- Y - Static variable in class nxopen.annotations.BaseFrameBarBuilder.AxisType
-
Ship Y Axis
- Y - Static variable in class nxopen.cae.CaeElementAssociatedDataUtilsComponentEnd
-
Y translational
- Y - Static variable in class nxopen.cae.connections.Dof
-
Y Translation degree of freedom
- y - Variable in class nxopen.cae.CorrelAlignmentBuilder.ReferencePt
-
- Y - Static variable in class nxopen.cae.DamperEADBuilder.TranslationalComponentEnd
-
Y translational
- Y - Static variable in class nxopen.cae.FrfSet.NodeComponent
-
y component
- Y - Static variable in class nxopen.cae.LaminateDynamicEventBuilder.ExcitationSelectedAxisEnum
-
- Y - Static variable in class nxopen.cae.LaminateRandomEventBuilder.ExcitationAxisEnum
-
Deprecated.
- y() - Method in interface nxopen.cae.NodeCreateBuilder
-
Returns the y
License requirements: None.
- y() - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
Returns the y
License requirements: None.
- Y - Static variable in class nxopen.cae.optimization.TBSTopologyLinkCondition.AxisType
-
Represents Y axis
- Y - Static variable in class nxopen.cae.Post.AxisymetricAxis
-
- Y - Static variable in class nxopen.cae.Post.ClipPlane
-
- Y - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
Y component of a 3D vector
- Y - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- Y - Static variable in class nxopen.cae.responsesimulation.Excitation.Component
-
- Y - Static variable in class nxopen.cae.responsesimulation.TranslationalNodalFunctionExcitationBuilder.RotationAxisType
-
- Y - Static variable in class nxopen.cae.Result.Component
-
- Y - Static variable in class nxopen.cae.SpringEADBuilder.TranslationalComponentEnd
-
Y translational
- Y - Static variable in class nxopen.cae.xyplot.AxisDirection
-
Y-axis
- y() - Method in interface nxopen.cam.InspectionLineFeatureBuilder
-
Returns the Y coordinate of one end of a bounded line or any point on an unbounded line
License requirements: None.
- y() - Method in interface nxopen.cam.InspectionMeasurePointBuilder
-
Returns the Y at measured point
License requirements: None.
- Y - Static variable in class nxopen.cam.RotaryPolarMoveBuilder.LockAxisDirection
-
Y-Axis
- Y - Static variable in class nxopen.diagramming.Axis
-
Y axis
- y() - Method in interface nxopen.diagramming.SheetElementBuilder
-
Returns the absolute y coordinate.
- Y - Static variable in class nxopen.display.DynamicSectionTypes.Axis
-
Y axis
- Y - Static variable in class nxopen.features.DatumAxisBuilder.FixedType
-
Fixed datum axis thru Y Axis
- Y - Static variable in class nxopen.features.EdgeSymmetryBuilder.MovementDirections
-
Along YC direction
- Y - Static variable in class nxopen.features.MatchEdgeBuilder.PoleMoveDirection
-
Along YC direction
- Y - Static variable in class nxopen.features.NSidedSurfaceBuilder.CenterControlAxisType
-
y axis
- Y - Static variable in class nxopen.features.PolylineBuilder.WCSOptionType
-
Along Y axis
- Y - Static variable in class nxopen.features.shipdesign.SectionViewBuilder.PlaneTypes
-
- Y - Static variable in class nxopen.features.StudioSplineBuilderEx.WCSOptionType
-
Along Y axis
- Y - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Translate in Y direction
- Y - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalRotatingAxisType
-
Rotate in Y direction
- Y - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalScalingDirectionType
-
Scale in Y direction
- Y - Static variable in class nxopen.features.subdivision.TransformCageData.WCSOptionType
-
Along Y axis
- Y - Static variable in class nxopen.fields.DisplayPropertiesBuilder.Legacy3DType
-
- Y - Static variable in class nxopen.fields.DisplayPropertiesBuilder.VectorType
-
- Y - Static variable in class nxopen.geometricanalysis.CurveCurvatureAnalysisBuilder.XyzTypes
-
y-axis plane
- Y - Static variable in class nxopen.geometricanalysis.DeviationGaugeBuilder.XyzDirectionType
-
Y direction
- Y - Static variable in class nxopen.geometricanalysis.SurfaceIntersectionBuilder.XyzTypes
-
y-axis plane
- Y - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.WCSOptionType
-
Along Y axis
- Y - Static variable in class nxopen.geometricutilities.MovePoleBuilder.WCSDirectionType
-
- Y - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Axis
-
Active axis in y-axis direction
- Y - Static variable in class nxopen.geometricutilities.PointSetAlignmentBuilder.ConstraintOptions
-
Y axis
- Y - Static variable in class nxopen.motion.BeamForceBuilder.VectorTypes
-
Y Vector
- Y - Static variable in class nxopen.motion.ControlInputPortBuilder.MeasuredComponent
-
Y
- Y - Static variable in class nxopen.motion.ControlOutputBuilder.DirectionType
-
Output Variable Direction Y
- Y - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices
-
Deprecated.
