- W - Static variable in class nxopen.cae.DurabilityDamageEvaluationBuilder.BwiWeldClassEnum
-
W
- W - Static variable in class nxopen.cae.DurabilityEventFatigueSettingsBuilder.BwiWeldClassEnum
-
W
- W - Static variable in class nxopen.mechatronics.ExternalConnectionElementBuilder.StreamType
-
write
- w - Variable in class nxopen.Point4d
-
weight
- w9 - Variable in class nxopen.HumanPosturePredictionBuilder.HandDataSaeData
-
the steering wheel angle A18 expression
- wadBoundaryValue() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the wrap around distance line to use as the boundary between the adult and child zones
License requirements: None.
- wadEndValue() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the last wrap around distance line to create
License requirements: None.
- wadOutputColor() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the color that will be used for the wrap around distance lines
License requirements: None.
- wadOutputFont() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the font that will be used for the wrap around distance lines
License requirements: None.
- wadOutputLayer() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the layer that will be used for the wrap around distance lines
License requirements: None.
- wadOutputWidth() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the line width that will be used for the wrap around distance lines
License requirements: None.
- wadStartValue() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the first wrap around distance line to create
License requirements: None.
- waferHeight() - Method in interface nxopen.tooling.DieCavityAndSlugHoleBuilder
-
Returns the wafer height
License requirements: None.
- WAIST - Static variable in class nxopen.HumanData.InverseKinematicsInitJoint
-
Indicate starting arm motion at the waist and using the
entire upper body
- WAIST - Static variable in class nxopen.HumanData.JointType
-
Indicate joint named waist
- waistFlexAngleData - Variable in class nxopen.HumanReachZone.Data
-
Waist flex angle value
- waistFlexRangeLowerData - Variable in class nxopen.HumanReachZone.Data
-
Lower limit of waist flex angle
- waistFlexRangeUpperData - Variable in class nxopen.HumanReachZone.Data
-
Upper limit of waist flex angle
- waistHeight - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- waistLateralAngleData - Variable in class nxopen.HumanReachZone.Data
-
Waist lateral angle value
- waistLateralRangeLowerData - Variable in class nxopen.HumanReachZone.Data
-
Lower limit of waist lateral angle range
- waistLateralRangeUpperData - Variable in class nxopen.HumanReachZone.Data
-
upper limit of waist lateral angle range
- wall() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the Wall
License requirements: cam_base ("CAM BASE")
.
- Wall - Interface in nxopen.display
-
Represents a
Wall
This class is restricted to being called from a program running during an
Interactive NX session.
- WALL - Static variable in class nxopen.geometricanalysis.GapFlushnessBuilder.PanelTypes
-
type wall
- WALL - Static variable in class nxopen.uf.UFCam.GeomType
-
- Wall.MaterialTextureType - Class in nxopen.display
-
the new wall material texture type
- Wall.MaterialType - Class in nxopen.display
-
- wall1() - Method in interface nxopen.features.SphericalCornerBuilder
-
Returns the wall faces 1
License requirements: None.
- wall1() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the first wall
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- wall1Continuity() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the first wall continuity
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- wall1Direction() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the first wall flow direction
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- wall2() - Method in interface nxopen.features.SphericalCornerBuilder
-
Returns the wall faces 2
License requirements: None.
- wall2() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the second wall
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- wall2Continuity() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the second wall continuity
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- wall2Direction() - Method in interface nxopen.features.StyledBlendBuilder
-
Returns the second wall flow direction
License requirements: studio_free_form ("STUDIO FREE FORM")
.
- wall3() - Method in interface nxopen.features.SphericalCornerBuilder
-
Returns the wall faces 3
License requirements: None.
- WALL_DEFORMATION - Static variable in class nxopen.features.GlobalShapingBuilder.DeformationTypeValues
-
Wall deformation
- WALL_DEPTH - Static variable in class nxopen.cam.TurnGrooveCornerControl.ReliefPlungeTypes
-
Groove Corner Control Relief Plunge Type is Wall Depth.
- WALL_DISTANCE - Static variable in class nxopen.cae.Result.Quantity
-
- WALL_FIRST - Static variable in class nxopen.cam.DmCmMultiplePassesCiBuilder.OrderType
-
Wall First
- WALL_THICKNESS_TYPE - Static variable in class nxopen.uf.UFGdt.ToleranceType
-
- wallACreate() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide if the "A" wall should be created
License requirements: None.
- wallAOffset() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the offset from the outside to be applied to the "A" wall
License requirements: None.
- wallARelief() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide if relief should be created at the top of the "A" wall
License requirements: None.
- wallAThickness() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the "A" wall thickness
License requirements: None.
- wallBCreate() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide if the "B" wall should be created
License requirements: None.
- wallBlankThickness() - Method in interface nxopen.cam.VolumeBased25DMillingOperationBuilder
-
Returns the wall blank thickness
License requirements: None.
- wallBOffset() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the offset from the outside to be applied to the "B wall
License requirements: None.
- wallBRelief() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide if relief should be created at the top of the "B" wall
License requirements: None.
- wallBThickness() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the "B" wall thickness
License requirements: None.
- wallCCreate() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide if the "C" wall should be created
License requirements: None.
- wallCleanupType() - Method in interface nxopen.cam.MillOperationBuilder
-
Returns the wall cleanup mode
License requirements: None.
- wallCOffset() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the offset from the outside to be applied to the "C" wall
License requirements: None.
- wallColor() - Method in interface nxopen.cam.Preferences
-
Returns the wall color
License requirements: None.
- wallCRelief() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide if relief should be created at the top of the "C" wall
License requirements: None.
- wallCThickness() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the "C" wall thickness
License requirements: None.
- wallDCreate() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide if the "D" wall should be created
License requirements: None.
- wallDisplayStyles() - Method in interface nxopen.cae.xyplot.PlotGraphTemplate
-
Returns the wall display styles.
- WallDisplayStyles - Interface in nxopen.cae.xyplot
-
Manages the wall display styles.
- WallDisplayStyles2D - Interface in nxopen.cae.xyplot
-
Manages the 2D wall display styles.
- WallDisplayStyles2DBarChart - Interface in nxopen.cae.xyplot
-
Manages the 2D bar chart wall display styles.
- WallDisplayStyles3D - Interface in nxopen.cae.xyplot
-
Manages the 3D wall display styles.
- wallDOffset() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the offset from the outside to be applied to the "D" wall
License requirements: None.
- wallDRelief() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the value (true or false) to decide if relief should be created at the top of the "D" wall
License requirements: None.
- wallDThickness() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the "D" wall thickness
License requirements: None.
- wallFaceList() - Method in interface nxopen.cae.Mesh3dHexBuilder
-
Returns the wall face list
License requirements: nx_masterfem ("Finite Element Modeling")
.
- wallFaces() - Method in interface nxopen.cam.ManualFeatureBuilder
-
Returns the manual feature wall faces
License requirements: None.
- wallFaces() - Method in interface nxopen.features.AnalyzePocketBuilder
-
Returns the collector of wall faces.
- wallFaces() - Method in interface nxopen.features.BlendPocketBuilder
-
Returns the collector of wall faces.
- wallFaceSelection() - Method in interface nxopen.cae.AutomaticSweepBetweenSelection
-
- wallFaceSelection() - Method in interface nxopen.cae.ManualSweepBetweenSelection
-
- wallGeometry() - Method in interface nxopen.cam.FaceMillingBuilder
-
Returns the wall geometry builder
License requirements: None.
- wallGeometry() - Method in interface nxopen.cam.MillAreaGeomBuilder
-
Returns the wall geometry builder
License requirements: None.
- wallGeometry() - Method in interface nxopen.cam.PlanarMillingBuilder
-
Returns the wall geometry builder
License requirements: None.
- wallGeometry() - Method in interface nxopen.cam.SurfaceContourBuilder
-
Returns the wall geometry builder
License requirements: None.
- wallIncrementBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the builder of Wall Increment
License requirements: None.
- wallMaterialTextureType() - Method in interface nxopen.display.Wall
-
Returns the wall material texture type - either shadow_catcher, image file, or invisible
License requirements: None.
- wallMaterialType() - Method in interface nxopen.display.Wall
-
- wallNumberPassesBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the builder of Wall Number of Passes
License requirements: None.
- wallOffset() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the offset to apply to the wall to create the wall area for the cam definition.
- wallOverlap() - Method in interface nxopen.cam.DriveMode
-
Returns the Wall Overlap Distance
License requirements: None.
- wallPercentage() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the percentage of the post area to be applied to determine the wall thicknesses
License requirements: None.
- WALLS - Static variable in class nxopen.cam.Preferences.GeometryTypes
-
walls
- WALLS_ONLY - Static variable in class nxopen.die.AddendumSectionBuilder.SurfaceBuildType
-
Create walls only surface.
- WALLS_ONLY - Static variable in class nxopen.die.AddSurfBuilder.Methods
-
Produces just the walls, no blend.
- wallSelection() - Method in interface nxopen.cam.Preferences
-
- wallStepMethod() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the Wall Step Method
License requirements: cam_base ("CAM BASE")
.
- wallStock() - Method in interface nxopen.cam.CutVolume
-
Returns the wall stock
License requirements: None.
- wallStock() - Method in interface nxopen.cam.MillCutParameters
-
Returns the wall stock
License requirements: None.
- wallStockOffsetBuilder() - Method in interface nxopen.cam.DmCmMultiplePassesCiBuilder
-
Returns the builder of Wall Stock Offset
License requirements: None.
- wallThickness() - Method in interface nxopen.die.DieShoeBuilder
-
Returns the wall thickness
License requirements: None.
- wallThickness() - Method in interface nxopen.die.DrawDiePunchSectionBuilder
-
Returns the wall thickness of the draw die punch casting.
- wallThickness() - Method in interface nxopen.die.MachineReliefBuilder
-
Returns the expression containing the thickness value of the wall for the cam definition.
- wallThickness() - Method in interface nxopen.features.ChangeShellThicknessBuilder
-
Returns the wall thickness
License requirements: None.
- wallThickness() - Method in interface nxopen.features.shipdesign.RoomBuilder
-
Returns the wall thickness.
- wallThickness() - Method in interface nxopen.tooling.DieDesDrawDieBuilder
-
Returns the wall thickness, which is used for define the wall thickness of the die.
- wallThickness() - Method in interface nxopen.tooling.DieDesDrawPunchBuilder
-
Returns the wall thickness, which is used for define the wall thickness of the die.
- wallThickness() - Method in interface nxopen.tooling.DieDesignLowerBinderBuilder
-
Returns the wall thickness
License requirements: ug_die_design ("Die Design")
.
- wallThicknessChecker() - Method in interface nxopen.tooling.ToolingManager
-
Returns the WallThicknessCheckerManager instance belonging to this part .
- WallThicknessCheckerBuilder - Interface in nxopen.tooling
-
Represents a builder to be used to perform wall thickness analysis.
- WallThicknessCheckerBuilder.CalculateMethod - Class in nxopen.tooling
-
The calculation method used for the wall thickness analysis.
- WallThicknessCheckerBuilder.LegendControl - Class in nxopen.tooling
-
The legend control used in displaying the thickness results.
- WallThicknessCheckerBuilder.RangeType - Class in nxopen.tooling
-
The range type for defining the ranges used in displaying the thickness results.
- WallThicknessCheckerManager - Interface in nxopen.tooling
-
Represents the manager of the WallThicknessChecker builder
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- wanmessage - Variable in class nxopen.uf.UFModeling.AskFeatWarningMessagesData
-
- wannum - Variable in class nxopen.uf.UFModeling.AskFeatWarningMessagesData
-
- WARN - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.Mate
-
warn user while using non product interface objects
- WARN - Static variable in class nxopen.assemblies.productinterface.ObjectBuilder.Wave
-
warn user while using non product interface objects
- warn(String) - Method in interface nxopen.cae.aerostructures.author.CalculationContext
-
Log a warning message
License requirements: nx_masterfem ("Finite Element Modeling")
.
- warn(String, int, String) - Method in interface nxopen.cae.aerostructures.author.CalculationContext
-
Log a warning message indexed by possibly empty failure mode and load case
License requirements: nx_masterfem ("Finite Element Modeling")
.
- warn(String, String, String) - Method in interface nxopen.cae.aerostructures.author.CalculationContext
-
Log a warning message indexed by possibly empty failure mode and load case
License requirements: nx_masterfem ("Finite Element Modeling")
.
- WARNED - Static variable in class nxopen.cae.modelcheck.TestValueTypes.Result
-
indicates the test value violates the warning criteria value
- warnedCount - Variable in class nxopen.cae.modelcheck.ElementQualityCheckResults.TestSummary
-
the count of elements with warning results.
- WARNING - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.OutputElements
-
Creates OUTPUT group with warning elements
- WARNING - Static variable in class nxopen.cae.modelcheck.ElementQualityCheckBuilder.ReportFormat
-
Only lists check results for elements with warning results in the report
- WARNING - Static variable in class nxopen.cae.modelcheck.TestValueTypes.CriteriaType
-
reports as warning if the check result failed with the criteria value
- WARNING - Static variable in class nxopen.cam.CutParametersActionWhenGougingTypes
-
Warning
- WARNING - Static variable in class nxopen.cam.DmRotaryFloorFinishBuilder.GougeActionTypes
-
Warning
- WARNING - Static variable in class nxopen.cam.DmSurfBuilder.GougeActionType
-
Warning
- WARNING - Static variable in class nxopen.features.Feature.DiagnosticType
-
Warning
- WARNING - Static variable in class nxopen.menubar.MenuBarManager.CallbackStatus
-
Inhibit further actions because a
warning condition was raised.
- WARNING - Static variable in class nxopen.NXMessageBox.DialogType
-
Warning
- WARNING - Static variable in class nxopen.preferences.SessionPdm.MessagesInconsistentRevisionsType
-
- WARNING - Static variable in class nxopen.Step242Importer.MessageEnum
-
- WARNING - Static variable in class nxopen.validate.RequirementBuilder.SeverityOptions
-
- WARNING - Static variable in class nxopen.Validation.Result
-
Validation Pass with warning
- WARNING - Static variable in class nxopen.weld.ConnectionFinderBuilder.FilterTypes
-
- WARNING_AND_ERROR_LIMIT - Static variable in class nxopen.cae.modelcheck.ElementQualitySetting.LimitValue
-
Both warning and error criteria value could be defined
- warningCodes - Variable in class nxopen.uf.UFAssem.DeformPartWarnings
-
- warningElementsColor() - Method in interface nxopen.cae.modelcheck.ElementQualityCheckBuilder
-
Returns the display color of warning elements
License requirements: None.
- warningLowerLimit - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
-
Warning lower limit
- WARNINGS - Static variable in class nxopen.cam.LowerLimit.ActionTypes
-
warnings
- warnings - Variable in class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceData
-
- warnings - Variable in class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceExtendedData
-
- warningsCount - Variable in class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceData
-
- warningsCount - Variable in class nxopen.uf.UFAssem.CaptureArrangementFromCurrentSequenceExtendedData
-
- warningShowIsocline() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the warning show isocline
License requirements: die_engineering ("DIE ENGINEERING")
.
- warningStrings - Variable in class nxopen.uf.UFAssem.DeformPartWarnings
-
- warningUpperLimit - Variable in class nxopen.optimization.DesignStudyBuilder.DesignStudyObjective
-
Warning Upper limit
- warningValue() - Method in interface nxopen.tooling.DieEngDefineProductOrientationBuilder
-
Returns the warning value
License requirements: die_engineering ("DIE ENGINEERING")
.
- warnOnDelete() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the warn on delete option
License requirements: None.
- warnOnDragDrop() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the warn on drag and drop
License requirements: None.
- warnUserFlag() - Method in interface nxopen.userdefinedobjects.UserDefinedClass
-
Returns the warn user flag.
- WARP_FACTOR - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- WARPAGE_ANGLE - Static variable in class nxopen.cae.modelcheck.TestValueTypes.TestType
-
- warpingCoefficient - Variable in class nxopen.cae.BeamSection.Properties
-
Warping coefficient
- warpToggle() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns a value indicating whether elements are to be split based on Warp.
- warpValue() - Method in interface nxopen.cae.ElementSplitBuilder
-
Returns a threshold warp value.
- wasDisplayPartReopened() - Method in interface nxopen.PartReopenReport
-
Returns whether or not the display part was reopened by the reopen operation.
- WASHER - Static variable in class nxopen.routing.ReuseLibrary.PartType
-
Washer Post Placement Type
- washers - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionPostPlacementData
-
Whether or not to place Washers for this connection.
- washers - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData
-
Report Washers
- WASHOUT - Static variable in class nxopen.die.DrawBeadTaperBuilder.TaperTypes
-
Create a slope based on the height and length desired.
- WATER_CUMULATION - Static variable in class nxopen.cae.Result.Quantity
-
- WATER_STOP - Static variable in class nxopen.features.shipdesign.AlongGuideCutBuilder.CreationMethod
-
Water stop cut type
- WATER_TIGHT - Static variable in class nxopen.features.shipdesign.PlateBuilder.TightnessOptions
-
- WATERFALLOF_FREQUENCY_SPECTRA - Static variable in class nxopen.cae.SimLoadRecipeTypes.DataTypes
-
Waterfall of Frequency Spectra
- WATERFALLOF_TIME_DATA - Static variable in class nxopen.cae.SimLoadRecipeTypes.DataTypes
-
Waterfall of Time Data
- waterline() - Method in interface nxopen.annotations.BaseFrameBarBuilder
-
Returns the waterline
License requirements: None.
- WATERLINE - Static variable in class nxopen.annotations.FrameBarElements
-
- waterline() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the position value of waterline along the Z axis.
- waterlineLabelColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label color
License requirements: None.
- waterlineLabelFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label font
License requirements: None.
