- T - Static variable in class nxopen.cae.FEModelOccAttribute.AltRepMassUnitType
-
Mass unit of tonnes
- T - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles
-
T-Style
- T - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
T
- t - Variable in class nxopen.uf.UFSo.OffsetCurveCvtrData
-
- T - Static variable in class nxopen.weld.FilletBuilder.EnumWeldingType
-
- T1 - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
T1
- T2 - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
T2
- T2D - Static variable in class nxopen.linedesigner.ExportPlantToDWGBuilder.SaveAsType
-
Represents the 2D type
- T2D - Static variable in class nxopen.linedesigner.ExportToDWGBuilder.SaveAsTypeAPI
-
Represents the 2D type
- T3D - Static variable in class nxopen.linedesigner.ExportPlantToDWGBuilder.SaveAsType
-
Represents the 3D type
- T3D - Static variable in class nxopen.linedesigner.ExportToDWGBuilder.SaveAsTypeAPI
-
Represents the 3D type
- Tab - Interface in nxopen.features
-
Represents a Tab feature
To create or edit an instance of this class, use
TabBuilder
Created in NX5.0.0
- TAB_CONTROL - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- TAB_CONTROL - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Tab Control item
- TAB_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- TabBuilder - Interface in nxopen.features.sheetmetal
-
Represents a Tab feature builder.
- TabBuilder.SectionSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the side of the section that the dimple punches material.
- TabBuilder.ThicknessSideOptions - Class in nxopen.features.sheetmetal
-
This enum represents the extent direction for the Tab.
- TabControl - Interface in nxopen.blockstyler
-
Represents a Tab Control layout .
- TabControl - Interface in nxopen.uistyler
-
Represents a Tab Control for UI Styler.
- TabControl.SwitchHandler - Interface in nxopen.uistyler
-
Called when a user switches tabs.
- TabCurveTypeDisplayData() - Constructor for class nxopen.preferences.PartSheetmetal.TabCurveTypeDisplayData
-
- TabCurveTypeDisplayData(PartSheetmetal.TabCurveType, int, NXColor, DisplayableObject.ObjectFont, DisplayableObject.ObjectWidth) - Constructor for class nxopen.preferences.PartSheetmetal.TabCurveTypeDisplayData
-
Constructor for the TabCurveTypeDisplayData object.
- tabDetection() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the flag that indicates if internal tabbed faces can be shown or not.
- tabDetection() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the flag that indicates if internal tabbed faces can be shown or not.
- tabDirection() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the tab direction
License requirements: None.
- TABLE - Static variable in class nxopen.annotations.PmiFilterByType.Type
-
Indicates a PMI Table Type
- TABLE - Static variable in class nxopen.annotations.PmiPreferences.PreferenceSymbolTypes
-
table
- Table - Interface in nxopen.annotations
-
- Table - Interface in nxopen.blockstyler
-
Represents a Table layout .
- TABLE - Static variable in class nxopen.cae.Function.Type
-
Function created by referencing an AFU record
- Table - Interface in nxopen.diagramming.tables
-
Represents the Table class.
- TABLE - Static variable in class nxopen.drawings.DrawingRegionBuilder.RegionDraftingObjectType
-
- TABLE - Static variable in class nxopen.openxml.DocumentData.Type
-
the document data type of table
- TABLE - Static variable in class nxopen.preferences.RoutingPartLibrary.NodeType
-
Part table node.
- TABLE - Static variable in class nxopen.preferences.RoutingPath.RadiusMethod
-
Use radius obtained from a bend table lookup
- TABLE - Static variable in class nxopen.routing.BendCornerCollection.Type
-
Using a bend table to create a
bend corner.
- table - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- Table.InsertColumnsType - Class in nxopen.annotations
-
Represents mode of insertion of a column
- Table.InsertRowsType - Class in nxopen.annotations
-
Represents mode of insertion of a row
- TABLE_CELL - Static variable in class nxopen.openxml.DocumentData.Type
-
the document data type of table cell
- TABLE_FILE - Static variable in class nxopen.cae.connections.DiameterType
-
Table defined diameter
- TABLE_OF_CONTENT - Static variable in class nxopen.ame.DocumentType
-
- TABLE_OF_CONTENT - Static variable in class nxopen.ame.PageBuilder.Types
-
- tableAddHole() - Method in interface nxopen.tooling.HoleReportBuilder
-
Returns the holes to add to the table
License requirements: None.
- TableBuilder - Interface in nxopen.diagramming.tables
-
Represents a TableBuilder.
- TableBuilder.FillColorData - Class in nxopen.diagramming.tables
-
- TableBuilder.InheritOption - Class in nxopen.diagramming.tables
-
Represents the inherit option.
- tableCell() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the cell style builder
License requirements: None.
- TableCellData - Interface in nxopen.openxml
-
Represents the table cell to be exported to the speific Open XML file.
- tableCellStyle() - Method in interface nxopen.annotations.TableStyleBuilder
-
Returns the cell style builder
License requirements: None.
- tableCellStyle() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the table cell style builder
License requirements: None.
- TableCellStyleBuilder - Interface in nxopen.annotations
-
- TableCellStyleBuilder.BorderLocationType - Class in nxopen.annotations
-
the valid border location types
- TableCellStyleBuilder.CellFormatTypes - Class in nxopen.annotations
-
the cell format types
- TableCellStyleBuilder.DateFormatTypes - Class in nxopen.annotations
-
the date format types
- TableCellStyleBuilder.FitMethodType - Class in nxopen.annotations
-
the fit method types
- TableCellStyleBuilder.FormatType - Class in nxopen.annotations
-
- TableCellStyleBuilder.TabDirectionType - Class in nxopen.annotations
-
the valid tab direction
- TableCellStyleBuilder.TextAlignmentType - Class in nxopen.annotations
-
the valid text alignment types
- TableCellStyleBuilder.TimeFormatTypes - Class in nxopen.annotations
-
the time format types
- TableCellStyleBuilder.ZeroDisplayType - Class in nxopen.annotations
-
the valid zero display types
- TableCollection - Interface in nxopen.annotations
-
Represents a collection of
Table
objects
To obtain an instance of this class, refer to
AnnotationManager
Created in NX8.0.0
- TableCollection - Interface in nxopen.diagramming.tables
-
Represents a collection of Table.
- tableColumn() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the table column builder
License requirements: None.
- TableColumnBuilder - Interface in nxopen.annotations
-
- TableColumnBuilder.CategoryType - Class in nxopen.annotations
-
The options specify the type of column.
- TableColumnBuilder.ScopeType - Class in nxopen.annotations
-
The options determine whether to apply settings to all cells or only to cells of new rows.
- tableCompare() - Method in interface nxopen.drawings.DrawingCompareSettingsBuilder
-
- tableCutSheet() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the table cut sheet builder
License requirements: None.
- TableData() - Constructor for class nxopen.cae.FunctionBuilder.TableData
-
- TableDocumentData - Interface in nxopen.openxml
-
Represents the table to be exported to the speific Open XML file.
- TableDocumentData.CaptionData - Class in nxopen.openxml
-
- TableDocumentData.CaptionPosition - Class in nxopen.openxml
-
the location of the caption for table data
- TableEditorDefaultDataProvider - Interface in nxopen
-
Provides basic data for a Table Editor block.
- TableEditSettingsBuilder - Interface in nxopen.annotations
-
- tableEnd - Variable in class nxopen.uf.UFDraw.TabnotEvalData
-
- tableFile() - Method in interface nxopen.cae.connections.IDiameter
-
Returns the table file used to compute the diameter
License requirements: None.
- tableHole() - Method in interface nxopen.tooling.HoleReportBuilder
-
Returns the holes in window to create hole report
License requirements: None.
- tableLettering() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the lettering style builder
License requirements: None.
- tableLineArrow() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the line arrow style builder
License requirements: None.
- tableOrigin() - Method in interface nxopen.tooling.HoleReportBuilder
-
Returns the table origin
License requirements: None.
- tablePinList() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the table pin list builder
License requirements: None.
- tableRotationsAtSafePlane() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to do table rotations at safe plane
License requirements: None.
- tables() - Method in interface nxopen.annotations.AnnotationManager
-
Table collection .
- tables() - Method in interface nxopen.diagramming.DiagrammingManager
-
- TABLES - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter
-
Tables Report Filter
- tables - Variable in class nxopen.uf.UFRoute.AskLoadedBendTablesData
-
- tablesCellSettings() - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
Returns the preferences tabular note settings builder
License requirements: nx_pid_design_reader ("NX P and ID Design Reader") OR nx_pid_design_author ("NX P and ID Design Author")
.
- tableSection() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the section style builder
License requirements: None.
- TableSection - Interface in nxopen.annotations
-
- tableSection() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the table section style builder
License requirements: None.
- TableSectionBuilder - Interface in nxopen.annotations
-
- TableSectionCollection - Interface in nxopen.annotations
-
- tableSections() - Method in interface nxopen.annotations.AnnotationManager
-
Table section collection .
- tableSectionStyle() - Method in interface nxopen.annotations.TableStyleBuilder
-
Returns the section style builder
License requirements: None.
- TableSectionStyleBuilder - Interface in nxopen.annotations
-
- TableSectionStyleBuilder.AlignmentPositionType - Class in nxopen.annotations
-
Represents the alignment position type
- TableSectionStyleBuilder.ContinuationPropertyType - Class in nxopen.annotations
-
Represents the section continuation property
- TableSectionStyleBuilder.DisplayContinuationNoteType - Class in nxopen.annotations
-
Represents the display continuation note choices
- TableSectionStyleBuilder.LocationOfHeader - Class in nxopen.annotations
-
Represents the section header location choices
- tableSettingsBuilder() - Method in interface nxopen.diagramming.tables.TableBuilder
-
Returns the table settings.
- TableSettingsBuilder - Interface in nxopen.diagramming.tables
-
Represents a TableSettingsBuilder.
- tableStart - Variable in class nxopen.uf.UFDraw.TabnotEvalData
-
- TableStyleBuilder - Interface in nxopen.annotations
-
- tableView() - Method in interface nxopen.tooling.HoleReportBuilder
-
Returns the view to create hole report
License requirements: None.
- TABLOID - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.PageSizeType
-
- TABLOID - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.PageSizeType
-
- TABLOID - Static variable in class nxopen.PrintBuilder.PaperSize
-
Tabloid, 11- by 17-inches
- TABLOID_EXTRA - Static variable in class nxopen.PrintBuilder.PaperSize
-
Tabloid, 11.69 x 18-inches
- tabMethod() - Method in interface nxopen.cam.TabPointDataBuilder
-
Returns the tab method option
License requirements: cam_base ("CAM BASE")
.
- tabnot() - Method in interface nxopen.UFSession
-
- TABNOT_BORDER_TYPE_DOUBLE - Static variable in class nxopen.uf.UFDraw.TabnotBorderType
-
- TABNOT_BORDER_TYPE_NONE - Static variable in class nxopen.uf.UFDraw.TabnotBorderType
-
- TABNOT_BORDER_TYPE_SINGLE - Static variable in class nxopen.uf.UFDraw.TabnotBorderType
-
- TABNOT_JUST_BOTTOM - Static variable in class nxopen.uf.UFDraw.TabnotJust
-
- TABNOT_JUST_CENTER - Static variable in class nxopen.uf.UFDraw.TabnotJust
-
- TABNOT_JUST_LEFT - Static variable in class nxopen.uf.UFDraw.TabnotJust
-
- TABNOT_JUST_MIDDLE - Static variable in class nxopen.uf.UFDraw.TabnotJust
-
- TABNOT_JUST_RIGHT - Static variable in class nxopen.uf.UFDraw.TabnotJust
-
- TABNOT_JUST_TOP - Static variable in class nxopen.uf.UFDraw.TabnotJust
-
- TabnotCell() - Constructor for class nxopen.uf.UFDraw.TabnotCell
-
- TabnotCell(int, int) - Constructor for class nxopen.uf.UFDraw.TabnotCell
-
- TabnotCellEvalData() - Constructor for class nxopen.uf.UFDraw.TabnotCellEvalData
-
- TabnotCellEvalData(double[], String) - Constructor for class nxopen.uf.UFDraw.TabnotCellEvalData
-
- TabnotCellParams() - Constructor for class nxopen.uf.UFDraw.TabnotCellParams
-
- TabnotCellParams(String, String, double, UFDraw.TabnotJust, UFDraw.TabnotJust, double, boolean, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.uf.UFDraw.TabnotCellParams
-
- TabNoteCfgBuilder - Interface in nxopen.features
-
- TabNoteCfgBuilder.Refplane - Class in nxopen.features
-
the reference plane type.
- tabNoteGroup() - Method in interface nxopen.features.shipdesign.KnuckledProfilesBuilder
-
Returns the tab note group
License requirements: None.
- tabNoteGroup() - Method in interface nxopen.features.shipdesign.VentHolesMarkingBuilder
-
Returns the tab note group
License requirements: None.
- tabnotes - Variable in class nxopen.uf.UFTabnotF.IndandfixoutofsynchspreadsheettabnotesData
-
- TabnotEvalData() - Constructor for class nxopen.uf.UFDraw.TabnotEvalData
-
- TabnotEvalData(UFDraw.TabnotCell, UFDraw.TabnotCell, int, UFDraw.TabnotLine[]) - Constructor for class nxopen.uf.UFDraw.TabnotEvalData
-
- tabnotF() - Method in interface nxopen.UFSession
-
- TabnotLine() - Constructor for class nxopen.uf.UFDraw.TabnotLine
-
- TabnotLine(double[], double[]) - Constructor for class nxopen.uf.UFDraw.TabnotLine
-
- TabnotParams() - Constructor for class nxopen.uf.UFDraw.TabnotParams
-
- TabnotParams(double[], UFDraw.TabnotCell, UFDraw.TabnotCell, UFDraw.TabnotCell, double, UFDraw.TabnotBorderType, double, boolean, boolean, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.uf.UFDraw.TabnotParams
-
- TabPointDataBuilder - Interface in nxopen.cam
-
- TabPointDataBuilder.TabMethodType - Class in nxopen.cam
-
Tab Point Method Options
- TabPointDataBuilder.TabThreadMethodType - Class in nxopen.cam
-
Tab Thread Point Options
- TabPointDataBuilderList - Interface in nxopen.cam
-
Represents a list of objects.
- tabPointList() - Method in interface nxopen.cam.WedmCustomBoundaryDataBuilder
-
Returns the tab point data list
License requirements: cam_base ("CAM BASE")
.
- tabsPerRow() - Method in interface nxopen.blockstyler.TabControl
-
Returns the TabsPerRow
License requirements: None.
- tabThreadMethod() - Method in interface nxopen.cam.TabPointDataBuilder
-
Returns the tab thread method option
License requirements: cam_base ("CAM BASE")
.
- tabThreadPoint() - Method in interface nxopen.cam.TabPointDataBuilder
-
Returns the tab thread point
License requirements: cam_base ("CAM BASE")
.
- TABULAR - Static variable in class nxopen.cae.NodeElementInfoBuilder.FormatType
-
Tabular
- tabularNote() - Method in interface nxopen.annotations.TableEditSettingsBuilder
-
Returns the tabular note style builder
License requirements: None.
- tabularNoteStyle() - Method in interface nxopen.annotations.TableStyleBuilder
-
Returns the tabular note style builder
License requirements: None.
- tabularNoteStyle() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the tabular note style builder
License requirements: None.
- TabularNoteStyleBuilder - Interface in nxopen.annotations
-
- TabularNoteStyleBuilder.ShowLockedDeletedRowMethod - Class in nxopen.annotations
-
the valid locked deleted row methods
- tabWidth() - Method in interface nxopen.cam.TabPointDataBuilder
-
Returns the tab Width
License requirements: cam_base ("CAM BASE")
.
- TACTION_COHEASIVE - Static variable in class nxopen.cae.Result.Quantity
-
- TADDR_PARAM - Static variable in class nxopen.ame.PlcDataType
-
- TAG - Static variable in class nxopen.ame.OrderAspectsBuilder.OrderType
-
- TAG - Static variable in class nxopen.ame.PortBuilder.ConnectableAttrProxyObjectType
-
- TAG - Static variable in class nxopen.features.CustomAttribute.Type
-
Reference.
- Tag - Class in nxopen
-
A tag used to identify an object within NX
- Tag(int) - Constructor for class nxopen.Tag
-
Constructs a Tag
- tag() - Method in interface nxopen.TaggedObject
-
Returns the Tag for this object
- TAG - Static variable in class nxopen.uf.UFKf.Type
-
- TAG - Static variable in class nxopen.Validation.MapType
-
NX Object identifier map
- TAG_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- TAG_OBJECT - Static variable in class nxopen.visualreporting.VisualReport.ReportingStyleOption
-
Matching objects will be tagged
- TAG_VLA - Static variable in class nxopen.features.CustomAttribute.Type
-
Reference variable length array.
- tagAccess - Variable in class nxopen.mechatronics.OPCClientBuilder.TagAttribute
-
Access Right
- tagArray - Variable in class nxopen.uf.UFClear.AskObjAllButListData
-
- tagArray - Variable in class nxopen.uf.UFClear.AskObjListData
-
- tagArray - Variable in class nxopen.uf.UFParam.AskTagVlaData
-
- TagAttribute() - Constructor for class nxopen.mechatronics.MATLABClientBuilder.TagAttribute
-
- TagAttribute(String, MATLABClientBuilder.DataType, MATLABClientBuilder.DataPortType) - Constructor for class nxopen.mechatronics.MATLABClientBuilder.TagAttribute
-
Constructor for the TagAttribute object.
- TagAttribute() - Constructor for class nxopen.mechatronics.OPCClientBuilder.TagAttribute
-
- TagAttribute(String, OPCClientBuilder.TagDataType, OPCClientBuilder.TagAccess) - Constructor for class nxopen.mechatronics.OPCClientBuilder.TagAttribute
-
Constructor for the TagAttribute object.
- tagClass() - Method in interface nxopen.UFSession
-
- TAGENTIAL - Static variable in class nxopen.cam.RoughFinishTurningBuilder.ExtendModeTypes
-
Tagential
- tagForm() - Method in interface nxopen.mechatronics.RigidBodyBuilder
-
Returns the tagform.
- TagFormBuilder - Interface in nxopen.mechatronics
-
- TagFormCollection - Interface in nxopen.mechatronics
-
Represents a collection of TagForm.
- TagFormObject - Interface in nxopen.mechatronics
-
Represents the TagFormObject class.
- tagForms() - Method in interface nxopen.mechatronics.PhysicsManager
-
- TAGGED_OBJECT - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Tagged Object
- TAGGED_OBJECT - Static variable in class nxopen.PropertyContainer.PropertyType
-
Tagged Object
- TAGGED_OBJECT_MATRIX2D - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Tagged Object 2d-Matrix
- TAGGED_OBJECT_MATRIX2D - Static variable in class nxopen.PropertyContainer.PropertyType
-
Tagged Object 2d-Matrix.
- TAGGED_OBJECT_VECTOR - Static variable in class nxopen.blockstyler.PropertyList.PropertyType
-
Tagged Object Vector
- TAGGED_OBJECT_VECTOR - Static variable in class nxopen.PropertyContainer.PropertyType
-
Tagged Object Vector
- taggedFaces() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the faces with the defined attribute to create trim solid.
- TaggedObject - Interface in nxopen
-
An object which has a Tag
- TaggedObjectCollection - Interface in nxopen
-
A base class for all NXOpen tagged object collections
- TaggedObjectCollection.Iterator - Class in nxopen
-
An iterator class for tagged object collections
- TaggedObjectList - Interface in nxopen
-
Represents a list of objects.
- taggedObjectManager() - Method in interface nxopen.BaseSession
-
Returns the TaggedObjectManager for the NX session
- TaggedObjectManager - Interface in nxopen
-
Used for interoperability with Java.UF in order to obtain the TaggedObject
that corresponds to a given Tag.
- taggedObjectSelectionCallback(TaggedObject[], TaggedObject[], SelectionHandle) - Method in interface nxopen.Selection.TaggedObjectSelectionCallback
-
It is an optional callback which the user can provide to customize his selection of tagged objects
License requirements: None.
- TagInfo() - Constructor for class nxopen.mechatronics.MATLABClientBuilder.TagInfo
-
- TagInfo(String, SignalBuilder.ExternalSignalIOType, SignalBuilder.DataType) - Constructor for class nxopen.mechatronics.MATLABClientBuilder.TagInfo
-
Constructor for the TagInfo object.
- TagInfo() - Constructor for class nxopen.mechatronics.OPCClientBuilder.TagInfo
-
- TagInfo(String, SignalBuilder.ExternalSignalIOType, SignalBuilder.DataType) - Constructor for class nxopen.mechatronics.OPCClientBuilder.TagInfo
-
Constructor for the TagInfo object.
- TagInfo() - Constructor for class nxopen.mechatronics.OPCUAClientBuilder.TagInfo
-
- TagInfo(String, SignalBuilder.ExternalSignalIOType, SignalBuilder.DataType) - Constructor for class nxopen.mechatronics.OPCUAClientBuilder.TagInfo
-
Constructor for the TagInfo object.
- TagInfo() - Constructor for class nxopen.mechatronics.PlcSimAdvClientBuilder.TagInfo
-
- TagInfo(String, PlcSimAdvClientBuilder.AreaType, SignalBuilder.ExternalSignalIOType, SignalBuilder.DataType, boolean) - Constructor for class nxopen.mechatronics.PlcSimAdvClientBuilder.TagInfo
-
Constructor for the TagInfo object.
- TagInfo() - Constructor for class nxopen.mechatronics.ProfinetClientBuilder.TagInfo
-
- TagInfo(String, SignalBuilder.DataType, SignalBuilder.ExternalSignalIOType, String, boolean) - Constructor for class nxopen.mechatronics.ProfinetClientBuilder.TagInfo
-
Constructor for the TagInfo object.
- TagList() - Constructor for class nxopen.uf.UFRoute.TagList
-
- TagList(int, int, Tag[]) - Constructor for class nxopen.uf.UFRoute.TagList
-
- tagLocation() - Method in interface nxopen.diagramminglibraryauthor.Symbol2DBuilder
-
Returns the tag location
License requirements: None.
- tagMask() - Method in interface nxopen.pid.PreferencesGeneralBuilder
-
Returns the name of the file containing the tag mask configurations.
- tagname - Variable in class nxopen.mechatronics.OPCClientBuilder.AvailableItemsData
-
- tagName - Variable in class nxopen.mechatronics.OPCClientBuilder.TagAttribute
-
item Name
- tagPriority() - Method in interface nxopen.visualreporting.GroupLabel
-
- TAGS - Static variable in class nxopen.ame.ChildrenEvaluatorBuilder.FilterType
-
- TAGS - Static variable in class nxopen.ame.PlcSymbolsEvaluatorBuilder.FilterType
-
- tags - Variable in class nxopen.uf.UFRoute.AskMultiportTagsData
-
- TagTableBuilder - Interface in nxopen.mechatronics
-
- TagTableBuilder.ListParameterData - Class in nxopen.mechatronics
-
- TagTableBuilder.ParameterNamesAndTypesByIDData - Class in nxopen.mechatronics
-
- TagTableBuilder.RealParameterData - Class in nxopen.mechatronics
-
- TagTableCollection - Interface in nxopen.mechatronics
-
Represents a collection of TagTable.
- TagTableObject - Interface in nxopen.mechatronics
-
Represents the TagTableObject class.
- tagTables() - Method in interface nxopen.mechatronics.PhysicsManager
-
- tagtype - Variable in class nxopen.mechatronics.OPCClientBuilder.AvailableItemsData
-
- tagType - Variable in class nxopen.mechatronics.OPCClientBuilder.TagAttribute
-
Data Type
- tagValue() - Method in interface nxopen.TaggedObject
-
Equivalent to tag().value
- tail() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the weld tail
License requirements: None.
- TAIL - Static variable in class nxopen.annotations.LineWeldBuilder.TailType
-
- tail() - Method in interface nxopen.annotations.LineWeldData
-
Returns the tail for the reference line
License requirements: None.
- Tail - Class in nxopen.annotations
-
Specifies the weld tail for the reference line
- TailConnectorFeature - Interface in nxopen.linedesigner
-
Represents a typed connector feature feature
To create or edit an instance of this class, use
TypedConnectorFeatureBuilder
Created in NX9.0.0
- TAILS - Static variable in class nxopen.cae.ElementNormalsType
-
- TANGENCY - Static variable in class nxopen.features.AssociativityType
-
Tangency
- TANGENCY - Static variable in class nxopen.features.RPOBuilder.AssociativityType
-
Tangency
- TANGENCY - Static variable in class nxopen.geometricutilities.RadiusMethod
-
Control by tangency
- TANGENCY - Static variable in class nxopen.Sketch.AssocType
-
Create the dimension tangent to the geometric item
- TANGENCY - Static variable in class nxopen.uf.UFDrf.AssocType
-
- TANGENCY - Static variable in class nxopen.uf.UFSket.AssocType
-
- TANGENCY_CONTROLLED - Static variable in class nxopen.uf.UFModl.BlendRadiusTypes
-
- tangencyCollector() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the tangency collector of edges or/and curves for face blend
License requirements: None.
- TangencyGroupBuilder - Interface in nxopen.routing
-
Represents a
TangencyGroupBuilder
Assign tangency for segments connected with current editing spline.
- TANGENT - Static variable in class nxopen.annotations.AssociativityPointOption
-
Tangent point
- TANGENT - Static variable in class nxopen.ApparentChainingRuleType
-
Tangent Curves
- TANGENT - Static variable in class nxopen.DatumConstraint.Solution
-
- TANGENT - Static variable in class nxopen.DatumConstraint.Type
-
- TANGENT - Static variable in class nxopen.Direction.OnCurveOption
-
Creates direction tangent to curve.
- TANGENT - Static variable in class nxopen.features.AssociativeArcBuilder.EndOption
-
Tangent
- TANGENT - Static variable in class nxopen.features.AssociativeArcBuilder.MidOption
-
Tangent
- TANGENT - Static variable in class nxopen.features.AssociativeArcBuilder.StartOption
-
Tangent
- TANGENT - Static variable in class nxopen.features.AssociativeLineBuilder.EndOption
-
Tangent
- TANGENT - Static variable in class nxopen.features.AssociativeLineBuilder.StartOption
-
Tangent
- TANGENT - Static variable in class nxopen.features.BridgeCurveBuilder.CurveDirectionTypes
-
Deprecated.
bridge direction takes the tangent direction
of the base curve at the selected point
- TANGENT - Static variable in class nxopen.features.DatumAxisBuilder.AlternateSolution
-
Indicates the datum axis at tangent to curve
- TANGENT - Static variable in class nxopen.features.DatumAxisBuilder.ConstraintType
-
Tangent constraint
- TANGENT - Static variable in class nxopen.features.DatumAxisBuilder.CurveOrientations
-
Orientation at tangent to curve
- TANGENT - Static variable in class nxopen.features.DatumPlaneBuilder.AlternateSolution
-
Indicates the datum plane as tangent to curve
- TANGENT - Static variable in class nxopen.features.DatumPlaneBuilder.ConstraintType
-
Tangent constraint
- TANGENT - Static variable in class nxopen.features.DraftBuilder.Type
-
Tangent Draft type
- TANGENT - Static variable in class nxopen.features.EdgeBlendBuilder.FaceContinuity
-
- TANGENT - Static variable in class nxopen.features.ExtendSheetBuilder.SideEdgeShape
-
- TANGENT - Static variable in class nxopen.features.GeometricConstraintData.AutoConstraintType
-
Tangent(G1)
- TANGENT - Static variable in class nxopen.features.MeshSurfaceBuilder.ConstraintType
-
Tangent
- TANGENT - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperType
-
Tangent
- Tangent - Interface in nxopen.features
-
Represents a tangent feature
To create or edit an instance of this class, use
TangentBuilder
Created in NX6.0.0
- TANGENT - Static variable in class nxopen.features.VarOffsetFaceBuilder.Continuity
-
- TANGENT - Static variable in class nxopen.FollowFilletRuleType
-
Tangent Curves
- tangent - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
tangent of closest point in Root Part Coordinates
- tangent - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Tangent Vector in Root Part coordinates
- TANGENT - Static variable in class nxopen.geometricutilities.BridgeCurveConnectivity.CurveDirectionOptions
-
Tangent to section
- TANGENT - Static variable in class nxopen.geometricutilities.MatchSurfaceBuilder.MatchConstaint
-
- tangent() - Method in interface nxopen.InferredConstraintsBuilder
-
Returns the tangent infer-constraint setting.
- TANGENT - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Tangent to path, = FRENET_TANGENT
- TANGENT - Static variable in class nxopen.PlaneTypes.MethodType
-
Tangent method
- TANGENT - Static variable in class nxopen.preferences.RoutingPath.ChainMethod
-
Use curve with closest tangent when searching
- tangent - Variable in class nxopen.routing.SplinePathBuilder.AssignTangentExtensionForPointAtIndexData
-
Extension direction.
- TANGENT - Static variable in class nxopen.Sketch.ConstraintType
-
- tangent() - Method in interface nxopen.SketchAutoConstrainBuilder
-
Returns the tangent
License requirements: None.
- TANGENT - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- TANGENT - Static variable in class nxopen.SketchG1Constraint.SlopeType
-
The slope geometry is tangent to spline
- TANGENT - Static variable in class nxopen.uf.UFCurve.ConstraintType
-
- tangent - Variable in class nxopen.uf.UFEval.EvaluateUnitVectorsData
-
- tangent - Variable in class nxopen.uf.UFModlGeneral.AskCurvePropsData
-
- tangent - Variable in class nxopen.uf.UFRoute.AskSegmentEndPropsData
-
- TANGENT - Static variable in class nxopen.uf.UFSket.ConType
-
- TANGENT - Static variable in class nxopen.weld.WeldGrooveExtension
-
Extend selected edges to form an intersection.
- tangent2dComponentEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add tangent 2d component relation recognition for the last curves added to curve collector
License requirements: None.
- TANGENT_ALONG_CENTERLINE - Static variable in class nxopen.uf.UFModl.BeadPlaneNormal
-
- TANGENT_ANGLE_PLANE - Static variable in class nxopen.PlaneTypes.MethodType
-
Tangent to a cyl face at an angle to a planar face
- TANGENT_AREA - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PositionMethods
-
Tangent Area
- TANGENT_BASED - Static variable in class nxopen.facet.BridgeFacetBodyBuilder.SmoothTypes
-
Insert new facets with tangent smoothness
- TANGENT_BASED - Static variable in class nxopen.facet.FillHoleBuilder.SmoothTypes
-
Smooth fill, boundary is based on facet body tangent.
- TANGENT_CLEARANCE - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
tangent from/to clearance
- TANGENT_CON - Static variable in class nxopen.uf.UFModl.DfoConstraintType
-
- TANGENT_CONIC - Static variable in class nxopen.uf.UFCurve.BridgeMethod
-
- TANGENT_CONTINUOUS - Static variable in class nxopen.features.StyledCornerBuilder.TrimCurveTypes
-
Tangent continuous type
- TANGENT_CURVE1 - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType
-
Tangent curve 1
- TANGENT_CURVE2 - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType
-
Tangent curve 2
- TANGENT_FACE - Static variable in class nxopen.PlaneTypes.MethodType
-
Tangent to face method
- TANGENT_FACES - Static variable in class nxopen.weld.WeldBeadBuilder.FaceInferMethodType
-
use faces tangent to selected faces to create the bead path curve
- TANGENT_FROM_FACES - Static variable in class nxopen.features.GuidedExtensionBuilderEx.Types
-
Extend tangentially from faces
- TANGENT_INFER - Static variable in class nxopen.PlaneTypes.MethodType
-
Inferred Tangent method
- TANGENT_LINEAR - Static variable in class nxopen.PlaneTypes.MethodType
-
Tangent to face through linear method
- TANGENT_MAGNITUDE - Static variable in class nxopen.features.BridgeCurveBuilderEx.ShapeControlMethods
-
Shape using tangent magnitude at ends
- TANGENT_MAGNITUDE - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendShapeControlType
-
Tangent magnitude control
- TANGENT_MAGNITUDE - Static variable in class nxopen.features.StyledCornerBuilder.ShapeControlMethodsTypes
-
Tangent and magnitude
- TANGENT_PAR_PLANE - Static variable in class nxopen.PlaneTypes.MethodType
-
Tangent to face parallel to plane method
- TANGENT_PERP_PLANE - Static variable in class nxopen.PlaneTypes.MethodType
-
Tangent to face perpendicular to plane method
- TANGENT_POINT - Static variable in class nxopen.PlaneTypes.MethodType
-
Tangent to face through point method
- TANGENT_POINT_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocPointType
-
- TANGENT_RADIUS - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Tangent Radius mode
- TANGENT_TANGENT - Static variable in class nxopen.features.SectionSurfaceBuilderEx.LinearType
-
Tangent Tangent mode
- TANGENT_TANGENT_RADIUS - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Tangent Tangent Radius mode
- TANGENT_TO_FACE - Static variable in class nxopen.features.DraftBodyBuilder.MatchingType
-
Match type Tangent to face
- TANGENT_TO_STRING - Static variable in class nxopen.SketchConstraintBuilder.Constraint
-
- TANGENT_TO_STRING - Static variable in class nxopen.uf.UFSket.ConType
-
- TANGENT_TWO_FACES - Static variable in class nxopen.PlaneTypes.MethodType
-
Tangent to two faces method
- TANGENT_TYPE - Static variable in class nxopen.tooling.ScrapDesignBuilder.OvercutType
-
Creates tangent type of overcut
- tangentAngle() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the tangent angle used to find faces tangent to the seed face specified.
- TangentBuilder - Interface in nxopen.features
-
- tangentColor() - Method in interface nxopen.preferences.SessionModeling
-
Returns the tangent color
License requirements: None.
- TangentContinuousEdgeMethod - Interface in nxopen.cae
-
Represents the output from the circular edge smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- tangentCurve1() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the first tangent curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- tangentCurve2() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the second tangent curve
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- tangentDirection() - Method in interface nxopen.features.GeometricConstraintData
-
Returns the tangent direction.
- tangentDirectionVector() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the tangent direction vector
License requirements: None.
- tangentEdgeAngle() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the tangent edge angle of forming region.
- tangentEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add tangent relation recognition for the last curves added to curve collector
License requirements: None.
- tangentEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether tangent relation recognition is enabled
License requirements: None.
- TangentFaceMethod - Interface in nxopen.cae
-
Represents the output from the tangent face smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.
- tangentFaceThreshold() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
Returns the value (in degrees) to determine if adjacent surfaces are tangent.
- tangentGeometry() - Method in interface nxopen.SketchG1Constraint
-
Returns the geometry supplying slope for G1 constraint.
- TANGENTIAL - Static variable in class nxopen.annotations.MaterialConditionModifier
-
Specifies tangent plane modifier
- TANGENTIAL - Static variable in class nxopen.cam.RoughFinishTurningBuilder.ExtendModeTypes
-
Tangential
- TANGENTIAL - Static variable in class nxopen.features.AOCSBuilder.OffsetType
-
offset_type_tangential
- TANGENTIAL - Static variable in class nxopen.features.ExtensionBuilder.Extension
-
Tangential extension
- TANGENTIAL - Static variable in class nxopen.tooling.MWDesignGuideLinesBuilder.DirectionType
-
Tangential
- TANGENTIAL - Static variable in class nxopen.uf.UFGdt.MaterialModifier
-
- TANGENTIAL_LINE - Static variable in class nxopen.cam.BoundaryTurnMemberFineFinishCorner.ValueType
-
- tangentialExtension() - Method in interface nxopen.cam.TurnEngageRetractBuilder
-
Returns the Tangential Extension
License requirements: None.
- tangentInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.CaeCurve
-
tangent of closest point in Work Part Coordinates
- tangentInWcs - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Tangent Vector in Work Part coordinates
- tangentLines - Variable in class nxopen.uf.UFSmd.FpPrefs
-
- tangentMagnitude() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the tangent magnitude
License requirements: None.
- tangentMagnitude() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the tangent magnitude
License requirements: None.
- tangentMagnitude() - Method in interface nxopen.features.GeometricConstraintData
-
Returns the tangent magnitude.
- tangentMagnitude1() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the tangent magnitude 1
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- tangentMagnitude2() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the tangent magnitude 2
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- TangentMagnitudeBuilder - Interface in nxopen.geometricutilities
-
This class provides ability to specify the start and end
tangent magnitude values.
- tangentModulus(double, double, double, double) - Method in interface nxopen.cae.aerostructures.author.ABB
-
Computes the tangent modulus from material properties and stress.
- tangentModulus() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the tangent modulus
License requirements: None.
- TangentModulusData() - Constructor for class nxopen.cae.aerostructures.author.ABB.TangentModulusData
-
- tangentPlane() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the tangent plane toggle
License requirements: None.
- tangentPlaneType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the tangent plane enum
License requirements: None.
- TANGENTPOINT_TANGENT - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Tangentpoint Tangent mode
- tangentSketchGroupEnabled() - Method in interface nxopen.features.CurveFinderBuilder
-
Returns a value that indicates whether add tangent relation recognition for the last curves added to curve collector
License requirements: None.
- tangentSurface() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the tangency object for face blend.
- tangentTolerance() - Method in interface nxopen.features.AestheticFaceBlendBuilder
-
Returns the tangent tolerance
License requirements: None.
- tangentTolerance() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the tangent tolerance
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- tangentTolerance() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- tangentTolerance() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the tangent tolerance
License requirements: None.
- tangentTolerance() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the tangent tolerance
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- tangentTolerance() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the tangent tolerance
License requirements: nx_freeform_1 ("basic freeform modeling") OR features_modeling ("FEATURES MODELING")
.
- tangentTolerance() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the tangent tolerance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- tangentTolerance() - Method in interface nxopen.features.ThroughCurveMeshBuilder
-
Returns the tangent tolerance.
- tangentTolerance() - Method in interface nxopen.features.ThroughCurvesBuilder
-
Returns the tangent tolerance.
- tangentTolerance() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the tangent tolerance between two faces connection
License requirements: None.
- tangle() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the theta angle for translation in a cylindrical/spherical coordinate system
License requirements: None.
- tangle() - Method in interface nxopen.cae.NodeCreateBuilder
-
Returns the t angle
License requirements: None.
- tangle() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the t angle
License requirements: None.
- TANK_IN - Static variable in class nxopen.uf.UFPath.TankType
-
- TANK_OUT - Static variable in class nxopen.uf.UFPath.TankType
-
- TANK_TYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.TankType
-
- TANTO - Static variable in class nxopen.cam.DmSurfBuilder.ToolPositionType
-
Tanto
- TANTO - Static variable in class nxopen.cam.DmToolPosition.ToolPositionOption
-
Tanto position
- TANTO - Static variable in class nxopen.cam.DPMItpBuilder.ToolPositionOption
-
Tanto position
- TANTO - Static variable in class nxopen.cam.WedmCutParameters.WirePositionTypes
-
drive tanto
- TAP - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes
-
Cycle: Tap
- TAP_DRILL_DIAMETER - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- TAP_FLOAT - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.CycleTypes
-
Cycle: Tap, Float
- tapDrillDiameter() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the tap drill diameter - this is applicable for threaded hole
License requirements: None.
- tapDrillDiameter() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the tap drill diameter
License requirements: None.
- tapDrillSize() - Method in interface nxopen.cam.ThreadedHoleSet
-
Returns the Tap Drill Size
License requirements: None.
- tapDrillSizeBuilder() - Method in interface nxopen.cam.ThreadedHoleSet
-
Returns the Tap Drill Size builder
License requirements: None.
- TAPE - Static variable in class nxopen.uf.UFConstants
-
- TAPE_NA_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- TAPE_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- TAPE_TYPE - Static variable in class nxopen.uf.UFWeld.Types
-
- TAPE_WELD - Static variable in class nxopen.uf.UFConstants
-
- TAPE_WELD_NON_ASSOCIATIVE - Static variable in class nxopen.uf.UFConstants
-
- TAPER - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- taper - Variable in class nxopen.uf.UFCutter.HolderSection
-
- TAPER_ANGLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- TAPER_ANGLE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.CavityTypeItems
-
the taper angle type
- TAPER_ANGLE - Static variable in class nxopen.tooling.PiercingInsertBuilder.NormalCavityType
-
the taper angle type
- TAPER_ANGLE - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.NormalCavityType
-
the taper angle type
- TAPER_FROM_BEND - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.StartType
-
Taper from Bend
- TAPER_FROM_WEB - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.StartType
-
Taper from Web
- taperAllInstances - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
-
- taperAllInstances - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
-
- taperAngle - Variable in class nxopen.cam.HolderSectionBuilder.AllParametersData
-
the taper angle
- taperAngle - Variable in class nxopen.cam.HolderSectionBuilder.Data
-
the taper angle
- taperAngle() - Method in interface nxopen.cam.WireGuide
-
Returns the taper angle
License requirements: None.
- taperAngle - Variable in class nxopen.uf.UFModl.AskExtrusionData
-
- taperAngle - Variable in class nxopen.uf.UFModl.AskSweepParmsData
-
- taperAngle - Variable in class nxopen.uf.UFModl.SmpunchData
-
- taperAngle - Variable in class nxopen.uf.UFModlFeatures.AskBossParmsData
-
- taperAngle - Variable in class nxopen.uf.UFModlFeatures.AskCylPocketParmsData
-
- taperAngle - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParms1Data
-
- taperAngle - Variable in class nxopen.uf.UFModlFeatures.AskRectPadParmsData
-
- taperAngle - Variable in class nxopen.uf.UFModlFeatures.AskRectPocketParmsData
-
- taperAngle - Variable in class nxopen.uf.UFModlFeatures.AskTaperHoleParmsData
-
- taperAngleType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the taperAngle setting
License requirements: None.
- taperAngleValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the taperAngle value
License requirements: None.
- taperAtEnd() - Method in interface nxopen.weld.GrooveBuilder
-
- taperAtStart() - Method in interface nxopen.weld.GrooveBuilder
-
- taperBead() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the indication if the bead should allow taper to be added to the side walls.
- taperDistance() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the taper distance of the bead.
- taperDistance1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the taper distance for side 1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- taperDistance2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the taper distance for side 2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- TAPERED - Static variable in class nxopen.features.HolePackageBuilder.HoleForms
-
Tapered hole form
- TAPERED - Static variable in class nxopen.features.sheetmetal.BeadBuilder.EndTypeOptions
-
- tapered - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- TAPERED_HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- TAPERED_ONE_SIDE - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.DriverGraphOption
-
Use the rectangular definition with taper on one side.
- TAPERED_PIN_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- taperedShankDiameterBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the tapered shank diameter
License requirements: None.
- taperedShankLengthBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the tapered shank length
License requirements: None.
- taperedShankTaperLengthBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the tapered shank taper length
License requirements: None.
- taperEnd() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the taper end.
- taperLength() - Method in interface nxopen.cam.LaserTool
-
Returns the Nozzle Taper Length
License requirements: None.
- taperLine() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the selected taper line.
- taperLocationAY() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the taper location along the Y axis that is used for the rectangular driver definition with taper on one side (at A point).
- taperLocationBX() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the taper location along the X axis that is used for the rectangular driver definition with taper on one side (at B point).
- taperLocationXAxis() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the taper location that is used for the rectangular driver definition with taper in the X direction.
- taperLocationYAxis() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the taper location that is used for the rectangular driver definition with taper in the Y direction.
- taperMethod() - Method in interface nxopen.weld.GrooveBuilder
-
- taperMethod() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the taper method
License requirements: ugweld ("UG WELD")
.
- taperPoint() - Method in interface nxopen.die.DrawBeadTaperBuilder
-
Returns the point used for defining the radius value of the spherical taper.
- taperRadius() - Method in interface nxopen.die.DrawBeadTaperBuilder
-
Returns the expression containing the radius value for a spherical taper.
- taperSides() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the taper sides
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- taperStart() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the taper start.
- taperType() - Method in interface nxopen.die.DrawBeadTaperBuilder
-
Returns the method to apply for defining the taper.
- taperType() - Method in interface nxopen.EndCutBlockBuilder
-
Returns the taperType
License requirements: None.
- taperType - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdges1Data
-
- taperWashoutHeight() - Method in interface nxopen.die.DrawBeadTaperBuilder
-
Returns the expression containing the height value for a washout taper.
- taperWashoutLength() - Method in interface nxopen.die.DrawBeadTaperBuilder
-
Returns the expression containing the length value for a washout taper.
- tappedDia - Variable in class nxopen.uf.UFModl.SymbThreadData
-
- tapSurface() - Method in interface nxopen.cae.BoltBuilder
-
Returns the selected tap surface(s)
License requirements: None.
- TARGET - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentCamType
-
Set the origin type to target
- target() - Method in interface nxopen.cae.MeshPointProjectBuilder
-
Returns the target
License requirements: None.
- TARGET - Static variable in class nxopen.cae.optimization.Goal
-
Target value
- target() - Method in interface nxopen.cae.SimLoadRecipeMapEntry
-
- target() - Method in interface nxopen.cam.RobotCartesianMove
-
Returns the location
License requirements: cam_base ("CAM BASE")
.
- target() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the target solid the relief will be united with
License requirements: None.
- target() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the target solid the clamp slots will be united with
License requirements: None.
- target() - Method in interface nxopen.die.ClearanceBuilder
-
Returns the target solid the clearance will be subtracted from.
- target() - Method in interface nxopen.die.FillAreaBuilder
-
Returns the target solid the fill area will be united with or subtracted from.
- target() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the target solid the finger clearance notch will be subtracted from.
- target() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the target solid the handling core will be subtracted from.
- target() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the target solid the heelpost will be united with
License requirements: None.
- target() - Method in interface nxopen.die.KeywayBuilder
-
Returns the target solid the keyway will be united with
License requirements: None.
- target() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the target solid to add or subtract material too.
- target() - Method in interface nxopen.display.RasterImageBuilder
-
Returns the plane the raster image is placed onto
License requirements: None.
- target() - Method in interface nxopen.features.BlockFeatureBuilder
-
Returns the target body for the boolean operation (if any) for the block
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- target() - Method in interface nxopen.features.BooleanBuilder
-
Returns the target body
License requirements: None.
- TARGET - Static variable in class nxopen.features.EmbossLimit.EndcapSourceOption
-
Indicates the geometries are some of the faces on the Target Body.
- TARGET - Static variable in class nxopen.features.EmbossProjection.ProjectionOption
-
Indicates the geometry is target.
- target() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the target objects.
- target() - Method in interface nxopen.features.IBoolean
-
- target() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the target body to offset
This defines a sheet body to offset emboss.
- target() - Method in interface nxopen.features.PatchBuilder
-
Returns the target.
- target() - Method in interface nxopen.features.RPODimension
-
Returns the targe of the dimension.
- TARGET - Static variable in class nxopen.features.shipdesign.ProfileTransitionBuilder.FeatureModeType
-
Create transition on the target body.
- target() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the target FeatureInfo for the divide operation.
- target() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Returns the target
License requirements: None.
- TARGET - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.ReportingPerTypes
-
Per Target Object
- target() - Method in interface nxopen.geometricutilities.Extend
-
- target() - Method in interface nxopen.layout2d.ReparentComponentBuilder
-
Returns the target of 2D Components reparent operation
License requirements: None.
- TARGET - Static variable in class nxopen.mechatronics.AlignBodyBuilder.RoleType
-
Target
- TARGET - Static variable in class nxopen.optimization.OptimizationBuilder.OptimizationTargetType
-
Target is specified value of design objective
- target() - Method in interface nxopen.PositioningDimension
-
Returns
the target entity.
- TARGET - Static variable in class nxopen.routing.AssignTangencyBuilder.TangencySide
-
Assign tangency at target ControlPoint.
- TARGET_BODY - Static variable in class nxopen.preferences.SessionModeling.BooleanFacePropertiesInheritance
-
Indicates that display of boolean face properties inherits from target body
- TARGET_BODY - Static variable in class nxopen.uf.UFModl.BooleanBody
-
- TARGET_PART - Static variable in class nxopen.tooling.ClearanceManagementBuilder.Selection
-
- TARGET_SPECIFIC - Static variable in class nxopen.ame.AmeJunctionRepresentationStyleType
-
- targetAngle - Variable in class nxopen.uf.UFModl.BendOperationData
-
- targetAssociativity() - Method in interface nxopen.features.RPODimension
-
Returns the target associativity.
- targetBinderType() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the type of binder target.
- targetBodies() - Method in interface nxopen.features.SewBuilder
-
Returns the target sheet bodies
License requirements: None.
- targetBodies() - Method in interface nxopen.features.TrimSheetBuilder
-
Returns the target bodies
License requirements: None.
- targetBodies() - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
Returns the target bodies which collects the bodies to be trimmed or untrimmed.
- targetBody() - Method in interface nxopen.facet.FillHoleBuilder
-
Returns the facet body we will be filling.
- targetBody() - Method in interface nxopen.facet.SewFacetBodyBuilder
-
Returns the target body to be sewed
License requirements: None.
- targetBody() - Method in interface nxopen.features.AssemblyCutBuilder
-
Returns the target body
License requirements: None.
- targetBody() - Method in interface nxopen.features.CopyFaceBuilder
-
Returns the target body.
- targetBody() - Method in interface nxopen.features.CutFaceBuilder
-
Returns the target body.
- targetBody() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the target body
License requirements: None.
- targetBody() - Method in interface nxopen.features.PasteFaceBuilder
-
Returns the target body.
- targetBody() - Method in interface nxopen.features.RibBuilder
-
Returns the target body
License requirements: None.
- targetBody() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the target body on which the normal cutout is created.
- targetBody() - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Returns the target body on which the secondary tab is created.
- targetBody() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the target body for the divide operation.
- targetBody() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
Returns the profile or plate solid bodies that are being split.
- targetBody() - Method in interface nxopen.features.SplitBodyBuilder
-
Returns the target body to split.
- targetBody - Variable in class nxopen.geometricutilities.BooleanOperation.BooleanOperationAndBodyData
-
target body
- targetBody() - Method in interface nxopen.tooling.DieEngStampingOutputBuilder
-
Returns the select target body
License requirements: None.
- targetBody() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the target body required for boolean operation
License requirements: None.
- targetBody() - Method in interface nxopen.tooling.TrimRegionBuilder
-
Returns the selection of target to create trim region, body type only.
- targetBody - Variable in class nxopen.uf.UFModeling.AskPatchBodyParmsData
-
- targetBodyCollector() - Method in interface nxopen.features.SplitBodyBuilder
-
Returns the collector of target bodies to split.
- targetBodyCollector() - Method in interface nxopen.features.TrimBody2Builder
-
Returns the collector of target bodies to trim.
- targetBodyForSubtract() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the target body for subtract
License requirements: None.
- targetBodyTags - Variable in class nxopen.uf.UFAssem.AskBodiesOfAssemblyCutData
-
- targetBoundaryEdges() - Method in interface nxopen.features.ExtendSheetBuilder
-
Returns the input edges to extend
License requirements: None.
- targetBuiltUps() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the target built-up solid bodies for split.
- targetCageObjects() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Returns the target cage objects to infer a plane or axis from
License requirements: None.
- targetCenter() - Method in interface nxopen.cae.connections.INodalTargetCenter
-
Returns the target center
License requirements: None.
- targetChannel() - Method in interface nxopen.tooling.ChannelAdjustBuilder
-
Returns the cooling channel to be adjusted.
- targetClass() - Method in interface nxopen.cam.CutterExport
-
Returns the target class for exporting
License requirements: None.
- targetCollector() - Method in interface nxopen.features.TrimExtendBuilder
-
Returns the target collector tool selection to specify the target for a trim or extend operation
License requirements: None.
- targetComponents() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the target components that are cut
License requirements: None.
- targetComponents() - Method in interface nxopen.features.PaintParametersBuilder
-
Returns the target components that contain the target features.
- targetComponents() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the target components which contains the target ejector pins to be trimmed.
- targetComponentSelection() - Method in interface nxopen.features.PaintParametersBuilder
-
Returns the target component selection.
- targetConnector() - Method in interface nxopen.linedesigner.ConnectionCreatorBuilder
-
Returns the target connector used in connection
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- targetCorrectionMode() - Method in interface nxopen.cae.SignalProcessingPlotData
-
Returns the requested target correction mode for the curve
License requirements: None.
- targetCsysPt - Variable in class nxopen.uf.UFModl.SolidPunchData
-
- targetCurve() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target curve
License requirements: None.
- targetCurveOffset() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target curve offset
License requirements: None.
- targetCurveOffsetLaw() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target curve offset law
License requirements: None.
- targetCurveOffsetType() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target curve offset type
License requirements: None.
- targetCurveOrientation() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the orientation of the target curve to the limit curves.
- targetCurves() - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Returns the curve
License requirements: None.
- targetCurvesList() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target curves list
License requirements: solid_modeling ("SOLIDS MODELING")
.
- targetCurveType() - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Returns the curve type
License requirements: None.
- TargetCylArea() - Constructor for class nxopen.uf.UFGdt.TargetCylArea
-
- TargetCylArea(Tag, int, Tag, Tag, double[], double[]) - Constructor for class nxopen.uf.UFGdt.TargetCylArea
-
- targetData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- TargetDependencyType - Class in nxopen.cae.connections
-
Nodal target dependency type
- TargetDiaArea() - Constructor for class nxopen.uf.UFGdt.TargetDiaArea
-
- TargetDiaArea(Tag, int, Tag, UFGdt.ToleranceValue, UFGdt.ToleranceValue, boolean, Tag, double[]) - Constructor for class nxopen.uf.UFGdt.TargetDiaArea
-
- targetDieType() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the type of die target.
- targetDirectory() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the target directory to save cloned kinematic model.
- targetDirectory() - Method in interface nxopen.tooling.SetPressModelBuilder
-
Returns the target directory to store cloned press model
License requirements: None.
- targetDistance() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the target distance to the eye behind the vehicle, which is defined in the standard.
- targetDistanceFar() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the far target distance to the eye behind the vehicle, which is defined in the standard.
- targetDynamicPlane() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Returns the target dynamic plane
License requirements: None.
- targetEdge() - Method in interface nxopen.cae.ContactMeshBuilder
-
Returns the target edge
License requirements: None.
- targetEdge() - Method in interface nxopen.cae.DependentMeshListItemBuilder
-
Returns the target edge
License requirements: nx_masterfem ("Finite Element Modeling")
.
- targetEdge() - Method in interface nxopen.cae.ManualSweepBetweenListItemSelection
-
Returns the target edge
License requirements: nx_masterfem ("Finite Element Modeling")
.
- targetEdge() - Method in interface nxopen.cae.MeshManualSweepBetweenListItemSelection
-
Returns the target edge
License requirements: nx_masterfem ("Finite Element Modeling")
.
- targetEdge - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- targetEdgeEndLimit - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- targetEdgeEndPoint() - Method in interface nxopen.cae.ContactMeshBuilder
-
Returns the end point of contact on target edge
License requirements: None.
- targetEdgeMeshDir - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- targetEdgeNodeAlignMethod - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- targetEdgeSelection() - Method in interface nxopen.cae.EdgeSticherBuilder
-
- targetEdgeStartLimit - Variable in class nxopen.uf.UFSf.ContactMeshData
-
- targetEdgeStartPoint() - Method in interface nxopen.cae.ContactMeshBuilder
-
Returns the start point of contact on target edge
License requirements: None.
- targetEffectivity() - Method in interface nxopen.assemblies.SubsetBuilder
-
- targetEffectivityTable() - Method in interface nxopen.assemblies.SubsetBuilder
-
- targetendplanetag - Variable in class nxopen.die.TrimTaskBuilder.CheckAndMovePlanesData
-
End plane in target operation.
- targetEntityTags - Variable in class nxopen.uf.UFModl.MatchedgeData
-
- targetExtendDistance() - Method in interface nxopen.features.TrimExtendBuilder
-
Returns the target extend distance
License requirements: None.
- targetFace() - Method in interface nxopen.cae.DependentMeshBuilder
-
Returns the target face
License requirements: nx_masterfem ("Finite Element Modeling")
.
- targetFace() - Method in interface nxopen.cae.EdgeFaceImprintBuilder
-
Returns the target face selection for projection imprint
License requirements: None.
- targetFace() - Method in interface nxopen.cae.ImprintBuilder
-
Returns the target face selection for projection imprint
License requirements: None.
- targetFace() - Method in interface nxopen.cae.ManualSweepBetweenSelection
-
- targetFace() - Method in interface nxopen.cae.Mesh3dHexBuilder
-
Returns the target face
License requirements: nx_masterfem ("Finite Element Modeling")
.
- targetFace() - Method in interface nxopen.cae.MMCCreateBuilder
-
- targetFace() - Method in interface nxopen.features.EmbossTarget
-
Returns the target faces on which the emboss places.
- targetFace() - Method in interface nxopen.features.PoleSmoothingBuilder
-
Returns the target face
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- targetFace() - Method in interface nxopen.features.sheetmetal.BendBuilder
-
Returns the target face on which bend feature applies.
- targetFace() - Method in interface nxopen.features.sheetmetal.JogBuilder
-
Returns the target face on which jog feature applies.
- targetFace() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the target face
License requirements: None.
- targetFace() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the target face
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- targetFace() - Method in interface nxopen.features.VarOffsetFaceBuilder
-
Returns the target face
License requirements: None.
- targetFace() - Method in interface nxopen.SurfaceUVDirectionBuilder
-
Returns the target face; feature faces can not be operated on.
- targetFace() - Method in interface nxopen.tooling.ReusableObjectPasteBuilder
-
Returns the target face required for solid punch
License requirements: None.
- targetFace - Variable in class nxopen.uf.UFModl.SolidPunchData
-
- targetFace() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the target face of a T-joint weld.
- targetFace() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the target face of a fillet weld.
- targetFaceEid - Variable in class nxopen.uf.UFModeling.AskLinkFacesData
-
- targetFaceList() - Method in interface nxopen.cae.Mesh3dHexBuilder
-
Returns the target face list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- targetFaces() - Method in interface nxopen.features.SewBuilder
-
Returns the target solid faces
License requirements: None.
- targetfaces - Variable in class nxopen.features.shipdesign.MarkingLineDesignBuilder.MarkingLineInformationData
-
(OF) - a set of molding faces that generated the marking line
- targetFaces - Variable in class nxopen.uf.UFModeling.AskSewSolidBodyData
-
- targetFaces - Variable in class nxopen.uf.UFModlFeatures.AskReplaceFaceData
-
- targetFaces - Variable in class nxopen.uf.UFModlFeatures.AskResizeFaceData
-
- targetFacesCount - Variable in class nxopen.uf.UFModeling.AskSewSolidBodyData
-
- targetFaceSelection() - Method in interface nxopen.cae.AutomaticSweepBetweenSelection
-
- targetFaceSelection() - Method in interface nxopen.cae.EdgeSticherBuilder
-
- targetFacetBody() - Method in interface nxopen.facet.FillHoleBuilder
-
- targetFeatures() - Method in interface nxopen.features.PaintParametersBuilder
-
Returns the target features
License requirements: None.
- targetFileName() - Method in interface nxopen.cae.DurabilityStrainGageAnalyzerBuilder
-
Returns the targetFileName.
- targetGeom - Variable in class nxopen.uf.UFSf.AskMeshMatingConditionData
-
- targetGroup() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the target group referenced by this connection
License requirements: nx_masterfem ("Finite Element Modeling")
.
- targetGroupFilterType() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the filter type for target group selection
License requirements: None.
- targetGroupReferenceState() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the state defining whether the target of this connection is defined with a group
License requirements: nx_masterfem ("Finite Element Modeling")
.
- targetHole() - Method in interface nxopen.facet.FillHoleBuilder
-
Returns the hole curves using Fill Hole, User Defined.
- targetIndex() - Method in interface nxopen.annotations.IDatumTarget
-
Returns the datum target index.
- targetIndex - Variable in class nxopen.uf.UFGdt.DatumTargetLine
-
- targetIndex - Variable in class nxopen.uf.UFGdt.DatumTargetPoint
-
- targetIndex - Variable in class nxopen.uf.UFGdt.TargetCylArea
-
- targetIndex - Variable in class nxopen.uf.UFGdt.TargetDiaArea
-
- targetIndex - Variable in class nxopen.uf.UFGdt.TargetRectArea
-
- targetIndex - Variable in class nxopen.uf.UFGdt.TargetUdefArea
-
- targetLayer() - Method in interface nxopen.motion.PackagingTraceBuilder
-
Returns the
PackagingTrace
target layer
License requirements: mechanisms ("MECHANISMS")
Created in NX4.0.0
- targetLayer - Variable in class nxopen.uf.UFMotion.Trace
-
- targetLineEnd() - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Returns the line end
License requirements: None.
- targetLineStart() - Method in interface nxopen.cae.MorphRevolvedMeshBuilder
-
Returns the line start
License requirements: None.
- targetMaterialSide() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the target material side direction
License requirements: None.
- targetMatrix() - Method in interface nxopen.display.CameraBuilder
-
Returns the target point rotation matrix
License requirements: None.
- targetMinimumElementEdgeLength - Variable in class nxopen.uf.UFSf.Ugs2dMeshParms
-
- targetNode() - Method in interface nxopen.cae.MoveNodeBuilder
-
Returns the target node
License requirements: None.
- targetNodes() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the target Node(s)
License requirements: None.
- TargetNonPlanarData() - Constructor for class nxopen.uf.UFGdt.TargetNonPlanarData
-
- TargetNonPlanarData(boolean, double[], int, double[]) - Constructor for class nxopen.uf.UFGdt.TargetNonPlanarData
-
- targetObj - Variable in class nxopen.uf.UFModl.RefitFaceTargetData
-
- targetObject() - Method in interface nxopen.ame.BulkConnectionBuilder
-
Returns the target object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- targetObject() - Method in interface nxopen.ame.EvaluatorCopyToBuilder
-
Returns the selected target object to copy evaluator to
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- targetObject() - Method in interface nxopen.features.FitSurfaceBuilder
-
- targetObject() - Method in interface nxopen.features.subdivision.SubdivisionSetContinuityBuilder
-
Returns the target object.
- targetObject() - Method in interface nxopen.features.subdivision.SubdivisionSetWeightBuilder
-
Returns the target object.
- targetObject() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
Returns the target object to be reflected on the faces and/or planes
the target object
License requirements: None.
- targetObjective() - Method in interface nxopen.cae.optimization.TBSObjectives
-
Returns the target objective type
License requirements: None.
- targetObjects() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the target objects to which the face is fitted to can be a facet body, a point set or a point group
License requirements: None.
- targetObjects() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the target object that the edge is matching to
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- targetObjects() - Method in interface nxopen.features.PaintParametersBuilder
-
Returns the target paintable objects
License requirements: None.
- targetObjects() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the plates that are to have cutouts placed into them for each profile.
- targetObjects() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder
-
Returns the target object
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- targetObjectSelection() - Method in interface nxopen.ame.ObjectConnectionBuilder
-
Returns the selection of target objects
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- targetOption() - Method in interface nxopen.cae.ConvertToConvergentBodyBuilder
-
Returns the target option which indicates where the resulting convergent body will be created
License requirements: None.