Y
- Y - Static variable in class nxopen.motion.MotionSensorBuilder.Component
-
y component
- Y - Static variable in class nxopen.motion.ScalarForceBuilder.DirectionType
-
for Y dircetion
- Y - Static variable in class nxopen.motion.ScalarTorqueBuilder.DirectionType
-
Direction Y
- Y - Static variable in class nxopen.motion.SplineBeamBuilder.SectionAxisType
-
Y Vector
- y - Variable in class nxopen.Point2d
-
- y - Variable in class nxopen.Point3d
-
- y - Variable in class nxopen.Point4d
-
- y - Variable in class nxopen.routing.BendReportManager.Mil98Report
-
The Y value from the YBC format.
- y - Variable in class nxopen.routing.BendReportManager.YbcReport
-
The length along the stock before the bend.
- y() - Method in interface nxopen.sim.KinematicChain
-
Returns the Y axis of the kinematic chain
License requirements: None.
- Y - Static variable in class nxopen.tooling.IntermediateStageBuilder.Orientations
-
orientation Y
- Y - Static variable in class nxopen.tooling.QuickDatumCsysBuilder.AlignVectors
-
A list includes Y vector
- y - Variable in class nxopen.uf.UFUi.GetDa1CoordsData
-
- y - Variable in class nxopen.uf.UFUi.GetDa2CoordsData
-
- y - Variable in class nxopen.Vector3d
-
- Y - Static variable in class nxopen.weld.JointmarkBuilder.ProjectionDirectionOptions
-
- Y - Static variable in class nxopen.weld.WeldDatumControlDirection
-
Y direction
- YACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- YANGULAR_ACCELERATION - Static variable in class nxopen.cae.Result.Quantity
-
- YANGULAR_VELOCITY - Static variable in class nxopen.cae.Result.Quantity
-
- YAW_PITCH_ROLL - Static variable in class nxopen.mechatronics.InclinometerBuilder.OutputAngleType
-
yaw/pitch/roll
- yaxis() - Method in interface nxopen.blockstyler.SpecifyOrientation
-
Returns the YAxis
License requirements: None.
- YAXIS - Static variable in class nxopen.cae.AxiSymmetricParameters.AxisOfRotation
-
- YAXIS - Static variable in class nxopen.cae.xyplot.ModelType
-
- yaxis() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the Y position
License requirements: None.
- yaxis() - Method in interface nxopen.cam.AlongMcsAxisMoveBuilder
-
Returns the delta y
License requirements: None.
- YAXIS - Static variable in class nxopen.cam.InspectionAlignmentBuilder.RotationAxisOptions
-
Rotate about Y axis
- YAXIS - Static variable in class nxopen.cam.InspectionToleranceOperationBuilder.ParamXYZAxis
-
Y Axis
- yAxis - Variable in class nxopen.features.BlockFeatureBuilder.OrientationData
-
- yaxis() - Method in interface nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder
-
Returns the plane Y axis
License requirements: None.
- yaxis() - Method in interface nxopen.geometricutilities.AnchorLocatorBuilder
-
Returns the y-axis of the plane
License requirements: None.
- YAXIS - Static variable in class nxopen.uf.UFCurve.PrincipalAxis
-
- yAxis - Variable in class nxopen.uf.UFEval.Arc
-
- yAxis - Variable in class nxopen.uf.UFEval.Ellipse
-
- yAxis - Variable in class nxopen.uf.UFEval.Hyperbola
-
- yAxis - Variable in class nxopen.uf.UFEval.Parabola
-
- YAXIS - Static variable in class nxopen.uf.UFPath.Axis
-
- YAXIS - Static variable in class nxopen.WCS.Axis
-
- YAXIS - Static variable in class nxopen.XYZAxis
-
Y axis
- YAXIS_LABEL - Static variable in class nxopen.cae.xyplot.ModelType
-
- YAXIS_NUMBER - Static variable in class nxopen.cae.xyplot.ModelType
-
- YbcReport() - Constructor for class nxopen.routing.BendReportManager.YbcReport
-
- YbcReport(double, double, double, double) - Constructor for class nxopen.routing.BendReportManager.YbcReport
-
Constructor for the YbcReport object.
- YC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.AngleVector
-
- YC - Static variable in class nxopen.cae.CorrelFineTuneAlignmentBuilder.DistanceVector
-
- YC - Static variable in class nxopen.features.FitCurveBuilder.ProjectionDirectionOptions
-
WCS Y axis
- YC - Static variable in class nxopen.features.SectionInertiaAnalysisBuilder.SectionAxisNormal
-
Along Y Axis
- YC - Static variable in class nxopen.features.StudioXformBuilder.RotationDirectionType
-
Deprecated.
Rotate in Y direction
- YC - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale in Y direction
- YC - Static variable in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Translate in Y direction
- YC - Static variable in class nxopen.geometricanalysis.sectionanalysis.RadialBuilder.RotationAxisType
-
YC axis
- YC - Static variable in class nxopen.geometricanalysis.sectionanalysis.SectionPlaneBuilder.PlaneType
-
YC plane
- yc - Variable in class nxopen.routing.BendReportManager.XyzReport
-
- YC - Static variable in class nxopen.weld.WeldFillBuilder.WidthAlongType
-
The length is aligned along the current WCS Y direction.
