public interface RoughFinishTurningBuilder extends TurningOperationBuilder
Modifier and Type | Interface and Description |
---|---|
static class |
RoughFinishTurningBuilder.CustomMemberDataTypes
the Custom Member Data types .
|
static class |
RoughFinishTurningBuilder.CutRegionsTypes
the Cut regions types .
|
static class |
RoughFinishTurningBuilder.ExtendModeTypes
the Extend Mode types .
|
static class |
RoughFinishTurningBuilder.MaximumAreaModes
the Maximum Area modes .
|
static class |
RoughFinishTurningBuilder.MinimumAreaTypes
the Mininmum Area types .
|
static class |
RoughFinishTurningBuilder.MinmaxAreaUnits
the Minimum/Maximum Area units .
|
static class |
RoughFinishTurningBuilder.MinmaxSizeModes
the Maximum/Maximum Size modes .
|
static class |
RoughFinishTurningBuilder.MinmaxSizeUnits
the Minimum/Maximum Size Axial/Radial units .
|
static class |
RoughFinishTurningBuilder.MultiChannelTurningModeTypes
the multi-channel turning mode types .
|
static class |
RoughFinishTurningBuilder.RegionMachiningTypes
the Region Machining types .
|
static class |
RoughFinishTurningBuilder.RegionSelectionTypes
the Region Selection types
|
static class |
RoughFinishTurningBuilder.ToleranceOffsetTypes
the Tolerance Offset types
|
TurningOperationBuilder.MotionOutputOptions, TurningOperationBuilder.ReorientToolHolderModeOptions, TurningOperationBuilder.TrackingPointType
OperationBuilder.HoleAxisTypes, OperationBuilder.HoleDepthTypes, OperationBuilder.OptimizationBasedOnTypes, OperationBuilder.OptimizationDistanceTypes, OperationBuilder.OptimizationLevelTypes
ParamBuilder.OptimizationTypes
Modifier and Type | Method and Description |
---|---|
TrimPlane |
axialTrimPlane1()
Returns the axial trim plane 1
License requirements: None. |
TrimPlane |
axialTrimPlane2()
Returns the axial trim plane 2
License requirements: None. |
RoughFinishTurningBuilder.CustomMemberDataTypes |
customMemberData()
Returns the Custom Member Data type
License requirements: None. |
double |
customMemberDataDistance()
Returns the Custom Member Data Distance
License requirements: None. |
Boundary |
customPartBoundary()
Returns the custom part boundary builder
License requirements: None. |
TurnCutParameters |
cutParameters()
Returns the cut parameter object
License requirements: None. |
RoughFinishTurningBuilder.CutRegionsTypes |
cutRegions()
Returns the Cut regions type
License requirements: None. |
double |
endAngle()
Returns the end angle
License requirements: None. |
double |
endOffset()
Returns the end offset
License requirements: None. |
RoughFinishTurningBuilder.ExtendModeTypes |
extendMode()
Returns the Extend Mode
License requirements: None. |
boolean |
ignoreMinimumBoringDiameter()
Returns the Ignore Minimum Boring Diameter toggle
License requirements: None. |
CutAngle |
levelAngleBuilder()
Returns the Level Angle
License requirements: None. |
RoughFinishTurningBuilder.MaximumAreaModes |
maximumAreaMode()
Returns the Maximum Area mode
License requirements: None. |
double |
maximumAreaSize()
Returns the Maximum Area Size
License requirements: None. |
RoughFinishTurningBuilder.MinmaxAreaUnits |
maximumAreaUnit()
Returns the Maximum Area Unit
License requirements: None. |
InheritableToolDepBuilder |
maximumSizeAxial()
Returns the Maximum Size Axial
License requirements: None. |
RoughFinishTurningBuilder.MinmaxSizeModes |
maximumSizeMode()
Returns the Maximum Size Mode
License requirements: None. |
InheritableToolDepBuilder |
maximumSizeRadial()
Returns the Maximum Size Radial
License requirements: None. |
RoughFinishTurningBuilder.MinimumAreaTypes |
minimumArea()
Returns the Minimum Area type
License requirements: None. |
double |
minimumAreaSize()
Returns the Minimum Area Size
