A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _

H

H - Static variable in class nxopen.ame.InterruptionPointBuilder.Variant

H - Static variable in class nxopen.cam.TurnToolBuilder.HolderStyles

H-Style

H - Static variable in class nxopen.drawings.DrawingSheet.StandardSheetSize

28 X 44 inches

H - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType

H

h17 - Variable in class nxopen.HumanPosturePredictionBuilder.HandDataSaeData

AHP to steering wheel center height H17 expression

H264 - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioRemoteRenderFormatType

HALF - Static variable in class nxopen.cae.SetManager.DistributedPlanesBoundingSphereType

places the distributed planes on half a sphere

half() - Method in interface nxopen.drawings.SectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use SectionViewBuilder.sectionViewType()

HALF - Static variable in class nxopen.drawings.SectionLineBuilder.Types

Deprecated.

Creates or edits a HalfSectionLine

HALF - Static variable in class nxopen.drawings.SectionViewBuilder.SectionLineType

HALF - Static variable in class nxopen.drawings.SketchSectionLineBuilder.SectionLineTypes

HALF - Static variable in class nxopen.geometricutilities.CircularFrameBuilder.Subtypes

Half circle

HALF - Static variable in class nxopen.tooling.BlankLayoutBuilder.SnapSizeOption

the snap size is 1/2

HALF_PICTORIAL - Static variable in class nxopen.drawings.SectionLineBuilder.Types

Deprecated.

Creates or edits a HalfPictorialSectionLine

HALF_SCALE - Static variable in class nxopen.View.ScaleFactor

HALF_SINE_WAVE - Static variable in class nxopen.cae.DurabilityLoadPatternBuilder.PatternTypeEnum

Half

HALF_SIZE_FRACTION - Static variable in class nxopen.annotations.DimensionTextFormat

Specifies 1/2 size fraction format

HALF_SIZE_FRACTION - Static variable in class nxopen.uf.UFDrf.FractionType

HALF_SXLINE - Static variable in class nxopen.uf.UFDraw.SxlineType

HALF_UNIT_CYCLE - Static variable in class nxopen.uf.UFSf.LvFunctionMode

halfAngle() - Method in interface nxopen.features.ConeBuilder

Returns the half angle
License requirements: None.

halfAngle - Variable in class nxopen.uf.UFModlFeatures.AskConeParmsData

halfPictorial() - Method in interface nxopen.drawings.SectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. This API is not supported yet and should not be used.

HalfPictorialSectionLine - Interface in nxopen.drawings

Half Pictorial Section Line is used to create a pictorial view with half of the part sectioned and the other half un-sectioned.

HalfSectionLine - Interface in nxopen.drawings

Half Section Line is used to create a view with half of the part sectioned and the other half un-sectioned.

HalfSectionLineBuilder - Interface in nxopen.drawings

Deprecated.

Deprecated in NX10.0.0. Use SectionViewBuilder.sectionViewType() instead.

HalfSxsegs() - Constructor for class nxopen.uf.UFDraw.HalfSxsegs

HalfSxsegs(UFDrf.Object, UFDrf.Object, UFDrf.Object) - Constructor for class nxopen.uf.UFDraw.HalfSxsegs

HAMMERING - Static variable in class nxopen.annotations.FinishMethod

Specifies hammering finish

HAMMERING - Static variable in class nxopen.annotations.LineWeldDataBuilder.FinishSymbolType

HAND - Static variable in class nxopen.HumanData.HandFootType

Indicate the hand

HAND - Static variable in class nxopen.HumanData.SegmentScalingType

Indicate scaling of hand

HAND_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of hand_breadth

HAND_FIGURE - Static variable in class nxopen.HumanData.HandGoalType

Indicate the hand goal is hand figure

HAND_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of hand_length

HandDataSaeData() - Constructor for class nxopen.HumanPosturePredictionBuilder.HandDataSaeData

HandFootCsysData() - Constructor for class nxopen.HumanPosturePredictionBuilder.HandFootCsysData

handGripLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Returns the hand grip length.

handle() - Method in interface nxopen.NXColor

Returns an integer identifier for this object.

handleActiveColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting

Returns the color of active handles.

handleAnnotationForBasicDesign(boolean, boolean, boolean, DraftingCurve, NXObject, DraftingView) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder

Creates ship annotations for basic design structures.

handleApplicationEvents(AssembliesEventTypes, String, String[], int[]) - Method in interface nxopen.assemblies.WaveQuery

Provides application (e.g. the graphical browser) event processing by NX.

handleColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting

Returns the color of handles.

handleColor - Variable in class nxopen.uf.UFDisp.SystemParams

handleComplement() - Method in interface nxopen.SketchEllipseBuilder

Adjust the constraints and dimensions on ellipse vertices when we want to complement the ellipse
License requirements: None.

handleFixedSizeFlag() - Method in interface nxopen.blockstyler.AngularDimension

Returns the HandleFixedSizeFlag
License requirements: None.

handleLatestSelDirection() - Method in interface nxopen.fields.PathObjects

Check the direction of the lastest selection and reverse it if necessary
License requirements: None.

handLength() - Method in interface nxopen.features.vehicledesign.ManikinBuilder

Returns the hand length.

handleOrientation() - Method in interface nxopen.blockstyler.LinearDimension

Returns the HandleOrientation
License requirements: None.

handleOrientation() - Method in interface nxopen.blockstyler.RadiusDimension

Returns the HandleOrientation
License requirements: None.

handleOrientxpressColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting

Returns the color of the OrientXpress handle.

handleOrigin() - Method in interface nxopen.blockstyler.AngularDimension

Returns the HandleOrigin
License requirements: None.

handleOrigin() - Method in interface nxopen.blockstyler.LinearDimension

Returns the HandleOrigin
License requirements: None.

handleOrigin() - Method in interface nxopen.blockstyler.RadiusDimension

Returns the HandleOrigin
License requirements: None.

handlePoint() - Method in interface nxopen.geometricutilities.BlendSetbackBuilder

Returns the handle point for u/v direction.

handlePreselectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting

Returns the preselection color of handles.

handleRadius() - Method in interface nxopen.blockstyler.AngularDimension

Returns the HandleRadius
License requirements: None.

handleRadiusOffset() - Method in interface nxopen.blockstyler.AngularDimension

Returns the HandleRadiusOffset
License requirements: None.

handlesColor() - Method in interface nxopen.preferences.SessionVisualizationColorSetting

Deprecated.

Deprecated in NX7.5.0. Use PartVisualizationColorSetting.handleColor() and PartVisualizationColorSetting.setHandleColor(nxopen.NXColor) instead

handleSeamForNonSectionedPlateForBasicDesign(boolean, DraftingCurve, NXObject) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder

Add annotation of seam symbol for non-sectioned plate for basic design
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.

handleSeamForSectionedPlateForBasicDesign(boolean, DraftingBody, DraftingCurve[], DraftingCurve) - Method in interface nxopen.features.shipdesign.InteractiveAnnotationBuilder

Add annotation of seam symbol for sectioned plate for basic design
License requirements: nx_ship_drafting ("Ship Drafting") OR nx_ship_gen_arrange ("Ship General Arrangement")
.

handleSelectionColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting

Returns the selection color of handles.

handleSize() - Method in interface nxopen.preferences.VisualizationHandles

Returns the default handle size
License requirements: None.

handleXAxis() - Method in interface nxopen.blockstyler.AngularDimension

Returns the HandleXAxis
License requirements: None.

handleZAxis() - Method in interface nxopen.blockstyler.AngularDimension

Returns the HandleZAxis
License requirements: None.

handlingBodies() - Method in interface nxopen.drawings.ViewWorkflowBuilder

Deprecated.

Deprecated in NX9.0.3. Use ViewWorkflowBuilder.handlingBodiesTypes() instead.

handlingBodiesTypes() - Method in interface nxopen.drawings.ViewWorkflowBuilder

Returns the handling bodies provides option for update view without lightweight data
License requirements: None.

HandlingCore - Interface in nxopen.die

Represents a die design handling core feature.

HandlingCoreBuilder - Interface in nxopen.die

Represents a builder that is used to create or edit a HandlingCore feature.

HandlingCoreBuilder.Types - Class in nxopen.die

Identifies how the handling Core is located in space.

HandlingCoreChildBuilder - Interface in nxopen.die

Represents a Die Handling Core Child sub feature.

handlingCoreParent() - Method in interface nxopen.die.DrawDiePunchBuilder

Returns the handling core parent builder of the draw die punch.

HandlingCoreParentBuilder - Interface in nxopen.die

Represents a Die Handling Core Parent sub feature.

handlingHoleParent() - Method in interface nxopen.die.RotorBuilder

Returns the handling holes parent builder of the rotor.

HandrailBuilder - Interface in nxopen.routing

Represents a HandrailBuilder Creates a handrail from a selected point.

HandrailBuilder.PostTypes - Class in nxopen.routing

The post type: Start, Intermediate, None, End.

handshapeName() - Method in interface nxopen.HumanHandShapeData

Returns the name of the hand shape in the list
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

handshapeValue() - Method in interface nxopen.HumanHandShapeData

Returns the value for applying the hand shape
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

handType() - Method in interface nxopen.HumanHandShapeData

Returns the hand type
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

hanger() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the hanger
License requirements: None.

hangerNumber() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the hanger number
License requirements: None.

HANGUL - Static variable in class nxopen.features.TextBuilder.ScriptOptions

Specifies the Hangul Korean character set

HARD - Static variable in class nxopen.assemblies.ClearanceSet.InterferenceType

HARD - Static variable in class nxopen.motion.TirePropertyAdvancedParameters.SurfType

HARD_EDGED - Static variable in class nxopen.display.ImageBasedLighting.ShadowsType

Hard-edged, precise shadows will be generated using a ray-tracing algorithm.

HARD_EDGED - Static variable in class nxopen.display.LightBuilder.ShadowType

Hard-edged, precise shadows will be generated using a ray-tracing algorithm.

hardness - Variable in class nxopen.cam.CAMSetup.PartMaterialData

hardness - Variable in class nxopen.cam.FeatureGeomBuilder.MaterialData

hardObjSelection() - Method in interface nxopen.cae.CAEWeldConnectionBuilder

Returns the hard obj selection
License requirements: None.

HARDWARE - Static variable in class nxopen.preferences.PartVisualizationLine.LineFontDisplayType

hardwareObjectsAttributeInformation() - Method in interface nxopen.ame.AmeDebugSession

Prints Stations information
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.

harmDisp - Variable in class nxopen.uf.UFMotion.JointMotionInput

HARMONIC - Static variable in class nxopen.cae.BaseIteration.IterationValueType

Value represents a Harmonic

HARMONIC - Static variable in class nxopen.cae.ResultProbeBuilder.SuperIterType

HARMONIC - Static variable in class nxopen.motion.DriverOperation.Type

Harmonic

HARMONIC_INPUT - Static variable in class nxopen.uf.UFMotion.JointMotionInputType

harmonicDisplacementExpression() - Method in interface nxopen.motion.DriverOperation

Returns the harmonic displacement expression
License requirements: None.

harmonicIndex() - Method in interface nxopen.cae.ResultProbeBuilder

Returns the harmonic index
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

HARNESS - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType

Harness.

HARNESS - Static variable in class nxopen.routing.RouteManager.FindObjectType

harness - Variable in class nxopen.uf.UFRoute.AskStockHarnessData

harness - Variable in class nxopen.uf.UFRoute.AskWireHarnessData

HarnessDefinition - Interface in nxopen.routing.electrical

Represents a HarnessDefinition
Creator not available in KF.

HarnessDevice - Interface in nxopen.routing.electrical

The Electrical HarnessDevice corresponds to a harness instance of the SingleDevice .

HarnessDeviceCollection - Interface in nxopen.routing.electrical

Represents a collection of HarnessDevice objects.

harnessDevices() - Method in interface nxopen.routing.RouteManager

HarnessDevice collection .

harnessObject() - Method in interface nxopen.formboard.UpdateDiscrepancy

Returns the object in the 3D harness referenced by the discrepancy.

harnessPartOccurrence() - Method in interface nxopen.routing.electrical.PathArrangementBuilder

Returns the harness component in the context of the part that was used to create the extracted port.

HARTSMITH - Static variable in class nxopen.PhysicalMaterial.Type

Hart-Smith material

HARWELL - Static variable in class nxopen.motion.LmsSolverProperty.DynamicAccelerationMethods

has911Attribute(CAMObject.Attr) - Method in interface nxopen.cam.CAMObject

Check if a 911 attribute exists in an object.

HAS_ASSERTION - Static variable in class nxopen.uf.UFWeight.ExceptionReason

hasAbsoluteColorPlot() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns a value indicating whether to plot using absolute value
License requirements: studio_free_form ("STUDIO FREE FORM")
.

hasActiveValues() - Method in interface nxopen.weld.CharacteristicsBuilder

Returns true if the characteristics builder has any active values.

hasAdditionalValuesLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns a value indicating whether to add additional values label
License requirements: studio_free_form ("STUDIO FREE FORM")
.

hasAllReferencingStockComponentsLoaded(TaggedObject) - Method in interface nxopen.routing.RouteManager

Checks whether all the stock components referenced by the given Routing object are loaded or not.

hasanchorpoint - Variable in class nxopen.cae.xyplot.Graph.AnchorPointOfRecordData

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData

True if element has element associated data defined.

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBushingData

True if element has element associated data defined.

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskConstraintEquationData

True if element has element associated data defined.

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskDamperData

True if element has element associated data defined.

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskGapData

True if element has element associated data defined.

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskInterpolationData

True if element has element associated data defined.

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskLumpedMassData

True if element has element associated data defined.

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskRigidData

True if element has element associated data defined.

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData

True if element has element associated data defined.

hasassociateddatadefined - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskSpringData

True if element has element associated data defined.

hasAssociativeOrigin() - Method in interface nxopen.annotations.Annotation

Returns a flag indicating whether the origin is associative
License requirements: None.

hasAssociativeOrigin(Tag) - Method in interface nxopen.uf.UFDrf

Refer to UF_DRF_has_associative_origin for documentation.

hasAttachment() - Method in interface nxopen.mechatronics.ProxyOverrideObjectBuilder

Returns the flag for whether the proxy override object has an attachment
License requirements: nx_mcd_core ("MECHATRONICS CONCEPT DESIGNER")
.

hasAttribute - Variable in class nxopen.uf.UFAttr.GetBoolUserAttributeData

hasAttribute - Variable in class nxopen.uf.UFAttr.GetComputationalTimeUserAttributeData

hasAttribute - Variable in class nxopen.uf.UFAttr.GetIntegerUserAttributeData

hasAttribute - Variable in class nxopen.uf.UFAttr.GetRealUserAttributeData

hasAttribute - Variable in class nxopen.uf.UFAttr.GetReferenceStringOfUserAttributeData

hasAttribute - Variable in class nxopen.uf.UFAttr.GetStringTimeUserAttributeData

hasAttribute - Variable in class nxopen.uf.UFAttr.GetStringUserAttributeData

hasAttribute - Variable in class nxopen.uf.UFAttr.GetUserAttributeLockWithTitleAndTypeData

hasAvoidanceType - Variable in class nxopen.uf.UFCamgeom.AppData

hasBecomeDumb(Tag) - Method in interface nxopen.uf.UFSo

Refer to UF_SO_has_become_dumb for documentation.

hasBlankDistance - Variable in class nxopen.uf.UFCambnd.AppData

hasColorAttribute() - Method in interface nxopen.cae.AttributeSelectionRecipe

Returns the presence of the color attribute.

hasColumnLabels() - Method in interface nxopen.blockstyler.Table

Returns the HasColumnLabels
License requirements: None.

hasCriteriaValue() - Method in interface nxopen.cae.modelcheck.ITestValue

Tells whether there is criteria value associated with this test
License requirements: None.

hasCrossCurveDeviationLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns a value indicating whether to display cross_curve deviation label
License requirements: studio_free_form ("STUDIO FREE FORM")
.

hasCsysImport() - Method in interface nxopen.linedesigner.ReuseLibraryDragData

Returns an API to check if drag data has csys import
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

hasCustomAttribute(String, CustomAttribute.Type) - Method in interface nxopen.features.CustomFeatureData

Checks if the custom feature attribute of given name and type exists
License requirements: solid_modeling ("SOLIDS MODELING")
.

hasCustomScratchDirectory() - Method in interface nxopen.cae.optimization.TBSOutputControlOptions

Returns whether to use a custom cratch directory or not when solving
License requirements: None.

hasCutStock - Variable in class nxopen.uf.UFCamgeom.AppData

hasDepthTolerance(Tag) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_has_depth_tolerance for documentation.

hasDirectedDimension(Tag) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_has_directed_dimension for documentation.

hasDrawingSheetColors(Tag) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_has_drawing_sheet_colors for documentation.

hasDrawingSheetWidths(Tag) - Method in interface nxopen.uf.UFPlot

Refer to UF_PLOT_has_drawing_sheet_widths for documentation.

hasEdge() - Method in interface nxopen.cae.PostSelectionEntity

Tells if Edge is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

hasElem() - Method in interface nxopen.cae.PostSelectionEntity

Tells if Element label is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

hasEntryWithName(String) - Method in interface nxopen.menubar.ContextMenu

Indicates whether or not this menu contains a ContextMenuEntry which has the given name.

hasFace() - Method in interface nxopen.cae.PostSelectionEntity

Tells if Face is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

hasFeedrate - Variable in class nxopen.uf.UFCambnd.AppData

hasFeedrate - Variable in class nxopen.uf.UFCamgeom.AppData

hasFitDirection() - Method in interface nxopen.features.RefitFaceBuilder

Returns a flag that shows refit face direction in use
License requirements: None.

hasGeometricDefinition(Tag) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_has_geometric_definition for documentation.

hashCode() - Method in class nxopen.Enum

Returns a hash code for this enum

hashCode() - Method in class nxopen.Tag

Returns a hash code for this Tag

hasHelpParameter1 - Variable in class nxopen.ISketchHelpedConstraint.HelpData

Whether the constraint's first associated geometric item has an associated help parameter

hasHelpParameter2 - Variable in class nxopen.ISketchHelpedConstraint.HelpData

Whether the constraint's second associated geometric item has an associated help parameter

hasHelpPoint1 - Variable in class nxopen.ISketchHelpedConstraint.HelpData

Whether the constraint's first associated geometric item has an associated help point

hasHelpPoint2 - Variable in class nxopen.ISketchHelpedConstraint.HelpData

Whether the constraint's second associated geometric item has an associated help point

hasHingeVector() - Method in interface nxopen.geometricutilities.StyledSweepReferenceMethodBuilder

Returns a value indicating whether there is a hinge vector
License requirements: None.

hasHorizontalRails() - Method in interface nxopen.routing.HandrailBuilder

Returns an option to create horizontal rail stock
License requirements: routing_platform ("Routing Platform")
.

hasInfoLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns a value indicating whether to enable floating info label
License requirements: studio_free_form ("STUDIO FREE FORM")
.

hasInitialValue() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

Returns the has initial value
License requirements: None.

hasInnerToleranceLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns a value indicating whether to display inner tolerance label
License requirements: studio_free_form ("STUDIO FREE FORM")
.

hasInstanceUserAttribute(String, NXObject.AttributeType, int) - Method in interface nxopen.assemblies.Component

Determines if and attribute with the given Title, Type and array Index is present on the object If the attribute is not an array, the Index is ignored (if this is known beforehand, we recommend setting the Index to -1 to save time).

hasIntermediateComponents() - Method in interface nxopen.routing.electrical.ElectricalStockDevice

Does this stock device have intermediate components?

hasLeaderPositionParameter() - Method in interface nxopen.annotations.Gdt

Returns a flag indicating whether this GDT has a leader position parameter.

hasLightWeightAnalytics() - Method in interface nxopen.facet.FacetedBody

Returns whether the FACET has analytical information.

hasLimitsAndFitsTolerance(Tag) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_has_limits_and_fits_tolerance for documentation.

hasLinearTransition() - Method in interface nxopen.geometricutilities.CurveShapingBuilder

Returns the value indicating if transition type is linear
License requirements: None.

hasLowerBound() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

Returns the has lower bound
License requirements: None.

hasMasterPath() - Method in interface nxopen.cam.Operation

Has Master Tool Path
License requirements: cam_base ("CAM BASE")
.

hasMaximumValueLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns a value indicating whether to display maximum value label
License requirements: studio_free_form ("STUDIO FREE FORM")
.

hasMaxNeedleLength() - Method in interface nxopen.geometricutilities.CombOptionsBuilder

Returns the maximum needle flag
License requirements: None.