- targetOption() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the target option
License requirements: None.
- targetPart() - Method in interface nxopen.annotations.PmiWaveLinkBuilder
-
Returns the target part for the WAVE link
License requirements: solid_modeling ("SOLIDS MODELING")
.
- targetPart() - Method in interface nxopen.features.shipdesign.MirrorShipStructureBuilder
-
Returns the target parts or components where the selected features will be mirror copied into.
- targetPartitionList() - Method in interface nxopen.assemblies.SubsetBuilder
-
Returns the default target
Partition
s for design elements created within the subset.
- targetPathFolderBrowser() - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
Returns the generation target folder path
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- targetPlane() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Returns the target plane
License requirements: None.
- TargetPoint - Interface in nxopen.annotations
-
Represents a target point
To create or edit an instance of this class, use
TargetPointBuilder
Created in NX6.0.0
- targetPoint() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the target point .
- targetPoint() - Method in interface nxopen.cam.BoundaryTurnBlank
-
Returns the target point
License requirements: None.
- targetPoint() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the target point
License requirements: None.
- targetPoint() - Method in interface nxopen.cam.InspectionLinear5axisMoveToPointBuilder
-
Returns the point
License requirements: None.
- targetPoint() - Method in interface nxopen.cam.InspectionLinearMoveToPointBuilder
-
Returns the point
License requirements: None.
- targetPoint() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the point
License requirements: None.
- targetPoint() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target point
License requirements: None.
- targetPoint() - Method in interface nxopen.features.RPODimension
-
Returns the target point of dimension.
- TargetPointBuilder - Interface in nxopen.annotations
-
- TargetPointBuilder.Thickness - Class in nxopen.annotations
-
the types of target point thickness
- TargetPointCollection - Interface in nxopen.annotations
-
- targetPointMethod() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target point method
License requirements: None.
- targetPointOffset() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target point offset
License requirements: None.
- targetPoints() - Method in interface nxopen.annotations.AnnotationManager
-
TargetPoint collection .
- targetPointsList() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target points list
License requirements: solid_modeling ("SOLIDS MODELING")
.
- targetPosition() - Method in interface nxopen.display.CameraBuilder
-
Returns the coordinates of the target point
License requirements: None.
- targetProfileOrPlates() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the target profile or plate solid bodies for split.
- targetPunchType() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the type of punch target.
- TargetRectArea() - Constructor for class nxopen.uf.UFGdt.TargetRectArea
-
- TargetRectArea(Tag, int, Tag, boolean, Tag, UFGdt.ToleranceValue, UFGdt.ToleranceValue, double[]) - Constructor for class nxopen.uf.UFGdt.TargetRectArea
-
- targetReduction() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder
-
Returns the target value method
License requirements: None.
- targetRegion() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the target region which is a group of faces user chooses to unfrom to.
- targetRegion() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the target regions which is a color coded region
License requirements: None.
- targetReversed() - Method in interface nxopen.features.TrimExtendBuilder
-
Returns the target material side direction , targetReversed = true, means target direction is reversed
License requirements: None.
- targets() - Method in interface nxopen.features.BooleanBuilder
-
Returns the target bodies for the boolean operation
License requirements: None.
- targets() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the list of targets.
- targets() - Method in interface nxopen.features.shipdesign.ProfileTransitionBuilder
-
Returns the collector containing the target bodies.
- targets - Variable in class nxopen.uf.UFGdt.AskTargetsOfDatumData
-
- targetScaling() - Method in interface nxopen.cae.SignalProcessingPlotData
-
Returns the requested target scaling for the curve
License requirements: None.
- targetScope() - Method in interface nxopen.assemblies.RelinkerBuilder
-
Returns the current target scope.
- targetSelection() - Method in interface nxopen.ame.PageNamingBuilder
-
Returns the Target node selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- targetSelection() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the selected target object(s)
License requirements: None.
- targetSelection() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the target collector which contains either edge or face
License requirements: None.
- targetSelection() - Method in interface nxopen.tooling.EnlargeSurfaceBuilder
-
Returns the selection of target to create enlarge surface, body face only.
- targetSelectScope() - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
Returns the selection scope for target body selection.
- targetSet() - Method in interface nxopen.cae.DurSpecialistLocalDefinitionBuilder
-
Returns the target set
License requirements: None.
- targetSet() - Method in interface nxopen.cae.optimization.TBSGroupDefinition
-
Returns the target set
License requirements: None.
- targetSetCount() - Method in interface nxopen.cae.SetManager
-
Returns the count of objects in the set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- TargetSetDistributedPlanesData() - Constructor for class nxopen.cae.SetManager.TargetSetDistributedPlanesData
-
- targetSetManager() - Method in interface nxopen.cae.CaeRegionBuilder
-
Returns the target set handler associated with the Region object
License requirements: None.
- targetSetManager() - Method in interface nxopen.cae.NamedPropTableWithTargetSet
-
Returns the target set handler associated with the NamedPropTableWithTargetSet object comprised of
a property table and target set(s)
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- targetSetManager() - Method in interface nxopen.cae.SimBC
-
Returns the target set manager for
SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- targetSetManager() - Method in interface nxopen.cae.SimBCBuilder
-
Returns the target set manager for
SimBC
object
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
Created in NX4.0.0
- TargetSetMembersData() - Constructor for class nxopen.cae.SetManager.TargetSetMembersData
-
- TargetSetPlaneData() - Constructor for class nxopen.cae.SetManager.TargetSetPlaneData
-
- TargetSetPlaneWithOffsetData() - Constructor for class nxopen.cae.SetManager.TargetSetPlaneWithOffsetData
-
- targetSheet() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the target sheet
License requirements: None.
- targetSheetBody - Variable in class nxopen.uf.UFModeling.AskSewSheetBodyData
-
- targetSourceType() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the target type
License requirements: None.
- targetstartplanetag - Variable in class nxopen.die.TrimTaskBuilder.CheckAndMovePlanesData
-
Start plane in target operation.
- targetStockCollector() - Method in interface nxopen.routing.MergeStocksBuilder
-
Returns a collector object that holds target stock for merge operation.
- targetStockComponentCollector() - Method in interface nxopen.mechanicalrouting.MergeBuilder
-
Returns the routing component collector that collects target stock component
License requirements: routing_base ("Routing Basic")
.
- targetSymbolCfw - Variable in class nxopen.uf.UFDrf.SymbolPreferences
-
- targetSymbolColor() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the target symbol color
License requirements: None.
- targetSymbolFont() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the target symbol font
License requirements: None.
- targetSymbolWidth() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the target symbol width
License requirements: None.
- targetType() - Method in interface nxopen.cae.connections.NodalTarget
-
Returns the target type
License requirements: None.
- targetType() - Method in interface nxopen.cae.SimLoadRecipeMapEntry
-
- targetType() - Method in interface nxopen.facet.FillHoleBuilder
-
Returns the hole target type when filling holes.
- targetType() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the profile type of split target.
- targetType() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Returns the target type
License requirements: None.
- TargetUdefArea() - Constructor for class nxopen.uf.UFGdt.TargetUdefArea
-
- TargetUdefArea(Tag, int, Tag[], int, boolean, UFGdt.TargetNonPlanarData) - Constructor for class nxopen.uf.UFGdt.TargetUdefArea
-
- targetUnit() - Method in interface nxopen.cae.optimization.DAOObjective
-
Returns the target unit
License requirements: None.
- targetValue() - Method in interface nxopen.cae.optimization.DAOObjective
-
Returns the target value
License requirements: None.
- targetVector() - Method in interface nxopen.routing.AlignStockBuilder
-
Returns the target vector.
- targetVolume() - Method in interface nxopen.cae.optimization.TBSSmoothBuilder
-
Returns the target volume that is to be achieved iteratively by varying the isovalue.
- targetWeighting() - Method in interface nxopen.cae.SignalProcessingPlotData
-
Returns the requested target acoustical weighting to apply on the curve
License requirements: None.
- targetWidthAngular() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the target vision angle, which is defined in the standard.
- targetWidthLength() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the target width at the target distance position, which is defined in the standard.
- targetWidthLengthFar() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the target width at the far target distance position, which is defined in the standard.
- targetWindowSetting() - Method in interface nxopen.cae.xyplot.Preference
-
Returns the target window setting value
License requirements: None.
- task() - Method in interface nxopen.features.EmbedManagerBuilder
-
Returns the task to be performed.
- TASK_ASSIGNMENT - Static variable in class nxopen.tooling.ConcurrentDesignManagementBuilder.Types
-
the task assignment page
- taskDescription() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the task description string
License requirements: None.
- taucr - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingCurvedLongitudinalShearCombinedData
-
Shear stress allowable
- taucr - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatLongitudinalShearCombinedData
-
Shear stress allowable
- taucr - Variable in class nxopen.cae.aerostructures.author.ABB.MsPlateBucklingFlatShearBendingCombinedData
-
Shear stress allowable
- TAXIS_CONSTANT - Static variable in class nxopen.uf.UFDpud.TaxisOption
-
- TAXIS_PARAMS - Static variable in class nxopen.uf.UFDpud.Purpose
-
- TAXIS_USER_DEFINED - Static variable in class nxopen.uf.UFDpud.TaxisOption
-
- TAXIS_VARIABLE - Static variable in class nxopen.uf.UFDpud.TaxisOption
-
- tbarHoleParent() - Method in interface nxopen.die.RotorBuilder
-
Returns the T-bar holes parent builder of the rotor.
- tbc1 - Variable in class nxopen.cae.SimSolution.ConflictingBcPairByIndexData
-
BC1 for this conflict pair
- tbc2 - Variable in class nxopen.cae.SimSolution.ConflictingBcPairByIndexData
-
BC2 for this conflict pair
- TBEAM - Static variable in class nxopen.linedesigner.ColumnFeatureBuilder.ColumnType
-
- TBEAM - Static variable in class nxopen.linedesigner.ColumnGridEquipmentBuilder.ColumnType
-
- tblDepColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- tblDepDomColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- tblDepLabelValues() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the table dependent label values
License requirements: None.
- tblDepPtType() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- tblDepSymbolSize() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the table dependent symbol size
License requirements: None.
- tblIndepColor() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- tblIndepPtType() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
- TBR_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TBR_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TBSBaseDesignVariableBuilder - Interface in nxopen.cae.optimization
-
Represents the builder of
TBSDesignVariable
This is an abstract class, and cannot be created.
- TBSBaseDesignVariableBuilder.GroupOperator - Class in nxopen.cae.optimization
-
Defines the operator type to determine the design variable that used within the selection area
- TBSCastCondition - Interface in nxopen.cae.optimization
-
- TBSCastCondition.MiddlePlaneType - Class in nxopen.cae.optimization
-
Defines the middle plane type
- TBSCheckDOF - Interface in nxopen.cae.optimization
-
Represents the restriction of dispacement in the coordinate direction of the referenced coordinate system .
- TBSCheckDOF.CheckDofOption - Class in nxopen.cae.optimization
-
Represents the status of displacement restriction
- TBSCheckDOF.DofSettings - Class in nxopen.cae.optimization
-
the displacement restriction settings on three axial directions of referenced coordinate system
- TBSConstraint - Interface in nxopen.cae.optimization
-
- TBSConstraintBuilder - Interface in nxopen.cae.optimization
-
- TBSConstraintBuilder.ConstraintOption - Class in nxopen.cae.optimization
-
Defines the constraint type
- TBSConstraintBuilder.MagnitudeType - Class in nxopen.cae.optimization
-
Defines the type of constraint value
- TBSConstraintCollection - Interface in nxopen.cae.optimization
-
- TBSDesignArea - Interface in nxopen.cae.optimization
-
Represents the design area .
- TBSDesignResponse - Interface in nxopen.cae.optimization
-
- TBSDesignResponseBuilder - Interface in nxopen.cae.optimization
-
- TBSDesignResponseBuilder.Response - Class in nxopen.cae.optimization
-
Defines the design response type
- TBSDesignVariable - Interface in nxopen.cae.optimization
-
- TBSDesignVariableBuilder - Interface in nxopen.cae.optimization
-
- TBSDesignVariableCollection - Interface in nxopen.cae.optimization
-
- TBSEigenvalueOptimizationParameters - Interface in nxopen.cae.optimization
-
Represents the parameters to control an eigenvalue optimization .
- TBSGroupDefinition - Interface in nxopen.cae.optimization
-
Represents a group of nodes or elements .
- TBSGroupDefinition.DefinitionType - Class in nxopen.cae.optimization
-
Represents the definition method of a group
- TBSGroupDefinition.GroupElementType - Class in nxopen.cae.optimization
-
Represents the type of group elements
- TBSIOptimizationTest - Interface in nxopen.cae.optimization
-
Represents an interface to perform optimization test .
- TBSLoadCase - Interface in nxopen.cae.optimization
-
- TBSLoadCase.LayerOption - Class in nxopen.cae.optimization
-
Defines the location for calcuating shell stresses
- TBSLoadCase.SubcaseData - Class in nxopen.cae.optimization
-
- TBSLoadCase.SubstepData - Class in nxopen.cae.optimization
-
- TBSLoadCaseManager - Interface in nxopen.cae.optimization
-
Managers load cases .
- TBSLoadCaseManager.SelectionType - Class in nxopen.cae.optimization
-
Defines the selection of the loadcase
- TBSMeshSmooth - Interface in nxopen.cae.optimization
-
Represents the mesh smooth .
- TBSMeshSmooth.Strategy - Class in nxopen.cae.optimization
-
Specify the strategy of mesh smooth
- TBSObjectives - Interface in nxopen.cae.optimization
-
Represents the objective functions of an optimization .
- TBSObjectives.ObjectiveType - Class in nxopen.cae.optimization
-
Defines the target type of the design objective
- TBSOptimizationManager - Interface in nxopen.cae.optimization
-
Represents the optimization manager to contain the optimization solutions and take charge of
creating optimization objects
To obtain an instance of this class, refer to
SimSimulation
Created in NX8.0.0
- tbsoptimizationManager() - Method in interface nxopen.cae.SimSimulation
-
Returns the optimization manager belonging to this sim part .
- TBSOptimizationParameters - Interface in nxopen.cae.optimization
-
Represents the parameters to control an optimization
This is an abstract class, and cannot be created.
- TBSOptimizationSolution - Interface in nxopen.cae.optimization
-
Represents the solution to contain optimization setting
This is an abstract class, and cannot be created.
- TBSOptimizationSolution.JA_CAE_OPT_SOL_get_result - Class in nxopen.cae.optimization
-
- TBSOptimizationSolution.ResultStatus - Class in nxopen.cae.optimization
-
Define the status of optimization result
- TBSOptimizationSolutionBuilder - Interface in nxopen.cae.optimization
-
- TBSOptimizationSolutionBuilder.StrategyType - Class in nxopen.cae.optimization
-
Defines the optimization strategy
- TBSOptimizationSolutionCollection - Interface in nxopen.cae.optimization
-
- TBSOutputControlOptions - Interface in nxopen.cae.optimization
-
Represents the output result control options of the optimization .
- TBSOutputControlOptions.Op2Option - Class in nxopen.cae.optimization
-
Defines the op2 output option
- TBSRestrictArea - Interface in nxopen.cae.optimization
-
Represents the restrictions for the design variable in an optimization
To create or edit an instance of this class, use
TBSRestrictAreaBuilder
Created in NX8.0.0
- TBSRestrictAreaBuilder - Interface in nxopen.cae.optimization
-
Represents the builder of
TBSRestrictArea
This is an abstract class, and cannot be created.
- TBSRestrictAreaCollection - Interface in nxopen.cae.optimization
-
- TBSShapeLinkCondition - Interface in nxopen.cae.optimization
-
Represents the definition of link condition for shape restriction .
- TBSShapeLinkCondition.ManufacturingOption - Class in nxopen.cae.optimization
-
Defines the type of link condition
- TBSShapeOptimizationParameters - Interface in nxopen.cae.optimization
-
Represents the control parameters of shape optimization .
- TBSShapeOptimizationParameters.DisplacementStepsize - Class in nxopen.cae.optimization
-
the step size option for incrementing the displacement during the optimization operation
- TBSShapeOptimizationSolution - Interface in nxopen.cae.optimization
-
- TBSShapeOptimizationSolutionBuilder - Interface in nxopen.cae.optimization
-
- TBSShapeRestrictArea - Interface in nxopen.cae.optimization
-
Represents the restrictions of the design variable in Shape optimization
To create or edit an instance of this class, use
TBSShapeRestrictAreaBuilder
Created in NX8.5.0
- TBSShapeRestrictAreaBuilder - Interface in nxopen.cae.optimization
-
- TBSSingleObjective - Interface in nxopen.cae.optimization
-
- TBSSmooth - Interface in nxopen.cae.optimization
-
Represents the parameters that control the generation of surfaces by optimization
To create or edit an instance of this class, use
TBSSmoothBuilder
Created in NX8.0.0
- TBSSmoothBuilder - Interface in nxopen.cae.optimization
-
- TBSSmoothBuilder.Format - Class in nxopen.cae.optimization
-
Defines the output file format of surface representation
- TBSSmoothBuilder.IsoType - Class in nxopen.cae.optimization
-
Specifies the content saved to the output files
- TBSSmoothBuilder.OriginalSurfaceSmoothingOption - Class in nxopen.cae.optimization
-
Defines if the original surface is to be smoothed or remain unchanged
- TBSSmoothBuilder.ResultFiltering - Class in nxopen.cae.optimization
-
Defines if the element material values are to be filtered before the isocut
- TBSSmoothBuilder.SelfIntersectionCheckingOption - Class in nxopen.cae.optimization
-
Defines if the self-itersection checks are to be performed during the isocut, smoothing and data reduction
- TBSSmoothBuilder.SliceFormatOption - Class in nxopen.cae.optimization
-
Defines how to save slices
- TBSSmoothCollection - Interface in nxopen.cae.optimization
-
- TBSStopCondition - Interface in nxopen.cae.optimization
-
Represents the condtion to end an optimization .
- TBSTestFunction - Interface in nxopen.cae.optimization
-
Represents a test displacement for shape optimization or bead optimization .
- TBSTestFunction.Direction - Class in nxopen.cae.optimization
-
the direction of test displacements
- TBSTopologyControllerOptimizationParameters - Interface in nxopen.cae.optimization
-
Represents the parameters to control an optimization in controller strategy .
- TBSTopologyControllerOptimizationParameters.AutoFrozen - Class in nxopen.cae.optimization
-
Defines the automatic fromzen strategy
- TBSTopologyControllerOptimizationParameters.Speed - Class in nxopen.cae.optimization
-
Specifies the step size of increment
- TBSTopologyControllerOptimizationParameters.VolumeDefinitionMethod - Class in nxopen.cae.optimization
-
Represents the definition of volume that can be removed immediatedly in the first design cycle
- TBSTopologyLinkCondition - Interface in nxopen.cae.optimization
-
Represents the definition of symmetry and link conditions for topology optimization .
- TBSTopologyLinkCondition.AxisType - Class in nxopen.cae.optimization
-
Represents the axis of the symmetry coordinate system
- TBSTopologyLinkCondition.SymmetryOption - Class in nxopen.cae.optimization
-
Defines the type of link condition
- TBSTopologyOptimizationSolution - Interface in nxopen.cae.optimization
-
- TBSTopologyOptimizationSolutionBuilder - Interface in nxopen.cae.optimization
-
- TBSTopologyRestrictArea - Interface in nxopen.cae.optimization
-
Represents the restrictions of the design variable in topology optimization
To create or edit an instance of this class, use
TBSTopologyRestrictAreaBuilder
Created in NX8.0.0
- TBSTopologyRestrictAreaBuilder - Interface in nxopen.cae.optimization
-
- TBSTopologyRestrictAreaBuilder.CheckTypeOption - Class in nxopen.cae.optimization
-
Defines the type of restriction
- TBSTopologySensitivityOptimizationParameters - Interface in nxopen.cae.optimization
-
Represents the parameters to control an optimization in sensitivity strategy .
- TBSTopologySensitivityOptimizationParameters.DensityUpdate - Class in nxopen.cae.optimization
-
the method defines how the densities are updated in the method of moving asymptotes
- TBSTopologySensitivityOptimizationParameters.MaterialInterpolation - Class in nxopen.cae.optimization
-
the relationshp between relative density and relative element stiffness
- TC_ENG - Static variable in class nxopen.layout2d.Layout2dDefinitionLocation
-
- TC_PLUS_NOISE - Static variable in class nxopen.ModelingViewHighQualityImage.DisplayTechniqueType
-
Random noise is added to each pixel where the noise is
specifically tailored for true color display devices.
- tclfilename - Variable in class nxopen.sim.IsvControlPanelBuilder.PostprocessorFilenameData
-
The tcl filename with full path
- tComplyingSnap - Variable in class nxopen.mechatronics.DynamicObjectTableBuilder.Instance
-
Complying SnapPoint tag
- TCON_PARAM - Static variable in class nxopen.ame.PlcDataType
-
- tconstraint1 - Variable in class nxopen.cae.SimSolution.ConflictingConstraintPairByIndexData
-
constraint1 for this constraint pair
- tconstraint2 - Variable in class nxopen.cae.SimSolution.ConflictingConstraintPairByIndexData
-
constraint2 for this constraint pair
- TCP - Static variable in class nxopen.mechatronics.McdSignalServerConfigurationtype
-
- TCP - Static variable in class nxopen.mechatronics.SignalMappingBuilder.AppOption
-
- tcpClient() - Method in interface nxopen.mechatronics.ExternalSignalConfigurationBuilder
-
Returns the TCP builder that holds the configuration for TCP clients.
- TCPCLIENT - Static variable in class nxopen.mechatronics.UDPSignalServerBuilder.Protocol
-
- TCPClientBuilder - Interface in nxopen.mechatronics
-
- TCPClientBuilder.ConnectionInformationData - Class in nxopen.mechatronics
-
- TCPClientBuilder.ConnectionNamesData - Class in nxopen.mechatronics
-
- TCPClientBuilder.Signal - Class in nxopen.mechatronics
-
Represents TCP signal definition structure.
- TCPSERVER - Static variable in class nxopen.mechatronics.UDPSignalServerBuilder.Protocol
-
- tcpsignalServer() - Method in interface nxopen.mechatronics.MCDSignalServerConfigurationBuilder
-
Returns the TCPSignalServerBuilder that holds the configuration for TCPSignalServer.
- TCPSignalServerBuilder - Interface in nxopen.mechatronics
-
- TCPSignalServerBuilder.ConnectionInformationData - Class in nxopen.mechatronics
-
- TCPSignalServerBuilder.Signal - Class in nxopen.mechatronics
-
Represents the data type
- TCR - Static variable in class nxopen.Validation.InputType
-
Input rules are from TcR
- TCSavedQueriesBuilder - Interface in nxopen.ame
-
- TcserverSettingsData() - Constructor for class nxopen.pdm.PdmSession.TcserverSettingsData
-
- TCUTTER - Static variable in class nxopen.cam.Tool.Types
-
Milling tool-T cutter
- TCUTTER - Static variable in class nxopen.features.AnalyzePocketBuilder.ToolTypes
-
T Cutter.
- TCUTTER - Static variable in class nxopen.features.BlendPocketBuilder.ToolTypes
-
T Cutter.
- tDefiningSnap - Variable in class nxopen.mechatronics.DynamicObjectTableBuilder.Instance
-
Defining SnapPoint tag
- tDynamicObject - Variable in class nxopen.mechatronics.DynamicObjectTableBuilder.Instance
-
Dynamic Object
- teach() - Method in interface nxopen.cam.FeatureTeaching
-
Teaches the new feature
License requirements: fbm_author ("FBM Author")
.
- teach() - Method in interface nxopen.cam.MapFeatureTeaching
-
Teaches feature mapping
License requirements: fbm_author ("FBM Author")
.
- teach() - Method in interface nxopen.cam.OperationSetTeaching
-
Teaches new operation sets
License requirements: fbm_author ("FBM Author")
.
- teach() - Method in interface nxopen.cam.OperationTeaching
-
Teaches the new operations
License requirements: fbm_author ("FBM Author")
.
- Teaching - Interface in nxopen.cam
-
Represents a Teaching Builder
Abstract
.
- teachmodeCreateSubop(Tag, UFParam.TtmoprSubopType) - Method in interface nxopen.uf.UFTurn
-
- TeachmodeCreateSubopData() - Constructor for class nxopen.uf.UFTurn.TeachmodeCreateSubopData
-
- TeachmodeEngageSettingsBuilder - Interface in nxopen.cam
-
- TeachmodeLinearMoveBuilder - Interface in nxopen.cam
-
- TeachmodeLinearMoveBuilder.CurveToolPositionTypes - Class in nxopen.cam
-
the types for positioning to curves
- TeachmodeLinearMoveBuilder.EndPositionTypes - Class in nxopen.cam
-
the end position definition types
- TeachmodeLinearMoveBuilder.InitialRetractTypes - Class in nxopen.cam
-
the initial retract choices
- TeachmodeLinearMoveBuilder.MoveTypes - Class in nxopen.cam
-
the movement types
- TeachmodeProfileMoveBuilder - Interface in nxopen.cam
-
- TeachmodeProfileMoveBuilder.DriveGeometryTypes - Class in nxopen.cam
-
the drive geometry types
- TeachmodeProfileMoveBuilder.StartStopPositionMethods - Class in nxopen.cam
-
the start and stop positioning methods
- TeachmodeRetractSettingsBuilder - Interface in nxopen.cam
-
- TeachmodeTurning - Interface in nxopen.cam
-
Represents a Turning Teachmode operation
To create or edit an instance of this class, use
TeachmodeTurningBuilder
Created in NX7.5.0
- TeachmodeTurningBuilder - Interface in nxopen.cam
-
- TEAL_TEAL_CYAN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- TEAL_TEAL_GREEN_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- TEAMCENTER - Static variable in class nxopen.annotations.ImportAutocadBlockBuilder.Type
-
Teamcenter Symbol
- TEAMCENTER - Static variable in class nxopen.features.BodyByEquationBuilder.LocationTypes
-
Worksheet is in Teamcenter.
- TEAMCENTER - Static variable in class nxopen.features.EmbedManagerBuilder.LocationTypes
-
File exists in Teamcenter.
- TEAMCENTER - Static variable in class nxopen.features.MapleBuilder.LocationType
-
Deprecated.
Worksheet is in Teamcenter.
- TEAMCENTER - Static variable in class nxopen.features.MathIntegrationBuilder.LocationTypes
-
Worksheet is in Teamcenter.
- TEAMCENTER - Static variable in class nxopen.issue.IssueManager.Mode
-
Teamcenter mode
- TEAMCENTER - Static variable in class nxopen.motion.FlexBodyBuilder.SourceType
-
- TEAMCENTER - Static variable in class nxopen.pdm.PartOperationImportBuilder.ValidationRuleSetFileBrowseOption
-
- TEAMCENTER - Static variable in class nxopen.validate.RequirementCollection.SourceTypeOptions
-
- TEAMCENTER - Static variable in class nxopen.visualreporting.VisualReport.SaveDestinationOption
-
Saves the report in the Teamcenter database.
- TEAMCENTER_COMMUNITY - Static variable in class nxopen.issue.IssueManager.Mode
-
Teamcenter community mode
- TEAMCENTER_FILE - Static variable in class nxopen.validate.RequirementCollection.SourceTypeOptions
-
- TEAMCENTER_OBJECT_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Teamcenter Object property
- TEAMCENTER_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
Teamcenter property
- techniqueType() - Method in interface nxopen.display.CgfxMattexBuilder
-
- TEE - Static variable in class nxopen.cae.DurabilityStrainGageAnalyzerBuilder.GageTypeEnum
-
Tee
- tee - Variable in class nxopen.pid.PipeBuilder.EndTeeData
-
- tee - Variable in class nxopen.pid.PipeBuilder.StartTeeData
-
- TeeJunctionBuilder - Interface in nxopen.ame
-
- teeSize() - Method in interface nxopen.pid.PreferencesConnectionBuilder
-
Returns the tee size.
- TEETH_NUMBER - Static variable in class nxopen.cam.VerticalPosition.OffsetTypes
-
Number of Teeth
- teethNumber() - Method in interface nxopen.cam.VerticalPosition
-
Returns the teeth number
License requirements: None.
- tempDisplayElement(Tag, int, double, boolean, boolean, boolean, UFDisp.PolyMarker, boolean) - Method in interface nxopen.uf.UFSf
-
- tempDisplayNode(Tag, int, double, boolean, String, UFDisp.PolyMarker) - Method in interface nxopen.uf.UFSf
-
- tempDispResults(UFSf.ColorAttr, UFSfLegend.Attr) - Method in interface nxopen.uf.UFSf
-
- TEMPERATURE - Static variable in class nxopen.cae.optimization.Response
-
- TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
-
- TEMPERATURE - Static variable in class nxopen.cae.SimLoadSet.Type
-
Temperature Set.
- TEMPERATURE - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Temperature
- TEMPERATURE - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Temperature
- TEMPERATURE - Static variable in class nxopen.cae.XyFunctionMaterialType
-
Function is Temperature
- TEMPERATURE - Static variable in class nxopen.cae.XyFunctionMeasure
-
Temperature unit
- temperature() - Method in interface nxopen.mechatronics.PneumaticCylinderBuilder
-
Returns the gas temperature (assumed constant).
- TEMPERATURE_C - Static variable in class nxopen.cae.XyFunctionUnit
-
Temperature unit: C
- TEMPERATURE_DIFFERENCE - Static variable in class nxopen.cae.Result.Quantity
-
- TEMPERATURE_ERROR - Static variable in class nxopen.cae.Result.Quantity
-
- TEMPERATURE_F - Static variable in class nxopen.cae.XyFunctionUnit
-
Temperature unit: F
- TEMPERATURE_GRADIENT - Static variable in class nxopen.cae.Result.Quantity
-
- TEMPERATURE_K - Static variable in class nxopen.cae.XyFunctionUnit
-
Temperature unit: K
- TEMPERATURE_LOAD - Static variable in class nxopen.cae.Result.Quantity
-
- TEMPERATURE_R - Static variable in class nxopen.cae.XyFunctionUnit
-
Temperature unit: R
- TEMPERATURE_VAR_RATE - Static variable in class nxopen.cae.Result.Quantity
-
- temperaturePlaces() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the temperature decimal places
License requirements: None.
- temperatureUnit - Variable in class nxopen.cae.Result.ResultBasicUnit
-
- temperatureUnits() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the temperature units
License requirements: None.
- TEMPLATE - Static variable in class nxopen.features.shipdesign.ProfileCutoutBuilder.CollarPlateCreationApproaches
-
Template approach - Use Standard Part Framework to create collar plate.
- Template - Interface in nxopen.partfamily
-
- TEMPLATE_AND_PAX - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.ActionTypeEnum
-
- TEMPLATE_ASSY - Static variable in class nxopen.routing.RouteManager.PartType
-
- TEMPLATE_BASED - Static variable in class nxopen.cam.FeatureProcessBuilder.FeatureProcessType
-
Template based operation creation
- TEMPLATE_BRIDGE_CURVE - Static variable in class nxopen.features.StyledCornerBuilder.ShapeControlMethodsTypes
-
Template bridge curve
- TEMPLATE_CURVE - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Template, based on the existing curve
- TEMPLATE_CURVE - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
- TEMPLATE_CURVE - Static variable in class nxopen.features.BridgeCurveBuilderEx.ShapeControlMethods
-
Shape by a template curve
- TEMPLATE_CURVE - Static variable in class nxopen.features.FitCurveBuilder.FittingParametersOptions
-
Fit to template spline
- TEMPLATE_CURVE_UNABLE_TO_EDIT - Static variable in class nxopen.uf.UFConstants
-
- TEMPLATE_MEMBERS - Static variable in class nxopen.ame.SelectAndHighlightBuilder.SelType
-
- TEMPLATE_ONLY - Static variable in class nxopen.drawings.MarkAsTemplateBuilder.ActionTypeEnum
-
- templateBaseTcType() - Method in interface nxopen.pid.FileNewApplicationBuilder
-
Returns the BaseTCType of the template part from which to create the new file
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- templateCategoryName() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the Template Category Name.
- templateComponent - Variable in class nxopen.uf.UFAssem.IsetArrayData
-
- templateComponent - Variable in class nxopen.uf.UFAssem.McArrayData
-
- templateConfig() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
The template configuration.
- templateCurve() - Method in interface nxopen.features.BridgeCurveBuilderEx
-
Returns the template curve
License requirements: None.
- templateCurve() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the template curve
License requirements: None.
- TemplateData() - Constructor for class nxopen.cam.FeatureProcessBuilder.TemplateData
-
- templateDelete(int) - Method in interface nxopen.cae.Post
-
Delete a loaded template xml file specified by template_id.
- templateFile() - Method in interface nxopen.cam.Preferences
-
Returns the template file
License requirements: None.
- templateFile() - Method in interface nxopen.DxfdwgImporter
-
Returns the TemplateFile command - This will be used as template for dxf/dwg import
License requirements: None.
- templateFile() - Method in interface nxopen.report.Report
-
Returns the template document file.
- templateFile() - Method in interface nxopen.weld.WeldImportBuilder
-
Returns the template file indicating attribute mapping.
- templateFileName() - Method in interface nxopen.FileNew
-
Returns the name of the template part from which to create the new file
License requirements: None.
- templateFileName() - Method in interface nxopen.pid.FileNewApplicationBuilder
-
Returns the name of the template part from which to create the new file
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- templateFileName() - Method in interface nxopen.weld.ExportWeldBuilder
-
Returns the template file name
License requirements: ugweld ("UG WELD")
.
- templateId - Variable in class nxopen.cae.Post.LoadTemplateData
-
- templateInstance() - Method in interface nxopen.ame.InstantiateTemplateBulkBuilder
-
Returns the created instance
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- TemplateItem - Interface in nxopen.report
-
Represents a template item object.
- templateManager() - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Returns the template manager.
- TemplateManager - Interface in nxopen.partfamily
-
This class serves as the manager for all the part family related operations.
- templateName() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the template name
License requirements: None.
- templateName() - Method in interface nxopen.features.shipdesign.DrawingTemplateBuilder
-
Returns the template
License requirements: None.
- templateName() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the Template Name.
- templateName() - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
Returns the template name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- templateName() - Method in interface nxopen.partfamily.Template
-
Returns the name of the part family template
License requirements: solid_modeling ("SOLIDS MODELING")
.
- templateName() - Method in interface nxopen.tooling.EjectorTableBuilder
-
Returns the drawing template name.
- templateName - Variable in class nxopen.uf.UFUi.UgmgrAskCreatePartFileNameData
-
- templateNameAndDescription() - Method in interface nxopen.ame.CreateTemplateBuilder
-
Returns the template name and description ui block
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- templatePresentationName() - Method in interface nxopen.FileNew
-
Returns the presentation name of the underlying template which is used for the new file being created
License requirements: None.
- templatePresentationName() - Method in interface nxopen.pid.FileNewApplicationBuilder
-
Returns the presentation name of the underlying template which is used for creating new file
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- templateRename(int, String) - Method in interface nxopen.cae.Post
-
Rename a loaded template xml file specified by template_id.
- templates() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the templates option.
- templateSearch(String) - Method in interface nxopen.cae.Post
-
Search for a template handle for loaded template xml file specified by its name.
- templateSetAsDefault(int) - Method in interface nxopen.cae.Post
-
Set a loaded template as the default postview settings to be used for all subsequent
PostviewCreate calls.
- templateSetName() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the template set name assigned to the part attribute
License requirements: None.
- templateSetUsed - Variable in class nxopen.uf.UFCam.Preferences
-
- templateSheet() - Method in interface nxopen.linedesigner.ExportToDWGBuilder
-
Returns the template sheet type
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- templateTcType() - Method in interface nxopen.pid.FileNewApplicationBuilder
-
Returns the TCType of the template part from which to create the new file
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- templateTool - Variable in class nxopen.uf.UFCam.Preferences
-
- templateType() - Method in interface nxopen.drawings.MarkAsTemplateBuilder
-
Returns the template Type will be one of the following:
Sheet
To save it as Sheet template.
- templateType() - Method in interface nxopen.FileNew
-
Returns the template type for the new file being created
License requirements: None.
- templateType() - Method in interface nxopen.pid.FileNewApplicationBuilder
-
Returns the template type for the new file being created
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- templateUnits() - Method in interface nxopen.pid.FileNewApplicationBuilder
-
Returns the units for the new file being created
License requirements: nx_pid_design_author ("NX P and ID Design Author")
.
- TEMPORARILY_ENABLED - Static variable in class nxopen.preferences.ObjectPreferences.Translucency
-
- TEMPORARY - Static variable in class nxopen.Persistence
-
- TEMPORARY - Static variable in class nxopen.routing.ComponentName
-
Component name is temporary, it has not been renamed.
- TEMPORARY - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Temporary classification
- TEMPORARY - Static variable in class nxopen.validate.OverrideBuilder.RequestTypes
-
- tempOrientation() - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
Returns the temp orientation setting.
- tempPosition() - Method in interface nxopen.mechanicalrouting.TransformBlockBuilder
-
Returns the temp position setting.
- TEN - Static variable in class nxopen.cae.xyplot.AxisDBScale
-
Db 10
- TEN - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest ten
- TEN - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions
-
Display in 10 colors.
- TEN - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
the snap size is 10
- TEN_MILLIONTH - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest ten millionth
- TEN_THOUSANDTH - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest ten thousandth
- tensileStrength() - Method in interface nxopen.tooling.LsdynaGeometryPreparationBuilder
-
Returns the restraining force.
- TENSION_ONLY - Static variable in class nxopen.motion.ConnectorBuilder.ApplicationDirection
-
Aplication direction: Tension Only
- TENSION_SAFETY_FACTOR - Static variable in class nxopen.cae.Result.Quantity
-
- TENSOR - Static variable in class nxopen.cae.Result.DataType
-
- TENSORS - Static variable in class nxopen.cae.Post.Style
-
- TENTATIVE - Static variable in class nxopen.geometricutilities.ParentEquivalencyMap.Status
-
tentative
- TENTH - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest tenth
- TENTH - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
the snap size is 0.1
- TENTH - Static variable in class nxopen.weld.WeldGroupIdColor
-
Tenth Group Id Color Index
- terDatLetter() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the ter dat letter
License requirements: None.
- terDirection() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the ter xdirection
License requirements: None.
- TERM - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.DeviceTypeOptions
-
Use TERM
- Terminal - Class in nxopen.routing
-
Option to query if an existing
ISegment
is a terminal segment.
- TERMINAL_DIAGRAM - Static variable in class nxopen.ame.DocumentType
-
- TERMINAL_DIAGRAM - Static variable in class nxopen.ame.PageBuilder.Types
-
- TERMINAL_PORT - Static variable in class nxopen.routing.Port.PortType
-
Terminal Port
- TERMINAL_SEG - Static variable in class nxopen.routing.Terminal
-
Is a terminal segment
- TERMINAL_STRIP_LIST - Static variable in class nxopen.ame.DocumentType
-
- TERMINAL_STRIP_LIST - Static variable in class nxopen.ame.PageBuilder.Types
-
- TerminalPort - Interface in nxopen.routing
-
- terminalPort() - Method in interface nxopen.routing.TerminalPortBuilder
-
Returns the TerminalPort
License requirements: routing_harness ("Routing Harness")
.
- terminalPortBuilder() - Method in interface nxopen.routing.RouteManager
-
Creates a
TerminalPortBuilder
License requirements: routing_harness ("Routing Harness")
Created in NX7.5.0
- TerminalPortBuilder - Interface in nxopen.routing
-
- TerminalPortCollection - Interface in nxopen.routing
-
- terminalPorts() - Method in interface nxopen.routing.RouteManager
-
TerminalPort Collection .
- terminalSegmentSolidDisplay() - Method in interface nxopen.preferences.RoutingElectrical
-
Returns the terminal segment solid display option
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- terminate() - Method in interface nxopen.Spreadsheet
-
Terminates excel sheet for opened part.
- terminate() - Method in interface nxopen.uf.UFClone
-
- terminate() - Method in interface nxopen.uf.UFMotion
-
- terminate() - Method in interface nxopen.uf.UFSmd
-
- terminate() - Method in interface nxopen.uf.UFUgmgr
-
- TERMINATE_CB - Static variable in class nxopen.uf.UFClone.NotifyCb
-
- terminateArticulation() - Method in interface nxopen.uf.UFMotion
-
- terminateCb(PartOperationImportCallbackData) - Method in interface nxopen.pdm.PartOperationImportObserver.TerminateCb
-
User defined Terminate callback that is called during destruction of import builder
License requirements: None.
- terminateEditParameters(Curve) - Method in interface nxopen.die.AddendumSectionBuilder
-
Cleans up environment after editing parameters of a section.
- terminateSequencing() - Method in interface nxopen.uf.UFAssem
-
- terminateSketch() - Method in interface nxopen.uf.UFSket
-
- terminating() - Method in interface nxopen.pid.Port
-
Returns the indicator of the port's terminating.
- terminator - Variable in class nxopen.diagramming.LeaderLineBuilder.TerminatorData
-
- terminator - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- TerminatorData() - Constructor for class nxopen.diagramming.LeaderLineBuilder.TerminatorData
-
- terminatorType() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the terminator type
License requirements: None.
- terminatorType() - Method in interface nxopen.annotations.LeaderData
-
Returns the terminator type
License requirements: None.
- terms - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskConstraintEquationData
-
Term of dof in the constraint equation.
- terms - Variable in class nxopen.uf.UFRoute.AskMultiportTerminalsData
-
- terms - Variable in class nxopen.uf.UFRoute.AskPortTerminalPortsData
-
- tertiary - Variable in class nxopen.uf.UFGdt.DrfData
-
- tertiaryCompoundDatumReference() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the tertiary compound datum reference
License requirements: None.
- tertiaryDatumDualMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- tertiaryDatumDualText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- tertiaryDatumExtendedText() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the tertiary datum extended text.
- tertiaryDatumMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- tertiaryDatumReference() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the tertiary datum reference
License requirements: None.
- tertiaryDatumText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
- tertiaryDirection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the tertiary direction
License requirements: None.
- tertiaryOffsetGeometry() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the tertiary offset geometry
License requirements: None.
- tertiaryRoughnessText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the tertiary roughness text
License requirements: None.
- tertiaryRoughnessType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the tertiary roughness enum
License requirements: None.
- tertiarySelection() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the tertiary selection
License requirements: None.
- tertiaryStandardAngle() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Returns the tertiary standard angle.
- tertiaryState() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the tertiary state
License requirements: None.
- tertiaryType() - Method in interface nxopen.cam.InspectionAlignmentAssistantBuilder
-
Returns the tertiary feature type
License requirements: None.
- terXorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the ter xorigin
License requirements: None.
- terYorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the ter yorigin
License requirements: None.
- terZorigin() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the ter zorigin
License requirements: None.
- tessellation() - Method in interface nxopen.ObjectTypeSelector
-
Returns the Tessellation - This should be set to true if Tessellation information is to be written to STEP file
License requirements: None.
- tessellationFactor() - Method in interface nxopen.features.LatticeBuilder
-
Returns the tessellation factor of the lattice creation.
- tessellationFile() - Method in interface nxopen.motion.BodyContactSphereToCAD
-
Returns the tessellation file
License requirements: mechanisms ("MECHANISMS")
.
- tessOption() - Method in interface nxopen.JtCreator
-
Returns the m_tessOption * - Specifies the type for Level of Details, whether Defined Level or Use NX Resolution
License requirements: None.
- tessOption() - Method in interface nxopen.ListCreator
-
Returns the m_tessOption * - Specifies the type for Level of Details, whether Defined Level or Use NX Resolution
License requirements: None.
- test() - Method in interface nxopen.cam.FeatureTeaching
-
Tests the new feature
License requirements: fbm_author ("FBM Author")
.
- TEST - Static variable in class nxopen.validate.ResultObject.ResultTypes
-
Test
- TEST_CUT_AND_FINISH - Static variable in class nxopen.cam.TurnRoughFinishTestCut.SequenceTypes
-
Test Cut Sequence: Test Cut and Finish
- TEST_CUT_ONLY - Static variable in class nxopen.cam.TurnRoughFinishTestCut.SequenceTypes
-
Test Cut Sequence: Test Cut Only
- testCount - Variable in class nxopen.cae.modelcheck.ElementQualityCheckResults.TestSummary
-
indicates the total number of elements tested for this test
- testCut() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the Test Cut
License requirements: None.
- testDirectionOption() - Method in interface nxopen.cae.optimization.TBSTestFunction
-
Returns the direction of test displacements
License requirements: None.
- testFunction() - Method in interface nxopen.cae.optimization.TBSShapeOptimizationSolution
-
Returns the test function
License requirements: None.
- TestResult - Interface in nxopen.cae.modelcheck
-
Represents quality checking result of a quality test
To obtain an instance of this class use CAE.ModelCheck.ElementTestResult.GetTestResults
Created in NX8.5.0
- TestSummary() - Constructor for class nxopen.cae.modelcheck.ElementQualityCheckResults.TestSummary
-
- TestSummary(TestValueTypes.TestType, double, boolean, int, int, int) - Constructor for class nxopen.cae.modelcheck.ElementQualityCheckResults.TestSummary
-
Constructor for the TestSummary object.
- testType - Variable in class nxopen.cae.modelcheck.ElementQualityCheckResults.TestSummary
-
the test type
- testType() - Method in interface nxopen.cae.modelcheck.TestResult
-
Returns the test type
License requirements: None.
- testValue() - Method in interface nxopen.cae.modelcheck.TestResult
-
Returns the test value.
- testValueCount() - Method in interface nxopen.cae.modelcheck.ElementQualitySetting
-
Returns the count of
QualityTestValue
in the setting
License requirements: None.
- TestValueTypes - Interface in nxopen.cae.modelcheck
-
Represents the quality check criteria value settings
No Creator this holds an enum shared by other classes
.
- TestValueTypes.CriteriaType - Class in nxopen.cae.modelcheck
-
the alert level of a criteria value
- TestValueTypes.ElementReference - Class in nxopen.cae.modelcheck
-
represents an element reference definition associated with this test
- TestValueTypes.Result - Class in nxopen.cae.modelcheck
-
the checking result
- TestValueTypes.TestType - Class in nxopen.cae.modelcheck
-
the test types
- TestValueTypes.Validator - Class in nxopen.cae.modelcheck
-
indicates how to compare the check result with the criteria value
- TET - Static variable in class nxopen.cae.ElementTypes.Shape
-
Tetrahedral
- TET10 - Static variable in class nxopen.uf.UFSf.ElementType
-
- TET4 - Static variable in class nxopen.uf.UFSf.ElementType
-
- TET_COLLAPSE - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- TET_MIXED_ORDER - Static variable in class nxopen.uf.UFSf.ElementType
-
- tetMeshSizeVariation - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- TETRAHEDRON_GRAPH - Static variable in class nxopen.features.LatticeBuilder.LatticeTypes
-
- text() - Method in interface nxopen.annotations.DraftingNoteBuilder
-
Returns the text
License requirements: None.
- text() - Method in interface nxopen.annotations.FeatureControlFrameBuilder
-
Returns the text
License requirements: None.
- text() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the text
License requirements: None.
- text() - Method in interface nxopen.annotations.SearchCriteriaPMINotesBuilder
-
Returns the text
License requirements: None.
- TEXT - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Text
- TEXT - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- TEXT - Static variable in class nxopen.annotations.TextComponent.TextType
-
primary dimension text or main text for draft aids
- text() - Method in interface nxopen.annotations.TitleBlockCellBuilder
-
Returns the evaluated text of the cell.
- text - Variable in class nxopen.assemblies.ClearanceAnalysisBuilder.IsPairIncludedData
-
the text
- text - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
text associated with the interference
- TEXT - Static variable in class nxopen.blockstyler.Tree.ColumnDisplay
-
Text
- Text() - Constructor for class nxopen.cae.Post.Text
-
- Text(int, int, NXColor, int) - Constructor for class nxopen.cae.Post.Text
-
Constructor for the Text object.
- TEXT - Static variable in class nxopen.cae.PropertyTable.PropertyType
-
- text() - Method in interface nxopen.cam.Cycle
-
Returns the text
License requirements: None.
- TEXT - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Text
- TEXT - Static variable in class nxopen.CGMBuilder.OutputTextOption
-
Text is kept as text
- text() - Method in interface nxopen.diagramming.AnnotationBuilder
-
Returns the text should be used only when textType is Diagramming.AnnotationBuilder.TextTypeOption.Fixed
License requirements: None.
- text() - Method in interface nxopen.diagramming.tables.CellBuilder
-
Returns the text on cell.
- Text - Interface in nxopen.features
-
Represents a text feature
To create or edit an instance of this class, use
TextBuilder
Created in NX7.5.1
- text() - Method in interface nxopen.features.TextBuilder
-
Returns the string expression representing the text
License requirements: None.
- text() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Returns the u icomp text with symbols0
License requirements: routing_harness ("Routing Harness")
.
- TEXT - Static variable in class nxopen.issue.IssueAttachment.Type
-
Text type
- TEXT - Static variable in class nxopen.issue.IssueProperty.Type
-
Text type
- Text - Interface in nxopen.markup
-
- TEXT - Static variable in class nxopen.openxml.DocumentData.Type
-
the document data type of text
- TEXT - Static variable in class nxopen.partfamily.FamilyAttribute.AttrType
-
text attribute
- TEXT - Static variable in class nxopen.pdm.FileManagement.FileType
-
- TEXT - Static variable in class nxopen.PrintPDFBuilder.OutputTextOption
-
Text is kept as text
- TEXT - Static variable in class nxopen.report.UserInput.Type
-
User input for text data
- TEXT - Static variable in class nxopen.STLCreator.OutputTypeEnum
-
output type text
- text - Variable in class nxopen.uf.UFClear.InterfData
-
- text - Variable in class nxopen.uf.UFClear.IsPairIncludedData
-
- text - Variable in class nxopen.uf.UFDrf.AppendedText
-
- text - Variable in class nxopen.uf.UFDrf.AssortpartText
-
- text - Variable in class nxopen.uf.UFDrf.CustomSymbol
-
- text - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- Text() - Constructor for class nxopen.uf.UFDrf.Text
-
- Text(String, int, String[]) - Constructor for class nxopen.uf.UFDrf.Text
-
- text() - Method in interface nxopen.UFSession
-
- text - Variable in class nxopen.Validation.LookupTextData
-
Text associate with the key
- TEXT - Static variable in class nxopen.Validation.MapType
-
Text map
- text() - Method in interface nxopen.weld.WeldLabelBuilder
-
- TEXT_ABOVE - Static variable in class nxopen.annotations.ChamferStubType
-
Specifies text above stub
- TEXT_AFTER - Static variable in class nxopen.annotations.ChamferStubType
-
Specifies text after stub
- TEXT_APP_AT_CREATION - Static variable in class nxopen.uf.UFDrf.TextType
-
- TEXT_APP_AT_EDITING - Static variable in class nxopen.uf.UFDrf.TextType
-
- TEXT_AS_CHARACTERS - Static variable in class nxopen.uf.UFCgm.TextMode
-
- TEXT_AS_POLYLINES - Static variable in class nxopen.uf.UFCgm.TextMode
-
- TEXT_AT_ANGLE - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType
-
- TEXT_BEST_FIT - Static variable in class nxopen.uf.UFCgm.TextMode
-
- TEXT_BOTTOM - Static variable in class nxopen.annotations.LeaderAlignment
-
- TEXT_BOTTOM - Static variable in class nxopen.uf.UFDrf.VerticalTextJust
-
- TEXT_BOTTOM_MAX - Static variable in class nxopen.annotations.LeaderAlignment
-
extend leader to maximum
- TEXT_BOTTOM_MAX_UNDERLINE - Static variable in class nxopen.annotations.LeaderAlignment
-
extend leader to maximum, underline all lines
- TEXT_BOTTOM_UNDERLINE - Static variable in class nxopen.annotations.LeaderAlignment
-
underline all lines
- TEXT_BUFFER_LENGTH - Static variable in class nxopen.uf.UFConstants
-
- TEXT_CENTER - Static variable in class nxopen.uf.UFDrf.TextJust
-
- TEXT_FILE - Static variable in class nxopen.Validation.InputType
-
Input rules are from a text file
- TEXT_LEFT - Static variable in class nxopen.uf.UFDrf.TextJust
-
- TEXT_MIDDLE - Static variable in class nxopen.uf.UFDrf.VerticalTextJust
-
- TEXT_OVER_DIMENSION_LINE - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType
-
- TEXT_RESERVED1 - Static variable in class nxopen.uf.UFCgm.TextMode
-
- TEXT_RESERVED2 - Static variable in class nxopen.uf.UFCgm.TextMode
-
- TEXT_RIGHT - Static variable in class nxopen.uf.UFDrf.TextJust
-
- TEXT_TOP - Static variable in class nxopen.annotations.LeaderAlignment
-
- TEXT_TOP - Static variable in class nxopen.uf.UFDrf.VerticalTextJust
-
- TEXT_TOP_MAX - Static variable in class nxopen.annotations.LeaderAlignment
-
extend leader to maximum
- TEXT_TOP_MAX_UNDERLINE - Static variable in class nxopen.annotations.LeaderAlignment
-
extend leader to maximum, underline all lines
- TEXT_TOP_UNDERLINE - Static variable in class nxopen.annotations.LeaderAlignment
-
underline all lines
- TEXT_TYPE - Static variable in class nxopen.Part.PartFamilyAttrType
-
Deprecated.
text attribute
- textAboveLeader() - Method in interface nxopen.annotations.RadialStyleBuilder
-
- textAboveLeader - Variable in class nxopen.uf.UFDrf.DiameterRadiusPreferences
-
- textAlignment() - Method in interface nxopen.annotations.DraftingNoteBuilder
-
Returns the text alignment
License requirements: drafting ("DRAFTING") OR cam_base ("CAM BASE") OR insp_programming ("INSPECTION PROGRAMMING")
.
- textAlignment() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the text alignment
License requirements: None.
- TextAlignment - Class in nxopen.cae.xyplot
-
Represents the text alignment
- textAlignment() - Method in interface nxopen.diagramming.TextStyleBuilder
-
Returns the text alignment of the annotation
License requirements: None.
- textAllowWrapping() - Method in interface nxopen.diagramming.TextStyleBuilder
-
Returns the text allow wrapping
License requirements: None.
- textAngle() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dimension text angle
License requirements: None.
- textAngle() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the text angle
License requirements: None.
- textAngle - Variable in class nxopen.uf.UFDraw.TabnotCellParams
-
- textAngle - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- textAngle - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- textAngle - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- textArrowPlacement() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the text arrow placement.
- textArrowPlacement - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- textArrowPlacement - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- textAspectRatio - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- textAttr - Variable in class nxopen.uf.UFSfLegend.IndexAttr
-
- textAutoFit() - Method in interface nxopen.diagramming.TextStyleBuilder
-
Returns the text auto fit
License requirements: None.
- TextBasedElement - Interface in nxopen.motion
-
- TextBasedElementBuilder - Interface in nxopen.motion
-
- TextBasedElementBuilder.TypeChoices - Class in nxopen.motion
-
the text based element type - multiple values
- TextBasedElementCollection - Interface in nxopen.motion
-
Represents a collection of Text Based Element objects
To obtain an instance of this class, refer to
MotionManager
Created in NX12.0.0
- textBasedElements() - Method in interface nxopen.motion.MotionManager
-
- textBlock() - Method in interface nxopen.annotations.TextWithEditControlsBuilder
-
Returns the text with symbols builder
License requirements: None.
- TEXTBOX_AND_LEADERS - Static variable in class nxopen.preferences.SessionDrafting.AnnotationStyleType
-
- textBoxIndent() - Method in interface nxopen.diagramming.CannedAnnotationBuilder
-
Returns the indent value of the text box in the canned annotation.
- TextBoxMarginOption - Class in nxopen.cae.xyplot
-
Represents the margin position in a text box
- textBoxModifiable() - Method in interface nxopen.diagramming.CannedAnnotationBuilder
-
Returns the flag that indicates if the text box in the canned annotation is modifiable.
- textBoxShadowBox() - Method in interface nxopen.diagramming.CannedAnnotationBuilder
-
Returns the flag that indicates if the text box in the canned annotation has shadow box.
- textBoxStyle() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns the style of text box
License requirements: None.
- TextBoxStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the text box display style.
- TextBuilder - Interface in nxopen.features
-
- TextBuilder.FontStyleOptions - Class in nxopen.features
-
Font style options
- TextBuilder.OnFacePlacementMethodOptions - Class in nxopen.features
-
- TextBuilder.OrientationMethodOptions - Class in nxopen.features
-
- TextBuilder.ScriptOptions - Class in nxopen.features
-
Script or character set options
- TextBuilder.Types - Class in nxopen.features
-
Text placement type
- textCentered() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dimension text centered option
License requirements: None.
- textCFW() - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
Returns the text color font width
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- TextCfw - Class in nxopen.annotations
-
Specifies color, font, and width for text
- TextCfw() - Constructor for class nxopen.annotations.TextCfw
-
- TextCfw(int, int, LineWidth) - Constructor for class nxopen.annotations.TextCfw
-
Constructor for the TextCfw object.
- TextCfw() - Constructor for class nxopen.uf.UFDrf.TextCfw
-
- TextCfw(int, int, UFDrf.LineWidth) - Constructor for class nxopen.uf.UFDrf.TextCfw
-
- TEXTCOLOR - Static variable in class nxopen.cae.Post.MarkColor
-
- TEXTCOLOR - Static variable in class nxopen.cae.Post.StreamlineColor
-
- textColor() - Method in interface nxopen.cae.PostAnnotation
-
Returns the text color
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- textColor() - Method in interface nxopen.TextColorFontWidthBuilder
-
Returns the text color
License requirements: None.
- textColor - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- TextColorFontWidth - Interface in nxopen.blockstyler
-
Represents a Line Width block .
- textColorFontWidth() - Method in interface nxopen.diagramming.TextStyleBuilder
-
Returns the text color font width
License requirements: None.
- TextColorFontWidthBuilder - Interface in nxopen
-
- TextComponent - Interface in nxopen.annotations
-
Represents a single text in an annotation and can be queried for
information about that text.
- TextComponent.TextType - Class in nxopen.annotations
-
the text type.
- textDensity - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- textDepth() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Text Depth
License requirements: None.
- textDisplay() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the text display
License requirements: None.
- textDisplaySw - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- TextDocumentData - Interface in nxopen.openxml
-
Represents the text to be exported to the speific Open XML file.
- textExtension() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the extension to use for text format files
License requirements: None.
- textFont() - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
- textFont() - Method in interface nxopen.TextColorFontWidthBuilder
-
Returns the text font
License requirements: None.
- textFont() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the text orientation
License requirements: None.
- textFont - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- textFont - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- textFontMappingFile() - Method in interface nxopen.DxfdwgCreator
-
Returns the TextFontMappingFile command - definition file for text font mapping
License requirements: None.
- textFontMappingFile() - Method in interface nxopen.DxfdwgImporter
-
Returns the TextFontMappingFile command - definition file for text font mapping
License requirements: None.
- textFontStyle() - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
- textGapFactor() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the text gap factor
License requirements: None.
- textHeight() - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
Returns the text height
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- textHeight() - Method in interface nxopen.diagramming.TextStyleBuilder
-
Returns the height of the annotation
License requirements: None.
- textHeight - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- textInfo - Variable in class nxopen.uf.UFDrf.AskDraftAidTextInfoData
-
- textInfo - Variable in class nxopen.uf.UFDrf.DimInfo
-
- textInfo - Variable in class nxopen.uf.UFDrf.GdtSymbolInfo
-
- textInfo - Variable in class nxopen.uf.UFDrf.IdSymbolInfo
-
- textInfo - Variable in class nxopen.uf.UFDrf.LabelInfo
-
- TextItem - Interface in nxopen.report
-
Represents a text item.
- TextJustification - Class in nxopen.annotations
-
Represents the horizontal text justification
- textLocation() - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
Returns the text location of hole
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- textMode - Variable in class nxopen.uf.UFCgm.ExportOptions
-
- textOffset - Variable in class nxopen.annotations.NarrowDimensionData
-
- textOffset - Variable in class nxopen.uf.UFDrf.NarrowDimensionInfo
-
- textOrienationAngle() - Method in interface nxopen.annotations.DimensionPreferences
-
- textOrientation() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the text orientation
License requirements: None.
- textOrientation - Variable in class nxopen.annotations.NarrowDimensionData
-
- textOrientation() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
Returns the text orientation
License requirements: None.
- TextOrientation - Class in nxopen.annotations
-
Specifies the dimension text orientation
- TextOrientation - Class in nxopen.cae.xyplot
-
Represents the text orientation
- textOrientation() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the text orientation
License requirements: None.
- textOrientation - Variable in class nxopen.uf.UFDrf.NarrowDimensionInfo
-
- textOrientationAngle() - Method in interface nxopen.annotations.OrdinateDimensionPreferences
-
- textOrigin - Variable in class nxopen.uf.UFDrf.AssortpartText
-
- textOverLeaderGapFactor() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the character size factor that controls the gap between text and the leader
License requirements: None.
- textOverLeaderGapFactor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the character size factor that controls the gap between text and the leader
License requirements: None.
- textOverlined() - Method in interface nxopen.diagramming.TextStyleBuilder
-
Returns whether the text is overlined
License requirements: None.
- textOverStubFactor() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the character size factor which controls the distance between the stub and label text
when the text displays above the stub line
License requirements: None.
- textOverStubFactor - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- textOverStubSpaceFactor() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the text to stub spacing factor
License requirements: None.
- textPlacement() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the dimension text placement
License requirements: None.
- TextPlacement - Class in nxopen.annotations
-
Specifies the dimension text placement
- textPlacement() - Method in interface nxopen.drawings.ViewDetailLabelBuilder
-
Returns the text placement
License requirements: None.
- textPlaneRelativeToArrow() - Method in interface nxopen.annotations.CuttingPlaneSymbolBuilder
-
Returns the text plane relative to arrow
License requirements: None.
- textPosition() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the text position representing above or after stub
License requirements: None.
- textPosition() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dimension text position representing above or after stub
License requirements: None.
- TextPosition - Class in nxopen.annotations
-
Specifies the dimension text position
- textPosition - Variable in class nxopen.uf.UFDraw.TabnotCellEvalData
-
- textPositionHorizontal() - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
Returns the horizontal text position
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- textPositionVertical() - Method in interface nxopen.ame.GeneralAnnotationSettingsBuilder
-
Returns the vertical text position
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- textPreferencesOption() - Method in interface nxopen.annotations.CustomSymbolData
-
- TextPreferencesOption - Class in nxopen.annotations
-
Specifies the custom symbol text preferences option.
- texts() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder
-
Returns the texts
License requirements: None.