- waterlineLabelItalicized() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label italicized
License requirements: None.
- waterlineLabelWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the label width
License requirements: None.
- waterlineStyle() - Method in interface nxopen.annotations.FrameBarStyleBuilder
-
Returns the style waterline
License requirements: None.
- waterlineTicColor() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic color
License requirements: None.
- waterlineTicDisplay() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the waterline tic display type
License requirements: None.
- waterlineTicFont() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic font
License requirements: None.
- waterlineTicLength() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic length
License requirements: None.
- waterlineTicWidth() - Method in interface nxopen.annotations.FrameBarPreferences
-
Returns the tic width
License requirements: None.
- watermark() - Method in interface nxopen.PrintPDFBuilder
-
Returns the watermark text.
- waterStopOffsetOption() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- waterStopShape() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- waterStopShapeList() - Method in interface nxopen.features.shipdesign.AlongGuideCutBuilder
-
- WatertightFittingsBuilder - Interface in nxopen.routing
-
- wave() - Method in interface nxopen.UFSession
-
- WAVE_GEOMETRY - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkCategory
-
Indicate link category is wave geometry
- WAVE_GEOMETRY - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkOption
-
Indicate relink option is wave geometry only
- WaveDatum - Interface in nxopen.features
-
Represents a WAVEDATUM feature
To create or edit an instance of this class, use
WaveDatumBuilder
Created in NX5.0.0
- WaveDatumBuilder - Interface in nxopen.features
-
Represents a Wave Datum builder.
- waveDatumBuilder() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the wave datum builder
License requirements: None.
- WaveDatumBuilder.ParentPartType - Class in nxopen.features
-
enum for scope of part
- WaveDatumBuilder.WaveLinkInformationData - Class in nxopen.features
-
- waveFaces() - Method in interface nxopen.tooling.BackingPadBuilder
-
Wave selected faces to support journamation
License requirements: None.
- waveFaces() - Method in interface nxopen.tooling.ReliefDesignBuilder
-
Wave face to work part for creating user defined relief as reference.
- waveFacesAndFillHole(Part, NXObject) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Wave faces and fill hole
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- waveFacesOfSelectedCurves(Part, NXObject) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Wave faces of selected curves
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- waveFormingRegion() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Wave forming region.
- WaveInterfaceLinkerBuilder - Interface in nxopen.features
-
- waveIntersectBodyToNewDieInsertPart(NXObject[]) - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Wave intersect body to new die insert part.
- WAVELET - Static variable in class nxopen.cae.AfuMathOperation.SrsToTimeOption
-
Wavelet method
- WaveLink - Interface in nxopen.features
-
Represents a wavelink feature.
- waveLinkBasicDesignData(ShipPreparationInfo) - Method in interface nxopen.features.shipdesign.ShipPreparationBuilder
-
Wave links in the proper basic design data, if not already linked, into the work part.
- WaveLinkBuilder - Interface in nxopen.features
-
Represents a Wavelink Feature builder.
- WaveLinkBuilder.Types - Class in nxopen.features
-
Wave Linker type
- WaveLinkInformationData() - Constructor for class nxopen.features.CompositeCurveBuilder.WaveLinkInformationData
-
- WaveLinkInformationData() - Constructor for class nxopen.features.DatumCsysBuilder.WaveLinkInformationData
-
- WaveLinkInformationData() - Constructor for class nxopen.features.ExtractFaceBuilder.WaveLinkInformationData
-
- WaveLinkInformationData() - Constructor for class nxopen.features.MirrorBodyBuilder.WaveLinkInformationData
-
- WaveLinkInformationData() - Constructor for class nxopen.features.WaveDatumBuilder.WaveLinkInformationData
-
- WaveLinkInformationData() - Constructor for class nxopen.features.WavePointBuilder.WaveLinkInformationData
-
- WaveLinkInformationData() - Constructor for class nxopen.features.WaveRoutingBuilder.WaveLinkInformationData
-
- WaveLinkInformationData() - Constructor for class nxopen.features.WaveSketchBuilder.WaveLinkInformationData
-
- WaveLinkRepository - Interface in nxopen.geometricutilities
-
- WavePoint - Interface in nxopen.features
-
Represents a wavepoint feature
To create or edit an instance of this class, use
WavePointBuilder
Created in NX5.0.0
- wavePointBuilder() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the wave point builder
License requirements: None.
- WavePointBuilder - Interface in nxopen.features
-
- WavePointBuilder.ParentPartType - Class in nxopen.features
-
enum for scope of part
- WavePointBuilder.WaveLinkInformationData - Class in nxopen.features
-
- WaveQuery - Interface in nxopen.assemblies
-
Provides information about the inter-part relations (e.g.
- WaveQuery.PartPreviewData - Class in nxopen.assemblies
-
- WaveRouting - Interface in nxopen.features
-
Represents a waverouting feature
To create or edit an instance of this class, use
WaveRoutingBuilder
Created in NX5.0.0
- waveRoutingBuilder() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the wave routing builder
License requirements: None.
- WaveRoutingBuilder - Interface in nxopen.features
-
- WaveRoutingBuilder.WaveLinkInformationData - Class in nxopen.features
-
- waveSelectedCurves() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Wave selected curves
License requirements: prog_die_wizard ("UG/Progressive Die Wizard")
.
- waveSetting() - Method in interface nxopen.assemblies.productinterface.ObjectBuilder
-
Returns the current rule setting for use during creation of WAVE geomtery and interpart expressions
License requirements: None.
- WaveSketch - Interface in nxopen.features
-
Represents a WAVESKETCH feature
To create or edit an instance of this class, use
WaveSketchBuilder
Created in NX5.0.1
- waveSketchBuilder() - Method in interface nxopen.features.WaveLinkBuilder
-
Returns the wave sketch builder
License requirements: None.
- WaveSketchBuilder - Interface in nxopen.features
-
Represents a WaveSketchBuilder.
- WaveSketchBuilder.ParentPartType - Class in nxopen.features
-
enum for scope of part
- WaveSketchBuilder.WaveLinkInformationData - Class in nxopen.features
-
- wavinessText() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the waviness text
License requirements: None.
- wavinessTextType() - Method in interface nxopen.annotations.SearchCriteriaSurfaceFinishBuilder
-
Returns the waviness text enum
License requirements: None.
- WCHAR - Static variable in class nxopen.ame.PlcDataType
-
- WCS - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentOriginType
-
Set the origin type to wcs
- wcs() - Method in interface nxopen.BasePart
-
Returns the WCS instance belonging to this part .
- WCS - Static variable in class nxopen.cam.DeltaMoveBuilder.IntentType
-
WCS
- WCS - Static variable in class nxopen.cam.InspectionDeltaMoveBuilder.IntentType
-
WCS
- WCS - Static variable in class nxopen.cam.LaserLinearMove.RefTypes
-
WCS
- WCS - Static variable in class nxopen.cam.Preferences.CsysInformationListingTypes
-
WCS
- WCS - Static variable in class nxopen.cam.TurnAvoidancePathPointsBuilder.CsTypes
-
WCS
- WCS - Static variable in class nxopen.display.BoundedGridBuilder.LabelReferenceType
-
Use projection of WCS origin on the
grid plane to determine grid line offset
labels
- WCS - Static variable in class nxopen.display.DynamicSectionTypes.CoordinateSystem
-
WCS
- WCS - Static variable in class nxopen.display.SelPref.Method
-
chaining method wcs
- WCS - Static variable in class nxopen.features.AssociativeArcBuilder.CenterReference
-
WCS
- WCS - Static variable in class nxopen.features.AssociativeArcBuilder.EndReference
-
WCS
- WCS - Static variable in class nxopen.features.AssociativeArcBuilder.MidReference
-
WCS
- WCS - Static variable in class nxopen.features.AssociativeArcBuilder.StartReference
-
WCS
- WCS - Static variable in class nxopen.features.AssociativeLineBuilder.EndReference
-
WCS
- WCS - Static variable in class nxopen.features.AssociativeLineBuilder.StartReference
-
WCS
- WCS - Static variable in class nxopen.features.EdgeSymmetryBuilder.MovementMethods
-
Does a match by moving poles along a WCS principal axis direction
- WCS - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMovementConstraintEnumType
-
Along WCS X/Y/Z direction
- WCS - Static variable in class nxopen.features.PolylineBuilder.MovementMethodType
-
Movement along WCS principal axis or plane
- WCS - Static variable in class nxopen.features.StudioSplineBuilderEx.MovementMethodType
-
Movement along WCS principal axis or plane
- WCS - Static variable in class nxopen.features.StudioXformBuilderEx.MovementMethodType
-
Translate in principal direction
- WCS - Static variable in class nxopen.features.StudioXformBuilderEx.RotatingAxisType
-
Rotate in principal direction
- WCS - Static variable in class nxopen.features.StudioXformBuilderEx.ScalingDirectionType
-
Scale in principal direction
- WCS - Static variable in class nxopen.features.subdivision.TransformCageData.MovementMethodType
-
Movement along WCS principal axis or plane
- WCS - Static variable in class nxopen.features.ToolingBoxBuilder.RefCsysType
-
reference WCS
- WCS - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.MovementMethodType
-
Movement along WCS principal axis or plane
- WCS - Static variable in class nxopen.geometricutilities.MovePoleBuilder.MoveMethodType
-
- WCS - Static variable in class nxopen.geometricutilities.PointsFromFileBuilder.Options
-
Work coordinates
- WCS - Static variable in class nxopen.IgesCreator.CsysrefEnum
-
export data with respect to working CSYS
- WCS - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.HealOrientation
-
- WCS - Static variable in class nxopen.PasteSpecialBuilder.DestinationOption
-
- WCS - Static variable in class nxopen.tooling.AddReusablePart.PositionMethod
-
- WCS - Static variable in class nxopen.tooling.StockSizeBuilder.RefCsysType
-
reference WCS
- WCS - Interface in nxopen
-
Represents the World Coordinate System.
- WCS.Axis - Class in nxopen
-
Specifies the X, Y, or Z axis
- WCS_AUTO_AXIS - Static variable in class nxopen.display.CgfxMattexBuilder.TextureSpaceShader
-
Deprecated.
auto tri plane
- WCS_DISPLAY_PART - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Reference CSYS is work coordinate system in the display part
- WCS_LEFT - Static variable in class nxopen.display.SelPref.Method
-
chaining method wcs left
- WCS_ORIGIN - Static variable in class nxopen.cam.CutLevel.MeasureTypes
-
WCS Origin
- WCS_RIGHT - Static variable in class nxopen.display.SelPref.Method
-
chaining method wcs right
- WCS_WORK_PART - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Reference
-
Reference CSYS is work coordinate system in the work part
- wcsdirection() - Method in interface nxopen.geometricutilities.MovePoleBuilder
-
Returns the fixed direction
License requirements: None.
- wcsOffset() - Method in interface nxopen.cam.TurnOrientWcs
-
Returns the offset of the WCS origin
License requirements: None.
- wcsoption() - Method in interface nxopen.features.PolylineBuilder
-
Returns the WCS option
License requirements: None.
- wcsoption() - Method in interface nxopen.features.StudioSplineBuilderEx
-
Returns the WCS option
License requirements: None.
- wcsoption() - Method in interface nxopen.features.subdivision.TransformCageData
-
Returns the WCS option.
- wcsoption() - Method in interface nxopen.geometricutilities.CurveShapingBuilder
-
Returns the WCS option
License requirements: None.
- wcsOrientOption() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the WCS Orient option
License requirements: None.
- wcstype() - Method in interface nxopen.tooling.MoldCsysBuilder
-
Returns the wcs type to decide the method to get csys position
License requirements: None.
- wcsVisibility() - Method in interface nxopen.View
-
Returns the visibility of the WCS in the view.
- wcsWorkPlaneEmphasis() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not objects on the WCS work
plane are emphasized.
- WDG15 - Static variable in class nxopen.uf.UFSf.ElementType
-
- WDG6 - Static variable in class nxopen.uf.UFSf.ElementType
-
- WDGCOHES15 - Static variable in class nxopen.uf.UFSf.ElementType
-
- WDGCOHES6 - Static variable in class nxopen.uf.UFSf.ElementType
-
- wearIndicatorPerSegment() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the Wear Indicator Per Cross Section Segment.
- wearPlateLength() - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Returns the wear plate length of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- wearPlateLength() - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Returns the wear plate length of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- wearPlateLocatorsParent() - Method in interface nxopen.die.RotorBuilder
-
Returns the wear plate and locator parent builder of the rotor.
- WearPlateLocChildBuilder - Interface in nxopen.die
-
Represents a Die Wear Plate Locator sub feature.
- WearPlateLocChildBuilder.PadAttributesData - Class in nxopen.die
-
- WearPlateLocChildBuilder.PositionType - Class in nxopen.die
-
Settings for the positioning of the locator relative to the wear plate.
- WearPlateLocParentBuilder - Interface in nxopen.die
-
Represents a Die Wear Plate Locator sub feature.
- WearPlateLocParentBuilder.PadAttributesData - Class in nxopen.die
-
- WearPlateLocParentBuilder.PositionType - Class in nxopen.die
-
Settings for the positioning of the locator relative to the wear plate.
- wearPlateParent() - Method in interface nxopen.die.DrawDiePunchBuilder
-
Returns the wear plate parent builder of the draw die punch.
- wearPlateWidth() - Method in interface nxopen.die.WearPlateLocChildBuilder
-
Returns the wear plate width of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- wearPlateWidth() - Method in interface nxopen.die.WearPlateLocParentBuilder
-
Returns the wear plate width of die wear plate and locators
License requirements: ug_die_design ("Die Design")
.
- WEATHER_STRIP - Static variable in class nxopen.cae.connections.ComposerConnectionType
-
WeatherStrip
- WEB - Static variable in class nxopen.features.sheetmetal.AdvancedFlangeBuilder.LengthReferences
-
- WEB - Static variable in class nxopen.features.sheetmetal.FlangeBendPropertiesBuilder.LengthReferences
-
- WEB - Static variable in class nxopen.features.sheetmetal.SheetmetalFaceType
-
- WEB - Static variable in class nxopen.features.shipdesign.StiffenerBySupportPathBuilder.AlignedTo
-
- web() - Method in interface nxopen.UFSession
-
- WEB_DIMENSION - Static variable in class nxopen.features.sheetmetal.FlangeBuilder.LengthTypeOptions
-
The flange length is dimensioned to the Bend Tangent Line.
- WEB_ONLY - Static variable in class nxopen.features.shipdesign.SeamBlockBuilder.SeamType
-
Split the built up web
- webAngle() - Method in interface nxopen.features.shipdesign.BuiltUpOffsetBuilder
-
Returns the web angle used to determin the boundary of seam/split
License requirements: None.
- WebAppSession - Interface in nxopen.pdm
-
Represents the Web App session
To obtain an instance of this class, refer to
Session
Created in NX11.0.0
- webAppSession() - Method in interface nxopen.Session
-
Returns the
WebAppSession
belonging to this session
Created in NX11.0.0
- webDistance() - Method in interface nxopen.tooling.BlankNestingBuilder
-
Returns the distance between the blank and the strip.
- webFaces() - Method in interface nxopen.features.sheetmetal.SheetMetalFromSolidBuilder
-
Returns the web faces
License requirements: None.
- webOffset() - Method in interface nxopen.features.shipdesign.BuiltUpOffsetBuilder
-
Returns the web offset used to determin the boundary of seam/split
License requirements: None.
- webSketchData() - Method in interface nxopen.features.shipdesign.EndCutBuilder
-
Returns the web sketch data.
- webTaperAngle1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the web taper angle1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- webTaperAngle2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the web taper angle2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- webTaperType1() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the web taper type for side 1
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- webTaperType2() - Method in interface nxopen.features.sheetmetal.BendTaperBuilder
-
Returns the web taper type for side 2
License requirements: nx_sheet_metal ("NX Sheet Metal") OR nx_flexible_pcb ("NX Flexible PCB")
.
- WED - Static variable in class nxopen.cae.ElementTypes.Shape
-
Wedge
- WEDM - Static variable in class nxopen.cam.Tool.Types
-
WEDM tool
- WEDM_POINTS - Static variable in class nxopen.cam.CAMObject.Attr
-
- WedmArcOutputTypeCiBuilder - Interface in nxopen.cam
-
Represents a WedmArcOutputTypeCiBuilder .
- wedmArcOutputTypeCiBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the wedm arc output type Builder
License requirements: cam_base ("CAM BASE")
.
- wedmArcOutputTypeCiBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the wedm arc output type Builder
License requirements: cam_base ("CAM BASE")
.
- WedmArcOutputTypeCiBuilder.OutputTypes - Class in nxopen.cam
-
Available types for output
- WedmBasedGeomBuilder - Interface in nxopen.cam
-
- WedmCornerControlBuilder - Interface in nxopen.cam
-
- WedmCustomBoundaryDataBuilder - Interface in nxopen.cam
-
Represents a WedmCustomBoundaryData Builder
No Creator
.
- WedmCustomBoundaryDataBuilderList - Interface in nxopen.cam
-
Represents a list of objects.
- WedmCutOrderBuilder - Interface in nxopen.cam
-
- WedmCutOrderBuilder.Type - Class in nxopen.cam
-
Cut Order
- WedmCutParameters - Interface in nxopen.cam
-
- WedmCutParameters.CutDirectionTypes - Class in nxopen.cam
-
the types available for wedm cut direction .
- WedmCutParameters.WirePositionTypes - Class in nxopen.cam
-
the types available for wire position .
- WedmCuttingBuilder - Interface in nxopen.cam
-
- WedmExtGeomBuilder - Interface in nxopen.cam
-
- WedmFeatureGeomBuilder - Interface in nxopen.cam
-
- WedmGeomBuilder - Interface in nxopen.cam
-
- WedmGeomBuilder.BackburnPassesTypes - Class in nxopen.cam
-
the types available for wedm backburn passes .