hasMinimumValueLabel() - Method in interface nxopen.geometricanalysis.DeviationGaugeBuilder

Returns a value indicating whether to display minimum value label
License requirements: studio_free_form ("STUDIO FREE FORM")
.

hasModalMass() - Method in interface nxopen.cae.BaseIteration

Whether this modal iteration has any mass value
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.

hasNameAttribute() - Method in interface nxopen.cae.AttributeSelectionRecipe

Returns the presence of the name attribute.

hasNext() - Method in class nxopen.TaggedObjectCollection.Iterator

Returns true if the collection has more elements

hasNextSearchReultsPage() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder

HasNextSearchReultsPage
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.

hasNode() - Method in interface nxopen.cae.PostSelectionEntity

Tells if Node label is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

hasNonDisplayableEntities() - Method in interface nxopen.cae.CaeGroup

Returns whether the group has non-displayable entities
License requirements: None.

hasNonDisplayableEntities() - Method in interface nxopen.cae.SelectionRecipe

Returns whether the Selection Recipe has non-displayable entities
License requirements: None.

hasOffset - Variable in class nxopen.uf.UFCamgeom.AppData

hasOriginGwif() - Method in interface nxopen.blockstyler.SpecifyOrientation

Returns the HasOriginGwif
License requirements: None.

hasOtherInstances() - Method in interface nxopen.cam.Operation

Returns the indicator to show if the operation has other instances
License requirements: cam_base ("CAM BASE")
.

hasParentlibrarymaterial() - Method in interface nxopen.PhysicalMaterial

Returns whether the material was copied from a library material
License requirements: None.

hasParentmaterial() - Method in interface nxopen.PhysicalMaterial

Returns whether the material was copied from another material
License requirements: None.

hasPlaneConstraint() - Method in interface nxopen.features.PolylineBuilder

Returns the flag indicating if polyline has plane constraint
License requirements: None.

hasPlaneConstraint() - Method in interface nxopen.features.StudioSplineBuilderEx

Returns the flag indicating if spline has plane constraint
License requirements: None.

hasPoint() - Method in interface nxopen.cae.PostSelectionEntity

Tells if Point is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

hasPreview() - Method in interface nxopen.View

Returns whether or not the given view has a preview.

hasPreviousSearchResultsPage() - Method in interface nxopen.tooldesigner.SelectFixtureUnitsBuilder

HasPreviousSearchResultsPage
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.

hasProperty(CustomAttribute.Property) - Method in interface nxopen.features.CustomAttribute

The custom attribute does property exist on attribute
License requirements: solid_modeling ("SOLIDS MODELING")
.

hasProportionalUpdate() - Method in interface nxopen.features.StudioSplineBuilderEx

Returns the flag indicating if free or non attached defining points or poles should be moved proportionally during update of the spline feature
License requirements: None.

hasRadius() - Method in interface nxopen.features.FitCurveBuilder

Returns the has radius
License requirements: None.

hasresult - Variable in class nxopen.cae.SimSolveManager.ChainOfPrerequisitesData

returns if the nth prerequisite has a result

hasReuseTemplate() - Method in interface nxopen.Part

Returns the indicator that the part contains a reuse template.

hasReversedDirection() - Method in interface nxopen.features.FitCurveBuilder

Returns the flag indicating if fitted curve direction should be reversed
License requirements: None.

hasRotationAngle() - Method in interface nxopen.cae.PostSelectionEntity

Tells if Rotation Angle is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

hasSameConvexity - Variable in class nxopen.EdgeMultipleSeedTangentRule.Data

True: will only find tangnet edges that has the same convexity

hasSameConvexity - Variable in class nxopen.EdgeTangentRule.Data

True: will only find tangnet edges that has the same convexity

hasSameConvexity - Variable in class nxopen.EdgeVertexTangentRule.Data

True: will only find tangent edges that has the same convexity

hasSameConvexity - Variable in class nxopen.FaceTangentRule.Data

True: will only find tangnet faces that has the same convexity

hasSE() - Method in interface nxopen.cae.PostSelectionEntity

Tells if Super Element id is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

hasSectionAssignedAtAftEnd() - Method in interface nxopen.cae.BeamElementInfo

Returns a boolean value that indicates whether a cross section object is assigned to the aft end of the beam element.

hasSectionAssignedAtForeEnd() - Method in interface nxopen.cae.BeamElementInfo

Returns a boolean value that indicates whether a cross section object is assigned to the fore end of the beam element.

hasSector() - Method in interface nxopen.cae.PostSelectionEntity

Tells if Sector is set
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

hasSelected() - Method in interface nxopen.uistyler.SingleSelectList

Returns whether or not an item has been selected
License requirements: None.

hasSelectedFeaList() - Method in interface nxopen.uf.UFMfm

Refer to UF_MFM_has_selected_fea_list for documentation.

hasSelfIpw(Tag) - Method in interface nxopen.uf.UFOper

Refer to UF_OPER_has_self_ipw for documentation.

hasSizeTolerance(Tag) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_has_size_tolerance for documentation.

hasSketchImport() - Method in interface nxopen.linedesigner.ReuseLibraryDragData

Returns an API to check if drag data has sketch to import
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

hasSourceFacesInWeldPart(Feature) - Method in interface nxopen.weld.CustomManager

Method to determine if a JointmarkElement feature has source faces in the weld part.

hasStatus(SpreadsheetDataParameter.Status) - Method in interface nxopen.tooling.SpreadsheetDataParameter

Check if the parameter has the given status
License requirements: None.

hasStock - Variable in class nxopen.uf.UFCambnd.AppData

hasStock - Variable in class nxopen.uf.UFCamgeom.AppData

hasStub() - Method in interface nxopen.annotations.LeaderData

Returns the stub status of the defined leader.

hasStubbedDatumStyle() - Method in interface nxopen.annotations.Gdt

Returns a flag indicating whether the leader has a stubbed datum style.

hasSuppressedGeom(CAMObject) - Method in interface nxopen.cam.CAMSetup

Check for suppressed geometry
License requirements: cam_base ("CAM BASE")
.

hasSymmetricModelingConstraint() - Method in interface nxopen.features.GeometricConstraintData

Returns the flag indicating if tangent direction is used for creating symmetric modeling constraint.

hasTestValue - Variable in class nxopen.cae.modelcheck.ElementQualityCheckResults.TestSummary

indicates whether the test has a test value.

hasTestValue() - Method in interface nxopen.cae.modelcheck.TestResult

Tells whether there is a test value associated with this test
License requirements: None.

hasTolerances - Variable in class nxopen.uf.UFCambnd.AppData

hasTolerances - Variable in class nxopen.uf.UFCamgeom.AppData

hasToolPosition - Variable in class nxopen.uf.UFCambnd.AppData

hasTopologyInformation() - Method in interface nxopen.facet.FacetedBody

Returns whether the FACET has topology information.

hasTransform - Variable in class nxopen.DisplayManager.J3dData

true if an assembly transform is used

hasTransform - Variable in class nxopen.uf.UFDisp.J3dEntity

hasUniformSegments() - Method in interface nxopen.features.FitCurveBuilder

Returns the flag indicating if uniform segments should be created
License requirements: None.

hasUnitsMenu() - Method in interface nxopen.blockstyler.ExpressionBlock

Returns the HasUnitsMenu.

hasUpperBound() - Method in interface nxopen.cae.ModelUpdateDesignVariablesRapidCreateBuilder

Returns the has upper bound
License requirements: None.

hasUserAttribute(AttributeIterator) - Method in interface nxopen.NXObject

Determines if an attribute exists on the object, that satisfies the given iterator
License requirements: None.

hasUserAttribute(String, NXObject.AttributeType, int) - Method in interface nxopen.NXObject

Determines if an attribute with the given Title, Type and array Index is present on the object Unset attributes will not be detected by this function, as its purpose is to test for the actual presence of the attribute on the object.

hasUserAttributeWithTitleAndType(Tag, String, int, int) - Method in interface nxopen.uf.UFAttr

Refer to UF_ATTR_has_user_attribute_with_title_and_type for documentation.

hasUserSpecifiedValue() - Method in interface nxopen.visualreporting.Condition

Returns whether this Condition requires user input.

hasWallThickness(Tag) - Method in interface nxopen.uf.UFGdt

Refer to UF_GDT_has_wall_thickness for documentation.

hasWriteAccess() - Method in interface nxopen.BasePart

Returns the write-access status of a part independent of the load state.

HAT - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType

Hat

HAT1 - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType

Hat1

Hatch - Interface in nxopen.annotations

Represents a crosshatch or area fill
To create or edit an instance of this class, use HatchBuilder

Created in NX6.0.0

HATCH_DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

HATCH_FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

hatchAngle() - Method in interface nxopen.annotations.HatchStyleBuilder

Returns the angle of the crosshatching lines
License requirements: None.

hatchAngle() - Method in interface nxopen.features.MasterCutBuilder

Returns the hatch angle
License requirements: solid_modeling ("SOLIDS MODELING")
.

hatchAngle - Variable in class nxopen.uf.UFDrf.HatchFillPreferences

HatchBuilder - Interface in nxopen.annotations

This class is used to construct the crosshatching that lies within a boundary.

HatchBuilder.AnnotationTypes - Class in nxopen.annotations

Deprecated.

Deprecated in NX7.5.0. Use HatchBuilder.hatchFillSettings() instead.

HatchCollection - Interface in nxopen.annotations

Represents a collection of Hatch objects
To obtain an instance of this class, refer to AnnotationManager

Created in NX6.0.0

hatchCurve - Variable in class nxopen.uf.UFDraw.BreakRegionBoundary

hatchDistance() - Method in interface nxopen.annotations.HatchStyleBuilder

Returns the distance between crosshatch lines
License requirements: None.

hatchDistance() - Method in interface nxopen.features.MasterCutBuilder

Returns the hatch distance
License requirements: solid_modeling ("SOLIDS MODELING")
.

hatchDistance - Variable in class nxopen.uf.UFDrf.HatchFillPreferences

hatches() - Method in interface nxopen.annotations.AnnotationManager

Hatch collection .

hatchFile() - Method in interface nxopen.annotations.HatchStyleBuilder

Returns the crosshatch definition file
License requirements: None.

hatchFile - Variable in class nxopen.uf.UFDrf.HatchFillPreferences

HatchFillPreferences() - Constructor for class nxopen.uf.UFDrf.HatchFillPreferences

HatchFillPreferences(double, double, double, String, String, UFDrf.AreaFillMaterial, double, double, int, UFDrf.LineWidth) - Constructor for class nxopen.uf.UFDrf.HatchFillPreferences

hatchFillSettings() - Method in interface nxopen.annotations.HatchBuilder

Returns the HatchFillSetting
License requirements: None.

HatchFillSettingsBuilder - Interface in nxopen.annotations

This class is used to construct the Crosshatch and area Fill setting block .

HatchFillSettingsBuilder.AnnotationTypes - Class in nxopen.annotations

the valid types of hatch objects

hatchMaterial() - Method in interface nxopen.annotations.HatchStyleBuilder

Returns the crosshatch material
License requirements: None.

hatchMaterial - Variable in class nxopen.uf.UFDrf.HatchFillPreferences

hatchStyle() - Method in interface nxopen.annotations.StyleBuilder

Returns the hatch style builder
License requirements: None.

HatchStyleBuilder - Interface in nxopen.annotations

Represents a HatchStyleBuilder .

hatchTag - Variable in class nxopen.uf.UFDraw.ViewBoundary

hatchTolerance - Variable in class nxopen.uf.UFDrf.HatchFillPreferences

HBDY - Static variable in class nxopen.uf.UFSf.ElementType

HDF5DIR - Static variable in class nxopen.uf.UFUi.DialogDirId

HDF5FLTR - Static variable in class nxopen.uf.UFUi.DialogFilterId

HEAD - Static variable in class nxopen.HumanData.InverseKinematicsBodyParts

Indicate inverse kinematics body parts named head

HEAD - Static variable in class nxopen.HumanData.SegmentScalingType

Indicate scaling of head

HEAD - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass

Head class

head() - Method in interface nxopen.tooling.ElectrodeDeleteBuilder

Returns the utility to get sparking solid to delete.

head() - Method in interface nxopen.tooling.EWMultiPositionBuilder

Returns the head to match to another possible head.

HEAD_AND_LEG_IMPACT - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Types

Head and leg impact study

HEAD_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of head_breadth

HEAD_HEIGHT - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of head_height

HEAD_IMPACT - Static variable in class nxopen.features.vehicledesign.PedestrianProtectionBuilder.Types

Head impact study only

HEAD_LENGTH - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of head_length

headBodies() - Method in interface nxopen.tooling.ElectrodeBlankBuilder

Returns the head bodies to be used to create a blank.

HeadConnectorFeature - Interface in nxopen.linedesigner

Represents a typed connector feature feature
To create or edit an instance of this class, use TypedConnectorFeatureBuilder

Created in NX9.0.0

headControl - Variable in class nxopen.uf.UFDraw.ArrowParms

headDesignation() - Method in interface nxopen.cam.ToolChangeCiBuilder

Returns the head designation Type
License requirements: None.

headDiameter() - Method in interface nxopen.cae.connections.Bolt

Returns the head diameter
License requirements: None.

headDiameter() - Method in interface nxopen.cae.connections.ConnectionData

Returns the head diameter
License requirements: None.

headDiameter() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the diameter of the headform
License requirements: None.

headDiameterCoefficient() - Method in interface nxopen.cae.connections.Bolt

Returns the head diameter coefficient
License requirements: None.

headDiameterMarginal() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the marginal diameter of the headform
License requirements: None.

headDiameterType() - Method in interface nxopen.cae.connections.Bolt

Returns the head diameter type
License requirements: None.

HeadDiameterType - Class in nxopen.cae.connections

Head diameter definition types

headEdge() - Method in interface nxopen.cae.BoltBuilder

Returns the selected head edge(s)
License requirements: None.

header - Variable in class nxopen.uf.UFSfLegend.Attr

HEADER_LOCATION_ABOVE - Static variable in class nxopen.uf.UFTabnot.HeaderLocation

HEADER_LOCATION_BELOW - Static variable in class nxopen.uf.UFTabnot.HeaderLocation

HEADER_LOCATION_NONE - Static variable in class nxopen.uf.UFTabnot.HeaderLocation

HEADER_ONLY - Static variable in class nxopen.cae.Post.Legend

headerFile() - Method in interface nxopen.motion.MechatronicsBuilder

Returns the header file - matlab speciffic header file, that contains the definition of the interface (inputs, outputs)
License requirements: mechanisms ("MECHANISMS")
.

headerInfo() - Method in interface nxopen.STLCreator

Returns the header info - STL header information
License requirements: None.

Headerlines() - Constructor for class nxopen.cae.Post.Headerlines

Headerlines(boolean, String) - Constructor for class nxopen.cae.Post.Headerlines

Constructor for the Headerlines object.

headerLocation() - Method in interface nxopen.annotations.TableSectionStyleBuilder

Returns the value that represents the location of header on a section
License requirements: None.

HeaderLocation - Class in nxopen.diagramming.tables

Represents the table header location.

headerLocation() - Method in interface nxopen.diagramming.tables.TableSettingsBuilder

Returns the header location of the table settings.

headerLocation - Variable in class nxopen.uf.UFTabnot.SectionPrefs

HeaderOrientation - Class in nxopen.diagramming.tables

Represents the table header orientation.

headerOrientation() - Method in interface nxopen.diagramming.tables.TableSettingsBuilder

Returns the header orientation of the table settings.

headEyeType() - Method in interface nxopen.features.HumanBuilder

Returns the head eye type of active reach
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

HeadImpact - Interface in nxopen.features.vehicledesign

Represents a head impact feature.

HeadImpactAPillar - Interface in nxopen.features.vehicledesign

Represents a head impact a-pillar feature.

HeadImpactAPillarBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactAPillarBuilder .

HeadImpactAPillarDetailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactAPillarDetailBuilder .

HeadImpactAPillarDetailBuilder.MeasurementMethodType - Class in nxopen.features.vehicledesign

Represents the measurement methods used to position point 1.

HeadImpactAPillarWizardBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactAPillarWizardBuilder .

HeadImpactBPillar - Interface in nxopen.features.vehicledesign

Represents a head impact b-pillar feature.

HeadImpactBPillarBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactBPillarBuilder .

HeadImpactBPillarDetailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactBPillarDetailBuilder .

HeadImpactBPillarWizardBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactBPillarWizardBuilder .

HeadImpactBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactBuilder .

HeadImpactBuilder.CalculationType - Class in nxopen.features.vehicledesign

Represents the calculation types.

HeadImpactBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign

Represents the requirements control types.

HeadImpactFrontHeader - Interface in nxopen.features.vehicledesign

Represents a head impact front header feature.

HeadImpactFrontHeaderBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactFrontHeaderBuilder .

HeadImpactFrontHeaderDetailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactFrontHeaderDetailBuilder .

HeadImpactFrontHeaderWizardBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactFrontHeaderWizardBuilder .

HeadImpactOPillar - Interface in nxopen.features.vehicledesign

Represents a head impact side rail feature.

HeadImpactOPillarBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactOPillarBuilder .

HeadImpactOPillarDetailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactOPillarDetailBuilder .

HeadImpactOPillarWizardBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactOPillarWizardBuilder .

HeadImpactOtherRail - Interface in nxopen.features.vehicledesign

Represents a head impact additional side rail feature.

HeadImpactOtherRailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactOtherRailBuilder .

HeadImpactOtherRailDetailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactOtherRailDetailBuilder .

HeadImpactOtherRailWizardBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactOtherRailWizardBuilder .

HeadImpactRearHeader - Interface in nxopen.features.vehicledesign

Represents a head impact rear header feature.

HeadImpactRearHeaderBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactRearHeaderBuilder .

HeadImpactRearHeaderDetailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactRearHeaderDetailBuilder .

HeadImpactRearHeaderWizardBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactRearHeaderWizardBuilder .

HeadImpactRPillar - Interface in nxopen.features.vehicledesign

Represents a head impact rear pillar feature.

HeadImpactRPillarBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactRPillarBuilder .

HeadImpactRPillarDetailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactRPillarDetailBuilder .

HeadImpactRPillarWizardBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactRPillarWizardBuilder .

HeadImpactSideRail - Interface in nxopen.features.vehicledesign

Represents a head impact side rail feature.

HeadImpactSideRailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactSideRailBuilder .

HeadImpactSideRailDetailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactSideRailDetailBuilder .

HeadImpactSideRailWizardBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactSideRailWizardBuilder .

HeadImpactUpperRoof - Interface in nxopen.features.vehicledesign

Represents a head impact upper roof feature.

HeadImpactUpperRoofBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactUpperRoofBuilder .

HeadImpactUpperRoofDetailBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactUpperRoofDetailBuilder .

HeadImpactUpperRoofWizardBuilder - Interface in nxopen.features.vehicledesign

Represents a HeadImpactUpperRoofWizardBuilder .

headOrientation() - Method in interface nxopen.cam.LaserCircleCutout

Returns the Head Orientation
License requirements: None.

headOrientation() - Method in interface nxopen.cam.LaserHexagonCutout

Returns the Head Orientation
License requirements: None.

headOrientation() - Method in interface nxopen.cam.LaserLinearMove

Returns the Head Orientation
License requirements: None.

headOrientation() - Method in interface nxopen.cam.LaserProfileMove

Returns the Head Orientation
License requirements: None.

headOrientation() - Method in interface nxopen.cam.LaserRectangleCutout

Returns the Head Orientation
License requirements: None.

headOrientation() - Method in interface nxopen.cam.LaserSlotCutout

Returns the Head Orientation
License requirements: None.

headPoint() - Method in interface nxopen.cae.BoltBuilder

Returns the head point(s)
License requirements: None.

headSelectionType() - Method in interface nxopen.cae.BoltBuilder

Returns the head selection type
License requirements: None.

headSet() - Method in interface nxopen.tooling.EWMultiPositionBuilder

Returns the head sets with specified body and transformation data.

headSpiderDiameter() - Method in interface nxopen.cae.BoltBuilder

Returns the diameter used for creating head spider elements
License requirements: None.

headSpiderScale() - Method in interface nxopen.cae.BoltBuilder

Returns the scale used to determine the head spider diameter relative to the hole diameter
License requirements: None.

headSpiderType() - Method in interface nxopen.cae.BoltBuilder

Returns the option for head spider diameter
License requirements: None.

headSurface() - Method in interface nxopen.cae.BoltBuilder

Returns the selected head surface(s)
License requirements: None.

headType - Variable in class nxopen.uf.UFDraw.ArrowParms

headType - Variable in class nxopen.uf.UFPath.ToolChange

HEADTYPE_FRONT - Static variable in class nxopen.uf.UFPath.HeadType

HEADTYPE_LAST_ELEMENT - Static variable in class nxopen.uf.UFPath.HeadType

HEADTYPE_LEFT - Static variable in class nxopen.uf.UFPath.HeadType

HEADTYPE_NONE - Static variable in class nxopen.uf.UFPath.HeadType

HEADTYPE_REAR - Static variable in class nxopen.uf.UFPath.HeadType

HEADTYPE_RIGHT - Static variable in class nxopen.uf.UFPath.HeadType

HEADTYPE_SADDLE - Static variable in class nxopen.uf.UFPath.HeadType

HEADTYPE_SIDE - Static variable in class nxopen.uf.UFPath.HeadType

heal() - Method in interface nxopen.features.DeleteCurveBuilder

Returns the heal
License requirements: None.

heal() - Method in interface nxopen.features.DeleteFaceBuilder

Returns the flag specifying whether to heal the body while deleting its face.