- textScale() - Method in interface nxopen.markup.EditObjectDisplayBuilder
-
- textSize() - Method in interface nxopen.linedesigner.HoleFeatureBuilder
-
Returns the text size
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- textSizeFixed() - Method in interface nxopen.preferences.SessionSketch
-
Returns the setting that controls whether or not dimension text size is fixed.
- textSizeFixed() - Method in interface nxopen.preferences.SketchPreferences
-
Returns the setting that controls whether or not the dimension text size should be fixed.
- textSlant - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- textString() - Method in interface nxopen.features.TextBuilder
-
Returns the string to be rendered
License requirements: None.
- textStyle() - Method in interface nxopen.cae.xyplot.ProbingStyle
-
Returns the text display style.
- textStyle() - Method in interface nxopen.TextColorFontWidthBuilder
-
Returns the text style
License requirements: None.
- textStyleBuilder() - Method in interface nxopen.diagramming.AnnotationBuilder
-
Returns the text style of the annotation.
- TextStyleBuilder - Interface in nxopen.diagramming
-
Represents a TextStyleBuilder.
- textStyleBuilder() - Method in interface nxopen.pid.OffSheetConnectorBuilder
-
Returns the text style of the OSC.
- textStyleBuilder() - Method in interface nxopen.pid.PreferencesOffSheetConnectorBuilder
-
Returns the text style of the OSC.
- TextStyleBuilder.TextAlignmentType - Class in nxopen.diagramming
-
- TextStyleBuilder.TextAutoFitType - Class in nxopen.diagramming
-
- textStyleConnectionBuilder() - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
Returns the connection text style of the Annotation.
- textStyleNoteBuilder() - Method in interface nxopen.pid.PreferencesAnnotationBuilder
-
Returns the note text style of the Annotation.
- TextStyleSetting - Interface in nxopen.cae.xyplot
-
Represents the text display style.
- textSymbolDisplayFlag() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the true/false flag based on whether the text symbol of the BC is
displayed in the graphics window
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- textToGapFactor - Variable in class nxopen.uf.UFDraw.ViewLabelParms
-
- textToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool text toggle
License requirements: None.
- textToLineDistance() - Method in interface nxopen.annotations.LineAndArrowPreferences
-
Returns the text to line distance
License requirements: None.
- textToLineDistance() - Method in interface nxopen.annotations.LineArrowStyleBuilder
-
Returns the distance from the text to the dimension line(stub) or arc
License requirements: None.
- textToLineDistance - Variable in class nxopen.uf.UFDrf.LineArrowPreferences
-
- textType() - Method in interface nxopen.annotations.CustomSymbolTextData
-
- textType() - Method in interface nxopen.annotations.MasterSymbolListItemBuilder
-
Returns the text type
License requirements: None.
- textType() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the text enum
License requirements: None.
- textType() - Method in interface nxopen.annotations.SearchCriteriaPMINotesBuilder
-
Returns the text enum
License requirements: None.
- TextType - Class in nxopen.annotations
-
Specifies the custom symbol text type
- TextType - Class in nxopen.cae.xyplot
-
Represents the label text type
- textType() - Method in interface nxopen.diagramming.AnnotationBuilder
-
Returns the text type.
- textType - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- textType - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo
-
- textType - Variable in class nxopen.uf.UFDrf.GetTextSubstringData
-
- TEXTUAL - Static variable in class nxopen.NXObject.DateAndTimeFormat
-
28-Apr-2004 22:06:15
- textUnderlined() - Method in interface nxopen.diagramming.TextStyleBuilder
-
Returns whether the text is underlined
License requirements: None.
- TEXTURE_IMAGE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TEXTURE_IMAGE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TEXTURE_SPACE - Static variable in class nxopen.display.IrayPlusMaterialEditorBuilder.LayerType
-
Global texture space layer
- texturedToggle() - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
Returns the textured toggle
License requirements: studio_render ("UG STUDIO RENDER")
.
- textureSpaceEnum() - Method in interface nxopen.display.IrayPlusSimpleMaterialEditorBuilder
-
Returns the texture space enum
License requirements: studio_render ("UG STUDIO RENDER")
.
- TextureSpaceInfo() - Constructor for class nxopen.uf.UFDisp.TextureSpaceInfo
-
- TextureSpaceInfo(UFDisp.TextureSpaceType, double, double, double, double[], double[], double[], double[], int) - Constructor for class nxopen.uf.UFDisp.TextureSpaceInfo
-
- textureSpaceShaderType() - Method in interface nxopen.display.CgfxMattexBuilder
-
- textValue() - Method in interface nxopen.annotations.BusinessModifier
-
Returns the value
License requirements: None.
- textValue() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool text value
License requirements: None.
- textWidth() - Method in interface nxopen.TextColorFontWidthBuilder
-
Returns the text width
License requirements: None.
- TextWithEditControlsBuilder - Interface in nxopen.annotations
-
Represents a
TextWithEditControlsBuilder
which collects
internationalized text strings from the user for processing on an annotation object.
- TextWithSymbolsBuilder - Interface in nxopen.annotations
-
Represents a
TextWithSymbolsBuilder
which collects
internationalized text strings from the user for processing on an annotation object.
- TextWithSymbolsBuilder.SymbolAlignmentType - Class in nxopen.annotations
-
Enum for the symbol alignment
- TextWithSymbolsBuilder.SymbolPreferencesType - Class in nxopen.annotations
-
Enum for the symbol preferences
- TextWithSymbolsBuilder.SymbolSizingMethod - Class in nxopen.annotations
-
sizing method for embedded user-defined symbols
- tfeatureSet() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the feature set tag.
- tfeatureSet() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the feature set tag.
- tgPhysicsObject - Variable in class nxopen.mechatronics.ExpressionBlockBuilder.Slot
-
Connnected Physics Object
- tgPhysicsObject - Variable in class nxopen.mechatronics.SignalBuilder.Signal
-
Physics Object
- tgShowA() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the A attribute
License requirements: None.
- tgShowB() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the B attribute
License requirements: None.
- tgtPierceOption() - Method in interface nxopen.features.ShellBuilder
-
Returns the option to process tangent remove faces for the Shell operation.
- THAI - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Thai character set
- THERMAL - Static variable in class nxopen.cae.Post.Spectrum
-
- THERMAL - Static variable in class nxopen.cae.SimResultReference.Type
-
thermal result
- THERMAL - Static variable in class nxopen.cae.SolidPropertyCheckBuilder.CoupledSolutionOutput
-
thermal results
- THERMAL_CONDUCTANCE - Static variable in class nxopen.cae.Result.Quantity
-
- THERMAL_CONDUCTIVITY - Static variable in class nxopen.cae.Result.Quantity
-
- THERMAL_CONDUCTIVITY - Static variable in class nxopen.cae.XyFunctionMeasure
-
thermal conductivity
- THERMAL_CONDUCTIVITY_BTU_HR_FT_DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: Btu per hour per foot per Delta Fahrenheit
- THERMAL_CONDUCTIVITY_BTU_HR_IN_DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: Btu per hour per inch per Delta Fahrenheit
- THERMAL_CONDUCTIVITY_BTU_SEC_FT_DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: Btu per second per feet per Delta Fahrenheit
- THERMAL_CONDUCTIVITY_BTU_SEC_IN_DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: Btu per second per inch per Delta Fahrenheit
- THERMAL_CONDUCTIVITY_LBFIN_SEC_IN_DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: pound force inch per second per inch per Delta Fahrenheit
- THERMAL_CONDUCTIVITY_MICROWATT_MM_DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: microWatts per millimeter per Delta Centrigade
- THERMAL_CONDUCTIVITY_MWATT_MM_DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: milliWatts per millimeter per Delta Celsius
- THERMAL_CONDUCTIVITY_MWATT_MM_DEGK - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: milliWatts per millimeter per Delta Kelvin
- THERMAL_CONDUCTIVITY_WATT_CM_DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: Watts per centimeter per Delta Celsius
- THERMAL_CONDUCTIVITY_WATT_MDEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: Watts per meter per Delta Celsius
- THERMAL_CONDUCTIVITY_WATT_MDEGK - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: Watts per meter per Delta Kelvin
- THERMAL_CONDUCTIVITY_WATT_MM_DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Conductivity unit: Watts per millimeter per Delta Centrigade
- THERMAL_ELEM_RESULTANT_STRAIN_BEAM - Static variable in class nxopen.cae.Result.Quantity
-
- THERMAL_ELEM_RESULTANT_STRAIN_SHELL - Static variable in class nxopen.cae.Result.Quantity
-
- THERMAL_ELEM_RESULTANT_STRAIN_SPRING_DASHPOT - Static variable in class nxopen.cae.Result.Quantity
-
- THERMAL_ENERGY - Static variable in class nxopen.cae.Result.Quantity
-
- THERMAL_EXPANSION_COEFFICIENT - Static variable in class nxopen.cae.XyFunctionMeasure
-
Thermal Expansion Coefficient
- THERMAL_EXPANSION_COEFFICIENT_DEGC - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Expansion Coefficient unit: Expansion coefficient per Delta Celsius
- THERMAL_EXPANSION_COEFFICIENT_DEGF - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Expansion Coefficient unit: Expansion coefficient per Delta Fahrenheit
- THERMAL_EXPANSION_COEFFICIENT_DEGK - Static variable in class nxopen.cae.XyFunctionUnit
-
Thermal Expansion Coefficient unit: Expansion coefficient per Delta Kelvin
- THERMAL_RESISTANCE - Static variable in class nxopen.cae.Result.Quantity
-
- THERMAL_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- THERMAL_STRAIN_AT_ELEMENT_INTEGRATION_POINT - Static variable in class nxopen.cae.Result.Quantity
-
- THERMAL_STRAIN_VON_MISES - Static variable in class nxopen.cae.Result.Quantity
-
- thermalenergyUnit - Variable in class nxopen.cae.Result.ResultBasicUnit
-
- theta() - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
Returns the theta
License requirements: None.
- theta - Variable in class nxopen.uf.UFModeling.AskChamferParmsData
-
- THICK - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
thick
- THICK - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Thick
- THICK - Static variable in class nxopen.annotations.DraftingNoteBuilder.ThicknessTypes
-
Thick thickness type
- THICK - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Thick
- THICK - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Thick
- THICK - Static variable in class nxopen.annotations.LineWidth
-
- THICK - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
thick
- THICK - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Thick
- THICK - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
Thick
- THICK - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
-
Thick
- THICK - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
Thick
- THICK - Static variable in class nxopen.cae.Post.StreamlineLineWeight
-
- THICK - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- THICK - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- THICK - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Thick
- THICK - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Deprecated.
Thick
- THICK - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Thick
- THICK - Static variable in class nxopen.features.StepBuilder.StepNewTypes
-
Adds a step to thick a face.
- THICK - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
Thick width
- THICK - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
- THICK - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.LineThicknessType
-
Thick.
- THICK - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Thick
- THICK - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- THICK - Static variable in class nxopen.preferences.Width
-
Thick
- THICK - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICK - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- THICK_CIRCLE - Static variable in class nxopen.cae.MarkerType0d
-
- THICK_ENDS_ARROWS_AWAYFROM_LINE - Static variable in class nxopen.drawings.ViewSectionLineBuilder.DisplayType
-
- THICK_ENDS_ARROWSTOWARDS_LINE - Static variable in class nxopen.drawings.ViewSectionLineBuilder.DisplayType
-
- THICK_WIDTH - Static variable in class nxopen.preferences.PartObject.WidthType
-
Thick Width
- THICKEN - Static variable in class nxopen.die.MachineReliefBuilder.Types
-
Add casting material to thicken an existing wall.
- Thicken - Interface in nxopen.features
-
Represents a thicken feature.
- ThickenBuilder - Interface in nxopen.features
-
Represents a builder for a
Thicken
feature.
- thickenDirection() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
Returns the indication if the thicken direction of the insulation should be the same as the sewn face normal.
- thickenDirection() - Method in interface nxopen.routing.PlatformCreatorBuilder
-
Returns the thicken direction
License requirements: routing_platform ("Routing Platform")
.
- ThickenMeshBuilder - Interface in nxopen.cae
-
- thickenOption() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the thicken option
License requirements: None.
- thickenOption() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the thicken option.
- THICKEST - Static variable in class nxopen.formboard.FormboardLayoutBuilder.MainRunType
-
Path of longest wire contained within the
thickest bundle.
- THICKNESS - Static variable in class nxopen.annotations.SearchCriteriaDimensionBuilder.DimensionTypes
-
Thickness
- thickness() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the thickness of sheet metal model.
- thickness() - Method in interface nxopen.cae.LaminatePly
-
Returns the ply thickness, in part units (inches or millimeters)
License requirements: None.
- thickness() - Method in interface nxopen.cae.optimization.TBSTopologyRestrictAreaBuilder
-
Returns the maximum thickness of the structure
License requirements: None.
- THICKNESS - Static variable in class nxopen.cae.Result.Quantity
-
- THICKNESS - Static variable in class nxopen.cam.CutParametersIpwTypes
-
Thickness
- thickness() - Method in interface nxopen.die.CastReliefBuilder
-
Returns the thickness value of the support casting surrounding the relief
License requirements: None.
- thickness() - Method in interface nxopen.die.FlangeSteelRibChildBuilder
-
Returns the thickness of the Flange Steel Rib
License requirements: ug_die_design ("Die Design")
.
- thickness() - Method in interface nxopen.die.FlangeSteelRibParentBuilder
-
Returns the thickness of the Flange Steel Ribs
License requirements: ug_die_design ("Die Design")
.
- thickness() - Method in interface nxopen.die.RibChildBuilder
-
Returns the thickness of the die rib.
- thickness() - Method in interface nxopen.die.RibParentBuilder
-
Returns the thickness of die ribs.
- thickness() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Returns the thickness
License requirements: None.
- thickness() - Method in interface nxopen.die.TrimLineDevelopmentBuilder
-
Returns the material thickness.
- thickness() - Method in interface nxopen.features.AdaptiveShellBuilder
-
Returns the thickness
License requirements: None.
- thickness() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the thickness
License requirements: None.
- thickness() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the thickness
License requirements: None.
- thickness() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the emboss thickness
License requirements: None.
- THICKNESS - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.PairingStrategyType
-
Find all faces within search distance
- thickness() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the thickness.
- thickness() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the thickness.
- thickness() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the thickness
License requirements: None.
- THICKNESS - Static variable in class nxopen.features.sheetmetal.SheetmetalFaceType
-
- thickness() - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder
-
Returns the thickness
License requirements: None.
- thickness() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the thickness expression to use when the option to infer thickness is turned off.
- thickness() - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Returns the thickness of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- thickness() - Method in interface nxopen.features.ShellFaceBuilder
-
Returns the thickness
License requirements: None.
- thickness() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder
-
Returns the thickness of the bracket
License requirements: None.
- thickness() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the thickness.
- thickness() - Method in interface nxopen.features.shipdesign.RoomPanelBuilder
-
Returns the thickness
License requirements: None.
- thickness() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the expression defining the value of the thickness of the template.
- thickness() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
- thickness() - Method in interface nxopen.features.shipdesign.SteelInsulationBuilder
-
Returns the expression containing the insulation material thickness value.
- thickness() - Method in interface nxopen.features.vehicledesign.ReflectionDataBuilder
-
Returns the thickness of the reflection objects
License requirements: None.
- thickness() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the material thickness
License requirements: die_engineering ("DIE ENGINEERING")
.
- thickness - Variable in class nxopen.uf.UFModl.FlangeData
-
- thickness - Variable in class nxopen.uf.UFModl.SolidPunchData
-
- thickness - Variable in class nxopen.uf.UFModlFeatures.AskHollowData
-
- thickness - Variable in class nxopen.uf.UFSf.MidsrfUserParms
-
- thickness - Variable in class nxopen.uf.UFSmd.AskBendLineData
-
- thickness - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- thickness - Variable in class nxopen.weld.JointExitBuilder.EdgePrepValuesData
-
The thickness depth for this position.
- thickness() - Method in interface nxopen.weld.SurfaceWeldBuilder
-
Returns the expression containing the value of the thickness of the surface weld.
- THICKNESS01 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 01
- THICKNESS02 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 02
- THICKNESS03 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 03
- THICKNESS04 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 04
- THICKNESS05 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 05
- THICKNESS06 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 06
- THICKNESS07 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 07
- THICKNESS09 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 09
- THICKNESS11 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 11
- THICKNESS12 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: 12
- THICKNESS_CUT - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.CutTypeOptions
-
- THICKNESS_EIGHT - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Width Eight
- THICKNESS_EIGHT - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Width Eight
- THICKNESS_EIGHT - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Width Eight
- THICKNESS_EIGHT - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICKNESS_FIVE - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Width Five
- THICKNESS_FIVE - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Width Five
- THICKNESS_FIVE - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Width Five
- THICKNESS_FIVE - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICKNESS_FOUR - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Width Four
- THICKNESS_FOUR - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Width Four
- THICKNESS_FOUR - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Width Four
- THICKNESS_FOUR - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICKNESS_GAP_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- THICKNESS_NINE - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Width Nine
- THICKNESS_NINE - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Width Nine
- THICKNESS_NINE - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Width Nine
- THICKNESS_NINE - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICKNESS_ONE - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Width One
- THICKNESS_ONE - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Width One
- THICKNESS_ONE - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Width One
- THICKNESS_ONE - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICKNESS_SEVEN - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Width Seven
- THICKNESS_SEVEN - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Width Seven
- THICKNESS_SEVEN - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Width Seven
- THICKNESS_SEVEN - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICKNESS_SIX - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Width Six
- THICKNESS_SIX - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Width Six
- THICKNESS_SIX - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Width Six
- THICKNESS_SIX - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICKNESS_T1 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: T1
- THICKNESS_T2 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: T2
- THICKNESS_T3 - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: T3
- THICKNESS_THREE - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Width Three
- THICKNESS_THREE - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Width Three
- THICKNESS_THREE - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Width Three
- THICKNESS_THREE - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICKNESS_TWO - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Width Two
- THICKNESS_TWO - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Width Two
- THICKNESS_TWO - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Width Two
- THICKNESS_TWO - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THICKNESS_USER_DEFINED - Static variable in class nxopen.cam.TurnToolBuilder.ThicknessTypes
-
Thickness: User defined
- ThicknessBuilder - Interface in nxopen.cae
-
- thicknessBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the thickness builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- ThicknessBuilder.ElementThicknessData - Class in nxopen.cae
-
- ThicknessBuilder.EntityType - Class in nxopen.cae
-
Option to Info on Node or Element
- ThicknessBuilder.NodeThicknessData - Class in nxopen.cae
-
- thicknessChainEnabled() - Method in interface nxopen.features.FaceRecognitionBuilder
-
Returns a value that indicates whether thickness chain relation recognition is enabled
License requirements: None.
- ThicknessDimensionBuilder - Interface in nxopen.annotations
-
- thicknessDimensionType() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the thickness dimension type
License requirements: None.
- thicknessDimensionType() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the thickness dimension type
License requirements: None.
- thicknessDirection() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the thickness direction used to define the direction of product thickness at the specific point in trimline.
- thicknessDirection() - Method in interface nxopen.features.sheetmetal.FlexibleCableBuilder
-
Returns the thickness direction.
- thicknessDirection() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the thickness direction.
- thicknessDirection() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the thickness direction builder, used to specify the thickness direction from the mold face.
- thicknessDirection() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the option whether to change thickness direction.
- thicknessDirection() - Method in interface nxopen.features.shipdesign.ThicknessDirectionBuilder
-
Returns the direction in which to apply the thickness.
- ThicknessDirectionBuilder - Interface in nxopen.features.shipdesign
-
This class allows you to define the thickness direction for plate system features in Ship Basic Design and
and for grid planes in Ship Concept Design.
- ThicknessDirectionBuilder.ThicknessDirectionType - Class in nxopen.features.shipdesign
-
Settings used to indicate the direction of thickness from the mold face or grid plane.
- thicknessDirectionOnReference() - Method in interface nxopen.features.shipdesign.ThicknessDirectionBuilder
-
Returns the direction in which to apply the thickness when the mold face or grid plane is located on a midship reference.
- thicknessDirectionOption() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the thickness direction option.
- thicknessExpression() - Method in interface nxopen.cae.LaminatePly
-
Returns the ply thickness expression
License requirements: None.
- thicknessExpression() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the thickness expression of the shell element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- thicknessMode() - Method in interface nxopen.cam.IpwContainmentCurvesBuilder
-
Returns the thickness mode
License requirements: None.
- thicknessOffset() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the thickness offset
License requirements: None.
- thicknessOffset() - Method in interface nxopen.features.AeroRibBuilder
-
Returns the thicknessOffset
License requirements: None.
- thicknessOption() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the thickness option.
- thicknessOption - Variable in class nxopen.uf.UFModl.SolidPunchData
-
- thicknessOverride() - Method in interface nxopen.cae.LaminatePlyMaxThicknessVarBuilder
-
Returns the layup thickness variation limit override option
License requirements: None.
- ThicknessPlotContours - Interface in nxopen.cae
-
- ThicknessPlotContoursBuilder - Interface in nxopen.cae
-
- thicknessRatio() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the dt ratio for ignoring small features
License requirements: None.
- thicknessSide() - Method in interface nxopen.features.sheetmetal.ContourFlangeBuilder
-
Returns the thickness side of contour flange
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- thicknessSide() - Method in interface nxopen.features.sheetmetal.LoftedFlangeBuilder
-
Returns the thickness side of base lofted flange.
- thicknessSide() - Method in interface nxopen.features.sheetmetal.TabBuilder
-
Returns the sweep direction flag of tab
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- thicknessSourceOption() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the thickness source option.
- thicknessState() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the thickness state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- thicknessStr() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the thickness in string format.
- thicknessType() - Method in interface nxopen.cam.TurnToolBuilder
-
Returns the thickness type
License requirements: None.
- thicknessType() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the thickness type
License requirements: die_engineering ("DIE ENGINEERING")
.
- thicknessType - Variable in class nxopen.uf.UFSmd.GenPrefs
-
- thicknessValue() - Method in interface nxopen.cae.ThickenMeshBuilder
-
Returns the thickness value
License requirements: None.
- thicknessValue() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the thickness value when pairing strategy is set to Thickness
License requirements: None.
- thicknessValue() - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder
-
Returns the thickness value
License requirements: None.
- thicknessValue() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the thickness value.
- thicknessVariationDownLimit() - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
Returns the global maximum allowed relative thickness reduction variation, in percentage
License requirements: None.
- thicknessVariationDownLimit() - Method in interface nxopen.cae.LaminatePlyMaxThicknessVarBuilder
-
Returns the maximum allowed relative thickness reduction variation, in percentage, for the ply
License requirements: None.
- thicknessVariationUpLimit() - Method in interface nxopen.cae.LaminateFillSetupBuilder
-
Returns the global maximum allowed relative thickness increase variation, in percentage
License requirements: None.
- thicknessVariationUpLimit() - Method in interface nxopen.cae.LaminatePlyMaxThicknessVarBuilder
-
Returns the maximum allowed relative thickness increase variation, in percentage, for the ply
License requirements: None.
- thickReflLines - Variable in class nxopen.uf.UFDisp.SrfanlData
-
- thickShellSw - Variable in class nxopen.uf.UFSf.MeshVisuals
-
- thickWidth() - Method in interface nxopen.PrintBuilder
-
Returns the thick width scale factor.
- THIGH_CLEARANCE - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of thigh_clearance
- thighLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the thigh length.
- THIN - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
thin
- THIN - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Thin
- THIN - Static variable in class nxopen.annotations.EditSymbolDisplayBuilder.WidthTypes
-
Thin
- THIN - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Thin
- THIN - Static variable in class nxopen.annotations.LineWidth
-
- THIN - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
thin
- THIN - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Thin
- THIN - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
Thin
- THIN - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
-
Thin
- THIN - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
Thin
- THIN - Static variable in class nxopen.cae.Post.StreamlineLineWeight
-
- THIN - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- THIN - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- THIN - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Thin
- THIN - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Deprecated.
Thin
- THIN - Static variable in class nxopen.drawings.SectionLineStyleBuilder.WidthStyle
-
Deprecated.
Thin
- THIN - Static variable in class nxopen.features.StepBuilder.StepNewTypes
-
Adds a step to thin a face.
- THIN - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
Thin width
- THIN - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
- THIN - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.LineThicknessType
-
Thin.
- THIN - Static variable in class nxopen.preferences.PartDrafting.WidthType
-
Thin
- THIN - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- THIN - Static variable in class nxopen.preferences.Width
-
Thin
- THIN - Static variable in class nxopen.uf.UFDrf.LineWidth
-
- THIN - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- THIN_WIDTH - Static variable in class nxopen.preferences.PartObject.WidthType
-
Thin Width
- thinFacets() - Method in interface nxopen.facet.CleanupFacetBodyBuilder
-
Returns the option to identify or repair facets with with one long edge and two edges with more or the less the same length and a ratio of length to width exceeding a specified value
License requirements: None.
- THINNER_PLATE - Static variable in class nxopen.features.shipdesign.PlateChamferBuilder.OffsetMethod
-
Use the thickness of the thinner plate to define ramp depth
- thinWidth() - Method in interface nxopen.PrintBuilder
-
Returns the thin width scale factor.
- THIRD - Static variable in class nxopen.drawings.DrawingSheetBuilder.SheetProjectionAngle
-
third angle projection
- THIRD - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Wad
-
Third wrap around distance line
- THIRD - Static variable in class nxopen.layout2d.ConvertLayoutToSheetBuilder.SheetProjectionAngleType
-
third angle projection
- THIRD - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextFontType
-
- THIRD - Static variable in class nxopen.tooling.BurringInsertBuilder.BurringPunchTypes
-
use third type
- THIRD - Static variable in class nxopen.tooling.HoleDatumSymbolBuilder.SymbolType
-
- THIRD - Static variable in class nxopen.weld.WeldFacesetIndex
-
third face set
- THIRD - Static variable in class nxopen.weld.WeldGroupIdColor
-
Third Group Id Color Index
- THIRD_ANGLE - Static variable in class nxopen.drawings.DrawingSheet.ProjectionAngleType
-
- THIRD_ANGLE_PROJECTION - Static variable in class nxopen.tooling.CompDrawingBuilder.ProjectionType
-
third angle projection
- THIRD_ANGLE_PROJECTION - Static variable in class nxopen.uf.UFDraw.ProjectionAngle
-
- THIRD_AXIS - Static variable in class nxopen.cae.PostGraphAlongPathBuilder.CoordinateSysAxis
-
- THIRD_POINT - Static variable in class nxopen.features.DatumPlaneBuilder.UseArcLength
-
Only third point uses arclength
- thirdAxisJoint() - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder
-
Returns the third axis joint.
- thirdClearance() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the third clearance
License requirements: None.
- thirdCut() - Method in interface nxopen.cam.DmStreamlineCutStep
-
Returns the third cut which defines point number for the third cut and is available when cut pattern is follow
License requirements: None.
- thirdFaceEndParameter() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the end paramater or 'to' range for the third face with a three-face blend
License requirements: None.
- thirdFaceStartParameter() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the start parameter or 'from' range for the third face with a three-face blend
License requirements: None.
- thirdJoint() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the selected third joint
License requirements: None.
- thirdJointAxisType() - Method in interface nxopen.mechatronics.ThreeJointCouplerBuilder
-
Returns the axis joint type.
- thirdMargin() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the third margin tag
License requirements: None.
- thirdObject() - Method in interface nxopen.features.shipdesign.StandardPartItemBuilder
-
Returns the third selected object.
- thirdScaleExpression() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the third scale expression
License requirements: None.
- thirdType() - Method in interface nxopen.motion.GeneralCouplerBuilder
-
Returns the third joint movement type
License requirements: None.
- THIRTEENTH - Static variable in class nxopen.weld.WeldGroupIdColor
-
Thirteenth Group Id Color Index
- THIRTY_TWO - Static variable in class nxopen.annotations.FractionDenominatorFormat
-
- THIRTY_TWO - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions
-
32 reflection line.
- THOUSAND - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest thousand
- THOUSANDTH - Static variable in class nxopen.cam.RoundPointBuilder.Output
-
nearest thousandth
- THREAD - Static variable in class nxopen.cam.Tool.Types
-
Threading tool
- THREAD - Static variable in class nxopen.cam.TurnThreadEngageRetractBuilder.MoveTypes
-
Thread
- THREAD_ACME - Static variable in class nxopen.cam.Tool.Subtypes
-
Threading tool-ACME
- THREAD_AT_LEAD_IN - Static variable in class nxopen.cam.TabPointDataBuilder.TabThreadMethodType
-
Thread at Lead-in
- THREAD_BUTRESS - Static variable in class nxopen.cam.Tool.Subtypes
-
Threading tool-Butress
- THREAD_DEPTH - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- THREAD_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType
-
- THREAD_PASSES - Static variable in class nxopen.cam.NcmTurnThreadBuilder.LocalReturnMainModes
-
Thread Passes
- THREAD_SECTION_EDGE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Specifies Thread Section Edge Curve
- THREAD_SECTION_EDGE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType
-
- THREAD_SILHOUETTE_CURVE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Specifies Thread Silhouette Curve
- THREAD_SILHOUETTE_CURVE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType
-
- THREAD_SIZE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Parametertype
-
- THREAD_STANDARD - Static variable in class nxopen.cam.Tool.Subtypes
-
Threading tool-Standard
- THREAD_TOLERANCE_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- THREAD_TRAPEZOIDAL - Static variable in class nxopen.cam.Tool.Subtypes
-
Threading tool-Trapezoidal
- threadAngleBuilder() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the thread angle
License requirements: None.
- threadClass - Variable in class nxopen.uf.UFGdt.ThreadData
-
- ThreadCutParameters - Interface in nxopen.cam
-
- ThreadData() - Constructor for class nxopen.uf.UFGdt.ThreadData
-
- ThreadData(int, String, int, String, int) - Constructor for class nxopen.uf.UFGdt.ThreadData
-
- threadDepth() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the thread depth - this is applicable for threaded hole
License requirements: None.
- threadDepth() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the thread depth
License requirements: None.
- threadDepthType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the threadDepth setting
License requirements: None.
- threadDepthValue() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the threadDepth value
License requirements: None.
- THREADED - Static variable in class nxopen.geometricutilities.EndHoleData.FormOptions
-
Threaded hole
- THREADED_BOSS - Static variable in class nxopen.cam.HoleBossGeom.HoleBossTypes
-
Type: Threaded Boss
- THREADED_HOLE - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.Featuretype
-
- THREADED_HOLE - Static variable in class nxopen.cam.HoleBossGeom.HoleBossTypes
-
Type: Threaded Hole
- THREADED_HOLE - Static variable in class nxopen.features.HolePackageBuilder.Types
-
Threaded hole
- THREADED_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
- threadedBossList() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the threaded boss list
License requirements: None.
- ThreadedBossSet - Interface in nxopen.cam
-
Represents a thread boss Geometry builder
To create a new instance of this class, use
HoleBossGeom.createThreadedBossBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, double, double, double, java.lang.String, double, int, nxopen.cam.HoleBossGeom.FormTypes, java.lang.String)
Created in NX7.5.0
- ThreadedBossSetList - Interface in nxopen.cam
-
Represents a list of objects.
- threadedEndChamferAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded end chamfer angle - this is applicable for threaded hole type
License requirements: None.
- threadedEndChamferAngle() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded end chamfer angle
License requirements: None.
- threadedEndChamferDiameter() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded end chamfer offset - this is applicable for threaded hole type
License requirements: None.
- threadedEndChamferDiameter() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded end chamfer offset
License requirements: None.
- threadedEndChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded end chamfer enabled - this is applicable for threaded hole type
License requirements: None.
- threadedEndChamferEnabled() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded end chamfer enabled
License requirements: None.
- threadedHoleDepth() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the hole depth - this is applicable for threaded hole
License requirements: None.
- threadedHoleList() - Method in interface nxopen.cam.HoleBossGeom
-
Returns the threaded hole list
License requirements: None.
- threadedHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the threaded holes
License requirements: None.
- ThreadedHoleSet - Interface in nxopen.cam
-
Represents a Cut Area Geometry builder
To create a new instance of this class, use
HoleBossGeom.createThreadedHoleBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, double, double, double, java.lang.String, java.lang.String, double, int, nxopen.cam.HoleBossGeom.FormTypes, java.lang.String, java.lang.String, int)
Created in NX7.5.0
- ThreadedHoleSetList - Interface in nxopen.cam
-
Represents a list of objects.
- threadedReliefAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the relief angle - this is applicable for threaded hole type
License requirements: None.
- threadedReliefAngle() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the relief angle - this is applicable for threaded hole type
License requirements: None.
- threadedReliefChamferAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded relief chamfer angle - this is applicable for threaded hole type
License requirements: None.
- threadedReliefChamferAngle() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded relief chamfer angle - this is applicable for threaded hole type
License requirements: None.
- threadedReliefChamferOffset() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded relief chamfer offset - this is applicable for threaded hole type
License requirements: None.
- threadedReliefChamferOffset() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded relief chamfer offset - this is applicable for threaded hole type
License requirements: None.
- threadedReliefDepth() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded relief depth - this is applicable for threaded hole type
License requirements: None.
- threadedReliefDepth() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded relief depth - this is applicable for threaded hole type
License requirements: None.
- threadedReliefDiameter() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the relief diameter - this is applicable for threaded hole type
License requirements: None.
- threadedReliefDiameter() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the relief diameter - this is applicable for threaded hole type
License requirements: None.
- threadedReliefEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded relief enabled - this is applicable for threaded hole type
License requirements: None.
- threadedReliefEnabled() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded relief enabled - this is applicable for threaded hole type
License requirements: None.
- threadedStartChamferAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded start chamfer angle - this is applicable for threaded hole type
License requirements: None.
- threadedStartChamferAngle() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded start chamfer angle
License requirements: None.
- threadedStartChamferDiameter() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded start chamfer offset - this is applicable for threaded hole type
License requirements: None.
- threadedStartChamferDiameter() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded start chamfer offset
License requirements: None.
- threadedStartChamferEnabled() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the threaded start chamfer enabled - this is applicable for threaded hole type
License requirements: None.
- threadedStartChamferEnabled() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the threaded start chamfer enabled
License requirements: None.
- threadedTipAngle() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the tip angle - this is applicable for threaded hole
License requirements: None.
- ThreadFeatureGeometry - Interface in nxopen.cam.fbm
-
Represents a feature geometry builder
This is an abstract class and cannot be instantiated.
- ThreadFeatureGeometry.Form - Class in nxopen.cam.fbm
-
Thread form standards .
- ThreadFeatureGeometry.Rotation - Class in nxopen.cam.fbm
-
the rotation types .
- ThreadFeatureGeometry.ThreadDataSource - Class in nxopen.cam.fbm
-
thread data source types .
- threadHole() - Method in interface nxopen.tooling.ReusablePocketBuilder
-
Returns the flag specifying whether thread hole is used.
- threadHolePoint() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Thread Hole Point
License requirements: cam_base ("CAM BASE")
.
- threadHolePoint() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the thread hole point
License requirements: cam_base ("CAM BASE")
.
- threadHolePointBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the thread_hole_point Builder
License requirements: cam_base ("CAM BASE")
.
- threadHolePointStatus() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Thread Hole Point Status
License requirements: cam_base ("CAM BASE")
.
- threadHolePointToolAxis() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Thread Hole Point Tool Axis
License requirements: cam_base ("CAM BASE")
.
- threadLength() - Method in interface nxopen.cae.BoltBuilder
-
Returns the thread length
License requirements: None.
- threadLengthOption() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the thread length option - this is applicable for threaded hole
License requirements: None.
- threadLengthOption() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the thread length option
License requirements: None.
- ThreadMilling - Interface in nxopen.cam
-
Represents a Thread Milling Operation
To create or edit an instance of this class, use
ThreadMillingBuilder
Created in NX7.5.0
- ThreadMillingBuilder - Interface in nxopen.cam
-
- ThreadMillingCutParameters - Interface in nxopen.cam
-
Represents a ThreadMillingCutParameters Builder .
- ThreadMillingCutParameters.CutDirectionTypes - Class in nxopen.cam
-
cut direction options .
- threadPerUnit() - Method in interface nxopen.cam.PitchSetting
-
Returns the thread per mm
License requirements: None.
- threadRotation() - Method in interface nxopen.cam.fbm.ThreadFeatureGeometry
-
Returns the thread rotation
License requirements: None.
- threadRotation() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the thread rotation - this is applicable for threaded hole
License requirements: None.
- threadRotation() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the thread rotation
License requirements: None.
- threads() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to Threads .
- threads() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to Threads .
- THREADS_PER_UNIT - Static variable in class nxopen.cam.PitchSetting.OptionTypes
-
Threads per mm or inch
- THREADS_PER_UNIT - Static variable in class nxopen.cam.PitchSetting.OutputUnitTypes
-
Threads per mm
- threadSize() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the thread size - this is applicable for threaded hole
License requirements: None.
- threadSize() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the thread size
License requirements: None.
- threadSizeText() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the threadSize text
License requirements: None.
- threadSizeTextType() - Method in interface nxopen.annotations.SearchCriteriaCalloutBuilder
-
Returns the threadSize setting
License requirements: None.
- threadsStandardOptionData() - Method in interface nxopen.drawings.ThreadsViewStyle
-
Returns the threads standard option
License requirements: None.
- threadsStandardOptionData() - Method in interface nxopen.preferences.ThreadsViewPreferences
-
Returns the threads standard option.
- threadStandard() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the thread standard
License requirements: None.
- threadStandard() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the thread standard - this is applicable for threaded hole type
License requirements: None.
- ThreadsViewPreferences - Interface in nxopen.preferences
-
Represents set of Threads View Preferences applicable to drafting views.
- ThreadsViewStyle - Interface in nxopen.drawings
-
Represents set of Threads View Style Preferences applicable to drafting views.
- ThreadToolBuilder - Interface in nxopen.cam
-
- ThreadToolBuilder.InsertShapes - Class in nxopen.cam
-
the available insert shapes
- ThreadTurning - Interface in nxopen.cam
-
Represents a Thread Turning operation
To create or edit an instance of this class, use
ThreadTurningBuilder
Created in NX7.5.0
- ThreadTurningBuilder - Interface in nxopen.cam
-
- ThreadTurningBuilder.DepthOptionTypes - Class in nxopen.cam
-
the Depth Option types
- ThreadTurningBuilder.InfeedLengthTypes - Class in nxopen.cam
-
the Infeed Length Types
- ThreadTurningBuilder.InfeedModes - Class in nxopen.cam
-
the Infeed modes
- THREE - Static variable in class nxopen.ame.AmeTeeJunctionVariant
-
- THREE - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Width Three
- THREE - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Width Three
- THREE - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Width Three
- THREE - Static variable in class nxopen.annotations.LineWidth
-
Width Three
- THREE - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Width Three
- THREE - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Width Three
- THREE - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.BuilderVersion
-
Enables product interface types but used along with the 'Enable Product Interface Type' customer default
- THREE - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.LocalSubdivisions
-
Three levels of subdivision
- THREE - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
-
- THREE - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
-
- THREE - Static variable in class nxopen.cae.FluidDomainBuilder.SubdivisionType
-
- THREE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
- THREE - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
-
- THREE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
- THREE - Static variable in class nxopen.cam.CamPathToolAxisType
-
- THREE - Static variable in class nxopen.die.SpringbackCompensationBuilder.DegreeType
-
Degree is 3
- THREE - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- THREE - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- THREE - Static variable in class nxopen.DisplayManager.FacetCacheMemoryLevelType
-
- THREE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Three
- THREE - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Deprecated.
Width Three
- THREE - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
-
- THREE - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
- THREE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
- THREE - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions
-
Display in 3 colors.
- THREE - Static variable in class nxopen.motion.GeneralCouplerBuilder.AttachmentType
-
three-joint coupler type
- THREE - Static variable in class nxopen.PlaneTypes.AlternateType
-
Third alternate solution
- THREE - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- THREE - Static variable in class nxopen.preferences.Width
-
Width Three
- THREE - Static variable in class nxopen.tooling.BendOperationBuilder.Prebend
-
three prebends
- THREE - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieInsertStackType
-
- THREE - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Bend
-
three bends
- THREE - Static variable in class nxopen.tooling.LayoutManagementBuilder.StationItems
-
Define station number -- 03
- THREE - Static variable in class nxopen.tooling.MotionSimulationBuilder.MoldbaseStyleType
-
Specifies three-plate style moldbase
- THREE - Static variable in class nxopen.tooling.PrebendBuilder.NumberBendsOption
-
three prebends
- THREE - Static variable in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
-
Specifies three steps of trimming
- THREE - Static variable in class nxopen.tooling.StripLayoutBuilder.FromStationType
-
the beginning layout station is 3
- THREE - Static variable in class nxopen.tooling.StripLayoutBuilder.ToStationType
-
the end layout station is 3
- THREE - Static variable in class nxopen.tooling.StripLayoutStationInformationBuilder.StationItem
-
Define station number -- 03
- THREE - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- THREE - Static variable in class nxopen.weld.JointmarkBuilder.ConnectedPanelTypes
-
- THREE_D - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingDistTypes
-
Tool tilting distance type 3d
- THREE_D - Static variable in class nxopen.DxfdwgCreator.ExportAsOption
-
export as3d data
- THREE_D - Static variable in class nxopen.DxfdwgImporter.WorkflowAs
-
3D workflow
- THREE_DIM - Static variable in class nxopen.cae.Result.SuperElementRep
-
- THREE_DIM - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType
-
3D
- THREE_DIMENSION - Static variable in class nxopen.cae.optimization.Category
-
3D constraints
- THREE_DIMENSION - Static variable in class nxopen.cam.CutParametersIpwTypes
-
3d type
- THREE_DIMENSION_MESH - Static variable in class nxopen.cae.SurfaceCoatBuilder.SelectionMethod
-
3D mesh
- THREE_DIMENSIONAL - Static variable in class nxopen.cae.Result.GroupContainer
-
- THREE_DIMENSIONAL - Static variable in class nxopen.cam.CamPathContactType
-
- THREE_DPERPENDICULAR - Static variable in class nxopen.die.AddendumSectionBuilder.SectionOrientationType
-
Orient 3D perpendicular to tangency curve
- THREE_LIMIT - Static variable in class nxopen.features.shipdesign.BracketBuilder.LimitTypes
-
The bracket has three limit objects
- THREE_LINK - Static variable in class nxopen.motion.LinkCouplerBuilder.TypeChoices
-
3-Link
- THREE_LINK_SUSPENSION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- THREE_POINT - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Three Point mode
- THREE_POINT_ANGLE - Static variable in class nxopen.GenericMeasure.Type
-
- THREE_POINT_ARC - Static variable in class nxopen.features.AssociativeArcBuilder.Types
-
Three point arc
- THREE_POINT_ARC - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
three point arc
- THREE_POINT_FORCE - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- THREE_POINT_METHOD - Static variable in class nxopen.motion.FlexBodyBuilder.Positioning
-
Positioning to user defined place using three point method
- THREE_POINT_TORQUE - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- THREE_POINTS - Static variable in class nxopen.MeasureAngleBuilder.AngleType
-
- THREE_POINTS - Static variable in class nxopen.PlaneTypes.MethodType
-
Three points method
- THREE_POINTS - Static variable in class nxopen.tooling.DieEngDefineProductOrientationBuilder.OptimalMethod
-
- THREE_POINTS_ANCHOR - Static variable in class nxopen.features.GeneralConicBuilder.Types
-
Three points, no slopes, anchor, no rho value
- THREE_POINTS_NORMAL - Static variable in class nxopen.cae.SetManager.DistributedPlanesBoundingSphereDirection
-
defines Z+ from 3 points that form a plane and a normal
- THREE_POINTS_TWO_SLOPES - Static variable in class nxopen.features.GeneralConicBuilder.Types
-
Three points, two slopes, no anchor, no rho value
- THREE_SCALARS - Static variable in class nxopen.cae.Result.DataType
-
- THREE_SIDED - Static variable in class nxopen.features.RapidSurfaceBuilder.LoopTypes
-
subdivide three sided loops
- THREE_TO_FIVE - Static variable in class nxopen.cam.ToolPathTiltAvoidance.AxisType
-
the tilting axis reference: three to five
- THREE_TO_FIVE - Static variable in class nxopen.cam.ToolPathTiltTilting.AxisType
-
the tilting axis reference: three to five
- THREE_WAY - Static variable in class nxopen.mechatronics.HydraulicValveBuilder.OutputValveType
-
3-way valve
- THREE_WAY - Static variable in class nxopen.mechatronics.PneumaticValveBuilder.OutputValveType
-
3-way valve
- ThreeBendCorner - Interface in nxopen.features
-
Represents a ThreeBendCorner feature
To create or edit an instance of this class, use
ThreeBendCornerBuilder
Created in NX5.0.0
- ThreeBendCornerBuilder - Interface in nxopen.features.sheetmetal
-
The Three Bend Corner feature class.
- ThreeBendCornerBuilder.FacePairData - Class in nxopen.features.sheetmetal
-
- ThreeBendCornerBuilder.OriginTypes - Class in nxopen.features.sheetmetal
-
This enum represents Origin type
- ThreeBendCornerBuilder.TreatmentTypeOptions - Class in nxopen.features.sheetmetal
-
This enum represents the corner treatment type.
- threeBendCornerFlangeClearance() - Method in interface nxopen.features.sheetmetal.MiterOptions
-
Returns the flange clearance used for a contour flange corner in case of a three bend corner condition.
- threeBlanks() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the usage of three blanks or one blank.
- ThreeJointCoupler - Interface in nxopen.mechatronics
-
Represents the ThreeJointCoupler.
- ThreeJointCouplerBuilder - Interface in nxopen.mechatronics
-
- ThreeJointCouplerBuilder.AxisJointType - Class in nxopen.mechatronics
-
the axis joint types.
- ThreeJointCouplerCollection - Interface in nxopen.mechatronics
-
Represents a collection of ThreeJointCouplers.
- threeJointCouplers() - Method in interface nxopen.mechatronics.PhysicsManager
-
- threshold - Variable in class nxopen.cae.Post.Colorbar
-
- threshold() - Method in interface nxopen.cae.qualityaudit.ProjectionCheckSettings
-
Returns the threshold distance from definition point to projection point.
- thresholdAngleExpression() - Method in interface nxopen.motion.PackagingMeasureBuilder
-
Returns the Measure angular threshold expression value
License requirements: mechanisms ("MECHANISMS")
.
- thresholdExpression() - Method in interface nxopen.motion.PackagingMeasureBuilder
-
Returns the Measure threshold expression value
License requirements: mechanisms ("MECHANISMS")
.
- thresholdExpression() - Method in interface nxopen.motion.SignalChartListItem
-
Returns the threshold expression
License requirements: nx_motion_motor ("NX Motion Motor")
.
- thresholdMaximum - Variable in class nxopen.cae.Post.Colorbar
-
- thresholdMinimum - Variable in class nxopen.cae.Post.Colorbar
-
- thresholdType() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the filtering threshold type
License requirements: None.
- thresholdValue() - Method in interface nxopen.cae.LaminateSpreadsheetReportBuilder
-
Returns the filtering threshold value
License requirements: None.
- THROAT_THICKNESS - Static variable in class nxopen.weld.WeldBeadSizeBuilder.TriangleMethodType
-
Trangle defined by throat thickness
- ThroatChildBuilder - Interface in nxopen.die
-
Represents a Die Throat Child sub feature.
- ThroatChildBuilder.ExtensionAttributesData - Class in nxopen.die
-
- ThroatChildBuilder.TypeOption - Class in nxopen.die
-
Settings for the type of the throat section.
- throatDefinitionParent() - Method in interface nxopen.die.RotorBuilder
-
Returns the throat definition parent builder of the rotor.
- throatOrientation() - Method in interface nxopen.die.RotorBuilder
-
Returns the throat orientation of the rotor casting.
- ThroatParentBuilder - Interface in nxopen.die
-
Represents a Die Throat Parent sub feature.
- ThroatParentBuilder.ExtensionAttributesData - Class in nxopen.die
-
- ThroatParentBuilder.TypeOption - Class in nxopen.die
-
Settings for the type of the throat section.
- throatThickness - Variable in class nxopen.weld.JointExitBuilder.FilletSizes
-
The fillet weld throat thickness
- throatThickness() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the throat thickness of a triangular shaped bead.
- throatThickToggle() - Method in interface nxopen.weld.FilletBuilder
-
Returns the toggle throat thickness.
- THROUGH - Static variable in class nxopen.cam.HoleBossGeom.DepthLimitTypes
-
Deprecated.
Depth Limit: Through
- THROUGH - Static variable in class nxopen.cam.HoleBossSet.DepthLimitTypes
-
Depth Limit: Through
- THROUGH - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingRuleTypes
-
Tool tilting rule through
- THROUGH - Static variable in class nxopen.geometricutilities.EndHoleData.FormOptions
-
Through hole - This option should not be used in NX6 and later versions.
- THROUGH3POINTS - Static variable in class nxopen.annotations.CircleCenterlineBuilder.Types
-
Centerline using 3 or More Points Method
- THROUGH_ALL - Static variable in class nxopen.ExtrudeLimitDataLimitType
-
- THROUGH_ALL - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthTypeOptions
-
Through All
- THROUGH_ALL - Static variable in class nxopen.geometricutilities.Extend.ExtendType
-
- THROUGH_AXIS - Static variable in class nxopen.geometricutilities.PatternOrientation.Enum
-
through axis orientation for Along Type first direction.
- THROUGH_AXIS - Static variable in class nxopen.SketchAlongPathBuilder.PlaneOrientationType
-
Through Axis
- THROUGH_BODY - Static variable in class nxopen.features.HolePackageBuilder.HoleDepthLimitOptions
-
Through body limit options
- THROUGH_BODY - Static variable in class nxopen.geometricutilities.EndHoleData.HoleDepthLimitOptions
-
Through body limit options
- THROUGH_CURVES - Static variable in class nxopen.MeshParameterData.FeatureType
-
- THROUGH_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
- THROUGH_LINES - Static variable in class nxopen.features.subdivision.SubdivisionSplitFaceBuilder.Types
-
Through lines split type.
- THROUGH_NEXT - Static variable in class nxopen.features.sheetmetal.NormalCutoutBuilder.DepthTypeOptions
-
Though Next
- THROUGH_POINT - Static variable in class nxopen.CurveParameterType
-
- THROUGH_POINT - Static variable in class nxopen.features.AeroFlangeBuilder.PointOption
-
- THROUGH_POINT - Static variable in class nxopen.features.AeroRibBuilder.PointOption
-
- THROUGH_POINT - Static variable in class nxopen.features.AOCSBuilder.CurveOffsetTypes
-
Through Point
- THROUGH_POINT - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method
-
Through Point
- THROUGH_POINT - Static variable in class nxopen.geometricutilities.OnPathDimensionBuilder.UpdateReason
-
Update because the through point location may have changed
- THROUGH_POINT - Static variable in class nxopen.weld.WeldParasetLocation
-
through point
- THROUGH_POINTS - Static variable in class nxopen.features.IFormBuilder.InsertionMethodOptions
-
Insert curves through points
- THROUGH_POINTS - Static variable in class nxopen.features.IsoparametricCurvesBuilder.PlacementTypes
-
Insert curves through points
- THROUGH_POINTS - Static variable in class nxopen.features.StudioSplineBuilder.Method
-
Deprecated.
Spline through points
- THROUGH_POINTS - Static variable in class nxopen.features.StudioSplineBuilderEx.Types
-
Spline through points
- THROUGH_POINTS - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlacements
-
Through Points: A highlight line is guaranteed to pass through a surface point.
- THROUGH_POINTS - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types
-
Deprecated.
Through Points: A highlight line is guaranteed to pass through a surface point.
- THROUGH_POINTS - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisExBuilder.PlacementType
-
Through the specified points
- THROUGH_POINTS - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.InsertionMethodOptions
-
Insert points through points
- THROUGH_SMCUTOUT - Static variable in class nxopen.uf.UFModl.SmcutoutType
-
- THROUGH_SMHOLE - Static variable in class nxopen.uf.UFModl.SmholeType
-
- THROUGH_SMSLOT - Static variable in class nxopen.uf.UFModl.SmslotType
-
- ThroughCurveMesh - Interface in nxopen.features
-
Represents a through curve mesh feature.
- ThroughCurveMeshBuilder - Interface in nxopen.features
-
- ThroughCurveMeshBuilder.BodyPreferenceTypes - Class in nxopen.features
-
This enum represents the body type option.
- ThroughCurveMeshBuilder.ConstructionMethod - Class in nxopen.features
-
This enum represents the Construction options.
- ThroughCurveMeshBuilder.EmphasisType - Class in nxopen.features
-
This enum represents the Emphasis options.
- ThroughCurves - Interface in nxopen.features
-
Represents a Through Curves feature.
- ThroughCurvesBuilder - Interface in nxopen.features
-
- ThroughCurvesBuilder.BodyPreferenceTypes - Class in nxopen.features
-
This enum represents the body type option.
- ThroughCurvesBuilder.ConstructionMethod - Class in nxopen.features
-
This enum represents the Construction options.
- ThroughCurvesBuilder.PatchTypes - Class in nxopen.features
-
This enum represents the Patch options.
- throughFace - Variable in class nxopen.uf.UFModl.SmslotData
-
- throughHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the through holes
License requirements: None.
- throughPlanesList() - Method in interface nxopen.features.SpineCurveBuilder
-
Returns the plane list containing the through planes.
- throughPoint() - Method in interface nxopen.features.AOCSBuilder
-
Returns the through point
License requirements: solid_modeling ("SOLIDS MODELING") OR insp_programming ("INSPECTION PROGRAMMING")
.
- throughPoint() - Method in interface nxopen.features.ParallelBuilder
-
Returns the through point.
- throughPoint() - Method in interface nxopen.features.PerpendicularBuilder
-
Returns the through point
License requirements: None.
- throughPoint() - Method in interface nxopen.features.TangentBuilder
-
Returns the through point
License requirements: None.
- throughPoint() - Method in interface nxopen.geometricutilities.OnPathDimensionBuilder
-
Returns the through point
License requirements: None.
- throughPointLocation() - Method in interface nxopen.features.shipdesign.StiffenerBySupportPathBuilder
-
Returns the through point location.
- throughPoints() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Returns the through points
License requirements: None.
- throwUnexpectedSuccess() - Static method in exception nxopen.NXException
-
- THRU - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- THRU_AXIS - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Thru axis type
- THRU_CURVES_INQUIRE_ERROR - Static variable in class nxopen.uf.UFConstants
-
- THRU_FACE_EXISTS - Static variable in class nxopen.uf.UFConstants
-
- THRU_HOLE - Static variable in class nxopen.uf.UFGdt.ModifierTypes
-
- THRU_POINT - Static variable in class nxopen.geometricutilities.Extend.ExtendType
-
- THRU_POINT - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Thru point type and normal to path
- THRU_POINT_BINORMAL - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Thru point and binormal to path
- THRU_POINT_NORMAL - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Thru point and tangent_to_path
- THRU_POINT_NORMAL_TO_VECTOR - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Thru point and normal to a vector
- THRU_POINT_PARALLEL_TO_VECTOR - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Thru point and parallel to a vector
- THRU_POINT_PROJECT - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Thru point and relative to object
- THRU_POINT_THRU_AXIS - Static variable in class nxopen.PlaneTypes.FrenetSubtype
-
Thru point and thru axis type
- THRU_SAME_AS_PLACEMENT - Static variable in class nxopen.uf.UFConstants
-
- thruBodies - Variable in class nxopen.uf.UFModl.SweepTrimObject
-
- thruClearBuilder() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the thru clear builder (inheritable double)
License requirements: None.
- thruFace() - Method in interface nxopen.features.Hole
-
Returns
the thru face of the hole.
- thruFace - Variable in class nxopen.uf.UFModl.SmcutoutData
-
- thruFace - Variable in class nxopen.uf.UFModl.SmholeData
-
- thruFlag - Variable in class nxopen.uf.UFModl.AskBallSlotParmsData
-
- thruFlag - Variable in class nxopen.uf.UFModl.AskDovetailSlotParmsData
-
- thruFlag - Variable in class nxopen.uf.UFModl.AskRectSlotParmsData
-
- thruFlag - Variable in class nxopen.uf.UFModl.AskTSlotParmsData
-
- thruFlag - Variable in class nxopen.uf.UFModl.AskUSlotParmsData
-
- thruFlag - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
-
- thruFlag - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
-
- thruFlag - Variable in class nxopen.uf.UFModlFeatures.AskSimpleHoleParmsData
-
- thruFlag - Variable in class nxopen.uf.UFModlFeatures.AskTaperHoleParmsData
-
- thruPoint - Variable in class nxopen.uf.UFModl.DfoConstraint
-
- THUMBTIP_REACH - Static variable in class nxopen.HumanData.AdvancedScalingType
-
Indicate scaling of thumbtip_reach
- TiaPortalProjectSettings - Interface in nxopen.ame
-
Tia Portal project settings node journaling class
This object does not need a creator.
- TiaPortalProjectSettingsBuilder - Interface in nxopen.ame
-
- TiaPortalProjectSettingsBuilder.TiaPortalVersionType - Class in nxopen.ame
-
represents TIA Portal Version type
- TiaProjectItemBuilder - Interface in nxopen.ame
-
- ticColor() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the tic color
License requirements: None.
- ticDirection() - Method in interface nxopen.annotations.ShipDraftingFramebarGeneralBuilder
-
Returns the tic direction
License requirements: None.
- ticDisplay() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the transverse frames tic display type
License requirements: None.
- ticFont() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the tic font
License requirements: None.
- TICKS_ONLY - Static variable in class nxopen.cae.xyplot.GridStyle
-
Only display tick
- ticksDisplayStyleSettings() - Method in interface nxopen.cae.xyplot.BaseGridLayoutStyleSetting
-
Returns the ticks display style
License requirements: None.
- ticLabelTextOrientation() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the tic label text orientation type
License requirements: None.
- ticLength() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the tic length
License requirements: None.
- ticWidth() - Method in interface nxopen.annotations.FrameBarElementStyleBuilder
-
Returns the tic width
License requirements: None.
- TIF - Static variable in class nxopen.annotations.DraftingImage.FileType
-
TIF file type
- TIF - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageFileFormatType
-
Tagged Image File Format (TIFF) file format
- TIF - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageFileFormatType
-
Tagged Image File Format (TIFF) file format
- TIF - Static variable in class nxopen.display.SaveImageFileBrowserBuilder.FileFormats
-
Tagged Image File Format (TIFF) file format
- TIF - Static variable in class nxopen.pdm.FileManagement.FileType
-
- TIF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TIF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TIFF - Static variable in class nxopen.gateway.ImageCaptureBuilder.ImageFormat
-
the tiff image format
- TIFF - Static variable in class nxopen.uf.UFDisp.ImageFormat
-
- TIFF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TIFF_FORMAT - Static variable in class nxopen.uf.UFPlot.Format
-
- tightness() - Method in interface nxopen.features.shipdesign.EditStockBuilder
-
Returns the tightness to apply to plate and subplate systems.
- tightness() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the tightness, which defines the plate is tight (air tight, oil tight, water tight) or non tight.
- tightness() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the tightness desired for the plate system.
- tightness() - Method in interface nxopen.features.shipdesign.SubSystemBuilder
-
Returns the tightness to apply to plate and subplate systems.
- TILT - Static variable in class nxopen.cam.CutParametersActionWhenGougingTypes
-
Tilt
- TILT - Static variable in class nxopen.cam.ToolPathTiltAvoidance.MethodType
-
Avoidance method: tilt
- tiltAngle() - Method in interface nxopen.cam.DmRotaryFloorFinishBuilder
-
Returns the tilt angle
License requirements: None.
- tiltAngle() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the tilt angle (degrees)
License requirements: None.
- tiltAngle() - Method in interface nxopen.cam.InterpolateVector
-
Returns the tilt angle
License requirements: None.
- tiltAngle() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the tilt angle
License requirements: None.
- tiltAngle() - Method in interface nxopen.cam.ToolAxisChange
-
Returns the tilt angle
License requirements: None.
- tiltAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Tilt Angle
License requirements: None.
- tiltAngle() - Method in interface nxopen.cam.ToolPathTiltTilting
-
Returns the tilt angle
License requirements: None.
- tiltAngle() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the tilt angle
License requirements: None.
- tiltAngleType() - Method in interface nxopen.cam.ToolAxisTilt
-
Returns the tilt angle type
License requirements: None.
- tiltAvoidance() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
Returns the avoidance builder
License requirements: None.
- tiltClearance() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
Returns the clearance builder
License requirements: None.
- tiltClearanceAngle() - Method in interface nxopen.cam.ToolPathTiltClearance
-
Returns the tilt clearance angle
License requirements: None.
- TILTING - Static variable in class nxopen.features.NSidedSurfaceBuilder.CenterControlType
-
tilting type
- tiltingDistanceType() - Method in interface nxopen.cam.ToolPathTiltTilting
-
Returns the tool distance type options
License requirements: None.
- tiltingDrivePoint() - Method in interface nxopen.cam.ToolPathTiltTilting
-
Returns the tilting drive point
License requirements: None.
- tiltingRotationAngle() - Method in interface nxopen.cam.ToolPathTiltTilting
-
Returns the tilt rotation angle
License requirements: None.
- tiltingRuleType() - Method in interface nxopen.cam.ToolPathTiltTilting
-
Returns the tool tilting rule options
License requirements: None.
- tiltMachine() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
Returns the machine builder
License requirements: None.
- tiltTilting() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
Returns the tilting builder
License requirements: None.
- tiltToolPaths(CAMObject[], ToolPathTiltBuilder) - Method in interface nxopen.cam.CAMSetup
-
Tool Path Tilt
License requirements: cam_base ("CAM BASE")
.
- TIME - Static variable in class nxopen.ame.InterfaceAccessType
-
- TIME - Static variable in class nxopen.ame.PlcDataType
-
- TIME - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes
-
Time
- time - Variable in class nxopen.BasePart.HistoryEventInformation
-
time of last change
- TIME - Static variable in class nxopen.cae.BaseIteration.IterationValueType
-
Value represents a Time
- TIME - Static variable in class nxopen.cae.ftk.DataManager.AfuRecordZValue
-
The z value is attribute of Time field in an afu record
- TIME - Static variable in class nxopen.cae.Result.LoadcaseValueType
-
Value type - Time
- TIME - Static variable in class nxopen.cae.Result.Quantity
-
- TIME - Static variable in class nxopen.cae.ResultProbeBuilder.IterationType
-
- time() - Method in interface nxopen.cae.SimConditionTimeStep
-
Returns the Time Step time
License requirements: None.
- TIME - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Time History
- TIME - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Time History
- TIME - Static variable in class nxopen.cae.XyFunctionLoadType
-
Function is Time History
- TIME - Static variable in class nxopen.cae.XyFunctionMaterialType
-
Function is Time History
- TIME - Static variable in class nxopen.cae.XyFunctionMeasure
-
Time unit
- TIME - Static variable in class nxopen.cae.XyFunctionMotionType
-
Function is Time History
- TIME - Static variable in class nxopen.cae.XyFunctionResponseType
-
Function is Time History
- TIME - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DwellTypes
-
Dwell: Time
- time() - Method in interface nxopen.cam.CutDwell
-
Returns the cut dwell time
License requirements: None.