- YC_AXIS - Static variable in class nxopen.features.DatumAxisBuilder.Types
-
Datum axis thru Y axis
- YC_AXIS - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
- YC_ZC - Static variable in class nxopen.features.GeneralConicBuilder.DrawingPlaneOptions
-
Use YC-ZC plane
- YC_ZC - Static variable in class nxopen.features.StudioXformBuilder.PlanarizePlaneOptionType
-
Deprecated.
On Y-Z plane when planarize
- YC_ZC - Static variable in class nxopen.features.StudioXformBuilder.ScalingDirectionType
-
Deprecated.
Scale on Y-Z plane
- YC_ZC - Static variable in class nxopen.features.StudioXformBuilder.TranslationDirectionType
-
Deprecated.
Translate on Y-Z plane
- YC_ZC_PLANE - Static variable in class nxopen.features.subdivision.SubdivisionProjectCageBuilder.TargetTypes
-
- ycGridSize - Variable in class nxopen.preferences.WorkPlane.NonuniformGridSize
-
YC axis grid parameters
- ycMapping() - Method in interface nxopen.cam.TurnOrientWcs
-
Returns the YC mapping
License requirements: None.
- ycoefficientsType() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
Returns the yCoefficientsType type will be constant or spline
License requirements: None.
- YCOMPONENT - Static variable in class nxopen.uf.UFMotion.VectorComponent
-
- ycoordinate() - Method in interface nxopen.drafting.MoveToDrawingViewBuilder
-
Returns the y coordinate to calculate the new created drawing view's reference point
License requirements: None.
- ycoordinate() - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder
-
- ycoordinate() - Method in interface nxopen.weld.DatumSurfaceBuilder
-
Returns the y coordinate position for the surface datum location
License requirements: None.
- ycoordinateExp() - Method in interface nxopen.drawings.ViewCenterCoordinateBuilder
-
Returns the expression for the Y coordinate
License requirements: None.
- yCoordinateImag - Variable in class nxopen.cae.ftk.ArrayRecord2D.ComplexData
-
Imaginary part of Y-Coordinate data
- yCoordinateImag - Variable in class nxopen.cae.ftk.ArrayRecord2DEven.EvenComplexData
-
Imaginary part of Y-Coordinate data
- ycoordinateimag - Variable in class nxopen.cae.ftk.ComplexSectionBasedMatrixRecord.SectionData
-
Imaginary part of Y-Coordinate data
- yCoordinatePoints - Variable in class nxopen.cae.ftk.ArrayRecord2D.RealData
-
Y-Coordinate data
- yCoordinatePoints - Variable in class nxopen.cae.ftk.ArrayRecord2DEven.EvenRealData
-
Y-Coordinate data
- ycoordinatepoints - Variable in class nxopen.cae.ftk.RealSectionBasedMatrixRecord.SectionData
-
Y-Coordinate data
- yCoordinateReal - Variable in class nxopen.cae.ftk.ArrayRecord2D.ComplexData
-
Real part of Y-Coordinate data
- yCoordinateReal - Variable in class nxopen.cae.ftk.ArrayRecord2DEven.EvenComplexData
-
Real part of Y-Coordinate data
- ycoordinatereal - Variable in class nxopen.cae.ftk.ComplexSectionBasedMatrixRecord.SectionData
-
Real part of Y-Coordinate data
- ycoordinateUnit() - Method in interface nxopen.cae.ftk.SectionBasedMatrixRecord
-
Returns the Y-Coordinate unit
License requirements: None.
- ycount() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the y count of pressure systems.
- ycount() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the count of rectangular pattern along Y direction, don't use it until nx502
License requirements: None.
- ycount() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Returns the expression containing the attached part count in y direction.
- ycurve() - Method in interface nxopen.motion.RoadBuilder
-
Returns the y spline curve for the road object of path type
License requirements: mechanisms ("MECHANISMS")
.
- ycurve() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the y spline curve of a user defined segment
License requirements: mechanisms ("MECHANISMS")
.
- ycurveProfile() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
Returns the component y curve profile.
- ycurveProfile() - Method in interface nxopen.motion.RoadBuilder
-
Returns the y spline curve defined by a profile for the road object of path type
License requirements: mechanisms ("MECHANISMS")
.
- ycurveProfile() - Method in interface nxopen.motion.SegmentBuilder
-
Returns the y spline curve defined by a profile for the user defined road segment object
License requirements: mechanisms ("MECHANISMS")
.
- YCZCPLANE - Static variable in class nxopen.features.shipdesign.InverseBendingLinesBuilder.ReferencePlaneType
-
YC-ZC plane.
- ydatumFilter() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the y datum filter
License requirements: None.
- yDenominatorUnit - Variable in class nxopen.cae.AfuData.AbscissaAndOrdinateAxisDefinitionData
-
Unit Code of ordinate data
- yDenominatorUnit - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData
-
Ordinate Denominator Unit Code of AFU data
- ydimension() - Method in interface nxopen.CGMBuilder
-
Returns the y dimension to be used when Dimension has been selected from the Size option.
- ydimension() - Method in interface nxopen.PrintPDFBuilder
-
Returns the y dimension to be used when Dimension has been selected from the Size option.
- ydimension() - Method in interface nxopen.tooling.MoldFeatureRecognitionBuilder
-
Returns the y dimension of product body
License requirements: None.
- ydimension() - Method in interface nxopen.tooling.SheetMetalFeatureRecognitionBuilder
-
Returns the y dimension of product body
License requirements: None.
