- Z - Static variable in class nxopen.annotations.BaseFrameBarBuilder.AxisType
-
Ship Z Axis
- Z - Static variable in class nxopen.annotations.LineWeldDataBuilder.WeldSizeCodeType
-
- Z - Static variable in class nxopen.annotations.SizeLetterCode
-
Specifies size letter code "z"
- z - Variable in class nxopen.cae.aerostructures.author.ABB.MetallicPanelCompressivePlasticityCurveBc1Data
-
Critical buckling stress (including plasticity) / secant yield stress F0.7
- z - Variable in class nxopen.cae.aerostructures.author.ABB.MetallicPanelCompressivePlasticityCurveBc2Data
-
Critical buckling/wrinkling stress (including plasticity) / secant yield stress F0.7
- z - Variable in class nxopen.cae.aerostructures.author.ABB.MetallicPanelCompressivePlasticityCurveBc3Data
-
Critical buckling stress (including plasticity) / secant yield stress F0.7
- Z - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsComponentEnd
-
Z translational
- Z - Static variable in class nxopen.cae.connections.Dof
-
Z Translation degree of freedom
- z - Variable in class nxopen.cae.CorrelAlignmentBuilder.ReferencePt
-
Point Coordinate
- Z - Static variable in class nxopen.cae.DamperEADBuilder.TranslationalComponentEnd
-
Z translational
- Z - Static variable in class nxopen.cae.FrfSet.NodeComponent
-
z component
- Z - Static variable in class nxopen.cae.LaminateDynamicEventBuilder.ExcitationSelectedAxisEnum
-
- Z - Static variable in class nxopen.cae.LaminateRandomEventBuilder.ExcitationAxisEnum
-
Deprecated.
- z() - Method in interface nxopen.cae.NodeCreateBuilder
-
Returns the z
License requirements: None.
- z() - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
Returns the z
License requirements: None.
- Z - Static variable in class nxopen.cae.optimization.TBSTopologyLinkCondition.AxisType
-
Represents Z axis
- Z - Static variable in class nxopen.cae.Post.AxisymetricAxis
-
- Z - Static variable in class nxopen.cae.Post.ClipPlane
-
- Z - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
Z component of a 3D vector
- Z - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- Z - Static variable in class nxopen.cae.responsesimulation.Excitation.Component
-
- Z - Static variable in class nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder.RotationAxisType
-
- Z - Static variable in class nxopen.cae.Result.Component
-
- Z - Static variable in class nxopen.cae.SpringEADBuilder.TranslationalComponentEnd
-
Z translational
- Z - Static variable in class nxopen.cae.xyplot.AxisDirection
-
Z-axis
- Z - Static variable in class nxopen.cae.xyplot.Direction
-
Option to show plot in the Z axis direction
- z() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Returns the Z coordinate of one end of a bounded line or any point on an unbounded line
License requirements: None.
- z() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the Z at measured point
License requirements: None.
- Z - Static variable in class nxopen.cam.RotaryPolarMoveBuilder.LockAxisDirection
-
Z-Axis
- Z - Static variable in class nxopen.display.DynamicSectionTypes.Axis
-
Z axis
- Z - Static variable in class nxopen.features.DatumAxisBuilder.FixedType
-
Fixed datum axis thru Z Axis
- Z - Static variable in class nxopen.features.EdgeSymmetryBuilder.MovementDirections
-
Along ZC direction
- Z - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMoveDirection
-
Along ZC direction
- Z - Static variable in class nxopen.features.NSidedSurfaceBuilder.CenterControlAxisType
-
z axis
- Z - Static variable in class nxopen.features.PolylineBuilder.WCSOptionType
-
Along Z axis
- Z - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.PlaneTypes
-
- Z - Static variable in class nxopen.features.StudioSplineBuilderEx.WCSOptionType
-
Along Z axis
- Z - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Translate in Z direction
- Z - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalRotatingAxisType
-
Rotate in Z direction
- Z - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalScalingDirectionType
-
Scale in Z direction
- Z - Static variable in class nxopen.features.subdivision.TransformCageData.WCSOptionType
-
Along Z axis
- Z - Static variable in class nxopen.fields.DisplayPropertiesBuilder.Legacy3DType
-
- Z - Static variable in class nxopen.fields.DisplayPropertiesBuilder.VectorType
-
- Z - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.XyzTypes
-
z-axis plane
- Z - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.XyzDirectionType
-
Z direction
- Z - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.XyzTypes
-
z-axis plane
- Z - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.WCSOptionType
-
Along Z axis
- Z - Static variable in class nxopen.geometricutilities.MovePoleBuilder.WCSDirectionType
-
- Z - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Axis
-
Active axis in z-axis direction
- Z - Static variable in class nxopen.geometricutilities.PointSetAlignmentBuilder.ConstraintOptions
-
Z axis
- Z - Static variable in class nxopen.motion.BeamForceBuilder.VectorTypes
-
Z Vector
- Z - Static variable in class nxopen.motion.ControlInputPortBuilder.MeasuredComponent
-
Z
- Z - Static variable in class nxopen.motion.ControlOutputBuilder.DirectionType
-
Output Variable Direction Z
- Z - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices
-
Deprecated.