HEAL - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.Type

HEAL_PATH - Static variable in class nxopen.routing.CustomManager.DesignRuleReason

Called after the Heal Path command.

HEAL_PATH - Static variable in class nxopen.routing.DesignRuleViolationCollection.Reason

healBodies() - Method in interface nxopen.AcisImporter

Returns the heal bodies - if set to true then imported data will be healed
License requirements: None.

healBodies() - Method in interface nxopen.Catiav4Importer

Returns the heal bodies - if set to true then imported data will be healed
License requirements: None.

healBodies() - Method in interface nxopen.DxfdwgImporter

Returns the HealBodies command - if set to true then healing will be attempted on 3D solids
License requirements: None.

healBodies() - Method in interface nxopen.ProeImporter

Returns the heal bodies - if set to true then imported data will be healed
License requirements: None.

healGeometryOnImport() - Method in interface nxopen.preferences.SessionNXGateway

Returns the heal geometry on import flag for I-DEAS import
License requirements: None.

HealMethod - Class in nxopen.routing

Different heal path creation methods.

healMethod - Variable in class nxopen.routing.HealPath.AllData

healOption() - Method in interface nxopen.features.AdmMoveFaceBuilder

Returns the heal option.

HealPath - Interface in nxopen.routing

Represents a HealPath object which holds the data used in the creation of the heal path spline.

HealPath.AllData - Class in nxopen.routing

This class holds the data returned from HealPath.getAllData()

healPlanar() - Method in interface nxopen.features.DeleteFaceBuilder

Returns the flag of finding a plane in which all edges of a hole lie and attach this to a face covering the hole during heal hole process, don't use it until further notification
License requirements: None.

healSolutionCsys() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

Returns the user-defined coordinate system for the PathTransitionBuilder.HealOrientation.NEW_CSYS heal box orientation.

healTraversalOrder() - Method in interface nxopen.mechanicalrouting.PathTransitionBuilder

Returns the heal transition traversal order the path takes to reach the transition end point.

HEAT_CAPACITY - Static variable in class nxopen.cae.Result.Quantity

HEAT_FLOW - Static variable in class nxopen.cae.Result.Quantity

HEAT_FLUX - Static variable in class nxopen.cae.Result.Quantity

HEAT_FLUX - Static variable in class nxopen.cae.XyFunctionMeasure

Heat Flux

HEAT_FLUX_APPLIED - Static variable in class nxopen.cae.Result.Quantity

HEAT_FLUX_BTU_HR_FT2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: Btu/hr-ft^2

HEAT_FLUX_BTU_HR_IN2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: Btu/hr-in^2

HEAT_FLUX_BTU_SEC_FT2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: Btu/sec-ft^2

HEAT_FLUX_BTU_SEC_IN2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: Btu/sec-in^2

HEAT_FLUX_ENTHALPY - Static variable in class nxopen.cae.Result.Quantity

HEAT_FLUX_LBFIN_SEC_IN2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: lbf-in/sec-in^2

HEAT_FLUX_MICROWATT_MM2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: microW/mm^2

HEAT_FLUX_MWATT_MM2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: mW/mm^2

HEAT_FLUX_RADIATIVE_EMITTED - Static variable in class nxopen.cae.Result.Quantity

HEAT_FLUX_RADIATIVE_FLAME - Static variable in class nxopen.cae.Result.Quantity

HEAT_FLUX_RADIATIVE_FLAME_ABSORBED - Static variable in class nxopen.cae.Result.Quantity

HEAT_FLUX_RADIATIVE_FLAME_EMITTED - Static variable in class nxopen.cae.Result.Quantity

HEAT_FLUX_WATT_CM2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: W/cm^2

HEAT_FLUX_WATT_IN2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: W/in^2

HEAT_FLUX_WATT_M2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: W/m^2

HEAT_FLUX_WATT_MM2 - Static variable in class nxopen.cae.XyFunctionUnit

Heat Flux unit: W/mm^2

HEAT_RESIDUAL - Static variable in class nxopen.cae.Result.Quantity

HEAVY - Static variable in class nxopen.preferences.ViewVisualizationSpecialEffects.FogType

Non linear Fog

HEBREW - Static variable in class nxopen.features.TextBuilder.ScriptOptions

Specifies the Hebrew character set

HEDGEHOG - Static variable in class nxopen.geometricanalysis.DistanceAnalysisBuilder.DisplayModes

Display in hedgehog.

HEDGEHOG - Static variable in class nxopen.geometricanalysis.RadiusAnalysisBuilder.DisplayModes

Display in hedgehog.

HEDGEHOG - Static variable in class nxopen.geometricanalysis.SlopeAnalysisBuilder.DisplayModes

HEEL - Static variable in class nxopen.tooling.InsertAuxiliaryBuilder.ShankShapeTypes

heel

heelHeight() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the heel height.

heelLength() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the heel length.

heelOffset() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

Returns the heel offset
License requirements: None.

heelPoint() - Method in interface nxopen.features.shipdesign.CustomBracketBuilder

Returns the heel point
License requirements: None.

heelpost(Heelpost) - Method in interface nxopen.die.DieCollection

Creates a heelpost feature builder HeelpostBuilder .

Heelpost - Interface in nxopen.die

Represents a heelpost feature
To create or edit an instance of this class, use HeelpostBuilder

Created in NX6.0.0

HeelpostBuilder - Interface in nxopen.die

Represents a HeelpostBuilder builder
To create a new instance of this class, use DieCollection.heelpost(nxopen.die.Heelpost)
Default values.

HeelpostBuilder.Types - Class in nxopen.die

Heelpost types

heelRadian() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the heel radius.

heelReferencePoint() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

Returns the driver heel reference point.

heelReferencePoint() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Returns the passenger's heel reference point.

heelReferencePointActive() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

Returns the status to indicate whether the driver heel reference point is active or not.

heelReferencePointActive() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Returns the status to indicate whether the passenger heel reference point is active or not.

heelWidth() - Method in interface nxopen.tooling.InsertAuxiliaryBuilder

Returns the heel width.

height() - Method in interface nxopen.ame.FormSheetBuilder

Returns the height
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.

height() - Method in interface nxopen.annotations.DatumTargetBuilder

Returns the height
License requirements: None.

height() - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder

Returns the foreshortening symbol height
License requirements: None.

height() - Method in interface nxopen.annotations.RegionBuilder

Returns the height Only available when region type is RegionBuilder.Types.RECTANGULAR_REGION
License requirements: None.

height() - Method in interface nxopen.annotations.TargetPointBuilder

Returns the height
License requirements: None.

height() - Method in interface nxopen.annotations.TextComponent

Returns the text height.

height - Variable in class nxopen.assemblies.WaveQuery.PartPreviewData

height of preview image

height - Variable in class nxopen.BasePart.PreviewImageData

image height

height() - Method in interface nxopen.blockstyler.DrawingArea

Returns the Height
License requirements: None.

height() - Method in interface nxopen.blockstyler.ListBox

Returns the Height
License requirements: None.

height() - Method in interface nxopen.blockstyler.MultilineString

Returns the Height
License requirements: None.

height() - Method in interface nxopen.blockstyler.ScrolledWindow

Returns the Height
License requirements: None.

height() - Method in interface nxopen.blockstyler.Tree

Returns the Height
License requirements: None.

height - Variable in class nxopen.cae.BoxBoundingVolume.CsysEdgelengthsData

height() - Method in interface nxopen.cae.connections.IHeight

Returns the height value
License requirements: None.

height() - Method in interface nxopen.cam.NcmHoleMachiningEngRet

Returns the engage/retract height builder
License requirements: None.

height() - Method in interface nxopen.cam.ThreadedBossSet

Returns the Height
License requirements: None.

height - Variable in class nxopen.diagramming.SheetBuilder.SizeData

height() - Method in interface nxopen.diagramming.SheetElementBuilder

Returns the height.

height - Variable in class nxopen.diagramming.tables.SizedSymbol

The symbol height

height() - Method in interface nxopen.die.HandlingCoreBuilder

Returns the expression containing the value to use for the height of the core.

height() - Method in interface nxopen.die.HandlingCoreChildBuilder

Returns the height of the handling core.

height() - Method in interface nxopen.die.HandlingCoreParentBuilder

Returns the height of handling cores.

height() - Method in interface nxopen.die.HeelpostBuilder

Returns the height from the selected base orientation to the origin of the pad orientation, if the pad orientation is not specified.

height() - Method in interface nxopen.die.PadChildBuilder

Returns the height of the die pad.

height() - Method in interface nxopen.die.PadParentBuilder

Returns the height of die pads.

height() - Method in interface nxopen.die.PressureSystemChildBuilder

Returns the height of the pressure system.

height() - Method in interface nxopen.die.PressureSystemParentBuilder

Returns the height of pressure systems.

height() - Method in interface nxopen.die.RibChildBuilder

Returns the height of the die rib.

height() - Method in interface nxopen.die.RibParentBuilder

Returns the height of die ribs.

height() - Method in interface nxopen.display.ImageBaseBuilder

Returns the height of the image as an Expression .

height() - Method in interface nxopen.drawings.DrawingRegionBuilder

Returns the height
License requirements: None.

height() - Method in interface nxopen.drawings.DrawingSheet

Returns the height of the drawing sheet.

height() - Method in interface nxopen.drawings.DrawingSheetBuilder

Returns the custom or standard height for the drawing sheet
License requirements: None.

height() - Method in interface nxopen.features.AeroRibBuilder

Returns the height
License requirements: None.

height() - Method in interface nxopen.features.BlockFeatureBuilder

Returns the expression representing the block height.

height() - Method in interface nxopen.features.ConeBuilder

Returns the height
License requirements: None.

height() - Method in interface nxopen.features.CylinderBuilder

Returns the height
License requirements: None.

height() - Method in interface nxopen.features.OvercrownBuilder

Returns the maximum height of deformation.

height() - Method in interface nxopen.features.RasterImage

Returns the height of the image, given in part units (mm or in)
License requirements: None.

height() - Method in interface nxopen.features.sheetmetal.BeadBuilder

Returns the height of the bead.

height() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder

Returns the height expression
License requirements: None.

height() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

Returns the height expression
License requirements: None.

height() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the height expression
License requirements: None.

height() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionPrimitiveShapeBuilderEx instead.

height() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

Returns the height.

height() - Method in interface nxopen.geometricutilities.FrameOnPathBuilder

Returns the height
License requirements: None.

height() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder

Returns the height
License requirements: None.

height() - Method in interface nxopen.mechatronics.CollisionShapeBuilder

Returns the height.

height - Variable in class nxopen.report.ReportManager.OriginalImageDimensionData

height() - Method in interface nxopen.routing.electrical.ElectricalStockDefinition

Returns the height of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

height - Variable in class nxopen.routing.PathStockBuilder.RectangularDimensionsData

height() - Method in interface nxopen.tooling.GeneralInsertBuilder

Returns the height
License requirements: None.

height() - Method in interface nxopen.tooling.ShimBuilder

Returns the height of shim body
License requirements: None.

height - Variable in class nxopen.uf.UFDrf.AskAnnotationTextBoxData

height - Variable in class nxopen.uf.UFDrf.DraftAidTextInfo

height - Variable in class nxopen.uf.UFDrf.ImageData

height - Variable in class nxopen.uf.UFDrf.SymbolCreateData

height - Variable in class nxopen.uf.UFDrf.SymbolData

height - Variable in class nxopen.uf.UFDrf.UdSymbolFontInfo

height - Variable in class nxopen.uf.UFGdt.TargetRectArea

height - Variable in class nxopen.uf.UFModlFeatures.AskBossParmsData

height - Variable in class nxopen.uf.UFModlFeatures.AskConeParmsData

height - Variable in class nxopen.uf.UFModlFeatures.AskCylinderParmsData

height - Variable in class nxopen.uf.UFModlGeneral.AskPrismParmsData

height - Variable in class nxopen.uf.UFUgfont.FontHeader

height() - Method in interface nxopen.weld.EasyPatternBuilder

Returns the height of the measurement solid to create.

heightAboveFeature() - Method in interface nxopen.cam.InspectionPathBuilder

Returns the height above feature for entry and exit points
License requirements: None.

heightBuilder() - Method in interface nxopen.cam.NcmEngRetBuilder

Returns the engage/retract height builder
License requirements: None.

heightBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

Returns the engage/retract height builder
License requirements: None.

heightBuilder() - Method in interface nxopen.cam.NcmScEngRetBuilder

Returns the engage/retract height builder
License requirements: None.

heightDefinedBy() - Method in interface nxopen.cae.MeshControlBuilder

Returns the height defined by option
License requirements: nx_masterfem ("Finite Element Modeling")
.

heightDimensionType() - Method in interface nxopen.features.AeroRibBuilder

Returns the height dimension type
License requirements: None.

heightDir - Variable in class nxopen.uf.UFDrf.ImageData

heightFrom() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

Returns the height from which engage helical/ramp/plunge is measured
License requirements: None.

heightOffset() - Method in interface nxopen.features.AeroRibBuilder

Returns the height offset
License requirements: None.

heightOffset() - Method in interface nxopen.features.OffsetEmbossBuilder

Returns the height offset: Distance to offset the input sheet to create the pad.

heightOrAspectRatio - Variable in class nxopen.annotations.SimpleDraftingAid.UserSymbolSizeData

heightOrAspectRatio - Variable in class nxopen.annotations.UserSymbolPreferences.SizeData

Height or aspect ratio

heightOrAspectRatio - Variable in class nxopen.uf.UFDrf.UdsSize

heightPercent - Variable in class nxopen.uf.UFSfLegend.IndexAttr

heightPolicy() - Method in interface nxopen.diagramming.SheetElementBuilder

Returns the height policy.

heightScale() - Method in interface nxopen.display.DecalBuilder

Returns the decal height scale
License requirements: None.

heightSide() - Method in interface nxopen.features.sheetmetal.BeadBuilder

Returns the Height side for the bead.

heightStep() - Method in interface nxopen.tooling.BlankNestingBuilder

Returns the distance increment to use when translating the blank in the vertical direction during the processing to find the best layout.

heightType() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

Returns the height enum
License requirements: None.

HeightType - Class in nxopen.cae.connections

Types of height definitions

heightType() - Method in interface nxopen.cae.connections.IHeight

Returns the height type
License requirements: None.

heightValue() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder

Returns the height value
License requirements: None.

heightValue() - Method in interface nxopen.tooling.FormingInsertBuilder

Returns the height value of blank.

heightZ() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder

Deprecated.

Deprecated in NX11.0.0. Use SubdivisionPrimitiveShapeBuilderEx instead.

heightZ() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx

Returns the height in Z direction.

heightZ() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder

Returns the expression that contains the value which indicates the height Z of the wheel fixing when the shape is block.

HELICAL - Static variable in class nxopen.cam.CamPathMotionShapeType

HELICAL - Static variable in class nxopen.cam.CutPatternBuilder.Types

Helical

HELICAL - Static variable in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes

Helical

HELICAL - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutPatternType

Retract

HELICAL - Static variable in class nxopen.cam.NcmHoleMachiningEngRet.EngRetTypes

Helical

HELICAL - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes

Helical Ramp

HELICAL_AND_SPIRAL - Static variable in class nxopen.cam.CylinderMillingBuilder.CutPatternTypes

Helical/Spiral

HELICAL_AROUND_PART - Static variable in class nxopen.cam.CutPatternBuilder.Types

Helical Around Part

HELICAL_CCLW - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes

Helical Counter Clockwise

HELICAL_CCW - Static variable in class nxopen.cam.CamOperationMotionShapeType

HELICAL_CLW - Static variable in class nxopen.cam.NcmScEngRetBuilder.EngRetTypes

Helical Clockwise

HELICAL_CW - Static variable in class nxopen.cam.CamOperationMotionShapeType

HELICAL_GEAR_TYPE - Static variable in class nxopen.uf.UFPd.AttributeType

HELICAL_SCAN - Static variable in class nxopen.cam.InspectionMethodBuilder.OperationTypes

Scan Helix

HELICAL_SPIRAL - Static variable in class nxopen.cam.CutPatternBuilder.Types

Helical or Spiral

helicalDiameter() - Method in interface nxopen.cam.MillingToolBuilder

Returns the helical diameter
License requirements: None.

HelicalMotion() - Constructor for class nxopen.uf.UFPath.HelicalMotion

HelicalMotion(double[], double[], double[], double[], double[], double[], double, double, double, double, UFPath.FeedUnit, UFPath.MotionType, UFPath.Side, UFPath.Shape) - Constructor for class nxopen.uf.UFPath.HelicalMotion

helicalRampAngle() - Method in interface nxopen.cam.MillingToolBuilder

Returns the ramp angle
License requirements: None.

helicalRampAngle() - Method in interface nxopen.cam.NcmScEngRetBuilder

Deprecated.

Deprecated in NX8.0.0. Use NcmScEngRetBuilder.helicalRampAngleBuilder() instead.

helicalRampAngleBuilder() - Method in interface nxopen.cam.NcmPlanarEngRetBuilder

Returns the helical ramp angle builder of Helical and Ramp on Shape type of Engages
License requirements: None.

helicalRampAngleBuilder() - Method in interface nxopen.cam.NcmScEngRetBuilder

Returns the helical ramp angle builder
License requirements: None.

HELICOIL - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes

Helicoil

HELICOIL - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form

Form: Helicoil

HELICOIL - Static variable in class nxopen.cam.HoleBossGeom.FormTypes

Form: Helicoil

Helix - Interface in nxopen.features

Represents a helix feature
To create or edit an instance of this class, use HelixBuilder

Created in NX8.5.0

HELIX - Static variable in class nxopen.geometricutilities.PatternDefinition.PatternEnum

helix pattern.

HelixBuilder - Interface in nxopen.features

Represents a Helix builder
To create a new instance of this class, use FeatureCollection.createHelixBuilder(nxopen.features.Helix)
Default values.

HelixBuilder.LengthMethods - Class in nxopen.features

Method for defining the length

HelixBuilder.OrientationOptions - Class in nxopen.features

Orientation options for along spine type

HelixBuilder.SizeOptions - Class in nxopen.features

Option indicating how size is defined

HelixBuilder.TurnDirections - Class in nxopen.features

Option indicating direction of the turn

HelixBuilder.Types - Class in nxopen.features

Type of helix

helixDefinition() - Method in interface nxopen.geometricutilities.PatternDefinition

Returns the helix definition.

helixDiameter() - Method in interface nxopen.cam.CylinderMillingBuilder

Returns the Helix Diamter
License requirements: None.

helixOrientationOption() - Method in interface nxopen.geometricutilities.PatternOrientation

Returns the orientationOption for Helix pattern type
License requirements: None.

HelixPattern - Interface in nxopen.geometricutilities

the Helix pattern definition.

HelixPattern.DirectionTypes - Class in nxopen.geometricutilities

This defines helix direction method

HelixPattern.SizeOptions - Class in nxopen.geometricutilities

defines Helix size options for Helix type pattern.

helixPitch() - Method in interface nxopen.geometricutilities.HelixPattern

Returns the helix pitch expression for the Helix type pattern
License requirements: None.

helixSpan() - Method in interface nxopen.geometricutilities.HelixPattern

Returns the helix span expression for the Helix type pattern
License requirements: None.

HELP - Static variable in class nxopen.Selection.DialogResponse

User selected Help

help() - Method in interface nxopen.tooling.StandardPartBuilder

Ask help of the selected standard part component.

help() - Method in interface nxopen.UFSession

HELP - Static variable in class nxopen.uistyler.DialogResponse

Help button was selected.

