() - Method in interface nxopen.features.StudioSplineBuilder
-
- matchKnotsType() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns a constraint to match knots at the defining points for a through point spline
License requirements: None.
- matchList() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Returns the list of all Parent Equivalency Map objects
License requirements: None.
- matchPlane() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Returns the Match Plane.
- matchPoint - Variable in class nxopen.uf.UFCurve.BridgeData
-
- matchPointOne() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the first match point for spring back calculation.
- matchPointThree() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the third match point for spring back calculation.
- matchPointTwo() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the second match point for spring back calculation.
- matchptParms - Variable in class nxopen.uf.UFCurve.BridgeData
-
- matchScope() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the match scope
License requirements: None.
- matchSheetBoundariesOnly() - Method in interface nxopen.geometricutilities.ReplAsstBuilder
-
Returns the automatic matching preference to match sheet boundaries only
License requirements: None.
- MatchSurfaceBuilder - Interface in nxopen.geometricutilities
-
- MatchSurfaceBuilder.MatchConstaint - Class in nxopen.geometricutilities
-
This enum represents the type of constaints
- matchTargetType - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- matchTolerance - Variable in class nxopen.uf.UFSf.AskMeshMatingConditionData
-
- matchType() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the match type
License requirements: None.
- matchUsing() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the match using.
- matchWith() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the comparison pattern.
- matDirection - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- MATE - Static variable in class nxopen.tooling.AddReusablePart.PositionMethod
-
- mateCsys() - Method in interface nxopen.tooling.ElectrodeComponentBuilder
-
Returns the current machine set CSYS.
- MATED_COMP_RULE - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.PairExcludedReason
-
global exclusion rule for mated component applies
- material() - Method in interface nxopen.annotations.HatchBuilder
-
- material() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the area fill material
License requirements: None.
- MATERIAL - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI material type
- material - Variable in class nxopen.BasePropertyTable.MaterialPropertyValueData
-
the material value to assign
- material() - Method in interface nxopen.cae.connections.IMaterial
-
Returns the connection material
License requirements: None.
- MATERIAL - Static variable in class nxopen.cae.connections.ModelizationResultType
-
Material
- material() - Method in interface nxopen.cae.MaterialOptions
-
Returns
License requirements: None.
- MATERIAL - Static variable in class nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder.DesignVariableTypeEnum
-
- MATERIAL - Static variable in class nxopen.cae.responsesimulation.CoordinateSystem
-
- MATERIAL - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- MATERIAL - Static variable in class nxopen.cae.XyFunctionMacroType
-
Function is only used to define a material
- material - Variable in class nxopen.DisplayManager.J3dData
-
material properties
- material() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the material
License requirements: None.
- Material - Interface in nxopen
-
Represents Material
This is an abstract class
.
- material() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the material.
- material() - Method in interface nxopen.motion.CustomizedMaterialBuilder
-
Returns the material
License requirements: mechanisms ("MECHANISMS")
.
- MATERIAL - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
material attribute
- material() - Method in interface nxopen.pid.Port
-
Returns the material of the port.
- material() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the material of the blank.
- material() - Method in interface nxopen.tooling.InitProjectBuilder
-
Returns the material access functions
License requirements: None.
- material - Variable in class nxopen.uf.UFDrf.Areafill
-
- material - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- MATERIAL_ALEXANDER - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_ANISOTROPIC - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_ARRUDABOYCE - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_ARRUDABOYCETESTDATA - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_BLATZ - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_CURING - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_DAMAGEINTERFACE - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_FLUID - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_FOAM - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_FOAMTESTDATA - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_FORMABILITY - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_GASKET - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_GASKETBEHAVIOR - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_GASKETDISPLACEMENT - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_GENT - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_HARTSMITH - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_HYPERELASTIC - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- MATERIAL_INSIDE - Static variable in class nxopen.features.sheetmetal.AdvancedFlangeBuilder.Insets
-
- MATERIAL_INSIDE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.MatType
-
Material Inside
- MATERIAL_INSIDE - Static variable in class nxopen.features.sheetmetal.BendBuilder.BendLocationOptions
-
- MATERIAL_INSIDE - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.InsetOptions
-
Bridge Transition body near tangential plane and start will be on same side of the tangential plane selected.
- MATERIAL_INSIDE - Static variable in class nxopen.features.sheetmetal.FlangeBendPropertiesBuilder.Insets
-
- MATERIAL_INSIDE - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.InsetTypeOptions
-
The flange is flush with the thickness face on the inside
- MATERIAL_INSIDE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.InsetTypeOptions
-
The hem flange is flush with the thickness face on the inside
- MATERIAL_INSIDE - Static variable in class nxopen.features.sheetmetal.JogBuilder.BendLocationOptions
-
- MATERIAL_INSIDE - Static variable in class nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder.Insets
-
- MATERIAL_ISOTROPIC - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_LIBRARY - Static variable in class nxopen.cae.DurSpecialistSolutionBuilder.MaterialSourceType
-
The material from the material library
- MATERIAL_MARLOW - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_MOONEYRIVLIN - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_MOONEYRIVLINTESTDATA - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_MULTIPLEFLUID - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_NEOHOOKE - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_NEOHOOKETESTDATA - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_OGDEN - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_OGDENTESTDATA - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_ORTHOTROPIC - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_OUTSIDE - Static variable in class nxopen.features.sheetmetal.AdvancedFlangeBuilder.Insets
-
- MATERIAL_OUTSIDE - Static variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.MatType
-
Material Outside
- MATERIAL_OUTSIDE - Static variable in class nxopen.features.sheetmetal.BendBuilder.BendLocationOptions
-
- MATERIAL_OUTSIDE - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.InsetOptions
-
Bridge Transition body near tangential plane and start will be on opposite sides of the tangential plane selected.
- MATERIAL_OUTSIDE - Static variable in class nxopen.features.sheetmetal.FlangeBendPropertiesBuilder.Insets
-
- MATERIAL_OUTSIDE - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.InsetTypeOptions
-
The flange is flush with the thickness face on the outside
- MATERIAL_OUTSIDE - Static variable in class nxopen.features.sheetmetal.HemFlangeBuilder.InsetTypeOptions
-
The hem flange is flush with the thickness face on the outside
- MATERIAL_OUTSIDE - Static variable in class nxopen.features.sheetmetal.JogBuilder.BendLocationOptions
-
- MATERIAL_OUTSIDE - Static variable in class nxopen.features.sheetmetal.MultiBendBendPropertiesBuilder.Insets
-
- MATERIAL_POLYNOMIAL - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_POROUS - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_PROPERTY_TABLE - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmClrBasis
-
Material Property Table
- MATERIAL_REDUCEDPOLYNOMIAL - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_REMOVAL_PROHIBITED - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Material Removal Prohibited
- MATERIAL_REMOVAL_PROHIBITED - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Material Removal Prohibited
- MATERIAL_REMOVAL_REQUIRED - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Material Removal Required
- MATERIAL_REMOVAL_REQUIRED - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Material Removal Required
- MATERIAL_SHAPEMEMORYALLOY - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_SIDE_IN_LEFT - Static variable in class nxopen.uf.UFCam.MaterialSide
-
- MATERIAL_SIDE_OUT_RIGHT - Static variable in class nxopen.uf.UFCam.MaterialSide
-
- MATERIAL_SIDE_UNDEFINED - Static variable in class nxopen.uf.UFCam.MaterialSide
-
- MATERIAL_SPECIFICATION - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes
-
material specification
- MATERIAL_SPECIFICATION_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType
-
- MATERIAL_SUSSMANBATHE - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_TABLE - Static variable in class nxopen.preferences.PartSheetmetal.BendDefinitionMethodOptions
-
The material table method
- MATERIAL_VANDERWAALS - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_YEOH - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MATERIAL_YEOHTESTDATA - Static variable in class nxopen.uf.UFSf.NeutralMaterialTypes
-
- MaterialAllowanceBuilder - Interface in nxopen.features.shipdesign
-
Represents the material allowance feature builder to examine steel feature.
- materialCondition() - Method in interface nxopen.annotations.DatumReferenceBuilder
-
Returns the datum reference material condition
License requirements: None.
- materialCondition - Variable in class nxopen.uf.UFGdt.DatumReference
-
- MaterialConditionModifier - Class in nxopen.annotations
-
Specifies the material condition modifier
- materialCount - Variable in class nxopen.uf.UFDisp.AskMaterialsInPartData
-
- materialCount - Variable in class nxopen.uf.UFSf.AskLibraryMaterialsData
-
- materialDamping() - Method in interface nxopen.motion.BodyContactLms
-
Returns the material damping
License requirements: None.
- materialDamping() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the material damping
License requirements: None.
- materialDamping - Variable in class nxopen.uf.UFMotion.ContactParameters
-
- materialDampingExpression() - Method in interface nxopen.motion.BodyContactAdams
-
Returns the material damping expression
License requirements: None.
- materialDampingExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the material damping expression
License requirements: None.
- materialDampingExpression() - Method in interface nxopen.motion.CurveContactAdams
-
Returns the material damping expression
License requirements: None.
- materialDampingExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the material damping expression
License requirements: None.
- MaterialData() - Constructor for class nxopen.cam.FeatureGeomBuilder.MaterialData
-
- MaterialData() - Constructor for class nxopen.cam.ToolBuilder.MaterialData
-
- materialDBDir() - Method in interface nxopen.cae.connections.ComposerData
-
Returns the material file direction
License requirements: None.
- materialDefinitionType() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
Returns the definition method of material
License requirements: nx_response_anlys ("NX Response Analysis")
.
- materialDescription() - Method in interface nxopen.cae.PostMesh
-
Returns the materail description of the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- MaterialEstimationBuilder - Interface in nxopen.features.shipdesign
-
Represents the class Features.ShipDesign.MaterialEstimationBuilder which is used to
calculate the material estimation information.
- MaterialEstimationBuilder.SelectionMethods - Class in nxopen.features.shipdesign
-
Settings to indicate how the objects are selected.
- materialFsyEstimation(double, double, double, double, double, double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Estimation of shear yield stress (Fsy)
Shear yield stress allowable ('Fsy') is estimated on the basis of the following formula:
'Fsy=( FtyL + FtyLT + FcyL + FcyLT ) / 4 * ( 2 * Fsu)/( FtuL + FtuLT )'
where:
'FtyL' is the tensile yield stress under longitudinal direction
'FtyLT' is the tensile yield stress under long transverse direction
'FcyL' is the compressive yield stress under longitudinal direction
'FcyLT' is the compressive yield stress under long transverse direction
'Fsu' is the shear ultimate stress
'FtuL' is the tensile ultimate stress under longitudinal direction
'FtuLT' is the tensile ultimate stress under long transverse direction
Input
FtyL Tensile yield stress, longitudinal direction
FtyLT Tensile yield stress, long transverse direction
FcyL Compressive yield stress, longitudinal direction
FcyLT Compressive yield stress, long transverse direction
Fsu Shear ultimate stress
FtuL Tensile ultimate stress, longitudinal direction
FtuLT Tensile ultimate stress, long transverse direction
Output
Fsy Shear yield stress
Return
Status of the calculation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- MaterialFsyEstimationData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MaterialFsyEstimationData
-
- materialFullArchiveName - Variable in class nxopen.uf.UFDisp.AskCurrentlySelectedMaterialData
-
- materialGradeName() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the material grade name.
- materialGradeOption() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the material grade option.
- materialId() - Method in interface nxopen.cae.PostMesh
-
Returns the material id of the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- materialIdColor() - Method in interface nxopen.cae.PostMesh
-
Returns the color index for the material id assigned to the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- materialInherited - Variable in class nxopen.BasePropertyTable.MaterialPropertyValueData
-
true indicate the material is inherited from referenced object assignments such as geometry
- materialInherited() - Method in interface nxopen.cae.MaterialOptions
-
Returns
License requirements: None.
- materialInterpolationOption() - Method in interface nxopen.cae.optimization.TBSTopologySensitivityOptimizationParameters
-
Returns the material interpolation scheme
License requirements: None.
- MaterialLayersInfoData() - Constructor for class nxopen.display.IrayPlusMaterialEditorBuilder.MaterialLayersInfoData
-
- materialLibrary() - Method in interface nxopen.PhysicalMaterialBuilder
-
Returns the material library value.
- materialLibrefs - Variable in class nxopen.uf.UFSf.AskLibraryMaterialsData
-
- materialManager() - Method in interface nxopen.BasePart
-
Returns the Material Manager belonging to this Part .
- MaterialManager - Interface in nxopen
-
A manager to deal with all material objects
To obtain an instance of this class, refer to
BasePart
Created in NX5.0.0
- materialMergeOption() - Method in interface nxopen.cae.SolverAppendOption
-
Returns the material merge choice
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- materialModifier() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the material modifier
License requirements: None.
- materialModifier - Variable in class nxopen.uf.UFGdt.ToleranceZone
-
- materialName() - Method in interface nxopen.cae.connections.ConnectionDBItemData
-
Returns the material name
License requirements: None.
- materialName() - Method in interface nxopen.display.CgfxMattexBuilder
-
- materialName() - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
Returns the current material name of material editor builder.
- materialName() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the material name.
- materialName() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the material name.
- materialName - Variable in class nxopen.uf.UFDisp.AskMaterialData
-
- materialNames - Variable in class nxopen.uf.UFDisp.AskMaterialsInPartData
-
- materialNames - Variable in class nxopen.uf.UFSf.AskLibraryMaterialsData
-
- materialNeeded() - Method in interface nxopen.cae.DurSpecialistSimulationObjectTable
-
- materialOption() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the material option.
- MaterialOptions - Interface in nxopen.cae
-
Represents the material options to be used when assigning a material to cae part
To create a new instance of this class, use
CaePart.newMaterialOptions()
Created in NX5.0.0
- materialOrientationState() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the material orientation state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- materialOutsideLoop() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the flag whether or not the material is outside the loop used to create the extruded body
License requirements: solid_modeling ("SOLIDS MODELING")
.
- materialOverrideOption() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
Returns the choice of override material property or not.
- MaterialPropertiesData() - Constructor for class nxopen.preferences.PartFlexiblePrintedCircuitDesign.MaterialPropertiesData
-
- MaterialPropertiesData() - Constructor for class nxopen.preferences.PartSheetmetal.MaterialPropertiesData
-
- materialPropertyDensity() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the density of material.
- materialPropertyDensity() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the density of material.
- materialPropertyE() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the material property elasticity(E) which enables a material to return to its original shape and dimension.
- materialPropertyE() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the material property elasticity(E) which enables a material to return to its original shape and dimension.
- materialPropertyF() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the friction of material.
- materialPropertyF() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the friction of material.
- materialPropertyInitialStrain() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the material initial strain to represent in a material upon achieving the given loading conditions in a relaxation or creep test.
- materialPropertyInitialStrain() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the material initial strain to represent in a material upon achieving the given loading conditions in a relaxation or creep test.
- materialPropertyK() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the K(Strength Coefficient) of material.
- materialPropertyK() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the K(Strength Coefficient) of material.
- materialPropertyN() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the material n(Hardening Exponent) to represent the constant index used in calculations for stress-strain behaviour.
- materialPropertyN() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the material n(Hardening Exponent) to represent the constant index used in calculations for stress-strain behaviour.
- materialPropertyPoisson() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the material Poisson's ratio between the contraction at right angles to a stress and the direct extension.
- materialPropertyPoisson() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the material Poisson's ratio between the contraction at right angles to a stress and the direct extension.
- materialPropertyR0() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the r0(Anisotropy Coefficient) of material.
- materialPropertyR0() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the r0(Anisotropy Coefficient) of material.
- materialPropertyR45() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the r45(Anisotropy Coefficient) of material.
- materialPropertyR45() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the r45(Anisotropy Coefficient) of material.
- materialPropertyR90() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the r90(Anisotropy Coefficient) of material.
- materialPropertyR90() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the r90(Anisotropy Coefficient) of material.
- MaterialPropertyValueData() - Constructor for class nxopen.BasePropertyTable.MaterialPropertyValueData
-
- materialPropertyYieldStress() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the yield stress of material.
- materialPropertyYieldStress() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the yield stress of material.
- materials() - Method in interface nxopen.tooling.DirectUnfoldBuilder
-
- materialSafetyFactor() - Method in interface nxopen.cae.responsesimulation.StrengthResultsEvaluationSettingBuilder
-
Returns the customized material safety factor
License requirements: nx_response_anlys ("NX Response Analysis")
.
- materialSeed - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames
-
prefix seed name for auto groups grouped by material
- materialSide() - Method in interface nxopen.cam.GeometrySet
-
Returns the material side
License requirements: None.
- materialSide() - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Returns the material side value of secondary tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- materialSide - Variable in class nxopen.uf.UFCambnd.BoundaryData
-
- materialSide - Variable in class nxopen.uf.UFPath.CircularMotion
-
- materialSide - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- materialSide - Variable in class nxopen.uf.UFSmd.AskBendLineData
-
- materialSource() - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
Returns the material source.
- materialSource() - Method in interface nxopen.cae.DurSpecialistSolutionBuilder
-
Returns the material source.
- materialSource - Variable in class nxopen.uf.UFDisp.AskCurrentlySelectedMaterialData
-
- MaterialSpecification - Interface in nxopen.annotations
-
- MaterialSpecificationBuilder - Interface in nxopen.annotations
-
- materialTag() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Returns the material.
- materialTag() - Method in interface nxopen.cae.DurabilityEventOverridesBuilder
-
Returns the material.
- materialTag() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the materialTag.
- materialTag - Variable in class nxopen.uf.UFDisp.AskCurrentlySelectedMaterialData
-
- materialTag - Variable in class nxopen.uf.UFDisp.AskMaterialData
-
- materialTags - Variable in class nxopen.uf.UFDisp.AskMaterialsInPartData
-
- materialType() - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
Returns the material type
License requirements: None.
- MaterialType - Class in nxopen.cae.connections
-
Material definition types
- materialType() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the material type - steel or aluminum
License requirements: None.
- materialType() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
Returns the insulation material type.
- materialTypeOption() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the material type.
- materialTypes() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder
-
Returns the material types
License requirements: None.
- materialTypes - Variable in class nxopen.uf.UFSf.AskLibraryMaterialsData
-
- materialTypeTag - Variable in class nxopen.uf.UFDie.AskMaterialPropertiesData
-
- materialUtil() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the material utilization.
- MaterialUtilities - Interface in nxopen
-
- MaterialUtilities.ConvertStressStrainData - Class in nxopen
-
- MaterialUtilities.ConvertStressStrainYoungsModulusData - Class in nxopen
-
- MaterialUtilities.StressStrainData - Class in nxopen
-
The stress strain data type
- materialUtilization() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the material utilization of the blank.
- materialUtils() - Method in interface nxopen.cae.CaeSession
-
- mateSetting() - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Returns the current rule setting for use during creation of mating conditions
License requirements: None.
- MATH - Static variable in class nxopen.cae.Function.Type
-
Function created by formular strings
- MATH_WORKSHEET - Static variable in class nxopen.features.EmbedManagerBuilder.UsageAreaTypes
-
Used by Symbolica and Maple applications.
- MathIntegration - Interface in nxopen.features
-
Represents a math integration feature
To create or edit an instance of this class, use
MathIntegrationBuilder
Created in NX12.0.0
- MathIntegrationBuilder - Interface in nxopen.features
-
- MathIntegrationBuilder.AssociativityTypes - Class in nxopen.features
-
the associativity
- MathIntegrationBuilder.LocationTypes - Class in nxopen.features
-
The option to specify where the Symbolica or Maple worksheet exists.
- MathIntegrationExpBuilder - Interface in nxopen.optimization
-
- MathPlotData() - Constructor for class nxopen.cae.FunctionBuilder.MathPlotData
-
- MathUtils - Interface in nxopen
-
Contains various math utility methods
To obtain an instance of this class, refer to
Session
Created in NX3.0.0
- mathUtils() - Method in interface nxopen.Session
-
Returns the
MathUtils
instance belonging to this session
Created in NX3.0.0
- MATING_IMPLICIT - Static variable in class nxopen.assemblies.PositionOverrideType
-
Position implicitly overridden because of mating conditions
- MatingConverter - Interface in nxopen.positioning
-
An instance of this class can be used to convert Mating Conditions
to Assembly Constraints in its owning assembly or in child parts
of its owning assembly.
- MatingConverter.PartContext - Class in nxopen.positioning
-
Defines in which parts mating conditions will be converted.
- MATL_IS_EDITABLE - Static variable in class nxopen.uf.UFSf.LibraryMaterial
-
- MATL_IS_READ_ONLY - Static variable in class nxopen.uf.UFSf.LibraryMaterial
-
- MATLAB - Static variable in class nxopen.mechatronics.SignalMappingBuilder.AppOption
-
- MATLAB - Static variable in class nxopen.motion.MechatronicsBuilder.MechatronicsModelType
-
- matlabClient() - Method in interface nxopen.mechatronics.ExternalSignalConfigurationBuilder
-
Returns the Matlab builder that holds the configuration for Matlab clients.
- MATLABClientBuilder - Interface in nxopen.mechatronics
-
Represents a
MATLABClientBuilder
This class is sub-object of another builder, and cannot be directly instantiated.
- MATLABClientBuilder.AvailableItemsData - Class in nxopen.mechatronics
-
- MATLABClientBuilder.DataPortType - Class in nxopen.mechatronics
-
Represents the data port type.
- MATLABClientBuilder.DataType - Class in nxopen.mechatronics
-
Represents the data type.
- MATLABClientBuilder.SignalData - Class in nxopen.mechatronics
-
Defines the signal data.
- MATLABClientBuilder.TagAttribute - Class in nxopen.mechatronics
-
the attribute of MATLAB item.
- MATLABClientBuilder.TagInfo - Class in nxopen.mechatronics
-
Represents MATLABTag info definition structure.
- matlabFileBrowser() - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
Returns the simulink file browser.
- matlabserverProgID() - Method in interface nxopen.mechatronics.MATLABClientBuilder
-
Returns the MATLAB server prog ID.
- MATLABSignalConnection - Interface in nxopen.mechatronics
-
Represents the MATLAB Signal connection class.
- MATLABSignalConnectionBuilder - Interface in nxopen.mechatronics
-
- MATLABSignalConnectionBuilder.DataType - Class in nxopen.mechatronics
-
Represents the OPC signal data type.
- MATLABSignalConnectionBuilderList - Interface in nxopen.mechatronics
-
Represents a list of objects.
- MATLABSignalConnectionCollection - Interface in nxopen.mechatronics
-
Represents a collection of Signal Connection.
- matlabsignalConnectionList() - Method in interface nxopen.mechatronics.SignalMappingBuilder
-
Returns the MATLAB Signal Connection Builder list
License requirements: None.
- matlabsignalConnections() - Method in interface nxopen.mechatronics.PhysicsManager
-
- matlabsignalName() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
Returns the MATLAB signal name.
- matlabsignalPort() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
Returns the MATLAB signal port type.
- matlabsignalType() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
Returns the MATLAB signal type.
- matLibButton() - Method in interface nxopen.tooling.InitProjBuilder
-
Pop up material library speadsheet file
License requirements: None.
- matMargin - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- matName - Variable in class nxopen.uf.UFDrf.GetXhatchParmsData
-
- matoriangle - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
Material orientation angle.
- matOrientations() - Method in interface nxopen.cae.LaminateGlobalLayupMgr
-
Collection of material orientations .
- matorimethod - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
Material orientation method.
- MATRIX - Static variable in class nxopen.BasePropertyTable.BasePropertyType
-
- MATRIX - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
BASE_PROPERTY_TABLE_property_type_matrix
- matrix - Variable in class nxopen.cae.Result.ResultCoordinateSystemDefinitionData
-
- matrix() - Method in interface nxopen.Conic
-
Returns the orientation matrix.
- matrix() - Method in interface nxopen.die.QuickBinderWrapBuilder
-
Returns the rotation matrix
License requirements: None.
- matrix - Variable in class nxopen.display.DynamicSectionBuilder.PlaneGeometryData
-
Plane matrix
- matrix() - Method in interface nxopen.features.RasterImage
-
Returns the rotation matrix of the raster image
License requirements: None.
- matrix() - Method in interface nxopen.IPlane
-
Returns the matrix of the plane
License requirements: None.
- matrix - Variable in class nxopen.uf.UFAssem.AskRefSetData
-
- matrix - Variable in class nxopen.uf.UFCambnd.BoundaryData
-
- matrix - Variable in class nxopen.uf.UFFltr.AskBoxZoneData
-
- matrix - Variable in class nxopen.uf.UFFltr.AskPlaneZoneData
-
- matrix - Variable in class nxopen.uf.UFSim.AskInitJunctionXformData
-
- matrix - Variable in class nxopen.uf.UFSim.AskJunctionXformData
-
- matrix - Variable in class nxopen.uf.UFTrns.CreateCsysMappingMatrixData
-
- matrix - Variable in class nxopen.uf.UFTrns.CreateReflectionMatrixData
-
- matrix - Variable in class nxopen.uf.UFTrns.CreateRotationMatrixData
-
- matrix - Variable in class nxopen.uf.UFTrns.CreateScalingMatrixData
-
- matrix() - Method in interface nxopen.View
-
Returns the view matrix.
- matrix - Variable in class nxopen.weld.WeldPointBuilder.CsysData
-
rotate matrix
- Matrix3x3 - Class in nxopen
-
Represents a 3 x 3 matrix .
- Matrix3x3() - Constructor for class nxopen.Matrix3x3
-
- Matrix3x3(double, double, double, double, double, double, double, double, double) - Constructor for class nxopen.Matrix3x3
-
Constructor for the Matrix3x3 object.
- matrixId - Variable in class nxopen.uf.UFCsys.AskCsysInfoData
-
- matrixTag - Variable in class nxopen.uf.UFCurve.Arc
-
- matrixTag - Variable in class nxopen.uf.UFCurve.Conic
-
- matrixTag - Variable in class nxopen.uf.UFCurve.Genconic
-
- matrixvalue - Variable in class nxopen.blockstyler.DoubleTable.MaximumValuesData
-
Value to get from the property.
- matrixvalue - Variable in class nxopen.blockstyler.IntegerTable.MaximumValuesData
-
Values to get from the property
- matrixvalue - Variable in class nxopen.blockstyler.PropertyList.DoubleMatrixData
-
Value to get for given property name.
- matrixvalue - Variable in class nxopen.blockstyler.PropertyList.IntegerMatrixData
-
Value to get for given property name.
- matrixvalue - Variable in class nxopen.PropertyContainer.DoubleMatrixData
-
Value to get for given property name.
- matrixvalue - Variable in class nxopen.PropertyContainer.IntegerMatrixData
-
Value to get for given property name.
- matThickness - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- MAX - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.EnvelopeRule
-
Keep maximum values
- MAX - Static variable in class nxopen.cae.LaminateQuickReportBuilder.EnvelopeRule
-
Keep maximum values
- MAX - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.EnvelopeRule
-
Keep maximum values
- MAX - Static variable in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
-
Maximum value fo the selection area
- MAX - Static variable in class nxopen.cae.PostAnnotationBuilder.Type
-
- max - Variable in class nxopen.cae.ResultAccess.AskMinMaxLocationData
-
- max - Variable in class nxopen.cae.ResultAccess.AskNMinMaxLocationData
-
- MAX - Static variable in class nxopen.drawings.ViewPlacementBuilder.Method
-
Should be the last enum in the list
- max() - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
Returns the maximum data range.
- MAX - Static variable in class nxopen.preferences.RoutingMechanical.LineColorType
-
- MAX - Static variable in class nxopen.routing.HealMethod
-
- max - Variable in class nxopen.uf.UFMotion.JointLimits
-
- max - Variable in class nxopen.uf.UFSim.AskAxisLimitsData
-
- MAX_ANNOTATION_YYPES - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum
-
- MAX_BONUS - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- MAX_BOUNDARY_OBJECTS - Static variable in class nxopen.uf.UFConstants
-
- MAX_CENTERLINE_OBJECTS - Static variable in class nxopen.uf.UFConstants
-
- MAX_CLEARANCE - Static variable in class nxopen.MeasureDistanceBuilder.MeasureType
-
- MAX_CLEARANCE - Static variable in class nxopen.MeasureManager.ProjectionType
-
- MAX_COLOR_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MAX_COOLING_TIME - Static variable in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
- MAX_CRYPTO_SIZE - Static variable in class nxopen.uf.UFConstants
-
- MAX_DIAMETER - Static variable in class nxopen.cam.ChamferMillingBuilder.ChamferReferenceType
-
reference to max (C-Sink) diameter
- MAX_DIST - Static variable in class nxopen.preferences.RoutingPath.ChainMethod
-
Chain with maximum path length
- MAX_DRAW_VIEWS - Static variable in class nxopen.uf.UFConstants
-
- MAX_FREQUENCY - Static variable in class nxopen.cae.Result.Quantity
-
- MAX_FSPEC_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- MAX_FSPEC_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- MAX_GOUGES - Static variable in class nxopen.cam.GougeCheckResults.Constants
-
The maximum number of gouges
- MAX_ID_SYM_TEXT_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- MAX_LEADER_INTERMEDIATE_POINTS - Static variable in class nxopen.annotations.Constants
-
The maximum number of intermediate points that a leader can have
- MAX_LEADERS - Static variable in class nxopen.annotations.Constants
-
The maximum number of leaders that an annotation can have
- MAX_LINE_BUFSIZE - Static variable in class nxopen.uf.UFConstants
-
- MAX_LINE_NCHARS - Static variable in class nxopen.uf.UFConstants
-
- MAX_MIN - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.EnvelopeRule
-
Keep minimum and maximum values
- MAX_MIN - Static variable in class nxopen.cae.LaminateQuickReportBuilder.EnvelopeRule
-
Keep minimum and maximum values
- MAX_MIN - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.EnvelopeRule
-
Keep minimum and maximum values
- MAX_MIN - Static variable in class nxopen.cae.optimization.TBSObjectives.ObjectiveType
-
Target is the MINMAX formulation of the list of design responses
- MAX_NUM_TOL - Static variable in class nxopen.uf.UFDrf.ToleranceType
-
- MAX_NUMBER - Static variable in class nxopen.display.IrayPlusMaterialEditorBuilder.LayerType
-
max layer type
- MAX_PRINCIPAL - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- MAX_PRINCIPLE - Static variable in class nxopen.cae.responsesimulation.StrengthStressCriteria
-
- MAX_PRNCPL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TensorType
-
- MAX_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- MAX_REASONS - Static variable in class nxopen.uf.UFCgm.ExportReason
-
- MAX_SHEAR - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- MAX_STRAIN - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Maximum Strain failure criteria
- MAX_STRESS - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Maximum Stress failure criteria
- MAX_TEMPERATURE - Static variable in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
- MAX_TEXT_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- MAX_TRANSVERSE_SHEAR - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Maximum Transverse Shear Stress failure criteria
- maxAcceleration() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the max acceleration, which is used to set the maximum acceleration for position control.
- maxAcceleration() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the max acceleration, which is used to set the maximum acceleration for speed control.
- maxAcceleration() - Method in interface nxopen.sim.KinematicAxisBuilder
-
Returns the max acceleration.
- maxAngle() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the upper limit of a valid trim angle
License requirements: None.
- maxAngleBetweenNormals() - Method in interface nxopen.cae.connections.ITolerance
-
Returns the maximum angle of normals with the projection surface
License requirements: None.
- maxAngleToggle() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns a value indicating whether elements are to be split based on Maximum Angle.
- maxAngleValue() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns a threshold Maximum Angle Value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- maxAngularIncr() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the max angular incr
License requirements: None.
- maxAngularIncrement() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns the max angular increment
License requirements: None.
- maxArraySize() - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
-
Returns the dynamic storage array size allocated for RS evaluations
License requirements: nx_response_anlys ("NX Response Analysis")
.
- maxBlendRadius() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the maximal radius of deleted blends, only for delete blend type
License requirements: None.
- maxBoltLength() - Method in interface nxopen.cae.connections.Bolt
-
Returns the maximum bolt length
License requirements: None.
- maxCheckingAngle() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the maximum checking angle
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- maxCheckingData - Variable in class nxopen.uf.UFModl.RefitFaceTargetData
-
- maxCheckingDist() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit face max check distance
License requirements: None.
- maxCheckingDistance() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the maximum checking distance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- maxCompensationFactor() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the maximum compensation factor.
- maxConcavityAngleBuilder() - Method in interface nxopen.cam.FlowBuilder
-
Returns the flow max concavity
License requirements: None.
- maxConstraintViolation() - Method in interface nxopen.cae.optimization.DAOStopCondition
-
Returns the maximum constraint violation
License requirements: None.
- maxCornerAngle() - Method in interface nxopen.cam.ToolAxisChange
-
Returns the maximum corner angle
License requirements: None.
- maxcornerpt - Variable in class nxopen.display.DynamicSectionBuilder.BoundingBoxData
-
- maxCorrectionAngle() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the max anlge deviation allowed for the correction
License requirements: None.
- maxCurva - Variable in class nxopen.uf.UFModeling.AskMaxCurvatureData
-
- maxCutDepthViolation() - Method in interface nxopen.cam.CutDepthChecker
-
Returns the maximum cut depth violation
License requirements: None.
- maxCutStep() - Method in interface nxopen.cam.MillCutParameters
-
Returns the maximum cut step
License requirements: None.
- MaxCutTraverse - Interface in nxopen.cam
-
- maxCutTraverse() - Method in interface nxopen.cam.MillCutParameters
-
Returns the max cut traverse
License requirements: None.
- MaxCutTraverse.Types - Class in nxopen.cam
-
Available types for max cut traverse
- maxCutWidth() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the max cut width
License requirements: None.
- maxCutWidth() - Method in interface nxopen.cam.PlungeMillingBuilder
-
Returns the max cut width distance builder (InheritableToolDepBuilder)
License requirements: None.
- maxDeceleration() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the max deceleration, which is used to set the maximum deceleration for position control.
- maxDeceleration() - Method in interface nxopen.sim.KinematicAxisBuilder
-
Returns the max deceleration.
- maxDepthBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the max. depth builder (inheritable double)
License requirements: cam_base ("CAM BASE")
Created in NX5.0.0
- maxDepthToggle() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the max. depth toggle
License requirements: None.
- maxDeviation() - Method in interface nxopen.features.LatticeBuilder
-
Returns the maximum deviation that the vertices of the lattice graph will have.
- maxDeviation - Variable in class nxopen.uf.UFModl.CompareEntityMatch
-
- maxDeviationAngle() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the angle between the normal of the fem element and the mapped element.
- maxDisplayObjects() - Method in interface nxopen.validate.Parser
-
Returns the Max entity count to display of current module
License requirements: None.
- MAXDIST_PLUS_CONST - Static variable in class nxopen.die.SteelInsertSectionBuilder.ExtensionTypeOption
-
maximum distance + constant
- MAXDIST_PLUS_CONST - Static variable in class nxopen.die.SteelInsertSegmentChildBuilder.ExtensionTypeOption
-
maximum distance + constant
- MAXDIST_PLUS_CONST - Static variable in class nxopen.die.SteelInsertSegmentParentBuilder.ExtensionTypeOption
-
maximum distance + constant
- maxDistanceToOuterMargin() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the max distance to outer margin
License requirements: None.
- maxDistCGToElemCG() - Method in interface nxopen.cae.connections.ITolerance
-
Returns the maximum distance from definition point to center of support element
License requirements: None.
- maxEdgeLength() - Method in interface nxopen.features.LatticeBuilder
-
Returns the maximum edge length used for re-meshing, to determine the redefinition size for the input triangle mesh
License requirements: None.
- maxEdgeLengthOption() - Method in interface nxopen.cae.Shell2SolidBuilder
-
Returns the max edge length toggle
License requirements: nx_masterfem ("Finite Element Modeling")
.
- maxEdgeLengthValue() - Method in interface nxopen.cae.Shell2SolidBuilder
-
Returns the max edge length value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- maxEdges() - Method in interface nxopen.facet.FillHoleBuilder
-
Returns the maximum number of edges that a targeted hole can have.
- maxError - Variable in class nxopen.uf.UFCurve.FitError
-
- maxError - Variable in class nxopen.uf.UFModlFeatures.CreateSurfFromCloudData
-
- maxErrorIndex - Variable in class nxopen.uf.UFModlFeatures.CreateSurfFromCloudData
-
- maxFacetEdges - Variable in class nxopen.uf.UFFacet.Parameters
-
- maxFacetSize - Variable in class nxopen.uf.UFFacet.Parameters
-
- maxFacingDiameterBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the max. facing diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
Created in NX5.0.0
- maxFacingDiameterToggle() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the max. facing diameter toggle
License requirements: None.
- maxFrictionForceExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the max friction force expression
License requirements: None.
- maxFrictionTorqueExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the max friction torque expression
License requirements: None.
- maxGapDist() - Method in interface nxopen.cam.LaserProfileMove
-
Returns the Max Gap Distance
License requirements: None.
- maxHeight - Variable in class nxopen.uf.UFTabnot.SectionPrefs
-
- maxHoleDiaExpression - Variable in class nxopen.uf.UFModl.SimplData
-
- maxHoleDiameter() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the maximal diameter of deleted holes, only for delete hole type and only working when use_hole_diameter is true,
don't use it until nx502
License requirements: None.
- maxid - Variable in class nxopen.cae.ResultAccess.AskMinMaxLocationData
-
- maxid - Variable in class nxopen.cae.ResultAccess.AskNMinMaxLocationData
-
- MAXIMUM - Static variable in class nxopen.cae.AxiSymmetricParameters.EnvVal
-
- MAXIMUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.EnvelopeValue
-
- MAXIMUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.Value
-
- MAXIMUM - Static variable in class nxopen.cae.optimization.Goal
-
Maximum value
- MAXIMUM - Static variable in class nxopen.cae.optimization.Hookes
-
Deprecated.
Maximum
- MAXIMUM - Static variable in class nxopen.cae.optimization.TBSLoadCase.LayerOption
-
the maximum value among Top, Middle and Bottom
- MAXIMUM - Static variable in class nxopen.cae.optimization.TBSLoadCaseManager.SelectionType
-
Maximum value of the selected load cases
- MAXIMUM - Static variable in class nxopen.cae.optimization.TBSObjectives.ObjectiveType
-
Target is to maximize the list of design response
- MAXIMUM - Static variable in class nxopen.cae.Post.NodeValueSharingCriterion
-
- MAXIMUM - Static variable in class nxopen.cae.Post.ValueSharingCriterion
-
- MAXIMUM - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
-
- MAXIMUM - Static variable in class nxopen.cae.PostGraphBuilder.GeometryValue
-
- MAXIMUM - Static variable in class nxopen.cae.PostGraphBuilder.NodalCombination
-
- MAXIMUM - Static variable in class nxopen.cae.Result.ComputationType
-
maximum value at the node
- MAXIMUM - Static variable in class nxopen.cae.Result.ElementValueCriterion
-
- MAXIMUM - Static variable in class nxopen.cae.Result.Section
-
- MAXIMUM - Static variable in class nxopen.cae.ResultMeasure.Operation
-
Evaluate for the maximum value
- MAXIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
-
- MAXIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
-
- MAXIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.GeometryValue
-
- MAXIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.NodalCombination
-
- MAXIMUM - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.Operation
-
- MAXIMUM - Static variable in class nxopen.cae.ResultsManipulationBuilder.ElementValueAtNode
-
- MAXIMUM - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
-
- MAXIMUM - Static variable in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
-
- maximum() - Method in interface nxopen.cam.ContourAngle
-
Returns the maximum face angle
License requirements: None.
- MAXIMUM - Static variable in class nxopen.cam.DmRadBuilder.RadStepoverTypeType
-
Maximum
- MAXIMUM - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Finds the minimum feature measurement point in a specified direction
- MAXIMUM - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Maximum Stepover
- MAXIMUM - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
-
- MAXIMUM - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MinMaxType
-
Maximum
- MAXIMUM - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
Maximum
- MAXIMUM - Static variable in class nxopen.geometricanalysis.RadiusAnalysisBuilder.Types
-
Maximum radius.
- MAXIMUM - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.LabelTypes
-
Maximum
- MAXIMUM - Static variable in class nxopen.MeasureDistanceBuilder.MeasureType
-
- MAXIMUM - Static variable in class nxopen.MeasureManager.MeasureType
-
- MAXIMUM - Static variable in class nxopen.MeasureManager.ProjectionType
-
- MAXIMUM - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationTargetType
-
Target is maximum value of design objective
- MAXIMUM_ABSOLUTE_PRINCIPAL_STRESS - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Maximum of absolute value of the principal stress
- MAXIMUM_ANGLE - Static variable in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
-
show maximum
angle deviation
- MAXIMUM_ANGLE - Static variable in class nxopen.Measurement.DeviationReportType
-
Maximum Angle
- MAXIMUM_ANGLES - Static variable in class nxopen.formboard.FormboardLayoutBuilder.BranchAngle
-
Apply the largest possible angle values
at every branch to force the harness
to spread out.
- MAXIMUM_BEND_TYPES - Static variable in class nxopen.routing.OffsetPathCollection.BendType
-
- MAXIMUM_CURVATURE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Use an initial value method and march along the maximum curvature at each subsequent location.
- MAXIMUM_DAMAGE - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.StressAxisDirectionSearchMethodEnum
-
Maximum Damage
- MAXIMUM_DISTANCE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeMethodType
-
Represents using the maximum distance
- MAXIMUM_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
-
- MAXIMUM_DISTANCE - Static variable in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
-
show
maximum distance deviation
- MAXIMUM_DISTANCE - Static variable in class nxopen.Measurement.DeviationReportType
-
Maximum Distance
- MAXIMUM_INPLANE_STRESS - Static variable in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StressTypeName
-
Display maximum in-plane stress.
- MAXIMUM_MAGNITUDE - Static variable in class nxopen.cae.AfuMathOperation.Overall
-
Gets maximum magnitude values of AFU records
- MAXIMUM_MATERIAL_CONDITION - Static variable in class nxopen.annotations.DatumReferenceBuilder.DatumReferenceMaterialCondition
-
maximum material condition
- MAXIMUM_MATERIAL_CONDITION - Static variable in class nxopen.annotations.FeatureControlFrameDataBuilder.ToleranceMaterialModifier
-
maximum material condition
- MAXIMUM_MATERIAL_CONDITION - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumDualMCMOptions
-
maximum material condition
- MAXIMUM_MATERIAL_CONDITION - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.PrimaryDatumMCMOptions
-
maximum material condition
- MAXIMUM_MATERIAL_CONDITION - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumDualMCMOptions
-
maximum material condition
- MAXIMUM_MATERIAL_CONDITION - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.SecondaryDatumMCMOptions
-
maximum material condition
- MAXIMUM_MATERIAL_CONDITION - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumDualMCMOptions
-
maximum material condition
- MAXIMUM_MATERIAL_CONDITION - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TertiaryDatumMCMOptions
-
maximum material condition
- MAXIMUM_MATERIAL_CONDITION - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ToleranceMCMOptions
-
maximum material condition
- MAXIMUM_NUMBER - Static variable in class nxopen.cae.WeldBuilder.NumberOfPointsOnEdgeType
-
Create the maximum number of points on an edge
- MAXIMUM_ONLY - Static variable in class nxopen.cae.Post.Marker
-
- MAXIMUM_PRINCIPAL - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressTypeEnum
-
Maximum Principal
- MAXIMUM_PRINCIPAL - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.CriticalPlaneOptionEnum
-
Maximum Principal
- MAXIMUM_PRINCIPAL - Static variable in class nxopen.cae.Result.Component
-
- MAXIMUM_PRINCIPAL_STRESS - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Maximum principal Stress
- MAXIMUM_PRINCIPLE - Static variable in class nxopen.uf.UFSf.DursolStressType
-
- MAXIMUM_SHEAR - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.CriticalPlaneOptionEnum
-
Maximum Shear
- MAXIMUM_SHEAR - Static variable in class nxopen.cae.Result.Component
-
- MAXIMUM_SMART_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
-
- MAXIMUM_STRESS - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum
-
- MAXIMUM_STRESS - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum
-
Maximum Stress
- MAXIMUM_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
-
- MAXIMUM_TEMPERATURE_ERROR - Static variable in class nxopen.cae.Result.Quantity
-
- MAXIMUM_VALUE - Static variable in class nxopen.cae.AfuMathOperation.Overall
-
Gets maximum values of AFU records
- MAXIMUM_VALUE - Static variable in class nxopen.cae.xyplot.AnchorType
-
the position of the point which has maximum value in a record display
- maximumAlternatingStress() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the maximum alternating stress.
- maximumAlternatingStressKeyin() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the maximum alternating stress keyin.
- maximumAngle() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Maximum Angle
License requirements: None.
- maximumAngle() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Returns the maximum angle
License requirements: None.
- maximumAreaMode() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Maximum Area mode
License requirements: None.
- maximumAreaSize() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Maximum Area Size
License requirements: None.
- maximumAreaUnit() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Maximum Area Unit
License requirements: None.
- maximumAverage() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the variable average maximum value
License requirements: None.
- maximumAverageBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the variable average maximum builder
License requirements: None.
- maximumAverageOnlyBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the variable average maximum only builder
License requirements: None.
- maximumBendRadius() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the bend radius of a flange.
- maximumBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the maximum builder
License requirements: None.
- maximumCenterlineWidth() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the maximum centerline width.
- maximumCharacterCount() - Method in interface nxopen.cae.xyplot.AxisItemStyle
-
Returns the maximum character count.
- maximumCharactersAccepted() - Method in interface nxopen.blockstyler.MultilineString
-
Returns the MaximumCharactersAccepted
License requirements: None.
- maximumCheckingDistance() - Method in interface nxopen.facet.MultiPatchAlignmentBuilder
-
Returns the distance facets may be from one another in order to be used
in the alignment.
- maximumCornerAngle() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the maximum corner angle.
- maximumDegree() - Method in interface nxopen.features.BridgeCurveBuilder
-
- maximumDegree() - Method in interface nxopen.features.JoinCurvesBuilder
-
Returns the maximum degree of the advanced spline output.
- maximumDegree() - Method in interface nxopen.geometricutilities.CurveFitData
-
Returns the maximum degree
License requirements: None.
- maximumDegree() - Method in interface nxopen.geometricutilities.CurveFitOptions
-
Returns the maximum degree method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- maximumDegree() - Method in interface nxopen.geometricutilities.Rebuild
-
Returns the maximum degree when rebuild type is advanced.
- maximumDegree - Variable in class nxopen.uf.UFModl.CurveFitData
-
- maximumDepthPerCut() - Method in interface nxopen.cam.DPMTubeBuilder
-
Returns the maximum depth per cut builder
License requirements: None.
- maximumDeviation() - Method in interface nxopen.facet.FacetBodyFromBodyBuilder
-
Returns the maximum deviation
License requirements: None.