- WedmGeomBuilder.ConvexCornerTypes - Class in nxopen.cam
-
the types available for convex corner control .
- WedmGeomBuilder.CornerSmoothingType - Class in nxopen.cam
-
the types available for corner smoothing .
- WedmGeomBuilder.SmoothLeadInTypes - Class in nxopen.cam
-
the types available for smooth_lead_in .
- WedmGeomBuilder.SmoothLeadOutTypes - Class in nxopen.cam
-
the types available for smooth_lead_out_types .
- WedmGeomBuilder.StopPointFlagTypes - Class in nxopen.cam
-
the types available for wedm stop point .
- WedmGeomBuilder.StopPointTypes - Class in nxopen.cam
-
the types available for wedm stop point .
- WedmIntGeomBuilder - Interface in nxopen.cam
-
- WedmLeadInOutBuilder - Interface in nxopen.cam
-
- WedmMachineControl - Interface in nxopen.cam
-
Represents a WEDM Machine Control operation
To create or edit an instance of this class, use
WedmMachineControlBuilder
Created in NX7.5.0
- WedmMachineControlBuilder - Interface in nxopen.cam
-
- WedmMethodBuilder - Interface in nxopen.cam
-
- WedmMoveControlBuilder - Interface in nxopen.cam
-
- WedmNocoreGeomBuilder - Interface in nxopen.cam
-
- WedmOpenGeomBuilder - Interface in nxopen.cam
-
- WedmOperationBuilder - Interface in nxopen.cam
-
- WedmOperationBuilder.BackburnPassesTypes - Class in nxopen.cam
-
the types available for wedm backburn passes .
- WedmOperationBuilder.ConvexCornerTypes - Class in nxopen.cam
-
the types available for convex corner control .
- WedmOperationBuilder.CornerSmoothingType - Class in nxopen.cam
-
the types available for corner smoothing .
- WedmOperationBuilder.InPathUdeSetTypes - Class in nxopen.cam
-
Represents the in path ude set type .
- WedmOperationBuilder.SmoothLeadInTypes - Class in nxopen.cam
-
the types available for smooth_lead_in .
- WedmOperationBuilder.SmoothLeadOutTypes - Class in nxopen.cam
-
the types available for smooth_lead_out_types .
- WedmOperationBuilder.StopPointFlagTypes - Class in nxopen.cam
-
the types available for wedm stop point .
- WedmOperationBuilder.StopPointTypes - Class in nxopen.cam
-
the types available for wedm stop point .
- WedmOrientGeomBuilder - Interface in nxopen.cam
-
- WedmPointDefinitionBuilder - Interface in nxopen.cam
-
- WedmPointDefinitionBuilder.PointStates - Class in nxopen.cam
-
the types available for wedm point definition
- WedmPointDefinitionBuilder.WireAxisStates - Class in nxopen.cam
-
the types available for wire axis definition
- wedmStatusControlCiBuilder() - Method in interface nxopen.cam.WedmGeomBuilder
-
Returns the wedm status control ci Builder
License requirements: cam_base ("CAM BASE")
.
- wedmStatusControlCiBuilder() - Method in interface nxopen.cam.WedmOperationBuilder
-
Returns the wedm status control ci Builder
License requirements: cam_base ("CAM BASE")
.
- WedmStatusControlCiBuilder - Interface in nxopen.cam
-
Represents a WedmStatusControlCiBuilder .
- WedmStatusControlCiBuilder.StatusTypes - Class in nxopen.cam
-
Available types for status control
- wedmStepoverBuilder() - Method in interface nxopen.cam.WedmCutParameters
-
Returns the WedmStepover builder
License requirements: cam_base ("CAM BASE")
.
- WedmStepoverBuilder - Interface in nxopen.cam
-
- WedmUserDefined - Interface in nxopen.cam
-
Represents a User Defined WEDM operation
To create or edit an instance of this class, use
WedmUserDefinedBuilder
Created in NX7.5.0
- WedmUserDefinedBuilder - Interface in nxopen.cam
-
- WEEK - Static variable in class nxopen.visualreporting.Classifier.DateGroupMethodOption
-
The date grouping by week will be used
- WEIGHT - Static variable in class nxopen.cae.optimization.Response
-
- WEIGHT - Static variable in class nxopen.cae.optimization.TBSDesignResponseBuilder.Response
-
Weight of element
- weight() - Method in interface nxopen.cae.optimization.TBSSingleObjective
-
Returns the weight of the design variable
License requirements: None.
- weight() - Method in interface nxopen.cae.xyplot.TextStyleSetting
-
Returns the text weight.
- weight - Variable in class nxopen.features.HumanBuilder.WeightData
-
Weight value
- WEIGHT - Static variable in class nxopen.MeasureBodies.ActiveValue
-
- weight() - Method in interface nxopen.MeasureBodies
-
Returns the value for weight of the measurement
License requirements: None.
- weight - Variable in class nxopen.uf.UFModl.BsurfRowInfo
-
- weight() - Method in interface nxopen.UFSession
-
- WEIGHT_STATUS_PROPERTY - Static variable in class nxopen.visualreporting.Property.TypeOption
-
The weight status of the component
- WeightAndCGBuilder - Interface in nxopen.features.shipdesign
-
Represents the class Features.ShipDesign.WeightAndCGBuilder which is used to
calculate the weight and cg information.
- WeightAndCGBuilder.SelectionMethods - Class in nxopen.features.shipdesign
-
Settings to indicate how the objects are selected.
- WeightData() - Constructor for class nxopen.features.HumanBuilder.WeightData
-
- WEIGHTED - Static variable in class nxopen.cae.Result.DiscontinuityMethod
-
weighted discontinuity
- WEIGHTED_AVERAGE - Static variable in class nxopen.cae.PostGraphAcrossIterationsBuilder.CombinationMethod
-
- WEIGHTED_AVERAGE - Static variable in class nxopen.cae.PostGraphBuilder.GeometryValue
-
- WEIGHTED_AVERAGE - Static variable in class nxopen.cae.ResultProbeBuilder.CombineAcrossEntities
-
- WEIGHTED_AVERAGE - Static variable in class nxopen.cae.ResultProbeBuilder.GeometryValue
-
- weightOption() - Method in interface nxopen.HumanData
-
Returns the weight type for weight value
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- weightPercent() - Method in interface nxopen.features.subdivision.SubdivisionSetWeightBuilder
-
Returns the value indicating percentage weight.
- weightRating() - Method in interface nxopen.features.shipdesign.PlateStockBuilder
-
Returns the weight rating, which is defined together with material data and has one to one relationship to the thickness.
- WEIGHTS - Static variable in class nxopen.cae.connections.ModelizationResultType
-
Interpolation element weights
- weightType - Variable in class nxopen.features.HumanBuilder.WeightData
-
Flag for percentile weight in database or actual weight value
- weightUnit - Variable in class nxopen.features.HumanBuilder.WeightData
-
Unit for weight
- weightValue() - Method in interface nxopen.HumanData
-
Returns the weight value
License requirements: solid_modeling ("SOLIDS MODELING"), ug_human ("Human Modelling")
.
- welcomeMode() - Method in interface nxopen.preferences.LoadDraftingStandardBuilder
-
Returns the welcome mode
License requirements: None.
- Weld - Interface in nxopen.annotations
-
Represents a weld
To obtain an instance of this class, use
WeldCollection
Created in NX4.0.0
- WELD - Static variable in class nxopen.cae.ElementTypeBuilder.ElementType
-
Weld element
- weld() - Method in interface nxopen.features.shipdesign.EdgeReinforcementBuilder
-
Returns the builder used to specify the welding characteristics for the edge reinforcement.
- WELD - Static variable in class nxopen.features.shipdesign.ManufacturingAssemblyNavigatorBuilder.ContainerType
-
Weld Container
- weld() - Method in interface nxopen.features.shipdesign.PlateSystemBuilder
-
Returns the welding characteristics builder, used to assign welding characteristics to the outermost edges of a plate system.
- weld() - Method in interface nxopen.features.shipdesign.StiffenerSystemBuilder
-
Returns the builder used to specify the welding characteristics for the stiffener system.
- WELD - Static variable in class nxopen.uf.UFSf.ElementType
-
- weld() - Method in interface nxopen.UFSession
-
- WELD_ALONG_EDGE - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
obsolete in NX7.5
- WELD_ATTRIBUTE - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Edit Weld Attribute
- WELD_BACKING_PERM - Static variable in class nxopen.uf.UFDrf.WeldContourTypes
-
- WELD_BACKING_REMV - Static variable in class nxopen.uf.UFDrf.WeldContourTypes
-
- WELD_BACKING_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_BEVEL_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_BEVEL_WITH_BRF_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_BLENDED_TOES - Static variable in class nxopen.uf.UFDrf.WeldContourTypes
-
- WELD_BUTT_WITH_RE_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_CHIP_FINISH - Static variable in class nxopen.uf.UFDrf.WeldFinishTypes
-
- WELD_CLEARANCE - Static variable in class nxopen.features.shipdesign.AlongGuideCutBuilder.CreationMethod
-
Weld clearance cut type
- WELD_CODE_A - Static variable in class nxopen.uf.UFDrf.WeldSizeCode
-
- WELD_CODE_C - Static variable in class nxopen.uf.UFDrf.WeldSizeCode
-
- WELD_CODE_D - Static variable in class nxopen.uf.UFDrf.WeldSizeCode
-
- WELD_CODE_P - Static variable in class nxopen.uf.UFDrf.WeldSizeCode
-
- WELD_CODE_S - Static variable in class nxopen.uf.UFDrf.WeldSizeCode
-
- WELD_CODE_Z - Static variable in class nxopen.uf.UFDrf.WeldSizeCode
-
- WELD_CONCAVE - Static variable in class nxopen.uf.UFDrf.WeldContourTypes
-
- WELD_CONVEX - Static variable in class nxopen.uf.UFDrf.WeldContourTypes
-
- WELD_EDGE2SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_EDGE_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_FILLET - Static variable in class nxopen.uf.UFConstants
-
- WELD_FILLET_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_FLANGE - Static variable in class nxopen.weld.WeldAdvisorCheckerType
-
weld flange
- WELD_FLARE_BEVEL_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_FLARE_VSYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_FLUSH - Static variable in class nxopen.uf.UFDrf.WeldContourTypes
-
- WELD_FOLD_JOINT_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_GRIND_FINISH - Static variable in class nxopen.uf.UFDrf.WeldFinishTypes
-
- WELD_GROOVE_VSYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_HAMMER_FINISH - Static variable in class nxopen.uf.UFDrf.WeldFinishTypes
-
- WELD_INCLINED_JOINT_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_JSYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_KGROOVE_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_LIMITS - Static variable in class nxopen.weld.WeldGrooveBuilder.Prepare
-
Weld Limits
- WELD_LIMITS - Static variable in class nxopen.weld.WeldPrepareEdges
-
Output edges will be prepared for the weld length only
- WELD_MACHINE_FINISH - Static variable in class nxopen.uf.UFDrf.WeldFinishTypes
-
- WELD_MELT_THROUGH - Static variable in class nxopen.uf.UFDrf.WeldContourTypes
-
- WELD_NO_CODE - Static variable in class nxopen.uf.UFDrf.WeldSizeCode
-
- WELD_NO_FINISH - Static variable in class nxopen.uf.UFDrf.WeldFinishTypes
-
- WELD_NO_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_NONE - Static variable in class nxopen.uf.UFDrf.WeldContourTypes
-
- WELD_NUT - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Weld Nut
- WELD_NUT - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Weld Nut
- WELD_NUT - Static variable in class nxopen.weld.WeldFeatureSetType
-
Weld Nut
- WELD_NUT_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- WELD_ON_EDGE - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibOptionType
-
- WELD_PEEN_FINISH - Static variable in class nxopen.uf.UFDrf.WeldFinishTypes
-
- WELD_PLUG_SLOT_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_POINT - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Weld Point command
- WELD_POINT - Static variable in class nxopen.weld.WeldPointExitBuilder.CommandName
-
Weld Point command
- WELD_POINT_WIZARD - Static variable in class nxopen.weld.WeldObjectBuilder.CommandName
-
Weld Point Wizard command
- WELD_POINT_WIZARD - Static variable in class nxopen.weld.WeldPointExitBuilder.CommandName
-
Weld Point Wizard command
- WELD_ROLL_FINISH - Static variable in class nxopen.uf.UFDrf.WeldFinishTypes
-
- WELD_ROW - Static variable in class nxopen.cae.MeshControlBuilder.Types
-
- WELD_SEAM2SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_SEAM_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_SPOT - Static variable in class nxopen.uf.UFConstants
-
- WELD_SPOT2SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_SPOT_PT - Static variable in class nxopen.uf.UFConstants
-
- WELD_SPOT_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_SQUARE_BUTT_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_STAKE_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_STP_FLANK_BEVEL_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_STP_FLANK_VSYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_STUD - Static variable in class nxopen.weld.PointMarkBuilder.WeldTypes
-
Weld Stud
- WELD_STUD - Static variable in class nxopen.weld.WeldAdvisorCustomerDefault
-
Weld Stud
- WELD_STUD - Static variable in class nxopen.weld.WeldFeatureSetType
-
Weld Stud
- WELD_STUD_FEATURE - Static variable in class nxopen.weld.CharacteristicsBuilder.Type
-
- WELD_STUD_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_SURFACE_JOINT_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_SURFACING_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_SYM_EXT_BOX - Static variable in class nxopen.uf.UFDrf.WeldSymExtType
-
- WELD_SYM_EXT_DOG_LEG - Static variable in class nxopen.uf.UFDrf.WeldSymExtType
-
- WELD_SYM_EXT_NONE - Static variable in class nxopen.uf.UFDrf.WeldSymExtType
-
- WELD_SYM_IDENT_LINE_BOTTOM - Static variable in class nxopen.uf.UFDrf.WeldIdentLineType
-
- WELD_SYM_IDENT_LINE_TOP - Static variable in class nxopen.uf.UFDrf.WeldIdentLineType
-
- WELD_SYM_NO_IDENT_LINE - Static variable in class nxopen.uf.UFDrf.WeldIdentLineType
-
- WELD_SYMBOL - Static variable in class nxopen.drawings.AnnotationSettingsBuilder.AnnotationTypeEnum
-
- WELD_UDAW_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- WELD_USYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WELD_VWITH_BRF_SYMBOL - Static variable in class nxopen.uf.UFDrf.WeldSymbolTypes
-
- WeldAdvisorBuilder - Interface in nxopen.weld
-
- WeldAdvisorBuilder.FailedObjectsData - Class in nxopen.weld
-
- WeldAdvisorCheckerType - Class in nxopen.weld
-
the type of checker
- WeldAdvisorCustomerDefault - Class in nxopen.weld
-
the customer default value types
- weldAlongContour() - Method in interface nxopen.annotations.LineWeldBuilder
-
Returns the weld along contour option
License requirements: None.
- weldArcGridLineEndCapDisp() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld arc grid line end cap disp
License requirements: None.
- weldArcGridLineTopDisp() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld arc grid line top disp
License requirements: None.
- WeldArcMethod - Class in nxopen.weld
-
Settings for output type
- weldArray - Variable in class nxopen.uf.UFWeld.LocateWeldsData
-
- weldAssoColor() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld asso color
License requirements: None.
- WeldAttribType - Class in nxopen.weld
-
the type of attribute
- WeldBead - Interface in nxopen.weld
-
Represents a Weld Bead feature
To create or edit an instance of this class, use
WeldBeadBuilder
Created in NX7.5.0
- WeldBeadBuilder - Interface in nxopen.weld
-
Used to create or edit a
WeldBead
feature.
- WeldBeadBuilder.BeadLocationMethod - Class in nxopen.weld
-
Settings to indicate the desired location of the bead.
- WeldBeadBuilder.FaceInferMethodType - Class in nxopen.weld
-
Settings to indicate the method for obtaining faces used when creating the guide curve path.
- WeldBeadBuilder.OutputTypes - Class in nxopen.weld
-
Settings to indicate the update behaviour of the bead feature
- WeldBeadBuilder.Types - Class in nxopen.weld
-
Settings to indicate the sweep shape of the bead.
- WeldBeadPathBuilder - Interface in nxopen.weld
-
Represents the path the bead shape will be swept along.
- WeldBeadPathBuilder.OffsetMethodType - Class in nxopen.weld
-
Settings to indicate the desired offset method.
- WeldBeadPathBuilder.UpdatePathData - Class in nxopen.weld
-
- WeldBeadPathBuilderList - Interface in nxopen.weld
-
Represents a list of objects.
- WeldBeadSizeBuilder - Interface in nxopen.weld
-
This builder is used to define the bead shape.
- WeldBeadSizeBuilder.Size - Class in nxopen.weld
-
Settings to indicate which standard size to use from the customer defaults file.
- WeldBeadSizeBuilder.TriangleMethodType - Class in nxopen.weld
-
Settings to indicate the type of method used to build a triangle shape.
- WeldBeadSizeBuilder.TriangleTypes - Class in nxopen.weld
-
Settings to indicate the type of triangle.
- WeldBeadSizeBuilderList - Interface in nxopen.weld
-
Represents a list of objects.
- WeldBuilder - Interface in nxopen.cae
-
- WeldBuilder.NumberOfPointsOnEdgeType - Class in nxopen.cae
-
Represents the options for specifying maximum number of weld points on an edge
- WeldBuilder.PointOnEdgeType - Class in nxopen.cae
-
Represents the options for specifying number of weld points on an edge
- WeldBuilder.WeldLocation - Class in nxopen.cae
-
Represents the options for type of operation
- weldCharacteristics() - Method in interface nxopen.features.shipdesign.BracketBuilder
-
Returns the weld characteristics.