HELP_DATA_NONE - Static variable in class nxopen.uf.UFCurve.HelpDataType

HELP_DATA_PARAMETER - Static variable in class nxopen.uf.UFCurve.HelpDataType

HELP_DATA_VALUE - Static variable in class nxopen.uf.UFCurve.HelpDataType

HelpData() - Constructor for class nxopen.ISketchHelpedConstraint.HelpData

helpData - Variable in class nxopen.uf.UFCurve.Constraint

HelpData() - Constructor for class nxopen.uf.UFCurve.HelpData

HelpData(UFCurve.HelpDataType, double[], double) - Constructor for class nxopen.uf.UFCurve.HelpData

helpData - Variable in class nxopen.uf.UFCurve.Limit

helpDataType - Variable in class nxopen.uf.UFCurve.HelpData

helpLineStyle() - Method in interface nxopen.cae.xyplot.ProbingStyle

Returns the help line display style.

helpParameter - Variable in class nxopen.uf.UFSket.ConGeom

helpParameter1 - Variable in class nxopen.ISketchHelpedConstraint.HelpData

The first help parameter.

helpParameter2 - Variable in class nxopen.ISketchHelpedConstraint.HelpData

The second help parameter.

helpPoint() - Method in interface nxopen.features.FaceBlendBuilder

Returns the face blend help point
License requirements: None.

helpPoint() - Method in interface nxopen.features.SphericalCornerBuilder

Returns the Help point acquired from the first face set selection
License requirements: None.

helpPoint() - Method in interface nxopen.positioning.ConstraintReference

Returns the help point of the constraint reference.

helpPoint - Variable in class nxopen.Sketch.DimensionGeometry

help point

helpPoint() - Method in interface nxopen.SketchChamferBuilder

Returns the coordinates of the help point for Chamfer creation
License requirements: drafting ("DRAFTING") OR solid_modeling ("SOLIDS MODELING") OR geometric_tol ("GDT")
.

helpPoint - Variable in class nxopen.uf.UFModl.BlendFacesLimitData

helpPoint - Variable in class nxopen.uf.UFSket.ConGeom

helpPoint1 - Variable in class nxopen.ISketchHelpedConstraint.HelpData

The first help point.

helpPoint2 - Variable in class nxopen.ISketchHelpedConstraint.HelpData

The second help point.

helpString - Variable in class nxopen.uf.UFAssem.DeformedDefinitionData

helpUrlString - Variable in class nxopen.uf.UFAssem.DeformData

HEM - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.PanelTypes

type hem

HEM_AND_SURFACE - Static variable in class nxopen.weld.EasyPatternBuilder.Types

Hem vector and surface vectors.

HEM_VECTOR - Static variable in class nxopen.uf.UFConstants

HemFixerBuilder - Interface in nxopen.tooling

Hem Fixer Builder of PDW and EDW.

HemFlange - Interface in nxopen.features

Represents a hem flange feature
To create or edit an instance of this class, use HemFlangeBuilder

Created in NX5.0.0

HemFlangeBuilder - Interface in nxopen.features.sheetmetal

Represents a HemFlange builder
To create a new instance of this class, use SheetmetalManager.createHemFlangeFeatureBuilder(nxopen.features.Feature)

Created in NX5.0.0

HemFlangeBuilder.BendReliefOptions - Class in nxopen.features.sheetmetal

This enum represents the Bend relief type of the hem flange.

HemFlangeBuilder.InsetTypeOptions - Class in nxopen.features.sheetmetal

This enum represents the inset type for the material of the hem flange.

HemFlangeBuilder.TypeOptions - Class in nxopen.features.sheetmetal

Represents the Hem Flange type.

HEMI_DOME - Static variable in class nxopen.display.Background.Type

an 3D HDR image displayed in the background

hemMethod() - Method in interface nxopen.weld.EasyPatternBuilder

Returns the hem method.

HEX - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes

Hex

HEX - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType

Deprecated.

HEX - Static variable in class nxopen.cae.ElementTypes.Shape

Hexagonal

HEX - Static variable in class nxopen.preferences.RoutingMechanical.LineColorType

HEX20 - Static variable in class nxopen.uf.UFSf.ElementType

HEX8 - Static variable in class nxopen.uf.UFSf.ElementType

HEXA - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType

Hexa

HEXAGON - Static variable in class nxopen.annotations.IdSymbolBuilder.SymbolTypes

Hexagon

HEXAGON - Static variable in class nxopen.annotations.PartsListBuilder.PartsListSymbolType

HEXAGON - Static variable in class nxopen.cam.TurnToolBuilder.InsertShapes

Insert shape: Hexagon

HEXAGON - Static variable in class nxopen.drawings.DrawingCompareSettingsBuilder.ChangeSymbolType

Deprecated.

HEXAGON - Static variable in class nxopen.drawings.TrackDrawingChangesGeneralBuilder.SymbolType

HEXAGONAL - Static variable in class nxopen.die.PierceItemBuilder.HoleShapeType

Hexagonal shaped hole

HEXAGONAL - Static variable in class nxopen.tooling.DieDesPierceInsertBuilder.HoleShapeTypes

HEXAGONAL - Static variable in class nxopen.tooling.RunnerBuilder.SectionType

Use hexagonal section type.

HEXCOHES20 - Static variable in class nxopen.uf.UFSf.ElementType

HEXCOHES8 - Static variable in class nxopen.uf.UFSf.ElementType

HHMM12 - Static variable in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes

12 hh:mm AM/PM

HHMM24 - Static variable in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes

24 hh:mm

HHMMSS12 - Static variable in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes

12 hh:mm:ss AM/PM

HHMMSS24 - Static variable in class nxopen.annotations.TableCellStyleBuilder.TimeFormatTypes

24 hh:mm:ss

HIDDEN - Static variable in class nxopen.ame.LineDesignerMappingBuilder.FilterType

HIDDEN - Static variable in class nxopen.annotations.PartsListBuilder.PartsListShowLockedDeletedRows

HIDDEN - Static variable in class nxopen.annotations.TableCellStyleBuilder.CellFormatTypes

Hidden

HIDDEN - Static variable in class nxopen.annotations.TableCellStyleBuilder.FormatType

Deprecated.

hidden() - Method in interface nxopen.assemblies.AssembliesGeneralPropertiesBuilder

Returns the hidden option.

HIDDEN - Static variable in class nxopen.cae.xyplot.BarColorOption

Background color as fill

HIDDEN - Static variable in class nxopen.cae.xyplot.PlateColorOption

Background color as fill

HIDDEN - Static variable in class nxopen.cae.xyplot.SurfaceColorOption

Background color as fill

hidden() - Method in interface nxopen.diagramming.tables.CellRangeBuilder

Returns the hidden flag.

HIDDEN - Static variable in class nxopen.drawings.ShipbuildingLinesViewStyle.Lines

Hidden

HIDDEN - Static variable in class nxopen.features.subdivision.DefineWorkRegionBuilder.FrozenRegionDefinitionMethods

Do not display the frozen region

HIDDEN - Static variable in class nxopen.layer.State

Objects on the layer are not visible and not selectable

hidden - Variable in class nxopen.preferences.RoutingPartLibrary.Column

Whether or not the column is used for selection in the specify item dialog.

HIDDEN - Static variable in class nxopen.preferences.RoutingPartLibrary.ColumnStatus

Column is not displayed in Specify Item.

HIDDEN - Static variable in class nxopen.preferences.ShipbuildingLinesViewPreferences.Lines

Hidden

HIDDEN - Static variable in class nxopen.routing.RouteManager.ColumnStatus

Column is not displayed in Specify Item.

HIDDEN_COLOR - Static variable in class nxopen.preferences.PartVisualizationShade.HiddenShadedFaceEdges

If any color is selected, hidden shaded face edges are displayed in that color.

HIDDEN_EDGE_STYLE_DASHED_IN_BODY_COLOR - Static variable in class nxopen.uf.UFView.HiddenEdgeStyle

HIDDEN_EDGE_STYLE_HIDDEN_GEOMETRY_COLOR - Static variable in class nxopen.uf.UFView.HiddenEdgeStyle

HIDDEN_EDGE_STYLE_INVISIBLE - Static variable in class nxopen.uf.UFView.HiddenEdgeStyle

HIDDEN_GEOMETRY_COLOR - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgeStyleType

HIDDEN_LINE_REMOVAL_OFF - Static variable in class nxopen.uf.UFDraw.HiddenLine

HIDDEN_LINE_REMOVAL_ON - Static variable in class nxopen.uf.UFDraw.HiddenLine

HIDDEN_NONSECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines

Hidden, NonSection

HIDDEN_NONSECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines

Hidden, NonSection

HIDDEN_SECTION - Static variable in class nxopen.drawings.ShipDraftingViewLinesViewStyle.Lines

Hidden, Section

HIDDEN_SECTION - Static variable in class nxopen.preferences.ShipDraftingViewLinesViewPreferences.Lines

Hidden, Section

HIDDEN_SURFACE - Static variable in class nxopen.preferences.ViewVisualizationVisual.HiddenEdgesType

Deprecated.

Faceted display of all existing and subsequently created bodies in the selected view

HIDDEN_VALUE - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus

The parameter has value, but it should be hidden to user

HIDDEN_VALUE - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status

The parameter has value, but it should be hidden to user

HIDDEN_WIREFRAME - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Style

HIDDEN_WIREFRAME - Static variable in class nxopen.preferences.PartDrafting.ViewStyleType

Hidden Wireframe

hiddenCFW() - Method in interface nxopen.drawings.VisibleAndHiddenLinesColorFontWidthBuilder

Returns the hidden lines color, font, and width.

hiddenColor() - Method in interface nxopen.drawings.TraceLinesViewStyle

Returns the hidden color.

hiddenColor() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

Returns the hidden line color on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.

hiddenColor() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

Returns the hidden color on the TRACE LINES tab of the View Style Dialog
License requirements: None.

hiddenColor() - Method in interface nxopen.preferences.TraceLinesViewPreferences

Returns the hidden color.

hiddenEdgeMode - Variable in class nxopen.uf.UFView.EdgeDisplayOptions

hiddenEdgeMode - Variable in class nxopen.uf.UFView.Visualization

hiddenEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.DisplayAppearanceOptions

Appearance of hidden edges

hiddenEdges - Variable in class nxopen.preferences.ViewVisualizationVisual.SurfaceDisplayOptions

Deprecated.

Appearance of hidden edges

hiddenEdgeStyle() - Method in interface nxopen.preferences.ViewVisualizationVisual

Returns the hidden edge display style for shaded faces in the view.

hiddenEdgeStyle - Variable in class nxopen.uf.UFView.ShadedEdgeOptions

hiddenEdgesType - Variable in class nxopen.preferences.ViewVisualizationVisual.TrueSurfaceDisplayPref

Deprecated.

Hidden Edge Type

hiddenFont() - Method in interface nxopen.drawings.TraceLinesViewStyle

Returns the hidden font
License requirements: None.

hiddenFont() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

Returns the hidden line font on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.

hiddenFont() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

Returns the hidden font on the TRACE LINES tab of the View Style Dialog
License requirements: None.

hiddenFont() - Method in interface nxopen.preferences.TraceLinesViewPreferences

Returns the hidden font
License requirements: None.

hiddenGeometryColor() - Method in interface nxopen.preferences.PartVisualizationColorSetting

Returns the color of hidden geometry.

hiddenGeometryColor() - Method in interface nxopen.preferences.PartVisualizationShade

Returns the shade hidden geometry color.

hiddenGeometryColor - Variable in class nxopen.uf.UFDisp.SystemParams

hiddenLensFlareToggle() - Method in interface nxopen.display.CameraBuilder

Returns the hidden lens flare toggle
License requirements: None.

hiddenline() - Method in interface nxopen.drawings.HiddenLinesViewStyle

Returns the status of hiddenline.

hiddenLine() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder

Returns the hidden line toggle on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.

hiddenline() - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Returns the status of hiddenline.

hiddenLine - Variable in class nxopen.uf.UFDraw.RenderPrefs

hiddenLine - Variable in class nxopen.uf.UFDraw.ViewPrfs

hiddenlineColor() - Method in interface nxopen.drawings.HiddenLinesViewStyle

Returns the color of hiddenline.

hiddenLineColor() - Method in interface nxopen.drawings.ViewCreationWizardBuilder

Returns the hidden line color
License requirements: None.

hiddenlineColor() - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Returns the color of hidden line.

hiddenLineColor - Variable in class nxopen.uf.UFDraw.RenderPrefs

hiddenLineColor - Variable in class nxopen.uf.UFDraw.ViewPrfs

hiddenLineColorFontWidth() - Method in interface nxopen.drawings.AutomationBookletBuilder

Returns the hidden line color font width
License requirements: None.

hiddenlineFont() - Method in interface nxopen.drawings.HiddenLinesViewStyle

Returns the font of hiddenline
License requirements: None.

hiddenLineFont() - Method in interface nxopen.drawings.ViewCreationWizardBuilder

Returns the hidden line font
License requirements: None.

hiddenlineFont() - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Returns the font type of hidden line.

hiddenLineFont - Variable in class nxopen.uf.UFDraw.RenderPrefs

hiddenLineFont - Variable in class nxopen.uf.UFDraw.ViewPrfs

hiddenLineHatching() - Method in interface nxopen.drawings.SectionViewStyle

Returns the status of hidden line hatching.

hiddenLineHatching() - Method in interface nxopen.drawings.ViewStyleSectionBuilder

Returns the hidden line hatching toggle on the SECTION tab of the View Style Dialog
License requirements: None.

hiddenLineHatching() - Method in interface nxopen.preferences.SectionViewPreferences

Returns the status of hidden line hatching.

hiddenLineHatching - Variable in class nxopen.uf.UFDraw.BreakoutData

HiddenLineInterferingSolidsOption - Class in nxopen.preferences

Represents the Interfering Solids options

hiddenLines() - Method in interface nxopen.drawings.ViewCreationWizardBuilder

Returns the hidden lines
License requirements: None.

hiddenLines() - Method in interface nxopen.drawings.ViewStyle

Returns object for doing View style settings applicable to HiddenLines .

hiddenLines() - Method in interface nxopen.preferences.ViewPreferences

Returns object for doing View Preferences settings applicable to HiddenLines .

hiddenLinesColor() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the hidden lines color
License requirements: None.

hiddenLinesFont() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the hidden lines font
License requirements: None.

HiddenLineSmallFeatureOption - Class in nxopen.preferences

Represents the small feature options

HiddenLinesViewPreferences - Interface in nxopen.preferences

Represents set of Hidden Lines View Preferences applicable to drafting views.

HiddenLinesViewStyle - Interface in nxopen.drawings

Represents set of Hidden Lines View Style Preferences applicable to drafting views.

hiddenLinesWidth() - Method in interface nxopen.drawings.CustomViewSettingsBuilder

Returns the hidden line hidden font
License requirements: None.

hiddenlineWidth() - Method in interface nxopen.drawings.HiddenLinesViewStyle

Returns the width of hiddenline
License requirements: None.

hiddenLineWidth() - Method in interface nxopen.drawings.ViewCreationWizardBuilder

Returns the hidden line width
License requirements: None.

hiddenlineWidth() - Method in interface nxopen.preferences.HiddenLinesViewPreferences

Returns the width of hidden line or edges.

hiddenLineWidth - Variable in class nxopen.uf.UFDraw.RenderPrefs

hiddenLineWidth - Variable in class nxopen.uf.UFDraw.ViewPrfs

hiddenObjects() - Method in interface nxopen.drawings.BaseViewBuilder

Returns the list of objects to not show in the view
License requirements: None.

hiddenObjects() - Method in interface nxopen.drawings.DetailViewBuilder

Returns the list of objects to not show in the view
License requirements: None.

hiddenObjects() - Method in interface nxopen.drawings.ProjectedViewBuilder

Returns the list of objects to not show in the view
License requirements: None.

hiddenObjects() - Method in interface nxopen.drawings.SectionViewBuilder

Returns the hidden objects
License requirements: None.

hiddenObjects() - Method in interface nxopen.drawings.StandardViewsBuilder

Returns the list of objects to not show in the view
License requirements: None.

hiddenObjects() - Method in interface nxopen.features.shipdesign.SectionViewBuilder

Deprecated.

Deprecated in NX11.0.0. Use ShipStructureBuilder .HiddenObjects() instead.

hiddenObjects() - Method in interface nxopen.features.shipdesign.ShipStructureBuilder

Returns the hidden object list.

HiddenObjectsBuilder - Interface in nxopen.drawings

This builder allows the user to select a view in which component objects can be designated as hidden or shown .

hiddenShadedFaceEdges - Variable in class nxopen.uf.UFDisp.SystemParams

hiddenWidth() - Method in interface nxopen.drawings.TraceLinesViewStyle

Returns the hidden width
License requirements: None.

hiddenWidth() - Method in interface nxopen.drawings.ViewStyleShipbuildingLinesBuilder

Returns the hidden line width on the SHIPBUILDING LINES tab of the View Style Dialog
License requirements: None.

hiddenWidth() - Method in interface nxopen.drawings.ViewStyleTraceLinesBuilder

Returns the hidden width on the TRACE LINES tab of the View Style Dialog
License requirements: None.

hiddenWidth() - Method in interface nxopen.preferences.TraceLinesViewPreferences

Returns the hidden width
License requirements: None.

hiddenWireframeColor() - Method in interface nxopen.drawings.ViewStyleShadingBuilder

Returns the hidden wireframe color on the SHADING tab of the View Style Dialog
License requirements: None.

hide(NXObject) - Method in interface nxopen.ame.LineDesignerMappingBuilder

Hide a ld object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.

hide(View) - Method in interface nxopen.assemblies.Explosion

Changes the view so that it no longer shows an exploded view.

HIDE - Static variable in class nxopen.cae.Post.GroupVisibility

HIDE - Static variable in class nxopen.cae.PostShowhideBuilder.Vis

HIDE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Features

HIDE - Static variable in class nxopen.facet.BridgeFacetBodyBuilder.Input

Hide the input facet body after builder committing

HIDE - Static variable in class nxopen.facet.CleanupFacetBodyBuilder.OriginalBodyOptions

Hide original body

HIDE - Static variable in class nxopen.facet.ConvertFacetBodyBuilder.OriginalBodyOptions

Hide original body

HIDE - Static variable in class nxopen.facet.FacetBodyFromBodyBuilder.OriginalBodyOptions

Hide original body

HIDE - Static variable in class nxopen.facet.MergeFacetBodyBuilder.Input

Hide the input facet body after builder committing

HIDE - Static variable in class nxopen.facet.SewFacetBodyBuilder.Input

Hide the input facet body after builder committing

HIDE - Static variable in class nxopen.features.shipdesign.FeaturesBatchOperationBuilder.Types

HIDE - Static variable in class nxopen.features.StudioSplineBuilderEx.InputCurveOptions

Hide original curve

HIDE - Static variable in class nxopen.features.subdivision.ExtractCagePolylineBuilder.InputCurveOption

Hide input curves

HIDE - Static variable in class nxopen.features.subdivision.MergeSubdivisionBodiesBuilder.InputBodyOptions

Hide the features

HIDE - Static variable in class nxopen.features.subdivision.SplitSubdivisionBodyBuilder.InputBodyOptions

Hide the features

HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.DepDispTypeEnum

HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.IndepDomDispType

HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.LegendPos

HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ScalarType

HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TblPointTypeEnum

HIDE - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ValuesEnum

HIDE - Static variable in class nxopen.preferences.HiddenLineSmallFeatureOption

Hide

hide() - Method in interface nxopen.shipdesign.Navigator

Hides a navigator.

hide(boolean) - Method in interface nxopen.shipdesign.Navigator

Hides a navigator.

HIDE - Static variable in class nxopen.tooling.AssemblyDrawingBuilder.AttributeValues

HIDE - Static variable in class nxopen.tooling.BlendCurve3DBuilder.InputCurvesOption

Hide input curves

HIDE - Static variable in class nxopen.tooling.BomBuilder.TreeList

A list includes hidden components

HIDE - Static variable in class nxopen.tooling.QuickQuotationBuilder.ManageTemporaryObjectsTypes

HIDE_ALL - Static variable in class nxopen.display.PlanarShipGridBuilder.LabelDisplayOption

Hide label for all grid lines

HIDE_COMPONENTS_WITH_ATTRIBUTE - Static variable in class nxopen.tooling.ObjectAttributeManagementBuilder.ShowComponentsType

HIDE_LIST - Static variable in class nxopen.tooling.BomListBuilder.BomListTypes

A list includes hidden components

HIDE_ONLY - Static variable in class nxopen.View.ShowOrHideType

HIDE_STATUS - Static variable in class nxopen.tooling.SpreadsheetData.ParameterStatus

Not shown in UI

HIDE_STATUS - Static variable in class nxopen.tooling.SpreadsheetDataParameter.Status

Not shown in UI

HIDE_TEXT - Static variable in class nxopen.annotations.HoleTableSettingsFormatBuilder.DeletedHolesDisplayType

HideText

hideBlankGeometry() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the hide blank geometry
License requirements: None.

hideBody() - Method in interface nxopen.features.Feature

Hide the body created by the feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

hideBodyOption() - Method in interface nxopen.features.MidSurfaceByFacePairsBuilder

Returns the hide solid body option
License requirements: None.

hideByType(DisplayManager.ShowHideType, DisplayManager.ShowHideScope) - Method in interface nxopen.DisplayManager

Deprecated.