- maximumDeviation() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Returns the maximum deviation
License requirements: None.
- maximumDisplacement() - Method in interface nxopen.cae.optimization.TBSTestFunction
-
Returns the maximum value of test displacements
License requirements: None.
- maximumDistanceToGeometry() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the maximum distance to geometry
License requirements: None.
- maximumDistanceTolerance1() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the maximum distance tolerance1
License requirements: None.
- maximumDistanceTolerance2() - Method in interface nxopen.cae.connections.ConnectionData
-
Returns the maximum distance tolerance2
License requirements: None.
- maximumDY() - Method in interface nxopen.Hyperbola
-
Returns the maximum DY width.
- maximumDY() - Method in interface nxopen.Parabola
-
Returns the maximum DY width.
- maximumElementSize() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Returns the maximum element size
License requirements: None.
- maximumExcludedObjects() - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Returns the maximum excluded objects during partial offset.
- maximumExtensionDistance() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the maximum distance edges will be extended to completion.
- maximumFaceGap() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the maximum face gap used when determining if two bodies intersect.
- maximumFacetEdges - Variable in class nxopen.facet.FacetingParameters
-
The maximum number of edges allowed
in the facets that are to be generated
(this does not apply to JT).
- maximumFacetLength - Variable in class nxopen.uf.UFMotion.StlParameters
-
- maximumFacetSize - Variable in class nxopen.facet.FacetingParameters
-
This is the maximum width of a facet.
- maximumGap() - Method in interface nxopen.die.CompensateRoughDataBuilder
-
Returns the maximum gap.
- maximumGapToGeometry() - Method in interface nxopen.drafting.AutomationRuleBuilder
-
Returns the maximum gap from the view geometry to the annotation
License requirements: None.
- maximumGrowValue() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns the maximum grow value
License requirements: None.
- maximumHeight() - Method in interface nxopen.annotations.TableSectionStyleBuilder
-
Returns the value that represents the maximum height of the section
License requirements: None.
- maximumHeight() - Method in interface nxopen.blockstyler.ListBox
-
Returns the MaximumHeight
License requirements: None.
- maximumHeight() - Method in interface nxopen.blockstyler.MultilineString
-
Returns the MaximumHeight
License requirements: None.
- maximumHeight() - Method in interface nxopen.blockstyler.SetList
-
Returns the MaximumHeight
License requirements: None.
- maximumHeight() - Method in interface nxopen.blockstyler.Tree
-
Returns the MaximumHeight
License requirements: None.
- maximumIterationNumber() - Method in interface nxopen.cae.optimization.TBSStopCondition
-
Returns the maximum number of iteration during the optimization
License requirements: None.
- maximumLeadAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Maximum the Lead Angle
License requirements: None.
- maximumLeadAngleType() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Maximum Lead Angle type
License requirements: None.
- maximumLegendItemCount() - Method in interface nxopen.cae.xyplot.LegendTableStyle
-
Returns the maximum displayable functions count on legend table page
License requirements: None.
- maximumLegendsInGraph() - Method in interface nxopen.cae.xyplot.Preference
-
- maximumLength() - Method in interface nxopen.features.vehicledesign.CloseRangeBlindVolumeListItemBuilder
-
Returns the maximum length calculated from the rear end wheel of the cylinder located to the blind volume area.
- maximumLevel() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Maximum Level
License requirements: None.
- maximumLoopAngle() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the maximum loop angle
License requirements: None.
- maximumLoopAngle() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the maximum loop angle
License requirements: None.
- maximumMagnitude() - Method in interface nxopen.mechatronics.BreakingConstraintBuilder
-
Returns the maximum allowable magnitude, the joint will be broken if it exceeds this value.
- maximumMidnodeJacobian - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- maximumMidnodeJacobian - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- maximumNumberOfAttributeGroupsAllowed() - Method in interface nxopen.pdm.AttributeGroupDescription
-
Returns the maximum number of attribute groups of this type that can be assigned to an object.
- maximumNumberOfFacesSearched() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Returns the maximum number of faces to be searched
License requirements: None.
- maximumoffset - Variable in class nxopen.display.DynamicSectionBuilder.OffsetLimitsData
-
Minimum offset
- maximumPathLength() - Method in interface nxopen.routing.electrical.Connection
-
Returns the maximum path length for this connection.
- maximumPercentBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the maximum percent of remaining
License requirements: None.
- maximumPosition() - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
-
Returns the maximum position:
The maximum allowable angle, stops objects moving beyond this degree.
- maximumPosition() - Method in interface nxopen.mechatronics.LinearLimitJointBuilder
-
Returns the maximum position.
- maximumPositive() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the maximum positive trim angle.
- maximumPrincipalAngle() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the maximumPrincipalAngle.
- maximumPrincipalStrain() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the maximumPrincipalStrain.
- maximumPrincipalStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the maxPrinStress.
- maximumQuadWarp - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- maximumRadius() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the maximum radius
License requirements: None.
- maximumRadius() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the maximum radius
License requirements: None.
- maximumRadius() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Maximum Radius
License requirements: None.
- maximumRadiusMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the maximum radius mode
License requirements: None.
- maximumRadiusMode() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the maximum radius mode
License requirements: None.
- maximumRadiusPoint() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the maximum radius point
License requirements: None.
- maximumRandomAngle() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the maximum random angle.
- maximumRecentReportDocumentCount() - Method in interface nxopen.report.ReportPreference
-
Returns the maximum count of the recent report documents which could be viewed
License requirements: None.
- maximumRibLength() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the maximum rib length to be recognized
License requirements: None.
- maximumRibThickness() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the maximum rib thickness to be recognized
License requirements: None.
- MAXIMUMS_SIZE - Static variable in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
-
Defition of the maximum structural diameter
- maximumScopeAsString() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the MaximumScope
License requirements: None.
- maximumScopeAsString() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the MaximumScope
License requirements: None.
- maximumScopeAsString() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the MaximumScope
License requirements: None.
- maximumScopeAsString() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the MaximumScope as string
License requirements: None.
- maximumSegment() - Method in interface nxopen.features.BridgeCurveBuilder
-
- maximumSegments() - Method in interface nxopen.features.JoinCurvesBuilder
-
Returns the maximum number of segments of the advanced spline output.
- maximumSegments() - Method in interface nxopen.geometricutilities.CurveFitData
-
Returns the maximum segments
License requirements: None.
- maximumSegments() - Method in interface nxopen.geometricutilities.CurveFitOptions
-
Returns the maximum segments method
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.
- maximumSegments() - Method in interface nxopen.geometricutilities.Rebuild
-
Returns the maximum segments when rebuild type is advanced.
- maximumSegments - Variable in class nxopen.uf.UFModl.CurveFitData
-
- maximumShearStrain() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the maximumShearStrain.
- maximumShearStress() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the maximumShearStress.
- maximumShrinkValue() - Method in interface nxopen.cae.optimization.TBSShapeRestrictAreaBuilder
-
Returns the maximum shrink value
License requirements: None.
- maximumSingleThickness() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the maximum single metal thinkness for all the selected components.
- maximumSize() - Method in interface nxopen.diagramming.tables.ContinuationDataBuilder
-
Returns the maximum size of any section of a table.
- maximumSizeAxial() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Maximum Size Axial
License requirements: None.
- maximumSizeMode() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Maximum Size Mode
License requirements: None.
- maximumSizeRadial() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Maximum Size Radial
License requirements: None.
- maximumSolutions() - Method in interface nxopen.preferences.RoutingPart
-
Returns the maximum number of placement solutions to generate when determining
placement solutions for a component.
- maximumSpacing() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the maximum spacing
License requirements: None.
- maximumSpacing() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the maximum spacing between the trim edge offset and the back edge offset.
- maximumSpacingBetweenPoints() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the maximum spacing between points
License requirements: None.
- maximumStepover() - Method in interface nxopen.cam.DPMTubeBuilder
-
Returns the maximum stepover builder
License requirements: None.
- maximumStepSize - Variable in class nxopen.cae.Post.StreamlineExtraction
-
- maximumStepSizeFactorExpression() - Method in interface nxopen.motion.BodyContactRecurdyn
-
Returns the Maximun Step Size Factor expression
License requirements: None.
- maximumStepSizeFactorExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the Maximun Step Size Factor expression
License requirements: None.
- maximumStringLength() - Method in interface nxopen.blockstyler.ListBox
-
Returns the MaximumStringLength
License requirements: None.
- maximumSubGraphsInStack() - Method in interface nxopen.cae.xyplot.Preference
-
Returns the maximum sub-graph count in a stacked graph
License requirements: None.
- maximumText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the maximum value
License requirements: None.
- maximumTextCount() - Method in interface nxopen.cae.xyplot.VectorStyle2DSetting
-
Returns the maximum of customized text count
License requirements: None.
- maximumTextType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the maximum text enum
License requirements: None.
- maximumTextureSize() - Method in interface nxopen.features.RasterImage
-
Returns the enum value for the maximum size of the image, in pixels
License requirements: None.
- maximumTiltAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Maximum Tilt Angle
License requirements: None.
- maximumTimeElapsed - Variable in class nxopen.cae.Post.StreamlineExtraction
-
- maximumTolerance() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the maximum tolerance toggle
License requirements: None.
- maximumToleranceValue() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
- maximumValue() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the MaximumValue
License requirements: None.
- maximumValue() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the MaximumValue
License requirements: None.
- maximumValue() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the MaximumValue
License requirements: None.
- maximumValue() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the MaximumValue
License requirements: None.
- maximumValue() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the MaximumValue
License requirements: None.
- maximumValue() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the MaximumValue
License requirements: None.
- maximumValue() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the MaximumValue
License requirements: None.
- maximumValue - Variable in class nxopen.fields.FieldVariable.Bounds
-
maximum bound value
- maximumValue() - Method in interface nxopen.report.DoubleArgument
-
Returns the maximum value.
- maximumValue() - Method in interface nxopen.report.IntegerArgument
-
Returns the maximum value.
- MaximumValuesData() - Constructor for class nxopen.blockstyler.DoubleTable.MaximumValuesData
-
- MaximumValuesData() - Constructor for class nxopen.blockstyler.IntegerTable.MaximumValuesData
-
- maximumVelocity() - Method in interface nxopen.sim.KinematicAxisBuilder
-
Returns the maximum velocity
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- maximumWallThickness() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the maximum wall thickness
License requirements: None.
- maximumWidth() - Method in interface nxopen.blockstyler.Tree
-
Returns the MaximumWidth
License requirements: None.
- maxIncludedAngleQuadToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- maxIncludedAngleQuadValue - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- maxIncludedAngleTriaToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- maxIncludedAngleTriaValue - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- maxInclusive() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the MaxInclusive
License requirements: None.
- maxInclusive() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the MaxInclusive
License requirements: None.
- maxInclusive() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the MaxInclusive
License requirements: None.
- maxInclusive() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the MaxInclusive
License requirements: None.
- maxInclusive() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the MaxInclusive
License requirements: None.
- maxInclusive() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the MaxInclusive
License requirements: None.
- maxInclusive() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the MaxInclusive
License requirements: None.
- maxInteger() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the max integer.
- maxIntegrationSteps - Variable in class nxopen.cae.Post.StreamlineExtraction
-
- maxIntegratorIterations - Variable in class nxopen.uf.UFMotion.SolverParameters
-
- maxIteration() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- maxIteration() - Method in interface nxopen.motion.AdamsSolverProperty
-
Returns the max iteration
License requirements: None.
- maxIterationExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Maximum Iteration Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- maxIterations() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
Returns the maximum iterations
License requirements: None.
- maxIterations() - Method in interface nxopen.cae.optimization.DAOStopCondition
-
Returns the maximum iteration number
License requirements: None.
- maxJerk() - Method in interface nxopen.mechatronics.PositionControlBuilder
-
Returns the max jerk, which is used to set the maximum jerk for position control.
- maxJerk() - Method in interface nxopen.mechatronics.SpeedControlBuilder
-
Returns the max jerk, which is used to set the maximum jerk for speed control.
- maxKinematicIteration() - Method in interface nxopen.motion.AdamsSolverProperty
-
Returns the max kinematic iteration
License requirements: None.
- maxKinematicsIterations - Variable in class nxopen.uf.UFMotion.SolverParameters
-
- maxLength() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the max length in substring comparison.
- maxLength - Variable in class nxopen.uf.UFCurve.AnalysisDisplay
-
- maxLengthIncr() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the max length incr
License requirements: None.
- maxLengthIncrement() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns the max length increment
License requirements: None.
- maxLengthStep() - Method in interface nxopen.cae.connections.ILineDiscretization
-
Returns the line Discretization max length step
License requirements: None.
- maxLineThickness() - Method in interface nxopen.IgesCreator
-
Returns the max line thickness - maximum line thickness in resulting iges file
License requirements: None.
- maxLineThickness() - Method in interface nxopen.NXTo2dCreator
-
Returns the max line thickness - maximum line thickness in resulting iges file
License requirements: None.
- maxMaintainTiltDistance() - Method in interface nxopen.cam.ToolPathTiltAvoidance
-
Returns the max maintain tilt distance
License requirements: None.
- maxMaintainTiltDistance() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- maxMeanRange() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Returns the max mean range
License requirements: None.
- maxminBox - Variable in class nxopen.uf.UFBound.AllData
-
- maxMinDisplay - Variable in class nxopen.uf.UFPatt.AskParamsData
-
- maxNeedleLength() - Method in interface nxopen.geometricutilities.CombOptionsBuilder
-
Returns the maximum needle length
License requirements: None.
- maxNominalRange() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Returns the max nominal range
License requirements: None.
- maxNormalDistCGToFlanges() - Method in interface nxopen.cae.connections.ITolerance
-
Returns the maximum normal distance from definition point to center of element
License requirements: None.
- maxNumber() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the max number.
- maxNumberIteration() - Method in interface nxopen.optimization.OptimizationBuilder
-
Returns the maximum number of updates allowed without converging to a solutionthe maximum iterations time
License requirements: None.
- maxNumberOfCurves() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the maximum number of curves to generate on the profile.
- maxNumContactPoints - Variable in class nxopen.uf.UFMotion.Motion2DContact
-
- maxParamId() - Method in interface nxopen.mechatronics.ProxyObjectBuilder
-
Returns the maximum parameter id used in the proxy object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- maxPenetrationDepth() - Method in interface nxopen.motion.BodyContactLms
-
Returns the max penetration depth
License requirements: None.
- maxPenetrationDepth() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the max penetration depth
License requirements: None.
- maxpoint - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
the points on the interference region at the extremes of depth
- maxPower() - Method in interface nxopen.cam.LaserTool
-
Returns the Maximum Power
License requirements: None.
- maxradius - Variable in class nxopen.features.ConcaveFacesBuilder.CalculatePointCurvatureData
-
the maximum value of targeted face
- maxRampLength() - Method in interface nxopen.cam.MultiRamp
-
Returns the maximum ramp length
License requirements: None.
- maxRatioLongFacets() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the specified value used to define long facets
License requirements: None.
- maxrpm - Variable in class nxopen.uf.UFPath.SpindleOn
-
- maxrpmFlag - Variable in class nxopen.uf.UFPath.SpindleOn
-
- maxSamplePts - Variable in class nxopen.uf.UFModl.GflangeOptionsData
-
- maxSignalId() - Method in interface nxopen.mechatronics.SignalAdapterBuilder
-
Returns the maximum signal id.
- maxSolverError - Variable in class nxopen.uf.UFMotion.SolverParameters
-
- maxSolverErrorExpression() - Method in interface nxopen.motion.AdamsSolverProperty
-
Returns the max solver error expression
License requirements: None.
- maxSpacing() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the maximum spacing between scan points
License requirements: None.
- maxSpacing() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the Maximum Spacing of points along the Scan Curve
License requirements: None.
- maxSpacing() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the Maximum Spacing of points along the Scan Curve
License requirements: None.
- maxStaticIteration() - Method in interface nxopen.motion.AdamsSolverProperty
-
Returns the max static iteration
License requirements: None.
- maxStaticsIterations - Variable in class nxopen.uf.UFMotion.SolverParameters
-
- maxStepoverDistance() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the max stepover distance builder
License requirements: None.
- maxStepSize - Variable in class nxopen.uf.UFMotion.SolverParameters
-
- maxStepSizeExpression() - Method in interface nxopen.motion.AdamsSolverProperty
-
Returns the max step size expression
License requirements: None.
- maxStictionDeformationExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the max stiction deformation expression
License requirements: None.
- maxStictionDeformationExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the max stiction deformation expression
License requirements: None.
- maxString() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the max string.
- maxSubdivisionType() - Method in interface nxopen.cae.FluidDomainBuilder
-
- maxsubid - Variable in class nxopen.cae.ResultAccess.AskMinMaxLocationData
-
- maxsubid - Variable in class nxopen.cae.ResultAccess.AskNMinMaxLocationData
-
- maxSystem3DModelSpace() - Method in interface nxopen.NXTo2dCreator
-
Returns the sys defmaxThreeDmdl space - if set to true then system defined maximum 3D model
space will be used
License requirements: None.
- maxSystemPointRes() - Method in interface nxopen.NXTo2dCreator
-
Returns the sys defidentical point resolution - if set to true then system defined tolerance will be
used to find identical points
License requirements: None.
- maxTesselationLength() - Method in interface nxopen.motion.AnalyticalContactBuilder
-
Returns the max tesselation length
License requirements: mechanisms ("MECHANISMS")
.
- maxTextLength() - Method in interface nxopen.blockstyler.StringBlock
-
Returns the MaxTextLength
License requirements: None.
- maxThickness() - Method in interface nxopen.features.MidSurfaceUserDefinedBuilder
-
Returns the max thickness allowed during Fem solve
License requirements: None.
- maxThreeDMdlSpace() - Method in interface nxopen.IgesCreator
-
Returns the maxThree dmdl space - if not using system defined maximum 3D model space then specifiy
the new value
License requirements: None.
- maxTiltAngle() - Method in interface nxopen.cam.LaserProfileMove
-
Returns the Max Tilt Angle
License requirements: None.
- maxTiltAngle() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- maxTiltAngle() - Method in interface nxopen.cam.ToolPathTiltMachine
-
Returns the maximum tilt angle
License requirements: None.
- maxTime() - Method in interface nxopen.optimization.OptimizationBuilder
-
Returns the maximum time allowed for this run in seconds
License requirements: None.
- maxTimeIncr() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the max time incr
License requirements: None.
- maxToggle() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the max toggle
License requirements: None.
- maxToolAxisChange() - Method in interface nxopen.cam.NcmScBuilder
-
- maxToolAxisChange() - Method in interface nxopen.cam.NcmTransfer
-
Returns the max tool axis change
License requirements: None.
- maxToolAxisChange() - Method in interface nxopen.cam.ToolAxisChange
-
Returns the maximum tool axis change
License requirements: None.
- maxToolAxisChange() - Method in interface nxopen.cam.ToolPathTiltMachine
-
Returns the tool axis change
License requirements: None.
- maxToolReachBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the max. tool reach builder (inheritable double)
License requirements: cam_base ("CAM BASE")
Created in NX5.0.0
- maxToolReachToggle() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the max. tool reach toggle
License requirements: None.
- maxUser3DModelSpace() - Method in interface nxopen.NXTo2dCreator
-
Returns the maxThree dmdl space - if not using system defined maximum 3D model space then specifiy
the new value
License requirements: None.
- maxUserPointRes() - Method in interface nxopen.NXTo2dCreator
-
Returns the identical point resolution - if not using system defined tolerance for identical points then
specify new value
License requirements: None.
- maxValue() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the max value
License requirements: None.
- maxValue - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- maxWallHeight() - Method in interface nxopen.cam.ToolAxisTilt
-
Returns the maximum wall height
License requirements: None.
- maxWarpToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- maxWeight - Variable in class nxopen.uf.UFWeight.AskPartMaxWeightData
-
- maxWidthBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract max width builder (inheritable tool dep)
License requirements: None.
- MAY - Static variable in class nxopen.DateItemBuilder.MonthOfYear
-
- mb() - Method in interface nxopen.UFSession
-
- MB_SYSLOG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MB_SYSLOG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MC_DO_NOT_NORMALIZE_RESULT - Static variable in class nxopen.uf.UFSf.McResultFormat
-
- MC_NORMALIZE_RESULT - Static variable in class nxopen.uf.UFSf.McResultFormat
-
- MC_PHERSON_SUSPENSION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- McArrayData() - Constructor for class nxopen.uf.UFAssem.McArrayData
-
- McArrayData(int, Tag, Tag, Tag[], Tag[], Tag[], String) - Constructor for class nxopen.uf.UFAssem.McArrayData
-
- MCD - Static variable in class nxopen.mechatronics.PreferencesBuilder.MasterTypes
-
MCD
- MCD - Static variable in class nxopen.tooling.SIZERExportBuilder.RunMode
-
MCD Mode
- MCDMechanicalData() - Constructor for class nxopen.tooling.SIZERExportBuilder.MCDMechanicalData
-
- MCDMechanicalData(int, String, PhysicsConstraint, String, double, double, double, double) - Constructor for class nxopen.tooling.SIZERExportBuilder.MCDMechanicalData
-
Constructor for the MCDMechanicalData object.
- MCDSignalServerConfigurationBuilder - Interface in nxopen.mechatronics
-
- MCDSignalServerConfigurationCollection - Interface in nxopen.mechatronics
-
Represents a collection of MCDSignalServerConfigurationObject.
- MCDSignalServerConfigurationObject - Interface in nxopen.mechatronics
-
- mcdsignalServerConfigurations() - Method in interface nxopen.mechatronics.PhysicsManager
-
- McdSignalServerConfigurationtype - Class in nxopen.mechatronics
-
Represents configration data access type
- MCE_AUXFUN - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_CLAMP - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_COOLANT_OFF - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_COOLANT_ON - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_CUT_WIRE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_CUTCOM - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_CYCLE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_DWELL - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_FEDRAT - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_FLUSH - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_FLUSH_TANK - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_FROM - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_FROM_POINT - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_GENERIC_CYCLE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_GO_DELTA - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_GO_HOME - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_GOHOME_POINT - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_GOTO - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_LATHE_THREAD - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_MEASURING_AFTER_FINISHING - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_MEASURING_STOP - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_OP_MESSAGE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_OPT_SKIP_OFF - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_OPT_SKIP_ON - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_OPT_STOP - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_ORIGIN - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_POWER - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_PPRINT - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_PREFUN - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_RETURN_POINT - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_ROTATE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_ROTATE_TOOL - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_SELECT_HEAD - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_SEQNO - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_SET_MODES - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_SMOOTH_LEAD_IN - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_SMOOTH_LEAD_OUT - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_SPINDLE_OFF - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_SPINDLE_ON - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_SPINDLE_REVERSE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_START_ENGAGE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_START_POINT - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_STOP - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_SUPPRESS_WORKPIECE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_THREAD_WIRE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_TOOL_CHANGE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_TOOL_LENGTH_COMP - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_TOOL_PRESELECT - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_TRACKING_POINT_CHANGE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_TRACKING_POINT_CHANGE_MILL - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_USER_DEFINED - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_USER_USEFINED - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_WIRE_ANGLE - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_WIRE_CUTCOM - Static variable in class nxopen.cam.ToolpathEventType
-
- MCE_WIRE_GUIDES - Static variable in class nxopen.cam.ToolpathEventType
-
- mcElementCheck(Tag) - Method in interface nxopen.uf.UFSf
-
- mcfPath() - Method in interface nxopen.sim.KinematicImportMcfBuilder
-
Returns the path from the mcf file
License requirements: None.
- mcGap - Variable in class nxopen.uf.UFModl.SmcornerData
-
- mcLinearShape - Variable in class nxopen.uf.UFModl.SmcornerData
-
- mcOffset - Variable in class nxopen.uf.UFModl.SmcornerData
-
- MCS - Static variable in class nxopen.cam.DeltaMoveBuilder.IntentType
-
MCS
- MCS - Static variable in class nxopen.cam.GeometryGroup.OrientationTypes
-
derived blank orientation using MCS
- MCS - Static variable in class nxopen.cam.InspectionDeltaMoveBuilder.IntentType
-
MCS
- MCS - Static variable in class nxopen.cam.LaserLinearMove.RefTypes
-
MCS
- mcs() - Method in interface nxopen.cam.OrientGeomBuilder
-
Returns the MCS
License requirements: cam_base ("CAM BASE")
.
- MCS - Static variable in class nxopen.cam.Preferences.CsysInformationListingTypes
-
MCS
- MCS - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.CsTypes
-
MCS
- MCS_LINK_TO_RCS - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- MCS_ZY - Static variable in class nxopen.cam.LaserHeadOrientation.Types
-
MCS Z/Y
- mcsCsys() - Method in interface nxopen.cam.InspectionImportDmisBuilder
-
Returns the tag of the Csys to use as the MCS when importing the DMIS
License requirements: None.
- mcsLinkToRcs - Variable in class nxopen.uf.UFCam.Preferences
-
- mcsSpindleGroup() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the MCS spindle group
License requirements: None.
- mcsStat - Variable in class nxopen.uf.UFCam.Preferences
-
- mct() - Method in interface nxopen.UFSession
-
- mctTurrentId() - Method in interface nxopen.cam.MachineTurretGroupBuilder
-
Returns the Mct Turrent ID
License requirements: None.
- mctTurrentWpl() - Method in interface nxopen.cam.MachineTurretGroupBuilder
-
- mctTurrentWplType() - Method in interface nxopen.cam.MachineTurretGroupBuilder
-
- mdfFileName() - Method in interface nxopen.cae.DurabilityTransientEventBuilder
-
Returns the mdfFileName.
- MEA - Static variable in class nxopen.cam.InspectionMeasDataBuilder.InputFormatType
-
Measured data format
- MEA_HEM_VEC_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_HOLE_VEC_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_LOC_HOLE_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_LOC_HOLE_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_LOC_PIN_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_LOC_PIN_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_LOC_SLOT_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_LOC_SLOT_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_LOC_SURF_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_LOC_SURF_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_PT_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_SLOT_VEC_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_STUD_VEC_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_SURF_VEC_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_TRIM_VEC_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- MEA_VEC_NA_TYPE - Static variable in class nxopen.uf.UFProcessAid.Types
-
- meaFile() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the measured data file
License requirements: None.
- MEAN - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueSafetyFactorMethodEnum
-
Mean
- MEAN - Static variable in class nxopen.cae.Result.Component
-
- MEAN - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TensorType
-
- MEAN - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
Mean
- MEAN - Static variable in class nxopen.geometricanalysis.RadiusAnalysisBuilder.Types
-
Mean radius.
- MEAN - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.CurvatureType
-
- MEAN_AVERAGE - Static variable in class nxopen.cae.ResultMeasure.Operation
-
Evaluate for the mean average value
- MEAN_DISTANCE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeMethodType
-
Represents using the mean distance
- MEAN_MAGNITUDE - Static variable in class nxopen.cae.AfuMathOperation.Overall
-
Gets mean magnitude values of AFU records
- MEAN_OF_FLANGES_THICKNESS - Static variable in class nxopen.cae.connections.HeightType
-
Mean of flanges thickness
- MEAN_VECTOR - Static variable in class nxopen.cae.CAEConnectionBuilder.MethodTypeEnum
-
Based on Mean Vector
- MEASURABLE_ATTRIBUTE - Static variable in class nxopen.validate.RequirementCollection.SourceTypeOptions
-
- measure() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the measurement direction used in the table, left to right, or right to left.
- measure() - Method in interface nxopen.fields.NameVariable
-
Returns the measure of the variable
License requirements: None.
- Measure - Interface in nxopen
-
- MEASURE - Static variable in class nxopen.motion.ResultMeasure.ResultType
-
Result measure for measure
- measure(Tag, int) - Method in interface nxopen.uf.UFMotion
-
- measure() - Method in interface nxopen.Unit
-
Returns the unit measure name
License requirements: None.
- MEASURE_GEOMETRY - Static variable in class nxopen.annotations.DrivingValueBuilder.DrivingExpressionMode
-
- MEASURE_GEOMETRY - Static variable in class nxopen.SketchDimensionBuilder.ExpOption
-
remove expression, measure geometry
- measureAlong() - Method in interface nxopen.features.shipdesign.OrientationPointMethodsBuilder
-
Returns the indication of how to measure the distance used to determine the boundary of the region.
- measureAlongMode() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the method used to measure distances between planes.
- MeasureAngle - Interface in nxopen
-
Represents a single valued Angle measurement
To create or edit an instance of this class, use
MeasureAngleBuilder
Created in NX4.0.0
- MeasureAngle.CreateEmbeddedObjectData - Class in nxopen
-
- MeasureAngleBuilder - Interface in nxopen
-
- MeasureAngleBuilder.AngleType - Class in nxopen
-
Represents the angle type.
- MeasureAngleBuilder.ObjectType - Class in nxopen
-
Represents the object type.
- MeasureAngleBuilder.OrientationType - Class in nxopen
-
Represents the orientation type
- MeasureAngleBuilder.ProjectionType - Class in nxopen
-
Represents the projection type.
- measureAngles() - Method in interface nxopen.features.shipdesign.OrientationDefinitionBuilder
-
Returns the method in which to measure angles in the orientation objects.
- MeasureBodies - Interface in nxopen
-
Represents the measurement specific mass properties for a set of bodies
To create or edit an instance of this class, use
MeasureFaceBuilder
Created in NX4.0.0
- MeasureBodies.ActiveValue - Class in nxopen
-
Indicates the type of embedded measurement to create
- MeasureBodies.AnalysisUnit - Class in nxopen
-
Indicates the family of units used in mass property information listings
- MeasureBodies.CreateEmbeddedObjectData - Class in nxopen
-
- MeasureBodyBuilder - Interface in nxopen
-
- MeasureBuilder - Interface in nxopen
-
Represents a
MeasureBuilder
This is an abstract class, and cannot be instantiated.
- MeasureBuilder.AnnotationType - Class in nxopen
-
Represents the annotation type.
- MeasureBuilder.RequirementType - Class in nxopen
-
Represents the requirement type.
- MEASURED_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTableMethods
-
Rotate table by measured feature
- MEASURED_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationMethods
-
Rotate by Actual Feature
- MEASURED_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.XtMethods
-
Translate by Measured Feature
- MEASURED_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.YtMethods
-
Translate by Measured Feature
- MEASURED_FEATURE - Static variable in class nxopen.cam.InspectionAlignmentBuilder.ZtMethods
-
Translate by Measured Feature
- measuredGeometry() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the measured geometry
License requirements: None.
- measuredGeometry() - Method in interface nxopen.cam.InspectionUVGridBuilder
-
Returns the measured geometry
License requirements: None.
- MeasureDistance - Interface in nxopen
-
Represents a single valued distance measurement
To create or edit an instance of this class, use
MeasureDistanceBuilder
Created in NX4.0.0
- MeasureDistance.CreateEmbeddedObjectData - Class in nxopen
-
- MeasureDistanceBuilder - Interface in nxopen
-
- MeasureDistanceBuilder.DistanceType - Class in nxopen
-
the type of distance measurement
- MeasureDistanceBuilder.MeasureType - Class in nxopen
-
the subtype of distance measurement
- measuredLength() - Method in interface nxopen.features.vehicledesign.CloseRangeBlindVolumeListItemBuilder
-
Returns the measured length calculated from start parameter path curve point to end parameter path curve point.
- measuredPartName() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the measured part name
License requirements: None.
- MeasureFaceBuilder - Interface in nxopen
-
- MeasureFaces - Interface in nxopen
-
Represents the measurement of perimeter and area of a set of faces
To create or edit an instance of this class, use
MeasureFaceBuilder
Created in NX4.0.0
- MeasureFaces.ActiveValue - Class in nxopen
-
Indicates the type of embedded measurement to create
- MeasureFaces.CreateEmbeddedObjectData - Class in nxopen
-
- measureFrom() - Method in interface nxopen.cam.NcmScEngRetBuilder
-
Returns the height or length from which engage linear/helical/plunge is measured
License requirements: None.
- MeasureLength - Interface in nxopen
-
Represents a single valued length measurement .
- MeasureLength.CreateEmbeddedObjectData - Class in nxopen
-
- measureManager() - Method in interface nxopen.BasePart
-
Returns the measure manager for this part .
- MeasureManager - Interface in nxopen
-
Provides methods for manipulating the measurement objects in a part.
- MeasureManager.EndpointType - Class in nxopen
-
Indicates the end point to be used when lines or linear edges
are referenced in an angle between two objects
- MeasureManager.ExtremeType - Class in nxopen
-
the type of extreme measurement
- MeasureManager.MeasureType - Class in nxopen
-
Indicates if a the distance measurement will be minimum or maximum
distance between the two objects
- MeasureManager.ProjectionType - Class in nxopen
-
Indicates the type of a projected distance measurement
- MeasureManager.RadialMeasureType - Class in nxopen
-
Indicates the type of a radial distance measurement
- measurement() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
Returns the measurement
License requirements: None.
- measurement() - Method in interface nxopen.annotations.BaseRadialDimensionBuilder
-
Returns the measurement
License requirements: None.
- measurement() - Method in interface nxopen.annotations.BaseRapidDimensionBuilder
-
Returns the measurement
License requirements: None.
- measurement() - Method in interface nxopen.annotations.GeodesicDimensionBuilder
-
Returns the measurement
License requirements: None.
- measurement - Variable in class nxopen.MeasureAngle.CreateEmbeddedObjectData
-
the measurement
- measurement - Variable in class nxopen.MeasureBodies.CreateEmbeddedObjectData
-
the measurement
- measurement - Variable in class nxopen.MeasureDistance.CreateEmbeddedObjectData
-
the measurement
- measurement - Variable in class nxopen.MeasureFaces.CreateEmbeddedObjectData
-
the measurement
- measurement - Variable in class nxopen.MeasureLength.CreateEmbeddedObjectData
-
the measurement
- Measurement - Interface in nxopen
-
Provides methods for calculating and displaying the measurement information.
- measurement - Variable in class nxopen.MeasurePolarAngle.CreateEmbeddedObjectData
-
the measurement
- measurement - Variable in class nxopen.MeasurePolarArea.CreateEmbeddedObjectData
-
the measurement
- measurement - Variable in class nxopen.MeasurePolarRadius.CreateEmbeddedObjectData
-
the measurement
- measurement() - Method in interface nxopen.Session
-
Returns the
Measurement
instance belonging to this session
Created in NX3.0.0
- Measurement() - Constructor for class nxopen.uf.UFMotion.Measurement
-
- Measurement(UFMotion.MeasurementType, Tag, Tag) - Constructor for class nxopen.uf.UFMotion.Measurement
-
- MEASUREMENT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
measurement, used for implementing weld advisor parameters
- Measurement.ArcLengthBetweenPointsData - Class in nxopen
-
- Measurement.DeviationReportType - Class in nxopen
-
Describes type of the 'Deviation Checking' report.
- Measurement.DisplayMinimumDistanceData - Class in nxopen
-
- Measurement.MinimumDistanceData - Class in nxopen
-
- Measurement.MinimumOrthogonalDistanceData - Class in nxopen
-
- Measurement.RoutingPathLengthData - Class in nxopen
-
- MEASUREMENT_CUSTOM1_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_CUSTOM1FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- MEASUREMENT_CUSTOM2_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_CUSTOM2FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- MEASUREMENT_CUSTOM3_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_CUSTOM3FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- MEASUREMENT_HEM_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_HEM_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- MEASUREMENT_HOLE_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_HOLE_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- MEASUREMENT_LOCATOR - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Measurement Locator command
- MEASUREMENT_LOCATOR - Static variable in class nxopen.weld.WeldPointExitBuilder.CommandName
-
Measurement Locator command
- MEASUREMENT_MODE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a statement to set the measurement mode
- MEASUREMENT_POINT - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_SLOT_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_SLOT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- MEASUREMENT_STUD_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_STUD_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- MEASUREMENT_SURFACE_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_SURFACE_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- MEASUREMENT_TRIM_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- MEASUREMENT_TRIM_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- MEASUREMENT_VECTOR_NON_ASSOC - Static variable in class nxopen.uf.UFConstants
-
- measurementDefaultHeight() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the default height of the object for measurement to be created.
- measurementDefaultWidth() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the default width of the object for measurement to be created.
- measurementDepth() - Method in interface nxopen.cam.ProbeInspectBorebossMoveBuilder
-
Returns the probing depth
License requirements: None.
- measurementDirection() - Method in interface nxopen.annotations.Dimension
-
Returns the measurement direction.
- measurementDirection() - Method in interface nxopen.annotations.DimensionData
-
Returns the measurement direction
License requirements: None.
- measurementDirectionView() - Method in interface nxopen.annotations.Dimension
-
Returns the measurement direction view.
- measurementDirectionView() - Method in interface nxopen.annotations.DimensionData
-
Returns the measurement direction view
License requirements: None.
- measurementHoleSize() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the hole_size of the object for measurement to be created.
- measurementIdLowerRange() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the measurement id lower range
License requirements: None.
- measurementIdUpperRange() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the measurement id upper range
License requirements: None.
- measurementLinkAttachment() - Method in interface nxopen.motion.ControlInputBuilder
-
Returns the measurement link attachment.
- measurementMethod() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder
-
Returns the measurement method used to position point 1.
- measurementMethod() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the measurement method
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- measurementName() - Method in interface nxopen.Scalar
-
Returns the measurement name, if the scalar represents a measurement.
- measurementNamePrefix() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the measurement name prefix
License requirements: None.
- measurementObject() - Method in interface nxopen.features.AngularDimBuilder
-
Returns the measurement object is for the move object
License requirements: None.
- measurementObject() - Method in interface nxopen.features.LinearDimensionBuilder
-
Returns the measurement object to which the ADM Linear Dimension is measured to
License requirements: None.
- measurementObject() - Method in interface nxopen.motion.MotionSensorBuilder
-
Returns the first marker object
License requirements: None.
- measurementObjectColor() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the measurement object color
License requirements: None.
- measurementObjectLayer() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the measurement object layer
License requirements: None.
- measurementPartNumber() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the measurement part number
License requirements: None.
- measurementPoint() - Method in interface nxopen.annotations.GeodesicDimensionBuilder
-
Returns the measurement point
License requirements: None.
- measurementSamples() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the number of measurement samples
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- measurementSlotLength() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the slot height of the object for measurement to be created.
- measurementSlotWidth() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the slot width of the object for measurement to be created.
- measurementStudSize() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the stud size of the object for measurement to be created.
- measurementType() - Method in interface nxopen.annotations.BaseAngularDimensionBuilder
-
Returns the measurement type
License requirements: None.
- measurementType() - Method in interface nxopen.annotations.BaseLinearDimensionBuilder
-
Returns the measurement type
License requirements: None.
- measurementType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the measurement type
License requirements: None.
- measurementType() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
Returns the measurement (axis) type
License requirements: None.
- measurementType() - Method in interface nxopen.GenericMeasure
-
Returns the type of the measurement
License requirements: None.
- measurementType() - Method in interface nxopen.motion.LinkCouplerCoupleBuilder
-
Returns the measurement type
License requirements: mechanisms ("MECHANISMS")
.
- MeasurePoint - Interface in nxopen
-
Represents a point measurement .
- MeasurePolarAngle - Interface in nxopen
-
Represents a single valued polar angle measurement .
- MeasurePolarAngle.CreateEmbeddedObjectData - Class in nxopen
-
- MeasurePolarArea - Interface in nxopen
-
Represents a single valued polar area measurement .
- MeasurePolarArea.CreateEmbeddedObjectData - Class in nxopen
-
- MeasurePolarRadius - Interface in nxopen
-
Represents a single valued polar radius measurement .
- MeasurePolarRadius.CreateEmbeddedObjectData - Class in nxopen
-
- MeasureRectangularExtreme - Interface in nxopen
-
Represents a rectangular extreme point measurement .
- measureType() - Method in interface nxopen.mechatronics.AccelerometerBuilder
-
Returns the measure type.
- measureType() - Method in interface nxopen.mechatronics.DistanceSensorBuilder
-
Returns the measure type.
- measureType() - Method in interface nxopen.mechatronics.GenericSensorBuilder
-
Returns the measure type.
- measureType() - Method in interface nxopen.mechatronics.InclinometerBuilder
-
Returns the measure type.
- measureType() - Method in interface nxopen.mechatronics.PositionSensorBuilder
-
Returns the measure type.
- measureType() - Method in interface nxopen.mechatronics.VelocitySensorBuilder
-
Returns the measure type.
- measuringPoint() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut measuring point
License requirements: None.
- measuringPosition() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the test cut measuring position
License requirements: None.
- measuringStop() - Method in interface nxopen.cam.TurnRoughFinishTestCut
-
Returns the measuring stop
License requirements: cam_base ("CAM BASE")
.
- MECHANICAL - Static variable in class nxopen.preferences.RoutingApplicationView.AppType
-
In routing mechanical application.
- MECHANICAL - Static variable in class nxopen.weld.WeldJointBuilder.WeldTypes
-
Mechanical joint for pipe welding.
- mechanicalColorFontWidth() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the color, font, and width of the mechanical joint curves.
- MechanicalData() - Constructor for class nxopen.tooling.SIZERExportBuilder.MechanicalData
-
- MechanicalData(int, String, MotionSolution, Graph, Graph, double, double, double, double) - Constructor for class nxopen.tooling.SIZERExportBuilder.MechanicalData
-
Constructor for the MechanicalData object.
- MechanicalLoadSumBuilder - Interface in nxopen.cae
-
- MechanicalLoadSumBuilder.UserUnit - Class in nxopen.cae
-
User Specified output unit
- MechanicalRoutingSubsetBuilder - Interface in nxopen.assemblies
-
A MechanicalRoutingSubsetBuilder is used to create/edit Subsets
Subset
that are used to define the context needed to perform a Mechanical Routing Design activity.
- MechanicalRoutingSubsetBuilder.SurroundingDataRecipeMethod - Class in nxopen.assemblies
-
Represents the method to use to determine the surrounding data corresponding to the routing design content that has been loaded.
1.
- MechanismExport - Interface in nxopen.motion
-
Represents a Mechanism Export object used to export one or more Motion objects to a text file.
- mechanismExport() - Method in interface nxopen.motion.MotionSession
-
Returns the
MechanismExport
object belonging to this part
Created in NX12.0.0
- MechanismExport.PositionOrientationFormat - Class in nxopen.motion
-
Format to export the position and orientation data.
- MechanismImport - Interface in nxopen.motion
-
Represents a Mechanism Import object used to import a Motion model from a text file.
- mechanismImport() - Method in interface nxopen.motion.MotionSession
-
Returns the
MechanismImport
object belonging to this part
Created in NX12.0.0
- MechanismImport.NamingRule - Class in nxopen.motion
-
Naming Rule type to modify imported object's name
- MECHATRONICS - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a Mechatronics Concept Designer file new template
- Mechatronics - Interface in nxopen.motion
-
- mechatronics() - Method in interface nxopen.motion.MotionManager
-
- MechatronicsBuilder - Interface in nxopen.motion
-
- MechatronicsBuilder.MechatronicsModelType - Class in nxopen.motion
-
the mechatronics type - possible values are Matlab or Amesim
- MechatronicsBuilder.PurposeType - Class in nxopen.motion
-
the mechatronics purpose type - possible values are Import and Export
- MechatronicsBuilder.SolverCommunicationIntervalType - Class in nxopen.motion
-
the mechatronics communication interval type - only for Amesim!
- MechatronicsBuilder.SolverIntegrationType - Class in nxopen.motion
-
the mechatronics integration type - possible values are ModelExchange and CoSimulation
- MechatronicsCollection - Interface in nxopen.motion
-
Represents a collection of Mechatronics
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- MechatronicsManager - Interface in nxopen.mechatronics
-
Contains the collection objects for creating and iterating over Mechatronics Designer System Navigator objects.
- mechatronicsManager() - Method in interface nxopen.Part
-
Returns the MechatronicsManager instance belonging to this part .
- MechatronicsPortCollection - Interface in nxopen.motion
-
Represents a collection of ports used as outputs by Mechatronics
To obtain an instance of this class, refer to
Mechatronics
Created in NX11.0.0
- MechatronicsSession - Interface in nxopen.mechatronics
-
Represents Mechatronics session
To obtain an instance of this class, refer to
Session
Created in NX9.0.0
- mechatronicsSession() - Method in interface nxopen.Session
-
- MechatronicsSession.LogicalTypesData - Class in nxopen.mechatronics
-
- MechatronicsSession.SimulationAction - Class in nxopen.mechatronics
-
Represents the action of simulation.
- mechatronicsType() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the mechatronics type - possible values are Matlab or Amesim
License requirements: mechanisms ("MECHANISMS")
.
- MECHDES_RUNTIME_CODE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MECHDES_RUNTIME_CODE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- medianRadius() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the median radius.
- medianStartPosition() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the median start position.
- medianVelocity() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the median velocity.
- MEDIUM - Static variable in class nxopen.annotations.DraftingNoteBuilder.ThicknessTypes
-
Medium thickness type
- MEDIUM - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Convergency
-
Onestep solver convergency level is medium
- MEDIUM - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.Priority
-
Medium priority
- MEDIUM - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.Priority
-
- MEDIUM - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Priority
-
- MEDIUM - Static variable in class nxopen.cae.ModelDisplayBuilder.ElmDispQuality
-
Medium
- MEDIUM - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
-
Medium stepsize
- MEDIUM - Static variable in class nxopen.cae.PolygonGeometryManager.PolygonBodyResolutionType
-
- MEDIUM - Static variable in class nxopen.cam.CycleCoolant.Flow
-
coolant flow medium
- MEDIUM - Static variable in class nxopen.CGMBuilder.ImageResolutionOption
-
Medium Resolution
- MEDIUM - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.Convergency
-
Onestep solver convergency level is medium
- MEDIUM - Static variable in class nxopen.display.EnvironmentBuilder.ImageBlurType
-
- MEDIUM - Static variable in class nxopen.display.ImageBasedLighting.ImageBlurType
-
- MEDIUM - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageResolutionType
-
static image output resolution of 150 DPI (dots per inch)
- MEDIUM - Static variable in class nxopen.display.RayTracedStudioBuilder.StationaryDisplayQualityType
-
Good ray traced display quality with good performance (Qualtiy Interactive for Iray+)
- MEDIUM - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.DynamicRayTracedStudioTilingQualityType
-
Medium sized tiles used during progressive updates of ray traced display
- MEDIUM - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType
-
static image output resolution of 150 DPI (dots per inch)
- MEDIUM - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StaticAntialiasingType
-
Good antialiasing performed for static image rendering
- MEDIUM - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType
-
Good quality ray traced display with good performance for static image rendering
- MEDIUM - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StationaryAntialiasingType
-
Good antialiasing performed when dynamic interaction stops
- MEDIUM - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StationaryRayTracedStudioQualityType
-
Good ray traced display quality with good performance when dynamic interaction stops
- MEDIUM - Static variable in class nxopen.display.SelPref.SelectionRadius
-
selection ball size medium
- MEDIUM - Static variable in class nxopen.display.Shadows.SsaoContrastType
-
Medium contrast
- MEDIUM - Static variable in class nxopen.display.Shadows.SsaoQualityType
-
Medium quality setting
- MEDIUM - Static variable in class nxopen.display.TransientText.TextSize
-
- MEDIUM - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Medium
- MEDIUM - Static variable in class nxopen.drawings.ViewCreationWizardBuilder.ResolutionOption
-
view display quality Medium
- MEDIUM - Static variable in class nxopen.facet.MultiPatchAlignmentBuilder.ResolutionType
-
Uses a medium number of facets for the alignment.