License requirements: None. |
RoughFinishTurningBuilder.MinmaxAreaUnits |
minimumAreaUnit()
Returns the Minimum Area Unit
License requirements: None. |
InheritableToolDepBuilder |
minimumSizeAxial()
Returns the Minimum Size Axial
License requirements: None. |
RoughFinishTurningBuilder.MinmaxSizeModes |
minimumSizeMode()
Returns the Minimum Size Mode
License requirements: None. |
InheritableToolDepBuilder |
minimumSizeRadial()
Returns the Minimum Size Radial
License requirements: None. |
double |
multiChannelTurningLeadDistance()
Returns the multi-channel turning lead distance
License requirements: None. |
RoughFinishTurningBuilder.MultiChannelTurningModeTypes |
multiChannelTurningMode()
Returns the multi-channel turning mode
License requirements: None. |
Tool |
multiChannelTurningSecondTool()
Returns the multi-channel turning second tool
License requirements: None. |
boolean |
omitReversals()
Returns the Omit Reversals toggle
License requirements: None. |
TrimPlane |
radialTrimPlane1()
Returns the radial trim plane 1
License requirements: None. |
TrimPlane |
radialTrimPlane2()
Returns the radial trim plane 2
License requirements: None. |
RoughFinishTurningBuilder.RegionMachiningTypes |
regionMachining()
Returns the Region Machining type
License requirements: None. |
RoughFinishTurningBuilder.RegionSelectionTypes |
regionSelection()
Returns the Region Selection type
License requirements: None. |
Point |
regionSelectionPoint()
Returns the Region Selection Point
License requirements: None. |
void |
setCustomMemberData(RoughFinishTurningBuilder.CustomMemberDataTypes surfaceSensitivityMode)
License requirements: cam_base ("CAM BASE") . |
void |
setCustomMemberDataDistance(double surfaceSensitivityTolerance)
License requirements: cam_base ("CAM BASE") . |
void |
setCutRegions(RoughFinishTurningBuilder.CutRegionsTypes multipleCutRegions)
License requirements: cam_base ("CAM BASE") . |
void |
setEndAngle(double endAngle)
License requirements: cam_base ("CAM BASE") . |
void |
setEndOffset(double endOffset)
License requirements: cam_base ("CAM BASE") . |
void |
setExtendMode(RoughFinishTurningBuilder.ExtendModeTypes tangentialStartEndExtension)
License requirements: cam_base ("CAM BASE") . |
void |
setIgnoreMinimumBoringDiameter(boolean ignoreMinBoringDia)
License requirements: cam_base ("CAM BASE") . |
void |
setMaximumAreaMode(RoughFinishTurningBuilder.MaximumAreaModes maximumAreaMode)
License requirements: cam_base ("CAM BASE") . |
void |
setMaximumAreaSize(double maxSize)
License requirements: cam_base ("CAM BASE") . |
void |
setMaximumAreaUnit(RoughFinishTurningBuilder.MinmaxAreaUnits maxAreaUnit)
License requirements: cam_base ("CAM BASE") . |
void |
setMaximumSizeMode(RoughFinishTurningBuilder.MinmaxSizeModes maximumSizeMode)
License requirements: cam_base ("CAM BASE") . |
void |
setMinimumArea(RoughFinishTurningBuilder.MinimumAreaTypes minimumAreaActive)
License requirements: cam_base ("CAM BASE") . |
void |
setMinimumAreaSize(double minArea)
License requirements: cam_base ("CAM BASE") . |
void |
setMinimumAreaUnit(RoughFinishTurningBuilder.MinmaxAreaUnits minAreaUnit)
License requirements: cam_base ("CAM BASE") . |
void |
setMinimumSizeMode(RoughFinishTurningBuilder.MinmaxSizeModes minimumSizeMode)
License requirements: cam_base ("CAM BASE") . |
void |
setMultiChannelTurningLeadDistance(double multiChannelTurningLeadDistance)
License requirements: cam_base ("CAM BASE") . |
void |
setMultiChannelTurningMode(RoughFinishTurningBuilder.MultiChannelTurningModeTypes multiChannelTurningMode)
License requirements: cam_base ("CAM BASE") . |
void |
setMultiChannelTurningSecondTool(Tool multiChannelTurningSecondTool)
License requirements: None. |
void |
setOmitReversals(boolean omitReversals)