Deprecated in NX9.0.0. Use DisplayManager.hideByType(nxopen.DisplayManager.ShowHideType, nxopen.DisplayManager.ShowHideScope) that takes a string type instead. To find all registered ShowHideType string use DisplayManager.getShowableHideableTypes()

hideByType(String, DisplayManager.ShowHideScope) - Method in interface nxopen.DisplayManager

Hides a set of objects by type.

hideCollaborativeDesignPreview() - Method in interface nxopen.assemblies.Subset

Hides the preview for the Collaborative Design in the graphics window if it was already displayed.

hideComponent(Tag, Tag) - Method in interface nxopen.uf.UFAssem

Refer to UF_ASSEM_hide_component for documentation.

HideComponentBuilder - Interface in nxopen.assemblies

Represents a HideComponentBuilder
To create a new instance of this class, use AssemblyManager.createHideComponentBuilder()

Created in NX6.0.0

hideComponents(NXObject[]) - Method in interface nxopen.drawings.DraftingView

Hides the specified components in the view.

hideComponentsInIsolateView(Component[]) - Method in interface nxopen.assemblies.ComponentAssembly

Hides array of components in Isolate view View .

HideComponentsInIsolateViewData() - Constructor for class nxopen.assemblies.ComponentAssembly.HideComponentsInIsolateViewData

hideConstructionProcess() - Method in interface nxopen.features.shipdesign.RollingLineBuilder

Returns the value specifying if the construction process should be hidden.

hideContents() - Method in interface nxopen.cae.SelectionRecipe

Hide the contents of the Selection Recipe.

hideCsys() - Method in interface nxopen.tooling.EWDraftingBuilder

Returns the option to hide the datum CSYS in the drawing sheet.

hideDimensions(DisplayableObject[]) - Method in interface nxopen.Sketch

Blanks dimensions in the active sketch associated with the input sketch geometry.

hideDimensions() - Method in interface nxopen.Sketch

Blanks all the dimensions of input sketch
License requirements: solid_modeling ("SOLIDS MODELING") OR drafting ("DRAFTING") OR geometric_tol ("GDT")
.

hideDimensions(Sketch.ConstraintGeometry[]) - Method in interface nxopen.Sketch

Blanks dimensions in the active sketch associated with the input sketch geometry.

hideEntry(ContextMenuEntry) - Method in interface nxopen.menubar.ContextMenu

Prevents the indicated menu entry from being shown on the menu.

hideFeetAndInchMarks() - Method in interface nxopen.drafting.AutomationRuleBuilder

Returns the hide feet and inch marks option Show/Hide feet and inch marks.

hideFeetInchMark() - Method in interface nxopen.drafting.AutomationPreferencesBuilder

Returns the hide feet inch mark
License requirements: None.

hideFormboardConstraints() - Method in interface nxopen.formboard.FormboardManager

Hides the formboard constraints.

hideGroup() - Method in interface nxopen.cae.CaeGroup

Hide this group.

hideInputMeshes(boolean) - Method in interface nxopen.cae.modelcheck.ElementEdgeCheckBuilder

Hides or unhides the input meshes
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

hideInternalParentFeatureAfterEdit(Feature) - Method in interface nxopen.features.FeatureBuilder

Re-suppress an internal parent feature (a slave feature) after it has been edited.

hideMarksBelow - Variable in class nxopen.cae.Post.Mark

hideMotionItem() - Method in interface nxopen.tooling.MotionSimulationBuilder

Returns the hide motion item toggle, which specifies whether to remove the motion item from the tree list if there is no mounted component in it
License requirements: None.

hideOriginal() - Method in interface nxopen.features.CompositeCurveBuilder

Returns the hide original
License requirements: None.

hideOriginal() - Method in interface nxopen.features.ExtractFaceBuilder

Returns the option to specify if the original faces should be hidden
License requirements: None.

hideOriginal() - Method in interface nxopen.features.FreeTransformerBuilder

Returns the option to hide the original geometries after creating new geometries
License requirements: None.

hideOriginal() - Method in interface nxopen.features.GeomcopyBuilder

Returns the hide original
License requirements: None.

hideOriginal() - Method in interface nxopen.features.MeshTransformerBuilder

Returns the option to hide the original geometries after creating new geometries
License requirements: None.

hideOriginal() - Method in interface nxopen.features.PatternGeometryBuilder

Returns the hide original option.

hideOriginal() - Method in interface nxopen.features.sheetmetal.CleanUpUtilityBuilder

Returns the hide original
License requirements: None.

hideOriginal() - Method in interface nxopen.features.shipdesign.MarkingLineBuilder

Returns the option to hide original marking lines.

hideOriginal() - Method in interface nxopen.features.UntrimBuilder

Returns the hide original option.

hideOriginal() - Method in interface nxopen.features.WaveDatumBuilder

Returns the hideoriginal
License requirements: None.

hideOriginal() - Method in interface nxopen.features.WaveSketchBuilder

Returns the hide original option
License requirements: None.

hideOriginal() - Method in interface nxopen.geometricutilities.SnipIntoPatchesBuilder

Returns the option indicating to hide or show the original.

hideOriginalCurves() - Method in interface nxopen.features.sheetmetal.UnbendBuilder

Returns the option to keep or hide input curves
License requirements: None.

hideParentCurves(Tag, int, UFModl.ParentDispInfo[], int, UFModl.ParentDispInfo[]) - Method in interface nxopen.uf.UFModlGeneral

Refer to UF_MODL_hide_parent_curves for documentation.

hideParents() - Method in interface nxopen.features.Feature

Hide the body created by the parent feature
License requirements: solid_modeling ("SOLIDS MODELING") OR cam_base ("CAM BASE") OR geometric_tol ("GDT") OR insp_programming ("INSPECTION PROGRAMMING")
.

hidePartGeometry() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the hide part geometry
License requirements: None.

hidePositioningDimensions() - Method in interface nxopen.features.RPOBuilder

Hides display of all the positioning dimensions
License requirements: features_modeling ("FEATURES MODELING"), solid_modeling ("SOLIDS MODELING")
.

hideReliefStatus() - Method in interface nxopen.tooling.ReliefDesignBuilder

Returns the option to hide (true) or show (false) the relief.

hideSafeZone() - Method in interface nxopen.tooling.DieEngTrimAngleCheckBuilder

Returns the option to indicate whether to hide the feedback objects whose trim angles are in the safe zone or not
License requirements: None.

hideShowLdObject(NXObject, boolean) - Method in interface nxopen.ame.AMEManager

Hide/Show a LD object
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.

hideSmoothEdges() - Method in interface nxopen.facet.STLImportBuilder

Returns the indicator for whether to hide smooth edges
License requirements: solid_modeling ("SOLIDS MODELING") OR studio_free_form ("STUDIO FREE FORM")
.

hideSmoothEdges() - Method in interface nxopen.STLImporter

Returns the Hide Smooth Edges flag.

hideSmoothEdges - Variable in class nxopen.uf.UFStd.StlParams

hideSmoothEdges - Variable in class nxopen.uf.UFStd.VrmlParams

hideSmoothEdges() - Method in interface nxopen.VRMLImporter

Returns the Hide Smooth Edges flag.

hideSubBlocksAsString() - Method in interface nxopen.blockstyler.LineColorFontWidth

Returns the hide sub block.

hideTempalteItemsWithoutInput(boolean) - Method in interface nxopen.report.Report

Hide template items without user input in Report .

hideTool() - Method in interface nxopen.features.sheetmetal.SolidPunchBuilder

Returns the option to hide the tool body after creating the punch.

hideToolBodyFlag() - Method in interface nxopen.features.AssemblyCutBuilder

Returns the hide tool body flag
License requirements: None.

hideToolPath(CAMObject) - Method in interface nxopen.cam.PathDisplay

Hide tool path
License requirements: None.

hideView(int) - Method in interface nxopen.shipdesign.Navigator

Hides a navigator view.

hideViewBorder() - Method in interface nxopen.drawings.DraftingView

Hide the view border of the view.

HIERARCHICAL - Static variable in class nxopen.assemblies.Subset.PartitionViewStyleType

Show hierachical view style for subset

HIGH - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Convergency

Onestep solver convergency level is high

HIGH - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.Priority

High priority

HIGH - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.Priority

HIGH - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.Priority

HIGH - Static variable in class nxopen.cae.PolygonGeometryManager.PolygonBodyResolutionType

HIGH - Static variable in class nxopen.CGMBuilder.ImageResolutionOption

High Resolution

HIGH - Static variable in class nxopen.die.TrimLineDevelopmentBuilder.Convergency

Onestep solver convergency level is high

HIGH - Static variable in class nxopen.display.EnvironmentBuilder.ImageBlurType

HIGH - Static variable in class nxopen.display.ImageBasedLighting.ImageBlurType

HIGH - Static variable in class nxopen.display.IRayPlusStudioEditorBuilder.IRayPlusStudioStaticImageResolutionType

static image output resolution of 300 DPI (dots per inch)

HIGH - Static variable in class nxopen.display.RayTracedStudioBuilder.StationaryDisplayQualityType

Very good ray traced display quality (Photoreal for Iray+)

HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.DynamicRayTracedStudioTilingQualityType

Very small tiles used during progressive updates of ray traced display

HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.RayTracedStudioStaticImageResolutionType

static image output resolution of 300 DPI (dots per inch)

HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StaticAntialiasingType

Very good antialiasing performed for static image rendering

HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StaticRayTracedStudioQualityType

Very good ray traced display quality for static image rendering

HIGH - Static variable in class nxopen.display.RayTracedStudioEditorBuilder.StationaryRayTracedStudioQualityType

Very good ray traced display quality when dynamic interaction stops

HIGH - Static variable in class nxopen.display.Shadows.SsaoContrastType

High contrast

HIGH - Static variable in class nxopen.display.Shadows.SsaoQualityType

High quality setting

HIGH - Static variable in class nxopen.facet.MultiPatchAlignmentBuilder.ResolutionType

Uses a high number of facets for the alignment.

HIGH - Static variable in class nxopen.features.MeshTransformerBuilder.SmoothingType

Smoothing high

HIGH - Static variable in class nxopen.features.vehicledesign.ReflectionDataBuilder.ResolutionType

high

HIGH - Static variable in class nxopen.JtCreator.AdvancedMaterials

HIGH

HIGH - Static variable in class nxopen.motion.PostProcess.EnvelopeAccuracyModes

HIGH - Static variable in class nxopen.PlotBuilder.ImageResolutionOption

High Resolution

HIGH - Static variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ResolutionType

HIGH - Static variable in class nxopen.Print3dBuilder.PrintInfillEnum

HIGH - Static variable in class nxopen.Print3dBuilder.PrintQualityEnum

HIGH - Static variable in class nxopen.PrintBuilder.ImageResolutionOption

High Resolution

HIGH - Static variable in class nxopen.PrintPDFBuilder.ImageResolutionOption

High Resolution

HIGH - Static variable in class nxopen.visualreporting.GroupLabel.TagPriorityOption

Hign priority

HIGH_POINT - Static variable in class nxopen.cam.InspectionMethodBuilder.DatumPlaneFittingTypes

High Point

HIGH_QUALITY - Static variable in class nxopen.uf.UFDisp.ShadeMethod

HIGH_SPEED_ARC - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes

High Speed Arcs

HIGH_TO_LOW - Static variable in class nxopen.cam.FlowCutSteepContainment.SteepCutDirectionTypes

High to Low

highEnd - Variable in class nxopen.features.DeformDefinitionBuilder.JaDeformDefinitionExpData

Maximum value in range of input values for expression.

highEnd - Variable in class nxopen.uf.UFModl.UdfsExp

highEndRenderingVisualization() - Method in interface nxopen.preferences.SessionPreferences

Returns object for doing Visualization Performance preferences settings applicable to entire session .

HIGHER - Static variable in class nxopen.SpreadsheetManager.LookupMode

Returns the higher cell

highFrequencyCutoff() - Method in interface nxopen.cae.CorrelSolutionBuilder

Returns the high-frequency cutoff for work modes
License requirements: None.

highFrequencyCutoff() - Method in interface nxopen.cae.PreTestSolutionBuilder

Returns the high-frequency cutoff
License requirements: None.

highFrequencyFilteringMode() - Method in interface nxopen.cae.CorrelSolutionBuilder

Returns the high-frequency filtering option for work modes
License requirements: None.

highFrequencyFilteringMode() - Method in interface nxopen.cae.PreTestSolutionBuilder

Returns the high-frequency filtering option
License requirements: None.

highLabel - Variable in class nxopen.cae.IMeshManager.StatusInfo

high label

highLabelPreference() - Method in interface nxopen.cae.CoordinateSelectionRecipe

Returns the high label preference.

highLabelPreference() - Method in interface nxopen.cae.PointSelectionRecipe

Returns the high label preference.

highlight() - Method in interface nxopen.DisplayableObject

Highlights the object.

highlight() - Method in interface nxopen.features.Feature

Highlight the body created by the feature
License requirements: None.

HIGHLIGHT - Static variable in class nxopen.features.shipdesign.RollingLineBuilder.ConstructionMethodTypes

Use an initial value method and march along the highlight (zero degree isocline) at each subsequent location.

HIGHLIGHT - Static variable in class nxopen.motion.PackagingInterferenceBuilder.Action

Highlight interfering bodies.

HIGHLIGHT_EDGES - Static variable in class nxopen.display.SelPref.FaceAnalysisViews

highlight face by edges

HIGHLIGHT_EDGES - Static variable in class nxopen.display.SelPref.ShadedViews

highlight face by edges

HIGHLIGHT_FACES - Static variable in class nxopen.display.SelPref.FaceAnalysisViews

highlight face by face

HIGHLIGHT_FACES - Static variable in class nxopen.display.SelPref.ShadedViews

highlight face by face

highlightCallback(CustomFeatureHighlightEvent) - Method in interface nxopen.features.CustomFeatureClass.HighlightCallback

Prototype for highlight callbacks
License requirements: solid_modeling ("SOLIDS MODELING")
.

highlightCheckResult(ExamineSteelFeatureBuilderCheck, boolean) - Method in interface nxopen.features.shipdesign.ExamineSteelFeatureBuilder

Highlights or unhighlights the geometries in graphic to display the check result.

highlightCollision() - Method in interface nxopen.tooling.RunSimulationBuilder

Returns the highlight collision bodies flag
License requirements: None.

highlightColor() - Method in interface nxopen.annotations.PartsListBuilder

Returns the highlight color specifies the color used for the delimiters that highlight manual cell text
License requirements: None.

highlightColor - Variable in class nxopen.DisplayManager.J3dMaterial

object highlight color

highlightConnectingFacesScale() - Method in interface nxopen.tooling.MWSearchRegionBuilder

Returns the highlight connecting faces scale
License requirements: None.

highlightDamageValues() - Method in interface nxopen.cae.DurabilityDamageEvaluationBuilder

Returns the highlighting of non-zero damage values.

HIGHLIGHTED - Static variable in class nxopen.uf.UFDraw.SxsegHighlight

highlightFaceTranslucency() - Method in interface nxopen.preferences.SubdivisionModelingPreferences

Returns the percentage translucency of the highlighted face.

highlightHiddenEdgesToggle() - Method in interface nxopen.display.SelPref

Returns the highlight hidden edges toggle
License requirements: None.

HIGHLIGHTING - Static variable in class nxopen.sim.SimDebugBuilder.DumpType

Dump Highlighting

HIGHLIGHTING - Static variable in class nxopen.sim.SimDebugBuilder.TraceType

Trace Highlighting

HighlightLinesAnalysis - Interface in nxopen.geometricanalysis

Represents a Highlight Lines Analysis object.

HighlightLinesAnalysisBuilder - Interface in nxopen.geometricanalysis

Represents a HighlightLinesAnalysis builder.

HighlightLinesAnalysisBuilder.DisplayMethods - Class in nxopen.geometricanalysis

Deprecated.

Deprecated in NX8.0.0. Use HighlightLinesAnalysisBuilder.Types2 instead.

HighlightLinesAnalysisBuilder.LightPlacements - Class in nxopen.geometricanalysis

light placement

HighlightLinesAnalysisBuilder.LightPlaneOptions - Class in nxopen.geometricanalysis

light plane options

HighlightLinesAnalysisBuilder.Resolutions - Class in nxopen.geometricanalysis

resolution options

HighlightLinesAnalysisBuilder.Types - Class in nxopen.geometricanalysis

Deprecated.

Deprecated in NX8.0.0. Use HighlightLinesAnalysisBuilder.LightPlacements instead.

HighlightLinesAnalysisBuilder.Types2 - Class in nxopen.geometricanalysis

four types of display methods

highlightManualText() - Method in interface nxopen.annotations.PartsListBuilder

Returns the highlight manual text specifies whether manual cell text is to be highlighted by delimiters
License requirements: None.

highlightManualText - Variable in class nxopen.uf.UFPlist.Prefs

highlightNextPair() - Method in interface nxopen.geometricanalysis.SimpleInterference

Highlights the pairs of interfering faces after a SimpleInterference.performCheck() .

highlightOnCollision() - Method in interface nxopen.mechatronics.CollisionBodyBuilder

Returns the highlight on collision.

highlightOnCollision() - Method in interface nxopen.mechatronics.CollisionSensorBuilder

Returns the option of highlight on collision.

highlightOnCollision() - Method in interface nxopen.mechatronics.DistanceSensorBuilder

Returns the option of highlight on collision.

highlightOriginalToggle() - Method in interface nxopen.display.SelPref

Returns the highlight original
License requirements: None.

highlightResult(ExamineGeometry.Check) - Method in interface nxopen.geometricanalysis.ExamineGeometry

Highlights results of a specified type of check.

highlightRunNavItems(NXObject[], boolean) - Method in interface nxopen.routing.FindByAttributesBuilder

Highlight/Unhighlight the search results for FindByAttributes
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.

highlightSelectedFace() - Method in interface nxopen.tooling.FaceColorManagementBuilder

Returns the option whether to highlight selected faces
License requirements: None.

highlightSelectionOnRolloverToggle() - Method in interface nxopen.display.SelPref

Returns the highlight selection on rollover toggle
License requirements: None.

highlightStatus - Variable in class nxopen.uf.UFDraw.SxsegInfo

highlightStatus - Variable in class nxopen.uf.UFObj.DispProps

highlightTargets() - Method in interface nxopen.cae.SimBCDisplay

Returns the flag indicating whether or not highlighting of targets is required
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation")
.

highlightView() - Method in interface nxopen.routing.electrical.CablewaysLayoutView

Highlights the layout view.

highlightWire() - Method in interface nxopen.preferences.RoutingElectrical

Returns the option to highlight a wire in the connection list navigator.

highlightWithThickWidthToggle() - Method in interface nxopen.display.SelPref

Returns the highlight with thick width toggle
License requirements: None.

highOrderEffectsTab() - Method in interface nxopen.motion.TirePropertyBasicBuilder

Returns the highOrderTab.

highOrderEffectsTab() - Method in interface nxopen.motion.TirePropertyMotorcycleBuilder

Returns the highOrderTab.

highPrecisionRotation() - Method in interface nxopen.preferences.SessionVisualizationScreen

Returns whether mouse-driven rotation is to be done using a higher precision than normal, which means that a given mouse motion will result in a smaller rotation.

highQualityBitmap() - Method in interface nxopen.blockstyler.Button

Returns the HighQualityBitmap
License requirements: None.

highQualityBitmap() - Method in interface nxopen.blockstyler.Enumeration

Returns the HighQualityBitmap
License requirements: None.

highQualityBitmap() - Method in interface nxopen.blockstyler.Label

Returns the HighQualityBitmap
License requirements: None.

highQualityBitmap() - Method in interface nxopen.blockstyler.TabControl

Returns the HighQualityBitmap
License requirements: None.

highQualityBitmap() - Method in interface nxopen.blockstyler.Table

Returns the HighQualityBitmap
License requirements: None.

highQualityBitmap() - Method in interface nxopen.blockstyler.Wizard

Returns the HighQualityBitmap.

highQualityImageVisualization() - Method in interface nxopen.preferences.SessionPreferences

Returns object for doing Visualization High Quality Image preferences settings applicable to entire session .

highRadius() - Method in interface nxopen.geometricutilities.ReduceSurfaceRadiusBuilder

Returns the high radius which specifies lower limit to filter out all qualified faces
License requirements: None.

