public interface FilletBuilder extends FeatureBuilder
Fillet
builder. WeldManager.createFilletBuilder(nxopen.features.Feature)
Property | Value |
---|---|
AddCosmeticEnd | 0 |
AllowBroken | 0 |
AssignWeldPMI | 0 |
Associative | 1 |
ContourHeight.Value | 1.875 (millimeters part), .073818 (inches part) |
ContourType | None |
EnumMethod | NumberLength |
ExtendEdges | Manual |
ExtensionDistance.Value | 0.0254 (millimeters part), 0.001 (inches part) |
ExtensionMethod | Automatic |
FaceFillGapDistance | 0.0 (millimeters part), 0.0 (inches part) |
FieldWeld | 0 |
FillFaceHoles | None |
FilletType | T |
FirstLeg.Value | 6.25 (millimeters part), .246062 (inches part) |
NumberOfWelds.Value | 3 |
SecondLeg.Value | 6.25 (millimeters part), .246062 (inches part) |
SegmentLength.Value | 3 (millimeters part), .118110 (inches part) |
Spacing.Value | 3 (millimeters part), .118110 (inches part) |
ThroatThickToggle | 0 |
ToggleCreateSkipWelds | 0 |
ToggleRecreateDeletedWelds | 0 |
Modifier and Type | Interface and Description |
---|---|
static class |
FilletBuilder.EnumConstructionMethod
the options for which construction method to use.
|
static class |
FilletBuilder.EnumContour
the Contour enum.
|
static class |
FilletBuilder.EnumExtendEdges
the options for populating the edge selections.
|
static class |
FilletBuilder.EnumExtensionMethod
the Extension enum.
|
static class |
FilletBuilder.EnumFillFaceHolesType
the fill method to be applied.
|
static class |
FilletBuilder.EnumSkipWeldMethod
the Skipweld enum.
|
static class |
FilletBuilder.EnumWeldingType
the WeldingType enum.
|
Modifier and Type | Method and Description |
---|---|
boolean |
addCosmeticEnd()
Returns the value identify if a cosmtic end should be added to each end of the fillet.
|
boolean |
allowBroken()
Returns the toggle to allow broken link.
|
boolean |
assignWeldPMI()
Returns the toggle to assign weld pmi.
|
boolean |
associative()
Returns the value identify if WAVE links should remain unbroken.
|
FilletBuilder.EnumConstructionMethod |
constructionMethod()
Returns the value for determining the construction method.
|
Expression |
contourHeight()
Returns the linear dimension contour height.
|
FilletBuilder.EnumContour |
contourType()
Returns the contour.
|
boolean |
directionVector1()
Returns the face normal direction.
|
boolean |
directionVector2()
Returns the face normal direction for the second face.
|
boolean |
directToggle()
Returns the toggle to change direction.
|
double |
distTolerance()
Returns the distance tolerance.
|
Section |
edgeSet1()
Returns the edge set1.
|
Section |
edgeSet2()
Returns the edge set2.
|
OnPathDimensionBuilder |
endDist()
Returns the on path dimension end distance.
|
boolean |
endVector()
Returns the end direction reversed or not.
|
FilletBuilder.EnumSkipWeldMethod |
enumMethod()
Returns the enum method for skip welds.
|
FilletBuilder.EnumExtendEdges |
extendEdges()
Returns the value for how to populate the edge sets.
|
Expression |
extensionDistance()
Returns the linear dimension extension distance.
|
FilletBuilder.EnumExtensionMethod |
extensionMethod()
Returns the extension method.
|
double |
faceFillGapDistance()
Returns the distance the fillet will span when there are gaps in the sheet definition.
|
ScCollector |
faceSet1()
Returns the face set1.
|
ScCollector |
faceSet2()
Returns the face set2.
|
boolean |
fieldWeld()
Returns the field weld.
|
FilletBuilder.EnumWeldingType |
filletType()
Returns the fillet type.
|
FilletBuilder.EnumFillFaceHolesType |
fillFaceHoles()
Returns the value to identify if the face set should be filled during construction.
|
Expression |
firstLeg()
Returns the linear dimension first leg.
|
Expression |
numberOfWelds()
Returns the expression number indicates number of welds in skip welds.
|
NXObject |
pmi()
Returns the pmi symbol.
|
Expression |
secondLeg()
Returns the linear dimension second leg.
|
Face |
seedFace1()
Returns the first seed face.