Z
- Z - Static variable in class nxopen.motion.MotionSensorBuilder.Component
-
z component
- Z - Static variable in class nxopen.motion.ScalarForceBuilder.DirectionType
-
for Z direction
- Z - Static variable in class nxopen.motion.ScalarTorqueBuilder.DirectionType
-
Direction Z
- Z - Static variable in class nxopen.motion.SplineBeamBuilder.SectionAxisType
-
Z Vector
- Z - Static variable in class nxopen.motion.StandardSectionBuilder.StandardSectionType
-
Z
- z - Variable in class nxopen.Point3d
-
- z - Variable in class nxopen.Point4d
-
- z() - Method in interface nxopen.sim.KinematicChain
-
Returns the Z axis of the kinematic chain
License requirements: None.
- Z - Static variable in class nxopen.tooling.IntermediateStageBuilder.Orientations
-
orientation Z
- Z - Static variable in class nxopen.tooling.QuickDatumCsysBuilder.AlignVectors
-
A list includes Z vector
- z - Variable in class nxopen.Vector3d
-
- Z - Static variable in class nxopen.weld.JointmarkBuilder.ProjectionDirectionOptions
-
- Z - Static variable in class nxopen.weld.WeldDatumControlDirection
-
Z direction
- ZACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- zagLeadAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Zag Lead Angle
License requirements: None.
- zagRotationAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Zag Rotation Angle
License requirements: None.
- zagRotationAxis() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Zag Rotation Axis
License requirements: None.
- zagTiltAngle() - Method in interface nxopen.cam.ToolAxisVariable
-
Returns the Zag Tilt Angle
License requirements: None.
- ZANGULAR_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- ZANGULAR_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- ZAXIS - Static variable in class nxopen.cae.AxiSymmetricParameters.AxisOfRotation
-
- ZAXIS - Static variable in class nxopen.cae.xyplot.ModelType
-
- zaxis() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the Z position
License requirements: None.
- zaxis() - Method in interface nxopen.cam.AlongMcsAxisMoveBuilder
-
Returns the delta z
License requirements: None.
- ZAXIS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationAxisOptions
-
Rotate about Z axis
- ZAXIS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamXYZAxis
-
Z Axis
- zaxis() - Method in interface nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder
-
Returns the ground to roof vector.
- ZAXIS - Static variable in class nxopen.uf.UFCurve.PrincipalAxis
-
- ZAXIS - Static variable in class nxopen.uf.UFPath.Axis
-
- ZAXIS - Static variable in class nxopen.WCS.Axis
-
- ZAXIS - Static variable in class nxopen.XYZAxis
-
Z axis
- ZAXIS_LABEL - Static variable in class nxopen.cae.xyplot.ModelType
-
- ZAXIS_NUMBER - Static variable in class nxopen.cae.xyplot.ModelType
-
- zaxisSmoothing() - Method in interface nxopen.cam.MillCutParameters
-
Returns the Z Axis Smoothing.
- ZAxisSmoothing - Interface in nxopen.cam
-
- ZAxisSmoothing.Options - Class in nxopen.cam
-
Available options for z axis smoothing
- ZBEND - Static variable in class nxopen.tooling.BendInsertDesignBuilder.BendTypeOption
-
z bend
- ZBENDING - Static variable in class nxopen.tooling.ForceCalculationBuilder.ProcessTypes
-
Z bending
- ZC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.AngleVector
-
- ZC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.DistanceVector
-
- ZC - Static variable in class nxopen.features.FitCurveBuilder.ProjectionDirectionOptions
-
WCS Z axis
- ZC - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.SectionAxisNormal
-
Along Z Axis
- ZC - Static variable in class nxopen.features.StudioXformBuilder.RotationDirectionType
-
Deprecated.
