public interface FaceMillingBuilder extends PlanarOperationBuilder
OperationCollection.createFaceMillingBuilder(nxopen.cam.CAMObject)
PlanarOperationBuilder.AutomaticPartBoundaryMethodTypes
MillOperationBuilder.WallCleanupTypes
OperationBuilder.HoleAxisTypes, OperationBuilder.HoleDepthTypes, OperationBuilder.OptimizationBasedOnTypes, OperationBuilder.OptimizationDistanceTypes, OperationBuilder.OptimizationLevelTypes
ParamBuilder.OptimizationTypes
Modifier and Type | Method and Description |
---|---|
Boundary |
blankBoundary()
Returns the blank boundary
License requirements: None. |
Boundary |
checkBoundary()
Returns the check boundary
License requirements: None. |
RoundPointBuilder |
roundPoint()
Returns the Round Point Output builder
License requirements: cam_base ("CAM BASE") . |
Boundary |
trimBoundary()
Returns the trim boundary
License requirements: None. |
Geometry |
wallGeometry()
Returns the wall geometry builder
License requirements: None. |
additionalPasses, automaticPartBoundaryMethod, bndStepover, checkGeometry, cornerLoops, cutAreaGeometry, cutPattern, deferCuttingStatus, depthPerCut, islandCleanup, nonCuttingBuilder, partGeometry, setAdditionalPasses, setAutomaticPartBoundaryMethod, setCornerLoops, setDeferCuttingStatus, setIslandCleanup, setToolMinimumLengthUsage, toolAxisFix, toolMinimumLengthUsage
cutParameters, feedsBuilder, minCutLength, motionOutput, referenceTool, setReferenceTool, setWallCleanupType, wallCleanupType
channelName, description, endOfPath, endUdeSet, geometry, getHoleAxisValues, gougeChecking, holeAxisType, holeDepth, holeDepthType, layoutAndLayer, motionOutputBuilder, notes, optimizationBasedOn, optimizationDistanceMethod, optimizationLevel, pathDisplayOptions, postToolPathExit, retractDistance, retractDistanceOnToolAxisChange, safeClearance, selectToolFlag, setChannelName, setDescription, setGougeChecking, setHoleAxisType, setHoleAxisValues, setHoleDepthType, setOptimizationBasedOn, setOptimizationDistanceMethod, setOptimizationLevel, setPostToolPathExit, setSelectToolFlag, startOfPath, startUdeSet, toolChangeSetting, toolPathEditor, toolPathSplitParametersBuilder
cycleEvent, cycleTable, getCustomizableItemBuilder, getCustomizableItemNames, optimizationMethod, setOptimizationMethod
commit, destroy, getCommittedObjects, getObject, showResults
printTestData, printTestData, tag, tagValue
validate
RoundPointBuilder roundPoint() throws NXException, RemoteException
NXException
RemoteException
Geometry wallGeometry() throws NXException, RemoteException
NXException
RemoteException
Boundary blankBoundary() throws NXException, RemoteException
NXException
RemoteException
Boundary checkBoundary() throws NXException, RemoteException
NXException
RemoteException
Boundary trimBoundary() throws NXException, RemoteException
NXException
RemoteException
Copyright 2017 Siemens Product Lifecycle Management Software Inc. All Rights Reserved.