- TIME - Static variable in class nxopen.cam.CutDwell.Types
-
Dwell after Rough Cut: Time
- TIME - Static variable in class nxopen.cam.FinishDwell.Types
-
Dwell after Finish/Profile Cut: Time
- TIME - Static variable in class nxopen.cam.TurnRoughFinishLocalReturnBuilder.ModeTypes
-
Local Return: Time
- time() - Method in interface nxopen.cam.TurnRoughFinishLocalReturnBuilder
-
Returns the local time value
License requirements: None.
- time() - Method in interface nxopen.DateItemBuilder
-
Returns the time.
- TIME - Static variable in class nxopen.mechatronics.CamProfileBuilder.MasterValueUnit
-
Time
- TIME - Static variable in class nxopen.mechatronics.GraphControlBuilder.MasterType
-
Time
- TIME - Static variable in class nxopen.mechatronics.GraphControlBuilder.MasterValueUnit
-
Time
- TIME - Static variable in class nxopen.mechatronics.MotionProfileBuilder.MasterValueUnit
-
Time
- TIME - Static variable in class nxopen.motion.ResultMeasure.ResultType
-
Result measure for time
- TIME - Static variable in class nxopen.NXObject.AttributeType
-
Time and Date
- time - Variable in class nxopen.sim.IsvControlPanelBuilder.DetailData
-
- TIME - Static variable in class nxopen.sim.SimDebugBuilder.DumpType
-
Dump Time
- time - Variable in class nxopen.Validation.LookupTimeData
-
Time associate with the key
- TIME - Static variable in class nxopen.Validation.MapType
-
Time map
- TIME_AT_MAXIMUM_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
-
- TIME_AT_MINIMUM_TEMPERATURE - Static variable in class nxopen.cae.Result.Quantity
-
- TIME_BASED - Static variable in class nxopen.mechatronics.ObjectSourceBuilder.CopyEventTriggerOption
-
TimeBased
- TIME_DATA - Static variable in class nxopen.cae.SimLoadRecipeTypes.DataTypes
-
Time Data
- TIME_DELAY - Static variable in class nxopen.cae.responsesimulation.CSDExcitation.CorrelationType
-
- TIME_HM - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- TIME_HMS - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType
-
Deprecated.
- TIME_HOUR - Static variable in class nxopen.cae.XyFunctionUnit
-
Time unit: hours
- TIME_MIN - Static variable in class nxopen.cae.XyFunctionUnit
-
Time unit: minutes
- TIME_OF_DAY - Static variable in class nxopen.ame.PlcDataType
-
- TIME_SEC - Static variable in class nxopen.cae.XyFunctionUnit
-
Time unit: seconds
- TIME_STAMP - Static variable in class nxopen.ExpressionCollection.SortType
-
Creation order - earliest first
- TimeAnalysis - Interface in nxopen.sim
-
Represents the TimeAnalysis class object
These objects are created by the simulation for each channel.
- timeDependency - Variable in class nxopen.uf.UFSf.AskLanguageData
-
- timeDuration() - Method in interface nxopen.cae.responsesimulation.CombinationEvaluationOptions
-
Returns the time duration in second.
- timeEstimate() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the estimated time to execute these instructions
License requirements: None.
- timeExpression() - Method in interface nxopen.motion.MotionSolutionBuilder
-
Returns the time expression
License requirements: None.
- timeExpression() - Method in interface nxopen.tooling.RunSimulationBuilder
-
Returns the time in the cycle
License requirements: None.
- timeExtents() - Method in interface nxopen.cae.DurabilityDataControlBuilder
-
Returns the time extents.
- timeFormatType() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the cell time format.
- timeInterval() - Method in interface nxopen.mechatronics.ObjectSourceBuilder
-
Returns the time interval.
- timeLimit() - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Returns the time limit value
License requirements: None.
- TIMER - Static variable in class nxopen.ame.MemorySectionType
-
- TIMER - Static variable in class nxopen.ame.PlcDataType
-
- TIMER - Static variable in class nxopen.motion.SignalChartListItem.Timer
-
Timer
- TimerValues() - Constructor for class nxopen.uf.UF.TimerValues
-
- TimerValues(double, double) - Constructor for class nxopen.uf.UF.TimerValues
-
- times() - Method in interface nxopen.cam.Cycle
-
Returns the times
License requirements: None.
- times - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- timeScaleFactor() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the time scale factor
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- timeSensor() - Method in interface nxopen.motion.SignalChartListItem
-
Returns the time sensor
License requirements: nx_motion_motor ("NX Motion Motor")
.
- timesStatus() - Method in interface nxopen.cam.Cycle
-
Returns the times status
License requirements: None.
- timestamp() - Method in interface nxopen.features.Feature
-
Returns the timestamp of the feature
License requirements: None.
- timeStamp() - Method in interface nxopen.routing.DesignRuleOverride
-
Returns the time stamp of the design rule override is returned
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- timeStamp() - Method in interface nxopen.routing.DesignRuleViolation
-
Returns the date/time stamp of the violation is inquired
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- timeStatistics() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the time statistics
Activates specific CDTire results:
Simulation time (time);
CDTire tire model type (submodel);
CDTire road model type (type);
CPU time for this tire (cpu_time);
License requirements: None.
- timeStep() - Method in interface nxopen.cae.responsesimulation.VelocityImpactParameters
-
Returns the time step.
- timeString - Variable in class nxopen.uf.UFAttr.GetStringTimeUserAttributeData
-
- timeToSrs(String, int, double, AfuMathOperation.TimeToSrsAxisType, double, double, double, int, AfuMathOperation.TimeToSrsResponseType, String, String) - Method in interface nxopen.cae.AfuMathOperation
-
Convert Time to SRS
License requirements: None.
- timeUnit - Variable in class nxopen.cae.Result.ResultBasicUnit
-
- timeValue() - Method in interface nxopen.cae.AfuZHeaderInfo
-
Returns the value of time field
License requirements: None.
- timeValue - Variable in class nxopen.NXObject.AttributeInformation
-
Time/Date attribute value (the default value is returned when reading templates of non-set attributes).
- TIMING_CHART - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Timing Chart
- TIMING_CHART - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Timing Chart
- TIMING_CHART - Static variable in class nxopen.cae.XyFunctionMotionType
-
Function is Timing Chart
- tinyedgecolor - Variable in class nxopen.cae.FemPart.MeshPreferencesData
-
Tiny edge color
- Tip - Interface in nxopen.die
-
Represents a Tip feature.
- Tip.MapEdgeData - Class in nxopen.die
-
- tipAngle() - Method in interface nxopen.cam.HoleBossSet
-
Returns the tip angle
License requirements: None.
- tipAngle - Variable in class nxopen.features.Hole.CounterboreHoleData
-
Expression for tip angle
- tipAngle - Variable in class nxopen.features.Hole.CountersinkHoleData
-
Expression for tip angle
- tipAngle - Variable in class nxopen.features.Hole.SimpleHoleData
-
Expression for tip angle
- tipAngle() - Method in interface nxopen.features.Hole
-
Returns
the tip angle of the hole.
- tipAngle() - Method in interface nxopen.features.HoleFeatureBuilder
-
Returns
the tip angle of the hole.
- tipAngle() - Method in interface nxopen.geometricutilities.EndHoleData
-
Returns the tip angle
License requirements: None.
- tipAngle() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Returns the value for the tip angle of the channel.
- tipAngle() - Method in interface nxopen.tooling.CoolingExtendBuilder
-
Returns the value for the tip angle of the channel.
- tipAngle - Variable in class nxopen.uf.UFModl.SmholeData
-
- tipAngle - Variable in class nxopen.uf.UFModlFeatures.AskCBoreHoleParmsData
-
- tipAngle - Variable in class nxopen.uf.UFModlFeatures.AskCSunkHoleParmsData
-
- tipAngle - Variable in class nxopen.uf.UFModlFeatures.AskSimpleHoleParmsData
-
- tipAngleBuilder() - Method in interface nxopen.cam.GrooveToolBuilder
-
Returns the tip angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tipAngleMode() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the tip angle selection mode
License requirements: None.
- tipAngleMode() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the tip angle selection mode
License requirements: None.
- tipAngleValue() - Method in interface nxopen.tooling.CoolingExtendBuilder
-
Returns the value for the tip angle of the channel.
- tipDiameter() - Method in interface nxopen.cam.LaserTool
-
Returns the Nozzle Tip Diameter
License requirements: None.
- tipEndType() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Returns the candidate of tip end type
License requirements: None.
- tipEndType() - Method in interface nxopen.tooling.CoolingExtendBuilder
-
Returns the candidate of tip end type
License requirements: None.
- tipFeature() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the tip feature
License requirements: die_engineering ("DIE ENGINEERING")
.
- tipMode() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the probe tip selection mode
License requirements: None.
- tipMode() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the probe tip selection mode
License requirements: None.
- tipNumber() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the probe tip number
License requirements: None.
- tipNumber() - Method in interface nxopen.cam.InspectionMoveBuilder
-
Returns the probe tip number
License requirements: None.
- tipNumber() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the probe tip number
License requirements: None.
- tipNumber() - Method in interface nxopen.cam.InspectionSensorMassEditBuilder
-
Returns the tip
License requirements: None.
- tipOffsetBuilder() - Method in interface nxopen.cam.ThreadToolBuilder
-
Returns the tip offset builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tippedProduct() - Method in interface nxopen.die.FillBuilder
-
Returns the tipped product of the area fill
License requirements: die_engineering ("DIE ENGINEERING")
.
- tippedProduct() - Method in interface nxopen.die.FlangeTaskBuilder
-
Returns the tipped product of the flange task
License requirements: die_engineering ("DIE ENGINEERING")
.
- tippedProduct() - Method in interface nxopen.die.FormTaskBuilder
-
Returns the tipped product of the form task.
- tippedProduct() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the tipped product of the pierce task
License requirements: die_engineering ("DIE ENGINEERING")
.
- tippedProduct() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the tipped product of the trim task
License requirements: die_engineering ("DIE ENGINEERING")
.
- tipRelease() - Method in interface nxopen.cam.Cycle
-
Returns the (minimal) tip release
License requirements: None.
- tipString() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
- tipString() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the tip to use for inspection string
License requirements: None.
- tipType() - Method in interface nxopen.cam.InspectionProbeTrackingBuilder
-
Returns the tip type
License requirements: None.
- Tire - Interface in nxopen.motion
-
Tire Motion element.
- TIRE_INITIAL_CONDITION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices
-
- TIRE_PARAMETER_FILE - Static variable in class nxopen.motion.TirePropertyCdBuilder.AmbientTempType
-
- TIRE_PARAMETER_FILE - Static variable in class nxopen.motion.TirePropertyCdBuilder.InflationPressureType
-
- TIRE_SPINDLE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TIRE_SPINDLE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- tireBodyOutputFileName() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the name of the the output part file for the tire body.
- TireBuilder - Interface in nxopen.motion
-
- TireBuilder.Type - Class in nxopen.motion
-
the Tire type.
- TireCollection - Interface in nxopen.motion
-
Represents a collection of motion tire elements
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- tireControlFile() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the tire control file.
- tireDefinition() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the option to specify the method of tire profile definition.
- tireDefinitionBody() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the selection list for tire body.
- tireDefinitionProfile() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the selection list for tire profile.
- TireEnvelope - Interface in nxopen.features.vehicledesign
-
Represents a tire envelope feature
To create or edit an instance of this class, use
TireEnvelopeBuilder
Created in NX7.5.0
- TireEnvelopeBuilder - Interface in nxopen.features.vehicledesign
-
Represents a builder that is used to edit or create a
TireEnvelope
.
- TireEnvelopeBuilder.DriverGraphOption - Class in nxopen.features.vehicledesign
-
Settings to indicate the driver definition to use with the MacPherson Strut suspension template.
- TireEnvelopeBuilder.EnvelopeOffsetMethod - Class in nxopen.features.vehicledesign
-
Settings to indicate how the offset will be defined.
- TireEnvelopeBuilder.MotionMethod - Class in nxopen.features.vehicledesign
-
Settings to indicate how the suspension system motion will be defined.
- TireEnvelopeBuilder.SpindleFileLocationOption - Class in nxopen.features.vehicledesign
-
Settings to indicate the location to select the spindle file.
- TireEnvelopeBuilder.SuspensionTemplateType - Class in nxopen.features.vehicledesign
-
Settings to indicate the defined suspension template to use.
- TireEnvelopeBuilder.TireDefinitionOption - Class in nxopen.features.vehicledesign
-
Settings to indicate how the tire profile will be defined.
- tirePropertiesBasic() - Method in interface nxopen.motion.MotionManager
-
- tirePropertiesCd() - Method in interface nxopen.motion.MotionManager
-
- tirePropertiesFt() - Method in interface nxopen.motion.MotionManager
-
- tirePropertiesMotorcycle() - Method in interface nxopen.motion.MotionManager
-
- tirePropertiesNonInertial() - Method in interface nxopen.motion.MotionManager
-
- tirePropertiesTno() - Method in interface nxopen.motion.MotionManager
-
- TireProperty - Interface in nxopen.motion
-
Tire Property element.
- TirePropertyAdvancedParameters - Interface in nxopen.motion
-
Represents a TirePropertyAdvancedParameters builder .
- TirePropertyAdvancedParameters.ContactType - Class in nxopen.motion
-
The block type can be Function when a spline curve is used or
Profile when a profile is used.
- TirePropertyAdvancedParameters.FrictType - Class in nxopen.motion
-
The block type can be Function when a spline curve is used or
Profile when a profile is used.
- TirePropertyAdvancedParameters.RollingType - Class in nxopen.motion
-
the rolling radius type.
- TirePropertyAdvancedParameters.SurfType - Class in nxopen.motion
-
the type of surface interaction calculations used.
- TirePropertyBasic - Interface in nxopen.motion
-
Basic Tire Property element.
- TirePropertyBasicBuilder - Interface in nxopen.motion
-
- TirePropertyBasicCollection - Interface in nxopen.motion
-
- TirePropertyBasicParameters - Interface in nxopen.motion
-
Represents a TirePropertyBasicParameters builder .
- TirePropertyBasicParameters.CorneringType - Class in nxopen.motion
-
A constant will be used for the Cornering Stiffness when CorneringType is 'Cornering'.
- TirePropertyBuilder - Interface in nxopen.motion
-
Represents a Builder base class for Tire Properties
This is an abstract class, and cannot be created.
- TirePropertyCd - Interface in nxopen.motion
-
CDTIRE Tire Property
This is an object that contains parameters needed for the CDTIRE Tire model
To create or edit an instance of this class, use
TirePropertyCdBuilder
Created in NX11.0.0
- TirePropertyCdBuilder - Interface in nxopen.motion
-
- TirePropertyCdBuilder.AmbientTempType - Class in nxopen.motion
-
The Ambient Temp type.
- TirePropertyCdBuilder.InflationPressureType - Class in nxopen.motion
-
The Inflation Pressure type.
- TirePropertyCdBuilder.ModelType - Class in nxopen.motion
-
The Model type.
- TirePropertyCdCollection - Interface in nxopen.motion
-
Represents a collection of Motion CDTire Tire Property elements
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- TirePropertyFt - Interface in nxopen.motion
-
FTire Tire Property element
This is an object that contains parameters needed for the FTire Tire model
To create or edit an instance of this class, use
TirePropertyFtBuilder
Created in NX11.0.0
- TirePropertyFtBuilder - Interface in nxopen.motion
-
- TirePropertyFtCollection - Interface in nxopen.motion
-
Represents a collection of Motion FTire Tire Property elements
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- TirePropertyHighOrderParameters - Interface in nxopen.motion
-
Represents a Tire Property builder for the High Order parameters used in Motorcycle and Basic properties.
- TirePropertyHighOrderParameters.UnloadingVertStiffType - Class in nxopen.motion
-
The block type can be Function when a spline curve is used or
Profile when a profile is used.
- TirePropertyMotorcycle - Interface in nxopen.motion
-
Motorcycle Tire Property element.
- TirePropertyMotorcycleBuilder - Interface in nxopen.motion
-
- TirePropertyMotorcycleCollection - Interface in nxopen.motion
-
Represents a collection of Motion Motorcycle Tire Property elements
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- TirePropertyNonInertial - Interface in nxopen.motion
-
NonInertial Tire Property element.
- TirePropertyNonInertialBuilder - Interface in nxopen.motion
-
- TirePropertyNonInertialCollection - Interface in nxopen.motion
-
Represents a collection of Motion Non-inertial Tire Property elements
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- TirePropertyTno - Interface in nxopen.motion
-
TNO Tire Property element
This is an object that contains parameters needed for the TNO Tire model
To create or edit an instance of this class, use
TirePropertyTnoBuilder
Created in NX11.0.0
- TirePropertyTnoBuilder - Interface in nxopen.motion
-
Represents a Builder for Motion TNO Tire Property.
- TirePropertyTnoBuilder.ContactMethodType - Class in nxopen.motion
-
The Contact Method type.
- TirePropertyTnoBuilder.DynamicsType - Class in nxopen.motion
-
The Dynamics type.
- TirePropertyTnoBuilder.IswitchDefinitionType - Class in nxopen.motion
-
The Iswitch Definition type.
- TirePropertyTnoBuilder.SlipForcesType - Class in nxopen.motion
-
The Slip Forces type.
- TirePropertyTnoBuilder.TireSideType - Class in nxopen.motion
-
The Tire Side type.
- TirePropertyTnoBuilder.TrackSideType - Class in nxopen.motion
-
The Track Side type.
- TirePropertyTnoCollection - Interface in nxopen.motion
-
Represents a collection of Motion Tno Tire Property elements
To obtain an instance of this class, refer to
MotionManager
Created in NX11.0.0
- tires() - Method in interface nxopen.motion.MotionManager
-
- tireSide() - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
Returns the tire side.
- tireType() - Method in interface nxopen.motion.TireBuilder
-
Returns the tire type.
- title() - Method in interface nxopen.annotations.BalloonNoteBuilder
-
Returns the title
License requirements: None.
- title() - Method in interface nxopen.annotations.BusinessModifier
-
Returns the title
License requirements: None.
- title() - Method in interface nxopen.annotations.CompanyProprietaryInformationBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.CustomerValueBusinessModifierBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.EnterpriseIdentificationBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.ExportControlBuilder
-
Returns the title
License requirements: None.
- title() - Method in interface nxopen.annotations.FeatureIdBusinessModifierBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.GeneralNoteBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.GovernmentSecurityInformationBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.LocatorDesignatorBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.MaterialSpecificationBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.PartIdentificationBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.PmiIntegerBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.PmiNumberBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.PmiStringBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.PmiUrlNoteBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.PmiUserDefinedBuilder
-
Returns the title
License requirements: None.
- title() - Method in interface nxopen.annotations.ProcessSpecificationBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.RevisionBusinessModifierBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.SafetyClassBusinessModifierBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.SpecificNoteBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the title
License requirements: None.
- title() - Method in interface nxopen.annotations.UrlBusinessModifierBuilder
-
Returns the str title
License requirements: None.
- title() - Method in interface nxopen.AttributePropertiesBaseBuilder
-
Returns the attribute title.
- title() - Method in interface nxopen.AttributeTemplatesBuilder
-
Returns the title.
- title() - Method in interface nxopen.cae.CorrelSolutionBuilder
-
Returns the correlation metasolution name
License requirements: None.
- title() - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord
-
Returns the title name
License requirements: None.
- title() - Method in interface nxopen.cae.ResultType
-
Returns the title defined for the result type in the result file
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- TITLE - Static variable in class nxopen.cae.xyplot.ModelType
-
- TITLE - Static variable in class nxopen.cae.xyplot.TextType
-
Title label
- title - Variable in class nxopen.die.DrawDiePunchSectionBuilder.FormingAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.DrawDiePunchSectionBuilder.PunchProfileAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.HoleChildBuilder.HoleAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.HoleChildBuilder.PadAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.HoleParentBuilder.HoleAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.HoleParentBuilder.PadAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.KeywayChildBuilder.SlotAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.KeywayParentBuilder.SlotAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.PadChildBuilder.HoleAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.PadChildBuilder.PadAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.PadParentBuilder.HoleAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.PadParentBuilder.PadAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.PierceHoleChildBuilder.HoleAttributesData
-
title for attribute
- title - Variable in class nxopen.die.PierceHoleParentBuilder.HoleAttributesData
-
title for attribute
- title - Variable in class nxopen.die.RotorSectionBuilder.RotorAttributesData
-
title for attribute
- title - Variable in class nxopen.die.SteelInsertSectionBuilder.FormingAttributesData
-
title for attribute
- title - Variable in class nxopen.die.ThroatChildBuilder.ExtensionAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.ThroatParentBuilder.ExtensionAttributesData
-
Title for attribute.
- title - Variable in class nxopen.die.WearPlateLocChildBuilder.PadAttributesData
-
title for attribute
- title - Variable in class nxopen.die.WearPlateLocParentBuilder.PadAttributesData
-
title for attribute
- title() - Method in interface nxopen.drafting.AttributeItemBuilder
-
Returns the title.
- title() - Method in interface nxopen.issue.IssueContent
-
Returns the issue title
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- title() - Method in interface nxopen.issue.IssueContentBuilder
-
Returns the issue title
License requirements: nx_issue_mgmt ("NX Issue Tracking")
.
- title - Variable in class nxopen.NXObject.AttributeInformation
-
Attribute title (for arrays, this is the array title without an appended index)
- title() - Method in interface nxopen.pdm.EffectivityAttributePropertiesBuilder
-
Returns the attribute title.
- title() - Method in interface nxopen.routing.RoutePartDescriptor
-
Returns the title for the part descriptor used by Routing.
- title() - Method in interface nxopen.shipdesign.NavigatorNode
-
Returns the node title.
- title - Variable in class nxopen.uf.UFDrf.CustomSymbolText
-
- title - Variable in class nxopen.uf.UFPd.AttributeValueData
-
- title - Variable in class nxopen.uf.UFPd.AttributeValueData2
-
- title - Variable in class nxopen.uf.UFPd.BusinessModifier
-
- Title() - Constructor for class nxopen.uf.UFSfLegend.Title
-
- Title(int, String[]) - Constructor for class nxopen.uf.UFSfLegend.Title
-
- title() - Method in interface nxopen.weld.CharacteristicsValueBuilder
-
Returns the title of this attribute.
- TITLE_PAGE - Static variable in class nxopen.ame.DocumentType
-
- TITLE_PAGE - Static variable in class nxopen.ame.PageBuilder.Types
-
- titleAlias - Variable in class nxopen.NXObject.AttributeInformation
-
Attribute title alias (may be null) (for arrays, this is the array title alias, without an appended index)
- TitleBlock - Interface in nxopen.annotations
-
- TitleBlock - Interface in nxopen.diagramming
-
- titleBlockAlignmentPosition() - Method in interface nxopen.annotations.DrawingFormatTitleBuilder
-
Returns the option that specifies how the title block aligns relative to the cursor during placement
License requirements: None.
- TitleBlockCellBuilder - Interface in nxopen.annotations
-
- TitleBlockCellBuilder - Interface in nxopen.diagramming
-
Represents a builder to edit
TitleBlock
's cell
This is a sub-builder class and cannot be directly instantiated
Created in NX11.0.1
- TitleBlockCellBuilderList - Interface in nxopen.annotations
-
Represents a list of objects.
- TitleBlockCollection - Interface in nxopen.annotations
-
- TitleBlockCollection - Interface in nxopen.diagramming
-
Represents a collection of Title Block.
- TitleBlockPreferences - Interface in nxopen.annotations
-
Represents title_block preferences.
- titleBlocks() - Method in interface nxopen.diagramming.DiagrammingManager
-
- titleBlocks() - Method in interface nxopen.drafting.DraftingApplicationManager
-
Returns the TitleBlockCollection belonging to this part .
- titleCell - Variable in class nxopen.uf.UFDraw.TabnotParams
-
- titles - Variable in class nxopen.assemblies.AttributeSearchTermBuilder.CriteriaData
-
search criteria titles
- titles - Variable in class nxopen.uf.UFSfLegend.IndexTextAttr
-
- titleVisibility() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the TitleVisibility
License requirements: None.
- titleVisibility() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the TitleVisibility
License requirements: None.
- tjointColorFontWidth() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the color, font, and width of the T-joint curves.
- tlAdjReg() - Method in interface nxopen.cam.TrackpointBuilder
-
Returns the adjust register
License requirements: cam_base ("CAM BASE")
.
- tlAdjRegBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Adjust Register
License requirements: None.
- tlangl - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
-
- tlaxisBladeRollAngle() - Method in interface nxopen.cam.MillCutParameters
-
Returns the max blade roll angle
License requirements: None.
- tlBarrelRadBuilder() - Method in interface nxopen.cam.BarrelToolBuilder
-
Returns the Barrel Radius builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlBellAngBuilder() - Method in interface nxopen.cam.DrillCenterBellToolBuilder
-
Returns the Bell Angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlBellDiameterBuilder() - Method in interface nxopen.cam.DrillCenterBellToolBuilder
-
Returns the Bell Diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlCoolantThro() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the coolant through
License requirements: None.
- tlCor1RadBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the Corner Radius builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlCor1RadBuilder() - Method in interface nxopen.cam.MillToolBuilder
-
Returns the Lower Radius builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlCor2RadBuilder() - Method in interface nxopen.cam.MillToolBuilder
-
Returns the Upper Radius builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlCtlgNum() - Method in interface nxopen.cam.ToolBuilder
-
Returns the Catalog Number
License requirements: None.
- tlCutcomReg() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Cutcom Register
License requirements: None.
- tlCutcomReg() - Method in interface nxopen.cam.TrackpointBuilder
-
Returns the cutcom register
License requirements: cam_base ("CAM BASE")
.
- tlCutcomRegBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Cutcom Register Builder
License requirements: None.
- tlDescription() - Method in interface nxopen.cam.ToolBuilder
-
Returns the Cutter Description
License requirements: None.
- tlDesignation() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the Designation
License requirements: None.
- tlDiameter() - Method in interface nxopen.cam.FlowBuilder
-
Returns the flow reference tool diameter
License requirements: None.
- tlDiameterBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Tool Diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlDirection() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the tool direction
License requirements: None.
- tlFluteLnBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the flute length
License requirements: cam_base ("CAM BASE")
.
- tlFormType() - Method in interface nxopen.cam.DrillThreadMillToolBuilder
-
Returns the form type
License requirements: None.
- tlHeightBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the length
License requirements: cam_base ("CAM BASE")
.
- tlHolderDescription() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Holder Description
License requirements: None.
- tlHolderLibref() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Holder Library Reference
License requirements: None.
- tlHolderNumberBuilder() - Method in interface nxopen.cam.ToolBuilder
-
Returns the Holder Number
License requirements: None.
- tlHolderOffsetBuilder() - Method in interface nxopen.cam.HolderSectionBuilder
-
Returns the Offset (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlIncludedAngBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the Included Angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlLibref() - Method in interface nxopen.cam.ToolBuilder
-
Returns the Cutter Libref
License requirements: None.
- tlLowCorRadBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the low corner radius
License requirements: cam_base ("CAM BASE")
.
- tlManualToolChange() - Method in interface nxopen.cam.ToolBuilder
-
Returns the Manual Tool Change
License requirements: None.
- tlMountingJunction() - Method in interface nxopen.cam.SolidToolBuilder
-
Returns the T1 mounting junction
License requirements: None.
- tlNumberBuilder() - Method in interface nxopen.cam.ToolBuilder
-
Returns the Tool Number
License requirements: None.
- tlNumFlutesBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Number of Flutes builder (inheritable integer)
License requirements: cam_base ("CAM BASE")
.
- tlPilotDiaBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the pilot diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlPilotLengthBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the pilot length builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlPitchBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the Pitch builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlPointAngBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the Point Angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlPointLengthBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the Point Length builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlShankDiaBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Shank Diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlShoulderDistBuilder() - Method in interface nxopen.cam.DrillStepToolBuilder
-
Returns the Shoulder Dist builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlTaperAngBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Taper Angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlTaperDiaDistBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the Taper Diameter Distance builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlTapHolderType() - Method in interface nxopen.cam.DrillTapToolBuilder
-
Returns the tap holder type
License requirements: None.
- tlText() - Method in interface nxopen.cam.ToolBuilder
-
Returns the tool text
License requirements: None.
- tlThreadFormMethod() - Method in interface nxopen.cam.DrillTapToolBuilder
-
Returns the thread form method
License requirements: None.
- tlTipAngBuilder() - Method in interface nxopen.cam.MillToolBuilder
-
Returns the Tip Angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlTipDiameterBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the Tip Diameter builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlTipLengthBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the Tip Length builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlUpCorRadBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the up corner radius
License requirements: cam_base ("CAM BASE")
.
- tlXcenCor1Builder() - Method in interface nxopen.cam.MillToolBuilder
-
Returns the X Center R1 builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlXcenCor2Builder() - Method in interface nxopen.cam.MillToolBuilder
-
Returns the X Center R2 builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlXOffsetBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the X Offset builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlYcenBarrelBuilder() - Method in interface nxopen.cam.BarrelToolBuilder
-
Returns the Ycen Barrel builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlYcenCor1Builder() - Method in interface nxopen.cam.MillToolBuilder
-
Returns the Y Center R1 builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlYcenCor2Builder() - Method in interface nxopen.cam.MillToolBuilder
-
Returns the Y Center R2 builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlYzOffsetBuilder() - Method in interface nxopen.cam.DrillToolBuilder
-
Returns the YZ Offset builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlZMountBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Z Mount builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- tlZOffsetBuilder() - Method in interface nxopen.cam.MillingToolBuilder
-
Returns the Z Offset builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- TNO - Static variable in class nxopen.motion.TireBuilder.Type
-
for TNO Tire Model
- tnoFile() - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
Returns the TNO file.
- TO - Static variable in class nxopen.cam.TeachmodeLinearMoveBuilder.CurveToolPositionTypes
-
To Curve
- to() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the face or datum plane at which the cutout ends.
- TO - Static variable in class nxopen.routing.RunItem.Type
-
A "To" item type
- to - Variable in class nxopen.uf.UFView.Lights
-
- TO_ALL_FACES - Static variable in class nxopen.features.FaceBlendBuilder.TrimmingMethod
-
Trim to all faces
- TO_ALL_VALUES - Static variable in class nxopen.weld.EdgePrepValuesBuilder.Apply
-
Update all values of each selected joint.
- TO_ANCHORAGE - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.RoutingTypes
-
to anchorage
- TO_APOINT - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Motion
-
motion to a point
- TO_APOINT - Static variable in class nxopen.cam.OperationTransformBuilder.Motion
-
motion to a point
- TO_APOINT - Static variable in class nxopen.cam.ToolPathEditorBuilder.MotionMethodType
-
- TO_APOINT - Static variable in class nxopen.MeasureDistanceBuilder.MeasureType
-
- TO_AVERAGE - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.Types
-
Project using best fit plane or axis
- TO_BLANK - Static variable in class nxopen.cam.TurnEngageRetractBuilder.ExtendMethods
-
Extend to blank
- TO_BOUNDARY - Static variable in class nxopen.features.shipdesign.ProfileTransitionBuilder.MisalignedModeType
-
Transition target directly to boundary end.
- TO_CENTER - Static variable in class nxopen.annotations.RadiusDimensionType
-
Radius dimension to center
- TO_CHANGED_VALUES_ONLY - Static variable in class nxopen.weld.EdgePrepValuesBuilder.Apply
-
Update only the changed values to each selected joint.
- TO_CONE_TIP - Static variable in class nxopen.features.HolePackageBuilder.HoleDepthOptions
-
- TO_CONE_TIP - Static variable in class nxopen.geometricutilities.EndHoleData.HoleDepthOptions
-
- TO_CONTAINMENT_GEOMETRY - Static variable in class nxopen.cam.CutParametersExtendAtStartMode
-
To Containment Geometry
- TO_CURVE - Static variable in class nxopen.geometricutilities.StyledSweepReferenceMethodBuilder.ReferenceOptions
-
Curve
- TO_CURVES - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
To curves
- TO_CYLINDER_BOTTOM - Static variable in class nxopen.features.HolePackageBuilder.HoleDepthOptions
-
- TO_CYLINDER_BOTTOM - Static variable in class nxopen.geometricutilities.EndHoleData.HoleDepthOptions
-
- TO_END - Static variable in class nxopen.features.sheetmetal.BendTaperBuilder.BendTaperInputMethod
-
To End
- TO_END - Static variable in class nxopen.features.sheetmetal.ContourFlangeBuilder.SweepTypeOptions
-
- TO_FACE - Static variable in class nxopen.display.DecalBuilder.Scaling
-
scale the decal based on face size
- TO_FILE - Static variable in class nxopen.sim.SimDebugBuilder.OutputType
-
Output to file
- TO_GUIDE - Static variable in class nxopen.geometricutilities.StyledSweepReferenceMethodBuilder.ReferenceOptions
-
Guide
- TO_IMAGE_SIZE - Static variable in class nxopen.display.DecalBuilder.Scaling
-
scale the decal based on true decal image size
- TO_ISOCLINE - Static variable in class nxopen.features.DraftBodyBuilder.MatchingType
-
Match type Isocline
- TO_ITEMS - Static variable in class nxopen.routing.IntegrateRunsBuilder.Button
-
Set as ToItem for selected node in tree list
- TO_NEXT_WALL - Static variable in class nxopen.features.ShelfBuilder.DepthMethods
-
- TO_NON_UNIFORM_SCALE - Static variable in class nxopen.display.DecalBuilder.Scaling
-
scale the decal based on both width and height scale
- TO_OR_FROM_TRIM_POINT_ONLY - Static variable in class nxopen.cam.TurnEngageRetractBuilder.DirectEngageRetractModes
-
Direct engage/retract mode: To/from trim point only
- TO_PLANE - Static variable in class nxopen.facet.ExtrudeFacetBodyBuilder.LimitType
-
Specify the limit by plane object.
- TO_PLATE - Static variable in class nxopen.features.shipdesign.PlateChamferBuilder.Types
-
Create a chamfer on the common edges between plates
- TO_POINT - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
To point
- TO_PREVIOUS_DEPTH - Static variable in class nxopen.cam.BladeCutLevels.HubExtensionsTypes
-
To Previous Depth
- TO_REFERENCE - Static variable in class nxopen.features.sheetmetal.AdvancedFlangeBuilder.Types
-
- TO_SELECTED - Static variable in class nxopen.features.ShelfBuilder.LengthMethods
-
- TO_SELECTED - Static variable in class nxopen.features.StepBuilder.DepthMethods
-
Replaces the motion face with a selected face to produce a step
- TO_START_POSITION - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.FinalRetractTypes
-
Final Retract Type: To start position
- TO_TARGET - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.Types
-
Project on target
- TO_TRAILING_EDGE - Static variable in class nxopen.cam.BladeCutLevels.HubExtensionsTypes
-
To Trailing Edge
- TO_UNIFORM_SCALE - Static variable in class nxopen.display.DecalBuilder.Scaling
-
scale the decal based on uniform scale
- TO_VECTOR - Static variable in class nxopen.geometricutilities.StyledSweepReferenceMethodBuilder.ReferenceOptions
-
Vector Direction
- TO_VIEW - Static variable in class nxopen.drawings.ViewPlacementBuilder.Option
-
Align to the view centers
- toBeDeleted() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the indication if this preparation data should be deleted or not.
- toBeDeleted() - Method in interface nxopen.weld.WeldFillStripBuilder
-
Returns the flag indicating that the strip should be deleted.
- toClipboard() - Method in interface nxopen.gateway.CopyCutBuilder
-
Returns a flag indicating whether copy cut to clipboard or copy cut to a file
License requirements: None.
- toCsys() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the csys that defines the end of transformation of the tool body.
- toCsys() - Method in interface nxopen.geometricutilities.ModlMotion
-
- toCSYS() - Method in interface nxopen.geometricutilities.PatternOrientation
-
Returns the toCSYS, a CSYS for certain pattern type orientation need.
- toCsysList() - Method in interface nxopen.geometricutilities.GeneralPattern
-
Returns the to csys list
License requirements: None.
- toDateItem() - Method in interface nxopen.DateBuilder
-
- toe() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the toe in/out of wheel in degree.
- toe() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the wheel toe in/out in degreee.
- toeSketchData() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the toe sketch data.
- togBlank() - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
Returns the toggle which defines whether the selected component is to be blanked or not
License requirements: routing_harness ("Routing Harness")
.
- TOGGLE - Static variable in class nxopen.blockstyler.Node.ExpandOption
-
Use this option to collapse the expanded node or expand the collapsed node.
- Toggle - Interface in nxopen.blockstyler
-
Represents a Toggle block .
- toggle() - Method in interface nxopen.cam.MultiDepthCut
-
Returns the Multi-Depth Cut
License requirements: None.
- TOGGLE - Static variable in class nxopen.uf.UFUi.MenuType
-
- TOGGLE - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- TOGGLE - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Toggle item
- Toggle - Interface in nxopen.uistyler
-
Represents a Toggle for UI Styler.
- Toggle.ValueChanged - Interface in nxopen.uistyler
-
Called when a dialog user clicks on the button or presses the spacebar when the button has keyboard focus.
- TOGGLE_BUTTON - Static variable in class nxopen.menubar.ContextMenuEntry.Type
-
Displays an On/Off state.
- TOGGLE_BUTTON - Static variable in class nxopen.menubar.MenuButton.Type
-
- toggleAdditionalObjects() - Method in interface nxopen.ame.LoadLineDesignerBuilder
-
Returns the toggle for additional objects
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleBlankComponentsWithAttribute() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the blank components with attribute
License requirements: None.
- toggleCreateSkipWelds() - Method in interface nxopen.weld.FilletBuilder
-
Returns the toggle to create skip welds.
- toggleDescription() - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
Returns the toggle description
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleDiS() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Returns the toggle dis
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- toggleEqualSpacing() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the toggle equal spacing.
- toggleFunction() - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
Returns the toggle function
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleI() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the toggle i
License requirements: None.
- toggleJ() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the toggle j
License requirements: None.
- toggleK() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the toggle k
License requirements: None.
- toggleLabel() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the toggle label
License requirements: None.
- toggleLevel() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the toggle level
License requirements: None.
- toggleListDependents() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the List dependents
License requirements: None.
- toggleListDependents() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the option whether to list dependent components
License requirements: None.
- toggleLocation() - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
Returns the toggle location
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleLongName() - Method in interface nxopen.mechatronics.GanttExportPLCopenBuilder
-
Returns the toggle long name
License requirements: None.
- toggleOpenInEplan() - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
Returns the toggle whether to open EPLAN project after generation
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleOverwrite() - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
Returns the toggle whether to overwrite existing EPLAN project
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleProduct() - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
Returns the toggle product
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleRDS() - Method in interface nxopen.ame.EngineeringObjectDefinitionLabelBuilder
-
Returns the toggle rds
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleRecreateDeletedWelds() - Method in interface nxopen.weld.FilletBuilder
-
Returns the toggle to recreate deleted welds.
- toggleSaveNameChanges() - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
Returns the toggle whether to save the project name changes to EPLAN project settings
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleSavePathChanges() - Method in interface nxopen.ame.EplanProjectGenerationBuilder
-
Returns the toggle whether to save the target path changes to EPLAN project settings
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- toggleShowOnly() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the only show components with attribute toggle
License requirements: None.
- toggleSide() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Returns the toggle side
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- toggleSideArea() - Method in interface nxopen.tooling.CalculateAreaBuilder
-
Returns the toggle side area to indicate calculate side area or not.
- toggleStatus() - Method in interface nxopen.menubar.MenuButton
-
Returns the toggle status of the button.
- toggleStoplight(int) - Method in interface nxopen.uf.UFUi
-
- toggleSymmetricOffset() - Method in interface nxopen.features.shipdesign.SteelVentHolesBuilder
-
Returns the toggle for calculating automatic symmetric offsets.
- toggleSymmetricOffsets() - Method in interface nxopen.features.shipdesign.VentilationHoles2Builder
-
Returns the toggle symmetric offsets
License requirements: None.
- toggleX() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the toggle x
License requirements: None.
- toggleY() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the toggle y
License requirements: None.
- toggleZ() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the toggle z
License requirements: None.
- toindex() - Method in interface nxopen.sim.KinematicSinumerikCaBuilder
-
Returns the TO-index for this automatic protection area
License requirements: None.
- toItems - Variable in class nxopen.uf.UFRouteRun.AskToItemsData
-
- toItemsList() - Method in interface nxopen.routing.DefineRunBuilder
-
Returns the TO items list of the run .
- toJtBody - Variable in class nxopen.uf.UFStd.StlParams
-
- tol - Variable in class nxopen.uf.UFCurve.AskCombineCurvesData
-
- tol - Variable in class nxopen.uf.UFModlFeatures.AskBplaneData
-
- tol - Variable in class nxopen.uf.UFModlFeatures.AskCurveMesh1Data
-
- tol - Variable in class nxopen.uf.UFModlFeatures.AskCurveMeshData
-
- tol - Variable in class nxopen.uf.UFModlFeatures.AskRuledData
-
- tol - Variable in class nxopen.uf.UFModlFeatures.AskSweepData
-
- tol - Variable in class nxopen.uf.UFModlFeatures.AskThruCurves1Data
-
- tol - Variable in class nxopen.uf.UFModlFeatures.AskThruCurvesData
-
- tolAchieved - Variable in class nxopen.uf.UFModlFeatures.CreateReparamSheetData
-
- tolDisplayActDRF() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display the tolerance actual DRF (datum reference frame)
License requirements: None.
- tolDisplayDesDRF() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display the tolerance design DRF (datum reference frame)
License requirements: None.
- tolDisplayDesPoints() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display design points for the features of a tolerance
License requirements: None.
- tolDisplayGauge() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display the gauge in position for a tolerance
License requirements: None.
- tolDisplayMeaPoints() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display measured points for the features of a tolerance
License requirements: None.
- tolDisplayNeedles() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display tolerance deviation needles
License requirements: None.
- tolDisplayPoints() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display points in position for a tolerance
License requirements: None.
- tolDisplayReconstruct() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to display the reconstructed features of a tolerance
License requirements: None.
- tolerance - Variable in class nxopen.annotations.CharacterSpaceFactor
-
Standard Font Character Space Factor for Tolerance Text
- tolerance() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the tolerance in case of bilateral tolerance type otherwise upper tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.annotations.HatchBuilder
-
- tolerance() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.annotations.HatchStyleBuilder
-
Returns the crosshatch and area fill tolerance
License requirements: None.
- TOLERANCE - Static variable in class nxopen.annotations.LineComponent.LineType
-
tolerance line
- tolerance() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the tolerance in case of bilateral tolerance type otherwise upper tolerance
License requirements: None.
- TOLERANCE - Static variable in class nxopen.annotations.TextComponent.TextType
-
tolerance text
- tolerance() - Method in interface nxopen.cae.AutoHealGeometryBuilder
-
Returns the minimum element length tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.cae.CoordinateSelectionRecipe
-
Returns the tolerance.
- tolerance() - Method in interface nxopen.cae.LaminateImportedLayupBuilder
-
Returns the tolerance used to localize each FEM element layup information
License requirements: None.
- tolerance() - Method in interface nxopen.cae.modelcheck.DuplicateNodesCheckBuilder
-
Returns the tolerance used to determine if the nodes are duplicates of each other
License requirements: None.
- tolerance() - Method in interface nxopen.cae.NodeProjectBuilder
-
Returns the projection tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.cae.optimization.TBSShapeLinkCondition
-
Returns the tolerance of symmetrical recognitions
License requirements: None.
- tolerance() - Method in interface nxopen.cae.PointSelectionRecipe
-
Returns the tolerance.
- tolerance() - Method in interface nxopen.cae.ProjectNodesToCadGeometryBuilder
-
Returns the proximity tolerance used to determine if nodes on close enough to be considered on the CAD geometry
License requirements: None.
- TOLERANCE - Static variable in class nxopen.cam.BoundaryTurnMemberOffset.ModeType
-
- tolerance - Variable in class nxopen.cam.CamOperationCircularMotionDataType
-
- tolerance - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- TOLERANCE - Static variable in class nxopen.cam.DmCurveBuilder.DpmcvStepTypes
-
Tolerance
- TOLERANCE - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.DmSurfCutStepTypes
-
Tolerances
- TOLERANCE - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutStepType
-
Tolerances
- TOLERANCE - Static variable in class nxopen.cam.DPMItpBuilder.StepMethodOption
-
- TOLERANCE - Static variable in class nxopen.cam.InspectionAnalyzeBuilder.DofTypes
-
Defined by Tolerance
- TOLERANCE - Static variable in class nxopen.cam.InspectionMethodBuilder.ToleranceDegreeOfFreedomMode
-
From Tolerance Definition
- tolerance - Variable in class nxopen.cam.PreprocessGeometryBuilder.ParameterData
-
tolerance
- tolerance() - Method in interface nxopen.cam.ProbeToleranceParametersBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.cam.ThreadCutParameters
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.display.SelPref
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the value of tolerance, that specifies a chord height tolerance
value for silhouette and hidden line generation in a given
drawing view.
- tolerance() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the tolerance option
License requirements: None.
- tolerance() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the tolerance option on the GENERAL tab of the View Style Dialog
License requirements: None.
- tolerance() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
Returns the angle tolerance toggle on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
- tolerance() - Method in interface nxopen.facet.DecimateFacetBodyBuilder
-
Returns the value indicating maximum chordal deviation from the original facet body.
- tolerance() - Method in interface nxopen.facet.ExtrudeProfileBuilder
-
Returns the tolerance used to create the polyline
License requirements: None.
- tolerance() - Method in interface nxopen.facet.MultiPatchAlignmentBuilder
-
Returns the precision of the alignment.
- tolerance() - Method in interface nxopen.features.BooleanBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.BridgeCurveBuilder
-
- tolerance() - Method in interface nxopen.features.ChamferBuilder
-
Returns the tolerance used for creating chamfer
License requirements: None.
- tolerance() - Method in interface nxopen.features.CompositeCurveBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.DividefaceBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the tolerance of a variable blend
License requirements: None.
- tolerance() - Method in interface nxopen.features.EmbossBuilder
-
Returns the distance tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.ExtensionBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the tolerance for face blend
License requirements: None.
- tolerance() - Method in interface nxopen.features.FillHoleBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.FlowBlendBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the distance tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.IntersectionCurveBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the distance tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.OffsetFacetBodyBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.OffsetSurfaceBuilder
-
Returns the offset surface tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.PatchBuilder
-
Returns the tolerance.
- tolerance() - Method in interface nxopen.features.ProjectCurveBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.RevolveBuilder
-
Returns the revolve tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.SewBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.ShellBuilder
-
Returns the tolerance for the Shell operation.
- tolerance() - Method in interface nxopen.features.shipdesign.ExpansionDrawingBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.shipdesign.MarkingLineBuilder
-
Returns the distance tolerance for marking lines.
- tolerance() - Method in interface nxopen.features.shipdesign.RoomPanelBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.shipdesign.ShellExpansionBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the maximum lateral deviation between input and output.
- tolerance() - Method in interface nxopen.features.SplitBodyBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.ThickenBuilder
-
Returns the tolerance.
- tolerance() - Method in interface nxopen.features.TrimBody2Builder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.TrimExtendBuilder
-
Returns the distance tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.TrimSheetBuilder
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.features.TubeBuilder
-
Returns the distance tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.geometricutilities.CurveFitData
-
Returns the tolerance
License requirements: None.
- tolerance() - Method in interface nxopen.geometricutilities.RefitControlBuilder
-
Returns the tolerance
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- tolerance() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
- tolerance - Variable in class nxopen.motion.PostProcess.EnvelopeTolerance
-
Tolerance value.
- tolerance() - Method in interface nxopen.motion.SplineBeamBuilder
-
Returns the tolerance
License requirements: mechanisms ("MECHANISMS")
.
- tolerance() - Method in interface nxopen.PlotBuilder
-
Returns the plotting tolerance.
- tolerance() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the value of tolerance that specifies a chord height tolerance
value for silhouette and hidden line generation in a given
drawing view.
- tolerance() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the tolerance.
- tolerance() - Method in interface nxopen.routing.ConnectPathBuilder
-
Returns the 3D distance within which Routing.ControlPoints will be considered duplicates
and some will be merged away so that only one Routing.ControlPoint remains.
- tolerance() - Method in interface nxopen.SketchOffsetBuilder
-
Returns the tolerance for approximating offset spline
License requirements: None.
- tolerance() - Method in interface nxopen.SketchProjectBuilder
-
Returns the tolerance value used for the projection.
- tolerance() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the tolerance type
License requirements: None.
- tolerance() - Method in interface nxopen.tooling.FaceSplitBuilder
-
Returns the tolerance is used to do dividing face operation
License requirements: None.
- tolerance - Variable in class nxopen.uf.UFBound.AllData
-
- Tolerance() - Constructor for class nxopen.uf.UFBound.Tolerance
-
- Tolerance(int, double, double) - Constructor for class nxopen.uf.UFBound.Tolerance
-
- tolerance - Variable in class nxopen.uf.UFCgm.ExportOptions
-
- tolerance - Variable in class nxopen.uf.UFCurve.SectionGeneralData
-
- tolerance - Variable in class nxopen.uf.UFDisp.SystemParams
-
- tolerance - Variable in class nxopen.uf.UFDraw.AskBoundaryCurvesData
-
- tolerance - Variable in class nxopen.uf.UFDraw.AskSimplifiedCurveData
-
- tolerance - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- tolerance - Variable in class nxopen.uf.UFDrf.Areafill
-
- tolerance - Variable in class nxopen.uf.UFGdt.CalloutString
-
- tolerance - Variable in class nxopen.uf.UFModeling.AskFeatToleranceData
-
- tolerance - Variable in class nxopen.uf.UFModeling.AskSewSheetBodyData
-
- tolerance - Variable in class nxopen.uf.UFModeling.AskSewSolidBodyData
-
- tolerance - Variable in class nxopen.uf.UFModl.CompareOptions
-
- tolerance - Variable in class nxopen.uf.UFModl.GflangeOptionsData
-
- tolerance - Variable in class nxopen.uf.UFModlFeatures.AskEnlargeData
-
- tolerance - Variable in class nxopen.uf.UFModlFeatures.AskHollowData
-
- tolerance - Variable in class nxopen.uf.UFPath.CircularMotion
-
- tolerance - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- tolerance - Variable in class nxopen.uf.UFPlot.JobOptions
-
- TOLERANCE_ABOVE_DIMENSION - Static variable in class nxopen.uf.UFDrf.TolerancePlacement
-
- TOLERANCE_AFTER_DIMENSION - Static variable in class nxopen.uf.UFDrf.TolerancePlacement
-
- TOLERANCE_AND_VALUE - Static variable in class nxopen.annotations.FitDisplaySplitByDimline
-
Split tolerance and value
- TOLERANCE_BELOW_DIMENSION - Static variable in class nxopen.uf.UFDrf.TolerancePlacement
-
- TOLERANCE_DISPLAY_TYPE - Static variable in class nxopen.uf.UFGdt.LimitsAndFitsDisplayType
-
- TOLERANCE_ONLY - Static variable in class nxopen.annotations.FitDisplaySplitByDimline
-
Split tolerance only
- TOLERANCE_TEXT - Static variable in class nxopen.uf.UFDrf.TextType
-
- TOLERANCE_TO_SMALL - Static variable in class nxopen.uf.UFConstants
-
- TOLERANCE_TOO_SMALL - Static variable in class nxopen.uf.UFConstants
-
- toleranceAngleExpression() - Method in interface nxopen.motion.PackagingMeasureBuilder
-
Returns the Measure angular tolerance expression value
License requirements: mechanisms ("MECHANISMS")
.
- toleranceAngularFormat() - Method in interface nxopen.annotations.UnitsStyleBuilder
-
Returns the tolerance angular format and precision
License requirements: None.
- toleranceCharacterSize() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the tolerance character size
License requirements: None.
- toleranceCoefficient() - Method in interface nxopen.tooling.DieDesPierceInsertBuilder
-
Returns the tolerance coefficient value.
- toleranceColor() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the tolerance color
License requirements: None.
- toleranceCrosshatch() - Method in interface nxopen.annotations.LightweightSectionBuilder
-
Returns the crosshatch adjacency tolerance
License requirements: None.
- toleranceDecimalPlaces() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the number of decimal places for the primary tolerance value of a dimension.
- toleranceDetail() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the tolerance detail option
License requirements: None.
- toleranceDistance() - Method in interface nxopen.cae.FaceFaceImprintBuilder
-
Returns the output stitch option
License requirements: None.
- toleranceExists - Variable in class nxopen.uf.UFModeling.AskFeatToleranceData
-
- toleranceExpression() - Method in interface nxopen.mechatronics.PreferencesBuilder
-
Returns the Tolerance Expression
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- toleranceExpression() - Method in interface nxopen.motion.PackagingMeasureBuilder
-
Returns the Measure tolerance expression value
License requirements: mechanisms ("MECHANISMS")
.
- toleranceExpression - Variable in class nxopen.uf.UFGdt.UnitBasis
-
- toleranceFeatures - Variable in class nxopen.uf.UFGdt.AskFeaturesOfFaceData
-
- toleranceFormat - Variable in class nxopen.uf.UFDrf.AskAngObjUnitsFormatData
-
- toleranceLeadingZero() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the tolerance leading zero display property
License requirements: None.
- toleranceLowerValue() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the tolerance lower value
License requirements: None.
- toleranceMarkup() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the tolerance markup flag
License requirements: None.
- toleranceMCMType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the tolerance mcmenum
License requirements: None.
- toleranceName() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the tolerance defining the DOF limits
License requirements: None.
- toleranceNxTextCharacterSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance NX text character space factor.
- toleranceOffset() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the Tolerance Offset type
License requirements: None.
- toleranceOffsetMode() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the tolerance_offset mode
License requirements: cam_base ("CAM BASE")
.
- tolerancePercent() - Method in interface nxopen.cam.ToolPathDivideBuilder
-
Returns the time limit value
License requirements: None.
- TolerancePlacement - Class in nxopen.annotations
-
Specifies the tolerance text placement relative to the dimension text
- tolerancePlacement() - Method in interface nxopen.annotations.UnitsFormatPreferences
-
Returns the tolerance text placement relative to the dimension text
License requirements: None.
- toleranceRealData - Variable in class nxopen.uf.UFModl.RefitFaceData
-
- tolerances() - Method in interface nxopen.cam.CutParameters
-
Returns the Tolerances builder
License requirements: None.
- TOLERANCES - Static variable in class nxopen.cam.InspectionGraphicalReportBuilder.GraphicalReportFilterType
-
Tolerance based
- tolerances() - Method in interface nxopen.cam.TeachmodeProfileMoveBuilder
-
Returns the Tolerances
License requirements: None.
- tolerances - Variable in class nxopen.uf.UFCambnd.AppData
-
- tolerances - Variable in class nxopen.uf.UFCamgeom.AppData
-
- tolerances - Variable in class nxopen.uf.UFGdt.AskTolerancesData
-
- TOLERANCES_ONLY - Static variable in class nxopen.annotations.FitDisplayStyle
-
Display the tolerance values only
- toleranceStandardTextCharacterSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance Standard text character space factor.
- toleranceSummary() - Method in interface nxopen.cam.InspectionAnalyzeOutputBuilder
-
Returns the tolerance summary option
License requirements: None.
- toleranceText() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the tolerance text
License requirements: None.
- toleranceText - Variable in class nxopen.uf.UFDrf.LetteringPreferences
-
- toleranceTextAspectRatio() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance text aspect ratio.
- toleranceTextCharSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance text character space factor.
- toleranceTextColor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance text color
License requirements: None.
- toleranceTextFont() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance text font
License requirements: None.
- toleranceTextItalicized() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance text italic status
License requirements: None.
- toleranceTextLineSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance text line space factor
License requirements: None.
- toleranceTextLineWidth() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance text line width.
- toleranceTextSize() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance text character size
License requirements: None.
- toleranceTextSpaceFactor() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the tolerance text space factor.
- toleranceTextSymbolAspectRatio() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the symbol aspect ratio for tolerance text (only available for symbols
when using standard font).
- toleranceTextType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the tolerance text enum
License requirements: None.
- toleranceType() - Method in interface nxopen.annotations.AngularTolerance
-
Returns the tolerance type
License requirements: None.
- toleranceType() - Method in interface nxopen.annotations.Dimension
-
Returns a setting to control the tolerance display style.
- toleranceType() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the dimension tolerance type
License requirements: None.
- toleranceType() - Method in interface nxopen.annotations.DraftingSurfaceFinishBuilder
-
Returns the tolerance type applicable only for all the 3 cases of finish type where Material Removal Required
License requirements: None.
- toleranceType() - Method in interface nxopen.annotations.LinearTolerance
-
Returns the tolerance type
License requirements: None.
- toleranceType() - Method in interface nxopen.annotations.SearchCriteriaDimensionBuilder
-
Returns the tolerance type
License requirements: None.
- toleranceType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the tolerance enum
License requirements: None.
- toleranceType() - Method in interface nxopen.annotations.SurfaceFinishBuilder
-
Returns the tolerance type is applicable only where Material Removal is required
License requirements: None.
- ToleranceType - Class in nxopen.annotations
-
Specifies the tolerance type
- toleranceType - Variable in class nxopen.motion.PostProcess.EnvelopeTolerance
-
Indicates if envelopeTolerance is specified as percentage value or absolute value.
- toleranceType - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- toleranceType - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- toleranceUpperValue() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the tolerance upper value
License requirements: None.
- toleranceValue() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the tolerance value string
License requirements: None.
- toleranceValue() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the tolerance value
License requirements: None.
- toleranceValue() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the tolerance value on the GENERAL tab of the View Style Dialog
License requirements: None.
- toleranceValue() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
Returns the angle tolerance data on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
- toleranceValue() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the tolerance value
License requirements: None.
- ToleranceValue() - Constructor for class nxopen.uf.UFGdt.ToleranceValue
-
- ToleranceValue(Tag, double, int) - Constructor for class nxopen.uf.UFGdt.ToleranceValue
-
- toleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- toleranceValueDp - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- toleranceValuePrecision() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the tolerance value precision
License requirements: None.
- toleranceValueSource() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the GDT Tolerance Value Source
License requirements: None.
- ToleranceZone() - Constructor for class nxopen.uf.UFGdt.ToleranceZone
-
- ToleranceZone(UFGdt.ZoneShape, Tag, Tag, double, int, UFGdt.MaterialModifier) - Constructor for class nxopen.uf.UFGdt.ToleranceZone
-
- toleranceZoneShape() - Method in interface nxopen.annotations.FcfFrame
-
- ToleranceZoneShape - Class in nxopen.annotations
-
Specifies the tolerance zone shape
- tolerantMachining() - Method in interface nxopen.cam.MillCutParameters
-
Returns the tolerant machining status
License requirements: None.
- tolerantPositioning() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the option to allow tolerant (imprecise) geometry selection for assembly positioning
License requirements: None.
- tolFormat - Variable in class nxopen.uf.UFGdt.DepthTolerance
-
- tolGrade - Variable in class nxopen.uf.UFGdt.LimitsAndFitsData
-
- tolHighlightNominal() - Method in interface nxopen.cam.InspectionMeasDataBuilder
-
Returns the option to highlight nominal faces for a tolerance
License requirements: None.
- toLocationList() - Method in interface nxopen.geometricutilities.BetweenLocationsData
-
Returns the to location list
License requirements: None.
- tolOpType() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the tolerance type
License requirements: None.
- tols - Variable in class nxopen.uf.UFCurve.AskJoinedParmsData
-
- tols - Variable in class nxopen.uf.UFModl.SnipsrfFeatureData
-
- tols - Variable in class nxopen.uf.UFModlFeatures.AskRuled1Data
-
- tolSetting() - Method in interface nxopen.tooling.TraverseLoopBuilder
-
Returns the chaining tolerance.
- tolSpecified - Variable in class nxopen.uf.UFBound.Tolerance
-
- TOMCD - Static variable in class nxopen.mechatronics.SHMSignalConnectionBuilder.StreamIOType
-
write to MCD
- toObject - Variable in class nxopen.uf.UFModl.DfoConstraint
-
- TOOL - Static variable in class nxopen.cam.CAMSession.ObjectSubtype
-
Machine Tools and Cutters
- TOOL - Static variable in class nxopen.cam.CircularAboutAxisMoveBuilder.AxisType
-
Tool Axis
- TOOL - Static variable in class nxopen.cam.DmRadBuilder.RadStepoverTypeType
-
Tool Diameter
- TOOL - Static variable in class nxopen.cam.PathDisplay.ColorByType
-
- TOOL - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MaximumAreaModes
-
Tool
- TOOL - Static variable in class nxopen.cam.RoughFinishTurningBuilder.MinimumAreaTypes
-
Tool
- TOOL - Static variable in class nxopen.cam.SimulationOptionsBuilder.Stationary
-
use tool stationary
- Tool - Interface in nxopen.cam
-
Represents a NC group
To obtain an instance of this class use
NCGroupCollection
Created in NX5.0.0
- tool() - Method in interface nxopen.features.BooleanBuilder
-
- tool() - Method in interface nxopen.features.IBoolean
-
- tool() - Method in interface nxopen.features.PatchBuilder
-
Returns the tool.
- tool() - Method in interface nxopen.features.RPODimension
-
Returns the tool of the dimension.
- tool() - Method in interface nxopen.features.TrimBodyBuilder
-
Returns the tool of the trim body feature
License requirements: None.
- tool() - Method in interface nxopen.PositioningDimension
-
Returns
the tool entity.