- YDIR - Static variable in class nxopen.tooldesigner.SelectDatumsBuilder.ConesDir
-
- yDir - Variable in class nxopen.uf.UFSf.OrientationData
-
- yDirection - Variable in class nxopen.Conic.OrientationData
-
- yDirection - Variable in class nxopen.CoordinateSystem.DirectionsData
-
- ydirection - Variable in class nxopen.drawings.FlatPatternObject.DirectionsData
-
Y direction of simulated CSYS
- ydirection() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the Y-frame direction.
- ydirection() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the y axis, which can be any vector not parallel to the x axis
License requirements: None.
- ydirection() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the y axis, which can be any vector not parallel to the x axis
License requirements: None.
- YDIRECTION_ONLY - Static variable in class nxopen.features.shipdesign.ShellTemplateBuilder.MarkingTypes
-
Draw Y direction template marking lines on plate.
- ydirectionOption() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the y direction options
License requirements: None.
- YDISPLACEMENT - Static variable in class nxopen.cae.Result.Quantity
-
- ydisplay() - Method in interface nxopen.PlotBuilder
-
Returns the Y coordinate of a banner.
- ydistance() - Method in interface nxopen.cae.ElementTranslateBuilder
-
Returns the y component of distance for translation in a cartesian coordinate system
License requirements: None.
- ydistance() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the y distance
License requirements: None.
- ydistance() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the y distance of pressure systems.
- ydistance() - Method in interface nxopen.die.RibParentBuilder
-
Returns the y distance of die ribs.
- ydistance() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the distance between rectangular pattern along Y direction, don't use it until nx502
License requirements: None.
- ydistance() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the distance along Y-direction.
- ydistanceBuilder() - Method in interface nxopen.cam.MachineHeadGroupBuilder
-
Returns the y distance
License requirements: cam_base ("CAM BASE")
.
- ydistanceFirst() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the first distance along Y value.
- ydistanceSecond() - Method in interface nxopen.tooling.DieBaseBuilder
-
Returns the second distance along Y value.
- year() - Method in interface nxopen.DateItemBuilder
-
Returns the year.
- year - Variable in class nxopen.uf.UFPs.KernelVersion
-
- YEAR - Static variable in class nxopen.visualreporting.Classifier.DateGroupMethodOption
-
The date grouping by year will be used
- yEccentric - Variable in class nxopen.cae.BeamSectionOffsetOptions.Offset
-
- yEccentricity - Variable in class nxopen.cae.BeamSection.Properties
-
Offset measured from centroid to shear center in y-axis
- YELEMENT_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- YELLOW_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- YELLOW_YELLOW_ORANGE_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- YELLOW_YELLOW_SPRING_NAME - Static variable in class nxopen.uf.UFDisp.ColorName
-
- yellowPoint() - Method in interface nxopen.cae.LaminateFiberOrientationOptionsBuilder
-
Returns the yellow point
License requirements: nx_lam_comp_adv ("Laminate Composites Advanced")
.
- YEOH - Static variable in class nxopen.PhysicalMaterial.Type
-
Yeoh
- YEOHTESTDATA - Static variable in class nxopen.PhysicalMaterial.Type
-
Yeoh - test data option
- YES - Static variable in class nxopen.annotations.OrdinateDoglegCreationOption
-
Dogleg will always be created
- YES - Static variable in class nxopen.annotations.SearchCriteriaDatumTargetBuilder.DatumTargetMovableOptions
-
Movable Datum Target
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CircleUOptions
-
have circle U
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.CollectionPlaneOptions
-
have collection plane indicator
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.DirectionFeatureOptions
-
have direction feature indicator
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.FreeStateOptions
-
have free state
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.IndicatorOptions
-
have indicator
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.IntersectionPlaneOptions
-
have intersection plane indicator
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.OrientationPlaneOptions
-
have orientation plane indicator
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.ProjectedOptions
-
have projected
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.StatisticalOptions
-
have statistical
- YES - Static variable in class nxopen.annotations.SearchCriteriaFeatureControlFrameBuilder.TangentPlaneOptions
-
have tangent plane
- YES - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.HiddenOptions
-
Hide the objects
- YES - Static variable in class nxopen.assemblies.AssembliesGeneralPropertiesBuilder.ReferenceComponentOptions
-
Objects will be reference-only components
- YES - Static variable in class nxopen.cam.CAMSetup.PostprocessSettingsOutputWarning
-
output the warning file
- YES - Static variable in class nxopen.cam.Inheritance
-
parameter inherited
- YES - Static variable in class nxopen.cam.InspectionLinkPmiBuilder.CreatePathsOptions
-
Paths will be created by Link PMI
- YES - Static variable in class nxopen.cam.MachineGroupBuilder.RetrieveToolPocketInformation
-
retrieve tool pocket information
- YES - Static variable in class nxopen.cam.NcmWedmBuilder.LeadOutSameAsLeadInTypes
-
the same as lead in
- YES - Static variable in class nxopen.cam.SimulationOptionsBuilder.Enable
-
yes
- YES - Static variable in class nxopen.drawings.DrawingsPropertiesBuilder.SecondaryComponentOptions
-
Marked as secondary geometry
- YES - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.ATLType
-
show ATL area
- YES - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.LowerAreaType
-
show lower area
- YES - Static variable in class nxopen.features.vehicledesign.SeatBeltAnchorageBuilder.UpperAreaType
-
show upper area
- YES - Static variable in class nxopen.MassPropertiesBuilder.UpdateOptions
-
The Update on Save property will be turned on for all selected objects.