- weldCharacteristics() - Method in interface nxopen.features.shipdesign.CollarPlateBuilder
-
Returns the weld characteristics.
- weldCharacteristics() - Method in interface nxopen.features.shipdesign.EditWeldingBuilder
-
Returns the weld characteristics
License requirements: None.
- weldCharacteristics() - Method in interface nxopen.features.shipdesign.ProfileCutoutBuilder
-
Returns the welding characteristics that will be attached to profile cuotut edges which have attribute MK_TYPE=WELD_EDGE.
- weldCharacteristics() - Method in interface nxopen.features.shipdesign.SplitStandardPartBuilder
-
Returns the weld characteristics assigned to the split edges.
- weldCharacteristics() - Method in interface nxopen.features.shipdesign.StandardPartFrameworkBuilder
-
Returns the weld characteristics.
- WeldCollection - Interface in nxopen.annotations
-
Represents a collection of
Weld
objects
To obtain an instance of this class, refer to
AnnotationManager
Created in NX4.0.0
- weldConstLayer() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld const layer
License requirements: None.
- WeldContourShape - Class in nxopen.weld
-
Top contour shape
- weldCpdUtils() - Method in interface nxopen.Session
-
Returns the
WeldCpdUtils
instance belonging to this session
Created in NX9.0.0
- WeldCpdUtils - Interface in nxopen.weld
-
Provides methods for access a WeldCpdUtils class object in NX.
- WeldCreationDirection - Class in nxopen.weld
-
the type of creation direction
- WeldCustom - Class in nxopen.weld
-
Settings for output solid type
- weldCustomManager() - Method in interface nxopen.Session
-
Returns the
CustomManager
belonging to this session
Created in NX8.0.0
- WeldCut - Interface in nxopen.features.shipdesign
-
Represents a weld cut feature
To create or edit an instance of this class, use
WeldCutBuilder
Created in NX7.5.0
- WeldCut2 - Interface in nxopen.features.shipdesign
-
Represents a weld cut2 feature
To create or edit an instance of this class, use
WeldCut2Builder
Created in NX8.0.1
- WeldCut2Builder - Interface in nxopen.features.shipdesign
-
- WeldCut2Builder.CreationMethod - Class in nxopen.features.shipdesign
-
Creation method used to define the placement of the weld cut
- WeldCutBuilder - Interface in nxopen.features.shipdesign
-
- WeldCutBuilder.CreationMethod - Class in nxopen.features.shipdesign
-
Creation method used to define the placement of the weld cut
- WeldDatumControlDirection - Class in nxopen.weld
-
the control direction for datum
- weldDirection() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the weld direction
License requirements: nx_masterfem ("Finite Element Modeling")
.
- weldDirectionScarEdge() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the scar edge to define weld direction
License requirements: nx_masterfem ("Finite Element Modeling")
.
- WeldFacesetIndex - Class in nxopen.weld
-
the index of user picked face sets
- WeldFeatureOutput - Class in nxopen.weld
-
Feature output
- WeldFeatureSetType - Class in nxopen.weld
-
the feature set types
- WeldFillBuilder - Interface in nxopen.weld
-
A builder used to create or edit a
Fill
feature.
- WeldFillBuilder.BoundaryMethodType - Class in nxopen.weld
-
Defines whether the initial boundary of the fill pattern is defined
by a two point rectangle or a curve.
- WeldFillBuilder.WidthAlongType - Class in nxopen.weld
-
Defines the direction the fill strip's length is aligned
- WeldFillStripBuilder - Interface in nxopen.weld
-
- WeldFillStripBuilderList - Interface in nxopen.weld
-
Represents a list of objects.
- weldFixedColor() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld fixed color
License requirements: None.
- weldgap - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData
-
- weldGapThreshold() - Method in interface nxopen.features.shipdesign.CuttingSideFacesBuilder
-
Returns the maximum distance the profile, or another plate, can be from the selected plate face.
- weldgapvalue - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetGeneralConnectionOptionsData
-
- WeldGroove - Interface in nxopen.weld
-
Represents a Weld Groove Feature
To create or edit an instance of this class, use
WeldGrooveBuilder
Created in NX9.0.0
- WeldGrooveBuilder - Interface in nxopen.weld
-
- WeldGrooveBuilder.Contour - Class in nxopen.weld
-
The options for Contour Type
- WeldGrooveBuilder.Edge - Class in nxopen.weld
-
A value indicating whether the edges have been prepared
- WeldGrooveBuilder.Prepare - Class in nxopen.weld
-
The type of edges to be prepared
- WeldGrooveBuilder.SkipWeldMethod - Class in nxopen.weld
-
The options for creating Skip Weld
- WeldGrooveBuilder.Taper - Class in nxopen.weld
-
The type of Taper Method
- WeldGrooveBuilder.Types - Class in nxopen.weld
-
The types of Groove to create
- WeldGrooveExtension - Class in nxopen.weld
-
Groove Extension Type
- WeldGrooveShape - Class in nxopen.weld
-
Groove Weld Section type
- WeldGrooveType - Class in nxopen.weld
-
Groove Creation Type
- WeldGroupIdColor - Class in nxopen.weld
-
the group id color indexes
- weldGroupIdLowerRange() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld group id lower range
License requirements: None.
- weldGroupIdUpperRange() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld group id upper range
License requirements: None.
- weldId - Variable in class nxopen.weld.WeldAdvisorBuilder.FailedObjectsData
-
weld id
- weldIdLowerRange() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld id lower range
License requirements: None.
- weldIdUpperRange() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld id upper range
License requirements: None.
- WeldImportBuilder - Interface in nxopen.weld
-
- WELDING - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an NX Structure Welding Design Control Element template
- WELDING_JOINT - Static variable in class nxopen.FileNewApplication
-
Deprecated.
Specifies an NX Structure Welding Design Feature template
- weldingCharacteristics() - Method in interface nxopen.features.shipdesign.SeamBuilder
-
Returns the welding characteristics that will be attached to each seam created.
- weldingCharacteristics() - Method in interface nxopen.weld.FilletBuilder
-
Returns the welding characteristics.
- weldingCharacteristics() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the collection of welding characteristics defined by attributes.
- weldingCharacteristics() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the collection of welding characteristics defined by attributes.
- WeldJoint - Interface in nxopen.weld
-
Represents a weld joint feature
To create or edit an instance of this class, use
WeldJointBuilder
Created in NX8.0.0
- WeldJointBuilder - Interface in nxopen.weld
-
- WeldJointBuilder.Application - Class in nxopen.weld
-
Application where joints are created.
- WeldJointBuilder.CoordinateSystem - Class in nxopen.weld
-
Coordinate system specification.
- WeldJointBuilder.DestinationTypes - Class in nxopen.weld
-
Where to create new joints.
- WeldJointBuilder.JointMidPointData - Class in nxopen.weld
-
Joint evaluation information at the mid point.
- WeldJointBuilder.MidPointInformationData - Class in nxopen.weld
-
- WeldJointBuilder.NewlyCreatedJointsData - Class in nxopen.weld
-
- WeldJointBuilder.SplitTypes - Class in nxopen.weld
-
Joint splitting options.
- WeldJointBuilder.Types - Class in nxopen.weld
-
Creation method.
- WeldJointBuilder.WeldTypes - Class in nxopen.weld
-
Weld types.
- weldJointHandler(JointExitBuilder) - Method in interface nxopen.weld.CustomManager.WeldJointHandler
-
User defined method that is called whenever a welding joint is created or updated
License requirements: None.
- WeldLabelBuilder - Interface in nxopen.weld
-
Create weld labels for multiple welds and BIW locators, this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable.
- WeldLabelBuilder.OrientationPlaneType - Class in nxopen.weld
-
This represents the Orientation Plane Type.
- weldLineGap() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the gap between the weld line and weld type symbol
License requirements: None.
- weldLineOption() - Method in interface nxopen.tooling.FlowDisplayBuilder
-
Returns the weld line option to be set
License requirements: None.
- weldLocation() - Method in interface nxopen.features.shipdesign.WeldCutBuilder
-
Returns the weld location.
- weldManager() - Method in interface nxopen.features.FeatureCollection
-
Returns the WeldManager for this part .
- WeldManager - Interface in nxopen.weld
-
Manages weld features and assistant tools.
- WeldMeasurementSizeMethod - Class in nxopen.weld
-
the size method for measurement
- weldNamePrefix() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld name prefix
License requirements: None.
- weldNumberOfLayers() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the weld number of layers
License requirements: nx_masterfem ("Finite Element Modeling")
.
- WELDNUT_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- WeldObjectBuilder - Interface in nxopen.weld
-
Represents a
WeldObjectBuilder
class used to collect welding objects created or edited from a command.
- WeldObjectBuilder.CommandName - Class in nxopen.weld
-
Commands that a callback will be invoked after dialog completion.
- WeldObjectBuilder.FeatureInfo - Class in nxopen.weld
-
Structure used to identify if each feature is newly created or edited.
- weldObjectLayer() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld object layer
License requirements: None.
- weldObjects() - Method in interface nxopen.weld.EdgePrepBuilder
-
Returns the welding joints to drive edge preparation
License requirements: None.
- weldObjects - Variable in class nxopen.weld.WeldAdvisorBuilder.FailedObjectsData
-
failed objects
- weldOffset() - Method in interface nxopen.cae.MeshControlBuilder
-
Returns the weld offset
License requirements: nx_masterfem ("Finite Element Modeling")
.
- WeldOverlapStatus - Class in nxopen.weld
-
the create status for overlap
- WeldParasetLocation - Class in nxopen.weld
-
the index of user picked refsheet location
- weldPartNumber() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld part number
License requirements: None.
- WeldPmiBuilder - Interface in nxopen.weld
-
Create PMI symbols for multiple structure welds, this builder's Commit can produce more than one object,
the GetCommittedObjects can be used to get the objects and the order of GetCommittedObject's output array is stable.
- WeldPmiBuilder.OrientationPlaneType - Class in nxopen.weld
-
This represents the Orientation Plane Type.
- WeldPoint - Interface in nxopen.weld
-
Represents a WeldPoint feature.
- WeldPointBuilder - Interface in nxopen.weld
-
- WeldPointBuilder.CsysData - Class in nxopen.weld
-
- WeldPointBuilder.FaceSetData - Class in nxopen.weld
-
- WeldPointDirection - Class in nxopen.weld
-
Spot direction
- WeldPointExitBuilder - Interface in nxopen.weld
-
Represents a
WeldPointExitBuilder
class used to pass welding object from the Weld Point command to a user callback.
- WeldPointExitBuilder.CommandName - Class in nxopen.weld
-
The command name used for the newly created features.
- WeldPointExitBuilder.FeatureInfo - Class in nxopen.weld
-
Structure used to identify newly created features.
- WeldPointExitBuilder.MethodUsed - Class in nxopen.weld
-
The method use to create the features.
- WeldPointExtendMethod - Class in nxopen.weld
-
Offset curve extend method
- WeldPointLocation - Class in nxopen.weld
-
Settings locating spot welds using guide curves/edges
- WeldPointMethod - Class in nxopen.weld
-
Settings for method
- WeldPointReferenceSheetType - Class in nxopen.weld
-
Settings for the reference sheet
- weldPoints() - Method in interface nxopen.weld.ExportWeldBuilder
-
Returns the weld points to be exported to CSV file
License requirements: ugweld ("UG WELD")
.
- WeldPointSpacingMethod - Class in nxopen.weld
-
Guide spacing method
- WeldPreferenceBuilder - Interface in nxopen.weld
-
- WeldPrepareEdges - Class in nxopen.weld
-
Settings for prepare edges
- WeldProjectionMethod - Class in nxopen.weld
-
Settings project method type
- weldRetainedColor() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld retained color
License requirements: None.
- WELDRING - Static variable in class nxopen.routing.ReuseLibrary.PartType
-
Weld Ring Post Placement Type
- weldring - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetConnectionPostPlacementData
-
Whether or not to place Weld Rings for this connection.
- weldring - Variable in class nxopen.routing.ReuseLibrary.SpecificationsGetReportInBomData
-
Report Weld Rings
- WeldRootUpdate - Class in nxopen.weld
-
Arc process type
- WeldRow - Interface in nxopen.cae
-
Represents a CAE weld row
.
- weldRowSize() - Method in interface nxopen.cae.MeshControlDisplayOptionsBuilder
-
Returns the weld row density size
License requirements: nx_masterfem ("Finite Element Modeling")
.
- welds() - Method in interface nxopen.annotations.AnnotationManager
-
Weld collection .
- welds() - Method in interface nxopen.weld.AutoWeldSymbolsBuilder
-
Returns the weld objects used to create the weld symbols in the drafting views
License requirements: None.
- weldSelection() - Method in interface nxopen.tooldesigner.MultiSectionBuilder
-
Returns the weld selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- weldSelection() - Method in interface nxopen.tooldesigner.SetGunApproachBuilder
-
Returns the weld selection
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- WeldSelectionType - Class in nxopen.weld
-
the type of selction
- weldSize() - Method in interface nxopen.annotations.LineWeldDataBuilder
-
Returns the weld size
License requirements: None.
- weldSizeCode() - Method in interface nxopen.annotations.LineWeldDataBuilder
-
Returns the weld size letter code
License requirements: None.
- weldSpaceFactor() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the weld space factor
License requirements: None.
- WeldSpacingCalcMethod - Class in nxopen.weld
-
Settings spacing method type
- weldStandard() - Method in interface nxopen.annotations.AnnotationManager
-
Returns the weld standard for the part file.
- weldStandard() - Method in interface nxopen.annotations.LineWeldData
-
Returns the standard
License requirements: None.
- WeldStandard - Class in nxopen.annotations
-
Specifies the weld standard
- WELDSTUD_FEATURE - Static variable in class nxopen.uf.UFConstants
-
- weldSymbol() - Method in interface nxopen.annotations.LineWeldDataBuilder
-
Returns the weld symbol
License requirements: None.
- weldSymbolColor() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the Weld symbol color
License requirements: None.
- weldSymbolDecimalPlaces() - Method in interface nxopen.weld.WeldPreferenceBuilder
-
Returns the weld sym dec places
License requirements: None.
- weldSymbolFont() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the Weld symbol font
License requirements: None.
- WeldSymbols() - Constructor for class nxopen.uf.UFDrf.WeldSymbols
-
- WeldSymbols(UFDrf.WeldSymInfo, UFDrf.WeldSymInfo, UFDrf.WeldSymExtType, UFDrf.WeldIdentLineType, int, int, int, int, int, String, String[], double) - Constructor for class nxopen.uf.UFDrf.WeldSymbols
-
- weldSymbolSizeFactor() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the character size factor that controls the weld symbol size.
- weldSymbolStandard() - Method in interface nxopen.annotations.SymbolPreferences
-
Returns the weld symbol standard
License requirements: None.
- weldSymbolStandard() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the weld symbol standard
License requirements: None.
- weldSymbolWidth() - Method in interface nxopen.annotations.SymbolStyleBuilder
-
Returns the Weld symbol width
License requirements: None.
- WeldSymInfo() - Constructor for class nxopen.uf.UFDrf.WeldSymInfo
-
- WeldSymInfo(UFDrf.WeldFinishTypes, UFDrf.WeldContourTypes, UFDrf.WeldSymbolTypes, UFDrf.WeldSizeCode, String, String, String, String) - Constructor for class nxopen.uf.UFDrf.WeldSymInfo
-
- weldSymmetric() - Method in interface nxopen.weld.WeldGrooveBuilder
-
Returns a value indicating whether the second depth is the same as the first depth
License requirements: ugweld ("UG WELD")
.
- WeldTaperMethod - Class in nxopen.weld
-
Settings for groove taper method
- weldType() - Method in interface nxopen.cae.CAEWeldConnectionBuilder
-
Returns the weld connection type
License requirements: None.
- weldType - Variable in class nxopen.uf.UFDrf.WeldSymInfo
-
- weldType() - Method in interface nxopen.weld.AutoPointBuilder
-
- weldType() - Method in interface nxopen.weld.JointItemBuilder
-
Returns the weld type
License requirements: None.
- weldType() - Method in interface nxopen.weld.PointMarkBuilder
-
Returns the weld type references in the customer defaults to create.
- weldType() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the weld type
License requirements: None.
- weldType() - Method in interface nxopen.weld.WeldPointBuilder
-
Returns the weld type.
- WELL_CONSTRAINED - Static variable in class nxopen.Sketch.Status
-
The sketch is fully constrained
- WELL_CONSTRAINED - Static variable in class nxopen.uf.UFSket.Status
-
- WELL_DEFINED - Static variable in class nxopen.positioning.Network.ObjectStatus
-
The constraint is solved and satisfied
- WESTERN - Static variable in class nxopen.features.TextBuilder.ScriptOptions
-
Specifies the English character set
- WHEEL_CENTER_POINT - Static variable in class nxopen.features.vehicledesign.BaseDataWheelBuilder.PositionDefinitionOptions
-
- WHEEL_CONTACT - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.ObjectPositionType
-
- WHEEL_EXTENTS - Static variable in class nxopen.features.vehicledesign.WheelFixingBuilder.ObjectPositionType
-
- WHEEL_PLANE - Static variable in class nxopen.features.vehicledesign.WheelCoveringBuilder.SurfacePlaneType
-
The checking surface is coplanar to the ourside of the wheels
- wheelAngle() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the wheel angle.
- wheelCenterlineShift() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the wheel centerline shift.
- WheelCovering - Interface in nxopen.features.vehicledesign
-
Represents a wheel covering feature
To create or edit an instance of this class, use
WheelCoveringBuilder
Created in NX8.5.0
- WheelCoveringBuilder - Interface in nxopen.features.vehicledesign
-
Represents a
WheelCovering
feature builder for wheel covering surface section checking.