- TOOL - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Tool classification
- tool - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData
-
- tool - Variable in class nxopen.uf.UFModeling.AskHorzDimeData
-
- tool - Variable in class nxopen.uf.UFModeling.AskParaDistData
-
- tool - Variable in class nxopen.uf.UFModeling.AskParaEdgeData
-
- tool - Variable in class nxopen.uf.UFModeling.AskPerpDistData
-
- tool - Variable in class nxopen.uf.UFModeling.AskVertDimeData
-
- Tool.Subtypes - Class in nxopen.cam
-
Tool subtypes
- Tool.TypeAndSubtypeData - Class in nxopen.cam
-
- Tool.Types - Class in nxopen.cam
-
Tool types
- TOOL2D - Static variable in class nxopen.cam.DisplayTool.ToolDisplayTypes
-
Tool Display: 2D
- TOOL2D - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.ToolDisplayTypes
-
Tool Display: 2D
- TOOL3D - Static variable in class nxopen.cam.DisplayTool.ToolDisplayTypes
-
Tool Display: 3D
- TOOL3D - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.ToolDisplayTypes
-
Tool Display: 3D
- TOOL_AXIS_CLEARANCE - Static variable in class nxopen.cam.NcmTransferBuilder.AppDepMethodTypes
-
along tool axis from/to clearance
- TOOL_BODY - Static variable in class nxopen.preferences.SessionModeling.BooleanFacePropertiesInheritance
-
Indicates that display of boolean face properties inherits from tool body
- TOOL_BODY - Static variable in class nxopen.uf.UFModl.BooleanBody
-
- TOOL_CHANGE_MARKER - Static variable in class nxopen.cam.ToolpathEventType
-
- TOOL_CLASS_CATALOG_NUMBER - Static variable in class nxopen.uf.UFSim.ToolClass
-
- TOOL_CLASS_COMP_NAME - Static variable in class nxopen.uf.UFSim.ToolClass
-
- TOOL_CLASS_LIBRARY_REF - Static variable in class nxopen.uf.UFSim.ToolClass
-
- TOOL_CLASS_TOOL_NUMBER - Static variable in class nxopen.uf.UFSim.ToolClass
-
- TOOL_CLASS_UG_NAME - Static variable in class nxopen.uf.UFSim.ToolClass
-
- TOOL_CUTTING - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Tool Cutting classification
- TOOL_DEP - Static variable in class nxopen.cam.ParamValueIntent
-
value is percent of tool
- TOOL_DIAMETER - Static variable in class nxopen.cam.DimensionRule.Types
-
Tool Diameter Percentage
- TOOL_DIAMETER - Static variable in class nxopen.cam.DmSpiralBuilder.DmSpiralStepoverTypes
-
Tool diameter percentage
- TOOL_MAGAZINE - Static variable in class nxopen.cam.ConvertFromMCDBuilder.PocketLocationTypes
-
- TOOL_MARKER - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectType
-
- TOOL_MARKER - Static variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectType
-
- TOOL_MARKER - Static variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectType
-
- TOOL_NON_CUTTING - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
- TOOL_PALETTE - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- TOOL_PALETTE - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Tool Palette item
- TOOL_PARAMETERS - Static variable in class nxopen.cam.GougeCheckBuilder.ToolShapeType
-
use tool parameters
- TOOL_PART - Static variable in class nxopen.tooling.ClearanceManagementBuilder.Selection
-
- TOOL_PATH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Tool Path
- TOOL_PATH_PICKING - Static variable in class nxopen.sim.SimDebugBuilder.TraceType
-
Trace ToolPath Picking
- TOOL_PATH_SIMULATION - Static variable in class nxopen.sim.IsvControlPanelBuilder.VisualizationType
-
Tool Path Simulate
- TOOL_POSITION_ON - Static variable in class nxopen.uf.UFCam.ToolPosition
-
- TOOL_POSITION_TANTO - Static variable in class nxopen.uf.UFCam.ToolPosition
-
- TOOL_POSITION_UNDEFINED - Static variable in class nxopen.uf.UFCam.ToolPosition
-
- TOOL_RADIUS - Static variable in class nxopen.cam.TurnConcaveCornerControl.RadiusOptions
-
Concave Corner Control radius option is Tool Radius.
- TOOL_SHOULDER - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthReferenceTypes
-
Depth Reference options: Tool Shoulder
- TOOL_TABLE - Static variable in class nxopen.preferences.PartSheetmetal.BendDefinitionMethodOptions
-
The tool table method
- TOOL_TIP - Static variable in class nxopen.cam.CenterlineDrillTurningBuilder.DepthReferenceTypes
-
Depth Reference options: Tool Tip
- TOOL_TIP - Static variable in class nxopen.cam.HoleMakingBuilder.ControlPointTypes
-
tool tip
- TOOL_TIP - Static variable in class nxopen.sim.KinematicJunctionBuilder.SystemClass
-
The tool tip junction
- TOOL_ZERO - Static variable in class nxopen.sim.KinematicJunctionBuilder.SystemClass
-
the tool mounting point
- toolAngle - Variable in class nxopen.uf.UFPath.ToolChange
-
- toolAngleRadiusFlag - Variable in class nxopen.uf.UFPath.ToolChange
-
- ToolAssembly - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner tool assembly
To obtain an instance of this class use (not yet implemented!)
- toolAssociativity() - Method in interface nxopen.features.RPODimension
-
Returns the tool associativity.
- toolAxis - Variable in class nxopen.cam.CamOperationCircularMotionDataType
-
- toolAxis - Variable in class nxopen.cam.CamOperationHelicalMotionDataType
-
- toolAxis - Variable in class nxopen.cam.CamOperationLinearMotionDataType
-
- toolAxis - Variable in class nxopen.cam.CamOperationMotionPosType
-
- toolAxis() - Method in interface nxopen.cam.HoleBossSet
-
Returns the Tool Axis
License requirements: None.
- toolAxis() - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
Returns the avoidance tool axis
License requirements: None.
- toolAxis() - Method in interface nxopen.cam.PathLinearMotion
-
Returns the tool axis of the motion
License requirements: None.
- toolAxis() - Method in interface nxopen.cam.PmopToolAxisCiBuilder
-
Returns the tool axis type
License requirements: None.
- toolAxis() - Method in interface nxopen.cam.SurfaceContourBuilder
-
- toolAxis() - Method in interface nxopen.cam.ToolAxisCiBuilder
-
Returns the tool axis types
License requirements: None.
- toolAxis() - Method in interface nxopen.die.UncutRegionsBuilder
-
Returns the tool axis.
- toolAxis() - Method in interface nxopen.geometricutilities.ExtrudeRevolveToolBuilder
-
Returns the tool axis used for doing revolve
License requirements: None.
- toolAxis - Variable in class nxopen.uf.UFPath.LevelMarker
-
- toolAxis - Variable in class nxopen.uf.UFPath.LinearMotion
-
- toolAxisAdvanced() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the tool axis advanced builder
License requirements: None.
- ToolAxisAdvanced - Interface in nxopen.cam
-
Represents a Tool Axis Advanced Builder .
- ToolAxisAdvanced.RotateAboutType - Class in nxopen.cam
-
Rotate About type
- ToolAxisAdvanced.Type - Class in nxopen.cam
-
Available types for Tool Axis Advanced type
- toolAxisAsArcAxis() - Method in interface nxopen.cam.DrillGeomBuilder
-
Returns the Tool Axis as Arc Axis
License requirements: cam_base ("CAM BASE")
.
- ToolAxisBase - Interface in nxopen.cam
-
Represents a tool axis ci Builder .
- toolAxisChange() - Method in interface nxopen.cam.MillCutParameters
-
Returns the tool axis change
License requirements: None.
- ToolAxisChange - Interface in nxopen.cam
-
- toolAxisChange() - Method in interface nxopen.cam.ToolPathTiltBuilder
-
- ToolAxisChange.MethodTypes - Class in nxopen.cam
-
Available types for tool axis change method
- ToolAxisCiBuilder - Interface in nxopen.cam
-
Represents a tool axis ci Builder .
- toolAxisFix() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the pmop tool axis ci builder
License requirements: None.
- toolAxisFixed() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Tool Axis Fixed builder
License requirements: None.
- ToolAxisFixed - Interface in nxopen.cam
-
Represents a Tool Axis Fixed Builder .
- ToolAxisFixed.Types - Class in nxopen.cam
-
Available types for Tool Axis Fixed
- ToolAxisInterpolate - Interface in nxopen.cam
-
Represents a Tool Axis Interpolate Builder .
- ToolAxisInterpolate.ControlDirectionTypes - Class in nxopen.cam
-
the available types for the control direction
- ToolAxisInterpolate.InterpolateTypes - Class in nxopen.cam
-
the available types for Interpolate Types
- ToolAxisInterpolate.InterpolationMethodTypes - Class in nxopen.cam
-
the available types for interpolate method
- ToolAxisInterpolate.TurnInputModeTypes - Class in nxopen.cam
-
the available types for turn input mode
- ToolAxisInterpolate.TurnInterpolationMethodTypes - Class in nxopen.cam
-
the available types for turn interpolation method
- toolAxisSmoothing() - Method in interface nxopen.cam.MillCutParameters
-
Returns the degree of tool axis smoothing
License requirements: None.
- toolAxisStatus() - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
Returns the tool axis status
License requirements: None.
- toolAxisTilt() - Method in interface nxopen.cam.MillCutParameters
-
Returns the tool axis tilt
License requirements: None.
- ToolAxisTilt - Interface in nxopen.cam
-
Represents a builder for an inheritable double value in of a CAM.CAMObject
Created in NX6.0.0
- ToolAxisTilt.TiltAngleTypes - Class in nxopen.cam
-
Available types for auto tilt
- ToolAxisTilt.Types - Class in nxopen.cam
-
Available types for tool axis tilt control
- toolAxisType() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the tool axis mode
License requirements: None.
- toolAxisType() - Method in interface nxopen.cam.Path
-
Returns the tool axis type of the path
License requirements: None.
- toolAxisType() - Method in interface nxopen.cam.ProbeInspectSurfacePointMoveBuilder
-
Returns the probe axis type
License requirements: None.
- toolAxisType() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the tool axis types
License requirements: None.
- toolAxisType() - Method in interface nxopen.cam.ToolAxisFixed
-
Returns the tool axis types
License requirements: None.
- toolAxisType() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the tool axis type
License requirements: None.
- toolAxisUsage() - Method in interface nxopen.cam.NcmAvoidancePointBuilder
-
Returns the tool axis usage
License requirements: None.
- toolAxisVariable() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the Tool Axis Variable builder
License requirements: None.
- ToolAxisVariable - Interface in nxopen.cam
-
Represents a Tool Axis Variable Builder .
- ToolAxisVariable.MaximumLeadAngleTypes - Class in nxopen.cam
-
Available types for Maximum Lead Angle
- ToolAxisVariable.NominalLeadAngleTypes - Class in nxopen.cam
-
Available types for Nominal Lead Angle
- ToolAxisVariable.RulingTypes - Class in nxopen.cam
-
Available types for Ruling
- ToolAxisVariable.Types - Class in nxopen.cam
-
Available types for Tool Axis Variable
- toolAxisVector() - Method in interface nxopen.cam.DrillGeomBuilder
-
Returns the Tool Axis vector
License requirements: cam_base ("CAM BASE")
.
- toolAxisVector() - Method in interface nxopen.cam.HoleMakingBuilder
-
Returns the tool axis vector
License requirements: None.
- toolAxisVector() - Method in interface nxopen.cam.OrientGeomBuilder
-
Returns the tool axis vector
License requirements: cam_base ("CAM BASE")
.
- toolBodies() - Method in interface nxopen.features.SewBuilder
-
Returns the tool sheet bodies
License requirements: None.
- toolBodies() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the selected tool body for split.
- toolBody() - Method in interface nxopen.features.AssemblyCutBuilder
-
Returns the tool body
License requirements: None.
- toolBody() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the tool body
License requirements: None.
- toolBody() - Method in interface nxopen.features.MasterCutBuilder
-
Returns the tool body used to perform the cut, which is an extruded body
License requirements: solid_modeling ("SOLIDS MODELING")
.
- toolBody() - Method in interface nxopen.features.PasteFaceBuilder
-
Returns the collector holding the tool bodies.
- toolBody() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the tool body
License requirements: None.
- toolBody() - Method in interface nxopen.features.SweptVolumeBuilder
-
Returns the tool body
License requirements: None.
- toolBody - Variable in class nxopen.uf.UFModl.SolidPunchData
-
- toolBodyCollector() - Method in interface nxopen.features.BooleanBuilder
-
Returns the tool body collector for the boolean operation
License requirements: None.
- toolBodyTags - Variable in class nxopen.uf.UFAssem.AskBodiesOfAssemblyCutData
-
- ToolBuilder - Interface in nxopen.cam
-
Represents a Tool Builder
This is an abstract class, and cannot be instantiated.
- ToolBuilder.MaterialData - Class in nxopen.cam
-
- toolCarrierName() - Method in interface nxopen.sim.MachineToolConfiguration
-
Returns the tool carrier name
License requirements: None.
- toolCenter - Variable in class nxopen.uf.UFModl.SmpunchData
-
- ToolChange() - Constructor for class nxopen.uf.UFPath.ToolChange
-
- ToolChange(double, double, double, double, double, int, int, UFPath.HeadType, boolean, boolean, boolean, boolean, boolean) - Constructor for class nxopen.uf.UFPath.ToolChange
-
- ToolChangeCiBuilder - Interface in nxopen.cam
-
Represents a ToolChangeCiBuilder .
- ToolChangeCiBuilder.HeadDesignationTypes - Class in nxopen.cam
-
Available types for head designation type
- ToolChangePositionBuilder - Interface in nxopen.cam
-
- toolChangesAtSafePlane() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to do tool changes at safe plane
License requirements: None.
- toolChangeSetting() - Method in interface nxopen.cam.OperationBuilder
-
Returns the tool change builder
License requirements: None.
- toolChangeTime() - Method in interface nxopen.cam.MachineGroupBuilder
-
Returns the Tool Change Time
License requirements: None.
- toolCollector() - Method in interface nxopen.features.TrimExtendBuilder
-
Returns the tool collector tool selection to specify the tool for a trim or extend operation
License requirements: None.
- toolContactShift() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the tool contact shift
License requirements: None.
- toolCsysPt - Variable in class nxopen.uf.UFModl.SolidPunchData
-
- toolCurve() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the tool curve which used to split the standard part.
- toolCurves() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
- toolCurves() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the tool curve(s) to create extrude face for split.
- toolCurvesSection() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the tool curve(s) to create extrude face for split.
- ToolDesignerApplicationBuilder - Interface in nxopen.tooldesigner
-
Represents a class to create enter and exit the ToolDesigner application
.
- toolDiameter() - Method in interface nxopen.cam.StockPerPassBuilder
-
Returns the Tool Diameter.
- toolDiameterPercent() - Method in interface nxopen.cam.CornerControlBuilder
-
Returns the tool diameter percent.
- toolDirection() - Method in interface nxopen.geometricutilities.ExtrudeRevolveToolBuilder
-
Returns the tool direction used for doing extrude
License requirements: None.
- toolDirectionBuilder() - Method in interface nxopen.cam.FeedsBuilder
-
Returns the tool_direction builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- toolDirectionBuilder() - Method in interface nxopen.cam.FeedsTurnBuilder
-
Returns the tool_direction builder (inheritable Int)
License requirements: cam_base ("CAM BASE")
.
- toolDisplay() - Method in interface nxopen.cam.MethodBuilder
-
Returns the sub builder for tool display
License requirements: None.
- toolDisplay() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the sub builder for tool display
License requirements: None.
- toolDisplayFrequency() - Method in interface nxopen.cam.DisplayTool
-
Returns the tool display frequency
License requirements: None.
- toolDisplayFrequency() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the tool display frequency
License requirements: None.
- toolDisplayType() - Method in interface nxopen.cam.DisplayTool
-
Returns the tool display types
License requirements: None.
- toolDisplayType() - Method in interface nxopen.cam.OperationDisplayOptionsBuilder
-
Returns the tool display types
License requirements: None.
- toolEmbossDirection() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the tool emboss direction
License requirements: None.
- toolEnd - Variable in class nxopen.cam.CamOperationMotionPosType
-
- toolExtendDistance() - Method in interface nxopen.features.TrimExtendBuilder
-
Returns the tool extend distance
License requirements: None.
- toolFace() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the faces used to trim an ejector pin.
- toolFace() - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
Returns the tool face used to trim the target bodies.
- toolFace - Variable in class nxopen.uf.UFModlFeatures.AskReplaceFaceData
-
- toolFaceEid - Variable in class nxopen.uf.UFModeling.AskLinkFacesData
-
- toolFacePlane() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the tool face or plane used to split the standard part.
- toolFaces() - Method in interface nxopen.features.SewBuilder
-
Returns the tool solid faces
License requirements: None.
- toolFaces() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
- toolFaces() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the selected tool datum or face(s) for split.
- toolFaces() - Method in interface nxopen.geometricutilities.FacePlaneToolBuilder
-
Returns the sets of tool faces or datum planes
License requirements: None.
- toolFaces - Variable in class nxopen.uf.UFModeling.AskSewSolidBodyData
-
- toolFacesCount - Variable in class nxopen.uf.UFModeling.AskSewSolidBodyData
-
- toolGroup() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the tool group
License requirements: None.
- toolHolderAngle() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the Tool Holder Angle
License requirements: None.
- toolHolderAngle() - Method in interface nxopen.cam.TurnToolProbingBuilder
-
Returns the Tool Holder Angle
License requirements: None.
- TOOLING_NAME_RULE - Static variable in class nxopen.tooling.RenameAndExportComponentBuilder.NamingRuleType
-
- TOOLING_TEMPLATE - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.DialogOptions
-
tooling template part
- ToolingApplication - Class in nxopen.tooling
-
Wizard type, some of them should be same as in mpdwshare_uf_mold.h
- ToolingBox - Interface in nxopen.features
-
Represents a tooling box feature
To create or edit an instance of this class, use
ToolingBoxBuilder
Created in NX10.0.0
- ToolingBoxBuilder - Interface in nxopen.features
-
- ToolingBoxBuilder.RefCsysType - Class in nxopen.features
-
the type of reference csys for box feature
- ToolingBoxBuilder.Types - Class in nxopen.features
-
the type for box feature
- ToolingCloneaction - Class in nxopen.tooling
-
Clone action type
- ToolingClonemethod - Class in nxopen.tooling
-
Clone method
- ToolingCloneparttype - Class in nxopen.tooling
-
Part file type, .sim, .fem etc.
- toolingCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the ToolingCollection instance belonging to this part .
- ToolingCollection - Interface in nxopen.features
-
This class contains the factory method for creating tooling feature builder.
- toolingDrawing() - Method in interface nxopen.tooling.ToolingManager
-
Returns the ToolingDrawingCollection instance belonging to this part .
- ToolingDrawingCollection - Interface in nxopen.tooling
-
- toolingFeatureCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the ToolingFeatureCollection instance belonging to this part .
- ToolingFeatureCollection - Interface in nxopen.features
-
This class contains the factory method for creating tooling feature builder.
- toolingFindObject(String) - Method in interface nxopen.features.ToolingCollection
-
Finds the nxopen.Features
with the given identifier as
recorded in a journal.
- toolingManager() - Method in interface nxopen.Part
-
Returns the ToolingManager instance belonging to this part .
- ToolingManager - Interface in nxopen.tooling
-
Contains the collection objects for creating and iterating over Reuse Library objects.
- toolingNameRule() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the tooling name rule
License requirements: None.
- toolingSession() - Method in interface nxopen.Session
-
Returns the
ToolingSession
belonging to this session
Created in NX8.0.0
- ToolingSession - Interface in nxopen.tooling
-
Represents Tooling session
To obtain an instance of this class, refer to
Session
Created in NX8.0.0
- toolListProgramGroup() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the selected Program Group for Tool List
License requirements: None.
- toolMagazine() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the tool magazine
License requirements: None.
- toolMinimumLengthUsage() - Method in interface nxopen.cam.PlanarOperationBuilder
-
Returns the tool minimum length usage
License requirements: None.
- toolMountingJunction() - Method in interface nxopen.cam.ManageToolPartBuilder
-
Returns the tool mounting junction
License requirements: None.
- toolName() - Method in interface nxopen.cam.InspectionCmmCommandBuilder
-
Returns the tool name
License requirements: None.
- toolName() - Method in interface nxopen.cam.InspectionSensorBuilder
-
Returns the inspection probe tool name
License requirements: None.
- toolNewPlane() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the created new tool datum for split.
- toolNumber - Variable in class nxopen.uf.UFPath.ToolChange
-
- toolNumberFlag - Variable in class nxopen.uf.UFPath.ToolChange
-
- toolOffset() - Method in interface nxopen.cam.ProbeCalibrateLengthMoveBuilder
-
Returns the tool offset register
License requirements: None.
- toolOffset() - Method in interface nxopen.cam.ProbeCalibrateSphereMoveBuilder
-
Returns the tool offset to update
License requirements: None.
- toolOffset() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the tool offset to update
License requirements: None.
- toolOffsetFlag - Variable in class nxopen.uf.UFPath.ToolChange
-
- toolOption() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
Returns the tool type method that indicates which kind of tools will be used to construct the splitting sheet body.
- toolOption() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the tool type for split.
- toolOption() - Method in interface nxopen.features.UnsewBuilder
-
Returns the tool option
License requirements: None.
- toolOption() - Method in interface nxopen.geometricutilities.BooleanToolBuilder
-
Returns the boolean tool option
License requirements: None.
- toolOption() - Method in interface nxopen.geometricutilities.SelectDividingObjectBuilder
-
Returns the tool option
License requirements: None.
- toolOption() - Method in interface nxopen.tooling.SplitSolidBuilder
-
Returns the tool object selection option
License requirements: None.
- ToolPalette - Interface in nxopen.uistyler
-
Represents a ToolPalette for UI Styler .
- ToolPalette.Activate - Interface in nxopen.uistyler
-
Called when a dialog user selects a button in the tool palette.
- toolPartOrTargetPart() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the tool part or target part.
- toolPath() - Method in interface nxopen.features.SweptVolumeBuilder
-
Returns the tool path
License requirements: None.
- ToolPathDivideBuilder - Interface in nxopen.cam
-
- ToolPathDivideBuilder.PathDivideType - Class in nxopen.cam
-
Divide type options
- toolpathEdited - Variable in class nxopen.uf.UFOper.Status
-
- toolpathEdited - Variable in class nxopen.uf.UFOper.Status1
-
- toolPathEditor() - Method in interface nxopen.cam.OperationBuilder
-
Returns the Tool Path Editor Builder
License requirements: None.
- ToolPathEditorBuilder - Interface in nxopen.cam
-
- ToolPathEditorBuilder.ClearanceMethodType - Class in nxopen.cam
-
Clearance Method Type
- ToolPathEditorBuilder.ConnectionMethodType - Class in nxopen.cam
-
Connection Method Type
- ToolPathEditorBuilder.ExtendMethodType - Class in nxopen.cam
-
Extend Method Type
- ToolPathEditorBuilder.MotionMethodType - Class in nxopen.cam
-
Motion Method Type
- ToolPathEditorBuilder.TrimGeometryType - Class in nxopen.cam
-
Trim Geometry Type
- ToolPathEditorBuilder.TrimMethod - Class in nxopen.cam
-
Trim Method
- ToolPathEditorBuilder.TrimPathType - Class in nxopen.cam
-
Trim Path Type
- ToolPathEditorBuilder.TrimSideType - Class in nxopen.cam
-
Trim Side Type
- ToolpathEventType - Class in nxopen.cam
-
Types of tool path events
- toolpathExists - Variable in class nxopen.uf.UFOper.Status
-
- toolpathExists - Variable in class nxopen.uf.UFOper.Status1
-
- toolpathOnly - Variable in class nxopen.uf.UFCam.Preferences
-
- toolpathSmoothing() - Method in interface nxopen.cam.MillCutParameters
-
Returns the degree of tool path smoothing
License requirements: None.
- ToolPathSplitBuilder - Interface in nxopen.cam
-
- ToolPathSplitBuilder.SplitTypes - Class in nxopen.cam
-
Divide type options
- ToolPathSplitBuilder.TransferTypes - Class in nxopen.cam
-
Transfer type options
- ToolPathSplitBuilder.TransferUsingMethods - Class in nxopen.cam
-
Transfer using options
- ToolPathSplitItemBuilder - Interface in nxopen.cam
-
Represents a ToolPathSplitItem builder
Use the
ToolPathSplitBuilder
class to create a ToolPathSplitItemBuilder object.
- ToolPathSplitItemBuilderList - Interface in nxopen.cam
-
Represents a list of objects.
- toolPathSplitParametersBuilder() - Method in interface nxopen.cam.OperationBuilder
-
Returns the tool path split Parameters
License requirements: None.
- toolPathSplitParametersBuilder() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
Returns the tool path split parameters
License requirements: None.
- ToolPathSplitParametersBuilder - Interface in nxopen.cam
-
Represents the Divide Parameters
This object is owned by another builder.
- ToolPathSplitParametersBuilder.SplitTypes - Class in nxopen.cam
-
Divide type options
- ToolPathSplitParametersBuilder.TransferTypes - Class in nxopen.cam
-
Transfer type options
- ToolPathSplitParametersBuilder.TransferUsingMethods - Class in nxopen.cam
-
Transfer using options
- ToolPathTiltAvoidance - Interface in nxopen.cam
-
Represents a Tool Path Tilt Avoidance Builder
This is a sub-builder class and cannot be directly instantiated
.
- ToolPathTiltAvoidance.AxisType - Class in nxopen.cam
-
the tilting axis type
- ToolPathTiltAvoidance.MethodType - Class in nxopen.cam
-
the collision avoidance method type
- ToolPathTiltBuilder - Interface in nxopen.cam
-
- ToolPathTiltClearance - Interface in nxopen.cam
-
Represents a Tool Path Tilt Clearance Builder
This is a sub-builder class and cannot be directly instantiated
.
- ToolPathTiltMachine - Interface in nxopen.cam
-
Represents a Tool Path Tilt Machine Builder
This is a sub-builder class and cannot be directly instantiated
.
- ToolPathTiltMachine.ToolMainMcsTypes - Class in nxopen.cam
-
the main tool rotation MCS options
- ToolPathTiltTilting - Interface in nxopen.cam
-
Represents a Tool Path Tilt Tilting Builder
This is a sub-builder class and cannot be directly instantiated
.
- ToolPathTiltTilting.AxisType - Class in nxopen.cam
-
the tilting axis type
- ToolPathTiltTilting.ManualTiltTypes - Class in nxopen.cam
-
the manual tilt
- ToolPathTiltTilting.ReferenceTypes - Class in nxopen.cam
-
the tilting reference type
- ToolPathTiltTilting.ToolAxisTiltingDistTypes - Class in nxopen.cam
-
the tool distance type options
- ToolPathTiltTilting.ToolAxisTiltingRuleTypes - Class in nxopen.cam
-
the tool tilting rule options
- ToolPathTiltTilting.ToolAxisTypes - Class in nxopen.cam
-
the tool axis mode options
- toolPlane() - Method in interface nxopen.geometricutilities.FacePlaneToolBuilder
-
Returns the new plane created on the fly.
- toolPoint() - Method in interface nxopen.features.RPODimension
-
Returns the tool point of dimension.
- toolPosition() - Method in interface nxopen.cam.BoundaryMemberSetPlanarMill
-
Returns the tool position
License requirements: None.
- toolPosition() - Method in interface nxopen.cam.BoundarySet
-
Returns the tool position
License requirements: None.
- toolPosition() - Method in interface nxopen.cam.DmToolPosition
-
- toolPosition() - Method in interface nxopen.cam.DPMItpBuilder
-
- toolPosition() - Method in interface nxopen.cam.GuidedCurveBuilder
-
Returns the Tool Position
License requirements: None.
- toolPosition - Variable in class nxopen.uf.UFCambnd.AppData
-
- toolPositionBuilder() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the tool position builder
License requirements: None.
- toolPositioning() - Method in interface nxopen.cam.RotaryPointMoveBuilder
-
Returns the tool positioning builder
License requirements: None.
- ToolPositioningBuilder - Interface in nxopen.cam
-
Represents the Tool Positioning Builder .
- ToolPositioningBuilder.ToolPositioning - Class in nxopen.cam
-
the tool positioning options
- toolPositioningMethod() - Method in interface nxopen.cam.ToolPositioningBuilder
-
Returns the tool positioning method
License requirements: None.
- toolPositionOffsetBuilder() - Method in interface nxopen.cam.DmCmBuilder
-
Returns the part stock builder (inheritable double)
License requirements: None.
- toolPositionType() - Method in interface nxopen.cam.DmToolPosition
-
Returns the tool position used for common block
License requirements: None.
- toolReversed() - Method in interface nxopen.features.TrimExtendBuilder
-
Returns the target material side direction , toolReversed = true, means tool direction is reversed
License requirements: None.
- toolRunOff() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Tool Run Off
License requirements: None.
- toolRunOffType() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Tool Run Off Type
License requirements: None.
- toolRunOn() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Tool Run On
License requirements: None.
- tools() - Method in interface nxopen.features.BooleanBuilder
-
- TOOLS - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.Types
-
tools
- toolSection() - Method in interface nxopen.geometricutilities.ExtrudeRevolveToolBuilder
-
Returns the tool super section
License requirements: None.
- toolSelect() - Method in interface nxopen.features.shipdesign.PlateDivideBuilder
-
Returns the tools selected for imprint.
- toolSelection() - Method in interface nxopen.features.TrimAndExtendBuilder
-
Returns the tool collector which contains either edges or faces
License requirements: None.
- ToolSet - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner tool set
To obtain an instance of this class use GetToolSet of ToolAssembly.
- toolSetupSheet() - Method in interface nxopen.cam.WorkInstructionBuilder
-
Returns the selected tool setup sheet
License requirements: None.
- toolShape() - Method in interface nxopen.cam.GougeCheckBuilder
-
Returns the tool shape.
- toolSheet - Variable in class nxopen.uf.UFModeling.AskPatchBodyParmsData
-
- toolSheetBodies - Variable in class nxopen.uf.UFModeling.AskSewSheetBodyData
-
- toolSheetBodiesCount - Variable in class nxopen.uf.UFModeling.AskSewSheetBodyData
-
- toolSheetBody() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the sheet body used to trim an ejector pin.
- toolSheetBody() - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
Returns the tool sheet body used to trim the target bodies.
- toolSide() - Method in interface nxopen.cam.BoundarySet
-
Returns the tool side
License requirements: None.
- toolSide() - Method in interface nxopen.cam.LaserProfileMove
-
Returns the Tool Side
License requirements: None.
- toolSize() - Method in interface nxopen.die.UncutRegionsBuilder
-
Returns the expression that contains the tool radius.
- toolString() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the tool to use for inspection
License requirements: None.
- toolString() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the tool to use for inspection string
License requirements: None.
- toolTiltMethodType() - Method in interface nxopen.cam.ToolPathTiltTilting
-
Returns the tilting type
License requirements: None.
- toolTip() - Method in interface nxopen.blockstyler.BodyCollector
-
Returns the ToolTip
License requirements: None.
- tooltip() - Method in interface nxopen.blockstyler.Button
-
Returns the Tooltip
License requirements: None.
- toolTip() - Method in interface nxopen.blockstyler.CurveCollector
-
Returns the ToolTip
License requirements: None.
- toolTip() - Method in interface nxopen.blockstyler.FaceCollector
-
Returns the ToolTip
License requirements: None.
- tooltip() - Method in interface nxopen.blockstyler.Label
-
Returns the Tooltip
License requirements: None.
- toolTip() - Method in interface nxopen.blockstyler.SectionBuilder
-
Returns the ToolTip
License requirements: None.
- toolTip() - Method in interface nxopen.blockstyler.SelectFacetRegion
-
Returns the ToolTip
License requirements: None.
- toolTip() - Method in interface nxopen.blockstyler.SelectFeature
-
Returns the ToolTip
License requirements: None.
- toolTip() - Method in interface nxopen.blockstyler.SelectObject
-
Returns the ToolTip
License requirements: None.
- tooltip() - Method in interface nxopen.blockstyler.StringBlock
-
Returns the Tooltip
License requirements: None.
- toolTip() - Method in interface nxopen.blockstyler.SuperPoint
-
Returns the ToolTip
License requirements: None.
- toolTip() - Method in interface nxopen.blockstyler.SuperSection
-
Returns the ToolTip
License requirements: None.
- toolTip() - Method in interface nxopen.diagramming.SheetBuilder
-
Returns the tooltip that will be visible when a template is selected in the Item Rev dialog.
- TOOLTIP - Static variable in class nxopen.visualreporting.VisualReportBuilder.PropertyUsageOption
-
The property is used in tooltip only
- TOOLTIP_AND_INFO_VIEW - Static variable in class nxopen.visualreporting.VisualReportBuilder.PropertyUsageOption
-
- toolTipJunction - Variable in class nxopen.cam.ManageToolPartBuilder.AskToolTipJunctionData
-
The Tool Tip Junction at radius R1
- tooltipOnRolloverToggle() - Method in interface nxopen.display.SelPref
-
Returns the tooltip on rollover toggle
License requirements: None.
- toolTipRadiusId - Variable in class nxopen.cam.ManageToolPartBuilder.AskToolTipJunctionData
-
The radius id where the junction origin is located
- toolTipTextCallback(Tree, Node, int) - Method in interface nxopen.blockstyler.Tree.ToolTipTextCallback
-
Represents the callback which gets called when tree seeks the tooltip.
- toolTipTrackingPoint - Variable in class nxopen.cam.ManageToolPartBuilder.AskToolTipJunctionData
-
The tracking point (1..9) where the junction origin is located
- toolTraceSize() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the tool trace size
License requirements: None.
- ToolTrackingPointBuilder - Interface in nxopen.cam
-
- toolType() - Method in interface nxopen.features.AnalyzePocketBuilder
-
Returns the tool type defines how the angled walls are cut.
- toolType() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the tool type defines how the angled walls are cut.
- toolType() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the split tool type to split the standard part.
- toolVector() - Method in interface nxopen.features.shipdesign.ShipTrimBodyBuilder
-
- toolVector() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the tool vector to create extrude face for split.
- TOP - Static variable in class nxopen.annotations.CalloutGroupBuilder.VerticalGroupLeaderAttachment
-
Top
- TOP - Static variable in class nxopen.annotations.DraftingNoteBuilder.TextAlign
-
Align top
- TOP - Static variable in class nxopen.annotations.HoleCalloutSettingsBuilder.LeaderAttachment
-
- TOP - Static variable in class nxopen.annotations.IdentificationLineLocation
-
Specifies identification line above the
reference line
- TOP - Static variable in class nxopen.annotations.LeaderAlignment
-
- TOP - Static variable in class nxopen.annotations.LeaderVerticalAttachment
-
Attach vertically to the top of the annotation
- TOP - Static variable in class nxopen.annotations.PartsListBuilder.PartsListVerticalGroupLeaderAttachment
-
- TOP - Static variable in class nxopen.annotations.StackHorizontalAlignment
-
Align horizontally along top edge of text box
- TOP - Static variable in class nxopen.annotations.SymbolStyleBuilder.FcfTextUnderlineOption
-
- TOP - Static variable in class nxopen.annotations.TableCellStyleBuilder.BorderLocationType
-
- TOP - Static variable in class nxopen.annotations.TextWithSymbolsBuilder.SymbolAlignmentType
-
Top
- TOP - Static variable in class nxopen.annotations.VerticalTextJustification
-
- TOP - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.ShellRegionEnum
-
Top
- TOP - Static variable in class nxopen.cae.optimization.Hookes
-
Deprecated.
Top
- TOP - Static variable in class nxopen.cae.optimization.TBSLoadCase.LayerOption
-
Top-layer of shell
- TOP - Static variable in class nxopen.cae.responsesimulation.DataLocation.Shell
-
- TOP - Static variable in class nxopen.cae.responsesimulation.NodalFunctionEvalShellLocation
-
Top layer
- TOP - Static variable in class nxopen.cae.responsesimulation.ShellElementEvaluationLocation
-
- TOP - Static variable in class nxopen.cae.responsesimulation.StrainGageShellElementFaceType
-
- TOP - Static variable in class nxopen.cae.Result.Section
-
- TOP - Static variable in class nxopen.cae.xyplot.TextBoxMarginOption
-
The top margin of text box
- TOP - Static variable in class nxopen.diagramming.LeaderLineBuilder.VerticalAlignmentOption
-
Setting the vertical alignment top
- top() - Method in interface nxopen.die.RibChildBuilder
-
Returns the top limit geometry of the die rib.
- TOP - Static variable in class nxopen.display.Stage.WallType
-
The top wall or "ceiling" of the stage.
- TOP - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
-
top view
- TOP - Static variable in class nxopen.features.sheetmetal.SheetmetalFaceLayer
-
- TOP - Static variable in class nxopen.features.vehicledesign.CloseRangeVisibilityBuilder.PathPositionTypes
-
Top
- TOP - Static variable in class nxopen.GroupBuilder.UngroupOption
-
Delete a group
- TOP - Static variable in class nxopen.Light.SceneType
-
Light from the top center of the view
- TOP - Static variable in class nxopen.PlotBuilder.YdisplayOption
-
Y dimension top
- TOP - Static variable in class nxopen.preferences.RoutingPartLibrary.RootType
-
Top of entire part table.
- TOP - Static variable in class nxopen.routing.RouteManager.RootType
-
Top of entire part table.
- TOP - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
-
- TOP - Static variable in class nxopen.tooling.BlankLayoutBuilder.SideWebOption
-
the side webs type of top
- top() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the top boudary distance between blank and strip.
- TOP - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.InsertPositionItems
-
The position is top side
- TOP - Static variable in class nxopen.tooling.DieInsertBuilder.PositionItems
-
The position is top side
- TOP - Static variable in class nxopen.tooling.FastenerAssy.SelectionObjectMethod
-
Top object
- TOP - Static variable in class nxopen.tooling.PiercingInsertBuilder.InsertPosition
-
The position is top side
- TOP - Static variable in class nxopen.tooling.PunchInsertBuilder.InsertPositionItems
-
The position is top side
- TOP - Static variable in class nxopen.tooling.ShimBuilder.SideAttributeValues
-
the TOP value
- TOP - Static variable in class nxopen.tooling.SpecialPiercingInsertBuilder.InsertPositionTypes
-
The position is top side
- top - Variable in class nxopen.uf.UFPlot.Extents
-
- TOP - Static variable in class nxopen.View.Canned
-
- TOP - Static variable in class nxopen.weld.JointmarkBuilder.ReferenceSheetTypes
-
Top
- TOP - Static variable in class nxopen.weld.WeldPointReferenceSheetType
-
spot welds are based on the first face set
- TOP_ARROW - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.VerticalCenteringMarkType
-
Top Arrow
- TOP_ARROW - Static variable in class nxopen.diagramming.VerticalCenteringMarkType
-
Top Arrow
- TOP_ARROW - Static variable in class nxopen.drawings.BordersAndZonesBuilder.VerticalCenteringMarkType
-
Deprecated.
Top Arrow
- TOP_ARROW - Static variable in class nxopen.drawings.VerticalCenteringMarkType
-
Top Arrow
- TOP_BASE_CURVE - Static variable in class nxopen.features.StyledCornerBuilder.CurveControlTypes
-
Use top curve
- TOP_BOTTOM_FACE - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.DepthMeasurementDatumType
-
- TOP_CENTER - Static variable in class nxopen.ame.SymbolAnnotationBuilder.Anchor
-
- TOP_CENTER - Static variable in class nxopen.annotations.AlignmentPosition
-
- TOP_CENTER - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Top center position
- TOP_CENTER - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
top center
- TOP_CENTER - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Top center
- TOP_CENTER - Static variable in class nxopen.cae.xyplot.GraphNamePositionOption
-
Option to positon name on top center of grid plane
- TOP_CENTER - Static variable in class nxopen.diagramming.tables.ContentAlignment
-
Top center content alignment
- TOP_CENTER - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
top center
- TOP_CENTER - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in the top center of the text box
- TOP_CENTER - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Top center position
- TOP_CENTER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in the top center of the text box
- TOP_CENTER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text with the given position in the top center of the text box
- TOP_DIAMETER_HEIGHT_AND_HALF_ANGLE - Static variable in class nxopen.features.ConeBuilder.Types
-
Represents type of cone created by providing Top Diameter, Height and Half Angle
- TOP_END - Static variable in class nxopen.drawings.BrokenViewBuilder.VerticalBreakSide
-
Hide Top side
- TOP_FACE - Static variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlexibleCableContactFaceOptions
-
Top face.
- TOP_FIELD - Static variable in class nxopen.annotations.LineWeldBuilder.FieldWeldType
-
- TOP_FIELD_SIMPLE_FLAG - Static variable in class nxopen.annotations.LineWeldBuilder.FieldWeldType
-
- TOP_FILLED_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- TOP_FILLED_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
top filled arrowhead
- TOP_FILLED_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- TOP_LEFT - Static variable in class nxopen.ame.SymbolAnnotationBuilder.Anchor
-
- TOP_LEFT - Static variable in class nxopen.annotations.AlignmentPosition
-
- TOP_LEFT - Static variable in class nxopen.annotations.DrawingFormatTitleBuilder.TitleBlockPositionType
-
- TOP_LEFT - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Top Left
- TOP_LEFT - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Top left position
- TOP_LEFT - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
top left
- TOP_LEFT - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Top left
- TOP_LEFT - Static variable in class nxopen.annotations.TableSectionStyleBuilder.AlignmentPositionType
-
Top Left
- TOP_LEFT - Static variable in class nxopen.cae.xyplot.GraphNamePositionOption
-
Option to positon name on top left of grid plane
- TOP_LEFT - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.ZoneOrigin
-
Top Left
- TOP_LEFT - Static variable in class nxopen.diagramming.tables.AnchorLocation
-
Top left anchor location
- TOP_LEFT - Static variable in class nxopen.diagramming.tables.ContentAlignment
-
Top left content alignment
- TOP_LEFT - Static variable in class nxopen.diagramming.ZoneOrigin
-
Top Left
- TOP_LEFT - Static variable in class nxopen.display.DecalBuilder.Anchor
-
anchor at top left corner of decal image
- TOP_LEFT - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
top left
- TOP_LEFT - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in the top left of the text box
- TOP_LEFT - Static variable in class nxopen.drawings.BordersAndZonesBuilder.ZoneOrigin
-
Deprecated.
Top Left
- TOP_LEFT - Static variable in class nxopen.drawings.ZoneOrigin
-
Top Left
- TOP_LEFT - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Top left position
- TOP_LEFT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in the top left of the text box
- TOP_LEFT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text with the given position in the top left of the text box
- TOP_LEVEL - Static variable in class nxopen.cam.CutLevel.MeasureTypes
-
Top Level
- TOP_MAJOR_PRINCIPAL_STRAIN - Static variable in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StrainTypeName
-
Display top major principal strain.
- TOP_MIDDLE - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Top Middle
- TOP_MIDDLE - Static variable in class nxopen.display.DecalBuilder.Anchor
-
anchor at top middle corner of decal image
- TOP_MINOR_PRINCIPAL_STRAIN - Static variable in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.StrainTypeName
-
Display top minor principal strain.
- TOP_NODE - Static variable in class nxopen.tooling.FastenerAssy.StackTypeMethod
-
Top node type
- TOP_OPEN_ARROW - Static variable in class nxopen.annotations.ArrowheadType
-
- TOP_OPEN_ARROW - Static variable in class nxopen.annotations.LeaderData.ArrowheadType
-
Top open arrowhead
- TOP_OPEN_ARROW - Static variable in class nxopen.diagramming.DiagrammingFlowdirectionarrowstyle
-
- TOP_PRINCIPAL_STRAIN - Static variable in class nxopen.tooling.LsdynaFormAnalysisResultDisplayBuilder.FormabilityStrainTypeName
-
Display top principal strain.
- TOP_RIGHT - Static variable in class nxopen.ame.SymbolAnnotationBuilder.Anchor
-
- TOP_RIGHT - Static variable in class nxopen.annotations.AlignmentPosition
-
- TOP_RIGHT - Static variable in class nxopen.annotations.DrawingFormatTitleBuilder.TitleBlockPositionType
-
- TOP_RIGHT - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.RelativeLocationType
-
Top Right
- TOP_RIGHT - Static variable in class nxopen.annotations.OriginBuilder.AlignmentPosition
-
Top right position
- TOP_RIGHT - Static variable in class nxopen.annotations.RegionBuilder.AlignmentPosition
-
top right
- TOP_RIGHT - Static variable in class nxopen.annotations.TableCellStyleBuilder.TextAlignmentType
-
Top right
- TOP_RIGHT - Static variable in class nxopen.annotations.TableSectionStyleBuilder.AlignmentPositionType
-
Top Right
- TOP_RIGHT - Static variable in class nxopen.cae.xyplot.GraphNamePositionOption
-
Option to positon name on top right of grid plane
- TOP_RIGHT - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.ZoneOrigin
-
Top Right
- TOP_RIGHT - Static variable in class nxopen.diagramming.tables.AnchorLocation
-
Top right anchor location
- TOP_RIGHT - Static variable in class nxopen.diagramming.tables.ContentAlignment
-
Top right content alignment
- TOP_RIGHT - Static variable in class nxopen.diagramming.ZoneOrigin
-
Top Right
- TOP_RIGHT - Static variable in class nxopen.display.DecalBuilder.Anchor
-
anchor at top right corner of decal image
- TOP_RIGHT - Static variable in class nxopen.display.ImageBaseBuilder.BasePointChoices
-
top right
- TOP_RIGHT - Static variable in class nxopen.display.TransientText.StandardTextRef
-
Display the text with the given position
in the top right of the text box
- TOP_RIGHT - Static variable in class nxopen.drawings.BordersAndZonesBuilder.ZoneOrigin
-
Deprecated.
Top Right
- TOP_RIGHT - Static variable in class nxopen.drawings.ZoneOrigin
-
Top Right
- TOP_RIGHT - Static variable in class nxopen.geometricutilities.RectangularFrameBuilder.AnchorLocationType
-
Top right position
- TOP_RIGHT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.StandardTextRef
-
Display the text with the given position
in the top right of the text box
- TOP_RIGHT - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.TextRef
-
Display the text with the given position in the top right of the text box
- TOP_STACK - Static variable in class nxopen.tooling.FastenerAssy.StackTypeMethod
-
Top stack type
- TOP_TARGET - Static variable in class nxopen.uf.UFModl.FeatureSigns
-
- topAngle() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder
-
Returns the top inclined angle.
- topArc() - Method in interface nxopen.features.ConeBuilder
-
Returns the top arc
License requirements: None.
- topArray - Variable in class nxopen.uf.UFModl.DimensionData
-
- topBaseCurveContinuity() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the top base curve continuity
License requirements: None.
- topBlock() - Method in interface nxopen.blockstyler.BlockDialog
-
Returns a composite block that contains all the blocks in the dialog
License requirements: None.
- topBorder() - Method in interface nxopen.diagramming.tables.CellBuilder
-
Returns the top border line rendering properties.
- topBorder() - Method in interface nxopen.diagramming.tables.TableBuilder
-
Returns the top border rendering properties.
- topcenter - Variable in class nxopen.cae.CylinderBoundingVolume.EndpointsDiameterData
-
- TOPCENTER - Static variable in class nxopen.uf.UFDisp.TextRef
-
- topClearance() - Method in interface nxopen.tooling.ChannelFittingBuilder
-
Returns the top clearance
License requirements: None.
- topCorner() - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
Returns
the top corner of the box.
- topCurveEndPoint() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the top curve end point
License requirements: None.
- topCurveStartPoint() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the top curve start point
License requirements: None.
- topDepth - Variable in class nxopen.uf.UFModl.AskTSlotParmsData
-
- topDepthSkew() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the top depth skew
License requirements: None.
- topDiameter() - Method in interface nxopen.features.ConeBuilder
-
Returns the top diameter
License requirements: None.
- topDiameter - Variable in class nxopen.uf.UFModlFeatures.AskConeParmsData
-
- topDistance() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the top distance(Only for point case):
The top distance defines the extent of the offset pad from the reference point above the point.
- TOPDOWN - Static variable in class nxopen.cam.DmAmBuilder.OrderRegionsOptTypes
-
Top Down Level First approach
- TOPDOWN_DEPTH_FIRST - Static variable in class nxopen.cam.DmAmBuilder.OrderRegionsOptTypes
-
Top Down Depth First approach
- topEnd() - Method in interface nxopen.die.RibChildBuilder
-
Returns the top end limit geometry of the die rib.
- topExtension() - Method in interface nxopen.weld.GrooveBuilder
-
- topFaceCollector() - Method in interface nxopen.cam.GroupFeatures
-
Returns the top face collector
License requirements: None.
- topFaceSelection() - Method in interface nxopen.cae.CAEWeldConnectionBuilder
-
Returns the top face selection(s)
License requirements: None.
- topHorizontalOffset() - Method in interface nxopen.die.RibChildBuilder
-
Returns the top horizontal offset of the die rib.
- topHorizontalOffset() - Method in interface nxopen.die.RibParentBuilder
-
Returns the top horizontal offset of die ribs.
- TOPLEFT - Static variable in class nxopen.uf.UFDisp.TextRef
-
- topleftcorner - Variable in class nxopen.gateway.ImageCaptureBuilder.RegionData
-
Array of 2 integers for Top Left Corner of Region
- topLeftPnt3 - Variable in class nxopen.uf.UFTurn.IpwBoxData
-
- topLength() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the distance from the front of the slot to the back cutout
License requirements: None.
- topLevel() - Method in interface nxopen.ObjectGeneralPropertiesBuilder
-
Returns the top level.
- topLevelOnly - Variable in class nxopen.uf.UFPlist.TraversalSettings
-
- topLimitOffset() - Method in interface nxopen.die.RibChildBuilder
-
Returns the top limit offset of the die rib.
- topLimitOffset() - Method in interface nxopen.die.RibParentBuilder
-
Returns the top limit offset of die ribs.
- topLine() - Method in interface nxopen.features.shipdesign.QualifySketchBuilder
-
Returns the selected top line.
- topMargin() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the value of the margin in top border.
- topMargin() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- topOffCriticalDepths() - Method in interface nxopen.cam.CutLevel
-
Returns the top off critical depths
License requirements: None.
- topOffCriticalDepths() - Method in interface nxopen.cam.CutLevelPlanar
-
Returns the top off critical depths
License requirements: None.
- topOffLevelColor() - Method in interface nxopen.cam.Preferences
-
Returns the top off level
License requirements: None.
- topOffLevels - Variable in class nxopen.uf.UFCutLevels.CutLevels
-
- topOffset() - Method in interface nxopen.cam.HoleMachiningCutParameters
-
Returns the top offset
License requirements: None.
- topOffset() - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
Returns the top offset
License requirements: None.
- topOffset() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the offset value from the base to define the top extent of the internal builds.
- toPoint() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the to point
License requirements: None.
- toPoint() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the to point
License requirements: None.
- toPoint() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the to point
License requirements: None.
- toPoint() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the to point in point to point option in move face, don't use it until nx502
License requirements: None.
- toPoint() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- toPoint() - Method in interface nxopen.geometricutilities.ModlMotion
-
- toPoint() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the to point
License requirements: die_engineering ("DIE ENGINEERING")
.
- toPoints() - Method in interface nxopen.geometricutilities.GeneralPattern
-
Returns the to points
License requirements: None.
- toPointSet() - Method in interface nxopen.geometricutilities.PointSetAlignmentBuilder
-
Returns the "to" point set
License requirements: None.
- topologies - Variable in class nxopen.uf.UFStd.ImportStlAsciiFileData
-
- topologies - Variable in class nxopen.uf.UFStd.ImportVrmlFileData
-
- topology() - Method in interface nxopen.cam.Geometry
-
Returns the topology builder
License requirements: None.
- Topology - Interface in nxopen.cam
-
Represents a CAM topology builder
Use the
Geometry
class to get a topology builder
Created in NX8.0.0
- topology - Variable in class nxopen.uf.UFStd.ImportStlBinaryFileData
-
- topPartName() - Method in interface nxopen.tooling.IntermediateStageBuilder
-
Returns the top part name.
- topRadius() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the top radius for a cone.
- TOPRIGHT - Static variable in class nxopen.uf.UFDisp.TextRef
-
- topRightInPlane - Variable in class nxopen.uf.UFTurn.IpwBoxData
-
- topRightPnt3 - Variable in class nxopen.uf.UFTurn.IpwBoxData
-
- topSeamDisplay() - Method in interface nxopen.annotations.LineWeldData
-
Returns the flag indicating whether the top seam is displayed
License requirements: None.
- topSeamObject() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the top seam object
License requirements: None.
- topSeamReverse() - Method in interface nxopen.annotations.LineWeldData
-
Returns the flag indicating whether the top seam direction is reveresed
License requirements: None.
- topSeamView() - Method in interface nxopen.annotations.LineWeldData
-
Returns the view for which top seam is to be created.
- topShapeControlMethods() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the top shape control methods
License requirements: None.
- TOPSIDE - Static variable in class nxopen.cam.TurningToolBuilder.InsertPositions
-
Topside
- topSurface() - Method in interface nxopen.cam.DrillGeomBuilder
-
Returns the top surface builder
License requirements: None.
- topSurface() - Method in interface nxopen.cam.PointToPointBuilder
-
Returns the top surface builder
License requirements: None.
- topTangentMagnitude() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the top tangent magnitude
License requirements: None.
- topTrimmedMargin() - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
Returns the value of the margin in top border.
- topTrimmedMargin() - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
Returns the top margin
License requirements: None.
- topType - Variable in class nxopen.uf.UFModl.SmpunchData
-
- topUntrimmedMargin() - Method in interface nxopen.diagramming.SheetMarginSettingsBuilder
-
Returns the distance between top of the sheet and top trimmed margin.
- topUntrimmedMargin() - Method in interface nxopen.drawings.SheetMarginSettingsBuilder
-
Returns the top untrimmed margin
License requirements: None.
- topVerticalOffset() - Method in interface nxopen.die.RibChildBuilder
-
Returns the top vertical offset of the die rib.
- topVerticalOffset() - Method in interface nxopen.die.RibParentBuilder
-
Returns the top vertical offset of die ribs.
- topView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the top view
License requirements: None.
- topWidth - Variable in class nxopen.uf.UFModl.AskTSlotParmsData
-
- topZc() - Method in interface nxopen.cam.CutLevel
-
Returns the top ZC value
License requirements: None.
- TOROIDAL - Static variable in class nxopen.facet.FacetedFace.FacetedfaceType
-
Face from toroid
- TORQUE - Static variable in class nxopen.cae.XyFunctionMeasure
-
Torque unit
- torque(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the torque.
- TORQUE - Static variable in class nxopen.mechatronics.BreakingConstraintBuilder.BreakingModeType
-
Torque
- TORQUE - Static variable in class nxopen.motion.ControlOutputBuilder.VariableType
-
Output Variable type Torque.
- TORQUE_BF_FT - Static variable in class nxopen.cae.XyFunctionUnit
-
Torque unit: lbf-ft
- TORQUE_BF_IN - Static variable in class nxopen.cae.XyFunctionUnit
-
Torque unit: lbf-in
- TORQUE_CN_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Torque unit: cN-cm
- TORQUE_KGF_CM - Static variable in class nxopen.cae.XyFunctionUnit
-
Torque unit: kgf-cm (150)
- TORQUE_KGF_M - Static variable in class nxopen.cae.XyFunctionUnit
-
Torque unit: kgf-m
- TORQUE_KGF_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Torque unit: kgf-mm
- TORQUE_MN_MM - Static variable in class nxopen.cae.XyFunctionUnit
-
Torque unit: mN-mm
- TORQUE_NM - Static variable in class nxopen.cae.XyFunctionUnit
-
Torque unit: N-m
- TORQUE_NMM - Static variable in class nxopen.cae.XyFunctionUnit
-
Torque unit: N-mm
- torqueFunction - Variable in class nxopen.uf.UFMotion.ScalarForceTorque
-
- torqueGraph - Variable in class nxopen.tooling.SIZERExportBuilder.MechanicalData
-
Torque graph in solution
- torquePreloadExpression() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the torque preload expression
License requirements: None.
- torquePreloadExpression() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the torque preload expression
License requirements: None.
- torqueType() - Method in interface nxopen.motion.ScalarTorqueBuilder
-
Returns the type.
- TORSION - Static variable in class nxopen.cae.Result.Component
-
- torsion - Variable in class nxopen.geometricanalysis.GeometricProperties.Edge
-
Curve Torsion
- torsion - Variable in class nxopen.uf.UFModlGeneral.AskCurvePropsData
-
- TORSION_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- TORSION_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- TORSIONAL - Static variable in class nxopen.cae.DurabilityStressAxesBuilder.BeamStressEnum
-
Torsional
- TORSIONAL - Static variable in class nxopen.motion.BushingGeneralCoefficientMoveTypes
-
torsional type
- TORSIONAL_DAMPING - Static variable in class nxopen.motion.BushingGeneralCoefficientTypes
-
torsional damping component
- TORSIONAL_PRELOAD - Static variable in class nxopen.motion.BushingGeneralCoefficientTypes
-
torsional preload component
- TORSIONAL_STIFFNESS - Static variable in class nxopen.motion.BushingGeneralCoefficientTypes
-
torsional stiffness component
- torsionalCoefficientExpression() - Method in interface nxopen.motion.DamperBuilder
-
Returns the torsional coefficient expression
License requirements: None.
- torsionalCoefficientExpression() - Method in interface nxopen.motion.SpringBuilder
-
Returns the torsional coefficient expression
License requirements: None.
- torsionalCoefficients() - Method in interface nxopen.motion.BushingCoefficients
-
- torsionalCurveProfile() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
Returns the torsional curve profile.
- torsionalDamping - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- torsionalDamping - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- torsionalExpression() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
- torsionalFunction() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
- torsionalMoment() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the torsional moment
License requirements: mechanisms ("MECHANISMS")
.
- torsionalMoment() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the torsional moment
License requirements: mechanisms ("MECHANISMS")
.
- torsionalPreload - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- torsionalStiffness - Variable in class nxopen.uf.UFMotion.CylindricalBushing
-
- torsionalStiffness - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- torsionalStiffnessExpression() - Method in interface nxopen.motion.SpringBuilder
-
Returns the torsional stiffness expression
License requirements: None.
- torsionalType() - Method in interface nxopen.motion.BushingCylindricalCoefficientsComponent
-
Returns the torsional type
License requirements: None.
- torsionCoefficient - Variable in class nxopen.cae.BeamSection.Properties
-
Torsional coefficient
- TORSO - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named torso
- TORSO - Static variable in class nxopen.HumanData.SegmentScalingType
-
Indicate scaling of torso
- torsoLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the torso length.
- TORUS - Static variable in class nxopen.cam.CamInspectionOperationFeaturetypes
-
Torus
- TORUS - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.ConstFeatType
-
Constructed Torus Feature
- TORUS - Static variable in class nxopen.cam.InspectionMethodBuilder.MethodTypes
-
Torus
- TORUS - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder.Types
-
Deprecated.
- TORUS - Static variable in class nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx.Types
-
- TORUS - Static variable in class nxopen.positioning.ConstraintReference.GeometryType
-
Torus
- TORUS_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType
-
- TOSHM - Static variable in class nxopen.mechatronics.SHMSignalConnectionBuilder.StreamIOType
-
write to SHM
- toState() - Method in interface nxopen.validate.OverrideBuilder
-
Returns the to state of override request
License requirements: None.
- toStation() - Method in interface nxopen.tooling.StripLayoutBuilder
-
Returns the To Station type on the Layout group of Strip Layout Design dialog
License requirements: None.
- toString() - Method in class nxopen.Enum
-
Returns the name of this enum.
- toString() - Method in class nxopen.Tag
-
Returns a string representation of this Tag
- TOTAL - Static variable in class nxopen.cae.ElementExtrudeBuilder.DistanceType
-
total distance
- TOTAL - Static variable in class nxopen.cae.ElementRevolveBuilder.AngleType
-
total angle
- TOTAL - Static variable in class nxopen.cae.ElementRotateBuilder.DistanceType
-
distance specified is total translation distance
- TOTAL - Static variable in class nxopen.cae.ElementTranslateBuilder.DistanceType
-
distance specified is total translation distance
- TOTAL - Static variable in class nxopen.cae.NodeRotateBuilder.DistanceType
-
total
- TOTAL - Static variable in class nxopen.cae.NodeTranslateBuilder.DistanceType
-
total
- TOTAL - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotateTablePcsUpdateOptions
-
Totally update the PCS
- TOTAL - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamExtent
-
Total
- TOTAL - Static variable in class nxopen.display.Stage.WallType
-
The total number of walls in the stage.
- TOTAL - Static variable in class nxopen.geometricutilities.ExtensionMethod
-
Extension Method Total
- TOTAL_ANGLE - Static variable in class nxopen.geometricutilities.SpiralPattern.SpiralDefineSize
-
using total angle to define size of spiral
- TOTAL_COUNT - Static variable in class nxopen.uf.UFSf.ElementType
-
- TOTAL_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_GLUE_SLIP_DISTANCE - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_HEAT_FLUX_APPLIED - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_HEAT_LOAD - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_MIXTURE_MASS_FRACTIONS - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_RESIDUAL_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_RESIDUAL_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- TOTAL_RUNOUT - Static variable in class nxopen.annotations.FeatureControlFrameBuilder.FcfCharacteristic
-
total runout
- TOTAL_RUNOUT - Static variable in class nxopen.annotations.GeometricCharacteristic
-
Specifies total runout characteristics
- TOTAL_RUNOUT - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CharacteristicOptions
-
total runout
- TOTAL_RUNOUT - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Total Runout
- TOTAL_RUNOUT_TYPE - Static variable in class nxopen.uf.UFGdt.Characteristic
-
- TOTAL_THICKNESS - Static variable in class nxopen.cae.MeshControlBuilder.HeightDefinedByOption
-
- totalAlongX() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the total number of insert along X.
- totalAlongY() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the total number of insert along Y.
- totalAngle() - Method in interface nxopen.geometricutilities.SpiralPattern
-
Returns the total angle of spiral
License requirements: None.
- totalAreaOfCutRegionsFound - Variable in class nxopen.uf.UFTurn.AskCutRegionsExistData
-
- totalCollectionCount() - Method in interface nxopen.assemblies.ClearanceAnalysisBuilder
-
Returns the setting to determine whether one collection or two collections should be used.
- totalDepth() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Total Depth
License requirements: None.
- totalDepth() - Method in interface nxopen.cam.ThreadTurningBuilder
-
Returns the Total Depth
License requirements: None.
- totalForce() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the total force of the calculated processes .
- totalForceCenter() - Method in interface nxopen.tooling.ForceCalculationBuilder
-
Returns the total force center of the calculated processes .
- totalLength() - Method in interface nxopen.geometricutilities.CurveLengthData
-
Returns the total length
License requirements: solid_modeling ("SOLIDS MODELING")
.
- totallength - Variable in class nxopen.routing.BendReportManager.GenerateMil98ReportData
-
Total length of the entire path of segments.
- totallength - Variable in class nxopen.routing.BendReportManager.GenerateXyzReportData
-
Total length of the entire path of segments.
- totallength - Variable in class nxopen.routing.BendReportManager.GenerateYbcReportData
-
Total length of the entire path of segments.
- totalLength - Variable in class nxopen.uf.UFDisp.ConeheadAttrbSTag
-
- totalLength - Variable in class nxopen.uf.UFDraw.ArrowParms
-
- totalMass() - Method in interface nxopen.cae.Mesh0dBuilder
-
Returns the use total mass option
License requirements: None.
- totalNum - Variable in class nxopen.cae.IMeshManager.StatusInfo
-
total number of entities
- totalNumber() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the total number of insert for circular array.
- totalObjectsCount() - Method in interface nxopen.validate.ResultObject
-
Returns the total objects count of check result.
- totalPoints - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- totalResponseLineSetting() - Method in interface nxopen.cae.xyplot.GraphOptionsStyle2D
-
Returns the total response line setting
License requirements: None.