|
Face |
seedFace2()
Returns the second seed face.
|
Point3d |
seedPoint1()
Returns the point on the first face.
|
Point3d |
seedPoint2()
Returns the point on the second face.
|
Expression |
segmentLength()
Returns the linear dimension length indicates segment length for each weld.
|
void |
setAddCosmeticEnd(boolean addCosmeticEnd)
License requirements: ugweld ("UG WELD") . |
void |
setAllowBroken(boolean allowBroken)
License requirements: ugweld ("UG WELD") . |
void |
setAssignWeldPMI(boolean assignWeldPMI)
License requirements: ugweld ("UG WELD") . |
void |
setAssociative(boolean associative)
License requirements: ugweld ("UG WELD") . |
void |
setConstructionMethod(FilletBuilder.EnumConstructionMethod constructionMethod)
License requirements: ugweld ("UG WELD") . |
void |
setContourType(FilletBuilder.EnumContour contour)
License requirements: ugweld ("UG WELD") . |
void |
setDirectionVector1(boolean directionVector1)
License requirements: ugweld ("UG WELD") . |
void |
setDirectionVector2(boolean directionVector2)
License requirements: ugweld ("UG WELD") . |
void |
setDirectToggle(boolean directToggle)
License requirements: ugweld ("UG WELD") . |
void |
setDistTolerance(double distTolerance)
License requirements: ugweld ("UG WELD") . |
void |
setEndVector(boolean endVector)
License requirements: ugweld ("UG WELD") . |
void |
setEnumMethod(FilletBuilder.EnumSkipWeldMethod enumMethod)
License requirements: ugweld ("UG WELD") . |
void |
setExtendEdges(FilletBuilder.EnumExtendEdges extendEdges)
License requirements: ugweld ("UG WELD") . |
void |
setExtensionMethod(FilletBuilder.EnumExtensionMethod extensionMethod)
License requirements: ugweld ("UG WELD") . |
void |
setFaceFillGapDistance(double faceFillGapDistance)
License requirements: ugweld ("UG WELD") . |
void |
setFieldWeld(boolean fieldWeld)
License requirements: ugweld ("UG WELD") . |
void |
setFilletType(FilletBuilder.EnumWeldingType filletType)
License requirements: ugweld ("UG WELD") . |
void |
setFillFaceHoles(FilletBuilder.EnumFillFaceHolesType fillFaceHolesType)
License requirements: ugweld ("UG WELD") . |
void |
setPmi(NXObject pmi)
License requirements: ugweld ("UG WELD") . |
void |
setSeedFace1(Face seedFace1)
License requirements: ugweld ("UG WELD") . |
void |
setSeedFace2(Face seedFace2)
License requirements: ugweld ("UG WELD") . |
void |
setSeedPoint1(Point3d seedPoint1)
License requirements: ugweld ("UG WELD") . |
void |
setSeedPoint2(Point3d seedPoint1)
License requirements: ugweld ("UG WELD") . |
void |
setStartVector(boolean startVector)
License requirements: ugweld ("UG WELD") . |
void |
setThroatThickToggle(boolean throatThickToggle)
License requirements: ugweld ("UG WELD") . |
void |
setToggleCreateSkipWelds(boolean toggleCreateSkipWelds)
License requirements: ugweld ("UG WELD") . |
void |
setToggleRecreateDeletedWelds(boolean toggleRecreateDeletedWelds)
License requirements: ugweld ("UG WELD") . |
void |
setUparameter1(double u1)
Deprecated.
Deprecated in NX10.0.0. Removed with no replacement.
|
void |
setUparameter2(double u2)
Deprecated.
Deprecated in NX10.0.0. Removed with no replacement.
|
void |
setVparameter1(double v1)
Deprecated.
Deprecated in NX10.0.0. Removed with no replacement.
|
void |
setVparameter2(double v2)
Deprecated.
Deprecated in NX10.0.0. Removed with no replacement.
|
Expression |
spacing()
Returns the linear dimension spacing indicates distance between each weld.
|
OnPathDimensionBuilder |
startDist()
Returns the on path dimension start distance.
|
boolean |
startVector()
Returns the start direction reversed or not.
|
boolean |
throatThickToggle()
Returns the toggle throat thickness.
|
boolean |
toggleCreateSkipWelds()
Returns the toggle to create skip welds.
|
boolean |
toggleRecreateDeletedWelds()
Returns the toggle to recreate deleted welds.
|
double |
uparameter1()
Deprecated.