- WheelCoveringBuilder.PositionType - Class in nxopen.features.vehicledesign
-
Represents the wheel covering positions.
- WheelCoveringBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
-
Represents the requirements control types to define the wheel covering.
- WheelCoveringBuilder.SurfacePlaneType - Class in nxopen.features.vehicledesign
-
Represents the type of the surface plane.
- WheelCoveringBuilder.SurfaceSectionType - Class in nxopen.features.vehicledesign
-
Represents the type of the surface section.
- wheelCsys() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the coordinate system defining the orientation of the wheel.
- wheelDiameter() - Method in interface nxopen.features.vehicledesign.ManikinBuilder
-
Returns the wheel diameter.
- WheelFixing - Interface in nxopen.features.vehicledesign
-
Represents a wheel fixing feature
To create or edit an instance of this class, use
WheelFixingBuilder
Created in NX8.5.0
- WheelFixingBuilder - Interface in nxopen.features.vehicledesign
-
Represents a
WheelFixing
builder used to
create or edit a vehicle design wheel fixing.
- WheelFixingBuilder.ObjectPositionType - Class in nxopen.features.vehicledesign
-
Represents the object position used to indicate if the wheel fixing is positioned at the theoretically
widest dimension of the wheel (diameter) or exactly at the wheel geometry of the base data.
- WheelFixingBuilder.PositionType - Class in nxopen.features.vehicledesign
-
Represents the wheel fixing positions.
- WheelFixingBuilder.RequirementsControlType - Class in nxopen.features.vehicledesign
-
Represents the requirements control types to define the wheel fixing.
- WheelFixingBuilder.ShapeType - Class in nxopen.features.vehicledesign
-
Represents the shape used to indicate if the wheel fixing is a block or a circle segment.
- WheelFixingBuilder.WheelSizeType - Class in nxopen.features.vehicledesign
-
Represents the wheel size used to indicate if the wheel fixing is based on static radius or the diameter of the wheels.
- wheelGlobal() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the wheel center global.
- wheelPositionDefinition() - Method in interface nxopen.features.vehicledesign.BaseDataBuilder
-
Returns the wheel position definition option of the vehicle.
- wheelProtrusionPoint() - Method in interface nxopen.features.vehicledesign.MirrorCertificationBuilder
-
Returns the wheel protrusion point used to calculate close targets near the rear axle centerline.
- wheelRimDiameter() - Method in interface nxopen.features.vehicledesign.TireEnvelopeBuilder
-
Returns the expression containing the diameter of the wheel rim.
- wheelRoadRef() - Method in interface nxopen.motion.TirePropertyCdBuilder
-
Returns the wheel center road reference frame.
- wheelSize() - Method in interface nxopen.features.vehicledesign.DynamicCurbBuilder
-
Returns the wheel size option which determines the size of the wheels in the dynamic curb.
- wheelSize() - Method in interface nxopen.features.vehicledesign.GroundClearanceBuilder
-
Returns the wheel size definition.
- wheelSize() - Method in interface nxopen.features.vehicledesign.InnerAngleBuilder
-
Returns the wheel size type which determines the size of the wheels in the inner angle.
- wheelSize() - Method in interface nxopen.features.vehicledesign.SlopeBuilder
-
Returns the wheel size used in the slope.
- wheelSize() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
Returns the wheel size of the wheel fixing.
- whereIsPartUsed(Tag) - Method in interface nxopen.uf.UFAssem
-
- WhereIsPartUsedData() - Constructor for class nxopen.uf.UFAssem.WhereIsPartUsedData
-
- WhereIsPartUsedReturn - Variable in class nxopen.uf.UFAssem.WhereIsPartUsedData
-
- whereUsedReport(String, String, int, boolean) - Method in interface nxopen.uf.UFAssem
-
- WHILE - Static variable in class nxopen.tooling.MotionSimulationBuilder.EjectorMoveOptions
-
Eject product while mold opening
- WHITE - Static variable in class nxopen.cae.xyplot.UnknownResultColor
-
white
- WHITE - Static variable in class nxopen.display.TrueShadingBuilder.BgdType
-
Plain light Colored background
- WHITE - Static variable in class nxopen.uf.UFDisp.BackgroundColor
-
- WHITE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- whiteBackground() - Method in interface nxopen.PrintBuilder
-
Returns the white background option.
- WHOLE_ASSEMBLY - Static variable in class nxopen.assemblies.ComponentAssembly.OpenOption
-
Open the component and all of its children
- WHOLE_BODY - Static variable in class nxopen.geometricutilities.PartModuleInputBuilder.ModifiableGeometryOptions
-
the whole shared body will be allowed for selection inside part module
- WHOLE_DEGREES - Static variable in class nxopen.annotations.AngularDimensionFormat
-
Specifies whole degrees format
- WHOLE_DEGREES - Static variable in class nxopen.preferences.AngleFormat
-
Whole degrees only, e.g. 30 degrees
- WHOLE_DEGREES - Static variable in class nxopen.uf.UFDrf.AngularUnits
-
- WHOLE_SUB_DIEBASE - Static variable in class nxopen.tooling.DieBaseBuilder.SplitMethod
-
select whole sub-diebase
- wholeProjectToggle() - Method in interface nxopen.ame.ReportsSettingsBuilder
-
Returns the whole project toggle
License requirements: ad_automation_design ("FULL AUTOMATION DESIGNER")
.
- WIDE_BAND_DIRLIK - Static variable in class nxopen.cae.DurabilityRandomFatigueBuilder.RandomFatigueMethodEnum
-
WideBandDirlik
- WIDE_COLLAR_PLATE - Static variable in class nxopen.features.shipdesign.ExamineSteelFeatureBuilderCheck
-
Check wide collar plate
- WIDE_STRING - Static variable in class nxopen.uistyler.Dialog.ItemType
-
- WIDE_STRING - Static variable in class nxopen.uistyler.StylerItem.ItemType
-
Wide String item
- WideString - Interface in nxopen.uistyler
-
Represents a WideString for UI Styler .
- WideString.Activate - Interface in nxopen.uistyler
-
Called when a dialog user enters a character string and presses Return.
- wideValue() - Method in interface nxopen.blockstyler.StringBlock
-
- width() - Method in interface nxopen.annotations.AutomaticCenterlineBuilder
-
Returns the width
License requirements: None.
- width() - Method in interface nxopen.annotations.CenterlineSettingsBuilder
-
Returns the width of centerline
License requirements: None.
- width() - Method in interface nxopen.annotations.DatumTargetBuilder
-
Returns the width
License requirements: None.
- width() - Method in interface nxopen.annotations.EditSymbolDisplayBuilder
-
Returns the enum width
License requirements: None.
- width() - Method in interface nxopen.annotations.ForeshorteningSymbolSettingsBuilder
-
Returns the foreshortening symbol width
License requirements: None.
- width() - Method in interface nxopen.annotations.HatchBuilder
-
- width() - Method in interface nxopen.annotations.HatchFillSettingsBuilder
-
Returns the width
License requirements: None.
- width() - Method in interface nxopen.annotations.IntersectionSymbolBuilder
-
Returns the width
License requirements: None.
- width - Variable in class nxopen.annotations.LineCfw
-
- width() - Method in interface nxopen.annotations.OffsetCenterPointBuilder
-
Returns the width
License requirements: None.
- width() - Method in interface nxopen.annotations.RegionBuilder
-
- width() - Method in interface nxopen.annotations.TargetPointBuilder
-
Returns the width
License requirements: None.
- width - Variable in class nxopen.annotations.TextCfw
-
- width - Variable in class nxopen.assemblies.WaveQuery.PartPreviewData
-
width of preview image
- width - Variable in class nxopen.BasePart.PreviewImageData
-
image width
- width() - Method in interface nxopen.blockstyler.DrawingArea
-
Returns the Width
License requirements: None.
- width() - Method in interface nxopen.blockstyler.MultilineString
-
Returns the Width
License requirements: None.
- width() - Method in interface nxopen.blockstyler.ScrolledWindow
-
Returns the Width
License requirements: None.
- width() - Method in interface nxopen.blockstyler.Tree
-
Returns the Width
License requirements: None.
- width - Variable in class nxopen.cae.BoxBoundingVolume.CsysEdgelengthsData
-
- width() - Method in interface nxopen.cae.connections.IWidth
-
Returns the width value
License requirements: None.
- width - Variable in class nxopen.cae.modelcheck.ElementEdgeCheckBuilder.EdgeDisplayStyle
-
line width
- width() - Method in interface nxopen.cae.xyplot.BaseBarStyleSetting
-
Returns the bar width.
- width() - Method in interface nxopen.cae.xyplot.BaseLineStyleSetting
-
Returns the line width
License requirements: None.
- width() - Method in interface nxopen.cae.xyplot.ICurveDisplaySettings
-
Returns the line width
License requirements: None.
- width() - Method in interface nxopen.cam.InspectionCparlnFeatureBuilder
-
Returns the width of the bounded slot or tab
License requirements: None.
- width() - Method in interface nxopen.cam.InspectionParplnFeatureBuilder
-
Returns the width of the parpln slot/tab
License requirements: None.
- WIDTH - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.TolType
-
Width
- width() - Method in interface nxopen.cam.LaserCutoutDefinition
-
Returns the Width
License requirements: None.
- width() - Method in interface nxopen.cam.TrochoidalSettings
-
Returns the path width distance
License requirements: None.
- width() - Method in interface nxopen.ColorWidth
-
Returns the width associated with the color
License requirements: None.
- width() - Method in interface nxopen.CustomWidth
-
Returns the width of lines for the custom width
License requirements: None.
- width() - Method in interface nxopen.diagramming.SheetBordersAndZonesBuilder
-
Returns the width of border.
- width - Variable in class nxopen.diagramming.SheetBuilder.SizeData
-
- width() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the width.
- width - Variable in class nxopen.diagramming.tables.SizedSymbol
-
The symbol width
- width() - Method in interface nxopen.die.FingerClearanceNotchBuilder
-
Returns the expression containing the value for the clearance to provide on either side of the notch.
- width() - Method in interface nxopen.die.HandlingCoreBuilder
-
Returns the expression containing the value to use for the width of the core.
- width() - Method in interface nxopen.die.HandlingCoreChildBuilder
-
Returns the width of the handling core.
- width() - Method in interface nxopen.die.HandlingCoreParentBuilder
-
Returns the width of handling cores.
- width() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the width with respect to the coordinate system
License requirements: None.
- width() - Method in interface nxopen.die.KeywayChildBuilder
-
Returns the width of the keyway.
- width() - Method in interface nxopen.die.KeywayParentBuilder
-
Returns the width of keyways.
- width() - Method in interface nxopen.die.PadChildBuilder
-
Returns the width of the die pad.
- width() - Method in interface nxopen.die.PadParentBuilder
-
Returns the width of die pads.
- width() - Method in interface nxopen.die.PierceHoleChildBuilder
-
Returns the width of the pierce hole
License requirements: ug_die_design ("Die Design")
.
- width() - Method in interface nxopen.die.PierceHoleParentBuilder
-
Returns the width of pierce holes
License requirements: ug_die_design ("Die Design")
.
- width() - Method in interface nxopen.display.ImageBaseBuilder
-
- width() - Method in interface nxopen.drawings.BordersAndZonesBuilder
-
- width() - Method in interface nxopen.drawings.BrokenViewBuilder
-
Returns the curve width of the break line
License requirements: None.
- width() - Method in interface nxopen.drawings.SectionLineStyleBuilder
-
- width() - Method in interface nxopen.drawings.ViewStyleFPCurvesBuilder
-
Returns the width on the Curve section of the Flat Pattern tab of the View Style Dialog
License requirements: None.
- width() - Method in interface nxopen.drawings.ViewStyleHiddenLinesBuilder
-
Returns the width on the HIDDEN LINES tab of the View Style Dialog
License requirements: None.
- width() - Method in interface nxopen.drawings.ViewStyleSmoothEdgesBuilder
-
Returns the width on the SMOOTH EDGES tab of the View Style Dialog
License requirements: None.
- width() - Method in interface nxopen.drawings.ViewStyleVirtualIntersectionsBuilder
-
Returns the width on the VIRTUAL INTERSECTIONS tab of the View Style Dialog
License requirements: None.
- width() - Method in interface nxopen.features.BlockFeatureBuilder
-
Returns the expression representing the block width.
- width() - Method in interface nxopen.features.CurveFeature
-
Returns the width of the feature
License requirements: None.
- width() - Method in interface nxopen.features.sheetmetal.BeadBuilder
-
Returns the width of the bead.
- width() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the width
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- width() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the width
License requirements: None.
- width() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the width value for the Gusset
License requirements: None.
- width() - Method in interface nxopen.features.sheetmetal.LouverBuilder
-
Returns the width of the louver.
- width() - Method in interface nxopen.features.shipdesign.PenetrationAssociationBuilder
-
Returns the width expression
License requirements: None.
- width() - Method in interface nxopen.features.shipdesign.PenetrationCutoutBuilder
-
Returns the width expression
License requirements: None.
- width() - Method in interface nxopen.features.shipdesign.PenetrationRequestBuilder
-
Returns the width expression
License requirements: None.
- width() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Returns the expression containing the scale factor for the width direction (Y).
- WIDTH - Static variable in class nxopen.features.shipdesign.SeamBuilder.StaggerShiftAlongMethods
-
the stagger will shift along the width direction.
- width() - Method in interface nxopen.features.shipdesign.ShipDesignPreferencesBuilder
-
Returns the default width to use for the current ship structure type.
- width() - Method in interface nxopen.features.shipdesign.ShipFlatPatternBuilder
-
- width() - Method in interface nxopen.features.vehicledesign.BaseDataLoadingWheelBuilder
-
Returns the width of front or rear width, it's value is sum of wheel width and delta width.
- width() - Method in interface nxopen.features.vehicledesign.BaseDataWheelBuilder
-
Returns the width of the wheel.
- width() - Method in interface nxopen.LineWidthBuilder
-
Returns the width.
- width - Variable in class nxopen.markup.Rectangle.CenterLengthAndWidthData
-
- width() - Method in interface nxopen.mechatronics.CollisionShapeBuilder
-
Returns the width.
- width() - Method in interface nxopen.motion.RoadBuilder
-
Returns the width
License requirements: mechanisms ("MECHANISMS")
.
- width() - Method in interface nxopen.preferences.PartDrafting
-
Returns the line width of the retained
Annotation
objects
License requirements: None.
- width - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.FlatPatternObjectTypeDisplay
-
Object width
- width - Variable in class nxopen.preferences.PartFlexiblePrintedCircuitDesign.PlanarSegmentCurveTypeDisplayData
-
Curve width
- width - Variable in class nxopen.preferences.PartSheetmetal.FlatPatternObjectTypeDisplay
-
Object width
- width - Variable in class nxopen.preferences.PartSheetmetal.TabCurveTypeDisplayData
-
Curve width
- Width - Class in nxopen.preferences
-
Represents the line width
- width - Variable in class nxopen.report.ReportManager.OriginalImageDimensionData
-
- width() - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Returns the width of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- width - Variable in class nxopen.routing.PathStockBuilder.RectangularDimensionsData
-
- width - Variable in class nxopen.sheetmetal.FlatPatternSettings.FlatPatternObjectTypeDisplay
-
Object width
- width() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the width of the strip.
- width() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the width.
- width() - Method in interface nxopen.tooling.ReusePositioningObjectBuilder
-
Returns the width value of pattern
License requirements: None.
- width() - Method in interface nxopen.tooling.StripperVentingBuilder
-
Returns the width of venting hole
License requirements: None.
- width - Variable in class nxopen.uf.UFCgm.WidthColor
-
- width - Variable in class nxopen.uf.UFCgm.WidthCustom
-
- width - Variable in class nxopen.uf.UFDrf.AskRetainColorFontWidthData
-
- width - Variable in class nxopen.uf.UFDrf.Cfw
-
- width - Variable in class nxopen.uf.UFDrf.HatchFillPreferences
-
- width - Variable in class nxopen.uf.UFDrf.ImageData
-
- width - Variable in class nxopen.uf.UFDrf.TextCfw
-
- width - Variable in class nxopen.uf.UFModl.AskDovetailSlotParmsData
-
- width - Variable in class nxopen.uf.UFModl.AskRectSlotParmsData
-
- width - Variable in class nxopen.uf.UFModl.AskUSlotParmsData
-
- width - Variable in class nxopen.uf.UFModl.FlangeData
-
- width - Variable in class nxopen.uf.UFModl.SmslotData
-
- width - Variable in class nxopen.uf.UFModlFeatures.AskRectGrooveParmsData
-
- width - Variable in class nxopen.uf.UFModlFeatures.AskUGrooveParmsData
-
- width - Variable in class nxopen.uf.UFObj.CreSettings
-
- width - Variable in class nxopen.uf.UFPlist.FieldFormat
-
- width - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- width - Variable in class nxopen.uf.UFView.VdeData
-
- width - Variable in class nxopen.uf.UFView.VdeDataAndType
-
- width() - Method in interface nxopen.weld.SurfaceWeldBuilder
-
Returns the expression containing the value of the width of the surface weld if only the centerline is specified.
- width() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the width of the rectangles.
- width1() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the width1
License requirements: None.
- width1ScaleFactor() - Method in interface nxopen.PrintBuilder
-
Returns the width1 scale factor.
- width2() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the width2
License requirements: None.
- width2ScaleFactor() - Method in interface nxopen.PrintBuilder
-
Returns the width2 scale factor.
- width3ScaleFactor() - Method in interface nxopen.PrintBuilder
-
Returns the width3 scale factor.
- width4ScaleFactor() - Method in interface nxopen.PrintBuilder
-
Returns the width4 scale factor.
- width5ScaleFactor() - Method in interface nxopen.PrintBuilder
-
Returns the width5 scale factor.