- YES - Static variable in class nxopen.preferences.HiddenLineInterferingSolidsOption
-
Yes
- YES - Static variable in class nxopen.preferences.IncludeModelCurvesOption
-
Process model curves for hidden line procesing
- YES - Static variable in class nxopen.preferences.SessionModeling.DeleteChildFeaturesOptionType
-
Delete child features including recipe curves, of a feature being deleted
- YES - Static variable in class nxopen.routing.DesignRuleViolationViewer.OverrideOption
-
this shows that current violation is overridden violations
- YES - Static variable in class nxopen.routing.Port.CreateRotationVector
-
Create the rotation vector on the port created from a coordinate system.
- YES - Static variable in class nxopen.ViewDependentDisplayManager.PartialShading
-
- YES - Static variable in class nxopen.ViewDependentDisplayManager.Translucency
-
- yexpression() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
- yexpression() - Method in interface nxopen.motion.VObject
-
Returns the y component expression
License requirements: None.
- yflip() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the YSelection flip attribute.
- YFrameBuilder - Interface in nxopen.features.shipdesign
-
- yframeEnum() - Method in interface nxopen.features.shipdesign.ShipIntersectionsBuilder
-
Returns the output option for the Longitudinal Y Frames
License requirements: None.
- yframeOption() - Method in interface nxopen.features.shipdesign.ShipCoordinatesBuilder
-
Returns the Y-frame option.
- yfunction() - Method in interface nxopen.motion.BushingGeneralCoefficientsComponent
-
- yfunction() - Method in interface nxopen.motion.VObject
-
Returns the y component function
License requirements: None.
- YIELD_SAFETY - Static variable in class nxopen.cae.responsesimulation.StrengthStressMaterialDefinitionMethod
-
- YIELD_STRENGTH - Static variable in class nxopen.uf.UFSf.DursolStressCriterion
-
- YIELD_STRESS - Static variable in class nxopen.cae.DurabilityEventStrengthSettingsBuilder.StressCriterionEnum
-
Yield Stress
- yieldStress() - Method in interface nxopen.features.sheetmetal.MetaformBuilder
-
Returns the yield stress
License requirements: None.
- YIMAGINARY - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ComplexVectorType
-
- YLABEL - Static variable in class nxopen.cae.xyplot.TextType
-
Y Axis name label
- ylaw() - Method in interface nxopen.features.LawCurveBuilder
-
Returns the y law
License requirements: None.
- yLength - Variable in class nxopen.uf.UFDrf.StrokeInfo
-
- YM - Static variable in class nxopen.cam.fbm.FeatureGeometry.SequenceDirectionType
-
Direction: YM
- YM - Static variable in class nxopen.cam.PartAxisBuilder.PartAxisOfRotationTypes
-
+YM
- YM - Static variable in class nxopen.cam.ProbeInspectPointMoveBuilder.Direction
-
YM
- YM - Static variable in class nxopen.cam.RotaryFinishGeomBuilder.PartAxisOfRotationTypes
-
+YM
- YM - Static variable in class nxopen.cam.ToolPathTiltMachine.ToolMainMcsTypes
-
tool rotation MCS +YM
- YM_XM_ZM - Static variable in class nxopen.cam.LaserLinearMove.MoveTypes
-
YM -> XM -> ZM
- YM_ZM_XM - Static variable in class nxopen.cam.LaserLinearMove.MoveTypes
-
YM -> ZM -> XM
- ymass() - Method in interface nxopen.motion.NormalModeProperty
-
Returns the percent mass of Y direction component
License requirements: mechanisms ("MECHANISMS")
.
- ymax() - Method in interface nxopen.features.shipdesign.MainDimensionsBuilder
-
Returns the expression containing the y max value.
- ymax() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the y max
License requirements: None.
- ymaxDatumFilter() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the y max datum filter
License requirements: None.
- ymaxOffset() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the y max offset
License requirements: None.
- ymin() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the y min
License requirements: None.
- yminDatumFilter() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the y min datum filter
License requirements: None.
- yminOffset() - Method in interface nxopen.features.shipdesign.ShipSectionBuilder
-
Returns the y min offset
License requirements: None.
- ymountBuilder() - Method in interface nxopen.cam.TurningToolBuilder
-
Returns the y mount builder (inheritable double)
License requirements: cam_base ("CAM BASE")
.
- YNEGATIVE - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.ViewDirectionType
-
- ynMax - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment maximum slave value in normalized range
- ynMin - Variable in class nxopen.mechatronics.CamProfileBuilder.Element
-
segment minimum slave value in normalized range
- ynum() - Method in interface nxopen.fields.DisplayPropertiesBuilder
-
Returns the y num
License requirements: None.
- YNUMBER - Static variable in class nxopen.cae.xyplot.TextType
-
Y Axis number label
- yoff - Variable in class nxopen.uf.UFCutter.TurnTrackingPointData
-
- yoff - Variable in class nxopen.uf.UFPath.TrackingPointChange
-
- yoffset() - Method in interface nxopen.cae.Mesh0dBuilder
-
Returns the y-offset from cg of the lumped mass element
License requirements: nx_masterfem ("Finite Element Modeling")
.