License requirements: cam_base ("CAM BASE") . |
void |
setRegionMachining(RoughFinishTurningBuilder.RegionMachiningTypes regionMachining)
License requirements: cam_base ("CAM BASE") . |
void |
setRegionSelection(RoughFinishTurningBuilder.RegionSelectionTypes cutRegionSelectionMode)
License requirements: cam_base ("CAM BASE") . |
void |
setRegionSelectionPoint(Point cutRegionSelectionPoint)
License requirements: cam_base ("CAM BASE") . |
void |
setStartAngle(double startAngle)
License requirements: cam_base ("CAM BASE") . |
void |
setStartOffset(double startOffset)
License requirements: cam_base ("CAM BASE") . |
void |
setToleranceOffset(RoughFinishTurningBuilder.ToleranceOffsetTypes toleranceOffsetMode)
License requirements: cam_base ("CAM BASE") . |
double |
startAngle()
Returns the start angle
License requirements: None. |
double |
startOffset()
Returns the Start Offset
License requirements: None. |
CutAngle |
stepAngleBuilder()
Returns the Step Angle
License requirements: None. |
RoughFinishTurningBuilder.ToleranceOffsetTypes |
toleranceOffset()
Returns the Tolerance Offset type
License requirements: None. |
TrimPoint |
trimPoint1()
Returns the trim point 1
License requirements: None. |
TrimPoint |
trimPoint2()
Returns the trim point 2
License requirements: None. |
additionalCommands, feedsBuilder, flipToolAroundHolder, machineCycleSubroutineName, motionOutput, reorientToolHolder, reorientToolHolderMode, rotateTrackingPoint, setAdditionalCommands, setFlipToolAroundHolder, setMachineCycleSubroutineName, setMotionOutput, setReorientToolHolder, setReorientToolHolderMode, setRotateTrackingPoint, setTrackingPointStatus, setUpdateIpw, setUseMachineCycle, toolHolderAngle, trackingPointStatus, updateIpw, useMachineCycle
channelName, description, endOfPath, endUdeSet, geometry, getHoleAxisValues, gougeChecking, holeAxisType, holeDepth, holeDepthType, layoutAndLayer, motionOutputBuilder, notes, optimizationBasedOn, optimizationDistanceMethod, optimizationLevel, pathDisplayOptions, postToolPathExit, retractDistance, retractDistanceOnToolAxisChange, safeClearance, selectToolFlag, setChannelName, setDescription, setGougeChecking, setHoleAxisType, setHoleAxisValues, setHoleDepthType, setOptimizationBasedOn, setOptimizationDistanceMethod, setOptimizationLevel, setPostToolPathExit, setSelectToolFlag, startOfPath, startUdeSet, toolChangeSetting, toolPathEditor, toolPathSplitParametersBuilder
cycleEvent, cycleTable, getCustomizableItemBuilder, getCustomizableItemNames, optimizationMethod, setOptimizationMethod
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
RoughFinishTurningBuilder.MultiChannelTurningModeTypes multiChannelTurningMode() throws NXException, RemoteException
NXException
RemoteException
void setMultiChannelTurningMode(RoughFinishTurningBuilder.MultiChannelTurningModeTypes multiChannelTurningMode) throws NXException, RemoteException
multiChannelTurningMode
- the multi-channel turning modeNXException
RemoteException
double multiChannelTurningLeadDistance() throws NXException, RemoteException
NXException
RemoteException
void setMultiChannelTurningLeadDistance(double multiChannelTurningLeadDistance) throws NXException, RemoteException
multiChannelTurningLeadDistance
- the multi-channel turning lead distanceNXException
RemoteException
Tool multiChannelTurningSecondTool() throws NXException, RemoteException
NXException
RemoteException
void setMultiChannelTurningSecondTool(Tool multiChannelTurningSecondTool) throws NXException, RemoteException
multiChannelTurningSecondTool
- the multi-channel turning second toolNXException
RemoteException
boolean omitReversals() throws NXException, RemoteException
NXException
RemoteException