HIGHT - Static variable in class nxopen.cam.CycleCoolant.Flow

coolant flow high

highThicknessColor() - Method in interface nxopen.cae.ThicknessBuilder

Returns the above high color
License requirements: None.

HIGHTLIGHT_MEASURE - Static variable in class nxopen.preferences.SessionMeasureRequirements.ActionOnViolation

Highlight (color) measure for requirements violations

highvalueattribute - Variable in class nxopen.cae.AttributeSelectionRecipe.UserAttributesData

HILITE - Static variable in class nxopen.features.SectionSurfaceBuilderEx.ConicType

Hilite mode

HILL - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.OrthotropicFatigueCriterionEnum

HILL - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum

Hill

HILL - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType

Hill failure criteria

HINGE - Static variable in class nxopen.positioning.Constraint.Type

For internal use only

hingeDirection() - Method in interface nxopen.drawings.SectionLineBuilder

Deprecated.

Deprecated in NX10.0.0. Use ViewStyleOrientationBuilder.hingeLine()

hingeDistance() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the distance to move the reference point of the active hood
License requirements: None.

HingeJoint - Interface in nxopen.mechatronics

Represents the Hinge Joint.

HingeJointBuilder - Interface in nxopen.mechatronics

Represents a HingeJoint builder.

HingeJointCollection - Interface in nxopen.mechatronics

Represents a collection of Hinge Joint.

hingeJoints() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the HingeJointCollection belonging to this part
Created in NX7.5.1

hingeLine() - Method in interface nxopen.drawings.OrientationViewStyle

Returns the hinge line for an existing auxillary view.

hingeLine() - Method in interface nxopen.drawings.ViewStyleOrientationBuilder

Returns the view hinge line definition on the ORIENTATION tab of the View Style Dialog
License requirements: None.

HingeLineBuilder - Interface in nxopen.drawings

Represents a Drawings.HingeLineBuilder.

HingeLineBuilder.Hingeline - Class in nxopen.drawings

Specifies the hinge line vector option

hingePoint() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the point about which to rotate the active hood
License requirements: None.

hint() - Method in interface nxopen.report.BaseArgument

Returns the argument hint.

hint() - Method in interface nxopen.report.BaseItem

Returns the item hint.

HIP_BREADTH - Static variable in class nxopen.HumanData.AdvancedScalingType

Indicate scaling of hip_breadth

HIP_POINT - Static variable in class nxopen.HumanData.EditDisplayBodyParts

Indicate edit display body parts named hip point

hipPoint() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder

Returns the hip point of the driver.

hiqhQualityImage() - Method in interface nxopen.ModelingView

Returns the High Quality Image instance belonging to a view .

historyBuffer() - Method in interface nxopen.cam.SimulationOptionsBuilder

Returns the history buffer
License requirements: None.

HistoryEventInformation() - Constructor for class nxopen.BasePart.HistoryEventInformation

HistoryEventInformation(String, String, String, String, int) - Constructor for class nxopen.BasePart.HistoryEventInformation

Constructor for the HistoryEventInformation object.

hitBody - Variable in class nxopen.uf.UFModl.RayHitPointInfo

hitFace - Variable in class nxopen.uf.UFModl.RayHitPointInfo

hitList - Variable in class nxopen.uf.UFModeling.TraceARayData

hitNormal - Variable in class nxopen.uf.UFModl.RayHitPointInfo

hitPoint - Variable in class nxopen.uf.UFModl.RayHitPointInfo

hmop() - Method in interface nxopen.UFSession

HOFFMAN - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.OrthotropicFailureCriterionEnum

Hoffman

HOFFMAN - Static variable in class nxopen.cae.LaminatePly.PlyFailureTheoryType

Hoffman failure criteria

HOLD_TO_LINE - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions

Moving along the line

HOLD_TO_PLANE - Static variable in class nxopen.facet.BestFitAlignBuilder.ConstraintOptions

Moving in the plane

HOLDER - Static variable in class nxopen.tooling.ElectrodeComponentBuilder.Chuck

HOLDER_ANGLE_FROM_PART - Static variable in class nxopen.cam.ToolAxisInterpolate.TurnInputModeTypes

holder angle from part

holderAngleBuilder() - Method in interface nxopen.cam.TurningToolBuilder

Returns the holder angle builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.

holderCheck() - Method in interface nxopen.cam.ToolPathEditorBuilder

Returns the holder check
License requirements: None.

holderClearance() - Method in interface nxopen.cam.CutParameters

Returns the Holder Clearance
License requirements: None.

holderClearance() - Method in interface nxopen.cam.ToolPathSplitBuilder

Returns the Holder Clearance
License requirements: None.

holderControlAngleBuilder() - Method in interface nxopen.cam.TurnToolBuilder

Returns the holder control angle (inheritable double)
License requirements: cam_base ("CAM BASE")
.

holderControlWidthBuilder() - Method in interface nxopen.cam.TurnToolBuilder

Returns the holder control width (inheritable double)
License requirements: cam_base ("CAM BASE")
.

holderDescription() - Method in interface nxopen.cam.ToolBuilder

Returns the holder description
License requirements: None.

holderGrooveHand() - Method in interface nxopen.cam.GrooveToolBuilder

Returns the holder groove hand
License requirements: cam_base ("CAM BASE")
.

holderHand() - Method in interface nxopen.cam.GrooveToolBuilder

Returns the holder hand
License requirements: None.

holderHand() - Method in interface nxopen.cam.TurnToolBuilder

Returns the turn holder hand
License requirements: None.

holderId() - Method in interface nxopen.sim.KinematicComponentBuilder

Returns the holder id
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

holderIdString() - Method in interface nxopen.sim.KinematicComponentBuilder

Returns the holder id in string
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.

holderInsertExtensionBuilder() - Method in interface nxopen.cam.GrooveToolBuilder

Returns the holder insert extension builder (inheritable double) for groove tools
License requirements: cam_base ("CAM BASE")
.

holderLengthBuilder() - Method in interface nxopen.cam.TurningToolBuilder

Returns the turn holder length builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.

holderLibraryReference() - Method in interface nxopen.cam.ToolBuilder

Returns the holder libref
License requirements: None.

holderLibref() - Method in interface nxopen.cam.CutterExport

Returns the libref of the export holder
License requirements: None.

holderLock() - Method in interface nxopen.cam.TurningToolBuilder

Returns the lock turn holder toggle
License requirements: None.

holderNumber() - Method in interface nxopen.cam.ToolChangeCiBuilder

Returns the Tool holder builder
License requirements: None.

holderSaveFlag() - Method in interface nxopen.cam.CutterExport

Returns the export type
License requirements: None.

holderSection() - Method in interface nxopen.cam.SoftTool

Returns the holder sections
License requirements: None.

HolderSection() - Constructor for class nxopen.uf.UFCutter.HolderSection

HolderSection(double, double, double, double) - Constructor for class nxopen.uf.UFCutter.HolderSection

HolderSectionBuilder - Interface in nxopen.cam

Represents a Holder Section Builder .

holderSectionBuilder() - Method in interface nxopen.cam.MillingToolBuilder

Returns the holder sections builder
License requirements: cam_base ("CAM BASE")
.

HolderSectionBuilder.AllParametersData - Class in nxopen.cam

This class holds the data returned from HolderSectionBuilder.getAllParameters(nxopen.NXObject)

HolderSectionBuilder.Data - Class in nxopen.cam

This class holds the data returned from HolderSectionBuilder.get(nxopen.NXObject)

holderShankDefinitionMode() - Method in interface nxopen.cam.TurnToolBuilder

Returns the holder shank definition mode
License requirements: None.

holderShankLineBuilder() - Method in interface nxopen.cam.TurningToolBuilder

Returns the turn holder shank line builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.

holderShankType() - Method in interface nxopen.cam.TurningToolBuilder

Returns the turn holder shank type
License requirements: None.

holderShankWidthBuilder() - Method in interface nxopen.cam.TurningToolBuilder

Returns the turn holder shank width builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.

holderStyle() - Method in interface nxopen.cam.GrooveToolBuilder

Returns the holder style
License requirements: None.

holderStyle() - Method in interface nxopen.cam.TurnToolBuilder

Returns the turn holder style
License requirements: None.

holderToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder

Returns the Tool holder toggle
License requirements: None.

holderUse() - Method in interface nxopen.cam.TurningToolBuilder

Returns the use turn holder toggle
License requirements: None.

holderWidthBuilder() - Method in interface nxopen.cam.TurningToolBuilder

Returns the turn holder width builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.

holdingForce() - Method in interface nxopen.tooling.ForceCalculationBuilder

Returns the pressure-pad-force of the process.

HoldingSystemBuilder - Interface in nxopen.cam

Represents a HoldingSystemBuilder
This is an abstract class, and cannot be instantiated.

HoldingSystemBuilderList - Interface in nxopen.cam

Represents a list of objects.

holdingSystemsList() - Method in interface nxopen.cam.MachinePocketGroupBuilder

Returns the holding systems list
License requirements: None.

HOLE - Static variable in class nxopen.annotations.DimensionType

Hole dimension

HOLE - Static variable in class nxopen.annotations.FitAnsiHoleType

Use hole values for the ANSI limit and fit tolerance

HOLE - Static variable in class nxopen.annotations.SearchCriteriaCalloutBuilder.CalloutTypes

Hole

HOLE - Static variable in class nxopen.cam.HoleBossGeom.HoleBossTypes

Type: Hole

HOLE - Static variable in class nxopen.features.DeleteFaceBuilder.SelectTypes

This stands for delete hole type.

Hole - Interface in nxopen.features

Represents a Hole feature
To create or edit an instance of this class, use HoleFeatureBuilder

Created in NX3.0.0

HOLE - Static variable in class nxopen.features.sheetmetal.AeroLighteningCutoutBuilder.Types

HOLE - Static variable in class nxopen.features.sheetmetal.LighteningCutoutBuilder.CutoutType

HOLE - Static variable in class nxopen.tooling.FastenerAssy.SelectionTypeMethod

Hole type

HOLE - Static variable in class nxopen.tooling.ScrapDesignBuilder.RemoveType

Captures hole scraps

Hole.CounterboreHoleData - Class in nxopen.features

This class holds the data returned from Hole.getCounterboreHole()

Hole.CountersinkHoleData - Class in nxopen.features

This class holds the data returned from Hole.getCountersinkHole()

Hole.SimpleHoleData - Class in nxopen.features

This class holds the data returned from Hole.getSimpleHole()

Hole.Subtype - Class in nxopen.features

Represents the subtype of the hole

HOLE_BOUNDARY - Static variable in class nxopen.tooling.ScrapDesignBuilder.ScrapDefType

Hole boundary curves will be extracted automatically to create scraps

HOLE_CALLOUT - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod

Hole Callout based measurement

HOLE_DATUM_LOCATION - Static variable in class nxopen.uf.UFConstants

HOLE_DATUM_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants

HOLE_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

HOLE_MEASUREMENT_LOCATION - Static variable in class nxopen.uf.UFConstants

HOLE_MEASUREMENT_LOCATION_NON_ASSOC - Static variable in class nxopen.uf.UFConstants

HOLE_SERIES - Static variable in class nxopen.features.HolePackageBuilder.Types

Hole series

HOLE_TABLE - Static variable in class nxopen.drawings.TrackDrawingChangesReportFilterBuilder.Filter

Hole Table Report Filter

HOLE_TYPE_SYMBOL_AND_NUMBER - Static variable in class nxopen.annotations.HoleTableSettingsLabelBuilder.IndexType

Hole Type Symbol and Number

HOLE_VECTOR - Static variable in class nxopen.uf.UFConstants

holeAllowNonCircularHolesToggle() - Method in interface nxopen.cae.MeshControlBuilder

Returns the hole allow non circular holes filter toggle
License requirements: None.

holeAttributes() - Method in interface nxopen.die.HeelpostBuilder

Returns the hole attributes
License requirements: None.

HoleAttributesData() - Constructor for class nxopen.die.HoleChildBuilder.HoleAttributesData

HoleAttributesData() - Constructor for class nxopen.die.HoleParentBuilder.HoleAttributesData

HoleAttributesData() - Constructor for class nxopen.die.PadChildBuilder.HoleAttributesData

HoleAttributesData() - Constructor for class nxopen.die.PadParentBuilder.HoleAttributesData

HoleAttributesData() - Constructor for class nxopen.die.PierceHoleChildBuilder.HoleAttributesData

HoleAttributesData() - Constructor for class nxopen.die.PierceHoleParentBuilder.HoleAttributesData

holeAxisType() - Method in interface nxopen.cam.OperationBuilder

Returns the Hole Axis Type
License requirements: None.

holeBossGeom() - Method in interface nxopen.cam.GeometryCiBuilder

Returns the hole or boss geometry
License requirements: cam_base ("CAM BASE")
.

HoleBossGeom - Interface in nxopen.cam

Represents a CAM geometry builder
This is an abstract class and cannot be instantiated.

holeBossGeom() - Method in interface nxopen.cam.HoleBossGeometry

Returns the sub builder for hole boss geom
License requirements: None.

HoleBossGeom.DepthLimitTypes - Class in nxopen.cam

Deprecated.

Deprecated in NX8.0.0. The property that used this enum is replaced by HoleBossSet.depthLimit() .

HoleBossGeom.FormData - Class in nxopen.cam

This class holds the data returned from HoleBossGeom.getForm()

HoleBossGeom.FormPitchTypes - Class in nxopen.cam

the form and pitch types .

HoleBossGeom.FormTypes - Class in nxopen.cam

the Form types .

HoleBossGeom.HoleBossTypes - Class in nxopen.cam

the hole or boss types .

HoleBossGeom.OptimizationTypes - Class in nxopen.cam

the optimization types .

HoleBossGeom.RotationTypes - Class in nxopen.cam

the rotation types .

HoleBossGeometry - Interface in nxopen.cam

Represents a CAM geometry builder
To create a new instance of this class, use NCGroupCollection.createHoleBossGeometryBuilder(nxopen.cam.CAMObject)

Created in NX7.5.0

holeBossGeomType() - Method in interface nxopen.cam.HoleBossGeom

Returns the hole or boss types
License requirements: None.

HoleBossSet - Interface in nxopen.cam

Represents a Cut Area Geometry builder
To create a new instance of this class, use HoleBossGeom.createHoleBossBuilder(nxopen.NXObject[], double, double, nxopen.NXObject, int)

Created in NX7.5.0

HoleBossSet.DepthLimitTypes - Class in nxopen.cam

the depth limit types .

HoleBossSetList - Interface in nxopen.cam

Represents a list of objects.

holeCalloutSettings() - Method in interface nxopen.annotations.StyleBuilder

Returns the hole callout settings builder
License requirements: None.

HoleCalloutSettingsBuilder - Interface in nxopen.annotations

Represents a HoleCalloutSettingsBuilder , this builder contains list(s) of parameter(s) for feature(s).

HoleCalloutSettingsBuilder.Featuretype - Class in nxopen.annotations

This reprensent the option that indicates a type of hole features.

HoleCalloutSettingsBuilder.LeaderAttachment - Class in nxopen.annotations

This reprensent the option that indicates the position for the leader to attach to.

HoleCalloutSettingsBuilder.Parametertype - Class in nxopen.annotations

This reprensent the option that indicates a type of hole feature parameters.

holeCenter() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder

Returns the hole center
License requirements: None.

holeCenter() - Method in interface nxopen.features.sheetmetal.LighteningCutoutBuilder

Returns the hole center when the type is LighteningCutoutBuilder.CutoutType.HOLE
License requirements: None.

HoleChildBuilder - Interface in nxopen.die

Represents a Die Hole Child sub feature.

HoleChildBuilder.HoleAttributesData - Class in nxopen.die

This class holds the data returned from HoleChildBuilder.getHoleAttributes()

HoleChildBuilder.PadAttributesData - Class in nxopen.die

This class holds the data returned from HoleChildBuilder.getPadAttributes()

holeColor() - Method in interface nxopen.tooling.ScrapDesignBuilder

Returns the hole color
License requirements: None.

HoleDatumSymbolBuilder - Interface in nxopen.tooling

Creates hole datum symbol builder for progressive die.

HoleDatumSymbolBuilder.SymbolType - Class in nxopen.tooling

symbol type

holeDepth() - Method in interface nxopen.cam.OperationBuilder

Returns the max depth distance builder
License requirements: None.

holeDepth() - Method in interface nxopen.geometricutilities.EndHoleData

Returns the hole depth
License requirements: None.

holeDepth() - Method in interface nxopen.tooling.WireHoleBuilder

Returns the depth of wire hole.

holeDepthLimitOption() - Method in interface nxopen.features.HolePackageBuilder

Returns the hole depth limit - this is applicable for general hole, threaded hole and drill size hole type
License requirements: None.

holeDepthLimitOption() - Method in interface nxopen.geometricutilities.EndHoleData

Returns the hole depth limit
License requirements: None.

holeDepthType() - Method in interface nxopen.cam.OperationBuilder

Returns the Hole Depth Type
License requirements: None.

holeDiameter() - Method in interface nxopen.cae.SuppressHoleBuilder

Returns the holedia
License requirements: None.

holeDiameter() - Method in interface nxopen.die.PadChildBuilder

Returns the hole diameter of the die pad.

holeDiameter() - Method in interface nxopen.die.PadParentBuilder

Returns the hole diameter of die pads.

holeDiameter() - Method in interface nxopen.features.shipdesign.PlateDivideBuilder

Returns the hole diameter.

holeDiameter() - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder

Returns the hole diameter.

holeDiameter() - Method in interface nxopen.features.shipdesign.ShipPreparationInfo

Returns the hole diameter.

holeDiameter() - Method in interface nxopen.geometricutilities.EndHoleData

Returns the hole diameter
License requirements: None.

holeDiameter() - Method in interface nxopen.geometricutilities.MiddleHoleData

Returns the hole diameter
License requirements: None.

holeDiameter() - Method in interface nxopen.geometricutilities.StartHoleData

Returns the hole diameter
License requirements: None.

holeDiameter() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

Returns the hole diameter
License requirements: None.

holeDiameter() - Method in interface nxopen.tooling.WireHoleBuilder

Returns the diameter to create wire hole
License requirements: None.

holeDiameterAttributes() - Method in interface nxopen.die.HeelpostBuilder

Returns the hole diameter attributes (only the title is used)
License requirements: None.

HoleDimension - Interface in nxopen.annotations

Represents a hole dimension
To create or edit an instance of this class, use RadialDimensionBuilder

Created in NX4.0.0

HoleDrilling - Interface in nxopen.cam

Represents a Hole Drilling Operation
To create or edit an instance of this class, use HoleDrillingBuilder

Created in NX9.0.1

HoleDrillingBuilder - Interface in nxopen.cam

Represents a HoleDrillingBuilder Builder
To create a new instance of this class, use OperationCollection.createHoleDrillingBuilder(nxopen.cam.CAMObject)

Created in NX9.0.0

HoleDrillingBuilder.ControlPointOffsetType - Class in nxopen.cam

Available types for control point offset

HoleDrillingBuilder.IntersectionStrategyType - Class in nxopen.cam

Available types for intersection strategy

HoleDrillingBuilder.RetractOutputModeType - Class in nxopen.cam

Available types for canned retract output mode

HoleDrillingCutParameters - Interface in nxopen.cam

Represents a HoleDrillingCutParameters Builder .

HoleElementEdgeMethod - Interface in nxopen.cae

Represents the output from the hole element edge smart selector method
To obtain an instance of this class use CAE::SmartSelectionManager
.

holeFace() - Method in interface nxopen.features.sheetmetal.AeroLighteningCutoutBuilder

Returns the hole face
License requirements: None.

holeFace() - Method in interface nxopen.tooling.RemoveHolesBuilder

Returns the hole faces
License requirements: None.

holeFace - Variable in class nxopen.uf.UFModl.SmholeData

HoleFeature - Interface in nxopen.linedesigner

Represents a hole feature feature
To create or edit an instance of this class, use HoleFeatureBuilder

Created in NX9.0.0

HoleFeatureBuilder - Interface in nxopen.features

Represents a Hole feature builder.