- MEDIUM - Static variable in class nxopen.facet.STLImportBuilder.AngularToleranceTypes
-
- MEDIUM - Static variable in class nxopen.features.vehicledesign.ReflectionDataBuilder.ResolutionType
-
medium
- MEDIUM - Static variable in class nxopen.HumanPosturePredictionBuilder.CushionFirmnessType
-
Indicate medium cushion
- MEDIUM - Static variable in class nxopen.markup.Icon.Size
-
Medium size
- MEDIUM - Static variable in class nxopen.motion.PostProcess.EnvelopeAccuracyModes
-
- MEDIUM - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationConvergenceSpeedType
-
Medium convergence speed
- MEDIUM - Static variable in class nxopen.PlotBuilder.ImageResolutionOption
-
Medium Resolution
- MEDIUM - Static variable in class nxopen.preferences.GeneralToleranceOption
-
Medium
- MEDIUM - Static variable in class nxopen.preferences.GeneralViewQualityOption
-
Medium
- MEDIUM - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.PlotQualityType
-
- MEDIUM - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionType
-
- MEDIUM - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.CagePolylineVertexSizes
-
- MEDIUM - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexSizeTypes
-
- MEDIUM - Static variable in class nxopen.preferences.VisualizationHandles.HandleSizeValue
-
Medium Handle Size
- MEDIUM - Static variable in class nxopen.Print3dBuilder.PrintInfillEnum
-
- MEDIUM - Static variable in class nxopen.Print3dBuilder.PrintQualityEnum
-
- MEDIUM - Static variable in class nxopen.PrintBuilder.ImageResolutionOption
-
Medium Resolution
- MEDIUM - Static variable in class nxopen.PrintPDFBuilder.ImageResolutionOption
-
Medium Resolution
- MEDIUM - Static variable in class nxopen.STLImporter.AngularToleranceType
-
Import with medium angular tolerance.
- MEDIUM - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextSize
-
- MEDIUM - Static variable in class nxopen.visualreporting.GroupLabel.TagPriorityOption
-
Medium priority
- MEDIUM - Static variable in class nxopen.VRMLImporter.AngularToleranceType
-
Import with medium angular tolerance.
- MEDIUM_AQUA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_AZURE_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_AZURE_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_AZURE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_BROWN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_CARROT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_COBALT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_CORAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_CORNFLOWER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_CRIMSON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_EMERALD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_FADED_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_FADED_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_FADED_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_FADED_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_FADED_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_FADED_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_FOREST_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_FUCHSIA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_GOLD_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_GRAY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_ICE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_INDIGO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_KHAKI_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_LAVENDER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_LEAF_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_LEMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_LIME_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_MAROON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_MIDNIGHT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_MINT_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_MOSS_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_OLIVE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_ORANGE_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_ORANGE_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_PEACH_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_PINE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_PINK_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_PINK_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_PINK_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_PISTACHIO_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_PLUM_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_PURPLE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_ROYAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_SALMON_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_SEA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_SKY_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_SPRING_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_SPRING_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_STEEL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_STONE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_TAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_TEAL_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_TEAL_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_TEAL_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_TURQUOISE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_UMBER_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_VIOLET_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_VIOLET_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_VIOLET_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_WEAK_BLUE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_WEAK_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_WEAK_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_WEAK_MAGENTA_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_WEAK_RED_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_WEAK_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MEDIUM_YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- MELT_FRONT_TEMPERATURE - Static variable in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
- MELT_FRONT_TIME - Static variable in class nxopen.tooling.FlowDisplayBuilder.AnalysisResults
-
- MELT_THROUGH - Static variable in class nxopen.annotations.LineWeldDataBuilder.ContourSymbolType
-
- MELT_THROUGH - Static variable in class nxopen.annotations.SupplementarySymbol
-
Specifies melt through supplementary weld symbol
- MEMBER - Static variable in class nxopen.routing.RunItem.Type
-
A "Member" item type
- MEMBER_ITEMS - Static variable in class nxopen.routing.IntegrateRunsBuilder.Button
-
Set as MemberItem for selected node in tree list
- memberCount - Variable in class nxopen.uf.UFFam.FamilyData
-
- MemberData() - Constructor for class nxopen.uf.UFBound.MemberData
-
- MemberData(Tag, int, int, double[], double[], double[]) - Constructor for class nxopen.uf.UFBound.MemberData
-
- MemberData() - Constructor for class nxopen.uf.UFFam.MemberData
-
- MemberData(int, String[]) - Constructor for class nxopen.uf.UFFam.MemberData
-
- MemberIdentifier - Interface in nxopen.partfamily
-
This class represents the unique identifier for a part family member.
- memberIndex - Variable in class nxopen.uf.UFFam.AskInstanceData
-
- memberIndex - Variable in class nxopen.uf.UFFam.IntentData
-
- memberItems() - Method in interface nxopen.routing.DefineRunBuilder
-
Returns the MEMBER items of the run.
- memberItems - Variable in class nxopen.uf.UFRouteRun.AskMemberItemsData
-
- memberPartHandle - Variable in class nxopen.uf.UFUgmgr.AskFamilyMemberHandlesData
-
- memberPartrevHandle - Variable in class nxopen.uf.UFUgmgr.AskFamilyMemberHandlesData
-
- members() - Method in interface nxopen.blockstyler.Explorer
-
Returns the members.
- members() - Method in interface nxopen.blockstyler.Group
-
Returns the Members
License requirements: None.
- members() - Method in interface nxopen.blockstyler.ScrolledWindow
-
Returns the Members
License requirements: None.
- members() - Method in interface nxopen.blockstyler.TabControl
-
Returns the Members
License requirements: None.
- members() - Method in interface nxopen.blockstyler.Table
-
Returns the Members
License requirements: None.
- members() - Method in interface nxopen.blockstyler.Wizard
-
Returns the Members
License requirements: None.
- members - Variable in class nxopen.uf.UFAssem.AskRefSetData
-
- members - Variable in class nxopen.uf.UFAssem.AskRefSetMembersData
-
- members - Variable in class nxopen.uf.UFDrf.AskCalloutRowMembersData
-
- membersData - Variable in class nxopen.uf.UFBound.AllData
-
- memberTag - Variable in class nxopen.uf.UFBound.MemberData
-
- MEMBRANE_XX - Static variable in class nxopen.cae.Result.Component
-
- MEMBRANE_XY - Static variable in class nxopen.cae.Result.Component
-
- MEMBRANE_YY - Static variable in class nxopen.cae.Result.Component
-
- membsPp - Variable in class nxopen.uf.UFSf.LocateSolutionBoundaryConditionsNxData
-
- membsPp - Variable in class nxopen.uf.UFSf.LocateSolutionLoadsNxData
-
- membsPp - Variable in class nxopen.uf.UFSf.LocateStepBoundaryConditionsNxData
-
- membsPp - Variable in class nxopen.uf.UFSf.LocateStepLoadsNxData
-
- MEMORY - Static variable in class nxopen.ame.MemorySectionType
-
- memorySection() - Method in interface nxopen.ame.PlcSymbolBuilder
-
Returns the enum io type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- MemorySectionType - Class in nxopen.ame
-
Definition of the memory section types
- MENU - Static variable in class nxopen.uf.UFUi.MenuType
-
- MENU_DXF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MENU_DXF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MenuBarManager - Interface in nxopen.menubar
-
Interface for the MenuBarManager object
To obtain an instance of this class, refer to
UI
Created in NX6.0.0
- menuBarManager() - Method in interface nxopen.UI
-
Returns the
MenuBarManager
belonging to the current session
Created in NX3.0.0
- MenuBarManager.ActionCallback - Interface in nxopen.menubar
-
Prototype for the action callbacks
- MenuBarManager.CallbackStatus - Class in nxopen.menubar
-
Return values for action callbacks
- MenuBarManager.ConfigureContextMenu - Interface in nxopen.menubar
-
Prototype for the callback used to configure a context menu.
- MenuBarManager.EnterMenuApplication - Interface in nxopen.menubar
-
Prototype for callback called whenever the application is entered
- MenuBarManager.ExitMenuApplication - Interface in nxopen.menubar
-
Prototype for callback called whenever the application is exited
- MenuBarManager.InitializeMenuApplication - Interface in nxopen.menubar
-
Prototype for application initialization callback
- menuBarName() - Method in interface nxopen.menubar.MenuButtonEvent
-
Returns the name of the menu bar.
- MenuButton - Interface in nxopen.menubar
-
Implements the Object for Menu Buttons .
- MenuButton.SensitivityStatus - Class in nxopen.menubar
-
Sensitivity Status
- MenuButton.Toggle - Class in nxopen.menubar
-
Toggle Status
- MenuButton.Type - Class in nxopen.menubar
-
Available button types
- MenuButtonEvent - Interface in nxopen.menubar
-
Implements the Event Object for Menu Buttons .
- merge() - Method in interface nxopen.features.PartModule
-
Merges part module and its linked part module into a single part module
License requirements: usr_defined_features ("USER DEFINED FEATURES")
.
- MERGE - Static variable in class nxopen.routing.RouteManager.ImportMode
-
Update existing objects with data from the imported objects.
- MERGE - Static variable in class nxopen.tooling.DieBaseBuilder.DesignToolOption
-
merge sub die base
- MERGE - Static variable in class nxopen.tooling.ScrapDesignBuilder.EditScrapType
-
Merges two scraps into one
- MERGE_BENDS - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Types
-
the direct unfold type of merge bends
- MERGE_WITH_EXISTING - Static variable in class nxopen.cae.SolverAppendOption.ImportBehaviorOption
-
- MERGE_WITH_PRIMARY_RESULTS_DATA - Static variable in class nxopen.cae.CompanionResultBuilder.ResultAppendMethod
-
Companion results will be merged with existing load cases if possible, else new load cases will be created
- MERGE_WITH_PRIMARY_RESULTS_DATA - Static variable in class nxopen.cae.ResultsManipulationBuilder.ResultAppendMethod
-
- MERGEABLE - Static variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.ListOption
-
List the duplicate node pairs mergeable
- mergeAllFaces(Body) - Method in interface nxopen.facet.PolygonModelingBuilder
-
Merges all faces of the input body
License requirements: nx_polygon_modeling (" NX Polygon Modeling")
.
- mergeAngleTolerance() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the merge angle tolerance
License requirements: None.
- MergeBuilder - Interface in nxopen.mechanicalrouting
-
- mergeCells(int, int, int, int) - Method in interface nxopen.diagramming.tables.TableBuilder
-
The method to merge the cells in the given ranges.
- mergeCells(Tag, Tag) - Method in interface nxopen.uf.UFTabnot
-
- mergeCellsWithSameSize() - Method in interface nxopen.annotations.HoleTableSettingsFormatBuilder
-
Returns the merge cells with same size
License requirements: None.
- mergeChains(NXObject, NXObject, Point3d) - Method in interface nxopen.SketchOffsetBuilder
-
This function merges the two chains.
- MERGED - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MultiChannelTurningModeTypes
-
Merged
- mergeDistance() - Method in interface nxopen.cam.MillCutParameters
-
Returns the merge distance builder (tool dependent double)
License requirements: None.
- mergeDistBuilder() - Method in interface nxopen.cam.FlowBuilder
-
Returns the builder of flow merge distance
License requirements: None.
- MergedNodesResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit MergedNodesResult is a class containing information about nodes connecting components.
- mergeDuplicateNodes() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
Merges the duplicate nodes and clear all cached duplicate nodes in this builder.
- mergeDuplicateRcps(double, ControlPoint[]) - Method in interface nxopen.routing.RouteManager
-
Finds the duplicate Routing Control Points (RCPs) within given tolerance and
merges them.
- mergeDupNode() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns a value indicating whether duplicate nodes created during split are to be merged.
- mergeEdges() - Method in interface nxopen.cae.MappedMeshBuilder
-
Returns the merge edges option
License requirements: None.
- mergeEdgeSetting() - Method in interface nxopen.cae.AutoHealGeometryBuilder
-
Returns the merge edge option
License requirements: None.
- MergeFaceBuilder - Interface in nxopen.cae
-
- mergeFacePairs(NXObject[]) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Merges the face pairs
License requirements: solid_modeling ("SOLIDS MODELING")
.
- mergeFaces() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the merge-faces option
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- mergeFacesIfPossible() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns a value indicating whether to merge the faces if possible
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- mergeFacesIfPossible() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns a value indicating whether to merge the faces if possible
License requirements: None.
- mergeFacesIfPossible() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns a value that indicates whether to the merge faces if possible
License requirements: None.
- mergeFacesOption() - Method in interface nxopen.features.VarsweepBuilder
-
Returns the merge faces option
License requirements: None.
- MergeFacetBodyBuilder - Interface in nxopen.facet
-
- MergeFacetBodyBuilder.Input - Class in nxopen.facet
-
Represents the option for keeping, deleting or hiding input two facet bodies after builder committing
- MergeFacetFacesBuilder - Interface in nxopen.facet
-
- mergeHeaderCells(int, int, int, int) - Method in interface nxopen.diagramming.tables.TableBuilder
-
The method to merge the header cells in the given ranges.
- mergeMeshes(Mesh[]) - Method in interface nxopen.cae.MeshManager
-
Call for doing Merge Meshes
License requirements: nx_masterfem ("Finite Element Modeling")
.
- mergeNodeOption - Variable in class nxopen.uf.UFSf.Sf1dMeshData
-
- mergeNodesColor - Variable in class nxopen.cae.modelcheck.DuplicateNodesCheckBuilder.DisplaySettings
-
The merged nodes display color
- mergeNodeTol() - Method in interface nxopen.cae.CAEWeldConnectionBuilder
-
Returns the merge node tol
License requirements: None.
- mergeOccurrenceNodes() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
Returns a value indicating whether to merge occurrence nodes in afem context
License requirements: None.
- mergeOutput() - Method in interface nxopen.tooling.RemoveHolesBuilder
-
Returns the reduce number of output features setting
License requirements: None.
- mergePrevious() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the Merge Previous flag
License requirements: None.
- mergeRcps(int, Tag[], Tag) - Method in interface nxopen.uf.UFRoute
-
- MergeRcpsData() - Constructor for class nxopen.uf.UFRoute.MergeRcpsData
-
- mergeRegions() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the multiple regions to merge together as plate body.
- mergeReports(VisualReport[], String, String) - Method in interface nxopen.visualreporting.VisualReportManager
-
- mergeRsets(UFVariant, UFVariant) - Method in interface nxopen.uf.UFLib
-
- mergeSegment() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Merges the selected segment with its neighboring segments.
- mergeSegment() - Method in interface nxopen.tooling.GuidedExtensionBuilder
-
Merges the selected segment with its neighboring segments.
- mergeSheets() - Method in interface nxopen.JtCreator
-
Returns the mergeSheets * - Specifies whether all sheets are written to a single node or separate node in JT file
License requirements: None.
- mergeSolids() - Method in interface nxopen.JtCreator
-
Returns the mergeSolids * - Specifies whether all solids are written to a single node or separate node in JT file
License requirements: None.
- MergeStocksBuilder - Interface in nxopen.routing
-
Represents a
MergeStocksBuilder
Builder for merging routing stocks ( including space reservation stocks ).
- MergeSubdivisionBodiesBuilder - Interface in nxopen.features.subdivision
-
- MergeSubdivisionBodiesBuilder.InputBodyOptions - Class in nxopen.features.subdivision
-
- MergeSubopCommand - Interface in nxopen.cam
-
Represents an Merge Subop Command Builder .
- mergeTolerance - Variable in class nxopen.uf.UFSf.AskMeshMatingConditionData
-
- mergeType() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the curve types if any to merge after they are made continuous.
- mesh() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Create FEM 2-D meshes based on the unform region surfaces and the target region surfaces.
- mesh() - Method in interface nxopen.cae.CAEConnection
-
Returns the mesh associated to this recipe
License requirements: nx_masterfem ("Finite Element Modeling")
.
- mesh() - Method in interface nxopen.cae.FEElement
-
Returns the mesh for this element
License requirements: None.
- Mesh - Interface in nxopen.cae
-
Represents a Mesh.
- mesh() - Method in interface nxopen.cae.NodeElementInfoBuilder
-
Returns the owning mesh
License requirements: None.
- MESH - Static variable in class nxopen.cae.PolygonFaceOnMeshBuilder.PolygonFaceOnMeshType
-
2D Mesh
- MESH - Static variable in class nxopen.cae.Post.DisplayColorSchemeType
-
- mesh() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Create FEM 2-D meshes based on the unform region surfaces and the target region surfaces.
- MESH - Static variable in class nxopen.features.PatchOpeningsBuilder.Types
-
Patch with through curve mesh
- MESH - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Mesh
- MESH - Static variable in class nxopen.tooling.CalculateAreaBuilder.SheetMethodType
-
Using mesh method to create the sheet body.
- MESH - Static variable in class nxopen.tooling.LsdynaKfileGeneratorBuilder.OperTypes
-
Meshes the forming object
- Mesh0d - Interface in nxopen.cae
-
Represents 0d Mesh
To create or edit an instance of this class, use
Mesh0dBuilder
Created in NX6.0.0
- MESH0D - Static variable in class nxopen.cae.Mesh0dBuilder.MeshCreationType
-
create 0d Mesh on selected geometry
- MESH0D - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 0d meshes
- MESH0D_CONCENTRATED_MASS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 0d concentrated mass meshes
- MESH0D_DISTRIBUTED_MASS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 0d distributed mass meshes
- MESH0D_HEAT_BODY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 0d heat body meshes
- MESH0D_NODE_TO_GROUND - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 0d node to ground meshes
- Mesh0dBuilder - Interface in nxopen.cae
-
- Mesh0dBuilder.MeshCreationType - Class in nxopen.cae
-
the 0d mesh creation option
- Mesh1d - Interface in nxopen.cae
-
Represents 1d Mesh
To create or edit an instance of this class, use
Mesh1dBuilder
Created in NX6.0.0
- MESH1D - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d mesh types
- MESH1D_BAR - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d bar mesh types
- MESH1D_BEAM - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d beam mesh types
- MESH1D_BEARING - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d bearing mesh types
- MESH1D_EDGE_CONTACT - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d edge contact mesh types
- MESH1D_EDGE_FACE_CONNECTION - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d edge face connection mesh types
- MESH1D_FACE_CONTACT - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d face contact mesh types
- MESH1D_INTERPOLATION - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d interpolation mesh types
- MESH1D_MASS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d massmesh types
- MESH1D_MPC - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mpc mesh types
- MESH1D_PLOTEL - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d PLOTEL mesh types
- MESH1D_RIGID_LINK - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d rigid link mesh types
- MESH1D_ROD - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d rod mesh types
- MESH1D_SPRING - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d spring mesh types
- MESH1D_WELD - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 1d weld mesh types
- Mesh1dBuilder - Interface in nxopen.cae
-
- Mesh2d - Interface in nxopen.cae
-
Represents 2d Mesh
This is an abstract class
.
- MESH2D - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 2d meshes
- MESH2D_QUAD4 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 2d meshes with quadrilateral 4 node elements
- MESH2D_QUAD8 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 2d meshes with quadrilateral 8 node elements
- MESH2D_TRI3 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 2d meshes with triangular 3 node elements
- MESH2D_TRI6 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 2d meshes with triangular 6 node elements
- Mesh2dBuilder - Interface in nxopen.cae
-
- Mesh2dBuilder.GeometryType - Class in nxopen.cae
-
- Mesh2dFree - Interface in nxopen.cae
-
Represents 2d Mesh
To create or edit an instance of this class, use
Mesh2dBuilder
Created in NX6.0.0
- Mesh3d - Interface in nxopen.cae
-
Represents 3d Mesh
To create or edit an instance of this class, use
Mesh3dTetBuilder
Created in NX6.0.0
- MESH3D - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes
- MESH3D_HEX20 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with hexahedral elements with 20 nodes
- MESH3D_HEX8 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with hexahedral elements with 8 nodes
- MESH3D_HEXCOHES20 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with hexahedral cohesive elements with 20 nodes
- MESH3D_HEXCOHES8 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with hexahedral cohesive elements with 8 nodes
- MESH3D_PYRAMID13 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with pyramid elements with 13 nodes
- MESH3D_PYRAMID5 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with pyramid elements with 5 nodes
- MESH3D_PYRAMID_MIXED - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with pyramid elements with dropped mid-nodes
- MESH3D_TET10 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with tetrahedral 10 node elements
- MESH3D_TET4 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with tetrahedral 4 node elements
- MESH3D_TET_MIXED - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with tetrahedral elements with dropped mid-nodes
- MESH3D_WDGCOHES15 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with wedge cohesive elements with 15 nodes
- MESH3D_WDGCOHES6 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with wedge cohesive elements with 6 nodes
- MESH3D_WEDGE15 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with wedge elements with 15 nodes
- MESH3D_WEDGE6 - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all 3d meshes with wedge elements with 6 nodes
- Mesh3dHexBuilder - Interface in nxopen.cae
-
- Mesh3dHexBuilder.Type - Class in nxopen.cae
-
the hex mesh creation type
- Mesh3dHybridBuilder - Interface in nxopen.cae
-
- Mesh3dTetBuilder - Interface in nxopen.cae
-
- MESH_CONTROLS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls.
- MESH_CONTROLS_BOUNDARY_LAYER - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - boundary layer.
- MESH_CONTROLS_BOUNDING_VOLUME_DENSITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - bounding volume density.
- MESH_CONTROLS_CYLINDER_DENSITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - cylinder density.
- MESH_CONTROLS_EDGE_DENSITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - edge density.
- MESH_CONTROLS_FACE_DENSITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - face density.
- MESH_CONTROLS_FILLET_DENSITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - fillet density.
- MESH_CONTROLS_MAPPED_EDGE_DENSITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - mapped edge density.
- MESH_CONTROLS_MAPPED_HOLE_DENSITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - mapped hole density.
- MESH_CONTROLS_POINT_DENSITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - point density.
- MESH_CONTROLS_WELD_ROW_DENSITY - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh controls - weld row density.
- MESH_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- MESH_LEVEL_CHECK_PROJECTION - Static variable in class nxopen.cae.qualityaudit.Action.Id
-
the action listing projection errors at mesh level.
- MESH_MATING_CONDITION_INFO - Static variable in class nxopen.uf.UFSf.ScenarioInfo
-
- MESH_ONLY - Static variable in class nxopen.cae.FluidDomainBuilder.OutputOptionsType
-
The output type specified as only mesh genberation.
- MESH_POINT - Static variable in class nxopen.cae.SuppressHoleBuilder.OptionPointCreate
-
- MESH_POINTS - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide mesh points
- MESH_SMOOTHING_AREA - Static variable in class nxopen.cae.optimization.TBSGroupDefinition.DefinitionType
-
Defines a group refer to mesh smoothing area
- MESH_TRIANGLE_INTERSECTION - Static variable in class nxopen.tooling.RunSimulationBuilder.CollisionCheckOptions
-
Mesh facet body, check the mesh triangle intersection or not
- meshAssoErrorList - Variable in class nxopen.uf.UFSf.MeshErrorContainer
-
- meshAttemptMapping() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to attemp mapping for mesh elements.
- meshAttemptMapping() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the option to attemp mapping for mesh elements.
- meshCollector() - Method in interface nxopen.cae.Mesh
-
Returns the MeshCollector for this mesh.
- MeshCollector - Interface in nxopen.cae
-
Represents a MeshCollector.
- meshCollector() - Method in interface nxopen.cae.NodeElementInfoBuilder
-
Returns the mesh collector
License requirements: None.
- MeshCollectorBuilder - Interface in nxopen.cae
-
- MeshCollectorBuilder.ElementDimensionOption - Class in nxopen.cae
-
Indicates the different element dimensions
- MeshCollectorDisplayDefaults - Interface in nxopen.cae
-
Represents the base MeshCollectorDisplayDefaults class for Mesh, MeshCollector and
MeshCollectorOccurrence classes
This is an abstract class, and cannot be created.
- MeshCollectorDisplayDefaults0d - Interface in nxopen.cae
-
Represents 0d Mesh Display Settings
To obtain an instance of this class use
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
- MeshCollectorDisplayDefaults1d - Interface in nxopen.cae
-
Represents 1d Mesh Display Settings
To obtain an instance of this class use
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
- MeshCollectorDisplayDefaults2d - Interface in nxopen.cae
-
Represents 2d Mesh Display Settings
To obtain an instance of this class use
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
- MeshCollectorDisplayDefaults3d - Interface in nxopen.cae
-
Represents 3d Mesh Display Settings
To obtain an instance of this class use
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
- meshCollectorName() - Method in interface nxopen.cae.ElementModifyTypeBuilder
-
Returns the mesh collector name
License requirements: None.
- meshCollectorName() - Method in interface nxopen.cae.ElementRotateBuilder
-
Returns the name of the mesh collector which will hold the new elements
License requirements: None.
- meshCollectorName() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the name of the mesh collector which will hold the new elements
License requirements: None.
- MeshCollectorOccurrence - Interface in nxopen.cae
-
- MeshCollectorOccurrenceBuilder - Interface in nxopen.cae
-
- meshcolltypeSeed - Variable in class nxopen.cae.CaeGroupCollection.AutoGroupSeedNames
-
prefix seed name for auto groups grouped by mesh collector type
- meshColor() - Method in interface nxopen.cae.PostMesh
-
Returns the color index for the mesh id assigned to the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- meshContext() - Method in interface nxopen.cae.ThicknessBuilder
-
Returns the mesh in context
License requirements: None.
- MeshControl - Interface in nxopen.cae
-
Represents a MeshControl
To create or edit an instance of this class, use
MeshControlBuilder
Created in NX5.0.0
- MeshControlBuilder - Interface in nxopen.cae
-
- MeshControlBuilder.CylinderAxialElementSizeType - Class in nxopen.cae
-
the cylinder subtypes for size on axial direction.
- MeshControlBuilder.CylinderCircularSizeType - Class in nxopen.cae
-
the cylinder subtypes for size on circumference.
- MeshControlBuilder.FilletAxialElementSizeType - Class in nxopen.cae
-
the fillet subtypes for size on axial direction.
- MeshControlBuilder.FilletCircumferenceSizeType - Class in nxopen.cae
-
the fillet subtypes for size on circumference.
- MeshControlBuilder.FilletType - Class in nxopen.cae
-
the fillet subtypes.
- MeshControlBuilder.HeightDefinedByOption - Class in nxopen.cae
-
the height defined by options.
- MeshControlBuilder.ProgressionTypes - Class in nxopen.cae
-
the mesh control progression subtypes.
- MeshControlBuilder.SizeTypes - Class in nxopen.cae
-
the mesh control size subtypes.
- MeshControlBuilder.SizingType - Class in nxopen.cae
-
the sizing subtypes for weld row and mapped holes.
- MeshControlBuilder.Types - Class in nxopen.cae
-
the mesh control types
- MeshControlBuilder.WeldSide - Class in nxopen.cae
-
the mesh control weld row direction subtypes.
- MeshControlCollection - Interface in nxopen.cae
-
Provides methods for managing mesh controls
MeshControl
in a fem part
To obtain an instance of this class, refer to
BaseFEModel
Created in NX5.0.0
- MeshControlDisplayManager - Interface in nxopen.cae
-
Provides method for creating builder for
mesh control display operation commands in both sim and fem part
To obtain an instance of this class, refer to
CaePart
Created in NX5.0.0
- meshControlDisplayMgr() - Method in interface nxopen.cae.CaePart
-
Returns the mesh control display manager belonging to this IFem .
- MeshControlDisplayOptionsBuilder - Interface in nxopen.cae
-
- meshControls() - Method in interface nxopen.cae.BaseFEModel
-
Returns the mesh control collection belonging to this fem part .
- meshCount - Variable in class nxopen.uf.UFSf.LocateAllMeshesData
-
- meshCreateOption() - Method in interface nxopen.cae.Mesh0dBuilder
-
Returns the mesh creation option
License requirements: None.
- meshDefinitions() - Method in interface nxopen.cae.PostScenarioInputDefinition
-
- meshDensity() - Method in interface nxopen.cae.CAEConnectionBuilder
-
The mesh density setting
License requirements: nx_masterfem ("Finite Element Modeling")
.
- meshDensityType() - Method in interface nxopen.cae.CAEWeldConnectionBuilder
-
Returns the mesh density type
License requirements: None.
- meshDensityValue() - Method in interface nxopen.cae.CAEWeldConnectionBuilder
-
Returns the mesh density value
License requirements: None.
- meshDimension() - Method in interface nxopen.cae.PostMesh
-
Returns the dimension of the mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- MeshDisplaySettings - Interface in nxopen.cae
-
Represents the base MeshDisplaySettings class for Mesh class
This is an abstract class, and cannot be created.
- MeshDisplaySettings0d - Interface in nxopen.cae
-
Represents 0d Mesh Display Settings
To obtain an instance of this class use CAE::Mesh,
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
- MeshDisplaySettings1d - Interface in nxopen.cae
-
Represents 1d Mesh Display Settings
To obtain an instance of this class use CAE::Mesh,
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
- MeshDisplaySettings2d - Interface in nxopen.cae
-
Represents 2d Mesh Display Settings
To obtain an instance of this class use CAE::Mesh,
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
- MeshDisplaySettings3d - Interface in nxopen.cae
-
Represents 3d Mesh Display Settings
To obtain an instance of this class use CAE::Mesh,
CAE::MeshCollector, or CAE::MeshCollectorOccurrence classes
.
- MESHED_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide meshed polygon bodies
- meshElementSize() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the 2-D element size for mesh.
- meshElementSize() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the 2-D element size for mesh.
- meshElementType() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the 2-D mesh element type, either triangle or quadrate element.
- meshElementType() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the 2-D mesh element type, either triangle or quadrate element.
- MeshError() - Constructor for class nxopen.uf.UFSf.MeshError
-
- MeshError(Tag, UFSf.MeshErrorType) - Constructor for class nxopen.uf.UFSf.MeshError
-
- MeshErrorContainer() - Constructor for class nxopen.uf.UFSf.MeshErrorContainer
-
- MeshErrorContainer(UFSf.MeshErrorList, UFSf.MeshErrorList, UFSf.MeshErrorList, UFSf.MeshErrorList, UFSf.MeshErrorList, UFSf.MeshErrorList) - Constructor for class nxopen.uf.UFSf.MeshErrorContainer
-
- MeshErrorList() - Constructor for class nxopen.uf.UFSf.MeshErrorList
-
- MeshErrorList(int, UFSf.MeshError) - Constructor for class nxopen.uf.UFSf.MeshErrorList
-
- meshErrors - Variable in class nxopen.uf.UFSf.MeshErrorList
-
- MESHES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh types
- MeshesData() - Constructor for class nxopen.bodydes.OnestepUnformBuilder.MeshesData
-
- MeshFollower - Interface in nxopen.cae
-
Represents Mesh Recipe
This is an abstract class
.
- MeshFromBoundaryBuilder - Interface in nxopen.cae
-
- MeshFromBoundaryBuilder.LoopOption - Class in nxopen.cae
-
Type of loop
- MeshFromBoundaryBuilder.RailOption - Class in nxopen.cae
-
Type of rail
- meshGradation() - Method in interface nxopen.cae.Shell2SolidBuilder
-
Returns the mesh gradation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- meshIndividualFaces - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- meshItemsP - Variable in class nxopen.uf.UFSf.FindMeshData
-
- MeshLevelFailedElementCreationResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit MeshLevelFailedElementCreationResult is a class containing information about failed element creations on universal connections.
- MeshLevelFailedProjectionResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit MeshLevelFailedProjectionResult is a class containing information about failed projections on universal connections.
- MeshLevelFailedProjectionToleranceResult - Interface in nxopen.cae.qualityaudit
-
The Quality Audit MeshLevelFailedProjectionToleranceResult is a class containing information about mesh projections
that failed the tolerance criteria.
- MeshLevelProjectionCheck - Interface in nxopen.cae.qualityaudit
-
This action has as output the list of failed projections of the universal connections at mesh level.
- meshManager() - Method in interface nxopen.cae.IFEModel
-
Returns the IMeshManager
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- MeshManager - Interface in nxopen.cae
-
Creates Meshes
Mesh
in a fem part
Created in NX6.0.0
- MeshManagerOccurrence - Interface in nxopen.cae
-
Manages MeshOccurrencs and MeshCollectorOccurrences in a fem part
.
- MeshManualSweepBetweenListItemSelection - Interface in nxopen.cae
-
- MeshManualSweepBetweenListItemSelectionList - Interface in nxopen.cae
-
Represents a list of objects.
- MeshMate - Interface in nxopen.cae
-
Represents a Mesh Mate
.
- meshMateSize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the mesh mate size
License requirements: None.
- meshMatingOption() - Method in interface nxopen.cae.MMCCreateBuilder
-
Returns the mesh mating type
License requirements: None.
- meshMaxJacobian() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the maximum Jacobian for mesh elements.
- meshMaxJacobian() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the maximum Jacobian for mesh elements.
- meshMaxWarp() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the maximum warp for meshing.
- meshMaxWarp() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the maximum warp for meshing.
- meshMethod - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- meshName() - Method in interface nxopen.cae.ElementCreateBuilder
-
Returns the mesh name
License requirements: None.
- meshName() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the mesh name
License requirements: None.
- meshName() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the mesh name
License requirements: None.
- meshName() - Method in interface nxopen.cae.ElementReflectBuilder
-
Returns the mesh name
License requirements: None.
- meshName() - Method in interface nxopen.cae.ElementRevolveBuilder
-
Returns the mesh name
License requirements: None.
- meshName() - Method in interface nxopen.cae.ElementRotateBuilder
-
Returns the name of the mesh that will hold the new elements
License requirements: None.
- meshName() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the name of the mesh that will hold the new elements
License requirements: None.
- meshName() - Method in interface nxopen.cae.PrimitiveRecipeMeshBuilder
-
Returns the mesh object name.
- meshName() - Method in interface nxopen.cae.SpiderElementBuilder
-
Returns the mesh name
License requirements: None.
- meshObject() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Meshes the part.
- meshOption - Variable in class nxopen.uf.UFSf.EfConnInfo
-
- MeshParameterData - Interface in nxopen
-
Represents surface rebuild data structure.
- MeshParameterData.FeatureType - Class in nxopen
-
Mesh surface feature types.
- MeshParameterData.Type - Class in nxopen
-
Mesh parameters.
- meshPath() - Method in interface nxopen.cae.connections.ComponentData
-
Returns the mesh path
License requirements: None.
- MeshPoint - Interface in nxopen.cae
-
- MeshPointBaseBuilder - Interface in nxopen.cae
-
Represents a
MeshPointBaseBuilder
This is an abstract class and cannot be directly instantiated
Created in NX5.0.2
- MeshPointCollection - Interface in nxopen.cae
-
Provides methods for managing constraints
MeshPoint
in a sim part.
- MeshPointConicCenterBuilder - Interface in nxopen.cae
-
- meshPointer - Variable in class nxopen.uf.UFSf.LocateAllMeshesData
-
- MeshPointExistingPointBuilder - Interface in nxopen.cae
-
- MeshPointInsideVolumeBuilder - Interface in nxopen.cae
-
- MeshPointMultipleOnCurveBuilder - Interface in nxopen.cae
-
- MeshPointMultipleOnCurveBuilder.PlacementType - Class in nxopen.cae
-
the placement type types
- MeshPointOnCurveBuilder - Interface in nxopen.cae
-
- MeshPointOnFaceBuilder - Interface in nxopen.cae
-
- MeshPointProjectBuilder - Interface in nxopen.cae
-
- MeshPointProjectBuilder.ProjectionMethod - Class in nxopen.cae
-
the projection method types
- meshPoints() - Method in interface nxopen.cae.FemPart
-
Returns the meshpoint collector collection belonging to the part .
- meshPointToEdit() - Method in interface nxopen.cae.MeshPointBaseBuilder
-
Returns the base mesh point that will be replaced or edited after the commit operation (Edit Operation).
- MeshPreferencesData() - Constructor for class nxopen.cae.FemPart.MeshPreferencesData
-
- meshProcessFillet() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to process fillet for mesh element.
- meshProcessFillet() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the option to process fillet for mesh element.
- MeshProfileString - Interface in nxopen
-
- MeshProfileString.InsertOrder - Class in nxopen
-
Profile string insert orders.
- MeshProfileString.SelectedPoint - Class in nxopen
-
Mesh surface profile string point types.
- MeshProfileString.Type - Class in nxopen
-
Mesh surface profile string types.
- MeshProperties - Interface in nxopen.mfg.am
-
Represents a mesh properties builder
To obtain an instance of this class use JAX_MFG_AM_ApplicationManager_GetMeshProperties
Default values.
- meshRecipeErrorList - Variable in class nxopen.uf.UFSf.MeshErrorContainer
-
- meshRecipes - Variable in class nxopen.uf.UFSf.AutoCreateSurfaceContactMeshData
-
- MeshRefinementBuilder - Interface in nxopen.cae
-
- meshResolution() - Method in interface nxopen.mfg.am.MeshProperties
-
Returns the mesh resolution builder
License requirements: None.
- meshSelection() - Method in interface nxopen.cae.AttachElementsBuilder
-
Returns the selected mesh
License requirements: None.
- meshSelection() - Method in interface nxopen.cae.ElementModifyOrderBuilder
-
Returns the selected mesh(es)
License requirements: None.
- meshSelection() - Method in interface nxopen.cae.ElementModifyTypeBuilder
-
Returns the selected meshes
License requirements: None.
- meshSelection() - Method in interface nxopen.cae.NodeAssociationBuilder
-
Returns the selected mesh
License requirements: None.
- MeshShellFromSolid - Interface in nxopen.cae
-
Represents 2d Mesh that follows 3d mesh
To create or edit an instance of this class, use
SurfaceCoatBuilder
Created in NX7.5.0
- meshSizeFactor() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the factor that determine the mesh size when creating polygon face from mesh (for CATIA ply groups import only)
The NX suggested mesh size is multiplied with this factor
License requirements: None.
- meshSizeVariation() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the variation of mesh element size.
- meshSizeVariation() - Method in interface nxopen.cae.Shell2SolidBuilder
-
Returns the mesh size variation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- meshSizeVariation() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the variation of mesh element size.
- meshSmallFeature() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the value of small feature for mesh setting
License requirements: None.
- meshSmallFeature() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the value of small feature for mesh setting
License requirements: None.
- meshSmooth() - Method in interface nxopen.cae.optimization.TBSShapeOptimizationSolution
-
Returns the mesh smooth definition
License requirements: None.
- meshSmoothElements() - Method in interface nxopen.cae.optimization.TBSMeshSmooth
-
Returns the elements of mesh smooth
License requirements: None.
- meshSmoothStrategy() - Method in interface nxopen.cae.optimization.TBSMeshSmooth
-
Returns the strategy of mesh smooth
License requirements: None.
- meshSplitQuad() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the option to split quadrate element to triangle element when creating meshes.
- meshSplitQuad() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the option to split quadrate element to triangle element when creating meshes.
- MeshSurface - Interface in nxopen.features
-
Represents a mesh surface feature.
- MeshSurfaceBuilder - Interface in nxopen.features
-
Mesh Surface Builder class.
- MeshSurfaceBuilder.AngleAlignmentPointsData - Class in nxopen.features
-
- MeshSurfaceBuilder.ConstraintDirection - Class in nxopen.features
-
End face constraints direction.
- MeshSurfaceBuilder.ConstraintType - Class in nxopen.features
-
End face constraints types.
- MeshSurfaceBuilder.FaceConstraintCollectorsData - Class in nxopen.features
-
- MeshSurfaceBuilder.ProfilePointAlignmentData - Class in nxopen.features
-
- meshTopologyOption() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the option for setting the mesh topology used in the transformation or morphing calculations
License requirements: None.
- MeshTransformer - Interface in nxopen.features
-
Represents a mesh transformer feature
To create or edit an instance of this class, use
MeshTransformerBuilder
Created in NX10.0.0
- MeshTransformerBuilder - Interface in nxopen.features
-
- MeshTransformerBuilder.ContinuityType - Class in nxopen.features
-
Continuity type
- MeshTransformerBuilder.MeshTopologyType - Class in nxopen.features
-
Mesh topology option type
- MeshTransformerBuilder.SmoothingType - Class in nxopen.features
-
Smoothing option type
- MeshTransformerBuilder.StepCountValue - Class in nxopen.features
-
Step count enum value for converting to actual count number
- meshTransition - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- meshTransition - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- MeshVisuals() - Constructor for class nxopen.uf.UFSf.MeshVisuals
-
- MeshVisuals(int, int, int, int, int, int, int, int, int, int, int, double) - Constructor for class nxopen.uf.UFSf.MeshVisuals
-
- MESS_DENSITY - Static variable in class nxopen.cae.XyFunctionMeasure
-
mess density
- MESS_DENSITY_GCM3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Gram Per Cubic Centi Meter
- MESS_DENSITY_GMM3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Gram Per Cubic Milli Meter
- MESS_DENSITY_KG_M3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Kilogram Per Cubic Meter
- MESS_DENSITY_KG_MM3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Kilogram Per Cubic Milli Meter
- MESS_DENSITY_LBFSEC2IN4 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Pounds Second Squared Per Inch Fourth
- MESS_DENSITY_LBM_FT3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Pound Mass per Cubic Foot
- MESS_DENSITY_LBM_IN3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Pound Massper Cubic Inch
- MESS_DENSITY_MG_MM3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Mega Gram Per Cubic Milli Meter
- MESS_DENSITY_SLUG_FT3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Slugs Per Cubic Feet
- MESS_DENSITY_TM3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Tonne Per Cubic Meter
- MESS_DENSITY_TMM3 - Static variable in class nxopen.cae.XyFunctionUnit
-
Mess Density unit: Tonne Per Cubic Milli Meter
- message - Variable in class nxopen.uf.UFAssem.Prev16Align
-
- message - Variable in class nxopen.uf.UFPlot.BannerOptions
-
- message - Variable in class nxopen.uf.UFTurn.AskCutRegionOfIndexData
-
- message - Variable in class nxopen.uf.UFTurn.AskCutRegionsExistData
-
- message - Variable in class nxopen.uf.UFTurn.IpwBoxData
-
- message - Variable in class nxopen.uf.UFTurn.TeachmodeCreateSubopData
-
- MESSAGE_ERROR - Static variable in class nxopen.uf.UFUi.MessageDialogType
-
- MESSAGE_INFORMATION - Static variable in class nxopen.uf.UFUi.MessageDialogType
-
- MESSAGE_QUESTION - Static variable in class nxopen.uf.UFUi.MessageDialogType
-
- MESSAGE_WARNING - Static variable in class nxopen.uf.UFUi.MessageDialogType
-
- MessageButtons() - Constructor for class nxopen.uf.UFUi.MessageButtons
-
- MessageButtons(boolean, boolean, boolean, String, String, String, int, int, int) - Constructor for class nxopen.uf.UFUi.MessageButtons
-
- messageDialog(String, UFUi.MessageDialogType, String[], int, boolean, UFUi.MessageButtons) - Method in interface nxopen.uf.UFUi
-
- messages() - Method in interface nxopen.Step242Importer
-
Returns the message level for syslog messages when loading Step242 files
License requirements: None.
- messages - Variable in class nxopen.uf.UFAssem.ConvertPrev16AlignsData
-
- messagesInconsistentRevisions() - Method in interface nxopen.preferences.SessionPdm
-
Returns the kind of messages about inconsistent revisions when a part is loaded
License requirements: None.
- Metaform - Interface in nxopen.features
-
Represents a metaform feature
To create or edit an instance of this class, use
MetaformBuilder
Created in NX7.5.0
- MetaformBuilder - Interface in nxopen.features.sheetmetal
-
- METAL_BRUSHED1 - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Brushed Metal Reflection 1
- METAL_BRUSHED2 - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Brushed Metal Reflection 2
- METAL_GRATE - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.DeckingMaterialTypeAPI
-
- METAL_MINIMUM_POINT_DATUM_DISTANCE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
minimum point datum distance
- METAL_MINIMUM_POINT_MEASUREMENT_DISTANCE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
minimum point measurement distance
- METAL_SHINY1 - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Shiny Metal Reflection 1
- METAL_SHINY2 - Static variable in class nxopen.display.TrueShadingBuilder.EnvironmentMapType
-
Shiny Metal Reflection 2
- METAL_STACK_UP - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
metal stack up
- metallicPanelCompressivePlasticityCurveBc1(double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Metallic panel compressive plasticity curve BC1
Curves for finding critical buckling stress / secant yield stress F0.7
Used for finding 'sigma_cr' the inelastic buckling strength of metallic flat rectangular plate in compression.
- MetallicPanelCompressivePlasticityCurveBc1Data() - Constructor for class nxopen.cae.aerostructures.author.ABB.MetallicPanelCompressivePlasticityCurveBc1Data
-
- metallicPanelCompressivePlasticityCurveBc2(double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Metallic panel compressive plasticity curve BC2
Curves for finding critical inter-rivet buckling stress (or critical wrinkling stress) / secant yield stress F0.7
Used for finding 'Fir' or 'Fw'.
- MetallicPanelCompressivePlasticityCurveBc2Data() - Constructor for class nxopen.cae.aerostructures.author.ABB.MetallicPanelCompressivePlasticityCurveBc2Data
-
- metallicPanelCompressivePlasticityCurveBc3(double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Metallic panel compressive plasticity curve BC3
Curves for finding critical buckling stress / secant yield stress F0.7
Used for finding 'sigma_cr' the inelastic buckling strength of metallic cylinder in compression.
- MetallicPanelCompressivePlasticityCurveBc3Data() - Constructor for class nxopen.cae.aerostructures.author.ABB.MetallicPanelCompressivePlasticityCurveBc3Data
-
- METALS - Static variable in class nxopen.PhysicalMaterial.Category
-
Metals
- metalThickness() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the expression containing the sheet metal thickness value.