Rotate in Z direction
- ZC - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale in Z direction
- ZC - Static variable in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Translate in Z direction
- ZC - Static variable in class nxopen.geometricanalysis.sectionanalysis.RadialBuilder.RotationAxisType
-
ZC axis
- ZC - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder.PlaneType
-
ZC plane
- zc - Variable in class nxopen.routing.BendReportManager.XyzReport
-
- ZC_AXIS - Static variable in class nxopen.features.DatumAxisBuilder.Types
-
Datum axis thru Z axis
- ZC_AXIS - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
- ZC_CONSTANT - Static variable in class nxopen.cam.DrillSurfaceBuilder.SurfaceType
-
zc constant
- ZC_XC - Static variable in class nxopen.features.GeneralConicBuilder.DrawingPlaneOptions
-
Use ZC-XC plane
- zcConstant() - Method in interface nxopen.cam.DrillSurfaceBuilder
-
Returns the zc constant, will create one plane based on this value
License requirements: None.
- zcoefficientsType() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
Returns the zCoefficientsType type will be constant or spline
License requirements: None.
- ZCOMPONENT - Static variable in class nxopen.uf.UFMotion.VectorComponent
-
- zcoordinate() - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder
-
- zcoordinate() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Returns the z coordinate position for the datum surface location
License requirements: None.
- zcoordinateExp() - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder
-
Returns the expression for the Z coordinate
License requirements: None.
- zcoordinatepoints - Variable in class nxopen.cae.ftk.ComplexSectionBasedMatrixRecord.SectionData
-
Z-Coordinate data
- zcoordinatepoints - Variable in class nxopen.cae.ftk.RealSectionBasedMatrixRecord.SectionData
-
Z-Coordinate data
- zcoordinateUnit() - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord
-
Returns the Z-Coordinate unit
License requirements: None.
- zcurve() - Method in interface nxopen.motion.RoadBuilder
-
Returns the z spline curve for the road object of path type
License requirements: mechanisms ("MECHANISMS")
.
- zcurve() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the z spline curve of a user defined segment
License requirements: mechanisms ("MECHANISMS")
.
- zcurveProfile() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
Returns the component z curve profile.
- zcurveProfile() - Method in interface nxopen.motion.RoadBuilder
-
Returns the z spline curve defined by a profile for the road object of path type
License requirements: mechanisms ("MECHANISMS")
.
- zcurveProfile() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the z spline curve defined by a profile for the user defined road segment object
License requirements: mechanisms ("MECHANISMS")
.
- zcustomMarkerLabel() - Method in interface nxopen.cae.xyplot.PlotGraphTemplate
-
Returns the z custom marker label
License requirements: None.
- ZCXCPLANE - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
ZC-XC plane.
- zdatumFilter() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the z datum filter
License requirements: None.
- zdepth() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the Z depth.
- zdepthOffset() - Method in interface nxopen.cam.PlanarMillingBuilder
-
Returns the Z-Depth Offset
License requirements: None.
- zdepthOffset() - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
Returns the z-depth offset
License requirements: None.
- zdimension() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the z dimension of product body
License requirements: None.
- zdimension() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the z dimension of product body
License requirements: None.
- ZDIR - Static variable in class nxopen.tooldesigner.SelectDatumsBuilder.ConesDir
-
- zdirection() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the Z-frame direction.
- ZDISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- zdistance() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the z component of distance for translation in a cartesian/cylindrical coordinate system
License requirements: None.
- zdistance() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the z distance
License requirements: None.
- zdistance() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the distance along Z-direction.
- zdistanceBuilder() - Method in interface nxopen.cam.MachineHeadGroupBuilder
-
Returns the z distance
License requirements: cam_base ("CAM BASE")
.
- ZEBRA - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.Types2
-
Create zebra contour lines
- zEccentric - Variable in class nxopen.cae.BeamSectionOffsetOptions.Offset
-
- zEccentricity - Variable in class nxopen.cae.BeamSection.Properties
-
Offset measured from centroid to shear center in z-axis
- ZELEMENT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO - Static variable in class nxopen.annotations.TableCellStyleBuilder.ZeroDisplayType
-
- ZERO - Static variable in class nxopen.cae.AfuMathOperation.OuterInterpolation
-
Interpolates values with zero
- ZERO - Static variable in class nxopen.cae.CfdAutoRefinementConstraintBuilder.LocalSubdivisions
-
No local subdivision
- ZERO - Static variable in class nxopen.cae.CfdContactPreventionConstraintBuilder.LocalSubdivisions
-
- ZERO - Static variable in class nxopen.cae.CfdLocalResolutionConstraintBuilder.LocalSubdivisions
-
- ZERO - Static variable in class nxopen.cae.responsesimulation.InitialConditions.Type
-
- ZERO - Static variable in class nxopen.diagramming.tables.ZeroDisplay
-
Zero filled display
- ZERO - Static variable in class nxopen.pid.RotateAngleOption
-
0 degree.