Deprecated in NX10.0.0. Removed with no replacement.
|
double |
uparameter2()
Deprecated.
Deprecated in NX10.0.0. Removed with no replacement.
|
double |
vparameter1()
Deprecated.
Deprecated in NX10.0.0. Removed with no replacement.
|
double |
vparameter2()
Deprecated.
Deprecated in NX10.0.0. Removed with no replacement.
|
CharacteristicsBuilder |
weldingCharacteristics()
Returns the welding characteristics.
|
commitFeature, getFeature, hideInternalParentFeatureAfterEdit, parentFeatureInternal, patchSolutionFlag, patchSurfaceFilename, setParentFeatureInternal, setParentFeatureInternal, setPatchSolutionFlag, setPatchSurfaceFilename, setSurroundingPatchSurfaceFilename, showInternalParentFeatureForEdit, surroundingPatchSurfaceFilename, unsetParentFeatureInternal
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
FilletBuilder.EnumExtendEdges extendEdges() throws NXException, RemoteException
NXException
RemoteException
void setExtendEdges(FilletBuilder.EnumExtendEdges extendEdges) throws NXException, RemoteException
extendEdges
- NXException
RemoteException
FilletBuilder.EnumConstructionMethod constructionMethod() throws NXException, RemoteException
NXException
RemoteException
void setConstructionMethod(FilletBuilder.EnumConstructionMethod constructionMethod) throws NXException, RemoteException
constructionMethod
- NXException
RemoteException
ScCollector faceSet1() throws NXException, RemoteException
NXException
RemoteException
ScCollector faceSet2() throws NXException, RemoteException
NXException
RemoteException
boolean directionVector1() throws NXException, RemoteException
NXException
RemoteException
void setDirectionVector1(boolean directionVector1) throws NXException, RemoteException
directionVector1
- NXException
RemoteException
boolean directionVector2() throws NXException, RemoteException
NXException
RemoteException
void setDirectionVector2(boolean directionVector2) throws NXException, RemoteException
directionVector2
- NXException
RemoteException
Section edgeSet1() throws NXException, RemoteException
NXException
RemoteException
Section edgeSet2() throws NXException, RemoteException
NXException
RemoteException
FilletBuilder.EnumExtensionMethod extensionMethod() throws NXException, RemoteException
NXException
RemoteException
void setExtensionMethod(FilletBuilder.EnumExtensionMethod extensionMethod) throws NXException, RemoteException
extensionMethod
- NXException
RemoteException
Expression extensionDistance() throws NXException, RemoteException
NXException
RemoteException
FilletBuilder.EnumContour contourType() throws NXException, RemoteException
NXException
RemoteException
void setContourType(FilletBuilder.EnumContour contour) throws NXException, RemoteException
contour
- NXException
RemoteException
boolean throatThickToggle() throws NXException, RemoteException
NXException
RemoteException
void setThroatThickToggle(boolean throatThickToggle) throws NXException, RemoteException
throatThickToggle
- NXException
RemoteException
Expression firstLeg() throws NXException, RemoteException
NXException
RemoteException
Expression secondLeg() throws NXException, RemoteException
NXException
RemoteException
Expression contourHeight() throws NXException, RemoteException
NXException
RemoteException
OnPathDimensionBuilder startDist() throws NXException, RemoteException
NXException
RemoteException
OnPathDimensionBuilder endDist() throws NXException, RemoteException
NXException
RemoteException
boolean startVector() throws NXException, RemoteException
NXException
RemoteException
void setStartVector(boolean startVector) throws NXException, RemoteException
startVector
- NXException
RemoteException
boolean endVector() throws NXException, RemoteException
NXException
RemoteException
void setEndVector(boolean endVector) throws NXException, RemoteException
endVector
- NXException
RemoteException
boolean directToggle() throws NXException, RemoteException
NXException
RemoteException
void setDirectToggle(boolean directToggle) throws NXException, RemoteException
directToggle
- NXException
RemoteException
boolean toggleCreateSkipWelds() throws NXException, RemoteException
NXException
RemoteException
void setToggleCreateSkipWelds(boolean toggleCreateSkipWelds) throws NXException, RemoteException
toggleCreateSkipWelds
- NXException
RemoteException
boolean toggleRecreateDeletedWelds() throws NXException, RemoteException
NXException
RemoteException
void setToggleRecreateDeletedWelds(boolean toggleRecreateDeletedWelds) throws NXException, RemoteException