- metalThickness - Variable in class nxopen.uf.UFDie.AskMaterialPropertiesData
-
- metaSolutionName() - Method in interface nxopen.cae.DurabilityMetaSolutionBuilder
-
Returns the meta solution name.
- metaSolutions() - Method in interface nxopen.cae.DurabilityManager
-
Returns the durability metasolution collection belonging to this sim part.
- METER - Static variable in class nxopen.uf.UFModl.Units
-
- METER_KILOGRAM_F - Static variable in class nxopen.motion.FlexBodyBuilder.UnitSystemType
-
(kgf)(m)(kgf-s^2/m)
- METER_NEWTON - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
-
Load unit = "N", Moment unit N-m
- METER_NEWTON - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
-
Load unit = "N", Moment unit N-m
- METER_NEWTON - Static variable in class nxopen.motion.FlexBodyBuilder.UnitSystemType
-
(N)(m)(kg)
- METERS - Static variable in class nxopen.annotations.DimensionUnit
-
Specified meters units
- METERS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
-
Use meters
- METERS - Static variable in class nxopen.facet.STLImportBuilder.STLFileUnitsTypes
-
- METERS - Static variable in class nxopen.features.BodyByEquationBuilder.StlFileUnitTypes
-
STL unit is meters.
- METERS - Static variable in class nxopen.STLImporter.FileUnitsType
-
STL file is in units of meters.
- METERS - Static variable in class nxopen.uf.UFDrf.LinearUnits
-
- METERS - Static variable in class nxopen.VRMLImporter.FileUnitsType
-
VRML file is in units of meters.
- method() - Method in interface nxopen.ame.PlcMethodBuilder
-
Returns the method
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- METHOD - Static variable in class nxopen.ame.PlcRule.Type
-
- METHOD - Static variable in class nxopen.ame.PortBuilder.Type
-
- method() - Method in interface nxopen.annotations.DimensionMeasurementBuilder
-
Returns the measurement method for the size of the dimension
License requirements: None.
- method() - Method in interface nxopen.annotations.DimensionSetBuilder
-
Returns the dimension set method
License requirements: None.
- method() - Method in interface nxopen.cae.ElementConnectivityBuilder
-
Returns an element modification method.
- method() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the method to be used for translating the selected elements
License requirements: None.
- method() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
Returns the method
License requirements: None.
- method() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
Returns the offset method
License requirements: None.
- METHOD - Static variable in class nxopen.cam.CAMSession.ObjectSubtype
-
Machining Method
- method() - Method in interface nxopen.cam.InPathEventDataBuilder
-
Returns the Inpath Events Location method
License requirements: cam_base ("CAM BASE")
.
- Method - Interface in nxopen.cam
-
Represents a Method Group
To create or edit an instance of this class, use
MethodBuilder
Created in NX7.5.0
- method() - Method in interface nxopen.cam.ToolAxisChange
-
Returns the tool axis change method
License requirements: None.
- Method - Class in nxopen.diagramming
-
the zone method
- method() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the type of methods to create the zones.
- method() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the type of method to display like Standard/Custom
License requirements: None.
- method() - Method in interface nxopen.die.AddSurfBuilder
-
Returns the addendum surface output method.
- method() - Method in interface nxopen.display.NonProportionalZoom
-
Returns the type of mouse interaction used to define the non-proportional zoom.
- method() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- Method - Class in nxopen.drawings
-
the zone method
- method() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the method
License requirements: None.
- method() - Method in interface nxopen.features.ChamferBuilder
-
Returns the offset method.
- method() - Method in interface nxopen.features.OffsetEdgeBuilder
-
Returns the method for offset edge
License requirements: None.
- method() - Method in interface nxopen.features.shipdesign.InverseBendingLinesBuilder
-
Returns the method used to calculate the number and spacing of the curves on the profile.
- method() - Method in interface nxopen.features.VariableOffsetBuilder
-
Returns the offset method
License requirements: None.
- method - Variable in class nxopen.FollowFilletRule.Data
-
Selection Intent method
- method() - Method in interface nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder
-
Returns the method
License requirements: None.
- method() - Method in interface nxopen.geometricutilities.SpineDefinitionBuilder
-
Returns the method
License requirements: None.
- method - Variable in class nxopen.HumanReachZone.Data
-
Method used to create the reach zone
- method() - Method in interface nxopen.IPlane
-
Returns a plane type
License requirements: None.
- method() - Method in interface nxopen.layout2d.CreateComponentFrom3DBuilder
-
Returns the method to utilize in create Component from 3D
License requirements: None.
- method() - Method in interface nxopen.mechanicalrouting.BendCornerTypeBuilder
-
Returns the bend corner methods
License requirements: routing_base ("Routing Basic")
.
- method() - Method in interface nxopen.ModelingViewHighQualityImage
-
Returns the method to use for the generation of the High Quality Image.
- method() - Method in interface nxopen.motion.LinkCouplerBuilder
-
Returns the method
License requirements: mechanisms ("MECHANISMS")
.
- Method - Class in nxopen.routing
-
Available application methods for Overstock Applications for a given Overstock
- method - Variable in class nxopen.routing.SplinePathBuilder.OffsetData
-
The type of offset object.
0 = Not Offset,
1 = Stock Offset Point,
2 = Stock Offset Surface.
- method - Variable in class nxopen.uf.UFCurve.BridgeData
-
- method - Variable in class nxopen.uf.UFModl.MethodList
-
- method - Variable in class nxopen.uf.UFModl.SmholeData
-
- method - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- method - Variable in class nxopen.uf.UFSo.SplineData
-
- method - Variable in class nxopen.uf.UFUi.SelectRoutingObjectsData
-
- method() - Method in interface nxopen.weld.GrooveBuilder
-
- method() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the method for creating skip welds
License requirements: ugweld ("UG WELD")
.
- METHOD_AUTOMATIC - Static variable in class nxopen.cam.DmBndBuilder.BndPatternCenterTypes
-
Automatic
- METHOD_SPECIFY - Static variable in class nxopen.cam.DmBndBuilder.BndPatternCenterTypes
-
Specify
- MethodBuilder - Interface in nxopen.cam
-
Represents a Method Builder
This is an abstract class, and cannot be instantiated.
- methodChoice() - Method in interface nxopen.cae.PreTestExciterConfigBuilder
-
Returns the exciter selection method
License requirements: None.
- methodData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- methodEnum() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the construction method to be used
License requirements: None.
- methodkey() - Method in interface nxopen.cae.aerostructures.MarginCalculationBuilder
-
Returns the MethodKey
License requirements: nx_masterfem ("Finite Element Modeling")
.
- MethodLibrary - Interface in nxopen.cae.aerostructures.author
-
- MethodLibrary.Callback - Interface in nxopen.cae.aerostructures.author
-
Callback type
- MethodLibraryFactory - Class in nxopen.cae.aerostructures.author
-
- MethodLibraryFactory() - Constructor for class nxopen.cae.aerostructures.author.MethodLibraryFactory
-
- MethodList() - Constructor for class nxopen.uf.UFModl.MethodList
-
- MethodList(int, int, Tag, double[], UFModl.StringList) - Constructor for class nxopen.uf.UFModl.MethodList
-
- methodName() - Method in interface nxopen.ame.PlcMethodBuilder
-
Returns the code/data block name
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- methodOption() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the method option
License requirements: None.
- methodOption() - Method in interface nxopen.cae.ElementProjectBuilder
-
Returns the method option
License requirements: None.
- methodOption() - Method in interface nxopen.cae.NodeProjectBuilder
-
Returns the method option
License requirements: None.
- methodOption() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the method option
License requirements: None.
- methodType() - Method in interface nxopen.cae.BeamSectionOrientationOptions
-
Returns the orientation definition method
License requirements: None.
- methodType() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the method type for point-point or node-node connections
License requirements: None.
- methodType() - Method in interface nxopen.cae.ShipMeshAutomationBuilder
-
Returns the method type of creating mesh elements
License requirements: nx_masterfem ("Finite Element Modeling"), nx_ship_basic ("Ship Basic Design")
.
- methodType() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the method feature type
License requirements: None.
- methodType() - Method in interface nxopen.display.SelPref
-
Returns the method type
License requirements: None.
- methodType() - Method in interface nxopen.motion.JointDefine
-
Returns the method type of a screw joint
License requirements: None.
- methodType() - Method in interface nxopen.tooling.MoldInsertBuilder
-
Returns the method type
License requirements: None.
- methodUsed - Variable in class nxopen.weld.WeldPointExitBuilder.FeatureInfo
-
the method used to create the feature
- METRIC - Static variable in class nxopen.cam.CAMSetup.OutputUnits
-
use metric as output unit
- METRIC - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Metric
- METRIC - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Metric
- METRIC - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Metric
- METRIC - Static variable in class nxopen.CGMBuilder.UnitsOption
-
Metric units
- METRIC - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetUnits
-
a Metric units drawing sheet
- METRIC - Static variable in class nxopen.DxfdwgImporter.UnitsEnum
-
units millimeters
- METRIC - Static variable in class nxopen.PlotBuilder.UnitsOption
-
Metric
- METRIC - Static variable in class nxopen.PrintPDFBuilder.UnitsOption
-
Metric
- METRIC - Static variable in class nxopen.uf.UFConstants
-
- METRIC_BASE - Static variable in class nxopen.cae.XyFunctionUnitSystem
-
the Metric Base unit
- METRIC_CAE_BASE - Static variable in class nxopen.cae.XyFunctionUnitSystem
-
the Metric CAE Base
- METRIC_SIZE - Static variable in class nxopen.uf.UFDraw.SizeState
-
- metricNominalDecimalPlaces() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the number of decimal places for the nominal value of a metric dimension.
- metricScale() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the Metric drawing scale
License requirements: None.
- metricSheetTemplateLocation() - Method in interface nxopen.drawings.DrawingSheetBuilder
-
Returns the location of the metric drawing sheet template to be added to the part file
License requirements: None.
- metricToleranceDecimalPlaces() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the number of decimal places for the metric tolerance value of a dimension.
- MEZZANINE - Static variable in class nxopen.linedesigner.PlatformEquipmentBuilder.TypeAPI
-
- MF_CHANGE_STATUS - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_CLOSE_DEBUG_FILES - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_COUNTER_VALUE - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_CUT_LEVEL_PLANE - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_DISPLAY_FONT - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_DUMP_BUFFERS - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_FILLET_PARAMS - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_FINAL_DEPARTURE_OUTPUT - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_GOUGE - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_HIGHLIGHT - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_LAST_CLSF_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_LIST_DELETION - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_LOCAL_RETURN_END - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_LOCAL_RETURN_START - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_MESSAGE - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_MSYS - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_OPERATION_NAME - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_OUTPUT_GOHOME - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_SLOWDOWN_PARAMS - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_START_OF_FILLET - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_TLDATA - Static variable in class nxopen.cam.ToolpathEventType
-
- MF_UNPROPAGABLE_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- mfgFeatureGroup() - Method in interface nxopen.features.shipdesign.DvToMvMappingBuilder
-
Returns the mfg feature group.
- MfgModelManager - Interface in nxopen.mfgmodel
-
Represents the manager for Mfg model
Use the static method in this class to obtain an instance.
- mfm() - Method in interface nxopen.UFSession
-
- MG - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepMassUnitType
-
Mass unit of megagram
- MG - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
MG: Meter (kilogram f)
- MG_MESHDIR_DONT_REVERSE - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
-
- MG_MESHDIR_FROM_END - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
-
- MG_MESHDIR_FROM_START - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
-
- MG_MESHDIR_REVERSE - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
-
- MG_MESHDIR_UNDEFINED - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
-
- MG_MESHDIR_UNINITIALIZED - Static variable in class nxopen.uf.UFSf.MeshGeomMeshdir
-
- MHZ - Static variable in class nxopen.cae.LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum
-
- MI - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepLengthUnitType
-
Length unit of miles
- MICKEY - Static variable in class nxopen.tooling.CornerDesignBuilder.CornerTypeOpt
-
mickey
- MICKEY - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.BottomPlateSlugItems
-
Bottom plate slug type is mickey
- MICKEY - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateThreeSlugType
-
- MICKEY - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DiePlateTwoSlugType
-
- MICKEY - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieShoeSlugTypeItems
-
Die shoe slug type is mickey
- MICKEY - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalBbpslugType
-
Bottom plate slug type is mickey
- MICKEY - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalDsslugType
-
Die shoe slug type is mickey
- MICKEY - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalBottomBackingPlateSlugType
-
Bottom backing plate slug type is mickey
- MICKEY - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalDieShoeSlugType
-
Die shoe slug type is mickey
- MICRON - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepLengthUnitType
-
Length unit of micrometer
- Microposition - Interface in nxopen.blockstyler
-
Represents a Microposition block .
- micropositioningScale - Variable in class nxopen.features.subdivision.CageManipulatorData.ObjectMoveData
-
The micropositioning scale.
- MID - Static variable in class nxopen.cae.Post.DisplayColorSchemeType
-
- MID - Static variable in class nxopen.InferSnapType.SnapType
-
Snap point mid
- MID_CENTER - Static variable in class nxopen.annotations.AlignmentPosition
-
- MID_CENTER - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Mid center position
- MID_CENTER - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Mid center
- MID_EYE_POINT - Static variable in class nxopen.HumanData.EditDisplayBodyParts
-
Indicate edit display body parts named mid eye point
- MID_LEFT - Static variable in class nxopen.annotations.AlignmentPosition
-
- MID_LEFT - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Mid left position
- MID_LEFT - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Mid left
- MID_PLANE - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.FeatureType
-
Mid Plane alignment feature type
- MID_PLANE_CUT - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.CutTypeOptions
-
- MID_POINT - Static variable in class nxopen.cam.NcmSubopBuilder.DefaultRegionStartTypes
-
start at mid point
- MID_POINT - Static variable in class nxopen.weld.EasyPatternBuilder.HemMethodTypes
-
Use the mid point of a section cut.
- MID_PRNCPL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TensorType
-
- MID_RIGHT - Static variable in class nxopen.annotations.AlignmentPosition
-
- MID_RIGHT - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Mid right position
- MID_RIGHT - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Mid right
- MID_VERTEX - Static variable in class nxopen.Sketch.ConstraintPointType
-
The mid vertex of a line or an arc
- MID_VERTEX - Static variable in class nxopen.uf.UFSket.GeomVertex
-
- MIDDLE - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align middle
- MIDDLE - Static variable in class nxopen.annotations.LeaderAlignment
-
- MIDDLE - Static variable in class nxopen.annotations.StackHorizontalAlignment
-
Align horizontally along middle line of text box
- MIDDLE - Static variable in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
-
- MIDDLE - Static variable in class nxopen.annotations.TextWithSymbolsBuilder.SymbolAlignmentType
-
Middle
- MIDDLE - Static variable in class nxopen.annotations.VerticalTextJustification
-
- MIDDLE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Surface
-
Onestep solver will not offset middle surface
- MIDDLE - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.ShellRegionEnum
-
Middle
- MIDDLE - Static variable in class nxopen.cae.optimization.Hookes
-
Deprecated.
Middle
- MIDDLE - Static variable in class nxopen.cae.optimization.TBSLoadCase.LayerOption
-
Mid-layer of shell
- MIDDLE - Static variable in class nxopen.cae.responsesimulation.DataLocation.Shell
-
- MIDDLE - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalShellLocation
-
Middle layer
- MIDDLE - Static variable in class nxopen.cae.responsesimulation.ShellElementEvaluationLocation
-
- MIDDLE - Static variable in class nxopen.cae.Result.Section
-
- MIDDLE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Creates a point, plane or line at the middle of two sub features
- MIDDLE - Static variable in class nxopen.diagramming.LeaderLineBuilder.VerticalAlignmentOption
-
Setting the vertical alignment middle
- MIDDLE - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.Surface
-
Onestep solver will not offset middle surface
- MIDDLE - Static variable in class nxopen.features.ShelfBuilder.Types
-
- MIDDLE - Static variable in class nxopen.features.StepBuilder.StepLocations
-
Step is located on middle of two boudary curves
- MIDDLE - Static variable in class nxopen.features.StepBuilder.StepTypes
-
Adds a step between two boundary curves
- MIDDLE - Static variable in class nxopen.features.vehicledesign.OilPanBuilder.PositionType
-
- middle() - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
Returns the middle data range value.
- MIDDLE - Static variable in class nxopen.linedesigner.GateFeatureBuilder.GateOpeningStyle
-
- MIDDLE - Static variable in class nxopen.linedesigner.RailOpeningFeatureBuilder.GateOpeningStyle
-
- MIDDLE - Static variable in class nxopen.routing.OverstockBuilder.PointType
-
Middle
- MIDDLE - Static variable in class nxopen.routing.PointDefinition
-
The point defines the middle of the overstock application.
- MIDDLE - Static variable in class nxopen.uf.UFCurve.EndType
-
- MIDDLE - Static variable in class nxopen.weld.JointExitBuilder.Positions
-
the middle position
- MIDDLE_BASE_DATA - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- MIDDLE_CENTER - Static variable in class nxopen.ame.SymbolAnnotationBuilder.Anchor
-
- MIDDLE_CENTER - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
middle center
- MIDDLE_CENTER - Static variable in class nxopen.diagramming.tables.ContentAlignment
-
Middle center content alignment
- MIDDLE_CENTER - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
middle center
- MIDDLE_CENTER - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in middle center of text box
- MIDDLE_CENTER - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Middle center position
- MIDDLE_CENTER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in middle center of text box
- MIDDLE_CENTER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text with the given position in middle center of text box
- MIDDLE_LEFT - Static variable in class nxopen.ame.SymbolAnnotationBuilder.Anchor
-
- MIDDLE_LEFT - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
middle left
- MIDDLE_LEFT - Static variable in class nxopen.diagramming.tables.ContentAlignment
-
Middle left content alignment
- MIDDLE_LEFT - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
middle left
- MIDDLE_LEFT - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in the middle left of the text box
- MIDDLE_LEFT - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Middle left position
- MIDDLE_LEFT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in the middle left of the text box
- MIDDLE_LEFT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text with the given position in the middle left of the text box
- MIDDLE_OF_CURVE - Static variable in class nxopen.weld.WeldSpacingCalcMethod
-
spaces based on middle of curve
- MIDDLE_PRINCIPAL - Static variable in class nxopen.cae.Result.Component
-
- MIDDLE_RIGHT - Static variable in class nxopen.ame.SymbolAnnotationBuilder.Anchor
-
- MIDDLE_RIGHT - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
middle right
- MIDDLE_RIGHT - Static variable in class nxopen.diagramming.tables.ContentAlignment
-
Middle right content alignment
- MIDDLE_RIGHT - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
middle right
- MIDDLE_RIGHT - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in middle right of text box
- MIDDLE_RIGHT - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Middle right position
- MIDDLE_RIGHT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in middle right of text box
- MIDDLE_RIGHT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text with the given position in middle right of text box
- MIDDLE_VEHICLE - Static variable in class nxopen.features.vehicledesign.PendulumPlacementBuilder.PositionMethodType
-
- MIDDLECENTER - Static variable in class nxopen.uf.UFDisp.TextRef
-
- middleFaceCollector() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the middle face collector get
License requirements: None.
- middleFaceNormFlag() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the middle face set normal reversal flag
License requirements: None.
- middleHoleData() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the target body
License requirements: None.
- MiddleHoleData - Interface in nxopen.geometricutilities
-
- MIDDLELEFT - Static variable in class nxopen.uf.UFDisp.TextRef
-
- middleNode() - Method in interface nxopen.geometricutilities.NonInflectingLawBuilder
-
Returns the middle node
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- middlePlane() - Method in interface nxopen.cae.optimization.TBSCastCondition
-
Returns the middle plane
License requirements: None.
- middlePlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the middle plane option that determines whether to create middle plane or not.
- middlePlanePoint() - Method in interface nxopen.cae.optimization.TBSCastCondition
-
- MIDDLERIGHT - Static variable in class nxopen.uf.UFDisp.TextRef
-
- middleScale() - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
Returns the middle value scale for data range.
- midInferredConstraint() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the mid inferred constraint
License requirements: None.
- midnode() - Method in interface nxopen.cae.BoltBuilder
-
Returns the option to include midnodes for creating spider elements
License requirements: None.
- midNode() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the mid node option
License requirements: None.
- MIDNODE - Static variable in class nxopen.cae.ElementModifyOrderBuilder.Operation
-
changes the midnode option for a parabolic mesh to mixed, curved or linear
- midNodeMove() - Method in interface nxopen.cae.NodeAlignBuilder
-
Returns the mid node move
License requirements: None.
- midNodeOption() - Method in interface nxopen.cae.MappedMeshBuilder
-
Returns the mid node opt
License requirements: None.
- midnodeOption - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- midnodeOption - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- midNodes - Variable in class nxopen.uf.UFSf.AskElementEdgesData
-
- midnodes - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- midnodeType() - Method in interface nxopen.cae.ElementModifyOrderBuilder
-
Returns the midnode option
License requirements: None.
- midPlane() - Method in interface nxopen.features.vehicledesign.VisionPlaneBuilder
-
Returns the middle plane inclined angle; means front side,passenger side and driver side are the same.
- MIDPLANE - Static variable in class nxopen.motion.BodyContactLms.ForceModelType
-
- MIDPOINT - Static variable in class nxopen.cam.ProbeCalibrateStylusMoveBuilder.Depth
-
Midpoint of cylinder
- MIDPOINT - Static variable in class nxopen.cam.ProbeInspectBorebossMoveBuilder.Depth
-
Midpoint of cylinder
- midPoint() - Method in interface nxopen.features.AssociativeArcBuilder
-
- midpoint() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the midpoint infer-constraint setting.
- MIDPOINT - Static variable in class nxopen.Sketch.AssocType
-
The midpoint of a curve
- MIDPOINT - Static variable in class nxopen.Sketch.ConstraintType
-
- MIDPOINT - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- midpoint - Variable in class nxopen.uf.UFBound.MemberData
-
- MIDPOINT - Static variable in class nxopen.uf.UFSket.ConType
-
- MidPointInformationData() - Constructor for class nxopen.weld.WeldJointBuilder.MidPointInformationData
-
- midPointOfOverstock() - Method in interface nxopen.routing.OverstockApplication
-
Returns the mid point of overstock on the path.
- midPointOptions() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the mid point options
License requirements: None.
- midPointReference() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the mid point reference
License requirements: None.
- midpt(double[], double[]) - Method in interface nxopen.uf.UFVec2
-
- midpt(double[], double[]) - Method in interface nxopen.uf.UFVec3
-
- midReferenceCsys() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the mid reference coordinate system
License requirements: None.
- mids() - Method in interface nxopen.cae.ResultVariable
-
Returns the MIDs
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- midship() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the position value of midship along the X axis.
- midsrfFeatureObjId - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
-
- midsrfType - Variable in class nxopen.uf.UFSf.IsMidsrfData
-
- MidsrfUserParms() - Constructor for class nxopen.uf.UFSf.MidsrfUserParms
-
- MidsrfUserParms(Tag, int, Tag[], double, double) - Constructor for class nxopen.uf.UFSf.MidsrfUserParms
-
- MIDSURF_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
-
- MIDSURFACE_POLYGON_BODIES - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide midsurface polygon bodies
- MidSurfaceByFacePairs - Interface in nxopen.features
-
Represents a mid surface by face pairs feature
To create or edit an instance of this class, use
MidSurfaceByFacePairsBuilder
Created in NX7.5.0
- MidSurfaceByFacePairsBuilder - Interface in nxopen.features
-
- MidSurfaceByFacePairsBuilder.PairingStrategyType - Class in nxopen.features
-
pairing strategy
- MidSurfaceByFacePairsBuilder.SurfaceType - Class in nxopen.features
-
midsurface options
- MidSurfaceByFacePairsBuilder.TrimmingOptionType - Class in nxopen.features
-
trimming options
- MidSurfaceFacePair - Interface in nxopen.features
-
Represents a mid surface by face pairs feature
This is an abstract class
.
- midsurfaceSheetBody - Variable in class nxopen.uf.UFModeling.AskFacepairParmsData
-
- MidSurfaceUserDefined - Interface in nxopen.features
-
Represents a midsurface user defined feature
To create or edit an instance of this class, use
MidSurfaceUserDefinedBuilder
Created in NX7.5.0
- MidSurfaceUserDefinedBuilder - Interface in nxopen.features
-
- midTangent() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the mid tangent - point can be passed in SELECT_OBJECT which is used in case of multiple solutions
License requirements: None.
- midThicknessColor() - Method in interface nxopen.cae.ThicknessBuilder
-
Returns the mid thickness color
License requirements: None.
- midValue - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- midValueDistance - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- midValueMax - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- midValueMean - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- midValueMin - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- midValueNormal - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- midValueSec - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- midValueSlope - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- midValueU - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- midValueV - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- MigratedPanelBuilder - Interface in nxopen.features.sheetmetal
-
Represents an I-DEAS Migrated Panel feature builder
This builder cannot be instantiated separately.
- migrateLegacyLineWidths() - Method in interface nxopen.preferences.PartObject
-
Migrates line width attributes stored in the part file to
corresponding new line widths.
- Mil98Report() - Constructor for class nxopen.routing.BendReportManager.Mil98Report
-
- Mil98Report(double, double, double, double, double) - Constructor for class nxopen.routing.BendReportManager.Mil98Report
-
Constructor for the Mil98Report object.
- MILL - Static variable in class nxopen.cam.ConvertFromMCDBuilder.MachineTypes
-
- MILL - Static variable in class nxopen.cam.Tool.Types
-
Milling tool
- MILL - Static variable in class nxopen.sim.MachineToolConfiguration.TechnologyTypes
-
The mill technology type
- MILL10 - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
-
10-Parameter
- MILL10 - Static variable in class nxopen.cam.Tool.Subtypes
-
Milling tool-10 parameters
- MILL5 - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
-
5-Parameter
- MILL5 - Static variable in class nxopen.cam.Tool.Subtypes
-
Milling tool-5 parameters
- MILL7 - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
-
7-Parameter
- MILL7 - Static variable in class nxopen.cam.Tool.Subtypes
-
Milling tool-7 parameters
- MILL_BALL - Static variable in class nxopen.cam.MillToolBuilder.CutterSubtypes
-
Ball MillTool
- MILL_BALL - Static variable in class nxopen.cam.Tool.Subtypes
-
Milling tool-Ball mill
- MILL_CHAMFER - Static variable in class nxopen.cam.Tool.Subtypes
-
Milling chamfer mill
- MILL_FORM - Static variable in class nxopen.cam.Tool.Types
-
User defined mill tool
- MILL_SPHERICAL - Static variable in class nxopen.cam.Tool.Subtypes
-
Milling spherical mill
- MILL_TURN - Static variable in class nxopen.cam.ConvertFromMCDBuilder.MachineTypes
-
- MillAreaGeomBuilder - Interface in nxopen.cam
-
- MillBoundaryGeomBuilder - Interface in nxopen.cam
-
- MillCutParameters - Interface in nxopen.cam
-
- MillFormToolBuilder - Interface in nxopen.cam
-
- MillGeomBuilder - Interface in nxopen.cam
-
- MILLI_MILLINEWTON - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
-
Load unit = "mN", Moment unit N-mm
- MILLI_MILLINEWTON - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
-
Load unit = "mN", Moment unit N-mm
- MILLI_NEWTON - Static variable in class nxopen.cae.FreeBodyResultsBuilder.OutputUnits
-
Load unit = "N", Moment unit N-mm
- MILLI_NEWTON - Static variable in class nxopen.cae.MechanicalLoadSumBuilder.UserUnit
-
Load unit = "N", Moment unit N-mm
- MILLIMETER - Static variable in class nxopen.tooling.InitProjectBuilder.UnitId
-
metric project
- MILLIMETER_KILOGRAM_F - Static variable in class nxopen.motion.FlexBodyBuilder.UnitSystemType
-
(kgf)(mm)(kgf-s^2/mm)
- MILLIMETER_MILLINEWTON - Static variable in class nxopen.motion.FlexBodyBuilder.UnitSystemType
-
(mN)(mm)(kg)
- MILLIMETER_NEWTON - Static variable in class nxopen.motion.FlexBodyBuilder.UnitSystemType
-
(N)(mm)(tonne)
- MILLIMETERS - Static variable in class nxopen.annotations.DimensionUnit
-
Specifies millimeters units
- MILLIMETERS - Static variable in class nxopen.ASCImporter.Units
-
Millimeters Selection
- MILLIMETERS - Static variable in class nxopen.BasePart.Units
-
- MILLIMETERS - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.LinearUnitsOptions
-
Use millimeters
- MILLIMETERS - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageUnitsType
-
static image size specified in millimeters
- MILLIMETERS - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageUnitsType
-
static image size specified in millimeters
- MILLIMETERS - Static variable in class nxopen.drawings.DrawingSheet.Unit
-
- MILLIMETERS - Static variable in class nxopen.facet.STLImportBuilder.STLFileUnitsTypes
-
- MILLIMETERS - Static variable in class nxopen.features.BodyByEquationBuilder.StlFileUnitTypes
-
STL unit is millimeters.
- MILLIMETERS - Static variable in class nxopen.linedesigner.InsertSheetBuilder.APIUnits
-
Represents the Millimeters type
- MILLIMETERS - Static variable in class nxopen.Part.Units
-
- MILLIMETERS - Static variable in class nxopen.preferences.RoutingPath.RadiusUnits
-
Use metric (mm) units
- MILLIMETERS - Static variable in class nxopen.STLImporter.FileUnitsType
-
STL file is in units of millimeters.
- MILLIMETERS - Static variable in class nxopen.uf.UFCgm.Units
-
- MILLIMETERS - Static variable in class nxopen.uf.UFDrf.LinearUnits
-
- MILLIMETERS - Static variable in class nxopen.uf.UFPlot.Units
-
- MILLIMETERS - Static variable in class nxopen.VRMLImporter.FileUnitsType
-
VRML file is in units of millimeters.
- MILLINEWTON_MILLIMETER - Static variable in class nxopen.cae.DurSpecialistDataSources.UnitSystem
-
mN mm kg
- MILLING - Static variable in class nxopen.sim.KinematicChain.Types
-
Milling
- MillingToolBuilder - Interface in nxopen.cam
-
Represents a MillingTool Builder
This is an abstract class, and cannot be instantiated.
- MillingToolBuilder.ToolDirectionTypes - Class in nxopen.cam
-
Available types for tool direction milling tool
- millingTrackpointBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the mill trackpoint builder
License requirements: cam_base ("CAM BASE")
.
- MillingTrackpointBuilder - Interface in nxopen.cam
-
Represents a Milling Trackpoint Builder .
- MillingTrackpointBuilder.AddData - Class in nxopen.cam
-
- MillingTrackpointBuilder.CalculateDistanceData - Class in nxopen.cam
-
- MillingTrackpointBuilder.Data - Class in nxopen.cam
-
- MillingTrackpointBuilder.TrackPointData - Class in nxopen.cam
-
- MillingTrackpointBuilder.Types - Class in nxopen.cam
-
the definition enum .
- MILLIONTH - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest millionth
- MillMachineControl - Interface in nxopen.cam
-
Represents a Mill Machine Control operation
To create or edit an instance of this class, use
MillMachineControlBuilder
Created in NX7.5.0
- MillMachineControlBuilder - Interface in nxopen.cam
-
- MillMethodBuilder - Interface in nxopen.cam
-
- MillOperation - Interface in nxopen.cam
-
Represents a Mill operation
To create or edit an instance of this class, use
MillOperationBuilder
Created in NX7.5.0
- MillOperationBuilder - Interface in nxopen.cam
-
Represents a MillOperation Builder
This is an abstract class and cannot be instantiated.
- MillOperationBuilder.WallCleanupTypes - Class in nxopen.cam
-
the wall cleanup modes .
- MillOrientGeomBuilder - Interface in nxopen.cam
-
- MillOrientGeomBuilder.LowerLimitModes - Class in nxopen.cam
-
The lower limit mode options .
- millPocketLocation() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the mill pocket location
License requirements: None.
- millPocketNumber() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the mill pocket number
License requirements: None.
- MillTextGeomBuilder - Interface in nxopen.cam
-
- MillToolBuilder - Interface in nxopen.cam
-
- MillToolBuilder.CutterSubtypes - Class in nxopen.cam
-
Available types for mill tool subtype
- MillToolProbing - Interface in nxopen.cam
-
Represents a Mill Tool operation
To create or edit an instance of this class, use
MillToolProbingBuilder
Created in NX8.5.1
- MillToolProbingBuilder - Interface in nxopen.cam
-
- MILLTURN - Static variable in class nxopen.sim.MachineToolConfiguration.TechnologyTypes
-
The millturn technology type
- MillUserDefined - Interface in nxopen.cam
-
Represents a Mill User Defined operation
To create or edit an instance of this class, use
MillUserDefinedBuilder
Created in NX7.5.0
- MillUserDefinedBuilder - Interface in nxopen.cam
-
- MillVolumeGeomBuilder - Interface in nxopen.cam
-
- MIMIC - Static variable in class nxopen.JtCreator.FileStructure
-
MIMIC
- mimimumNumberPointsOnOverlap() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the mimimum number points to create on an overlap sheet
License requirements: None.
- mimimumValue() - Method in interface nxopen.report.DoubleArgument
-
Returns the minimum value.
- MIN - Static variable in class nxopen.cae.LaminateGraphicalReportBuilder.EnvelopeRule
-
Keep minimum values
- MIN - Static variable in class nxopen.cae.LaminateQuickReportBuilder.EnvelopeRule
-
Keep minimum values
- MIN - Static variable in class nxopen.cae.LaminateSpreadsheetReportBuilder.EnvelopeRule
-
Keep minimum values
- MIN - Static variable in class nxopen.cae.optimization.TBSBaseDesignVariableBuilder.GroupOperator
-
Minimum value of the selection area
- MIN - Static variable in class nxopen.cae.PostAnnotationBuilder.Type
-
- min - Variable in class nxopen.cae.ResultAccess.AskMinMaxLocationData
-
- min - Variable in class nxopen.cae.ResultAccess.AskNMinMaxLocationData
-
- min() - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
Returns the minimum data range.
- min - Variable in class nxopen.uf.UFMotion.JointLimits
-
- min - Variable in class nxopen.uf.UFSim.AskAxisLimitsData
-
- MIN_CLEARANCE - Static variable in class nxopen.MeasureDistanceBuilder.MeasureType
-
- MIN_CLEARANCE - Static variable in class nxopen.MeasureManager.ProjectionType
-
- MIN_DIAMETER - Static variable in class nxopen.cam.ChamferMillingBuilder.ChamferReferenceType
-
reference to min (Hole) diameter
- MIN_DIST - Static variable in class nxopen.preferences.RoutingPath.ChainMethod
-
Chain with minimum path length
- MIN_MAC - Static variable in class nxopen.cae.PreTestSensorConfigBuilder.AlgorithmChoiceType
-
- MIN_PRINCIPAL - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- MIN_PRINCIPLE - Static variable in class nxopen.cae.responsesimulation.StrengthStressCriteria
-
- MIN_PRNCPL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TensorType
-
- minAngle() - Method in interface nxopen.cam.TurnCornerControl
-
Returns the minimum angle
License requirements: None.
- minAngle() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the lower limit of a valid trim angle
License requirements: None.
- minAngleFoldedFacets() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the minimum angle between adjacent facets to define folded facets
License requirements: None.
- minAngleToggle() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns a value indicating whether elements are to be split based on Minimum Angle.
- minAngleValue() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns a threshold minimum angle value.
- minBarLength() - Method in interface nxopen.cae.connections.Element
-
Returns the min bar length.
- minBendRadius() - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Returns the min bend radius of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- minBoringDiameterBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the min. boring diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
Created in NX5.0.0
- minBoringDiameterToggle() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the min. boring diameter toggle
License requirements: None.
- minClearance() - Method in interface nxopen.cam.NcmHoleMachiningEngRet
-
Returns the engage/retract min clearance builder
License requirements: None.
- minClearance() - Method in interface nxopen.cam.PlungeMillingBuilder
-
- minClearanceBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract min clearance builder
License requirements: None.
- minCompensationFactor() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the minimum compensation factor.
- minCorner - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxAlignedData
-
- minCorner - Variable in class nxopen.uf.UFModlGeneral.AskBoundingBoxExactData
-
- mincornerpt - Variable in class nxopen.display.DynamicSectionBuilder.BoundingBoxData
-
- MinCutDepth - Interface in nxopen.cam
-
- minCutDepth() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the min cut depth
License requirements: None.
- MinCutDepth.Types - Class in nxopen.cam
-
the mininmum cut depth options .
- minCutLength() - Method in interface nxopen.cam.MillOperationBuilder
-
Returns the min cut length builder (tool dependent double)
License requirements: None.
- MinCutLength - Interface in nxopen.cam
-
- minCutLength() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the min cut length
License requirements: None.
- MinCutLength.Types - Class in nxopen.cam
-
the mininmum cut length options .
- minCutLengthBuilder() - Method in interface nxopen.cam.FlowBuilder
-
Returns the flow min cut length
License requirements: None.
- minCutVolume() - Method in interface nxopen.cam.MillCutParameters
-
Returns the minimum cut volume
License requirements: None.
- MinCutVolume - Interface in nxopen.cam
-
- minDampingStatus() - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
-
Returns the minimum damping ratio status
License requirements: nx_response_anlys ("NX Response Analysis")
.
- minDist - Variable in class nxopen.uf.UFModeling.AskMinimumDist2Data
-
- minDist - Variable in class nxopen.uf.UFModeling.AskMinimumDist3Data
-
- minDist - Variable in class nxopen.uf.UFModeling.AskMinimumDistData
-
- minDist - Variable in class nxopen.uf.UFSf.AskClosestPointData
-
- minDist - Variable in class nxopen.uf.UFSf.FindMinimumDistanceData
-
- minElemThickness() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder
-
Returns the relative minimum thickness for a corner node ply element.
- minFacingDiameterBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the min. facing diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
Created in NX5.0.0
- minFacingDiameterToggle() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the min. facing diameter toggle
License requirements: None.
- minHolderClearance() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- minHolderClearance() - Method in interface nxopen.cam.ToolPathTiltClearance
-
Returns the minimum holder clearance
License requirements: None.
- minid - Variable in class nxopen.cae.ResultAccess.AskMinMaxLocationData
-
- minid - Variable in class nxopen.cae.ResultAccess.AskNMinMaxLocationData
-
- MINIMAL_LOAD_VISUALIZE - Static variable in class nxopen.LoadOptions.LoadOption
-
reserved for future use
- minimalRadius() - Method in interface nxopen.tooling.BlendCurve3DBuilder
-
Returns the minimal radius of the corner to blend.
- minimalSegmentLength() - Method in interface nxopen.ame.GeneralConnectionSettingsBuilder
-
Returns the minimal segment length setting
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- MINIMIZE_BACKDRAFT - Static variable in class nxopen.tooling.DieEngDefineProductOrientationBuilder.OptimalMethod
-
- MINIMIZE_DRAW_DEPTH - Static variable in class nxopen.tooling.DieEngDefineProductOrientationBuilder.OptimalMethod
-
- MINIMIZE_POINTS - Static variable in class nxopen.cam.NcmSmoothingBuilder.SmoothToleranceSources
-
minimize points tolerance type
- MINIMIZE_TRAVEL - Static variable in class nxopen.cam.ParamBuilder.OptimizationTypes
-
minimize travel
- minimizeNumberOfEngages() - Method in interface nxopen.cam.MillCutParameters
-
Returns the minimize number of engages toggle
License requirements: None.
- minImprovement() - Method in interface nxopen.cae.ModelUpdateOptimOptionsBuilder
-
Returns the minimum improvement
License requirements: None.
- MINIMUM - Static variable in class nxopen.cae.AxiSymmetricParameters.EnvVal
-
- MINIMUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.EnvelopeValue
-
- MINIMUM - Static variable in class nxopen.cae.CyclicSymmetricParameters.Value
-
- MINIMUM - Static variable in class nxopen.cae.optimization.Goal
-
Minimum value
- MINIMUM - Static variable in class nxopen.cae.optimization.Hookes
-
Deprecated.
Minimum
- MINIMUM - Static variable in class nxopen.cae.optimization.TBSLoadCase.LayerOption
-
the minimum value among Top, Middle and Bottom
- MINIMUM - Static variable in class nxopen.cae.optimization.TBSLoadCaseManager.SelectionType
-
Minimum value of the selected load cases
- MINIMUM - Static variable in class nxopen.cae.optimization.TBSObjectives.ObjectiveType
-
Target is to minimize the list of design response
- MINIMUM - Static variable in class nxopen.cae.optimization.TBSShapeOptimizationParameters.DisplacementStepsize
-
Minimum displacement stepsize
- MINIMUM - Static variable in class nxopen.cae.Post.NodeValueSharingCriterion
-
- MINIMUM - Static variable in class nxopen.cae.Post.ValueSharingCriterion
-
- MINIMUM - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
-
- MINIMUM - Static variable in class nxopen.cae.PostGraphBuilder.GeometryValue
-
- MINIMUM - Static variable in class nxopen.cae.PostGraphBuilder.NodalCombination
-
- MINIMUM - Static variable in class nxopen.cae.Result.ComputationType
-
minimum value at the node
- MINIMUM - Static variable in class nxopen.cae.Result.ElementValueCriterion
-
- MINIMUM - Static variable in class nxopen.cae.Result.Section
-
- MINIMUM - Static variable in class nxopen.cae.ResultMeasure.Operation
-
Evaluate for the minimum value
- MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
-
- MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossIterations
-
- MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.GeometryValue
-
- MINIMUM - Static variable in class nxopen.cae.ResultProbeBuilder.NodalCombination
-
- MINIMUM - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.Operation
-
- MINIMUM - Static variable in class nxopen.cae.ResultsManipulationBuilder.ElementValueAtNode
-
- MINIMUM - Static variable in class nxopen.cae.SimBcPlotContoursBuilder.ResolveOverlapType
-
- MINIMUM - Static variable in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
-
- minimum() - Method in interface nxopen.cam.ContourAngle
-
Returns the minimum face angle
License requirements: None.
- MINIMUM - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Finds the maximum feature measurement point in a specified direction
- MINIMUM - Static variable in class nxopen.features.BridgeCurveBuilder.MinRadiusTypes
-
Deprecated.
regular
- MINIMUM - Static variable in class nxopen.features.BridgeCurveBuilderEx.RadiusConstraintMethods
-
Minimum radius
- MINIMUM - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendRadiusConstraintType
-
Minimum radius constraint
- MINIMUM - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
-
- MINIMUM - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MinMaxType
-
Minimum
- MINIMUM - Static variable in class nxopen.geometricanalysis.FaceCurvatureAnalysisBuilder.CurvatureTypes
-
Minimum
- MINIMUM - Static variable in class nxopen.geometricanalysis.RadiusAnalysisBuilder.Types
-
Minimum radius.
- MINIMUM - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.LabelTypes
-
Minimum
- MINIMUM - Static variable in class nxopen.MeasureDistanceBuilder.MeasureType
-
- MINIMUM - Static variable in class nxopen.MeasureManager.MeasureType
-
- MINIMUM - Static variable in class nxopen.MeasureManager.ProjectionType
-
- MINIMUM - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationTargetType
-
Target is minimum value of design objective
- MINIMUM_ABSOLUTE_PRINCIPAL_STRESS - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Absolute value of the minimum principal Stress
- MINIMUM_AND_MAXIMUM - Static variable in class nxopen.cae.Post.Marker
-
- MINIMUM_ANGLE - Static variable in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
-
show minimum
angle deviation
- MINIMUM_ANGLE - Static variable in class nxopen.Measurement.DeviationReportType
-
Minimum Angle
- MINIMUM_BOUNDED - Static variable in class nxopen.features.IFormBuilder.BSurfaceExtractionOptions
-
Extract minimum bounded surface
- MINIMUM_BOUNDED - Static variable in class nxopen.features.StudioXformBuilderEx.ExtrationMethodType
-
Extract minimum bounded surface
- MINIMUM_BOX - Static variable in class nxopen.cam.CutParametersSimplifyShapesTypes
-
minumum box
- MINIMUM_CLEARANCE - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes
-
Minimum Clearance
- MINIMUM_CURVATURE - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes
-
Use an initial value method and march along the minimum curvature at each subsequent location.
- MINIMUM_DEVIATION - Static variable in class nxopen.cam.InspectionMethodBuilder.CylinderFittingTypes
-
Minimum Deviation
- MINIMUM_DEVIATION3D - Static variable in class nxopen.cam.InspectionMethodBuilder.SurfaceProfileTypes
-
Minimum Deviation - 3D
- MINIMUM_DEVIATION_NORMAL - Static variable in class nxopen.cam.InspectionMethodBuilder.SurfaceProfileTypes
-
Minimum Deviation - Normal
- MINIMUM_DISTANCE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeMethodType
-
Represents using the minimum distance
- MINIMUM_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
-
- MINIMUM_DISTANCE - Static variable in class nxopen.geometricanalysis.DeviationChecking.DeviationOptions
-
show
minimum distance deviation
- MINIMUM_DISTANCE - Static variable in class nxopen.Measurement.DeviationReportType
-
Minimum Distance
- MINIMUM_DISTANCE - Static variable in class nxopen.motion.PackagingMeasureBuilder.MeasureType
-
Measure minimum distance between objects.
- MINIMUM_DISTANCE - Static variable in class nxopen.weld.JointmarkGuideBuilder.SpaceOption
-
Uniformly space points using a minimum distance value.
- MINIMUM_EDGE_DISTANCE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
minimum edge distance
- MINIMUM_INPLANE_STRESS - Static variable in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StressTypeName
-
Display minimum in-plane stress.
- MINIMUM_KINETIC_ENERGY - Static variable in class nxopen.motion.LmsSolverProperty.DynamicInitialVelocityMethods
-
- MINIMUM_MAGNITUDE - Static variable in class nxopen.cae.AfuMathOperation.Overall
-
Gets minimum magnitude values of AFU records
- MINIMUM_MAXIMUM - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepLabelValueEnum
-
- MINIMUM_MAXIMUM - Static variable in class nxopen.geometricutilities.CombOptionsBuilder.LabelTypes
-
Minimum and Maximum
- MINIMUM_ONLY - Static variable in class nxopen.cae.Post.Marker
-
- MINIMUM_POINT_DISTANCE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
minimum point distance
- MINIMUM_PRINCIPAL - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressTypeEnum
-
Minimum Principal
- MINIMUM_PRINCIPAL - Static variable in class nxopen.cae.Result.Component
-
- MINIMUM_PRINCIPLE - Static variable in class nxopen.uf.UFSf.DursolStressType
-
- MINIMUM_SIZE - Static variable in class nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder.CheckTypeOption
-
Definition of minimum structural diameter
- MINIMUM_SMART_DISTANCE - Static variable in class nxopen.GenericMeasure.Type
-
- MINIMUM_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
-
- MINIMUM_VALUE - Static variable in class nxopen.cae.AfuMathOperation.Overall
-
Gets minimum values of AFU records
- MINIMUM_VALUE - Static variable in class nxopen.cae.xyplot.AnchorType
-
the position of the point which has minimum value in a record display
- minimumAngle() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the minimum angle that defines the minimal angle of the triangles that result from the smoothing
and data reduction.