- ZERO_CROSSINGS_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_AXIAL_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_AXIAL_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_BEAM_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_BEAM_STRAIN_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_DISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_ELEMENT_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_ELEMENT_RESULTANT_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_PRESSURE - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_REACTION_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_REACTION_FORCE_MPC - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_REACTION_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_REACTION_MOMENT_MPC - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_SHELL_RESULTANTS - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_SHELL_STRAIN_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_SPRING_DASHPOT_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_SPRING_DASHPOT_STRAIN_RESULTANT - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_TORSION_STRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_TORSION_STRESS - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGS_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGSE_ANGULAR_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGSE_ANGULAR_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGSE_APPLIED_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGSE_APPLIED_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_CROSSINGSE_ROTATION - Static variable in class nxopen.cae.Result.Quantity
-
- ZERO_DIMENSIONAL - Static variable in class nxopen.cae.Result.GroupContainer
-
- ZERO_DISPLAY_DASH - Static variable in class nxopen.uf.UFTabnot.ZeroDisplay
-
- ZERO_DISPLAY_EMPTY - Static variable in class nxopen.uf.UFTabnot.ZeroDisplay
-
- ZERO_DISPLAY_ZERO - Static variable in class nxopen.uf.UFTabnot.ZeroDisplay
-
- ZERO_FILL - Static variable in class nxopen.cae.ResultsCombinationBuilder.EvaluationError
-
- ZERO_FILL - Static variable in class nxopen.cae.ResultsCombinationBuilder.NoData
-
- ZERO_FILL - Static variable in class nxopen.cae.ResultsEnvelopeBuilder.NoData
-
- ZERO_FILL - Static variable in class nxopen.cae.ResultsReductionBuilder.EvaluationError
-
- ZERO_FILL - Static variable in class nxopen.cae.ResultsReductionBuilder.NoData
-
- ZERO_FILL - Static variable in class nxopen.cae.TransientResultsReductionBuilder.EvaluationError
-
- ZERO_FILL - Static variable in class nxopen.cae.TransientResultsReductionBuilder.NoData
-
- ZERO_LENGTH_LINE - Static variable in class nxopen.uf.UFConstants
-
- ZERO_TO_TWO_PI - Static variable in class nxopen.cae.xyplot.PhaseRangeOption
-
Displays phase between 0 and 360
- ZERO_VECTOR - Static variable in class nxopen.uf.UFConstants
-
- zeroDisplay() - Method in interface nxopen.annotations.TableCellStyleBuilder
-
Returns the zero display
License requirements: None.
- zeroDisplay() - Method in interface nxopen.diagramming.tables.CellSettingsBuilder
-
Returns the zero display of the cell settings.
- ZeroDisplay - Class in nxopen.diagramming.tables
-
Represents the cell zero display.
- zeroDisplay - Variable in class nxopen.uf.UFTabnot.CellPrefs
-
- zeroMeanCorrection() - Method in interface nxopen.cae.responsesimulation.EvaluationParameters
-
Returns the time-domain integration of acceleration excitations,
used in evaluating time responses to acceleration loads.
- zeroSlopeRadiusFunctionAtChainEnds() - Method in interface nxopen.features.EdgeBlendBuilder
-
Returns the zero slope radius function at chain ends option
License requirements: None.
- zeroThicknessColor() - Method in interface nxopen.cae.ThicknessBuilder
-
Returns the zero thickness color
License requirements: None.
- zerotol - Variable in class nxopen.cae.Post.ASCIIDiffTolerances
-
zero tolerance on any value
- zeroToleranceDisplayStyle() - Method in interface nxopen.annotations.AngularTolerance
-
Returns the zero tolerance display style
License requirements: None.
- zeroToleranceDisplayStyle() - Method in interface nxopen.annotations.DimensionPreferences
-
- zeroToleranceDisplayStyle() - Method in interface nxopen.annotations.LinearTolerance
-
Returns the zero tolerance display style
License requirements: None.
- ZeroToleranceDisplayStyle - Class in nxopen.annotations
-
Specifies the 0 tolerance display style
- zexpression() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
- zexpression() - Method in interface nxopen.motion.VObject
-
Returns the z component expression
License requirements: None.
- ZFrameBuilder - Interface in nxopen.features.shipdesign
-
- zframeEnum() - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
Returns the output option for the Longitudinal Z Frames
License requirements: None.