toggleRecreateDeletedWelds
- NXException
RemoteException
FilletBuilder.EnumSkipWeldMethod enumMethod() throws NXException, RemoteException
NXException
RemoteException
void setEnumMethod(FilletBuilder.EnumSkipWeldMethod enumMethod) throws NXException, RemoteException
enumMethod
- NXException
RemoteException
Expression numberOfWelds() throws NXException, RemoteException
NXException
RemoteException
Expression segmentLength() throws NXException, RemoteException
NXException
RemoteException
Expression spacing() throws NXException, RemoteException
NXException
RemoteException
FilletBuilder.EnumWeldingType filletType() throws NXException, RemoteException
NXException
RemoteException
void setFilletType(FilletBuilder.EnumWeldingType filletType) throws NXException, RemoteException
filletType
- NXException
RemoteException
boolean fieldWeld() throws NXException, RemoteException
NXException
RemoteException
void setFieldWeld(boolean fieldWeld) throws NXException, RemoteException
fieldWeld
- NXException
RemoteException
CharacteristicsBuilder weldingCharacteristics() throws NXException, RemoteException
NXException
RemoteException
boolean associative() throws NXException, RemoteException
NXException
RemoteException
void setAssociative(boolean associative) throws NXException, RemoteException
associative
- NXException
RemoteException
boolean allowBroken() throws NXException, RemoteException
NXException
RemoteException
void setAllowBroken(boolean allowBroken) throws NXException, RemoteException
allowBroken
- NXException
RemoteException
FilletBuilder.EnumFillFaceHolesType fillFaceHoles() throws NXException, RemoteException
NXException
RemoteException
void setFillFaceHoles(FilletBuilder.EnumFillFaceHolesType fillFaceHolesType) throws NXException, RemoteException
fillFaceHolesType
- NXException
RemoteException
boolean addCosmeticEnd() throws NXException, RemoteException
NXException
RemoteException
void setAddCosmeticEnd(boolean addCosmeticEnd) throws NXException, RemoteException
addCosmeticEnd
- NXException
RemoteException
double distTolerance() throws NXException, RemoteException
NXException
RemoteException
void setDistTolerance(double distTolerance) throws NXException, RemoteException
distTolerance
- NXException
RemoteException
boolean assignWeldPMI() throws NXException, RemoteException
NXException
RemoteException
void setAssignWeldPMI(boolean assignWeldPMI) throws NXException, RemoteException
assignWeldPMI
- NXException
RemoteException
Face seedFace1() throws NXException, RemoteException
NXException
RemoteException
void setSeedFace1(Face seedFace1) throws NXException, RemoteException
seedFace1
- NXException
RemoteException
Point3d seedPoint1() throws NXException, RemoteException
NXException
RemoteException
void setSeedPoint1(Point3d seedPoint1) throws NXException, RemoteException
seedPoint1
- NXException
RemoteException
Face seedFace2() throws NXException, RemoteException
NXException
RemoteException
void setSeedFace2(Face seedFace2) throws NXException, RemoteException
seedFace2
- NXException
RemoteException
Point3d seedPoint2() throws NXException, RemoteException
NXException
RemoteException
void setSeedPoint2(Point3d seedPoint1) throws NXException, RemoteException
seedPoint1
- NXException
RemoteException
double uparameter1() throws NXException, RemoteException
NXException
RemoteException
void setUparameter1(double u1) throws NXException, RemoteException
u1
- NXException
RemoteException
double vparameter1() throws NXException, RemoteException
NXException
RemoteException
void setVparameter1(double v1) throws NXException, RemoteException
v1
- NXException
RemoteException
double uparameter2() throws NXException, RemoteException
NXException
RemoteException
void setUparameter2(double u2) throws NXException, RemoteException
u2
- NXException
RemoteException
double vparameter2() throws NXException, RemoteException
NXException
RemoteException
void setVparameter2(double v2) throws NXException, RemoteException
v2
- NXException
RemoteException
NXObject pmi() throws NXException, RemoteException
NXException
RemoteException
void setPmi(NXObject pmi) throws NXException, RemoteException
pmi
- NXException
RemoteException
double faceFillGapDistance() throws NXException, RemoteException
NXException
RemoteException
void setFaceFillGapDistance(double faceFillGapDistance) throws NXException, RemoteException
faceFillGapDistance
- NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.