- yoffset() - Method in interface nxopen.cam.RotateToolMoveBuilder
-
Returns the Y offset
License requirements: None.
- yoffset() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool Yoffset builder
License requirements: None.
- yoffset - Variable in class nxopen.cam.TrackingBuilder.Data
-
the yoffset
- yoffset() - Method in interface nxopen.die.HeelpostBuilder
-
Returns the offset applied in the Y direction to determine the hole center
License requirements: None.
- yoffset() - Method in interface nxopen.die.PressureSystemParentBuilder
-
Returns the y offset of pressure systems.
- yoffset() - Method in interface nxopen.die.RibParentBuilder
-
Returns the y offset of die ribs.
- yoffset() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the expression defining the value of the offset to apply in the Y direction.
- yoffset() - Method in interface nxopen.PlotBuilder
-
Returns the Y coordinate offset of a banner.
- yOffset - Variable in class nxopen.uf.UFModlFeatures.AskRectangularPatternFaceData
-
- yoffsetenda - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Y offset to shear center in nodal displacement coordinate system for End A in units mm or in.
- yoffsetendb - Variable in class nxopen.cae.ElementAssociatedDataUtils.AskBeamData
-
Y offset to shear center in nodal displacement coordinate system for End B in units mm or in.
- yOffsetFactor - Variable in class nxopen.annotations.Annotation.AssociativeOriginData
-
Y Offset factor from
associated point.
- yOffsetFactor - Variable in class nxopen.uf.UFDrf.AssociativeOrigin
-
- yoffsetToggle() - Method in interface nxopen.cam.RotateToolMoveBuilder
-
Returns the Y offset Toggle Status
License requirements: None.
- yoffsetToggle() - Method in interface nxopen.cam.ToolChangeCiBuilder
-
Returns the Tool Yoffset toggle
License requirements: None.
- yoffsetValue - Variable in class nxopen.uf.UFPath.ToolChange
-
- yokeType() - Method in interface nxopen.motion.JointFrictionAdams
-
Returns the yoke type
License requirements: mechanisms ("MECHANISMS")
.
- yokeType() - Method in interface nxopen.motion.JointFrictionRecurDyn
-
Returns the yoke type
License requirements: mechanisms ("MECHANISMS")
.
- YONLY - Static variable in class nxopen.features.ProjectCurveBuilder.ArcLengthType
-
Represents Y only
- yonPathSpacing() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the on path instance spacing along the y path
License requirements: None.
- yoption() - Method in interface nxopen.cae.NodeModifyLocationBuilder
-
Returns the y option
License requirements: None.
- youngModulus() - Method in interface nxopen.motion.CustomizedMaterialBuilder
-
Returns the Young modulus
License requirements: mechanisms ("MECHANISMS")
.
- youngsModulusFromBulkLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the youngs modulus from bulk modulus and 1st Lame constant.
- youngsModulusFromBulkPoisson(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the youngs modulus from bulk modulus and poisson ratio.
- youngsModulusFromBulkShear(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the youngs modulus from bulk modulus and shear modulus.
- youngsModulusFromPoissonLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the youngs modulus from 1st Lame constant and poisson ratio.
- youngsModulusFromPoissonShear(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the youngs modulus from shear modulus and poisson ratio.
- youngsModulusFromShearLame(double, double) - Method in interface nxopen.EngineeringFunction
-
Calculate the youngs modulus from shear modulus and 1st Lame constant.
- youtput() - Method in interface nxopen.cam.AlongMachineAxisMoveBuilder
-
Returns the Y output
License requirements: None.
- ypath() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the y path, which can be any continuous section
License requirements: None.
- ypathOption() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the y path options
License requirements: None.
- yplaneUserDefined() - Method in interface nxopen.features.shipdesign.ShellTemplateBuilder
-
Returns the value specifying that the plane for the Y direction was user defined.
- YPLUS - Static variable in class nxopen.cae.Result.Quantity
-
- YPLUS_ON_NEGATIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity
-
- YPLUS_ON_POSITIVE_SIDE - Static variable in class nxopen.cae.Result.Quantity
-
- yposition() - Method in interface nxopen.features.shipdesign.SectionViewBuilder
-
Returns the ship section view Y position
License requirements: None.
- YPOSITIVE - Static variable in class nxopen.features.shipdesign.GeneralArrangementViewBuilder.ViewDirectionType
-
- yprofile() - Method in interface nxopen.motion.VObject
-
Returns the y profile
License requirements: None.
- YREACTION_FORCE - Static variable in class nxopen.cae.Result.Quantity
-
- YREACTION_MOMENT - Static variable in class nxopen.cae.Result.Quantity
-
- YREAL - Static variable in class nxopen.fields.DisplayPropertiesBuilder.ComplexVectorType
-
- yref() - Method in interface nxopen.tooling.LayoutBuilder
-
Returns the layout cavity number in Y-axis
License requirements: None.
- yrefValue() - Method in interface nxopen.tooling.ElectrodeBlankBuilder
-
Returns the Y value of the blank origin in the current machine set coordinator.