- totalRise() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the total rise
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- totalRun() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the total run
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- totalSearchDirectories() - Method in interface nxopen.Catiav5Importer
-
Returns the number of search directories - This option allows you to specify total number of serach directories
License requirements: None.
- totalThickness() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the total thickness
License requirements: nx_masterfem ("Finite Element Modeling")
.
- totalThickness() - Method in interface nxopen.cam.MultiplePassesBuilder
-
Returns the Total Thickness
License requirements: None.
- toTerminal() - Method in interface nxopen.routing.electrical.Connection
-
Returns the To terminal.
- TOUCH - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType
-
- TOUCH - Static variable in class nxopen.positioning.Constraint.Type
-
Two geometries touch
- touchArea() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
Returns the option for calculating the area of the touch sheet body.
- touchBody() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
Returns the option for generating the touch sheet body.
- TOUCHING - Static variable in class nxopen.assemblies.ClearanceSet.PenetrationDepthResult
-
- toVector() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the to vector in axis to axis option in move face, don't use it until nx502
License requirements: None.
- toVector() - Method in interface nxopen.formboard.OrientBranchBuilder
-
- toVector() - Method in interface nxopen.geometricutilities.ModlMotion
-
- toVector() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the to vector
License requirements: die_engineering ("DIE ENGINEERING")
.
- toViews() - Method in interface nxopen.drawings.ViewProjectionBuilder
-
Returns the to views
License requirements: None.
- TOWARD - Static variable in class nxopen.cam.GuidedCurveCutOrder.CutOrderOption
-
- TOWARD - Static variable in class nxopen.positioning.ComponentConstraint.DirectionToFixed
-
Toward fixed geometry
- TOWARD_CONST - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingRuleTypes
-
Tool tilting rule toward constant
- TOWARD_CURVE - Static variable in class nxopen.cam.ToolAxisTilt.Types
-
Tilt toward curve
- TOWARD_CURVE - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
-
Tool axis mode: towards curve
- TOWARD_END - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.SightLineCutTypes
-
Add sight line cuts from the sight line toward the end side of each template.
- TOWARD_LINE - Static variable in class nxopen.cam.SurfaceContourBuilder.AccessVectorMethodType
-
toward the vector defined
- TOWARD_LINE - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Toward Line
- TOWARD_LINE - Static variable in class nxopen.features.ProjectCurveBuilder.DirectionType
-
Represents Towards Line
- TOWARD_POINT - Static variable in class nxopen.cam.ToolAxisTilt.Types
-
Tilt tpward point
- TOWARD_POINT - Static variable in class nxopen.cam.ToolAxisVariable.Types
-
Toward Point
- TOWARD_POINT - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTypes
-
Tool axis mode: towards point
- TOWARD_POINT - Static variable in class nxopen.features.ProjectCurveBuilder.DirectionType
-
Represents Towards Point
- TOWARD_START - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.SightLineCutTypes
-
Add sight line cuts from sight line toward the start side of each template.
- TOWARDS - Static variable in class nxopen.annotations.CuttingPlaneSymbolBuilder.ArrowDirectionOption
-
The Direction of the PMI Cutting Plane Symbol Arrow Towards Plane.
- TOWARDS_CORNER - Static variable in class nxopen.cam.ProfileStrategy.Types
-
Profile strategy: Towards Corner
- TOWARDS_POINT - Static variable in class nxopen.cam.NormalToToolAxisMoveBuilder.Orientation
-
Towards Point
- TOWARDS_VIEW - Static variable in class nxopen.annotations.ShipDraftingFramebarGeneralBuilder.TicDirectionTypes
-
- tparameter() - Method in interface nxopen.cae.MeshPointOnCurveBuilder
-
Returns the t parameter
License requirements: None.
- tpnumber - Variable in class nxopen.cam.TrackingBuilder.Data
-
the track point number
- trace(Tag, int) - Method in interface nxopen.uf.UFMotion
-
- Trace() - Constructor for class nxopen.uf.UFMotion.Trace
-
- Trace(Tag, int) - Constructor for class nxopen.uf.UFMotion.Trace
-
- TRACE_LINE_TYPE - Static variable in class nxopen.uf.UFDraw.DraftingCurveType
-
- traceARay(int, Tag[], double[], double[], double[], int) - Method in interface nxopen.uf.UFModeling
-
- TraceARayData() - Constructor for class nxopen.uf.UFModeling.TraceARayData
-
- traceCurrentPosition() - Method in interface nxopen.motion.PostProcess
-
Trace current position
License requirements: mechanisms ("MECHANISMS")
.
- traceCurveGroup - Variable in class nxopen.uf.UFTrns.TransformObjectsData
-
- tracedSpindleLine() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the line that specifies the traced spindle line in the scenario model.
- traceEntireMechanism() - Method in interface nxopen.motion.PostProcess
-
Trace entire mechanism
License requirements: mechanisms ("MECHANISMS")
.
- traceIntersectionCurve() - Method in interface nxopen.motion.PostProcess
-
Trace intersection curve
License requirements: mechanisms ("MECHANISMS")
.
- TRACELINE - Static variable in class nxopen.preferences.PartObject.ObjectType
-
Traceline
- Traceline - Interface in nxopen
-
Represents a traceline.
- TRACELINE_CURVE - Static variable in class nxopen.drawings.DraftingCurveInfo.DraftingCurveType
-
Specifies TraceLine Curve
- TracelineCollection - Interface in nxopen
-
Represents a collection of tracelines
To obtain an instance of this class, refer to
Part
Created in NX4.0.0
- traceLineCreateGapsLock() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the trace line create gaps lock
License requirements: None.
- traceLineCreateGapsValue() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the trace line create gaps value
License requirements: None.
- tracelineGap - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- tracelineGapSize - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- traceLineHiddenColor() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the trace line hidden color
License requirements: None.
- tracelineHiddenColor - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- traceLineHiddenFont() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the trace line hidden font
License requirements: None.
- tracelineHiddenFont - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- traceLineHiddenWidth() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the trace line hidden Width
License requirements: None.
- tracelineHiddenWidth - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- traceLines() - Method in interface nxopen.drawings.ViewStyle
-
Returns object for doing View style settings applicable to TraceLines .
- TraceLines - Interface in nxopen.features.shipdesign
-
Represents a trace lines feature
To create or edit an instance of this class, use
TraceLinesBuilder
Created in NX7.5.0
- tracelines() - Method in interface nxopen.Part
-
Returns a collection of tracelines .
- traceLines() - Method in interface nxopen.preferences.ViewPreferences
-
Returns object for doing View Preferences settings applicable to TraceLines .
- TraceLinesBuilder - Interface in nxopen.features.shipdesign
-
- TraceLinesBuilder.TraceLineType - Class in nxopen.features.shipdesign
-
Define the traceline creation method
- TraceLinesViewPreferences - Interface in nxopen.preferences
-
Represents set of Trace Lines View Preferences applicable to drafting views.
- TraceLinesViewStyle - Interface in nxopen.drawings
-
Represents interface for Trace Lines View Style Preferences applicable to drafting views.
- traceLineVisibleColor() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the trace line visible color
License requirements: None.
- tracelineVisibleColor - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- traceLineVisibleFont() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the trace line visible font
License requirements: None.
- tracelineVisibleFont - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- traceLineVisibleWidth() - Method in interface nxopen.drawings.CustomViewSettingsBuilder
-
Returns the trace line visible font
License requirements: None.
- tracelineVisibleWidth - Variable in class nxopen.uf.UFDraw.ViewPrfs
-
- TracelinkQuery - Interface in nxopen.pdm
-
Represents the Trace link query
To obtain an instance of this class use
RequirementUtils
Created in NX6.0.3
- traceModel(int, int) - Method in interface nxopen.uf.UFMotion
-
- TraceModelData() - Constructor for class nxopen.uf.UFMotion.TraceModelData
-
- Tracer - Interface in nxopen.mechatronics
-
Represents the Tracer class.
- TRACER_FLUID_MASS_FRACTION - Static variable in class nxopen.cae.Result.Quantity
-
- traceRateSetting() - Method in interface nxopen.mechatronics.TracerBuilder
-
Returns the trace rate setting
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- TracerBuilder - Interface in nxopen.mechatronics
-
- TracerCollection - Interface in nxopen.mechatronics
-
Represents a collection of Tracer.
- tracers() - Method in interface nxopen.mechatronics.PhysicsManager
-
- traceSiteName - Variable in class nxopen.HumanReachZone.Data
-
Name of the site traced to create the trace site
- track() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the track of the axle.
- TRACK_MULTIPLE_TURNS - Static variable in class nxopen.mechatronics.PositionControlBuilder.AngularPathOptions
-
track multiple turns
- trackDrawingChangesGeneral() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the track drawing changes general settings builder
License requirements: None.
- TrackDrawingChangesGeneralBuilder - Interface in nxopen.drawings
-
- TrackDrawingChangesGeneralBuilder.BaselineOfComparisonType - Class in nxopen.drawings
-
Represents baseline Of comparison type
- TrackDrawingChangesGeneralBuilder.CompareMethodType - Class in nxopen.drawings
-
Represents compare method type
- TrackDrawingChangesGeneralBuilder.SnapshotDataToUseType - Class in nxopen.drawings
-
Represents snapshot data to use type
- TrackDrawingChangesGeneralBuilder.SymbolType - Class in nxopen.drawings
-
Represents symbol type
- trackDrawingChangesReportFilter() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the track drawing changes report filter builder
License requirements: None.
- TrackDrawingChangesReportFilterBuilder - Interface in nxopen.drawings
-
- TrackDrawingChangesReportFilterBuilder.Filter - Class in nxopen.drawings
-
Represents Report Filter options
- TRACKED_CHANGES - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ComparisonBaseline
-
Deprecated.
- TRACKED_CHANGES - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.BaselineOfComparisonType
-
- TRACKING - Static variable in class nxopen.drafting.CutCopyPasteBuilder.TypePaste
-
Tracking type
- TrackingBuilder - Interface in nxopen.cam
-
Represents a Tracking Builder .
- trackingBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the tracking point builder
License requirements: cam_base ("CAM BASE")
.
- TrackingBuilder.Data - Class in nxopen.cam
-
- trackingCsys() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the tracking csys
License requirements: None.
- trackingData() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the tracking data (tracking point type)
License requirements: None.
- TrackingData - Interface in nxopen.features
-
Represents tracking information for outputs created by custom feature.
- trackingMode() - Method in interface nxopen.cae.optimization.TBSEigenvalueOptimizationParameters
-
Returns the switch for mode tracking
License requirements: None.
- trackingName() - Method in interface nxopen.cam.TrackpointBuilder
-
Returns the Tracking Point name value
License requirements: None.
- trackingNodes() - Method in interface nxopen.cae.optimization.TBSEigenvalueOptimizationParameters
-
- trackingPoint() - Method in interface nxopen.annotations.CoordinateNoteBuilder
-
Returns the tracking point
License requirements: None.
- TrackingPointChange() - Constructor for class nxopen.uf.UFPath.TrackingPointChange
-
- TrackingPointChange(double, double, int, int) - Constructor for class nxopen.uf.UFPath.TrackingPointChange
-
- TrackingPointData() - Constructor for class nxopen.uf.UFCutter.TrackingPointData
-
- TrackingPointData(double, double, double, int, int, int, int, int, String) - Constructor for class nxopen.uf.UFCutter.TrackingPointData
-
- trackingPointStatus() - Method in interface nxopen.cam.TurningOperationBuilder
-
Returns the tracking point status
License requirements: None.
- trackingPointStatus() - Method in interface nxopen.cam.TurnToolProbingBuilder
-
Returns the tracking point status
License requirements: None.
- trackingPointType() - Method in interface nxopen.cam.Cutcom
-
Returns the cutter compensation tracking point selection
License requirements: None.
- trackingXOff() - Method in interface nxopen.cam.SolidTrackingBuilder
-
Returns the XOff value
License requirements: None.
- trackingYOff() - Method in interface nxopen.cam.SolidTrackingBuilder
-
Returns the YOff value
License requirements: None.
- trackingZOff() - Method in interface nxopen.cam.SolidTrackingBuilder
-
Returns the ZOff value
License requirements: None.
- trackLowerLimitHeightTH1() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the seat track Z range lower limit TH1 of seat data, it should be set for Class A driver, Class A front passenger
and Class B driver
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- trackLowerLimitLengthTL1() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the seat track X range lower limit TL1 of seat data, it should be set for Class A driver, Class A front passenger
and Class B driver
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- TrackPoint - Interface in nxopen.cam
-
Represents an Track Point
To obtain an instance of this class us
TrackPointCollection
Created in NX4.0.0
- TrackpointBuilder - Interface in nxopen.cam
-
Represents a Trackpoint Builder
This is an abstract class and can not be instantiated
.
- TrackPointCollection - Interface in nxopen.cam
-
Represents the track point collection
To obtain an instance of this class, refer to
Tool
Created in NX5.0.0
- TrackPointData() - Constructor for class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
- trackSide() - Method in interface nxopen.motion.TirePropertyTnoBuilder
-
Returns the track side.
- trackUpperLimitHeightTH2() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the seat travel Z range upper limit TH2 of seat data, it should be set for Class A driver, Class A front passenger
and Class B driver
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- trackUpperLimitLengthTL23() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the seat track X range upper limit TL23 of seat data, it should be set for Class A driver, Class A front passenger
and Class B driver
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- TRAILING - Static variable in class nxopen.annotations.AngularSuppressZeros
-
Specifies trailing zeros suppressed
- TRAILING_EDGE - Static variable in class nxopen.cam.BladeStartPoint.Types
-
Trailing Edge
- TRAILING_EDGE - Static variable in class nxopen.cam.CutSides.SideType
-
Trailing Edge
- trailingAngle() - Method in interface nxopen.cam.ToolAxisAdvanced
-
- trailingEdge() - Method in interface nxopen.cam.Blade
-
Returns the trailing edge builder
License requirements: None.
- trailingEdgeClearanceAngle() - Method in interface nxopen.cam.ToolAxisAdvanced
-
Returns the trailing edge clearance angle
License requirements: None.
- trailingStr - Variable in class nxopen.uf.UFPlist.FieldFormat
-
- TRAN_ACIS_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_ACIS_EXPORT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_ACIS_IMPORT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_ACIS_SAB_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_ACIS_SAB_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_ACIS_SAT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_ACIS_SAT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_CATIA_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_CATIA_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_CATIAV5CATPART_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_CATIAV5CATPART_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_CATIAV5CATPRODUCT_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_CATIAV5CATPRODUCT_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_CATIAV5DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_CATIAV5FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_CATMOD_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_CATMOD_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_DWG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_DWG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_DXF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_DXF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_DXFTOUG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_DXFTOUG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_IGES_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_IGES_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_IGS_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_IGS_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_LOG_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_LOG_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_PART_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_PROE_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_PROE_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_STEP203DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_STEP203FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_STEP214DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_STEP214FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_STP242DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_STP242FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_STP_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_STP_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_STPX_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_STPX_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_STPXZ_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_STPXZ_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_STPZ_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_STPZ_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRAN_UGTODXF_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRAN_UGTODXF_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRANLSATE_ALONG_CONTROL_POLYGON - Static variable in class nxopen.features.StudioXformBuilder.Types
-
Deprecated.
Along polygon type of Xform
- trans - Variable in class nxopen.BasePart.TransientStatus
-
Part is transient
- TRANSAROT - Static variable in class nxopen.sim.MachineToolConfiguration.SwivelingTypes
-
The TRANS/AROT swiveling type
- transDampingDeflection() - Method in interface nxopen.motion.TirePropertyAdvancedParameters
-
Returns the transitional damping deflection.
- transEndEdge - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- TRANSF_AXIS_ANGLE - Static variable in class nxopen.uf.UFModl.TransformType
-
- TRANSF_AXIS_AXIS - Static variable in class nxopen.uf.UFModl.TransformType
-
- TRANSF_DIRECTION_DISTANCE - Static variable in class nxopen.uf.UFModl.TransformType
-
- TRANSF_POINT_POINT - Static variable in class nxopen.uf.UFModl.TransformType
-
- transfData - Variable in class nxopen.uf.UFModlFeatures.AskMoveRegionData
-
- transfer2dComponentAnnotation() - Method in interface nxopen.layout2d.AssemblyCreationSettingsBuilder
-
Returns the settings to determines whether or not transfer 2d component annotation
License requirements: None.
- transferAnnotation() - Method in interface nxopen.drawings.ViewStyleBaseBuilder
-
Returns the transfer annotation toggle on the BASE tab of the View Style Dialog
License requirements: None.
- transferAnnotation - Variable in class nxopen.uf.UFDraw.ViewInfo
-
- transferAvoidanceFrom() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the from point builder
License requirements: None.
- transferAvoidanceFrom() - Method in interface nxopen.cam.NcmOptimizeGroup
-
Returns the from point builder
License requirements: None.
- transferAvoidanceFromBuilder() - Method in interface nxopen.cam.MillOrientGeomBuilder
-
Returns the from point builder
License requirements: None.
- transferAvoidanceFromBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the from point builder
License requirements: None.
- transferAvoidanceFromBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the from point builder
License requirements: None.
- transferAvoidanceGohome() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the gohome point builder
License requirements: None.
- transferAvoidanceGohome() - Method in interface nxopen.cam.NcmOptimizeGroup
-
Returns the gohome point builder
License requirements: None.
- transferAvoidanceGohomeBuilder() - Method in interface nxopen.cam.MillOrientGeomBuilder
-
Returns the gohome point builder
License requirements: None.
- transferAvoidanceGohomeBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the gohome point builder
License requirements: None.
- transferAvoidanceGohomeBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the gohome point builder
License requirements: None.
- transferAvoidanceReturn() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the return point builder
License requirements: None.
- transferAvoidanceReturn() - Method in interface nxopen.cam.NcmOptimizeGroup
-
Returns the return point builder
License requirements: None.
- transferAvoidanceReturnBuilder() - Method in interface nxopen.cam.MillOrientGeomBuilder
-
Returns the return point builder
License requirements: None.
- transferAvoidanceReturnBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the return point builder
License requirements: None.
- transferAvoidanceReturnBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the return point builder
License requirements: None.
- transferAvoidanceStart() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the start point builder
License requirements: None.
- transferAvoidanceStart() - Method in interface nxopen.cam.NcmOptimizeGroup
-
Returns the start point builder
License requirements: None.
- transferAvoidanceStartBuilder() - Method in interface nxopen.cam.MillOrientGeomBuilder
-
Returns the start point builder
License requirements: None.
- transferAvoidanceStartBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the start point builder
License requirements: None.
- transferAvoidanceStartBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the start point builder
License requirements: None.
- transferBetweenLevelsSafeDistanceBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the transfer between levels safe distance builder (inheritable tool dep)
License requirements: None.
- transferBetweenLevelsType() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the transfer between levels type
License requirements: None.
- transferBetweenRegions() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the transfer between regions
License requirements: None.
- transferBetweenRegions() - Method in interface nxopen.cam.NcmOptimizeGroup
-
Returns the transfer between regions
License requirements: None.
- transferBetweenRegionsBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the Transfer Between Regions builder
License requirements: None.
- transferBetweenRegionsBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the transfer settings for between regions
License requirements: None.
- transferBetweenRegionsSafeDistanceBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
- transferBetweenRegionsType() - Method in interface nxopen.cam.NcmPlanarBuilder
-
- transferClearance() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the clearance setting
License requirements: None.
- transferClearance() - Method in interface nxopen.cam.NcmOptimizeGroup
-
Returns the clearance setting
License requirements: None.
- transferClearanceBuilder() - Method in interface nxopen.cam.MillOrientGeomBuilder
-
Returns the clearance builder (inheritable tool dep)
License requirements: None.
- transferCommonClearanceBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the common clearance setting
License requirements: None.
- transferEndAngle() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the angle to specify when transfer stops moving.
- TransferFileDataBuilder - Interface in nxopen.ame
-
Imports a new one or updates the existing configuration in AD Upstream Data Navigator from the external file.
- transferHeight() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
Returns the transfer height
License requirements: None.
- transferHeight() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
Returns the transfer height
License requirements: None.
- transferHeightBuilder() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
Returns the transfer height builder
License requirements: None.
- transferInitialFinal() - Method in interface nxopen.cam.NcmHoleMachining
-
Returns the transfer settings for initial and final
License requirements: None.
- transferInitialFinal() - Method in interface nxopen.cam.NcmOptimizeGroup
-
Returns the transfer settings for initial and final
License requirements: None.
- transferInitialFinal() - Method in interface nxopen.cam.NcmTransferTypes
-
Returns the transfer settings for initial and final
License requirements: None.
- transferInitialFinalBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the transfer settings for initial and final
License requirements: None.
- transferMaxToolAxisChange() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the transfer/rapid max tool axis change
License requirements: None.
- transferMethod() - Method in interface nxopen.cam.PlungeMillingBuilder
-
Returns the transfer Method
License requirements: None.
- transferRegionDistanceBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the region distance setting
License requirements: None.
- TRANSFERRING_LINKED_BODY - Static variable in class nxopen.features.shipdesign.CopyPasteNewBuilder.CopyApproach
-
The approach by transferring linked body.
- transferStartAngle() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the angle to specify when transfer starts moving.
- transferToDrawing(Tag, Tag, Tag, boolean) - Method in interface nxopen.uf.UFDrf
-
- transferTolerance() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the transfer/rapid tolerance value
License requirements: None.
- transferToleranceSource() - Method in interface nxopen.cam.NcmSmoothingBuilder
-
Returns the transfer/rapid tolerance type
License requirements: None.
- transferTopLevelSketchAnnotation() - Method in interface nxopen.layout2d.AssemblyCreationSettingsBuilder
-
Returns the settings to determines whether or not transfer top level sketch annotation
License requirements: None.
- transferType() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
Returns the transfer type (direct, clearance, lowest safe z)
License requirements: None.
- transferType() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
Returns the transfer type (direct, clearance, lowest safe z)
License requirements: None.
- transferUsingMethod() - Method in interface nxopen.cam.ToolPathSplitBuilder
-
Returns the transfer using method (none, ramp on shape, lift and plunge)
License requirements: None.
- transferUsingMethod() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
Returns the transfer using method (none, ramp on shape, lift and plunge)
License requirements: None.
- transferWithinLevelsHeightBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the transfer within levels height builder (inheritable tool dep)
License requirements: None.
- transferWithinLevelsMaxFollowDistanceBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the transfer within levels max follow distance builder (inheritable tool dep)
License requirements: None.
- transferWithinLevelsSafeDistanceBuilder() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the transfer within levels safe distance builder (inheritable tool dep)
License requirements: None.
- transferWithinLevelsType() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the transfer within levels type
License requirements: None.
- transferWithinLevelsWith() - Method in interface nxopen.cam.NcmPlanarBuilder
-
Returns the transfer within levels strategy
License requirements: None.
- transferWithinRegionsBuilder() - Method in interface nxopen.cam.NcmScBuilder
-
Returns the transfer settings for within regions
License requirements: None.
- TRANSFORM - Static variable in class nxopen.cam.InspectionConstructedFeatureBuilder.MethodEnumType
-
Transform a copy of a feature from one PCS to another PCS
- TRANSFORM - Static variable in class nxopen.die.QuickBinderBuilder.EditTypes
-
Transform body.
- transform() - Method in interface nxopen.drafting.CutCopyPasteBuilder
-
Returns the motion from the default paste position
License requirements: None.
- TRANSFORM - Static variable in class nxopen.drafting.CutCopyPasteBuilder.TypePaste
-
Transform type
- TRANSFORM - Static variable in class nxopen.features.subdivision.SubdivisionExtrudeCageBuilder.TransformationMethodType
-
Transform extruded topology
- TRANSFORM - Static variable in class nxopen.features.subdivision.TransformCageData.TransformationMethodType
-
Edit cage topology by transformations
- transform(Matrix3x3, Vector3d) - Method in interface nxopen.layout2d.Component
-
Transforms the component given a rotation matrix and a translation vector
License requirements: nx_layout ("NX Layout")
.
- transform() - Method in interface nxopen.routing.TransformPathBuilder
-
Returns the motion or transform.
- TRANSFORM - Static variable in class nxopen.tooling.ElectrodeCopyBuilder.Copy
-
the method is transform
- transform() - Method in interface nxopen.tooling.LayoutBuilder
-
Reposition cavity
License requirements: None.
- TRANSFORM - Static variable in class nxopen.tooling.LayoutRepositionBuilder.Method
-
Transform method
- transform - Variable in class nxopen.uf.UFAssem.AskCompExplosionData
-
- transform - Variable in class nxopen.uf.UFAssem.AskComponentData
-
- transform - Variable in class nxopen.uf.UFDisp.J3dEntity
-
- Transform - Interface in nxopen.weld
-
Represents a Weld Transform Feature.
- TRANSFORM - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Weld Transform command
- TRANSFORM_BODY - Static variable in class nxopen.weld.TransformBuilder.ConnectedPartMethods
-
Use the location of the transform body to help find connected parts
- TRANSFORM_PATH - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Transform Path command.
- TRANSFORM_PATH - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Transform Path command.
- TRANSFORM_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason
-
- TRANSFORM_TOOLPATH - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- TRANSFORMATION_MATRIX - Static variable in class nxopen.motion.MechanismExport.PositionOrientationFormat
-
Origin and X, Y, Z vectors
- transformationMethod() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the transformation method.
- transformationMethod() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the transformation method.
- transformationObjects() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the transformation objects are additional objects that can be flattened with the same mapping.
- transformationObjects() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the transformation objects are additional objects that can be flattened with the same mapping.
- TransformBlockBuilder - Interface in nxopen.mechanicalrouting
-
- TransformBlockBuilder.Transformtype - Class in nxopen.mechanicalrouting
-
Specifies the options available for transform.
- TransformBuilder - Interface in nxopen.weld
-
- TransformBuilder.ConnectedPartMethods - Class in nxopen.weld
-
The type to define the method used to find connected parts
- TransformBuilder.TransformationTypes - Class in nxopen.weld
-
The transformation types
- TransformCageData - Interface in nxopen.features.subdivision
-
- TransformCageData.FallOffMethodType - Class in nxopen.features.subdivision
-
Falloff method types
- TransformCageData.MovementMethodType - Class in nxopen.features.subdivision
-
Movement types
- TransformCageData.ScalingMethodType - Class in nxopen.features.subdivision
-
Scaling method
- TransformCageData.TransformationMethodType - Class in nxopen.features.subdivision
-
Transformation method types
- TransformCageData.WCSOptionType - Class in nxopen.features.subdivision
-
WCS principal axis or plane types
- transformCircles() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the transform circles
License requirements: None.
- transformComponents() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the setting indicating how to represent transformed components in flat solid.
- transformCurves() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the curves to be transformed
License requirements: None.
- transformCurves() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the curves to be transformed
License requirements: None.
- transformCurvesContinuity() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
Returns the continuity option for the transformation start and end curves used in the transformation or morphing calculations
License requirements: None.
- transformCurvesList() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the transformation curves list that defines the list items containing the transformation start and end curves used in the transformation or morphing calculations
License requirements: None.
- transformCurvesMagnitude() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
Returns the magnitude controlled by continuity for the transformation curves
License requirements: None.
- TransformData() - Constructor for class nxopen.layout2d.Component.TransformData
-
- TransformData() - Constructor for class nxopen.pdm.DesignElementRevision.TransformData
-
- transformData - Variable in class nxopen.uf.UFPatt.AskData
-
- transformDieDirection(Direction) - Method in interface nxopen.die.Tip
-
Transforms the direction from die position to product position.
- transformDiePoint(Point) - Method in interface nxopen.die.Tip
-
Transforms the point from die position to product position.
- transformEndCurves() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
Returns the end or target constraint for the product shape in the form of curves used in the transformation or morphing calculations
License requirements: None.
- transformEndPoint() - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilder
-
Returns the end point that defines the end or target point constraint on the product shape
License requirements: None.
- transformEntities(int, Tag[], double[]) - Method in interface nxopen.uf.UFModl
-
- transformer() - Method in interface nxopen.features.PolylineBuilder
-
Returns the transformation tool.
- transformer() - Method in interface nxopen.features.subdivision.CageManipulatorData
-
Returns the transformation tool.
- transformer() - Method in interface nxopen.features.subdivision.CopyCageBuilder
-
Returns the transformation tool.
- transformer() - Method in interface nxopen.features.subdivision.PasteCageData
-
Returns the transformation tool.
- transformer() - Method in interface nxopen.features.subdivision.SubdivisionExtrudeCageBuilder
-
Returns the transformation tool.
- transformer() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- transformer() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the transformation tool.
- TransformerData - Interface in nxopen.geometricutilities
-
Transformation and orientation tool.
- TransformerData.ObjectType - Class in nxopen.geometricutilities
-
Type of objects.
- transformFaces() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the faces to be transformed
License requirements: None.
- transformFaces() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the faces to be transformed
License requirements: None.
- transformFactor() - Method in interface nxopen.features.MeshTransformerBuilder
-
Returns the transform factor that magnifies or shrinks the displacements from the transformation or morphing calculations
License requirements: None.
- transformGeometry() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the transform geometry Metaform feature will map geometry "From" surfaces "To" surfaces.
- transformMatrix() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the rotation matrix of binder sheet body transformation.
- transformMatrixAcsToMtcs(UFVariant, double[]) - Method in interface nxopen.uf.UFSim
-
- transformMethod() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the transform method that should be used in active hood system
License requirements: None.
- transformMotion() - Method in interface nxopen.features.MoveCurveBuilder
-
Returns the transform motion
License requirements: None.
- transformMotion() - Method in interface nxopen.features.MoveObjectBuilder
-
Returns the transform
License requirements: None.
- transformObjects(boolean, Stock[], NXObject[], Point3d, Matrix3x3, boolean) - Method in interface nxopen.routing.RouteManager
-
Transforms routing objects.
- transformObjects(Tag[], int, double[][], boolean) - Method in interface nxopen.uf.UFRoute
-
- transformObjects(double[], Tag[], int, int, int, int) - Method in interface nxopen.uf.UFTrns
-
- TransformObjectsData() - Constructor for class nxopen.uf.UFTrns.TransformObjectsData
-
- transformOffsetAcsToMtcs(UFVariant, double[]) - Method in interface nxopen.uf.UFSim
-
- TransformOffsetAcsToMtcsData() - Constructor for class nxopen.uf.UFSim.TransformOffsetAcsToMtcsData
-
- transformOrigin() - Method in interface nxopen.die.QuickBinderBuilder
-
Returns the new origin of binder sheet body transformation.
- TransformPathBuilder - Interface in nxopen.routing
-
Builder for the "Transform Path" operation.
- TransformPathBuilder.CopyAttributes - Class in nxopen.routing
-
Specifies what attributes to copy during Transform Path
- TransformPathBuilder.TransformOption - Class in nxopen.routing
-
Tranform operation to perform.
- transformPointsList() - Method in interface nxopen.features.FreeTransformerBuilder
-
Returns the transformation points list that defines list items containing the transformation start and end points used in the transformation or morphing calculations
License requirements: None.
- transformProps(double[][], UFWeight.Properties) - Method in interface nxopen.uf.UFWeight
-
- transformRestrictionAreas() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the setting indicating whether to transform restriction areas in flat solid.
- transformStartCurves() - Method in interface nxopen.geometricutilities.FtmTransformCurvesBuilder
-
Returns the starting constraint for the product shape in the form of curves used in the transformation or morphing calculations
License requirements: None.
- transformStartPoint() - Method in interface nxopen.geometricutilities.FtmTransformPointsBuilder
-
Returns the start point that defines the starting point constraint on the product shape
License requirements: None.
- transformToAbsoluteCsys() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder
-
Returns the flag which decides if the flattened solid will be transformed to Absolute CSYS.
- transformToAbsoluteCsys() - Method in interface nxopen.features.sheetmetal.FlatSolidBuilder
-
Returns the flag which decides if the flattened solid will be transformed to Absolute CSYS.
- transformTool() - Method in interface nxopen.mechanicalrouting.EditPointBuilder
-
Returns the transform tool.
- transformToolpath - Variable in class nxopen.uf.UFCam.Preferences
-
- transformType() - Method in interface nxopen.cam.InspectionOperationTransformBuilder
-
Returns the transform type
License requirements: None.
- transformType() - Method in interface nxopen.cam.OperationTransformBuilder
-
Returns the transform type
License requirements: None.
- TransFrame - Interface in nxopen.features.shipdesign
-
Represents a TransVerse Frame feature
To create or edit an instance of this class, use
TransFrameBuilder
Created in NX5.0.0
- TransFrameBuilder - Interface in nxopen.features.shipdesign
-
- transFrameEnum() - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
Returns the output option for the Transverse Frames
License requirements: None.
- TransFrameListItemBuilder - Interface in nxopen.features.shipdesign
-
- TransFrameListItemBuilderList - Interface in nxopen.features.shipdesign
-
Represents a list of objects.
- transFrameNegList() - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
Returns the negative list.
- transFramePosList() - Method in interface nxopen.features.shipdesign.TransFrameBuilder
-
Returns the positive list.
- TRANSIENT - Static variable in class nxopen.cae.BaseIteration.IterationType
-
Transient Analysis Iteration
- TRANSIENT - Static variable in class nxopen.cae.responsesimulation.RSEvent.Type
-
- TRANSIENT - Static variable in class nxopen.cae.Result.SolutionType
-
Transient
- TRANSIENT - Static variable in class nxopen.cae.SimLoadSet.Type
-
Transient Excitation Load Set.
- transientChildren - Variable in class nxopen.BasePart.TransientStatus
-
Part has transient children
- TransientObject - Interface in nxopen
-
A base class for all NXOpen transient objects
- transientPartPersistencePolicy() - Method in interface nxopen.Session
-
Returns the persistence policy for transient parts in the session
License requirements: None.
- TransientResultsReductionBuilder - Interface in nxopen.cae
-
- TransientResultsReductionBuilder.EvaluationError - Class in nxopen.cae
-
evaluation error options
- TransientResultsReductionBuilder.IncompatibleResults - Class in nxopen.cae
-
Incompatible results options
- TransientResultsReductionBuilder.NoData - Class in nxopen.cae
-
No data options
- TransientStatus() - Constructor for class nxopen.BasePart.TransientStatus
-
- TransientStatus(boolean, boolean, boolean, boolean) - Constructor for class nxopen.BasePart.TransientStatus
-
Constructor for the TransientStatus object.
- TransientText - Interface in nxopen.display
-
Represents temporary text strings which can be used for Temporary Display .
- TransientText.AbsoluteTextSizeData - Class in nxopen.display
-
- TransientText.StandardTextRef - Class in nxopen.display
-
This enumerated type specifies the type of reference point used in the text box
for standard_text methods.
- TransientText.TextSize - Class in nxopen.display
-
Provides a way to specify the size of the desired text, as small,
medium or large (normal is a synonym for medium).
- TransientText.ViewType - Class in nxopen.display
-
the view or views in which the transient text is to be displayed.
- transientTime() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the transient time
License requirements: None.
- transition() - Method in interface nxopen.cae.LocalRemeshBuilder
-
Returns the transition
License requirements: None.
- TRANSITION - Static variable in class nxopen.cae.MeshFromBoundaryBuilder.RailOption
-
transitioned layer
- TRANSITION - Static variable in class nxopen.cam.OperationBuilder.OptimizationDistanceTypes
-
transition
- TRANSITION - Static variable in class nxopen.features.GuidedExtensionBuilderEx.SegmentType
-
Transition segment type
- transition() - Method in interface nxopen.features.StudioSurfaceBuilder
-
Returns the transition control
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- transition() - Method in interface nxopen.features.StudioSurfaceBuilderEx
-
Returns the transition control
License requirements: None.
- transition() - Method in interface nxopen.geometricutilities.TransitionLawNodeBuilder
-
Returns the transition type
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- TRANSITION - Static variable in class nxopen.tooling.GuidedExtensionBuilder.SegmentType
-
Transition segment type
- TRANSITION_OBJECT - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.ObjectType
-
Transition object
- TransitionBuilder - Interface in nxopen.features.shipdesign
-
This is to create a
TransitionBuilder
which is used to create Detail Design elements from Basic Design elements.
- TransitionBuilder.TransitionMethods - Class in nxopen.features.shipdesign
-
Transition Method.
- TransitionBuilder.TransitionTypes - Class in nxopen.features.shipdesign
-
Transition Type.
- TransitionCurveBuilder - Interface in nxopen.geometricutilities
-
This class provides ability to create a transition(bridge) curve between two adjacent setback curves.
- TransitionCurveBuilder.TangentDirections - Class in nxopen.geometricutilities
-
Tangent direction options
- TransitionCurveBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- transitionCurveList() - Method in interface nxopen.features.BlendCornerBuilder
-
Returns the transition curve list
License requirements: None.
- transitionDefinition() - Method in interface nxopen.die.DrawBeadBuilder
-
Returns the method used to build the transition between segments.
- transitionLaw() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the transition law
License requirements: None.
- TransitionLawNodeBuilder - Interface in nxopen.geometricutilities
-
Represents a law node with transition type.
- TransitionLawNodeBuilder.TransitionType - Class in nxopen.geometricutilities
-
Represents a transition type at a law node.
- TransitionLawNodeBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- transitionLinkFlag() - Method in interface nxopen.geometricutilities.ConicCrossSection
-
Returns the flag to link multi-transition law types
License requirements: None.
- transitionMethod() - Method in interface nxopen.facet.LocalOffsetBuilder
-
Returns the type of transition region
License requirements: None.
- transitionMethod() - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
Returns the transition method.
- transitionObjects() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the transition curves or points used in creating transition parting surface.
- transitionOption() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the transition option
License requirements: None.
- transitionOptions() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the transition options
License requirements: None.
- transitionRadius - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- transitionsBetweenPaths() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to generate transition points between paths
License requirements: None.
- transitionShapeControl() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the transition shape control
License requirements: None.
- transitionSurfType() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the type of transition surface to be created.
- transitionsWithinPaths() - Method in interface nxopen.cam.InspectionCollisionAvoidanceBuilder
-
Returns a flag to indicate whether to generate transition points within paths
License requirements: None.
- transitionType() - Method in interface nxopen.features.IFormBuilder
-
Returns the transition options for local surface deformation
License requirements: None.
- transitionType() - Method in interface nxopen.features.shipdesign.TransitionBuilder
-
Returns the transition type.
- transitionType() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder
-
Returns the type of transition the path takes to reach the transition end point.
- transitionType() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the transition type of a straight segment
License requirements: mechanisms ("MECHANISMS")
.
- transitionVelocity() - Method in interface nxopen.motion.AnalyticalContactPropertyBuilder
-
Returns the transition velocity
License requirements: mechanisms ("MECHANISMS")
.
- transitionVelocity - Variable in class nxopen.uf.UFMotion.ContactParameters
-
- transitionVelocityExpression() - Method in interface nxopen.motion.CurveContactAdams
-
Returns the transition velocity expression
License requirements: None.
- transitionVelocityExpression() - Method in interface nxopen.motion.CurveContactRecurdyn
-
Returns the transition velocity expression
License requirements: None.
- TRANSLATE - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Transform
-
translate
- TRANSLATE - Static variable in class nxopen.cam.OperationTransformBuilder.Transform
-
translate
- TRANSLATE - Static variable in class nxopen.features.StudioXformBuilder.Types
-
Deprecated.
Translate type of Xform
- TRANSLATE - Static variable in class nxopen.features.StudioXformBuilderEx.Types
-
Translate type of Xform
- TRANSLATE - Static variable in class nxopen.features.StyledSweepBuilder.SectionOrientationOptions
-
Translate
- TRANSLATE - Static variable in class nxopen.geometricutilities.AlongPathPattern.PathOptions
-
path is a translation from the selected path.
- translate(Vector3d) - Method in interface nxopen.geometricutilities.BoundaryDefinitionBuilder
-
Translates the boundary from its current position using the direction and the magnitude of a vector.
- translate(TransformerData.ObjectType, double) - Method in interface nxopen.geometricutilities.TransformerData
-
Translates the tool.
- TRANSLATE - Static variable in class nxopen.weld.JointmarkBuilder.Method
-
Translate
- TRANSLATE - Static variable in class nxopen.weld.TransformBuilder.TransformationTypes
-
Translate
- TRANSLATE - Static variable in class nxopen.weld.WeldPointExitBuilder.MethodUsed
-
Feature was created using the translate method.
- TRANSLATE - Static variable in class nxopen.weld.WeldPointMethod
-
translate existing points
- TRANSLATE_BETWEEN_TWO_POINTS - Static variable in class nxopen.features.MoveFaceBuilder.Types
-
Move faces in the direction and distance defined by the two points
- TRANSLATE_DIRECTION_AND_DISTANCE - Static variable in class nxopen.features.MoveFaceBuilder.Types
-
Direction and Distance for moving the faces
- TRANSLATE_NORMAL_TO_FACE_OR_CURVE - Static variable in class nxopen.features.StudioXformBuilder.Types
-
Deprecated.
Along normal type of Xform
- TRANSLATE_ONLY - Static variable in class nxopen.cae.ElementTranslateBuilder.CopyType
-
translate without copying elements
- TRANSLATE_ONLY - Static variable in class nxopen.cae.NodeTranslateBuilder.CopyType
-
translate only
- TRANSLATE_PCSORIGIN - Static variable in class nxopen.cam.InspectionAlignmentBuilder.AlignTypes
-
Translate the PCS
- translateCenter(Vector3d) - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Translates the center of the die handling core by the specified amount.
- translateCenter(Vector3d) - Method in interface nxopen.die.HoleChildBuilder
-
Translates the center of the die hole by the specified amount.
- translateCsys() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the coordinate system that defines the translate offset directions.
- translateCsys() - Method in interface nxopen.weld.TransformBuilder
-
Returns the coordinate system that defines the translate offset directions.
- translateCsys() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the coordinate system that a point is to be translated about.
- translateDistance() - Method in interface nxopen.die.AddendumSectionBuilder
-
- translateDistance() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the distance dimension used for translation type of instancing.
- translateExpression() - Method in interface nxopen.motion.LinkInitialVelocity
-
Returns the translate magnitue expression.
- translateLocation(Vector3d) - Method in interface nxopen.die.PadChildBuilder
-
Translates the location of the die pad by the specified amount.
- translatePierceHoleLocation(Vector3d) - Method in interface nxopen.die.PierceHoleChildBuilder
-
Translates the center of the die pierce hole by the specified amount.
- translateString(String, int) - Method in interface nxopen.uf.UFText
-
- translateString2(String) - Method in interface nxopen.uf.UFText
-
- translateToNewOrigin() - Method in interface nxopen.formboard.FormboardLayoutBuilder
-
Translates the formboard geometry so that it matches the new main run origin, this is a more
lightweight operation than the full UpdateLayout operation.
- translateUnselectedLayer() - Method in interface nxopen.DxfdwgImporter
-
Returns the TranslateUnselectedLayer command - if set to true, unselected layers will be translated
License requirements: None.
- translateVariable(String) - Method in interface nxopen.uf.UF
-
- translateVector() - Method in interface nxopen.motion.LinkInitialVelocity
-
Returns the translate vector
License requirements: None.
- translateWall() - Method in interface nxopen.die.AddendumSectionBuilder
-
- translateX() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the expression containing the value of the x translation distance.
- translateX() - Method in interface nxopen.weld.TransformBuilder
-
Returns the expression containing the value of the x translation distance.
- translateXDistance() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the tran x dist
License requirements: ugweld ("UG WELD")
.
- translateY() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the expression containing the value of the y translation distance.
- translateY() - Method in interface nxopen.weld.TransformBuilder
-
Returns the expression containing the value of the y translation distance.
- translateYDistance() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the trans y dist
License requirements: ugweld ("UG WELD")
.
- translateZ() - Method in interface nxopen.weld.JointmarkBuilder
-
Returns the expression containing the value of the z translation distance.
- translateZ() - Method in interface nxopen.weld.TransformBuilder
-
Returns the expression containing the value of the z translation distance.
- translateZDistance() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the translate distance for weld points in z axis direction.
- TRANSLATION - Static variable in class nxopen.features.EmbossLimit.EndcapMethod
-
Indicates End-Cap geometry is a translation along a user controlled vector.
- TRANSLATION - Static variable in class nxopen.features.GeomcopyBuilder.TransformTypes
-
translation along a direction
- TRANSLATION - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.TransformMethods
-
Translation method
- translation - Variable in class nxopen.layout2d.Component.TransformData
-
- TRANSLATION - Static variable in class nxopen.motion.GcouplerMovementTypes
-
Translation movement type
- TRANSLATION - Static variable in class nxopen.motion.LinkCouplerCoupleBuilder.MeasurementChoices
-
Translation
- TRANSLATION - Static variable in class nxopen.uf.UFMotion.MotionType
-
- TRANSLATION_ALONG_DIRECTION - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Translation along direction
- TRANSLATION_IN_PLANE - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions
-
Translation in the plane
- TRANSLATION_OF_FACES - Static variable in class nxopen.uf.UFModl.OffsetTransType
-
- TRANSLATION_X - Static variable in class nxopen.cae.optimization.Response
-
- TRANSLATION_X - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- TRANSLATION_Y - Static variable in class nxopen.cae.optimization.Response
-
- TRANSLATION_Y - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- TRANSLATION_Z - Static variable in class nxopen.cae.optimization.Response
-
- TRANSLATION_Z - Static variable in class nxopen.geometricutilities.TransformerData.ObjectType
-
- TRANSLATIONAL - Static variable in class nxopen.motion.BushingGeneralCoefficientMoveTypes
-
translational type
- TRANSLATIONAL - Static variable in class nxopen.motion.ScalarForceBuilder.DirectionType
-
for Translational direction
- TRANSLATIONAL_DAMPING - Static variable in class nxopen.motion.BushingGeneralCoefficientTypes
-
translational damping component
- TRANSLATIONAL_DEFORMATION - Static variable in class nxopen.cae.Result.Quantity
-
- TRANSLATIONAL_MAGNITUDE - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- TRANSLATIONAL_PRELOAD - Static variable in class nxopen.motion.BushingGeneralCoefficientTypes
-
translational preload component
- TRANSLATIONAL_STIFFNESS - Static variable in class nxopen.motion.BushingGeneralCoefficientTypes
-
translational stiffness component
- translationalCoefficients() - Method in interface nxopen.motion.BushingCoefficients
-
- translationalComponentEndA() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the translational component end A of the damper element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- translationalComponentEndA() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the translational component end A of the spring element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- translationalComponentEndB() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the translational component end B of the damper element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- translationalComponentEndB() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the translational component end B of the spring element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- translationalDamping - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- TranslationalDDAMExcitation - Interface in nxopen.cae.responsesimulation
-
Represents an DDAM excitation.
- TranslationalDDAMExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- translationAllowed() - Method in interface nxopen.motion.JointDefine
-
Returns the options of allowing rotation.
- TranslationalNodalFunctionExcitation - Interface in nxopen.cae.responsesimulation
-
- TranslationalNodalFunctionExcitationBuilder - Interface in nxopen.cae.responsesimulation
-
- TranslationalNodalFunctionExcitationBuilder.RotationAxisType - Class in nxopen.cae.responsesimulation
-
Represents the rotation axis type.
- translationalPreload - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- translationalStictionTransitionVelocity() - Method in interface nxopen.motion.JointFrictionLms
-
Returns the translational velocity tolerance
License requirements: None.
- translationalStiffness() - Method in interface nxopen.cae.SpringEADBuilder
-
Returns the expression stiffness operator gets spring translational stiffness value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- translationalStiffness - Variable in class nxopen.uf.UFMotion.GeneralBushing
-
- translationalViscousDamping() - Method in interface nxopen.cae.DamperEADBuilder
-
Returns the expression viscous damping operator gets damper translational viscous damping value
License requirements: nx_masterfem ("Finite Element Modeling")
.
- translationAmount() - Method in interface nxopen.cae.optimization.TBSTopologyLinkCondition
-
- translationArbitraryPlane() - Method in interface nxopen.features.StudioXformBuilder
-
- translationArbitraryVector() - Method in interface nxopen.features.StudioXformBuilder
-
- translationDirection() - Method in interface nxopen.features.StudioXformBuilder
-
- translationDirection1 - Variable in class nxopen.assemblies.DegreesOfFreedom
-
First translation direction.
- translationDirection1Status - Variable in class nxopen.assemblies.DegreesOfFreedom
-
First translation direction status.
- translationDirection2 - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Second translation direction.
- translationDirection2Status - Variable in class nxopen.assemblies.DegreesOfFreedom
-
Second translation direction status.
- translationVector() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the translation vector for translation type of instancing.
- translationX() - Method in interface nxopen.DxfdwgImporter
-
Returns the X translation - The delta X value for repositioning the model data
License requirements: None.
- translationX() - Method in interface nxopen.motion.DriverMotionsData
-
Returns the translation on the x axis
License requirements: mechanisms ("MECHANISMS")
.
- translationY() - Method in interface nxopen.DxfdwgImporter
-
Returns the Y translation - The delta Y value for repositioning the model data
License requirements: None.
- translationY() - Method in interface nxopen.motion.DriverMotionsData
-
Returns the translation on the y axis
License requirements: mechanisms ("MECHANISMS")
.
- translationZ() - Method in interface nxopen.DxfdwgImporter
-
Returns the Z translation - The delta Z value for repositioning the model data
License requirements: None.
- translationZ() - Method in interface nxopen.motion.DriverMotionsData
-
Returns the translation on the z axis
License requirements: mechanisms ("MECHANISMS")
.
- translucency() - Method in interface nxopen.assemblies.ProductOutlineBuilder
-
Returns the translucency of faceted bodies/objects defined in Product Outline.
- translucency() - Method in interface nxopen.cae.SimBCDisplay
-
Returns the BC display translucency factor
this option specifies the translucency of the BC display symbol.
- translucency() - Method in interface nxopen.features.RasterImage
-
Returns the translucency of the raster image, in range [0.0, 1.0]
License requirements: None.
- translucency() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the translucency of the vision area.
- translucency() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the translucency
License requirements: None.
- translucency() - Method in interface nxopen.mechatronics.DisplayChangerBuilder
-
Returns the initial translucency display property.
- translucency() - Method in interface nxopen.preferences.PartDrafting
-
Returns the flag indicating whether to display solids in shaded member views with translucency.
- translucency() - Method in interface nxopen.preferences.PartObject
-
Returns the translucency value
License requirements: None.
- translucency - Variable in class nxopen.preferences.PartVisualizationEmphasis.LayersOptions
-
the translucency of de-emphasized shaded geometry when
the See-Thru style is set to Layers.
- translucency - Variable in class nxopen.preferences.PartVisualizationEmphasis.OriginalColorShellOptions
-
the translucency of de-emphasized shaded geometry when
the See-Thru style is set to Original Color Shell.
- translucency - Variable in class nxopen.preferences.PartVisualizationEmphasis.ShellOptions
-
the translucency of de-emphasized shaded geometry when
the See-Thru style is set to Shell.
- translucency() - Method in interface nxopen.preferences.SessionVisualizationVisual
-
Returns the translucency flag.
- translucency() - Method in interface nxopen.tooling.ManufacturingGeometryBuilder
-
Returns the translucency to specify the group faces display.
- translucencyAsBoundaryFacesToggle() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Returns the translucency as boundary faces toggle
License requirements: None.
- translucencyInsideNegative() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the negative inside translucency
License requirements: None.
- translucencyInsidePositive() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the positive inside translucency
License requirements: None.
- translucencyOption() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Returns the translucency option for the selected or non-selected region faces
License requirements: None.
- translucencyOutsideNegative() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the negative outside tanslucency
License requirements: None.
- translucencyOutsidePositive() - Method in interface nxopen.geometricanalysis.DraftAnalysisBuilder
-
Returns the positive outside translucenty
License requirements: None.
- translucencyValue() - Method in interface nxopen.cam.SimulationOptionsBuilder
-
Returns the translucency value
License requirements: None.
- translucencyValueScale() - Method in interface nxopen.tooling.MWDefineRegionsBuilder
-
Returns the translucency value for the selected or non-selected region faces
License requirements: None.
- TRANSLUCENT - Static variable in class nxopen.cae.Post.FaceStyle
-
- TRANSLUCENT - Static variable in class nxopen.cae.Post.LimitDisplay
-
- TRANSLUCENT_HARD - Static variable in class nxopen.display.ImageBasedLighting.ShadowsType
-
Hard-edged, precise shadows will be generated using a ray-tracing
algorithm.
- TRANSLUCENT_HARD - Static variable in class nxopen.display.LightBuilder.ShadowType
-
Hard-edged, precise shadows will be generated using a ray-tracing
algorithm.
- translucentPlanes() - Method in interface nxopen.preferences.ViewSection
-
Returns the translucent plane setting view section preference.
- TRANSMISSIBILITY - Static variable in class nxopen.cae.XyFunctionDataType
-
Function is Transmissibility
- TRANSMISSIBILITY - Static variable in class nxopen.cae.XyFunctionGeneralType
-
Function is Transmissibility
- TRANSMISSIBILITY - Static variable in class nxopen.cae.XyFunctionResponseType
-
Function is Transmissibility
- TransmissibilityEvaluationSetting - Interface in nxopen.cae.responsesimulation
-
- TransmissibilityEvaluationSettingBuilder - Interface in nxopen.cae.responsesimulation
-
- TransmissibilityEvaluationSettingBuilder.MotionType - Class in nxopen.cae.responsesimulation
-
This enum defines input motion type
- transmission() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder
-
Returns the vehicle transmission type.
- transmission() - Method in interface nxopen.HumanPosturePredictionBuilder
-
Returns the transmission type: automatic or manual.
- TRANSMITTED_RADIATION - Static variable in class nxopen.cae.Result.Quantity
-
- transmitterEntry() - Method in interface nxopen.mechatronics.PhysicsManager
-
- TransmitterEntry - Interface in nxopen.mechatronics
-
Represents the Transmitter Entry.
- TransmitterEntryBuilder - Interface in nxopen.mechatronics
-
- TransmitterEntryBuilder.TransmitterEntryCandidateType - Class in nxopen.mechatronics
-
represents the candidate option.
- TransmitterEntryCollection - Interface in nxopen.mechatronics
-
Represents a collection of Transmitter Entry.
- transmitterExit() - Method in interface nxopen.mechatronics.PhysicsManager
-
- TransmitterExit - Interface in nxopen.mechatronics
-
Represents the Transmitter Exit.
- TransmitterExitBuilder - Interface in nxopen.mechatronics
-
- TransmitterExitCollection - Interface in nxopen.mechatronics
-
Represents a collection of Transmitter Exit.
- transMotion() - Method in interface nxopen.tooling.RunnerBuilder
-
Returns the transform motion to rotate the section curves.
- transparency - Variable in class nxopen.DisplayManager.J3dMaterial
-
0.0 is opaque, 1.0 is totally transparent
- transparencyColorOption() - Method in interface nxopen.display.ImageBaseBuilder
-
Returns the transparency color option
License requirements: None.
- transparencyTolerance() - Method in interface nxopen.display.DecalBuilder
-
Returns the transparency tolerance
License requirements: None.
- transparentShadows - Variable in class nxopen.uf.UFDisp.ShadeOptions
-
- TRANSPORT_HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity
-
- TransportSurface - Interface in nxopen.mechatronics
-
Represents the Transport Surface class.
- TransportSurfaceBuilder - Interface in nxopen.mechatronics
-
- TransportSurfaceBuilder.MoveType - Class in nxopen.mechatronics
-
the motion types.
- TransportSurfaceCollection - Interface in nxopen.mechatronics
-
Represents a collection of Transport Surface.
- transportSurfaces() - Method in interface nxopen.mechatronics.PhysicsManager
-
- transpose(double[]) - Method in interface nxopen.uf.UFMtx2
-
- transpose(double[]) - Method in interface nxopen.uf.UFMtx3
-
- transpose(double[]) - Method in interface nxopen.uf.UFMtx4
-
- transStartEdge - Variable in class nxopen.uf.UFModl.SmjoggleData
-
- transType - Variable in class nxopen.uf.UFStudio.StybldCurveTrans
-
- transType - Variable in class nxopen.uf.UFStudio.StybldShapeTrans
-
- transveralInsertArea() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the transveral insert area
License requirements: None.
- TRANSVERSAL_FRAMES - Static variable in class nxopen.annotations.ShipDimensionBuilder.GroupType
-
Group type Transversal frames
- TRANSVERSAL_INSERT_AREA - Static variable in class nxopen.annotations.FrameBarElements
-
- transversalInsertAreaLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label color
License requirements: None.
- transversalInsertAreaLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label font
License requirements: None.
- transversalInsertAreaLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label italicized
License requirements: None.
- transversalInsertAreaLabelName() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the transversal insert area label name
License requirements: None.
- transversalInsertAreaLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label width
License requirements: None.
- transversalInsertAreaStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
-
Returns the style transversal insert area
License requirements: None.
- transversalInsertAreaTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic color
License requirements: None.
- transversalInsertAreaTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the transversal insert area tic display type
License requirements: None.
- transversalInsertAreaTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic font
License requirements: None.
- transversalInsertAreaTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic length
License requirements: None.
- transversalInsertAreaTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic width
License requirements: None.
- TRANSVERSE - Static variable in class nxopen.features.shipdesign.BulkHeadsBuilder.BulkheadType
-
- TRANSVERSE - Static variable in class nxopen.features.shipdesign.InsertFramesBuilder.Types
-
- TRANSVERSE_BULKHEAD - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types
-
Transverse Bulkhead type
- TRANSVERSE_BULKHEAD - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType
-
- TRANSVERSE_FRAMES - Static variable in class nxopen.annotations.FrameBarElements
-
- TRANSVERSE_FRAMES - Static variable in class nxopen.features.shipdesign.ShipSectionBuilder.XFilter
-
- TRANSVERSE_SHEAR_STRESS - Static variable in class nxopen.cae.LaminatePly.InterLaminarFailureTheoryType
-
Transverse Shear Stress inter-laminar failure criteria
- TransverseBulkhead - Interface in nxopen.features.shipdesign
-
Represents a Transverse Bulkhead feature.
- TransverseBulkheadBuilder - Interface in nxopen.features.shipdesign
-
- TransverseBulkheadBuilder.Types - Class in nxopen.features.shipdesign
-
Indicates the method that is being used to define the mold face of the transverse bulkhead.
- transverseFrames() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the transverse frames
License requirements: None.
- transverseFramesExtendBegin() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the extended tic from which display to be started
License requirements: None.
- transverseFramesExtendColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the extended tic color
License requirements: None.
- transverseFramesExtendFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the extended tic font
License requirements: None.
- transverseFramesExtendFrequency() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the extended tic display frequency
License requirements: None.
- transverseFramesExtendLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the extended tic length
License requirements: None.
- transverseFramesExtendWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the extended tic width
License requirements: None.
- transverseFramesLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label color
License requirements: None.
- transverseFramesLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label font
License requirements: None.
- transverseFramesLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label italicized
License requirements: None.
- transverseFramesLabelName() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label name
License requirements: None.
- transverseFramesLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label width
License requirements: None.
- transverseFramesSkipLabelBegin() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label from which skip to be started
License requirements: None.
- transverseFramesSkipLabelFrequency() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label skip frequency
License requirements: None.
- transverseFramesSkipTicBegin() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic from which skip to be started
License requirements: None.
- transverseFramesSkipTicFrequency() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic skip frequency
License requirements: None.
- transverseFramesStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
-
Returns the style transverse frames
License requirements: None.
- transverseFramesTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic color
License requirements: None.
- transverseFramesTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the transverse frames tic display type
License requirements: None.
- transverseFramesTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic font
License requirements: None.
- transverseFramesTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic length
License requirements: None.
- transverseFramesTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic width
License requirements: None.
- TRAPEZOID - Static variable in class nxopen.tooling.BlankNestingBuilder.LayoutTypeSpecification
-
Rotate blank 180 degrees and auto-position it along x-axis with trapezoid bounding box.
- TRAPEZOIDAL - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes
-
Trapezoidal
- TRAPEZOIDAL - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form
-
Form: Trapezoidal
- TRAPEZOIDAL - Static variable in class nxopen.cam.HoleBossGeom.FormTypes
-
Form: Trapezoidal
- TRAPEZOIDAL - Static variable in class nxopen.cam.ThreadToolBuilder.InsertShapes
-
Trapezoidal insert shape
- TRAPEZOIDAL - Static variable in class nxopen.tooling.RunnerBuilder.SectionType
-
Use trapezoidal section type.
- traUdeSet() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the Traverse UDE Set
License requirements: cam_base ("CAM BASE")
.
- TRAVEL - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionBinder
-
The process action for binder is travel to other draw components.
- TRAVEL - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionDie
-
The process action for die is travel to other draw components.
- TRAVEL - Static variable in class nxopen.tooling.LsdynaGeometryPreparationBuilder.ProcessActionPunch
-
The process action for punch is travel to other draw components.
- TRAVELING - Static variable in class nxopen.die.ClampingSlotBuilder.Types
-
- TRAVERSAL - Static variable in class nxopen.cam.CamOperationMotionType
-
- TRAVERSAL - Static variable in class nxopen.cam.CamPathMotionType
-
- TRAVERSAL - Static variable in class nxopen.cam.MoveBuilder.Motion
-
Traversal
- traversal() - Method in interface nxopen.cam.PathDisplayColors
-
Returns the color traversal
License requirements: None.
- TraversalSettings() - Constructor for class nxopen.uf.UFPlist.TraversalSettings
-
- TraversalSettings(boolean, boolean, boolean) - Constructor for class nxopen.uf.UFPlist.TraversalSettings
-
- TRAVERSE - Static variable in class nxopen.cam.AcrossVoids.MotionTypes
-
Traverse
- TRAVERSE - Static variable in class nxopen.cam.CutParametersCutConnectionTypes
-
Cut connection: Traverse
- TRAVERSE - Static variable in class nxopen.tooling.EdgePatchBuilder.SelectTypes
-
Traverse types
- TRAVERSE - Static variable in class nxopen.tooling.TrimRegionBuilder.BoundaryOption
-
use traverse loop to select boundary object
- traverseClearanceBuilder() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the traverse clearance
License requirements: None.
- traverseDistanceBuilder() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the traverse distance builder
License requirements: None.
- traverseInteriorEdges() - Method in interface nxopen.cam.GeometrySet
-
Returns the traverse interior edges flag
License requirements: None.
- traverseInteriorEdges() - Method in interface nxopen.cam.SurfaceRegions
-
Returns the traverse interior edges flag
License requirements: None.
- traverseInteriorEdges() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the traverse interior edges
License requirements: None.
- traverseInteriorEdges() - Method in interface nxopen.tooling.FormingInsertBuilder
-
Returns the indication to traverse interior edges of forming region.
- traverseInteriorEdges - Variable in class nxopen.uf.UFWave.AskLinkRegionSourcesData
-
- traverseinteriorloops - Variable in class nxopen.FaceSlotFacesRule.DefiningData
-
true if interrior loops are to be processed.