- width6ScaleFactor() - Method in interface nxopen.PrintBuilder
-
Returns the width6 scale factor.
- width7ScaleFactor() - Method in interface nxopen.PrintBuilder
-
Returns the width7 scale factor.
- width8ScaleFactor() - Method in interface nxopen.PrintBuilder
-
Returns the width8 scale factor.
- width9ScaleFactor() - Method in interface nxopen.PrintBuilder
-
Returns the width9 scale factor.
- WIDTH_AND_ANGLE - Static variable in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.MethodType
-
- WIDTH_AND_HEIGHT - Static variable in class nxopen.annotations.ForeshorteningSymbolSettingsBuilder.MethodType
-
- WIDTH_BY_COLOR - Static variable in class nxopen.uf.UFCgm.WidthUse
-
- WIDTH_BY_WIDTH - Static variable in class nxopen.uf.UFCgm.WidthUse
-
- WIDTH_CUSTOM - Static variable in class nxopen.uf.UFCgm.WidthSingle
-
- WIDTH_EIGHT - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Width Eight
- WIDTH_EIGHT - Static variable in class nxopen.preferences.PartObject.WidthType
-
- WIDTH_FIVE - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Width Five
- WIDTH_FIVE - Static variable in class nxopen.preferences.PartObject.WidthType
-
- WIDTH_FOUR - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Width Four
- WIDTH_FOUR - Static variable in class nxopen.preferences.PartObject.WidthType
-
- WIDTH_LENGTH_HEIGHT - Static variable in class nxopen.features.vehicledesign.VehicleCoordinateSystemBuilder.Types
-
Nissan
- WIDTH_NINE - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Width Nine
- WIDTH_NINE - Static variable in class nxopen.preferences.PartObject.WidthType
-
- WIDTH_ONE - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Width One
- WIDTH_ONE - Static variable in class nxopen.preferences.PartObject.WidthType
-
- WIDTH_SEVEN - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Width Seven
- WIDTH_SEVEN - Static variable in class nxopen.preferences.PartObject.WidthType
-
- WIDTH_SINGLE - Static variable in class nxopen.uf.UFCgm.WidthUse
-
- WIDTH_SIX - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Width Six
- WIDTH_SIX - Static variable in class nxopen.preferences.PartObject.WidthType
-
- WIDTH_STD - Static variable in class nxopen.uf.UFCgm.WidthSingle
-
- WIDTH_THREE - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Width Three
- WIDTH_THREE - Static variable in class nxopen.preferences.PartObject.WidthType
-
- WIDTH_TWO - Static variable in class nxopen.drawings.BrokenViewBuilder.LineWidth
-
Width Two
- WIDTH_TWO - Static variable in class nxopen.preferences.PartObject.WidthType
-
- WIDTH_USER - Static variable in class nxopen.uf.UFCgm.WidthSingle
-
- widthAlong() - Method in interface nxopen.weld.WeldFillBuilder
-
Returns the width of the rectangles will be measured along this direction.
- widthAsString() - Method in interface nxopen.blockstyler.StringBlock
-
Returns the Width as string
License requirements: None.
- WidthColor() - Constructor for class nxopen.uf.UFCgm.WidthColor
-
- WidthColor(double, int) - Constructor for class nxopen.uf.UFCgm.WidthColor
-
- WidthCustom() - Constructor for class nxopen.uf.UFCgm.WidthCustom
-
- WidthCustom(double, String) - Constructor for class nxopen.uf.UFCgm.WidthCustom
-
- WidthDefinition - Interface in nxopen
-
Represents a
WidthDefinition
, which is a representation of an NX width
palette.
- widthDimension() - Method in interface nxopen.features.ShelfBuilder
-
Returns the width dimension
License requirements: None.
- widthDimensionType() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the width dimension type
License requirements: None.
- widthDir - Variable in class nxopen.uf.UFDrf.ImageData
-
- widthDirection() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the width direction.
- widthExpression - Variable in class nxopen.uf.UFGdt.UnitBasis
-
- widthFactorMode() - Method in interface nxopen.DxfdwgCreator
-
Returns the autocad widthfactor calculation method - this will decide the acad widthfactor method to be used.
- widthMethod() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the width method
License requirements: None.
- widthOffset() - Method in interface nxopen.features.AeroFlangeBuilder
-
Returns the width offset
License requirements: None.
- widthOption() - Method in interface nxopen.features.sheetmetal.FlangeBendPropertiesBuilder
-
Returns the width option
License requirements: None.
- widthOption() - Method in interface nxopen.LineWidthBuilder
-
- WidthOptionsData() - Constructor for class nxopen.preferences.PartVisualizationLine.WidthOptionsData
-
- widthPercent - Variable in class nxopen.uf.UFSfLegend.Attr
-
- widthPercent - Variable in class nxopen.uf.UFSfLegend.IndexColorAttr
-
- widthPolicy() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the width policy.
- widths() - Method in interface nxopen.CGMBuilder
-
Returns the width option.
- widths() - Method in interface nxopen.PlotColorsWidthsBuilder
-
Returns the width option.
- widths() - Method in interface nxopen.PrintPDFBuilder
-
Returns the width option.
- widths - Variable in class nxopen.uf.UFCgm.ExportOptions
-
- widths - Variable in class nxopen.uf.UFPlot.JobOptions
-
- widthScale() - Method in interface nxopen.display.DecalBuilder
-
Returns the decal width scale
License requirements: None.
- widthscale - Variable in class nxopen.preferences.PartVisualizationLine.PixelWidthOptionsData
-
the width scale option, which controls scaling of widths in the
graphics window when useWidthScale is true.
- widthScale - Variable in class nxopen.preferences.PartVisualizationLine.WidthOptionsData
-
the width scale option, which controls scaling of the width
of lines and curves displayed in the graphics window.
- widthScale() - Method in interface nxopen.preferences.PartVisualizationLine
-
Returns the width scale option.
- widthSide() - Method in interface nxopen.features.sheetmetal.GussetBuilder
-
Returns the width side
Defines the side of the profile to which material should be added or from which material should be removed to construct
the feature.
- widthSource() - Method in interface nxopen.ColorWidth
-
Returns the width entry source.
- widthSource - Variable in class nxopen.uf.UFCgm.WidthColor
-
- widthTolerance() - Method in interface nxopen.geometricutilities.DisplayResolutionBuilder
-
Returns the width tolerance
License requirements: None.
- widthTolerance - Variable in class nxopen.preferences.PartVisualizationShade.AdvVisViewFacetTolerancesData
-
- widthType() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the width enum
License requirements: None.
- widthType() - Method in interface nxopen.features.sheetmetal.BridgeTransitionBuilder
-
Returns the width type
License requirements: nx_flexible_pcb ("NX Flexible PCB") OR nx_sheet_metal ("NX Sheet Metal")
.
- widthType() - Method in interface nxopen.features.sheetmetal.FlangeBuilder
-
Returns the width type for flange.
- widthType - Variable in class nxopen.uf.UFUgfont.FontHeader
-
- widthValue() - Method in interface nxopen.annotations.SearchCriteriaDatumTargetBuilder
-
Returns the width value
License requirements: None.
- widthValueAsString() - Method in interface nxopen.blockstyler.TextColorFontWidth
-
Returns the width value.
- widthY() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilder
-
- widthY() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the width in Y direction.
- widthY() - Method in interface nxopen.features.vehicledesign.WheelFixingBuilder
-
Returns the expression that contains the value which indicates the Width Y of the wheel fixing when the shape is block.
- WIND_CATCHER - Static variable in class nxopen.routing.CustomManager.DesignRuleReason
-
Called after the Wind Catcher command.
- WindCatcher - Interface in nxopen.routing
-
Represents a Wind Catcher feature.
- WindCatcherBuilder - Interface in nxopen.routing
-
Builder class for Wind Catcher feature.
- WindCatcherBuilder.WindCatcherType - Class in nxopen.routing
-
Specifies the type of Wind Catcher.
- windCatcherDuct() - Method in interface nxopen.routing.WindCatcherBuilder
-
Returns the duct on which the Wind Catcher attaches.
- WINDOW - Static variable in class nxopen.ListingWindow.DeviceType
-
The UI's Information window
- WINDOW_MACROS - Static variable in class nxopen.ame.PlcSymbolsEvaluatorBuilder.FilterType
-
- WINDOW_SELECTION - Static variable in class nxopen.tooling.HoleReportBuilder.EnumSelectionType
-
Selects holes in window to create hole table
- windowCurveGeometry() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the curves representing the window geometry to use as non-obstructing elements.
- windowdevice - Variable in class nxopen.cae.xyplot.Plot.DeviceAndViewIndexData
-
the device of window
- windowFaceGeometry() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the faces representing the window geometry to use as non-obstructing elements.
- windowFaces() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the faces selection used to identify the vehicle window surfaces.
- windowFacetBodies() - Method in interface nxopen.features.vehicledesign.CloseRangeVisibilityBuilder
-
Returns the faces selection used to identify the vehicle window facet bodies.
- WindowManager - Interface in nxopen.cae.xyplot
-
Manages the separate graphic windows.
- windowManager() - Method in interface nxopen.cae.xyplot.XYPlotManager
-
- WINDOWS - Static variable in class nxopen.features.vehicledesign.AllAroundVisionBuilder.Types
-
Windows as non-obstructing geometry.
- windowType() - Method in interface nxopen.features.vehicledesign.AllAroundVisionBuilder
-
Returns the type of geometry used to define the window.
- windshield() - Method in interface nxopen.features.vehicledesign.PedestrianProtectionBuilder
-
Returns the collector containing the faces of the windshield
License requirements: None.
- WindshieldDatum - Interface in nxopen.features.vehicledesign
-
Represents a windshield datum feature.
- WindshieldDatumBuilder - Interface in nxopen.features.vehicledesign
-
Represents a
WindshieldDatum
builder used to create or edit a Windshield Datum.
- WindshieldDatumBuilder.CustomVisionAngle - Class in nxopen.features.vehicledesign
-
Represents the vision angle type to define the Windshield Datum.
- WindshieldDatumBuilder.EnumEyeType - Class in nxopen.features.vehicledesign
-
Represents the eye definition type to define the Windshield Datum.
- windshieldEdge() - Method in interface nxopen.features.vehicledesign.HeadImpactFrontHeaderWizardBuilder
-
- windshieldTrim() - Method in interface nxopen.features.vehicledesign.HeadImpactAPillarWizardBuilder
-
Returns the windshield trim geometry.
- windshieldTrim() - Method in interface nxopen.features.vehicledesign.HeadImpactUpperRoofWizardBuilder
-
Returns the windshield trim geometry.
- WIPE - Static variable in class nxopen.die.DieAssistantFlangeProfileType
-
Wipe flange steel.
- WIPE - Static variable in class nxopen.die.ThroatChildBuilder.TypeOption
-
Throat section is built for a wipe operation.
- WIPE - Static variable in class nxopen.die.ThroatParentBuilder.TypeOption
-
Throat is built for a wipe operation.
- WIRE - Static variable in class nxopen.formboard.UpdateDiscrepancy.ObjectType
-
Wire connection.
- WIRE - Static variable in class nxopen.preferences.RoutingPartLibrary.RootType
-
Top node for selecting wires.
- WIRE - Static variable in class nxopen.routing.RouteManager.FindObjectType
-
- WIRE - Static variable in class nxopen.routing.RouteManager.RootType
-
Top node for selecting wires.
- Wire - Interface in nxopen.routing
-
The Routing Wire object is the set of information needed to define
a ROUTE_wire.
- WIRE_COMP_AUTO - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the AutoAssign command.
- WIRE_COMP_MANUAL - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Manual Assign command.
- WIRE_COMP_PROXY - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Assign Proxy command.
- WIRE_COMPONENT - Static variable in class nxopen.routing.RouteManager.PartType
-
- WIRE_EDMSTART_HOLES - Static variable in class nxopen.tooling.FaceColorManagementBuilder.HoleTypeEnumValue
-
- WIRE_LIST - Static variable in class nxopen.ame.DocumentType
-
- WIRE_LIST - Static variable in class nxopen.ame.PageBuilder.Types
-
- WIRE_ROUTE_AUTO - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the AutoRoute command.
- WIRE_ROUTE_MANUAL - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Manual Route command.
- WIRE_TERMINALS - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Model Terminals command.
- WIRE_TUBE_CONNECTION_LISTS - Static variable in class nxopen.ame.DocumentType
-
- WIRE_TUBE_CONNECTION_LISTS - Static variable in class nxopen.ame.PageBuilder.Types
-
- WIRE_TYPE - Static variable in class nxopen.ame.ElectricalAnnotationSettingsBuilder.AnnotationAttrType
-
- WIRE_UNCOMP - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Unassign Component command.
- WIRE_UNROUTE - Static variable in class nxopen.routing.CustomManager.CallbackReason
-
Called after the Unroute command.
- WireCollection - Interface in nxopen.routing
-
The Routing Wire object is a list of segments in a route and some
stock.
- WireDevice - Interface in nxopen.routing.electrical
-
- wireDiameter() - Method in interface nxopen.cam.WedmBasedGeomBuilder
-
Returns the Wire Diameter
License requirements: cam_base ("CAM BASE")
.
- wireDiameterBuilder() - Method in interface nxopen.cam.WedmCutParameters
-
Returns the wire_diameter builder
License requirements: cam_base ("CAM BASE")
.
- WireEdmFeedRateData() - Constructor for class nxopen.cam.CAMObject.WireEdmFeedRateData
-
- wireEDMStartHoles() - Method in interface nxopen.annotations.HoleTableSettingsHoleFiltersBuilder
-
Returns the wire EDM start holes
License requirements: None.
- WIREFRAME - Static variable in class nxopen.cae.ModelDisplayBuilder.ElemQualPass
-
Draw passing elements wireframe
- WIREFRAME - Static variable in class nxopen.cae.Post.EdgeStyle
-
- WIREFRAME - Static variable in class nxopen.drawings.ViewWorkflowBuilder.Style
-
- wireFrame() - Method in interface nxopen.JtCreator
-
Returns the wireFrame * - Controls translation of wireframe and point entities to JT file
License requirements: None.
- WIREFRAME - Static variable in class nxopen.preferences.PartDrafting.ViewStyleType
-
Wireframe
- WIREFRAME - Static variable in class nxopen.preferences.ShadingRenderingStyleOption
-
Wireframe
- WIREFRAME - Static variable in class nxopen.preferences.ViewVisualizationVisual.DisplayModeType
-
Deprecated.
View is displayed as a wireframe-model
- WIREFRAME - Static variable in class nxopen.preferences.ViewVisualizationVisual.RenderingStyle
-
- WIREFRAME - Static variable in class nxopen.PrintBuilder.OutputOption
-
Wireframe in Original Color
- WIREFRAME_BLACK_WHITE - Static variable in class nxopen.PrintBuilder.OutputOption
-
Wireframe in Black and White
- WIREFRAME_STYLE - Static variable in class nxopen.uf.UFView.RenderingStyle
-
- WIREFRAME_WITH_DASHED_EDGES - Static variable in class nxopen.View.RenderingStyleType
-
- WIREFRAME_WITH_DIM_EDGES - Static variable in class nxopen.View.RenderingStyleType
-
- WIREFRAME_WITH_HIDDEN_EDGES - Static variable in class nxopen.View.RenderingStyleType
-
- WireframeBlendOptions() - Constructor for class nxopen.preferences.PartVisualizationEmphasis.WireframeBlendOptions
-
- WireframeBlendOptions(NXColor, int) - Constructor for class nxopen.preferences.PartVisualizationEmphasis.WireframeBlendOptions
-
Constructor for the WireframeBlendOptions object.
- wireframeColorSource() - Method in interface nxopen.drawings.GeneralViewStyle
-
Returns the source of the wireframe color for a member view.
- wireframeColorSource() - Method in interface nxopen.drawings.ViewStyleGeneralBuilder
-
Returns the wireframe color source option on the GENERAL tab of the View Style Dialog
License requirements: None.
- wireframeColorSource() - Method in interface nxopen.preferences.GeneralViewPreferences
-
Returns the source of the wireframe color for a member view.
- wireframeContrast() - Method in interface nxopen.preferences.VisualizationLine
-
Returns whether colors applied to wireframe geometry are automatically adjusted as necessary to produce a minimum contrast relative to the view background.
- wireframeGeometryImportColor() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the wireframe geometry import color for I-DEAS
License requirements: None.
- wireframeGeometryImportLayer() - Method in interface nxopen.preferences.SessionNXGateway
-
Returns the wireframe geometry import layer for I-DEAS
License requirements: None.
- WireGuide - Interface in nxopen.cam
-
- WireGuideList - Interface in nxopen.cam
-
Represents a list of objects.
- wireGuideList() - Method in interface nxopen.cam.WireTool
-
Returns the wire guide list
License requirements: cam_base ("CAM BASE")
.
- wireHole() - Method in interface nxopen.tooling.ToolingManager
-
Returns the WireHole instance belonging to this part .
- WireHoleBuilder - Interface in nxopen.tooling
-
- WireHoleBuilder.Types - Class in nxopen.tooling
-
the plane to create wire hole sketch
- WireHoleCollection - Interface in nxopen.tooling
-
- wirePosition() - Method in interface nxopen.cam.WedmCutParameters
-
Returns the wire position
License requirements: cam_base ("CAM BASE")
.
- wires() - Method in interface nxopen.routing.RouteManager
-
Wire Collection .
- wires - Variable in class nxopen.uf.UFRoute.AskHarnessWiresData
-
- wires - Variable in class nxopen.uf.UFRoute.AskSegmentWiresData
-
- wires - Variable in class nxopen.uf.UFRoute.AskStockWiresData
-
- wireSpacing() - Method in interface nxopen.routing.electrical.CableStockDefinition
-
Returns the separation between wires in a cable.