- zframeOption() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the Z-frame option.
- zfunction() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
- zfunction() - Method in interface nxopen.motion.VObject
-
Returns the z component function
License requirements: None.
- ZIG - Static variable in class nxopen.cam.CutParametersTraverseOpenPassesTypes
-
Maintain cut direction
- ZIG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Zig
- ZIG - Static variable in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes
-
Zig
- ZIG - Static variable in class nxopen.cam.DmBndBuilder.BndCutTraversalTypes
-
Zig
- ZIG - Static variable in class nxopen.cam.DmRadBuilder.RadCutMethodType
-
Zig
- ZIG - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutTraversalType
-
Zig
- ZIG - Static variable in class nxopen.cam.DPMItpBuilder.CutTypeOption
-
Zig cut type
- ZIG - Static variable in class nxopen.cam.fbm.FeatureGeometry.SequencePatternType
-
Pattern: Zig
- ZIG - Static variable in class nxopen.cam.InspectionMethodBuilder.PointSequenceModeTypes
-
Zig only
- ZIG - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarPointSequenceTypes
-
Zig only
- ZIG_CONTOUR - Static variable in class nxopen.cam.DmBndBuilder.BndCutTraversalTypes
-
Zig with Contour
- ZIG_WITH_CONTOUR - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Zig with Contour
- ZIG_WITH_STEPOVER - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Zig with Stepover
- ZIG_ZAG - Static variable in class nxopen.cam.CutParametersTraverseOpenPassesTypes
-
Alternate cut direction
- ZIG_ZAG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Zig Zag
- ZIG_ZAG - Static variable in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes
-
Zig-Zag
- ZIG_ZAG - Static variable in class nxopen.cam.DmBndBuilder.BndCutTraversalTypes
-
Zig-Zag
- ZIG_ZAG - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutTraversalType
-
Zig-Zag
- ZIG_ZAG - Static variable in class nxopen.cam.fbm.FeatureGeometry.SequencePatternType
-
Pattern: Zig Zag
- ZIG_ZAG - Static variable in class nxopen.cam.InspectionMethodBuilder.PointSequenceModeTypes
-
Zig and Zag
- ZIG_ZAG - Static variable in class nxopen.cam.InspectionMethodBuilder.PolarPointSequenceTypes
-
Zig and Zag
- ZIG_ZAG_DIR_ZAG - Static variable in class nxopen.uf.UFDrpos.ZigZagDir
-
- ZIG_ZAG_DIR_ZIG - Static variable in class nxopen.uf.UFDrpos.ZigZagDir
-
- ZIG_ZAG_LIFT - Static variable in class nxopen.cam.DmSurfBuilder.DmSurfCutTraversalType
-
Zig-Zag with Lift
- ZIG_ZAG_WITH_LIFTS - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Zig Zag with Lifts
- ZIG_ZAG_WITH_LIFTS - Static variable in class nxopen.cam.DmAmBuilder.AmCutTraversalTypes
-
Zig-Zag with Lifts
- ZIGZAG - Static variable in class nxopen.cam.DmRadBuilder.RadCutMethodType
-
Zig-Zag
- ZIGZAG - Static variable in class nxopen.cam.DPMItpBuilder.CutTypeOption
-
Zigzag cut type
- ZIGZAG_RAMP - Static variable in class nxopen.cam.NcmPlanarEngRetBuilder.EngRetTypes
-
ZigZag Ramp
- ZIGZAG_WITH_LIFTS - Static variable in class nxopen.cam.DPMItpBuilder.CutTypeOption
-
Zigzag with lift cut type
- ZIMAGINARY - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ComplexVectorType
-
- ZLABEL - Static variable in class nxopen.cae.xyplot.TextType
-
Z Axis name label
- zlaw() - Method in interface nxopen.features.LawCurveBuilder
-
Returns the z law
License requirements: None.