void setOmitReversals(boolean omitReversals) throws NXException, RemoteException
omitReversals
- the omit reversalsNXException
RemoteException
boolean ignoreMinimumBoringDiameter() throws NXException, RemoteException
NXException
RemoteException
void setIgnoreMinimumBoringDiameter(boolean ignoreMinBoringDia) throws NXException, RemoteException
ignoreMinBoringDia
- the Ignore Minimum Boring DiameterNXException
RemoteException
TrimPlane radialTrimPlane1() throws NXException, RemoteException
NXException
RemoteException
TrimPlane radialTrimPlane2() throws NXException, RemoteException
NXException
RemoteException
TrimPlane axialTrimPlane1() throws NXException, RemoteException
NXException
RemoteException
TrimPlane axialTrimPlane2() throws NXException, RemoteException
NXException
RemoteException
TrimPoint trimPoint1() throws NXException, RemoteException
NXException
RemoteException
TrimPoint trimPoint2() throws NXException, RemoteException
NXException
RemoteException
RoughFinishTurningBuilder.CustomMemberDataTypes customMemberData() throws NXException, RemoteException
NXException
RemoteException
void setCustomMemberData(RoughFinishTurningBuilder.CustomMemberDataTypes surfaceSensitivityMode) throws NXException, RemoteException
surfaceSensitivityMode
- the custom member data typeNXException
RemoteException
double customMemberDataDistance() throws NXException, RemoteException
NXException
RemoteException
void setCustomMemberDataDistance(double surfaceSensitivityTolerance) throws NXException, RemoteException
surfaceSensitivityTolerance
- the custom member data distanceNXException
RemoteException
RoughFinishTurningBuilder.ToleranceOffsetTypes toleranceOffset() throws NXException, RemoteException
NXException
RemoteException
void setToleranceOffset(RoughFinishTurningBuilder.ToleranceOffsetTypes toleranceOffsetMode) throws NXException, RemoteException
toleranceOffsetMode
- the tolerance offset typeNXException
RemoteException
RoughFinishTurningBuilder.RegionSelectionTypes regionSelection() throws NXException, RemoteException
NXException
RemoteException
void setRegionSelection(RoughFinishTurningBuilder.RegionSelectionTypes cutRegionSelectionMode) throws NXException, RemoteException
cutRegionSelectionMode
- the region selection typeNXException
RemoteException
Point regionSelectionPoint() throws NXException, RemoteException
NXException
RemoteException
void setRegionSelectionPoint(Point cutRegionSelectionPoint) throws NXException, RemoteException
cutRegionSelectionPoint
- the region selection pointNXException
RemoteException
RoughFinishTurningBuilder.RegionMachiningTypes regionMachining() throws NXException, RemoteException
NXException
RemoteException
void setRegionMachining(RoughFinishTurningBuilder.RegionMachiningTypes regionMachining) throws NXException, RemoteException
regionMachining
- the Region Machining typeNXException
RemoteException
RoughFinishTurningBuilder.CutRegionsTypes cutRegions() throws NXException, RemoteException
NXException
RemoteException
void setCutRegions(RoughFinishTurningBuilder.CutRegionsTypes multipleCutRegions) throws NXException, RemoteException
multipleCutRegions
- the Cut regions typeNXException
RemoteException
RoughFinishTurningBuilder.MinimumAreaTypes minimumArea() throws NXException, RemoteException
NXException
RemoteException
void setMinimumArea(RoughFinishTurningBuilder.MinimumAreaTypes minimumAreaActive) throws NXException, RemoteException
minimumAreaActive
- the minimum area typeNXException
RemoteException
double minimumAreaSize() throws NXException, RemoteException
NXException
RemoteException
void setMinimumAreaSize(double minArea) throws NXException, RemoteException
minArea
- the minimum area sizeNXException
RemoteException