- WireTool - Interface in nxopen.cam
-
- wireType() - Method in interface nxopen.routing.electrical.ElectricalStockDefinition
-
Returns the wire type of stock
License requirements: routing_advanced ("Routing Advanced"), routing_base ("Routing Basic")
.
- WITH_ADDENDUM - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Part
-
part with addendum
- WITH_COPIES - Static variable in class nxopen.tooling.AssignPatchBuilder.ConvertTypeOption
-
- WITH_CURVE - Static variable in class nxopen.die.AddendumSectionBuilder.SectionLocationType
-
Create section by approximating curves.
- WITH_FILLET - Static variable in class nxopen.features.DraftBodyBuilder.RepairingPartingEdgeOption
-
Repair concave miter corners with fillet
- WITH_INSPECTION - Static variable in class nxopen.uf.UFDrf.InspectionType
-
- WITH_INTERFERENCE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Interfering
-
- WITH_LASER - Static variable in class nxopen.cae.connections.SeamWeldType
-
Seam weld done by laser
- WITH_LEADER - Static variable in class nxopen.uf.UFDrf.LeaderMode
-
- WITH_LEADER_NO_STUB - Static variable in class nxopen.annotations.NarrowDisplayOption
-
Displays narrow dimension with leader, but without stub
- WITH_LINE_AND_FILLET - Static variable in class nxopen.features.DraftBodyBuilder.RepairingPartingEdgeOption
-
Repair concave miter corners with both fillet and line
- WITH_MATERIAL - Static variable in class nxopen.cae.connections.SeamWeldType
-
Seam weld done with material
- WITH_MULTIPLE_SOURCE - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkType
-
Indicate relink browser type is with multuple source
- WITH_PREFIX - Static variable in class nxopen.pdm.PartOperationImportBuilder.ConversionRule
-
- WITH_REFERENCE_SYMBOL - Static variable in class nxopen.uf.UFDrf.ReferenceSymbolType
-
- WITH_REPLACE_STRING - Static variable in class nxopen.pdm.PartOperationImportBuilder.ConversionRule
-
- WITH_ROTOR - Static variable in class nxopen.motion.PMDCMotorBuilder.Type
-
Included rotor - load torque
- WITH_SECTION_VIEW - Static variable in class nxopen.drawings.ViewSectionLineBuilder.ShowSectionLineType
-
- WITH_SUFFIX - Static variable in class nxopen.pdm.PartOperationImportBuilder.ConversionRule
-
- WITH_VIEW - Static variable in class nxopen.drawings.SectionLineStyleBuilder.CreateSectionLineType
-
Deprecated.
- WITHDRAW - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Withdraw
- WITHDRAW_BY_DISTANCE - Static variable in class nxopen.cam.TurnEngageRetractBuilder.AutoOptions
-
Withdraw by Distance
- WITHIN_CUT_AREA - Static variable in class nxopen.cam.CutParametersCornerFindingTypes
-
Within Cut Area
- WITHIN_DISTANCE - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CustomMemberDataTypes
-
Within Distance
- WITHIN_MODELING - Static variable in class nxopen.SmartObject.UpdateOption
-
Updates within modeling (e.g. a feature).
- WITHIN_PATTERN_DEFINITION_CIRCULAR - Static variable in class nxopen.geometricutilities.PatternClocking.ClockingType
-
Deprecated.
- WITHIN_PATTERN_DEFINITION_CIRCULAR - Static variable in class nxopen.geometricutilities.PatternClockingBuilder.ClockingType
-
- WITHIN_PATTERN_DEFINITION_LINEAR - Static variable in class nxopen.geometricutilities.PatternClocking.ClockingType
-
Deprecated.
- WITHIN_PATTERN_DEFINITION_LINEAR - Static variable in class nxopen.geometricutilities.PatternClockingBuilder.ClockingType
-
- WITHIN_REGION - Static variable in class nxopen.cam.RoughFinishTurningBuilder.CustomMemberDataTypes
-
Within Region
- WITHIN_SECTION - Static variable in class nxopen.features.AOCSBuilder.Extend
-
allow extension
- WITHIN_SECTION - Static variable in class nxopen.features.AOCSBuilder.Trim
-
allow trimming
- WITHIN_SECTION - Static variable in class nxopen.tooling.ReusePositioningObjectBuilder.CurveTrim
-
allow trimming
- withLODS - Variable in class nxopen.facet.FacetingParameters
-
When creating a JT facet body whether to create LODs or not
(this does not apply to NX).
- withOrientation() - Method in interface nxopen.cae.connections.Sealing
-
Returns the target type
License requirements: None.
- WITHOUT_ADDENDUM - Static variable in class nxopen.bodydes.OnestepUnformBuilder.Part
-
part without addendum
- WITHOUT_INTERFERENCE - Static variable in class nxopen.drawings.CustomViewSettingsBuilder.Interfering
-
- WITHOUT_LEADER - Static variable in class nxopen.uf.UFDrf.LeaderMode
-
- WITHOUT_ROTOR - Static variable in class nxopen.motion.PMDCMotorBuilder.Type
-
Excluded rotor - rotor speed
- WITHOUT_SECTION_VIEW - Static variable in class nxopen.drawings.ViewSectionLineBuilder.ShowSectionLineType
-
- WITHOUT_VIEW - Static variable in class nxopen.drawings.SectionLineStyleBuilder.CreateSectionLineType
-
Deprecated.
- withoutFalseBody() - Method in interface nxopen.tooling.DieInsertBuilder
-
Returns the option of whether to create false body for die or backing insert.
- withoutFalseBody() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the without false body
License requirements: None.
- withoutWorkflow() - Method in interface nxopen.tooling.DieEngDieTipBuilder
-
Returns the without workflow toggle option
License requirements: die_engineering ("DIE ENGINEERING")
.
- withoutWorkflowSheet() - Method in interface nxopen.die.PierceTaskBuilder
-
Returns the without workflow sheet of the pierce task builder.
- withScale() - Method in interface nxopen.blockstyler.AngularDimension
-
Returns the WithScale
License requirements: None.
- withScale() - Method in interface nxopen.blockstyler.ExpressionBlock
-
Returns the WithScale.
- withScale() - Method in interface nxopen.blockstyler.LinearDimension
-
Returns the WithScale.
- withScale() - Method in interface nxopen.blockstyler.OnPathDimension
-
Returns the WithScale.
- withScale() - Method in interface nxopen.blockstyler.RadiusDimension
-
Returns the WithScale
License requirements: None.
- Wizard - Interface in nxopen.blockstyler
-
Represents a Wizard block .
- Wizard.IsStepOkayCallback - Interface in nxopen.blockstyler
-
The IsStepOkay callback allows the client to notify the Wizard that the step is okay
or not.
- Wizard.OnMenuCallback - Interface in nxopen.blockstyler
-
The OnMenu callback notifies a client prior to creating the popup menu in the Task
Navigator.
- Wizard.OnMenuSelectionCallback - Interface in nxopen.blockstyler
-
The OnMenuSelection callback notifies a client of the menu item selection on the popup menu
in the Task Navigator.
- Wizard.OnSubNodeCallback - Interface in nxopen.blockstyler
-
The OnSubNode callback notifies a client of an action performed
on a sub-node in the Wizard Task Navigator.
- Wizard.StepNotifyPostCallback - Interface in nxopen.blockstyler
-
The StepNotifyPost callback notifies a client after navigating to the next step
in the Wizard.
- Wizard.StepNotifyPreCallback - Interface in nxopen.blockstyler
-
The StepNotifyPre callback notifies a client before navigating to the next step
in the Wizard.
- Wizard.SubNodeAction - Class in nxopen.blockstyler
-
Specifies the type of action performed on a sub-node in the Wizard Task Navigator.
- Wizard.TaskNavigatorItem - Class in nxopen.blockstyler
-
Specifies an item in the Task Navigator.
- wizardAskCurrentObject() - Method in interface nxopen.uf.UFCam
-
- wizardSetCurrentObject(Tag) - Method in interface nxopen.uf.UFCam
-
- wizardType() - Method in interface nxopen.tooling.AssemblyDrawingBuilder
-
Returns the wizard type attribute
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.CompDrawingBuilder
-
Returns the wizard type attribute
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.CopySolidBuilder
-
Returns the wizard type data.
- wizardType() - Method in interface nxopen.tooling.FaceColorManagementBuilder
-
Returns the wizard type
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.GeneralInsertBuilder
-
Returns the wizard type
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.HoleDatumSymbolBuilder
-
Returns the wizard type
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.HoleManufacturingNoteBuilder
-
Returns the wizard type
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.ObjectAttributeManagementBuilder
-
Returns the wizard type
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.RenameAndExportComponentBuilder
-
Returns the wizard type
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.ShimBuilder
-
Returns the wizard type
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.SpecialFormingBuilder
-
Returns the wizard type
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.SpecialPiercingInsertBuilder
-
Returns the wizard type
License requirements: None.
- wizardType() - Method in interface nxopen.tooling.SplitInsertBuilder
-
Returns the wizard type
License requirements: None.
- WMF_TO_CLIPBOARD - Static variable in class nxopen.uf.UFDisp.WmfOutput
-
- WMF_TO_FILE - Static variable in class nxopen.uf.UFDisp.WmfOutput
-
- WOOD - Static variable in class nxopen.drawings.BrokenViewBuilder.BreakLineStyle
-
Wood
- WOOD - Static variable in class nxopen.drawings.ViewBreakBuilder.Viewbreaklinestyle
-
- WOOD - Static variable in class nxopen.preferences.PartDrafting.BreakLineStyle
-
Wood
- WOOD_ACROSS_GRAIN - Static variable in class nxopen.annotations.AreaFillMaterial
-
Wood across grain
- WOOD_ACROSS_GRAIN - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
-
- WOOD_ALONG_GRAIN - Static variable in class nxopen.annotations.AreaFillMaterial
-
Wood along grain
- WOOD_ALONG_GRAIN - Static variable in class nxopen.uf.UFDrf.AreaFillMaterial
-
- WOODACROSSGRAIN - Static variable in class nxopen.uf.UFDrf.ValidMaterial
-
- WOODWITHGRAIN - Static variable in class nxopen.uf.UFDrf.ValidMaterial
-
- WORD - Static variable in class nxopen.ame.ConstantType
-
- WORD - Static variable in class nxopen.ame.InterfaceAccessType
-
- WORD - Static variable in class nxopen.ame.PlcDataType
-
- wordWrap() - Method in interface nxopen.blockstyler.Label
-
Returns the WordWrap
License requirements: None.
- WORK - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentLayerOptionType
-
Set the layer option type to work
- WORK - Static variable in class nxopen.assemblies.DesignElementBuilder.LayerOptionType
-
Work layer
- WORK - Static variable in class nxopen.assemblies.ReplaceComponentBuilder.ComponentLayerOption
-
Set the layer to current work layer
- WORK - Static variable in class nxopen.cam.NcmctPartMountingBuilder.LayerTypes
-
Work
- work() - Method in interface nxopen.cam.ObjectWorkInstructionBuilder
-
Returns the work instruction
License requirements: cam_base ("CAM BASE")
.
- WORK - Static variable in class nxopen.display.LayerSettingsBuilder.LayerOptionType
-
Work layer
- WORK - Static variable in class nxopen.DxfdwgImporter.ImportToEnum
-
import dxf/dwg file to work part
- WORK - Static variable in class nxopen.features.MoveObjectBuilder.LayerOptionType
-
Work Layer
- WORK - Static variable in class nxopen.motion.ActiveView
-
Articulation or Spreadsheet Run in work view only
- WORK - Static variable in class nxopen.motion.AddSubmechanismBuilder.Layer
-
the work laye
- WORK - Static variable in class nxopen.PartCleanup.CleanupParts
-
clean up the work part only
- work() - Method in interface nxopen.PartCollection
-
Returns the current work part of the session.
- WORK - Static variable in class nxopen.PartImporter.DestinationCoordinateSystemSpecificationType
-
Use Work Coordinate System.
- WORK - Static variable in class nxopen.PartImporter.LayerOptionType
-
Import part on work layer.
- WORK - Static variable in class nxopen.PasteSpecialBuilder.LayerOption
-
- WORK - Static variable in class nxopen.preferences.SessionAssemblies.PositioningTaskCollectionOptionForDesignElements
-
- WORK - Static variable in class nxopen.tooling.AddReusableFeatureBuilder.LayerOptionType
-
Work Layer
- WORK - Static variable in class nxopen.userdefinedtemplate.InstantiationBuilder.JaUserdefinedtemplateLayerOption
-
Outputs will follow the work parts layer convention
- WORK_CYLINDRICAL - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- WORK_LAYER - Static variable in class nxopen.layer.State
-
Work layer.
- WORK_PART - Static variable in class nxopen.annotations.SearchModelViewBuilder.SearchScopeOptions
-
work part only
- WORK_PART - Static variable in class nxopen.assemblies.RelinkerBuilder.LinkScope
-
Indicate relink scope is work part
- WORK_PART - Static variable in class nxopen.Catiav5Importer.ImportToOption
-
import Catia V5 file to work part
- WORK_PART - Static variable in class nxopen.ExpressionCollection.ExportMode
-
All expressions in the given part
- WORK_PART - Static variable in class nxopen.features.CompositeCurveBuilder.PartType
-
Work part
- WORK_PART - Static variable in class nxopen.features.ExtractFaceBuilder.ParentPartType
-
intra part mode
- WORK_PART - Static variable in class nxopen.features.MirrorBodyBuilder.ParentPart
-
Work Part
- WORK_PART - Static variable in class nxopen.features.shipdesign.ShipFeatureConverter.PartScope
-
convert features in the work part only
- WORK_PART - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibAssemblyOption
-
update the library in the current work part only
- WORK_PART - Static variable in class nxopen.features.vehicledesign.MirrorCertificationBuilder.EyeFromOptionType
-
Represents eyellipse feature is from work part
- WORK_PART - Static variable in class nxopen.features.WaveDatumBuilder.ParentPartType
-
intra part mode
- WORK_PART - Static variable in class nxopen.features.WavePointBuilder.ParentPartType
-
intra part mode
- WORK_PART - Static variable in class nxopen.features.WaveSketchBuilder.ParentPartType
-
intra part mode
- WORK_PART - Static variable in class nxopen.IgesImporter.ImportToEnum
-
import iges file to work part
- WORK_PART - Static variable in class nxopen.ProeImporter.ImportToOption
-
import proe file to work part
- WORK_PART - Static variable in class nxopen.routing.StockPartConverterBuilder.PartOption
-
Upgrades stocks from the work part only
- WORK_PART - Static variable in class nxopen.Selection.SelectionScope
-
Use the work part
- WORK_PART - Static variable in class nxopen.Step203Importer.ImportToOption
-
import iges file to work part
- WORK_PART - Static variable in class nxopen.Step214Importer.ImportToOption
-
import iges file to work part
- WORK_PART - Static variable in class nxopen.Step242Importer.ImportToOption
-
import STEP242 file to work part
- WORK_PART - Static variable in class nxopen.visualreporting.VisualReport.ReportContextOption
-
Collect objects from work part only
- WORK_PART - Static variable in class nxopen.weld.SurfaceWeldBuilder.DestinationTypes
-
- WORK_PART - Static variable in class nxopen.weld.WeldJointBuilder.DestinationTypes
-
Create new joints in work part.
- WORK_PART_ABSOLUTE - Static variable in class nxopen.assemblies.AddComponentBuilder.LocationType
-
Absolute of work part as initial location type
- WORK_PART_AND_COMPONENTS - Static variable in class nxopen.annotations.SearchModelViewBuilder.SearchScopeOptions
-
work part and components
- WORK_PART_AND_OCCURRENCE - Static variable in class nxopen.DisplayManager.ShowHideScope
-
Show and hide objects only from the work part and its children
- WORK_PART_AND_OCCURRENCE - Static variable in class nxopen.Selection.SelectionScope
-
Use the work part or any occurrence
- WORK_PART_ORIGIN - Static variable in class nxopen.OriginMethod
-
Use Work Part Origin
- WORK_PART_WITH_LOADED_CHILDREN - Static variable in class nxopen.routing.StockPartConverterBuilder.PartOption
-
Upgraded stocks from work part as well loaded children parts
- WORK_PARTAND_COMPONENTS - Static variable in class nxopen.features.shipdesign.ShipFeatureConverter.PartScope
-
convert features in wort part and sub-component parts
- WORK_PARTAND_COMPONENTS - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibAssemblyOption
-
update the library in the current work part and all of its components
- WORK_PARTAND_COMPONENTSWITH_LIBRARIES - Static variable in class nxopen.features.shipdesign.UpdateShipLibraryBuilder.ShipLibAssemblyOption
-
update any parts with existing libraries starting in the current work part and all of its components
- WORK_RECTANGULAR - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- WORK_SPHERICAL - Static variable in class nxopen.cae.Result.CoordinateSystem
-
- WORK_VIEW - Static variable in class nxopen.geometricanalysis.CurveAnalysisCombsBuilder.DirectionOptionType
-
Deprecated.
work view
- WORK_VIEW - Static variable in class nxopen.geometricanalysis.CurveAnalysisInflectionsBuilder.DirectionOptionType
-
Deprecated.
work view
- WORK_VIEW - Static variable in class nxopen.geometricanalysis.CurveAnalysisPeaksBuilder.DirectionOptionType
-
Deprecated.
work view
- WORK_VIEW - Static variable in class nxopen.geometricanalysis.CurveAnalysisRecord.DirectionOptionType
-
Deprecated.
work view
- WORK_VIEW - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.MeasurementMethodType
-
Work view
- WORK_VIEW - Static variable in class nxopen.preferences.PartVisualizationNamesBorders.NameDisplay
-
Work View places all names
in the current work view, even
if the existing names had been
defined in different views
- WORK_VIEW_ONLY - Static variable in class nxopen.display.TransientText.ViewType
-
- workAreaLength() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the work area length.