- TraverseLoopBuilder - Interface in nxopen.tooling
-
The builder class for Traverse Loop component which assists you
to select or traverse a string of adjacent curves or edges.
- TraverseLoopBuilder.CheckGapData - Class in nxopen.tooling
-
- TraverseLoopCollection - Interface in nxopen.tooling
-
Represents a collection of TraverseLoopbuilder
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- traverseLoops() - Method in interface nxopen.tooling.ToolingManager
-
Returns the TraverseLoopCollection instance belonging to this part .
- traverseOpenPasses() - Method in interface nxopen.cam.MillCutParameters
-
Returns the open passes
License requirements: None.
- traversePostCommands() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the traverse post commands
License requirements: None.
- traverseType() - Method in interface nxopen.cam.NcmTransferBuilder
-
Returns the traverse types
License requirements: None.
- travserseinteriorloops - Variable in class nxopen.FaceRibFacesRule.DefiningData
-
true if interrior loops are to be processed.
- treadHeight() - Method in interface nxopen.linedesigner.StairwayEquipmentBuilder
-
Returns the tread height
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- TREAT_AS_CONIC - Static variable in class nxopen.Sketch.AddEllipseOption
-
- TREAT_AS_ELLIPSE - Static variable in class nxopen.Sketch.AddEllipseOption
-
- TREAT_AS_LOST - Static variable in class nxopen.uf.UFClone.FamilyTreatment
-
- treatAsRigid() - Method in interface nxopen.motion.FlexBodyBuilder
-
Returns the treat as rigid option
License requirements: None.
- treatment() - Method in interface nxopen.features.sheetmetal.HoleTreatmentBuilder
-
Returns the treatment type option menu value
License requirements: None.
- treatmentType() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the treatment type
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- treatmentType() - Method in interface nxopen.features.sheetmetal.CornerTreatmentBuilder
-
Returns the treatment type option menu value
License requirements: None.
- treatmentType() - Method in interface nxopen.features.sheetmetal.ThreeBendCornerBuilder
-
Returns the corner treatment type.
- treatOneDegreeBsplineAsPolyline() - Method in interface nxopen.preferences.SessionModeling
-
Returns the option to treat single degree bspline as polyline
License requirements: None.
- treatOutdatedAsPass - Variable in class nxopen.uf.UFClone.ValidationOpts
-
- treatWarningAsFail() - Method in interface nxopen.validate.ValidatorOptions
-
Returns the configuration of treating warning status as fail status.
- treatWarningAsPass - Variable in class nxopen.uf.UFClone.ValidationOpts
-
- Tree - Interface in nxopen.blockstyler
-
Represents the Tree block in block styler automation.
- Tree.AskEditControlCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when edit is attempted on any cell.
- Tree.BeginLabelEditState - Class in nxopen.blockstyler
-
Represents the state to allow/disallow the node label edit.
- Tree.ColumnDisplay - Class in nxopen.blockstyler
-
Represents the column display type.
- Tree.ColumnResizePolicy - Class in nxopen.blockstyler
-
Represents column resize policy.
- Tree.ColumnSortCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when column sort is attempted.
- Tree.ColumnSortOption - Class in nxopen.blockstyler
-
Represents the column sort option.
- Tree.ControlType - Class in nxopen.blockstyler
-
Represents the type of edit options.
- Tree.EditControlOption - Class in nxopen.blockstyler
-
Represents the options to accept or reject the changed value.
- Tree.EndLabelEditState - Class in nxopen.blockstyler
-
Represents the state to accept/reject the edited label of node.
- Tree.IsDragAllowedCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when node is dragged.
- Tree.IsDropAllowedCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when an attempt is made to drop the node on any target node.
- Tree.NodeInsertOption - Class in nxopen.blockstyler
-
Represents the node insert option which is used while inserting the node in tree.
- Tree.OnBeginLabelEditCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when label edit is attempted on any column.
- Tree.OnDefaultActionCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when double clicked is performed on the node.
- Tree.OnDeleteNodeCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when the node is deleted from tree.
- Tree.OnDropCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when nodes are dropped on any target node.
- Tree.OnDropMenuCallback - Interface in nxopen.blockstyler
-
Represents the callback to show the menu when nodes are dragged using MB3 or right mouse click, and dropped on any target node.
- Tree.OnEditOptionSelectedCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when user selects an option in edit-control set by
BlockStyler.Tree.AskEditControlCallback.
- Tree.OnEndLabelEditCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when label edit is completed on any column.
- Tree.OnExpandCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when the node is expanded.
- Tree.OnInsertColumnCallback - Interface in nxopen.blockstyler
-
- Tree.OnInsertNodeCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when the node is inserted.
- Tree.OnMenuCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when MB3 or right click is attempted on node or tree.
- Tree.OnMenuSelectionCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when one of the menu option is selected.
- Tree.OnPreSelectCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when pre selection is attempted on node.
- Tree.OnSelectCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when the node is selected.
- Tree.OnStateChangeCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when the state icon is clicked.
- Tree.StateIconNameCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when the node state is set
by
Node.setState(int)
and the corresponding
state icon of node state is not known.
- Tree.ToolTipTextCallback - Interface in nxopen.blockstyler
-
Represents the callback which gets called when tree seeks the tooltip.
- TreeListMenu - Interface in nxopen.blockstyler
-
Represents a menu class utilized by
Tree
.
- TreeListNode - Interface in nxopen
-
Represents a TreeList Node Object .
- treeWidth() - Method in interface nxopen.blockstyler.Explorer
-
Returns the TreeWidth for the Navigation Tree.
- TRESCA - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressTypeEnum
-
Tresca
- TRESCA - Static variable in class nxopen.uf.UFSf.DursolStressType
-
- TRI - Static variable in class nxopen.cae.ElementTypes.Shape
-
Triagular
- TRI - Static variable in class nxopen.drawings.View2dOrientBuilder.Type
-
trimetric view
- TRIA3 - Static variable in class nxopen.uf.UFSf.ElementType
-
- TRIA6 - Static variable in class nxopen.uf.UFSf.ElementType
-
- TRIA_SHELL - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Tria shell
- TRIA_TO2TRIA - Static variable in class nxopen.cae.ElementSplitBuilder.Types
-
Tria to 2 Tria
- TRIA_TO4TRIA - Static variable in class nxopen.cae.ElementSplitBuilder.Types
-
Tria to 4 Tria
- triadLocation() - Method in interface nxopen.preferences.PartVisualizationScreen
-
Returns the view triad location
License requirements: None.
- triadLocation() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
- triadVisibility() - Method in interface nxopen.preferences.PartVisualizationScreen
-
Returns the show view triad flag.
- triadVisibility() - Method in interface nxopen.preferences.SessionVisualizationScreen
-
- triadVisibility() - Method in interface nxopen.View
-
Returns the visibility of the view triad in the view.
- TRIANGLE - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Triangle with point down
- TRIANGLE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.MeshElement
-
Generate 2D triangle mesh element
- TRIANGLE - Static variable in class nxopen.cae.MarkerType0d
-
- TRIANGLE - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeMarker
-
Triangle marker
- TRIANGLE - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeMarker
-
Triangle marker
- TRIANGLE - Static variable in class nxopen.cae.xyplot.PointMarker
-
Triangle marker
- TRIANGLE - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Triangle
- TRIANGLE - Static variable in class nxopen.diagramming.SheetBordersAndZonesBuilder.TrimmingMarkStyleType
-
Triangle
- TRIANGLE - Static variable in class nxopen.diagramming.TrimmingMarkStyleType
-
Triangle
- TRIANGLE - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.MeshElement
-
Generate 2D triangle mesh element
- TRIANGLE - Static variable in class nxopen.drawings.TrimmingMarkStyleType
-
Triangle
- TRIANGLE - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.InstructionFieldsType
-
Represents that the triangle Instruction field will be created
- TRIANGLE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType
-
- TRIANGLE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum
-
- TRIANGLE - Static variable in class nxopen.geometricutilities.RectangularPattern.SimplifiedLayoutTypes
-
Triangle Layout
- TRIANGLE - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.CagePolylineVertexStyles
-
- TRIANGLE - Static variable in class nxopen.preferences.SubdivisionModelingPreferences.VertexStyleTypes
-
- TRIANGLE - Static variable in class nxopen.routing.WindCatcherBuilder.WindCatcherType
-
- TRIANGLE - Static variable in class nxopen.tooling.LsdynaKfileGeneratorBuilder.MeshElementType
-
Triangle element
- TRIANGLE - Static variable in class nxopen.tooling.UndersizeBuilder.Orbit
-
triangle
- TRIANGLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.FacetType
-
The facet topology is a triangle facet
- TRIANGLE - Static variable in class nxopen.weld.WeldBeadBuilder.Types
-
triangle shape
- TRIANGLE_DOWN - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType
-
Deprecated.
- TRIANGLE_DOWN - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SymbolType
-
- TRIANGLE_IN_TRIANGLE - Static variable in class nxopen.cae.MarkerType0d
-
- TRIANGLE_MARKER - Static variable in class nxopen.uf.UFDisp.PolyMarker
-
- TRIANGLE_MARKER - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker
-
- TRIANGLE_POINTED_DOWN - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- TRIANGLE_POINTED_UP - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType
-
- TRIANGLE_UP - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes
-
Triangle with point up
- TRIANGLE_UP - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType
-
Deprecated.
- TRIANGLE_UP - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SymbolType
-
- triangleBase() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the horizontal leg length of a triangular shaped bead.
- triangleDisplay() - Method in interface nxopen.STLCreator
-
Returns the Triangle Display - if set to true will will display triangles
License requirements: None.
- triangleHeight() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the vertical leg length of a triangular shaped bead.
- triangleMethod() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the method used to construct the triangle shape.
- triangleTolerance() - Method in interface nxopen.cam.PreprocessGeometryBuilder
-
Returns the default triangle tolerance
License requirements: cam_base ("CAM BASE")
.
- triangleType() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the method used to indicate the type of triangle to create.
- TRIANGULAR - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder.Types
-
Triangular
- TRIANGULAR_PATCH - Static variable in class nxopen.features.NSidedSurfaceBuilder.SurfaceType
-
Triangular Patch
- triangularFrame() - Method in interface nxopen.geometricanalysis.sectionanalysis.TriangularGridBuilder
-
Returns the triangular frame
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- TriangularFrameBuilder - Interface in nxopen.geometricutilities
-
- TriangularFrameBuilder.Subtypes - Class in nxopen.geometricutilities
-
Represents the triangular frame subtypes
- triangularGrid() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the triangular grid.
- TriangularGridBuilder - Interface in nxopen.geometricanalysis.sectionanalysis
-
Represents the triangular grid section specifications for a SectionAnalysisBuilder.
- TRIGGER - Static variable in class nxopen.mechatronics.GanttOperationBuilder.OperationType
-
Trigger operation
- TRIGON - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes
-
Insert shape: Trigon
- TRILATERAL_WELD - Static variable in class nxopen.annotations.LineWeldBuilder.WeldSymbolWeldAlongContourType
-
- TRIM - Static variable in class nxopen.annotations.TrimDimensionLineStyle
-
Dimension line will be trimmed when text crosses both extension lines
- trim() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder
-
- trim() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Trim
License requirements: cam_base ("CAM BASE")
.
- TRIM - Static variable in class nxopen.die.OutputCurvesBuilder.TrimCurveTypes
-
Regular trim curve.
- TRIM - Static variable in class nxopen.die.SteelInsertBuilder.InsertTypeOption
-
trim
- TRIM - Static variable in class nxopen.die.SteelInsertSegmentChildBuilder.InsertTypeOption
-
trim
- TRIM - Static variable in class nxopen.die.SteelInsertSegmentParentBuilder.InsertTypeOption
-
trim
- TRIM - Static variable in class nxopen.EndCutBlockBuilder.TaperTypeOption
-
- trim() - Method in interface nxopen.features.FlowBlendBuilder
-
- trim(MidSurfaceByFacePairsBuilder.TrimmingOptionType, NXObject[]) - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Trim the face pairs
License requirements: solid_modeling ("SOLIDS MODELING")
.
- TRIM - Static variable in class nxopen.features.shipdesign.EndCutBuilder.DraftTypes
-
If this Draft Type is set, the EndCut face will split and the left side face will be tapered.
- trim() - Method in interface nxopen.features.shipdesign.ManufacturingPreparationBuilder
-
Returns the trim option
License requirements: None.
- TRIM - Static variable in class nxopen.features.TrimCurve2Builder.Operation
-
- TRIM - Static variable in class nxopen.tooling.SplitSolidBuilder.OperationType
-
trim option
- TRIM - Static variable in class nxopen.tooling.TrimMoldComponentsBuilder.TrimMethod
-
Trim
- TRIM - Static variable in class nxopen.tooling.TrimSolidBuilder.TrimSolidAction
-
Action to do trim.
- TRIM - Static variable in class nxopen.uf.UFCam.GeomType
-
- TRIM_ALL - Static variable in class nxopen.features.StyledCornerBuilder.TrimAndSewMethodTypes
-
Trim blends and base wall
- TRIM_ALL - Static variable in class nxopen.uf.UFModl.TrimBlendOptions
-
- TRIM_AND_ATTACH - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendTrimMethodType
-
Trim and attach
- TRIM_AND_ATTACH - Static variable in class nxopen.uf.UFModl.TrimBlendOptions
-
- TRIM_AND_ATTACH_ALL - Static variable in class nxopen.features.StyledCornerBuilder.TrimAndSewMethodTypes
-
Trim and attach blends and base wall
- TRIM_AND_ATTACH_BLENDS - Static variable in class nxopen.features.StyledCornerBuilder.TrimAndSewMethodTypes
-
Trim and attach blends
- TRIM_AND_EXTEND - Static variable in class nxopen.EndCutBlockBuilder.TaperTypeOption
-
- TRIM_AND_SURFACE - Static variable in class nxopen.weld.EasyPatternBuilder.Types
-
Trim vector and surface vectors.
- TRIM_BLEND - Static variable in class nxopen.uf.UFModl.TrimBlendOptions
-
- TRIM_BLEND_LONG - Static variable in class nxopen.uf.UFModl.TrimBlendOptions
-
- TRIM_BLEND_SHORT - Static variable in class nxopen.uf.UFModl.TrimBlendOptions
-
- TRIM_BLENDS - Static variable in class nxopen.features.StyledCornerBuilder.TrimAndSewMethodTypes
-
Trim all blends
- TRIM_DIM_LINE - Static variable in class nxopen.uf.UFDrf.TrimDimLineStyle
-
- TRIM_EXTEND_END - Static variable in class nxopen.uf.UFCurve.TrimOpts
-
- TRIM_EXTEND_START - Static variable in class nxopen.uf.UFCurve.TrimOpts
-
- TRIM_GEOM_COLOR - Static variable in class nxopen.uf.UFCamPref.CamPref
-
- TRIM_INPUT_BLENDS - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendTrimMethodType
-
Trim input blends
- TRIM_INPUT_WALLS - Static variable in class nxopen.features.StyledBlendBuilder.StyledBlendTrimMethodType
-
Trim input walls
- TRIM_INSERT - Static variable in class nxopen.tooling.SpecialFormingBuilder.Types
-
- TRIM_INSIDE - Static variable in class nxopen.uf.UFCurve.TrimOpts
-
- TRIM_LEDGE - Static variable in class nxopen.die.AddendumSectionBuilder.SegmentType
-
Update trim ledge segment.
- TRIM_LINE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Process
-
trim line
- TRIM_LONG_AND_ATTACH - Static variable in class nxopen.uf.UFModl.TrimBlendOptions
-
- TRIM_OUTSIDE - Static variable in class nxopen.uf.UFCurve.TrimOpts
-
- TRIM_PLANE - Static variable in class nxopen.routing.FittingOverstockBuilder.TrimMethod
-
Single Trim Plane
- TRIM_TASK - Static variable in class nxopen.tooling.DieEngProcessUpdateManagerBuilder.Types
-
- TRIM_TO_INCR_LENGTH - Static variable in class nxopen.uf.UFCurve.TrimOpts
-
- TRIM_TO_ONE_BOUND - Static variable in class nxopen.uf.UFCurve.TrimOpts
-
- TRIM_TO_TOTAL_LENGTH - Static variable in class nxopen.uf.UFCurve.TrimOpts
-
- TRIM_TO_TWO_BOUND - Static variable in class nxopen.uf.UFCurve.TrimOpts
-
- TRIM_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- TRIMAND_EXTEND - Static variable in class nxopen.tooling.MWDesignPartingSurfaceBuilder.PartingSurfaceType
-
Trim and extend
- TrimAndExtend - Interface in nxopen.features
-
Represents a trim and extend feature
To create or edit an instance of this class, use
TrimAndExtendBuilder
Created in NX9.0.0
- TrimAndExtendBuilder - Interface in nxopen.features
-
- TrimAndExtendBuilder.ArrowSideType - Class in nxopen.features
-
Trim or Extend Arrow Side Results type.
- TrimAndExtendBuilder.OperationType - Class in nxopen.features
-
Trim or Extend operation type.
- trimAndExtendFromRegion() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the option for "trim and extend" from the cavity or core region.
- trimAndSewMethod() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the trim and sew method
License requirements: None.
- trimAngArray - Variable in class nxopen.uf.UFSmd.EvalTrimAnglesData
-
- trimAttachOpt - Variable in class nxopen.uf.UFModl.StycornerData
-
- trimBaseFaces() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns a value that indicates whether to trim base faces
License requirements: None.
- TrimBody - Interface in nxopen.features
-
Represents a Trim Body feature.
- trimBody(Tag, Tag, int) - Method in interface nxopen.uf.UFModeling
-
- TrimBody2 - Interface in nxopen.features
-
Represents a trim body feature.
- TrimBody2Builder - Interface in nxopen.features
-
Represents a
TrimBody2
builder for Trim Body
feature.
- TrimBodyBuilder - Interface in nxopen.features
-
Represents the trim body feature builder.
- TrimBodyBuilder.DirectionType - Class in nxopen.features
-
Represents the trim direction
- trimBound() - Method in interface nxopen.die.AddSurfBuilder
-
Returns the trimming boundary for the addendum surface.
- trimBoundary() - Method in interface nxopen.cam.CavityMillingBuilder
-
Returns the trim boundary
License requirements: None.
- trimBoundary() - Method in interface nxopen.cam.FaceMillingBuilder
-
Returns the trim boundary
License requirements: None.
- trimBoundary() - Method in interface nxopen.cam.MillAreaGeomBuilder
-
Returns the trim boundary builder
License requirements: None.
- trimBoundary() - Method in interface nxopen.cam.MillBoundaryGeomBuilder
-
Returns the trim boundary
License requirements: None.
- trimBoundary() - Method in interface nxopen.cam.PlanarMillingBuilder
-
Returns the trim boundary
License requirements: None.
- trimBoundary() - Method in interface nxopen.cam.PlungeMillingBuilder
-
Returns the trim boundary
License requirements: None.
- trimBoundary() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the trim boundary
License requirements: None.
- trimBoundary() - Method in interface nxopen.cam.VazlMillingBuilder
-
Returns the trim boundary
License requirements: None.
- trimBoundary() - Method in interface nxopen.cam.ZLevelMillingBuilder
-
Returns the trim boundary
License requirements: None.
- trimBoundingObjects() - Method in interface nxopen.features.TrimCurveBuilder
-
Returns the option whether bounding objects are to be trimmed
License requirements: None.
- TrimBoundsData() - Constructor for class nxopen.die.TrimTaskBuilder.TrimBoundsData
-
- trimClearanceMethod() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the trimming clearance plane method
License requirements: None.
- trimClearancePlane() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the trimming clearance plane,plane entity type covers Xform and Plane
License requirements: None.
- trimColor() - Method in interface nxopen.cam.Preferences
-
Returns the trim color
License requirements: None.
- trimConnectionMethod() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the trimming connection method
License requirements: None.
- trimControl() - Method in interface nxopen.cam.MillCutParameters
-
Returns the trim control method type
License requirements: None.
- TrimCornerBuilder - Interface in nxopen.features
-
Represents a builder for non-associative trim corner operation.
- trimCount - Variable in class nxopen.uf.UFModl.SweepTrimObject
-
- TrimCurve - Interface in nxopen.features
-
Represents a trim curve feature
To create or edit an instance of this class, use
TrimCurveBuilder
Created in NX5.0.0
- trimCurve1Continuity() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the trim curve1 continuity
License requirements: None.
- trimCurve1Type() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the trim curve1 type
License requirements: None.
- TrimCurve2 - Interface in nxopen.features
-
Represents a new trim curve feature feature
To create or edit an instance of this class, use
TrimCurve2Builder
Created in NX11.0.1
- TrimCurve2Builder - Interface in nxopen.features
-
- TrimCurve2Builder.CurveExtension - Class in nxopen.features
-
the Curve extension selection
- TrimCurve2Builder.Direction - Class in nxopen.features
-
the Direction type selection
- TrimCurve2Builder.KeepDiscard - Class in nxopen.features
-
the Keep or Discard selection
- TrimCurve2Builder.Operation - Class in nxopen.features
-
the Trim or Divide selection
- trimCurve2Continuity() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the trim curve2 continuity
License requirements: None.
- trimCurve2Type() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the trim curve2 type
License requirements: None.
- TrimCurveBoundingObjectBuilder - Interface in nxopen.geometricutilities
-
- TrimCurveBoundingObjectBuilder.Method - Class in nxopen.geometricutilities
-
the Object or Plane selection
- TrimCurveBoundingObjectBuilderList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- TrimCurveBuilder - Interface in nxopen.features
-
- TrimCurveBuilder.CurveEndOptions - Class in nxopen.features
-
Represents the trim curve end options
- TrimCurveBuilder.CurveExtensionTypes - Class in nxopen.features
-
Represents the trim curve extension types
- TrimCurveBuilder.CurveTrimRegionOptions - Class in nxopen.features
-
Represents the trim curve trim region options
- TrimCurveBuilder.FirstBoundingObjectEndOptions - Class in nxopen.features
-
Represents the trim curve first bounding object end options
- TrimCurveBuilder.FirstBoundingObjectOptions - Class in nxopen.features
-
Represents the trim curve first bounding object options
- TrimCurveBuilder.InteresectionDirectionOptions - Class in nxopen.features
-
Represents the trim curve interesection direction options
- TrimCurveBuilder.InteresectionMethods - Class in nxopen.features
-
Represents the trim curve interesection methods
- TrimCurveBuilder.SecondBoundingObjectEndOptions - Class in nxopen.features
-
Represents the trim curve second bounding object end options
- TrimCurveBuilder.SecondBoundingObjectOptions - Class in nxopen.features
-
Represents the trim curve second bounding object options
- trimCurveCreateType() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the trim curve creation type
License requirements: die_engineering ("DIE ENGINEERING")
.
- trimCurveFaceEdges(boolean) - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Trim curve status accroding to the trim option
License requirements: None.
- trimCurveOpt - Variable in class nxopen.uf.UFModl.StycornerData
-
- trimCurveRebuildData() - Method in interface nxopen.features.StyledCornerBuilder
-
Returns the trim curve rebuild data
License requirements: None.
- trimCurveType() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the trim curve type.
- trimDimensionLineStyle() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the trim dimension line style
License requirements: None.
- TrimDimensionLineStyle - Class in nxopen.annotations
-
Specifies the dimension trim dimension line style.
- trimDimLine() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the trim dimension line flag.
- trimDimLine - Variable in class nxopen.uf.UFDrf.DimensionPreferences
-
- trimDimLine - Variable in class nxopen.uf.UFDrf.DimensionPreferences1
-
- trimDirection() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the normal to the trim line
License requirements: None.
- trimDirection() - Method in interface nxopen.die.DieAssistantTrimProfile
-
Returns the trim profile trim direction
License requirements: None.
- trimDirection() - Method in interface nxopen.features.shipdesign.SplitProfilePlateBuilder
-
Returns the trim direction, which works together with Reverse Direction option, to determine which part of target body will be trimmed.
- trimDirection() - Method in interface nxopen.features.TrimBodyBuilder
-
Returns the trim direction of the trim body feature
License requirements: None.
- trimDirection() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the trim direction.
- trimDirection() - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
Returns the indication to reverse the trim direction.
- trimDirection() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the trim body side.
- trimEdgeOffset() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the trim edge offset distance.
- TRIMETRIC - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.ModelViewToUseValue
-
- TRIMETRIC - Static variable in class nxopen.View.Canned
-
- trimetricView() - Method in interface nxopen.drawings.ViewCreationWizardBuilder
-
Returns the trimetric view
License requirements: None.
- TrimExtend - Interface in nxopen.features
-
Represents a trim extend feature.
- trimExtendBuilder() - Method in interface nxopen.cam.DPMItpBuilder
-
Returns the trim and extend builder
License requirements: None.
- TrimExtendBuilder - Interface in nxopen.features
-
- TrimExtendBuilder.ArrowSideOptions - Class in nxopen.features
-
This enum represents the TrimExtend Arrow Side Options
- TrimExtendBuilder.CreationTypes - Class in nxopen.features
-
This enum represents the TrimExtend types
- TrimExtendBuilder.ExtensionMethods - Class in nxopen.features
-
This enum represents the TrimExtend Extension Methods
- trimExtendConstraintCurve(Section) - Method in interface nxopen.die.AddendumSectionBuilder
-
Trims or extends constraint curve.
- trimFeatureCollection() - Method in interface nxopen.features.FeatureCollection
-
Returns the TrimfeatureCollection instance belonging to this part .
- TrimFeatureCollection - Interface in nxopen.features
-
Manages design features.
- trimFlangeDieAssistant(Feature) - Method in interface nxopen.die.DieCollection
-
Creates the trim/flange die assistant builder.
- TrimFlangeDieAssistant - Interface in nxopen.die
-
- TrimFlangeDieAssistantBuilder - Interface in nxopen.die
-
- trimGeomColor - Variable in class nxopen.uf.UFCam.Preferences
-
- trimGeometry() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the trim geometry type
License requirements: None.
- trimInputCurves() - Method in interface nxopen.SketchChamferBuilder
-
Returns the toggle that specifies whether the two selected lines are to be trimmed
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.
- trimInputFacesToBlendFaces() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the option for Trim Input Faces to Blend Faces
License requirements: None.
- trimInputFacesToExtendedRail() - Method in interface nxopen.features.FlowBlendBuilder
-
Returns the patch trim option
License requirements: None.
- TRIMLINE - Static variable in class nxopen.bodydes.OnestepUnformBuilder.UnfoldMode
-
Onestep unfold mode is trimline
- trimLine() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the trim line
License requirements: None.
- TrimLineDevelopment - Interface in nxopen.features
-
Represents a trim line development feature
To create or edit an instance of this class, use
TrimLineDevelopmentBuilder
Created in NX6.0.0
- TrimLineDevelopmentBuilder - Interface in nxopen.die
-
- TrimLineDevelopmentBuilder.Convergency - Class in nxopen.die
-
The solver convergency level of onestep unform.
- TrimLineDevelopmentBuilder.MaterialTypeName - Class in nxopen.die
-
Indicates type of material
- TrimLineDevelopmentBuilder.MeshElement - Class in nxopen.die
-
The 2-D mesh element type of onestep unform.
- TrimLineDevelopmentBuilder.OutputMethodName - Class in nxopen.die
-
Indicates which trim curves to output
- TrimLineDevelopmentBuilder.SmoothingName - Class in nxopen.die
-
Indicates type of curve smoothing
- TrimLineDevelopmentBuilder.Surface - Class in nxopen.die
-
The surface types of onestep unform.
- trimlinePoint() - Method in interface nxopen.bodydes.OnestepUnformBuilder
-
Returns the point where the thickness direction is defined for trimline.
- trimLongInputFacesToExtendedRail() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the option for Trim Long Input Faces to Extended Rail
License requirements: None.
- TRIMMED - Static variable in class nxopen.geometricutilities.AlignmentMethodBuilder.AlignFillerSurfaceType
-
Trimmed developable surface.
- TRIMMED_CURVE - Static variable in class nxopen.Edge.EdgeType
-
Trimmed curve edge
- TRIMMED_PATCH - Static variable in class nxopen.features.NSidedSurfaceBuilder.SurfaceType
-
Trimmed Patch
- trimmedCurves() - Method in interface nxopen.SketchQuickTrimBuilder
-
Returns the trimmed curves
License requirements: None.
- trimmedSheet - Variable in class nxopen.uf.UFGdt.GeometricDefinition
-
- trimMethod() - Method in interface nxopen.features.AOCSBuilder
-
Returns the trim method option for the AOCS operation.
- trimMethod() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the trim
License requirements: None.
- trimMethod() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the trim method
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- trimMethod - Variable in class nxopen.uf.UFCurve.OcfData
-
- trimMidsrfFeature(Tag) - Method in interface nxopen.uf.UFModlFeatures
-
- TRIMMING - Static variable in class nxopen.tooling.ScrapDesignBuilder.AddonType
-
Creates trimming
- TRIMMING - Static variable in class nxopen.tooling.ScrapDesignBuilder.RemoveType
-
Captures trimming scraps
- trimmingColor() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the trimming color
License requirements: None.
- trimmingCurves() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the trimming curves
License requirements: None.
- trimmingDirection() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the trimming direction
License requirements: None.
- trimmingFaces() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder
-
Returns the trimming faces
License requirements: None.
- trimmingMarkColor() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the color of trimming mark.
- trimmingMarkColor() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the trimming mark color
License requirements: None.
- trimmingMarkLength() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the length of trimming mark.
- trimmingMarkLength() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the length of trimming mark.
- trimmingMarkLength() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- trimmingMarkLength() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the trimming mark length
License requirements: None.
- trimmingMarkStyle() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the type of trimming mark style like Corner or Triangle.
- trimmingMarkStyle() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the trimming mark style
License requirements: None.
- TrimmingMarkStyleType - Class in nxopen.diagramming
-
the trimming mark style type
- TrimmingMarkStyleType - Class in nxopen.drawings
-
the trimming mark style type
- trimmingMarkThickness() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the width of trimming mark.
- trimmingMarkThickness() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- trimmingMarkWidth() - Method in interface nxopen.diagramming.SheetBorderSettingsBuilder
-
Returns the width of trimming mark.
- trimmingMarkWidth() - Method in interface nxopen.drawings.SheetBorderSettingsBuilder
-
Returns the trimming mark width
License requirements: None.
- trimmingOption() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the trimming option
License requirements: None.
- trimmingOption() - Method in interface nxopen.features.FaceBlendBuilder
-
Returns the trimming option for face blend
License requirements: None.
- trimmingOption() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder
-
Returns the trimming option
License requirements: None.
- trimmingSteepAngle() - Method in interface nxopen.cam.ToolPathSplitParametersBuilder
-
Returns the trimming steep angle
License requirements: None.
- trimMoldComponents() - Method in interface nxopen.tooling.ToolingManager
-
Returns the TrimMoldComponentsCollection instance belonging to this part .
- TrimMoldComponentsBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to create Mold Wizard trim mold components.
- TrimMoldComponentsBuilder.TargetScope - Class in nxopen.tooling
-
the target bodies selection scope
- TrimMoldComponentsBuilder.TrimMethod - Class in nxopen.tooling
-
the processing type of Trim Mold Components.
- TrimMoldComponentsBuilder.TrimPartName - Class in nxopen.tooling
-
the trim part options where a part chosen to work around
- TrimMoldComponentsBuilder.TrimSurfaceName - Class in nxopen.tooling
-
trim surface types
- TrimMoldComponentsCollection - Interface in nxopen.tooling
-
Creates a TrimMoldComponentsCollection class
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- TrimMult() - Constructor for class nxopen.uf.UFCurve.TrimMult
-
- TrimMult(int, double[], int, double[]) - Constructor for class nxopen.uf.UFCurve.TrimMult
-
- trimNewDieFace() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the trim new die face, from NX10.0 new stamping output can import one new die face to die engineer process.
- trimNewDieFace() - Method in interface nxopen.die.TrimTaskBuilder
-
Returns the trim new die face, from NX10.0 new stamping output can import one new die face to die engineer process.
- trimNewDieFace() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the trim new die face, from NX10.0 new stamping output can import one new die face to die engineer process.
- trimNum() - Method in interface nxopen.tooling.ScrapDesignBuilder
-
Returns the trimming number
License requirements: None.
- trimObject() - Method in interface nxopen.geometricutilities.FacePlaneSelectionBuilder
-
Returns the trim object
License requirements: None.
- TrimObject() - Constructor for class nxopen.uf.UFModl.TrimObject
-
- TrimObject(Tag, int) - Constructor for class nxopen.uf.UFModl.TrimObject
-
- trimObjects - Variable in class nxopen.uf.UFModl.SweepTrimObject
-
- trimOffset() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the clearance value to apply at the start and the end of the cam definition to define the primary head solid.
- trimOffsetBuilder() - Method in interface nxopen.cam.FeatureGeomBuilder
-
Returns the trim offset (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- trimOption() - Method in interface nxopen.features.EmbossBodyBuilder
-
Returns the trim option
License requirements: None.
- trimOrExtendToBend() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the option to trim or extend faces to bend face.
- trimOutputCurveType() - Method in interface nxopen.die.OutputCurvesBuilder
-
Returns the trim curve output type
License requirements: die_engineering ("DIE ENGINEERING")
.
- trimPart() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the trim part in which trim surface features are cycled.
- trimPart() - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
Returns the trim part where trim surface features are found.
- trimPlane() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the trim plane,plane entity type covers Xform and Plane
License requirements: None.
- TrimPlane - Interface in nxopen.cam
-
Represents Trim Plane .
- TrimPlane.Content - Class in nxopen.cam
-
The content options .
- TrimPlane.LimitOptions - Class in nxopen.cam
-
The limit options .
- TrimPoint - Interface in nxopen.cam
-
Represents trim point .
- TrimPoint.AngleOptions - Class in nxopen.cam
-
The trim point angle options .
- TrimPoint.Options - Class in nxopen.cam
-
The trim point options .
- TrimPoint.RampAngleOptions - Class in nxopen.cam
-
The trim point ramp angle options .
- trimPoint1() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the trim point 1
License requirements: None.
- trimPoint1Builder() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the trim point 1 options
License requirements: cam_base ("CAM BASE")
.
- trimPoint2() - Method in interface nxopen.cam.RoughFinishTurningBuilder
-
Returns the trim point 2
License requirements: None.
- trimPoint2Builder() - Method in interface nxopen.cam.TurnFeatureGeomBuilder
-
Returns the trim point 2 mode options
License requirements: cam_base ("CAM BASE")
.
- trimProfile() - Method in interface nxopen.die.DieAssistantTrimProfile
-
Returns the trim profile
License requirements: None.
- trimProfile() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the trim profile
License requirements: die_engineering ("DIE ENGINEERING")
.
- trimProfileDirection() - Method in interface nxopen.die.DieAssistantTrimProfile
-
Returns the trim profile direction
License requirements: None.
- trimProfileSet() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
Returns the trim profile set
License requirements: None.
- trimPtr - Variable in class nxopen.uf.UFModl.AskExtrusionData
-
- trimPtr - Variable in class nxopen.uf.UFModl.AskRevolutionData
-
- trimRadius() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the radius that specifies the distance from the tire section to the spindle at which the tire section will be trimmed.
- TrimRegionBuilder - Interface in nxopen.tooling
-
Mold Wizard trim region management builder, trims a body to a boundary of edges, curves or bodies.
- TrimRegionBuilder.BoundaryOption - Class in nxopen.tooling
-
represents the boundary type option, body/curve type or traverse type.
- TrimRegionBuilder.ColorValueData - Class in nxopen.tooling
-
- TrimRegionBuilder.RegionOption - Class in nxopen.tooling
-
represents the option to keep or discard the selected region.
- TrimRegionCollection - Interface in nxopen.tooling
-
Represents a collection of Trim Region
To obtain an instance of this class, refer to
ToolingManager
Created in NX7.5.0
- trimRegions() - Method in interface nxopen.tooling.ToolingManager
-
Returns the TrimRegionCollection instance belonging to this part .
- trimSheet() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the sheet body selection for the trim sheet.
- TrimSheet - Interface in nxopen.features
-
Represents a trim sheet feature.
- trimSheet(Tag, int, UFModl.TrimObject[], double[], int, int, double[], double) - Method in interface nxopen.uf.UFModeling
-
- TrimSheetBuilder - Interface in nxopen.features
-
- TrimSheetBuilder.KeepDiscardOption - Class in nxopen.features
-
Represents the keep discard options for selected region
- TrimSheetData() - Constructor for class nxopen.uf.UFModeling.TrimSheetData
-
- trimSheetFace() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the face selections to define the trim sheet.
- trimSheetOffset() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the offset value to apply to the trim sheet to construct the tool solids.
- trimSheetType() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the indicator for how the trim sheet is specified.
- trimSide() - Method in interface nxopen.cam.ToolPathEditorBuilder
-
Returns the side to trim
License requirements: None.
- trimSide() - Method in interface nxopen.die.DieAssistantTrimProfile
-
Returns the trim profile reverse trim side indicator
License requirements: None.
- trimSolid() - Method in interface nxopen.tooling.ToolingManager
-
Returns the TrimSolidCollection instance belonging to this part .
- TrimSolidBuilder - Interface in nxopen.tooling
-
Mold Wizard trim solid management builder, trims bounding box body with region, subtract
bounding box with workpiece or keep region and box.
- TrimSolidBuilder.TrimSolidAction - Class in nxopen.tooling
-
represents the action to create trim solid.
- TrimSolidBuilder.Types - Class in nxopen.tooling
-
represents the option to select face or sheet body or manufacturing faces to trim the bounding box.
- TrimSolidCollection - Interface in nxopen.tooling
-
Represents a collection of Trim Solid
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- trimSteelParms() - Method in interface nxopen.die.TrimFlangeDieAssistantBuilder
-
TODO: fill in a description for this
License requirements: ug_die_design ("Die Design")
.
- trimStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the trim stock
License requirements: None.
- TRIMSURF_TOPO - Static variable in class nxopen.uf.UFBrep.TopoType
-
- trimSurface() - Method in interface nxopen.tooling.EjectorPostProcessingBuilder
-
Returns the trim surface used to trim an ejector pin.
- trimSurface() - Method in interface nxopen.tooling.TrimMoldComponentsBuilder
-
Returns the trim surface used to trim the target bodies.
- trimTask(Feature) - Method in interface nxopen.die.DieCollection
-
Creates/Edits the trim task feature builder.
- TrimTaskBuilder - Interface in nxopen.die
-
Represents a Trim Task feature builder.
- TrimTaskBuilder.CameraLayerAndXmlpData - Class in nxopen.die
-
- TrimTaskBuilder.CamTypes - Class in nxopen.die
-
Settings for the cam type of the trim task.
- TrimTaskBuilder.CheckAndMovePlanesData - Class in nxopen.die
-
- TrimTaskBuilder.MatchCutTypes - Class in nxopen.die
-
Settings for the match cut type of the trim task.
- TrimTaskBuilder.TrimBoundsData - Class in nxopen.die
-
- TRIMTO_ALL_INPUT_FACES - Static variable in class nxopen.features.AestheticFaceBlendBuilder.BlendFacesType
-
Trims all input faces.
- TRIMTO_LONG_INPUT_FACES - Static variable in class nxopen.features.AestheticFaceBlendBuilder.BlendFacesType
-
Trims long input faces.
- TRIMTO_SHORT_INPUT_FACES - Static variable in class nxopen.features.AestheticFaceBlendBuilder.BlendFacesType
-
Trims short input faces.
- TRIMTO_SIDE1WITH_NO_EXTENSION - Static variable in class nxopen.features.MidSurfaceByFacePairsBuilder.TrimmingOptionType
-
Trim to master
- trimToBoundary() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the trim-to-boundary option
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- trimToFaceEdgesOption() - Method in interface nxopen.features.AOCSBuilder
-
Returns the cross boundary option for the AOCS operation.
- trimToFaceEdgesOption() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the trim option for curve option.
- trimTolerance() - Method in interface nxopen.tooling.DieEngTrimTaskBuilder
-
Returns the trim task tolerance.
- trimToolPath(OperationBuilder) - Method in interface nxopen.cam.CAMSetup
-
Interactive Tool Path Trim
License requirements: cam_base ("CAM BASE")
.
- trimToParentDuct() - Method in interface nxopen.routing.WindCatcherBuilder
-
Returns the flag that indicates whether the Wind Catcher's duct should be trimmed back to the top of the parent duct.
- trimTrueBodyWithSewedSheet() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Trim true body with sewed sheet.
- trimType() - Method in interface nxopen.features.shipdesign.PlateBoundaryOptionBuilder
-
Returns the plate boundary trim types.
- trimType() - Method in interface nxopen.geometricutilities.Extend
-
- trimType() - Method in interface nxopen.SketchAssociativeTrimBuilder
-
Returns the trim region type - if the region needs to be kept/discarded
License requirements: None.
- trimWallAngleScale() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the trim wall angle scale
License requirements: die_engineering ("DIE ENGINEERING")
.
- trimWithGuideLines() - Method in interface nxopen.tooling.MWDesignPartingSurfaceBuilder
-
Returns the option to trim with guide lines.
- triple(double[], double[], double[]) - Method in interface nxopen.uf.UFVec3
-
- TRISTRIP - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.FacetType
-
The facet topology is a tristrip facet
- trns() - Method in interface nxopen.UFSession
-
- TROCHOIDAL - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Trochoidal
- trochoidalSettings() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Trochoidal Settings
License requirements: None.
- TrochoidalSettings - Interface in nxopen.cam
-
- TRUBULENT_STRUCTURES - Static variable in class nxopen.cae.Result.Quantity
-
- TRUE - Static variable in class nxopen.ame.OperatorRuleBuilder.NegationValue
-
- TRUE - Static variable in class nxopen.assemblies.ClearanceSet.ReanalyzeOutOfDateExcludedPairs
-
- TRUE - Static variable in class nxopen.assemblies.ComponentAssembly.CloseModified
-
Close all parts, modified and unmodified
- TRUE - Static variable in class nxopen.assemblies.PartitionSearchTerm.IncludeChildren
-
Include Partition children while finding results by this search term
- TRUE - Static variable in class nxopen.AttributePropertiesBaseBuilder.BooleanValueOptions
-
True
- TRUE - Static variable in class nxopen.AttributeTemplatesBuilder.DefaultBooleanOptions
-
True
- TRUE - Static variable in class nxopen.BasePart.CloseAfterSave
-
- TRUE - Static variable in class nxopen.BasePart.CloseWholeTree
-
- TRUE - Static variable in class nxopen.BasePart.SaveComponents
-
- TRUE - Static variable in class nxopen.cam.NCGroupCollection.UseDefaultName
-
use the default name
- TRUE - Static variable in class nxopen.cam.OperationCollection.UseDefaultName
-
use the default name
- TRUE - Static variable in class nxopen.mechatronics.ProxyOverrideObjectBuilder.AttrBoolValue
-
- TRUE - Static variable in class nxopen.options.LevelLockedByDefault
-
Locked
- TRUE - Static variable in class nxopen.preferences.RoutingPart.UsePreferredPort
-
- TRUE - Static variable in class nxopen.preferences.RoutingPath.AddPointsToSpline
-
Merge duplicate RCPs.
- TRUE - Static variable in class nxopen.preferences.RoutingPath.ConfirmBranchSel
-
Confirm branch selection.
- TRUE - Static variable in class nxopen.preferences.RoutingPath.ContinueUpdOnError
-
- TRUE - Static variable in class nxopen.preferences.RoutingPath.CreateSlopeConstraints
-
- TRUE - Static variable in class nxopen.preferences.RoutingPath.CreateSmartRcps
-
Create smart RCPs.
- TRUE - Static variable in class nxopen.preferences.RoutingPath.CreateTangency
-
Merge duplicate RCPs.
- TRUE - Static variable in class nxopen.preferences.RoutingPath.DisplayObject
-
- TRUE - Static variable in class nxopen.preferences.RoutingPath.MergeDupRcps
-
Merge duplicate RCPs.
- TRUE - Static variable in class nxopen.preferences.RoutingPath.OccChainable
-
- TRUE - Static variable in class nxopen.Sketch.AlternateSolutionOption
-
Use the alternate solution
- TRUE - Static variable in class nxopen.Sketch.CreateDimensionOption
-
Create a radius dimension
- TRUE - Static variable in class nxopen.Sketch.DeleteThirdCurveOption
-
Delete the 3rd curve
- TRUE - Static variable in class nxopen.Sketch.TrimInputOption
-
Trim the input curves
- TRUE - Static variable in class nxopen.Sketch.ViewReorient
-
Reorient view to sketch
- TRUE - Static variable in class nxopen.tooling.PocketBuilder.RsetType
-
true
- TRUE - Static variable in class nxopen.tooling.StandardPartBuilder.RefsetName
-
- TRUE_ANGLE - Static variable in class nxopen.drawings.AssociativeAngleBuilder.EvaluationPlaneType
-
- TRUE_ANGLE - Static variable in class nxopen.MeasureAngleBuilder.ProjectionType
-
- TRUE_BODY - Static variable in class nxopen.tooling.ValidCheckBuilder.CheckingType
-
True body will be used to do checking
- TRUE_DRAFT - Static variable in class nxopen.features.DraftBodyBuilder.Method
-
Indicates use of true draft algorithm to create draft.
- TRUE_DRAFT - Static variable in class nxopen.features.DraftBuilder.Method
-
Indicates use of true draft algorithm to create draft.
- TRUE_SIZE - Static variable in class nxopen.display.DecalBuilder.ImageSize
-
use true image size
- TRUE_SIZE - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeType
-
- TRUE_STRESS_LOG_PLASTIC_STRAIN - Static variable in class nxopen.MaterialUtilities.StressStrainData
-
True stress-log plastic strain
- TRUE_STRESS_LOG_STRAIN - Static variable in class nxopen.MaterialUtilities.StressStrainData
-
True stress-log strain
- trueHiddenLine() - Method in interface nxopen.drawings.ViewStyleThreadsBuilder
-
Returns the true hidden line toggle on the THREADS tab of the View Style Dialog
License requirements: None.
- trueLengthText() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the flag indicating true-length text for the dimension
License requirements: None.
- trueLengthText() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the true length dimension text
License requirements: None.
- trueLengthTextPosition() - Method in interface nxopen.annotations.DimensionPreferences
-
Returns the True Length Text Position
License requirements: None.
- trueLengthTextPosition() - Method in interface nxopen.annotations.DimensionStyleBuilder
-
Returns the true length text position
License requirements: None.
- TrueLengthTextPosition - Class in nxopen.annotations
-
Specifies the True Length Text position
- TrueShading - Interface in nxopen.display
-
Represents a True Shading object
TrueShading is not supported in KF.
- TrueShadingBuilder - Interface in nxopen.display
-
- TrueShadingBuilder.BgdImageType - Class in nxopen.display
-
Background image types
- TrueShadingBuilder.BgdType - Class in nxopen.display
-
Background colors and image types
- TrueShadingBuilder.EnvironmentMapType - Class in nxopen.display
-
Global environment reflection map types
- TrueShadingBuilder.MaterialType - Class in nxopen.display
-
Global material and per object overriding material types
- TrueShadingBuilder.SHEDLightCollectionType - Class in nxopen.display
-
Scene lighting collection types
- TrueShadingBuilder.SurfaceOrientType - Class in nxopen.display
-
Shadow plane projection orientation types
- TrueShadingCollection - Interface in nxopen.display
-
Represents a collection SHED objects
To obtain an instance of this class, refer to
BasePart
Created in NX6.0.0
- trueShapeData() - Method in interface nxopen.SaveOptions
-
Returns the option indicating whether to generate data for true shape
filtering (.ts files)
License requirements: None.
- trueShapeFiltering() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the true shape filtering option
License requirements: None.
- trueShapeRefinement() - Method in interface nxopen.assemblies.BoxSearchTermBuilder
-
Returns
the true-shape refinement.
- trueShapeRefinement() - Method in interface nxopen.assemblies.PlaneSearchTermBuilder
-
Returns
the true-shape refinement.
- trueShapeRefinement() - Method in interface nxopen.assemblies.ProximitySearchTermBuilder
-
Returns
the true-shape refinement.
- trueShapeRefinement() - Method in interface nxopen.assemblies.RunContentProximitySearchTermBuilder
-
Returns
the true-shape refinement.
- TrueStudio - Interface in nxopen.display
-
Represents a True Shading object
TrueStudio is not supported in KF.
- TrueStudioBuilder - Interface in nxopen.display
-
- TrueStudioBuilder.GlobalMaterial - Class in nxopen.display
-
Types of True Studio Global Material display.
- TrueStudioBuilder.RenderMethod - Class in nxopen.display
-
Types of True Studio Render Methods.
- TrueStudioCollection - Interface in nxopen.display
-
Represents a collection TrueStudio objects
To obtain an instance of this class, refer to
BasePart
Created in NX6.0.0
- trueStudioObjs() - Method in interface nxopen.BasePart
-
Returns the Display.TrueStudioCollection instance belonging to this part
Created in NX8.0.0
- trueSurfaceDisplay() - Method in interface nxopen.preferences.ViewVisualizationVisual
-
- TrueSurfaceDisplayPref() - Constructor for class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref
-
Deprecated.
- TrueSurfaceDisplayPref(ViewVisualizationVisual.HiddenEdgesType, boolean, boolean, int, ViewVisualizationVisual.SmoothEdgeFont, ViewVisualizationVisual.SmoothEdgeWidth, ViewVisualizationVisual.DisplayModeType) - Constructor for class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref
-
Deprecated.
Constructor for the TrueSurfaceDisplayPref object.
- TRUMPF_GEO - Static variable in class nxopen.features.sheetmetal.ExportFlatPatternBuilder.FileType
-
Trumpf Geo Export
- TRUMPF_GEO_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId
-
- TRUMPF_GEO_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId
-
- TRUNCATE - Static variable in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
- TRUNCATE - Static variable in class nxopen.diagramming.tables.OverflowBehavior
-
Truncate overflow behavior
- truncate(String, int, int) - Method in interface nxopen.uf.UFText
-
- truncated - Variable in class nxopen.uf.UFText.TruncateData
-
- TruncateData() - Constructor for class nxopen.uf.UFText.TruncateData
-
- TRUSHAPE_DATA - Static variable in class nxopen.pdm.FileManagement.FileType
-
- TSAI_WU - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum
-
- TSAI_WU - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum
-
Tsai-Wu
- TSAI_WU - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType
-
Tsai-Wu failure criteria
- tsInfoDefined - Variable in class nxopen.uf.UFDisp.AskTextureSpaceInfoData
-
- tsInfoPtr - Variable in class nxopen.uf.UFDisp.AskTextureSpaceInfoData
-
- TSLOT - Static variable in class nxopen.uf.UFModl.SlotType
-
- tsScale - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
-
- tsScale1 - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
-
- TTMOPR_SUBOP_TYPE_FOLLOW_CURVE - Static variable in class nxopen.uf.UFParam.TtmoprSubopType
-
- TTMOPR_SUBOP_TYPE_LINFEED - Static variable in class nxopen.uf.UFParam.TtmoprSubopType
-
- TTMOPR_SUBOP_TYPE_MCE - Static variable in class nxopen.uf.UFParam.TtmoprSubopType
-
- TTMOPR_SUBOP_TYPE_RAPID - Static variable in class nxopen.uf.UFParam.TtmoprSubopType
-
- TTMOPR_SUBOP_TYPE_SET_ENGAGE - Static variable in class nxopen.uf.UFParam.TtmoprSubopType
-
- TTMOPR_SUBOP_TYPE_SET_RETRACT - Static variable in class nxopen.uf.UFParam.TtmoprSubopType
-
- TToolBuilder - Interface in nxopen.cam
-
- TUBE - Static variable in class nxopen.cae.Post.StreamlineStyle
-
- TUBE - Static variable in class nxopen.cam.BoundaryTurnBlank.Type
-
- Tube - Interface in nxopen.features
-
Represents a tube feature
To create or edit an instance of this class, use
TubeBuilder
Created in NX5.0.0
- TUBE - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
Tube
- TUBE - Static variable in class nxopen.weld.WeldBeadBuilder.Types
-
tube shape
- TUBE_ADDITIVE - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Tube Additive
- TUBE_ADDITIVE_THINWALL - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Tube Additive Thinwall
- TUBE_FINISH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Tube Finish
- TUBE_ROUGH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes
-
Tube Rough
- TubeBuilder - Interface in nxopen.features
-
- TubeBuilder.Output - Class in nxopen.features
-
This enum represents the topology output option
- tubeDiameter() - Method in interface nxopen.weld.WeldBeadSizeBuilder
-
Returns the diameter size of the tube shape.
- tubeRadius1() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the first tube radius
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- tubeRadius2() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the second tube radius
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- TUBULAR - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Tubular
- TUBULAR - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
- TUBULAR - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Tubular
- TURBULENCE_DISSIPATION - Static variable in class nxopen.cae.Result.Quantity
-
- TURBULENCE_ENERGY - Static variable in class nxopen.cae.Result.Quantity
-
- TURBULENT_INTENSITY - Static variable in class nxopen.cae.Result.Quantity
-
- TURBULENT_SPECIFIC_DISSIPATION - Static variable in class nxopen.cae.Result.Quantity
-
- TURKISH - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the Turkish character set
- TURN - Static variable in class nxopen.cam.ConvertFromMCDBuilder.MachineTypes
-
- TURN - Static variable in class nxopen.cam.Tool.Types
-
Turning tool
- TURN - Static variable in class nxopen.sim.MachineToolConfiguration.TechnologyTypes
-
The lathe technology type
- turn() - Method in interface nxopen.UFSession
-
- TURN_BORING_BAR - Static variable in class nxopen.cam.Tool.Subtypes
-
Turning tool-Boring bar
- TURN_BUTTON - Static variable in class nxopen.cam.Tool.Subtypes
-
Turning tool-Button
- TURN_SLIP - Static variable in class nxopen.motion.TirePropertyTnoBuilder.SlipForcesType
-
- TURN_STANDARD - Static variable in class nxopen.cam.Tool.Subtypes
-
Turning tool-Standard
- TURN_WORKPIECE_DIRECTION_FROM_HEAD_STOCK - Static variable in class nxopen.uf.UFParam.TurnWorkpieceDirection
-
- TURN_WORKPIECE_DIRECTION_TOWARDS_HEAD_STOCK - Static variable in class nxopen.uf.UFParam.TurnWorkpieceDirection
-
- TURN_WORKPIECE_TYPE_CURVES - Static variable in class nxopen.uf.UFParam.TurnWorkpieceType
-
- TURN_WORKPIECE_TYPE_CYLINDER - Static variable in class nxopen.uf.UFParam.TurnWorkpieceType
-
- TURN_WORKPIECE_TYPE_TUBE - Static variable in class nxopen.uf.UFParam.TurnWorkpieceType
-
- TURN_WORKPIECE_TYPE_UNDEFINED - Static variable in class nxopen.uf.UFParam.TurnWorkpieceType
-
- TURN_WORKPIECE_TYPE_WORKSPACE - Static variable in class nxopen.uf.UFParam.TurnWorkpieceType
-
- TurnAvoidanceApproachBuilder - Interface in nxopen.cam
-
Represents an avoidance start of engage Builder .
- TurnAvoidanceApproachBuilder.ApproachPathModes - Class in nxopen.cam
-
The approach path mode options .
- TurnAvoidanceClearanceBuilder - Interface in nxopen.cam
-
Represents an avoidance start of engage Builder .
- TurnAvoidanceClearanceBuilder.AxialPlaneModes - Class in nxopen.cam
-
The axial plane mode options .
- TurnAvoidanceClearanceBuilder.RadialPlaneModes - Class in nxopen.cam
-
The radial plane mode options .
- TurnAvoidanceDepartureBuilder - Interface in nxopen.cam
-
Represents an avoidance start of engage Builder .
- TurnAvoidanceDepartureBuilder.DeparturePathModes - Class in nxopen.cam
-
The departure path mode options .
- TurnAvoidanceFromBuilder - Interface in nxopen.cam
-
Represents an avoidance from Builder .
- TurnAvoidanceFromBuilder.FromPointModes - Class in nxopen.cam
-
The from point mode options .
- TurnAvoidanceGeomBuilder - Interface in nxopen.cam
-
- TurnAvoidanceGohomeBuilder - Interface in nxopen.cam
-
Represents an avoidance return Builder .
- TurnAvoidanceGohomeBuilder.GohomePointModes - Class in nxopen.cam
-
The gohome point mode options .
- TurnAvoidanceGohomeBuilder.GohomePointMotionTypes - Class in nxopen.cam
-
The gohome point motion type options .
- TurnAvoidancePathPointsBuilder - Interface in nxopen.cam
-
Represents a turn avoidance path points builder .
- TurnAvoidancePathPointsBuilder.CsTypes - Class in nxopen.cam
-
the cs modes .
- TurnAvoidancePathPointsBuilder.CustomFeedrateUnitTypes - Class in nxopen.cam
-
the custom feed rate unit options .
- TurnAvoidancePathPointsBuilder.FeedrateModesTypes - Class in nxopen.cam
-
the feed rate type options .
- TurnAvoidancePathPointsBuilder.MotionTypes - Class in nxopen.cam
-
the motion to point type options .
- TurnAvoidancePathPointsBuilder.PointData - Class in nxopen.cam
-
- TurnAvoidancePathPointsBuilder.PointListData - Class in nxopen.cam
-
- TurnAvoidancePathPointsBuilder.PointStatus - Class in nxopen.cam
-
the point status options .
- TurnAvoidanceReturnBuilder - Interface in nxopen.cam
-
Represents an avoidance return Builder .
- TurnAvoidanceReturnBuilder.ReturnPointModes - Class in nxopen.cam
-
The return point mode options .
- TurnAvoidanceReturnBuilder.ReturnPointMotionTypes - Class in nxopen.cam
-
the return point motion type options .
- TurnAvoidanceStartBuilder - Interface in nxopen.cam
-
Represents an avoidance start Builder .
- TurnAvoidanceStartBuilder.StartPointModes - Class in nxopen.cam
-
the start point mode options .
- TurnAvoidanceStartBuilder.StartPointMotionTypes - Class in nxopen.cam
-
The start point motion type options .
- TurnAvoidanceStartOfEngageBuilder - Interface in nxopen.cam
-
Represents an avoidance start of engage Builder .
- TurnAvoidanceStartOfEngageBuilder.StartOfEngageMotionTypes - Class in nxopen.cam
-
The start of engage motion type options .
- turnBlankStock() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the blank stock
License requirements: None.
- TurnBoundaryGeomBuilder - Interface in nxopen.cam
-
- TurnConcaveCornerControl - Interface in nxopen.cam
-
Represents a concave corner ja .
- TurnConcaveCornerControl.RadiusOptions - Class in nxopen.cam
-
the Concave Corner Control radius options .
- TurnConcaveCornerControl.Types - Class in nxopen.cam
-
the Concave Corner Control types .
- TurnCornerControl - Interface in nxopen.cam
-
Represents a first plunge ja .
- TurnCornerControl.Types - Class in nxopen.cam
-
the Corner Control Types options .
- TurnCutParameters - Interface in nxopen.cam
-
- turnCutterClearance() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the cutter clearance angles
License requirements: None.
- TurnCutterClearance - Interface in nxopen.cam
-
- turnDirection() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the turn direction type of the Scan Helix
License requirements: None.
- turnDirection() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the turn direction type
License requirements: None.
- TurnDirection - Interface in nxopen.cam
-
Represents a direction .
- turnDirection() - Method in interface nxopen.features.HelixBuilder
-
Returns the turn direction
License requirements: None.
- TurnDirection.Types - Class in nxopen.cam
-
the direction options .
- TurnEngageRetractBuilder - Interface in nxopen.cam
-
Represents a first plunge Builder .
- TurnEngageRetractBuilder.AutoOptions - Class in nxopen.cam
-
The auto engage retract options .
- TurnEngageRetractBuilder.DirectEngageRetractModes - Class in nxopen.cam
-
the direct engage/retact mode options .
- TurnEngageRetractBuilder.ExtendMethods - Class in nxopen.cam
-
the extend method options .
- TurnEngageRetractBuilder.Types - Class in nxopen.cam
-
The engage retract type .
- turnEngRetMinDistBuilder() - Method in interface nxopen.cam.TurnMethodBuilder
-
Returns the minimum engage/retract distance builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- TurnFeatureGeomBuilder - Interface in nxopen.cam
-
- TurnFeatureGeomBuilder.CutRegionSelectionModes - Class in nxopen.cam
-
the cut region selection options
- TurnFeatureGeomBuilder.SurfaceSensitivityModes - Class in nxopen.cam
-
the surface sensitivity options .
- TurnFeatureGeomBuilder.ToleranceOffsetModes - Class in nxopen.cam
-
the tolerance_offset options
- TurnGeomBuilder - Interface in nxopen.cam
-
- TurnGrooveCornerControl - Interface in nxopen.cam
-
Represents a groove corner control ja .
- TurnGrooveCornerControl.CornerTypes - Class in nxopen.cam
-
the Groove Corner Control corner types .
- TurnGrooveCornerControl.CutSequenceTypes - Class in nxopen.cam
-
the Groove Corner Control cut sequence types .
- TurnGrooveCornerControl.ReliefPlungeTypes - Class in nxopen.cam
-
the Groove Corner Control relief plunge types .
- TURNING - Static variable in class nxopen.sim.KinematicChain.Types
-
Turning
- TurningOperation - Interface in nxopen.cam
-
Represents a Turning operation
To create or edit an instance of this class, use
TurningOperationBuilder
Created in NX7.5.0
- TurningOperationBuilder - Interface in nxopen.cam
-
Represents a Turning Operation Builder
This is an abstract class and cannot be instantiated.
- TurningOperationBuilder.MotionOutputOptions - Class in nxopen.cam
-
The motion output options .
- TurningOperationBuilder.ReorientToolHolderModeOptions - Class in nxopen.cam
-
available options for Reorient Tool Holder Mode
- TurningOperationBuilder.TrackingPointType - Class in nxopen.cam
-
available types for tracking point
- TurningToolBuilder - Interface in nxopen.cam
-
Represents a Turning tool builder
This is an abstract class, and cannot be instantiated.
- TurningToolBuilder.HolderShankTypes - Class in nxopen.cam
-
the available turn holder shank types
- TurningToolBuilder.InsertPositions - Class in nxopen.cam
-
the available insert positions
- turnInputMode() - Method in interface nxopen.cam.ToolAxisInterpolate
-
Returns the input mode type
License requirements: None.
- turnInterpolationMethod() - Method in interface nxopen.cam.ToolAxisInterpolate
-
Returns the angle mode type
License requirements: None.
- TurnMethodBuilder - Interface in nxopen.cam
-
- TurnMoveToPointBuilder - Interface in nxopen.cam
-
- TurnMoveToPointBuilder.DirectionTypes - Class in nxopen.cam
-
the move direction type
- turnOffAllPartingLines() - Method in interface nxopen.tooling.MWSearchRegionBuilder
-
Turn off all parting lines
License requirements: None.