HoleFeatureBuilder - Interface in nxopen.linedesigner

Represents a LineDesigner.HoleFeature builder
To create a new instance of this class, use nxopen.linedesigner.LineDesignerManager#createHoleFeatureBuilder
Default values.

HoleFeatureBuilder.HoleSubtype - Class in nxopen.features

Represents the subtype of the hole

holeForm() - Method in interface nxopen.geometricutilities.StartHoleData

Returns the hole form
License requirements: None.

holeFreeEdgesToggle() - Method in interface nxopen.cae.MeshControlBuilder

Returns the hole free edges only filter toggle
License requirements: None.

HoleGridOrientationData() - Constructor for class nxopen.die.SteelInsertBuilder.HoleGridOrientationData

holeIndexColor() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

Returns the hole index character color
License requirements: None.

holeIndexSize() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

Returns the hole index character size
License requirements: None.

holeIndexTypeEnum() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

Returns the hole index type enumeration
License requirements: None.

holeList() - Method in interface nxopen.cam.GeometrySet

Deprecated.

Deprecated in NX9.0.0. Use PatchOpeningsBuilder instead.

holeList() - Method in interface nxopen.cam.HoleBossGeom

Returns the hole list
License requirements: None.

holeLocation() - Method in interface nxopen.features.HoleFeatureBuilder

Returns the reference point of the hole.

HoleMachiningBuilder - Interface in nxopen.cam

Represents a HoleMachiningBuilder Builder
This is an abstract class and cannot be instantiated.

HoleMachiningCutParameters - Interface in nxopen.cam

Represents a HoleMachiningCutParameters Builder
This is an abstract class and cannot be instantiated.

HoleMaking - Interface in nxopen.cam

Represents a Hole Making operation
To create or edit an instance of this class, use HoleMakingBuilder

Created in NX7.5.0

HoleMakingBuilder - Interface in nxopen.cam

Represents a HoleMaking Builder
To create a new instance of this class, use OperationCollection.createHoleMakingBuilder(nxopen.cam.CAMObject)

Created in NX5.0.0

HoleMakingBuilder.ControlPointTypes - Class in nxopen.cam

Available types for Control Point Type in Hole Making Operation

HoleMakingBuilder.ModelDepthTypes - Class in nxopen.cam

Available types for model depth in Hole Making Operation

HoleMakingBuilder.ToolAxisTypes - Class in nxopen.cam

the tool axis mode options

holeManufacturingNote() - Method in interface nxopen.tooling.ToolingManager

Returns the HoleManufacturingNoteCollection instance belonging to this part .

HoleManufacturingNoteBuilder - Interface in nxopen.tooling

Tooling builder for HoleManufacturingNote
To create a new instance of this class, use HoleManufacturingNoteCollection.createHoleManufacturingNoteBuilder()
Default values.

HoleManufacturingNoteBuilder.DefineByViewOrHoles - Class in nxopen.tooling

the view selection or window selection type

HoleManufacturingNoteBuilder.HoleIndexType - Class in nxopen.tooling

the hole index type

HoleManufacturingNoteCollection - Interface in nxopen.tooling

Creates a HoleManufacturingNoteBuilder
To obtain an instance of this class, refer to ToolingManager

Created in NX9.0.0

holeManufacturingNoteColor() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

Returns the manufaturing information character color
License requirements: None.

holeManufacturingNoteOrigin() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

Returns the manufacturing information origin
License requirements: None.

holeManufacturingNoteSize() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

Returns the manufaturing information character size
License requirements: None.

holeManufacturingNoteStyle() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder

Returns the hole manufacturing note style
License requirements: None.

holeMaxRadius() - Method in interface nxopen.cae.MeshControlBuilder

Returns the hole max radius
License requirements: None.

holeMinRadius() - Method in interface nxopen.cae.MeshControlBuilder

Returns the hole min radius
License requirements: None.

holename - Variable in class nxopen.uf.UFModl.ShapePatternClientDialogData

HolePackage - Interface in nxopen.features

Represents a hole package and hole series feature.

HolePackageBuilder - Interface in nxopen.features

Represents a HolePackage builder.

HolePackageBuilder.HoleDepthLimitOptions - Class in nxopen.features

Represents hole depth limit options.

HolePackageBuilder.HoleDepthOptions - Class in nxopen.features

Represents hole depth specification options.

HolePackageBuilder.HoleForms - Class in nxopen.features

Represents hole form options.

HolePackageBuilder.ThreadLengthOptions - Class in nxopen.features

Represents thread length options.

HolePackageBuilder.ThreadRotationOptions - Class in nxopen.features

Represents thread rotation options.

HolePackageBuilder.Types - Class in nxopen.features

Represents hole types.

HoleParentBuilder - Interface in nxopen.die

Represents a Die Hole Parent sub feature.

HoleParentBuilder.HoleAttributesData - Class in nxopen.die

This class holds the data returned from HoleParentBuilder.getHoleAttributes()

HoleParentBuilder.PadAttributesData - Class in nxopen.die

This class holds the data returned from HoleParentBuilder.getPadAttributes()

holePinMatching() - Method in interface nxopen.cam.InspectionMeasDataBuilder

Returns the hole pin matching mode when adding measured data
License requirements: None.

holePosition() - Method in interface nxopen.features.HolePackageBuilder

Returns the hole position
License requirements: None.

holeRemovalMinModulus() - Method in interface nxopen.features.sheetmetal.MetaformBuilder

Returns the hole removal min modulus
License requirements: None.

holeReport() - Method in interface nxopen.tooling.ToolingManager

Returns the HoleReport instance belonging to this part .

HoleReportBuilder - Interface in nxopen.tooling

Represents a HoleReportBuilder This class is for Hole Report Design UI
To create a new instance of this class, use HoleReportCollection.createHoleReportBuilder()
Default values.

HoleReportBuilder.EnumQuadrantType - Class in nxopen.tooling

Specifies the option of which quadrant is positive

HoleReportBuilder.EnumSelectionType - Class in nxopen.tooling

Specifies the option of selection type to create hole table

HoleReportBuilder.Types - Class in nxopen.tooling

Specifies the option of hole table type

HoleReportCollection - Interface in nxopen.tooling

Creates a HoleReportBuilder
To obtain an instance of this class, refer to ToolingManager

Created in NX6.0.0

HOLES - Static variable in class nxopen.cam.InspectionPatternFeatureBuilder.FeatureFilterTypes

Only inner circle, cylinder, and cone inspection features will be listed

HOLES - Static variable in class nxopen.tooling.HoleManufacturingNoteBuilder.DefineByViewOrHoles

holeShape() - Method in interface nxopen.die.PierceItemBuilder

Returns the hole shape
License requirements: None.

holeSubType() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

Returns the hole sub-type
License requirements: None.

holeSubType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the hole sub-type
License requirements: None.

HoleTable - Interface in nxopen.annotations

Represents a HoleTable .

holeTable() - Method in interface nxopen.tooling.HoleReportBuilder

Returns the hole table to edit
License requirements: None.

HoleTableBuilder - Interface in nxopen.annotations

Represents a HoleTableBuilder .

HoleTableCollection - Interface in nxopen.annotations

Represents a collection of HoleTable objects
To obtain an instance of this class, refer to AnnotationManager

Created in NX9.0.0

holeTableContent() - Method in interface nxopen.annotations.TableEditSettingsBuilder

Returns the Hole table settings content builder
License requirements: None.

holeTableContent() - Method in interface nxopen.annotations.TableStyleBuilder

Returns the Hole table settings content builder
License requirements: None.

holeTableContent() - Method in interface nxopen.drafting.PreferencesBuilder

Returns the Hole table settings content builder
License requirements: None.

holeTableFormat() - Method in interface nxopen.annotations.TableEditSettingsBuilder

Returns the Hole table settings format builder
License requirements: None.

holeTableFormat() - Method in interface nxopen.annotations.TableStyleBuilder

Returns the Hole table settings format builder
License requirements: None.

holeTableFormat() - Method in interface nxopen.drafting.PreferencesBuilder

Returns the Hole table settings format builder
License requirements: None.

holeTableHoleFilters() - Method in interface nxopen.annotations.TableEditSettingsBuilder

Returns the Hole table settings hole filters builder
License requirements: None.

holeTableHoleFilters() - Method in interface nxopen.annotations.TableStyleBuilder

Returns the Hole table settings hole filters builder
License requirements: None.

holeTableHoleFilters() - Method in interface nxopen.drafting.PreferencesBuilder

Returns the Hole table settings hole filters builder
License requirements: None.

holeTableLabel() - Method in interface nxopen.annotations.TableEditSettingsBuilder

Returns the Hole table settings label builder
License requirements: None.

holeTableLabel() - Method in interface nxopen.annotations.TableStyleBuilder

Returns the Hole table settings label builder
License requirements: None.

holeTableLabel() - Method in interface nxopen.drafting.PreferencesBuilder

Returns the Hole table settings label builder
License requirements: None.

holeTables() - Method in interface nxopen.annotations.AnnotationManager

Hole Table collection .

HoleTableSettingsContentBuilder - Interface in nxopen.annotations

Represents a HoleTableSettingsContentBuilder
Created in NX9.0.0

HoleTableSettingsContentBuilder.Content - Class in nxopen.annotations

Represents Content options

HoleTableSettingsFormatBuilder - Interface in nxopen.annotations

Represents a HoleTableSettingsFormatBuilder
Created in NX9.0.0

HoleTableSettingsFormatBuilder.DeletedHolesDisplayType - Class in nxopen.annotations

Represents Deleted Holes Display options

HoleTableSettingsFormatBuilder.DepthMeasurementDatumType - Class in nxopen.annotations

Represents Depth Measurement Datum options

HoleTableSettingsFormatBuilder.ShowColumnsType - Class in nxopen.annotations

Represents Show Columns options

HoleTableSettingsFormatBuilder.SizeFormatType - Class in nxopen.annotations

Represents Size Format options

HoleTableSettingsHoleFiltersBuilder - Interface in nxopen.annotations

Represents a HoleTableSettingsHoleFiltersBuilder
Created in NX9.0.0

HoleTableSettingsHoleFiltersBuilder.ScopeType - Class in nxopen.annotations

the Scope enum

HoleTableSettingsLabelBuilder - Interface in nxopen.annotations

Represents a HoleTableSettingsLabelBuilder
Created in NX9.0.0

HoleTableSettingsLabelBuilder.IndexType - Class in nxopen.annotations

Represents Index Options

HoleTableSettingsLabelBuilder.RelativeLocationType - Class in nxopen.annotations

Represents Relative Location Options

HoleTableSettingsWorkflowBuilder - Interface in nxopen.annotations

Represents a HoleTableSettingsWorkflowBuilder
Created in NX9.0.0

holeTableWorkflow() - Method in interface nxopen.annotations.TableEditSettingsBuilder

Returns the Hole table settings workflow builder
License requirements: None.

holeTableWorkflow() - Method in interface nxopen.annotations.TableStyleBuilder

Returns the Hole table settings workflow builder
License requirements: None.

holeTableWorkflow() - Method in interface nxopen.drafting.PreferencesBuilder

Returns the Hole table settings workflow builder
License requirements: None.

holeTolerance() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

Returns the hole tolerance
License requirements: None.

holeTreatment() - Method in interface nxopen.features.sheetmetal.FlatPatternBuilder

Returns the hole treatment object This is applicable to flat pattern features created in NX12 and later release.

HoleTreatmentBuilder - Interface in nxopen.features.sheetmetal

The HoleTreatmentBuilder class is used to manage a builder object for a hole treatment in the flat pattern dialogs.

HoleTreatmentBuilder.TreatmentType - Class in nxopen.features.sheetmetal

Hole Treatment Type

holeType() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

Returns the hole type
License requirements: None.

holeType() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the hole type
License requirements: None.

holeType() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder

Returns the hole type
License requirements: None.

holeTypeEnum() - Method in interface nxopen.tooling.FaceColorManagementBuilder

Returns the hole type enumeration
License requirements: None.

HOLLOW - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.PropertyType

Hollow analysis

HOLLOW - Static variable in class nxopen.Print3dBuilder.PrintInfillEnum

HOLLOW_CIRCLE - Static variable in class nxopen.uf.UFDisp.PolyMarker

HOLLOW_CIRCLE - Static variable in class nxopen.userdefinedobjects.UserDefinedObjectDisplayContext.PolyMarker

HOLLOW_REVOLVED_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

HOLLOW_TORUS_FEATURE - Static variable in class nxopen.uf.UFGdt.FeatureType

HOME_LOCATION - Static variable in class nxopen.cam.InspectionCmmCommandBuilder.MoveTypes

Specifies a move to the home location

homeDir - Variable in class nxopen.uf.UFPlot.PrinterGroup

homePageURL() - Method in interface nxopen.preferences.SessionUserInterfaceUI

Returns the home page URL
License requirements: None.

homePtMethod() - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Returns the home point method
License requirements: None.

homePtPoint() - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Returns the home point location
License requirements: None.

HOMOGENEOUS - Static variable in class nxopen.cae.LaminatePly.SolidPropertyType

Extruded plies will use homogeneous property

homogeneousPlies() - Method in interface nxopen.cae.LaminateExtrudeSetupBuilder

Returns the option to (de)activate homogeneous ply meshes
License requirements: None.

homogeneousPlies() - Method in interface nxopen.cae.LaminateFillSetupBuilder

Returns the option to (de)activate homogeneous ply meshes
License requirements: None.

hood() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder

Returns the collector containing the faces of the active hood
License requirements: None.

HoodVisibility - Interface in nxopen.features.vehicledesign

Represents a hood visibility spline feature
To create or edit an instance of this class, use HoodVisibilityBuilder

Created in NX6.0.0

HoodVisibilityBuilder - Interface in nxopen.features.vehicledesign

Represents a HoodVisibility builder
To create a new instance of this class, use VehicleDesignCollection.createHoodVisibilityBuilder(nxopen.features.vehicledesign.HoodVisibility)
Default values.

Hookes - Class in nxopen.cae.optimization

Deprecated.

Deprecated in NX10.0.0. Use the ShellSection property on one of the following classes - ResultMeasureResultSectionOptions , ResultMeasureResultDirectionSectionOptions , or ResultMeasureResultAllOptions

hookupRegionUdoAndBodyForCavityAndCore() - Method in interface nxopen.tooling.MWDefineRegionsBuilder

Hook up cavity and core region UDO objects with the corresponding sheet bodies
License requirements: None.

horizAlignmentPosition - Variable in class nxopen.annotations.Annotation.AssociativeOriginData

Alignment position on horiz_annotation to align to.

horizAlignmentPosition - Variable in class nxopen.uf.UFDrf.AssociativeOrigin

horizAnnotation - Variable in class nxopen.annotations.Annotation.AssociativeOriginData

Annotation to align with.

horizAnnotation - Variable in class nxopen.uf.UFDrf.AssociativeOrigin

horizJust - Variable in class nxopen.uf.UFDraw.TabnotCellParams

horizJust - Variable in class nxopen.uf.UFTabnot.CellPrefs

HORIZONTAL - Static variable in class nxopen.ame.SymbolAnnotationBuilder.Orientation

HORIZONTAL - Static variable in class nxopen.annotations.CalloutGroupBuilder.Layout

Horizontal

HORIZONTAL - Static variable in class nxopen.annotations.ChamferOrientationType

default (same as the adjacent edge)

HORIZONTAL - Static variable in class nxopen.annotations.DimensionMeasurementBuilder.MeasurementMethod

Horizontal measurement direction

HORIZONTAL - Static variable in class nxopen.annotations.DimensionType

Horizontal dimension

HORIZONTAL - Static variable in class nxopen.annotations.FlipOption

Flips a symbol horizontally about a vertical line taken through its anchor point

HORIZONTAL - Static variable in class nxopen.annotations.NarrowTextOrientation

Specifies horizontal text orientation

HORIZONTAL - Static variable in class nxopen.annotations.TextOrientation

Specifies horizontal dimension text

HORIZONTAL - Static variable in class nxopen.AxisOrientation

HORIZONTAL - Static variable in class nxopen.cae.BeamEADBuilder.VectorChoiceType

the vector is defined to be horizontal

HORIZONTAL - Static variable in class nxopen.cae.BeamSection.DirectionOption

Indicates the horizontal direction of beam section

HORIZONTAL - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsVectorChoiceType

The vector is defined to be horizontal.

HORIZONTAL - Static variable in class nxopen.cae.xyplot.TextOrientation

Horizontal text orientation

HORIZONTAL - Static variable in class nxopen.diagramming.DiagrammingJumperprioritytype

Horizontal

HORIZONTAL - Static variable in class nxopen.diagramming.tables.HeaderOrientation

Horizontal header orientation

HORIZONTAL - Static variable in class nxopen.display.ImageBaseBuilder.ReferenceDirection

horizontal reference direction

HORIZONTAL - Static variable in class nxopen.drawings.ViewPlacementBuilder.Method

Align the view horizontally to another view

HORIZONTAL - Static variable in class nxopen.features.shipdesign.DrawingSheetBuilder.LayoutOptions

HORIZONTAL - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.Method

Horizontal

HORIZONTAL - Static variable in class nxopen.features.vehicledesign.DynamicCurbBuilder.MethodType

HORIZONTAL - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.ImageMovementTypes

Move image in horizonal direction.

HORIZONTAL - Static variable in class nxopen.geometricanalysis.ReflectionAnalysisBuilder.LineOrientationType

Horizontal.

horizontal() - Method in interface nxopen.InferredConstraintsBuilder

Returns the horizontal infer-constraint setting.

horizontal() - Method in interface nxopen.pid.OffSheetConnectorBuilder

Returns the option to flip the symbol horizontally.

HORIZONTAL - Static variable in class nxopen.PositioningDimension.Subtype

Horizontal dimension

HORIZONTAL - Static variable in class nxopen.routing.PlatformCreatorBuilder.ReferenceType

HORIZONTAL - Static variable in class nxopen.Sketch.ConstraintType

HORIZONTAL - Static variable in class nxopen.SketchAlignmentConstraint.Type

The two vertices are horizontally aligned

horizontal() - Method in interface nxopen.SketchAutoConstrainBuilder

Returns the horizontal
License requirements: None.

HORIZONTAL - Static variable in class nxopen.SketchConstraintBuilder.Constraint

HORIZONTAL - Static variable in class nxopen.tooling.AutoDimensionBuilder.TextOrientationType

HORIZONTAL - Static variable in class nxopen.uf.UFSket.ConType

HORIZONTAL_ALIGNMENT - Static variable in class nxopen.SketchConstraintBuilder.Constraint

HORIZONTAL_CENTERLINE1 - Static variable in class nxopen.features.AssociativityType

horizontal centerline end point 1

HORIZONTAL_CENTERLINE1 - Static variable in class nxopen.features.RPOBuilder.AssociativityType

horizontal centerline end point 1

HORIZONTAL_CENTERLINE2 - Static variable in class nxopen.features.AssociativityType

horizontal centerline end point 2

HORIZONTAL_CENTERLINE2 - Static variable in class nxopen.features.RPOBuilder.AssociativityType

horizontal centerline end point 2

HORIZONTAL_DIM - Static variable in class nxopen.Sketch.ConstraintType

HORIZONTAL_DIM - Static variable in class nxopen.uf.UFSket.ConType

HORIZONTAL_DISTANCE_BY_POSITION - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Offset

horizontal distance by position, applicable only for creation

HORIZONTAL_DISTANCE_FROM_ARC - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Offset

horizontal distance from arc

HORIZONTAL_DISTANCE_FROM_CENTER - Static variable in class nxopen.annotations.OffsetCenterPointBuilder.Offset

horizontal distance from center

HORIZONTAL_DOWN - Static variable in class nxopen.ame.AmeTeeJunctionType

HORIZONTAL_LEFT - Static variable in class nxopen.annotations.AssociativityLineOption

Horizontal left

HORIZONTAL_LEFT_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType

HORIZONTAL_LINE - Static variable in class nxopen.features.vehicledesign.GroundClearanceBuilder.SectionCurveType

HORIZONTAL_RIGHT - Static variable in class nxopen.annotations.AssociativityLineOption

Horizontal right

HORIZONTAL_RIGHT_LINE_TYPE - Static variable in class nxopen.uf.UFDrf.ObjectAssocLineType

HORIZONTAL_UP - Static variable in class nxopen.ame.AmeTeeJunctionType

HORIZONTAL_VERTICAL - Static variable in class nxopen.Sketch.AutoDimensioningRule

Create Horizontal and Vertical Dimensions

horizontalAlignment() - Method in interface nxopen.InferredConstraintsBuilder

Returns the horizontal alignment infer-constraint setting.

horizontalAngle() - Method in interface nxopen.features.vehicledesign.WindshieldDatumBuilder

Returns the horizontal inclined angle.

horizontalCenteringMark() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder

Returns the horizontal centering mark used to show the type of centering mark like LeftArrow/RightArrow.

horizontalCenteringMark() - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetBorderSettingsBuilder.centeringMarksHorizontal() instead.