- yresultComponent() - Method in interface nxopen.cae.PostGraphOrbitBuilder
-
Returns the component used as y axis for orbit plot
License requirements: nx_masterfem ("Finite Element Modeling") OR nx_design_sim ("NX Design Simulation") OR sc_results_viewer (" Simcenter Results Viewer")
.
- YROTATION - Static variable in class nxopen.cae.Result.Quantity
-
- yrotationDOFMode() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the y rotation dofmode
License requirements: None.
- yrotationLowerLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the y rotation lower limit
License requirements: None.
- yrotationUpperLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the y rotation upper limit
License requirements: None.
- yscaleFactor() - Method in interface nxopen.cae.NodeTranslateBuilder
-
Returns the y scale factor
License requirements: None.
- ysegmentOriginCoord() - Method in interface nxopen.motion.RoadBuilder
-
Returns the y origin coord for the segments for the road object of type path
License requirements: mechanisms ("MECHANISMS")
.
- ysegments() - Method in interface nxopen.features.subdivision.SubdivisionPrimitiveShapeBuilderEx
-
Returns the number of segments in Y direction.
- yselection() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the direction object.
- yshift() - Method in interface nxopen.tooling.BlankLayoutBuilder
-
Returns the value to shift the blank in the Y direction.
- ySize - Variable in class nxopen.preferences.SessionVisualizationHighQualityImage.ImageSizeData
-
Y Pixel size.
- yspacing() - Method in interface nxopen.geometricutilities.AlongPathPattern
-
Returns the instance spacing along the y axis
License requirements: None.
- yspacing() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the instance spacing along the y axis
License requirements: None.
- ystiffnessConstant() - Method in interface nxopen.cae.connections.IStiffness
-
Returns the Y stiffness constant
License requirements: None.
- ystiffnessDynamic() - Method in interface nxopen.cae.connections.IStiffnessDynamic
-
Returns the Y stiffness dynamic
License requirements: None.
- ystructuralDampingConstant() - Method in interface nxopen.cae.connections.IStructuralDamping
-
Returns the Y structural damping constant
License requirements: None.
- ystructuralDampingDynamic() - Method in interface nxopen.cae.connections.IStructuralDampingDynamic
-
Returns the Y structural damping dynamic
License requirements: None.
- ysumInteger() - Method in interface nxopen.tooldesigner.SelectDatumsBuilder
-
Returns the y sum integer
License requirements: fp_fixture_planner ("FULL FIXTURE PLANNER")
.
- ysymmetryToggle() - Method in interface nxopen.geometricutilities.RectangularPattern
-
Returns the YSymmetry toggle attribute.
- ytDatumLetter() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the yt datum letter
License requirements: None.
- ytDistance() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the yt distance
License requirements: None.
- ytFeature() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the yt feature
License requirements: None.
- ytFeatureSelect() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the yt feature select
License requirements: None.
- ytMethod() - Method in interface nxopen.cam.InspectionAlignmentBuilder
-
Returns the yt method
License requirements: None.
- ytranslationDOFMode() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the y translation dofmode
License requirements: None.
- ytranslationLowerLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the y translation lower limit
License requirements: None.
- ytranslationUpperLimit() - Method in interface nxopen.cam.InspectionToleranceOperationBuilder
-
Returns the y translation upper limit
License requirements: None.
- yUnit - Variable in class nxopen.cae.AfuData.AbscissaAndOrdinateAxisDefinitionData
-
Unit Code of ordinate data
- yUnit - Variable in class nxopen.cae.ftk.OptionSetting.RecordOptionData
-
Ordinate Numerator Unit Code of AFU data
- yUnit - Variable in class nxopen.cae.FunctionBuilder.UnitsData
-
- yval - Variable in class nxopen.uf.UFSim.AskInitJunctionXformData
-
- yval - Variable in class nxopen.uf.UFSim.AskJunctionXformData
-
- yval - Variable in class nxopen.uf.UFSim.AskToolOffsetsData
-
- yval - Variable in class nxopen.uf.UFSim.TransformOffsetAcsToMtcsData
-
- yvalue() - Method in interface nxopen.features.ToolingBoxBuilder
-
Returns the edge length in Y direction for general box.
- yvalue() - Method in interface nxopen.tooling.CreateBoxBuilder
-
Returns the edge length in Y direction for general box.
- yValues - Variable in class nxopen.cae.AfuData.ComplexData
-
Ordinate element data values for real part or magnitude part
- yValues - Variable in class nxopen.cae.AfuData.RealData
-
Ordinate element data values
- yValues - Variable in class nxopen.cae.AfuDataConvertor.FftFrequencyData
-
Real part of Y values of the output data
- yValues - Variable in class nxopen.cae.AfuDataConvertor.FftTimeData
-
Y values of the output data
- yVec(double[]) - Method in interface nxopen.uf.UFMtx2
-
- yVec(double[]) - Method in interface nxopen.uf.UFMtx3
-
- yVec(double[]) - Method in interface nxopen.uf.UFMtx4
-
- yvector() - Method in interface nxopen.features.PatternFaceBuilder
-
Returns the Y direction of rectangular pattern, don't use it until nx502
License requirements: None.