- minimumAngle() - Method in interface nxopen.cam.Cutcom
-
Returns the cutter compensation minimum angle
License requirements: None.
- minimumAngle() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Minimum Angle
License requirements: None.
- minimumAngleFoldedFacets() - Method in interface nxopen.facet.ConvertFacetBodyBuilder
-
Returns the minimum angle between adjacent facets to define folded facets.
- minimumAngleFoldedFacets() - Method in interface nxopen.facet.STLImportBuilder
-
Returns the value for minimum angle between adjacent facets to define folded facets.
- minimumArea() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Minimum Area type
License requirements: None.
- minimumArea() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
Returns the value indicating area of the smallest facet that is to be retained.
- minimumAreaSize() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Minimum Area Size
License requirements: None.
- minimumAreaUnit() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Minimum Area Unit
License requirements: None.
- minimumAverage() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the variable average minimum value
License requirements: None.
- minimumAverageBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the variable average minimum builder
License requirements: None.
- minimumBorderLength() - Method in interface nxopen.facet.FeatureExtractionBuilder
-
Returns the minimum border length
License requirements: None.
- minimumCavityDepth() - Method in interface nxopen.die.RotorSectionBuilder
-
Returns the throat minimum cavity depth of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
- minimumCheckingAllowableRatio() - Method in interface nxopen.routing.SplinePathBuilder
-
Returns the minimum ratio allowed for this spline
License requirements: routing_base ("Routing Basic")
.
- minimumCheckingAllowableValue() - Method in interface nxopen.routing.SplinePathBuilder
-
Returns the minimum radius allowed for this spline.
- minimumCheckingMethod() - Method in interface nxopen.routing.SplinePathBuilder
-
Returns the minimum checking method for this spline.
- minimumClearance() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the minimum clearance
License requirements: None.
- minimumClearance() - Method in interface nxopen.routing.DuctReinforcementBuilder
-
Returns the minimum clearance value for duct reinforcement
It defines the minimum distance from the beginning and end of the path to place the
first and last piece of reinforcement stock.
- minimumClearanceBuilder() - Method in interface nxopen.cam.NcmTurnThreadBuilder
-
Returns the Minimum Clearance
License requirements: None.
- minimumComponentsForLargeAssemblyOption() - Method in interface nxopen.preferences.PartDrafting
-
Returns the minimum number of components for large assembly option to get enabled
License requirements: None.
- minimumCornerAngle() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the minimum corner angle.
- minimumCutLength() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
Returns the minimum cut length builder
License requirements: None.
- minimumDegree() - Method in interface nxopen.geometricutilities.CurveFitData
-
Returns the minimum degree
License requirements: None.
- minimumDepth() - Method in interface nxopen.cam.CutLevelPlanar
-
Returns the minimum depth
License requirements: None.
- MINIMUMDISTANCE - Static variable in class nxopen.cae.ContactMeshBuilder.AlignmentType
-
- minimumDistance() - Method in interface nxopen.cae.qualityaudit.MinimumDistanceSettings
-
Returns the minimum distance required.
- minimumDistance() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the Minimum Distance
License requirements: None.
- minimumDistance() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the minimum distance between the adjacent blanks.
- minimumDistance - Variable in class nxopen.uf.UFBound.AllData
-
- MinimumDistanceData() - Constructor for class nxopen.Measurement.MinimumDistanceData
-
- MinimumDistanceSettings - Interface in nxopen.cae.qualityaudit
-
- minimumDistanceToGeometry() - Method in interface nxopen.drafting.AutomationPreferencesBuilder
-
Returns the minimum distance to geometry
License requirements: None.
- minimumDraftAngle() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the minimum draft angle.
- minimumDY() - Method in interface nxopen.Hyperbola
-
Returns the minimum DY width.
- minimumDY() - Method in interface nxopen.Parabola
-
Returns the minimum DY width.
- minimumEdgeLength() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the max edge length
License requirements: None.
- minimumElementSize() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the minimum element size.
- minimumElementSize() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Returns the minimum element size
License requirements: None.
- minimumElementSizeOption() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the minimum element size option.
- minimumExtensionLength() - Method in interface nxopen.die.RotorSectionBuilder
-
Returns the throat minimum extension length of the die rotor casting
License requirements: ug_die_design ("Die Design")
.
- minimumFaceAngle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- minimumFaceAngle - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- minimumFacetLength - Variable in class nxopen.uf.UFMotion.StlParameters
-
- minimumFacetNumber() - Method in interface nxopen.facet.STLImportBuilder
-
Returns the value for minimum number of facets for a STL file to be imported
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- minimumFeatureLength - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- minimumFlangeWidth() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the minimum flange width.
- minimumFlangeWidth() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the value used to control when only one surface measurement vector will be created.
- minimumGapBetweenAnnotations() - Method in interface nxopen.drafting.AutomationRuleBuilder
-
Returns the minimum gap between annotations
License requirements: None.
- minimumGapToGeometry() - Method in interface nxopen.drafting.AutomationRuleBuilder
-
Returns the minimum gap from the view geometry to the annotation
License requirements: None.
- minimumGValue() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the Minimum G value
License requirements: None.
- minimumHeelClearanceDistance() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Minimum Heel Clearance Distance
License requirements: None.
- minimumHeight() - Method in interface nxopen.blockstyler.ListBox
-
Returns the MinimumHeight
License requirements: None.
- minimumHeight() - Method in interface nxopen.blockstyler.MultilineString
-
Returns the MinimumHeight
License requirements: None.
- minimumHeight() - Method in interface nxopen.blockstyler.SetList
-
Returns the MinimumHeight
License requirements: None.
- minimumHeight() - Method in interface nxopen.blockstyler.Tree
-
Returns the MinimumHeight
License requirements: None.
- minimumHelixDiameter() - Method in interface nxopen.cam.CylinderMillingBuilder
-
Returns the Minimum Helix Diameter
License requirements: None.
- minimumHoleDiameter() - Method in interface nxopen.cam.DrillBackCountersinkTool
-
Returns the Minimum Hole Diameter defines the minimum diameter of the hole which the tool can pass through
License requirements: None.
- minimumLeadAngle() - Method in interface nxopen.cam.InterpolateVector
-
Returns the minimum lead angle
License requirements: None.
- minimumLeadAngle() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the minimum lead angle
License requirements: None.
- minimumLeadAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Minimum the Lead Angle
License requirements: None.
- minimumLength() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the minimum length
License requirements: None.
- minimumLevel() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Minimum Level
License requirements: None.
- minimumLoopAngle() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the minimum loop angle
License requirements: None.
- minimumLoopAngle() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the minimum loop angle
License requirements: None.
- minimumMove() - Method in interface nxopen.cam.Cutcom
-
Returns the cutter compensation minimum move builder (inheritable tool dep)
License requirements: None.
- minimumNegative() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the minimum negative trim angle.
- minimumNumberOfAttributeGroupsAllowed() - Method in interface nxopen.pdm.AttributeGroupDescription
-
Returns the minimum number of attribute groups of this type that can be assigned to an object.
- minimumNumberOfPoints() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the minimum number of points
License requirements: None.
- minimumoffset - Variable in class nxopen.display.DynamicSectionBuilder.OffsetLimitsData
-
Minimum offset
- MinimumOrthogonalDistanceData() - Constructor for class nxopen.Measurement.MinimumOrthogonalDistanceData
-
- minimumPathLength() - Method in interface nxopen.routing.electrical.Connection
-
Returns the minimum path length for this connection.
- minimumPercentBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the minimum percent of remaining
License requirements: None.
- minimumPitch() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the minimum pitch
License requirements: None.
- minimumPitchField() - Method in interface nxopen.drawings.ThreadsViewStyle
-
Returns the minimum pitch field.
- minimumPitchField() - Method in interface nxopen.preferences.ThreadsViewPreferences
-
Returns the minimum pitch field.
- minimumPitchFieldData() - Method in interface nxopen.drawings.ViewStyleThreadsBuilder
-
Returns the minimum pitch field on the THREADS tab of the View Style Dialog
License requirements: None.
- minimumPosition() - Method in interface nxopen.mechatronics.AngularLimitJointBuilder
-
Returns the minimum position:
The minimum allowable angle, stops objects moving too close together.
- minimumPosition() - Method in interface nxopen.mechatronics.LinearLimitJointBuilder
-
Returns the minimum position.
- minimumRadius() - Method in interface nxopen.cam.DPMTubeBuilder
-
Returns the minimum radius builder
License requirements: None.
- minimumRadius() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the minimum radius
License requirements: None.
- minimumRadius() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the minimum radius
License requirements: None.
- minimumRadius() - Method in interface nxopen.cam.NCAssistantBuilder
-
Returns the Minimum Radius
License requirements: None.
- minimumRadius() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the minimum radius.
- minimumRadius() - Method in interface nxopen.facet.AdjustMinimumRadiusBuilder
-
Returns the minimum radius of curvature
License requirements: None.
- minimumRadius() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the min radius
License requirements: None.
- minimumRadius() - Method in interface nxopen.tooling.PunchInsertBuilder
-
Returns the minimum radius
License requirements: None.
- minimumRadiusMode() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the minimum radius mode
License requirements: None.
- minimumRadiusMode() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the minimum radius mode
License requirements: None.
- minimumRadiusOption() - Method in interface nxopen.features.BridgeCurveBuilder
-
- minimumRadiusPoint() - Method in interface nxopen.cam.InspectionPolarGridBuilder
-
Returns the minimum radius point
License requirements: None.
- minimumRadiusValue() - Method in interface nxopen.features.BridgeCurveBuilder
-
- minimumRandomAngle() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the minimum random angle.
- minimumRibHeight() - Method in interface nxopen.die.KeywayBuilder
-
Returns the expression for the minimum rib height
License requirements: None.
- minimumRibHeight() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the minimum rib height of the keyway.
- minimumRibHeight() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the minimum rib height of keyways.
- minimumSegmentLength() - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
Returns the minimum segment length.
- minimumSizeAxial() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Minimum Size Axial
License requirements: None.
- minimumSizeMode() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Minimum Size Mode
License requirements: None.
- minimumSizeRadial() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Minimum Size Radial
License requirements: None.
- minimumSmallEdgeLength() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the minimum small edge length.
- minimumSpaceSize() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the option to report minimum space size or not.
- minimumSpaceSizeValue() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the minimum distance between the adjacent blanks.
- minimumSpacing() - Method in interface nxopen.cam.InspectionCurveFeatureBuilder
-
Returns the minimum spacing
License requirements: None.
- minimumSpacingBetweenPoints() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the minimum spacing between points
License requirements: None.
- minimumSubtendedAngle() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the minimum subtended angle
License requirements: None.
- minimumThickness() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
-
Returns the minimum thickness of the structure
License requirements: None.
- minimumTiltAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Minimum Tilt Angle
License requirements: None.
- minimumToolClearance() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns
the Minimum tool clearance expression.
- minimumToolClearance() - Method in interface nxopen.features.sheetmetal.DimpleBuilder
-
Returns
the minimum tool clearance expression.
- minimumToolClearance() - Method in interface nxopen.features.sheetmetal.DrawnCutoutBuilder
-
Returns
the minimum tool clearance expression.
- minimumToolClearance() - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Returns
the minimum tool clearance expression.
- minimumTrimLedge() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the minimum trim ledge.
- minimumValue() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the MinimumValue
License requirements: None.
- minimumValue() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the MinimumValue
License requirements: None.
- minimumValue() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the MinimumValue
License requirements: None.
- minimumValue() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the MinimumValue
License requirements: None.
- minimumValue() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the MinimumValue
License requirements: None.
- minimumValue() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the MinimumValue
License requirements: None.
- minimumValue() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the MinimumValue
License requirements: None.
- minimumValue - Variable in class nxopen.fields.FieldVariable.Bounds
-
minimum bound value
- minimumValue() - Method in interface nxopen.report.IntegerArgument
-
Returns the minimum value.
- minimumWallThickness() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the minimum wall thickness
License requirements: None.
- minimumWidth() - Method in interface nxopen.blockstyler.Tree
-
Returns the MinimumWidth
License requirements: None.
- minimumXDimension() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the minimum x dimension of product body
License requirements: None.
- minimumXDimension() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the minimum x dimension of product body
License requirements: None.
- minimumYDimension() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the minimum y dimension of product body
License requirements: None.
- minimumYDimension() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the minimum y dimension of product body
License requirements: None.
- minimumZDimension() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the minimum z dimension of product body
License requirements: None.
- minimumZDimension() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the minimum z dimension of product body
License requirements: None.
- minIncludedAngleQuadToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- minIncludedAngleQuadValue - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- minIncludedAngleTriaToggle - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- minIncludedAngleTriaValue - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- minInclusive() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the MinInclusive
License requirements: None.
- minInclusive() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the MinInclusive
License requirements: None.
- minInclusive() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the MinInclusive
License requirements: None.
- minInclusive() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the MinInclusive
License requirements: None.
- minInclusive() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the MinInclusive
License requirements: None.
- minInclusive() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the MinInclusive
License requirements: None.
- minInclusive() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the MinInclusive
License requirements: None.
- minInteger() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the min integer.
- minLabel() - Method in interface nxopen.cae.LaminateRelabelPliesBuilder
-
Returns the start label for the label and increment option
License requirements: None.
- minLength() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the min length in substring comparison.
- minMaterialThickness() - Method in interface nxopen.cam.MillCutParameters
-
Returns the minimum material thickness
License requirements: None.
- MINMAX - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MinMaxType
-
Minimum/Maximum
- MINMAX - Static variable in class nxopen.geometricutilities.TransitionLawNodeBuilder.TransitionType
-
Minimum-Maximum type transition
- minMaxOption() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the min_max type
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- minMeanRange() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder
-
Returns the min mean range
License requirements: None.
- minNeckClearance() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- minNeckClearance() - Method in interface nxopen.cam.ToolPathTiltClearance
-
Returns the minimum neck clearance
License requirements: None.
- minNumber() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the min number.
- minor - Variable in class nxopen.uf.UFEval.Ellipse
-
- MINOR_ANGULAR_DIM - Static variable in class nxopen.Sketch.ConstraintType
-
- MINOR_AXIS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamXYZAxis
-
Minor Axis
- MINOR_DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- MinorAngularDimension - Interface in nxopen.annotations
-
- MinorAngularDimensionBuilder - Interface in nxopen.annotations
-
- minorDia - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- minorDiameter() - Method in interface nxopen.cam.HoleBossSet
-
Returns the Minor Diameter
License requirements: None.
- minorDiameter - Variable in class nxopen.uf.UFModlGeneral.AskTorusParmsData
-
- minorLinesPerMajor() - Method in interface nxopen.display.GridBuilder
-
Returns the minor lines per major
License requirements: None.
- minorLinesPerMajor - Variable in class nxopen.preferences.WorkPlane.GridSize
-
Number of minor lines between major grid lines
- minorLineStyle() - Method in interface nxopen.display.GridBuilder
-
Returns the minor line style
License requirements: None.
- minorLineWeight() - Method in interface nxopen.display.GridBuilder
-
Returns the minor line weight
License requirements: None.
- minorPoint() - Method in interface nxopen.SketchEllipseBuilder
-
Returns the point in minor axis to calculate the minor radius
License requirements: None.
- minorRadius() - Method in interface nxopen.cam.InspectionTorusFeatureBuilder
-
Returns the minor radius of the torus
License requirements: None.
- minorRadius() - Method in interface nxopen.Ellipse
-
Returns the minor radius.
- minorradius - Variable in class nxopen.Ellipse.ParametersData
-
- minorRadius - Variable in class nxopen.facet.FacetedEdge.CurveData
-
- minorradius - Variable in class nxopen.markup.Ellipse.CenterAndRadiusData
-
- minorRadius() - Method in interface nxopen.SketchEllipseBuilder
-
Returns the minor radius
License requirements: None.
- minorRevision - Variable in class nxopen.uf.UFPs.KernelVersion
-
- minpoint - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
the points on the interference region at the extremes of depth
- minpoint - Variable in class nxopen.tooling.StockSizeBuilder.CalculateBoxSizeData
-
- minPower() - Method in interface nxopen.cam.LaserTool
-
Returns the Minimum Power
License requirements: None.
- minRad() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the minimum radius to blend sharp corners
License requirements: None.
- minRadius() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the MinRadius
License requirements: None.
- minradius - Variable in class nxopen.features.ConcaveFacesBuilder.CalculatePointCurvatureData
-
the minimum value of targeted face
- minRampLength() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the min ramp length
License requirements: None.
- minRampLengthBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
Returns the engage/retract minimum ramp length builder (inheritable tool dep)
License requirements: None.
- minSafeClearance() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- minShankClearance() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- minShankClearance() - Method in interface nxopen.cam.ToolPathTiltClearance
-
Returns the minimum shank clearance
License requirements: None.
- minSimulationTime() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the minimum simulation time
License requirements: None.
- minSpacing() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the minimum spacing between scan points
License requirements: None.
- minSpacing() - Method in interface nxopen.cam.InspectionScanCurve5AxisBuilder
-
Returns the Minimum Spacing of points along the Scan Curve
License requirements: None.
- minSpacing() - Method in interface nxopen.cam.InspectionScanCurveBuilder
-
Returns the Minimum Spacing of points along the Scan Curve
License requirements: None.
- minString() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the min string.
- minsubid - Variable in class nxopen.cae.ResultAccess.AskMinMaxLocationData
-
- minsubid - Variable in class nxopen.cae.ResultAccess.AskNMinMaxLocationData
-
- minThickness() - Method in interface nxopen.features.MidSurfaceUserDefinedBuilder
-
Returns the min element thickness allowed during Fem solve
License requirements: None.
- minTiltAngle() - Method in interface nxopen.cam.ToolPathTiltMachine
-
Returns the minimum tilt angle
License requirements: None.
- minToggle() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the min toggle
License requirements: None.
- minToolAxisChange() - Method in interface nxopen.cam.ToolAxisChange
-
Returns the minimum tool axis change
License requirements: None.
- minToolLen(CAMObject[]) - Method in interface nxopen.cam.CAMSetup
-
Minimum tool length
License requirements: cam_base ("CAM BASE")
.
- minTraverseDistance() - Method in interface nxopen.cam.AcrossVoids
-
Returns the minimum traversal distance
License requirements: cam_base ("CAM BASE")
.
- MINUS - Static variable in class nxopen.features.shipdesign.DeckListItemBuilder.DatumDir
-
- MINUS_LIMIT2LINES - Static variable in class nxopen.annotations.SearchCriteriaSurfaceFinishBuilder.ToleranceTypeOptions
-
- limit 2 lines
- MINUS_LIMIT_ONE_LINE - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Minus limit one line
- MINUS_LIMIT_ONE_LINE - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
MinusLimitOneLine
- MINUS_LIMIT_TWO_LINES - Static variable in class nxopen.annotations.BaseSurfaceFinishBuilder.ToleranceOption
-
Minus limit two lines
- MINUS_LIMIT_TWO_LINES - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.ToleranceTypes
-
MinusLimitTwoLines
- MINUS_OVER_PLUS - Static variable in class nxopen.uf.UFGdt.TolFormat
-
- minute - Variable in class nxopen.NXObject.ComputationalTime
-
- minute - Variable in class nxopen.uf.UFPs.KernelVersion
-
- minValue() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the min value
License requirements: None.
- minValue - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- minWeight - Variable in class nxopen.uf.UFWeight.AskPartMinWeightData
-
- minWidth() - Method in interface nxopen.cam.TrochoidalSettings
-
Returns the path min width distance
License requirements: None.
- MIRROR - Static variable in class nxopen.features.GeomcopyBuilder.TransformTypes
-
mirror about a plane
- Mirror - Interface in nxopen.features
-
Represents a mirror feature.
- MIRROR - Static variable in class nxopen.features.PatternFaceBuilder.PatternTypes
-
This stands for mirror pattern type.
- mirror() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the mirror option
License requirements: None.
- MIRROR - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum
-
mirror pattern.
- MIRROR - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
mirror attribute
- MIRROR - Static variable in class nxopen.Sketch.ConstraintType
-
- MIRROR - Static variable in class nxopen.SketchPattern.Type
-
The pattern type is mirror pattern
- MIRROR - Static variable in class nxopen.tooling.ElectrodeCopyBuilder.Copy
-
the method is mirror
- mirror(double[], double[]) - Method in interface nxopen.uf.UFMtx4
-
- MIRROR - Static variable in class nxopen.uf.UFSket.ConType
-
- MIRROR - Static variable in class nxopen.weld.DatumSurfaceBuilder.Types
-
mirror location
- MIRROR - Static variable in class nxopen.weld.JointmarkBuilder.Method
-
Mirror
- MIRROR - Static variable in class nxopen.weld.TransformBuilder.TransformationTypes
-
Mirror
- MIRROR - Static variable in class nxopen.weld.WeldPointExitBuilder.MethodUsed
-
Feature was created using the mirror method.
- MIRROR - Static variable in class nxopen.weld.WeldPointMethod
-
mirror existing points
- MIRROR_BODY_LINK - Static variable in class nxopen.features.WaveLinkBuilder.Types
-
- MIRROR_THROUGH_ALINE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
mirror through a line
- MIRROR_THROUGH_ALINE - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
-
mirror through a line
- MIRROR_THROUGH_APLANE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
mirror through a plane
- MIRROR_THROUGH_APLANE - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
-
mirror through a plane
- MIRROR_TO_TARGET - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.ShowVisionConeType
-
Represents only Mirror-Target vision cone is shown
- MIRROR_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
mirror attribute
- MIRROR_XAND_Y - Static variable in class nxopen.features.GeomcopyBuilder.CsysMirrorOptions
-
Mirror X and Y and derive Z
- MIRROR_XAND_Y - Static variable in class nxopen.features.MirrorBuilder.CsysMirrorOptions
-
Mirror X and Y and derive Z
- MIRROR_XYAND_DERIVE_Z - Static variable in class nxopen.LinkedMirrorPartBuilder.MirrorCsysOption
-
- MIRROR_XZAND_DERIVE_Y - Static variable in class nxopen.LinkedMirrorPartBuilder.MirrorCsysOption
-
- MIRROR_YAND_Z - Static variable in class nxopen.features.GeomcopyBuilder.CsysMirrorOptions
-
Mirror Y and Z and derive X
- MIRROR_YAND_Z - Static variable in class nxopen.features.MirrorBuilder.CsysMirrorOptions
-
Mirror Y and Z and derive X
- MIRROR_YZAND_DERIVE_X - Static variable in class nxopen.LinkedMirrorPartBuilder.MirrorCsysOption
-
- MIRROR_ZAND_X - Static variable in class nxopen.features.GeomcopyBuilder.CsysMirrorOptions
-
Mirror X and Z and derive Y
- MIRROR_ZAND_X - Static variable in class nxopen.features.MirrorBuilder.CsysMirrorOptions
-
Mirror X and Z and derive Y
- mirrorApproachOption() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Returns an option to determines the approach to copy and mirror ship standard parts.
- MirrorBody - Interface in nxopen.features
-
Represents a mirror body feature.
- MirrorBodyBuilder - Interface in nxopen.features
-
- mirrorBodyBuilder() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the mirrorbodybuilder
License requirements: None.
- MirrorBodyBuilder.FeatureOptionType - Class in nxopen.features
-
enum for feature option type
- MirrorBodyBuilder.ParentPart - Class in nxopen.features
-
the parent part types
- MirrorBodyBuilder.WaveLinkInformationData - Class in nxopen.features
-
- mirrorBodyCollector() - Method in interface nxopen.features.MirrorBodyBuilder
-
Returns a collection of bodies to mirror
License requirements: None.
- mirrorBodyList() - Method in interface nxopen.features.MirrorBodyBuilder
-
- mirrorBoundary() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the curves selection used to identify the mirror boundary section.
- MirrorBuilder - Interface in nxopen.cam
-
Represents a Mirror Builder.
- MirrorBuilder - Interface in nxopen.features
-
- MirrorBuilder.CsysMirrorOptions - Class in nxopen.features
-
the Coordinate System mirror options
- mirrorByType() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the mirror by type
License requirements: ugweld ("UG WELD")
.
- MirrorCageBuilder - Interface in nxopen.features.subdivision
-
- MirrorCertification - Interface in nxopen.features.vehicledesign
-
Represents a mirror certification feature.
- MirrorCertificationBuilder - Interface in nxopen.features.vehicledesign
-
- MirrorCertificationBuilder.DriverSideStandardsType - Class in nxopen.features.vehicledesign
-
Used to indicate the standard for the driver mirror.
- MirrorCertificationBuilder.EyeFromOptionType - Class in nxopen.features.vehicledesign
-
Used to indicate what part the eye is from.
- MirrorCertificationBuilder.EyellipsePercentileType - Class in nxopen.features.vehicledesign
-
Used to indicate the eyellipse percentile that is used in mirror certification.
- MirrorCertificationBuilder.EyeMethodType - Class in nxopen.features.vehicledesign
-
Used to indicate the method to calculate the eye location based on the distance from the eyellipse to the mirror pivot.
- MirrorCertificationBuilder.EyePointMethodType - Class in nxopen.features.vehicledesign
-
Used to indicate the method to define the eye point.
- MirrorCertificationBuilder.InsideStandardsType - Class in nxopen.features.vehicledesign
-
Used to indicate the standard for the inside mirror.
- MirrorCertificationBuilder.InstructionFieldPositionType - Class in nxopen.features.vehicledesign
-
Used to indicate the postion where the instruction field will be.
- MirrorCertificationBuilder.InstructionFieldsType - Class in nxopen.features.vehicledesign
-
Used to indicate the shape type of the instruction field.
- MirrorCertificationBuilder.LocationType - Class in nxopen.features.vehicledesign
-
Used to indicate the mirror location.
- MirrorCertificationBuilder.MirrorOrientationType - Class in nxopen.features.vehicledesign
-
Used to indicate the method to rotate mirror.
- MirrorCertificationBuilder.MirrorSurfaceType - Class in nxopen.features.vehicledesign
-
Used to indicate the mirror surface type.
- MirrorCertificationBuilder.PassengerSideStandardsType - Class in nxopen.features.vehicledesign
-
Used to indicate the standard for the passenger mirror.
- MirrorCertificationBuilder.ShowVisionConeType - Class in nxopen.features.vehicledesign
-
Used to indicate what vision cone will be shown.
- mirrorCrossSection() - Method in interface nxopen.mechanicalrouting.StockBuilder
-
Returns the mirror cross section value.
- mirrorCsysMethod() - Method in interface nxopen.LinkedMirrorPartBuilder
-
Returns the method specifying how to mirror coordinate systems
License requirements: solid_modeling ("SOLIDS MODELING")
.
- MirrorCurve - Interface in nxopen.features
-
Represents a mirror curve feature
To create or edit an instance of this class, use
MirrorCurveBuilder
Created in NX6.0.0
- MirrorCurveBuilder - Interface in nxopen.features
-
- MirrorCurveBuilder.PlaneOptions - Class in nxopen.features
-
Represents the Plane options.
- mirrorDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition
-
Returns the mirror definition.
- MIRRORED - Static variable in class nxopen.features.ExtendSheetBuilder.SurfaceShape
-
Extends a B-surface by mirroring the curvature continuous shape of the surface.
- MIRRORED - Static variable in class nxopen.features.TrimExtendBuilder.ExtensionMethods
-
Mirrored
- MIRRORED - Static variable in class nxopen.motion.TirePropertyTnoBuilder.TireSideType
-
- mirrored - Variable in class nxopen.uf.UFDrf.AskSymbolMirrorAndFlipData
-
- MirrorFace - Interface in nxopen.features
-
Represents a Mirror Face feature
To create or edit an instance of this class, use
MirrorFaceBuilder
Created in NX6.0.0
- MirrorFaceBuilder - Interface in nxopen.features
-
- MirrorFaceBuilder.MirrorPlaneOptions - Class in nxopen.features
-
Represents the mirror plane options
- mirrorFaces() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the faces selection used to identify the mirror surfaces.
- mirrorFaces() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
- mirrorFacetBodies() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the facet selection used to identify the mirror facet bodies.
- mirrorFacetBodies() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the facet body that represents the closed mirror profile.
- MirrorFeature - Interface in nxopen.features
-
Represents a mirror feature feature.
- MirrorFeatureBuilder - Interface in nxopen.features
-
- MirrorFeatureBuilder.PlaneOptions - Class in nxopen.features
-
the Plane options.
- mirrorObjects(Tag, Tag, int, Tag[]) - Method in interface nxopen.uf.UFSket
-
- MirrorObjectsData() - Constructor for class nxopen.uf.UFSket.MirrorObjectsData
-
- mirrorOrientation() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the mirror orientation method.
- mirrorOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the orientationOption for Mirror pattern type
License requirements: None.
- mirrorPart() - Method in interface nxopen.LinkedMirrorPartAttributeEditData
-
Returns the mirror part
License requirements: None.
- mirrorPartName() - Method in interface nxopen.LinkedMirrorPartBuilder
-
Returns the name of the new mirror part
License requirements: solid_modeling ("SOLIDS MODELING")
.
- mirrorPartType() - Method in interface nxopen.LinkedMirrorPartBuilder
-
Returns the type of mirror part which controls how the mirrored part responds to changes in source part
License requirements: solid_modeling ("SOLIDS MODELING")
.
- MirrorPattern - Interface in nxopen.geometricutilities
-
the Mirror pattern definition.
- MirrorPattern.PlaneOptions - Class in nxopen.geometricutilities
-
the Plane options.
- mirrorPlane() - Method in interface nxopen.die.AddendumSectionBuilder
-
Returns the mirror plane.
- mirrorPlane() - Method in interface nxopen.die.FillBuilder
-
Returns the plane to mirror the area fill about
License requirements: die_engineering ("DIE ENGINEERING")
.
- mirrorPlane() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the mirror plane for mirror type of instancing.
- mirrorPlane() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Returns the mirror plane.
- mirrorPlane() - Method in interface nxopen.features.subdivision.MirrorCageBuilder
-
Returns the mirror plane
License requirements: None.
- mirrorPlane() - Method in interface nxopen.LinkedMirrorPartBuilder
-
Returns the plane about which the entities are mirrored
License requirements: solid_modeling ("SOLIDS MODELING")
.
- mirrorPlane() - Method in interface nxopen.tooling.ElectrodeCopyBuilder
-
Returns the mirror plane
License requirements: None.
- mirrorPlane - Variable in class nxopen.uf.UFModlFeatures.AskMirrorPatternFaceData
-
- mirrorPlane() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Returns the plane used for mirroring a reference surface locator.
- mirrorPlane() - Method in interface nxopen.weld.TransformBuilder
-
- mirrorPlane() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the plane that a point is to be mirrored about.
- MirrorPlaneDataOfMirrorPartData() - Constructor for class nxopen.PartCollection.MirrorPlaneDataOfMirrorPartData
-
- mirrorplanedirection - Variable in class nxopen.PartCollection.MirrorPlaneDataOfMirrorPartData
-
mirror plane normal direction
- mirrorPlaneNormal() - Method in interface nxopen.LinkedMirrorPartBuilder
-
Returns the normal of the mirror plane
License requirements: solid_modeling ("SOLIDS MODELING")
.
- mirrorPlaneOption() - Method in interface nxopen.features.MirrorFaceBuilder
-
Returns the mirror plane option
License requirements: None.
- mirrorPlaneOrigin() - Method in interface nxopen.LinkedMirrorPartBuilder
-
Returns the origin of the mirror plane
License requirements: solid_modeling ("SOLIDS MODELING")
.
- mirrorplaneorigin - Variable in class nxopen.PartCollection.MirrorPlaneDataOfMirrorPartData
-
mirror plane origin
- mirrorPmiFlag() - Method in interface nxopen.LinkedMirrorPartBuilder
-
Returns the option that determines if PMI entities will be mirrored
License requirements: None.
- mirrorProcedureOptions() - Method in interface nxopen.features.subdivision.StartSymmetricModelingBuilder
-
- mirrorProfile() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify whether or not the tire profile is to be mirrored.
- mirrorRotationPoint() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the mirror rotation point specified.
- mirrorRotationYAngle() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the mirror rotation angle around vehicle Y axis after Z axis.
- mirrorRotationZAngle() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the mirror rotation angle around vehicle Z axis.
- mirrorSections() - Method in interface nxopen.die.AddendumSectionBuilder
-
- MirrorShipStructureBuilder - Interface in nxopen.features.shipdesign
-
Copy the selected parts (components) about the Mirror Plane with full model history and feature data.
- MirrorShipStructureBuilder.AppTypes - Class in nxopen.features.shipdesign
-
Settings to indicate the current application type.
- MirrorShipStructureBuilder.MirrorApproach - Class in nxopen.features.shipdesign
-
Represents the approach of mirroring ship standard parts.
- MirrorShipStructureBuilder.SortComponentByInterPartDependencyData - Class in nxopen.features.shipdesign
-
- MirrorShipStructureBuilder.Types - Class in nxopen.features.shipdesign
-
Settings to indicate the selection type of ship feature.
- mirrorSurface() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the face that represents the closed mirror profile.
- mirrorTargetRestrictions() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the faces representing the restrictions between the mirror and the target plane.
- mirrorTargetRestrictionsFacetBodies() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the facet body representing the restrictions between the mirror and the target plane.
- mirrorType() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the mirror surface type, planar or spherical.
- mirrorX() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the sheet element to Mirror along the X axis.
- mirrorY() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the sheet element to Mirror along the Y axis.
- misalignedMode() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
Returns the misaligned mode used to create new Profile Transition features.
- MISC - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- misc() - Method in interface nxopen.UFSession
-
- MISC_APPL_REASON - Static variable in class nxopen.uf.UFCgm.ExportReason
-
- MISC_DATA_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MISC_DATA_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MISC_OTHERS - Static variable in class nxopen.layout2d.Layout2dComponentMemberType
-
- MISES_STRESS_HYPOTHESIS - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Mises Stress hypothesis
- mismatchBehavior() - Method in interface nxopen.linedesigner.TypedConnectorFeatureBuilder
-
Returns the status of behavior on mismatch property
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- MISSING - Static variable in class nxopen.formboard.UpdateDiscrepancy.Type
-
Object exits in the 3D harness but is
missing from the formboard.
- MISSING - Static variable in class nxopen.layout2d.Layout2dDefinitionStatus
-
- MISSING_ITEM - Static variable in class nxopen.routing.Run.CompareStatus
-
Item or items are missing from the run
- MISSING_RUN - Static variable in class nxopen.routing.Run.CompareStatus
-
Entire run is missing
- miter() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the option to specify behaviour of mirror/pattern of the flange
License requirements: None.
- MITER - Static variable in class nxopen.mechanicalrouting.AssignCornerBuilder.CornerType
-
Deprecated.
- MITER - Static variable in class nxopen.mechanicalrouting.CornerBuilder.Type
-
allows miter corner creation
- MITER - Static variable in class nxopen.preferences.RoutingPath.AllowedCornerType
-
UF_ROUTE_AV_CORNERS_MITER
- MITER - Static variable in class nxopen.preferences.RoutingPath.DefaultCornerType
-
Miter Corner
- MITER - Static variable in class nxopen.routing.Corner.Type
-
Miter corner.
- MITER - Static variable in class nxopen.routing.CornerTypeBuilder.Type
-
- miterAngle() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the miter angle
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- miterCorner() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the corner will be closed using the miter algorithm.
- miterCorner() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
- miterCorner() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns whether the corner will be closed using miter.
- MiterCorner - Interface in nxopen.routing
-
This class defines a mitered corner.
- MiterCornerCollection - Interface in nxopen.routing
-
- miterCorners() - Method in interface nxopen.routing.RouteManager
-
MiterCorner collection .
- MITERED - Static variable in class nxopen.features.shipdesign.PlateBoundaryOptionBuilder.SplitKnuckleTypes
-
Two plates which are split and mitered and whoes side faces at knuckle edge are touching.
- MITERED_BEND - Static variable in class nxopen.routing.CornerTypeBuilder.Type
-
- MiteredBendCorner - Interface in nxopen.routing
-
Computes a fillet curve between two linear segments to form a smooth
bend transition from one segment to another that represents a mitered bend.
- MiteredBendCornerCollection - Interface in nxopen.routing
-
- miteredBendCorners() - Method in interface nxopen.routing.RouteManager
-
MiteredBendCorner collection .
- miterInteriorCornersIfNecessary() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the miter_corners option.If set to true, it miter bend edges that are larger than default bend radius.
- miterOption() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the miter option
License requirements: None.
- miterOptions() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Returns the miter options
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- MiterOptions - Interface in nxopen.features.sheetmetal
-
Represents a Miter Data Options builder.
- MiterOptions.ClosedCornerTypeOptions - Class in nxopen.features.sheetmetal
-
the closed corner type options.
- MiterOptions.CornerTreatmentOriginTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents corner treatment cutout origin type
- MiterOptions.PositionOptions - Class in nxopen.features.sheetmetal
-
the miter positions options.
- MiterOptions.TypeOptions - Class in nxopen.features.sheetmetal
-
the miter type options.
- miterRadius() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the miter radius
License requirements: None.
- miterRootRadius() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the root radius used when mitering the corner.
- miterRootRadius() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the miter root radius used for three bend corner miter treatment.
- miterToggle - Variable in class nxopen.uf.UFModl.SmcornerData
-
- MIX - Static variable in class nxopen.Part.Relations
-
support any one of relation
- MIX - Static variable in class nxopen.Part.Units
-
- MIXED - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.HiddenOptions
-
Objects hidden properties differ and will not change
- MIXED - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.LayerOptions
-
Objects are on different layers and will not be changed
- MIXED - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions
-
Objects are a mixture of reference-only and non reference-only components, and will not be changed
- MIXED - Static variable in class nxopen.assemblies.AssembliesParameterPropertiesBuilder.ArrangementOptions
-
All components are neither varied nor unvaried
- MIXED - Static variable in class nxopen.cae.ElementModifyOrderBuilder.Midnode
-
mixed midnodes
- MIXED - Static variable in class nxopen.cae.ElementTypes.Order
-
Mixed
- MIXED - Static variable in class nxopen.cae.MappedMeshBuilder.MidNodeType
-
Mixed Option
- MIXED - Static variable in class nxopen.cam.CutDirection.Types
-
Mixed
- MIXED - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Mixed
- MIXED - Static variable in class nxopen.cam.CutRegionsBuilder.CutRegionsContainmentTypes
-
Mixed
- MIXED - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.CutDirType
-
mixed
- MIXED - Static variable in class nxopen.cam.FlowCutSteepContainment.CutDirectionTypes
-
Mixed
- MIXED - Static variable in class nxopen.cam.FlowCutSteepContainment.SteepCutDirectionTypes
-
Mixed
- MIXED - Static variable in class nxopen.drawings.DrawingsPropertiesBuilder.SecondaryComponentOptions
-
Objects secondary geometry properties differ and will not change
- MIXED - Static variable in class nxopen.features.EmbossRegion.ConvexityOption
-
Indicates the emboss geometry is both above and below the Target("Mixed").
- MIXED - Static variable in class nxopen.geometricutilities.ParentEquivalencyMap.Type
-
combination of multiple methods
- MIXED - Static variable in class nxopen.MassPropertiesBuilder.UpdateOptions
-
The Update on Save property will not change for the selected objects.
- MIXED - Static variable in class nxopen.mechatronics.ForceTorqueControlBuilder.AxisJointType
-
Mix angular and linear
- MIXED - Static variable in class nxopen.mechatronics.PositionControlBuilder.Axis
-
Mix angular and linear
- MIXED - Static variable in class nxopen.mechatronics.SpeedControlBuilder.AxisJointType
-
Mix angular and linear
- MIXED - Static variable in class nxopen.routing.electrical.Connection.RouteLevel
-
Route to the pin, if possible, otherwise route to the component.
- MIXED - Static variable in class nxopen.routing.electrical.ElectricalStockDevice.RouteLevel
-
- MIXED - Static variable in class nxopen.SmartObject.UpdateOption
-
Updates after parent body for inter-part parents and updates within modeling for same part parents
- MIXED - Static variable in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshElementType
-
Mixed element of triangle and quadrangle
- mixedMesh() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the choice whether to form quardrilaterals from adjacent triangles
License requirements: None.
- MM - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepLengthUnitType
-
Length unit of millimeter
- MM - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
MM: mm (milli newton)
- MM - Static variable in class nxopen.cae.xyplot.UnitSystem
-
Deprecated.
Millimeter unit
- MM - Static variable in class nxopen.display.StudioImageCaptureBuilder.UnitsEnumType
-
Use Millimeters to define resolution
- MM - Static variable in class nxopen.HumanData.StatureUnitType
-
Indicate mm for stature
- MM - Static variable in class nxopen.sim.MachineToolConfiguration.UnitTypes
-
The millimeter unit type
- MM_FREE - Static variable in class nxopen.uf.UFSf.ElementType
-
- MM_GLUE - Static variable in class nxopen.uf.UFSf.ElementType
-
- MMC - Static variable in class nxopen.annotations.MaterialConditionModifier
-
Specifies maximum material condition modifier
- mmc() - Method in interface nxopen.cae.MMCCreateBuilder
-
Returns the Mesh Mating Condition
License requirements: None.
- MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamPriDatumModifier
-
Maximum Material Condition
- MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamSecDatumModifier
-
Maximum Material Condition
- MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTerDatumModifier
-
Maximum Material Condition
- MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifier
-
Maximum Material Condition
- MMC - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamTolMatModifierDup
-
Maximum Material Condition
- MMC - Static variable in class nxopen.DisplayManager.ShowHideType
-
Show or hide all mesh mating conditions.
- MMC - Static variable in class nxopen.uf.UFGdt.MaterialModifier
-
- MMCCreateBuilder - Interface in nxopen.cae
-
- MMCCreateBuilder.FaceSearchType - Class in nxopen.cae
-
Types of Face Serach Operations
- MMCCreateBuilder.MeshMatingType - Class in nxopen.cae
-
Types of Mesh Mating Conditions
- MMCCreateBuilder.Types - Class in nxopen.cae
-
Type of the Creation Methods for MMC
- MMDDYYYY - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
- MMETER - Static variable in class nxopen.uf.UFModl.Units
-
- MMKGFSEC2M - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepMassUnitType
-
Mass unit of (KGF-SEC^2)/M
- MMMYYYY - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
- MN - Static variable in class nxopen.cae.PreTestExportUnvBuilder.FileUnitsOption
-
MN: mm (newton)
- MN - Static variable in class nxopen.cae.xyplot.UnitSystem
-
Deprecated.
Milliforce unit
- MN_ACTION_END_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- MN_ACTION_START_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- mobileObjects() - Method in interface nxopen.facet.BestFitAlignBuilder
-
Returns the mobile objects
License requirements: None.
- MOBILITY - Static variable in class nxopen.cae.responsesimulation.EvaluationResultType
-
- MOD - Static variable in class nxopen.cam.LaserControlPoint.ControlPointTypes
-
mod
- MODAL - Static variable in class nxopen.cae.Post.AnimationStyle
-
- MODAL_CONTRIBUTION - Static variable in class nxopen.cae.responsesimulation.FrequencyDefinition.Definition
-
- MODAL_RESPONSE - Static variable in class nxopen.cae.responsesimulation.RSEvent.ResultFileType
-
Result file to be used as Restart File, which extension is ".eef" or ".sef"
- modalMass() - Method in interface nxopen.cae.BaseIteration
-
Returns the method returns mass value of this modal iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- modalmassimg - Variable in class nxopen.cae.ModeSet.ModeByIndexData
-
the imaginary part of the modal mass of the mode
- modalmassreal - Variable in class nxopen.cae.ModeSet.ModeByIndexData
-
the real part of the modal mass of the mode
- ModalProperties - Interface in nxopen.cae.responsesimulation
-
Represents the modal presentation of a response analysis meta solution .
- ModalResultsEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
Represents the abstract class of evaluation setting for FRF and transmissibility
This is an abstract class, and cannot be created.
- ModalResultsEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
Represents the abstract builder class of evaluation setting for FRF and transmissibility
This is an abstract class, and cannot be created.
- mode() - Method in interface nxopen.AutomaticTraceline
-
Returns the mode of the traceline
License requirements: assemblies ("ASSEMBLIES MODULE")
.
- mode() - Method in interface nxopen.blockstyler.PropertyList
-
Returns the mode of the list.
- MODE - Static variable in class nxopen.cae.BaseIteration.IterationType
-
Modal Analysis Iteration
- mode() - Method in interface nxopen.cam.BoundaryTurnMemberOffset
-
Returns the offset mode
License requirements: None.
- mode() - Method in interface nxopen.cam.DriveMode
-
Returns the Drive Mode Type
License requirements: None.
- mode() - Method in interface nxopen.cam.InitialProfilePlunge
-
Returns the initial profile plunge mode
License requirements: None.
- mode() - Method in interface nxopen.cam.LowerLimit
-
Returns the Lower Limit Mode
License requirements: None.
- mode() - Method in interface nxopen.cam.ReliefCut
-
Returns the relief cut mode
License requirements: None.
- mode() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the local return type
License requirements: None.
- mode() - Method in interface nxopen.drawings.AddRemoveBoxViewBuilder
-
Returns the mode type
License requirements: None.
- mode() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Returns the mode
License requirements: None.
- mode() - Method in interface nxopen.motion.AnimationControl
-
Returns the animation mode
License requirements: mechanisms ("MECHANISMS")
.
- mode() - Method in interface nxopen.motion.GraphBuilder
-
- mode() - Method in interface nxopen.PropertyContainer
-
Returns the mode of the list
License requirements: None.
- mode - Variable in class nxopen.uf.UFCgm.Size
-
- mode - Variable in class nxopen.uf.UFClone.ValidationOpts
-
- mode - Variable in class nxopen.uf.UFPath.SpindleOn
-
- mode - Variable in class nxopen.uf.UFUi.AskIwDecimalPlacesData
-
- mode - Variable in class nxopen.uf.UFUi.PointSubfunctionData
-
- mode - Variable in class nxopen.uf.UFUi.SpecifyPlaneData
-
- mode - Variable in class nxopen.uf.UFUi.SpecifyVectorData
-
- MODE3AXIS - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanModeTypes
-
3-axis mode
- MODE5AXIS - Static variable in class nxopen.cam.InspectionMethodBuilder.ScanModeTypes
-
5-axis mode
- MODE_ACCELERATION - Static variable in class nxopen.cae.responsesimulation.RSEvent.AnalysisType
-
- MODE_DESCRIPTION - Static variable in class nxopen.cae.PostScenarioVariantType
-
a mode number and frequency
- MODE_DISPLACEMENT - Static variable in class nxopen.cae.responsesimulation.RSEvent.AnalysisType
-
- MODE_SHAPES - Static variable in class nxopen.cae.ModelUpdateSolution.TargetType
-
Export all the mode shape targets to the csv file
- ModeByIndexData() - Constructor for class nxopen.cae.ModeSet.ModeByIndexData
-
- modeId() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the mode ID
License requirements: mechanisms ("MECHANISMS")
.