- zLevel - Variable in class nxopen.uf.UFCutLevels.Single
-
- ZLEVEL_HELICAL - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Zlevel Helical
- ZLEVEL_HOLDER_PARAM_CHANGE - Static variable in class nxopen.cam.CAMObject.Attr
-
- ZLEVEL_ZIG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Zlevel Zig
- ZLEVEL_ZIG_ZAG - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Zlevel Zig Zag
- ZLEVEL_ZIG_ZAG_WITH_LIFTS - Static variable in class nxopen.cam.CutPatternBuilder.Types
-
Zlevel Zig Zag with Lifts
- ZLevelMilling - Interface in nxopen.cam
-
Represents a Z Level Milling Operation
To create or edit an instance of this class, use
ZLevelMillingBuilder
Created in NX7.5.0
- ZLevelMillingBuilder - Interface in nxopen.cam
-
- ZM - Static variable in class nxopen.cam.fbm.FeatureGeometry.SequenceDirectionType
-
Direction: ZM
- ZM - Static variable in class nxopen.cam.GeometryGroup.DirectionTypes
-
derived blank direction using ZM
- ZM - Static variable in class nxopen.cam.MultiBladeGeomBuilder.PartAxisOfRotationTypes
-
+ZM
- ZM - Static variable in class nxopen.cam.NcmWedmBuilder.NonTiltLeadInTypes
-
non-tilt lead in type zm
- ZM - Static variable in class nxopen.cam.PartAxisBuilder.PartAxisOfRotationTypes
-
+ZM
- ZM - Static variable in class nxopen.cam.ProbeInspectPointMoveBuilder.Direction
-
ZM
- ZM - Static variable in class nxopen.cam.RotaryFinishGeomBuilder.PartAxisOfRotationTypes
-
+ZM
- ZM - Static variable in class nxopen.cam.SurfaceContourBuilder.AccessVectorMethodType
-
positive z-direction of MCS
- ZM - Static variable in class nxopen.cam.ToolPathTiltMachine.ToolMainMcsTypes
-
tool rotation MCS +ZM
- ZM - Static variable in class nxopen.cam.ToolPathTiltTilting.ReferenceTypes
-
Tool axis reference: +ZM
- ZM - Static variable in class nxopen.cam.WedmPointDefinitionBuilder.WireAxisStates
-
wire axis +zm
- ZM_XM - Static variable in class nxopen.cam.TurnOrientGeomBuilder.LatheWorkPlaneTypes
-
ZM/XM plane of the MCS
- ZM_XM_YM - Static variable in class nxopen.cam.LaserLinearMove.MoveTypes
-
ZM -> XM -> YM
- ZM_YM_XM - Static variable in class nxopen.cam.LaserLinearMove.MoveTypes
-
ZM -> YM -> XM
- zmass() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the percent mass of Z direction component
License requirements: mechanisms ("MECHANISMS")
.
- zmax() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the z max value.
- zmax() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the z max
License requirements: None.
- zmaxDatumFilter() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the z max datum filter
License requirements: None.
- zmaxOffset() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the z max offset
License requirements: None.
- zmin() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the z min value.
- zmin() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the z min
License requirements: None.
- zminDatumFilter() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the z min datum filter
License requirements: None.
- zminOffset() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the z min offset
License requirements: None.
- ZNEGATIVE - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.ViewDirectionType
-
- znum() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the z num
License requirements: None.
- ZNUMBER - Static variable in class nxopen.cae.xyplot.TextType
-
Z Axis number label
- zoff - Variable in class nxopen.uf.UFCutter.TrackingPointData
-
- zoffset - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskShellData
-
Z offset value.
- zoffset() - Method in interface nxopen.cae.Mesh0dBuilder
-
Returns the z-offset from cg of the lumped mass element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- zoffset - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
-
the zoffset
- zoffset - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the zoffset
- zoffset() - Method in interface nxopen.cam.RotateToolMoveBuilder
-
Returns the Z offset
License requirements: None.
- zoffset() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool Zoffset builder
License requirements: None.
- zoffsetenda - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Z offset to shear center in nodal displacement coordinate system for End A in units mm or in.
- zoffsetendb - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Z offset to shear center in nodal displacement coordinate system for End B in units mm or in.
- zoffsetExpression() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the zoffset expression of the shell element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- zoffsetState() - Method in interface nxopen.cae.ShellEADBuilder
-
Returns the zoffset state drives the action upon commit
License requirements: nx_masterfem ("Finite Element Modeling")
.
- zoffsetToggle() - Method in interface nxopen.cam.RotateToolMoveBuilder
-
Returns the Z offset Toggle Status
License requirements: None.
- zoffsetToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool Zoffset toggle
License requirements: None.
- zoffsetused - Variable in class nxopen.cam.MillingTrackpointBuilder.Data
-
the zoffset toggle
- zoffsetused - Variable in class nxopen.cam.MillingTrackpointBuilder.TrackPointData
-
the zoffset toggle
- zoffsetValue - Variable in class nxopen.uf.UFPath.ToolChange
-
- zoffStatus - Variable in class nxopen.uf.UFCutter.TrackingPointData
-
- ZONE - Static variable in class nxopen.drawings.ReferenceShowTypes
-
- ZONE - Static variable in class nxopen.linedesigner.CreateFactoryElementBuilder.TypeAPI
-
Represents the Zone type
- ZONE - Static variable in class nxopen.linedesigner.DBFactoryNode.NodeType
-
- zoneDistance() - Method in interface nxopen.features.vehicledesign.HeadImpactBuilder
-
Returns the exclusion zone distance for this head impact study.