- yVector - Variable in class nxopen.routing.OffsetPath.OffsetReferenceAxesData
-
Y reference axes for the offset object
- yviscousDampingConstant() - Method in interface nxopen.cae.connections.IViscousDamping
-
Returns the Y viscous damping constant
License requirements: None.
- yviscousDampingDynamic() - Method in interface nxopen.cae.connections.IViscousDampingDynamic
-
Returns the Y viscous damping dynamic
License requirements: None.
- ywidth() - Method in interface nxopen.features.shipdesign.PlatePreparationBuilder
-
Returns the expression containing the width in y direction.
- YX - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
YX component of a tensor
- YX - Static variable in class nxopen.cae.xyplot.CoordinateType
-
swap x and y
- yx - Variable in class nxopen.Matrix3x3
-
- YXZ - Static variable in class nxopen.cae.xyplot.CoordinateType
-
swap x and y
- YXZ - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.TraversalOrder
-
- YXZ - Static variable in class nxopen.routing.HealMethod
-
- YY - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
YY component of a tensor
- YY - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- YY - Static variable in class nxopen.cae.Result.Component
-
- YY - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- YY - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TensorType
-
- yy - Variable in class nxopen.Matrix3x3
-
- YYMMMDD - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
- YYSTRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- YYSTRESS - Static variable in class nxopen.cae.Result.Quantity
-
- YYYYMMDD - Static variable in class nxopen.annotations.TableCellStyleBuilder.DateFormatTypes
-
- YZ - Static variable in class nxopen.cae.PostScenarioVariantComponent
-
YZ component of a tensor
- YZ - Static variable in class nxopen.cae.responsesimulation.DirectionDataComponent
-
- YZ - Static variable in class nxopen.cae.Result.Component
-
- YZ - Static variable in class nxopen.cam.RotaryPolarMoveBuilder.LockPlaneType
-
YZ-Plane
- YZ - Static variable in class nxopen.display.EnvironmentBuilder.GroundPlaneTypes
-
Use yz plane for the ground.
- YZ - Static variable in class nxopen.display.Stage.OrientationType
-
Use yz plane for the stage floor.
- YZ - Static variable in class nxopen.features.DatumPlaneBuilder.FixedType
-
Fixed datum plane thru YZ plane
- YZ - Static variable in class nxopen.features.EdgeSymmetryBuilder.SymmetryPlaneOptions
-
Uses YC-ZC plane as plane of symmetry
- YZ - Static variable in class nxopen.features.PolylineBuilder.DrawingPlaneOptions
-
YZ plane
- YZ - Static variable in class nxopen.features.PolylineBuilder.WCSOptionType
-
In YZ plane
- YZ - Static variable in class nxopen.features.StudioSplineBuilderEx.DrawingPlaneOptions
-
YZ plane
- YZ - Static variable in class nxopen.features.StudioSplineBuilderEx.WCSOptionType
-
In YZ plane
- YZ - Static variable in class nxopen.features.StudioXformBuilderEx.PlanarizeProjectionPlaneType
-
On Y-Z plane when planarize
- YZ - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalMovementDirectionType
-
Translate on Y-Z plane
- YZ - Static variable in class nxopen.features.StudioXformBuilderEx.PrincipalScalingDirectionType
-
Scale on Y-Z plane
- YZ - Static variable in class nxopen.features.subdivision.TransformCageData.WCSOptionType
-
In YZ plane
- YZ - Static variable in class nxopen.features.TabNoteCfgBuilder.Refplane
-
1 : Yc-Zc plane
- YZ - Static variable in class nxopen.fields.DisplayPropertiesBuilder.BalStrainType
-
- YZ - Static variable in class nxopen.fields.DisplayPropertiesBuilder.TensorType
-
- YZ - Static variable in class nxopen.geometricanalysis.HighlightLinesAnalysisBuilder.LightPlaneOptions
-
Uses YC-ZC plane as light plane
- YZ - Static variable in class nxopen.geometricutilities.CurveShapingBuilder.WCSOptionType
-
In YZ plane
- YZ - Static variable in class nxopen.geometricutilities.MovePoleBuilder.WCSDirectionType
-
- YZ - Static variable in class nxopen.geometricutilities.OrientXpressBuilder.Plane
-
Active plane is parallel to yz-plane
- yz - Variable in class nxopen.Matrix3x3
-
- YZ - Static variable in class nxopen.motion.GraphBuilder.ComponentChoices
-
Deprecated.
YZ
- YZ_OF_WCS - Static variable in class nxopen.annotations.PmiDefaultPlane
-
- YZ_PLANE - Static variable in class nxopen.annotations.PlaneBuilder.PlaneMethodType
-
YZ of the WCS
- YZPLANE - Static variable in class nxopen.weld.WeldLabelBuilder.OrientationPlaneType
-
- YZPLANE - Static variable in class nxopen.weld.WeldPmiBuilder.OrientationPlaneType
-
- YZSTRAIN - Static variable in class nxopen.cae.Result.Quantity
-
- YZSTRESS - Static variable in class nxopen.cae.Result.Quantity
-
- YZX - Static variable in class nxopen.cae.xyplot.CoordinateType
-
swap x and y firstly and then swap y and z
- YZX - Static variable in class nxopen.mechanicalrouting.PathTransitionBuilder.TraversalOrder
-
- YZX - Static variable in class nxopen.routing.HealMethod
-