- modeindex - Variable in class nxopen.cae.DurSpecialistSuperpositionEventBuilder.StaticLoadData
-
- ModeInitialData - Interface in nxopen.cae.responsesimulation
-
Represents the initial setting for a normal mode .
- MODEL - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentReferenceSetType
-
Set the reference set to model
- MODEL - Static variable in class nxopen.assemblies.DesignElementBuilder.ReferenceSetType
-
Model
- MODEL - Static variable in class nxopen.cae.Result.CoordinateSystemSource
-
identifies a coordinate system in the work part
- MODEL - Static variable in class nxopen.cae.Result.DeformationScale
-
- MODEL - Static variable in class nxopen.cae.SetManager.DistributedPlanesBboxType
-
the whole FE model is used to calculate the bounding box
- MODEL - Static variable in class nxopen.cae.XyFunctionUnitSystem
-
Model unit
- MODEL - Static variable in class nxopen.cae.xyplot.UnitSystem
-
Deprecated.
Model unit
- MODEL - Static variable in class nxopen.formboard.FaceAnnotationBuilder.DrwDestination
-
Place geometry in model
- model() - Method in interface nxopen.routing.ModelTerminalsBuilder
-
The Model the selected Terminals
License requirements: routing_harness ("Routing Harness")
.
- MODEL - Static variable in class nxopen.Sketch.UpdateLevel
-
Update the full model and the sketch
- MODEL_AXIS_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- MODEL_DATA - Static variable in class nxopen.NXTo2dCreator.ExportDataOption
-
export model data only
- MODEL_EXCHANGE - Static variable in class nxopen.motion.MechatronicsBuilder.SolverIntegrationType
-
- MODEL_GRID - Static variable in class nxopen.uf.UFDisp.GridContext
-
- MODEL_PLANE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- MODEL_POINT - Static variable in class nxopen.drawings.ViewPlacementBuilder.Option
-
Align to the same point in the alignment view and the view being edited
- MODEL_PROPERTIES - Static variable in class nxopen.tooling.MWMoldedPartValidationBuilder.CheckScope
-
model properties
- MODEL_TYPE - Static variable in class nxopen.uf.UFView.Type
-
- MODEL_VIEW - Static variable in class nxopen.annotations.PlaneBuilder.PlaneMethodType
-
Model view plane
- MODEL_VIEW - Static variable in class nxopen.annotations.PmiDefaultPlane
-
- MODEL_VIEW - Static variable in class nxopen.drawings.DraftingViewCollection.ViewCopyDetailOption
-
model view
- MODEL_VIEW - Static variable in class nxopen.weld.WeldLabelBuilder.OrientationPlaneType
-
- MODEL_VIEW - Static variable in class nxopen.weld.WeldPmiBuilder.OrientationPlaneType
-
- modelAll() - Method in interface nxopen.routing.ModelTerminalsBuilder
-
The Model all the terminals
License requirements: routing_harness ("Routing Harness")
.
- modelBasedAlwaysStart() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
Returns the option that indicates action to be taken after inserting a sheet with no views
License requirements: None.
- modelBasedInsertSheet() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
Returns the flag indicating whether to automatically starts the insert sheet command when entering the drafting application if no drawing sheets exist
License requirements: None.
- modelBasedProjectedView() - Method in interface nxopen.drawings.GeneralWorkFlowBuilder
-
Returns the flag indicating whether to automatically start the projected view command after inserting a model view.
- ModelBaseObject - Interface in nxopen.linedesigner
-
Represents Model Base Object
This is an abstract class, and cannot be instantiated.
- modelBounds - Variable in class nxopen.uf.UFDisp.ComputeModelBoundsData
-
- modelCheck() - Method in interface nxopen.cae.DurabilityEventSolverBuilder
-
Returns the model check.
- modelCheck() - Method in interface nxopen.cae.DurabilitySolverBuilder
-
Returns the model check.
- modelCheck(boolean) - Method in interface nxopen.motion.MotionMethods
-
Check all motion objects
License requirements: mechanisms ("MECHANISMS")
.
- ModelCheckManager - Interface in nxopen.cae
-
Provides method for creating builder for
node element operation commands in a fem part
To obtain an instance of this class, refer to
CaePart
Created in NX5.0.0
- ModelCheckManager.CheckModelConsistencyData - Class in nxopen.cae
-
- modelCheckMgr() - Method in interface nxopen.cae.CaePart
-
Returns the select element manager belonging to this IFem .
- modelCompare(Tag, Tag, double[], Tag, Tag, double[], boolean, UFModl.CompareAccuracy, double, UFModl.CompareIdenticalfaceRule, UFModl.CompareChangeduniquefaceRule, boolean) - Method in interface nxopen.uf.UFModl
-
- modelCompare2(Tag, Tag, double[], Tag, Tag, double[], UFModl.CompareOptions) - Method in interface nxopen.uf.UFModl
-
- modelCompare3(Tag, Tag, double[], Tag, Tag, double[], UFModl.CompareOptions) - Method in interface nxopen.uf.UFModl
-
- modelConnectionPostPlacementGasket(Component, PortConnection, ReuseLibrary.ReportInBom, CharacteristicList) - Method in interface nxopen.routing.RouteManager
-
- modelConnectionPostPlacementGasketBetweenFlanges(Component, PortConnection, ReuseLibrary.ReportInBom, CharacteristicList) - Method in interface nxopen.routing.RouteManager
-
- ModelConnectionPostPlacementGasketBetweenFlangesData() - Constructor for class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketBetweenFlangesData
-
- ModelConnectionPostPlacementGasketData() - Constructor for class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketData
-
- modelConnectionPostPlacementWeldGap(Component, PortConnection, double) - Method in interface nxopen.routing.RouteManager
-
Places a weld gap by adding a weld gap characteristic to one of the part occurrences connected.
- modelDepthType() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the model depth type
License requirements: None.
- ModelDisplayBuilder - Interface in nxopen.cae
-
- ModelDisplayBuilder.ElemQualPass - Class in nxopen.cae
-
specifies display style for elements which pass the element quality check
- ModelDisplayBuilder.ElmClrBasis - Class in nxopen.cae
-
Indicates element color basis.
- ModelDisplayBuilder.ElmDispQuality - Class in nxopen.cae
-
Indicates element display quality.
- ModelDisplayBuilder.FreeEdgeFont - Class in nxopen.cae
-
specifies the object font for geometry free edges .
- ModelDisplayBuilder.FreeEdgeMarker - Class in nxopen.cae
-
specifies the marker for endpoints of geometry free edges .
- ModelDisplayBuilder.FreeEdgeWidth - Class in nxopen.cae
-
specifies object width for display for geometry free edges .
- ModelDisplayBuilder.NodeDisplayModeType - Class in nxopen.cae
-
Indicates node display mode type.
- ModelDisplayBuilder.NodeMarkerType - Class in nxopen.cae
-
Indicates node marker display symbol type.
- ModelDisplayBuilder.NodeMeshShowHideOptionType - Class in nxopen.cae
-
Indicates which nodes to include for meshes in show and hide commands.
- ModelDisplayBuilder.NodeUnattachedMarkerType - Class in nxopen.cae
-
Indicates unattached node marker display symbol type.
- ModelDisplayBuilder.RotationAxisLineFont - Class in nxopen.cae
-
specifies the object font for model rotation axis .
- ModelDisplayBuilder.RotationAxisWidth - Class in nxopen.cae
-
specifies object width for display for model rotation axis .
- ModelDisplayBuilder.StitchedEdgeFont - Class in nxopen.cae
-
specifies the object font for geometry free edges .
- ModelDisplayBuilder.StitchedEdgeMarker - Class in nxopen.cae
-
specifies the marker for endpoints of geometry free edges .
- ModelDisplayBuilder.StitchedEdgeWidth - Class in nxopen.cae
-
specifies object width for display for geometry stitched edges .
- ModelDynamicIPA - Interface in nxopen.mfgmodel
-
Represents Dynamic IPA Instance .
- modeled() - Method in interface nxopen.routing.TerminalPortBuilder
-
Returns the flag for the terminal that says if it is Modeled or not
License requirements: routing_harness ("Routing Harness")
.
- modeledgasket - Variable in class nxopen.routing.RouteManager.ModelConnectionPostPlacementGasketBetweenFlangesData
-
The gasket created
- modelEditsDone(Tag) - Method in interface nxopen.uf.UFFacet
-
- ModelElement - Interface in nxopen.pdm
-
Represents a base class that provides common methods for various model elements in a
CollaborativeDesign
.
- modelElementRevision() - Method in interface nxopen.assemblies.Component
-
- modelElementRevision() - Method in interface nxopen.assemblies.SearchResultElement
-
Returns
the underlying design model revision associated with this search element.
- ModelElementRevision - Interface in nxopen.pdm
-
Represents a base class that provides common methods for various model elements in a
CollaborativeDesign
.
- ModelElementRevision.PositioningStatus - Class in nxopen.pdm
-
Represents the positioning status of a design element
- MODELER_ERROR - Static variable in class nxopen.uf.UFConstants
-
- modelFile() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the model file name.
- modelFile() - Method in interface nxopen.motion.MechatronicsBuilder
-
Returns the model file - a file path to a MATLAB generated DLL or to an Amesim ame file
License requirements: mechanisms ("MECHANISMS")
.
- modelgaskets - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData
-
Whether or not to model Gaskets
- MODELING - Static variable in class nxopen.DxfdwgCreator.ExportDataOption
-
export model data
- MODELING - Static variable in class nxopen.DxfdwgCreator.OutputToOption
-
output to modeling
- MODELING - Static variable in class nxopen.DxfdwgImporter.SendModelDataAs
-
send model data to modeling
- MODELING - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies a modeling file new template
- MODELING - Static variable in class nxopen.NXTo2dCreator.OutputToOption
-
output to modeling
- modeling() - Method in interface nxopen.preferences.PartPreferences
-
Returns object for doing Modeling preferences settings applicable to displayed part .
- modeling() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing Modeling preferences settings applicable to entire session .
- MODELING - Static variable in class nxopen.SpreadsheetManager.Sheettype
-
Specifies Modeling sheet type
- modeling() - Method in interface nxopen.UFSession
-
- ModelingObjectPropertyTable - Interface in nxopen.cae
-
Represents a Modeling Object Property Table.
- ModelingObjectPropertyTableCollection - Interface in nxopen.cae
-
- modelingObjectPropertyTables() - Method in interface nxopen.cae.CaePart
-
Returns the modeling object property table collection belonging to this CAE Part .
- modelingSketchCircles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the modeling sketch circles
License requirements: None.
- modelingTolerance() - Method in interface nxopen.weld.DatumCommonBuilder
-
Returns the modeling distance tolerance.
- ModelingView - Interface in nxopen
-
Represents a Modeling View
Modeling Views may only be created by Save As.
- ModelingViewCollection - Interface in nxopen
-
- ModelingViewHighQualityImage - Interface in nxopen
-
Represents the properties and methods for generating a High Quality Image
of a Modeling View
To obtain an instance of this class, refer to
ModelingView
Created in NX4.0.0
- ModelingViewHighQualityImage.DisplayTechniqueType - Class in nxopen
-
Describes the technique to be used when generating the High Quality Image
- ModelingViewHighQualityImage.FormatType - Class in nxopen
-
Describes the output format of the High Quality Image to be generated
- ModelingViewHighQualityImage.ImageCountsData - Class in nxopen
-
- ModelingViewHighQualityImage.ShadeMethod - Class in nxopen
-
Describes the method to be used to generate a High Quality Image
- ModelingViewList - Interface in nxopen
-
Represents a list of objects.
- modelingViews() - Method in interface nxopen.BasePart
-
Returns the ModelingViewCollection instance belonging to this part .
- ModelizationPPTRefTargetType - Class in nxopen.cae.connections
-
Modelization PPTRefTargetType
- ModelizationResultType - Class in nxopen.cae.connections
-
Modelization result type
- modelList() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the model list.
- ModelMfgLoader - Interface in nxopen.tooldesigner
-
Represents a manager of tool designer mfg loader
Established by ToolDesigner_ModelMfgLoader when we enter the application
.
- ModelMfgManager - Interface in nxopen.tooldesigner
-
Represents a manager of tool designer mfg manager
Established by ToolDesigner_ModelMfgManager when we enter the application
.
- modelName() - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilder
-
Returns the matlab model name.
- modelName - Variable in class nxopen.uf.UFDraw.ViewInfo
-
- modelName - Variable in class nxopen.uf.UFUgmgr.AssignCopyDsetNameData
-
- modelName - Variable in class nxopen.uf.UFUgmgr.AssignNewDsetNameData
-
- modelPath() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the model file path.
- modelpath - Variable in class nxopen.tooling.ElectrodeCopyBuilder.UpdateParameterData
-
model path
- modelPercentScaleValue - Variable in class nxopen.cae.Result.DeformationParameters
-
Deprecated.
- ModelPlantManager - Interface in nxopen.linedesigner
-
Represents a manager of line designer model
Use the static method in this class to obtain an instance.
- ModelPlantManagerFactory - Class in nxopen.linedesigner
-
- ModelPlantManagerFactory() - Constructor for class nxopen.linedesigner.ModelPlantManagerFactory
-
- ModelPlantRoot - Interface in nxopen.linedesigner
-
Represents a manager of line designer plant model
Established by LineDesigner_ModelPlantManager when we enter the application
.
- modelPrecentValue - Variable in class nxopen.cae.Post.Mark
-
- modelPrecentValue - Variable in class nxopen.cae.Post.Streamline
-
- ModelProductionUnit - Interface in nxopen.linedesigner
-
Represents Production Unit .
- modelReferencePoint1() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the model reference point1.
- modelReferencePoint2() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the model reference point2.
- modelReferencePoint3() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the model reference point3.
- ModelResourceInstance - Interface in nxopen.linedesigner
-
Represents Resource Instance .
- modelScaleFactor() - Method in interface nxopen.DxfdwgImporter
-
Returns the model data scale factor - The scale factor for scaling the model data during import
License requirements: None.
- modelSelectionType() - Method in interface nxopen.cae.ResultProbeBuilder
-
Returns the model selection type
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- ModelSetupCheckBuilder - Interface in nxopen.cae.modelcheck
-
Represents a
ModelSetupCheckBuilder
which can be
used to check if the active
SimSolution
contains all the necessary
items for the analysis, including elements, loads, constraints and materials.
- ModelStaticIPA - Interface in nxopen.mfgmodel
-
Represents Static IPA Instance .
- modelTerminals(Port, double, String, boolean, Port[]) - Method in interface nxopen.routing.SegmentManager
-
Models spline paths to to specified terminals.
- ModelTerminalsBuilder - Interface in nxopen.routing
-
- modelTerminalsBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
ModelTerminalsBuilder
which Models Terminal
License requirements: routing_harness ("Routing Harness")
Created in NX7.5.0
- ModelTerminalsBuilder.CutBackLocationOption - Class in nxopen.routing
-
The Enum for selecting the CutBack Option
- ModelTerminalsBuilder.ExtensionValueOption - Class in nxopen.routing
-
The Enum for selecting the ExtensionValue Option
- ModelType - Class in nxopen.cae.xyplot
-
Represents the model type
- modeltype - Variable in class nxopen.uf.UFUgmgr.PartFileInfo
-
- modelTypeSelection() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the CDTire model type.
- ModelUpdateCorrelMethodBuilder - Interface in nxopen.cae
-
- ModelUpdateCorrelMethodBuilder.Method - Class in nxopen.cae
-
correlation method option
- ModelUpdateDesignVariable - Interface in nxopen.cae
-
Represents a
ModelUpdateDesignVariable
, which is a meta-solution used to update finite element models to match real life test data
Created in NX8.0.1
- ModelUpdateDesignVariablesCollection - Interface in nxopen.cae
-
Represents a collection of durability events.
- ModelUpdateDesignVariablesRapidCreateBuilder - Interface in nxopen.cae
-
This class is the builder that is used for the rapid creation of design variables.
- ModelUpdateDesignVariablesRapidCreateBuilder.DesignVariableTypeEnum - Class in nxopen.cae
-
The enum for the design variable type.
- ModelUpdateDesignVariablesRapidCreateBuilder.MaterialTypesEnum - Class in nxopen.cae
-
The enum for the material type.
- ModelUpdateDesignVariablesRapidCreateBuilder.PhysicalTypesEnum - Class in nxopen.cae
-
The enum for the physical type.
- ModelUpdateOptimOptionsBuilder - Interface in nxopen.cae
-
- ModelUpdateOptimOptionsBuilder.MethodChoice - Class in nxopen.cae
-
the method of the optimizer
- ModelUpdateOptimOptionsBuilder.SteepestDescMethodChoice - Class in nxopen.cae
-
the mode of the Steepest Descent method
- ModelUpdateOptionsBuilder - Interface in nxopen.cae
-
- ModelUpdateOverallWeightsBuilder - Interface in nxopen.cae
-
- modelUpdates() - Method in interface nxopen.cae.CorrelManager
-
Returns the model update solution collection belonging to this sim part .
- ModelUpdateSensitivityViewerBuilder - Interface in nxopen.cae
-
- ModelUpdateSolution - Interface in nxopen.cae
-
- ModelUpdateSolution.TargetType - Class in nxopen.cae
-
Represents the type when export to targets and errors to csv file
- ModelUpdateSolutionBuilder - Interface in nxopen.cae
-
- ModelUpdateSolutionCollection - Interface in nxopen.cae
-
Represents a collection of model update meta solution
To obtain an instance of this class, refer to
CorrelManager
- modelViewCreation() - Method in interface nxopen.PreviewPropertiesBuilder
-
Returns the model view creation.
- modelViewName() - Method in interface nxopen.annotations.SearchModelViewBuilder
-
Returns the name
License requirements: None.
- modelViewToUse() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the option for model view to use
License requirements: None.
- modelweldgaps - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData
-
Whether or not to model Weld Gaps
- modeNumber() - Method in interface nxopen.cae.optimization.DAOConstraintBuilder
-
Returns the frequency mode number
License requirements: None.
- modeNumber() - Method in interface nxopen.cae.optimization.DAOObjective
-
Returns the frequency mode number
License requirements: None.
- modeNumber() - Method in interface nxopen.cae.optimization.TBSEigenvalueOptimizationParameters
-
Returns the number of modes included in the mode tracking
License requirements: None.
- modeProperties() - Method in interface nxopen.cae.LaminateDynamicSim
-
Returns the normal mode collection belonging to this dynamic sim .
- MODERATE - Static variable in class nxopen.cae.optimization.TBSSmoothBuilder.ResultFiltering
-
Filters the element material values partially
- MODERATE - Static variable in class nxopen.cae.optimization.TBSTopologyControllerOptimizationParameters.Speed
-
Moderate stepsize
- modeRequest() - Method in interface nxopen.motion.GraphBuilder
-
- modeSelection() - Method in interface nxopen.cae.DurSpecialistBlockLoadEventBuilder
-
Returns the selection criterion for update.
- modeSelection() - Method in interface nxopen.tooling.PocketBuilder
-
Returns the mode select types
License requirements: None.
- ModeSet - Interface in nxopen.cae
-
This is the class representing a Mode set.
- ModeSet.ModeByIndexData - Class in nxopen.cae
-
- ModeSetBuilder - Interface in nxopen.cae
-
- ModeSetCollection - Interface in nxopen.cae
-
This class is a collection of
ModeSet
.
- modeSets() - Method in interface nxopen.cae.CaePart
-
- modeShapes() - Method in interface nxopen.cae.ModelUpdateOverallWeightsBuilder
-
Returns the overall weights of mode shape targets
License requirements: None.
- modeToggle() - Method in interface nxopen.display.TrueStudioBuilder
-
Returns the Mode Toggle controls whether Advanced Studio display is enabled.
- modeType() - Method in interface nxopen.motion.PackagingInterferenceBuilder
-
- modifiable - Variable in class nxopen.pdm.AlternateIdManager.AlternateIdsData
-
the new value for the alternate for modifiable flag
- modifiable - Variable in class nxopen.pdm.AlternateIdManager.AssignAlternateRevData
-
the new value of flag for revision modifiable
- modifiable() - Method in interface nxopen.shipdesign.NavigatorNode
-
Returns the node modifiable property.
- modifiable - Variable in class nxopen.uf.UFUgmgr.AssignAlternatePartIdData
-
- modifiable - Variable in class nxopen.uf.UFUgmgr.AssignCopyDsetNameData
-
- modifiable - Variable in class nxopen.uf.UFUgmgr.AssignNewDsetNameData
-
- modifiable - Variable in class nxopen.uf.UFUgmgr.AssignPartNumberData
-
- modifiable - Variable in class nxopen.uf.UFUgmgr.AssignPartRevData
-
- ModifiableFEModelOccAttribute - Interface in nxopen.cae
-
This class represents an Interface to the Finite Element Model.
- modifiableGeometry() - Method in interface nxopen.geometricutilities.PartModuleInputBuilder
-
Returns the faces/edges specified as modifiable geometry
License requirements: None.
- modifiableGeometryOption() - Method in interface nxopen.geometricutilities.PartModuleInputBuilder
-
Returns the Modifiable Geometry option
License requirements: None.
- modificationPercent() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit face modification percentage
License requirements: None.
- modificationPercentage() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the modification percentage
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- modificationPercentage() - Method in interface nxopen.features.SmoothSplineBuilder
-
Returns the modification percentage
License requirements: None.
- MODIFIED - Static variable in class nxopen.features.shipdesign.PenetrationUtils.RequestState
-
- MODIFIED - Static variable in class nxopen.formboard.UpdateDiscrepancy.Type
-
Object exists in both 3D and the formboard but
is modified in some way.
- MODIFIED - Static variable in class nxopen.issue.IssueManager.State
-
Modified state
- modified() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Returns the modified status.
- modified() - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
Returns the modified status.
- modified() - Method in interface nxopen.pdm.DesignElementRevision
-
- modified() - Method in interface nxopen.pdm.DesignSubordinateRevision
-
- MODIFIED - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus
-
The parameter value is changed
- MODIFIED - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status
-
The parameter value is changed
- MODIFIED_NO_PROMPT - Static variable in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
-
- MODIFIED_OBJECTS - Static variable in class nxopen.uf.UFView.CycleObjects
-
- MODIFIED_PART_REASON - Static variable in class nxopen.uf.UF.CallbackReason
-
- MODIFIED_PROMPT - Static variable in class nxopen.preferences.SessionPdm.UnpopulatedBehaviourType
-
- MODIFIED_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Whether the component is modified
- modifiedInSession() - Method in interface nxopen.PartReopenStatus
-
Returns whether part is modified in session.
- modifiedItemId - Variable in class nxopen.uf.UFUgmgr.ValidateAlternatePartIdData
-
- modifiedLineLength() - Method in interface nxopen.routing.EditLineSegmentBuilder
-
Updates the line length based on the expression stored in this builder.
- modifiedOnDisk() - Method in interface nxopen.PartReopenStatus
-
Returns whether part is modified on disk.
- modifiedPartNum - Variable in class nxopen.uf.UFUgmgr.ValidatePartRevData
-
- modifiedPartRev - Variable in class nxopen.uf.UFUgmgr.ValidatePartRevData
-
- modifiedRevId - Variable in class nxopen.uf.UFUgmgr.ValidateAlternatePartIdData
-
- modifiedSketch() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the modified sketch
License requirements: None.
- modifiedSketch() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the modified sketch
License requirements: None.
- modifiedSketch() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the modified sketch
License requirements: None.
- MODIFIER - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Modifier
- MODIFIER - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Modifier
- modifier - Variable in class nxopen.uf.UFGdt.AskUnitBasisData
-
- MODIFIER_ALL_AROUND - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Modifier, All Around
- MODIFIER_ALL_AROUND - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Modifier, All Around
- MODIFIER_MATERIAL_REMOVAL_PROHIBITED - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Modifier, Material Removal Prohibited
- MODIFIER_MATERIAL_REMOVAL_PROHIBITED - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Modifier, Material Removal Prohibited
- MODIFIER_MATERIAL_REMOVAL_PROHIBITED_ALL_AROUND - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Modifier, Material Removal Prohibited, All Around
- MODIFIER_MATERIAL_REMOVAL_PROHIBITED_ALL_AROUND - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Modifier, Material Removal Prohibited, All Around
- MODIFIER_MATERIAL_REMOVAL_REQUIRED - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Modifier, Material Removal Required
- MODIFIER_MATERIAL_REMOVAL_REQUIRED - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Modifier, Material Removal Required
- MODIFIER_MATERIAL_REMOVAL_REQUIRED_ALL_AROUND - Static variable in class nxopen.annotations.DraftingSurfaceFinishBuilder.FinishType
-
Modifier, Material Removal Required, All Around
- MODIFIER_MATERIAL_REMOVAL_REQUIRED_ALL_AROUND - Static variable in class nxopen.annotations.SurfaceFinishBuilder.FinishType
-
Modifier, Material Removal Required, All Around
- modifiers - Variable in class nxopen.uf.UFPd.AskBusinessProcessModifiersData
-
- modify(String, Unit) - Method in interface nxopen.cae.SimConditionParam
-
- modify(int, double, double, double) - Method in interface nxopen.cam.FormEdgesBuilder
-
Modify an existing form edges item
License requirements: cam_base ("CAM BASE")
.
- modify(NXObject, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
-
Modify an existing holder section item
License requirements: cam_base ("CAM BASE")
.
- modify(int, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
-
Modify an existing holder section item by index
License requirements: cam_base ("CAM BASE")
.
- modify(int, Point, double, double) - Method in interface nxopen.cam.InterpolateAngle
-
Modify an existing item by index
License requirements: cam_base ("CAM BASE")
.
- modify(int, Point, double, double, boolean) - Method in interface nxopen.cam.InterpolateAngle
-
Modify an existing item by index
License requirements: cam_base ("CAM BASE")
.
- modify(int, Point, Direction) - Method in interface nxopen.cam.InterpolateVector
-
Modify an existing item by index
License requirements: cam_base ("CAM BASE")
.
- modify(int, Point, Direction, boolean) - Method in interface nxopen.cam.InterpolateVector
-
Modify an existing item by index
License requirements: cam_base ("CAM BASE")
.
- modify(int, String, double, double, double, int, int, int, int, int) - Method in interface nxopen.cam.MillingTrackpointBuilder
-
- modify(int, String, int, double, double, double, int, int, int, int, int) - Method in interface nxopen.cam.MillingTrackpointBuilder
-
Modify an existing track point, the input name will be changed if it is not unique.
- modify(int, int, double, int) - Method in interface nxopen.cam.MultipleStepoverBuilder
-
Modify item
License requirements: cam_base ("CAM BASE")
.
- modify(int, double, double, double, double) - Method in interface nxopen.cam.StepParamsBuilder
-
Modify an existing step params item
License requirements: cam_base ("CAM BASE")
.
- modify(int, double) - Method in interface nxopen.cam.StockPerPassBuilder
-
Modify item
License requirements: cam_base ("CAM BASE")
.
- modify(NXObject, String, int, int, double, double, double, double, int, int) - Method in interface nxopen.cam.TrackingBuilder
-
Modify an existing trackpoint
License requirements: cam_base ("CAM BASE")
.
- modify(int, NXObject, TurnAvoidancePathPointsBuilder.MotionTypes, TurnAvoidancePathPointsBuilder.FeedrateModesTypes, double, TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
Modify an existing avoidance path point,name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.
- modify(int, int, double) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder
-
Modify a selected item
License requirements: cam_base ("CAM BASE")
.
- modify(int, int, double) - Method in interface nxopen.cam.TurnThreadFinishPassesBuilder
-
Modify an existing finish passes item
License requirements: cam_base ("CAM BASE")
.
- MODIFY - Static variable in class nxopen.features.shipdesign.PenetrationRequestBuilder.RequestDialogType
-
- MODIFY - Static variable in class nxopen.tooling.StandardPartBuilder.EditType
-
- MODIFY_EXISTING - Static variable in class nxopen.cae.SolverAppendOption.MergeOption
-
- MODIFY_INSERT - Static variable in class nxopen.tooling.SpecialFormingBuilder.Types
-
- MODIFY_LEGS - Static variable in class nxopen.cae.ElementConnectivityBuilder.Methods
-
Add or delete leg nodes of spider element
- modifyBomData(int, int, String) - Method in interface nxopen.tooling.BomListBuilder
-
- modifyByUpperDiameter(int, double, double, double, double) - Method in interface nxopen.cam.HolderSectionBuilder
-
Modify an existing holder section item by upper diameter
License requirements: cam_base ("CAM BASE")
.
- modifyColumnsButton() - Method in interface nxopen.linedesigner.ColumnGridEquipmentBuilder
-
TODO: fill in a description for this
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- modifyData(int, NXObject, double, double) - Method in interface nxopen.cam.InspectionPathPointBuilder
-
Modify an existing path point, name changed if not unique
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- modifyData(int, NXObject, TurnAvoidancePathPointsBuilder.MotionTypes, TurnAvoidancePathPointsBuilder.FeedrateModesTypes, double, TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes, TurnAvoidancePathPointsBuilder.PointStatus, int, NXObject, int, NXObject) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
Modify an existing avoidance path point,name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.
- modifyDefaults(int, int, int, int) - Method in interface nxopen.uf.UFObj
-
- modifyFeatureGeometryCallback(CustomFeatureModifyFeatureGeometryEvent) - Method in interface nxopen.features.CustomFeatureClass.ModifyFeatureGeometryCallback
-
Prototype for modify feature geometry callbacks
License requirements: solid_modeling ("SOLIDS MODELING")
.
- modifyFeatureHandler(WeldObjectBuilder) - Method in interface nxopen.weld.CustomManager.ModifyFeatureHandler
-
User defined method that is called whenever a welding joints are created or edited
License requirements: None.
- modifyFillingLineByPoints(Point, Point, Line) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder
-
Modifies the position of opening filling line, which is created by points method.
- modifyInputSheet() - Method in interface nxopen.die.CompensateRoughDataBuilder
-
Returns the modify input sheet setting.
- modifyInputSheet() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the modify input sheet
License requirements: None.
- modifyItemsButton(NXObject[], IntegrateRunsBuilder.Button) - Method in interface nxopen.routing.IntegrateRunsBuilder
-
Updates the selected nodes in Specify From/To item tree list to From/To/Member item based on buttonType
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- modifyMethod() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the modify method
License requirements: None.
- modifyMidsurface(MidSurfaceByFacePairsBuilder.SurfaceType, NXObject[]) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Use cloud of points to generate neutral sheet
License requirements: solid_modeling ("SOLIDS MODELING")
.
- modifyNodeDofs(FENode[], boolean[], boolean[], boolean[], boolean[], boolean[], boolean[]) - Method in interface nxopen.cae.CaeDOFSet
-
Modify the dofs of the passed in nodes in the CaeDOFSet.
- modifyOffsetsInString(Tag, UFCurve.OcfData, int, UFCurve.OcfValues[]) - Method in interface nxopen.uf.UFCurve
-
- modifyParametersByRow(int) - Method in interface nxopen.tooling.AddReusablePart
-
Modify parameters according to row index.
- modifyPercent() - Method in interface nxopen.facet.SmoothFacetBodyBuilder
-
Returns the modification percentage
License requirements: None.
- modifyProductAttribute(Tag, UFPd.ProductAttribute) - Method in interface nxopen.uf.UFPd
-
- modifyRefCsys(Point3d, Matrix3x3) - Method in interface nxopen.tooling.StockSizeBuilder
-
Modifies the reference csys for stock size.
- modifySpreadsheetData(String[], String[]) - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Modifies specific parameter values without change parameter statuses.
- modifyStyle() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
The method to modify the style of the previewed note
License requirements: ug_mold_design ("UG MOLD") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- modifySymbol(int, Point3d) - Method in interface nxopen.annotations.ForeshorteningSymbolBuilder
-
Modify the foreshortening symbol
License requirements: None.
- modifyTime(SimConditionTimeStep, double) - Method in interface nxopen.cae.SimConditionTimeStepCollection
-
Modifies the time of a
SimConditionTimeStep
in time history
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX9.0.0
- modifyVariableIncrementListData(int, int, double) - Method in interface nxopen.cam.CenterlineDrillVariableIncrementBuilder
-
Modify an existing variable increment value, name maybe changed if not unique
License requirements: cam_base ("CAM BASE")
.
- modifyWithParameter(int, double, double, double, double) - Method in interface nxopen.cam.UdtSectionBuilder
-
Modify an existing udt section item with parameter
License requirements: cam_base ("CAM BASE")
.
- modl() - Method in interface nxopen.UFSession
-
- MODL_MAX_ERROR - Static variable in class nxopen.uf.UFConstants
-
- MODL_PARAM_ALL - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- MODL_PARAM_COUNTERBORE - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- MODL_PARAM_COUNTERSINK - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- MODL_PARAM_HOLE - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- MODL_PARAM_INVALID - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- MODL_PARAM_NONE - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- MODL_PARAM_XLENGTH - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- MODL_PARAM_XLENGTH_TOP - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- MODL_PARAM_YLENGTH - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- MODL_PARAM_YLENGTH_TOP - Static variable in class nxopen.uf.UFGdt.ModlParameter
-
- ModlAlongCurveAngle - Interface in nxopen.geometricutilities
-
- modlBodyAskBody(Tag) - Method in interface nxopen.uf.UFSf
-
- ModlData() - Constructor for class nxopen.uf.UFGdt.ModlData
-
- ModlData(int, Tag[], UFGdt.ModlParameter, Tag) - Constructor for class nxopen.uf.UFGdt.ModlData
-
- ModlDistanceAngle - Interface in nxopen.geometricutilities
-
- modlFeatureList - Variable in class nxopen.uf.UFGdt.ModlData
-
- modlFeatures - Variable in class nxopen.uf.UFGdt.AskModlFeaturesData
-
- modlFeatures() - Method in interface nxopen.UFSession
-
- modlGeneral() - Method in interface nxopen.UFSession
-
- ModlMotion - Interface in nxopen.geometricutilities
-
- ModlMotion.Delta - Class in nxopen.geometricutilities
-
Represents the options of Delta XYZ.
- ModlMotion.Options - Class in nxopen.geometricutilities
-
Represents the options of Motion.
- modlParam - Variable in class nxopen.uf.UFGdt.ModlData
-
- modlSmd() - Method in interface nxopen.UFSession
-
- modlUi() - Method in interface nxopen.UFSession
-
- MODULE_IS_NOT_AVAILABLE - Static variable in class nxopen.uf.UFConstants
-
- moduleToNest() - Method in interface nxopen.geometricutilities.NestModuleBuilder
-
- moduleToUnnest() - Method in interface nxopen.geometricutilities.UnnestModuleBuilder
-
- mofiError - Variable in class nxopen.uf.UFWeight.Properties
-
- mofiState - Variable in class nxopen.uf.UFWeight.Properties
-
- MOLD_WIZARD - Static variable in class nxopen.features.PatchOpeningsBuilder.Types
-
Patch with Mold wizard edge patch method
- MOLD_WIZARD - Static variable in class nxopen.tooling.ToolingApplication
-
MoldWizard
- moldbaseStyle() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the moldbase style to control the visibility of process parameters for mold
License requirements: None.
- moldCsys() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MoldCsysCollection instance belonging to this part .
- MoldCsysBuilder - Interface in nxopen.tooling
-
- MoldCsysBuilder.Wcsposition - Class in nxopen.tooling
-
Represents the method to computer the WCS positino
- MoldCsysCollection - Interface in nxopen.tooling
-
- MoldDesign - Interface in nxopen.tooling
-
Represents an Mold Design.
- moldDesign() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MoldDesignCollection instance belonging to this part .
- MoldDesignCollection - Interface in nxopen.tooling
-
Represents a collection of Mold Design.
- moldFace() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the mold face, which is used to create the plate body and define the plate placement.
- moldFaceOffset() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the mold face offset, which defines an offset distance to the mold face.
- moldFacePlane() - Method in interface nxopen.features.shipdesign.DeckBuilder
-
Returns the plane in which the camber shape is generated.
- moldFacePlane() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
-
Returns the supplied section will be projected to this plane for the start of the extrusion.
- moldFacePlaneList() - Method in interface nxopen.features.shipdesign.DeckBuilder
-
Returns the list of planes defined to define the mold face.
- moldFacePlaneList() - Method in interface nxopen.features.shipdesign.GenericPlateSystemBuilder
-
Returns the list of planes defined to define the mold face.
- moldFacePlaneList() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
-
Returns the list of planes defined to define the mold face.
- moldFacePlaneList() - Method in interface nxopen.features.shipdesign.TransverseBulkheadBuilder
-
Returns the list of planes defined to define the mold face.
- moldFacePlanes() - Method in interface nxopen.features.shipdesign.DeckBuilder
-
Returns the planes selected to define the mold face.
- moldFacePlanes() - Method in interface nxopen.features.shipdesign.GenericPlateSystemBuilder
-
Returns the planes selected to define the mold face.
- moldFacePlanes() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
-
Returns the planes selected to define the mold face.
- moldFacePlanes() - Method in interface nxopen.features.shipdesign.TransverseBulkheadBuilder
-
Returns the planes selected to define the mold face.
- moldFaces() - Method in interface nxopen.features.shipdesign.HullBuilder
-
Returns the faces selected that defines the overall shape of the hull.
- moldFaceSection() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
-
Returns the section containing the shape to extrude.
- moldFaceSheet() - Method in interface nxopen.features.shipdesign.DeckBuilder
-
Returns the sheet body selected to define the mold face.
- moldFaceSheet() - Method in interface nxopen.features.shipdesign.GenericPlateSystemBuilder
-
Returns the sheet body selected to define the mold face.
- moldFaceSheet() - Method in interface nxopen.features.shipdesign.HullBuilder
-
Returns the sheet body selected that defines the overall shape of the hull.
- moldFaceSheet() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
-
Returns the sheet body selected to define the mold face.
- moldFaceSheet() - Method in interface nxopen.features.shipdesign.TransverseBulkheadBuilder
-
Returns the sheet body selected to define the mold face.
- MoldFeatureRecognitionBuilder - Interface in nxopen.tooling
-
- MoldFillingBuilder - Interface in nxopen.tooling
-
Builder used to add a gate/runner standard part from fill library, it returns null.
- MoldFillingBuilder.InstallOption - Class in nxopen.tooling
-
The installation type of the fill component.
- MoldFillingBuilder.MoveOption - Class in nxopen.tooling
-
The modification options of the selected fill component.
- moldingSideScallop() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
- MoldInsertBuilder - Interface in nxopen.tooling
-
- MoldInsertBuilder.BooleanType - Class in nxopen.tooling
-
design type: unite single workpieces, subtract overall workpieces
- MoldInsertCollection - Interface in nxopen.tooling
-
Creates a MoldInsertCollection class
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- moldInserts() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MoldInsertCollection instance belonging to this part .
- moldLine() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the selected mold line.
- moldLines - Variable in class nxopen.uf.UFModl.GflangeOptionsData
-
- moldOpenAngle() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the hydraulic motion option
License requirements: None.
- MoldProcessBuilder - Interface in nxopen.tooling
-
- MoldProcessCollection - Interface in nxopen.tooling
-
Represents a collection of Mold Process
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- moldProcesses() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MoldProcessCollection instance belonging to this part .
- moldwizard() - Method in interface nxopen.tooling.ToolingManager
-
Returns the moldwizard manager for this part .
- MoldwizardManager - Interface in nxopen.tooling
-
Provides create builder methods for Moldwizard.
- MOLECULAR_DIFFUSION_COEFFICIENT - Static variable in class nxopen.cae.Result.Quantity
-
- mom() - Method in interface nxopen.UFSession
-
- MOM_POST_EVENT - Static variable in class nxopen.cam.ToolpathEventType
-
- MOM_VARIABLES - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Mom Variables
- moment() - Method in interface nxopen.cae.DurSpecialistSuperpositionEventBuilder
-
Returns the unit load moment
License requirements: None.
- MOMENT - Static variable in class nxopen.cae.FrfSet.Measure
-
Moment
- MOMENT - Static variable in class nxopen.cae.ResultParametersWithNodalForceReport.ResultType
-
- MOMENT - Static variable in class nxopen.cae.XyFunctionMeasure
-
Moment unit
- MOMENT_BF_FT - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment unit: lbf-ft
- MOMENT_BF_IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment unit: lbf-in
- MOMENT_CN_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment unit: cN-cm
- MOMENT_KGF_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment unit: kgf-cm
- MOMENT_KGF_M - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment unit: kgf-m
- MOMENT_KGF_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment unit: kgf-mm
- MOMENT_MN_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment unit: mN-mm
- MOMENT_NM - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment unit: N-m
- MOMENT_NMM - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment unit: N-mm
- MOMENT_PER_ANGLE - Static variable in class nxopen.cae.XyFunctionMeasure
-
Moment Per Angle
- MOMENT_PER_ANGLE_LBF_FT_DEG - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: Pound-Force Foot Per Degree
- MOMENT_PER_ANGLE_LBF_FT_RAD - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: Pound-Force Foot Per Radian
- MOMENT_PER_ANGLE_LBF_IN_DEG - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: Pound-Force Inch Per Degree
- MOMENT_PER_ANGLE_LBF_IN_RAD - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: Pound-Force Inch Per Radian
- MOMENT_PER_ANGLE_MN_MM_DEG - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: MilliNewton MilliMeter Per Degree
- MOMENT_PER_ANGLE_MN_MM_RAD - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: MilliNewton MilliMeter Per Radian
- MOMENT_PER_ANGLE_NMDEG - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: Newton Meter Per Degree
- MOMENT_PER_ANGLE_NMM_DEG - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: Newton MilliMeter Per Degree
- MOMENT_PER_ANGLE_NMM_RAD - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: Newton Milli Meter Per Radian
- MOMENT_PER_ANGLE_NMRAD - Static variable in class nxopen.cae.XyFunctionUnit
-
Moment Per angle Unit: Newton Meter Per Radian
- momentInertiaYY - Variable in class nxopen.cae.BeamSection.Properties
-
Moment of Inertia about y-axis
- momentInertiaYZ - Variable in class nxopen.cae.BeamSection.Properties
-
YZ-Product of Inertia
- momentInertiaZZ - Variable in class nxopen.cae.BeamSection.Properties
-
Moment of Inertia about z-axis
- momentsOfInertia - Variable in class nxopen.uf.UFWeight.Properties
-
- momentum(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the momentum.
- MONETARY - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Monetary
- MONETARY - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- MONO_ARC - Static variable in class nxopen.die.QuickBinderBuilder.Types
-
mono arc
- MONOCHROME - Static variable in class nxopen.display.ImageBaseBuilder.ImageColorModes
-
monochrome color mode
- MONOCHROME - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
Pixels are converted to black and white and dithered using
the Floyd-Steinberg algorithm.
- MONOCHROME_HORIZON - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.SceneImageType
-
Monochrome horizon.
- monochromeBackgroundColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the monochrome background color
License requirements: None.
- monochromeDisplay() - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
Returns the monochrome display is return
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- monochromeDisplay() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the monochrome display flag.
- monochromeDisplay - Variable in class nxopen.uf.UFDisp.DrawingDisplayData
-
- monochromeForegroundColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the monochrome foreground color.
- monochromePreselectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the monochrome color for preselected objects
License requirements: None.
- monochromeSelectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting
-
Returns the monochrome selection_color.
- MONOCULAR - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.EyePointTypes
-
Monocular type
- MONOLITHIC - Static variable in class nxopen.JtCreator.FileStructure
-
MONOLITHIC
- month() - Method in interface nxopen.DateItemBuilder
-
Returns the month
License requirements: None.
- month - Variable in class nxopen.uf.UFPs.KernelVersion
-
- MONTH - Static variable in class nxopen.visualreporting.Classifier.DateGroupMethodOption
-
The date grouping by month will be used
- MOONEYRIVLIN - Static variable in class nxopen.PhysicalMaterial.Type
-
Mooney Rivlin
- MOONEYRIVLINTESTDATA - Static variable in class nxopen.PhysicalMaterial.Type
-
Mooney Rivlin - test data option
- MOORE_PENROSE_PSEUDOINVERSE - Static variable in class nxopen.motion.LmsSolverProperty.DynamicInitialVelocityMethods
-
- MORE - Static variable in class nxopen.annotations.SearchModelViewBuilder.ValueComparisionOptions
-
- MORE - Static variable in class nxopen.visualreporting.VisualReportExplorer.ReportDownStatus
-
There are more objects of interest below the currently reported upon objects
- MORE_EQUAL - Static variable in class nxopen.annotations.SearchModelViewBuilder.ValueComparisionOptions
-
- moreDetails() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Callback of button more details
License requirements: die_engineering ("DIE ENGINEERING")
.
- moreDetails() - Method in interface nxopen.tooling.DieEngLineupBuilder
-
The more details button call back
License requirements: die_engineering ("DIE ENGINEERING")
.
- moreDetails - Variable in class nxopen.uf.UFStd.VrmlParams
-
- moreSummaryDetails() - Method in interface nxopen.VRMLImporter
-
Returns the More Summary Details flag.
- MORPH - Static variable in class nxopen.cam.PatternTypeBuilder.Option
-
Pattern is created by morphing between curves
- MORPH - Static variable in class nxopen.features.MoveEdgeBuilder.EndFaceBehaviorType
-
- MORPH - Static variable in class nxopen.features.OffsetEdgeBuilder.EndFaceBehaviourType
-
- MorphRevolvedMeshBuilder - Interface in nxopen.cae
-
- MorphRevolvedMeshBuilder.CurveType - Class in nxopen.cae
-
the type of curve to be used as reference curve for morphing
- MORROW - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.EquivalentStressMethodEnum
-
- MORROW - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.EquivalentStressMethodEnum
-
Morrow
- MORROW - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicMeanStressEnum
-
- MOST_RECENT_RUN - Static variable in class nxopen.validate.Parser.DataSourceTypes
-
Result of most recent run
- MOST_SCROLL - Static variable in class nxopen.blockstyler.Node.Scroll
-
Scrolls the tree to maximum to make the node appear in tree window
- MOTION - Static variable in class nxopen.cae.XyFunctionMacroType
-
Function is only used in a motion application
- MOTION - Static variable in class nxopen.cam.CamPathToolpathEventType
-
- MOTION - Static variable in class nxopen.cam.MoveBuilder.Feed
-
Motion
- motion() - Method in interface nxopen.features.AdmMoveFaceBuilder
-
Returns the motion.