- workAreaWidth() - Method in interface nxopen.tooling.QuickQuotationBuilder
-
Returns the work area width.
- workCollection() - Method in interface nxopen.assemblies.PositioningTaskBuilder
-
Returns the work collection
License requirements: None.
- workComponent() - Method in interface nxopen.PartCollection
-
Returns
the work component.
- workCoordinateSystem() - Method in interface nxopen.weld.ExportWeldJointBuilder
-
Returns the local coordinate system used to calculate the output points on welding joint.
- workDone(double, double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the work done on a system.
- workflow() - Method in interface nxopen.drafting.PreferencesBuilder
-
Returns the general workflow builder
License requirements: None.
- workflow() - Method in interface nxopen.DxfdwgImporter
-
Returns the DXFDWG Import Workflow Option - this will set dxfdwg import workflow to either 3D or Drawing
License requirements: None.
- workflowManagement() - Method in interface nxopen.tooling.ToolingManager
-
Returns the WorkflowManagementCollection instance belonging to this part .
- WorkflowManagementCollection - Interface in nxopen.tooling
-
Creates a Workflow Management Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX8.0.0
- WORKING - Static variable in class nxopen.ame.LoadLineDesignerBuilder.RevisionRuleType
-
- workingPart() - Method in interface nxopen.tooling.EjectorTableBuilder
-
Returns the part where a self contained drawing will be created or the part to be added into the master model drawing part.
- WorkInstructionBuilder - Interface in nxopen.cam
-
- WorkInstructionOutputBuilder - Interface in nxopen.cam
-
Represents the builder for Work Instruction Output.
- WorkInstructionOutputBuilder.OutputFormatType - Class in nxopen.cam
-
the output format type
- WorkInstructionOutputBuilder.PageOrientationType - Class in nxopen.cam
-
the page orientation type
- WorkInstructionOutputBuilder.PageSizeType - Class in nxopen.cam
-
the page size type
- workLayer() - Method in interface nxopen.layer.LayerManager
-
Returns the work layer.
- workModeFrequencies - Variable in class nxopen.cae.CorrelSolution.CalculateComacsData
-
work mode frequencies
- workModeFrequencies - Variable in class nxopen.cae.CorrelSolution.ComputeMacsData
-
work mode frequencies
- workModeNumbers - Variable in class nxopen.cae.CorrelSolution.CalculateComacsData
-
work mode numbers
- workModeNumbers - Variable in class nxopen.cae.CorrelSolution.ComputeMacsData
-
work mode numbers
- workobjects - Variable in class nxopen.pdm.SmartSaveContext.WorkObjectToRootObjectMapData
-
array of work objects to be saved
- WorkObjectToRootObjectMapData() - Constructor for class nxopen.pdm.SmartSaveContext.WorkObjectToRootObjectMapData
-
- workOffset() - Method in interface nxopen.cam.ProbeCalibrateStylusMoveBuilder
-
Returns the work offset to update
License requirements: None.
- workOffset() - Method in interface nxopen.cam.ProbeControlParametersBuilder
-
Returns the work offset to update
License requirements: None.
- workPart() - Method in interface nxopen.tooling.BendOperationBuilder
-
Returns the work part.
- workPart() - Method in interface nxopen.tooling.BlankGeneratorBuilder
-
Returns the work part needed while creating blank.
- workPart() - Method in interface nxopen.tooling.DirectUnbendBuilder
-
Returns the work part.
- workPart() - Method in interface nxopen.weld.WeldJointBuilder
-
Returns the saved work part
License requirements: None.
- workPartChangedHandler(BasePart) - Method in interface nxopen.PartCollection.WorkPartChangedHandler
-
User defined method that is called whenever the work part has changed.
- workPartDisplayAsEntirePart() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the work part display as entire part option
License requirements: None.
- workPartEmphasis() - Method in interface nxopen.preferences.SessionVisualizationEmphasis
-
Returns the setting that controls whether or not the work part is
emphasized.
- workPartEmphasize() - Method in interface nxopen.preferences.SessionAssemblies
-
- workPartMaintain() - Method in interface nxopen.preferences.SessionAssemblies
-
- workPartWarnOnAutomaticChange() - Method in interface nxopen.preferences.SessionAssemblies
-
Returns the warn on automatic change for work part option
License requirements: None.
- WORKPIECE - Static variable in class nxopen.assemblies.CreateNewComponentBuilder.ComponentCamType
-
Set the component type to workpiece
- WORKPIECE - Static variable in class nxopen.cam.FeatureRecognitionBuilder.GeometrySearch
-
Search for features in workpiece
- Workpiece - Interface in nxopen.mfg.mlp
-
Represents a Machining Line Planner workpiece
To obtain an instance of this class, use GetWorkpiece of MachiningFeature or GetWorkpieces of ProcessSetup or Product.
- WORKPIECE - Static variable in class nxopen.sim.KinematicComponentBuilder.SystemClass
-
Workpiece - Setup classification
- workpiece() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
Returns the workpiece part to be checked with the electrode part.
- workpiece() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Returns the utility to get the workpiece to create an electrode design project.
- WORKPIECE_ONLY - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PmiScopeTypes
-
Link PMI will be performed for the workpiece only
- WORKPIECEAND_COMPONENTS - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.PmiScopeTypes
-
Link PMI will be performed for the workpiece and components
- WorkpieceBuilder - Interface in nxopen.tooling
-
- WorkpieceBuilder.MethodType - Class in nxopen.tooling
-
the unit type includes the work piece define method
- WorkpieceBuilder.Types - Class in nxopen.tooling
-
the unit type includes product and combined work piece type
- WorkpieceBuilder.WorkPieceType - Class in nxopen.tooling
-
the unit type includes the work piece create method
- WorkpieceCollection - Interface in nxopen.tooling
-
Creates a Workpiece Collection
To obtain an instance of this class, refer to
ToolingManager
Created in NX6.0.0
- workpieceFace() - Method in interface nxopen.cam.ConvertFromMCDBuilder
-
Returns the workpiece face.
- workpieceList() - Method in interface nxopen.tooling.ElectrodeInitializationBuilder
-
Returns the utility to get the workpiece list to create an electrode design project.
- workpieceNameFilter() - Method in interface nxopen.tooling.ElectrodeCheckingBuilder
-
Returns the wildcard string to filter out the workpiece part name.
- workpieces() - Method in interface nxopen.tooling.ToolingManager
-
Returns the WorkpieceCollection instance belonging to this part .
- workpieceString() - Method in interface nxopen.cam.InspectionLinkPmiBuilder
-
Returns the name of the workpiece to be processed by Link PMI
License requirements: None.
- workplane() - Method in interface nxopen.preferences.PartPreferences
-
Returns the workplane preferences.
- workPlane() - Method in interface nxopen.preferences.SessionPreferences
-
Returns object for doing WorkPlane preferences settings applicable to entire session .
- WorkPlane - Interface in nxopen.preferences
-
Represents the set of WorkPlanePreferences preferences applicable to part.
- WorkPlane.Grid - Class in nxopen.preferences
-
Describes whether the Grid type selected is Polar or Rectangular
- WorkPlane.GridSize - Class in nxopen.preferences
-
Grid size parameters
- WorkPlane.NonuniformGridSize - Class in nxopen.preferences
-
Nonuniform grid size parameters
- WorkPlane.PolarGridSize - Class in nxopen.preferences
-
Polar grid size parameters
- workPositionAngle() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the working position angle
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- workPositionAngleType() - Method in interface nxopen.sim.KinematicComponentBuilder
-
Returns the working position angle type
License requirements: ug_isv_full ("Full functionality for Integrated Simulation and Verification") OR nx_isv_mtb ("Machine Tool Builder")
.
- workRegionDefinitionMethod() - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder
-
Returns the work region definition method
License requirements: None.
- workRegionObjects() - Method in interface nxopen.features.subdivision.DefineWorkRegionBuilder
-
Returns the work region objects
License requirements: None.
- WORKSET - Static variable in class nxopen.assemblies.CollaborativeContentType
-
Workset
- workset() - Method in interface nxopen.assemblies.SubsetBuilder
-
- WORKSET - Static variable in class nxopen.BasePart.CollaborativeContentType
-
Workset
- WORKSET - Static variable in class nxopen.FileNewTemplateType
-
Specifies a file new workset template
- WORKSET - Static variable in class nxopen.issue.IssueAttachment.Type
-
Workset type
- workSolution() - Method in interface nxopen.cae.CorrelSolutionBuilder
-
Returns the work (analysis) solution of correlation
License requirements: None.
- WORKSPACE - Static variable in class nxopen.cam.BoundaryTurnBlank.Type
-
- workView() - Method in interface nxopen.geometricutilities.SupportPlaneData
-
- workView() - Method in interface nxopen.Layout
-
Returns the work view of the layout.
- workView() - Method in interface nxopen.ModelingViewCollection
-
Returns the work view of the part.
- workView() - Method in interface nxopen.ViewCollection
-
Returns the work view of the part, which is the work view of the
current layout of the part.
- WORST_PRINCIPAL - Static variable in class nxopen.cae.Result.Component
-
- worstTestValue - Variable in class nxopen.cae.modelcheck.ElementQualityCheckResults.TestSummary
-
the worst test value of the specified test within all checked elements.
- WOVEN - Static variable in class nxopen.cae.LaminateDrapingDataBuilder.SolverType
-
woven solver
- WRAP - Static variable in class nxopen.annotations.TableCellStyleBuilder.FitMethodType
-
- WRAP - Static variable in class nxopen.diagramming.tables.OverflowBehavior
-
Wrap overflow behavior
- WRAP - Static variable in class nxopen.features.WrapBuilder.Types
-
Curves are to be wrapped from a plane onto the selected faces,
during edit you can get this value but any change will be ignored.
- WRAP - Static variable in class nxopen.uf.UFCurve.WrapType
-
- WRAP_AROUND - Static variable in class nxopen.features.vehicledesign.HeadImpactAPillarDetailBuilder.MeasurementMethodType
-
- WrapApplicationType - Class in nxopen.routing
-
Available application methods for wrapped overstock
- WrapAssem() - Constructor for class nxopen.uf.UFModl.WrapAssem
-
- WrapAssem(int, double, String, String, int, Tag[], Tag[], int, Tag[], Tag[]) - Constructor for class nxopen.uf.UFModl.WrapAssem
-
- WrapBuilder - Interface in nxopen.features
-
- WrapBuilder.Types - Class in nxopen.features
-
Settings for the type of wrap operation being performed.
- wrapCurveObject - Variable in class nxopen.uf.UFCurve.AskWrapCurveParentsData
-
- WrapData() - Constructor for class nxopen.uf.UFCurve.WrapData
-
- WrapData(UFCurve.WrapType, int, Tag[], Tag, int, Tag[], String, double, double) - Constructor for class nxopen.uf.UFCurve.WrapData
-
- wrapFaces - Variable in class nxopen.uf.UFCurve.WrapData
-
- WrapGeom() - Constructor for class nxopen.uf.UFModl.WrapGeom
-
- WrapGeom(int, double, String, String, int, Tag[], int, Tag[]) - Constructor for class nxopen.uf.UFModl.WrapGeom
-
- WrapGeometry - Interface in nxopen.features
-
Represents a wrap geometry feature
To create or edit an instance of this class, use
WrapGeometryBuilder
Created in NX6.0.0
- WrapGeometryBuilder - Interface in nxopen.features
-
- WrapGeometryBuilder.CloseGapType - Class in nxopen.features
-
Represents the close gap type
- wrapMethod() - Method in interface nxopen.mechanicalrouting.InsulationBuilder
-
- wrapMethod() - Method in interface nxopen.routing.OverstockBuilder
-
- WRAPPED - Static variable in class nxopen.routing.StockType
-
Wrapped, e.g., electrical tape
- WRAPPED - Static variable in class nxopen.routing.Type
-
- wrappedOverstockLengthCalculationPlugin(Overstock) - Method in interface nxopen.routing.CustomManager.WrappedOverstockLengthCalculationPlugin
-
This defines the prototype for the wrapped overstock length calculation plugin.
- wrapPlane - Variable in class nxopen.uf.UFCurve.WrapData
-
- wrapSpin() - Method in interface nxopen.blockstyler.DoubleBlock
-
Returns the WrapSpin
License requirements: None.
- wrapSpin() - Method in interface nxopen.blockstyler.DoubleTable
-
Returns the WrapSpin.
- wrapSpin() - Method in interface nxopen.blockstyler.IntegerBlock
-
Returns the WrapSpin
License requirements: None.
- wrapSpin() - Method in interface nxopen.blockstyler.IntegerTable
-
Returns the WrapSpin.
- WrapUnwrap - Interface in nxopen.features
-
Represents a wrap or unwrap curve feature
To create or edit an instance of this class, use
WrapBuilder
Created in NX6.0.0
- wrapUnwrapSw - Variable in class nxopen.uf.UFCurve.WrapData
-
- wrapUp() - Method in interface nxopen.cae.SimConditionSeqMgr
-
- wrenchSize() - Method in interface nxopen.cam.LaserCutoutDefinition
-
Returns the Wrench Size
License requirements: None.
- write(String) - Method in interface nxopen.LogFile
-
Write a string to the system log file
License requirements: None.
- WRITE - Static variable in class nxopen.mechatronics.SHMSignalConnectionBuilder.SHMSignalAccessType
-
write
- WRITE - Static variable in class nxopen.SpreadsheetManager.OpenMode
-
write mode
- WRITE_EDIT_AND_SOLVE_INPUT_FILE - Static variable in class nxopen.cae.SimSolution.SolveOption
-
write solver input file, allow edit and then launch solve
- WRITE_ONLY - Static variable in class nxopen.mechatronics.OPCClientBuilder.TagAccess
-
write only
- WRITE_SOLVER_INPUT_FILE - Static variable in class nxopen.cae.SimSolution.SolveOption
-
write solver input file only
- WRITE_TO_FILE_FAILED - Static variable in class nxopen.uf.UFConstants
-
- writeAssemblyDefinition(String) - Method in interface nxopen.cae.connections.Composer
-
WriteAssemblyFromExcel
License requirements: nx_masterfem ("Finite Element Modeling")
.
- writeCustomColorsToCdf(String, UFCgm.CustomColors) - Method in interface nxopen.uf.UFPlot
-
- writeCustomWidthsToWdf(String, UFCgm.CustomWidths) - Method in interface nxopen.uf.UFPlot
-
- writeDfaFile(String, String, boolean) - Method in interface nxopen.RuleManager
-
Write a string out to a dfa file.
- writeFullline(String) - Method in interface nxopen.ListingWindow
-
Writes a full line to the listing window.
- writeImageToClipBoard(int, int, boolean) - Method in interface nxopen.cae.xyplot.XYPlotManager
-
Write the image of current plot on a view to Windows's ClipBoard
License requirements: None.
- writeInputFile() - Method in interface nxopen.cae.LaminateDynamicEvent
-
Write the solver input xml file.
- writeLine(String) - Method in interface nxopen.ListingWindow
-
Writes a line to the listing window.
- writeLine(String) - Method in interface nxopen.LogFile
-
Write a string with a following new line to the system log file
License requirements: None.
- writeListingWindow(String) - Method in interface nxopen.uf.UFUi
-
- writeObjectInfo(int, Tag[], String) - Method in interface nxopen.uf.UFMotion
-
- WRITER - Static variable in class nxopen.mechatronics.ReadWriteDeviceBuilder.DeviceType
-
Writer
- writeRange(SpreadsheetCellData[]) - Method in interface nxopen.SpreadsheetExternal
-
Writes the data to the specified range of the spreadsheet.
- writeReport() - Method in interface nxopen.uf.UFSf
-
- writeSolidAs() - Method in interface nxopen.Catiav4Creator
-
Returns the write solid as - this will decide if solids should be written as SOLIDE or Volumes
License requirements: None.
- writeTabnotCell(Tag, int, int, UFDraw.TabnotCellParams) - Method in interface nxopen.uf.UFDraw
-
- writeTabnotColWdt(Tag, int, double) - Method in interface nxopen.uf.UFDraw
-
- writeTabnotRowHgt(Tag, int, double) - Method in interface nxopen.uf.UFDraw
-
- writeToFile(String) - Method in interface nxopen.uf.UFWeb
-
- writeToJournal(String) - Method in interface nxopen.uf.UFPs
-
- writeToTemplateFile(String) - Method in interface nxopen.cae.xyplot.Plot
-
Writes the template setting of plot to template file.
- wrkPt1() - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
Returns the working common origin point
License requirements: None.
- wrkPt2() - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
Returns the working first axis origin point
License requirements: None.
- wrkPt3() - Method in interface nxopen.cae.CorrelAlignmentBuilder
-
Returns the working second axis point
License requirements: None.
- WRONG_ENLARGE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- WRONG_FACE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- WRONG_FEATURE_TYPE - Static variable in class nxopen.uf.UFConstants
-
- WRONG_SWEEP_TYPE - Static variable in class nxopen.uf.UFConstants
-
- wscale() - Method in interface nxopen.geometricutilities.FrameOnPathBuilder
-
Returns the width scale
License requirements: None.
- wscale() - Method in interface nxopen.geometricutilities.RectangularFrameBuilder
-
Returns the width scale
License requirements: None.
- WSTRING - Static variable in class nxopen.ame.PlcDataType
-
- wxExpression() - Method in interface nxopen.motion.LinkInitialVelocity
-
Returns the component of rotation about X axis.
- wyExpression() - Method in interface nxopen.motion.LinkInitialVelocity
-
Returns the component of rotation about Y axis.
- wzExpression() - Method in interface nxopen.motion.LinkInitialVelocity
-
Returns the component of rotation about Z axis.