- zoneList - Variable in class nxopen.uf.UFFltr.AutoCreateBoxZonesData
-
- zoneList - Variable in class nxopen.uf.UFFltr.AutoCreatePlaneZonesData
-
- zoneName - Variable in class nxopen.HumanReachZone.Data
-
Name of the reach zone
- ZoneOrigin - Class in nxopen.diagramming
-
the zone origin
- ZoneOrigin - Class in nxopen.drawings
-
the zone origin
- zonePoint() - Method in interface nxopen.features.AssociativeArcBuilder
-
Returns the zone point is required when arc has multiple solutions in following conditions:
1.
- zoneShape() - Method in interface nxopen.annotations.FeatureControlFrameDataBuilder
-
Returns the zone shape
License requirements: None.
- zoneShape - Variable in class nxopen.uf.UFGdt.ToleranceZone
-
- zoneShapeType() - Method in interface nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder
-
Returns the zone shape enum
License requirements: None.
- zoom(View.ScaleFactor) - Method in interface nxopen.View
-
Scales the specified view to a desired relative scale.
- ZOOM_FACTOR - Static variable in class nxopen.annotations.PmiResizeMethod
-
- zoomAboutPoint(double, Point3d, Point3d) - Method in interface nxopen.View
-
Scales the specified view such that the given scale_about_point does not move.
- zoomAlongX(double, double) - Method in interface nxopen.cae.xyplot.Graph
-
Zooms the graph along X direction by a scale range basing on current X axis display range.
- zoomAlongXY(double, double, double, double) - Method in interface nxopen.cae.xyplot.Graph
-
Zooms the graph along both X and Y direction by scale ranges basing on current X and Y axis display range.
- zoomAlongY(double, double) - Method in interface nxopen.cae.xyplot.Graph
-
Zooms the graph along Y direction by a scale range basing on current Y axis display range.
- zoomAlongZ(double, double) - Method in interface nxopen.cae.xyplot.Graph
-
Zooms the graph along Z direction by a scale range basing on current Z axis display range.
- zoomByRectangle(Point3d, Point3d) - Method in interface nxopen.View
-
Scales the specified view such that the specified rectangle is as large
as possible while being fully contained within the viewport.
- zoomScale() - Method in interface nxopen.geometricanalysis.FaceAnalysisDataRangeBuilder
-
Returns the zoom scale.
- zoomSensitivity() - Method in interface nxopen.display.NonProportionalZoom
-
Returns the sensitivity of the zoom relative to the length of the drawn line
License requirements: None.
- zoomView(Tag, double) - Method in interface nxopen.uf.UFView
-
- zoption() - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
Returns the z option
License requirements: None.
- zoutput() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the Z output
License requirements: None.
- ZPOSITIVE - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.ViewDirectionType
-
- zprofile() - Method in interface nxopen.motion.VObject
-
Returns the z profile
License requirements: None.
- ZREACTION_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- ZREACTION_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- ZREAL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ComplexVectorType
-
- zrefValue() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the Z value of the blank origin in the current machine set coordinator.
- ZROTATION - Static variable in class nxopen.cae.Result.Quantity
-
- zrotationDOFMode() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the z rotation dofmode
License requirements: None.
- zrotationLowerLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the z rotation lower limit
License requirements: None.
- zrotationUpperLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the z rotation upper limit
License requirements: None.
- zscaleFactor() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the z scale factor
License requirements: None.
- zsegmentOriginCoord() - Method in interface nxopen.motion.RoadBuilder
-
Returns the z origin coord for the segments for the road object of type path
License requirements: mechanisms ("MECHANISMS")
.
- zsegments() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the number of segments in Z direction.
- zstiffnessConstant() - Method in interface nxopen.cae.connections.IStiffness
-
Returns the Z stiffness constant
License requirements: None.
- zstiffnessDynamic() - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
Returns the Z stiffness dynamic
License requirements: None.
- zstructuralDampingConstant() - Method in interface nxopen.cae.connections.IStructuralDamping
-
Returns the Z structural damping constant
License requirements: None.
- zstructuralDampingDynamic() - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
Returns the Z structural damping dynamic
License requirements: None.