- motion() - Method in interface nxopen.features.CopyFaceBuilder
-
Returns the motion about which the copied faces move
License requirements: None.
- motion() - Method in interface nxopen.features.CutFaceBuilder
-
Returns the motion about which the cut faces move
License requirements: None.
- motion() - Method in interface nxopen.features.MoveEdgeBuilder
-
Returns the motion which record the move behaviour.
- motion() - Method in interface nxopen.features.PullFaceBuilder
-
Returns the motion.
- motion() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify how the suspension system motion will be defined.
- motion() - Method in interface nxopen.geometricutilities.PatternClockingBuilder
-
Returns the user defined transform motion
License requirements: None.
- motion() - Method in interface nxopen.mechanicalrouting.MovePathBuilder
-
Returns the transformation to apply to the selected routing objects.
- motion() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Returns the object which defines the transformation from start point to end point.
- MOTION - Static variable in class nxopen.tooling.SIZERExportBuilder.RunMode
-
Motion Mode
- motion() - Method in interface nxopen.UFSession
-
- Motion2DContact() - Constructor for class nxopen.uf.UFMotion.Motion2DContact
-
- Motion2DContact(String, int, Tag[], int, Tag[], int, boolean, boolean, double, UFMotion.ContactParameters) - Constructor for class nxopen.uf.UFMotion.Motion2DContact
-
- Motion3DContact() - Constructor for class nxopen.uf.UFMotion.Motion3DContact
-
- Motion3DContact(String, int, Tag[], int, Tag[], UFMotion.ContactForce, UFMotion.ContactFriction, double, UFMotion.ContactParameters, double) - Constructor for class nxopen.uf.UFMotion.Motion3DContact
-
- MOTION_ADAMS_RES_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MOTION_ADAMS_RES_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MOTION_BASED - Static variable in class nxopen.cam.SimulationOptionsBuilder.IpwEnable
-
motion based
- MOTION_EXPORT_SDK_RMD_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MOTION_EXPORT_SDK_RMD_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MOTION_FLEXBODY_OP2DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MOTION_FLEXBODY_RFI_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MOTION_FLEXBODY_RFI_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MOTION_GENERAL - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Motion General Function
- MOTION_GENERAL - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Motion General Function
- MOTION_GENERAL - Static variable in class nxopen.cae.XyFunctionMotionType
-
Function is Motion General Function
- MOTION_IMP_EXP_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MOTION_IMP_EXP_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MOTION_LENGTH - Static variable in class nxopen.cam.PathDisplay.ColorByType
-
- MOTION_LMS_LMSMOTIONRESULTS_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MOTION_LMS_LMSMOTIONRESULTS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MOTION_LMS_MRES_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MOTION_LMS_MRES_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MOTION_LMS_OFF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MOTION_RECURDYN_RAD_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MOTION_RECURDYN_RAD_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MOTION_RECURDYN_RAD_RAN_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MOTION_RECURDYN_RAD_RAN_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MOTION_TYPE - Static variable in class nxopen.cam.PathDisplay.ColorByType
-
- MOTION_TYPE_APPROACH - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_CUT - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_CYCLE - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_DEPARTURE - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_ENGAGE - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_FIRST_CUT - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_FROM - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_GOHOME - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_RAPID - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_RETRACT - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_RETURN - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_STEPOVER - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_THREAD_TURN - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_TRAVERSAL - Static variable in class nxopen.uf.UFPath.MotionType
-
- MOTION_TYPE_UNDEFINED - Static variable in class nxopen.uf.UFPath.MotionType
-
- motionBodies() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the motion bodies.
- motionBody() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the motion body
License requirements: None.
- MotionBuilder - Interface in nxopen.motion
-
This builder class is used to create or edit
MotionObject
This is an abstract class, and cannot be created.
- MotionCurvesBuilder - Interface in nxopen.presslinesimulation
-
- motionDistance() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the motion distance
License requirements: None.
- motionEnd() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Motion End
License requirements: None.
- motionEndType() - Method in interface nxopen.cam.CircularAboutAxisMoveBuilder
-
Returns the arc end type
License requirements: None.
- MotionEnvironment - Interface in nxopen.motion
-
Represents a Motion Environment
To obtain an instance of this class, refer to
MotionSession
Created in NX7.5.0
- MotionEnvironment.AdoptAssemblyJointStatus - Class in nxopen.motion
-
Represents the on-off status of adopt assembly joint
- MotionEnvironment.Analysis - Class in nxopen.motion
-
Represents analysis type of current mechanisms
- MotionEnvironment.JointWizardStatus - Class in nxopen.motion
-
Represents the on-off status of joint wizard
- MotionEnvironment.Solver - Class in nxopen.motion
-
Represents Motion solver of current mechanism
- motionEulerAngle1() - Method in interface nxopen.motion.DriverMultiOperations
-
Returns the motion motion euler angle1, it is for revolute joint and cylindrical joint
License requirements: None.
- motionFace() - Method in interface nxopen.features.CoaxialBuilder
-
Returns the motion face.
- motionFace() - Method in interface nxopen.features.MakeOffsetBuilder
-
Returns the motion face
License requirements: None.
- motionFace() - Method in interface nxopen.features.ParallelBuilder
-
Returns the motion face.
- motionFace() - Method in interface nxopen.features.PerpendicularBuilder
-
Returns the motion face
License requirements: None.
- motionFace() - Method in interface nxopen.features.SymmetricBuilder
-
Returns the motion face.
- motionFace() - Method in interface nxopen.features.TangentBuilder
-
Returns the motion face
License requirements: None.
- MotionFunction - Interface in nxopen.motion
-
Represents a Motion Function Object
To create or edit an instance of this class, use
FunctionBuilder
Created in NX11.0.0
- MotionManager - Interface in nxopen.motion
-
A manager to deal with all motion objects
To obtain an instance of this class, refer to
Part
Created in NX5.0.0
- motionManager() - Method in interface nxopen.Part
-
Returns the MotionManager for this part .
- motionMethod() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the motion method
License requirements: None.
- MotionMethods - Interface in nxopen.motion
-
- motionMethods() - Method in interface nxopen.motion.MotionSession
-
Returns the
MotionMethods
belonging to this part
Created in NX8.0.0
- motionName() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the motion name
License requirements: None.
- motionObject - Variable in class nxopen.motion.GraphBuilder.CurveData
-
Deprecated.
Attribute object
- MotionObject - Interface in nxopen.motion
-
Represents the motion base object class.
- MotionObject.GroupType - Class in nxopen.motion
-
The group type attribute is used for import subassembly functionality.
- motionOrigin() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the motion vector origin
License requirements: None.
- motionOutput() - Method in interface nxopen.cam.Cycle
-
Returns the motion output
License requirements: None.
- motionOutput() - Method in interface nxopen.cam.MillOperationBuilder
-
Returns the motion output builder
License requirements: None.
- motionOutput() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the motion output
License requirements: None.
- motionOutputBuilder() - Method in interface nxopen.cam.OperationBuilder
-
Returns the motion output builder
License requirements: None.
- motionPointOnCurve() - Method in interface nxopen.motion.DriverMultiOperations
-
Returns the motion point on curve, it is for point on curve constraint
License requirements: None.
- motionProfile() - Method in interface nxopen.mechatronics.CamBuilder
-
Returns the motion profile.
- motionProfile() - Method in interface nxopen.mechatronics.GraphControlBuilder
-
Returns the motion profile.
- MotionProfile - Interface in nxopen.mechatronics
-
Represents the MotionProfile class.
- MotionProfileBuilder - Interface in nxopen.mechatronics
-
- MotionProfileBuilder.MasterValueUnit - Class in nxopen.mechatronics
-
the Master Unit types
- MotionProfileBuilder.ProfileCyclicType - Class in nxopen.mechatronics
-
Indicates which cyclic type should be take.The type of Cam Profile can be switched between non-cyclic,
cyclic and relative cyclic.
- MotionProfileBuilder.SlaveValueUnit - Class in nxopen.mechatronics
-
the Slave Unit types
- MotionProfileCollection - Interface in nxopen.mechatronics
-
Represents a collection of Motion Profile.
- motionProfiles() - Method in interface nxopen.mechatronics.PhysicsManager
-
- MotionSensor - Interface in nxopen.motion
-
Represents a motion sensor
To create or edit an instance of this class, use
MotionSensorBuilder
Created in NX6.0.0
- MotionSensorBuilder - Interface in nxopen.motion
-
- MotionSensorBuilder.Component - Class in nxopen.motion
-
component enumeration type
- MotionSensorBuilder.Reference - Class in nxopen.motion
-
reference frame enumeration type
- MotionSensorBuilder.Types - Class in nxopen.motion
-
sensor type
- MotionSensorCollection - Interface in nxopen.motion
-
Represents a collection of sensor objects
To obtain an instance of this class, refer to
MotionManager
Created in NX6.0.0
- motionSensors() - Method in interface nxopen.motion.MotionManager
-
- MotionSession - Interface in nxopen.motion
-
Represents motion session
To obtain an instance of this class, refer to
Session
Created in NX5.0.0
- motionSession() - Method in interface nxopen.Session
-
Returns the Motion session .
- motionShape - Variable in class nxopen.cam.CamOperationCircularMotionDataType
-
- motionShape - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- motionShape - Variable in class nxopen.cam.CamOperationLinearMotionDataType
-
- motionshape - Variable in class nxopen.cam.Path.IsToolpathEventAMotionData
-
- motionShape() - Method in interface nxopen.cam.PathContactMotion
-
Returns the motion shape
License requirements: None.
- motionSimFile() - Method in interface nxopen.cae.SimMotionLoadsBuilder
-
Returns the motion simulation part file
License requirements: None.
- MotionSimulation - Interface in nxopen.motion
-
Represents Motion.Simulation
To obtain an instance of this class, refer to
Session
Created in NX5.0.0
- motionSimulation() - Method in interface nxopen.Session
-
Returns the Motion session .
- motionSimulation() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MotionSimulationCollection instance belonging to this part .
- MotionSimulationBuilder - Interface in nxopen.tooling
-
- MotionSimulationBuilder.CamDefinitionType - Class in nxopen.tooling
-
Specifies the way to define cam, automatically or manually.
- MotionSimulationBuilder.EjectorMoveOptions - Class in nxopen.tooling
-
Specifies the ejector move type, after or while
- MotionSimulationBuilder.MoldbaseStyleType - Class in nxopen.tooling
-
Specifies the style type of moldbase, two-plate style or three-plate style
- MotionSimulationBuilder.Types - Class in nxopen.tooling
-
Specifies the operation options of motion simulation.
- MotionSimulationCollection - Interface in nxopen.tooling
-
Represents a collection of MotionSimulation.
- MotionSolution - Interface in nxopen.motion
-
Represents a solution
To create or edit an instance of this class, use
MotionSolutionBuilder
Created in NX5.0.0
- MotionSolution.GraphObjectResultData - Class in nxopen.motion
-
- MotionSolutionBuilder - Interface in nxopen.motion
-
- MotionSolutionBuilder.AnalysisTypes - Class in nxopen.motion
-
- MotionSolutionBuilder.SolutionTypes - Class in nxopen.motion
-
Solution type
- MotionSolutionCollection - Interface in nxopen.motion
-
Represents a collection of Driver objects
To obtain an instance of this class, refer to
MotionManager
Created in NX5.0.0
- motionSolutions() - Method in interface nxopen.motion.MotionManager
-
- motionTranslationZ() - Method in interface nxopen.motion.DriverMultiOperations
-
Returns the motion translation z, it is for slider joint and cylindrical joint
License requirements: None.
- motionType() - Method in interface nxopen.cam.AcrossVoids
-
Returns the motion type
License requirements: None.
- motionType - Variable in class nxopen.cam.CamOperationCircularMotionDataType
-
- motionType - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- motionType - Variable in class nxopen.cam.CamOperationLinearMotionDataType
-
- motionType() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the motion type
License requirements: None.
- motionType() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the motion type
License requirements: None.
- motionType() - Method in interface nxopen.cam.MoveBuilder
-
Returns the motion type
License requirements: None.
- motionType() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the motion type
License requirements: None.
- motiontype - Variable in class nxopen.cam.Path.IsToolpathEventAMotionData
-
- motionType() - Method in interface nxopen.cam.PathLinearMotion
-
Returns the motion type
License requirements: None.
- motiontype - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointData
-
the motionTypeColumn
- motiontype - Variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.PointListData
-
the motionTypeColumn
- motionType() - Method in interface nxopen.mechatronics.TransportSurfaceBuilder
-
Returns the motion type
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- motionType() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the motion type
License requirements: None.
- motionVector() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the motion vector.
- motor() - Method in interface nxopen.motion.DriverOperation
-
Returns the motor
License requirements: None.
- MOTOR - Static variable in class nxopen.motion.DriverOperation.Type
-
Motor
- Motor - Interface in nxopen.motion
-
Represents a motion motor base object class
This is an abstract class, and cannot be created.
- MOTOR_DRIVER - Static variable in class nxopen.motion.GraphBuilder.RequestChoices
-
Deprecated.
Motor Driver
- MOTOR_SIGNAL - Static variable in class nxopen.cae.XyFunctionMeasure
-
Motor signal unit
- MOTOR_SIGNAL_NONE - Static variable in class nxopen.cae.XyFunctionUnit
-
Motor Signal unit: none
- MotorBuilder - Interface in nxopen.motion
-
This builder class is used to create or edit
Motor
This is an abstract class, and cannot be created.
- MOTORCYCLE - Static variable in class nxopen.motion.TireBuilder.Type
-
for Motorcycle Tire Model
- motorType() - Method in interface nxopen.motion.PMDCMotorBuilder
-
Returns the motor type
License requirements: nx_motion_motor ("NX Motion Motor")
.
- MOUNT - Static variable in class nxopen.cam.RobotMountMove.Types
-
Mount
- MOUNT - Static variable in class nxopen.sim.KinematicJunctionBuilder.SystemClass
-
a mounting junction
- MOUNT_COMPONENT - Static variable in class nxopen.tooling.MotionSimulationBuilder.Types
-
Mounts die components to kinematic components
- mountGeometry(NXObject) - Method in interface nxopen.presslinesimulation.MountPointBuilder
-
Adds to the list of geometry that is mounted on commit.
- mountingAngle() - Method in interface nxopen.features.shipdesign.OrientationAngleMethodsBuilder
-
Returns the constant angle value to rotate from the given vector or reference object.
- mountingAngle() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the mounting angle expression
License requirements: None.
- MountingInterface - Interface in nxopen.ame
-
Represents a Mounting Interface
This object does not need a creator.
- MountingInterfaceBuilder - Interface in nxopen.ame
-
- MountingInterfaceBuilder.FixingPolicy - Class in nxopen.ame
-
Represents component fixing type
- MountingInterfaceBuilder.InterfaceType - Class in nxopen.ame
-
Represents mounting interface type
- MountingInterfaceBuilder.ReceptaclePolicy - Class in nxopen.ame
-
Represents component receptacle type
- mountingInterfaceType() - Method in interface nxopen.ame.MountingInterfaceBuilder
-
- mountingMethod() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the mounting method
License requirements: None.
- mountingMethod() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the mounting method
License requirements: None.
- mountingMethod() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the mounting method
License requirements: None.
- mountingMethod() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the mounting method
License requirements: None.
- mountingPosition() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the mounting position
License requirements: None.
- mountingType() - Method in interface nxopen.cae.responsesimulation.RSEventAttributes
-
Returns the ship type
License requirements: nx_response_anlys ("NX Response Analysis")
.
- mountKimComp(UFVariant, String, String, String, String, double) - Method in interface nxopen.uf.UFSim
-
- MountPointBuilder - Interface in nxopen.presslinesimulation
-
Use this class to mount tools, tooling and parts to interfaces.
- MountPointBuilder.GeometrySelectionFilterType - Class in nxopen.presslinesimulation
-
Selection filter for mounting bodies.
- MountPointBuilderList - Interface in nxopen.presslinesimulation
-
Represents a list of objects.
- MountPointBuilderListBuilder - Interface in nxopen.presslinesimulation
-
- mountPunchEdge() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch edge to place the mount.
- mountPunchFace() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the punch face to place the mount.
- mountTool(UFVariant, UFSim.ToolClass, String, String, String, double) - Method in interface nxopen.uf.UFSim
-
- mountType() - Method in interface nxopen.cam.RobotMountMove
-
Returns the mount tool type
License requirements: cam_base ("CAM BASE")
.
- mouseGestureType() - Method in interface nxopen.display.SelPref
-
Returns the mouse gesture type
License requirements: None.
- MOV - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.ProjectionDrapingDirectionType
-
Define draping direction using MOVs
- movable() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the flag that indicates movable .If true then movable.
- MOVABLE_FRONT - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatTypes
-
front
- MOVABLE_REAR - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.SeatTypes
-
rear
- movableModifierAngle() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the movable modifier angle
License requirements: None.
- MOVE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Result
-
move
- Move - Interface in nxopen.cam
-
Represents a Move
To obtain an instance of this class use
MoveCollection
Created in NX5.0.0
- MOVE - Static variable in class nxopen.cam.OperationTransformBuilder.Result
-
move
- move() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Move
License requirements: cam_base ("CAM BASE")
.
- move(Point3d, boolean) - Method in interface nxopen.features.subdivision.CageManipulatorData
-
- move(Point3d, Point, boolean) - Method in interface nxopen.features.subdivision.CageManipulatorData
-
Moves the objects by dragging.
- MOVE - Static variable in class nxopen.linedesigner.ConnectionCreatorBuilder.ConnectionType
-
- MOVE - Static variable in class nxopen.mechatronics.ComparisonResult.Category
-
Move category
- MOVE - Static variable in class nxopen.mechatronics.ECADImportBuilder.PositionMode
-
Deprecated.
Move
- move() - Method in interface nxopen.motion.MarkerToNodeData
-
Returns whether to move the marker to node
License requirements: mechanisms ("MECHANISMS")
.
- MOVE - Static variable in class nxopen.sim.IsvControlPanelBuilder.SingleStepType
-
Move
- MOVE - Static variable in class nxopen.tooling.LayoutBuilder.XrefNum
-
Move type
- MOVE - Static variable in class nxopen.tooling.LayoutBuilder.YrefNum
-
Move type
- MOVE - Static variable in class nxopen.tooling.LayoutRepositionBuilder.Type
-
Move type
- MOVE - Static variable in class nxopen.tooling.MoldFillingBuilder.MoveOption
-
Modifying current component
- MOVE - Static variable in class nxopen.tooling.SIZERImportBuilder.PositionMode
-
Move
- MOVE - Static variable in class nxopen.weld.AutoPointBuilder.Types
-
move existing points
- MOVE_AND_ADAPT - Static variable in class nxopen.features.AdmMoveFaceBuilder.MoveOptionType
-
Option equates to standard Move Face.
- MOVE_AND_CONNECT - Static variable in class nxopen.linedesigner.ConnectionCreatorBuilder.ConnectionType
-
- MOVE_BY_FEATURE - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Moves a copy of a point reducible feature in a direction associated with another feature
- MOVE_BY_VECTOR - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Moves a copy of a point reducible feature in a user specifiec direction
- MOVE_CONFLICT - Static variable in class nxopen.mechatronics.ComparisonResult.Category
-
Conflict from Move category
- MOVE_MACHINE - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.CommandTypes
-
Enter a statement to move the machine
- MOVE_OBJECTS_TO_WORK_LAYER - Static variable in class nxopen.DisplayManager.LayerSetting
-
Move the objects to work layer if they are in invisible layer
- MOVE_ORIGINAL - Static variable in class nxopen.features.MoveObjectBuilder.MoveObjectResultOptions
-
move objects
- MOVE_ORIGINAL - Static variable in class nxopen.routing.TransformPathBuilder.TransformOption
-
Move the selected entities.
- MOVE_PART - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Move Part command.
- MOVE_PART - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Move Part command.
- MOVE_PART - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- MOVE_PATH - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Move Path command.
- MOVE_PATH - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Move Path command.
- MOVE_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- MOVE_POINT - Static variable in class nxopen.mechanicalrouting.EditPointBuilder.Motiontype
-
Move Point Motion
- moveAllGates() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Returns a value that indicates whether to move all gates or not when moving the active gate.
- moveAlongFace() - Method in interface nxopen.features.CoaxialBuilder
-
Returns the move along face.
- moveAlongFace() - Method in interface nxopen.features.ParallelBuilder
-
Returns the move along face.
- moveAlongFace() - Method in interface nxopen.features.PerpendicularBuilder
-
Returns the move along faces
License requirements: None.
- moveAlongFace() - Method in interface nxopen.features.SymmetricBuilder
-
Returns the move along face.
- moveAlongFace() - Method in interface nxopen.features.TangentBuilder
-
Returns the move along faces
License requirements: None.
- MoveBuilder - Interface in nxopen.cam
-
Represents Move Builder
This cannot be instantiated
.
- MoveBuilder.Feed - Class in nxopen.cam
-
the feed Type
- MoveBuilder.Motion - Class in nxopen.cam
-
the motion Type
- moveButton() - Method in interface nxopen.cae.CorrelFineTuneAlignmentBuilder
-
The move button to nudge alignment by the defined distance along the selected distance vector
License requirements: nx_correl_base ("FE Correlation")
.
- MoveCollection - Interface in nxopen.cam
-
Represents the move collection
To obtain an instance of this class, refer to
Operation
Created in NX5.0.0
- moveCommands(Command[], CommandLibrary.MoveCommandLocation, Command) - Method in interface nxopen.report.CommandLibrary
-
Moves the commands to the new position.
- moveComponent(Component, Vector3d, Matrix3x3) - Method in interface nxopen.assemblies.ComponentAssembly
-
Moves a component by specifying a translation and rotation.
- moveComponent(int, String, boolean) - Method in interface nxopen.display.IrayPlusMaterialEditorBuilder
-
Moves a component of layers up and down of layers stack.
- moveComponent(Vector3d) - Method in interface nxopen.linedesigner.FastPlacementUtilityBuilder
-
To move component
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- moveComponents(NXObject, NXObject[]) - Method in interface nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder
-
Move components to the container
License requirements: nx_ship_mfg_prep ("Ship Manufacturing")
.
- moveComponentToLocation(NXObject, Vector3d) - Method in interface nxopen.linedesigner.ReuseLibraryUtilityBuilder
-
Move component to the location
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- moveConnectionToThisFolder(IConnection) - Method in interface nxopen.cae.connections.Folder
-
Add a connection to this folder.
- moveConnectors(NXObject, NXObject, double, boolean, boolean) - Method in interface nxopen.linedesigner.UINodeUtils
-
To move connectors while DnD of assembly
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- moveContent() - Method in interface nxopen.drawings.DrawingRegionBuilder
-
Returns the move content
License requirements: None.
- moveCopyInstance() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the move copy instance option
License requirements: None.
- moveCopyInstance() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the move copy instance option
License requirements: None.
- MoveCurve - Interface in nxopen.features
-
Represents a move curve feature
To create or edit an instance of this class, use
MoveCurveBuilder
Created in NX9.0.0
- MoveCurveBuilder - Interface in nxopen.features
-
- moveCurves(NXObject[]) - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Move extract curves that are not parting lines to the invisible layer.
- MOVED_ALONG_GUIDE - Static variable in class nxopen.weld.JointmarkPointsBuilder.PointPosition
-
User moved point from default location along the guide curve
- MOVED_OFF_GUIDE - Static variable in class nxopen.weld.JointmarkPointsBuilder.PointPosition
-
User moved point from default location off the guide curve
- moveDelta(double, double) - Method in interface nxopen.weld.WeldFillStripBuilder
-
Moves the fill strip the input length and width values.
- moveDirection() - Method in interface nxopen.cam.FollowPartMoveBuilder
-
Returns the move direction
License requirements: None.
- moveDirectionTag - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- moveDisplayableObjects(int, DisplayableObject[]) - Method in interface nxopen.layer.LayerManager
-
Moves displayable objects to the specified layer.
- moveDistance() - Method in interface nxopen.cam.InspectionConstructedFeatureBuilder
-
Returns the move distance
License requirements: None.
- moveDistance() - Method in interface nxopen.tooling.UserDefinedMotionBuilder
-
Returns the move distance
License requirements: None.
- moveDown(String, String) - Method in interface nxopen.ame.ConfigureResultTableBuilder
-
The action to move added column down
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- moveDown(SearchTerm) - Method in interface nxopen.assemblies.SubsetRecipe
-
Move a
SearchTerm
down to another location in the recipe.
- moveDown(int) - Method in interface nxopen.cam.HolderSectionBuilder
-
Move down a holder section item
License requirements: None.
- moveDown(int) - Method in interface nxopen.cam.InterpolateAngle
-
Move down an item
License requirements: None.
- moveDown(int) - Method in interface nxopen.cam.InterpolateVector
-
Move down an item
License requirements: None.
- moveDown(int) - Method in interface nxopen.cam.MillingTrackpointBuilder
-
Move down a trackpoint
License requirements: None.
- moveDown(int) - Method in interface nxopen.cam.MultipleStepoverBuilder
-
Move down a item
License requirements: cam_base ("CAM BASE")
.
- moveDown(int) - Method in interface nxopen.cam.StepParamsBuilder
-
Move down a step params item
License requirements: None.
- moveDown(int) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
Move down a avoidance path point
License requirements: None.
- moveDown(int) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder
-
Move down a selected item
License requirements: cam_base ("CAM BASE")
.
- moveDownAttributes(FamilyAttribute[], int) - Method in interface nxopen.partfamily.TemplateManager
-
Move down the specified attributes of a part family by the moveDownCount.
- moveDownYCurves(int[]) - Method in interface nxopen.motion.GraphBuilder
-
- moveDumbGeometry() - Method in interface nxopen.positioning.ComponentPositioner
-
Returns the flag that enables the positioner to reposition dumb geometry.
- MoveEdge - Interface in nxopen.features
-
Represents a move edge feature
To create or edit an instance of this class, use
MoveEdgeBuilder
Created in NX9.0.0
- MoveEdgeBuilder - Interface in nxopen.features
-
- MoveEdgeBuilder.EndFaceBehaviorType - Class in nxopen.features
-
Represents the end face behavior.
- moveEnd() - Method in interface nxopen.cam.VectorDistanceMoveBuilder
-
Returns the move end type
License requirements: None.
- moveEntry(ContextMenuEntry, int) - Method in interface nxopen.menubar.ContextMenu
-
Reorders the menu to move a menu entry to a new position in the list.
- moveEvent(int, int) - Method in interface nxopen.cam.Path
-
Move the event at index fromIndex to index toIndex.
- moveEvent(PathEvent, CamPathToolpathEventLocation, PathEvent) - Method in interface nxopen.cam.Path
-
Move the event relative to the referenceEvent and the location.
- MoveFace - Interface in nxopen.features
-
Represents a move face feature , don't use it until nx502
To create or edit an instance of this class, use
MoveFaceBuilder
Created in NX5.0.2
- MoveFaceBuilder - Interface in nxopen.features
-
Represents a builder for a move face feature, don't use it until nx502.
- MoveFaceBuilder.Types - Class in nxopen.features
-
the move face types, don't use it until nx502
- moveFaceCollector() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the face collector holding the faces to move
License requirements: None.
- moveFeature(Tag[], int, double[][]) - Method in interface nxopen.uf.UFModeling
-
- moveFolderObject(PMNavFolderObject, PMNavFolderObject) - Method in interface nxopen.mechatronics.PMNavFolderLocator
-
Move the folder object
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- moveHandle() - Method in interface nxopen.geometricutilities.ModlMotion
-
- moveImages(ReportImage[], Report.MoveItemLocation, ReportImage) - Method in interface nxopen.report.ImagesGroupItem
-
Moves the images to the new position.
- moveLabel(AMEEngineeringObjectLabel, Point3d) - Method in interface nxopen.ame.AMEManager
-
Moves an Engineering Object Label
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- moveLinearAxis(UFVariant, String, double, double) - Method in interface nxopen.uf.UFSim
-
- moveLoadcaseDown(int) - Method in interface nxopen.cae.DurabilityResultPathBuilder
-
Moves a loadcase down by index.
- moveLoadcaseUp(int) - Method in interface nxopen.cae.DurabilityResultPathBuilder
-
Moves a loadcase up by index.
- moveLocation(int, int, int) - Method in interface nxopen.cae.connections.ILocationsContainer
-
Move the location by number of positions
License requirements: None.
- moveMargin(double) - Method in interface nxopen.annotations.OrdinateMargin
-
Moves an ordinate margin object by specifying a new offset from the margin origin.
- moveMeasurementPoints() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to move measurement points to avoid collisions
License requirements: None.
- movementArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the movement arbitrary plane
License requirements: None.
- movementArbitraryVector() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the movement arbitrary vector
License requirements: None.
- movementDirection() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the value indicating the direction of pole movement during match
License requirements: None.
- movementMethod() - Method in interface nxopen.features.EdgeSymmetryBuilder
-
Returns the pole movement method to be used in matching process
License requirements: None.
- movementMethod() - Method in interface nxopen.features.PolylineBuilder
-
Returns the movement method
License requirements: None.
- movementMethod() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the movement method
License requirements: None.
- movementMethod() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the movement method
License requirements: None.
- movementMethod() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the movement method.
- movementMethod() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the movement method
License requirements: None.
- movementPlane() - Method in interface nxopen.features.PolylineBuilder
-
Returns the movement plane
License requirements: None.
- movementPlane() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the movement plane
License requirements: None.
- movementPlane() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the movement plane.
- movementPlane() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the movement plane
License requirements: None.
- movementVector() - Method in interface nxopen.features.PoleSmoothingBuilder
-
- movementVector() - Method in interface nxopen.features.PolylineBuilder
-
Returns the movement vector
License requirements: None.
- movementVector() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the movement vector
License requirements: None.
- movementVector() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the movement vector.
- movementVector() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the movement vector
License requirements: None.
- moveMeshToNewCollector(Mesh, boolean, MeshCollector, MeshCollector) - Method in interface nxopen.cae.MeshManager
-
Call for moving a Mesh to a new Mesh Collector
License requirements: nx_masterfem ("Finite Element Modeling")
.
- moveMethod() - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
Returns the control pole move method
License requirements: None.
- moveMinimumDistance() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Moves a point to the nearest location on the resting face
License requirements: ugweld ("UG WELD")
.
- moveNavigatorNodes(AMEBaseNode, AMEBaseNode[]) - Method in interface nxopen.ame.AMEManager
-
Moves Navigator nodes under same parent
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- moveNode(Point, Point3d) - Method in interface nxopen.features.RapidSurfaceBuilder
-
Moves node
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- MoveNodeBuilder - Interface in nxopen.cae
-
- moveNodesOffGeometry - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- moveNotesToFolder(NoteFolder, NoteBase[]) - Method in interface nxopen.cae.NoteManager
-
Move notes to specified folder
License requirements: nx_masterfem ("Finite Element Modeling")
.
- MoveObject - Interface in nxopen.features
-
Represents a Move-Object feature.
- moveObject() - Method in interface nxopen.SketchPasteBuilder
-
Returns the move object
License requirements: None.
- MoveObjectBuilder - Interface in nxopen.features
-
- MoveObjectBuilder.LayerOptionType - Class in nxopen.features
-
Indicates the layer on which moved or copied objects will be placed
- MoveObjectBuilder.MoveObjectResultOptions - Class in nxopen.features
-
Indicates whether to move or copy objects
- moveObjectResult() - Method in interface nxopen.features.MoveObjectBuilder
-
Returns the move rotate result
License requirements: None.
- moveObjects(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.CAMSetup
-
Move objects
License requirements: cam_base ("CAM BASE")
.
- moveObjects(CAMSetup.View, CAMObject[], CAMObject, CAMSetup.Paste) - Method in interface nxopen.cam.InspectionSetup
-
Move objects
License requirements: insp_programming ("INSPECTION PROGRAMMING")
.
- moveObjects(TaggedObject[]) - Method in interface nxopen.mechatronics.PMNavFolderObject
-
Moves physics objects.
- moveObjectsState() - Method in interface nxopen.positioning.Network
-
Returns
the move objects state for the network.
- moveObjectsToUndisplayableLayer() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Move objects to undisplayable layer.
- moveOnlySelectedPoles() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the indicator to move only selected poles
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- moveOption() - Method in interface nxopen.features.AdmMoveFaceBuilder
-
Returns the move option.
- moveOptions() - Method in interface nxopen.tooling.MoldFillingBuilder
-
Returns the modification option.
- moveOrCopyOption() - Method in interface nxopen.routing.TransformPathBuilder
-
Returns the operation to perform during the commit method.
- moveParameter(OperatorRuleBuilder.ParameterType, int, int) - Method in interface nxopen.ame.OperatorRuleBuilder
-
Move existing parameter
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- moveParameterDown(String) - Method in interface nxopen.mechatronics.TagTableBuilder
-
Move parameter down.
- moveParameterUp(String) - Method in interface nxopen.mechatronics.TagTableBuilder
-
Move parameter up.
- moveParents() - Method in interface nxopen.features.MoveObjectBuilder
-
Returns the move parents flag.
- MovePathBuilder - Interface in nxopen.mechanicalrouting
-
- MovePathBuilder.DetachTypes - Class in nxopen.mechanicalrouting
-
Specifies the options that will allow the user to enforce the transformation by detaching
the routing objects (if necessary) from objects that stop the selected object from moving.
- movePoint(Point3d) - Method in interface nxopen.weld.WeldPointBuilder
-
Move selected points
License requirements: ugweld ("UG WELD")
.
- movePole() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the move pole
License requirements: None.
- MovePoleBuilder - Interface in nxopen.geometricutilities
-
This class manages the control poles movements for a surface or curve.
- MovePoleBuilder.MoveMethodType - Class in nxopen.geometricutilities
-
Move Pole types
- MovePoleBuilder.WCSDirectionType - Class in nxopen.geometricutilities
-
WCS direction
- moveReferenceSheet() - Method in interface nxopen.weld.JointmarkBuilder
-
Move the Reference Sheet to work layer, and unlink from grouping feature.
- moveResourceInstances(ModelPlantRoot, ModelResourceInstance[], ModelBaseObject) - Method in interface nxopen.linedesigner.ModelPlantManager
-
Move Resource Instances
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- moveReusableComponent(Vector3d, Matrix3x3, int) - Method in interface nxopen.tooling.AddReusablePart
-
Moves a reusable component to a selected position
License requirements: None.
- moveRotaryAxis(UFVariant, String, double, double) - Method in interface nxopen.uf.UFSim
-
- moveSectionOrigin(Curve, Point3d, int) - Method in interface nxopen.die.AddendumSectionBuilder
-
Moves addendum section to a new location.
- moveSegment(SectionLineSegmentPointBuilder, Point) - Method in interface nxopen.drawings.SectionLineSegmentPointListBuilder
-
- moveSharpEdge() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the Maintain blend and move sharp edges option
License requirements: None.
- moveSheet(int, boolean) - Method in interface nxopen.cam.WorkInstructionBuilder
-
Move a Work Instruction sheet
License requirements: nx_wi_authoring (" NX Work Instruction Authoring")
.
- moveSnapshotsAfter(ISnapshot, ISnapshot[]) - Method in interface nxopen.dmu.SnapshotCollection
-
- moveSnapshotsBefore(ISnapshot, ISnapshot[]) - Method in interface nxopen.dmu.SnapshotCollection
-
- moveStartPoint(BoundaryMemberSetPlanarMill, double) - Method in interface nxopen.cam.BoundarySetPlanarMill
-
Move the start point of a closed boundary
License requirements: cam_base ("CAM BASE")
.
- moveStartPoint() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the move start point
License requirements: None.
- moveStep(SimSolutionStep, SimSolution.StepPosition, SimSolutionStep) - Method in interface nxopen.cae.SimSolution
-
Moves step to the specified position
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- moveStep(Tag, Tag) - Method in interface nxopen.uf.UFAssem
-
- moveSxlineRotpt(Tag, UFDrf.Object) - Method in interface nxopen.uf.UFDraw
-
- moveSxlineSxseg(Tag, UFDrf.Object) - Method in interface nxopen.uf.UFDraw
-
- moveSxseg(Tag, UFDraw.SxlineSxsegs) - Method in interface nxopen.uf.UFDraw
-
- moveToBottom(int) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.annotations.LeaderDataList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.assemblies.PartitionList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.BodyList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.BoundarySetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.CAMFeatureList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.CustomLoopSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.CutVolumeList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.GeometrySetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.HoleBossSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.LaserControlPointList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.SplitterList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.ThreadedBossSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.UdeList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.cam.WireGuideList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.DateItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.diagramming.PortBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.die.DieBooleanBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.die.DieLimitsBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.die.DieLocationBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.die.PierceItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.ExpressionCollectorSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.ExpressionSectionSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.FeatureList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.RegionListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.fields.PathObjectsList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.SelectionListList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.ListCreatorList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.ModelingViewList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.motion.ConfigurationParameterList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.motion.InputPortAssociationList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.motion.OutputPortAssociationList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.motion.PortVariableList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.motion.SegmentBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.motion.SignalChartListItemList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.NXObjectList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.ObjectList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.PlaneList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.PointList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.RegionPointList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.routing.RunItemsBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.ScCollectorList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.SectionList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.sim.KinematicChainList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.TaggedObjectList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.weld.JointItemBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToBottom(int) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Move object at the specified location to the bottom of the list.
- moveToCenter() - Method in interface nxopen.weld.DatumPinBuilder
-
Moves a point to the center of a circle or slot boundary
License requirements: ugweld ("UG WELD")
.
- moveToClearancePlane() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Move to clearance plane
License requirements: cam_base ("CAM BASE")
.
- MoveToContainerBuilder - Interface in nxopen.features.shipdesign
-
This class is used to move detail design parts to a new ship container.
- moveToDefaultLayer(DynamicSection[]) - Method in interface nxopen.display.DynamicSectionCollection
-
Moves the specified dynamic sections in the part to default layer.
- MoveToDrawingViewBuilder - Interface in nxopen.drafting
-
- moveToModel(DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Moves view objects to model.
- moveToPendingComponent(NXObject) - Method in interface nxopen.assemblies.ComponentAssembly
-
Move a
Component
in this assembly to a pending list.
- moveToPoint(Point3d) - Method in interface nxopen.weld.WeldFillStripBuilder
-
Moves the fill strip to the input center.
- MoveToPointBuilder - Interface in nxopen.cam
-
- moveToTop(int) - Method in interface nxopen.ame.NamingRuleBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.ame.TypeMappingBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.annotations.ArbitraryAreaSeedBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.annotations.DatumReferenceBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.annotations.FeatureControlFrameDataBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.annotations.FeatureControlFrameIndicatorBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.annotations.LeaderDataList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.annotations.MasterSymbolListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.annotations.SymbolCatalogParameterBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.annotations.TitleBlockCellBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.assemblies.PartitionList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.BodyList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cae.DependentMeshListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cae.ManualSweepBetweenListItemSelectionList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelectionList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.BoundaryMemberSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.BoundarySetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.BoundaryTurnVariableStockSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.CAMFeatureList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.CollisionPairBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.CustomLoopSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.CutVolumeList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.DriveChainItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.GeometrySetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.HoldingSystemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.HoleBossSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.InPathEventDataBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.LaserControlPointList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.ManualFeatureBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.SplitterList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.SurfaceDriveGeometrySetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.TabPointDataBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.ThreadedBossSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.ThreadedHoleSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.ToolPathSplitItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.UdeList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.cam.WireGuideList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.DateItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.diagramming.ConnectionLocationBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.diagramming.LeaderLineBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.diagramming.PortBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.diagramminglibraryauthor.LineTypeBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.die.DieAssistantFlangeProfileList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.die.DieAssistantTrimProfileList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.die.DieBooleanBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.die.DieLimitsBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.die.DieLocationBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.die.DrawBeadSegmentBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.die.PierceItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.display.PointCloudClippingBoxesListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.drafting.AttributeItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.drafting.PrimaryContentItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.drawings.SectionLineSegmentBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.drawings.ShipDraftingViewLinesBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.ExpressionCollectorSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.ExpressionSectionSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.FeatureList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.GlobalShapingCurveOffsetBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.GlobalShapingPointOffsetBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.PartGeometryCopySelectBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.PointSetFacePercentageBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.RegionListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.sheetmetal.BendListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.sheetmetal.ConvertInputListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.sheetmetal.FeatureBendPropertiesBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.sheetmetal.JoggleInputListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.sheetmetal.SMBoundaryConditionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.AnchorPointList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.BulkHeadListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.CornerCutListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.DeckListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.DrawingPartBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.DrawingSheetBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.ItFrameListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.OrientationRegionItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.PlaneListBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.SeamBlockBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.SectionViewBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.ShipNamesBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.StandardPartItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.SteelInsulationBoundaryBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.SubSystemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.shipdesign.TransFrameListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.SmoothRangeBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.subdivision.CageSectionDataList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.VariableRadiusPointsBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.features.vehicledesign.CloseRangeDemoCylinderListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.fields.PathObjectsList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.BlendSetbackBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.BoundingObjectBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.EntityUsageInfoList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.FaceSetOffsetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.FtmFixedCurvesBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.InstanceEditedExpressionItemList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.ParentEquivalencyMapList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.PatternIncrementItemList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.PatternSpacingsListItemList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusFaceGroupBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.RotationSetBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.ScalingSetBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.SelectionListList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.SpinePlaneBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.StyledSweepDoubleOnPathDimBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.TransitionCurveBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.TrimCurveBoundingObjectBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.TwoExpressionsCollectorSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.geometricutilities.TwoExpressionsSectionSetList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.ListCreatorList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechanicalrouting.PathTransitionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.GanttOperationConditionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.GanttOperationParameterBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.MATLABSignalConnectionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.PathConstraintFrameBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.ProxyObjectParameterBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.RuntimeFormulaParameterBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.SensorsActuatorsListBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.SHMSignalConnectionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.SignalConnectionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.mechatronics.SignalMappingConnectionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.ModelingViewList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.motion.ConfigurationParameterList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.motion.ControlInputPortBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.motion.InputPortAssociationList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.motion.OutputPortAssociationList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.motion.PortVariableList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.motion.SegmentBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.motion.SignalChartListItemList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.NXObjectList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.ObjectList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.PlaneList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.PointList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.presslinesimulation.HydraulicLifterBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.presslinesimulation.LinearCamBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.presslinesimulation.MachineAdjustmentBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.presslinesimulation.MountPointBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.presslinesimulation.RotaryCamBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.presslinesimulation.UserMotionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.RegionPointList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.routing.RunItemsBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.ScCollectorList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.SectionList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.sim.KinematicChainList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.sim.KinematicChannelBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.sim.KinematicJunctionBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.TaggedObjectList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.tooling.SelectReuseLibraryListItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.tooling.ShimInnerProfileSetBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.weld.JointItemBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.weld.JointmarkFaceSetsBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.weld.JointmarkGuideBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.weld.JointmarkPointsBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.weld.WeldBeadPathBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.weld.WeldBeadSizeBuilderList
-
Move object at the specified location to the top of the list.
- moveToTop(int) - Method in interface nxopen.weld.WeldFillStripBuilderList
-
Move object at the specified location to the top of the list.
- moveToView(DisplayableObject[]) - Method in interface nxopen.ViewDependentDisplayManager
-
Moves model objects to view.
- moveType() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the move type
License requirements: None.
- moveType() - Method in interface nxopen.cam.LaserLinearMove
-
Returns the Move Type
License requirements: None.
- moveType() - Method in interface nxopen.cam.NormalToToolAxisMoveBuilder
-
Returns the normal type
License requirements: None.
- moveType() - Method in interface nxopen.cam.TeachmodeLinearMoveBuilder
-
Returns the Movement Type
License requirements: None.
- moveType() - Method in interface nxopen.cam.TurnThreadEngageRetractBuilder
-
Returns the Move Type
License requirements: None.
- moveUp(String, String) - Method in interface nxopen.ame.ConfigureResultTableBuilder
-
The action to move added column up
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- moveUp(SearchTerm) - Method in interface nxopen.assemblies.SubsetRecipe
-
Move a
SearchTerm
up to another location in the recipe.
- moveUp(int) - Method in interface nxopen.cam.HolderSectionBuilder
-
Move up a holder section item
License requirements: None.
- moveUp(int) - Method in interface nxopen.cam.InterpolateAngle
-
Move up an item
License requirements: None.
- moveUp(int) - Method in interface nxopen.cam.InterpolateVector
-
Move up an item
License requirements: None.
- moveUp(int) - Method in interface nxopen.cam.MillingTrackpointBuilder
-
Move up a trackpoint
License requirements: None.
- moveUp(int) - Method in interface nxopen.cam.MultipleStepoverBuilder
-
Move up a item
License requirements: cam_base ("CAM BASE")
.
- moveUp(int) - Method in interface nxopen.cam.StepParamsBuilder
-
Move up a step params item
License requirements: None.
- moveUp(int) - Method in interface nxopen.cam.TurnAvoidancePathPointsBuilder
-
Move up a avoidance path point
License requirements: None.
- moveUp(int) - Method in interface nxopen.cam.TurnRoughVariableIncrementBuilder
-
Move up a selected item
License requirements: cam_base ("CAM BASE")
.
- moveUpAttributes(FamilyAttribute[], int) - Method in interface nxopen.partfamily.TemplateManager
-
Move up the specified attributes of a part family by the moveUpCount.
- moveUpYCurves(int[]) - Method in interface nxopen.motion.GraphBuilder
-
- moveUserInputs(CommandBuilder.UserInputLocation, UserInput[], boolean, UserInput) - Method in interface nxopen.report.CommandBuilder
-
Moves the user inputs to the new position.
- moveUserItems(IUserItem[], Report.MoveItemLocation, IUserItem) - Method in interface nxopen.report.Report
-
Moves the user items to the new position.
- moveView(Point3d) - Method in interface nxopen.drawings.DraftingView
-
Sets the view origin at the provided location.
- moveView(Tag, double[]) - Method in interface nxopen.uf.UFDraw
-
- moveViewsToDrawing(DraftingView[], DrawingSheet) - Method in interface nxopen.drawings.DraftingViewCollection
-
Move views to drawing
License requirements: drafting ("DRAFTING")
.
- moveViewToDrawing(Tag, Tag) - Method in interface nxopen.uf.UFDraw
-
- moveWithExtensionSegments() - Method in interface nxopen.routing.TransformPathBuilder
-
Returns a message stating whether or not to move the selected segments with extension segments.
- MovieManager - Interface in nxopen
-
- movieManager() - Method in interface nxopen.UI
-
the Movie Manager class.