RoughFinishTurningBuilder.MinmaxAreaUnits minimumAreaUnit() throws NXException, RemoteException
NXException
RemoteException
void setMinimumAreaUnit(RoughFinishTurningBuilder.MinmaxAreaUnits minAreaUnit) throws NXException, RemoteException
minAreaUnit
- the minimum area unitNXException
RemoteException
RoughFinishTurningBuilder.MaximumAreaModes maximumAreaMode() throws NXException, RemoteException
NXException
RemoteException
void setMaximumAreaMode(RoughFinishTurningBuilder.MaximumAreaModes maximumAreaMode) throws NXException, RemoteException
maximumAreaMode
- the maximum area modeNXException
RemoteException
double maximumAreaSize() throws NXException, RemoteException
NXException
RemoteException
void setMaximumAreaSize(double maxSize) throws NXException, RemoteException
maxSize
- the maximum sizeNXException
RemoteException
RoughFinishTurningBuilder.MinmaxAreaUnits maximumAreaUnit() throws NXException, RemoteException
NXException
RemoteException
void setMaximumAreaUnit(RoughFinishTurningBuilder.MinmaxAreaUnits maxAreaUnit) throws NXException, RemoteException
maxAreaUnit
- the maximum area unitNXException
RemoteException
RoughFinishTurningBuilder.MinmaxSizeModes minimumSizeMode() throws NXException, RemoteException
NXException
RemoteException
void setMinimumSizeMode(RoughFinishTurningBuilder.MinmaxSizeModes minimumSizeMode) throws NXException, RemoteException
minimumSizeMode
- the minimum size modeNXException
RemoteException
InheritableToolDepBuilder minimumSizeAxial() throws NXException, RemoteException
NXException
RemoteException
InheritableToolDepBuilder minimumSizeRadial() throws NXException, RemoteException
NXException
RemoteException
RoughFinishTurningBuilder.MinmaxSizeModes maximumSizeMode() throws NXException, RemoteException
NXException
RemoteException
void setMaximumSizeMode(RoughFinishTurningBuilder.MinmaxSizeModes maximumSizeMode) throws NXException, RemoteException
maximumSizeMode
- the maximum size modeNXException
RemoteException
InheritableToolDepBuilder maximumSizeAxial() throws NXException, RemoteException
NXException
RemoteException
InheritableToolDepBuilder maximumSizeRadial() throws NXException, RemoteException
NXException
RemoteException
double startOffset() throws NXException, RemoteException
NXException
RemoteException
void setStartOffset(double startOffset) throws NXException, RemoteException
startOffset
- the start offsetNXException
RemoteException
double endOffset() throws NXException, RemoteException
NXException
RemoteException
void setEndOffset(double endOffset) throws NXException, RemoteException
endOffset
- the end offsetNXException
RemoteException
double startAngle() throws NXException, RemoteException
NXException
RemoteException
void setStartAngle(double startAngle) throws NXException, RemoteException
startAngle
- the start angleNXException
RemoteException
double endAngle() throws NXException, RemoteException
NXException
RemoteException
void setEndAngle(double endAngle) throws NXException, RemoteException
endAngle
- the end angleNXException
RemoteException
RoughFinishTurningBuilder.ExtendModeTypes extendMode() throws NXException, RemoteException
NXException
RemoteException
void setExtendMode(RoughFinishTurningBuilder.ExtendModeTypes tangentialStartEndExtension) throws NXException, RemoteException
tangentialStartEndExtension
- the extend mode typeNXException
RemoteException
CutAngle levelAngleBuilder() throws NXException, RemoteException
NXException
RemoteException
CutAngle stepAngleBuilder() throws NXException, RemoteException
NXException
RemoteException
TurnCutParameters cutParameters() throws NXException, RemoteException
NXException
RemoteException
Boundary customPartBoundary() throws NXException, RemoteException
NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.