- zsumInteger() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
Returns the z sum integer
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- ztDatumLetter() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the zt datum letter
License requirements: None.
- ztDistance() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the zt distance
License requirements: None.
- ztFeature() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the zt feature
License requirements: None.
- ztFeatureSelect() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the zt feature select
License requirements: None.
- ztMethod() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the zt method
License requirements: None.
- ztranslationDOFMode() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the z translation dofmode
License requirements: None.
- ztranslationLowerLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the z translation lower limit
License requirements: None.
- ztranslationUpperLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the z translation upper limit
License requirements: None.
- ZU - Static variable in class nxopen.features.sheetmetal.BridgeTransitionBuilder.TypeOptions
-
Bridge Transition type consisting of Bend-Planar-Bend regions.
- zuEndEdgeBendOptions() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
- zuStartEdgeBendOptions() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
- zval - Variable in class nxopen.uf.UFSim.AskInitJunctionXformData
-
- zval - Variable in class nxopen.uf.UFSim.AskJunctionXformData
-
- zval - Variable in class nxopen.uf.UFSim.AskToolOffsetsData
-
- zval - Variable in class nxopen.uf.UFSim.TransformOffsetAcsToMtcsData
-
- zvalue() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the edge length in Z direction for general box.
- zvalue() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the edge length in Z direction for general box.
- zValues - Variable in class nxopen.cae.AfuData.ComplexData
-
Ordinate element data values for imaginary part or phase part
- zValues - Variable in class nxopen.cae.AfuDataConvertor.FftFrequencyData
-
Imaginary part of Y values of the output data
- zVec(double[]) - Method in interface nxopen.uf.UFMtx3
-
- zVec(double[]) - Method in interface nxopen.uf.UFMtx4
-
- zviscousDampingConstant() - Method in interface nxopen.cae.connections.IViscousDamping
-
Returns the Z viscous damping constant
License requirements: None.
- zviscousDampingDynamic() - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
Returns the Z viscous damping dynamic
License requirements: None.
- ZX - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
ZX component of a tensor
- ZX - Static variable in class nxopen.cae.Result.Component
-
- ZX - Static variable in class nxopen.cam.RotaryPolarMoveBuilder.LockPlaneType
-
ZX-Plane
- ZX - Static variable in class nxopen.features.DatumPlaneBuilder.FixedType
-
Fixed datum plane thru ZX plane
- ZX - Static variable in class nxopen.features.TabNoteCfgBuilder.Refplane
-
2 : Zc-Xc plane
- ZX - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- ZX - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TensorType
-
- ZX - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlaneOptions
-
Uses XC-ZC plane as light plane
- zx - Variable in class nxopen.Matrix3x3
-
- ZX - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices
-
Deprecated.
ZX
- ZX - Static variable in class nxopen.sim.KinematicChain.CoordinatePlaneTypes
-
ZX
- ZX_PLANE - Static variable in class nxopen.cae.BaseFemPart.AxisymAbstractionType
-
ZX plane - Z axis axisymmetric elements are allowed
- ZX_PLANE - Static variable in class nxopen.cae.SimSimulation.AxisymAbstractionType
-
ZX plane - Z axis axisymmetric elements are allowed
- zxGridStyle() - Method in interface nxopen.cae.xyplot.GridLayoutStyle3DSetting
-
Returns the grid style of ZX plane
License requirements: None.
- ZXSTRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ZXSTRESS - Static variable in class nxopen.cae.Result.Quantity
-
- ZXY - Static variable in class nxopen.cae.xyplot.CoordinateType
-
swap x and y firstly and then swap X and z
- ZXY - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.TraversalOrder
-
- ZXY - Static variable in class nxopen.routing.HealMethod
-
- ZY - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
ZY component of a tensor
- zy - Variable in class nxopen.Matrix3x3
-
- zyGridStyle() - Method in interface nxopen.cae.xyplot.GridLayoutStyle3DSetting
-
Returns the grid style of ZY plane
License requirements: None.
- ZYX - Static variable in class nxopen.cae.xyplot.CoordinateType
-
swap x and z
- ZYX - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.TraversalOrder
-
- ZYX - Static variable in class nxopen.routing.HealMethod
-
- ZZ - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
ZZ component of a tensor
- ZZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- ZZ - Static variable in class nxopen.cae.Result.Component
-
- ZZ - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- ZZ - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TensorType
-
- zz - Variable in class nxopen.Matrix3x3
-
- ZZSTRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- ZZSTRESS - Static variable in class nxopen.cae.Result.Quantity
-