- MovieSettingsBuilder - Interface in nxopen
-
This class is the builder for the Movie Settings.
- MovieSettingsBuilder.CaptureAreaChoices - Class in nxopen
-
Indicates the are being recorded in the movie.
- MovieSettingsBuilder.PlaybackSpeedChoices - Class in nxopen
-
Indicates the playback speed of the movie.
- MOVING_ROAD - Static variable in class nxopen.motion.TirePropertyTnoBuilder.ContactMethodType
-
- movingDirection() - Method in interface nxopen.linedesigner.SingleElementConveyorBuilder
-
Returns the moving direction of conveyor
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- movingFace() - Method in interface nxopen.features.sheetmetal.MigratedPanelBuilder
-
Returns
the parent moving face.
- MPC - Static variable in class nxopen.cae.NodalForceReport.ForceComponent
-
- MPC - Static variable in class nxopen.cae.NodalForceReportBuilder.Force
-
- MPC - Static variable in class nxopen.uf.UFSf.ElementType
-
- MPI - Static variable in class nxopen.ame.BusInterfaceType
-
- mpi - Variable in class nxopen.uf.UFDrf.AskObjectPreferencesData
-
- mpi - Variable in class nxopen.uf.UFDrf.AskPreferencesData
-
- mpr - Variable in class nxopen.uf.UFDrf.AskObjectPreferencesData
-
- mpr - Variable in class nxopen.uf.UFDrf.AskPreferencesData
-
- mpreview() - Method in interface nxopen.cam.DPMItpBuilder
-
Preview drive path
License requirements: cam_base ("CAM BASE")
.
- mrshape() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the tool shape for material removal
License requirements: None.
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsAllowableData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsBearingData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsBoltBendingData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsBoltCombinedShearTensionBendingData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsBoltCombinedShearTensionData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsBoltShearData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsMaterialStressAllowableData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsNetSectionData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedCompressiveData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedLongitudinalShearCombinedData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedShearData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatBendingData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatCompressiveData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalBendingCombinedData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalShearCombinedData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatShearBendingCombinedData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatShearData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsShearTearOutData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsTrescaPlaneStressData
-
Margin of safety
- ms - Variable in class nxopen.cae.aerostructures.author.ABB.MsTsaiHillPlaneStressData
-
Margin of safety
- msAllowable(double, double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS allowable.
- MsAllowableData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsAllowableData
-
- msao() - Method in interface nxopen.UFSession
-
- msBearing(double, double, double, double, double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS bearing
Computes margin of bearing
The formula is 'MS = PBearingAllowable / P - 1'
where
'PBearingAllowable' is the bearing load allowable ('PBearingAllowable = Fbr * D * t')
'Fbr' is the bearing stress allowable
'D' is the d iameter
't' is the thickness
'P' is the bearing load (P = FactorLoad * PExtracted)
'FactorLoad' is the ratio of load between extracted load 'PExtracted' and 'P'
'PExtracted' is the extracted load ('PExtracted = sqrt( Py ^ 2 + Pz ^ 2 )')
'Py' is the shear load in Y direction
'Pz' is the shear load in Z direction
Input
Fbr Bearing stress allowable
D Diameter
t Thickness
Factor Load factor
Py Shear load Y direction
Pz Shear load Z direction
Output
MS Margin of safety
Return
Status of the calculation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- MsBearingData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsBearingData
-
- msBoltBending(double, double, double, double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS bolt bending
Computes margin of safety of a bolt under bending load
The formula is 'MS = MBendingAllowable / M - 1'
where
'MBendingAllowable' is the bending moment allowable of the bolt.
- MsBoltBendingData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsBoltBendingData
-
- msBoltCombinedShearTension(double, double[], double, double, double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS bolt combined shear tension
Computes margin of safety of a bolt under shear load and tension load
The formula is 'MS = 1 / sqrt( Rt ^ 2 + Rs ^ 3 ) - 1'
where
Rt = PTensileX/PTensileAllowable
Rs = PShear/PShearAllowable
'PTensileAllowable' is the tensile load allowable of the bolt
'PTensileX' is the tensile load applied on the fastener
'PShearAllowable' is the single shear load allowable of the bolt
'Pshear' is the shearing load applied through the shear area.
- msBoltCombinedShearTensionBending(double, double[], double, double, double, double[], double[], double, double, double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS bolt combined shear tension bending
Computes margin of safety of a bolt under shear, tension and bending load
The formula is MS = 1 / sqrt ( ( Rt + Rb ) ^ 2 + Rs ^ 3 ) - 1
where
Rt = PTensileX / PTensileAllowable
Rb = M / MAllowable
Rs = PShear / PShearAllowable
Tensile data
'PTensileAllowable' is the tensile load allowable of the bolt
'PTensileX' is the tensile load applied on the fastener
Bending data
'MAllowable' is the bending moment allowable of the bolt
'M' is the bending moment applied to the bolt.
- MsBoltCombinedShearTensionBendingData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsBoltCombinedShearTensionBendingData
-
- MsBoltCombinedShearTensionData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsBoltCombinedShearTensionData
-
- msBoltShear(double, double, double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS bolt shear
Computes margin of safety of a bolt under shear load
The formula is MS = PShearAllowable / P - 1
where
'PShearAllowable' is the single shear load allowable of the bolt
'P' is the shearing load applied through the shear area.
- MsBoltShearData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsBoltShearData
-
- msetPart() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the current machine set under which a blank is added.
- MSEXCEL - Static variable in class nxopen.issue.IssueAttachment.Type
-
Microsoft Excel type
- MSF - Static variable in class nxopen.cae.CorrelShapemetrictype
-
Shape metric type is Modal Scale Factors
- msgNcCommand(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- msgProgramMark(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- msgUserFeedback(UFVariant, String) - Method in interface nxopen.uf.UFSim
-
- MSHVLD_CORNER_MID_NODE_OVERLAP - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_DUPLICATE_NODE_LABEL - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_EDGE_DENSITY_NOT_HONORED - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_EDGE_DENSITY_NOT_HONORED_FOR_MATCH_MATE_PNRS - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_EDGE_FACE_DENSITY_NOT_HONORED - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_FACE_DENSITY_NOT_HONORED - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_FACE_DENSITY_NOT_HONORED_FOR_MATE_PNRS - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_HARD_PNT_NOT_HONORED - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID1D_CONNECT_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID1D_CONTACT_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID1D_WELD_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_CORNER_MID_NODE_ORDER - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_EDGE_LIMIT - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_EDGE_MATE_FOR_MMC - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_ELEM_NODE_NUM - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_ELEM_OWNER - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_END_NODE_ASSOCIATIVITY - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_FREE_MATE_EDGE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_FREE_MATE_FACE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_GLUE_MATE_EDGE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_GLUE_MATE_FACE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_MATCH_EDGE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_MATCH_MATE_EDGE_MESH - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_NODE_BTYPE - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_INVALID_NODE_OWNER - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_MESH_NOT_ASSOCIATED_TO_MR - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_MESH_WITH_DIFF_DIM_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_MESH_WITH_NO_ELEM - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_MESH_WITH_PENDING_UPDATE - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_MID_NODE_NOT_PROPERLY_SET - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_MR_WITH_NO_MG - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_NODE_ASSOCIATED_TO_CHILD_FACE - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_NODE_ASSOCIATED_TO_INTERIOR_EDGE - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_NODE_ASSOCIATED_TO_TINY_EDGE - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_NODE_NOT_ASSOCIATED_TO_MG - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_NODE_SHARED_BY_MULTIPLE_COLLECTORS - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_NOT_CLASSIFIED - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- MSHVLD_ORPHAN_NODE - Static variable in class nxopen.uf.UFSf.MeshErrorType
-
- msMaterialStressAllowable(double, double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS material stress allowable.
- MsMaterialStressAllowableData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsMaterialStressAllowableData
-
- msNetSection(double, double, double, double, double, double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Net section
Computes margin of net section (due to bolt hole)
The formula is MS = PNetSectionAllowable / P - 1
where:
'PNetSectionAllowable' is the net section load allowable.
- MsNetSectionData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsNetSectionData
-
- msPlateBuckling(double, double, double, double, double, double, double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling
Computes margin of safety of a metallic plate under buckling load (generic formula)
The formula is MS = Allowable / Stress - 1
where:
'Allowable' is the compressive buckling stress allowable
'Stress' is the stress
'MS' is the margin of safety
Allowable = eta * PI^2*k*E/(12*(1-nu^2)) * (t/b)^2
where
'k' is the buckling coefficient
'E' is the Young modulus
'nu' is the elastic Poisson coefficient
't' is the panel thickness
'b' is the panel dimension
'eta' is the plasticity reduction factor: SigmaAllowablePlastic = eta*SigmaAllowableElastic
Input
E Young modulus
nu Elastic Poisson coefficient
b Panel dimension
t Panel thickness
k Buckling coefficient
eta Plasticity reduction factor
nblc Number of load cases
sigma Stress coming from load extraction
Output
MS Margin of safety
Return
Status of the calculation
License requirements: nx_masterfem ("Finite Element Modeling")
.
- msPlateBucklingCurvedCompressive(double, double, double, double, double, double, double, ABB.MaterialBehaviour, double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling Curved Compressive
Computes margin of safety of a curved metallic rectangular panel under compressive load
The formula is MS = Allowable / |Stress| - 1
where:
'Allowable' is the compressive buckling stress allowable
'Stress' is the compressive stress (MS is not calculated in case of tensile stress),
'MS' is the margin of safety
Allowable = eta * PI^2*kc*E/(12*(1-nu^2)) * (t/c)^2
where
'kc' is the buckling coefficient
'E' is the Young modulus
'nu' is the elastic Poisson coefficient
't' is the panel thickness
'c' is the shorter panel dimension c = min(a,b)
'eta' is the plasticity reduction factor: SigmaAllowablePlastic = eta*SigmaAllowableElastic
eta = 1 if material is considered as elastic (Material behaviour = Elastic)
eta is obtain from following charts if material is considered as elastic-plastic (Material behaviour = Elastic-Plastic):
SigmaAllowablePlastic/Sigma0.7 = f(SigmaAllowableElastic/Sigma0.7)
MetallicPanelCompressivePlasticityCurveBC3 with Sigma0.7 is the stress for secant modulus equal to 70% of Young modulus
Input
E Young modulus
nu Elastic Poisson coefficient
n Ramberg-Osgood parameter
a Unloaded edge length
b Loaded edge length
t Panel thickness
r Panel radius of curvature
behaviour Material behaviour
nblc Number of load cases
sigma Stress coming from load extraction
Output
sigmaAllowable Stress allowable
MS Margin of safety
Return
Status of the calculation
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- MsPlateBucklingCurvedCompressiveData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedCompressiveData
-
- msPlateBucklingCurvedLongitudinalShearCombined(double, double, double, double, double, double, ABB.EdgeSupportType, double, ABB.MaterialBehaviour, double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling Curved Longitudinal Shear Combined
Computes margin of safety of a rectangular curved metallic panel in buckling under combined shear and longitudinal loads
Under compressive loads
Under compressive and shear loads, the interaction equation is:
RL^2 + RS^2 = 1.0
The Margin Safety is given by the following formula:
MS=2/(RL+sqrt(RL^2+4*RS^2))-1
where:
RL = sigma / sigma_cr is the stress ratio due to longitudinal stress, with:
sigma is the given longitudinal stress
sigma_cr is the compression stress allowable for buckling (sigma_cr < 0, as consequence RL < 0 in tension)
RS = tau / tau_cr is the stress ratio due to shear stress with:
tau is the given shear stress
tau_cr is the shear stress allowable for buckling (tau and tau_cr always positive)
Under tensile loads
Under tensile and shear loads, the interaction equation is:
1/2 * RL + RS = 1.0
The Margin Safety is given by the following formula:
MS = (2 - RL) / ( 2 * RS ) - 1
The panel edges are either clamped or simply supported.
- MsPlateBucklingCurvedLongitudinalShearCombinedData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedLongitudinalShearCombinedData
-
- msPlateBucklingCurvedShear(double, double, double, double, double, double, ABB.EdgeSupportType, double, ABB.MaterialBehaviour, double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling Curved Shear
Computes margin of safety of a curved metallic rectangular panel under shear load
The formula is MS = Allowable / |Stress| - 1
where:
'Allowable' is the compressive buckling stress allowable
'Stress' is the compressive stress (MS is not calculated in case of tensile stress),
'MS' is the margin of safety
Allowable = eta * PI^2*ks*E/(12*(1-nu^2)) * (t/c)^2
where
'ks' is the buckling coefficient
'E' is the Young modulus
'nu' is the elastic Poisson coefficient
't' is the panel thickness
'c' is the shorter panel dimension c = min(a,b)
'eta' is the plasticity reduction factor: SigmaAllowablePlastic = eta*SigmaAllowableElastic
eta = 1 if material is considered as elastic (Material behaviour = Elastic)
eta is obtained from the MetallicPanelCompressivePlasticityCurveBC1 charts if material is considered as elastic-plastic (Material behaviour = Elastic-Plastic):
SigmaAllowablePlastic/Sigma0.7 = f(SigmaAllowableElastic/Sigma0.7)
Sigma0.7 is the stress for secant modulus equal to 70% of Young modulus
Input
E Young modulus
nu Elastic Poisson coefficient
n Ramberg-Osgood parameter
a Longer panel dimension
b Shorter panel dimension
t Panel thickness
BC Type of support along edges
r Panel radius of curvature
behaviour Material behaviour
nblc Number of load cases
sigma Stress coming from load extraction
Output
sigmaAllowable Stress allowable
MS Margin of safety
Return
Status of the calculation
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- MsPlateBucklingCurvedShearData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedShearData
-
- MsPlateBucklingData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingData
-
- msPlateBucklingFlatBending(double, double, double, double, double, double, double, ABB.MaterialBehaviour, double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling Flat Bending
Computes margin of safety of a flat metallic rectangular panel under bending load
The formula is MS = sigmaAllowable / abs(sigma) - 1
where:
'sigmaAllowable' is the bending buckling stress allowable
'sigma' is the compressive stress at one edge of the panel, sigma = min( sigma1, sigma2 )
'MS' is the margin of safety
Allowable = eta * PI^2*kb*E/(12*(1-nu^2)) * (t/b)^2
where
'kb' is the bending buckling stress coefficient
'E' is the Young's modulus
'nu' is the elastic Poisson coefficient
't' is the panel thickness
'a' is the unloaded edge length
'b' is the loaded edge length
'beta' Loading length ratio, the factor which, divided by b, gives the edge length in compression (while the remaining edge length is in tension).
- MsPlateBucklingFlatBendingData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatBendingData
-
- msPlateBucklingFlatCompressive(double, double, double, double, double, double, ABB.UnloadedEdgeSupportType, ABB.EdgeSupportType, ABB.MaterialBehaviour, double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling Flat Compressive
Computes margin of safety of a flat metallic rectangular panel under compressive load
The formula is MS = sigmaAllowable / abs(sigma) - 1
where:
'sigmaAllowable' is the compressive buckling stress allowable,
'sigma' is the compressive stress (MS is not calculated in case of tensile stress),
'MS' is the margin of safety
Allowable = eta * PI^2*kc*E/(12*(1-nu^2)) * (t/b)^2
where
'kc' is the bending buckling stress coefficient
'E' is the Young's modulus
'nu' is the elastic Poisson coefficient
't' is the panel thickness
'a' is the unloaded edge length
'b' is the loaded edge length
'eta' is the plasticity reduction factor: SigmaAllowablePlastic = eta*SigmaAllowableElastic
eta = 1 if material is considered as elastic (Material behaviour = Elastic)
eta is obtain from following charts if material is considered as elastic-plastic (Material behaviour = Elastic-Plastic):
SigmaAllowablePlastic/Sigma0.7 = f(SigmaAllowableElastic/Sigma0.7)
MetallicPanelCompressivePlasticityCurveBC1 if the Boundary Condition for the unloaded edges is Simply Supported-Free,
MetallicPanelCompressivePlasticityCurveBC2 if the boundary condition for the unloaded edges is different of Simply Supported-Free
Input
E Young's modulus
nu Elastic Poisson coefficient
n Ramberg-Osgood parameter
a Unloaded edge length
b Loaded edge length
t Panel thickness
BC_Unloaded Type of support along unloaded edges {'Clamped-Clamped';'Simply Supported-Clamped';'Simply Supported-Simply Supported';'Free-Clamped';'Free-Simply Supported'}
BC_Loaded Type of support along loaded edges {'Clamped';'Simply Supported'}
behaviour Material behaviour
nblc Number of load cases
sigma Stress coming from load extractor
Output
sigmaAllowable Stress allowable
MS Margin of safety
Return
Status of the calculation
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- MsPlateBucklingFlatCompressiveData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatCompressiveData
-
- msPlateBucklingFlatLongitudinalBendingCombined(double, double, double, double, double, double, ABB.UnloadedEdgeSupportType, ABB.EdgeSupportType, ABB.MaterialBehaviour, double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling Flat Longitudinal Bending Combined
Computes margin of safety of a rectangular flat metallic panel in buckling under combined bending and longitudinal loads
This formula is derived from the interaction equation
Rb ^ 1.75 + Rc = 1.0
where:
Rc = sigmac / sigmacr is the stress ratio due to compression stress, with:
sigmac is the given longitudinal stress
sigmacr is the compression stress allowable for buckling
Rb = sigmab / sigmabcr is the stress ratio due to bending stress with
sigmab is the given compressive stress due to bending
sigmabcr is the bending stress allowable for buckling
Input
E Young's modulus
nu Elastic Poisson coefficient
n Ramberg-Osgood parameter
a Unloaded edge length
b Loaded edge length
beta Loading length ratio
t Panel thickness
BC_Unloaded Type of support along unloaded edges {'Clamped-Clamped';'Simply Supported-Clamped';'Simply Supported-Simply Supported';'Free-Clamped';'Free-Simply Supported'}
BC_Loaded Type of support along loaded edges {'Clamped';'Simply Supported'}
behaviour Material behaviour
nblc Number of load cases
sigma1 Stress XX Side1
sigma2 Stress XX Side2
Output
sigmacr Compressive stress allowable
sigmabcr Bending stress allowable
MS Margin of safety
Return
Status of the calculation
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- MsPlateBucklingFlatLongitudinalBendingCombinedData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalBendingCombinedData
-
- msPlateBucklingFlatLongitudinalShearCombined(double, double, double, double, double, double, ABB.UnloadedEdgeSupportType, ABB.EdgeSupportType, ABB.MaterialBehaviour, double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling Flat Longitudinal Shear Combined
Computes margin of safety of a rectangular flat metallic panel in buckling under combined shear and longitudinal loads
Under longitudinal and shear loads, the interaction equation is:
MS=2/(RL + sqrt(RL ^ 2 + 4 * RS ^ 2)
This formula is derived from the interaction equation RL+R2S=1.0
RL + RS ^ 2 = 1.0
where:
RL = sigma / sigmacr is the stress ratio due to longitudinal stress, with:
sigma is the given longitudinal stress
sigmacr is the compression stress allowable for buckling (sigmacr < 0, as consequence RL < 0 in tension)
RS = tau / taucr is the stress ratio due to shear stress with
tau is the given shear stress
taucr is the shear stress allowable for buckling (taucr and tau always positive)
The panel edges are either clamped or simply supported.
- MsPlateBucklingFlatLongitudinalShearCombinedData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalShearCombinedData
-
- msPlateBucklingFlatShear(double, double, double, double, double, double, ABB.EdgeSupportType, ABB.MaterialBehaviour, double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling Flat Shear
Computes margin of safety of a flat metallic rectangular panel under shear load
The formula is MS = sigmaAllowable / abs(sigma) - 1
where:
'sigmaAllowable' is the shear buckling stress allowable,
'sigma' is the compressive stress (MS is not calculated in case of tensile stress),
'MS' is the margin of safety
Allowable = eta * PI^2*ks*E/(12*(1-nu^2)) * (t/b)^2
where
'ks' is the bending buckling stress coefficient
'E' is the Young's modulus
'nu' is the elastic Poisson coefficient
't' is the panel thickness
'a' is the panel longer dimension
'b' is panel shorter dimension
'eta' is the plasticity reduction factor: SigmaAllowablePlastic = eta*SigmaAllowableElastic
eta = 1 if material is considered as elastic (Material behaviour = Elastic)
eta is obtain from following charts if material is considered as elastic-plastic (Material behaviour = Elastic-Plastic):
SigmaAllowablePlastic/Sigma0.7 = f(SigmaAllowableElastic/Sigma0.7)
MetallicPanelCompressivePlasticityCurveBC1, Warning: in fact graph is fig C5.13 but it is C5.7 graph divided by 2
Input
E Young's modulus
nu Elastic Poisson coefficient
n Ramberg-Osgood parameter
a Panel longer dimension
b Panel shorter dimension
t Panel thickness
BC Type of support along the edges {'Clamped';'Simply Supported'}
behaviour Material behaviour
nblc Number of load cases
sigma Stress coming from load extractor
Output
sigmaAllowable Stress allowable
MS Margin of safety
Return
Status of the calculation
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- msPlateBucklingFlatShearBendingCombined(double, double, double, double, double, double, ABB.UnloadedEdgeSupportType, ABB.EdgeSupportType, ABB.MaterialBehaviour, double[], double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Plate Buckling Flat Shear Bending Combined
Computes margin of safety of a rectangular flat metallic panel in buckling under combined bending and shear loads
Under longitudinal and shear loads, the interaction equation is:
MS = 1 / sqrt(Rb ^ 2 + Rs ^ 2)
This formula is derived from the interaction equation
Rb ^ 2 + Rs ^ 2 = 1.0
where:
Rb = sigmab / sigmabcr is the stress ratio due to bendoing stress with
sigmab is the given compressive stress due to bending
sigmabcr is the bending stress allowable for buckling
Rs = tau / taucr is the stress ratio due to shear stress with
tau is the given shear stress
taucr is the shear stress allowable for buckling (taucr and tau always positive)
Input
E Young's modulus
nu Elastic Poisson coefficient
n Ramberg-Osgood parameter
a Unloaded edge length
b Loaded edge length
t Panel thickness
BC_Unloaded Type of support along unloaded edges {'Clamped-Clamped';'Simply Supported-Clamped';'Simply Supported-Simply Supported';'Free-Clamped';'Free-Simply Supported'}
BC_Loaded Type of support along loaded edges {'Clamped';'Simply Supported'}
behaviour Material behaviour {'Elastic'; 'Elastic-Plastic'}
nblc Number of load cases
sigma1 Stress XX Side1
sigma2 Stress XX Side2
tau Stress XY
Output
taucr Shear stress allowable that takes into account compressive/tensile stress
sigmabcr Bending stress allowable
MS Margin of safety
Return
Status of the calculation
License requirements: nx_masterfem ("Finite Element Modeling")
Created in NX12.0.0
- MsPlateBucklingFlatShearBendingCombinedData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatShearBendingCombinedData
-
- MsPlateBucklingFlatShearData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatShearData
-
- MSPOWER_POINT - Static variable in class nxopen.issue.IssueAttachment.Type
-
Microsoft Power Point type
- msShearTearOut(double, double, double, double, double, double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Shear Tear Out
Computes margin of shear tear out (due to bolt hole)
The formula is MS = PShearTearOutAllowable / P - 1
'PShearTearOutAllowable' is the shear tear out load allowable.
- MsShearTearOutData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsShearTearOutData
-
- msTrescaPlaneStress(double, double[], double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Tresca.
- MsTrescaPlaneStressData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsTrescaPlaneStressData
-
- msTsaiHillPlaneStress(double, double, double, double, double, double[], double[], double[]) - Method in interface nxopen.cae.aerostructures.author.ABB
-
MS Tsai-Hill
Computes margin of safety on the basis of Tsai-Hill failure theory (plane stresses hypothesis)
The formula based on yield material allowables is 'MS=1-sqrt(((F_L)/FtcyL)^2+(FLT/FtcyLT)^2-((F_LF_(LT))/(FtcyLFtcyL))+(F_(S)/Fsy)^2)'
where:
L and LT are material directions: 'Longitudinal' and 'Longitudinal' 'Transverse'.
- MsTsaiHillPlaneStressData() - Constructor for class nxopen.cae.aerostructures.author.ABB.MsTsaiHillPlaneStressData
-
- msType() - Method in interface nxopen.motion.PackagingMeasureBuilder
-
- MSWORD - Static variable in class nxopen.issue.IssueAttachment.Type
-
Microsoft Word type
- MTD - Static variable in class nxopen.sim.SimDebugBuilder.DriverType
-
MTD driver
- mtdInit(UFVariant) - Method in interface nxopen.uf.UFSim
-
- mtdReset(UFVariant) - Method in interface nxopen.uf.UFSim
-
- mtx2() - Method in interface nxopen.UFSession
-
- mtx3() - Method in interface nxopen.UFSession
-
- mtx4(double[]) - Method in interface nxopen.uf.UFMtx3
-
- mtx4() - Method in interface nxopen.UFSession
-
- mtype() - Method in interface nxopen.MeasureDistanceBuilder
-
Returns the mtype
License requirements: None.
- muDynamic() - Method in interface nxopen.motion.JointFrictionLms
-
Returns the mu dynamic
License requirements: None.
- muDynamicExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the mu dynamic expression
License requirements: None.
- muDynamicExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the mu dynamic expression
License requirements: None.
- MULTI_CAD_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Parts mastered in a CAD system other than NX
- MULTI_CONVEX - Static variable in class nxopen.mechatronics.CollisionBodyBuilder.CollisionShapeTypes
-
Multi-Convex
- MULTI_FACE - Static variable in class nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder.Types
-
- MULTI_FACE_BLEND - Static variable in class nxopen.die.AddSurfBuilder.Methods
-
Face blend between sets of walls.
- MULTI_LINE_DIAGRAM - Static variable in class nxopen.ame.DocumentType
-
- MULTI_LINE_SCHEMATIC - Static variable in class nxopen.ame.Manage2dSymbolsBuilder.SymbolRepresentationTypes
-
- MULTI_LINE_SCHEMATICS - Static variable in class nxopen.ame.PageBuilder.Types
-
- MULTI_LINE_TEXT - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Multi-line text item
- MULTI_LIST - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Multi List item
- MULTI_LOOPS_EXISTED - Static variable in class nxopen.tooling.EdgePatchBuilder.PatchStatus
-
More than one loops existed in list
- MULTI_MODE - Static variable in class nxopen.ame.AmeOpticalConnectionFiberType
-
- MULTI_POINT_CONSTRAINT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- MULTI_POINT_CONSTRAINT_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- MULTI_PORT - Static variable in class nxopen.routing.Port.PortType
-
Multi Port
- MULTI_PROP_EXPRESSION - Static variable in class nxopen.uf.UFSf.MultiPropType
-
- MULTI_PROP_TABLE - Static variable in class nxopen.uf.UFSf.MultiPropType
-
- MULTI_SCALAR - Static variable in class nxopen.cae.Result.DataType
-
Multi scalar
- MULTI_SELECT_LIST - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- MULTI_TEXT_BOX - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- MULTI_TRANSITION - Static variable in class nxopen.geometricutilities.LawBuilder.Type
-
multi-transition law type
- MultiBendBendPropertiesBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Sheetmetal Multi Bend properties builder class.
- MultiBendBendPropertiesBuilder.Insets - Class in nxopen.features.sheetmetal
-
This enum defines the material inset types
- MultiBendBendPropertiesListBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Sheetmetal Multi Bend properties List builder class.
- multiBendPropertiesList() - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Returns the multi bend properties list
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- MultiBladeBaseGeometry - Interface in nxopen.cam
-
Represents a selectoin geometry Builder
This is an abstract class and cannot be instantiated.
- MultiBladeGeomBuilder - Interface in nxopen.cam
-
- MultiBladeGeomBuilder.PartAxisOfRotationTypes - Class in nxopen.cam
-
Available types for Part Axis of Rotation
- MultiBladeSplittersGeometry - Interface in nxopen.cam
-
Represents a selectoin list geometry Builder
This is an abstract class and cannot be instantiated.
- multiBlockDecomposition - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- multiBlockDecomposition - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- multiCADAssembly() - Method in interface nxopen.drawings.ConversionProcessSettingsBuilder
-
Returns the multi-CAD assembly
License requirements: None.
- MULTICAST - Static variable in class nxopen.mechatronics.UDPSignalServerBuilder.CastMode
-
- multiChannelTurningLeadDistance() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the multi-channel turning lead distance
License requirements: None.
- multiChannelTurningMode() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the multi-channel turning mode
License requirements: None.
- multiChannelTurningSecondTool() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the multi-channel turning second tool
License requirements: None.
- multiCurve() - Method in interface nxopen.geometricanalysis.CurveContinuityBuilder
-
Returns the multiple curve
License requirements: None.
- MULTICURVE - Static variable in class nxopen.geometricanalysis.CurveContinuityBuilder.Type
-
multicurve
- multiDepthCut() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Multi Depth Cut
License requirements: None.
- MultiDepthCut - Interface in nxopen.cam
-
- MultiDepthCut.Types - Class in nxopen.cam
-
Available types for Multi-Depth cut type
- MultiDraft - Interface in nxopen.geometricutilities
-
Represents a multi-draft.
- MultiDraft.AngleOption - Class in nxopen.geometricutilities
-
Represents the angle option.
- multiFace() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the objects for multi-face
License requirements: None.
- MultiFlange - Interface in nxopen.features.sheetmetal
-
Represents a multi flange feature
To create or edit an instance of this class, use
MultiFlangeBuilder
Created in NX12.0.0
- MultiFlangeBuilder - Interface in nxopen.features.sheetmetal
-
- MultiFlangeBuilder.MatchFaceOptions - Class in nxopen.features.sheetmetal
-
This enum defines the mathc face options
- MULTILINE - Static variable in class nxopen.ame.GeneralAnnotationSettingsBuilder.AnnotationSeparator
-
- MultilineString - Interface in nxopen.blockstyler
-
Represents a Multiline String block .
- multiPasses() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the multi passes
License requirements: None.
- MultiPatchAlignmentBuilder - Interface in nxopen.facet
-
Aligns multiple facet bodies to one another without using reference points.
- MultiPatchAlignmentBuilder.ResolutionType - Class in nxopen.facet
-
Determines the number of facets used in the alignment.
- MULTIPLE - Static variable in class nxopen.cae.AfuMathOperation.MultiType
-
Multiples AFU records
- MULTIPLE - Static variable in class nxopen.cam.FlowBuilder.FlowOffsetModeType
-
Multiple Offsets
- MULTIPLE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.RegionMachiningTypes
-
Region Machining type: Multiple
- MULTIPLE - Static variable in class nxopen.cam.StepoverBuilder.StepoverTypes
-
Multiple
- multiple() - Method in interface nxopen.CGMBuilder
-
Returns the multiple option is used when more than one drawing is exported.
- MULTIPLE - Static variable in class nxopen.features.IsoclineCurveBuilder.CurveTypes
-
- MULTIPLE - Static variable in class nxopen.features.shipdesign.PenetrationRequest.RequestType
-
- MULTIPLE - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.SectionsPerDrawingOptions
-
- MULTIPLE - Static variable in class nxopen.features.ThroughCurvesBuilder.PatchTypes
-
multiple patches.
- MULTIPLE - Static variable in class nxopen.geometricutilities.MultiDraft.AngleOption
-
Multi draft
- MULTIPLE - Static variable in class nxopen.weld.WeldPointMethod
-
use guide curve(s) or edge(s) to generate spot weld points
- MULTIPLE_COPLANAR_SKETCHES - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
This composite curve feature is based on multiple coplanar source sketches.
- MULTIPLE_CURVES - Static variable in class nxopen.cae.SimBcXyPlotBuilder.ResolveMultipleMatches
-
- MULTIPLE_CURVES_JOINED_INTO_ONE_LINKED_CURVE - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature has atleast one linked curve that is the result of joining multiple source curves.
- MULTIPLE_CUTOFF_FIRST - Static variable in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes
-
multiple backburn passes - cutoff first
- MULTIPLE_CUTOFF_FIRST - Static variable in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes
-
multiple backburn passes - cutoff first
- MULTIPLE_DIMENSION - Static variable in class nxopen.annotations.BaseOrdinateDimensionBuilder.Types
-
group or set of dimensions
- MULTIPLE_FACE_BLEND - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Create multiple face blend surface.
- MULTIPLE_FEATURES - Static variable in class nxopen.features.PatchOpeningsBuilder.OutputTypes
-
Output one feature for each patch sheet body
- MULTIPLE_INSTANCE_OF_ASOURCE_PART - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature has at least two linked curves that come from multiple instances of the same source part.
- MULTIPLE_REGION_FIRST - Static variable in class nxopen.cam.WedmGeomBuilder.BackburnPassesTypes
-
multiple backburn passes - region first
- MULTIPLE_REGION_FIRST - Static variable in class nxopen.cam.WedmOperationBuilder.BackburnPassesTypes
-
multiple backburn passes - region first
- MULTIPLE_SEGMENTS - Static variable in class nxopen.features.TubeBuilder.Output
-
multiple segments output
- MULTIPLE_SKETCHES_WITH_NON_PARALLEL_NORMALS - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature has curves that come from multiple sketches whose plane normals are not parallel.
- MULTIPLE_STOCKS_FOUND_IN_REUSE_LIBRARY - Static variable in class nxopen.routing.StockDataRefreshBuilder.RefreshStatus
-
More than one stock found - cannot resolve ambiguity
- MULTIPLE_XFORM - Static variable in class nxopen.features.SketchConversionStatus.ReasonType
-
The linked feature has multiple linking data.
- multipleBuilder() - Method in interface nxopen.cam.StepoverBuilder
-
Returns the multiple builder
License requirements: None.
- multipleCenterMarks() - Method in interface nxopen.annotations.BaseCenterMarkBuilder
-
Returns the multiple center marks option, applicable only for creation
License requirements: None.
- multipleComponents() - Method in interface nxopen.tooling.CopySolidBuilder
-
Returns the multiple components
License requirements: None.
- multipleCurveOrEdgeCollector() - Method in interface nxopen.features.PointSetBuilder
-
Returns the collector that is used to hold multiple curves or edges.
- MultipleDatum() - Constructor for class nxopen.uf.UFGdt.MultipleDatum
-
- MultipleDatum(int, Tag[], Tag) - Constructor for class nxopen.uf.UFGdt.MultipleDatum
-
- multipleEdit() - Method in interface nxopen.blockstyler.SetList
-
Returns the MultipleEdit
License requirements: None.
- MultipleElementCreateBuilder - Interface in nxopen.cae
-
- multipleFaceCollector() - Method in interface nxopen.features.PointSetBuilder
-
Returns the collector that is used to hold faces.
- multipleFaceCollector() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the multiple face for non planar face
License requirements: None.
- MULTIPLEFLUID - Static variable in class nxopen.PhysicalMaterial.Type
-
Multiple fluid material
- multipleFp - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- multipleMatches() - Method in interface nxopen.cae.SimBcXyPlotBuilder
-
- MultipleNodeCreateBuilder - Interface in nxopen.cae
-
- MultipleObjectsBuilder - Interface in nxopen.ame
-
JA class for the insert Eng object dialog
This is an abstract class, and cannot be instantiated.
- multiplePasses() - Method in interface nxopen.cam.PlanarMillingBuilder
-
Returns the Multiple Passes builder
License requirements: None.
- MultiplePassesBuilder - Interface in nxopen.cam
-
Represents a MultiplePassesBuilder .
- MultiplePassesBuilder.OrderTypes - Class in nxopen.cam
-
Available types for Order
- MultiplePassesBuilder.StepMethodTypes - Class in nxopen.cam
-
Available types for Step Method
- multipleSelection - Variable in class nxopen.Selection.SelectionDescriptor
-
- multipleSelectionEndBoundary() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
Returns the multiple end boundary objects.
- MultipleStepoverBuilder - Interface in nxopen.cam
-
Represents a Builder which holds the data for a set of individual number of passes and
stepover distance.
- MultipleStepoverBuilder.Data - Class in nxopen.cam
-
- multipleViewPlacement() - Method in interface nxopen.drawings.DrawingViewBuilder
-
Returns the multiple view placement
License requirements: None.
- multipleViewPlacement() - Method in interface nxopen.drawings.StandardViewsBuilder
-
Returns the multiple view placement
License requirements: None.
- multipleViewPlacement() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the multiple view placement
License requirements: None.
- MultipleViewPlacementBuilder - Interface in nxopen.drawings
-
This builder allows the user to create a Multiple View Placement .
- MultipleViewPlacementBuilder.Option - Class in nxopen.drawings
-
The placement option type
- multiplicity - Variable in class nxopen.uf.UFCurve.Proj
-
- multiplier() - Method in interface nxopen.mechatronics.ExternalConnectionElementBuilder
-
Returns the multiplier.
- MULTIPLY - Static variable in class nxopen.geometricutilities.PatternIncrementItem.OperationEnum
-
multiply the increment to the master value.
- multiply(Matrix3x3, Vector3d) - Method in interface nxopen.MathUtils
-
Returns a vector which is the product of a 3x3 matrix and a 3D vector
License requirements: None.
- multiply(Matrix3x3, Point3d) - Method in interface nxopen.MathUtils
-
Returns a point which is the product of a 3x3 matrix and a 3D point
License requirements: None.
- MULTIPLY - Static variable in class nxopen.mechatronics.GanttOperationParameterBuilder.OperatorOption
-
Multiply operator '*='
- multiply(double[], double[]) - Method in interface nxopen.uf.UFMtx2
-
- multiply(double[], double[]) - Method in interface nxopen.uf.UFMtx3
-
- multiply(double[], double[]) - Method in interface nxopen.uf.UFMtx4
-
- multiplyMatrices(double[], double[]) - Method in interface nxopen.uf.UFTrns
-
- multiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx2
-
- multiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx3
-
- multiplyT(double[], double[]) - Method in interface nxopen.uf.UFMtx4
-
- multiPort() - Method in interface nxopen.routing.ModelTerminalsBuilder
-
Returns the MultiPort of the selected object
License requirements: routing_harness ("Routing Harness")
.
- MultiPort - Interface in nxopen.routing
-
- multiPort() - Method in interface nxopen.routing.TerminalPort
-
Returns the parent
MultiPort
of the
TerminalPort
License requirements: routing_base ("Routing Basic")
Created in NX4.0.0
- MultiPortCollection - Interface in nxopen.routing
-
Represents a collection of
MultiPort
objects.
- multiPorts() - Method in interface nxopen.routing.RouteManager
-
MultiPort Collection .
- multiPositionBuilder() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the multi position builder.
- MultiRamp - Interface in nxopen.cam
-
- multiRamp() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the multi ramp
License requirements: None.
- MultiRamp.Types - Class in nxopen.cam
-
the multi ramp pattern types .
- MultiSectionBuilder - Interface in nxopen.tooldesigner
-
A class that used for creating multi section
To create a new instance of this class, use nxopen.ToolDesigner.ToolDesignerManager#createMultiSectionBuilder
Default values.
- MultiSelectList - Interface in nxopen.uistyler
-
Represents a MultiSelectList for UI Styler .
- MultiSelectList.Activate - Interface in nxopen.uistyler
-
- MultiSelectList.DoubleClick - Interface in nxopen.uistyler
-
Called when a dialog user selects an entry with a single mouse click or presses the spacebar
on a selected item.
- MultiTextBox - Interface in nxopen.uistyler
-
Represents a MultiTextBox for UI Styler.
- MultiToolBuilder - Interface in nxopen.cam
-
- multiToolDescription() - Method in interface nxopen.cam.MultiToolBuilder
-
Returns the multi tool description
License requirements: None.
- multiTransitionLaw() - Method in interface nxopen.geometricutilities.LawBuilder
-
Returns the multi transition law.
- MultiTransitionLawBuilder - Interface in nxopen.geometricutilities
-
Represents multiple transition law.
- MultiValueObjectsPort - Interface in nxopen.ame
-
MultiValueObjectsPort Journaling class
This object does not need a creator.
- MultiValueObjectsPort.JaAmeValueObjectUsageType - Class in nxopen.ame
-
type which usagetype has to be used
- MUST_BE_B_SURFACE - Static variable in class nxopen.uf.UFConstants
-
- MUST_BE_SINGLE_FACE - Static variable in class nxopen.uf.UFConstants
-
- MUST_BE_UNTRIMMED_FACE - Static variable in class nxopen.uf.UFConstants
-
- muStatic() - Method in interface nxopen.motion.JointFrictionLms
-
Returns the mu static
License requirements: None.
- muStaticExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the mu static expression
License requirements: None.
- muStaticExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the mu static expression
License requirements: None.
- mvalue() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns a number of rows into which quad element to be split
License requirements: nx_masterfem ("Finite Element Modeling")
.
- MW_COMPONENT_NAME - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.AttributeNames
-
- MW_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- MW_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- MW_SIDE - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.AttributeNames
-
- mwcopySheets() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MWCopySheetsCollection instance belonging to this part .
- MWCopySheetsBuilder - Interface in nxopen.tooling
-
- MWCopySheetsBuilder.Types - Class in nxopen.tooling
-
This enum represents the type of sheets to be copied
- MWCopySheetsCollection - Interface in nxopen.tooling
-
Represents a collection of MWCopySheets builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- mwdefineRegions() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MWDefineRegionsCollection instance belonging to this part .
- MWDefineRegionsBuilder - Interface in nxopen.tooling
-
- MWDefineRegionsBuilder.OrCreateEmptyRegionData - Class in nxopen.tooling
-
- MWDefineRegionsBuilder.TranslucencyOptionType - Class in nxopen.tooling
-
This enum represents the translucency is to be performed on the selected or non-selected region faces
- MWDefineRegionsCollection - Interface in nxopen.tooling
-
Represents a collection of MWDefineRegions builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- mwdefineSheets() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MWDefineSheetsCollection instance belonging to this part .
- MWDefineSheetsBuilder - Interface in nxopen.tooling
-
- MWDefineSheetsBuilder.DefineStepType - Class in nxopen.tooling
-
The define steps for defining Cavity and Core using the Split Body method.
- MWDefineSheetsBuilder.Types - Class in nxopen.tooling
-
The types for defining Cavity and Core.
- MWDefineSheetsCollection - Interface in nxopen.tooling
-
Represents a collection of MWDefineSheets builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- mwdesignGuideLines() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MWDesignGuideLinesCollection instance belonging to this part .
- MWDesignGuideLinesBuilder - Interface in nxopen.tooling
-
The builder for designing guide lines in Mold Wizard.
- MWDesignGuideLinesBuilder.CreateGuideLineData - Class in nxopen.tooling
-
- MWDesignGuideLinesBuilder.DirectionType - Class in nxopen.tooling
-
The type of direction for the guide line to be created.
- MWDesignGuideLinesCollection - Interface in nxopen.tooling
-
Represents a collection of MWDesignGuideLines builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- mwdesignPartingSurface() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MWDesignPartingSurfaceCollection instance belonging to this part .
- MWDesignPartingSurfaceBuilder - Interface in nxopen.tooling
-
The builder for designing parting surface in Mold Wizard.
- MWDesignPartingSurfaceBuilder.ObjectType - Class in nxopen.tooling
-
The type of parting objects to be edited or placed.
- MWDesignPartingSurfaceBuilder.PartingSurfaceType - Class in nxopen.tooling
-
The type of parting surface to be created.
- MWDesignPartingSurfaceBuilder.TransitionSurfaceType - Class in nxopen.tooling
-
The type of transition surface to be created.
- MWDesignPartingSurfaceBuilder.TrimAndExtendFromRegionType - Class in nxopen.tooling
-
The region type from which to trim and extend when creating parting surface.
- MWDesignPartingSurfaceCollection - Interface in nxopen.tooling
-
Represents a collection of MWDesignPartingSurface builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- MWLayoutCollection - Interface in nxopen.tooling
-
Creates Mold Wizard layout collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- mwLayoutType() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the layout pattern type
License requirements: None.
- mwmoldedPartValidation() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MWMoldedPartValidationManager instance belonging to this part .
- MWMoldedPartValidationBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to perform Molded Part Validation analysis.
- MWMoldedPartValidationBuilder.AssignToRegion - Class in nxopen.tooling
-
Options for assigning faces to the Cavity or Core region
- MWMoldedPartValidationBuilder.CalculateOption - Class in nxopen.tooling
-
Calculation options
- MWMoldedPartValidationBuilder.CheckScope - Class in nxopen.tooling
-
Check scope for information
- MWMoldedPartValidationBuilder.RangeType - Class in nxopen.tooling
-
Range type for displaying small corner radius faces
- MWMoldedPartValidationManager - Interface in nxopen.tooling
-
Represents a manager of the MWMoldedPartValidation builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- mwpartingManager() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MWPartingManagerCollection instance belonging to this part .
- MWPartingManagerBuilder - Interface in nxopen.tooling
-
- MWPartingManagerBuilder.DataStatus - Class in nxopen.tooling
-
The status of the parting manager data.
- MWPartingManagerBuilder.RegisterType - Class in nxopen.tooling
-
The type of registering UNDO identifier.
- MWPartingManagerCollection - Interface in nxopen.tooling
-
Represents a collection of MWPartingManager builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- MWSearchRegionBuilder - Interface in nxopen.tooling
-
The Search Region builder is for defining a region by searching the region faces given a set of seed faces and boundary edges.
- MWSearchRegionCollection - Interface in nxopen.tooling
-
Represents a collection of MWSearchRegion builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- mwsearchRegions() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MWSearchRegionCollection instance belonging to this part .
- mwtraversePartingLines() - Method in interface nxopen.tooling.ToolingManager
-
Returns the MWTraversePartingLinesCollection instance belonging to this part .
- MWTraversePartingLinesBuilder - Interface in nxopen.tooling
-
- MWTraversePartingLinesCollection - Interface in nxopen.tooling
-
Represents a collection of the MWTraversePartingLines builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.0.0
- MWUpdate - Interface in nxopen
-
Update tools used in Mold Wizard for the Journamation layer .
- MX - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- MXDIR - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.Direction
-
Negative X alignment direction
- MXDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
Align feature in the negitive X direction
- MXDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
-
Rotate in the negitive X direction
- MXXSHELL_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- MXY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- MXYSHELL_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- MXZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- MY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- MYDIR - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.Direction
-
Negative Y alignment direction
- MYDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
Align feature in the negitive Y direction
- MYDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
-
Rotate in the negitive Y direction
- MYYSHELL_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- MYZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- MZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- MZDIR - Static variable in class nxopen.cam.InspectionAlignmentAssistantBuilder.Direction
-
Negative Z alignment direction
- MZDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignmentDirections
-
Align feature in the negitive Z direction
- MZDIR - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationDirections
-
Rotate in the negitive Z direction