- turnOffAllSheets() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Turn off all parting and patched sheets
License requirements: None.
- turnOffHighlighting() - Method in interface nxopen.PartCleanup
-
Returns the option that specifies whether to turn off highlighting for
all displayable objects in the displayed part.
- TurnOrientGeomBuilder - Interface in nxopen.cam
-
- TurnOrientGeomBuilder.LatheWorkPlaneTypes - Class in nxopen.cam
-
the lathe work plane types
- turnOrientWcs() - Method in interface nxopen.cam.TurnOrientGeomBuilder
-
Returns the turn orient WCS builder
License requirements: cam_base ("CAM BASE")
.
- TurnOrientWcs - Interface in nxopen.cam
-
Represents an Turn Orient Wcs Builder
This is an abstract class, and cannot be instantiated.
- TurnOrientWcs.XcMappingTypes - Class in nxopen.cam
-
the XC mapping types
- TurnOrientWcs.YcMappingTypes - Class in nxopen.cam
-
the YC mapping types
- turnOverlap() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the overlap
License requirements: None.
- TurnOverlap - Interface in nxopen.cam
-
- TurnOverlap.Types - Class in nxopen.cam
-
the overlap types .
- TurnPartProbing - Interface in nxopen.cam
-
Represents a Turn Part Probing operation
To create or edit an instance of this class, use
TurnPartProbingBuilder
Created in NX8.5.1
- TurnPartProbingBuilder - Interface in nxopen.cam
-
- turnPartStock() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the part stock
License requirements: None.
- TurnProbeClearanceBuilder - Interface in nxopen.cam
-
- TurnProbeClearanceBuilder.AxialPlaneModes - Class in nxopen.cam
-
The axial plane mode options .
- TurnProbeClearanceBuilder.RadialPlaneModes - Class in nxopen.cam
-
The radial plane mode options .
- TurnProbeInspectPointMoveBuilder - Interface in nxopen.cam
-
- TurnProbeInspectPointMoveBuilder.DirectionTypes - Class in nxopen.cam
-
the probing direction type
- turnProfileStock() - Method in interface nxopen.cam.TurnCutParameters
-
Returns the profile stock
License requirements: None.
- TurnRoughFinishLocalReturnBuilder - Interface in nxopen.cam
-
Represents an avoidance start Builder .
- TurnRoughFinishLocalReturnBuilder.AdjustmentModeTypes - Class in nxopen.cam
-
the adjustment mode options .
- TurnRoughFinishLocalReturnBuilder.DwellUnitTypes - Class in nxopen.cam
-
the Dwell Unit type .
- TurnRoughFinishLocalReturnBuilder.LimitTypes - Class in nxopen.cam
-
the local limit mode .
- TurnRoughFinishLocalReturnBuilder.ModeTypes - Class in nxopen.cam
-
The local return type options .
- TurnRoughFinishLocalReturnBuilder.ReturnMoveModeTypes - Class in nxopen.cam
-
the return move mode options .
- TurnRoughFinishTestCut - Interface in nxopen.cam
-
Represents a test cut builder .
- TurnRoughFinishTestCut.CutTypes - Class in nxopen.cam
-
the test cut type options
- TurnRoughFinishTestCut.DirectionTypes - Class in nxopen.cam
-
the test cut direction options
- TurnRoughFinishTestCut.FeedInTypes - Class in nxopen.cam
-
the test cut feed in options
- TurnRoughFinishTestCut.FeedOutTypes - Class in nxopen.cam
-
the test cut feed out options
- TurnRoughFinishTestCut.MeasuringPositionTypes - Class in nxopen.cam
-
the test cut measuring position options
- TurnRoughFinishTestCut.ReturnMoveTypes - Class in nxopen.cam
-
the test cut return move options
- TurnRoughFinishTestCut.SecondarySequenceTypes - Class in nxopen.cam
-
the secondary test cut sequence options
- TurnRoughFinishTestCut.SequenceTypes - Class in nxopen.cam
-
the test cut sequence options
- TurnRoughFinishTestCut.StockModeTypes - Class in nxopen.cam
-
the test cut stock mode options
- TurnRoughFinishTestCut.StopPositionTypes - Class in nxopen.cam
-
the test cut stop position options
- TurnRoughVariableIncrementBuilder - Interface in nxopen.cam
-
Represents a Variable Increment Builder .
- TURNS - Static variable in class nxopen.features.HelixBuilder.LengthMethods
-
Length by number of turns
- turns() - Method in interface nxopen.features.HelixBuilder
-
Returns the number of turns
License requirements: None.
- TurnStock - Interface in nxopen.cam
-
- TurnThreadEngageRetractBuilder - Interface in nxopen.cam
-
Represents a Thread Turning Engage or Retract Builder .
- TurnThreadEngageRetractBuilder.EngageRetractTypes - Class in nxopen.cam
-
The engage retract type .
- TurnThreadEngageRetractBuilder.MoveTypes - Class in nxopen.cam
-
The move type .
- TurnThreadFinishPassesBuilder - Interface in nxopen.cam
-
Represents a TurnThreadFinishPasses Builder .
- TurnToolBuilder - Interface in nxopen.cam
-
- TurnToolBuilder.HolderHands - Class in nxopen.cam
-
the available turn holder hand options
- TurnToolBuilder.HolderShankDefinitionModes - Class in nxopen.cam
-
the available turn holder shank definition modes
- TurnToolBuilder.HolderStyles - Class in nxopen.cam
-
the available turn holder style options
- TurnToolBuilder.InsertShapes - Class in nxopen.cam
-
the available insert shapes
- TurnToolBuilder.ReliefAngleTypes - Class in nxopen.cam
-
the available relief angle types
- TurnToolBuilder.SizeOptions - Class in nxopen.cam
-
the available size options
- TurnToolBuilder.ThicknessTypes - Class in nxopen.cam
-
the available thickness types
- TurnToolProbing - Interface in nxopen.cam
-
Represents a Turn tool operation
To create or edit an instance of this class, use
TurnToolProbingBuilder
Created in NX8.5.1
- TurnToolProbingBuilder - Interface in nxopen.cam
-
- TurnToolProbingBuilder.TrackingPointTypes - Class in nxopen.cam
-
available types for tracking point
- TurnTrackingPointData() - Constructor for class nxopen.uf.UFCutter.TurnTrackingPointData
-
- TurnTrackingPointData(double, double, double, double, int, int, int, int, String) - Constructor for class nxopen.uf.UFCutter.TurnTrackingPointData
-
- turnType() - Method in interface nxopen.cam.InspectionMethodBuilder
-
Returns the turn type of the Scan Helix
License requirements: None.
- turnType() - Method in interface nxopen.cam.InspectionScanHelixBuilder
-
Returns the turn type
License requirements: None.
- turret() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the turret
License requirements: None.
- TURRET - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Device classification
- turretPocketNumber() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the turret pocket number
License requirements: None.
- TWELFTH - Static variable in class nxopen.weld.WeldGroupIdColor
-
Twelvth Group Id Color Index
- TWELVE - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions
-
Display in 12 colors.
- TWENTY - Static variable in class nxopen.cae.xyplot.AxisDBScale
-
Db 20
- TWI - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.FatigueLifeCriterionEnum
-
- TWI - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.FatigueLifeCriterionEnum
-
TWI
- twiHighCycleCutoff() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the twi high cycle cutoff.
- twiHighCycleSlopeChange() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the twi high cycle slope change.
- twiLowCycleStressCutoff() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the twi low cycle stress cutoff.
- twiLowCycleStressExtension() - Method in interface nxopen.cae.DurabilityEventFatigueSettingsBuilder
-
Returns the twi low cycle stress extension.
- TWIN - Static variable in class nxopen.features.sheetmetal.JoggleBuilder.LimitTypes
-
- TWIST - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- twistAngle() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the twist angle
License requirements: None.
- twistAngleLaw() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the twist angle law
License requirements: None.
- twistAngleReverseDirection() - Method in interface nxopen.features.GlobalShapingBuilder
-
Returns the twist angle reverse direction
License requirements: None.
- twistOrigin() - Method in interface nxopen.cae.ElementExtrudeBuilder
-
Returns the twist origin
License requirements: None.
- twistPoint() - Method in interface nxopen.routing.RouteSweptTwistBuilder
-
Returns the twist point
License requirements: routing_harness ("Routing Harness")
.
- twistPointList() - Method in interface nxopen.routing.RouteSweptTwistBuilder
-
Returns the twist point list
License requirements: routing_harness ("Routing Harness")
.
- twistRateAcceptableColor() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the twist rate acceptable color.
- twistRateFailureColor() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the twist rate failure color.
- twistRateFailureLimit() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the twist rate failure limit.
- twistRateWarningColor() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the twist rate warning color.
- twistRateWarningLimit() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the twist rate warning limit.
- TWO - Static variable in class nxopen.ame.AmeTeeJunctionVariant
-
- TWO - Static variable in class nxopen.annotations.ArrowDisplay
-
Displays both the arrows
- TWO - Static variable in class nxopen.annotations.AutomaticCenterlineBuilder.CenterlineThickness
-
Width Two
- TWO - Static variable in class nxopen.annotations.CenterlineSettingsBuilder.CenterlineThickness
-
Width Two
- TWO - Static variable in class nxopen.annotations.ExtensionLineDisplay
-
Displays both the extension lines
- TWO - Static variable in class nxopen.annotations.FractionDenominatorFormat
-
- TWO - Static variable in class nxopen.annotations.IntersectionSymbolBuilder.Thickness
-
Width Two
- TWO - Static variable in class nxopen.annotations.LineWidth
-
Width Two
- TWO - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Thickness
-
Width Two
- TWO - Static variable in class nxopen.annotations.TargetPointBuilder.Thickness
-
Width Two
- TWO - Static variable in class nxopen.assemblies.ClearanceAnalysisBuilder.NumberOfCollections
-
- TWO - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.BuilderVersion
-
product interface builder supports composite curve, composite face and body collector options
- TWO - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.LocalSubdivisions
-
Two levels of subdivision
- TWO - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
-
- TWO - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
-
- TWO - Static variable in class nxopen.cae.FluidDomainBuilder.SubdivisionType
-
- TWO - Static variable in class nxopen.cae.ModelDisplayBuilder.FreeEdgeWidth
-
- TWO - Static variable in class nxopen.cae.ModelDisplayBuilder.RotationAxisWidth
-
- TWO - Static variable in class nxopen.cae.ModelDisplayBuilder.StitchedEdgeWidth
-
- TWO - Static variable in class nxopen.die.SpringbackCompensationBuilder.DegreeType
-
Degree is 2
- TWO - Static variable in class nxopen.display.GridBuilder.LineWeightType
-
- TWO - Static variable in class nxopen.DisplayableObject.ObjectWidth
-
- TWO - Static variable in class nxopen.DisplayManager.FacetCacheMemoryLevelType
-
- TWO - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Width
-
Two
- TWO - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.WidthType
-
Deprecated.
Width Two
- TWO - Static variable in class nxopen.features.BridgeCurveBuilder.SelectedObject
-
Deprecated.
input object 2 selected
- TWO - Static variable in class nxopen.features.shipdesign.SectionDrawingBuilder.ViewsPerSheetOptions
-
- TWO - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Width
-
- TWO - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LineWidthEnum
-
- TWO - Static variable in class nxopen.geometricanalysis.FaceAnalysisDisplayBuilder.ColorsOptions
-
Display in 2 colors.
- TWO - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions
-
2 reflection line.
- TWO - Static variable in class nxopen.motion.GeneralCouplerBuilder.AttachmentType
-
two-joint coupler type
- TWO - Static variable in class nxopen.PlaneTypes.AlternateType
-
Second alternate solution
- TWO - Static variable in class nxopen.preferences.ViewVisualizationVisual.SmoothEdgeWidth
-
- TWO - Static variable in class nxopen.preferences.Width
-
Width Two
- TWO - Static variable in class nxopen.tooling.BendOperationBuilder.Prebend
-
two prebends
- TWO - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption
-
the snap size is 2
- TWO - Static variable in class nxopen.tooling.DieCavityAndSlugHoleBuilder.DieInsertStackType
-
- TWO - Static variable in class nxopen.tooling.DirectUnfoldBuilder.Bend
-
two bends
- TWO - Static variable in class nxopen.tooling.LayoutBuilder.BalNumber
-
Two balance cavities
- TWO - Static variable in class nxopen.tooling.LayoutManagementBuilder.StationItems
-
Define station number -- 02
- TWO - Static variable in class nxopen.tooling.MotionSimulationBuilder.MoldbaseStyleType
-
Specifies two-plate style moldbase
- TWO - Static variable in class nxopen.tooling.PrebendBuilder.NumberBendsOption
-
two prebends
- TWO - Static variable in class nxopen.tooling.ScrapDesignBuilder.TrimNumType
-
Specifies two steps of trimming
- TWO - Static variable in class nxopen.tooling.StripLayoutBuilder.FromStationType
-
the beginning layout station is 2
- TWO - Static variable in class nxopen.tooling.StripLayoutBuilder.ToStationType
-
the end layout station is 2
- TWO - Static variable in class nxopen.tooling.StripLayoutStationInformationBuilder.StationItem
-
Define station number -- 02
- TWO - Static variable in class nxopen.ViewDependentDisplayManager.Width
-
- TWO - Static variable in class nxopen.weld.JointmarkBuilder.ConnectedPanelTypes
-
- TWO_CIRCLES - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Two Circles
- TWO_COAXIAL_ARCS - Static variable in class nxopen.features.ConeBuilder.Types
-
Represents type of cone created by providing Two Coaxial Arcs
- TWO_CONSTRAINT_CURVES - Static variable in class nxopen.features.FaceBlendBuilder.WidthMethod
-
Two Constraint Curves
- TWO_D - Static variable in class nxopen.cam.ToolPathTiltTilting.ToolAxisTiltingDistTypes
-
Tool tilting distance type 2d
- TWO_D - Static variable in class nxopen.DxfdwgCreator.ExportAsOption
-
export as 2d data
- TWO_DANNOT - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ToleranceSource
-
2D Annotation
- TWO_DIMENSION - Static variable in class nxopen.cae.optimization.Category
-
2D constraints
- TWO_DIMENSION - Static variable in class nxopen.cam.CutParametersIpwTypes
-
2d type
- TWO_DIMENSION_ELEMENT - Static variable in class nxopen.cae.PolygonFaceOnMeshBuilder.PolygonFaceOnMeshType
-
2D Element
- TWO_DIMENSIONAL - Static variable in class nxopen.cae.Result.GroupContainer
-
- TWO_DIMENSIONAL - Static variable in class nxopen.cam.CamPathContactType
-
- TWO_DRIVERS_ONE_FIXED - Static variable in class nxopen.features.vehicledesign.TireEnvelopeBuilder.DriverGraphOption
-
Use a fixed definition for two drivers.
- TWO_FIFTY_SIX - Static variable in class nxopen.display.DecalBuilder.ImageSize
-
resize iamge to 256 x 256
- TWO_FIVE_SIX - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.NumberOfLinesOptions
-
256 reflection line.
- TWO_GUIDES - Static variable in class nxopen.features.StyledSweepBuilder.Types
-
2 Guides
- TWO_HUNDRED_AND_SEVENTY - Static variable in class nxopen.pid.RotateAngleOption
-
270 degree.
- TWO_LIMIT - Static variable in class nxopen.features.shipdesign.BracketBuilder.LimitTypes
-
The bracket has two limit objects
- TWO_LINES - Static variable in class nxopen.PlaneTypes.MethodType
-
Two line method
- TWO_LINES_ALIGNED - Static variable in class nxopen.annotations.FitAssemblyDisplayStyle
-
Deprecated.
Display hole and shaft with dimension text aligned
- TWO_LINES_CENTERED - Static variable in class nxopen.annotations.FitAssemblyDisplayStyle
-
Deprecated.
Display hole and shaft with dimension text centered
- TWO_LINK - Static variable in class nxopen.motion.LinkCouplerBuilder.TypeChoices
-
2-Link
- TWO_OBJECT_ANGLE - Static variable in class nxopen.GenericMeasure.Type
-
- TWO_OBJECTS - Static variable in class nxopen.MeasureAngleBuilder.AngleType
-
- TWO_OFFSETS - Static variable in class nxopen.features.ChamferBuilder.ChamferOption
-
Two offset distances
- TWO_OFOUR_EIGHT - Static variable in class nxopen.display.DecalBuilder.ImageSize
-
resize image to 2048x2048
- TWO_PAIR - Static variable in class nxopen.tooling.BlankNestingBuilder.LayoutTypeSpecification
-
Two pair without bounding box.
- TWO_PARALLEL_PLANES - Static variable in class nxopen.display.DynamicSectionTypes.Type
-
Two parallel plane section
- TWO_PLANESAND_LINES - Static variable in class nxopen.features.shipdesign.PillarBuilder.CreationMethod
-
- TWO_PLANESAND_LINES - Static variable in class nxopen.features.shipdesign.SteelSupportBuilder.CreationMethod
-
- TWO_POINT - Static variable in class nxopen.cam.InspectionMethodBuilder.LimitsOfSizeTypes
-
Two Point
- TWO_POINT - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Angle
-
use two point to sepcify a angle
- TWO_POINT - Static variable in class nxopen.cam.InspectionOperationTransformBuilder.Line
-
specify a line by two point
- TWO_POINT - Static variable in class nxopen.cam.OperationTransformBuilder.Angle
-
use two point to sepcify a angle
- TWO_POINT - Static variable in class nxopen.cam.OperationTransformBuilder.Line
-
specify a line by two point
- TWO_POINT_RADIUS - Static variable in class nxopen.features.SectionSurfaceBuilder.Types
-
Deprecated.
two point radius
- TWO_POINT_RADIUS - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Two Point Radius mode
- TWO_POINT_SLOPE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CircularType
-
Two Point Slope mode
- TWO_POINT_TANGENT - Static variable in class nxopen.cam.TurnEngageRetractBuilder.Types
-
Two Point Tangent
- TWO_POINTS - Static variable in class nxopen.cae.AttachElementsBuilder.SplitLineOption
-
split by two points
- TWO_POINTS - Static variable in class nxopen.features.DatumAxisBuilder.Types
-
Datum axis thru two point
- TWO_POINTS - Static variable in class nxopen.formboard.OrientBranchBuilder.BranchAngleMethod
-
method to rotate branch by and angle between two points
- TWO_POINTS - Static variable in class nxopen.PlaneTypes.MethodType
-
Two Points method
- TWO_POINTS - Static variable in class nxopen.uf.UFDrf.AssocLineType
-
- TWO_POINTS_ANCHOR_RHO - Static variable in class nxopen.features.GeneralConicBuilder.Types
-
Two points, no slopes, anchor, rho value
- TWO_POINTS_AND_HEIGHT - Static variable in class nxopen.features.BlockFeatureBuilder.Types
-
Represents the block created by providing Two Points and Height
- TWO_POINTS_TWO_SLOPES_RHO - Static variable in class nxopen.features.GeneralConicBuilder.Types
-
Two points, two slopes, no anchor, rho value
- TWO_SECTION - Static variable in class nxopen.features.EmbossSidewall.SidewallMethod
-
(Not supported in NX4.)
- TWO_SIDED - Static variable in class nxopen.features.shipdesign.PillarBuilder.CapOptions
-
- TWO_SIDED - Static variable in class nxopen.features.shipdesign.PillarBuilder.EndCutTypes
-
Each end has different end cuts
- TWO_SIDED - Static variable in class nxopen.features.shipdesign.PlateStockBuilder.ThickenOptions
-
The opposite thickness is applied to the back side of the offset mold face, thickness minus the opposite thickness is applied to the front side of the offset mold face.
- TWO_SIDED - Static variable in class nxopen.features.shipdesign.ProfileBuilder.EndCutOption
-
- TWO_SIDED - Static variable in class nxopen.features.shipdesign.SteelSupportBuilder.CapOptions
-
- TWO_SIDED - Static variable in class nxopen.features.shipdesign.StiffenerBuilder.EndCutTypes
-
Each end has different end cuts
- TWO_SIDED - Static variable in class nxopen.weld.WeldBeadSizeBuilder.TriangleTypes
-
Basically an isosceles triangle
- TWO_SIDED_HOLES - Static variable in class nxopen.annotations.HoleTableSettingsHoleFiltersBuilder.ScopeType
-
Two-sided Holes
- TWO_SLOPES - Static variable in class nxopen.features.SectionSurfaceBuilderEx.CubicType
-
Two Slopes mode
- TWO_THIRD_SIZE_FRACTION - Static variable in class nxopen.annotations.DimensionTextFormat
-
Specfies 2/3 size fraction format
- TWO_THIRD_SIZE_FRACTION - Static variable in class nxopen.uf.UFDrf.FractionType
-
- TWO_UP - Static variable in class nxopen.tooling.BlankNestingBuilder.LayoutTypeSpecification
-
Two up without bounding box.
- TWO_WAY_VECTOR - Static variable in class nxopen.cam.CutAngle.Types
-
Two Way Vector
- twoDimensionFaceSetsData() - Method in interface nxopen.features.DraftBuilder
-
Returns the list of draft faces SC Collectors and corresponding draft angles above and below the parting reference.
- twoDOrientation() - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
Returns the view orientation
License requirements: None.
- twodOrientation() - Method in interface nxopen.drawings.DrawingViewBuilder
-
Returns the view orientation in 2D
License requirements: None.
- twoElementThroughThicknessToggle - Variable in class nxopen.uf.UFSf.UgsTetMeshParms
-
- TwoExpressionsCollectorSet - Interface in nxopen.geometricutilities
-
- TwoExpressionsCollectorSetList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- TwoExpressionsSectionSet - Interface in nxopen.geometricutilities
-
- TwoExpressionsSectionSetList - Interface in nxopen.geometricutilities
-
Represents a list of objects.
- twoLineToleranceTextSize() - Method in interface nxopen.annotations.LetteringStyleBuilder
-
Returns the two-line tolerance text character size
License requirements: None.
- TWOPI - Static variable in class nxopen.uf.UFConstants
-
- twoSidedLight() - Method in interface nxopen.drawings.ShadingViewStyle
-
Returns the two sided light toggle data.
- twoSidedLight() - Method in interface nxopen.drawings.ViewStyleShadingBuilder
-
Returns the two sided light toggle on the SHADING tab of the View Style Dialog
License requirements: None.
- twoSidedLight() - Method in interface nxopen.preferences.ShadingViewPreferences
-
Returns the two sided light toggle data.
- twoSidedLight() - Method in interface nxopen.preferences.ViewVisualizationVisual
-
Returns the two sided light flag.
- twoSidedLight - Variable in class nxopen.uf.UFView.Lighting
-
- TX - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- tx() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the DOF setting in the X Translation direction
License requirements: None.
- TX_INTP_CUBIC_SPLINE_METHOD - Static variable in class nxopen.uf.UFScop.TxIntpMethod
-
- TX_INTP_DATYPE_ANGLE_DS - Static variable in class nxopen.uf.UFScop.TxIntpDataType
-
- TX_INTP_DATYPE_ANGLE_PS - Static variable in class nxopen.uf.UFScop.TxIntpDataType
-
- TX_INTP_DATYPE_VECTOR - Static variable in class nxopen.uf.UFScop.TxIntpDataType
-
- TX_INTP_LINEAR_METHOD - Static variable in class nxopen.uf.UFScop.TxIntpMethod
-
- TX_INTP_SMOOTH_METHOD - Static variable in class nxopen.uf.UFScop.TxIntpMethod
-
- txLower() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the translation in X DOF lower limit
License requirements: None.
- txUpper() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the translation in X DOF upper limit
License requirements: None.
- ty() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the DOF setting in the Y Translation direction
License requirements: None.
- tyLower() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the translation in Y DOF lower limit
License requirements: None.
- type() - Method in interface nxopen.ame.EditClauseBuilder
-
Returns the type of object to be used for edit clause
EditClauseBuilder.type()
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
Created in NX11.0.0
- TYPE - Static variable in class nxopen.ame.EngineeringObjectAspectDetailBuilder.Columns
-
- type() - Method in interface nxopen.ame.FragmentBuilder
-
Returns the fragment type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- type() - Method in interface nxopen.ame.PageBuilder
-
Returns the Page type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- type() - Method in interface nxopen.ame.SymbolAuthoringBuilder
-
Returns the symbol type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- type() - Method in interface nxopen.annotations.ArcComponent
-
Returns the arc type.
- type() - Method in interface nxopen.annotations.ArrowComponent
-
Returns the arrow type.
- type() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.annotations.Centerline2dBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.annotations.CircleCenterlineBuilder
-
Returns the method which returns type of centerline
License requirements: None.
- type() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.annotations.IdSymbolBuilder
-
Returns the symbol type
License requirements: None.
- type() - Method in interface nxopen.annotations.LineComponent
-
Returns the line type.
- type() - Method in interface nxopen.annotations.RegionBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.annotations.SymmetricalCenterlineBuilder
-
Returns the type of Symmetrical Centerline
License requirements: None.
- type() - Method in interface nxopen.annotations.TextComponent
-
Returns the text type.
- type - Variable in class nxopen.assemblies.ClearanceSet.InterferenceData
-
the interference type
- type() - Method in interface nxopen.Axis
-
Returns the associativity type for the axis
License requirements: None.
- type() - Method in interface nxopen.blockstyler.UIBlock
-
Returns the type of block
License requirements: None.
- type() - Method in interface nxopen.cae.BaseIteration
-
Returns the type of the iteration
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- type() - Method in interface nxopen.cae.CAEConnectionBuilder
-
Returns the connection type
License requirements: None.
- type() - Method in interface nxopen.cae.connections.Element
-
Returns the type of the element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- type() - Method in interface nxopen.cae.DurSpecialistLocalDefinitionByGroupBuilder
-
Returns the kind of local definition to be created
License requirements: None.
- type() - Method in interface nxopen.cae.EdgeSticherBuilder
-
Returns the type : (Obsolete from NX07.5 onwards)
License requirements: None.
- type() - Method in interface nxopen.cae.ElementConnectivityBuilder
-
Returns a type which indicates whether connectivity is to be modfied for selected element or all attached elements.
- type() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns the split type
License requirements: nx_masterfem ("Finite Element Modeling")
.
- type() - Method in interface nxopen.cae.MMCCreateBuilder
-
Returns the mmc creation type
License requirements: None.
- type() - Method in interface nxopen.cae.NodesBetweenNodesBuilder
-
Returns the node creation type
License requirements: None.
- type() - Method in interface nxopen.cae.PolygonFaceOnMeshBuilder
-
Returns the selection method for different ways of selection
License requirements: None.
- type() - Method in interface nxopen.cae.PostMesh
-
- type - Variable in class nxopen.cae.QueryCurvePost.Entity
-
- type - Variable in class nxopen.cae.Result.DeformationParameters
-
Deprecated.
- type - Variable in class nxopen.cae.Result.ResultCoordinateSystemDefinitionData
-
- type - Variable in class nxopen.cae.Result.ResultParameters
-
Deprecated.
- Type() - Constructor for class nxopen.cae.Result.Type
-
- Type(Result.Quantity, Result.Location, Result.Section) - Constructor for class nxopen.cae.Result.Type
-
Constructor for the Type object.
- type - Variable in class nxopen.cae.Result.VelocityParameters
-
- type() - Method in interface nxopen.cae.SweepBetweenMeshBuilder
-
- Type - Class in nxopen.cae
-
Specify the radius point type
- type() - Method in interface nxopen.cam.BladeFinishGeom
-
Returns the Geometry to Finish
License requirements: None.
- type() - Method in interface nxopen.cam.BladeStartPoint
-
Returns the Type
License requirements: None.
- type() - Method in interface nxopen.cam.BoundaryTurnMemberCorner
-
Returns the corner type
License requirements: None.
- type() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishCorner
-
Returns the fine_finish_corner type
License requirements: None.
- type() - Method in interface nxopen.cam.BoundaryTurnMemberFineFinishOffset
-
Returns the fine finish offset type
License requirements: None.
- type() - Method in interface nxopen.cam.CAMAttribute
-
Returns the feature attribute type
License requirements: None.
- type() - Method in interface nxopen.cam.CAMFeature
-
Returns the type name of the CAMFeature
License requirements: None.
- type() - Method in interface nxopen.cam.ChipControl
-
Returns the chip control type
License requirements: None.
- type() - Method in interface nxopen.cam.CutAngle
-
Returns the cut angle type
License requirements: None.
- type() - Method in interface nxopen.cam.CutBand
-
Returns the Cut Band Type
License requirements: None.
- type() - Method in interface nxopen.cam.Cutcom
-
Returns the cutter compensation type
License requirements: None.
- type() - Method in interface nxopen.cam.CutDirection
-
Returns the cut direction type
License requirements: None.
- type() - Method in interface nxopen.cam.CutDwell
-
Returns the cut dwell type
License requirements: None.
- type() - Method in interface nxopen.cam.CutStrategy
-
Returns the cut strategy
License requirements: None.
- type() - Method in interface nxopen.cam.DimensionRule
-
Returns the dimension rule type
License requirements: None.
- type() - Method in interface nxopen.cam.FacesSequence
-
Returns the faces sequence
License requirements: None.
- type() - Method in interface nxopen.cam.FeatureGeometryGroup
-
Returns the feature type of the feature group
License requirements: None.
- type() - Method in interface nxopen.cam.FeatureProcessBuilder
-
Returns the type of feature process creation
License requirements: ug_holemaking ("UG Holemaking")
.
- type() - Method in interface nxopen.cam.FinishDwell
-
Returns the dwell after finish/profile cut mode
License requirements: cam_base ("CAM BASE")
.
- type - Variable in class nxopen.cam.HoleBossGeom.FormData
-
the Form Standard type
- type() - Method in interface nxopen.cam.LevelToLevel
-
Returns the level to level type
License requirements: None.
- type() - Method in interface nxopen.cam.MaxCutTraverse
-
Returns the max cut traverse type
License requirements: None.
- type() - Method in interface nxopen.cam.NcmTransfer
-
Returns the transfer between levels type
License requirements: None.
- type() - Method in interface nxopen.cam.ProfileStrategy
-
Returns the profile strategy
License requirements: None.
- type() - Method in interface nxopen.cam.RampingMode
-
Returns the ramping mode
License requirements: None.
- type() - Method in interface nxopen.cam.ReliefPlunge
-
Returns the relief plunge type
License requirements: None.
- type() - Method in interface nxopen.cam.Sequence
-
Returns the Sequencing Type
License requirements: None.
- type() - Method in interface nxopen.cam.SplitSubopCommand
-
Returns the split type
License requirements: None.
- type() - Method in interface nxopen.cam.SpringPasses
-
Returns the type of spring passes
License requirements: None.
- type() - Method in interface nxopen.cam.SteepContainment
-
Returns the steep containment type
License requirements: None.
- type() - Method in interface nxopen.cam.StopPosition
-
Returns the stop at mode
License requirements: None.
- type - Variable in class nxopen.cam.Tool.TypeAndSubtypeData
-
tool type
- type() - Method in interface nxopen.cam.ToolAxisTilt
-
Returns the type of tool axis tilting
License requirements: None.
- type() - Method in interface nxopen.cam.TurnConcaveCornerControl
-
Returns the Concave Corner Control type
License requirements: None.
- type() - Method in interface nxopen.cam.TurnCornerControl
-
Returns the Corner Control Types
License requirements: None.
- type() - Method in interface nxopen.cam.TurnDirection
-
Returns the direction
License requirements: None.
- type() - Method in interface nxopen.cam.TurnOverlap
-
Returns the overlap type
License requirements: None.
- type() - Method in interface nxopen.die.ClampingSlotBuilder
-
Returns the clamping slot type to build
License requirements: None.
- type() - Method in interface nxopen.die.ClearanceBuilder
-
- type() - Method in interface nxopen.die.CompensateRoughDataBuilder
-
Returns the type of input data being supplied.
- type() - Method in interface nxopen.die.FillAreaBuilder
-
Returns the indicator for the type of fill area to build.
- type() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the indicator specifying the type of input data that defines how to build the notch.
- type() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the indicator defining how the handling core is located in space.
- type() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the post type
License requirements: None.
- type() - Method in interface nxopen.die.KeywayBuilder
-
Returns the type of the keyway runoff
License requirements: None.
- type() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the value defining the type of build to perform for this tool.
- type() - Method in interface nxopen.die.QuickBinderBuilder
-
- type() - Method in interface nxopen.die.QuickBinderWrapBuilder
-
Returns the method
License requirements: None.
- type() - Method in interface nxopen.die.ThroatParentBuilder
-
Returns the type of throat sections.
- type() - Method in interface nxopen.display.CameraBuilder
-
Returns the camera type
License requirements: None.
- type() - Method in interface nxopen.display.DynamicSectionBuilder
-
Returns the section type
License requirements: None.
- type() - Method in interface nxopen.drawings.DetailViewBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.drawings.SectionLineBuilder
-
- type() - Method in interface nxopen.drawings.SectionLineSegmentBuilder
-
Returns the section line segment type
License requirements: None.
- type() - Method in interface nxopen.drawings.ViewCopyTo3dBuilder
-
Returns the type of copy
License requirements: None.
- type() - Method in interface nxopen.drawings.ViewProjectionBuilder
-
Returns the type of the view projection
License requirements: None.
- type() - Method in interface nxopen.drawings.ViewStyleFPCalloutsBuilder
-
Returns the type of Flat Pattern Callout
License requirements: None.
- type() - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
-
Returns the type of Flat Pattern Curve
License requirements: None.
- type() - Method in interface nxopen.Expression
-
Returns the type of the expression.
- type() - Method in interface nxopen.facet.CreateTransitionBuilder
-
Returns the type.
- type() - Method in interface nxopen.facet.DivideFacetFaceBuilder
-
Returns the type of enum which decides method for dividing facet faces
License requirements: None.
- type() - Method in interface nxopen.facet.ExtrudeFacetBodyBuilder
-
Returns the limit type
License requirements: None.
- type() - Method in interface nxopen.facet.FillHoleBuilder
-
Returns the hole filling type.
- type() - Method in interface nxopen.facet.SnipFacetBodyBuilder
-
Returns the snipping method accessor
License requirements: None.
- type() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the type option
License requirements: None.
- type() - Method in interface nxopen.features.BlockFeatureBuilder
-
- type() - Method in interface nxopen.features.ConeBuilder
-
- type() - Method in interface nxopen.features.CylinderBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.DatumAxisBuilder
-
Returns the Datum Axis type
License requirements: None.
- type - Variable in class nxopen.features.DeformDefinitionBuilder.JaDeformDefinitionExpData
-
- type() - Method in interface nxopen.features.DeleteFaceBuilder
-
Returns the delete face type, don't use it until nx502
License requirements: None.
- type() - Method in interface nxopen.features.DivideCurveBuilder
-
Returns the divide type
License requirements: None.
- type() - Method in interface nxopen.features.DraftBodyBuilder
-
Returns the draft body type
License requirements: None.
- type() - Method in interface nxopen.features.ExtensionBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.ExtractFaceBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.FitCurveBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.FitSurfaceBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.FlatteningAndFormingBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.FlatteningAndFormingBuilderEx
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.GeneralConicBuilder
-
Returns the conic creation type.
- type() - Method in interface nxopen.features.GeomcopyBuilder
-
Returns the transformation type of instancing, such as Between Locations, or Mirror.
- type() - Method in interface nxopen.features.GuidedExtensionBuilderEx
-
Returns the option type to create guided extension surface
License requirements: solid_modeling ("SOLIDS MODELING") OR nx_freeform_2 ("advanced freeform modeling") OR ug_mold_design ("UG MOLD") OR die_engineering ("DIE ENGINEERING") OR prog_die_wizard ("UG/Progressive Die Wizard")
.
- type() - Method in interface nxopen.features.HelixBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.HolePackageBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.LawExtensionBuilder
-
Returns the type
License requirements: solid_modeling ("SOLIDS MODELING") OR free_form_modeling ("FREE-FORM MODELING")
.
- type() - Method in interface nxopen.features.LawExtensionBuilderEx
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.MatchEdgeBuilder
-
Returns the type
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.
- type() - Method in interface nxopen.features.MatchedReferenceBuilder
-
Returns the matchedReference type
License requirements: None.
- type() - Method in interface nxopen.features.MoveFaceBuilder
-
Returns the type, don't use it until nx502
License requirements: None.
- type() - Method in interface nxopen.features.NSidedSurfaceBuilder
-
Returns the surface type
License requirements: features_modeling ("FEATURES MODELING"), nx_freeform_1 ("basic freeform modeling")
.
- type() - Method in interface nxopen.features.OffsetCurveBuilder
-
Returns the offset type
License requirements: None.
- type() - Method in interface nxopen.features.OffsetEmbossBuilder
-
Returns the center type
This defines input types: 0 stands for curve case and 1 stands for point case.
- type() - Method in interface nxopen.features.PatchOpeningsBuilder
-
Returns the method used to patch the opening
License requirements: None.
- type() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the pattern face type, don't use it until nx502
License requirements: None.
- type() - Method in interface nxopen.features.PointSetBuilder
-
Returns the type setting.
- type() - Method in interface nxopen.features.RefitFaceBuilder
-
Returns the refit type
License requirements: None.
- type() - Method in interface nxopen.features.ReplaceFaceBuilder
-
Returns the replace face type, don't use it until further notification
License requirements: None.
- type() - Method in interface nxopen.features.ScaleBuilder
-
- type() - Method in interface nxopen.features.SectionCurveBuilder
-
Returns the type of the section curve builder
License requirements: None.
- type() - Method in interface nxopen.features.SectionInertiaAnalysisBuilder
-
Returns the analysis
License requirements: None.
- type() - Method in interface nxopen.features.SectionSurfaceBuilder
-
- type() - Method in interface nxopen.features.SectionSurfaceBuilderEx
-
Returns the type.
- type() - Method in interface nxopen.features.SewBuilder
-
Returns the sew type
License requirements: None.
- type() - Method in interface nxopen.features.sheetmetal.AdvancedFlangeBuilder
-
Returns the advanced flange type
License requirements: None.
- type - Variable in class nxopen.features.sheetmetal.AeroFlangeBuilder.LengthData
-
length type Value/Infer
- type() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder
-
Returns the feature type
License requirements: None.
- type() - Method in interface nxopen.features.sheetmetal.BreakCornerBuilder
-
Returns the type of the break corner.
- type() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the transition type
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- type() - Method in interface nxopen.features.sheetmetal.ClosedCornerBuilder
-
Returns the feature type
License requirements: None.
- type() - Method in interface nxopen.features.sheetmetal.ExportFlatPatternBuilder
-
- type() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the type of Gusset feature
License requirements: None.
- type() - Method in interface nxopen.features.sheetmetal.HemFlangeBuilder
-
Returns the hem type
License requirements: nx_sheet_metal ("NX Sheet Metal")
.
- type() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.sheetmetal.NormalCutoutBuilder
-
Returns the type for the normal cutout.
- type() - Method in interface nxopen.features.sheetmetal.ResizeBendRadiusBuilder
-
Returns the feature type
License requirements: None.
- type() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.shipdesign.BulkHeadsBuilder
-
Returns the bulkhead type.
- type() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
Returns the value for how to process the bodies and faces.
- type() - Method in interface nxopen.features.shipdesign.DeckBuilder
-
Returns the method used to define the mold face of the deck.
- type() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the type of placement being used in the edge reinforcement definition.
- type() - Method in interface nxopen.features.shipdesign.ExcessMaterialBuilder
-
Returns the feature type (ie excess material or fitup)
License requirements: None.
- type() - Method in interface nxopen.features.shipdesign.FeaturesBatchOperationBuilder
-
Returns the operation type
License requirements: None.
- type() - Method in interface nxopen.features.shipdesign.GenericPlateSystemBuilder
-
Returns the method used to define the mold face of the generic plate system.
- type() - Method in interface nxopen.features.shipdesign.HullBuilder
-
Returns the method used to define the mold face of the hull.
- type() - Method in interface nxopen.features.shipdesign.InsertFramesBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.shipdesign.LongitudinalBulkheadBuilder
-
Returns the method used to define the mold face of the longitudinal bulkhead.
- type() - Method in interface nxopen.features.shipdesign.PillarSystemBuilder
-
Returns the type of input used to define the pillar location.
- type() - Method in interface nxopen.features.shipdesign.PlateBuilder
-
Returns the plate type, which is creation or adoption.
- type() - Method in interface nxopen.features.shipdesign.PlateChamferBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.shipdesign.ProfileBuilder
-
Returns the type belt or profile
License requirements: None.
- type() - Method in interface nxopen.features.shipdesign.RollingLineBuilder
-
Returns the value identifying what type of manufacturing process is to be applied to the surface for bending.
- type() - Method in interface nxopen.features.shipdesign.RoomBuilder
-
Returns the room generation type.
- type() - Method in interface nxopen.features.shipdesign.RoomPanelBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the type of seam being created.
- type() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the value defining how the coordinate system will be defined.
- type() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
- type() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo
-
Returns the type of Ship Preparation feature.
- type() - Method in interface nxopen.features.shipdesign.SteelDistributionBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.shipdesign.StiffenerBuilder
-
Returns the feature type: Stiffener or Edge Reinforcement
License requirements: None.
- type() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the method used to define the path of the stiffener system.
- type() - Method in interface nxopen.features.shipdesign.TransverseBulkheadBuilder
-
Returns the method used to define the mold face of the transverse bulkhead.
- type() - Method in interface nxopen.features.SilhouetteFlangeBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.SmoothCurveStringBuilder
-
Returns the type of input curves whether free or on surface.
- type() - Method in interface nxopen.features.SmoothSplineBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.SnipSurfaceBuilder
-
Returns the snipping method accessor
License requirements: None.
- type() - Method in interface nxopen.features.SphereBuilder
-
- type() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the spline method
License requirements: None.
- type() - Method in interface nxopen.features.StudioXformBuilder
-
- type() - Method in interface nxopen.features.StudioXformBuilderEx
-
Returns the editing type
License requirements: None.
- type() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the type
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- type() - Method in interface nxopen.features.StyledSweepBuilder
-
Returns the sweep type
License requirements: None.
- type() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- type() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the type.
- type() - Method in interface nxopen.features.subdivision.SubdivisionProjectCageBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.subdivision.SubdivisionSplitFaceBuilder
-
Returns the split type.
- type() - Method in interface nxopen.features.TextBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the box type.
- type() - Method in interface nxopen.features.TrimExtendBuilder
-
Returns the trim extend creation option
License requirements: None.
- type() - Method in interface nxopen.features.VarOffsetFaceBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the type of obstructing geometry being supplied.
- type() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingBuilder
-
Returns the vehicle loading type.
- type() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the type of impact study to perform
License requirements: None.
- type() - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder
-
Returns the vehicle coordinate system type
License requirements: None.
- type() - Method in interface nxopen.features.VirtualCurveBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.features.WrapBuilder
-
Returns the type of operation being performed.
- type() - Method in interface nxopen.FlatteningBuilder
-
- type() - Method in interface nxopen.formboard.FaceAnnotationBuilder
-
- type() - Method in interface nxopen.formboard.PathLengthAnnotationBuilder
-
Returns the type
License requirements: routing_harness ("Routing Harness")
.
- type() - Method in interface nxopen.geometricanalysis.DeviationChecking
-
Returns the deviation checking type.
- type() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
- type() - Method in interface nxopen.geometricanalysis.RadiusAnalysisBuilder
-
Returns the radius type.
- type() - Method in interface nxopen.geometricanalysis.ReflectionAnalysisBuilder
-
Returns the reflection analysis type.
- type() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionAnalysisBuilder
-
Returns the sectioning type
License requirements: studio_analyze ("STUDIO ANALYZE")
.
- type() - Method in interface nxopen.geometricanalysis.SurfaceContinuityAnalysisBuilder
-
Returns the type of analysis to perform
License requirements: None.
- type - Variable in class nxopen.geometricutilities.BooleanOperation.BooleanOperationAndBodyData
-
boolean type
- type() - Method in interface nxopen.geometricutilities.BooleanOperation
-
Returns the boolean operation type
License requirements: None.
- Type - Class in nxopen.geometricutilities
-
This enum represents the kind of offset
- type() - Method in interface nxopen.mechanicalrouting.AssignCornerBuilder
-
- type() - Method in interface nxopen.mechatronics.GanttOperationBuilder
-
Returns the type of simple operation.
- type() - Method in interface nxopen.mfg.am.SupportBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.motion.ControlInputBuilder
-
Returns the type of control input element.
- type() - Method in interface nxopen.motion.LinkCouplerBuilder
-
Returns the type
License requirements: mechanisms ("MECHANISMS")
.
- type() - Method in interface nxopen.motion.MotionSensorBuilder
-
Returns the sensor type
License requirements: None.
- type() - Method in interface nxopen.motion.PlantOutputBuilder
-
Returns the type
License requirements: nx_motion_cosim ("NX Motion CoSimulation")
.
- type() - Method in interface nxopen.motion.TextBasedElementBuilder
-
Returns the text based element type - multiple possible values
License requirements: mechanisms ("MECHANISMS")
.
- type - Variable in class nxopen.NXObject.AttributeInformation
-
Attribute type
- type() - Method in interface nxopen.partfamily.FamilyAttribute
-
Returns the type of the given attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.
- type - Variable in class nxopen.pid.OffSheetConnectorBuilder.ConnectionData
-
- type - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternCalloutTypeDisplay
-
The name of the callout type.
- type - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
-
Object type
- type - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveTypeDisplayData
-
Curve type
- type - Variable in class nxopen.preferences.PartSheetmetal.FlatPatternCalloutTypeDisplay
-
The name of the callout type.
- type - Variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
-
Object type
- type - Variable in class nxopen.preferences.PartSheetmetal.TabCurveTypeDisplayData
-
Curve type
- type - Variable in class nxopen.preferences.RoutingPartLibrary.Column
-
The value type the column stores.
- type() - Method in interface nxopen.routing.AssignDiscontinuityBuilder
-
Returns the type of Block
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- type - Variable in class nxopen.routing.CharacteristicList.CharacteristicInformation
-
characteristic type
- type() - Method in interface nxopen.routing.FittingOverstockBuilder
-
Returns the type
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- type - Variable in class nxopen.routing.FormboardFrame.ObjectData
-
- type() - Method in interface nxopen.routing.SubdivideSegmentBuilder
-
- Type - Class in nxopen.routing
-
Describes the type of overstock.
- type() - Method in interface nxopen.routing.WindCatcherBuilder
-
Returns the type of Wind Catcher.
- type - Variable in class nxopen.RuleManager.DebugRule
-
type of value
- type - Variable in class nxopen.Selection.MaskTriple
-
Object type.
- type() - Method in interface nxopen.SelectionIntentRule
-
Returns the get the type of selection intent rule:
SelectionIntentRule
License requirements: gateway ("UG GATEWAY")
Created in NX3.0.0
- type - Variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternCalloutTypeDisplay
-
The name of the callout type.
- type - Variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
-
Object type
- type() - Method in interface nxopen.sim.KinematicAxisBuilder
-
Returns the axis motion
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- type() - Method in interface nxopen.sim.KinematicChain
-
Returns the type of the kinematic chain
License requirements: None.
- type - Variable in class nxopen.Sketch.ConstraintGeometryHelp
-
Point or Parameter
- type() - Method in interface nxopen.SpreadsheetCellData
-
Returns the type of data in the cell.
- type() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the option for the Assembly drawing operation
License requirements: None.
- type() - Method in interface nxopen.tooling.AssignPatchBuilder
-
Returns the type for editing patch or parting
License requirements: None.
- type() - Method in interface nxopen.tooling.AutoDimensionBuilder
-
Returns the type create or edit ordinate dimension
License requirements: None.
- type() - Method in interface nxopen.tooling.BackingPadBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.tooling.BendInsertDesignBuilder
-
Returns the operation type of bending insert design.
- type() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the type.
- type() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the type of operation to perform - create or edit a blank.
- type() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the blank layout type.
- type() - Method in interface nxopen.tooling.ChangeoverManagementBuilder
-
Returns the type of changeover management.
- TYPE - Static variable in class nxopen.tooling.CompDrawingBuilder.FilterSelection
-
filter components by type
- type() - Method in interface nxopen.tooling.ConcurrentDesignManagementBuilder
-
Returns the type of concurrent design management.
- type() - Method in interface nxopen.tooling.CoolingDefineChannelBuilder
-
Returns the type of attributes assigned to the created body attribute type values.
- type() - Method in interface nxopen.tooling.CornerDesignBuilder
-
Returns the operation type of corner design.
- type() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the box type.
- type() - Method in interface nxopen.tooling.DefineCamBuilder
-
Returns the define cam type
License requirements: None.
- type() - Method in interface nxopen.tooling.DefineLifterBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the die base type.
- type() - Method in interface nxopen.tooling.DieEngProcessUpdateManagerBuilder
-
Returns the trim task or pierce task.
- type() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the type.
- type() - Method in interface nxopen.tooling.ElectrodeDeleteBuilder
-
Returns the object type to be deleted.
- type() - Method in interface nxopen.tooling.FaceSplitBuilder
-
Returns the split face type which splits a face by using curves, edges, plane, face, isolines or
intersected curves with another body
License requirements: None.
- type() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the operation type of general insert.
- type() - Method in interface nxopen.tooling.HoleReportBuilder
-
Returns the type of hole table
License requirements: None.
- type() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder
-
Returns the insert auxiliary type.
- type() - Method in interface nxopen.tooling.InsertEditToolsBuilder
-
Returns the insert edit type
License requirements: None.
- type() - Method in interface nxopen.tooling.LsdynaKfileGeneratorBuilder
-
Returns the type of operation to be run.
- type() - Method in interface nxopen.tooling.MotionSimulationBuilder
-
Returns the type to specify which operation of motion simulation takes effect.
- type() - Method in interface nxopen.tooling.MWCopySheetsBuilder
-
Returns the type of sheets, parting sheets, patched sheets, or both to be copied
License requirements: None.
- type() - Method in interface nxopen.tooling.MWDefineSheetsBuilder
-
Returns the type for defining Cavity and Core
License requirements: None.
- type() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the type show objects or attributes
License requirements: None.
- type() - Method in interface nxopen.tooling.PiercingInsertBuilder
-
Returns the type of piercing insert.
- type() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the operation type.
- type() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Returns the type of relief design.
- type() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the positioning object type that is from pattern or imported data
License requirements: None.
- type() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.tooling.SlugRetentionBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.tooling.SmartScrewUpdateBuilder
-
Returns the operation type of Tooling Part Family Part Tool.
- type() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.tooling.SplitSolidBuilder
-
Returns the operation type to do split body or trim body.
- type() - Method in interface nxopen.tooling.StockSizeBuilder
-
Returns the stock shape to be generated, it can be a block or cylinder.
- type() - Method in interface nxopen.tooling.SubInsertBuilder
-
Returns the parent part type
License requirements: None.
- type() - Method in interface nxopen.tooling.TrimSolidBuilder
-
Returns the type to select face, sheet body or manufacturing faces to trim the bounding box.
- type() - Method in interface nxopen.tooling.WireHoleBuilder
-
Returns the type
License requirements: None.
- type() - Method in interface nxopen.tooling.WorkpieceBuilder
-
Returns the selection type to select the work piece
License requirements: None.
- type - Variable in class nxopen.uf.UFClear.InterfData
-
- type - Variable in class nxopen.uf.UFClone.NameRuleDef
-
- type - Variable in class nxopen.uf.UFCutter.AskTypeAndSubtypeData
-
- type - Variable in class nxopen.uf.UFDisp.TextureSpaceInfo
-
- type - Variable in class nxopen.uf.UFFacet.AskSurfaceDataForFaceData
-
- type - Variable in class nxopen.uf.UFGdt.CalloutString
-
- type - Variable in class nxopen.uf.UFGdt.GeometricDefinition
-
- type - Variable in class nxopen.uf.UFGdt.LeaderSpec
-
- type - Variable in class nxopen.uf.UFModeling.AskFaceData
-
- type - Variable in class nxopen.uf.UFModeling.AskScaleData
-
- type - Variable in class nxopen.uf.UFModl.CompareEntityMatch
-
- type - Variable in class nxopen.uf.UFModl.DfoConstraint
-
- type - Variable in class nxopen.uf.UFModl.DimensionData
-
- type - Variable in class nxopen.uf.UFModl.SmcutoutData
-
- type - Variable in class nxopen.uf.UFModl.SmholeData
-
- type - Variable in class nxopen.uf.UFModl.SmslotData
-
- type - Variable in class nxopen.uf.UFModl.SolidPunchData
-
- type - Variable in class nxopen.uf.UFModl.UdfsExp
-
- type - Variable in class nxopen.uf.UFModlFeatures.AskEnlargeData
-
- type - Variable in class nxopen.uf.UFModlFeatures.AskLocalScaleData
-
- type - Variable in class nxopen.uf.UFModlFeatures.AskMoveRegionData
-
- type - Variable in class nxopen.uf.UFModlFeatures.AskTaperFromEdgesData
-
- type - Variable in class nxopen.uf.UFMotion.Measurement
-
- type - Variable in class nxopen.uf.UFObj.AskExtendedTypeAndSubtypeData
-
- type - Variable in class nxopen.uf.UFObj.AskTypeAndSubtypeData
-
- type - Variable in class nxopen.uf.UFParam.IndexAttribute
-
- type - Variable in class nxopen.uf.UFPath.CircularMotion
-
- type - Variable in class nxopen.uf.UFPath.HelicalMotion
-
- type - Variable in class nxopen.uf.UFPath.LinearMotion
-
- type - Variable in class nxopen.uf.UFRoute.CharDesc
-
- type - Variable in class nxopen.uf.UFSf.EdgeDensityData
-
- type - Variable in class nxopen.uf.UFView.AskPerspectiveData
-
- type - Variable in class nxopen.uf.UFView.AskTypeData
-
- type() - Method in interface nxopen.uistyler.FileOperationData
-
Returns the file operation type
License requirements: None.
- type() - Method in interface nxopen.validate.ResultObject
-
Returns the type of check result
License requirements: None.
- type() - Method in interface nxopen.visualreporting.Condition
-
- type() - Method in interface nxopen.weld.AutoPointBuilder
-
Returns the type of creation.
- type() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Returns the construction type used to create the datum surface.
- type() - Method in interface nxopen.weld.EasyPatternBuilder
-
Returns the type of pattern to created.
- type() - Method in interface nxopen.weld.TransformBuilder
-
Returns the transformation type
License requirements: ugweld ("UG WELD")
.
- type() - Method in interface nxopen.weld.WeldBeadBuilder
-
Returns the shape of the bead to create.
- type() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns the type of the groove
License requirements: ugweld ("UG WELD")
.
- type() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the creation type
License requirements: None.
- TYPE0 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE1 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE1 - Static variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkType
-
If the UDO is deleted the link between the UDO and the associated object is removed and the object is unaffected.
- TYPE10 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE11 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE12 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE13 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE14 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE15 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE2 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- type2() - Method in interface nxopen.geometricanalysis.HighlightLinesAnalysisBuilder
-
Returns the display type
License requirements: None.
- TYPE2 - Static variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkType
-
If the UDO is deleted the link between the UDO and the associated object is removed and the object is deleted.
- TYPE2D - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE2D_LENGTH - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE3 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE3 - Static variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkType
-
If the UDO is deleted the link between the UDO and the associated object is removed and the object is unaffected.
- TYPE3D - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE3D_LENGTH - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE4 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE4 - Static variable in class nxopen.userdefinedobjects.UserDefinedObject.LinkType
-
If the UDO is deleted the link between the UDO and the associated object is removed and the object is unaffected.
- TYPE5 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE6 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE7 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE8 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE9 - Static variable in class nxopen.fields.DisplayPropertiesBuilder.FieldQuantityType
-
- TYPE_ALONG_VECTOR - Static variable in class nxopen.cae.MeshPointProjectBuilder.ProjectionMethod
-
- TYPE_BYTE - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_CHAR - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_CUT - Static variable in class nxopen.uf.UFDrpos.Type
-
- TYPE_DATE - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_DOUBLE - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_DOUBLE_LENGTH - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_FINAL_LIFT - Static variable in class nxopen.uf.UFDrpos.Type
-
- TYPE_FIRST - Static variable in class nxopen.tooling.SlugRetentionBuilder.Types
-
- TYPE_FIRST_CUT - Static variable in class nxopen.uf.UFDrpos.Type
-
- TYPE_FLOAT - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_FOLDER - Static variable in class nxopen.uf.UFUgmgr.ObjectType
-
- TYPE_INT - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_LAST - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_LOCAL_LIFT - Static variable in class nxopen.uf.UFDrpos.Type
-
- TYPE_LOGICAL - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_MAPPED - Static variable in class nxopen.ame.LineDesignerMappingBuilder.FilterType
-
- TYPE_NEAREST_POINT - Static variable in class nxopen.cae.MeshPointProjectBuilder.ProjectionMethod
-
- TYPE_NONE - Static variable in class nxopen.uf.UFDrpos.Type
-
- TYPE_OBJECT - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_PART - Static variable in class nxopen.uf.UFUgmgr.ObjectType
-
- TYPE_PART_REVISION - Static variable in class nxopen.uf.UFUgmgr.ObjectType
-
- TYPE_POINTER - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_SECOND - Static variable in class nxopen.tooling.SlugRetentionBuilder.Types
-
- TYPE_SHORT - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_STEPOVER - Static variable in class nxopen.uf.UFDrpos.Type
-
- TYPE_STRING - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_TAG - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_UNKNOWN - Static variable in class nxopen.uf.UFUgmgr.ObjectType
-
- TYPE_VLA_INT - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_VLA_LENGTH - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_VLA_LENGTH_COMPOSITE - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_VLA_REAL - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_VLA_STRING - Static variable in class nxopen.uf.UFParam.Type
-
- TYPE_VLA_TAG - Static variable in class nxopen.uf.UFParam.Type
-
- TypeAndSubtypeData() - Constructor for class nxopen.cam.Tool.TypeAndSubtypeData
-
- typeAssignOrCheck() - Method in interface nxopen.tooling.ClearanceManagementBuilder
-
Returns the clearance management type.
- typeCount - Variable in class nxopen.uf.UFMfm.AskCandidateMachiningFeatureTypesData
-
- TypedConnectorFeature - Interface in nxopen.linedesigner
-
Represents a typed connector feature feature
To create or edit an instance of this class, use
TypedConnectorFeatureBuilder
Created in NX9.0.0
- TypedConnectorFeatureBuilder - Interface in nxopen.linedesigner
-
Represents a LineDesigner.TypedConnectorFeature
Features.FeatureBuilder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createTypedConnectorFeatureBuilder
Default values.
- TypedConnectorFeatureBuilder.BehaviorOnMismatch - Class in nxopen.linedesigner
-
This enum is providing possible behavior on mismatch in propagated expressions
- typeDesc() - Method in interface nxopen.mechatronics.FunctionObjectBuilder
-
Returns the type description
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.
- typeDescription() - Method in interface nxopen.cae.PostMesh
-
Returns the type descreption of the post mesh
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.
- typeEnum() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder
-
Returns the platform type enum
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- typeList - Variable in class nxopen.display.IrayPlusMaterialEditorBuilder.MaterialLayersInfoData
-
- TypeMappingBuilder - Interface in nxopen.ame
-
JA class for the type mapping dialog
this is a block
.
- TypeMappingBuilder.LoadData - Class in nxopen.ame
-
- TypeMappingBuilderList - Interface in nxopen.ame
-
Represents a list of objects.
- TypeMappingListBuilder - Interface in nxopen.ame
-
- typeName() - Method in interface nxopen.cam.InspectionCreatePathsBuilder
-
Returns the method type name
License requirements: None.
- typeName() - Method in interface nxopen.linedesigner.ReuseLibraryDragData
-
Returns an API to get type name
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.
- typeName() - Method in interface nxopen.mechatronics.LogicObjectBuilder
-
Returns the Type Name used for.
- typeName() - Method in interface nxopen.Unit
-
Returns the unit type name
License requirements: None.
- typeNames - Variable in class nxopen.uf.UFCam.OptAskTypesData
-
- typeOfCurve() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the method used to define the motion curve.
- typeOfDraft() - Method in interface nxopen.features.DraftBuilder
-
Returns the Draft type
License requirements: solid_modeling ("SOLIDS MODELING")
.
- typeOfIDB() - Method in interface nxopen.ame.InstanceDataBlockBuilder
-
Returns the defined rule type
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- typeOfIntersection - Variable in class nxopen.uf.UFCurve.IntersectInfo
-
- typeOfMotion() - Method in interface nxopen.presslinesimulation.UserMotionBuilder
-
Returns the type of motion.
- typeOfParameter() - Method in interface nxopen.cam.UdeParameter
-
Returns the type of the parameter
License requirements: None.
- typeOption() - Method in interface nxopen.cae.LbcAssociationMgr
-
Returns the bc type option
License requirements: None.
- typeOption() - Method in interface nxopen.motion.DriverOperation
-
Returns the type option
License requirements: None.
- typeProperty() - Method in interface nxopen.ame.ExtractAttributeRelativeBuilder
-
Returns the object to hold the type id
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- types() - Method in interface nxopen.ame.SubnetBuilder
-
Returns the subnet type
License requirements: None.
- types - Variable in class nxopen.cae.Result.AskResultTypesData
-
- types - Variable in class nxopen.mechatronics.ParameterStockBuilder.ParameterNamesAndTypesData
-
- types - Variable in class nxopen.mechatronics.TagTableBuilder.ParameterNamesAndTypesByIDData
-
- types - Variable in class nxopen.uf.UFGdt.AskTolerancesData
-
- types - Variable in class nxopen.uf.UFGdt.AskToleranceTypesData
-
- TYPES_LAST_VALUE - Static variable in class nxopen.cae.MeshControlBuilder.Types
-
- TYPES_SPECIFY - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathNormalTypes
-
Path Normal: Specify
- TYPES_TOOL_AXIS - Static variable in class nxopen.cam.OperationDisplayOptionsBuilder.PathNormalTypes
-
Path Normal: Tool axis
- TypesData() - Constructor for class nxopen.cae.FunctionBuilder.TypesData
-
- typeSelection() - Method in interface nxopen.ame.PlcSymbolsEvaluatorBuilder
-
Returns the type filter selection
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- typeStandard() - Method in interface nxopen.drawings.ViewSectionLineBuilder
-
Returns the section line symbol display
License requirements: None.
- typeStrings - Variable in class nxopen.motion.GraphObjectBuilder.QuantityTypesData
-
- typeValue() - Method in interface nxopen.features.CustomAttribute
-
Returns the custom attribute type value
License requirements: solid_modeling ("SOLIDS MODELING")
.
- tyUpper() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the translation in Y DOF upper limit
License requirements: None.
- tz() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the DOF setting in the Z Translation direction
License requirements: None.
- tzLower() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the translation in Z DOF lower limit
License requirements: None.
- tzUpper() - Method in interface nxopen.cam.InspectionAnalyzeBuilder
-
Returns the translation in Z DOF upper limit
License requirements: None.