HorizontalCenteringMarkType - Class in nxopen.diagramming

the horizontal centering mark type

HorizontalCenteringMarkType - Class in nxopen.drawings

the horizontal centering mark type

HorizontalDimension - Interface in nxopen.annotations

Represents a horizontal dimension
To create or edit an instance of this class, use LinearDimensionBuilder

Created in NX4.0.0

horizontalDirection() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder

Returns the horizontal direction
License requirements: None.

horizontalDirection() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder

Returns the horizontal direction
License requirements: None.

horizontalFlip() - Method in interface nxopen.annotations.BaseCustomSymbolBuilder

Returns the horizontal flip
License requirements: None.

horizontalGridSpacing() - Method in interface nxopen.linedesigner.PlatformEquipmentBuilder

Returns the horizontal grid spacing
License requirements: ld_line_designer ("FULL LINE DESIGNER")
.

horizontalGrowthDirection() - Method in interface nxopen.drawings.DrawingRegionBuilder

Returns the horizantal growth direction
License requirements: None.

horizontalInferredMarginLocation() - Method in interface nxopen.annotations.BaseOrdinateDimensionBuilder

Returns the horizontal inferred margin location
License requirements: None.

horizontalLeftMax() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

Returns the left horizontal maximum required approach angle calculated value.

horizontalLeftMax() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

Returns the left horizontal maximum required approach angle calculated value.

horizontalLeftMin() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

Returns the left horizontal minimum required approach angle calculated value.

horizontalLeftMin() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

Returns the left horizontal minimum required approach angle calculated value.

horizontalLength() - Method in interface nxopen.features.vehicledesign.CloseRangeCameraListItemBuilder

Returns the expression containing the value for the horizontal legth.

horizontalLimitBuilder() - Method in interface nxopen.cam.StepoverBuilder

Returns the horizontal limit (inheritable tool dependent)
License requirements: None.

horizontalLookup(String, String, String, int, SpreadsheetManager.LookupMode) - Method in interface nxopen.SpreadsheetManager

Reads the value from a given spreadsheet using a horizontal table lookup.

HORIZONTALLY - Static variable in class nxopen.display.CameraBuilder.FovMeasured

Horizontal

HORIZONTALLY_ALIGNED - Static variable in class nxopen.annotations.AssociativeOriginType

HorizontalOrdinateDimension - Interface in nxopen.annotations

Represents a horizontal ordinate dimension
To create or edit an instance of this class, use OrdinateDimensionBuilder

Created in NX4.0.0

HorizontalOrdinateMargin - Interface in nxopen.annotations

Represents a horizontal ordinate margin .

horizontalPointTravel() - Method in interface nxopen.features.vehicledesign.BaseDataDriverBuilder

Returns the horizontal seat adjustment in the direction of the x axis.

horizontalPointTravelExp() - Method in interface nxopen.features.vehicledesign.BaseDataPassengerBuilder

Returns the passenger's horizontal adjustment in x direction.

horizontalRef() - Method in interface nxopen.geometricutilities.CircularPattern

Returns the horizontal reference
License requirements: None.

horizontalRef() - Method in interface nxopen.geometricutilities.PolygonPattern

Returns the horizontal reference
License requirements: None.

horizontalRef() - Method in interface nxopen.geometricutilities.RectangularPattern

Returns the horizontal reference
License requirements: None.

horizontalRef() - Method in interface nxopen.geometricutilities.SpiralPattern

Returns the horizontal reference
License requirements: None.

horizontalReference() - Method in interface nxopen.features.shipdesign.Cutout2Builder

Returns the horizontal reference (optional, used only for Faces2Surfaces, FacesBetweenSurfacesSurface, and FacesCentered)
License requirements: None.

horizontalReference() - Method in interface nxopen.features.shipdesign.EdgeCutBuilder

Returns the horizontal reference.

HorizontalReference - Interface in nxopen.geometricutilities

the horizontal reference vector definition.

horizontalRefObject() - Method in interface nxopen.geometricutilities.HorizontalReference

Returns the direction object.

horizontalRefVector() - Method in interface nxopen.geometricutilities.HorizontalReference

Returns the horizontal reference vector
License requirements: None.

horizontalRightMax() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

Returns the right horizontal maximum required approach angle calculated value.

horizontalRightMax() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

Returns the right horizontal maximum required approach angle calculated value.

horizontalRightMin() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder

Returns the right horizontal minimum required approach angle calculated value.

horizontalRightMin() - Method in interface nxopen.features.vehicledesign.HeadImpactBPillarDetailBuilder

Returns the right horizontal minimum required approach angle calculated value.

horizontalSize() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder

Returns the size of horizontal zones.

horizontalSize() - Method in interface nxopen.diagramming.SheetZoneSettingsBuilder

Returns the size of the horizontal zone.

horizontalSize() - Method in interface nxopen.drawings.BordersAndZonesBuilder

Deprecated.

Deprecated in NX10.0.0. Use SheetZoneSettingsBuilder.horizontalSize() instead.

horizontalSize() - Method in interface nxopen.drawings.SheetZoneSettingsBuilder

Returns the horizontal size
License requirements: None.

horizontalTextJustification() - Method in interface nxopen.annotations.LetteringStyleBuilder

Returns the horizontal text justification
License requirements: None.

horizTextJust() - Method in interface nxopen.annotations.LetteringPreferences

Returns the horizontal text justification
License requirements: None.

horizTextJust - Variable in class nxopen.uf.UFDrf.LetteringPreferences

HOSE_COUPLING - Static variable in class nxopen.cam.fbm.ThreadFeatureGeometry.Form

Form: Hose Coupling

HOSE_COUPLING - Static variable in class nxopen.cam.HoleBossGeom.FormTypes

Form: Hose Coupling

HOSECOUPLING - Static variable in class nxopen.cam.DrillThreadMillToolBuilder.ToolFormTypeTypes

Hose Coupling

HOST_POINTER - Static variable in class nxopen.RuleManager.RuleType

hostName() - Method in interface nxopen.mechatronics.OPCClientBuilder

Returns the host name.

HOTCH_KISS_SUSPENSION - Static variable in class nxopen.motion.TextBasedElementBuilder.TypeChoices

hotSpot() - Method in interface nxopen.annotations.LocatorDesignatorBuilder

Returns the hot spot
License requirements: None.

hotSpotText() - Method in interface nxopen.annotations.LocatorDesignatorBuilder

Returns the hot spot text
License requirements: None.

hour - Variable in class nxopen.uf.UFPs.KernelVersion

hoverSceneDialogDelay() - Method in interface nxopen.annotations.DimensionWorkflowBuilder

Returns the hover scene dialog delay time
License requirements: None.

howFar - Variable in class nxopen.uf.UFModeling.AskAngleEdgeData

howFar - Variable in class nxopen.uf.UFModeling.AskHorzDimeData

howFar - Variable in class nxopen.uf.UFModeling.AskParaDistData

howFar - Variable in class nxopen.uf.UFModeling.AskParaEdgeData

howFar - Variable in class nxopen.uf.UFModeling.AskPerpDistData

howFar - Variable in class nxopen.uf.UFModeling.AskVertDimeData

HPOINT - Static variable in class nxopen.HumanData.ReferencePointType

Indicate reference point at the H-point

HSC_PERIOD - Static variable in class nxopen.ame.PlcDataType

HTML - Static variable in class nxopen.cam.InspectionGraphicalReportOutputBuilder.OutputFormatType

HTML - Static variable in class nxopen.cam.WorkInstructionOutputBuilder.OutputFormatType

HUB_FINISH - Static variable in class nxopen.cam.SurfaceContourBuilder.DriveMethodTypes

Hub Finish

hubColor() - Method in interface nxopen.cam.Preferences

Returns the hub color
License requirements: None.

hubExtensions() - Method in interface nxopen.cam.BladeCutLevels

Returns the hub extensions
License requirements: None.

HubFinish - Interface in nxopen.cam

Represents a Hub Finish Drive Method Builder .

hubFinish() - Method in interface nxopen.cam.SurfaceContourBuilder

Returns the Hub Finish Drive Method builder
License requirements: None.

hubGeometry() - Method in interface nxopen.cam.GeometryCiBuilder

Returns the hub geometry
License requirements: cam_base ("CAM BASE")
.

hubStock() - Method in interface nxopen.cam.MillCutParameters

Returns the hub stock
License requirements: None.

hue - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHLS

Hue in HSV pattern is the color type (such as red, blue, or yellow) Ranges from 0-360

hue - Variable in class nxopen.preferences.ViewVisualizationSpecialEffects.ColorHSV

Hue in HSV pattern is the color type (such as red, blue, or yellow) Ranges from 0-360

HULL - Static variable in class nxopen.cae.responsesimulation.DDAMExcitation.MountingType

hull() - Method in interface nxopen.features.shipdesign.DeckBuilder

Returns the sheet body that defines the hull shape.

Hull - Interface in nxopen.features.shipdesign

Represents a Hull feature.

HULL - Static variable in class nxopen.features.shipdesign.ShipDesignPreferencesBuilder.Types

Hull type

HULL - Static variable in class nxopen.features.shipdesign.ShipnamesBuilderType

HullBuilder - Interface in nxopen.features.shipdesign

This class is used to create or edit a Hull feature.

HullBuilder.Types - Class in nxopen.features.shipdesign

Indicates the method that is being used to define the mold face of the hull.

Human - Interface in nxopen.features

Represents a human feature.

human() - Method in interface nxopen.HumanPosturePredictionBuilder

Returns the human for posture prediction
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.

human - Variable in class nxopen.HumanReachZone.Data

Human feature

Human.CreateReachZoneData - Class in nxopen.features

This class holds the data returned from Human.createReachZone()

HumanBuilder - Interface in nxopen.features

Represents a human feature.

HumanBuilder.StatureData - Class in nxopen.features

This class holds the data returned from HumanBuilder.getStatureData()

HumanBuilder.WeightData - Class in nxopen.features

This class holds the data returned from HumanBuilder.getWeightData()

HumanData - Interface in nxopen

Represent the data used to create the human .

HumanData.AdvancedScalingType - Class in nxopen

This enum represents the types of the advanced scaling variable names

HumanData.AppearanceType - Class in nxopen

This enum represents the appearance of human

HumanData.DatabaseType - Class in nxopen

This enum represents the database used for human creation

HumanData.EditDisplayBodyParts - Class in nxopen

This enum represents the body parts of edit human display

HumanData.GenderType - Class in nxopen

This enum represents the gender of human

HumanData.HandFootType - Class in nxopen

This enum represents the types of human hand foot

HumanData.HandGoalType - Class in nxopen

This enum represents the type to define hand goal position

HumanData.InverseKinematicsBalanceType - Class in nxopen

This enum represents the balance type of active reach

HumanData.InverseKinematicsBodyParts - Class in nxopen

This enum represents the body parts of dynamic drag

HumanData.InverseKinematicsHeadEyeType - Class in nxopen

This enum represents the head and eye type of active reach

HumanData.InverseKinematicsInitJoint - Class in nxopen

This enum represents the motion initiation joint of hand dynamic drag

HumanData.InverseKinematicsType - Class in nxopen

This enum represents the types of inverse kinematics

HumanData.JointType - Class in nxopen

This enum represents the types of the joint names

HumanData.ReferencePointType - Class in nxopen

This enum represents the location of the reference point

HumanData.SegmentScalingType - Class in nxopen

This enum represents the types of the segment scaling variable names

HumanData.SideType - Class in nxopen

This enum represents the types of human side

HumanData.StatureType - Class in nxopen

This enum represents the stature data type of human

HumanData.StatureUnitType - Class in nxopen

This enum represents the unit for stature

HumanData.WeightType - Class in nxopen

This enum represents the weight data type of human

HumanData.WeightUnitType - Class in nxopen

This enum represents the unit for weight

HumanData.XformData - Class in nxopen

This class holds the data returned from HumanData.getXform()

HumanHandsDialogBuilder - Interface in nxopen

Dialog for creating and editing standalone/"disembodied" hand figures
To create a new instance of this class, use HumanBuilder.createHumanHandsDialogBuilder()
Default values.

HumanHandsDialogBuilder.BreadthType - Class in nxopen

hand breadth for scaling

HumanHandsDialogBuilder.DatabaseType - Class in nxopen

database used for scaling.

HumanHandsDialogBuilder.GenderType - Class in nxopen

gender of hand figure, also used for scaling

HumanHandsDialogBuilder.HandType - Class in nxopen

left or right hand

HumanHandsDialogBuilder.LengthType - Class in nxopen

hand length for scaling

HumanHandsDialogBuilder.StyleType - Class in nxopen

gloved or bare hand

HumanHandShapeData - Interface in nxopen

Represent hand shape data .

HumanHandShapeData.HandOpt - Class in nxopen

This enum represents the hand shape data type of human

HumanPosturePrediction - Interface in nxopen

Represent posture prediction object
To create or edit an instance of this class, use HumanPosturePredictionBuilder

Created in NX5.0.0

HumanPosturePredictionBuilder - Interface in nxopen

Represents a Human Posture Prediction Builder.

HumanPosturePredictionBuilder.ComputeHandCsysData - Class in nxopen

This class holds the data returned from HumanPosturePredictionBuilder.computeHandCsys()

HumanPosturePredictionBuilder.CushionFirmnessType - Class in nxopen

Represents the cushion firmness type

HumanPosturePredictionBuilder.GarbType - Class in nxopen

Represents the garb_type.

HumanPosturePredictionBuilder.HandDataSaeData - Class in nxopen

This class holds the data returned from HumanPosturePredictionBuilder.getHandDataSae(nxopen.HumanData.SideType)

HumanPosturePredictionBuilder.HandFootCsysData - Class in nxopen

This class holds the data returned from HumanPosturePredictionBuilder.getHandFootCsys(nxopen.HumanData.HandFootType, nxopen.HumanData.SideType)

HumanPosturePredictionBuilder.OccupantType - Class in nxopen

Represents the occupant type.

HumanPosturePredictionBuilder.PredictionMethodType - Class in nxopen

Represents the predition method type.

HumanPosturePredictionBuilder.SeatType - Class in nxopen

Represents the seat type

HumanPosturePredictionBuilder.SgrpCoordinatesData - Class in nxopen

This class holds the data returned from HumanPosturePredictionBuilder.getSgrpCoordinates()

HumanPosturePredictionBuilder.SteeringWheelPedalType - Class in nxopen

This enum represents the steering wheel or pedal type, if there is no steering wheel or pedal, use csys as steering wheel and pedal type

HumanPosturePredictionBuilder.TransmissionType - Class in nxopen

Represents the transmission type

HumanPosturePredictionBuilder.VehicleType - Class in nxopen

Represents the vehicle type.

HumanReachZone - Interface in nxopen

Represents a human reach zone.

HumanReachZone.Data - Class in nxopen

This class holds the data returned from HumanReachZone.getData()

HumanReachZone.MethodType - Class in nxopen

This enum represents the methods for computing the reach zone

humidityPlaces() - Method in interface nxopen.cam.InspectionCmmCommandBuilder

Returns the humidity decimal places
License requirements: None.

HUNDRED - Static variable in class nxopen.cam.RoundPointBuilder.Output

nearest hundred

HUNDRED_THOUSANDTH - Static variable in class nxopen.cam.RoundPointBuilder.Output

nearest hundred thousandth

HUNDREDTH - Static variable in class nxopen.cam.RoundPointBuilder.Output

nearest hundredth

HW_ANY - Static variable in class nxopen.ame.PlcDataType

HW_DEVICE - Static variable in class nxopen.ame.PlcDataType

HW_DPMASTER - Static variable in class nxopen.ame.PlcDataType

HW_DPSLAVE - Static variable in class nxopen.ame.PlcDataType

HW_HSC - Static variable in class nxopen.ame.PlcDataType

HW_IEPORT - Static variable in class nxopen.ame.PlcDataType

HW_INTERFACE - Static variable in class nxopen.ame.PlcDataType

HW_IO - Static variable in class nxopen.ame.PlcDataType

HW_IOSYSTEM - Static variable in class nxopen.ame.PlcDataType

HW_MODULE - Static variable in class nxopen.ame.PlcDataType

HW_PTO - Static variable in class nxopen.ame.PlcDataType

HW_PWM - Static variable in class nxopen.ame.PlcDataType

HW_SUBMODULE - Static variable in class nxopen.ame.PlcDataType

hwaddress() - Method in interface nxopen.ame.PlcSymbolBuilder

Returns the string hwaddress
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.

hwaddressOffsetBit() - Method in interface nxopen.ame.PlcSymbolBuilder

Returns the int hwaddress offset bit
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.

hwaddressOffsetByte() - Method in interface nxopen.ame.PlcSymbolBuilder

Returns the int hwaddress offset byte
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.

HYBRID_RADIOSITY - Static variable in class nxopen.ModelingViewHighQualityImage.ShadeMethod

Uses standard rendering techniques to calculate direct lighting together with radiosity processing for indirect lighting for image rendering.

HybridMesh - Interface in nxopen.cae

Represents swept Mesh
To create or edit an instance of this class, use Mesh3dHybridBuilder

Created in NX11.0.0

HYDRAULIC - Static variable in class nxopen.die.ClampingSlotBuilder.Types

HydraulicCylinder - Interface in nxopen.mechatronics

Represents the Hydraulic Cylinder.

HydraulicCylinderBuilder - Interface in nxopen.mechatronics

Represents a HydraulicCylinder builder.

HydraulicCylinderBuilder.OutputRodType - Class in nxopen.mechatronics

the Rod types.

HydraulicCylinderCollection - Interface in nxopen.mechatronics

Represents a collection of Hydraulic Cylinder.

hydraulicCylinders() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the HydraulicCylinderCollection belonging to this part
Created in NX11.0.0

HydraulicLifter - Interface in nxopen.presslinesimulation

Represents a hydraulic lifter used in a press line simulation.

HydraulicLifterBuilder - Interface in nxopen.presslinesimulation

Represents a HydraulicLifterBuilder builder
To create a new instance of this class, use ApplicationManager.createHydraulicLifterBuilder(nxopen.Part, nxopen.presslinesimulation.HydraulicLifter)
Default values.

HydraulicLifterBuilderList - Interface in nxopen.presslinesimulation

Represents a list of objects.

HydraulicLifterListBuilder - Interface in nxopen.presslinesimulation

Represents a HydraulicLifterListBuilder builder
To create a new instance of this class, use ApplicationManager.createHydraulicLifterListBuilder(nxopen.Part)

Created in NX12.0.0

HydraulicValve - Interface in nxopen.mechatronics

Represents the Hydraulic Valve.

HydraulicValveBuilder - Interface in nxopen.mechatronics

Represents a HydraulicValve builder.

HydraulicValveBuilder.OutputValveType - Class in nxopen.mechatronics

the Valve types.

HydraulicValveCollection - Interface in nxopen.mechatronics

Represents a collection of Hydraulic Valve.

hydraulicValves() - Method in interface nxopen.mechatronics.PhysicsManager

Returns the PneumaticValveCollection belonging to this part
Created in NX11.0.0

Hyperbola - Interface in nxopen

Represents a hyperbola curve.

Hyperbola() - Constructor for class nxopen.uf.UFEval.Hyperbola

Hyperbola(double[], double, double, double[], double[], double[]) - Constructor for class nxopen.uf.UFEval.Hyperbola

HYPERBOLA_GEOM - Static variable in class nxopen.uf.UFBrep.GeomType

HyperbolaCollection - Interface in nxopen

Represents a collection of hyperbolas.

hyperbolas() - Method in interface nxopen.BasePart

Returns the HyperbolaCollection instance belonging to this part .

hypermatrixBufferSize() - Method in interface nxopen.cae.responsesimulation.EvaluationParameters

Returns the buffer allocated for Hypermatrix files
License requirements: nx_response_anlys ("NX Response Analysis")
.

hysteretic() - Method in interface nxopen.cae.responsesimulation.NormalMode

Returns the hysteretic factor
License requirements: nx_response_anlys ("NX Response Analysis")
.

hysteretic() - Method in interface nxopen.motion.NormalModeProperty

Returns the hysteretic factor
License requirements: mechanisms ("MECHANISMS")
.

HZ - Static variable in class nxopen.cae.LaminateSineEventBuilder.AdditionalFrequeciesUnitsEnum

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z _